Initial import

1 files changed, 569 insertions, 0 deletions

diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
new file mode 100644
index 000000000..a86af8a74
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -0,0 +1,569 @@
+/****************************************************************************/
+
+/*
+ *	fec.h  --  Fast Ethernet Controller for Motorola ColdFire SoC
+ *		   processors.
+ *
+ *	(C) Copyright 2000-2005, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000-2001, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef FEC_H
+#define	FEC_H
+/****************************************************************************/
+
+#include <linux/clocksource.h>
+#include <linux/net_tstamp.h>
+#include <linux/ptp_clock_kernel.h>
+#include <linux/timecounter.h>
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+    defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
+    defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
+/*
+ *	Just figures, Motorola would have to change the offsets for
+ *	registers in the same peripheral device on different models
+ *	of the ColdFire!
+ */
+#define FEC_IEVENT		0x004 /* Interrupt event reg */
+#define FEC_IMASK		0x008 /* Interrupt mask reg */
+#define FEC_R_DES_ACTIVE_0	0x010 /* Receive descriptor reg */
+#define FEC_X_DES_ACTIVE_0	0x014 /* Transmit descriptor reg */
+#define FEC_ECNTRL		0x024 /* Ethernet control reg */
+#define FEC_MII_DATA		0x040 /* MII manage frame reg */
+#define FEC_MII_SPEED		0x044 /* MII speed control reg */
+#define FEC_MIB_CTRLSTAT	0x064 /* MIB control/status reg */
+#define FEC_R_CNTRL		0x084 /* Receive control reg */
+#define FEC_X_CNTRL		0x0c4 /* Transmit Control reg */
+#define FEC_ADDR_LOW		0x0e4 /* Low 32bits MAC address */
+#define FEC_ADDR_HIGH		0x0e8 /* High 16bits MAC address */
+#define FEC_OPD			0x0ec /* Opcode + Pause duration */
+#define FEC_TXIC0		0x0f0 /* Tx Interrupt Coalescing for ring 0 */
+#define FEC_TXIC1		0x0f4 /* Tx Interrupt Coalescing for ring 1 */
+#define FEC_TXIC2		0x0f8 /* Tx Interrupt Coalescing for ring 2 */
+#define FEC_RXIC0		0x100 /* Rx Interrupt Coalescing for ring 0 */
+#define FEC_RXIC1		0x104 /* Rx Interrupt Coalescing for ring 1 */
+#define FEC_RXIC2		0x108 /* Rx Interrupt Coalescing for ring 2 */
+#define FEC_HASH_TABLE_HIGH	0x118 /* High 32bits hash table */
+#define FEC_HASH_TABLE_LOW	0x11c /* Low 32bits hash table */
+#define FEC_GRP_HASH_TABLE_HIGH	0x120 /* High 32bits hash table */
+#define FEC_GRP_HASH_TABLE_LOW	0x124 /* Low 32bits hash table */
+#define FEC_X_WMRK		0x144 /* FIFO transmit water mark */
+#define FEC_R_BOUND		0x14c /* FIFO receive bound reg */
+#define FEC_R_FSTART		0x150 /* FIFO receive start reg */
+#define FEC_R_DES_START_1	0x160 /* Receive descriptor ring 1 */
