Linux-libre 4.7.1-gnupck-4.7.1-gnu

1 files changed, 0 insertions, 177 deletions

diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
deleted file mode 100644
index a92ca651c..000000000
--- a/drivers/net/dsa/mv88e6131.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support
- * Copyright (c) 2008-2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <net/dsa.h>
-#include "mv88e6xxx.h"
-
-static const struct mv88e6xxx_switch_id mv88e6131_table[] = {
-	{ PORT_SWITCH_ID_6085, "Marvell 88E6085" },
-	{ PORT_SWITCH_ID_6095, "Marvell 88E6095/88E6095F" },
-	{ PORT_SWITCH_ID_6131, "Marvell 88E6131" },
-	{ PORT_SWITCH_ID_6131_B2, "Marvell 88E6131 (B2)" },
-	{ PORT_SWITCH_ID_6185, "Marvell 88E6185" },
-};
-
-static char *mv88e6131_probe(struct device *host_dev, int sw_addr)
-{
-	return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6131_table,
-				     ARRAY_SIZE(mv88e6131_table));
-}
-
-static int mv88e6131_setup_global(struct dsa_switch *ds)
-{
-	u32 upstream_port = dsa_upstream_port(ds);
-	int ret;
-	u32 reg;
-
-	ret = mv88e6xxx_setup_global(ds);
-	if (ret)
-		return ret;
-
-	/* Enable the PHY polling unit, don't discard packets with
-	 * excessive collisions, use a weighted fair queueing scheme
-	 * to arbitrate between packet queues, set the maximum frame
-	 * size to 1632, and mask all interrupt sources.
-	 */
-	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
-		  GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_MAX_FRAME_1632);
-
-	/* Set the VLAN ethertype to 0x8100. */
-	REG_WRITE(REG_GLOBAL, GLOBAL_CORE_TAG_TYPE, 0x8100);
-
-	/* Disable ARP mirroring, and configure the upstream port as
-	 * the port to which ingress and egress monitor frames are to
-	 * be sent.
-	 */
-	reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
-		upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
-		GLOBAL_MONITOR_CONTROL_ARP_DISABLED;
-	REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
-
-	/* Disable cascade port functionality unless this device
-	 * is used in a cascade configuration, and set the switch's
-	 * DSA device number.
-	 */
-	if (ds->dst->pd->nr_chips > 1)
-		REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2,
-			  GLOBAL_CONTROL_2_MULTIPLE_CASCADE |
-			  (ds->index & 0x1f));
-	else
-		REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2,
-			  GLOBAL_CONTROL_2_NO_CASCADE |
-			  (ds->index & 0x1f));
-
-	/* Force the priority of IGMP/MLD snoop frames and ARP frames
-	 * to the highest setting.
-	 */
-	REG_WRITE(REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE,
-		  GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP |
-		  7 << GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT |
-		  GLOBAL2_PRIO_OVERRIDE_FORCE_ARP |
-		  7 << GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT);
-
-	return 0;
-}
-
-static int mv88e6131_setup(struct dsa_switch *ds)
-{
-	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
-	int ret;
-
-	ret = mv88e6xxx_setup_common(ds);
-	if (ret < 0)
-		return ret;
-
-	mv88e6xxx_ppu_state_init(ds);
-
-	switch (ps->id) {
-	case PORT_SWITCH_ID_6085:
-	case PORT_SWITCH_ID_6185:
-		ps->num_ports = 10;
-		break;
-	case PORT_SWITCH_ID_6095:
-		ps->num_ports = 11;
-		break;
-	case PORT_SWITCH_ID_6131:
-	case PORT_SWITCH_ID_6131_B2:
-		ps->num_ports = 8;
-		break;
-	default:
-		return -ENODEV;
-	}
-
-	ret = mv88e6xxx_switch_reset(ds, false);
-	if (ret < 0)
-		return ret;
-
-	ret = mv88e6131_setup_global(ds);
-	if (ret < 0)
-		return ret;
-
-	return mv88e6xxx_setup_ports(ds);
-}
-
-static int mv88e6131_port_to_phy_addr(struct dsa_switch *ds, int port)
-{
-	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
-
-	if (port >= 0 && port < ps->num_ports)
-		return port;
-
-	return -EINVAL;
-}
-
-static int
-mv88e6131_phy_read(struct dsa_switch *ds, int port, int regnum)
-{
-	int addr = mv88e6131_port_to_phy_addr(ds, port);
-
-	if (addr < 0)
-		return addr;
-
-	return mv88e6xxx_phy_read_ppu(ds, addr, regnum);
-}
-
-static int
-mv88e6131_phy_write(struct dsa_switch *ds,
-			      int port, int regnum, u16 val)
-{
-	int addr = mv88e6131_port_to_phy_addr(ds, port);
-
-	if (addr < 0)
-		return addr;
-
-	return mv88e6xxx_phy_write_ppu(ds, addr, regnum, val);
-}
-
-struct dsa_switch_driver mv88e6131_switch_driver = {
-	.tag_protocol		= DSA_TAG_PROTO_DSA,
-	.priv_size		= sizeof(struct mv88e6xxx_priv_state),
-	.probe			= mv88e6131_probe,
-	.setup			= mv88e6131_setup,
-	.set_addr		= mv88e6xxx_set_addr_direct,
-	.phy_read		= mv88e6131_phy_read,
-	.phy_write		= mv88e6131_phy_write,
-	.get_strings		= mv88e6xxx_get_strings,
-	.get_ethtool_stats	= mv88e6xxx_get_ethtool_stats,
-	.get_sset_count		= mv88e6xxx_get_sset_count,
-	.adjust_link		= mv88e6xxx_adjust_link,
-};
-
-MODULE_ALIAS("platform:mv88e6085");
-MODULE_ALIAS("platform:mv88e6095");
-MODULE_ALIAS("platform:mv88e6095f");
-MODULE_ALIAS("platform:mv88e6131");