Linux-libre 4.7.1-gnupck-4.7.1-gnu

1 files changed, 0 insertions, 124 deletions

diff --git a/drivers/net/dsa/mv88e6123.c b/drivers/net/dsa/mv88e6123.c
deleted file mode 100644
index 69a6f79dc..000000000
--- a/drivers/net/dsa/mv88e6123.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
- * Copyright (c) 2008-2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <net/dsa.h>
-#include "mv88e6xxx.h"
-
-static const struct mv88e6xxx_switch_id mv88e6123_table[] = {
-	{ PORT_SWITCH_ID_6123, "Marvell 88E6123" },
-	{ PORT_SWITCH_ID_6123_A1, "Marvell 88E6123 (A1)" },
-	{ PORT_SWITCH_ID_6123_A2, "Marvell 88E6123 (A2)" },
-	{ PORT_SWITCH_ID_6161, "Marvell 88E6161" },
-	{ PORT_SWITCH_ID_6161_A1, "Marvell 88E6161 (A1)" },
-	{ PORT_SWITCH_ID_6161_A2, "Marvell 88E6161 (A2)" },
-	{ PORT_SWITCH_ID_6165, "Marvell 88E6165" },
-	{ PORT_SWITCH_ID_6165_A1, "Marvell 88E6165 (A1)" },
-	{ PORT_SWITCH_ID_6165_A2, "Marvell 88e6165 (A2)" },
-};
-
-static char *mv88e6123_probe(struct device *host_dev, int sw_addr)
-{
-	return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6123_table,
-				     ARRAY_SIZE(mv88e6123_table));
-}
-
-static int mv88e6123_setup_global(struct dsa_switch *ds)
-{
-	u32 upstream_port = dsa_upstream_port(ds);
-	int ret;
-	u32 reg;
-
-	ret = mv88e6xxx_setup_global(ds);
-	if (ret)
-		return ret;
-
-	/* Disable the PHY polling unit (since there won't be any
-	 * external PHYs to poll), don't discard packets with
-	 * excessive collisions, and mask all interrupt sources.
-	 */
-	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, 0x0000);
-
-	/* Configure the upstream port, and configure the upstream
-	 * port as the port to which ingress and egress monitor frames
-	 * are to be sent.
-	 */
-	reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
-	REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
-
-	/* Disable remote management for now, and set the switch's
-	 * DSA device number.
-	 */
-	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, ds->index & 0x1f);
-
-	return 0;
-}
-
-static int mv88e6123_setup(struct dsa_switch *ds)
-{
-	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
-	int ret;
-
-	ret = mv88e6xxx_setup_common(ds);
-	if (ret < 0)
-		return ret;
-
-	switch (ps->id) {
-	case PORT_SWITCH_ID_6123:
-		ps->num_ports = 3;
-		break;
-	case PORT_SWITCH_ID_6161:
-	case PORT_SWITCH_ID_6165:
-		ps->num_ports = 6;
-		break;
-	default:
-		return -ENODEV;
-	}
-
-	ret = mv88e6xxx_switch_reset(ds, false);
-	if (ret < 0)
-		return ret;
-
-	ret = mv88e6123_setup_global(ds);
-	if (ret < 0)
-		return ret;
-
-	return mv88e6xxx_setup_ports(ds);
-}
-
-struct dsa_switch_driver mv88e6123_switch_driver = {
-	.tag_protocol		= DSA_TAG_PROTO_EDSA,
-	.priv_size		= sizeof(struct mv88e6xxx_priv_state),
-	.probe			= mv88e6123_probe,
-	.setup			= mv88e6123_setup,
-	.set_addr		= mv88e6xxx_set_addr_indirect,
-	.phy_read		= mv88e6xxx_phy_read,
-	.phy_write		= mv88e6xxx_phy_write,
-	.get_strings		= mv88e6xxx_get_strings,
-	.get_ethtool_stats	= mv88e6xxx_get_ethtool_stats,
-	.get_sset_count		= mv88e6xxx_get_sset_count,
-	.adjust_link		= mv88e6xxx_adjust_link,
-#ifdef CONFIG_NET_DSA_HWMON
-	.get_temp		= mv88e6xxx_get_temp,
-#endif
-	.get_regs_len		= mv88e6xxx_get_regs_len,
-	.get_regs		= mv88e6xxx_get_regs,
-};
-
-MODULE_ALIAS("platform:mv88e6123");
-MODULE_ALIAS("platform:mv88e6161");
-MODULE_ALIAS("platform:mv88e6165");