+#define FEC_X_DES_START_1	0x164 /* Transmit descriptor ring 1 */
+#define FEC_R_BUFF_SIZE_1	0x168 /* Maximum receive buff ring1 size */
+#define FEC_R_DES_START_2	0x16c /* Receive descriptor ring 2 */
+#define FEC_X_DES_START_2	0x170 /* Transmit descriptor ring 2 */
+#define FEC_R_BUFF_SIZE_2	0x174 /* Maximum receive buff ring2 size */
+#define FEC_R_DES_START_0	0x180 /* Receive descriptor ring */
+#define FEC_X_DES_START_0	0x184 /* Transmit descriptor ring */
+#define FEC_R_BUFF_SIZE_0	0x188 /* Maximum receive buff size */
+#define FEC_R_FIFO_RSFL		0x190 /* Receive FIFO section full threshold */
+#define FEC_R_FIFO_RSEM		0x194 /* Receive FIFO section empty threshold */
+#define FEC_R_FIFO_RAEM		0x198 /* Receive FIFO almost empty threshold */
+#define FEC_R_FIFO_RAFL		0x19c /* Receive FIFO almost full threshold */
+#define FEC_RACC		0x1c4 /* Receive Accelerator function */
+#define FEC_RCMR_1		0x1c8 /* Receive classification match ring 1 */
+#define FEC_RCMR_2		0x1cc /* Receive classification match ring 2 */
+#define FEC_DMA_CFG_1		0x1d8 /* DMA class configuration for ring 1 */
+#define FEC_DMA_CFG_2		0x1dc /* DMA class Configuration for ring 2 */
+#define FEC_R_DES_ACTIVE_1	0x1e0 /* Rx descriptor active for ring 1 */
+#define FEC_X_DES_ACTIVE_1	0x1e4 /* Tx descriptor active for ring 1 */
+#define FEC_R_DES_ACTIVE_2	0x1e8 /* Rx descriptor active for ring 2 */
+#define FEC_X_DES_ACTIVE_2	0x1ec /* Tx descriptor active for ring 2 */
+#define FEC_QOS_SCHEME		0x1f0 /* Set multi queues Qos scheme */
+#define FEC_MIIGSK_CFGR		0x300 /* MIIGSK Configuration reg */
+#define FEC_MIIGSK_ENR		0x308 /* MIIGSK Enable reg */
+
+#define BM_MIIGSK_CFGR_MII		0x00
+#define BM_MIIGSK_CFGR_RMII		0x01
+#define BM_MIIGSK_CFGR_FRCONT_10M	0x40
+
+#define RMON_T_DROP		0x200 /* Count of frames not cntd correctly */
+#define RMON_T_PACKETS		0x204 /* RMON TX packet count */
+#define RMON_T_BC_PKT		0x208 /* RMON TX broadcast pkts */
+#define RMON_T_MC_PKT		0x20c /* RMON TX multicast pkts */
+#define RMON_T_CRC_ALIGN	0x210 /* RMON TX pkts with CRC align err */
+#define RMON_T_UNDERSIZE	0x214 /* RMON TX pkts < 64 bytes, good CRC */
+#define RMON_T_OVERSIZE		0x218 /* RMON TX pkts > MAX_FL bytes good CRC */
+#define RMON_T_FRAG		0x21c /* RMON TX pkts < 64 bytes, bad CRC */
+#define RMON_T_JAB		0x220 /* RMON TX pkts > MAX_FL bytes, bad CRC */
+#define RMON_T_COL		0x224 /* RMON TX collision count */
+#define RMON_T_P64		0x228 /* RMON TX 64 byte pkts */
+#define RMON_T_P65TO127		0x22c /* RMON TX 65 to 127 byte pkts */
+#define RMON_T_P128TO255	0x230 /* RMON TX 128 to 255 byte pkts */
+#define RMON_T_P256TO511	0x234 /* RMON TX 256 to 511 byte pkts */
+#define RMON_T_P512TO1023	0x238 /* RMON TX 512 to 1023 byte pkts */
