Initial import

23 files changed, 28975 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
new file mode 100644
index 000000000..08f22f348
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -0,0 +1,1418 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* 80003ES2LAN Gigabit Ethernet Controller (Copper)
+ * 80003ES2LAN Gigabit Ethernet Controller (Serdes)
+ */
+
+#include "e1000.h"
+
+/* A table for the GG82563 cable length where the range is defined
+ * with a lower bound at "index" and the upper bound at
+ * "index + 5".
+ */
+static const u16 e1000_gg82563_cable_length_table[] = {
+	0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF
+};
+
+#define GG82563_CABLE_LENGTH_TABLE_SIZE \
+		ARRAY_SIZE(e1000_gg82563_cable_length_table)
+
+static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
+static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
+static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw);
+static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex);
+static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
+					   u16 *data);
+static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
+					    u16 data);
+static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw);
+
+/**
+ *  e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+
+	if (hw->phy.media_type != e1000_media_type_copper) {
+		phy->type = e1000_phy_none;
+		return 0;
+	} else {
+		phy->ops.power_up = e1000_power_up_phy_copper;
+		phy->ops.power_down = e1000_power_down_phy_copper_80003es2lan;
+	}
+
+	phy->addr = 1;
+	phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+	phy->reset_delay_us = 100;
+	phy->type = e1000_phy_gg82563;
+
+	/* This can only be done after all function pointers are setup. */
+	ret_val = e1000e_get_phy_id(hw);
+
+	/* Verify phy id */
+	if (phy->id != GG82563_E_PHY_ID)
+		return -E1000_ERR_PHY;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_init_nvm_params_80003es2lan - Init ESB2 NVM func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = er32(EECD);
+	u16 size;
+
+	nvm->opcode_bits = 8;
+	nvm->delay_usec = 1;
+	switch (nvm->override) {
+	case e1000_nvm_override_spi_large:
+		nvm->page_size = 32;
+		nvm->address_bits = 16;
+		break;
+	case e1000_nvm_override_spi_small:
+		nvm->page_size = 8;
+		nvm->address_bits = 8;
+		break;
+	default:
+		nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+		nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
+		break;
+	}
+
+	nvm->type = e1000_nvm_eeprom_spi;
+
+	size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+		     E1000_EECD_SIZE_EX_SHIFT);
+
+	/* Added to a constant, "size" becomes the left-shift value
+	 * for setting word_size.
+	 */
+	size += NVM_WORD_SIZE_BASE_SHIFT;
+
+	/* EEPROM access above 16k is unsupported */
+	if (size > 14)
+		size = 14;
+	nvm->word_size = 1 << size;
+
+	return 0;
+}
+
+/**
+ *  e1000_init_mac_params_80003es2lan - Init ESB2 MAC func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_mac_params_80003es2lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+
+	/* Set media type and media-dependent function pointers */
+	switch (hw->adapter->pdev->device) {
+	case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
+		hw->phy.media_type = e1000_media_type_internal_serdes;
+		mac->ops.check_for_link = e1000e_check_for_serdes_link;
+		mac->ops.setup_physical_interface =
+		    e1000e_setup_fiber_serdes_link;
+		break;
+	default:
+		hw->phy.media_type = e1000_media_type_copper;
+		mac->ops.check_for_link = e1000e_check_for_copper_link;
+		mac->ops.setup_physical_interface =
+		    e1000_setup_copper_link_80003es2lan;
+		break;
+	}
+
+	/* Set mta register count */
+	mac->mta_reg_count = 128;
+	/* Set rar entry count */
+	mac->rar_entry_count = E1000_RAR_ENTRIES;
+	/* FWSM register */
+	mac->has_fwsm = true;
+	/* ARC supported; valid only if manageability features are enabled. */
+	mac->arc_subsystem_valid = !!(er32(FWSM) & E1000_FWSM_MODE_MASK);
+	/* Adaptive IFS not supported */
+	mac->adaptive_ifs = false;
+
+	/* set lan id for port to determine which phy lock to use */
+	hw->mac.ops.set_lan_id(hw);
+
+	return 0;
+}
+
+static s32 e1000_get_variants_80003es2lan(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	s32 rc;
+
+	rc = e1000_init_mac_params_80003es2lan(hw);
+	if (rc)
+		return rc;
+
+	rc = e1000_init_nvm_params_80003es2lan(hw);
+	if (rc)
+		return rc;
+
+	rc = e1000_init_phy_params_80003es2lan(hw);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+/**
+ *  e1000_acquire_phy_80003es2lan - Acquire rights to access PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  A wrapper to acquire access rights to the correct PHY.
+ **/
+static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
+{
+	u16 mask;
+
+	mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+	return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
+}
+
+/**
+ *  e1000_release_phy_80003es2lan - Release rights to access PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  A wrapper to release access rights to the correct PHY.
+ **/
+static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
+{
+	u16 mask;
+
+	mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+	e1000_release_swfw_sync_80003es2lan(hw, mask);
+}
+
+/**
+ *  e1000_acquire_mac_csr_80003es2lan - Acquire right to access Kumeran register
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the semaphore to access the Kumeran interface.
+ *
+ **/
+static s32 e1000_acquire_mac_csr_80003es2lan(struct e1000_hw *hw)
+{
+	u16 mask;
+
+	mask = E1000_SWFW_CSR_SM;
+
+	return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
+}
+
+/**
+ *  e1000_release_mac_csr_80003es2lan - Release right to access Kumeran Register
+ *  @hw: pointer to the HW structure
+ *
+ *  Release the semaphore used to access the Kumeran interface
+ **/
+static void e1000_release_mac_csr_80003es2lan(struct e1000_hw *hw)
+{
+	u16 mask;
+
+	mask = E1000_SWFW_CSR_SM;
+
+	e1000_release_swfw_sync_80003es2lan(hw, mask);
+}
+
+/**
+ *  e1000_acquire_nvm_80003es2lan - Acquire rights to access NVM
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the semaphore to access the EEPROM.
+ **/
+static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	ret_val = e1000_acquire_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000e_acquire_nvm(hw);
+
+	if (ret_val)
+		e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_release_nvm_80003es2lan - Relinquish rights to access NVM
+ *  @hw: pointer to the HW structure
+ *
+ *  Release the semaphore used to access the EEPROM.
+ **/
+static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw)
+{
+	e1000e_release_nvm(hw);
+	e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ *  e1000_acquire_swfw_sync_80003es2lan - Acquire SW/FW semaphore
+ *  @hw: pointer to the HW structure
+ *  @mask: specifies which semaphore to acquire
+ *
+ *  Acquire the SW/FW semaphore to access the PHY or NVM.  The mask
+ *  will also specify which port we're acquiring the lock for.
+ **/
+static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+	u32 swmask = mask;
+	u32 fwmask = mask << 16;
+	s32 i = 0;
+	s32 timeout = 50;
+
+	while (i < timeout) {
+		if (e1000e_get_hw_semaphore(hw))
+			return -E1000_ERR_SWFW_SYNC;
+
+		swfw_sync = er32(SW_FW_SYNC);
+		if (!(swfw_sync & (fwmask | swmask)))
+			break;
+
+		/* Firmware currently using resource (fwmask)
+		 * or other software thread using resource (swmask)
+		 */
+		e1000e_put_hw_semaphore(hw);
+		mdelay(5);
+		i++;
+	}
+
+	if (i == timeout) {
+		e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
+		return -E1000_ERR_SWFW_SYNC;
+	}
+
+	swfw_sync |= swmask;
+	ew32(SW_FW_SYNC, swfw_sync);
+
+	e1000e_put_hw_semaphore(hw);
+
+	return 0;
+}
+
+/**
+ *  e1000_release_swfw_sync_80003es2lan - Release SW/FW semaphore
+ *  @hw: pointer to the HW structure
+ *  @mask: specifies which semaphore to acquire
+ *
+ *  Release the SW/FW semaphore used to access the PHY or NVM.  The mask
+ *  will also specify which port we're releasing the lock for.
+ **/
+static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+
+	while (e1000e_get_hw_semaphore(hw) != 0)
+		; /* Empty */
+
+	swfw_sync = er32(SW_FW_SYNC);
+	swfw_sync &= ~mask;
+	ew32(SW_FW_SYNC, swfw_sync);
+
+	e1000e_put_hw_semaphore(hw);
+}
+
+/**
+ *  e1000_read_phy_reg_gg82563_80003es2lan - Read GG82563 PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of the register to read
+ *  @data: pointer to the data returned from the operation
+ *
+ *  Read the GG82563 PHY register.
+ **/
+static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
+						  u32 offset, u16 *data)
+{
+	s32 ret_val;
+	u32 page_select;
+	u16 temp;
+
+	ret_val = e1000_acquire_phy_80003es2lan(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Select Configuration Page */
+	if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
+		page_select = GG82563_PHY_PAGE_SELECT;
+	} else {
+		/* Use Alternative Page Select register to access
+		 * registers 30 and 31
+		 */
+		page_select = GG82563_PHY_PAGE_SELECT_ALT;
+	}
+
+	temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
+	ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
+	if (ret_val) {
+		e1000_release_phy_80003es2lan(hw);
+		return ret_val;
+	}
+
+	if (hw->dev_spec.e80003es2lan.mdic_wa_enable) {
+		/* The "ready" bit in the MDIC register may be incorrectly set
+		 * before the device has completed the "Page Select" MDI
+		 * transaction.  So we wait 200us after each MDI command...
+		 */
+		usleep_range(200, 400);
+
+		/* ...and verify the command was successful. */
+		ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
+
+		if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
+			e1000_release_phy_80003es2lan(hw);
+			return -E1000_ERR_PHY;
+		}
+
+		usleep_range(200, 400);
+
+		ret_val = e1000e_read_phy_reg_mdic(hw,
+						   MAX_PHY_REG_ADDRESS & offset,
+						   data);
+
+		usleep_range(200, 400);
+	} else {
+		ret_val = e1000e_read_phy_reg_mdic(hw,
+						   MAX_PHY_REG_ADDRESS & offset,
+						   data);
+	}
+
+	e1000_release_phy_80003es2lan(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_phy_reg_gg82563_80003es2lan - Write GG82563 PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of the register to read
+ *  @data: value to write to the register
+ *
+ *  Write to the GG82563 PHY register.
+ **/
+static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
+						   u32 offset, u16 data)
+{
+	s32 ret_val;
+	u32 page_select;
+	u16 temp;
+
+	ret_val = e1000_acquire_phy_80003es2lan(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Select Configuration Page */
+	if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
+		page_select = GG82563_PHY_PAGE_SELECT;
+	} else {
+		/* Use Alternative Page Select register to access
+		 * registers 30 and 31
+		 */
+		page_select = GG82563_PHY_PAGE_SELECT_ALT;
+	}
+
+	temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
+	ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
+	if (ret_val) {
+		e1000_release_phy_80003es2lan(hw);
+		return ret_val;
+	}
+
+	if (hw->dev_spec.e80003es2lan.mdic_wa_enable) {
+		/* The "ready" bit in the MDIC register may be incorrectly set
+		 * before the device has completed the "Page Select" MDI
+		 * transaction.  So we wait 200us after each MDI command...
+		 */
+		usleep_range(200, 400);
+
+		/* ...and verify the command was successful. */
+		ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
+
+		if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
+			e1000_release_phy_80003es2lan(hw);
+			return -E1000_ERR_PHY;
+		}
+
+		usleep_range(200, 400);
+
+		ret_val = e1000e_write_phy_reg_mdic(hw,
+						    MAX_PHY_REG_ADDRESS &
+						    offset, data);
+
+		usleep_range(200, 400);
+	} else {
+		ret_val = e1000e_write_phy_reg_mdic(hw,
+						    MAX_PHY_REG_ADDRESS &
+						    offset, data);
+	}
+
+	e1000_release_phy_80003es2lan(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_nvm_80003es2lan - Write to ESB2 NVM
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of the register to read
+ *  @words: number of words to write
+ *  @data: buffer of data to write to the NVM
+ *
+ *  Write "words" of data to the ESB2 NVM.
+ **/
+static s32 e1000_write_nvm_80003es2lan(struct e1000_hw *hw, u16 offset,
+				       u16 words, u16 *data)
+{
+	return e1000e_write_nvm_spi(hw, offset, words, data);
+}
+
+/**
+ *  e1000_get_cfg_done_80003es2lan - Wait for configuration to complete
+ *  @hw: pointer to the HW structure
+ *
+ *  Wait a specific amount of time for manageability processes to complete.
+ *  This is a function pointer entry point called by the phy module.
+ **/
+static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw)
+{
+	s32 timeout = PHY_CFG_TIMEOUT;
+	u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+	if (hw->bus.func == 1)
+		mask = E1000_NVM_CFG_DONE_PORT_1;
+
+	while (timeout) {
+		if (er32(EEMNGCTL) & mask)
+			break;
+		usleep_range(1000, 2000);
+		timeout--;
+	}
+	if (!timeout) {
+		e_dbg("MNG configuration cycle has not completed.\n");
+		return -E1000_ERR_RESET;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_phy_force_speed_duplex_80003es2lan - Force PHY speed and duplex
+ *  @hw: pointer to the HW structure
+ *
+ *  Force the speed and duplex settings onto the PHY.  This is a
+ *  function pointer entry point called by the phy module.
+ **/
+static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	/* Clear Auto-Crossover to force MDI manually.  M88E1000 requires MDI
+	 * forced whenever speed and duplex are forced.
+	 */
+	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_AUTO;
+	ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	e_dbg("GG82563 PSCR: %X\n", phy_data);
+
+	ret_val = e1e_rphy(hw, MII_BMCR, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	/* Reset the phy to commit changes. */
+	phy_data |= BMCR_RESET;
+
+	ret_val = e1e_wphy(hw, MII_BMCR, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	udelay(1);
+
+	if (hw->phy.autoneg_wait_to_complete) {
+		e_dbg("Waiting for forced speed/duplex link on GG82563 phy.\n");
+
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link) {
+			/* We didn't get link.
+			 * Reset the DSP and cross our fingers.
+			 */
+			ret_val = e1000e_phy_reset_dsp(hw);
+			if (ret_val)
+				return ret_val;
+		}
+
+		/* Try once more */
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
+		if (ret_val)
+			return ret_val;
+	}
+
+	ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Resetting the phy means we need to verify the TX_CLK corresponds
+	 * to the link speed.  10Mbps -> 2.5MHz, else 25MHz.
+	 */
+	phy_data &= ~GG82563_MSCR_TX_CLK_MASK;
+	if (hw->mac.forced_speed_duplex & E1000_ALL_10_SPEED)
+		phy_data |= GG82563_MSCR_TX_CLK_10MBPS_2_5;
+	else
+		phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25;
+
+	/* In addition, we must re-enable CRS on Tx for both half and full
+	 * duplex.
+	 */
+	phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
+	ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_cable_length_80003es2lan - Set approximate cable length
+ *  @hw: pointer to the HW structure
+ *
+ *  Find the approximate cable length as measured by the GG82563 PHY.
+ *  This is a function pointer entry point called by the phy module.
+ **/
+static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, index;
+
+	ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	index = phy_data & GG82563_DSPD_CABLE_LENGTH;
+
+	if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE - 5)
+		return -E1000_ERR_PHY;
+
+	phy->min_cable_length = e1000_gg82563_cable_length_table[index];
+	phy->max_cable_length = e1000_gg82563_cable_length_table[index + 5];
+
+	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+	return 0;
+}
+
+/**
+ *  e1000_get_link_up_info_80003es2lan - Report speed and duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: pointer to speed buffer
+ *  @duplex: pointer to duplex buffer
+ *
+ *  Retrieve the current speed and duplex configuration.
+ **/
+static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
+					      u16 *duplex)
+{
+	s32 ret_val;
+
+	if (hw->phy.media_type == e1000_media_type_copper) {
+		ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex);
+		hw->phy.ops.cfg_on_link_up(hw);
+	} else {
+		ret_val = e1000e_get_speed_and_duplex_fiber_serdes(hw,
+								   speed,
+								   duplex);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_reset_hw_80003es2lan - Reset the ESB2 controller
+ *  @hw: pointer to the HW structure
+ *
+ *  Perform a global reset to the ESB2 controller.
+ **/
+static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+	u16 kum_reg_data;
+
+	/* Prevent the PCI-E bus from sticking if there is no TLP connection
+	 * on the last TLP read/write transaction when MAC is reset.
+	 */
+	ret_val = e1000e_disable_pcie_master(hw);
+	if (ret_val)
+		e_dbg("PCI-E Master disable polling has failed.\n");
+
+	e_dbg("Masking off all interrupts\n");
+	ew32(IMC, 0xffffffff);
+
+	ew32(RCTL, 0);
+	ew32(TCTL, E1000_TCTL_PSP);
+	e1e_flush();
+
+	usleep_range(10000, 20000);
+
+	ctrl = er32(CTRL);
+
+	ret_val = e1000_acquire_phy_80003es2lan(hw);
+	if (ret_val)
+		return ret_val;
+
+	e_dbg("Issuing a global reset to MAC\n");
+	ew32(CTRL, ctrl | E1000_CTRL_RST);
+	e1000_release_phy_80003es2lan(hw);
+
+	/* Disable IBIST slave mode (far-end loopback) */
+	ret_val =
+	    e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+					    &kum_reg_data);
+	if (ret_val)
+		return ret_val;
+	kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE;
+	e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+					 kum_reg_data);
+
+	ret_val = e1000e_get_auto_rd_done(hw);
+	if (ret_val)
+		/* We don't want to continue accessing MAC registers. */
+		return ret_val;
+
+	/* Clear any pending interrupt events. */
+	ew32(IMC, 0xffffffff);
+	er32(ICR);
+
+	return e1000_check_alt_mac_addr_generic(hw);
+}
+
+/**
+ *  e1000_init_hw_80003es2lan - Initialize the ESB2 controller
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize the hw bits, LED, VFTA, MTA, link and hw counters.
+ **/
+static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 reg_data;
+	s32 ret_val;
+	u16 kum_reg_data;
+	u16 i;
+
+	e1000_initialize_hw_bits_80003es2lan(hw);
+
+	/* Initialize identification LED */
+	ret_val = mac->ops.id_led_init(hw);
+	/* An error is not fatal and we should not stop init due to this */
+	if (ret_val)
+		e_dbg("Error initializing identification LED\n");
+
+	/* Disabling VLAN filtering */
+	e_dbg("Initializing the IEEE VLAN\n");
+	mac->ops.clear_vfta(hw);
+
+	/* Setup the receive address. */
+	e1000e_init_rx_addrs(hw, mac->rar_entry_count);
+
+	/* Zero out the Multicast HASH table */
+	e_dbg("Zeroing the MTA\n");
+	for (i = 0; i < mac->mta_reg_count; i++)
+		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+	/* Setup link and flow control */
+	ret_val = mac->ops.setup_link(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Disable IBIST slave mode (far-end loopback) */
+	e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+					&kum_reg_data);
+	kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE;
+	e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+					 kum_reg_data);
+
+	/* Set the transmit descriptor write-back policy */
+	reg_data = er32(TXDCTL(0));
+	reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) |
+		    E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC);
+	ew32(TXDCTL(0), reg_data);
+
+	/* ...for both queues. */
+	reg_data = er32(TXDCTL(1));
+	reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) |
+		    E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC);
+	ew32(TXDCTL(1), reg_data);
+
+	/* Enable retransmit on late collisions */
+	reg_data = er32(TCTL);
+	reg_data |= E1000_TCTL_RTLC;
+	ew32(TCTL, reg_data);
+
+	/* Configure Gigabit Carry Extend Padding */
+	reg_data = er32(TCTL_EXT);
+	reg_data &= ~E1000_TCTL_EXT_GCEX_MASK;
+	reg_data |= DEFAULT_TCTL_EXT_GCEX_80003ES2LAN;
+	ew32(TCTL_EXT, reg_data);
+
+	/* Configure Transmit Inter-Packet Gap */
+	reg_data = er32(TIPG);
+	reg_data &= ~E1000_TIPG_IPGT_MASK;
+	reg_data |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
+	ew32(TIPG, reg_data);
+
+	reg_data = E1000_READ_REG_ARRAY(hw, E1000_FFLT, 0x0001);
+	reg_data &= ~0x00100000;
+	E1000_WRITE_REG_ARRAY(hw, E1000_FFLT, 0x0001, reg_data);
+
+	/* default to true to enable the MDIC W/A */
+	hw->dev_spec.e80003es2lan.mdic_wa_enable = true;
+
+	ret_val =
+	    e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_OFFSET >>
+					    E1000_KMRNCTRLSTA_OFFSET_SHIFT, &i);
+	if (!ret_val) {
+		if ((i & E1000_KMRNCTRLSTA_OPMODE_MASK) ==
+		    E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
+			hw->dev_spec.e80003es2lan.mdic_wa_enable = false;
+	}
+
+	/* Clear all of the statistics registers (clear on read).  It is
+	 * important that we do this after we have tried to establish link
+	 * because the symbol error count will increment wildly if there
+	 * is no link.
+	 */
+	e1000_clear_hw_cntrs_80003es2lan(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_initialize_hw_bits_80003es2lan - Init hw bits of ESB2
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes required hardware-dependent bits needed for normal operation.
+ **/
+static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw)
+{
+	u32 reg;
+
+	/* Transmit Descriptor Control 0 */
+	reg = er32(TXDCTL(0));
+	reg |= (1 << 22);
+	ew32(TXDCTL(0), reg);
+
+	/* Transmit Descriptor Control 1 */
+	reg = er32(TXDCTL(1));
+	reg |= (1 << 22);
+	ew32(TXDCTL(1), reg);
+
+	/* Transmit Arbitration Control 0 */
+	reg = er32(TARC(0));
+	reg &= ~(0xF << 27);	/* 30:27 */
+	if (hw->phy.media_type != e1000_media_type_copper)
+		reg &= ~(1 << 20);
+	ew32(TARC(0), reg);
+
+	/* Transmit Arbitration Control 1 */
+	reg = er32(TARC(1));
+	if (er32(TCTL) & E1000_TCTL_MULR)
+		reg &= ~(1 << 28);
+	else
+		reg |= (1 << 28);
+	ew32(TARC(1), reg);
+
+	/* Disable IPv6 extension header parsing because some malformed
+	 * IPv6 headers can hang the Rx.
+	 */
+	reg = er32(RFCTL);
+	reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
+	ew32(RFCTL, reg);
+}
+
+/**
+ *  e1000_copper_link_setup_gg82563_80003es2lan - Configure GG82563 Link
+ *  @hw: pointer to the HW structure
+ *
+ *  Setup some GG82563 PHY registers for obtaining link
+ **/
+static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u32 reg;
+	u16 data;
+
+	ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
+	/* Use 25MHz for both link down and 1000Base-T for Tx clock. */
+	data |= GG82563_MSCR_TX_CLK_1000MBPS_25;
+
+	ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, data);
+	if (ret_val)
+		return ret_val;
+
+	/* Options:
+	 *   MDI/MDI-X = 0 (default)
+	 *   0 - Auto for all speeds
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+	 */
+	ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK;
+
+	switch (phy->mdix) {
+	case 1:
+		data |= GG82563_PSCR_CROSSOVER_MODE_MDI;
+		break;
+	case 2:
+		data |= GG82563_PSCR_CROSSOVER_MODE_MDIX;
+		break;
+	case 0:
+	default:
+		data |= GG82563_PSCR_CROSSOVER_MODE_AUTO;
+		break;
+	}
+
+	/* Options:
+	 *   disable_polarity_correction = 0 (default)
+	 *       Automatic Correction for Reversed Cable Polarity
+	 *   0 - Disabled
+	 *   1 - Enabled
+	 */
+	data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
+	if (phy->disable_polarity_correction)
+		data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
+
+	ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL, data);
+	if (ret_val)
+		return ret_val;
+
+	/* SW Reset the PHY so all changes take effect */
+	ret_val = hw->phy.ops.commit(hw);
+	if (ret_val) {
+		e_dbg("Error Resetting the PHY\n");
+		return ret_val;
+	}
+
+	/* Bypass Rx and Tx FIFO's */
+	reg = E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL;
+	data = (E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
+		E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
+	ret_val = e1000_write_kmrn_reg_80003es2lan(hw, reg, data);
+	if (ret_val)
+		return ret_val;
+
+	reg = E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE;
+	ret_val = e1000_read_kmrn_reg_80003es2lan(hw, reg, &data);
+	if (ret_val)
+		return ret_val;
+	data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
+	ret_val = e1000_write_kmrn_reg_80003es2lan(hw, reg, data);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL_2, &data);
+	if (ret_val)
+		return ret_val;
+
+	data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG;
+	ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL_2, data);
+	if (ret_val)
+		return ret_val;
+
+	reg = er32(CTRL_EXT);
+	reg &= ~E1000_CTRL_EXT_LINK_MODE_MASK;
+	ew32(CTRL_EXT, reg);
+
+	ret_val = e1e_rphy(hw, GG82563_PHY_PWR_MGMT_CTRL, &data);
+	if (ret_val)
+		return ret_val;
+
+	/* Do not init these registers when the HW is in IAMT mode, since the
+	 * firmware will have already initialized them.  We only initialize
+	 * them if the HW is not in IAMT mode.
+	 */
+	if (!hw->mac.ops.check_mng_mode(hw)) {
+		/* Enable Electrical Idle on the PHY */
+		data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
+		ret_val = e1e_wphy(hw, GG82563_PHY_PWR_MGMT_CTRL, data);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &data);
+		if (ret_val)
+			return ret_val;
+
+		data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+		ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Workaround: Disable padding in Kumeran interface in the MAC
+	 * and in the PHY to avoid CRC errors.
+	 */
+	ret_val = e1e_rphy(hw, GG82563_PHY_INBAND_CTRL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data |= GG82563_ICR_DIS_PADDING;
+	ret_val = e1e_wphy(hw, GG82563_PHY_INBAND_CTRL, data);
+	if (ret_val)
+		return ret_val;
+
+	return 0;
+}
+
+/**
+ *  e1000_setup_copper_link_80003es2lan - Setup Copper Link for ESB2
+ *  @hw: pointer to the HW structure
+ *
+ *  Essentially a wrapper for setting up all things "copper" related.
+ *  This is a function pointer entry point called by the mac module.
+ **/
+static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+	u16 reg_data;
+
+	ctrl = er32(CTRL);
+	ctrl |= E1000_CTRL_SLU;
+	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	ew32(CTRL, ctrl);
+
+	/* Set the mac to wait the maximum time between each
+	 * iteration and increase the max iterations when
+	 * polling the phy; this fixes erroneous timeouts at 10Mbps.
+	 */
+	ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4),
+						   0xFFFF);
+	if (ret_val)
+		return ret_val;
+	ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
+						  &reg_data);
+	if (ret_val)
+		return ret_val;
+	reg_data |= 0x3F;
+	ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
+						   reg_data);
+	if (ret_val)
+		return ret_val;
+	ret_val =
+	    e1000_read_kmrn_reg_80003es2lan(hw,
+					    E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
+					    &reg_data);
+	if (ret_val)
+		return ret_val;
+	reg_data |= E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING;
+	ret_val =
+	    e1000_write_kmrn_reg_80003es2lan(hw,
+					     E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
+					     reg_data);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_copper_link_setup_gg82563_80003es2lan(hw);
+	if (ret_val)
+		return ret_val;
+
+	return e1000e_setup_copper_link(hw);
+}
+
+/**
+ *  e1000_cfg_on_link_up_80003es2lan - es2 link configuration after link-up
+ *  @hw: pointer to the HW structure
+ *  @duplex: current duplex setting
+ *
+ *  Configure the KMRN interface by applying last minute quirks for
+ *  10/100 operation.
+ **/
+static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 speed;
+	u16 duplex;
+
+	if (hw->phy.media_type == e1000_media_type_copper) {
+		ret_val = e1000e_get_speed_and_duplex_copper(hw, &speed,
+							     &duplex);
+		if (ret_val)
+			return ret_val;
+
+		if (speed == SPEED_1000)
+			ret_val = e1000_cfg_kmrn_1000_80003es2lan(hw);
+		else
+			ret_val = e1000_cfg_kmrn_10_100_80003es2lan(hw, duplex);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_cfg_kmrn_10_100_80003es2lan - Apply "quirks" for 10/100 operation
+ *  @hw: pointer to the HW structure
+ *  @duplex: current duplex setting
+ *
+ *  Configure the KMRN interface by applying last minute quirks for
+ *  10/100 operation.
+ **/
+static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
+{
+	s32 ret_val;
+	u32 tipg;
+	u32 i = 0;
+	u16 reg_data, reg_data2;
+
+	reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
+	ret_val =
+	    e1000_write_kmrn_reg_80003es2lan(hw,
+					     E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+					     reg_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Configure Transmit Inter-Packet Gap */
+	tipg = er32(TIPG);
+	tipg &= ~E1000_TIPG_IPGT_MASK;
+	tipg |= DEFAULT_TIPG_IPGT_10_100_80003ES2LAN;
+	ew32(TIPG, tipg);
+
+	do {
+		ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data2);
+		if (ret_val)
+			return ret_val;
+		i++;
+	} while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
+
+	if (duplex == HALF_DUPLEX)
+		reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+	else
+		reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+
+	return e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+}
+
+/**
+ *  e1000_cfg_kmrn_1000_80003es2lan - Apply "quirks" for gigabit operation
+ *  @hw: pointer to the HW structure
+ *
+ *  Configure the KMRN interface by applying last minute quirks for
+ *  gigabit operation.
+ **/
+static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 reg_data, reg_data2;
+	u32 tipg;
+	u32 i = 0;
+
+	reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
+	ret_val =
+	    e1000_write_kmrn_reg_80003es2lan(hw,
+					     E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+					     reg_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Configure Transmit Inter-Packet Gap */
+	tipg = er32(TIPG);
+	tipg &= ~E1000_TIPG_IPGT_MASK;
+	tipg |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
+	ew32(TIPG, tipg);
+
+	do {
+		ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data2);
+		if (ret_val)
+			return ret_val;
+		i++;
+	} while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
+
+	reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+
+	return e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+}
+
+/**
+ *  e1000_read_kmrn_reg_80003es2lan - Read kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquire semaphore, then read the PHY register at offset
+ *  using the kumeran interface.  The information retrieved is stored in data.
+ *  Release the semaphore before exiting.
+ **/
+static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
+					   u16 *data)
+{
+	u32 kmrnctrlsta;
+	s32 ret_val;
+
+	ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
+	if (ret_val)
+		return ret_val;
+
+	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+		       E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+	ew32(KMRNCTRLSTA, kmrnctrlsta);
+	e1e_flush();
+
+	udelay(2);
+
+	kmrnctrlsta = er32(KMRNCTRLSTA);
+	*data = (u16)kmrnctrlsta;
+
+	e1000_release_mac_csr_80003es2lan(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_kmrn_reg_80003es2lan - Write kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquire semaphore, then write the data to PHY register
+ *  at the offset using the kumeran interface.  Release semaphore
+ *  before exiting.
+ **/
+static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
+					    u16 data)
+{
+	u32 kmrnctrlsta;
+	s32 ret_val;
+
+	ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
+	if (ret_val)
+		return ret_val;
+
+	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+		       E1000_KMRNCTRLSTA_OFFSET) | data;
+	ew32(KMRNCTRLSTA, kmrnctrlsta);
+	e1e_flush();
+
+	udelay(2);
+
+	e1000_release_mac_csr_80003es2lan(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_mac_addr_80003es2lan - Read device MAC address
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	/* If there's an alternate MAC address place it in RAR0
+	 * so that it will override the Si installed default perm
+	 * address.
+	 */
+	ret_val = e1000_check_alt_mac_addr_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	return e1000_read_mac_addr_generic(hw);
+}
+
+/**
+ * e1000_power_down_phy_copper_80003es2lan - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw)
+{
+	/* If the management interface is not enabled, then power down */
+	if (!(hw->mac.ops.check_mng_mode(hw) ||
+	      hw->phy.ops.check_reset_block(hw)))
+		e1000_power_down_phy_copper(hw);
+}
+
+/**
+ *  e1000_clear_hw_cntrs_80003es2lan - Clear device specific hardware counters
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the hardware counters by reading the counter registers.
+ **/
+static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
+{
+	e1000e_clear_hw_cntrs_base(hw);
+
+	er32(PRC64);
+	er32(PRC127);
+	er32(PRC255);
+	er32(PRC511);
+	er32(PRC1023);
+	er32(PRC1522);
+	er32(PTC64);
+	er32(PTC127);
+	er32(PTC255);
+	er32(PTC511);
+	er32(PTC1023);
+	er32(PTC1522);
+
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
+
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
+
+	er32(IAC);
+	er32(ICRXOC);
+
+	er32(ICRXPTC);
+	er32(ICRXATC);
+	er32(ICTXPTC);
+	er32(ICTXATC);
+	er32(ICTXQEC);
+	er32(ICTXQMTC);
+	er32(ICRXDMTC);
+}
+
+static const struct e1000_mac_operations es2_mac_ops = {
+	.read_mac_addr		= e1000_read_mac_addr_80003es2lan,
+	.id_led_init		= e1000e_id_led_init_generic,
+	.blink_led		= e1000e_blink_led_generic,
+	.check_mng_mode		= e1000e_check_mng_mode_generic,
+	/* check_for_link dependent on media type */
+	.cleanup_led		= e1000e_cleanup_led_generic,
+	.clear_hw_cntrs		= e1000_clear_hw_cntrs_80003es2lan,
+	.get_bus_info		= e1000e_get_bus_info_pcie,
+	.set_lan_id		= e1000_set_lan_id_multi_port_pcie,
+	.get_link_up_info	= e1000_get_link_up_info_80003es2lan,
+	.led_on			= e1000e_led_on_generic,
+	.led_off		= e1000e_led_off_generic,
+	.update_mc_addr_list	= e1000e_update_mc_addr_list_generic,
+	.write_vfta		= e1000_write_vfta_generic,
+	.clear_vfta		= e1000_clear_vfta_generic,
+	.reset_hw		= e1000_reset_hw_80003es2lan,
+	.init_hw		= e1000_init_hw_80003es2lan,
+	.setup_link		= e1000e_setup_link_generic,
+	/* setup_physical_interface dependent on media type */
+	.setup_led		= e1000e_setup_led_generic,
+	.config_collision_dist	= e1000e_config_collision_dist_generic,
+	.rar_set		= e1000e_rar_set_generic,
+	.rar_get_count		= e1000e_rar_get_count_generic,
+};
+
+static const struct e1000_phy_operations es2_phy_ops = {
+	.acquire		= e1000_acquire_phy_80003es2lan,
+	.check_polarity		= e1000_check_polarity_m88,
+	.check_reset_block	= e1000e_check_reset_block_generic,
+	.commit			= e1000e_phy_sw_reset,
+	.force_speed_duplex	= e1000_phy_force_speed_duplex_80003es2lan,
+	.get_cfg_done		= e1000_get_cfg_done_80003es2lan,
+	.get_cable_length	= e1000_get_cable_length_80003es2lan,
+	.get_info		= e1000e_get_phy_info_m88,
+	.read_reg		= e1000_read_phy_reg_gg82563_80003es2lan,
+	.release		= e1000_release_phy_80003es2lan,
+	.reset			= e1000e_phy_hw_reset_generic,
+	.set_d0_lplu_state	= NULL,
+	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
+	.write_reg		= e1000_write_phy_reg_gg82563_80003es2lan,
+	.cfg_on_link_up		= e1000_cfg_on_link_up_80003es2lan,
+};
+
+static const struct e1000_nvm_operations es2_nvm_ops = {
+	.acquire		= e1000_acquire_nvm_80003es2lan,
+	.read			= e1000e_read_nvm_eerd,
+	.release		= e1000_release_nvm_80003es2lan,
+	.reload			= e1000e_reload_nvm_generic,
+	.update			= e1000e_update_nvm_checksum_generic,
+	.valid_led_default	= e1000e_valid_led_default,
+	.validate		= e1000e_validate_nvm_checksum_generic,
+	.write			= e1000_write_nvm_80003es2lan,
+};
+
+const struct e1000_info e1000_es2_info = {
+	.mac			= e1000_80003es2lan,
+	.flags			= FLAG_HAS_HW_VLAN_FILTER
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_HAS_WOL
+				  | FLAG_APME_IN_CTRL3
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_RX_NEEDS_RESTART /* errata */
+				  | FLAG_TARC_SET_BIT_ZERO /* errata */
+				  | FLAG_APME_CHECK_PORT_B
+				  | FLAG_DISABLE_FC_PAUSE_TIME, /* errata */
+	.flags2			= FLAG2_DMA_BURST,
+	.pba			= 38,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_80003es2lan,
+	.mac_ops		= &es2_mac_ops,
+	.phy_ops		= &es2_phy_ops,
+	.nvm_ops		= &es2_nvm_ops,
+};
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.h b/drivers/net/ethernet/intel/e1000e/80003es2lan.h
new file mode 100644
index 000000000..535a94309
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.h
@@ -0,0 +1,88 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000E_80003ES2LAN_H_
+#define _E1000E_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL	0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL	0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE	0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS	0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS	0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING	0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT	0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE		0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK		0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO	0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gig Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN	0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN	0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN	0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE	0x0002	/* 1=Reversal Dis */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK	0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI		0x0000	/* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX	0x0020	/* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO	0x0060	/* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG		0x2000	/* 1=Reverse Auto-Neg */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK		0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5		0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25		0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25		0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX		0x0010	/* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26)
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH		0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER		0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY			0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE	0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING			0x0010	/* Disable Padding */
+
+#endif
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
new file mode 100644
index 000000000..32e77755a
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -0,0 +1,2063 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* 82571EB Gigabit Ethernet Controller
+ * 82571EB Gigabit Ethernet Controller (Copper)
+ * 82571EB Gigabit Ethernet Controller (Fiber)
+ * 82571EB Dual Port Gigabit Mezzanine Adapter
+ * 82571EB Quad Port Gigabit Mezzanine Adapter
+ * 82571PT Gigabit PT Quad Port Server ExpressModule
+ * 82572EI Gigabit Ethernet Controller (Copper)
+ * 82572EI Gigabit Ethernet Controller (Fiber)
+ * 82572EI Gigabit Ethernet Controller
+ * 82573V Gigabit Ethernet Controller (Copper)
+ * 82573E Gigabit Ethernet Controller (Copper)
+ * 82573L Gigabit Ethernet Controller
+ * 82574L Gigabit Network Connection
+ * 82583V Gigabit Network Connection
+ */
+
+#include "e1000.h"
+
+static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
+static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);
+static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
+				      u16 words, u16 *data);
+static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
+static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
+static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
+static s32 e1000_led_on_82574(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
+static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active);
+
+/**
+ *  e1000_init_phy_params_82571 - Init PHY func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+
+	if (hw->phy.media_type != e1000_media_type_copper) {
+		phy->type = e1000_phy_none;
+		return 0;
+	}
+
+	phy->addr = 1;
+	phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+	phy->reset_delay_us = 100;
+
+	phy->ops.power_up = e1000_power_up_phy_copper;
+	phy->ops.power_down = e1000_power_down_phy_copper_82571;
+
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		phy->type = e1000_phy_igp_2;
+		break;
+	case e1000_82573:
+		phy->type = e1000_phy_m88;
+		break;
+	case e1000_82574:
+	case e1000_82583:
+		phy->type = e1000_phy_bm;
+		phy->ops.acquire = e1000_get_hw_semaphore_82574;
+		phy->ops.release = e1000_put_hw_semaphore_82574;
+		phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
+		phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574;
+		break;
+	default:
+		return -E1000_ERR_PHY;
+	}
+
+	/* This can only be done after all function pointers are setup. */
+	ret_val = e1000_get_phy_id_82571(hw);
+	if (ret_val) {
+		e_dbg("Error getting PHY ID\n");
+		return ret_val;
+	}
+
+	/* Verify phy id */
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		if (phy->id != IGP01E1000_I_PHY_ID)
+			ret_val = -E1000_ERR_PHY;
+		break;
+	case e1000_82573:
+		if (phy->id != M88E1111_I_PHY_ID)
+			ret_val = -E1000_ERR_PHY;
+		break;
+	case e1000_82574:
+	case e1000_82583:
+		if (phy->id != BME1000_E_PHY_ID_R2)
+			ret_val = -E1000_ERR_PHY;
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		break;
+	}
+
+	if (ret_val)
+		e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_init_nvm_params_82571 - Init NVM func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = er32(EECD);
+	u16 size;
+
+	nvm->opcode_bits = 8;
+	nvm->delay_usec = 1;
+	switch (nvm->override) {
+	case e1000_nvm_override_spi_large:
+		nvm->page_size = 32;
+		nvm->address_bits = 16;
+		break;
+	case e1000_nvm_override_spi_small:
+		nvm->page_size = 8;
+		nvm->address_bits = 8;
+		break;
+	default:
+		nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+		nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
+		break;
+	}
+
+	switch (hw->mac.type) {
+	case e1000_82573:
+	case e1000_82574:
+	case e1000_82583:
+		if (((eecd >> 15) & 0x3) == 0x3) {
+			nvm->type = e1000_nvm_flash_hw;
+			nvm->word_size = 2048;
+			/* Autonomous Flash update bit must be cleared due
+			 * to Flash update issue.
+			 */
+			eecd &= ~E1000_EECD_AUPDEN;
+			ew32(EECD, eecd);
+			break;
+		}
+		/* Fall Through */
+	default:
+		nvm->type = e1000_nvm_eeprom_spi;
+		size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+			     E1000_EECD_SIZE_EX_SHIFT);
+		/* Added to a constant, "size" becomes the left-shift value
+		 * for setting word_size.
+		 */
+		size += NVM_WORD_SIZE_BASE_SHIFT;
+
+		/* EEPROM access above 16k is unsupported */
+		if (size > 14)
+			size = 14;
+		nvm->word_size = 1 << size;
+		break;
+	}
+
+	/* Function Pointers */
+	switch (hw->mac.type) {
+	case e1000_82574:
+	case e1000_82583:
+		nvm->ops.acquire = e1000_get_hw_semaphore_82574;
+		nvm->ops.release = e1000_put_hw_semaphore_82574;
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_init_mac_params_82571 - Init MAC func ptrs.
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_mac_params_82571(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 swsm = 0;
+	u32 swsm2 = 0;
+	bool force_clear_smbi = false;
+
+	/* Set media type and media-dependent function pointers */
+	switch (hw->adapter->pdev->device) {
+	case E1000_DEV_ID_82571EB_FIBER:
+	case E1000_DEV_ID_82572EI_FIBER:
+	case E1000_DEV_ID_82571EB_QUAD_FIBER:
+		hw->phy.media_type = e1000_media_type_fiber;
+		mac->ops.setup_physical_interface =
+		    e1000_setup_fiber_serdes_link_82571;
+		mac->ops.check_for_link = e1000e_check_for_fiber_link;
+		mac->ops.get_link_up_info =
+		    e1000e_get_speed_and_duplex_fiber_serdes;
+		break;
+	case E1000_DEV_ID_82571EB_SERDES:
+	case E1000_DEV_ID_82571EB_SERDES_DUAL:
+	case E1000_DEV_ID_82571EB_SERDES_QUAD:
+	case E1000_DEV_ID_82572EI_SERDES:
+		hw->phy.media_type = e1000_media_type_internal_serdes;
+		mac->ops.setup_physical_interface =
+		    e1000_setup_fiber_serdes_link_82571;
+		mac->ops.check_for_link = e1000_check_for_serdes_link_82571;
+		mac->ops.get_link_up_info =
+		    e1000e_get_speed_and_duplex_fiber_serdes;
+		break;
+	default:
+		hw->phy.media_type = e1000_media_type_copper;
+		mac->ops.setup_physical_interface =
+		    e1000_setup_copper_link_82571;
+		mac->ops.check_for_link = e1000e_check_for_copper_link;
+		mac->ops.get_link_up_info = e1000e_get_speed_and_duplex_copper;
+		break;
+	}
+
+	/* Set mta register count */
+	mac->mta_reg_count = 128;
+	/* Set rar entry count */
+	mac->rar_entry_count = E1000_RAR_ENTRIES;
+	/* Adaptive IFS supported */
+	mac->adaptive_ifs = true;
+
+	/* MAC-specific function pointers */
+	switch (hw->mac.type) {
+	case e1000_82573:
+		mac->ops.set_lan_id = e1000_set_lan_id_single_port;
+		mac->ops.check_mng_mode = e1000e_check_mng_mode_generic;
+		mac->ops.led_on = e1000e_led_on_generic;
+		mac->ops.blink_led = e1000e_blink_led_generic;
+
+		/* FWSM register */
+		mac->has_fwsm = true;
+		/* ARC supported; valid only if manageability features are
+		 * enabled.
+		 */
+		mac->arc_subsystem_valid = !!(er32(FWSM) &
+					      E1000_FWSM_MODE_MASK);
+		break;
+	case e1000_82574:
+	case e1000_82583:
+		mac->ops.set_lan_id = e1000_set_lan_id_single_port;
+		mac->ops.check_mng_mode = e1000_check_mng_mode_82574;
+		mac->ops.led_on = e1000_led_on_82574;
+		break;
+	default:
+		mac->ops.check_mng_mode = e1000e_check_mng_mode_generic;
+		mac->ops.led_on = e1000e_led_on_generic;
+		mac->ops.blink_led = e1000e_blink_led_generic;
+
+		/* FWSM register */
+		mac->has_fwsm = true;
+		break;
+	}
+
+	/* Ensure that the inter-port SWSM.SMBI lock bit is clear before
+	 * first NVM or PHY access. This should be done for single-port
+	 * devices, and for one port only on dual-port devices so that
+	 * for those devices we can still use the SMBI lock to synchronize
+	 * inter-port accesses to the PHY & NVM.
+	 */
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		swsm2 = er32(SWSM2);
+
+		if (!(swsm2 & E1000_SWSM2_LOCK)) {
+			/* Only do this for the first interface on this card */
+			ew32(SWSM2, swsm2 | E1000_SWSM2_LOCK);
+			force_clear_smbi = true;
+		} else {
+			force_clear_smbi = false;
+		}
+		break;
+	default:
+		force_clear_smbi = true;
+		break;
+	}
+
+	if (force_clear_smbi) {
+		/* Make sure SWSM.SMBI is clear */
+		swsm = er32(SWSM);
+		if (swsm & E1000_SWSM_SMBI) {
+			/* This bit should not be set on a first interface, and
+			 * indicates that the bootagent or EFI code has
+			 * improperly left this bit enabled
+			 */
+			e_dbg("Please update your 82571 Bootagent\n");
+		}
+		ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
+	}
+
+	/* Initialize device specific counter of SMBI acquisition timeouts. */
+	hw->dev_spec.e82571.smb_counter = 0;
+
+	return 0;
+}
+
+static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	static int global_quad_port_a;	/* global port a indication */
+	struct pci_dev *pdev = adapter->pdev;
+	int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
+	s32 rc;
+
+	rc = e1000_init_mac_params_82571(hw);
+	if (rc)
+		return rc;
+
+	rc = e1000_init_nvm_params_82571(hw);
+	if (rc)
+		return rc;
+
+	rc = e1000_init_phy_params_82571(hw);
+	if (rc)
+		return rc;
+
+	/* tag quad port adapters first, it's used below */
+	switch (pdev->device) {
+	case E1000_DEV_ID_82571EB_QUAD_COPPER:
+	case E1000_DEV_ID_82571EB_QUAD_FIBER:
+	case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
+	case E1000_DEV_ID_82571PT_QUAD_COPPER:
+		adapter->flags |= FLAG_IS_QUAD_PORT;
+		/* mark the first port */
+		if (global_quad_port_a == 0)
+			adapter->flags |= FLAG_IS_QUAD_PORT_A;
+		/* Reset for multiple quad port adapters */
+		global_quad_port_a++;
+		if (global_quad_port_a == 4)
+			global_quad_port_a = 0;
+		break;
+	default:
+		break;
+	}
+
+	switch (adapter->hw.mac.type) {
+	case e1000_82571:
+		/* these dual ports don't have WoL on port B at all */
+		if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) ||
+		     (pdev->device == E1000_DEV_ID_82571EB_SERDES) ||
+		     (pdev->device == E1000_DEV_ID_82571EB_COPPER)) &&
+		    (is_port_b))
+			adapter->flags &= ~FLAG_HAS_WOL;
+		/* quad ports only support WoL on port A */
+		if (adapter->flags & FLAG_IS_QUAD_PORT &&
+		    (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
+			adapter->flags &= ~FLAG_HAS_WOL;
+		/* Does not support WoL on any port */
+		if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
+			adapter->flags &= ~FLAG_HAS_WOL;
+		break;
+	case e1000_82573:
+		if (pdev->device == E1000_DEV_ID_82573L) {
+			adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
+			adapter->max_hw_frame_size = DEFAULT_JUMBO;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_get_phy_id_82571 - Retrieve the PHY ID and revision
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the PHY registers and stores the PHY ID and possibly the PHY
+ *  revision in the hardware structure.
+ **/
+static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_id = 0;
+
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		/* The 82571 firmware may still be configuring the PHY.
+		 * In this case, we cannot access the PHY until the
+		 * configuration is done.  So we explicitly set the
+		 * PHY ID.
+		 */
+		phy->id = IGP01E1000_I_PHY_ID;
+		break;
+	case e1000_82573:
+		return e1000e_get_phy_id(hw);
+	case e1000_82574:
+	case e1000_82583:
+		ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id);
+		if (ret_val)
+			return ret_val;
+
+		phy->id = (u32)(phy_id << 16);
+		usleep_range(20, 40);
+		ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id);
+		if (ret_val)
+			return ret_val;
+
+		phy->id |= (u32)(phy_id);
+		phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+		break;
+	default:
+		return -E1000_ERR_PHY;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_get_hw_semaphore_82571 - Acquire hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the HW semaphore to access the PHY or NVM
+ **/
+static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
+{
+	u32 swsm;
+	s32 sw_timeout = hw->nvm.word_size + 1;
+	s32 fw_timeout = hw->nvm.word_size + 1;
+	s32 i = 0;
+
+	/* If we have timedout 3 times on trying to acquire
+	 * the inter-port SMBI semaphore, there is old code
+	 * operating on the other port, and it is not
+	 * releasing SMBI. Modify the number of times that
+	 * we try for the semaphore to interwork with this
+	 * older code.
+	 */
+	if (hw->dev_spec.e82571.smb_counter > 2)
+		sw_timeout = 1;
+
+	/* Get the SW semaphore */
+	while (i < sw_timeout) {
+		swsm = er32(SWSM);
+		if (!(swsm & E1000_SWSM_SMBI))
+			break;
+
+		usleep_range(50, 100);
+		i++;
+	}
+
+	if (i == sw_timeout) {
+		e_dbg("Driver can't access device - SMBI bit is set.\n");
+		hw->dev_spec.e82571.smb_counter++;
+	}
+	/* Get the FW semaphore. */
+	for (i = 0; i < fw_timeout; i++) {
+		swsm = er32(SWSM);
+		ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
+
+		/* Semaphore acquired if bit latched */
+		if (er32(SWSM) & E1000_SWSM_SWESMBI)
+			break;
+
+		usleep_range(50, 100);
+	}
+
+	if (i == fw_timeout) {
+		/* Release semaphores */
+		e1000_put_hw_semaphore_82571(hw);
+		e_dbg("Driver can't access the NVM\n");
+		return -E1000_ERR_NVM;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_put_hw_semaphore_82571 - Release hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Release hardware semaphore used to access the PHY or NVM
+ **/
+static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
+{
+	u32 swsm;
+
+	swsm = er32(SWSM);
+	swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+	ew32(SWSM, swsm);
+}
+
+/**
+ *  e1000_get_hw_semaphore_82573 - Acquire hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the HW semaphore during reset.
+ *
+ **/
+static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
+{
+	u32 extcnf_ctrl;
+	s32 i = 0;
+
+	extcnf_ctrl = er32(EXTCNF_CTRL);
+	do {
+		extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
+		extcnf_ctrl = er32(EXTCNF_CTRL);
+
+		if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
+			break;
+
+		usleep_range(2000, 4000);
+		i++;
+	} while (i < MDIO_OWNERSHIP_TIMEOUT);
+
+	if (i == MDIO_OWNERSHIP_TIMEOUT) {
+		/* Release semaphores */
+		e1000_put_hw_semaphore_82573(hw);
+		e_dbg("Driver can't access the PHY\n");
+		return -E1000_ERR_PHY;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_put_hw_semaphore_82573 - Release hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Release hardware semaphore used during reset.
+ *
+ **/
+static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw)
+{
+	u32 extcnf_ctrl;
+
+	extcnf_ctrl = er32(EXTCNF_CTRL);
+	extcnf_ctrl &= ~E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+	ew32(EXTCNF_CTRL, extcnf_ctrl);
+}
+
+static DEFINE_MUTEX(swflag_mutex);
+
+/**
+ *  e1000_get_hw_semaphore_82574 - Acquire hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the HW semaphore to access the PHY or NVM.
+ *
+ **/
+static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	mutex_lock(&swflag_mutex);
+	ret_val = e1000_get_hw_semaphore_82573(hw);
+	if (ret_val)
+		mutex_unlock(&swflag_mutex);
+	return ret_val;
+}
+
+/**
+ *  e1000_put_hw_semaphore_82574 - Release hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Release hardware semaphore used to access the PHY or NVM
+ *
+ **/
+static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
+{
+	e1000_put_hw_semaphore_82573(hw);
+	mutex_unlock(&swflag_mutex);
+}
+
+/**
+ *  e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU D0 state according to the active flag.
+ *  LPLU will not be activated unless the
+ *  device autonegotiation advertisement meets standards of
+ *  either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+	u32 data = er32(POEMB);
+
+	if (active)
+		data |= E1000_PHY_CTRL_D0A_LPLU;
+	else
+		data &= ~E1000_PHY_CTRL_D0A_LPLU;
+
+	ew32(POEMB, data);
+	return 0;
+}
+
+/**
+ *  e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  The low power link up (lplu) state is set to the power management level D3
+ *  when active is true, else clear lplu for D3. LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.
+ **/
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+	u32 data = er32(POEMB);
+
+	if (!active) {
+		data &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+	} else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+		   (hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) ||
+		   (hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) {
+		data |= E1000_PHY_CTRL_NOND0A_LPLU;
+	}
+
+	ew32(POEMB, data);
+	return 0;
+}
+
+/**
+ *  e1000_acquire_nvm_82571 - Request for access to the EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  To gain access to the EEPROM, first we must obtain a hardware semaphore.
+ *  Then for non-82573 hardware, set the EEPROM access request bit and wait
+ *  for EEPROM access grant bit.  If the access grant bit is not set, release
+ *  hardware semaphore.
+ **/
+static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	ret_val = e1000_get_hw_semaphore_82571(hw);
+	if (ret_val)
+		return ret_val;
+
+	switch (hw->mac.type) {
+	case e1000_82573:
+		break;
+	default:
+		ret_val = e1000e_acquire_nvm(hw);
+		break;
+	}
+
+	if (ret_val)
+		e1000_put_hw_semaphore_82571(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_release_nvm_82571 - Release exclusive access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+static void e1000_release_nvm_82571(struct e1000_hw *hw)
+{
+	e1000e_release_nvm(hw);
+	e1000_put_hw_semaphore_82571(hw);
+}
+
+/**
+ *  e1000_write_nvm_82571 - Write to EEPROM using appropriate interface
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  For non-82573 silicon, write data to EEPROM at offset using SPI interface.
+ *
+ *  If e1000e_update_nvm_checksum is not called after this function, the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
+				 u16 *data)
+{
+	s32 ret_val;
+
+	switch (hw->mac.type) {
+	case e1000_82573:
+	case e1000_82574:
+	case e1000_82583:
+		ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data);
+		break;
+	case e1000_82571:
+	case e1000_82572:
+		ret_val = e1000e_write_nvm_spi(hw, offset, words, data);
+		break;
+	default:
+		ret_val = -E1000_ERR_NVM;
+		break;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_update_nvm_checksum_82571 - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  up to the checksum.  Then calculates the EEPROM checksum and writes the
+ *  value to the EEPROM.
+ **/
+static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
+{
+	u32 eecd;
+	s32 ret_val;
+	u16 i;
+
+	ret_val = e1000e_update_nvm_checksum_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* If our nvm is an EEPROM, then we're done
+	 * otherwise, commit the checksum to the flash NVM.
+	 */
+	if (hw->nvm.type != e1000_nvm_flash_hw)
+		return 0;
+
+	/* Check for pending operations. */
+	for (i = 0; i < E1000_FLASH_UPDATES; i++) {
+		usleep_range(1000, 2000);
+		if (!(er32(EECD) & E1000_EECD_FLUPD))
+			break;
+	}
+
+	if (i == E1000_FLASH_UPDATES)
+		return -E1000_ERR_NVM;
+
+	/* Reset the firmware if using STM opcode. */
+	if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) {
+		/* The enabling of and the actual reset must be done
+		 * in two write cycles.
+		 */
+		ew32(HICR, E1000_HICR_FW_RESET_ENABLE);
+		e1e_flush();
+		ew32(HICR, E1000_HICR_FW_RESET);
+	}
+
+	/* Commit the write to flash */
+	eecd = er32(EECD) | E1000_EECD_FLUPD;
+	ew32(EECD, eecd);
+
+	for (i = 0; i < E1000_FLASH_UPDATES; i++) {
+		usleep_range(1000, 2000);
+		if (!(er32(EECD) & E1000_EECD_FLUPD))
+			break;
+	}
+
+	if (i == E1000_FLASH_UPDATES)
+		return -E1000_ERR_NVM;
+
+	return 0;
+}
+
+/**
+ *  e1000_validate_nvm_checksum_82571 - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
+{
+	if (hw->nvm.type == e1000_nvm_flash_hw)
+		e1000_fix_nvm_checksum_82571(hw);
+
+	return e1000e_validate_nvm_checksum_generic(hw);
+}
+
+/**
+ *  e1000_write_nvm_eewr_82571 - Write to EEPROM for 82573 silicon
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  After checking for invalid values, poll the EEPROM to ensure the previous
+ *  command has completed before trying to write the next word.  After write
+ *  poll for completion.
+ *
+ *  If e1000e_update_nvm_checksum is not called after this function, the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
+				      u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 i, eewr = 0;
+	s32 ret_val = 0;
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		e_dbg("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	for (i = 0; i < words; i++) {
+		eewr = ((data[i] << E1000_NVM_RW_REG_DATA) |
+			((offset + i) << E1000_NVM_RW_ADDR_SHIFT) |
+			E1000_NVM_RW_REG_START);
+
+		ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+		if (ret_val)
+			break;
+
+		ew32(EEWR, eewr);
+
+		ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+		if (ret_val)
+			break;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_cfg_done_82571 - Poll for configuration done
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the management control register for the config done bit to be set.
+ **/
+static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
+{
+	s32 timeout = PHY_CFG_TIMEOUT;
+
+	while (timeout) {
+		if (er32(EEMNGCTL) & E1000_NVM_CFG_DONE_PORT_0)
+			break;
+		usleep_range(1000, 2000);
+		timeout--;
+	}
+	if (!timeout) {
+		e_dbg("MNG configuration cycle has not completed.\n");
+		return -E1000_ERR_RESET;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU D0 state according to the active flag.  When activating LPLU
+ *  this function also disables smart speed and vice versa.  LPLU will not be
+ *  activated unless the device autonegotiation advertisement meets standards
+ *  of either 10 or 10/100 or 10/100/1000 at all duplexes.  This is a function
+ *  pointer entry point only called by PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+	if (ret_val)
+		return ret_val;
+
+	if (active) {
+		data |= IGP02E1000_PM_D0_LPLU;
+		ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
+		if (ret_val)
+			return ret_val;
+
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+		if (ret_val)
+			return ret_val;
+		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
+		if (ret_val)
+			return ret_val;
+	} else {
+		data &= ~IGP02E1000_PM_D0_LPLU;
+		ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
+		/* LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+
+			data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		} else if (phy->smart_speed == e1000_smart_speed_off) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_reset_hw_82571 - Reset hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets the hardware into a known state.
+ **/
+static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
+{
+	u32 ctrl, ctrl_ext, eecd, tctl;
+	s32 ret_val;
+
+	/* Prevent the PCI-E bus from sticking if there is no TLP connection
+	 * on the last TLP read/write transaction when MAC is reset.
+	 */
+	ret_val = e1000e_disable_pcie_master(hw);
+	if (ret_val)
+		e_dbg("PCI-E Master disable polling has failed.\n");
+
+	e_dbg("Masking off all interrupts\n");
+	ew32(IMC, 0xffffffff);
+
+	ew32(RCTL, 0);
+	tctl = er32(TCTL);
+	tctl &= ~E1000_TCTL_EN;
+	ew32(TCTL, tctl);
+	e1e_flush();
+
+	usleep_range(10000, 20000);
+
+	/* Must acquire the MDIO ownership before MAC reset.
+	 * Ownership defaults to firmware after a reset.
+	 */
+	switch (hw->mac.type) {
+	case e1000_82573:
+		ret_val = e1000_get_hw_semaphore_82573(hw);
+		break;
+	case e1000_82574:
+	case e1000_82583:
+		ret_val = e1000_get_hw_semaphore_82574(hw);
+		break;
+	default:
+		break;
+	}
+
+	ctrl = er32(CTRL);
+
+	e_dbg("Issuing a global reset to MAC\n");
+	ew32(CTRL, ctrl | E1000_CTRL_RST);
+
+	/* Must release MDIO ownership and mutex after MAC reset. */
+	switch (hw->mac.type) {
+	case e1000_82573:
+		/* Release mutex only if the hw semaphore is acquired */
+		if (!ret_val)
+			e1000_put_hw_semaphore_82573(hw);
+		break;
+	case e1000_82574:
+	case e1000_82583:
+		/* Release mutex only if the hw semaphore is acquired */
+		if (!ret_val)
+			e1000_put_hw_semaphore_82574(hw);
+		break;
+	default:
+		break;
+	}
+
+	if (hw->nvm.type == e1000_nvm_flash_hw) {
+		usleep_range(10, 20);
+		ctrl_ext = er32(CTRL_EXT);
+		ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+		ew32(CTRL_EXT, ctrl_ext);
+		e1e_flush();
+	}
+
+	ret_val = e1000e_get_auto_rd_done(hw);
+	if (ret_val)
+		/* We don't want to continue accessing MAC registers. */
+		return ret_val;
+
+	/* Phy configuration from NVM just starts after EECD_AUTO_RD is set.
+	 * Need to wait for Phy configuration completion before accessing
+	 * NVM and Phy.
+	 */
+
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		/* REQ and GNT bits need to be cleared when using AUTO_RD
+		 * to access the EEPROM.
+		 */
+		eecd = er32(EECD);
+		eecd &= ~(E1000_EECD_REQ | E1000_EECD_GNT);
+		ew32(EECD, eecd);
+		break;
+	case e1000_82573:
+	case e1000_82574:
+	case e1000_82583:
+		msleep(25);
+		break;
+	default:
+		break;
+	}
+
+	/* Clear any pending interrupt events. */
+	ew32(IMC, 0xffffffff);
+	er32(ICR);
+
+	if (hw->mac.type == e1000_82571) {
+		/* Install any alternate MAC address into RAR0 */
+		ret_val = e1000_check_alt_mac_addr_generic(hw);
+		if (ret_val)
+			return ret_val;
+
+		e1000e_set_laa_state_82571(hw, true);
+	}
+
+	/* Reinitialize the 82571 serdes link state machine */
+	if (hw->phy.media_type == e1000_media_type_internal_serdes)
+		hw->mac.serdes_link_state = e1000_serdes_link_down;
+
+	return 0;
+}
+
+/**
+ *  e1000_init_hw_82571 - Initialize hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This inits the hardware readying it for operation.
+ **/
+static s32 e1000_init_hw_82571(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 reg_data;
+	s32 ret_val;
+	u16 i, rar_count = mac->rar_entry_count;
+
+	e1000_initialize_hw_bits_82571(hw);
+
+	/* Initialize identification LED */
+	ret_val = mac->ops.id_led_init(hw);
+	/* An error is not fatal and we should not stop init due to this */
+	if (ret_val)
+		e_dbg("Error initializing identification LED\n");
+
+	/* Disabling VLAN filtering */
+	e_dbg("Initializing the IEEE VLAN\n");
+	mac->ops.clear_vfta(hw);
+
+	/* Setup the receive address.
+	 * If, however, a locally administered address was assigned to the
+	 * 82571, we must reserve a RAR for it to work around an issue where
+	 * resetting one port will reload the MAC on the other port.
+	 */
+	if (e1000e_get_laa_state_82571(hw))
+		rar_count--;
+	e1000e_init_rx_addrs(hw, rar_count);
+
+	/* Zero out the Multicast HASH table */
+	e_dbg("Zeroing the MTA\n");
+	for (i = 0; i < mac->mta_reg_count; i++)
+		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+	/* Setup link and flow control */
+	ret_val = mac->ops.setup_link(hw);
+
+	/* Set the transmit descriptor write-back policy */
+	reg_data = er32(TXDCTL(0));
+	reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) |
+		    E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC);
+	ew32(TXDCTL(0), reg_data);
+
+	/* ...for both queues. */
+	switch (mac->type) {
+	case e1000_82573:
+		e1000e_enable_tx_pkt_filtering(hw);
+		/* fall through */
+	case e1000_82574:
+	case e1000_82583:
+		reg_data = er32(GCR);
+		reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
+		ew32(GCR, reg_data);
+		break;
+	default:
+		reg_data = er32(TXDCTL(1));
+		reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) |
+			    E1000_TXDCTL_FULL_TX_DESC_WB |
+			    E1000_TXDCTL_COUNT_DESC);
+		ew32(TXDCTL(1), reg_data);
+		break;
+	}
+
+	/* Clear all of the statistics registers (clear on read).  It is
+	 * important that we do this after we have tried to establish link
+	 * because the symbol error count will increment wildly if there
+	 * is no link.
+	 */
+	e1000_clear_hw_cntrs_82571(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_initialize_hw_bits_82571 - Initialize hardware-dependent bits
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes required hardware-dependent bits needed for normal operation.
+ **/
+static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
+{
+	u32 reg;
+
+	/* Transmit Descriptor Control 0 */
+	reg = er32(TXDCTL(0));
+	reg |= (1 << 22);
+	ew32(TXDCTL(0), reg);
+
+	/* Transmit Descriptor Control 1 */
+	reg = er32(TXDCTL(1));
+	reg |= (1 << 22);
+	ew32(TXDCTL(1), reg);
+
+	/* Transmit Arbitration Control 0 */
+	reg = er32(TARC(0));
+	reg &= ~(0xF << 27);	/* 30:27 */
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		reg |= (1 << 23) | (1 << 24) | (1 << 25) | (1 << 26);
+		break;
+	case e1000_82574:
+	case e1000_82583:
+		reg |= (1 << 26);
+		break;
+	default:
+		break;
+	}
+	ew32(TARC(0), reg);
+
+	/* Transmit Arbitration Control 1 */
+	reg = er32(TARC(1));
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		reg &= ~((1 << 29) | (1 << 30));
+		reg |= (1 << 22) | (1 << 24) | (1 << 25) | (1 << 26);
+		if (er32(TCTL) & E1000_TCTL_MULR)
+			reg &= ~(1 << 28);
+		else
+			reg |= (1 << 28);
+		ew32(TARC(1), reg);
+		break;
+	default:
+		break;
+	}
+
+	/* Device Control */
+	switch (hw->mac.type) {
+	case e1000_82573:
+	case e1000_82574:
+	case e1000_82583:
+		reg = er32(CTRL);
+		reg &= ~(1 << 29);
+		ew32(CTRL, reg);
+		break;
+	default:
+		break;
+	}
+
+	/* Extended Device Control */
+	switch (hw->mac.type) {
+	case e1000_82573:
+	case e1000_82574:
+	case e1000_82583:
+		reg = er32(CTRL_EXT);
+		reg &= ~(1 << 23);
+		reg |= (1 << 22);
+		ew32(CTRL_EXT, reg);
+		break;
+	default:
+		break;
+	}
+
+	if (hw->mac.type == e1000_82571) {
+		reg = er32(PBA_ECC);
+		reg |= E1000_PBA_ECC_CORR_EN;
+		ew32(PBA_ECC, reg);
+	}
+
+	/* Workaround for hardware errata.
+	 * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
+	 */
+	if ((hw->mac.type == e1000_82571) || (hw->mac.type == e1000_82572)) {
+		reg = er32(CTRL_EXT);
+		reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+		ew32(CTRL_EXT, reg);
+	}
+
+	/* Disable IPv6 extension header parsing because some malformed
+	 * IPv6 headers can hang the Rx.
+	 */
+	if (hw->mac.type <= e1000_82573) {
+		reg = er32(RFCTL);
+		reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
+		ew32(RFCTL, reg);
+	}
+
+	/* PCI-Ex Control Registers */
+	switch (hw->mac.type) {
+	case e1000_82574:
+	case e1000_82583:
+		reg = er32(GCR);
+		reg |= (1 << 22);
+		ew32(GCR, reg);
+
+		/* Workaround for hardware errata.
+		 * apply workaround for hardware errata documented in errata
+		 * docs Fixes issue where some error prone or unreliable PCIe
+		 * completions are occurring, particularly with ASPM enabled.
+		 * Without fix, issue can cause Tx timeouts.
+		 */
+		reg = er32(GCR2);
+		reg |= 1;
+		ew32(GCR2, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ *  e1000_clear_vfta_82571 - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the register array which contains the VLAN filter table by
+ *  setting all the values to 0.
+ **/
+static void e1000_clear_vfta_82571(struct e1000_hw *hw)
+{
+	u32 offset;
+	u32 vfta_value = 0;
+	u32 vfta_offset = 0;
+	u32 vfta_bit_in_reg = 0;
+
+	switch (hw->mac.type) {
+	case e1000_82573:
+	case e1000_82574:
+	case e1000_82583:
+		if (hw->mng_cookie.vlan_id != 0) {
+			/* The VFTA is a 4096b bit-field, each identifying
+			 * a single VLAN ID.  The following operations
+			 * determine which 32b entry (i.e. offset) into the
+			 * array we want to set the VLAN ID (i.e. bit) of
+			 * the manageability unit.
+			 */
+			vfta_offset = (hw->mng_cookie.vlan_id >>
+				       E1000_VFTA_ENTRY_SHIFT) &
+			    E1000_VFTA_ENTRY_MASK;
+			vfta_bit_in_reg =
+			    1 << (hw->mng_cookie.vlan_id &
+				  E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+		}
+		break;
+	default:
+		break;
+	}
+	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+		/* If the offset we want to clear is the same offset of the
+		 * manageability VLAN ID, then clear all bits except that of
+		 * the manageability unit.
+		 */
+		vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+		E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value);
+		e1e_flush();
+	}
+}
+
+/**
+ *  e1000_check_mng_mode_82574 - Check manageability is enabled
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the NVM Initialization Control Word 2 and returns true
+ *  (>0) if any manageability is enabled, else false (0).
+ **/
+static bool e1000_check_mng_mode_82574(struct e1000_hw *hw)
+{
+	u16 data;
+
+	e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+	return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0;
+}
+
+/**
+ *  e1000_led_on_82574 - Turn LED on
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn LED on.
+ **/
+static s32 e1000_led_on_82574(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	u32 i;
+
+	ctrl = hw->mac.ledctl_mode2;
+	if (!(E1000_STATUS_LU & er32(STATUS))) {
+		/* If no link, then turn LED on by setting the invert bit
+		 * for each LED that's "on" (0x0E) in ledctl_mode2.
+		 */
+		for (i = 0; i < 4; i++)
+			if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
+			    E1000_LEDCTL_MODE_LED_ON)
+				ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8));
+	}
+	ew32(LEDCTL, ctrl);
+
+	return 0;
+}
+
+/**
+ *  e1000_check_phy_82574 - check 82574 phy hung state
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns whether phy is hung or not
+ **/
+bool e1000_check_phy_82574(struct e1000_hw *hw)
+{
+	u16 status_1kbt = 0;
+	u16 receive_errors = 0;
+	s32 ret_val;
+
+	/* Read PHY Receive Error counter first, if its is max - all F's then
+	 * read the Base1000T status register If both are max then PHY is hung.
+	 */
+	ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors);
+	if (ret_val)
+		return false;
+	if (receive_errors == E1000_RECEIVE_ERROR_MAX) {
+		ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt);
+		if (ret_val)
+			return false;
+		if ((status_1kbt & E1000_IDLE_ERROR_COUNT_MASK) ==
+		    E1000_IDLE_ERROR_COUNT_MASK)
+			return true;
+	}
+
+	return false;
+}
+
+/**
+ *  e1000_setup_link_82571 - Setup flow control and link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines which flow control settings to use, then configures flow
+ *  control.  Calls the appropriate media-specific link configuration
+ *  function.  Assuming the adapter has a valid link partner, a valid link
+ *  should be established.  Assumes the hardware has previously been reset
+ *  and the transmitter and receiver are not enabled.
+ **/
+static s32 e1000_setup_link_82571(struct e1000_hw *hw)
+{
+	/* 82573 does not have a word in the NVM to determine
+	 * the default flow control setting, so we explicitly
+	 * set it to full.
+	 */
+	switch (hw->mac.type) {
+	case e1000_82573:
+	case e1000_82574:
+	case e1000_82583:
+		if (hw->fc.requested_mode == e1000_fc_default)
+			hw->fc.requested_mode = e1000_fc_full;
+		break;
+	default:
+		break;
+	}
+
+	return e1000e_setup_link_generic(hw);
+}
+
+/**
+ *  e1000_setup_copper_link_82571 - Configure copper link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the link for auto-neg or forced speed and duplex.  Then we check
+ *  for link, once link is established calls to configure collision distance
+ *  and flow control are called.
+ **/
+static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+
+	ctrl = er32(CTRL);
+	ctrl |= E1000_CTRL_SLU;
+	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	ew32(CTRL, ctrl);
+
+	switch (hw->phy.type) {
+	case e1000_phy_m88:
+	case e1000_phy_bm:
+		ret_val = e1000e_copper_link_setup_m88(hw);
+		break;
+	case e1000_phy_igp_2:
+		ret_val = e1000e_copper_link_setup_igp(hw);
+		break;
+	default:
+		return -E1000_ERR_PHY;
+	}
+
+	if (ret_val)
+		return ret_val;
+
+	return e1000e_setup_copper_link(hw);
+}
+
+/**
+ *  e1000_setup_fiber_serdes_link_82571 - Setup link for fiber/serdes
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures collision distance and flow control for fiber and serdes links.
+ *  Upon successful setup, poll for link.
+ **/
+static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
+{
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		/* If SerDes loopback mode is entered, there is no form
+		 * of reset to take the adapter out of that mode.  So we
+		 * have to explicitly take the adapter out of loopback
+		 * mode.  This prevents drivers from twiddling their thumbs
+		 * if another tool failed to take it out of loopback mode.
+		 */
+		ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+		break;
+	default:
+		break;
+	}
+
+	return e1000e_setup_fiber_serdes_link(hw);
+}
+
+/**
+ *  e1000_check_for_serdes_link_82571 - Check for link (Serdes)
+ *  @hw: pointer to the HW structure
+ *
+ *  Reports the link state as up or down.
+ *
+ *  If autonegotiation is supported by the link partner, the link state is
+ *  determined by the result of autonegotiation. This is the most likely case.
+ *  If autonegotiation is not supported by the link partner, and the link
+ *  has a valid signal, force the link up.
+ *
+ *  The link state is represented internally here by 4 states:
+ *
+ *  1) down
+ *  2) autoneg_progress
+ *  3) autoneg_complete (the link successfully autonegotiated)
+ *  4) forced_up (the link has been forced up, it did not autonegotiate)
+ *
+ **/
+static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 rxcw;
+	u32 ctrl;
+	u32 status;
+	u32 txcw;
+	u32 i;
+	s32 ret_val = 0;
+
+	ctrl = er32(CTRL);
+	status = er32(STATUS);
+	er32(RXCW);
+	/* SYNCH bit and IV bit are sticky */
+	usleep_range(10, 20);
+	rxcw = er32(RXCW);
+
+	if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
+		/* Receiver is synchronized with no invalid bits.  */
+		switch (mac->serdes_link_state) {
+		case e1000_serdes_link_autoneg_complete:
+			if (!(status & E1000_STATUS_LU)) {
+				/* We have lost link, retry autoneg before
+				 * reporting link failure
+				 */
+				mac->serdes_link_state =
+				    e1000_serdes_link_autoneg_progress;
+				mac->serdes_has_link = false;
+				e_dbg("AN_UP     -> AN_PROG\n");
+			} else {
+				mac->serdes_has_link = true;
+			}
+			break;
+
+		case e1000_serdes_link_forced_up:
+			/* If we are receiving /C/ ordered sets, re-enable
+			 * auto-negotiation in the TXCW register and disable
+			 * forced link in the Device Control register in an
+			 * attempt to auto-negotiate with our link partner.
+			 */
+			if (rxcw & E1000_RXCW_C) {
+				/* Enable autoneg, and unforce link up */
+				ew32(TXCW, mac->txcw);
+				ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+				mac->serdes_link_state =
+				    e1000_serdes_link_autoneg_progress;
+				mac->serdes_has_link = false;
+				e_dbg("FORCED_UP -> AN_PROG\n");
+			} else {
+				mac->serdes_has_link = true;
+			}
+			break;
+
+		case e1000_serdes_link_autoneg_progress:
+			if (rxcw & E1000_RXCW_C) {
+				/* We received /C/ ordered sets, meaning the
+				 * link partner has autonegotiated, and we can
+				 * trust the Link Up (LU) status bit.
+				 */
+				if (status & E1000_STATUS_LU) {
+					mac->serdes_link_state =
+					    e1000_serdes_link_autoneg_complete;
+					e_dbg("AN_PROG   -> AN_UP\n");
+					mac->serdes_has_link = true;
+				} else {
+					/* Autoneg completed, but failed. */
+					mac->serdes_link_state =
+					    e1000_serdes_link_down;
+					e_dbg("AN_PROG   -> DOWN\n");
+				}
+			} else {
+				/* The link partner did not autoneg.
+				 * Force link up and full duplex, and change
+				 * state to forced.
+				 */
+				ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
+				ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+				ew32(CTRL, ctrl);
+
+				/* Configure Flow Control after link up. */
+				ret_val = e1000e_config_fc_after_link_up(hw);
+				if (ret_val) {
+					e_dbg("Error config flow control\n");
+					break;
+				}
+				mac->serdes_link_state =
+				    e1000_serdes_link_forced_up;
+				mac->serdes_has_link = true;
+				e_dbg("AN_PROG   -> FORCED_UP\n");
+			}
+			break;
+
+		case e1000_serdes_link_down:
+		default:
+			/* The link was down but the receiver has now gained
+			 * valid sync, so lets see if we can bring the link
+			 * up.
+			 */
+			ew32(TXCW, mac->txcw);
+			ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+			mac->serdes_link_state =
+			    e1000_serdes_link_autoneg_progress;
+			mac->serdes_has_link = false;
+			e_dbg("DOWN      -> AN_PROG\n");
+			break;
+		}
+	} else {
+		if (!(rxcw & E1000_RXCW_SYNCH)) {
+			mac->serdes_has_link = false;
+			mac->serdes_link_state = e1000_serdes_link_down;
+			e_dbg("ANYSTATE  -> DOWN\n");
+		} else {
+			/* Check several times, if SYNCH bit and CONFIG
+			 * bit both are consistently 1 then simply ignore
+			 * the IV bit and restart Autoneg
+			 */
+			for (i = 0; i < AN_RETRY_COUNT; i++) {
+				usleep_range(10, 20);
+				rxcw = er32(RXCW);
+				if ((rxcw & E1000_RXCW_SYNCH) &&
+				    (rxcw & E1000_RXCW_C))
+					continue;
+
+				if (rxcw & E1000_RXCW_IV) {
+					mac->serdes_has_link = false;
+					mac->serdes_link_state =
+					    e1000_serdes_link_down;
+					e_dbg("ANYSTATE  -> DOWN\n");
+					break;
+				}
+			}
+
+			if (i == AN_RETRY_COUNT) {
+				txcw = er32(TXCW);
+				txcw |= E1000_TXCW_ANE;
+				ew32(TXCW, txcw);
+				mac->serdes_link_state =
+				    e1000_serdes_link_autoneg_progress;
+				mac->serdes_has_link = false;
+				e_dbg("ANYSTATE  -> AN_PROG\n");
+			}
+		}
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_valid_led_default_82571 - Verify a valid default LED config
+ *  @hw: pointer to the HW structure
+ *  @data: pointer to the NVM (EEPROM)
+ *
+ *  Read the EEPROM for the current default LED configuration.  If the
+ *  LED configuration is not valid, set to a valid LED configuration.
+ **/
+static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
+{
+	s32 ret_val;
+
+	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		return ret_val;
+	}
+
+	switch (hw->mac.type) {
+	case e1000_82573:
+	case e1000_82574:
+	case e1000_82583:
+		if (*data == ID_LED_RESERVED_F746)
+			*data = ID_LED_DEFAULT_82573;
+		break;
+	default:
+		if (*data == ID_LED_RESERVED_0000 ||
+		    *data == ID_LED_RESERVED_FFFF)
+			*data = ID_LED_DEFAULT;
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_get_laa_state_82571 - Get locally administered address state
+ *  @hw: pointer to the HW structure
+ *
+ *  Retrieve and return the current locally administered address state.
+ **/
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
+{
+	if (hw->mac.type != e1000_82571)
+		return false;
+
+	return hw->dev_spec.e82571.laa_is_present;
+}
+
+/**
+ *  e1000e_set_laa_state_82571 - Set locally administered address state
+ *  @hw: pointer to the HW structure
+ *  @state: enable/disable locally administered address
+ *
+ *  Enable/Disable the current locally administered address state.
+ **/
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
+{
+	if (hw->mac.type != e1000_82571)
+		return;
+
+	hw->dev_spec.e82571.laa_is_present = state;
+
+	/* If workaround is activated... */
+	if (state)
+		/* Hold a copy of the LAA in RAR[14] This is done so that
+		 * between the time RAR[0] gets clobbered and the time it
+		 * gets fixed, the actual LAA is in one of the RARs and no
+		 * incoming packets directed to this port are dropped.
+		 * Eventually the LAA will be in RAR[0] and RAR[14].
+		 */
+		hw->mac.ops.rar_set(hw, hw->mac.addr,
+				    hw->mac.rar_entry_count - 1);
+}
+
+/**
+ *  e1000_fix_nvm_checksum_82571 - Fix EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Verifies that the EEPROM has completed the update.  After updating the
+ *  EEPROM, we need to check bit 15 in work 0x23 for the checksum fix.  If
+ *  the checksum fix is not implemented, we need to set the bit and update
+ *  the checksum.  Otherwise, if bit 15 is set and the checksum is incorrect,
+ *  we need to return bad checksum.
+ **/
+static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	s32 ret_val;
+	u16 data;
+
+	if (nvm->type != e1000_nvm_flash_hw)
+		return 0;
+
+	/* Check bit 4 of word 10h.  If it is 0, firmware is done updating
+	 * 10h-12h.  Checksum may need to be fixed.
+	 */
+	ret_val = e1000_read_nvm(hw, 0x10, 1, &data);
+	if (ret_val)
+		return ret_val;
+
+	if (!(data & 0x10)) {
+		/* Read 0x23 and check bit 15.  This bit is a 1
+		 * when the checksum has already been fixed.  If
+		 * the checksum is still wrong and this bit is a
+		 * 1, we need to return bad checksum.  Otherwise,
+		 * we need to set this bit to a 1 and update the
+		 * checksum.
+		 */
+		ret_val = e1000_read_nvm(hw, 0x23, 1, &data);
+		if (ret_val)
+			return ret_val;
+
+		if (!(data & 0x8000)) {
+			data |= 0x8000;
+			ret_val = e1000_write_nvm(hw, 0x23, 1, &data);
+			if (ret_val)
+				return ret_val;
+			ret_val = e1000e_update_nvm_checksum(hw);
+			if (ret_val)
+				return ret_val;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_read_mac_addr_82571 - Read device MAC address
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
+{
+	if (hw->mac.type == e1000_82571) {
+		s32 ret_val;
+
+		/* If there's an alternate MAC address place it in RAR0
+		 * so that it will override the Si installed default perm
+		 * address.
+		 */
+		ret_val = e1000_check_alt_mac_addr_generic(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return e1000_read_mac_addr_generic(hw);
+}
+
+/**
+ * e1000_power_down_phy_copper_82571 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	struct e1000_mac_info *mac = &hw->mac;
+
+	if (!phy->ops.check_reset_block)
+		return;
+
+	/* If the management interface is not enabled, then power down */
+	if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw)))
+		e1000_power_down_phy_copper(hw);
+}
+
+/**
+ *  e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the hardware counters by reading the counter registers.
+ **/
+static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
+{
+	e1000e_clear_hw_cntrs_base(hw);
+
+	er32(PRC64);
+	er32(PRC127);
+	er32(PRC255);
+	er32(PRC511);
+	er32(PRC1023);
+	er32(PRC1522);
+	er32(PTC64);
+	er32(PTC127);
+	er32(PTC255);
+	er32(PTC511);
+	er32(PTC1023);
+	er32(PTC1522);
+
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
+
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
+
+	er32(IAC);
+	er32(ICRXOC);
+
+	er32(ICRXPTC);
+	er32(ICRXATC);
+	er32(ICTXPTC);
+	er32(ICTXATC);
+	er32(ICTXQEC);
+	er32(ICTXQMTC);
+	er32(ICRXDMTC);
+}
+
+static const struct e1000_mac_operations e82571_mac_ops = {
+	/* .check_mng_mode: mac type dependent */
+	/* .check_for_link: media type dependent */
+	.id_led_init		= e1000e_id_led_init_generic,
+	.cleanup_led		= e1000e_cleanup_led_generic,
+	.clear_hw_cntrs		= e1000_clear_hw_cntrs_82571,
+	.get_bus_info		= e1000e_get_bus_info_pcie,
+	.set_lan_id		= e1000_set_lan_id_multi_port_pcie,
+	/* .get_link_up_info: media type dependent */
+	/* .led_on: mac type dependent */
+	.led_off		= e1000e_led_off_generic,
+	.update_mc_addr_list	= e1000e_update_mc_addr_list_generic,
+	.write_vfta		= e1000_write_vfta_generic,
+	.clear_vfta		= e1000_clear_vfta_82571,
+	.reset_hw		= e1000_reset_hw_82571,
+	.init_hw		= e1000_init_hw_82571,
+	.setup_link		= e1000_setup_link_82571,
+	/* .setup_physical_interface: media type dependent */
+	.setup_led		= e1000e_setup_led_generic,
+	.config_collision_dist	= e1000e_config_collision_dist_generic,
+	.read_mac_addr		= e1000_read_mac_addr_82571,
+	.rar_set		= e1000e_rar_set_generic,
+	.rar_get_count		= e1000e_rar_get_count_generic,
+};
+
+static const struct e1000_phy_operations e82_phy_ops_igp = {
+	.acquire		= e1000_get_hw_semaphore_82571,
+	.check_polarity		= e1000_check_polarity_igp,
+	.check_reset_block	= e1000e_check_reset_block_generic,
+	.commit			= NULL,
+	.force_speed_duplex	= e1000e_phy_force_speed_duplex_igp,
+	.get_cfg_done		= e1000_get_cfg_done_82571,
+	.get_cable_length	= e1000e_get_cable_length_igp_2,
+	.get_info		= e1000e_get_phy_info_igp,
+	.read_reg		= e1000e_read_phy_reg_igp,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
+	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
+	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
+	.write_reg		= e1000e_write_phy_reg_igp,
+	.cfg_on_link_up		= NULL,
+};
+
+static const struct e1000_phy_operations e82_phy_ops_m88 = {
+	.acquire		= e1000_get_hw_semaphore_82571,
+	.check_polarity		= e1000_check_polarity_m88,
+	.check_reset_block	= e1000e_check_reset_block_generic,
+	.commit			= e1000e_phy_sw_reset,
+	.force_speed_duplex	= e1000e_phy_force_speed_duplex_m88,
+	.get_cfg_done		= e1000e_get_cfg_done_generic,
+	.get_cable_length	= e1000e_get_cable_length_m88,
+	.get_info		= e1000e_get_phy_info_m88,
+	.read_reg		= e1000e_read_phy_reg_m88,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
+	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
+	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
+	.write_reg		= e1000e_write_phy_reg_m88,
+	.cfg_on_link_up		= NULL,
+};
+
+static const struct e1000_phy_operations e82_phy_ops_bm = {
+	.acquire		= e1000_get_hw_semaphore_82571,
+	.check_polarity		= e1000_check_polarity_m88,
+	.check_reset_block	= e1000e_check_reset_block_generic,
+	.commit			= e1000e_phy_sw_reset,
+	.force_speed_duplex	= e1000e_phy_force_speed_duplex_m88,
+	.get_cfg_done		= e1000e_get_cfg_done_generic,
+	.get_cable_length	= e1000e_get_cable_length_m88,
+	.get_info		= e1000e_get_phy_info_m88,
+	.read_reg		= e1000e_read_phy_reg_bm2,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
+	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
+	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
+	.write_reg		= e1000e_write_phy_reg_bm2,
+	.cfg_on_link_up		= NULL,
+};
+
+static const struct e1000_nvm_operations e82571_nvm_ops = {
+	.acquire		= e1000_acquire_nvm_82571,
+	.read			= e1000e_read_nvm_eerd,
+	.release		= e1000_release_nvm_82571,
+	.reload			= e1000e_reload_nvm_generic,
+	.update			= e1000_update_nvm_checksum_82571,
+	.valid_led_default	= e1000_valid_led_default_82571,
+	.validate		= e1000_validate_nvm_checksum_82571,
+	.write			= e1000_write_nvm_82571,
+};
+
+const struct e1000_info e1000_82571_info = {
+	.mac			= e1000_82571,
+	.flags			= FLAG_HAS_HW_VLAN_FILTER
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_HAS_WOL
+				  | FLAG_APME_IN_CTRL3
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_SMART_POWER_DOWN
+				  | FLAG_RESET_OVERWRITES_LAA /* errata */
+				  | FLAG_TARC_SPEED_MODE_BIT /* errata */
+				  | FLAG_APME_CHECK_PORT_B,
+	.flags2			= FLAG2_DISABLE_ASPM_L1 /* errata 13 */
+				  | FLAG2_DMA_BURST,
+	.pba			= 38,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_82571,
+	.mac_ops		= &e82571_mac_ops,
+	.phy_ops		= &e82_phy_ops_igp,
+	.nvm_ops		= &e82571_nvm_ops,
+};
+
+const struct e1000_info e1000_82572_info = {
+	.mac			= e1000_82572,
+	.flags			= FLAG_HAS_HW_VLAN_FILTER
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_HAS_WOL
+				  | FLAG_APME_IN_CTRL3
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_TARC_SPEED_MODE_BIT, /* errata */
+	.flags2			= FLAG2_DISABLE_ASPM_L1 /* errata 13 */
+				  | FLAG2_DMA_BURST,
+	.pba			= 38,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_82571,
+	.mac_ops		= &e82571_mac_ops,
+	.phy_ops		= &e82_phy_ops_igp,
+	.nvm_ops		= &e82571_nvm_ops,
+};
+
+const struct e1000_info e1000_82573_info = {
+	.mac			= e1000_82573,
+	.flags			= FLAG_HAS_HW_VLAN_FILTER
+				  | FLAG_HAS_WOL
+				  | FLAG_APME_IN_CTRL3
+				  | FLAG_HAS_SMART_POWER_DOWN
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_SWSM_ON_LOAD,
+	.flags2			= FLAG2_DISABLE_ASPM_L1
+				  | FLAG2_DISABLE_ASPM_L0S,
+	.pba			= 20,
+	.max_hw_frame_size	= VLAN_ETH_FRAME_LEN + ETH_FCS_LEN,
+	.get_variants		= e1000_get_variants_82571,
+	.mac_ops		= &e82571_mac_ops,
+	.phy_ops		= &e82_phy_ops_m88,
+	.nvm_ops		= &e82571_nvm_ops,
+};
+
+const struct e1000_info e1000_82574_info = {
+	.mac			= e1000_82574,
+	.flags			= FLAG_HAS_HW_VLAN_FILTER
+				  | FLAG_HAS_MSIX
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_HW_TIMESTAMP
+				  | FLAG_APME_IN_CTRL3
+				  | FLAG_HAS_SMART_POWER_DOWN
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_CTRLEXT_ON_LOAD,
+	.flags2			 = FLAG2_CHECK_PHY_HANG
+				  | FLAG2_DISABLE_ASPM_L0S
+				  | FLAG2_DISABLE_ASPM_L1
+				  | FLAG2_NO_DISABLE_RX
+				  | FLAG2_DMA_BURST,
+	.pba			= 32,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_82571,
+	.mac_ops		= &e82571_mac_ops,
+	.phy_ops		= &e82_phy_ops_bm,
+	.nvm_ops		= &e82571_nvm_ops,
+};
+
+const struct e1000_info e1000_82583_info = {
+	.mac			= e1000_82583,
+	.flags			= FLAG_HAS_HW_VLAN_FILTER
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_HW_TIMESTAMP
+				  | FLAG_APME_IN_CTRL3
+				  | FLAG_HAS_SMART_POWER_DOWN
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_HAS_CTRLEXT_ON_LOAD,
+	.flags2			= FLAG2_DISABLE_ASPM_L0S
+				  | FLAG2_DISABLE_ASPM_L1
+				  | FLAG2_NO_DISABLE_RX,
+	.pba			= 32,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_82571,
+	.mac_ops		= &e82571_mac_ops,
+	.phy_ops		= &e82_phy_ops_bm,
+	.nvm_ops		= &e82571_nvm_ops,
+};
diff --git a/drivers/net/ethernet/intel/e1000e/82571.h b/drivers/net/ethernet/intel/e1000e/82571.h
new file mode 100644
index 000000000..2e758f796
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/82571.h
@@ -0,0 +1,53 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000E_82571_H_
+#define _E1000E_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5	/* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574	0x000DC	/* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574	0x01F00000
+
+#define E1000_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define E1000_BASE1000T_STATUS		10
+#define E1000_IDLE_ERROR_COUNT_MASK	0xFF
+#define E1000_RECEIVE_ERROR_COUNTER	21
+#define E1000_RECEIVE_ERROR_MAX		0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif
diff --git a/drivers/net/ethernet/intel/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile
new file mode 100644
index 000000000..106de4933
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/Makefile
@@ -0,0 +1,37 @@
+################################################################################
+#
+# Intel PRO/1000 Linux driver
+# Copyright(c) 1999 - 2014 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# Linux NICS <linux.nics@intel.com>
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) PRO/1000 ethernet driver
+#
+
+obj-$(CONFIG_E1000E) += e1000e.o
+
+e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \
+	       mac.o manage.o nvm.o phy.o \
+	       param.o ethtool.o netdev.o ptp.o
+
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
new file mode 100644
index 000000000..0570c668e
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -0,0 +1,800 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_DEFINES_H_
+#define _E1000_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE  8
+#define REQ_RX_DESCRIPTOR_MULTIPLE  8
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_APME		0x00000001	/* APM Enable */
+#define E1000_WUC_PME_EN	0x00000002	/* PME Enable */
+#define E1000_WUC_PME_STATUS	0x00000004	/* PME Status */
+#define E1000_WUC_APMPME	0x00000008	/* Assert PME on APM Wakeup */
+#define E1000_WUC_PHY_WAKE	0x00000100	/* if PHY supports wakeup */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG  0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC   0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */
+
+/* Wake Up Status */
+#define E1000_WUS_LNKC         E1000_WUFC_LNKC
+#define E1000_WUS_MAG          E1000_WUFC_MAG
+#define E1000_WUS_EX           E1000_WUFC_EX
+#define E1000_WUS_MC           E1000_WUFC_MC
+#define E1000_WUS_BC           E1000_WUFC_BC
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_LPCD  0x00000004     /* LCD Power Cycle Done */
+#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Definable Pin 3 */
+#define E1000_CTRL_EXT_FORCE_SMBUS 0x00000800 /* Force SMBus mode */
+#define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_SPD_BYPS  0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS    0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES  0x00C00000
+#define E1000_CTRL_EXT_EIAME          0x01000000
+#define E1000_CTRL_EXT_DRV_LOAD       0x10000000 /* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_IAME		0x08000000 /* Int ACK Auto-mask */
+#define E1000_CTRL_EXT_PBA_CLR        0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_LSECCK         0x00001000
+#define E1000_CTRL_EXT_PHYPDEN        0x00100000
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
+#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
+#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
+#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
+#define E1000_RXD_ERR_CE        0x01    /* CRC Error */
+#define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
+#define E1000_RXD_ERR_SEQ       0x04    /* Sequence Error */
+#define E1000_RXD_ERR_CXE       0x10    /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE      0x20    /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE       0x40    /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE       0x80    /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
+
+#define E1000_RXDEXT_STATERR_TST   0x00000100	/* Time Stamp taken */
+#define E1000_RXDEXT_STATERR_CE    0x01000000
+#define E1000_RXDEXT_STATERR_SE    0x02000000
+#define E1000_RXDEXT_STATERR_SEQ   0x04000000
+#define E1000_RXDEXT_STATERR_CXE   0x10000000
+#define E1000_RXDEXT_STATERR_RXE   0x80000000
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
+	E1000_RXD_ERR_CE  |		\
+	E1000_RXD_ERR_SE  |		\
+	E1000_RXD_ERR_SEQ |		\
+	E1000_RXD_ERR_CXE |		\
+	E1000_RXD_ERR_RXE)
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+	E1000_RXDEXT_STATERR_CE  |	\
+	E1000_RXDEXT_STATERR_SE  |	\
+	E1000_RXDEXT_STATERR_SEQ |	\
+	E1000_RXDEXT_STATERR_CXE |	\
+	E1000_RXDEXT_STATERR_RXE)
+
+#define E1000_MRQC_RSS_FIELD_MASK              0xFFFF0000
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP          0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4              0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX       0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6              0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP          0x00200000
+
+#define E1000_RXDPS_HDRSTAT_HDRSP              0x00008000
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN      0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN        0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_ARP_EN        0x00002000 /* Enable ARP Request Filtering */
+#define E1000_MANC_RCV_TCO_EN    0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE   0x00040000 /* Block phy resets */
+/* Enable MAC address filtering */
+#define E1000_MANC_EN_MAC_ADDR_FILTER   0x00100000
+/* Enable MNG packets to host memory */
+#define E1000_MANC_EN_MNG2HOST   0x00200000
+
+#define E1000_MANC2H_PORT_623    0x00000020 /* Port 0x26f */
+#define E1000_MANC2H_PORT_664    0x00000040 /* Port 0x298 */
+#define E1000_MDEF_PORT_623      0x00000800 /* Port 0x26f */
+#define E1000_MDEF_PORT_664      0x00000400 /* Port 0x298 */
+
+/* Receive Control */
+#define E1000_RCTL_EN             0x00000002    /* enable */
+#define E1000_RCTL_SBP            0x00000004    /* store bad packet */
+#define E1000_RCTL_UPE            0x00000008    /* unicast promiscuous enable */
+#define E1000_RCTL_MPE            0x00000010    /* multicast promiscuous enab */
+#define E1000_RCTL_LPE            0x00000020    /* long packet enable */
+#define E1000_RCTL_LBM_NO         0x00000000    /* no loopback mode */
+#define E1000_RCTL_LBM_MAC        0x00000040    /* MAC loopback mode */
+#define E1000_RCTL_LBM_TCVR       0x000000C0    /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_PS        0x00000400    /* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF     0x00000000    /* Rx desc min threshold size */
+#define E1000_RCTL_RDMTS_HEX      0x00010000
+#define E1000_RCTL_MO_SHIFT       12            /* multicast offset shift */
+#define E1000_RCTL_MO_3           0x00003000    /* multicast offset 15:4 */
+#define E1000_RCTL_BAM            0x00008000    /* broadcast enable */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
+#define E1000_RCTL_SZ_2048        0x00000000    /* Rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024        0x00010000    /* Rx buffer size 1024 */
+#define E1000_RCTL_SZ_512         0x00020000    /* Rx buffer size 512 */
+#define E1000_RCTL_SZ_256         0x00030000    /* Rx buffer size 256 */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
+#define E1000_RCTL_SZ_16384       0x00010000    /* Rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192        0x00020000    /* Rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096        0x00030000    /* Rx buffer size 4096 */
+#define E1000_RCTL_VFE            0x00040000    /* vlan filter enable */
+#define E1000_RCTL_CFIEN          0x00080000    /* canonical form enable */
+#define E1000_RCTL_CFI            0x00100000    /* canonical form indicator */
+#define E1000_RCTL_DPF            0x00400000    /* Discard Pause Frames */
+#define E1000_RCTL_PMCF           0x00800000    /* pass MAC control frames */
+#define E1000_RCTL_BSEX           0x02000000    /* Buffer size extension */
+#define E1000_RCTL_SECRC          0x04000000    /* Strip Ethernet CRC */
+
+/* Use byte values for the following shift parameters
+ * Usage:
+ *     psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ *                  E1000_PSRCTL_BSIZE0_MASK) |
+ *                ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ *                  E1000_PSRCTL_BSIZE1_MASK) |
+ *                ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ *                  E1000_PSRCTL_BSIZE2_MASK) |
+ *                ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ *                  E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256],  default=256
+ *       value1 = [1024..64512], default=4096
+ *       value2 = [0..64512],    default=4096
+ *       value3 = [0..64512],    default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK   0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK   0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK   0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK   0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT  7            /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT  2            /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT  6            /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14            /* Shift _left_ 14 */
+
+/* SWFW_SYNC Definitions */
+#define E1000_SWFW_EEP_SM   0x1
+#define E1000_SWFW_PHY0_SM  0x2
+#define E1000_SWFW_PHY1_SM  0x4
+#define E1000_SWFW_CSR_SM   0x8
+
+/* Device Control */
+#define E1000_CTRL_FD       0x00000001  /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST     0x00000008  /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_ASDE     0x00000020  /* Auto-speed detect enable */
+#define E1000_CTRL_SLU      0x00000040  /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS     0x00000080  /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL  0x00000300  /* Speed Select Mask */
+#define E1000_CTRL_SPD_10   0x00000000  /* Force 10Mb */
+#define E1000_CTRL_SPD_100  0x00000100  /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200  /* Force 1Gb */
+#define E1000_CTRL_FRCSPD   0x00000800  /* Force Speed */
+#define E1000_CTRL_FRCDPX   0x00001000  /* Force Duplex */
+#define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */
+#define E1000_CTRL_LANPHYPC_VALUE    0x00020000 /* SW value of LANPHYPC */
+#define E1000_CTRL_MEHE     0x00080000  /* Memory Error Handling Enable */
+#define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
+#define E1000_CTRL_ADVD3WUC 0x00100000  /* D3 WUC */
+#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */
+#define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */
+#define E1000_CTRL_RST      0x04000000  /* Global reset */
+#define E1000_CTRL_RFCE     0x08000000  /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE     0x10000000  /* Transmit flow control enable */
+#define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */
+
+#define E1000_PCS_LCTL_FORCE_FCTRL	0x80
+
+#define E1000_PCS_LSTS_AN_COMPLETE	0x10000
+
+/* Device Status */
+#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK  0x0000000C      /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_1     0x00000004      /* Function 1 */
+#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
+#define E1000_STATUS_SPEED_MASK 0x000000C0
+#define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion by NVM */
+#define E1000_STATUS_PHYRA      0x00000400      /* PHY Reset Asserted */
+#define E1000_STATUS_GIO_MASTER_ENABLE	0x00080000	/* Master Req status */
+
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+#define ADVERTISE_10_HALF                 0x0001
+#define ADVERTISE_10_FULL                 0x0002
+#define ADVERTISE_100_HALF                0x0004
+#define ADVERTISE_100_FULL                0x0008
+#define ADVERTISE_1000_HALF               0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL               0x0020
+
+/* 1000/H is not supported, nor spec-compliant. */
+#define E1000_ALL_SPEED_DUPLEX	( \
+	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+	ADVERTISE_100_FULL | ADVERTISE_1000_FULL)
+#define E1000_ALL_NOT_GIG	( \
+	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+	ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED	(ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED	(ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define E1000_ALL_HALF_DUPLEX	(ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT   E1000_ALL_SPEED_DUPLEX
+
+/* LED Control */
+#define E1000_PHY_LED0_MODE_MASK          0x00000007
+#define E1000_PHY_LED0_IVRT               0x00000008
+#define E1000_PHY_LED0_MASK               0x0000001F
+
+#define E1000_LEDCTL_LED0_MODE_MASK       0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT      0
+#define E1000_LEDCTL_LED0_IVRT            0x00000040
+#define E1000_LEDCTL_LED0_BLINK           0x00000080
+
+#define E1000_LEDCTL_MODE_LINK_UP       0x2
+#define E1000_LEDCTL_MODE_LED_ON        0xE
+#define E1000_LEDCTL_MODE_LED_OFF       0xF
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_DTYP_D     0x00100000 /* Data Descriptor */
+#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP    0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC     0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS     0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS    0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE    0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE    0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC    0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC    0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU    0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP    0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP     0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE    0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC    0x00000004 /* Tx Underrun */
+#define E1000_TXD_EXTCMD_TSTAMP	0x00000010 /* IEEE1588 Timestamp packet */
+
+/* Transmit Control */
+#define E1000_TCTL_EN     0x00000002    /* enable Tx */
+#define E1000_TCTL_PSP    0x00000008    /* pad short packets */
+#define E1000_TCTL_CT     0x00000ff0    /* collision threshold */
+#define E1000_TCTL_COLD   0x003ff000    /* collision distance */
+#define E1000_TCTL_RTLC   0x01000000    /* Re-transmit on late collision */
+#define E1000_TCTL_MULR   0x10000000    /* Multiple request support */
+
+/* SerDes Control */
+#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
+#define E1000_SCTL_ENABLE_SERDES_LOOPBACK	0x0410
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_TUOFL     0x00000200   /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPPCSE    0x00001000   /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD      0x00002000   /* packet checksum disabled */
+
+/* Header split receive */
+#define E1000_RFCTL_NFSW_DIS            0x00000040
+#define E1000_RFCTL_NFSR_DIS            0x00000080
+#define E1000_RFCTL_ACK_DIS             0x00001000
+#define E1000_RFCTL_EXTEN               0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS         0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS    0x00020000
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD       15
+#define E1000_CT_SHIFT                  4
+#define E1000_COLLISION_DISTANCE        63
+#define E1000_COLD_SHIFT                12
+
+/* Default values for the transmit IPG register */
+#define DEFAULT_82543_TIPG_IPGT_COPPER 8
+
+#define E1000_TIPG_IPGT_MASK  0x000003FF
+
+#define DEFAULT_82543_TIPG_IPGR1 8
+#define E1000_TIPG_IPGR1_SHIFT  10
+
+#define DEFAULT_82543_TIPG_IPGR2 6
+#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
+#define E1000_TIPG_IPGR2_SHIFT  20
+
+#define MAX_JUMBO_FRAME_SIZE    0x3F00
+#define E1000_TX_PTR_GAP		0x1F
+
+/* Extended Configuration Control and Size */
+#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP      0x00000020
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE       0x00000001
+#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE       0x00000008
+#define E1000_EXTCNF_CTRL_SWFLAG                 0x00000020
+#define E1000_EXTCNF_CTRL_GATE_PHY_CFG           0x00000080
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK   0x00FF0000
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT          16
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK   0x0FFF0000
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT          16
+
+#define E1000_PHY_CTRL_D0A_LPLU           0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU        0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE        0x00000040
+
+#define E1000_KABGTXD_BGSQLBIAS           0x00050000
+
+/* Low Power IDLE Control */
+#define E1000_LPIC_LPIET_SHIFT		24	/* Low Power Idle Entry Time */
+
+/* PBA constants */
+#define E1000_PBA_8K  0x0008    /* 8KB */
+#define E1000_PBA_16K 0x0010    /* 16KB */
+
+#define E1000_PBA_RXA_MASK	0xFFFF
+
+#define E1000_PBS_16K E1000_PBA_16K
+
+/* Uncorrectable/correctable ECC Error counts and enable bits */
+#define E1000_PBECCSTS_CORR_ERR_CNT_MASK	0x000000FF
+#define E1000_PBECCSTS_UNCORR_ERR_CNT_MASK	0x0000FF00
+#define E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT	8
+#define E1000_PBECCSTS_ECC_ENABLE		0x00010000
+
+#define IFS_MAX       80
+#define IFS_MIN       40
+#define IFS_RATIO     4
+#define IFS_STEP      10
+#define MIN_NUM_XMITS 1000
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI         0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI      0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_DRV_LOAD     0x00000008 /* Driver Loaded Bit */
+
+#define E1000_SWSM2_LOCK        0x00000002 /* Secondary driver semaphore bit */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW          0x00000001 /* Transmit desc written back */
+#define E1000_ICR_LSC           0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ         0x00000008 /* Rx sequence error */
+#define E1000_ICR_RXDMT0        0x00000010 /* Rx desc min. threshold (0) */
+#define E1000_ICR_RXT0          0x00000080 /* Rx timer intr (ring 0) */
+#define E1000_ICR_ECCER         0x00400000 /* Uncorrectable ECC Error */
+/* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED	0x80000000
+#define E1000_ICR_RXQ0          0x00100000 /* Rx Queue 0 Interrupt */
+#define E1000_ICR_RXQ1          0x00200000 /* Rx Queue 1 Interrupt */
+#define E1000_ICR_TXQ0          0x00400000 /* Tx Queue 0 Interrupt */
+#define E1000_ICR_TXQ1          0x00800000 /* Tx Queue 1 Interrupt */
+#define E1000_ICR_OTHER         0x01000000 /* Other Interrupts */
+
+/* PBA ECC Register */
+#define E1000_PBA_ECC_COUNTER_MASK  0xFFF00000 /* ECC counter mask */
+#define E1000_PBA_ECC_COUNTER_SHIFT 20         /* ECC counter shift value */
+#define E1000_PBA_ECC_CORR_EN       0x00000001 /* ECC correction enable */
+#define E1000_PBA_ECC_STAT_CLR      0x00000002 /* Clear ECC error counter */
+#define E1000_PBA_ECC_INT_EN        0x00000004 /* Enable ICR bit 5 for ECC */
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register.  Each bit is documented below:
+ *   o RXT0   = Receiver Timer Interrupt (ring 0)
+ *   o TXDW   = Transmit Descriptor Written Back
+ *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ *   o RXSEQ  = Receive Sequence Error
+ *   o LSC    = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+	E1000_IMS_RXT0   |    \
+	E1000_IMS_TXDW   |    \
+	E1000_IMS_RXDMT0 |    \
+	E1000_IMS_RXSEQ  |    \
+	E1000_IMS_LSC)
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
+#define E1000_IMS_LSC       E1000_ICR_LSC       /* Link Status Change */
+#define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */
+#define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */
+#define E1000_IMS_RXT0      E1000_ICR_RXT0      /* Rx timer intr */
+#define E1000_IMS_ECCER     E1000_ICR_ECCER     /* Uncorrectable ECC Error */
+#define E1000_IMS_RXQ0      E1000_ICR_RXQ0      /* Rx Queue 0 Interrupt */
+#define E1000_IMS_RXQ1      E1000_ICR_RXQ1      /* Rx Queue 1 Interrupt */
+#define E1000_IMS_TXQ0      E1000_ICR_TXQ0      /* Tx Queue 0 Interrupt */
+#define E1000_IMS_TXQ1      E1000_ICR_TXQ1      /* Tx Queue 1 Interrupt */
+#define E1000_IMS_OTHER     E1000_ICR_OTHER     /* Other Interrupts */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_LSC       E1000_ICR_LSC       /* Link Status Change */
+#define E1000_ICS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */
+#define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */
+
+/* Transmit Descriptor Control */
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN    0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
+/* Enable the counting of desc. still to be processed. */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW  0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE         0x8808
+
+/* 802.1q VLAN Packet Size */
+#define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots.  However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define E1000_RAR_ENTRIES     15
+#define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN 4
+#define E1000_RAH_MAC_ADDR_LEN 2
+
+/* Error Codes */
+#define E1000_ERR_NVM      1
+#define E1000_ERR_PHY      2
+#define E1000_ERR_CONFIG   3
+#define E1000_ERR_PARAM    4
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_PHY_TYPE 6
+#define E1000_ERR_RESET   9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET   12
+#define E1000_ERR_SWFW_SYNC 13
+#define E1000_NOT_IMPLEMENTED 14
+#define E1000_ERR_INVALID_ARGUMENT  16
+#define E1000_ERR_NO_SPACE          17
+#define E1000_ERR_NVM_PBA_SECTION   18
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define FIBER_LINK_UP_LIMIT               50
+#define COPPER_LINK_UP_LIMIT              10
+#define PHY_AUTO_NEG_LIMIT                45
+#define PHY_FORCE_LIMIT                   20
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT      800
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT             100
+/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
+#define MDIO_OWNERSHIP_TIMEOUT      10
+/* Number of milliseconds for NVM auto read done after MAC reset. */
+#define AUTO_READ_DONE_TIMEOUT      10
+
+/* Flow Control */
+#define E1000_FCRTH_RTH  0x0000FFF8     /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTL_RTL  0x0000FFF8     /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */
+
+/* Transmit Configuration Word */
+#define E1000_TXCW_FD         0x00000020        /* TXCW full duplex */
+#define E1000_TXCW_PAUSE      0x00000080        /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR    0x00000100        /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180        /* TXCW pause request mask */
+#define E1000_TXCW_ANE        0x80000000        /* Auto-neg enable */
+
+/* Receive Configuration Word */
+#define E1000_RXCW_CW         0x0000ffff        /* RxConfigWord mask */
+#define E1000_RXCW_IV         0x08000000        /* Receive config invalid */
+#define E1000_RXCW_C          0x20000000        /* Receive config */
+#define E1000_RXCW_SYNCH      0x40000000        /* Receive config synch */
+
+#define E1000_TSYNCTXCTL_VALID		0x00000001 /* Tx timestamp valid */
+#define E1000_TSYNCTXCTL_ENABLED	0x00000010 /* enable Tx timestamping */
+
+#define E1000_TSYNCRXCTL_VALID		0x00000001 /* Rx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_MASK	0x0000000E /* Rx type mask */
+#define E1000_TSYNCRXCTL_TYPE_L2_V2	0x00
+#define E1000_TSYNCRXCTL_TYPE_L4_V1	0x02
+#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2	0x04
+#define E1000_TSYNCRXCTL_TYPE_ALL	0x08
+#define E1000_TSYNCRXCTL_TYPE_EVENT_V2	0x0A
+#define E1000_TSYNCRXCTL_ENABLED	0x00000010 /* enable Rx timestamping */
+#define E1000_TSYNCRXCTL_SYSCFI		0x00000020 /* Sys clock frequency */
+
+#define E1000_RXMTRL_PTP_V1_SYNC_MESSAGE	0x00000000
+#define E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE	0x00010000
+
+#define E1000_RXMTRL_PTP_V2_SYNC_MESSAGE	0x00000000
+#define E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE	0x01000000
+
+#define E1000_TIMINCA_INCPERIOD_SHIFT	24
+#define E1000_TIMINCA_INCVALUE_MASK	0x00FFFFFF
+
+/* PCI Express Control */
+#define E1000_GCR_RXD_NO_SNOOP          0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP       0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP       0x00000004
+#define E1000_GCR_TXD_NO_SNOOP          0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP       0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP       0x00000020
+
+#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP         | \
+			   E1000_GCR_RXDSCW_NO_SNOOP      | \
+			   E1000_GCR_RXDSCR_NO_SNOOP      | \
+			   E1000_GCR_TXD_NO_SNOOP         | \
+			   E1000_GCR_TXDSCW_NO_SNOOP      | \
+			   E1000_GCR_TXDSCR_NO_SNOOP)
+
+/* NVM Control */
+#define E1000_EECD_SK        0x00000001 /* NVM Clock */
+#define E1000_EECD_CS        0x00000002 /* NVM Chip Select */
+#define E1000_EECD_DI        0x00000004 /* NVM Data In */
+#define E1000_EECD_DO        0x00000008 /* NVM Data Out */
+#define E1000_EECD_REQ       0x00000040 /* NVM Access Request */
+#define E1000_EECD_GNT       0x00000080 /* NVM Access Grant */
+#define E1000_EECD_PRES      0x00000100 /* NVM Present */
+#define E1000_EECD_SIZE      0x00000200 /* NVM Size (0=64 word 1=256 word) */
+/* NVM Addressing bits based on type (0-small, 1-large) */
+#define E1000_EECD_ADDR_BITS 0x00000400
+#define E1000_NVM_GRANT_ATTEMPTS   1000 /* NVM # attempts to gain grant */
+#define E1000_EECD_AUTO_RD          0x00000200  /* NVM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK     0x00007800  /* NVM Size */
+#define E1000_EECD_SIZE_EX_SHIFT     11
+#define E1000_EECD_FLUPD     0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN    0x00100000 /* Enable Autonomous FLASH update */
+#define E1000_EECD_SEC1VAL   0x00400000 /* Sector One Valid */
+#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
+
+#define E1000_NVM_RW_REG_DATA	16	/* Offset to data in NVM r/w regs */
+#define E1000_NVM_RW_REG_DONE	2	/* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START	1	/* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT	2	/* Shift to the address bits */
+#define E1000_NVM_POLL_WRITE	1	/* Flag for polling write complete */
+#define E1000_NVM_POLL_READ	0	/* Flag for polling read complete */
+#define E1000_FLASH_UPDATES	2000
+
+/* NVM Word Offsets */
+#define NVM_COMPAT                 0x0003
+#define NVM_ID_LED_SETTINGS        0x0004
+#define NVM_FUTURE_INIT_WORD1      0x0019
+#define NVM_COMPAT_VALID_CSUM      0x0001
+#define NVM_FUTURE_INIT_WORD1_VALID_CSUM	0x0040
+
+#define NVM_INIT_CONTROL2_REG      0x000F
+#define NVM_INIT_CONTROL3_PORT_B   0x0014
+#define NVM_INIT_3GIO_3            0x001A
+#define NVM_INIT_CONTROL3_PORT_A   0x0024
+#define NVM_CFG                    0x0012
+#define NVM_ALT_MAC_ADDR_PTR       0x0037
+#define NVM_CHECKSUM_REG           0x003F
+
+#define E1000_NVM_CFG_DONE_PORT_0  0x40000 /* MNG config cycle done */
+#define E1000_NVM_CFG_DONE_PORT_1  0x80000 /* ...for second port */
+
+/* Mask bits for fields in Word 0x0f of the NVM */
+#define NVM_WORD0F_PAUSE_MASK       0x3000
+#define NVM_WORD0F_PAUSE            0x1000
+#define NVM_WORD0F_ASM_DIR          0x2000
+
+/* Mask bits for fields in Word 0x1a of the NVM */
+#define NVM_WORD1A_ASPM_MASK  0x000C
+
+/* Mask bits for fields in Word 0x03 of the EEPROM */
+#define NVM_COMPAT_LOM    0x0800
+
+/* length of string needed to store PBA number */
+#define E1000_PBANUM_LENGTH             11
+
+/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
+#define NVM_SUM                    0xBABA
+
+/* PBA (printed board assembly) number words */
+#define NVM_PBA_OFFSET_0           8
+#define NVM_PBA_OFFSET_1           9
+#define NVM_PBA_PTR_GUARD          0xFAFA
+#define NVM_WORD_SIZE_BASE_SHIFT   6
+
+/* NVM Commands - SPI */
+#define NVM_MAX_RETRY_SPI          5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_READ_OPCODE_SPI        0x03 /* NVM read opcode */
+#define NVM_WRITE_OPCODE_SPI       0x02 /* NVM write opcode */
+#define NVM_A8_OPCODE_SPI          0x08 /* opcode bit-3 = address bit-8 */
+#define NVM_WREN_OPCODE_SPI        0x06 /* NVM set Write Enable latch */
+#define NVM_RDSR_OPCODE_SPI        0x05 /* NVM read Status register */
+
+/* SPI NVM Status Register */
+#define NVM_STATUS_RDY_SPI         0x01
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2  << 12) | \
+			      (ID_LED_OFF1_OFF2 <<  8) | \
+			      (ID_LED_DEF1_DEF2 <<  4) | \
+			      (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2     0x1
+#define ID_LED_DEF1_ON2      0x2
+#define ID_LED_DEF1_OFF2     0x3
+#define ID_LED_ON1_DEF2      0x4
+#define ID_LED_ON1_ON2       0x5
+#define ID_LED_ON1_OFF2      0x6
+#define ID_LED_OFF1_DEF2     0x7
+#define ID_LED_OFF1_ON2      0x8
+#define ID_LED_OFF1_OFF2     0x9
+
+#define IGP_ACTIVITY_LED_MASK   0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE           0x07000000
+
+/* PCI/PCI-X/PCI-EX Config space */
+#define PCI_HEADER_TYPE_REGISTER     0x0E
+#define PCIE_LINK_STATUS             0x12
+
+#define PCI_HEADER_TYPE_MULTIFUNC    0x80
+#define PCIE_LINK_WIDTH_MASK         0x3F0
+#define PCIE_LINK_WIDTH_SHIFT        4
+
+#define PHY_REVISION_MASK      0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS    0x1F  /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF
+
+/* Bit definitions for valid PHY IDs.
