Initial import

31 files changed, 37342 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile
new file mode 100644
index 000000000..35e6fa643
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/Makefile
@@ -0,0 +1,44 @@
+################################################################################
+#
+# Intel 10 Gigabit PCI Express Linux driver
+# Copyright(c) 1999 - 2013 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# Linux NICS <linux.nics@intel.com>
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) 10GbE PCI Express ethernet driver
+#
+
+obj-$(CONFIG_IXGBE) += ixgbe.o
+
+ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
+              ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \
+              ixgbe_mbx.o ixgbe_x540.o ixgbe_x550.o ixgbe_lib.o ixgbe_ptp.o
+
+ixgbe-$(CONFIG_IXGBE_DCB) +=  ixgbe_dcb.o ixgbe_dcb_82598.o \
+                              ixgbe_dcb_82599.o ixgbe_dcb_nl.o
+
+ixgbe-$(CONFIG_IXGBE_HWMON) += ixgbe_sysfs.o
+ixgbe-$(CONFIG_DEBUG_FS) += ixgbe_debugfs.o
+ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
new file mode 100644
index 000000000..636f9e350
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -0,0 +1,969 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_H_
+#define _IXGBE_H_
+
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/cpumask.h>
+#include <linux/aer.h>
+#include <linux/if_vlan.h>
+#include <linux/jiffies.h>
+
+#include <linux/timecounter.h>
+#include <linux/net_tstamp.h>
+#include <linux/ptp_clock_kernel.h>
+
+#include "ixgbe_type.h"
+#include "ixgbe_common.h"
+#include "ixgbe_dcb.h"
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+#define IXGBE_FCOE
+#include "ixgbe_fcoe.h"
+#endif /* CONFIG_FCOE or CONFIG_FCOE_MODULE */
+#ifdef CONFIG_IXGBE_DCA
+#include <linux/dca.h>
+#endif
+
+#include <net/busy_poll.h>
+
+#ifdef CONFIG_NET_RX_BUSY_POLL
+#define BP_EXTENDED_STATS
+#endif
+/* common prefix used by pr_<> macros */
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+/* TX/RX descriptor defines */
+#define IXGBE_DEFAULT_TXD		    512
+#define IXGBE_DEFAULT_TX_WORK		    256
+#define IXGBE_MAX_TXD			   4096
+#define IXGBE_MIN_TXD			     64
+
+#if (PAGE_SIZE < 8192)
+#define IXGBE_DEFAULT_RXD		    512
+#else
+#define IXGBE_DEFAULT_RXD		    128
+#endif
+#define IXGBE_MAX_RXD			   4096
+#define IXGBE_MIN_RXD			     64
+
+#define IXGBE_ETH_P_LLDP		 0x88CC
+
+/* flow control */
+#define IXGBE_MIN_FCRTL			   0x40
+#define IXGBE_MAX_FCRTL			0x7FF80
+#define IXGBE_MIN_FCRTH			  0x600
+#define IXGBE_MAX_FCRTH			0x7FFF0
+#define IXGBE_DEFAULT_FCPAUSE		 0xFFFF
+#define IXGBE_MIN_FCPAUSE		      0
+#define IXGBE_MAX_FCPAUSE		 0xFFFF
+
+/* Supported Rx Buffer Sizes */
+#define IXGBE_RXBUFFER_256    256  /* Used for skb receive header */
+#define IXGBE_RXBUFFER_2K    2048
+#define IXGBE_RXBUFFER_3K    3072
+#define IXGBE_RXBUFFER_4K    4096
+#define IXGBE_MAX_RXBUFFER  16384  /* largest size for a single descriptor */
+
+/*
+ * NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN means we
+ * reserve 64 more, and skb_shared_info adds an additional 320 bytes more,
+ * this adds up to 448 bytes of extra data.
+ *
+ * Since netdev_alloc_skb now allocates a page fragment we can use a value
+ * of 256 and the resultant skb will have a truesize of 960 or less.
+ */
+#define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_256
+
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IXGBE_RX_BUFFER_WRITE	16	/* Must be power of 2 */
+
+enum ixgbe_tx_flags {
+	/* cmd_type flags */
+	IXGBE_TX_FLAGS_HW_VLAN	= 0x01,
+	IXGBE_TX_FLAGS_TSO	= 0x02,
+	IXGBE_TX_FLAGS_TSTAMP	= 0x04,
+
+	/* olinfo flags */
+	IXGBE_TX_FLAGS_CC	= 0x08,
+	IXGBE_TX_FLAGS_IPV4	= 0x10,
+	IXGBE_TX_FLAGS_CSUM	= 0x20,
+
+	/* software defined flags */
+	IXGBE_TX_FLAGS_SW_VLAN	= 0x40,
+	IXGBE_TX_FLAGS_FCOE	= 0x80,
+};
+
+/* VLAN info */
+#define IXGBE_TX_FLAGS_VLAN_MASK	0xffff0000
+#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK	0xe0000000
+#define IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT  29
+#define IXGBE_TX_FLAGS_VLAN_SHIFT	16
+
+#define IXGBE_MAX_VF_MC_ENTRIES         30
+#define IXGBE_MAX_VF_FUNCTIONS          64
+#define IXGBE_MAX_VFTA_ENTRIES          128
+#define MAX_EMULATION_MAC_ADDRS         16
+#define IXGBE_MAX_PF_MACVLANS           15
+#define VMDQ_P(p)   ((p) + adapter->ring_feature[RING_F_VMDQ].offset)
+#define IXGBE_82599_VF_DEVICE_ID        0x10ED
+#define IXGBE_X540_VF_DEVICE_ID         0x1515
+
+struct vf_data_storage {
+	unsigned char vf_mac_addresses[ETH_ALEN];
+	u16 vf_mc_hashes[IXGBE_MAX_VF_MC_ENTRIES];
+	u16 num_vf_mc_hashes;
+	u16 default_vf_vlan_id;
+	u16 vlans_enabled;
+	bool clear_to_send;
+	bool pf_set_mac;
+	u16 pf_vlan; /* When set, guest VLAN config not allowed. */
+	u16 pf_qos;
+	u16 tx_rate;
+	u16 vlan_count;
+	u8 spoofchk_enabled;
+	bool rss_query_enabled;
+	unsigned int vf_api;
+};
+
+struct vf_macvlans {
+	struct list_head l;
+	int vf;
+	bool free;
+	bool is_macvlan;
+	u8 vf_macvlan[ETH_ALEN];
+};
+
+#define IXGBE_MAX_TXD_PWR	14
+#define IXGBE_MAX_DATA_PER_TXD	(1 << IXGBE_MAX_TXD_PWR)
+
+/* Tx Descriptors needed, worst case */
+#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IXGBE_MAX_DATA_PER_TXD)
+#define DESC_NEEDED (MAX_SKB_FRAGS + 4)
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct ixgbe_tx_buffer {
+	union ixgbe_adv_tx_desc *next_to_watch;
+	unsigned long time_stamp;
+	struct sk_buff *skb;
+	unsigned int bytecount;
+	unsigned short gso_segs;
+	__be16 protocol;
+	DEFINE_DMA_UNMAP_ADDR(dma);
+	DEFINE_DMA_UNMAP_LEN(len);
+	u32 tx_flags;
+};
+
+struct ixgbe_rx_buffer {
+	struct sk_buff *skb;
+	dma_addr_t dma;
+	struct page *page;
+	unsigned int page_offset;
+};
+
+struct ixgbe_queue_stats {
+	u64 packets;
+	u64 bytes;
+#ifdef BP_EXTENDED_STATS
+	u64 yields;
+	u64 misses;
+	u64 cleaned;
+#endif  /* BP_EXTENDED_STATS */
+};
+
+struct ixgbe_tx_queue_stats {
+	u64 restart_queue;
+	u64 tx_busy;
+	u64 tx_done_old;
+};
+
+struct ixgbe_rx_queue_stats {
+	u64 rsc_count;
+	u64 rsc_flush;
+	u64 non_eop_descs;
+	u64 alloc_rx_page_failed;
+	u64 alloc_rx_buff_failed;
+	u64 csum_err;
+};
+
+enum ixgbe_ring_state_t {
+	__IXGBE_TX_FDIR_INIT_DONE,
+	__IXGBE_TX_XPS_INIT_DONE,
+	__IXGBE_TX_DETECT_HANG,
+	__IXGBE_HANG_CHECK_ARMED,
+	__IXGBE_RX_RSC_ENABLED,
+	__IXGBE_RX_CSUM_UDP_ZERO_ERR,
+	__IXGBE_RX_FCOE,
+};
+
+struct ixgbe_fwd_adapter {
+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+	struct net_device *netdev;
+	struct ixgbe_adapter *real_adapter;
+	unsigned int tx_base_queue;
+	unsigned int rx_base_queue;
+	int pool;
+};
+
+#define check_for_tx_hang(ring) \
+	test_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
+#define set_check_for_tx_hang(ring) \
+	set_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
+#define clear_check_for_tx_hang(ring) \
+	clear_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
+#define ring_is_rsc_enabled(ring) \
+	test_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
+#define set_ring_rsc_enabled(ring) \
+	set_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
+#define clear_ring_rsc_enabled(ring) \
+	clear_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
+struct ixgbe_ring {
+	struct ixgbe_ring *next;	/* pointer to next ring in q_vector */
+	struct ixgbe_q_vector *q_vector; /* backpointer to host q_vector */
+	struct net_device *netdev;	/* netdev ring belongs to */
+	struct device *dev;		/* device for DMA mapping */
+	struct ixgbe_fwd_adapter *l2_accel_priv;
+	void *desc;			/* descriptor ring memory */
+	union {
+		struct ixgbe_tx_buffer *tx_buffer_info;
+		struct ixgbe_rx_buffer *rx_buffer_info;
+	};
+	unsigned long state;
+	u8 __iomem *tail;
+	dma_addr_t dma;			/* phys. address of descriptor ring */
+	unsigned int size;		/* length in bytes */
+
+	u16 count;			/* amount of descriptors */
+
+	u8 queue_index; /* needed for multiqueue queue management */
+	u8 reg_idx;			/* holds the special value that gets
+					 * the hardware register offset
+					 * associated with this ring, which is
+					 * different for DCB and RSS modes
+					 */
+	u16 next_to_use;
+	u16 next_to_clean;
+
+	union {
+		u16 next_to_alloc;
+		struct {
+			u8 atr_sample_rate;
+			u8 atr_count;
+		};
+	};
+
+	u8 dcb_tc;
+	struct ixgbe_queue_stats stats;
+	struct u64_stats_sync syncp;
+	union {
+		struct ixgbe_tx_queue_stats tx_stats;
+		struct ixgbe_rx_queue_stats rx_stats;
+	};
+} ____cacheline_internodealigned_in_smp;
+
+enum ixgbe_ring_f_enum {
+	RING_F_NONE = 0,
+	RING_F_VMDQ,  /* SR-IOV uses the same ring feature */
+	RING_F_RSS,
+	RING_F_FDIR,
+#ifdef IXGBE_FCOE
+	RING_F_FCOE,
+#endif /* IXGBE_FCOE */
+
+	RING_F_ARRAY_SIZE      /* must be last in enum set */
+};
+
+#define IXGBE_MAX_RSS_INDICES		16
+#define IXGBE_MAX_RSS_INDICES_X550	64
+#define IXGBE_MAX_VMDQ_INDICES		64
+#define IXGBE_MAX_FDIR_INDICES		63	/* based on q_vector limit */
+#define IXGBE_MAX_FCOE_INDICES		8
+#define MAX_RX_QUEUES			(IXGBE_MAX_FDIR_INDICES + 1)
+#define MAX_TX_QUEUES			(IXGBE_MAX_FDIR_INDICES + 1)
+#define IXGBE_MAX_L2A_QUEUES		4
+#define IXGBE_BAD_L2A_QUEUE		3
+#define IXGBE_MAX_MACVLANS		31
+#define IXGBE_MAX_DCBMACVLANS		8
+
+struct ixgbe_ring_feature {
+	u16 limit;	/* upper limit on feature indices */
+	u16 indices;	/* current value of indices */
+	u16 mask;	/* Mask used for feature to ring mapping */
+	u16 offset;	/* offset to start of feature */
+} ____cacheline_internodealigned_in_smp;
+
+#define IXGBE_82599_VMDQ_8Q_MASK 0x78
+#define IXGBE_82599_VMDQ_4Q_MASK 0x7C
+#define IXGBE_82599_VMDQ_2Q_MASK 0x7E
+
+/*
+ * FCoE requires that all Rx buffers be over 2200 bytes in length.  Since
+ * this is twice the size of a half page we need to double the page order
+ * for FCoE enabled Rx queues.
+ */
+static inline unsigned int ixgbe_rx_bufsz(struct ixgbe_ring *ring)
+{
+#ifdef IXGBE_FCOE
+	if (test_bit(__IXGBE_RX_FCOE, &ring->state))
+		return (PAGE_SIZE < 8192) ? IXGBE_RXBUFFER_4K :
+					    IXGBE_RXBUFFER_3K;
+#endif
+	return IXGBE_RXBUFFER_2K;
+}
+
+static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring)
+{
+#ifdef IXGBE_FCOE
+	if (test_bit(__IXGBE_RX_FCOE, &ring->state))
+		return (PAGE_SIZE < 8192) ? 1 : 0;
+#endif
+	return 0;
+}
+#define ixgbe_rx_pg_size(_ring) (PAGE_SIZE << ixgbe_rx_pg_order(_ring))
+
+struct ixgbe_ring_container {
+	struct ixgbe_ring *ring;	/* pointer to linked list of rings */
+	unsigned int total_bytes;	/* total bytes processed this int */
+	unsigned int total_packets;	/* total packets processed this int */
+	u16 work_limit;			/* total work allowed per interrupt */
+	u8 count;			/* total number of rings in vector */
+	u8 itr;				/* current ITR setting for ring */
+};
+
+/* iterator for handling rings in ring container */
+#define ixgbe_for_each_ring(pos, head) \
+	for (pos = (head).ring; pos != NULL; pos = pos->next)
+
+#define MAX_RX_PACKET_BUFFERS ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) \
+			      ? 8 : 1)
+#define MAX_TX_PACKET_BUFFERS MAX_RX_PACKET_BUFFERS
+
+/* MAX_Q_VECTORS of these are allocated,
+ * but we only use one per queue-specific vector.
+ */
+struct ixgbe_q_vector {
+	struct ixgbe_adapter *adapter;
+#ifdef CONFIG_IXGBE_DCA
+	int cpu;	    /* CPU for DCA */
+#endif
+	u16 v_idx;		/* index of q_vector within array, also used for
+				 * finding the bit in EICR and friends that
+				 * represents the vector for this ring */
+	u16 itr;		/* Interrupt throttle rate written to EITR */
+	struct ixgbe_ring_container rx, tx;
+
+	struct napi_struct napi;
+	cpumask_t affinity_mask;
+	int numa_node;
+	struct rcu_head rcu;	/* to avoid race with update stats on free */
+	char name[IFNAMSIZ + 9];
+
+#ifdef CONFIG_NET_RX_BUSY_POLL
+	atomic_t state;
+#endif  /* CONFIG_NET_RX_BUSY_POLL */
+
+	/* for dynamic allocation of rings associated with this q_vector */
+	struct ixgbe_ring ring[0] ____cacheline_internodealigned_in_smp;
+};
+
+#ifdef CONFIG_NET_RX_BUSY_POLL
+enum ixgbe_qv_state_t {
+	IXGBE_QV_STATE_IDLE = 0,
+	IXGBE_QV_STATE_NAPI,
+	IXGBE_QV_STATE_POLL,
+	IXGBE_QV_STATE_DISABLE
+};
+
+static inline void ixgbe_qv_init_lock(struct ixgbe_q_vector *q_vector)
+{
+	/* reset state to idle */
+	atomic_set(&q_vector->state, IXGBE_QV_STATE_IDLE);
+}
+
+/* called from the device poll routine to get ownership of a q_vector */
+static inline bool ixgbe_qv_lock_napi(struct ixgbe_q_vector *q_vector)
+{
+	int rc = atomic_cmpxchg(&q_vector->state, IXGBE_QV_STATE_IDLE,
+				IXGBE_QV_STATE_NAPI);
+#ifdef BP_EXTENDED_STATS
+	if (rc != IXGBE_QV_STATE_IDLE)
+		q_vector->tx.ring->stats.yields++;
+#endif
+
+	return rc == IXGBE_QV_STATE_IDLE;
+}
+
+/* returns true is someone tried to get the qv while napi had it */
+static inline void ixgbe_qv_unlock_napi(struct ixgbe_q_vector *q_vector)
+{
+	WARN_ON(atomic_read(&q_vector->state) != IXGBE_QV_STATE_NAPI);
+
+	/* flush any outstanding Rx frames */
+	if (q_vector->napi.gro_list)
+		napi_gro_flush(&q_vector->napi, false);
+
+	/* reset state to idle */
+	atomic_set(&q_vector->state, IXGBE_QV_STATE_IDLE);
+}
+
+/* called from ixgbe_low_latency_poll() */
+static inline bool ixgbe_qv_lock_poll(struct ixgbe_q_vector *q_vector)
+{
+	int rc = atomic_cmpxchg(&q_vector->state, IXGBE_QV_STATE_IDLE,
+				IXGBE_QV_STATE_POLL);
+#ifdef BP_EXTENDED_STATS
+	if (rc != IXGBE_QV_STATE_IDLE)
+		q_vector->tx.ring->stats.yields++;
+#endif
+	return rc == IXGBE_QV_STATE_IDLE;
+}
+
+/* returns true if someone tried to get the qv while it was locked */
+static inline void ixgbe_qv_unlock_poll(struct ixgbe_q_vector *q_vector)
+{
+	WARN_ON(atomic_read(&q_vector->state) != IXGBE_QV_STATE_POLL);
+
+	/* reset state to idle */
+	atomic_set(&q_vector->state, IXGBE_QV_STATE_IDLE);
+}
+
+/* true if a socket is polling, even if it did not get the lock */
+static inline bool ixgbe_qv_busy_polling(struct ixgbe_q_vector *q_vector)
+{
+	return atomic_read(&q_vector->state) == IXGBE_QV_STATE_POLL;
+}
+
+/* false if QV is currently owned */
+static inline bool ixgbe_qv_disable(struct ixgbe_q_vector *q_vector)
+{
+	int rc = atomic_cmpxchg(&q_vector->state, IXGBE_QV_STATE_IDLE,
+				IXGBE_QV_STATE_DISABLE);
+
+	return rc == IXGBE_QV_STATE_IDLE;
+}
+
+#else /* CONFIG_NET_RX_BUSY_POLL */
+static inline void ixgbe_qv_init_lock(struct ixgbe_q_vector *q_vector)
+{
+}
+
+static inline bool ixgbe_qv_lock_napi(struct ixgbe_q_vector *q_vector)
+{
+	return true;
+}
+
+static inline bool ixgbe_qv_unlock_napi(struct ixgbe_q_vector *q_vector)
+{
+	return false;
+}
+
+static inline bool ixgbe_qv_lock_poll(struct ixgbe_q_vector *q_vector)
+{
+	return false;
+}
+
+static inline bool ixgbe_qv_unlock_poll(struct ixgbe_q_vector *q_vector)
+{
+	return false;
+}
+
+static inline bool ixgbe_qv_busy_polling(struct ixgbe_q_vector *q_vector)
+{
+	return false;
+}
+
+static inline bool ixgbe_qv_disable(struct ixgbe_q_vector *q_vector)
+{
+	return true;
+}
+
+#endif /* CONFIG_NET_RX_BUSY_POLL */
+
+#ifdef CONFIG_IXGBE_HWMON
+
+#define IXGBE_HWMON_TYPE_LOC		0
+#define IXGBE_HWMON_TYPE_TEMP		1
+#define IXGBE_HWMON_TYPE_CAUTION	2
+#define IXGBE_HWMON_TYPE_MAX		3
+
+struct hwmon_attr {
+	struct device_attribute dev_attr;
+	struct ixgbe_hw *hw;
+	struct ixgbe_thermal_diode_data *sensor;
+	char name[12];
+};
+
+struct hwmon_buff {
+	struct attribute_group group;
+	const struct attribute_group *groups[2];
+	struct attribute *attrs[IXGBE_MAX_SENSORS * 4 + 1];
+	struct hwmon_attr hwmon_list[IXGBE_MAX_SENSORS * 4];
+	unsigned int n_hwmon;
+};
+#endif /* CONFIG_IXGBE_HWMON */
+
+/*
+ * microsecond values for various ITR rates shifted by 2 to fit itr register
+ * with the first 3 bits reserved 0
+ */
+#define IXGBE_MIN_RSC_ITR	24
+#define IXGBE_100K_ITR		40
+#define IXGBE_20K_ITR		200
+#define IXGBE_10K_ITR		400
+#define IXGBE_8K_ITR		500
+
+/* ixgbe_test_staterr - tests bits in Rx descriptor status and error fields */
+static inline __le32 ixgbe_test_staterr(union ixgbe_adv_rx_desc *rx_desc,
+					const u32 stat_err_bits)
+{
+	return rx_desc->wb.upper.status_error & cpu_to_le32(stat_err_bits);
+}
+
+static inline u16 ixgbe_desc_unused(struct ixgbe_ring *ring)
+{
+	u16 ntc = ring->next_to_clean;
+	u16 ntu = ring->next_to_use;
+
+	return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1;
+}
+
+#define IXGBE_RX_DESC(R, i)	    \
+	(&(((union ixgbe_adv_rx_desc *)((R)->desc))[i]))
+#define IXGBE_TX_DESC(R, i)	    \
+	(&(((union ixgbe_adv_tx_desc *)((R)->desc))[i]))
+#define IXGBE_TX_CTXTDESC(R, i)	    \
+	(&(((struct ixgbe_adv_tx_context_desc *)((R)->desc))[i]))
+
+#define IXGBE_MAX_JUMBO_FRAME_SIZE	9728 /* Maximum Supported Size 9.5KB */
+#ifdef IXGBE_FCOE
+/* Use 3K as the baby jumbo frame size for FCoE */
+#define IXGBE_FCOE_JUMBO_FRAME_SIZE       3072
+#endif /* IXGBE_FCOE */
+
+#define OTHER_VECTOR 1
+#define NON_Q_VECTORS (OTHER_VECTOR)
+
+#define MAX_MSIX_VECTORS_82599 64
+#define MAX_Q_VECTORS_82599 64
+#define MAX_MSIX_VECTORS_82598 18
+#define MAX_Q_VECTORS_82598 16
+
+struct ixgbe_mac_addr {
+	u8 addr[ETH_ALEN];
+	u16 queue;
+	u16 state; /* bitmask */
+};
+#define IXGBE_MAC_STATE_DEFAULT		0x1
+#define IXGBE_MAC_STATE_MODIFIED	0x2
+#define IXGBE_MAC_STATE_IN_USE		0x4
+
+#define MAX_Q_VECTORS MAX_Q_VECTORS_82599
+#define MAX_MSIX_COUNT MAX_MSIX_VECTORS_82599
+
+#define MIN_MSIX_Q_VECTORS 1
+#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS)
+
+/* default to trying for four seconds */
+#define IXGBE_TRY_LINK_TIMEOUT (4 * HZ)
+
+/* board specific private data structure */
+struct ixgbe_adapter {
+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+	/* OS defined structs */
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+
+	unsigned long state;
+
+	/* Some features need tri-state capability,
+	 * thus the additional *_CAPABLE flags.
+	 */
+	u32 flags;
+#define IXGBE_FLAG_MSI_ENABLED                  (u32)(1 << 1)
+#define IXGBE_FLAG_MSIX_ENABLED                 (u32)(1 << 3)
+#define IXGBE_FLAG_RX_1BUF_CAPABLE              (u32)(1 << 4)
+#define IXGBE_FLAG_RX_PS_CAPABLE                (u32)(1 << 5)
+#define IXGBE_FLAG_RX_PS_ENABLED                (u32)(1 << 6)
+#define IXGBE_FLAG_DCA_ENABLED                  (u32)(1 << 8)
+#define IXGBE_FLAG_DCA_CAPABLE                  (u32)(1 << 9)
+#define IXGBE_FLAG_IMIR_ENABLED                 (u32)(1 << 10)
+#define IXGBE_FLAG_MQ_CAPABLE                   (u32)(1 << 11)
+#define IXGBE_FLAG_DCB_ENABLED                  (u32)(1 << 12)
+#define IXGBE_FLAG_VMDQ_CAPABLE                 (u32)(1 << 13)
+#define IXGBE_FLAG_VMDQ_ENABLED                 (u32)(1 << 14)
+#define IXGBE_FLAG_FAN_FAIL_CAPABLE             (u32)(1 << 15)
+#define IXGBE_FLAG_NEED_LINK_UPDATE             (u32)(1 << 16)
+#define IXGBE_FLAG_NEED_LINK_CONFIG             (u32)(1 << 17)
+#define IXGBE_FLAG_FDIR_HASH_CAPABLE            (u32)(1 << 18)
+#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 19)
+#define IXGBE_FLAG_FCOE_CAPABLE                 (u32)(1 << 20)
+#define IXGBE_FLAG_FCOE_ENABLED                 (u32)(1 << 21)
+#define IXGBE_FLAG_SRIOV_CAPABLE                (u32)(1 << 22)
+#define IXGBE_FLAG_SRIOV_ENABLED                (u32)(1 << 23)
+
+	u32 flags2;
+#define IXGBE_FLAG2_RSC_CAPABLE                 (u32)(1 << 0)
+#define IXGBE_FLAG2_RSC_ENABLED                 (u32)(1 << 1)
+#define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE         (u32)(1 << 2)
+#define IXGBE_FLAG2_TEMP_SENSOR_EVENT           (u32)(1 << 3)
+#define IXGBE_FLAG2_SEARCH_FOR_SFP              (u32)(1 << 4)
+#define IXGBE_FLAG2_SFP_NEEDS_RESET             (u32)(1 << 5)
+#define IXGBE_FLAG2_RESET_REQUESTED             (u32)(1 << 6)
+#define IXGBE_FLAG2_FDIR_REQUIRES_REINIT        (u32)(1 << 7)
+#define IXGBE_FLAG2_RSS_FIELD_IPV4_UDP		(u32)(1 << 8)
+#define IXGBE_FLAG2_RSS_FIELD_IPV6_UDP		(u32)(1 << 9)
+#define IXGBE_FLAG2_PTP_PPS_ENABLED		(u32)(1 << 10)
+
+	/* Tx fast path data */
+	int num_tx_queues;
+	u16 tx_itr_setting;
+	u16 tx_work_limit;
+
+	/* Rx fast path data */
+	int num_rx_queues;
+	u16 rx_itr_setting;
+
+	/* TX */
+	struct ixgbe_ring *tx_ring[MAX_TX_QUEUES] ____cacheline_aligned_in_smp;
+
+	u64 restart_queue;
+	u64 lsc_int;
+	u32 tx_timeout_count;
+
+	/* RX */
+	struct ixgbe_ring *rx_ring[MAX_RX_QUEUES];
+	int num_rx_pools;		/* == num_rx_queues in 82598 */
+	int num_rx_queues_per_pool;	/* 1 if 82598, can be many if 82599 */
+	u64 hw_csum_rx_error;
+	u64 hw_rx_no_dma_resources;
+	u64 rsc_total_count;
+	u64 rsc_total_flush;
+	u64 non_eop_descs;
+	u32 alloc_rx_page_failed;
+	u32 alloc_rx_buff_failed;
+
+	struct ixgbe_q_vector *q_vector[MAX_Q_VECTORS];
+
+	/* DCB parameters */
+	struct ieee_pfc *ixgbe_ieee_pfc;
+	struct ieee_ets *ixgbe_ieee_ets;
+	struct ixgbe_dcb_config dcb_cfg;
+	struct ixgbe_dcb_config temp_dcb_cfg;
+	u8 dcb_set_bitmap;
+	u8 dcbx_cap;
+	enum ixgbe_fc_mode last_lfc_mode;
+
+	int num_q_vectors;	/* current number of q_vectors for device */
+	int max_q_vectors;	/* true count of q_vectors for device */
+	struct ixgbe_ring_feature ring_feature[RING_F_ARRAY_SIZE];
+	struct msix_entry *msix_entries;
+
+	u32 test_icr;
+	struct ixgbe_ring test_tx_ring;
+	struct ixgbe_ring test_rx_ring;
+
+	/* structs defined in ixgbe_hw.h */
+	struct ixgbe_hw hw;
+	u16 msg_enable;
+	struct ixgbe_hw_stats stats;
+
+	u64 tx_busy;
+	unsigned int tx_ring_count;
+	unsigned int rx_ring_count;
+
+	u32 link_speed;
+	bool link_up;
+	unsigned long link_check_timeout;
+
+	struct timer_list service_timer;
+	struct work_struct service_task;
+
+	struct hlist_head fdir_filter_list;
+	unsigned long fdir_overflow; /* number of times ATR was backed off */
+	union ixgbe_atr_input fdir_mask;
+	int fdir_filter_count;
+	u32 fdir_pballoc;
+	u32 atr_sample_rate;
+	spinlock_t fdir_perfect_lock;
+
+#ifdef IXGBE_FCOE
+	struct ixgbe_fcoe fcoe;
+#endif /* IXGBE_FCOE */
+	u8 __iomem *io_addr; /* Mainly for iounmap use */
+	u32 wol;
+
+	u16 bridge_mode;
+
+	u16 eeprom_verh;
+	u16 eeprom_verl;
+	u16 eeprom_cap;
+
+	u32 interrupt_event;
+	u32 led_reg;
+
+	struct ptp_clock *ptp_clock;
+	struct ptp_clock_info ptp_caps;
+	struct work_struct ptp_tx_work;
+	struct sk_buff *ptp_tx_skb;
+	struct hwtstamp_config tstamp_config;
+	unsigned long ptp_tx_start;
+	unsigned long last_overflow_check;
+	unsigned long last_rx_ptp_check;
+	unsigned long last_rx_timestamp;
+	spinlock_t tmreg_lock;
+	struct cyclecounter cc;
+	struct timecounter tc;
+	u32 base_incval;
+
+	/* SR-IOV */
+	DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS);
+	unsigned int num_vfs;
+	struct vf_data_storage *vfinfo;
+	int vf_rate_link_speed;
+	struct vf_macvlans vf_mvs;
+	struct vf_macvlans *mv_list;
+
+	u32 timer_event_accumulator;
+	u32 vferr_refcount;
+	struct ixgbe_mac_addr *mac_table;
+	u16 vxlan_port;
+	struct kobject *info_kobj;
+#ifdef CONFIG_IXGBE_HWMON
+	struct hwmon_buff *ixgbe_hwmon_buff;
+#endif /* CONFIG_IXGBE_HWMON */
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *ixgbe_dbg_adapter;
+#endif /*CONFIG_DEBUG_FS*/
+
+	u8 default_up;
+	unsigned long fwd_bitmask; /* Bitmask indicating in use pools */
+
+/* maximum number of RETA entries among all devices supported by ixgbe
+ * driver: currently it's x550 device in non-SRIOV mode
+ */
+#define IXGBE_MAX_RETA_ENTRIES 512
+	u8 rss_indir_tbl[IXGBE_MAX_RETA_ENTRIES];
+
+#define IXGBE_RSS_KEY_SIZE     40  /* size of RSS Hash Key in bytes */
+	u32 rss_key[IXGBE_RSS_KEY_SIZE / sizeof(u32)];
+};
+
+static inline u8 ixgbe_max_rss_indices(struct ixgbe_adapter *adapter)
+{
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		return IXGBE_MAX_RSS_INDICES;
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		return IXGBE_MAX_RSS_INDICES_X550;
+	default:
+		return 0;
+	}
+}
+
+struct ixgbe_fdir_filter {
+	struct hlist_node fdir_node;
+	union ixgbe_atr_input filter;
+	u16 sw_idx;
+	u16 action;
+};
+
+enum ixgbe_state_t {
+	__IXGBE_TESTING,
+	__IXGBE_RESETTING,
+	__IXGBE_DOWN,
+	__IXGBE_DISABLED,
+	__IXGBE_REMOVING,
+	__IXGBE_SERVICE_SCHED,
+	__IXGBE_SERVICE_INITED,
+	__IXGBE_IN_SFP_INIT,
+	__IXGBE_PTP_RUNNING,
+	__IXGBE_PTP_TX_IN_PROGRESS,
+};
+
+struct ixgbe_cb {
+	union {				/* Union defining head/tail partner */
+		struct sk_buff *head;
+		struct sk_buff *tail;
+	};
+	dma_addr_t dma;
+	u16 append_cnt;
+	bool page_released;
+};
+#define IXGBE_CB(skb) ((struct ixgbe_cb *)(skb)->cb)
+
+enum ixgbe_boards {
+	board_82598,
+	board_82599,
+	board_X540,
+	board_X550,
+	board_X550EM_x,
+};
+
+extern struct ixgbe_info ixgbe_82598_info;
+extern struct ixgbe_info ixgbe_82599_info;
+extern struct ixgbe_info ixgbe_X540_info;
+extern struct ixgbe_info ixgbe_X550_info;
+extern struct ixgbe_info ixgbe_X550EM_x_info;
+#ifdef CONFIG_IXGBE_DCB
+extern const struct dcbnl_rtnl_ops dcbnl_ops;
+#endif
+
+extern char ixgbe_driver_name[];
+extern const char ixgbe_driver_version[];
+#ifdef IXGBE_FCOE
+extern char ixgbe_default_device_descr[];
+#endif /* IXGBE_FCOE */
+
+void ixgbe_up(struct ixgbe_adapter *adapter);
+void ixgbe_down(struct ixgbe_adapter *adapter);
+void ixgbe_reinit_locked(struct ixgbe_adapter *adapter);
+void ixgbe_reset(struct ixgbe_adapter *adapter);
+void ixgbe_set_ethtool_ops(struct net_device *netdev);
+int ixgbe_setup_rx_resources(struct ixgbe_ring *);
+int ixgbe_setup_tx_resources(struct ixgbe_ring *);
+void ixgbe_free_rx_resources(struct ixgbe_ring *);
+void ixgbe_free_tx_resources(struct ixgbe_ring *);
+void ixgbe_configure_rx_ring(struct ixgbe_adapter *, struct ixgbe_ring *);
+void ixgbe_configure_tx_ring(struct ixgbe_adapter *, struct ixgbe_ring *);
+void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter, struct ixgbe_ring *);
+void ixgbe_update_stats(struct ixgbe_adapter *adapter);
+int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
+int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
+			       u16 subdevice_id);
+#ifdef CONFIG_PCI_IOV
+void ixgbe_full_sync_mac_table(struct ixgbe_adapter *adapter);
+#endif
+int ixgbe_add_mac_filter(struct ixgbe_adapter *adapter,
+			 u8 *addr, u16 queue);
+int ixgbe_del_mac_filter(struct ixgbe_adapter *adapter,
+			 u8 *addr, u16 queue);
+void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter);
+netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *, struct ixgbe_adapter *,
+				  struct ixgbe_ring *);
+void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *,
+				      struct ixgbe_tx_buffer *);
+void ixgbe_alloc_rx_buffers(struct ixgbe_ring *, u16);
+void ixgbe_write_eitr(struct ixgbe_q_vector *);
+int ixgbe_poll(struct napi_struct *napi, int budget);
+int ethtool_ioctl(struct ifreq *ifr);
+s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
+s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl);
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl);
+s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_hash_dword input,
+					  union ixgbe_atr_hash_dword common,
+					  u8 queue);
+s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
+				    union ixgbe_atr_input *input_mask);
+s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_input *input,
+					  u16 soft_id, u8 queue);
+s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_input *input,
+					  u16 soft_id);
+void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
+					  union ixgbe_atr_input *mask);
+void ixgbe_set_rx_mode(struct net_device *netdev);
+#ifdef CONFIG_IXGBE_DCB
+void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter);
+#endif
+int ixgbe_setup_tc(struct net_device *dev, u8 tc);
+void ixgbe_tx_ctxtdesc(struct ixgbe_ring *, u32, u32, u32, u32);
+void ixgbe_do_reset(struct net_device *netdev);
+#ifdef CONFIG_IXGBE_HWMON
+void ixgbe_sysfs_exit(struct ixgbe_adapter *adapter);
+int ixgbe_sysfs_init(struct ixgbe_adapter *adapter);
+#endif /* CONFIG_IXGBE_HWMON */
+#ifdef IXGBE_FCOE
+void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter);
+int ixgbe_fso(struct ixgbe_ring *tx_ring, struct ixgbe_tx_buffer *first,
+	      u8 *hdr_len);
+int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
+		   union ixgbe_adv_rx_desc *rx_desc, struct sk_buff *skb);
+int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
+		       struct scatterlist *sgl, unsigned int sgc);
+int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid,
+			  struct scatterlist *sgl, unsigned int sgc);
+int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid);
+int ixgbe_setup_fcoe_ddp_resources(struct ixgbe_adapter *adapter);
+void ixgbe_free_fcoe_ddp_resources(struct ixgbe_adapter *adapter);
+int ixgbe_fcoe_enable(struct net_device *netdev);
+int ixgbe_fcoe_disable(struct net_device *netdev);
+#ifdef CONFIG_IXGBE_DCB
+u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter);
+u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up);
+#endif /* CONFIG_IXGBE_DCB */
+int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type);
+int ixgbe_fcoe_get_hbainfo(struct net_device *netdev,
+			   struct netdev_fcoe_hbainfo *info);
+u8 ixgbe_fcoe_get_tc(struct ixgbe_adapter *adapter);
+#endif /* IXGBE_FCOE */
+#ifdef CONFIG_DEBUG_FS
+void ixgbe_dbg_adapter_init(struct ixgbe_adapter *adapter);
+void ixgbe_dbg_adapter_exit(struct ixgbe_adapter *adapter);
+void ixgbe_dbg_init(void);
+void ixgbe_dbg_exit(void);
+#else
+static inline void ixgbe_dbg_adapter_init(struct ixgbe_adapter *adapter) {}
+static inline void ixgbe_dbg_adapter_exit(struct ixgbe_adapter *adapter) {}
+static inline void ixgbe_dbg_init(void) {}
+static inline void ixgbe_dbg_exit(void) {}
+#endif /* CONFIG_DEBUG_FS */
+static inline struct netdev_queue *txring_txq(const struct ixgbe_ring *ring)
+{
+	return netdev_get_tx_queue(ring->netdev, ring->queue_index);
+}
+
+void ixgbe_ptp_init(struct ixgbe_adapter *adapter);
+void ixgbe_ptp_suspend(struct ixgbe_adapter *adapter);
+void ixgbe_ptp_stop(struct ixgbe_adapter *adapter);
+void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter);
+void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter);
+void ixgbe_ptp_rx_hwtstamp(struct ixgbe_adapter *adapter, struct sk_buff *skb);
+int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr);
+int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr);
+void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter);
+void ixgbe_ptp_reset(struct ixgbe_adapter *adapter);
+void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr);
+#ifdef CONFIG_PCI_IOV
+void ixgbe_sriov_reinit(struct ixgbe_adapter *adapter);
+#endif
+
+netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
+				  struct ixgbe_adapter *adapter,
+				  struct ixgbe_ring *tx_ring);
+u32 ixgbe_rss_indir_tbl_entries(struct ixgbe_adapter *adapter);
+#endif /* _IXGBE_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
new file mode 100644
index 000000000..824a7ab79
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -0,0 +1,1237 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_82598_MAX_TX_QUEUES 32
+#define IXGBE_82598_MAX_RX_QUEUES 64
+#define IXGBE_82598_RAR_ENTRIES   16
+#define IXGBE_82598_MC_TBL_SIZE  128
+#define IXGBE_82598_VFT_TBL_SIZE 128
+#define IXGBE_82598_RX_PB_SIZE	 512
+
+static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
+					 ixgbe_link_speed speed,
+					 bool autoneg_wait_to_complete);
+static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+				       u8 *eeprom_data);
+
+/**
+ *  ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ *  @hw: pointer to the HW structure
+ *
+ *  The defaults for 82598 should be in the range of 50us to 50ms,
+ *  however the hardware default for these parts is 500us to 1ms which is less
+ *  than the 10ms recommended by the pci-e spec.  To address this we need to
+ *  increase the value to either 10ms to 250ms for capability version 1 config,
+ *  or 16ms to 55ms for version 2.
+ **/
+static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+	u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+	u16 pcie_devctl2;
+
+	if (ixgbe_removed(hw->hw_addr))
+		return;
+
+	/* only take action if timeout value is defaulted to 0 */
+	if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+		goto out;
+
+	/*
+	 * if capababilities version is type 1 we can write the
+	 * timeout of 10ms to 250ms through the GCR register
+	 */
+	if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+		gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+		goto out;
+	}
+
+	/*
+	 * for version 2 capabilities we need to write the config space
+	 * directly in order to set the completion timeout value for
+	 * 16ms to 55ms
+	 */
+	pcie_devctl2 = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2);
+	pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+	ixgbe_write_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+	/* disable completion timeout resend */
+	gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+	IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
+static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	/* Call PHY identify routine to get the phy type */
+	ixgbe_identify_phy_generic(hw);
+
+	mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
+	mac->rx_pb_size = IXGBE_82598_RX_PB_SIZE;
+	mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_phy_ops_82598 - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during get_invariants because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+ **/
+static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 list_offset, data_offset;
+
+	/* Identify the PHY */
+	phy->ops.identify(hw);
+
+	/* Overwrite the link function pointers if copper PHY */
+	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+		mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
+		mac->ops.get_link_capabilities =
+			&ixgbe_get_copper_link_capabilities_generic;
+	}
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_tn:
+		phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
+		phy->ops.check_link = &ixgbe_check_phy_link_tnx;
+		phy->ops.get_firmware_version =
+			     &ixgbe_get_phy_firmware_version_tnx;
+		break;
+	case ixgbe_phy_nl:
+		phy->ops.reset = &ixgbe_reset_phy_nl;
+
+		/* Call SFP+ identify routine to get the SFP+ module type */
+		ret_val = phy->ops.identify_sfp(hw);
+		if (ret_val)
+			return ret_val;
+		if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
+			return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+		/* Check to see if SFP+ module is supported */
+		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
+							    &list_offset,
+							    &data_offset);
+		if (ret_val)
+			return IXGBE_ERR_SFP_NOT_SUPPORTED;
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function.
+ *  Disables relaxed ordering for archs other than SPARC
+ *  Then set pcie completion timeout
+ *
+ **/
+static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+#ifndef CONFIG_SPARC
+	u32 regval;
+	u32 i;
+#endif
+	s32 ret_val;
+
+	ret_val = ixgbe_start_hw_generic(hw);
+
+#ifndef CONFIG_SPARC
+	/* Disable relaxed ordering */
+	for (i = 0; ((i < hw->mac.max_tx_queues) &&
+	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+	}
+
+	for (i = 0; ((i < hw->mac.max_rx_queues) &&
+	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+	}
+#endif
+	if (ret_val)
+		return ret_val;
+
+	/* set the completion timeout for interface */
+	ixgbe_set_pcie_completion_timeout(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_link_capabilities_82598 - Determines link capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: boolean auto-negotiation value
+ *
+ *  Determines the link capabilities by reading the AUTOC register.
+ **/
+static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
+					     ixgbe_link_speed *speed,
+					     bool *autoneg)
+{
+	u32 autoc = 0;
+
+	/*
+	 * Determine link capabilities based on the stored value of AUTOC,
+	 * which represents EEPROM defaults.  If AUTOC value has not been
+	 * stored, use the current register value.
+	 */
+	if (hw->mac.orig_link_settings_stored)
+		autoc = hw->mac.orig_autoc;
+	else
+		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		*autoneg = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_1G_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		break;
+
+	case IXGBE_AUTOC_LMS_KX4_AN:
+	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		break;
+
+	default:
+		return IXGBE_ERR_LINK_SETUP;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_media_type_82598 - Determines media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ **/
+static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
+{
+	/* Detect if there is a copper PHY attached. */
+	switch (hw->phy.type) {
+	case ixgbe_phy_cu_unknown:
+	case ixgbe_phy_tn:
+		return ixgbe_media_type_copper;
+
+	default:
+		break;
+	}
+
+	/* Media type for I82598 is based on device ID */
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82598:
+	case IXGBE_DEV_ID_82598_BX:
+		/* Default device ID is mezzanine card KX/KX4 */
+		return ixgbe_media_type_backplane;
+
+	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+	case IXGBE_DEV_ID_82598EB_XF_LR:
+	case IXGBE_DEV_ID_82598EB_SFP_LOM:
+		return ixgbe_media_type_fiber;
+
+	case IXGBE_DEV_ID_82598EB_CX4:
+	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+		return ixgbe_media_type_cx4;
+
+	case IXGBE_DEV_ID_82598AT:
+	case IXGBE_DEV_ID_82598AT2:
+		return ixgbe_media_type_copper;
+
+	default:
+		return ixgbe_media_type_unknown;
+	}
+}
+
+/**
+ *  ixgbe_fc_enable_82598 - Enable flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to the current settings.
+ **/
+static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
+{
+	u32 fctrl_reg;
+	u32 rmcs_reg;
+	u32 reg;
+	u32 fcrtl, fcrth;
+	u32 link_speed = 0;
+	int i;
+	bool link_up;
+
+	/* Validate the water mark configuration */
+	if (!hw->fc.pause_time)
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
+
+	/* Low water mark of zero causes XOFF floods */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+		    hw->fc.high_water[i]) {
+			if (!hw->fc.low_water[i] ||
+			    hw->fc.low_water[i] >= hw->fc.high_water[i]) {
+				hw_dbg(hw, "Invalid water mark configuration\n");
+				return IXGBE_ERR_INVALID_LINK_SETTINGS;
+			}
+		}
+	}
+
+	/*
+	 * On 82598 having Rx FC on causes resets while doing 1G
+	 * so if it's on turn it off once we know link_speed. For
+	 * more details see 82598 Specification update.
+	 */
+	hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+	if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
+		switch (hw->fc.requested_mode) {
+		case ixgbe_fc_full:
+			hw->fc.requested_mode = ixgbe_fc_tx_pause;
+			break;
+		case ixgbe_fc_rx_pause:
+			hw->fc.requested_mode = ixgbe_fc_none;
+			break;
+		default:
+			/* no change */
+			break;
+		}
+	}
+
+	/* Negotiate the fc mode to use */
+	ixgbe_fc_autoneg(hw);
+
+	/* Disable any previous flow control settings */
+	fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
+
+	rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+	rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
+
+	/*
+	 * The possible values of fc.current_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *     we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.current_mode) {
+	case ixgbe_fc_none:
+		/*
+		 * Flow control is disabled by software override or autoneg.
+		 * The code below will actually disable it in the HW.
+		 */
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+		fctrl_reg |= IXGBE_FCTRL_RFCE;
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+		break;
+	case ixgbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		fctrl_reg |= IXGBE_FCTRL_RFCE;
+		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+		break;
+	default:
+		hw_dbg(hw, "Flow control param set incorrectly\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	/* Set 802.3x based flow control settings. */
+	fctrl_reg |= IXGBE_FCTRL_DPF;
+	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
+	IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
+
+	/* Set up and enable Rx high/low water mark thresholds, enable XON. */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+		    hw->fc.high_water[i]) {
+			fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+			fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth);
+		} else {
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
+		}
+
+	}
+
+	/* Configure pause time (2 TCs per register) */
+	reg = hw->fc.pause_time * 0x00010001;
+	for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
+		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+	/* Configure flow control refresh threshold value */
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_start_mac_link_82598 - Configures MAC link settings
+ *  @hw: pointer to hardware structure
+ *
+ *  Configures link settings based on values in the ixgbe_hw struct.
+ *  Restarts the link.  Performs autonegotiation if needed.
+ **/
+static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
+				      bool autoneg_wait_to_complete)
+{
+	u32 autoc_reg;
+	u32 links_reg;
+	u32 i;
+	s32 status = 0;
+
+	/* Restart link */
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+	/* Only poll for autoneg to complete if specified to do so */
+	if (autoneg_wait_to_complete) {
+		if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_AN ||
+		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+			links_reg = 0; /* Just in case Autoneg time = 0 */
+			for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+				links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+				if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+					break;
+				msleep(100);
+			}
+			if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+				status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+				hw_dbg(hw, "Autonegotiation did not complete.\n");
+			}
+		}
+	}
+
+	/* Add delay to filter out noises during initial link setup */
+	msleep(50);
+
+	return status;
+}
+
+/**
+ *  ixgbe_validate_link_ready - Function looks for phy link
+ *  @hw: pointer to hardware structure
+ *
+ *  Function indicates success when phy link is available. If phy is not ready
+ *  within 5 seconds of MAC indicating link, the function returns error.
+ **/
+static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
+{
+	u32 timeout;
+	u16 an_reg;
+
+	if (hw->device_id != IXGBE_DEV_ID_82598AT2)
+		return 0;
+
+	for (timeout = 0;
+	     timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) {
+		hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, &an_reg);
+
+		if ((an_reg & MDIO_AN_STAT1_COMPLETE) &&
+		    (an_reg & MDIO_STAT1_LSTATUS))
+			break;
+
+		msleep(100);
+	}
+
+	if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) {
+		hw_dbg(hw, "Link was indicated but link is down\n");
+		return IXGBE_ERR_LINK_SETUP;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_check_mac_link_82598 - Get link/speed status
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: true is link is up, false otherwise
+ *  @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+				      ixgbe_link_speed *speed, bool *link_up,
+				      bool link_up_wait_to_complete)
+{
+	u32 links_reg;
+	u32 i;
+	u16 link_reg, adapt_comp_reg;
+
+	/*
+	 * SERDES PHY requires us to read link status from register 0xC79F.
+	 * Bit 0 set indicates link is up/ready; clear indicates link down.
+	 * 0xC00C is read to check that the XAUI lanes are active.  Bit 0
+	 * clear indicates active; set indicates inactive.
+	 */
+	if (hw->phy.type == ixgbe_phy_nl) {
+		hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
+		hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
+		hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD,
+				     &adapt_comp_reg);
+		if (link_up_wait_to_complete) {
+			for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+				if ((link_reg & 1) &&
+				    ((adapt_comp_reg & 1) == 0)) {
+					*link_up = true;
+					break;
+				} else {
+					*link_up = false;
+				}
+				msleep(100);
+				hw->phy.ops.read_reg(hw, 0xC79F,
+						     MDIO_MMD_PMAPMD,
+						     &link_reg);
+				hw->phy.ops.read_reg(hw, 0xC00C,
+						     MDIO_MMD_PMAPMD,
+						     &adapt_comp_reg);
+			}
+		} else {
+			if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0))
+				*link_up = true;
+			else
+				*link_up = false;
+		}
+
+		if (!*link_up)
+			return 0;
+	}
+
+	links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+	if (link_up_wait_to_complete) {
+		for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+			if (links_reg & IXGBE_LINKS_UP) {
+				*link_up = true;
+				break;
+			} else {
+				*link_up = false;
+			}
+			msleep(100);
+			links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+		}
+	} else {
+		if (links_reg & IXGBE_LINKS_UP)
+			*link_up = true;
+		else
+			*link_up = false;
+	}
+
+	if (links_reg & IXGBE_LINKS_SPEED)
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+	else
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+	if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && *link_up &&
+	    (ixgbe_validate_link_ready(hw) != 0))
+		*link_up = false;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_setup_mac_link_82598 - Set MAC link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Set the link speed in the AUTOC register and restarts link.
+ **/
+static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
+				      ixgbe_link_speed speed,
+				      bool autoneg_wait_to_complete)
+{
+	bool		 autoneg	   = false;
+	ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+	u32              curr_autoc        = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32              autoc             = curr_autoc;
+	u32              link_mode         = autoc & IXGBE_AUTOC_LMS_MASK;
+
+	/* Check to see if speed passed in is supported. */
+	ixgbe_get_link_capabilities_82598(hw, &link_capabilities, &autoneg);
+	speed &= link_capabilities;
+
+	if (speed == IXGBE_LINK_SPEED_UNKNOWN)
+		return IXGBE_ERR_LINK_SETUP;
+
+	/* Set KX4/KX support according to speed requested */
+	else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
+		 link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+		autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK;
+		if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+			autoc |= IXGBE_AUTOC_KX4_SUPP;
+		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+			autoc |= IXGBE_AUTOC_KX_SUPP;
+		if (autoc != curr_autoc)
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+	}
+
+	/* Setup and restart the link based on the new values in
+	 * ixgbe_hw This will write the AUTOC register based on the new
+	 * stored values
+	 */
+	return ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
+}
+
+
+/**
+ *  ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ *  Sets the link speed in the AUTOC register in the MAC and restarts link.
+ **/
+static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
+					       ixgbe_link_speed speed,
+					       bool autoneg_wait_to_complete)
+{
+	s32 status;
+
+	/* Setup the PHY according to input speed */
+	status = hw->phy.ops.setup_link_speed(hw, speed,
+					      autoneg_wait_to_complete);
+	/* Set up MAC */
+	ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
+
+	return status;
+}
+
+/**
+ *  ixgbe_reset_hw_82598 - Performs hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks and
+ *  clears all interrupts, performing a PHY reset, and performing a link (MAC)
+ *  reset.
+ **/
+static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
+{
+	s32 status;
+	s32 phy_status = 0;
+	u32 ctrl;
+	u32 gheccr;
+	u32 i;
+	u32 autoc;
+	u8  analog_val;
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	status = hw->mac.ops.stop_adapter(hw);
+	if (status)
+		return status;
+
+	/*
+	 * Power up the Atlas Tx lanes if they are currently powered down.
+	 * Atlas Tx lanes are powered down for MAC loopback tests, but
+	 * they are not automatically restored on reset.
+	 */
+	hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
+	if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
+		/* Enable Tx Atlas so packets can be transmitted again */
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+					     &analog_val);
+		analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+					      analog_val);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+					     &analog_val);
+		analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+					      analog_val);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+					     &analog_val);
+		analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+					      analog_val);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+					     &analog_val);
+		analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+					      analog_val);
+	}
+
+	/* Reset PHY */
+	if (hw->phy.reset_disable == false) {
+		/* PHY ops must be identified and initialized prior to reset */
+
+		/* Init PHY and function pointers, perform SFP setup */
+		phy_status = hw->phy.ops.init(hw);
+		if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+			return phy_status;
+		if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
+			goto mac_reset_top;
+
+		hw->phy.ops.reset(hw);
+	}
+
+mac_reset_top:
+	/*
+	 * Issue global reset to the MAC.  This needs to be a SW reset.
+	 * If link reset is used, it might reset the MAC when mng is using it
+	 */
+	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST;
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear indicating reset is complete */
+	for (i = 0; i < 10; i++) {
+		udelay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST))
+			break;
+	}
+	if (ctrl & IXGBE_CTRL_RST) {
+		status = IXGBE_ERR_RESET_FAILED;
+		hw_dbg(hw, "Reset polling failed to complete.\n");
+	}
+
+	msleep(50);
+
+	/*
+	 * Double resets are required for recovery from certain error
+	 * conditions.  Between resets, it is necessary to stall to allow time
+	 * for any pending HW events to complete.
+	 */
+	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+		goto mac_reset_top;
+	}
+
+	gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
+	gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
+	IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
+
+	/*
+	 * Store the original AUTOC value if it has not been
+	 * stored off yet.  Otherwise restore the stored original
+	 * AUTOC value since the reset operation sets back to deaults.
+	 */
+	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	if (hw->mac.orig_link_settings_stored == false) {
+		hw->mac.orig_autoc = autoc;
+		hw->mac.orig_link_settings_stored = true;
+	} else if (autoc != hw->mac.orig_autoc) {
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
+	}
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table
+	 */
+	hw->mac.ops.init_rx_addrs(hw);
+
+	if (phy_status)
+		status = phy_status;
+
+	return status;
+}
+
+/**
+ *  ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to associate with a VMDq index
+ *  @vmdq: VMDq set index
+ **/
+static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+	rar_high &= ~IXGBE_RAH_VIND_MASK;
+	rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+	return 0;
+}
+
+/**
+ *  ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to associate with a VMDq index
+ *  @vmdq: VMDq clear index (not used in 82598, but elsewhere)
+ **/
+static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+	if (rar_high & IXGBE_RAH_VIND_MASK) {
+		rar_high &= ~IXGBE_RAH_VIND_MASK;
+		IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_set_vfta_82598 - Set VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFTA
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ *  Turn on/off specified VLAN in the VLAN filter table.
+ **/
+static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+				bool vlan_on)
+{
+	u32 regindex;
+	u32 bitindex;
+	u32 bits;
+	u32 vftabyte;
+
+	if (vlan > 4095)
+		return IXGBE_ERR_PARAM;
+
+	/* Determine 32-bit word position in array */
+	regindex = (vlan >> 5) & 0x7F;   /* upper seven bits */
+
+	/* Determine the location of the (VMD) queue index */
+	vftabyte =  ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
+	bitindex = (vlan & 0x7) << 2;    /* lower 3 bits indicate nibble */
+
+	/* Set the nibble for VMD queue index */
+	bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex));
+	bits &= (~(0x0F << bitindex));
+	bits |= (vind << bitindex);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits);
+
+	/* Determine the location of the bit for this VLAN id */
+	bitindex = vlan & 0x1F;   /* lower five bits */
+
+	bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+	if (vlan_on)
+		/* Turn on this VLAN id */
+		bits |= (1 << bitindex);
+	else
+		/* Turn off this VLAN id */
+		bits &= ~(1 << bitindex);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_clear_vfta_82598 - Clear VLAN filter table
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
+{
+	u32 offset;
+	u32 vlanbyte;
+
+	for (offset = 0; offset < hw->mac.vft_size; offset++)
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+	for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
+		for (offset = 0; offset < hw->mac.vft_size; offset++)
+			IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
+					0);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: analog register to read
+ *  @val: read value
+ *
+ *  Performs read operation to Atlas analog register specified.
+ **/
+static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+	u32  atlas_ctl;
+
+	IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
+			IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(10);
+	atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
+	*val = (u8)atlas_ctl;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: atlas register to write
+ *  @val: value to write
+ *
+ *  Performs write operation to Atlas analog register specified.
+ **/
+static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+	u32  atlas_ctl;
+
+	atlas_ctl = (reg << 8) | val;
+	IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(10);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface.
+ *  @hw: pointer to hardware structure
+ *  @dev_addr: address to read from
+ *  @byte_offset: byte offset to read from dev_addr
+ *  @eeprom_data: value read
+ *
+ *  Performs 8 byte read operation to SFP module's data over I2C interface.
+ **/
+static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr,
+				    u8 byte_offset, u8 *eeprom_data)
+{
+	s32 status = 0;
+	u16 sfp_addr = 0;
+	u16 sfp_data = 0;
+	u16 sfp_stat = 0;
+	u16 gssr;
+	u32 i;
+
+	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+		gssr = IXGBE_GSSR_PHY1_SM;
+	else
+		gssr = IXGBE_GSSR_PHY0_SM;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0)
+		return IXGBE_ERR_SWFW_SYNC;
+
+	if (hw->phy.type == ixgbe_phy_nl) {
+		/*
+		 * phy SDA/SCL registers are at addresses 0xC30A to
+		 * 0xC30D.  These registers are used to talk to the SFP+
+		 * module's EEPROM through the SDA/SCL (I2C) interface.
+		 */
+		sfp_addr = (dev_addr << 8) + byte_offset;
+		sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
+		hw->phy.ops.write_reg_mdi(hw,
+					  IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
+					  MDIO_MMD_PMAPMD,
+					  sfp_addr);
+
+		/* Poll status */
+		for (i = 0; i < 100; i++) {
+			hw->phy.ops.read_reg_mdi(hw,
+						IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
+						MDIO_MMD_PMAPMD,
+						&sfp_stat);
+			sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
+			if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
+				break;
+			usleep_range(10000, 20000);
+		}
+
+		if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
+			hw_dbg(hw, "EEPROM read did not pass.\n");
+			status = IXGBE_ERR_SFP_NOT_PRESENT;
+			goto out;
+		}
+
+		/* Read data */
+		hw->phy.ops.read_reg_mdi(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
+					MDIO_MMD_PMAPMD, &sfp_data);
+
+		*eeprom_data = (u8)(sfp_data >> 8);
+	} else {
+		status = IXGBE_ERR_PHY;
+	}
+
+out:
+	hw->mac.ops.release_swfw_sync(hw, gssr);
+	return status;
+}
+
+/**
+ *  ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: EEPROM byte offset to read
+ *  @eeprom_data: value read
+ *
+ *  Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+				       u8 *eeprom_data)
+{
+	return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR,
+					byte_offset, eeprom_data);
+}
+
+/**
+ *  ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset at address 0xA2
+ *  @eeprom_data: value read
+ *
+ *  Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
+ **/
+static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
+				       u8 *sff8472_data)
+{
+	return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2,
+					byte_offset, sff8472_data);
+}
+
+/**
+ *  ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
+ *  port devices.
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls common function and corrects issue with some single port devices
+ *  that enable LAN1 but not LAN0.
+ **/
+static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
+{
+	struct ixgbe_bus_info *bus = &hw->bus;
+	u16 pci_gen = 0;
+	u16 pci_ctrl2 = 0;
+
+	ixgbe_set_lan_id_multi_port_pcie(hw);
+
+	/* check if LAN0 is disabled */
+	hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen);
+	if ((pci_gen != 0) && (pci_gen != 0xFFFF)) {
+
+		hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2);
+
+		/* if LAN0 is completely disabled force function to 0 */
+		if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) &&
+		    !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) &&
+		    !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) {
+
+			bus->func = 0;
+		}
+	}
+}
+
+/**
+ * ixgbe_set_rxpba_82598 - Initialize RX packet buffer
+ * @hw: pointer to hardware structure
+ * @num_pb: number of packet buffers to allocate
+ * @headroom: reserve n KB of headroom
+ * @strategy: packet buffer allocation strategy
+ **/
+static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
+				  u32 headroom, int strategy)
+{
+	u32 rxpktsize = IXGBE_RXPBSIZE_64KB;
+	u8  i = 0;
+
+	if (!num_pb)
+		return;
+
+	/* Setup Rx packet buffer sizes */
+	switch (strategy) {
+	case PBA_STRATEGY_WEIGHTED:
+		/* Setup the first four at 80KB */
+		rxpktsize = IXGBE_RXPBSIZE_80KB;
+		for (; i < 4; i++)
+			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+		/* Setup the last four at 48KB...don't re-init i */
+		rxpktsize = IXGBE_RXPBSIZE_48KB;
+		/* Fall Through */
+	case PBA_STRATEGY_EQUAL:
+	default:
+		/* Divide the remaining Rx packet buffer evenly among the TCs */
+		for (; i < IXGBE_MAX_PACKET_BUFFERS; i++)
+			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+		break;
+	}
+
+	/* Setup Tx packet buffer sizes */
+	for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB);
+}
+
+static struct ixgbe_mac_operations mac_ops_82598 = {
+	.init_hw		= &ixgbe_init_hw_generic,
+	.reset_hw		= &ixgbe_reset_hw_82598,
+	.start_hw		= &ixgbe_start_hw_82598,
+	.clear_hw_cntrs		= &ixgbe_clear_hw_cntrs_generic,
+	.get_media_type		= &ixgbe_get_media_type_82598,
+	.enable_rx_dma          = &ixgbe_enable_rx_dma_generic,
+	.get_mac_addr		= &ixgbe_get_mac_addr_generic,
+	.stop_adapter		= &ixgbe_stop_adapter_generic,
+	.get_bus_info           = &ixgbe_get_bus_info_generic,
+	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie_82598,
+	.read_analog_reg8	= &ixgbe_read_analog_reg8_82598,
+	.write_analog_reg8	= &ixgbe_write_analog_reg8_82598,
+	.setup_link		= &ixgbe_setup_mac_link_82598,
+	.set_rxpba		= &ixgbe_set_rxpba_82598,
+	.check_link		= &ixgbe_check_mac_link_82598,
+	.get_link_capabilities	= &ixgbe_get_link_capabilities_82598,
+	.led_on			= &ixgbe_led_on_generic,
+	.led_off		= &ixgbe_led_off_generic,
+	.blink_led_start	= &ixgbe_blink_led_start_generic,
+	.blink_led_stop		= &ixgbe_blink_led_stop_generic,
+	.set_rar		= &ixgbe_set_rar_generic,
+	.clear_rar		= &ixgbe_clear_rar_generic,
+	.set_vmdq		= &ixgbe_set_vmdq_82598,
+	.clear_vmdq		= &ixgbe_clear_vmdq_82598,
+	.init_rx_addrs		= &ixgbe_init_rx_addrs_generic,
+	.update_mc_addr_list	= &ixgbe_update_mc_addr_list_generic,
+	.enable_mc		= &ixgbe_enable_mc_generic,
+	.disable_mc		= &ixgbe_disable_mc_generic,
+	.clear_vfta		= &ixgbe_clear_vfta_82598,
+	.set_vfta		= &ixgbe_set_vfta_82598,
+	.fc_enable		= &ixgbe_fc_enable_82598,
+	.set_fw_drv_ver         = NULL,
+	.acquire_swfw_sync      = &ixgbe_acquire_swfw_sync,
+	.release_swfw_sync      = &ixgbe_release_swfw_sync,
+	.get_thermal_sensor_data = NULL,
+	.init_thermal_sensor_thresh = NULL,
+	.prot_autoc_read	= &prot_autoc_read_generic,
+	.prot_autoc_write	= &prot_autoc_write_generic,
+	.enable_rx		= &ixgbe_enable_rx_generic,
+	.disable_rx		= &ixgbe_disable_rx_generic,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
+	.init_params		= &ixgbe_init_eeprom_params_generic,
+	.read			= &ixgbe_read_eerd_generic,
+	.write			= &ixgbe_write_eeprom_generic,
+	.write_buffer		= &ixgbe_write_eeprom_buffer_bit_bang_generic,
+	.read_buffer		= &ixgbe_read_eerd_buffer_generic,
+	.calc_checksum          = &ixgbe_calc_eeprom_checksum_generic,
+	.validate_checksum	= &ixgbe_validate_eeprom_checksum_generic,
+	.update_checksum	= &ixgbe_update_eeprom_checksum_generic,
+};
+
+static struct ixgbe_phy_operations phy_ops_82598 = {
+	.identify		= &ixgbe_identify_phy_generic,
+	.identify_sfp		= &ixgbe_identify_module_generic,
+	.init			= &ixgbe_init_phy_ops_82598,
+	.reset			= &ixgbe_reset_phy_generic,
+	.read_reg		= &ixgbe_read_phy_reg_generic,
+	.write_reg		= &ixgbe_write_phy_reg_generic,
+	.read_reg_mdi		= &ixgbe_read_phy_reg_mdi,
+	.write_reg_mdi		= &ixgbe_write_phy_reg_mdi,
+	.setup_link		= &ixgbe_setup_phy_link_generic,
+	.setup_link_speed	= &ixgbe_setup_phy_link_speed_generic,
+	.read_i2c_sff8472	= &ixgbe_read_i2c_sff8472_82598,
+	.read_i2c_eeprom	= &ixgbe_read_i2c_eeprom_82598,
+	.check_overtemp   = &ixgbe_tn_check_overtemp,
+};
+
+struct ixgbe_info ixgbe_82598_info = {
+	.mac			= ixgbe_mac_82598EB,
+	.get_invariants		= &ixgbe_get_invariants_82598,
+	.mac_ops		= &mac_ops_82598,
+	.eeprom_ops		= &eeprom_ops_82598,
+	.phy_ops		= &phy_ops_82598,
+};
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
new file mode 100644
index 000000000..e0c363948
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -0,0 +1,2381 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+#include "ixgbe_mbx.h"
+
+#define IXGBE_82599_MAX_TX_QUEUES 128
+#define IXGBE_82599_MAX_RX_QUEUES 128
+#define IXGBE_82599_RAR_ENTRIES   128
+#define IXGBE_82599_MC_TBL_SIZE   128
+#define IXGBE_82599_VFT_TBL_SIZE  128
+#define IXGBE_82599_RX_PB_SIZE	  512
+
+static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+						 ixgbe_link_speed speed,
+						 bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+					   ixgbe_link_speed speed,
+					   bool autoneg_wait_to_complete);
+static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw);
+static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+				      bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
+			       ixgbe_link_speed speed,
+			       bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+					 ixgbe_link_speed speed,
+					 bool autoneg_wait_to_complete);
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+				     u8 dev_addr, u8 *data);
+static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+				      u8 dev_addr, u8 data);
+static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
+
+bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
+{
+	u32 fwsm, manc, factps;
+
+	fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
+	if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT)
+		return false;
+
+	manc = IXGBE_READ_REG(hw, IXGBE_MANC);
+	if (!(manc & IXGBE_MANC_RCV_TCO_EN))
+		return false;
+
+	factps = IXGBE_READ_REG(hw, IXGBE_FACTPS);
+	if (factps & IXGBE_FACTPS_MNGCG)
+		return false;
+
+	return true;
+}
+
+static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	/* enable the laser control functions for SFP+ fiber
+	 * and MNG not enabled
+	 */
+	if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+	    !ixgbe_mng_enabled(hw)) {
+		mac->ops.disable_tx_laser =
+				       &ixgbe_disable_tx_laser_multispeed_fiber;
+		mac->ops.enable_tx_laser =
+					&ixgbe_enable_tx_laser_multispeed_fiber;
+		mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
+	} else {
+		mac->ops.disable_tx_laser = NULL;
+		mac->ops.enable_tx_laser = NULL;
+		mac->ops.flap_tx_laser = NULL;
+	}
+
+	if (hw->phy.multispeed_fiber) {
+		/* Set up dual speed SFP+ support */
+		mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+	} else {
+		if ((mac->ops.get_media_type(hw) ==
+		     ixgbe_media_type_backplane) &&
+		    (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
+		     hw->phy.smart_speed == ixgbe_smart_speed_on) &&
+		     !ixgbe_verify_lesm_fw_enabled_82599(hw))
+			mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
+		else
+			mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
+	}
+}
+
+static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
+{
+	s32 ret_val;
+	u16 list_offset, data_offset, data_value;
+
+	if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
+		ixgbe_init_mac_link_ops_82599(hw);
+
+		hw->phy.ops.reset = NULL;
+
+		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+							      &data_offset);
+		if (ret_val)
+			return ret_val;
+
+		/* PHY config will finish before releasing the semaphore */
+		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+							IXGBE_GSSR_MAC_CSR_SM);
+		if (ret_val)
+			return IXGBE_ERR_SWFW_SYNC;
+
+		if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+			goto setup_sfp_err;
+		while (data_value != 0xffff) {
+			IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
+			IXGBE_WRITE_FLUSH(hw);
+			if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+				goto setup_sfp_err;
+		}
+
+		/* Release the semaphore */
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+		/*
+		 * Delay obtaining semaphore again to allow FW access,
+		 * semaphore_delay is in ms usleep_range needs us.
+		 */
+		usleep_range(hw->eeprom.semaphore_delay * 1000,
+			     hw->eeprom.semaphore_delay * 2000);
+
+		/* Restart DSP and set SFI mode */
+		ret_val = hw->mac.ops.prot_autoc_write(hw,
+			hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL,
+			false);
+
+		if (ret_val) {
+			hw_dbg(hw, " sfp module setup not complete\n");
+			return IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
+		}
+	}
+
+	return 0;
+
+setup_sfp_err:
+	/* Release the semaphore */
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+	/* Delay obtaining semaphore again to allow FW access,
+	 * semaphore_delay is in ms usleep_range needs us.
+	 */
+	usleep_range(hw->eeprom.semaphore_delay * 1000,
+		     hw->eeprom.semaphore_delay * 2000);
+	hw_err(hw, "eeprom read at offset %d failed\n", data_offset);
+	return IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
+}
+
+/**
+ *  prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read
+ *  @hw: pointer to hardware structure
+ *  @locked: Return the if we locked for this read.
+ *  @reg_val: Value we read from AUTOC
+ *
+ *  For this part (82599) we need to wrap read-modify-writes with a possible
+ *  FW/SW lock.  It is assumed this lock will be freed with the next
+ *  prot_autoc_write_82599().  Note, that locked can only be true in cases
+ *  where this function doesn't return an error.
+ **/
+static s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked,
+				 u32 *reg_val)
+{
+	s32 ret_val;
+
+	*locked = false;
+	/* If LESM is on then we need to hold the SW/FW semaphore. */
+	if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+					IXGBE_GSSR_MAC_CSR_SM);
+		if (ret_val)
+			return IXGBE_ERR_SWFW_SYNC;
+
+		*locked = true;
+	}
+
+	*reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	return 0;
+}
+
+/**
+ * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
+ * @hw: pointer to hardware structure
+ * @reg_val: value to write to AUTOC
+ * @locked: bool to indicate whether the SW/FW lock was already taken by
+ *	     previous proc_autoc_read_82599.
+ *
+ * This part (82599) may need to hold a the SW/FW lock around all writes to
+ * AUTOC. Likewise after a write we need to do a pipeline reset.
+ **/
+static s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
+{
+	s32 ret_val = 0;
+
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		goto out;
+
+	/* We only need to get the lock if:
+	 *  - We didn't do it already (in the read part of a read-modify-write)
+	 *  - LESM is enabled.
+	 */
+	if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+					IXGBE_GSSR_MAC_CSR_SM);
+		if (ret_val)
+			return IXGBE_ERR_SWFW_SYNC;
+
+		locked = true;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+	ret_val = ixgbe_reset_pipeline_82599(hw);
+
+out:
+	/* Free the SW/FW semaphore as we either grabbed it here or
+	 * already had it when this function was called.
+	 */
+	if (locked)
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+
+	return ret_val;
+}
+
+static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	ixgbe_init_mac_link_ops_82599(hw);
+
+	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
+	mac->rx_pb_size = IXGBE_82599_RX_PB_SIZE;
+	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_phy_ops_82599 - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during get_invariants because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+ **/
+static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u32 esdp;
+
+	if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) {
+		/* Store flag indicating I2C bus access control unit. */
+		hw->phy.qsfp_shared_i2c_bus = true;
+
+		/* Initialize access to QSFP+ I2C bus */
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		esdp |= IXGBE_ESDP_SDP0_DIR;
+		esdp &= ~IXGBE_ESDP_SDP1_DIR;
+		esdp &= ~IXGBE_ESDP_SDP0;
+		esdp &= ~IXGBE_ESDP_SDP0_NATIVE;
+		esdp &= ~IXGBE_ESDP_SDP1_NATIVE;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_FLUSH(hw);
+
+		phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599;
+		phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599;
+	}
+
+	/* Identify the PHY or SFP module */
+	ret_val = phy->ops.identify(hw);
+
+	/* Setup function pointers based on detected SFP module and speeds */
+	ixgbe_init_mac_link_ops_82599(hw);
+
+	/* If copper media, overwrite with copper function pointers */
+	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+		mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
+		mac->ops.get_link_capabilities =
+			&ixgbe_get_copper_link_capabilities_generic;
+	}
+
+	/* Set necessary function pointers based on phy type */
+	switch (hw->phy.type) {
+	case ixgbe_phy_tn:
+		phy->ops.check_link = &ixgbe_check_phy_link_tnx;
+		phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
+		phy->ops.get_firmware_version =
+			     &ixgbe_get_phy_firmware_version_tnx;
+		break;
+	default:
+		break;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_get_link_capabilities_82599 - Determines link capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: true when autoneg or autotry is enabled
+ *
+ *  Determines the link capabilities by reading the AUTOC register.
+ **/
+static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+					     ixgbe_link_speed *speed,
+					     bool *autoneg)
+{
+	u32 autoc = 0;
+
+	/* Determine 1G link capabilities off of SFP+ type */
+	if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		return 0;
+	}
+
+	/*
+	 * Determine link capabilities based on the stored value of AUTOC,
+	 * which represents EEPROM defaults.  If AUTOC value has not been
+	 * stored, use the current register value.
+	 */
+	if (hw->mac.orig_link_settings_stored)
+		autoc = hw->mac.orig_autoc;
+	else
+		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		*autoneg = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_1G_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		break;
+
+	case IXGBE_AUTOC_LMS_10G_SERIAL:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		*autoneg = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_KX4_KX_KR:
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		break;
+
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
+		*speed = IXGBE_LINK_SPEED_100_FULL;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+		break;
+
+	case IXGBE_AUTOC_LMS_SGMII_1G_100M:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
+		*autoneg = false;
+		break;
+
+	default:
+		return IXGBE_ERR_LINK_SETUP;
+	}
+
+	if (hw->phy.multispeed_fiber) {
+		*speed |= IXGBE_LINK_SPEED_10GB_FULL |
+			  IXGBE_LINK_SPEED_1GB_FULL;
+
+		/* QSFP must not enable auto-negotiation */
+		if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
+			*autoneg = false;
+		else
+			*autoneg = true;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_media_type_82599 - Get media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ **/
+static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
+{
+	/* Detect if there is a copper PHY attached. */
+	switch (hw->phy.type) {
+	case ixgbe_phy_cu_unknown:
+	case ixgbe_phy_tn:
+		return ixgbe_media_type_copper;
+
+	default:
+		break;
+	}
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82599_KX4:
+	case IXGBE_DEV_ID_82599_KX4_MEZZ:
+	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+	case IXGBE_DEV_ID_82599_KR:
+	case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
+	case IXGBE_DEV_ID_82599_XAUI_LOM:
+		/* Default device ID is mezzanine card KX/KX4 */
+		return ixgbe_media_type_backplane;
+
+	case IXGBE_DEV_ID_82599_SFP:
+	case IXGBE_DEV_ID_82599_SFP_FCOE:
+	case IXGBE_DEV_ID_82599_SFP_EM:
+	case IXGBE_DEV_ID_82599_SFP_SF2:
+	case IXGBE_DEV_ID_82599_SFP_SF_QP:
+	case IXGBE_DEV_ID_82599EN_SFP:
+		return ixgbe_media_type_fiber;
+
+	case IXGBE_DEV_ID_82599_CX4:
+		return ixgbe_media_type_cx4;
+
+	case IXGBE_DEV_ID_82599_T3_LOM:
+		return ixgbe_media_type_copper;
+
+	case IXGBE_DEV_ID_82599_LS:
+		return ixgbe_media_type_fiber_lco;
+
+	case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+		return ixgbe_media_type_fiber_qsfp;
+
+	default:
+		return ixgbe_media_type_unknown;
+	}
+}
+
+/**
+ * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3
+ * @hw: pointer to hardware structure
+ *
+ * Disables link, should be called during D3 power down sequence.
+ *
+ **/
+static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
+{
+	u32 autoc2_reg, fwsm;
+	u16 ee_ctrl_2 = 0;
+
+	hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2);
+
+	/* Check to see if MNG FW could be enabled */
+	fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
+
+	if (((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT) &&
+	    !hw->wol_enabled &&
+	    ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) {
+		autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+		autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
+	}
+}
+
+/**
+ *  ixgbe_start_mac_link_82599 - Setup MAC link settings
+ *  @hw: pointer to hardware structure
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Configures link settings based on values in the ixgbe_hw struct.
+ *  Restarts the link.  Performs autonegotiation if needed.
+ **/
+static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+			       bool autoneg_wait_to_complete)
+{
+	u32 autoc_reg;
+	u32 links_reg;
+	u32 i;
+	s32 status = 0;
+	bool got_lock = false;
+
+	if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+		status = hw->mac.ops.acquire_swfw_sync(hw,
+						IXGBE_GSSR_MAC_CSR_SM);
+		if (status)
+			return status;
+
+		got_lock = true;
+	}
+
+	/* Restart link */
+	ixgbe_reset_pipeline_82599(hw);
+
+	if (got_lock)
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+
+	/* Only poll for autoneg to complete if specified to do so */
+	if (autoneg_wait_to_complete) {
+		autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+		if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_KX_KR ||
+		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+			links_reg = 0; /* Just in case Autoneg time = 0 */
+			for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+				links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+				if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+					break;
+				msleep(100);
+			}
+			if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+				status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+				hw_dbg(hw, "Autoneg did not complete.\n");
+			}
+		}
+	}
+
+	/* Add delay to filter out noises during initial link setup */
+	msleep(50);
+
+	return status;
+}
+
+/**
+ *  ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  The base drivers may require better control over SFP+ module
+ *  PHY states.  This includes selectively shutting down the Tx
+ *  laser on the PHY, effectively halting physical link.
+ **/
+static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		return;
+
+	/* Disable tx laser; allow 100us to go dark per spec */
+	esdp_reg |= IXGBE_ESDP_SDP3;
+	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(100);
+}
+
+/**
+ *  ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  The base drivers may require better control over SFP+ module
+ *  PHY states.  This includes selectively turning on the Tx
+ *  laser on the PHY, effectively starting physical link.
+ **/
+static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+	/* Enable tx laser; allow 100ms to light up */
+	esdp_reg &= ~IXGBE_ESDP_SDP3;
+	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+	IXGBE_WRITE_FLUSH(hw);
+	msleep(100);
+}
+
+/**
+ *  ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  When the driver changes the link speeds that it can support,
+ *  it sets autotry_restart to true to indicate that we need to
+ *  initiate a new autotry session with the link partner.  To do
+ *  so, we set the speed then disable and re-enable the tx laser, to
+ *  alert the link partner that it also needs to restart autotry on its
+ *  end.  This is consistent with true clause 37 autoneg, which also
+ *  involves a loss of signal.
+ **/
+static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		return;
+
+	if (hw->mac.autotry_restart) {
+		ixgbe_disable_tx_laser_multispeed_fiber(hw);
+		ixgbe_enable_tx_laser_multispeed_fiber(hw);
+		hw->mac.autotry_restart = false;
+	}
+}
+
+/**
+ *  ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Set the link speed in the AUTOC register and restarts link.
+ **/
+static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+					  ixgbe_link_speed speed,
+					  bool autoneg_wait_to_complete)
+{
+	s32 status = 0;
+	ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+	ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+	u32 speedcnt = 0;
+	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+	u32 i = 0;
+	bool link_up = false;
+	bool autoneg = false;
+
+	/* Mask off requested but non-supported speeds */
+	status = hw->mac.ops.get_link_capabilities(hw, &link_speed,
+						   &autoneg);
+	if (status != 0)
+		return status;
+
+	speed &= link_speed;
+
+	/*
+	 * Try each speed one by one, highest priority first.  We do this in
+	 * software because 10gb fiber doesn't support speed autonegotiation.
+	 */
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+		speedcnt++;
+		highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+		/* If we already have link at this speed, just jump out */
+		status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+						false);
+		if (status != 0)
+			return status;
+
+		if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
+			goto out;
+
+		/* Set the module link speed */
+		switch (hw->phy.media_type) {
+		case ixgbe_media_type_fiber:
+			esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+			IXGBE_WRITE_FLUSH(hw);
+			break;
+		case ixgbe_media_type_fiber_qsfp:
+			/* QSFP module automatically detects MAC link speed */
+			break;
+		default:
+			hw_dbg(hw, "Unexpected media type.\n");
+			break;
+		}
+
+		/* Allow module to change analog characteristics (1G->10G) */
+		msleep(40);
+
+		status = ixgbe_setup_mac_link_82599(hw,
+						    IXGBE_LINK_SPEED_10GB_FULL,
+						    autoneg_wait_to_complete);
+		if (status != 0)
+			return status;
+
+		/* Flap the tx laser if it has not already been done */
+		if (hw->mac.ops.flap_tx_laser)
+			hw->mac.ops.flap_tx_laser(hw);
+
+		/*
+		 * Wait for the controller to acquire link.  Per IEEE 802.3ap,
+		 * Section 73.10.2, we may have to wait up to 500ms if KR is
+		 * attempted.  82599 uses the same timing for 10g SFI.
+		 */
+		for (i = 0; i < 5; i++) {
+			/* Wait for the link partner to also set speed */
+			msleep(100);
+
+			/* If we have link, just jump out */
+			status = hw->mac.ops.check_link(hw, &link_speed,
+							&link_up, false);
+			if (status != 0)
+				return status;
+
+			if (link_up)
+				goto out;
+		}
+	}
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+		speedcnt++;
+		if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
+			highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+		/* If we already have link at this speed, just jump out */
+		status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+						false);
+		if (status != 0)
+			return status;
+
+		if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
+			goto out;
+
+		/* Set the module link speed */
+		switch (hw->phy.media_type) {
+		case ixgbe_media_type_fiber:
+			esdp_reg &= ~IXGBE_ESDP_SDP5;
+			esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+			IXGBE_WRITE_FLUSH(hw);
+			break;
+		case ixgbe_media_type_fiber_qsfp:
+			/* QSFP module automatically detects MAC link speed */
+			break;
+		default:
+			hw_dbg(hw, "Unexpected media type.\n");
+			break;
+		}
+
+		/* Allow module to change analog characteristics (10G->1G) */
+		msleep(40);
+
+		status = ixgbe_setup_mac_link_82599(hw,
+						    IXGBE_LINK_SPEED_1GB_FULL,
+						    autoneg_wait_to_complete);
+		if (status != 0)
+			return status;
+
+		/* Flap the tx laser if it has not already been done */
+		if (hw->mac.ops.flap_tx_laser)
+			hw->mac.ops.flap_tx_laser(hw);
+
+		/* Wait for the link partner to also set speed */
+		msleep(100);
+
+		/* If we have link, just jump out */
+		status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+						false);
+		if (status != 0)
+			return status;
+
+		if (link_up)
+			goto out;
+	}
+
+	/*
+	 * We didn't get link.  Configure back to the highest speed we tried,
+	 * (if there was more than one).  We call ourselves back with just the
+	 * single highest speed that the user requested.
+	 */
+	if (speedcnt > 1)
+		status = ixgbe_setup_mac_link_multispeed_fiber(hw,
+							       highest_link_speed,
+							       autoneg_wait_to_complete);
+
+out:
+	/* Set autoneg_advertised value based on input link speed */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Implements the Intel SmartSpeed algorithm.
+ **/
+static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+				     ixgbe_link_speed speed,
+				     bool autoneg_wait_to_complete)
+{
+	s32 status = 0;
+	ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+	s32 i, j;
+	bool link_up = false;
+	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	 /* Set autoneg_advertised value based on input link speed */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_100_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+	/*
+	 * Implement Intel SmartSpeed algorithm.  SmartSpeed will reduce the
+	 * autoneg advertisement if link is unable to be established at the
+	 * highest negotiated rate.  This can sometimes happen due to integrity
+	 * issues with the physical media connection.
+	 */
+
+	/* First, try to get link with full advertisement */
+	hw->phy.smart_speed_active = false;
+	for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
+		status = ixgbe_setup_mac_link_82599(hw, speed,
+						    autoneg_wait_to_complete);
+		if (status != 0)
+			goto out;
+
+		/*
+		 * Wait for the controller to acquire link.  Per IEEE 802.3ap,
+		 * Section 73.10.2, we may have to wait up to 500ms if KR is
+		 * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per
+		 * Table 9 in the AN MAS.
+		 */
+		for (i = 0; i < 5; i++) {
+			mdelay(100);
+
+			/* If we have link, just jump out */
+			status = hw->mac.ops.check_link(hw, &link_speed,
+							&link_up, false);
+			if (status != 0)
+				goto out;
+
+			if (link_up)
+				goto out;
+		}
+	}
+
+	/*
+	 * We didn't get link.  If we advertised KR plus one of KX4/KX
+	 * (or BX4/BX), then disable KR and try again.
+	 */
+	if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) ||
+	    ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0))
+		goto out;
+
+	/* Turn SmartSpeed on to disable KR support */
+	hw->phy.smart_speed_active = true;
+	status = ixgbe_setup_mac_link_82599(hw, speed,
+					    autoneg_wait_to_complete);
+	if (status != 0)
+		goto out;
+
+	/*
+	 * Wait for the controller to acquire link.  600ms will allow for
+	 * the AN link_fail_inhibit_timer as well for multiple cycles of
+	 * parallel detect, both 10g and 1g. This allows for the maximum
+	 * connect attempts as defined in the AN MAS table 73-7.
+	 */
+	for (i = 0; i < 6; i++) {
+		mdelay(100);
+
+		/* If we have link, just jump out */
+		status = hw->mac.ops.check_link(hw, &link_speed,
+						&link_up, false);
+		if (status != 0)
+			goto out;
+
+		if (link_up)
+			goto out;
+	}
+
+	/* We didn't get link.  Turn SmartSpeed back off. */
+	hw->phy.smart_speed_active = false;
+	status = ixgbe_setup_mac_link_82599(hw, speed,
+					    autoneg_wait_to_complete);
+
+out:
+	if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
+		hw_dbg(hw, "Smartspeed has downgraded the link speed from the maximum advertised\n");
+	return status;
+}
+
+/**
+ *  ixgbe_setup_mac_link_82599 - Set MAC link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Set the link speed in the AUTOC register and restarts link.
+ **/
+static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
+				      ixgbe_link_speed speed,
+				      bool autoneg_wait_to_complete)
+{
+	bool autoneg = false;
+	s32 status;
+	u32 pma_pmd_1g, link_mode, links_reg, i;
+	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+	ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+
+	/* holds the value of AUTOC register at this current point in time */
+	u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	/* holds the cached value of AUTOC register */
+	u32 orig_autoc = 0;
+	/* temporary variable used for comparison purposes */
+	u32 autoc = current_autoc;
+
+	/* Check to see if speed passed in is supported. */
+	status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities,
+						   &autoneg);
+	if (status)
+		return status;
+
+	speed &= link_capabilities;
+
+	if (speed == IXGBE_LINK_SPEED_UNKNOWN)
+		return IXGBE_ERR_LINK_SETUP;
+
+	/* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
+	if (hw->mac.orig_link_settings_stored)
+		orig_autoc = hw->mac.orig_autoc;
+	else
+		orig_autoc = autoc;
+
+	link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+	pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+
+	if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+		/* Set KX4/KX/KR support according to speed requested */
+		autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
+		if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+			if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+				autoc |= IXGBE_AUTOC_KX4_SUPP;
+			if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
+			    (hw->phy.smart_speed_active == false))
+				autoc |= IXGBE_AUTOC_KR_SUPP;
+		}
+		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+			autoc |= IXGBE_AUTOC_KX_SUPP;
+	} else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
+		   (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
+		    link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
+		/* Switch from 1G SFI to 10G SFI if requested */
+		if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
+		    (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
+			autoc &= ~IXGBE_AUTOC_LMS_MASK;
+			autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
+		}
+	} else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
+		   (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
+		/* Switch from 10G SFI to 1G SFI if requested */
+		if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+		    (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
+			autoc &= ~IXGBE_AUTOC_LMS_MASK;
+			if (autoneg)
+				autoc |= IXGBE_AUTOC_LMS_1G_AN;
+			else
+				autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
+		}
+	}
+
+	if (autoc != current_autoc) {
+		/* Restart link */
+		status = hw->mac.ops.prot_autoc_write(hw, autoc, false);
+		if (status)
+			return status;
+
+		/* Only poll for autoneg to complete if specified to do so */
+		if (autoneg_wait_to_complete) {
+			if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+			    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+			    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+				links_reg = 0; /*Just in case Autoneg time=0*/
+				for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+					links_reg =
+					       IXGBE_READ_REG(hw, IXGBE_LINKS);
+					if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+						break;
+					msleep(100);
+				}
+				if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+					status =
+						IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+					hw_dbg(hw, "Autoneg did not complete.\n");
+				}
+			}
+		}
+
+		/* Add delay to filter out noises during initial link setup */
+		msleep(50);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ *  Restarts link on PHY and MAC based on settings passed in.