+#define RMON_T_P1024TO2047	0x23c /* RMON TX 1024 to 2047 byte pkts */
+#define RMON_T_P_GTE2048	0x240 /* RMON TX pkts > 2048 bytes */
+#define RMON_T_OCTETS		0x244 /* RMON TX octets */
+#define IEEE_T_DROP		0x248 /* Count of frames not counted crtly */
+#define IEEE_T_FRAME_OK		0x24c /* Frames tx'd OK */
+#define IEEE_T_1COL		0x250 /* Frames tx'd with single collision */
+#define IEEE_T_MCOL		0x254 /* Frames tx'd with multiple collision */
+#define IEEE_T_DEF		0x258 /* Frames tx'd after deferral delay */
+#define IEEE_T_LCOL		0x25c /* Frames tx'd with late collision */
+#define IEEE_T_EXCOL		0x260 /* Frames tx'd with excesv collisions */
+#define IEEE_T_MACERR		0x264 /* Frames tx'd with TX FIFO underrun */
+#define IEEE_T_CSERR		0x268 /* Frames tx'd with carrier sense err */
+#define IEEE_T_SQE		0x26c /* Frames tx'd with SQE err */
+#define IEEE_T_FDXFC		0x270 /* Flow control pause frames tx'd */
+#define IEEE_T_OCTETS_OK	0x274 /* Octet count for frames tx'd w/o err */
+#define RMON_R_PACKETS		0x284 /* RMON RX packet count */
+#define RMON_R_BC_PKT		0x288 /* RMON RX broadcast pkts */
+#define RMON_R_MC_PKT		0x28c /* RMON RX multicast pkts */
+#define RMON_R_CRC_ALIGN	0x290 /* RMON RX pkts with CRC alignment err */
+#define RMON_R_UNDERSIZE	0x294 /* RMON RX pkts < 64 bytes, good CRC */
+#define RMON_R_OVERSIZE		0x298 /* RMON RX pkts > MAX_FL bytes good CRC */
+#define RMON_R_FRAG		0x29c /* RMON RX pkts < 64 bytes, bad CRC */
+#define RMON_R_JAB		0x2a0 /* RMON RX pkts > MAX_FL bytes, bad CRC */
+#define RMON_R_RESVD_O		0x2a4 /* Reserved */
+#define RMON_R_P64		0x2a8 /* RMON RX 64 byte pkts */
+#define RMON_R_P65TO127		0x2ac /* RMON RX 65 to 127 byte pkts */
+#define RMON_R_P128TO255	0x2b0 /* RMON RX 128 to 255 byte pkts */
+#define RMON_R_P256TO511	0x2b4 /* RMON RX 256 to 511 byte pkts */
+#define RMON_R_P512TO1023	0x2b8 /* RMON RX 512 to 1023 byte pkts */
+#define RMON_R_P1024TO2047	0x2bc /* RMON RX 1024 to 2047 byte pkts */
+#define RMON_R_P_GTE2048	0x2c0 /* RMON RX pkts > 2048 bytes */
+#define RMON_R_OCTETS		0x2c4 /* RMON RX octets */
+#define IEEE_R_DROP		0x2c8 /* Count frames not counted correctly */
+#define IEEE_R_FRAME_OK		0x2cc /* Frames rx'd OK */
+#define IEEE_R_CRC		0x2d0 /* Frames rx'd with CRC err */
+#define IEEE_R_ALIGN		0x2d4 /* Frames rx'd with alignment err */
+#define IEEE_R_MACERR		0x2d8 /* Receive FIFO overflow count */
+#define IEEE_R_FDXFC		0x2dc /* Flow control pause frames rx'd */
+#define IEEE_R_OCTETS_OK	0x2e0 /* Octet cnt for frames rx'd w/o err */
+
+#else
+
+#define FEC_ECNTRL		0x000 /* Ethernet control reg */
+#define FEC_IEVENT		0x004 /* Interrupt even reg */
+#define FEC_IMASK		0x008 /* Interrupt mask reg */
+#define FEC_IVEC		0x00c /* Interrupt vec status reg */