+ * I = Integrated
+ * E = External
+ */
+#define M88E1000_E_PHY_ID    0x01410C50
+#define M88E1000_I_PHY_ID    0x01410C30
+#define M88E1011_I_PHY_ID    0x01410C20
+#define IGP01E1000_I_PHY_ID  0x02A80380
+#define M88E1111_I_PHY_ID    0x01410CC0
+#define GG82563_E_PHY_ID     0x01410CA0
+#define IGP03E1000_E_PHY_ID  0x02A80390
+#define IFE_E_PHY_ID         0x02A80330
+#define IFE_PLUS_E_PHY_ID    0x02A80320
+#define IFE_C_E_PHY_ID       0x02A80310
+#define BME1000_E_PHY_ID     0x01410CB0
+#define BME1000_E_PHY_ID_R2  0x01410CB1
+#define I82577_E_PHY_ID      0x01540050
+#define I82578_E_PHY_ID      0x004DD040
+#define I82579_E_PHY_ID      0x01540090
+#define I217_E_PHY_ID        0x015400A0
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS   0x11  /* PHY Specific Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14  /* Extended PHY Specific Control */
+
+#define M88E1000_PHY_PAGE_SELECT   0x1D  /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL   0x1E  /* Its meaning depends on reg 29 */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+#define M88E1000_PSCR_MDI_MANUAL_MODE  0x0000  /* MDI Crossover Mode bits 6:5 */
+					       /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020  /* Manual MDIX configuration */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88E1000_PSCR_AUTO_X_1000T     0x0040
+/* Auto crossover enabled all speeds */
+#define M88E1000_PSCR_AUTO_X_MODE      0x0060
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_REV_POLARITY       0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT          0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX               0x0040 /* 1=MDIX; 0=MDI */
+/* 0=<50M; 1=50-80M; 2=80-110M; 3=110-140M; 4=>140M */
+#define M88E1000_PSSR_CABLE_LENGTH       0x0380
+#define M88E1000_PSSR_SPEED              0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_1000MBS            0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X   0x0000
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave
+ */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK  0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X    0x0100
+#define M88E1000_EPSCR_TX_CLK_25      0x0070 /* 25  MHz TX_CLK */
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X    0x0800
+
+#define I82578_EPSCR_DOWNSHIFT_ENABLE          0x0020
+#define I82578_EPSCR_DOWNSHIFT_COUNTER_MASK    0x001C
+
+/* BME1000 PHY Specific Control Register */
+#define BME1000_PSCR_ENABLE_DOWNSHIFT   0x0800 /* 1 = enable downshift */
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define GG82563_PAGE_SHIFT        5
+#define GG82563_REG(page, reg)    \
+	(((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+#define GG82563_MIN_ALT_REG       30
+
+/* GG82563 Specific Registers */
+#define GG82563_PHY_SPEC_CTRL           \
+	GG82563_REG(0, 16) /* PHY Specific Control */
+#define GG82563_PHY_PAGE_SELECT         \
+	GG82563_REG(0, 22) /* Page Select */
+#define GG82563_PHY_SPEC_CTRL_2         \
+	GG82563_REG(0, 26) /* PHY Specific Control 2 */
+#define GG82563_PHY_PAGE_SELECT_ALT     \
+	GG82563_REG(0, 29) /* Alternate Page Select */
+
+#define GG82563_PHY_MAC_SPEC_CTRL       \
+	GG82563_REG(2, 21) /* MAC Specific Control Register */
+
+#define GG82563_PHY_DSP_DISTANCE    \
+	GG82563_REG(5, 26) /* DSP Distance */
+
+/* Page 193 - Port Control Registers */
+#define GG82563_PHY_KMRN_MODE_CTRL   \
+	GG82563_REG(193, 16) /* Kumeran Mode Control */
+#define GG82563_PHY_PWR_MGMT_CTRL       \
+	GG82563_REG(193, 20) /* Power Management Control */
+
+/* Page 194 - KMRN Registers */
+#define GG82563_PHY_INBAND_CTRL         \
+	GG82563_REG(194, 18) /* Inband Control */
+
+/* MDI Control */
+#define E1000_MDIC_REG_MASK	0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE  0x04000000
+#define E1000_MDIC_OP_READ   0x08000000
+#define E1000_MDIC_READY     0x10000000
+#define E1000_MDIC_ERROR     0x40000000
+
+/* SerDes Control */
+#define E1000_GEN_POLL_TIMEOUT          640
+
+#endif /* _E1000_DEFINES_H_ */
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
new file mode 100644
index 000000000..0abc942c9
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -0,0 +1,595 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _E1000_H_
+#define _E1000_H_
+
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/crc32.h>
+#include <linux/if_vlan.h>
+#include <linux/timecounter.h>
+#include <linux/net_tstamp.h>
+#include <linux/ptp_clock_kernel.h>
+#include <linux/ptp_classify.h>
+#include <linux/mii.h>
+#include <linux/mdio.h>
+#include <linux/pm_qos.h>
+#include "hw.h"
+
+struct e1000_info;
+
+#define e_dbg(format, arg...) \
+	netdev_dbg(hw->adapter->netdev, format, ## arg)
+#define e_err(format, arg...) \
+	netdev_err(adapter->netdev, format, ## arg)
+#define e_info(format, arg...) \
+	netdev_info(adapter->netdev, format, ## arg)
+#define e_warn(format, arg...) \
+	netdev_warn(adapter->netdev, format, ## arg)
+#define e_notice(format, arg...) \
+	netdev_notice(adapter->netdev, format, ## arg)
+
+/* Interrupt modes, as used by the IntMode parameter */
+#define E1000E_INT_MODE_LEGACY		0
+#define E1000E_INT_MODE_MSI		1
+#define E1000E_INT_MODE_MSIX		2
+
+/* Tx/Rx descriptor defines */
+#define E1000_DEFAULT_TXD		256
+#define E1000_MAX_TXD			4096
+#define E1000_MIN_TXD			64
+
+#define E1000_DEFAULT_RXD		256
+#define E1000_MAX_RXD			4096
+#define E1000_MIN_RXD			64
+
+#define E1000_MIN_ITR_USECS		10 /* 100000 irq/sec */
+#define E1000_MAX_ITR_USECS		10000 /* 100    irq/sec */
+
+#define E1000_FC_PAUSE_TIME		0x0680 /* 858 usec */
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define E1000_RX_BUFFER_WRITE		16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES			0
+#define E1000_EEPROM_APME		0x0400
+
+#define E1000_MNG_VLAN_NONE		(-1)
+
+#define DEFAULT_JUMBO			9234
+
+/* Time to wait before putting the device into D3 if there's no link (in ms). */
+#define LINK_TIMEOUT		100
+
+/* Count for polling __E1000_RESET condition every 10-20msec.
+ * Experimentation has shown the reset can take approximately 210msec.
+ */
+#define E1000_CHECK_RESET_COUNT		25
+
+#define DEFAULT_RDTR			0
+#define DEFAULT_RADV			8
+#define BURST_RDTR			0x20
+#define BURST_RADV			0x20
+
+/* in the case of WTHRESH, it appears at least the 82571/2 hardware
+ * writes back 4 descriptors when WTHRESH=5, and 3 descriptors when
+ * WTHRESH=4, so a setting of 5 gives the most efficient bus
+ * utilization but to avoid possible Tx stalls, set it to 1
+ */
+#define E1000_TXDCTL_DMA_BURST_ENABLE                          \
+	(E1000_TXDCTL_GRAN | /* set descriptor granularity */  \
+	 E1000_TXDCTL_COUNT_DESC |                             \
+	 (1 << 16) | /* wthresh must be +1 more than desired */\
+	 (1 << 8)  | /* hthresh */                             \
+	 0x1f)       /* pthresh */
+
+#define E1000_RXDCTL_DMA_BURST_ENABLE                          \
+	(0x01000000 | /* set descriptor granularity */         \
+	 (4 << 16)  | /* set writeback threshold    */         \
+	 (4 << 8)   | /* set prefetch threshold     */         \
+	 0x20)        /* set hthresh                */
+
+#define E1000_TIDV_FPD (1 << 31)
+#define E1000_RDTR_FPD (1 << 31)
+
+enum e1000_boards {
+	board_82571,
+	board_82572,
+	board_82573,
+	board_82574,
+	board_82583,
+	board_80003es2lan,
+	board_ich8lan,
+	board_ich9lan,
+	board_ich10lan,
+	board_pchlan,
+	board_pch2lan,
+	board_pch_lpt,
+	board_pch_spt
+};
+
+struct e1000_ps_page {
+	struct page *page;
+	u64 dma; /* must be u64 - written to hw */
+};
+
+/* wrappers around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct e1000_buffer {
+	dma_addr_t dma;
+	struct sk_buff *skb;
+	union {
+		/* Tx */
+		struct {
+			unsigned long time_stamp;
+			u16 length;
+			u16 next_to_watch;
+			unsigned int segs;
+			unsigned int bytecount;
+			u16 mapped_as_page;
+		};
+		/* Rx */
+		struct {
+			/* arrays of page information for packet split */
+			struct e1000_ps_page *ps_pages;
+			struct page *page;
+		};
+	};
+};
+
+struct e1000_ring {
+	struct e1000_adapter *adapter;	/* back pointer to adapter */
+	void *desc;			/* pointer to ring memory  */
+	dma_addr_t dma;			/* phys address of ring    */
+	unsigned int size;		/* length of ring in bytes */
+	unsigned int count;		/* number of desc. in ring */
+
+	u16 next_to_use;
+	u16 next_to_clean;
+
+	void __iomem *head;
+	void __iomem *tail;
+
+	/* array of buffer information structs */
+	struct e1000_buffer *buffer_info;
+
+	char name[IFNAMSIZ + 5];
+	u32 ims_val;
+	u32 itr_val;
+	void __iomem *itr_register;
+	int set_itr;
+
+	struct sk_buff *rx_skb_top;
+};
+
+/* PHY register snapshot values */
+struct e1000_phy_regs {
+	u16 bmcr;		/* basic mode control register    */
+	u16 bmsr;		/* basic mode status register     */
+	u16 advertise;		/* auto-negotiation advertisement */
+	u16 lpa;		/* link partner ability register  */
+	u16 expansion;		/* auto-negotiation expansion reg */
+	u16 ctrl1000;		/* 1000BASE-T control register    */
+	u16 stat1000;		/* 1000BASE-T status register     */
+	u16 estatus;		/* extended status register       */
+};
+
+/* board specific private data structure */
+struct e1000_adapter {
+	struct timer_list watchdog_timer;
+	struct timer_list phy_info_timer;
+	struct timer_list blink_timer;
+
+	struct work_struct reset_task;
+	struct work_struct watchdog_task;
+
+	const struct e1000_info *ei;
+
+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+	u32 bd_number;
+	u32 rx_buffer_len;
+	u16 mng_vlan_id;
+	u16 link_speed;
+	u16 link_duplex;
+	u16 eeprom_vers;
+
+	/* track device up/down/testing state */
+	unsigned long state;
+
+	/* Interrupt Throttle Rate */
+	u32 itr;
+	u32 itr_setting;
+	u16 tx_itr;
+	u16 rx_itr;
+
+	/* Tx - one ring per active queue */
+	struct e1000_ring *tx_ring ____cacheline_aligned_in_smp;
+	u32 tx_fifo_limit;
+
+	struct napi_struct napi;
+
+	unsigned int uncorr_errors;	/* uncorrectable ECC errors */
+	unsigned int corr_errors;	/* correctable ECC errors */
+	unsigned int restart_queue;
+	u32 txd_cmd;
+
+	bool detect_tx_hung;
+	bool tx_hang_recheck;
+	u8 tx_timeout_factor;
+
+	u32 tx_int_delay;
+	u32 tx_abs_int_delay;
+
+	unsigned int total_tx_bytes;
+	unsigned int total_tx_packets;
+	unsigned int total_rx_bytes;
+	unsigned int total_rx_packets;
+
+	/* Tx stats */
+	u64 tpt_old;
+	u64 colc_old;
+	u32 gotc;
+	u64 gotc_old;
+	u32 tx_timeout_count;
+	u32 tx_fifo_head;
+	u32 tx_head_addr;
+	u32 tx_fifo_size;
+	u32 tx_dma_failed;
+	u32 tx_hwtstamp_timeouts;
+
+	/* Rx */
+	bool (*clean_rx)(struct e1000_ring *ring, int *work_done,
+			 int work_to_do) ____cacheline_aligned_in_smp;
+	void (*alloc_rx_buf)(struct e1000_ring *ring, int cleaned_count,
+			     gfp_t gfp);
+	struct e1000_ring *rx_ring;
+
+	u32 rx_int_delay;
+	u32 rx_abs_int_delay;
+
+	/* Rx stats */
+	u64 hw_csum_err;
+	u64 hw_csum_good;
+	u64 rx_hdr_split;
+	u32 gorc;
+	u64 gorc_old;
+	u32 alloc_rx_buff_failed;
+	u32 rx_dma_failed;
+	u32 rx_hwtstamp_cleared;
+
+	unsigned int rx_ps_pages;
+	u16 rx_ps_bsize0;
+	u32 max_frame_size;
+	u32 min_frame_size;
+
+	/* OS defined structs */
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+
+	/* structs defined in e1000_hw.h */
+	struct e1000_hw hw;
+
+	spinlock_t stats64_lock;	/* protects statistics counters */
+	struct e1000_hw_stats stats;
+	struct e1000_phy_info phy_info;
+	struct e1000_phy_stats phy_stats;
+
+	/* Snapshot of PHY registers */
+	struct e1000_phy_regs phy_regs;
+
+	struct e1000_ring test_tx_ring;
+	struct e1000_ring test_rx_ring;
+	u32 test_icr;
+
+	u32 msg_enable;
+	unsigned int num_vectors;
+	struct msix_entry *msix_entries;
+	int int_mode;
+	u32 eiac_mask;
+
+	u32 eeprom_wol;
+	u32 wol;
+	u32 pba;
+	u32 max_hw_frame_size;
+
+	bool fc_autoneg;
+
+	unsigned int flags;
+	unsigned int flags2;
+	struct work_struct downshift_task;
+	struct work_struct update_phy_task;
+	struct work_struct print_hang_task;
+
+	int phy_hang_count;
+
+	u16 tx_ring_count;
+	u16 rx_ring_count;
+
+	struct hwtstamp_config hwtstamp_config;
+	struct delayed_work systim_overflow_work;
+	struct sk_buff *tx_hwtstamp_skb;
+	unsigned long tx_hwtstamp_start;
+	struct work_struct tx_hwtstamp_work;
+	spinlock_t systim_lock;	/* protects SYSTIML/H regsters */
+	struct cyclecounter cc;
+	struct timecounter tc;
+	struct ptp_clock *ptp_clock;
+	struct ptp_clock_info ptp_clock_info;
+	struct pm_qos_request pm_qos_req;
+
+	u16 eee_advert;
+};
+
+struct e1000_info {
+	enum e1000_mac_type	mac;
+	unsigned int		flags;
+	unsigned int		flags2;
+	u32			pba;
+	u32			max_hw_frame_size;
+	s32			(*get_variants)(struct e1000_adapter *);
+	const struct e1000_mac_operations *mac_ops;
+	const struct e1000_phy_operations *phy_ops;
+	const struct e1000_nvm_operations *nvm_ops;
+};
+
+s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca);
+
+/* The system time is maintained by a 64-bit counter comprised of the 32-bit
+ * SYSTIMH and SYSTIML registers.  How the counter increments (and therefore
+ * its resolution) is based on the contents of the TIMINCA register - it
+ * increments every incperiod (bits 31:24) clock ticks by incvalue (bits 23:0).
+ * For the best accuracy, the incperiod should be as small as possible.  The
+ * incvalue is scaled by a factor as large as possible (while still fitting
+ * in bits 23:0) so that relatively small clock corrections can be made.
+ *
+ * As a result, a shift of INCVALUE_SHIFT_n is used to fit a value of
+ * INCVALUE_n into the TIMINCA register allowing 32+8+(24-INCVALUE_SHIFT_n)
+ * bits to count nanoseconds leaving the rest for fractional nonseconds.
+ */
+#define INCVALUE_96MHz		125
+#define INCVALUE_SHIFT_96MHz	17
+#define INCPERIOD_SHIFT_96MHz	2
+#define INCPERIOD_96MHz		(12 >> INCPERIOD_SHIFT_96MHz)
+
+#define INCVALUE_25MHz		40
+#define INCVALUE_SHIFT_25MHz	18
+#define INCPERIOD_25MHz		1
+
+/* Another drawback of scaling the incvalue by a large factor is the
+ * 64-bit SYSTIM register overflows more quickly.  This is dealt with
+ * by simply reading the clock before it overflows.
+ *
+ * Clock	ns bits	Overflows after
+ * ~~~~~~	~~~~~~~	~~~~~~~~~~~~~~~
+ * 96MHz	47-bit	2^(47-INCPERIOD_SHIFT_96MHz) / 10^9 / 3600 = 9.77 hrs
+ * 25MHz	46-bit	2^46 / 10^9 / 3600 = 19.55 hours
+ */
+#define E1000_SYSTIM_OVERFLOW_PERIOD	(HZ * 60 * 60 * 4)
+#define E1000_MAX_82574_SYSTIM_REREADS	50
+#define E1000_82574_SYSTIM_EPSILON	(1ULL << 35ULL)
+
+/* hardware capability, feature, and workaround flags */
+#define FLAG_HAS_AMT                      (1 << 0)
+#define FLAG_HAS_FLASH                    (1 << 1)
+#define FLAG_HAS_HW_VLAN_FILTER           (1 << 2)
+#define FLAG_HAS_WOL                      (1 << 3)
+/* reserved bit4 */
+#define FLAG_HAS_CTRLEXT_ON_LOAD          (1 << 5)
+#define FLAG_HAS_SWSM_ON_LOAD             (1 << 6)
+#define FLAG_HAS_JUMBO_FRAMES             (1 << 7)
+#define FLAG_READ_ONLY_NVM                (1 << 8)
+#define FLAG_IS_ICH                       (1 << 9)
+#define FLAG_HAS_MSIX                     (1 << 10)
+#define FLAG_HAS_SMART_POWER_DOWN         (1 << 11)
+#define FLAG_IS_QUAD_PORT_A               (1 << 12)
+#define FLAG_IS_QUAD_PORT                 (1 << 13)
+#define FLAG_HAS_HW_TIMESTAMP             (1 << 14)
+#define FLAG_APME_IN_WUC                  (1 << 15)
+#define FLAG_APME_IN_CTRL3                (1 << 16)
+#define FLAG_APME_CHECK_PORT_B            (1 << 17)
+#define FLAG_DISABLE_FC_PAUSE_TIME        (1 << 18)
+#define FLAG_NO_WAKE_UCAST                (1 << 19)
+#define FLAG_MNG_PT_ENABLED               (1 << 20)
+#define FLAG_RESET_OVERWRITES_LAA         (1 << 21)
+#define FLAG_TARC_SPEED_MODE_BIT          (1 << 22)
+#define FLAG_TARC_SET_BIT_ZERO            (1 << 23)
+#define FLAG_RX_NEEDS_RESTART             (1 << 24)
+#define FLAG_LSC_GIG_SPEED_DROP           (1 << 25)
+#define FLAG_SMART_POWER_DOWN             (1 << 26)
+#define FLAG_MSI_ENABLED                  (1 << 27)
+/* reserved (1 << 28) */
+#define FLAG_TSO_FORCE                    (1 << 29)
+#define FLAG_RESTART_NOW                  (1 << 30)
+#define FLAG_MSI_TEST_FAILED              (1 << 31)
+
+#define FLAG2_CRC_STRIPPING               (1 << 0)
+#define FLAG2_HAS_PHY_WAKEUP              (1 << 1)
+#define FLAG2_IS_DISCARDING               (1 << 2)
+#define FLAG2_DISABLE_ASPM_L1             (1 << 3)
+#define FLAG2_HAS_PHY_STATS               (1 << 4)
+#define FLAG2_HAS_EEE                     (1 << 5)
+#define FLAG2_DMA_BURST                   (1 << 6)
+#define FLAG2_DISABLE_ASPM_L0S            (1 << 7)
+#define FLAG2_DISABLE_AIM                 (1 << 8)
+#define FLAG2_CHECK_PHY_HANG              (1 << 9)
+#define FLAG2_NO_DISABLE_RX               (1 << 10)
+#define FLAG2_PCIM2PCI_ARBITER_WA         (1 << 11)
+#define FLAG2_DFLT_CRC_STRIPPING          (1 << 12)
+#define FLAG2_CHECK_RX_HWTSTAMP           (1 << 13)
+
+#define E1000_RX_DESC_PS(R, i)	    \
+	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
+#define E1000_RX_DESC_EXT(R, i)	    \
+	(&(((union e1000_rx_desc_extended *)((R).desc))[i]))
+#define E1000_GET_DESC(R, i, type)	(&(((struct type *)((R).desc))[i]))
+#define E1000_TX_DESC(R, i)		E1000_GET_DESC(R, i, e1000_tx_desc)
+#define E1000_CONTEXT_DESC(R, i)	E1000_GET_DESC(R, i, e1000_context_desc)
+
+enum e1000_state_t {
+	__E1000_TESTING,
+	__E1000_RESETTING,
+	__E1000_ACCESS_SHARED_RESOURCE,
+	__E1000_DOWN
+};
+
+enum latency_range {
+	lowest_latency = 0,
+	low_latency = 1,
+	bulk_latency = 2,
+	latency_invalid = 255
+};
+
+extern char e1000e_driver_name[];
+extern const char e1000e_driver_version[];
+
+void e1000e_check_options(struct e1000_adapter *adapter);
+void e1000e_set_ethtool_ops(struct net_device *netdev);
+
+int e1000e_up(struct e1000_adapter *adapter);
+void e1000e_down(struct e1000_adapter *adapter, bool reset);
+void e1000e_reinit_locked(struct e1000_adapter *adapter);
+void e1000e_reset(struct e1000_adapter *adapter);
+void e1000e_power_up_phy(struct e1000_adapter *adapter);
+int e1000e_setup_rx_resources(struct e1000_ring *ring);
+int e1000e_setup_tx_resources(struct e1000_ring *ring);
+void e1000e_free_rx_resources(struct e1000_ring *ring);
+void e1000e_free_tx_resources(struct e1000_ring *ring);
+struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
+					     struct rtnl_link_stats64 *stats);
+void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
+void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
+void e1000e_get_hw_control(struct e1000_adapter *adapter);
+void e1000e_release_hw_control(struct e1000_adapter *adapter);
+void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr);
+
+extern unsigned int copybreak;
+
+extern const struct e1000_info e1000_82571_info;
+extern const struct e1000_info e1000_82572_info;
+extern const struct e1000_info e1000_82573_info;
+extern const struct e1000_info e1000_82574_info;
+extern const struct e1000_info e1000_82583_info;
+extern const struct e1000_info e1000_ich8_info;
+extern const struct e1000_info e1000_ich9_info;
+extern const struct e1000_info e1000_ich10_info;
+extern const struct e1000_info e1000_pch_info;
+extern const struct e1000_info e1000_pch2_info;
+extern const struct e1000_info e1000_pch_lpt_info;
+extern const struct e1000_info e1000_pch_spt_info;
+extern const struct e1000_info e1000_es2_info;
+
+void e1000e_ptp_init(struct e1000_adapter *adapter);
+void e1000e_ptp_remove(struct e1000_adapter *adapter);
+
+static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
+{
+	return hw->phy.ops.reset(hw);
+}
+
+static inline s32 e1e_rphy(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return hw->phy.ops.read_reg(hw, offset, data);
+}
+
+static inline s32 e1e_rphy_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return hw->phy.ops.read_reg_locked(hw, offset, data);
+}
+
+static inline s32 e1e_wphy(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return hw->phy.ops.write_reg(hw, offset, data);
+}
+
+static inline s32 e1e_wphy_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return hw->phy.ops.write_reg_locked(hw, offset, data);
+}
+
+void e1000e_reload_nvm_generic(struct e1000_hw *hw);
+
+static inline s32 e1000e_read_mac_addr(struct e1000_hw *hw)
+{
+	if (hw->mac.ops.read_mac_addr)
+		return hw->mac.ops.read_mac_addr(hw);
+
+	return e1000_read_mac_addr_generic(hw);
+}
+
+static inline s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
+{
+	return hw->nvm.ops.validate(hw);
+}
+
+static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
+{
+	return hw->nvm.ops.update(hw);
+}
+
+static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+				 u16 *data)
+{
+	return hw->nvm.ops.read(hw, offset, words, data);
+}
+
+static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+				  u16 *data)
+{
+	return hw->nvm.ops.write(hw, offset, words, data);
+}
+
+static inline s32 e1000_get_phy_info(struct e1000_hw *hw)
+{
+	return hw->phy.ops.get_info(hw);
+}
+
+static inline u32 __er32(struct e1000_hw *hw, unsigned long reg)
+{
+	return readl(hw->hw_addr + reg);
+}
+
+#define er32(reg)	__er32(hw, E1000_##reg)
+
+s32 __ew32_prepare(struct e1000_hw *hw);
+void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val);
+
+#define ew32(reg, val)	__ew32(hw, E1000_##reg, (val))
+
+#define e1e_flush()	er32(STATUS)
+
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) \
+	(__ew32((a), (reg + ((offset) << 2)), (value)))
+
+#define E1000_READ_REG_ARRAY(a, reg, offset) \
+	(readl((a)->hw_addr + reg + ((offset) << 2)))
+
+#endif /* _E1000_H_ */
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
new file mode 100644
index 000000000..11f486e4f
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -0,0 +1,2322 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* ethtool support for e1000 */
+
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <linux/pm_runtime.h>
+
+#include "e1000.h"
+
+enum { NETDEV_STATS, E1000_STATS };
+
+struct e1000_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int type;
+	int sizeof_stat;
+	int stat_offset;
+};
+
+#define E1000_STAT(str, m) { \
+		.stat_string = str, \
+		.type = E1000_STATS, \
+		.sizeof_stat = sizeof(((struct e1000_adapter *)0)->m), \
+		.stat_offset = offsetof(struct e1000_adapter, m) }
+#define E1000_NETDEV_STAT(str, m) { \
+		.stat_string = str, \
+		.type = NETDEV_STATS, \
+		.sizeof_stat = sizeof(((struct rtnl_link_stats64 *)0)->m), \
+		.stat_offset = offsetof(struct rtnl_link_stats64, m) }
+
+static const struct e1000_stats e1000_gstrings_stats[] = {
+	E1000_STAT("rx_packets", stats.gprc),
+	E1000_STAT("tx_packets", stats.gptc),
+	E1000_STAT("rx_bytes", stats.gorc),
+	E1000_STAT("tx_bytes", stats.gotc),
+	E1000_STAT("rx_broadcast", stats.bprc),
+	E1000_STAT("tx_broadcast", stats.bptc),
+	E1000_STAT("rx_multicast", stats.mprc),
+	E1000_STAT("tx_multicast", stats.mptc),
+	E1000_NETDEV_STAT("rx_errors", rx_errors),
+	E1000_NETDEV_STAT("tx_errors", tx_errors),
+	E1000_NETDEV_STAT("tx_dropped", tx_dropped),
+	E1000_STAT("multicast", stats.mprc),
+	E1000_STAT("collisions", stats.colc),
+	E1000_NETDEV_STAT("rx_length_errors", rx_length_errors),
+	E1000_NETDEV_STAT("rx_over_errors", rx_over_errors),
+	E1000_STAT("rx_crc_errors", stats.crcerrs),
+	E1000_NETDEV_STAT("rx_frame_errors", rx_frame_errors),
+	E1000_STAT("rx_no_buffer_count", stats.rnbc),
+	E1000_STAT("rx_missed_errors", stats.mpc),
+	E1000_STAT("tx_aborted_errors", stats.ecol),
+	E1000_STAT("tx_carrier_errors", stats.tncrs),
+	E1000_NETDEV_STAT("tx_fifo_errors", tx_fifo_errors),
+	E1000_NETDEV_STAT("tx_heartbeat_errors", tx_heartbeat_errors),
+	E1000_STAT("tx_window_errors", stats.latecol),
+	E1000_STAT("tx_abort_late_coll", stats.latecol),
+	E1000_STAT("tx_deferred_ok", stats.dc),
+	E1000_STAT("tx_single_coll_ok", stats.scc),
+	E1000_STAT("tx_multi_coll_ok", stats.mcc),
+	E1000_STAT("tx_timeout_count", tx_timeout_count),
+	E1000_STAT("tx_restart_queue", restart_queue),
+	E1000_STAT("rx_long_length_errors", stats.roc),
+	E1000_STAT("rx_short_length_errors", stats.ruc),
+	E1000_STAT("rx_align_errors", stats.algnerrc),
+	E1000_STAT("tx_tcp_seg_good", stats.tsctc),
+	E1000_STAT("tx_tcp_seg_failed", stats.tsctfc),
+	E1000_STAT("rx_flow_control_xon", stats.xonrxc),
+	E1000_STAT("rx_flow_control_xoff", stats.xoffrxc),
+	E1000_STAT("tx_flow_control_xon", stats.xontxc),
+	E1000_STAT("tx_flow_control_xoff", stats.xofftxc),
+	E1000_STAT("rx_csum_offload_good", hw_csum_good),
+	E1000_STAT("rx_csum_offload_errors", hw_csum_err),
+	E1000_STAT("rx_header_split", rx_hdr_split),
+	E1000_STAT("alloc_rx_buff_failed", alloc_rx_buff_failed),
+	E1000_STAT("tx_smbus", stats.mgptc),
+	E1000_STAT("rx_smbus", stats.mgprc),
+	E1000_STAT("dropped_smbus", stats.mgpdc),
+	E1000_STAT("rx_dma_failed", rx_dma_failed),
+	E1000_STAT("tx_dma_failed", tx_dma_failed),
+	E1000_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
+	E1000_STAT("uncorr_ecc_errors", uncorr_errors),
+	E1000_STAT("corr_ecc_errors", corr_errors),
+	E1000_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts),
+};
+
+#define E1000_GLOBAL_STATS_LEN	ARRAY_SIZE(e1000_gstrings_stats)
+#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN)
+static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
+	"Register test  (offline)", "Eeprom test    (offline)",
+	"Interrupt test (offline)", "Loopback test  (offline)",
+	"Link test   (on/offline)"
+};
+
+#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
+
+static int e1000_get_settings(struct net_device *netdev,
+			      struct ethtool_cmd *ecmd)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 speed;
+
+	if (hw->phy.media_type == e1000_media_type_copper) {
+		ecmd->supported = (SUPPORTED_10baseT_Half |
+				   SUPPORTED_10baseT_Full |
+				   SUPPORTED_100baseT_Half |
+				   SUPPORTED_100baseT_Full |
+				   SUPPORTED_1000baseT_Full |
+				   SUPPORTED_Autoneg |
+				   SUPPORTED_TP);
+		if (hw->phy.type == e1000_phy_ife)
+			ecmd->supported &= ~SUPPORTED_1000baseT_Full;
+		ecmd->advertising = ADVERTISED_TP;
+
+		if (hw->mac.autoneg == 1) {
+			ecmd->advertising |= ADVERTISED_Autoneg;
+			/* the e1000 autoneg seems to match ethtool nicely */
+			ecmd->advertising |= hw->phy.autoneg_advertised;
+		}
+
+		ecmd->port = PORT_TP;
+		ecmd->phy_address = hw->phy.addr;
+		ecmd->transceiver = XCVR_INTERNAL;
+
+	} else {
+		ecmd->supported   = (SUPPORTED_1000baseT_Full |
+				     SUPPORTED_FIBRE |
+				     SUPPORTED_Autoneg);
+
+		ecmd->advertising = (ADVERTISED_1000baseT_Full |
+				     ADVERTISED_FIBRE |
+				     ADVERTISED_Autoneg);
+
+		ecmd->port = PORT_FIBRE;
+		ecmd->transceiver = XCVR_EXTERNAL;
+	}
+
+	speed = SPEED_UNKNOWN;
+	ecmd->duplex = DUPLEX_UNKNOWN;
+
+	if (netif_running(netdev)) {
+		if (netif_carrier_ok(netdev)) {
+			speed = adapter->link_speed;
+			ecmd->duplex = adapter->link_duplex - 1;
+		}
+	} else if (!pm_runtime_suspended(netdev->dev.parent)) {
+		u32 status = er32(STATUS);
+
+		if (status & E1000_STATUS_LU) {
+			if (status & E1000_STATUS_SPEED_1000)
+				speed = SPEED_1000;
+			else if (status & E1000_STATUS_SPEED_100)
+				speed = SPEED_100;
+			else
+				speed = SPEED_10;
+
+			if (status & E1000_STATUS_FD)
+				ecmd->duplex = DUPLEX_FULL;
+			else
+				ecmd->duplex = DUPLEX_HALF;
+		}
+	}
+
+	ethtool_cmd_speed_set(ecmd, speed);
+	ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
+			 hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+	/* MDI-X => 2; MDI =>1; Invalid =>0 */
+	if ((hw->phy.media_type == e1000_media_type_copper) &&
+	    netif_carrier_ok(netdev))
+		ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X : ETH_TP_MDI;
+	else
+		ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+
+	if (hw->phy.mdix == AUTO_ALL_MODES)
+		ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+	else
+		ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+
+	return 0;
+}
+
+static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
+{
+	struct e1000_mac_info *mac = &adapter->hw.mac;
+
+	mac->autoneg = 0;
+
+	/* Make sure dplx is at most 1 bit and lsb of speed is not set
+	 * for the switch() below to work
+	 */
+	if ((spd & 1) || (dplx & ~1))
+		goto err_inval;
+
+	/* Fiber NICs only allow 1000 gbps Full duplex */
+	if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
+	    (spd != SPEED_1000) && (dplx != DUPLEX_FULL)) {
+		goto err_inval;
+	}
+
+	switch (spd + dplx) {
+	case SPEED_10 + DUPLEX_HALF:
+		mac->forced_speed_duplex = ADVERTISE_10_HALF;
+		break;
+	case SPEED_10 + DUPLEX_FULL:
+		mac->forced_speed_duplex = ADVERTISE_10_FULL;
+		break;
+	case SPEED_100 + DUPLEX_HALF:
+		mac->forced_speed_duplex = ADVERTISE_100_HALF;
+		break;
+	case SPEED_100 + DUPLEX_FULL:
+		mac->forced_speed_duplex = ADVERTISE_100_FULL;
+		break;
+	case SPEED_1000 + DUPLEX_FULL:
+		mac->autoneg = 1;
+		adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
+		break;
+	case SPEED_1000 + DUPLEX_HALF:	/* not supported */
+	default:
+		goto err_inval;
+	}
+
+	/* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
+	adapter->hw.phy.mdix = AUTO_ALL_MODES;
+
+	return 0;
+
+err_inval:
+	e_err("Unsupported Speed/Duplex configuration\n");
+	return -EINVAL;
+}
+
+static int e1000_set_settings(struct net_device *netdev,
+			      struct ethtool_cmd *ecmd)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	int ret_val = 0;
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	/* When SoL/IDER sessions are active, autoneg/speed/duplex
+	 * cannot be changed
+	 */
+	if (hw->phy.ops.check_reset_block &&
+	    hw->phy.ops.check_reset_block(hw)) {
+		e_err("Cannot change link characteristics when SoL/IDER is active.\n");
+		ret_val = -EINVAL;
+		goto out;
+	}
+
+	/* MDI setting is only allowed when autoneg enabled because
+	 * some hardware doesn't allow MDI setting when speed or
+	 * duplex is forced.
+	 */
+	if (ecmd->eth_tp_mdix_ctrl) {
+		if (hw->phy.media_type != e1000_media_type_copper) {
+			ret_val = -EOPNOTSUPP;
+			goto out;
+		}
+
+		if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+		    (ecmd->autoneg != AUTONEG_ENABLE)) {
+			e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
+			ret_val = -EINVAL;
+			goto out;
+		}
+	}
+
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+		usleep_range(1000, 2000);
+
+	if (ecmd->autoneg == AUTONEG_ENABLE) {
+		hw->mac.autoneg = 1;
+		if (hw->phy.media_type == e1000_media_type_fiber)
+			hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
+			    ADVERTISED_FIBRE | ADVERTISED_Autoneg;
+		else
+			hw->phy.autoneg_advertised = ecmd->advertising |
+			    ADVERTISED_TP | ADVERTISED_Autoneg;
+		ecmd->advertising = hw->phy.autoneg_advertised;
+		if (adapter->fc_autoneg)
+			hw->fc.requested_mode = e1000_fc_default;
+	} else {
+		u32 speed = ethtool_cmd_speed(ecmd);
+		/* calling this overrides forced MDI setting */
+		if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
+			ret_val = -EINVAL;
+			goto out;
+		}
+	}
+
+	/* MDI-X => 2; MDI => 1; Auto => 3 */
+	if (ecmd->eth_tp_mdix_ctrl) {
+		/* fix up the value for auto (3 => 0) as zero is mapped
+		 * internally to auto
+		 */
+		if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+			hw->phy.mdix = AUTO_ALL_MODES;
+		else
+			hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
+	}
+
+	/* reset the link */
+	if (netif_running(adapter->netdev)) {
+		e1000e_down(adapter, true);
+		e1000e_up(adapter);
+	} else {
+		e1000e_reset(adapter);
+	}
+
+out:
+	pm_runtime_put_sync(netdev->dev.parent);
+	clear_bit(__E1000_RESETTING, &adapter->state);
+	return ret_val;
+}
+
+static void e1000_get_pauseparam(struct net_device *netdev,
+				 struct ethtool_pauseparam *pause)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+
+	pause->autoneg =
+	    (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+	if (hw->fc.current_mode == e1000_fc_rx_pause) {
+		pause->rx_pause = 1;
+	} else if (hw->fc.current_mode == e1000_fc_tx_pause) {
+		pause->tx_pause = 1;
+	} else if (hw->fc.current_mode == e1000_fc_full) {
+		pause->rx_pause = 1;
+		pause->tx_pause = 1;
+	}
+}
+
+static int e1000_set_pauseparam(struct net_device *netdev,
+				struct ethtool_pauseparam *pause)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	int retval = 0;
+
+	adapter->fc_autoneg = pause->autoneg;
+
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+		usleep_range(1000, 2000);
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+		hw->fc.requested_mode = e1000_fc_default;
+		if (netif_running(adapter->netdev)) {
+			e1000e_down(adapter, true);
+			e1000e_up(adapter);
+		} else {
+			e1000e_reset(adapter);
+		}
+	} else {
+		if (pause->rx_pause && pause->tx_pause)
+			hw->fc.requested_mode = e1000_fc_full;
+		else if (pause->rx_pause && !pause->tx_pause)
+			hw->fc.requested_mode = e1000_fc_rx_pause;
+		else if (!pause->rx_pause && pause->tx_pause)
+			hw->fc.requested_mode = e1000_fc_tx_pause;
+		else if (!pause->rx_pause && !pause->tx_pause)
+			hw->fc.requested_mode = e1000_fc_none;
+
+		hw->fc.current_mode = hw->fc.requested_mode;
+
+		if (hw->phy.media_type == e1000_media_type_fiber) {
+			retval = hw->mac.ops.setup_link(hw);
+			/* implicit goto out */
+		} else {
+			retval = e1000e_force_mac_fc(hw);
+			if (retval)
+				goto out;
+			e1000e_set_fc_watermarks(hw);
+		}
+	}
+
+out:
+	pm_runtime_put_sync(netdev->dev.parent);
+	clear_bit(__E1000_RESETTING, &adapter->state);
+	return retval;
+}
+
+static u32 e1000_get_msglevel(struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	return adapter->msg_enable;
+}
+
+static void e1000_set_msglevel(struct net_device *netdev, u32 data)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	adapter->msg_enable = data;
+}
+
+static int e1000_get_regs_len(struct net_device __always_unused *netdev)
+{
+#define E1000_REGS_LEN 32	/* overestimate */
+	return E1000_REGS_LEN * sizeof(u32);
+}
+
+static void e1000_get_regs(struct net_device *netdev,
+			   struct ethtool_regs *regs, void *p)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 *regs_buff = p;
+	u16 phy_data;
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	memset(p, 0, E1000_REGS_LEN * sizeof(u32));
+
+	regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
+	    adapter->pdev->device;
+
+	regs_buff[0] = er32(CTRL);
+	regs_buff[1] = er32(STATUS);
+
+	regs_buff[2] = er32(RCTL);
+	regs_buff[3] = er32(RDLEN(0));
+	regs_buff[4] = er32(RDH(0));
+	regs_buff[5] = er32(RDT(0));
+	regs_buff[6] = er32(RDTR);
+
+	regs_buff[7] = er32(TCTL);
+	regs_buff[8] = er32(TDLEN(0));
+	regs_buff[9] = er32(TDH(0));
+	regs_buff[10] = er32(TDT(0));
+	regs_buff[11] = er32(TIDV);
+
+	regs_buff[12] = adapter->hw.phy.type;	/* PHY type (IGP=1, M88=0) */
+
+	/* ethtool doesn't use anything past this point, so all this
+	 * code is likely legacy junk for apps that may or may not exist
+	 */
+	if (hw->phy.type == e1000_phy_m88) {
+		e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+		regs_buff[13] = (u32)phy_data; /* cable length */
+		regs_buff[14] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
+		regs_buff[15] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
+		regs_buff[16] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
+		e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+		regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
+		regs_buff[18] = regs_buff[13]; /* cable polarity */
+		regs_buff[19] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
+		regs_buff[20] = regs_buff[17]; /* polarity correction */
+		/* phy receive errors */
+		regs_buff[22] = adapter->phy_stats.receive_errors;
+		regs_buff[23] = regs_buff[13]; /* mdix mode */
+	}
+	regs_buff[21] = 0;	/* was idle_errors */
+	e1e_rphy(hw, MII_STAT1000, &phy_data);
+	regs_buff[24] = (u32)phy_data;	/* phy local receiver status */
+	regs_buff[25] = regs_buff[24];	/* phy remote receiver status */
+
+	pm_runtime_put_sync(netdev->dev.parent);
+}
+
+static int e1000_get_eeprom_len(struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	return adapter->hw.nvm.word_size * 2;
+}
+
+static int e1000_get_eeprom(struct net_device *netdev,
+			    struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 *eeprom_buff;
+	int first_word;
+	int last_word;
+	int ret_val = 0;
+	u16 i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	eeprom->magic = adapter->pdev->vendor | (adapter->pdev->device << 16);
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+	eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+			      GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+		ret_val = e1000_read_nvm(hw, first_word,
+					 last_word - first_word + 1,
+					 eeprom_buff);
+	} else {
+		for (i = 0; i < last_word - first_word + 1; i++) {
+			ret_val = e1000_read_nvm(hw, first_word + i, 1,
+						 &eeprom_buff[i]);
+			if (ret_val)
+				break;
+		}
+	}
+
+	pm_runtime_put_sync(netdev->dev.parent);
+
+	if (ret_val) {
+		/* a read error occurred, throw away the result */
+		memset(eeprom_buff, 0xff, sizeof(u16) *
+		       (last_word - first_word + 1));
+	} else {
+		/* Device's eeprom is always little-endian, word addressable */
+		for (i = 0; i < last_word - first_word + 1; i++)
+			le16_to_cpus(&eeprom_buff[i]);
+	}
+
+	memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+	kfree(eeprom_buff);
+
+	return ret_val;
+}
+
+static int e1000_set_eeprom(struct net_device *netdev,
+			    struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 *eeprom_buff;
+	void *ptr;
+	int max_len;
+	int first_word;
+	int last_word;
+	int ret_val = 0;
+	u16 i;
+
+	if (eeprom->len == 0)
+		return -EOPNOTSUPP;
+
+	if (eeprom->magic !=
+	    (adapter->pdev->vendor | (adapter->pdev->device << 16)))
+		return -EFAULT;
+
+	if (adapter->flags & FLAG_READ_ONLY_NVM)
+		return -EINVAL;
+
+	max_len = hw->nvm.word_size * 2;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+	eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	ptr = (void *)eeprom_buff;
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	if (eeprom->offset & 1) {
+		/* need read/modify/write of first changed EEPROM word */
+		/* only the second byte of the word is being modified */
+		ret_val = e1000_read_nvm(hw, first_word, 1, &eeprom_buff[0]);
+		ptr++;
+	}
+	if (((eeprom->offset + eeprom->len) & 1) && (!ret_val))
+		/* need read/modify/write of last changed EEPROM word */
+		/* only the first byte of the word is being modified */
+		ret_val = e1000_read_nvm(hw, last_word, 1,
+					 &eeprom_buff[last_word - first_word]);
+
+	if (ret_val)
+		goto out;
+
+	/* Device's eeprom is always little-endian, word addressable */
+	for (i = 0; i < last_word - first_word + 1; i++)
+		le16_to_cpus(&eeprom_buff[i]);
+
+	memcpy(ptr, bytes, eeprom->len);
+
+	for (i = 0; i < last_word - first_word + 1; i++)
+		cpu_to_le16s(&eeprom_buff[i]);
+
+	ret_val = e1000_write_nvm(hw, first_word,
+				  last_word - first_word + 1, eeprom_buff);
+
+	if (ret_val)
+		goto out;
+
+	/* Update the checksum over the first part of the EEPROM if needed
+	 * and flush shadow RAM for applicable controllers
+	 */
+	if ((first_word <= NVM_CHECKSUM_REG) ||
+	    (hw->mac.type == e1000_82583) ||
+	    (hw->mac.type == e1000_82574) ||
+	    (hw->mac.type == e1000_82573))
+		ret_val = e1000e_update_nvm_checksum(hw);
+
+out:
+	pm_runtime_put_sync(netdev->dev.parent);
+	kfree(eeprom_buff);
+	return ret_val;
+}
+
+static void e1000_get_drvinfo(struct net_device *netdev,
+			      struct ethtool_drvinfo *drvinfo)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	strlcpy(drvinfo->driver, e1000e_driver_name, sizeof(drvinfo->driver));
+	strlcpy(drvinfo->version, e1000e_driver_version,
+		sizeof(drvinfo->version));
+
+	/* EEPROM image version # is reported as firmware version # for
+	 * PCI-E controllers
+	 */
+	snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
+		 "%d.%d-%d",
+		 (adapter->eeprom_vers & 0xF000) >> 12,
+		 (adapter->eeprom_vers & 0x0FF0) >> 4,
+		 (adapter->eeprom_vers & 0x000F));
+
+	strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
+		sizeof(drvinfo->bus_info));
+	drvinfo->regdump_len = e1000_get_regs_len(netdev);
+	drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
+}
+
+static void e1000_get_ringparam(struct net_device *netdev,
+				struct ethtool_ringparam *ring)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	ring->rx_max_pending = E1000_MAX_RXD;
+	ring->tx_max_pending = E1000_MAX_TXD;
+	ring->rx_pending = adapter->rx_ring_count;
+	ring->tx_pending = adapter->tx_ring_count;
+}
+
+static int e1000_set_ringparam(struct net_device *netdev,
+			       struct ethtool_ringparam *ring)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_ring *temp_tx = NULL, *temp_rx = NULL;
+	int err = 0, size = sizeof(struct e1000_ring);
+	bool set_tx = false, set_rx = false;
+	u16 new_rx_count, new_tx_count;
+
+	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+		return -EINVAL;
+
+	new_rx_count = clamp_t(u32, ring->rx_pending, E1000_MIN_RXD,
+			       E1000_MAX_RXD);
+	new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+	new_tx_count = clamp_t(u32, ring->tx_pending, E1000_MIN_TXD,
+			       E1000_MAX_TXD);
+	new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+	if ((new_tx_count == adapter->tx_ring_count) &&
+	    (new_rx_count == adapter->rx_ring_count))
+		/* nothing to do */
+		return 0;
+
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+		usleep_range(1000, 2000);
+
+	if (!netif_running(adapter->netdev)) {
+		/* Set counts now and allocate resources during open() */
+		adapter->tx_ring->count = new_tx_count;
+		adapter->rx_ring->count = new_rx_count;
+		adapter->tx_ring_count = new_tx_count;
+		adapter->rx_ring_count = new_rx_count;
+		goto clear_reset;
+	}
+
+	set_tx = (new_tx_count != adapter->tx_ring_count);
+	set_rx = (new_rx_count != adapter->rx_ring_count);
+
+	/* Allocate temporary storage for ring updates */
+	if (set_tx) {
+		temp_tx = vmalloc(size);
+		if (!temp_tx) {
+			err = -ENOMEM;
+			goto free_temp;
+		}
+	}
+	if (set_rx) {
+		temp_rx = vmalloc(size);
+		if (!temp_rx) {
+			err = -ENOMEM;
+			goto free_temp;
+		}
+	}
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	e1000e_down(adapter, true);
+
+	/* We can't just free everything and then setup again, because the
+	 * ISRs in MSI-X mode get passed pointers to the Tx and Rx ring
+	 * structs.  First, attempt to allocate new resources...
+	 */
+	if (set_tx) {
+		memcpy(temp_tx, adapter->tx_ring, size);
+		temp_tx->count = new_tx_count;
+		err = e1000e_setup_tx_resources(temp_tx);
+		if (err)
+			goto err_setup;
+	}
+	if (set_rx) {
+		memcpy(temp_rx, adapter->rx_ring, size);
+		temp_rx->count = new_rx_count;
+		err = e1000e_setup_rx_resources(temp_rx);
+		if (err)
+			goto err_setup_rx;
+	}
+
+	/* ...then free the old resources and copy back any new ring data */
+	if (set_tx) {
+		e1000e_free_tx_resources(adapter->tx_ring);
+		memcpy(adapter->tx_ring, temp_tx, size);
+		adapter->tx_ring_count = new_tx_count;
+	}
+	if (set_rx) {
+		e1000e_free_rx_resources(adapter->rx_ring);
+		memcpy(adapter->rx_ring, temp_rx, size);
+		adapter->rx_ring_count = new_rx_count;
+	}
+
+err_setup_rx:
+	if (err && set_tx)
+		e1000e_free_tx_resources(temp_tx);
+err_setup:
+	e1000e_up(adapter);
+	pm_runtime_put_sync(netdev->dev.parent);
+free_temp:
+	vfree(temp_tx);
+	vfree(temp_rx);
+clear_reset:
+	clear_bit(__E1000_RESETTING, &adapter->state);
+	return err;
+}
+
+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
+			     int reg, int offset, u32 mask, u32 write)
+{
+	u32 pat, val;
+	static const u32 test[] = {
+		0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
+	};
+	for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
+		E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
+				      (test[pat] & write));
+		val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
+		if (val != (test[pat] & write & mask)) {
+			e_err("pattern test failed (reg 0x%05X): got 0x%08X expected 0x%08X\n",
+			      reg + (offset << 2), val,
+			      (test[pat] & write & mask));
+			*data = reg;
+			return true;
+		}
+	}
+	return false;
+}
+
+static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
+			      int reg, u32 mask, u32 write)
+{
+	u32 val;
+
+	__ew32(&adapter->hw, reg, write & mask);
+	val = __er32(&adapter->hw, reg);
+	if ((write & mask) != (val & mask)) {
+		e_err("set/check test failed (reg 0x%05X): got 0x%08X expected 0x%08X\n",
+		      reg, (val & mask), (write & mask));
+		*data = reg;
+		return true;
+	}
+	return false;
+}
+
+#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write)                       \
+	do {                                                                   \
+		if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \
+			return 1;                                              \
+	} while (0)
+#define REG_PATTERN_TEST(reg, mask, write)                                     \
+	REG_PATTERN_TEST_ARRAY(reg, 0, mask, write)
+
+#define REG_SET_AND_CHECK(reg, mask, write)                                    \
+	do {                                                                   \
+		if (reg_set_and_check(adapter, data, reg, mask, write))        \
+			return 1;                                              \
+	} while (0)
+
+static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_mac_info *mac = &adapter->hw.mac;
+	u32 value;
+	u32 before;
+	u32 after;
+	u32 i;
+	u32 toggle;
+	u32 mask;
+	u32 wlock_mac = 0;
+
+	/* The status register is Read Only, so a write should fail.
+	 * Some bits that get toggled are ignored.  There are several bits
+	 * on newer hardware that are r/w.
+	 */
+	switch (mac->type) {
+	case e1000_82571:
+	case e1000_82572:
+	case e1000_80003es2lan:
+		toggle = 0x7FFFF3FF;
+		break;
+	default:
+		toggle = 0x7FFFF033;
+		break;
+	}
+
+	before = er32(STATUS);
+	value = (er32(STATUS) & toggle);
+	ew32(STATUS, toggle);
+	after = er32(STATUS) & toggle;
+	if (value != after) {
+		e_err("failed STATUS register test got: 0x%08X expected: 0x%08X\n",
+		      after, value);
+		*data = 1;
+		return 1;
+	}
+	/* restore previous status */
+	ew32(STATUS, before);
+
+	if (!(adapter->flags & FLAG_IS_ICH)) {
+		REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+		REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF);
+		REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF);
+		REG_PATTERN_TEST(E1000_VET, 0x0000FFFF, 0xFFFFFFFF);
+	}
+
+	REG_PATTERN_TEST(E1000_RDTR, 0x0000FFFF, 0xFFFFFFFF);
+	REG_PATTERN_TEST(E1000_RDBAH(0), 0xFFFFFFFF, 0xFFFFFFFF);
+	REG_PATTERN_TEST(E1000_RDLEN(0), 0x000FFF80, 0x000FFFFF);
+	REG_PATTERN_TEST(E1000_RDH(0), 0x0000FFFF, 0x0000FFFF);
+	REG_PATTERN_TEST(E1000_RDT(0), 0x0000FFFF, 0x0000FFFF);
+	REG_PATTERN_TEST(E1000_FCRTH, 0x0000FFF8, 0x0000FFF8);
+	REG_PATTERN_TEST(E1000_FCTTV, 0x0000FFFF, 0x0000FFFF);
+	REG_PATTERN_TEST(E1000_TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
+	REG_PATTERN_TEST(E1000_TDBAH(0), 0xFFFFFFFF, 0xFFFFFFFF);
+	REG_PATTERN_TEST(E1000_TDLEN(0), 0x000FFF80, 0x000FFFFF);
+
+	REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000);
+
+	before = ((adapter->flags & FLAG_IS_ICH) ? 0x06C3B33E : 0x06DFB3FE);
+	REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB);
+	REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000);
+
+	REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF);
+	REG_PATTERN_TEST(E1000_RDBAL(0), 0xFFFFFFF0, 0xFFFFFFFF);
+	if (!(adapter->flags & FLAG_IS_ICH))
+		REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
+	REG_PATTERN_TEST(E1000_TDBAL(0), 0xFFFFFFF0, 0xFFFFFFFF);
+	REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
+	mask = 0x8003FFFF;
+	switch (mac->type) {
+	case e1000_ich10lan:
+	case e1000_pchlan:
+	case e1000_pch2lan:
+	case e1000_pch_lpt:
+	case e1000_pch_spt:
+		mask |= (1 << 18);
+		break;
+	default:
+		break;
+	}
+
+	if ((mac->type == e1000_pch_lpt) || (mac->type == e1000_pch_spt))
+		wlock_mac = (er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK) >>
+		    E1000_FWSM_WLOCK_MAC_SHIFT;
+
+	for (i = 0; i < mac->rar_entry_count; i++) {
+		if ((mac->type == e1000_pch_lpt) ||
+		    (mac->type == e1000_pch_spt)) {
+			/* Cannot test write-protected SHRAL[n] registers */
+			if ((wlock_mac == 1) || (wlock_mac && (i > wlock_mac)))
+				continue;
+
+			/* SHRAH[9] different than the others */
+			if (i == 10)
+				mask |= (1 << 30);
+			else
+				mask &= ~(1 << 30);
+		}
+		if (mac->type == e1000_pch2lan) {
+			/* SHRAH[0,1,2] different than previous */
+			if (i == 1)
+				mask &= 0xFFF4FFFF;
+			/* SHRAH[3] different than SHRAH[0,1,2] */
+			if (i == 4)
+				mask |= (1 << 30);
+			/* RAR[1-6] owned by management engine - skipping */
+			if (i > 0)
+				i += 6;
+		}
+
+		REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), mask,
+				       0xFFFFFFFF);
+		/* reset index to actual value */
+		if ((mac->type == e1000_pch2lan) && (i > 6))
+			i -= 6;
+	}
+
+	for (i = 0; i < mac->mta_reg_count; i++)
+		REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
+
+	*data = 0;
+
+	return 0;
+}
+
+static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
+{
+	u16 temp;
+	u16 checksum = 0;
+	u16 i;
+
+	*data = 0;
+	/* Read and add up the contents of the EEPROM */
+	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+		if ((e1000_read_nvm(&adapter->hw, i, 1, &temp)) < 0) {
+			*data = 1;
+			return *data;
+		}
+		checksum += temp;
+	}
+
+	/* If Checksum is not Correct return error else test passed */
+	if ((checksum != (u16)NVM_SUM) && !(*data))
+		*data = 2;
+
+	return *data;
+}
+
+static irqreturn_t e1000_test_intr(int __always_unused irq, void *data)
+{
+	struct net_device *netdev = (struct net_device *)data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+
+	adapter->test_icr |= er32(ICR);
+
+	return IRQ_HANDLED;
+}
+
+static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	u32 mask;
+	u32 shared_int = 1;
+	u32 irq = adapter->pdev->irq;
+	int i;
+	int ret_val = 0;
+	int int_mode = E1000E_INT_MODE_LEGACY;
+
+	*data = 0;
+
+	/* NOTE: we don't test MSI/MSI-X interrupts here, yet */
+	if (adapter->int_mode == E1000E_INT_MODE_MSIX) {
+		int_mode = adapter->int_mode;
+		e1000e_reset_interrupt_capability(adapter);
+		adapter->int_mode = E1000E_INT_MODE_LEGACY;
+		e1000e_set_interrupt_capability(adapter);
+	}
+	/* Hook up test interrupt handler just for this test */
+	if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
+			 netdev)) {
+		shared_int = 0;
+	} else if (request_irq(irq, e1000_test_intr, IRQF_SHARED, netdev->name,
+			       netdev)) {
+		*data = 1;
+		ret_val = -1;
+		goto out;
+	}
+	e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
+
+	/* Disable all the interrupts */
+	ew32(IMC, 0xFFFFFFFF);
+	e1e_flush();
+	usleep_range(10000, 20000);
+
+	/* Test each interrupt */
+	for (i = 0; i < 10; i++) {
+		/* Interrupt to test */
+		mask = 1 << i;
+
+		if (adapter->flags & FLAG_IS_ICH) {
+			switch (mask) {
+			case E1000_ICR_RXSEQ:
+				continue;
+			case 0x00000100:
+				if (adapter->hw.mac.type == e1000_ich8lan ||
+				    adapter->hw.mac.type == e1000_ich9lan)
+					continue;
+				break;
+			default:
+				break;
+			}
+		}
+
+		if (!shared_int) {
+			/* Disable the interrupt to be reported in
+			 * the cause register and then force the same
+			 * interrupt and see if one gets posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+			ew32(IMC, mask);
+			ew32(ICS, mask);
+			e1e_flush();
+			usleep_range(10000, 20000);
+
+			if (adapter->test_icr & mask) {
+				*data = 3;
+				break;
+			}
+		}
+
+		/* Enable the interrupt to be reported in
+		 * the cause register and then force the same
+		 * interrupt and see if one gets posted.  If
+		 * an interrupt was not posted to the bus, the
+		 * test failed.
+		 */
+		adapter->test_icr = 0;
+		ew32(IMS, mask);
+		ew32(ICS, mask);
+		e1e_flush();
+		usleep_range(10000, 20000);
+
+		if (!(adapter->test_icr & mask)) {
+			*data = 4;
+			break;
+		}
+
+		if (!shared_int) {
+			/* Disable the other interrupts to be reported in
+			 * the cause register and then force the other
+			 * interrupts and see if any get posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+			ew32(IMC, ~mask & 0x00007FFF);
+			ew32(ICS, ~mask & 0x00007FFF);
+			e1e_flush();
+			usleep_range(10000, 20000);
+
+			if (adapter->test_icr) {
+				*data = 5;
+				break;
+			}
+		}
+	}
+
+	/* Disable all the interrupts */
+	ew32(IMC, 0xFFFFFFFF);
+	e1e_flush();
+	usleep_range(10000, 20000);
+
+	/* Unhook test interrupt handler */
+	free_irq(irq, netdev);
+
+out:
+	if (int_mode == E1000E_INT_MODE_MSIX) {
+		e1000e_reset_interrupt_capability(adapter);
+		adapter->int_mode = int_mode;
+		e1000e_set_interrupt_capability(adapter);
+	}
+
+	return ret_val;
+}
+
+static void e1000_free_desc_rings(struct e1000_adapter *adapter)
+{
+	struct e1000_ring *tx_ring = &adapter->test_tx_ring;
+	struct e1000_ring *rx_ring = &adapter->test_rx_ring;
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_buffer *buffer_info;
+	int i;
+
+	if (tx_ring->desc && tx_ring->buffer_info) {
+		for (i = 0; i < tx_ring->count; i++) {
+			buffer_info = &tx_ring->buffer_info[i];
+
+			if (buffer_info->dma)
+				dma_unmap_single(&pdev->dev,
+						 buffer_info->dma,
+						 buffer_info->length,
+						 DMA_TO_DEVICE);
+			if (buffer_info->skb)
+				dev_kfree_skb(buffer_info->skb);
+		}
+	}
+
+	if (rx_ring->desc && rx_ring->buffer_info) {
+		for (i = 0; i < rx_ring->count; i++) {
+			buffer_info = &rx_ring->buffer_info[i];
+
+			if (buffer_info->dma)
+				dma_unmap_single(&pdev->dev,
+						 buffer_info->dma,
+						 2048, DMA_FROM_DEVICE);
+			if (buffer_info->skb)
+				dev_kfree_skb(buffer_info->skb);
+		}
+	}
+
+	if (tx_ring->desc) {
+		dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
+				  tx_ring->dma);
+		tx_ring->desc = NULL;
+	}
+	if (rx_ring->desc) {
+		dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
+				  rx_ring->dma);
+		rx_ring->desc = NULL;
+	}
+
+	kfree(tx_ring->buffer_info);
+	tx_ring->buffer_info = NULL;
+	kfree(rx_ring->buffer_info);
+	rx_ring->buffer_info = NULL;
+}
+
+static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
+{
+	struct e1000_ring *tx_ring = &adapter->test_tx_ring;
+	struct e1000_ring *rx_ring = &adapter->test_rx_ring;
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl;
+	int i;
+	int ret_val;
+
+	/* Setup Tx descriptor ring and Tx buffers */
+
+	if (!tx_ring->count)
+		tx_ring->count = E1000_DEFAULT_TXD;
+
+	tx_ring->buffer_info = kcalloc(tx_ring->count,
+				       sizeof(struct e1000_buffer), GFP_KERNEL);
+	if (!tx_ring->buffer_info) {
+		ret_val = 1;
+		goto err_nomem;
+	}
+
+	tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
+	tx_ring->size = ALIGN(tx_ring->size, 4096);
+	tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
+					   &tx_ring->dma, GFP_KERNEL);
+	if (!tx_ring->desc) {
+		ret_val = 2;
+		goto err_nomem;
+	}
+	tx_ring->next_to_use = 0;
+	tx_ring->next_to_clean = 0;
+
+	ew32(TDBAL(0), ((u64)tx_ring->dma & 0x00000000FFFFFFFF));
+	ew32(TDBAH(0), ((u64)tx_ring->dma >> 32));
+	ew32(TDLEN(0), tx_ring->count * sizeof(struct e1000_tx_desc));
+	ew32(TDH(0), 0);
+	ew32(TDT(0), 0);
+	ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | E1000_TCTL_MULR |
+	     E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
+	     E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
+
+	for (i = 0; i < tx_ring->count; i++) {
+		struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i);
+		struct sk_buff *skb;
+		unsigned int skb_size = 1024;
+
+		skb = alloc_skb(skb_size, GFP_KERNEL);
+		if (!skb) {
+			ret_val = 3;
+			goto err_nomem;
+		}
+		skb_put(skb, skb_size);
+		tx_ring->buffer_info[i].skb = skb;
+		tx_ring->buffer_info[i].length = skb->len;
+		tx_ring->buffer_info[i].dma =
+		    dma_map_single(&pdev->dev, skb->data, skb->len,
+				   DMA_TO_DEVICE);
+		if (dma_mapping_error(&pdev->dev,
+				      tx_ring->buffer_info[i].dma)) {
+			ret_val = 4;
+			goto err_nomem;
+		}
+		tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma);
+		tx_desc->lower.data = cpu_to_le32(skb->len);
+		tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
+						   E1000_TXD_CMD_IFCS |
+						   E1000_TXD_CMD_RS);
+		tx_desc->upper.data = 0;
+	}
+
+	/* Setup Rx descriptor ring and Rx buffers */
+
+	if (!rx_ring->count)
+		rx_ring->count = E1000_DEFAULT_RXD;
+
+	rx_ring->buffer_info = kcalloc(rx_ring->count,
+				       sizeof(struct e1000_buffer), GFP_KERNEL);
+	if (!rx_ring->buffer_info) {
+		ret_val = 5;
+		goto err_nomem;
+	}
+
+	rx_ring->size = rx_ring->count * sizeof(union e1000_rx_desc_extended);
+	rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
+					   &rx_ring->dma, GFP_KERNEL);
+	if (!rx_ring->desc) {
+		ret_val = 6;
+		goto err_nomem;
+	}
+	rx_ring->next_to_use = 0;
+	rx_ring->next_to_clean = 0;
+
+	rctl = er32(RCTL);
+	if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
+		ew32(RCTL, rctl & ~E1000_RCTL_EN);
+	ew32(RDBAL(0), ((u64)rx_ring->dma & 0xFFFFFFFF));
+	ew32(RDBAH(0), ((u64)rx_ring->dma >> 32));
+	ew32(RDLEN(0), rx_ring->size);
+	ew32(RDH(0), 0);
+	ew32(RDT(0), 0);
+	rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
+	    E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
+	    E1000_RCTL_SBP | E1000_RCTL_SECRC |
+	    E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+	    (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+	ew32(RCTL, rctl);
+
+	for (i = 0; i < rx_ring->count; i++) {
+		union e1000_rx_desc_extended *rx_desc;
+		struct sk_buff *skb;
+
+		skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL);
+		if (!skb) {
+			ret_val = 7;
+			goto err_nomem;
+		}
+		skb_reserve(skb, NET_IP_ALIGN);
+		rx_ring->buffer_info[i].skb = skb;
+		rx_ring->buffer_info[i].dma =
+		    dma_map_single(&pdev->dev, skb->data, 2048,
+				   DMA_FROM_DEVICE);
+		if (dma_mapping_error(&pdev->dev,
+				      rx_ring->buffer_info[i].dma)) {
+			ret_val = 8;
+			goto err_nomem;
+		}
+		rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+		rx_desc->read.buffer_addr =
+		    cpu_to_le64(rx_ring->buffer_info[i].dma);
+		memset(skb->data, 0x00, skb->len);
+	}
+
+	return 0;
+
+err_nomem:
+	e1000_free_desc_rings(adapter);
+	return ret_val;
+}
+
+static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
+{
+	/* Write out to PHY registers 29 and 30 to disable the Receiver. */
+	e1e_wphy(&adapter->hw, 29, 0x001F);
+	e1e_wphy(&adapter->hw, 30, 0x8FFC);
+	e1e_wphy(&adapter->hw, 29, 0x001A);
+	e1e_wphy(&adapter->hw, 30, 0x8FF0);
+}
+
+static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl_reg = 0;
+	u16 phy_reg = 0;
+	s32 ret_val = 0;
+
+	hw->mac.autoneg = 0;
+
+	if (hw->phy.type == e1000_phy_ife) {
+		/* force 100, set loopback */
+		e1e_wphy(hw, MII_BMCR, 0x6100);
+
+		/* Now set up the MAC to the same speed/duplex as the PHY. */
+		ctrl_reg = er32(CTRL);
+		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+			     E1000_CTRL_SPD_100 |/* Force Speed to 100 */
+			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
+
+		ew32(CTRL, ctrl_reg);
+		e1e_flush();
+		usleep_range(500, 1000);
+
+		return 0;
+	}
+
+	/* Specific PHY configuration for loopback */
+	switch (hw->phy.type) {
+	case e1000_phy_m88:
+		/* Auto-MDI/MDIX Off */
+		e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
+		/* reset to update Auto-MDI/MDIX */
+		e1e_wphy(hw, MII_BMCR, 0x9140);
+		/* autoneg off */
+		e1e_wphy(hw, MII_BMCR, 0x8140);
+		break;
+	case e1000_phy_gg82563:
+		e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
+		break;
+	case e1000_phy_bm:
+		/* Set Default MAC Interface speed to 1GB */
+		e1e_rphy(hw, PHY_REG(2, 21), &phy_reg);
+		phy_reg &= ~0x0007;
+		phy_reg |= 0x006;
+		e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
+		/* Assert SW reset for above settings to take effect */
+		hw->phy.ops.commit(hw);
+		usleep_range(1000, 2000);
+		/* Force Full Duplex */
+		e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
+		e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
+		/* Set Link Up (in force link) */
+		e1e_rphy(hw, PHY_REG(776, 16), &phy_reg);
+		e1e_wphy(hw, PHY_REG(776, 16), phy_reg | 0x0040);
+		/* Force Link */
+		e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
+		e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x0040);
+		/* Set Early Link Enable */
+		e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
+		e1e_wphy(hw, PHY_REG(769, 20), phy_reg | 0x0400);
+		break;
+	case e1000_phy_82577:
+	case e1000_phy_82578:
+		/* Workaround: K1 must be disabled for stable 1Gbps operation */
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val) {
+			e_err("Cannot setup 1Gbps loopback.\n");
+			return ret_val;
+		}
+		e1000_configure_k1_ich8lan(hw, false);
+		hw->phy.ops.release(hw);
+		break;
+	case e1000_phy_82579:
+		/* Disable PHY energy detect power down */
+		e1e_rphy(hw, PHY_REG(0, 21), &phy_reg);
+		e1e_wphy(hw, PHY_REG(0, 21), phy_reg & ~(1 << 3));
+		/* Disable full chip energy detect */
+		e1e_rphy(hw, PHY_REG(776, 18), &phy_reg);
+		e1e_wphy(hw, PHY_REG(776, 18), phy_reg | 1);
+		/* Enable loopback on the PHY */
+		e1e_wphy(hw, I82577_PHY_LBK_CTRL, 0x8001);
+		break;
+	default:
+		break;
+	}
+
+	/* force 1000, set loopback */
+	e1e_wphy(hw, MII_BMCR, 0x4140);
+	msleep(250);
+
+	/* Now set up the MAC to the same speed/duplex as the PHY. */
+	ctrl_reg = er32(CTRL);
+	ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+	ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+		     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+		     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+		     E1000_CTRL_FD);	 /* Force Duplex to FULL */
+
+	if (adapter->flags & FLAG_IS_ICH)
+		ctrl_reg |= E1000_CTRL_SLU;	/* Set Link Up */
+
+	if (hw->phy.media_type == e1000_media_type_copper &&
+	    hw->phy.type == e1000_phy_m88) {
+		ctrl_reg |= E1000_CTRL_ILOS;	/* Invert Loss of Signal */
+	} else {
+		/* Set the ILOS bit on the fiber Nic if half duplex link is
+		 * detected.
+		 */
+		if ((er32(STATUS) & E1000_STATUS_FD) == 0)
+			ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
+	}
+
+	ew32(CTRL, ctrl_reg);
+
+	/* Disable the receiver on the PHY so when a cable is plugged in, the
+	 * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+	 */
+	if (hw->phy.type == e1000_phy_m88)
+		e1000_phy_disable_receiver(adapter);
+
+	usleep_range(500, 1000);
+
+	return 0;
+}
+
+static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl = er32(CTRL);
+	int link;
+
+	/* special requirements for 82571/82572 fiber adapters */
+
+	/* jump through hoops to make sure link is up because serdes
+	 * link is hardwired up
+	 */
+	ctrl |= E1000_CTRL_SLU;
+	ew32(CTRL, ctrl);
+
+	/* disable autoneg */
+	ctrl = er32(TXCW);
+	ctrl &= ~(1 << 31);
+	ew32(TXCW, ctrl);
+
+	link = (er32(STATUS) & E1000_STATUS_LU);
+
+	if (!link) {
+		/* set invert loss of signal */
+		ctrl = er32(CTRL);
+		ctrl |= E1000_CTRL_ILOS;
+		ew32(CTRL, ctrl);
+	}
+
+	/* special write to serdes control register to enable SerDes analog
+	 * loopback
+	 */
+	ew32(SCTL, E1000_SCTL_ENABLE_SERDES_LOOPBACK);
+	e1e_flush();
+	usleep_range(10000, 20000);
+
+	return 0;
+}
+
+/* only call this for fiber/serdes connections to es2lan */
+static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrlext = er32(CTRL_EXT);
+	u32 ctrl = er32(CTRL);
+
+	/* save CTRL_EXT to restore later, reuse an empty variable (unused
+	 * on mac_type 80003es2lan)
+	 */
+	adapter->tx_fifo_head = ctrlext;
+
+	/* clear the serdes mode bits, putting the device into mac loopback */
+	ctrlext &= ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+	ew32(CTRL_EXT, ctrlext);
+
+	/* force speed to 1000/FD, link up */
+	ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+	ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX |
+		 E1000_CTRL_SPD_1000 | E1000_CTRL_FD);
+	ew32(CTRL, ctrl);
+
+	/* set mac loopback */
+	ctrl = er32(RCTL);
+	ctrl |= E1000_RCTL_LBM_MAC;
+	ew32(RCTL, ctrl);
+
+	/* set testing mode parameters (no need to reset later) */
+#define KMRNCTRLSTA_OPMODE (0x1F << 16)
+#define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582
+	ew32(KMRNCTRLSTA,
+	     (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII));
+
+	return 0;
+}
+
+static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl;
+
+	if (hw->phy.media_type == e1000_media_type_fiber ||
+	    hw->phy.media_type == e1000_media_type_internal_serdes) {
+		switch (hw->mac.type) {
+		case e1000_80003es2lan:
+			return e1000_set_es2lan_mac_loopback(adapter);
+		case e1000_82571:
+		case e1000_82572:
+			return e1000_set_82571_fiber_loopback(adapter);
+		default:
+			rctl = er32(RCTL);
+			rctl |= E1000_RCTL_LBM_TCVR;
+			ew32(RCTL, rctl);
+			return 0;
+		}
+	} else if (hw->phy.media_type == e1000_media_type_copper) {
+		return e1000_integrated_phy_loopback(adapter);
+	}
+
+	return 7;
+}
+
+static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl;
+	u16 phy_reg;
+
+	rctl = er32(RCTL);
+	rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+	ew32(RCTL, rctl);
+
+	switch (hw->mac.type) {
+	case e1000_80003es2lan:
+		if (hw->phy.media_type == e1000_media_type_fiber ||
+		    hw->phy.media_type == e1000_media_type_internal_serdes) {
+			/* restore CTRL_EXT, stealing space from tx_fifo_head */
+			ew32(CTRL_EXT, adapter->tx_fifo_head);
+			adapter->tx_fifo_head = 0;
+		}
+		/* fall through */
+	case e1000_82571:
+	case e1000_82572:
+		if (hw->phy.media_type == e1000_media_type_fiber ||
+		    hw->phy.media_type == e1000_media_type_internal_serdes) {
+			ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+			e1e_flush();
+			usleep_range(10000, 20000);
+			break;
+		}
+		/* Fall Through */
+	default:
+		hw->mac.autoneg = 1;
+		if (hw->phy.type == e1000_phy_gg82563)
+			e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180);
+		e1e_rphy(hw, MII_BMCR, &phy_reg);
+		if (phy_reg & BMCR_LOOPBACK) {
+			phy_reg &= ~BMCR_LOOPBACK;
+			e1e_wphy(hw, MII_BMCR, phy_reg);
+			if (hw->phy.ops.commit)
+				hw->phy.ops.commit(hw);
+		}
+		break;
+	}
+}
+
+static void e1000_create_lbtest_frame(struct sk_buff *skb,
+				      unsigned int frame_size)
+{
+	memset(skb->data, 0xFF, frame_size);
+	frame_size &= ~1;
+	memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+	memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+	memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+static int e1000_check_lbtest_frame(struct sk_buff *skb,
+				    unsigned int frame_size)
+{
+	frame_size &= ~1;
+	if (*(skb->data + 3) == 0xFF)
+		if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+		    (*(skb->data + frame_size / 2 + 12) == 0xAF))
+			return 0;
+	return 13;
+}
+
+static int e1000_run_loopback_test(struct e1000_adapter *adapter)
+{
+	struct e1000_ring *tx_ring = &adapter->test_tx_ring;
+	struct e1000_ring *rx_ring = &adapter->test_rx_ring;
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_buffer *buffer_info;
+	int i, j, k, l;
+	int lc;
+	int good_cnt;
+	int ret_val = 0;
+	unsigned long time;
+
+	ew32(RDT(0), rx_ring->count - 1);
+
+	/* Calculate the loop count based on the largest descriptor ring
+	 * The idea is to wrap the largest ring a number of times using 64
+	 * send/receive pairs during each loop
+	 */
+
+	if (rx_ring->count <= tx_ring->count)
+		lc = ((tx_ring->count / 64) * 2) + 1;
+	else
+		lc = ((rx_ring->count / 64) * 2) + 1;
+
+	k = 0;
+	l = 0;
+	/* loop count loop */
+	for (j = 0; j <= lc; j++) {
+		/* send the packets */
+		for (i = 0; i < 64; i++) {
+			buffer_info = &tx_ring->buffer_info[k];
+
+			e1000_create_lbtest_frame(buffer_info->skb, 1024);
+			dma_sync_single_for_device(&pdev->dev,
+						   buffer_info->dma,
+						   buffer_info->length,
+						   DMA_TO_DEVICE);
+			k++;
+			if (k == tx_ring->count)
+				k = 0;
+		}
+		ew32(TDT(0), k);
+		e1e_flush();
+		msleep(200);
+		time = jiffies;	/* set the start time for the receive */
+		good_cnt = 0;
+		/* receive the sent packets */
+		do {
+			buffer_info = &rx_ring->buffer_info[l];
+
+			dma_sync_single_for_cpu(&pdev->dev,
+						buffer_info->dma, 2048,
+						DMA_FROM_DEVICE);
+
+			ret_val = e1000_check_lbtest_frame(buffer_info->skb,
+							   1024);
+			if (!ret_val)
+				good_cnt++;
+			l++;
+			if (l == rx_ring->count)
+				l = 0;
+			/* time + 20 msecs (200 msecs on 2.4) is more than
+			 * enough time to complete the receives, if it's
+			 * exceeded, break and error off
+			 */
+		} while ((good_cnt < 64) && !time_after(jiffies, time + 20));
+		if (good_cnt != 64) {
+			ret_val = 13;	/* ret_val is the same as mis-compare */
+			break;
+		}
+		if (time_after(jiffies, time + 20)) {
+			ret_val = 14;	/* error code for time out error */
+			break;
+		}
+	}
+	return ret_val;
+}
+
+static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	/* PHY loopback cannot be performed if SoL/IDER sessions are active */
+	if (hw->phy.ops.check_reset_block &&
+	    hw->phy.ops.check_reset_block(hw)) {
+		e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
+		*data = 0;
+		goto out;
+	}
+
+	*data = e1000_setup_desc_rings(adapter);
+	if (*data)
+		goto out;
+
+	*data = e1000_setup_loopback_test(adapter);
+	if (*data)
+		goto err_loopback;
+
+	*data = e1000_run_loopback_test(adapter);
+	e1000_loopback_cleanup(adapter);
+
+err_loopback:
+	e1000_free_desc_rings(adapter);
+out:
+	return *data;
+}
+
+static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	*data = 0;
+	if (hw->phy.media_type == e1000_media_type_internal_serdes) {
+		int i = 0;
+
+		hw->mac.serdes_has_link = false;
+
+		/* On some blade server designs, link establishment
+		 * could take as long as 2-3 minutes
+		 */
+		do {
+			hw->mac.ops.check_for_link(hw);
+			if (hw->mac.serdes_has_link)
+				return *data;
+			msleep(20);
+		} while (i++ < 3750);
+
+		*data = 1;
+	} else {
+		hw->mac.ops.check_for_link(hw);
+		if (hw->mac.autoneg)
+			/* On some Phy/switch combinations, link establishment
+			 * can take a few seconds more than expected.
+			 */
+			msleep_interruptible(5000);
+
+		if (!(er32(STATUS) & E1000_STATUS_LU))
+			*data = 1;
+	}
+	return *data;
+}
+
+static int e1000e_get_sset_count(struct net_device __always_unused *netdev,
+				 int sset)
+{
+	switch (sset) {
+	case ETH_SS_TEST:
+		return E1000_TEST_LEN;
+	case ETH_SS_STATS:
+		return E1000_STATS_LEN;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void e1000_diag_test(struct net_device *netdev,
+			    struct ethtool_test *eth_test, u64 *data)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	u16 autoneg_advertised;
+	u8 forced_speed_duplex;
+	u8 autoneg;
+	bool if_running = netif_running(netdev);
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	set_bit(__E1000_TESTING, &adapter->state);
+
+	if (!if_running) {
+		/* Get control of and reset hardware */
+		if (adapter->flags & FLAG_HAS_AMT)
+			e1000e_get_hw_control(adapter);
+
+		e1000e_power_up_phy(adapter);
+
+		adapter->hw.phy.autoneg_wait_to_complete = 1;
+		e1000e_reset(adapter);
+		adapter->hw.phy.autoneg_wait_to_complete = 0;
+	}
+
+	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+		/* Offline tests */
+
+		/* save speed, duplex, autoneg settings */
+		autoneg_advertised = adapter->hw.phy.autoneg_advertised;
+		forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
+		autoneg = adapter->hw.mac.autoneg;
+
+		e_info("offline testing starting\n");
+
+		if (if_running)
+			/* indicate we're in test mode */
+			dev_close(netdev);
+
+		if (e1000_reg_test(adapter, &data[0]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		e1000e_reset(adapter);
+		if (e1000_eeprom_test(adapter, &data[1]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		e1000e_reset(adapter);
+		if (e1000_intr_test(adapter, &data[2]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		e1000e_reset(adapter);
+		if (e1000_loopback_test(adapter, &data[3]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		/* force this routine to wait until autoneg complete/timeout */
+		adapter->hw.phy.autoneg_wait_to_complete = 1;
+		e1000e_reset(adapter);
+		adapter->hw.phy.autoneg_wait_to_complete = 0;
+
+		if (e1000_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		/* restore speed, duplex, autoneg settings */
+		adapter->hw.phy.autoneg_advertised = autoneg_advertised;
+		adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
+		adapter->hw.mac.autoneg = autoneg;
+		e1000e_reset(adapter);
+
+		clear_bit(__E1000_TESTING, &adapter->state);
+		if (if_running)
+			dev_open(netdev);
+	} else {
+		/* Online tests */
+
+		e_info("online testing starting\n");
+
+		/* register, eeprom, intr and loopback tests not run online */
+		data[0] = 0;
+		data[1] = 0;
+		data[2] = 0;
+		data[3] = 0;
+
+		if (e1000_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		clear_bit(__E1000_TESTING, &adapter->state);
+	}
+
+	if (!if_running) {
+		e1000e_reset(adapter);
+
+		if (adapter->flags & FLAG_HAS_AMT)
+			e1000e_release_hw_control(adapter);
+	}
+
+	msleep_interruptible(4 * 1000);
+
+	pm_runtime_put_sync(netdev->dev.parent);
+}
+
+static void e1000_get_wol(struct net_device *netdev,
+			  struct ethtool_wolinfo *wol)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	wol->supported = 0;
+	wol->wolopts = 0;
+
+	if (!(adapter->flags & FLAG_HAS_WOL) ||
+	    !device_can_wakeup(&adapter->pdev->dev))
+		return;
+
+	wol->supported = WAKE_UCAST | WAKE_MCAST |
+	    WAKE_BCAST | WAKE_MAGIC | WAKE_PHY;
+
+	/* apply any specific unsupported masks here */
+	if (adapter->flags & FLAG_NO_WAKE_UCAST) {
+		wol->supported &= ~WAKE_UCAST;
+
+		if (adapter->wol & E1000_WUFC_EX)
+			e_err("Interface does not support directed (unicast) frame wake-up packets\n");
+	}
+
+	if (adapter->wol & E1000_WUFC_EX)
+		wol->wolopts |= WAKE_UCAST;
+	if (adapter->wol & E1000_WUFC_MC)
+		wol->wolopts |= WAKE_MCAST;
+	if (adapter->wol & E1000_WUFC_BC)
+		wol->wolopts |= WAKE_BCAST;
+	if (adapter->wol & E1000_WUFC_MAG)
+		wol->wolopts |= WAKE_MAGIC;
+	if (adapter->wol & E1000_WUFC_LNKC)
+		wol->wolopts |= WAKE_PHY;
+}
+
+static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	if (!(adapter->flags & FLAG_HAS_WOL) ||
+	    !device_can_wakeup(&adapter->pdev->dev) ||
+	    (wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+			      WAKE_MAGIC | WAKE_PHY)))
+		return -EOPNOTSUPP;
+
+	/* these settings will always override what we currently have */
+	adapter->wol = 0;
+
+	if (wol->wolopts & WAKE_UCAST)
+		adapter->wol |= E1000_WUFC_EX;
+	if (wol->wolopts & WAKE_MCAST)
+		adapter->wol |= E1000_WUFC_MC;
+	if (wol->wolopts & WAKE_BCAST)
+		adapter->wol |= E1000_WUFC_BC;
+	if (wol->wolopts & WAKE_MAGIC)
+		adapter->wol |= E1000_WUFC_MAG;
+	if (wol->wolopts & WAKE_PHY)
+		adapter->wol |= E1000_WUFC_LNKC;
+
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+	return 0;
+}
+
+static int e1000_set_phys_id(struct net_device *netdev,
+			     enum ethtool_phys_id_state state)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		pm_runtime_get_sync(netdev->dev.parent);
+
+		if (!hw->mac.ops.blink_led)
+			return 2;	/* cycle on/off twice per second */
+
+		hw->mac.ops.blink_led(hw);
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
+		if (hw->phy.type == e1000_phy_ife)
+			e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+		hw->mac.ops.led_off(hw);
+		hw->mac.ops.cleanup_led(hw);
+		pm_runtime_put_sync(netdev->dev.parent);
+		break;
+
+	case ETHTOOL_ID_ON:
+		hw->mac.ops.led_on(hw);
+		break;
+
+	case ETHTOOL_ID_OFF:
+		hw->mac.ops.led_off(hw);
+		break;
+	}
+
+	return 0;
+}
+
+static int e1000_get_coalesce(struct net_device *netdev,
+			      struct ethtool_coalesce *ec)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	if (adapter->itr_setting <= 4)
+		ec->rx_coalesce_usecs = adapter->itr_setting;
+	else
+		ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
+
+	return 0;
+}
+
+static int e1000_set_coalesce(struct net_device *netdev,
+			      struct ethtool_coalesce *ec)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
+	    ((ec->rx_coalesce_usecs > 4) &&
+	     (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
+	    (ec->rx_coalesce_usecs == 2))
+		return -EINVAL;
+
+	if (ec->rx_coalesce_usecs == 4) {
+		adapter->itr_setting = 4;
+		adapter->itr = adapter->itr_setting;
+	} else if (ec->rx_coalesce_usecs <= 3) {
+		adapter->itr = 20000;
+		adapter->itr_setting = ec->rx_coalesce_usecs;
+	} else {
+		adapter->itr = (1000000 / ec->rx_coalesce_usecs);
+		adapter->itr_setting = adapter->itr & ~3;
+	}
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	if (adapter->itr_setting != 0)
+		e1000e_write_itr(adapter, adapter->itr);
+	else
+		e1000e_write_itr(adapter, 0);
+
+	pm_runtime_put_sync(netdev->dev.parent);
+
+	return 0;
+}
+
+static int e1000_nway_reset(struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	if (!netif_running(netdev))
+		return -EAGAIN;
+
+	if (!adapter->hw.mac.autoneg)
+		return -EINVAL;
+
+	pm_runtime_get_sync(netdev->dev.parent);
+	e1000e_reinit_locked(adapter);
+	pm_runtime_put_sync(netdev->dev.parent);
+
+	return 0;
+}
+
+static void e1000_get_ethtool_stats(struct net_device *netdev,
+				    struct ethtool_stats __always_unused *stats,
+				    u64 *data)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct rtnl_link_stats64 net_stats;
+	int i;
+	char *p = NULL;
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	e1000e_get_stats64(netdev, &net_stats);
+
+	pm_runtime_put_sync(netdev->dev.parent);
+
+	for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+		switch (e1000_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *)&net_stats +
+			    e1000_gstrings_stats[i].stat_offset;
+			break;
+		case E1000_STATS:
+			p = (char *)adapter +
+			    e1000_gstrings_stats[i].stat_offset;
+			break;
+		default:
+			data[i] = 0;
+			continue;
+		}
+
+		data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
+			   sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+	}
+}
+
+static void e1000_get_strings(struct net_device __always_unused *netdev,
+			      u32 stringset, u8 *data)
+{
+	u8 *p = data;
+	int i;
+
+	switch (stringset) {
+	case ETH_SS_TEST:
+		memcpy(data, e1000_gstrings_test, sizeof(e1000_gstrings_test));
+		break;
+	case ETH_SS_STATS:
+		for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+			memcpy(p, e1000_gstrings_stats[i].stat_string,
+			       ETH_GSTRING_LEN);
+			p += ETH_GSTRING_LEN;
+		}
+		break;
+	}
+}
+
+static int e1000_get_rxnfc(struct net_device *netdev,
+			   struct ethtool_rxnfc *info,
+			   u32 __always_unused *rule_locs)
+{
+	info->data = 0;
+
+	switch (info->cmd) {
+	case ETHTOOL_GRXFH: {
+		struct e1000_adapter *adapter = netdev_priv(netdev);
+		struct e1000_hw *hw = &adapter->hw;
+		u32 mrqc;
+
+		pm_runtime_get_sync(netdev->dev.parent);
+		mrqc = er32(MRQC);
+		pm_runtime_put_sync(netdev->dev.parent);
+
+		if (!(mrqc & E1000_MRQC_RSS_FIELD_MASK))
+			return 0;
+
+		switch (info->flow_type) {
+		case TCP_V4_FLOW:
+			if (mrqc & E1000_MRQC_RSS_FIELD_IPV4_TCP)
+				info->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+			/* fall through */
+		case UDP_V4_FLOW:
+		case SCTP_V4_FLOW:
+		case AH_ESP_V4_FLOW:
+		case IPV4_FLOW:
+			if (mrqc & E1000_MRQC_RSS_FIELD_IPV4)
+				info->data |= RXH_IP_SRC | RXH_IP_DST;
+			break;
+		case TCP_V6_FLOW:
+			if (mrqc & E1000_MRQC_RSS_FIELD_IPV6_TCP)
+				info->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+			/* fall through */
+		case UDP_V6_FLOW:
+		case SCTP_V6_FLOW:
+		case AH_ESP_V6_FLOW:
+		case IPV6_FLOW:
+			if (mrqc & E1000_MRQC_RSS_FIELD_IPV6)
+				info->data |= RXH_IP_SRC | RXH_IP_DST;
+			break;
+		default:
+			break;
+		}
+		return 0;
+	}
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 cap_addr, lpa_addr, pcs_stat_addr, phy_data;
+	u32 ret_val;
+
+	if (!(adapter->flags2 & FLAG2_HAS_EEE))
+		return -EOPNOTSUPP;
+
+	switch (hw->phy.type) {
+	case e1000_phy_82579:
+		cap_addr = I82579_EEE_CAPABILITY;
+		lpa_addr = I82579_EEE_LP_ABILITY;
+		pcs_stat_addr = I82579_EEE_PCS_STATUS;
+		break;
+	case e1000_phy_i217:
+		cap_addr = I217_EEE_CAPABILITY;
+		lpa_addr = I217_EEE_LP_ABILITY;
+		pcs_stat_addr = I217_EEE_PCS_STATUS;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val) {
+		pm_runtime_put_sync(netdev->dev.parent);
+		return -EBUSY;
+	}
+
+	/* EEE Capability */
+	ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data);
+	if (ret_val)
+		goto release;
+	edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data);
+
+	/* EEE Advertised */
+	edata->advertised = mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
+
+	/* EEE Link Partner Advertised */
+	ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data);
+	if (ret_val)
+		goto release;
+	edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+
+	/* EEE PCS Status */
+	ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data);
+	if (ret_val)
+		goto release;
+	if (hw->phy.type == e1000_phy_82579)
+		phy_data <<= 8;
+
+	/* Result of the EEE auto negotiation - there is no register that
+	 * has the status of the EEE negotiation so do a best-guess based
+	 * on whether Tx or Rx LPI indications have been received.
