summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/mv88e6352.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/net/dsa/mv88e6352.c
Initial import
Diffstat (limited to 'drivers/net/dsa/mv88e6352.c')
-rw-r--r--drivers/net/dsa/mv88e6352.c554
1 files changed, 554 insertions, 0 deletions
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
new file mode 100644
index 000000000..126c11b81
--- /dev/null
+++ b/drivers/net/dsa/mv88e6352.c
@@ -0,0 +1,554 @@
+/*
+ * net/dsa/mv88e6352.c - Marvell 88e6352 switch chip support
+ *
+ * Copyright (c) 2014 Guenter Roeck
+ *
+ * Derived from mv88e6123_61_65.c
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+ int ret;
+
+ if (bus == NULL)
+ return NULL;
+
+ ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID);
+ if (ret >= 0) {
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6176)
+ return "Marvell 88E6176";
+ if (ret == PORT_SWITCH_ID_6352_A0)
+ return "Marvell 88E6352 (A0)";
+ if (ret == PORT_SWITCH_ID_6352_A1)
+ return "Marvell 88E6352 (A1)";
+ if ((ret & 0xfff0) == PORT_SWITCH_ID_6352)
+ return "Marvell 88E6352";
+ }
+
+ return NULL;
+}
+
+static int mv88e6352_setup_global(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+ int i;
+
+ /* Discard packets with excessive collisions,
+ * mask all interrupt sources, enable PPU (bit 14, undocumented).
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x6000);
+
+ /* Set the default address aging time to 5 minutes, and
+ * enable address learn messages to be sent to all message
+ * ports.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+ /* Configure the priority mapping registers. */
+ ret = mv88e6xxx_config_prio(ds);
+ if (ret < 0)
+ return ret;
+
+ /* Configure the upstream port, and configure the upstream
+ * port as the port to which ingress and egress monitor frames
+ * are to be sent.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
+
+ /* Disable remote management for now, and set the switch's
+ * DSA device number.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:2x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:0x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+ /* Disable the loopback filter, disable flow control
+ * messages, disable flood broadcast override, disable
+ * removing of provider tags, disable ATU age violation
+ * interrupts, disable tag flow control, force flow
+ * control priority to the highest, and send all special
+ * multicast frames to the CPU at the highest priority.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+ /* Program the DSA routing table. */
+ for (i = 0; i < 32; i++) {
+ int nexthop = 0x1f;
+
+ if (i != ds->index && i < ds->dst->pd->nr_chips)
+ nexthop = ds->pd->rtable[i] & 0x1f;
+
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+ }
+
+ /* Clear all trunk masks. */
+ for (i = 0; i < 8; i++)
+ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7f);
+
+ /* Clear all trunk mappings. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+ /* Disable ingress rate limiting by resetting all ingress
+ * rate limit registers to their initial state.
+ */
+ for (i = 0; i < ps->num_ports; i++)
+ REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+ /* Initialise cross-chip port VLAN table to reset defaults. */
+ REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+ /* Clear the priority override table. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+ /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+ return 0;
+}
+
+static int mv88e6352_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+ u16 val;
+
+ /* MAC Forcing register: don't force link, speed, duplex
+ * or flow control state to any particular values on physical
+ * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+ * full duplex.
+ */
+ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+ REG_WRITE(addr, 0x01, 0x003e);
+ else
+ REG_WRITE(addr, 0x01, 0x0003);
+
+ /* Do not limit the period of time that this port can be
+ * paused for by the remote end or the period of time that
+ * this port can pause the remote end.
+ */
+ REG_WRITE(addr, 0x02, 0x0000);
+
+ /* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+ * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+ * tunneling, determine priority by looking at 802.1p and IP
+ * priority fields (IP prio has precedence), and set STP state
+ * to Forwarding.
+ *
+ * If this is the CPU link, use DSA or EDSA tagging depending
+ * on which tagging mode was configured.
+ *
+ * If this is a link to another switch, use DSA tagging mode.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown unicasts and multicasts.
+ */
+ val = 0x0433;
+ if (dsa_is_cpu_port(ds, p)) {
+ if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
+ val |= 0x3300;
+ else
+ val |= 0x0100;
+ }
+ if (ds->dsa_port_mask & (1 << p))
+ val |= 0x0100;
+ if (p == dsa_upstream_port(ds))
+ val |= 0x000c;
+ REG_WRITE(addr, 0x04, val);
+
+ /* Port Control 2: don't force a good FCS, set the maximum
+ * frame size to 10240 bytes, don't let the switch add or
+ * strip 802.1q tags, don't discard tagged or untagged frames
+ * on this port, do a destination address lookup on all
+ * received packets as usual, disable ARP mirroring and don't
+ * send a copy of all transmitted/received frames on this port
+ * to the CPU.