+#define FEC_R_DES_ACTIVE_0	0x010 /* Receive descriptor reg */
+#define FEC_R_DES_ACTIVE_1	FEC_R_DES_ACTIVE_0
+#define FEC_R_DES_ACTIVE_2	FEC_R_DES_ACTIVE_0
+#define FEC_X_DES_ACTIVE_0	0x014 /* Transmit descriptor reg */
+#define FEC_X_DES_ACTIVE_1	FEC_X_DES_ACTIVE_0
+#define FEC_X_DES_ACTIVE_2	FEC_X_DES_ACTIVE_0
+#define FEC_MII_DATA		0x040 /* MII manage frame reg */
+#define FEC_MII_SPEED		0x044 /* MII speed control reg */
+#define FEC_R_BOUND		0x08c /* FIFO receive bound reg */
+#define FEC_R_FSTART		0x090 /* FIFO receive start reg */
+#define FEC_X_WMRK		0x0a4 /* FIFO transmit water mark */
+#define FEC_X_FSTART		0x0ac /* FIFO transmit start reg */
+#define FEC_R_CNTRL		0x104 /* Receive control reg */
+#define FEC_MAX_FRM_LEN		0x108 /* Maximum frame length reg */
+#define FEC_X_CNTRL		0x144 /* Transmit Control reg */
+#define FEC_ADDR_LOW		0x3c0 /* Low 32bits MAC address */
+#define FEC_ADDR_HIGH		0x3c4 /* High 16bits MAC address */
+#define FEC_GRP_HASH_TABLE_HIGH	0x3c8 /* High 32bits hash table */
+#define FEC_GRP_HASH_TABLE_LOW	0x3cc /* Low 32bits hash table */
+#define FEC_R_DES_START_0	0x3d0 /* Receive descriptor ring */
+#define FEC_R_DES_START_1	FEC_R_DES_START_0
+#define FEC_R_DES_START_2	FEC_R_DES_START_0
+#define FEC_X_DES_START_0	0x3d4 /* Transmit descriptor ring */
+#define FEC_X_DES_START_1	FEC_X_DES_START_0
+#define FEC_X_DES_START_2	FEC_X_DES_START_0
+#define FEC_R_BUFF_SIZE_0	0x3d8 /* Maximum receive buff size */
+#define FEC_R_BUFF_SIZE_1	FEC_R_BUFF_SIZE_0
+#define FEC_R_BUFF_SIZE_2	FEC_R_BUFF_SIZE_0
+#define FEC_FIFO_RAM		0x400 /* FIFO RAM buffer */
+/* Not existed in real chip
+ * Just for pass build.
+ */
+#define FEC_RCMR_1		0xfff
+#define FEC_RCMR_2		0xfff
+#define FEC_DMA_CFG_1		0xfff
+#define FEC_DMA_CFG_2		0xfff
+#define FEC_TXIC0		0xfff
+#define FEC_TXIC1		0xfff
+#define FEC_TXIC2		0xfff
+#define FEC_RXIC0		0xfff
+#define FEC_RXIC1		0xfff
+#define FEC_RXIC2		0xfff
+#endif /* CONFIG_M5272 */
+
+
+/*
+ *	Define the buffer descriptor structure.
+ */
+#if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
+struct bufdesc {
+	unsigned short cbd_datlen;	/* Data length */
+	unsigned short cbd_sc;	/* Control and status info */
+	unsigned long cbd_bufaddr;	/* Buffer address */
+};
+#else
+struct bufdesc {
+	unsigned short	cbd_sc;			/* Control and status info */
+	unsigned short	cbd_datlen;		/* Data length */
+	unsigned long	cbd_bufaddr;		/* Buffer address */
+};
+#endif
+
+struct bufdesc_ex {
+	struct bufdesc desc;
+	unsigned long cbd_esc;
+	unsigned long cbd_prot;
+	unsigned long cbd_bdu;
+	unsigned long ts;
+	unsigned short res0[4];
+};
+
+/*
+ *	The following definitions courtesy of commproc.h, which where
+ *	Copyright (c) 1997 Dan Malek (dmalek@jlc.net).