+	 */
+	if (phy_data & (E1000_EEE_TX_LPI_RCVD | E1000_EEE_RX_LPI_RCVD))
+		edata->eee_active = true;
+
+	edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable;
+	edata->tx_lpi_enabled = true;
+	edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT;
+
+release:
+	hw->phy.ops.release(hw);
+	if (ret_val)
+		ret_val = -ENODATA;
+
+	pm_runtime_put_sync(netdev->dev.parent);
+
+	return ret_val;
+}
+
+static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct ethtool_eee eee_curr;
+	s32 ret_val;
+
+	ret_val = e1000e_get_eee(netdev, &eee_curr);
+	if (ret_val)
+		return ret_val;
+
+	if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) {
+		e_err("Setting EEE tx-lpi is not supported\n");
+		return -EINVAL;
+	}
+
+	if (eee_curr.tx_lpi_timer != edata->tx_lpi_timer) {
+		e_err("Setting EEE Tx LPI timer is not supported\n");
+		return -EINVAL;
+	}
+
+	if (edata->advertised & ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL)) {
+		e_err("EEE advertisement supports only 100TX and/or 1000T full-duplex\n");
+		return -EINVAL;
+	}
+
+	adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised);
+
+	hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	/* reset the link */
+	if (netif_running(netdev))
+		e1000e_reinit_locked(adapter);
+	else
+		e1000e_reset(adapter);
+
+	pm_runtime_put_sync(netdev->dev.parent);
+
+	return 0;
+}
+
+static int e1000e_get_ts_info(struct net_device *netdev,
+			      struct ethtool_ts_info *info)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	ethtool_op_get_ts_info(netdev, info);
+
+	if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+		return 0;
+
+	info->so_timestamping |= (SOF_TIMESTAMPING_TX_HARDWARE |
+				  SOF_TIMESTAMPING_RX_HARDWARE |
+				  SOF_TIMESTAMPING_RAW_HARDWARE);
+
+	info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON);
+
+	info->rx_filters = ((1 << HWTSTAMP_FILTER_NONE) |
+			    (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
+			    (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
+			    (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
+			    (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) |
+			    (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
+			    (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) |
+			    (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) |
+			    (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) |
+			    (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) |
+			    (1 << HWTSTAMP_FILTER_ALL));
+
+	if (adapter->ptp_clock)
+		info->phc_index = ptp_clock_index(adapter->ptp_clock);
+
+	return 0;
+}
+
+static const struct ethtool_ops e1000_ethtool_ops = {
+	.get_settings		= e1000_get_settings,
+	.set_settings		= e1000_set_settings,
+	.get_drvinfo		= e1000_get_drvinfo,
+	.get_regs_len		= e1000_get_regs_len,
+	.get_regs		= e1000_get_regs,
+	.get_wol		= e1000_get_wol,
+	.set_wol		= e1000_set_wol,
+	.get_msglevel		= e1000_get_msglevel,
+	.set_msglevel		= e1000_set_msglevel,
+	.nway_reset		= e1000_nway_reset,
+	.get_link		= ethtool_op_get_link,
+	.get_eeprom_len		= e1000_get_eeprom_len,
+	.get_eeprom		= e1000_get_eeprom,
+	.set_eeprom		= e1000_set_eeprom,
+	.get_ringparam		= e1000_get_ringparam,
+	.set_ringparam		= e1000_set_ringparam,
+	.get_pauseparam		= e1000_get_pauseparam,
+	.set_pauseparam		= e1000_set_pauseparam,
+	.self_test		= e1000_diag_test,
+	.get_strings		= e1000_get_strings,
+	.set_phys_id		= e1000_set_phys_id,
+	.get_ethtool_stats	= e1000_get_ethtool_stats,
+	.get_sset_count		= e1000e_get_sset_count,
+	.get_coalesce		= e1000_get_coalesce,
+	.set_coalesce		= e1000_set_coalesce,
+	.get_rxnfc		= e1000_get_rxnfc,
+	.get_ts_info		= e1000e_get_ts_info,
+	.get_eee		= e1000e_get_eee,
+	.set_eee		= e1000e_set_eee,
+};
+
+void e1000e_set_ethtool_ops(struct net_device *netdev)
+{
+	netdev->ethtool_ops = &e1000_ethtool_ops;
+}
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
new file mode 100644
index 000000000..19e8c487d
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -0,0 +1,698 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include "regs.h"
+#include "defines.h"
+
+struct e1000_hw;
+
+#define E1000_DEV_ID_82571EB_COPPER		0x105E
+#define E1000_DEV_ID_82571EB_FIBER		0x105F
+#define E1000_DEV_ID_82571EB_SERDES		0x1060
+#define E1000_DEV_ID_82571EB_QUAD_COPPER	0x10A4
+#define E1000_DEV_ID_82571PT_QUAD_COPPER	0x10D5
+#define E1000_DEV_ID_82571EB_QUAD_FIBER		0x10A5
+#define E1000_DEV_ID_82571EB_QUAD_COPPER_LP	0x10BC
+#define E1000_DEV_ID_82571EB_SERDES_DUAL	0x10D9
+#define E1000_DEV_ID_82571EB_SERDES_QUAD	0x10DA
+#define E1000_DEV_ID_82572EI_COPPER		0x107D
+#define E1000_DEV_ID_82572EI_FIBER		0x107E
+#define E1000_DEV_ID_82572EI_SERDES		0x107F
+#define E1000_DEV_ID_82572EI			0x10B9
+#define E1000_DEV_ID_82573E			0x108B
+#define E1000_DEV_ID_82573E_IAMT		0x108C
+#define E1000_DEV_ID_82573L			0x109A
+#define E1000_DEV_ID_82574L			0x10D3
+#define E1000_DEV_ID_82574LA			0x10F6
+#define E1000_DEV_ID_82583V			0x150C
+#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT	0x1096
+#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT	0x1098
+#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT	0x10BA
+#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT	0x10BB
+#define E1000_DEV_ID_ICH8_82567V_3		0x1501
+#define E1000_DEV_ID_ICH8_IGP_M_AMT		0x1049
+#define E1000_DEV_ID_ICH8_IGP_AMT		0x104A
+#define E1000_DEV_ID_ICH8_IGP_C			0x104B
+#define E1000_DEV_ID_ICH8_IFE			0x104C
+#define E1000_DEV_ID_ICH8_IFE_GT		0x10C4
+#define E1000_DEV_ID_ICH8_IFE_G			0x10C5
+#define E1000_DEV_ID_ICH8_IGP_M			0x104D
+#define E1000_DEV_ID_ICH9_IGP_AMT		0x10BD
+#define E1000_DEV_ID_ICH9_BM			0x10E5
+#define E1000_DEV_ID_ICH9_IGP_M_AMT		0x10F5
+#define E1000_DEV_ID_ICH9_IGP_M			0x10BF
+#define E1000_DEV_ID_ICH9_IGP_M_V		0x10CB
+#define E1000_DEV_ID_ICH9_IGP_C			0x294C
+#define E1000_DEV_ID_ICH9_IFE			0x10C0
+#define E1000_DEV_ID_ICH9_IFE_GT		0x10C3
+#define E1000_DEV_ID_ICH9_IFE_G			0x10C2
+#define E1000_DEV_ID_ICH10_R_BM_LM		0x10CC
+#define E1000_DEV_ID_ICH10_R_BM_LF		0x10CD
+#define E1000_DEV_ID_ICH10_R_BM_V		0x10CE
+#define E1000_DEV_ID_ICH10_D_BM_LM		0x10DE
+#define E1000_DEV_ID_ICH10_D_BM_LF		0x10DF
+#define E1000_DEV_ID_ICH10_D_BM_V		0x1525
+#define E1000_DEV_ID_PCH_M_HV_LM		0x10EA
+#define E1000_DEV_ID_PCH_M_HV_LC		0x10EB
+#define E1000_DEV_ID_PCH_D_HV_DM		0x10EF
+#define E1000_DEV_ID_PCH_D_HV_DC		0x10F0
+#define E1000_DEV_ID_PCH2_LV_LM			0x1502
+#define E1000_DEV_ID_PCH2_LV_V			0x1503
+#define E1000_DEV_ID_PCH_LPT_I217_LM		0x153A
+#define E1000_DEV_ID_PCH_LPT_I217_V		0x153B
+#define E1000_DEV_ID_PCH_LPTLP_I218_LM		0x155A
+#define E1000_DEV_ID_PCH_LPTLP_I218_V		0x1559
+#define E1000_DEV_ID_PCH_I218_LM2		0x15A0
+#define E1000_DEV_ID_PCH_I218_V2		0x15A1
+#define E1000_DEV_ID_PCH_I218_LM3		0x15A2	/* Wildcat Point PCH */
+#define E1000_DEV_ID_PCH_I218_V3		0x15A3	/* Wildcat Point PCH */
+#define E1000_DEV_ID_PCH_SPT_I219_LM		0x156F	/* SPT PCH */
+#define E1000_DEV_ID_PCH_SPT_I219_V		0x1570	/* SPT PCH */
+#define E1000_DEV_ID_PCH_SPT_I219_LM2		0x15B7	/* SPT-H PCH */
+#define E1000_DEV_ID_PCH_SPT_I219_V2		0x15B8	/* SPT-H PCH */
+
+#define E1000_REVISION_4	4
+
+#define E1000_FUNC_1		1
+
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0	0
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1	3
+
+enum e1000_mac_type {
+	e1000_82571,
+	e1000_82572,
+	e1000_82573,
+	e1000_82574,
+	e1000_82583,
+	e1000_80003es2lan,
+	e1000_ich8lan,
+	e1000_ich9lan,
+	e1000_ich10lan,
+	e1000_pchlan,
+	e1000_pch2lan,
+	e1000_pch_lpt,
+	e1000_pch_spt,
+};
+
+enum e1000_media_type {
+	e1000_media_type_unknown = 0,
+	e1000_media_type_copper = 1,
+	e1000_media_type_fiber = 2,
+	e1000_media_type_internal_serdes = 3,
+	e1000_num_media_types
+};
+
+enum e1000_nvm_type {
+	e1000_nvm_unknown = 0,
+	e1000_nvm_none,
+	e1000_nvm_eeprom_spi,
+	e1000_nvm_flash_hw,
+	e1000_nvm_flash_sw
+};
+
+enum e1000_nvm_override {
+	e1000_nvm_override_none = 0,
+	e1000_nvm_override_spi_small,
+	e1000_nvm_override_spi_large
+};
+
+enum e1000_phy_type {
+	e1000_phy_unknown = 0,
+	e1000_phy_none,
+	e1000_phy_m88,
+	e1000_phy_igp,
+	e1000_phy_igp_2,
+	e1000_phy_gg82563,
+	e1000_phy_igp_3,
+	e1000_phy_ife,
+	e1000_phy_bm,
+	e1000_phy_82578,
+	e1000_phy_82577,
+	e1000_phy_82579,
+	e1000_phy_i217,
+};
+
+enum e1000_bus_width {
+	e1000_bus_width_unknown = 0,
+	e1000_bus_width_pcie_x1,
+	e1000_bus_width_pcie_x2,
+	e1000_bus_width_pcie_x4 = 4,
+	e1000_bus_width_pcie_x8 = 8,
+	e1000_bus_width_32,
+	e1000_bus_width_64,
+	e1000_bus_width_reserved
+};
+
+enum e1000_1000t_rx_status {
+	e1000_1000t_rx_status_not_ok = 0,
+	e1000_1000t_rx_status_ok,
+	e1000_1000t_rx_status_undefined = 0xFF
+};
+
+enum e1000_rev_polarity {
+	e1000_rev_polarity_normal = 0,
+	e1000_rev_polarity_reversed,
+	e1000_rev_polarity_undefined = 0xFF
+};
+
+enum e1000_fc_mode {
+	e1000_fc_none = 0,
+	e1000_fc_rx_pause,
+	e1000_fc_tx_pause,
+	e1000_fc_full,
+	e1000_fc_default = 0xFF
+};
+
+enum e1000_ms_type {
+	e1000_ms_hw_default = 0,
+	e1000_ms_force_master,
+	e1000_ms_force_slave,
+	e1000_ms_auto
+};
+
+enum e1000_smart_speed {
+	e1000_smart_speed_default = 0,
+	e1000_smart_speed_on,
+	e1000_smart_speed_off
+};
+
+enum e1000_serdes_link_state {
+	e1000_serdes_link_down = 0,
+	e1000_serdes_link_autoneg_progress,
+	e1000_serdes_link_autoneg_complete,
+	e1000_serdes_link_forced_up
+};
+
+/* Receive Descriptor - Extended */
+union e1000_rx_desc_extended {
+	struct {
+		__le64 buffer_addr;
+		__le64 reserved;
+	} read;
+	struct {
+		struct {
+			__le32 mrq;	      /* Multiple Rx Queues */
+			union {
+				__le32 rss;	    /* RSS Hash */
+				struct {
+					__le16 ip_id;  /* IP id */
+					__le16 csum;   /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error;     /* ext status/error */
+			__le16 length;
+			__le16 vlan;	     /* VLAN tag */
+		} upper;
+	} wb;  /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+
+/* Number of packet split data buffers (not including the header buffer) */
+#define PS_PAGE_BUFFERS	(MAX_PS_BUFFERS - 1)
+
+/* Receive Descriptor - Packet Split */
+union e1000_rx_desc_packet_split {
+	struct {
+		/* one buffer for protocol header(s), three data buffers */
+		__le64 buffer_addr[MAX_PS_BUFFERS];
+	} read;
+	struct {
+		struct {
+			__le32 mrq;	      /* Multiple Rx Queues */
+			union {
+				__le32 rss;	      /* RSS Hash */
+				struct {
+					__le16 ip_id;    /* IP id */
+					__le16 csum;     /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error;     /* ext status/error */
+			__le16 length0;	  /* length of buffer 0 */
+			__le16 vlan;	     /* VLAN tag */
+		} middle;
+		struct {
+			__le16 header_status;
+			/* length of buffers 1-3 */
+			__le16 length[PS_PAGE_BUFFERS];
+		} upper;
+		__le64 reserved;
+	} wb; /* writeback */
+};
+
+/* Transmit Descriptor */
+struct e1000_tx_desc {
+	__le64 buffer_addr;      /* Address of the descriptor's data buffer */
+	union {
+		__le32 data;
+		struct {
+			__le16 length;    /* Data buffer length */
+			u8 cso;	/* Checksum offset */
+			u8 cmd;	/* Descriptor control */
+		} flags;
+	} lower;
+	union {
+		__le32 data;
+		struct {
+			u8 status;     /* Descriptor status */
+			u8 css;	/* Checksum start */
+			__le16 special;
+		} fields;
+	} upper;
+};
+
+/* Offload Context Descriptor */
+struct e1000_context_desc {
+	union {
+		__le32 ip_config;
+		struct {
+			u8 ipcss;      /* IP checksum start */
+			u8 ipcso;      /* IP checksum offset */
+			__le16 ipcse;     /* IP checksum end */
+		} ip_fields;
+	} lower_setup;
+	union {
+		__le32 tcp_config;
+		struct {
+			u8 tucss;      /* TCP checksum start */
+			u8 tucso;      /* TCP checksum offset */
+			__le16 tucse;     /* TCP checksum end */
+		} tcp_fields;
+	} upper_setup;
+	__le32 cmd_and_length;
+	union {
+		__le32 data;
+		struct {
+			u8 status;     /* Descriptor status */
+			u8 hdr_len;    /* Header length */
+			__le16 mss;       /* Maximum segment size */
+		} fields;
+	} tcp_seg_setup;
+};
+
+/* Offload data descriptor */
+struct e1000_data_desc {
+	__le64 buffer_addr;   /* Address of the descriptor's buffer address */
+	union {
+		__le32 data;
+		struct {
+			__le16 length;    /* Data buffer length */
+			u8 typ_len_ext;
+			u8 cmd;
+		} flags;
+	} lower;
+	union {
+		__le32 data;
+		struct {
+			u8 status;     /* Descriptor status */
+			u8 popts;      /* Packet Options */
+			__le16 special;
+		} fields;
+	} upper;
+};
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+	u64 crcerrs;
+	u64 algnerrc;
+	u64 symerrs;
+	u64 rxerrc;
+	u64 mpc;
+	u64 scc;
+	u64 ecol;
+	u64 mcc;
+	u64 latecol;
+	u64 colc;
+	u64 dc;
+	u64 tncrs;
+	u64 sec;
+	u64 cexterr;
+	u64 rlec;
+	u64 xonrxc;
+	u64 xontxc;
+	u64 xoffrxc;
+	u64 xofftxc;
+	u64 fcruc;
+	u64 prc64;
+	u64 prc127;
+	u64 prc255;
+	u64 prc511;
+	u64 prc1023;
+	u64 prc1522;
+	u64 gprc;
+	u64 bprc;
+	u64 mprc;
+	u64 gptc;
+	u64 gorc;
+	u64 gotc;
+	u64 rnbc;
+	u64 ruc;
+	u64 rfc;
+	u64 roc;
+	u64 rjc;
+	u64 mgprc;
+	u64 mgpdc;
+	u64 mgptc;
+	u64 tor;
+	u64 tot;
+	u64 tpr;
+	u64 tpt;
+	u64 ptc64;
+	u64 ptc127;
+	u64 ptc255;
+	u64 ptc511;
+	u64 ptc1023;
+	u64 ptc1522;
+	u64 mptc;
+	u64 bptc;
+	u64 tsctc;
+	u64 tsctfc;
+	u64 iac;
+	u64 icrxptc;
+	u64 icrxatc;
+	u64 ictxptc;
+	u64 ictxatc;
+	u64 ictxqec;
+	u64 ictxqmtc;
+	u64 icrxdmtc;
+	u64 icrxoc;
+};
+
+struct e1000_phy_stats {
+	u32 idle_errors;
+	u32 receive_errors;
+};
+
+struct e1000_host_mng_dhcp_cookie {
+	u32 signature;
+	u8 status;
+	u8 reserved0;
+	u16 vlan_id;
+	u32 reserved1;
+	u16 reserved2;
+	u8 reserved3;
+	u8 checksum;
+};
+
+/* Host Interface "Rev 1" */
+struct e1000_host_command_header {
+	u8 command_id;
+	u8 command_length;
+	u8 command_options;
+	u8 checksum;
+};
+
+#define E1000_HI_MAX_DATA_LENGTH	252
+struct e1000_host_command_info {
+	struct e1000_host_command_header command_header;
+	u8 command_data[E1000_HI_MAX_DATA_LENGTH];
+};
+
+/* Host Interface "Rev 2" */
+struct e1000_host_mng_command_header {
+	u8 command_id;
+	u8 checksum;
+	u16 reserved1;
+	u16 reserved2;
+	u16 command_length;
+};
+
+#define E1000_HI_MAX_MNG_DATA_LENGTH	0x6F8
+struct e1000_host_mng_command_info {
+	struct e1000_host_mng_command_header command_header;
+	u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
+};
+
+#include "mac.h"
+#include "phy.h"
+#include "nvm.h"
+#include "manage.h"
+
+/* Function pointers for the MAC. */
+struct e1000_mac_operations {
+	s32  (*id_led_init)(struct e1000_hw *);
+	s32  (*blink_led)(struct e1000_hw *);
+	bool (*check_mng_mode)(struct e1000_hw *);
+	s32  (*check_for_link)(struct e1000_hw *);
+	s32  (*cleanup_led)(struct e1000_hw *);
+	void (*clear_hw_cntrs)(struct e1000_hw *);
+	void (*clear_vfta)(struct e1000_hw *);
+	s32  (*get_bus_info)(struct e1000_hw *);
+	void (*set_lan_id)(struct e1000_hw *);
+	s32  (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
+	s32  (*led_on)(struct e1000_hw *);
+	s32  (*led_off)(struct e1000_hw *);
+	void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32);
+	s32  (*reset_hw)(struct e1000_hw *);
+	s32  (*init_hw)(struct e1000_hw *);
+	s32  (*setup_link)(struct e1000_hw *);
+	s32  (*setup_physical_interface)(struct e1000_hw *);
+	s32  (*setup_led)(struct e1000_hw *);
+	void (*write_vfta)(struct e1000_hw *, u32, u32);
+	void (*config_collision_dist)(struct e1000_hw *);
+	int  (*rar_set)(struct e1000_hw *, u8 *, u32);
+	s32  (*read_mac_addr)(struct e1000_hw *);
+	u32  (*rar_get_count)(struct e1000_hw *);
+};
+
+/* When to use various PHY register access functions:
+ *
+ *                 Func   Caller
+ *   Function      Does   Does    When to use
+ *   ~~~~~~~~~~~~  ~~~~~  ~~~~~~  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *   X_reg         L,P,A  n/a     for simple PHY reg accesses
+ *   X_reg_locked  P,A    L       for multiple accesses of different regs
+ *                                on different pages
+ *   X_reg_page    A      L,P     for multiple accesses of different regs
+ *                                on the same page
+ *
+ * Where X=[read|write], L=locking, P=sets page, A=register access
+ *
+ */
+struct e1000_phy_operations {
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*cfg_on_link_up)(struct e1000_hw *);
+	s32  (*check_polarity)(struct e1000_hw *);
+	s32  (*check_reset_block)(struct e1000_hw *);
+	s32  (*commit)(struct e1000_hw *);
+	s32  (*force_speed_duplex)(struct e1000_hw *);
+	s32  (*get_cfg_done)(struct e1000_hw *hw);
+	s32  (*get_cable_length)(struct e1000_hw *);
+	s32  (*get_info)(struct e1000_hw *);
+	s32  (*set_page)(struct e1000_hw *, u16);
+	s32  (*read_reg)(struct e1000_hw *, u32, u16 *);
+	s32  (*read_reg_locked)(struct e1000_hw *, u32, u16 *);
+	s32  (*read_reg_page)(struct e1000_hw *, u32, u16 *);
+	void (*release)(struct e1000_hw *);
+	s32  (*reset)(struct e1000_hw *);
+	s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
+	s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
+	s32  (*write_reg)(struct e1000_hw *, u32, u16);
+	s32  (*write_reg_locked)(struct e1000_hw *, u32, u16);
+	s32  (*write_reg_page)(struct e1000_hw *, u32, u16);
+	void (*power_up)(struct e1000_hw *);
+	void (*power_down)(struct e1000_hw *);
+};
+
+/* Function pointers for the NVM. */
+struct e1000_nvm_operations {
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*read)(struct e1000_hw *, u16, u16, u16 *);
+	void (*release)(struct e1000_hw *);
+	void (*reload)(struct e1000_hw *);
+	s32  (*update)(struct e1000_hw *);
+	s32  (*valid_led_default)(struct e1000_hw *, u16 *);
+	s32  (*validate)(struct e1000_hw *);
+	s32  (*write)(struct e1000_hw *, u16, u16, u16 *);
+};
+
+struct e1000_mac_info {
+	struct e1000_mac_operations ops;
+	u8 addr[ETH_ALEN];
+	u8 perm_addr[ETH_ALEN];
+
+	enum e1000_mac_type type;
+
+	u32 collision_delta;
+	u32 ledctl_default;
+	u32 ledctl_mode1;
+	u32 ledctl_mode2;
+	u32 mc_filter_type;
+	u32 tx_packet_delta;
+	u32 txcw;
+
+	u16 current_ifs_val;
+	u16 ifs_max_val;
+	u16 ifs_min_val;
+	u16 ifs_ratio;
+	u16 ifs_step_size;
+	u16 mta_reg_count;
+
+	/* Maximum size of the MTA register table in all supported adapters */
+#define MAX_MTA_REG 128
+	u32 mta_shadow[MAX_MTA_REG];
+	u16 rar_entry_count;
+
+	u8 forced_speed_duplex;
+
+	bool adaptive_ifs;
+	bool has_fwsm;
+	bool arc_subsystem_valid;
+	bool autoneg;
+	bool autoneg_failed;
+	bool get_link_status;
+	bool in_ifs_mode;
+	bool serdes_has_link;
+	bool tx_pkt_filtering;
+	enum e1000_serdes_link_state serdes_link_state;
+};
+
+struct e1000_phy_info {
+	struct e1000_phy_operations ops;
+
+	enum e1000_phy_type type;
+
+	enum e1000_1000t_rx_status local_rx;
+	enum e1000_1000t_rx_status remote_rx;
+	enum e1000_ms_type ms_type;
+	enum e1000_ms_type original_ms_type;
+	enum e1000_rev_polarity cable_polarity;
+	enum e1000_smart_speed smart_speed;
+
+	u32 addr;
+	u32 id;
+	u32 reset_delay_us;	/* in usec */
+	u32 revision;
+
+	enum e1000_media_type media_type;
+
+	u16 autoneg_advertised;
+	u16 autoneg_mask;
+	u16 cable_length;
+	u16 max_cable_length;
+	u16 min_cable_length;
+
+	u8 mdix;
+
+	bool disable_polarity_correction;
+	bool is_mdix;
+	bool polarity_correction;
+	bool speed_downgraded;
+	bool autoneg_wait_to_complete;
+};
+
+struct e1000_nvm_info {
+	struct e1000_nvm_operations ops;
+
+	enum e1000_nvm_type type;
+	enum e1000_nvm_override override;
+
+	u32 flash_bank_size;
+	u32 flash_base_addr;
+
+	u16 word_size;
+	u16 delay_usec;
+	u16 address_bits;
+	u16 opcode_bits;
+	u16 page_size;
+};
+
+struct e1000_bus_info {
+	enum e1000_bus_width width;
+
+	u16 func;
+};
+
+struct e1000_fc_info {
+	u32 high_water;          /* Flow control high-water mark */
+	u32 low_water;           /* Flow control low-water mark */
+	u16 pause_time;          /* Flow control pause timer */
+	u16 refresh_time;        /* Flow control refresh timer */
+	bool send_xon;           /* Flow control send XON */
+	bool strict_ieee;        /* Strict IEEE mode */
+	enum e1000_fc_mode current_mode; /* FC mode in effect */
+	enum e1000_fc_mode requested_mode; /* FC mode requested by caller */
+};
+
+struct e1000_dev_spec_82571 {
+	bool laa_is_present;
+	u32 smb_counter;
+};
+
+struct e1000_dev_spec_80003es2lan {
+	bool mdic_wa_enable;
+};
+
+struct e1000_shadow_ram {
+	u16 value;
+	bool modified;
+};
+
+#define E1000_ICH8_SHADOW_RAM_WORDS		2048
+
+/* I218 PHY Ultra Low Power (ULP) states */
+enum e1000_ulp_state {
+	e1000_ulp_state_unknown,
+	e1000_ulp_state_off,
+	e1000_ulp_state_on,
+};
+
+struct e1000_dev_spec_ich8lan {
+	bool kmrn_lock_loss_workaround_enabled;
+	struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
+	bool nvm_k1_enabled;
+	bool eee_disable;
+	u16 eee_lp_ability;
+	enum e1000_ulp_state ulp_state;
+};
+
+struct e1000_hw {
+	struct e1000_adapter *adapter;
+
+	void __iomem *hw_addr;
+	void __iomem *flash_address;
+
+	struct e1000_mac_info mac;
+	struct e1000_fc_info fc;
+	struct e1000_phy_info phy;
+	struct e1000_nvm_info nvm;
+	struct e1000_bus_info bus;
+	struct e1000_host_mng_dhcp_cookie mng_cookie;
+
+	union {
+		struct e1000_dev_spec_82571 e82571;
+		struct e1000_dev_spec_80003es2lan e80003es2lan;
+		struct e1000_dev_spec_ich8lan ich8lan;
+	} dev_spec;
+};
+
+#include "82571.h"
+#include "80003es2lan.h"
+#include "ich8lan.h"
+
+#endif
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
new file mode 100644
index 000000000..e2498dbf3
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -0,0 +1,5802 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* 82562G 10/100 Network Connection
+ * 82562G-2 10/100 Network Connection
+ * 82562GT 10/100 Network Connection
+ * 82562GT-2 10/100 Network Connection
+ * 82562V 10/100 Network Connection
+ * 82562V-2 10/100 Network Connection
+ * 82566DC-2 Gigabit Network Connection
+ * 82566DC Gigabit Network Connection
+ * 82566DM-2 Gigabit Network Connection
+ * 82566DM Gigabit Network Connection
+ * 82566MC Gigabit Network Connection
+ * 82566MM Gigabit Network Connection
+ * 82567LM Gigabit Network Connection
+ * 82567LF Gigabit Network Connection
+ * 82567V Gigabit Network Connection
+ * 82567LM-2 Gigabit Network Connection
+ * 82567LF-2 Gigabit Network Connection
+ * 82567V-2 Gigabit Network Connection
+ * 82567LF-3 Gigabit Network Connection
+ * 82567LM-3 Gigabit Network Connection
+ * 82567LM-4 Gigabit Network Connection
+ * 82577LM Gigabit Network Connection
+ * 82577LC Gigabit Network Connection
+ * 82578DM Gigabit Network Connection
+ * 82578DC Gigabit Network Connection
+ * 82579LM Gigabit Network Connection
+ * 82579V Gigabit Network Connection
+ * Ethernet Connection I217-LM
+ * Ethernet Connection I217-V
+ * Ethernet Connection I218-V
+ * Ethernet Connection I218-LM
+ * Ethernet Connection (2) I218-LM
+ * Ethernet Connection (2) I218-V
+ * Ethernet Connection (3) I218-LM
+ * Ethernet Connection (3) I218-V
+ */
+
+#include "e1000.h"
+
+/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
+/* Offset 04h HSFSTS */
+union ich8_hws_flash_status {
+	struct ich8_hsfsts {
+		u16 flcdone:1;	/* bit 0 Flash Cycle Done */
+		u16 flcerr:1;	/* bit 1 Flash Cycle Error */
+		u16 dael:1;	/* bit 2 Direct Access error Log */
+		u16 berasesz:2;	/* bit 4:3 Sector Erase Size */
+		u16 flcinprog:1;	/* bit 5 flash cycle in Progress */
+		u16 reserved1:2;	/* bit 13:6 Reserved */
+		u16 reserved2:6;	/* bit 13:6 Reserved */
+		u16 fldesvalid:1;	/* bit 14 Flash Descriptor Valid */
+		u16 flockdn:1;	/* bit 15 Flash Config Lock-Down */
+	} hsf_status;
+	u16 regval;
+};
+
+/* ICH GbE Flash Hardware Sequencing Flash control Register bit breakdown */
+/* Offset 06h FLCTL */
+union ich8_hws_flash_ctrl {
+	struct ich8_hsflctl {
+		u16 flcgo:1;	/* 0 Flash Cycle Go */
+		u16 flcycle:2;	/* 2:1 Flash Cycle */
+		u16 reserved:5;	/* 7:3 Reserved  */
+		u16 fldbcount:2;	/* 9:8 Flash Data Byte Count */
+		u16 flockdn:6;	/* 15:10 Reserved */
+	} hsf_ctrl;
+	u16 regval;
+};
+
+/* ICH Flash Region Access Permissions */
+union ich8_hws_flash_regacc {
+	struct ich8_flracc {
+		u32 grra:8;	/* 0:7 GbE region Read Access */
+		u32 grwa:8;	/* 8:15 GbE region Write Access */
+		u32 gmrag:8;	/* 23:16 GbE Master Read Access Grant */
+		u32 gmwag:8;	/* 31:24 GbE Master Write Access Grant */
+	} hsf_flregacc;
+	u16 regval;
+};
+
+/* ICH Flash Protected Region */
+union ich8_flash_protected_range {
+	struct ich8_pr {
+		u32 base:13;	/* 0:12 Protected Range Base */
+		u32 reserved1:2;	/* 13:14 Reserved */
+		u32 rpe:1;	/* 15 Read Protection Enable */
+		u32 limit:13;	/* 16:28 Protected Range Limit */
+		u32 reserved2:2;	/* 29:30 Reserved */
+		u32 wpe:1;	/* 31 Write Protection Enable */
+	} range;
+	u32 regval;
+};
+
+static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
+static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
+static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
+static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
+						u32 offset, u8 byte);
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 *data);
+static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u16 *data);
+static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 size, u16 *data);
+static s32 e1000_read_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset,
+					   u32 *data);
+static s32 e1000_read_flash_dword_ich8lan(struct e1000_hw *hw,
+					  u32 offset, u32 *data);
+static s32 e1000_write_flash_data32_ich8lan(struct e1000_hw *hw,
+					    u32 offset, u32 data);
+static s32 e1000_retry_write_flash_dword_ich8lan(struct e1000_hw *hw,
+						 u32 offset, u32 dword);
+static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
+static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index);
+static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index);
+static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw);
+static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
+static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force);
+static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw);
+static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state);
+
+static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
+{
+	return readw(hw->flash_address + reg);
+}
+
+static inline u32 __er32flash(struct e1000_hw *hw, unsigned long reg)
+{
+	return readl(hw->flash_address + reg);
+}
+
+static inline void __ew16flash(struct e1000_hw *hw, unsigned long reg, u16 val)
+{
+	writew(val, hw->flash_address + reg);
+}
+
+static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
+{
+	writel(val, hw->flash_address + reg);
+}
+
+#define er16flash(reg)		__er16flash(hw, (reg))
+#define er32flash(reg)		__er32flash(hw, (reg))
+#define ew16flash(reg, val)	__ew16flash(hw, (reg), (val))
+#define ew32flash(reg, val)	__ew32flash(hw, (reg), (val))
+
+/**
+ *  e1000_phy_is_accessible_pchlan - Check if able to access PHY registers
+ *  @hw: pointer to the HW structure
+ *
+ *  Test access to the PHY registers by reading the PHY ID registers.  If
+ *  the PHY ID is already known (e.g. resume path) compare it with known ID,
+ *  otherwise assume the read PHY ID is correct if it is valid.
+ *
+ *  Assumes the sw/fw/hw semaphore is already acquired.
+ **/
+static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
+{
+	u16 phy_reg = 0;
+	u32 phy_id = 0;
+	s32 ret_val = 0;
+	u16 retry_count;
+	u32 mac_reg = 0;
+
+	for (retry_count = 0; retry_count < 2; retry_count++) {
+		ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg);
+		if (ret_val || (phy_reg == 0xFFFF))
+			continue;
+		phy_id = (u32)(phy_reg << 16);
+
+		ret_val = e1e_rphy_locked(hw, MII_PHYSID2, &phy_reg);
+		if (ret_val || (phy_reg == 0xFFFF)) {
+			phy_id = 0;
+			continue;
+		}
+		phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+		break;
+	}
+
+	if (hw->phy.id) {
+		if (hw->phy.id == phy_id)
+			goto out;
+	} else if (phy_id) {
+		hw->phy.id = phy_id;
+		hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK);
+		goto out;
+	}
+
+	/* In case the PHY needs to be in mdio slow mode,
+	 * set slow mode and try to get the PHY id again.
+	 */
+	if (hw->mac.type < e1000_pch_lpt) {
+		hw->phy.ops.release(hw);
+		ret_val = e1000_set_mdio_slow_mode_hv(hw);
+		if (!ret_val)
+			ret_val = e1000e_get_phy_id(hw);
+		hw->phy.ops.acquire(hw);
+	}
+
+	if (ret_val)
+		return false;
+out:
+	if ((hw->mac.type == e1000_pch_lpt) ||
+	    (hw->mac.type == e1000_pch_spt)) {
+		/* Unforce SMBus mode in PHY */
+		e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg);
+		phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
+		e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg);
+
+		/* Unforce SMBus mode in MAC */
+		mac_reg = er32(CTRL_EXT);
+		mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+		ew32(CTRL_EXT, mac_reg);
+	}
+
+	return true;
+}
+
+/**
+ *  e1000_toggle_lanphypc_pch_lpt - toggle the LANPHYPC pin value
+ *  @hw: pointer to the HW structure
+ *
+ *  Toggling the LANPHYPC pin value fully power-cycles the PHY and is
+ *  used to reset the PHY to a quiescent state when necessary.
+ **/
+static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw)
+{
+	u32 mac_reg;
+
+	/* Set Phy Config Counter to 50msec */
+	mac_reg = er32(FEXTNVM3);
+	mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+	mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+	ew32(FEXTNVM3, mac_reg);
+
+	/* Toggle LANPHYPC Value bit */
+	mac_reg = er32(CTRL);
+	mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
+	mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
+	ew32(CTRL, mac_reg);
+	e1e_flush();
+	usleep_range(10, 20);
+	mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+	ew32(CTRL, mac_reg);
+	e1e_flush();
+
+	if (hw->mac.type < e1000_pch_lpt) {
+		msleep(50);
+	} else {
+		u16 count = 20;
+
+		do {
+			usleep_range(5000, 10000);
+		} while (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LPCD) && count--);
+
+		msleep(30);
+	}
+}
+
+/**
+ *  e1000_init_phy_workarounds_pchlan - PHY initialization workarounds
+ *  @hw: pointer to the HW structure
+ *
+ *  Workarounds/flow necessary for PHY initialization during driver load
+ *  and resume paths.
+ **/
+static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_adapter *adapter = hw->adapter;
+	u32 mac_reg, fwsm = er32(FWSM);
+	s32 ret_val;
+
+	/* Gate automatic PHY configuration by hardware on managed and
+	 * non-managed 82579 and newer adapters.
+	 */
+	e1000_gate_hw_phy_config_ich8lan(hw, true);
+
+	/* It is not possible to be certain of the current state of ULP
+	 * so forcibly disable it.
+	 */
+	hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown;
+	e1000_disable_ulp_lpt_lp(hw, true);
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val) {
+		e_dbg("Failed to initialize PHY flow\n");
+		goto out;
+	}
+
+	/* The MAC-PHY interconnect may be in SMBus mode.  If the PHY is
+	 * inaccessible and resetting the PHY is not blocked, toggle the
+	 * LANPHYPC Value bit to force the interconnect to PCIe mode.
+	 */
+	switch (hw->mac.type) {
+	case e1000_pch_lpt:
+	case e1000_pch_spt:
+		if (e1000_phy_is_accessible_pchlan(hw))
+			break;
+
+		/* Before toggling LANPHYPC, see if PHY is accessible by
+		 * forcing MAC to SMBus mode first.
+		 */
+		mac_reg = er32(CTRL_EXT);
+		mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+		ew32(CTRL_EXT, mac_reg);
+
+		/* Wait 50 milliseconds for MAC to finish any retries
+		 * that it might be trying to perform from previous
+		 * attempts to acknowledge any phy read requests.
+		 */
+		msleep(50);
+
+		/* fall-through */
+	case e1000_pch2lan:
+		if (e1000_phy_is_accessible_pchlan(hw))
+			break;
+
+		/* fall-through */
+	case e1000_pchlan:
+		if ((hw->mac.type == e1000_pchlan) &&
+		    (fwsm & E1000_ICH_FWSM_FW_VALID))
+			break;
+
+		if (hw->phy.ops.check_reset_block(hw)) {
+			e_dbg("Required LANPHYPC toggle blocked by ME\n");
+			ret_val = -E1000_ERR_PHY;
+			break;
+		}
+
+		/* Toggle LANPHYPC Value bit */
+		e1000_toggle_lanphypc_pch_lpt(hw);
+		if (hw->mac.type >= e1000_pch_lpt) {
+			if (e1000_phy_is_accessible_pchlan(hw))
+				break;
+
+			/* Toggling LANPHYPC brings the PHY out of SMBus mode
+			 * so ensure that the MAC is also out of SMBus mode
+			 */
+			mac_reg = er32(CTRL_EXT);
+			mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+			ew32(CTRL_EXT, mac_reg);
+
+			if (e1000_phy_is_accessible_pchlan(hw))
+				break;
+
+			ret_val = -E1000_ERR_PHY;
+		}
+		break;
+	default:
+		break;
+	}
+
+	hw->phy.ops.release(hw);
+	if (!ret_val) {
+
+		/* Check to see if able to reset PHY.  Print error if not */
+		if (hw->phy.ops.check_reset_block(hw)) {
+			e_err("Reset blocked by ME\n");
+			goto out;
+		}
+
+		/* Reset the PHY before any access to it.  Doing so, ensures
+		 * that the PHY is in a known good state before we read/write
+		 * PHY registers.  The generic reset is sufficient here,
+		 * because we haven't determined the PHY type yet.
+		 */
+		ret_val = e1000e_phy_hw_reset_generic(hw);
+		if (ret_val)
+			goto out;
+
+		/* On a successful reset, possibly need to wait for the PHY
+		 * to quiesce to an accessible state before returning control
+		 * to the calling function.  If the PHY does not quiesce, then
+		 * return E1000E_BLK_PHY_RESET, as this is the condition that
+		 *  the PHY is in.
+		 */
+		ret_val = hw->phy.ops.check_reset_block(hw);
+		if (ret_val)
+			e_err("ME blocked access to PHY after reset\n");
+	}
+
+out:
+	/* Ungate automatic PHY configuration on non-managed 82579 */
+	if ((hw->mac.type == e1000_pch2lan) &&
+	    !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
+		usleep_range(10000, 20000);
+		e1000_gate_hw_phy_config_ich8lan(hw, false);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_init_phy_params_pchlan - Initialize PHY function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize family-specific PHY parameters and function pointers.
+ **/
+static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+
+	phy->addr = 1;
+	phy->reset_delay_us = 100;
+
+	phy->ops.set_page = e1000_set_page_igp;
+	phy->ops.read_reg = e1000_read_phy_reg_hv;
+	phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked;
+	phy->ops.read_reg_page = e1000_read_phy_reg_page_hv;
+	phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan;
+	phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan;
+	phy->ops.write_reg = e1000_write_phy_reg_hv;
+	phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked;
+	phy->ops.write_reg_page = e1000_write_phy_reg_page_hv;
+	phy->ops.power_up = e1000_power_up_phy_copper;
+	phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
+	phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+	phy->id = e1000_phy_unknown;
+
+	ret_val = e1000_init_phy_workarounds_pchlan(hw);
+	if (ret_val)
+		return ret_val;
+
+	if (phy->id == e1000_phy_unknown)
+		switch (hw->mac.type) {
+		default:
+			ret_val = e1000e_get_phy_id(hw);
+			if (ret_val)
+				return ret_val;
+			if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
+				break;
+			/* fall-through */
+		case e1000_pch2lan:
+		case e1000_pch_lpt:
+		case e1000_pch_spt:
+			/* In case the PHY needs to be in mdio slow mode,
+			 * set slow mode and try to get the PHY id again.
+			 */
+			ret_val = e1000_set_mdio_slow_mode_hv(hw);
+			if (ret_val)
+				return ret_val;
+			ret_val = e1000e_get_phy_id(hw);
+			if (ret_val)
+				return ret_val;
+			break;
+		}
+	phy->type = e1000e_get_phy_type_from_id(phy->id);
+
+	switch (phy->type) {
+	case e1000_phy_82577:
+	case e1000_phy_82579:
+	case e1000_phy_i217:
+		phy->ops.check_polarity = e1000_check_polarity_82577;
+		phy->ops.force_speed_duplex =
+		    e1000_phy_force_speed_duplex_82577;
+		phy->ops.get_cable_length = e1000_get_cable_length_82577;
+		phy->ops.get_info = e1000_get_phy_info_82577;
+		phy->ops.commit = e1000e_phy_sw_reset;
+		break;
+	case e1000_phy_82578:
+		phy->ops.check_polarity = e1000_check_polarity_m88;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+		phy->ops.get_cable_length = e1000e_get_cable_length_m88;
+		phy->ops.get_info = e1000e_get_phy_info_m88;
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		break;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_init_phy_params_ich8lan - Initialize PHY function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize family-specific PHY parameters and function pointers.
+ **/
+static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 i = 0;
+
+	phy->addr = 1;
+	phy->reset_delay_us = 100;
+
+	phy->ops.power_up = e1000_power_up_phy_copper;
+	phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
+
+	/* We may need to do this twice - once for IGP and if that fails,
+	 * we'll set BM func pointers and try again
+	 */
+	ret_val = e1000e_determine_phy_address(hw);
+	if (ret_val) {
+		phy->ops.write_reg = e1000e_write_phy_reg_bm;
+		phy->ops.read_reg = e1000e_read_phy_reg_bm;
+		ret_val = e1000e_determine_phy_address(hw);
+		if (ret_val) {
+			e_dbg("Cannot determine PHY addr. Erroring out\n");
+			return ret_val;
+		}
+	}
+
+	phy->id = 0;
+	while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
+	       (i++ < 100)) {
+		usleep_range(1000, 2000);
+		ret_val = e1000e_get_phy_id(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Verify phy id */
+	switch (phy->id) {
+	case IGP03E1000_E_PHY_ID:
+		phy->type = e1000_phy_igp_3;
+		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+		phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked;
+		phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked;
+		phy->ops.get_info = e1000e_get_phy_info_igp;
+		phy->ops.check_polarity = e1000_check_polarity_igp;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp;
+		break;
+	case IFE_E_PHY_ID:
+	case IFE_PLUS_E_PHY_ID:
+	case IFE_C_E_PHY_ID:
+		phy->type = e1000_phy_ife;
+		phy->autoneg_mask = E1000_ALL_NOT_GIG;
+		phy->ops.get_info = e1000_get_phy_info_ife;
+		phy->ops.check_polarity = e1000_check_polarity_ife;
+		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife;
+		break;
+	case BME1000_E_PHY_ID:
+		phy->type = e1000_phy_bm;
+		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+		phy->ops.read_reg = e1000e_read_phy_reg_bm;
+		phy->ops.write_reg = e1000e_write_phy_reg_bm;
+		phy->ops.commit = e1000e_phy_sw_reset;
+		phy->ops.get_info = e1000e_get_phy_info_m88;
+		phy->ops.check_polarity = e1000_check_polarity_m88;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+		break;
+	default:
+		return -E1000_ERR_PHY;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_init_nvm_params_ich8lan - Initialize NVM function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize family-specific NVM parameters and function
+ *  pointers.
+ **/
+static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 gfpreg, sector_base_addr, sector_end_addr;
+	u16 i;
+	u32 nvm_size;
+
+	nvm->type = e1000_nvm_flash_sw;
+
+	if (hw->mac.type == e1000_pch_spt) {
+		/* in SPT, gfpreg doesn't exist. NVM size is taken from the
+		 * STRAP register. This is because in SPT the GbE Flash region
+		 * is no longer accessed through the flash registers. Instead,
+		 * the mechanism has changed, and the Flash region access
+		 * registers are now implemented in GbE memory space.
+		 */
+		nvm->flash_base_addr = 0;
+		nvm_size = (((er32(STRAP) >> 1) & 0x1F) + 1)
+		    * NVM_SIZE_MULTIPLIER;
+		nvm->flash_bank_size = nvm_size / 2;
+		/* Adjust to word count */
+		nvm->flash_bank_size /= sizeof(u16);
+		/* Set the base address for flash register access */
+		hw->flash_address = hw->hw_addr + E1000_FLASH_BASE_ADDR;
+	} else {
+		/* Can't read flash registers if register set isn't mapped. */
+		if (!hw->flash_address) {
+			e_dbg("ERROR: Flash registers not mapped\n");
+			return -E1000_ERR_CONFIG;
+		}
+
+		gfpreg = er32flash(ICH_FLASH_GFPREG);
+
+		/* sector_X_addr is a "sector"-aligned address (4096 bytes)
+		 * Add 1 to sector_end_addr since this sector is included in
+		 * the overall size.
+		 */
+		sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK;
+		sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1;
+
+		/* flash_base_addr is byte-aligned */
+		nvm->flash_base_addr = sector_base_addr
+		    << FLASH_SECTOR_ADDR_SHIFT;
+
+		/* find total size of the NVM, then cut in half since the total
+		 * size represents two separate NVM banks.
+		 */
+		nvm->flash_bank_size = ((sector_end_addr - sector_base_addr)
+					<< FLASH_SECTOR_ADDR_SHIFT);
+		nvm->flash_bank_size /= 2;
+		/* Adjust to word count */
+		nvm->flash_bank_size /= sizeof(u16);
+	}
+
+	nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
+
+	/* Clear shadow ram */
+	for (i = 0; i < nvm->word_size; i++) {
+		dev_spec->shadow_ram[i].modified = false;
+		dev_spec->shadow_ram[i].value = 0xFFFF;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_init_mac_params_ich8lan - Initialize MAC function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize family-specific MAC parameters and function
+ *  pointers.
+ **/
+static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+
+	/* Set media type function pointer */
+	hw->phy.media_type = e1000_media_type_copper;
+
+	/* Set mta register count */
+	mac->mta_reg_count = 32;
+	/* Set rar entry count */
+	mac->rar_entry_count = E1000_ICH_RAR_ENTRIES;
+	if (mac->type == e1000_ich8lan)
+		mac->rar_entry_count--;
+	/* FWSM register */
+	mac->has_fwsm = true;
+	/* ARC subsystem not supported */
+	mac->arc_subsystem_valid = false;
+	/* Adaptive IFS supported */
+	mac->adaptive_ifs = true;
+
+	/* LED and other operations */
+	switch (mac->type) {
+	case e1000_ich8lan:
+	case e1000_ich9lan:
+	case e1000_ich10lan:
+		/* check management mode */
+		mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
+		/* ID LED init */
+		mac->ops.id_led_init = e1000e_id_led_init_generic;
+		/* blink LED */
+		mac->ops.blink_led = e1000e_blink_led_generic;
+		/* setup LED */
+		mac->ops.setup_led = e1000e_setup_led_generic;
+		/* cleanup LED */
+		mac->ops.cleanup_led = e1000_cleanup_led_ich8lan;
+		/* turn on/off LED */
+		mac->ops.led_on = e1000_led_on_ich8lan;
+		mac->ops.led_off = e1000_led_off_ich8lan;
+		break;
+	case e1000_pch2lan:
+		mac->rar_entry_count = E1000_PCH2_RAR_ENTRIES;
+		mac->ops.rar_set = e1000_rar_set_pch2lan;
+		/* fall-through */
+	case e1000_pch_lpt:
+	case e1000_pch_spt:
+	case e1000_pchlan:
+		/* check management mode */
+		mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
+		/* ID LED init */
+		mac->ops.id_led_init = e1000_id_led_init_pchlan;
+		/* setup LED */
+		mac->ops.setup_led = e1000_setup_led_pchlan;
+		/* cleanup LED */
+		mac->ops.cleanup_led = e1000_cleanup_led_pchlan;
+		/* turn on/off LED */
+		mac->ops.led_on = e1000_led_on_pchlan;
+		mac->ops.led_off = e1000_led_off_pchlan;
+		break;
+	default:
+		break;
+	}
+
+	if ((mac->type == e1000_pch_lpt) || (mac->type == e1000_pch_spt)) {
+		mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES;
+		mac->ops.rar_set = e1000_rar_set_pch_lpt;
+		mac->ops.setup_physical_interface =
+		    e1000_setup_copper_link_pch_lpt;
+		mac->ops.rar_get_count = e1000_rar_get_count_pch_lpt;
+	}
+
+	/* Enable PCS Lock-loss workaround for ICH8 */
+	if (mac->type == e1000_ich8lan)
+		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
+
+	return 0;
+}
+
+/**
+ *  __e1000_access_emi_reg_locked - Read/write EMI register
+ *  @hw: pointer to the HW structure
+ *  @addr: EMI address to program
+ *  @data: pointer to value to read/write from/to the EMI address
+ *  @read: boolean flag to indicate read or write
+ *
+ *  This helper function assumes the SW/FW/HW Semaphore is already acquired.
+ **/
+static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address,
+					 u16 *data, bool read)
+{
+	s32 ret_val;
+
+	ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, address);
+	if (ret_val)
+		return ret_val;
+
+	if (read)
+		ret_val = e1e_rphy_locked(hw, I82579_EMI_DATA, data);
+	else
+		ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, *data);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_emi_reg_locked - Read Extended Management Interface register
+ *  @hw: pointer to the HW structure
+ *  @addr: EMI address to program
+ *  @data: value to be read from the EMI address
+ *
+ *  Assumes the SW/FW/HW Semaphore is already acquired.
+ **/
+s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data)
+{
+	return __e1000_access_emi_reg_locked(hw, addr, data, true);
+}
+
+/**
+ *  e1000_write_emi_reg_locked - Write Extended Management Interface register
+ *  @hw: pointer to the HW structure
+ *  @addr: EMI address to program
+ *  @data: value to be written to the EMI address
+ *
+ *  Assumes the SW/FW/HW Semaphore is already acquired.
+ **/
+s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data)
+{
+	return __e1000_access_emi_reg_locked(hw, addr, &data, false);
+}
+
+/**
+ *  e1000_set_eee_pchlan - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *
+ *  Enable/disable EEE based on setting in dev_spec structure, the duplex of
+ *  the link and the EEE capabilities of the link partner.  The LPI Control
+ *  register bits will remain set only if/when link is up.
+ *
+ *  EEE LPI must not be asserted earlier than one second after link is up.
+ *  On 82579, EEE LPI should not be enabled until such time otherwise there
+ *  can be link issues with some switches.  Other devices can have EEE LPI
+ *  enabled immediately upon link up since they have a timer in hardware which
+ *  prevents LPI from being asserted too early.
+ **/
+s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	s32 ret_val;
+	u16 lpa, pcs_status, adv, adv_addr, lpi_ctrl, data;
+
+	switch (hw->phy.type) {
+	case e1000_phy_82579:
+		lpa = I82579_EEE_LP_ABILITY;
+		pcs_status = I82579_EEE_PCS_STATUS;
+		adv_addr = I82579_EEE_ADVERTISEMENT;
+		break;
+	case e1000_phy_i217:
+		lpa = I217_EEE_LP_ABILITY;
+		pcs_status = I217_EEE_PCS_STATUS;
+		adv_addr = I217_EEE_ADVERTISEMENT;
+		break;
+	default:
+		return 0;
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1e_rphy_locked(hw, I82579_LPI_CTRL, &lpi_ctrl);
+	if (ret_val)
+		goto release;
+
+	/* Clear bits that enable EEE in various speeds */
+	lpi_ctrl &= ~I82579_LPI_CTRL_ENABLE_MASK;
+
+	/* Enable EEE if not disabled by user */
+	if (!dev_spec->eee_disable) {
+		/* Save off link partner's EEE ability */
+		ret_val = e1000_read_emi_reg_locked(hw, lpa,
+						    &dev_spec->eee_lp_ability);
+		if (ret_val)
+			goto release;
+
+		/* Read EEE advertisement */
+		ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &adv);
+		if (ret_val)
+			goto release;
+
+		/* Enable EEE only for speeds in which the link partner is
+		 * EEE capable and for which we advertise EEE.
+		 */
+		if (adv & dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED)
+			lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE;
+
+		if (adv & dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) {
+			e1e_rphy_locked(hw, MII_LPA, &data);
+			if (data & LPA_100FULL)
+				lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE;
+			else
+				/* EEE is not supported in 100Half, so ignore
+				 * partner's EEE in 100 ability if full-duplex
+				 * is not advertised.
+				 */
+				dev_spec->eee_lp_ability &=
+				    ~I82579_EEE_100_SUPPORTED;
+		}
+	}
+
+	if (hw->phy.type == e1000_phy_82579) {
+		ret_val = e1000_read_emi_reg_locked(hw, I82579_LPI_PLL_SHUT,
+						    &data);
+		if (ret_val)
+			goto release;
+
+		data &= ~I82579_LPI_100_PLL_SHUT;
+		ret_val = e1000_write_emi_reg_locked(hw, I82579_LPI_PLL_SHUT,
+						     data);
+	}
+
+	/* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */
+	ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data);
+	if (ret_val)
+		goto release;
+
+	ret_val = e1e_wphy_locked(hw, I82579_LPI_CTRL, lpi_ctrl);
+release:
+	hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP
+ *  @hw:   pointer to the HW structure
+ *  @link: link up bool flag
+ *
+ *  When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications
+ *  preventing further DMA write requests.  Workaround the issue by disabling
+ *  the de-assertion of the clock request when in 1Gpbs mode.
+ *  Also, set appropriate Tx re-transmission timeouts for 10 and 100Half link
+ *  speeds in order to avoid Tx hangs.
+ **/
+static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link)
+{
+	u32 fextnvm6 = er32(FEXTNVM6);
+	u32 status = er32(STATUS);
+	s32 ret_val = 0;
+	u16 reg;
+
+	if (link && (status & E1000_STATUS_SPEED_1000)) {
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val =
+		    e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+						&reg);
+		if (ret_val)
+			goto release;
+
+		ret_val =
+		    e1000e_write_kmrn_reg_locked(hw,
+						 E1000_KMRNCTRLSTA_K1_CONFIG,
+						 reg &
+						 ~E1000_KMRNCTRLSTA_K1_ENABLE);
+		if (ret_val)
+			goto release;
+
+		usleep_range(10, 20);
+
+		ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK);
+
+		ret_val =
+		    e1000e_write_kmrn_reg_locked(hw,
+						 E1000_KMRNCTRLSTA_K1_CONFIG,
+						 reg);
+release:
+		hw->phy.ops.release(hw);
+	} else {
+		/* clear FEXTNVM6 bit 8 on link down or 10/100 */
+		fextnvm6 &= ~E1000_FEXTNVM6_REQ_PLL_CLK;
+
+		if ((hw->phy.revision > 5) || !link ||
+		    ((status & E1000_STATUS_SPEED_100) &&
+		     (status & E1000_STATUS_FD)))
+			goto update_fextnvm6;
+
+		ret_val = e1e_rphy(hw, I217_INBAND_CTRL, &reg);
+		if (ret_val)
+			return ret_val;
+
+		/* Clear link status transmit timeout */
+		reg &= ~I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK;
+
+		if (status & E1000_STATUS_SPEED_100) {
+			/* Set inband Tx timeout to 5x10us for 100Half */
+			reg |= 5 << I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT;
+
+			/* Do not extend the K1 entry latency for 100Half */
+			fextnvm6 &= ~E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION;
+		} else {
+			/* Set inband Tx timeout to 50x10us for 10Full/Half */
+			reg |= 50 <<
+			    I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT;
+
+			/* Extend the K1 entry latency for 10 Mbps */
+			fextnvm6 |= E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION;
+		}
+
+		ret_val = e1e_wphy(hw, I217_INBAND_CTRL, reg);
+		if (ret_val)
+			return ret_val;
+
+update_fextnvm6:
+		ew32(FEXTNVM6, fextnvm6);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_platform_pm_pch_lpt - Set platform power management values
+ *  @hw: pointer to the HW structure
+ *  @link: bool indicating link status
+ *
+ *  Set the Latency Tolerance Reporting (LTR) values for the "PCIe-like"
+ *  GbE MAC in the Lynx Point PCH based on Rx buffer size and link speed
+ *  when link is up (which must not exceed the maximum latency supported
+ *  by the platform), otherwise specify there is no LTR requirement.
+ *  Unlike true-PCIe devices which set the LTR maximum snoop/no-snoop
+ *  latencies in the LTR Extended Capability Structure in the PCIe Extended
+ *  Capability register set, on this device LTR is set by writing the
+ *  equivalent snoop/no-snoop latencies in the LTRV register in the MAC and
+ *  set the SEND bit to send an Intel On-chip System Fabric sideband (IOSF-SB)
+ *  message to the PMC.
+ **/
+static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
+{
+	u32 reg = link << (E1000_LTRV_REQ_SHIFT + E1000_LTRV_NOSNOOP_SHIFT) |
+	    link << E1000_LTRV_REQ_SHIFT | E1000_LTRV_SEND;
+	u16 lat_enc = 0;	/* latency encoded */
+
+	if (link) {
+		u16 speed, duplex, scale = 0;
+		u16 max_snoop, max_nosnoop;
+		u16 max_ltr_enc;	/* max LTR latency encoded */
+		s64 lat_ns;	/* latency (ns) */
+		s64 value;
+		u32 rxa;
+
+		if (!hw->adapter->max_frame_size) {
+			e_dbg("max_frame_size not set.\n");
+			return -E1000_ERR_CONFIG;
+		}
+
+		hw->mac.ops.get_link_up_info(hw, &speed, &duplex);
+		if (!speed) {
+			e_dbg("Speed not set.\n");
+			return -E1000_ERR_CONFIG;
+		}
+
+		/* Rx Packet Buffer Allocation size (KB) */
+		rxa = er32(PBA) & E1000_PBA_RXA_MASK;
+
+		/* Determine the maximum latency tolerated by the device.
+		 *
+		 * Per the PCIe spec, the tolerated latencies are encoded as
+		 * a 3-bit encoded scale (only 0-5 are valid) multiplied by
+		 * a 10-bit value (0-1023) to provide a range from 1 ns to
+		 * 2^25*(2^10-1) ns.  The scale is encoded as 0=2^0ns,
+		 * 1=2^5ns, 2=2^10ns,...5=2^25ns.
+		 */
+		lat_ns = ((s64)rxa * 1024 -
+			  (2 * (s64)hw->adapter->max_frame_size)) * 8 * 1000;
+		if (lat_ns < 0)
+			lat_ns = 0;
+		else
+			do_div(lat_ns, speed);
+
+		value = lat_ns;
+		while (value > PCI_LTR_VALUE_MASK) {
+			scale++;
+			value = DIV_ROUND_UP(value, (1 << 5));
+		}
+		if (scale > E1000_LTRV_SCALE_MAX) {
+			e_dbg("Invalid LTR latency scale %d\n", scale);
+			return -E1000_ERR_CONFIG;
+		}
+		lat_enc = (u16)((scale << PCI_LTR_SCALE_SHIFT) | value);
+
+		/* Determine the maximum latency tolerated by the platform */
+		pci_read_config_word(hw->adapter->pdev, E1000_PCI_LTR_CAP_LPT,
+				     &max_snoop);
+		pci_read_config_word(hw->adapter->pdev,
+				     E1000_PCI_LTR_CAP_LPT + 2, &max_nosnoop);
+		max_ltr_enc = max_t(u16, max_snoop, max_nosnoop);
+
+		if (lat_enc > max_ltr_enc)
+			lat_enc = max_ltr_enc;
+	}
+
+	/* Set Snoop and No-Snoop latencies the same */
+	reg |= lat_enc | (lat_enc << E1000_LTRV_NOSNOOP_SHIFT);
+	ew32(LTRV, reg);
+
+	return 0;
+}
+
+/**
+ *  e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP
+ *  @hw: pointer to the HW structure
+ *  @to_sx: boolean indicating a system power state transition to Sx
+ *
+ *  When link is down, configure ULP mode to significantly reduce the power
+ *  to the PHY.  If on a Manageability Engine (ME) enabled system, tell the
+ *  ME firmware to start the ULP configuration.  If not on an ME enabled
+ *  system, configure the ULP mode by software.
+ */
+s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
+{
+	u32 mac_reg;
+	s32 ret_val = 0;
+	u16 phy_reg;
+
+	if ((hw->mac.type < e1000_pch_lpt) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) ||
+	    (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_on))
+		return 0;
+
+	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+		/* Request ME configure ULP mode in the PHY */
+		mac_reg = er32(H2ME);
+		mac_reg |= E1000_H2ME_ULP | E1000_H2ME_ENFORCE_SETTINGS;
+		ew32(H2ME, mac_reg);
+
+		goto out;
+	}
+
+	if (!to_sx) {
+		int i = 0;
+
+		/* Poll up to 5 seconds for Cable Disconnected indication */
+		while (!(er32(FEXT) & E1000_FEXT_PHY_CABLE_DISCONNECTED)) {
+			/* Bail if link is re-acquired */
+			if (er32(STATUS) & E1000_STATUS_LU)
+				return -E1000_ERR_PHY;
+
+			if (i++ == 100)
+				break;
+
+			msleep(50);
+		}
+		e_dbg("CABLE_DISCONNECTED %s set after %dmsec\n",
+		      (er32(FEXT) &
+		       E1000_FEXT_PHY_CABLE_DISCONNECTED) ? "" : "not", i * 50);
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	/* Si workaround for ULP entry flow on i127/rev6 h/w.  Enable
+	 * LPLU and disable Gig speed when entering ULP
+	 */
+	if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6)) {
+		ret_val = e1000_read_phy_reg_hv_locked(hw, HV_OEM_BITS,
+						       &phy_reg);
+		if (ret_val)
+			goto release;
+		phy_reg |= HV_OEM_BITS_LPLU | HV_OEM_BITS_GBE_DIS;
+		ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS,
+							phy_reg);
+		if (ret_val)
+			goto release;
+	}
+
+	/* Force SMBus mode in PHY */
+	ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
+	if (ret_val)
+		goto release;
+	phy_reg |= CV_SMB_CTRL_FORCE_SMBUS;
+	e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
+
+	/* Force SMBus mode in MAC */
+	mac_reg = er32(CTRL_EXT);
+	mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+	ew32(CTRL_EXT, mac_reg);
+
+	/* Set Inband ULP Exit, Reset to SMBus mode and
+	 * Disable SMBus Release on PERST# in PHY
+	 */
+	ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg);
+	if (ret_val)
+		goto release;
+	phy_reg |= (I218_ULP_CONFIG1_RESET_TO_SMBUS |
+		    I218_ULP_CONFIG1_DISABLE_SMB_PERST);
+	if (to_sx) {
+		if (er32(WUFC) & E1000_WUFC_LNKC)
+			phy_reg |= I218_ULP_CONFIG1_WOL_HOST;
+
+		phy_reg |= I218_ULP_CONFIG1_STICKY_ULP;
+	} else {
+		phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT;
+	}
+	e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+	/* Set Disable SMBus Release on PERST# in MAC */
+	mac_reg = er32(FEXTNVM7);
+	mac_reg |= E1000_FEXTNVM7_DISABLE_SMB_PERST;
+	ew32(FEXTNVM7, mac_reg);
+
+	/* Commit ULP changes in PHY by starting auto ULP configuration */
+	phy_reg |= I218_ULP_CONFIG1_START;
+	e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+release:
+	hw->phy.ops.release(hw);
+out:
+	if (ret_val)
+		e_dbg("Error in ULP enable flow: %d\n", ret_val);
+	else
+		hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_on;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_disable_ulp_lpt_lp - unconfigure Ultra Low Power mode for LynxPoint-LP
+ *  @hw: pointer to the HW structure
+ *  @force: boolean indicating whether or not to force disabling ULP
+ *
+ *  Un-configure ULP mode when link is up, the system is transitioned from
+ *  Sx or the driver is unloaded.  If on a Manageability Engine (ME) enabled
+ *  system, poll for an indication from ME that ULP has been un-configured.
+ *  If not on an ME enabled system, un-configure the ULP mode by software.
+ *
+ *  During nominal operation, this function is called when link is acquired
+ *  to disable ULP mode (force=false); otherwise, for example when unloading
+ *  the driver or during Sx->S0 transitions, this is called with force=true
+ *  to forcibly disable ULP.
+ */
+static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force)
+{
+	s32 ret_val = 0;
+	u32 mac_reg;
+	u16 phy_reg;
+	int i = 0;
+
+	if ((hw->mac.type < e1000_pch_lpt) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) ||
+	    (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_off))
+		return 0;
+
+	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+		if (force) {
+			/* Request ME un-configure ULP mode in the PHY */
+			mac_reg = er32(H2ME);
+			mac_reg &= ~E1000_H2ME_ULP;
+			mac_reg |= E1000_H2ME_ENFORCE_SETTINGS;
+			ew32(H2ME, mac_reg);
+		}
+
+		/* Poll up to 100msec for ME to clear ULP_CFG_DONE */
+		while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) {
+			if (i++ == 10) {
+				ret_val = -E1000_ERR_PHY;
+				goto out;
+			}
+
+			usleep_range(10000, 20000);
+		}
+		e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", i * 10);
+
+		if (force) {
+			mac_reg = er32(H2ME);
+			mac_reg &= ~E1000_H2ME_ENFORCE_SETTINGS;
+			ew32(H2ME, mac_reg);
+		} else {
+			/* Clear H2ME.ULP after ME ULP configuration */
+			mac_reg = er32(H2ME);
+			mac_reg &= ~E1000_H2ME_ULP;
+			ew32(H2ME, mac_reg);
+		}
+
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	if (force)
+		/* Toggle LANPHYPC Value bit */
+		e1000_toggle_lanphypc_pch_lpt(hw);
+
+	/* Unforce SMBus mode in PHY */
+	ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
+	if (ret_val) {
+		/* The MAC might be in PCIe mode, so temporarily force to
+		 * SMBus mode in order to access the PHY.
+		 */
+		mac_reg = er32(CTRL_EXT);
+		mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+		ew32(CTRL_EXT, mac_reg);
+
+		msleep(50);
+
+		ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL,
+						       &phy_reg);
+		if (ret_val)
+			goto release;
+	}
+	phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
+	e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
+
+	/* Unforce SMBus mode in MAC */
+	mac_reg = er32(CTRL_EXT);
+	mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+	ew32(CTRL_EXT, mac_reg);
+
+	/* When ULP mode was previously entered, K1 was disabled by the
+	 * hardware.  Re-Enable K1 in the PHY when exiting ULP.
+	 */
+	ret_val = e1000_read_phy_reg_hv_locked(hw, HV_PM_CTRL, &phy_reg);
+	if (ret_val)
+		goto release;
+	phy_reg |= HV_PM_CTRL_K1_ENABLE;
+	e1000_write_phy_reg_hv_locked(hw, HV_PM_CTRL, phy_reg);
+
+	/* Clear ULP enabled configuration */
+	ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg);
+	if (ret_val)
+		goto release;
+	phy_reg &= ~(I218_ULP_CONFIG1_IND |
+		     I218_ULP_CONFIG1_STICKY_ULP |
+		     I218_ULP_CONFIG1_RESET_TO_SMBUS |
+		     I218_ULP_CONFIG1_WOL_HOST |
+		     I218_ULP_CONFIG1_INBAND_EXIT |
+		     I218_ULP_CONFIG1_DISABLE_SMB_PERST);
+	e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+	/* Commit ULP changes by starting auto ULP configuration */
+	phy_reg |= I218_ULP_CONFIG1_START;
+	e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+	/* Clear Disable SMBus Release on PERST# in MAC */
+	mac_reg = er32(FEXTNVM7);
+	mac_reg &= ~E1000_FEXTNVM7_DISABLE_SMB_PERST;
+	ew32(FEXTNVM7, mac_reg);
+
+release:
+	hw->phy.ops.release(hw);
+	if (force) {
+		e1000_phy_hw_reset(hw);
+		msleep(50);
+	}
+out:
+	if (ret_val)
+		e_dbg("Error in ULP disable flow: %d\n", ret_val);
+	else
+		hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_off;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks to see of the link status of the hardware has changed.  If a
+ *  change in link status has been detected, then we read the PHY registers
+ *  to get the current speed/duplex if link exists.
+ **/
+static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val, tipg_reg = 0;
+	u16 emi_addr, emi_val = 0;
+	bool link;
+	u16 phy_reg;
+
+	/* We only want to go out to the PHY registers to see if Auto-Neg
+	 * has completed and/or if our link status has changed.  The
+	 * get_link_status flag is set upon receiving a Link Status
+	 * Change or Rx Sequence Error interrupt.
+	 */
+	if (!mac->get_link_status)
+		return 0;
+
+	/* First we want to see if the MII Status Register reports
+	 * link.  If so, then we want to get the current speed/duplex
+	 * of the PHY.
+	 */
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (hw->mac.type == e1000_pchlan) {
+		ret_val = e1000_k1_gig_workaround_hv(hw, link);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* When connected at 10Mbps half-duplex, some parts are excessively
+	 * aggressive resulting in many collisions. To avoid this, increase
+	 * the IPG and reduce Rx latency in the PHY.
+	 */
+	if (((hw->mac.type == e1000_pch2lan) ||
+	     (hw->mac.type == e1000_pch_lpt) ||
+	     (hw->mac.type == e1000_pch_spt)) && link) {
+		u32 reg;
+
+		reg = er32(STATUS);
+		tipg_reg = er32(TIPG);
+		tipg_reg &= ~E1000_TIPG_IPGT_MASK;
+
+		if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) {
+			tipg_reg |= 0xFF;
+			/* Reduce Rx latency in analog PHY */
+			emi_val = 0;
+		} else {
+
+			/* Roll back the default values */
+			tipg_reg |= 0x08;
+			emi_val = 1;
+		}
+
+		ew32(TIPG, tipg_reg);
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+
+		if (hw->mac.type == e1000_pch2lan)
+			emi_addr = I82579_RX_CONFIG;
+		else
+			emi_addr = I217_RX_CONFIG;
+		ret_val = e1000_write_emi_reg_locked(hw, emi_addr, emi_val);
+
+		hw->phy.ops.release(hw);
+
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Work-around I218 hang issue */
+	if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM3) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3) ||
+	    (hw->mac.type == e1000_pch_spt)) {
+		ret_val = e1000_k1_workaround_lpt_lp(hw, link);
+		if (ret_val)
+			return ret_val;
+	}
+	if ((hw->mac.type == e1000_pch_lpt) ||
+	    (hw->mac.type == e1000_pch_spt)) {
+		/* Set platform power management values for
+		 * Latency Tolerance Reporting (LTR)
+		 */
+		ret_val = e1000_platform_pm_pch_lpt(hw, link);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Clear link partner's EEE ability */
+	hw->dev_spec.ich8lan.eee_lp_ability = 0;
+
+	/* FEXTNVM6 K1-off workaround */
+	if (hw->mac.type == e1000_pch_spt) {
+		u32 pcieanacfg = er32(PCIEANACFG);
+		u32 fextnvm6 = er32(FEXTNVM6);
+
+		if (pcieanacfg & E1000_FEXTNVM6_K1_OFF_ENABLE)
+			fextnvm6 |= E1000_FEXTNVM6_K1_OFF_ENABLE;
+		else
+			fextnvm6 &= ~E1000_FEXTNVM6_K1_OFF_ENABLE;
+
+		ew32(FEXTNVM6, fextnvm6);
+	}
+
+	if (!link)
+		return 0;	/* No link detected */
+
+	mac->get_link_status = false;
+
+	switch (hw->mac.type) {
+	case e1000_pch2lan:
+		ret_val = e1000_k1_workaround_lv(hw);
+		if (ret_val)
+			return ret_val;
+		/* fall-thru */
+	case e1000_pchlan:
+		if (hw->phy.type == e1000_phy_82578) {
+			ret_val = e1000_link_stall_workaround_hv(hw);
+			if (ret_val)
+				return ret_val;
+		}
+
+		/* Workaround for PCHx parts in half-duplex:
+		 * Set the number of preambles removed from the packet
+		 * when it is passed from the PHY to the MAC to prevent
+		 * the MAC from misinterpreting the packet type.
+		 */
+		e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg);
+		phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK;
+
+		if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD)
+			phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT);
+
+		e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg);
+		break;
+	default:
+		break;
+	}
+
+	/* Check if there was DownShift, must be checked
+	 * immediately after link-up
+	 */
+	e1000e_check_downshift(hw);
+
+	/* Enable/Disable EEE after link up */
+	if (hw->phy.type > e1000_phy_82579) {
+		ret_val = e1000_set_eee_pchlan(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* If we are forcing speed/duplex, then we simply return since
+	 * we have already determined whether we have link or not.
+	 */
+	if (!mac->autoneg)
+		return -E1000_ERR_CONFIG;
+
+	/* Auto-Neg is enabled.  Auto Speed Detection takes care
+	 * of MAC speed/duplex configuration.  So we only need to
+	 * configure Collision Distance in the MAC.
+	 */
+	mac->ops.config_collision_dist(hw);
+
+	/* Configure Flow Control now that Auto-Neg has completed.
+	 * First, we need to restore the desired flow control
+	 * settings because we may have had to re-autoneg with a
+	 * different link partner.
+	 */
+	ret_val = e1000e_config_fc_after_link_up(hw);
+	if (ret_val)
+		e_dbg("Error configuring flow control\n");
+
+	return ret_val;
+}
+
+static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	s32 rc;
+
+	rc = e1000_init_mac_params_ich8lan(hw);
+	if (rc)
+		return rc;
+
+	rc = e1000_init_nvm_params_ich8lan(hw);
+	if (rc)
+		return rc;
+
+	switch (hw->mac.type) {
+	case e1000_ich8lan:
+	case e1000_ich9lan:
+	case e1000_ich10lan:
+		rc = e1000_init_phy_params_ich8lan(hw);
+		break;
+	case e1000_pchlan:
+	case e1000_pch2lan:
+	case e1000_pch_lpt:
+	case e1000_pch_spt:
+		rc = e1000_init_phy_params_pchlan(hw);
+		break;
+	default:
+		break;
+	}
+	if (rc)
+		return rc;
+
+	/* Disable Jumbo Frame support on parts with Intel 10/100 PHY or
+	 * on parts with MACsec enabled in NVM (reflected in CTRL_EXT).
+	 */
+	if ((adapter->hw.phy.type == e1000_phy_ife) ||
+	    ((adapter->hw.mac.type >= e1000_pch2lan) &&
+	     (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
+		adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
+		adapter->max_hw_frame_size = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
+
+		hw->mac.ops.blink_led = NULL;
+	}
+
+	if ((adapter->hw.mac.type == e1000_ich8lan) &&
+	    (adapter->hw.phy.type != e1000_phy_ife))
+		adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
+
+	/* Enable workaround for 82579 w/ ME enabled */
+	if ((adapter->hw.mac.type == e1000_pch2lan) &&
+	    (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+		adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;
+
+	return 0;
+}
+
+static DEFINE_MUTEX(nvm_mutex);
+
+/**
+ *  e1000_acquire_nvm_ich8lan - Acquire NVM mutex
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquires the mutex for performing NVM operations.
+ **/
+static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw __always_unused *hw)
+{
+	mutex_lock(&nvm_mutex);
+
+	return 0;
+}
+
+/**
+ *  e1000_release_nvm_ich8lan - Release NVM mutex
+ *  @hw: pointer to the HW structure
+ *
+ *  Releases the mutex used while performing NVM operations.
+ **/
+static void e1000_release_nvm_ich8lan(struct e1000_hw __always_unused *hw)
+{
+	mutex_unlock(&nvm_mutex);
+}
+
+/**
+ *  e1000_acquire_swflag_ich8lan - Acquire software control flag
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquires the software control flag for performing PHY and select
+ *  MAC CSR accesses.
+ **/
+static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
+{
+	u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
+	s32 ret_val = 0;
+
+	if (test_and_set_bit(__E1000_ACCESS_SHARED_RESOURCE,
+			     &hw->adapter->state)) {
+		e_dbg("contention for Phy access\n");
+		return -E1000_ERR_PHY;
+	}
+
+	while (timeout) {
+		extcnf_ctrl = er32(EXTCNF_CTRL);
+		if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG))
+			break;
+
+		mdelay(1);
+		timeout--;
+	}
+
+	if (!timeout) {
+		e_dbg("SW has already locked the resource.\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	timeout = SW_FLAG_TIMEOUT;
+
+	extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+	ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+	while (timeout) {
+		extcnf_ctrl = er32(EXTCNF_CTRL);
+		if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+			break;
+
+		mdelay(1);
+		timeout--;
+	}
+
+	if (!timeout) {
+		e_dbg("Failed to acquire the semaphore, FW or HW has it: FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\n",
+		      er32(FWSM), extcnf_ctrl);
+		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+out:
+	if (ret_val)
+		clear_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_release_swflag_ich8lan - Release software control flag
+ *  @hw: pointer to the HW structure
+ *
+ *  Releases the software control flag for performing PHY and select
+ *  MAC CSR accesses.
+ **/
+static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
+{
+	u32 extcnf_ctrl;
+
+	extcnf_ctrl = er32(EXTCNF_CTRL);
+
+	if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) {
+		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
+	} else {
+		e_dbg("Semaphore unexpectedly released by sw/fw/hw\n");
+	}
+
+	clear_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state);
+}
+
+/**
+ *  e1000_check_mng_mode_ich8lan - Checks management mode
+ *  @hw: pointer to the HW structure
+ *
+ *  This checks if the adapter has any manageability enabled.
+ *  This is a function pointer entry point only called by read/write
+ *  routines for the PHY and NVM parts.
+ **/
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
+{
+	u32 fwsm;
+
+	fwsm = er32(FWSM);
+	return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+		((fwsm & E1000_FWSM_MODE_MASK) ==
+		 (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+}
+
+/**
+ *  e1000_check_mng_mode_pchlan - Checks management mode
+ *  @hw: pointer to the HW structure
+ *
+ *  This checks if the adapter has iAMT enabled.
+ *  This is a function pointer entry point only called by read/write
+ *  routines for the PHY and NVM parts.
+ **/
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw)
+{
+	u32 fwsm;
+
+	fwsm = er32(FWSM);
+	return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+	    (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+}
+
+/**
+ *  e1000_rar_set_pch2lan - Set receive address register
+ *  @hw: pointer to the HW structure
+ *  @addr: pointer to the receive address
+ *  @index: receive address array register
+ *
+ *  Sets the receive address array register at index to the address passed
+ *  in by addr.  For 82579, RAR[0] is the base address register that is to
+ *  contain the MAC address but RAR[1-6] are reserved for manageability (ME).
+ *  Use SHRA[0-3] in place of those reserved for ME.
+ **/
+static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+	u32 rar_low, rar_high;
+
+	/* HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32)addr[0] |
+		   ((u32)addr[1] << 8) |
+		   ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+
+	rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
+
+	/* If MAC address zero, no need to set the AV bit */
+	if (rar_low || rar_high)
+		rar_high |= E1000_RAH_AV;
+
+	if (index == 0) {
+		ew32(RAL(index), rar_low);
+		e1e_flush();
+		ew32(RAH(index), rar_high);
+		e1e_flush();
+		return 0;
+	}
+
+	/* RAR[1-6] are owned by manageability.  Skip those and program the
+	 * next address into the SHRA register array.
+	 */
+	if (index < (u32)(hw->mac.rar_entry_count)) {
+		s32 ret_val;
+
+		ret_val = e1000_acquire_swflag_ich8lan(hw);
+		if (ret_val)
+			goto out;
+
+		ew32(SHRAL(index - 1), rar_low);
+		e1e_flush();
+		ew32(SHRAH(index - 1), rar_high);
+		e1e_flush();
+
+		e1000_release_swflag_ich8lan(hw);
+
+		/* verify the register updates */
+		if ((er32(SHRAL(index - 1)) == rar_low) &&
+		    (er32(SHRAH(index - 1)) == rar_high))
+			return 0;
+
+		e_dbg("SHRA[%d] might be locked by ME - FWSM=0x%8.8x\n",
+		      (index - 1), er32(FWSM));
+	}
+
+out:
+	e_dbg("Failed to write receive address at index %d\n", index);
+	return -E1000_ERR_CONFIG;
+}
+
+/**
+ *  e1000_rar_get_count_pch_lpt - Get the number of available SHRA
+ *  @hw: pointer to the HW structure
+ *
+ *  Get the number of available receive registers that the Host can
+ *  program. SHRA[0-10] are the shared receive address registers
+ *  that are shared between the Host and manageability engine (ME).
+ *  ME can reserve any number of addresses and the host needs to be
+ *  able to tell how many available registers it has access to.
+ **/
+static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw)
+{
+	u32 wlock_mac;
+	u32 num_entries;
+
+	wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK;
+	wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT;
+
+	switch (wlock_mac) {
+	case 0:
+		/* All SHRA[0..10] and RAR[0] available */
+		num_entries = hw->mac.rar_entry_count;
+		break;
+	case 1:
+		/* Only RAR[0] available */
+		num_entries = 1;
+		break;
+	default:
+		/* SHRA[0..(wlock_mac - 1)] available + RAR[0] */
+		num_entries = wlock_mac + 1;
+		break;
+	}
+
+	return num_entries;
+}
+
+/**
+ *  e1000_rar_set_pch_lpt - Set receive address registers
+ *  @hw: pointer to the HW structure
+ *  @addr: pointer to the receive address
+ *  @index: receive address array register
+ *
+ *  Sets the receive address register array at index to the address passed
+ *  in by addr. For LPT, RAR[0] is the base address register that is to
+ *  contain the MAC address. SHRA[0-10] are the shared receive address
+ *  registers that are shared between the Host and manageability engine (ME).
+ **/
+static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+	u32 rar_low, rar_high;
+	u32 wlock_mac;
+
+	/* HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
+		   ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+
+	rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
+
+	/* If MAC address zero, no need to set the AV bit */
+	if (rar_low || rar_high)
+		rar_high |= E1000_RAH_AV;
+
+	if (index == 0) {
+		ew32(RAL(index), rar_low);
+		e1e_flush();
+		ew32(RAH(index), rar_high);
+		e1e_flush();
+		return 0;
+	}
+
+	/* The manageability engine (ME) can lock certain SHRAR registers that
+	 * it is using - those registers are unavailable for use.
+	 */
+	if (index < hw->mac.rar_entry_count) {
+		wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK;
+		wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT;
+
+		/* Check if all SHRAR registers are locked */
+		if (wlock_mac == 1)
+			goto out;
+
+		if ((wlock_mac == 0) || (index <= wlock_mac)) {
+			s32 ret_val;
+
+			ret_val = e1000_acquire_swflag_ich8lan(hw);
+
+			if (ret_val)
+				goto out;
+
+			ew32(SHRAL_PCH_LPT(index - 1), rar_low);
+			e1e_flush();
+			ew32(SHRAH_PCH_LPT(index - 1), rar_high);
+			e1e_flush();
+
+			e1000_release_swflag_ich8lan(hw);
+
+			/* verify the register updates */
+			if ((er32(SHRAL_PCH_LPT(index - 1)) == rar_low) &&
+			    (er32(SHRAH_PCH_LPT(index - 1)) == rar_high))
+				return 0;
+		}
+	}
+
+out:
+	e_dbg("Failed to write receive address at index %d\n", index);
+	return -E1000_ERR_CONFIG;
+}
+
+/**
+ *  e1000_check_reset_block_ich8lan - Check if PHY reset is blocked
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks if firmware is blocking the reset of the PHY.
+ *  This is a function pointer entry point only called by
+ *  reset routines.
+ **/
+static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
+{
+	bool blocked = false;
+	int i = 0;
+
+	while ((blocked = !(er32(FWSM) & E1000_ICH_FWSM_RSPCIPHY)) &&
+	       (i++ < 10))
+		usleep_range(10000, 20000);
+	return blocked ? E1000_BLK_PHY_RESET : 0;
+}
+
+/**
+ *  e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states
+ *  @hw: pointer to the HW structure
+ *
+ *  Assumes semaphore already acquired.
+ *
+ **/
+static s32 e1000_write_smbus_addr(struct e1000_hw *hw)
+{
+	u16 phy_data;
+	u32 strap = er32(STRAP);
+	u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >>
+	    E1000_STRAP_SMT_FREQ_SHIFT;
+	s32 ret_val;
+
+	strap &= E1000_STRAP_SMBUS_ADDRESS_MASK;
+
+	ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data &= ~HV_SMB_ADDR_MASK;
+	phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT);
+	phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
+
+	if (hw->phy.type == e1000_phy_i217) {
+		/* Restore SMBus frequency */
+		if (freq--) {
+			phy_data &= ~HV_SMB_ADDR_FREQ_MASK;
+			phy_data |= (freq & (1 << 0)) <<
+			    HV_SMB_ADDR_FREQ_LOW_SHIFT;
+			phy_data |= (freq & (1 << 1)) <<
+			    (HV_SMB_ADDR_FREQ_HIGH_SHIFT - 1);
+		} else {
+			e_dbg("Unsupported SMB frequency in PHY\n");
+		}
+	}
+
+	return e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
+}
+
+/**
+ *  e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
+ *  @hw:   pointer to the HW structure
+ *
+ *  SW should configure the LCD from the NVM extended configuration region
+ *  as a workaround for certain parts.
+ **/
+static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
+	s32 ret_val = 0;
+	u16 word_addr, reg_data, reg_addr, phy_page = 0;
+
+	/* Initialize the PHY from the NVM on ICH platforms.  This
+	 * is needed due to an issue where the NVM configuration is
+	 * not properly autoloaded after power transitions.
+	 * Therefore, after each PHY reset, we will load the
+	 * configuration data out of the NVM manually.
+	 */
+	switch (hw->mac.type) {
+	case e1000_ich8lan:
+		if (phy->type != e1000_phy_igp_3)
+			return ret_val;
+
+		if ((hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) ||
+		    (hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_C)) {
+			sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+			break;
+		}
+		/* Fall-thru */
+	case e1000_pchlan:
+	case e1000_pch2lan:
+	case e1000_pch_lpt:
+	case e1000_pch_spt:
+		sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
+		break;
+	default:
+		return ret_val;
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	data = er32(FEXTNVM);
+	if (!(data & sw_cfg_mask))
+		goto release;
+
+	/* Make sure HW does not configure LCD from PHY
+	 * extended configuration before SW configuration
+	 */
+	data = er32(EXTCNF_CTRL);
+	if ((hw->mac.type < e1000_pch2lan) &&
+	    (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE))
+		goto release;
+
+	cnf_size = er32(EXTCNF_SIZE);
+	cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
+	cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
+	if (!cnf_size)
+		goto release;
+
+	cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
+	cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
+
+	if (((hw->mac.type == e1000_pchlan) &&
+	     !(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)) ||
+	    (hw->mac.type > e1000_pchlan)) {
+		/* HW configures the SMBus address and LEDs when the
+		 * OEM and LCD Write Enable bits are set in the NVM.
+		 * When both NVM bits are cleared, SW will configure
+		 * them instead.
+		 */
+		ret_val = e1000_write_smbus_addr(hw);
+		if (ret_val)
+			goto release;
+
+		data = er32(LEDCTL);
+		ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG,
+							(u16)data);
+		if (ret_val)
+			goto release;
+	}
+
+	/* Configure LCD from extended configuration region. */
+
+	/* cnf_base_addr is in DWORD */
+	word_addr = (u16)(cnf_base_addr << 1);
+
+	for (i = 0; i < cnf_size; i++) {
+		ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, &reg_data);
+		if (ret_val)
+			goto release;
+
+		ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
+					 1, &reg_addr);
+		if (ret_val)
+			goto release;
+
+		/* Save off the PHY page for future writes. */
+		if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
+			phy_page = reg_data;
+			continue;
+		}
+
+		reg_addr &= PHY_REG_MASK;
+		reg_addr |= phy_page;
+
+		ret_val = e1e_wphy_locked(hw, (u32)reg_addr, reg_data);
+		if (ret_val)
+			goto release;
+	}
+
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  e1000_k1_gig_workaround_hv - K1 Si workaround
+ *  @hw:   pointer to the HW structure
+ *  @link: link up bool flag
+ *
+ *  If K1 is enabled for 1Gbps, the MAC might stall when transitioning
+ *  from a lower speed.  This workaround disables K1 whenever link is at 1Gig
+ *  If link is down, the function will restore the default K1 setting located
+ *  in the NVM.
+ **/
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
+{
+	s32 ret_val = 0;
+	u16 status_reg = 0;
+	bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;
+
+	if (hw->mac.type != e1000_pchlan)
+		return 0;
+
+	/* Wrap the whole flow with the sw flag */
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
+	if (link) {
+		if (hw->phy.type == e1000_phy_82578) {
+			ret_val = e1e_rphy_locked(hw, BM_CS_STATUS,
+						  &status_reg);
+			if (ret_val)
+				goto release;
+
+			status_reg &= (BM_CS_STATUS_LINK_UP |
+				       BM_CS_STATUS_RESOLVED |
+				       BM_CS_STATUS_SPEED_MASK);
+
+			if (status_reg == (BM_CS_STATUS_LINK_UP |
+					   BM_CS_STATUS_RESOLVED |
+					   BM_CS_STATUS_SPEED_1000))
+				k1_enable = false;
+		}
+
+		if (hw->phy.type == e1000_phy_82577) {
+			ret_val = e1e_rphy_locked(hw, HV_M_STATUS, &status_reg);
+			if (ret_val)
+				goto release;
+
+			status_reg &= (HV_M_STATUS_LINK_UP |
+				       HV_M_STATUS_AUTONEG_COMPLETE |
+				       HV_M_STATUS_SPEED_MASK);
+
+			if (status_reg == (HV_M_STATUS_LINK_UP |
+					   HV_M_STATUS_AUTONEG_COMPLETE |
+					   HV_M_STATUS_SPEED_1000))
+				k1_enable = false;
+		}
+
+		/* Link stall fix for link up */
+		ret_val = e1e_wphy_locked(hw, PHY_REG(770, 19), 0x0100);
+		if (ret_val)
+			goto release;
+
+	} else {
+		/* Link stall fix for link down */
+		ret_val = e1e_wphy_locked(hw, PHY_REG(770, 19), 0x4100);
+		if (ret_val)
+			goto release;
+	}
+
+	ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);
+
+release:
+	hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_configure_k1_ich8lan - Configure K1 power state
+ *  @hw: pointer to the HW structure
+ *  @enable: K1 state to configure
+ *
+ *  Configure the K1 power state based on the provided parameter.
+ *  Assumes semaphore already acquired.
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ **/
+s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
+{
+	s32 ret_val;
+	u32 ctrl_reg = 0;
+	u32 ctrl_ext = 0;
+	u32 reg = 0;
+	u16 kmrn_reg = 0;
+
+	ret_val = e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+					      &kmrn_reg);
+	if (ret_val)
+		return ret_val;
+
+	if (k1_enable)
+		kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
+	else
+		kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
+
+	ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+					       kmrn_reg);
+	if (ret_val)
+		return ret_val;
+
+	usleep_range(20, 40);
+	ctrl_ext = er32(CTRL_EXT);
+	ctrl_reg = er32(CTRL);
+
+	reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+	reg |= E1000_CTRL_FRCSPD;
+	ew32(CTRL, reg);
+
+	ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
+	e1e_flush();
+	usleep_range(20, 40);
+	ew32(CTRL, ctrl_reg);
+	ew32(CTRL_EXT, ctrl_ext);
+	e1e_flush();
+	usleep_range(20, 40);
+
+	return 0;
+}
+
+/**
+ *  e1000_oem_bits_config_ich8lan - SW-based LCD Configuration
+ *  @hw:       pointer to the HW structure
+ *  @d0_state: boolean if entering d0 or d3 device state
+ *
+ *  SW will configure Gbe Disable and LPLU based on the NVM. The four bits are
+ *  collectively called OEM bits.  The OEM Write Enable bit and SW Config bit
+ *  in NVM determines whether HW should configure LPLU and Gbe Disable.
+ **/
+static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
+{
+	s32 ret_val = 0;
+	u32 mac_reg;
+	u16 oem_reg;
+
+	if (hw->mac.type < e1000_pchlan)
+		return ret_val;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	if (hw->mac.type == e1000_pchlan) {
+		mac_reg = er32(EXTCNF_CTRL);
+		if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
+			goto release;
+	}
+
+	mac_reg = er32(FEXTNVM);
+	if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
+		goto release;
+
+	mac_reg = er32(PHY_CTRL);
+
+	ret_val = e1e_rphy_locked(hw, HV_OEM_BITS, &oem_reg);
+	if (ret_val)
+		goto release;
+
+	oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU);
+
+	if (d0_state) {
+		if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE)
+			oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+		if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
+			oem_reg |= HV_OEM_BITS_LPLU;
+	} else {
+		if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE |
+			       E1000_PHY_CTRL_NOND0A_GBE_DISABLE))
+			oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+		if (mac_reg & (E1000_PHY_CTRL_D0A_LPLU |
+			       E1000_PHY_CTRL_NOND0A_LPLU))
+			oem_reg |= HV_OEM_BITS_LPLU;
+	}
+
+	/* Set Restart auto-neg to activate the bits */
+	if ((d0_state || (hw->mac.type != e1000_pchlan)) &&
+	    !hw->phy.ops.check_reset_block(hw))
+		oem_reg |= HV_OEM_BITS_RESTART_AN;
+
+	ret_val = e1e_wphy_locked(hw, HV_OEM_BITS, oem_reg);
+
+release:
+	hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
+ *  @hw:   pointer to the HW structure
+ **/
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 data;
+
+	ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data |= HV_KMRN_MDIO_SLOW;
+
+	ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+ *  done after every PHY reset.
+ **/
+static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 phy_data;
+
+	if (hw->mac.type != e1000_pchlan)
+		return 0;
+
+	/* Set MDIO slow mode before any other MDIO access */
+	if (hw->phy.type == e1000_phy_82577) {
+		ret_val = e1000_set_mdio_slow_mode_hv(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (((hw->phy.type == e1000_phy_82577) &&
+	     ((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
+	    ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
+		/* Disable generation of early preamble */
+		ret_val = e1e_wphy(hw, PHY_REG(769, 25), 0x4431);
+		if (ret_val)
+			return ret_val;
+
+		/* Preamble tuning for SSC */
+		ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (hw->phy.type == e1000_phy_82578) {
+		/* Return registers to default by doing a soft reset then
+		 * writing 0x3140 to the control register.
+		 */
+		if (hw->phy.revision < 2) {
+			e1000e_phy_sw_reset(hw);
+			ret_val = e1e_wphy(hw, MII_BMCR, 0x3140);
+		}
+	}
+
+	/* Select page 0 */
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	hw->phy.addr = 1;
+	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+	hw->phy.ops.release(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Configure the K1 Si workaround during phy reset assuming there is
+	 * link so that it disables K1 if link is in 1Gbps.