+ **/
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+					 ixgbe_link_speed speed,
+					 bool autoneg_wait_to_complete)
+{
+	s32 status;
+
+	/* Setup the PHY according to input speed */
+	status = hw->phy.ops.setup_link_speed(hw, speed,
+					      autoneg_wait_to_complete);
+	/* Set up MAC */
+	ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
+
+	return status;
+}
+
+/**
+ *  ixgbe_reset_hw_82599 - Perform hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks
+ *  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ *  reset.
+ **/
+static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
+{
+	ixgbe_link_speed link_speed;
+	s32 status;
+	u32 ctrl, i, autoc, autoc2;
+	u32 curr_lms;
+	bool link_up = false;
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	status = hw->mac.ops.stop_adapter(hw);
+	if (status)
+		return status;
+
+	/* flush pending Tx transactions */
+	ixgbe_clear_tx_pending(hw);
+
+	/* PHY ops must be identified and initialized prior to reset */
+
+	/* Identify PHY and related function pointers */
+	status = hw->phy.ops.init(hw);
+
+	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		return status;
+
+	/* Setup SFP module if there is one present. */
+	if (hw->phy.sfp_setup_needed) {
+		status = hw->mac.ops.setup_sfp(hw);
+		hw->phy.sfp_setup_needed = false;
+	}
+
+	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		return status;
+
+	/* Reset PHY */
+	if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
+		hw->phy.ops.reset(hw);
+
+	/* remember AUTOC from before we reset */
+	curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK;
+
+mac_reset_top:
+	/*
+	 * Issue global reset to the MAC. Needs to be SW reset if link is up.
+	 * If link reset is used when link is up, it might reset the PHY when
+	 * mng is using it.  If link is down or the flag to force full link
+	 * reset is set, then perform link reset.
+	 */
+	ctrl = IXGBE_CTRL_LNK_RST;
+	if (!hw->force_full_reset) {
+		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+		if (link_up)
+			ctrl = IXGBE_CTRL_RST;
+	}
+
+	ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear indicating reset is complete */
+	for (i = 0; i < 10; i++) {
+		udelay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST_MASK))
+			break;
+	}
+
+	if (ctrl & IXGBE_CTRL_RST_MASK) {
+		status = IXGBE_ERR_RESET_FAILED;
+		hw_dbg(hw, "Reset polling failed to complete.\n");
+	}
+
+	msleep(50);
+
+	/*
+	 * Double resets are required for recovery from certain error
+	 * conditions.  Between resets, it is necessary to stall to allow time
+	 * for any pending HW events to complete.
+	 */
+	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+		goto mac_reset_top;
+	}
+
+	/*
+	 * Store the original AUTOC/AUTOC2 values if they have not been
+	 * stored off yet.  Otherwise restore the stored original
+	 * values since the reset operation sets back to defaults.
+	 */
+	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+
+	/* Enable link if disabled in NVM */
+	if (autoc2 & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
+		autoc2 &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+
+	if (hw->mac.orig_link_settings_stored == false) {
+		hw->mac.orig_autoc = autoc;
+		hw->mac.orig_autoc2 = autoc2;
+		hw->mac.orig_link_settings_stored = true;
+	} else {
+
+		/* If MNG FW is running on a multi-speed device that
+		 * doesn't autoneg with out driver support we need to
+		 * leave LMS in the state it was before we MAC reset.
+		 * Likewise if we support WoL we don't want change the
+		 * LMS state either.
+		 */
+		if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) ||
+		    hw->wol_enabled)
+			hw->mac.orig_autoc =
+				(hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
+				curr_lms;
+
+		if (autoc != hw->mac.orig_autoc) {
+			status = hw->mac.ops.prot_autoc_write(hw,
+							hw->mac.orig_autoc,
+							false);
+			if (status)
+				return status;
+		}
+
+		if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
+		    (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
+			autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
+			autoc2 |= (hw->mac.orig_autoc2 &
+				   IXGBE_AUTOC2_UPPER_MASK);
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+		}
+	}
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = 128;
+	hw->mac.ops.init_rx_addrs(hw);
+
+	/* Store the permanent SAN mac address */
+	hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+	/* Add the SAN MAC address to the RAR only if it's a valid address */
+	if (is_valid_ether_addr(hw->mac.san_addr)) {
+		hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+				    hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+		/* Save the SAN MAC RAR index */
+		hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
+
+		/* Reserve the last RAR for the SAN MAC address */
+		hw->mac.num_rar_entries--;
+	}
+
+	/* Store the alternative WWNN/WWPN prefix */
+	hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+				       &hw->mac.wwpn_prefix);
+
+	return status;
+}
+
+/**
+ *  ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
+{
+	int i;
+	u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
+
+	fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
+
+	/*
+	 * Before starting reinitialization process,
+	 * FDIRCMD.CMD must be zero.
+	 */
+	for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
+		if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+		      IXGBE_FDIRCMD_CMD_MASK))
+			break;
+		udelay(10);
+	}
+	if (i >= IXGBE_FDIRCMD_CMD_POLL) {
+		hw_dbg(hw, "Flow Director previous command isn't complete, aborting table re-initialization.\n");
+		return IXGBE_ERR_FDIR_REINIT_FAILED;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
+	IXGBE_WRITE_FLUSH(hw);
+	/*
+	 * 82599 adapters flow director init flow cannot be restarted,
+	 * Workaround 82599 silicon errata by performing the following steps
+	 * before re-writing the FDIRCTRL control register with the same value.
+	 * - write 1 to bit 8 of FDIRCMD register &
+	 * - write 0 to bit 8 of FDIRCMD register
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
+			 IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+			 ~IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	/*
+	 * Clear FDIR Hash register to clear any leftover hashes
+	 * waiting to be programmed.
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00);
+	IXGBE_WRITE_FLUSH(hw);
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll init-done after we write FDIRCTRL register */
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+				   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		usleep_range(1000, 2000);
+	}
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
+		hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
+		return IXGBE_ERR_FDIR_REINIT_FAILED;
+	}
+
+	/* Clear FDIR statistics registers (read to clear) */
+	IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
+	IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
+	IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+	IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+	IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
+ *  @hw: pointer to hardware structure
+ *  @fdirctrl: value to write to flow director control register
+ **/
+static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+	int i;
+
+	/* Prime the keys for hashing */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
+
+	/*
+	 * Poll init-done after we write the register.  Estimated times:
+	 *      10G: PBALLOC = 11b, timing is 60us
+	 *       1G: PBALLOC = 11b, timing is 600us
+	 *     100M: PBALLOC = 11b, timing is 6ms
+	 *
+	 *     Multiple these timings by 4 if under full Rx load
+	 *
+	 * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
+	 * 1 msec per poll time.  If we're at line rate and drop to 100M, then
+	 * this might not finish in our poll time, but we can live with that
+	 * for now.
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+				   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL)
+		hw_dbg(hw, "Flow Director poll time exceeded!\n");
+}
+
+/**
+ *  ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
+ *  @hw: pointer to hardware structure
+ *  @fdirctrl: value to write to flow director control register, initially
+ *             contains just the value of the Rx packet buffer allocation
+ **/
+s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+	/*
+	 * Continue setup of fdirctrl register bits:
+	 *  Move the flexible bytes to use the ethertype - shift 6 words
+	 *  Set the maximum length per hash bucket to 0xA filters
+	 *  Send interrupt when 64 filters are left
+	 */
+	fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+		    (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+		    (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+
+	/* write hashes and fdirctrl register, poll for completion */
+	ixgbe_fdir_enable_82599(hw, fdirctrl);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
+ *  @hw: pointer to hardware structure
+ *  @fdirctrl: value to write to flow director control register, initially
+ *             contains just the value of the Rx packet buffer allocation
+ **/
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+	/*
+	 * Continue setup of fdirctrl register bits:
+	 *  Turn perfect match filtering on
+	 *  Report hash in RSS field of Rx wb descriptor
+	 *  Initialize the drop queue
+	 *  Move the flexible bytes to use the ethertype - shift 6 words
+	 *  Set the maximum length per hash bucket to 0xA filters
+	 *  Send interrupt when 64 (0x4 * 16) filters are left
+	 */
+	fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH |
+		    IXGBE_FDIRCTRL_REPORT_STATUS |
+		    (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) |
+		    (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+		    (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+		    (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+
+	/* write hashes and fdirctrl register, poll for completion */
+	ixgbe_fdir_enable_82599(hw, fdirctrl);
+
+	return 0;
+}
+
+/*
+ * These defines allow us to quickly generate all of the necessary instructions
+ * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
+ * for values 0 through 15
+ */
+#define IXGBE_ATR_COMMON_HASH_KEY \
+		(IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
+#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
+do { \
+	u32 n = (_n); \
+	if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
+		common_hash ^= lo_hash_dword >> n; \
+	else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+		bucket_hash ^= lo_hash_dword >> n; \
+	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
+		sig_hash ^= lo_hash_dword << (16 - n); \
+	if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
+		common_hash ^= hi_hash_dword >> n; \
+	else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+		bucket_hash ^= hi_hash_dword >> n; \
+	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
+		sig_hash ^= hi_hash_dword << (16 - n); \
+} while (0)
+
+/**
+ *  ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
+ *  @stream: input bitstream to compute the hash on
+ *
+ *  This function is almost identical to the function above but contains
+ *  several optomizations such as unwinding all of the loops, letting the
+ *  compiler work out all of the conditional ifs since the keys are static
+ *  defines, and computing two keys at once since the hashed dword stream
+ *  will be the same for both keys.
+ **/
+static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
+					    union ixgbe_atr_hash_dword common)
+{
+	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+	u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
+
+	/* record the flow_vm_vlan bits as they are a key part to the hash */
+	flow_vm_vlan = ntohl(input.dword);
+
+	/* generate common hash dword */
+	hi_hash_dword = ntohl(common.dword);
+
+	/* low dword is word swapped version of common */
+	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+	/* apply flow ID/VM pool/VLAN ID bits to hash words */
+	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+	/* Process bits 0 and 16 */
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
+
+	/*
+	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+	 * delay this because bit 0 of the stream should not be processed
+	 * so we do not add the vlan until after bit 0 was processed
+	 */
+	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+	/* Process remaining 30 bit of the key */
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
+
+	/* combine common_hash result with signature and bucket hashes */
+	bucket_hash ^= common_hash;
+	bucket_hash &= IXGBE_ATR_HASH_MASK;
+
+	sig_hash ^= common_hash << 16;
+	sig_hash &= IXGBE_ATR_HASH_MASK << 16;
+
+	/* return completed signature hash */
+	return sig_hash ^ bucket_hash;
+}
+
+/**
+ *  ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
+ *  @hw: pointer to hardware structure
+ *  @input: unique input dword
+ *  @common: compressed common input dword
+ *  @queue: queue index to direct traffic to
+ **/
+s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_hash_dword input,
+					  union ixgbe_atr_hash_dword common,
+					  u8 queue)
+{
+	u64  fdirhashcmd;
+	u32  fdircmd;
+
+	/*
+	 * Get the flow_type in order to program FDIRCMD properly
+	 * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
+	 */
+	switch (input.formatted.flow_type) {
+	case IXGBE_ATR_FLOW_TYPE_TCPV4:
+	case IXGBE_ATR_FLOW_TYPE_UDPV4:
+	case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+	case IXGBE_ATR_FLOW_TYPE_TCPV6:
+	case IXGBE_ATR_FLOW_TYPE_UDPV6:
+	case IXGBE_ATR_FLOW_TYPE_SCTPV6:
+		break;
+	default:
+		hw_dbg(hw, " Error on flow type input\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	/* configure FDIRCMD register */
+	fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+		  IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+	fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+	fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+
+	/*
+	 * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
+	 * is for FDIRCMD.  Then do a 64-bit register write from FDIRHASH.
+	 */
+	fdirhashcmd = (u64)fdircmd << 32;
+	fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
+	IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
+
+	hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
+
+	return 0;
+}
+
+#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \
+do { \
+	u32 n = (_n); \
+	if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+		bucket_hash ^= lo_hash_dword >> n; \
+	if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+		bucket_hash ^= hi_hash_dword >> n; \
+} while (0)
+
+/**
+ *  ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
+ *  @atr_input: input bitstream to compute the hash on
+ *  @input_mask: mask for the input bitstream
+ *
+ *  This function serves two main purposes.  First it applys the input_mask
+ *  to the atr_input resulting in a cleaned up atr_input data stream.
+ *  Secondly it computes the hash and stores it in the bkt_hash field at
+ *  the end of the input byte stream.  This way it will be available for
+ *  future use without needing to recompute the hash.
+ **/
+void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
+					  union ixgbe_atr_input *input_mask)
+{
+
+	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+	u32 bucket_hash = 0, hi_dword = 0;
+	int i;
+
+	/* Apply masks to input data */
+	for (i = 0; i <= 10; i++)
+		input->dword_stream[i] &= input_mask->dword_stream[i];
+
+	/* record the flow_vm_vlan bits as they are a key part to the hash */
+	flow_vm_vlan = ntohl(input->dword_stream[0]);
+
+	/* generate common hash dword */
+	for (i = 1; i <= 10; i++)
+		hi_dword ^= input->dword_stream[i];
+	hi_hash_dword = ntohl(hi_dword);
+
+	/* low dword is word swapped version of common */
+	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+	/* apply flow ID/VM pool/VLAN ID bits to hash words */
+	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+	/* Process bits 0 and 16 */
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(0);
+
+	/*
+	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+	 * delay this because bit 0 of the stream should not be processed
+	 * so we do not add the vlan until after bit 0 was processed
+	 */
+	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+	/* Process remaining 30 bit of the key */
+	for (i = 1; i <= 15; i++)
+		IXGBE_COMPUTE_BKT_HASH_ITERATION(i);
+
+	/*
+	 * Limit hash to 13 bits since max bucket count is 8K.
+	 * Store result at the end of the input stream.
+	 */
+	input->formatted.bkt_hash = bucket_hash & 0x1FFF;
+}
+
+/**
+ *  ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
+ *  @input_mask: mask to be bit swapped
+ *
+ *  The source and destination port masks for flow director are bit swapped
+ *  in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc.  In order to
+ *  generate a correctly swapped value we need to bit swap the mask and that
+ *  is what is accomplished by this function.
+ **/
+static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
+{
+	u32 mask = ntohs(input_mask->formatted.dst_port);
+
+	mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
+	mask |= ntohs(input_mask->formatted.src_port);
+	mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
+	mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
+	mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
+	return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
+}
+
+/*
+ * These two macros are meant to address the fact that we have registers
+ * that are either all or in part big-endian.  As a result on big-endian
+ * systems we will end up byte swapping the value to little-endian before
+ * it is byte swapped again and written to the hardware in the original
+ * big-endian format.
+ */
+#define IXGBE_STORE_AS_BE32(_value) \
+	(((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
+	 (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
+
+#define IXGBE_WRITE_REG_BE32(a, reg, value) \
+	IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))
+
+#define IXGBE_STORE_AS_BE16(_value) \
+	ntohs(((u16)(_value) >> 8) | ((u16)(_value) << 8))
+
+s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
+				    union ixgbe_atr_input *input_mask)
+{
+	/* mask IPv6 since it is currently not supported */
+	u32 fdirm = IXGBE_FDIRM_DIPv6;
+	u32 fdirtcpm;
+
+	/*
+	 * Program the relevant mask registers.  If src/dst_port or src/dst_addr
+	 * are zero, then assume a full mask for that field.  Also assume that
+	 * a VLAN of 0 is unspecified, so mask that out as well.  L4type
+	 * cannot be masked out in this implementation.
+	 *
+	 * This also assumes IPv4 only.  IPv6 masking isn't supported at this
+	 * point in time.
+	 */
+
+	/* verify bucket hash is cleared on hash generation */
+	if (input_mask->formatted.bkt_hash)
+		hw_dbg(hw, " bucket hash should always be 0 in mask\n");
+
+	/* Program FDIRM and verify partial masks */
+	switch (input_mask->formatted.vm_pool & 0x7F) {
+	case 0x0:
+		fdirm |= IXGBE_FDIRM_POOL;
+	case 0x7F:
+		break;
+	default:
+		hw_dbg(hw, " Error on vm pool mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) {
+	case 0x0:
+		fdirm |= IXGBE_FDIRM_L4P;
+		if (input_mask->formatted.dst_port ||
+		    input_mask->formatted.src_port) {
+			hw_dbg(hw, " Error on src/dst port mask\n");
+			return IXGBE_ERR_CONFIG;
+		}
+	case IXGBE_ATR_L4TYPE_MASK:
+		break;
+	default:
+		hw_dbg(hw, " Error on flow type mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	switch (ntohs(input_mask->formatted.vlan_id) & 0xEFFF) {
+	case 0x0000:
+		/* mask VLAN ID, fall through to mask VLAN priority */
+		fdirm |= IXGBE_FDIRM_VLANID;
+	case 0x0FFF:
+		/* mask VLAN priority */
+		fdirm |= IXGBE_FDIRM_VLANP;
+		break;
+	case 0xE000:
+		/* mask VLAN ID only, fall through */
+		fdirm |= IXGBE_FDIRM_VLANID;
+	case 0xEFFF:
+		/* no VLAN fields masked */
+		break;
+	default:
+		hw_dbg(hw, " Error on VLAN mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	switch (input_mask->formatted.flex_bytes & 0xFFFF) {
+	case 0x0000:
+		/* Mask Flex Bytes, fall through */
+		fdirm |= IXGBE_FDIRM_FLEX;
+	case 0xFFFF:
+		break;
+	default:
+		hw_dbg(hw, " Error on flexible byte mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
+
+	/* store the TCP/UDP port masks, bit reversed from port layout */
+	fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask);
+
+	/* write both the same so that UDP and TCP use the same mask */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+
+	/* store source and destination IP masks (big-enian) */
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
+			     ~input_mask->formatted.src_ip[0]);
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
+			     ~input_mask->formatted.dst_ip[0]);
+
+	return 0;
+}
+
+s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_input *input,
+					  u16 soft_id, u8 queue)
+{
+	u32 fdirport, fdirvlan, fdirhash, fdircmd;
+
+	/* currently IPv6 is not supported, must be programmed with 0 */
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0),
+			     input->formatted.src_ip[0]);
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1),
+			     input->formatted.src_ip[1]);
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2),
+			     input->formatted.src_ip[2]);
+
+	/* record the source address (big-endian) */
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
+
+	/* record the first 32 bits of the destination address (big-endian) */
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
+
+	/* record source and destination port (little-endian)*/
+	fdirport = ntohs(input->formatted.dst_port);
+	fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
+	fdirport |= ntohs(input->formatted.src_port);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
+
+	/* record vlan (little-endian) and flex_bytes(big-endian) */
+	fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
+	fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
+	fdirvlan |= ntohs(input->formatted.vlan_id);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+
+	/* configure FDIRHASH register */
+	fdirhash = input->formatted.bkt_hash;
+	fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+
+	/*
+	 * flush all previous writes to make certain registers are
+	 * programmed prior to issuing the command
+	 */
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* configure FDIRCMD register */
+	fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+		  IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+	if (queue == IXGBE_FDIR_DROP_QUEUE)
+		fdircmd |= IXGBE_FDIRCMD_DROP;
+	fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+	fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+	fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+
+	return 0;
+}
+
+s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_input *input,
+					  u16 soft_id)
+{
+	u32 fdirhash;
+	u32 fdircmd = 0;
+	u32 retry_count;
+	s32 err = 0;
+
+	/* configure FDIRHASH register */
+	fdirhash = input->formatted.bkt_hash;
+	fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+
+	/* flush hash to HW */
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Query if filter is present */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
+
+	for (retry_count = 10; retry_count; retry_count--) {
+		/* allow 10us for query to process */
+		udelay(10);
+		/* verify query completed successfully */
+		fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
+		if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK))
+			break;
+	}
+
+	if (!retry_count)
+		err = IXGBE_ERR_FDIR_REINIT_FAILED;
+
+	/* if filter exists in hardware then remove it */
+	if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+		IXGBE_WRITE_FLUSH(hw);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+				IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
+	}
+
+	return err;
+}
+
+/**
+ *  ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: analog register to read
+ *  @val: read value
+ *
+ *  Performs read operation to Omer analog register specified.
+ **/
+static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+	u32  core_ctl;
+
+	IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD |
+			(reg << 8));
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(10);
+	core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL);
+	*val = (u8)core_ctl;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: atlas register to write
+ *  @val: value to write
+ *
+ *  Performs write operation to Omer analog register specified.
+ **/
+static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+	u32  core_ctl;
+
+	core_ctl = (reg << 8) | val;
+	IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(10);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function
+ *  and the generation start_hw function.
+ *  Then performs revision-specific operations, if any.
+ **/
+static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
+{
+	s32 ret_val = 0;
+
+	ret_val = ixgbe_start_hw_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = ixgbe_start_hw_gen2(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* We need to run link autotry after the driver loads */
+	hw->mac.autotry_restart = true;
+
+	if (ret_val)
+		return ret_val;
+
+	return ixgbe_verify_fw_version_82599(hw);
+}
+
+/**
+ *  ixgbe_identify_phy_82599 - Get physical layer module
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the physical layer module found on the current adapter.
+ *  If PHY already detected, maintains current PHY type in hw struct,
+ *  otherwise executes the PHY detection routine.
+ **/
+static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
+{
+	s32 status;
+
+	/* Detect PHY if not unknown - returns success if already detected. */
+	status = ixgbe_identify_phy_generic(hw);
+	if (status) {
+		/* 82599 10GBASE-T requires an external PHY */
+		if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
+			return status;
+		status = ixgbe_identify_module_generic(hw);
+	}
+
+	/* Set PHY type none if no PHY detected */
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		hw->phy.type = ixgbe_phy_none;
+		status = 0;
+	}
+
+	/* Return error if SFP module has been detected but is not supported */
+	if (hw->phy.type == ixgbe_phy_sfp_unsupported)
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+	return status;
+}
+
+/**
+ *  ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
+ *  @hw: pointer to hardware structure
+ *  @regval: register value to write to RXCTRL
+ *
+ *  Enables the Rx DMA unit for 82599
+ **/
+static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
+{
+	/*
+	 * Workaround for 82599 silicon errata when enabling the Rx datapath.
+	 * If traffic is incoming before we enable the Rx unit, it could hang
+	 * the Rx DMA unit.  Therefore, make sure the security engine is
+	 * completely disabled prior to enabling the Rx unit.
+	 */
+	hw->mac.ops.disable_rx_buff(hw);
+
+	if (regval & IXGBE_RXCTRL_RXEN)
+		hw->mac.ops.enable_rx(hw);
+	else
+		hw->mac.ops.disable_rx(hw);
+
+	hw->mac.ops.enable_rx_buff(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_verify_fw_version_82599 - verify fw version for 82599
+ *  @hw: pointer to hardware structure
+ *
+ *  Verifies that installed the firmware version is 0.6 or higher
+ *  for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
+ *
+ *  Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
+ *  if the FW version is not supported.
+ **/
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_EEPROM_VERSION;
+	u16 fw_offset, fw_ptp_cfg_offset;
+	u16 offset;
+	u16 fw_version = 0;
+
+	/* firmware check is only necessary for SFI devices */
+	if (hw->phy.media_type != ixgbe_media_type_fiber)
+		return 0;
+
+	/* get the offset to the Firmware Module block */
+	offset = IXGBE_FW_PTR;
+	if (hw->eeprom.ops.read(hw, offset, &fw_offset))
+		goto fw_version_err;
+
+	if (fw_offset == 0 || fw_offset == 0xFFFF)
+		return IXGBE_ERR_EEPROM_VERSION;
+
+	/* get the offset to the Pass Through Patch Configuration block */
+	offset = fw_offset + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR;
+	if (hw->eeprom.ops.read(hw, offset, &fw_ptp_cfg_offset))
+		goto fw_version_err;
+
+	if (fw_ptp_cfg_offset == 0 || fw_ptp_cfg_offset == 0xFFFF)
+		return IXGBE_ERR_EEPROM_VERSION;
+
+	/* get the firmware version */
+	offset = fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4;
+	if (hw->eeprom.ops.read(hw, offset, &fw_version))
+		goto fw_version_err;
+
+	if (fw_version > 0x5)
+		status = 0;
+
+	return status;
+
+fw_version_err:
+	hw_err(hw, "eeprom read at offset %d failed\n", offset);
+	return IXGBE_ERR_EEPROM_VERSION;
+}
+
+/**
+ *  ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns true if the LESM FW module is present and enabled. Otherwise
+ *  returns false. Smart Speed must be disabled if LESM FW module is enabled.
+ **/
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
+{
+	u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
+	s32 status;
+
+	/* get the offset to the Firmware Module block */
+	status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+	if (status || fw_offset == 0 || fw_offset == 0xFFFF)
+		return false;
+
+	/* get the offset to the LESM Parameters block */
+	status = hw->eeprom.ops.read(hw, (fw_offset +
+				     IXGBE_FW_LESM_PARAMETERS_PTR),
+				     &fw_lesm_param_offset);
+
+	if (status ||
+	    fw_lesm_param_offset == 0 || fw_lesm_param_offset == 0xFFFF)
+		return false;
+
+	/* get the lesm state word */
+	status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
+				     IXGBE_FW_LESM_STATE_1),
+				     &fw_lesm_state);
+
+	if (!status && (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
+		return true;
+
+	return false;
+}
+
+/**
+ *  ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
+ *  fastest available method
+ *
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in EEPROM to read
+ *  @words: number of words
+ *  @data: word(s) read from the EEPROM
+ *
+ *  Retrieves 16 bit word(s) read from EEPROM
+ **/
+static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+					  u16 words, u16 *data)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+
+	/* If EEPROM is detected and can be addressed using 14 bits,
+	 * use EERD otherwise use bit bang
+	 */
+	if (eeprom->type == ixgbe_eeprom_spi &&
+	    offset + (words - 1) <= IXGBE_EERD_MAX_ADDR)
+		return ixgbe_read_eerd_buffer_generic(hw, offset, words, data);
+
+	return ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, words,
+							 data);
+}
+
+/**
+ *  ixgbe_read_eeprom_82599 - Read EEPROM word using
+ *  fastest available method
+ *
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM
+ **/
+static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+				   u16 offset, u16 *data)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+
+	/*
+	 * If EEPROM is detected and can be addressed using 14 bits,
+	 * use EERD otherwise use bit bang
+	 */
+	if (eeprom->type == ixgbe_eeprom_spi && offset <= IXGBE_EERD_MAX_ADDR)
+		return ixgbe_read_eerd_generic(hw, offset, data);
+
+	return ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
+}
+
+/**
+ * ixgbe_reset_pipeline_82599 - perform pipeline reset
+ *
+ * @hw: pointer to hardware structure
+ *
+ * Reset pipeline by asserting Restart_AN together with LMS change to ensure
+ * full pipeline reset.  Note - We must hold the SW/FW semaphore before writing
+ * to AUTOC, so this function assumes the semaphore is held.
+ **/
+static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
+{
+	s32 ret_val;
+	u32 anlp1_reg = 0;
+	u32 i, autoc_reg, autoc2_reg;
+
+	/* Enable link if disabled in NVM */
+	autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	if (autoc2_reg & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
+		autoc2_reg &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+
+	/* Write AUTOC register with toggled LMS[2] bit and Restart_AN */
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
+			autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT));
+
+	/* Wait for AN to leave state 0 */
+	for (i = 0; i < 10; i++) {
+		usleep_range(4000, 8000);
+		anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+		if (anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)
+			break;
+	}
+
+	if (!(anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)) {
+		hw_dbg(hw, "auto negotiation not completed\n");
+		ret_val = IXGBE_ERR_RESET_FAILED;
+		goto reset_pipeline_out;
+	}
+
+	ret_val = 0;
+
+reset_pipeline_out:
+	/* Write AUTOC register with original LMS field and Restart_AN */
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+				     u8 dev_addr, u8 *data)
+{
+	u32 esdp;
+	s32 status;
+	s32 timeout = 200;
+
+	if (hw->phy.qsfp_shared_i2c_bus == true) {
+		/* Acquire I2C bus ownership. */
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		esdp |= IXGBE_ESDP_SDP0;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_FLUSH(hw);
+
+		while (timeout) {
+			esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+			if (esdp & IXGBE_ESDP_SDP1)
+				break;
+
+			usleep_range(5000, 10000);
+			timeout--;
+		}
+
+		if (!timeout) {
+			hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
+			status = IXGBE_ERR_I2C;
+			goto release_i2c_access;
+		}
+	}
+
+	status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+	if (hw->phy.qsfp_shared_i2c_bus == true) {
+		/* Release I2C bus ownership. */
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		esdp &= ~IXGBE_ESDP_SDP0;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+				      u8 dev_addr, u8 data)
+{
+	u32 esdp;
+	s32 status;
+	s32 timeout = 200;
+
+	if (hw->phy.qsfp_shared_i2c_bus == true) {
+		/* Acquire I2C bus ownership. */
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		esdp |= IXGBE_ESDP_SDP0;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_FLUSH(hw);
+
+		while (timeout) {
+			esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+			if (esdp & IXGBE_ESDP_SDP1)
+				break;
+
+			usleep_range(5000, 10000);
+			timeout--;
+		}
+
+		if (!timeout) {
+			hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
+			status = IXGBE_ERR_I2C;
+			goto release_i2c_access;
+		}
+	}
+
+	status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+	if (hw->phy.qsfp_shared_i2c_bus == true) {
+		/* Release I2C bus ownership. */
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		esdp &= ~IXGBE_ESDP_SDP0;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+
+	return status;
+}
+
+static struct ixgbe_mac_operations mac_ops_82599 = {
+	.init_hw                = &ixgbe_init_hw_generic,
+	.reset_hw               = &ixgbe_reset_hw_82599,
+	.start_hw               = &ixgbe_start_hw_82599,
+	.clear_hw_cntrs         = &ixgbe_clear_hw_cntrs_generic,
+	.get_media_type         = &ixgbe_get_media_type_82599,
+	.enable_rx_dma          = &ixgbe_enable_rx_dma_82599,
+	.disable_rx_buff	= &ixgbe_disable_rx_buff_generic,
+	.enable_rx_buff		= &ixgbe_enable_rx_buff_generic,
+	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
+	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,
+	.get_device_caps        = &ixgbe_get_device_caps_generic,
+	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_generic,
+	.stop_adapter           = &ixgbe_stop_adapter_generic,
+	.get_bus_info           = &ixgbe_get_bus_info_generic,
+	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
+	.read_analog_reg8       = &ixgbe_read_analog_reg8_82599,
+	.write_analog_reg8      = &ixgbe_write_analog_reg8_82599,
+	.stop_link_on_d3	= &ixgbe_stop_mac_link_on_d3_82599,
+	.setup_link             = &ixgbe_setup_mac_link_82599,
+	.set_rxpba		= &ixgbe_set_rxpba_generic,
+	.check_link             = &ixgbe_check_mac_link_generic,
+	.get_link_capabilities  = &ixgbe_get_link_capabilities_82599,
+	.led_on                 = &ixgbe_led_on_generic,
+	.led_off                = &ixgbe_led_off_generic,
+	.blink_led_start        = &ixgbe_blink_led_start_generic,
+	.blink_led_stop         = &ixgbe_blink_led_stop_generic,
+	.set_rar                = &ixgbe_set_rar_generic,
+	.clear_rar              = &ixgbe_clear_rar_generic,
+	.set_vmdq               = &ixgbe_set_vmdq_generic,
+	.set_vmdq_san_mac	= &ixgbe_set_vmdq_san_mac_generic,
+	.clear_vmdq             = &ixgbe_clear_vmdq_generic,
+	.init_rx_addrs          = &ixgbe_init_rx_addrs_generic,
+	.update_mc_addr_list    = &ixgbe_update_mc_addr_list_generic,
+	.enable_mc              = &ixgbe_enable_mc_generic,
+	.disable_mc             = &ixgbe_disable_mc_generic,
+	.clear_vfta             = &ixgbe_clear_vfta_generic,
+	.set_vfta               = &ixgbe_set_vfta_generic,
+	.fc_enable              = &ixgbe_fc_enable_generic,
+	.set_fw_drv_ver         = &ixgbe_set_fw_drv_ver_generic,
+	.init_uta_tables        = &ixgbe_init_uta_tables_generic,
+	.setup_sfp              = &ixgbe_setup_sfp_modules_82599,
+	.set_mac_anti_spoofing  = &ixgbe_set_mac_anti_spoofing,
+	.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
+	.acquire_swfw_sync      = &ixgbe_acquire_swfw_sync,
+	.release_swfw_sync      = &ixgbe_release_swfw_sync,
+	.get_thermal_sensor_data = &ixgbe_get_thermal_sensor_data_generic,
+	.init_thermal_sensor_thresh = &ixgbe_init_thermal_sensor_thresh_generic,
+	.prot_autoc_read	= &prot_autoc_read_82599,
+	.prot_autoc_write	= &prot_autoc_write_82599,
+	.enable_rx		= &ixgbe_enable_rx_generic,
+	.disable_rx		= &ixgbe_disable_rx_generic,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
+	.init_params		= &ixgbe_init_eeprom_params_generic,
+	.read			= &ixgbe_read_eeprom_82599,
+	.read_buffer		= &ixgbe_read_eeprom_buffer_82599,
+	.write			= &ixgbe_write_eeprom_generic,
+	.write_buffer		= &ixgbe_write_eeprom_buffer_bit_bang_generic,
+	.calc_checksum		= &ixgbe_calc_eeprom_checksum_generic,
+	.validate_checksum	= &ixgbe_validate_eeprom_checksum_generic,
+	.update_checksum	= &ixgbe_update_eeprom_checksum_generic,
+};
+
+static struct ixgbe_phy_operations phy_ops_82599 = {
+	.identify		= &ixgbe_identify_phy_82599,
+	.identify_sfp		= &ixgbe_identify_module_generic,
+	.init			= &ixgbe_init_phy_ops_82599,
+	.reset			= &ixgbe_reset_phy_generic,
+	.read_reg		= &ixgbe_read_phy_reg_generic,
+	.write_reg		= &ixgbe_write_phy_reg_generic,
+	.setup_link		= &ixgbe_setup_phy_link_generic,
+	.setup_link_speed	= &ixgbe_setup_phy_link_speed_generic,
+	.read_i2c_byte		= &ixgbe_read_i2c_byte_generic,
+	.write_i2c_byte		= &ixgbe_write_i2c_byte_generic,
+	.read_i2c_sff8472	= &ixgbe_read_i2c_sff8472_generic,
+	.read_i2c_eeprom	= &ixgbe_read_i2c_eeprom_generic,
+	.write_i2c_eeprom	= &ixgbe_write_i2c_eeprom_generic,
+	.check_overtemp		= &ixgbe_tn_check_overtemp,
+};
+
+struct ixgbe_info ixgbe_82599_info = {
+	.mac                    = ixgbe_mac_82599EB,
+	.get_invariants         = &ixgbe_get_invariants_82599,
+	.mac_ops                = &mac_ops_82599,
+	.eeprom_ops             = &eeprom_ops_82599,
+	.phy_ops                = &phy_ops_82599,
+	.mbx_ops                = &mbx_ops_generic,
+};
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
new file mode 100644
index 000000000..06d8f3cfa
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -0,0 +1,3900 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/netdevice.h>
+
+#include "ixgbe.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw);
+static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
+static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+					u16 count);
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count);
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
+
+static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
+static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
+static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					     u16 words, u16 *data);
+static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					     u16 words, u16 *data);
+static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+						 u16 offset);
+static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw);
+
+/**
+ *  ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow
+ *  control
+ *  @hw: pointer to hardware structure
+ *
+ *  There are several phys that do not support autoneg flow control. This
+ *  function check the device id to see if the associated phy supports
+ *  autoneg flow control.
+ **/
+bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
+{
+	bool supported = false;
+	ixgbe_link_speed speed;
+	bool link_up;
+
+	switch (hw->phy.media_type) {
+	case ixgbe_media_type_fiber:
+		hw->mac.ops.check_link(hw, &speed, &link_up, false);
+		/* if link is down, assume supported */
+		if (link_up)
+			supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+				true : false;
+		else
+			supported = true;
+		break;
+	case ixgbe_media_type_backplane:
+		supported = true;
+		break;
+	case ixgbe_media_type_copper:
+		/* only some copper devices support flow control autoneg */
+		switch (hw->device_id) {
+		case IXGBE_DEV_ID_82599_T3_LOM:
+		case IXGBE_DEV_ID_X540T:
+		case IXGBE_DEV_ID_X540T1:
+			supported = true;
+			break;
+		default:
+			break;
+		}
+	default:
+		break;
+	}
+
+	return supported;
+}
+
+/**
+ *  ixgbe_setup_fc - Set up flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Called at init time to set up flow control.
+ **/
+static s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
+{
+	s32 ret_val = 0;
+	u32 reg = 0, reg_bp = 0;
+	u16 reg_cu = 0;
+	bool locked = false;
+
+	/*
+	 * Validate the requested mode.  Strict IEEE mode does not allow
+	 * ixgbe_fc_rx_pause because it will cause us to fail at UNH.
+	 */
+	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
+		hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
+	}
+
+	/*
+	 * 10gig parts do not have a word in the EEPROM to determine the
+	 * default flow control setting, so we explicitly set it to full.
+	 */
+	if (hw->fc.requested_mode == ixgbe_fc_default)
+		hw->fc.requested_mode = ixgbe_fc_full;
+
+	/*
+	 * Set up the 1G and 10G flow control advertisement registers so the
+	 * HW will be able to do fc autoneg once the cable is plugged in.  If
+	 * we link at 10G, the 1G advertisement is harmless and vice versa.
+	 */
+	switch (hw->phy.media_type) {
+	case ixgbe_media_type_backplane:
+		/* some MAC's need RMW protection on AUTOC */
+		ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &reg_bp);
+		if (ret_val)
+			return ret_val;
+
+		/* only backplane uses autoc so fall though */
+	case ixgbe_media_type_fiber:
+		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+
+		break;
+	case ixgbe_media_type_copper:
+		hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+					MDIO_MMD_AN, &reg_cu);
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * The possible values of fc.requested_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *    we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.requested_mode) {
+	case ixgbe_fc_none:
+		/* Flow control completely disabled by software override. */
+		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+		if (hw->phy.media_type == ixgbe_media_type_backplane)
+			reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE |
+				    IXGBE_AUTOC_ASM_PAUSE);
+		else if (hw->phy.media_type == ixgbe_media_type_copper)
+			reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		reg |= IXGBE_PCS1GANA_ASM_PAUSE;
+		reg &= ~IXGBE_PCS1GANA_SYM_PAUSE;
+		if (hw->phy.media_type == ixgbe_media_type_backplane) {
+			reg_bp |= IXGBE_AUTOC_ASM_PAUSE;
+			reg_bp &= ~IXGBE_AUTOC_SYM_PAUSE;
+		} else if (hw->phy.media_type == ixgbe_media_type_copper) {
+			reg_cu |= IXGBE_TAF_ASM_PAUSE;
+			reg_cu &= ~IXGBE_TAF_SYM_PAUSE;
+		}
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE, as such we fall
+		 * through to the fc_full statement.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+	case ixgbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		reg |= IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE;
+		if (hw->phy.media_type == ixgbe_media_type_backplane)
+			reg_bp |= IXGBE_AUTOC_SYM_PAUSE |
+				  IXGBE_AUTOC_ASM_PAUSE;
+		else if (hw->phy.media_type == ixgbe_media_type_copper)
+			reg_cu |= IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE;
+		break;
+	default:
+		hw_dbg(hw, "Flow control param set incorrectly\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	if (hw->mac.type != ixgbe_mac_X540) {
+		/*
+		 * Enable auto-negotiation between the MAC & PHY;
+		 * the MAC will advertise clause 37 flow control.
+		 */
+		IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
+		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
+
+		/* Disable AN timeout */
+		if (hw->fc.strict_ieee)
+			reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
+
+		IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
+		hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
+	}
+
+	/*
+	 * AUTOC restart handles negotiation of 1G and 10G on backplane
+	 * and copper. There is no need to set the PCS1GCTL register.
+	 *
+	 */
+	if (hw->phy.media_type == ixgbe_media_type_backplane) {
+		/* Need the SW/FW semaphore around AUTOC writes if 82599 and
+		 * LESM is on, likewise reset_pipeline requries the lock as
+		 * it also writes AUTOC.
+		 */
+		ret_val = hw->mac.ops.prot_autoc_write(hw, reg_bp, locked);
+		if (ret_val)
+			return ret_val;
+
+	} else if ((hw->phy.media_type == ixgbe_media_type_copper) &&
+		   ixgbe_device_supports_autoneg_fc(hw)) {
+		hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
+				      MDIO_MMD_AN, reg_cu);
+	}
+
+	hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg);
+	return ret_val;
+}
+
+/**
+ *  ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware by filling the bus info structure and media type, clears
+ *  all on chip counters, initializes receive address registers, multicast
+ *  table, VLAN filter table, calls routine to set up link and flow control
+ *  settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
+{
+	s32 ret_val;
+	u32 ctrl_ext;
+
+	/* Set the media type */
+	hw->phy.media_type = hw->mac.ops.get_media_type(hw);
+
+	/* Identify the PHY */
+	hw->phy.ops.identify(hw);
+
+	/* Clear the VLAN filter table */
+	hw->mac.ops.clear_vfta(hw);
+
+	/* Clear statistics registers */
+	hw->mac.ops.clear_hw_cntrs(hw);
+
+	/* Set No Snoop Disable */
+	ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+	ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Setup flow control */
+	ret_val = ixgbe_setup_fc(hw);
+	if (!ret_val)
+		return 0;
+
+	/* Clear adapter stopped flag */
+	hw->adapter_stopped = false;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_start_hw_gen2 - Init sequence for common device family
+ *  @hw: pointer to hw structure
+ *
+ * Performs the init sequence common to the second generation
+ * of 10 GbE devices.
+ * Devices in the second generation:
+ *     82599
+ *     X540
+ **/
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
+{
+	u32 i;
+
+	/* Clear the rate limiters */
+	for (i = 0; i < hw->mac.max_tx_queues; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
+		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
+	}
+	IXGBE_WRITE_FLUSH(hw);
+
+#ifndef CONFIG_SPARC
+	/* Disable relaxed ordering */
+	for (i = 0; i < hw->mac.max_tx_queues; i++) {
+		u32 regval;
+
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+	}
+
+	for (i = 0; i < hw->mac.max_rx_queues; i++) {
+		u32 regval;
+
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+	}
+#endif
+	return 0;
+}
+
+/**
+ *  ixgbe_init_hw_generic - Generic hardware initialization
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the hardware by resetting the hardware, filling the bus info
+ *  structure and media type, clears all on chip counters, initializes receive
+ *  address registers, multicast table, VLAN filter table, calls routine to set
+ *  up link and flow control settings, and leaves transmit and receive units
+ *  disabled and uninitialized
+ **/
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
+{
+	s32 status;
+
+	/* Reset the hardware */
+	status = hw->mac.ops.reset_hw(hw);
+
+	if (status == 0) {
+		/* Start the HW */
+		status = hw->mac.ops.start_hw(hw);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears all hardware statistics counters by reading them from the hardware
+ *  Statistics counters are clear on read.
+ **/
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
+{
+	u16 i = 0;
+
+	IXGBE_READ_REG(hw, IXGBE_CRCERRS);
+	IXGBE_READ_REG(hw, IXGBE_ILLERRC);
+	IXGBE_READ_REG(hw, IXGBE_ERRBC);
+	IXGBE_READ_REG(hw, IXGBE_MSPDC);
+	for (i = 0; i < 8; i++)
+		IXGBE_READ_REG(hw, IXGBE_MPC(i));
+
+	IXGBE_READ_REG(hw, IXGBE_MLFC);
+	IXGBE_READ_REG(hw, IXGBE_MRFC);
+	IXGBE_READ_REG(hw, IXGBE_RLEC);
+	IXGBE_READ_REG(hw, IXGBE_LXONTXC);
+	IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
+	if (hw->mac.type >= ixgbe_mac_82599EB) {
+		IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
+		IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
+	} else {
+		IXGBE_READ_REG(hw, IXGBE_LXONRXC);
+		IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
+	}
+
+	for (i = 0; i < 8; i++) {
+		IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
+		IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
+		if (hw->mac.type >= ixgbe_mac_82599EB) {
+			IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
+			IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
+		} else {
+			IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
+			IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
+		}
+	}
+	if (hw->mac.type >= ixgbe_mac_82599EB)
+		for (i = 0; i < 8; i++)
+			IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i));
+	IXGBE_READ_REG(hw, IXGBE_PRC64);
+	IXGBE_READ_REG(hw, IXGBE_PRC127);
+	IXGBE_READ_REG(hw, IXGBE_PRC255);
+	IXGBE_READ_REG(hw, IXGBE_PRC511);
+	IXGBE_READ_REG(hw, IXGBE_PRC1023);
+	IXGBE_READ_REG(hw, IXGBE_PRC1522);
+	IXGBE_READ_REG(hw, IXGBE_GPRC);
+	IXGBE_READ_REG(hw, IXGBE_BPRC);
+	IXGBE_READ_REG(hw, IXGBE_MPRC);
+	IXGBE_READ_REG(hw, IXGBE_GPTC);
+	IXGBE_READ_REG(hw, IXGBE_GORCL);
+	IXGBE_READ_REG(hw, IXGBE_GORCH);
+	IXGBE_READ_REG(hw, IXGBE_GOTCL);
+	IXGBE_READ_REG(hw, IXGBE_GOTCH);
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		for (i = 0; i < 8; i++)
+			IXGBE_READ_REG(hw, IXGBE_RNBC(i));
+	IXGBE_READ_REG(hw, IXGBE_RUC);
+	IXGBE_READ_REG(hw, IXGBE_RFC);
+	IXGBE_READ_REG(hw, IXGBE_ROC);
+	IXGBE_READ_REG(hw, IXGBE_RJC);
+	IXGBE_READ_REG(hw, IXGBE_MNGPRC);
+	IXGBE_READ_REG(hw, IXGBE_MNGPDC);
+	IXGBE_READ_REG(hw, IXGBE_MNGPTC);
+	IXGBE_READ_REG(hw, IXGBE_TORL);
+	IXGBE_READ_REG(hw, IXGBE_TORH);
+	IXGBE_READ_REG(hw, IXGBE_TPR);
+	IXGBE_READ_REG(hw, IXGBE_TPT);
+	IXGBE_READ_REG(hw, IXGBE_PTC64);
+	IXGBE_READ_REG(hw, IXGBE_PTC127);
+	IXGBE_READ_REG(hw, IXGBE_PTC255);
+	IXGBE_READ_REG(hw, IXGBE_PTC511);
+	IXGBE_READ_REG(hw, IXGBE_PTC1023);
+	IXGBE_READ_REG(hw, IXGBE_PTC1522);
+	IXGBE_READ_REG(hw, IXGBE_MPTC);
+	IXGBE_READ_REG(hw, IXGBE_BPTC);
+	for (i = 0; i < 16; i++) {
+		IXGBE_READ_REG(hw, IXGBE_QPRC(i));
+		IXGBE_READ_REG(hw, IXGBE_QPTC(i));
+		if (hw->mac.type >= ixgbe_mac_82599EB) {
+			IXGBE_READ_REG(hw, IXGBE_QBRC_L(i));
+			IXGBE_READ_REG(hw, IXGBE_QBRC_H(i));
+			IXGBE_READ_REG(hw, IXGBE_QBTC_L(i));
+			IXGBE_READ_REG(hw, IXGBE_QBTC_H(i));
+			IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
+		} else {
+			IXGBE_READ_REG(hw, IXGBE_QBRC(i));
+			IXGBE_READ_REG(hw, IXGBE_QBTC(i));
+		}
+	}
+
+	if (hw->mac.type == ixgbe_mac_X540) {
+		if (hw->phy.id == 0)
+			hw->phy.ops.identify(hw);
+		hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECL, MDIO_MMD_PCS, &i);
+		hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECH, MDIO_MMD_PCS, &i);
+		hw->phy.ops.read_reg(hw, IXGBE_LDPCECL, MDIO_MMD_PCS, &i);
+		hw->phy.ops.read_reg(hw, IXGBE_LDPCECH, MDIO_MMD_PCS, &i);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_pba_string_generic - Reads part number string from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @pba_num: stores the part number string from the EEPROM
+ *  @pba_num_size: part number string buffer length
+ *
+ *  Reads the part number string from the EEPROM.
+ **/
+s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
+				  u32 pba_num_size)
+{
+	s32 ret_val;
+	u16 data;
+	u16 pba_ptr;
+	u16 offset;
+	u16 length;
+
+	if (pba_num == NULL) {
+		hw_dbg(hw, "PBA string buffer was null\n");
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
+	if (ret_val) {
+		hw_dbg(hw, "NVM Read Error\n");
+		return ret_val;
+	}
+
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr);
+	if (ret_val) {
+		hw_dbg(hw, "NVM Read Error\n");
+		return ret_val;
+	}
+
+	/*
+	 * if data is not ptr guard the PBA must be in legacy format which
+	 * means pba_ptr is actually our second data word for the PBA number
+	 * and we can decode it into an ascii string
+	 */
+	if (data != IXGBE_PBANUM_PTR_GUARD) {
+		hw_dbg(hw, "NVM PBA number is not stored as string\n");
+
+		/* we will need 11 characters to store the PBA */
+		if (pba_num_size < 11) {
+			hw_dbg(hw, "PBA string buffer too small\n");
+			return IXGBE_ERR_NO_SPACE;
+		}
+
+		/* extract hex string from data and pba_ptr */
+		pba_num[0] = (data >> 12) & 0xF;
+		pba_num[1] = (data >> 8) & 0xF;
+		pba_num[2] = (data >> 4) & 0xF;
+		pba_num[3] = data & 0xF;
+		pba_num[4] = (pba_ptr >> 12) & 0xF;
+		pba_num[5] = (pba_ptr >> 8) & 0xF;
+		pba_num[6] = '-';
+		pba_num[7] = 0;
+		pba_num[8] = (pba_ptr >> 4) & 0xF;
+		pba_num[9] = pba_ptr & 0xF;
+
+		/* put a null character on the end of our string */
+		pba_num[10] = '\0';
+
+		/* switch all the data but the '-' to hex char */
+		for (offset = 0; offset < 10; offset++) {
+			if (pba_num[offset] < 0xA)
+				pba_num[offset] += '0';
+			else if (pba_num[offset] < 0x10)
+				pba_num[offset] += 'A' - 0xA;
+		}
+
+		return 0;
+	}
+
+	ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length);
+	if (ret_val) {
+		hw_dbg(hw, "NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		hw_dbg(hw, "NVM PBA number section invalid length\n");
+		return IXGBE_ERR_PBA_SECTION;
+	}
+
+	/* check if pba_num buffer is big enough */
+	if (pba_num_size  < (((u32)length * 2) - 1)) {
+		hw_dbg(hw, "PBA string buffer too small\n");
+		return IXGBE_ERR_NO_SPACE;
+	}
+
+	/* trim pba length from start of string */
+	pba_ptr++;
+	length--;
+
+	for (offset = 0; offset < length; offset++) {
+		ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data);
+		if (ret_val) {
+			hw_dbg(hw, "NVM Read Error\n");
+			return ret_val;
+		}
+		pba_num[offset * 2] = (u8)(data >> 8);
+		pba_num[(offset * 2) + 1] = (u8)(data & 0xFF);
+	}
+	pba_num[offset * 2] = '\0';
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_mac_addr_generic - Generic get MAC address
+ *  @hw: pointer to hardware structure
+ *  @mac_addr: Adapter MAC address
+ *
+ *  Reads the adapter's MAC address from first Receive Address Register (RAR0)
+ *  A reset of the adapter must be performed prior to calling this function
+ *  in order for the MAC address to have been loaded from the EEPROM into RAR0
+ **/
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0));
+	rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0));
+
+	for (i = 0; i < 4; i++)
+		mac_addr[i] = (u8)(rar_low >> (i*8));
+
+	for (i = 0; i < 2; i++)
+		mac_addr[i+4] = (u8)(rar_high >> (i*8));
+
+	return 0;
+}
+
+enum ixgbe_bus_width ixgbe_convert_bus_width(u16 link_status)
+{
+	switch (link_status & IXGBE_PCI_LINK_WIDTH) {
+	case IXGBE_PCI_LINK_WIDTH_1:
+		return ixgbe_bus_width_pcie_x1;
+	case IXGBE_PCI_LINK_WIDTH_2:
+		return ixgbe_bus_width_pcie_x2;
+	case IXGBE_PCI_LINK_WIDTH_4:
+		return ixgbe_bus_width_pcie_x4;
+	case IXGBE_PCI_LINK_WIDTH_8:
+		return ixgbe_bus_width_pcie_x8;
+	default:
+		return ixgbe_bus_width_unknown;
+	}
+}
+
+enum ixgbe_bus_speed ixgbe_convert_bus_speed(u16 link_status)
+{
+	switch (link_status & IXGBE_PCI_LINK_SPEED) {
+	case IXGBE_PCI_LINK_SPEED_2500:
+		return ixgbe_bus_speed_2500;
+	case IXGBE_PCI_LINK_SPEED_5000:
+		return ixgbe_bus_speed_5000;
+	case IXGBE_PCI_LINK_SPEED_8000:
+		return ixgbe_bus_speed_8000;
+	default:
+		return ixgbe_bus_speed_unknown;
+	}
+}
+
+/**
+ *  ixgbe_get_bus_info_generic - Generic set PCI bus info
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ **/
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
+{
+	u16 link_status;
+
+	hw->bus.type = ixgbe_bus_type_pci_express;
+
+	/* Get the negotiated link width and speed from PCI config space */
+	link_status = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_LINK_STATUS);
+
+	hw->bus.width = ixgbe_convert_bus_width(link_status);
+	hw->bus.speed = ixgbe_convert_bus_speed(link_status);
+
+	hw->mac.ops.set_lan_id(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ *  @hw: pointer to the HW structure
+ *
+ *  Determines the LAN function id by reading memory-mapped registers
+ *  and swaps the port value if requested.
+ **/
+void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
+{
+	struct ixgbe_bus_info *bus = &hw->bus;
+	u32 reg;
+
+	reg = IXGBE_READ_REG(hw, IXGBE_STATUS);
+	bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT;
+	bus->lan_id = bus->func;
+
+	/* check for a port swap */
+	reg = IXGBE_READ_REG(hw, IXGBE_FACTPS);
+	if (reg & IXGBE_FACTPS_LFS)
+		bus->func ^= 0x1;
+}
+
+/**
+ *  ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ *  disables transmit and receive units. The adapter_stopped flag is used by
+ *  the shared code and drivers to determine if the adapter is in a stopped
+ *  state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
+{
+	u32 reg_val;
+	u16 i;
+
+	/*
+	 * Set the adapter_stopped flag so other driver functions stop touching
+	 * the hardware
+	 */
+	hw->adapter_stopped = true;
+
+	/* Disable the receive unit */
+	hw->mac.ops.disable_rx(hw);
+
+	/* Clear interrupt mask to stop interrupts from being generated */
+	IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
+
+	/* Clear any pending interrupts, flush previous writes */
+	IXGBE_READ_REG(hw, IXGBE_EICR);
+
+	/* Disable the transmit unit.  Each queue must be disabled. */
+	for (i = 0; i < hw->mac.max_tx_queues; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), IXGBE_TXDCTL_SWFLSH);
+
+	/* Disable the receive unit by stopping each queue */
+	for (i = 0; i < hw->mac.max_rx_queues; i++) {
+		reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+		reg_val &= ~IXGBE_RXDCTL_ENABLE;
+		reg_val |= IXGBE_RXDCTL_SWFLSH;
+		IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val);
+	}
+
+	/* flush all queues disables */
+	IXGBE_WRITE_FLUSH(hw);
+	usleep_range(1000, 2000);
+
+	/*
+	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+	 * access and verify no pending requests
+	 */
+	return ixgbe_disable_pcie_master(hw);
+}
+
+/**
+ *  ixgbe_led_on_generic - Turns on the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn on
+ **/
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	/* To turn on the LED, set mode to ON. */
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_led_off_generic - Turns off the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn off
+ **/
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	/* To turn off the LED, set mode to OFF. */
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_eeprom_params_generic - Initialize EEPROM params
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ *  ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	u32 eec;
+	u16 eeprom_size;
+
+	if (eeprom->type == ixgbe_eeprom_uninitialized) {
+		eeprom->type = ixgbe_eeprom_none;
+		/* Set default semaphore delay to 10ms which is a well
+		 * tested value */
+		eeprom->semaphore_delay = 10;
+		/* Clear EEPROM page size, it will be initialized as needed */
+		eeprom->word_page_size = 0;
+
+		/*
+		 * Check for EEPROM present first.
+		 * If not present leave as none
+		 */
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+		if (eec & IXGBE_EEC_PRES) {
+			eeprom->type = ixgbe_eeprom_spi;
+
+			/*
+			 * SPI EEPROM is assumed here.  This code would need to
+			 * change if a future EEPROM is not SPI.
+			 */
+			eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+					    IXGBE_EEC_SIZE_SHIFT);
+			eeprom->word_size = 1 << (eeprom_size +
+						  IXGBE_EEPROM_WORD_SIZE_SHIFT);
+		}
+
+		if (eec & IXGBE_EEC_ADDR_SIZE)
+			eeprom->address_bits = 16;
+		else
+			eeprom->address_bits = 8;
+		hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: %d\n",
+		       eeprom->type, eeprom->word_size, eeprom->address_bits);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to write
+ *  @words: number of words
+ *  @data: 16 bit word(s) to write to EEPROM
+ *
+ *  Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					       u16 words, u16 *data)
+{
+	s32 status;
+	u16 i, count;
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (words == 0)
+		return IXGBE_ERR_INVALID_ARGUMENT;
+
+	if (offset + words > hw->eeprom.word_size)
+		return IXGBE_ERR_EEPROM;
+
+	/*
+	 * The EEPROM page size cannot be queried from the chip. We do lazy
+	 * initialization. It is worth to do that when we write large buffer.
+	 */
+	if ((hw->eeprom.word_page_size == 0) &&
+	    (words > IXGBE_EEPROM_PAGE_SIZE_MAX))
+		ixgbe_detect_eeprom_page_size_generic(hw, offset);
+
+	/*
+	 * We cannot hold synchronization semaphores for too long
+	 * to avoid other entity starvation. However it is more efficient
+	 * to read in bursts than synchronizing access for each word.
+	 */
+	for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+		count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+			 IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+		status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i,
+							    count, &data[i]);
+
+		if (status != 0)
+			break;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of word(s)
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  If ixgbe_eeprom_update_checksum is not called after this function, the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					      u16 words, u16 *data)
+{
+	s32 status;
+	u16 word;
+	u16 page_size;
+	u16 i;
+	u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
+
+	/* Prepare the EEPROM for writing  */
+	status = ixgbe_acquire_eeprom(hw);
+	if (status)
+		return status;
+
+	if (ixgbe_ready_eeprom(hw) != 0) {
+		ixgbe_release_eeprom(hw);
+		return IXGBE_ERR_EEPROM;
+	}
+
+	for (i = 0; i < words; i++) {
+		ixgbe_standby_eeprom(hw);
+
+		/* Send the WRITE ENABLE command (8 bit opcode) */
+		ixgbe_shift_out_eeprom_bits(hw,
+					    IXGBE_EEPROM_WREN_OPCODE_SPI,
+					    IXGBE_EEPROM_OPCODE_BITS);
+
+		ixgbe_standby_eeprom(hw);
+
+		/* Some SPI eeproms use the 8th address bit embedded
+		 * in the opcode
+		 */
+		if ((hw->eeprom.address_bits == 8) &&
+		    ((offset + i) >= 128))
+			write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+		/* Send the Write command (8-bit opcode + addr) */
+		ixgbe_shift_out_eeprom_bits(hw, write_opcode,
+					    IXGBE_EEPROM_OPCODE_BITS);
+		ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+					    hw->eeprom.address_bits);
+
+		page_size = hw->eeprom.word_page_size;
+
+		/* Send the data in burst via SPI */
+		do {
+			word = data[i];
+			word = (word >> 8) | (word << 8);
+			ixgbe_shift_out_eeprom_bits(hw, word, 16);
+
+			if (page_size == 0)
+				break;
+
+			/* do not wrap around page */
+			if (((offset + i) & (page_size - 1)) ==
+			    (page_size - 1))
+				break;
+		} while (++i < words);
+
+		ixgbe_standby_eeprom(hw);
+		usleep_range(10000, 20000);
+	}
+	/* Done with writing - release the EEPROM */
+	ixgbe_release_eeprom(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @data: 16 bit word to be written to the EEPROM
+ *
+ *  If ixgbe_eeprom_update_checksum is not called after this function, the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	hw->eeprom.ops.init_params(hw);
+
+	if (offset >= hw->eeprom.word_size)
+		return IXGBE_ERR_EEPROM;
+
+	return ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data);
+}
+
+/**
+ *  ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @words: number of word(s)
+ *  @data: read 16 bit words(s) from EEPROM
+ *
+ *  Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					      u16 words, u16 *data)
+{
+	s32 status;
+	u16 i, count;
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (words == 0)
+		return IXGBE_ERR_INVALID_ARGUMENT;
+
+	if (offset + words > hw->eeprom.word_size)
+		return IXGBE_ERR_EEPROM;
+
+	/*
+	 * We cannot hold synchronization semaphores for too long
+	 * to avoid other entity starvation. However it is more efficient
+	 * to read in bursts than synchronizing access for each word.
+	 */
+	for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+		count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+			 IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+
+		status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i,
+							   count, &data[i]);
+
+		if (status)
+			return status;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @words: number of word(s)
+ *  @data: read 16 bit word(s) from EEPROM
+ *
+ *  Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					     u16 words, u16 *data)
+{
+	s32 status;
+	u16 word_in;
+	u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+	u16 i;
+
+	/* Prepare the EEPROM for reading  */
+	status = ixgbe_acquire_eeprom(hw);
+	if (status)
+		return status;
+
+	if (ixgbe_ready_eeprom(hw) != 0) {
+		ixgbe_release_eeprom(hw);
+		return IXGBE_ERR_EEPROM;
+	}
+
+	for (i = 0; i < words; i++) {
+		ixgbe_standby_eeprom(hw);
+		/* Some SPI eeproms use the 8th address bit embedded
+		 * in the opcode
+		 */
+		if ((hw->eeprom.address_bits == 8) &&
+		    ((offset + i) >= 128))
+			read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+		/* Send the READ command (opcode + addr) */
+		ixgbe_shift_out_eeprom_bits(hw, read_opcode,
+					    IXGBE_EEPROM_OPCODE_BITS);
+		ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+					    hw->eeprom.address_bits);
+
+		/* Read the data. */
+		word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
+		data[i] = (word_in >> 8) | (word_in << 8);
+	}
+
+	/* End this read operation */
+	ixgbe_release_eeprom(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @data: read 16 bit value from EEPROM
+ *
+ *  Reads 16 bit value from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+				       u16 *data)
+{
+	hw->eeprom.ops.init_params(hw);
+
+	if (offset >= hw->eeprom.word_size)
+		return IXGBE_ERR_EEPROM;
+
+	return ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+}
+
+/**
+ *  ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of word(s)
+ *  @data: 16 bit word(s) from the EEPROM
+ *
+ *  Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				   u16 words, u16 *data)
+{
+	u32 eerd;
+	s32 status;
+	u32 i;
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (words == 0)
+		return IXGBE_ERR_INVALID_ARGUMENT;
+
+	if (offset >= hw->eeprom.word_size)
+		return IXGBE_ERR_EEPROM;
+
+	for (i = 0; i < words; i++) {
+		eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+		       IXGBE_EEPROM_RW_REG_START;
+
+		IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
+
+		if (status == 0) {
+			data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
+				   IXGBE_EEPROM_RW_REG_DATA);
+		} else {
+			hw_dbg(hw, "Eeprom read timed out\n");
+			return status;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be used as a scratch pad
+ *
+ *  Discover EEPROM page size by writing marching data at given offset.
+ *  This function is called only when we are writing a new large buffer
+ *  at given offset so the data would be overwritten anyway.
+ **/
+static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+						 u16 offset)
+{
+	u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX];
+	s32 status;
+	u16 i;
+
+	for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++)
+		data[i] = i;
+
+	hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX;
+	status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset,
+					     IXGBE_EEPROM_PAGE_SIZE_MAX, data);
+	hw->eeprom.word_page_size = 0;
+	if (status)
+		return status;
+
+	status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+	if (status)
+		return status;
+
+	/*
+	 * When writing in burst more than the actual page size
+	 * EEPROM address wraps around current page.
+	 */
+	hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0];
+
+	hw_dbg(hw, "Detected EEPROM page size = %d words.\n",
+	       hw->eeprom.word_page_size);
+	return 0;
+}
+
+/**
+ *  ixgbe_read_eerd_generic - Read EEPROM word using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data);
+}
+
+/**
+ *  ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @words: number of words
+ *  @data: word(s) write to the EEPROM
+ *
+ *  Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				    u16 words, u16 *data)
+{
+	u32 eewr;
+	s32 status;
+	u16 i;
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (words == 0)
+		return IXGBE_ERR_INVALID_ARGUMENT;
+
+	if (offset >= hw->eeprom.word_size)
+		return IXGBE_ERR_EEPROM;
+
+	for (i = 0; i < words; i++) {
+		eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+		       (data[i] << IXGBE_EEPROM_RW_REG_DATA) |
+		       IXGBE_EEPROM_RW_REG_START;
+
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+		if (status) {
+			hw_dbg(hw, "Eeprom write EEWR timed out\n");
+			return status;
+		}
+
+		IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
+
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+		if (status) {
+			hw_dbg(hw, "Eeprom write EEWR timed out\n");
+			return status;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_write_eewr_generic - Write EEPROM word using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data);
+}
+
+/**
+ *  ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
+ *  @hw: pointer to hardware structure
+ *  @ee_reg: EEPROM flag for polling
+ *
+ *  Polls the status bit (bit 1) of the EERD or EEWR to determine when the
+ *  read or write is done respectively.
+ **/
+static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
+{
+	u32 i;
+	u32 reg;
+
+	for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) {
+		if (ee_reg == IXGBE_NVM_POLL_READ)
+			reg = IXGBE_READ_REG(hw, IXGBE_EERD);
+		else
+			reg = IXGBE_READ_REG(hw, IXGBE_EEWR);
+
+		if (reg & IXGBE_EEPROM_RW_REG_DONE) {
+			return 0;
+		}
+		udelay(5);
+	}
+	return IXGBE_ERR_EEPROM;
+}
+
+/**
+ *  ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
+ *  @hw: pointer to hardware structure
+ *
+ *  Prepares EEPROM for access using bit-bang method. This function should
+ *  be called before issuing a command to the EEPROM.
+ **/
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
+{
+	u32 eec;
+	u32 i;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0)
+		return IXGBE_ERR_SWFW_SYNC;
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	/* Request EEPROM Access */
+	eec |= IXGBE_EEC_REQ;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+	for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) {
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+		if (eec & IXGBE_EEC_GNT)
+			break;
+		udelay(5);
+	}
+
+	/* Release if grant not acquired */
+	if (!(eec & IXGBE_EEC_GNT)) {
+		eec &= ~IXGBE_EEC_REQ;
+		IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+		hw_dbg(hw, "Could not acquire EEPROM grant\n");
+
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+		return IXGBE_ERR_EEPROM;
+	}
+
+	/* Setup EEPROM for Read/Write */
+	/* Clear CS and SK */
+	eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(1);
+	return 0;
+}
+
+/**
+ *  ixgbe_get_eeprom_semaphore - Get hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the hardware semaphores so EEPROM access can occur for bit-bang method
+ **/
+static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+	u32 timeout = 2000;
+	u32 i;
+	u32 swsm;
+
+	/* Get SMBI software semaphore between device drivers first */
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+		if (!(swsm & IXGBE_SWSM_SMBI))
+			break;
+		usleep_range(50, 100);
+	}
+
+	if (i == timeout) {
+		hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore not granted.\n");
+		/* this release is particularly important because our attempts
+		 * above to get the semaphore may have succeeded, and if there
+		 * was a timeout, we should unconditionally clear the semaphore
+		 * bits to free the driver to make progress
+		 */
+		ixgbe_release_eeprom_semaphore(hw);
+
+		usleep_range(50, 100);
+		/* one last try
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+		if (swsm & IXGBE_SWSM_SMBI) {
+			hw_dbg(hw, "Software semaphore SMBI between device drivers not granted.\n");
+			return IXGBE_ERR_EEPROM;
+		}
+	}
+
+	/* Now get the semaphore between SW/FW through the SWESMBI bit */
+	for (i = 0; i < timeout; i++) {
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+
+		/* Set the SW EEPROM semaphore bit to request access */
+		swsm |= IXGBE_SWSM_SWESMBI;
+		IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+
+		/* If we set the bit successfully then we got the
+		 * semaphore.
+		 */
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+		if (swsm & IXGBE_SWSM_SWESMBI)
+			break;
+
+		usleep_range(50, 100);
+	}
+
+	/* Release semaphores and return error if SW EEPROM semaphore
+	 * was not granted because we don't have access to the EEPROM
+	 */
+	if (i >= timeout) {
+		hw_dbg(hw, "SWESMBI Software EEPROM semaphore not granted.\n");
+		ixgbe_release_eeprom_semaphore(hw);
+		return IXGBE_ERR_EEPROM;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_release_eeprom_semaphore - Release hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  This function clears hardware semaphore bits.
+ **/
+static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+	u32 swsm;
+
+	swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+
+	/* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */
+	swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI);
+	IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ *  ixgbe_ready_eeprom - Polls for EEPROM ready
+ *  @hw: pointer to hardware structure
+ **/
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw)
+{
+	u16 i;
+	u8 spi_stat_reg;
+
+	/*
+	 * Read "Status Register" repeatedly until the LSB is cleared.  The
+	 * EEPROM will signal that the command has been completed by clearing
+	 * bit 0 of the internal status register.  If it's not cleared within
+	 * 5 milliseconds, then error out.
+	 */
+	for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) {
+		ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI,
+					    IXGBE_EEPROM_OPCODE_BITS);
+		spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8);
+		if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI))
+			break;
+
+		udelay(5);
+		ixgbe_standby_eeprom(hw);
+	}
+
+	/*
+	 * On some parts, SPI write time could vary from 0-20mSec on 3.3V
+	 * devices (and only 0-5mSec on 5V devices)
+	 */
+	if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) {
+		hw_dbg(hw, "SPI EEPROM Status error\n");
+		return IXGBE_ERR_EEPROM;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
+ *  @hw: pointer to hardware structure
+ **/
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
+{
+	u32 eec;
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	/* Toggle CS to flush commands */
+	eec |= IXGBE_EEC_CS;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(1);
+	eec &= ~IXGBE_EEC_CS;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(1);
+}
+
+/**
+ *  ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
+ *  @hw: pointer to hardware structure
+ *  @data: data to send to the EEPROM
+ *  @count: number of bits to shift out
+ **/
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+					u16 count)
+{
+	u32 eec;
+	u32 mask;
+	u32 i;
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	/*
+	 * Mask is used to shift "count" bits of "data" out to the EEPROM
+	 * one bit at a time.  Determine the starting bit based on count
+	 */
+	mask = 0x01 << (count - 1);
+
+	for (i = 0; i < count; i++) {
+		/*
+		 * A "1" is shifted out to the EEPROM by setting bit "DI" to a
+		 * "1", and then raising and then lowering the clock (the SK
+		 * bit controls the clock input to the EEPROM).  A "0" is
+		 * shifted out to the EEPROM by setting "DI" to "0" and then
+		 * raising and then lowering the clock.
+		 */
+		if (data & mask)
+			eec |= IXGBE_EEC_DI;
+		else
+			eec &= ~IXGBE_EEC_DI;
+
+		IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+		IXGBE_WRITE_FLUSH(hw);
+
+		udelay(1);
+
+		ixgbe_raise_eeprom_clk(hw, &eec);
+		ixgbe_lower_eeprom_clk(hw, &eec);
+
+		/*
+		 * Shift mask to signify next bit of data to shift in to the
+		 * EEPROM
+		 */
+		mask = mask >> 1;
+	}
+
+	/* We leave the "DI" bit set to "0" when we leave this routine. */
+	eec &= ~IXGBE_EEC_DI;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ *  ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
+ *  @hw: pointer to hardware structure
+ **/
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
+{
+	u32 eec;
+	u32 i;
+	u16 data = 0;
+
+	/*
+	 * In order to read a register from the EEPROM, we need to shift
+	 * 'count' bits in from the EEPROM. Bits are "shifted in" by raising
+	 * the clock input to the EEPROM (setting the SK bit), and then reading
+	 * the value of the "DO" bit.  During this "shifting in" process the
+	 * "DI" bit should always be clear.
+	 */
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI);
+
+	for (i = 0; i < count; i++) {
+		data = data << 1;
+		ixgbe_raise_eeprom_clk(hw, &eec);
+
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+		eec &= ~(IXGBE_EEC_DI);
+		if (eec & IXGBE_EEC_DO)
+			data |= 1;
+
+		ixgbe_lower_eeprom_clk(hw, &eec);
+	}
+
+	return data;
+}
+
+/**
+ *  ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
+ *  @hw: pointer to hardware structure
+ *  @eec: EEC register's current value
+ **/
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+	/*
+	 * Raise the clock input to the EEPROM
+	 * (setting the SK bit), then delay
+	 */
+	*eec = *eec | IXGBE_EEC_SK;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(1);
+}
+
+/**
+ *  ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
+ *  @hw: pointer to hardware structure
+ *  @eecd: EECD's current value
+ **/
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+	/*
+	 * Lower the clock input to the EEPROM (clearing the SK bit), then
+	 * delay
+	 */
+	*eec = *eec & ~IXGBE_EEC_SK;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(1);
+}
+
+/**
+ *  ixgbe_release_eeprom - Release EEPROM, release semaphores
+ *  @hw: pointer to hardware structure
+ **/
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
+{
+	u32 eec;
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	eec |= IXGBE_EEC_CS;  /* Pull CS high */
+	eec &= ~IXGBE_EEC_SK; /* Lower SCK */
+
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+
+	udelay(1);
+
+	/* Stop requesting EEPROM access */
+	eec &= ~IXGBE_EEC_REQ;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+	/*
+	 * Delay before attempt to obtain semaphore again to allow FW
+	 * access. semaphore_delay is in ms we need us for usleep_range
+	 */
+	usleep_range(hw->eeprom.semaphore_delay * 1000,
+		     hw->eeprom.semaphore_delay * 2000);
+}
+
+/**
+ *  ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+	u16 i;
+	u16 j;
+	u16 checksum = 0;
+	u16 length = 0;
+	u16 pointer = 0;
+	u16 word = 0;
+
+	/* Include 0x0-0x3F in the checksum */
+	for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
+		if (hw->eeprom.ops.read(hw, i, &word)) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			break;
+		}
+		checksum += word;
+	}
+
+	/* Include all data from pointers except for the fw pointer */
+	for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
+		if (hw->eeprom.ops.read(hw, i, &pointer)) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			return IXGBE_ERR_EEPROM;
+		}
+
+		/* If the pointer seems invalid */
+		if (pointer == 0xFFFF || pointer == 0)
+			continue;
+
+		if (hw->eeprom.ops.read(hw, pointer, &length)) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			return IXGBE_ERR_EEPROM;
+		}
+
+		if (length == 0xFFFF || length == 0)
+			continue;
+
+		for (j = pointer + 1; j <= pointer + length; j++) {
+			if (hw->eeprom.ops.read(hw, j, &word)) {
+				hw_dbg(hw, "EEPROM read failed\n");
+				return IXGBE_ERR_EEPROM;
+			}
+			checksum += word;
+		}
+	}
+
+	checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+	return (s32)checksum;
+}
+
+/**
+ *  ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum.  If the
+ *  caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+					   u16 *checksum_val)
+{
+	s32 status;
+	u16 checksum;
+	u16 read_checksum = 0;
+
+	/*
+	 * Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+	if (status) {
+		hw_dbg(hw, "EEPROM read failed\n");
+		return status;
+	}
+
+	status = hw->eeprom.ops.calc_checksum(hw);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
+	if (status) {
+		hw_dbg(hw, "EEPROM read failed\n");
+		return status;
+	}
+
+	/* Verify read checksum from EEPROM is the same as
+	 * calculated checksum
+	 */
+	if (read_checksum != checksum)
+		status = IXGBE_ERR_EEPROM_CHECKSUM;
+
+	/* If the user cares, return the calculated checksum */
+	if (checksum_val)
+		*checksum_val = checksum;
+
+	return status;
+}
+
+/**
+ *  ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 checksum;
+
+	/*
+	 * Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+	if (status) {
+		hw_dbg(hw, "EEPROM read failed\n");
+		return status;
+	}
+
+	status = hw->eeprom.ops.calc_checksum(hw);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, checksum);
+
+	return status;
+}
+
+/**
+ *  ixgbe_set_rar_generic - Set Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq "set" or "pool" index
+ *  @enable_addr: set flag that address is active
+ *
+ *  Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+			  u32 enable_addr)
+{
+	u32 rar_low, rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	/* Make sure we are using a valid rar index range */
+	if (index >= rar_entries) {
+		hw_dbg(hw, "RAR index %d is out of range.\n", index);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	/* setup VMDq pool selection before this RAR gets enabled */
+	hw->mac.ops.set_vmdq(hw, index, vmdq);
+
+	/*
+	 * HW expects these in little endian so we reverse the byte
+	 * order from network order (big endian) to little endian
+	 */
+	rar_low = ((u32)addr[0] |
+		   ((u32)addr[1] << 8) |
+		   ((u32)addr[2] << 16) |
+		   ((u32)addr[3] << 24));
+	/*
+	 * Some parts put the VMDq setting in the extra RAH bits,
+	 * so save everything except the lower 16 bits that hold part
+	 * of the address and the address valid bit.
+	 */
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+	rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+	rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8));
+
+	if (enable_addr != 0)
+		rar_high |= IXGBE_RAH_AV;
+
+	IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_clear_rar_generic - Remove Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *
+ *  Clears an ethernet address from a receive address register.
+ **/
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	/* Make sure we are using a valid rar index range */
+	if (index >= rar_entries) {
+		hw_dbg(hw, "RAR index %d is out of range.\n", index);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	/*
+	 * Some parts put the VMDq setting in the extra RAH bits,
+	 * so save everything except the lower 16 bits that hold part
+	 * of the address and the address valid bit.
+	 */
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+	rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+
+	IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+
+	/* clear VMDq pool/queue selection for this RAR */
+	hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_rx_addrs_generic - Initializes receive address filters.
+ *  @hw: pointer to hardware structure
+ *
+ *  Places the MAC address in receive address register 0 and clears the rest
+ *  of the receive address registers. Clears the multicast table. Assumes
+ *  the receiver is in reset when the routine is called.
+ **/
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	/*
+	 * If the current mac address is valid, assume it is a software override
+	 * to the permanent address.
+	 * Otherwise, use the permanent address from the eeprom.
+	 */
+	if (!is_valid_ether_addr(hw->mac.addr)) {
+		/* Get the MAC address from the RAR0 for later reference */
+		hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
+
+		hw_dbg(hw, " Keeping Current RAR0 Addr =%pM\n", hw->mac.addr);
+	} else {
+		/* Setup the receive address. */
+		hw_dbg(hw, "Overriding MAC Address in RAR[0]\n");
+		hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr);
+
+		hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+
+		/*  clear VMDq pool/queue selection for RAR 0 */
+		hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
+	}
+	hw->addr_ctrl.overflow_promisc = 0;
+
+	hw->addr_ctrl.rar_used_count = 1;
+
+	/* Zero out the other receive addresses. */
+	hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1);
+	for (i = 1; i < rar_entries; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
+	}
+
+	/* Clear the MTA */
+	hw->addr_ctrl.mta_in_use = 0;
+	IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
+
+	hw_dbg(hw, " Clearing MTA\n");
+	for (i = 0; i < hw->mac.mcft_size; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
+
+	if (hw->mac.ops.init_uta_tables)
+		hw->mac.ops.init_uta_tables(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_mta_vector - Determines bit-vector in multicast table to set
+ *  @hw: pointer to hardware structure
+ *  @mc_addr: the multicast address
+ *
+ *  Extracts the 12 bits, from a multicast address, to determine which
+ *  bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ *  incoming rx multicast addresses, to determine the bit-vector to check in
+ *  the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ *  by the MO field of the MCSTCTRL. The MO field is set during initialization
+ *  to mc_filter_type.
+ **/
+static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+	u32 vector = 0;
+
+	switch (hw->mac.mc_filter_type) {
+	case 0:   /* use bits [47:36] of the address */
+		vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+		break;
+	case 1:   /* use bits [46:35] of the address */
+		vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+		break;
+	case 2:   /* use bits [45:34] of the address */
+		vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+		break;
+	case 3:   /* use bits [43:32] of the address */
+		vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+		break;
+	default:  /* Invalid mc_filter_type */
+		hw_dbg(hw, "MC filter type param set incorrectly\n");
+		break;
+	}
+
+	/* vector can only be 12-bits or boundary will be exceeded */
+	vector &= 0xFFF;
+	return vector;
+}
+
+/**
+ *  ixgbe_set_mta - Set bit-vector in multicast table
+ *  @hw: pointer to hardware structure
+ *  @hash_value: Multicast address hash value
+ *
+ *  Sets the bit-vector in the multicast table.
+ **/
+static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+	u32 vector;
+	u32 vector_bit;
+	u32 vector_reg;
+
+	hw->addr_ctrl.mta_in_use++;
+
+	vector = ixgbe_mta_vector(hw, mc_addr);
+	hw_dbg(hw, " bit-vector = 0x%03X\n", vector);
+
+	/*
+	 * The MTA is a register array of 128 32-bit registers. It is treated
+	 * like an array of 4096 bits.  We want to set bit
+	 * BitArray[vector_value]. So we figure out what register the bit is
+	 * in, read it, OR in the new bit, then write back the new value.  The
+	 * register is determined by the upper 7 bits of the vector value and
+	 * the bit within that register are determined by the lower 5 bits of
+	 * the value.
+	 */
+	vector_reg = (vector >> 5) & 0x7F;
+	vector_bit = vector & 0x1F;
+	hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit);
+}
+
+/**
+ *  ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
+ *  @hw: pointer to hardware structure
+ *  @netdev: pointer to net device structure
+ *
+ *  The given list replaces any existing list. Clears the MC addrs from receive
+ *  address registers and the multicast table. Uses unused receive address
+ *  registers for the first multicast addresses, and hashes the rest into the
+ *  multicast table.
+ **/
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw,
+				      struct net_device *netdev)
+{
+	struct netdev_hw_addr *ha;
+	u32 i;
+
+	/*
+	 * Set the new number of MC addresses that we are being requested to
+	 * use.
+	 */
+	hw->addr_ctrl.num_mc_addrs = netdev_mc_count(netdev);
+	hw->addr_ctrl.mta_in_use = 0;
+
+	/* Clear mta_shadow */
+	hw_dbg(hw, " Clearing MTA\n");
+	memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+	/* Update mta shadow */
+	netdev_for_each_mc_addr(ha, netdev) {
+		hw_dbg(hw, " Adding the multicast addresses:\n");
+		ixgbe_set_mta(hw, ha->addr);
+	}
+
+	/* Enable mta */
+	for (i = 0; i < hw->mac.mcft_size; i++)
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i,
+				      hw->mac.mta_shadow[i]);
+
+	if (hw->addr_ctrl.mta_in_use > 0)
+		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
+				IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
+
+	hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n");
+	return 0;
+}
+
+/**
+ *  ixgbe_enable_mc_generic - Enable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
+
+	if (a->mta_in_use > 0)
+		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE |
+				hw->mac.mc_filter_type);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_disable_mc_generic - Disable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
+
+	if (a->mta_in_use > 0)
+		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_fc_enable_generic - Enable flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to the current settings.
+ **/
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
+{
+	u32 mflcn_reg, fccfg_reg;
+	u32 reg;
+	u32 fcrtl, fcrth;
+	int i;
+
+	/* Validate the water mark configuration. */
+	if (!hw->fc.pause_time)
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
+
+	/* Low water mark of zero causes XOFF floods */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+		    hw->fc.high_water[i]) {
+			if (!hw->fc.low_water[i] ||
+			    hw->fc.low_water[i] >= hw->fc.high_water[i]) {
+				hw_dbg(hw, "Invalid water mark configuration\n");
+				return IXGBE_ERR_INVALID_LINK_SETTINGS;
+			}
+		}
+	}
+
+	/* Negotiate the fc mode to use */
+	ixgbe_fc_autoneg(hw);
+
+	/* Disable any previous flow control settings */
+	mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+	mflcn_reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE);
+
+	fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
+	fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY);
+
+	/*
+	 * The possible values of fc.current_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *    we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.current_mode) {
+	case ixgbe_fc_none:
+		/*
+		 * Flow control is disabled by software override or autoneg.
+		 * The code below will actually disable it in the HW.
+		 */
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+		mflcn_reg |= IXGBE_MFLCN_RFCE;
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
+		break;
+	case ixgbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		mflcn_reg |= IXGBE_MFLCN_RFCE;
+		fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
+		break;
+	default:
+		hw_dbg(hw, "Flow control param set incorrectly\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	/* Set 802.3x based flow control settings. */
+	mflcn_reg |= IXGBE_MFLCN_DPF;
+	IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
+	IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
+
+	/* Set up and enable Rx high/low water mark thresholds, enable XON. */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+		    hw->fc.high_water[i]) {
+			fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl);
+			fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+		} else {
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
+			/*
+			 * In order to prevent Tx hangs when the internal Tx
+			 * switch is enabled we must set the high water mark
+			 * to the maximum FCRTH value.  This allows the Tx
+			 * switch to function even under heavy Rx workloads.
+			 */
+			fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 32;
+		}
+
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), fcrth);
+	}
+
+	/* Configure pause time (2 TCs per register) */
+	reg = hw->fc.pause_time * 0x00010001;
+	for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
+		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_negotiate_fc - Negotiate flow control
+ *  @hw: pointer to hardware structure
+ *  @adv_reg: flow control advertised settings
+ *  @lp_reg: link partner's flow control settings
+ *  @adv_sym: symmetric pause bit in advertisement
+ *  @adv_asm: asymmetric pause bit in advertisement
+ *  @lp_sym: symmetric pause bit in link partner advertisement
+ *  @lp_asm: asymmetric pause bit in link partner advertisement
+ *
+ *  Find the intersection between advertised settings and link partner's
+ *  advertised settings
+ **/
+static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+			      u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+{
+	if ((!(adv_reg)) ||  (!(lp_reg)))
+		return IXGBE_ERR_FC_NOT_NEGOTIATED;
+
+	if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) {
+		/*
+		 * Now we need to check if the user selected Rx ONLY
+		 * of pause frames.  In this case, we had to advertise
+		 * FULL flow control because we could not advertise RX
+		 * ONLY. Hence, we must now check to see if we need to
+		 * turn OFF the TRANSMISSION of PAUSE frames.
+		 */
+		if (hw->fc.requested_mode == ixgbe_fc_full) {
+			hw->fc.current_mode = ixgbe_fc_full;
+			hw_dbg(hw, "Flow Control = FULL.\n");
+		} else {
+			hw->fc.current_mode = ixgbe_fc_rx_pause;
+			hw_dbg(hw, "Flow Control=RX PAUSE frames only\n");
+		}
+	} else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+		   (lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+		hw->fc.current_mode = ixgbe_fc_tx_pause;
+		hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+	} else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+		   !(lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+		hw->fc.current_mode = ixgbe_fc_rx_pause;
+		hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+	} else {
+		hw->fc.current_mode = ixgbe_fc_none;
+		hw_dbg(hw, "Flow Control = NONE.\n");
+	}
+	return 0;
+}
+
+/**
+ *  ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according on 1 gig fiber.
+ **/
+static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw)
+{
+	u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+	s32 ret_val;
+
+	/*
+	 * On multispeed fiber at 1g, bail out if
+	 * - link is up but AN did not complete, or if
+	 * - link is up and AN completed but timed out
+	 */
+
+	linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+	if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+	    (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1))
+		return IXGBE_ERR_FC_NOT_NEGOTIATED;
+
+	pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+	pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+
+	ret_val =  ixgbe_negotiate_fc(hw, pcs_anadv_reg,
+			       pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE,
+			       IXGBE_PCS1GANA_ASM_PAUSE,
+			       IXGBE_PCS1GANA_SYM_PAUSE,
+			       IXGBE_PCS1GANA_ASM_PAUSE);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to IEEE clause 37.
+ **/
+static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw)
+{
+	u32 links2, anlp1_reg, autoc_reg, links;
+	s32 ret_val;
+
+	/*
+	 * On backplane, bail out if
+	 * - backplane autoneg was not completed, or if
+	 * - we are 82599 and link partner is not AN enabled
+	 */
+	links = IXGBE_READ_REG(hw, IXGBE_LINKS);
+	if ((links & IXGBE_LINKS_KX_AN_COMP) == 0)
+		return IXGBE_ERR_FC_NOT_NEGOTIATED;
+
+	if (hw->mac.type == ixgbe_mac_82599EB) {
+		links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
+		if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0)
+			return IXGBE_ERR_FC_NOT_NEGOTIATED;
+	}
+	/*
+	 * Read the 10g AN autoc and LP ability registers and resolve
+	 * local flow control settings accordingly
+	 */
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+
+	ret_val = ixgbe_negotiate_fc(hw, autoc_reg,
+		anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE,
+		IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to IEEE clause 37.