+ */
+ REG_WRITE(addr, 0x08, 0x2080);
+
+ /* Egress rate control: disable egress rate control. */
+ REG_WRITE(addr, 0x09, 0x0001);
+
+ /* Egress rate control 2: disable egress rate control. */
+ REG_WRITE(addr, 0x0a, 0x0000);
+
+ /* Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ /* Port ATU control: disable limiting the number of address
+ * database entries that this port is allowed to use.
+ */
+ REG_WRITE(addr, 0x0c, 0x0000);
+
+ /* Priority Override: disable DA, SA and VTU priority override. */
+ REG_WRITE(addr, 0x0d, 0x0000);
+
+ /* Port Ethertype: use the Ethertype DSA Ethertype value. */
+ REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+ /* Tag Remap: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x18, 0x3210);
+
+ /* Tag Remap 2: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x19, 0x7654);
+
+ return mv88e6xxx_setup_port_common(ds, p);
+}
+
+#ifdef CONFIG_NET_DSA_HWMON
+
+static int mv88e6352_get_temp(struct dsa_switch *ds, int *temp)
+{
+ int ret;
+
+ *temp = 0;
+
+ ret = mv88e6xxx_phy_page_read(ds, 0, 6, 27);
+ if (ret < 0)
+ return ret;
+
+ *temp = (ret & 0xff) - 25;
+
+ return 0;
+}
+
+static int mv88e6352_get_temp_limit(struct dsa_switch *ds, int *temp)
+{
+ int ret;
+
+ *temp = 0;
+
+ ret = mv88e6xxx_phy_page_read(ds, 0, 6, 26);
+ if (ret < 0)
+ return ret;
+
+ *temp = (((ret >> 8) & 0x1f) * 5) - 25;
+
+ return 0;
+}
+
+static int mv88e6352_set_temp_limit(struct dsa_switch *ds, int temp)
+{
+ int ret;
+
+ ret = mv88e6xxx_phy_page_read(ds, 0, 6, 26);
+ if (ret < 0)
+ return ret;
+ temp = clamp_val(DIV_ROUND_CLOSEST(temp, 5) + 5, 0, 0x1f);
+ return mv88e6xxx_phy_page_write(ds, 0, 6, 26,
+ (ret & 0xe0ff) | (temp << 8));
+}
+
+static int mv88e6352_get_temp_alarm(struct dsa_switch *ds, bool *alarm)
+{
+ int ret;
+
+ *alarm = false;
+
+ ret = mv88e6xxx_phy_page_read(ds, 0, 6, 26);
+ if (ret < 0)
+ return ret;
+
+ *alarm = !!(ret & 0x40);
+
+ return 0;
+}
+#endif /* CONFIG_NET_DSA_HWMON */
+
+static int mv88e6352_setup(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+ int i;
+
+ ret = mv88e6xxx_setup_common(ds);
+ if (ret < 0)
+ return ret;
+
+ ps->num_ports = 7;
+
+ mutex_init(&ps->eeprom_mutex);
+
+ ret = mv88e6xxx_switch_reset(ds, true);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise vtu and atu */
+
+ ret = mv88e6352_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ps->num_ports; i++) {
+ ret = mv88e6352_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6352_read_eeprom_word(struct dsa_switch *ds, int addr)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->eeprom_mutex);
+
+ ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x14,
+ 0xc000 | (addr & 0xff));
+ if (ret < 0)
+ goto error;
+
+ ret = mv88e6xxx_eeprom_busy_wait(ds);
+ if (ret < 0)
+ goto error;
+
+ ret = mv88e6xxx_reg_read(ds, REG_GLOBAL2, 0x15);
+error:
+ mutex_unlock(&ps->eeprom_mutex);
+ return ret;
+}
+
+static int mv88e6352_get_eeprom(struct dsa_switch *ds,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ int offset;
+ int len;
+ int ret;
+
+ offset = eeprom->offset;
+ len = eeprom->len;
+ eeprom->len = 0;
+
+ eeprom->magic = 0xc3ec4951;
+
+ ret = mv88e6xxx_eeprom_load_wait(ds);
+ if (ret < 0)
+ return ret;
+
+ if (offset & 1) {
+ int word;
+
+ word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+ if (word < 0)
+ return word;
+
+ *data++ = (word >> 8) & 0xff;
+
+ offset++;
+ len--;
+ eeprom->len++;
+ }
+
+ while (len >= 2) {
+ int word;
+
+ word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+ if (word < 0)