+	 */
+	ret_val = e1000_k1_gig_workaround_hv(hw, true);
+	if (ret_val)
+		return ret_val;
+
+	/* Workaround for link disconnects on a busy hub in half duplex */
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+	ret_val = e1e_rphy_locked(hw, BM_PORT_GEN_CFG, &phy_data);
+	if (ret_val)
+		goto release;
+	ret_val = e1e_wphy_locked(hw, BM_PORT_GEN_CFG, phy_data & 0x00FF);
+	if (ret_val)
+		goto release;
+
+	/* set MSE higher to enable link to stay up when noise is high */
+	ret_val = e1000_write_emi_reg_locked(hw, I82577_MSE_THRESHOLD, 0x0034);
+release:
+	hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_copy_rx_addrs_to_phy_ich8lan - Copy Rx addresses from MAC to PHY
+ *  @hw:   pointer to the HW structure
+ **/
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
+{
+	u32 mac_reg;
+	u16 i, phy_reg = 0;
+	s32 ret_val;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return;
+	ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+	if (ret_val)
+		goto release;
+
+	/* Copy both RAL/H (rar_entry_count) and SHRAL/H to PHY */
+	for (i = 0; i < (hw->mac.rar_entry_count); i++) {
+		mac_reg = er32(RAL(i));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_L(i),
+					   (u16)(mac_reg & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_M(i),
+					   (u16)((mac_reg >> 16) & 0xFFFF));
+
+		mac_reg = er32(RAH(i));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_H(i),
+					   (u16)(mac_reg & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_CTRL(i),
+					   (u16)((mac_reg & E1000_RAH_AV)
+						 >> 16));
+	}
+
+	e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+
+release:
+	hw->phy.ops.release(hw);
+}
+
+/**
+ *  e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
+ *  with 82579 PHY
+ *  @hw: pointer to the HW structure
+ *  @enable: flag to enable/disable workaround when enabling/disabling jumbos
+ **/
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
+{
+	s32 ret_val = 0;
+	u16 phy_reg, data;
+	u32 mac_reg;
+	u16 i;
+
+	if (hw->mac.type < e1000_pch2lan)
+		return 0;
+
+	/* disable Rx path while enabling/disabling workaround */
+	e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
+	ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | (1 << 14));
+	if (ret_val)
+		return ret_val;
+
+	if (enable) {
+		/* Write Rx addresses (rar_entry_count for RAL/H, and
+		 * SHRAL/H) and initial CRC values to the MAC
+		 */
+		for (i = 0; i < hw->mac.rar_entry_count; i++) {
+			u8 mac_addr[ETH_ALEN] = { 0 };
+			u32 addr_high, addr_low;
+
+			addr_high = er32(RAH(i));
+			if (!(addr_high & E1000_RAH_AV))
+				continue;
+			addr_low = er32(RAL(i));
+			mac_addr[0] = (addr_low & 0xFF);
+			mac_addr[1] = ((addr_low >> 8) & 0xFF);
+			mac_addr[2] = ((addr_low >> 16) & 0xFF);
+			mac_addr[3] = ((addr_low >> 24) & 0xFF);
+			mac_addr[4] = (addr_high & 0xFF);
+			mac_addr[5] = ((addr_high >> 8) & 0xFF);
+
+			ew32(PCH_RAICC(i), ~ether_crc_le(ETH_ALEN, mac_addr));
+		}
+
+		/* Write Rx addresses to the PHY */
+		e1000_copy_rx_addrs_to_phy_ich8lan(hw);
+
+		/* Enable jumbo frame workaround in the MAC */
+		mac_reg = er32(FFLT_DBG);
+		mac_reg &= ~(1 << 14);
+		mac_reg |= (7 << 15);
+		ew32(FFLT_DBG, mac_reg);
+
+		mac_reg = er32(RCTL);
+		mac_reg |= E1000_RCTL_SECRC;
+		ew32(RCTL, mac_reg);
+
+		ret_val = e1000e_read_kmrn_reg(hw,
+					       E1000_KMRNCTRLSTA_CTRL_OFFSET,
+					       &data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						data | (1 << 0));
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000e_read_kmrn_reg(hw,
+					       E1000_KMRNCTRLSTA_HD_CTRL,
+					       &data);
+		if (ret_val)
+			return ret_val;
+		data &= ~(0xF << 8);
+		data |= (0xB << 8);
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						data);
+		if (ret_val)
+			return ret_val;
+
+		/* Enable jumbo frame workaround in the PHY */
+		e1e_rphy(hw, PHY_REG(769, 23), &data);
+		data &= ~(0x7F << 5);
+		data |= (0x37 << 5);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, PHY_REG(769, 16), &data);
+		data &= ~(1 << 13);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, PHY_REG(776, 20), &data);
+		data &= ~(0x3FF << 2);
+		data |= (E1000_TX_PTR_GAP << 2);
+		ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xF100);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, HV_PM_CTRL, &data);
+		ret_val = e1e_wphy(hw, HV_PM_CTRL, data | (1 << 10));
+		if (ret_val)
+			return ret_val;
+	} else {
+		/* Write MAC register values back to h/w defaults */
+		mac_reg = er32(FFLT_DBG);
+		mac_reg &= ~(0xF << 14);
+		ew32(FFLT_DBG, mac_reg);
+
+		mac_reg = er32(RCTL);
+		mac_reg &= ~E1000_RCTL_SECRC;
+		ew32(RCTL, mac_reg);
+
+		ret_val = e1000e_read_kmrn_reg(hw,
+					       E1000_KMRNCTRLSTA_CTRL_OFFSET,
+					       &data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						data & ~(1 << 0));
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000e_read_kmrn_reg(hw,
+					       E1000_KMRNCTRLSTA_HD_CTRL,
+					       &data);
+		if (ret_val)
+			return ret_val;
+		data &= ~(0xF << 8);
+		data |= (0xB << 8);
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						data);
+		if (ret_val)
+			return ret_val;
+
+		/* Write PHY register values back to h/w defaults */
+		e1e_rphy(hw, PHY_REG(769, 23), &data);
+		data &= ~(0x7F << 5);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, PHY_REG(769, 16), &data);
+		data |= (1 << 13);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, PHY_REG(776, 20), &data);
+		data &= ~(0x3FF << 2);
+		data |= (0x8 << 2);
+		ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, HV_PM_CTRL, &data);
+		ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~(1 << 10));
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* re-enable Rx path after enabling/disabling workaround */
+	return e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
+}
+
+/**
+ *  e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+ *  done after every PHY reset.
+ **/
+static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	if (hw->mac.type != e1000_pch2lan)
+		return 0;
+
+	/* Set MDIO slow mode before any other MDIO access */
+	ret_val = e1000_set_mdio_slow_mode_hv(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+	/* set MSE higher to enable link to stay up when noise is high */
+	ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_THRESHOLD, 0x0034);
+	if (ret_val)
+		goto release;
+	/* drop link after 5 times MSE threshold was reached */
+	ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_LINK_DOWN, 0x0005);
+release:
+	hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_k1_gig_workaround_lv - K1 Si workaround
+ *  @hw:   pointer to the HW structure
+ *
+ *  Workaround to set the K1 beacon duration for 82579 parts in 10Mbps
+ *  Disable K1 in 1000Mbps and 100Mbps
+ **/
+static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 status_reg = 0;
+
+	if (hw->mac.type != e1000_pch2lan)
+		return 0;
+
+	/* Set K1 beacon duration based on 10Mbs speed */
+	ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg);
+	if (ret_val)
+		return ret_val;
+
+	if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE))
+	    == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) {
+		if (status_reg &
+		    (HV_M_STATUS_SPEED_1000 | HV_M_STATUS_SPEED_100)) {
+			u16 pm_phy_reg;
+
+			/* LV 1G/100 Packet drop issue wa  */
+			ret_val = e1e_rphy(hw, HV_PM_CTRL, &pm_phy_reg);
+			if (ret_val)
+				return ret_val;
+			pm_phy_reg &= ~HV_PM_CTRL_K1_ENABLE;
+			ret_val = e1e_wphy(hw, HV_PM_CTRL, pm_phy_reg);
+			if (ret_val)
+				return ret_val;
+		} else {
+			u32 mac_reg;
+
+			mac_reg = er32(FEXTNVM4);
+			mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
+			mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
+			ew32(FEXTNVM4, mac_reg);
+		}
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware
+ *  @hw:   pointer to the HW structure
+ *  @gate: boolean set to true to gate, false to ungate
+ *
+ *  Gate/ungate the automatic PHY configuration via hardware; perform
+ *  the configuration via software instead.
+ **/
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate)
+{
+	u32 extcnf_ctrl;
+
+	if (hw->mac.type < e1000_pch2lan)
+		return;
+
+	extcnf_ctrl = er32(EXTCNF_CTRL);
+
+	if (gate)
+		extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+	else
+		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+
+	ew32(EXTCNF_CTRL, extcnf_ctrl);
+}
+
+/**
+ *  e1000_lan_init_done_ich8lan - Check for PHY config completion
+ *  @hw: pointer to the HW structure
+ *
+ *  Check the appropriate indication the MAC has finished configuring the
+ *  PHY after a software reset.
+ **/
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
+{
+	u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;
+
+	/* Wait for basic configuration completes before proceeding */
+	do {
+		data = er32(STATUS);
+		data &= E1000_STATUS_LAN_INIT_DONE;
+		usleep_range(100, 200);
+	} while ((!data) && --loop);
+
+	/* If basic configuration is incomplete before the above loop
+	 * count reaches 0, loading the configuration from NVM will
+	 * leave the PHY in a bad state possibly resulting in no link.
+	 */
+	if (loop == 0)
+		e_dbg("LAN_INIT_DONE not set, increase timeout\n");
+
+	/* Clear the Init Done bit for the next init event */
+	data = er32(STATUS);
+	data &= ~E1000_STATUS_LAN_INIT_DONE;
+	ew32(STATUS, data);
+}
+
+/**
+ *  e1000_post_phy_reset_ich8lan - Perform steps required after a PHY reset
+ *  @hw: pointer to the HW structure
+ **/
+static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 reg;
+
+	if (hw->phy.ops.check_reset_block(hw))
+		return 0;
+
+	/* Allow time for h/w to get to quiescent state after reset */
+	usleep_range(10000, 20000);
+
+	/* Perform any necessary post-reset workarounds */
+	switch (hw->mac.type) {
+	case e1000_pchlan:
+		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	case e1000_pch2lan:
+		ret_val = e1000_lv_phy_workarounds_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	default:
+		break;
+	}
+
+	/* Clear the host wakeup bit after lcd reset */
+	if (hw->mac.type >= e1000_pchlan) {
+		e1e_rphy(hw, BM_PORT_GEN_CFG, &reg);
+		reg &= ~BM_WUC_HOST_WU_BIT;
+		e1e_wphy(hw, BM_PORT_GEN_CFG, reg);
+	}
+
+	/* Configure the LCD with the extended configuration region in NVM */
+	ret_val = e1000_sw_lcd_config_ich8lan(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Configure the LCD with the OEM bits in NVM */
+	ret_val = e1000_oem_bits_config_ich8lan(hw, true);
+
+	if (hw->mac.type == e1000_pch2lan) {
+		/* Ungate automatic PHY configuration on non-managed 82579 */
+		if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+			usleep_range(10000, 20000);
+			e1000_gate_hw_phy_config_ich8lan(hw, false);
+		}
+
+		/* Set EEE LPI Update Timer to 200usec */
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000_write_emi_reg_locked(hw,
+						     I82579_LPI_UPDATE_TIMER,
+						     0x1387);
+		hw->phy.ops.release(hw);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_hw_reset_ich8lan - Performs a PHY reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Resets the PHY
+ *  This is a function pointer entry point called by drivers
+ *  or other shared routines.
+ **/
+static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	/* Gate automatic PHY configuration by hardware on non-managed 82579 */
+	if ((hw->mac.type == e1000_pch2lan) &&
+	    !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+		e1000_gate_hw_phy_config_ich8lan(hw, true);
+
+	ret_val = e1000e_phy_hw_reset_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	return e1000_post_phy_reset_ich8lan(hw);
+}
+
+/**
+ *  e1000_set_lplu_state_pchlan - Set Low Power Link Up state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU state according to the active flag.  For PCH, if OEM write
+ *  bit are disabled in the NVM, writing the LPLU bits in the MAC will not set
+ *  the phy speed. This function will manually set the LPLU bit and restart
+ *  auto-neg as hw would do. D3 and D0 LPLU will call the same function
+ *  since it configures the same bit.
+ **/
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
+{
+	s32 ret_val;
+	u16 oem_reg;
+
+	ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg);
+	if (ret_val)
+		return ret_val;
+
+	if (active)
+		oem_reg |= HV_OEM_BITS_LPLU;
+	else
+		oem_reg &= ~HV_OEM_BITS_LPLU;
+
+	if (!hw->phy.ops.check_reset_block(hw))
+		oem_reg |= HV_OEM_BITS_RESTART_AN;
+
+	return e1e_wphy(hw, HV_OEM_BITS, oem_reg);
+}
+
+/**
+ *  e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU D0 state according to the active flag.  When
+ *  activating LPLU this function also disables smart speed
+ *  and vice versa.  LPLU will not be activated unless the
+ *  device autonegotiation advertisement meets standards of
+ *  either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 phy_ctrl;
+	s32 ret_val = 0;
+	u16 data;
+
+	if (phy->type == e1000_phy_ife)
+		return 0;
+
+	phy_ctrl = er32(PHY_CTRL);
+
+	if (active) {
+		phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
+		ew32(PHY_CTRL, phy_ctrl);
+
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
+		/* Call gig speed drop workaround on LPLU before accessing
+		 * any PHY registers
+		 */
+		if (hw->mac.type == e1000_ich8lan)
+			e1000e_gig_downshift_workaround_ich8lan(hw);
+
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+		if (ret_val)
+			return ret_val;
+		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
+		if (ret_val)
+			return ret_val;
+	} else {
+		phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
+		ew32(PHY_CTRL, phy_ctrl);
+
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
+		/* LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+
+			data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		} else if (phy->smart_speed == e1000_smart_speed_off) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU D3 state according to the active flag.  When
+ *  activating LPLU this function also disables smart speed
+ *  and vice versa.  LPLU will not be activated unless the
+ *  device autonegotiation advertisement meets standards of
+ *  either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 phy_ctrl;
+	s32 ret_val = 0;
+	u16 data;
+
+	phy_ctrl = er32(PHY_CTRL);
+
+	if (!active) {
+		phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+		ew32(PHY_CTRL, phy_ctrl);
+
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
+		/* LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+
+			data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		} else if (phy->smart_speed == e1000_smart_speed_off) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		}
+	} else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+		   (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+		   (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+		phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
+		ew32(PHY_CTRL, phy_ctrl);
+
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
+		/* Call gig speed drop workaround on LPLU before accessing
+		 * any PHY registers
+		 */
+		if (hw->mac.type == e1000_ich8lan)
+			e1000e_gig_downshift_workaround_ich8lan(hw);
+
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+		if (ret_val)
+			return ret_val;
+
+		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1
+ *  @hw: pointer to the HW structure
+ *  @bank:  pointer to the variable that returns the active bank
+ *
+ *  Reads signature byte from the NVM using the flash access registers.
+ *  Word 0x13 bits 15:14 = 10b indicate a valid signature for that bank.
+ **/
+static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
+{
+	u32 eecd;
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 bank1_offset = nvm->flash_bank_size * sizeof(u16);
+	u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1;
+	u8 sig_byte = 0;
+	s32 ret_val;
+
+	switch (hw->mac.type) {
+		/* In SPT, read from the CTRL_EXT reg instead of
+		 * accessing the sector valid bits from the nvm
+		 */
+	case e1000_pch_spt:
+		*bank = er32(CTRL_EXT)
+		    & E1000_CTRL_EXT_NVMVS;
+		if ((*bank == 0) || (*bank == 1)) {
+			e_dbg("ERROR: No valid NVM bank present\n");
+			return -E1000_ERR_NVM;
+		} else {
+			*bank = *bank - 2;
+			return 0;
+		}
+		break;
+	case e1000_ich8lan:
+	case e1000_ich9lan:
+		eecd = er32(EECD);
+		if ((eecd & E1000_EECD_SEC1VAL_VALID_MASK) ==
+		    E1000_EECD_SEC1VAL_VALID_MASK) {
+			if (eecd & E1000_EECD_SEC1VAL)
+				*bank = 1;
+			else
+				*bank = 0;
+
+			return 0;
+		}
+		e_dbg("Unable to determine valid NVM bank via EEC - reading flash signature\n");
+		/* fall-thru */
+	default:
+		/* set bank to 0 in case flash read fails */
+		*bank = 0;
+
+		/* Check bank 0 */
+		ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset,
+							&sig_byte);
+		if (ret_val)
+			return ret_val;
+		if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
+		    E1000_ICH_NVM_SIG_VALUE) {
+			*bank = 0;
+			return 0;
+		}
+
+		/* Check bank 1 */
+		ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset +
+							bank1_offset,
+							&sig_byte);
+		if (ret_val)
+			return ret_val;
+		if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
+		    E1000_ICH_NVM_SIG_VALUE) {
+			*bank = 1;
+			return 0;
+		}
+
+		e_dbg("ERROR: No valid NVM bank present\n");
+		return -E1000_ERR_NVM;
+	}
+}
+
+/**
+ *  e1000_read_nvm_spt - NVM access for SPT
+ *  @hw: pointer to the HW structure
+ *  @offset: The offset (in bytes) of the word(s) to read.
+ *  @words: Size of data to read in words.
+ *  @data: pointer to the word(s) to read at offset.
+ *
+ *  Reads a word(s) from the NVM
+ **/
+static s32 e1000_read_nvm_spt(struct e1000_hw *hw, u16 offset, u16 words,
+			      u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 act_offset;
+	s32 ret_val = 0;
+	u32 bank = 0;
+	u32 dword = 0;
+	u16 offset_to_read;
+	u16 i;
+
+	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
+	    (words == 0)) {
+		e_dbg("nvm parameter(s) out of bounds\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+	nvm->ops.acquire(hw);
+
+	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+	if (ret_val) {
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
+		bank = 0;
+	}
+
+	act_offset = (bank) ? nvm->flash_bank_size : 0;
+	act_offset += offset;
+
+	ret_val = 0;
+
+	for (i = 0; i < words; i += 2) {
+		if (words - i == 1) {
+			if (dev_spec->shadow_ram[offset + i].modified) {
+				data[i] =
+				    dev_spec->shadow_ram[offset + i].value;
+			} else {
+				offset_to_read = act_offset + i -
+				    ((act_offset + i) % 2);
+				ret_val =
+				  e1000_read_flash_dword_ich8lan(hw,
+								 offset_to_read,
+								 &dword);
+				if (ret_val)
+					break;
+				if ((act_offset + i) % 2 == 0)
+					data[i] = (u16)(dword & 0xFFFF);
+				else
+					data[i] = (u16)((dword >> 16) & 0xFFFF);
+			}
+		} else {
+			offset_to_read = act_offset + i;
+			if (!(dev_spec->shadow_ram[offset + i].modified) ||
+			    !(dev_spec->shadow_ram[offset + i + 1].modified)) {
+				ret_val =
+				  e1000_read_flash_dword_ich8lan(hw,
+								 offset_to_read,
+								 &dword);
+				if (ret_val)
+					break;
+			}
+			if (dev_spec->shadow_ram[offset + i].modified)
+				data[i] =
+				    dev_spec->shadow_ram[offset + i].value;
+			else
+				data[i] = (u16)(dword & 0xFFFF);
+			if (dev_spec->shadow_ram[offset + i].modified)
+				data[i + 1] =
+				    dev_spec->shadow_ram[offset + i + 1].value;
+			else
+				data[i + 1] = (u16)(dword >> 16 & 0xFFFF);
+		}
+	}
+
+	nvm->ops.release(hw);
+
+out:
+	if (ret_val)
+		e_dbg("NVM read error: %d\n", ret_val);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_nvm_ich8lan - Read word(s) from the NVM
+ *  @hw: pointer to the HW structure
+ *  @offset: The offset (in bytes) of the word(s) to read.
+ *  @words: Size of data to read in words
+ *  @data: Pointer to the word(s) to read at offset.
+ *
+ *  Reads a word(s) from the NVM using the flash access registers.
+ **/
+static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
+				  u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 act_offset;
+	s32 ret_val = 0;
+	u32 bank = 0;
+	u16 i, word;
+
+	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
+	    (words == 0)) {
+		e_dbg("nvm parameter(s) out of bounds\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+
+	nvm->ops.acquire(hw);
+
+	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+	if (ret_val) {
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
+		bank = 0;
+	}
+
+	act_offset = (bank) ? nvm->flash_bank_size : 0;
+	act_offset += offset;
+
+	ret_val = 0;
+	for (i = 0; i < words; i++) {
+		if (dev_spec->shadow_ram[offset + i].modified) {
+			data[i] = dev_spec->shadow_ram[offset + i].value;
+		} else {
+			ret_val = e1000_read_flash_word_ich8lan(hw,
+								act_offset + i,
+								&word);
+			if (ret_val)
+				break;
+			data[i] = word;
+		}
+	}
+
+	nvm->ops.release(hw);
+
+out:
+	if (ret_val)
+		e_dbg("NVM read error: %d\n", ret_val);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_flash_cycle_init_ich8lan - Initialize flash
+ *  @hw: pointer to the HW structure
+ *
+ *  This function does initial flash setup so that a new read/write/erase cycle
+ *  can be started.
+ **/
+static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
+{
+	union ich8_hws_flash_status hsfsts;
+	s32 ret_val = -E1000_ERR_NVM;
+
+	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+
+	/* Check if the flash descriptor is valid */
+	if (!hsfsts.hsf_status.fldesvalid) {
+		e_dbg("Flash descriptor invalid.  SW Sequencing must be used.\n");
+		return -E1000_ERR_NVM;
+	}
+
+	/* Clear FCERR and DAEL in hw status by writing 1 */
+	hsfsts.hsf_status.flcerr = 1;
+	hsfsts.hsf_status.dael = 1;
+	if (hw->mac.type == e1000_pch_spt)
+		ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval & 0xFFFF);
+	else
+		ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+
+	/* Either we should have a hardware SPI cycle in progress
+	 * bit to check against, in order to start a new cycle or
+	 * FDONE bit should be changed in the hardware so that it
+	 * is 1 after hardware reset, which can then be used as an
+	 * indication whether a cycle is in progress or has been
+	 * completed.
+	 */
+
+	if (!hsfsts.hsf_status.flcinprog) {
+		/* There is no cycle running at present,
+		 * so we can start a cycle.
+		 * Begin by setting Flash Cycle Done.
+		 */
+		hsfsts.hsf_status.flcdone = 1;
+		if (hw->mac.type == e1000_pch_spt)
+			ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval & 0xFFFF);
+		else
+			ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+		ret_val = 0;
+	} else {
+		s32 i;
+
+		/* Otherwise poll for sometime so the current
+		 * cycle has a chance to end before giving up.
+		 */
+		for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
+			hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+			if (!hsfsts.hsf_status.flcinprog) {
+				ret_val = 0;
+				break;
+			}
+			udelay(1);
+		}
+		if (!ret_val) {
+			/* Successful in waiting for previous cycle to timeout,
+			 * now set the Flash Cycle Done.
+			 */
+			hsfsts.hsf_status.flcdone = 1;
+			if (hw->mac.type == e1000_pch_spt)
+				ew32flash(ICH_FLASH_HSFSTS,
+					  hsfsts.regval & 0xFFFF);
+			else
+				ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+		} else {
+			e_dbg("Flash controller busy, cannot get access\n");
+		}
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_flash_cycle_ich8lan - Starts flash cycle (read/write/erase)
+ *  @hw: pointer to the HW structure
+ *  @timeout: maximum time to wait for completion
+ *
+ *  This function starts a flash cycle and waits for its completion.
+ **/
+static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout)
+{
+	union ich8_hws_flash_ctrl hsflctl;
+	union ich8_hws_flash_status hsfsts;
+	u32 i = 0;
+
+	/* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
+	if (hw->mac.type == e1000_pch_spt)
+		hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16;
+	else
+		hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+	hsflctl.hsf_ctrl.flcgo = 1;
+
+	if (hw->mac.type == e1000_pch_spt)
+		ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16);
+	else
+		ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+
+	/* wait till FDONE bit is set to 1 */
+	do {
+		hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+		if (hsfsts.hsf_status.flcdone)
+			break;
+		udelay(1);
+	} while (i++ < timeout);
+
+	if (hsfsts.hsf_status.flcdone && !hsfsts.hsf_status.flcerr)
+		return 0;
+
+	return -E1000_ERR_NVM;
+}
+
+/**
+ *  e1000_read_flash_dword_ich8lan - Read dword from flash
+ *  @hw: pointer to the HW structure
+ *  @offset: offset to data location
+ *  @data: pointer to the location for storing the data
+ *
+ *  Reads the flash dword at offset into data.  Offset is converted
+ *  to bytes before read.
+ **/
+static s32 e1000_read_flash_dword_ich8lan(struct e1000_hw *hw, u32 offset,
+					  u32 *data)
+{
+	/* Must convert word offset into bytes. */
+	offset <<= 1;
+	return e1000_read_flash_data32_ich8lan(hw, offset, data);
+}
+
+/**
+ *  e1000_read_flash_word_ich8lan - Read word from flash
+ *  @hw: pointer to the HW structure
+ *  @offset: offset to data location
+ *  @data: pointer to the location for storing the data
+ *
+ *  Reads the flash word at offset into data.  Offset is converted
+ *  to bytes before read.
+ **/
+static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u16 *data)
+{
+	/* Must convert offset into bytes. */
+	offset <<= 1;
+
+	return e1000_read_flash_data_ich8lan(hw, offset, 2, data);
+}
+
+/**
+ *  e1000_read_flash_byte_ich8lan - Read byte from flash
+ *  @hw: pointer to the HW structure
+ *  @offset: The offset of the byte to read.
+ *  @data: Pointer to a byte to store the value read.
+ *
+ *  Reads a single byte from the NVM using the flash access registers.
+ **/
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 *data)
+{
+	s32 ret_val;
+	u16 word = 0;
+
+	/* In SPT, only 32 bits access is supported,
+	 * so this function should not be called.
+	 */
+	if (hw->mac.type == e1000_pch_spt)
+		return -E1000_ERR_NVM;
+	else
+		ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word);
+
+	if (ret_val)
+		return ret_val;
+
+	*data = (u8)word;
+
+	return 0;
+}
+
+/**
+ *  e1000_read_flash_data_ich8lan - Read byte or word from NVM
+ *  @hw: pointer to the HW structure
+ *  @offset: The offset (in bytes) of the byte or word to read.
+ *  @size: Size of data to read, 1=byte 2=word
+ *  @data: Pointer to the word to store the value read.
+ *
+ *  Reads a byte or word from the NVM using the flash access registers.
+ **/
+static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 size, u16 *data)
+{
+	union ich8_hws_flash_status hsfsts;
+	union ich8_hws_flash_ctrl hsflctl;
+	u32 flash_linear_addr;
+	u32 flash_data = 0;
+	s32 ret_val = -E1000_ERR_NVM;
+	u8 count = 0;
+
+	if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
+		return -E1000_ERR_NVM;
+
+	flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) +
+			     hw->nvm.flash_base_addr);
+
+	do {
+		udelay(1);
+		/* Steps */
+		ret_val = e1000_flash_cycle_init_ich8lan(hw);
+		if (ret_val)
+			break;
+
+		hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+		/* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+		hsflctl.hsf_ctrl.fldbcount = size - 1;
+		hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
+		ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+
+		ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+
+		ret_val =
+		    e1000_flash_cycle_ich8lan(hw,
+					      ICH_FLASH_READ_COMMAND_TIMEOUT);
+
+		/* Check if FCERR is set to 1, if set to 1, clear it
+		 * and try the whole sequence a few more times, else
+		 * read in (shift in) the Flash Data0, the order is
+		 * least significant byte first msb to lsb
+		 */
+		if (!ret_val) {
+			flash_data = er32flash(ICH_FLASH_FDATA0);
+			if (size == 1)
+				*data = (u8)(flash_data & 0x000000FF);
+			else if (size == 2)
+				*data = (u16)(flash_data & 0x0000FFFF);
+			break;
+		} else {
+			/* If we've gotten here, then things are probably
+			 * completely hosed, but if the error condition is
+			 * detected, it won't hurt to give it another try...
+			 * ICH_FLASH_CYCLE_REPEAT_COUNT times.
+			 */
+			hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+			if (hsfsts.hsf_status.flcerr) {
+				/* Repeat for some time before giving up. */
+				continue;
+			} else if (!hsfsts.hsf_status.flcdone) {
+				e_dbg("Timeout error - flash cycle did not complete.\n");
+				break;
+			}
+		}
+	} while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_flash_data32_ich8lan - Read dword from NVM
+ *  @hw: pointer to the HW structure
+ *  @offset: The offset (in bytes) of the dword to read.
+ *  @data: Pointer to the dword to store the value read.
+ *
+ *  Reads a byte or word from the NVM using the flash access registers.
+ **/
+
+static s32 e1000_read_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset,
+					   u32 *data)
+{
+	union ich8_hws_flash_status hsfsts;
+	union ich8_hws_flash_ctrl hsflctl;
+	u32 flash_linear_addr;
+	s32 ret_val = -E1000_ERR_NVM;
+	u8 count = 0;
+
+	if (offset > ICH_FLASH_LINEAR_ADDR_MASK ||
+	    hw->mac.type != e1000_pch_spt)
+		return -E1000_ERR_NVM;
+	flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) +
+			     hw->nvm.flash_base_addr);
+
+	do {
+		udelay(1);
+		/* Steps */
+		ret_val = e1000_flash_cycle_init_ich8lan(hw);
+		if (ret_val)
+			break;
+		/* In SPT, This register is in Lan memory space, not flash.
+		 * Therefore, only 32 bit access is supported
+		 */
+		hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16;
+
+		/* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+		hsflctl.hsf_ctrl.fldbcount = sizeof(u32) - 1;
+		hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
+		/* In SPT, This register is in Lan memory space, not flash.
+		 * Therefore, only 32 bit access is supported
+		 */
+		ew32flash(ICH_FLASH_HSFSTS, (u32)hsflctl.regval << 16);
+		ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+
+		ret_val =
+		   e1000_flash_cycle_ich8lan(hw,
+					     ICH_FLASH_READ_COMMAND_TIMEOUT);
+
+		/* Check if FCERR is set to 1, if set to 1, clear it
+		 * and try the whole sequence a few more times, else
+		 * read in (shift in) the Flash Data0, the order is
+		 * least significant byte first msb to lsb
+		 */
+		if (!ret_val) {
+			*data = er32flash(ICH_FLASH_FDATA0);
+			break;
+		} else {
+			/* If we've gotten here, then things are probably
+			 * completely hosed, but if the error condition is
+			 * detected, it won't hurt to give it another try...
+			 * ICH_FLASH_CYCLE_REPEAT_COUNT times.
+			 */
+			hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+			if (hsfsts.hsf_status.flcerr) {
+				/* Repeat for some time before giving up. */
+				continue;
+			} else if (!hsfsts.hsf_status.flcdone) {
+				e_dbg("Timeout error - flash cycle did not complete.\n");
+				break;
+			}
+		}
+	} while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_nvm_ich8lan - Write word(s) to the NVM
+ *  @hw: pointer to the HW structure
+ *  @offset: The offset (in bytes) of the word(s) to write.
+ *  @words: Size of data to write in words
+ *  @data: Pointer to the word(s) to write at offset.
+ *
+ *  Writes a byte or word to the NVM using the flash access registers.
+ **/
+static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
+				   u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u16 i;
+
+	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
+	    (words == 0)) {
+		e_dbg("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	nvm->ops.acquire(hw);
+
+	for (i = 0; i < words; i++) {
+		dev_spec->shadow_ram[offset + i].modified = true;
+		dev_spec->shadow_ram[offset + i].value = data[i];
+	}
+
+	nvm->ops.release(hw);
+
+	return 0;
+}
+
+/**
+ *  e1000_update_nvm_checksum_spt - Update the checksum for NVM
+ *  @hw: pointer to the HW structure
+ *
+ *  The NVM checksum is updated by calling the generic update_nvm_checksum,
+ *  which writes the checksum to the shadow ram.  The changes in the shadow
+ *  ram are then committed to the EEPROM by processing each bank at a time
+ *  checking for the modified bit and writing only the pending changes.
+ *  After a successful commit, the shadow ram is cleared and is ready for
+ *  future writes.
+ **/
+static s32 e1000_update_nvm_checksum_spt(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 i, act_offset, new_bank_offset, old_bank_offset, bank;
+	s32 ret_val;
+	u32 dword = 0;
+
+	ret_val = e1000e_update_nvm_checksum_generic(hw);
+	if (ret_val)
+		goto out;
+
+	if (nvm->type != e1000_nvm_flash_sw)
+		goto out;
+
+	nvm->ops.acquire(hw);
+
+	/* We're writing to the opposite bank so if we're on bank 1,
+	 * write to bank 0 etc.  We also need to erase the segment that
+	 * is going to be written
+	 */
+	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+	if (ret_val) {
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
+		bank = 0;
+	}
+
+	if (bank == 0) {
+		new_bank_offset = nvm->flash_bank_size;
+		old_bank_offset = 0;
+		ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
+		if (ret_val)
+			goto release;
+	} else {
+		old_bank_offset = nvm->flash_bank_size;
+		new_bank_offset = 0;
+		ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
+		if (ret_val)
+			goto release;
+	}
+	for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i += 2) {
+		/* Determine whether to write the value stored
+		 * in the other NVM bank or a modified value stored
+		 * in the shadow RAM
+		 */
+		ret_val = e1000_read_flash_dword_ich8lan(hw,
+							 i + old_bank_offset,
+							 &dword);
+
+		if (dev_spec->shadow_ram[i].modified) {
+			dword &= 0xffff0000;
+			dword |= (dev_spec->shadow_ram[i].value & 0xffff);
+		}
+		if (dev_spec->shadow_ram[i + 1].modified) {
+			dword &= 0x0000ffff;
+			dword |= ((dev_spec->shadow_ram[i + 1].value & 0xffff)
+				  << 16);
+		}
+		if (ret_val)
+			break;
+
+		/* If the word is 0x13, then make sure the signature bits
+		 * (15:14) are 11b until the commit has completed.
+		 * This will allow us to write 10b which indicates the
+		 * signature is valid.  We want to do this after the write
+		 * has completed so that we don't mark the segment valid
+		 * while the write is still in progress
+		 */
+		if (i == E1000_ICH_NVM_SIG_WORD - 1)
+			dword |= E1000_ICH_NVM_SIG_MASK << 16;
+
+		/* Convert offset to bytes. */
+		act_offset = (i + new_bank_offset) << 1;
+
+		usleep_range(100, 200);
+
+		/* Write the data to the new bank. Offset in words */
+		act_offset = i + new_bank_offset;
+		ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset,
+								dword);
+		if (ret_val)
+			break;
+	}
+
+	/* Don't bother writing the segment valid bits if sector
+	 * programming failed.
+	 */
+	if (ret_val) {
+		/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
+		e_dbg("Flash commit failed.\n");
+		goto release;
+	}
+
+	/* Finally validate the new segment by setting bit 15:14
+	 * to 10b in word 0x13 , this can be done without an
+	 * erase as well since these bits are 11 to start with
+	 * and we need to change bit 14 to 0b
+	 */
+	act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
+
+	/*offset in words but we read dword */
+	--act_offset;
+	ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, &dword);
+
+	if (ret_val)
+		goto release;
+
+	dword &= 0xBFFFFFFF;
+	ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, dword);
+
+	if (ret_val)
+		goto release;
+
+	/* And invalidate the previously valid segment by setting
+	 * its signature word (0x13) high_byte to 0b. This can be
+	 * done without an erase because flash erase sets all bits
+	 * to 1's. We can write 1's to 0's without an erase
+	 */
+	act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
+
+	/* offset in words but we read dword */
+	act_offset = old_bank_offset + E1000_ICH_NVM_SIG_WORD - 1;
+	ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, &dword);
+
+	if (ret_val)
+		goto release;
+
+	dword &= 0x00FFFFFF;
+	ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, dword);
+
+	if (ret_val)
+		goto release;
+
+	/* Great!  Everything worked, we can now clear the cached entries. */
+	for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
+		dev_spec->shadow_ram[i].modified = false;
+		dev_spec->shadow_ram[i].value = 0xFFFF;
+	}
+
+release:
+	nvm->ops.release(hw);
+
+	/* Reload the EEPROM, or else modifications will not appear
+	 * until after the next adapter reset.
+	 */
+	if (!ret_val) {
+		nvm->ops.reload(hw);
+		usleep_range(10000, 20000);
+	}
+
+out:
+	if (ret_val)
+		e_dbg("NVM update error: %d\n", ret_val);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM
+ *  @hw: pointer to the HW structure
+ *
+ *  The NVM checksum is updated by calling the generic update_nvm_checksum,
+ *  which writes the checksum to the shadow ram.  The changes in the shadow
+ *  ram are then committed to the EEPROM by processing each bank at a time
+ *  checking for the modified bit and writing only the pending changes.
+ *  After a successful commit, the shadow ram is cleared and is ready for
+ *  future writes.
+ **/
+static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 i, act_offset, new_bank_offset, old_bank_offset, bank;
+	s32 ret_val;
+	u16 data = 0;
+
+	ret_val = e1000e_update_nvm_checksum_generic(hw);
+	if (ret_val)
+		goto out;
+
+	if (nvm->type != e1000_nvm_flash_sw)
+		goto out;
+
+	nvm->ops.acquire(hw);
+
+	/* We're writing to the opposite bank so if we're on bank 1,
+	 * write to bank 0 etc.  We also need to erase the segment that
+	 * is going to be written
+	 */
+	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+	if (ret_val) {
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
+		bank = 0;
+	}
+
+	if (bank == 0) {
+		new_bank_offset = nvm->flash_bank_size;
+		old_bank_offset = 0;
+		ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
+		if (ret_val)
+			goto release;
+	} else {
+		old_bank_offset = nvm->flash_bank_size;
+		new_bank_offset = 0;
+		ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
+		if (ret_val)
+			goto release;
+	}
+	for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
+		if (dev_spec->shadow_ram[i].modified) {
+			data = dev_spec->shadow_ram[i].value;
+		} else {
+			ret_val = e1000_read_flash_word_ich8lan(hw, i +
+								old_bank_offset,
+								&data);
+			if (ret_val)
+				break;
+		}
+
+		/* If the word is 0x13, then make sure the signature bits
+		 * (15:14) are 11b until the commit has completed.
+		 * This will allow us to write 10b which indicates the
+		 * signature is valid.  We want to do this after the write
+		 * has completed so that we don't mark the segment valid
+		 * while the write is still in progress
+		 */
+		if (i == E1000_ICH_NVM_SIG_WORD)
+			data |= E1000_ICH_NVM_SIG_MASK;
+
+		/* Convert offset to bytes. */
+		act_offset = (i + new_bank_offset) << 1;
+
+		usleep_range(100, 200);
+		/* Write the bytes to the new bank. */
+		ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
+							       act_offset,
+							       (u8)data);
+		if (ret_val)
+			break;
+
+		usleep_range(100, 200);
+		ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
+							       act_offset + 1,
+							       (u8)(data >> 8));
+		if (ret_val)
+			break;
+	}
+
+	/* Don't bother writing the segment valid bits if sector
+	 * programming failed.
+	 */
+	if (ret_val) {
+		/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
+		e_dbg("Flash commit failed.\n");
+		goto release;
+	}
+
+	/* Finally validate the new segment by setting bit 15:14
+	 * to 10b in word 0x13 , this can be done without an
+	 * erase as well since these bits are 11 to start with
+	 * and we need to change bit 14 to 0b
+	 */
+	act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
+	ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
+	if (ret_val)
+		goto release;
+
+	data &= 0xBFFF;
+	ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
+						       act_offset * 2 + 1,
+						       (u8)(data >> 8));
+	if (ret_val)
+		goto release;
+
+	/* And invalidate the previously valid segment by setting
+	 * its signature word (0x13) high_byte to 0b. This can be
+	 * done without an erase because flash erase sets all bits
+	 * to 1's. We can write 1's to 0's without an erase
+	 */
+	act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
+	ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
+	if (ret_val)
+		goto release;
+
+	/* Great!  Everything worked, we can now clear the cached entries. */
+	for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
+		dev_spec->shadow_ram[i].modified = false;
+		dev_spec->shadow_ram[i].value = 0xFFFF;
+	}
+
+release:
+	nvm->ops.release(hw);
+
+	/* Reload the EEPROM, or else modifications will not appear
+	 * until after the next adapter reset.
+	 */
+	if (!ret_val) {
+		nvm->ops.reload(hw);
+		usleep_range(10000, 20000);
+	}
+
+out:
+	if (ret_val)
+		e_dbg("NVM update error: %d\n", ret_val);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_validate_nvm_checksum_ich8lan - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Check to see if checksum needs to be fixed by reading bit 6 in word 0x19.
+ *  If the bit is 0, that the EEPROM had been modified, but the checksum was not
+ *  calculated, in which case we need to calculate the checksum and set bit 6.
+ **/
+static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 data;
+	u16 word;
+	u16 valid_csum_mask;
+
+	/* Read NVM and check Invalid Image CSUM bit.  If this bit is 0,
+	 * the checksum needs to be fixed.  This bit is an indication that
+	 * the NVM was prepared by OEM software and did not calculate
+	 * the checksum...a likely scenario.
+	 */
+	switch (hw->mac.type) {
+	case e1000_pch_lpt:
+	case e1000_pch_spt:
+		word = NVM_COMPAT;
+		valid_csum_mask = NVM_COMPAT_VALID_CSUM;
+		break;
+	default:
+		word = NVM_FUTURE_INIT_WORD1;
+		valid_csum_mask = NVM_FUTURE_INIT_WORD1_VALID_CSUM;
+		break;
+	}
+
+	ret_val = e1000_read_nvm(hw, word, 1, &data);
+	if (ret_val)
+		return ret_val;
+
+	if (!(data & valid_csum_mask)) {
+		data |= valid_csum_mask;
+		ret_val = e1000_write_nvm(hw, word, 1, &data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000e_update_nvm_checksum(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return e1000e_validate_nvm_checksum_generic(hw);
+}
+
+/**
+ *  e1000e_write_protect_nvm_ich8lan - Make the NVM read-only
+ *  @hw: pointer to the HW structure
+ *
+ *  To prevent malicious write/erase of the NVM, set it to be read-only
+ *  so that the hardware ignores all write/erase cycles of the NVM via
+ *  the flash control registers.  The shadow-ram copy of the NVM will
+ *  still be updated, however any updates to this copy will not stick
+ *  across driver reloads.
+ **/
+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	union ich8_flash_protected_range pr0;
+	union ich8_hws_flash_status hsfsts;
+	u32 gfpreg;
+
+	nvm->ops.acquire(hw);
+
+	gfpreg = er32flash(ICH_FLASH_GFPREG);
+
+	/* Write-protect GbE Sector of NVM */
+	pr0.regval = er32flash(ICH_FLASH_PR0);
+	pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK;
+	pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK);
+	pr0.range.wpe = true;
+	ew32flash(ICH_FLASH_PR0, pr0.regval);
+
+	/* Lock down a subset of GbE Flash Control Registers, e.g.
+	 * PR0 to prevent the write-protection from being lifted.
+	 * Once FLOCKDN is set, the registers protected by it cannot
+	 * be written until FLOCKDN is cleared by a hardware reset.
+	 */
+	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+	hsfsts.hsf_status.flockdn = true;
+	ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+
+	nvm->ops.release(hw);
+}
+
+/**
+ *  e1000_write_flash_data_ich8lan - Writes bytes to the NVM
+ *  @hw: pointer to the HW structure
+ *  @offset: The offset (in bytes) of the byte/word to read.
+ *  @size: Size of data to read, 1=byte 2=word
+ *  @data: The byte(s) to write to the NVM.
+ *
+ *  Writes one/two bytes to the NVM using the flash access registers.
+ **/
+static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+					  u8 size, u16 data)
+{
+	union ich8_hws_flash_status hsfsts;
+	union ich8_hws_flash_ctrl hsflctl;
+	u32 flash_linear_addr;
+	u32 flash_data = 0;
+	s32 ret_val;
+	u8 count = 0;
+
+	if (hw->mac.type == e1000_pch_spt) {
+		if (size != 4 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
+			return -E1000_ERR_NVM;
+	} else {
+		if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
+			return -E1000_ERR_NVM;
+	}
+
+	flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) +
+			     hw->nvm.flash_base_addr);
+
+	do {
+		udelay(1);
+		/* Steps */
+		ret_val = e1000_flash_cycle_init_ich8lan(hw);
+		if (ret_val)
+			break;
+		/* In SPT, This register is in Lan memory space, not
+		 * flash.  Therefore, only 32 bit access is supported
+		 */
+		if (hw->mac.type == e1000_pch_spt)
+			hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16;
+		else
+			hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+
+		/* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+		hsflctl.hsf_ctrl.fldbcount = size - 1;
+		hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
+		/* In SPT, This register is in Lan memory space,
+		 * not flash.  Therefore, only 32 bit access is
+		 * supported
+		 */
+		if (hw->mac.type == e1000_pch_spt)
+			ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16);
+		else
+			ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+
+		ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+
+		if (size == 1)
+			flash_data = (u32)data & 0x00FF;
+		else
+			flash_data = (u32)data;
+
+		ew32flash(ICH_FLASH_FDATA0, flash_data);
+
+		/* check if FCERR is set to 1 , if set to 1, clear it
+		 * and try the whole sequence a few more times else done
+		 */
+		ret_val =
+		    e1000_flash_cycle_ich8lan(hw,
+					      ICH_FLASH_WRITE_COMMAND_TIMEOUT);
+		if (!ret_val)
+			break;
+
+		/* If we're here, then things are most likely
+		 * completely hosed, but if the error condition
+		 * is detected, it won't hurt to give it another
+		 * try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
+		 */
+		hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+		if (hsfsts.hsf_status.flcerr)
+			/* Repeat for some time before giving up. */
+			continue;
+		if (!hsfsts.hsf_status.flcdone) {
+			e_dbg("Timeout error - flash cycle did not complete.\n");
+			break;
+		}
+	} while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+
+	return ret_val;
+}
+
+/**
+*  e1000_write_flash_data32_ich8lan - Writes 4 bytes to the NVM
+*  @hw: pointer to the HW structure
+*  @offset: The offset (in bytes) of the dwords to read.
+*  @data: The 4 bytes to write to the NVM.
+*
+*  Writes one/two/four bytes to the NVM using the flash access registers.
+**/
+static s32 e1000_write_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset,
+					    u32 data)
+{
+	union ich8_hws_flash_status hsfsts;
+	union ich8_hws_flash_ctrl hsflctl;
+	u32 flash_linear_addr;
+	s32 ret_val;
+	u8 count = 0;
+
+	if (hw->mac.type == e1000_pch_spt) {
+		if (offset > ICH_FLASH_LINEAR_ADDR_MASK)
+			return -E1000_ERR_NVM;
+	}
+	flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) +
+			     hw->nvm.flash_base_addr);
+	do {
+		udelay(1);
+		/* Steps */
+		ret_val = e1000_flash_cycle_init_ich8lan(hw);
+		if (ret_val)
+			break;
+
+		/* In SPT, This register is in Lan memory space, not
+		 * flash.  Therefore, only 32 bit access is supported
+		 */
+		if (hw->mac.type == e1000_pch_spt)
+			hsflctl.regval = er32flash(ICH_FLASH_HSFSTS)
+			    >> 16;
+		else
+			hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+
+		hsflctl.hsf_ctrl.fldbcount = sizeof(u32) - 1;
+		hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
+
+		/* In SPT, This register is in Lan memory space,
+		 * not flash.  Therefore, only 32 bit access is
+		 * supported
+		 */
+		if (hw->mac.type == e1000_pch_spt)
+			ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16);
+		else
+			ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+
+		ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+
+		ew32flash(ICH_FLASH_FDATA0, data);
+
+		/* check if FCERR is set to 1 , if set to 1, clear it
+		 * and try the whole sequence a few more times else done
+		 */
+		ret_val =
+		   e1000_flash_cycle_ich8lan(hw,
+					     ICH_FLASH_WRITE_COMMAND_TIMEOUT);
+
+		if (!ret_val)
+			break;
+
+		/* If we're here, then things are most likely
+		 * completely hosed, but if the error condition
+		 * is detected, it won't hurt to give it another
+		 * try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
+		 */
+		hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+
+		if (hsfsts.hsf_status.flcerr)
+			/* Repeat for some time before giving up. */
+			continue;
+		if (!hsfsts.hsf_status.flcdone) {
+			e_dbg("Timeout error - flash cycle did not complete.\n");
+			break;
+		}
+	} while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_flash_byte_ich8lan - Write a single byte to NVM
+ *  @hw: pointer to the HW structure
+ *  @offset: The index of the byte to read.
+ *  @data: The byte to write to the NVM.
+ *
+ *  Writes a single byte to the NVM using the flash access registers.
+ **/
+static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+					  u8 data)
+{
+	u16 word = (u16)data;
+
+	return e1000_write_flash_data_ich8lan(hw, offset, 1, word);
+}
+
+/**
+*  e1000_retry_write_flash_dword_ich8lan - Writes a dword to NVM
+*  @hw: pointer to the HW structure
+*  @offset: The offset of the word to write.
+*  @dword: The dword to write to the NVM.
+*
+*  Writes a single dword to the NVM using the flash access registers.
+*  Goes through a retry algorithm before giving up.
+**/
+static s32 e1000_retry_write_flash_dword_ich8lan(struct e1000_hw *hw,
+						 u32 offset, u32 dword)
+{
+	s32 ret_val;
+	u16 program_retries;
+
+	/* Must convert word offset into bytes. */
+	offset <<= 1;
+	ret_val = e1000_write_flash_data32_ich8lan(hw, offset, dword);
+
+	if (!ret_val)
+		return ret_val;
+	for (program_retries = 0; program_retries < 100; program_retries++) {
+		e_dbg("Retrying Byte %8.8X at offset %u\n", dword, offset);
+		usleep_range(100, 200);
+		ret_val = e1000_write_flash_data32_ich8lan(hw, offset, dword);
+		if (!ret_val)
+			break;
+	}
+	if (program_retries == 100)
+		return -E1000_ERR_NVM;
+
+	return 0;
+}
+
+/**
+ *  e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM
+ *  @hw: pointer to the HW structure
+ *  @offset: The offset of the byte to write.
+ *  @byte: The byte to write to the NVM.
+ *
+ *  Writes a single byte to the NVM using the flash access registers.
+ *  Goes through a retry algorithm before giving up.
+ **/
+static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
+						u32 offset, u8 byte)
+{
+	s32 ret_val;
+	u16 program_retries;
+
+	ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
+	if (!ret_val)
+		return ret_val;
+
+	for (program_retries = 0; program_retries < 100; program_retries++) {
+		e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
+		usleep_range(100, 200);
+		ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
+		if (!ret_val)
+			break;
+	}
+	if (program_retries == 100)
+		return -E1000_ERR_NVM;
+
+	return 0;
+}
+
+/**
+ *  e1000_erase_flash_bank_ich8lan - Erase a bank (4k) from NVM
+ *  @hw: pointer to the HW structure
+ *  @bank: 0 for first bank, 1 for second bank, etc.
+ *
+ *  Erases the bank specified. Each bank is a 4k block. Banks are 0 based.
+ *  bank N is 4096 * N + flash_reg_addr.
+ **/
+static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	union ich8_hws_flash_status hsfsts;
+	union ich8_hws_flash_ctrl hsflctl;
+	u32 flash_linear_addr;
+	/* bank size is in 16bit words - adjust to bytes */
+	u32 flash_bank_size = nvm->flash_bank_size * 2;
+	s32 ret_val;
+	s32 count = 0;
+	s32 j, iteration, sector_size;
+
+	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+
+	/* Determine HW Sector size: Read BERASE bits of hw flash status
+	 * register
+	 * 00: The Hw sector is 256 bytes, hence we need to erase 16
+	 *     consecutive sectors.  The start index for the nth Hw sector
+	 *     can be calculated as = bank * 4096 + n * 256
+	 * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
+	 *     The start index for the nth Hw sector can be calculated
+	 *     as = bank * 4096
+	 * 10: The Hw sector is 8K bytes, nth sector = bank * 8192
+	 *     (ich9 only, otherwise error condition)
+	 * 11: The Hw sector is 64K bytes, nth sector = bank * 65536
+	 */
+	switch (hsfsts.hsf_status.berasesz) {
+	case 0:
+		/* Hw sector size 256 */
+		sector_size = ICH_FLASH_SEG_SIZE_256;
+		iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_256;
+		break;
+	case 1:
+		sector_size = ICH_FLASH_SEG_SIZE_4K;
+		iteration = 1;
+		break;
+	case 2:
+		sector_size = ICH_FLASH_SEG_SIZE_8K;
+		iteration = 1;
+		break;
+	case 3:
+		sector_size = ICH_FLASH_SEG_SIZE_64K;
+		iteration = 1;
+		break;
+	default:
+		return -E1000_ERR_NVM;
+	}
+
+	/* Start with the base address, then add the sector offset. */
+	flash_linear_addr = hw->nvm.flash_base_addr;
+	flash_linear_addr += (bank) ? flash_bank_size : 0;
+
+	for (j = 0; j < iteration; j++) {
+		do {
+			u32 timeout = ICH_FLASH_ERASE_COMMAND_TIMEOUT;
+
+			/* Steps */
+			ret_val = e1000_flash_cycle_init_ich8lan(hw);
+			if (ret_val)
+				return ret_val;
+
+			/* Write a value 11 (block Erase) in Flash
+			 * Cycle field in hw flash control
+			 */
+			if (hw->mac.type == e1000_pch_spt)
+				hsflctl.regval =
+				    er32flash(ICH_FLASH_HSFSTS) >> 16;
+			else
+				hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+
+			hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
+			if (hw->mac.type == e1000_pch_spt)
+				ew32flash(ICH_FLASH_HSFSTS,
+					  hsflctl.regval << 16);
+			else
+				ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+
+			/* Write the last 24 bits of an index within the
+			 * block into Flash Linear address field in Flash
+			 * Address.
+			 */
+			flash_linear_addr += (j * sector_size);
+			ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+
+			ret_val = e1000_flash_cycle_ich8lan(hw, timeout);
+			if (!ret_val)
+				break;
+
+			/* Check if FCERR is set to 1.  If 1,
+			 * clear it and try the whole sequence
+			 * a few more times else Done
+			 */
+			hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+			if (hsfsts.hsf_status.flcerr)
+				/* repeat for some time before giving up */
+				continue;
+			else if (!hsfsts.hsf_status.flcdone)
+				return ret_val;
+		} while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT);
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_valid_led_default_ich8lan - Set the default LED settings
+ *  @hw: pointer to the HW structure
+ *  @data: Pointer to the LED settings
+ *
+ *  Reads the LED default settings from the NVM to data.  If the NVM LED
+ *  settings is all 0's or F's, set the LED default to a valid LED default
+ *  setting.
+ **/
+static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
+{
+	s32 ret_val;
+
+	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
+		*data = ID_LED_DEFAULT_ICH8LAN;
+
+	return 0;
+}
+
+/**
+ *  e1000_id_led_init_pchlan - store LED configurations
+ *  @hw: pointer to the HW structure
+ *
+ *  PCH does not control LEDs via the LEDCTL register, rather it uses
+ *  the PHY LED configuration register.
+ *
+ *  PCH also does not have an "always on" or "always off" mode which
+ *  complicates the ID feature.  Instead of using the "on" mode to indicate
+ *  in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init_generic()),
+ *  use "link_up" mode.  The LEDs will still ID on request if there is no
+ *  link based on logic in e1000_led_[on|off]_pchlan().
+ **/
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	const u32 ledctl_on = E1000_LEDCTL_MODE_LINK_UP;
+	const u32 ledctl_off = E1000_LEDCTL_MODE_LINK_UP | E1000_PHY_LED0_IVRT;
+	u16 data, i, temp, shift;
+
+	/* Get default ID LED modes */
+	ret_val = hw->nvm.ops.valid_led_default(hw, &data);
+	if (ret_val)
+		return ret_val;
+
+	mac->ledctl_default = er32(LEDCTL);
+	mac->ledctl_mode1 = mac->ledctl_default;
+	mac->ledctl_mode2 = mac->ledctl_default;
+
+	for (i = 0; i < 4; i++) {
+		temp = (data >> (i << 2)) & E1000_LEDCTL_LED0_MODE_MASK;
+		shift = (i * 5);
+		switch (temp) {
+		case ID_LED_ON1_DEF2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_ON1_OFF2:
+			mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode1 |= (ledctl_on << shift);
+			break;
+		case ID_LED_OFF1_DEF2:
+		case ID_LED_OFF1_ON2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode1 |= (ledctl_off << shift);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+		switch (temp) {
+		case ID_LED_DEF1_ON2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_OFF1_ON2:
+			mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode2 |= (ledctl_on << shift);
+			break;
+		case ID_LED_DEF1_OFF2:
+		case ID_LED_ON1_OFF2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode2 |= (ledctl_off << shift);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_get_bus_info_ich8lan - Get/Set the bus type and width
+ *  @hw: pointer to the HW structure
+ *
+ *  ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
+ *  register, so the the bus width is hard coded.
+ **/
+static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_bus_info *bus = &hw->bus;
+	s32 ret_val;
+
+	ret_val = e1000e_get_bus_info_pcie(hw);
+
+	/* ICH devices are "PCI Express"-ish.  They have
+	 * a configuration space, but do not contain
+	 * PCI Express Capability registers, so bus width
+	 * must be hardcoded.
+	 */
+	if (bus->width == e1000_bus_width_unknown)
+		bus->width = e1000_bus_width_pcie_x1;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_reset_hw_ich8lan - Reset the hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  Does a full reset of the hardware which includes a reset of the PHY and
+ *  MAC.
+ **/
+static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u16 kum_cfg;
+	u32 ctrl, reg;
+	s32 ret_val;
+
+	/* Prevent the PCI-E bus from sticking if there is no TLP connection
+	 * on the last TLP read/write transaction when MAC is reset.
+	 */
+	ret_val = e1000e_disable_pcie_master(hw);
+	if (ret_val)
+		e_dbg("PCI-E Master disable polling has failed.\n");
+
+	e_dbg("Masking off all interrupts\n");
+	ew32(IMC, 0xffffffff);
+
+	/* Disable the Transmit and Receive units.  Then delay to allow
+	 * any pending transactions to complete before we hit the MAC
+	 * with the global reset.
+	 */
+	ew32(RCTL, 0);
+	ew32(TCTL, E1000_TCTL_PSP);
+	e1e_flush();
+
+	usleep_range(10000, 20000);
+
+	/* Workaround for ICH8 bit corruption issue in FIFO memory */
+	if (hw->mac.type == e1000_ich8lan) {
+		/* Set Tx and Rx buffer allocation to 8k apiece. */
+		ew32(PBA, E1000_PBA_8K);
+		/* Set Packet Buffer Size to 16k. */
+		ew32(PBS, E1000_PBS_16K);
+	}
+
+	if (hw->mac.type == e1000_pchlan) {
+		/* Save the NVM K1 bit setting */
+		ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, &kum_cfg);
+		if (ret_val)
+			return ret_val;
+
+		if (kum_cfg & E1000_NVM_K1_ENABLE)
+			dev_spec->nvm_k1_enabled = true;
+		else
+			dev_spec->nvm_k1_enabled = false;
+	}
+
+	ctrl = er32(CTRL);
+
+	if (!hw->phy.ops.check_reset_block(hw)) {
+		/* Full-chip reset requires MAC and PHY reset at the same
+		 * time to make sure the interface between MAC and the
+		 * external PHY is reset.
+		 */
+		ctrl |= E1000_CTRL_PHY_RST;
+
+		/* Gate automatic PHY configuration by hardware on
+		 * non-managed 82579
+		 */
+		if ((hw->mac.type == e1000_pch2lan) &&
+		    !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+			e1000_gate_hw_phy_config_ich8lan(hw, true);
+	}
+	ret_val = e1000_acquire_swflag_ich8lan(hw);
+	e_dbg("Issuing a global reset to ich8lan\n");
+	ew32(CTRL, (ctrl | E1000_CTRL_RST));
+	/* cannot issue a flush here because it hangs the hardware */
+	msleep(20);
+
+	/* Set Phy Config Counter to 50msec */
+	if (hw->mac.type == e1000_pch2lan) {
+		reg = er32(FEXTNVM3);
+		reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+		reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+		ew32(FEXTNVM3, reg);
+	}
+
+	if (!ret_val)
+		clear_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state);
+
+	if (ctrl & E1000_CTRL_PHY_RST) {
+		ret_val = hw->phy.ops.get_cfg_done(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = e1000_post_phy_reset_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* For PCH, this write will make sure that any noise
+	 * will be detected as a CRC error and be dropped rather than show up
+	 * as a bad packet to the DMA engine.
+	 */
+	if (hw->mac.type == e1000_pchlan)
+		ew32(CRC_OFFSET, 0x65656565);
+
+	ew32(IMC, 0xffffffff);
+	er32(ICR);
+
+	reg = er32(KABGTXD);
+	reg |= E1000_KABGTXD_BGSQLBIAS;
+	ew32(KABGTXD, reg);
+
+	return 0;
+}
+
+/**
+ *  e1000_init_hw_ich8lan - Initialize the hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  Prepares the hardware for transmit and receive by doing the following:
+ *   - initialize hardware bits
+ *   - initialize LED identification
+ *   - setup receive address registers
+ *   - setup flow control
+ *   - setup transmit descriptors
+ *   - clear statistics
+ **/
+static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 ctrl_ext, txdctl, snoop;
+	s32 ret_val;
+	u16 i;
+
+	e1000_initialize_hw_bits_ich8lan(hw);
+
+	/* Initialize identification LED */
+	ret_val = mac->ops.id_led_init(hw);
+	/* An error is not fatal and we should not stop init due to this */
+	if (ret_val)
+		e_dbg("Error initializing identification LED\n");
+
+	/* Setup the receive address. */
+	e1000e_init_rx_addrs(hw, mac->rar_entry_count);
+
+	/* Zero out the Multicast HASH table */
+	e_dbg("Zeroing the MTA\n");
+	for (i = 0; i < mac->mta_reg_count; i++)
+		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+	/* The 82578 Rx buffer will stall if wakeup is enabled in host and
+	 * the ME.  Disable wakeup by clearing the host wakeup bit.
+	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
+	 */
+	if (hw->phy.type == e1000_phy_82578) {
+		e1e_rphy(hw, BM_PORT_GEN_CFG, &i);
+		i &= ~BM_WUC_HOST_WU_BIT;
+		e1e_wphy(hw, BM_PORT_GEN_CFG, i);
+		ret_val = e1000_phy_hw_reset_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Setup link and flow control */
+	ret_val = mac->ops.setup_link(hw);
+
+	/* Set the transmit descriptor write-back policy for both queues */
+	txdctl = er32(TXDCTL(0));
+	txdctl = ((txdctl & ~E1000_TXDCTL_WTHRESH) |
+		  E1000_TXDCTL_FULL_TX_DESC_WB);
+	txdctl = ((txdctl & ~E1000_TXDCTL_PTHRESH) |
+		  E1000_TXDCTL_MAX_TX_DESC_PREFETCH);
+	ew32(TXDCTL(0), txdctl);
+	txdctl = er32(TXDCTL(1));
+	txdctl = ((txdctl & ~E1000_TXDCTL_WTHRESH) |
+		  E1000_TXDCTL_FULL_TX_DESC_WB);
+	txdctl = ((txdctl & ~E1000_TXDCTL_PTHRESH) |
+		  E1000_TXDCTL_MAX_TX_DESC_PREFETCH);
+	ew32(TXDCTL(1), txdctl);
+
+	/* ICH8 has opposite polarity of no_snoop bits.
+	 * By default, we should use snoop behavior.
+	 */
+	if (mac->type == e1000_ich8lan)
+		snoop = PCIE_ICH8_SNOOP_ALL;
+	else
+		snoop = (u32)~(PCIE_NO_SNOOP_ALL);
+	e1000e_set_pcie_no_snoop(hw, snoop);
+
+	ctrl_ext = er32(CTRL_EXT);
+	ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+	ew32(CTRL_EXT, ctrl_ext);
+
+	/* Clear all of the statistics registers (clear on read).  It is
+	 * important that we do this after we have tried to establish link
+	 * because the symbol error count will increment wildly if there
+	 * is no link.
+	 */
+	e1000_clear_hw_cntrs_ich8lan(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_initialize_hw_bits_ich8lan - Initialize required hardware bits
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets/Clears required hardware bits necessary for correctly setting up the
+ *  hardware for transmit and receive.
+ **/
+static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
+{
+	u32 reg;
+
+	/* Extended Device Control */
+	reg = er32(CTRL_EXT);
+	reg |= (1 << 22);
+	/* Enable PHY low-power state when MAC is at D3 w/o WoL */
+	if (hw->mac.type >= e1000_pchlan)
+		reg |= E1000_CTRL_EXT_PHYPDEN;
+	ew32(CTRL_EXT, reg);
+
+	/* Transmit Descriptor Control 0 */
+	reg = er32(TXDCTL(0));
+	reg |= (1 << 22);
+	ew32(TXDCTL(0), reg);
+
+	/* Transmit Descriptor Control 1 */
+	reg = er32(TXDCTL(1));
+	reg |= (1 << 22);
+	ew32(TXDCTL(1), reg);
+
+	/* Transmit Arbitration Control 0 */
+	reg = er32(TARC(0));
+	if (hw->mac.type == e1000_ich8lan)
+		reg |= (1 << 28) | (1 << 29);
+	reg |= (1 << 23) | (1 << 24) | (1 << 26) | (1 << 27);
+	ew32(TARC(0), reg);
+
+	/* Transmit Arbitration Control 1 */
+	reg = er32(TARC(1));
+	if (er32(TCTL) & E1000_TCTL_MULR)
+		reg &= ~(1 << 28);
+	else
+		reg |= (1 << 28);
+	reg |= (1 << 24) | (1 << 26) | (1 << 30);
+	ew32(TARC(1), reg);
+
+	/* Device Status */
+	if (hw->mac.type == e1000_ich8lan) {
+		reg = er32(STATUS);
+		reg &= ~(1 << 31);
+		ew32(STATUS, reg);
+	}
+
+	/* work-around descriptor data corruption issue during nfs v2 udp
+	 * traffic, just disable the nfs filtering capability
+	 */
+	reg = er32(RFCTL);
+	reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);
+
+	/* Disable IPv6 extension header parsing because some malformed
+	 * IPv6 headers can hang the Rx.
+	 */
+	if (hw->mac.type == e1000_ich8lan)
+		reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
+	ew32(RFCTL, reg);
+
+	/* Enable ECC on Lynxpoint */
+	if ((hw->mac.type == e1000_pch_lpt) ||
+	    (hw->mac.type == e1000_pch_spt)) {
+		reg = er32(PBECCSTS);
+		reg |= E1000_PBECCSTS_ECC_ENABLE;
+		ew32(PBECCSTS, reg);
+
+		reg = er32(CTRL);
+		reg |= E1000_CTRL_MEHE;
+		ew32(CTRL, reg);
+	}
+}
+
+/**
+ *  e1000_setup_link_ich8lan - Setup flow control and link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines which flow control settings to use, then configures flow
+ *  control.  Calls the appropriate media-specific link configuration
+ *  function.  Assuming the adapter has a valid link partner, a valid link
+ *  should be established.  Assumes the hardware has previously been reset
+ *  and the transmitter and receiver are not enabled.
+ **/
+static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	if (hw->phy.ops.check_reset_block(hw))
+		return 0;
+
+	/* ICH parts do not have a word in the NVM to determine
+	 * the default flow control setting, so we explicitly
+	 * set it to full.
+	 */
+	if (hw->fc.requested_mode == e1000_fc_default) {
+		/* Workaround h/w hang when Tx flow control enabled */
+		if (hw->mac.type == e1000_pchlan)
+			hw->fc.requested_mode = e1000_fc_rx_pause;
+		else
+			hw->fc.requested_mode = e1000_fc_full;
+	}
+
+	/* Save off the requested flow control mode for use later.  Depending
+	 * on the link partner's capabilities, we may or may not use this mode.
+	 */
+	hw->fc.current_mode = hw->fc.requested_mode;
+
+	e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
+
+	/* Continue to configure the copper link. */
+	ret_val = hw->mac.ops.setup_physical_interface(hw);
+	if (ret_val)
+		return ret_val;
+
+	ew32(FCTTV, hw->fc.pause_time);
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82579) ||
+	    (hw->phy.type == e1000_phy_i217) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		ew32(FCRTV_PCH, hw->fc.refresh_time);
+
+		ret_val = e1e_wphy(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27),
+				   hw->fc.pause_time);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return e1000e_set_fc_watermarks(hw);
+}
+
+/**
+ *  e1000_setup_copper_link_ich8lan - Configure MAC/PHY interface
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the kumeran interface to the PHY to wait the appropriate time
+ *  when polling the PHY, then call the generic setup_copper_link to finish
+ *  configuring the copper link.
+ **/
+static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+	u16 reg_data;
+
+	ctrl = er32(CTRL);
+	ctrl |= E1000_CTRL_SLU;
+	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	ew32(CTRL, ctrl);
+
+	/* Set the mac to wait the maximum time between each iteration
+	 * and increase the max iterations when polling the phy;
+	 * this fixes erroneous timeouts at 10Mbps.
+	 */
+	ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_TIMEOUTS, 0xFFFF);
+	if (ret_val)
+		return ret_val;
+	ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+				       &reg_data);
+	if (ret_val)
+		return ret_val;
+	reg_data |= 0x3F;
+	ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+					reg_data);
+	if (ret_val)
+		return ret_val;
+
+	switch (hw->phy.type) {
+	case e1000_phy_igp_3:
+		ret_val = e1000e_copper_link_setup_igp(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	case e1000_phy_bm:
+	case e1000_phy_82578:
+		ret_val = e1000e_copper_link_setup_m88(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	case e1000_phy_82577:
+	case e1000_phy_82579:
+		ret_val = e1000_copper_link_setup_82577(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	case e1000_phy_ife:
+		ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &reg_data);
+		if (ret_val)
+			return ret_val;
+
+		reg_data &= ~IFE_PMC_AUTO_MDIX;
+
+		switch (hw->phy.mdix) {
+		case 1:
+			reg_data &= ~IFE_PMC_FORCE_MDIX;
+			break;
+		case 2:
+			reg_data |= IFE_PMC_FORCE_MDIX;
+			break;
+		case 0:
+		default:
+			reg_data |= IFE_PMC_AUTO_MDIX;
+			break;
+		}
+		ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
+		if (ret_val)
+			return ret_val;
+		break;
+	default:
+		break;
+	}
+
+	return e1000e_setup_copper_link(hw);
+}
+
+/**
+ *  e1000_setup_copper_link_pch_lpt - Configure MAC/PHY interface
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY specific link setup function and then calls the
+ *  generic setup_copper_link to finish configuring the link for
+ *  Lynxpoint PCH devices
+ **/
+static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+
+	ctrl = er32(CTRL);
+	ctrl |= E1000_CTRL_SLU;
+	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	ew32(CTRL, ctrl);
+
+	ret_val = e1000_copper_link_setup_82577(hw);
+	if (ret_val)
+		return ret_val;
+
+	return e1000e_setup_copper_link(hw);
+}
+
+/**
+ *  e1000_get_link_up_info_ich8lan - Get current link speed and duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: pointer to store current link speed
+ *  @duplex: pointer to store the current link duplex
+ *
+ *  Calls the generic get_speed_and_duplex to retrieve the current link
+ *  information and then calls the Kumeran lock loss workaround for links at
+ *  gigabit speeds.
+ **/
+static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
+					  u16 *duplex)
+{
+	s32 ret_val;
+
+	ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex);
+	if (ret_val)
+		return ret_val;
+
+	if ((hw->mac.type == e1000_ich8lan) &&
+	    (hw->phy.type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
+		ret_val = e1000_kmrn_lock_loss_workaround_ich8lan(hw);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_kmrn_lock_loss_workaround_ich8lan - Kumeran workaround
+ *  @hw: pointer to the HW structure
+ *
+ *  Work-around for 82566 Kumeran PCS lock loss:
+ *  On link status change (i.e. PCI reset, speed change) and link is up and
+ *  speed is gigabit-
+ *    0) if workaround is optionally disabled do nothing
+ *    1) wait 1ms for Kumeran link to come up
+ *    2) check Kumeran Diagnostic register PCS lock loss bit
+ *    3) if not set the link is locked (all is good), otherwise...
+ *    4) reset the PHY
+ *    5) repeat up to 10 times
+ *  Note: this is only called for IGP3 copper when speed is 1gb.
+ **/
+static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 phy_ctrl;
+	s32 ret_val;
+	u16 i, data;
+	bool link;
+
+	if (!dev_spec->kmrn_lock_loss_workaround_enabled)
+		return 0;
+
+	/* Make sure link is up before proceeding.  If not just return.
+	 * Attempting this while link is negotiating fouled up link
+	 * stability
+	 */
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (!link)
+		return 0;
+
+	for (i = 0; i < 10; i++) {
+		/* read once to clear */
+		ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
+		if (ret_val)
+			return ret_val;
+		/* and again to get new status */
+		ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
+		if (ret_val)
+			return ret_val;
+
+		/* check for PCS lock */
+		if (!(data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
+			return 0;
+
+		/* Issue PHY reset */
+		e1000_phy_hw_reset(hw);
+		mdelay(5);
+	}
+	/* Disable GigE link negotiation */
+	phy_ctrl = er32(PHY_CTRL);
+	phy_ctrl |= (E1000_PHY_CTRL_GBE_DISABLE |
+		     E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+	ew32(PHY_CTRL, phy_ctrl);
+
+	/* Call gig speed drop workaround on Gig disable before accessing
+	 * any PHY registers
+	 */
+	e1000e_gig_downshift_workaround_ich8lan(hw);
+
+	/* unable to acquire PCS lock */
+	return -E1000_ERR_PHY;
+}
+
+/**
+ *  e1000e_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
+ *  @hw: pointer to the HW structure
+ *  @state: boolean value used to set the current Kumeran workaround state
+ *
+ *  If ICH8, set the current Kumeran workaround state (enabled - true
+ *  /disabled - false).
+ **/
+void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+						  bool state)
+{
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+
+	if (hw->mac.type != e1000_ich8lan) {
+		e_dbg("Workaround applies to ICH8 only.\n");
+		return;
+	}
+
+	dev_spec->kmrn_lock_loss_workaround_enabled = state;
+}
+
+/**
+ *  e1000_ipg3_phy_powerdown_workaround_ich8lan - Power down workaround on D3
+ *  @hw: pointer to the HW structure
+ *
+ *  Workaround for 82566 power-down on D3 entry:
+ *    1) disable gigabit link
+ *    2) write VR power-down enable
+ *    3) read it back
+ *  Continue if successful, else issue LCD reset and repeat
+ **/
+void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
+{
+	u32 reg;
+	u16 data;
+	u8 retry = 0;
+
+	if (hw->phy.type != e1000_phy_igp_3)
+		return;
+
+	/* Try the workaround twice (if needed) */
+	do {
+		/* Disable link */
+		reg = er32(PHY_CTRL);
+		reg |= (E1000_PHY_CTRL_GBE_DISABLE |
+			E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+		ew32(PHY_CTRL, reg);
+
+		/* Call gig speed drop workaround on Gig disable before
+		 * accessing any PHY registers
+		 */
+		if (hw->mac.type == e1000_ich8lan)
+			e1000e_gig_downshift_workaround_ich8lan(hw);
+
+		/* Write VR power-down enable */
+		e1e_rphy(hw, IGP3_VR_CTRL, &data);
+		data &= ~IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
+		e1e_wphy(hw, IGP3_VR_CTRL, data | IGP3_VR_CTRL_MODE_SHUTDOWN);
+
+		/* Read it back and test */
+		e1e_rphy(hw, IGP3_VR_CTRL, &data);
+		data &= IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
+		if ((data == IGP3_VR_CTRL_MODE_SHUTDOWN) || retry)
+			break;
+
+		/* Issue PHY reset and repeat at most one more time */
+		reg = er32(CTRL);
+		ew32(CTRL, reg | E1000_CTRL_PHY_RST);
+		retry++;
+	} while (retry);
+}
+
+/**
+ *  e1000e_gig_downshift_workaround_ich8lan - WoL from S5 stops working
+ *  @hw: pointer to the HW structure
+ *
+ *  Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC),
+ *  LPLU, Gig disable, MDIC PHY reset):
+ *    1) Set Kumeran Near-end loopback
+ *    2) Clear Kumeran Near-end loopback
+ *  Should only be called for ICH8[m] devices with any 1G Phy.
+ **/
+void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 reg_data;
+
+	if ((hw->mac.type != e1000_ich8lan) || (hw->phy.type == e1000_phy_ife))
+		return;
+
+	ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+				       &reg_data);
+	if (ret_val)
+		return;
+	reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK;
+	ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+					reg_data);
+	if (ret_val)
+		return;
+	reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK;
+	e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, reg_data);
+}
+
+/**
+ *  e1000_suspend_workarounds_ich8lan - workarounds needed during S0->Sx
+ *  @hw: pointer to the HW structure
+ *
+ *  During S0 to Sx transition, it is possible the link remains at gig
+ *  instead of negotiating to a lower speed.  Before going to Sx, set
+ *  'Gig Disable' to force link speed negotiation to a lower speed based on
+ *  the LPLU setting in the NVM or custom setting.  For PCH and newer parts,
+ *  the OEM bits PHY register (LED, GbE disable and LPLU configurations) also
+ *  needs to be written.
+ *  Parts that support (and are linked to a partner which support) EEE in
+ *  100Mbps should disable LPLU since 100Mbps w/ EEE requires less power
+ *  than 10Mbps w/o EEE.
+ **/
+void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 phy_ctrl;
+	s32 ret_val;
+
+	phy_ctrl = er32(PHY_CTRL);
+	phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE;
+
+	if (hw->phy.type == e1000_phy_i217) {
+		u16 phy_reg, device_id = hw->adapter->pdev->device;
+
+		if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+		    (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V) ||
+		    (device_id == E1000_DEV_ID_PCH_I218_LM3) ||
+		    (device_id == E1000_DEV_ID_PCH_I218_V3) ||
+		    (hw->mac.type == e1000_pch_spt)) {
+			u32 fextnvm6 = er32(FEXTNVM6);
+
+			ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+		}
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			goto out;
+
+		if (!dev_spec->eee_disable) {
+			u16 eee_advert;
+
+			ret_val =
+			    e1000_read_emi_reg_locked(hw,
+						      I217_EEE_ADVERTISEMENT,
+						      &eee_advert);
+			if (ret_val)
+				goto release;
+
+			/* Disable LPLU if both link partners support 100BaseT
+			 * EEE and 100Full is advertised on both ends of the
+			 * link, and enable Auto Enable LPI since there will
+			 * be no driver to enable LPI while in Sx.
+			 */
+			if ((eee_advert & I82579_EEE_100_SUPPORTED) &&
+			    (dev_spec->eee_lp_ability &
+			     I82579_EEE_100_SUPPORTED) &&
+			    (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) {
+				phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU |
+					      E1000_PHY_CTRL_NOND0A_LPLU);
+
+				/* Set Auto Enable LPI after link up */
+				e1e_rphy_locked(hw,
+						I217_LPI_GPIO_CTRL, &phy_reg);
+				phy_reg |= I217_LPI_GPIO_CTRL_AUTO_EN_LPI;
+				e1e_wphy_locked(hw,
+						I217_LPI_GPIO_CTRL, phy_reg);
+			}
+		}
+
+		/* For i217 Intel Rapid Start Technology support,
+		 * when the system is going into Sx and no manageability engine
+		 * is present, the driver must configure proxy to reset only on
+		 * power good.  LPI (Low Power Idle) state must also reset only
+		 * on power good, as well as the MTA (Multicast table array).
+		 * The SMBus release must also be disabled on LCD reset.
+		 */
+		if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+			/* Enable proxy to reset only on power good. */
+			e1e_rphy_locked(hw, I217_PROXY_CTRL, &phy_reg);
+			phy_reg |= I217_PROXY_CTRL_AUTO_DISABLE;
+			e1e_wphy_locked(hw, I217_PROXY_CTRL, phy_reg);
+
+			/* Set bit enable LPI (EEE) to reset only on
+			 * power good.
+			 */
+			e1e_rphy_locked(hw, I217_SxCTRL, &phy_reg);
+			phy_reg |= I217_SxCTRL_ENABLE_LPI_RESET;
+			e1e_wphy_locked(hw, I217_SxCTRL, phy_reg);
+
+			/* Disable the SMB release on LCD reset. */
+			e1e_rphy_locked(hw, I217_MEMPWR, &phy_reg);
+			phy_reg &= ~I217_MEMPWR_DISABLE_SMB_RELEASE;
+			e1e_wphy_locked(hw, I217_MEMPWR, phy_reg);
+		}
+
+		/* Enable MTA to reset for Intel Rapid Start Technology
+		 * Support
+		 */
+		e1e_rphy_locked(hw, I217_CGFREG, &phy_reg);
+		phy_reg |= I217_CGFREG_ENABLE_MTA_RESET;
+		e1e_wphy_locked(hw, I217_CGFREG, phy_reg);
+
+release:
+		hw->phy.ops.release(hw);
+	}
+out:
+	ew32(PHY_CTRL, phy_ctrl);
+
+	if (hw->mac.type == e1000_ich8lan)
+		e1000e_gig_downshift_workaround_ich8lan(hw);
+
+	if (hw->mac.type >= e1000_pchlan) {
+		e1000_oem_bits_config_ich8lan(hw, false);
+
+		/* Reset PHY to activate OEM bits on 82577/8 */
+		if (hw->mac.type == e1000_pchlan)
+			e1000e_phy_hw_reset_generic(hw);
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return;
+		e1000_write_smbus_addr(hw);
+		hw->phy.ops.release(hw);
+	}
+}
+
+/**
+ *  e1000_resume_workarounds_pchlan - workarounds needed during Sx->S0
+ *  @hw: pointer to the HW structure
+ *
+ *  During Sx to S0 transitions on non-managed devices or managed devices
+ *  on which PHY resets are not blocked, if the PHY registers cannot be
+ *  accessed properly by the s/w toggle the LANPHYPC value to power cycle
+ *  the PHY.
+ *  On i217, setup Intel Rapid Start Technology.
+ **/
+void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	if (hw->mac.type < e1000_pch2lan)
+		return;
+
+	ret_val = e1000_init_phy_workarounds_pchlan(hw);
+	if (ret_val) {
+		e_dbg("Failed to init PHY flow ret_val=%d\n", ret_val);
+		return;
+	}
+
+	/* For i217 Intel Rapid Start Technology support when the system
+	 * is transitioning from Sx and no manageability engine is present
+	 * configure SMBus to restore on reset, disable proxy, and enable
+	 * the reset on MTA (Multicast table array).
+	 */
+	if (hw->phy.type == e1000_phy_i217) {
+		u16 phy_reg;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val) {
+			e_dbg("Failed to setup iRST\n");
+			return;
+		}
+
+		/* Clear Auto Enable LPI after link up */
+		e1e_rphy_locked(hw, I217_LPI_GPIO_CTRL, &phy_reg);
+		phy_reg &= ~I217_LPI_GPIO_CTRL_AUTO_EN_LPI;
+		e1e_wphy_locked(hw, I217_LPI_GPIO_CTRL, phy_reg);
+
+		if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+			/* Restore clear on SMB if no manageability engine
+			 * is present
+			 */
+			ret_val = e1e_rphy_locked(hw, I217_MEMPWR, &phy_reg);
+			if (ret_val)
+				goto release;
+			phy_reg |= I217_MEMPWR_DISABLE_SMB_RELEASE;
+			e1e_wphy_locked(hw, I217_MEMPWR, phy_reg);
+
+			/* Disable Proxy */
+			e1e_wphy_locked(hw, I217_PROXY_CTRL, 0);
+		}
+		/* Enable reset on MTA */
+		ret_val = e1e_rphy_locked(hw, I217_CGFREG, &phy_reg);
+		if (ret_val)
+			goto release;
+		phy_reg &= ~I217_CGFREG_ENABLE_MTA_RESET;
+		e1e_wphy_locked(hw, I217_CGFREG, phy_reg);
+release:
+		if (ret_val)
+			e_dbg("Error %d in resume workarounds\n", ret_val);
+		hw->phy.ops.release(hw);
+	}
+}
+
+/**
+ *  e1000_cleanup_led_ich8lan - Restore the default LED operation
+ *  @hw: pointer to the HW structure
+ *
+ *  Return the LED back to the default configuration.
+ **/
+static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw)
+{
+	if (hw->phy.type == e1000_phy_ife)
+		return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+
+	ew32(LEDCTL, hw->mac.ledctl_default);
+	return 0;
+}
+
+/**
+ *  e1000_led_on_ich8lan - Turn LEDs on
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn on the LEDs.
+ **/
+static s32 e1000_led_on_ich8lan(struct e1000_hw *hw)
+{
+	if (hw->phy.type == e1000_phy_ife)
+		return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+				(IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
+
+	ew32(LEDCTL, hw->mac.ledctl_mode2);
+	return 0;
+}
+
+/**
+ *  e1000_led_off_ich8lan - Turn LEDs off
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn off the LEDs.
+ **/
+static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
+{
+	if (hw->phy.type == e1000_phy_ife)
+		return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+				(IFE_PSCL_PROBE_MODE |
+				 IFE_PSCL_PROBE_LEDS_OFF));
+
+	ew32(LEDCTL, hw->mac.ledctl_mode1);
+	return 0;
+}
+
+/**
+ *  e1000_setup_led_pchlan - Configures SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This prepares the SW controllable LED for use.
+ **/
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
+{
+	return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_mode1);
+}
+
+/**
+ *  e1000_cleanup_led_pchlan - Restore the default LED operation
+ *  @hw: pointer to the HW structure
+ *
+ *  Return the LED back to the default configuration.
+ **/
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
+{
+	return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_default);
+}
+
+/**
+ *  e1000_led_on_pchlan - Turn LEDs on
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn on the LEDs.
+ **/
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw)
+{
+	u16 data = (u16)hw->mac.ledctl_mode2;
+	u32 i, led;
+
+	/* If no link, then turn LED on by setting the invert bit
+	 * for each LED that's mode is "link_up" in ledctl_mode2.
+	 */
+	if (!(er32(STATUS) & E1000_STATUS_LU)) {
+		for (i = 0; i < 3; i++) {
+			led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
+			if ((led & E1000_PHY_LED0_MODE_MASK) !=
+			    E1000_LEDCTL_MODE_LINK_UP)
+				continue;
+			if (led & E1000_PHY_LED0_IVRT)
+				data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
+			else
+				data |= (E1000_PHY_LED0_IVRT << (i * 5));
+		}
+	}
+
+	return e1e_wphy(hw, HV_LED_CONFIG, data);
+}
+
+/**
+ *  e1000_led_off_pchlan - Turn LEDs off
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn off the LEDs.
+ **/
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw)
+{
+	u16 data = (u16)hw->mac.ledctl_mode1;
+	u32 i, led;
+
+	/* If no link, then turn LED off by clearing the invert bit
+	 * for each LED that's mode is "link_up" in ledctl_mode1.
+	 */
+	if (!(er32(STATUS) & E1000_STATUS_LU)) {
+		for (i = 0; i < 3; i++) {
+			led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
+			if ((led & E1000_PHY_LED0_MODE_MASK) !=
+			    E1000_LEDCTL_MODE_LINK_UP)
+				continue;
+			if (led & E1000_PHY_LED0_IVRT)
+				data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
+			else
+				data |= (E1000_PHY_LED0_IVRT << (i * 5));
+		}
+	}
+
+	return e1e_wphy(hw, HV_LED_CONFIG, data);
+}
+
+/**
+ *  e1000_get_cfg_done_ich8lan - Read config done bit after Full or PHY reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Read appropriate register for the config done bit for completion status
+ *  and configure the PHY through s/w for EEPROM-less parts.
+ *
+ *  NOTE: some silicon which is EEPROM-less will fail trying to read the
+ *  config done bit, so only an error is logged and continues.  If we were
+ *  to return with error, EEPROM-less silicon would not be able to be reset
+ *  or change link.
+ **/
+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u32 bank = 0;
+	u32 status;
+
+	e1000e_get_cfg_done_generic(hw);
+
+	/* Wait for indication from h/w that it has completed basic config */
+	if (hw->mac.type >= e1000_ich10lan) {
+		e1000_lan_init_done_ich8lan(hw);
+	} else {
+		ret_val = e1000e_get_auto_rd_done(hw);
+		if (ret_val) {
+			/* When auto config read does not complete, do not
+			 * return with an error. This can happen in situations
+			 * where there is no eeprom and prevents getting link.
+			 */
+			e_dbg("Auto Read Done did not complete\n");
+			ret_val = 0;
+		}
+	}
+
+	/* Clear PHY Reset Asserted bit */
+	status = er32(STATUS);
+	if (status & E1000_STATUS_PHYRA)
+		ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+	else
+		e_dbg("PHY Reset Asserted not set - needs delay\n");
+
+	/* If EEPROM is not marked present, init the IGP 3 PHY manually */
+	if (hw->mac.type <= e1000_ich9lan) {
+		if (!(er32(EECD) & E1000_EECD_PRES) &&
+		    (hw->phy.type == e1000_phy_igp_3)) {
+			e1000e_phy_init_script_igp3(hw);
+		}
+	} else {
+		if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
+			/* Maybe we should do a basic PHY config */
+			e_dbg("EEPROM not present\n");
+			ret_val = -E1000_ERR_CONFIG;
+		}
+	}
+
+	return ret_val;
+}
+
+/**
+ * e1000_power_down_phy_copper_ich8lan - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw)
+{
+	/* If the management interface is not enabled, then power down */
+	if (!(hw->mac.ops.check_mng_mode(hw) ||
+	      hw->phy.ops.check_reset_block(hw)))
+		e1000_power_down_phy_copper(hw);
+}
+
+/**
+ *  e1000_clear_hw_cntrs_ich8lan - Clear statistical counters
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears hardware counters specific to the silicon family and calls
+ *  clear_hw_cntrs_generic to clear all general purpose counters.
+ **/
+static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
+{
+	u16 phy_data;
+	s32 ret_val;
+
+	e1000e_clear_hw_cntrs_base(hw);
+
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
+
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
+
+	er32(IAC);
+	er32(ICRXOC);
+
+	/* Clear PHY statistics registers */
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82579) ||
+	    (hw->phy.type == e1000_phy_i217) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return;
+		ret_val = hw->phy.ops.set_page(hw,
+					       HV_STATS_PAGE << IGP_PAGE_SHIFT);
+		if (ret_val)
+			goto release;
+		hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
+release:
+		hw->phy.ops.release(hw);
+	}
+}
+
+static const struct e1000_mac_operations ich8_mac_ops = {
+	/* check_mng_mode dependent on mac type */
+	.check_for_link		= e1000_check_for_copper_link_ich8lan,
+	/* cleanup_led dependent on mac type */
+	.clear_hw_cntrs		= e1000_clear_hw_cntrs_ich8lan,
+	.get_bus_info		= e1000_get_bus_info_ich8lan,
+	.set_lan_id		= e1000_set_lan_id_single_port,
+	.get_link_up_info	= e1000_get_link_up_info_ich8lan,
+	/* led_on dependent on mac type */
+	/* led_off dependent on mac type */
+	.update_mc_addr_list	= e1000e_update_mc_addr_list_generic,
+	.reset_hw		= e1000_reset_hw_ich8lan,
+	.init_hw		= e1000_init_hw_ich8lan,
+	.setup_link		= e1000_setup_link_ich8lan,
+	.setup_physical_interface = e1000_setup_copper_link_ich8lan,
+	/* id_led_init dependent on mac type */
+	.config_collision_dist	= e1000e_config_collision_dist_generic,
+	.rar_set		= e1000e_rar_set_generic,
+	.rar_get_count		= e1000e_rar_get_count_generic,
+};
+
+static const struct e1000_phy_operations ich8_phy_ops = {
+	.acquire		= e1000_acquire_swflag_ich8lan,
+	.check_reset_block	= e1000_check_reset_block_ich8lan,
+	.commit			= NULL,
+	.get_cfg_done		= e1000_get_cfg_done_ich8lan,
+	.get_cable_length	= e1000e_get_cable_length_igp_2,
+	.read_reg		= e1000e_read_phy_reg_igp,
+	.release		= e1000_release_swflag_ich8lan,
+	.reset			= e1000_phy_hw_reset_ich8lan,
+	.set_d0_lplu_state	= e1000_set_d0_lplu_state_ich8lan,
+	.set_d3_lplu_state	= e1000_set_d3_lplu_state_ich8lan,
+	.write_reg		= e1000e_write_phy_reg_igp,
+};
+
+static const struct e1000_nvm_operations ich8_nvm_ops = {
+	.acquire		= e1000_acquire_nvm_ich8lan,
+	.read			= e1000_read_nvm_ich8lan,
+	.release		= e1000_release_nvm_ich8lan,
+	.reload			= e1000e_reload_nvm_generic,
+	.update			= e1000_update_nvm_checksum_ich8lan,
+	.valid_led_default	= e1000_valid_led_default_ich8lan,
+	.validate		= e1000_validate_nvm_checksum_ich8lan,
+	.write			= e1000_write_nvm_ich8lan,
+};
+
+static const struct e1000_nvm_operations spt_nvm_ops = {
+	.acquire		= e1000_acquire_nvm_ich8lan,
+	.release		= e1000_release_nvm_ich8lan,
+	.read			= e1000_read_nvm_spt,
+	.update			= e1000_update_nvm_checksum_spt,
+	.reload			= e1000e_reload_nvm_generic,
+	.valid_led_default	= e1000_valid_led_default_ich8lan,
+	.validate		= e1000_validate_nvm_checksum_ich8lan,
+	.write			= e1000_write_nvm_ich8lan,
+};
+
+const struct e1000_info e1000_ich8_info = {
+	.mac			= e1000_ich8lan,
+	.flags			= FLAG_HAS_WOL
+				  | FLAG_IS_ICH
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_APME_IN_WUC,
+	.pba			= 8,
+	.max_hw_frame_size	= VLAN_ETH_FRAME_LEN + ETH_FCS_LEN,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+
+const struct e1000_info e1000_ich9_info = {
+	.mac			= e1000_ich9lan,
+	.flags			= FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_APME_IN_WUC,
+	.pba			= 18,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+
+const struct e1000_info e1000_ich10_info = {
+	.mac			= e1000_ich10lan,
+	.flags			= FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_APME_IN_WUC,
+	.pba			= 18,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+
+const struct e1000_info e1000_pch_info = {
+	.mac			= e1000_pchlan,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
+				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS,
+	.pba			= 26,
+	.max_hw_frame_size	= 4096,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+
+const struct e1000_info e1000_pch2_info = {
+	.mac			= e1000_pch2lan,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_HW_TIMESTAMP
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS
+				  | FLAG2_HAS_EEE,
+	.pba			= 26,
+	.max_hw_frame_size	= 9022,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+
+const struct e1000_info e1000_pch_lpt_info = {
+	.mac			= e1000_pch_lpt,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_HW_TIMESTAMP
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS
+				  | FLAG2_HAS_EEE,
+	.pba			= 26,
+	.max_hw_frame_size	= 9022,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+
+const struct e1000_info e1000_pch_spt_info = {
+	.mac			= e1000_pch_spt,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_HW_TIMESTAMP
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS
+				  | FLAG2_HAS_EEE,
+	.pba			= 26,
+	.max_hw_frame_size	= 9022,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &spt_nvm_ops,
+};
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
new file mode 100644
index 000000000..770a573b9
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -0,0 +1,303 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000E_ICH8LAN_H_
+#define _E1000E_ICH8LAN_H_
+
+#define ICH_FLASH_GFPREG		0x0000
+#define ICH_FLASH_HSFSTS		0x0004
+#define ICH_FLASH_HSFCTL		0x0006
+#define ICH_FLASH_FADDR			0x0008
+#define ICH_FLASH_FDATA0		0x0010
+#define ICH_FLASH_PR0			0x0074
+
+/* Requires up to 10 seconds when MNG might be accessing part. */
+#define ICH_FLASH_READ_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_WRITE_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_ERASE_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_LINEAR_ADDR_MASK	0x00FFFFFF
+#define ICH_FLASH_CYCLE_REPEAT_COUNT	10
+
+#define ICH_CYCLE_READ			0
+#define ICH_CYCLE_WRITE			2
+#define ICH_CYCLE_ERASE			3
+
+#define FLASH_GFPREG_BASE_MASK		0x1FFF
+#define FLASH_SECTOR_ADDR_SHIFT		12
+
+#define ICH_FLASH_SEG_SIZE_256		256
+#define ICH_FLASH_SEG_SIZE_4K		4096
+#define ICH_FLASH_SEG_SIZE_8K		8192
+#define ICH_FLASH_SEG_SIZE_64K		65536
+
+#define E1000_ICH_FWSM_RSPCIPHY	0x00000040	/* Reset PHY on PCI Reset */
+/* FW established a valid mode */
+#define E1000_ICH_FWSM_FW_VALID	0x00008000
+#define E1000_ICH_FWSM_PCIM2PCI	0x01000000	/* ME PCIm-to-PCI active */
+#define E1000_ICH_FWSM_PCIM2PCI_COUNT	2000
+
+#define E1000_ICH_MNG_IAMT_MODE		0x2
+
+#define E1000_FWSM_WLOCK_MAC_MASK	0x0380
+#define E1000_FWSM_WLOCK_MAC_SHIFT	7
+#define E1000_FWSM_ULP_CFG_DONE		0x00000400	/* Low power cfg done */
+
+/* Shared Receive Address Registers */
+#define E1000_SHRAL_PCH_LPT(_i)		(0x05408 + ((_i) * 8))
+#define E1000_SHRAH_PCH_LPT(_i)		(0x0540C + ((_i) * 8))
+
+#define E1000_H2ME		0x05B50	/* Host to ME */
+#define E1000_H2ME_ULP		0x00000800	/* ULP Indication Bit */
+#define E1000_H2ME_ENFORCE_SETTINGS	0x00001000	/* Enforce Settings */
+
+#define ID_LED_DEFAULT_ICH8LAN	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_OFF2 <<  8) | \
+				 (ID_LED_OFF1_ON2  <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_ICH_NVM_SIG_WORD		0x13
+#define E1000_ICH_NVM_SIG_MASK		0xC000
+#define E1000_ICH_NVM_VALID_SIG_MASK	0xC0
+#define E1000_ICH_NVM_SIG_VALUE		0x80
+
+#define E1000_ICH8_LAN_INIT_TIMEOUT	1500
+
+/* FEXT register bit definition */
+#define E1000_FEXT_PHY_CABLE_DISCONNECTED	0x00000004
+
+#define E1000_FEXTNVM_SW_CONFIG		1
+#define E1000_FEXTNVM_SW_CONFIG_ICH8M	(1 << 27)	/* different on ICH8M */
+
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK	0x0C000000
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC	0x08000000
+
+#define E1000_FEXTNVM4_BEACON_DURATION_MASK	0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_8USEC	0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_16USEC	0x3
+
+#define E1000_FEXTNVM6_REQ_PLL_CLK	0x00000100
+#define E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION	0x00000200
+#define E1000_FEXTNVM6_K1_OFF_ENABLE	0x80000000
+/* bit for disabling packet buffer read */
+#define E1000_FEXTNVM7_DISABLE_PB_READ	0x00040000
+
+#define E1000_FEXTNVM7_DISABLE_SMB_PERST	0x00000020
+
+#define K1_ENTRY_LATENCY	0
+#define K1_MIN_TIME		1
+#define NVM_SIZE_MULTIPLIER 4096	/*multiplier for NVMS field */
+#define E1000_FLASH_BASE_ADDR 0xE000	/*offset of NVM access regs */
+#define E1000_CTRL_EXT_NVMVS 0x3	/*NVM valid sector */
+
+#define PCIE_ICH8_SNOOP_ALL	PCIE_NO_SNOOP_ALL
+
+#define E1000_ICH_RAR_ENTRIES	7
+#define E1000_PCH2_RAR_ENTRIES	5	/* RAR[0], SHRA[0-3] */
+#define E1000_PCH_LPT_RAR_ENTRIES	12	/* RAR[0], SHRA[0-10] */
+
+#define PHY_PAGE_SHIFT		5
+#define PHY_REG(page, reg)	(((page) << PHY_PAGE_SHIFT) | \
+				 ((reg) & MAX_PHY_REG_ADDRESS))
+#define IGP3_KMRN_DIAG	PHY_REG(770, 19)	/* KMRN Diagnostic */
+#define IGP3_VR_CTRL	PHY_REG(776, 18)	/* Voltage Regulator Control */
+
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS		0x0002
+#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK	0x0300
+#define IGP3_VR_CTRL_MODE_SHUTDOWN		0x0200
+
+/* PHY Wakeup Registers and defines */
+#define BM_PORT_GEN_CFG		PHY_REG(BM_PORT_CTRL_PAGE, 17)
+#define BM_RCTL			PHY_REG(BM_WUC_PAGE, 0)
+#define BM_WUC			PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC			PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS			PHY_REG(BM_WUC_PAGE, 3)
+#define BM_RAR_L(_i)		(BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
+#define BM_RAR_M(_i)		(BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
+#define BM_RAR_H(_i)		(BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
+#define BM_RAR_CTRL(_i)		(BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
+#define BM_MTA(_i)		(BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
+
+#define BM_RCTL_UPE		0x0001	/* Unicast Promiscuous Mode */
+#define BM_RCTL_MPE		0x0002	/* Multicast Promiscuous Mode */
+#define BM_RCTL_MO_SHIFT	3	/* Multicast Offset Shift */
+#define BM_RCTL_MO_MASK		(3 << 3)	/* Multicast Offset Mask */
+#define BM_RCTL_BAM		0x0020	/* Broadcast Accept Mode */
+#define BM_RCTL_PMCF		0x0040	/* Pass MAC Control Frames */
+#define BM_RCTL_RFCE		0x0080	/* Rx Flow Control Enable */
+
+#define HV_LED_CONFIG		PHY_REG(768, 30)	/* LED Configuration */
+#define HV_MUX_DATA_CTRL	PHY_REG(776, 16)
+#define HV_MUX_DATA_CTRL_GEN_TO_MAC	0x0400
+#define HV_MUX_DATA_CTRL_FORCE_SPEED	0x0004
+#define HV_STATS_PAGE	778
+/* Half-duplex collision counts */
+#define HV_SCC_UPPER	PHY_REG(HV_STATS_PAGE, 16)	/* Single Collision */
+#define HV_SCC_LOWER	PHY_REG(HV_STATS_PAGE, 17)
+#define HV_ECOL_UPPER	PHY_REG(HV_STATS_PAGE, 18)	/* Excessive Coll. */
+#define HV_ECOL_LOWER	PHY_REG(HV_STATS_PAGE, 19)
+#define HV_MCC_UPPER	PHY_REG(HV_STATS_PAGE, 20)	/* Multiple Collision */
+#define HV_MCC_LOWER	PHY_REG(HV_STATS_PAGE, 21)
+#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23)	/* Late Collision */
+#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
+#define HV_COLC_UPPER	PHY_REG(HV_STATS_PAGE, 25)	/* Collision */
+#define HV_COLC_LOWER	PHY_REG(HV_STATS_PAGE, 26)
+#define HV_DC_UPPER	PHY_REG(HV_STATS_PAGE, 27)	/* Defer Count */
+#define HV_DC_LOWER	PHY_REG(HV_STATS_PAGE, 28)
+#define HV_TNCRS_UPPER	PHY_REG(HV_STATS_PAGE, 29)	/* Tx with no CRS */
+#define HV_TNCRS_LOWER	PHY_REG(HV_STATS_PAGE, 30)
+
+#define E1000_FCRTV_PCH	0x05F40	/* PCH Flow Control Refresh Timer Value */
+
+#define E1000_NVM_K1_CONFIG	0x1B	/* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE	0x1	/* NVM Enable K1 bit */
+
+/* SMBus Control Phy Register */
+#define CV_SMB_CTRL		PHY_REG(769, 23)
+#define CV_SMB_CTRL_FORCE_SMBUS	0x0001
+
+/* I218 Ultra Low Power Configuration 1 Register */
+#define I218_ULP_CONFIG1		PHY_REG(779, 16)
+#define I218_ULP_CONFIG1_START		0x0001	/* Start auto ULP config */
+#define I218_ULP_CONFIG1_IND		0x0004	/* Pwr up from ULP indication */
+#define I218_ULP_CONFIG1_STICKY_ULP	0x0010	/* Set sticky ULP mode */
+#define I218_ULP_CONFIG1_INBAND_EXIT	0x0020	/* Inband on ULP exit */
+#define I218_ULP_CONFIG1_WOL_HOST	0x0040	/* WoL Host on ULP exit */
+#define I218_ULP_CONFIG1_RESET_TO_SMBUS	0x0100	/* Reset to SMBus mode */
+#define I218_ULP_CONFIG1_DISABLE_SMB_PERST	0x1000	/* Disable on PERST# */
+
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR		PHY_REG(768, 26)
+#define HV_SMB_ADDR_MASK	0x007F
+#define HV_SMB_ADDR_PEC_EN	0x0200
+#define HV_SMB_ADDR_VALID	0x0080
+#define HV_SMB_ADDR_FREQ_MASK		0x1100
+#define HV_SMB_ADDR_FREQ_LOW_SHIFT	8
+#define HV_SMB_ADDR_FREQ_HIGH_SHIFT	12
+
+/* Strapping Option Register - RO */
+#define E1000_STRAP			0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK	0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT	17
+#define E1000_STRAP_SMT_FREQ_MASK	0x00003000
+#define E1000_STRAP_SMT_FREQ_SHIFT	12
+
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS		PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU	0x0004	/* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS	0x0040	/* Gigabit Disable */
+#define HV_OEM_BITS_RESTART_AN	0x0400	/* Restart Auto-negotiation */
+
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL	PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW	0x0400
+
+/* KMRN FIFO Control and Status */
+#define HV_KMRN_FIFO_CTRLSTA			PHY_REG(770, 16)
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK	0x7000
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT	12
+
+/* PHY Power Management Control */
+#define HV_PM_CTRL		PHY_REG(770, 17)
+#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA	0x100
+#define HV_PM_CTRL_K1_ENABLE		0x4000
+
+#define SW_FLAG_TIMEOUT		1000	/* SW Semaphore flag timeout in ms */
+
+/* Inband Control */
+#define I217_INBAND_CTRL				PHY_REG(770, 18)
+#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK	0x3F00
+#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT	8
+
+/* Low Power Idle GPIO Control */
+#define I217_LPI_GPIO_CTRL			PHY_REG(772, 18)
+#define I217_LPI_GPIO_CTRL_AUTO_EN_LPI		0x0800
+
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL				PHY_REG(772, 20)
+#define I82579_LPI_CTRL_100_ENABLE		0x2000
+#define I82579_LPI_CTRL_1000_ENABLE		0x4000
+#define I82579_LPI_CTRL_ENABLE_MASK		0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT	0x80
+
+/* Extended Management Interface (EMI) Registers */
+#define I82579_EMI_ADDR		0x10
+#define I82579_EMI_DATA		0x11
+#define I82579_LPI_UPDATE_TIMER	0x4805	/* in 40ns units + 40 ns base value */
+#define I82579_MSE_THRESHOLD	0x084F	/* 82579 Mean Square Error Threshold */
+#define I82577_MSE_THRESHOLD	0x0887	/* 82577 Mean Square Error Threshold */
+#define I82579_MSE_LINK_DOWN	0x2411	/* MSE count before dropping link */
+#define I82579_RX_CONFIG		0x3412	/* Receive configuration */
+#define I82579_LPI_PLL_SHUT		0x4412	/* LPI PLL Shut Enable */
+#define I82579_EEE_PCS_STATUS		0x182E	/* IEEE MMD Register 3.1 >> 8 */
+#define I82579_EEE_CAPABILITY		0x0410	/* IEEE MMD Register 3.20 */
+#define I82579_EEE_ADVERTISEMENT	0x040E	/* IEEE MMD Register 7.60 */
+#define I82579_EEE_LP_ABILITY		0x040F	/* IEEE MMD Register 7.61 */
+#define I82579_EEE_100_SUPPORTED	(1 << 1)	/* 100BaseTx EEE */
+#define I82579_EEE_1000_SUPPORTED	(1 << 2)	/* 1000BaseTx EEE */
+#define I82579_LPI_100_PLL_SHUT	(1 << 2)	/* 100M LPI PLL Shut Enabled */
+#define I217_EEE_PCS_STATUS	0x9401	/* IEEE MMD Register 3.1 */
+#define I217_EEE_CAPABILITY	0x8000	/* IEEE MMD Register 3.20 */
+#define I217_EEE_ADVERTISEMENT	0x8001	/* IEEE MMD Register 7.60 */
+#define I217_EEE_LP_ABILITY	0x8002	/* IEEE MMD Register 7.61 */
+#define I217_RX_CONFIG		0xB20C	/* Receive configuration */
+
+#define E1000_EEE_RX_LPI_RCVD	0x0400	/* Tx LP idle received */
+#define E1000_EEE_TX_LPI_RCVD	0x0800	/* Rx LP idle received */
+
+/* Intel Rapid Start Technology Support */
+#define I217_PROXY_CTRL		BM_PHY_REG(BM_WUC_PAGE, 70)
+#define I217_PROXY_CTRL_AUTO_DISABLE	0x0080
+#define I217_SxCTRL			PHY_REG(BM_PORT_CTRL_PAGE, 28)
+#define I217_SxCTRL_ENABLE_LPI_RESET	0x1000
+#define I217_CGFREG			PHY_REG(772, 29)
+#define I217_CGFREG_ENABLE_MTA_RESET	0x0002
+#define I217_MEMPWR			PHY_REG(772, 26)
+#define I217_MEMPWR_DISABLE_SMB_RELEASE	0x0010
+
+/* Receive Address Initial CRC Calculation */
+#define E1000_PCH_RAICC(_n)	(0x05F50 + ((_n) * 4))
+
+/* Latency Tolerance Reporting */
+#define E1000_LTRV			0x000F8
+#define E1000_LTRV_SCALE_MAX		5
+#define E1000_LTRV_SCALE_FACTOR		5
+#define E1000_LTRV_REQ_SHIFT		15
+#define E1000_LTRV_NOSNOOP_SHIFT	16
+#define E1000_LTRV_SEND			(1 << 30)
+
+/* Proprietary Latency Tolerance Reporting PCI Capability */
+#define E1000_PCI_LTR_CAP_LPT		0xA8
+
+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
+void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+						  bool state);
+void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
+void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
+void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
+void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
+s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
+s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
+s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data);
+s32 e1000_set_eee_pchlan(struct e1000_hw *hw);
+s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx);
+#endif /* _E1000E_ICH8LAN_H_ */
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
new file mode 100644
index 000000000..30b74d590
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -0,0 +1,1800 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include "e1000.h"
+
+/**
+ *  e1000e_get_bus_info_pcie - Get PCIe bus information
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines and stores the system bus information for a particular
+ *  network interface.  The following bus information is determined and stored:
+ *  bus speed, bus width, type (PCIe), and PCIe function.