+ **/
+static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw)
+{
+	u16 technology_ability_reg = 0;
+	u16 lp_technology_ability_reg = 0;
+
+	hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+			     MDIO_MMD_AN,
+			     &technology_ability_reg);
+	hw->phy.ops.read_reg(hw, MDIO_AN_LPA,
+			     MDIO_MMD_AN,
+			     &lp_technology_ability_reg);
+
+	return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg,
+				  (u32)lp_technology_ability_reg,
+				  IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE,
+				  IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE);
+}
+
+/**
+ *  ixgbe_fc_autoneg - Configure flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Compares our advertised flow control capabilities to those advertised by
+ *  our link partner, and determines the proper flow control mode to use.
+ **/
+void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
+{
+	s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+	ixgbe_link_speed speed;
+	bool link_up;
+
+	/*
+	 * AN should have completed when the cable was plugged in.
+	 * Look for reasons to bail out.  Bail out if:
+	 * - FC autoneg is disabled, or if
+	 * - link is not up.
+	 *
+	 * Since we're being called from an LSC, link is already known to be up.
+	 * So use link_up_wait_to_complete=false.
+	 */
+	if (hw->fc.disable_fc_autoneg)
+		goto out;
+
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+	if (!link_up)
+		goto out;
+
+	switch (hw->phy.media_type) {
+	/* Autoneg flow control on fiber adapters */
+	case ixgbe_media_type_fiber:
+		if (speed == IXGBE_LINK_SPEED_1GB_FULL)
+			ret_val = ixgbe_fc_autoneg_fiber(hw);
+		break;
+
+	/* Autoneg flow control on backplane adapters */
+	case ixgbe_media_type_backplane:
+		ret_val = ixgbe_fc_autoneg_backplane(hw);
+		break;
+
+	/* Autoneg flow control on copper adapters */
+	case ixgbe_media_type_copper:
+		if (ixgbe_device_supports_autoneg_fc(hw))
+			ret_val = ixgbe_fc_autoneg_copper(hw);
+		break;
+
+	default:
+		break;
+	}
+
+out:
+	if (ret_val == 0) {
+		hw->fc.fc_was_autonegged = true;
+	} else {
+		hw->fc.fc_was_autonegged = false;
+		hw->fc.current_mode = hw->fc.requested_mode;
+	}
+}
+
+/**
+ * ixgbe_pcie_timeout_poll - Return number of times to poll for completion
+ * @hw: pointer to hardware structure
+ *
+ * System-wide timeout range is encoded in PCIe Device Control2 register.
+ *
+ *  Add 10% to specified maximum and return the number of times to poll for
+ *  completion timeout, in units of 100 microsec.  Never return less than
+ *  800 = 80 millisec.
+ **/
+static u32 ixgbe_pcie_timeout_poll(struct ixgbe_hw *hw)
+{
+	s16 devctl2;
+	u32 pollcnt;
+
+	devctl2 = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2);
+	devctl2 &= IXGBE_PCIDEVCTRL2_TIMEO_MASK;
+
+	switch (devctl2) {
+	case IXGBE_PCIDEVCTRL2_65_130ms:
+		 pollcnt = 1300;         /* 130 millisec */
+		break;
+	case IXGBE_PCIDEVCTRL2_260_520ms:
+		pollcnt = 5200;         /* 520 millisec */
+		break;
+	case IXGBE_PCIDEVCTRL2_1_2s:
+		pollcnt = 20000;        /* 2 sec */
+		break;
+	case IXGBE_PCIDEVCTRL2_4_8s:
+		pollcnt = 80000;        /* 8 sec */
+		break;
+	case IXGBE_PCIDEVCTRL2_17_34s:
+		pollcnt = 34000;        /* 34 sec */
+		break;
+	case IXGBE_PCIDEVCTRL2_50_100us:        /* 100 microsecs */
+	case IXGBE_PCIDEVCTRL2_1_2ms:           /* 2 millisecs */
+	case IXGBE_PCIDEVCTRL2_16_32ms:         /* 32 millisec */
+	case IXGBE_PCIDEVCTRL2_16_32ms_def:     /* 32 millisec default */
+	default:
+		pollcnt = 800;          /* 80 millisec minimum */
+		break;
+	}
+
+	/* add 10% to spec maximum */
+	return (pollcnt * 11) / 10;
+}
+
+/**
+ *  ixgbe_disable_pcie_master - Disable PCI-express master access
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables PCI-Express master access and verifies there are no pending
+ *  requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable
+ *  bit hasn't caused the master requests to be disabled, else 0
+ *  is returned signifying master requests disabled.
+ **/
+static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
+{
+	u32 i, poll;
+	u16 value;
+
+	/* Always set this bit to ensure any future transactions are blocked */
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, IXGBE_CTRL_GIO_DIS);
+
+	/* Exit if master requests are blocked */
+	if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO) ||
+	    ixgbe_removed(hw->hw_addr))
+		return 0;
+
+	/* Poll for master request bit to clear */
+	for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
+		udelay(100);
+		if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO))
+			return 0;
+	}
+
+	/*
+	 * Two consecutive resets are required via CTRL.RST per datasheet
+	 * 5.2.5.3.2 Master Disable.  We set a flag to inform the reset routine
+	 * of this need.  The first reset prevents new master requests from
+	 * being issued by our device.  We then must wait 1usec or more for any
+	 * remaining completions from the PCIe bus to trickle in, and then reset
+	 * again to clear out any effects they may have had on our device.
+	 */
+	hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n");
+	hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+
+	/*
+	 * Before proceeding, make sure that the PCIe block does not have
+	 * transactions pending.
+	 */
+	poll = ixgbe_pcie_timeout_poll(hw);
+	for (i = 0; i < poll; i++) {
+		udelay(100);
+		value = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_STATUS);
+		if (ixgbe_removed(hw->hw_addr))
+			return 0;
+		if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
+			return 0;
+	}
+
+	hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n");
+	return IXGBE_ERR_MASTER_REQUESTS_PENDING;
+}
+
+/**
+ *  ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to acquire
+ *
+ *  Acquires the SWFW semaphore through the GSSR register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 gssr = 0;
+	u32 swmask = mask;
+	u32 fwmask = mask << 5;
+	u32 timeout = 200;
+	u32 i;
+
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * SW NVM semaphore bit is used for access to all
+		 * SW_FW_SYNC bits (not just NVM)
+		 */
+		if (ixgbe_get_eeprom_semaphore(hw))
+			return IXGBE_ERR_SWFW_SYNC;
+
+		gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+		if (!(gssr & (fwmask | swmask))) {
+			gssr |= swmask;
+			IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+			ixgbe_release_eeprom_semaphore(hw);
+			return 0;
+		} else {
+			/* Resource is currently in use by FW or SW */
+			ixgbe_release_eeprom_semaphore(hw);
+			usleep_range(5000, 10000);
+		}
+	}
+
+	/* If time expired clear the bits holding the lock and retry */
+	if (gssr & (fwmask | swmask))
+		ixgbe_release_swfw_sync(hw, gssr & (fwmask | swmask));
+
+	usleep_range(5000, 10000);
+	return IXGBE_ERR_SWFW_SYNC;
+}
+
+/**
+ *  ixgbe_release_swfw_sync - Release SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to release
+ *
+ *  Releases the SWFW semaphore through the GSSR register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 gssr;
+	u32 swmask = mask;
+
+	ixgbe_get_eeprom_semaphore(hw);
+
+	gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+	gssr &= ~swmask;
+	IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+
+	ixgbe_release_eeprom_semaphore(hw);
+}
+
+/**
+ * prot_autoc_read_generic - Hides MAC differences needed for AUTOC read
+ * @hw: pointer to hardware structure
+ * @reg_val: Value we read from AUTOC
+ * @locked: bool to indicate whether the SW/FW lock should be taken.  Never
+ *	    true in this the generic case.
+ *
+ * The default case requires no protection so just to the register read.
+ **/
+s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
+{
+	*locked = false;
+	*reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	return 0;
+}
+
+/**
+ * prot_autoc_write_generic - Hides MAC differences needed for AUTOC write
+ * @hw: pointer to hardware structure
+ * @reg_val: value to write to AUTOC
+ * @locked: bool to indicate whether the SW/FW lock was already taken by
+ *	    previous read.
+ **/
+s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked)
+{
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_val);
+	return 0;
+}
+
+/**
+ *  ixgbe_disable_rx_buff_generic - Stops the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Stops the receive data path and waits for the HW to internally
+ *  empty the Rx security block.
+ **/
+s32 ixgbe_disable_rx_buff_generic(struct ixgbe_hw *hw)
+{
+#define IXGBE_MAX_SECRX_POLL 40
+	int i;
+	int secrxreg;
+
+	secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+	secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+	for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) {
+		secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT);
+		if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
+			break;
+		else
+			/* Use interrupt-safe sleep just in case */
+			udelay(1000);
+	}
+
+	/* For informational purposes only */
+	if (i >= IXGBE_MAX_SECRX_POLL)
+		hw_dbg(hw, "Rx unit being enabled before security path fully disabled. Continuing with init.\n");
+
+	return 0;
+
+}
+
+/**
+ *  ixgbe_enable_rx_buff - Enables the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables the receive data path
+ **/
+s32 ixgbe_enable_rx_buff_generic(struct ixgbe_hw *hw)
+{
+	int secrxreg;
+
+	secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+	secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit
+ *  @hw: pointer to hardware structure
+ *  @regval: register value to write to RXCTRL
+ *
+ *  Enables the Rx DMA unit
+ **/
+s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval)
+{
+	if (regval & IXGBE_RXCTRL_RXEN)
+		hw->mac.ops.enable_rx(hw);
+	else
+		hw->mac.ops.disable_rx(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_blink_led_start_generic - Blink LED based on index.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to blink
+ **/
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
+{
+	ixgbe_link_speed speed = 0;
+	bool link_up = false;
+	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	bool locked = false;
+	s32 ret_val;
+
+	/*
+	 * Link must be up to auto-blink the LEDs;
+	 * Force it if link is down.
+	 */
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+
+	if (!link_up) {
+		ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
+		if (ret_val)
+			return ret_val;
+
+		autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+		autoc_reg |= IXGBE_AUTOC_FLU;
+
+		ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
+		if (ret_val)
+			return ret_val;
+
+		IXGBE_WRITE_FLUSH(hw);
+
+		usleep_range(10000, 20000);
+	}
+
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg |= IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to stop blinking
+ **/
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 autoc_reg = 0;
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	bool locked = false;
+	s32 ret_val;
+
+	ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
+	if (ret_val)
+		return ret_val;
+
+	autoc_reg &= ~IXGBE_AUTOC_FLU;
+	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+
+	ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
+	if (ret_val)
+		return ret_val;
+
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg &= ~IXGBE_LED_BLINK(index);
+	led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @san_mac_offset: SAN MAC address offset
+ *
+ *  This function will read the EEPROM location for the SAN MAC address
+ *  pointer, and returns the value at that location.  This is used in both
+ *  get and set mac_addr routines.
+ **/
+static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
+					u16 *san_mac_offset)
+{
+	s32 ret_val;
+
+	/*
+	 * First read the EEPROM pointer to see if the MAC addresses are
+	 * available.
+	 */
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR,
+				      san_mac_offset);
+	if (ret_val)
+		hw_err(hw, "eeprom read at offset %d failed\n",
+		       IXGBE_SAN_MAC_ADDR_PTR);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @san_mac_addr: SAN MAC address
+ *
+ *  Reads the SAN MAC address from the EEPROM, if it's available.  This is
+ *  per-port, so set_lan_id() must be called before reading the addresses.
+ *  set_lan_id() is called by identify_sfp(), but this cannot be relied
+ *  upon for non-SFP connections, so we must call it here.
+ **/
+s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+	u16 san_mac_data, san_mac_offset;
+	u8 i;
+	s32 ret_val;
+
+	/*
+	 * First read the EEPROM pointer to see if the MAC addresses are
+	 * available.  If they're not, no point in calling set_lan_id() here.
+	 */
+	ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
+	if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF)
+
+		goto san_mac_addr_clr;
+
+	/* make sure we know which port we need to program */
+	hw->mac.ops.set_lan_id(hw);
+	/* apply the port offset to the address offset */
+	(hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
+			 (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
+	for (i = 0; i < 3; i++) {
+		ret_val = hw->eeprom.ops.read(hw, san_mac_offset,
+					      &san_mac_data);
+		if (ret_val) {
+			hw_err(hw, "eeprom read at offset %d failed\n",
+			       san_mac_offset);
+			goto san_mac_addr_clr;
+		}
+		san_mac_addr[i * 2] = (u8)(san_mac_data);
+		san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
+		san_mac_offset++;
+	}
+	return 0;
+
+san_mac_addr_clr:
+	/* No addresses available in this EEPROM.  It's not necessarily an
+	 * error though, so just wipe the local address and return.
+	 */
+	for (i = 0; i < 6; i++)
+		san_mac_addr[i] = 0xFF;
+	return ret_val;
+}
+
+/**
+ *  ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count
+ *  @hw: pointer to hardware structure
+ *
+ *  Read PCIe configuration space, and get the MSI-X vector count from
+ *  the capabilities table.
+ **/
+u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw)
+{
+	u16 msix_count;
+	u16 max_msix_count;
+	u16 pcie_offset;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		pcie_offset = IXGBE_PCIE_MSIX_82598_CAPS;
+		max_msix_count = IXGBE_MAX_MSIX_VECTORS_82598;
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		pcie_offset = IXGBE_PCIE_MSIX_82599_CAPS;
+		max_msix_count = IXGBE_MAX_MSIX_VECTORS_82599;
+		break;
+	default:
+		return 1;
+	}
+
+	msix_count = ixgbe_read_pci_cfg_word(hw, pcie_offset);
+	if (ixgbe_removed(hw->hw_addr))
+		msix_count = 0;
+	msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
+
+	/* MSI-X count is zero-based in HW */
+	msix_count++;
+
+	if (msix_count > max_msix_count)
+		msix_count = max_msix_count;
+
+	return msix_count;
+}
+
+/**
+ *  ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to disassociate
+ *  @vmdq: VMDq pool index to remove from the rar
+ **/
+s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 mpsar_lo, mpsar_hi;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+	mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+
+	if (ixgbe_removed(hw->hw_addr))
+		return 0;
+
+	if (!mpsar_lo && !mpsar_hi)
+		return 0;
+
+	if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
+		if (mpsar_lo) {
+			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
+			mpsar_lo = 0;
+		}
+		if (mpsar_hi) {
+			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
+			mpsar_hi = 0;
+		}
+	} else if (vmdq < 32) {
+		mpsar_lo &= ~(1 << vmdq);
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
+	} else {
+		mpsar_hi &= ~(1 << (vmdq - 32));
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
+	}
+
+	/* was that the last pool using this rar? */
+	if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
+		hw->mac.ops.clear_rar(hw, rar);
+	return 0;
+}
+
+/**
+ *  ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to associate with a VMDq index
+ *  @vmdq: VMDq pool index
+ **/
+s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 mpsar;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	if (vmdq < 32) {
+		mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+		mpsar |= 1 << vmdq;
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
+	} else {
+		mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+		mpsar |= 1 << (vmdq - 32);
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
+	}
+	return 0;
+}
+
+/**
+ *  This function should only be involved in the IOV mode.
+ *  In IOV mode, Default pool is next pool after the number of
+ *  VFs advertized and not 0.
+ *  MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index]
+ *
+ *  ixgbe_set_vmdq_san_mac - Associate default VMDq pool index with a rx address
+ *  @hw: pointer to hardware struct
+ *  @vmdq: VMDq pool index
+ **/
+s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq)
+{
+	u32 rar = hw->mac.san_mac_rar_index;
+
+	if (vmdq < 32) {
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 1 << vmdq);
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
+	} else {
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 1 << (vmdq - 32));
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
+{
+	int i;
+
+	for (i = 0; i < 128; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *
+ *  return the VLVF index where this VLAN id should be placed
+ *
+ **/
+static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan)
+{
+	u32 bits = 0;
+	u32 first_empty_slot = 0;
+	s32 regindex;
+
+	/* short cut the special case */
+	if (vlan == 0)
+		return 0;
+
+	/*
+	  * Search for the vlan id in the VLVF entries. Save off the first empty
+	  * slot found along the way
+	  */
+	for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
+		bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
+		if (!bits && !(first_empty_slot))
+			first_empty_slot = regindex;
+		else if ((bits & 0x0FFF) == vlan)
+			break;
+	}
+
+	/*
+	  * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan
+	  * in the VLVF. Else use the first empty VLVF register for this
+	  * vlan id.
+	  */
+	if (regindex >= IXGBE_VLVF_ENTRIES) {
+		if (first_empty_slot)
+			regindex = first_empty_slot;
+		else {
+			hw_dbg(hw, "No space in VLVF.\n");
+			regindex = IXGBE_ERR_NO_SPACE;
+		}
+	}
+
+	return regindex;
+}
+
+/**
+ *  ixgbe_set_vfta_generic - Set VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *
+ *  Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+			   bool vlan_on)
+{
+	s32 regindex;
+	u32 bitindex;
+	u32 vfta;
+	u32 bits;
+	u32 vt;
+	u32 targetbit;
+	bool vfta_changed = false;
+
+	if (vlan > 4095)
+		return IXGBE_ERR_PARAM;
+
+	/*
+	 * this is a 2 part operation - first the VFTA, then the
+	 * VLVF and VLVFB if VT Mode is set
+	 * We don't write the VFTA until we know the VLVF part succeeded.
+	 */
+
+	/* Part 1
+	 * The VFTA is a bitstring made up of 128 32-bit registers
+	 * that enable the particular VLAN id, much like the MTA:
+	 *    bits[11-5]: which register
+	 *    bits[4-0]:  which bit in the register
+	 */
+	regindex = (vlan >> 5) & 0x7F;
+	bitindex = vlan & 0x1F;
+	targetbit = (1 << bitindex);
+	vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+
+	if (vlan_on) {
+		if (!(vfta & targetbit)) {
+			vfta |= targetbit;
+			vfta_changed = true;
+		}
+	} else {
+		if ((vfta & targetbit)) {
+			vfta &= ~targetbit;
+			vfta_changed = true;
+		}
+	}
+
+	/* Part 2
+	 * If VT Mode is set
+	 *   Either vlan_on
+	 *     make sure the vlan is in VLVF
+	 *     set the vind bit in the matching VLVFB
+	 *   Or !vlan_on
+	 *     clear the pool bit and possibly the vind
+	 */
+	vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+	if (vt & IXGBE_VT_CTL_VT_ENABLE) {
+		s32 vlvf_index;
+
+		vlvf_index = ixgbe_find_vlvf_slot(hw, vlan);
+		if (vlvf_index < 0)
+			return vlvf_index;
+
+		if (vlan_on) {
+			/* set the pool bit */
+			if (vind < 32) {
+				bits = IXGBE_READ_REG(hw,
+						IXGBE_VLVFB(vlvf_index*2));
+				bits |= (1 << vind);
+				IXGBE_WRITE_REG(hw,
+						IXGBE_VLVFB(vlvf_index*2),
+						bits);
+			} else {
+				bits = IXGBE_READ_REG(hw,
+						IXGBE_VLVFB((vlvf_index*2)+1));
+				bits |= (1 << (vind-32));
+				IXGBE_WRITE_REG(hw,
+						IXGBE_VLVFB((vlvf_index*2)+1),
+						bits);
+			}
+		} else {
+			/* clear the pool bit */
+			if (vind < 32) {
+				bits = IXGBE_READ_REG(hw,
+						IXGBE_VLVFB(vlvf_index*2));
+				bits &= ~(1 << vind);
+				IXGBE_WRITE_REG(hw,
+						IXGBE_VLVFB(vlvf_index*2),
+						bits);
+				bits |= IXGBE_READ_REG(hw,
+						IXGBE_VLVFB((vlvf_index*2)+1));
+			} else {
+				bits = IXGBE_READ_REG(hw,
+						IXGBE_VLVFB((vlvf_index*2)+1));
+				bits &= ~(1 << (vind-32));
+				IXGBE_WRITE_REG(hw,
+						IXGBE_VLVFB((vlvf_index*2)+1),
+						bits);
+				bits |= IXGBE_READ_REG(hw,
+						IXGBE_VLVFB(vlvf_index*2));
+			}
+		}
+
+		/*
+		 * If there are still bits set in the VLVFB registers
+		 * for the VLAN ID indicated we need to see if the
+		 * caller is requesting that we clear the VFTA entry bit.
+		 * If the caller has requested that we clear the VFTA
+		 * entry bit but there are still pools/VFs using this VLAN
+		 * ID entry then ignore the request.  We're not worried
+		 * about the case where we're turning the VFTA VLAN ID
+		 * entry bit on, only when requested to turn it off as
+		 * there may be multiple pools and/or VFs using the
+		 * VLAN ID entry.  In that case we cannot clear the
+		 * VFTA bit until all pools/VFs using that VLAN ID have also
+		 * been cleared.  This will be indicated by "bits" being
+		 * zero.
+		 */
+		if (bits) {
+			IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index),
+					(IXGBE_VLVF_VIEN | vlan));
+			if (!vlan_on) {
+				/* someone wants to clear the vfta entry
+				 * but some pools/VFs are still using it.
+				 * Ignore it. */
+				vfta_changed = false;
+			}
+		} else {
+			IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
+		}
+	}
+
+	if (vfta_changed)
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_clear_vfta_generic - Clear VLAN filter table
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
+{
+	u32 offset;
+
+	for (offset = 0; offset < hw->mac.vft_size; offset++)
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+	for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
+		IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset*2), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset*2)+1), 0);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_check_mac_link_generic - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: true when link is up
+ *  @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+				 bool *link_up, bool link_up_wait_to_complete)
+{
+	u32 links_reg, links_orig;
+	u32 i;
+
+	/* clear the old state */
+	links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
+
+	links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+
+	if (links_orig != links_reg) {
+		hw_dbg(hw, "LINKS changed from %08X to %08X\n",
+		       links_orig, links_reg);
+	}
+
+	if (link_up_wait_to_complete) {
+		for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+			if (links_reg & IXGBE_LINKS_UP) {
+				*link_up = true;
+				break;
+			} else {
+				*link_up = false;
+			}
+			msleep(100);
+			links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+		}
+	} else {
+		if (links_reg & IXGBE_LINKS_UP)
+			*link_up = true;
+		else
+			*link_up = false;
+	}
+
+	switch (links_reg & IXGBE_LINKS_SPEED_82599) {
+	case IXGBE_LINKS_SPEED_10G_82599:
+		if ((hw->mac.type >= ixgbe_mac_X550) &&
+		    (links_reg & IXGBE_LINKS_SPEED_NON_STD))
+			*speed = IXGBE_LINK_SPEED_2_5GB_FULL;
+		else
+			*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		break;
+	case IXGBE_LINKS_SPEED_1G_82599:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		break;
+	case IXGBE_LINKS_SPEED_100_82599:
+		if ((hw->mac.type >= ixgbe_mac_X550) &&
+		    (links_reg & IXGBE_LINKS_SPEED_NON_STD))
+			*speed = IXGBE_LINK_SPEED_5GB_FULL;
+		else
+			*speed = IXGBE_LINK_SPEED_100_FULL;
+		break;
+	default:
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from
+ *  the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @wwnn_prefix: the alternative WWNN prefix
+ *  @wwpn_prefix: the alternative WWPN prefix
+ *
+ *  This function will read the EEPROM from the alternative SAN MAC address
+ *  block to check the support for the alternative WWNN/WWPN prefix support.
+ **/
+s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+					u16 *wwpn_prefix)
+{
+	u16 offset, caps;
+	u16 alt_san_mac_blk_offset;
+
+	/* clear output first */
+	*wwnn_prefix = 0xFFFF;
+	*wwpn_prefix = 0xFFFF;
+
+	/* check if alternative SAN MAC is supported */
+	offset = IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR;
+	if (hw->eeprom.ops.read(hw, offset, &alt_san_mac_blk_offset))
+		goto wwn_prefix_err;
+
+	if ((alt_san_mac_blk_offset == 0) ||
+	    (alt_san_mac_blk_offset == 0xFFFF))
+		return 0;
+
+	/* check capability in alternative san mac address block */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
+	if (hw->eeprom.ops.read(hw, offset, &caps))
+		goto wwn_prefix_err;
+	if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
+		return 0;
+
+	/* get the corresponding prefix for WWNN/WWPN */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
+	if (hw->eeprom.ops.read(hw, offset, wwnn_prefix))
+		hw_err(hw, "eeprom read at offset %d failed\n", offset);
+
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
+	if (hw->eeprom.ops.read(hw, offset, wwpn_prefix))
+		goto wwn_prefix_err;
+
+	return 0;
+
+wwn_prefix_err:
+	hw_err(hw, "eeprom read at offset %d failed\n", offset);
+	return 0;
+}
+
+/**
+ *  ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable switch for anti-spoofing
+ *  @pf: Physical Function pool - do not enable anti-spoofing for the PF
+ *
+ **/
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf)
+{
+	int j;
+	int pf_target_reg = pf >> 3;
+	int pf_target_shift = pf % 8;
+	u32 pfvfspoof = 0;
+
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return;
+
+	if (enable)
+		pfvfspoof = IXGBE_SPOOF_MACAS_MASK;
+
+	/*
+	 * PFVFSPOOF register array is size 8 with 8 bits assigned to
+	 * MAC anti-spoof enables in each register array element.
+	 */
+	for (j = 0; j < pf_target_reg; j++)
+		IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
+
+	/*
+	 * The PF should be allowed to spoof so that it can support
+	 * emulation mode NICs.  Do not set the bits assigned to the PF
+	 */
+	pfvfspoof &= (1 << pf_target_shift) - 1;
+	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
+
+	/*
+	 * Remaining pools belong to the PF so they do not need to have
+	 * anti-spoofing enabled.
+	 */
+	for (j++; j < IXGBE_PFVFSPOOF_REG_COUNT; j++)
+		IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), 0);
+}
+
+/**
+ *  ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable switch for VLAN anti-spoofing
+ *  @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
+ *
+ **/
+void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
+{
+	int vf_target_reg = vf >> 3;
+	int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT;
+	u32 pfvfspoof;
+
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return;
+
+	pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
+	if (enable)
+		pfvfspoof |= (1 << vf_target_shift);
+	else
+		pfvfspoof &= ~(1 << vf_target_shift);
+	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
+}
+
+/**
+ *  ixgbe_get_device_caps_generic - Get additional device capabilities
+ *  @hw: pointer to hardware structure
+ *  @device_caps: the EEPROM word with the extra device capabilities
+ *
+ *  This function will read the EEPROM location for the device capabilities,
+ *  and return the word through device_caps.
+ **/
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps)
+{
+	hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
+
+	return 0;
+}
+
+/**
+ * ixgbe_set_rxpba_generic - Initialize RX packet buffer
+ * @hw: pointer to hardware structure
+ * @num_pb: number of packet buffers to allocate
+ * @headroom: reserve n KB of headroom
+ * @strategy: packet buffer allocation strategy
+ **/
+void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw,
+			     int num_pb,
+			     u32 headroom,
+			     int strategy)
+{
+	u32 pbsize = hw->mac.rx_pb_size;
+	int i = 0;
+	u32 rxpktsize, txpktsize, txpbthresh;
+
+	/* Reserve headroom */
+	pbsize -= headroom;
+
+	if (!num_pb)
+		num_pb = 1;
+
+	/* Divide remaining packet buffer space amongst the number
+	 * of packet buffers requested using supplied strategy.
+	 */
+	switch (strategy) {
+	case (PBA_STRATEGY_WEIGHTED):
+		/* pba_80_48 strategy weight first half of packet buffer with
+		 * 5/8 of the packet buffer space.
+		 */
+		rxpktsize = ((pbsize * 5 * 2) / (num_pb * 8));
+		pbsize -= rxpktsize * (num_pb / 2);
+		rxpktsize <<= IXGBE_RXPBSIZE_SHIFT;
+		for (; i < (num_pb / 2); i++)
+			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+		/* Fall through to configure remaining packet buffers */
+	case (PBA_STRATEGY_EQUAL):
+		/* Divide the remaining Rx packet buffer evenly among the TCs */
+		rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT;
+		for (; i < num_pb; i++)
+			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * Setup Tx packet buffer and threshold equally for all TCs
+	 * TXPBTHRESH register is set in K so divide by 1024 and subtract
+	 * 10 since the largest packet we support is just over 9K.
+	 */
+	txpktsize = IXGBE_TXPBSIZE_MAX / num_pb;
+	txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX;
+	for (i = 0; i < num_pb; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize);
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh);
+	}
+
+	/* Clear unused TCs, if any, to zero buffer size*/
+	for (; i < IXGBE_MAX_PB; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0);
+	}
+}
+
+/**
+ *  ixgbe_calculate_checksum - Calculate checksum for buffer
+ *  @buffer: pointer to EEPROM
+ *  @length: size of EEPROM to calculate a checksum for
+ *
+ *  Calculates the checksum for some buffer on a specified length.  The
+ *  checksum calculated is returned.
+ **/
+static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
+{
+	u32 i;
+	u8 sum = 0;
+
+	if (!buffer)
+		return 0;
+
+	for (i = 0; i < length; i++)
+		sum += buffer[i];
+
+	return (u8) (0 - sum);
+}
+
+/**
+ *  ixgbe_host_interface_command - Issue command to manageability block
+ *  @hw: pointer to the HW structure
+ *  @buffer: contains the command to write and where the return status will
+ *           be placed
+ *  @length: length of buffer, must be multiple of 4 bytes
+ *  @timeout: time in ms to wait for command completion
+ *  @return_data: read and return data from the buffer (true) or not (false)
+ *  Needed because FW structures are big endian and decoding of
+ *  these fields can be 8 bit or 16 bit based on command. Decoding
+ *  is not easily understood without making a table of commands.
+ *  So we will leave this up to the caller to read back the data
+ *  in these cases.
+ *
+ *  Communicates with the manageability block.  On success return 0
+ *  else return IXGBE_ERR_HOST_INTERFACE_COMMAND.
+ **/
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+				 u32 length, u32 timeout,
+				 bool return_data)
+{
+	u32 hicr, i, bi, fwsts;
+	u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
+	u16 buf_len, dword_len;
+
+	if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+		hw_dbg(hw, "Buffer length failure buffersize-%d.\n", length);
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Set bit 9 of FWSTS clearing FW reset indication */
+	fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
+	IXGBE_WRITE_REG(hw, IXGBE_FWSTS, fwsts | IXGBE_FWSTS_FWRI);
+
+	/* Check that the host interface is enabled. */
+	hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
+	if ((hicr & IXGBE_HICR_EN) == 0) {
+		hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n");
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Calculate length in DWORDs. We must be DWORD aligned */
+	if ((length % (sizeof(u32))) != 0) {
+		hw_dbg(hw, "Buffer length failure, not aligned to dword");
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	dword_len = length >> 2;
+
+	/*
+	 * The device driver writes the relevant command block
+	 * into the ram area.
+	 */
+	for (i = 0; i < dword_len; i++)
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+				      i, cpu_to_le32(buffer[i]));
+
+	/* Setting this bit tells the ARC that a new command is pending. */
+	IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C);
+
+	for (i = 0; i < timeout; i++) {
+		hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
+		if (!(hicr & IXGBE_HICR_C))
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	/* Check command successful completion. */
+	if ((timeout != 0 && i == timeout) ||
+	    (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) {
+		hw_dbg(hw, "Command has failed with no status valid.\n");
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	if (!return_data)
+		return 0;
+
+	/* Calculate length in DWORDs */
+	dword_len = hdr_size >> 2;
+
+	/* first pull in the header so we know the buffer length */
+	for (bi = 0; bi < dword_len; bi++) {
+		buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
+		le32_to_cpus(&buffer[bi]);
+	}
+
+	/* If there is any thing in data position pull it in */
+	buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
+	if (buf_len == 0)
+		return 0;
+
+	if (length < (buf_len + hdr_size)) {
+		hw_dbg(hw, "Buffer not large enough for reply message.\n");
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Calculate length in DWORDs, add 3 for odd lengths */
+	dword_len = (buf_len + 3) >> 2;
+
+	/* Pull in the rest of the buffer (bi is where we left off)*/
+	for (; bi <= dword_len; bi++) {
+		buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
+		le32_to_cpus(&buffer[bi]);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware
+ *  @hw: pointer to the HW structure
+ *  @maj: driver version major number
+ *  @min: driver version minor number
+ *  @build: driver version build number
+ *  @sub: driver version sub build number
+ *
+ *  Sends driver version number to firmware through the manageability
+ *  block.  On success return 0
+ *  else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
+ *  semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
+				 u8 build, u8 sub)
+{
+	struct ixgbe_hic_drv_info fw_cmd;
+	int i;
+	s32 ret_val;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM))
+		return IXGBE_ERR_SWFW_SYNC;
+
+	fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
+	fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
+	fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+	fw_cmd.port_num = (u8)hw->bus.func;
+	fw_cmd.ver_maj = maj;
+	fw_cmd.ver_min = min;
+	fw_cmd.ver_build = build;
+	fw_cmd.ver_sub = sub;
+	fw_cmd.hdr.checksum = 0;
+	fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
+				(FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
+	fw_cmd.pad = 0;
+	fw_cmd.pad2 = 0;
+
+	for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+		ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
+						       sizeof(fw_cmd),
+						       IXGBE_HI_COMMAND_TIMEOUT,
+						       true);
+		if (ret_val != 0)
+			continue;
+
+		if (fw_cmd.hdr.cmd_or_resp.ret_status ==
+		    FW_CEM_RESP_STATUS_SUCCESS)
+			ret_val = 0;
+		else
+			ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+
+		break;
+	}
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+	return ret_val;
+}
+
+/**
+ * ixgbe_clear_tx_pending - Clear pending TX work from the PCIe fifo
+ * @hw: pointer to the hardware structure
+ *
+ * The 82599 and x540 MACs can experience issues if TX work is still pending
+ * when a reset occurs.  This function prevents this by flushing the PCIe
+ * buffers on the system.
+ **/
+void ixgbe_clear_tx_pending(struct ixgbe_hw *hw)
+{
+	u32 gcr_ext, hlreg0, i, poll;
+	u16 value;
+
+	/*
+	 * If double reset is not requested then all transactions should
+	 * already be clear and as such there is no work to do
+	 */
+	if (!(hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED))
+		return;
+
+	/*
+	 * Set loopback enable to prevent any transmits from being sent
+	 * should the link come up.  This assumes that the RXCTRL.RXEN bit
+	 * has already been cleared.
+	 */
+	hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0 | IXGBE_HLREG0_LPBK);
+
+	/* wait for a last completion before clearing buffers */
+	IXGBE_WRITE_FLUSH(hw);
+	usleep_range(3000, 6000);
+
+	/* Before proceeding, make sure that the PCIe block does not have
+	 * transactions pending.
+	 */
+	poll = ixgbe_pcie_timeout_poll(hw);
+	for (i = 0; i < poll; i++) {
+		usleep_range(100, 200);
+		value = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_STATUS);
+		if (ixgbe_removed(hw->hw_addr))
+			break;
+		if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
+			break;
+	}
+
+	/* initiate cleaning flow for buffers in the PCIe transaction layer */
+	gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
+	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT,
+			gcr_ext | IXGBE_GCR_EXT_BUFFERS_CLEAR);
+
+	/* Flush all writes and allow 20usec for all transactions to clear */
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(20);
+
+	/* restore previous register values */
+	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
+	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+}
+
+static const u8 ixgbe_emc_temp_data[4] = {
+	IXGBE_EMC_INTERNAL_DATA,
+	IXGBE_EMC_DIODE1_DATA,
+	IXGBE_EMC_DIODE2_DATA,
+	IXGBE_EMC_DIODE3_DATA
+};
+static const u8 ixgbe_emc_therm_limit[4] = {
+	IXGBE_EMC_INTERNAL_THERM_LIMIT,
+	IXGBE_EMC_DIODE1_THERM_LIMIT,
+	IXGBE_EMC_DIODE2_THERM_LIMIT,
+	IXGBE_EMC_DIODE3_THERM_LIMIT
+};
+
+/**
+ *  ixgbe_get_ets_data - Extracts the ETS bit data
+ *  @hw: pointer to hardware structure
+ *  @ets_cfg: extected ETS data
+ *  @ets_offset: offset of ETS data
+ *
+ *  Returns error code.
+ **/
+static s32 ixgbe_get_ets_data(struct ixgbe_hw *hw, u16 *ets_cfg,
+			      u16 *ets_offset)
+{
+	s32 status;
+
+	status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, ets_offset);
+	if (status)
+		return status;
+
+	if ((*ets_offset == 0x0000) || (*ets_offset == 0xFFFF))
+		return IXGBE_NOT_IMPLEMENTED;
+
+	status = hw->eeprom.ops.read(hw, *ets_offset, ets_cfg);
+	if (status)
+		return status;
+
+	if ((*ets_cfg & IXGBE_ETS_TYPE_MASK) != IXGBE_ETS_TYPE_EMC_SHIFTED)
+		return IXGBE_NOT_IMPLEMENTED;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the thermal sensor data structure
+ **/
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  num_sensors;
+	u8  i;
+	struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	/* Only support thermal sensors attached to physical port 0 */
+	if ((IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1))
+		return IXGBE_NOT_IMPLEMENTED;
+
+	status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset);
+	if (status)
+		return status;
+
+	num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+	if (num_sensors > IXGBE_MAX_SENSORS)
+		num_sensors = IXGBE_MAX_SENSORS;
+
+	for (i = 0; i < num_sensors; i++) {
+		u8  sensor_index;
+		u8  sensor_location;
+
+		status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i),
+					     &ets_sensor);
+		if (status)
+			return status;
+
+		sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+				IXGBE_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+				   IXGBE_ETS_DATA_LOC_SHIFT);
+
+		if (sensor_location != 0) {
+			status = hw->phy.ops.read_i2c_byte(hw,
+					ixgbe_emc_temp_data[sensor_index],
+					IXGBE_I2C_THERMAL_SENSOR_ADDR,
+					&data->sensor[i].temp);
+			if (status)
+				return status;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Inits the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  low_thresh_delta;
+	u8  num_sensors;
+	u8  therm_limit;
+	u8  i;
+	struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data));
+
+	/* Only support thermal sensors attached to physical port 0 */
+	if ((IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1))
+		return IXGBE_NOT_IMPLEMENTED;
+
+	status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset);
+	if (status)
+		return status;
+
+	low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >>
+			     IXGBE_ETS_LTHRES_DELTA_SHIFT);
+	num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+	if (num_sensors > IXGBE_MAX_SENSORS)
+		num_sensors = IXGBE_MAX_SENSORS;
+
+	for (i = 0; i < num_sensors; i++) {
+		u8  sensor_index;
+		u8  sensor_location;
+
+		if (hw->eeprom.ops.read(hw, ets_offset + 1 + i, &ets_sensor)) {
+			hw_err(hw, "eeprom read at offset %d failed\n",
+			       ets_offset + 1 + i);
+			continue;
+		}
+		sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+				IXGBE_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+				   IXGBE_ETS_DATA_LOC_SHIFT);
+		therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK;
+
+		hw->phy.ops.write_i2c_byte(hw,
+			ixgbe_emc_therm_limit[sensor_index],
+			IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit);
+
+		if (sensor_location == 0)
+			continue;
+
+		data->sensor[i].location = sensor_location;
+		data->sensor[i].caution_thresh = therm_limit;
+		data->sensor[i].max_op_thresh = therm_limit - low_thresh_delta;
+	}
+
+	return 0;
+}
+
+void ixgbe_disable_rx_generic(struct ixgbe_hw *hw)
+{
+	u32 rxctrl;
+
+	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	if (rxctrl & IXGBE_RXCTRL_RXEN) {
+		if (hw->mac.type != ixgbe_mac_82598EB) {
+			u32 pfdtxgswc;
+
+			pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+			if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
+				pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
+				IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
+				hw->mac.set_lben = true;
+			} else {
+				hw->mac.set_lben = false;
+			}
+		}
+		rxctrl &= ~IXGBE_RXCTRL_RXEN;
+		IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
+	}
+}
+
+void ixgbe_enable_rx_generic(struct ixgbe_hw *hw)
+{
+	u32 rxctrl;
+
+	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, (rxctrl | IXGBE_RXCTRL_RXEN));
+
+	if (hw->mac.type != ixgbe_mac_82598EB) {
+		if (hw->mac.set_lben) {
+			u32 pfdtxgswc;
+
+			pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+			pfdtxgswc |= IXGBE_PFDTXGSWC_VT_LBEN;
+			IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
+			hw->mac.set_lben = false;
+		}
+	}
+}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
new file mode 100644
index 000000000..f21f8a165
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -0,0 +1,210 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_COMMON_H_
+#define _IXGBE_COMMON_H_
+
+#include "ixgbe_type.h"
+#include "ixgbe.h"
+
+u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw);
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
+				  u32 pba_num_size);
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
+enum ixgbe_bus_width ixgbe_convert_bus_width(u16 link_status);
+enum ixgbe_bus_speed ixgbe_convert_bus_speed(u16 link_status);
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
+void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw);
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					       u16 words, u16 *data);
+s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				   u16 words, u16 *data);
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				    u16 words, u16 *data);
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+				       u16 *data);
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					      u16 words, u16 *data);
+s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw);
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+					   u16 *checksum_val);
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+			  u32 enable_addr);
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw,
+				      struct net_device *netdev);
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_disable_rx_buff_generic(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_buff_generic(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw);
+bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw);
+void ixgbe_fc_autoneg(struct ixgbe_hw *hw);
+
+s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u32 mask);
+s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr);
+s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq);
+s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw);
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan,
+			   u32 vind, bool vlan_on);
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw);
+s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw,
+				 ixgbe_link_speed *speed,
+				 bool *link_up, bool link_up_wait_to_complete);
+s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+				 u16 *wwpn_prefix);
+
+s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *, u32 *reg_val);
+s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked);
+
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf);
+void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf);
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps);
+s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
+				 u8 build, u8 ver);
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+				 u32 length, u32 timeout, bool return_data);
+void ixgbe_clear_tx_pending(struct ixgbe_hw *hw);
+bool ixgbe_mng_enabled(struct ixgbe_hw *hw);
+
+void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb,
+			     u32 headroom, int strategy);
+
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR	0xF8
+#define IXGBE_EMC_INTERNAL_DATA		0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT	0x20
+#define IXGBE_EMC_DIODE1_DATA		0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT	0x19
+#define IXGBE_EMC_DIODE2_DATA		0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT	0x1A
+#define IXGBE_EMC_DIODE3_DATA		0x2A
+#define IXGBE_EMC_DIODE3_THERM_LIMIT	0x30
+
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
+void ixgbe_disable_rx_generic(struct ixgbe_hw *hw);
+void ixgbe_enable_rx_generic(struct ixgbe_hw *hw);
+
+#define IXGBE_FAILED_READ_REG 0xffffffffU
+#define IXGBE_FAILED_READ_CFG_DWORD 0xffffffffU
+#define IXGBE_FAILED_READ_CFG_WORD 0xffffU
+
+u16 ixgbe_read_pci_cfg_word(struct ixgbe_hw *hw, u32 reg);
+void ixgbe_write_pci_cfg_word(struct ixgbe_hw *hw, u32 reg, u16 value);
+
+static inline bool ixgbe_removed(void __iomem *addr)
+{
+	return unlikely(!addr);
+}
+
+static inline void ixgbe_write_reg(struct ixgbe_hw *hw, u32 reg, u32 value)
+{
+	u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
+
+	if (ixgbe_removed(reg_addr))
+		return;
+	writel(value, reg_addr + reg);
+}
+#define IXGBE_WRITE_REG(a, reg, value) ixgbe_write_reg((a), (reg), (value))
+
+#ifndef writeq
+#define writeq writeq
+static inline void writeq(u64 val, void __iomem *addr)
+{
+	writel((u32)val, addr);
+	writel((u32)(val >> 32), addr + 4);
+}
+#endif
+
+static inline void ixgbe_write_reg64(struct ixgbe_hw *hw, u32 reg, u64 value)
+{
+	u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
+
+	if (ixgbe_removed(reg_addr))
+		return;
+	writeq(value, reg_addr + reg);
+}
+#define IXGBE_WRITE_REG64(a, reg, value) ixgbe_write_reg64((a), (reg), (value))
+
+u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg);
+#define IXGBE_READ_REG(a, reg) ixgbe_read_reg((a), (reg))
+
+#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) \
+		ixgbe_write_reg((a), (reg) + ((offset) << 2), (value))
+
+#define IXGBE_READ_REG_ARRAY(a, reg, offset) \
+		ixgbe_read_reg((a), (reg) + ((offset) << 2))
+
+#define IXGBE_WRITE_FLUSH(a) ixgbe_read_reg((a), IXGBE_STATUS)
+
+#define ixgbe_hw_to_netdev(hw) (((struct ixgbe_adapter *)(hw)->back)->netdev)
+
+#define hw_dbg(hw, format, arg...) \
+	netdev_dbg(ixgbe_hw_to_netdev(hw), format, ## arg)
+#define hw_err(hw, format, arg...) \
+	netdev_err(ixgbe_hw_to_netdev(hw), format, ## arg)
+#define e_dev_info(format, arg...) \
+	dev_info(&adapter->pdev->dev, format, ## arg)
+#define e_dev_warn(format, arg...) \
+	dev_warn(&adapter->pdev->dev, format, ## arg)
+#define e_dev_err(format, arg...) \
+	dev_err(&adapter->pdev->dev, format, ## arg)
+#define e_dev_notice(format, arg...) \
+	dev_notice(&adapter->pdev->dev, format, ## arg)
+#define e_info(msglvl, format, arg...) \
+	netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_err(msglvl, format, arg...) \
+	netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_warn(msglvl, format, arg...) \
+	netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_crit(msglvl, format, arg...) \
+	netif_crit(adapter, msglvl, adapter->netdev, format, ## arg)
+#endif /* IXGBE_COMMON */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
new file mode 100644
index 000000000..a507a6fe3
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
@@ -0,0 +1,401 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+#include "ixgbe.h"
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82598.h"
+#include "ixgbe_dcb_82599.h"
+
+/**
+ * ixgbe_ieee_credits - This calculates the ieee traffic class
+ * credits from the configured bandwidth percentages. Credits
+ * are the smallest unit programmable into the underlying
+ * hardware. The IEEE 802.1Qaz specification do not use bandwidth
+ * groups so this is much simplified from the CEE case.
+ */
+static s32 ixgbe_ieee_credits(__u8 *bw, __u16 *refill,
+			      __u16 *max, int max_frame)
+{
+	int min_percent = 100;
+	int min_credit, multiplier;
+	int i;
+
+	min_credit = ((max_frame / 2) + DCB_CREDIT_QUANTUM - 1) /
+			DCB_CREDIT_QUANTUM;
+
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		if (bw[i] < min_percent && bw[i])
+			min_percent = bw[i];
+	}
+
+	multiplier = (min_credit / min_percent) + 1;
+
+	/* Find out the hw credits for each TC */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		int val = min(bw[i] * multiplier, MAX_CREDIT_REFILL);
+
+		if (val < min_credit)
+			val = min_credit;
+		refill[i] = val;
+
+		max[i] = bw[i] ? (bw[i] * MAX_CREDIT)/100 : min_credit;
+	}
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_calculate_tc_credits - Calculates traffic class credits
+ * @ixgbe_dcb_config: Struct containing DCB settings.
+ * @direction: Configuring either Tx or Rx.
+ *
+ * This function calculates the credits allocated to each traffic class.
+ * It should be called only after the rules are checked by
+ * ixgbe_dcb_check_config().
+ */
+s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_hw *hw,
+				   struct ixgbe_dcb_config *dcb_config,
+				   int max_frame, u8 direction)
+{
+	struct tc_bw_alloc *p;
+	int min_credit;
+	int min_multiplier;
+	int min_percent = 100;
+	/* Initialization values default for Tx settings */
+	u32 credit_refill       = 0;
+	u32 credit_max          = 0;
+	u16 link_percentage     = 0;
+	u8  bw_percent          = 0;
+	u8  i;
+
+	if (!dcb_config)
+		return DCB_ERR_CONFIG;
+
+	min_credit = ((max_frame / 2) + DCB_CREDIT_QUANTUM - 1) /
+			DCB_CREDIT_QUANTUM;
+
+	/* Find smallest link percentage */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		p = &dcb_config->tc_config[i].path[direction];
+		bw_percent = dcb_config->bw_percentage[direction][p->bwg_id];
+		link_percentage = p->bwg_percent;
+
+		link_percentage = (link_percentage * bw_percent) / 100;
+
+		if (link_percentage && link_percentage < min_percent)
+			min_percent = link_percentage;
+	}
+
+	/*
+	 * The ratio between traffic classes will control the bandwidth
+	 * percentages seen on the wire. To calculate this ratio we use
+	 * a multiplier. It is required that the refill credits must be
+	 * larger than the max frame size so here we find the smallest
+	 * multiplier that will allow all bandwidth percentages to be
+	 * greater than the max frame size.
+	 */
+	min_multiplier = (min_credit / min_percent) + 1;
+
+	/* Find out the link percentage for each TC first */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		p = &dcb_config->tc_config[i].path[direction];
+		bw_percent = dcb_config->bw_percentage[direction][p->bwg_id];
+
+		link_percentage = p->bwg_percent;
+		/* Must be careful of integer division for very small nums */
+		link_percentage = (link_percentage * bw_percent) / 100;
+		if (p->bwg_percent > 0 && link_percentage == 0)
+			link_percentage = 1;
+
+		/* Save link_percentage for reference */
+		p->link_percent = (u8)link_percentage;
+
+		/* Calculate credit refill ratio using multiplier */
+		credit_refill = min(link_percentage * min_multiplier,
+				    MAX_CREDIT_REFILL);
+		p->data_credits_refill = (u16)credit_refill;
+
+		/* Calculate maximum credit for the TC */
+		credit_max = (link_percentage * MAX_CREDIT) / 100;
+
+		/*
+		 * Adjustment based on rule checking, if the percentage
+		 * of a TC is too small, the maximum credit may not be
+		 * enough to send out a jumbo frame in data plane arbitration.
+		 */
+		if (credit_max && (credit_max < min_credit))
+			credit_max = min_credit;
+
+		if (direction == DCB_TX_CONFIG) {
+			/*
+			 * Adjustment based on rule checking, if the
+			 * percentage of a TC is too small, the maximum
+			 * credit may not be enough to send out a TSO
+			 * packet in descriptor plane arbitration.
+			 */
+			if ((hw->mac.type == ixgbe_mac_82598EB) &&
+			    credit_max &&
+			    (credit_max < MINIMUM_CREDIT_FOR_TSO))
+				credit_max = MINIMUM_CREDIT_FOR_TSO;
+
+			dcb_config->tc_config[i].desc_credits_max =
+				(u16)credit_max;
+		}
+
+		p->data_credits_max = (u16)credit_max;
+	}
+
+	return 0;
+}
+
+void ixgbe_dcb_unpack_pfc(struct ixgbe_dcb_config *cfg, u8 *pfc_en)
+{
+	struct tc_configuration *tc_config = &cfg->tc_config[0];
+	int tc;
+
+	for (*pfc_en = 0, tc = 0; tc < MAX_TRAFFIC_CLASS; tc++) {
+		if (tc_config[tc].dcb_pfc != pfc_disabled)
+			*pfc_en |= 1 << tc;
+	}
+}
+
+void ixgbe_dcb_unpack_refill(struct ixgbe_dcb_config *cfg, int direction,
+			     u16 *refill)
+{
+	struct tc_configuration *tc_config = &cfg->tc_config[0];
+	int tc;
+
+	for (tc = 0; tc < MAX_TRAFFIC_CLASS; tc++)
+		refill[tc] = tc_config[tc].path[direction].data_credits_refill;
+}
+
+void ixgbe_dcb_unpack_max(struct ixgbe_dcb_config *cfg, u16 *max)
+{
+	struct tc_configuration *tc_config = &cfg->tc_config[0];
+	int tc;
+
+	for (tc = 0; tc < MAX_TRAFFIC_CLASS; tc++)
+		max[tc] = tc_config[tc].desc_credits_max;
+}
+
+void ixgbe_dcb_unpack_bwgid(struct ixgbe_dcb_config *cfg, int direction,
+			    u8 *bwgid)
+{
+	struct tc_configuration *tc_config = &cfg->tc_config[0];
+	int tc;
+
+	for (tc = 0; tc < MAX_TRAFFIC_CLASS; tc++)
+		bwgid[tc] = tc_config[tc].path[direction].bwg_id;
+}
+
+void ixgbe_dcb_unpack_prio(struct ixgbe_dcb_config *cfg, int direction,
+			    u8 *ptype)
+{
+	struct tc_configuration *tc_config = &cfg->tc_config[0];
+	int tc;
+
+	for (tc = 0; tc < MAX_TRAFFIC_CLASS; tc++)
+		ptype[tc] = tc_config[tc].path[direction].prio_type;
+}
+
+u8 ixgbe_dcb_get_tc_from_up(struct ixgbe_dcb_config *cfg, int direction, u8 up)
+{
+	struct tc_configuration *tc_config = &cfg->tc_config[0];
+	u8 prio_mask = 1 << up;
+	u8 tc = cfg->num_tcs.pg_tcs;
+
+	/* If tc is 0 then DCB is likely not enabled or supported */
+	if (!tc)
+		return 0;
+
+	/*
+	 * Test from maximum TC to 1 and report the first match we find.  If
+	 * we find no match we can assume that the TC is 0 since the TC must
+	 * be set for all user priorities
+	 */
+	for (tc--; tc; tc--) {
+		if (prio_mask & tc_config[tc].path[direction].up_to_tc_bitmap)
+			break;
+	}
+
+	return tc;
+}
+
+void ixgbe_dcb_unpack_map(struct ixgbe_dcb_config *cfg, int direction, u8 *map)
+{
+	u8 up;
+
+	for (up = 0; up < MAX_USER_PRIORITY; up++)
+		map[up] = ixgbe_dcb_get_tc_from_up(cfg, direction, up);
+}
+
+/**
+ * ixgbe_dcb_hw_config - Config and enable DCB
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config(struct ixgbe_hw *hw,
+			struct ixgbe_dcb_config *dcb_config)
+{
+	u8 pfc_en;
+	u8 ptype[MAX_TRAFFIC_CLASS];
+	u8 bwgid[MAX_TRAFFIC_CLASS];
+	u8 prio_tc[MAX_TRAFFIC_CLASS];
+	u16 refill[MAX_TRAFFIC_CLASS];
+	u16 max[MAX_TRAFFIC_CLASS];
+
+	/* Unpack CEE standard containers */
+	ixgbe_dcb_unpack_pfc(dcb_config, &pfc_en);
+	ixgbe_dcb_unpack_refill(dcb_config, DCB_TX_CONFIG, refill);
+	ixgbe_dcb_unpack_max(dcb_config, max);
+	ixgbe_dcb_unpack_bwgid(dcb_config, DCB_TX_CONFIG, bwgid);
+	ixgbe_dcb_unpack_prio(dcb_config, DCB_TX_CONFIG, ptype);
+	ixgbe_dcb_unpack_map(dcb_config, DCB_TX_CONFIG, prio_tc);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		return ixgbe_dcb_hw_config_82598(hw, pfc_en, refill, max,
+						 bwgid, ptype);
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		return ixgbe_dcb_hw_config_82599(hw, pfc_en, refill, max,
+						 bwgid, ptype, prio_tc);
+	default:
+		break;
+	}
+	return 0;
+}
+
+/* Helper routines to abstract HW specifics from DCB netlink ops */
+s32 ixgbe_dcb_hw_pfc_config(struct ixgbe_hw *hw, u8 pfc_en, u8 *prio_tc)
+{
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		return ixgbe_dcb_config_pfc_82598(hw, pfc_en);
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		return ixgbe_dcb_config_pfc_82599(hw, pfc_en, prio_tc);
+	default:
+		break;
+	}
+	return -EINVAL;
+}
+
+s32 ixgbe_dcb_hw_ets(struct ixgbe_hw *hw, struct ieee_ets *ets, int max_frame)
+{
+	__u16 refill[IEEE_8021QAZ_MAX_TCS], max[IEEE_8021QAZ_MAX_TCS];
+	__u8 prio_type[IEEE_8021QAZ_MAX_TCS];
+	int i;
+
+	/* naively give each TC a bwg to map onto CEE hardware */
+	__u8 bwg_id[IEEE_8021QAZ_MAX_TCS] = {0, 1, 2, 3, 4, 5, 6, 7};
+
+	/* Map TSA onto CEE prio type */
+	for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
+		switch (ets->tc_tsa[i]) {
+		case IEEE_8021QAZ_TSA_STRICT:
+			prio_type[i] = 2;
+			break;
+		case IEEE_8021QAZ_TSA_ETS:
+			prio_type[i] = 0;
+			break;
+		default:
+			/* Hardware only supports priority strict or
+			 * ETS transmission selection algorithms if
+			 * we receive some other value from dcbnl
+			 * throw an error
+			 */
+			return -EINVAL;
+		}
+	}
+
+	ixgbe_ieee_credits(ets->tc_tx_bw, refill, max, max_frame);
+	return ixgbe_dcb_hw_ets_config(hw, refill, max,
+				       bwg_id, prio_type, ets->prio_tc);
+}
+
+s32 ixgbe_dcb_hw_ets_config(struct ixgbe_hw *hw,
+			    u16 *refill, u16 *max, u8 *bwg_id,
+			    u8 *prio_type, u8 *prio_tc)
+{
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max,
+							prio_type);
+		ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max,
+							     bwg_id, prio_type);
+		ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max,
+							     bwg_id, prio_type);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max,
+						  bwg_id, prio_type, prio_tc);
+		ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max,
+						       bwg_id, prio_type);
+		ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max, bwg_id,
+						       prio_type, prio_tc);
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static void ixgbe_dcb_read_rtrup2tc_82599(struct ixgbe_hw *hw, u8 *map)
+{
+	u32 reg, i;
+
+	reg = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC);
+	for (i = 0; i < MAX_USER_PRIORITY; i++)
+		map[i] = IXGBE_RTRUP2TC_UP_MASK &
+			(reg >> (i * IXGBE_RTRUP2TC_UP_SHIFT));
+}
+
+void ixgbe_dcb_read_rtrup2tc(struct ixgbe_hw *hw, u8 *map)
+{
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		ixgbe_dcb_read_rtrup2tc_82599(hw, map);
+		break;
+	default:
+		break;
+	}
+}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h
new file mode 100644
index 000000000..fc0a2dd52
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h
@@ -0,0 +1,171 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _DCB_CONFIG_H_
+#define _DCB_CONFIG_H_
+
+#include <linux/dcbnl.h>
+#include "ixgbe_type.h"
+
+/* DCB data structures */
+
+#define IXGBE_MAX_PACKET_BUFFERS 8
+#define MAX_USER_PRIORITY        8
+#define MAX_BW_GROUP             8
+#define BW_PERCENT               100
+
+#define DCB_TX_CONFIG            0
+#define DCB_RX_CONFIG            1
+
+/* DCB error Codes */
+#define DCB_SUCCESS              0
+#define DCB_ERR_CONFIG           -1
+#define DCB_ERR_PARAM            -2
+
+/* Transmit and receive Errors */
+/* Error in bandwidth group allocation */
+#define DCB_ERR_BW_GROUP        -3
+/* Error in traffic class bandwidth allocation */
+#define DCB_ERR_TC_BW           -4
+/* Traffic class has both link strict and group strict enabled */
+#define DCB_ERR_LS_GS           -5
+/* Link strict traffic class has non zero bandwidth */
+#define DCB_ERR_LS_BW_NONZERO   -6
+/* Link strict bandwidth group has non zero bandwidth */
+#define DCB_ERR_LS_BWG_NONZERO  -7
+/*  Traffic class has zero bandwidth */
+#define DCB_ERR_TC_BW_ZERO      -8
+
+#define DCB_NOT_IMPLEMENTED      0x7FFFFFFF
+
+struct dcb_pfc_tc_debug {
+	u8  tc;
+	u8  pause_status;
+	u64 pause_quanta;
+};
+
+enum strict_prio_type {
+	prio_none = 0,
+	prio_group,
+	prio_link
+};
+
+/* DCB capability definitions */
+#define IXGBE_DCB_PG_SUPPORT        0x00000001
+#define IXGBE_DCB_PFC_SUPPORT       0x00000002
+#define IXGBE_DCB_BCN_SUPPORT       0x00000004
+#define IXGBE_DCB_UP2TC_SUPPORT     0x00000008
+#define IXGBE_DCB_GSP_SUPPORT       0x00000010
+
+#define IXGBE_DCB_8_TC_SUPPORT      0x80
+
+struct dcb_support {
+	/* DCB capabilities */
+	u32 capabilities;
+
+	/* Each bit represents a number of TCs configurable in the hw.
+	 * If 8 traffic classes can be configured, the value is 0x80.
+	 */
+	u8  traffic_classes;
+	u8  pfc_traffic_classes;
+};
+
+/* Traffic class bandwidth allocation per direction */
+struct tc_bw_alloc {
+	u8 bwg_id;		  /* Bandwidth Group (BWG) ID */
+	u8 bwg_percent;		  /* % of BWG's bandwidth */
+	u8 link_percent;	  /* % of link bandwidth */
+	u8 up_to_tc_bitmap;	  /* User Priority to Traffic Class mapping */
+	u16 data_credits_refill;  /* Credit refill amount in 64B granularity */
+	u16 data_credits_max;	  /* Max credits for a configured packet buffer
+				   * in 64B granularity.*/
+	enum strict_prio_type prio_type; /* Link or Group Strict Priority */
+};
+
+enum dcb_pfc_type {
+	pfc_disabled = 0,
+	pfc_enabled_full,
+	pfc_enabled_tx,
+	pfc_enabled_rx
+};
+
+/* Traffic class configuration */
+struct tc_configuration {
+	struct tc_bw_alloc path[2]; /* One each for Tx/Rx */
+	enum dcb_pfc_type  dcb_pfc; /* Class based flow control setting */
+
+	u16 desc_credits_max; /* For Tx Descriptor arbitration */
+	u8 tc; /* Traffic class (TC) */
+};
+
+struct dcb_num_tcs {
+	u8 pg_tcs;
+	u8 pfc_tcs;
+};
+
+struct ixgbe_dcb_config {
+	struct dcb_support support;
+	struct dcb_num_tcs num_tcs;
+	struct tc_configuration tc_config[MAX_TRAFFIC_CLASS];
+	u8     bw_percentage[2][MAX_BW_GROUP]; /* One each for Tx/Rx */
+	bool   pfc_mode_enable;
+
+	u32  dcb_cfg_version; /* Not used...OS-specific? */
+	u32  link_speed; /* For bandwidth allocation validation purpose */
+};
+
+/* DCB driver APIs */
+void ixgbe_dcb_unpack_pfc(struct ixgbe_dcb_config *cfg, u8 *pfc_en);
+void ixgbe_dcb_unpack_refill(struct ixgbe_dcb_config *, int, u16 *);
+void ixgbe_dcb_unpack_max(struct ixgbe_dcb_config *, u16 *);
+void ixgbe_dcb_unpack_bwgid(struct ixgbe_dcb_config *, int, u8 *);
+void ixgbe_dcb_unpack_prio(struct ixgbe_dcb_config *, int, u8 *);
+void ixgbe_dcb_unpack_map(struct ixgbe_dcb_config *, int, u8 *);
+u8 ixgbe_dcb_get_tc_from_up(struct ixgbe_dcb_config *, int, u8);
+
+/* DCB credits calculation */
+s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_hw *,
+				   struct ixgbe_dcb_config *, int, u8);
+
+/* DCB hw initialization */
+s32 ixgbe_dcb_hw_ets(struct ixgbe_hw *hw, struct ieee_ets *ets, int max);
+s32 ixgbe_dcb_hw_ets_config(struct ixgbe_hw *hw, u16 *refill, u16 *max,
+			    u8 *bwg_id, u8 *prio_type, u8 *tc_prio);
+s32 ixgbe_dcb_hw_pfc_config(struct ixgbe_hw *hw, u8 pfc_en, u8 *tc_prio);
+s32 ixgbe_dcb_hw_config(struct ixgbe_hw *, struct ixgbe_dcb_config *);
+
+void ixgbe_dcb_read_rtrup2tc(struct ixgbe_hw *hw, u8 *map);
+
+/* DCB definitions for credit calculation */
+#define DCB_CREDIT_QUANTUM	64   /* DCB Quantum */
+#define MAX_CREDIT_REFILL       511  /* 0x1FF * 64B = 32704B */
+#define DCB_MAX_TSO_SIZE        (32*1024) /* MAX TSO packet size supported in DCB mode */
+#define MINIMUM_CREDIT_FOR_TSO  (DCB_MAX_TSO_SIZE/64 + 1) /* 513 for 32KB TSO packet */
+#define MAX_CREDIT              4095 /* Maximum credit supported: 256KB * 1204 / 64B */
+
+#endif /* _DCB_CONFIG_H */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
new file mode 100644
index 000000000..d3ba63f9a
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
@@ -0,0 +1,288 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82598.h"
+
+/**
+ * ixgbe_dcb_config_rx_arbiter_82598 - Config Rx data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Rx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw,
+					u16 *refill,
+					u16 *max,
+					u8 *prio_type)
+{
+	u32    reg           = 0;
+	u32    credit_refill = 0;
+	u32    credit_max    = 0;
+	u8     i             = 0;
+
+	reg = IXGBE_READ_REG(hw, IXGBE_RUPPBMR) | IXGBE_RUPPBMR_MQA;
+	IXGBE_WRITE_REG(hw, IXGBE_RUPPBMR, reg);
+
+	reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+	/* Enable Arbiter */
+	reg &= ~IXGBE_RMCS_ARBDIS;
+	/* Enable Receive Recycle within the BWG */
+	reg |= IXGBE_RMCS_RRM;
+	/* Enable Deficit Fixed Priority arbitration*/
+	reg |= IXGBE_RMCS_DFP;
+
+	IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		credit_refill = refill[i];
+		credit_max    = max[i];
+
+		reg = credit_refill | (credit_max << IXGBE_RT2CR_MCL_SHIFT);
+
+		if (prio_type[i] == prio_link)
+			reg |= IXGBE_RT2CR_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_RT2CR(i), reg);
+	}
+
+	reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+	reg |= IXGBE_RDRXCTL_RDMTS_1_2;
+	reg |= IXGBE_RDRXCTL_MPBEN;
+	reg |= IXGBE_RDRXCTL_MCEN;
+	IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
+
+	reg = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	/* Make sure there is enough descriptors before arbitration */
+	reg &= ~IXGBE_RXCTRL_DMBYPS;
+	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg);
+
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tx_desc_arbiter_82598 - Config Tx Desc. arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Descriptor Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
+						u16 *refill,
+						u16 *max,
+						u8 *bwg_id,
+						u8 *prio_type)
+{
+	u32    reg, max_credits;
+	u8     i;
+
+	reg = IXGBE_READ_REG(hw, IXGBE_DPMCS);
+
+	/* Enable arbiter */
+	reg &= ~IXGBE_DPMCS_ARBDIS;
+	reg |= IXGBE_DPMCS_TSOEF;
+
+	/* Configure Max TSO packet size 34KB including payload and headers */
+	reg |= (0x4 << IXGBE_DPMCS_MTSOS_SHIFT);
+
+	IXGBE_WRITE_REG(hw, IXGBE_DPMCS, reg);
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		max_credits = max[i];
+		reg = max_credits << IXGBE_TDTQ2TCCR_MCL_SHIFT;
+		reg |= refill[i];
+		reg |= (u32)(bwg_id[i]) << IXGBE_TDTQ2TCCR_BWG_SHIFT;
+
+		if (prio_type[i] == prio_group)
+			reg |= IXGBE_TDTQ2TCCR_GSP;
+
+		if (prio_type[i] == prio_link)
+			reg |= IXGBE_TDTQ2TCCR_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_TDTQ2TCCR(i), reg);
+	}
+
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tx_data_arbiter_82598 - Config Tx data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
+						u16 *refill,
+						u16 *max,
+						u8 *bwg_id,
+						u8 *prio_type)
+{
+	u32 reg;
+	u8 i;
+
+	reg = IXGBE_READ_REG(hw, IXGBE_PDPMCS);
+	/* Enable Data Plane Arbiter */
+	reg &= ~IXGBE_PDPMCS_ARBDIS;
+	/* Enable DFP and Transmit Recycle Mode */
+	reg |= (IXGBE_PDPMCS_TPPAC | IXGBE_PDPMCS_TRM);
+
+	IXGBE_WRITE_REG(hw, IXGBE_PDPMCS, reg);
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		reg = refill[i];
+		reg |= (u32)(max[i]) << IXGBE_TDPT2TCCR_MCL_SHIFT;
+		reg |= (u32)(bwg_id[i]) << IXGBE_TDPT2TCCR_BWG_SHIFT;
+
+		if (prio_type[i] == prio_group)
+			reg |= IXGBE_TDPT2TCCR_GSP;
+
+		if (prio_type[i] == prio_link)
+			reg |= IXGBE_TDPT2TCCR_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_TDPT2TCCR(i), reg);
+	}
+
+	/* Enable Tx packet buffer division */
+	reg = IXGBE_READ_REG(hw, IXGBE_DTXCTL);
+	reg |= IXGBE_DTXCTL_ENDBUBD;
+	IXGBE_WRITE_REG(hw, IXGBE_DTXCTL, reg);
+
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_config_pfc_82598 - Config priority flow control
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Priority Flow Control for each traffic class.
+ */
+s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
+{
+	u32 fcrtl, reg;
+	u8  i;
+
+	/* Enable Transmit Priority Flow Control */
+	reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+	reg &= ~IXGBE_RMCS_TFCE_802_3X;
+	reg |= IXGBE_RMCS_TFCE_PRIORITY;
+	IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
+
+	/* Enable Receive Priority Flow Control */
+	reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	reg &= ~(IXGBE_FCTRL_RPFCE | IXGBE_FCTRL_RFCE);
+
+	if (pfc_en)
+		reg |= IXGBE_FCTRL_RPFCE;
+
+	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg);
+
+	/* Configure PFC Tx thresholds per TC */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		if (!(pfc_en & (1 << i))) {
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
+			continue;
+		}
+
+		fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+		reg = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), reg);
+	}
+
+	/* Configure pause time */
+	reg = hw->fc.pause_time * 0x00010001;
+	for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
+		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+	/* Configure flow control refresh threshold value */
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tc_stats_82598 - Configure traffic class statistics
+ * @hw: pointer to hardware structure
+ *
+ * Configure queue statistics registers, all queues belonging to same traffic
+ * class uses a single set of queue statistics counters.
+ */
+static s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
+{
+	u32 reg = 0;
+	u8  i   = 0;
+	u8  j   = 0;
+
+	/* Receive Queues stats setting -  8 queues per statistics reg */
+	for (i = 0, j = 0; i < 15 && j < 8; i = i + 2, j++) {
+		reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i));
+		reg |= ((0x1010101) * j);
+		IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
+		reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i + 1));
+		reg |= ((0x1010101) * j);
+		IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i + 1), reg);
+	}
+	/* Transmit Queues stats setting -  4 queues per statistics reg */
+	for (i = 0; i < 8; i++) {
+		reg = IXGBE_READ_REG(hw, IXGBE_TQSMR(i));
+		reg |= ((0x1010101) * i);
+		IXGBE_WRITE_REG(hw, IXGBE_TQSMR(i), reg);
+	}
+
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_hw_config_82598 - Config and enable DCB
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
+			      u16 *max, u8 *bwg_id, u8 *prio_type)
+{
+	ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, prio_type);
+	ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max,
+					       bwg_id, prio_type);
+	ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max,
+					       bwg_id, prio_type);
+	ixgbe_dcb_config_pfc_82598(hw, pfc_en);
+	ixgbe_dcb_config_tc_stats_82598(hw);
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h
new file mode 100644
index 000000000..3164f5453
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h
@@ -0,0 +1,97 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _DCB_82598_CONFIG_H_
+#define _DCB_82598_CONFIG_H_
+
+/* DCB register definitions */
+
+#define IXGBE_DPMCS_MTSOS_SHIFT 16
+#define IXGBE_DPMCS_TDPAC       0x00000001 /* 0 Round Robin, 1 DFP - Deficit Fixed Priority */
+#define IXGBE_DPMCS_TRM         0x00000010 /* Transmit Recycle Mode */
+#define IXGBE_DPMCS_ARBDIS      0x00000040 /* DCB arbiter disable */
+#define IXGBE_DPMCS_TSOEF       0x00080000 /* TSO Expand Factor: 0=x4, 1=x2 */
+
+#define IXGBE_RUPPBMR_MQA       0x80000000 /* Enable UP to queue mapping */
+
+#define IXGBE_RT2CR_MCL_SHIFT   12 /* Offset to Max Credit Limit setting */
+#define IXGBE_RT2CR_LSP         0x80000000 /* LSP enable bit */
+
+#define IXGBE_RDRXCTL_MPBEN     0x00000010 /* DMA config for multiple packet buffers enable */
+#define IXGBE_RDRXCTL_MCEN      0x00000040 /* DMA config for multiple cores (RSS) enable */
+
+#define IXGBE_TDTQ2TCCR_MCL_SHIFT   12
+#define IXGBE_TDTQ2TCCR_BWG_SHIFT   9
+#define IXGBE_TDTQ2TCCR_GSP     0x40000000
+#define IXGBE_TDTQ2TCCR_LSP     0x80000000
+
+#define IXGBE_TDPT2TCCR_MCL_SHIFT   12
+#define IXGBE_TDPT2TCCR_BWG_SHIFT   9
+#define IXGBE_TDPT2TCCR_GSP     0x40000000
+#define IXGBE_TDPT2TCCR_LSP     0x80000000
+
+#define IXGBE_PDPMCS_TPPAC      0x00000020 /* 0 Round Robin, 1 for DFP - Deficit Fixed Priority */
+#define IXGBE_PDPMCS_ARBDIS     0x00000040 /* Arbiter disable */
+#define IXGBE_PDPMCS_TRM        0x00000100 /* Transmit Recycle Mode enable */
+
+#define IXGBE_DTXCTL_ENDBUBD    0x00000004 /* Enable DBU buffer division */
+
+#define IXGBE_TXPBSIZE_40KB     0x0000A000 /* 40KB Packet Buffer */
+#define IXGBE_RXPBSIZE_48KB     0x0000C000 /* 48KB Packet Buffer */
+#define IXGBE_RXPBSIZE_64KB     0x00010000 /* 64KB Packet Buffer */
+#define IXGBE_RXPBSIZE_80KB     0x00014000 /* 80KB Packet Buffer */
+
+#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000
+
+/* DCB hardware-specific driver APIs */
+
+/* DCB PFC functions */
+s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *, u8 pfc_en);
+
+/* DCB hw initialization */
+s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw,
+					u16 *refill,
+					u16 *max,
+					u8 *prio_type);
+
+s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
+						u16 *refill,
+						u16 *max,
+						u8 *bwg_id,
+						u8 *prio_type);
+
+s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
+						u16 *refill,
+						u16 *max,
+						u8 *bwg_id,
+						u8 *prio_type);
+
+s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
+			      u16 *max, u8 *bwg_id, u8 *prio_type);
+
+#endif /* _DCB_82598_CONFIG_H */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
new file mode 100644
index 000000000..3b932fe64
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
@@ -0,0 +1,363 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82599.h"
+
+/**
+ * ixgbe_dcb_config_rx_arbiter_82599 - Config Rx Data arbiter
+ * @hw: pointer to hardware structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @prio_type: priority type indexed by traffic class
+ *
+ * Configure Rx Packet Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw,
+				      u16 *refill,
+				      u16 *max,
+				      u8 *bwg_id,
+				      u8 *prio_type,
+				      u8 *prio_tc)
+{
+	u32    reg           = 0;
+	u32    credit_refill = 0;
+	u32    credit_max    = 0;
+	u8     i             = 0;
+
+	/*
+	 * Disable the arbiter before changing parameters
+	 * (always enable recycle mode; WSP)
+	 */
+	reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC | IXGBE_RTRPCS_ARBDIS;
+	IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
+
+	/* Map all traffic classes to their UP */
+	reg = 0;
+	for (i = 0; i < MAX_USER_PRIORITY; i++)
+		reg |= (prio_tc[i] << (i * IXGBE_RTRUP2TC_UP_SHIFT));
+	IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg);
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		credit_refill = refill[i];
+		credit_max    = max[i];
+		reg = credit_refill | (credit_max << IXGBE_RTRPT4C_MCL_SHIFT);
+
+		reg |= (u32)(bwg_id[i]) << IXGBE_RTRPT4C_BWG_SHIFT;
+
+		if (prio_type[i] == prio_link)
+			reg |= IXGBE_RTRPT4C_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_RTRPT4C(i), reg);
+	}
+
+	/*
+	 * Configure Rx packet plane (recycle mode; WSP) and
+	 * enable arbiter
+	 */
+	reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC;
+	IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
+
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tx_desc_arbiter_82599 - Config Tx Desc. arbiter
+ * @hw: pointer to hardware structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @prio_type: priority type indexed by traffic class
+ *
+ * Configure Tx Descriptor Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw,
+					   u16 *refill,
+					   u16 *max,
+					   u8 *bwg_id,
+					   u8 *prio_type)
+{
+	u32    reg, max_credits;
+	u8     i;
+
+	/* Clear the per-Tx queue credits; we use per-TC instead */
+	for (i = 0; i < 128; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDT1C, 0);
+	}
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		max_credits = max[i];
+		reg = max_credits << IXGBE_RTTDT2C_MCL_SHIFT;
+		reg |= refill[i];
+		reg |= (u32)(bwg_id[i]) << IXGBE_RTTDT2C_BWG_SHIFT;
+
+		if (prio_type[i] == prio_group)
+			reg |= IXGBE_RTTDT2C_GSP;
+
+		if (prio_type[i] == prio_link)
+			reg |= IXGBE_RTTDT2C_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDT2C(i), reg);
+	}
+
+	/*
+	 * Configure Tx descriptor plane (recycle mode; WSP) and
+	 * enable arbiter
+	 */
+	reg = IXGBE_RTTDCS_TDPAC | IXGBE_RTTDCS_TDRM;
+	IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg);
+
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tx_data_arbiter_82599 - Config Tx Data arbiter
+ * @hw: pointer to hardware structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @prio_type: priority type indexed by traffic class
+ *
+ * Configure Tx Packet Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw,
+					   u16 *refill,
+					   u16 *max,
+					   u8 *bwg_id,
+					   u8 *prio_type,
+					   u8 *prio_tc)
+{
+	u32 reg;
+	u8 i;
+
+	/*
+	 * Disable the arbiter before changing parameters
+	 * (always enable recycle mode; SP; arb delay)
+	 */
+	reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
+	      (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT) |
+	      IXGBE_RTTPCS_ARBDIS;
+	IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
+
+	/* Map all traffic classes to their UP */
+	reg = 0;
+	for (i = 0; i < MAX_USER_PRIORITY; i++)
+		reg |= (prio_tc[i] << (i * IXGBE_RTTUP2TC_UP_SHIFT));
+	IXGBE_WRITE_REG(hw, IXGBE_RTTUP2TC, reg);
+
+	/* Configure traffic class credits and priority */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		reg = refill[i];
+		reg |= (u32)(max[i]) << IXGBE_RTTPT2C_MCL_SHIFT;
+		reg |= (u32)(bwg_id[i]) << IXGBE_RTTPT2C_BWG_SHIFT;
+
+		if (prio_type[i] == prio_group)
+			reg |= IXGBE_RTTPT2C_GSP;
+
+		if (prio_type[i] == prio_link)
+			reg |= IXGBE_RTTPT2C_LSP;
+
+		IXGBE_WRITE_REG(hw, IXGBE_RTTPT2C(i), reg);
+	}
+
+	/*
+	 * Configure Tx packet plane (recycle mode; SP; arb delay) and
+	 * enable arbiter
+	 */
+	reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
+	      (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT);
+	IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
+
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_config_pfc_82599 - Configure priority flow control
+ * @hw: pointer to hardware structure
+ * @pfc_en: enabled pfc bitmask
+ * @prio_tc: priority to tc assignments indexed by priority
+ *
+ * Configure Priority Flow Control (PFC) for each traffic class.
+ */
+s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en, u8 *prio_tc)
+{
+	u32 i, j, fcrtl, reg;
+	u8 max_tc = 0;
+
+	/* Enable Transmit Priority Flow Control */
+	IXGBE_WRITE_REG(hw, IXGBE_FCCFG, IXGBE_FCCFG_TFCE_PRIORITY);
+
+	/* Enable Receive Priority Flow Control */
+	reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+	reg |= IXGBE_MFLCN_DPF;
+
+	/*
+	 * X540 supports per TC Rx priority flow control.  So
+	 * clear all TCs and only enable those that should be
+	 * enabled.
+	 */
+	reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE);
+
+	if (hw->mac.type == ixgbe_mac_X540)
+		reg |= pfc_en << IXGBE_MFLCN_RPFCE_SHIFT;
+
+	if (pfc_en)
+		reg |= IXGBE_MFLCN_RPFCE;
+
+	IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg);
+
+	for (i = 0; i < MAX_USER_PRIORITY; i++) {
+		if (prio_tc[i] > max_tc)
+			max_tc = prio_tc[i];
+	}
+
+
+	/* Configure PFC Tx thresholds per TC */
+	for (i = 0; i <= max_tc; i++) {
+		int enabled = 0;
+
+		for (j = 0; j < MAX_USER_PRIORITY; j++) {
+			if ((prio_tc[j] == i) && (pfc_en & (1 << j))) {
+				enabled = 1;
+				break;
+			}
+		}
+
+		if (enabled) {
+			reg = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+			fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl);
+		} else {
+			reg = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 32;
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
+		}
+
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
+	}
+
+	for (; i < MAX_TRAFFIC_CLASS; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), 0);
+	}
+
+	/* Configure pause time (2 TCs per register) */
+	reg = hw->fc.pause_time * 0x00010001;
+	for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
+		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+	/* Configure flow control refresh threshold value */
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tc_stats_82599 - Config traffic class statistics
+ * @hw: pointer to hardware structure
+ *
+ * Configure queue statistics registers, all queues belonging to same traffic
+ * class uses a single set of queue statistics counters.
+ */
+static s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *hw)
+{
+	u32 reg = 0;
+	u8  i   = 0;
+
+	/*
+	 * Receive Queues stats setting
+	 * 32 RQSMR registers, each configuring 4 queues.
+	 * Set all 16 queues of each TC to the same stat
+	 * with TC 'n' going to stat 'n'.
+	 */
+	for (i = 0; i < 32; i++) {
+		reg = 0x01010101 * (i / 4);
+		IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
+	}
+	/*
+	 * Transmit Queues stats setting
+	 * 32 TQSM registers, each controlling 4 queues.
+	 * Set all queues of each TC to the same stat
+	 * with TC 'n' going to stat 'n'.
+	 * Tx queues are allocated non-uniformly to TCs:
+	 * 32, 32, 16, 16, 8, 8, 8, 8.
+	 */
+	for (i = 0; i < 32; i++) {
+		if (i < 8)
+			reg = 0x00000000;
+		else if (i < 16)
+			reg = 0x01010101;
+		else if (i < 20)
+			reg = 0x02020202;
+		else if (i < 24)
+			reg = 0x03030303;
+		else if (i < 26)
+			reg = 0x04040404;
+		else if (i < 28)
+			reg = 0x05050505;
+		else if (i < 30)
+			reg = 0x06060606;
+		else
+			reg = 0x07070707;
+		IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), reg);
+	}
+
+	return 0;
+}
+
+/**
+ * ixgbe_dcb_hw_config_82599 - Configure and enable DCB
+ * @hw: pointer to hardware structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @prio_type: priority type indexed by traffic class
+ * @pfc_en: enabled pfc bitmask
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
+			      u16 *max, u8 *bwg_id, u8 *prio_type, u8 *prio_tc)
+{
+	ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwg_id,
+					  prio_type, prio_tc);
+	ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max,
+					       bwg_id, prio_type);
+	ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max,
+					       bwg_id, prio_type, prio_tc);
+	ixgbe_dcb_config_pfc_82599(hw, pfc_en, prio_tc);
+	ixgbe_dcb_config_tc_stats_82599(hw);
+
+	return 0;
+}
+
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h
new file mode 100644
index 000000000..90c370230
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h
@@ -0,0 +1,125 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _DCB_82599_CONFIG_H_
+#define _DCB_82599_CONFIG_H_
+
+/* DCB register definitions */
+#define IXGBE_RTTDCS_TDPAC      0x00000001 /* 0 Round Robin,
+					    * 1 WSP - Weighted Strict Priority
+					    */
+#define IXGBE_RTTDCS_VMPAC      0x00000002 /* 0 Round Robin,
+					    * 1 WRR - Weighted Round Robin
+					    */
+#define IXGBE_RTTDCS_TDRM       0x00000010 /* Transmit Recycle Mode */
+#define IXGBE_RTTDCS_ARBDIS     0x00000040 /* DCB arbiter disable */
+#define IXGBE_RTTDCS_BDPM       0x00400000 /* Bypass Data Pipe - must clear! */
+#define IXGBE_RTTDCS_BPBFSM     0x00800000 /* Bypass PB Free Space - must
+					     * clear!