+ */
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Receive is empty */
+#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
+#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor */
+#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
+#define BD_SC_CM	((ushort)0x0200)	/* Continuous mode */
+#define BD_SC_ID	((ushort)0x0100)	/* Rec'd too many idles */
+#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
+#define BD_SC_BR	((ushort)0x0020)	/* Break received */
+#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
+#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
+#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
+#define BD_SC_CD	((ushort)0x0001)	/* ?? */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ */
+#define BD_ENET_RX_EMPTY	((ushort)0x8000)
+#define BD_ENET_RX_WRAP		((ushort)0x2000)
+#define BD_ENET_RX_INTR		((ushort)0x1000)
+#define BD_ENET_RX_LAST		((ushort)0x0800)
+#define BD_ENET_RX_FIRST	((ushort)0x0400)
+#define BD_ENET_RX_MISS		((ushort)0x0100)
+#define BD_ENET_RX_LG		((ushort)0x0020)
+#define BD_ENET_RX_NO		((ushort)0x0010)
+#define BD_ENET_RX_SH		((ushort)0x0008)
+#define BD_ENET_RX_CR		((ushort)0x0004)
+#define BD_ENET_RX_OV		((ushort)0x0002)
+#define BD_ENET_RX_CL		((ushort)0x0001)
+#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
+
+/* Enhanced buffer descriptor control/status used by Ethernet receive */
+#define BD_ENET_RX_VLAN		0x00000004
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ */
+#define BD_ENET_TX_READY	((ushort)0x8000)
+#define BD_ENET_TX_PAD		((ushort)0x4000)
+#define BD_ENET_TX_WRAP		((ushort)0x2000)
+#define BD_ENET_TX_INTR		((ushort)0x1000)
+#define BD_ENET_TX_LAST		((ushort)0x0800)
+#define BD_ENET_TX_TC		((ushort)0x0400)
+#define BD_ENET_TX_DEF		((ushort)0x0200)
+#define BD_ENET_TX_HB		((ushort)0x0100)
+#define BD_ENET_TX_LC		((ushort)0x0080)
+#define BD_ENET_TX_RL		((ushort)0x0040)
+#define BD_ENET_TX_RCMASK	((ushort)0x003c)
+#define BD_ENET_TX_UN		((ushort)0x0002)
+#define BD_ENET_TX_CSL		((ushort)0x0001)
+#define BD_ENET_TX_STATS	((ushort)0x0fff)	/* All status bits */
+
+/* enhanced buffer descriptor control/status used by Ethernet transmit */
+#define BD_ENET_TX_INT		0x40000000
+#define BD_ENET_TX_TS		0x20000000
+#define BD_ENET_TX_PINS		0x10000000
+#define BD_ENET_TX_IINS		0x08000000
+
+
+/* This device has up to three irqs on some platforms */
+#define FEC_IRQ_NUM		3
+
+/* Maximum number of queues supported
+ * ENET with AVB IP can support up to 3 independent tx queues and rx queues.
+ * User can point the queue number that is less than or equal to 3.
+ */
+#define FEC_ENET_MAX_TX_QS	3
+#define FEC_ENET_MAX_RX_QS	3
+
+#define FEC_R_DES_START(X)	(((X) == 1) ? FEC_R_DES_START_1 : \
+				(((X) == 2) ? \
+					FEC_R_DES_START_2 : FEC_R_DES_START_0))
+#define FEC_X_DES_START(X)	(((X) == 1) ? FEC_X_DES_START_1 : \
+				(((X) == 2) ? \
+					FEC_X_DES_START_2 : FEC_X_DES_START_0))
+#define FEC_R_BUFF_SIZE(X)	(((X) == 1) ? FEC_R_BUFF_SIZE_1 : \
+				(((X) == 2) ? \
+					FEC_R_BUFF_SIZE_2 : FEC_R_BUFF_SIZE_0))
+#define FEC_R_DES_ACTIVE(X)	(((X) == 1) ? FEC_R_DES_ACTIVE_1 : \
+				(((X) == 2) ? \
+				   FEC_R_DES_ACTIVE_2 : FEC_R_DES_ACTIVE_0))
+#define FEC_X_DES_ACTIVE(X)	(((X) == 1) ? FEC_X_DES_ACTIVE_1 : \
+				(((X) == 2) ? \
+				   FEC_X_DES_ACTIVE_2 : FEC_X_DES_ACTIVE_0))
+
+#define FEC_DMA_CFG(X)		(((X) == 2) ? FEC_DMA_CFG_2 : FEC_DMA_CFG_1)
+
+#define DMA_CLASS_EN		(1 << 16)
+#define FEC_RCMR(X)		(((X) == 2) ? FEC_RCMR_2 : FEC_RCMR_1)
+#define IDLE_SLOPE_MASK		0xffff
+#define IDLE_SLOPE_1		0x200 /* BW fraction: 0.5 */
+#define IDLE_SLOPE_2		0x200 /* BW fraction: 0.5 */
+#define IDLE_SLOPE(X)		(((X) == 1) ?				\
+				(IDLE_SLOPE_1 & IDLE_SLOPE_MASK) :	\
+				(IDLE_SLOPE_2 & IDLE_SLOPE_MASK))
+#define RCMR_MATCHEN		(0x1 << 16)
+#define RCMR_CMP_CFG(v, n)	(((v) & 0x7) <<  (n << 2))
+#define RCMR_CMP_1		(RCMR_CMP_CFG(0, 0) | RCMR_CMP_CFG(1, 1) | \
+				RCMR_CMP_CFG(2, 2) | RCMR_CMP_CFG(3, 3))
+#define RCMR_CMP_2		(RCMR_CMP_CFG(4, 0) | RCMR_CMP_CFG(5, 1) | \
+				RCMR_CMP_CFG(6, 2) | RCMR_CMP_CFG(7, 3))
+#define RCMR_CMP(X)		(((X) == 1) ? RCMR_CMP_1 : RCMR_CMP_2)
+#define FEC_TX_BD_FTYPE(X)	(((X) & 0xf) << 20)
+
+/* The number of Tx and Rx buffers.  These are allocated from the page
+ * pool.  The code may assume these are power of two, so it it best
+ * to keep them that size.
