Initial import

1 files changed, 206 insertions, 0 deletions

diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
new file mode 100644
index 000000000..2d89bd00d
--- /dev/null
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -0,0 +1,206 @@
+#
+# 8390 device configuration
+#
+
+config NET_VENDOR_8390
+	bool "National Semi-conductor 8390 devices"
+	default y
+	depends on NET_VENDOR_NATSEMI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Western Digital cards. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+if NET_VENDOR_8390
+
+config PCMCIA_AXNET
+	tristate "Asix AX88190 PCMCIA support"
+	depends on PCMCIA
+	---help---
+	  Say Y here if you intend to attach an Asix AX88190-based PCMCIA
+	  (PC-card) Fast Ethernet card to your computer.  These cards are
+	  nearly NE2000 compatible but need a separate driver due to a few
+	  misfeatures.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called axnet_cs.  If unsure, say N.
+
+config AX88796
+	tristate "ASIX AX88796 NE2000 clone support"
+	depends on (ARM || MIPS || SUPERH)
+	select CRC32
+	select PHYLIB
+	select MDIO_BITBANG
+	---help---
+	  AX88796 driver, using platform bus to provide
+	  chip detection and resources
+
+config AX88796_93CX6
+	bool "ASIX AX88796 external 93CX6 eeprom support"
+	depends on AX88796
+	select EEPROM_93CX6
+	---help---
+	  Select this if your platform comes with an external 93CX6 eeprom.
+
+config HYDRA
+	tristate "Hydra support"
+	depends on ZORRO
+	select CRC32
+	---help---
+	  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called hydra.
+
+config ARM_ETHERH
+	tristate "I-cubed EtherH/ANT EtherM support"
+	depends on ARM && ARCH_ACORN
+	select CRC32
+	---help---
+	  If you have an Acorn system with one of these network cards, you
+	  should say Y to this option if you wish to use it with Linux.
+
+config MAC8390
+	bool "Macintosh NS 8390 based ethernet cards"
+	depends on MAC
+	select CRC32
+	---help---
+	  If you want to include a driver to support Nubus or LC-PDS
+	  Ethernet cards using an NS8390 chipset or its equivalent, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config MCF8390
+	tristate "ColdFire NS8390 based Ethernet support"
+	depends on COLDFIRE
+	select CRC32
+	---help---
+	  This driver is for Ethernet devices using an NS8390-compatible
+	  chipset on many common ColdFire CPU based boards. Many of the older
+	  Freescale dev boards use this, and some other common boards like
+	  some SnapGear routers do as well.
+
+	  If you have one of these boards and want to use the network interface
+	  on them then choose Y. To compile this driver as a module, choose M
+	  here, the module will be called mcf8390.
+
+config NE2000
+	tristate "NE2000/NE1000 support"
+	depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \
+		    ATARI_ETHERNEC)
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Many Ethernet cards
+	  without a specific driver are compatible with NE2000.
+
+	  If you have a PCI NE2000 card however, say N here and Y to "PCI
+	  NE2000 and clone support" below.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ne.
+
+config NE2K_PCI
+	tristate "PCI NE2000 and clones support (see help)"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver is for NE2000 compatible PCI cards. It will not work
+	  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
+	  support" below). If you have a PCI NE2000 network (Ethernet) card,
+	  say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  This driver also works for the following NE2000 clone cards:
+	  RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
+	  NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
+	  Holtek HT80232    Holtek HT80229
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ne2k-pci.
+
+config APNE
+	tristate "PCMCIA NE2000 support"
+	depends on AMIGA_PCMCIA
+	select CRC32
+	---help---
+	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
+	  say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called apne.
+
+config PCMCIA_PCNET
+	tristate "NE2000 compatible PCMCIA support"
+	depends on PCMCIA
+	select CRC32
+	---help---
+	  Say Y here if you intend to attach an NE2000 compatible PCMCIA
+	  (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called pcnet_cs.  If unsure, say N.
+
+config STNIC
+	tristate "National DP83902AV  support"
+	depends on SUPERH
+	select CRC32
+	---help---
+	  Support for cards based on the National Semiconductor DP83902AV
+	  ST-NIC Serial Network Interface Controller for Twisted Pair.  This
+	  is a 10Mbit/sec Ethernet controller.  Product overview and specs at
+	  <http://www.national.com/pf/DP/DP83902A.html>.
+
+	  If unsure, say N.
+
+config ULTRA
+	tristate "SMC Ultra support"
+	depends on ISA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Important: There have been many reports that, with some motherboards
+	  mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
+	  such as some BusLogic models) causes corruption problems with many
+	  operating systems. The Linux smc-ultra driver has a work-around for
+	  this but keep it in mind if you have such a SCSI card and have
+	  problems.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called smc-ultra.
+
+config WD80x3
+	tristate "WD80*3 support"
+	depends on ISA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called wd.
+
+config ZORRO8390
+	tristate "Zorro NS8390-based Ethernet support"
+	depends on ZORRO
+	select CRC32
+	---help---
+	  This driver is for Zorro Ethernet cards using an NS8390-compatible
+	  chipset, like the Village Tronic Ariadne II and the Individual
+	  Computers X-Surf Ethernet cards. If you have such a card, say Y.
+	  Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called zorro8390.
+
+endif # NET_VENDOR_8390