+					     */
+#define IXGBE_RTTDCS_SPEED_CHG  0x80000000 /* Link speed change */
+
+/* Receive UP2TC mapping */
+#define IXGBE_RTRUP2TC_UP_SHIFT 3
+#define IXGBE_RTRUP2TC_UP_MASK	7
+/* Transmit UP2TC mapping */
+#define IXGBE_RTTUP2TC_UP_SHIFT 3
+
+#define IXGBE_RTRPT4C_MCL_SHIFT 12 /* Offset to Max Credit Limit setting */
+#define IXGBE_RTRPT4C_BWG_SHIFT 9  /* Offset to BWG index */
+#define IXGBE_RTRPT4C_GSP       0x40000000 /* GSP enable bit */
+#define IXGBE_RTRPT4C_LSP       0x80000000 /* LSP enable bit */
+
+#define IXGBE_RDRXCTL_MPBEN     0x00000010 /* DMA config for multiple packet
+					    * buffers enable
+					    */
+#define IXGBE_RDRXCTL_MCEN      0x00000040 /* DMA config for multiple cores
+					    * (RSS) enable
+					    */
+
+/* RTRPCS Bit Masks */
+#define IXGBE_RTRPCS_RRM        0x00000002 /* Receive Recycle Mode enable */
+/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
+#define IXGBE_RTRPCS_RAC        0x00000004
+#define IXGBE_RTRPCS_ARBDIS     0x00000040 /* Arbitration disable bit */
+
+/* RTTDT2C Bit Masks */
+#define IXGBE_RTTDT2C_MCL_SHIFT 12
+#define IXGBE_RTTDT2C_BWG_SHIFT 9
+#define IXGBE_RTTDT2C_GSP       0x40000000
+#define IXGBE_RTTDT2C_LSP       0x80000000
+
+#define IXGBE_RTTPT2C_MCL_SHIFT 12
+#define IXGBE_RTTPT2C_BWG_SHIFT 9
+#define IXGBE_RTTPT2C_GSP       0x40000000
+#define IXGBE_RTTPT2C_LSP       0x80000000
+
+/* RTTPCS Bit Masks */
+#define IXGBE_RTTPCS_TPPAC      0x00000020 /* 0 Round Robin,
+					    * 1 SP - Strict Priority
+					    */
+#define IXGBE_RTTPCS_ARBDIS     0x00000040 /* Arbiter disable */
+#define IXGBE_RTTPCS_TPRM       0x00000100 /* Transmit Recycle Mode enable */
+#define IXGBE_RTTPCS_ARBD_SHIFT 22
+#define IXGBE_RTTPCS_ARBD_DCB   0x4        /* Arbitration delay in DCB mode */
+
+/* SECTXMINIFG DCB */
+#define IXGBE_SECTX_DCB		0x00001F00 /* DCB TX Buffer IFG */
+
+
+/* DCB hardware-specific driver APIs */
+
+/* DCB PFC functions */
+s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en, u8 *prio_tc);
+
+/* DCB hw initialization */
+s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw,
+					u16 *refill,
+					u16 *max,
+					u8 *bwg_id,
+					u8 *prio_type,
+					u8 *prio_tc);
+
+s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw,
+						u16 *refill,
+						u16 *max,
+						u8 *bwg_id,
+						u8 *prio_type);
+
+s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw,
+						u16 *refill,
+						u16 *max,
+						u8 *bwg_id,
+						u8 *prio_type,
+						u8 *prio_tc);
+
+s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
+			      u16 *max, u8 *bwg_id, u8 *prio_type,
+			      u8 *prio_tc);
+
+#endif /* _DCB_82599_CONFIG_H */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
new file mode 100644
index 000000000..2707bda37
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
@@ -0,0 +1,809 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include <linux/dcbnl.h>
+#include "ixgbe_dcb_82598.h"
+#include "ixgbe_dcb_82599.h"
+#include "ixgbe_sriov.h"
+
+/* Callbacks for DCB netlink in the kernel */
+#define BIT_DCB_MODE	0x01
+#define BIT_PFC		0x02
+#define BIT_PG_RX	0x04
+#define BIT_PG_TX	0x08
+#define BIT_APP_UPCHG	0x10
+#define BIT_LINKSPEED   0x80
+
+/* Responses for the DCB_C_SET_ALL command */
+#define DCB_HW_CHG_RST  0  /* DCB configuration changed with reset */
+#define DCB_NO_HW_CHG   1  /* DCB configuration did not change */
+#define DCB_HW_CHG      2  /* DCB configuration changed, no reset */
+
+static int ixgbe_copy_dcb_cfg(struct ixgbe_adapter *adapter, int tc_max)
+{
+	struct ixgbe_dcb_config *scfg = &adapter->temp_dcb_cfg;
+	struct ixgbe_dcb_config *dcfg = &adapter->dcb_cfg;
+	struct tc_configuration *src = NULL;
+	struct tc_configuration *dst = NULL;
+	int i, j;
+	int tx = DCB_TX_CONFIG;
+	int rx = DCB_RX_CONFIG;
+	int changes = 0;
+#ifdef IXGBE_FCOE
+	struct dcb_app app = {
+			      .selector = DCB_APP_IDTYPE_ETHTYPE,
+			      .protocol = ETH_P_FCOE,
+			     };
+	u8 up = dcb_getapp(adapter->netdev, &app);
+
+	if (up && !(up & (1 << adapter->fcoe.up)))
+		changes |= BIT_APP_UPCHG;
+#endif
+
+	for (i = DCB_PG_ATTR_TC_0; i < tc_max + DCB_PG_ATTR_TC_0; i++) {
+		src = &scfg->tc_config[i - DCB_PG_ATTR_TC_0];
+		dst = &dcfg->tc_config[i - DCB_PG_ATTR_TC_0];
+
+		if (dst->path[tx].prio_type != src->path[tx].prio_type) {
+			dst->path[tx].prio_type = src->path[tx].prio_type;
+			changes |= BIT_PG_TX;
+		}
+
+		if (dst->path[tx].bwg_id != src->path[tx].bwg_id) {
+			dst->path[tx].bwg_id = src->path[tx].bwg_id;
+			changes |= BIT_PG_TX;
+		}
+
+		if (dst->path[tx].bwg_percent != src->path[tx].bwg_percent) {
+			dst->path[tx].bwg_percent = src->path[tx].bwg_percent;
+			changes |= BIT_PG_TX;
+		}
+
+		if (dst->path[tx].up_to_tc_bitmap !=
+				src->path[tx].up_to_tc_bitmap) {
+			dst->path[tx].up_to_tc_bitmap =
+				src->path[tx].up_to_tc_bitmap;
+			changes |= (BIT_PG_TX | BIT_PFC | BIT_APP_UPCHG);
+		}
+
+		if (dst->path[rx].prio_type != src->path[rx].prio_type) {
+			dst->path[rx].prio_type = src->path[rx].prio_type;
+			changes |= BIT_PG_RX;
+		}
+
+		if (dst->path[rx].bwg_id != src->path[rx].bwg_id) {
+			dst->path[rx].bwg_id = src->path[rx].bwg_id;
+			changes |= BIT_PG_RX;
+		}
+
+		if (dst->path[rx].bwg_percent != src->path[rx].bwg_percent) {
+			dst->path[rx].bwg_percent = src->path[rx].bwg_percent;
+			changes |= BIT_PG_RX;
+		}
+
+		if (dst->path[rx].up_to_tc_bitmap !=
+				src->path[rx].up_to_tc_bitmap) {
+			dst->path[rx].up_to_tc_bitmap =
+				src->path[rx].up_to_tc_bitmap;
+			changes |= (BIT_PG_RX | BIT_PFC | BIT_APP_UPCHG);
+		}
+	}
+
+	for (i = DCB_PG_ATTR_BW_ID_0; i < DCB_PG_ATTR_BW_ID_MAX; i++) {
+		j = i - DCB_PG_ATTR_BW_ID_0;
+		if (dcfg->bw_percentage[tx][j] != scfg->bw_percentage[tx][j]) {
+			dcfg->bw_percentage[tx][j] = scfg->bw_percentage[tx][j];
+			changes |= BIT_PG_TX;
+		}
+		if (dcfg->bw_percentage[rx][j] != scfg->bw_percentage[rx][j]) {
+			dcfg->bw_percentage[rx][j] = scfg->bw_percentage[rx][j];
+			changes |= BIT_PG_RX;
+		}
+	}
+
+	for (i = DCB_PFC_UP_ATTR_0; i < DCB_PFC_UP_ATTR_MAX; i++) {
+		j = i - DCB_PFC_UP_ATTR_0;
+		if (dcfg->tc_config[j].dcb_pfc != scfg->tc_config[j].dcb_pfc) {
+			dcfg->tc_config[j].dcb_pfc = scfg->tc_config[j].dcb_pfc;
+			changes |= BIT_PFC;
+		}
+	}
+
+	if (dcfg->pfc_mode_enable != scfg->pfc_mode_enable) {
+		dcfg->pfc_mode_enable = scfg->pfc_mode_enable;
+		changes |= BIT_PFC;
+	}
+
+	return changes;
+}
+
+static u8 ixgbe_dcbnl_get_state(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED);
+}
+
+static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	/* Fail command if not in CEE mode */
+	if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE))
+		return 1;
+
+	/* verify there is something to do, if not then exit */
+	if (!state == !(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
+		return 0;
+
+	return !!ixgbe_setup_tc(netdev,
+				state ? adapter->dcb_cfg.num_tcs.pg_tcs : 0);
+}
+
+static void ixgbe_dcbnl_get_perm_hw_addr(struct net_device *netdev,
+					 u8 *perm_addr)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	int i, j;
+
+	memset(perm_addr, 0xff, MAX_ADDR_LEN);
+
+	for (i = 0; i < netdev->addr_len; i++)
+		perm_addr[i] = adapter->hw.mac.perm_addr[i];
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+		for (j = 0; j < netdev->addr_len; j++, i++)
+			perm_addr[i] = adapter->hw.mac.san_addr[j];
+		break;
+	default:
+		break;
+	}
+}
+
+static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc,
+					 u8 prio, u8 bwg_id, u8 bw_pct,
+					 u8 up_map)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	if (prio != DCB_ATTR_VALUE_UNDEFINED)
+		adapter->temp_dcb_cfg.tc_config[tc].path[0].prio_type = prio;
+	if (bwg_id != DCB_ATTR_VALUE_UNDEFINED)
+		adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_id = bwg_id;
+	if (bw_pct != DCB_ATTR_VALUE_UNDEFINED)
+		adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_percent =
+			bw_pct;
+	if (up_map != DCB_ATTR_VALUE_UNDEFINED)
+		adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap =
+			up_map;
+}
+
+static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
+					  u8 bw_pct)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] = bw_pct;
+}
+
+static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc,
+					 u8 prio, u8 bwg_id, u8 bw_pct,
+					 u8 up_map)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	if (prio != DCB_ATTR_VALUE_UNDEFINED)
+		adapter->temp_dcb_cfg.tc_config[tc].path[1].prio_type = prio;
+	if (bwg_id != DCB_ATTR_VALUE_UNDEFINED)
+		adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_id = bwg_id;
+	if (bw_pct != DCB_ATTR_VALUE_UNDEFINED)
+		adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_percent =
+			bw_pct;
+	if (up_map != DCB_ATTR_VALUE_UNDEFINED)
+		adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap =
+			up_map;
+}
+
+static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id,
+					  u8 bw_pct)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] = bw_pct;
+}
+
+static void ixgbe_dcbnl_get_pg_tc_cfg_tx(struct net_device *netdev, int tc,
+					 u8 *prio, u8 *bwg_id, u8 *bw_pct,
+					 u8 *up_map)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	*prio = adapter->dcb_cfg.tc_config[tc].path[0].prio_type;
+	*bwg_id = adapter->dcb_cfg.tc_config[tc].path[0].bwg_id;
+	*bw_pct = adapter->dcb_cfg.tc_config[tc].path[0].bwg_percent;
+	*up_map = adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap;
+}
+
+static void ixgbe_dcbnl_get_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
+					  u8 *bw_pct)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	*bw_pct = adapter->dcb_cfg.bw_percentage[0][bwg_id];
+}
+
+static void ixgbe_dcbnl_get_pg_tc_cfg_rx(struct net_device *netdev, int tc,
+					 u8 *prio, u8 *bwg_id, u8 *bw_pct,
+					 u8 *up_map)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	*prio = adapter->dcb_cfg.tc_config[tc].path[1].prio_type;
+	*bwg_id = adapter->dcb_cfg.tc_config[tc].path[1].bwg_id;
+	*bw_pct = adapter->dcb_cfg.tc_config[tc].path[1].bwg_percent;
+	*up_map = adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap;
+}
+
+static void ixgbe_dcbnl_get_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id,
+					  u8 *bw_pct)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	*bw_pct = adapter->dcb_cfg.bw_percentage[1][bwg_id];
+}
+
+static void ixgbe_dcbnl_set_pfc_cfg(struct net_device *netdev, int priority,
+				    u8 setting)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc = setting;
+	if (adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc !=
+	    adapter->dcb_cfg.tc_config[priority].dcb_pfc)
+		adapter->temp_dcb_cfg.pfc_mode_enable = true;
+}
+
+static void ixgbe_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority,
+				    u8 *setting)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	*setting = adapter->dcb_cfg.tc_config[priority].dcb_pfc;
+}
+
+static void ixgbe_dcbnl_devreset(struct net_device *dev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+
+	while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
+		usleep_range(1000, 2000);
+
+	if (netif_running(dev))
+		dev->netdev_ops->ndo_stop(dev);
+
+	ixgbe_clear_interrupt_scheme(adapter);
+	ixgbe_init_interrupt_scheme(adapter);
+
+	if (netif_running(dev))
+		dev->netdev_ops->ndo_open(dev);
+
+	clear_bit(__IXGBE_RESETTING, &adapter->state);
+}
+
+static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_dcb_config *dcb_cfg = &adapter->dcb_cfg;
+	struct ixgbe_hw *hw = &adapter->hw;
+	int ret = DCB_NO_HW_CHG;
+	int i;
+
+	/* Fail command if not in CEE mode */
+	if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE))
+		return DCB_NO_HW_CHG;
+
+	adapter->dcb_set_bitmap |= ixgbe_copy_dcb_cfg(adapter,
+						      MAX_TRAFFIC_CLASS);
+	if (!adapter->dcb_set_bitmap)
+		return DCB_NO_HW_CHG;
+
+	if (adapter->dcb_set_bitmap & (BIT_PG_TX|BIT_PG_RX)) {
+		u16 refill[MAX_TRAFFIC_CLASS], max[MAX_TRAFFIC_CLASS];
+		u8 bwg_id[MAX_TRAFFIC_CLASS], prio_type[MAX_TRAFFIC_CLASS];
+		/* Priority to TC mapping in CEE case default to 1:1 */
+		u8 prio_tc[MAX_USER_PRIORITY];
+		int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+
+#ifdef IXGBE_FCOE
+		if (adapter->netdev->features & NETIF_F_FCOE_MTU)
+			max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
+#endif
+
+		ixgbe_dcb_calculate_tc_credits(hw, dcb_cfg, max_frame,
+					       DCB_TX_CONFIG);
+		ixgbe_dcb_calculate_tc_credits(hw, dcb_cfg, max_frame,
+					       DCB_RX_CONFIG);
+
+		ixgbe_dcb_unpack_refill(dcb_cfg, DCB_TX_CONFIG, refill);
+		ixgbe_dcb_unpack_max(dcb_cfg, max);
+		ixgbe_dcb_unpack_bwgid(dcb_cfg, DCB_TX_CONFIG, bwg_id);
+		ixgbe_dcb_unpack_prio(dcb_cfg, DCB_TX_CONFIG, prio_type);
+		ixgbe_dcb_unpack_map(dcb_cfg, DCB_TX_CONFIG, prio_tc);
+
+		ixgbe_dcb_hw_ets_config(hw, refill, max, bwg_id,
+					prio_type, prio_tc);
+
+		for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
+			netdev_set_prio_tc_map(netdev, i, prio_tc[i]);
+
+		ret = DCB_HW_CHG_RST;
+	}
+
+	if (adapter->dcb_set_bitmap & BIT_PFC) {
+		if (dcb_cfg->pfc_mode_enable) {
+			u8 pfc_en;
+			u8 prio_tc[MAX_USER_PRIORITY];
+
+			ixgbe_dcb_unpack_map(dcb_cfg, DCB_TX_CONFIG, prio_tc);
+			ixgbe_dcb_unpack_pfc(dcb_cfg, &pfc_en);
+			ixgbe_dcb_hw_pfc_config(hw, pfc_en, prio_tc);
+		} else {
+			hw->mac.ops.fc_enable(hw);
+		}
+
+		ixgbe_set_rx_drop_en(adapter);
+
+		ret = DCB_HW_CHG;
+	}
+
+#ifdef IXGBE_FCOE
+	/* Reprogam FCoE hardware offloads when the traffic class
+	 * FCoE is using changes. This happens if the APP info
+	 * changes or the up2tc mapping is updated.
+	 */
+	if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) {
+		struct dcb_app app = {
+				      .selector = DCB_APP_IDTYPE_ETHTYPE,
+				      .protocol = ETH_P_FCOE,
+				     };
+		u8 up = dcb_getapp(netdev, &app);
+
+		adapter->fcoe.up = ffs(up) - 1;
+		ixgbe_dcbnl_devreset(netdev);
+		ret = DCB_HW_CHG_RST;
+	}
+#endif
+
+	adapter->dcb_set_bitmap = 0x00;
+	return ret;
+}
+
+static u8 ixgbe_dcbnl_getcap(struct net_device *netdev, int capid, u8 *cap)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	switch (capid) {
+	case DCB_CAP_ATTR_PG:
+		*cap = true;
+		break;
+	case DCB_CAP_ATTR_PFC:
+		*cap = true;
+		break;
+	case DCB_CAP_ATTR_UP2TC:
+		*cap = false;
+		break;
+	case DCB_CAP_ATTR_PG_TCS:
+		*cap = 0x80;
+		break;
+	case DCB_CAP_ATTR_PFC_TCS:
+		*cap = 0x80;
+		break;
+	case DCB_CAP_ATTR_GSP:
+		*cap = true;
+		break;
+	case DCB_CAP_ATTR_BCN:
+		*cap = false;
+		break;
+	case DCB_CAP_ATTR_DCBX:
+		*cap = adapter->dcbx_cap;
+		break;
+	default:
+		*cap = false;
+		break;
+	}
+
+	return 0;
+}
+
+static int ixgbe_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+		switch (tcid) {
+		case DCB_NUMTCS_ATTR_PG:
+			*num = adapter->dcb_cfg.num_tcs.pg_tcs;
+			break;
+		case DCB_NUMTCS_ATTR_PFC:
+			*num = adapter->dcb_cfg.num_tcs.pfc_tcs;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ixgbe_dcbnl_setnumtcs(struct net_device *netdev, int tcid, u8 num)
+{
+	return -EINVAL;
+}
+
+static u8 ixgbe_dcbnl_getpfcstate(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	return adapter->dcb_cfg.pfc_mode_enable;
+}
+
+static void ixgbe_dcbnl_setpfcstate(struct net_device *netdev, u8 state)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	adapter->temp_dcb_cfg.pfc_mode_enable = state;
+}
+
+/**
+ * ixgbe_dcbnl_getapp - retrieve the DCBX application user priority
+ * @netdev : the corresponding netdev
+ * @idtype : identifies the id as ether type or TCP/UDP port number
+ * @id: id is either ether type or TCP/UDP port number
+ *
+ * Returns : on success, returns a non-zero 802.1p user priority bitmap
+ * otherwise returns -EINVAL as the invalid user priority bitmap to indicate an
+ * error.
+ */
+static int ixgbe_dcbnl_getapp(struct net_device *netdev, u8 idtype, u16 id)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct dcb_app app = {
+				.selector = idtype,
+				.protocol = id,
+			     };
+
+	if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE))
+		return -EINVAL;
+
+	return dcb_getapp(netdev, &app);
+}
+
+static int ixgbe_dcbnl_ieee_getets(struct net_device *dev,
+				   struct ieee_ets *ets)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ieee_ets *my_ets = adapter->ixgbe_ieee_ets;
+
+	ets->ets_cap = adapter->dcb_cfg.num_tcs.pg_tcs;
+
+	/* No IEEE PFC settings available */
+	if (!my_ets)
+		return 0;
+
+	ets->cbs = my_ets->cbs;
+	memcpy(ets->tc_tx_bw, my_ets->tc_tx_bw, sizeof(ets->tc_tx_bw));
+	memcpy(ets->tc_rx_bw, my_ets->tc_rx_bw, sizeof(ets->tc_rx_bw));
+	memcpy(ets->tc_tsa, my_ets->tc_tsa, sizeof(ets->tc_tsa));
+	memcpy(ets->prio_tc, my_ets->prio_tc, sizeof(ets->prio_tc));
+	return 0;
+}
+
+static int ixgbe_dcbnl_ieee_setets(struct net_device *dev,
+				   struct ieee_ets *ets)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
+	int i, err;
+	__u8 max_tc = 0;
+	__u8 map_chg = 0;
+
+	if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
+		return -EINVAL;
+
+	if (!adapter->ixgbe_ieee_ets) {
+		adapter->ixgbe_ieee_ets = kmalloc(sizeof(struct ieee_ets),
+						  GFP_KERNEL);
+		if (!adapter->ixgbe_ieee_ets)
+			return -ENOMEM;
+
+		/* initialize UP2TC mappings to invalid value */
+		for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
+			adapter->ixgbe_ieee_ets->prio_tc[i] =
+				IEEE_8021QAZ_MAX_TCS;
+		/* if possible update UP2TC mappings from HW */
+		ixgbe_dcb_read_rtrup2tc(&adapter->hw,
+					adapter->ixgbe_ieee_ets->prio_tc);
+	}
+
+	for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
+		if (ets->prio_tc[i] > max_tc)
+			max_tc = ets->prio_tc[i];
+		if (ets->prio_tc[i] != adapter->ixgbe_ieee_ets->prio_tc[i])
+			map_chg = 1;
+	}
+
+	memcpy(adapter->ixgbe_ieee_ets, ets, sizeof(*adapter->ixgbe_ieee_ets));
+
+	if (max_tc)
+		max_tc++;
+
+	if (max_tc > adapter->dcb_cfg.num_tcs.pg_tcs)
+		return -EINVAL;
+
+	if (max_tc != netdev_get_num_tc(dev)) {
+		err = ixgbe_setup_tc(dev, max_tc);
+		if (err)
+			return err;
+	} else if (map_chg) {
+		ixgbe_dcbnl_devreset(dev);
+	}
+
+	return ixgbe_dcb_hw_ets(&adapter->hw, ets, max_frame);
+}
+
+static int ixgbe_dcbnl_ieee_getpfc(struct net_device *dev,
+				   struct ieee_pfc *pfc)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ieee_pfc *my_pfc = adapter->ixgbe_ieee_pfc;
+	int i;
+
+	pfc->pfc_cap = adapter->dcb_cfg.num_tcs.pfc_tcs;
+
+	/* No IEEE PFC settings available */
+	if (!my_pfc)
+		return 0;
+
+	pfc->pfc_en = my_pfc->pfc_en;
+	pfc->mbc = my_pfc->mbc;
+	pfc->delay = my_pfc->delay;
+
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		pfc->requests[i] = adapter->stats.pxoffrxc[i];
+		pfc->indications[i] = adapter->stats.pxofftxc[i];
+	}
+
+	return 0;
+}
+
+static int ixgbe_dcbnl_ieee_setpfc(struct net_device *dev,
+				   struct ieee_pfc *pfc)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u8 *prio_tc;
+	int err;
+
+	if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
+		return -EINVAL;
+
+	if (!adapter->ixgbe_ieee_pfc) {
+		adapter->ixgbe_ieee_pfc = kmalloc(sizeof(struct ieee_pfc),
+						  GFP_KERNEL);
+		if (!adapter->ixgbe_ieee_pfc)
+			return -ENOMEM;
+	}
+
+	prio_tc = adapter->ixgbe_ieee_ets->prio_tc;
+	memcpy(adapter->ixgbe_ieee_pfc, pfc, sizeof(*adapter->ixgbe_ieee_pfc));
+
+	/* Enable link flow control parameters if PFC is disabled */
+	if (pfc->pfc_en)
+		err = ixgbe_dcb_hw_pfc_config(hw, pfc->pfc_en, prio_tc);
+	else
+		err = hw->mac.ops.fc_enable(hw);
+
+	ixgbe_set_rx_drop_en(adapter);
+
+	return err;
+}
+
+static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev,
+				   struct dcb_app *app)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	int err;
+
+	if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
+		return -EINVAL;
+
+	err = dcb_ieee_setapp(dev, app);
+	if (err)
+		return err;
+
+#ifdef IXGBE_FCOE
+	if (app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
+	    app->protocol == ETH_P_FCOE) {
+		u8 app_mask = dcb_ieee_getapp_mask(dev, app);
+
+		if (app_mask & (1 << adapter->fcoe.up))
+			return 0;
+
+		adapter->fcoe.up = app->priority;
+		ixgbe_dcbnl_devreset(dev);
+	}
+#endif
+
+	/* VF devices should use default UP when available */
+	if (app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
+	    app->protocol == 0) {
+		int vf;
+
+		adapter->default_up = app->priority;
+
+		for (vf = 0; vf < adapter->num_vfs; vf++) {
+			struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
+
+			if (!vfinfo->pf_qos)
+				ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
+						app->priority, vf);
+		}
+	}
+
+	return 0;
+}
+
+static int ixgbe_dcbnl_ieee_delapp(struct net_device *dev,
+				   struct dcb_app *app)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	int err;
+
+	if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
+		return -EINVAL;
+
+	err = dcb_ieee_delapp(dev, app);
+
+#ifdef IXGBE_FCOE
+	if (!err && app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
+	    app->protocol == ETH_P_FCOE) {
+		u8 app_mask = dcb_ieee_getapp_mask(dev, app);
+
+		if (app_mask & (1 << adapter->fcoe.up))
+			return 0;
+
+		adapter->fcoe.up = app_mask ?
+				   ffs(app_mask) - 1 : IXGBE_FCOE_DEFTC;
+		ixgbe_dcbnl_devreset(dev);
+	}
+#endif
+	/* IF default priority is being removed clear VF default UP */
+	if (app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
+	    app->protocol == 0 && adapter->default_up == app->priority) {
+		int vf;
+		long unsigned int app_mask = dcb_ieee_getapp_mask(dev, app);
+		int qos = app_mask ? find_first_bit(&app_mask, 8) : 0;
+
+		adapter->default_up = qos;
+
+		for (vf = 0; vf < adapter->num_vfs; vf++) {
+			struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
+
+			if (!vfinfo->pf_qos)
+				ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
+						qos, vf);
+		}
+	}
+
+	return err;
+}
+
+static u8 ixgbe_dcbnl_getdcbx(struct net_device *dev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	return adapter->dcbx_cap;
+}
+
+static u8 ixgbe_dcbnl_setdcbx(struct net_device *dev, u8 mode)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ieee_ets ets = {0};
+	struct ieee_pfc pfc = {0};
+	int err = 0;
+
+	/* no support for LLD_MANAGED modes or CEE+IEEE */
+	if ((mode & DCB_CAP_DCBX_LLD_MANAGED) ||
+	    ((mode & DCB_CAP_DCBX_VER_IEEE) && (mode & DCB_CAP_DCBX_VER_CEE)) ||
+	    !(mode & DCB_CAP_DCBX_HOST))
+		return 1;
+
+	if (mode == adapter->dcbx_cap)
+		return 0;
+
+	adapter->dcbx_cap = mode;
+
+	/* ETS and PFC defaults */
+	ets.ets_cap = 8;
+	pfc.pfc_cap = 8;
+
+	if (mode & DCB_CAP_DCBX_VER_IEEE) {
+		ixgbe_dcbnl_ieee_setets(dev, &ets);
+		ixgbe_dcbnl_ieee_setpfc(dev, &pfc);
+	} else if (mode & DCB_CAP_DCBX_VER_CEE) {
+		u8 mask = BIT_PFC | BIT_PG_TX | BIT_PG_RX | BIT_APP_UPCHG;
+
+		adapter->dcb_set_bitmap |= mask;
+		ixgbe_dcbnl_set_all(dev);
+	} else {
+		/* Drop into single TC mode strict priority as this
+		 * indicates CEE and IEEE versions are disabled
+		 */
+		ixgbe_dcbnl_ieee_setets(dev, &ets);
+		ixgbe_dcbnl_ieee_setpfc(dev, &pfc);
+		err = ixgbe_setup_tc(dev, 0);
+	}
+
+	return err ? 1 : 0;
+}
+
+const struct dcbnl_rtnl_ops dcbnl_ops = {
+	.ieee_getets	= ixgbe_dcbnl_ieee_getets,
+	.ieee_setets	= ixgbe_dcbnl_ieee_setets,
+	.ieee_getpfc	= ixgbe_dcbnl_ieee_getpfc,
+	.ieee_setpfc	= ixgbe_dcbnl_ieee_setpfc,
+	.ieee_setapp	= ixgbe_dcbnl_ieee_setapp,
+	.ieee_delapp	= ixgbe_dcbnl_ieee_delapp,
+	.getstate	= ixgbe_dcbnl_get_state,
+	.setstate	= ixgbe_dcbnl_set_state,
+	.getpermhwaddr	= ixgbe_dcbnl_get_perm_hw_addr,
+	.setpgtccfgtx	= ixgbe_dcbnl_set_pg_tc_cfg_tx,
+	.setpgbwgcfgtx	= ixgbe_dcbnl_set_pg_bwg_cfg_tx,
+	.setpgtccfgrx	= ixgbe_dcbnl_set_pg_tc_cfg_rx,
+	.setpgbwgcfgrx	= ixgbe_dcbnl_set_pg_bwg_cfg_rx,
+	.getpgtccfgtx	= ixgbe_dcbnl_get_pg_tc_cfg_tx,
+	.getpgbwgcfgtx	= ixgbe_dcbnl_get_pg_bwg_cfg_tx,
+	.getpgtccfgrx	= ixgbe_dcbnl_get_pg_tc_cfg_rx,
+	.getpgbwgcfgrx	= ixgbe_dcbnl_get_pg_bwg_cfg_rx,
+	.setpfccfg	= ixgbe_dcbnl_set_pfc_cfg,
+	.getpfccfg	= ixgbe_dcbnl_get_pfc_cfg,
+	.setall		= ixgbe_dcbnl_set_all,
+	.getcap		= ixgbe_dcbnl_getcap,
+	.getnumtcs	= ixgbe_dcbnl_getnumtcs,
+	.setnumtcs	= ixgbe_dcbnl_setnumtcs,
+	.getpfcstate	= ixgbe_dcbnl_getpfcstate,
+	.setpfcstate	= ixgbe_dcbnl_setpfcstate,
+	.getapp		= ixgbe_dcbnl_getapp,
+	.getdcbx	= ixgbe_dcbnl_getdcbx,
+	.setdcbx	= ixgbe_dcbnl_setdcbx,
+};
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c
new file mode 100644
index 000000000..5e2c1e35e
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c
@@ -0,0 +1,276 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+#include <linux/debugfs.h>
+#include <linux/module.h>
+
+#include "ixgbe.h"
+
+static struct dentry *ixgbe_dbg_root;
+
+static char ixgbe_dbg_reg_ops_buf[256] = "";
+
+/**
+ * ixgbe_dbg_reg_ops_read - read for reg_ops datum
+ * @filp: the opened file
+ * @buffer: where to write the data for the user to read
+ * @count: the size of the user's buffer
+ * @ppos: file position offset
+ **/
+static ssize_t ixgbe_dbg_reg_ops_read(struct file *filp, char __user *buffer,
+				    size_t count, loff_t *ppos)
+{
+	struct ixgbe_adapter *adapter = filp->private_data;
+	char *buf;
+	int len;
+
+	/* don't allow partial reads */
+	if (*ppos != 0)
+		return 0;
+
+	buf = kasprintf(GFP_KERNEL, "%s: %s\n",
+			adapter->netdev->name,
+			ixgbe_dbg_reg_ops_buf);
+	if (!buf)
+		return -ENOMEM;
+
+	if (count < strlen(buf)) {
+		kfree(buf);
+		return -ENOSPC;
+	}
+
+	len = simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf));
+
+	kfree(buf);
+	return len;
+}
+
+/**
+ * ixgbe_dbg_reg_ops_write - write into reg_ops datum
+ * @filp: the opened file
+ * @buffer: where to find the user's data
+ * @count: the length of the user's data
+ * @ppos: file position offset
+ **/
+static ssize_t ixgbe_dbg_reg_ops_write(struct file *filp,
+				     const char __user *buffer,
+				     size_t count, loff_t *ppos)
+{
+	struct ixgbe_adapter *adapter = filp->private_data;
+	int len;
+
+	/* don't allow partial writes */
+	if (*ppos != 0)
+		return 0;
+	if (count >= sizeof(ixgbe_dbg_reg_ops_buf))
+		return -ENOSPC;
+
+	len = simple_write_to_buffer(ixgbe_dbg_reg_ops_buf,
+				     sizeof(ixgbe_dbg_reg_ops_buf)-1,
+				     ppos,
+				     buffer,
+				     count);
+	if (len < 0)
+		return len;
+
+	ixgbe_dbg_reg_ops_buf[len] = '\0';
+
+	if (strncmp(ixgbe_dbg_reg_ops_buf, "write", 5) == 0) {
+		u32 reg, value;
+		int cnt;
+		cnt = sscanf(&ixgbe_dbg_reg_ops_buf[5], "%x %x", &reg, &value);
+		if (cnt == 2) {
+			IXGBE_WRITE_REG(&adapter->hw, reg, value);
+			value = IXGBE_READ_REG(&adapter->hw, reg);
+			e_dev_info("write: 0x%08x = 0x%08x\n", reg, value);
+		} else {
+			e_dev_info("write <reg> <value>\n");
+		}
+	} else if (strncmp(ixgbe_dbg_reg_ops_buf, "read", 4) == 0) {
+		u32 reg, value;
+		int cnt;
+		cnt = sscanf(&ixgbe_dbg_reg_ops_buf[4], "%x", &reg);
+		if (cnt == 1) {
+			value = IXGBE_READ_REG(&adapter->hw, reg);
+			e_dev_info("read 0x%08x = 0x%08x\n", reg, value);
+		} else {
+			e_dev_info("read <reg>\n");
+		}
+	} else {
+		e_dev_info("Unknown command %s\n", ixgbe_dbg_reg_ops_buf);
+		e_dev_info("Available commands:\n");
+		e_dev_info("   read <reg>\n");
+		e_dev_info("   write <reg> <value>\n");
+	}
+	return count;
+}
+
+static const struct file_operations ixgbe_dbg_reg_ops_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read =  ixgbe_dbg_reg_ops_read,
+	.write = ixgbe_dbg_reg_ops_write,
+};
+
+static char ixgbe_dbg_netdev_ops_buf[256] = "";
+
+/**
+ * ixgbe_dbg_netdev_ops_read - read for netdev_ops datum
+ * @filp: the opened file
+ * @buffer: where to write the data for the user to read
+ * @count: the size of the user's buffer
+ * @ppos: file position offset
+ **/
+static ssize_t ixgbe_dbg_netdev_ops_read(struct file *filp,
+					 char __user *buffer,
+					 size_t count, loff_t *ppos)
+{
+	struct ixgbe_adapter *adapter = filp->private_data;
+	char *buf;
+	int len;
+
+	/* don't allow partial reads */
+	if (*ppos != 0)
+		return 0;
+
+	buf = kasprintf(GFP_KERNEL, "%s: %s\n",
+			adapter->netdev->name,
+			ixgbe_dbg_netdev_ops_buf);
+	if (!buf)
+		return -ENOMEM;
+
+	if (count < strlen(buf)) {
+		kfree(buf);
+		return -ENOSPC;
+	}
+
+	len = simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf));
+
+	kfree(buf);
+	return len;
+}
+
+/**
+ * ixgbe_dbg_netdev_ops_write - write into netdev_ops datum
+ * @filp: the opened file
+ * @buffer: where to find the user's data
+ * @count: the length of the user's data
+ * @ppos: file position offset
+ **/
+static ssize_t ixgbe_dbg_netdev_ops_write(struct file *filp,
+					  const char __user *buffer,
+					  size_t count, loff_t *ppos)
+{
+	struct ixgbe_adapter *adapter = filp->private_data;
+	int len;
+
+	/* don't allow partial writes */
+	if (*ppos != 0)
+		return 0;
+	if (count >= sizeof(ixgbe_dbg_netdev_ops_buf))
+		return -ENOSPC;
+
+	len = simple_write_to_buffer(ixgbe_dbg_netdev_ops_buf,
+				     sizeof(ixgbe_dbg_netdev_ops_buf)-1,
+				     ppos,
+				     buffer,
+				     count);
+	if (len < 0)
+		return len;
+
+	ixgbe_dbg_netdev_ops_buf[len] = '\0';
+
+	if (strncmp(ixgbe_dbg_netdev_ops_buf, "tx_timeout", 10) == 0) {
+		adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);
+		e_dev_info("tx_timeout called\n");
+	} else {
+		e_dev_info("Unknown command: %s\n", ixgbe_dbg_netdev_ops_buf);
+		e_dev_info("Available commands:\n");
+		e_dev_info("    tx_timeout\n");
+	}
+	return count;
+}
+
+static const struct file_operations ixgbe_dbg_netdev_ops_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = ixgbe_dbg_netdev_ops_read,
+	.write = ixgbe_dbg_netdev_ops_write,
+};
+
+/**
+ * ixgbe_dbg_adapter_init - setup the debugfs directory for the adapter
+ * @adapter: the adapter that is starting up
+ **/
+void ixgbe_dbg_adapter_init(struct ixgbe_adapter *adapter)
+{
+	const char *name = pci_name(adapter->pdev);
+	struct dentry *pfile;
+	adapter->ixgbe_dbg_adapter = debugfs_create_dir(name, ixgbe_dbg_root);
+	if (adapter->ixgbe_dbg_adapter) {
+		pfile = debugfs_create_file("reg_ops", 0600,
+					    adapter->ixgbe_dbg_adapter, adapter,
+					    &ixgbe_dbg_reg_ops_fops);
+		if (!pfile)
+			e_dev_err("debugfs reg_ops for %s failed\n", name);
+		pfile = debugfs_create_file("netdev_ops", 0600,
+					    adapter->ixgbe_dbg_adapter, adapter,
+					    &ixgbe_dbg_netdev_ops_fops);
+		if (!pfile)
+			e_dev_err("debugfs netdev_ops for %s failed\n", name);
+	} else {
+		e_dev_err("debugfs entry for %s failed\n", name);
+	}
+}
+
+/**
+ * ixgbe_dbg_adapter_exit - clear out the adapter's debugfs entries
+ * @pf: the pf that is stopping
+ **/
+void ixgbe_dbg_adapter_exit(struct ixgbe_adapter *adapter)
+{
+	debugfs_remove_recursive(adapter->ixgbe_dbg_adapter);
+	adapter->ixgbe_dbg_adapter = NULL;
+}
+
+/**
+ * ixgbe_dbg_init - start up debugfs for the driver
+ **/
+void ixgbe_dbg_init(void)
+{
+	ixgbe_dbg_root = debugfs_create_dir(ixgbe_driver_name, NULL);
+	if (ixgbe_dbg_root == NULL)
+		pr_err("init of debugfs failed\n");
+}
+
+/**
+ * ixgbe_dbg_exit - clean out the driver's debugfs entries
+ **/
+void ixgbe_dbg_exit(void)
+{
+	debugfs_remove_recursive(ixgbe_dbg_root);
+}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
new file mode 100644
index 000000000..eafa9ec80
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -0,0 +1,3165 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for ixgbe */
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/vmalloc.h>
+#include <linux/highmem.h>
+#include <linux/uaccess.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+
+
+#define IXGBE_ALL_RAR_ENTRIES 16
+
+enum {NETDEV_STATS, IXGBE_STATS};
+
+struct ixgbe_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int type;
+	int sizeof_stat;
+	int stat_offset;
+};
+
+#define IXGBE_STAT(m)		IXGBE_STATS, \
+				sizeof(((struct ixgbe_adapter *)0)->m), \
+				offsetof(struct ixgbe_adapter, m)
+#define IXGBE_NETDEV_STAT(m)	NETDEV_STATS, \
+				sizeof(((struct rtnl_link_stats64 *)0)->m), \
+				offsetof(struct rtnl_link_stats64, m)
+
+static const struct ixgbe_stats ixgbe_gstrings_stats[] = {
+	{"rx_packets", IXGBE_NETDEV_STAT(rx_packets)},
+	{"tx_packets", IXGBE_NETDEV_STAT(tx_packets)},
+	{"rx_bytes", IXGBE_NETDEV_STAT(rx_bytes)},
+	{"tx_bytes", IXGBE_NETDEV_STAT(tx_bytes)},
+	{"rx_pkts_nic", IXGBE_STAT(stats.gprc)},
+	{"tx_pkts_nic", IXGBE_STAT(stats.gptc)},
+	{"rx_bytes_nic", IXGBE_STAT(stats.gorc)},
+	{"tx_bytes_nic", IXGBE_STAT(stats.gotc)},
+	{"lsc_int", IXGBE_STAT(lsc_int)},
+	{"tx_busy", IXGBE_STAT(tx_busy)},
+	{"non_eop_descs", IXGBE_STAT(non_eop_descs)},
+	{"rx_errors", IXGBE_NETDEV_STAT(rx_errors)},
+	{"tx_errors", IXGBE_NETDEV_STAT(tx_errors)},
+	{"rx_dropped", IXGBE_NETDEV_STAT(rx_dropped)},
+	{"tx_dropped", IXGBE_NETDEV_STAT(tx_dropped)},
+	{"multicast", IXGBE_NETDEV_STAT(multicast)},
+	{"broadcast", IXGBE_STAT(stats.bprc)},
+	{"rx_no_buffer_count", IXGBE_STAT(stats.rnbc[0]) },
+	{"collisions", IXGBE_NETDEV_STAT(collisions)},
+	{"rx_over_errors", IXGBE_NETDEV_STAT(rx_over_errors)},
+	{"rx_crc_errors", IXGBE_NETDEV_STAT(rx_crc_errors)},
+	{"rx_frame_errors", IXGBE_NETDEV_STAT(rx_frame_errors)},
+	{"hw_rsc_aggregated", IXGBE_STAT(rsc_total_count)},
+	{"hw_rsc_flushed", IXGBE_STAT(rsc_total_flush)},
+	{"fdir_match", IXGBE_STAT(stats.fdirmatch)},
+	{"fdir_miss", IXGBE_STAT(stats.fdirmiss)},
+	{"fdir_overflow", IXGBE_STAT(fdir_overflow)},
+	{"rx_fifo_errors", IXGBE_NETDEV_STAT(rx_fifo_errors)},
+	{"rx_missed_errors", IXGBE_NETDEV_STAT(rx_missed_errors)},
+	{"tx_aborted_errors", IXGBE_NETDEV_STAT(tx_aborted_errors)},
+	{"tx_carrier_errors", IXGBE_NETDEV_STAT(tx_carrier_errors)},
+	{"tx_fifo_errors", IXGBE_NETDEV_STAT(tx_fifo_errors)},
+	{"tx_heartbeat_errors", IXGBE_NETDEV_STAT(tx_heartbeat_errors)},
+	{"tx_timeout_count", IXGBE_STAT(tx_timeout_count)},
+	{"tx_restart_queue", IXGBE_STAT(restart_queue)},
+	{"rx_long_length_errors", IXGBE_STAT(stats.roc)},
+	{"rx_short_length_errors", IXGBE_STAT(stats.ruc)},
+	{"tx_flow_control_xon", IXGBE_STAT(stats.lxontxc)},
+	{"rx_flow_control_xon", IXGBE_STAT(stats.lxonrxc)},
+	{"tx_flow_control_xoff", IXGBE_STAT(stats.lxofftxc)},
+	{"rx_flow_control_xoff", IXGBE_STAT(stats.lxoffrxc)},
+	{"rx_csum_offload_errors", IXGBE_STAT(hw_csum_rx_error)},
+	{"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)},
+	{"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)},
+	{"rx_no_dma_resources", IXGBE_STAT(hw_rx_no_dma_resources)},
+	{"os2bmc_rx_by_bmc", IXGBE_STAT(stats.o2bgptc)},
+	{"os2bmc_tx_by_bmc", IXGBE_STAT(stats.b2ospc)},
+	{"os2bmc_tx_by_host", IXGBE_STAT(stats.o2bspc)},
+	{"os2bmc_rx_by_host", IXGBE_STAT(stats.b2ogprc)},
+#ifdef IXGBE_FCOE
+	{"fcoe_bad_fccrc", IXGBE_STAT(stats.fccrc)},
+	{"rx_fcoe_dropped", IXGBE_STAT(stats.fcoerpdc)},
+	{"rx_fcoe_packets", IXGBE_STAT(stats.fcoeprc)},
+	{"rx_fcoe_dwords", IXGBE_STAT(stats.fcoedwrc)},
+	{"fcoe_noddp", IXGBE_STAT(stats.fcoe_noddp)},
+	{"fcoe_noddp_ext_buff", IXGBE_STAT(stats.fcoe_noddp_ext_buff)},
+	{"tx_fcoe_packets", IXGBE_STAT(stats.fcoeptc)},
+	{"tx_fcoe_dwords", IXGBE_STAT(stats.fcoedwtc)},
+#endif /* IXGBE_FCOE */
+};
+
+/* ixgbe allocates num_tx_queues and num_rx_queues symmetrically so
+ * we set the num_rx_queues to evaluate to num_tx_queues. This is
+ * used because we do not have a good way to get the max number of
+ * rx queues with CONFIG_RPS disabled.
+ */
+#define IXGBE_NUM_RX_QUEUES netdev->num_tx_queues
+
+#define IXGBE_QUEUE_STATS_LEN ( \
+	(netdev->num_tx_queues + IXGBE_NUM_RX_QUEUES) * \
+	(sizeof(struct ixgbe_queue_stats) / sizeof(u64)))
+#define IXGBE_GLOBAL_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_stats)
+#define IXGBE_PB_STATS_LEN ( \
+			(sizeof(((struct ixgbe_adapter *)0)->stats.pxonrxc) + \
+			 sizeof(((struct ixgbe_adapter *)0)->stats.pxontxc) + \
+			 sizeof(((struct ixgbe_adapter *)0)->stats.pxoffrxc) + \
+			 sizeof(((struct ixgbe_adapter *)0)->stats.pxofftxc)) \
+			/ sizeof(u64))
+#define IXGBE_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + \
+			 IXGBE_PB_STATS_LEN + \
+			 IXGBE_QUEUE_STATS_LEN)
+
+static const char ixgbe_gstrings_test[][ETH_GSTRING_LEN] = {
+	"Register test  (offline)", "Eeprom test    (offline)",
+	"Interrupt test (offline)", "Loopback test  (offline)",
+	"Link test   (on/offline)"
+};
+#define IXGBE_TEST_LEN sizeof(ixgbe_gstrings_test) / ETH_GSTRING_LEN
+
+static int ixgbe_get_settings(struct net_device *netdev,
+			      struct ethtool_cmd *ecmd)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	ixgbe_link_speed supported_link;
+	u32 link_speed = 0;
+	bool autoneg = false;
+	bool link_up;
+
+	hw->mac.ops.get_link_capabilities(hw, &supported_link, &autoneg);
+
+	/* set the supported link speeds */
+	if (supported_link & IXGBE_LINK_SPEED_10GB_FULL)
+		ecmd->supported |= SUPPORTED_10000baseT_Full;
+	if (supported_link & IXGBE_LINK_SPEED_1GB_FULL)
+		ecmd->supported |= SUPPORTED_1000baseT_Full;
+	if (supported_link & IXGBE_LINK_SPEED_100_FULL)
+		ecmd->supported |= SUPPORTED_100baseT_Full;
+
+	/* set the advertised speeds */
+	if (hw->phy.autoneg_advertised) {
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+			ecmd->advertising |= ADVERTISED_100baseT_Full;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+			ecmd->advertising |= ADVERTISED_10000baseT_Full;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+			ecmd->advertising |= ADVERTISED_1000baseT_Full;
+	} else {
+		/* default modes in case phy.autoneg_advertised isn't set */
+		if (supported_link & IXGBE_LINK_SPEED_10GB_FULL)
+			ecmd->advertising |= ADVERTISED_10000baseT_Full;
+		if (supported_link & IXGBE_LINK_SPEED_1GB_FULL)
+			ecmd->advertising |= ADVERTISED_1000baseT_Full;
+		if (supported_link & IXGBE_LINK_SPEED_100_FULL)
+			ecmd->advertising |= ADVERTISED_100baseT_Full;
+
+		if (hw->phy.multispeed_fiber && !autoneg) {
+			if (supported_link & IXGBE_LINK_SPEED_10GB_FULL)
+				ecmd->advertising = ADVERTISED_10000baseT_Full;
+		}
+	}
+
+	if (autoneg) {
+		ecmd->supported |= SUPPORTED_Autoneg;
+		ecmd->advertising |= ADVERTISED_Autoneg;
+		ecmd->autoneg = AUTONEG_ENABLE;
+	} else
+		ecmd->autoneg = AUTONEG_DISABLE;
+
+	ecmd->transceiver = XCVR_EXTERNAL;
+
+	/* Determine the remaining settings based on the PHY type. */
+	switch (adapter->hw.phy.type) {
+	case ixgbe_phy_tn:
+	case ixgbe_phy_aq:
+	case ixgbe_phy_cu_unknown:
+		ecmd->supported |= SUPPORTED_TP;
+		ecmd->advertising |= ADVERTISED_TP;
+		ecmd->port = PORT_TP;
+		break;
+	case ixgbe_phy_qt:
+		ecmd->supported |= SUPPORTED_FIBRE;
+		ecmd->advertising |= ADVERTISED_FIBRE;
+		ecmd->port = PORT_FIBRE;
+		break;
+	case ixgbe_phy_nl:
+	case ixgbe_phy_sfp_passive_tyco:
+	case ixgbe_phy_sfp_passive_unknown:
+	case ixgbe_phy_sfp_ftl:
+	case ixgbe_phy_sfp_avago:
+	case ixgbe_phy_sfp_intel:
+	case ixgbe_phy_sfp_unknown:
+		/* SFP+ devices, further checking needed */
+		switch (adapter->hw.phy.sfp_type) {
+		case ixgbe_sfp_type_da_cu:
+		case ixgbe_sfp_type_da_cu_core0:
+		case ixgbe_sfp_type_da_cu_core1:
+			ecmd->supported |= SUPPORTED_FIBRE;
+			ecmd->advertising |= ADVERTISED_FIBRE;
+			ecmd->port = PORT_DA;
+			break;
+		case ixgbe_sfp_type_sr:
+		case ixgbe_sfp_type_lr:
+		case ixgbe_sfp_type_srlr_core0:
+		case ixgbe_sfp_type_srlr_core1:
+		case ixgbe_sfp_type_1g_sx_core0:
+		case ixgbe_sfp_type_1g_sx_core1:
+		case ixgbe_sfp_type_1g_lx_core0:
+		case ixgbe_sfp_type_1g_lx_core1:
+			ecmd->supported |= SUPPORTED_FIBRE;
+			ecmd->advertising |= ADVERTISED_FIBRE;
+			ecmd->port = PORT_FIBRE;
+			break;
+		case ixgbe_sfp_type_not_present:
+			ecmd->supported |= SUPPORTED_FIBRE;
+			ecmd->advertising |= ADVERTISED_FIBRE;
+			ecmd->port = PORT_NONE;
+			break;
+		case ixgbe_sfp_type_1g_cu_core0:
+		case ixgbe_sfp_type_1g_cu_core1:
+			ecmd->supported |= SUPPORTED_TP;
+			ecmd->advertising |= ADVERTISED_TP;
+			ecmd->port = PORT_TP;
+			break;
+		case ixgbe_sfp_type_unknown:
+		default:
+			ecmd->supported |= SUPPORTED_FIBRE;
+			ecmd->advertising |= ADVERTISED_FIBRE;
+			ecmd->port = PORT_OTHER;
+			break;
+		}
+		break;
+	case ixgbe_phy_xaui:
+		ecmd->supported |= SUPPORTED_FIBRE;
+		ecmd->advertising |= ADVERTISED_FIBRE;
+		ecmd->port = PORT_NONE;
+		break;
+	case ixgbe_phy_unknown:
+	case ixgbe_phy_generic:
+	case ixgbe_phy_sfp_unsupported:
+	default:
+		ecmd->supported |= SUPPORTED_FIBRE;
+		ecmd->advertising |= ADVERTISED_FIBRE;
+		ecmd->port = PORT_OTHER;
+		break;
+	}
+
+	hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+	if (link_up) {
+		switch (link_speed) {
+		case IXGBE_LINK_SPEED_10GB_FULL:
+			ethtool_cmd_speed_set(ecmd, SPEED_10000);
+			break;
+		case IXGBE_LINK_SPEED_1GB_FULL:
+			ethtool_cmd_speed_set(ecmd, SPEED_1000);
+			break;
+		case IXGBE_LINK_SPEED_100_FULL:
+			ethtool_cmd_speed_set(ecmd, SPEED_100);
+			break;
+		default:
+			break;
+		}
+		ecmd->duplex = DUPLEX_FULL;
+	} else {
+		ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
+		ecmd->duplex = DUPLEX_UNKNOWN;
+	}
+
+	return 0;
+}
+
+static int ixgbe_set_settings(struct net_device *netdev,
+			      struct ethtool_cmd *ecmd)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 advertised, old;
+	s32 err = 0;
+
+	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
+	    (hw->phy.multispeed_fiber)) {
+		/*
+		 * this function does not support duplex forcing, but can
+		 * limit the advertising of the adapter to the specified speed
+		 */
+		if (ecmd->advertising & ~ecmd->supported)
+			return -EINVAL;
+
+		/* only allow one speed at a time if no autoneg */
+		if (!ecmd->autoneg && hw->phy.multispeed_fiber) {
+			if (ecmd->advertising ==
+			    (ADVERTISED_10000baseT_Full |
+			     ADVERTISED_1000baseT_Full))
+				return -EINVAL;
+		}
+
+		old = hw->phy.autoneg_advertised;
+		advertised = 0;
+		if (ecmd->advertising & ADVERTISED_10000baseT_Full)
+			advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+		if (ecmd->advertising & ADVERTISED_1000baseT_Full)
+			advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+		if (ecmd->advertising & ADVERTISED_100baseT_Full)
+			advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+		if (old == advertised)
+			return err;
+		/* this sets the link speed and restarts auto-neg */
+		while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+			usleep_range(1000, 2000);
+
+		hw->mac.autotry_restart = true;
+		err = hw->mac.ops.setup_link(hw, advertised, true);
+		if (err) {
+			e_info(probe, "setup link failed with code %d\n", err);
+			hw->mac.ops.setup_link(hw, old, true);
+		}
+		clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+	} else {
+		/* in this case we currently only support 10Gb/FULL */
+		u32 speed = ethtool_cmd_speed(ecmd);
+		if ((ecmd->autoneg == AUTONEG_ENABLE) ||
+		    (ecmd->advertising != ADVERTISED_10000baseT_Full) ||
+		    (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
+			return -EINVAL;
+	}
+
+	return err;
+}
+
+static void ixgbe_get_pauseparam(struct net_device *netdev,
+				 struct ethtool_pauseparam *pause)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if (ixgbe_device_supports_autoneg_fc(hw) &&
+	    !hw->fc.disable_fc_autoneg)
+		pause->autoneg = 1;
+	else
+		pause->autoneg = 0;
+
+	if (hw->fc.current_mode == ixgbe_fc_rx_pause) {
+		pause->rx_pause = 1;
+	} else if (hw->fc.current_mode == ixgbe_fc_tx_pause) {
+		pause->tx_pause = 1;
+	} else if (hw->fc.current_mode == ixgbe_fc_full) {
+		pause->rx_pause = 1;
+		pause->tx_pause = 1;
+	}
+}
+
+static int ixgbe_set_pauseparam(struct net_device *netdev,
+				struct ethtool_pauseparam *pause)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_fc_info fc = hw->fc;
+
+	/* 82598 does no support link flow control with DCB enabled */
+	if ((hw->mac.type == ixgbe_mac_82598EB) &&
+	    (adapter->flags & IXGBE_FLAG_DCB_ENABLED))
+		return -EINVAL;
+
+	/* some devices do not support autoneg of link flow control */
+	if ((pause->autoneg == AUTONEG_ENABLE) &&
+	    !ixgbe_device_supports_autoneg_fc(hw))
+		return -EINVAL;
+
+	fc.disable_fc_autoneg = (pause->autoneg != AUTONEG_ENABLE);
+
+	if ((pause->rx_pause && pause->tx_pause) || pause->autoneg)
+		fc.requested_mode = ixgbe_fc_full;
+	else if (pause->rx_pause && !pause->tx_pause)
+		fc.requested_mode = ixgbe_fc_rx_pause;
+	else if (!pause->rx_pause && pause->tx_pause)
+		fc.requested_mode = ixgbe_fc_tx_pause;
+	else
+		fc.requested_mode = ixgbe_fc_none;
+
+	/* if the thing changed then we'll update and use new autoneg */
+	if (memcmp(&fc, &hw->fc, sizeof(struct ixgbe_fc_info))) {
+		hw->fc = fc;
+		if (netif_running(netdev))
+			ixgbe_reinit_locked(adapter);
+		else
+			ixgbe_reset(adapter);
+	}
+
+	return 0;
+}
+
+static u32 ixgbe_get_msglevel(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	return adapter->msg_enable;
+}
+
+static void ixgbe_set_msglevel(struct net_device *netdev, u32 data)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	adapter->msg_enable = data;
+}
+
+static int ixgbe_get_regs_len(struct net_device *netdev)
+{
+#define IXGBE_REGS_LEN  1139
+	return IXGBE_REGS_LEN * sizeof(u32);
+}
+
+#define IXGBE_GET_STAT(_A_, _R_) _A_->stats._R_
+
+static void ixgbe_get_regs(struct net_device *netdev,
+			   struct ethtool_regs *regs, void *p)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 *regs_buff = p;
+	u8 i;
+
+	memset(p, 0, IXGBE_REGS_LEN * sizeof(u32));
+
+	regs->version = hw->mac.type << 24 | hw->revision_id << 16 |
+			hw->device_id;
+
+	/* General Registers */
+	regs_buff[0] = IXGBE_READ_REG(hw, IXGBE_CTRL);
+	regs_buff[1] = IXGBE_READ_REG(hw, IXGBE_STATUS);
+	regs_buff[2] = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+	regs_buff[3] = IXGBE_READ_REG(hw, IXGBE_ESDP);
+	regs_buff[4] = IXGBE_READ_REG(hw, IXGBE_EODSDP);
+	regs_buff[5] = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	regs_buff[6] = IXGBE_READ_REG(hw, IXGBE_FRTIMER);
+	regs_buff[7] = IXGBE_READ_REG(hw, IXGBE_TCPTIMER);
+
+	/* NVM Register */
+	regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_EEC);
+	regs_buff[9] = IXGBE_READ_REG(hw, IXGBE_EERD);
+	regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_FLA);
+	regs_buff[11] = IXGBE_READ_REG(hw, IXGBE_EEMNGCTL);
+	regs_buff[12] = IXGBE_READ_REG(hw, IXGBE_EEMNGDATA);
+	regs_buff[13] = IXGBE_READ_REG(hw, IXGBE_FLMNGCTL);
+	regs_buff[14] = IXGBE_READ_REG(hw, IXGBE_FLMNGDATA);
+	regs_buff[15] = IXGBE_READ_REG(hw, IXGBE_FLMNGCNT);
+	regs_buff[16] = IXGBE_READ_REG(hw, IXGBE_FLOP);
+	regs_buff[17] = IXGBE_READ_REG(hw, IXGBE_GRC);
+
+	/* Interrupt */
+	/* don't read EICR because it can clear interrupt causes, instead
+	 * read EICS which is a shadow but doesn't clear EICR */
+	regs_buff[18] = IXGBE_READ_REG(hw, IXGBE_EICS);
+	regs_buff[19] = IXGBE_READ_REG(hw, IXGBE_EICS);
+	regs_buff[20] = IXGBE_READ_REG(hw, IXGBE_EIMS);
+	regs_buff[21] = IXGBE_READ_REG(hw, IXGBE_EIMC);
+	regs_buff[22] = IXGBE_READ_REG(hw, IXGBE_EIAC);
+	regs_buff[23] = IXGBE_READ_REG(hw, IXGBE_EIAM);
+	regs_buff[24] = IXGBE_READ_REG(hw, IXGBE_EITR(0));
+	regs_buff[25] = IXGBE_READ_REG(hw, IXGBE_IVAR(0));
+	regs_buff[26] = IXGBE_READ_REG(hw, IXGBE_MSIXT);
+	regs_buff[27] = IXGBE_READ_REG(hw, IXGBE_MSIXPBA);
+	regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_PBACL(0));
+	regs_buff[29] = IXGBE_READ_REG(hw, IXGBE_GPIE);
+
+	/* Flow Control */
+	regs_buff[30] = IXGBE_READ_REG(hw, IXGBE_PFCTOP);
+	regs_buff[31] = IXGBE_READ_REG(hw, IXGBE_FCTTV(0));
+	regs_buff[32] = IXGBE_READ_REG(hw, IXGBE_FCTTV(1));
+	regs_buff[33] = IXGBE_READ_REG(hw, IXGBE_FCTTV(2));
+	regs_buff[34] = IXGBE_READ_REG(hw, IXGBE_FCTTV(3));
+	for (i = 0; i < 8; i++) {
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
+			regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL(i));
+			regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH(i));
+			break;
+		case ixgbe_mac_82599EB:
+		case ixgbe_mac_X540:
+		case ixgbe_mac_X550:
+		case ixgbe_mac_X550EM_x:
+			regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL_82599(i));
+			regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH_82599(i));
+			break;
+		default:
+			break;
+		}
+	}
+	regs_buff[51] = IXGBE_READ_REG(hw, IXGBE_FCRTV);
+	regs_buff[52] = IXGBE_READ_REG(hw, IXGBE_TFCS);
+
+	/* Receive DMA */
+	for (i = 0; i < 64; i++)
+		regs_buff[53 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i));
+	for (i = 0; i < 64; i++)
+		regs_buff[117 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i));
+	for (i = 0; i < 64; i++)
+		regs_buff[181 + i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i));
+	for (i = 0; i < 64; i++)
+		regs_buff[245 + i] = IXGBE_READ_REG(hw, IXGBE_RDH(i));
+	for (i = 0; i < 64; i++)
+		regs_buff[309 + i] = IXGBE_READ_REG(hw, IXGBE_RDT(i));
+	for (i = 0; i < 64; i++)
+		regs_buff[373 + i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+	for (i = 0; i < 16; i++)
+		regs_buff[437 + i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
+	for (i = 0; i < 16; i++)
+		regs_buff[453 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+	regs_buff[469] = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+	for (i = 0; i < 8; i++)
+		regs_buff[470 + i] = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
+	regs_buff[478] = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	regs_buff[479] = IXGBE_READ_REG(hw, IXGBE_DROPEN);
+
+	/* Receive */
+	regs_buff[480] = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
+	regs_buff[481] = IXGBE_READ_REG(hw, IXGBE_RFCTL);
+	for (i = 0; i < 16; i++)
+		regs_buff[482 + i] = IXGBE_READ_REG(hw, IXGBE_RAL(i));
+	for (i = 0; i < 16; i++)
+		regs_buff[498 + i] = IXGBE_READ_REG(hw, IXGBE_RAH(i));
+	regs_buff[514] = IXGBE_READ_REG(hw, IXGBE_PSRTYPE(0));
+	regs_buff[515] = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	regs_buff[516] = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+	regs_buff[517] = IXGBE_READ_REG(hw, IXGBE_MCSTCTRL);
+	regs_buff[518] = IXGBE_READ_REG(hw, IXGBE_MRQC);
+	regs_buff[519] = IXGBE_READ_REG(hw, IXGBE_VMD_CTL);
+	for (i = 0; i < 8; i++)
+		regs_buff[520 + i] = IXGBE_READ_REG(hw, IXGBE_IMIR(i));
+	for (i = 0; i < 8; i++)
+		regs_buff[528 + i] = IXGBE_READ_REG(hw, IXGBE_IMIREXT(i));
+	regs_buff[536] = IXGBE_READ_REG(hw, IXGBE_IMIRVP);
+
+	/* Transmit */
+	for (i = 0; i < 32; i++)
+		regs_buff[537 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i));
+	for (i = 0; i < 32; i++)
+		regs_buff[569 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i));
+	for (i = 0; i < 32; i++)
+		regs_buff[601 + i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i));
+	for (i = 0; i < 32; i++)
+		regs_buff[633 + i] = IXGBE_READ_REG(hw, IXGBE_TDH(i));
+	for (i = 0; i < 32; i++)
+		regs_buff[665 + i] = IXGBE_READ_REG(hw, IXGBE_TDT(i));
+	for (i = 0; i < 32; i++)
+		regs_buff[697 + i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
+	for (i = 0; i < 32; i++)
+		regs_buff[729 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAL(i));
+	for (i = 0; i < 32; i++)
+		regs_buff[761 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAH(i));
+	regs_buff[793] = IXGBE_READ_REG(hw, IXGBE_DTXCTL);
+	for (i = 0; i < 16; i++)
+		regs_buff[794 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+	regs_buff[810] = IXGBE_READ_REG(hw, IXGBE_TIPG);
+	for (i = 0; i < 8; i++)
+		regs_buff[811 + i] = IXGBE_READ_REG(hw, IXGBE_TXPBSIZE(i));
+	regs_buff[819] = IXGBE_READ_REG(hw, IXGBE_MNGTXMAP);
+
+	/* Wake Up */
+	regs_buff[820] = IXGBE_READ_REG(hw, IXGBE_WUC);
+	regs_buff[821] = IXGBE_READ_REG(hw, IXGBE_WUFC);
+	regs_buff[822] = IXGBE_READ_REG(hw, IXGBE_WUS);
+	regs_buff[823] = IXGBE_READ_REG(hw, IXGBE_IPAV);
+	regs_buff[824] = IXGBE_READ_REG(hw, IXGBE_IP4AT);
+	regs_buff[825] = IXGBE_READ_REG(hw, IXGBE_IP6AT);
+	regs_buff[826] = IXGBE_READ_REG(hw, IXGBE_WUPL);
+	regs_buff[827] = IXGBE_READ_REG(hw, IXGBE_WUPM);
+	regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT(0));
+
+	/* DCB */
+	regs_buff[829] = IXGBE_READ_REG(hw, IXGBE_RMCS);   /* same as FCCFG  */
+	regs_buff[831] = IXGBE_READ_REG(hw, IXGBE_PDPMCS); /* same as RTTPCS */
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_DPMCS);
+		regs_buff[832] = IXGBE_READ_REG(hw, IXGBE_RUPPBMR);
+		for (i = 0; i < 8; i++)
+			regs_buff[833 + i] =
+				IXGBE_READ_REG(hw, IXGBE_RT2CR(i));
+		for (i = 0; i < 8; i++)
+			regs_buff[841 + i] =
+				IXGBE_READ_REG(hw, IXGBE_RT2SR(i));
+		for (i = 0; i < 8; i++)
+			regs_buff[849 + i] =
+				IXGBE_READ_REG(hw, IXGBE_TDTQ2TCCR(i));
+		for (i = 0; i < 8; i++)
+			regs_buff[857 + i] =
+				IXGBE_READ_REG(hw, IXGBE_TDTQ2TCSR(i));
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+		regs_buff[832] = IXGBE_READ_REG(hw, IXGBE_RTRPCS);
+		for (i = 0; i < 8; i++)
+			regs_buff[833 + i] =
+				IXGBE_READ_REG(hw, IXGBE_RTRPT4C(i));
+		for (i = 0; i < 8; i++)
+			regs_buff[841 + i] =
+				IXGBE_READ_REG(hw, IXGBE_RTRPT4S(i));
+		for (i = 0; i < 8; i++)
+			regs_buff[849 + i] =
+				IXGBE_READ_REG(hw, IXGBE_RTTDT2C(i));
+		for (i = 0; i < 8; i++)
+			regs_buff[857 + i] =
+				IXGBE_READ_REG(hw, IXGBE_RTTDT2S(i));
+		break;
+	default:
+		break;
+	}
+
+	for (i = 0; i < 8; i++)
+		regs_buff[865 + i] =
+		IXGBE_READ_REG(hw, IXGBE_TDPT2TCCR(i)); /* same as RTTPT2C */
+	for (i = 0; i < 8; i++)
+		regs_buff[873 + i] =
+		IXGBE_READ_REG(hw, IXGBE_TDPT2TCSR(i)); /* same as RTTPT2S */
+
+	/* Statistics */
+	regs_buff[881] = IXGBE_GET_STAT(adapter, crcerrs);
+	regs_buff[882] = IXGBE_GET_STAT(adapter, illerrc);
+	regs_buff[883] = IXGBE_GET_STAT(adapter, errbc);
+	regs_buff[884] = IXGBE_GET_STAT(adapter, mspdc);
+	for (i = 0; i < 8; i++)
+		regs_buff[885 + i] = IXGBE_GET_STAT(adapter, mpc[i]);
+	regs_buff[893] = IXGBE_GET_STAT(adapter, mlfc);
+	regs_buff[894] = IXGBE_GET_STAT(adapter, mrfc);
+	regs_buff[895] = IXGBE_GET_STAT(adapter, rlec);
+	regs_buff[896] = IXGBE_GET_STAT(adapter, lxontxc);
+	regs_buff[897] = IXGBE_GET_STAT(adapter, lxonrxc);
+	regs_buff[898] = IXGBE_GET_STAT(adapter, lxofftxc);
+	regs_buff[899] = IXGBE_GET_STAT(adapter, lxoffrxc);
+	for (i = 0; i < 8; i++)
+		regs_buff[900 + i] = IXGBE_GET_STAT(adapter, pxontxc[i]);
+	for (i = 0; i < 8; i++)
+		regs_buff[908 + i] = IXGBE_GET_STAT(adapter, pxonrxc[i]);
+	for (i = 0; i < 8; i++)
+		regs_buff[916 + i] = IXGBE_GET_STAT(adapter, pxofftxc[i]);
+	for (i = 0; i < 8; i++)
+		regs_buff[924 + i] = IXGBE_GET_STAT(adapter, pxoffrxc[i]);
+	regs_buff[932] = IXGBE_GET_STAT(adapter, prc64);
+	regs_buff[933] = IXGBE_GET_STAT(adapter, prc127);
+	regs_buff[934] = IXGBE_GET_STAT(adapter, prc255);
+	regs_buff[935] = IXGBE_GET_STAT(adapter, prc511);
+	regs_buff[936] = IXGBE_GET_STAT(adapter, prc1023);
+	regs_buff[937] = IXGBE_GET_STAT(adapter, prc1522);
+	regs_buff[938] = IXGBE_GET_STAT(adapter, gprc);
+	regs_buff[939] = IXGBE_GET_STAT(adapter, bprc);
+	regs_buff[940] = IXGBE_GET_STAT(adapter, mprc);
+	regs_buff[941] = IXGBE_GET_STAT(adapter, gptc);
+	regs_buff[942] = IXGBE_GET_STAT(adapter, gorc);
+	regs_buff[944] = IXGBE_GET_STAT(adapter, gotc);
+	for (i = 0; i < 8; i++)
+		regs_buff[946 + i] = IXGBE_GET_STAT(adapter, rnbc[i]);
+	regs_buff[954] = IXGBE_GET_STAT(adapter, ruc);
+	regs_buff[955] = IXGBE_GET_STAT(adapter, rfc);
+	regs_buff[956] = IXGBE_GET_STAT(adapter, roc);
+	regs_buff[957] = IXGBE_GET_STAT(adapter, rjc);
+	regs_buff[958] = IXGBE_GET_STAT(adapter, mngprc);
+	regs_buff[959] = IXGBE_GET_STAT(adapter, mngpdc);
+	regs_buff[960] = IXGBE_GET_STAT(adapter, mngptc);
+	regs_buff[961] = IXGBE_GET_STAT(adapter, tor);
+	regs_buff[963] = IXGBE_GET_STAT(adapter, tpr);
+	regs_buff[964] = IXGBE_GET_STAT(adapter, tpt);
+	regs_buff[965] = IXGBE_GET_STAT(adapter, ptc64);
+	regs_buff[966] = IXGBE_GET_STAT(adapter, ptc127);
+	regs_buff[967] = IXGBE_GET_STAT(adapter, ptc255);
+	regs_buff[968] = IXGBE_GET_STAT(adapter, ptc511);
+	regs_buff[969] = IXGBE_GET_STAT(adapter, ptc1023);
+	regs_buff[970] = IXGBE_GET_STAT(adapter, ptc1522);
+	regs_buff[971] = IXGBE_GET_STAT(adapter, mptc);
+	regs_buff[972] = IXGBE_GET_STAT(adapter, bptc);
+	regs_buff[973] = IXGBE_GET_STAT(adapter, xec);
+	for (i = 0; i < 16; i++)
+		regs_buff[974 + i] = IXGBE_GET_STAT(adapter, qprc[i]);
+	for (i = 0; i < 16; i++)
+		regs_buff[990 + i] = IXGBE_GET_STAT(adapter, qptc[i]);
+	for (i = 0; i < 16; i++)
+		regs_buff[1006 + i] = IXGBE_GET_STAT(adapter, qbrc[i]);
+	for (i = 0; i < 16; i++)
+		regs_buff[1022 + i] = IXGBE_GET_STAT(adapter, qbtc[i]);
+
+	/* MAC */
+	regs_buff[1038] = IXGBE_READ_REG(hw, IXGBE_PCS1GCFIG);
+	regs_buff[1039] = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
+	regs_buff[1040] = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+	regs_buff[1041] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG0);
+	regs_buff[1042] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG1);
+	regs_buff[1043] = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+	regs_buff[1044] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+	regs_buff[1045] = IXGBE_READ_REG(hw, IXGBE_PCS1GANNP);
+	regs_buff[1046] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLPNP);
+	regs_buff[1047] = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+	regs_buff[1048] = IXGBE_READ_REG(hw, IXGBE_HLREG1);
+	regs_buff[1049] = IXGBE_READ_REG(hw, IXGBE_PAP);
+	regs_buff[1050] = IXGBE_READ_REG(hw, IXGBE_MACA);
+	regs_buff[1051] = IXGBE_READ_REG(hw, IXGBE_APAE);
+	regs_buff[1052] = IXGBE_READ_REG(hw, IXGBE_ARD);
+	regs_buff[1053] = IXGBE_READ_REG(hw, IXGBE_AIS);
+	regs_buff[1054] = IXGBE_READ_REG(hw, IXGBE_MSCA);
+	regs_buff[1055] = IXGBE_READ_REG(hw, IXGBE_MSRWD);
+	regs_buff[1056] = IXGBE_READ_REG(hw, IXGBE_MLADD);
+	regs_buff[1057] = IXGBE_READ_REG(hw, IXGBE_MHADD);
+	regs_buff[1058] = IXGBE_READ_REG(hw, IXGBE_TREG);
+	regs_buff[1059] = IXGBE_READ_REG(hw, IXGBE_PCSS1);
+	regs_buff[1060] = IXGBE_READ_REG(hw, IXGBE_PCSS2);
+	regs_buff[1061] = IXGBE_READ_REG(hw, IXGBE_XPCSS);
+	regs_buff[1062] = IXGBE_READ_REG(hw, IXGBE_SERDESC);
+	regs_buff[1063] = IXGBE_READ_REG(hw, IXGBE_MACS);
+	regs_buff[1064] = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	regs_buff[1065] = IXGBE_READ_REG(hw, IXGBE_LINKS);
+	regs_buff[1066] = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	regs_buff[1067] = IXGBE_READ_REG(hw, IXGBE_AUTOC3);
+	regs_buff[1068] = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+	regs_buff[1069] = IXGBE_READ_REG(hw, IXGBE_ANLP2);
+	regs_buff[1070] = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
+
+	/* Diagnostic */
+	regs_buff[1071] = IXGBE_READ_REG(hw, IXGBE_RDSTATCTL);
+	for (i = 0; i < 8; i++)
+		regs_buff[1072 + i] = IXGBE_READ_REG(hw, IXGBE_RDSTAT(i));
+	regs_buff[1080] = IXGBE_READ_REG(hw, IXGBE_RDHMPN);
+	for (i = 0; i < 4; i++)
+		regs_buff[1081 + i] = IXGBE_READ_REG(hw, IXGBE_RIC_DW(i));
+	regs_buff[1085] = IXGBE_READ_REG(hw, IXGBE_RDPROBE);
+	regs_buff[1086] = IXGBE_READ_REG(hw, IXGBE_TDSTATCTL);
+	for (i = 0; i < 8; i++)
+		regs_buff[1087 + i] = IXGBE_READ_REG(hw, IXGBE_TDSTAT(i));
+	regs_buff[1095] = IXGBE_READ_REG(hw, IXGBE_TDHMPN);
+	for (i = 0; i < 4; i++)
+		regs_buff[1096 + i] = IXGBE_READ_REG(hw, IXGBE_TIC_DW(i));
+	regs_buff[1100] = IXGBE_READ_REG(hw, IXGBE_TDPROBE);
+	regs_buff[1101] = IXGBE_READ_REG(hw, IXGBE_TXBUFCTRL);
+	regs_buff[1102] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA0);
+	regs_buff[1103] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA1);
+	regs_buff[1104] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA2);
+	regs_buff[1105] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA3);
+	regs_buff[1106] = IXGBE_READ_REG(hw, IXGBE_RXBUFCTRL);
+	regs_buff[1107] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA0);
+	regs_buff[1108] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA1);
+	regs_buff[1109] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA2);
+	regs_buff[1110] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA3);
+	for (i = 0; i < 8; i++)
+		regs_buff[1111 + i] = IXGBE_READ_REG(hw, IXGBE_PCIE_DIAG(i));
+	regs_buff[1119] = IXGBE_READ_REG(hw, IXGBE_RFVAL);
+	regs_buff[1120] = IXGBE_READ_REG(hw, IXGBE_MDFTC1);
+	regs_buff[1121] = IXGBE_READ_REG(hw, IXGBE_MDFTC2);
+	regs_buff[1122] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO1);
+	regs_buff[1123] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO2);
+	regs_buff[1124] = IXGBE_READ_REG(hw, IXGBE_MDFTS);
+	regs_buff[1125] = IXGBE_READ_REG(hw, IXGBE_PCIEECCCTL);
+	regs_buff[1126] = IXGBE_READ_REG(hw, IXGBE_PBTXECC);
+	regs_buff[1127] = IXGBE_READ_REG(hw, IXGBE_PBRXECC);
+
+	/* 82599 X540 specific registers  */
+	regs_buff[1128] = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+
+	/* 82599 X540 specific DCB registers  */
+	regs_buff[1129] = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC);
+	regs_buff[1130] = IXGBE_READ_REG(hw, IXGBE_RTTUP2TC);
+	for (i = 0; i < 4; i++)
+		regs_buff[1131 + i] = IXGBE_READ_REG(hw, IXGBE_TXLLQ(i));
+	regs_buff[1135] = IXGBE_READ_REG(hw, IXGBE_RTTBCNRM);
+					/* same as RTTQCNRM */
+	regs_buff[1136] = IXGBE_READ_REG(hw, IXGBE_RTTBCNRD);
+					/* same as RTTQCNRR */
+
+	/* X540 specific DCB registers  */
+	regs_buff[1137] = IXGBE_READ_REG(hw, IXGBE_RTTQCNCR);
+	regs_buff[1138] = IXGBE_READ_REG(hw, IXGBE_RTTQCNTG);
+}
+
+static int ixgbe_get_eeprom_len(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	return adapter->hw.eeprom.word_size * 2;
+}
+
+static int ixgbe_get_eeprom(struct net_device *netdev,
+			    struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 *eeprom_buff;
+	int first_word, last_word, eeprom_len;
+	int ret_val = 0;
+	u16 i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+	eeprom_len = last_word - first_word + 1;
+
+	eeprom_buff = kmalloc(sizeof(u16) * eeprom_len, GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	ret_val = hw->eeprom.ops.read_buffer(hw, first_word, eeprom_len,
+					     eeprom_buff);
+
+	/* Device's eeprom is always little-endian, word addressable */
+	for (i = 0; i < eeprom_len; i++)
+		le16_to_cpus(&eeprom_buff[i]);
+
+	memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+	kfree(eeprom_buff);
+
+	return ret_val;
+}
+
+static int ixgbe_set_eeprom(struct net_device *netdev,
+			    struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 *eeprom_buff;
+	void *ptr;
+	int max_len, first_word, last_word, ret_val = 0;
+	u16 i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+		return -EINVAL;
+
+	max_len = hw->eeprom.word_size * 2;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+	eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	ptr = eeprom_buff;
+
+	if (eeprom->offset & 1) {
+		/*
+		 * need read/modify/write of first changed EEPROM word
+		 * only the second byte of the word is being modified
+		 */
+		ret_val = hw->eeprom.ops.read(hw, first_word, &eeprom_buff[0]);
+		if (ret_val)
+			goto err;
+
+		ptr++;
+	}
+	if ((eeprom->offset + eeprom->len) & 1) {
+		/*
+		 * need read/modify/write of last changed EEPROM word
+		 * only the first byte of the word is being modified
+		 */
+		ret_val = hw->eeprom.ops.read(hw, last_word,
+					  &eeprom_buff[last_word - first_word]);
+		if (ret_val)
+			goto err;
+	}
+
+	/* Device's eeprom is always little-endian, word addressable */
+	for (i = 0; i < last_word - first_word + 1; i++)
+		le16_to_cpus(&eeprom_buff[i]);
+
+	memcpy(ptr, bytes, eeprom->len);
+
+	for (i = 0; i < last_word - first_word + 1; i++)
+		cpu_to_le16s(&eeprom_buff[i]);
+
+	ret_val = hw->eeprom.ops.write_buffer(hw, first_word,
+					      last_word - first_word + 1,
+					      eeprom_buff);
+
+	/* Update the checksum */
+	if (ret_val == 0)
+		hw->eeprom.ops.update_checksum(hw);
+
+err:
+	kfree(eeprom_buff);
+	return ret_val;
+}
+
+static void ixgbe_get_drvinfo(struct net_device *netdev,
+			      struct ethtool_drvinfo *drvinfo)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	u32 nvm_track_id;
+
+	strlcpy(drvinfo->driver, ixgbe_driver_name, sizeof(drvinfo->driver));
+	strlcpy(drvinfo->version, ixgbe_driver_version,
+		sizeof(drvinfo->version));
+
+	nvm_track_id = (adapter->eeprom_verh << 16) |
+			adapter->eeprom_verl;
+	snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), "0x%08x",
+		 nvm_track_id);
+
+	strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
+		sizeof(drvinfo->bus_info));
+	drvinfo->n_stats = IXGBE_STATS_LEN;
+	drvinfo->testinfo_len = IXGBE_TEST_LEN;
+	drvinfo->regdump_len = ixgbe_get_regs_len(netdev);
+}
+
+static void ixgbe_get_ringparam(struct net_device *netdev,
+				struct ethtool_ringparam *ring)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_ring *tx_ring = adapter->tx_ring[0];
+	struct ixgbe_ring *rx_ring = adapter->rx_ring[0];
+
+	ring->rx_max_pending = IXGBE_MAX_RXD;
+	ring->tx_max_pending = IXGBE_MAX_TXD;
+	ring->rx_pending = rx_ring->count;
+	ring->tx_pending = tx_ring->count;
+}
+
+static int ixgbe_set_ringparam(struct net_device *netdev,
+			       struct ethtool_ringparam *ring)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_ring *temp_ring;
+	int i, err = 0;
+	u32 new_rx_count, new_tx_count;
+
+	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+		return -EINVAL;
+
+	new_tx_count = clamp_t(u32, ring->tx_pending,
+			       IXGBE_MIN_TXD, IXGBE_MAX_TXD);
+	new_tx_count = ALIGN(new_tx_count, IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE);
+
+	new_rx_count = clamp_t(u32, ring->rx_pending,
+			       IXGBE_MIN_RXD, IXGBE_MAX_RXD);
+	new_rx_count = ALIGN(new_rx_count, IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE);
+
+	if ((new_tx_count == adapter->tx_ring_count) &&
+	    (new_rx_count == adapter->rx_ring_count)) {
+		/* nothing to do */
+		return 0;
+	}
+
+	while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
+		usleep_range(1000, 2000);
+
+	if (!netif_running(adapter->netdev)) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			adapter->tx_ring[i]->count = new_tx_count;
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			adapter->rx_ring[i]->count = new_rx_count;
+		adapter->tx_ring_count = new_tx_count;
+		adapter->rx_ring_count = new_rx_count;
+		goto clear_reset;
+	}
+
+	/* allocate temporary buffer to store rings in */
+	i = max_t(int, adapter->num_tx_queues, adapter->num_rx_queues);
+	temp_ring = vmalloc(i * sizeof(struct ixgbe_ring));
+
+	if (!temp_ring) {
+		err = -ENOMEM;
+		goto clear_reset;
+	}
+
+	ixgbe_down(adapter);
+
+	/*
+	 * Setup new Tx resources and free the old Tx resources in that order.
+	 * We can then assign the new resources to the rings via a memcpy.
+	 * The advantage to this approach is that we are guaranteed to still
+	 * have resources even in the case of an allocation failure.
+	 */
+	if (new_tx_count != adapter->tx_ring_count) {
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			memcpy(&temp_ring[i], adapter->tx_ring[i],
+			       sizeof(struct ixgbe_ring));
+
+			temp_ring[i].count = new_tx_count;
+			err = ixgbe_setup_tx_resources(&temp_ring[i]);
+			if (err) {
+				while (i) {
+					i--;
+					ixgbe_free_tx_resources(&temp_ring[i]);
+				}
+				goto err_setup;
+			}
+		}
+
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			ixgbe_free_tx_resources(adapter->tx_ring[i]);
+
+			memcpy(adapter->tx_ring[i], &temp_ring[i],
+			       sizeof(struct ixgbe_ring));
+		}
+
+		adapter->tx_ring_count = new_tx_count;
+	}
+
+	/* Repeat the process for the Rx rings if needed */
+	if (new_rx_count != adapter->rx_ring_count) {
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			memcpy(&temp_ring[i], adapter->rx_ring[i],
+			       sizeof(struct ixgbe_ring));
+
+			temp_ring[i].count = new_rx_count;
+			err = ixgbe_setup_rx_resources(&temp_ring[i]);
+			if (err) {
+				while (i) {
+					i--;
+					ixgbe_free_rx_resources(&temp_ring[i]);
+				}
+				goto err_setup;
+			}
+
+		}
+
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			ixgbe_free_rx_resources(adapter->rx_ring[i]);
+
+			memcpy(adapter->rx_ring[i], &temp_ring[i],
+			       sizeof(struct ixgbe_ring));
+		}
+
+		adapter->rx_ring_count = new_rx_count;
+	}
+
+err_setup:
+	ixgbe_up(adapter);
+	vfree(temp_ring);
+clear_reset:
+	clear_bit(__IXGBE_RESETTING, &adapter->state);
+	return err;
+}
+
+static int ixgbe_get_sset_count(struct net_device *netdev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_TEST:
+		return IXGBE_TEST_LEN;
+	case ETH_SS_STATS:
+		return IXGBE_STATS_LEN;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void ixgbe_get_ethtool_stats(struct net_device *netdev,
+				    struct ethtool_stats *stats, u64 *data)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct rtnl_link_stats64 temp;
+	const struct rtnl_link_stats64 *net_stats;
+	unsigned int start;
+	struct ixgbe_ring *ring;
+	int i, j;
+	char *p = NULL;
+
+	ixgbe_update_stats(adapter);
+	net_stats = dev_get_stats(netdev, &temp);
+	for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
+		switch (ixgbe_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *) net_stats +
+					ixgbe_gstrings_stats[i].stat_offset;
+			break;
+		case IXGBE_STATS:
+			p = (char *) adapter +
+					ixgbe_gstrings_stats[i].stat_offset;
+			break;
+		default:
+			data[i] = 0;
+			continue;
+		}
+
+		data[i] = (ixgbe_gstrings_stats[i].sizeof_stat ==
+			   sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+	}
+	for (j = 0; j < netdev->num_tx_queues; j++) {
+		ring = adapter->tx_ring[j];
+		if (!ring) {
+			data[i] = 0;
+			data[i+1] = 0;
+			i += 2;
+#ifdef BP_EXTENDED_STATS
+			data[i] = 0;
+			data[i+1] = 0;
+			data[i+2] = 0;
+			i += 3;
+#endif
+			continue;
+		}
+
+		do {
+			start = u64_stats_fetch_begin_irq(&ring->syncp);
+			data[i]   = ring->stats.packets;
+			data[i+1] = ring->stats.bytes;
+		} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
+		i += 2;
+#ifdef BP_EXTENDED_STATS
+		data[i] = ring->stats.yields;
+		data[i+1] = ring->stats.misses;
+		data[i+2] = ring->stats.cleaned;
+		i += 3;
+#endif
+	}
+	for (j = 0; j < IXGBE_NUM_RX_QUEUES; j++) {
+		ring = adapter->rx_ring[j];
+		if (!ring) {
+			data[i] = 0;
+			data[i+1] = 0;
+			i += 2;
+#ifdef BP_EXTENDED_STATS
+			data[i] = 0;
+			data[i+1] = 0;
+			data[i+2] = 0;
+			i += 3;
+#endif
+			continue;
+		}
+
+		do {
+			start = u64_stats_fetch_begin_irq(&ring->syncp);
+			data[i]   = ring->stats.packets;
+			data[i+1] = ring->stats.bytes;
+		} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
+		i += 2;
+#ifdef BP_EXTENDED_STATS
+		data[i] = ring->stats.yields;
+		data[i+1] = ring->stats.misses;
+		data[i+2] = ring->stats.cleaned;
+		i += 3;
+#endif
+	}
+
+	for (j = 0; j < IXGBE_MAX_PACKET_BUFFERS; j++) {
+		data[i++] = adapter->stats.pxontxc[j];
+		data[i++] = adapter->stats.pxofftxc[j];
+	}
+	for (j = 0; j < IXGBE_MAX_PACKET_BUFFERS; j++) {
+		data[i++] = adapter->stats.pxonrxc[j];
+		data[i++] = adapter->stats.pxoffrxc[j];
+	}
+}
+
+static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
+			      u8 *data)
+{
+	char *p = (char *)data;
+	int i;
+
+	switch (stringset) {
+	case ETH_SS_TEST:
+		for (i = 0; i < IXGBE_TEST_LEN; i++) {
+			memcpy(data, ixgbe_gstrings_test[i], ETH_GSTRING_LEN);
+			data += ETH_GSTRING_LEN;
+		}
+		break;
+	case ETH_SS_STATS:
+		for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
+			memcpy(p, ixgbe_gstrings_stats[i].stat_string,
+			       ETH_GSTRING_LEN);
+			p += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < netdev->num_tx_queues; i++) {
+			sprintf(p, "tx_queue_%u_packets", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "tx_queue_%u_bytes", i);
+			p += ETH_GSTRING_LEN;
+#ifdef BP_EXTENDED_STATS
+			sprintf(p, "tx_queue_%u_bp_napi_yield", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "tx_queue_%u_bp_misses", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "tx_queue_%u_bp_cleaned", i);
+			p += ETH_GSTRING_LEN;
+#endif /* BP_EXTENDED_STATS */
+		}
+		for (i = 0; i < IXGBE_NUM_RX_QUEUES; i++) {
+			sprintf(p, "rx_queue_%u_packets", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_bytes", i);
+			p += ETH_GSTRING_LEN;
+#ifdef BP_EXTENDED_STATS
+			sprintf(p, "rx_queue_%u_bp_poll_yield", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_bp_misses", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_bp_cleaned", i);
+			p += ETH_GSTRING_LEN;
+#endif /* BP_EXTENDED_STATS */
+		}
+		for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) {
+			sprintf(p, "tx_pb_%u_pxon", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "tx_pb_%u_pxoff", i);
+			p += ETH_GSTRING_LEN;
+		}
+		for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) {
+			sprintf(p, "rx_pb_%u_pxon", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_pb_%u_pxoff", i);
+			p += ETH_GSTRING_LEN;
+		}
+		/* BUG_ON(p - data != IXGBE_STATS_LEN * ETH_GSTRING_LEN); */
+		break;
+	}
+}
+
+static int ixgbe_link_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	bool link_up;
+	u32 link_speed = 0;
+
+	if (ixgbe_removed(hw->hw_addr)) {
+		*data = 1;
+		return 1;
+	}
+	*data = 0;
+
+	hw->mac.ops.check_link(hw, &link_speed, &link_up, true);
+	if (link_up)
+		return *data;
+	else
+		*data = 1;
+	return *data;
+}
+
+/* ethtool register test data */
+struct ixgbe_reg_test {
+	u16 reg;
+	u8  array_len;
+	u8  test_type;
+	u32 mask;
+	u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x40 bytes apart, or in contiguous tables.  We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST	1
+#define SET_READ_TEST	2
+#define WRITE_NO_TEST	3
+#define TABLE32_TEST	4
+#define TABLE64_TEST_LO	5
+#define TABLE64_TEST_HI	6
+
+/* default 82599 register test */
+static const struct ixgbe_reg_test reg_test_82599[] = {
+	{ IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 },
+	{ IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
+	{ IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
+	{ IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 },
+	{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFF80 },
+	{ IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000001, 0x00000001 },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x8001FFFF, 0x800CFFFF },
+	{ IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ .reg = 0 }
+};
+
+/* default 82598 register test */
+static const struct ixgbe_reg_test reg_test_82598[] = {
+	{ IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 },
+	{ IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	/* Enable all four RX queues before testing. */
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
+	/* RDH is read-only for 82598, only test RDT. */
+	{ IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 },
+	{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TIPG, 1, PATTERN_TEST, 0x000000FF, 0x000000FF },
+	{ IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	{ IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000003, 0x00000003 },
+	{ IXGBE_DTXCTL, 1, SET_READ_TEST, 0x00000005, 0x00000005 },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x800CFFFF, 0x800CFFFF },
+	{ IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ .reg = 0 }
+};
+
+static bool reg_pattern_test(struct ixgbe_adapter *adapter, u64 *data, int reg,
+			     u32 mask, u32 write)
+{
+	u32 pat, val, before;
+	static const u32 test_pattern[] = {
+		0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+
+	if (ixgbe_removed(adapter->hw.hw_addr)) {
+		*data = 1;
+		return true;
+	}
+	for (pat = 0; pat < ARRAY_SIZE(test_pattern); pat++) {
+		before = ixgbe_read_reg(&adapter->hw, reg);
+		ixgbe_write_reg(&adapter->hw, reg, test_pattern[pat] & write);
+		val = ixgbe_read_reg(&adapter->hw, reg);
+		if (val != (test_pattern[pat] & write & mask)) {
+			e_err(drv, "pattern test reg %04X failed: got 0x%08X expected 0x%08X\n",
+			      reg, val, (test_pattern[pat] & write & mask));
+			*data = reg;
+			ixgbe_write_reg(&adapter->hw, reg, before);
+			return true;
+		}
+		ixgbe_write_reg(&adapter->hw, reg, before);
+	}
+	return false;
+}
+
+static bool reg_set_and_check(struct ixgbe_adapter *adapter, u64 *data, int reg,
+			      u32 mask, u32 write)
+{
+	u32 val, before;
+
+	if (ixgbe_removed(adapter->hw.hw_addr)) {
+		*data = 1;
+		return true;
+	}
+	before = ixgbe_read_reg(&adapter->hw, reg);
+	ixgbe_write_reg(&adapter->hw, reg, write & mask);
+	val = ixgbe_read_reg(&adapter->hw, reg);
+	if ((write & mask) != (val & mask)) {
+		e_err(drv, "set/check reg %04X test failed: got 0x%08X expected 0x%08X\n",
+		      reg, (val & mask), (write & mask));
+		*data = reg;
+		ixgbe_write_reg(&adapter->hw, reg, before);
+		return true;
+	}
+	ixgbe_write_reg(&adapter->hw, reg, before);
+	return false;
+}
+
+static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	const struct ixgbe_reg_test *test;
+	u32 value, before, after;
+	u32 i, toggle;
+
+	if (ixgbe_removed(adapter->hw.hw_addr)) {
+		e_err(drv, "Adapter removed - register test blocked\n");
+		*data = 1;
+		return 1;
+	}
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
+		toggle = 0x7FFFF3FF;
+		test = reg_test_82598;
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		toggle = 0x7FFFF30F;
+		test = reg_test_82599;
+		break;
+	default:
+		*data = 1;
+		return 1;
+	}
+
+	/*
+	 * Because the status register is such a special case,
+	 * we handle it separately from the rest of the register
+	 * tests.  Some bits are read-only, some toggle, and some
+	 * are writeable on newer MACs.