+ * We don't need to allocate pages for the transmitter.  We just use
+ * the skbuffer directly.
+ */
+
+#define FEC_ENET_RX_PAGES	256
+#define FEC_ENET_RX_FRSIZE	2048
+#define FEC_ENET_RX_FRPPG	(PAGE_SIZE / FEC_ENET_RX_FRSIZE)
+#define RX_RING_SIZE		(FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
+#define FEC_ENET_TX_FRSIZE	2048
+#define FEC_ENET_TX_FRPPG	(PAGE_SIZE / FEC_ENET_TX_FRSIZE)
+#define TX_RING_SIZE		512	/* Must be power of two */
+#define TX_RING_MOD_MASK	511	/*   for this to work */
+
+#define BD_ENET_RX_INT		0x00800000
+#define BD_ENET_RX_PTP		((ushort)0x0400)
+#define BD_ENET_RX_ICE		0x00000020
+#define BD_ENET_RX_PCR		0x00000010
+#define FLAG_RX_CSUM_ENABLED	(BD_ENET_RX_ICE | BD_ENET_RX_PCR)
+#define FLAG_RX_CSUM_ERROR	(BD_ENET_RX_ICE | BD_ENET_RX_PCR)
+
+/* Interrupt events/masks. */
+#define FEC_ENET_HBERR  ((uint)0x80000000)      /* Heartbeat error */
+#define FEC_ENET_BABR   ((uint)0x40000000)      /* Babbling receiver */
+#define FEC_ENET_BABT   ((uint)0x20000000)      /* Babbling transmitter */
+#define FEC_ENET_GRA    ((uint)0x10000000)      /* Graceful stop complete */
+#define FEC_ENET_TXF_0	((uint)0x08000000)	/* Full frame transmitted */
+#define FEC_ENET_TXF_1	((uint)0x00000008)	/* Full frame transmitted */
+#define FEC_ENET_TXF_2	((uint)0x00000080)	/* Full frame transmitted */
+#define FEC_ENET_TXB    ((uint)0x04000000)      /* A buffer was transmitted */
+#define FEC_ENET_RXF_0	((uint)0x02000000)	/* Full frame received */
+#define FEC_ENET_RXF_1	((uint)0x00000002)	/* Full frame received */
+#define FEC_ENET_RXF_2	((uint)0x00000020)	/* Full frame received */
+#define FEC_ENET_RXB    ((uint)0x01000000)      /* A buffer was received */
+#define FEC_ENET_MII    ((uint)0x00800000)      /* MII interrupt */
+#define FEC_ENET_EBERR  ((uint)0x00400000)      /* SDMA bus error */
+#define FEC_ENET_WAKEUP	((uint)0x00020000)	/* Wakeup request */
+#define FEC_ENET_TXF	(FEC_ENET_TXF_0 | FEC_ENET_TXF_1 | FEC_ENET_TXF_2)
+#define FEC_ENET_RXF	(FEC_ENET_RXF_0 | FEC_ENET_RXF_1 | FEC_ENET_RXF_2)
+#define FEC_ENET_TS_AVAIL       ((uint)0x00010000)
+#define FEC_ENET_TS_TIMER       ((uint)0x00008000)
+
+#define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII | FEC_ENET_TS_TIMER)
+#define FEC_RX_DISABLED_IMASK (FEC_DEFAULT_IMASK & (~FEC_ENET_RXF))
+
+/* ENET interrupt coalescing macro define */
+#define FEC_ITR_CLK_SEL		(0x1 << 30)
+#define FEC_ITR_EN		(0x1 << 31)
+#define FEC_ITR_ICFT(X)		(((X) & 0xff) << 20)
+#define FEC_ITR_ICTT(X)		((X) & 0xffff)
+#define FEC_ITR_ICFT_DEFAULT	200  /* Set 200 frame count threshold */
+#define FEC_ITR_ICTT_DEFAULT	1000 /* Set 1000us timer threshold */
+
+#define FEC_VLAN_TAG_LEN	0x04
+#define FEC_ETHTYPE_LEN		0x02
+
+/* Controller is ENET-MAC */
+#define FEC_QUIRK_ENET_MAC		(1 << 0)
+/* Controller needs driver to swap frame */
+#define FEC_QUIRK_SWAP_FRAME		(1 << 1)
+/* Controller uses gasket */