+ **/
+s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	struct e1000_bus_info *bus = &hw->bus;
+	struct e1000_adapter *adapter = hw->adapter;
+	u16 pcie_link_status, cap_offset;
+
+	cap_offset = adapter->pdev->pcie_cap;
+	if (!cap_offset) {
+		bus->width = e1000_bus_width_unknown;
+	} else {
+		pci_read_config_word(adapter->pdev,
+				     cap_offset + PCIE_LINK_STATUS,
+				     &pcie_link_status);
+		bus->width = (enum e1000_bus_width)((pcie_link_status &
+						     PCIE_LINK_WIDTH_MASK) >>
+						    PCIE_LINK_WIDTH_SHIFT);
+	}
+
+	mac->ops.set_lan_id(hw);
+
+	return 0;
+}
+
+/**
+ *  e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ *
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines the LAN function id by reading memory-mapped registers
+ *  and swaps the port value if requested.
+ **/
+void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw)
+{
+	struct e1000_bus_info *bus = &hw->bus;
+	u32 reg;
+
+	/* The status register reports the correct function number
+	 * for the device regardless of function swap state.
+	 */
+	reg = er32(STATUS);
+	bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
+}
+
+/**
+ *  e1000_set_lan_id_single_port - Set LAN id for a single port device
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets the LAN function id to zero for a single port device.
+ **/
+void e1000_set_lan_id_single_port(struct e1000_hw *hw)
+{
+	struct e1000_bus_info *bus = &hw->bus;
+
+	bus->func = 0;
+}
+
+/**
+ *  e1000_clear_vfta_generic - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the register array which contains the VLAN filter table by
+ *  setting all the values to 0.
+ **/
+void e1000_clear_vfta_generic(struct e1000_hw *hw)
+{
+	u32 offset;
+
+	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+		E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0);
+		e1e_flush();
+	}
+}
+
+/**
+ *  e1000_write_vfta_generic - Write value to VLAN filter table
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset in VLAN filter table
+ *  @value: register value written to VLAN filter table
+ *
+ *  Writes value at the given offset in the register array which stores
+ *  the VLAN filter table.
+ **/
+void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
+{
+	E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
+	e1e_flush();
+}
+
+/**
+ *  e1000e_init_rx_addrs - Initialize receive address's
+ *  @hw: pointer to the HW structure
+ *  @rar_count: receive address registers
+ *
+ *  Setup the receive address registers by setting the base receive address
+ *  register to the devices MAC address and clearing all the other receive
+ *  address registers to 0.
+ **/
+void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
+{
+	u32 i;
+	u8 mac_addr[ETH_ALEN] = { 0 };
+
+	/* Setup the receive address */
+	e_dbg("Programming MAC Address into RAR[0]\n");
+
+	hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+	/* Zero out the other (rar_entry_count - 1) receive addresses */
+	e_dbg("Clearing RAR[1-%u]\n", rar_count - 1);
+	for (i = 1; i < rar_count; i++)
+		hw->mac.ops.rar_set(hw, mac_addr, i);
+}
+
+/**
+ *  e1000_check_alt_mac_addr_generic - Check for alternate MAC addr
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks the nvm for an alternate MAC address.  An alternate MAC address
+ *  can be setup by pre-boot software and must be treated like a permanent
+ *  address and must override the actual permanent MAC address. If an
+ *  alternate MAC address is found it is programmed into RAR0, replacing
+ *  the permanent address that was installed into RAR0 by the Si on reset.
+ *  This function will return SUCCESS unless it encounters an error while
+ *  reading the EEPROM.
+ **/
+s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
+{
+	u32 i;
+	s32 ret_val;
+	u16 offset, nvm_alt_mac_addr_offset, nvm_data;
+	u8 alt_mac_addr[ETH_ALEN];
+
+	ret_val = e1000_read_nvm(hw, NVM_COMPAT, 1, &nvm_data);
+	if (ret_val)
+		return ret_val;
+
+	/* not supported on 82573 */
+	if (hw->mac.type == e1000_82573)
+		return 0;
+
+	ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
+				 &nvm_alt_mac_addr_offset);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if ((nvm_alt_mac_addr_offset == 0xFFFF) ||
+	    (nvm_alt_mac_addr_offset == 0x0000))
+		/* There is no Alternate MAC Address */
+		return 0;
+
+	if (hw->bus.func == E1000_FUNC_1)
+		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
+	for (i = 0; i < ETH_ALEN; i += 2) {
+		offset = nvm_alt_mac_addr_offset + (i >> 1);
+		ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
+		if (ret_val) {
+			e_dbg("NVM Read Error\n");
+			return ret_val;
+		}
+
+		alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
+		alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
+	}
+
+	/* if multicast bit is set, the alternate address will not be used */
+	if (is_multicast_ether_addr(alt_mac_addr)) {
+		e_dbg("Ignoring Alternate Mac Address with MC bit set\n");
+		return 0;
+	}
+
+	/* We have a valid alternate MAC address, and we want to treat it the
+	 * same as the normal permanent MAC address stored by the HW into the
+	 * RAR. Do this by mapping this address into RAR0.
+	 */
+	hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
+
+	return 0;
+}
+
+u32 e1000e_rar_get_count_generic(struct e1000_hw *hw)
+{
+	return hw->mac.rar_entry_count;
+}
+
+/**
+ *  e1000e_rar_set_generic - Set receive address register
+ *  @hw: pointer to the HW structure
+ *  @addr: pointer to the receive address
+ *  @index: receive address array register
+ *
+ *  Sets the receive address array register at index to the address passed
+ *  in by addr.
+ **/
+int e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+	u32 rar_low, rar_high;
+
+	/* HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
+		   ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+
+	rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
+
+	/* If MAC address zero, no need to set the AV bit */
+	if (rar_low || rar_high)
+		rar_high |= E1000_RAH_AV;
+
+	/* Some bridges will combine consecutive 32-bit writes into
+	 * a single burst write, which will malfunction on some parts.
+	 * The flushes avoid this.
+	 */
+	ew32(RAL(index), rar_low);
+	e1e_flush();
+	ew32(RAH(index), rar_high);
+	e1e_flush();
+
+	return 0;
+}
+
+/**
+ *  e1000_hash_mc_addr - Generate a multicast hash value
+ *  @hw: pointer to the HW structure
+ *  @mc_addr: pointer to a multicast address
+ *
+ *  Generates a multicast address hash value which is used to determine
+ *  the multicast filter table array address and new table value.
+ **/
+static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+	u32 hash_value, hash_mask;
+	u8 bit_shift = 0;
+
+	/* Register count multiplied by bits per register */
+	hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+	/* For a mc_filter_type of 0, bit_shift is the number of left-shifts
+	 * where 0xFF would still fall within the hash mask.
+	 */
+	while (hash_mask >> bit_shift != 0xFF)
+		bit_shift++;
+
+	/* The portion of the address that is used for the hash table
+	 * is determined by the mc_filter_type setting.
+	 * The algorithm is such that there is a total of 8 bits of shifting.
+	 * The bit_shift for a mc_filter_type of 0 represents the number of
+	 * left-shifts where the MSB of mc_addr[5] would still fall within
+	 * the hash_mask.  Case 0 does this exactly.  Since there are a total
+	 * of 8 bits of shifting, then mc_addr[4] will shift right the
+	 * remaining number of bits. Thus 8 - bit_shift.  The rest of the
+	 * cases are a variation of this algorithm...essentially raising the
+	 * number of bits to shift mc_addr[5] left, while still keeping the
+	 * 8-bit shifting total.
+	 *
+	 * For example, given the following Destination MAC Address and an
+	 * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
+	 * we can see that the bit_shift for case 0 is 4.  These are the hash
+	 * values resulting from each mc_filter_type...
+	 * [0] [1] [2] [3] [4] [5]
+	 * 01  AA  00  12  34  56
+	 * LSB           MSB
+	 *
+	 * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
+	 * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
+	 * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
+	 * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
+	 */
+	switch (hw->mac.mc_filter_type) {
+	default:
+	case 0:
+		break;
+	case 1:
+		bit_shift += 1;
+		break;
+	case 2:
+		bit_shift += 2;
+		break;
+	case 3:
+		bit_shift += 4;
+		break;
+	}
+
+	hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+				   (((u16)mc_addr[5]) << bit_shift)));
+
+	return hash_value;
+}
+
+/**
+ *  e1000e_update_mc_addr_list_generic - Update Multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @mc_addr_list: array of multicast addresses to program
+ *  @mc_addr_count: number of multicast addresses to program
+ *
+ *  Updates entire Multicast Table Array.
+ *  The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
+					u8 *mc_addr_list, u32 mc_addr_count)
+{
+	u32 hash_value, hash_bit, hash_reg;
+	int i;
+
+	/* clear mta_shadow */
+	memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+	/* update mta_shadow from mc_addr_list */
+	for (i = 0; (u32)i < mc_addr_count; i++) {
+		hash_value = e1000_hash_mc_addr(hw, mc_addr_list);
+
+		hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+		hash_bit = hash_value & 0x1F;
+
+		hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+		mc_addr_list += (ETH_ALEN);
+	}
+
+	/* replace the entire MTA table */
+	for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]);
+	e1e_flush();
+}
+
+/**
+ *  e1000e_clear_hw_cntrs_base - Clear base hardware counters
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the base hardware counters by reading the counter registers.
+ **/
+void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
+{
+	er32(CRCERRS);
+	er32(SYMERRS);
+	er32(MPC);
+	er32(SCC);
+	er32(ECOL);
+	er32(MCC);
+	er32(LATECOL);
+	er32(COLC);
+	er32(DC);
+	er32(SEC);
+	er32(RLEC);
+	er32(XONRXC);
+	er32(XONTXC);
+	er32(XOFFRXC);
+	er32(XOFFTXC);
+	er32(FCRUC);
+	er32(GPRC);
+	er32(BPRC);
+	er32(MPRC);
+	er32(GPTC);
+	er32(GORCL);
+	er32(GORCH);
+	er32(GOTCL);
+	er32(GOTCH);
+	er32(RNBC);
+	er32(RUC);
+	er32(RFC);
+	er32(ROC);
+	er32(RJC);
+	er32(TORL);
+	er32(TORH);
+	er32(TOTL);
+	er32(TOTH);
+	er32(TPR);
+	er32(TPT);
+	er32(MPTC);
+	er32(BPTC);
+}
+
+/**
+ *  e1000e_check_for_copper_link - Check for link (Copper)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks to see of the link status of the hardware has changed.  If a
+ *  change in link status has been detected, then we read the PHY registers
+ *  to get the current speed/duplex if link exists.
+ **/
+s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	bool link;
+
+	/* We only want to go out to the PHY registers to see if Auto-Neg
+	 * has completed and/or if our link status has changed.  The
+	 * get_link_status flag is set upon receiving a Link Status
+	 * Change or Rx Sequence Error interrupt.
+	 */
+	if (!mac->get_link_status)
+		return 0;
+
+	/* First we want to see if the MII Status Register reports
+	 * link.  If so, then we want to get the current speed/duplex
+	 * of the PHY.
+	 */
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link)
+		return 0;	/* No link detected */
+
+	mac->get_link_status = false;
+
+	/* Check if there was DownShift, must be checked
+	 * immediately after link-up
+	 */
+	e1000e_check_downshift(hw);
+
+	/* If we are forcing speed/duplex, then we simply return since
+	 * we have already determined whether we have link or not.
+	 */
+	if (!mac->autoneg)
+		return -E1000_ERR_CONFIG;
+
+	/* Auto-Neg is enabled.  Auto Speed Detection takes care
+	 * of MAC speed/duplex configuration.  So we only need to
+	 * configure Collision Distance in the MAC.
+	 */
+	mac->ops.config_collision_dist(hw);
+
+	/* Configure Flow Control now that Auto-Neg has completed.
+	 * First, we need to restore the desired flow control
+	 * settings because we may have had to re-autoneg with a
+	 * different link partner.
+	 */
+	ret_val = e1000e_config_fc_after_link_up(hw);
+	if (ret_val)
+		e_dbg("Error configuring flow control\n");
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_check_for_fiber_link - Check for link (Fiber)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks for link up on the hardware.  If link is not up and we have
+ *  a signal, then we need to force link up.
+ **/
+s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 rxcw;
+	u32 ctrl;
+	u32 status;
+	s32 ret_val;
+
+	ctrl = er32(CTRL);
+	status = er32(STATUS);
+	rxcw = er32(RXCW);
+
+	/* If we don't have link (auto-negotiation failed or link partner
+	 * cannot auto-negotiate), the cable is plugged in (we have signal),
+	 * and our link partner is not trying to auto-negotiate with us (we
+	 * are receiving idles or data), we need to force link up. We also
+	 * need to give auto-negotiation time to complete, in case the cable
+	 * was just plugged in. The autoneg_failed flag does this.
+	 */
+	/* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
+	if ((ctrl & E1000_CTRL_SWDPIN1) && !(status & E1000_STATUS_LU) &&
+	    !(rxcw & E1000_RXCW_C)) {
+		if (!mac->autoneg_failed) {
+			mac->autoneg_failed = true;
+			return 0;
+		}
+		e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
+
+		/* Disable auto-negotiation in the TXCW register */
+		ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
+
+		/* Force link-up and also force full-duplex. */
+		ctrl = er32(CTRL);
+		ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+		ew32(CTRL, ctrl);
+
+		/* Configure Flow Control after forcing link up. */
+		ret_val = e1000e_config_fc_after_link_up(hw);
+		if (ret_val) {
+			e_dbg("Error configuring flow control\n");
+			return ret_val;
+		}
+	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+		/* If we are forcing link and we are receiving /C/ ordered
+		 * sets, re-enable auto-negotiation in the TXCW register
+		 * and disable forced link in the Device Control register
+		 * in an attempt to auto-negotiate with our link partner.
+		 */
+		e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
+		ew32(TXCW, mac->txcw);
+		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+		mac->serdes_has_link = true;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_check_for_serdes_link - Check for link (Serdes)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks for link up on the hardware.  If link is not up and we have
+ *  a signal, then we need to force link up.
+ **/
+s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 rxcw;
+	u32 ctrl;
+	u32 status;
+	s32 ret_val;
+
+	ctrl = er32(CTRL);
+	status = er32(STATUS);
+	rxcw = er32(RXCW);
+
+	/* If we don't have link (auto-negotiation failed or link partner
+	 * cannot auto-negotiate), and our link partner is not trying to
+	 * auto-negotiate with us (we are receiving idles or data),
+	 * we need to force link up. We also need to give auto-negotiation
+	 * time to complete.
+	 */
+	/* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
+	if (!(status & E1000_STATUS_LU) && !(rxcw & E1000_RXCW_C)) {
+		if (!mac->autoneg_failed) {
+			mac->autoneg_failed = true;
+			return 0;
+		}
+		e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
+
+		/* Disable auto-negotiation in the TXCW register */
+		ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
+
+		/* Force link-up and also force full-duplex. */
+		ctrl = er32(CTRL);
+		ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+		ew32(CTRL, ctrl);
+
+		/* Configure Flow Control after forcing link up. */
+		ret_val = e1000e_config_fc_after_link_up(hw);
+		if (ret_val) {
+			e_dbg("Error configuring flow control\n");
+			return ret_val;
+		}
+	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+		/* If we are forcing link and we are receiving /C/ ordered
+		 * sets, re-enable auto-negotiation in the TXCW register
+		 * and disable forced link in the Device Control register
+		 * in an attempt to auto-negotiate with our link partner.
+		 */
+		e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
+		ew32(TXCW, mac->txcw);
+		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+		mac->serdes_has_link = true;
+	} else if (!(E1000_TXCW_ANE & er32(TXCW))) {
+		/* If we force link for non-auto-negotiation switch, check
+		 * link status based on MAC synchronization for internal
+		 * serdes media type.
+		 */
+		/* SYNCH bit and IV bit are sticky. */
+		usleep_range(10, 20);
+		rxcw = er32(RXCW);
+		if (rxcw & E1000_RXCW_SYNCH) {
+			if (!(rxcw & E1000_RXCW_IV)) {
+				mac->serdes_has_link = true;
+				e_dbg("SERDES: Link up - forced.\n");
+			}
+		} else {
+			mac->serdes_has_link = false;
+			e_dbg("SERDES: Link down - force failed.\n");
+		}
+	}
+
+	if (E1000_TXCW_ANE & er32(TXCW)) {
+		status = er32(STATUS);
+		if (status & E1000_STATUS_LU) {
+			/* SYNCH bit and IV bit are sticky, so reread rxcw. */
+			usleep_range(10, 20);
+			rxcw = er32(RXCW);
+			if (rxcw & E1000_RXCW_SYNCH) {
+				if (!(rxcw & E1000_RXCW_IV)) {
+					mac->serdes_has_link = true;
+					e_dbg("SERDES: Link up - autoneg completed successfully.\n");
+				} else {
+					mac->serdes_has_link = false;
+					e_dbg("SERDES: Link down - invalid codewords detected in autoneg.\n");
+				}
+			} else {
+				mac->serdes_has_link = false;
+				e_dbg("SERDES: Link down - no sync.\n");
+			}
+		} else {
+			mac->serdes_has_link = false;
+			e_dbg("SERDES: Link down - autoneg failed\n");
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_set_default_fc_generic - Set flow control default values
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the EEPROM for the default values for flow control and store the
+ *  values.
+ **/
+static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 nvm_data;
+
+	/* Read and store word 0x0F of the EEPROM. This word contains bits
+	 * that determine the hardware's default PAUSE (flow control) mode,
+	 * a bit that determines whether the HW defaults to enabling or
+	 * disabling auto-negotiation, and the direction of the
+	 * SW defined pins. If there is no SW over-ride of the flow
+	 * control setting, then the variable hw->fc will
+	 * be initialized based on a value in the EEPROM.
+	 */
+	ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
+
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (!(nvm_data & NVM_WORD0F_PAUSE_MASK))
+		hw->fc.requested_mode = e1000_fc_none;
+	else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == NVM_WORD0F_ASM_DIR)
+		hw->fc.requested_mode = e1000_fc_tx_pause;
+	else
+		hw->fc.requested_mode = e1000_fc_full;
+
+	return 0;
+}
+
+/**
+ *  e1000e_setup_link_generic - Setup flow control and link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines which flow control settings to use, then configures flow
+ *  control.  Calls the appropriate media-specific link configuration
+ *  function.  Assuming the adapter has a valid link partner, a valid link
+ *  should be established.  Assumes the hardware has previously been reset
+ *  and the transmitter and receiver are not enabled.
+ **/
+s32 e1000e_setup_link_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	/* In the case of the phy reset being blocked, we already have a link.
+	 * We do not need to set it up again.
+	 */
+	if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
+		return 0;
+
+	/* If requested flow control is set to default, set flow control
+	 * based on the EEPROM flow control settings.
+	 */
+	if (hw->fc.requested_mode == e1000_fc_default) {
+		ret_val = e1000_set_default_fc_generic(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Save off the requested flow control mode for use later.  Depending
+	 * on the link partner's capabilities, we may or may not use this mode.
+	 */
+	hw->fc.current_mode = hw->fc.requested_mode;
+
+	e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
+
+	/* Call the necessary media_type subroutine to configure the link. */
+	ret_val = hw->mac.ops.setup_physical_interface(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Initialize the flow control address, type, and PAUSE timer
+	 * registers to their default values.  This is done even if flow
+	 * control is disabled, because it does not hurt anything to
+	 * initialize these registers.
+	 */
+	e_dbg("Initializing the Flow Control address, type and timer regs\n");
+	ew32(FCT, FLOW_CONTROL_TYPE);
+	ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+	ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+	ew32(FCTTV, hw->fc.pause_time);
+
+	return e1000e_set_fc_watermarks(hw);
+}
+
+/**
+ *  e1000_commit_fc_settings_generic - Configure flow control
+ *  @hw: pointer to the HW structure
+ *
+ *  Write the flow control settings to the Transmit Config Word Register (TXCW)
+ *  base on the flow control settings in e1000_mac_info.
+ **/
+static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 txcw;
+
+	/* Check for a software override of the flow control settings, and
+	 * setup the device accordingly.  If auto-negotiation is enabled, then
+	 * software will have to set the "PAUSE" bits to the correct value in
+	 * the Transmit Config Word Register (TXCW) and re-start auto-
+	 * negotiation.  However, if auto-negotiation is disabled, then
+	 * software will have to manually configure the two flow control enable
+	 * bits in the CTRL register.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause frames,
+	 *          but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames but we
+	 *          do not support receiving pause frames).
+	 *      3:  Both Rx and Tx flow control (symmetric) are enabled.
+	 */
+	switch (hw->fc.current_mode) {
+	case e1000_fc_none:
+		/* Flow control completely disabled by a software over-ride. */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+		break;
+	case e1000_fc_rx_pause:
+		/* Rx Flow control is enabled and Tx Flow control is disabled
+		 * by a software over-ride. Since there really isn't a way to
+		 * advertise that we are capable of Rx Pause ONLY, we will
+		 * advertise that we support both symmetric and asymmetric Rx
+		 * PAUSE.  Later, we will disable the adapter's ability to send
+		 * PAUSE frames.
+		 */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+		break;
+	case e1000_fc_tx_pause:
+		/* Tx Flow control is enabled, and Rx Flow control is disabled,
+		 * by a software over-ride.
+		 */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
+		break;
+	case e1000_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by a software
+		 * over-ride.
+		 */
+		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+		break;
+	default:
+		e_dbg("Flow control param set incorrectly\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	ew32(TXCW, txcw);
+	mac->txcw = txcw;
+
+	return 0;
+}
+
+/**
+ *  e1000_poll_fiber_serdes_link_generic - Poll for link up
+ *  @hw: pointer to the HW structure
+ *
+ *  Polls for link up by reading the status register, if link fails to come
+ *  up with auto-negotiation, then the link is forced if a signal is detected.
+ **/
+static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 i, status;
+	s32 ret_val;
+
+	/* If we have a signal (the cable is plugged in, or assumed true for
+	 * serdes media) then poll for a "Link-Up" indication in the Device
+	 * Status Register.  Time-out if a link isn't seen in 500 milliseconds
+	 * seconds (Auto-negotiation should complete in less than 500
+	 * milliseconds even if the other end is doing it in SW).
+	 */
+	for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
+		usleep_range(10000, 20000);
+		status = er32(STATUS);
+		if (status & E1000_STATUS_LU)
+			break;
+	}
+	if (i == FIBER_LINK_UP_LIMIT) {
+		e_dbg("Never got a valid link from auto-neg!!!\n");
+		mac->autoneg_failed = true;
+		/* AutoNeg failed to achieve a link, so we'll call
+		 * mac->check_for_link. This routine will force the
+		 * link up if we detect a signal. This will allow us to
+		 * communicate with non-autonegotiating link partners.
+		 */
+		ret_val = mac->ops.check_for_link(hw);
+		if (ret_val) {
+			e_dbg("Error while checking for link\n");
+			return ret_val;
+		}
+		mac->autoneg_failed = false;
+	} else {
+		mac->autoneg_failed = false;
+		e_dbg("Valid Link Found\n");
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_setup_fiber_serdes_link - Setup link for fiber/serdes
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures collision distance and flow control for fiber and serdes
+ *  links.  Upon successful setup, poll for link.
+ **/
+s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+
+	ctrl = er32(CTRL);
+
+	/* Take the link out of reset */
+	ctrl &= ~E1000_CTRL_LRST;
+
+	hw->mac.ops.config_collision_dist(hw);
+
+	ret_val = e1000_commit_fc_settings_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Since auto-negotiation is enabled, take the link out of reset (the
+	 * link will be in reset, because we previously reset the chip). This
+	 * will restart auto-negotiation.  If auto-negotiation is successful
+	 * then the link-up status bit will be set and the flow control enable
+	 * bits (RFCE and TFCE) will be set according to their negotiated value.
+	 */
+	e_dbg("Auto-negotiation enabled\n");
+
+	ew32(CTRL, ctrl);
+	e1e_flush();
+	usleep_range(1000, 2000);
+
+	/* For these adapters, the SW definable pin 1 is set when the optics
+	 * detect a signal.  If we have a signal, then poll for a "Link-Up"
+	 * indication.
+	 */
+	if (hw->phy.media_type == e1000_media_type_internal_serdes ||
+	    (er32(CTRL) & E1000_CTRL_SWDPIN1)) {
+		ret_val = e1000_poll_fiber_serdes_link_generic(hw);
+	} else {
+		e_dbg("No signal detected\n");
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_config_collision_dist_generic - Configure collision distance
+ *  @hw: pointer to the HW structure
+ *
+ *  Configures the collision distance to the default value and is used
+ *  during link setup.
+ **/
+void e1000e_config_collision_dist_generic(struct e1000_hw *hw)
+{
+	u32 tctl;
+
+	tctl = er32(TCTL);
+
+	tctl &= ~E1000_TCTL_COLD;
+	tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+
+	ew32(TCTL, tctl);
+	e1e_flush();
+}
+
+/**
+ *  e1000e_set_fc_watermarks - Set flow control high/low watermarks
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets the flow control high/low threshold (watermark) registers.  If
+ *  flow control XON frame transmission is enabled, then set XON frame
+ *  transmission as well.
+ **/
+s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
+{
+	u32 fcrtl = 0, fcrth = 0;
+
+	/* Set the flow control receive threshold registers.  Normally,
+	 * these registers will be set to a default threshold that may be
+	 * adjusted later by the driver's runtime code.  However, if the
+	 * ability to transmit pause frames is not enabled, then these
+	 * registers will be set to 0.
+	 */
+	if (hw->fc.current_mode & e1000_fc_tx_pause) {
+		/* We need to set up the Receive Threshold high and low water
+		 * marks as well as (optionally) enabling the transmission of
+		 * XON frames.
+		 */
+		fcrtl = hw->fc.low_water;
+		if (hw->fc.send_xon)
+			fcrtl |= E1000_FCRTL_XONE;
+
+		fcrth = hw->fc.high_water;
+	}
+	ew32(FCRTL, fcrtl);
+	ew32(FCRTH, fcrth);
+
+	return 0;
+}
+
+/**
+ *  e1000e_force_mac_fc - Force the MAC's flow control settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Force the MAC's flow control settings.  Sets the TFCE and RFCE bits in the
+ *  device control register to reflect the adapter settings.  TFCE and RFCE
+ *  need to be explicitly set by software when a copper PHY is used because
+ *  autonegotiation is managed by the PHY rather than the MAC.  Software must
+ *  also configure these bits when link is forced on a fiber connection.
+ **/
+s32 e1000e_force_mac_fc(struct e1000_hw *hw)
+{
+	u32 ctrl;
+
+	ctrl = er32(CTRL);
+
+	/* Because we didn't get link via the internal auto-negotiation
+	 * mechanism (we either forced link or we got link via PHY
+	 * auto-neg), we have to manually enable/disable transmit an
+	 * receive flow control.
+	 *
+	 * The "Case" statement below enables/disable flow control
+	 * according to the "hw->fc.current_mode" parameter.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause
+	 *          frames but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames
+	 *          frames but we do not receive pause frames).
+	 *      3:  Both Rx and Tx flow control (symmetric) is enabled.
+	 *  other:  No other values should be possible at this point.
+	 */
+	e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
+
+	switch (hw->fc.current_mode) {
+	case e1000_fc_none:
+		ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+		break;
+	case e1000_fc_rx_pause:
+		ctrl &= (~E1000_CTRL_TFCE);
+		ctrl |= E1000_CTRL_RFCE;
+		break;
+	case e1000_fc_tx_pause:
+		ctrl &= (~E1000_CTRL_RFCE);
+		ctrl |= E1000_CTRL_TFCE;
+		break;
+	case e1000_fc_full:
+		ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+		break;
+	default:
+		e_dbg("Flow control param set incorrectly\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	ew32(CTRL, ctrl);
+
+	return 0;
+}
+
+/**
+ *  e1000e_config_fc_after_link_up - Configures flow control after link
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks the status of auto-negotiation after link up to ensure that the
+ *  speed and duplex were not forced.  If the link needed to be forced, then
+ *  flow control needs to be forced also.  If auto-negotiation is enabled
+ *  and did not fail, then we configure flow control based on our link
+ *  partner.
+ **/
+s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val = 0;
+	u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg;
+	u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
+	u16 speed, duplex;
+
+	/* Check for the case where we have fiber media and auto-neg failed
+	 * so we had to force link.  In this case, we need to force the
+	 * configuration of the MAC to match the "fc" parameter.
+	 */
+	if (mac->autoneg_failed) {
+		if (hw->phy.media_type == e1000_media_type_fiber ||
+		    hw->phy.media_type == e1000_media_type_internal_serdes)
+			ret_val = e1000e_force_mac_fc(hw);
+	} else {
+		if (hw->phy.media_type == e1000_media_type_copper)
+			ret_val = e1000e_force_mac_fc(hw);
+	}
+
+	if (ret_val) {
+		e_dbg("Error forcing flow control settings\n");
+		return ret_val;
+	}
+
+	/* Check for the case where we have copper media and auto-neg is
+	 * enabled.  In this case, we need to check and see if Auto-Neg
+	 * has completed, and if so, how the PHY and link partner has
+	 * flow control configured.
+	 */
+	if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
+		/* Read the MII Status Register and check to see if AutoNeg
+		 * has completed.  We read this twice because this reg has
+		 * some "sticky" (latched) bits.
+		 */
+		ret_val = e1e_rphy(hw, MII_BMSR, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1e_rphy(hw, MII_BMSR, &mii_status_reg);
+		if (ret_val)
+			return ret_val;
+
+		if (!(mii_status_reg & BMSR_ANEGCOMPLETE)) {
+			e_dbg("Copper PHY and Auto Neg has not completed.\n");
+			return ret_val;
+		}
+
+		/* The AutoNeg process has completed, so we now need to
+		 * read both the Auto Negotiation Advertisement
+		 * Register (Address 4) and the Auto_Negotiation Base
+		 * Page Ability Register (Address 5) to determine how
+		 * flow control was negotiated.
+		 */
+		ret_val = e1e_rphy(hw, MII_ADVERTISE, &mii_nway_adv_reg);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1e_rphy(hw, MII_LPA, &mii_nway_lp_ability_reg);
+		if (ret_val)
+			return ret_val;
+
+		/* Two bits in the Auto Negotiation Advertisement Register
+		 * (Address 4) and two bits in the Auto Negotiation Base
+		 * Page Ability Register (Address 5) determine flow control
+		 * for both the PHY and the link partner.  The following
+		 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+		 * 1999, describes these PAUSE resolution bits and how flow
+		 * control is determined based upon these settings.
+		 * NOTE:  DC = Don't Care
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    0    |  DC   |   DC    | e1000_fc_none
+		 *   0   |    1    |   0   |   DC    | e1000_fc_none
+		 *   0   |    1    |   1   |    0    | e1000_fc_none
+		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
+		 *   1   |    0    |   0   |   DC    | e1000_fc_none
+		 *   1   |   DC    |   1   |   DC    | e1000_fc_full
+		 *   1   |    1    |   0   |    0    | e1000_fc_none
+		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
+		 *
+		 * Are both PAUSE bits set to 1?  If so, this implies
+		 * Symmetric Flow Control is enabled at both ends.  The
+		 * ASM_DIR bits are irrelevant per the spec.
+		 *
+		 * For Symmetric Flow Control:
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |   DC    |   1   |   DC    | E1000_fc_full
+		 *
+		 */
+		if ((mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) &&
+		    (mii_nway_lp_ability_reg & LPA_PAUSE_CAP)) {
+			/* Now we need to check if the user selected Rx ONLY
+			 * of pause frames.  In this case, we had to advertise
+			 * FULL flow control because we could not advertise Rx
+			 * ONLY. Hence, we must now check to see if we need to
+			 * turn OFF the TRANSMISSION of PAUSE frames.
+			 */
+			if (hw->fc.requested_mode == e1000_fc_full) {
+				hw->fc.current_mode = e1000_fc_full;
+				e_dbg("Flow Control = FULL.\n");
+			} else {
+				hw->fc.current_mode = e1000_fc_rx_pause;
+				e_dbg("Flow Control = Rx PAUSE frames only.\n");
+			}
+		}
+		/* For receiving PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
+		 */
+		else if (!(mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) &&
+			 (mii_nway_adv_reg & ADVERTISE_PAUSE_ASYM) &&
+			 (mii_nway_lp_ability_reg & LPA_PAUSE_CAP) &&
+			 (mii_nway_lp_ability_reg & LPA_PAUSE_ASYM)) {
+			hw->fc.current_mode = e1000_fc_tx_pause;
+			e_dbg("Flow Control = Tx PAUSE frames only.\n");
+		}
+		/* For transmitting PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
+		 */
+		else if ((mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) &&
+			 (mii_nway_adv_reg & ADVERTISE_PAUSE_ASYM) &&
+			 !(mii_nway_lp_ability_reg & LPA_PAUSE_CAP) &&
+			 (mii_nway_lp_ability_reg & LPA_PAUSE_ASYM)) {
+			hw->fc.current_mode = e1000_fc_rx_pause;
+			e_dbg("Flow Control = Rx PAUSE frames only.\n");
+		} else {
+			/* Per the IEEE spec, at this point flow control
+			 * should be disabled.
+			 */
+			hw->fc.current_mode = e1000_fc_none;
+			e_dbg("Flow Control = NONE.\n");
+		}
+
+		/* Now we need to do one last check...  If we auto-
+		 * negotiated to HALF DUPLEX, flow control should not be
+		 * enabled per IEEE 802.3 spec.
+		 */
+		ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
+		if (ret_val) {
+			e_dbg("Error getting link speed and duplex\n");
+			return ret_val;
+		}
+
+		if (duplex == HALF_DUPLEX)
+			hw->fc.current_mode = e1000_fc_none;
+
+		/* Now we call a subroutine to actually force the MAC
+		 * controller to use the correct flow control settings.
+		 */
+		ret_val = e1000e_force_mac_fc(hw);
+		if (ret_val) {
+			e_dbg("Error forcing flow control settings\n");
+			return ret_val;
+		}
+	}
+
+	/* Check for the case where we have SerDes media and auto-neg is
+	 * enabled.  In this case, we need to check and see if Auto-Neg
+	 * has completed, and if so, how the PHY and link partner has
+	 * flow control configured.
+	 */
+	if ((hw->phy.media_type == e1000_media_type_internal_serdes) &&
+	    mac->autoneg) {
+		/* Read the PCS_LSTS and check to see if AutoNeg
+		 * has completed.
+		 */
+		pcs_status_reg = er32(PCS_LSTAT);
+
+		if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) {
+			e_dbg("PCS Auto Neg has not completed.\n");
+			return ret_val;
+		}
+
+		/* The AutoNeg process has completed, so we now need to
+		 * read both the Auto Negotiation Advertisement
+		 * Register (PCS_ANADV) and the Auto_Negotiation Base
+		 * Page Ability Register (PCS_LPAB) to determine how
+		 * flow control was negotiated.
+		 */
+		pcs_adv_reg = er32(PCS_ANADV);
+		pcs_lp_ability_reg = er32(PCS_LPAB);
+
+		/* Two bits in the Auto Negotiation Advertisement Register
+		 * (PCS_ANADV) and two bits in the Auto Negotiation Base
+		 * Page Ability Register (PCS_LPAB) determine flow control
+		 * for both the PHY and the link partner.  The following
+		 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+		 * 1999, describes these PAUSE resolution bits and how flow
+		 * control is determined based upon these settings.
+		 * NOTE:  DC = Don't Care
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    0    |  DC   |   DC    | e1000_fc_none
+		 *   0   |    1    |   0   |   DC    | e1000_fc_none
+		 *   0   |    1    |   1   |    0    | e1000_fc_none
+		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
+		 *   1   |    0    |   0   |   DC    | e1000_fc_none
+		 *   1   |   DC    |   1   |   DC    | e1000_fc_full
+		 *   1   |    1    |   0   |    0    | e1000_fc_none
+		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
+		 *
+		 * Are both PAUSE bits set to 1?  If so, this implies
+		 * Symmetric Flow Control is enabled at both ends.  The
+		 * ASM_DIR bits are irrelevant per the spec.
+		 *
+		 * For Symmetric Flow Control:
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |   DC    |   1   |   DC    | e1000_fc_full
+		 *
+		 */
+		if ((pcs_adv_reg & E1000_TXCW_PAUSE) &&
+		    (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) {
+			/* Now we need to check if the user selected Rx ONLY
+			 * of pause frames.  In this case, we had to advertise
+			 * FULL flow control because we could not advertise Rx
+			 * ONLY. Hence, we must now check to see if we need to
+			 * turn OFF the TRANSMISSION of PAUSE frames.
+			 */
+			if (hw->fc.requested_mode == e1000_fc_full) {
+				hw->fc.current_mode = e1000_fc_full;
+				e_dbg("Flow Control = FULL.\n");
+			} else {
+				hw->fc.current_mode = e1000_fc_rx_pause;
+				e_dbg("Flow Control = Rx PAUSE frames only.\n");
+			}
+		}
+		/* For receiving PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
+		 */
+		else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) &&
+			 (pcs_adv_reg & E1000_TXCW_ASM_DIR) &&
+			 (pcs_lp_ability_reg & E1000_TXCW_PAUSE) &&
+			 (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) {
+			hw->fc.current_mode = e1000_fc_tx_pause;
+			e_dbg("Flow Control = Tx PAUSE frames only.\n");
+		}
+		/* For transmitting PAUSE frames ONLY.
+		 *
+		 *   LOCAL DEVICE  |   LINK PARTNER
+		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+		 *-------|---------|-------|---------|--------------------
+		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
+		 */
+		else if ((pcs_adv_reg & E1000_TXCW_PAUSE) &&
+			 (pcs_adv_reg & E1000_TXCW_ASM_DIR) &&
+			 !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) &&
+			 (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) {
+			hw->fc.current_mode = e1000_fc_rx_pause;
+			e_dbg("Flow Control = Rx PAUSE frames only.\n");
+		} else {
+			/* Per the IEEE spec, at this point flow control
+			 * should be disabled.
+			 */
+			hw->fc.current_mode = e1000_fc_none;
+			e_dbg("Flow Control = NONE.\n");
+		}
+
+		/* Now we call a subroutine to actually force the MAC
+		 * controller to use the correct flow control settings.
+		 */
+		pcs_ctrl_reg = er32(PCS_LCTL);
+		pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+		ew32(PCS_LCTL, pcs_ctrl_reg);
+
+		ret_val = e1000e_force_mac_fc(hw);
+		if (ret_val) {
+			e_dbg("Error forcing flow control settings\n");
+			return ret_val;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: stores the current speed
+ *  @duplex: stores the current duplex
+ *
+ *  Read the status register for the current speed/duplex and store the current
+ *  speed and duplex for copper connections.
+ **/
+s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+				       u16 *duplex)
+{
+	u32 status;
+
+	status = er32(STATUS);
+	if (status & E1000_STATUS_SPEED_1000)
+		*speed = SPEED_1000;
+	else if (status & E1000_STATUS_SPEED_100)
+		*speed = SPEED_100;
+	else
+		*speed = SPEED_10;
+
+	if (status & E1000_STATUS_FD)
+		*duplex = FULL_DUPLEX;
+	else
+		*duplex = HALF_DUPLEX;
+
+	e_dbg("%u Mbps, %s Duplex\n",
+	      *speed == SPEED_1000 ? 1000 : *speed == SPEED_100 ? 100 : 10,
+	      *duplex == FULL_DUPLEX ? "Full" : "Half");
+
+	return 0;
+}
+
+/**
+ *  e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @speed: stores the current speed
+ *  @duplex: stores the current duplex
+ *
+ *  Sets the speed and duplex to gigabit full duplex (the only possible option)
+ *  for fiber/serdes links.
+ **/
+s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw __always_unused
+					     *hw, u16 *speed, u16 *duplex)
+{
+	*speed = SPEED_1000;
+	*duplex = FULL_DUPLEX;
+
+	return 0;
+}
+
+/**
+ *  e1000e_get_hw_semaphore - Acquire hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the HW semaphore to access the PHY or NVM
+ **/
+s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
+{
+	u32 swsm;
+	s32 timeout = hw->nvm.word_size + 1;
+	s32 i = 0;
+
+	/* Get the SW semaphore */
+	while (i < timeout) {
+		swsm = er32(SWSM);
+		if (!(swsm & E1000_SWSM_SMBI))
+			break;
+
+		usleep_range(50, 100);
+		i++;
+	}
+
+	if (i == timeout) {
+		e_dbg("Driver can't access device - SMBI bit is set.\n");
+		return -E1000_ERR_NVM;
+	}
+
+	/* Get the FW semaphore. */
+	for (i = 0; i < timeout; i++) {
+		swsm = er32(SWSM);
+		ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
+
+		/* Semaphore acquired if bit latched */
+		if (er32(SWSM) & E1000_SWSM_SWESMBI)
+			break;
+
+		usleep_range(50, 100);
+	}
+
+	if (i == timeout) {
+		/* Release semaphores */
+		e1000e_put_hw_semaphore(hw);
+		e_dbg("Driver can't access the NVM\n");
+		return -E1000_ERR_NVM;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_put_hw_semaphore - Release hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Release hardware semaphore used to access the PHY or NVM
+ **/
+void e1000e_put_hw_semaphore(struct e1000_hw *hw)
+{
+	u32 swsm;
+
+	swsm = er32(SWSM);
+	swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+	ew32(SWSM, swsm);
+}
+
+/**
+ *  e1000e_get_auto_rd_done - Check for auto read completion
+ *  @hw: pointer to the HW structure
+ *
+ *  Check EEPROM for Auto Read done bit.
+ **/
+s32 e1000e_get_auto_rd_done(struct e1000_hw *hw)
+{
+	s32 i = 0;
+
+	while (i < AUTO_READ_DONE_TIMEOUT) {
+		if (er32(EECD) & E1000_EECD_AUTO_RD)
+			break;
+		usleep_range(1000, 2000);
+		i++;
+	}
+
+	if (i == AUTO_READ_DONE_TIMEOUT) {
+		e_dbg("Auto read by HW from NVM has not completed.\n");
+		return -E1000_ERR_RESET;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_valid_led_default - Verify a valid default LED config
+ *  @hw: pointer to the HW structure
+ *  @data: pointer to the NVM (EEPROM)
+ *
+ *  Read the EEPROM for the current default LED configuration.  If the
+ *  LED configuration is not valid, set to a valid LED configuration.
+ **/
+s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data)
+{
+	s32 ret_val;
+
+	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
+		*data = ID_LED_DEFAULT;
+
+	return 0;
+}
+
+/**
+ *  e1000e_id_led_init_generic -
+ *  @hw: pointer to the HW structure
+ *
+ **/
+s32 e1000e_id_led_init_generic(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	const u32 ledctl_mask = 0x000000FF;
+	const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+	const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+	u16 data, i, temp;
+	const u16 led_mask = 0x0F;
+
+	ret_val = hw->nvm.ops.valid_led_default(hw, &data);
+	if (ret_val)
+		return ret_val;
+
+	mac->ledctl_default = er32(LEDCTL);
+	mac->ledctl_mode1 = mac->ledctl_default;
+	mac->ledctl_mode2 = mac->ledctl_default;
+
+	for (i = 0; i < 4; i++) {
+		temp = (data >> (i << 2)) & led_mask;
+		switch (temp) {
+		case ID_LED_ON1_DEF2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_ON1_OFF2:
+			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode1 |= ledctl_on << (i << 3);
+			break;
+		case ID_LED_OFF1_DEF2:
+		case ID_LED_OFF1_ON2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode1 |= ledctl_off << (i << 3);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+		switch (temp) {
+		case ID_LED_DEF1_ON2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_OFF1_ON2:
+			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode2 |= ledctl_on << (i << 3);
+			break;
+		case ID_LED_DEF1_OFF2:
+		case ID_LED_ON1_OFF2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+			mac->ledctl_mode2 |= ledctl_off << (i << 3);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_setup_led_generic - Configures SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This prepares the SW controllable LED for use and saves the current state
+ *  of the LED so it can be later restored.
+ **/
+s32 e1000e_setup_led_generic(struct e1000_hw *hw)
+{
+	u32 ledctl;
+
+	if (hw->mac.ops.setup_led != e1000e_setup_led_generic)
+		return -E1000_ERR_CONFIG;
+
+	if (hw->phy.media_type == e1000_media_type_fiber) {
+		ledctl = er32(LEDCTL);
+		hw->mac.ledctl_default = ledctl;
+		/* Turn off LED0 */
+		ledctl &= ~(E1000_LEDCTL_LED0_IVRT | E1000_LEDCTL_LED0_BLINK |
+			    E1000_LEDCTL_LED0_MODE_MASK);
+		ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+			   E1000_LEDCTL_LED0_MODE_SHIFT);
+		ew32(LEDCTL, ledctl);
+	} else if (hw->phy.media_type == e1000_media_type_copper) {
+		ew32(LEDCTL, hw->mac.ledctl_mode1);
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_cleanup_led_generic - Set LED config to default operation
+ *  @hw: pointer to the HW structure
+ *
+ *  Remove the current LED configuration and set the LED configuration
+ *  to the default value, saved from the EEPROM.
+ **/
+s32 e1000e_cleanup_led_generic(struct e1000_hw *hw)
+{
+	ew32(LEDCTL, hw->mac.ledctl_default);
+	return 0;
+}
+
+/**
+ *  e1000e_blink_led_generic - Blink LED
+ *  @hw: pointer to the HW structure
+ *
+ *  Blink the LEDs which are set to be on.
+ **/
+s32 e1000e_blink_led_generic(struct e1000_hw *hw)
+{
+	u32 ledctl_blink = 0;
+	u32 i;
+
+	if (hw->phy.media_type == e1000_media_type_fiber) {
+		/* always blink LED0 for PCI-E fiber */
+		ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+		    (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+	} else {
+		/* Set the blink bit for each LED that's "on" (0x0E)
+		 * (or "off" if inverted) in ledctl_mode2.  The blink
+		 * logic in hardware only works when mode is set to "on"
+		 * so it must be changed accordingly when the mode is
+		 * "off" and inverted.
+		 */
+		ledctl_blink = hw->mac.ledctl_mode2;
+		for (i = 0; i < 32; i += 8) {
+			u32 mode = (hw->mac.ledctl_mode2 >> i) &
+			    E1000_LEDCTL_LED0_MODE_MASK;
+			u32 led_default = hw->mac.ledctl_default >> i;
+
+			if ((!(led_default & E1000_LEDCTL_LED0_IVRT) &&
+			     (mode == E1000_LEDCTL_MODE_LED_ON)) ||
+			    ((led_default & E1000_LEDCTL_LED0_IVRT) &&
+			     (mode == E1000_LEDCTL_MODE_LED_OFF))) {
+				ledctl_blink &=
+				    ~(E1000_LEDCTL_LED0_MODE_MASK << i);
+				ledctl_blink |= (E1000_LEDCTL_LED0_BLINK |
+						 E1000_LEDCTL_MODE_LED_ON) << i;
+			}
+		}
+	}
+
+	ew32(LEDCTL, ledctl_blink);
+
+	return 0;
+}
+
+/**
+ *  e1000e_led_on_generic - Turn LED on
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn LED on.
+ **/
+s32 e1000e_led_on_generic(struct e1000_hw *hw)
+{
+	u32 ctrl;
+
+	switch (hw->phy.media_type) {
+	case e1000_media_type_fiber:
+		ctrl = er32(CTRL);
+		ctrl &= ~E1000_CTRL_SWDPIN0;
+		ctrl |= E1000_CTRL_SWDPIO0;
+		ew32(CTRL, ctrl);
+		break;
+	case e1000_media_type_copper:
+		ew32(LEDCTL, hw->mac.ledctl_mode2);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_led_off_generic - Turn LED off
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn LED off.
+ **/
+s32 e1000e_led_off_generic(struct e1000_hw *hw)
+{
+	u32 ctrl;
+
+	switch (hw->phy.media_type) {
+	case e1000_media_type_fiber:
+		ctrl = er32(CTRL);
+		ctrl |= E1000_CTRL_SWDPIN0;
+		ctrl |= E1000_CTRL_SWDPIO0;
+		ew32(CTRL, ctrl);
+		break;
+	case e1000_media_type_copper:
+		ew32(LEDCTL, hw->mac.ledctl_mode1);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_set_pcie_no_snoop - Set PCI-express capabilities
+ *  @hw: pointer to the HW structure
+ *  @no_snoop: bitmap of snoop events
+ *
+ *  Set the PCI-express register to snoop for events enabled in 'no_snoop'.
+ **/
+void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop)
+{
+	u32 gcr;
+
+	if (no_snoop) {
+		gcr = er32(GCR);
+		gcr &= ~(PCIE_NO_SNOOP_ALL);
+		gcr |= no_snoop;
+		ew32(GCR, gcr);
+	}
+}
+
+/**
+ *  e1000e_disable_pcie_master - Disables PCI-express master access
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns 0 if successful, else returns -10
+ *  (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
+ *  the master requests to be disabled.
+ *
+ *  Disables PCI-Express master access and verifies there are no pending
+ *  requests.
+ **/
+s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 timeout = MASTER_DISABLE_TIMEOUT;
+
+	ctrl = er32(CTRL);
+	ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
+	ew32(CTRL, ctrl);
+
+	while (timeout) {
+		if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
+			break;
+		usleep_range(100, 200);
+		timeout--;
+	}
+
+	if (!timeout) {
+		e_dbg("Master requests are pending.\n");
+		return -E1000_ERR_MASTER_REQUESTS_PENDING;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_reset_adaptive - Reset Adaptive Interframe Spacing
+ *  @hw: pointer to the HW structure
+ *
+ *  Reset the Adaptive Interframe Spacing throttle to default values.
+ **/
+void e1000e_reset_adaptive(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+
+	if (!mac->adaptive_ifs) {
+		e_dbg("Not in Adaptive IFS mode!\n");
+		return;
+	}
+
+	mac->current_ifs_val = 0;
+	mac->ifs_min_val = IFS_MIN;
+	mac->ifs_max_val = IFS_MAX;
+	mac->ifs_step_size = IFS_STEP;
+	mac->ifs_ratio = IFS_RATIO;
+
+	mac->in_ifs_mode = false;
+	ew32(AIT, 0);
+}
+
+/**
+ *  e1000e_update_adaptive - Update Adaptive Interframe Spacing
+ *  @hw: pointer to the HW structure
+ *
+ *  Update the Adaptive Interframe Spacing Throttle value based on the
+ *  time between transmitted packets and time between collisions.
+ **/
+void e1000e_update_adaptive(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+
+	if (!mac->adaptive_ifs) {
+		e_dbg("Not in Adaptive IFS mode!\n");
+		return;
+	}
+
+	if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
+		if (mac->tx_packet_delta > MIN_NUM_XMITS) {
+			mac->in_ifs_mode = true;
+			if (mac->current_ifs_val < mac->ifs_max_val) {
+				if (!mac->current_ifs_val)
+					mac->current_ifs_val = mac->ifs_min_val;
+				else
+					mac->current_ifs_val +=
+					    mac->ifs_step_size;
+				ew32(AIT, mac->current_ifs_val);
+			}
+		}
+	} else {
+		if (mac->in_ifs_mode &&
+		    (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
+			mac->current_ifs_val = 0;
+			mac->in_ifs_mode = false;
+			ew32(AIT, 0);
+		}
+	}
+}
diff --git a/drivers/net/ethernet/intel/e1000e/mac.h b/drivers/net/ethernet/intel/e1000e/mac.h
new file mode 100644
index 000000000..0513d90cd
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/mac.h
@@ -0,0 +1,68 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000E_MAC_H_
+#define _E1000E_MAC_H_
+
+s32 e1000e_blink_led_generic(struct e1000_hw *hw);
+s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
+s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
+s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
+s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
+s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
+s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
+s32 e1000e_force_mac_fc(struct e1000_hw *hw);
+s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
+s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
+void e1000_set_lan_id_single_port(struct e1000_hw *hw);
+s32 e1000e_get_hw_semaphore(struct e1000_hw *hw);
+s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+				       u16 *duplex);
+s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw,
+					     u16 *speed, u16 *duplex);
+s32 e1000e_id_led_init_generic(struct e1000_hw *hw);
+s32 e1000e_led_on_generic(struct e1000_hw *hw);
+s32 e1000e_led_off_generic(struct e1000_hw *hw);
+void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
+					u8 *mc_addr_list, u32 mc_addr_count);
+s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
+s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw);
+s32 e1000e_setup_led_generic(struct e1000_hw *hw);
+s32 e1000e_setup_link_generic(struct e1000_hw *hw);
+s32 e1000e_validate_mdi_setting_generic(struct e1000_hw *hw);
+s32 e1000e_validate_mdi_setting_crossover_generic(struct e1000_hw *hw);
+
+void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw);
+void e1000_clear_vfta_generic(struct e1000_hw *hw);
+void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+void e1000e_put_hw_semaphore(struct e1000_hw *hw);
+s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
+void e1000e_reset_adaptive(struct e1000_hw *hw);
+void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
+void e1000e_update_adaptive(struct e1000_hw *hw);
+void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
+
+void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
+u32 e1000e_rar_get_count_generic(struct e1000_hw *hw);
+int e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index);
+void e1000e_config_collision_dist_generic(struct e1000_hw *hw);
+
+#endif
diff --git a/drivers/net/ethernet/intel/e1000e/manage.c b/drivers/net/ethernet/intel/e1000e/manage.c
new file mode 100644
index 000000000..06edfca1a
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/manage.c
@@ -0,0 +1,347 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include "e1000.h"
+
+/**
+ *  e1000_calculate_checksum - Calculate checksum for buffer
+ *  @buffer: pointer to EEPROM
+ *  @length: size of EEPROM to calculate a checksum for
+ *
+ *  Calculates the checksum for some buffer on a specified length.  The
+ *  checksum calculated is returned.
+ **/
+static u8 e1000_calculate_checksum(u8 *buffer, u32 length)
+{
+	u32 i;
+	u8 sum = 0;
+
+	if (!buffer)
+		return 0;
+
+	for (i = 0; i < length; i++)
+		sum += buffer[i];
+
+	return (u8)(0 - sum);
+}
+
+/**
+ *  e1000_mng_enable_host_if - Checks host interface is enabled
+ *  @hw: pointer to the HW structure
+ *
+ *  Returns 0 upon success, else -E1000_ERR_HOST_INTERFACE_COMMAND
+ *
+ *  This function checks whether the HOST IF is enabled for command operation
+ *  and also checks whether the previous command is completed.  It busy waits
+ *  in case of previous command is not completed.
+ **/
+static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
+{
+	u32 hicr;
+	u8 i;
+
+	if (!hw->mac.arc_subsystem_valid) {
+		e_dbg("ARC subsystem not valid.\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Check that the host interface is enabled. */
+	hicr = er32(HICR);
+	if (!(hicr & E1000_HICR_EN)) {
+		e_dbg("E1000_HOST_EN bit disabled.\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+	/* check the previous command is completed */
+	for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
+		hicr = er32(HICR);
+		if (!(hicr & E1000_HICR_C))
+			break;
+		mdelay(1);
+	}
+
+	if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
+		e_dbg("Previous command timeout failed.\n");
+		return -E1000_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_check_mng_mode_generic - Generic check management mode
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the firmware semaphore register and returns true (>0) if
+ *  manageability is enabled, else false (0).
+ **/
+bool e1000e_check_mng_mode_generic(struct e1000_hw *hw)
+{
+	u32 fwsm = er32(FWSM);
+
+	return (fwsm & E1000_FWSM_MODE_MASK) ==
+	    (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
+}
+
+/**
+ *  e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx
+ *  @hw: pointer to the HW structure
+ *
+ *  Enables packet filtering on transmit packets if manageability is enabled
+ *  and host interface is enabled.
+ **/
+bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
+{
+	struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
+	u32 *buffer = (u32 *)&hw->mng_cookie;
+	u32 offset;
+	s32 ret_val, hdr_csum, csum;
+	u8 i, len;
+
+	hw->mac.tx_pkt_filtering = true;
+
+	/* No manageability, no filtering */
+	if (!hw->mac.ops.check_mng_mode(hw)) {
+		hw->mac.tx_pkt_filtering = false;
+		return hw->mac.tx_pkt_filtering;
+	}
+
+	/* If we can't read from the host interface for whatever
+	 * reason, disable filtering.
+	 */
+	ret_val = e1000_mng_enable_host_if(hw);
+	if (ret_val) {
+		hw->mac.tx_pkt_filtering = false;
+		return hw->mac.tx_pkt_filtering;
+	}
+
+	/* Read in the header.  Length and offset are in dwords. */
+	len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
+	offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
+	for (i = 0; i < len; i++)
+		*(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF,
+						     offset + i);
+	hdr_csum = hdr->checksum;
+	hdr->checksum = 0;
+	csum = e1000_calculate_checksum((u8 *)hdr,
+					E1000_MNG_DHCP_COOKIE_LENGTH);
+	/* If either the checksums or signature don't match, then
+	 * the cookie area isn't considered valid, in which case we
+	 * take the safe route of assuming Tx filtering is enabled.
+	 */
+	if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
+		hw->mac.tx_pkt_filtering = true;
+		return hw->mac.tx_pkt_filtering;
+	}
+
+	/* Cookie area is valid, make the final check for filtering. */
+	if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING))
+		hw->mac.tx_pkt_filtering = false;
+
+	return hw->mac.tx_pkt_filtering;
+}
+
+/**
+ *  e1000_mng_write_cmd_header - Writes manageability command header
+ *  @hw: pointer to the HW structure
+ *  @hdr: pointer to the host interface command header
+ *
+ *  Writes the command header after does the checksum calculation.
+ **/
+static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
+				      struct e1000_host_mng_command_header *hdr)
+{
+	u16 i, length = sizeof(struct e1000_host_mng_command_header);
+
+	/* Write the whole command header structure with new checksum. */
+
+	hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
+
+	length >>= 2;
+	/* Write the relevant command block into the ram area. */
+	for (i = 0; i < length; i++) {
+		E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i, *((u32 *)hdr + i));
+		e1e_flush();
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_mng_host_if_write - Write to the manageability host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: pointer to the host interface buffer
+ *  @length: size of the buffer
+ *  @offset: location in the buffer to write to
+ *  @sum: sum of the data (not checksum)
+ *
+ *  This function writes the buffer content at the offset given on the host if.
+ *  It also does alignment considerations to do the writes in most efficient
+ *  way.  Also fills up the sum of the buffer in *buffer parameter.
+ **/
+static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
+				   u16 length, u16 offset, u8 *sum)
+{
+	u8 *tmp;
+	u8 *bufptr = buffer;
+	u32 data = 0;
+	u16 remaining, i, j, prev_bytes;
+
+	/* sum = only sum of the data and it is not checksum */
+
+	if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH)
+		return -E1000_ERR_PARAM;
+
+	tmp = (u8 *)&data;
+	prev_bytes = offset & 0x3;
+	offset >>= 2;
+
+	if (prev_bytes) {
+		data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset);
+		for (j = prev_bytes; j < sizeof(u32); j++) {
+			*(tmp + j) = *bufptr++;
+			*sum += *(tmp + j);
+		}
+		E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data);
+		length -= j - prev_bytes;
+		offset++;
+	}
+
+	remaining = length & 0x3;
+	length -= remaining;
+
+	/* Calculate length in DWORDs */
+	length >>= 2;
+
+	/* The device driver writes the relevant command block into the
+	 * ram area.
+	 */
+	for (i = 0; i < length; i++) {
+		for (j = 0; j < sizeof(u32); j++) {
+			*(tmp + j) = *bufptr++;
+			*sum += *(tmp + j);
+		}
+
+		E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
+	}
+	if (remaining) {
+		for (j = 0; j < sizeof(u32); j++) {
+			if (j < remaining)
+				*(tmp + j) = *bufptr++;
+			else
+				*(tmp + j) = 0;
+
+			*sum += *(tmp + j);
+		}
+		E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_mng_write_dhcp_info - Writes DHCP info to host interface
+ *  @hw: pointer to the HW structure
+ *  @buffer: pointer to the host interface
+ *  @length: size of the buffer
+ *
+ *  Writes the DHCP information to the host interface.
+ **/
+s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
+{
+	struct e1000_host_mng_command_header hdr;
+	s32 ret_val;
+	u32 hicr;
+
+	hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
+	hdr.command_length = length;
+	hdr.reserved1 = 0;
+	hdr.reserved2 = 0;
+	hdr.checksum = 0;
+
+	/* Enable the host interface */
+	ret_val = e1000_mng_enable_host_if(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Populate the host interface with the contents of "buffer". */
+	ret_val = e1000_mng_host_if_write(hw, buffer, length,
+					  sizeof(hdr), &(hdr.checksum));
+	if (ret_val)
+		return ret_val;
+
+	/* Write the manageability command header */
+	ret_val = e1000_mng_write_cmd_header(hw, &hdr);
+	if (ret_val)
+		return ret_val;
+
+	/* Tell the ARC a new command is pending. */
+	hicr = er32(HICR);
+	ew32(HICR, hicr | E1000_HICR_C);
+
+	return 0;
+}
+
+/**
+ *  e1000e_enable_mng_pass_thru - Check if management passthrough is needed
+ *  @hw: pointer to the HW structure
+ *
+ *  Verifies the hardware needs to leave interface enabled so that frames can
+ *  be directed to and from the management interface.
+ **/
+bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+	u32 manc;
+	u32 fwsm, factps;
+
+	manc = er32(MANC);
+
+	if (!(manc & E1000_MANC_RCV_TCO_EN))
+		return false;
+
+	if (hw->mac.has_fwsm) {
+		fwsm = er32(FWSM);
+		factps = er32(FACTPS);
+
+		if (!(factps & E1000_FACTPS_MNGCG) &&
+		    ((fwsm & E1000_FWSM_MODE_MASK) ==
+		     (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)))
+			return true;
+	} else if ((hw->mac.type == e1000_82574) ||
+		   (hw->mac.type == e1000_82583)) {
+		u16 data;
+		s32 ret_val;
+
+		factps = er32(FACTPS);
+		ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+		if (ret_val)
+			return false;
+
+		if (!(factps & E1000_FACTPS_MNGCG) &&
+		    ((data & E1000_NVM_INIT_CTRL2_MNGM) ==
+		     (e1000_mng_mode_pt << 13)))
+			return true;
+	} else if ((manc & E1000_MANC_SMBUS_EN) &&
+		   !(manc & E1000_MANC_ASF_EN)) {
+		return true;
+	}
+
+	return false;
+}
diff --git a/drivers/net/ethernet/intel/e1000e/manage.h b/drivers/net/ethernet/intel/e1000e/manage.h
new file mode 100644
index 000000000..a8c27f98f
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/manage.h
@@ -0,0 +1,65 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000E_MANAGE_H_
+#define _E1000E_MANAGE_H_
+
+bool e1000e_check_mng_mode_generic(struct e1000_hw *hw);
+bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
+s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
+bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw);
+
+enum e1000_mng_mode {
+	e1000_mng_mode_none = 0,
+	e1000_mng_mode_asf,
+	e1000_mng_mode_pt,
+	e1000_mng_mode_ipmi,
+	e1000_mng_mode_host_if_only
+};
+
+#define E1000_FACTPS_MNGCG			0x20000000
+
+#define E1000_FWSM_MODE_MASK			0xE
+#define E1000_FWSM_MODE_SHIFT			1
+
+#define E1000_MNG_IAMT_MODE			0x3
+#define E1000_MNG_DHCP_COOKIE_LENGTH		0x10
+#define E1000_MNG_DHCP_COOKIE_OFFSET		0x6F0
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT		10
+#define E1000_MNG_DHCP_TX_PAYLOAD_CMD		64
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING	0x1
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN	0x2
+
+#define E1000_VFTA_ENTRY_SHIFT			5
+#define E1000_VFTA_ENTRY_MASK			0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK		0x1F
+
+#define E1000_HICR_EN			0x01	/* Enable bit - RO */
+/* Driver sets this bit when done to put command in RAM */
+#define E1000_HICR_C			0x02
+#define E1000_HICR_SV			0x04	/* Status Validity */
+#define E1000_HICR_FW_RESET_ENABLE	0x40
+#define E1000_HICR_FW_RESET		0x80
+
+/* Intel(R) Active Management Technology signature */
+#define E1000_IAMT_SIGNATURE		0x544D4149
+
+#endif
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
new file mode 100644
index 000000000..68913d103
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -0,0 +1,7314 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/tcp.h>
+#include <linux/ipv6.h>
+#include <linux/slab.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/pm_qos.h>
+#include <linux/pm_runtime.h>
+#include <linux/aer.h>
+#include <linux/prefetch.h>
+
+#include "e1000.h"
+
+#define DRV_EXTRAVERSION "-k"
+
+#define DRV_VERSION "2.3.2" DRV_EXTRAVERSION
+char e1000e_driver_name[] = "e1000e";
+const char e1000e_driver_version[] = DRV_VERSION;
+
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+static const struct e1000_info *e1000_info_tbl[] = {
+	[board_82571]		= &e1000_82571_info,
+	[board_82572]		= &e1000_82572_info,
+	[board_82573]		= &e1000_82573_info,
+	[board_82574]		= &e1000_82574_info,
+	[board_82583]		= &e1000_82583_info,
+	[board_80003es2lan]	= &e1000_es2_info,
+	[board_ich8lan]		= &e1000_ich8_info,
+	[board_ich9lan]		= &e1000_ich9_info,
+	[board_ich10lan]	= &e1000_ich10_info,
+	[board_pchlan]		= &e1000_pch_info,
+	[board_pch2lan]		= &e1000_pch2_info,
+	[board_pch_lpt]		= &e1000_pch_lpt_info,
+	[board_pch_spt]		= &e1000_pch_spt_info,
+};
+
+struct e1000_reg_info {
+	u32 ofs;
+	char *name;
+};
+
+static const struct e1000_reg_info e1000_reg_info_tbl[] = {
+	/* General Registers */
+	{E1000_CTRL, "CTRL"},
+	{E1000_STATUS, "STATUS"},
+	{E1000_CTRL_EXT, "CTRL_EXT"},
+
+	/* Interrupt Registers */
+	{E1000_ICR, "ICR"},
+
+	/* Rx Registers */
+	{E1000_RCTL, "RCTL"},
+	{E1000_RDLEN(0), "RDLEN"},
+	{E1000_RDH(0), "RDH"},
+	{E1000_RDT(0), "RDT"},
+	{E1000_RDTR, "RDTR"},
+	{E1000_RXDCTL(0), "RXDCTL"},
+	{E1000_ERT, "ERT"},
+	{E1000_RDBAL(0), "RDBAL"},
+	{E1000_RDBAH(0), "RDBAH"},
+	{E1000_RDFH, "RDFH"},
+	{E1000_RDFT, "RDFT"},
+	{E1000_RDFHS, "RDFHS"},
+	{E1000_RDFTS, "RDFTS"},
+	{E1000_RDFPC, "RDFPC"},
+
+	/* Tx Registers */
+	{E1000_TCTL, "TCTL"},
+	{E1000_TDBAL(0), "TDBAL"},
+	{E1000_TDBAH(0), "TDBAH"},
+	{E1000_TDLEN(0), "TDLEN"},
+	{E1000_TDH(0), "TDH"},
+	{E1000_TDT(0), "TDT"},
+	{E1000_TIDV, "TIDV"},
+	{E1000_TXDCTL(0), "TXDCTL"},
+	{E1000_TADV, "TADV"},
+	{E1000_TARC(0), "TARC"},
+	{E1000_TDFH, "TDFH"},
+	{E1000_TDFT, "TDFT"},
+	{E1000_TDFHS, "TDFHS"},
+	{E1000_TDFTS, "TDFTS"},
+	{E1000_TDFPC, "TDFPC"},
+
+	/* List Terminator */
+	{0, NULL}
+};
+
+/**
+ * __ew32_prepare - prepare to write to MAC CSR register on certain parts
+ * @hw: pointer to the HW structure
+ *
+ * When updating the MAC CSR registers, the Manageability Engine (ME) could
+ * be accessing the registers at the same time.  Normally, this is handled in
+ * h/w by an arbiter but on some parts there is a bug that acknowledges Host
+ * accesses later than it should which could result in the register to have
+ * an incorrect value.  Workaround this by checking the FWSM register which
+ * has bit 24 set while ME is accessing MAC CSR registers, wait if it is set
+ * and try again a number of times.
+ **/
+s32 __ew32_prepare(struct e1000_hw *hw)
+{
+	s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT;
+
+	while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i)
+		udelay(50);
+
+	return i;
+}
+
+void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val)
+{
+	if (hw->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+		__ew32_prepare(hw);
+
+	writel(val, hw->hw_addr + reg);
+}
+
+/**
+ * e1000_regdump - register printout routine
+ * @hw: pointer to the HW structure
+ * @reginfo: pointer to the register info table
+ **/
+static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
+{
+	int n = 0;
+	char rname[16];
+	u32 regs[8];
+
+	switch (reginfo->ofs) {
+	case E1000_RXDCTL(0):
+		for (n = 0; n < 2; n++)
+			regs[n] = __er32(hw, E1000_RXDCTL(n));
+		break;
+	case E1000_TXDCTL(0):
+		for (n = 0; n < 2; n++)
+			regs[n] = __er32(hw, E1000_TXDCTL(n));
+		break;
+	case E1000_TARC(0):
+		for (n = 0; n < 2; n++)
+			regs[n] = __er32(hw, E1000_TARC(n));
+		break;
+	default:
+		pr_info("%-15s %08x\n",
+			reginfo->name, __er32(hw, reginfo->ofs));
+		return;
+	}
+
+	snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]");
+	pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]);
+}
+
+static void e1000e_dump_ps_pages(struct e1000_adapter *adapter,
+				 struct e1000_buffer *bi)
+{
+	int i;
+	struct e1000_ps_page *ps_page;
+
+	for (i = 0; i < adapter->rx_ps_pages; i++) {
+		ps_page = &bi->ps_pages[i];
+
+		if (ps_page->page) {
+			pr_info("packet dump for ps_page %d:\n", i);
+			print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
+				       16, 1, page_address(ps_page->page),
+				       PAGE_SIZE, true);
+		}
+	}
+}
+
+/**
+ * e1000e_dump - Print registers, Tx-ring and Rx-ring
+ * @adapter: board private structure
+ **/
+static void e1000e_dump(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_reg_info *reginfo;
+	struct e1000_ring *tx_ring = adapter->tx_ring;
+	struct e1000_tx_desc *tx_desc;
+	struct my_u0 {
+		__le64 a;
+		__le64 b;
+	} *u0;
+	struct e1000_buffer *buffer_info;
+	struct e1000_ring *rx_ring = adapter->rx_ring;
+	union e1000_rx_desc_packet_split *rx_desc_ps;
+	union e1000_rx_desc_extended *rx_desc;
+	struct my_u1 {
+		__le64 a;
+		__le64 b;
+		__le64 c;
+		__le64 d;
+	} *u1;
+	u32 staterr;
+	int i = 0;
+
+	if (!netif_msg_hw(adapter))
+		return;
+
+	/* Print netdevice Info */
+	if (netdev) {
+		dev_info(&adapter->pdev->dev, "Net device Info\n");
+		pr_info("Device Name     state            trans_start      last_rx\n");
+		pr_info("%-15s %016lX %016lX %016lX\n", netdev->name,
+			netdev->state, netdev->trans_start, netdev->last_rx);
+	}
+
+	/* Print Registers */
+	dev_info(&adapter->pdev->dev, "Register Dump\n");
+	pr_info(" Register Name   Value\n");
+	for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl;
+	     reginfo->name; reginfo++) {
+		e1000_regdump(hw, reginfo);
+	}
+
+	/* Print Tx Ring Summary */
+	if (!netdev || !netif_running(netdev))
+		return;
+
+	dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
+	pr_info("Queue [NTU] [NTC] [bi(ntc)->dma  ] leng ntw timestamp\n");
+	buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
+	pr_info(" %5d %5X %5X %016llX %04X %3X %016llX\n",
+		0, tx_ring->next_to_use, tx_ring->next_to_clean,
+		(unsigned long long)buffer_info->dma,
+		buffer_info->length,
+		buffer_info->next_to_watch,
+		(unsigned long long)buffer_info->time_stamp);
+
+	/* Print Tx Ring */
+	if (!netif_msg_tx_done(adapter))
+		goto rx_ring_summary;
+
+	dev_info(&adapter->pdev->dev, "Tx Ring Dump\n");
+
+	/* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
+	 *
+	 * Legacy Transmit Descriptor
+	 *   +--------------------------------------------------------------+
+	 * 0 |         Buffer Address [63:0] (Reserved on Write Back)       |
+	 *   +--------------------------------------------------------------+
+	 * 8 | Special  |    CSS     | Status |  CMD    |  CSO   |  Length  |
+	 *   +--------------------------------------------------------------+
+	 *   63       48 47        36 35    32 31     24 23    16 15        0
+	 *
+	 * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload
+	 *   63      48 47    40 39       32 31             16 15    8 7      0
+	 *   +----------------------------------------------------------------+
+	 * 0 |  TUCSE  | TUCS0  |   TUCSS   |     IPCSE       | IPCS0 | IPCSS |
+	 *   +----------------------------------------------------------------+
+	 * 8 |   MSS   | HDRLEN | RSV | STA | TUCMD | DTYP |      PAYLEN      |
+	 *   +----------------------------------------------------------------+
+	 *   63      48 47    40 39 36 35 32 31   24 23  20 19                0
+	 *
+	 * Extended Data Descriptor (DTYP=0x1)
+	 *   +----------------------------------------------------------------+
+	 * 0 |                     Buffer Address [63:0]                      |
+	 *   +----------------------------------------------------------------+
+	 * 8 | VLAN tag |  POPTS  | Rsvd | Status | Command | DTYP |  DTALEN  |
+	 *   +----------------------------------------------------------------+
+	 *   63       48 47     40 39  36 35    32 31     24 23  20 19        0
+	 */
+	pr_info("Tl[desc]     [address 63:0  ] [SpeCssSCmCsLen] [bi->dma       ] leng  ntw timestamp        bi->skb <-- Legacy format\n");
+	pr_info("Tc[desc]     [Ce CoCsIpceCoS] [MssHlRSCm0Plen] [bi->dma       ] leng  ntw timestamp        bi->skb <-- Ext Context format\n");
+	pr_info("Td[desc]     [address 63:0  ] [VlaPoRSCm1Dlen] [bi->dma       ] leng  ntw timestamp        bi->skb <-- Ext Data format\n");
+	for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+		const char *next_desc;
+		tx_desc = E1000_TX_DESC(*tx_ring, i);
+		buffer_info = &tx_ring->buffer_info[i];
+		u0 = (struct my_u0 *)tx_desc;
+		if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
+			next_desc = " NTC/U";
+		else if (i == tx_ring->next_to_use)
+			next_desc = " NTU";
+		else if (i == tx_ring->next_to_clean)
+			next_desc = " NTC";
+		else
+			next_desc = "";
+		pr_info("T%c[0x%03X]    %016llX %016llX %016llX %04X  %3X %016llX %p%s\n",
+			(!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
+			 ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')),
+			i,
+			(unsigned long long)le64_to_cpu(u0->a),
+			(unsigned long long)le64_to_cpu(u0->b),
+			(unsigned long long)buffer_info->dma,
+			buffer_info->length, buffer_info->next_to_watch,
+			(unsigned long long)buffer_info->time_stamp,
+			buffer_info->skb, next_desc);
+
+		if (netif_msg_pktdata(adapter) && buffer_info->skb)
+			print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
+				       16, 1, buffer_info->skb->data,
+				       buffer_info->skb->len, true);
+	}
+
+	/* Print Rx Ring Summary */
+rx_ring_summary:
+	dev_info(&adapter->pdev->dev, "Rx Ring Summary\n");
+	pr_info("Queue [NTU] [NTC]\n");
+	pr_info(" %5d %5X %5X\n",
+		0, rx_ring->next_to_use, rx_ring->next_to_clean);
+
+	/* Print Rx Ring */
+	if (!netif_msg_rx_status(adapter))
+		return;
+
+	dev_info(&adapter->pdev->dev, "Rx Ring Dump\n");
+	switch (adapter->rx_ps_pages) {
+	case 1:
+	case 2:
+	case 3:
+		/* [Extended] Packet Split Receive Descriptor Format
+		 *
+		 *    +-----------------------------------------------------+
+		 *  0 |                Buffer Address 0 [63:0]              |
+		 *    +-----------------------------------------------------+
+		 *  8 |                Buffer Address 1 [63:0]              |
+		 *    +-----------------------------------------------------+
+		 * 16 |                Buffer Address 2 [63:0]              |
+		 *    +-----------------------------------------------------+
+		 * 24 |                Buffer Address 3 [63:0]              |
+		 *    +-----------------------------------------------------+
+		 */
+		pr_info("R  [desc]      [buffer 0 63:0 ] [buffer 1 63:0 ] [buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma       ] [bi->skb] <-- Ext Pkt Split format\n");
+		/* [Extended] Receive Descriptor (Write-Back) Format
+		 *
+		 *   63       48 47    32 31     13 12    8 7    4 3        0
+		 *   +------------------------------------------------------+
+		 * 0 | Packet   | IP     |  Rsvd   | MRQ   | Rsvd | MRQ RSS |
+		 *   | Checksum | Ident  |         | Queue |      |  Type   |
+		 *   +------------------------------------------------------+
+		 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+		 *   +------------------------------------------------------+
+		 *   63       48 47    32 31            20 19               0
+		 */
+		pr_info("RWB[desc]      [ck ipid mrqhsh] [vl   l0 ee  es] [ l3  l2  l1 hs] [reserved      ] ---------------- [bi->skb] <-- Ext Rx Write-Back format\n");
+		for (i = 0; i < rx_ring->count; i++) {
+			const char *next_desc;
+			buffer_info = &rx_ring->buffer_info[i];
+			rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i);
+			u1 = (struct my_u1 *)rx_desc_ps;
+			staterr =
+			    le32_to_cpu(rx_desc_ps->wb.middle.status_error);
+
+			if (i == rx_ring->next_to_use)
+				next_desc = " NTU";
+			else if (i == rx_ring->next_to_clean)
+				next_desc = " NTC";
+			else
+				next_desc = "";
+
+			if (staterr & E1000_RXD_STAT_DD) {
+				/* Descriptor Done */
+				pr_info("%s[0x%03X]     %016llX %016llX %016llX %016llX ---------------- %p%s\n",
+					"RWB", i,
+					(unsigned long long)le64_to_cpu(u1->a),
+					(unsigned long long)le64_to_cpu(u1->b),
+					(unsigned long long)le64_to_cpu(u1->c),
+					(unsigned long long)le64_to_cpu(u1->d),
+					buffer_info->skb, next_desc);
+			} else {
+				pr_info("%s[0x%03X]     %016llX %016llX %016llX %016llX %016llX %p%s\n",
+					"R  ", i,
+					(unsigned long long)le64_to_cpu(u1->a),
+					(unsigned long long)le64_to_cpu(u1->b),
+					(unsigned long long)le64_to_cpu(u1->c),
+					(unsigned long long)le64_to_cpu(u1->d),
+					(unsigned long long)buffer_info->dma,
+					buffer_info->skb, next_desc);
+
+				if (netif_msg_pktdata(adapter))
+					e1000e_dump_ps_pages(adapter,
+							     buffer_info);
+			}
+		}
+		break;
+	default:
+	case 0:
+		/* Extended Receive Descriptor (Read) Format
+		 *
+		 *   +-----------------------------------------------------+
+		 * 0 |                Buffer Address [63:0]                |
+		 *   +-----------------------------------------------------+
+		 * 8 |                      Reserved                       |
+		 *   +-----------------------------------------------------+
+		 */
+		pr_info("R  [desc]      [buf addr 63:0 ] [reserved 63:0 ] [bi->dma       ] [bi->skb] <-- Ext (Read) format\n");
+		/* Extended Receive Descriptor (Write-Back) Format
+		 *
+		 *   63       48 47    32 31    24 23            4 3        0
+		 *   +------------------------------------------------------+
+		 *   |     RSS Hash      |        |               |         |
+		 * 0 +-------------------+  Rsvd  |   Reserved    | MRQ RSS |
+		 *   | Packet   | IP     |        |               |  Type   |
+		 *   | Checksum | Ident  |        |               |         |
+		 *   +------------------------------------------------------+
+		 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+		 *   +------------------------------------------------------+
+		 *   63       48 47    32 31            20 19               0
+		 */
+		pr_info("RWB[desc]      [cs ipid    mrq] [vt   ln xe  xs] [bi->skb] <-- Ext (Write-Back) format\n");
+
+		for (i = 0; i < rx_ring->count; i++) {
+			const char *next_desc;
+
+			buffer_info = &rx_ring->buffer_info[i];
+			rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+			u1 = (struct my_u1 *)rx_desc;
+			staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+			if (i == rx_ring->next_to_use)
+				next_desc = " NTU";
+			else if (i == rx_ring->next_to_clean)
+				next_desc = " NTC";
+			else
+				next_desc = "";
+
+			if (staterr & E1000_RXD_STAT_DD) {
+				/* Descriptor Done */
+				pr_info("%s[0x%03X]     %016llX %016llX ---------------- %p%s\n",
+					"RWB", i,
+					(unsigned long long)le64_to_cpu(u1->a),
+					(unsigned long long)le64_to_cpu(u1->b),
+					buffer_info->skb, next_desc);
+			} else {
+				pr_info("%s[0x%03X]     %016llX %016llX %016llX %p%s\n",
+					"R  ", i,
+					(unsigned long long)le64_to_cpu(u1->a),
+					(unsigned long long)le64_to_cpu(u1->b),
+					(unsigned long long)buffer_info->dma,
+					buffer_info->skb, next_desc);
+
+				if (netif_msg_pktdata(adapter) &&
+				    buffer_info->skb)
+					print_hex_dump(KERN_INFO, "",
+						       DUMP_PREFIX_ADDRESS, 16,
+						       1,
+						       buffer_info->skb->data,
+						       adapter->rx_buffer_len,
+						       true);
+			}
+		}
+	}
+}
+
+/**
+ * e1000_desc_unused - calculate if we have unused descriptors
+ **/
+static int e1000_desc_unused(struct e1000_ring *ring)
+{
+	if (ring->next_to_clean > ring->next_to_use)
+		return ring->next_to_clean - ring->next_to_use - 1;
+
+	return ring->count + ring->next_to_clean - ring->next_to_use - 1;
+}
+
+/**
+ * e1000e_systim_to_hwtstamp - convert system time value to hw time stamp
+ * @adapter: board private structure
+ * @hwtstamps: time stamp structure to update
+ * @systim: unsigned 64bit system time value.
+ *
+ * Convert the system time value stored in the RX/TXSTMP registers into a
+ * hwtstamp which can be used by the upper level time stamping functions.
+ *
+ * The 'systim_lock' spinlock is used to protect the consistency of the
+ * system time value. This is needed because reading the 64 bit time
+ * value involves reading two 32 bit registers. The first read latches the
+ * value.
+ **/
+static void e1000e_systim_to_hwtstamp(struct e1000_adapter *adapter,
+				      struct skb_shared_hwtstamps *hwtstamps,
+				      u64 systim)
+{
+	u64 ns;
+	unsigned long flags;
+
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+	ns = timecounter_cyc2time(&adapter->tc, systim);
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+	memset(hwtstamps, 0, sizeof(*hwtstamps));
+	hwtstamps->hwtstamp = ns_to_ktime(ns);
+}
+
+/**
+ * e1000e_rx_hwtstamp - utility function which checks for Rx time stamp
+ * @adapter: board private structure
+ * @status: descriptor extended error and status field
+ * @skb: particular skb to include time stamp
+ *
+ * If the time stamp is valid, convert it into the timecounter ns value
+ * and store that result into the shhwtstamps structure which is passed
+ * up the network stack.
+ **/
+static void e1000e_rx_hwtstamp(struct e1000_adapter *adapter, u32 status,
+			       struct sk_buff *skb)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u64 rxstmp;
+
+	if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP) ||
+	    !(status & E1000_RXDEXT_STATERR_TST) ||
+	    !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
+		return;
+
+	/* The Rx time stamp registers contain the time stamp.  No other
+	 * received packet will be time stamped until the Rx time stamp
+	 * registers are read.  Because only one packet can be time stamped
+	 * at a time, the register values must belong to this packet and
+	 * therefore none of the other additional attributes need to be
+	 * compared.
+	 */
+	rxstmp = (u64)er32(RXSTMPL);
+	rxstmp |= (u64)er32(RXSTMPH) << 32;
+	e1000e_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), rxstmp);
+
+	adapter->flags2 &= ~FLAG2_CHECK_RX_HWTSTAMP;
+}
+
+/**
+ * e1000_receive_skb - helper function to handle Rx indications
+ * @adapter: board private structure
+ * @staterr: descriptor extended error and status field as written by hardware
+ * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
+ * @skb: pointer to sk_buff to be indicated to stack
+ **/
+static void e1000_receive_skb(struct e1000_adapter *adapter,
+			      struct net_device *netdev, struct sk_buff *skb,
+			      u32 staterr, __le16 vlan)
+{
+	u16 tag = le16_to_cpu(vlan);
+
+	e1000e_rx_hwtstamp(adapter, staterr, skb);
+
+	skb->protocol = eth_type_trans(skb, netdev);
+
+	if (staterr & E1000_RXD_STAT_VP)
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tag);
+
+	napi_gro_receive(&adapter->napi, skb);
+}
+
+/**
+ * e1000_rx_checksum - Receive Checksum Offload
+ * @adapter: board private structure
+ * @status_err: receive descriptor status and error fields
+ * @csum: receive descriptor csum field
+ * @sk_buff: socket buffer with received data
+ **/
+static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
+			      struct sk_buff *skb)
+{
+	u16 status = (u16)status_err;
+	u8 errors = (u8)(status_err >> 24);
+
+	skb_checksum_none_assert(skb);
+
+	/* Rx checksum disabled */
+	if (!(adapter->netdev->features & NETIF_F_RXCSUM))
+		return;
+
+	/* Ignore Checksum bit is set */
+	if (status & E1000_RXD_STAT_IXSM)
+		return;
+
+	/* TCP/UDP checksum error bit or IP checksum error bit is set */
+	if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) {
+		/* let the stack verify checksum errors */
+		adapter->hw_csum_err++;
+		return;
+	}
+
+	/* TCP/UDP Checksum has not been calculated */
+	if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
+		return;
+
+	/* It must be a TCP or UDP packet with a valid checksum */
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	adapter->hw_csum_good++;
+}
+
+static void e1000e_update_rdt_wa(struct e1000_ring *rx_ring, unsigned int i)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	struct e1000_hw *hw = &adapter->hw;
+	s32 ret_val = __ew32_prepare(hw);
+
+	writel(i, rx_ring->tail);
+
+	if (unlikely(!ret_val && (i != readl(rx_ring->tail)))) {
+		u32 rctl = er32(RCTL);
+
+		ew32(RCTL, rctl & ~E1000_RCTL_EN);
+		e_err("ME firmware caused invalid RDT - resetting\n");
+		schedule_work(&adapter->reset_task);
+	}
+}
+
+static void e1000e_update_tdt_wa(struct e1000_ring *tx_ring, unsigned int i)
+{
+	struct e1000_adapter *adapter = tx_ring->adapter;
+	struct e1000_hw *hw = &adapter->hw;
+	s32 ret_val = __ew32_prepare(hw);
+
+	writel(i, tx_ring->tail);
+
+	if (unlikely(!ret_val && (i != readl(tx_ring->tail)))) {
+		u32 tctl = er32(TCTL);
+
+		ew32(TCTL, tctl & ~E1000_TCTL_EN);
+		e_err("ME firmware caused invalid TDT - resetting\n");
+		schedule_work(&adapter->reset_task);
+	}
+}
+
+/**
+ * e1000_alloc_rx_buffers - Replace used receive buffers
+ * @rx_ring: Rx descriptor ring
+ **/
+static void e1000_alloc_rx_buffers(struct e1000_ring *rx_ring,
+				   int cleaned_count, gfp_t gfp)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+	union e1000_rx_desc_extended *rx_desc;
+	struct e1000_buffer *buffer_info;
+	struct sk_buff *skb;
+	unsigned int i;
+	unsigned int bufsz = adapter->rx_buffer_len;
+
+	i = rx_ring->next_to_use;
+	buffer_info = &rx_ring->buffer_info[i];
+
+	while (cleaned_count--) {
+		skb = buffer_info->skb;
+		if (skb) {
+			skb_trim(skb, 0);
+			goto map_skb;
+		}
+
+		skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
+		if (!skb) {
+			/* Better luck next round */
+			adapter->alloc_rx_buff_failed++;
+			break;
+		}
+
+		buffer_info->skb = skb;
+map_skb:
+		buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
+						  adapter->rx_buffer_len,
+						  DMA_FROM_DEVICE);
+		if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+			dev_err(&pdev->dev, "Rx DMA map failed\n");
+			adapter->rx_dma_failed++;
+			break;
+		}
+
+		rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+		rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
+
+		if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
+			/* Force memory writes to complete before letting h/w
+			 * know there are new descriptors to fetch.  (Only
+			 * applicable for weak-ordered memory model archs,
+			 * such as IA-64).
+			 */
+			wmb();
+			if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+				e1000e_update_rdt_wa(rx_ring, i);
+			else
+				writel(i, rx_ring->tail);
+		}
+		i++;
+		if (i == rx_ring->count)
+			i = 0;
+		buffer_info = &rx_ring->buffer_info[i];
+	}
+
+	rx_ring->next_to_use = i;
+}
+
+/**
+ * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
+ * @rx_ring: Rx descriptor ring
+ **/
+static void e1000_alloc_rx_buffers_ps(struct e1000_ring *rx_ring,
+				      int cleaned_count, gfp_t gfp)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+	union e1000_rx_desc_packet_split *rx_desc;
+	struct e1000_buffer *buffer_info;
+	struct e1000_ps_page *ps_page;
+	struct sk_buff *skb;
+	unsigned int i, j;
+
+	i = rx_ring->next_to_use;
+	buffer_info = &rx_ring->buffer_info[i];
+
+	while (cleaned_count--) {
+		rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+
+		for (j = 0; j < PS_PAGE_BUFFERS; j++) {
+			ps_page = &buffer_info->ps_pages[j];
+			if (j >= adapter->rx_ps_pages) {
+				/* all unused desc entries get hw null ptr */
+				rx_desc->read.buffer_addr[j + 1] =
+				    ~cpu_to_le64(0);
+				continue;
+			}
+			if (!ps_page->page) {
+				ps_page->page = alloc_page(gfp);
+				if (!ps_page->page) {
+					adapter->alloc_rx_buff_failed++;
+					goto no_buffers;
+				}
+				ps_page->dma = dma_map_page(&pdev->dev,
+							    ps_page->page,
+							    0, PAGE_SIZE,
+							    DMA_FROM_DEVICE);
+				if (dma_mapping_error(&pdev->dev,
+						      ps_page->dma)) {
+					dev_err(&adapter->pdev->dev,
+						"Rx DMA page map failed\n");
+					adapter->rx_dma_failed++;
+					goto no_buffers;
+				}
+			}
+			/* Refresh the desc even if buffer_addrs
+			 * didn't change because each write-back
+			 * erases this info.
+			 */
+			rx_desc->read.buffer_addr[j + 1] =
+			    cpu_to_le64(ps_page->dma);
+		}
+
+		skb = __netdev_alloc_skb_ip_align(netdev, adapter->rx_ps_bsize0,
+						  gfp);
+
+		if (!skb) {
+			adapter->alloc_rx_buff_failed++;
+			break;
+		}
+
+		buffer_info->skb = skb;
+		buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
+						  adapter->rx_ps_bsize0,
+						  DMA_FROM_DEVICE);
+		if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+			dev_err(&pdev->dev, "Rx DMA map failed\n");
+			adapter->rx_dma_failed++;
+			/* cleanup skb */
+			dev_kfree_skb_any(skb);
+			buffer_info->skb = NULL;
+			break;
+		}
+
+		rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
+
+		if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
+			/* Force memory writes to complete before letting h/w
+			 * know there are new descriptors to fetch.  (Only
+			 * applicable for weak-ordered memory model archs,
+			 * such as IA-64).
+			 */
+			wmb();
+			if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+				e1000e_update_rdt_wa(rx_ring, i << 1);
+			else
+				writel(i << 1, rx_ring->tail);
+		}
+
+		i++;
+		if (i == rx_ring->count)
+			i = 0;
+		buffer_info = &rx_ring->buffer_info[i];
+	}
+
+no_buffers:
+	rx_ring->next_to_use = i;
+}
+
+/**
+ * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
+ * @rx_ring: Rx descriptor ring
+ * @cleaned_count: number of buffers to allocate this pass
+ **/
+
+static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring,
+					 int cleaned_count, gfp_t gfp)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+	union e1000_rx_desc_extended *rx_desc;
+	struct e1000_buffer *buffer_info;
+	struct sk_buff *skb;
+	unsigned int i;
+	unsigned int bufsz = 256 - 16;	/* for skb_reserve */
+
+	i = rx_ring->next_to_use;
+	buffer_info = &rx_ring->buffer_info[i];
+
+	while (cleaned_count--) {
+		skb = buffer_info->skb;
+		if (skb) {
+			skb_trim(skb, 0);
+			goto check_page;
+		}
+
+		skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
+		if (unlikely(!skb)) {
+			/* Better luck next round */
+			adapter->alloc_rx_buff_failed++;
+			break;
+		}
+
+		buffer_info->skb = skb;
+check_page:
+		/* allocate a new page if necessary */
+		if (!buffer_info->page) {
+			buffer_info->page = alloc_page(gfp);
+			if (unlikely(!buffer_info->page)) {
+				adapter->alloc_rx_buff_failed++;
+				break;
+			}
+		}
+
+		if (!buffer_info->dma) {
+			buffer_info->dma = dma_map_page(&pdev->dev,
+							buffer_info->page, 0,
+							PAGE_SIZE,
+							DMA_FROM_DEVICE);
+			if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+				adapter->alloc_rx_buff_failed++;
+				break;
+			}
+		}
+
+		rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+		rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
+
+		if (unlikely(++i == rx_ring->count))
+			i = 0;
+		buffer_info = &rx_ring->buffer_info[i];
+	}
+
+	if (likely(rx_ring->next_to_use != i)) {
+		rx_ring->next_to_use = i;
+		if (unlikely(i-- == 0))
+			i = (rx_ring->count - 1);
+
+		/* Force memory writes to complete before letting h/w
+		 * know there are new descriptors to fetch.  (Only
+		 * applicable for weak-ordered memory model archs,
+		 * such as IA-64).
+		 */
+		wmb();
+		if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+			e1000e_update_rdt_wa(rx_ring, i);
+		else
+			writel(i, rx_ring->tail);
+	}
+}
+
+static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss,
+				 struct sk_buff *skb)
+{
+	if (netdev->features & NETIF_F_RXHASH)
+		skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3);
+}
+
+/**
+ * e1000_clean_rx_irq - Send received data up the network stack
+ * @rx_ring: Rx descriptor ring
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ **/
+static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done,
+			       int work_to_do)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_hw *hw = &adapter->hw;
+	union e1000_rx_desc_extended *rx_desc, *next_rxd;
+	struct e1000_buffer *buffer_info, *next_buffer;
+	u32 length, staterr;
+	unsigned int i;
+	int cleaned_count = 0;
+	bool cleaned = false;
+	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+
+	i = rx_ring->next_to_clean;
+	rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	buffer_info = &rx_ring->buffer_info[i];
+
+	while (staterr & E1000_RXD_STAT_DD) {
+		struct sk_buff *skb;
+
+		if (*work_done >= work_to_do)
+			break;
+		(*work_done)++;
+		dma_rmb();	/* read descriptor and rx_buffer_info after status DD */
+
+		skb = buffer_info->skb;
+		buffer_info->skb = NULL;
+
+		prefetch(skb->data - NET_IP_ALIGN);
+
+		i++;
+		if (i == rx_ring->count)
+			i = 0;
+		next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
+		prefetch(next_rxd);
+
+		next_buffer = &rx_ring->buffer_info[i];
+
+		cleaned = true;
+		cleaned_count++;
+		dma_unmap_single(&pdev->dev, buffer_info->dma,
+				 adapter->rx_buffer_len, DMA_FROM_DEVICE);
+		buffer_info->dma = 0;
+
+		length = le16_to_cpu(rx_desc->wb.upper.length);
+
+		/* !EOP means multiple descriptors were used to store a single
+		 * packet, if that's the case we need to toss it.  In fact, we
+		 * need to toss every packet with the EOP bit clear and the
+		 * next frame that _does_ have the EOP bit set, as it is by
+		 * definition only a frame fragment
+		 */
+		if (unlikely(!(staterr & E1000_RXD_STAT_EOP)))
+			adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+		if (adapter->flags2 & FLAG2_IS_DISCARDING) {
+			/* All receives must fit into a single buffer */
+			e_dbg("Receive packet consumed multiple buffers\n");
+			/* recycle */
+			buffer_info->skb = skb;
+			if (staterr & E1000_RXD_STAT_EOP)
+				adapter->flags2 &= ~FLAG2_IS_DISCARDING;
+			goto next_desc;
+		}
+
+		if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
+			     !(netdev->features & NETIF_F_RXALL))) {
+			/* recycle */
+			buffer_info->skb = skb;
+			goto next_desc;
+		}
+
+		/* adjust length to remove Ethernet CRC */
+		if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
+			/* If configured to store CRC, don't subtract FCS,
+			 * but keep the FCS bytes out of the total_rx_bytes
+			 * counter
+			 */
+			if (netdev->features & NETIF_F_RXFCS)
+				total_rx_bytes -= 4;
+			else
+				length -= 4;
+		}
+
+		total_rx_bytes += length;
+		total_rx_packets++;
+
+		/* code added for copybreak, this should improve
+		 * performance for small packets with large amounts
+		 * of reassembly being done in the stack
+		 */
+		if (length < copybreak) {
+			struct sk_buff *new_skb =
+				napi_alloc_skb(&adapter->napi, length);
+			if (new_skb) {
+				skb_copy_to_linear_data_offset(new_skb,
+							       -NET_IP_ALIGN,
+							       (skb->data -
+								NET_IP_ALIGN),
+							       (length +
+								NET_IP_ALIGN));
+				/* save the skb in buffer_info as good */
+				buffer_info->skb = skb;
+				skb = new_skb;
+			}
+			/* else just continue with the old one */
+		}
+		/* end copybreak code */
+		skb_put(skb, length);
+
+		/* Receive Checksum Offload */
+		e1000_rx_checksum(adapter, staterr, skb);
+
+		e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
+
+		e1000_receive_skb(adapter, netdev, skb, staterr,
+				  rx_desc->wb.upper.vlan);
+
+next_desc:
+		rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
+
+		/* return some buffers to hardware, one at a time is too slow */
+		if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
+			adapter->alloc_rx_buf(rx_ring, cleaned_count,
+					      GFP_ATOMIC);
+			cleaned_count = 0;
+		}
+
+		/* use prefetched values */
+		rx_desc = next_rxd;
+		buffer_info = next_buffer;
+
+		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	}
+	rx_ring->next_to_clean = i;
+
+	cleaned_count = e1000_desc_unused(rx_ring);
+	if (cleaned_count)
+		adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
+
+	adapter->total_rx_bytes += total_rx_bytes;
+	adapter->total_rx_packets += total_rx_packets;
+	return cleaned;
+}
+
+static void e1000_put_txbuf(struct e1000_ring *tx_ring,
+			    struct e1000_buffer *buffer_info)
+{
+	struct e1000_adapter *adapter = tx_ring->adapter;
+
+	if (buffer_info->dma) {
+		if (buffer_info->mapped_as_page)
+			dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
+				       buffer_info->length, DMA_TO_DEVICE);
+		else
+			dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
+					 buffer_info->length, DMA_TO_DEVICE);
+		buffer_info->dma = 0;
+	}
+	if (buffer_info->skb) {
+		dev_kfree_skb_any(buffer_info->skb);
+		buffer_info->skb = NULL;
+	}
+	buffer_info->time_stamp = 0;
+}
+
+static void e1000_print_hw_hang(struct work_struct *work)
+{
+	struct e1000_adapter *adapter = container_of(work,
+						     struct e1000_adapter,
+						     print_hang_task);
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_ring *tx_ring = adapter->tx_ring;
+	unsigned int i = tx_ring->next_to_clean;
+	unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
+	struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 phy_status, phy_1000t_status, phy_ext_status;
+	u16 pci_status;
+
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
+	if (!adapter->tx_hang_recheck && (adapter->flags2 & FLAG2_DMA_BURST)) {
+		/* May be block on write-back, flush and detect again
+		 * flush pending descriptor writebacks to memory
+		 */
+		ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+		/* execute the writes immediately */
+		e1e_flush();
+		/* Due to rare timing issues, write to TIDV again to ensure
+		 * the write is successful
+		 */
+		ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+		/* execute the writes immediately */
+		e1e_flush();
+		adapter->tx_hang_recheck = true;
+		return;
+	}
+	adapter->tx_hang_recheck = false;
+
+	if (er32(TDH(0)) == er32(TDT(0))) {
+		e_dbg("false hang detected, ignoring\n");
+		return;
+	}
+
+	/* Real hang detected */
+	netif_stop_queue(netdev);
+
+	e1e_rphy(hw, MII_BMSR, &phy_status);
+	e1e_rphy(hw, MII_STAT1000, &phy_1000t_status);
+	e1e_rphy(hw, MII_ESTATUS, &phy_ext_status);
+
+	pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
+
+	/* detected Hardware unit hang */
+	e_err("Detected Hardware Unit Hang:\n"
+	      "  TDH                  <%x>\n"
+	      "  TDT                  <%x>\n"
+	      "  next_to_use          <%x>\n"
+	      "  next_to_clean        <%x>\n"
+	      "buffer_info[next_to_clean]:\n"
+	      "  time_stamp           <%lx>\n"
+	      "  next_to_watch        <%x>\n"
+	      "  jiffies              <%lx>\n"
+	      "  next_to_watch.status <%x>\n"
+	      "MAC Status             <%x>\n"
+	      "PHY Status             <%x>\n"
+	      "PHY 1000BASE-T Status  <%x>\n"
+	      "PHY Extended Status    <%x>\n"
+	      "PCI Status             <%x>\n",
+	      readl(tx_ring->head), readl(tx_ring->tail), tx_ring->next_to_use,
+	      tx_ring->next_to_clean, tx_ring->buffer_info[eop].time_stamp,
+	      eop, jiffies, eop_desc->upper.fields.status, er32(STATUS),
+	      phy_status, phy_1000t_status, phy_ext_status, pci_status);
+
+	e1000e_dump(adapter);
+
+	/* Suggest workaround for known h/w issue */
+	if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE))
+		e_err("Try turning off Tx pause (flow control) via ethtool\n");
+}
+
+/**
+ * e1000e_tx_hwtstamp_work - check for Tx time stamp
+ * @work: pointer to work struct
+ *
+ * This work function polls the TSYNCTXCTL valid bit to determine when a
+ * timestamp has been taken for the current stored skb.  The timestamp must
+ * be for this skb because only one such packet is allowed in the queue.