+	 */
+	before = ixgbe_read_reg(&adapter->hw, IXGBE_STATUS);
+	value = (ixgbe_read_reg(&adapter->hw, IXGBE_STATUS) & toggle);
+	ixgbe_write_reg(&adapter->hw, IXGBE_STATUS, toggle);
+	after = ixgbe_read_reg(&adapter->hw, IXGBE_STATUS) & toggle;
+	if (value != after) {
+		e_err(drv, "failed STATUS register test got: 0x%08X expected: 0x%08X\n",
+		      after, value);
+		*data = 1;
+		return 1;
+	}
+	/* restore previous status */
+	ixgbe_write_reg(&adapter->hw, IXGBE_STATUS, before);
+
+	/*
+	 * Perform the remainder of the register test, looping through
+	 * the test table until we either fail or reach the null entry.
+	 */
+	while (test->reg) {
+		for (i = 0; i < test->array_len; i++) {
+			bool b = false;
+
+			switch (test->test_type) {
+			case PATTERN_TEST:
+				b = reg_pattern_test(adapter, data,
+						     test->reg + (i * 0x40),
+						     test->mask,
+						     test->write);
+				break;
+			case SET_READ_TEST:
+				b = reg_set_and_check(adapter, data,
+						      test->reg + (i * 0x40),
+						      test->mask,
+						      test->write);
+				break;
+			case WRITE_NO_TEST:
+				ixgbe_write_reg(&adapter->hw,
+						test->reg + (i * 0x40),
+						test->write);
+				break;
+			case TABLE32_TEST:
+				b = reg_pattern_test(adapter, data,
+						     test->reg + (i * 4),
+						     test->mask,
+						     test->write);
+				break;
+			case TABLE64_TEST_LO:
+				b = reg_pattern_test(adapter, data,
+						     test->reg + (i * 8),
+						     test->mask,
+						     test->write);
+				break;
+			case TABLE64_TEST_HI:
+				b = reg_pattern_test(adapter, data,
+						     (test->reg + 4) + (i * 8),
+						     test->mask,
+						     test->write);
+				break;
+			}
+			if (b)
+				return 1;
+		}
+		test++;
+	}
+
+	*data = 0;
+	return 0;
+}
+
+static int ixgbe_eeprom_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	if (hw->eeprom.ops.validate_checksum(hw, NULL))
+		*data = 1;
+	else
+		*data = 0;
+	return *data;
+}
+
+static irqreturn_t ixgbe_test_intr(int irq, void *data)
+{
+	struct net_device *netdev = (struct net_device *) data;
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	adapter->test_icr |= IXGBE_READ_REG(&adapter->hw, IXGBE_EICR);
+
+	return IRQ_HANDLED;
+}
+
+static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	struct net_device *netdev = adapter->netdev;
+	u32 mask, i = 0, shared_int = true;
+	u32 irq = adapter->pdev->irq;
+
+	*data = 0;
+
+	/* Hook up test interrupt handler just for this test */
+	if (adapter->msix_entries) {
+		/* NOTE: we don't test MSI-X interrupts here, yet */
+		return 0;
+	} else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
+		shared_int = false;
+		if (request_irq(irq, ixgbe_test_intr, 0, netdev->name,
+				netdev)) {
+			*data = 1;
+			return -1;
+		}
+	} else if (!request_irq(irq, ixgbe_test_intr, IRQF_PROBE_SHARED,
+				netdev->name, netdev)) {
+		shared_int = false;
+	} else if (request_irq(irq, ixgbe_test_intr, IRQF_SHARED,
+			       netdev->name, netdev)) {
+		*data = 1;
+		return -1;
+	}
+	e_info(hw, "testing %s interrupt\n", shared_int ?
+	       "shared" : "unshared");
+
+	/* Disable all the interrupts */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
+	IXGBE_WRITE_FLUSH(&adapter->hw);
+	usleep_range(10000, 20000);
+
+	/* Test each interrupt */
+	for (; i < 10; i++) {
+		/* Interrupt to test */
+		mask = 1 << i;
+
+		if (!shared_int) {
+			/*
+			 * Disable the interrupts to be reported in
+			 * the cause register and then force the same
+			 * interrupt and see if one gets posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC,
+					~mask & 0x00007FFF);
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
+					~mask & 0x00007FFF);
+			IXGBE_WRITE_FLUSH(&adapter->hw);
+			usleep_range(10000, 20000);
+
+			if (adapter->test_icr & mask) {
+				*data = 3;
+				break;
+			}
+		}
+
+		/*
+		 * Enable the interrupt to be reported in the cause
+		 * register and then force the same interrupt and see
+		 * if one gets posted.  If an interrupt was not posted
+		 * to the bus, the test failed.
+		 */
+		adapter->test_icr = 0;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
+		IXGBE_WRITE_FLUSH(&adapter->hw);
+		usleep_range(10000, 20000);
+
+		if (!(adapter->test_icr & mask)) {
+			*data = 4;
+			break;
+		}
+
+		if (!shared_int) {
+			/*
+			 * Disable the other interrupts to be reported in
+			 * the cause register and then force the other
+			 * interrupts and see if any get posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC,
+					~mask & 0x00007FFF);
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
+					~mask & 0x00007FFF);
+			IXGBE_WRITE_FLUSH(&adapter->hw);
+			usleep_range(10000, 20000);
+
+			if (adapter->test_icr) {
+				*data = 5;
+				break;
+			}
+		}
+	}
+
+	/* Disable all the interrupts */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
+	IXGBE_WRITE_FLUSH(&adapter->hw);
+	usleep_range(10000, 20000);
+
+	/* Unhook test interrupt handler */
+	free_irq(irq, netdev);
+
+	return *data;
+}
+
+static void ixgbe_free_desc_rings(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 reg_ctl;
+
+	/* shut down the DMA engines now so they can be reinitialized later */
+
+	/* first Rx */
+	hw->mac.ops.disable_rx(hw);
+	ixgbe_disable_rx_queue(adapter, rx_ring);
+
+	/* now Tx */
+	reg_ctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx));
+	reg_ctl &= ~IXGBE_TXDCTL_ENABLE;
+	IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx), reg_ctl);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		reg_ctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+		reg_ctl &= ~IXGBE_DMATXCTL_TE;
+		IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg_ctl);
+		break;
+	default:
+		break;
+	}
+
+	ixgbe_reset(adapter);
+
+	ixgbe_free_tx_resources(&adapter->test_tx_ring);
+	ixgbe_free_rx_resources(&adapter->test_rx_ring);
+}
+
+static int ixgbe_setup_desc_rings(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 rctl, reg_data;
+	int ret_val;
+	int err;
+
+	/* Setup Tx descriptor ring and Tx buffers */
+	tx_ring->count = IXGBE_DEFAULT_TXD;
+	tx_ring->queue_index = 0;
+	tx_ring->dev = &adapter->pdev->dev;
+	tx_ring->netdev = adapter->netdev;
+	tx_ring->reg_idx = adapter->tx_ring[0]->reg_idx;
+
+	err = ixgbe_setup_tx_resources(tx_ring);
+	if (err)
+		return 1;
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_DMATXCTL);
+		reg_data |= IXGBE_DMATXCTL_TE;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DMATXCTL, reg_data);
+		break;
+	default:
+		break;
+	}
+
+	ixgbe_configure_tx_ring(adapter, tx_ring);
+
+	/* Setup Rx Descriptor ring and Rx buffers */
+	rx_ring->count = IXGBE_DEFAULT_RXD;
+	rx_ring->queue_index = 0;
+	rx_ring->dev = &adapter->pdev->dev;
+	rx_ring->netdev = adapter->netdev;
+	rx_ring->reg_idx = adapter->rx_ring[0]->reg_idx;
+
+	err = ixgbe_setup_rx_resources(rx_ring);
+	if (err) {
+		ret_val = 4;
+		goto err_nomem;
+	}
+
+	hw->mac.ops.disable_rx(hw);
+
+	ixgbe_configure_rx_ring(adapter, rx_ring);
+
+	rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCTRL);
+	rctl |= IXGBE_RXCTRL_DMBYPS;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl);
+
+	hw->mac.ops.enable_rx(hw);
+
+	return 0;
+
+err_nomem:
+	ixgbe_free_desc_rings(adapter);
+	return ret_val;
+}
+
+static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 reg_data;
+
+
+	/* Setup MAC loopback */
+	reg_data = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+	reg_data |= IXGBE_HLREG0_LPBK;
+	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg_data);
+
+	reg_data = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	reg_data |= IXGBE_FCTRL_BAM | IXGBE_FCTRL_SBP | IXGBE_FCTRL_MPE;
+	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg_data);
+
+	/* X540 and X550 needs to set the MACC.FLU bit to force link up */
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		reg_data = IXGBE_READ_REG(hw, IXGBE_MACC);
+		reg_data |= IXGBE_MACC_FLU;
+		IXGBE_WRITE_REG(hw, IXGBE_MACC, reg_data);
+		break;
+	default:
+		if (hw->mac.orig_autoc) {
+			reg_data = hw->mac.orig_autoc | IXGBE_AUTOC_FLU;
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_data);
+		} else {
+			return 10;
+		}
+	}
+	IXGBE_WRITE_FLUSH(hw);
+	usleep_range(10000, 20000);
+
+	/* Disable Atlas Tx lanes; re-enabled in reset path */
+	if (hw->mac.type == ixgbe_mac_82598EB) {
+		u8 atlas;
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_REG_EN;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, atlas);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, atlas);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, atlas);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, atlas);
+	}
+
+	return 0;
+}
+
+static void ixgbe_loopback_cleanup(struct ixgbe_adapter *adapter)
+{
+	u32 reg_data;
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+	reg_data &= ~IXGBE_HLREG0_LPBK;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
+}
+
+static void ixgbe_create_lbtest_frame(struct sk_buff *skb,
+				      unsigned int frame_size)
+{
+	memset(skb->data, 0xFF, frame_size);
+	frame_size >>= 1;
+	memset(&skb->data[frame_size], 0xAA, frame_size / 2 - 1);
+	memset(&skb->data[frame_size + 10], 0xBE, 1);
+	memset(&skb->data[frame_size + 12], 0xAF, 1);
+}
+
+static bool ixgbe_check_lbtest_frame(struct ixgbe_rx_buffer *rx_buffer,
+				     unsigned int frame_size)
+{
+	unsigned char *data;
+	bool match = true;
+
+	frame_size >>= 1;
+
+	data = kmap(rx_buffer->page) + rx_buffer->page_offset;
+
+	if (data[3] != 0xFF ||
+	    data[frame_size + 10] != 0xBE ||
+	    data[frame_size + 12] != 0xAF)
+		match = false;
+
+	kunmap(rx_buffer->page);
+
+	return match;
+}
+
+static u16 ixgbe_clean_test_rings(struct ixgbe_ring *rx_ring,
+				  struct ixgbe_ring *tx_ring,
+				  unsigned int size)
+{
+	union ixgbe_adv_rx_desc *rx_desc;
+	struct ixgbe_rx_buffer *rx_buffer;
+	struct ixgbe_tx_buffer *tx_buffer;
+	u16 rx_ntc, tx_ntc, count = 0;
+
+	/* initialize next to clean and descriptor values */
+	rx_ntc = rx_ring->next_to_clean;
+	tx_ntc = tx_ring->next_to_clean;
+	rx_desc = IXGBE_RX_DESC(rx_ring, rx_ntc);
+
+	while (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_DD)) {
+		/* check Rx buffer */
+		rx_buffer = &rx_ring->rx_buffer_info[rx_ntc];
+
+		/* sync Rx buffer for CPU read */
+		dma_sync_single_for_cpu(rx_ring->dev,
+					rx_buffer->dma,
+					ixgbe_rx_bufsz(rx_ring),
+					DMA_FROM_DEVICE);
+
+		/* verify contents of skb */
+		if (ixgbe_check_lbtest_frame(rx_buffer, size))
+			count++;
+
+		/* sync Rx buffer for device write */
+		dma_sync_single_for_device(rx_ring->dev,
+					   rx_buffer->dma,
+					   ixgbe_rx_bufsz(rx_ring),
+					   DMA_FROM_DEVICE);
+
+		/* unmap buffer on Tx side */
+		tx_buffer = &tx_ring->tx_buffer_info[tx_ntc];
+		ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer);
+
+		/* increment Rx/Tx next to clean counters */
+		rx_ntc++;
+		if (rx_ntc == rx_ring->count)
+			rx_ntc = 0;
+		tx_ntc++;
+		if (tx_ntc == tx_ring->count)
+			tx_ntc = 0;
+
+		/* fetch next descriptor */
+		rx_desc = IXGBE_RX_DESC(rx_ring, rx_ntc);
+	}
+
+	netdev_tx_reset_queue(txring_txq(tx_ring));
+
+	/* re-map buffers to ring, store next to clean values */
+	ixgbe_alloc_rx_buffers(rx_ring, count);
+	rx_ring->next_to_clean = rx_ntc;
+	tx_ring->next_to_clean = tx_ntc;
+
+	return count;
+}
+
+static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+	int i, j, lc, good_cnt, ret_val = 0;
+	unsigned int size = 1024;
+	netdev_tx_t tx_ret_val;
+	struct sk_buff *skb;
+	u32 flags_orig = adapter->flags;
+
+	/* DCB can modify the frames on Tx */
+	adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
+
+	/* allocate test skb */
+	skb = alloc_skb(size, GFP_KERNEL);
+	if (!skb)
+		return 11;
+
+	/* place data into test skb */
+	ixgbe_create_lbtest_frame(skb, size);
+	skb_put(skb, size);
+
+	/*
+	 * Calculate the loop count based on the largest descriptor ring
+	 * The idea is to wrap the largest ring a number of times using 64
+	 * send/receive pairs during each loop
+	 */
+
+	if (rx_ring->count <= tx_ring->count)
+		lc = ((tx_ring->count / 64) * 2) + 1;
+	else
+		lc = ((rx_ring->count / 64) * 2) + 1;
+
+	for (j = 0; j <= lc; j++) {
+		/* reset count of good packets */
+		good_cnt = 0;
+
+		/* place 64 packets on the transmit queue*/
+		for (i = 0; i < 64; i++) {
+			skb_get(skb);
+			tx_ret_val = ixgbe_xmit_frame_ring(skb,
+							   adapter,
+							   tx_ring);
+			if (tx_ret_val == NETDEV_TX_OK)
+				good_cnt++;
+		}
+
+		if (good_cnt != 64) {
+			ret_val = 12;
+			break;
+		}
+
+		/* allow 200 milliseconds for packets to go from Tx to Rx */
+		msleep(200);
+
+		good_cnt = ixgbe_clean_test_rings(rx_ring, tx_ring, size);
+		if (good_cnt != 64) {
+			ret_val = 13;
+			break;
+		}
+	}
+
+	/* free the original skb */
+	kfree_skb(skb);
+	adapter->flags = flags_orig;
+
+	return ret_val;
+}
+
+static int ixgbe_loopback_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	*data = ixgbe_setup_desc_rings(adapter);
+	if (*data)
+		goto out;
+	*data = ixgbe_setup_loopback_test(adapter);
+	if (*data)
+		goto err_loopback;
+	*data = ixgbe_run_loopback_test(adapter);
+	ixgbe_loopback_cleanup(adapter);
+
+err_loopback:
+	ixgbe_free_desc_rings(adapter);
+out:
+	return *data;
+}
+
+static void ixgbe_diag_test(struct net_device *netdev,
+			    struct ethtool_test *eth_test, u64 *data)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	bool if_running = netif_running(netdev);
+
+	if (ixgbe_removed(adapter->hw.hw_addr)) {
+		e_err(hw, "Adapter removed - test blocked\n");
+		data[0] = 1;
+		data[1] = 1;
+		data[2] = 1;
+		data[3] = 1;
+		data[4] = 1;
+		eth_test->flags |= ETH_TEST_FL_FAILED;
+		return;
+	}
+	set_bit(__IXGBE_TESTING, &adapter->state);
+	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+		struct ixgbe_hw *hw = &adapter->hw;
+
+		if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+			int i;
+			for (i = 0; i < adapter->num_vfs; i++) {
+				if (adapter->vfinfo[i].clear_to_send) {
+					netdev_warn(netdev, "offline diagnostic is not supported when VFs are present\n");
+					data[0] = 1;
+					data[1] = 1;
+					data[2] = 1;
+					data[3] = 1;
+					data[4] = 1;
+					eth_test->flags |= ETH_TEST_FL_FAILED;
+					clear_bit(__IXGBE_TESTING,
+						  &adapter->state);
+					goto skip_ol_tests;
+				}
+			}
+		}
+
+		/* Offline tests */
+		e_info(hw, "offline testing starting\n");
+
+		/* Link test performed before hardware reset so autoneg doesn't
+		 * interfere with test result
+		 */
+		if (ixgbe_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		if (if_running)
+			/* indicate we're in test mode */
+			dev_close(netdev);
+		else
+			ixgbe_reset(adapter);
+
+		e_info(hw, "register testing starting\n");
+		if (ixgbe_reg_test(adapter, &data[0]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		ixgbe_reset(adapter);
+		e_info(hw, "eeprom testing starting\n");
+		if (ixgbe_eeprom_test(adapter, &data[1]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		ixgbe_reset(adapter);
+		e_info(hw, "interrupt testing starting\n");
+		if (ixgbe_intr_test(adapter, &data[2]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		/* If SRIOV or VMDq is enabled then skip MAC
+		 * loopback diagnostic. */
+		if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED |
+				      IXGBE_FLAG_VMDQ_ENABLED)) {
+			e_info(hw, "Skip MAC loopback diagnostic in VT mode\n");
+			data[3] = 0;
+			goto skip_loopback;
+		}
+
+		ixgbe_reset(adapter);
+		e_info(hw, "loopback testing starting\n");
+		if (ixgbe_loopback_test(adapter, &data[3]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+skip_loopback:
+		ixgbe_reset(adapter);
+
+		/* clear testing bit and return adapter to previous state */
+		clear_bit(__IXGBE_TESTING, &adapter->state);
+		if (if_running)
+			dev_open(netdev);
+		else if (hw->mac.ops.disable_tx_laser)
+			hw->mac.ops.disable_tx_laser(hw);
+	} else {
+		e_info(hw, "online testing starting\n");
+
+		/* Online tests */
+		if (ixgbe_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		/* Offline tests aren't run; pass by default */
+		data[0] = 0;
+		data[1] = 0;
+		data[2] = 0;
+		data[3] = 0;
+
+		clear_bit(__IXGBE_TESTING, &adapter->state);
+	}
+
+skip_ol_tests:
+	msleep_interruptible(4 * 1000);
+}
+
+static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
+			       struct ethtool_wolinfo *wol)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int retval = 0;
+
+	/* WOL not supported for all devices */
+	if (!ixgbe_wol_supported(adapter, hw->device_id,
+				 hw->subsystem_device_id)) {
+		retval = 1;
+		wol->supported = 0;
+	}
+
+	return retval;
+}
+
+static void ixgbe_get_wol(struct net_device *netdev,
+			  struct ethtool_wolinfo *wol)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	wol->supported = WAKE_UCAST | WAKE_MCAST |
+			 WAKE_BCAST | WAKE_MAGIC;
+	wol->wolopts = 0;
+
+	if (ixgbe_wol_exclusion(adapter, wol) ||
+	    !device_can_wakeup(&adapter->pdev->dev))
+		return;
+
+	if (adapter->wol & IXGBE_WUFC_EX)
+		wol->wolopts |= WAKE_UCAST;
+	if (adapter->wol & IXGBE_WUFC_MC)
+		wol->wolopts |= WAKE_MCAST;
+	if (adapter->wol & IXGBE_WUFC_BC)
+		wol->wolopts |= WAKE_BCAST;
+	if (adapter->wol & IXGBE_WUFC_MAG)
+		wol->wolopts |= WAKE_MAGIC;
+}
+
+static int ixgbe_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+		return -EOPNOTSUPP;
+
+	if (ixgbe_wol_exclusion(adapter, wol))
+		return wol->wolopts ? -EOPNOTSUPP : 0;
+
+	adapter->wol = 0;
+
+	if (wol->wolopts & WAKE_UCAST)
+		adapter->wol |= IXGBE_WUFC_EX;
+	if (wol->wolopts & WAKE_MCAST)
+		adapter->wol |= IXGBE_WUFC_MC;
+	if (wol->wolopts & WAKE_BCAST)
+		adapter->wol |= IXGBE_WUFC_BC;
+	if (wol->wolopts & WAKE_MAGIC)
+		adapter->wol |= IXGBE_WUFC_MAG;
+
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+	return 0;
+}
+
+static int ixgbe_nway_reset(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	if (netif_running(netdev))
+		ixgbe_reinit_locked(adapter);
+
+	return 0;
+}
+
+static int ixgbe_set_phys_id(struct net_device *netdev,
+			     enum ethtool_phys_id_state state)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		adapter->led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+		return 2;
+
+	case ETHTOOL_ID_ON:
+		hw->mac.ops.led_on(hw, IXGBE_LED_ON);
+		break;
+
+	case ETHTOOL_ID_OFF:
+		hw->mac.ops.led_off(hw, IXGBE_LED_ON);
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
+		/* Restore LED settings */
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, adapter->led_reg);
+		break;
+	}
+
+	return 0;
+}
+
+static int ixgbe_get_coalesce(struct net_device *netdev,
+			      struct ethtool_coalesce *ec)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	/* only valid if in constant ITR mode */
+	if (adapter->rx_itr_setting <= 1)
+		ec->rx_coalesce_usecs = adapter->rx_itr_setting;
+	else
+		ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
+
+	/* if in mixed tx/rx queues per vector mode, report only rx settings */
+	if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count)
+		return 0;
+
+	/* only valid if in constant ITR mode */
+	if (adapter->tx_itr_setting <= 1)
+		ec->tx_coalesce_usecs = adapter->tx_itr_setting;
+	else
+		ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
+
+	return 0;
+}
+
+/*
+ * this function must be called before setting the new value of
+ * rx_itr_setting
+ */
+static bool ixgbe_update_rsc(struct ixgbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	/* nothing to do if LRO or RSC are not enabled */
+	if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) ||
+	    !(netdev->features & NETIF_F_LRO))
+		return false;
+
+	/* check the feature flag value and enable RSC if necessary */
+	if (adapter->rx_itr_setting == 1 ||
+	    adapter->rx_itr_setting > IXGBE_MIN_RSC_ITR) {
+		if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) {
+			adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
+			e_info(probe, "rx-usecs value high enough to re-enable RSC\n");
+			return true;
+		}
+	/* if interrupt rate is too high then disable RSC */
+	} else if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
+		adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
+		e_info(probe, "rx-usecs set too low, disabling RSC\n");
+		return true;
+	}
+	return false;
+}
+
+static int ixgbe_set_coalesce(struct net_device *netdev,
+			      struct ethtool_coalesce *ec)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_q_vector *q_vector;
+	int i;
+	u16 tx_itr_param, rx_itr_param, tx_itr_prev;
+	bool need_reset = false;
+
+	if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count) {
+		/* reject Tx specific changes in case of mixed RxTx vectors */
+		if (ec->tx_coalesce_usecs)
+			return -EINVAL;
+		tx_itr_prev = adapter->rx_itr_setting;
+	} else {
+		tx_itr_prev = adapter->tx_itr_setting;
+	}
+
+	if ((ec->rx_coalesce_usecs > (IXGBE_MAX_EITR >> 2)) ||
+	    (ec->tx_coalesce_usecs > (IXGBE_MAX_EITR >> 2)))
+		return -EINVAL;
+
+	if (ec->rx_coalesce_usecs > 1)
+		adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2;
+	else
+		adapter->rx_itr_setting = ec->rx_coalesce_usecs;
+
+	if (adapter->rx_itr_setting == 1)
+		rx_itr_param = IXGBE_20K_ITR;
+	else
+		rx_itr_param = adapter->rx_itr_setting;
+
+	if (ec->tx_coalesce_usecs > 1)
+		adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2;
+	else
+		adapter->tx_itr_setting = ec->tx_coalesce_usecs;
+
+	if (adapter->tx_itr_setting == 1)
+		tx_itr_param = IXGBE_10K_ITR;
+	else
+		tx_itr_param = adapter->tx_itr_setting;
+
+	/* mixed Rx/Tx */
+	if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count)
+		adapter->tx_itr_setting = adapter->rx_itr_setting;
+
+	/* detect ITR changes that require update of TXDCTL.WTHRESH */
+	if ((adapter->tx_itr_setting != 1) &&
+	    (adapter->tx_itr_setting < IXGBE_100K_ITR)) {
+		if ((tx_itr_prev == 1) ||
+		    (tx_itr_prev >= IXGBE_100K_ITR))
+			need_reset = true;
+	} else {
+		if ((tx_itr_prev != 1) &&
+		    (tx_itr_prev < IXGBE_100K_ITR))
+			need_reset = true;
+	}
+
+	/* check the old value and enable RSC if necessary */
+	need_reset |= ixgbe_update_rsc(adapter);
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		q_vector = adapter->q_vector[i];
+		if (q_vector->tx.count && !q_vector->rx.count)
+			/* tx only */
+			q_vector->itr = tx_itr_param;
+		else
+			/* rx only or mixed */
+			q_vector->itr = rx_itr_param;
+		ixgbe_write_eitr(q_vector);
+	}
+
+	/*
+	 * do reset here at the end to make sure EITR==0 case is handled
+	 * correctly w.r.t stopping tx, and changing TXDCTL.WTHRESH settings
+	 * also locks in RSC enable/disable which requires reset
+	 */
+	if (need_reset)
+		ixgbe_do_reset(netdev);
+
+	return 0;
+}
+
+static int ixgbe_get_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
+					struct ethtool_rxnfc *cmd)
+{
+	union ixgbe_atr_input *mask = &adapter->fdir_mask;
+	struct ethtool_rx_flow_spec *fsp =
+		(struct ethtool_rx_flow_spec *)&cmd->fs;
+	struct hlist_node *node2;
+	struct ixgbe_fdir_filter *rule = NULL;
+
+	/* report total rule count */
+	cmd->data = (1024 << adapter->fdir_pballoc) - 2;
+
+	hlist_for_each_entry_safe(rule, node2,
+				  &adapter->fdir_filter_list, fdir_node) {
+		if (fsp->location <= rule->sw_idx)
+			break;
+	}
+
+	if (!rule || fsp->location != rule->sw_idx)
+		return -EINVAL;
+
+	/* fill out the flow spec entry */
+
+	/* set flow type field */
+	switch (rule->filter.formatted.flow_type) {
+	case IXGBE_ATR_FLOW_TYPE_TCPV4:
+		fsp->flow_type = TCP_V4_FLOW;
+		break;
+	case IXGBE_ATR_FLOW_TYPE_UDPV4:
+		fsp->flow_type = UDP_V4_FLOW;
+		break;
+	case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+		fsp->flow_type = SCTP_V4_FLOW;
+		break;
+	case IXGBE_ATR_FLOW_TYPE_IPV4:
+		fsp->flow_type = IP_USER_FLOW;
+		fsp->h_u.usr_ip4_spec.ip_ver = ETH_RX_NFC_IP4;
+		fsp->h_u.usr_ip4_spec.proto = 0;
+		fsp->m_u.usr_ip4_spec.proto = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	fsp->h_u.tcp_ip4_spec.psrc = rule->filter.formatted.src_port;
+	fsp->m_u.tcp_ip4_spec.psrc = mask->formatted.src_port;
+	fsp->h_u.tcp_ip4_spec.pdst = rule->filter.formatted.dst_port;
+	fsp->m_u.tcp_ip4_spec.pdst = mask->formatted.dst_port;
+	fsp->h_u.tcp_ip4_spec.ip4src = rule->filter.formatted.src_ip[0];
+	fsp->m_u.tcp_ip4_spec.ip4src = mask->formatted.src_ip[0];
+	fsp->h_u.tcp_ip4_spec.ip4dst = rule->filter.formatted.dst_ip[0];
+	fsp->m_u.tcp_ip4_spec.ip4dst = mask->formatted.dst_ip[0];
+	fsp->h_ext.vlan_tci = rule->filter.formatted.vlan_id;
+	fsp->m_ext.vlan_tci = mask->formatted.vlan_id;
+	fsp->h_ext.vlan_etype = rule->filter.formatted.flex_bytes;
+	fsp->m_ext.vlan_etype = mask->formatted.flex_bytes;
+	fsp->h_ext.data[1] = htonl(rule->filter.formatted.vm_pool);
+	fsp->m_ext.data[1] = htonl(mask->formatted.vm_pool);
+	fsp->flow_type |= FLOW_EXT;
+
+	/* record action */
+	if (rule->action == IXGBE_FDIR_DROP_QUEUE)
+		fsp->ring_cookie = RX_CLS_FLOW_DISC;
+	else
+		fsp->ring_cookie = rule->action;
+
+	return 0;
+}
+
+static int ixgbe_get_ethtool_fdir_all(struct ixgbe_adapter *adapter,
+				      struct ethtool_rxnfc *cmd,
+				      u32 *rule_locs)
+{
+	struct hlist_node *node2;
+	struct ixgbe_fdir_filter *rule;
+	int cnt = 0;
+
+	/* report total rule count */
+	cmd->data = (1024 << adapter->fdir_pballoc) - 2;
+
+	hlist_for_each_entry_safe(rule, node2,
+				  &adapter->fdir_filter_list, fdir_node) {
+		if (cnt == cmd->rule_cnt)
+			return -EMSGSIZE;
+		rule_locs[cnt] = rule->sw_idx;
+		cnt++;
+	}
+
+	cmd->rule_cnt = cnt;
+
+	return 0;
+}
+
+static int ixgbe_get_rss_hash_opts(struct ixgbe_adapter *adapter,
+				   struct ethtool_rxnfc *cmd)
+{
+	cmd->data = 0;
+
+	/* Report default options for RSS on ixgbe */
+	switch (cmd->flow_type) {
+	case TCP_V4_FLOW:
+		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* fallthrough */
+	case UDP_V4_FLOW:
+		if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV4_UDP)
+			cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* fallthrough */
+	case SCTP_V4_FLOW:
+	case AH_ESP_V4_FLOW:
+	case AH_V4_FLOW:
+	case ESP_V4_FLOW:
+	case IPV4_FLOW:
+		cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+		break;
+	case TCP_V6_FLOW:
+		cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* fallthrough */
+	case UDP_V6_FLOW:
+		if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV6_UDP)
+			cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+		/* fallthrough */
+	case SCTP_V6_FLOW:
+	case AH_ESP_V6_FLOW:
+	case AH_V6_FLOW:
+	case ESP_V6_FLOW:
+	case IPV6_FLOW:
+		cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
+			   u32 *rule_locs)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	int ret = -EOPNOTSUPP;
+
+	switch (cmd->cmd) {
+	case ETHTOOL_GRXRINGS:
+		cmd->data = adapter->num_rx_queues;
+		ret = 0;
+		break;
+	case ETHTOOL_GRXCLSRLCNT:
+		cmd->rule_cnt = adapter->fdir_filter_count;
+		ret = 0;
+		break;
+	case ETHTOOL_GRXCLSRULE:
+		ret = ixgbe_get_ethtool_fdir_entry(adapter, cmd);
+		break;
+	case ETHTOOL_GRXCLSRLALL:
+		ret = ixgbe_get_ethtool_fdir_all(adapter, cmd, rule_locs);
+		break;
+	case ETHTOOL_GRXFH:
+		ret = ixgbe_get_rss_hash_opts(adapter, cmd);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int ixgbe_update_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
+					   struct ixgbe_fdir_filter *input,
+					   u16 sw_idx)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct hlist_node *node2;
+	struct ixgbe_fdir_filter *rule, *parent;
+	int err = -EINVAL;
+
+	parent = NULL;
+	rule = NULL;
+
+	hlist_for_each_entry_safe(rule, node2,
+				  &adapter->fdir_filter_list, fdir_node) {
+		/* hash found, or no matching entry */
+		if (rule->sw_idx >= sw_idx)
+			break;
+		parent = rule;
+	}
+
+	/* if there is an old rule occupying our place remove it */
+	if (rule && (rule->sw_idx == sw_idx)) {
+		if (!input || (rule->filter.formatted.bkt_hash !=
+			       input->filter.formatted.bkt_hash)) {
+			err = ixgbe_fdir_erase_perfect_filter_82599(hw,
+								&rule->filter,
+								sw_idx);
+		}
+
+		hlist_del(&rule->fdir_node);
+		kfree(rule);
+		adapter->fdir_filter_count--;
+	}
+
+	/*
+	 * If no input this was a delete, err should be 0 if a rule was
+	 * successfully found and removed from the list else -EINVAL
+	 */
+	if (!input)
+		return err;
+
+	/* initialize node and set software index */
+	INIT_HLIST_NODE(&input->fdir_node);
+
+	/* add filter to the list */
+	if (parent)
+		hlist_add_behind(&input->fdir_node, &parent->fdir_node);
+	else
+		hlist_add_head(&input->fdir_node,
+			       &adapter->fdir_filter_list);
+
+	/* update counts */
+	adapter->fdir_filter_count++;
+
+	return 0;
+}
+
+static int ixgbe_flowspec_to_flow_type(struct ethtool_rx_flow_spec *fsp,
+				       u8 *flow_type)
+{
+	switch (fsp->flow_type & ~FLOW_EXT) {
+	case TCP_V4_FLOW:
+		*flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
+		break;
+	case UDP_V4_FLOW:
+		*flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4;
+		break;
+	case SCTP_V4_FLOW:
+		*flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4;
+		break;
+	case IP_USER_FLOW:
+		switch (fsp->h_u.usr_ip4_spec.proto) {
+		case IPPROTO_TCP:
+			*flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
+			break;
+		case IPPROTO_UDP:
+			*flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4;
+			break;
+		case IPPROTO_SCTP:
+			*flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4;
+			break;
+		case 0:
+			if (!fsp->m_u.usr_ip4_spec.proto) {
+				*flow_type = IXGBE_ATR_FLOW_TYPE_IPV4;
+				break;
+			}
+		default:
+			return 0;
+		}
+		break;
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
+static int ixgbe_add_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
+					struct ethtool_rxnfc *cmd)
+{
+	struct ethtool_rx_flow_spec *fsp =
+		(struct ethtool_rx_flow_spec *)&cmd->fs;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_fdir_filter *input;
+	union ixgbe_atr_input mask;
+	int err;
+
+	if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+		return -EOPNOTSUPP;
+
+	/*
+	 * Don't allow programming if the action is a queue greater than
+	 * the number of online Rx queues.
+	 */
+	if ((fsp->ring_cookie != RX_CLS_FLOW_DISC) &&
+	    (fsp->ring_cookie >= adapter->num_rx_queues))
+		return -EINVAL;
+
+	/* Don't allow indexes to exist outside of available space */
+	if (fsp->location >= ((1024 << adapter->fdir_pballoc) - 2)) {
+		e_err(drv, "Location out of range\n");
+		return -EINVAL;
+	}
+
+	input = kzalloc(sizeof(*input), GFP_ATOMIC);
+	if (!input)
+		return -ENOMEM;
+
+	memset(&mask, 0, sizeof(union ixgbe_atr_input));
+
+	/* set SW index */
+	input->sw_idx = fsp->location;
+
+	/* record flow type */
+	if (!ixgbe_flowspec_to_flow_type(fsp,
+					 &input->filter.formatted.flow_type)) {
+		e_err(drv, "Unrecognized flow type\n");
+		goto err_out;
+	}
+
+	mask.formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK |
+				   IXGBE_ATR_L4TYPE_MASK;
+
+	if (input->filter.formatted.flow_type == IXGBE_ATR_FLOW_TYPE_IPV4)
+		mask.formatted.flow_type &= IXGBE_ATR_L4TYPE_IPV6_MASK;
+
+	/* Copy input into formatted structures */
+	input->filter.formatted.src_ip[0] = fsp->h_u.tcp_ip4_spec.ip4src;
+	mask.formatted.src_ip[0] = fsp->m_u.tcp_ip4_spec.ip4src;
+	input->filter.formatted.dst_ip[0] = fsp->h_u.tcp_ip4_spec.ip4dst;
+	mask.formatted.dst_ip[0] = fsp->m_u.tcp_ip4_spec.ip4dst;
+	input->filter.formatted.src_port = fsp->h_u.tcp_ip4_spec.psrc;
+	mask.formatted.src_port = fsp->m_u.tcp_ip4_spec.psrc;
+	input->filter.formatted.dst_port = fsp->h_u.tcp_ip4_spec.pdst;
+	mask.formatted.dst_port = fsp->m_u.tcp_ip4_spec.pdst;
+
+	if (fsp->flow_type & FLOW_EXT) {
+		input->filter.formatted.vm_pool =
+				(unsigned char)ntohl(fsp->h_ext.data[1]);
+		mask.formatted.vm_pool =
+				(unsigned char)ntohl(fsp->m_ext.data[1]);
+		input->filter.formatted.vlan_id = fsp->h_ext.vlan_tci;
+		mask.formatted.vlan_id = fsp->m_ext.vlan_tci;
+		input->filter.formatted.flex_bytes =
+						fsp->h_ext.vlan_etype;
+		mask.formatted.flex_bytes = fsp->m_ext.vlan_etype;
+	}
+
+	/* determine if we need to drop or route the packet */
+	if (fsp->ring_cookie == RX_CLS_FLOW_DISC)
+		input->action = IXGBE_FDIR_DROP_QUEUE;
+	else
+		input->action = fsp->ring_cookie;
+
+	spin_lock(&adapter->fdir_perfect_lock);
+
+	if (hlist_empty(&adapter->fdir_filter_list)) {
+		/* save mask and program input mask into HW */
+		memcpy(&adapter->fdir_mask, &mask, sizeof(mask));
+		err = ixgbe_fdir_set_input_mask_82599(hw, &mask);
+		if (err) {
+			e_err(drv, "Error writing mask\n");
+			goto err_out_w_lock;
+		}
+	} else if (memcmp(&adapter->fdir_mask, &mask, sizeof(mask))) {
+		e_err(drv, "Only one mask supported per port\n");
+		goto err_out_w_lock;
+	}
+
+	/* apply mask and compute/store hash */
+	ixgbe_atr_compute_perfect_hash_82599(&input->filter, &mask);
+
+	/* program filters to filter memory */
+	err = ixgbe_fdir_write_perfect_filter_82599(hw,
+				&input->filter, input->sw_idx,
+				(input->action == IXGBE_FDIR_DROP_QUEUE) ?
+				IXGBE_FDIR_DROP_QUEUE :
+				adapter->rx_ring[input->action]->reg_idx);
+	if (err)
+		goto err_out_w_lock;
+
+	ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx);
+
+	spin_unlock(&adapter->fdir_perfect_lock);
+
+	return err;
+err_out_w_lock:
+	spin_unlock(&adapter->fdir_perfect_lock);
+err_out:
+	kfree(input);
+	return -EINVAL;
+}
+
+static int ixgbe_del_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
+					struct ethtool_rxnfc *cmd)
+{
+	struct ethtool_rx_flow_spec *fsp =
+		(struct ethtool_rx_flow_spec *)&cmd->fs;
+	int err;
+
+	spin_lock(&adapter->fdir_perfect_lock);
+	err = ixgbe_update_ethtool_fdir_entry(adapter, NULL, fsp->location);
+	spin_unlock(&adapter->fdir_perfect_lock);
+
+	return err;
+}
+
+#define UDP_RSS_FLAGS (IXGBE_FLAG2_RSS_FIELD_IPV4_UDP | \
+		       IXGBE_FLAG2_RSS_FIELD_IPV6_UDP)
+static int ixgbe_set_rss_hash_opt(struct ixgbe_adapter *adapter,
+				  struct ethtool_rxnfc *nfc)
+{
+	u32 flags2 = adapter->flags2;
+
+	/*
+	 * RSS does not support anything other than hashing
+	 * to queues on src and dst IPs and ports
+	 */
+	if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST |
+			  RXH_L4_B_0_1 | RXH_L4_B_2_3))
+		return -EINVAL;
+
+	switch (nfc->flow_type) {
+	case TCP_V4_FLOW:
+	case TCP_V6_FLOW:
+		if (!(nfc->data & RXH_IP_SRC) ||
+		    !(nfc->data & RXH_IP_DST) ||
+		    !(nfc->data & RXH_L4_B_0_1) ||
+		    !(nfc->data & RXH_L4_B_2_3))
+			return -EINVAL;
+		break;
+	case UDP_V4_FLOW:
+		if (!(nfc->data & RXH_IP_SRC) ||
+		    !(nfc->data & RXH_IP_DST))
+			return -EINVAL;
+		switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+		case 0:
+			flags2 &= ~IXGBE_FLAG2_RSS_FIELD_IPV4_UDP;
+			break;
+		case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+			flags2 |= IXGBE_FLAG2_RSS_FIELD_IPV4_UDP;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case UDP_V6_FLOW:
+		if (!(nfc->data & RXH_IP_SRC) ||
+		    !(nfc->data & RXH_IP_DST))
+			return -EINVAL;
+		switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+		case 0:
+			flags2 &= ~IXGBE_FLAG2_RSS_FIELD_IPV6_UDP;
+			break;
+		case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+			flags2 |= IXGBE_FLAG2_RSS_FIELD_IPV6_UDP;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case AH_ESP_V4_FLOW:
+	case AH_V4_FLOW:
+	case ESP_V4_FLOW:
+	case SCTP_V4_FLOW:
+	case AH_ESP_V6_FLOW:
+	case AH_V6_FLOW:
+	case ESP_V6_FLOW:
+	case SCTP_V6_FLOW:
+		if (!(nfc->data & RXH_IP_SRC) ||
+		    !(nfc->data & RXH_IP_DST) ||
+		    (nfc->data & RXH_L4_B_0_1) ||
+		    (nfc->data & RXH_L4_B_2_3))
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* if we changed something we need to update flags */
+	if (flags2 != adapter->flags2) {
+		struct ixgbe_hw *hw = &adapter->hw;
+		u32 mrqc;
+		unsigned int pf_pool = adapter->num_vfs;
+
+		if ((hw->mac.type >= ixgbe_mac_X550) &&
+		    (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+			mrqc = IXGBE_READ_REG(hw, IXGBE_PFVFMRQC(pf_pool));
+		else
+			mrqc = IXGBE_READ_REG(hw, IXGBE_MRQC);
+
+		if ((flags2 & UDP_RSS_FLAGS) &&
+		    !(adapter->flags2 & UDP_RSS_FLAGS))
+			e_warn(drv, "enabling UDP RSS: fragmented packets may arrive out of order to the stack above\n");
+
+		adapter->flags2 = flags2;
+
+		/* Perform hash on these packet types */
+		mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4
+		      | IXGBE_MRQC_RSS_FIELD_IPV4_TCP
+		      | IXGBE_MRQC_RSS_FIELD_IPV6
+		      | IXGBE_MRQC_RSS_FIELD_IPV6_TCP;
+
+		mrqc &= ~(IXGBE_MRQC_RSS_FIELD_IPV4_UDP |
+			  IXGBE_MRQC_RSS_FIELD_IPV6_UDP);
+
+		if (flags2 & IXGBE_FLAG2_RSS_FIELD_IPV4_UDP)
+			mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4_UDP;
+
+		if (flags2 & IXGBE_FLAG2_RSS_FIELD_IPV6_UDP)
+			mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_UDP;
+
+		if ((hw->mac.type >= ixgbe_mac_X550) &&
+		    (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+			IXGBE_WRITE_REG(hw, IXGBE_PFVFMRQC(pf_pool), mrqc);
+		else
+			IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
+	}
+
+	return 0;
+}
+
+static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	int ret = -EOPNOTSUPP;
+
+	switch (cmd->cmd) {
+	case ETHTOOL_SRXCLSRLINS:
+		ret = ixgbe_add_ethtool_fdir_entry(adapter, cmd);
+		break;
+	case ETHTOOL_SRXCLSRLDEL:
+		ret = ixgbe_del_ethtool_fdir_entry(adapter, cmd);
+		break;
+	case ETHTOOL_SRXFH:
+		ret = ixgbe_set_rss_hash_opt(adapter, cmd);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static u32 ixgbe_get_rxfh_key_size(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	return sizeof(adapter->rss_key);
+}
+
+static u32 ixgbe_rss_indir_size(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	return ixgbe_rss_indir_tbl_entries(adapter);
+}
+
+static void ixgbe_get_reta(struct ixgbe_adapter *adapter, u32 *indir)
+{
+	int i, reta_size = ixgbe_rss_indir_tbl_entries(adapter);
+
+	for (i = 0; i < reta_size; i++)
+		indir[i] = adapter->rss_indir_tbl[i];
+}
+
+static int ixgbe_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
+			  u8 *hfunc)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	if (hfunc)
+		*hfunc = ETH_RSS_HASH_TOP;
+
+	if (indir)
+		ixgbe_get_reta(adapter, indir);
+
+	if (key)
+		memcpy(key, adapter->rss_key, ixgbe_get_rxfh_key_size(netdev));
+
+	return 0;
+}
+
+static int ixgbe_get_ts_info(struct net_device *dev,
+			     struct ethtool_ts_info *info)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_82599EB:
+		info->so_timestamping =
+			SOF_TIMESTAMPING_TX_SOFTWARE |
+			SOF_TIMESTAMPING_RX_SOFTWARE |
+			SOF_TIMESTAMPING_SOFTWARE |
+			SOF_TIMESTAMPING_TX_HARDWARE |
+			SOF_TIMESTAMPING_RX_HARDWARE |
+			SOF_TIMESTAMPING_RAW_HARDWARE;
+
+		if (adapter->ptp_clock)
+			info->phc_index = ptp_clock_index(adapter->ptp_clock);
+		else
+			info->phc_index = -1;
+
+		info->tx_types =
+			(1 << HWTSTAMP_TX_OFF) |
+			(1 << HWTSTAMP_TX_ON);
+
+		info->rx_filters =
+			(1 << HWTSTAMP_FILTER_NONE) |
+			(1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
+			(1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_SYNC) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
+		break;
+	default:
+		return ethtool_op_get_ts_info(dev, info);
+	}
+	return 0;
+}
+
+static unsigned int ixgbe_max_channels(struct ixgbe_adapter *adapter)
+{
+	unsigned int max_combined;
+	u8 tcs = netdev_get_num_tc(adapter->netdev);
+
+	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
+		/* We only support one q_vector without MSI-X */
+		max_combined = 1;
+	} else if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+		/* SR-IOV currently only allows one queue on the PF */
+		max_combined = 1;
+	} else if (tcs > 1) {
+		/* For DCB report channels per traffic class */
+		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+			/* 8 TC w/ 4 queues per TC */
+			max_combined = 4;
+		} else if (tcs > 4) {
+			/* 8 TC w/ 8 queues per TC */
+			max_combined = 8;
+		} else {
+			/* 4 TC w/ 16 queues per TC */
+			max_combined = 16;
+		}
+	} else if (adapter->atr_sample_rate) {
+		/* support up to 64 queues with ATR */
+		max_combined = IXGBE_MAX_FDIR_INDICES;
+	} else {
+		/* support up to 16 queues with RSS */
+		max_combined = ixgbe_max_rss_indices(adapter);
+	}
+
+	return max_combined;
+}
+
+static void ixgbe_get_channels(struct net_device *dev,
+			       struct ethtool_channels *ch)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+
+	/* report maximum channels */
+	ch->max_combined = ixgbe_max_channels(adapter);
+
+	/* report info for other vector */
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+		ch->max_other = NON_Q_VECTORS;
+		ch->other_count = NON_Q_VECTORS;
+	}
+
+	/* record RSS queues */
+	ch->combined_count = adapter->ring_feature[RING_F_RSS].indices;
+
+	/* nothing else to report if RSS is disabled */
+	if (ch->combined_count == 1)
+		return;
+
+	/* we do not support ATR queueing if SR-IOV is enabled */
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		return;
+
+	/* same thing goes for being DCB enabled */
+	if (netdev_get_num_tc(dev) > 1)
+		return;
+
+	/* if ATR is disabled we can exit */
+	if (!adapter->atr_sample_rate)
+		return;
+
+	/* report flow director queues as maximum channels */
+	ch->combined_count = adapter->ring_feature[RING_F_FDIR].indices;
+}
+
+static int ixgbe_set_channels(struct net_device *dev,
+			      struct ethtool_channels *ch)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	unsigned int count = ch->combined_count;
+	u8 max_rss_indices = ixgbe_max_rss_indices(adapter);
+
+	/* verify they are not requesting separate vectors */
+	if (!count || ch->rx_count || ch->tx_count)
+		return -EINVAL;
+
+	/* verify other_count has not changed */
+	if (ch->other_count != NON_Q_VECTORS)
+		return -EINVAL;
+
+	/* verify the number of channels does not exceed hardware limits */
+	if (count > ixgbe_max_channels(adapter))
+		return -EINVAL;
+
+	/* update feature limits from largest to smallest supported values */
+	adapter->ring_feature[RING_F_FDIR].limit = count;
+
+	/* cap RSS limit */
+	if (count > max_rss_indices)
+		count = max_rss_indices;
+	adapter->ring_feature[RING_F_RSS].limit = count;
+
+#ifdef IXGBE_FCOE
+	/* cap FCoE limit at 8 */
+	if (count > IXGBE_FCRETA_SIZE)
+		count = IXGBE_FCRETA_SIZE;
+	adapter->ring_feature[RING_F_FCOE].limit = count;
+
+#endif
+	/* use setup TC to update any traffic class queue mapping */
+	return ixgbe_setup_tc(dev, netdev_get_num_tc(dev));
+}
+
+static int ixgbe_get_module_info(struct net_device *dev,
+				       struct ethtool_modinfo *modinfo)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 status;
+	u8 sff8472_rev, addr_mode;
+	bool page_swap = false;
+
+	/* Check whether we support SFF-8472 or not */
+	status = hw->phy.ops.read_i2c_eeprom(hw,
+					     IXGBE_SFF_SFF_8472_COMP,
+					     &sff8472_rev);
+	if (status != 0)
+		return -EIO;
+
+	/* addressing mode is not supported */
+	status = hw->phy.ops.read_i2c_eeprom(hw,
+					     IXGBE_SFF_SFF_8472_SWAP,
+					     &addr_mode);
+	if (status != 0)
+		return -EIO;
+
+	if (addr_mode & IXGBE_SFF_ADDRESSING_MODE) {
+		e_err(drv, "Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n");
+		page_swap = true;
+	}
+
+	if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) {
+		/* We have a SFP, but it does not support SFF-8472 */
+		modinfo->type = ETH_MODULE_SFF_8079;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+	} else {
+		/* We have a SFP which supports a revision of SFF-8472. */
+		modinfo->type = ETH_MODULE_SFF_8472;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+	}
+
+	return 0;
+}
+
+static int ixgbe_get_module_eeprom(struct net_device *dev,
+					 struct ethtool_eeprom *ee,
+					 u8 *data)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+	u8 databyte = 0xFF;
+	int i = 0;
+
+	if (ee->len == 0)
+		return -EINVAL;
+
+	for (i = ee->offset; i < ee->offset + ee->len; i++) {
+		/* I2C reads can take long time */
+		if (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+			return -EBUSY;
+
+		if (i < ETH_MODULE_SFF_8079_LEN)
+			status = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte);
+		else
+			status = hw->phy.ops.read_i2c_sff8472(hw, i, &databyte);
+
+		if (status != 0)
+			return -EIO;
+
+		data[i - ee->offset] = databyte;
+	}
+
+	return 0;
+}
+
+static const struct ethtool_ops ixgbe_ethtool_ops = {
+	.get_settings           = ixgbe_get_settings,
+	.set_settings           = ixgbe_set_settings,
+	.get_drvinfo            = ixgbe_get_drvinfo,
+	.get_regs_len           = ixgbe_get_regs_len,
+	.get_regs               = ixgbe_get_regs,
+	.get_wol                = ixgbe_get_wol,
+	.set_wol                = ixgbe_set_wol,
+	.nway_reset             = ixgbe_nway_reset,
+	.get_link               = ethtool_op_get_link,
+	.get_eeprom_len         = ixgbe_get_eeprom_len,
+	.get_eeprom             = ixgbe_get_eeprom,
+	.set_eeprom             = ixgbe_set_eeprom,
+	.get_ringparam          = ixgbe_get_ringparam,
+	.set_ringparam          = ixgbe_set_ringparam,
+	.get_pauseparam         = ixgbe_get_pauseparam,
+	.set_pauseparam         = ixgbe_set_pauseparam,
+	.get_msglevel           = ixgbe_get_msglevel,
+	.set_msglevel           = ixgbe_set_msglevel,
+	.self_test              = ixgbe_diag_test,
+	.get_strings            = ixgbe_get_strings,
+	.set_phys_id            = ixgbe_set_phys_id,
+	.get_sset_count         = ixgbe_get_sset_count,
+	.get_ethtool_stats      = ixgbe_get_ethtool_stats,
+	.get_coalesce           = ixgbe_get_coalesce,
+	.set_coalesce           = ixgbe_set_coalesce,
+	.get_rxnfc		= ixgbe_get_rxnfc,
+	.set_rxnfc		= ixgbe_set_rxnfc,
+	.get_rxfh_indir_size	= ixgbe_rss_indir_size,
+	.get_rxfh_key_size	= ixgbe_get_rxfh_key_size,
+	.get_rxfh		= ixgbe_get_rxfh,
+	.get_channels		= ixgbe_get_channels,
+	.set_channels		= ixgbe_set_channels,
+	.get_ts_info		= ixgbe_get_ts_info,
+	.get_module_info	= ixgbe_get_module_info,
+	.get_module_eeprom	= ixgbe_get_module_eeprom,
+};
+
+void ixgbe_set_ethtool_ops(struct net_device *netdev)
+{
+	netdev->ethtool_ops = &ixgbe_ethtool_ops;
+}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
new file mode 100644
index 000000000..631c603fc
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -0,0 +1,1075 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include <linux/if_ether.h>
+#include <linux/gfp.h>
+#include <linux/if_vlan.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/fc/fc_fs.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/libfc.h>
+#include <scsi/libfcoe.h>
+
+/**
+ * ixgbe_fcoe_clear_ddp - clear the given ddp context
+ * @ddp: ptr to the ixgbe_fcoe_ddp
+ *
+ * Returns : none
+ *
+ */
+static inline void ixgbe_fcoe_clear_ddp(struct ixgbe_fcoe_ddp *ddp)
+{
+	ddp->len = 0;
+	ddp->err = 1;
+	ddp->udl = NULL;
+	ddp->udp = 0UL;
+	ddp->sgl = NULL;
+	ddp->sgc = 0;
+}
+
+/**
+ * ixgbe_fcoe_ddp_put - free the ddp context for a given xid
+ * @netdev: the corresponding net_device
+ * @xid: the xid that corresponding ddp will be freed
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_done
+ * and it is expected to be called by ULD, i.e., FCP layer of libfc
+ * to release the corresponding ddp context when the I/O is done.
+ *
+ * Returns : data length already ddp-ed in bytes
+ */
+int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid)
+{
+	int len;
+	struct ixgbe_fcoe *fcoe;
+	struct ixgbe_adapter *adapter;
+	struct ixgbe_fcoe_ddp *ddp;
+	struct ixgbe_hw *hw;
+	u32 fcbuff;
+
+	if (!netdev)
+		return 0;
+
+	if (xid >= IXGBE_FCOE_DDP_MAX)
+		return 0;
+
+	adapter = netdev_priv(netdev);
+	fcoe = &adapter->fcoe;
+	ddp = &fcoe->ddp[xid];
+	if (!ddp->udl)
+		return 0;
+
+	hw = &adapter->hw;
+	len = ddp->len;
+	/* if no error then skip ddp context invalidation */
+	if (!ddp->err)
+		goto skip_ddpinv;
+
+	if (hw->mac.type == ixgbe_mac_X550) {
+		/* X550 does not require DDP FCoE lock */
+
+		IXGBE_WRITE_REG(hw, IXGBE_FCDFC(0, xid), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_FCDFC(3, xid),
+				(xid | IXGBE_FCFLTRW_WE));
+
+		/* program FCBUFF */
+		IXGBE_WRITE_REG(hw, IXGBE_FCDDC(2, xid), 0);
+
+		/* program FCDMARW */
+		IXGBE_WRITE_REG(hw, IXGBE_FCDDC(3, xid),
+				(xid | IXGBE_FCDMARW_WE));
+
+		/* read FCBUFF to check context invalidated */
+		IXGBE_WRITE_REG(hw, IXGBE_FCDDC(3, xid),
+				(xid | IXGBE_FCDMARW_RE));
+		fcbuff = IXGBE_READ_REG(hw, IXGBE_FCDDC(2, xid));
+	} else {
+		/* other hardware requires DDP FCoE lock */
+		spin_lock_bh(&fcoe->lock);
+		IXGBE_WRITE_REG(hw, IXGBE_FCFLT, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_FCFLTRW,
+				(xid | IXGBE_FCFLTRW_WE));
+		IXGBE_WRITE_REG(hw, IXGBE_FCBUFF, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_FCDMARW,
+				(xid | IXGBE_FCDMARW_WE));
+
+		/* guaranteed to be invalidated after 100us */
+		IXGBE_WRITE_REG(hw, IXGBE_FCDMARW,
+				(xid | IXGBE_FCDMARW_RE));
+		fcbuff = IXGBE_READ_REG(hw, IXGBE_FCBUFF);
+		spin_unlock_bh(&fcoe->lock);
+		}
+
+	if (fcbuff & IXGBE_FCBUFF_VALID)
+		usleep_range(100, 150);
+
+skip_ddpinv:
+	if (ddp->sgl)
+		dma_unmap_sg(&adapter->pdev->dev, ddp->sgl, ddp->sgc,
+			     DMA_FROM_DEVICE);
+	if (ddp->pool) {
+		dma_pool_free(ddp->pool, ddp->udl, ddp->udp);
+		ddp->pool = NULL;
+	}
+
+	ixgbe_fcoe_clear_ddp(ddp);
+
+	return len;
+}
+
+/**
+ * ixgbe_fcoe_ddp_setup - called to set up ddp context
+ * @netdev: the corresponding net_device
+ * @xid: the exchange id requesting ddp
+ * @sgl: the scatter-gather list for this request
+ * @sgc: the number of scatter-gather items
+ *
+ * Returns : 1 for success and 0 for no ddp
+ */
+static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
+				struct scatterlist *sgl, unsigned int sgc,
+				int target_mode)
+{
+	struct ixgbe_adapter *adapter;
+	struct ixgbe_hw *hw;
+	struct ixgbe_fcoe *fcoe;
+	struct ixgbe_fcoe_ddp *ddp;
+	struct ixgbe_fcoe_ddp_pool *ddp_pool;
+	struct scatterlist *sg;
+	unsigned int i, j, dmacount;
+	unsigned int len;
+	static const unsigned int bufflen = IXGBE_FCBUFF_MIN;
+	unsigned int firstoff = 0;
+	unsigned int lastsize;
+	unsigned int thisoff = 0;
+	unsigned int thislen = 0;
+	u32 fcbuff, fcdmarw, fcfltrw, fcrxctl;
+	dma_addr_t addr = 0;
+
+	if (!netdev || !sgl)
+		return 0;
+
+	adapter = netdev_priv(netdev);
+	if (xid >= IXGBE_FCOE_DDP_MAX) {
+		e_warn(drv, "xid=0x%x out-of-range\n", xid);
+		return 0;
+	}
+
+	/* no DDP if we are already down or resetting */
+	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+	    test_bit(__IXGBE_RESETTING, &adapter->state))
+		return 0;
+
+	fcoe = &adapter->fcoe;
+	ddp = &fcoe->ddp[xid];
+	if (ddp->sgl) {
+		e_err(drv, "xid 0x%x w/ non-null sgl=%p nents=%d\n",
+		      xid, ddp->sgl, ddp->sgc);
+		return 0;
+	}
+	ixgbe_fcoe_clear_ddp(ddp);
+
+
+	if (!fcoe->ddp_pool) {
+		e_warn(drv, "No ddp_pool resources allocated\n");
+		return 0;
+	}
+
+	ddp_pool = per_cpu_ptr(fcoe->ddp_pool, get_cpu());
+	if (!ddp_pool->pool) {
+		e_warn(drv, "xid=0x%x no ddp pool for fcoe\n", xid);
+		goto out_noddp;
+	}
+
+	/* setup dma from scsi command sgl */
+	dmacount = dma_map_sg(&adapter->pdev->dev, sgl, sgc, DMA_FROM_DEVICE);
+	if (dmacount == 0) {
+		e_err(drv, "xid 0x%x DMA map error\n", xid);
+		goto out_noddp;
+	}
+
+	/* alloc the udl from per cpu ddp pool */
+	ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_ATOMIC, &ddp->udp);
+	if (!ddp->udl) {
+		e_err(drv, "failed allocated ddp context\n");
+		goto out_noddp_unmap;
+	}
+	ddp->pool = ddp_pool->pool;
+	ddp->sgl = sgl;
+	ddp->sgc = sgc;
+
+	j = 0;
+	for_each_sg(sgl, sg, dmacount, i) {
+		addr = sg_dma_address(sg);
+		len = sg_dma_len(sg);
+		while (len) {
+			/* max number of buffers allowed in one DDP context */
+			if (j >= IXGBE_BUFFCNT_MAX) {
+				ddp_pool->noddp++;
+				goto out_noddp_free;
+			}
+
+			/* get the offset of length of current buffer */
+			thisoff = addr & ((dma_addr_t)bufflen - 1);
+			thislen = min((bufflen - thisoff), len);
+			/*
+			 * all but the 1st buffer (j == 0)
+			 * must be aligned on bufflen
+			 */
+			if ((j != 0) && (thisoff))
+				goto out_noddp_free;
+			/*
+			 * all but the last buffer
+			 * ((i == (dmacount - 1)) && (thislen == len))
+			 * must end at bufflen
+			 */
+			if (((i != (dmacount - 1)) || (thislen != len))
+			    && ((thislen + thisoff) != bufflen))
+				goto out_noddp_free;
+
+			ddp->udl[j] = (u64)(addr - thisoff);
+			/* only the first buffer may have none-zero offset */
+			if (j == 0)
+				firstoff = thisoff;
+			len -= thislen;
+			addr += thislen;
+			j++;
+		}
+	}
+	/* only the last buffer may have non-full bufflen */
+	lastsize = thisoff + thislen;
+
+	/*
+	 * lastsize can not be buffer len.
+	 * If it is then adding another buffer with lastsize = 1.
+	 */
+	if (lastsize == bufflen) {
+		if (j >= IXGBE_BUFFCNT_MAX) {
+			ddp_pool->noddp_ext_buff++;
+			goto out_noddp_free;
+		}
+
+		ddp->udl[j] = (u64)(fcoe->extra_ddp_buffer_dma);
+		j++;
+		lastsize = 1;
+	}
+	put_cpu();
+
+	fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
+	fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT);
+	fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
+	/* Set WRCONTX bit to allow DDP for target */
+	if (target_mode)
+		fcbuff |= (IXGBE_FCBUFF_WRCONTX);
+	fcbuff |= (IXGBE_FCBUFF_VALID);
+
+	fcdmarw = xid;
+	fcdmarw |= IXGBE_FCDMARW_WE;
+	fcdmarw |= (lastsize << IXGBE_FCDMARW_LASTSIZE_SHIFT);
+
+	fcfltrw = xid;
+	fcfltrw |= IXGBE_FCFLTRW_WE;
+
+	/* program DMA context */
+	hw = &adapter->hw;
+
+	/* turn on last frame indication for target mode as FCP_RSPtarget is
+	 * supposed to send FCP_RSP when it is done. */
+	if (target_mode && !test_bit(__IXGBE_FCOE_TARGET, &fcoe->mode)) {
+		set_bit(__IXGBE_FCOE_TARGET, &fcoe->mode);
+		fcrxctl = IXGBE_READ_REG(hw, IXGBE_FCRXCTRL);
+		fcrxctl |= IXGBE_FCRXCTRL_LASTSEQH;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL, fcrxctl);
+	}
+
+	if (hw->mac.type == ixgbe_mac_X550) {
+		/* X550 does not require DDP lock */
+
+		IXGBE_WRITE_REG(hw, IXGBE_FCDDC(0, xid),
+				ddp->udp & DMA_BIT_MASK(32));
+		IXGBE_WRITE_REG(hw, IXGBE_FCDDC(1, xid), (u64)ddp->udp >> 32);
+		IXGBE_WRITE_REG(hw, IXGBE_FCDDC(2, xid), fcbuff);
+		IXGBE_WRITE_REG(hw, IXGBE_FCDDC(3, xid), fcdmarw);
+		/* program filter context */
+		IXGBE_WRITE_REG(hw, IXGBE_FCDFC(0, xid), IXGBE_FCFLT_VALID);
+		IXGBE_WRITE_REG(hw, IXGBE_FCDFC(1, xid), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_FCDFC(3, xid), fcfltrw);
+	} else {
+		/* DDP lock for indirect DDP context access */
+		spin_lock_bh(&fcoe->lock);
+
+		IXGBE_WRITE_REG(hw, IXGBE_FCPTRL, ddp->udp & DMA_BIT_MASK(32));
+		IXGBE_WRITE_REG(hw, IXGBE_FCPTRH, (u64)ddp->udp >> 32);
+		IXGBE_WRITE_REG(hw, IXGBE_FCBUFF, fcbuff);
+		IXGBE_WRITE_REG(hw, IXGBE_FCDMARW, fcdmarw);
+		/* program filter context */
+		IXGBE_WRITE_REG(hw, IXGBE_FCPARAM, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_FCFLT, IXGBE_FCFLT_VALID);
+		IXGBE_WRITE_REG(hw, IXGBE_FCFLTRW, fcfltrw);
+
+		spin_unlock_bh(&fcoe->lock);
+	}
+
+	return 1;
+
+out_noddp_free:
+	dma_pool_free(ddp->pool, ddp->udl, ddp->udp);
+	ixgbe_fcoe_clear_ddp(ddp);
+
+out_noddp_unmap:
+	dma_unmap_sg(&adapter->pdev->dev, sgl, sgc, DMA_FROM_DEVICE);
+out_noddp:
+	put_cpu();
+	return 0;
+}
+
+/**
+ * ixgbe_fcoe_ddp_get - called to set up ddp context in initiator mode
+ * @netdev: the corresponding net_device
+ * @xid: the exchange id requesting ddp
+ * @sgl: the scatter-gather list for this request
+ * @sgc: the number of scatter-gather items
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_setup
+ * and is expected to be called from ULD, e.g., FCP layer of libfc
+ * to set up ddp for the corresponding xid of the given sglist for
+ * the corresponding I/O.
+ *
+ * Returns : 1 for success and 0 for no ddp
+ */
+int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
+		       struct scatterlist *sgl, unsigned int sgc)
+{
+	return ixgbe_fcoe_ddp_setup(netdev, xid, sgl, sgc, 0);
+}
+
+/**
+ * ixgbe_fcoe_ddp_target - called to set up ddp context in target mode
+ * @netdev: the corresponding net_device
+ * @xid: the exchange id requesting ddp
+ * @sgl: the scatter-gather list for this request
+ * @sgc: the number of scatter-gather items
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_target
+ * and is expected to be called from ULD, e.g., FCP layer of libfc
+ * to set up ddp for the corresponding xid of the given sglist for
+ * the corresponding I/O. The DDP in target mode is a write I/O request
+ * from the initiator.
+ *
+ * Returns : 1 for success and 0 for no ddp
+ */
+int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid,
+			    struct scatterlist *sgl, unsigned int sgc)
+{
+	return ixgbe_fcoe_ddp_setup(netdev, xid, sgl, sgc, 1);
+}
+
+/**
+ * ixgbe_fcoe_ddp - check ddp status and mark it done
+ * @adapter: ixgbe adapter
+ * @rx_desc: advanced rx descriptor
+ * @skb: the skb holding the received data
+ *
+ * This checks ddp status.
+ *
+ * Returns : < 0 indicates an error or not a FCiE ddp, 0 indicates
+ * not passing the skb to ULD, > 0 indicates is the length of data
+ * being ddped.
+ */
+int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
+		   union ixgbe_adv_rx_desc *rx_desc,
+		   struct sk_buff *skb)
+{
+	int rc = -EINVAL;
+	struct ixgbe_fcoe *fcoe;
+	struct ixgbe_fcoe_ddp *ddp;
+	struct fc_frame_header *fh;
+	struct fcoe_crc_eof *crc;
+	__le32 fcerr = ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_FCERR);
+	__le32 ddp_err;
+	int ddp_max;
+	u32 fctl;
+	u16 xid;
+
+	if (fcerr == cpu_to_le32(IXGBE_FCERR_BADCRC))
+		skb->ip_summed = CHECKSUM_NONE;
+	else
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	if (eth_hdr(skb)->h_proto == htons(ETH_P_8021Q))
+		fh = (struct fc_frame_header *)(skb->data +
+			sizeof(struct vlan_hdr) + sizeof(struct fcoe_hdr));
+	else
+		fh = (struct fc_frame_header *)(skb->data +
+			sizeof(struct fcoe_hdr));
+
+	fctl = ntoh24(fh->fh_f_ctl);
+	if (fctl & FC_FC_EX_CTX)
+		xid =  be16_to_cpu(fh->fh_ox_id);
+	else
+		xid =  be16_to_cpu(fh->fh_rx_id);
+
+	ddp_max = IXGBE_FCOE_DDP_MAX;
+	/* X550 has different DDP Max limit */
+	if (adapter->hw.mac.type == ixgbe_mac_X550)
+		ddp_max = IXGBE_FCOE_DDP_MAX_X550;
+	if (xid >= ddp_max)
+		return -EINVAL;
+
+	fcoe = &adapter->fcoe;
+	ddp = &fcoe->ddp[xid];
+	if (!ddp->udl)
+		return -EINVAL;
+
+	ddp_err = ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_FCEOFE |
+					      IXGBE_RXDADV_ERR_FCERR);
+	if (ddp_err)
+		return -EINVAL;
+
+	switch (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_FCSTAT)) {
+	/* return 0 to bypass going to ULD for DDPed data */
+	case cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_DDP):
+		/* update length of DDPed data */
+		ddp->len = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+		rc = 0;
+		break;
+	/* unmap the sg list when FCPRSP is received */
+	case cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_FCPRSP):
+		dma_unmap_sg(&adapter->pdev->dev, ddp->sgl,
+			     ddp->sgc, DMA_FROM_DEVICE);
+		ddp->err = ddp_err;
+		ddp->sgl = NULL;
+		ddp->sgc = 0;
+		/* fall through */
+	/* if DDP length is present pass it through to ULD */
+	case cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_NODDP):
+		/* update length of DDPed data */
+		ddp->len = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+		if (ddp->len)
+			rc = ddp->len;
+		break;
+	/* no match will return as an error */
+	case cpu_to_le32(IXGBE_RXDADV_STAT_FCSTAT_NOMTCH):
+	default:
+		break;
+	}
+
+	/* In target mode, check the last data frame of the sequence.
+	 * For DDP in target mode, data is already DDPed but the header
+	 * indication of the last data frame ould allow is to tell if we
+	 * got all the data and the ULP can send FCP_RSP back, as this is
+	 * not a full fcoe frame, we fill the trailer here so it won't be
+	 * dropped by the ULP stack.
+	 */
+	if ((fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA) &&
+	    (fctl & FC_FC_END_SEQ)) {
+		skb_linearize(skb);
+		crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc));
+		crc->fcoe_eof = FC_EOF_T;
+	}
+
+	return rc;
+}
+
+/**
+ * ixgbe_fso - ixgbe FCoE Sequence Offload (FSO)
+ * @tx_ring: tx desc ring
+ * @first: first tx_buffer structure containing skb, tx_flags, and protocol
+ * @hdr_len: hdr_len to be returned
+ *
+ * This sets up large send offload for FCoE
+ *
+ * Returns : 0 indicates success, < 0 for error
+ */
+int ixgbe_fso(struct ixgbe_ring *tx_ring,
+	      struct ixgbe_tx_buffer *first,
+	      u8 *hdr_len)
+{
+	struct sk_buff *skb = first->skb;
+	struct fc_frame_header *fh;
+	u32 vlan_macip_lens;
+	u32 fcoe_sof_eof = 0;
+	u32 mss_l4len_idx;
+	u8 sof, eof;
+
+	if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) {
+		dev_err(tx_ring->dev, "Wrong gso type %d:expecting SKB_GSO_FCOE\n",
+			skb_shinfo(skb)->gso_type);
+		return -EINVAL;
+	}
+
+	/* resets the header to point fcoe/fc */
+	skb_set_network_header(skb, skb->mac_len);
+	skb_set_transport_header(skb, skb->mac_len +
+				 sizeof(struct fcoe_hdr));
+
+	/* sets up SOF and ORIS */
+	sof = ((struct fcoe_hdr *)skb_network_header(skb))->fcoe_sof;
+	switch (sof) {
+	case FC_SOF_I2:
+		fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_ORIS;
+		break;
+	case FC_SOF_I3:
+		fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_SOF |
+			       IXGBE_ADVTXD_FCOEF_ORIS;
+		break;
+	case FC_SOF_N2:
+		break;
+	case FC_SOF_N3:
+		fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_SOF;
+		break;
+	default:
+		dev_warn(tx_ring->dev, "unknown sof = 0x%x\n", sof);
+		return -EINVAL;
+	}
+
+	/* the first byte of the last dword is EOF */
+	skb_copy_bits(skb, skb->len - 4, &eof, 1);
+	/* sets up EOF and ORIE */
+	switch (eof) {
+	case FC_EOF_N:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N;
+		break;
+	case FC_EOF_T:
+		/* lso needs ORIE */
+		if (skb_is_gso(skb))
+			fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N |
+					IXGBE_ADVTXD_FCOEF_ORIE;
+		else
+			fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_T;
+		break;
+	case FC_EOF_NI:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_NI;
+		break;
+	case FC_EOF_A:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A;
+		break;
+	default:
+		dev_warn(tx_ring->dev, "unknown eof = 0x%x\n", eof);
+		return -EINVAL;
+	}
+
+	/* sets up PARINC indicating data offset */
+	fh = (struct fc_frame_header *)skb_transport_header(skb);
+	if (fh->fh_f_ctl[2] & FC_FC_REL_OFF)
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_PARINC;
+
+	/* include trailer in headlen as it is replicated per frame */
+	*hdr_len = sizeof(struct fcoe_crc_eof);
+
+	/* hdr_len includes fc_hdr if FCoE LSO is enabled */
+	if (skb_is_gso(skb)) {
+		*hdr_len += skb_transport_offset(skb) +
+			    sizeof(struct fc_frame_header);
+		/* update gso_segs and bytecount */
+		first->gso_segs = DIV_ROUND_UP(skb->len - *hdr_len,
+					       skb_shinfo(skb)->gso_size);
+		first->bytecount += (first->gso_segs - 1) * *hdr_len;
+		first->tx_flags |= IXGBE_TX_FLAGS_TSO;
+	}
+
+	/* set flag indicating FCOE to ixgbe_tx_map call */
+	first->tx_flags |= IXGBE_TX_FLAGS_FCOE | IXGBE_TX_FLAGS_CC;
+
+	/* mss_l4len_id: use 0 for FSO as TSO, no need for L4LEN */
+	mss_l4len_idx = skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT;
+
+	/* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
+	vlan_macip_lens = skb_transport_offset(skb) +
+			  sizeof(struct fc_frame_header);
+	vlan_macip_lens |= (skb_transport_offset(skb) - 4)
+			   << IXGBE_ADVTXD_MACLEN_SHIFT;
+	vlan_macip_lens |= first->tx_flags & IXGBE_TX_FLAGS_VLAN_MASK;
+
+	/* write context desc */
+	ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, fcoe_sof_eof,
+			  IXGBE_ADVTXT_TUCMD_FCOE, mss_l4len_idx);
+
+	return 0;
+}
+
+static void ixgbe_fcoe_dma_pool_free(struct ixgbe_fcoe *fcoe, unsigned int cpu)
+{
+	struct ixgbe_fcoe_ddp_pool *ddp_pool;
+
+	ddp_pool = per_cpu_ptr(fcoe->ddp_pool, cpu);
+	if (ddp_pool->pool)
+		dma_pool_destroy(ddp_pool->pool);
+	ddp_pool->pool = NULL;
+}
+
+static int ixgbe_fcoe_dma_pool_alloc(struct ixgbe_fcoe *fcoe,
+				     struct device *dev,
+				     unsigned int cpu)
+{
+	struct ixgbe_fcoe_ddp_pool *ddp_pool;
+	struct dma_pool *pool;
+	char pool_name[32];
+
+	snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%u", cpu);
+
+	pool = dma_pool_create(pool_name, dev, IXGBE_FCPTR_MAX,
+			       IXGBE_FCPTR_ALIGN, PAGE_SIZE);
+	if (!pool)
+		return -ENOMEM;
+
+	ddp_pool = per_cpu_ptr(fcoe->ddp_pool, cpu);
+	ddp_pool->pool = pool;
+	ddp_pool->noddp = 0;
+	ddp_pool->noddp_ext_buff = 0;
+
+	return 0;
+}
+
+/**
+ * ixgbe_configure_fcoe - configures registers for fcoe at start
+ * @adapter: ptr to ixgbe adapter
+ *
+ * This sets up FCoE related registers
+ *
+ * Returns : none
+ */
+void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_ring_feature *fcoe = &adapter->ring_feature[RING_F_FCOE];
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i, fcoe_q, fcoe_i, fcoe_q_h = 0;
+	int fcreta_size;
+	u32 etqf;
+
+	/* Minimal functionality for FCoE requires at least CRC offloads */
+	if (!(adapter->netdev->features & NETIF_F_FCOE_CRC))
+		return;
+
+	/* Enable L2 EtherType filter for FCoE, needed for FCoE CRC and DDP */
+	etqf = ETH_P_FCOE | IXGBE_ETQF_FCOE | IXGBE_ETQF_FILTER_EN;
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+		etqf |= IXGBE_ETQF_POOL_ENABLE;
+		etqf |= VMDQ_P(0) << IXGBE_ETQF_POOL_SHIFT;
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FCOE), etqf);
+	IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0);
+
+	/* leave registers un-configured if FCoE is disabled */
+	if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
+		return;
+
+	/* Use one or more Rx queues for FCoE by redirection table */
+	fcreta_size = IXGBE_FCRETA_SIZE;
+	if (adapter->hw.mac.type == ixgbe_mac_X550)
+		fcreta_size = IXGBE_FCRETA_SIZE_X550;
+
+	for (i = 0; i < fcreta_size; i++) {
+		if (adapter->hw.mac.type == ixgbe_mac_X550) {
+			int fcoe_i_h = fcoe->offset + ((i + fcreta_size) %
+							fcoe->indices);
+			fcoe_q_h = adapter->rx_ring[fcoe_i_h]->reg_idx;
+			fcoe_q_h = (fcoe_q_h << IXGBE_FCRETA_ENTRY_HIGH_SHIFT) &
+				   IXGBE_FCRETA_ENTRY_HIGH_MASK;
+		}
+
+		fcoe_i = fcoe->offset + (i % fcoe->indices);
+		fcoe_i &= IXGBE_FCRETA_ENTRY_MASK;
+		fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
+		fcoe_q |= fcoe_q_h;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRETA(i), fcoe_q);
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA);
+
+	/* Enable L2 EtherType filter for FIP */
+	etqf = ETH_P_FIP | IXGBE_ETQF_FILTER_EN;
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+		etqf |= IXGBE_ETQF_POOL_ENABLE;
+		etqf |= VMDQ_P(0) << IXGBE_ETQF_POOL_SHIFT;
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FIP), etqf);
+
+	/* Send FIP frames to the first FCoE queue */
+	fcoe_q = adapter->rx_ring[fcoe->offset]->reg_idx;
+	IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FIP),
+			IXGBE_ETQS_QUEUE_EN |
+			(fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
+
+	/* Configure FCoE Rx control */
+	IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL,
+			IXGBE_FCRXCTRL_FCCRCBO |
+			(FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT));
+}
+
+/**
+ * ixgbe_free_fcoe_ddp_resources - release all fcoe ddp context resources
+ * @adapter : ixgbe adapter
+ *
+ * Cleans up outstanding ddp context resources
+ *
+ * Returns : none
+ */
+void ixgbe_free_fcoe_ddp_resources(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+	int cpu, i, ddp_max;
+
+	/* do nothing if no DDP pools were allocated */
+	if (!fcoe->ddp_pool)
+		return;
+
+	ddp_max = IXGBE_FCOE_DDP_MAX;
+	/* X550 has different DDP Max limit */
+	if (adapter->hw.mac.type == ixgbe_mac_X550)
+		ddp_max = IXGBE_FCOE_DDP_MAX_X550;
+
+	for (i = 0; i < ddp_max; i++)
+		ixgbe_fcoe_ddp_put(adapter->netdev, i);
+
+	for_each_possible_cpu(cpu)
+		ixgbe_fcoe_dma_pool_free(fcoe, cpu);
+
+	dma_unmap_single(&adapter->pdev->dev,
+			 fcoe->extra_ddp_buffer_dma,
+			 IXGBE_FCBUFF_MIN,
+			 DMA_FROM_DEVICE);
+	kfree(fcoe->extra_ddp_buffer);
+
+	fcoe->extra_ddp_buffer = NULL;
+	fcoe->extra_ddp_buffer_dma = 0;
+}
+
+/**
+ * ixgbe_setup_fcoe_ddp_resources - setup all fcoe ddp context resources
+ * @adapter: ixgbe adapter
+ *
+ * Sets up ddp context resouces
+ *
+ * Returns : 0 indicates success or -EINVAL on failure
+ */
+int ixgbe_setup_fcoe_ddp_resources(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+	struct device *dev = &adapter->pdev->dev;
+	void *buffer;
+	dma_addr_t dma;
+	unsigned int cpu;
+
+	/* do nothing if no DDP pools were allocated */
+	if (!fcoe->ddp_pool)
+		return 0;
+
+	/* Extra buffer to be shared by all DDPs for HW work around */
+	buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC);
+	if (!buffer)
+		return -ENOMEM;
+
+	dma = dma_map_single(dev, buffer, IXGBE_FCBUFF_MIN, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dev, dma)) {
+		e_err(drv, "failed to map extra DDP buffer\n");
+		kfree(buffer);
+		return -ENOMEM;
+	}
+
+	fcoe->extra_ddp_buffer = buffer;
+	fcoe->extra_ddp_buffer_dma = dma;
+
+	/* allocate pci pool for each cpu */
+	for_each_possible_cpu(cpu) {
+		int err = ixgbe_fcoe_dma_pool_alloc(fcoe, dev, cpu);
+		if (!err)
+			continue;
+
+		e_err(drv, "failed to alloc DDP pool on cpu:%d\n", cpu);
+		ixgbe_free_fcoe_ddp_resources(adapter);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int ixgbe_fcoe_ddp_enable(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+
+	if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE))
+		return -EINVAL;
+
+	fcoe->ddp_pool = alloc_percpu(struct ixgbe_fcoe_ddp_pool);
+
+	if (!fcoe->ddp_pool) {
+		e_err(drv, "failed to allocate percpu DDP resources\n");
+		return -ENOMEM;
+	}
+
+	adapter->netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
+	/* X550 has different DDP Max limit */
+	if (adapter->hw.mac.type == ixgbe_mac_X550)
+		adapter->netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX_X550 - 1;
+
+	return 0;
+}
+
+static void ixgbe_fcoe_ddp_disable(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+
+	adapter->netdev->fcoe_ddp_xid = 0;
+
+	if (!fcoe->ddp_pool)
+		return;
+
+	free_percpu(fcoe->ddp_pool);
+	fcoe->ddp_pool = NULL;
+}
+
+/**
+ * ixgbe_fcoe_enable - turn on FCoE offload feature
+ * @netdev: the corresponding netdev
+ *
+ * Turns on FCoE offload feature in 82599.
+ *
+ * Returns : 0 indicates success or -EINVAL on failure
+ */
+int ixgbe_fcoe_enable(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+
+	atomic_inc(&fcoe->refcnt);
+
+	if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE))
+		return -EINVAL;
+
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+		return -EINVAL;
+
+	e_info(drv, "Enabling FCoE offload features.\n");
+
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		e_warn(probe, "Enabling FCoE on PF will disable legacy VFs\n");
+
+	if (netif_running(netdev))
+		netdev->netdev_ops->ndo_stop(netdev);
+
+	/* Allocate per CPU memory to track DDP pools */
+	ixgbe_fcoe_ddp_enable(adapter);
+
+	/* enable FCoE and notify stack */
+	adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
+	netdev->features |= NETIF_F_FCOE_MTU;
+	netdev_features_change(netdev);
+
+	/* release existing queues and reallocate them */
+	ixgbe_clear_interrupt_scheme(adapter);
+	ixgbe_init_interrupt_scheme(adapter);
+
+	if (netif_running(netdev))
+		netdev->netdev_ops->ndo_open(netdev);
+
+	return 0;
+}
+
+/**
+ * ixgbe_fcoe_disable - turn off FCoE offload feature
+ * @netdev: the corresponding netdev
+ *
+ * Turns off FCoE offload feature in 82599.
+ *
+ * Returns : 0 indicates success or -EINVAL on failure
+ */
+int ixgbe_fcoe_disable(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	if (!atomic_dec_and_test(&adapter->fcoe.refcnt))
+		return -EINVAL;
+
+	if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
+		return -EINVAL;
+
+	e_info(drv, "Disabling FCoE offload features.\n");
+	if (netif_running(netdev))
+		netdev->netdev_ops->ndo_stop(netdev);
+
+	/* Free per CPU memory to track DDP pools */
+	ixgbe_fcoe_ddp_disable(adapter);
+
+	/* disable FCoE and notify stack */
+	adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+	netdev->features &= ~NETIF_F_FCOE_MTU;
+
+	netdev_features_change(netdev);
+
+	/* release existing queues and reallocate them */
+	ixgbe_clear_interrupt_scheme(adapter);
+	ixgbe_init_interrupt_scheme(adapter);
+
+	if (netif_running(netdev))
+		netdev->netdev_ops->ndo_open(netdev);
+
+	return 0;
+}
+
+/**
+ * ixgbe_fcoe_get_wwn - get world wide name for the node or the port
+ * @netdev : ixgbe adapter
+ * @wwn : the world wide name
+ * @type: the type of world wide name
+ *
+ * Returns the node or port world wide name if both the prefix and the san
+ * mac address are valid, then the wwn is formed based on the NAA-2 for
+ * IEEE Extended name identifier (ref. to T10 FC-LS Spec., Sec. 15.3).