+#define FEC_QUIRK_USE_GASKET		(1 << 2)
+/* Controller has GBIT support */
+#define FEC_QUIRK_HAS_GBIT		(1 << 3)
+/* Controller has extend desc buffer */
+#define FEC_QUIRK_HAS_BUFDESC_EX	(1 << 4)
+/* Controller has hardware checksum support */
+#define FEC_QUIRK_HAS_CSUM		(1 << 5)
+/* Controller has hardware vlan support */
+#define FEC_QUIRK_HAS_VLAN		(1 << 6)
+/* ENET IP errata ERR006358
+ *
+ * If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously
+ * detected as not set during a prior frame transmission, then the
+ * ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs
+ * were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in
+ * frames not being transmitted until there is a 0-to-1 transition on
+ * ENET_TDAR[TDAR].
+ */
+#define FEC_QUIRK_ERR006358		(1 << 7)
+/* ENET IP hw AVB
+ *
+ * i.MX6SX ENET IP add Audio Video Bridging (AVB) feature support.
+ * - Two class indicators on receive with configurable priority
+ * - Two class indicators and line speed timer on transmit allowing
+ *   implementation class credit based shapers externally
+ * - Additional DMA registers provisioned to allow managing up to 3
+ *   independent rings
+ */
+#define FEC_QUIRK_HAS_AVB		(1 << 8)
+/* There is a TDAR race condition for mutliQ when the software sets TDAR
+ * and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
+ * This will cause the udma_tx and udma_tx_arbiter state machines to hang.
+ * The issue exist at i.MX6SX enet IP.
+ */
+#define FEC_QUIRK_ERR007885		(1 << 9)
+/* ENET Block Guide/ Chapter for the iMX6SX (PELE) address one issue:
+ * After set ENET_ATCR[Capture], there need some time cycles before the counter
+ * value is capture in the register clock domain.
+ * The wait-time-cycles is at least 6 clock cycles of the slower clock between
+ * the register clock and the 1588 clock. The 1588 ts_clk is fixed to 25Mhz,
+ * register clock is 66Mhz, so the wait-time-cycles must be greater than 240ns
+ * (40ns * 6).
+ */
+#define FEC_QUIRK_BUG_CAPTURE		(1 << 10)
+/* Controller has only one MDIO bus */
+#define FEC_QUIRK_SINGLE_MDIO		(1 << 11)
+
+struct fec_enet_priv_tx_q {
+	int index;
+	unsigned char *tx_bounce[TX_RING_SIZE];
+	struct  sk_buff *tx_skbuff[TX_RING_SIZE];
+
+	dma_addr_t	bd_dma;
+	struct bufdesc	*tx_bd_base;
+	uint tx_ring_size;
+
+	unsigned short tx_stop_threshold;
+	unsigned short tx_wake_threshold;
+
+	struct bufdesc	*cur_tx;
+	struct bufdesc	*dirty_tx;
+	char *tso_hdrs;
+	dma_addr_t tso_hdrs_dma;
+};
+
+struct fec_enet_priv_rx_q {
+	int index;
+	struct  sk_buff *rx_skbuff[RX_RING_SIZE];
+
+	dma_addr_t	bd_dma;
+	struct bufdesc	*rx_bd_base;
+	uint rx_ring_size;
+
+	struct bufdesc	*cur_rx;
+};
+
+/* The FEC buffer descriptors track the ring buffers.  The rx_bd_base and
+ * tx_bd_base always point to the base of the buffer descriptors.  The
+ * cur_rx and cur_tx point to the currently available buffer.