+ return word;
+
+ *data++ = word & 0xff;
+ *data++ = (word >> 8) & 0xff;
+
+ offset += 2;
+ len -= 2;
+ eeprom->len += 2;
+ }
+
+ if (len) {
+ int word;
+
+ word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+ if (word < 0)
+ return word;
+
+ *data++ = word & 0xff;
+
+ offset++;
+ len--;
+ eeprom->len++;
+ }
+
+ return 0;
+}
+
+static int mv88e6352_eeprom_is_readonly(struct dsa_switch *ds)
+{
+ int ret;
+
+ ret = mv88e6xxx_reg_read(ds, REG_GLOBAL2, 0x14);
+ if (ret < 0)
+ return ret;
+
+ if (!(ret & 0x0400))
+ return -EROFS;
+
+ return 0;
+}
+
+static int mv88e6352_write_eeprom_word(struct dsa_switch *ds, int addr,
+ u16 data)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ mutex_lock(&ps->eeprom_mutex);
+
+ ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x15, data);
+ if (ret < 0)
+ goto error;
+
+ ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x14,
+ 0xb000 | (addr & 0xff));
+ if (ret < 0)
+ goto error;
+
+ ret = mv88e6xxx_eeprom_busy_wait(ds);
+error:
+ mutex_unlock(&ps->eeprom_mutex);
+ return ret;
+}
+
+static int mv88e6352_set_eeprom(struct dsa_switch *ds,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ int offset;
+ int ret;
+ int len;
+
+ if (eeprom->magic != 0xc3ec4951)
+ return -EINVAL;
+
+ ret = mv88e6352_eeprom_is_readonly(ds);
+ if (ret)
+ return ret;
+
+ offset = eeprom->offset;
+ len = eeprom->len;
+ eeprom->len = 0;
+
+ ret = mv88e6xxx_eeprom_load_wait(ds);
+ if (ret < 0)
+ return ret;
+
+ if (offset & 1) {
+ int word;
+
+ word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+ if (word < 0)
+ return word;
+
+ word = (*data++ << 8) | (word & 0xff);
+
+ ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+ if (ret < 0)
+ return ret;
+
+ offset++;
+ len--;
+ eeprom->len++;
+ }
+
+ while (len >= 2) {
+ int word;
+
+ word = *data++;
+ word |= *data++ << 8;
+
+ ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+ if (ret < 0)
+ return ret;
+
+ offset += 2;
+ len -= 2;
+ eeprom->len += 2;
+ }
+
+ if (len) {
+ int word;
+
+ word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+ if (word < 0)
+ return word;
+
+ word = (word & 0xff00) | *data++;
+
+ ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+ if (ret < 0)
+ return ret;
+
+ offset++;
+ len--;
+ eeprom->len++;
+ }
+
+ return 0;
+}
+
+struct dsa_switch_driver mv88e6352_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
+ .priv_size = sizeof(struct mv88e6xxx_priv_state),
+ .probe = mv88e6352_probe,
+ .setup = mv88e6352_setup,
+ .set_addr = mv88e6xxx_set_addr_indirect,
+ .phy_read = mv88e6xxx_phy_read_indirect,
+ .phy_write = mv88e6xxx_phy_write_indirect,
+ .poll_link = mv88e6xxx_poll_link,
+ .get_strings = mv88e6xxx_get_strings,
+ .get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
+ .get_sset_count = mv88e6xxx_get_sset_count,
+ .set_eee = mv88e6xxx_set_eee,
+ .get_eee = mv88e6xxx_get_eee,
+#ifdef CONFIG_NET_DSA_HWMON
+ .get_temp = mv88e6352_get_temp,
+ .get_temp_limit = mv88e6352_get_temp_limit,
+ .set_temp_limit = mv88e6352_set_temp_limit,
+ .get_temp_alarm = mv88e6352_get_temp_alarm,
+#endif
+ .get_eeprom = mv88e6352_get_eeprom,
+ .set_eeprom = mv88e6352_set_eeprom,
+ .get_regs_len = mv88e6xxx_get_regs_len,
+ .get_regs = mv88e6xxx_get_regs,
+ .port_join_bridge = mv88e6xxx_join_bridge,
+ .port_leave_bridge = mv88e6xxx_leave_bridge,
+ .port_stp_update = mv88e6xxx_port_stp_update,
+ .fdb_add = mv88e6xxx_port_fdb_add,
+ .fdb_del = mv88e6xxx_port_fdb_del,
+ .fdb_getnext = mv88e6xxx_port_fdb_getnext,
+};
+
+MODULE_ALIAS("platform:mv88e6352");