+ *
+ * Returns : 0 on success
+ */
+int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type)
+{
+	u16 prefix = 0xffff;
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_mac_info *mac = &adapter->hw.mac;
+
+	switch (type) {
+	case NETDEV_FCOE_WWNN:
+		prefix = mac->wwnn_prefix;
+		break;
+	case NETDEV_FCOE_WWPN:
+		prefix = mac->wwpn_prefix;
+		break;
+	default:
+		break;
+	}
+
+	if ((prefix != 0xffff) &&
+	    is_valid_ether_addr(mac->san_addr)) {
+		*wwn = ((u64) prefix << 48) |
+		       ((u64) mac->san_addr[0] << 40) |
+		       ((u64) mac->san_addr[1] << 32) |
+		       ((u64) mac->san_addr[2] << 24) |
+		       ((u64) mac->san_addr[3] << 16) |
+		       ((u64) mac->san_addr[4] << 8)  |
+		       ((u64) mac->san_addr[5]);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+/**
+ * ixgbe_fcoe_get_hbainfo - get FCoE HBA information
+ * @netdev : ixgbe adapter
+ * @info : HBA information
+ *
+ * Returns ixgbe HBA information
+ *
+ * Returns : 0 on success
+ */
+int ixgbe_fcoe_get_hbainfo(struct net_device *netdev,
+			   struct netdev_fcoe_hbainfo *info)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i, pos;
+	u8 buf[8];
+
+	if (!info)
+		return -EINVAL;
+
+	/* Don't return information on unsupported devices */
+	if (hw->mac.type != ixgbe_mac_82599EB &&
+	    hw->mac.type != ixgbe_mac_X540)
+		return -EINVAL;
+
+	/* Manufacturer */
+	snprintf(info->manufacturer, sizeof(info->manufacturer),
+		 "Intel Corporation");
+
+	/* Serial Number */
+
+	/* Get the PCI-e Device Serial Number Capability */
+	pos = pci_find_ext_capability(adapter->pdev, PCI_EXT_CAP_ID_DSN);
+	if (pos) {
+		pos += 4;
+		for (i = 0; i < 8; i++)
+			pci_read_config_byte(adapter->pdev, pos + i, &buf[i]);
+
+		snprintf(info->serial_number, sizeof(info->serial_number),
+			 "%02X%02X%02X%02X%02X%02X%02X%02X",
+			 buf[7], buf[6], buf[5], buf[4],
+			 buf[3], buf[2], buf[1], buf[0]);
+	} else
+		snprintf(info->serial_number, sizeof(info->serial_number),
+			 "Unknown");
+
+	/* Hardware Version */
+	snprintf(info->hardware_version,
+		 sizeof(info->hardware_version),
+		 "Rev %d", hw->revision_id);
+	/* Driver Name/Version */
+	snprintf(info->driver_version,
+		 sizeof(info->driver_version),
+		 "%s v%s",
+		 ixgbe_driver_name,
+		 ixgbe_driver_version);
+	/* Firmware Version */
+	snprintf(info->firmware_version,
+		 sizeof(info->firmware_version),
+		 "0x%08x",
+		 (adapter->eeprom_verh << 16) |
+		  adapter->eeprom_verl);
+
+	/* Model */
+	if (hw->mac.type == ixgbe_mac_82599EB) {
+		snprintf(info->model,
+			 sizeof(info->model),
+			 "Intel 82599");
+	} else {
+		snprintf(info->model,
+			 sizeof(info->model),
+			 "Intel X540");
+	}
+
+	/* Model Description */
+	snprintf(info->model_description,
+		 sizeof(info->model_description),
+		 "%s",
+		 ixgbe_default_device_descr);
+
+	return 0;
+}
+
+/**
+ * ixgbe_fcoe_get_tc - get the current TC that fcoe is mapped to
+ * @adapter - pointer to the device adapter structure
+ *
+ * Return : TC that FCoE is mapped to
+ */
+u8 ixgbe_fcoe_get_tc(struct ixgbe_adapter *adapter)
+{
+#ifdef CONFIG_IXGBE_DCB
+	return netdev_get_prio_tc_map(adapter->netdev, adapter->fcoe.up);
+#else
+	return 0;
+#endif
+}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
new file mode 100644
index 000000000..38385876e
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
@@ -0,0 +1,88 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_FCOE_H
+#define _IXGBE_FCOE_H
+
+#include <scsi/fc/fc_fs.h>
+#include <scsi/fc/fc_fcoe.h>
+
+/* shift bits within STAT fo FCSTAT */
+#define IXGBE_RXDADV_FCSTAT_SHIFT	4
+
+/* ddp user buffer */
+#define IXGBE_BUFFCNT_MAX	256	/* 8 bits bufcnt */
+#define IXGBE_FCPTR_ALIGN	16
+#define IXGBE_FCPTR_MAX	(IXGBE_BUFFCNT_MAX * sizeof(dma_addr_t))
+#define IXGBE_FCBUFF_4KB	0x0
+#define IXGBE_FCBUFF_8KB	0x1
+#define IXGBE_FCBUFF_16KB	0x2
+#define IXGBE_FCBUFF_64KB	0x3
+#define IXGBE_FCBUFF_MAX	65536	/* 64KB max */
+#define IXGBE_FCBUFF_MIN	4096	/* 4KB min */
+#define IXGBE_FCOE_DDP_MAX	512	/* 9 bits xid */
+#define IXGBE_FCOE_DDP_MAX_X550	2048	/* 11 bits xid */
+
+/* Default traffic class to use for FCoE */
+#define IXGBE_FCOE_DEFTC	3
+
+/* fcerr */
+#define IXGBE_FCERR_BADCRC       0x00100000
+
+/* FCoE DDP for target mode */
+#define __IXGBE_FCOE_TARGET	1
+
+struct ixgbe_fcoe_ddp {
+	int len;
+	u32 err;
+	unsigned int sgc;
+	struct scatterlist *sgl;
+	dma_addr_t udp;
+	u64 *udl;
+	struct dma_pool *pool;
+};
+
+/* per cpu variables */
+struct ixgbe_fcoe_ddp_pool {
+	struct dma_pool *pool;
+	u64 noddp;
+	u64 noddp_ext_buff;
+};
+
+struct ixgbe_fcoe {
+	struct ixgbe_fcoe_ddp_pool __percpu *ddp_pool;
+	atomic_t refcnt;
+	spinlock_t lock;
+	struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX_X550];
+	void *extra_ddp_buffer;
+	dma_addr_t extra_ddp_buffer_dma;
+	unsigned long mode;
+	u8 up;
+};
+
+#endif /* _IXGBE_FCOE_H */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
new file mode 100644
index 000000000..68e1e757e
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -0,0 +1,1221 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include "ixgbe_sriov.h"
+
+#ifdef CONFIG_IXGBE_DCB
+/**
+ * ixgbe_cache_ring_dcb_sriov - Descriptor ring to register mapping for SR-IOV
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for SR-IOV to the assigned rings.  It
+ * will also try to cache the proper offsets if RSS/FCoE are enabled along
+ * with VMDq.
+ *
+ **/
+static bool ixgbe_cache_ring_dcb_sriov(struct ixgbe_adapter *adapter)
+{
+#ifdef IXGBE_FCOE
+	struct ixgbe_ring_feature *fcoe = &adapter->ring_feature[RING_F_FCOE];
+#endif /* IXGBE_FCOE */
+	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
+	int i;
+	u16 reg_idx;
+	u8 tcs = netdev_get_num_tc(adapter->netdev);
+
+	/* verify we have DCB queueing enabled before proceeding */
+	if (tcs <= 1)
+		return false;
+
+	/* verify we have VMDq enabled before proceeding */
+	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+		return false;
+
+	/* start at VMDq register offset for SR-IOV enabled setups */
+	reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask);
+	for (i = 0; i < adapter->num_rx_queues; i++, reg_idx++) {
+		/* If we are greater than indices move to next pool */
+		if ((reg_idx & ~vmdq->mask) >= tcs)
+			reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask);
+		adapter->rx_ring[i]->reg_idx = reg_idx;
+	}
+
+	reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask);
+	for (i = 0; i < adapter->num_tx_queues; i++, reg_idx++) {
+		/* If we are greater than indices move to next pool */
+		if ((reg_idx & ~vmdq->mask) >= tcs)
+			reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask);
+		adapter->tx_ring[i]->reg_idx = reg_idx;
+	}
+
+#ifdef IXGBE_FCOE
+	/* nothing to do if FCoE is disabled */
+	if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
+		return true;
+
+	/* The work is already done if the FCoE ring is shared */
+	if (fcoe->offset < tcs)
+		return true;
+
+	/* The FCoE rings exist separately, we need to move their reg_idx */
+	if (fcoe->indices) {
+		u16 queues_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
+		u8 fcoe_tc = ixgbe_fcoe_get_tc(adapter);
+
+		reg_idx = (vmdq->offset + vmdq->indices) * queues_per_pool;
+		for (i = fcoe->offset; i < adapter->num_rx_queues; i++) {
+			reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask) + fcoe_tc;
+			adapter->rx_ring[i]->reg_idx = reg_idx;
+			reg_idx++;
+		}
+
+		reg_idx = (vmdq->offset + vmdq->indices) * queues_per_pool;
+		for (i = fcoe->offset; i < adapter->num_tx_queues; i++) {
+			reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask) + fcoe_tc;
+			adapter->tx_ring[i]->reg_idx = reg_idx;
+			reg_idx++;
+		}
+	}
+
+#endif /* IXGBE_FCOE */
+	return true;
+}
+
+/* ixgbe_get_first_reg_idx - Return first register index associated with ring */
+static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc,
+				    unsigned int *tx, unsigned int *rx)
+{
+	struct net_device *dev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u8 num_tcs = netdev_get_num_tc(dev);
+
+	*tx = 0;
+	*rx = 0;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		/* TxQs/TC: 4	RxQs/TC: 8 */
+		*tx = tc << 2; /* 0, 4,  8, 12, 16, 20, 24, 28 */
+		*rx = tc << 3; /* 0, 8, 16, 24, 32, 40, 48, 56 */
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		if (num_tcs > 4) {
+			/*
+			 * TCs    : TC0/1 TC2/3 TC4-7
+			 * TxQs/TC:    32    16     8
+			 * RxQs/TC:    16    16    16
+			 */
+			*rx = tc << 4;
+			if (tc < 3)
+				*tx = tc << 5;		/*   0,  32,  64 */
+			else if (tc < 5)
+				*tx = (tc + 2) << 4;	/*  80,  96 */
+			else
+				*tx = (tc + 8) << 3;	/* 104, 112, 120 */
+		} else {
+			/*
+			 * TCs    : TC0 TC1 TC2/3
+			 * TxQs/TC:  64  32    16
+			 * RxQs/TC:  32  32    32
+			 */
+			*rx = tc << 5;
+			if (tc < 2)
+				*tx = tc << 6;		/*  0,  64 */
+			else
+				*tx = (tc + 4) << 4;	/* 96, 112 */
+		}
+	default:
+		break;
+	}
+}
+
+/**
+ * ixgbe_cache_ring_dcb - Descriptor ring to register mapping for DCB
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for DCB to the assigned rings.
+ *
+ **/
+static bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter)
+{
+	struct net_device *dev = adapter->netdev;
+	unsigned int tx_idx, rx_idx;
+	int tc, offset, rss_i, i;
+	u8 num_tcs = netdev_get_num_tc(dev);
+
+	/* verify we have DCB queueing enabled before proceeding */
+	if (num_tcs <= 1)
+		return false;
+
+	rss_i = adapter->ring_feature[RING_F_RSS].indices;
+
+	for (tc = 0, offset = 0; tc < num_tcs; tc++, offset += rss_i) {
+		ixgbe_get_first_reg_idx(adapter, tc, &tx_idx, &rx_idx);
+		for (i = 0; i < rss_i; i++, tx_idx++, rx_idx++) {
+			adapter->tx_ring[offset + i]->reg_idx = tx_idx;
+			adapter->rx_ring[offset + i]->reg_idx = rx_idx;
+			adapter->tx_ring[offset + i]->dcb_tc = tc;
+			adapter->rx_ring[offset + i]->dcb_tc = tc;
+		}
+	}
+
+	return true;
+}
+
+#endif
+/**
+ * ixgbe_cache_ring_sriov - Descriptor ring to register mapping for sriov
+ * @adapter: board private structure to initialize
+ *
+ * SR-IOV doesn't use any descriptor rings but changes the default if
+ * no other mapping is used.
+ *
+ */
+static bool ixgbe_cache_ring_sriov(struct ixgbe_adapter *adapter)
+{
+#ifdef IXGBE_FCOE
+	struct ixgbe_ring_feature *fcoe = &adapter->ring_feature[RING_F_FCOE];
+#endif /* IXGBE_FCOE */
+	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
+	struct ixgbe_ring_feature *rss = &adapter->ring_feature[RING_F_RSS];
+	int i;
+	u16 reg_idx;
+
+	/* only proceed if VMDq is enabled */
+	if (!(adapter->flags & IXGBE_FLAG_VMDQ_ENABLED))
+		return false;
+
+	/* start at VMDq register offset for SR-IOV enabled setups */
+	reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask);
+	for (i = 0; i < adapter->num_rx_queues; i++, reg_idx++) {
+#ifdef IXGBE_FCOE
+		/* Allow first FCoE queue to be mapped as RSS */
+		if (fcoe->offset && (i > fcoe->offset))
+			break;
+#endif
+		/* If we are greater than indices move to next pool */
+		if ((reg_idx & ~vmdq->mask) >= rss->indices)
+			reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask);
+		adapter->rx_ring[i]->reg_idx = reg_idx;
+	}
+
+#ifdef IXGBE_FCOE
+	/* FCoE uses a linear block of queues so just assigning 1:1 */
+	for (; i < adapter->num_rx_queues; i++, reg_idx++)
+		adapter->rx_ring[i]->reg_idx = reg_idx;
+
+#endif
+	reg_idx = vmdq->offset * __ALIGN_MASK(1, ~vmdq->mask);
+	for (i = 0; i < adapter->num_tx_queues; i++, reg_idx++) {
+#ifdef IXGBE_FCOE
+		/* Allow first FCoE queue to be mapped as RSS */
+		if (fcoe->offset && (i > fcoe->offset))
+			break;
+#endif
+		/* If we are greater than indices move to next pool */
+		if ((reg_idx & rss->mask) >= rss->indices)
+			reg_idx = __ALIGN_MASK(reg_idx, ~vmdq->mask);
+		adapter->tx_ring[i]->reg_idx = reg_idx;
+	}
+
+#ifdef IXGBE_FCOE
+	/* FCoE uses a linear block of queues so just assigning 1:1 */
+	for (; i < adapter->num_tx_queues; i++, reg_idx++)
+		adapter->tx_ring[i]->reg_idx = reg_idx;
+
+#endif
+
+	return true;
+}
+
+/**
+ * ixgbe_cache_ring_rss - Descriptor ring to register mapping for RSS
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for RSS to the assigned rings.
+ *
+ **/
+static bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		adapter->rx_ring[i]->reg_idx = i;
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		adapter->tx_ring[i]->reg_idx = i;
+
+	return true;
+}
+
+/**
+ * ixgbe_cache_ring_register - Descriptor ring to register mapping
+ * @adapter: board private structure to initialize
+ *
+ * Once we know the feature-set enabled for the device, we'll cache
+ * the register offset the descriptor ring is assigned to.
+ *
+ * Note, the order the various feature calls is important.  It must start with
+ * the "most" features enabled at the same time, then trickle down to the
+ * least amount of features turned on at once.
+ **/
+static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
+{
+	/* start with default case */
+	adapter->rx_ring[0]->reg_idx = 0;
+	adapter->tx_ring[0]->reg_idx = 0;
+
+#ifdef CONFIG_IXGBE_DCB
+	if (ixgbe_cache_ring_dcb_sriov(adapter))
+		return;
+
+	if (ixgbe_cache_ring_dcb(adapter))
+		return;
+
+#endif
+	if (ixgbe_cache_ring_sriov(adapter))
+		return;
+
+	ixgbe_cache_ring_rss(adapter);
+}
+
+#define IXGBE_RSS_16Q_MASK	0xF
+#define IXGBE_RSS_8Q_MASK	0x7
+#define IXGBE_RSS_4Q_MASK	0x3
+#define IXGBE_RSS_2Q_MASK	0x1
+#define IXGBE_RSS_DISABLED_MASK	0x0
+
+#ifdef CONFIG_IXGBE_DCB
+/**
+ * ixgbe_set_dcb_sriov_queues: Allocate queues for SR-IOV devices w/ DCB
+ * @adapter: board private structure to initialize
+ *
+ * When SR-IOV (Single Root IO Virtualiztion) is enabled, allocate queues
+ * and VM pools where appropriate.  Also assign queues based on DCB
+ * priorities and map accordingly..
+ *
+ **/
+static bool ixgbe_set_dcb_sriov_queues(struct ixgbe_adapter *adapter)
+{
+	int i;
+	u16 vmdq_i = adapter->ring_feature[RING_F_VMDQ].limit;
+	u16 vmdq_m = 0;
+#ifdef IXGBE_FCOE
+	u16 fcoe_i = 0;
+#endif
+	u8 tcs = netdev_get_num_tc(adapter->netdev);
+
+	/* verify we have DCB queueing enabled before proceeding */
+	if (tcs <= 1)
+		return false;
+
+	/* verify we have VMDq enabled before proceeding */
+	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+		return false;
+
+	/* Add starting offset to total pool count */
+	vmdq_i += adapter->ring_feature[RING_F_VMDQ].offset;
+
+	/* 16 pools w/ 8 TC per pool */
+	if (tcs > 4) {
+		vmdq_i = min_t(u16, vmdq_i, 16);
+		vmdq_m = IXGBE_82599_VMDQ_8Q_MASK;
+	/* 32 pools w/ 4 TC per pool */
+	} else {
+		vmdq_i = min_t(u16, vmdq_i, 32);
+		vmdq_m = IXGBE_82599_VMDQ_4Q_MASK;
+	}
+
+#ifdef IXGBE_FCOE
+	/* queues in the remaining pools are available for FCoE */
+	fcoe_i = (128 / __ALIGN_MASK(1, ~vmdq_m)) - vmdq_i;
+
+#endif
+	/* remove the starting offset from the pool count */
+	vmdq_i -= adapter->ring_feature[RING_F_VMDQ].offset;
+
+	/* save features for later use */
+	adapter->ring_feature[RING_F_VMDQ].indices = vmdq_i;
+	adapter->ring_feature[RING_F_VMDQ].mask = vmdq_m;
+
+	/*
+	 * We do not support DCB, VMDq, and RSS all simultaneously
+	 * so we will disable RSS since it is the lowest priority
+	 */
+	adapter->ring_feature[RING_F_RSS].indices = 1;
+	adapter->ring_feature[RING_F_RSS].mask = IXGBE_RSS_DISABLED_MASK;
+
+	/* disable ATR as it is not supported when VMDq is enabled */
+	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
+	adapter->num_rx_pools = vmdq_i;
+	adapter->num_rx_queues_per_pool = tcs;
+
+	adapter->num_tx_queues = vmdq_i * tcs;
+	adapter->num_rx_queues = vmdq_i * tcs;
+
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+		struct ixgbe_ring_feature *fcoe;
+
+		fcoe = &adapter->ring_feature[RING_F_FCOE];
+
+		/* limit ourselves based on feature limits */
+		fcoe_i = min_t(u16, fcoe_i, fcoe->limit);
+
+		if (fcoe_i) {
+			/* alloc queues for FCoE separately */
+			fcoe->indices = fcoe_i;
+			fcoe->offset = vmdq_i * tcs;
+
+			/* add queues to adapter */
+			adapter->num_tx_queues += fcoe_i;
+			adapter->num_rx_queues += fcoe_i;
+		} else if (tcs > 1) {
+			/* use queue belonging to FcoE TC */
+			fcoe->indices = 1;
+			fcoe->offset = ixgbe_fcoe_get_tc(adapter);
+		} else {
+			adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+
+			fcoe->indices = 0;
+			fcoe->offset = 0;
+		}
+	}
+
+#endif /* IXGBE_FCOE */
+	/* configure TC to queue mapping */
+	for (i = 0; i < tcs; i++)
+		netdev_set_tc_queue(adapter->netdev, i, 1, i);
+
+	return true;
+}
+
+static bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
+{
+	struct net_device *dev = adapter->netdev;
+	struct ixgbe_ring_feature *f;
+	int rss_i, rss_m, i;
+	int tcs;
+
+	/* Map queue offset and counts onto allocated tx queues */
+	tcs = netdev_get_num_tc(dev);
+
+	/* verify we have DCB queueing enabled before proceeding */
+	if (tcs <= 1)
+		return false;
+
+	/* determine the upper limit for our current DCB mode */
+	rss_i = dev->num_tx_queues / tcs;
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		/* 8 TC w/ 4 queues per TC */
+		rss_i = min_t(u16, rss_i, 4);
+		rss_m = IXGBE_RSS_4Q_MASK;
+	} else if (tcs > 4) {
+		/* 8 TC w/ 8 queues per TC */
+		rss_i = min_t(u16, rss_i, 8);
+		rss_m = IXGBE_RSS_8Q_MASK;
+	} else {
+		/* 4 TC w/ 16 queues per TC */
+		rss_i = min_t(u16, rss_i, 16);
+		rss_m = IXGBE_RSS_16Q_MASK;
+	}
+
+	/* set RSS mask and indices */
+	f = &adapter->ring_feature[RING_F_RSS];
+	rss_i = min_t(int, rss_i, f->limit);
+	f->indices = rss_i;
+	f->mask = rss_m;
+
+	/* disable ATR as it is not supported when multiple TCs are enabled */
+	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
+#ifdef IXGBE_FCOE
+	/* FCoE enabled queues require special configuration indexed
+	 * by feature specific indices and offset. Here we map FCoE
+	 * indices onto the DCB queue pairs allowing FCoE to own
+	 * configuration later.
+	 */
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+		u8 tc = ixgbe_fcoe_get_tc(adapter);
+
+		f = &adapter->ring_feature[RING_F_FCOE];
+		f->indices = min_t(u16, rss_i, f->limit);
+		f->offset = rss_i * tc;
+	}
+
+#endif /* IXGBE_FCOE */
+	for (i = 0; i < tcs; i++)
+		netdev_set_tc_queue(dev, i, rss_i, rss_i * i);
+
+	adapter->num_tx_queues = rss_i * tcs;
+	adapter->num_rx_queues = rss_i * tcs;
+
+	return true;
+}
+
+#endif
+/**
+ * ixgbe_set_sriov_queues - Allocate queues for SR-IOV devices
+ * @adapter: board private structure to initialize
+ *
+ * When SR-IOV (Single Root IO Virtualiztion) is enabled, allocate queues
+ * and VM pools where appropriate.  If RSS is available, then also try and
+ * enable RSS and map accordingly.
+ *
+ **/
+static bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter)
+{
+	u16 vmdq_i = adapter->ring_feature[RING_F_VMDQ].limit;
+	u16 vmdq_m = 0;
+	u16 rss_i = adapter->ring_feature[RING_F_RSS].limit;
+	u16 rss_m = IXGBE_RSS_DISABLED_MASK;
+#ifdef IXGBE_FCOE
+	u16 fcoe_i = 0;
+#endif
+	bool pools = (find_first_zero_bit(&adapter->fwd_bitmask, 32) > 1);
+
+	/* only proceed if SR-IOV is enabled */
+	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+		return false;
+
+	/* Add starting offset to total pool count */
+	vmdq_i += adapter->ring_feature[RING_F_VMDQ].offset;
+
+	/* double check we are limited to maximum pools */
+	vmdq_i = min_t(u16, IXGBE_MAX_VMDQ_INDICES, vmdq_i);
+
+	/* 64 pool mode with 2 queues per pool */
+	if ((vmdq_i > 32) || (rss_i < 4) || (vmdq_i > 16 && pools)) {
+		vmdq_m = IXGBE_82599_VMDQ_2Q_MASK;
+		rss_m = IXGBE_RSS_2Q_MASK;
+		rss_i = min_t(u16, rss_i, 2);
+	/* 32 pool mode with 4 queues per pool */
+	} else {
+		vmdq_m = IXGBE_82599_VMDQ_4Q_MASK;
+		rss_m = IXGBE_RSS_4Q_MASK;
+		rss_i = 4;
+	}
+
+#ifdef IXGBE_FCOE
+	/* queues in the remaining pools are available for FCoE */
+	fcoe_i = 128 - (vmdq_i * __ALIGN_MASK(1, ~vmdq_m));
+
+#endif
+	/* remove the starting offset from the pool count */
+	vmdq_i -= adapter->ring_feature[RING_F_VMDQ].offset;
+
+	/* save features for later use */
+	adapter->ring_feature[RING_F_VMDQ].indices = vmdq_i;
+	adapter->ring_feature[RING_F_VMDQ].mask = vmdq_m;
+
+	/* limit RSS based on user input and save for later use */
+	adapter->ring_feature[RING_F_RSS].indices = rss_i;
+	adapter->ring_feature[RING_F_RSS].mask = rss_m;
+
+	adapter->num_rx_pools = vmdq_i;
+	adapter->num_rx_queues_per_pool = rss_i;
+
+	adapter->num_rx_queues = vmdq_i * rss_i;
+	adapter->num_tx_queues = vmdq_i * rss_i;
+
+	/* disable ATR as it is not supported when VMDq is enabled */
+	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
+#ifdef IXGBE_FCOE
+	/*
+	 * FCoE can use rings from adjacent buffers to allow RSS
+	 * like behavior.  To account for this we need to add the
+	 * FCoE indices to the total ring count.
+	 */
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+		struct ixgbe_ring_feature *fcoe;
+
+		fcoe = &adapter->ring_feature[RING_F_FCOE];
+
+		/* limit ourselves based on feature limits */
+		fcoe_i = min_t(u16, fcoe_i, fcoe->limit);
+
+		if (vmdq_i > 1 && fcoe_i) {
+			/* alloc queues for FCoE separately */
+			fcoe->indices = fcoe_i;
+			fcoe->offset = vmdq_i * rss_i;
+		} else {
+			/* merge FCoE queues with RSS queues */
+			fcoe_i = min_t(u16, fcoe_i + rss_i, num_online_cpus());
+
+			/* limit indices to rss_i if MSI-X is disabled */
+			if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
+				fcoe_i = rss_i;
+
+			/* attempt to reserve some queues for just FCoE */
+			fcoe->indices = min_t(u16, fcoe_i, fcoe->limit);
+			fcoe->offset = fcoe_i - fcoe->indices;
+
+			fcoe_i -= rss_i;
+		}
+
+		/* add queues to adapter */
+		adapter->num_tx_queues += fcoe_i;
+		adapter->num_rx_queues += fcoe_i;
+	}
+
+#endif
+	return true;
+}
+
+/**
+ * ixgbe_set_rss_queues - Allocate queues for RSS
+ * @adapter: board private structure to initialize
+ *
+ * This is our "base" multiqueue mode.  RSS (Receive Side Scaling) will try
+ * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU.
+ *
+ **/
+static bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_ring_feature *f;
+	u16 rss_i;
+
+	/* set mask for 16 queue limit of RSS */
+	f = &adapter->ring_feature[RING_F_RSS];
+	rss_i = f->limit;
+
+	f->indices = rss_i;
+	f->mask = IXGBE_RSS_16Q_MASK;
+
+	/* disable ATR by default, it will be configured below */
+	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
+	/*
+	 * Use Flow Director in addition to RSS to ensure the best
+	 * distribution of flows across cores, even when an FDIR flow
+	 * isn't matched.
+	 */
+	if (rss_i > 1 && adapter->atr_sample_rate) {
+		f = &adapter->ring_feature[RING_F_FDIR];
+
+		rss_i = f->indices = f->limit;
+
+		if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+			adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+	}
+
+#ifdef IXGBE_FCOE
+	/*
+	 * FCoE can exist on the same rings as standard network traffic
+	 * however it is preferred to avoid that if possible.  In order
+	 * to get the best performance we allocate as many FCoE queues
+	 * as we can and we place them at the end of the ring array to
+	 * avoid sharing queues with standard RSS on systems with 24 or
+	 * more CPUs.
+	 */
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+		struct net_device *dev = adapter->netdev;
+		u16 fcoe_i;
+
+		f = &adapter->ring_feature[RING_F_FCOE];
+
+		/* merge FCoE queues with RSS queues */
+		fcoe_i = min_t(u16, f->limit + rss_i, num_online_cpus());
+		fcoe_i = min_t(u16, fcoe_i, dev->num_tx_queues);
+
+		/* limit indices to rss_i if MSI-X is disabled */
+		if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
+			fcoe_i = rss_i;
+
+		/* attempt to reserve some queues for just FCoE */
+		f->indices = min_t(u16, fcoe_i, f->limit);
+		f->offset = fcoe_i - f->indices;
+		rss_i = max_t(u16, fcoe_i, rss_i);
+	}
+
+#endif /* IXGBE_FCOE */
+	adapter->num_rx_queues = rss_i;
+	adapter->num_tx_queues = rss_i;
+
+	return true;
+}
+
+/**
+ * ixgbe_set_num_queues - Allocate queues for device, feature dependent
+ * @adapter: board private structure to initialize
+ *
+ * This is the top level queue allocation routine.  The order here is very
+ * important, starting with the "most" number of features turned on at once,
+ * and ending with the smallest set of features.  This way large combinations
+ * can be allocated if they're turned on, and smaller combinations are the
+ * fallthrough conditions.
+ *
+ **/
+static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
+{
+	/* Start with base case */
+	adapter->num_rx_queues = 1;
+	adapter->num_tx_queues = 1;
+	adapter->num_rx_pools = adapter->num_rx_queues;
+	adapter->num_rx_queues_per_pool = 1;
+
+#ifdef CONFIG_IXGBE_DCB
+	if (ixgbe_set_dcb_sriov_queues(adapter))
+		return;
+
+	if (ixgbe_set_dcb_queues(adapter))
+		return;
+
+#endif
+	if (ixgbe_set_sriov_queues(adapter))
+		return;
+
+	ixgbe_set_rss_queues(adapter);
+}
+
+/**
+ * ixgbe_acquire_msix_vectors - acquire MSI-X vectors
+ * @adapter: board private structure
+ *
+ * Attempts to acquire a suitable range of MSI-X vector interrupts. Will
+ * return a negative error code if unable to acquire MSI-X vectors for any
+ * reason.
+ */
+static int ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i, vectors, vector_threshold;
+
+	/* We start by asking for one vector per queue pair */
+	vectors = max(adapter->num_rx_queues, adapter->num_tx_queues);
+
+	/* It is easy to be greedy for MSI-X vectors. However, it really
+	 * doesn't do much good if we have a lot more vectors than CPUs. We'll
+	 * be somewhat conservative and only ask for (roughly) the same number
+	 * of vectors as there are CPUs.
+	 */
+	vectors = min_t(int, vectors, num_online_cpus());
+
+	/* Some vectors are necessary for non-queue interrupts */
+	vectors += NON_Q_VECTORS;
+
+	/* Hardware can only support a maximum of hw.mac->max_msix_vectors.
+	 * With features such as RSS and VMDq, we can easily surpass the
+	 * number of Rx and Tx descriptor queues supported by our device.
+	 * Thus, we cap the maximum in the rare cases where the CPU count also
+	 * exceeds our vector limit
+	 */
+	vectors = min_t(int, vectors, hw->mac.max_msix_vectors);
+
+	/* We want a minimum of two MSI-X vectors for (1) a TxQ[0] + RxQ[0]
+	 * handler, and (2) an Other (Link Status Change, etc.) handler.
+	 */
+	vector_threshold = MIN_MSIX_COUNT;
+
+	adapter->msix_entries = kcalloc(vectors,
+					sizeof(struct msix_entry),
+					GFP_KERNEL);
+	if (!adapter->msix_entries)
+		return -ENOMEM;
+
+	for (i = 0; i < vectors; i++)
+		adapter->msix_entries[i].entry = i;
+
+	vectors = pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+					vector_threshold, vectors);
+
+	if (vectors < 0) {
+		/* A negative count of allocated vectors indicates an error in
+		 * acquiring within the specified range of MSI-X vectors
+		 */
+		e_dev_warn("Failed to allocate MSI-X interrupts. Err: %d\n",
+			   vectors);
+
+		adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
+		kfree(adapter->msix_entries);
+		adapter->msix_entries = NULL;
+
+		return vectors;
+	}
+
+	/* we successfully allocated some number of vectors within our
+	 * requested range.
+	 */
+	adapter->flags |= IXGBE_FLAG_MSIX_ENABLED;
+
+	/* Adjust for only the vectors we'll use, which is minimum
+	 * of max_q_vectors, or the number of vectors we were allocated.
+	 */
+	vectors -= NON_Q_VECTORS;
+	adapter->num_q_vectors = min_t(int, vectors, adapter->max_q_vectors);
+
+	return 0;
+}
+
+static void ixgbe_add_ring(struct ixgbe_ring *ring,
+			   struct ixgbe_ring_container *head)
+{
+	ring->next = head->ring;
+	head->ring = ring;
+	head->count++;
+}
+
+/**
+ * ixgbe_alloc_q_vector - Allocate memory for a single interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_count: q_vectors allocated on adapter, used for ring interleaving
+ * @v_idx: index of vector in adapter struct
+ * @txr_count: total number of Tx rings to allocate
+ * @txr_idx: index of first Tx ring to allocate
+ * @rxr_count: total number of Rx rings to allocate
+ * @rxr_idx: index of first Rx ring to allocate
+ *
+ * We allocate one q_vector.  If allocation fails we return -ENOMEM.
+ **/
+static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter,
+				int v_count, int v_idx,
+				int txr_count, int txr_idx,
+				int rxr_count, int rxr_idx)
+{
+	struct ixgbe_q_vector *q_vector;
+	struct ixgbe_ring *ring;
+	int node = NUMA_NO_NODE;
+	int cpu = -1;
+	int ring_count, size;
+	u8 tcs = netdev_get_num_tc(adapter->netdev);
+
+	ring_count = txr_count + rxr_count;
+	size = sizeof(struct ixgbe_q_vector) +
+	       (sizeof(struct ixgbe_ring) * ring_count);
+
+	/* customize cpu for Flow Director mapping */
+	if ((tcs <= 1) && !(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) {
+		u16 rss_i = adapter->ring_feature[RING_F_RSS].indices;
+		if (rss_i > 1 && adapter->atr_sample_rate) {
+			if (cpu_online(v_idx)) {
+				cpu = v_idx;
+				node = cpu_to_node(cpu);
+			}
+		}
+	}
+
+	/* allocate q_vector and rings */
+	q_vector = kzalloc_node(size, GFP_KERNEL, node);
+	if (!q_vector)
+		q_vector = kzalloc(size, GFP_KERNEL);
+	if (!q_vector)
+		return -ENOMEM;
+
+	/* setup affinity mask and node */
+	if (cpu != -1)
+		cpumask_set_cpu(cpu, &q_vector->affinity_mask);
+	q_vector->numa_node = node;
+
+#ifdef CONFIG_IXGBE_DCA
+	/* initialize CPU for DCA */
+	q_vector->cpu = -1;
+
+#endif
+	/* initialize NAPI */
+	netif_napi_add(adapter->netdev, &q_vector->napi,
+		       ixgbe_poll, 64);
+	napi_hash_add(&q_vector->napi);
+
+#ifdef CONFIG_NET_RX_BUSY_POLL
+	/* initialize busy poll */
+	atomic_set(&q_vector->state, IXGBE_QV_STATE_DISABLE);
+
+#endif
+	/* tie q_vector and adapter together */
+	adapter->q_vector[v_idx] = q_vector;
+	q_vector->adapter = adapter;
+	q_vector->v_idx = v_idx;
+
+	/* initialize work limits */
+	q_vector->tx.work_limit = adapter->tx_work_limit;
+
+	/* initialize pointer to rings */
+	ring = q_vector->ring;
+
+	/* intialize ITR */
+	if (txr_count && !rxr_count) {
+		/* tx only vector */
+		if (adapter->tx_itr_setting == 1)
+			q_vector->itr = IXGBE_10K_ITR;
+		else
+			q_vector->itr = adapter->tx_itr_setting;
+	} else {
+		/* rx or rx/tx vector */
+		if (adapter->rx_itr_setting == 1)
+			q_vector->itr = IXGBE_20K_ITR;
+		else
+			q_vector->itr = adapter->rx_itr_setting;
+	}
+
+	while (txr_count) {
+		/* assign generic ring traits */
+		ring->dev = &adapter->pdev->dev;
+		ring->netdev = adapter->netdev;
+
+		/* configure backlink on ring */
+		ring->q_vector = q_vector;
+
+		/* update q_vector Tx values */
+		ixgbe_add_ring(ring, &q_vector->tx);
+
+		/* apply Tx specific ring traits */
+		ring->count = adapter->tx_ring_count;
+		if (adapter->num_rx_pools > 1)
+			ring->queue_index =
+				txr_idx % adapter->num_rx_queues_per_pool;
+		else
+			ring->queue_index = txr_idx;
+
+		/* assign ring to adapter */
+		adapter->tx_ring[txr_idx] = ring;
+
+		/* update count and index */
+		txr_count--;
+		txr_idx += v_count;
+
+		/* push pointer to next ring */
+		ring++;
+	}
+
+	while (rxr_count) {
+		/* assign generic ring traits */
+		ring->dev = &adapter->pdev->dev;
+		ring->netdev = adapter->netdev;
+
+		/* configure backlink on ring */
+		ring->q_vector = q_vector;
+
+		/* update q_vector Rx values */
+		ixgbe_add_ring(ring, &q_vector->rx);
+
+		/*
+		 * 82599 errata, UDP frames with a 0 checksum
+		 * can be marked as checksum errors.
+		 */
+		if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+			set_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR, &ring->state);
+
+#ifdef IXGBE_FCOE
+		if (adapter->netdev->features & NETIF_F_FCOE_MTU) {
+			struct ixgbe_ring_feature *f;
+			f = &adapter->ring_feature[RING_F_FCOE];
+			if ((rxr_idx >= f->offset) &&
+			    (rxr_idx < f->offset + f->indices))
+				set_bit(__IXGBE_RX_FCOE, &ring->state);
+		}
+
+#endif /* IXGBE_FCOE */
+		/* apply Rx specific ring traits */
+		ring->count = adapter->rx_ring_count;
+		if (adapter->num_rx_pools > 1)
+			ring->queue_index =
+				rxr_idx % adapter->num_rx_queues_per_pool;
+		else
+			ring->queue_index = rxr_idx;
+
+		/* assign ring to adapter */
+		adapter->rx_ring[rxr_idx] = ring;
+
+		/* update count and index */
+		rxr_count--;
+		rxr_idx += v_count;
+
+		/* push pointer to next ring */
+		ring++;
+	}
+
+	return 0;
+}
+
+/**
+ * ixgbe_free_q_vector - Free memory allocated for specific interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_idx: Index of vector to be freed
+ *
+ * This function frees the memory allocated to the q_vector.  In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void ixgbe_free_q_vector(struct ixgbe_adapter *adapter, int v_idx)
+{
+	struct ixgbe_q_vector *q_vector = adapter->q_vector[v_idx];
+	struct ixgbe_ring *ring;
+
+	ixgbe_for_each_ring(ring, q_vector->tx)
+		adapter->tx_ring[ring->queue_index] = NULL;
+
+	ixgbe_for_each_ring(ring, q_vector->rx)
+		adapter->rx_ring[ring->queue_index] = NULL;
+
+	adapter->q_vector[v_idx] = NULL;
+	napi_hash_del(&q_vector->napi);
+	netif_napi_del(&q_vector->napi);
+
+	/*
+	 * ixgbe_get_stats64() might access the rings on this vector,
+	 * we must wait a grace period before freeing it.
+	 */
+	kfree_rcu(q_vector, rcu);
+}
+
+/**
+ * ixgbe_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt.  If allocation fails we
+ * return -ENOMEM.
+ **/
+static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
+{
+	int q_vectors = adapter->num_q_vectors;
+	int rxr_remaining = adapter->num_rx_queues;
+	int txr_remaining = adapter->num_tx_queues;
+	int rxr_idx = 0, txr_idx = 0, v_idx = 0;
+	int err;
+
+	/* only one q_vector if MSI-X is disabled. */
+	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
+		q_vectors = 1;
+
+	if (q_vectors >= (rxr_remaining + txr_remaining)) {
+		for (; rxr_remaining; v_idx++) {
+			err = ixgbe_alloc_q_vector(adapter, q_vectors, v_idx,
+						   0, 0, 1, rxr_idx);
+
+			if (err)
+				goto err_out;
+
+			/* update counts and index */
+			rxr_remaining--;
+			rxr_idx++;
+		}
+	}
+
+	for (; v_idx < q_vectors; v_idx++) {
+		int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx);
+		int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx);
+		err = ixgbe_alloc_q_vector(adapter, q_vectors, v_idx,
+					   tqpv, txr_idx,
+					   rqpv, rxr_idx);
+
+		if (err)
+			goto err_out;
+
+		/* update counts and index */
+		rxr_remaining -= rqpv;
+		txr_remaining -= tqpv;
+		rxr_idx++;
+		txr_idx++;
+	}
+
+	return 0;
+
+err_out:
+	adapter->num_tx_queues = 0;
+	adapter->num_rx_queues = 0;
+	adapter->num_q_vectors = 0;
+
+	while (v_idx--)
+		ixgbe_free_q_vector(adapter, v_idx);
+
+	return -ENOMEM;
+}
+
+/**
+ * ixgbe_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors.  In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void ixgbe_free_q_vectors(struct ixgbe_adapter *adapter)
+{
+	int v_idx = adapter->num_q_vectors;
+
+	adapter->num_tx_queues = 0;
+	adapter->num_rx_queues = 0;
+	adapter->num_q_vectors = 0;
+
+	while (v_idx--)
+		ixgbe_free_q_vector(adapter, v_idx);
+}
+
+static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
+{
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+		adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
+		pci_disable_msix(adapter->pdev);
+		kfree(adapter->msix_entries);
+		adapter->msix_entries = NULL;
+	} else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
+		adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED;
+		pci_disable_msi(adapter->pdev);
+	}
+}
+
+/**
+ * ixgbe_set_interrupt_capability - set MSI-X or MSI if supported
+ * @adapter: board private structure to initialize
+ *
+ * Attempt to configure the interrupts using the best available
+ * capabilities of the hardware and the kernel.
+ **/
+static void ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
+{
+	int err;
+
+	/* We will try to get MSI-X interrupts first */
+	if (!ixgbe_acquire_msix_vectors(adapter))
+		return;
+
+	/* At this point, we do not have MSI-X capabilities. We need to
+	 * reconfigure or disable various features which require MSI-X
+	 * capability.
+	 */
+
+	/* Disable DCB unless we only have a single traffic class */
+	if (netdev_get_num_tc(adapter->netdev) > 1) {
+		e_dev_warn("Number of DCB TCs exceeds number of available queues. Disabling DCB support.\n");
+		netdev_reset_tc(adapter->netdev);
+
+		if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+			adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
+
+		adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
+		adapter->temp_dcb_cfg.pfc_mode_enable = false;
+		adapter->dcb_cfg.pfc_mode_enable = false;
+	}
+
+	adapter->dcb_cfg.num_tcs.pg_tcs = 1;
+	adapter->dcb_cfg.num_tcs.pfc_tcs = 1;
+
+	/* Disable SR-IOV support */
+	e_dev_warn("Disabling SR-IOV support\n");
+	ixgbe_disable_sriov(adapter);
+
+	/* Disable RSS */
+	e_dev_warn("Disabling RSS support\n");
+	adapter->ring_feature[RING_F_RSS].limit = 1;
+
+	/* recalculate number of queues now that many features have been
+	 * changed or disabled.
+	 */
+	ixgbe_set_num_queues(adapter);
+	adapter->num_q_vectors = 1;
+
+	err = pci_enable_msi(adapter->pdev);
+	if (err)
+		e_dev_warn("Failed to allocate MSI interrupt, falling back to legacy. Error: %d\n",
+			   err);
+	else
+		adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
+}
+
+/**
+ * ixgbe_init_interrupt_scheme - Determine proper interrupt scheme
+ * @adapter: board private structure to initialize
+ *
+ * We determine which interrupt scheme to use based on...
+ * - Kernel support (MSI, MSI-X)
+ *   - which can be user-defined (via MODULE_PARAM)
+ * - Hardware queue count (num_*_queues)
+ *   - defined by miscellaneous hardware support/features (RSS, etc.)
+ **/
+int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
+{
+	int err;
+
+	/* Number of supported queues */
+	ixgbe_set_num_queues(adapter);
+
+	/* Set interrupt mode */
+	ixgbe_set_interrupt_capability(adapter);
+
+	err = ixgbe_alloc_q_vectors(adapter);
+	if (err) {
+		e_dev_err("Unable to allocate memory for queue vectors\n");
+		goto err_alloc_q_vectors;
+	}
+
+	ixgbe_cache_ring_register(adapter);
+
+	e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n",
+		   (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
+		   adapter->num_rx_queues, adapter->num_tx_queues);
+
+	set_bit(__IXGBE_DOWN, &adapter->state);
+
+	return 0;
+
+err_alloc_q_vectors:
+	ixgbe_reset_interrupt_capability(adapter);
+	return err;
+}
+
+/**
+ * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
+ * @adapter: board private structure to clear interrupt scheme on
+ *
+ * We go through and clear interrupt specific resources and reset the structure
+ * to pre-load conditions
+ **/
+void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter)
+{
+	adapter->num_tx_queues = 0;
+	adapter->num_rx_queues = 0;
+
+	ixgbe_free_q_vectors(adapter);
+	ixgbe_reset_interrupt_capability(adapter);
+}
+
+void ixgbe_tx_ctxtdesc(struct ixgbe_ring *tx_ring, u32 vlan_macip_lens,
+		       u32 fcoe_sof_eof, u32 type_tucmd, u32 mss_l4len_idx)
+{
+	struct ixgbe_adv_tx_context_desc *context_desc;
+	u16 i = tx_ring->next_to_use;
+
+	context_desc = IXGBE_TX_CTXTDESC(tx_ring, i);
+
+	i++;
+	tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
+
+	/* set bits to identify this as an advanced context descriptor */
+	type_tucmd |= IXGBE_TXD_CMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT;
+
+	context_desc->vlan_macip_lens	= cpu_to_le32(vlan_macip_lens);
+	context_desc->seqnum_seed	= cpu_to_le32(fcoe_sof_eof);
+	context_desc->type_tucmd_mlhl	= cpu_to_le32(type_tucmd);
+	context_desc->mss_l4len_idx	= cpu_to_le32(mss_l4len_idx);
+}
+
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
new file mode 100644
index 000000000..5be12a00e
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -0,0 +1,9123 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/sctp.h>
+#include <linux/pkt_sched.h>
+#include <linux/ipv6.h>
+#include <linux/slab.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if.h>
+#include <linux/if_vlan.h>
+#include <linux/if_macvlan.h>
+#include <linux/if_bridge.h>
+#include <linux/prefetch.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <net/vxlan.h>
+
+#ifdef CONFIG_OF
+#include <linux/of_net.h>
+#endif
+
+#ifdef CONFIG_SPARC
+#include <asm/idprom.h>
+#include <asm/prom.h>
+#endif
+
+#include "ixgbe.h"
+#include "ixgbe_common.h"
+#include "ixgbe_dcb_82599.h"
+#include "ixgbe_sriov.h"
+
+char ixgbe_driver_name[] = "ixgbe";
+static const char ixgbe_driver_string[] =
+			      "Intel(R) 10 Gigabit PCI Express Network Driver";
+#ifdef IXGBE_FCOE
+char ixgbe_default_device_descr[] =
+			      "Intel(R) 10 Gigabit Network Connection";
+#else
+static char ixgbe_default_device_descr[] =
+			      "Intel(R) 10 Gigabit Network Connection";
+#endif
+#define DRV_VERSION "4.0.1-k"
+const char ixgbe_driver_version[] = DRV_VERSION;
+static const char ixgbe_copyright[] =
+				"Copyright (c) 1999-2014 Intel Corporation.";
+
+static const struct ixgbe_info *ixgbe_info_tbl[] = {
+	[board_82598]		= &ixgbe_82598_info,
+	[board_82599]		= &ixgbe_82599_info,
+	[board_X540]		= &ixgbe_X540_info,
+	[board_X550]		= &ixgbe_X550_info,
+	[board_X550EM_x]	= &ixgbe_X550EM_x_info,
+};
+
+/* ixgbe_pci_tbl - PCI Device ID Table
+ *
+ * Wildcard entries (PCI_ANY_ID) should come last
+ * Last entry must be all 0s
+ *
+ * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+ *   Class, Class Mask, private data (not used) }
+ */
+static const struct pci_device_id ixgbe_pci_tbl[] = {
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT2), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX), board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KR), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_EM), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_BACKPLANE_FCOE), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_FCOE), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T), board_X540 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_QSFP_SF_QP), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T1), board_X540 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550T), board_X550},
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KX4), board_X550EM_x},
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KR), board_X550EM_x},
+	/* required last entry */
+	{0, }
+};
+MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl);
+
+#ifdef CONFIG_IXGBE_DCA
+static int ixgbe_notify_dca(struct notifier_block *, unsigned long event,
+			    void *p);
+static struct notifier_block dca_notifier = {
+	.notifier_call = ixgbe_notify_dca,
+	.next          = NULL,
+	.priority      = 0
+};
+#endif
+
+#ifdef CONFIG_PCI_IOV
+static unsigned int max_vfs;
+module_param(max_vfs, uint, 0);
+MODULE_PARM_DESC(max_vfs,
+		 "Maximum number of virtual functions to allocate per physical function - default is zero and maximum value is 63. (Deprecated)");
+#endif /* CONFIG_PCI_IOV */
+
+static unsigned int allow_unsupported_sfp;
+module_param(allow_unsupported_sfp, uint, 0);
+MODULE_PARM_DESC(allow_unsupported_sfp,
+		 "Allow unsupported and untested SFP+ modules on 82599-based adapters");
+
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static bool ixgbe_check_cfg_remove(struct ixgbe_hw *hw, struct pci_dev *pdev);
+
+static int ixgbe_read_pci_cfg_word_parent(struct ixgbe_adapter *adapter,
+					  u32 reg, u16 *value)
+{
+	struct pci_dev *parent_dev;
+	struct pci_bus *parent_bus;
+
+	parent_bus = adapter->pdev->bus->parent;
+	if (!parent_bus)
+		return -1;
+
+	parent_dev = parent_bus->self;
+	if (!parent_dev)
+		return -1;
+
+	if (!pci_is_pcie(parent_dev))
+		return -1;
+
+	pcie_capability_read_word(parent_dev, reg, value);
+	if (*value == IXGBE_FAILED_READ_CFG_WORD &&
+	    ixgbe_check_cfg_remove(&adapter->hw, parent_dev))
+		return -1;
+	return 0;
+}
+
+static s32 ixgbe_get_parent_bus_info(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 link_status = 0;
+	int err;
+
+	hw->bus.type = ixgbe_bus_type_pci_express;
+
+	/* Get the negotiated link width and speed from PCI config space of the
+	 * parent, as this device is behind a switch
+	 */
+	err = ixgbe_read_pci_cfg_word_parent(adapter, 18, &link_status);
+
+	/* assume caller will handle error case */
+	if (err)
+		return err;
+
+	hw->bus.width = ixgbe_convert_bus_width(link_status);
+	hw->bus.speed = ixgbe_convert_bus_speed(link_status);
+
+	return 0;
+}
+
+/**
+ * ixgbe_check_from_parent - Determine whether PCIe info should come from parent
+ * @hw: hw specific details
+ *
+ * This function is used by probe to determine whether a device's PCI-Express
+ * bandwidth details should be gathered from the parent bus instead of from the
+ * device. Used to ensure that various locations all have the correct device ID
+ * checks.
+ */
+static inline bool ixgbe_pcie_from_parent(struct ixgbe_hw *hw)
+{
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82599_SFP_SF_QP:
+	case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter,
+				     int expected_gts)
+{
+	int max_gts = 0;
+	enum pci_bus_speed speed = PCI_SPEED_UNKNOWN;
+	enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
+	struct pci_dev *pdev;
+
+	/* determine whether to use the the parent device
+	 */
+	if (ixgbe_pcie_from_parent(&adapter->hw))
+		pdev = adapter->pdev->bus->parent->self;
+	else
+		pdev = adapter->pdev;
+
+	if (pcie_get_minimum_link(pdev, &speed, &width) ||
+	    speed == PCI_SPEED_UNKNOWN || width == PCIE_LNK_WIDTH_UNKNOWN) {
+		e_dev_warn("Unable to determine PCI Express bandwidth.\n");
+		return;
+	}
+
+	switch (speed) {
+	case PCIE_SPEED_2_5GT:
+		/* 8b/10b encoding reduces max throughput by 20% */
+		max_gts = 2 * width;
+		break;
+	case PCIE_SPEED_5_0GT:
+		/* 8b/10b encoding reduces max throughput by 20% */
+		max_gts = 4 * width;
+		break;
+	case PCIE_SPEED_8_0GT:
+		/* 128b/130b encoding reduces throughput by less than 2% */
+		max_gts = 8 * width;
+		break;
+	default:
+		e_dev_warn("Unable to determine PCI Express bandwidth.\n");
+		return;
+	}
+
+	e_dev_info("PCI Express bandwidth of %dGT/s available\n",
+		   max_gts);
+	e_dev_info("(Speed:%s, Width: x%d, Encoding Loss:%s)\n",
+		   (speed == PCIE_SPEED_8_0GT ? "8.0GT/s" :
+		    speed == PCIE_SPEED_5_0GT ? "5.0GT/s" :
+		    speed == PCIE_SPEED_2_5GT ? "2.5GT/s" :
+		    "Unknown"),
+		   width,
+		   (speed == PCIE_SPEED_2_5GT ? "20%" :
+		    speed == PCIE_SPEED_5_0GT ? "20%" :
+		    speed == PCIE_SPEED_8_0GT ? "<2%" :
+		    "Unknown"));
+
+	if (max_gts < expected_gts) {
+		e_dev_warn("This is not sufficient for optimal performance of this card.\n");
+		e_dev_warn("For optimal performance, at least %dGT/s of bandwidth is required.\n",
+			expected_gts);
+		e_dev_warn("A slot with more lanes and/or higher speed is suggested.\n");
+	}
+}
+
+static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter)
+{
+	if (!test_bit(__IXGBE_DOWN, &adapter->state) &&
+	    !test_bit(__IXGBE_REMOVING, &adapter->state) &&
+	    !test_and_set_bit(__IXGBE_SERVICE_SCHED, &adapter->state))
+		schedule_work(&adapter->service_task);
+}
+
+static void ixgbe_remove_adapter(struct ixgbe_hw *hw)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+
+	if (!hw->hw_addr)
+		return;
+	hw->hw_addr = NULL;
+	e_dev_err("Adapter removed\n");
+	if (test_bit(__IXGBE_SERVICE_INITED, &adapter->state))
+		ixgbe_service_event_schedule(adapter);
+}
+
+static void ixgbe_check_remove(struct ixgbe_hw *hw, u32 reg)
+{
+	u32 value;
+
+	/* The following check not only optimizes a bit by not
+	 * performing a read on the status register when the
+	 * register just read was a status register read that
+	 * returned IXGBE_FAILED_READ_REG. It also blocks any
+	 * potential recursion.
+	 */
+	if (reg == IXGBE_STATUS) {
+		ixgbe_remove_adapter(hw);
+		return;
+	}
+	value = ixgbe_read_reg(hw, IXGBE_STATUS);
+	if (value == IXGBE_FAILED_READ_REG)
+		ixgbe_remove_adapter(hw);
+}
+
+/**
+ * ixgbe_read_reg - Read from device register
+ * @hw: hw specific details
+ * @reg: offset of register to read
+ *
+ * Returns : value read or IXGBE_FAILED_READ_REG if removed
+ *
+ * This function is used to read device registers. It checks for device
+ * removal by confirming any read that returns all ones by checking the
+ * status register value for all ones. This function avoids reading from
+ * the hardware if a removal was previously detected in which case it
+ * returns IXGBE_FAILED_READ_REG (all ones).
+ */
+u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg)
+{
+	u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr);
+	u32 value;
+
+	if (ixgbe_removed(reg_addr))
+		return IXGBE_FAILED_READ_REG;
+	value = readl(reg_addr + reg);
+	if (unlikely(value == IXGBE_FAILED_READ_REG))
+		ixgbe_check_remove(hw, reg);
+	return value;
+}
+
+static bool ixgbe_check_cfg_remove(struct ixgbe_hw *hw, struct pci_dev *pdev)
+{
+	u16 value;
+
+	pci_read_config_word(pdev, PCI_VENDOR_ID, &value);
+	if (value == IXGBE_FAILED_READ_CFG_WORD) {
+		ixgbe_remove_adapter(hw);
+		return true;
+	}
+	return false;
+}
+
+u16 ixgbe_read_pci_cfg_word(struct ixgbe_hw *hw, u32 reg)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+	u16 value;
+
+	if (ixgbe_removed(hw->hw_addr))
+		return IXGBE_FAILED_READ_CFG_WORD;
+	pci_read_config_word(adapter->pdev, reg, &value);
+	if (value == IXGBE_FAILED_READ_CFG_WORD &&
+	    ixgbe_check_cfg_remove(hw, adapter->pdev))
+		return IXGBE_FAILED_READ_CFG_WORD;
+	return value;
+}
+
+#ifdef CONFIG_PCI_IOV
+static u32 ixgbe_read_pci_cfg_dword(struct ixgbe_hw *hw, u32 reg)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+	u32 value;
+
+	if (ixgbe_removed(hw->hw_addr))
+		return IXGBE_FAILED_READ_CFG_DWORD;
+	pci_read_config_dword(adapter->pdev, reg, &value);
+	if (value == IXGBE_FAILED_READ_CFG_DWORD &&
+	    ixgbe_check_cfg_remove(hw, adapter->pdev))
+		return IXGBE_FAILED_READ_CFG_DWORD;
+	return value;
+}
+#endif /* CONFIG_PCI_IOV */
+
+void ixgbe_write_pci_cfg_word(struct ixgbe_hw *hw, u32 reg, u16 value)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+
+	if (ixgbe_removed(hw->hw_addr))
+		return;
+	pci_write_config_word(adapter->pdev, reg, value);
+}
+
+static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter)
+{
+	BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state));
+
+	/* flush memory to make sure state is correct before next watchdog */
+	smp_mb__before_atomic();
+	clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state);
+}
+
+struct ixgbe_reg_info {
+	u32 ofs;
+	char *name;
+};
+
+static const struct ixgbe_reg_info ixgbe_reg_info_tbl[] = {
+
+	/* General Registers */
+	{IXGBE_CTRL, "CTRL"},
+	{IXGBE_STATUS, "STATUS"},
+	{IXGBE_CTRL_EXT, "CTRL_EXT"},
+
+	/* Interrupt Registers */
+	{IXGBE_EICR, "EICR"},
+
+	/* RX Registers */
+	{IXGBE_SRRCTL(0), "SRRCTL"},
+	{IXGBE_DCA_RXCTRL(0), "DRXCTL"},
+	{IXGBE_RDLEN(0), "RDLEN"},
+	{IXGBE_RDH(0), "RDH"},
+	{IXGBE_RDT(0), "RDT"},
+	{IXGBE_RXDCTL(0), "RXDCTL"},
+	{IXGBE_RDBAL(0), "RDBAL"},
+	{IXGBE_RDBAH(0), "RDBAH"},
+
+	/* TX Registers */
+	{IXGBE_TDBAL(0), "TDBAL"},
+	{IXGBE_TDBAH(0), "TDBAH"},
+	{IXGBE_TDLEN(0), "TDLEN"},
+	{IXGBE_TDH(0), "TDH"},
+	{IXGBE_TDT(0), "TDT"},
+	{IXGBE_TXDCTL(0), "TXDCTL"},
+
+	/* List Terminator */
+	{ .name = NULL }
+};
+
+
+/*
+ * ixgbe_regdump - register printout routine
+ */
+static void ixgbe_regdump(struct ixgbe_hw *hw, struct ixgbe_reg_info *reginfo)
+{
+	int i = 0, j = 0;
+	char rname[16];
+	u32 regs[64];
+
+	switch (reginfo->ofs) {
+	case IXGBE_SRRCTL(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
+		break;
+	case IXGBE_DCA_RXCTRL(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+		break;
+	case IXGBE_RDLEN(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i));
+		break;
+	case IXGBE_RDH(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_RDH(i));
+		break;
+	case IXGBE_RDT(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_RDT(i));
+		break;
+	case IXGBE_RXDCTL(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+		break;
+	case IXGBE_RDBAL(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i));
+		break;
+	case IXGBE_RDBAH(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i));
+		break;
+	case IXGBE_TDBAL(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i));
+		break;
+	case IXGBE_TDBAH(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i));
+		break;
+	case IXGBE_TDLEN(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i));
+		break;
+	case IXGBE_TDH(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_TDH(i));
+		break;
+	case IXGBE_TDT(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_TDT(i));
+		break;
+	case IXGBE_TXDCTL(0):
+		for (i = 0; i < 64; i++)
+			regs[i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
+		break;
+	default:
+		pr_info("%-15s %08x\n", reginfo->name,
+			IXGBE_READ_REG(hw, reginfo->ofs));
+		return;
+	}
+
+	for (i = 0; i < 8; i++) {
+		snprintf(rname, 16, "%s[%d-%d]", reginfo->name, i*8, i*8+7);
+		pr_err("%-15s", rname);
+		for (j = 0; j < 8; j++)
+			pr_cont(" %08x", regs[i*8+j]);
+		pr_cont("\n");
+	}
+
+}
+
+/*
+ * ixgbe_dump - Print registers, tx-rings and rx-rings
+ */
+static void ixgbe_dump(struct ixgbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_reg_info *reginfo;
+	int n = 0;
+	struct ixgbe_ring *tx_ring;
+	struct ixgbe_tx_buffer *tx_buffer;
+	union ixgbe_adv_tx_desc *tx_desc;
+	struct my_u0 { u64 a; u64 b; } *u0;
+	struct ixgbe_ring *rx_ring;
+	union ixgbe_adv_rx_desc *rx_desc;
+	struct ixgbe_rx_buffer *rx_buffer_info;
+	u32 staterr;
+	int i = 0;
+
+	if (!netif_msg_hw(adapter))
+		return;
+
+	/* Print netdevice Info */
+	if (netdev) {
+		dev_info(&adapter->pdev->dev, "Net device Info\n");
+		pr_info("Device Name     state            "
+			"trans_start      last_rx\n");
+		pr_info("%-15s %016lX %016lX %016lX\n",
+			netdev->name,
+			netdev->state,
+			netdev->trans_start,
+			netdev->last_rx);
+	}
+
+	/* Print Registers */
+	dev_info(&adapter->pdev->dev, "Register Dump\n");
+	pr_info(" Register Name   Value\n");
+	for (reginfo = (struct ixgbe_reg_info *)ixgbe_reg_info_tbl;
+	     reginfo->name; reginfo++) {
+		ixgbe_regdump(hw, reginfo);
+	}
+
+	/* Print TX Ring Summary */
+	if (!netdev || !netif_running(netdev))
+		return;
+
+	dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
+	pr_info(" %s     %s              %s        %s\n",
+		"Queue [NTU] [NTC] [bi(ntc)->dma  ]",
+		"leng", "ntw", "timestamp");
+	for (n = 0; n < adapter->num_tx_queues; n++) {
+		tx_ring = adapter->tx_ring[n];
+		tx_buffer = &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
+		pr_info(" %5d %5X %5X %016llX %08X %p %016llX\n",
+			   n, tx_ring->next_to_use, tx_ring->next_to_clean,
+			   (u64)dma_unmap_addr(tx_buffer, dma),
+			   dma_unmap_len(tx_buffer, len),
+			   tx_buffer->next_to_watch,
+			   (u64)tx_buffer->time_stamp);
+	}
+
+	/* Print TX Rings */
+	if (!netif_msg_tx_done(adapter))
+		goto rx_ring_summary;
+
+	dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
+
+	/* Transmit Descriptor Formats
+	 *
+	 * 82598 Advanced Transmit Descriptor
+	 *   +--------------------------------------------------------------+
+	 * 0 |         Buffer Address [63:0]                                |
+	 *   +--------------------------------------------------------------+
+	 * 8 |  PAYLEN  | POPTS  | IDX | STA | DCMD  |DTYP |  RSV |  DTALEN |
+	 *   +--------------------------------------------------------------+
+	 *   63       46 45    40 39 36 35 32 31   24 23 20 19              0
+	 *
+	 * 82598 Advanced Transmit Descriptor (Write-Back Format)
+	 *   +--------------------------------------------------------------+
+	 * 0 |                          RSV [63:0]                          |
+	 *   +--------------------------------------------------------------+
+	 * 8 |            RSV           |  STA  |          NXTSEQ           |
+	 *   +--------------------------------------------------------------+
+	 *   63                       36 35   32 31                         0
+	 *
+	 * 82599+ Advanced Transmit Descriptor
+	 *   +--------------------------------------------------------------+
+	 * 0 |         Buffer Address [63:0]                                |
+	 *   +--------------------------------------------------------------+
+	 * 8 |PAYLEN  |POPTS|CC|IDX  |STA  |DCMD  |DTYP |MAC  |RSV  |DTALEN |
+	 *   +--------------------------------------------------------------+
+	 *   63     46 45 40 39 38 36 35 32 31  24 23 20 19 18 17 16 15     0
+	 *
+	 * 82599+ Advanced Transmit Descriptor (Write-Back Format)
+	 *   +--------------------------------------------------------------+
+	 * 0 |                          RSV [63:0]                          |
+	 *   +--------------------------------------------------------------+
+	 * 8 |            RSV           |  STA  |           RSV             |
+	 *   +--------------------------------------------------------------+
+	 *   63                       36 35   32 31                         0
+	 */
+
+	for (n = 0; n < adapter->num_tx_queues; n++) {
+		tx_ring = adapter->tx_ring[n];
+		pr_info("------------------------------------\n");
+		pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
+		pr_info("------------------------------------\n");
+		pr_info("%s%s    %s              %s        %s          %s\n",
+			"T [desc]     [address 63:0  ] ",
+			"[PlPOIdStDDt Ln] [bi->dma       ] ",
+			"leng", "ntw", "timestamp", "bi->skb");
+
+		for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+			tx_desc = IXGBE_TX_DESC(tx_ring, i);
+			tx_buffer = &tx_ring->tx_buffer_info[i];
+			u0 = (struct my_u0 *)tx_desc;
+			if (dma_unmap_len(tx_buffer, len) > 0) {
+				pr_info("T [0x%03X]    %016llX %016llX %016llX %08X %p %016llX %p",
+					i,
+					le64_to_cpu(u0->a),
+					le64_to_cpu(u0->b),
+					(u64)dma_unmap_addr(tx_buffer, dma),
+					dma_unmap_len(tx_buffer, len),
+					tx_buffer->next_to_watch,
+					(u64)tx_buffer->time_stamp,
+					tx_buffer->skb);
+				if (i == tx_ring->next_to_use &&
+					i == tx_ring->next_to_clean)
+					pr_cont(" NTC/U\n");
+				else if (i == tx_ring->next_to_use)
+					pr_cont(" NTU\n");
+				else if (i == tx_ring->next_to_clean)
+					pr_cont(" NTC\n");
+				else
+					pr_cont("\n");
+
+				if (netif_msg_pktdata(adapter) &&
+				    tx_buffer->skb)
+					print_hex_dump(KERN_INFO, "",
+						DUMP_PREFIX_ADDRESS, 16, 1,
+						tx_buffer->skb->data,
+						dma_unmap_len(tx_buffer, len),
+						true);
+			}
+		}
+	}
+
+	/* Print RX Rings Summary */
+rx_ring_summary:
+	dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
+	pr_info("Queue [NTU] [NTC]\n");
+	for (n = 0; n < adapter->num_rx_queues; n++) {
+		rx_ring = adapter->rx_ring[n];
+		pr_info("%5d %5X %5X\n",
+			n, rx_ring->next_to_use, rx_ring->next_to_clean);
+	}
+
+	/* Print RX Rings */
+	if (!netif_msg_rx_status(adapter))
+		return;
+
+	dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
+
+	/* Receive Descriptor Formats
+	 *
+	 * 82598 Advanced Receive Descriptor (Read) Format
+	 *    63                                           1        0
+	 *    +-----------------------------------------------------+
+	 *  0 |       Packet Buffer Address [63:1]           |A0/NSE|
+	 *    +----------------------------------------------+------+
+	 *  8 |       Header Buffer Address [63:1]           |  DD  |
+	 *    +-----------------------------------------------------+
+	 *
+	 *
+	 * 82598 Advanced Receive Descriptor (Write-Back) Format
+	 *
+	 *   63       48 47    32 31  30      21 20 16 15   4 3     0
+	 *   +------------------------------------------------------+
+	 * 0 |       RSS Hash /  |SPH| HDR_LEN  | RSV |Packet|  RSS |
+	 *   | Packet   | IP     |   |          |     | Type | Type |
+	 *   | Checksum | Ident  |   |          |     |      |      |
+	 *   +------------------------------------------------------+
+	 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+	 *   +------------------------------------------------------+
+	 *   63       48 47    32 31            20 19               0
+	 *
+	 * 82599+ Advanced Receive Descriptor (Read) Format
+	 *    63                                           1        0
+	 *    +-----------------------------------------------------+
+	 *  0 |       Packet Buffer Address [63:1]           |A0/NSE|
+	 *    +----------------------------------------------+------+
+	 *  8 |       Header Buffer Address [63:1]           |  DD  |
+	 *    +-----------------------------------------------------+
+	 *
+	 *
+	 * 82599+ Advanced Receive Descriptor (Write-Back) Format
+	 *
+	 *   63       48 47    32 31  30      21 20 17 16   4 3     0
+	 *   +------------------------------------------------------+
+	 * 0 |RSS / Frag Checksum|SPH| HDR_LEN  |RSC- |Packet|  RSS |
+	 *   |/ RTT / PCoE_PARAM |   |          | CNT | Type | Type |
+	 *   |/ Flow Dir Flt ID  |   |          |     |      |      |
+	 *   +------------------------------------------------------+
+	 * 8 | VLAN Tag | Length |Extended Error| Xtnd Status/NEXTP |
+	 *   +------------------------------------------------------+
+	 *   63       48 47    32 31          20 19                 0
+	 */
+
+	for (n = 0; n < adapter->num_rx_queues; n++) {
+		rx_ring = adapter->rx_ring[n];
+		pr_info("------------------------------------\n");
+		pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
+		pr_info("------------------------------------\n");
+		pr_info("%s%s%s",
+			"R  [desc]      [ PktBuf     A0] ",
+			"[  HeadBuf   DD] [bi->dma       ] [bi->skb       ] ",
+			"<-- Adv Rx Read format\n");
+		pr_info("%s%s%s",
+			"RWB[desc]      [PcsmIpSHl PtRs] ",
+			"[vl er S cks ln] ---------------- [bi->skb       ] ",
+			"<-- Adv Rx Write-Back format\n");
+
+		for (i = 0; i < rx_ring->count; i++) {
+			rx_buffer_info = &rx_ring->rx_buffer_info[i];
+			rx_desc = IXGBE_RX_DESC(rx_ring, i);
+			u0 = (struct my_u0 *)rx_desc;
+			staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+			if (staterr & IXGBE_RXD_STAT_DD) {
+				/* Descriptor Done */
+				pr_info("RWB[0x%03X]     %016llX "
+					"%016llX ---------------- %p", i,
+					le64_to_cpu(u0->a),
+					le64_to_cpu(u0->b),
+					rx_buffer_info->skb);
+			} else {
+				pr_info("R  [0x%03X]     %016llX "
+					"%016llX %016llX %p", i,
+					le64_to_cpu(u0->a),
+					le64_to_cpu(u0->b),
+					(u64)rx_buffer_info->dma,
+					rx_buffer_info->skb);
+
+				if (netif_msg_pktdata(adapter) &&
+				    rx_buffer_info->dma) {
+					print_hex_dump(KERN_INFO, "",
+					   DUMP_PREFIX_ADDRESS, 16, 1,
+					   page_address(rx_buffer_info->page) +
+						    rx_buffer_info->page_offset,
+					   ixgbe_rx_bufsz(rx_ring), true);
+				}
+			}
+
+			if (i == rx_ring->next_to_use)
+				pr_cont(" NTU\n");
+			else if (i == rx_ring->next_to_clean)
+				pr_cont(" NTC\n");
+			else
+				pr_cont("\n");
+
+		}
+	}
+}
+
+static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter)
+{
+	u32 ctrl_ext;
+
+	/* Let firmware take over control of h/w */
+	ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT,
+			ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD);
+}
+
+static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter)
+{
+	u32 ctrl_ext;
+
+	/* Let firmware know the driver has taken over */
+	ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT,
+			ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD);
+}
+
+/**
+ * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors
+ * @adapter: pointer to adapter struct
+ * @direction: 0 for Rx, 1 for Tx, -1 for other causes
+ * @queue: queue to map the corresponding interrupt to
+ * @msix_vector: the vector to map to the corresponding queue
+ *
+ */
+static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction,
+			   u8 queue, u8 msix_vector)
+{
+	u32 ivar, index;
+	struct ixgbe_hw *hw = &adapter->hw;
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+		if (direction == -1)
+			direction = 0;
+		index = (((direction * 64) + queue) >> 2) & 0x1F;
+		ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index));
+		ivar &= ~(0xFF << (8 * (queue & 0x3)));
+		ivar |= (msix_vector << (8 * (queue & 0x3)));
+		IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		if (direction == -1) {
+			/* other causes */
+			msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+			index = ((queue & 1) * 8);
+			ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR_MISC);
+			ivar &= ~(0xFF << index);
+			ivar |= (msix_vector << index);
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR_MISC, ivar);
+			break;
+		} else {
+			/* tx or rx causes */
+			msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+			index = ((16 * (queue & 1)) + (8 * direction));
+			ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(queue >> 1));
+			ivar &= ~(0xFF << index);
+			ivar |= (msix_vector << index);
+			IXGBE_WRITE_REG(hw, IXGBE_IVAR(queue >> 1), ivar);
+			break;
+		}
+	default:
+		break;
+	}
+}
+
+static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter,
+					  u64 qmask)
+{
+	u32 mask;
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
+		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		mask = (qmask & 0xFFFFFFFF);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask);
+		mask = (qmask >> 32);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask);
+		break;
+	default:
+		break;
+	}
+}
+
+void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *ring,
+				      struct ixgbe_tx_buffer *tx_buffer)
+{
+	if (tx_buffer->skb) {
+		dev_kfree_skb_any(tx_buffer->skb);
+		if (dma_unmap_len(tx_buffer, len))
+			dma_unmap_single(ring->dev,
+					 dma_unmap_addr(tx_buffer, dma),
+					 dma_unmap_len(tx_buffer, len),
+					 DMA_TO_DEVICE);
+	} else if (dma_unmap_len(tx_buffer, len)) {
+		dma_unmap_page(ring->dev,
+			       dma_unmap_addr(tx_buffer, dma),
+			       dma_unmap_len(tx_buffer, len),
+			       DMA_TO_DEVICE);
+	}
+	tx_buffer->next_to_watch = NULL;
+	tx_buffer->skb = NULL;
+	dma_unmap_len_set(tx_buffer, len, 0);
+	/* tx_buffer must be completely set up in the transmit path */
+}
+
+static void ixgbe_update_xoff_rx_lfc(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_hw_stats *hwstats = &adapter->stats;
+	int i;
+	u32 data;
+
+	if ((hw->fc.current_mode != ixgbe_fc_full) &&
+	    (hw->fc.current_mode != ixgbe_fc_rx_pause))
+		return;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
+		break;
+	default:
+		data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
+	}
+	hwstats->lxoffrxc += data;
+
+	/* refill credits (no tx hang) if we received xoff */
+	if (!data)
+		return;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		clear_bit(__IXGBE_HANG_CHECK_ARMED,
+			  &adapter->tx_ring[i]->state);
+}
+
+static void ixgbe_update_xoff_received(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_hw_stats *hwstats = &adapter->stats;
+	u32 xoff[8] = {0};
+	u8 tc;
+	int i;
+	bool pfc_en = adapter->dcb_cfg.pfc_mode_enable;
+
+	if (adapter->ixgbe_ieee_pfc)
+		pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en);
+
+	if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED) || !pfc_en) {
+		ixgbe_update_xoff_rx_lfc(adapter);
+		return;
+	}
+
+	/* update stats for each tc, only valid with PFC enabled */
+	for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) {
+		u32 pxoffrxc;
+
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
+			pxoffrxc = IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
+			break;
+		default:
+			pxoffrxc = IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
+		}
+		hwstats->pxoffrxc[i] += pxoffrxc;
+		/* Get the TC for given UP */
+		tc = netdev_get_prio_tc_map(adapter->netdev, i);
+		xoff[tc] += pxoffrxc;
+	}
+
+	/* disarm tx queues that have received xoff frames */
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
+
+		tc = tx_ring->dcb_tc;
+		if (xoff[tc])
+			clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state);
+	}
+}
+
+static u64 ixgbe_get_tx_completed(struct ixgbe_ring *ring)
+{
+	return ring->stats.packets;
+}
+
+static u64 ixgbe_get_tx_pending(struct ixgbe_ring *ring)
+{
+	struct ixgbe_adapter *adapter;
+	struct ixgbe_hw *hw;
+	u32 head, tail;
+
+	if (ring->l2_accel_priv)
+		adapter = ring->l2_accel_priv->real_adapter;
+	else
+		adapter = netdev_priv(ring->netdev);
+
+	hw = &adapter->hw;
+	head = IXGBE_READ_REG(hw, IXGBE_TDH(ring->reg_idx));
+	tail = IXGBE_READ_REG(hw, IXGBE_TDT(ring->reg_idx));
+
+	if (head != tail)
+		return (head < tail) ?
+			tail - head : (tail + ring->count - head);
+
+	return 0;
+}
+
+static inline bool ixgbe_check_tx_hang(struct ixgbe_ring *tx_ring)
+{
+	u32 tx_done = ixgbe_get_tx_completed(tx_ring);
+	u32 tx_done_old = tx_ring->tx_stats.tx_done_old;
+	u32 tx_pending = ixgbe_get_tx_pending(tx_ring);
+
+	clear_check_for_tx_hang(tx_ring);
+
+	/*
+	 * Check for a hung queue, but be thorough. This verifies
+	 * that a transmit has been completed since the previous
+	 * check AND there is at least one packet pending. The
+	 * ARMED bit is set to indicate a potential hang. The
+	 * bit is cleared if a pause frame is received to remove
+	 * false hang detection due to PFC or 802.3x frames. By
+	 * requiring this to fail twice we avoid races with
+	 * pfc clearing the ARMED bit and conditions where we
+	 * run the check_tx_hang logic with a transmit completion
+	 * pending but without time to complete it yet.
+	 */
+	if (tx_done_old == tx_done && tx_pending)
+		/* make sure it is true for two checks in a row */
+		return test_and_set_bit(__IXGBE_HANG_CHECK_ARMED,
+					&tx_ring->state);
+	/* update completed stats and continue */
+	tx_ring->tx_stats.tx_done_old = tx_done;
+	/* reset the countdown */
+	clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state);
+
+	return false;
+}
+
+/**
+ * ixgbe_tx_timeout_reset - initiate reset due to Tx timeout
+ * @adapter: driver private struct
+ **/
+static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter)
+{
+
+	/* Do the reset outside of interrupt context */
+	if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+		adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+		e_warn(drv, "initiating reset due to tx timeout\n");
+		ixgbe_service_event_schedule(adapter);
+	}
+}
+
+/**
+ * ixgbe_clean_tx_irq - Reclaim resources after transmit completes
+ * @q_vector: structure containing interrupt and ring information
+ * @tx_ring: tx ring to clean
+ **/
+static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
+			       struct ixgbe_ring *tx_ring)
+{
+	struct ixgbe_adapter *adapter = q_vector->adapter;
+	struct ixgbe_tx_buffer *tx_buffer;
+	union ixgbe_adv_tx_desc *tx_desc;
+	unsigned int total_bytes = 0, total_packets = 0;
+	unsigned int budget = q_vector->tx.work_limit;
+	unsigned int i = tx_ring->next_to_clean;
+
+	if (test_bit(__IXGBE_DOWN, &adapter->state))
+		return true;
+
+	tx_buffer = &tx_ring->tx_buffer_info[i];
+	tx_desc = IXGBE_TX_DESC(tx_ring, i);
+	i -= tx_ring->count;
+
+	do {
+		union ixgbe_adv_tx_desc *eop_desc = tx_buffer->next_to_watch;
+
+		/* if next_to_watch is not set then there is no work pending */
+		if (!eop_desc)
+			break;
+
+		/* prevent any other reads prior to eop_desc */
+		read_barrier_depends();
+
+		/* if DD is not set pending work has not been completed */
+		if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)))
+			break;
+
+		/* clear next_to_watch to prevent false hangs */
+		tx_buffer->next_to_watch = NULL;
+
+		/* update the statistics for this packet */
+		total_bytes += tx_buffer->bytecount;
+		total_packets += tx_buffer->gso_segs;
+
+		/* free the skb */
+		dev_consume_skb_any(tx_buffer->skb);
+
+		/* unmap skb header data */
+		dma_unmap_single(tx_ring->dev,
+				 dma_unmap_addr(tx_buffer, dma),
+				 dma_unmap_len(tx_buffer, len),
+				 DMA_TO_DEVICE);
+
+		/* clear tx_buffer data */
+		tx_buffer->skb = NULL;
+		dma_unmap_len_set(tx_buffer, len, 0);
+
+		/* unmap remaining buffers */
+		while (tx_desc != eop_desc) {
+			tx_buffer++;
+			tx_desc++;
+			i++;
+			if (unlikely(!i)) {
+				i -= tx_ring->count;
+				tx_buffer = tx_ring->tx_buffer_info;
+				tx_desc = IXGBE_TX_DESC(tx_ring, 0);
+			}
+
+			/* unmap any remaining paged data */
+			if (dma_unmap_len(tx_buffer, len)) {
+				dma_unmap_page(tx_ring->dev,
+					       dma_unmap_addr(tx_buffer, dma),
+					       dma_unmap_len(tx_buffer, len),
+					       DMA_TO_DEVICE);
+				dma_unmap_len_set(tx_buffer, len, 0);
+			}
+		}
+
+		/* move us one more past the eop_desc for start of next pkt */
+		tx_buffer++;
+		tx_desc++;
+		i++;
+		if (unlikely(!i)) {
+			i -= tx_ring->count;
+			tx_buffer = tx_ring->tx_buffer_info;
+			tx_desc = IXGBE_TX_DESC(tx_ring, 0);
+		}
+
+		/* issue prefetch for next Tx descriptor */
+		prefetch(tx_desc);
+
+		/* update budget accounting */
+		budget--;
+	} while (likely(budget));
+
+	i += tx_ring->count;
+	tx_ring->next_to_clean = i;
+	u64_stats_update_begin(&tx_ring->syncp);
+	tx_ring->stats.bytes += total_bytes;
+	tx_ring->stats.packets += total_packets;
+	u64_stats_update_end(&tx_ring->syncp);
+	q_vector->tx.total_bytes += total_bytes;
+	q_vector->tx.total_packets += total_packets;
+
+	if (check_for_tx_hang(tx_ring) && ixgbe_check_tx_hang(tx_ring)) {
+		/* schedule immediate reset if we believe we hung */
+		struct ixgbe_hw *hw = &adapter->hw;
+		e_err(drv, "Detected Tx Unit Hang\n"
+			"  Tx Queue             <%d>\n"
+			"  TDH, TDT             <%x>, <%x>\n"
+			"  next_to_use          <%x>\n"
+			"  next_to_clean        <%x>\n"
+			"tx_buffer_info[next_to_clean]\n"
+			"  time_stamp           <%lx>\n"
+			"  jiffies              <%lx>\n",
+			tx_ring->queue_index,
+			IXGBE_READ_REG(hw, IXGBE_TDH(tx_ring->reg_idx)),
+			IXGBE_READ_REG(hw, IXGBE_TDT(tx_ring->reg_idx)),
+			tx_ring->next_to_use, i,
+			tx_ring->tx_buffer_info[i].time_stamp, jiffies);
+
+		netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
+
+		e_info(probe,
+		       "tx hang %d detected on queue %d, resetting adapter\n",
+			adapter->tx_timeout_count + 1, tx_ring->queue_index);
+
+		/* schedule immediate reset if we believe we hung */
+		ixgbe_tx_timeout_reset(adapter);
+
+		/* the adapter is about to reset, no point in enabling stuff */
+		return true;
+	}
+
+	netdev_tx_completed_queue(txring_txq(tx_ring),
+				  total_packets, total_bytes);
+
+#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
+	if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) &&
+		     (ixgbe_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) {
+		/* Make sure that anybody stopping the queue after this
+		 * sees the new next_to_clean.
+		 */
+		smp_mb();
+		if (__netif_subqueue_stopped(tx_ring->netdev,
+					     tx_ring->queue_index)
+		    && !test_bit(__IXGBE_DOWN, &adapter->state)) {
+			netif_wake_subqueue(tx_ring->netdev,
+					    tx_ring->queue_index);
+			++tx_ring->tx_stats.restart_queue;
+		}
+	}
+
+	return !!budget;
+}
+
+#ifdef CONFIG_IXGBE_DCA
+static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
+				struct ixgbe_ring *tx_ring,
+				int cpu)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 txctrl = dca3_get_tag(tx_ring->dev, cpu);
+	u16 reg_offset;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		reg_offset = IXGBE_DCA_TXCTRL(tx_ring->reg_idx);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		reg_offset = IXGBE_DCA_TXCTRL_82599(tx_ring->reg_idx);
+		txctrl <<= IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599;
+		break;
+	default:
+		/* for unknown hardware do not write register */
+		return;
+	}
+
+	/*
+	 * We can enable relaxed ordering for reads, but not writes when
+	 * DCA is enabled.  This is due to a known issue in some chipsets
+	 * which will cause the DCA tag to be cleared.
+	 */
+	txctrl |= IXGBE_DCA_TXCTRL_DESC_RRO_EN |
+		  IXGBE_DCA_TXCTRL_DATA_RRO_EN |
+		  IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+
+	IXGBE_WRITE_REG(hw, reg_offset, txctrl);
+}
+
+static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
+				struct ixgbe_ring *rx_ring,
+				int cpu)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 rxctrl = dca3_get_tag(rx_ring->dev, cpu);
+	u8 reg_idx = rx_ring->reg_idx;
+
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		rxctrl <<= IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599;
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * We can enable relaxed ordering for reads, but not writes when
+	 * DCA is enabled.  This is due to a known issue in some chipsets
+	 * which will cause the DCA tag to be cleared.
+	 */
+	rxctrl |= IXGBE_DCA_RXCTRL_DESC_RRO_EN |
+		  IXGBE_DCA_RXCTRL_DESC_DCA_EN;
+
+	IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl);
+}
+
+static void ixgbe_update_dca(struct ixgbe_q_vector *q_vector)
+{
+	struct ixgbe_adapter *adapter = q_vector->adapter;
+	struct ixgbe_ring *ring;
+	int cpu = get_cpu();
+
+	if (q_vector->cpu == cpu)
+		goto out_no_update;
+
+	ixgbe_for_each_ring(ring, q_vector->tx)
+		ixgbe_update_tx_dca(adapter, ring, cpu);
+
+	ixgbe_for_each_ring(ring, q_vector->rx)
+		ixgbe_update_rx_dca(adapter, ring, cpu);
+
+	q_vector->cpu = cpu;
+out_no_update:
+	put_cpu();
+}
+
+static void ixgbe_setup_dca(struct ixgbe_adapter *adapter)
+{
+	int i;
+
+	if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED))
+		return;
+
+	/* always use CB2 mode, difference is masked in the CB driver */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		adapter->q_vector[i]->cpu = -1;
+		ixgbe_update_dca(adapter->q_vector[i]);
+	}
+}
+
+static int __ixgbe_notify_dca(struct device *dev, void *data)
+{
+	struct ixgbe_adapter *adapter = dev_get_drvdata(dev);
+	unsigned long event = *(unsigned long *)data;
+
+	if (!(adapter->flags & IXGBE_FLAG_DCA_CAPABLE))
+		return 0;
+
+	switch (event) {
+	case DCA_PROVIDER_ADD:
+		/* if we're already enabled, don't do it again */
+		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+			break;
+		if (dca_add_requester(dev) == 0) {
+			adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
+			ixgbe_setup_dca(adapter);
+			break;
+		}
+		/* Fall Through since DCA is disabled. */
+	case DCA_PROVIDER_REMOVE:
+		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
+			dca_remove_requester(dev);
+			adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1);
+		}
+		break;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_IXGBE_DCA */
+static inline void ixgbe_rx_hash(struct ixgbe_ring *ring,
+				 union ixgbe_adv_rx_desc *rx_desc,
+				 struct sk_buff *skb)
+{
+	if (ring->netdev->features & NETIF_F_RXHASH)
+		skb_set_hash(skb,
+			     le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
+			     PKT_HASH_TYPE_L3);
+}
+
+#ifdef IXGBE_FCOE
+/**
+ * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type
+ * @ring: structure containing ring specific data
+ * @rx_desc: advanced rx descriptor
+ *
+ * Returns : true if it is FCoE pkt
+ */
+static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring,
+				    union ixgbe_adv_rx_desc *rx_desc)
+{
+	__le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
+
+	return test_bit(__IXGBE_RX_FCOE, &ring->state) &&
+	       ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) ==
+		(cpu_to_le16(IXGBE_ETQF_FILTER_FCOE <<
+			     IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT)));
+}
+
+#endif /* IXGBE_FCOE */
+/**
+ * ixgbe_rx_checksum - indicate in skb if hw indicated a good cksum
+ * @ring: structure containing ring specific data
+ * @rx_desc: current Rx descriptor being processed
+ * @skb: skb currently being received and modified
+ **/
+static inline void ixgbe_rx_checksum(struct ixgbe_ring *ring,
+				     union ixgbe_adv_rx_desc *rx_desc,
+				     struct sk_buff *skb)
+{
+	__le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
+	__le16 hdr_info = rx_desc->wb.lower.lo_dword.hs_rss.hdr_info;
+	bool encap_pkt = false;
+
+	skb_checksum_none_assert(skb);
+
+	/* Rx csum disabled */
+	if (!(ring->netdev->features & NETIF_F_RXCSUM))
+		return;
+
+	if ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_VXLAN)) &&
+	    (hdr_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_TUNNEL >> 16))) {
+		encap_pkt = true;
+		skb->encapsulation = 1;
+		skb->ip_summed = CHECKSUM_NONE;
+	}
+
+	/* if IP and error */
+	if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_IPCS) &&
+	    ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_IPE)) {
+		ring->rx_stats.csum_err++;
+		return;
+	}
+
+	if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_L4CS))
+		return;
+
+	if (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_TCPE)) {
+		/*
+		 * 82599 errata, UDP frames with a 0 checksum can be marked as
+		 * checksum errors.
+		 */
+		if ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_UDP)) &&
+		    test_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR, &ring->state))
+			return;
+
+		ring->rx_stats.csum_err++;
+		return;
+	}
+
+	/* It must be a TCP or UDP packet with a valid checksum */
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	if (encap_pkt) {
+		if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_OUTERIPCS))
+			return;
+
+		if (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_OUTERIPER)) {
+			ring->rx_stats.csum_err++;
+			return;
+		}
+		/* If we checked the outer header let the stack know */
+		skb->csum_level = 1;
+	}
+}
+
+static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring,
+				    struct ixgbe_rx_buffer *bi)
+{
+	struct page *page = bi->page;
+	dma_addr_t dma;
+
+	/* since we are recycling buffers we should seldom need to alloc */
+	if (likely(page))
+		return true;
+
+	/* alloc new page for storage */
+	page = dev_alloc_pages(ixgbe_rx_pg_order(rx_ring));
+	if (unlikely(!page)) {
+		rx_ring->rx_stats.alloc_rx_page_failed++;
+		return false;
+	}
+
+	/* map page for use */
+	dma = dma_map_page(rx_ring->dev, page, 0,
+			   ixgbe_rx_pg_size(rx_ring), DMA_FROM_DEVICE);
+
+	/*
+	 * if mapping failed free memory back to system since
+	 * there isn't much point in holding memory we can't use
+	 */
+	if (dma_mapping_error(rx_ring->dev, dma)) {
+		__free_pages(page, ixgbe_rx_pg_order(rx_ring));
+
+		rx_ring->rx_stats.alloc_rx_page_failed++;
+		return false;
+	}
+
+	bi->dma = dma;
+	bi->page = page;
+	bi->page_offset = 0;
+
+	return true;
+}
+
+/**
+ * ixgbe_alloc_rx_buffers - Replace used receive buffers
+ * @rx_ring: ring to place buffers on
+ * @cleaned_count: number of buffers to replace
+ **/
+void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count)
+{
+	union ixgbe_adv_rx_desc *rx_desc;
+	struct ixgbe_rx_buffer *bi;
+	u16 i = rx_ring->next_to_use;
+
+	/* nothing to do */
+	if (!cleaned_count)
+		return;
+
+	rx_desc = IXGBE_RX_DESC(rx_ring, i);
+	bi = &rx_ring->rx_buffer_info[i];
+	i -= rx_ring->count;
+
+	do {
+		if (!ixgbe_alloc_mapped_page(rx_ring, bi))
+			break;
+
+		/*
+		 * Refresh the desc even if buffer_addrs didn't change
+		 * because each write-back erases this info.