+ */
+static void e1000e_tx_hwtstamp_work(struct work_struct *work)
+{
+	struct e1000_adapter *adapter = container_of(work, struct e1000_adapter,
+						     tx_hwtstamp_work);
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) {
+		struct skb_shared_hwtstamps shhwtstamps;
+		u64 txstmp;
+
+		txstmp = er32(TXSTMPL);
+		txstmp |= (u64)er32(TXSTMPH) << 32;
+
+		e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp);
+
+		skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps);
+		dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+		adapter->tx_hwtstamp_skb = NULL;
+	} else if (time_after(jiffies, adapter->tx_hwtstamp_start
+			      + adapter->tx_timeout_factor * HZ)) {
+		dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+		adapter->tx_hwtstamp_skb = NULL;
+		adapter->tx_hwtstamp_timeouts++;
+		e_warn("clearing Tx timestamp hang\n");
+	} else {
+		/* reschedule to check later */
+		schedule_work(&adapter->tx_hwtstamp_work);
+	}
+}
+
+/**
+ * e1000_clean_tx_irq - Reclaim resources after transmit completes
+ * @tx_ring: Tx descriptor ring
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ **/
+static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring)
+{
+	struct e1000_adapter *adapter = tx_ring->adapter;
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_tx_desc *tx_desc, *eop_desc;
+	struct e1000_buffer *buffer_info;
+	unsigned int i, eop;
+	unsigned int count = 0;
+	unsigned int total_tx_bytes = 0, total_tx_packets = 0;
+	unsigned int bytes_compl = 0, pkts_compl = 0;
+
+	i = tx_ring->next_to_clean;
+	eop = tx_ring->buffer_info[i].next_to_watch;
+	eop_desc = E1000_TX_DESC(*tx_ring, eop);
+
+	while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+	       (count < tx_ring->count)) {
+		bool cleaned = false;
+
+		dma_rmb();		/* read buffer_info after eop_desc */
+		for (; !cleaned; count++) {
+			tx_desc = E1000_TX_DESC(*tx_ring, i);
+			buffer_info = &tx_ring->buffer_info[i];
+			cleaned = (i == eop);
+
+			if (cleaned) {
+				total_tx_packets += buffer_info->segs;
+				total_tx_bytes += buffer_info->bytecount;
+				if (buffer_info->skb) {
+					bytes_compl += buffer_info->skb->len;
+					pkts_compl++;
+				}
+			}
+
+			e1000_put_txbuf(tx_ring, buffer_info);
+			tx_desc->upper.data = 0;
+
+			i++;
+			if (i == tx_ring->count)
+				i = 0;
+		}
+
+		if (i == tx_ring->next_to_use)
+			break;
+		eop = tx_ring->buffer_info[i].next_to_watch;
+		eop_desc = E1000_TX_DESC(*tx_ring, eop);
+	}
+
+	tx_ring->next_to_clean = i;
+
+	netdev_completed_queue(netdev, pkts_compl, bytes_compl);
+
+#define TX_WAKE_THRESHOLD 32
+	if (count && netif_carrier_ok(netdev) &&
+	    e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
+		/* Make sure that anybody stopping the queue after this
+		 * sees the new next_to_clean.
+		 */
+		smp_mb();
+
+		if (netif_queue_stopped(netdev) &&
+		    !(test_bit(__E1000_DOWN, &adapter->state))) {
+			netif_wake_queue(netdev);
+			++adapter->restart_queue;
+		}
+	}
+
+	if (adapter->detect_tx_hung) {
+		/* Detect a transmit hang in hardware, this serializes the
+		 * check with the clearing of time_stamp and movement of i
+		 */
+		adapter->detect_tx_hung = false;
+		if (tx_ring->buffer_info[i].time_stamp &&
+		    time_after(jiffies, tx_ring->buffer_info[i].time_stamp
+			       + (adapter->tx_timeout_factor * HZ)) &&
+		    !(er32(STATUS) & E1000_STATUS_TXOFF))
+			schedule_work(&adapter->print_hang_task);
+		else
+			adapter->tx_hang_recheck = false;
+	}
+	adapter->total_tx_bytes += total_tx_bytes;
+	adapter->total_tx_packets += total_tx_packets;
+	return count < tx_ring->count;
+}
+
+/**
+ * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
+ * @rx_ring: Rx descriptor ring
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ **/
+static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done,
+				  int work_to_do)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	struct e1000_hw *hw = &adapter->hw;
+	union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_buffer *buffer_info, *next_buffer;
+	struct e1000_ps_page *ps_page;
+	struct sk_buff *skb;
+	unsigned int i, j;
+	u32 length, staterr;
+	int cleaned_count = 0;
+	bool cleaned = false;
+	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+
+	i = rx_ring->next_to_clean;
+	rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+	staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
+	buffer_info = &rx_ring->buffer_info[i];
+
+	while (staterr & E1000_RXD_STAT_DD) {
+		if (*work_done >= work_to_do)
+			break;
+		(*work_done)++;
+		skb = buffer_info->skb;
+		dma_rmb();	/* read descriptor and rx_buffer_info after status DD */
+
+		/* in the packet split case this is header only */
+		prefetch(skb->data - NET_IP_ALIGN);
+
+		i++;
+		if (i == rx_ring->count)
+			i = 0;
+		next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
+		prefetch(next_rxd);
+
+		next_buffer = &rx_ring->buffer_info[i];
+
+		cleaned = true;
+		cleaned_count++;
+		dma_unmap_single(&pdev->dev, buffer_info->dma,
+				 adapter->rx_ps_bsize0, DMA_FROM_DEVICE);
+		buffer_info->dma = 0;
+
+		/* see !EOP comment in other Rx routine */
+		if (!(staterr & E1000_RXD_STAT_EOP))
+			adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+		if (adapter->flags2 & FLAG2_IS_DISCARDING) {
+			e_dbg("Packet Split buffers didn't pick up the full packet\n");
+			dev_kfree_skb_irq(skb);
+			if (staterr & E1000_RXD_STAT_EOP)
+				adapter->flags2 &= ~FLAG2_IS_DISCARDING;
+			goto next_desc;
+		}
+
+		if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
+			     !(netdev->features & NETIF_F_RXALL))) {
+			dev_kfree_skb_irq(skb);
+			goto next_desc;
+		}
+
+		length = le16_to_cpu(rx_desc->wb.middle.length0);
+
+		if (!length) {
+			e_dbg("Last part of the packet spanning multiple descriptors\n");
+			dev_kfree_skb_irq(skb);
+			goto next_desc;
+		}
+
+		/* Good Receive */
+		skb_put(skb, length);
+
+		{
+			/* this looks ugly, but it seems compiler issues make
+			 * it more efficient than reusing j
+			 */
+			int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
+
+			/* page alloc/put takes too long and effects small
+			 * packet throughput, so unsplit small packets and
+			 * save the alloc/put only valid in softirq (napi)
+			 * context to call kmap_*
+			 */
+			if (l1 && (l1 <= copybreak) &&
+			    ((length + l1) <= adapter->rx_ps_bsize0)) {
+				u8 *vaddr;
+
+				ps_page = &buffer_info->ps_pages[0];
+
+				/* there is no documentation about how to call
+				 * kmap_atomic, so we can't hold the mapping
+				 * very long
+				 */
+				dma_sync_single_for_cpu(&pdev->dev,
+							ps_page->dma,
+							PAGE_SIZE,
+							DMA_FROM_DEVICE);
+				vaddr = kmap_atomic(ps_page->page);
+				memcpy(skb_tail_pointer(skb), vaddr, l1);
+				kunmap_atomic(vaddr);
+				dma_sync_single_for_device(&pdev->dev,
+							   ps_page->dma,
+							   PAGE_SIZE,
+							   DMA_FROM_DEVICE);
+
+				/* remove the CRC */
+				if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
+					if (!(netdev->features & NETIF_F_RXFCS))
+						l1 -= 4;
+				}
+
+				skb_put(skb, l1);
+				goto copydone;
+			}	/* if */
+		}
+
+		for (j = 0; j < PS_PAGE_BUFFERS; j++) {
+			length = le16_to_cpu(rx_desc->wb.upper.length[j]);
+			if (!length)
+				break;
+
+			ps_page = &buffer_info->ps_pages[j];
+			dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
+				       DMA_FROM_DEVICE);
+			ps_page->dma = 0;
+			skb_fill_page_desc(skb, j, ps_page->page, 0, length);
+			ps_page->page = NULL;
+			skb->len += length;
+			skb->data_len += length;
+			skb->truesize += PAGE_SIZE;
+		}
+
+		/* strip the ethernet crc, problem is we're using pages now so
+		 * this whole operation can get a little cpu intensive
+		 */
+		if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
+			if (!(netdev->features & NETIF_F_RXFCS))
+				pskb_trim(skb, skb->len - 4);
+		}
+
+copydone:
+		total_rx_bytes += skb->len;
+		total_rx_packets++;
+
+		e1000_rx_checksum(adapter, staterr, skb);
+
+		e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
+
+		if (rx_desc->wb.upper.header_status &
+		    cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
+			adapter->rx_hdr_split++;
+
+		e1000_receive_skb(adapter, netdev, skb, staterr,
+				  rx_desc->wb.middle.vlan);
+
+next_desc:
+		rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
+		buffer_info->skb = NULL;
+
+		/* return some buffers to hardware, one at a time is too slow */
+		if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
+			adapter->alloc_rx_buf(rx_ring, cleaned_count,
+					      GFP_ATOMIC);
+			cleaned_count = 0;
+		}
+
+		/* use prefetched values */
+		rx_desc = next_rxd;
+		buffer_info = next_buffer;
+
+		staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
+	}
+	rx_ring->next_to_clean = i;
+
+	cleaned_count = e1000_desc_unused(rx_ring);
+	if (cleaned_count)
+		adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
+
+	adapter->total_rx_bytes += total_rx_bytes;
+	adapter->total_rx_packets += total_rx_packets;
+	return cleaned;
+}
+
+/**
+ * e1000_consume_page - helper function
+ **/
+static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
+			       u16 length)
+{
+	bi->page = NULL;
+	skb->len += length;
+	skb->data_len += length;
+	skb->truesize += PAGE_SIZE;
+}
+
+/**
+ * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ **/
+static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
+				     int work_to_do)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+	union e1000_rx_desc_extended *rx_desc, *next_rxd;
+	struct e1000_buffer *buffer_info, *next_buffer;
+	u32 length, staterr;
+	unsigned int i;
+	int cleaned_count = 0;
+	bool cleaned = false;
+	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+	struct skb_shared_info *shinfo;
+
+	i = rx_ring->next_to_clean;
+	rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	buffer_info = &rx_ring->buffer_info[i];
+
+	while (staterr & E1000_RXD_STAT_DD) {
+		struct sk_buff *skb;
+
+		if (*work_done >= work_to_do)
+			break;
+		(*work_done)++;
+		dma_rmb();	/* read descriptor and rx_buffer_info after status DD */
+
+		skb = buffer_info->skb;
+		buffer_info->skb = NULL;
+
+		++i;
+		if (i == rx_ring->count)
+			i = 0;
+		next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
+		prefetch(next_rxd);
+
+		next_buffer = &rx_ring->buffer_info[i];
+
+		cleaned = true;
+		cleaned_count++;
+		dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE,
+			       DMA_FROM_DEVICE);
+		buffer_info->dma = 0;
+
+		length = le16_to_cpu(rx_desc->wb.upper.length);
+
+		/* errors is only valid for DD + EOP descriptors */
+		if (unlikely((staterr & E1000_RXD_STAT_EOP) &&
+			     ((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
+			      !(netdev->features & NETIF_F_RXALL)))) {
+			/* recycle both page and skb */
+			buffer_info->skb = skb;
+			/* an error means any chain goes out the window too */
+			if (rx_ring->rx_skb_top)
+				dev_kfree_skb_irq(rx_ring->rx_skb_top);
+			rx_ring->rx_skb_top = NULL;
+			goto next_desc;
+		}
+#define rxtop (rx_ring->rx_skb_top)
+		if (!(staterr & E1000_RXD_STAT_EOP)) {
+			/* this descriptor is only the beginning (or middle) */
+			if (!rxtop) {
+				/* this is the beginning of a chain */
+				rxtop = skb;
+				skb_fill_page_desc(rxtop, 0, buffer_info->page,
+						   0, length);
+			} else {
+				/* this is the middle of a chain */
+				shinfo = skb_shinfo(rxtop);
+				skb_fill_page_desc(rxtop, shinfo->nr_frags,
+						   buffer_info->page, 0,
+						   length);
+				/* re-use the skb, only consumed the page */
+				buffer_info->skb = skb;
+			}
+			e1000_consume_page(buffer_info, rxtop, length);
+			goto next_desc;
+		} else {
+			if (rxtop) {
+				/* end of the chain */
+				shinfo = skb_shinfo(rxtop);
+				skb_fill_page_desc(rxtop, shinfo->nr_frags,
+						   buffer_info->page, 0,
+						   length);
+				/* re-use the current skb, we only consumed the
+				 * page
+				 */
+				buffer_info->skb = skb;
+				skb = rxtop;
+				rxtop = NULL;
+				e1000_consume_page(buffer_info, skb, length);
+			} else {
+				/* no chain, got EOP, this buf is the packet
+				 * copybreak to save the put_page/alloc_page
+				 */
+				if (length <= copybreak &&
+				    skb_tailroom(skb) >= length) {
+					u8 *vaddr;
+					vaddr = kmap_atomic(buffer_info->page);
+					memcpy(skb_tail_pointer(skb), vaddr,
+					       length);
+					kunmap_atomic(vaddr);
+					/* re-use the page, so don't erase
+					 * buffer_info->page
+					 */
+					skb_put(skb, length);
+				} else {
+					skb_fill_page_desc(skb, 0,
+							   buffer_info->page, 0,
+							   length);
+					e1000_consume_page(buffer_info, skb,
+							   length);
+				}
+			}
+		}
+
+		/* Receive Checksum Offload */
+		e1000_rx_checksum(adapter, staterr, skb);
+
+		e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
+
+		/* probably a little skewed due to removing CRC */
+		total_rx_bytes += skb->len;
+		total_rx_packets++;
+
+		/* eth type trans needs skb->data to point to something */
+		if (!pskb_may_pull(skb, ETH_HLEN)) {
+			e_err("pskb_may_pull failed.\n");
+			dev_kfree_skb_irq(skb);
+			goto next_desc;
+		}
+
+		e1000_receive_skb(adapter, netdev, skb, staterr,
+				  rx_desc->wb.upper.vlan);
+
+next_desc:
+		rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
+
+		/* return some buffers to hardware, one at a time is too slow */
+		if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+			adapter->alloc_rx_buf(rx_ring, cleaned_count,
+					      GFP_ATOMIC);
+			cleaned_count = 0;
+		}
+
+		/* use prefetched values */
+		rx_desc = next_rxd;
+		buffer_info = next_buffer;
+
+		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	}
+	rx_ring->next_to_clean = i;
+
+	cleaned_count = e1000_desc_unused(rx_ring);
+	if (cleaned_count)
+		adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
+
+	adapter->total_rx_bytes += total_rx_bytes;
+	adapter->total_rx_packets += total_rx_packets;
+	return cleaned;
+}
+
+/**
+ * e1000_clean_rx_ring - Free Rx Buffers per Queue
+ * @rx_ring: Rx descriptor ring
+ **/
+static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	struct e1000_buffer *buffer_info;
+	struct e1000_ps_page *ps_page;
+	struct pci_dev *pdev = adapter->pdev;
+	unsigned int i, j;
+
+	/* Free all the Rx ring sk_buffs */
+	for (i = 0; i < rx_ring->count; i++) {
+		buffer_info = &rx_ring->buffer_info[i];
+		if (buffer_info->dma) {
+			if (adapter->clean_rx == e1000_clean_rx_irq)
+				dma_unmap_single(&pdev->dev, buffer_info->dma,
+						 adapter->rx_buffer_len,
+						 DMA_FROM_DEVICE);
+			else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
+				dma_unmap_page(&pdev->dev, buffer_info->dma,
+					       PAGE_SIZE, DMA_FROM_DEVICE);
+			else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
+				dma_unmap_single(&pdev->dev, buffer_info->dma,
+						 adapter->rx_ps_bsize0,
+						 DMA_FROM_DEVICE);
+			buffer_info->dma = 0;
+		}
+
+		if (buffer_info->page) {
+			put_page(buffer_info->page);
+			buffer_info->page = NULL;
+		}
+
+		if (buffer_info->skb) {
+			dev_kfree_skb(buffer_info->skb);
+			buffer_info->skb = NULL;
+		}
+
+		for (j = 0; j < PS_PAGE_BUFFERS; j++) {
+			ps_page = &buffer_info->ps_pages[j];
+			if (!ps_page->page)
+				break;
+			dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
+				       DMA_FROM_DEVICE);
+			ps_page->dma = 0;
+			put_page(ps_page->page);
+			ps_page->page = NULL;
+		}
+	}
+
+	/* there also may be some cached data from a chained receive */
+	if (rx_ring->rx_skb_top) {
+		dev_kfree_skb(rx_ring->rx_skb_top);
+		rx_ring->rx_skb_top = NULL;
+	}
+
+	/* Zero out the descriptor ring */
+	memset(rx_ring->desc, 0, rx_ring->size);
+
+	rx_ring->next_to_clean = 0;
+	rx_ring->next_to_use = 0;
+	adapter->flags2 &= ~FLAG2_IS_DISCARDING;
+
+	writel(0, rx_ring->head);
+	if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+		e1000e_update_rdt_wa(rx_ring, 0);
+	else
+		writel(0, rx_ring->tail);
+}
+
+static void e1000e_downshift_workaround(struct work_struct *work)
+{
+	struct e1000_adapter *adapter = container_of(work,
+						     struct e1000_adapter,
+						     downshift_task);
+
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
+	e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
+}
+
+/**
+ * e1000_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 icr = er32(ICR);
+
+	/* read ICR disables interrupts using IAM */
+	if (icr & E1000_ICR_LSC) {
+		hw->mac.get_link_status = true;
+		/* ICH8 workaround-- Call gig speed drop workaround on cable
+		 * disconnect (LSC) before accessing any PHY registers
+		 */
+		if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
+		    (!(er32(STATUS) & E1000_STATUS_LU)))
+			schedule_work(&adapter->downshift_task);
+
+		/* 80003ES2LAN workaround-- For packet buffer work-around on
+		 * link down event; disable receives here in the ISR and reset
+		 * adapter in watchdog
+		 */
+		if (netif_carrier_ok(netdev) &&
+		    adapter->flags & FLAG_RX_NEEDS_RESTART) {
+			/* disable receives */
+			u32 rctl = er32(RCTL);
+
+			ew32(RCTL, rctl & ~E1000_RCTL_EN);
+			adapter->flags |= FLAG_RESTART_NOW;
+		}
+		/* guard against interrupt when we're going down */
+		if (!test_bit(__E1000_DOWN, &adapter->state))
+			mod_timer(&adapter->watchdog_timer, jiffies + 1);
+	}
+
+	/* Reset on uncorrectable ECC error */
+	if ((icr & E1000_ICR_ECCER) && ((hw->mac.type == e1000_pch_lpt) ||
+					(hw->mac.type == e1000_pch_spt))) {
+		u32 pbeccsts = er32(PBECCSTS);
+
+		adapter->corr_errors +=
+		    pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
+		adapter->uncorr_errors +=
+		    (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
+		    E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
+
+		/* Do the reset outside of interrupt context */
+		schedule_work(&adapter->reset_task);
+
+		/* return immediately since reset is imminent */
+		return IRQ_HANDLED;
+	}
+
+	if (napi_schedule_prep(&adapter->napi)) {
+		adapter->total_tx_bytes = 0;
+		adapter->total_tx_packets = 0;
+		adapter->total_rx_bytes = 0;
+		adapter->total_rx_packets = 0;
+		__napi_schedule(&adapter->napi);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * e1000_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t e1000_intr(int __always_unused irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl, icr = er32(ICR);
+
+	if (!icr || test_bit(__E1000_DOWN, &adapter->state))
+		return IRQ_NONE;	/* Not our interrupt */
+
+	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+	 * not set, then the adapter didn't send an interrupt
+	 */
+	if (!(icr & E1000_ICR_INT_ASSERTED))
+		return IRQ_NONE;
+
+	/* Interrupt Auto-Mask...upon reading ICR,
+	 * interrupts are masked.  No need for the
+	 * IMC write
+	 */
+
+	if (icr & E1000_ICR_LSC) {
+		hw->mac.get_link_status = true;
+		/* ICH8 workaround-- Call gig speed drop workaround on cable
+		 * disconnect (LSC) before accessing any PHY registers
+		 */
+		if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
+		    (!(er32(STATUS) & E1000_STATUS_LU)))
+			schedule_work(&adapter->downshift_task);
+
+		/* 80003ES2LAN workaround--
+		 * For packet buffer work-around on link down event;
+		 * disable receives here in the ISR and
+		 * reset adapter in watchdog
+		 */
+		if (netif_carrier_ok(netdev) &&
+		    (adapter->flags & FLAG_RX_NEEDS_RESTART)) {
+			/* disable receives */
+			rctl = er32(RCTL);
+			ew32(RCTL, rctl & ~E1000_RCTL_EN);
+			adapter->flags |= FLAG_RESTART_NOW;
+		}
+		/* guard against interrupt when we're going down */
+		if (!test_bit(__E1000_DOWN, &adapter->state))
+			mod_timer(&adapter->watchdog_timer, jiffies + 1);
+	}
+
+	/* Reset on uncorrectable ECC error */
+	if ((icr & E1000_ICR_ECCER) && ((hw->mac.type == e1000_pch_lpt) ||
+					(hw->mac.type == e1000_pch_spt))) {
+		u32 pbeccsts = er32(PBECCSTS);
+
+		adapter->corr_errors +=
+		    pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
+		adapter->uncorr_errors +=
+		    (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
+		    E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
+
+		/* Do the reset outside of interrupt context */
+		schedule_work(&adapter->reset_task);
+
+		/* return immediately since reset is imminent */
+		return IRQ_HANDLED;
+	}
+
+	if (napi_schedule_prep(&adapter->napi)) {
+		adapter->total_tx_bytes = 0;
+		adapter->total_tx_packets = 0;
+		adapter->total_rx_bytes = 0;
+		adapter->total_rx_packets = 0;
+		__napi_schedule(&adapter->napi);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 icr = er32(ICR);
+
+	if (!(icr & E1000_ICR_INT_ASSERTED)) {
+		if (!test_bit(__E1000_DOWN, &adapter->state))
+			ew32(IMS, E1000_IMS_OTHER);
+		return IRQ_NONE;
+	}
+
+	if (icr & adapter->eiac_mask)
+		ew32(ICS, (icr & adapter->eiac_mask));
+
+	if (icr & E1000_ICR_OTHER) {
+		if (!(icr & E1000_ICR_LSC))
+			goto no_link_interrupt;
+		hw->mac.get_link_status = true;
+		/* guard against interrupt when we're going down */
+		if (!test_bit(__E1000_DOWN, &adapter->state))
+			mod_timer(&adapter->watchdog_timer, jiffies + 1);
+	}
+
+no_link_interrupt:
+	if (!test_bit(__E1000_DOWN, &adapter->state))
+		ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t e1000_intr_msix_tx(int __always_unused irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_ring *tx_ring = adapter->tx_ring;
+
+	adapter->total_tx_bytes = 0;
+	adapter->total_tx_packets = 0;
+
+	if (!e1000_clean_tx_irq(tx_ring))
+		/* Ring was not completely cleaned, so fire another interrupt */
+		ew32(ICS, tx_ring->ims_val);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t e1000_intr_msix_rx(int __always_unused irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_ring *rx_ring = adapter->rx_ring;
+
+	/* Write the ITR value calculated at the end of the
+	 * previous interrupt.
+	 */
+	if (rx_ring->set_itr) {
+		writel(1000000000 / (rx_ring->itr_val * 256),
+		       rx_ring->itr_register);
+		rx_ring->set_itr = 0;
+	}
+
+	if (napi_schedule_prep(&adapter->napi)) {
+		adapter->total_rx_bytes = 0;
+		adapter->total_rx_packets = 0;
+		__napi_schedule(&adapter->napi);
+	}
+	return IRQ_HANDLED;
+}
+
+/**
+ * e1000_configure_msix - Configure MSI-X hardware
+ *
+ * e1000_configure_msix sets up the hardware to properly
+ * generate MSI-X interrupts.
+ **/
+static void e1000_configure_msix(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_ring *rx_ring = adapter->rx_ring;
+	struct e1000_ring *tx_ring = adapter->tx_ring;
+	int vector = 0;
+	u32 ctrl_ext, ivar = 0;
+
+	adapter->eiac_mask = 0;
+
+	/* Workaround issue with spurious interrupts on 82574 in MSI-X mode */
+	if (hw->mac.type == e1000_82574) {
+		u32 rfctl = er32(RFCTL);
+
+		rfctl |= E1000_RFCTL_ACK_DIS;
+		ew32(RFCTL, rfctl);
+	}
+
+	/* Configure Rx vector */
+	rx_ring->ims_val = E1000_IMS_RXQ0;
+	adapter->eiac_mask |= rx_ring->ims_val;
+	if (rx_ring->itr_val)
+		writel(1000000000 / (rx_ring->itr_val * 256),
+		       rx_ring->itr_register);
+	else
+		writel(1, rx_ring->itr_register);
+	ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
+
+	/* Configure Tx vector */
+	tx_ring->ims_val = E1000_IMS_TXQ0;
+	vector++;
+	if (tx_ring->itr_val)
+		writel(1000000000 / (tx_ring->itr_val * 256),
+		       tx_ring->itr_register);
+	else
+		writel(1, tx_ring->itr_register);
+	adapter->eiac_mask |= tx_ring->ims_val;
+	ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
+
+	/* set vector for Other Causes, e.g. link changes */
+	vector++;
+	ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16);
+	if (rx_ring->itr_val)
+		writel(1000000000 / (rx_ring->itr_val * 256),
+		       hw->hw_addr + E1000_EITR_82574(vector));
+	else
+		writel(1, hw->hw_addr + E1000_EITR_82574(vector));
+
+	/* Cause Tx interrupts on every write back */
+	ivar |= (1 << 31);
+
+	ew32(IVAR, ivar);
+
+	/* enable MSI-X PBA support */
+	ctrl_ext = er32(CTRL_EXT);
+	ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
+
+	/* Auto-Mask Other interrupts upon ICR read */
+	ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
+	ctrl_ext |= E1000_CTRL_EXT_EIAME;
+	ew32(CTRL_EXT, ctrl_ext);
+	e1e_flush();
+}
+
+void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
+{
+	if (adapter->msix_entries) {
+		pci_disable_msix(adapter->pdev);
+		kfree(adapter->msix_entries);
+		adapter->msix_entries = NULL;
+	} else if (adapter->flags & FLAG_MSI_ENABLED) {
+		pci_disable_msi(adapter->pdev);
+		adapter->flags &= ~FLAG_MSI_ENABLED;
+	}
+}
+
+/**
+ * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
+{
+	int err;
+	int i;
+
+	switch (adapter->int_mode) {
+	case E1000E_INT_MODE_MSIX:
+		if (adapter->flags & FLAG_HAS_MSIX) {
+			adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */
+			adapter->msix_entries = kcalloc(adapter->num_vectors,
+							sizeof(struct
+							       msix_entry),
+							GFP_KERNEL);
+			if (adapter->msix_entries) {
+				struct e1000_adapter *a = adapter;
+
+				for (i = 0; i < adapter->num_vectors; i++)
+					adapter->msix_entries[i].entry = i;
+
+				err = pci_enable_msix_range(a->pdev,
+							    a->msix_entries,
+							    a->num_vectors,
+							    a->num_vectors);
+				if (err > 0)
+					return;
+			}
+			/* MSI-X failed, so fall through and try MSI */
+			e_err("Failed to initialize MSI-X interrupts.  Falling back to MSI interrupts.\n");
+			e1000e_reset_interrupt_capability(adapter);
+		}
+		adapter->int_mode = E1000E_INT_MODE_MSI;
+		/* Fall through */
+	case E1000E_INT_MODE_MSI:
+		if (!pci_enable_msi(adapter->pdev)) {
+			adapter->flags |= FLAG_MSI_ENABLED;
+		} else {
+			adapter->int_mode = E1000E_INT_MODE_LEGACY;
+			e_err("Failed to initialize MSI interrupts.  Falling back to legacy interrupts.\n");
+		}
+		/* Fall through */
+	case E1000E_INT_MODE_LEGACY:
+		/* Don't do anything; this is the system default */
+		break;
+	}
+
+	/* store the number of vectors being used */
+	adapter->num_vectors = 1;
+}
+
+/**
+ * e1000_request_msix - Initialize MSI-X interrupts
+ *
+ * e1000_request_msix allocates MSI-X vectors and requests interrupts from the
+ * kernel.
+ **/
+static int e1000_request_msix(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int err = 0, vector = 0;
+
+	if (strlen(netdev->name) < (IFNAMSIZ - 5))
+		snprintf(adapter->rx_ring->name,
+			 sizeof(adapter->rx_ring->name) - 1,
+			 "%s-rx-0", netdev->name);
+	else
+		memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
+	err = request_irq(adapter->msix_entries[vector].vector,
+			  e1000_intr_msix_rx, 0, adapter->rx_ring->name,
+			  netdev);
+	if (err)
+		return err;
+	adapter->rx_ring->itr_register = adapter->hw.hw_addr +
+	    E1000_EITR_82574(vector);
+	adapter->rx_ring->itr_val = adapter->itr;
+	vector++;
+
+	if (strlen(netdev->name) < (IFNAMSIZ - 5))
+		snprintf(adapter->tx_ring->name,
+			 sizeof(adapter->tx_ring->name) - 1,
+			 "%s-tx-0", netdev->name);
+	else
+		memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
+	err = request_irq(adapter->msix_entries[vector].vector,
+			  e1000_intr_msix_tx, 0, adapter->tx_ring->name,
+			  netdev);
+	if (err)
+		return err;
+	adapter->tx_ring->itr_register = adapter->hw.hw_addr +
+	    E1000_EITR_82574(vector);
+	adapter->tx_ring->itr_val = adapter->itr;
+	vector++;
+
+	err = request_irq(adapter->msix_entries[vector].vector,
+			  e1000_msix_other, 0, netdev->name, netdev);
+	if (err)
+		return err;
+
+	e1000_configure_msix(adapter);
+
+	return 0;
+}
+
+/**
+ * e1000_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int err;
+
+	if (adapter->msix_entries) {
+		err = e1000_request_msix(adapter);
+		if (!err)
+			return err;
+		/* fall back to MSI */
+		e1000e_reset_interrupt_capability(adapter);
+		adapter->int_mode = E1000E_INT_MODE_MSI;
+		e1000e_set_interrupt_capability(adapter);
+	}
+	if (adapter->flags & FLAG_MSI_ENABLED) {
+		err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
+				  netdev->name, netdev);
+		if (!err)
+			return err;
+
+		/* fall back to legacy interrupt */
+		e1000e_reset_interrupt_capability(adapter);
+		adapter->int_mode = E1000E_INT_MODE_LEGACY;
+	}
+
+	err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
+			  netdev->name, netdev);
+	if (err)
+		e_err("Unable to allocate interrupt, Error: %d\n", err);
+
+	return err;
+}
+
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	if (adapter->msix_entries) {
+		int vector = 0;
+
+		free_irq(adapter->msix_entries[vector].vector, netdev);
+		vector++;
+
+		free_irq(adapter->msix_entries[vector].vector, netdev);
+		vector++;
+
+		/* Other Causes interrupt vector */
+		free_irq(adapter->msix_entries[vector].vector, netdev);
+		return;
+	}
+
+	free_irq(adapter->pdev->irq, netdev);
+}
+
+/**
+ * e1000_irq_disable - Mask off interrupt generation on the NIC
+ **/
+static void e1000_irq_disable(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	ew32(IMC, ~0);
+	if (adapter->msix_entries)
+		ew32(EIAC_82574, 0);
+	e1e_flush();
+
+	if (adapter->msix_entries) {
+		int i;
+
+		for (i = 0; i < adapter->num_vectors; i++)
+			synchronize_irq(adapter->msix_entries[i].vector);
+	} else {
+		synchronize_irq(adapter->pdev->irq);
+	}
+}
+
+/**
+ * e1000_irq_enable - Enable default interrupt generation settings
+ **/
+static void e1000_irq_enable(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (adapter->msix_entries) {
+		ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
+		ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
+	} else if ((hw->mac.type == e1000_pch_lpt) ||
+		   (hw->mac.type == e1000_pch_spt)) {
+		ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
+	} else {
+		ew32(IMS, IMS_ENABLE_MASK);
+	}
+	e1e_flush();
+}
+
+/**
+ * e1000e_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded. For AMT version (only with 82573)
+ * of the f/w this means that the network i/f is open.
+ **/
+void e1000e_get_hw_control(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl_ext;
+	u32 swsm;
+
+	/* Let firmware know the driver has taken over */
+	if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
+		swsm = er32(SWSM);
+		ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
+	} else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
+		ctrl_ext = er32(CTRL_EXT);
+		ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+	}
+}
+
+/**
+ * e1000e_release_hw_control - release control of the h/w to f/w
+ * @adapter: address of board private structure
+ *
+ * e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded. For AMT version (only with 82573) i
+ * of the f/w this means that the network i/f is closed.
+ *
+ **/
+void e1000e_release_hw_control(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl_ext;
+	u32 swsm;
+
+	/* Let firmware taken over control of h/w */
+	if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
+		swsm = er32(SWSM);
+		ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
+	} else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
+		ctrl_ext = er32(CTRL_EXT);
+		ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+	}
+}
+
+/**
+ * e1000_alloc_ring_dma - allocate memory for a ring structure
+ **/
+static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
+				struct e1000_ring *ring)
+{
+	struct pci_dev *pdev = adapter->pdev;
+
+	ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
+					GFP_KERNEL);
+	if (!ring->desc)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/**
+ * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @tx_ring: Tx descriptor ring
+ *
+ * Return 0 on success, negative on failure
+ **/
+int e1000e_setup_tx_resources(struct e1000_ring *tx_ring)
+{
+	struct e1000_adapter *adapter = tx_ring->adapter;
+	int err = -ENOMEM, size;
+
+	size = sizeof(struct e1000_buffer) * tx_ring->count;
+	tx_ring->buffer_info = vzalloc(size);
+	if (!tx_ring->buffer_info)
+		goto err;
+
+	/* round up to nearest 4K */
+	tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
+	tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+	err = e1000_alloc_ring_dma(adapter, tx_ring);
+	if (err)
+		goto err;
+
+	tx_ring->next_to_use = 0;
+	tx_ring->next_to_clean = 0;
+
+	return 0;
+err:
+	vfree(tx_ring->buffer_info);
+	e_err("Unable to allocate memory for the transmit descriptor ring\n");
+	return err;
+}
+
+/**
+ * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @rx_ring: Rx descriptor ring
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int e1000e_setup_rx_resources(struct e1000_ring *rx_ring)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	struct e1000_buffer *buffer_info;
+	int i, size, desc_len, err = -ENOMEM;
+
+	size = sizeof(struct e1000_buffer) * rx_ring->count;
+	rx_ring->buffer_info = vzalloc(size);
+	if (!rx_ring->buffer_info)
+		goto err;
+
+	for (i = 0; i < rx_ring->count; i++) {
+		buffer_info = &rx_ring->buffer_info[i];
+		buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
+						sizeof(struct e1000_ps_page),
+						GFP_KERNEL);
+		if (!buffer_info->ps_pages)
+			goto err_pages;
+	}
+
+	desc_len = sizeof(union e1000_rx_desc_packet_split);
+
+	/* Round up to nearest 4K */
+	rx_ring->size = rx_ring->count * desc_len;
+	rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+	err = e1000_alloc_ring_dma(adapter, rx_ring);
+	if (err)
+		goto err_pages;
+
+	rx_ring->next_to_clean = 0;
+	rx_ring->next_to_use = 0;
+	rx_ring->rx_skb_top = NULL;
+
+	return 0;
+
+err_pages:
+	for (i = 0; i < rx_ring->count; i++) {
+		buffer_info = &rx_ring->buffer_info[i];
+		kfree(buffer_info->ps_pages);
+	}
+err:
+	vfree(rx_ring->buffer_info);
+	e_err("Unable to allocate memory for the receive descriptor ring\n");
+	return err;
+}
+
+/**
+ * e1000_clean_tx_ring - Free Tx Buffers
+ * @tx_ring: Tx descriptor ring
+ **/
+static void e1000_clean_tx_ring(struct e1000_ring *tx_ring)
+{
+	struct e1000_adapter *adapter = tx_ring->adapter;
+	struct e1000_buffer *buffer_info;
+	unsigned long size;
+	unsigned int i;
+
+	for (i = 0; i < tx_ring->count; i++) {
+		buffer_info = &tx_ring->buffer_info[i];
+		e1000_put_txbuf(tx_ring, buffer_info);
+	}
+
+	netdev_reset_queue(adapter->netdev);
+	size = sizeof(struct e1000_buffer) * tx_ring->count;
+	memset(tx_ring->buffer_info, 0, size);
+
+	memset(tx_ring->desc, 0, tx_ring->size);
+
+	tx_ring->next_to_use = 0;
+	tx_ring->next_to_clean = 0;
+
+	writel(0, tx_ring->head);
+	if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+		e1000e_update_tdt_wa(tx_ring, 0);
+	else
+		writel(0, tx_ring->tail);
+}
+
+/**
+ * e1000e_free_tx_resources - Free Tx Resources per Queue
+ * @tx_ring: Tx descriptor ring
+ *
+ * Free all transmit software resources
+ **/
+void e1000e_free_tx_resources(struct e1000_ring *tx_ring)
+{
+	struct e1000_adapter *adapter = tx_ring->adapter;
+	struct pci_dev *pdev = adapter->pdev;
+
+	e1000_clean_tx_ring(tx_ring);
+
+	vfree(tx_ring->buffer_info);
+	tx_ring->buffer_info = NULL;
+
+	dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
+			  tx_ring->dma);
+	tx_ring->desc = NULL;
+}
+
+/**
+ * e1000e_free_rx_resources - Free Rx Resources
+ * @rx_ring: Rx descriptor ring
+ *
+ * Free all receive software resources
+ **/
+void e1000e_free_rx_resources(struct e1000_ring *rx_ring)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	struct pci_dev *pdev = adapter->pdev;
+	int i;
+
+	e1000_clean_rx_ring(rx_ring);
+
+	for (i = 0; i < rx_ring->count; i++)
+		kfree(rx_ring->buffer_info[i].ps_pages);
+
+	vfree(rx_ring->buffer_info);
+	rx_ring->buffer_info = NULL;
+
+	dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
+			  rx_ring->dma);
+	rx_ring->desc = NULL;
+}
+
+/**
+ * e1000_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
+ *      Stores a new ITR value based on packets and byte
+ *      counts during the last interrupt.  The advantage of per interrupt
+ *      computation is faster updates and more accurate ITR for the current
+ *      traffic pattern.  Constants in this function were computed
+ *      based on theoretical maximum wire speed and thresholds were set based
+ *      on testing data as well as attempting to minimize response time
+ *      while increasing bulk throughput.  This functionality is controlled
+ *      by the InterruptThrottleRate module parameter.
+ **/
+static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes)
+{
+	unsigned int retval = itr_setting;
+
+	if (packets == 0)
+		return itr_setting;
+
+	switch (itr_setting) {
+	case lowest_latency:
+		/* handle TSO and jumbo frames */
+		if (bytes / packets > 8000)
+			retval = bulk_latency;
+		else if ((packets < 5) && (bytes > 512))
+			retval = low_latency;
+		break;
+	case low_latency:	/* 50 usec aka 20000 ints/s */
+		if (bytes > 10000) {
+			/* this if handles the TSO accounting */
+			if (bytes / packets > 8000)
+				retval = bulk_latency;
+			else if ((packets < 10) || ((bytes / packets) > 1200))
+				retval = bulk_latency;
+			else if ((packets > 35))
+				retval = lowest_latency;
+		} else if (bytes / packets > 2000) {
+			retval = bulk_latency;
+		} else if (packets <= 2 && bytes < 512) {
+			retval = lowest_latency;
+		}
+		break;
+	case bulk_latency:	/* 250 usec aka 4000 ints/s */
+		if (bytes > 25000) {
+			if (packets > 35)
+				retval = low_latency;
+		} else if (bytes < 6000) {
+			retval = low_latency;
+		}
+		break;
+	}
+
+	return retval;
+}
+
+static void e1000_set_itr(struct e1000_adapter *adapter)
+{
+	u16 current_itr;
+	u32 new_itr = adapter->itr;
+
+	/* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+	if (adapter->link_speed != SPEED_1000) {
+		current_itr = 0;
+		new_itr = 4000;
+		goto set_itr_now;
+	}
+
+	if (adapter->flags2 & FLAG2_DISABLE_AIM) {
+		new_itr = 0;
+		goto set_itr_now;
+	}
+
+	adapter->tx_itr = e1000_update_itr(adapter->tx_itr,
+					   adapter->total_tx_packets,
+					   adapter->total_tx_bytes);
+	/* conservative mode (itr 3) eliminates the lowest_latency setting */
+	if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
+		adapter->tx_itr = low_latency;
+
+	adapter->rx_itr = e1000_update_itr(adapter->rx_itr,
+					   adapter->total_rx_packets,
+					   adapter->total_rx_bytes);
+	/* conservative mode (itr 3) eliminates the lowest_latency setting */
+	if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+		adapter->rx_itr = low_latency;
+
+	current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+	/* counts and packets in update_itr are dependent on these numbers */
+	switch (current_itr) {
+	case lowest_latency:
+		new_itr = 70000;
+		break;
+	case low_latency:
+		new_itr = 20000;	/* aka hwitr = ~200 */
+		break;
+	case bulk_latency:
+		new_itr = 4000;
+		break;
+	default:
+		break;
+	}
+
+set_itr_now:
+	if (new_itr != adapter->itr) {
+		/* this attempts to bias the interrupt rate towards Bulk
+		 * by adding intermediate steps when interrupt rate is
+		 * increasing
+		 */
+		new_itr = new_itr > adapter->itr ?
+		    min(adapter->itr + (new_itr >> 2), new_itr) : new_itr;
+		adapter->itr = new_itr;
+		adapter->rx_ring->itr_val = new_itr;
+		if (adapter->msix_entries)
+			adapter->rx_ring->set_itr = 1;
+		else
+			e1000e_write_itr(adapter, new_itr);
+	}
+}
+
+/**
+ * e1000e_write_itr - write the ITR value to the appropriate registers
+ * @adapter: address of board private structure
+ * @itr: new ITR value to program
+ *
+ * e1000e_write_itr determines if the adapter is in MSI-X mode
+ * and, if so, writes the EITR registers with the ITR value.
+ * Otherwise, it writes the ITR value into the ITR register.
+ **/
+void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 new_itr = itr ? 1000000000 / (itr * 256) : 0;
+
+	if (adapter->msix_entries) {
+		int vector;
+
+		for (vector = 0; vector < adapter->num_vectors; vector++)
+			writel(new_itr, hw->hw_addr + E1000_EITR_82574(vector));
+	} else {
+		ew32(ITR, new_itr);
+	}
+}
+
+/**
+ * e1000_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ **/
+static int e1000_alloc_queues(struct e1000_adapter *adapter)
+{
+	int size = sizeof(struct e1000_ring);
+
+	adapter->tx_ring = kzalloc(size, GFP_KERNEL);
+	if (!adapter->tx_ring)
+		goto err;
+	adapter->tx_ring->count = adapter->tx_ring_count;
+	adapter->tx_ring->adapter = adapter;
+
+	adapter->rx_ring = kzalloc(size, GFP_KERNEL);
+	if (!adapter->rx_ring)
+		goto err;
+	adapter->rx_ring->count = adapter->rx_ring_count;
+	adapter->rx_ring->adapter = adapter;
+
+	return 0;
+err:
+	e_err("Unable to allocate memory for queues\n");
+	kfree(adapter->rx_ring);
+	kfree(adapter->tx_ring);
+	return -ENOMEM;
+}
+
+/**
+ * e1000e_poll - NAPI Rx polling callback
+ * @napi: struct associated with this polling callback
+ * @weight: number of packets driver is allowed to process this poll
+ **/
+static int e1000e_poll(struct napi_struct *napi, int weight)
+{
+	struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter,
+						     napi);
+	struct e1000_hw *hw = &adapter->hw;
+	struct net_device *poll_dev = adapter->netdev;
+	int tx_cleaned = 1, work_done = 0;
+
+	adapter = netdev_priv(poll_dev);
+
+	if (!adapter->msix_entries ||
+	    (adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
+		tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring);
+
+	adapter->clean_rx(adapter->rx_ring, &work_done, weight);
+
+	if (!tx_cleaned)
+		work_done = weight;
+
+	/* If weight not fully consumed, exit the polling mode */
+	if (work_done < weight) {
+		if (adapter->itr_setting & 3)
+			e1000_set_itr(adapter);
+		napi_complete(napi);
+		if (!test_bit(__E1000_DOWN, &adapter->state)) {
+			if (adapter->msix_entries)
+				ew32(IMS, adapter->rx_ring->ims_val);
+			else
+				e1000_irq_enable(adapter);
+		}
+	}
+
+	return work_done;
+}
+
+static int e1000_vlan_rx_add_vid(struct net_device *netdev,
+				 __always_unused __be16 proto, u16 vid)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vfta, index;
+
+	/* don't update vlan cookie if already programmed */
+	if ((adapter->hw.mng_cookie.status &
+	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
+	    (vid == adapter->mng_vlan_id))
+		return 0;
+
+	/* add VID to filter table */
+	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+		index = (vid >> 5) & 0x7F;
+		vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
+		vfta |= (1 << (vid & 0x1F));
+		hw->mac.ops.write_vfta(hw, index, vfta);
+	}
+
+	set_bit(vid, adapter->active_vlans);
+
+	return 0;
+}
+
+static int e1000_vlan_rx_kill_vid(struct net_device *netdev,
+				  __always_unused __be16 proto, u16 vid)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vfta, index;
+
+	if ((adapter->hw.mng_cookie.status &
+	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
+	    (vid == adapter->mng_vlan_id)) {
+		/* release control to f/w */
+		e1000e_release_hw_control(adapter);
+		return 0;
+	}
+
+	/* remove VID from filter table */
+	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+		index = (vid >> 5) & 0x7F;
+		vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
+		vfta &= ~(1 << (vid & 0x1F));
+		hw->mac.ops.write_vfta(hw, index, vfta);
+	}
+
+	clear_bit(vid, adapter->active_vlans);
+
+	return 0;
+}
+
+/**
+ * e1000e_vlan_filter_disable - helper to disable hw VLAN filtering
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl;
+
+	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+		/* disable VLAN receive filtering */
+		rctl = er32(RCTL);
+		rctl &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN);
+		ew32(RCTL, rctl);
+
+		if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
+			e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q),
+					       adapter->mng_vlan_id);
+			adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+		}
+	}
+}
+
+/**
+ * e1000e_vlan_filter_enable - helper to enable HW VLAN filtering
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl;
+
+	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+		/* enable VLAN receive filtering */
+		rctl = er32(RCTL);
+		rctl |= E1000_RCTL_VFE;
+		rctl &= ~E1000_RCTL_CFIEN;
+		ew32(RCTL, rctl);
+	}
+}
+
+/**
+ * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl;
+
+	/* disable VLAN tag insert/strip */
+	ctrl = er32(CTRL);
+	ctrl &= ~E1000_CTRL_VME;
+	ew32(CTRL, ctrl);
+}
+
+/**
+ * e1000e_vlan_strip_enable - helper to enable HW VLAN stripping
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_strip_enable(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl;
+
+	/* enable VLAN tag insert/strip */
+	ctrl = er32(CTRL);
+	ctrl |= E1000_CTRL_VME;
+	ew32(CTRL, ctrl);
+}
+
+static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	u16 vid = adapter->hw.mng_cookie.vlan_id;
+	u16 old_vid = adapter->mng_vlan_id;
+
+	if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+		e1000_vlan_rx_add_vid(netdev, htons(ETH_P_8021Q), vid);
+		adapter->mng_vlan_id = vid;
+	}
+
+	if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid))
+		e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), old_vid);
+}
+
+static void e1000_restore_vlan(struct e1000_adapter *adapter)
+{
+	u16 vid;
+
+	e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0);
+
+	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+	    e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
+}
+
+static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 manc, manc2h, mdef, i, j;
+
+	if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
+		return;
+
+	manc = er32(MANC);
+
+	/* enable receiving management packets to the host. this will probably
+	 * generate destination unreachable messages from the host OS, but
+	 * the packets will be handled on SMBUS
+	 */
+	manc |= E1000_MANC_EN_MNG2HOST;
+	manc2h = er32(MANC2H);
+
+	switch (hw->mac.type) {
+	default:
+		manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664);
+		break;
+	case e1000_82574:
+	case e1000_82583:
+		/* Check if IPMI pass-through decision filter already exists;
+		 * if so, enable it.
+		 */
+		for (i = 0, j = 0; i < 8; i++) {
+			mdef = er32(MDEF(i));
+
+			/* Ignore filters with anything other than IPMI ports */
+			if (mdef & ~(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
+				continue;
+
+			/* Enable this decision filter in MANC2H */
+			if (mdef)
+				manc2h |= (1 << i);
+
+			j |= mdef;
+		}
+
+		if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
+			break;
+
+		/* Create new decision filter in an empty filter */
+		for (i = 0, j = 0; i < 8; i++)
+			if (er32(MDEF(i)) == 0) {
+				ew32(MDEF(i), (E1000_MDEF_PORT_623 |
+					       E1000_MDEF_PORT_664));
+				manc2h |= (1 << 1);
+				j++;
+				break;
+			}
+
+		if (!j)
+			e_warn("Unable to create IPMI pass-through filter\n");
+		break;
+	}
+
+	ew32(MANC2H, manc2h);
+	ew32(MANC, manc);
+}
+
+/**
+ * e1000_configure_tx - Configure Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void e1000_configure_tx(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_ring *tx_ring = adapter->tx_ring;
+	u64 tdba;
+	u32 tdlen, tctl, tarc;
+
+	/* Setup the HW Tx Head and Tail descriptor pointers */
+	tdba = tx_ring->dma;
+	tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
+	ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32)));
+	ew32(TDBAH(0), (tdba >> 32));
+	ew32(TDLEN(0), tdlen);
+	ew32(TDH(0), 0);
+	ew32(TDT(0), 0);
+	tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0);
+	tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0);
+
+	/* Set the Tx Interrupt Delay register */
+	ew32(TIDV, adapter->tx_int_delay);
+	/* Tx irq moderation */
+	ew32(TADV, adapter->tx_abs_int_delay);
+
+	if (adapter->flags2 & FLAG2_DMA_BURST) {
+		u32 txdctl = er32(TXDCTL(0));
+
+		txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH |
+			    E1000_TXDCTL_WTHRESH);
+		/* set up some performance related parameters to encourage the
+		 * hardware to use the bus more efficiently in bursts, depends
+		 * on the tx_int_delay to be enabled,
+		 * wthresh = 1 ==> burst write is disabled to avoid Tx stalls
+		 * hthresh = 1 ==> prefetch when one or more available
+		 * pthresh = 0x1f ==> prefetch if internal cache 31 or less
+		 * BEWARE: this seems to work but should be considered first if
+		 * there are Tx hangs or other Tx related bugs
+		 */
+		txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE;
+		ew32(TXDCTL(0), txdctl);
+	}
+	/* erratum work around: set txdctl the same for both queues */
+	ew32(TXDCTL(1), er32(TXDCTL(0)));
+
+	/* Program the Transmit Control Register */
+	tctl = er32(TCTL);
+	tctl &= ~E1000_TCTL_CT;
+	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+	if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
+		tarc = er32(TARC(0));
+		/* set the speed mode bit, we'll clear it if we're not at
+		 * gigabit link later
+		 */
+#define SPEED_MODE_BIT (1 << 21)
+		tarc |= SPEED_MODE_BIT;
+		ew32(TARC(0), tarc);
+	}
+
+	/* errata: program both queues to unweighted RR */
+	if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
+		tarc = er32(TARC(0));
+		tarc |= 1;
+		ew32(TARC(0), tarc);
+		tarc = er32(TARC(1));
+		tarc |= 1;
+		ew32(TARC(1), tarc);
+	}
+
+	/* Setup Transmit Descriptor Settings for eop descriptor */
+	adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
+
+	/* only set IDE if we are delaying interrupts using the timers */
+	if (adapter->tx_int_delay)
+		adapter->txd_cmd |= E1000_TXD_CMD_IDE;
+
+	/* enable Report Status bit */
+	adapter->txd_cmd |= E1000_TXD_CMD_RS;
+
+	ew32(TCTL, tctl);
+
+	hw->mac.ops.config_collision_dist(hw);
+
+	/* SPT Si errata workaround to avoid data corruption */
+	if (hw->mac.type == e1000_pch_spt) {
+		u32 reg_val;
+
+		reg_val = er32(IOSFPC);
+		reg_val |= E1000_RCTL_RDMTS_HEX;
+		ew32(IOSFPC, reg_val);
+
+		reg_val = er32(TARC(0));
+		reg_val |= E1000_TARC0_CB_MULTIQ_3_REQ;
+		ew32(TARC(0), reg_val);
+	}
+}
+
+/**
+ * e1000_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
+			   (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
+static void e1000_setup_rctl(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl, rfctl;
+	u32 pages = 0;
+
+	/* Workaround Si errata on PCHx - configure jumbo frame flow.
+	 * If jumbo frames not set, program related MAC/PHY registers
+	 * to h/w defaults
+	 */
+	if (hw->mac.type >= e1000_pch2lan) {
+		s32 ret_val;
+
+		if (adapter->netdev->mtu > ETH_DATA_LEN)
+			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
+		else
+			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
+
+		if (ret_val)
+			e_dbg("failed to enable|disable jumbo frame workaround mode\n");
+	}
+
+	/* Program MC offset vector base */
+	rctl = er32(RCTL);
+	rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+	rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
+	    E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+	    (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+	/* Do not Store bad packets */
+	rctl &= ~E1000_RCTL_SBP;
+
+	/* Enable Long Packet receive */
+	if (adapter->netdev->mtu <= ETH_DATA_LEN)
+		rctl &= ~E1000_RCTL_LPE;
+	else
+		rctl |= E1000_RCTL_LPE;
+
+	/* Some systems expect that the CRC is included in SMBUS traffic. The
+	 * hardware strips the CRC before sending to both SMBUS (BMC) and to
+	 * host memory when this is enabled
+	 */
+	if (adapter->flags2 & FLAG2_CRC_STRIPPING)
+		rctl |= E1000_RCTL_SECRC;
+
+	/* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
+	if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
+		u16 phy_data;
+
+		e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
+		phy_data &= 0xfff8;
+		phy_data |= (1 << 2);
+		e1e_wphy(hw, PHY_REG(770, 26), phy_data);
+
+		e1e_rphy(hw, 22, &phy_data);
+		phy_data &= 0x0fff;
+		phy_data |= (1 << 14);
+		e1e_wphy(hw, 0x10, 0x2823);
+		e1e_wphy(hw, 0x11, 0x0003);
+		e1e_wphy(hw, 22, phy_data);
+	}
+
+	/* Setup buffer sizes */
+	rctl &= ~E1000_RCTL_SZ_4096;
+	rctl |= E1000_RCTL_BSEX;
+	switch (adapter->rx_buffer_len) {
+	case 2048:
+	default:
+		rctl |= E1000_RCTL_SZ_2048;
+		rctl &= ~E1000_RCTL_BSEX;
+		break;
+	case 4096:
+		rctl |= E1000_RCTL_SZ_4096;
+		break;
+	case 8192:
+		rctl |= E1000_RCTL_SZ_8192;
+		break;
+	case 16384:
+		rctl |= E1000_RCTL_SZ_16384;
+		break;
+	}
+
+	/* Enable Extended Status in all Receive Descriptors */
+	rfctl = er32(RFCTL);
+	rfctl |= E1000_RFCTL_EXTEN;
+	ew32(RFCTL, rfctl);
+
+	/* 82571 and greater support packet-split where the protocol
+	 * header is placed in skb->data and the packet data is
+	 * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
+	 * In the case of a non-split, skb->data is linearly filled,
+	 * followed by the page buffers.  Therefore, skb->data is
+	 * sized to hold the largest protocol header.
+	 *
+	 * allocations using alloc_page take too long for regular MTU
+	 * so only enable packet split for jumbo frames
+	 *
+	 * Using pages when the page size is greater than 16k wastes
+	 * a lot of memory, since we allocate 3 pages at all times
+	 * per packet.
+	 */
+	pages = PAGE_USE_COUNT(adapter->netdev->mtu);
+	if ((pages <= 3) && (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
+		adapter->rx_ps_pages = pages;
+	else
+		adapter->rx_ps_pages = 0;
+
+	if (adapter->rx_ps_pages) {
+		u32 psrctl = 0;
+
+		/* Enable Packet split descriptors */
+		rctl |= E1000_RCTL_DTYP_PS;
+
+		psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT;
+
+		switch (adapter->rx_ps_pages) {
+		case 3:
+			psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE3_SHIFT;
+			/* fall-through */
+		case 2:
+			psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE2_SHIFT;
+			/* fall-through */
+		case 1:
+			psrctl |= PAGE_SIZE >> E1000_PSRCTL_BSIZE1_SHIFT;
+			break;
+		}
+
+		ew32(PSRCTL, psrctl);
+	}
+
+	/* This is useful for sniffing bad packets. */
+	if (adapter->netdev->features & NETIF_F_RXALL) {
+		/* UPE and MPE will be handled by normal PROMISC logic
+		 * in e1000e_set_rx_mode
+		 */
+		rctl |= (E1000_RCTL_SBP |	/* Receive bad packets */
+			 E1000_RCTL_BAM |	/* RX All Bcast Pkts */
+			 E1000_RCTL_PMCF);	/* RX All MAC Ctrl Pkts */
+
+		rctl &= ~(E1000_RCTL_VFE |	/* Disable VLAN filter */
+			  E1000_RCTL_DPF |	/* Allow filtered pause */
+			  E1000_RCTL_CFIEN);	/* Dis VLAN CFIEN Filter */
+		/* Do not mess with E1000_CTRL_VME, it affects transmit as well,
+		 * and that breaks VLANs.
+		 */
+	}
+
+	ew32(RCTL, rctl);
+	/* just started the receive unit, no need to restart */
+	adapter->flags &= ~FLAG_RESTART_NOW;
+}
+
+/**
+ * e1000_configure_rx - Configure Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void e1000_configure_rx(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_ring *rx_ring = adapter->rx_ring;
+	u64 rdba;
+	u32 rdlen, rctl, rxcsum, ctrl_ext;
+
+	if (adapter->rx_ps_pages) {
+		/* this is a 32 byte descriptor */
+		rdlen = rx_ring->count *
+		    sizeof(union e1000_rx_desc_packet_split);
+		adapter->clean_rx = e1000_clean_rx_irq_ps;
+		adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
+	} else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
+		rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
+		adapter->clean_rx = e1000_clean_jumbo_rx_irq;
+		adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
+	} else {
+		rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
+		adapter->clean_rx = e1000_clean_rx_irq;
+		adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
+	}
+
+	/* disable receives while setting up the descriptors */
+	rctl = er32(RCTL);
+	if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
+		ew32(RCTL, rctl & ~E1000_RCTL_EN);
+	e1e_flush();
+	usleep_range(10000, 20000);
+
+	if (adapter->flags2 & FLAG2_DMA_BURST) {
+		/* set the writeback threshold (only takes effect if the RDTR
+		 * is set). set GRAN=1 and write back up to 0x4 worth, and
+		 * enable prefetching of 0x20 Rx descriptors
+		 * granularity = 01
+		 * wthresh = 04,
+		 * hthresh = 04,
+		 * pthresh = 0x20
+		 */
+		ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE);
+		ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE);
+
+		/* override the delay timers for enabling bursting, only if
+		 * the value was not set by the user via module options
+		 */
+		if (adapter->rx_int_delay == DEFAULT_RDTR)
+			adapter->rx_int_delay = BURST_RDTR;
+		if (adapter->rx_abs_int_delay == DEFAULT_RADV)
+			adapter->rx_abs_int_delay = BURST_RADV;
+	}
+
+	/* set the Receive Delay Timer Register */
+	ew32(RDTR, adapter->rx_int_delay);
+
+	/* irq moderation */
+	ew32(RADV, adapter->rx_abs_int_delay);
+	if ((adapter->itr_setting != 0) && (adapter->itr != 0))
+		e1000e_write_itr(adapter, adapter->itr);
+
+	ctrl_ext = er32(CTRL_EXT);
+	/* Auto-Mask interrupts upon ICR access */
+	ctrl_ext |= E1000_CTRL_EXT_IAME;
+	ew32(IAM, 0xffffffff);
+	ew32(CTRL_EXT, ctrl_ext);
+	e1e_flush();
+
+	/* Setup the HW Rx Head and Tail Descriptor Pointers and
+	 * the Base and Length of the Rx Descriptor Ring
+	 */
+	rdba = rx_ring->dma;
+	ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32)));
+	ew32(RDBAH(0), (rdba >> 32));
+	ew32(RDLEN(0), rdlen);
+	ew32(RDH(0), 0);
+	ew32(RDT(0), 0);
+	rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0);
+	rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0);
+
+	/* Enable Receive Checksum Offload for TCP and UDP */
+	rxcsum = er32(RXCSUM);
+	if (adapter->netdev->features & NETIF_F_RXCSUM)
+		rxcsum |= E1000_RXCSUM_TUOFL;
+	else
+		rxcsum &= ~E1000_RXCSUM_TUOFL;
+	ew32(RXCSUM, rxcsum);
+
+	/* With jumbo frames, excessive C-state transition latencies result
+	 * in dropped transactions.
+	 */
+	if (adapter->netdev->mtu > ETH_DATA_LEN) {
+		u32 lat =
+		    ((er32(PBA) & E1000_PBA_RXA_MASK) * 1024 -
+		     adapter->max_frame_size) * 8 / 1000;
+
+		if (adapter->flags & FLAG_IS_ICH) {
+			u32 rxdctl = er32(RXDCTL(0));
+
+			ew32(RXDCTL(0), rxdctl | 0x3);
+		}
+
+		pm_qos_update_request(&adapter->pm_qos_req, lat);
+	} else {
+		pm_qos_update_request(&adapter->pm_qos_req,
+				      PM_QOS_DEFAULT_VALUE);
+	}
+
+	/* Enable Receives */
+	ew32(RCTL, rctl);
+}
+
+/**
+ * e1000e_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
+ *
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ *                0 on no addresses written
+ *                X on writing X addresses to MTA
+ */
+static int e1000e_write_mc_addr_list(struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct netdev_hw_addr *ha;
+	u8 *mta_list;
+	int i;
+
+	if (netdev_mc_empty(netdev)) {
+		/* nothing to program, so clear mc list */
+		hw->mac.ops.update_mc_addr_list(hw, NULL, 0);
+		return 0;
+	}
+
+	mta_list = kzalloc(netdev_mc_count(netdev) * ETH_ALEN, GFP_ATOMIC);
+	if (!mta_list)
+		return -ENOMEM;
+
+	/* update_mc_addr_list expects a packed array of only addresses. */
+	i = 0;
+	netdev_for_each_mc_addr(ha, netdev)
+	    memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+
+	hw->mac.ops.update_mc_addr_list(hw, mta_list, i);
+	kfree(mta_list);
+
+	return netdev_mc_count(netdev);
+}
+
+/**
+ * e1000e_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ *                0 on no addresses written
+ *                X on writing X addresses to the RAR table
+ **/
+static int e1000e_write_uc_addr_list(struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	unsigned int rar_entries;
+	int count = 0;
+
+	rar_entries = hw->mac.ops.rar_get_count(hw);
+
+	/* save a rar entry for our hardware address */
+	rar_entries--;
+
+	/* save a rar entry for the LAA workaround */
+	if (adapter->flags & FLAG_RESET_OVERWRITES_LAA)
+		rar_entries--;
+
+	/* return ENOMEM indicating insufficient memory for addresses */
+	if (netdev_uc_count(netdev) > rar_entries)
+		return -ENOMEM;
+
+	if (!netdev_uc_empty(netdev) && rar_entries) {
+		struct netdev_hw_addr *ha;
+
+		/* write the addresses in reverse order to avoid write
+		 * combining
+		 */
+		netdev_for_each_uc_addr(ha, netdev) {
+			int rval;
+
+			if (!rar_entries)
+				break;
+			rval = hw->mac.ops.rar_set(hw, ha->addr, rar_entries--);
+			if (rval < 0)
+				return -ENOMEM;
+			count++;
+		}
+	}
+
+	/* zero out the remaining RAR entries not used above */
+	for (; rar_entries > 0; rar_entries--) {
+		ew32(RAH(rar_entries), 0);
+		ew32(RAL(rar_entries), 0);
+	}
+	e1e_flush();
+
+	return count;
+}
+
+/**
+ * e1000e_set_rx_mode - secondary unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The ndo_set_rx_mode entry point is called whenever the unicast or multicast
+ * address list or the network interface flags are updated.  This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+static void e1000e_set_rx_mode(struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl;
+
+	if (pm_runtime_suspended(netdev->dev.parent))
+		return;
+
+	/* Check for Promiscuous and All Multicast modes */
+	rctl = er32(RCTL);
+
+	/* clear the affected bits */
+	rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
+
+	if (netdev->flags & IFF_PROMISC) {
+		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+		/* Do not hardware filter VLANs in promisc mode */
+		e1000e_vlan_filter_disable(adapter);
+	} else {
+		int count;
+
+		if (netdev->flags & IFF_ALLMULTI) {
+			rctl |= E1000_RCTL_MPE;
+		} else {
+			/* Write addresses to the MTA, if the attempt fails
+			 * then we should just turn on promiscuous mode so
+			 * that we can at least receive multicast traffic
+			 */
+			count = e1000e_write_mc_addr_list(netdev);
+			if (count < 0)
+				rctl |= E1000_RCTL_MPE;
+		}
+		e1000e_vlan_filter_enable(adapter);
+		/* Write addresses to available RAR registers, if there is not
+		 * sufficient space to store all the addresses then enable
+		 * unicast promiscuous mode
+		 */
+		count = e1000e_write_uc_addr_list(netdev);
+		if (count < 0)
+			rctl |= E1000_RCTL_UPE;
+	}
+
+	ew32(RCTL, rctl);
+
+	if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
+		e1000e_vlan_strip_enable(adapter);
+	else
+		e1000e_vlan_strip_disable(adapter);
+}
+
+static void e1000e_setup_rss_hash(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 mrqc, rxcsum;
+	u32 rss_key[10];
+	int i;
+
+	netdev_rss_key_fill(rss_key, sizeof(rss_key));
+	for (i = 0; i < 10; i++)
+		ew32(RSSRK(i), rss_key[i]);
+
+	/* Direct all traffic to queue 0 */
+	for (i = 0; i < 32; i++)
+		ew32(RETA(i), 0);
+
+	/* Disable raw packet checksumming so that RSS hash is placed in
+	 * descriptor on writeback.
+	 */
+	rxcsum = er32(RXCSUM);
+	rxcsum |= E1000_RXCSUM_PCSD;
+
+	ew32(RXCSUM, rxcsum);
+
+	mrqc = (E1000_MRQC_RSS_FIELD_IPV4 |
+		E1000_MRQC_RSS_FIELD_IPV4_TCP |
+		E1000_MRQC_RSS_FIELD_IPV6 |
+		E1000_MRQC_RSS_FIELD_IPV6_TCP |
+		E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
+
+	ew32(MRQC, mrqc);
+}
+
+/**
+ * e1000e_get_base_timinca - get default SYSTIM time increment attributes
+ * @adapter: board private structure
+ * @timinca: pointer to returned time increment attributes
+ *
+ * Get attributes for incrementing the System Time Register SYSTIML/H at
+ * the default base frequency, and set the cyclecounter shift value.
+ **/
+s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 incvalue, incperiod, shift;
+
+	/* Make sure clock is enabled on I217/I218/I219  before checking
+	 * the frequency
+	 */
+	if (((hw->mac.type == e1000_pch_lpt) ||
+	     (hw->mac.type == e1000_pch_spt)) &&
+	    !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) &&
+	    !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) {
+		u32 fextnvm7 = er32(FEXTNVM7);
+
+		if (!(fextnvm7 & (1 << 0))) {
+			ew32(FEXTNVM7, fextnvm7 | (1 << 0));
+			e1e_flush();
+		}
+	}
+
+	switch (hw->mac.type) {
+	case e1000_pch2lan:
+	case e1000_pch_lpt:
+	case e1000_pch_spt:
+		/* On I217, I218 and I219, the clock frequency is 25MHz
+		 * or 96MHz as indicated by the System Clock Frequency
+		 * Indication
+		 */
+		if (((hw->mac.type != e1000_pch_lpt) &&
+		     (hw->mac.type != e1000_pch_spt)) ||
+		    (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
+			/* Stable 96MHz frequency */
+			incperiod = INCPERIOD_96MHz;
+			incvalue = INCVALUE_96MHz;
+			shift = INCVALUE_SHIFT_96MHz;
+			adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz;
+			break;
+		}
+		/* fall-through */
+	case e1000_82574:
+	case e1000_82583:
+		/* Stable 25MHz frequency */
+		incperiod = INCPERIOD_25MHz;
+		incvalue = INCVALUE_25MHz;
+		shift = INCVALUE_SHIFT_25MHz;
+		adapter->cc.shift = shift;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*timinca = ((incperiod << E1000_TIMINCA_INCPERIOD_SHIFT) |
+		    ((incvalue << shift) & E1000_TIMINCA_INCVALUE_MASK));
+
+	return 0;
+}
+
+/**
+ * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable
+ * @adapter: board private structure
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't cause any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware filters.
+ * Not all combinations are supported, in particular event type has to be
+ * specified. Matching the kind of event packet is not supported, with the
+ * exception of "all V2 events regardless of level 2 or 4".
+ **/
+static int e1000e_config_hwtstamp(struct e1000_adapter *adapter,
+				  struct hwtstamp_config *config)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
+	u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+	u32 rxmtrl = 0;
+	u16 rxudp = 0;
+	bool is_l4 = false;
+	bool is_l2 = false;
+	u32 regval;
+	s32 ret_val;
+
+	if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+		return -EINVAL;
+
+	/* flags reserved for future extensions - must be zero */
+	if (config->flags)
+		return -EINVAL;
+
+	switch (config->tx_type) {
+	case HWTSTAMP_TX_OFF:
+		tsync_tx_ctl = 0;
+		break;
+	case HWTSTAMP_TX_ON:
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	switch (config->rx_filter) {
+	case HWTSTAMP_FILTER_NONE:
+		tsync_rx_ctl = 0;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+		rxmtrl = E1000_RXMTRL_PTP_V1_SYNC_MESSAGE;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+		rxmtrl = E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+		/* Also time stamps V2 L2 Path Delay Request/Response */
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2;
+		rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE;
+		is_l2 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+		/* Also time stamps V2 L2 Path Delay Request/Response. */
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2;
+		rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE;
+		is_l2 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+		/* Hardware cannot filter just V2 L4 Sync messages;
+		 * fall-through to V2 (both L2 and L4) Sync.
+		 */
+	case HWTSTAMP_FILTER_PTP_V2_SYNC:
+		/* Also time stamps V2 Path Delay Request/Response. */
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+		rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE;
+		is_l2 = true;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+		/* Hardware cannot filter just V2 L4 Delay Request messages;
+		 * fall-through to V2 (both L2 and L4) Delay Request.
+		 */
+	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+		/* Also time stamps V2 Path Delay Request/Response. */
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+		rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE;
+		is_l2 = true;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+		/* Hardware cannot filter just V2 L4 or L2 Event messages;
+		 * fall-through to all V2 (both L2 and L4) Events.
+		 */
+	case HWTSTAMP_FILTER_PTP_V2_EVENT:
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
+		config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+		is_l2 = true;
+		is_l4 = true;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+		/* For V1, the hardware can only filter Sync messages or
+		 * Delay Request messages but not both so fall-through to
+		 * time stamp all packets.
+		 */
+	case HWTSTAMP_FILTER_ALL:
+		is_l2 = true;
+		is_l4 = true;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+		config->rx_filter = HWTSTAMP_FILTER_ALL;
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	adapter->hwtstamp_config = *config;
+
+	/* enable/disable Tx h/w time stamping */
+	regval = er32(TSYNCTXCTL);
+	regval &= ~E1000_TSYNCTXCTL_ENABLED;
+	regval |= tsync_tx_ctl;
+	ew32(TSYNCTXCTL, regval);
+	if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) !=
+	    (regval & E1000_TSYNCTXCTL_ENABLED)) {
+		e_err("Timesync Tx Control register not set as expected\n");
+		return -EAGAIN;
+	}
+
+	/* enable/disable Rx h/w time stamping */
+	regval = er32(TSYNCRXCTL);
+	regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
+	regval |= tsync_rx_ctl;
+	ew32(TSYNCRXCTL, regval);
+	if ((er32(TSYNCRXCTL) & (E1000_TSYNCRXCTL_ENABLED |
+				 E1000_TSYNCRXCTL_TYPE_MASK)) !=
+	    (regval & (E1000_TSYNCRXCTL_ENABLED |
+		       E1000_TSYNCRXCTL_TYPE_MASK))) {
+		e_err("Timesync Rx Control register not set as expected\n");
+		return -EAGAIN;
+	}
+
+	/* L2: define ethertype filter for time stamped packets */
+	if (is_l2)
+		rxmtrl |= ETH_P_1588;
+
+	/* define which PTP packets get time stamped */
+	ew32(RXMTRL, rxmtrl);
+
+	/* Filter by destination port */
+	if (is_l4) {
+		rxudp = PTP_EV_PORT;
+		cpu_to_be16s(&rxudp);
+	}
+	ew32(RXUDP, rxudp);
+
+	e1e_flush();
+
+	/* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */
+	er32(RXSTMPH);
+	er32(TXSTMPH);
+
+	/* Get and set the System Time Register SYSTIM base frequency */
+	ret_val = e1000e_get_base_timinca(adapter, &regval);
+	if (ret_val)
+		return ret_val;
+	ew32(TIMINCA, regval);
+
+	/* reset the ns time counter */
+	timecounter_init(&adapter->tc, &adapter->cc,
+			 ktime_to_ns(ktime_get_real()));
+
+	return 0;
+}
+
+/**
+ * e1000_configure - configure the hardware for Rx and Tx
+ * @adapter: private board structure
+ **/
+static void e1000_configure(struct e1000_adapter *adapter)
+{
+	struct e1000_ring *rx_ring = adapter->rx_ring;
+
+	e1000e_set_rx_mode(adapter->netdev);
+
+	e1000_restore_vlan(adapter);
+	e1000_init_manageability_pt(adapter);
+
+	e1000_configure_tx(adapter);
+
+	if (adapter->netdev->features & NETIF_F_RXHASH)
+		e1000e_setup_rss_hash(adapter);
+	e1000_setup_rctl(adapter);
+	e1000_configure_rx(adapter);
+	adapter->alloc_rx_buf(rx_ring, e1000_desc_unused(rx_ring), GFP_KERNEL);
+}
+
+/**
+ * e1000e_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000e_reset ***
+ **/
+void e1000e_power_up_phy(struct e1000_adapter *adapter)
+{
+	if (adapter->hw.phy.ops.power_up)
+		adapter->hw.phy.ops.power_up(&adapter->hw);
+
+	adapter->hw.mac.ops.setup_link(&adapter->hw);
+}
+
+/**
+ * e1000_power_down_phy - Power down the PHY
+ *
+ * Power down the PHY so no link is implied when interface is down.
+ * The PHY cannot be powered down if management or WoL is active.
+ */
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+	if (adapter->hw.phy.ops.power_down)
+		adapter->hw.phy.ops.power_down(&adapter->hw);
+}
+
+/**
+ * e1000e_reset - bring the hardware into a known good state
+ *
+ * This function boots the hardware and enables some settings that
+ * require a configuration cycle of the hardware - those cannot be
+ * set/changed during runtime. After reset the device needs to be
+ * properly configured for Rx, Tx etc.
+ */
+void e1000e_reset(struct e1000_adapter *adapter)
+{
+	struct e1000_mac_info *mac = &adapter->hw.mac;
+	struct e1000_fc_info *fc = &adapter->hw.fc;
+	struct e1000_hw *hw = &adapter->hw;
+	u32 tx_space, min_tx_space, min_rx_space;
+	u32 pba = adapter->pba;
+	u16 hwm;
+
+	/* reset Packet Buffer Allocation to default */
+	ew32(PBA, pba);
+
+	if (adapter->max_frame_size > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) {
+		/* To maintain wire speed transmits, the Tx FIFO should be
+		 * large enough to accommodate two full transmit packets,
+		 * rounded up to the next 1KB and expressed in KB.  Likewise,
+		 * the Rx FIFO should be large enough to accommodate at least
+		 * one full receive packet and is similarly rounded up and
+		 * expressed in KB.
+		 */
+		pba = er32(PBA);
+		/* upper 16 bits has Tx packet buffer allocation size in KB */
+		tx_space = pba >> 16;
+		/* lower 16 bits has Rx packet buffer allocation size in KB */
+		pba &= 0xffff;
+		/* the Tx fifo also stores 16 bytes of information about the Tx
+		 * but don't include ethernet FCS because hardware appends it
+		 */
+		min_tx_space = (adapter->max_frame_size +
+				sizeof(struct e1000_tx_desc) - ETH_FCS_LEN) * 2;
+		min_tx_space = ALIGN(min_tx_space, 1024);
+		min_tx_space >>= 10;
+		/* software strips receive CRC, so leave room for it */
+		min_rx_space = adapter->max_frame_size;
+		min_rx_space = ALIGN(min_rx_space, 1024);
+		min_rx_space >>= 10;
+
+		/* If current Tx allocation is less than the min Tx FIFO size,
+		 * and the min Tx FIFO size is less than the current Rx FIFO
+		 * allocation, take space away from current Rx allocation
+		 */
+		if ((tx_space < min_tx_space) &&
+		    ((min_tx_space - tx_space) < pba)) {
+			pba -= min_tx_space - tx_space;
+
+			/* if short on Rx space, Rx wins and must trump Tx
+			 * adjustment
+			 */
+			if (pba < min_rx_space)
+				pba = min_rx_space;
+		}
+
+		ew32(PBA, pba);
+	}
+
+	/* flow control settings
+	 *
+	 * The high water mark must be low enough to fit one full frame
+	 * (or the size used for early receive) above it in the Rx FIFO.
+	 * Set it to the lower of:
+	 * - 90% of the Rx FIFO size, and
+	 * - the full Rx FIFO size minus one full frame
+	 */
+	if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
+		fc->pause_time = 0xFFFF;
+	else
+		fc->pause_time = E1000_FC_PAUSE_TIME;
+	fc->send_xon = true;
+	fc->current_mode = fc->requested_mode;
+
+	switch (hw->mac.type) {
+	case e1000_ich9lan:
+	case e1000_ich10lan:
+		if (adapter->netdev->mtu > ETH_DATA_LEN) {
+			pba = 14;
+			ew32(PBA, pba);
+			fc->high_water = 0x2800;
+			fc->low_water = fc->high_water - 8;
+			break;
+		}
+		/* fall-through */
+	default:
+		hwm = min(((pba << 10) * 9 / 10),
+			  ((pba << 10) - adapter->max_frame_size));
+
+		fc->high_water = hwm & E1000_FCRTH_RTH;	/* 8-byte granularity */
+		fc->low_water = fc->high_water - 8;
+		break;
+	case e1000_pchlan:
+		/* Workaround PCH LOM adapter hangs with certain network
+		 * loads.  If hangs persist, try disabling Tx flow control.
+		 */
+		if (adapter->netdev->mtu > ETH_DATA_LEN) {
+			fc->high_water = 0x3500;
+			fc->low_water = 0x1500;
+		} else {
+			fc->high_water = 0x5000;
+			fc->low_water = 0x3000;
+		}
+		fc->refresh_time = 0x1000;
+		break;
+	case e1000_pch2lan:
+	case e1000_pch_lpt:
+	case e1000_pch_spt:
+		fc->refresh_time = 0x0400;
+
+		if (adapter->netdev->mtu <= ETH_DATA_LEN) {
+			fc->high_water = 0x05C20;
+			fc->low_water = 0x05048;
+			fc->pause_time = 0x0650;
+			break;
+		}
+
+		pba = 14;
+		ew32(PBA, pba);
+		fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH;
+		fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL;
+		break;
+	}
+
+	/* Alignment of Tx data is on an arbitrary byte boundary with the
+	 * maximum size per Tx descriptor limited only to the transmit
+	 * allocation of the packet buffer minus 96 bytes with an upper
+	 * limit of 24KB due to receive synchronization limitations.
+	 */
+	adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96,
+				       24 << 10);
+
+	/* Disable Adaptive Interrupt Moderation if 2 full packets cannot
+	 * fit in receive buffer.
+	 */
+	if (adapter->itr_setting & 0x3) {
+		if ((adapter->max_frame_size * 2) > (pba << 10)) {
+			if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) {
+				dev_info(&adapter->pdev->dev,
+					 "Interrupt Throttle Rate off\n");
+				adapter->flags2 |= FLAG2_DISABLE_AIM;
+				e1000e_write_itr(adapter, 0);
+			}
+		} else if (adapter->flags2 & FLAG2_DISABLE_AIM) {
+			dev_info(&adapter->pdev->dev,
+				 "Interrupt Throttle Rate on\n");
+			adapter->flags2 &= ~FLAG2_DISABLE_AIM;
+			adapter->itr = 20000;
+			e1000e_write_itr(adapter, adapter->itr);
+		}
+	}
+
+	/* Allow time for pending master requests to run */
+	mac->ops.reset_hw(hw);
+
+	/* For parts with AMT enabled, let the firmware know
+	 * that the network interface is in control
+	 */
+	if (adapter->flags & FLAG_HAS_AMT)
+		e1000e_get_hw_control(adapter);
+
+	ew32(WUC, 0);
+
+	if (mac->ops.init_hw(hw))
+		e_err("Hardware Error\n");
+
+	e1000_update_mng_vlan(adapter);
+
+	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+	ew32(VET, ETH_P_8021Q);
+
+	e1000e_reset_adaptive(hw);
+
+	/* initialize systim and reset the ns time counter */
+	e1000e_config_hwtstamp(adapter, &adapter->hwtstamp_config);
+
+	/* Set EEE advertisement as appropriate */
+	if (adapter->flags2 & FLAG2_HAS_EEE) {
+		s32 ret_val;
+		u16 adv_addr;
+
+		switch (hw->phy.type) {
+		case e1000_phy_82579:
+			adv_addr = I82579_EEE_ADVERTISEMENT;
+			break;
+		case e1000_phy_i217:
+			adv_addr = I217_EEE_ADVERTISEMENT;
+			break;
+		default:
+			dev_err(&adapter->pdev->dev,
+				"Invalid PHY type setting EEE advertisement\n");
+			return;
+		}
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val) {
+			dev_err(&adapter->pdev->dev,
+				"EEE advertisement - unable to acquire PHY\n");
+			return;
+		}
+
+		e1000_write_emi_reg_locked(hw, adv_addr,
+					   hw->dev_spec.ich8lan.eee_disable ?
+					   0 : adapter->eee_advert);
+
+		hw->phy.ops.release(hw);
+	}
+
+	if (!netif_running(adapter->netdev) &&
+	    !test_bit(__E1000_TESTING, &adapter->state))
+		e1000_power_down_phy(adapter);
+
+	e1000_get_phy_info(hw);
+
+	if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
+	    !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
+		u16 phy_data = 0;
+		/* speed up time to link by disabling smart power down, ignore
+		 * the return value of this function because there is nothing
+		 * different we would do if it failed
+		 */
+		e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
+		phy_data &= ~IGP02E1000_PM_SPD;
+		e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
+	}
+}
+
+int e1000e_up(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	/* hardware has been reset, we need to reload some things */
+	e1000_configure(adapter);
+
+	clear_bit(__E1000_DOWN, &adapter->state);
+
+	if (adapter->msix_entries)
+		e1000_configure_msix(adapter);
+	e1000_irq_enable(adapter);
+
+	netif_start_queue(adapter->netdev);
+
+	/* fire a link change interrupt to start the watchdog */
+	if (adapter->msix_entries)
+		ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
+	else
+		ew32(ICS, E1000_ICS_LSC);
+
+	return 0;
+}
+
+static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (!(adapter->flags2 & FLAG2_DMA_BURST))
+		return;
+
+	/* flush pending descriptor writebacks to memory */
+	ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+	ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
+
+	/* execute the writes immediately */
+	e1e_flush();
+
+	/* due to rare timing issues, write to TIDV/RDTR again to ensure the
+	 * write is successful
+	 */
+	ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+	ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
+
+	/* execute the writes immediately */
+	e1e_flush();
+}
+
+static void e1000e_update_stats(struct e1000_adapter *adapter);
+
+/**
+ * e1000e_down - quiesce the device and optionally reset the hardware
+ * @adapter: board private structure
+ * @reset: boolean flag to reset the hardware or not
+ */
+void e1000e_down(struct e1000_adapter *adapter, bool reset)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	u32 tctl, rctl;
+
+	/* signal that we're down so the interrupt handler does not
+	 * reschedule our watchdog timer
+	 */
+	set_bit(__E1000_DOWN, &adapter->state);
+
+	netif_carrier_off(netdev);
+
+	/* disable receives in the hardware */
+	rctl = er32(RCTL);
+	if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
+		ew32(RCTL, rctl & ~E1000_RCTL_EN);
+	/* flush and sleep below */
+
+	netif_stop_queue(netdev);
+
+	/* disable transmits in the hardware */
+	tctl = er32(TCTL);
+	tctl &= ~E1000_TCTL_EN;
+	ew32(TCTL, tctl);
+
+	/* flush both disables and wait for them to finish */
+	e1e_flush();
+	usleep_range(10000, 20000);
+
+	e1000_irq_disable(adapter);
+
+	napi_synchronize(&adapter->napi);
+
+	del_timer_sync(&adapter->watchdog_timer);
+	del_timer_sync(&adapter->phy_info_timer);
+
+	spin_lock(&adapter->stats64_lock);
+	e1000e_update_stats(adapter);
+	spin_unlock(&adapter->stats64_lock);
+
+	e1000e_flush_descriptors(adapter);
+	e1000_clean_tx_ring(adapter->tx_ring);
+	e1000_clean_rx_ring(adapter->rx_ring);
+
+	adapter->link_speed = 0;
+	adapter->link_duplex = 0;
+
+	/* Disable Si errata workaround on PCHx for jumbo frame flow */
+	if ((hw->mac.type >= e1000_pch2lan) &&
+	    (adapter->netdev->mtu > ETH_DATA_LEN) &&
+	    e1000_lv_jumbo_workaround_ich8lan(hw, false))
+		e_dbg("failed to disable jumbo frame workaround mode\n");
+
+	if (reset && !pci_channel_offline(adapter->pdev))
+		e1000e_reset(adapter);
+}
+
+void e1000e_reinit_locked(struct e1000_adapter *adapter)
+{
+	might_sleep();
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+		usleep_range(1000, 2000);
+	e1000e_down(adapter, true);
+	e1000e_up(adapter);
+	clear_bit(__E1000_RESETTING, &adapter->state);
+}
+
+/**
+ * e1000e_cyclecounter_read - read raw cycle counter (used by time counter)
+ * @cc: cyclecounter structure
+ **/
+static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc)
+{
+	struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter,
+						     cc);
+	struct e1000_hw *hw = &adapter->hw;
+	cycle_t systim, systim_next;
+
+	/* latch SYSTIMH on read of SYSTIML */
+	systim = (cycle_t)er32(SYSTIML);
+	systim |= (cycle_t)er32(SYSTIMH) << 32;
+
+	if ((hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82583)) {
+		u64 incvalue, time_delta, rem, temp;
+		int i;
+
+		/* errata for 82574/82583 possible bad bits read from SYSTIMH/L
+		 * check to see that the time is incrementing at a reasonable
+		 * rate and is a multiple of incvalue
+		 */
+		incvalue = er32(TIMINCA) & E1000_TIMINCA_INCVALUE_MASK;
+		for (i = 0; i < E1000_MAX_82574_SYSTIM_REREADS; i++) {
+			/* latch SYSTIMH on read of SYSTIML */
+			systim_next = (cycle_t)er32(SYSTIML);
+			systim_next |= (cycle_t)er32(SYSTIMH) << 32;
+
+			time_delta = systim_next - systim;
+			temp = time_delta;
+			rem = do_div(temp, incvalue);
+
+			systim = systim_next;
+
+			if ((time_delta < E1000_82574_SYSTIM_EPSILON) &&
+			    (rem == 0))
+				break;
+		}
+	}
+	return systim;
+}
+
+/**
+ * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * e1000_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int e1000_sw_init(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
+	adapter->rx_ps_bsize0 = 128;
+	adapter->max_frame_size = netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+	adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+	adapter->tx_ring_count = E1000_DEFAULT_TXD;
+	adapter->rx_ring_count = E1000_DEFAULT_RXD;
+
+	spin_lock_init(&adapter->stats64_lock);
+
+	e1000e_set_interrupt_capability(adapter);
+
+	if (e1000_alloc_queues(adapter))
+		return -ENOMEM;
+
+	/* Setup hardware time stamping cyclecounter */
+	if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
+		adapter->cc.read = e1000e_cyclecounter_read;
+		adapter->cc.mask = CYCLECOUNTER_MASK(64);
+		adapter->cc.mult = 1;
+		/* cc.shift set in e1000e_get_base_tininca() */
+
+		spin_lock_init(&adapter->systim_lock);
+		INIT_WORK(&adapter->tx_hwtstamp_work, e1000e_tx_hwtstamp_work);
+	}
+
+	/* Explicitly disable IRQ since the NIC can be in any state. */
+	e1000_irq_disable(adapter);
+
+	set_bit(__E1000_DOWN, &adapter->state);
+	return 0;
+}
+
+/**
+ * e1000_intr_msi_test - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t e1000_intr_msi_test(int __always_unused irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 icr = er32(ICR);
+
+	e_dbg("icr is %08X\n", icr);
+	if (icr & E1000_ICR_RXSEQ) {
+		adapter->flags &= ~FLAG_MSI_TEST_FAILED;
+		/* Force memory writes to complete before acknowledging the
+		 * interrupt is handled.
+		 */
+		wmb();
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * e1000_test_msi_interrupt - Returns 0 for successful test
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c
+ **/
+static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	int err;
+
+	/* poll_enable hasn't been called yet, so don't need disable */
+	/* clear any pending events */
+	er32(ICR);
+
+	/* free the real vector and request a test handler */
+	e1000_free_irq(adapter);
+	e1000e_reset_interrupt_capability(adapter);
+
+	/* Assume that the test fails, if it succeeds then the test
+	 * MSI irq handler will unset this flag
+	 */
+	adapter->flags |= FLAG_MSI_TEST_FAILED;
+
+	err = pci_enable_msi(adapter->pdev);
+	if (err)
+		goto msi_test_failed;
+
+	err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
+			  netdev->name, netdev);
+	if (err) {
+		pci_disable_msi(adapter->pdev);
+		goto msi_test_failed;
+	}
+
+	/* Force memory writes to complete before enabling and firing an
+	 * interrupt.
+	 */
+	wmb();
+
+	e1000_irq_enable(adapter);
+
+	/* fire an unusual interrupt on the test handler */
+	ew32(ICS, E1000_ICS_RXSEQ);
+	e1e_flush();
+	msleep(100);
+
+	e1000_irq_disable(adapter);
+
+	rmb();			/* read flags after interrupt has been fired */
+
+	if (adapter->flags & FLAG_MSI_TEST_FAILED) {
+		adapter->int_mode = E1000E_INT_MODE_LEGACY;
+		e_info("MSI interrupt test failed, using legacy interrupt.\n");
+	} else {
+		e_dbg("MSI interrupt test succeeded!\n");
+	}
+
+	free_irq(adapter->pdev->irq, netdev);
+	pci_disable_msi(adapter->pdev);
+
+msi_test_failed:
+	e1000e_set_interrupt_capability(adapter);
+	return e1000_request_irq(adapter);
+}
+
+/**
+ * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c, called with e1000 interrupts disabled.
+ **/
+static int e1000_test_msi(struct e1000_adapter *adapter)
+{
+	int err;
+	u16 pci_cmd;
+
+	if (!(adapter->flags & FLAG_MSI_ENABLED))
+		return 0;
+
+	/* disable SERR in case the MSI write causes a master abort */
+	pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
+	if (pci_cmd & PCI_COMMAND_SERR)
+		pci_write_config_word(adapter->pdev, PCI_COMMAND,
+				      pci_cmd & ~PCI_COMMAND_SERR);
+
+	err = e1000_test_msi_interrupt(adapter);
+
+	/* re-enable SERR */
+	if (pci_cmd & PCI_COMMAND_SERR) {
+		pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
+		pci_cmd |= PCI_COMMAND_SERR;
+		pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
+	}
+
+	return err;
+}
+
+/**
+ * e1000_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP).  At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int e1000_open(struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+	int err;
+
+	/* disallow open during test */
+	if (test_bit(__E1000_TESTING, &adapter->state))
+		return -EBUSY;
+
+	pm_runtime_get_sync(&pdev->dev);
+
+	netif_carrier_off(netdev);
+
+	/* allocate transmit descriptors */
+	err = e1000e_setup_tx_resources(adapter->tx_ring);
+	if (err)
+		goto err_setup_tx;
+
+	/* allocate receive descriptors */
+	err = e1000e_setup_rx_resources(adapter->rx_ring);
+	if (err)
+		goto err_setup_rx;
+
+	/* If AMT is enabled, let the firmware know that the network
+	 * interface is now open and reset the part to a known state.
+	 */
+	if (adapter->flags & FLAG_HAS_AMT) {
+		e1000e_get_hw_control(adapter);
+		e1000e_reset(adapter);
+	}
+
+	e1000e_power_up_phy(adapter);
+
+	adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+	if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
+		e1000_update_mng_vlan(adapter);
+
+	/* DMA latency requirement to workaround jumbo issue */
+	pm_qos_add_request(&adapter->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
+
+	/* before we allocate an interrupt, we must be ready to handle it.
+	 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+	 * as soon as we call pci_request_irq, so we have to setup our
+	 * clean_rx handler before we do so.
+	 */
+	e1000_configure(adapter);
+
+	err = e1000_request_irq(adapter);
+	if (err)
+		goto err_req_irq;
+
+	/* Work around PCIe errata with MSI interrupts causing some chipsets to
+	 * ignore e1000e MSI messages, which means we need to test our MSI
+	 * interrupt now
+	 */
+	if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
+		err = e1000_test_msi(adapter);
+		if (err) {
+			e_err("Interrupt allocation failed\n");
+			goto err_req_irq;
+		}
+	}
+
+	/* From here on the code is the same as e1000e_up() */
+	clear_bit(__E1000_DOWN, &adapter->state);
+
+	napi_enable(&adapter->napi);
+
+	e1000_irq_enable(adapter);
+
+	adapter->tx_hang_recheck = false;
+	netif_start_queue(netdev);
+
+	hw->mac.get_link_status = true;
+	pm_runtime_put(&pdev->dev);
+
+	/* fire a link status change interrupt to start the watchdog */
+	if (adapter->msix_entries)
+		ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
+	else
+		ew32(ICS, E1000_ICS_LSC);
+
+	return 0;
+
+err_req_irq:
+	e1000e_release_hw_control(adapter);
+	e1000_power_down_phy(adapter);
+	e1000e_free_rx_resources(adapter->rx_ring);
+err_setup_rx:
+	e1000e_free_tx_resources(adapter->tx_ring);
+err_setup_tx:
+	e1000e_reset(adapter);
+	pm_runtime_put_sync(&pdev->dev);
+
+	return err;
+}
+
+/**
+ * e1000_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.  The hardware is still under the drivers control, but
+ * needs to be disabled.  A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int e1000_close(struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct pci_dev *pdev = adapter->pdev;
+	int count = E1000_CHECK_RESET_COUNT;
+
+	while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
+		usleep_range(10000, 20000);
+
+	WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
+
+	pm_runtime_get_sync(&pdev->dev);
+
+	if (!test_bit(__E1000_DOWN, &adapter->state)) {
+		e1000e_down(adapter, true);
+		e1000_free_irq(adapter);
+
+		/* Link status message must follow this format */
+		pr_info("%s NIC Link is Down\n", adapter->netdev->name);
+	}
+
+	napi_disable(&adapter->napi);
+
+	e1000e_free_tx_resources(adapter->tx_ring);
+	e1000e_free_rx_resources(adapter->rx_ring);
+
+	/* kill manageability vlan ID if supported, but not if a vlan with
+	 * the same ID is registered on the host OS (let 8021q kill it)
+	 */
+	if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
+		e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q),
+				       adapter->mng_vlan_id);
+
+	/* If AMT is enabled, let the firmware know that the network
+	 * interface is now closed
+	 */
+	if ((adapter->flags & FLAG_HAS_AMT) &&
+	    !test_bit(__E1000_TESTING, &adapter->state))
+		e1000e_release_hw_control(adapter);
+
+	pm_qos_remove_request(&adapter->pm_qos_req);
+
+	pm_runtime_put_sync(&pdev->dev);
+
+	return 0;
+}
+
+/**
+ * e1000_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int e1000_set_mac(struct net_device *netdev, void *p)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
+
+	hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
+
+	if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
+		/* activate the work around */
+		e1000e_set_laa_state_82571(&adapter->hw, 1);
+
+		/* Hold a copy of the LAA in RAR[14] This is done so that
+		 * between the time RAR[0] gets clobbered  and the time it
+		 * gets fixed (in e1000_watchdog), the actual LAA is in one
+		 * of the RARs and no incoming packets directed to this port
+		 * are dropped. Eventually the LAA will be in RAR[0] and
+		 * RAR[14]
+		 */
+		hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr,
+				    adapter->hw.mac.rar_entry_count - 1);
+	}
+
+	return 0;
+}
+
+/**
+ * e1000e_update_phy_task - work thread to update phy
+ * @work: pointer to our work struct
+ *
+ * this worker thread exists because we must acquire a
+ * semaphore to read the phy, which we could msleep while
+ * waiting for it, and we can't msleep in a timer.
+ **/
+static void e1000e_update_phy_task(struct work_struct *work)
+{
+	struct e1000_adapter *adapter = container_of(work,
+						     struct e1000_adapter,
+						     update_phy_task);
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
+	e1000_get_phy_info(hw);
+
+	/* Enable EEE on 82579 after link up */
+	if (hw->phy.type >= e1000_phy_82579)
+		e1000_set_eee_pchlan(hw);
+}
+
+/**
+ * e1000_update_phy_info - timre call-back to update PHY info
+ * @data: pointer to adapter cast into an unsigned long
+ *
+ * Need to wait a few seconds after link up to get diagnostic information from
+ * the phy
+ **/
+static void e1000_update_phy_info(unsigned long data)
+{
+	struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
+	schedule_work(&adapter->update_phy_task);
+}
+
+/**
+ * e1000e_update_phy_stats - Update the PHY statistics counters
+ * @adapter: board private structure
+ *
+ * Read/clear the upper 16-bit PHY registers and read/accumulate lower
+ **/
+static void e1000e_update_phy_stats(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	s32 ret_val;
+	u16 phy_data;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return;
+
+	/* A page set is expensive so check if already on desired page.
+	 * If not, set to the page with the PHY status registers.
+	 */
+	hw->phy.addr = 1;
+	ret_val = e1000e_read_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+					   &phy_data);
+	if (ret_val)
+		goto release;
+	if (phy_data != (HV_STATS_PAGE << IGP_PAGE_SHIFT)) {
+		ret_val = hw->phy.ops.set_page(hw,
+					       HV_STATS_PAGE << IGP_PAGE_SHIFT);
+		if (ret_val)
+			goto release;
+	}
+
+	/* Single Collision Count */
+	hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
+	if (!ret_val)
+		adapter->stats.scc += phy_data;
+
+	/* Excessive Collision Count */
+	hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
+	if (!ret_val)
+		adapter->stats.ecol += phy_data;
+
+	/* Multiple Collision Count */
+	hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
+	if (!ret_val)
+		adapter->stats.mcc += phy_data;
+
+	/* Late Collision Count */
+	hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
+	if (!ret_val)
+		adapter->stats.latecol += phy_data;
+
+	/* Collision Count - also used for adaptive IFS */
+	hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
+	if (!ret_val)
+		hw->mac.collision_delta = phy_data;
+
+	/* Defer Count */
+	hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
+	if (!ret_val)
+		adapter->stats.dc += phy_data;
+
+	/* Transmit with no CRS */
+	hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
+	if (!ret_val)
+		adapter->stats.tncrs += phy_data;
+
+release:
+	hw->phy.ops.release(hw);
+}
+
+/**
+ * e1000e_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+static void e1000e_update_stats(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+
+	/* Prevent stats update while adapter is being reset, or if the pci
+	 * connection is down.