+ * The dirty_tx tracks the current buffer that is being sent by the
+ * controller.  The cur_tx and dirty_tx are equal under both completely
+ * empty and completely full conditions.  The empty/ready indicator in
+ * the buffer descriptor determines the actual condition.
+ */
+struct fec_enet_private {
+	/* Hardware registers of the FEC device */
+	void __iomem *hwp;
+
+	struct net_device *netdev;
+
+	struct clk *clk_ipg;
+	struct clk *clk_ahb;
+	struct clk *clk_ref;
+	struct clk *clk_enet_out;
+	struct clk *clk_ptp;
+
+	bool ptp_clk_on;
+	struct mutex ptp_clk_mutex;
+	unsigned int num_tx_queues;
+	unsigned int num_rx_queues;
+
+	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
+	struct fec_enet_priv_tx_q *tx_queue[FEC_ENET_MAX_TX_QS];
+	struct fec_enet_priv_rx_q *rx_queue[FEC_ENET_MAX_RX_QS];
+
+	unsigned int total_tx_ring_size;
+	unsigned int total_rx_ring_size;
+
+	unsigned long work_tx;
+	unsigned long work_rx;
+	unsigned long work_ts;
+	unsigned long work_mdio;
+
+	unsigned short bufdesc_size;
+
+	struct	platform_device *pdev;
+
+	int	dev_id;
+
+	/* Phylib and MDIO interface */
+	struct	mii_bus *mii_bus;
+	struct	phy_device *phy_dev;
+	int	mii_timeout;
+	uint	phy_speed;
+	phy_interface_t	phy_interface;
+	struct device_node *phy_node;
+	int	link;
+	int	full_duplex;
+	int	speed;
+	struct	completion mdio_done;
+	int	irq[FEC_IRQ_NUM];
+	bool	bufdesc_ex;
+	int	pause_flag;
+	int	wol_flag;
+	u32	quirks;
+
+	struct	napi_struct napi;
+	int	csum_flags;
+
+	struct work_struct tx_timeout_work;
+
+	struct ptp_clock *ptp_clock;
+	struct ptp_clock_info ptp_caps;
+	unsigned long last_overflow_check;
+	spinlock_t tmreg_lock;
+	struct cyclecounter cc;
+	struct timecounter tc;
+	int rx_hwtstamp_filter;
+	u32 base_incval;
+	u32 cycle_speed;
+	int hwts_rx_en;
+	int hwts_tx_en;
+	struct delayed_work time_keep;
+	struct regulator *reg_phy;
+
+	unsigned int tx_align;
+	unsigned int rx_align;
+
+	/* hw interrupt coalesce */
+	unsigned int rx_pkts_itr;
+	unsigned int rx_time_itr;
+	unsigned int tx_pkts_itr;
+	unsigned int tx_time_itr;
+	unsigned int itr_clk_rate;
+
+	u32 rx_copybreak;
+
+	/* ptp clock period in ns*/
+	unsigned int ptp_inc;
+
+	/* pps  */
+	int pps_channel;
+	unsigned int reload_period;
+	int pps_enable;
+	unsigned int next_counter;
+};
+
+void fec_ptp_init(struct platform_device *pdev);
+void fec_ptp_start_cyclecounter(struct net_device *ndev);
+int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr);
+int fec_ptp_get(struct net_device *ndev, struct ifreq *ifr);
+uint fec_ptp_check_pps_event(struct fec_enet_private *fep);
+
+/****************************************************************************/
+#endif /* FEC_H */