+		 */
+		rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset);
+
+		rx_desc++;
+		bi++;
+		i++;
+		if (unlikely(!i)) {
+			rx_desc = IXGBE_RX_DESC(rx_ring, 0);
+			bi = rx_ring->rx_buffer_info;
+			i -= rx_ring->count;
+		}
+
+		/* clear the status bits for the next_to_use descriptor */
+		rx_desc->wb.upper.status_error = 0;
+
+		cleaned_count--;
+	} while (cleaned_count);
+
+	i += rx_ring->count;
+
+	if (rx_ring->next_to_use != i) {
+		rx_ring->next_to_use = i;
+
+		/* update next to alloc since we have filled the ring */
+		rx_ring->next_to_alloc = i;
+
+		/* Force memory writes to complete before letting h/w
+		 * know there are new descriptors to fetch.  (Only
+		 * applicable for weak-ordered memory model archs,
+		 * such as IA-64).
+		 */
+		wmb();
+		writel(i, rx_ring->tail);
+	}
+}
+
+static void ixgbe_set_rsc_gso_size(struct ixgbe_ring *ring,
+				   struct sk_buff *skb)
+{
+	u16 hdr_len = skb_headlen(skb);
+
+	/* set gso_size to avoid messing up TCP MSS */
+	skb_shinfo(skb)->gso_size = DIV_ROUND_UP((skb->len - hdr_len),
+						 IXGBE_CB(skb)->append_cnt);
+	skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
+}
+
+static void ixgbe_update_rsc_stats(struct ixgbe_ring *rx_ring,
+				   struct sk_buff *skb)
+{
+	/* if append_cnt is 0 then frame is not RSC */
+	if (!IXGBE_CB(skb)->append_cnt)
+		return;
+
+	rx_ring->rx_stats.rsc_count += IXGBE_CB(skb)->append_cnt;
+	rx_ring->rx_stats.rsc_flush++;
+
+	ixgbe_set_rsc_gso_size(rx_ring, skb);
+
+	/* gso_size is computed using append_cnt so always clear it last */
+	IXGBE_CB(skb)->append_cnt = 0;
+}
+
+/**
+ * ixgbe_process_skb_fields - Populate skb header fields from Rx descriptor
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being populated
+ *
+ * This function checks the ring, descriptor, and packet information in
+ * order to populate the hash, checksum, VLAN, timestamp, protocol, and
+ * other fields within the skb.
+ **/
+static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring,
+				     union ixgbe_adv_rx_desc *rx_desc,
+				     struct sk_buff *skb)
+{
+	struct net_device *dev = rx_ring->netdev;
+
+	ixgbe_update_rsc_stats(rx_ring, skb);
+
+	ixgbe_rx_hash(rx_ring, rx_desc, skb);
+
+	ixgbe_rx_checksum(rx_ring, rx_desc, skb);
+
+	if (unlikely(ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS)))
+		ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector->adapter, skb);
+
+	if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
+	    ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) {
+		u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan);
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
+	}
+
+	skb_record_rx_queue(skb, rx_ring->queue_index);
+
+	skb->protocol = eth_type_trans(skb, dev);
+}
+
+static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector,
+			 struct sk_buff *skb)
+{
+	if (ixgbe_qv_busy_polling(q_vector))
+		netif_receive_skb(skb);
+	else
+		napi_gro_receive(&q_vector->napi, skb);
+}
+
+/**
+ * ixgbe_is_non_eop - process handling of non-EOP buffers
+ * @rx_ring: Rx ring being processed
+ * @rx_desc: Rx descriptor for current buffer
+ * @skb: Current socket buffer containing buffer in progress
+ *
+ * This function updates next to clean.  If the buffer is an EOP buffer
+ * this function exits returning false, otherwise it will place the
+ * sk_buff in the next buffer to be chained and return true indicating
+ * that this is in fact a non-EOP buffer.
+ **/
+static bool ixgbe_is_non_eop(struct ixgbe_ring *rx_ring,
+			     union ixgbe_adv_rx_desc *rx_desc,
+			     struct sk_buff *skb)
+{
+	u32 ntc = rx_ring->next_to_clean + 1;
+
+	/* fetch, update, and store next to clean */
+	ntc = (ntc < rx_ring->count) ? ntc : 0;
+	rx_ring->next_to_clean = ntc;
+
+	prefetch(IXGBE_RX_DESC(rx_ring, ntc));
+
+	/* update RSC append count if present */
+	if (ring_is_rsc_enabled(rx_ring)) {
+		__le32 rsc_enabled = rx_desc->wb.lower.lo_dword.data &
+				     cpu_to_le32(IXGBE_RXDADV_RSCCNT_MASK);
+
+		if (unlikely(rsc_enabled)) {
+			u32 rsc_cnt = le32_to_cpu(rsc_enabled);
+
+			rsc_cnt >>= IXGBE_RXDADV_RSCCNT_SHIFT;
+			IXGBE_CB(skb)->append_cnt += rsc_cnt - 1;
+
+			/* update ntc based on RSC value */
+			ntc = le32_to_cpu(rx_desc->wb.upper.status_error);
+			ntc &= IXGBE_RXDADV_NEXTP_MASK;
+			ntc >>= IXGBE_RXDADV_NEXTP_SHIFT;
+		}
+	}
+
+	/* if we are the last buffer then there is nothing else to do */
+	if (likely(ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP)))
+		return false;
+
+	/* place skb in next buffer to be received */
+	rx_ring->rx_buffer_info[ntc].skb = skb;
+	rx_ring->rx_stats.non_eop_descs++;
+
+	return true;
+}
+
+/**
+ * ixgbe_pull_tail - ixgbe specific version of skb_pull_tail
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @skb: pointer to current skb being adjusted
+ *
+ * This function is an ixgbe specific version of __pskb_pull_tail.  The
+ * main difference between this version and the original function is that
+ * this function can make several assumptions about the state of things
+ * that allow for significant optimizations versus the standard function.
+ * As a result we can do things like drop a frag and maintain an accurate
+ * truesize for the skb.
+ */
+static void ixgbe_pull_tail(struct ixgbe_ring *rx_ring,
+			    struct sk_buff *skb)
+{
+	struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+	unsigned char *va;
+	unsigned int pull_len;
+
+	/*
+	 * it is valid to use page_address instead of kmap since we are
+	 * working with pages allocated out of the lomem pool per
+	 * alloc_page(GFP_ATOMIC)
+	 */
+	va = skb_frag_address(frag);
+
+	/*
+	 * we need the header to contain the greater of either ETH_HLEN or
+	 * 60 bytes if the skb->len is less than 60 for skb_pad.
+	 */
+	pull_len = eth_get_headlen(va, IXGBE_RX_HDR_SIZE);
+
+	/* align pull length to size of long to optimize memcpy performance */
+	skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
+
+	/* update all of the pointers */
+	skb_frag_size_sub(frag, pull_len);
+	frag->page_offset += pull_len;
+	skb->data_len -= pull_len;
+	skb->tail += pull_len;
+}
+
+/**
+ * ixgbe_dma_sync_frag - perform DMA sync for first frag of SKB
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @skb: pointer to current skb being updated
+ *
+ * This function provides a basic DMA sync up for the first fragment of an
+ * skb.  The reason for doing this is that the first fragment cannot be
+ * unmapped until we have reached the end of packet descriptor for a buffer
+ * chain.
+ */
+static void ixgbe_dma_sync_frag(struct ixgbe_ring *rx_ring,
+				struct sk_buff *skb)
+{
+	/* if the page was released unmap it, else just sync our portion */
+	if (unlikely(IXGBE_CB(skb)->page_released)) {
+		dma_unmap_page(rx_ring->dev, IXGBE_CB(skb)->dma,
+			       ixgbe_rx_pg_size(rx_ring), DMA_FROM_DEVICE);
+		IXGBE_CB(skb)->page_released = false;
+	} else {
+		struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+
+		dma_sync_single_range_for_cpu(rx_ring->dev,
+					      IXGBE_CB(skb)->dma,
+					      frag->page_offset,
+					      ixgbe_rx_bufsz(rx_ring),
+					      DMA_FROM_DEVICE);
+	}
+	IXGBE_CB(skb)->dma = 0;
+}
+
+/**
+ * ixgbe_cleanup_headers - Correct corrupted or empty headers
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being fixed
+ *
+ * Check for corrupted packet headers caused by senders on the local L2
+ * embedded NIC switch not setting up their Tx Descriptors right.  These
+ * should be very rare.
+ *
+ * Also address the case where we are pulling data in on pages only
+ * and as such no data is present in the skb header.
+ *
+ * In addition if skb is not at least 60 bytes we need to pad it so that
+ * it is large enough to qualify as a valid Ethernet frame.
+ *
+ * Returns true if an error was encountered and skb was freed.
+ **/
+static bool ixgbe_cleanup_headers(struct ixgbe_ring *rx_ring,
+				  union ixgbe_adv_rx_desc *rx_desc,
+				  struct sk_buff *skb)
+{
+	struct net_device *netdev = rx_ring->netdev;
+
+	/* verify that the packet does not have any known errors */
+	if (unlikely(ixgbe_test_staterr(rx_desc,
+					IXGBE_RXDADV_ERR_FRAME_ERR_MASK) &&
+	    !(netdev->features & NETIF_F_RXALL))) {
+		dev_kfree_skb_any(skb);
+		return true;
+	}
+
+	/* place header in linear portion of buffer */
+	if (skb_is_nonlinear(skb))
+		ixgbe_pull_tail(rx_ring, skb);
+
+#ifdef IXGBE_FCOE
+	/* do not attempt to pad FCoE Frames as this will disrupt DDP */
+	if (ixgbe_rx_is_fcoe(rx_ring, rx_desc))
+		return false;
+
+#endif
+	/* if eth_skb_pad returns an error the skb was freed */
+	if (eth_skb_pad(skb))
+		return true;
+
+	return false;
+}
+
+/**
+ * ixgbe_reuse_rx_page - page flip buffer and store it back on the ring
+ * @rx_ring: rx descriptor ring to store buffers on
+ * @old_buff: donor buffer to have page reused
+ *
+ * Synchronizes page for reuse by the adapter
+ **/
+static void ixgbe_reuse_rx_page(struct ixgbe_ring *rx_ring,
+				struct ixgbe_rx_buffer *old_buff)
+{
+	struct ixgbe_rx_buffer *new_buff;
+	u16 nta = rx_ring->next_to_alloc;
+
+	new_buff = &rx_ring->rx_buffer_info[nta];
+
+	/* update, and store next to alloc */
+	nta++;
+	rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
+
+	/* transfer page from old buffer to new buffer */
+	*new_buff = *old_buff;
+
+	/* sync the buffer for use by the device */
+	dma_sync_single_range_for_device(rx_ring->dev, new_buff->dma,
+					 new_buff->page_offset,
+					 ixgbe_rx_bufsz(rx_ring),
+					 DMA_FROM_DEVICE);
+}
+
+static inline bool ixgbe_page_is_reserved(struct page *page)
+{
+	return (page_to_nid(page) != numa_mem_id()) || page->pfmemalloc;
+}
+
+/**
+ * ixgbe_add_rx_frag - Add contents of Rx buffer to sk_buff
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @rx_buffer: buffer containing page to add
+ * @rx_desc: descriptor containing length of buffer written by hardware
+ * @skb: sk_buff to place the data into
+ *
+ * This function will add the data contained in rx_buffer->page to the skb.
+ * This is done either through a direct copy if the data in the buffer is
+ * less than the skb header size, otherwise it will just attach the page as
+ * a frag to the skb.
+ *
+ * The function will then update the page offset if necessary and return
+ * true if the buffer can be reused by the adapter.
+ **/
+static bool ixgbe_add_rx_frag(struct ixgbe_ring *rx_ring,
+			      struct ixgbe_rx_buffer *rx_buffer,
+			      union ixgbe_adv_rx_desc *rx_desc,
+			      struct sk_buff *skb)
+{
+	struct page *page = rx_buffer->page;
+	unsigned int size = le16_to_cpu(rx_desc->wb.upper.length);
+#if (PAGE_SIZE < 8192)
+	unsigned int truesize = ixgbe_rx_bufsz(rx_ring);
+#else
+	unsigned int truesize = ALIGN(size, L1_CACHE_BYTES);
+	unsigned int last_offset = ixgbe_rx_pg_size(rx_ring) -
+				   ixgbe_rx_bufsz(rx_ring);
+#endif
+
+	if ((size <= IXGBE_RX_HDR_SIZE) && !skb_is_nonlinear(skb)) {
+		unsigned char *va = page_address(page) + rx_buffer->page_offset;
+
+		memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
+
+		/* page is not reserved, we can reuse buffer as-is */
+		if (likely(!ixgbe_page_is_reserved(page)))
+			return true;
+
+		/* this page cannot be reused so discard it */
+		__free_pages(page, ixgbe_rx_pg_order(rx_ring));
+		return false;
+	}
+
+	skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+			rx_buffer->page_offset, size, truesize);
+
+	/* avoid re-using remote pages */
+	if (unlikely(ixgbe_page_is_reserved(page)))
+		return false;
+
+#if (PAGE_SIZE < 8192)
+	/* if we are only owner of page we can reuse it */
+	if (unlikely(page_count(page) != 1))
+		return false;
+
+	/* flip page offset to other buffer */
+	rx_buffer->page_offset ^= truesize;
+#else
+	/* move offset up to the next cache line */
+	rx_buffer->page_offset += truesize;
+
+	if (rx_buffer->page_offset > last_offset)
+		return false;
+#endif
+
+	/* Even if we own the page, we are not allowed to use atomic_set()
+	 * This would break get_page_unless_zero() users.
+	 */
+	atomic_inc(&page->_count);
+
+	return true;
+}
+
+static struct sk_buff *ixgbe_fetch_rx_buffer(struct ixgbe_ring *rx_ring,
+					     union ixgbe_adv_rx_desc *rx_desc)
+{
+	struct ixgbe_rx_buffer *rx_buffer;
+	struct sk_buff *skb;
+	struct page *page;
+
+	rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
+	page = rx_buffer->page;
+	prefetchw(page);
+
+	skb = rx_buffer->skb;
+
+	if (likely(!skb)) {
+		void *page_addr = page_address(page) +
+				  rx_buffer->page_offset;
+
+		/* prefetch first cache line of first page */
+		prefetch(page_addr);
+#if L1_CACHE_BYTES < 128
+		prefetch(page_addr + L1_CACHE_BYTES);
+#endif
+
+		/* allocate a skb to store the frags */
+		skb = napi_alloc_skb(&rx_ring->q_vector->napi,
+				     IXGBE_RX_HDR_SIZE);
+		if (unlikely(!skb)) {
+			rx_ring->rx_stats.alloc_rx_buff_failed++;
+			return NULL;
+		}
+
+		/*
+		 * we will be copying header into skb->data in
+		 * pskb_may_pull so it is in our interest to prefetch
+		 * it now to avoid a possible cache miss
+		 */
+		prefetchw(skb->data);
+
+		/*
+		 * Delay unmapping of the first packet. It carries the
+		 * header information, HW may still access the header
+		 * after the writeback.  Only unmap it when EOP is
+		 * reached
+		 */
+		if (likely(ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP)))
+			goto dma_sync;
+
+		IXGBE_CB(skb)->dma = rx_buffer->dma;
+	} else {
+		if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP))
+			ixgbe_dma_sync_frag(rx_ring, skb);
+
+dma_sync:
+		/* we are reusing so sync this buffer for CPU use */
+		dma_sync_single_range_for_cpu(rx_ring->dev,
+					      rx_buffer->dma,
+					      rx_buffer->page_offset,
+					      ixgbe_rx_bufsz(rx_ring),
+					      DMA_FROM_DEVICE);
+
+		rx_buffer->skb = NULL;
+	}
+
+	/* pull page into skb */
+	if (ixgbe_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
+		/* hand second half of page back to the ring */
+		ixgbe_reuse_rx_page(rx_ring, rx_buffer);
+	} else if (IXGBE_CB(skb)->dma == rx_buffer->dma) {
+		/* the page has been released from the ring */
+		IXGBE_CB(skb)->page_released = true;
+	} else {
+		/* we are not reusing the buffer so unmap it */
+		dma_unmap_page(rx_ring->dev, rx_buffer->dma,
+			       ixgbe_rx_pg_size(rx_ring),
+			       DMA_FROM_DEVICE);
+	}
+
+	/* clear contents of buffer_info */
+	rx_buffer->page = NULL;
+
+	return skb;
+}
+
+/**
+ * ixgbe_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf
+ * @q_vector: structure containing interrupt and ring information
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @budget: Total limit on number of packets to process
+ *
+ * This function provides a "bounce buffer" approach to Rx interrupt
+ * processing.  The advantage to this is that on systems that have
+ * expensive overhead for IOMMU access this provides a means of avoiding
+ * it by maintaining the mapping of the page to the syste.
+ *
+ * Returns amount of work completed
+ **/
+static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
+			       struct ixgbe_ring *rx_ring,
+			       const int budget)
+{
+	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+#ifdef IXGBE_FCOE
+	struct ixgbe_adapter *adapter = q_vector->adapter;
+	int ddp_bytes;
+	unsigned int mss = 0;
+#endif /* IXGBE_FCOE */
+	u16 cleaned_count = ixgbe_desc_unused(rx_ring);
+
+	while (likely(total_rx_packets < budget)) {
+		union ixgbe_adv_rx_desc *rx_desc;
+		struct sk_buff *skb;
+
+		/* return some buffers to hardware, one at a time is too slow */
+		if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) {
+			ixgbe_alloc_rx_buffers(rx_ring, cleaned_count);
+			cleaned_count = 0;
+		}
+
+		rx_desc = IXGBE_RX_DESC(rx_ring, rx_ring->next_to_clean);
+
+		if (!rx_desc->wb.upper.status_error)
+			break;
+
+		/* This memory barrier is needed to keep us from reading
+		 * any other fields out of the rx_desc until we know the
+		 * descriptor has been written back
+		 */
+		dma_rmb();
+
+		/* retrieve a buffer from the ring */
+		skb = ixgbe_fetch_rx_buffer(rx_ring, rx_desc);
+
+		/* exit if we failed to retrieve a buffer */
+		if (!skb)
+			break;
+
+		cleaned_count++;
+
+		/* place incomplete frames back on ring for completion */
+		if (ixgbe_is_non_eop(rx_ring, rx_desc, skb))
+			continue;
+
+		/* verify the packet layout is correct */
+		if (ixgbe_cleanup_headers(rx_ring, rx_desc, skb))
+			continue;
+
+		/* probably a little skewed due to removing CRC */
+		total_rx_bytes += skb->len;
+
+		/* populate checksum, timestamp, VLAN, and protocol */
+		ixgbe_process_skb_fields(rx_ring, rx_desc, skb);
+
+#ifdef IXGBE_FCOE
+		/* if ddp, not passing to ULD unless for FCP_RSP or error */
+		if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) {
+			ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb);
+			/* include DDPed FCoE data */
+			if (ddp_bytes > 0) {
+				if (!mss) {
+					mss = rx_ring->netdev->mtu -
+						sizeof(struct fcoe_hdr) -
+						sizeof(struct fc_frame_header) -
+						sizeof(struct fcoe_crc_eof);
+					if (mss > 512)
+						mss &= ~511;
+				}
+				total_rx_bytes += ddp_bytes;
+				total_rx_packets += DIV_ROUND_UP(ddp_bytes,
+								 mss);
+			}
+			if (!ddp_bytes) {
+				dev_kfree_skb_any(skb);
+				continue;
+			}
+		}
+
+#endif /* IXGBE_FCOE */
+		skb_mark_napi_id(skb, &q_vector->napi);
+		ixgbe_rx_skb(q_vector, skb);
+
+		/* update budget accounting */
+		total_rx_packets++;
+	}
+
+	u64_stats_update_begin(&rx_ring->syncp);
+	rx_ring->stats.packets += total_rx_packets;
+	rx_ring->stats.bytes += total_rx_bytes;
+	u64_stats_update_end(&rx_ring->syncp);
+	q_vector->rx.total_packets += total_rx_packets;
+	q_vector->rx.total_bytes += total_rx_bytes;
+
+	return total_rx_packets;
+}
+
+#ifdef CONFIG_NET_RX_BUSY_POLL
+/* must be called with local_bh_disable()d */
+static int ixgbe_low_latency_recv(struct napi_struct *napi)
+{
+	struct ixgbe_q_vector *q_vector =
+			container_of(napi, struct ixgbe_q_vector, napi);
+	struct ixgbe_adapter *adapter = q_vector->adapter;
+	struct ixgbe_ring  *ring;
+	int found = 0;
+
+	if (test_bit(__IXGBE_DOWN, &adapter->state))
+		return LL_FLUSH_FAILED;
+
+	if (!ixgbe_qv_lock_poll(q_vector))
+		return LL_FLUSH_BUSY;
+
+	ixgbe_for_each_ring(ring, q_vector->rx) {
+		found = ixgbe_clean_rx_irq(q_vector, ring, 4);
+#ifdef BP_EXTENDED_STATS
+		if (found)
+			ring->stats.cleaned += found;
+		else
+			ring->stats.misses++;
+#endif
+		if (found)
+			break;
+	}
+
+	ixgbe_qv_unlock_poll(q_vector);
+
+	return found;
+}
+#endif	/* CONFIG_NET_RX_BUSY_POLL */
+
+/**
+ * ixgbe_configure_msix - Configure MSI-X hardware
+ * @adapter: board private structure
+ *
+ * ixgbe_configure_msix sets up the hardware to properly generate MSI-X
+ * interrupts.
+ **/
+static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_q_vector *q_vector;
+	int v_idx;
+	u32 mask;
+
+	/* Populate MSIX to EITR Select */
+	if (adapter->num_vfs > 32) {
+		u32 eitrsel = (1 << (adapter->num_vfs - 32)) - 1;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, eitrsel);
+	}
+
+	/*
+	 * Populate the IVAR table and set the ITR values to the
+	 * corresponding register.
+	 */
+	for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
+		struct ixgbe_ring *ring;
+		q_vector = adapter->q_vector[v_idx];
+
+		ixgbe_for_each_ring(ring, q_vector->rx)
+			ixgbe_set_ivar(adapter, 0, ring->reg_idx, v_idx);
+
+		ixgbe_for_each_ring(ring, q_vector->tx)
+			ixgbe_set_ivar(adapter, 1, ring->reg_idx, v_idx);
+
+		ixgbe_write_eitr(q_vector);
+	}
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
+		ixgbe_set_ivar(adapter, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX,
+			       v_idx);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		ixgbe_set_ivar(adapter, -1, 1, v_idx);
+		break;
+	default:
+		break;
+	}
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950);
+
+	/* set up to autoclear timer, and the vectors */
+	mask = IXGBE_EIMS_ENABLE_MASK;
+	mask &= ~(IXGBE_EIMS_OTHER |
+		  IXGBE_EIMS_MAILBOX |
+		  IXGBE_EIMS_LSC);
+
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask);
+}
+
+enum latency_range {
+	lowest_latency = 0,
+	low_latency = 1,
+	bulk_latency = 2,
+	latency_invalid = 255
+};
+
+/**
+ * ixgbe_update_itr - update the dynamic ITR value based on statistics
+ * @q_vector: structure containing interrupt and ring information
+ * @ring_container: structure containing ring performance data
+ *
+ *      Stores a new ITR value based on packets and byte
+ *      counts during the last interrupt.  The advantage of per interrupt
+ *      computation is faster updates and more accurate ITR for the current
+ *      traffic pattern.  Constants in this function were computed
+ *      based on theoretical maximum wire speed and thresholds were set based
+ *      on testing data as well as attempting to minimize response time
+ *      while increasing bulk throughput.
+ *      this functionality is controlled by the InterruptThrottleRate module
+ *      parameter (see ixgbe_param.c)
+ **/
+static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector,
+			     struct ixgbe_ring_container *ring_container)
+{
+	int bytes = ring_container->total_bytes;
+	int packets = ring_container->total_packets;
+	u32 timepassed_us;
+	u64 bytes_perint;
+	u8 itr_setting = ring_container->itr;
+
+	if (packets == 0)
+		return;
+
+	/* simple throttlerate management
+	 *   0-10MB/s   lowest (100000 ints/s)
+	 *  10-20MB/s   low    (20000 ints/s)
+	 *  20-1249MB/s bulk   (8000 ints/s)
+	 */
+	/* what was last interrupt timeslice? */
+	timepassed_us = q_vector->itr >> 2;
+	if (timepassed_us == 0)
+		return;
+
+	bytes_perint = bytes / timepassed_us; /* bytes/usec */
+
+	switch (itr_setting) {
+	case lowest_latency:
+		if (bytes_perint > 10)
+			itr_setting = low_latency;
+		break;
+	case low_latency:
+		if (bytes_perint > 20)
+			itr_setting = bulk_latency;
+		else if (bytes_perint <= 10)
+			itr_setting = lowest_latency;
+		break;
+	case bulk_latency:
+		if (bytes_perint <= 20)
+			itr_setting = low_latency;
+		break;
+	}
+
+	/* clear work counters since we have the values we need */
+	ring_container->total_bytes = 0;
+	ring_container->total_packets = 0;
+
+	/* write updated itr to ring container */
+	ring_container->itr = itr_setting;
+}
+
+/**
+ * ixgbe_write_eitr - write EITR register in hardware specific way
+ * @q_vector: structure containing interrupt and ring information
+ *
+ * This function is made to be called by ethtool and by the driver
+ * when it needs to update EITR registers at runtime.  Hardware
+ * specific quirks/differences are taken care of here.
+ */
+void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
+{
+	struct ixgbe_adapter *adapter = q_vector->adapter;
+	struct ixgbe_hw *hw = &adapter->hw;
+	int v_idx = q_vector->v_idx;
+	u32 itr_reg = q_vector->itr & IXGBE_MAX_EITR;
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
+		/* must write high and low 16 bits to reset counter */
+		itr_reg |= (itr_reg << 16);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		/*
+		 * set the WDIS bit to not clear the timer bits and cause an
+		 * immediate assertion of the interrupt
+		 */
+		itr_reg |= IXGBE_EITR_CNT_WDIS;
+		break;
+	default:
+		break;
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg);
+}
+
+static void ixgbe_set_itr(struct ixgbe_q_vector *q_vector)
+{
+	u32 new_itr = q_vector->itr;
+	u8 current_itr;
+
+	ixgbe_update_itr(q_vector, &q_vector->tx);
+	ixgbe_update_itr(q_vector, &q_vector->rx);
+
+	current_itr = max(q_vector->rx.itr, q_vector->tx.itr);
+
+	switch (current_itr) {
+	/* counts and packets in update_itr are dependent on these numbers */
+	case lowest_latency:
+		new_itr = IXGBE_100K_ITR;
+		break;
+	case low_latency:
+		new_itr = IXGBE_20K_ITR;
+		break;
+	case bulk_latency:
+		new_itr = IXGBE_8K_ITR;
+		break;
+	default:
+		break;
+	}
+
+	if (new_itr != q_vector->itr) {
+		/* do an exponential smoothing */
+		new_itr = (10 * new_itr * q_vector->itr) /
+			  ((9 * new_itr) + q_vector->itr);
+
+		/* save the algorithm value here */
+		q_vector->itr = new_itr;
+
+		ixgbe_write_eitr(q_vector);
+	}
+}
+
+/**
+ * ixgbe_check_overtemp_subtask - check for over temperature
+ * @adapter: pointer to adapter
+ **/
+static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 eicr = adapter->interrupt_event;
+
+	if (test_bit(__IXGBE_DOWN, &adapter->state))
+		return;
+
+	if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
+	    !(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_EVENT))
+		return;
+
+	adapter->flags2 &= ~IXGBE_FLAG2_TEMP_SENSOR_EVENT;
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82599_T3_LOM:
+		/*
+		 * Since the warning interrupt is for both ports
+		 * we don't have to check if:
+		 *  - This interrupt wasn't for our port.
+		 *  - We may have missed the interrupt so always have to
+		 *    check if we  got a LSC
+		 */
+		if (!(eicr & IXGBE_EICR_GPI_SDP0) &&
+		    !(eicr & IXGBE_EICR_LSC))
+			return;
+
+		if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) {
+			u32 speed;
+			bool link_up = false;
+
+			hw->mac.ops.check_link(hw, &speed, &link_up, false);
+
+			if (link_up)
+				return;
+		}
+
+		/* Check if this is not due to overtemp */
+		if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP)
+			return;
+
+		break;
+	default:
+		if (!(eicr & IXGBE_EICR_GPI_SDP0))
+			return;
+		break;
+	}
+	e_crit(drv,
+	       "Network adapter has been stopped because it has over heated. "
+	       "Restart the computer. If the problem persists, "
+	       "power off the system and replace the adapter\n");
+
+	adapter->interrupt_event = 0;
+}
+
+static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
+	    (eicr & IXGBE_EICR_GPI_SDP1)) {
+		e_crit(probe, "Fan has stopped, replace the adapter\n");
+		/* write to clear the interrupt */
+		IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
+	}
+}
+
+static void ixgbe_check_overtemp_event(struct ixgbe_adapter *adapter, u32 eicr)
+{
+	if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE))
+		return;
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+		/*
+		 * Need to check link state so complete overtemp check
+		 * on service task
+		 */
+		if (((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC)) &&
+		    (!test_bit(__IXGBE_DOWN, &adapter->state))) {
+			adapter->interrupt_event = eicr;
+			adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
+			ixgbe_service_event_schedule(adapter);
+			return;
+		}
+		return;
+	case ixgbe_mac_X540:
+		if (!(eicr & IXGBE_EICR_TS))
+			return;
+		break;
+	default:
+		return;
+	}
+
+	e_crit(drv,
+	       "Network adapter has been stopped because it has over heated. "
+	       "Restart the computer. If the problem persists, "
+	       "power off the system and replace the adapter\n");
+}
+
+static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if (eicr & IXGBE_EICR_GPI_SDP2) {
+		/* Clear the interrupt */
+		IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2);
+		if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+			adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
+			ixgbe_service_event_schedule(adapter);
+		}
+	}
+
+	if (eicr & IXGBE_EICR_GPI_SDP1) {
+		/* Clear the interrupt */
+		IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
+		if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+			adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+			ixgbe_service_event_schedule(adapter);
+		}
+	}
+}
+
+static void ixgbe_check_lsc(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	adapter->lsc_int++;
+	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
+	adapter->link_check_timeout = jiffies;
+	if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+		IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC);
+		IXGBE_WRITE_FLUSH(hw);
+		ixgbe_service_event_schedule(adapter);
+	}
+}
+
+static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter,
+					   u64 qmask)
+{
+	u32 mask;
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		mask = (qmask & 0xFFFFFFFF);
+		if (mask)
+			IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask);
+		mask = (qmask >> 32);
+		if (mask)
+			IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask);
+		break;
+	default:
+		break;
+	}
+	/* skip the flush */
+}
+
+static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter,
+					    u64 qmask)
+{
+	u32 mask;
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+		IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		mask = (qmask & 0xFFFFFFFF);
+		if (mask)
+			IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask);
+		mask = (qmask >> 32);
+		if (mask)
+			IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask);
+		break;
+	default:
+		break;
+	}
+	/* skip the flush */
+}
+
+/**
+ * ixgbe_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues,
+				    bool flush)
+{
+	u32 mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
+
+	/* don't reenable LSC while waiting for link */
+	if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)
+		mask &= ~IXGBE_EIMS_LSC;
+
+	if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
+		switch (adapter->hw.mac.type) {
+		case ixgbe_mac_82599EB:
+			mask |= IXGBE_EIMS_GPI_SDP0;
+			break;
+		case ixgbe_mac_X540:
+		case ixgbe_mac_X550:
+		case ixgbe_mac_X550EM_x:
+			mask |= IXGBE_EIMS_TS;
+			break;
+		default:
+			break;
+		}
+	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
+		mask |= IXGBE_EIMS_GPI_SDP1;
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+		mask |= IXGBE_EIMS_GPI_SDP1;
+		mask |= IXGBE_EIMS_GPI_SDP2;
+		/* fall through */
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		mask |= IXGBE_EIMS_ECC;
+		mask |= IXGBE_EIMS_MAILBOX;
+		break;
+	default:
+		break;
+	}
+
+	if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) &&
+	    !(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT))
+		mask |= IXGBE_EIMS_FLOW_DIR;
+
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
+	if (queues)
+		ixgbe_irq_enable_queues(adapter, ~0);
+	if (flush)
+		IXGBE_WRITE_FLUSH(&adapter->hw);
+}
+
+static irqreturn_t ixgbe_msix_other(int irq, void *data)
+{
+	struct ixgbe_adapter *adapter = data;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 eicr;
+
+	/*
+	 * Workaround for Silicon errata.  Use clear-by-write instead
+	 * of clear-by-read.  Reading with EICS will return the
+	 * interrupt causes without clearing, which later be done
+	 * with the write to EICR.
+	 */
+	eicr = IXGBE_READ_REG(hw, IXGBE_EICS);
+
+	/* The lower 16bits of the EICR register are for the queue interrupts
+	 * which should be masked here in order to not accidentally clear them if
+	 * the bits are high when ixgbe_msix_other is called. There is a race
+	 * condition otherwise which results in possible performance loss
+	 * especially if the ixgbe_msix_other interrupt is triggering
+	 * consistently (as it would when PPS is turned on for the X540 device)
+	 */
+	eicr &= 0xFFFF0000;
+
+	IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr);
+
+	if (eicr & IXGBE_EICR_LSC)
+		ixgbe_check_lsc(adapter);
+
+	if (eicr & IXGBE_EICR_MAILBOX)
+		ixgbe_msg_task(adapter);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		if (eicr & IXGBE_EICR_ECC) {
+			e_info(link, "Received ECC Err, initiating reset\n");
+			adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+			ixgbe_service_event_schedule(adapter);
+			IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC);
+		}
+		/* Handle Flow Director Full threshold interrupt */
+		if (eicr & IXGBE_EICR_FLOW_DIR) {
+			int reinit_count = 0;
+			int i;
+			for (i = 0; i < adapter->num_tx_queues; i++) {
+				struct ixgbe_ring *ring = adapter->tx_ring[i];
+				if (test_and_clear_bit(__IXGBE_TX_FDIR_INIT_DONE,
+						       &ring->state))
+					reinit_count++;
+			}
+			if (reinit_count) {
+				/* no more flow director interrupts until after init */
+				IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_FLOW_DIR);
+				adapter->flags2 |= IXGBE_FLAG2_FDIR_REQUIRES_REINIT;
+				ixgbe_service_event_schedule(adapter);
+			}
+		}
+		ixgbe_check_sfp_event(adapter, eicr);
+		ixgbe_check_overtemp_event(adapter, eicr);
+		break;
+	default:
+		break;
+	}
+
+	ixgbe_check_fan_failure(adapter, eicr);
+
+	if (unlikely(eicr & IXGBE_EICR_TIMESYNC))
+		ixgbe_ptp_check_pps_event(adapter, eicr);
+
+	/* re-enable the original interrupt state, no lsc, no queues */
+	if (!test_bit(__IXGBE_DOWN, &adapter->state))
+		ixgbe_irq_enable(adapter, false, false);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ixgbe_msix_clean_rings(int irq, void *data)
+{
+	struct ixgbe_q_vector *q_vector = data;
+
+	/* EIAM disabled interrupts (on this vector) for us */
+
+	if (q_vector->rx.ring || q_vector->tx.ring)
+		napi_schedule(&q_vector->napi);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ixgbe_poll - NAPI Rx polling callback
+ * @napi: structure for representing this polling device
+ * @budget: how many packets driver is allowed to clean
+ *
+ * This function is used for legacy and MSI, NAPI mode
+ **/
+int ixgbe_poll(struct napi_struct *napi, int budget)
+{
+	struct ixgbe_q_vector *q_vector =
+				container_of(napi, struct ixgbe_q_vector, napi);
+	struct ixgbe_adapter *adapter = q_vector->adapter;
+	struct ixgbe_ring *ring;
+	int per_ring_budget;
+	bool clean_complete = true;
+
+#ifdef CONFIG_IXGBE_DCA
+	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+		ixgbe_update_dca(q_vector);
+#endif
+
+	ixgbe_for_each_ring(ring, q_vector->tx)
+		clean_complete &= !!ixgbe_clean_tx_irq(q_vector, ring);
+
+	if (!ixgbe_qv_lock_napi(q_vector))
+		return budget;
+
+	/* attempt to distribute budget to each queue fairly, but don't allow
+	 * the budget to go below 1 because we'll exit polling */
+	if (q_vector->rx.count > 1)
+		per_ring_budget = max(budget/q_vector->rx.count, 1);
+	else
+		per_ring_budget = budget;
+
+	ixgbe_for_each_ring(ring, q_vector->rx)
+		clean_complete &= (ixgbe_clean_rx_irq(q_vector, ring,
+				   per_ring_budget) < per_ring_budget);
+
+	ixgbe_qv_unlock_napi(q_vector);
+	/* If all work not completed, return budget and keep polling */
+	if (!clean_complete)
+		return budget;
+
+	/* all work done, exit the polling mode */
+	napi_complete(napi);
+	if (adapter->rx_itr_setting & 1)
+		ixgbe_set_itr(q_vector);
+	if (!test_bit(__IXGBE_DOWN, &adapter->state))
+		ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));
+
+	return 0;
+}
+
+/**
+ * ixgbe_request_msix_irqs - Initialize MSI-X interrupts
+ * @adapter: board private structure
+ *
+ * ixgbe_request_msix_irqs allocates MSI-X vectors and requests
+ * interrupts from the kernel.
+ **/
+static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int vector, err;
+	int ri = 0, ti = 0;
+
+	for (vector = 0; vector < adapter->num_q_vectors; vector++) {
+		struct ixgbe_q_vector *q_vector = adapter->q_vector[vector];
+		struct msix_entry *entry = &adapter->msix_entries[vector];
+
+		if (q_vector->tx.ring && q_vector->rx.ring) {
+			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+				 "%s-%s-%d", netdev->name, "TxRx", ri++);
+			ti++;
+		} else if (q_vector->rx.ring) {
+			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+				 "%s-%s-%d", netdev->name, "rx", ri++);
+		} else if (q_vector->tx.ring) {
+			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+				 "%s-%s-%d", netdev->name, "tx", ti++);
+		} else {
+			/* skip this unused q_vector */
+			continue;
+		}
+		err = request_irq(entry->vector, &ixgbe_msix_clean_rings, 0,
+				  q_vector->name, q_vector);
+		if (err) {
+			e_err(probe, "request_irq failed for MSIX interrupt "
+			      "Error: %d\n", err);
+			goto free_queue_irqs;
+		}
+		/* If Flow Director is enabled, set interrupt affinity */
+		if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+			/* assign the mask for this irq */
+			irq_set_affinity_hint(entry->vector,
+					      &q_vector->affinity_mask);
+		}
+	}
+
+	err = request_irq(adapter->msix_entries[vector].vector,
+			  ixgbe_msix_other, 0, netdev->name, adapter);
+	if (err) {
+		e_err(probe, "request_irq for msix_other failed: %d\n", err);
+		goto free_queue_irqs;
+	}
+
+	return 0;
+
+free_queue_irqs:
+	while (vector) {
+		vector--;
+		irq_set_affinity_hint(adapter->msix_entries[vector].vector,
+				      NULL);
+		free_irq(adapter->msix_entries[vector].vector,
+			 adapter->q_vector[vector]);
+	}
+	adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
+	pci_disable_msix(adapter->pdev);
+	kfree(adapter->msix_entries);
+	adapter->msix_entries = NULL;
+	return err;
+}
+
+/**
+ * ixgbe_intr - legacy mode Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t ixgbe_intr(int irq, void *data)
+{
+	struct ixgbe_adapter *adapter = data;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
+	u32 eicr;
+
+	/*
+	 * Workaround for silicon errata #26 on 82598.  Mask the interrupt
+	 * before the read of EICR.
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
+
+	/* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read
+	 * therefore no explicit interrupt disable is necessary */
+	eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
+	if (!eicr) {
+		/*
+		 * shared interrupt alert!
+		 * make sure interrupts are enabled because the read will
+		 * have disabled interrupts due to EIAM
+		 * finish the workaround of silicon errata on 82598.  Unmask
+		 * the interrupt that we masked before the EICR read.
+		 */
+		if (!test_bit(__IXGBE_DOWN, &adapter->state))
+			ixgbe_irq_enable(adapter, true, true);
+		return IRQ_NONE;	/* Not our interrupt */
+	}
+
+	if (eicr & IXGBE_EICR_LSC)
+		ixgbe_check_lsc(adapter);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+		ixgbe_check_sfp_event(adapter, eicr);
+		/* Fall through */
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		if (eicr & IXGBE_EICR_ECC) {
+			e_info(link, "Received ECC Err, initiating reset\n");
+			adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+			ixgbe_service_event_schedule(adapter);
+			IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC);
+		}
+		ixgbe_check_overtemp_event(adapter, eicr);
+		break;
+	default:
+		break;
+	}
+
+	ixgbe_check_fan_failure(adapter, eicr);
+	if (unlikely(eicr & IXGBE_EICR_TIMESYNC))
+		ixgbe_ptp_check_pps_event(adapter, eicr);
+
+	/* would disable interrupts here but EIAM disabled it */
+	napi_schedule(&q_vector->napi);
+
+	/*
+	 * re-enable link(maybe) and non-queue interrupts, no flush.
+	 * ixgbe_poll will re-enable the queue interrupts
+	 */
+	if (!test_bit(__IXGBE_DOWN, &adapter->state))
+		ixgbe_irq_enable(adapter, false, false);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ixgbe_request_irq - initialize interrupts
+ * @adapter: board private structure
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int ixgbe_request_irq(struct ixgbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int err;
+
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+		err = ixgbe_request_msix_irqs(adapter);
+	else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED)
+		err = request_irq(adapter->pdev->irq, ixgbe_intr, 0,
+				  netdev->name, adapter);
+	else
+		err = request_irq(adapter->pdev->irq, ixgbe_intr, IRQF_SHARED,
+				  netdev->name, adapter);
+
+	if (err)
+		e_err(probe, "request_irq failed, Error %d\n", err);
+
+	return err;
+}
+
+static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
+{
+	int vector;
+
+	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
+		free_irq(adapter->pdev->irq, adapter);
+		return;
+	}
+
+	for (vector = 0; vector < adapter->num_q_vectors; vector++) {
+		struct ixgbe_q_vector *q_vector = adapter->q_vector[vector];
+		struct msix_entry *entry = &adapter->msix_entries[vector];
+
+		/* free only the irqs that were actually requested */
+		if (!q_vector->rx.ring && !q_vector->tx.ring)
+			continue;
+
+		/* clear the affinity_mask in the IRQ descriptor */
+		irq_set_affinity_hint(entry->vector, NULL);
+
+		free_irq(entry->vector, q_vector);
+	}
+
+	free_irq(adapter->msix_entries[vector++].vector, adapter);
+}
+
+/**
+ * ixgbe_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
+{
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
+		break;
+	default:
+		break;
+	}
+	IXGBE_WRITE_FLUSH(&adapter->hw);
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+		int vector;
+
+		for (vector = 0; vector < adapter->num_q_vectors; vector++)
+			synchronize_irq(adapter->msix_entries[vector].vector);
+
+		synchronize_irq(adapter->msix_entries[vector++].vector);
+	} else {
+		synchronize_irq(adapter->pdev->irq);
+	}
+}
+
+/**
+ * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
+ *
+ **/
+static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
+
+	ixgbe_write_eitr(q_vector);
+
+	ixgbe_set_ivar(adapter, 0, 0, 0);
+	ixgbe_set_ivar(adapter, 1, 0, 0);
+
+	e_info(hw, "Legacy interrupt IVAR setup done\n");
+}
+
+/**
+ * ixgbe_configure_tx_ring - Configure 8259x Tx ring after Reset
+ * @adapter: board private structure
+ * @ring: structure containing ring specific data
+ *
+ * Configure the Tx descriptor ring after a reset.
+ **/
+void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter,
+			     struct ixgbe_ring *ring)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u64 tdba = ring->dma;
+	int wait_loop = 10;
+	u32 txdctl = IXGBE_TXDCTL_ENABLE;
+	u8 reg_idx = ring->reg_idx;
+
+	/* disable queue to avoid issues while updating state */
+	IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), 0);
+	IXGBE_WRITE_FLUSH(hw);
+
+	IXGBE_WRITE_REG(hw, IXGBE_TDBAL(reg_idx),
+			(tdba & DMA_BIT_MASK(32)));
+	IXGBE_WRITE_REG(hw, IXGBE_TDBAH(reg_idx), (tdba >> 32));
+	IXGBE_WRITE_REG(hw, IXGBE_TDLEN(reg_idx),
+			ring->count * sizeof(union ixgbe_adv_tx_desc));
+	IXGBE_WRITE_REG(hw, IXGBE_TDH(reg_idx), 0);
+	IXGBE_WRITE_REG(hw, IXGBE_TDT(reg_idx), 0);
+	ring->tail = adapter->io_addr + IXGBE_TDT(reg_idx);
+
+	/*
+	 * set WTHRESH to encourage burst writeback, it should not be set
+	 * higher than 1 when:
+	 * - ITR is 0 as it could cause false TX hangs
+	 * - ITR is set to > 100k int/sec and BQL is enabled
+	 *
+	 * In order to avoid issues WTHRESH + PTHRESH should always be equal
+	 * to or less than the number of on chip descriptors, which is
+	 * currently 40.
+	 */
+	if (!ring->q_vector || (ring->q_vector->itr < IXGBE_100K_ITR))
+		txdctl |= (1 << 16);	/* WTHRESH = 1 */
+	else
+		txdctl |= (8 << 16);	/* WTHRESH = 8 */
+
+	/*
+	 * Setting PTHRESH to 32 both improves performance
+	 * and avoids a TX hang with DFP enabled
+	 */
+	txdctl |= (1 << 8) |	/* HTHRESH = 1 */
+		   32;		/* PTHRESH = 32 */
+
+	/* reinitialize flowdirector state */
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+		ring->atr_sample_rate = adapter->atr_sample_rate;
+		ring->atr_count = 0;
+		set_bit(__IXGBE_TX_FDIR_INIT_DONE, &ring->state);
+	} else {
+		ring->atr_sample_rate = 0;
+	}
+
+	/* initialize XPS */
+	if (!test_and_set_bit(__IXGBE_TX_XPS_INIT_DONE, &ring->state)) {
+		struct ixgbe_q_vector *q_vector = ring->q_vector;
+
+		if (q_vector)
+			netif_set_xps_queue(ring->netdev,
+					    &q_vector->affinity_mask,
+					    ring->queue_index);
+	}
+
+	clear_bit(__IXGBE_HANG_CHECK_ARMED, &ring->state);
+
+	/* enable queue */
+	IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), txdctl);
+
+	/* TXDCTL.EN will return 0 on 82598 if link is down, so skip it */
+	if (hw->mac.type == ixgbe_mac_82598EB &&
+	    !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP))
+		return;
+
+	/* poll to verify queue is enabled */
+	do {
+		usleep_range(1000, 2000);
+		txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx));
+	} while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE));
+	if (!wait_loop)
+		e_err(drv, "Could not enable Tx Queue %d\n", reg_idx);
+}
+
+static void ixgbe_setup_mtqc(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 rttdcs, mtqc;
+	u8 tcs = netdev_get_num_tc(adapter->netdev);
+
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return;
+
+	/* disable the arbiter while setting MTQC */
+	rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+	rttdcs |= IXGBE_RTTDCS_ARBDIS;
+	IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
+
+	/* set transmit pool layout */
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+		mtqc = IXGBE_MTQC_VT_ENA;
+		if (tcs > 4)
+			mtqc |= IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ;
+		else if (tcs > 1)
+			mtqc |= IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ;
+		else if (adapter->ring_feature[RING_F_RSS].indices == 4)
+			mtqc |= IXGBE_MTQC_32VF;
+		else
+			mtqc |= IXGBE_MTQC_64VF;
+	} else {
+		if (tcs > 4)
+			mtqc = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ;
+		else if (tcs > 1)
+			mtqc = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ;
+		else
+			mtqc = IXGBE_MTQC_64Q_1PB;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_MTQC, mtqc);
+
+	/* Enable Security TX Buffer IFG for multiple pb */
+	if (tcs) {
+		u32 sectx = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
+		sectx |= IXGBE_SECTX_DCB;
+		IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, sectx);
+	}
+
+	/* re-enable the arbiter */
+	rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
+	IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
+}
+
+/**
+ * ixgbe_configure_tx - Configure 8259x Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 dmatxctl;
+	u32 i;
+
+	ixgbe_setup_mtqc(adapter);
+
+	if (hw->mac.type != ixgbe_mac_82598EB) {
+		/* DMATXCTL.EN must be before Tx queues are enabled */
+		dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+		dmatxctl |= IXGBE_DMATXCTL_TE;
+		IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl);
+	}
+
+	/* Setup the HW Tx Head and Tail descriptor pointers */
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		ixgbe_configure_tx_ring(adapter, adapter->tx_ring[i]);
+}
+
+static void ixgbe_enable_rx_drop(struct ixgbe_adapter *adapter,
+				 struct ixgbe_ring *ring)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u8 reg_idx = ring->reg_idx;
+	u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(reg_idx));
+
+	srrctl |= IXGBE_SRRCTL_DROP_EN;
+
+	IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl);
+}
+
+static void ixgbe_disable_rx_drop(struct ixgbe_adapter *adapter,
+				  struct ixgbe_ring *ring)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u8 reg_idx = ring->reg_idx;
+	u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(reg_idx));
+
+	srrctl &= ~IXGBE_SRRCTL_DROP_EN;
+
+	IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl);
+}
+
+#ifdef CONFIG_IXGBE_DCB
+void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter)
+#else
+static void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter)
+#endif
+{
+	int i;
+	bool pfc_en = adapter->dcb_cfg.pfc_mode_enable;
+
+	if (adapter->ixgbe_ieee_pfc)
+		pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en);
+
+	/*
+	 * We should set the drop enable bit if:
+	 *  SR-IOV is enabled
+	 *   or
+	 *  Number of Rx queues > 1 and flow control is disabled
+	 *
+	 *  This allows us to avoid head of line blocking for security
+	 *  and performance reasons.
+	 */
+	if (adapter->num_vfs || (adapter->num_rx_queues > 1 &&
+	    !(adapter->hw.fc.current_mode & ixgbe_fc_tx_pause) && !pfc_en)) {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			ixgbe_enable_rx_drop(adapter, adapter->rx_ring[i]);
+	} else {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			ixgbe_disable_rx_drop(adapter, adapter->rx_ring[i]);
+	}
+}
+
+#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
+
+static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
+				   struct ixgbe_ring *rx_ring)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 srrctl;
+	u8 reg_idx = rx_ring->reg_idx;
+
+	if (hw->mac.type == ixgbe_mac_82598EB) {
+		u16 mask = adapter->ring_feature[RING_F_RSS].mask;
+
+		/*
+		 * if VMDq is not active we must program one srrctl register
+		 * per RSS queue since we have enabled RDRXCTL.MVMEN
+		 */
+		reg_idx &= mask;
+	}
+
+	/* configure header buffer length, needed for RSC */
+	srrctl = IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT;
+
+	/* configure the packet buffer length */
+	srrctl |= ixgbe_rx_bufsz(rx_ring) >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+
+	/* configure descriptor type */
+	srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
+
+	IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl);
+}
+
+/**
+ * Return a number of entries in the RSS indirection table
+ *
+ * @adapter: device handle
+ *
+ *  - 82598/82599/X540:     128
+ *  - X550(non-SRIOV mode): 512
+ *  - X550(SRIOV mode):     64
+ */
+u32 ixgbe_rss_indir_tbl_entries(struct ixgbe_adapter *adapter)
+{
+	if (adapter->hw.mac.type < ixgbe_mac_X550)
+		return 128;
+	else if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		return 64;
+	else
+		return 512;
+}
+
+/**
+ * Write the RETA table to HW
+ *
+ * @adapter: device handle
+ *
+ * Write the RSS redirection table stored in adapter.rss_indir_tbl[] to HW.
+ */
+static void ixgbe_store_reta(struct ixgbe_adapter *adapter)
+{
+	u32 i, reta_entries = ixgbe_rss_indir_tbl_entries(adapter);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 reta = 0;
+	u32 indices_multi;
+	u8 *indir_tbl = adapter->rss_indir_tbl;
+
+	/* Fill out the redirection table as follows:
+	 *  - 82598:      8 bit wide entries containing pair of 4 bit RSS
+	 *    indices.
+	 *  - 82599/X540: 8 bit wide entries containing 4 bit RSS index
+	 *  - X550:       8 bit wide entries containing 6 bit RSS index
+	 */
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+		indices_multi = 0x11;
+	else
+		indices_multi = 0x1;
+
+	/* Write redirection table to HW */
+	for (i = 0; i < reta_entries; i++) {
+		reta |= indices_multi * indir_tbl[i] << (i & 0x3) * 8;
+		if ((i & 3) == 3) {
+			if (i < 128)
+				IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta);
+			else
+				IXGBE_WRITE_REG(hw, IXGBE_ERETA((i >> 2) - 32),
+						reta);
+			reta = 0;
+		}
+	}
+}
+
+/**
+ * Write the RETA table to HW (for x550 devices in SRIOV mode)
+ *
+ * @adapter: device handle
+ *
+ * Write the RSS redirection table stored in adapter.rss_indir_tbl[] to HW.
+ */
+static void ixgbe_store_vfreta(struct ixgbe_adapter *adapter)
+{
+	u32 i, reta_entries = ixgbe_rss_indir_tbl_entries(adapter);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 vfreta = 0;
+	unsigned int pf_pool = adapter->num_vfs;
+
+	/* Write redirection table to HW */
+	for (i = 0; i < reta_entries; i++) {
+		vfreta |= (u32)adapter->rss_indir_tbl[i] << (i & 0x3) * 8;
+		if ((i & 3) == 3) {
+			IXGBE_WRITE_REG(hw, IXGBE_PFVFRETA(i >> 2, pf_pool),
+					vfreta);
+			vfreta = 0;
+		}
+	}
+}
+
+static void ixgbe_setup_reta(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 i, j;
+	u32 reta_entries = ixgbe_rss_indir_tbl_entries(adapter);
+	u16 rss_i = adapter->ring_feature[RING_F_RSS].indices;
+
+	/* Program table for at least 2 queues w/ SR-IOV so that VFs can
+	 * make full use of any rings they may have.  We will use the
+	 * PSRTYPE register to control how many rings we use within the PF.
+	 */
+	if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && (rss_i < 2))
+		rss_i = 2;
+
+	/* Fill out hash function seeds */
+	for (i = 0; i < 10; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), adapter->rss_key[i]);
+
+	/* Fill out redirection table */
+	memset(adapter->rss_indir_tbl, 0, sizeof(adapter->rss_indir_tbl));
+
+	for (i = 0, j = 0; i < reta_entries; i++, j++) {
+		if (j == rss_i)
+			j = 0;
+
+		adapter->rss_indir_tbl[i] = j;
+	}
+
+	ixgbe_store_reta(adapter);
+}
+
+static void ixgbe_setup_vfreta(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 rss_i = adapter->ring_feature[RING_F_RSS].indices;
+	unsigned int pf_pool = adapter->num_vfs;
+	int i, j;
+
+	/* Fill out hash function seeds */
+	for (i = 0; i < 10; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_PFVFRSSRK(i, pf_pool),
+				adapter->rss_key[i]);
+
+	/* Fill out the redirection table */
+	for (i = 0, j = 0; i < 64; i++, j++) {
+		if (j == rss_i)
+			j = 0;
+
+		adapter->rss_indir_tbl[i] = j;
+	}
+
+	ixgbe_store_vfreta(adapter);
+}
+
+static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 mrqc = 0, rss_field = 0, vfmrqc = 0;
+	u32 rxcsum;
+
+	/* Disable indicating checksum in descriptor, enables RSS hash */
+	rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
+	rxcsum |= IXGBE_RXCSUM_PCSD;
+	IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
+
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		if (adapter->ring_feature[RING_F_RSS].mask)
+			mrqc = IXGBE_MRQC_RSSEN;
+	} else {
+		u8 tcs = netdev_get_num_tc(adapter->netdev);
+
+		if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+			if (tcs > 4)
+				mrqc = IXGBE_MRQC_VMDQRT8TCEN;	/* 8 TCs */
+			else if (tcs > 1)
+				mrqc = IXGBE_MRQC_VMDQRT4TCEN;	/* 4 TCs */
+			else if (adapter->ring_feature[RING_F_RSS].indices == 4)
+				mrqc = IXGBE_MRQC_VMDQRSS32EN;
+			else
+				mrqc = IXGBE_MRQC_VMDQRSS64EN;
+		} else {
+			if (tcs > 4)
+				mrqc = IXGBE_MRQC_RTRSS8TCEN;
+			else if (tcs > 1)
+				mrqc = IXGBE_MRQC_RTRSS4TCEN;
+			else
+				mrqc = IXGBE_MRQC_RSSEN;
+		}
+	}
+
+	/* Perform hash on these packet types */
+	rss_field |= IXGBE_MRQC_RSS_FIELD_IPV4 |
+		     IXGBE_MRQC_RSS_FIELD_IPV4_TCP |
+		     IXGBE_MRQC_RSS_FIELD_IPV6 |
+		     IXGBE_MRQC_RSS_FIELD_IPV6_TCP;
+
+	if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV4_UDP)
+		rss_field |= IXGBE_MRQC_RSS_FIELD_IPV4_UDP;
+	if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV6_UDP)
+		rss_field |= IXGBE_MRQC_RSS_FIELD_IPV6_UDP;
+
+	netdev_rss_key_fill(adapter->rss_key, sizeof(adapter->rss_key));
+	if ((hw->mac.type >= ixgbe_mac_X550) &&
+	    (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) {
+		unsigned int pf_pool = adapter->num_vfs;
+
+		/* Enable VF RSS mode */
+		mrqc |= IXGBE_MRQC_MULTIPLE_RSS;
+		IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
+
+		/* Setup RSS through the VF registers */
+		ixgbe_setup_vfreta(adapter);
+		vfmrqc = IXGBE_MRQC_RSSEN;
+		vfmrqc |= rss_field;
+		IXGBE_WRITE_REG(hw, IXGBE_PFVFMRQC(pf_pool), vfmrqc);
+	} else {
+		ixgbe_setup_reta(adapter);
+		mrqc |= rss_field;
+		IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
+	}
+}
+
+/**
+ * ixgbe_configure_rscctl - enable RSC for the indicated ring
+ * @adapter:    address of board private structure
+ * @index:      index of ring to set
+ **/
+static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
+				   struct ixgbe_ring *ring)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 rscctrl;
+	u8 reg_idx = ring->reg_idx;
+
+	if (!ring_is_rsc_enabled(ring))
+		return;
+
+	rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(reg_idx));
+	rscctrl |= IXGBE_RSCCTL_RSCEN;
+	/*
+	 * we must limit the number of descriptors so that the
+	 * total size of max desc * buf_len is not greater
+	 * than 65536
+	 */
+	rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+	IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(reg_idx), rscctrl);
+}
+
+#define IXGBE_MAX_RX_DESC_POLL 10
+static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
+				       struct ixgbe_ring *ring)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int wait_loop = IXGBE_MAX_RX_DESC_POLL;
+	u32 rxdctl;
+	u8 reg_idx = ring->reg_idx;
+
+	if (ixgbe_removed(hw->hw_addr))
+		return;
+	/* RXDCTL.EN will return 0 on 82598 if link is down, so skip it */
+	if (hw->mac.type == ixgbe_mac_82598EB &&
+	    !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP))
+		return;
+
+	do {
+		usleep_range(1000, 2000);
+		rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
+	} while (--wait_loop && !(rxdctl & IXGBE_RXDCTL_ENABLE));
+
+	if (!wait_loop) {
+		e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within "
+		      "the polling period\n", reg_idx);
+	}
+}
+
+void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
+			    struct ixgbe_ring *ring)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int wait_loop = IXGBE_MAX_RX_DESC_POLL;
+	u32 rxdctl;
+	u8 reg_idx = ring->reg_idx;
+
+	if (ixgbe_removed(hw->hw_addr))
+		return;
+	rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
+	rxdctl &= ~IXGBE_RXDCTL_ENABLE;
+
+	/* write value back with RXDCTL.ENABLE bit cleared */
+	IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl);
+
+	if (hw->mac.type == ixgbe_mac_82598EB &&
+	    !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP))
+		return;
+
+	/* the hardware may take up to 100us to really disable the rx queue */
+	do {
+		udelay(10);
+		rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
+	} while (--wait_loop && (rxdctl & IXGBE_RXDCTL_ENABLE));
+
+	if (!wait_loop) {
+		e_err(drv, "RXDCTL.ENABLE on Rx queue %d not cleared within "
+		      "the polling period\n", reg_idx);
+	}
+}
+
+void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
+			     struct ixgbe_ring *ring)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u64 rdba = ring->dma;
+	u32 rxdctl;
+	u8 reg_idx = ring->reg_idx;
+
+	/* disable queue to avoid issues while updating state */
+	rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
+	ixgbe_disable_rx_queue(adapter, ring);
+
+	IXGBE_WRITE_REG(hw, IXGBE_RDBAL(reg_idx), (rdba & DMA_BIT_MASK(32)));
+	IXGBE_WRITE_REG(hw, IXGBE_RDBAH(reg_idx), (rdba >> 32));
+	IXGBE_WRITE_REG(hw, IXGBE_RDLEN(reg_idx),
+			ring->count * sizeof(union ixgbe_adv_rx_desc));
+	IXGBE_WRITE_REG(hw, IXGBE_RDH(reg_idx), 0);
+	IXGBE_WRITE_REG(hw, IXGBE_RDT(reg_idx), 0);
+	ring->tail = adapter->io_addr + IXGBE_RDT(reg_idx);
+
+	ixgbe_configure_srrctl(adapter, ring);
+	ixgbe_configure_rscctl(adapter, ring);
+
+	if (hw->mac.type == ixgbe_mac_82598EB) {
+		/*
+		 * enable cache line friendly hardware writes:
+		 * PTHRESH=32 descriptors (half the internal cache),
+		 * this also removes ugly rx_no_buffer_count increment
+		 * HTHRESH=4 descriptors (to minimize latency on fetch)
+		 * WTHRESH=8 burst writeback up to two cache lines
+		 */
+		rxdctl &= ~0x3FFFFF;
+		rxdctl |=  0x080420;
+	}
+
+	/* enable receive descriptor ring */
+	rxdctl |= IXGBE_RXDCTL_ENABLE;
+	IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl);
+
+	ixgbe_rx_desc_queue_enable(adapter, ring);
+	ixgbe_alloc_rx_buffers(ring, ixgbe_desc_unused(ring));
+}
+
+static void ixgbe_setup_psrtype(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int rss_i = adapter->ring_feature[RING_F_RSS].indices;
+	u16 pool;
+
+	/* PSRTYPE must be initialized in non 82598 adapters */
+	u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
+		      IXGBE_PSRTYPE_UDPHDR |
+		      IXGBE_PSRTYPE_IPV4HDR |
+		      IXGBE_PSRTYPE_L2HDR |
+		      IXGBE_PSRTYPE_IPV6HDR;
+
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return;
+
+	if (rss_i > 3)
+		psrtype |= 2 << 29;
+	else if (rss_i > 1)
+		psrtype |= 1 << 29;
+
+	for_each_set_bit(pool, &adapter->fwd_bitmask, 32)
+		IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(VMDQ_P(pool)), psrtype);
+}
+
+static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 reg_offset, vf_shift;
+	u32 gcr_ext, vmdctl;
+	int i;
+
+	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+		return;
+
+	vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+	vmdctl |= IXGBE_VMD_CTL_VMDQ_EN;
+	vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
+	vmdctl |= VMDQ_P(0) << IXGBE_VT_CTL_POOL_SHIFT;
+	vmdctl |= IXGBE_VT_CTL_REPLEN;
+	IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
+
+	vf_shift = VMDQ_P(0) % 32;
+	reg_offset = (VMDQ_P(0) >= 32) ? 1 : 0;
+
+	/* Enable only the PF's pool for Tx/Rx */
+	IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (~0) << vf_shift);
+	IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset ^ 1), reg_offset - 1);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), (~0) << vf_shift);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset ^ 1), reg_offset - 1);
+	if (adapter->bridge_mode == BRIDGE_MODE_VEB)
+		IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
+
+	/* Map PF MAC address in RAR Entry 0 to first pool following VFs */
+	hw->mac.ops.set_vmdq(hw, 0, VMDQ_P(0));
+
+	/*
+	 * Set up VF register offsets for selected VT Mode,
+	 * i.e. 32 or 64 VFs for SR-IOV
+	 */
+	switch (adapter->ring_feature[RING_F_VMDQ].mask) {
+	case IXGBE_82599_VMDQ_8Q_MASK:
+		gcr_ext = IXGBE_GCR_EXT_VT_MODE_16;
+		break;
+	case IXGBE_82599_VMDQ_4Q_MASK:
+		gcr_ext = IXGBE_GCR_EXT_VT_MODE_32;
+		break;
+	default:
+		gcr_ext = IXGBE_GCR_EXT_VT_MODE_64;
+		break;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
+
+
+	/* Enable MAC Anti-Spoofing */
+	hw->mac.ops.set_mac_anti_spoofing(hw, (adapter->num_vfs != 0),
+					  adapter->num_vfs);
+
+	/* Ensure LLDP is set for Ethertype Antispoofing if we will be
+	 * calling set_ethertype_anti_spoofing for each VF in loop below
+	 */
+	if (hw->mac.ops.set_ethertype_anti_spoofing)
+		IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_LLDP),
+				(IXGBE_ETQF_FILTER_EN    | /* enable filter */
+				 IXGBE_ETQF_TX_ANTISPOOF | /* tx antispoof */
+				 IXGBE_ETH_P_LLDP));	   /* LLDP eth type */
+
+	/* For VFs that have spoof checking turned off */
+	for (i = 0; i < adapter->num_vfs; i++) {
+		if (!adapter->vfinfo[i].spoofchk_enabled)
+			ixgbe_ndo_set_vf_spoofchk(adapter->netdev, i, false);
+
+		/* enable ethertype anti spoofing if hw supports it */
+		if (hw->mac.ops.set_ethertype_anti_spoofing)
+			hw->mac.ops.set_ethertype_anti_spoofing(hw, true, i);
+
+		/* Enable/Disable RSS query feature  */
+		ixgbe_ndo_set_vf_rss_query_en(adapter->netdev, i,
+					  adapter->vfinfo[i].rss_query_enabled);
+	}
+}
+
+static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+	struct ixgbe_ring *rx_ring;
+	int i;
+	u32 mhadd, hlreg0;
+
+#ifdef IXGBE_FCOE
+	/* adjust max frame to be able to do baby jumbo for FCoE */
+	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+	    (max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE))
+		max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE;
+
+#endif /* IXGBE_FCOE */
+
+	/* adjust max frame to be at least the size of a standard frame */
+	if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN))
+		max_frame = (ETH_FRAME_LEN + ETH_FCS_LEN);
+
+	mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
+	if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) {
+		mhadd &= ~IXGBE_MHADD_MFS_MASK;
+		mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT;
+
+		IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd);
+	}
+
+	hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+	/* set jumbo enable since MHADD.MFS is keeping size locked at max_frame */
+	hlreg0 |= IXGBE_HLREG0_JUMBOEN;
+	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+
+	/*
+	 * Setup the HW Rx Head and Tail Descriptor Pointers and
+	 * the Base and Length of the Rx Descriptor Ring
+	 */
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		rx_ring = adapter->rx_ring[i];
+		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+			set_ring_rsc_enabled(rx_ring);
+		else
+			clear_ring_rsc_enabled(rx_ring);
+	}
+}
+
+static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_82598EB:
+		/*
+		 * For VMDq support of different descriptor types or
+		 * buffer sizes through the use of multiple SRRCTL
+		 * registers, RDRXCTL.MVMEN must be set to 1
+		 *
+		 * also, the manual doesn't mention it clearly but DCA hints
+		 * will only use queue 0's tags unless this bit is set.  Side
+		 * effects of setting this bit are only that SRRCTL must be
+		 * fully programmed [0..15]
+		 */
+		rdrxctl |= IXGBE_RDRXCTL_MVMEN;
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		/* Disable RSC for ACK packets */
+		IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
+		   (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU)));
+		rdrxctl &= ~IXGBE_RDRXCTL_RSCFRSTSIZE;
+		/* hardware requires some bits to be set by default */
+		rdrxctl |= (IXGBE_RDRXCTL_RSCACKC | IXGBE_RDRXCTL_FCOE_WRFIX);
+		rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP;
+		break;
+	default:
+		/* We should do nothing since we don't know this hardware */
+		return;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
+}
+
+/**
+ * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i;
+	u32 rxctrl, rfctl;
+
+	/* disable receives while setting up the descriptors */
+	hw->mac.ops.disable_rx(hw);
+
+	ixgbe_setup_psrtype(adapter);
+	ixgbe_setup_rdrxctl(adapter);
+
+	/* RSC Setup */
+	rfctl = IXGBE_READ_REG(hw, IXGBE_RFCTL);
+	rfctl &= ~IXGBE_RFCTL_RSC_DIS;
+	if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))
+		rfctl |= IXGBE_RFCTL_RSC_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_RFCTL, rfctl);
+
+	/* Program registers for the distribution of queues */
+	ixgbe_setup_mrqc(adapter);
+
+	/* set_rx_buffer_len must be called before ring initialization */
+	ixgbe_set_rx_buffer_len(adapter);
+
+	/*
+	 * Setup the HW Rx Head and Tail Descriptor Pointers and
+	 * the Base and Length of the Rx Descriptor Ring
+	 */
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		ixgbe_configure_rx_ring(adapter, adapter->rx_ring[i]);
+
+	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	/* disable drop enable for 82598 parts */
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		rxctrl |= IXGBE_RXCTRL_DMBYPS;
+
+	/* enable all receives */
+	rxctrl |= IXGBE_RXCTRL_RXEN;
+	hw->mac.ops.enable_rx_dma(hw, rxctrl);
+}
+
+static int ixgbe_vlan_rx_add_vid(struct net_device *netdev,
+				 __be16 proto, u16 vid)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	/* add VID to filter table */
+	hw->mac.ops.set_vfta(&adapter->hw, vid, VMDQ_P(0), true);
+	set_bit(vid, adapter->active_vlans);
+
+	return 0;
+}
+
+static int ixgbe_vlan_rx_kill_vid(struct net_device *netdev,
+				  __be16 proto, u16 vid)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	/* remove VID from filter table */
+	hw->mac.ops.set_vfta(&adapter->hw, vid, VMDQ_P(0), false);
+	clear_bit(vid, adapter->active_vlans);
+
+	return 0;
+}
+
+/**
+ * ixgbe_vlan_strip_disable - helper to disable hw vlan stripping
+ * @adapter: driver data
+ */
+static void ixgbe_vlan_strip_disable(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 vlnctrl;
+	int i, j;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+		vlnctrl &= ~IXGBE_VLNCTRL_VME;
+		IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			struct ixgbe_ring *ring = adapter->rx_ring[i];
+
+			if (ring->l2_accel_priv)
+				continue;
+			j = ring->reg_idx;
+			vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
+			vlnctrl &= ~IXGBE_RXDCTL_VME;
+			IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * ixgbe_vlan_strip_enable - helper to enable hw vlan stripping
+ * @adapter: driver data
+ */
+static void ixgbe_vlan_strip_enable(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 vlnctrl;
+	int i, j;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+		vlnctrl |= IXGBE_VLNCTRL_VME;
+		IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			struct ixgbe_ring *ring = adapter->rx_ring[i];
+
+			if (ring->l2_accel_priv)
+				continue;
+			j = ring->reg_idx;
+			vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
+			vlnctrl |= IXGBE_RXDCTL_VME;
+			IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
+{
+	u16 vid;
+
+	ixgbe_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0);
+
+	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+		ixgbe_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
+}
+
+/**
+ * ixgbe_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
+ *
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ *                0 on no addresses written
+ *                X on writing X addresses to MTA
+ **/
+static int ixgbe_write_mc_addr_list(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if (!netif_running(netdev))
+		return 0;
+
+	if (hw->mac.ops.update_mc_addr_list)
+		hw->mac.ops.update_mc_addr_list(hw, netdev);
+	else
+		return -ENOMEM;
+
+#ifdef CONFIG_PCI_IOV
+	ixgbe_restore_vf_multicasts(adapter);
+#endif
+
+	return netdev_mc_count(netdev);
+}
+
+#ifdef CONFIG_PCI_IOV
+void ixgbe_full_sync_mac_table(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i;
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		if (adapter->mac_table[i].state & IXGBE_MAC_STATE_IN_USE)
+			hw->mac.ops.set_rar(hw, i, adapter->mac_table[i].addr,
+					    adapter->mac_table[i].queue,
+					    IXGBE_RAH_AV);
+		else
+			hw->mac.ops.clear_rar(hw, i);
+
+		adapter->mac_table[i].state &= ~(IXGBE_MAC_STATE_MODIFIED);
+	}
+}
+#endif
+
+static void ixgbe_sync_mac_table(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i;
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		if (adapter->mac_table[i].state & IXGBE_MAC_STATE_MODIFIED) {
+			if (adapter->mac_table[i].state &
+			    IXGBE_MAC_STATE_IN_USE)
+				hw->mac.ops.set_rar(hw, i,
+						adapter->mac_table[i].addr,
+						adapter->mac_table[i].queue,
+						IXGBE_RAH_AV);
+			else
+				hw->mac.ops.clear_rar(hw, i);
+
+			adapter->mac_table[i].state &=
+						~(IXGBE_MAC_STATE_MODIFIED);
+		}
+	}
+}
+
+static void ixgbe_flush_sw_mac_table(struct ixgbe_adapter *adapter)
+{
+	int i;
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		adapter->mac_table[i].state |= IXGBE_MAC_STATE_MODIFIED;
+		adapter->mac_table[i].state &= ~IXGBE_MAC_STATE_IN_USE;
+		eth_zero_addr(adapter->mac_table[i].addr);
+		adapter->mac_table[i].queue = 0;
+	}
+	ixgbe_sync_mac_table(adapter);
+}
+
+static int ixgbe_available_rars(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i, count = 0;
+
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		if (adapter->mac_table[i].state == 0)
+			count++;
+	}
+	return count;
+}
+
+/* this function destroys the first RAR entry */
+static void ixgbe_mac_set_default_filter(struct ixgbe_adapter *adapter,
+					 u8 *addr)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	memcpy(&adapter->mac_table[0].addr, addr, ETH_ALEN);
+	adapter->mac_table[0].queue = VMDQ_P(0);
+	adapter->mac_table[0].state = (IXGBE_MAC_STATE_DEFAULT |
+				       IXGBE_MAC_STATE_IN_USE);
+	hw->mac.ops.set_rar(hw, 0, adapter->mac_table[0].addr,
+			    adapter->mac_table[0].queue,
+			    IXGBE_RAH_AV);
+}
+
+int ixgbe_add_mac_filter(struct ixgbe_adapter *adapter, u8 *addr, u16 queue)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i;
+
+	if (is_zero_ether_addr(addr))
+		return -EINVAL;
+
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		if (adapter->mac_table[i].state & IXGBE_MAC_STATE_IN_USE)
+			continue;
+		adapter->mac_table[i].state |= (IXGBE_MAC_STATE_MODIFIED |
+						IXGBE_MAC_STATE_IN_USE);
+		ether_addr_copy(adapter->mac_table[i].addr, addr);
+		adapter->mac_table[i].queue = queue;
+		ixgbe_sync_mac_table(adapter);
+		return i;
+	}
+	return -ENOMEM;
+}
+
+int ixgbe_del_mac_filter(struct ixgbe_adapter *adapter, u8 *addr, u16 queue)
+{
+	/* search table for addr, if found, set to 0 and sync */
+	int i;
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if (is_zero_ether_addr(addr))
+		return -EINVAL;
+
+	for (i = 0; i < hw->mac.num_rar_entries; i++) {
+		if (ether_addr_equal(addr, adapter->mac_table[i].addr) &&
+		    adapter->mac_table[i].queue == queue) {
+			adapter->mac_table[i].state |= IXGBE_MAC_STATE_MODIFIED;
+			adapter->mac_table[i].state &= ~IXGBE_MAC_STATE_IN_USE;
+			eth_zero_addr(adapter->mac_table[i].addr);
+			adapter->mac_table[i].queue = 0;
+			ixgbe_sync_mac_table(adapter);
+			return 0;
+		}
+	}
+	return -ENOMEM;
+}
+/**
+ * ixgbe_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ *                0 on no addresses written
+ *                X on writing X addresses to the RAR table
+ **/
+static int ixgbe_write_uc_addr_list(struct net_device *netdev, int vfn)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	int count = 0;
+
+	/* return ENOMEM indicating insufficient memory for addresses */
+	if (netdev_uc_count(netdev) > ixgbe_available_rars(adapter))
+		return -ENOMEM;
+
+	if (!netdev_uc_empty(netdev)) {
+		struct netdev_hw_addr *ha;
+		netdev_for_each_uc_addr(ha, netdev) {
+			ixgbe_del_mac_filter(adapter, ha->addr, vfn);
+			ixgbe_add_mac_filter(adapter, ha->addr, vfn);
+			count++;
+		}
+	}
+	return count;
+}
+
+/**
+ * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_method entry point is called whenever the unicast/multicast
+ * address list or the network interface flags are updated.  This routine is
+ * responsible for configuring the hardware for proper unicast, multicast and
+ * promiscuous mode.
+ **/
+void ixgbe_set_rx_mode(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE;
+	u32 vlnctrl;
+	int count;
+
+	/* Check for Promiscuous and All Multicast modes */
+	fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+
+	/* set all bits that we expect to always be set */
+	fctrl &= ~IXGBE_FCTRL_SBP; /* disable store-bad-packets */
+	fctrl |= IXGBE_FCTRL_BAM;
+	fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */
+	fctrl |= IXGBE_FCTRL_PMCF;
+
+	/* clear the bits we are changing the status of */
+	fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
+	vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN);
+	if (netdev->flags & IFF_PROMISC) {
+		hw->addr_ctrl.user_set_promisc = true;
+		fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
+		vmolr |= IXGBE_VMOLR_MPE;
+		/* Only disable hardware filter vlans in promiscuous mode
+		 * if SR-IOV and VMDQ are disabled - otherwise ensure
+		 * that hardware VLAN filters remain enabled.
+		 */
+		if (adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED |
+				      IXGBE_FLAG_SRIOV_ENABLED))
+			vlnctrl |= (IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN);
+	} else {
+		if (netdev->flags & IFF_ALLMULTI) {
+			fctrl |= IXGBE_FCTRL_MPE;
+			vmolr |= IXGBE_VMOLR_MPE;
+		}
+		vlnctrl |= IXGBE_VLNCTRL_VFE;
+		hw->addr_ctrl.user_set_promisc = false;
+	}
+
+	/*
+	 * Write addresses to available RAR registers, if there is not
+	 * sufficient space to store all the addresses then enable
+	 * unicast promiscuous mode
+	 */
+	count = ixgbe_write_uc_addr_list(netdev, VMDQ_P(0));
+	if (count < 0) {
+		fctrl |= IXGBE_FCTRL_UPE;
+		vmolr |= IXGBE_VMOLR_ROPE;
+	}
+
+	/* Write addresses to the MTA, if the attempt fails
+	 * then we should just turn on promiscuous mode so
+	 * that we can at least receive multicast traffic
+	 */
+	count = ixgbe_write_mc_addr_list(netdev);
+	if (count < 0) {
+		fctrl |= IXGBE_FCTRL_MPE;
+		vmolr |= IXGBE_VMOLR_MPE;
+	} else if (count) {
+		vmolr |= IXGBE_VMOLR_ROMPE;
+	}
+
+	if (hw->mac.type != ixgbe_mac_82598EB) {
+		vmolr |= IXGBE_READ_REG(hw, IXGBE_VMOLR(VMDQ_P(0))) &
+			 ~(IXGBE_VMOLR_MPE | IXGBE_VMOLR_ROMPE |
+			   IXGBE_VMOLR_ROPE);
+		IXGBE_WRITE_REG(hw, IXGBE_VMOLR(VMDQ_P(0)), vmolr);
+	}
+
+	/* This is useful for sniffing bad packets. */
+	if (adapter->netdev->features & NETIF_F_RXALL) {
+		/* UPE and MPE will be handled by normal PROMISC logic
+		 * in e1000e_set_rx_mode */
+		fctrl |= (IXGBE_FCTRL_SBP | /* Receive bad packets */
+			  IXGBE_FCTRL_BAM | /* RX All Bcast Pkts */
+			  IXGBE_FCTRL_PMCF); /* RX All MAC Ctrl Pkts */
+
+		fctrl &= ~(IXGBE_FCTRL_DPF);
+		/* NOTE:  VLAN filtering is disabled by setting PROMISC */
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
+	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+
+	if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
+		ixgbe_vlan_strip_enable(adapter);
+	else
+		ixgbe_vlan_strip_disable(adapter);
+}
+
+static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
+{
+	int q_idx;
+
+	for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++) {
+		ixgbe_qv_init_lock(adapter->q_vector[q_idx]);
+		napi_enable(&adapter->q_vector[q_idx]->napi);
+	}
+}
+
+static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter)
+{
+	int q_idx;
+
+	for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++) {
+		napi_disable(&adapter->q_vector[q_idx]->napi);
+		while (!ixgbe_qv_disable(adapter->q_vector[q_idx])) {
+			pr_info("QV %d locked\n", q_idx);
+			usleep_range(1000, 20000);
+		}
+	}
+}
+
+#ifdef CONFIG_IXGBE_DCB
+/**
+ * ixgbe_configure_dcb - Configure DCB hardware
+ * @adapter: ixgbe adapter struct
+ *
+ * This is called by the driver on open to configure the DCB hardware.
+ * This is also called by the gennetlink interface when reconfiguring
+ * the DCB state.
+ */
+static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+
+	if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) {
+		if (hw->mac.type == ixgbe_mac_82598EB)
+			netif_set_gso_max_size(adapter->netdev, 65536);
+		return;
+	}
+
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		netif_set_gso_max_size(adapter->netdev, 32768);
+
+#ifdef IXGBE_FCOE
+	if (adapter->netdev->features & NETIF_F_FCOE_MTU)
+		max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
+#endif
+
+	/* reconfigure the hardware */
+	if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) {
+		ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
+						DCB_TX_CONFIG);
+		ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
+						DCB_RX_CONFIG);
+		ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg);
+	} else if (adapter->ixgbe_ieee_ets && adapter->ixgbe_ieee_pfc) {
+		ixgbe_dcb_hw_ets(&adapter->hw,
+				 adapter->ixgbe_ieee_ets,
+				 max_frame);
+		ixgbe_dcb_hw_pfc_config(&adapter->hw,
+					adapter->ixgbe_ieee_pfc->pfc_en,
+					adapter->ixgbe_ieee_ets->prio_tc);
+	}
+
+	/* Enable RSS Hash per TC */
+	if (hw->mac.type != ixgbe_mac_82598EB) {
+		u32 msb = 0;
+		u16 rss_i = adapter->ring_feature[RING_F_RSS].indices - 1;
+
+		while (rss_i) {
+			msb++;
+			rss_i >>= 1;
+		}
+
+		/* write msb to all 8 TCs in one write */
+		IXGBE_WRITE_REG(hw, IXGBE_RQTC, msb * 0x11111111);
+	}
+}
+#endif
+
+/* Additional bittime to account for IXGBE framing */
+#define IXGBE_ETH_FRAMING 20
+
+/**
+ * ixgbe_hpbthresh - calculate high water mark for flow control
+ *
+ * @adapter: board private structure to calculate for
+ * @pb: packet buffer to calculate
+ */
+static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct net_device *dev = adapter->netdev;
+	int link, tc, kb, marker;
+	u32 dv_id, rx_pba;
+
+	/* Calculate max LAN frame size */
+	tc = link = dev->mtu + ETH_HLEN + ETH_FCS_LEN + IXGBE_ETH_FRAMING;
+
+#ifdef IXGBE_FCOE
+	/* FCoE traffic class uses FCOE jumbo frames */
+	if ((dev->features & NETIF_F_FCOE_MTU) &&
+	    (tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) &&
+	    (pb == ixgbe_fcoe_get_tc(adapter)))
+		tc = IXGBE_FCOE_JUMBO_FRAME_SIZE;
+#endif
+
+	/* Calculate delay value for device */
+	switch (hw->mac.type) {
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		dv_id = IXGBE_DV_X540(link, tc);
+		break;
+	default:
+		dv_id = IXGBE_DV(link, tc);
+		break;
+	}
+
+	/* Loopback switch introduces additional latency */
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		dv_id += IXGBE_B2BT(tc);
+
+	/* Delay value is calculated in bit times convert to KB */
+	kb = IXGBE_BT2KB(dv_id);
+	rx_pba = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(pb)) >> 10;
+
+	marker = rx_pba - kb;
+
+	/* It is possible that the packet buffer is not large enough
+	 * to provide required headroom. In this case throw an error
+	 * to user and a do the best we can.
+	 */
+	if (marker < 0) {
+		e_warn(drv, "Packet Buffer(%i) can not provide enough"
+			    "headroom to support flow control."
+			    "Decrease MTU or number of traffic classes\n", pb);
+		marker = tc + 1;
+	}
+
+	return marker;
+}
+
+/**
+ * ixgbe_lpbthresh - calculate low water mark for for flow control
+ *
+ * @adapter: board private structure to calculate for
+ * @pb: packet buffer to calculate
+ */
+static int ixgbe_lpbthresh(struct ixgbe_adapter *adapter, int pb)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct net_device *dev = adapter->netdev;
+	int tc;
+	u32 dv_id;
+
+	/* Calculate max LAN frame size */
+	tc = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
+
+#ifdef IXGBE_FCOE
+	/* FCoE traffic class uses FCOE jumbo frames */
+	if ((dev->features & NETIF_F_FCOE_MTU) &&
+	    (tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) &&
+	    (pb == netdev_get_prio_tc_map(dev, adapter->fcoe.up)))
+		tc = IXGBE_FCOE_JUMBO_FRAME_SIZE;
+#endif
+
+	/* Calculate delay value for device */
+	switch (hw->mac.type) {
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		dv_id = IXGBE_LOW_DV_X540(tc);
+		break;
+	default:
+		dv_id = IXGBE_LOW_DV(tc);
+		break;
+	}
+
+	/* Delay value is calculated in bit times convert to KB */
+	return IXGBE_BT2KB(dv_id);
+}
+
+/*
+ * ixgbe_pbthresh_setup - calculate and setup high low water marks
+ */
+static void ixgbe_pbthresh_setup(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int num_tc = netdev_get_num_tc(adapter->netdev);
+	int i;
+
+	if (!num_tc)
+		num_tc = 1;
+
+	for (i = 0; i < num_tc; i++) {
+		hw->fc.high_water[i] = ixgbe_hpbthresh(adapter, i);
+		hw->fc.low_water[i] = ixgbe_lpbthresh(adapter, i);
+
+		/* Low water marks must not be larger than high water marks */
+		if (hw->fc.low_water[i] > hw->fc.high_water[i])
+			hw->fc.low_water[i] = 0;
+	}
+
+	for (; i < MAX_TRAFFIC_CLASS; i++)
+		hw->fc.high_water[i] = 0;
+}
+
+static void ixgbe_configure_pb(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int hdrm;
+	u8 tc = netdev_get_num_tc(adapter->netdev);
+
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+		hdrm = 32 << adapter->fdir_pballoc;
+	else
+		hdrm = 0;
+
+	hw->mac.ops.set_rxpba(hw, tc, hdrm, PBA_STRATEGY_EQUAL);
+	ixgbe_pbthresh_setup(adapter);
+}
+
+static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct hlist_node *node2;
+	struct ixgbe_fdir_filter *filter;
+
+	spin_lock(&adapter->fdir_perfect_lock);
+
+	if (!hlist_empty(&adapter->fdir_filter_list))
+		ixgbe_fdir_set_input_mask_82599(hw, &adapter->fdir_mask);
+
+	hlist_for_each_entry_safe(filter, node2,
+				  &adapter->fdir_filter_list, fdir_node) {
+		ixgbe_fdir_write_perfect_filter_82599(hw,
+				&filter->filter,
+				filter->sw_idx,
+				(filter->action == IXGBE_FDIR_DROP_QUEUE) ?