+	 */
+	if (adapter->link_speed == 0)
+		return;
+	if (pci_channel_offline(pdev))
+		return;
+
+	adapter->stats.crcerrs += er32(CRCERRS);
+	adapter->stats.gprc += er32(GPRC);
+	adapter->stats.gorc += er32(GORCL);
+	er32(GORCH);		/* Clear gorc */
+	adapter->stats.bprc += er32(BPRC);
+	adapter->stats.mprc += er32(MPRC);
+	adapter->stats.roc += er32(ROC);
+
+	adapter->stats.mpc += er32(MPC);
+
+	/* Half-duplex statistics */
+	if (adapter->link_duplex == HALF_DUPLEX) {
+		if (adapter->flags2 & FLAG2_HAS_PHY_STATS) {
+			e1000e_update_phy_stats(adapter);
+		} else {
+			adapter->stats.scc += er32(SCC);
+			adapter->stats.ecol += er32(ECOL);
+			adapter->stats.mcc += er32(MCC);
+			adapter->stats.latecol += er32(LATECOL);
+			adapter->stats.dc += er32(DC);
+
+			hw->mac.collision_delta = er32(COLC);
+
+			if ((hw->mac.type != e1000_82574) &&
+			    (hw->mac.type != e1000_82583))
+				adapter->stats.tncrs += er32(TNCRS);
+		}
+		adapter->stats.colc += hw->mac.collision_delta;
+	}
+
+	adapter->stats.xonrxc += er32(XONRXC);
+	adapter->stats.xontxc += er32(XONTXC);
+	adapter->stats.xoffrxc += er32(XOFFRXC);
+	adapter->stats.xofftxc += er32(XOFFTXC);
+	adapter->stats.gptc += er32(GPTC);
+	adapter->stats.gotc += er32(GOTCL);
+	er32(GOTCH);		/* Clear gotc */
+	adapter->stats.rnbc += er32(RNBC);
+	adapter->stats.ruc += er32(RUC);
+
+	adapter->stats.mptc += er32(MPTC);
+	adapter->stats.bptc += er32(BPTC);
+
+	/* used for adaptive IFS */
+
+	hw->mac.tx_packet_delta = er32(TPT);
+	adapter->stats.tpt += hw->mac.tx_packet_delta;
+
+	adapter->stats.algnerrc += er32(ALGNERRC);
+	adapter->stats.rxerrc += er32(RXERRC);
+	adapter->stats.cexterr += er32(CEXTERR);
+	adapter->stats.tsctc += er32(TSCTC);
+	adapter->stats.tsctfc += er32(TSCTFC);
+
+	/* Fill out the OS statistics structure */
+	netdev->stats.multicast = adapter->stats.mprc;
+	netdev->stats.collisions = adapter->stats.colc;
+
+	/* Rx Errors */
+
+	/* RLEC on some newer hardware can be incorrect so build
+	 * our own version based on RUC and ROC
+	 */
+	netdev->stats.rx_errors = adapter->stats.rxerrc +
+	    adapter->stats.crcerrs + adapter->stats.algnerrc +
+	    adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr;
+	netdev->stats.rx_length_errors = adapter->stats.ruc +
+	    adapter->stats.roc;
+	netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+	netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
+	netdev->stats.rx_missed_errors = adapter->stats.mpc;
+
+	/* Tx Errors */
+	netdev->stats.tx_errors = adapter->stats.ecol + adapter->stats.latecol;
+	netdev->stats.tx_aborted_errors = adapter->stats.ecol;
+	netdev->stats.tx_window_errors = adapter->stats.latecol;
+	netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
+
+	/* Tx Dropped needs to be maintained elsewhere */
+
+	/* Management Stats */
+	adapter->stats.mgptc += er32(MGTPTC);
+	adapter->stats.mgprc += er32(MGTPRC);
+	adapter->stats.mgpdc += er32(MGTPDC);
+
+	/* Correctable ECC Errors */
+	if ((hw->mac.type == e1000_pch_lpt) ||
+	    (hw->mac.type == e1000_pch_spt)) {
+		u32 pbeccsts = er32(PBECCSTS);
+
+		adapter->corr_errors +=
+		    pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
+		adapter->uncorr_errors +=
+		    (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
+		    E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
+	}
+}
+
+/**
+ * e1000_phy_read_status - Update the PHY register status snapshot
+ * @adapter: board private structure
+ **/
+static void e1000_phy_read_status(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_phy_regs *phy = &adapter->phy_regs;
+
+	if (!pm_runtime_suspended((&adapter->pdev->dev)->parent) &&
+	    (er32(STATUS) & E1000_STATUS_LU) &&
+	    (adapter->hw.phy.media_type == e1000_media_type_copper)) {
+		int ret_val;
+
+		ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
+		ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
+		ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
+		ret_val |= e1e_rphy(hw, MII_LPA, &phy->lpa);
+		ret_val |= e1e_rphy(hw, MII_EXPANSION, &phy->expansion);
+		ret_val |= e1e_rphy(hw, MII_CTRL1000, &phy->ctrl1000);
+		ret_val |= e1e_rphy(hw, MII_STAT1000, &phy->stat1000);
+		ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
+		if (ret_val)
+			e_warn("Error reading PHY register\n");
+	} else {
+		/* Do not read PHY registers if link is not up
+		 * Set values to typical power-on defaults
+		 */
+		phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
+		phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
+			     BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
+			     BMSR_ERCAP);
+		phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
+				  ADVERTISE_ALL | ADVERTISE_CSMA);
+		phy->lpa = 0;
+		phy->expansion = EXPANSION_ENABLENPAGE;
+		phy->ctrl1000 = ADVERTISE_1000FULL;
+		phy->stat1000 = 0;
+		phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
+	}
+}
+
+static void e1000_print_link_info(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl = er32(CTRL);
+
+	/* Link status message must follow this format for user tools */
+	pr_info("%s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
+		adapter->netdev->name, adapter->link_speed,
+		adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half",
+		(ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" :
+		(ctrl & E1000_CTRL_RFCE) ? "Rx" :
+		(ctrl & E1000_CTRL_TFCE) ? "Tx" : "None");
+}
+
+static bool e1000e_has_link(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	bool link_active = false;
+	s32 ret_val = 0;
+
+	/* get_link_status is set on LSC (link status) interrupt or
+	 * Rx sequence error interrupt.  get_link_status will stay
+	 * false until the check_for_link establishes link
+	 * for copper adapters ONLY
+	 */
+	switch (hw->phy.media_type) {
+	case e1000_media_type_copper:
+		if (hw->mac.get_link_status) {
+			ret_val = hw->mac.ops.check_for_link(hw);
+			link_active = !hw->mac.get_link_status;
+		} else {
+			link_active = true;
+		}
+		break;
+	case e1000_media_type_fiber:
+		ret_val = hw->mac.ops.check_for_link(hw);
+		link_active = !!(er32(STATUS) & E1000_STATUS_LU);
+		break;
+	case e1000_media_type_internal_serdes:
+		ret_val = hw->mac.ops.check_for_link(hw);
+		link_active = adapter->hw.mac.serdes_has_link;
+		break;
+	default:
+	case e1000_media_type_unknown:
+		break;
+	}
+
+	if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
+	    (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+		/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
+		e_info("Gigabit has been disabled, downgrading speed\n");
+	}
+
+	return link_active;
+}
+
+static void e1000e_enable_receives(struct e1000_adapter *adapter)
+{
+	/* make sure the receive unit is started */
+	if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
+	    (adapter->flags & FLAG_RESTART_NOW)) {
+		struct e1000_hw *hw = &adapter->hw;
+		u32 rctl = er32(RCTL);
+
+		ew32(RCTL, rctl | E1000_RCTL_EN);
+		adapter->flags &= ~FLAG_RESTART_NOW;
+	}
+}
+
+static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	/* With 82574 controllers, PHY needs to be checked periodically
+	 * for hung state and reset, if two calls return true
+	 */
+	if (e1000_check_phy_82574(hw))
+		adapter->phy_hang_count++;
+	else
+		adapter->phy_hang_count = 0;
+
+	if (adapter->phy_hang_count > 1) {
+		adapter->phy_hang_count = 0;
+		e_dbg("PHY appears hung - resetting\n");
+		schedule_work(&adapter->reset_task);
+	}
+}
+
+/**
+ * e1000_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void e1000_watchdog(unsigned long data)
+{
+	struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+
+	/* Do the rest outside of interrupt context */
+	schedule_work(&adapter->watchdog_task);
+
+	/* TODO: make this use queue_delayed_work() */
+}
+
+static void e1000_watchdog_task(struct work_struct *work)
+{
+	struct e1000_adapter *adapter = container_of(work,
+						     struct e1000_adapter,
+						     watchdog_task);
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_mac_info *mac = &adapter->hw.mac;
+	struct e1000_phy_info *phy = &adapter->hw.phy;
+	struct e1000_ring *tx_ring = adapter->tx_ring;
+	struct e1000_hw *hw = &adapter->hw;
+	u32 link, tctl;
+
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
+	link = e1000e_has_link(adapter);
+	if ((netif_carrier_ok(netdev)) && link) {
+		/* Cancel scheduled suspend requests. */
+		pm_runtime_resume(netdev->dev.parent);
+
+		e1000e_enable_receives(adapter);
+		goto link_up;
+	}
+
+	if ((e1000e_enable_tx_pkt_filtering(hw)) &&
+	    (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
+		e1000_update_mng_vlan(adapter);
+
+	if (link) {
+		if (!netif_carrier_ok(netdev)) {
+			bool txb2b = true;
+
+			/* Cancel scheduled suspend requests. */
+			pm_runtime_resume(netdev->dev.parent);
+
+			/* update snapshot of PHY registers on LSC */
+			e1000_phy_read_status(adapter);
+			mac->ops.get_link_up_info(&adapter->hw,
+						  &adapter->link_speed,
+						  &adapter->link_duplex);
+			e1000_print_link_info(adapter);
+
+			/* check if SmartSpeed worked */
+			e1000e_check_downshift(hw);
+			if (phy->speed_downgraded)
+				netdev_warn(netdev,
+					    "Link Speed was downgraded by SmartSpeed\n");
+
+			/* On supported PHYs, check for duplex mismatch only
+			 * if link has autonegotiated at 10/100 half
+			 */
+			if ((hw->phy.type == e1000_phy_igp_3 ||
+			     hw->phy.type == e1000_phy_bm) &&
+			    hw->mac.autoneg &&
+			    (adapter->link_speed == SPEED_10 ||
+			     adapter->link_speed == SPEED_100) &&
+			    (adapter->link_duplex == HALF_DUPLEX)) {
+				u16 autoneg_exp;
+
+				e1e_rphy(hw, MII_EXPANSION, &autoneg_exp);
+
+				if (!(autoneg_exp & EXPANSION_NWAY))
+					e_info("Autonegotiated half duplex but link partner cannot autoneg.  Try forcing full duplex if link gets many collisions.\n");
+			}
+
+			/* adjust timeout factor according to speed/duplex */
+			adapter->tx_timeout_factor = 1;
+			switch (adapter->link_speed) {
+			case SPEED_10:
+				txb2b = false;
+				adapter->tx_timeout_factor = 16;
+				break;
+			case SPEED_100:
+				txb2b = false;
+				adapter->tx_timeout_factor = 10;
+				break;
+			}
+
+			/* workaround: re-program speed mode bit after
+			 * link-up event
+			 */
+			if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
+			    !txb2b) {
+				u32 tarc0;
+
+				tarc0 = er32(TARC(0));
+				tarc0 &= ~SPEED_MODE_BIT;
+				ew32(TARC(0), tarc0);
+			}
+
+			/* disable TSO for pcie and 10/100 speeds, to avoid
+			 * some hardware issues
+			 */
+			if (!(adapter->flags & FLAG_TSO_FORCE)) {
+				switch (adapter->link_speed) {
+				case SPEED_10:
+				case SPEED_100:
+					e_info("10/100 speed: disabling TSO\n");
+					netdev->features &= ~NETIF_F_TSO;
+					netdev->features &= ~NETIF_F_TSO6;
+					break;
+				case SPEED_1000:
+					netdev->features |= NETIF_F_TSO;
+					netdev->features |= NETIF_F_TSO6;
+					break;
+				default:
+					/* oops */
+					break;
+				}
+			}
+
+			/* enable transmits in the hardware, need to do this
+			 * after setting TARC(0)
+			 */
+			tctl = er32(TCTL);
+			tctl |= E1000_TCTL_EN;
+			ew32(TCTL, tctl);
+
+			/* Perform any post-link-up configuration before
+			 * reporting link up.
+			 */
+			if (phy->ops.cfg_on_link_up)
+				phy->ops.cfg_on_link_up(hw);
+
+			netif_carrier_on(netdev);
+
+			if (!test_bit(__E1000_DOWN, &adapter->state))
+				mod_timer(&adapter->phy_info_timer,
+					  round_jiffies(jiffies + 2 * HZ));
+		}
+	} else {
+		if (netif_carrier_ok(netdev)) {
+			adapter->link_speed = 0;
+			adapter->link_duplex = 0;
+			/* Link status message must follow this format */
+			pr_info("%s NIC Link is Down\n", adapter->netdev->name);
+			netif_carrier_off(netdev);
+			if (!test_bit(__E1000_DOWN, &adapter->state))
+				mod_timer(&adapter->phy_info_timer,
+					  round_jiffies(jiffies + 2 * HZ));
+
+			/* 8000ES2LAN requires a Rx packet buffer work-around
+			 * on link down event; reset the controller to flush
+			 * the Rx packet buffer.
+			 */
+			if (adapter->flags & FLAG_RX_NEEDS_RESTART)
+				adapter->flags |= FLAG_RESTART_NOW;
+			else
+				pm_schedule_suspend(netdev->dev.parent,
+						    LINK_TIMEOUT);
+		}
+	}
+
+link_up:
+	spin_lock(&adapter->stats64_lock);
+	e1000e_update_stats(adapter);
+
+	mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+	adapter->tpt_old = adapter->stats.tpt;
+	mac->collision_delta = adapter->stats.colc - adapter->colc_old;
+	adapter->colc_old = adapter->stats.colc;
+
+	adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
+	adapter->gorc_old = adapter->stats.gorc;
+	adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
+	adapter->gotc_old = adapter->stats.gotc;
+	spin_unlock(&adapter->stats64_lock);
+
+	/* If the link is lost the controller stops DMA, but
+	 * if there is queued Tx work it cannot be done.  So
+	 * reset the controller to flush the Tx packet buffers.
+	 */
+	if (!netif_carrier_ok(netdev) &&
+	    (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
+		adapter->flags |= FLAG_RESTART_NOW;
+
+	/* If reset is necessary, do it outside of interrupt context. */
+	if (adapter->flags & FLAG_RESTART_NOW) {
+		schedule_work(&adapter->reset_task);
+		/* return immediately since reset is imminent */
+		return;
+	}
+
+	e1000e_update_adaptive(&adapter->hw);
+
+	/* Simple mode for Interrupt Throttle Rate (ITR) */
+	if (adapter->itr_setting == 4) {
+		/* Symmetric Tx/Rx gets a reduced ITR=2000;
+		 * Total asymmetrical Tx or Rx gets ITR=8000;
+		 * everyone else is between 2000-8000.
+		 */
+		u32 goc = (adapter->gotc + adapter->gorc) / 10000;
+		u32 dif = (adapter->gotc > adapter->gorc ?
+			   adapter->gotc - adapter->gorc :
+			   adapter->gorc - adapter->gotc) / 10000;
+		u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
+
+		e1000e_write_itr(adapter, itr);
+	}
+
+	/* Cause software interrupt to ensure Rx ring is cleaned */
+	if (adapter->msix_entries)
+		ew32(ICS, adapter->rx_ring->ims_val);
+	else
+		ew32(ICS, E1000_ICS_RXDMT0);
+
+	/* flush pending descriptors to memory before detecting Tx hang */
+	e1000e_flush_descriptors(adapter);
+
+	/* Force detection of hung controller every watchdog period */
+	adapter->detect_tx_hung = true;
+
+	/* With 82571 controllers, LAA may be overwritten due to controller
+	 * reset from the other port. Set the appropriate LAA in RAR[0]
+	 */
+	if (e1000e_get_laa_state_82571(hw))
+		hw->mac.ops.rar_set(hw, adapter->hw.mac.addr, 0);
+
+	if (adapter->flags2 & FLAG2_CHECK_PHY_HANG)
+		e1000e_check_82574_phy_workaround(adapter);
+
+	/* Clear valid timestamp stuck in RXSTMPL/H due to a Rx error */
+	if (adapter->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) {
+		if ((adapter->flags2 & FLAG2_CHECK_RX_HWTSTAMP) &&
+		    (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) {
+			er32(RXSTMPH);
+			adapter->rx_hwtstamp_cleared++;
+		} else {
+			adapter->flags2 |= FLAG2_CHECK_RX_HWTSTAMP;
+		}
+	}
+
+	/* Reset the timer */
+	if (!test_bit(__E1000_DOWN, &adapter->state))
+		mod_timer(&adapter->watchdog_timer,
+			  round_jiffies(jiffies + 2 * HZ));
+}
+
+#define E1000_TX_FLAGS_CSUM		0x00000001
+#define E1000_TX_FLAGS_VLAN		0x00000002
+#define E1000_TX_FLAGS_TSO		0x00000004
+#define E1000_TX_FLAGS_IPV4		0x00000008
+#define E1000_TX_FLAGS_NO_FCS		0x00000010
+#define E1000_TX_FLAGS_HWTSTAMP		0x00000020
+#define E1000_TX_FLAGS_VLAN_MASK	0xffff0000
+#define E1000_TX_FLAGS_VLAN_SHIFT	16
+
+static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb,
+		     __be16 protocol)
+{
+	struct e1000_context_desc *context_desc;
+	struct e1000_buffer *buffer_info;
+	unsigned int i;
+	u32 cmd_length = 0;
+	u16 ipcse = 0, mss;
+	u8 ipcss, ipcso, tucss, tucso, hdr_len;
+	int err;
+
+	if (!skb_is_gso(skb))
+		return 0;
+
+	err = skb_cow_head(skb, 0);
+	if (err < 0)
+		return err;
+
+	hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+	mss = skb_shinfo(skb)->gso_size;
+	if (protocol == htons(ETH_P_IP)) {
+		struct iphdr *iph = ip_hdr(skb);
+		iph->tot_len = 0;
+		iph->check = 0;
+		tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
+							 0, IPPROTO_TCP, 0);
+		cmd_length = E1000_TXD_CMD_IP;
+		ipcse = skb_transport_offset(skb) - 1;
+	} else if (skb_is_gso_v6(skb)) {
+		ipv6_hdr(skb)->payload_len = 0;
+		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+						       &ipv6_hdr(skb)->daddr,
+						       0, IPPROTO_TCP, 0);
+		ipcse = 0;
+	}
+	ipcss = skb_network_offset(skb);
+	ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
+	tucss = skb_transport_offset(skb);
+	tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+
+	cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+		       E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+
+	i = tx_ring->next_to_use;
+	context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+	buffer_info = &tx_ring->buffer_info[i];
+
+	context_desc->lower_setup.ip_fields.ipcss = ipcss;
+	context_desc->lower_setup.ip_fields.ipcso = ipcso;
+	context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
+	context_desc->upper_setup.tcp_fields.tucss = tucss;
+	context_desc->upper_setup.tcp_fields.tucso = tucso;
+	context_desc->upper_setup.tcp_fields.tucse = 0;
+	context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
+	context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+	context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+
+	buffer_info->time_stamp = jiffies;
+	buffer_info->next_to_watch = i;
+
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+	tx_ring->next_to_use = i;
+
+	return 1;
+}
+
+static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb,
+			  __be16 protocol)
+{
+	struct e1000_adapter *adapter = tx_ring->adapter;
+	struct e1000_context_desc *context_desc;
+	struct e1000_buffer *buffer_info;
+	unsigned int i;
+	u8 css;
+	u32 cmd_len = E1000_TXD_CMD_DEXT;
+
+	if (skb->ip_summed != CHECKSUM_PARTIAL)
+		return false;
+
+	switch (protocol) {
+	case cpu_to_be16(ETH_P_IP):
+		if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+			cmd_len |= E1000_TXD_CMD_TCP;
+		break;
+	case cpu_to_be16(ETH_P_IPV6):
+		/* XXX not handling all IPV6 headers */
+		if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+			cmd_len |= E1000_TXD_CMD_TCP;
+		break;
+	default:
+		if (unlikely(net_ratelimit()))
+			e_warn("checksum_partial proto=%x!\n",
+			       be16_to_cpu(protocol));
+		break;
+	}
+
+	css = skb_checksum_start_offset(skb);
+
+	i = tx_ring->next_to_use;
+	buffer_info = &tx_ring->buffer_info[i];
+	context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+
+	context_desc->lower_setup.ip_config = 0;
+	context_desc->upper_setup.tcp_fields.tucss = css;
+	context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset;
+	context_desc->upper_setup.tcp_fields.tucse = 0;
+	context_desc->tcp_seg_setup.data = 0;
+	context_desc->cmd_and_length = cpu_to_le32(cmd_len);
+
+	buffer_info->time_stamp = jiffies;
+	buffer_info->next_to_watch = i;
+
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+	tx_ring->next_to_use = i;
+
+	return true;
+}
+
+static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb,
+			unsigned int first, unsigned int max_per_txd,
+			unsigned int nr_frags)
+{
+	struct e1000_adapter *adapter = tx_ring->adapter;
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_buffer *buffer_info;
+	unsigned int len = skb_headlen(skb);
+	unsigned int offset = 0, size, count = 0, i;
+	unsigned int f, bytecount, segs;
+
+	i = tx_ring->next_to_use;
+
+	while (len) {
+		buffer_info = &tx_ring->buffer_info[i];
+		size = min(len, max_per_txd);
+
+		buffer_info->length = size;
+		buffer_info->time_stamp = jiffies;
+		buffer_info->next_to_watch = i;
+		buffer_info->dma = dma_map_single(&pdev->dev,
+						  skb->data + offset,
+						  size, DMA_TO_DEVICE);
+		buffer_info->mapped_as_page = false;
+		if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+			goto dma_error;
+
+		len -= size;
+		offset += size;
+		count++;
+
+		if (len) {
+			i++;
+			if (i == tx_ring->count)
+				i = 0;
+		}
+	}
+
+	for (f = 0; f < nr_frags; f++) {
+		const struct skb_frag_struct *frag;
+
+		frag = &skb_shinfo(skb)->frags[f];
+		len = skb_frag_size(frag);
+		offset = 0;
+
+		while (len) {
+			i++;
+			if (i == tx_ring->count)
+				i = 0;
+
+			buffer_info = &tx_ring->buffer_info[i];
+			size = min(len, max_per_txd);
+
+			buffer_info->length = size;
+			buffer_info->time_stamp = jiffies;
+			buffer_info->next_to_watch = i;
+			buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag,
+							    offset, size,
+							    DMA_TO_DEVICE);
+			buffer_info->mapped_as_page = true;
+			if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+				goto dma_error;
+
+			len -= size;
+			offset += size;
+			count++;
+		}
+	}
+
+	segs = skb_shinfo(skb)->gso_segs ? : 1;
+	/* multiply data chunks by size of headers */
+	bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
+
+	tx_ring->buffer_info[i].skb = skb;
+	tx_ring->buffer_info[i].segs = segs;
+	tx_ring->buffer_info[i].bytecount = bytecount;
+	tx_ring->buffer_info[first].next_to_watch = i;
+
+	return count;
+
+dma_error:
+	dev_err(&pdev->dev, "Tx DMA map failed\n");
+	buffer_info->dma = 0;
+	if (count)
+		count--;
+
+	while (count--) {
+		if (i == 0)
+			i += tx_ring->count;
+		i--;
+		buffer_info = &tx_ring->buffer_info[i];
+		e1000_put_txbuf(tx_ring, buffer_info);
+	}
+
+	return 0;
+}
+
+static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count)
+{
+	struct e1000_adapter *adapter = tx_ring->adapter;
+	struct e1000_tx_desc *tx_desc = NULL;
+	struct e1000_buffer *buffer_info;
+	u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
+	unsigned int i;
+
+	if (tx_flags & E1000_TX_FLAGS_TSO) {
+		txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
+		    E1000_TXD_CMD_TSE;
+		txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+
+		if (tx_flags & E1000_TX_FLAGS_IPV4)
+			txd_upper |= E1000_TXD_POPTS_IXSM << 8;
+	}
+
+	if (tx_flags & E1000_TX_FLAGS_CSUM) {
+		txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+		txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+	}
+
+	if (tx_flags & E1000_TX_FLAGS_VLAN) {
+		txd_lower |= E1000_TXD_CMD_VLE;
+		txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
+	}
+
+	if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
+		txd_lower &= ~(E1000_TXD_CMD_IFCS);
+
+	if (unlikely(tx_flags & E1000_TX_FLAGS_HWTSTAMP)) {
+		txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+		txd_upper |= E1000_TXD_EXTCMD_TSTAMP;
+	}
+
+	i = tx_ring->next_to_use;
+
+	do {
+		buffer_info = &tx_ring->buffer_info[i];
+		tx_desc = E1000_TX_DESC(*tx_ring, i);
+		tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+		tx_desc->lower.data = cpu_to_le32(txd_lower |
+						  buffer_info->length);
+		tx_desc->upper.data = cpu_to_le32(txd_upper);
+
+		i++;
+		if (i == tx_ring->count)
+			i = 0;
+	} while (--count > 0);
+
+	tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
+
+	/* txd_cmd re-enables FCS, so we'll re-disable it here as desired. */
+	if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
+		tx_desc->lower.data &= ~(cpu_to_le32(E1000_TXD_CMD_IFCS));
+
+	/* Force memory writes to complete before letting h/w
+	 * know there are new descriptors to fetch.  (Only
+	 * applicable for weak-ordered memory model archs,
+	 * such as IA-64).
+	 */
+	wmb();
+
+	tx_ring->next_to_use = i;
+}
+
+#define MINIMUM_DHCP_PACKET_SIZE 282
+static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
+				    struct sk_buff *skb)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u16 length, offset;
+
+	if (skb_vlan_tag_present(skb) &&
+	    !((skb_vlan_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
+	      (adapter->hw.mng_cookie.status &
+	       E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
+		return 0;
+
+	if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
+		return 0;
+
+	if (((struct ethhdr *)skb->data)->h_proto != htons(ETH_P_IP))
+		return 0;
+
+	{
+		const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data + 14);
+		struct udphdr *udp;
+
+		if (ip->protocol != IPPROTO_UDP)
+			return 0;
+
+		udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2));
+		if (ntohs(udp->dest) != 67)
+			return 0;
+
+		offset = (u8 *)udp + 8 - skb->data;
+		length = skb->len - offset;
+		return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
+	}
+
+	return 0;
+}
+
+static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
+{
+	struct e1000_adapter *adapter = tx_ring->adapter;
+
+	netif_stop_queue(adapter->netdev);
+	/* Herbert's original patch had:
+	 *  smp_mb__after_netif_stop_queue();
+	 * but since that doesn't exist yet, just open code it.
+	 */
+	smp_mb();
+
+	/* We need to check again in a case another CPU has just
+	 * made room available.
+	 */
+	if (e1000_desc_unused(tx_ring) < size)
+		return -EBUSY;
+
+	/* A reprieve! */
+	netif_start_queue(adapter->netdev);
+	++adapter->restart_queue;
+	return 0;
+}
+
+static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
+{
+	BUG_ON(size > tx_ring->count);
+
+	if (e1000_desc_unused(tx_ring) >= size)
+		return 0;
+	return __e1000_maybe_stop_tx(tx_ring, size);
+}
+
+static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
+				    struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_ring *tx_ring = adapter->tx_ring;
+	unsigned int first;
+	unsigned int tx_flags = 0;
+	unsigned int len = skb_headlen(skb);
+	unsigned int nr_frags;
+	unsigned int mss;
+	int count = 0;
+	int tso;
+	unsigned int f;
+	__be16 protocol = vlan_get_protocol(skb);
+
+	if (test_bit(__E1000_DOWN, &adapter->state)) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	if (skb->len <= 0) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	/* The minimum packet size with TCTL.PSP set is 17 bytes so
+	 * pad skb in order to meet this minimum size requirement
+	 */
+	if (skb_put_padto(skb, 17))
+		return NETDEV_TX_OK;
+
+	mss = skb_shinfo(skb)->gso_size;
+	if (mss) {
+		u8 hdr_len;
+
+		/* TSO Workaround for 82571/2/3 Controllers -- if skb->data
+		 * points to just header, pull a few bytes of payload from
+		 * frags into skb->data
+		 */
+		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+		/* we do this workaround for ES2LAN, but it is un-necessary,
+		 * avoiding it could save a lot of cycles
+		 */
+		if (skb->data_len && (hdr_len == len)) {
+			unsigned int pull_size;
+
+			pull_size = min_t(unsigned int, 4, skb->data_len);
+			if (!__pskb_pull_tail(skb, pull_size)) {
+				e_err("__pskb_pull_tail failed.\n");
+				dev_kfree_skb_any(skb);
+				return NETDEV_TX_OK;
+			}
+			len = skb_headlen(skb);
+		}
+	}
+
+	/* reserve a descriptor for the offload context */
+	if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
+		count++;
+	count++;
+
+	count += DIV_ROUND_UP(len, adapter->tx_fifo_limit);
+
+	nr_frags = skb_shinfo(skb)->nr_frags;
+	for (f = 0; f < nr_frags; f++)
+		count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]),
+				      adapter->tx_fifo_limit);
+
+	if (adapter->hw.mac.tx_pkt_filtering)
+		e1000_transfer_dhcp_info(adapter, skb);
+
+	/* need: count + 2 desc gap to keep tail from touching
+	 * head, otherwise try next time
+	 */
+	if (e1000_maybe_stop_tx(tx_ring, count + 2))
+		return NETDEV_TX_BUSY;
+
+	if (skb_vlan_tag_present(skb)) {
+		tx_flags |= E1000_TX_FLAGS_VLAN;
+		tx_flags |= (skb_vlan_tag_get(skb) <<
+			     E1000_TX_FLAGS_VLAN_SHIFT);
+	}
+
+	first = tx_ring->next_to_use;
+
+	tso = e1000_tso(tx_ring, skb, protocol);
+	if (tso < 0) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	if (tso)
+		tx_flags |= E1000_TX_FLAGS_TSO;
+	else if (e1000_tx_csum(tx_ring, skb, protocol))
+		tx_flags |= E1000_TX_FLAGS_CSUM;
+
+	/* Old method was to assume IPv4 packet by default if TSO was enabled.
+	 * 82571 hardware supports TSO capabilities for IPv6 as well...
+	 * no longer assume, we must.
+	 */
+	if (protocol == htons(ETH_P_IP))
+		tx_flags |= E1000_TX_FLAGS_IPV4;
+
+	if (unlikely(skb->no_fcs))
+		tx_flags |= E1000_TX_FLAGS_NO_FCS;
+
+	/* if count is 0 then mapping error has occurred */
+	count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit,
+			     nr_frags);
+	if (count) {
+		if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+		    (adapter->flags & FLAG_HAS_HW_TIMESTAMP) &&
+		    !adapter->tx_hwtstamp_skb) {
+			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+			tx_flags |= E1000_TX_FLAGS_HWTSTAMP;
+			adapter->tx_hwtstamp_skb = skb_get(skb);
+			adapter->tx_hwtstamp_start = jiffies;
+			schedule_work(&adapter->tx_hwtstamp_work);
+		} else {
+			skb_tx_timestamp(skb);
+		}
+
+		netdev_sent_queue(netdev, skb->len);
+		e1000_tx_queue(tx_ring, tx_flags, count);
+		/* Make sure there is space in the ring for the next send. */
+		e1000_maybe_stop_tx(tx_ring,
+				    (MAX_SKB_FRAGS *
+				     DIV_ROUND_UP(PAGE_SIZE,
+						  adapter->tx_fifo_limit) + 2));
+
+		if (!skb->xmit_more ||
+		    netif_xmit_stopped(netdev_get_tx_queue(netdev, 0))) {
+			if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+				e1000e_update_tdt_wa(tx_ring,
+						     tx_ring->next_to_use);
+			else
+				writel(tx_ring->next_to_use, tx_ring->tail);
+
+			/* we need this if more than one processor can write
+			 * to our tail at a time, it synchronizes IO on
+			 *IA64/Altix systems
+			 */
+			mmiowb();
+		}
+	} else {
+		dev_kfree_skb_any(skb);
+		tx_ring->buffer_info[first].time_stamp = 0;
+		tx_ring->next_to_use = first;
+	}
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * e1000_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void e1000_tx_timeout(struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	/* Do the reset outside of interrupt context */
+	adapter->tx_timeout_count++;
+	schedule_work(&adapter->reset_task);
+}
+
+static void e1000_reset_task(struct work_struct *work)
+{
+	struct e1000_adapter *adapter;
+	adapter = container_of(work, struct e1000_adapter, reset_task);
+
+	/* don't run the task if already down */
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
+	if (!(adapter->flags & FLAG_RESTART_NOW)) {
+		e1000e_dump(adapter);
+		e_err("Reset adapter unexpectedly\n");
+	}
+	e1000e_reinit_locked(adapter);
+}
+
+/**
+ * e1000_get_stats64 - Get System Network Statistics
+ * @netdev: network interface device structure
+ * @stats: rtnl_link_stats64 pointer
+ *
+ * Returns the address of the device statistics structure.
+ **/
+struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
+					     struct rtnl_link_stats64 *stats)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	memset(stats, 0, sizeof(struct rtnl_link_stats64));
+	spin_lock(&adapter->stats64_lock);
+	e1000e_update_stats(adapter);
+	/* Fill out the OS statistics structure */
+	stats->rx_bytes = adapter->stats.gorc;
+	stats->rx_packets = adapter->stats.gprc;
+	stats->tx_bytes = adapter->stats.gotc;
+	stats->tx_packets = adapter->stats.gptc;
+	stats->multicast = adapter->stats.mprc;
+	stats->collisions = adapter->stats.colc;
+
+	/* Rx Errors */
+
+	/* RLEC on some newer hardware can be incorrect so build
+	 * our own version based on RUC and ROC
+	 */
+	stats->rx_errors = adapter->stats.rxerrc +
+	    adapter->stats.crcerrs + adapter->stats.algnerrc +
+	    adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr;
+	stats->rx_length_errors = adapter->stats.ruc + adapter->stats.roc;
+	stats->rx_crc_errors = adapter->stats.crcerrs;
+	stats->rx_frame_errors = adapter->stats.algnerrc;
+	stats->rx_missed_errors = adapter->stats.mpc;
+
+	/* Tx Errors */
+	stats->tx_errors = adapter->stats.ecol + adapter->stats.latecol;
+	stats->tx_aborted_errors = adapter->stats.ecol;
+	stats->tx_window_errors = adapter->stats.latecol;
+	stats->tx_carrier_errors = adapter->stats.tncrs;
+
+	/* Tx Dropped needs to be maintained elsewhere */
+
+	spin_unlock(&adapter->stats64_lock);
+	return stats;
+}
+
+/**
+ * e1000_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	int max_frame = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+	/* Jumbo frame support */
+	if ((max_frame > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) &&
+	    !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+		e_err("Jumbo Frames not supported.\n");
+		return -EINVAL;
+	}
+
+	/* Supported frame sizes */
+	if ((new_mtu < (VLAN_ETH_ZLEN + ETH_FCS_LEN)) ||
+	    (max_frame > adapter->max_hw_frame_size)) {
+		e_err("Unsupported MTU setting\n");
+		return -EINVAL;
+	}
+
+	/* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
+	if ((adapter->hw.mac.type >= e1000_pch2lan) &&
+	    !(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
+	    (new_mtu > ETH_DATA_LEN)) {
+		e_err("Jumbo Frames not supported on this device when CRC stripping is disabled.\n");
+		return -EINVAL;
+	}
+
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+		usleep_range(1000, 2000);
+	/* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
+	adapter->max_frame_size = max_frame;
+	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+	netdev->mtu = new_mtu;
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	if (netif_running(netdev))
+		e1000e_down(adapter, true);
+
+	/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+	 * means we reserve 2 more, this pushes us to allocate from the next
+	 * larger slab size.
+	 * i.e. RXBUFFER_2048 --> size-4096 slab
+	 * However with the new *_jumbo_rx* routines, jumbo receives will use
+	 * fragmented skbs
+	 */
+
+	if (max_frame <= 2048)
+		adapter->rx_buffer_len = 2048;
+	else
+		adapter->rx_buffer_len = 4096;
+
+	/* adjust allocation if LPE protects us, and we aren't using SBP */
+	if (max_frame <= (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN))
+		adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
+
+	if (netif_running(netdev))
+		e1000e_up(adapter);
+	else
+		e1000e_reset(adapter);
+
+	pm_runtime_put_sync(netdev->dev.parent);
+
+	clear_bit(__E1000_RESETTING, &adapter->state);
+
+	return 0;
+}
+
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+			   int cmd)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct mii_ioctl_data *data = if_mii(ifr);
+
+	if (adapter->hw.phy.media_type != e1000_media_type_copper)
+		return -EOPNOTSUPP;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		data->phy_id = adapter->hw.phy.addr;
+		break;
+	case SIOCGMIIREG:
+		e1000_phy_read_status(adapter);
+
+		switch (data->reg_num & 0x1F) {
+		case MII_BMCR:
+			data->val_out = adapter->phy_regs.bmcr;
+			break;
+		case MII_BMSR:
+			data->val_out = adapter->phy_regs.bmsr;
+			break;
+		case MII_PHYSID1:
+			data->val_out = (adapter->hw.phy.id >> 16);
+			break;
+		case MII_PHYSID2:
+			data->val_out = (adapter->hw.phy.id & 0xFFFF);
+			break;
+		case MII_ADVERTISE:
+			data->val_out = adapter->phy_regs.advertise;
+			break;
+		case MII_LPA:
+			data->val_out = adapter->phy_regs.lpa;
+			break;
+		case MII_EXPANSION:
+			data->val_out = adapter->phy_regs.expansion;
+			break;
+		case MII_CTRL1000:
+			data->val_out = adapter->phy_regs.ctrl1000;
+			break;
+		case MII_STAT1000:
+			data->val_out = adapter->phy_regs.stat1000;
+			break;
+		case MII_ESTATUS:
+			data->val_out = adapter->phy_regs.estatus;
+			break;
+		default:
+			return -EIO;
+		}
+		break;
+	case SIOCSMIIREG:
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+/**
+ * e1000e_hwtstamp_ioctl - control hardware time stamping
+ * @netdev: network interface device structure
+ * @ifreq: interface request
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't cause any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware filters.
+ * Not all combinations are supported, in particular event type has to be
+ * specified. Matching the kind of event packet is not supported, with the
+ * exception of "all V2 events regardless of level 2 or 4".
+ **/
+static int e1000e_hwtstamp_set(struct net_device *netdev, struct ifreq *ifr)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct hwtstamp_config config;
+	int ret_val;
+
+	if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+		return -EFAULT;
+
+	ret_val = e1000e_config_hwtstamp(adapter, &config);
+	if (ret_val)
+		return ret_val;
+
+	switch (config.rx_filter) {
+	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+		/* With V2 type filters which specify a Sync or Delay Request,
+		 * Path Delay Request/Response messages are also time stamped
+		 * by hardware so notify the caller the requested packets plus
+		 * some others are time stamped.
+		 */
+		config.rx_filter = HWTSTAMP_FILTER_SOME;
+		break;
+	default:
+		break;
+	}
+
+	return copy_to_user(ifr->ifr_data, &config,
+			    sizeof(config)) ? -EFAULT : 0;
+}
+
+static int e1000e_hwtstamp_get(struct net_device *netdev, struct ifreq *ifr)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	return copy_to_user(ifr->ifr_data, &adapter->hwtstamp_config,
+			    sizeof(adapter->hwtstamp_config)) ? -EFAULT : 0;
+}
+
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	switch (cmd) {
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		return e1000_mii_ioctl(netdev, ifr, cmd);
+	case SIOCSHWTSTAMP:
+		return e1000e_hwtstamp_set(netdev, ifr);
+	case SIOCGHWTSTAMP:
+		return e1000e_hwtstamp_get(netdev, ifr);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 i, mac_reg, wuc;
+	u16 phy_reg, wuc_enable;
+	int retval;
+
+	/* copy MAC RARs to PHY RARs */
+	e1000_copy_rx_addrs_to_phy_ich8lan(hw);
+
+	retval = hw->phy.ops.acquire(hw);
+	if (retval) {
+		e_err("Could not acquire PHY\n");
+		return retval;
+	}
+
+	/* Enable access to wakeup registers on and set page to BM_WUC_PAGE */
+	retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
+	if (retval)
+		goto release;
+
+	/* copy MAC MTA to PHY MTA - only needed for pchlan */
+	for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
+		mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
+		hw->phy.ops.write_reg_page(hw, BM_MTA(i),
+					   (u16)(mac_reg & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_MTA(i) + 1,
+					   (u16)((mac_reg >> 16) & 0xFFFF));
+	}
+
+	/* configure PHY Rx Control register */
+	hw->phy.ops.read_reg_page(&adapter->hw, BM_RCTL, &phy_reg);
+	mac_reg = er32(RCTL);
+	if (mac_reg & E1000_RCTL_UPE)
+		phy_reg |= BM_RCTL_UPE;
+	if (mac_reg & E1000_RCTL_MPE)
+		phy_reg |= BM_RCTL_MPE;
+	phy_reg &= ~(BM_RCTL_MO_MASK);
+	if (mac_reg & E1000_RCTL_MO_3)
+		phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
+			    << BM_RCTL_MO_SHIFT);
+	if (mac_reg & E1000_RCTL_BAM)
+		phy_reg |= BM_RCTL_BAM;
+	if (mac_reg & E1000_RCTL_PMCF)
+		phy_reg |= BM_RCTL_PMCF;
+	mac_reg = er32(CTRL);
+	if (mac_reg & E1000_CTRL_RFCE)
+		phy_reg |= BM_RCTL_RFCE;
+	hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg);
+
+	wuc = E1000_WUC_PME_EN;
+	if (wufc & (E1000_WUFC_MAG | E1000_WUFC_LNKC))
+		wuc |= E1000_WUC_APME;
+
+	/* enable PHY wakeup in MAC register */
+	ew32(WUFC, wufc);
+	ew32(WUC, (E1000_WUC_PHY_WAKE | E1000_WUC_APMPME |
+		   E1000_WUC_PME_STATUS | wuc));
+
+	/* configure and enable PHY wakeup in PHY registers */
+	hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc);
+	hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, wuc);
+
+	/* activate PHY wakeup */
+	wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
+	retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
+	if (retval)
+		e_err("Could not set PHY Host Wakeup bit\n");
+release:
+	hw->phy.ops.release(hw);
+
+	return retval;
+}
+
+static void e1000e_flush_lpic(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ret_val;
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto fl_out;
+
+	pr_info("EEE TX LPI TIMER: %08X\n",
+		er32(LPIC) >> E1000_LPIC_LPIET_SHIFT);
+
+	hw->phy.ops.release(hw);
+
+fl_out:
+	pm_runtime_put_sync(netdev->dev.parent);
+}
+
+static int e1000e_pm_freeze(struct device *dev)
+{
+	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	netif_device_detach(netdev);
+
+	if (netif_running(netdev)) {
+		int count = E1000_CHECK_RESET_COUNT;
+
+		while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
+			usleep_range(10000, 20000);
+
+		WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
+
+		/* Quiesce the device without resetting the hardware */
+		e1000e_down(adapter, false);
+		e1000_free_irq(adapter);
+	}
+	e1000e_reset_interrupt_capability(adapter);
+
+	/* Allow time for pending master requests to run */
+	e1000e_disable_pcie_master(&adapter->hw);
+
+	return 0;
+}
+
+static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl, ctrl_ext, rctl, status;
+	/* Runtime suspend should only enable wakeup for link changes */
+	u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
+	int retval = 0;
+
+	status = er32(STATUS);
+	if (status & E1000_STATUS_LU)
+		wufc &= ~E1000_WUFC_LNKC;
+
+	if (wufc) {
+		e1000_setup_rctl(adapter);
+		e1000e_set_rx_mode(netdev);
+
+		/* turn on all-multi mode if wake on multicast is enabled */
+		if (wufc & E1000_WUFC_MC) {
+			rctl = er32(RCTL);
+			rctl |= E1000_RCTL_MPE;
+			ew32(RCTL, rctl);
+		}
+
+		ctrl = er32(CTRL);
+		ctrl |= E1000_CTRL_ADVD3WUC;
+		if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
+			ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
+		ew32(CTRL, ctrl);
+
+		if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
+		    adapter->hw.phy.media_type ==
+		    e1000_media_type_internal_serdes) {
+			/* keep the laser running in D3 */
+			ctrl_ext = er32(CTRL_EXT);
+			ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA;
+			ew32(CTRL_EXT, ctrl_ext);
+		}
+
+		if (!runtime)
+			e1000e_power_up_phy(adapter);
+
+		if (adapter->flags & FLAG_IS_ICH)
+			e1000_suspend_workarounds_ich8lan(&adapter->hw);
+
+		if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
+			/* enable wakeup by the PHY */
+			retval = e1000_init_phy_wakeup(adapter, wufc);
+			if (retval)
+				return retval;
+		} else {
+			/* enable wakeup by the MAC */
+			ew32(WUFC, wufc);
+			ew32(WUC, E1000_WUC_PME_EN);
+		}
+	} else {
+		ew32(WUC, 0);
+		ew32(WUFC, 0);
+
+		e1000_power_down_phy(adapter);
+	}
+
+	if (adapter->hw.phy.type == e1000_phy_igp_3) {
+		e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
+	} else if ((hw->mac.type == e1000_pch_lpt) ||
+		   (hw->mac.type == e1000_pch_spt)) {
+		if (!(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC)))
+			/* ULP does not support wake from unicast, multicast
+			 * or broadcast.
+			 */
+			retval = e1000_enable_ulp_lpt_lp(hw, !runtime);
+
+		if (retval)
+			return retval;
+	}
+
+
+	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
+	 * would have already happened in close and is redundant.
+	 */
+	e1000e_release_hw_control(adapter);
+
+	pci_clear_master(pdev);
+
+	/* The pci-e switch on some quad port adapters will report a
+	 * correctable error when the MAC transitions from D0 to D3.  To
+	 * prevent this we need to mask off the correctable errors on the
+	 * downstream port of the pci-e switch.
+	 *
+	 * We don't have the associated upstream bridge while assigning
+	 * the PCI device into guest. For example, the KVM on power is
+	 * one of the cases.
+	 */
+	if (adapter->flags & FLAG_IS_QUAD_PORT) {
+		struct pci_dev *us_dev = pdev->bus->self;
+		u16 devctl;
+
+		if (!us_dev)
+			return 0;
+
+		pcie_capability_read_word(us_dev, PCI_EXP_DEVCTL, &devctl);
+		pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL,
+					   (devctl & ~PCI_EXP_DEVCTL_CERE));
+
+		pci_save_state(pdev);
+		pci_prepare_to_sleep(pdev);
+
+		pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl);
+	}
+
+	return 0;
+}
+
+/**
+ * e1000e_disable_aspm - Disable ASPM states
+ * @pdev: pointer to PCI device struct
+ * @state: bit-mask of ASPM states to disable
+ *
+ * Some devices *must* have certain ASPM states disabled per hardware errata.
+ **/
+static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+{
+	struct pci_dev *parent = pdev->bus->self;
+	u16 aspm_dis_mask = 0;
+	u16 pdev_aspmc, parent_aspmc;
+
+	switch (state) {
+	case PCIE_LINK_STATE_L0S:
+	case PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1:
+		aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L0S;
+		/* fall-through - can't have L1 without L0s */
+	case PCIE_LINK_STATE_L1:
+		aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L1;
+		break;
+	default:
+		return;
+	}
+
+	pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc);
+	pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC;
+
+	if (parent) {
+		pcie_capability_read_word(parent, PCI_EXP_LNKCTL,
+					  &parent_aspmc);
+		parent_aspmc &= PCI_EXP_LNKCTL_ASPMC;
+	}
+
+	/* Nothing to do if the ASPM states to be disabled already are */
+	if (!(pdev_aspmc & aspm_dis_mask) &&
+	    (!parent || !(parent_aspmc & aspm_dis_mask)))
+		return;
+
+	dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
+		 (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L0S) ?
+		 "L0s" : "",
+		 (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L1) ?
+		 "L1" : "");
+
+#ifdef CONFIG_PCIEASPM
+	pci_disable_link_state_locked(pdev, state);
+
+	/* Double-check ASPM control.  If not disabled by the above, the
+	 * BIOS is preventing that from happening (or CONFIG_PCIEASPM is
+	 * not enabled); override by writing PCI config space directly.
+	 */
+	pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc);
+	pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC;
+
+	if (!(aspm_dis_mask & pdev_aspmc))
+		return;
+#endif
+
+	/* Both device and parent should have the same ASPM setting.
+	 * Disable ASPM in downstream component first and then upstream.
+	 */
+	pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_dis_mask);
+
+	if (parent)
+		pcie_capability_clear_word(parent, PCI_EXP_LNKCTL,
+					   aspm_dis_mask);
+}
+
+#ifdef CONFIG_PM
+static int __e1000_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 aspm_disable_flag = 0;
+
+	if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
+		aspm_disable_flag = PCIE_LINK_STATE_L0S;
+	if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
+		aspm_disable_flag |= PCIE_LINK_STATE_L1;
+	if (aspm_disable_flag)
+		e1000e_disable_aspm(pdev, aspm_disable_flag);
+
+	pci_set_master(pdev);
+
+	if (hw->mac.type >= e1000_pch2lan)
+		e1000_resume_workarounds_pchlan(&adapter->hw);
+
+	e1000e_power_up_phy(adapter);
+
+	/* report the system wakeup cause from S3/S4 */
+	if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
+		u16 phy_data;
+
+		e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
+		if (phy_data) {
+			e_info("PHY Wakeup cause - %s\n",
+			       phy_data & E1000_WUS_EX ? "Unicast Packet" :
+			       phy_data & E1000_WUS_MC ? "Multicast Packet" :
+			       phy_data & E1000_WUS_BC ? "Broadcast Packet" :
+			       phy_data & E1000_WUS_MAG ? "Magic Packet" :
+			       phy_data & E1000_WUS_LNKC ?
+			       "Link Status Change" : "other");
+		}
+		e1e_wphy(&adapter->hw, BM_WUS, ~0);
+	} else {
+		u32 wus = er32(WUS);
+
+		if (wus) {
+			e_info("MAC Wakeup cause - %s\n",
+			       wus & E1000_WUS_EX ? "Unicast Packet" :
+			       wus & E1000_WUS_MC ? "Multicast Packet" :
+			       wus & E1000_WUS_BC ? "Broadcast Packet" :
+			       wus & E1000_WUS_MAG ? "Magic Packet" :
+			       wus & E1000_WUS_LNKC ? "Link Status Change" :
+			       "other");
+		}
+		ew32(WUS, ~0);
+	}
+
+	e1000e_reset(adapter);
+
+	e1000_init_manageability_pt(adapter);
+
+	/* If the controller has AMT, do not set DRV_LOAD until the interface
+	 * is up.  For all other cases, let the f/w know that the h/w is now
+	 * under the control of the driver.
+	 */
+	if (!(adapter->flags & FLAG_HAS_AMT))
+		e1000e_get_hw_control(adapter);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int e1000e_pm_thaw(struct device *dev)
+{
+	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	e1000e_set_interrupt_capability(adapter);
+	if (netif_running(netdev)) {
+		u32 err = e1000_request_irq(adapter);
+
+		if (err)
+			return err;
+
+		e1000e_up(adapter);
+	}
+
+	netif_device_attach(netdev);
+
+	return 0;
+}
+
+static int e1000e_pm_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	e1000e_flush_lpic(pdev);
+
+	e1000e_pm_freeze(dev);
+
+	return __e1000_shutdown(pdev, false);
+}
+
+static int e1000e_pm_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	int rc;
+
+	rc = __e1000_resume(pdev);
+	if (rc)
+		return rc;
+
+	return e1000e_pm_thaw(dev);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static int e1000e_pm_runtime_idle(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	u16 eee_lp;
+
+	eee_lp = adapter->hw.dev_spec.ich8lan.eee_lp_ability;
+
+	if (!e1000e_has_link(adapter)) {
+		adapter->hw.dev_spec.ich8lan.eee_lp_ability = eee_lp;
+		pm_schedule_suspend(dev, 5 * MSEC_PER_SEC);
+	}
+
+	return -EBUSY;
+}
+
+static int e1000e_pm_runtime_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	int rc;
+
+	rc = __e1000_resume(pdev);
+	if (rc)
+		return rc;
+
+	if (netdev->flags & IFF_UP)
+		rc = e1000e_up(adapter);
+
+	return rc;
+}
+
+static int e1000e_pm_runtime_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	if (netdev->flags & IFF_UP) {
+		int count = E1000_CHECK_RESET_COUNT;
+
+		while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
+			usleep_range(10000, 20000);
+
+		WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
+
+		/* Down the device without resetting the hardware */
+		e1000e_down(adapter, false);
+	}
+
+	if (__e1000_shutdown(pdev, true)) {
+		e1000e_pm_runtime_resume(dev);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+	e1000e_flush_lpic(pdev);
+
+	e1000e_pm_freeze(&pdev->dev);
+
+	__e1000_shutdown(pdev, false);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+
+static irqreturn_t e1000_intr_msix(int __always_unused irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	if (adapter->msix_entries) {
+		int vector, msix_irq;
+
+		vector = 0;
+		msix_irq = adapter->msix_entries[vector].vector;
+		disable_irq(msix_irq);
+		e1000_intr_msix_rx(msix_irq, netdev);
+		enable_irq(msix_irq);
+
+		vector++;
+		msix_irq = adapter->msix_entries[vector].vector;
+		disable_irq(msix_irq);
+		e1000_intr_msix_tx(msix_irq, netdev);
+		enable_irq(msix_irq);
+
+		vector++;
+		msix_irq = adapter->msix_entries[vector].vector;
+		disable_irq(msix_irq);
+		e1000_msix_other(msix_irq, netdev);
+		enable_irq(msix_irq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * e1000_netpoll
+ * @netdev: network interface device structure
+ *
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void e1000_netpoll(struct net_device *netdev)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	switch (adapter->int_mode) {
+	case E1000E_INT_MODE_MSIX:
+		e1000_intr_msix(adapter->pdev->irq, netdev);
+		break;
+	case E1000E_INT_MODE_MSI:
+		disable_irq(adapter->pdev->irq);
+		e1000_intr_msi(adapter->pdev->irq, netdev);
+		enable_irq(adapter->pdev->irq);
+		break;
+	default:		/* E1000E_INT_MODE_LEGACY */
+		disable_irq(adapter->pdev->irq);
+		e1000_intr(adapter->pdev->irq, netdev);
+		enable_irq(adapter->pdev->irq);
+		break;
+	}
+}
+#endif
+
+/**
+ * e1000_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+						pci_channel_state_t state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	netif_device_detach(netdev);
+
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	if (netif_running(netdev))
+		e1000e_down(adapter, true);
+	pci_disable_device(pdev);
+
+	/* Request a slot slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e1000_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000e_pm_resume routine.
+ */
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 aspm_disable_flag = 0;
+	int err;
+	pci_ers_result_t result;
+
+	if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
+		aspm_disable_flag = PCIE_LINK_STATE_L0S;
+	if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
+		aspm_disable_flag |= PCIE_LINK_STATE_L1;
+	if (aspm_disable_flag)
+		e1000e_disable_aspm(pdev, aspm_disable_flag);
+
+	err = pci_enable_device_mem(pdev);
+	if (err) {
+		dev_err(&pdev->dev,
+			"Cannot re-enable PCI device after reset.\n");
+		result = PCI_ERS_RESULT_DISCONNECT;
+	} else {
+		pdev->state_saved = true;
+		pci_restore_state(pdev);
+		pci_set_master(pdev);
+
+		pci_enable_wake(pdev, PCI_D3hot, 0);
+		pci_enable_wake(pdev, PCI_D3cold, 0);
+
+		e1000e_reset(adapter);
+		ew32(WUS, ~0);
+		result = PCI_ERS_RESULT_RECOVERED;
+	}
+
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+
+	return result;
+}
+
+/**
+ * e1000_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the e1000e_pm_resume routine.
+ */
+static void e1000_io_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	e1000_init_manageability_pt(adapter);
+
+	if (netif_running(netdev)) {
+		if (e1000e_up(adapter)) {
+			dev_err(&pdev->dev,
+				"can't bring device back up after reset\n");
+			return;
+		}
+	}
+
+	netif_device_attach(netdev);
+
+	/* If the controller has AMT, do not set DRV_LOAD until the interface
+	 * is up.  For all other cases, let the f/w know that the h/w is now
+	 * under the control of the driver.
+	 */
+	if (!(adapter->flags & FLAG_HAS_AMT))
+		e1000e_get_hw_control(adapter);
+}
+
+static void e1000_print_device_info(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	u32 ret_val;
+	u8 pba_str[E1000_PBANUM_LENGTH];
+
+	/* print bus type/speed/width info */
+	e_info("(PCI Express:2.5GT/s:%s) %pM\n",
+	       /* bus width */
+	       ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
+		"Width x1"),
+	       /* MAC address */
+	       netdev->dev_addr);
+	e_info("Intel(R) PRO/%s Network Connection\n",
+	       (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
+	ret_val = e1000_read_pba_string_generic(hw, pba_str,
+						E1000_PBANUM_LENGTH);
+	if (ret_val)
+		strlcpy((char *)pba_str, "Unknown", sizeof(pba_str));
+	e_info("MAC: %d, PHY: %d, PBA No: %s\n",
+	       hw->mac.type, hw->phy.type, pba_str);
+}
+
+static void e1000_eeprom_checks(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	int ret_val;
+	u16 buf = 0;
+
+	if (hw->mac.type != e1000_82573)
+		return;
+
+	ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
+	le16_to_cpus(&buf);
+	if (!ret_val && (!(buf & (1 << 0)))) {
+		/* Deep Smart Power Down (DSPD) */
+		dev_warn(&adapter->pdev->dev,
+			 "Warning: detected DSPD enabled in EEPROM\n");
+	}
+}
+
+static int e1000_set_features(struct net_device *netdev,
+			      netdev_features_t features)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	netdev_features_t changed = features ^ netdev->features;
+
+	if (changed & (NETIF_F_TSO | NETIF_F_TSO6))
+		adapter->flags |= FLAG_TSO_FORCE;
+
+	if (!(changed & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX |
+			 NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_RXFCS |
+			 NETIF_F_RXALL)))
+		return 0;
+
+	if (changed & NETIF_F_RXFCS) {
+		if (features & NETIF_F_RXFCS) {
+			adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
+		} else {
+			/* We need to take it back to defaults, which might mean
+			 * stripping is still disabled at the adapter level.
+			 */
+			if (adapter->flags2 & FLAG2_DFLT_CRC_STRIPPING)
+				adapter->flags2 |= FLAG2_CRC_STRIPPING;
+			else
+				adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
+		}
+	}
+
+	netdev->features = features;
+
+	if (netif_running(netdev))
+		e1000e_reinit_locked(adapter);
+	else
+		e1000e_reset(adapter);
+
+	return 0;
+}
+
+static const struct net_device_ops e1000e_netdev_ops = {
+	.ndo_open		= e1000_open,
+	.ndo_stop		= e1000_close,
+	.ndo_start_xmit		= e1000_xmit_frame,
+	.ndo_get_stats64	= e1000e_get_stats64,
+	.ndo_set_rx_mode	= e1000e_set_rx_mode,
+	.ndo_set_mac_address	= e1000_set_mac,
+	.ndo_change_mtu		= e1000_change_mtu,
+	.ndo_do_ioctl		= e1000_ioctl,
+	.ndo_tx_timeout		= e1000_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+
+	.ndo_vlan_rx_add_vid	= e1000_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= e1000_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= e1000_netpoll,
+#endif
+	.ndo_set_features = e1000_set_features,
+};
+
+/**
+ * e1000_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in e1000_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * e1000_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct net_device *netdev;
+	struct e1000_adapter *adapter;
+	struct e1000_hw *hw;
+	const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
+	resource_size_t mmio_start, mmio_len;
+	resource_size_t flash_start, flash_len;
+	static int cards_found;
+	u16 aspm_disable_flag = 0;
+	int bars, i, err, pci_using_dac;
+	u16 eeprom_data = 0;
+	u16 eeprom_apme_mask = E1000_EEPROM_APME;
+	s32 rval = 0;
+
+	if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S)
+		aspm_disable_flag = PCIE_LINK_STATE_L0S;
+	if (ei->flags2 & FLAG2_DISABLE_ASPM_L1)
+		aspm_disable_flag |= PCIE_LINK_STATE_L1;
+	if (aspm_disable_flag)
+		e1000e_disable_aspm(pdev, aspm_disable_flag);
+
+	err = pci_enable_device_mem(pdev);
+	if (err)
+		return err;
+
+	pci_using_dac = 0;
+	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (!err) {
+		pci_using_dac = 1;
+	} else {
+		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+		if (err) {
+			dev_err(&pdev->dev,
+				"No usable DMA configuration, aborting\n");
+			goto err_dma;
+		}
+	}
+
+	bars = pci_select_bars(pdev, IORESOURCE_MEM);
+	err = pci_request_selected_regions_exclusive(pdev, bars,
+						     e1000e_driver_name);
+	if (err)
+		goto err_pci_reg;
+
+	/* AER (Advanced Error Reporting) hooks */
+	pci_enable_pcie_error_reporting(pdev);
+
+	pci_set_master(pdev);
+	/* PCI config space info */
+	err = pci_save_state(pdev);
+	if (err)
+		goto err_alloc_etherdev;
+
+	err = -ENOMEM;
+	netdev = alloc_etherdev(sizeof(struct e1000_adapter));
+	if (!netdev)
+		goto err_alloc_etherdev;
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+
+	netdev->irq = pdev->irq;
+
+	pci_set_drvdata(pdev, netdev);
+	adapter = netdev_priv(netdev);
+	hw = &adapter->hw;
+	adapter->netdev = netdev;
+	adapter->pdev = pdev;
+	adapter->ei = ei;
+	adapter->pba = ei->pba;
+	adapter->flags = ei->flags;
+	adapter->flags2 = ei->flags2;
+	adapter->hw.adapter = adapter;
+	adapter->hw.mac.type = ei->mac;
+	adapter->max_hw_frame_size = ei->max_hw_frame_size;
+	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
+
+	mmio_start = pci_resource_start(pdev, 0);
+	mmio_len = pci_resource_len(pdev, 0);
+
+	err = -EIO;
+	adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
+	if (!adapter->hw.hw_addr)
+		goto err_ioremap;
+
+	if ((adapter->flags & FLAG_HAS_FLASH) &&
+	    (pci_resource_flags(pdev, 1) & IORESOURCE_MEM) &&
+	    (hw->mac.type < e1000_pch_spt)) {
+		flash_start = pci_resource_start(pdev, 1);
+		flash_len = pci_resource_len(pdev, 1);
+		adapter->hw.flash_address = ioremap(flash_start, flash_len);
+		if (!adapter->hw.flash_address)
+			goto err_flashmap;
+	}
+
+	/* Set default EEE advertisement */
+	if (adapter->flags2 & FLAG2_HAS_EEE)
+		adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
+
+	/* construct the net_device struct */
+	netdev->netdev_ops = &e1000e_netdev_ops;
+	e1000e_set_ethtool_ops(netdev);
+	netdev->watchdog_timeo = 5 * HZ;
+	netif_napi_add(netdev, &adapter->napi, e1000e_poll, 64);
+	strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
+
+	netdev->mem_start = mmio_start;
+	netdev->mem_end = mmio_start + mmio_len;
+
+	adapter->bd_number = cards_found++;
+
+	e1000e_check_options(adapter);
+
+	/* setup adapter struct */
+	err = e1000_sw_init(adapter);
+	if (err)
+		goto err_sw_init;
+
+	memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
+	memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
+	memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
+
+	err = ei->get_variants(adapter);
+	if (err)
+		goto err_hw_init;
+
+	if ((adapter->flags & FLAG_IS_ICH) &&
+	    (adapter->flags & FLAG_READ_ONLY_NVM) &&
+	    (hw->mac.type < e1000_pch_spt))
+		e1000e_write_protect_nvm_ich8lan(&adapter->hw);
+
+	hw->mac.ops.get_bus_info(&adapter->hw);
+
+	adapter->hw.phy.autoneg_wait_to_complete = 0;
+
+	/* Copper options */
+	if (adapter->hw.phy.media_type == e1000_media_type_copper) {
+		adapter->hw.phy.mdix = AUTO_ALL_MODES;
+		adapter->hw.phy.disable_polarity_correction = 0;
+		adapter->hw.phy.ms_type = e1000_ms_hw_default;
+	}
+
+	if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
+		dev_info(&pdev->dev,
+			 "PHY reset is blocked due to SOL/IDER session.\n");
+
+	/* Set initial default active device features */
+	netdev->features = (NETIF_F_SG |
+			    NETIF_F_HW_VLAN_CTAG_RX |
+			    NETIF_F_HW_VLAN_CTAG_TX |
+			    NETIF_F_TSO |
+			    NETIF_F_TSO6 |
+			    NETIF_F_RXHASH |
+			    NETIF_F_RXCSUM |
+			    NETIF_F_HW_CSUM);
+
+	/* Set user-changeable features (subset of all device features) */
+	netdev->hw_features = netdev->features;
+	netdev->hw_features |= NETIF_F_RXFCS;
+	netdev->priv_flags |= IFF_SUPP_NOFCS;
+	netdev->hw_features |= NETIF_F_RXALL;
+
+	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
+		netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+
+	netdev->vlan_features |= (NETIF_F_SG |
+				  NETIF_F_TSO |
+				  NETIF_F_TSO6 |
+				  NETIF_F_HW_CSUM);
+
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+
+	if (pci_using_dac) {
+		netdev->features |= NETIF_F_HIGHDMA;
+		netdev->vlan_features |= NETIF_F_HIGHDMA;
+	}
+
+	if (e1000e_enable_mng_pass_thru(&adapter->hw))
+		adapter->flags |= FLAG_MNG_PT_ENABLED;
+
+	/* before reading the NVM, reset the controller to
+	 * put the device in a known good starting state
+	 */
+	adapter->hw.mac.ops.reset_hw(&adapter->hw);
+
+	/* systems with ASPM and others may see the checksum fail on the first
+	 * attempt. Let's give it a few tries
+	 */
+	for (i = 0;; i++) {
+		if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
+			break;
+		if (i == 2) {
+			dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
+			err = -EIO;
+			goto err_eeprom;
+		}
+	}
+
+	e1000_eeprom_checks(adapter);
+
+	/* copy the MAC address */
+	if (e1000e_read_mac_addr(&adapter->hw))
+		dev_err(&pdev->dev,
+			"NVM Read Error while reading MAC address\n");
+
+	memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
+
+	if (!is_valid_ether_addr(netdev->dev_addr)) {
+		dev_err(&pdev->dev, "Invalid MAC Address: %pM\n",
+			netdev->dev_addr);
+		err = -EIO;
+		goto err_eeprom;
+	}
+
+	init_timer(&adapter->watchdog_timer);
+	adapter->watchdog_timer.function = e1000_watchdog;
+	adapter->watchdog_timer.data = (unsigned long)adapter;
+
+	init_timer(&adapter->phy_info_timer);
+	adapter->phy_info_timer.function = e1000_update_phy_info;
+	adapter->phy_info_timer.data = (unsigned long)adapter;
+
+	INIT_WORK(&adapter->reset_task, e1000_reset_task);
+	INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
+	INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
+	INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
+	INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
+
+	/* Initialize link parameters. User can change them with ethtool */
+	adapter->hw.mac.autoneg = 1;
+	adapter->fc_autoneg = true;
+	adapter->hw.fc.requested_mode = e1000_fc_default;
+	adapter->hw.fc.current_mode = e1000_fc_default;
+	adapter->hw.phy.autoneg_advertised = 0x2f;
+
+	/* Initial Wake on LAN setting - If APM wake is enabled in
+	 * the EEPROM, enable the ACPI Magic Packet filter
+	 */
+	if (adapter->flags & FLAG_APME_IN_WUC) {
+		/* APME bit in EEPROM is mapped to WUC.APME */
+		eeprom_data = er32(WUC);
+		eeprom_apme_mask = E1000_WUC_APME;
+		if ((hw->mac.type > e1000_ich10lan) &&
+		    (eeprom_data & E1000_WUC_PHY_WAKE))
+			adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
+	} else if (adapter->flags & FLAG_APME_IN_CTRL3) {
+		if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
+		    (adapter->hw.bus.func == 1))
+			rval = e1000_read_nvm(&adapter->hw,
+					      NVM_INIT_CONTROL3_PORT_B,
+					      1, &eeprom_data);
+		else
+			rval = e1000_read_nvm(&adapter->hw,
+					      NVM_INIT_CONTROL3_PORT_A,
+					      1, &eeprom_data);
+	}
+
+	/* fetch WoL from EEPROM */
+	if (rval)
+		e_dbg("NVM read error getting WoL initial values: %d\n", rval);
+	else if (eeprom_data & eeprom_apme_mask)
+		adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+	/* now that we have the eeprom settings, apply the special cases
+	 * where the eeprom may be wrong or the board simply won't support
+	 * wake on lan on a particular port
+	 */
+	if (!(adapter->flags & FLAG_HAS_WOL))
+		adapter->eeprom_wol = 0;
+
+	/* initialize the wol settings based on the eeprom settings */
+	adapter->wol = adapter->eeprom_wol;
+
+	/* make sure adapter isn't asleep if manageability is enabled */
+	if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) ||
+	    (hw->mac.ops.check_mng_mode(hw)))
+		device_wakeup_enable(&pdev->dev);
+
+	/* save off EEPROM version number */
+	rval = e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
+
+	if (rval) {
+		e_dbg("NVM read error getting EEPROM version: %d\n", rval);
+		adapter->eeprom_vers = 0;
+	}
+
+	/* reset the hardware with the new settings */
+	e1000e_reset(adapter);
+
+	/* If the controller has AMT, do not set DRV_LOAD until the interface
+	 * is up.  For all other cases, let the f/w know that the h/w is now
+	 * under the control of the driver.
+	 */
+	if (!(adapter->flags & FLAG_HAS_AMT))
+		e1000e_get_hw_control(adapter);
+
+	strlcpy(netdev->name, "eth%d", sizeof(netdev->name));
+	err = register_netdev(netdev);
+	if (err)
+		goto err_register;
+
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+
+	/* init PTP hardware clock */
+	e1000e_ptp_init(adapter);
+
+	e1000_print_device_info(adapter);
+
+	if (pci_dev_run_wake(pdev))
+		pm_runtime_put_noidle(&pdev->dev);
+
+	return 0;
+
+err_register:
+	if (!(adapter->flags & FLAG_HAS_AMT))
+		e1000e_release_hw_control(adapter);
+err_eeprom:
+	if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw))
+		e1000_phy_hw_reset(&adapter->hw);
+err_hw_init:
+	kfree(adapter->tx_ring);
+	kfree(adapter->rx_ring);
+err_sw_init:
+	if ((adapter->hw.flash_address) && (hw->mac.type < e1000_pch_spt))
+		iounmap(adapter->hw.flash_address);
+	e1000e_reset_interrupt_capability(adapter);
+err_flashmap:
+	iounmap(adapter->hw.hw_addr);
+err_ioremap:
+	free_netdev(netdev);
+err_alloc_etherdev:
+	pci_release_selected_regions(pdev,
+				     pci_select_bars(pdev, IORESOURCE_MEM));
+err_pci_reg:
+err_dma:
+	pci_disable_device(pdev);
+	return err;
+}
+
+/**
+ * e1000_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * e1000_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.  The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void e1000_remove(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	bool down = test_bit(__E1000_DOWN, &adapter->state);
+
+	e1000e_ptp_remove(adapter);
+
+	/* The timers may be rescheduled, so explicitly disable them
+	 * from being rescheduled.
+	 */
+	if (!down)
+		set_bit(__E1000_DOWN, &adapter->state);
+	del_timer_sync(&adapter->watchdog_timer);
+	del_timer_sync(&adapter->phy_info_timer);
+
+	cancel_work_sync(&adapter->reset_task);
+	cancel_work_sync(&adapter->watchdog_task);
+	cancel_work_sync(&adapter->downshift_task);
+	cancel_work_sync(&adapter->update_phy_task);
+	cancel_work_sync(&adapter->print_hang_task);
+
+	if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
+		cancel_work_sync(&adapter->tx_hwtstamp_work);
+		if (adapter->tx_hwtstamp_skb) {
+			dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+			adapter->tx_hwtstamp_skb = NULL;
+		}
+	}
+
+	/* Don't lie to e1000_close() down the road. */
+	if (!down)
+		clear_bit(__E1000_DOWN, &adapter->state);
+	unregister_netdev(netdev);
+
+	if (pci_dev_run_wake(pdev))
+		pm_runtime_get_noresume(&pdev->dev);
+
+	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
+	 * would have already happened in close and is redundant.
+	 */
+	e1000e_release_hw_control(adapter);
+
+	e1000e_reset_interrupt_capability(adapter);
+	kfree(adapter->tx_ring);
+	kfree(adapter->rx_ring);
+
+	iounmap(adapter->hw.hw_addr);
+	if ((adapter->hw.flash_address) &&
+	    (adapter->hw.mac.type < e1000_pch_spt))
+		iounmap(adapter->hw.flash_address);
+	pci_release_selected_regions(pdev,
+				     pci_select_bars(pdev, IORESOURCE_MEM));
+
+	free_netdev(netdev);
+
+	/* AER disable */
+	pci_disable_pcie_error_reporting(pdev);
+
+	pci_disable_device(pdev);
+}
+
+/* PCI Error Recovery (ERS) */
+static const struct pci_error_handlers e1000_err_handler = {
+	.error_detected = e1000_io_error_detected,
+	.slot_reset = e1000_io_slot_reset,
+	.resume = e1000_io_resume,
+};
+
+static const struct pci_device_id e1000_pci_tbl[] = {
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP),
+	  board_82571 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
+	  board_80003es2lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
+	  board_80003es2lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
+	  board_80003es2lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
+	  board_80003es2lan },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_LM), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_LM), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_V), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM2), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V2), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM3), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V3), board_pch_lpt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM), board_pch_spt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V), board_pch_spt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM2), board_pch_spt },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V2), board_pch_spt },
+
+	{ 0, 0, 0, 0, 0, 0, 0 }	/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
+
+static const struct dev_pm_ops e1000_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+	.suspend	= e1000e_pm_suspend,
+	.resume		= e1000e_pm_resume,
+	.freeze		= e1000e_pm_freeze,
+	.thaw		= e1000e_pm_thaw,
+	.poweroff	= e1000e_pm_suspend,
+	.restore	= e1000e_pm_resume,
+#endif
+	SET_RUNTIME_PM_OPS(e1000e_pm_runtime_suspend, e1000e_pm_runtime_resume,
+			   e1000e_pm_runtime_idle)
+};
+
+/* PCI Device API Driver */
+static struct pci_driver e1000_driver = {
+	.name     = e1000e_driver_name,
+	.id_table = e1000_pci_tbl,
+	.probe    = e1000_probe,
+	.remove   = e1000_remove,
+	.driver   = {
+		.pm = &e1000_pm_ops,
+	},
+	.shutdown = e1000_shutdown,
+	.err_handler = &e1000_err_handler
+};
+
+/**
+ * e1000_init_module - Driver Registration Routine
+ *
+ * e1000_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init e1000_init_module(void)
+{
+	int ret;
+
+	pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
+		e1000e_driver_version);
+	pr_info("Copyright(c) 1999 - 2014 Intel Corporation.\n");
+	ret = pci_register_driver(&e1000_driver);
+
+	return ret;
+}
+module_init(e1000_init_module);
+
+/**
+ * e1000_exit_module - Driver Exit Cleanup Routine
+ *
+ * e1000_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit e1000_exit_module(void)
+{
+	pci_unregister_driver(&e1000_driver);
+}
+module_exit(e1000_exit_module);
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+/* netdev.c */
diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c
new file mode 100644
index 000000000..fa6b1036a
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/nvm.c
@@ -0,0 +1,633 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include "e1000.h"
+
+/**
+ *  e1000_raise_eec_clk - Raise EEPROM clock
+ *  @hw: pointer to the HW structure
+ *  @eecd: pointer to the EEPROM
+ *
+ *  Enable/Raise the EEPROM clock bit.
+ **/
+static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+	*eecd = *eecd | E1000_EECD_SK;
+	ew32(EECD, *eecd);
+	e1e_flush();
+	udelay(hw->nvm.delay_usec);
+}
+
+/**
+ *  e1000_lower_eec_clk - Lower EEPROM clock
+ *  @hw: pointer to the HW structure
+ *  @eecd: pointer to the EEPROM
+ *
+ *  Clear/Lower the EEPROM clock bit.
+ **/
+static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+	*eecd = *eecd & ~E1000_EECD_SK;
+	ew32(EECD, *eecd);
+	e1e_flush();
+	udelay(hw->nvm.delay_usec);
+}
+
+/**
+ *  e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
+ *  @hw: pointer to the HW structure
+ *  @data: data to send to the EEPROM
+ *  @count: number of bits to shift out
+ *
+ *  We need to shift 'count' bits out to the EEPROM.  So, the value in the
+ *  "data" parameter will be shifted out to the EEPROM one bit at a time.
+ *  In order to do this, "data" must be broken down into bits.
+ **/
+static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = er32(EECD);
+	u32 mask;
+
+	mask = 0x01 << (count - 1);
+	if (nvm->type == e1000_nvm_eeprom_spi)
+		eecd |= E1000_EECD_DO;
+
+	do {
+		eecd &= ~E1000_EECD_DI;
+
+		if (data & mask)
+			eecd |= E1000_EECD_DI;
+
+		ew32(EECD, eecd);
+		e1e_flush();
+
+		udelay(nvm->delay_usec);
+
+		e1000_raise_eec_clk(hw, &eecd);
+		e1000_lower_eec_clk(hw, &eecd);
+
+		mask >>= 1;
+	} while (mask);
+
+	eecd &= ~E1000_EECD_DI;
+	ew32(EECD, eecd);
+}
+
+/**
+ *  e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
+ *  @hw: pointer to the HW structure
+ *  @count: number of bits to shift in
+ *
+ *  In order to read a register from the EEPROM, we need to shift 'count' bits
+ *  in from the EEPROM.  Bits are "shifted in" by raising the clock input to
+ *  the EEPROM (setting the SK bit), and then reading the value of the data out
+ *  "DO" bit.  During this "shifting in" process the data in "DI" bit should
+ *  always be clear.
+ **/
+static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
+{
+	u32 eecd;
+	u32 i;
+	u16 data;
+
+	eecd = er32(EECD);
+	eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+	data = 0;
+
+	for (i = 0; i < count; i++) {
+		data <<= 1;
+		e1000_raise_eec_clk(hw, &eecd);
+
+		eecd = er32(EECD);
+
+		eecd &= ~E1000_EECD_DI;
+		if (eecd & E1000_EECD_DO)
+			data |= 1;
+
+		e1000_lower_eec_clk(hw, &eecd);
+	}
+
+	return data;
+}
+
+/**
+ *  e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ *  @hw: pointer to the HW structure
+ *  @ee_reg: EEPROM flag for polling
+ *
+ *  Polls the EEPROM status bit for either read or write completion based
+ *  upon the value of 'ee_reg'.
+ **/
+s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+{
+	u32 attempts = 100000;
+	u32 i, reg = 0;
+
+	for (i = 0; i < attempts; i++) {
+		if (ee_reg == E1000_NVM_POLL_READ)
+			reg = er32(EERD);
+		else
+			reg = er32(EEWR);
+
+		if (reg & E1000_NVM_RW_REG_DONE)
+			return 0;
+
+		udelay(5);
+	}
+
+	return -E1000_ERR_NVM;
+}
+
+/**
+ *  e1000e_acquire_nvm - Generic request for access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ *  Return successful if access grant bit set, else clear the request for
+ *  EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+s32 e1000e_acquire_nvm(struct e1000_hw *hw)
+{
+	u32 eecd = er32(EECD);
+	s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
+
+	ew32(EECD, eecd | E1000_EECD_REQ);
+	eecd = er32(EECD);
+
+	while (timeout) {
+		if (eecd & E1000_EECD_GNT)
+			break;
+		udelay(5);
+		eecd = er32(EECD);
+		timeout--;
+	}
+
+	if (!timeout) {
+		eecd &= ~E1000_EECD_REQ;
+		ew32(EECD, eecd);
+		e_dbg("Could not acquire NVM grant\n");
+		return -E1000_ERR_NVM;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_standby_nvm - Return EEPROM to standby state
+ *  @hw: pointer to the HW structure
+ *
+ *  Return the EEPROM to a standby state.
+ **/
+static void e1000_standby_nvm(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = er32(EECD);
+
+	if (nvm->type == e1000_nvm_eeprom_spi) {
+		/* Toggle CS to flush commands */
+		eecd |= E1000_EECD_CS;
+		ew32(EECD, eecd);
+		e1e_flush();
+		udelay(nvm->delay_usec);
+		eecd &= ~E1000_EECD_CS;
+		ew32(EECD, eecd);
+		e1e_flush();
+		udelay(nvm->delay_usec);
+	}
+}
+
+/**
+ *  e1000_stop_nvm - Terminate EEPROM command
+ *  @hw: pointer to the HW structure
+ *
+ *  Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
+static void e1000_stop_nvm(struct e1000_hw *hw)
+{
+	u32 eecd;
+
+	eecd = er32(EECD);
+	if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+		/* Pull CS high */
+		eecd |= E1000_EECD_CS;
+		e1000_lower_eec_clk(hw, &eecd);
+	}
+}
+
+/**
+ *  e1000e_release_nvm - Release exclusive access to EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+void e1000e_release_nvm(struct e1000_hw *hw)
+{
+	u32 eecd;
+
+	e1000_stop_nvm(hw);
+
+	eecd = er32(EECD);
+	eecd &= ~E1000_EECD_REQ;
+	ew32(EECD, eecd);
+}
+
+/**
+ *  e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
+ *  @hw: pointer to the HW structure
+ *
+ *  Setups the EEPROM for reading and writing.
+ **/
+static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 eecd = er32(EECD);
+	u8 spi_stat_reg;
+
+	if (nvm->type == e1000_nvm_eeprom_spi) {
+		u16 timeout = NVM_MAX_RETRY_SPI;
+
+		/* Clear SK and CS */
+		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+		ew32(EECD, eecd);
+		e1e_flush();
+		udelay(1);
+
+		/* Read "Status Register" repeatedly until the LSB is cleared.
+		 * The EEPROM will signal that the command has been completed
+		 * by clearing bit 0 of the internal status register.  If it's
+		 * not cleared within 'timeout', then error out.
+		 */
+		while (timeout) {
+			e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
+						 hw->nvm.opcode_bits);
+			spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8);
+			if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+				break;
+
+			udelay(5);
+			e1000_standby_nvm(hw);
+			timeout--;
+		}
+
+		if (!timeout) {
+			e_dbg("SPI NVM Status error\n");
+			return -E1000_ERR_NVM;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_read_nvm_eerd - Reads EEPROM using EERD register
+ *  @hw: pointer to the HW structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of words to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 i, eerd = 0;
+	s32 ret_val = 0;
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * too many words for the offset, and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		e_dbg("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	for (i = 0; i < words; i++) {
+		eerd = ((offset + i) << E1000_NVM_RW_ADDR_SHIFT) +
+		    E1000_NVM_RW_REG_START;
+
+		ew32(EERD, eerd);
+		ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+		if (ret_val) {
+			e_dbg("NVM read error: %d\n", ret_val);
+			break;
+		}
+
+		data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_write_nvm_spi - Write to EEPROM using SPI
+ *  @hw: pointer to the HW structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of words to write
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  Writes data to EEPROM at offset using SPI interface.
+ *
+ *  If e1000e_update_nvm_checksum is not called after this function , the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	s32 ret_val = -E1000_ERR_NVM;
+	u16 widx = 0;
+
+	/* A check for invalid values:  offset too large, too many words,
+	 * and not enough words.
+	 */
+	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+	    (words == 0)) {
+		e_dbg("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+
+	while (widx < words) {
+		u8 write_opcode = NVM_WRITE_OPCODE_SPI;
+
+		ret_val = nvm->ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = e1000_ready_nvm_eeprom(hw);
+		if (ret_val) {
+			nvm->ops.release(hw);
+			return ret_val;
+		}
+
+		e1000_standby_nvm(hw);
+
+		/* Send the WRITE ENABLE command (8 bit opcode) */
+		e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
+					 nvm->opcode_bits);
+
+		e1000_standby_nvm(hw);
+
+		/* Some SPI eeproms use the 8th address bit embedded in the
+		 * opcode
+		 */
+		if ((nvm->address_bits == 8) && (offset >= 128))
+			write_opcode |= NVM_A8_OPCODE_SPI;
+
+		/* Send the Write command (8-bit opcode + addr) */
+		e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
+		e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
+					 nvm->address_bits);
+
+		/* Loop to allow for up to whole page write of eeprom */
+		while (widx < words) {
+			u16 word_out = data[widx];
+
+			word_out = (word_out >> 8) | (word_out << 8);
+			e1000_shift_out_eec_bits(hw, word_out, 16);
+			widx++;
+
+			if ((((offset + widx) * 2) % nvm->page_size) == 0) {
+				e1000_standby_nvm(hw);
+				break;
+			}
+		}
+		usleep_range(10000, 20000);
+		nvm->ops.release(hw);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_pba_string_generic - Read device part number
+ *  @hw: pointer to the HW structure
+ *  @pba_num: pointer to device part number
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number from the EEPROM and stores
+ *  the value in pba_num.
+ **/
+s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
+				  u32 pba_num_size)
+{
+	s32 ret_val;
+	u16 nvm_data;
+	u16 pba_ptr;
+	u16 offset;
+	u16 length;
+
+	if (pba_num == NULL) {
+		e_dbg("PBA string buffer was null\n");
+		return -E1000_ERR_INVALID_ARGUMENT;
+	}
+
+	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		return ret_val;
+	}
+
+	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		return ret_val;
+	}
+
+	/* if nvm_data is not ptr guard the PBA must be in legacy format which
+	 * means pba_ptr is actually our second data word for the PBA number
+	 * and we can decode it into an ascii string
+	 */
+	if (nvm_data != NVM_PBA_PTR_GUARD) {
+		e_dbg("NVM PBA number is not stored as string\n");
+
+		/* make sure callers buffer is big enough to store the PBA */
+		if (pba_num_size < E1000_PBANUM_LENGTH) {
+			e_dbg("PBA string buffer too small\n");
+			return E1000_ERR_NO_SPACE;
+		}
+
+		/* extract hex string from data and pba_ptr */
+		pba_num[0] = (nvm_data >> 12) & 0xF;
+		pba_num[1] = (nvm_data >> 8) & 0xF;
+		pba_num[2] = (nvm_data >> 4) & 0xF;
+		pba_num[3] = nvm_data & 0xF;
+		pba_num[4] = (pba_ptr >> 12) & 0xF;
+		pba_num[5] = (pba_ptr >> 8) & 0xF;
+		pba_num[6] = '-';
+		pba_num[7] = 0;
+		pba_num[8] = (pba_ptr >> 4) & 0xF;
+		pba_num[9] = pba_ptr & 0xF;
+
+		/* put a null character on the end of our string */
+		pba_num[10] = '\0';
+
+		/* switch all the data but the '-' to hex char */
+		for (offset = 0; offset < 10; offset++) {
+			if (pba_num[offset] < 0xA)
+				pba_num[offset] += '0';
+			else if (pba_num[offset] < 0x10)
+				pba_num[offset] += 'A' - 0xA;
+		}
+
+		return 0;
+	}
+
+	ret_val = e1000_read_nvm(hw, pba_ptr, 1, &length);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		e_dbg("NVM PBA number section invalid length\n");
+		return -E1000_ERR_NVM_PBA_SECTION;
+	}
+	/* check if pba_num buffer is big enough */
+	if (pba_num_size < (((u32)length * 2) - 1)) {
+		e_dbg("PBA string buffer too small\n");
+		return -E1000_ERR_NO_SPACE;
+	}
+
+	/* trim pba length from start of string */
+	pba_ptr++;
+	length--;
+
+	for (offset = 0; offset < length; offset++) {
+		ret_val = e1000_read_nvm(hw, pba_ptr + offset, 1, &nvm_data);
+		if (ret_val) {
+			e_dbg("NVM Read Error\n");
+			return ret_val;
+		}
+		pba_num[offset * 2] = (u8)(nvm_data >> 8);
+		pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+	}
+	pba_num[offset * 2] = '\0';
+
+	return 0;
+}
+
+/**
+ *  e1000_read_mac_addr_generic - Read device MAC address
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the device MAC address from the EEPROM and stores the value.
+ *  Since devices with two ports use the same EEPROM, we increment the
+ *  last bit in the MAC address for the second port.
+ **/
+s32 e1000_read_mac_addr_generic(struct e1000_hw *hw)
+{
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
+
+	rar_high = er32(RAH(0));
+	rar_low = er32(RAL(0));
+
+	for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i] = (u8)(rar_low >> (i * 8));
+
+	for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i + 4] = (u8)(rar_high >> (i * 8));
+
+	for (i = 0; i < ETH_ALEN; i++)
+		hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+	return 0;
+}
+
+/**
+ *  e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+		ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			e_dbg("NVM Read Error\n");
+			return ret_val;
+		}
+		checksum += nvm_data;
+	}
+
+	if (checksum != (u16)NVM_SUM) {
+		e_dbg("NVM Checksum Invalid\n");
+		return -E1000_ERR_NVM;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_update_nvm_checksum_generic - Update EEPROM checksum
+ *  @hw: pointer to the HW structure
+ *
+ *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ *  up to the checksum.  Then calculates the EEPROM checksum and writes the
+ *  value to the EEPROM.
+ **/
+s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 checksum = 0;
+	u16 i, nvm_data;
+
+	for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+		ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
+		if (ret_val) {
+			e_dbg("NVM Read Error while updating checksum.\n");
+			return ret_val;
+		}
+		checksum += nvm_data;
+	}
+	checksum = (u16)NVM_SUM - checksum;
+	ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
+	if (ret_val)
+		e_dbg("NVM Write Error while updating checksum.\n");
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_reload_nvm_generic - Reloads EEPROM
+ *  @hw: pointer to the HW structure
+ *
+ *  Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
+ *  extended control register.
+ **/
+void e1000e_reload_nvm_generic(struct e1000_hw *hw)
+{
+	u32 ctrl_ext;
+
+	usleep_range(10, 20);
+	ctrl_ext = er32(CTRL_EXT);
+	ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+	ew32(CTRL_EXT, ctrl_ext);
+	e1e_flush();
+}
diff --git a/drivers/net/ethernet/intel/e1000e/nvm.h b/drivers/net/ethernet/intel/e1000e/nvm.h
new file mode 100644
index 000000000..342bf69ef
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/nvm.h
@@ -0,0 +1,40 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000E_NVM_H_
+#define _E1000E_NVM_H_
+
+s32 e1000e_acquire_nvm(struct e1000_hw *hw);
+
+s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
+s32 e1000_read_mac_addr_generic(struct e1000_hw *hw);
+s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
+				  u32 pba_num_size);
+s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data);
+s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
+s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
+void e1000e_release_nvm(struct e1000_hw *hw);
+
+#define E1000_STM_OPCODE	0xDB00
+
+#endif
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
new file mode 100644
index 000000000..aa1923f7e
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -0,0 +1,533 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include <linux/netdevice.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "e1000.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+#define E1000_MAX_NIC 32
+
+#define OPTION_UNSET   -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED  1
+
+#define COPYBREAK_DEFAULT 256
+unsigned int copybreak = COPYBREAK_DEFAULT;
+module_param(copybreak, uint, 0644);
+MODULE_PARM_DESC(copybreak,
+		 "Maximum size of packet that is copied to a new buffer on receive");
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+#define E1000_PARAM(X, desc)					\
+	static int X[E1000_MAX_NIC+1] = E1000_PARAM_INIT;	\
+	static unsigned int num_##X;				\
+	module_param_array_named(X, X, int, &num_##X, 0);	\
+	MODULE_PARM_DESC(X, desc);
+
+/* Transmit Interrupt Delay in units of 1.024 microseconds
+ * Tx interrupt delay needs to typically be set to something non-zero
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+#define DEFAULT_TIDV 8
+#define MAX_TXDELAY 0xFFFF
+#define MIN_TXDELAY 0
+
+/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
+#define DEFAULT_TADV 32
+#define MAX_TXABSDELAY 0xFFFF
+#define MIN_TXABSDELAY 0
+
+/* Receive Interrupt Delay in units of 1.024 microseconds
+ * hardware will likely hang if you set this to anything but zero.
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define MAX_RXDELAY 0xFFFF
+#define MIN_RXDELAY 0
+
+/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define MAX_RXABSDELAY 0xFFFF
+#define MIN_RXABSDELAY 0
+
+/* Interrupt Throttle Rate (interrupts/sec)
+ *
+ * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative
+ */
+E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+#define DEFAULT_ITR 3
+#define MAX_ITR 100000
+#define MIN_ITR 100
+
+/* IntMode (Interrupt Mode)
+ *
+ * Valid Range: varies depending on kernel configuration & hardware support
+ *
+ * legacy=0, MSI=1, MSI-X=2
+ *
+ * When MSI/MSI-X support is enabled in kernel-
+ *   Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise
+ * When MSI/MSI-X support is not enabled in kernel-
+ *   Default Value: 0 (legacy)
+ *
+ * When a mode is specified that is not allowed/supported, it will be
+ * demoted to the most advanced interrupt mode available.
+ */
+E1000_PARAM(IntMode, "Interrupt Mode");
+#define MAX_INTMODE	2
+#define MIN_INTMODE	0
+
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
+/* Write Protect NVM
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(WriteProtectNVM,
+	    "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+
+/* Enable CRC Stripping
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(CrcStripping,
+	    "Enable CRC Stripping, disable if your BMC needs the CRC");
+
+struct e1000_option {
+	enum { enable_option, range_option, list_option } type;
+	const char *name;
+	const char *err;
+	int def;
+	union {
+		/* range_option info */
+		struct {
+			int min;
+			int max;
+		} r;
+		/* list_option info */
+		struct {
+			int nr;
+			struct e1000_opt_list {
+				int i;
+				char *str;
+			} *p;
+		} l;
+	} arg;
+};
+
+static int e1000_validate_option(unsigned int *value,
+				 const struct e1000_option *opt,
+				 struct e1000_adapter *adapter)
+{
+	if (*value == OPTION_UNSET) {
+		*value = opt->def;
+		return 0;
+	}
+
+	switch (opt->type) {
+	case enable_option:
+		switch (*value) {
+		case OPTION_ENABLED:
+			dev_info(&adapter->pdev->dev, "%s Enabled\n",
+				 opt->name);
+			return 0;
+		case OPTION_DISABLED:
+			dev_info(&adapter->pdev->dev, "%s Disabled\n",
+				 opt->name);
+			return 0;
+		}
+		break;
+	case range_option:
+		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+			dev_info(&adapter->pdev->dev, "%s set to %i\n",
+				 opt->name, *value);
+			return 0;
+		}
+		break;
+	case list_option: {
+		int i;
+		struct e1000_opt_list *ent;
+
+		for (i = 0; i < opt->arg.l.nr; i++) {
+			ent = &opt->arg.l.p[i];
+			if (*value == ent->i) {
+				if (ent->str[0] != '\0')
+					dev_info(&adapter->pdev->dev, "%s\n",
+						 ent->str);
+				return 0;
+			}
+		}
+	}
+		break;
+	default:
+		BUG();
+	}
+
+	dev_info(&adapter->pdev->dev, "Invalid %s value specified (%i) %s\n",
+		 opt->name, *value, opt->err);
+	*value = opt->def;
+	return -1;
+}
+
+/**
+ * e1000e_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input.  If an invalid value is given, or if no user specified
+ * value exists, a default value is used.  The final value is stored
+ * in a variable in the adapter structure.
+ **/
+void e1000e_check_options(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	int bd = adapter->bd_number;
+
+	if (bd >= E1000_MAX_NIC) {
+		dev_notice(&adapter->pdev->dev,
+			   "Warning: no configuration for board #%i\n", bd);
+		dev_notice(&adapter->pdev->dev,
+			   "Using defaults for all values\n");
+	}
+
+	/* Transmit Interrupt Delay */
+	{
+		static const struct e1000_option opt = {
+			.type = range_option,
+			.name = "Transmit Interrupt Delay",
+			.err  = "using default of "
+				__MODULE_STRING(DEFAULT_TIDV),
+			.def  = DEFAULT_TIDV,
+			.arg  = { .r = { .min = MIN_TXDELAY,
+					 .max = MAX_TXDELAY } }
+		};
+
+		if (num_TxIntDelay > bd) {
+			adapter->tx_int_delay = TxIntDelay[bd];
+			e1000_validate_option(&adapter->tx_int_delay, &opt,
+					      adapter);
+		} else {
+			adapter->tx_int_delay = opt.def;
+		}
+	}
+	/* Transmit Absolute Interrupt Delay */
+	{
+		static const struct e1000_option opt = {
+			.type = range_option,
+			.name = "Transmit Absolute Interrupt Delay",
+			.err  = "using default of "
+				__MODULE_STRING(DEFAULT_TADV),
+			.def  = DEFAULT_TADV,
+			.arg  = { .r = { .min = MIN_TXABSDELAY,
+					 .max = MAX_TXABSDELAY } }
+		};
+
+		if (num_TxAbsIntDelay > bd) {
+			adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+			e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+					      adapter);
+		} else {
+			adapter->tx_abs_int_delay = opt.def;
+		}
+	}
+	/* Receive Interrupt Delay */
+	{
+		static struct e1000_option opt = {
+			.type = range_option,
+			.name = "Receive Interrupt Delay",
+			.err  = "using default of "
+				__MODULE_STRING(DEFAULT_RDTR),
+			.def  = DEFAULT_RDTR,
+			.arg  = { .r = { .min = MIN_RXDELAY,
+					 .max = MAX_RXDELAY } }
+		};
+
+		if (num_RxIntDelay > bd) {
+			adapter->rx_int_delay = RxIntDelay[bd];
+			e1000_validate_option(&adapter->rx_int_delay, &opt,
+					      adapter);
+		} else {
+			adapter->rx_int_delay = opt.def;
+		}
+	}
+	/* Receive Absolute Interrupt Delay */
+	{
+		static const struct e1000_option opt = {
+			.type = range_option,
+			.name = "Receive Absolute Interrupt Delay",
+			.err  = "using default of "
+				__MODULE_STRING(DEFAULT_RADV),
+			.def  = DEFAULT_RADV,
+			.arg  = { .r = { .min = MIN_RXABSDELAY,
+					 .max = MAX_RXABSDELAY } }
+		};
+
+		if (num_RxAbsIntDelay > bd) {
+			adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+			e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+					      adapter);
+		} else {
+			adapter->rx_abs_int_delay = opt.def;
+		}
+	}
+	/* Interrupt Throttling Rate */
+	{
+		static const struct e1000_option opt = {
+			.type = range_option,
+			.name = "Interrupt Throttling Rate (ints/sec)",
+			.err  = "using default of "
+				__MODULE_STRING(DEFAULT_ITR),
+			.def  = DEFAULT_ITR,
+			.arg  = { .r = { .min = MIN_ITR,
+					 .max = MAX_ITR } }
+		};
+
+		if (num_InterruptThrottleRate > bd) {
+			adapter->itr = InterruptThrottleRate[bd];
+
+			/* Make sure a message is printed for non-special
+			 * values. And in case of an invalid option, display
+			 * warning, use default and go through itr/itr_setting
+			 * adjustment logic below
+			 */
+			if ((adapter->itr > 4) &&
+			    e1000_validate_option(&adapter->itr, &opt, adapter))
+				adapter->itr = opt.def;
+		} else {
+			/* If no option specified, use default value and go
+			 * through the logic below to adjust itr/itr_setting
+			 */
+			adapter->itr = opt.def;
+
+			/* Make sure a message is printed for non-special
+			 * default values
+			 */
+			if (adapter->itr > 4)
+				dev_info(&adapter->pdev->dev,
+					 "%s set to default %d\n", opt.name,
+					 adapter->itr);
+		}
+
+		adapter->itr_setting = adapter->itr;
+		switch (adapter->itr) {
+		case 0:
+			dev_info(&adapter->pdev->dev, "%s turned off\n",
+				 opt.name);
+			break;
+		case 1:
+			dev_info(&adapter->pdev->dev,
+				 "%s set to dynamic mode\n", opt.name);
+			adapter->itr = 20000;
+			break;
+		case 2:
+			dev_info(&adapter->pdev->dev,
+				 "%s Invalid mode - setting default\n",
+				 opt.name);
+			adapter->itr_setting = opt.def;
+			/* fall-through */
+		case 3:
+			dev_info(&adapter->pdev->dev,
+				 "%s set to dynamic conservative mode\n",
+				 opt.name);
+			adapter->itr = 20000;
+			break;
+		case 4:
+			dev_info(&adapter->pdev->dev,
+				 "%s set to simplified (2000-8000 ints) mode\n",
+				 opt.name);
+			break;
+		default:
+			/* Save the setting, because the dynamic bits
+			 * change itr.
+			 *
+			 * Clear the lower two bits because
+			 * they are used as control.
+			 */
+			adapter->itr_setting &= ~3;
+			break;
+		}
+	}
+	/* Interrupt Mode */
+	{
+		static struct e1000_option opt = {
+			.type = range_option,
+			.name = "Interrupt Mode",
+#ifndef CONFIG_PCI_MSI
+			.err  = "defaulting to 0 (legacy)",
+			.def  = E1000E_INT_MODE_LEGACY,
+			.arg  = { .r = { .min = 0,
+					 .max = 0 } }
+#endif
+		};
+
+#ifdef CONFIG_PCI_MSI
+		if (adapter->flags & FLAG_HAS_MSIX) {
+			opt.err = kstrdup("defaulting to 2 (MSI-X)",
+					  GFP_KERNEL);
+			opt.def = E1000E_INT_MODE_MSIX;
+			opt.arg.r.max = E1000E_INT_MODE_MSIX;
+		} else {
+			opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL);
+			opt.def = E1000E_INT_MODE_MSI;
+			opt.arg.r.max = E1000E_INT_MODE_MSI;
+		}
+
+		if (!opt.err) {
+			dev_err(&adapter->pdev->dev,
+				"Failed to allocate memory\n");
+			return;
+		}
+#endif
+
+		if (num_IntMode > bd) {
+			unsigned int int_mode = IntMode[bd];
+
+			e1000_validate_option(&int_mode, &opt, adapter);
+			adapter->int_mode = int_mode;
+		} else {
+			adapter->int_mode = opt.def;
+		}
+
+#ifdef CONFIG_PCI_MSI
+		kfree(opt.err);
+#endif
+	}
+	/* Smart Power Down */
+	{
+		static const struct e1000_option opt = {
+			.type = enable_option,
+			.name = "PHY Smart Power Down",
+			.err  = "defaulting to Disabled",
+			.def  = OPTION_DISABLED
+		};
+
+		if (num_SmartPowerDownEnable > bd) {
+			unsigned int spd = SmartPowerDownEnable[bd];
+
+			e1000_validate_option(&spd, &opt, adapter);
+			if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && spd)
+				adapter->flags |= FLAG_SMART_POWER_DOWN;
+		}
+	}
+	/* CRC Stripping */
+	{
+		static const struct e1000_option opt = {
+			.type = enable_option,
+			.name = "CRC Stripping",
+			.err  = "defaulting to Enabled",
+			.def  = OPTION_ENABLED
+		};
+
+		if (num_CrcStripping > bd) {
+			unsigned int crc_stripping = CrcStripping[bd];
+
+			e1000_validate_option(&crc_stripping, &opt, adapter);
+			if (crc_stripping == OPTION_ENABLED) {
+				adapter->flags2 |= FLAG2_CRC_STRIPPING;
+				adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
+			}
+		} else {
+			adapter->flags2 |= FLAG2_CRC_STRIPPING;
+			adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
+		}
+	}
+	/* Kumeran Lock Loss Workaround */
+	{
+		static const struct e1000_option opt = {
+			.type = enable_option,
+			.name = "Kumeran Lock Loss Workaround",
+			.err  = "defaulting to Enabled",
+			.def  = OPTION_ENABLED
+		};
+		bool enabled = opt.def;
+
+		if (num_KumeranLockLoss > bd) {
+			unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
+
+			e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+			enabled = kmrn_lock_loss;
+		}
+
+		if (hw->mac.type == e1000_ich8lan)
+			e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
+								     enabled);
+	}
+	/* Write-protect NVM */
+	{
+		static const struct e1000_option opt = {
+			.type = enable_option,
+			.name = "Write-protect NVM",
+			.err  = "defaulting to Enabled",
+			.def  = OPTION_ENABLED
+		};
+
+		if (adapter->flags & FLAG_IS_ICH) {
+			if (num_WriteProtectNVM > bd) {
+				unsigned int write_protect_nvm =
+				    WriteProtectNVM[bd];
+				e1000_validate_option(&write_protect_nvm, &opt,
+						      adapter);
+				if (write_protect_nvm)
+					adapter->flags |= FLAG_READ_ONLY_NVM;
+			} else {
+				if (opt.def)
+					adapter->flags |= FLAG_READ_ONLY_NVM;
+			}
+		}
+	}
+}
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
new file mode 100644
index 000000000..b2005e13f
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -0,0 +1,3237 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include "e1000.h"
+
+static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
+					  u16 *data, bool read, bool page_set);
+static u32 e1000_get_phy_addr_for_hv_page(u32 page);
+static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
+					  u16 *data, bool read);
+
+/* Cable length tables */
+static const u16 e1000_m88_cable_length_table[] = {
+	0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED
+};
+
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+		ARRAY_SIZE(e1000_m88_cable_length_table)
+
+static const u16 e1000_igp_2_cable_length_table[] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
+	6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
+	26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
+	44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
+	66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
+	87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
+	100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
+	124
+};
+
+#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
+		ARRAY_SIZE(e1000_igp_2_cable_length_table)
+
+/**
+ *  e1000e_check_reset_block_generic - Check if PHY reset is blocked
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the PHY management control register and check whether a PHY reset
+ *  is blocked.  If a reset is not blocked return 0, otherwise
+ *  return E1000_BLK_PHY_RESET (12).
+ **/
+s32 e1000e_check_reset_block_generic(struct e1000_hw *hw)
+{
+	u32 manc;
+
+	manc = er32(MANC);
+
+	return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? E1000_BLK_PHY_RESET : 0;
+}
+
+/**
+ *  e1000e_get_phy_id - Retrieve the PHY ID and revision
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the PHY registers and stores the PHY ID and possibly the PHY
+ *  revision in the hardware structure.
+ **/
+s32 e1000e_get_phy_id(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
+	u16 phy_id;
+	u16 retry_count = 0;
+
+	if (!phy->ops.read_reg)
+		return 0;
+
+	while (retry_count < 2) {
+		ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id);
+		if (ret_val)
+			return ret_val;
+
+		phy->id = (u32)(phy_id << 16);
+		usleep_range(20, 40);
+		ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id);
+		if (ret_val)
+			return ret_val;
+
+		phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
+		phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+
+		if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
+			return 0;
+
+		retry_count++;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_phy_reset_dsp - Reset PHY DSP
+ *  @hw: pointer to the HW structure
+ *
+ *  Reset the digital signal processor.
+ **/
+s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	ret_val = e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
+	if (ret_val)
+		return ret_val;
+
+	return e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0);
+}
+
+/**
+ *  e1000e_read_phy_reg_mdic - Read MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the MDI control register in the PHY at offset and stores the
+ *  information read to data.
+ **/
+s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, mdic = 0;
+
+	if (offset > MAX_PHY_REG_ADDRESS) {
+		e_dbg("PHY Address %d is out of range\n", offset);
+		return -E1000_ERR_PARAM;
+	}
+
+	/* Set up Op-code, Phy Address, and register offset in the MDI
+	 * Control register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+		(phy->addr << E1000_MDIC_PHY_SHIFT) |
+		(E1000_MDIC_OP_READ));
+
+	ew32(MDIC, mdic);
+
+	/* Poll the ready bit to see if the MDI read completed
+	 * Increasing the time out as testing showed failures with
+	 * the lower time out
+	 */
+	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+		udelay(50);
+		mdic = er32(MDIC);
+		if (mdic & E1000_MDIC_READY)
+			break;
+	}
+	if (!(mdic & E1000_MDIC_READY)) {
+		e_dbg("MDI Read did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (mdic & E1000_MDIC_ERROR) {
+		e_dbg("MDI Error\n");
+		return -E1000_ERR_PHY;
+	}
+	if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
+		e_dbg("MDI Read offset error - requested %d, returned %d\n",
+		      offset,
+		      (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
+		return -E1000_ERR_PHY;
+	}
+	*data = (u16)mdic;
+
+	/* Allow some time after each MDIC transaction to avoid
+	 * reading duplicate data in the next MDIC transaction.
+	 */
+	if (hw->mac.type == e1000_pch2lan)
+		udelay(100);
+
+	return 0;
+}
+
+/**
+ *  e1000e_write_phy_reg_mdic - Write MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write to register at offset
+ *
+ *  Writes data to MDI control register in the PHY at offset.
+ **/
+s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, mdic = 0;
+
+	if (offset > MAX_PHY_REG_ADDRESS) {
+		e_dbg("PHY Address %d is out of range\n", offset);
+		return -E1000_ERR_PARAM;
+	}
+
+	/* Set up Op-code, Phy Address, and register offset in the MDI
+	 * Control register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	mdic = (((u32)data) |
+		(offset << E1000_MDIC_REG_SHIFT) |
+		(phy->addr << E1000_MDIC_PHY_SHIFT) |
+		(E1000_MDIC_OP_WRITE));
+
+	ew32(MDIC, mdic);
+
+	/* Poll the ready bit to see if the MDI read completed
+	 * Increasing the time out as testing showed failures with
+	 * the lower time out
+	 */
+	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+		udelay(50);
+		mdic = er32(MDIC);
+		if (mdic & E1000_MDIC_READY)
+			break;
+	}
+	if (!(mdic & E1000_MDIC_READY)) {
+		e_dbg("MDI Write did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (mdic & E1000_MDIC_ERROR) {
+		e_dbg("MDI Error\n");
+		return -E1000_ERR_PHY;
+	}
+	if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
+		e_dbg("MDI Write offset error - requested %d, returned %d\n",
+		      offset,
+		      (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
+		return -E1000_ERR_PHY;
+	}
+
+	/* Allow some time after each MDIC transaction to avoid
+	 * reading duplicate data in the next MDIC transaction.
+	 */
+	if (hw->mac.type == e1000_pch2lan)
+		udelay(100);
+
+	return 0;
+}
+
+/**
+ *  e1000e_read_phy_reg_m88 - Read m88 PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					   data);
+
+	hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_write_phy_reg_m88 - Write m88 PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					    data);
+
+	hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_set_page_igp - Set page as on IGP-like PHY(s)
+ *  @hw: pointer to the HW structure
+ *  @page: page to set (shifted left when necessary)
+ *
+ *  Sets PHY page required for PHY register access.  Assumes semaphore is
+ *  already acquired.  Note, this function sets phy.addr to 1 so the caller
+ *  must set it appropriately (if necessary) after this function returns.
+ **/
+s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page)
+{
+	e_dbg("Setting page 0x%x\n", page);
+
+	hw->phy.addr = 1;
+
+	return e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page);
+}
+
+/**
+ *  __e1000e_read_phy_reg_igp - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and stores the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
+				     bool locked)
+{
+	s32 ret_val = 0;
+
+	if (!locked) {
+		if (!hw->phy.ops.acquire)
+			return 0;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG)
+		ret_val = e1000e_write_phy_reg_mdic(hw,
+						    IGP01E1000_PHY_PAGE_SELECT,
+						    (u16)offset);
+	if (!ret_val)
+		ret_val = e1000e_read_phy_reg_mdic(hw,
+						   MAX_PHY_REG_ADDRESS & offset,
+						   data);
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_read_phy_reg_igp - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore then reads the PHY register at offset and stores the
+ *  retrieved information in data.
+ *  Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000e_read_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ *  e1000e_read_phy_reg_igp_locked - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset and stores the retrieved information
+ *  in data.  Assumes semaphore already acquired.
+ **/
+s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000e_read_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ *  e1000e_write_phy_reg_igp - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
+				      bool locked)
+{
+	s32 ret_val = 0;
+
+	if (!locked) {
+		if (!hw->phy.ops.acquire)
+			return 0;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG)
+		ret_val = e1000e_write_phy_reg_mdic(hw,
+						    IGP01E1000_PHY_PAGE_SELECT,
+						    (u16)offset);
+	if (!ret_val)
+		ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS &
+						    offset, data);
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_write_phy_reg_igp - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000e_write_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ *  e1000e_write_phy_reg_igp_locked - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset.
+ *  Assumes semaphore already acquired.
+ **/
+s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000e_write_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ *  __e1000_read_kmrn_reg - Read kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary.  Then reads the PHY register at offset
+ *  using the kumeran interface.  The information retrieved is stored in data.
+ *  Release any acquired semaphores before exiting.
+ **/
+static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
+				 bool locked)
+{
+	u32 kmrnctrlsta;
+
+	if (!locked) {
+		s32 ret_val = 0;
+
+		if (!hw->phy.ops.acquire)
+			return 0;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+		       E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+	ew32(KMRNCTRLSTA, kmrnctrlsta);
+	e1e_flush();
+
+	udelay(2);
+
+	kmrnctrlsta = er32(KMRNCTRLSTA);
+	*data = (u16)kmrnctrlsta;
+
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return 0;
+}
+
+/**
+ *  e1000e_read_kmrn_reg -  Read kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore then reads the PHY register at offset using the
+ *  kumeran interface.  The information retrieved is stored in data.
+ *  Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000_read_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ *  e1000e_read_kmrn_reg_locked -  Read kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset using the kumeran interface.  The
+ *  information retrieved is stored in data.
+ *  Assumes semaphore already acquired.
+ **/
+s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000_read_kmrn_reg(hw, offset, data, true);
+}
+
+/**
+ *  __e1000_write_kmrn_reg - Write kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary.  Then write the data to PHY register
+ *  at the offset using the kumeran interface.  Release any acquired semaphores
+ *  before exiting.
+ **/
+static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
+				  bool locked)
+{
+	u32 kmrnctrlsta;
+
+	if (!locked) {
+		s32 ret_val = 0;
+
+		if (!hw->phy.ops.acquire)
+			return 0;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+		       E1000_KMRNCTRLSTA_OFFSET) | data;
+	ew32(KMRNCTRLSTA, kmrnctrlsta);
+	e1e_flush();
+
+	udelay(2);
+
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return 0;
+}
+
+/**
+ *  e1000e_write_kmrn_reg -  Write kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore then writes the data to the PHY register at the offset
+ *  using the kumeran interface.  Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000_write_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ *  e1000e_write_kmrn_reg_locked -  Write kumeran register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Write the data to PHY register at the offset using the kumeran interface.
+ *  Assumes semaphore already acquired.
+ **/
+s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000_write_kmrn_reg(hw, offset, data, true);
+}
+
+/**
+ *  e1000_set_master_slave_mode - Setup PHY for Master/slave mode
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up Master/slave mode
+ **/
+static s32 e1000_set_master_slave_mode(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_data;
+
+	/* Resolve Master/Slave mode */
+	ret_val = e1e_rphy(hw, MII_CTRL1000, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* load defaults for future use */
+	hw->phy.original_ms_type = (phy_data & CTL1000_ENABLE_MASTER) ?
+	    ((phy_data & CTL1000_AS_MASTER) ?
+	     e1000_ms_force_master : e1000_ms_force_slave) : e1000_ms_auto;
+
+	switch (hw->phy.ms_type) {
+	case e1000_ms_force_master:
+		phy_data |= (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
+		break;
+	case e1000_ms_force_slave:
+		phy_data |= CTL1000_ENABLE_MASTER;
+		phy_data &= ~(CTL1000_AS_MASTER);
+		break;
+	case e1000_ms_auto:
+		phy_data &= ~CTL1000_ENABLE_MASTER;
+		/* fall-through */
+	default:
+		break;
+	}
+
+	return e1e_wphy(hw, MII_CTRL1000, phy_data);
+}
+
+/**
+ *  e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up Carrier-sense on Transmit and downshift values.
+ **/
+s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_data;
+
+	/* Enable CRS on Tx. This must be set for half-duplex operation. */
+	ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
+
+	/* Enable downshift */
+	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
+
+	ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Set MDI/MDIX mode */
+	ret_val = e1e_rphy(hw, I82577_PHY_CTRL_2, &phy_data);
+	if (ret_val)
+		return ret_val;
+	phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK;
+	/* Options:
+	 *   0 - Auto (default)
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 */
+	switch (hw->phy.mdix) {
+	case 1:
+		break;
+	case 2:
+		phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX;
+		break;
+	case 0:
+	default:
+		phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX;
+		break;
+	}
+	ret_val = e1e_wphy(hw, I82577_PHY_CTRL_2, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	return e1000_set_master_slave_mode(hw);
+}
+
+/**
+ *  e1000e_copper_link_setup_m88 - Setup m88 PHY's for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up MDI/MDI-X and polarity for m88 PHY's.  If necessary, transmit clock
+ *  and downshift values are set also.
+ **/
+s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+
+	/* Enable CRS on Tx. This must be set for half-duplex operation. */
+	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* For BM PHY this bit is downshift enable */
+	if (phy->type != e1000_phy_bm)
+		phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+	/* Options:
+	 *   MDI/MDI-X = 0 (default)
+	 *   0 - Auto for all speeds
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+	 */
+	phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+	switch (phy->mdix) {
+	case 1:
+		phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+		break;
+	case 2:
+		phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+		break;
+	case 3:
+		phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+		break;
+	case 0:
+	default:
+		phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+		break;
+	}
+
+	/* Options:
+	 *   disable_polarity_correction = 0 (default)
+	 *       Automatic Correction for Reversed Cable Polarity
+	 *   0 - Disabled
+	 *   1 - Enabled
+	 */
+	phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+	if (phy->disable_polarity_correction)
+		phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+	/* Enable downshift on BM (disabled by default) */
+	if (phy->type == e1000_phy_bm) {
+		/* For 82574/82583, first disable then enable downshift */
+		if (phy->id == BME1000_E_PHY_ID_R2) {
+			phy_data &= ~BME1000_PSCR_ENABLE_DOWNSHIFT;
+			ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL,
+					   phy_data);
+			if (ret_val)
+				return ret_val;
+			/* Commit the changes. */
+			ret_val = phy->ops.commit(hw);
+			if (ret_val) {
+				e_dbg("Error committing the PHY changes\n");
+				return ret_val;
+			}
+		}
+
+		phy_data |= BME1000_PSCR_ENABLE_DOWNSHIFT;
+	}
+
+	ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	if ((phy->type == e1000_phy_m88) &&
+	    (phy->revision < E1000_REVISION_4) &&
+	    (phy->id != BME1000_E_PHY_ID_R2)) {
+		/* Force TX_CLK in the Extended PHY Specific Control Register
+		 * to 25MHz clock.
+		 */
+		ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+		if ((phy->revision == 2) && (phy->id == M88E1111_I_PHY_ID)) {
+			/* 82573L PHY - set the downshift counter to 5x. */
+			phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
+			phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+		} else {
+			/* Configure Master and Slave downshift values */
+			phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+				      M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+			phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+				     M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+		}
+		ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if ((phy->type == e1000_phy_bm) && (phy->id == BME1000_E_PHY_ID_R2)) {
+		/* Set PHY page 0, register 29 to 0x0003 */
+		ret_val = e1e_wphy(hw, 29, 0x0003);
+		if (ret_val)
+			return ret_val;
+
+		/* Set PHY page 0, register 30 to 0x0000 */
+		ret_val = e1e_wphy(hw, 30, 0x0000);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Commit the changes. */
+	if (phy->ops.commit) {
+		ret_val = phy->ops.commit(hw);
+		if (ret_val) {
+			e_dbg("Error committing the PHY changes\n");
+			return ret_val;
+		}
+	}
+
+	if (phy->type == e1000_phy_82578) {
+		ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* 82578 PHY - set the downshift count to 1x. */
+		phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
+		phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
+		ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_copper_link_setup_igp - Setup igp PHY's for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
+ *  igp PHY's.
+ **/
+s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	ret_val = e1000_phy_hw_reset(hw);
+	if (ret_val) {
+		e_dbg("Error resetting the PHY.\n");
+		return ret_val;
+	}
+
+	/* Wait 100ms for MAC to configure PHY from NVM settings, to avoid
+	 * timeout issues when LFS is enabled.
+	 */
+	msleep(100);
+
+	/* disable lplu d0 during driver init */
+	if (hw->phy.ops.set_d0_lplu_state) {
+		ret_val = hw->phy.ops.set_d0_lplu_state(hw, false);
+		if (ret_val) {
+			e_dbg("Error Disabling LPLU D0\n");
+			return ret_val;
+		}
+	}
+	/* Configure mdi-mdix settings */
+	ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+	switch (phy->mdix) {
+	case 1:
+		data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+		break;
+	case 2:
+		data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+		break;
+	case 0:
+	default:
+		data |= IGP01E1000_PSCR_AUTO_MDIX;
+		break;
+	}
+	ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, data);
+	if (ret_val)
+		return ret_val;
+
+	/* set auto-master slave resolution settings */
+	if (hw->mac.autoneg) {
+		/* when autonegotiation advertisement is only 1000Mbps then we
+		 * should disable SmartSpeed and enable Auto MasterSlave
+		 * resolution as hardware default.
+		 */
+		if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
+			/* Disable SmartSpeed */
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+
+			/* Set auto Master/Slave resolution process */
+			ret_val = e1e_rphy(hw, MII_CTRL1000, &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~CTL1000_ENABLE_MASTER;
+			ret_val = e1e_wphy(hw, MII_CTRL1000, data);
+			if (ret_val)
+				return ret_val;
+		}
+
+		ret_val = e1000_set_master_slave_mode(hw);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_setup_autoneg - Configure PHY for auto-negotiation
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the MII auto-neg advertisement register and/or the 1000T control
+ *  register and if the PHY is already setup for auto-negotiation, then
+ *  return successful.  Otherwise, setup advertisement and flow control to
+ *  the appropriate values for the wanted auto-negotiation.
+ **/
+static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 mii_autoneg_adv_reg;
+	u16 mii_1000t_ctrl_reg = 0;
+
+	phy->autoneg_advertised &= phy->autoneg_mask;
+
+	/* Read the MII Auto-Neg Advertisement Register (Address 4). */
+	ret_val = e1e_rphy(hw, MII_ADVERTISE, &mii_autoneg_adv_reg);
+	if (ret_val)
+		return ret_val;
+
+	if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+		/* Read the MII 1000Base-T Control Register (Address 9). */
+		ret_val = e1e_rphy(hw, MII_CTRL1000, &mii_1000t_ctrl_reg);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Need to parse both autoneg_advertised and fc and set up
+	 * the appropriate PHY registers.  First we will parse for
+	 * autoneg_advertised software override.  Since we can advertise
+	 * a plethora of combinations, we need to check each bit
+	 * individually.
+	 */
+
+	/* First we clear all the 10/100 mb speed bits in the Auto-Neg
+	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
+	 * the  1000Base-T Control Register (Address 9).
+	 */
+	mii_autoneg_adv_reg &= ~(ADVERTISE_100FULL |
+				 ADVERTISE_100HALF |
+				 ADVERTISE_10FULL | ADVERTISE_10HALF);
+	mii_1000t_ctrl_reg &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
+
+	e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
+
+	/* Do we want to advertise 10 Mb Half Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
+		e_dbg("Advertise 10mb Half duplex\n");
+		mii_autoneg_adv_reg |= ADVERTISE_10HALF;
+	}
+
+	/* Do we want to advertise 10 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
+		e_dbg("Advertise 10mb Full duplex\n");
+		mii_autoneg_adv_reg |= ADVERTISE_10FULL;
+	}
+
+	/* Do we want to advertise 100 Mb Half Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
+		e_dbg("Advertise 100mb Half duplex\n");
+		mii_autoneg_adv_reg |= ADVERTISE_100HALF;
+	}
+
+	/* Do we want to advertise 100 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
+		e_dbg("Advertise 100mb Full duplex\n");
+		mii_autoneg_adv_reg |= ADVERTISE_100FULL;
+	}
+
+	/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+	if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
+		e_dbg("Advertise 1000mb Half duplex request denied!\n");
+
+	/* Do we want to advertise 1000 Mb Full Duplex? */
+	if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
+		e_dbg("Advertise 1000mb Full duplex\n");
+		mii_1000t_ctrl_reg |= ADVERTISE_1000FULL;
+	}
+
+	/* Check for a software override of the flow control settings, and
+	 * setup the PHY advertisement registers accordingly.  If
+	 * auto-negotiation is enabled, then software will have to set the
+	 * "PAUSE" bits to the correct value in the Auto-Negotiation
+	 * Advertisement Register (MII_ADVERTISE) and re-start auto-
+	 * negotiation.
+	 *
+	 * The possible values of the "fc" parameter are:
+	 *      0:  Flow control is completely disabled
+	 *      1:  Rx flow control is enabled (we can receive pause frames
+	 *          but not send pause frames).
+	 *      2:  Tx flow control is enabled (we can send pause frames
+	 *          but we do not support receiving pause frames).
+	 *      3:  Both Rx and Tx flow control (symmetric) are enabled.
+	 *  other:  No software override.  The flow control configuration
+	 *          in the EEPROM is used.
+	 */
+	switch (hw->fc.current_mode) {
+	case e1000_fc_none:
+		/* Flow control (Rx & Tx) is completely disabled by a
+		 * software over-ride.
+		 */
+		mii_autoneg_adv_reg &=
+		    ~(ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
+		break;
+	case e1000_fc_rx_pause:
+		/* Rx Flow control is enabled, and Tx Flow control is
+		 * disabled, by a software over-ride.
+		 *
+		 * Since there really isn't a way to advertise that we are
+		 * capable of Rx Pause ONLY, we will advertise that we
+		 * support both symmetric and asymmetric Rx PAUSE.  Later
+		 * (in e1000e_config_fc_after_link_up) we will disable the
+		 * hw's ability to send PAUSE frames.
+		 */
+		mii_autoneg_adv_reg |=
+		    (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
+		break;
+	case e1000_fc_tx_pause:
+		/* Tx Flow control is enabled, and Rx Flow control is
+		 * disabled, by a software over-ride.
+		 */
+		mii_autoneg_adv_reg |= ADVERTISE_PAUSE_ASYM;
+		mii_autoneg_adv_reg &= ~ADVERTISE_PAUSE_CAP;
+		break;
+	case e1000_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by a software
+		 * over-ride.
+		 */
+		mii_autoneg_adv_reg |=
+		    (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
+		break;
+	default:
+		e_dbg("Flow control param set incorrectly\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	ret_val = e1e_wphy(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
+	if (ret_val)
+		return ret_val;
+
+	e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+	if (phy->autoneg_mask & ADVERTISE_1000_FULL)
+		ret_val = e1e_wphy(hw, MII_CTRL1000, mii_1000t_ctrl_reg);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_copper_link_autoneg - Setup/Enable autoneg for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Performs initial bounds checking on autoneg advertisement parameter, then
+ *  configure to advertise the full capability.  Setup the PHY to autoneg
+ *  and restart the negotiation process between the link partner.  If
+ *  autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
+ **/
+static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_ctrl;
+
+	/* Perform some bounds checking on the autoneg advertisement
+	 * parameter.
+	 */
+	phy->autoneg_advertised &= phy->autoneg_mask;
+
+	/* If autoneg_advertised is zero, we assume it was not defaulted
+	 * by the calling code so we set to advertise full capability.
+	 */
+	if (!phy->autoneg_advertised)
+		phy->autoneg_advertised = phy->autoneg_mask;
+
+	e_dbg("Reconfiguring auto-neg advertisement params\n");
+	ret_val = e1000_phy_setup_autoneg(hw);
+	if (ret_val) {
+		e_dbg("Error Setting up Auto-Negotiation\n");
+		return ret_val;
+	}
+	e_dbg("Restarting Auto-Neg\n");
+
+	/* Restart auto-negotiation by setting the Auto Neg Enable bit and
+	 * the Auto Neg Restart bit in the PHY control register.
+	 */
+	ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	phy_ctrl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+	ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	/* Does the user want to wait for Auto-Neg to complete here, or
+	 * check at a later time (for example, callback routine).
+	 */
+	if (phy->autoneg_wait_to_complete) {
+		ret_val = e1000_wait_autoneg(hw);
+		if (ret_val) {
+			e_dbg("Error while waiting for autoneg to complete\n");
+			return ret_val;
+		}
+	}
+
+	hw->mac.get_link_status = true;
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_setup_copper_link - Configure copper link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the appropriate function to configure the link for auto-neg or forced
+ *  speed and duplex.  Then we check for link, once link is established calls
+ *  to configure collision distance and flow control are called.  If link is
+ *  not established, we return -E1000_ERR_PHY (-2).
+ **/
+s32 e1000e_setup_copper_link(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	bool link;
+
+	if (hw->mac.autoneg) {
+		/* Setup autoneg and flow control advertisement and perform
+		 * autonegotiation.
+		 */
+		ret_val = e1000_copper_link_autoneg(hw);
+		if (ret_val)
+			return ret_val;
+	} else {
+		/* PHY will be set to 10H, 10F, 100H or 100F
+		 * depending on user settings.
+		 */
+		e_dbg("Forcing Speed and Duplex\n");
+		ret_val = hw->phy.ops.force_speed_duplex(hw);
+		if (ret_val) {
+			e_dbg("Error Forcing Speed and Duplex\n");
+			return ret_val;
+		}
+	}
+
+	/* Check link status. Wait up to 100 microseconds for link to become
+	 * valid.
+	 */
+	ret_val = e1000e_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10,
+					      &link);
+	if (ret_val)
+		return ret_val;
+
+	if (link) {
+		e_dbg("Valid link established!!!\n");
+		hw->mac.ops.config_collision_dist(hw);
+		ret_val = e1000e_config_fc_after_link_up(hw);
+	} else {
+		e_dbg("Unable to establish link!!!\n");
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Waits for link and returns
+ *  successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	ret_val = e1e_rphy(hw, MII_BMCR, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = e1e_wphy(hw, MII_BMCR, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Clear Auto-Crossover to force MDI manually.  IGP requires MDI
+	 * forced whenever speed and duplex are forced.
+	 */
+	ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+	phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+	ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	e_dbg("IGP PSCR: %X\n", phy_data);
+
+	udelay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
+
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link)
+			e_dbg("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Resets the PHY to commit the
+ *  changes.  If time expires while waiting for link up, we reset the DSP.
+ *  After reset, TX_CLK and CRS on Tx must be set.  Return successful upon
+ *  successful completion, else return corresponding error code.
+ **/
+s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	/* Clear Auto-Crossover to force MDI manually.  M88E1000 requires MDI
+	 * forced whenever speed and duplex are forced.
+	 */
+	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+	ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	e_dbg("M88E1000 PSCR: %X\n", phy_data);
+
+	ret_val = e1e_rphy(hw, MII_BMCR, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = e1e_wphy(hw, MII_BMCR, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Reset the phy to commit changes. */
+	if (hw->phy.ops.commit) {
+		ret_val = hw->phy.ops.commit(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (phy->autoneg_wait_to_complete) {
+		e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
+
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link) {
+			if (hw->phy.type != e1000_phy_m88) {
+				e_dbg("Link taking longer than expected.\n");
+			} else {
+				/* We didn't get link.
+				 * Reset the DSP and cross our fingers.
+				 */
+				ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
+						   0x001d);
+				if (ret_val)
+					return ret_val;
+				ret_val = e1000e_phy_reset_dsp(hw);
+				if (ret_val)
+					return ret_val;
+			}
+		}
+
+		/* Try once more */
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (hw->phy.type != e1000_phy_m88)
+		return 0;
+
+	ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* Resetting the phy means we need to re-force TX_CLK in the
+	 * Extended PHY Specific Control Register to 25MHz clock from
+	 * the reset value of 2.5MHz.
+	 */
+	phy_data |= M88E1000_EPSCR_TX_CLK_25;
+	ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	/* In addition, we must re-enable CRS on Tx for both half and full
+	 * duplex.
+	 */
+	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+	ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex
+ *  @hw: pointer to the HW structure
+ *
+ *  Forces the speed and duplex settings of the PHY.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1e_rphy(hw, MII_BMCR, &data);
+	if (ret_val)
+		return ret_val;
+
+	e1000e_phy_force_speed_duplex_setup(hw, &data);
+
+	ret_val = e1e_wphy(hw, MII_BMCR, data);
+	if (ret_val)
+		return ret_val;
+
+	/* Disable MDI-X support for 10/100 */
+	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data &= ~IFE_PMC_AUTO_MDIX;
+	data &= ~IFE_PMC_FORCE_MDIX;
+
+	ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
+	if (ret_val)
+		return ret_val;
+
+	e_dbg("IFE PMC: %X\n", data);
+
+	udelay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
+
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link)
+			e_dbg("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
+ *  @hw: pointer to the HW structure
+ *  @phy_ctrl: pointer to current value of MII_BMCR
+ *
+ *  Forces speed and duplex on the PHY by doing the following: disable flow
+ *  control, force speed/duplex on the MAC, disable auto speed detection,
+ *  disable auto-negotiation, configure duplex, configure speed, configure
+ *  the collision distance, write configuration to CTRL register.  The
+ *  caller must write to the MII_BMCR register for these settings to
+ *  take affect.
+ **/
+void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 ctrl;
+
+	/* Turn off flow control when forcing speed/duplex */
+	hw->fc.current_mode = e1000_fc_none;
+
+	/* Force speed/duplex on the mac */
+	ctrl = er32(CTRL);
+	ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	ctrl &= ~E1000_CTRL_SPD_SEL;
+
+	/* Disable Auto Speed Detection */
+	ctrl &= ~E1000_CTRL_ASDE;
+
+	/* Disable autoneg on the phy */
+	*phy_ctrl &= ~BMCR_ANENABLE;
+
+	/* Forcing Full or Half Duplex? */
+	if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
+		ctrl &= ~E1000_CTRL_FD;
+		*phy_ctrl &= ~BMCR_FULLDPLX;
+		e_dbg("Half Duplex\n");
+	} else {
+		ctrl |= E1000_CTRL_FD;
+		*phy_ctrl |= BMCR_FULLDPLX;
+		e_dbg("Full Duplex\n");
+	}
+
+	/* Forcing 10mb or 100mb? */
+	if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
+		ctrl |= E1000_CTRL_SPD_100;
+		*phy_ctrl |= BMCR_SPEED100;
+		*phy_ctrl &= ~BMCR_SPEED1000;
+		e_dbg("Forcing 100mb\n");
+	} else {
+		ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+		*phy_ctrl &= ~(BMCR_SPEED1000 | BMCR_SPEED100);
+		e_dbg("Forcing 10mb\n");
+	}
+
+	hw->mac.ops.config_collision_dist(hw);
+
+	ew32(CTRL, ctrl);
+}
+
+/**
+ *  e1000e_set_d3_lplu_state - Sets low power link up state for D3
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  The low power link up (lplu) state is set to the power management level D3
+ *  and SmartSpeed is disabled when active is true, else clear lplu for D3
+ *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.
+ **/
+s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+	if (ret_val)
+		return ret_val;
+
+	if (!active) {
+		data &= ~IGP02E1000_PM_D3_LPLU;
+		ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
+		if (ret_val)
+			return ret_val;
+		/* LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+
+			data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		} else if (phy->smart_speed == e1000_smart_speed_off) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		}
+	} else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+		   (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+		   (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+		data |= IGP02E1000_PM_D3_LPLU;
+		ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
+		if (ret_val)
+			return ret_val;
+
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+		if (ret_val)
+			return ret_val;
+
+		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_check_downshift - Checks whether a downshift in speed occurred
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns 1
+ *
+ *  A downshift is detected by querying the PHY link health.
+ **/
+s32 e1000e_check_downshift(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, offset, mask;
+
+	switch (phy->type) {
+	case e1000_phy_m88:
+	case e1000_phy_gg82563:
+	case e1000_phy_bm:
+	case e1000_phy_82578:
+		offset = M88E1000_PHY_SPEC_STATUS;
+		mask = M88E1000_PSSR_DOWNSHIFT;
+		break;
+	case e1000_phy_igp_2:
+	case e1000_phy_igp_3:
+		offset = IGP01E1000_PHY_LINK_HEALTH;
+		mask = IGP01E1000_PLHR_SS_DOWNGRADE;
+		break;
+	default:
+		/* speed downshift not supported */
+		phy->speed_downgraded = false;
+		return 0;
+	}
+
+	ret_val = e1e_rphy(hw, offset, &phy_data);
+
+	if (!ret_val)
+		phy->speed_downgraded = !!(phy_data & mask);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_polarity_m88 - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY specific status register.
+ **/
+s32 e1000_check_polarity_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((data & M88E1000_PSSR_REV_POLARITY)
+				       ? e1000_rev_polarity_reversed
+				       : e1000_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_polarity_igp - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY port status register, and the
+ *  current speed (since there is no polarity at 100Mbps).
+ **/
+s32 e1000_check_polarity_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data, offset, mask;
+
+	/* Polarity is determined based on the speed of
+	 * our connection.
+	 */
+	ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+	if (ret_val)
+		return ret_val;
+
+	if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+	    IGP01E1000_PSSR_SPEED_1000MBPS) {
+		offset = IGP01E1000_PHY_PCS_INIT_REG;
+		mask = IGP01E1000_PHY_POLARITY_MASK;
+	} else {
+		/* This really only applies to 10Mbps since
+		 * there is no polarity for 100Mbps (always 0).
+		 */
+		offset = IGP01E1000_PHY_PORT_STATUS;
+		mask = IGP01E1000_PSSR_POLARITY_REVERSED;
+	}
+
+	ret_val = e1e_rphy(hw, offset, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((data & mask)
+				       ? e1000_rev_polarity_reversed
+				       : e1000_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_polarity_ife - Check cable polarity for IFE PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Polarity is determined on the polarity reversal feature being enabled.
+ **/
+s32 e1000_check_polarity_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, offset, mask;
+
+	/* Polarity is determined based on the reversal feature being enabled.
+	 */
+	if (phy->polarity_correction) {
+		offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
+		mask = IFE_PESC_POLARITY_REVERSED;
+	} else {
+		offset = IFE_PHY_SPECIAL_CONTROL;
+		mask = IFE_PSC_FORCE_POLARITY;
+	}
+
+	ret_val = e1e_rphy(hw, offset, &phy_data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((phy_data & mask)
+				       ? e1000_rev_polarity_reversed
+				       : e1000_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_wait_autoneg - Wait for auto-neg completion
+ *  @hw: pointer to the HW structure
+ *
+ *  Waits for auto-negotiation to complete or for the auto-negotiation time
+ *  limit to expire, which ever happens first.
+ **/
+static s32 e1000_wait_autoneg(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 i, phy_status;
+
+	/* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
+	for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
+		ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
+		if (ret_val)
+			break;
+		ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
+		if (ret_val)
+			break;
+		if (phy_status & BMSR_ANEGCOMPLETE)
+			break;
+		msleep(100);
+	}
+
+	/* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
+	 * has completed.
+	 */
+	return ret_val;
+}
+
+/**
+ *  e1000e_phy_has_link_generic - Polls PHY for link
+ *  @hw: pointer to the HW structure
+ *  @iterations: number of times to poll for link
+ *  @usec_interval: delay between polling attempts
+ *  @success: pointer to whether polling was successful or not
+ *
+ *  Polls the PHY status register for link, 'iterations' number of times.
+ **/
+s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
+				u32 usec_interval, bool *success)
+{
+	s32 ret_val = 0;
+	u16 i, phy_status;
+
+	for (i = 0; i < iterations; i++) {
+		/* Some PHYs require the MII_BMSR register to be read
+		 * twice due to the link bit being sticky.  No harm doing
+		 * it across the board.
+		 */
+		ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
+		if (ret_val) {
+			/* If the first read fails, another entity may have
+			 * ownership of the resources, wait and try again to
+			 * see if they have relinquished the resources yet.
+			 */
+			if (usec_interval >= 1000)
+				msleep(usec_interval / 1000);
+			else
+				udelay(usec_interval);
+		}
+		ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
+		if (ret_val)
+			break;
+		if (phy_status & BMSR_LSTATUS)
+			break;
+		if (usec_interval >= 1000)
+			msleep(usec_interval / 1000);
+		else
+			udelay(usec_interval);
+	}
+
+	*success = (i < iterations);
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_get_cable_length_m88 - Determine cable length for m88 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Reads the PHY specific status register to retrieve the cable length
+ *  information.  The cable length is determined by averaging the minimum and
+ *  maximum values to get the "average" cable length.  The m88 PHY has four
+ *  possible cable length values, which are:
+ *	Register Value		Cable Length
+ *	0			< 50 meters
+ *	1			50 - 80 meters
+ *	2			80 - 110 meters
+ *	3			110 - 140 meters
+ *	4			> 140 meters
+ **/
+s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, index;
+
+	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+		 M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+
+	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1)
+		return -E1000_ERR_PHY;
+
+	phy->min_cable_length = e1000_m88_cable_length_table[index];
+	phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+	return 0;
+}
+
+/**
+ *  e1000e_get_cable_length_igp_2 - Determine cable length for igp2 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  The automatic gain control (agc) normalizes the amplitude of the
+ *  received signal, adjusting for the attenuation produced by the
+ *  cable.  By reading the AGC registers, which represent the
+ *  combination of coarse and fine gain value, the value can be put
+ *  into a lookup table to obtain the approximate cable length
+ *  for each channel.
+ **/
+s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, i, agc_value = 0;
+	u16 cur_agc_index, max_agc_index = 0;
+	u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
+	static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
+		IGP02E1000_PHY_AGC_A,
+		IGP02E1000_PHY_AGC_B,
+		IGP02E1000_PHY_AGC_C,
+		IGP02E1000_PHY_AGC_D
+	};
+
+	/* Read the AGC registers for all channels */
+	for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
+		ret_val = e1e_rphy(hw, agc_reg_array[i], &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* Getting bits 15:9, which represent the combination of
+		 * coarse and fine gain values.  The result is a number
+		 * that can be put into the lookup table to obtain the
+		 * approximate cable length.
+		 */
+		cur_agc_index = ((phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+				 IGP02E1000_AGC_LENGTH_MASK);
+
+		/* Array index bound check. */
+		if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
+		    (cur_agc_index == 0))
+			return -E1000_ERR_PHY;
+
+		/* Remove min & max AGC values from calculation. */
+		if (e1000_igp_2_cable_length_table[min_agc_index] >
+		    e1000_igp_2_cable_length_table[cur_agc_index])
+			min_agc_index = cur_agc_index;
+		if (e1000_igp_2_cable_length_table[max_agc_index] <
+		    e1000_igp_2_cable_length_table[cur_agc_index])
+			max_agc_index = cur_agc_index;
+
+		agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
+	}
+
+	agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+		      e1000_igp_2_cable_length_table[max_agc_index]);
+	agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
+
+	/* Calculate cable length with the error range of +/- 10 meters. */
+	phy->min_cable_length = (((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+				 (agc_value - IGP02E1000_AGC_RANGE) : 0);
+	phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
+
+	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+	return 0;
+}
+
+/**
+ *  e1000e_get_phy_info_m88 - Retrieve PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Valid for only copper links.  Read the PHY status register (sticky read)
+ *  to verify that link is up.  Read the PHY special control register to
+ *  determine the polarity and 10base-T extended distance.  Read the PHY
+ *  special status register to determine MDI/MDIx and current speed.  If
+ *  speed is 1000, then determine cable length, local and remote receiver.
+ **/
+s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	if (phy->media_type != e1000_media_type_copper) {
+		e_dbg("Phy info is only valid for copper media\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		e_dbg("Phy info is only valid if link is up\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy->polarity_correction = !!(phy_data &
+				      M88E1000_PSCR_POLARITY_REVERSAL);
+
+	ret_val = e1000_check_polarity_m88(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX);
+
+	if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+		ret_val = hw->phy.ops.get_cable_length(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = e1e_rphy(hw, MII_STAT1000, &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		phy->local_rx = (phy_data & LPA_1000LOCALRXOK)
+		    ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (phy_data & LPA_1000REMRXOK)
+		    ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+	} else {
+		/* Set values to "undefined" */
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_get_phy_info_igp - Retrieve igp PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Read PHY status to determine if link is up.  If link is up, then
+ *  set/determine 10base-T extended distance and polarity correction.  Read
+ *  PHY port status to determine MDI/MDIx and speed.  Based on the speed,
+ *  determine on the cable length, local and remote receiver.
+ **/
+s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		e_dbg("Phy info is only valid if link is up\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	phy->polarity_correction = true;
+
+	ret_val = e1000_check_polarity_igp(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX);
+
+	if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+	    IGP01E1000_PSSR_SPEED_1000MBPS) {
+		ret_val = phy->ops.get_cable_length(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = e1e_rphy(hw, MII_STAT1000, &data);
+		if (ret_val)
+			return ret_val;
+
+		phy->local_rx = (data & LPA_1000LOCALRXOK)
+		    ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (data & LPA_1000REMRXOK)
+		    ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+	} else {
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_phy_info_ife - Retrieves various IFE PHY states
+ *  @hw: pointer to the HW structure
+ *
+ *  Populates "phy" structure with various feature states.
+ **/
+s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		e_dbg("Phy info is only valid if link is up\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
+	if (ret_val)
+		return ret_val;
+	phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE);
+
+	if (phy->polarity_correction) {
+		ret_val = e1000_check_polarity_ife(hw);
+		if (ret_val)
+			return ret_val;
+	} else {
+		/* Polarity is forced */
+		phy->cable_polarity = ((data & IFE_PSC_FORCE_POLARITY)
+				       ? e1000_rev_polarity_reversed
+				       : e1000_rev_polarity_normal);
+	}
+
+	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS);
+
+	/* The following parameters are undefined for 10/100 operation. */
+	phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+	phy->local_rx = e1000_1000t_rx_status_undefined;
+	phy->remote_rx = e1000_1000t_rx_status_undefined;
+
+	return 0;
+}
+
+/**
+ *  e1000e_phy_sw_reset - PHY software reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Does a software reset of the PHY by reading the PHY control register and
+ *  setting/write the control register reset bit to the PHY.
+ **/
+s32 e1000e_phy_sw_reset(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_ctrl;
+
+	ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	phy_ctrl |= BMCR_RESET;
+	ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl);
+	if (ret_val)
+		return ret_val;
+
+	udelay(1);
+
+	return ret_val;
+}
+
+/**
+ *  e1000e_phy_hw_reset_generic - PHY hardware reset
+ *  @hw: pointer to the HW structure
+ *
+ *  Verify the reset block is not blocking us from resetting.  Acquire
+ *  semaphore (if necessary) and read/set/write the device control reset
+ *  bit in the PHY.  Wait the appropriate delay time for the device to
+ *  reset and release the semaphore (if necessary).
+ **/
+s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u32 ctrl;
+
+	if (phy->ops.check_reset_block) {
+		ret_val = phy->ops.check_reset_block(hw);
+		if (ret_val)
+			return 0;
+	}
+
+	ret_val = phy->ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ctrl = er32(CTRL);
+	ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
+	e1e_flush();
+
+	udelay(phy->reset_delay_us);
+
+	ew32(CTRL, ctrl);
+	e1e_flush();
+
+	usleep_range(150, 300);
+
+	phy->ops.release(hw);
+
+	return phy->ops.get_cfg_done(hw);
+}
+
+/**
+ *  e1000e_get_cfg_done_generic - Generic configuration done
+ *  @hw: pointer to the HW structure
+ *
+ *  Generic function to wait 10 milli-seconds for configuration to complete
+ *  and return success.
+ **/
+s32 e1000e_get_cfg_done_generic(struct e1000_hw __always_unused *hw)
+{
+	mdelay(10);
+
+	return 0;
+}
+
+/**
+ *  e1000e_phy_init_script_igp3 - Inits the IGP3 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
+ **/
+s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
+{
+	e_dbg("Running IGP 3 PHY init script\n");
+
+	/* PHY init IGP 3 */
+	/* Enable rise/fall, 10-mode work in class-A */
+	e1e_wphy(hw, 0x2F5B, 0x9018);
+	/* Remove all caps from Replica path filter */
+	e1e_wphy(hw, 0x2F52, 0x0000);
+	/* Bias trimming for ADC, AFE and Driver (Default) */
+	e1e_wphy(hw, 0x2FB1, 0x8B24);
+	/* Increase Hybrid poly bias */
+	e1e_wphy(hw, 0x2FB2, 0xF8F0);
+	/* Add 4% to Tx amplitude in Gig mode */
+	e1e_wphy(hw, 0x2010, 0x10B0);
+	/* Disable trimming (TTT) */
+	e1e_wphy(hw, 0x2011, 0x0000);
+	/* Poly DC correction to 94.6% + 2% for all channels */
+	e1e_wphy(hw, 0x20DD, 0x249A);
+	/* ABS DC correction to 95.9% */
+	e1e_wphy(hw, 0x20DE, 0x00D3);
+	/* BG temp curve trim */
+	e1e_wphy(hw, 0x28B4, 0x04CE);
+	/* Increasing ADC OPAMP stage 1 currents to max */
+	e1e_wphy(hw, 0x2F70, 0x29E4);
+	/* Force 1000 ( required for enabling PHY regs configuration) */
+	e1e_wphy(hw, 0x0000, 0x0140);
+	/* Set upd_freq to 6 */
+	e1e_wphy(hw, 0x1F30, 0x1606);
+	/* Disable NPDFE */
+	e1e_wphy(hw, 0x1F31, 0xB814);
+	/* Disable adaptive fixed FFE (Default) */
+	e1e_wphy(hw, 0x1F35, 0x002A);
+	/* Enable FFE hysteresis */
+	e1e_wphy(hw, 0x1F3E, 0x0067);
+	/* Fixed FFE for short cable lengths */
+	e1e_wphy(hw, 0x1F54, 0x0065);
+	/* Fixed FFE for medium cable lengths */
+	e1e_wphy(hw, 0x1F55, 0x002A);
+	/* Fixed FFE for long cable lengths */
+	e1e_wphy(hw, 0x1F56, 0x002A);
+	/* Enable Adaptive Clip Threshold */
+	e1e_wphy(hw, 0x1F72, 0x3FB0);
+	/* AHT reset limit to 1 */
+	e1e_wphy(hw, 0x1F76, 0xC0FF);
+	/* Set AHT master delay to 127 msec */
+	e1e_wphy(hw, 0x1F77, 0x1DEC);
+	/* Set scan bits for AHT */
+	e1e_wphy(hw, 0x1F78, 0xF9EF);
+	/* Set AHT Preset bits */
+	e1e_wphy(hw, 0x1F79, 0x0210);
+	/* Change integ_factor of channel A to 3 */
+	e1e_wphy(hw, 0x1895, 0x0003);
+	/* Change prop_factor of channels BCD to 8 */
+	e1e_wphy(hw, 0x1796, 0x0008);
+	/* Change cg_icount + enable integbp for channels BCD */
+	e1e_wphy(hw, 0x1798, 0xD008);
+	/* Change cg_icount + enable integbp + change prop_factor_master
+	 * to 8 for channel A
+	 */
+	e1e_wphy(hw, 0x1898, 0xD918);
+	/* Disable AHT in Slave mode on channel A */
+	e1e_wphy(hw, 0x187A, 0x0800);
+	/* Enable LPLU and disable AN to 1000 in non-D0a states,
+	 * Enable SPD+B2B
+	 */
+	e1e_wphy(hw, 0x0019, 0x008D);
+	/* Enable restart AN on an1000_dis change */
+	e1e_wphy(hw, 0x001B, 0x2080);
+	/* Enable wh_fifo read clock in 10/100 modes */
+	e1e_wphy(hw, 0x0014, 0x0045);
+	/* Restart AN, Speed selection is 1000 */
+	e1e_wphy(hw, 0x0000, 0x1340);
+
+	return 0;
+}
+
+/**
+ *  e1000e_get_phy_type_from_id - Get PHY type from id
+ *  @phy_id: phy_id read from the phy
+ *
+ *  Returns the phy type from the id.
+ **/
+enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
+{
+	enum e1000_phy_type phy_type = e1000_phy_unknown;
+
+	switch (phy_id) {
+	case M88E1000_I_PHY_ID:
+	case M88E1000_E_PHY_ID:
+	case M88E1111_I_PHY_ID:
+	case M88E1011_I_PHY_ID:
+		phy_type = e1000_phy_m88;
+		break;
+	case IGP01E1000_I_PHY_ID:	/* IGP 1 & 2 share this */
+		phy_type = e1000_phy_igp_2;
+		break;
+	case GG82563_E_PHY_ID:
+		phy_type = e1000_phy_gg82563;
+		break;
+	case IGP03E1000_E_PHY_ID:
+		phy_type = e1000_phy_igp_3;
+		break;
+	case IFE_E_PHY_ID:
+	case IFE_PLUS_E_PHY_ID:
+	case IFE_C_E_PHY_ID:
+		phy_type = e1000_phy_ife;
+		break;
+	case BME1000_E_PHY_ID:
+	case BME1000_E_PHY_ID_R2:
+		phy_type = e1000_phy_bm;
+		break;
+	case I82578_E_PHY_ID:
+		phy_type = e1000_phy_82578;
+		break;
+	case I82577_E_PHY_ID:
+		phy_type = e1000_phy_82577;
+		break;
+	case I82579_E_PHY_ID:
+		phy_type = e1000_phy_82579;
+		break;
+	case I217_E_PHY_ID:
+		phy_type = e1000_phy_i217;
+		break;
+	default:
+		phy_type = e1000_phy_unknown;
+		break;
+	}
+	return phy_type;
+}
+
+/**
+ *  e1000e_determine_phy_address - Determines PHY address.
+ *  @hw: pointer to the HW structure
+ *
+ *  This uses a trial and error method to loop through possible PHY
+ *  addresses. It tests each by reading the PHY ID registers and
+ *  checking for a match.
+ **/
+s32 e1000e_determine_phy_address(struct e1000_hw *hw)
+{
+	u32 phy_addr = 0;
+	u32 i;
+	enum e1000_phy_type phy_type = e1000_phy_unknown;
+
+	hw->phy.id = phy_type;
+
+	for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
+		hw->phy.addr = phy_addr;
+		i = 0;
+
+		do {
+			e1000e_get_phy_id(hw);
+			phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
+
+			/* If phy_type is valid, break - we found our
+			 * PHY address
+			 */
+			if (phy_type != e1000_phy_unknown)
+				return 0;
+
+			usleep_range(1000, 2000);
+			i++;
+		} while (i < 10);
+	}
+
+	return -E1000_ERR_PHY_TYPE;
+}
+
+/**
+ *  e1000_get_phy_addr_for_bm_page - Retrieve PHY page address
+ *  @page: page to access
+ *
+ *  Returns the phy address for the page requested.
+ **/
+static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg)
+{
+	u32 phy_addr = 2;
+
+	if ((page >= 768) || (page == 0 && reg == 25) || (reg == 31))
+		phy_addr = 1;
+
+	return phy_addr;
+}
+
+/**
+ *  e1000e_write_phy_reg_bm - Write BM PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+	u32 page = offset >> IGP_PAGE_SHIFT;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
+							 false, false);
+		goto release;
+	}
+
+	hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		u32 page_shift, page_select;
+
+		/* Page select is register 31 for phy address 1 and 22 for
+		 * phy address 2 and 3. Page select is shifted only for
+		 * phy address 1.
+		 */
+		if (hw->phy.addr == 1) {
+			page_shift = IGP_PAGE_SHIFT;
+			page_select = IGP01E1000_PHY_PAGE_SELECT;
+		} else {
+			page_shift = 0;
+			page_select = BM_PHY_PAGE_SELECT;
+		}
+
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
+						    (page << page_shift));
+		if (ret_val)
+			goto release;
+	}
+
+	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					    data);
+
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  e1000e_read_phy_reg_bm - Read BM PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+	u32 page = offset >> IGP_PAGE_SHIFT;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
+							 true, false);
+		goto release;
+	}
+
+	hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		u32 page_shift, page_select;
+
+		/* Page select is register 31 for phy address 1 and 22 for
+		 * phy address 2 and 3. Page select is shifted only for
+		 * phy address 1.
+		 */
+		if (hw->phy.addr == 1) {
+			page_shift = IGP_PAGE_SHIFT;
+			page_select = IGP01E1000_PHY_PAGE_SELECT;
+		} else {
+			page_shift = 0;
+			page_select = BM_PHY_PAGE_SELECT;
+		}
+
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
+						    (page << page_shift));
+		if (ret_val)
+			goto release;
+	}
+
+	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					   data);
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  e1000e_read_phy_reg_bm2 - Read BM PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+	u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
+							 true, false);
+		goto release;
+	}
+
+	hw->phy.addr = 1;
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
+						    page);
+
+		if (ret_val)
+			goto release;
+	}
+
+	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					   data);
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  e1000e_write_phy_reg_bm2 - Write BM PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+	u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
+							 false, false);
+		goto release;
+	}
+
+	hw->phy.addr = 1;
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
+						    page);
+
+		if (ret_val)
+			goto release;
+	}
+
+	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+					    data);
+
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+
+/**
+ *  e1000_enable_phy_wakeup_reg_access_bm - enable access to BM wakeup registers
+ *  @hw: pointer to the HW structure
+ *  @phy_reg: pointer to store original contents of BM_WUC_ENABLE_REG
+ *
+ *  Assumes semaphore already acquired and phy_reg points to a valid memory
+ *  address to store contents of the BM_WUC_ENABLE_REG register.
+ **/
+s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
+{
+	s32 ret_val;
+	u16 temp;
+
+	/* All page select, port ctrl and wakeup registers use phy address 1 */
+	hw->phy.addr = 1;
+
+	/* Select Port Control Registers page */
+	ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
+	if (ret_val) {
+		e_dbg("Could not set Port Control page\n");
+		return ret_val;
+	}
+
+	ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+	if (ret_val) {
+		e_dbg("Could not read PHY register %d.%d\n",
+		      BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+		return ret_val;
+	}
+
+	/* Enable both PHY wakeup mode and Wakeup register page writes.
+	 * Prevent a power state change by disabling ME and Host PHY wakeup.
+	 */
+	temp = *phy_reg;
+	temp |= BM_WUC_ENABLE_BIT;
+	temp &= ~(BM_WUC_ME_WU_BIT | BM_WUC_HOST_WU_BIT);
+
+	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, temp);
+	if (ret_val) {
+		e_dbg("Could not write PHY register %d.%d\n",
+		      BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+		return ret_val;
+	}
+
+	/* Select Host Wakeup Registers page - caller now able to write
+	 * registers on the Wakeup registers page
+	 */
+	return e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
+}
+
+/**
+ *  e1000_disable_phy_wakeup_reg_access_bm - disable access to BM wakeup regs
+ *  @hw: pointer to the HW structure
+ *  @phy_reg: pointer to original contents of BM_WUC_ENABLE_REG
+ *
+ *  Restore BM_WUC_ENABLE_REG to its original value.
+ *
+ *  Assumes semaphore already acquired and *phy_reg is the contents of the
+ *  BM_WUC_ENABLE_REG before register(s) on BM_WUC_PAGE were accessed by
+ *  caller.
+ **/
+s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
+{
+	s32 ret_val;
+
+	/* Select Port Control Registers page */
+	ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
+	if (ret_val) {
+		e_dbg("Could not set Port Control page\n");
+		return ret_val;
+	}
+
+	/* Restore 769.17 to its original value */
+	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, *phy_reg);
+	if (ret_val)
+		e_dbg("Could not restore PHY register %d.%d\n",
+		      BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_access_phy_wakeup_reg_bm - Read/write BM PHY wakeup register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read or written
+ *  @data: pointer to the data to read or write
+ *  @read: determines if operation is read or write
+ *  @page_set: BM_WUC_PAGE already set and access enabled
+ *
+ *  Read the PHY register at offset and store the retrieved information in
+ *  data, or write data to PHY register at offset.  Note the procedure to
+ *  access the PHY wakeup registers is different than reading the other PHY
+ *  registers. It works as such:
+ *  1) Set 769.17.2 (page 769, register 17, bit 2) = 1
+ *  2) Set page to 800 for host (801 if we were manageability)
+ *  3) Write the address using the address opcode (0x11)
+ *  4) Read or write the data using the data opcode (0x12)
+ *  5) Restore 769.17.2 to its original value
+ *
+ *  Steps 1 and 2 are done by e1000_enable_phy_wakeup_reg_access_bm() and
+ *  step 5 is done by e1000_disable_phy_wakeup_reg_access_bm().
+ *
+ *  Assumes semaphore is already acquired.  When page_set==true, assumes
+ *  the PHY page is set to BM_WUC_PAGE (i.e. a function in the call stack
+ *  is responsible for calls to e1000_[enable|disable]_phy_wakeup_reg_bm()).
+ **/
+static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
+					  u16 *data, bool read, bool page_set)
+{
+	s32 ret_val;
+	u16 reg = BM_PHY_REG_NUM(offset);
+	u16 page = BM_PHY_REG_PAGE(offset);
+	u16 phy_reg = 0;
+
+	/* Gig must be disabled for MDIO accesses to Host Wakeup reg page */
+	if ((hw->mac.type == e1000_pchlan) &&
+	    (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
+		e_dbg("Attempting to access page %d while gig enabled.\n",
+		      page);
+
+	if (!page_set) {
+		/* Enable access to PHY wakeup registers */
+		ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+		if (ret_val) {
+			e_dbg("Could not enable PHY wakeup reg access\n");
+			return ret_val;
+		}
+	}
+
+	e_dbg("Accessing PHY page %d reg 0x%x\n", page, reg);
+
+	/* Write the Wakeup register page offset value using opcode 0x11 */
+	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
+	if (ret_val) {
+		e_dbg("Could not write address opcode to page %d\n", page);
+		return ret_val;
+	}
+
+	if (read) {
+		/* Read the Wakeup register page value using opcode 0x12 */
+		ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
+						   data);
+	} else {
+		/* Write the Wakeup register page value using opcode 0x12 */
+		ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
+						    *data);
+	}
+
+	if (ret_val) {
+		e_dbg("Could not access PHY reg %d.%d\n", page, reg);
+		return ret_val;
+	}
+
+	if (!page_set)
+		ret_val = e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+
+	return ret_val;
+}
+
+/**
+ * e1000_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_up_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	e1e_rphy(hw, MII_BMCR, &mii_reg);
+	mii_reg &= ~BMCR_PDOWN;
+	e1e_wphy(hw, MII_BMCR, mii_reg);
+}
+
+/**
+ * e1000_power_down_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_down_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	e1e_rphy(hw, MII_BMCR, &mii_reg);
+	mii_reg |= BMCR_PDOWN;
+	e1e_wphy(hw, MII_BMCR, mii_reg);
+	usleep_range(1000, 2000);
+}
+
+/**
+ *  __e1000_read_phy_reg_hv -  Read HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and stores the retrieved information in data.  Release any acquired
+ *  semaphore before exiting.
+ **/
+static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
+				   bool locked, bool page_set)
+{
+	s32 ret_val;
+	u16 page = BM_PHY_REG_PAGE(offset);
+	u16 reg = BM_PHY_REG_NUM(offset);
+	u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+
+	if (!locked) {
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
+							 true, page_set);
+		goto out;
+	}
+
+	if (page > 0 && page < HV_INTC_FC_PAGE_START) {
+		ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
+							 data, true);
+		goto out;
+	}
+
+	if (!page_set) {
+		if (page == HV_INTC_FC_PAGE_START)
+			page = 0;
+
+		if (reg > MAX_PHY_MULTI_PAGE_REG) {
+			/* Page is shifted left, PHY expects (page x 32) */
+			ret_val = e1000_set_page_igp(hw,
+						     (page << IGP_PAGE_SHIFT));
+
+			hw->phy.addr = phy_addr;
+
+			if (ret_val)
+				goto out;
+		}
+	}
+
+	e_dbg("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
+	      page << IGP_PAGE_SHIFT, reg);
+
+	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data);
+out:
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_phy_reg_hv -  Read HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore then reads the PHY register at offset and stores
+ *  the retrieved information in data.  Release the acquired semaphore
+ *  before exiting.
+ **/
+s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000_read_phy_reg_hv(hw, offset, data, false, false);
+}
+
+/**
+ *  e1000_read_phy_reg_hv_locked -  Read HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset and stores the retrieved information
+ *  in data.  Assumes semaphore already acquired.
+ **/
+s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000_read_phy_reg_hv(hw, offset, data, true, false);
+}
+
+/**
+ *  e1000_read_phy_reg_page_hv - Read HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Reads the PHY register at offset and stores the retrieved information
+ *  in data.  Assumes semaphore already acquired and page already set.
+ **/
+s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000_read_phy_reg_hv(hw, offset, data, true, true);
+}
+
+/**
+ *  __e1000_write_phy_reg_hv - Write HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *  @locked: semaphore has already been acquired or not
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
+				    bool locked, bool page_set)
+{
+	s32 ret_val;
+	u16 page = BM_PHY_REG_PAGE(offset);
+	u16 reg = BM_PHY_REG_NUM(offset);
+	u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+
+	if (!locked) {
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
+							 false, page_set);
+		goto out;
+	}
+
+	if (page > 0 && page < HV_INTC_FC_PAGE_START) {
+		ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
+							 &data, false);
+		goto out;
+	}
+
+	if (!page_set) {
+		if (page == HV_INTC_FC_PAGE_START)
+			page = 0;
+
+		/* Workaround MDIO accesses being disabled after entering IEEE
+		 * Power Down (when bit 11 of the PHY Control register is set)
+		 */
+		if ((hw->phy.type == e1000_phy_82578) &&
+		    (hw->phy.revision >= 1) &&
+		    (hw->phy.addr == 2) &&
+		    !(MAX_PHY_REG_ADDRESS & reg) && (data & (1 << 11))) {
+			u16 data2 = 0x7EFF;
+
+			ret_val = e1000_access_phy_debug_regs_hv(hw,
+								 (1 << 6) | 0x3,
+								 &data2, false);
+			if (ret_val)
+				goto out;
+		}
+
+		if (reg > MAX_PHY_MULTI_PAGE_REG) {
+			/* Page is shifted left, PHY expects (page x 32) */
+			ret_val = e1000_set_page_igp(hw,
+						     (page << IGP_PAGE_SHIFT));
+
+			hw->phy.addr = phy_addr;
+
+			if (ret_val)
+				goto out;
+		}
+	}
+
+	e_dbg("writing PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
+	      page << IGP_PAGE_SHIFT, reg);
+
+	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
+					    data);
+
+out:
+	if (!locked)
+		hw->phy.ops.release(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_phy_reg_hv - Write HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore then writes the data to PHY register at the offset.
+ *  Release the acquired semaphores before exiting.
+ **/
+s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000_write_phy_reg_hv(hw, offset, data, false, false);
+}
+
+/**
+ *  e1000_write_phy_reg_hv_locked - Write HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset.  Assumes semaphore
+ *  already acquired.
+ **/
+s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000_write_phy_reg_hv(hw, offset, data, true, false);
+}
+
+/**
+ *  e1000_write_phy_reg_page_hv - Write HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset.  Assumes semaphore
+ *  already acquired and page already set.
+ **/
+s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000_write_phy_reg_hv(hw, offset, data, true, true);
+}
+
+/**
+ *  e1000_get_phy_addr_for_hv_page - Get PHY address based on page
+ *  @page: page to be accessed
+ **/
+static u32 e1000_get_phy_addr_for_hv_page(u32 page)
+{
+	u32 phy_addr = 2;
+
+	if (page >= HV_INTC_FC_PAGE_START)
+		phy_addr = 1;
+
+	return phy_addr;
+}
+
+/**
+ *  e1000_access_phy_debug_regs_hv - Read HV PHY vendor specific high registers
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read or written
+ *  @data: pointer to the data to be read or written
+ *  @read: determines if operation is read or write
+ *
+ *  Reads the PHY register at offset and stores the retreived information
+ *  in data.  Assumes semaphore already acquired.  Note that the procedure
+ *  to access these regs uses the address port and data port to read/write.
+ *  These accesses done with PHY address 2 and without using pages.
+ **/
+static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
+					  u16 *data, bool read)
+{
+	s32 ret_val;
+	u32 addr_reg;
+	u32 data_reg;
+
+	/* This takes care of the difference with desktop vs mobile phy */
+	addr_reg = ((hw->phy.type == e1000_phy_82578) ?
+		    I82578_ADDR_REG : I82577_ADDR_REG);
+	data_reg = addr_reg + 1;
+
+	/* All operations in this function are phy address 2 */
+	hw->phy.addr = 2;
+
+	/* masking with 0x3F to remove the page from offset */
+	ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
+	if (ret_val) {
+		e_dbg("Could not write the Address Offset port register\n");
+		return ret_val;
+	}
+
+	/* Read or write the data value next */
+	if (read)
+		ret_val = e1000e_read_phy_reg_mdic(hw, data_reg, data);
+	else
+		ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
+
+	if (ret_val)
+		e_dbg("Could not access the Data port register\n");
+
+	return ret_val;
+}
+
+/**
+ *  e1000_link_stall_workaround_hv - Si workaround
+ *  @hw: pointer to the HW structure
+ *
+ *  This function works around a Si bug where the link partner can get
+ *  a link up indication before the PHY does.  If small packets are sent
+ *  by the link partner they can be placed in the packet buffer without
+ *  being properly accounted for by the PHY and will stall preventing
+ *  further packets from being received.  The workaround is to clear the
+ *  packet buffer after the PHY detects link up.
+ **/
+s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 data;
+
+	if (hw->phy.type != e1000_phy_82578)
+		return 0;
+
+	/* Do not apply workaround if in PHY loopback bit 14 set */
+	e1e_rphy(hw, MII_BMCR, &data);
+	if (data & BMCR_LOOPBACK)
+		return 0;
+
+	/* check if link is up and at 1Gbps */
+	ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
+	if (ret_val)
+		return ret_val;
+
+	data &= (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
+		 BM_CS_STATUS_SPEED_MASK);
+
+	if (data != (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
+		     BM_CS_STATUS_SPEED_1000))
+		return 0;
+
+	msleep(200);
+
+	/* flush the packets in the fifo buffer */
+	ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL,
+			   (HV_MUX_DATA_CTRL_GEN_TO_MAC |
+			    HV_MUX_DATA_CTRL_FORCE_SPEED));
+	if (ret_val)
+		return ret_val;
+
+	return e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
+}
+
+/**
+ *  e1000_check_polarity_82577 - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY specific status register.
+ **/
+s32 e1000_check_polarity_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = ((data & I82577_PHY_STATUS2_REV_POLARITY)
+				       ? e1000_rev_polarity_reversed
+				       : e1000_rev_polarity_normal);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.
+ **/
+s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	ret_val = e1e_rphy(hw, MII_BMCR, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = e1e_wphy(hw, MII_BMCR, phy_data);
+	if (ret_val)
+		return ret_val;
+
+	udelay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
+
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
+		if (ret_val)
+			return ret_val;
+
+		if (!link)
+			e_dbg("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_phy_info_82577 - Retrieve I82577 PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Read PHY status to determine if link is up.  If link is up, then
+ *  set/determine 10base-T extended distance and polarity correction.  Read
+ *  PHY port status to determine MDI/MDIx and speed.  Based on the speed,
+ *  determine on the cable length, local and remote receiver.
+ **/
+s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+
+	if (!link) {
+		e_dbg("Phy info is only valid if link is up\n");
+		return -E1000_ERR_CONFIG;
+	}
+
+	phy->polarity_correction = true;
+
+	ret_val = e1000_check_polarity_82577(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
+	if (ret_val)
+		return ret_val;
+
+	phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX);
+
+	if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
+	    I82577_PHY_STATUS2_SPEED_1000MBPS) {
+		ret_val = hw->phy.ops.get_cable_length(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val = e1e_rphy(hw, MII_STAT1000, &data);
+		if (ret_val)
+			return ret_val;
+
+		phy->local_rx = (data & LPA_1000LOCALRXOK)
+		    ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (data & LPA_1000REMRXOK)
+		    ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+	} else {
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+	return 0;
+}
+
+/**
+ *  e1000_get_cable_length_82577 - Determine cable length for 82577 PHY
+ *  @hw: pointer to the HW structure
+ *
+ * Reads the diagnostic status register and verifies result is valid before
+ * placing it in the phy_cable_length field.
+ **/
+s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, length;
+
+	ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
+		  I82577_DSTATUS_CABLE_LENGTH_SHIFT);
+
+	if (length == E1000_CABLE_LENGTH_UNDEFINED)
+		return -E1000_ERR_PHY;
+
+	phy->cable_length = length;
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/intel/e1000e/phy.h b/drivers/net/ethernet/intel/e1000e/phy.h
new file mode 100644
index 000000000..537d2780b
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/phy.h
@@ -0,0 +1,236 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000E_PHY_H_
+#define _E1000E_PHY_H_
+
+s32 e1000e_check_downshift(struct e1000_hw *hw);
+s32 e1000_check_polarity_m88(struct e1000_hw *hw);
+s32 e1000_check_polarity_igp(struct e1000_hw *hw);
+s32 e1000_check_polarity_ife(struct e1000_hw *hw);
+s32 e1000e_check_reset_block_generic(struct e1000_hw *hw);
+s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
+s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
+s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
+s32 e1000e_get_cable_length_m88(struct e1000_hw *hw);
+s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
+s32 e1000e_get_cfg_done_generic(struct e1000_hw *hw);
+s32 e1000e_get_phy_id(struct e1000_hw *hw);
+s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
+s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
+s32 e1000_get_phy_info_ife(struct e1000_hw *hw);
+s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
+void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
+s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
+s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
+s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page);
+s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+s32 e1000e_setup_copper_link(struct e1000_hw *hw);
+s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
+				u32 usec_interval, bool *success);
+s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw);
+enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
+s32 e1000e_determine_phy_address(struct e1000_hw *hw);
+s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg);
+s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg);
+s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
+void e1000_power_up_phy_copper(struct e1000_hw *hw);
+void e1000_power_down_phy_copper(struct e1000_hw *hw);
+s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
+s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
+s32 e1000_check_polarity_82577(struct e1000_hw *hw);
+s32 e1000_get_phy_info_82577(struct e1000_hw *hw);
+s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw);
+s32 e1000_get_cable_length_82577(struct e1000_hw *hw);
+
+#define E1000_MAX_PHY_ADDR		8
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG	0x10	/* Port Config */
+#define IGP01E1000_PHY_PORT_STATUS	0x11	/* Status */
+#define IGP01E1000_PHY_PORT_CTRL	0x12	/* Control */
+#define IGP01E1000_PHY_LINK_HEALTH	0x13	/* PHY Link Health */
+#define IGP02E1000_PHY_POWER_MGMT	0x19	/* Power Management */
+#define IGP01E1000_PHY_PAGE_SELECT	0x1F	/* Page Select */
+#define BM_PHY_PAGE_SELECT		22	/* Page Select for BM */
+#define IGP_PAGE_SHIFT			5
+#define PHY_REG_MASK			0x1F
+
+/* BM/HV Specific Registers */
+#define BM_PORT_CTRL_PAGE		769
+#define BM_WUC_PAGE			800
+#define BM_WUC_ADDRESS_OPCODE		0x11
+#define BM_WUC_DATA_OPCODE		0x12
+#define BM_WUC_ENABLE_PAGE		BM_PORT_CTRL_PAGE
+#define BM_WUC_ENABLE_REG		17
+#define BM_WUC_ENABLE_BIT		(1 << 2)
+#define BM_WUC_HOST_WU_BIT		(1 << 4)
+#define BM_WUC_ME_WU_BIT		(1 << 5)
+
+#define PHY_UPPER_SHIFT			21
+#define BM_PHY_REG(page, reg) \
+	(((reg) & MAX_PHY_REG_ADDRESS) |\
+	 (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\
+	 (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)))
+#define BM_PHY_REG_PAGE(offset) \
+	((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF))
+#define BM_PHY_REG_NUM(offset) \
+	((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\
+	 (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\
+		~MAX_PHY_REG_ADDRESS)))
+
+#define HV_INTC_FC_PAGE_START		768
+#define I82578_ADDR_REG			29
+#define I82577_ADDR_REG			16
+#define I82577_CFG_REG			22
+#define I82577_CFG_ASSERT_CRS_ON_TX	(1 << 15)
+#define I82577_CFG_ENABLE_DOWNSHIFT	(3 << 10)	/* auto downshift */
+#define I82577_CTRL_REG			23
+
+/* 82577 specific PHY registers */
+#define I82577_PHY_CTRL_2		18
+#define I82577_PHY_LBK_CTRL		19
+#define I82577_PHY_STATUS_2		26
+#define I82577_PHY_DIAG_STATUS		31
+
+/* I82577 PHY Status 2 */
+#define I82577_PHY_STATUS2_REV_POLARITY		0x0400
+#define I82577_PHY_STATUS2_MDIX			0x0800
+#define I82577_PHY_STATUS2_SPEED_MASK		0x0300
+#define I82577_PHY_STATUS2_SPEED_1000MBPS	0x0200
+
+/* I82577 PHY Control 2 */
+#define I82577_PHY_CTRL2_MANUAL_MDIX		0x0200
+#define I82577_PHY_CTRL2_AUTO_MDI_MDIX		0x0400
+#define I82577_PHY_CTRL2_MDIX_CFG_MASK		0x0600
+
+/* I82577 PHY Diagnostics Status */
+#define I82577_DSTATUS_CABLE_LENGTH		0x03FC
+#define I82577_DSTATUS_CABLE_LENGTH_SHIFT	2
+
+/* BM PHY Copper Specific Control 1 */
+#define BM_CS_CTRL1			16
+
+/* BM PHY Copper Specific Status */
+#define BM_CS_STATUS			17
+#define BM_CS_STATUS_LINK_UP		0x0400
+#define BM_CS_STATUS_RESOLVED		0x0800
+#define BM_CS_STATUS_SPEED_MASK		0xC000
+#define BM_CS_STATUS_SPEED_1000		0x8000
+
+/* 82577 Mobile Phy Status Register */
+#define HV_M_STATUS			26
+#define HV_M_STATUS_AUTONEG_COMPLETE	0x1000
+#define HV_M_STATUS_SPEED_MASK		0x0300
+#define HV_M_STATUS_SPEED_1000		0x0200
+#define HV_M_STATUS_SPEED_100		0x0100
+#define HV_M_STATUS_LINK_UP		0x0040
+
+#define IGP01E1000_PHY_PCS_INIT_REG	0x00B4
+#define IGP01E1000_PHY_POLARITY_MASK	0x0078
+
+#define IGP01E1000_PSCR_AUTO_MDIX	0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX	0x2000	/* 0=MDI, 1=MDIX */
+
+#define IGP01E1000_PSCFR_SMART_SPEED	0x0080
+
+#define IGP02E1000_PM_SPD		0x0001	/* Smart Power Down */
+#define IGP02E1000_PM_D0_LPLU		0x0002	/* For D0a states */
+#define IGP02E1000_PM_D3_LPLU		0x0004	/* For all other states */
+
+#define IGP01E1000_PLHR_SS_DOWNGRADE	0x8000
+
+#define IGP01E1000_PSSR_POLARITY_REVERSED	0x0002
+#define IGP01E1000_PSSR_MDIX		0x0800
+#define IGP01E1000_PSSR_SPEED_MASK	0xC000
+#define IGP01E1000_PSSR_SPEED_1000MBPS	0xC000
+
+#define IGP02E1000_PHY_CHANNEL_NUM	4
+#define IGP02E1000_PHY_AGC_A		0x11B1
+#define IGP02E1000_PHY_AGC_B		0x12B1
+#define IGP02E1000_PHY_AGC_C		0x14B1
+#define IGP02E1000_PHY_AGC_D		0x18B1
+
+#define IGP02E1000_AGC_LENGTH_SHIFT	9	/* Course=15:13, Fine=12:9 */
+#define IGP02E1000_AGC_LENGTH_MASK	0x7F
+#define IGP02E1000_AGC_RANGE		15
+
+#define E1000_CABLE_LENGTH_UNDEFINED	0xFF
+
+#define E1000_KMRNCTRLSTA_OFFSET	0x001F0000
+#define E1000_KMRNCTRLSTA_OFFSET_SHIFT	16
+#define E1000_KMRNCTRLSTA_REN		0x00200000
+#define E1000_KMRNCTRLSTA_CTRL_OFFSET	0x1	/* Kumeran Control */
+#define E1000_KMRNCTRLSTA_DIAG_OFFSET	0x3	/* Kumeran Diagnostic */
+#define E1000_KMRNCTRLSTA_TIMEOUTS	0x4	/* Kumeran Timeouts */
+#define E1000_KMRNCTRLSTA_INBAND_PARAM	0x9	/* Kumeran InBand Parameters */
+#define E1000_KMRNCTRLSTA_IBIST_DISABLE	0x0200	/* Kumeran IBIST Disable */
+#define E1000_KMRNCTRLSTA_DIAG_NELPBK	0x1000	/* Nearend Loopback mode */
+#define E1000_KMRNCTRLSTA_K1_CONFIG	0x7
+#define E1000_KMRNCTRLSTA_K1_ENABLE	0x0002	/* enable K1 */
+#define E1000_KMRNCTRLSTA_HD_CTRL	0x10	/* Kumeran HD Control */
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL	0x10
+#define IFE_PHY_SPECIAL_CONTROL		0x11	/* 100BaseTx PHY Special Ctrl */
+#define IFE_PHY_SPECIAL_CONTROL_LED	0x1B	/* PHY Special and LED Ctrl */
+#define IFE_PHY_MDIX_CONTROL		0x1C	/* MDI/MDI-X Control */
+
+/* IFE PHY Extended Status Control */
+#define IFE_PESC_POLARITY_REVERSED	0x0100
+
+/* IFE PHY Special Control */
+#define IFE_PSC_AUTO_POLARITY_DISABLE	0x0010
+#define IFE_PSC_FORCE_POLARITY		0x0020
+
+/* IFE PHY Special Control and LED Control */
+#define IFE_PSCL_PROBE_MODE		0x0020
+#define IFE_PSCL_PROBE_LEDS_OFF		0x0006	/* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON		0x0007	/* Force LEDs 0 and 2 on */
+
+/* IFE PHY MDIX Control */
+#define IFE_PMC_MDIX_STATUS		0x0020	/* 1=MDI-X, 0=MDI */
+#define IFE_PMC_FORCE_MDIX		0x0040	/* 1=force MDI-X, 0=force MDI */
+#define IFE_PMC_AUTO_MDIX		0x0080	/* 1=enable auto, 0=disable */
+
+#endif
diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c
new file mode 100644
index 000000000..8d7b21dc7
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/ptp.c
@@ -0,0 +1,273 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* PTP 1588 Hardware Clock (PHC)
+ * Derived from PTP Hardware Clock driver for Intel 82576 and 82580 (igb)
+ * Copyright (C) 2011 Richard Cochran <richardcochran@gmail.com>
+ */
+
+#include "e1000.h"
+
+/**
+ * e1000e_phc_adjfreq - adjust the frequency of the hardware clock
+ * @ptp: ptp clock structure
+ * @delta: Desired frequency change in parts per billion
+ *
+ * Adjust the frequency of the PHC cycle counter by the indicated delta from
+ * the base frequency.
+ **/
+static int e1000e_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta)
+{
+	struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+						     ptp_clock_info);
+	struct e1000_hw *hw = &adapter->hw;
+	bool neg_adj = false;
+	unsigned long flags;
+	u64 adjustment;
+	u32 timinca, incvalue;
+	s32 ret_val;
+
+	if ((delta > ptp->max_adj) || (delta <= -1000000000))
+		return -EINVAL;
+
+	if (delta < 0) {
+		neg_adj = true;
+		delta = -delta;
+	}
+
+	/* Get the System Time Register SYSTIM base frequency */
+	ret_val = e1000e_get_base_timinca(adapter, &timinca);
+	if (ret_val)
+		return ret_val;
+
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+
+	incvalue = timinca & E1000_TIMINCA_INCVALUE_MASK;
+
+	adjustment = incvalue;
+	adjustment *= delta;
+	adjustment = div_u64(adjustment, 1000000000);
+
+	incvalue = neg_adj ? (incvalue - adjustment) : (incvalue + adjustment);
+
+	timinca &= ~E1000_TIMINCA_INCVALUE_MASK;
+	timinca |= incvalue;
+
+	ew32(TIMINCA, timinca);
+
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+	return 0;
+}
+
+/**
+ * e1000e_phc_adjtime - Shift the time of the hardware clock
+ * @ptp: ptp clock structure
+ * @delta: Desired change in nanoseconds
+ *
+ * Adjust the timer by resetting the timecounter structure.
+ **/
+static int e1000e_phc_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+	struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+						     ptp_clock_info);
+	unsigned long flags;
+
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+	timecounter_adjtime(&adapter->tc, delta);
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+	return 0;
+}
+
+/**
+ * e1000e_phc_gettime - Reads the current time from the hardware clock
+ * @ptp: ptp clock structure
+ * @ts: timespec structure to hold the current time value
+ *
+ * Read the timecounter and return the correct value in ns after converting
+ * it into a struct timespec.
+ **/
+static int e1000e_phc_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
+{
+	struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+						     ptp_clock_info);
+	unsigned long flags;
+	u64 ns;
+
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+	ns = timecounter_read(&adapter->tc);
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+	*ts = ns_to_timespec64(ns);
+
+	return 0;
+}
+
+/**
+ * e1000e_phc_settime - Set the current time on the hardware clock
+ * @ptp: ptp clock structure
+ * @ts: timespec containing the new time for the cycle counter
+ *
+ * Reset the timecounter to use a new base value instead of the kernel
+ * wall timer value.
+ **/
+static int e1000e_phc_settime(struct ptp_clock_info *ptp,
+			      const struct timespec64 *ts)
+{
+	struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+						     ptp_clock_info);
+	unsigned long flags;
+	u64 ns;
+
+	ns = timespec64_to_ns(ts);
+
+	/* reset the timecounter */
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+	timecounter_init(&adapter->tc, &adapter->cc, ns);
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+	return 0;
+}
+
+/**
+ * e1000e_phc_enable - enable or disable an ancillary feature
+ * @ptp: ptp clock structure
+ * @request: Desired resource to enable or disable
+ * @on: Caller passes one to enable or zero to disable
+ *
+ * Enable (or disable) ancillary features of the PHC subsystem.
+ * Currently, no ancillary features are supported.
+ **/
+static int e1000e_phc_enable(struct ptp_clock_info __always_unused *ptp,
+			     struct ptp_clock_request __always_unused *request,
+			     int __always_unused on)
+{
+	return -EOPNOTSUPP;
+}
+
+static void e1000e_systim_overflow_work(struct work_struct *work)
+{
+	struct e1000_adapter *adapter = container_of(work, struct e1000_adapter,
+						     systim_overflow_work.work);
+	struct e1000_hw *hw = &adapter->hw;
+	struct timespec64 ts;
+
+	adapter->ptp_clock_info.gettime64(&adapter->ptp_clock_info, &ts);
+
+	e_dbg("SYSTIM overflow check at %lld.%09lu\n",
+	      (long long) ts.tv_sec, ts.tv_nsec);
+
+	schedule_delayed_work(&adapter->systim_overflow_work,
+			      E1000_SYSTIM_OVERFLOW_PERIOD);
+}
+
+static const struct ptp_clock_info e1000e_ptp_clock_info = {
+	.owner		= THIS_MODULE,
+	.n_alarm	= 0,
+	.n_ext_ts	= 0,
+	.n_per_out	= 0,
+	.n_pins		= 0,
+	.pps		= 0,
+	.adjfreq	= e1000e_phc_adjfreq,
+	.adjtime	= e1000e_phc_adjtime,
+	.gettime64	= e1000e_phc_gettime,
+	.settime64	= e1000e_phc_settime,
+	.enable		= e1000e_phc_enable,
+};
+
+/**
+ * e1000e_ptp_init - initialize PTP for devices which support it
+ * @adapter: board private structure
+ *
+ * This function performs the required steps for enabling PTP support.
+ * If PTP support has already been loaded it simply calls the cyclecounter
+ * init routine and exits.
+ **/
+void e1000e_ptp_init(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	adapter->ptp_clock = NULL;
+
+	if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+		return;
+
+	adapter->ptp_clock_info = e1000e_ptp_clock_info;
+
+	snprintf(adapter->ptp_clock_info.name,
+		 sizeof(adapter->ptp_clock_info.name), "%pm",
+		 adapter->netdev->perm_addr);
+
+	switch (hw->mac.type) {
+	case e1000_pch2lan:
+	case e1000_pch_lpt:
+	case e1000_pch_spt:
+		if (((hw->mac.type != e1000_pch_lpt) &&
+		     (hw->mac.type != e1000_pch_spt)) ||
+		    (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
+			adapter->ptp_clock_info.max_adj = 24000000 - 1;
+			break;
+		}
+		/* fall-through */
+	case e1000_82574:
+	case e1000_82583:
+		adapter->ptp_clock_info.max_adj = 600000000 - 1;
+		break;
+	default:
+		break;
+	}
+
+	INIT_DELAYED_WORK(&adapter->systim_overflow_work,
+			  e1000e_systim_overflow_work);
+
+	schedule_delayed_work(&adapter->systim_overflow_work,
+			      E1000_SYSTIM_OVERFLOW_PERIOD);
+
+	adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info,
+						&adapter->pdev->dev);
+	if (IS_ERR(adapter->ptp_clock)) {
+		adapter->ptp_clock = NULL;
+		e_err("ptp_clock_register failed\n");
+	} else {
+		e_info("registered PHC clock\n");
+	}
+}
+
+/**
+ * e1000e_ptp_remove - disable PTP device and stop the overflow check
+ * @adapter: board private structure
+ *
+ * Stop the PTP support, and cancel the delayed work.
+ **/
+void e1000e_ptp_remove(struct e1000_adapter *adapter)
+{
+	if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+		return;
+
+	cancel_delayed_work_sync(&adapter->systim_overflow_work);
+
+	if (adapter->ptp_clock) {
+		ptp_clock_unregister(adapter->ptp_clock);
+		adapter->ptp_clock = NULL;
+		e_info("removed PHC\n");
+	}
+}
diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h
new file mode 100644
index 000000000..85eefc483
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/regs.h
@@ -0,0 +1,250 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000E_REGS_H_
+#define _E1000E_REGS_H_
+
+#define E1000_CTRL	0x00000	/* Device Control - RW */
+#define E1000_STATUS	0x00008	/* Device Status - RO */
+#define E1000_EECD	0x00010	/* EEPROM/Flash Control - RW */
+#define E1000_EERD	0x00014	/* EEPROM Read - RW */
+#define E1000_CTRL_EXT	0x00018	/* Extended Device Control - RW */
+#define E1000_FLA	0x0001C	/* Flash Access - RW */
+#define E1000_MDIC	0x00020	/* MDI Control - RW */
+#define E1000_SCTL	0x00024	/* SerDes Control - RW */
+#define E1000_FCAL	0x00028	/* Flow Control Address Low - RW */
+#define E1000_FCAH	0x0002C	/* Flow Control Address High -RW */
+#define E1000_FEXT	0x0002C	/* Future Extended - RW */
+#define E1000_FEXTNVM	0x00028	/* Future Extended NVM - RW */
+#define E1000_FEXTNVM3	0x0003C	/* Future Extended NVM 3 - RW */
+#define E1000_FEXTNVM4	0x00024	/* Future Extended NVM 4 - RW */
+#define E1000_FEXTNVM6	0x00010	/* Future Extended NVM 6 - RW */
+#define E1000_FEXTNVM7	0x000E4	/* Future Extended NVM 7 - RW */
+#define E1000_PCIEANACFG	0x00F18	/* PCIE Analog Config */
+#define E1000_FCT	0x00030	/* Flow Control Type - RW */
+#define E1000_VET	0x00038	/* VLAN Ether Type - RW */
+#define E1000_ICR	0x000C0	/* Interrupt Cause Read - R/clr */
+#define E1000_ITR	0x000C4	/* Interrupt Throttling Rate - RW */
+#define E1000_ICS	0x000C8	/* Interrupt Cause Set - WO */
+#define E1000_IMS	0x000D0	/* Interrupt Mask Set - RW */
+#define E1000_IMC	0x000D8	/* Interrupt Mask Clear - WO */
+#define E1000_IAM	0x000E0	/* Interrupt Acknowledge Auto Mask */
+#define E1000_IVAR	0x000E4	/* Interrupt Vector Allocation Register - RW */
+#define E1000_SVCR	0x000F0
+#define E1000_SVT	0x000F4
+#define E1000_LPIC	0x000FC	/* Low Power IDLE control */
+#define E1000_RCTL	0x00100	/* Rx Control - RW */
+#define E1000_FCTTV	0x00170	/* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW	0x00178	/* Tx Configuration Word - RW */
+#define E1000_RXCW	0x00180	/* Rx Configuration Word - RO */
+#define E1000_PBA_ECC	0x01100	/* PBA ECC Register */
+#define E1000_TCTL	0x00400	/* Tx Control - RW */
+#define E1000_TCTL_EXT	0x00404	/* Extended Tx Control - RW */
+#define E1000_TIPG	0x00410	/* Tx Inter-packet gap -RW */
+#define E1000_AIT	0x00458	/* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL	0x00E00	/* LED Control - RW */
+#define E1000_EXTCNF_CTRL	0x00F00	/* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE	0x00F08	/* Extended Configuration Size */
+#define E1000_PHY_CTRL	0x00F10	/* PHY Control Register in CSR */
+#define E1000_POEMB	E1000_PHY_CTRL	/* PHY OEM Bits */
+#define E1000_PBA	0x01000	/* Packet Buffer Allocation - RW */
+#define E1000_PBS	0x01008	/* Packet Buffer Size */
+#define E1000_PBECCSTS	0x0100C	/* Packet Buffer ECC Status - RW */
+#define E1000_IOSFPC	0x00F28	/* TX corrupted data  */
+#define E1000_EEMNGCTL	0x01010	/* MNG EEprom Control */
+#define E1000_EEWR	0x0102C	/* EEPROM Write Register - RW */
+#define E1000_FLOP	0x0103C	/* FLASH Opcode Register */
+#define E1000_ERT	0x02008	/* Early Rx Threshold - RW */
+#define E1000_FCRTL	0x02160	/* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH	0x02168	/* Flow Control Receive Threshold High - RW */
+#define E1000_PSRCTL	0x02170	/* Packet Split Receive Control - RW */
+#define E1000_RDFH	0x02410	/* Rx Data FIFO Head - RW */
+#define E1000_RDFT	0x02418	/* Rx Data FIFO Tail - RW */
+#define E1000_RDFHS	0x02420	/* Rx Data FIFO Head Saved - RW */
+#define E1000_RDFTS	0x02428	/* Rx Data FIFO Tail Saved - RW */
+#define E1000_RDFPC	0x02430	/* Rx Data FIFO Packet Count - RW */
+/* Split and Replication Rx Control - RW */
+#define E1000_RDTR	0x02820	/* Rx Delay Timer - RW */
+#define E1000_RADV	0x0282C	/* Rx Interrupt Absolute Delay Timer - RW */
+/* Convenience macros
+ *
+ * Note: "_n" is the queue number of the register to be written to.
+ *
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ */
+#define E1000_RDBAL(_n)	((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \
+			 (0x0C000 + ((_n) * 0x40)))
+#define E1000_RDBAH(_n)	((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \
+			 (0x0C004 + ((_n) * 0x40)))
+#define E1000_RDLEN(_n)	((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \
+			 (0x0C008 + ((_n) * 0x40)))
+#define E1000_RDH(_n)	((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \
+			 (0x0C010 + ((_n) * 0x40)))
+#define E1000_RDT(_n)	((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \
+			 (0x0C018 + ((_n) * 0x40)))
+#define E1000_RXDCTL(_n)	((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \
+				 (0x0C028 + ((_n) * 0x40)))
+#define E1000_TDBAL(_n)	((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \
+			 (0x0E000 + ((_n) * 0x40)))
+#define E1000_TDBAH(_n)	((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \
+			 (0x0E004 + ((_n) * 0x40)))
+#define E1000_TDLEN(_n)	((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \
+			 (0x0E008 + ((_n) * 0x40)))
+#define E1000_TDH(_n)	((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \
+			 (0x0E010 + ((_n) * 0x40)))
+#define E1000_TDT(_n)	((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \
+			 (0x0E018 + ((_n) * 0x40)))
+#define E1000_TXDCTL(_n)	((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \
+				 (0x0E028 + ((_n) * 0x40)))
+#define E1000_TARC(_n)		(0x03840 + ((_n) * 0x100))
+#define E1000_KABGTXD		0x03004	/* AFE Band Gap Transmit Ref Data */
+#define E1000_RAL(_i)		(((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+				 (0x054E0 + ((_i - 16) * 8)))
+#define E1000_RAH(_i)		(((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+				 (0x054E4 + ((_i - 16) * 8)))
+#define E1000_SHRAL(_i)		(0x05438 + ((_i) * 8))
+#define E1000_SHRAH(_i)		(0x0543C + ((_i) * 8))
+#define E1000_TARC0_CB_MULTIQ_3_REQ	(1 << 28 | 1 << 29)
+#define E1000_TDFH		0x03410	/* Tx Data FIFO Head - RW */
+#define E1000_TDFT		0x03418	/* Tx Data FIFO Tail - RW */
+#define E1000_TDFHS		0x03420	/* Tx Data FIFO Head Saved - RW */
+#define E1000_TDFTS		0x03428	/* Tx Data FIFO Tail Saved - RW */
+#define E1000_TDFPC		0x03430	/* Tx Data FIFO Packet Count - RW */
+#define E1000_TIDV	0x03820	/* Tx Interrupt Delay Value - RW */
+#define E1000_TADV	0x0382C	/* Tx Interrupt Absolute Delay Val - RW */
+#define E1000_CRCERRS	0x04000	/* CRC Error Count - R/clr */
+#define E1000_ALGNERRC	0x04004	/* Alignment Error Count - R/clr */
+#define E1000_SYMERRS	0x04008	/* Symbol Error Count - R/clr */
+#define E1000_RXERRC	0x0400C	/* Receive Error Count - R/clr */
+#define E1000_MPC	0x04010	/* Missed Packet Count - R/clr */
+#define E1000_SCC	0x04014	/* Single Collision Count - R/clr */
+#define E1000_ECOL	0x04018	/* Excessive Collision Count - R/clr */
+#define E1000_MCC	0x0401C	/* Multiple Collision Count - R/clr */
+#define E1000_LATECOL	0x04020	/* Late Collision Count - R/clr */
+#define E1000_COLC	0x04028	/* Collision Count - R/clr */
+#define E1000_DC	0x04030	/* Defer Count - R/clr */
+#define E1000_TNCRS	0x04034	/* Tx-No CRS - R/clr */
+#define E1000_SEC	0x04038	/* Sequence Error Count - R/clr */
+#define E1000_CEXTERR	0x0403C	/* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC	0x04040	/* Receive Length Error Count - R/clr */
+#define E1000_XONRXC	0x04048	/* XON Rx Count - R/clr */
+#define E1000_XONTXC	0x0404C	/* XON Tx Count - R/clr */
+#define E1000_XOFFRXC	0x04050	/* XOFF Rx Count - R/clr */
+#define E1000_XOFFTXC	0x04054	/* XOFF Tx Count - R/clr */
+#define E1000_FCRUC	0x04058	/* Flow Control Rx Unsupported Count- R/clr */
+#define E1000_PRC64	0x0405C	/* Packets Rx (64 bytes) - R/clr */
+#define E1000_PRC127	0x04060	/* Packets Rx (65-127 bytes) - R/clr */
+#define E1000_PRC255	0x04064	/* Packets Rx (128-255 bytes) - R/clr */
+#define E1000_PRC511	0x04068	/* Packets Rx (255-511 bytes) - R/clr */
+#define E1000_PRC1023	0x0406C	/* Packets Rx (512-1023 bytes) - R/clr */
+#define E1000_PRC1522	0x04070	/* Packets Rx (1024-1522 bytes) - R/clr */
+#define E1000_GPRC	0x04074	/* Good Packets Rx Count - R/clr */
+#define E1000_BPRC	0x04078	/* Broadcast Packets Rx Count - R/clr */
+#define E1000_MPRC	0x0407C	/* Multicast Packets Rx Count - R/clr */
+#define E1000_GPTC	0x04080	/* Good Packets Tx Count - R/clr */
+#define E1000_GORCL	0x04088	/* Good Octets Rx Count Low - R/clr */
+#define E1000_GORCH	0x0408C	/* Good Octets Rx Count High - R/clr */
+#define E1000_GOTCL	0x04090	/* Good Octets Tx Count Low - R/clr */
+#define E1000_GOTCH	0x04094	/* Good Octets Tx Count High - R/clr */
+#define E1000_RNBC	0x040A0	/* Rx No Buffers Count - R/clr */
+#define E1000_RUC	0x040A4	/* Rx Undersize Count - R/clr */
+#define E1000_RFC	0x040A8	/* Rx Fragment Count - R/clr */
+#define E1000_ROC	0x040AC	/* Rx Oversize Count - R/clr */
+#define E1000_RJC	0x040B0	/* Rx Jabber Count - R/clr */
+#define E1000_MGTPRC	0x040B4	/* Management Packets Rx Count - R/clr */
+#define E1000_MGTPDC	0x040B8	/* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC	0x040BC	/* Management Packets Tx Count - R/clr */
+#define E1000_TORL	0x040C0	/* Total Octets Rx Low - R/clr */
+#define E1000_TORH	0x040C4	/* Total Octets Rx High - R/clr */
+#define E1000_TOTL	0x040C8	/* Total Octets Tx Low - R/clr */
+#define E1000_TOTH	0x040CC	/* Total Octets Tx High - R/clr */
+#define E1000_TPR	0x040D0	/* Total Packets Rx - R/clr */
+#define E1000_TPT	0x040D4	/* Total Packets Tx - R/clr */
+#define E1000_PTC64	0x040D8	/* Packets Tx (64 bytes) - R/clr */
+#define E1000_PTC127	0x040DC	/* Packets Tx (65-127 bytes) - R/clr */
+#define E1000_PTC255	0x040E0	/* Packets Tx (128-255 bytes) - R/clr */
+#define E1000_PTC511	0x040E4	/* Packets Tx (256-511 bytes) - R/clr */
+#define E1000_PTC1023	0x040E8	/* Packets Tx (512-1023 bytes) - R/clr */
+#define E1000_PTC1522	0x040EC	/* Packets Tx (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC	0x040F0	/* Multicast Packets Tx Count - R/clr */
+#define E1000_BPTC	0x040F4	/* Broadcast Packets Tx Count - R/clr */
+#define E1000_TSCTC	0x040F8	/* TCP Segmentation Context Tx - R/clr */
+#define E1000_TSCTFC	0x040FC	/* TCP Segmentation Context Tx Fail - R/clr */
+#define E1000_IAC	0x04100	/* Interrupt Assertion Count */
+#define E1000_ICRXPTC	0x04104	/* Interrupt Cause Rx Pkt Timer Expire Count */
+#define E1000_ICRXATC	0x04108	/* Interrupt Cause Rx Abs Timer Expire Count */
+#define E1000_ICTXPTC	0x0410C	/* Interrupt Cause Tx Pkt Timer Expire Count */
+#define E1000_ICTXATC	0x04110	/* Interrupt Cause Tx Abs Timer Expire Count */
+#define E1000_ICTXQEC	0x04118	/* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC	0x0411C	/* Interrupt Cause Tx Queue Min Thresh Count */
+#define E1000_ICRXDMTC	0x04120	/* Interrupt Cause Rx Desc Min Thresh Count */
+#define E1000_ICRXOC	0x04124	/* Interrupt Cause Receiver Overrun Count */
+#define E1000_CRC_OFFSET	0x05F50	/* CRC Offset register */
+
+#define E1000_PCS_LCTL	0x04208	/* PCS Link Control - RW */
+#define E1000_PCS_LSTAT	0x0420C	/* PCS Link Status - RO */
+#define E1000_PCS_ANADV	0x04218	/* AN advertisement - RW */
+#define E1000_PCS_LPAB	0x0421C	/* Link Partner Ability - RW */
+#define E1000_RXCSUM	0x05000	/* Rx Checksum Control - RW */
+#define E1000_RFCTL	0x05008	/* Receive Filter Control */
+#define E1000_MTA	0x05200	/* Multicast Table Array - RW Array */
+#define E1000_RA	0x05400	/* Receive Address - RW Array */
+#define E1000_VFTA	0x05600	/* VLAN Filter Table Array - RW Array */
+#define E1000_WUC	0x05800	/* Wakeup Control - RW */
+#define E1000_WUFC	0x05808	/* Wakeup Filter Control - RW */
+#define E1000_WUS	0x05810	/* Wakeup Status - RO */
+#define E1000_MANC	0x05820	/* Management Control - RW */
+#define E1000_FFLT	0x05F00	/* Flexible Filter Length Table - RW Array */
+#define E1000_HOST_IF	0x08800	/* Host Interface */
+
+#define E1000_KMRNCTRLSTA	0x00034	/* MAC-PHY interface - RW */
+#define E1000_MANC2H		0x05860	/* Management Control To Host - RW */
+/* Management Decision Filters */
+#define E1000_MDEF(_n)		(0x05890 + (4 * (_n)))
+#define E1000_SW_FW_SYNC	0x05B5C	/* SW-FW Synchronization - RW */
+#define E1000_GCR	0x05B00	/* PCI-Ex Control */
+#define E1000_GCR2	0x05B64	/* PCI-Ex Control #2 */
+#define E1000_FACTPS	0x05B30	/* Function Active and Power State to MNG */
+#define E1000_SWSM	0x05B50	/* SW Semaphore */
+#define E1000_FWSM	0x05B54	/* FW Semaphore */
+/* Driver-only SW semaphore (not used by BOOT agents) */
+#define E1000_SWSM2	0x05B58
+#define E1000_FFLT_DBG	0x05F04	/* Debug Register */
+#define E1000_HICR	0x08F00	/* Host Interface Control */
+
+/* RSS registers */
+#define E1000_MRQC	0x05818	/* Multiple Receive Control - RW */
+#define E1000_RETA(_i)	(0x05C00 + ((_i) * 4))	/* Redirection Table - RW */
+#define E1000_RSSRK(_i)	(0x05C80 + ((_i) * 4))	/* RSS Random Key - RW */
+#define E1000_TSYNCRXCTL	0x0B620	/* Rx Time Sync Control register - RW */
+#define E1000_TSYNCTXCTL	0x0B614	/* Tx Time Sync Control register - RW */
+#define E1000_RXSTMPL	0x0B624	/* Rx timestamp Low - RO */
+#define E1000_RXSTMPH	0x0B628	/* Rx timestamp High - RO */
+#define E1000_TXSTMPL	0x0B618	/* Tx timestamp value Low - RO */
+#define E1000_TXSTMPH	0x0B61C	/* Tx timestamp value High - RO */
+#define E1000_SYSTIML	0x0B600	/* System time register Low - RO */
+#define E1000_SYSTIMH	0x0B604	/* System time register High - RO */
+#define E1000_TIMINCA	0x0B608	/* Increment attributes register - RW */
+#define E1000_RXMTRL	0x0B634	/* Time sync Rx EtherType and Msg Type - RW */
+#define E1000_RXUDP	0x0B638	/* Time Sync Rx UDP Port - RW */
+
+#endif