+				IXGBE_FDIR_DROP_QUEUE :
+				adapter->rx_ring[filter->action]->reg_idx);
+	}
+
+	spin_unlock(&adapter->fdir_perfect_lock);
+}
+
+static void ixgbe_macvlan_set_rx_mode(struct net_device *dev, unsigned int pool,
+				      struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 vmolr;
+
+	/* No unicast promiscuous support for VMDQ devices. */
+	vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(pool));
+	vmolr |= (IXGBE_VMOLR_ROMPE | IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE);
+
+	/* clear the affected bit */
+	vmolr &= ~IXGBE_VMOLR_MPE;
+
+	if (dev->flags & IFF_ALLMULTI) {
+		vmolr |= IXGBE_VMOLR_MPE;
+	} else {
+		vmolr |= IXGBE_VMOLR_ROMPE;
+		hw->mac.ops.update_mc_addr_list(hw, dev);
+	}
+	ixgbe_write_uc_addr_list(adapter->netdev, pool);
+	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(pool), vmolr);
+}
+
+static void ixgbe_fwd_psrtype(struct ixgbe_fwd_adapter *vadapter)
+{
+	struct ixgbe_adapter *adapter = vadapter->real_adapter;
+	int rss_i = adapter->num_rx_queues_per_pool;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 pool = vadapter->pool;
+	u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
+		      IXGBE_PSRTYPE_UDPHDR |
+		      IXGBE_PSRTYPE_IPV4HDR |
+		      IXGBE_PSRTYPE_L2HDR |
+		      IXGBE_PSRTYPE_IPV6HDR;
+
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return;
+
+	if (rss_i > 3)
+		psrtype |= 2 << 29;
+	else if (rss_i > 1)
+		psrtype |= 1 << 29;
+
+	IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(VMDQ_P(pool)), psrtype);
+}
+
+/**
+ * ixgbe_clean_rx_ring - Free Rx Buffers per Queue
+ * @rx_ring: ring to free buffers from
+ **/
+static void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring)
+{
+	struct device *dev = rx_ring->dev;
+	unsigned long size;
+	u16 i;
+
+	/* ring already cleared, nothing to do */
+	if (!rx_ring->rx_buffer_info)
+		return;
+
+	/* Free all the Rx ring sk_buffs */
+	for (i = 0; i < rx_ring->count; i++) {
+		struct ixgbe_rx_buffer *rx_buffer = &rx_ring->rx_buffer_info[i];
+
+		if (rx_buffer->skb) {
+			struct sk_buff *skb = rx_buffer->skb;
+			if (IXGBE_CB(skb)->page_released)
+				dma_unmap_page(dev,
+					       IXGBE_CB(skb)->dma,
+					       ixgbe_rx_bufsz(rx_ring),
+					       DMA_FROM_DEVICE);
+			dev_kfree_skb(skb);
+			rx_buffer->skb = NULL;
+		}
+
+		if (!rx_buffer->page)
+			continue;
+
+		dma_unmap_page(dev, rx_buffer->dma,
+			       ixgbe_rx_pg_size(rx_ring), DMA_FROM_DEVICE);
+		__free_pages(rx_buffer->page, ixgbe_rx_pg_order(rx_ring));
+
+		rx_buffer->page = NULL;
+	}
+
+	size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
+	memset(rx_ring->rx_buffer_info, 0, size);
+
+	/* Zero out the descriptor ring */
+	memset(rx_ring->desc, 0, rx_ring->size);
+
+	rx_ring->next_to_alloc = 0;
+	rx_ring->next_to_clean = 0;
+	rx_ring->next_to_use = 0;
+}
+
+static void ixgbe_disable_fwd_ring(struct ixgbe_fwd_adapter *vadapter,
+				   struct ixgbe_ring *rx_ring)
+{
+	struct ixgbe_adapter *adapter = vadapter->real_adapter;
+	int index = rx_ring->queue_index + vadapter->rx_base_queue;
+
+	/* shutdown specific queue receive and wait for dma to settle */
+	ixgbe_disable_rx_queue(adapter, rx_ring);
+	usleep_range(10000, 20000);
+	ixgbe_irq_disable_queues(adapter, ((u64)1 << index));
+	ixgbe_clean_rx_ring(rx_ring);
+	rx_ring->l2_accel_priv = NULL;
+}
+
+static int ixgbe_fwd_ring_down(struct net_device *vdev,
+			       struct ixgbe_fwd_adapter *accel)
+{
+	struct ixgbe_adapter *adapter = accel->real_adapter;
+	unsigned int rxbase = accel->rx_base_queue;
+	unsigned int txbase = accel->tx_base_queue;
+	int i;
+
+	netif_tx_stop_all_queues(vdev);
+
+	for (i = 0; i < adapter->num_rx_queues_per_pool; i++) {
+		ixgbe_disable_fwd_ring(accel, adapter->rx_ring[rxbase + i]);
+		adapter->rx_ring[rxbase + i]->netdev = adapter->netdev;
+	}
+
+	for (i = 0; i < adapter->num_rx_queues_per_pool; i++) {
+		adapter->tx_ring[txbase + i]->l2_accel_priv = NULL;
+		adapter->tx_ring[txbase + i]->netdev = adapter->netdev;
+	}
+
+
+	return 0;
+}
+
+static int ixgbe_fwd_ring_up(struct net_device *vdev,
+			     struct ixgbe_fwd_adapter *accel)
+{
+	struct ixgbe_adapter *adapter = accel->real_adapter;
+	unsigned int rxbase, txbase, queues;
+	int i, baseq, err = 0;
+
+	if (!test_bit(accel->pool, &adapter->fwd_bitmask))
+		return 0;
+
+	baseq = accel->pool * adapter->num_rx_queues_per_pool;
+	netdev_dbg(vdev, "pool %i:%i queues %i:%i VSI bitmask %lx\n",
+		   accel->pool, adapter->num_rx_pools,
+		   baseq, baseq + adapter->num_rx_queues_per_pool,
+		   adapter->fwd_bitmask);
+
+	accel->netdev = vdev;
+	accel->rx_base_queue = rxbase = baseq;
+	accel->tx_base_queue = txbase = baseq;
+
+	for (i = 0; i < adapter->num_rx_queues_per_pool; i++)
+		ixgbe_disable_fwd_ring(accel, adapter->rx_ring[rxbase + i]);
+
+	for (i = 0; i < adapter->num_rx_queues_per_pool; i++) {
+		adapter->rx_ring[rxbase + i]->netdev = vdev;
+		adapter->rx_ring[rxbase + i]->l2_accel_priv = accel;
+		ixgbe_configure_rx_ring(adapter, adapter->rx_ring[rxbase + i]);
+	}
+
+	for (i = 0; i < adapter->num_rx_queues_per_pool; i++) {
+		adapter->tx_ring[txbase + i]->netdev = vdev;
+		adapter->tx_ring[txbase + i]->l2_accel_priv = accel;
+	}
+
+	queues = min_t(unsigned int,
+		       adapter->num_rx_queues_per_pool, vdev->num_tx_queues);
+	err = netif_set_real_num_tx_queues(vdev, queues);
+	if (err)
+		goto fwd_queue_err;
+
+	err = netif_set_real_num_rx_queues(vdev, queues);
+	if (err)
+		goto fwd_queue_err;
+
+	if (is_valid_ether_addr(vdev->dev_addr))
+		ixgbe_add_mac_filter(adapter, vdev->dev_addr, accel->pool);
+
+	ixgbe_fwd_psrtype(accel);
+	ixgbe_macvlan_set_rx_mode(vdev, accel->pool, adapter);
+	return err;
+fwd_queue_err:
+	ixgbe_fwd_ring_down(vdev, accel);
+	return err;
+}
+
+static void ixgbe_configure_dfwd(struct ixgbe_adapter *adapter)
+{
+	struct net_device *upper;
+	struct list_head *iter;
+	int err;
+
+	netdev_for_each_all_upper_dev_rcu(adapter->netdev, upper, iter) {
+		if (netif_is_macvlan(upper)) {
+			struct macvlan_dev *dfwd = netdev_priv(upper);
+			struct ixgbe_fwd_adapter *vadapter = dfwd->fwd_priv;
+
+			if (dfwd->fwd_priv) {
+				err = ixgbe_fwd_ring_up(upper, vadapter);
+				if (err)
+					continue;
+			}
+		}
+	}
+}
+
+static void ixgbe_configure(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	ixgbe_configure_pb(adapter);
+#ifdef CONFIG_IXGBE_DCB
+	ixgbe_configure_dcb(adapter);
+#endif
+	/*
+	 * We must restore virtualization before VLANs or else
+	 * the VLVF registers will not be populated
+	 */
+	ixgbe_configure_virtualization(adapter);
+
+	ixgbe_set_rx_mode(adapter->netdev);
+	ixgbe_restore_vlan(adapter);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		hw->mac.ops.disable_rx_buff(hw);
+		break;
+	default:
+		break;
+	}
+
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+		ixgbe_init_fdir_signature_82599(&adapter->hw,
+						adapter->fdir_pballoc);
+	} else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) {
+		ixgbe_init_fdir_perfect_82599(&adapter->hw,
+					      adapter->fdir_pballoc);
+		ixgbe_fdir_filter_restore(adapter);
+	}
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		hw->mac.ops.enable_rx_buff(hw);
+		break;
+	default:
+		break;
+	}
+
+#ifdef IXGBE_FCOE
+	/* configure FCoE L2 filters, redirection table, and Rx control */
+	ixgbe_configure_fcoe(adapter);
+
+#endif /* IXGBE_FCOE */
+	ixgbe_configure_tx(adapter);
+	ixgbe_configure_rx(adapter);
+	ixgbe_configure_dfwd(adapter);
+}
+
+static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw)
+{
+	switch (hw->phy.type) {
+	case ixgbe_phy_sfp_avago:
+	case ixgbe_phy_sfp_ftl:
+	case ixgbe_phy_sfp_intel:
+	case ixgbe_phy_sfp_unknown:
+	case ixgbe_phy_sfp_passive_tyco:
+	case ixgbe_phy_sfp_passive_unknown:
+	case ixgbe_phy_sfp_active_unknown:
+	case ixgbe_phy_sfp_ftl_active:
+	case ixgbe_phy_qsfp_passive_unknown:
+	case ixgbe_phy_qsfp_active_unknown:
+	case ixgbe_phy_qsfp_intel:
+	case ixgbe_phy_qsfp_unknown:
+	/* ixgbe_phy_none is set when no SFP module is present */
+	case ixgbe_phy_none:
+		return true;
+	case ixgbe_phy_nl:
+		if (hw->mac.type == ixgbe_mac_82598EB)
+			return true;
+	default:
+		return false;
+	}
+}
+
+/**
+ * ixgbe_sfp_link_config - set up SFP+ link
+ * @adapter: pointer to private adapter struct
+ **/
+static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter)
+{
+	/*
+	 * We are assuming the worst case scenario here, and that
+	 * is that an SFP was inserted/removed after the reset
+	 * but before SFP detection was enabled.  As such the best
+	 * solution is to just start searching as soon as we start
+	 */
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+		adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP;
+
+	adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
+}
+
+/**
+ * ixgbe_non_sfp_link_config - set up non-SFP+ link
+ * @hw: pointer to private hardware struct
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw)
+{
+	u32 speed;
+	bool autoneg, link_up = false;
+	u32 ret = IXGBE_ERR_LINK_SETUP;
+
+	if (hw->mac.ops.check_link)
+		ret = hw->mac.ops.check_link(hw, &speed, &link_up, false);
+
+	if (ret)
+		return ret;
+
+	speed = hw->phy.autoneg_advertised;
+	if ((!speed) && (hw->mac.ops.get_link_capabilities))
+		ret = hw->mac.ops.get_link_capabilities(hw, &speed,
+							&autoneg);
+	if (ret)
+		return ret;
+
+	if (hw->mac.ops.setup_link)
+		ret = hw->mac.ops.setup_link(hw, speed, link_up);
+
+	return ret;
+}
+
+static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 gpie = 0;
+
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+		gpie = IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_PBA_SUPPORT |
+		       IXGBE_GPIE_OCD;
+		gpie |= IXGBE_GPIE_EIAME;
+		/*
+		 * use EIAM to auto-mask when MSI-X interrupt is asserted
+		 * this saves a register write for every interrupt
+		 */
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
+			IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
+			break;
+		case ixgbe_mac_82599EB:
+		case ixgbe_mac_X540:
+		case ixgbe_mac_X550:
+		case ixgbe_mac_X550EM_x:
+		default:
+			IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF);
+			IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF);
+			break;
+		}
+	} else {
+		/* legacy interrupts, use EIAM to auto-mask when reading EICR,
+		 * specifically only auto mask tx and rx interrupts */
+		IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
+	}
+
+	/* XXX: to interrupt immediately for EICS writes, enable this */
+	/* gpie |= IXGBE_GPIE_EIMEN; */
+
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+		gpie &= ~IXGBE_GPIE_VTMODE_MASK;
+
+		switch (adapter->ring_feature[RING_F_VMDQ].mask) {
+		case IXGBE_82599_VMDQ_8Q_MASK:
+			gpie |= IXGBE_GPIE_VTMODE_16;
+			break;
+		case IXGBE_82599_VMDQ_4Q_MASK:
+			gpie |= IXGBE_GPIE_VTMODE_32;
+			break;
+		default:
+			gpie |= IXGBE_GPIE_VTMODE_64;
+			break;
+		}
+	}
+
+	/* Enable Thermal over heat sensor interrupt */
+	if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) {
+		switch (adapter->hw.mac.type) {
+		case ixgbe_mac_82599EB:
+			gpie |= IXGBE_SDP0_GPIEN;
+			break;
+		case ixgbe_mac_X540:
+			gpie |= IXGBE_EIMS_TS;
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* Enable fan failure interrupt */
+	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
+		gpie |= IXGBE_SDP1_GPIEN;
+
+	if (hw->mac.type == ixgbe_mac_82599EB) {
+		gpie |= IXGBE_SDP1_GPIEN;
+		gpie |= IXGBE_SDP2_GPIEN;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
+}
+
+static void ixgbe_up_complete(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int err;
+	u32 ctrl_ext;
+
+	ixgbe_get_hw_control(adapter);
+	ixgbe_setup_gpie(adapter);
+
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+		ixgbe_configure_msix(adapter);
+	else
+		ixgbe_configure_msi_and_legacy(adapter);
+
+	/* enable the optics for 82599 SFP+ fiber */
+	if (hw->mac.ops.enable_tx_laser)
+		hw->mac.ops.enable_tx_laser(hw);
+
+	smp_mb__before_atomic();
+	clear_bit(__IXGBE_DOWN, &adapter->state);
+	ixgbe_napi_enable_all(adapter);
+
+	if (ixgbe_is_sfp(hw)) {
+		ixgbe_sfp_link_config(adapter);
+	} else {
+		err = ixgbe_non_sfp_link_config(hw);
+		if (err)
+			e_err(probe, "link_config FAILED %d\n", err);
+	}
+
+	/* clear any pending interrupts, may auto mask */
+	IXGBE_READ_REG(hw, IXGBE_EICR);
+	ixgbe_irq_enable(adapter, true, true);
+
+	/*
+	 * If this adapter has a fan, check to see if we had a failure
+	 * before we enabled the interrupt.
+	 */
+	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
+		u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		if (esdp & IXGBE_ESDP_SDP1)
+			e_crit(drv, "Fan has stopped, replace the adapter\n");
+	}
+
+	/* bring the link up in the watchdog, this could race with our first
+	 * link up interrupt but shouldn't be a problem */
+	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
+	adapter->link_check_timeout = jiffies;
+	mod_timer(&adapter->service_timer, jiffies);
+
+	/* Set PF Reset Done bit so PF/VF Mail Ops can work */
+	ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+	ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+}
+
+void ixgbe_reinit_locked(struct ixgbe_adapter *adapter)
+{
+	WARN_ON(in_interrupt());
+	/* put off any impending NetWatchDogTimeout */
+	adapter->netdev->trans_start = jiffies;
+
+	while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
+		usleep_range(1000, 2000);
+	ixgbe_down(adapter);
+	/*
+	 * If SR-IOV enabled then wait a bit before bringing the adapter
+	 * back up to give the VFs time to respond to the reset.  The
+	 * two second wait is based upon the watchdog timer cycle in
+	 * the VF driver.
+	 */
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		msleep(2000);
+	ixgbe_up(adapter);
+	clear_bit(__IXGBE_RESETTING, &adapter->state);
+}
+
+void ixgbe_up(struct ixgbe_adapter *adapter)
+{
+	/* hardware has been reset, we need to reload some things */
+	ixgbe_configure(adapter);
+
+	ixgbe_up_complete(adapter);
+}
+
+void ixgbe_reset(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	int err;
+	u8 old_addr[ETH_ALEN];
+
+	if (ixgbe_removed(hw->hw_addr))
+		return;
+	/* lock SFP init bit to prevent race conditions with the watchdog */
+	while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+		usleep_range(1000, 2000);
+
+	/* clear all SFP and link config related flags while holding SFP_INIT */
+	adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP |
+			     IXGBE_FLAG2_SFP_NEEDS_RESET);
+	adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
+
+	err = hw->mac.ops.init_hw(hw);
+	switch (err) {
+	case 0:
+	case IXGBE_ERR_SFP_NOT_PRESENT:
+	case IXGBE_ERR_SFP_NOT_SUPPORTED:
+		break;
+	case IXGBE_ERR_MASTER_REQUESTS_PENDING:
+		e_dev_err("master disable timed out\n");
+		break;
+	case IXGBE_ERR_EEPROM_VERSION:
+		/* We are running on a pre-production device, log a warning */
+		e_dev_warn("This device is a pre-production adapter/LOM. "
+			   "Please be aware there may be issues associated with "
+			   "your hardware.  If you are experiencing problems "
+			   "please contact your Intel or hardware "
+			   "representative who provided you with this "
+			   "hardware.\n");
+		break;
+	default:
+		e_dev_err("Hardware Error: %d\n", err);
+	}
+
+	clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+	/* do not flush user set addresses */
+	memcpy(old_addr, &adapter->mac_table[0].addr, netdev->addr_len);
+	ixgbe_flush_sw_mac_table(adapter);
+	ixgbe_mac_set_default_filter(adapter, old_addr);
+
+	/* update SAN MAC vmdq pool selection */
+	if (hw->mac.san_mac_rar_index)
+		hw->mac.ops.set_vmdq_san_mac(hw, VMDQ_P(0));
+
+	if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state))
+		ixgbe_ptp_reset(adapter);
+}
+
+/**
+ * ixgbe_clean_tx_ring - Free Tx Buffers
+ * @tx_ring: ring to be cleaned
+ **/
+static void ixgbe_clean_tx_ring(struct ixgbe_ring *tx_ring)
+{
+	struct ixgbe_tx_buffer *tx_buffer_info;
+	unsigned long size;
+	u16 i;
+
+	/* ring already cleared, nothing to do */
+	if (!tx_ring->tx_buffer_info)
+		return;
+
+	/* Free all the Tx ring sk_buffs */
+	for (i = 0; i < tx_ring->count; i++) {
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+	}
+
+	netdev_tx_reset_queue(txring_txq(tx_ring));
+
+	size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
+	memset(tx_ring->tx_buffer_info, 0, size);
+
+	/* Zero out the descriptor ring */
+	memset(tx_ring->desc, 0, tx_ring->size);
+
+	tx_ring->next_to_use = 0;
+	tx_ring->next_to_clean = 0;
+}
+
+/**
+ * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		ixgbe_clean_rx_ring(adapter->rx_ring[i]);
+}
+
+/**
+ * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		ixgbe_clean_tx_ring(adapter->tx_ring[i]);
+}
+
+static void ixgbe_fdir_filter_exit(struct ixgbe_adapter *adapter)
+{
+	struct hlist_node *node2;
+	struct ixgbe_fdir_filter *filter;
+
+	spin_lock(&adapter->fdir_perfect_lock);
+
+	hlist_for_each_entry_safe(filter, node2,
+				  &adapter->fdir_filter_list, fdir_node) {
+		hlist_del(&filter->fdir_node);
+		kfree(filter);
+	}
+	adapter->fdir_filter_count = 0;
+
+	spin_unlock(&adapter->fdir_perfect_lock);
+}
+
+void ixgbe_down(struct ixgbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct net_device *upper;
+	struct list_head *iter;
+	int i;
+
+	/* signal that we are down to the interrupt handler */
+	if (test_and_set_bit(__IXGBE_DOWN, &adapter->state))
+		return; /* do nothing if already down */
+
+	/* disable receives */
+	hw->mac.ops.disable_rx(hw);
+
+	/* disable all enabled rx queues */
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		/* this call also flushes the previous write */
+		ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]);
+
+	usleep_range(10000, 20000);
+
+	netif_tx_stop_all_queues(netdev);
+
+	/* call carrier off first to avoid false dev_watchdog timeouts */
+	netif_carrier_off(netdev);
+	netif_tx_disable(netdev);
+
+	/* disable any upper devices */
+	netdev_for_each_all_upper_dev_rcu(adapter->netdev, upper, iter) {
+		if (netif_is_macvlan(upper)) {
+			struct macvlan_dev *vlan = netdev_priv(upper);
+
+			if (vlan->fwd_priv) {
+				netif_tx_stop_all_queues(upper);
+				netif_carrier_off(upper);
+				netif_tx_disable(upper);
+			}
+		}
+	}
+
+	ixgbe_irq_disable(adapter);
+
+	ixgbe_napi_disable_all(adapter);
+
+	adapter->flags2 &= ~(IXGBE_FLAG2_FDIR_REQUIRES_REINIT |
+			     IXGBE_FLAG2_RESET_REQUESTED);
+	adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
+
+	del_timer_sync(&adapter->service_timer);
+
+	if (adapter->num_vfs) {
+		/* Clear EITR Select mapping */
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0);
+
+		/* Mark all the VFs as inactive */
+		for (i = 0 ; i < adapter->num_vfs; i++)
+			adapter->vfinfo[i].clear_to_send = false;
+
+		/* ping all the active vfs to let them know we are going down */
+		ixgbe_ping_all_vfs(adapter);
+
+		/* Disable all VFTE/VFRE TX/RX */
+		ixgbe_disable_tx_rx(adapter);
+	}
+
+	/* disable transmits in the hardware now that interrupts are off */
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		u8 reg_idx = adapter->tx_ring[i]->reg_idx;
+		IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH);
+	}
+
+	/* Disable the Tx DMA engine on 82599 and later MAC */
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL,
+				(IXGBE_READ_REG(hw, IXGBE_DMATXCTL) &
+				 ~IXGBE_DMATXCTL_TE));
+		break;
+	default:
+		break;
+	}
+
+	if (!pci_channel_offline(adapter->pdev))
+		ixgbe_reset(adapter);
+
+	/* power down the optics for 82599 SFP+ fiber */
+	if (hw->mac.ops.disable_tx_laser)
+		hw->mac.ops.disable_tx_laser(hw);
+
+	ixgbe_clean_all_tx_rings(adapter);
+	ixgbe_clean_all_rx_rings(adapter);
+
+#ifdef CONFIG_IXGBE_DCA
+	/* since we reset the hardware DCA settings were cleared */
+	ixgbe_setup_dca(adapter);
+#endif
+}
+
+/**
+ * ixgbe_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void ixgbe_tx_timeout(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	/* Do the reset outside of interrupt context */
+	ixgbe_tx_timeout_reset(adapter);
+}
+
+/**
+ * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * ixgbe_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int ixgbe_sw_init(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+	unsigned int rss, fdir;
+	u32 fwsm;
+#ifdef CONFIG_IXGBE_DCB
+	int j;
+	struct tc_configuration *tc;
+#endif
+
+	/* PCI config space info */
+
+	hw->vendor_id = pdev->vendor;
+	hw->device_id = pdev->device;
+	hw->revision_id = pdev->revision;
+	hw->subsystem_vendor_id = pdev->subsystem_vendor;
+	hw->subsystem_device_id = pdev->subsystem_device;
+
+	/* Set common capability flags and settings */
+	rss = min_t(int, ixgbe_max_rss_indices(adapter), num_online_cpus());
+	adapter->ring_feature[RING_F_RSS].limit = rss;
+	adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
+	adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
+	adapter->max_q_vectors = MAX_Q_VECTORS_82599;
+	adapter->atr_sample_rate = 20;
+	fdir = min_t(int, IXGBE_MAX_FDIR_INDICES, num_online_cpus());
+	adapter->ring_feature[RING_F_FDIR].limit = fdir;
+	adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K;
+#ifdef CONFIG_IXGBE_DCA
+	adapter->flags |= IXGBE_FLAG_DCA_CAPABLE;
+#endif
+#ifdef IXGBE_FCOE
+	adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
+	adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+#ifdef CONFIG_IXGBE_DCB
+	/* Default traffic class to use for FCoE */
+	adapter->fcoe.up = IXGBE_FCOE_DEFTC;
+#endif /* CONFIG_IXGBE_DCB */
+#endif /* IXGBE_FCOE */
+
+	adapter->mac_table = kzalloc(sizeof(struct ixgbe_mac_addr) *
+				     hw->mac.num_rar_entries,
+				     GFP_ATOMIC);
+
+	/* Set MAC specific capability flags and exceptions */
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		adapter->flags2 &= ~IXGBE_FLAG2_RSC_CAPABLE;
+		adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
+
+		if (hw->device_id == IXGBE_DEV_ID_82598AT)
+			adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE;
+
+		adapter->max_q_vectors = MAX_Q_VECTORS_82598;
+		adapter->ring_feature[RING_F_FDIR].limit = 0;
+		adapter->atr_sample_rate = 0;
+		adapter->fdir_pballoc = 0;
+#ifdef IXGBE_FCOE
+		adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE;
+		adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+#ifdef CONFIG_IXGBE_DCB
+		adapter->fcoe.up = 0;
+#endif /* IXGBE_DCB */
+#endif /* IXGBE_FCOE */
+		break;
+	case ixgbe_mac_82599EB:
+		if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM)
+			adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
+		break;
+	case ixgbe_mac_X540:
+		fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
+		if (fwsm & IXGBE_FWSM_TS_ENABLED)
+			adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
+		break;
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550:
+#ifdef CONFIG_IXGBE_DCA
+		adapter->flags &= ~IXGBE_FLAG_DCA_CAPABLE;
+#endif
+		break;
+	default:
+		break;
+	}
+
+#ifdef IXGBE_FCOE
+	/* FCoE support exists, always init the FCoE lock */
+	spin_lock_init(&adapter->fcoe.lock);
+
+#endif
+	/* n-tuple support exists, always init our spinlock */
+	spin_lock_init(&adapter->fdir_perfect_lock);
+
+#ifdef CONFIG_IXGBE_DCB
+	switch (hw->mac.type) {
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		adapter->dcb_cfg.num_tcs.pg_tcs = X540_TRAFFIC_CLASS;
+		adapter->dcb_cfg.num_tcs.pfc_tcs = X540_TRAFFIC_CLASS;
+		break;
+	default:
+		adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS;
+		adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS;
+		break;
+	}
+
+	/* Configure DCB traffic classes */
+	for (j = 0; j < MAX_TRAFFIC_CLASS; j++) {
+		tc = &adapter->dcb_cfg.tc_config[j];
+		tc->path[DCB_TX_CONFIG].bwg_id = 0;
+		tc->path[DCB_TX_CONFIG].bwg_percent = 12 + (j & 1);
+		tc->path[DCB_RX_CONFIG].bwg_id = 0;
+		tc->path[DCB_RX_CONFIG].bwg_percent = 12 + (j & 1);
+		tc->dcb_pfc = pfc_disabled;
+	}
+
+	/* Initialize default user to priority mapping, UPx->TC0 */
+	tc = &adapter->dcb_cfg.tc_config[0];
+	tc->path[DCB_TX_CONFIG].up_to_tc_bitmap = 0xFF;
+	tc->path[DCB_RX_CONFIG].up_to_tc_bitmap = 0xFF;
+
+	adapter->dcb_cfg.bw_percentage[DCB_TX_CONFIG][0] = 100;
+	adapter->dcb_cfg.bw_percentage[DCB_RX_CONFIG][0] = 100;
+	adapter->dcb_cfg.pfc_mode_enable = false;
+	adapter->dcb_set_bitmap = 0x00;
+	adapter->dcbx_cap = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE;
+	memcpy(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
+	       sizeof(adapter->temp_dcb_cfg));
+
+#endif
+
+	/* default flow control settings */
+	hw->fc.requested_mode = ixgbe_fc_full;
+	hw->fc.current_mode = ixgbe_fc_full;	/* init for ethtool output */
+	ixgbe_pbthresh_setup(adapter);
+	hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
+	hw->fc.send_xon = true;
+	hw->fc.disable_fc_autoneg = ixgbe_device_supports_autoneg_fc(hw);
+
+#ifdef CONFIG_PCI_IOV
+	if (max_vfs > 0)
+		e_dev_warn("Enabling SR-IOV VFs using the max_vfs module parameter is deprecated - please use the pci sysfs interface instead.\n");
+
+	/* assign number of SR-IOV VFs */
+	if (hw->mac.type != ixgbe_mac_82598EB) {
+		if (max_vfs > IXGBE_MAX_VFS_DRV_LIMIT) {
+			adapter->num_vfs = 0;
+			e_dev_warn("max_vfs parameter out of range. Not assigning any SR-IOV VFs\n");
+		} else {
+			adapter->num_vfs = max_vfs;
+		}
+	}
+#endif /* CONFIG_PCI_IOV */
+
+	/* enable itr by default in dynamic mode */
+	adapter->rx_itr_setting = 1;
+	adapter->tx_itr_setting = 1;
+
+	/* set default ring sizes */
+	adapter->tx_ring_count = IXGBE_DEFAULT_TXD;
+	adapter->rx_ring_count = IXGBE_DEFAULT_RXD;
+
+	/* set default work limits */
+	adapter->tx_work_limit = IXGBE_DEFAULT_TX_WORK;
+
+	/* initialize eeprom parameters */
+	if (ixgbe_init_eeprom_params_generic(hw)) {
+		e_dev_err("EEPROM initialization failed\n");
+		return -EIO;
+	}
+
+	/* PF holds first pool slot */
+	set_bit(0, &adapter->fwd_bitmask);
+	set_bit(__IXGBE_DOWN, &adapter->state);
+
+	return 0;
+}
+
+/**
+ * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @tx_ring:    tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+int ixgbe_setup_tx_resources(struct ixgbe_ring *tx_ring)
+{
+	struct device *dev = tx_ring->dev;
+	int orig_node = dev_to_node(dev);
+	int ring_node = -1;
+	int size;
+
+	size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
+
+	if (tx_ring->q_vector)
+		ring_node = tx_ring->q_vector->numa_node;
+
+	tx_ring->tx_buffer_info = vzalloc_node(size, ring_node);
+	if (!tx_ring->tx_buffer_info)
+		tx_ring->tx_buffer_info = vzalloc(size);
+	if (!tx_ring->tx_buffer_info)
+		goto err;
+
+	u64_stats_init(&tx_ring->syncp);
+
+	/* round up to nearest 4K */
+	tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc);
+	tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+	set_dev_node(dev, ring_node);
+	tx_ring->desc = dma_alloc_coherent(dev,
+					   tx_ring->size,
+					   &tx_ring->dma,
+					   GFP_KERNEL);
+	set_dev_node(dev, orig_node);
+	if (!tx_ring->desc)
+		tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
+						   &tx_ring->dma, GFP_KERNEL);
+	if (!tx_ring->desc)
+		goto err;
+
+	tx_ring->next_to_use = 0;
+	tx_ring->next_to_clean = 0;
+	return 0;
+
+err:
+	vfree(tx_ring->tx_buffer_info);
+	tx_ring->tx_buffer_info = NULL;
+	dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n");
+	return -ENOMEM;
+}
+
+/**
+ * ixgbe_setup_all_tx_resources - allocate all queues Tx resources
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not).  It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
+{
+	int i, err = 0;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		err = ixgbe_setup_tx_resources(adapter->tx_ring[i]);
+		if (!err)
+			continue;
+
+		e_err(probe, "Allocation for Tx Queue %u failed\n", i);
+		goto err_setup_tx;
+	}
+
+	return 0;
+err_setup_tx:
+	/* rewind the index freeing the rings as we go */
+	while (i--)
+		ixgbe_free_tx_resources(adapter->tx_ring[i]);
+	return err;
+}
+
+/**
+ * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @rx_ring:    rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int ixgbe_setup_rx_resources(struct ixgbe_ring *rx_ring)
+{
+	struct device *dev = rx_ring->dev;
+	int orig_node = dev_to_node(dev);
+	int ring_node = -1;
+	int size;
+
+	size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
+
+	if (rx_ring->q_vector)
+		ring_node = rx_ring->q_vector->numa_node;
+
+	rx_ring->rx_buffer_info = vzalloc_node(size, ring_node);
+	if (!rx_ring->rx_buffer_info)
+		rx_ring->rx_buffer_info = vzalloc(size);
+	if (!rx_ring->rx_buffer_info)
+		goto err;
+
+	u64_stats_init(&rx_ring->syncp);
+
+	/* Round up to nearest 4K */
+	rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc);
+	rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+	set_dev_node(dev, ring_node);
+	rx_ring->desc = dma_alloc_coherent(dev,
+					   rx_ring->size,
+					   &rx_ring->dma,
+					   GFP_KERNEL);
+	set_dev_node(dev, orig_node);
+	if (!rx_ring->desc)
+		rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
+						   &rx_ring->dma, GFP_KERNEL);
+	if (!rx_ring->desc)
+		goto err;
+
+	rx_ring->next_to_clean = 0;
+	rx_ring->next_to_use = 0;
+
+	return 0;
+err:
+	vfree(rx_ring->rx_buffer_info);
+	rx_ring->rx_buffer_info = NULL;
+	dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n");
+	return -ENOMEM;
+}
+
+/**
+ * ixgbe_setup_all_rx_resources - allocate all queues Rx resources
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not).  It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
+{
+	int i, err = 0;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		err = ixgbe_setup_rx_resources(adapter->rx_ring[i]);
+		if (!err)
+			continue;
+
+		e_err(probe, "Allocation for Rx Queue %u failed\n", i);
+		goto err_setup_rx;
+	}
+
+#ifdef IXGBE_FCOE
+	err = ixgbe_setup_fcoe_ddp_resources(adapter);
+	if (!err)
+#endif
+		return 0;
+err_setup_rx:
+	/* rewind the index freeing the rings as we go */
+	while (i--)
+		ixgbe_free_rx_resources(adapter->rx_ring[i]);
+	return err;
+}
+
+/**
+ * ixgbe_free_tx_resources - Free Tx Resources per Queue
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+void ixgbe_free_tx_resources(struct ixgbe_ring *tx_ring)
+{
+	ixgbe_clean_tx_ring(tx_ring);
+
+	vfree(tx_ring->tx_buffer_info);
+	tx_ring->tx_buffer_info = NULL;
+
+	/* if not set, then don't free */
+	if (!tx_ring->desc)
+		return;
+
+	dma_free_coherent(tx_ring->dev, tx_ring->size,
+			  tx_ring->desc, tx_ring->dma);
+
+	tx_ring->desc = NULL;
+}
+
+/**
+ * ixgbe_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		if (adapter->tx_ring[i]->desc)
+			ixgbe_free_tx_resources(adapter->tx_ring[i]);
+}
+
+/**
+ * ixgbe_free_rx_resources - Free Rx Resources
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+void ixgbe_free_rx_resources(struct ixgbe_ring *rx_ring)
+{
+	ixgbe_clean_rx_ring(rx_ring);
+
+	vfree(rx_ring->rx_buffer_info);
+	rx_ring->rx_buffer_info = NULL;
+
+	/* if not set, then don't free */
+	if (!rx_ring->desc)
+		return;
+
+	dma_free_coherent(rx_ring->dev, rx_ring->size,
+			  rx_ring->desc, rx_ring->dma);
+
+	rx_ring->desc = NULL;
+}
+
+/**
+ * ixgbe_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter)
+{
+	int i;
+
+#ifdef IXGBE_FCOE
+	ixgbe_free_fcoe_ddp_resources(adapter);
+
+#endif
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		if (adapter->rx_ring[i]->desc)
+			ixgbe_free_rx_resources(adapter->rx_ring[i]);
+}
+
+/**
+ * ixgbe_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+
+	/* MTU < 68 is an error and causes problems on some kernels */
+	if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
+		return -EINVAL;
+
+	/*
+	 * For 82599EB we cannot allow legacy VFs to enable their receive
+	 * paths when MTU greater than 1500 is configured.  So display a
+	 * warning that legacy VFs will be disabled.
+	 */
+	if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) &&
+	    (adapter->hw.mac.type == ixgbe_mac_82599EB) &&
+	    (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)))
+		e_warn(probe, "Setting MTU > 1500 will disable legacy VFs\n");
+
+	e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+
+	/* must set new MTU before calling down or up */
+	netdev->mtu = new_mtu;
+
+	if (netif_running(netdev))
+		ixgbe_reinit_locked(adapter);
+
+	return 0;
+}
+
+/**
+ * ixgbe_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP).  At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int ixgbe_open(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	int err, queues;
+
+	/* disallow open during test */
+	if (test_bit(__IXGBE_TESTING, &adapter->state))
+		return -EBUSY;
+
+	netif_carrier_off(netdev);
+
+	/* allocate transmit descriptors */
+	err = ixgbe_setup_all_tx_resources(adapter);
+	if (err)
+		goto err_setup_tx;
+
+	/* allocate receive descriptors */
+	err = ixgbe_setup_all_rx_resources(adapter);
+	if (err)
+		goto err_setup_rx;
+
+	ixgbe_configure(adapter);
+
+	err = ixgbe_request_irq(adapter);
+	if (err)
+		goto err_req_irq;
+
+	/* Notify the stack of the actual queue counts. */
+	if (adapter->num_rx_pools > 1)
+		queues = adapter->num_rx_queues_per_pool;
+	else
+		queues = adapter->num_tx_queues;
+
+	err = netif_set_real_num_tx_queues(netdev, queues);
+	if (err)
+		goto err_set_queues;
+
+	if (adapter->num_rx_pools > 1 &&
+	    adapter->num_rx_queues > IXGBE_MAX_L2A_QUEUES)
+		queues = IXGBE_MAX_L2A_QUEUES;
+	else
+		queues = adapter->num_rx_queues;
+	err = netif_set_real_num_rx_queues(netdev, queues);
+	if (err)
+		goto err_set_queues;
+
+	ixgbe_ptp_init(adapter);
+
+	ixgbe_up_complete(adapter);
+
+#if IS_ENABLED(CONFIG_IXGBE_VXLAN)
+	vxlan_get_rx_port(netdev);
+
+#endif
+	return 0;
+
+err_set_queues:
+	ixgbe_free_irq(adapter);
+err_req_irq:
+	ixgbe_free_all_rx_resources(adapter);
+err_setup_rx:
+	ixgbe_free_all_tx_resources(adapter);
+err_setup_tx:
+	ixgbe_reset(adapter);
+
+	return err;
+}
+
+static void ixgbe_close_suspend(struct ixgbe_adapter *adapter)
+{
+	ixgbe_ptp_suspend(adapter);
+
+	ixgbe_down(adapter);
+	ixgbe_free_irq(adapter);
+
+	ixgbe_free_all_tx_resources(adapter);
+	ixgbe_free_all_rx_resources(adapter);
+}
+
+/**
+ * ixgbe_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.  The hardware is still under the drivers control, but
+ * needs to be disabled.  A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int ixgbe_close(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	ixgbe_ptp_stop(adapter);
+
+	ixgbe_close_suspend(adapter);
+
+	ixgbe_fdir_filter_exit(adapter);
+
+	ixgbe_release_hw_control(adapter);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ixgbe_resume(struct pci_dev *pdev)
+{
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
+	u32 err;
+
+	adapter->hw.hw_addr = adapter->io_addr;
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	/*
+	 * pci_restore_state clears dev->state_saved so call
+	 * pci_save_state to restore it.
+	 */
+	pci_save_state(pdev);
+
+	err = pci_enable_device_mem(pdev);
+	if (err) {
+		e_dev_err("Cannot enable PCI device from suspend\n");
+		return err;
+	}
+	smp_mb__before_atomic();
+	clear_bit(__IXGBE_DISABLED, &adapter->state);
+	pci_set_master(pdev);
+
+	pci_wake_from_d3(pdev, false);
+
+	ixgbe_reset(adapter);
+
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+
+	rtnl_lock();
+	err = ixgbe_init_interrupt_scheme(adapter);
+	if (!err && netif_running(netdev))
+		err = ixgbe_open(netdev);
+
+	rtnl_unlock();
+
+	if (err)
+		return err;
+
+	netif_device_attach(netdev);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 ctrl, fctrl;
+	u32 wufc = adapter->wol;
+#ifdef CONFIG_PM
+	int retval = 0;
+#endif
+
+	netif_device_detach(netdev);
+
+	rtnl_lock();
+	if (netif_running(netdev))
+		ixgbe_close_suspend(adapter);
+	rtnl_unlock();
+
+	ixgbe_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PM
+	retval = pci_save_state(pdev);
+	if (retval)
+		return retval;
+
+#endif
+	if (hw->mac.ops.stop_link_on_d3)
+		hw->mac.ops.stop_link_on_d3(hw);
+
+	if (wufc) {
+		ixgbe_set_rx_mode(netdev);
+
+		/* enable the optics for 82599 SFP+ fiber as we can WoL */
+		if (hw->mac.ops.enable_tx_laser)
+			hw->mac.ops.enable_tx_laser(hw);
+
+		/* turn on all-multi mode if wake on multicast is enabled */
+		if (wufc & IXGBE_WUFC_MC) {
+			fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+			fctrl |= IXGBE_FCTRL_MPE;
+			IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+		}
+
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		ctrl |= IXGBE_CTRL_GIO_DIS;
+		IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+
+		IXGBE_WRITE_REG(hw, IXGBE_WUFC, wufc);
+	} else {
+		IXGBE_WRITE_REG(hw, IXGBE_WUC, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0);
+	}
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		pci_wake_from_d3(pdev, false);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		pci_wake_from_d3(pdev, !!wufc);
+		break;
+	default:
+		break;
+	}
+
+	*enable_wake = !!wufc;
+
+	ixgbe_release_hw_control(adapter);
+
+	if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	int retval;
+	bool wake;
+
+	retval = __ixgbe_shutdown(pdev, &wake);
+	if (retval)
+		return retval;
+
+	if (wake) {
+		pci_prepare_to_sleep(pdev);
+	} else {
+		pci_wake_from_d3(pdev, false);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static void ixgbe_shutdown(struct pci_dev *pdev)
+{
+	bool wake;
+
+	__ixgbe_shutdown(pdev, &wake);
+
+	if (system_state == SYSTEM_POWER_OFF) {
+		pci_wake_from_d3(pdev, wake);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+}
+
+/**
+ * ixgbe_update_stats - Update the board statistics counters.
+ * @adapter: board private structure
+ **/
+void ixgbe_update_stats(struct ixgbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_hw_stats *hwstats = &adapter->stats;
+	u64 total_mpc = 0;
+	u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
+	u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0;
+	u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0;
+	u64 bytes = 0, packets = 0, hw_csum_rx_error = 0;
+
+	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+	    test_bit(__IXGBE_RESETTING, &adapter->state))
+		return;
+
+	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
+		u64 rsc_count = 0;
+		u64 rsc_flush = 0;
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			rsc_count += adapter->rx_ring[i]->rx_stats.rsc_count;
+			rsc_flush += adapter->rx_ring[i]->rx_stats.rsc_flush;
+		}
+		adapter->rsc_total_count = rsc_count;
+		adapter->rsc_total_flush = rsc_flush;
+	}
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		struct ixgbe_ring *rx_ring = adapter->rx_ring[i];
+		non_eop_descs += rx_ring->rx_stats.non_eop_descs;
+		alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed;
+		alloc_rx_buff_failed += rx_ring->rx_stats.alloc_rx_buff_failed;
+		hw_csum_rx_error += rx_ring->rx_stats.csum_err;
+		bytes += rx_ring->stats.bytes;
+		packets += rx_ring->stats.packets;
+	}
+	adapter->non_eop_descs = non_eop_descs;
+	adapter->alloc_rx_page_failed = alloc_rx_page_failed;
+	adapter->alloc_rx_buff_failed = alloc_rx_buff_failed;
+	adapter->hw_csum_rx_error = hw_csum_rx_error;
+	netdev->stats.rx_bytes = bytes;
+	netdev->stats.rx_packets = packets;
+
+	bytes = 0;
+	packets = 0;
+	/* gather some stats to the adapter struct that are per queue */
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
+		restart_queue += tx_ring->tx_stats.restart_queue;
+		tx_busy += tx_ring->tx_stats.tx_busy;
+		bytes += tx_ring->stats.bytes;
+		packets += tx_ring->stats.packets;
+	}
+	adapter->restart_queue = restart_queue;
+	adapter->tx_busy = tx_busy;
+	netdev->stats.tx_bytes = bytes;
+	netdev->stats.tx_packets = packets;
+
+	hwstats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
+
+	/* 8 register reads */
+	for (i = 0; i < 8; i++) {
+		/* for packet buffers not used, the register should read 0 */
+		mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i));
+		missed_rx += mpc;
+		hwstats->mpc[i] += mpc;
+		total_mpc += hwstats->mpc[i];
+		hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
+		hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
+			hwstats->rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i));
+			hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i));
+			hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i));
+			hwstats->pxonrxc[i] +=
+				IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
+			break;
+		case ixgbe_mac_82599EB:
+		case ixgbe_mac_X540:
+		case ixgbe_mac_X550:
+		case ixgbe_mac_X550EM_x:
+			hwstats->pxonrxc[i] +=
+				IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
+			break;
+		default:
+			break;
+		}
+	}
+
+	/*16 register reads */
+	for (i = 0; i < 16; i++) {
+		hwstats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i));
+		hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i));
+		if ((hw->mac.type == ixgbe_mac_82599EB) ||
+		    (hw->mac.type == ixgbe_mac_X540) ||
+		    (hw->mac.type == ixgbe_mac_X550) ||
+		    (hw->mac.type == ixgbe_mac_X550EM_x)) {
+			hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC_L(i));
+			IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); /* to clear */
+			hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC_L(i));
+			IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); /* to clear */
+		}
+	}
+
+	hwstats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC);
+	/* work around hardware counting issue */
+	hwstats->gprc -= missed_rx;
+
+	ixgbe_update_xoff_received(adapter);
+
+	/* 82598 hardware only has a 32 bit counter in the high register */
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
+		hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH);
+		hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
+		hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH);
+		break;
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		/* OS2BMC stats are X540 and later */
+		hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC);
+		hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC);
+		hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC);
+		hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC);
+	case ixgbe_mac_82599EB:
+		for (i = 0; i < 16; i++)
+			adapter->hw_rx_no_dma_resources +=
+					     IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
+		hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
+		IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */
+		hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
+		IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */
+		hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORL);
+		IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */
+		hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
+		hwstats->fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+		hwstats->fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+#ifdef IXGBE_FCOE
+		hwstats->fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC);
+		hwstats->fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC);
+		hwstats->fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC);
+		hwstats->fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC);
+		hwstats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
+		hwstats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
+		/* Add up per cpu counters for total ddp aloc fail */
+		if (adapter->fcoe.ddp_pool) {
+			struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+			struct ixgbe_fcoe_ddp_pool *ddp_pool;
+			unsigned int cpu;
+			u64 noddp = 0, noddp_ext_buff = 0;
+			for_each_possible_cpu(cpu) {
+				ddp_pool = per_cpu_ptr(fcoe->ddp_pool, cpu);
+				noddp += ddp_pool->noddp;
+				noddp_ext_buff += ddp_pool->noddp_ext_buff;
+			}
+			hwstats->fcoe_noddp = noddp;
+			hwstats->fcoe_noddp_ext_buff = noddp_ext_buff;
+		}
+#endif /* IXGBE_FCOE */
+		break;
+	default:
+		break;
+	}
+	bprc = IXGBE_READ_REG(hw, IXGBE_BPRC);
+	hwstats->bprc += bprc;
+	hwstats->mprc += IXGBE_READ_REG(hw, IXGBE_MPRC);
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		hwstats->mprc -= bprc;
+	hwstats->roc += IXGBE_READ_REG(hw, IXGBE_ROC);
+	hwstats->prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64);
+	hwstats->prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127);
+	hwstats->prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255);
+	hwstats->prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511);
+	hwstats->prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023);
+	hwstats->prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522);
+	hwstats->rlec += IXGBE_READ_REG(hw, IXGBE_RLEC);
+	lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC);
+	hwstats->lxontxc += lxon;
+	lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
+	hwstats->lxofftxc += lxoff;
+	hwstats->gptc += IXGBE_READ_REG(hw, IXGBE_GPTC);
+	hwstats->mptc += IXGBE_READ_REG(hw, IXGBE_MPTC);
+	/*
+	 * 82598 errata - tx of flow control packets is included in tx counters
+	 */
+	xon_off_tot = lxon + lxoff;
+	hwstats->gptc -= xon_off_tot;
+	hwstats->mptc -= xon_off_tot;
+	hwstats->gotc -= (xon_off_tot * (ETH_ZLEN + ETH_FCS_LEN));
+	hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
+	hwstats->rfc += IXGBE_READ_REG(hw, IXGBE_RFC);
+	hwstats->rjc += IXGBE_READ_REG(hw, IXGBE_RJC);
+	hwstats->tpr += IXGBE_READ_REG(hw, IXGBE_TPR);
+	hwstats->ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64);
+	hwstats->ptc64 -= xon_off_tot;
+	hwstats->ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127);
+	hwstats->ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255);
+	hwstats->ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511);
+	hwstats->ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023);
+	hwstats->ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522);
+	hwstats->bptc += IXGBE_READ_REG(hw, IXGBE_BPTC);
+
+	/* Fill out the OS statistics structure */
+	netdev->stats.multicast = hwstats->mprc;
+
+	/* Rx Errors */
+	netdev->stats.rx_errors = hwstats->crcerrs + hwstats->rlec;
+	netdev->stats.rx_dropped = 0;
+	netdev->stats.rx_length_errors = hwstats->rlec;
+	netdev->stats.rx_crc_errors = hwstats->crcerrs;
+	netdev->stats.rx_missed_errors = total_mpc;
+}
+
+/**
+ * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table
+ * @adapter: pointer to the device adapter structure
+ **/
+static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i;
+
+	if (!(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT))
+		return;
+
+	adapter->flags2 &= ~IXGBE_FLAG2_FDIR_REQUIRES_REINIT;
+
+	/* if interface is down do nothing */
+	if (test_bit(__IXGBE_DOWN, &adapter->state))
+		return;
+
+	/* do nothing if we are not using signature filters */
+	if (!(adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE))
+		return;
+
+	adapter->fdir_overflow++;
+
+	if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			set_bit(__IXGBE_TX_FDIR_INIT_DONE,
+				&(adapter->tx_ring[i]->state));
+		/* re-enable flow director interrupts */
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_FLOW_DIR);
+	} else {
+		e_err(probe, "failed to finish FDIR re-initialization, "
+		      "ignored adding FDIR ATR filters\n");
+	}
+}
+
+/**
+ * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts
+ * @adapter: pointer to the device adapter structure
+ *
+ * This function serves two purposes.  First it strobes the interrupt lines
+ * in order to make certain interrupts are occurring.  Secondly it sets the
+ * bits needed to check for TX hangs.  As a result we should immediately
+ * determine if a hang has occurred.
+ */
+static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u64 eics = 0;
+	int i;
+
+	/* If we're down, removing or resetting, just bail */
+	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+	    test_bit(__IXGBE_REMOVING, &adapter->state) ||
+	    test_bit(__IXGBE_RESETTING, &adapter->state))
+		return;
+
+	/* Force detection of hung controller */
+	if (netif_carrier_ok(adapter->netdev)) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			set_check_for_tx_hang(adapter->tx_ring[i]);
+	}
+
+	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
+		/*
+		 * for legacy and MSI interrupts don't set any bits
+		 * that are enabled for EIAM, because this operation
+		 * would set *both* EIMS and EICS for any bit in EIAM
+		 */
+		IXGBE_WRITE_REG(hw, IXGBE_EICS,
+			(IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
+	} else {
+		/* get one bit for every active tx/rx interrupt vector */
+		for (i = 0; i < adapter->num_q_vectors; i++) {
+			struct ixgbe_q_vector *qv = adapter->q_vector[i];
+			if (qv->rx.ring || qv->tx.ring)
+				eics |= ((u64)1 << i);
+		}
+	}
+
+	/* Cause software interrupt to ensure rings are cleaned */
+	ixgbe_irq_rearm_queues(adapter, eics);
+}
+
+/**
+ * ixgbe_watchdog_update_link - update the link status
+ * @adapter: pointer to the device adapter structure
+ * @link_speed: pointer to a u32 to store the link_speed
+ **/
+static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 link_speed = adapter->link_speed;
+	bool link_up = adapter->link_up;
+	bool pfc_en = adapter->dcb_cfg.pfc_mode_enable;
+
+	if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE))
+		return;
+
+	if (hw->mac.ops.check_link) {
+		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+	} else {
+		/* always assume link is up, if no check link function */
+		link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+		link_up = true;
+	}
+
+	if (adapter->ixgbe_ieee_pfc)
+		pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en);
+
+	if (link_up && !((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && pfc_en)) {
+		hw->mac.ops.fc_enable(hw);
+		ixgbe_set_rx_drop_en(adapter);
+	}
+
+	if (link_up ||
+	    time_after(jiffies, (adapter->link_check_timeout +
+				 IXGBE_TRY_LINK_TIMEOUT))) {
+		adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+
+	adapter->link_up = link_up;
+	adapter->link_speed = link_speed;
+}
+
+static void ixgbe_update_default_up(struct ixgbe_adapter *adapter)
+{
+#ifdef CONFIG_IXGBE_DCB
+	struct net_device *netdev = adapter->netdev;
+	struct dcb_app app = {
+			      .selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE,
+			      .protocol = 0,
+			     };
+	u8 up = 0;
+
+	if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)
+		up = dcb_ieee_getapp_mask(netdev, &app);
+
+	adapter->default_up = (up > 1) ? (ffs(up) - 1) : 0;
+#endif
+}
+
+/**
+ * ixgbe_watchdog_link_is_up - update netif_carrier status and
+ *                             print link up message
+ * @adapter: pointer to the device adapter structure
+ **/
+static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct net_device *upper;
+	struct list_head *iter;
+	u32 link_speed = adapter->link_speed;
+	bool flow_rx, flow_tx;
+
+	/* only continue if link was previously down */
+	if (netif_carrier_ok(netdev))
+		return;
+
+	adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB: {
+		u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+		u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS);
+		flow_rx = !!(frctl & IXGBE_FCTRL_RFCE);
+		flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
+	}
+		break;
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_82599EB: {
+		u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+		u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
+		flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE);
+		flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X);
+	}
+		break;
+	default:
+		flow_tx = false;
+		flow_rx = false;
+		break;
+	}
+
+	adapter->last_rx_ptp_check = jiffies;
+
+	if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state))
+		ixgbe_ptp_start_cyclecounter(adapter);
+
+	e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
+	       (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
+	       "10 Gbps" :
+	       (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
+	       "1 Gbps" :
+	       (link_speed == IXGBE_LINK_SPEED_100_FULL ?
+	       "100 Mbps" :
+	       "unknown speed"))),
+	       ((flow_rx && flow_tx) ? "RX/TX" :
+	       (flow_rx ? "RX" :
+	       (flow_tx ? "TX" : "None"))));
+
+	netif_carrier_on(netdev);
+	ixgbe_check_vf_rate_limit(adapter);
+
+	/* enable transmits */
+	netif_tx_wake_all_queues(adapter->netdev);
+
+	/* enable any upper devices */
+	rtnl_lock();
+	netdev_for_each_all_upper_dev_rcu(adapter->netdev, upper, iter) {
+		if (netif_is_macvlan(upper)) {
+			struct macvlan_dev *vlan = netdev_priv(upper);
+
+			if (vlan->fwd_priv)
+				netif_tx_wake_all_queues(upper);
+		}
+	}
+	rtnl_unlock();
+
+	/* update the default user priority for VFs */
+	ixgbe_update_default_up(adapter);
+
+	/* ping all the active vfs to let them know link has changed */
+	ixgbe_ping_all_vfs(adapter);
+}
+
+/**
+ * ixgbe_watchdog_link_is_down - update netif_carrier status and
+ *                               print link down message
+ * @adapter: pointer to the adapter structure
+ **/
+static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	adapter->link_up = false;
+	adapter->link_speed = 0;
+
+	/* only continue if link was up previously */
+	if (!netif_carrier_ok(netdev))
+		return;
+
+	/* poll for SFP+ cable when link is down */
+	if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB)
+		adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP;
+
+	if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state))
+		ixgbe_ptp_start_cyclecounter(adapter);
+
+	e_info(drv, "NIC Link is Down\n");
+	netif_carrier_off(netdev);
+
+	/* ping all the active vfs to let them know link has changed */
+	ixgbe_ping_all_vfs(adapter);
+}
+
+static bool ixgbe_ring_tx_pending(struct ixgbe_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
+
+		if (tx_ring->next_to_use != tx_ring->next_to_clean)
+			return true;
+	}
+
+	return false;
+}
+
+static bool ixgbe_vf_tx_pending(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
+	u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
+
+	int i, j;
+
+	if (!adapter->num_vfs)
+		return false;
+
+	/* resetting the PF is only needed for MAC before X550 */
+	if (hw->mac.type >= ixgbe_mac_X550)
+		return false;
+
+	for (i = 0; i < adapter->num_vfs; i++) {
+		for (j = 0; j < q_per_pool; j++) {
+			u32 h, t;
+
+			h = IXGBE_READ_REG(hw, IXGBE_PVFTDHN(q_per_pool, i, j));
+			t = IXGBE_READ_REG(hw, IXGBE_PVFTDTN(q_per_pool, i, j));
+
+			if (h != t)
+				return true;
+		}
+	}
+
+	return false;
+}
+
+/**
+ * ixgbe_watchdog_flush_tx - flush queues on link down
+ * @adapter: pointer to the device adapter structure
+ **/
+static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter)
+{
+	if (!netif_carrier_ok(adapter->netdev)) {
+		if (ixgbe_ring_tx_pending(adapter) ||
+		    ixgbe_vf_tx_pending(adapter)) {
+			/* We've lost link, so the controller stops DMA,
+			 * but we've got queued Tx work that's never going
+			 * to get done, so reset controller to flush Tx.
+			 * (Do the reset outside of interrupt context).
+			 */
+			e_warn(drv, "initiating reset to clear Tx work after link loss\n");
+			adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+		}
+	}
+}
+
+#ifdef CONFIG_PCI_IOV
+static inline void ixgbe_issue_vf_flr(struct ixgbe_adapter *adapter,
+				      struct pci_dev *vfdev)
+{
+	if (!pci_wait_for_pending_transaction(vfdev))
+		e_dev_warn("Issuing VFLR with pending transactions\n");
+
+	e_dev_err("Issuing VFLR for VF %s\n", pci_name(vfdev));
+	pcie_capability_set_word(vfdev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
+
+	msleep(100);
+}
+
+static void ixgbe_check_for_bad_vf(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+	struct pci_dev *vfdev;
+	u32 gpc;
+	int pos;
+	unsigned short vf_id;
+
+	if (!(netif_carrier_ok(adapter->netdev)))
+		return;
+
+	gpc = IXGBE_READ_REG(hw, IXGBE_TXDGPC);
+	if (gpc) /* If incrementing then no need for the check below */
+		return;
+	/* Check to see if a bad DMA write target from an errant or
+	 * malicious VF has caused a PCIe error.  If so then we can
+	 * issue a VFLR to the offending VF(s) and then resume without
+	 * requesting a full slot reset.
+	 */
+
+	if (!pdev)
+		return;
+
+	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
+	if (!pos)
+		return;
+
+	/* get the device ID for the VF */
+	pci_read_config_word(pdev, pos + PCI_SRIOV_VF_DID, &vf_id);
+
+	/* check status reg for all VFs owned by this PF */
+	vfdev = pci_get_device(pdev->vendor, vf_id, NULL);
+	while (vfdev) {
+		if (vfdev->is_virtfn && (vfdev->physfn == pdev)) {
+			u16 status_reg;
+
+			pci_read_config_word(vfdev, PCI_STATUS, &status_reg);
+			if (status_reg & PCI_STATUS_REC_MASTER_ABORT)
+				/* issue VFLR */
+				ixgbe_issue_vf_flr(adapter, vfdev);
+		}
+
+		vfdev = pci_get_device(pdev->vendor, vf_id, vfdev);
+	}
+}
+
+static void ixgbe_spoof_check(struct ixgbe_adapter *adapter)
+{
+	u32 ssvpc;
+
+	/* Do not perform spoof check for 82598 or if not in IOV mode */
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB ||
+	    adapter->num_vfs == 0)
+		return;
+
+	ssvpc = IXGBE_READ_REG(&adapter->hw, IXGBE_SSVPC);
+
+	/*
+	 * ssvpc register is cleared on read, if zero then no
+	 * spoofed packets in the last interval.
+	 */
+	if (!ssvpc)
+		return;
+
+	e_warn(drv, "%u Spoofed packets detected\n", ssvpc);
+}
+#else
+static void ixgbe_spoof_check(struct ixgbe_adapter __always_unused *adapter)
+{
+}
+
+static void
+ixgbe_check_for_bad_vf(struct ixgbe_adapter __always_unused *adapter)
+{
+}
+#endif /* CONFIG_PCI_IOV */
+
+
+/**
+ * ixgbe_watchdog_subtask - check and bring link up
+ * @adapter: pointer to the device adapter structure
+ **/
+static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter)
+{
+	/* if interface is down, removing or resetting, do nothing */
+	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+	    test_bit(__IXGBE_REMOVING, &adapter->state) ||
+	    test_bit(__IXGBE_RESETTING, &adapter->state))
+		return;
+
+	ixgbe_watchdog_update_link(adapter);
+
+	if (adapter->link_up)
+		ixgbe_watchdog_link_is_up(adapter);
+	else
+		ixgbe_watchdog_link_is_down(adapter);
+
+	ixgbe_check_for_bad_vf(adapter);
+	ixgbe_spoof_check(adapter);
+	ixgbe_update_stats(adapter);
+
+	ixgbe_watchdog_flush_tx(adapter);
+}
+
+/**
+ * ixgbe_sfp_detection_subtask - poll for SFP+ cable
+ * @adapter: the ixgbe adapter structure
+ **/
+static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	s32 err;
+
+	/* not searching for SFP so there is nothing to do here */
+	if (!(adapter->flags2 & IXGBE_FLAG2_SEARCH_FOR_SFP) &&
+	    !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET))
+		return;
+
+	/* someone else is in init, wait until next service event */
+	if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+		return;
+
+	err = hw->phy.ops.identify_sfp(hw);
+	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto sfp_out;
+
+	if (err == IXGBE_ERR_SFP_NOT_PRESENT) {
+		/* If no cable is present, then we need to reset
+		 * the next time we find a good cable. */
+		adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
+	}
+
+	/* exit on error */
+	if (err)
+		goto sfp_out;
+
+	/* exit if reset not needed */
+	if (!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET))
+		goto sfp_out;
+
+	adapter->flags2 &= ~IXGBE_FLAG2_SFP_NEEDS_RESET;
+
+	/*
+	 * A module may be identified correctly, but the EEPROM may not have
+	 * support for that module.  setup_sfp() will fail in that case, so
+	 * we should not allow that module to load.
+	 */
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		err = hw->phy.ops.reset(hw);
+	else
+		err = hw->mac.ops.setup_sfp(hw);
+
+	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto sfp_out;
+
+	adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+	e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
+
+sfp_out:
+	clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+
+	if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) &&
+	    (adapter->netdev->reg_state == NETREG_REGISTERED)) {
+		e_dev_err("failed to initialize because an unsupported "
+			  "SFP+ module type was detected.\n");
+		e_dev_err("Reload the driver after installing a "
+			  "supported module.\n");
+		unregister_netdev(adapter->netdev);
+	}
+}
+
+/**
+ * ixgbe_sfp_link_config_subtask - set up link SFP after module install
+ * @adapter: the ixgbe adapter structure
+ **/
+static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 speed;
+	bool autoneg = false;
+
+	if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG))
+		return;
+
+	/* someone else is in init, wait until next service event */
+	if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+		return;
+
+	adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
+
+	speed = hw->phy.autoneg_advertised;
+	if ((!speed) && (hw->mac.ops.get_link_capabilities)) {
+		hw->mac.ops.get_link_capabilities(hw, &speed, &autoneg);
+
+		/* setup the highest link when no autoneg */
+		if (!autoneg) {
+			if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+				speed = IXGBE_LINK_SPEED_10GB_FULL;
+		}
+	}
+
+	if (hw->mac.ops.setup_link)
+		hw->mac.ops.setup_link(hw, speed, true);
+
+	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
+	adapter->link_check_timeout = jiffies;
+	clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+}
+
+/**
+ * ixgbe_service_timer - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void ixgbe_service_timer(unsigned long data)
+{
+	struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
+	unsigned long next_event_offset;
+
+	/* poll faster when waiting for link */
+	if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)
+		next_event_offset = HZ / 10;
+	else
+		next_event_offset = HZ * 2;
+
+	/* Reset the timer */
+	mod_timer(&adapter->service_timer, next_event_offset + jiffies);
+
+	ixgbe_service_event_schedule(adapter);
+}
+
+static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter)
+{
+	if (!(adapter->flags2 & IXGBE_FLAG2_RESET_REQUESTED))
+		return;
+
+	adapter->flags2 &= ~IXGBE_FLAG2_RESET_REQUESTED;
+
+	/* If we're already down, removing or resetting, just bail */
+	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+	    test_bit(__IXGBE_REMOVING, &adapter->state) ||
+	    test_bit(__IXGBE_RESETTING, &adapter->state))
+		return;
+
+	ixgbe_dump(adapter);
+	netdev_err(adapter->netdev, "Reset adapter\n");
+	adapter->tx_timeout_count++;
+
+	rtnl_lock();
+	ixgbe_reinit_locked(adapter);
+	rtnl_unlock();
+}
+
+/**
+ * ixgbe_service_task - manages and runs subtasks
+ * @work: pointer to work_struct containing our data
+ **/
+static void ixgbe_service_task(struct work_struct *work)
+{
+	struct ixgbe_adapter *adapter = container_of(work,
+						     struct ixgbe_adapter,
+						     service_task);
+	if (ixgbe_removed(adapter->hw.hw_addr)) {
+		if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+			rtnl_lock();
+			ixgbe_down(adapter);
+			rtnl_unlock();
+		}
+		ixgbe_service_event_complete(adapter);
+		return;
+	}
+	ixgbe_reset_subtask(adapter);
+	ixgbe_sfp_detection_subtask(adapter);
+	ixgbe_sfp_link_config_subtask(adapter);
+	ixgbe_check_overtemp_subtask(adapter);
+	ixgbe_watchdog_subtask(adapter);
+	ixgbe_fdir_reinit_subtask(adapter);
+	ixgbe_check_hang_subtask(adapter);
+
+	if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) {
+		ixgbe_ptp_overflow_check(adapter);
+		ixgbe_ptp_rx_hang(adapter);
+	}
+
+	ixgbe_service_event_complete(adapter);
+}
+
+static int ixgbe_tso(struct ixgbe_ring *tx_ring,
+		     struct ixgbe_tx_buffer *first,
+		     u8 *hdr_len)
+{
+	struct sk_buff *skb = first->skb;
+	u32 vlan_macip_lens, type_tucmd;
+	u32 mss_l4len_idx, l4len;
+	int err;
+
+	if (skb->ip_summed != CHECKSUM_PARTIAL)
+		return 0;
+
+	if (!skb_is_gso(skb))
+		return 0;
+
+	err = skb_cow_head(skb, 0);
+	if (err < 0)
+		return err;
+
+	/* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+	type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP;
+
+	if (first->protocol == htons(ETH_P_IP)) {
+		struct iphdr *iph = ip_hdr(skb);
+		iph->tot_len = 0;
+		iph->check = 0;
+		tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+							 iph->daddr, 0,
+							 IPPROTO_TCP,
+							 0);
+		type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4;
+		first->tx_flags |= IXGBE_TX_FLAGS_TSO |
+				   IXGBE_TX_FLAGS_CSUM |
+				   IXGBE_TX_FLAGS_IPV4;
+	} else if (skb_is_gso_v6(skb)) {
+		ipv6_hdr(skb)->payload_len = 0;
+		tcp_hdr(skb)->check =
+		    ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+				     &ipv6_hdr(skb)->daddr,
+				     0, IPPROTO_TCP, 0);
+		first->tx_flags |= IXGBE_TX_FLAGS_TSO |
+				   IXGBE_TX_FLAGS_CSUM;
+	}
+
+	/* compute header lengths */
+	l4len = tcp_hdrlen(skb);
+	*hdr_len = skb_transport_offset(skb) + l4len;
+
+	/* update gso size and bytecount with header size */
+	first->gso_segs = skb_shinfo(skb)->gso_segs;
+	first->bytecount += (first->gso_segs - 1) * *hdr_len;
+
+	/* mss_l4len_id: use 0 as index for TSO */
+	mss_l4len_idx = l4len << IXGBE_ADVTXD_L4LEN_SHIFT;
+	mss_l4len_idx |= skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT;
+
+	/* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
+	vlan_macip_lens = skb_network_header_len(skb);
+	vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT;
+	vlan_macip_lens |= first->tx_flags & IXGBE_TX_FLAGS_VLAN_MASK;
+
+	ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, type_tucmd,
+			  mss_l4len_idx);
+
+	return 1;
+}
+
+static void ixgbe_tx_csum(struct ixgbe_ring *tx_ring,
+			  struct ixgbe_tx_buffer *first)
+{
+	struct sk_buff *skb = first->skb;
+	u32 vlan_macip_lens = 0;
+	u32 mss_l4len_idx = 0;
+	u32 type_tucmd = 0;
+
+	if (skb->ip_summed != CHECKSUM_PARTIAL) {
+		if (!(first->tx_flags & IXGBE_TX_FLAGS_HW_VLAN) &&
+		    !(first->tx_flags & IXGBE_TX_FLAGS_CC))
+			return;
+	} else {
+		u8 l4_hdr = 0;
+		switch (first->protocol) {
+		case htons(ETH_P_IP):
+			vlan_macip_lens |= skb_network_header_len(skb);
+			type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4;
+			l4_hdr = ip_hdr(skb)->protocol;
+			break;
+		case htons(ETH_P_IPV6):
+			vlan_macip_lens |= skb_network_header_len(skb);
+			l4_hdr = ipv6_hdr(skb)->nexthdr;
+			break;
+		default:
+			if (unlikely(net_ratelimit())) {
+				dev_warn(tx_ring->dev,
+				 "partial checksum but proto=%x!\n",
+				 first->protocol);
+			}
+			break;
+		}
+
+		switch (l4_hdr) {
+		case IPPROTO_TCP:
+			type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
+			mss_l4len_idx = tcp_hdrlen(skb) <<
+					IXGBE_ADVTXD_L4LEN_SHIFT;
+			break;
+		case IPPROTO_SCTP:
+			type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_SCTP;
+			mss_l4len_idx = sizeof(struct sctphdr) <<
+					IXGBE_ADVTXD_L4LEN_SHIFT;
+			break;
+		case IPPROTO_UDP:
+			mss_l4len_idx = sizeof(struct udphdr) <<
+					IXGBE_ADVTXD_L4LEN_SHIFT;
+			break;
+		default:
+			if (unlikely(net_ratelimit())) {
+				dev_warn(tx_ring->dev,
+				 "partial checksum but l4 proto=%x!\n",
+				 l4_hdr);
+			}
+			break;
+		}
+
+		/* update TX checksum flag */
+		first->tx_flags |= IXGBE_TX_FLAGS_CSUM;
+	}
+
+	/* vlan_macip_lens: MACLEN, VLAN tag */
+	vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT;
+	vlan_macip_lens |= first->tx_flags & IXGBE_TX_FLAGS_VLAN_MASK;
+
+	ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0,
+			  type_tucmd, mss_l4len_idx);
+}
+
+#define IXGBE_SET_FLAG(_input, _flag, _result) \
+	((_flag <= _result) ? \
+	 ((u32)(_input & _flag) * (_result / _flag)) : \
+	 ((u32)(_input & _flag) / (_flag / _result)))
+
+static u32 ixgbe_tx_cmd_type(struct sk_buff *skb, u32 tx_flags)
+{
+	/* set type for advanced descriptor with frame checksum insertion */
+	u32 cmd_type = IXGBE_ADVTXD_DTYP_DATA |
+		       IXGBE_ADVTXD_DCMD_DEXT |
+		       IXGBE_ADVTXD_DCMD_IFCS;
+
+	/* set HW vlan bit if vlan is present */
+	cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_HW_VLAN,
+				   IXGBE_ADVTXD_DCMD_VLE);
+
+	/* set segmentation enable bits for TSO/FSO */
+	cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_TSO,
+				   IXGBE_ADVTXD_DCMD_TSE);
+
+	/* set timestamp bit if present */
+	cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_TSTAMP,
+				   IXGBE_ADVTXD_MAC_TSTAMP);
+
+	/* insert frame checksum */
+	cmd_type ^= IXGBE_SET_FLAG(skb->no_fcs, 1, IXGBE_ADVTXD_DCMD_IFCS);
+
+	return cmd_type;
+}
+
+static void ixgbe_tx_olinfo_status(union ixgbe_adv_tx_desc *tx_desc,
+				   u32 tx_flags, unsigned int paylen)
+{
+	u32 olinfo_status = paylen << IXGBE_ADVTXD_PAYLEN_SHIFT;
+
+	/* enable L4 checksum for TSO and TX checksum offload */
+	olinfo_status |= IXGBE_SET_FLAG(tx_flags,
+					IXGBE_TX_FLAGS_CSUM,
+					IXGBE_ADVTXD_POPTS_TXSM);
+
+	/* enble IPv4 checksum for TSO */
+	olinfo_status |= IXGBE_SET_FLAG(tx_flags,
+					IXGBE_TX_FLAGS_IPV4,
+					IXGBE_ADVTXD_POPTS_IXSM);
+
+	/*
+	 * Check Context must be set if Tx switch is enabled, which it
+	 * always is for case where virtual functions are running
+	 */
+	olinfo_status |= IXGBE_SET_FLAG(tx_flags,
+					IXGBE_TX_FLAGS_CC,
+					IXGBE_ADVTXD_CC);
+
+	tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+}
+
+static int __ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size)
+{
+	netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
+
+	/* Herbert's original patch had:
+	 *  smp_mb__after_netif_stop_queue();
+	 * but since that doesn't exist yet, just open code it.
+	 */
+	smp_mb();
+
+	/* We need to check again in a case another CPU has just
+	 * made room available.
+	 */
+	if (likely(ixgbe_desc_unused(tx_ring) < size))
+		return -EBUSY;
+
+	/* A reprieve! - use start_queue because it doesn't call schedule */
+	netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index);
+	++tx_ring->tx_stats.restart_queue;
+	return 0;
+}
+
+static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size)
+{
+	if (likely(ixgbe_desc_unused(tx_ring) >= size))
+		return 0;
+
+	return __ixgbe_maybe_stop_tx(tx_ring, size);
+}
+
+#define IXGBE_TXD_CMD (IXGBE_TXD_CMD_EOP | \
+		       IXGBE_TXD_CMD_RS)
+
+static void ixgbe_tx_map(struct ixgbe_ring *tx_ring,
+			 struct ixgbe_tx_buffer *first,
+			 const u8 hdr_len)
+{
+	struct sk_buff *skb = first->skb;
+	struct ixgbe_tx_buffer *tx_buffer;
+	union ixgbe_adv_tx_desc *tx_desc;
+	struct skb_frag_struct *frag;
+	dma_addr_t dma;
+	unsigned int data_len, size;
+	u32 tx_flags = first->tx_flags;
+	u32 cmd_type = ixgbe_tx_cmd_type(skb, tx_flags);
+	u16 i = tx_ring->next_to_use;
+
+	tx_desc = IXGBE_TX_DESC(tx_ring, i);
+
+	ixgbe_tx_olinfo_status(tx_desc, tx_flags, skb->len - hdr_len);
+
+	size = skb_headlen(skb);
+	data_len = skb->data_len;
+
+#ifdef IXGBE_FCOE
+	if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
+		if (data_len < sizeof(struct fcoe_crc_eof)) {
+			size -= sizeof(struct fcoe_crc_eof) - data_len;
+			data_len = 0;
+		} else {
+			data_len -= sizeof(struct fcoe_crc_eof);
+		}
+	}
+
+#endif
+	dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
+
+	tx_buffer = first;
+
+	for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
+		if (dma_mapping_error(tx_ring->dev, dma))
+			goto dma_error;
+
+		/* record length, and DMA address */
+		dma_unmap_len_set(tx_buffer, len, size);
+		dma_unmap_addr_set(tx_buffer, dma, dma);
+
+		tx_desc->read.buffer_addr = cpu_to_le64(dma);
+
+		while (unlikely(size > IXGBE_MAX_DATA_PER_TXD)) {
+			tx_desc->read.cmd_type_len =
+				cpu_to_le32(cmd_type ^ IXGBE_MAX_DATA_PER_TXD);
+
+			i++;
+			tx_desc++;
+			if (i == tx_ring->count) {
+				tx_desc = IXGBE_TX_DESC(tx_ring, 0);
+				i = 0;
+			}
+			tx_desc->read.olinfo_status = 0;
+
+			dma += IXGBE_MAX_DATA_PER_TXD;
+			size -= IXGBE_MAX_DATA_PER_TXD;
+
+			tx_desc->read.buffer_addr = cpu_to_le64(dma);
+		}
+
+		if (likely(!data_len))
+			break;
+
+		tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size);
+
+		i++;
+		tx_desc++;
+		if (i == tx_ring->count) {
+			tx_desc = IXGBE_TX_DESC(tx_ring, 0);
+			i = 0;
+		}
+		tx_desc->read.olinfo_status = 0;
+
+#ifdef IXGBE_FCOE
+		size = min_t(unsigned int, data_len, skb_frag_size(frag));
+#else
+		size = skb_frag_size(frag);
+#endif
+		data_len -= size;
+
+		dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size,
+				       DMA_TO_DEVICE);
+
+		tx_buffer = &tx_ring->tx_buffer_info[i];
+	}
+
+	/* write last descriptor with RS and EOP bits */
+	cmd_type |= size | IXGBE_TXD_CMD;
+	tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type);
+
+	netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
+
+	/* set the timestamp */
+	first->time_stamp = jiffies;
+
+	/*
+	 * Force memory writes to complete before letting h/w know there
+	 * are new descriptors to fetch.  (Only applicable for weak-ordered
+	 * memory model archs, such as IA-64).
+	 *
+	 * We also need this memory barrier to make certain all of the
+	 * status bits have been updated before next_to_watch is written.
+	 */
+	wmb();
+
+	/* set next_to_watch value indicating a packet is present */
+	first->next_to_watch = tx_desc;
+
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+
+	tx_ring->next_to_use = i;
+
+	ixgbe_maybe_stop_tx(tx_ring, DESC_NEEDED);
+
+	if (netif_xmit_stopped(txring_txq(tx_ring)) || !skb->xmit_more) {
+		writel(i, tx_ring->tail);
+
+		/* we need this if more than one processor can write to our tail
+		 * at a time, it synchronizes IO on IA64/Altix systems
+		 */
+		mmiowb();
+	}
+
+	return;
+dma_error:
+	dev_err(tx_ring->dev, "TX DMA map failed\n");
+
+	/* clear dma mappings for failed tx_buffer_info map */
+	for (;;) {
+		tx_buffer = &tx_ring->tx_buffer_info[i];
+		ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer);
+		if (tx_buffer == first)
+			break;
+		if (i == 0)
+			i = tx_ring->count;
+		i--;
+	}
+
+	tx_ring->next_to_use = i;
+}
+
+static void ixgbe_atr(struct ixgbe_ring *ring,
+		      struct ixgbe_tx_buffer *first)
+{
+	struct ixgbe_q_vector *q_vector = ring->q_vector;
+	union ixgbe_atr_hash_dword input = { .dword = 0 };
+	union ixgbe_atr_hash_dword common = { .dword = 0 };
+	union {
+		unsigned char *network;
+		struct iphdr *ipv4;
+		struct ipv6hdr *ipv6;
+	} hdr;
+	struct tcphdr *th;
+	__be16 vlan_id;
+
+	/* if ring doesn't have a interrupt vector, cannot perform ATR */
+	if (!q_vector)
+		return;
+
+	/* do nothing if sampling is disabled */
+	if (!ring->atr_sample_rate)
+		return;
+
+	ring->atr_count++;
+
+	/* snag network header to get L4 type and address */
+	hdr.network = skb_network_header(first->skb);
+
+	/* Currently only IPv4/IPv6 with TCP is supported */
+	if ((first->protocol != htons(ETH_P_IPV6) ||
+	     hdr.ipv6->nexthdr != IPPROTO_TCP) &&
+	    (first->protocol != htons(ETH_P_IP) ||
+	     hdr.ipv4->protocol != IPPROTO_TCP))
+		return;
+
+	th = tcp_hdr(first->skb);
+
+	/* skip this packet since it is invalid or the socket is closing */
+	if (!th || th->fin)
+		return;
+
+	/* sample on all syn packets or once every atr sample count */
+	if (!th->syn && (ring->atr_count < ring->atr_sample_rate))
+		return;
+
+	/* reset sample count */
+	ring->atr_count = 0;
+
+	vlan_id = htons(first->tx_flags >> IXGBE_TX_FLAGS_VLAN_SHIFT);
+
+	/*
+	 * src and dst are inverted, think how the receiver sees them
+	 *
+	 * The input is broken into two sections, a non-compressed section
+	 * containing vm_pool, vlan_id, and flow_type.  The rest of the data
+	 * is XORed together and stored in the compressed dword.
+	 */
+	input.formatted.vlan_id = vlan_id;
+
+	/*
+	 * since src port and flex bytes occupy the same word XOR them together
+	 * and write the value to source port portion of compressed dword
+	 */
+	if (first->tx_flags & (IXGBE_TX_FLAGS_SW_VLAN | IXGBE_TX_FLAGS_HW_VLAN))
+		common.port.src ^= th->dest ^ htons(ETH_P_8021Q);
+	else
+		common.port.src ^= th->dest ^ first->protocol;
+	common.port.dst ^= th->source;
+
+	if (first->protocol == htons(ETH_P_IP)) {
+		input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
+		common.ip ^= hdr.ipv4->saddr ^ hdr.ipv4->daddr;
+	} else {
+		input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV6;
+		common.ip ^= hdr.ipv6->saddr.s6_addr32[0] ^
+			     hdr.ipv6->saddr.s6_addr32[1] ^
+			     hdr.ipv6->saddr.s6_addr32[2] ^
+			     hdr.ipv6->saddr.s6_addr32[3] ^
+			     hdr.ipv6->daddr.s6_addr32[0] ^
+			     hdr.ipv6->daddr.s6_addr32[1] ^
+			     hdr.ipv6->daddr.s6_addr32[2] ^
+			     hdr.ipv6->daddr.s6_addr32[3];
+	}
+
+	/* This assumes the Rx queue and Tx queue are bound to the same CPU */
+	ixgbe_fdir_add_signature_filter_82599(&q_vector->adapter->hw,
+					      input, common, ring->queue_index);
+}
+
+static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb,
+			      void *accel_priv, select_queue_fallback_t fallback)
+{
+	struct ixgbe_fwd_adapter *fwd_adapter = accel_priv;
+#ifdef IXGBE_FCOE
+	struct ixgbe_adapter *adapter;
+	struct ixgbe_ring_feature *f;
+	int txq;
+#endif
+
+	if (fwd_adapter)
+		return skb->queue_mapping + fwd_adapter->tx_base_queue;
+
+#ifdef IXGBE_FCOE
+
+	/*
+	 * only execute the code below if protocol is FCoE
+	 * or FIP and we have FCoE enabled on the adapter
+	 */
+	switch (vlan_get_protocol(skb)) {
+	case htons(ETH_P_FCOE):
+	case htons(ETH_P_FIP):
+		adapter = netdev_priv(dev);
+
+		if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+			break;
+	default:
+		return fallback(dev, skb);
+	}
+
+	f = &adapter->ring_feature[RING_F_FCOE];
+
+	txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) :
+					   smp_processor_id();
+
+	while (txq >= f->indices)
+		txq -= f->indices;
+
+	return txq + f->offset;
+#else
+	return fallback(dev, skb);
+#endif
+}
+
+netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
+			  struct ixgbe_adapter *adapter,
+			  struct ixgbe_ring *tx_ring)
+{
+	struct ixgbe_tx_buffer *first;
+	int tso;
+	u32 tx_flags = 0;
+	unsigned short f;
+	u16 count = TXD_USE_COUNT(skb_headlen(skb));
+	__be16 protocol = skb->protocol;
+	u8 hdr_len = 0;
+
+	/*
+	 * need: 1 descriptor per page * PAGE_SIZE/IXGBE_MAX_DATA_PER_TXD,
+	 *       + 1 desc for skb_headlen/IXGBE_MAX_DATA_PER_TXD,
+	 *       + 2 desc gap to keep tail from touching head,
+	 *       + 1 desc for context descriptor,
+	 * otherwise try next time
+	 */
+	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
+		count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
+
+	if (ixgbe_maybe_stop_tx(tx_ring, count + 3)) {
+		tx_ring->tx_stats.tx_busy++;
+		return NETDEV_TX_BUSY;
+	}
+
+	/* record the location of the first descriptor for this packet */
+	first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
+	first->skb = skb;
+	first->bytecount = skb->len;
+	first->gso_segs = 1;
+
+	/* if we have a HW VLAN tag being added default to the HW one */
+	if (skb_vlan_tag_present(skb)) {
+		tx_flags |= skb_vlan_tag_get(skb) << IXGBE_TX_FLAGS_VLAN_SHIFT;
+		tx_flags |= IXGBE_TX_FLAGS_HW_VLAN;
+	/* else if it is a SW VLAN check the next protocol and store the tag */
+	} else if (protocol == htons(ETH_P_8021Q)) {
+		struct vlan_hdr *vhdr, _vhdr;
+		vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr);
+		if (!vhdr)
+			goto out_drop;
+
+		tx_flags |= ntohs(vhdr->h_vlan_TCI) <<
+				  IXGBE_TX_FLAGS_VLAN_SHIFT;
+		tx_flags |= IXGBE_TX_FLAGS_SW_VLAN;
+	}
+	protocol = vlan_get_protocol(skb);
+
+	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+	    adapter->ptp_clock &&
+	    !test_and_set_bit_lock(__IXGBE_PTP_TX_IN_PROGRESS,
+				   &adapter->state)) {
+		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+		tx_flags |= IXGBE_TX_FLAGS_TSTAMP;
+
+		/* schedule check for Tx timestamp */
+		adapter->ptp_tx_skb = skb_get(skb);
+		adapter->ptp_tx_start = jiffies;
+		schedule_work(&adapter->ptp_tx_work);
+	}
+
+	skb_tx_timestamp(skb);
+
+#ifdef CONFIG_PCI_IOV
+	/*
+	 * Use the l2switch_enable flag - would be false if the DMA
+	 * Tx switch had been disabled.
+	 */
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		tx_flags |= IXGBE_TX_FLAGS_CC;
+
+#endif
+	/* DCB maps skb priorities 0-7 onto 3 bit PCP of VLAN tag. */
+	if ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) &&
+	    ((tx_flags & (IXGBE_TX_FLAGS_HW_VLAN | IXGBE_TX_FLAGS_SW_VLAN)) ||
+	     (skb->priority != TC_PRIO_CONTROL))) {
+		tx_flags &= ~IXGBE_TX_FLAGS_VLAN_PRIO_MASK;
+		tx_flags |= (skb->priority & 0x7) <<
+					IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT;
+		if (tx_flags & IXGBE_TX_FLAGS_SW_VLAN) {
+			struct vlan_ethhdr *vhdr;
+
+			if (skb_cow_head(skb, 0))
+				goto out_drop;
+			vhdr = (struct vlan_ethhdr *)skb->data;
+			vhdr->h_vlan_TCI = htons(tx_flags >>
+						 IXGBE_TX_FLAGS_VLAN_SHIFT);
+		} else {
+			tx_flags |= IXGBE_TX_FLAGS_HW_VLAN;
+		}
+	}
+
+	/* record initial flags and protocol */
+	first->tx_flags = tx_flags;
+	first->protocol = protocol;
+
+#ifdef IXGBE_FCOE
+	/* setup tx offload for FCoE */
+	if ((protocol == htons(ETH_P_FCOE)) &&
+	    (tx_ring->netdev->features & (NETIF_F_FSO | NETIF_F_FCOE_CRC))) {
+		tso = ixgbe_fso(tx_ring, first, &hdr_len);
+		if (tso < 0)
+			goto out_drop;
+
+		goto xmit_fcoe;
+	}
+
+#endif /* IXGBE_FCOE */
+	tso = ixgbe_tso(tx_ring, first, &hdr_len);
+	if (tso < 0)
+		goto out_drop;
+	else if (!tso)
+		ixgbe_tx_csum(tx_ring, first);
+
+	/* add the ATR filter if ATR is on */
+	if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state))
+		ixgbe_atr(tx_ring, first);
+
+#ifdef IXGBE_FCOE
+xmit_fcoe:
+#endif /* IXGBE_FCOE */
+	ixgbe_tx_map(tx_ring, first, hdr_len);
+
+	return NETDEV_TX_OK;
+
+out_drop:
+	dev_kfree_skb_any(first->skb);
+	first->skb = NULL;
+
+	return NETDEV_TX_OK;
+}
+
+static netdev_tx_t __ixgbe_xmit_frame(struct sk_buff *skb,
+				      struct net_device *netdev,
+				      struct ixgbe_ring *ring)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_ring *tx_ring;
+
+	/*
+	 * The minimum packet size for olinfo paylen is 17 so pad the skb
+	 * in order to meet this minimum size requirement.
+	 */
+	if (skb_put_padto(skb, 17))
+		return NETDEV_TX_OK;
+
+	tx_ring = ring ? ring : adapter->tx_ring[skb->queue_mapping];
+
+	return ixgbe_xmit_frame_ring(skb, adapter, tx_ring);
+}
+
+static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb,
+				    struct net_device *netdev)
+{
+	return __ixgbe_xmit_frame(skb, netdev, NULL);
+}
+
+/**
+ * ixgbe_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbe_set_mac(struct net_device *netdev, void *p)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct sockaddr *addr = p;
+	int ret;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	ixgbe_del_mac_filter(adapter, hw->mac.addr, VMDQ_P(0));
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+	ret = ixgbe_add_mac_filter(adapter, hw->mac.addr, VMDQ_P(0));
+	return ret > 0 ? 0 : ret;
+}
+
+static int
+ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 value;
+	int rc;
+
+	if (prtad != hw->phy.mdio.prtad)
+		return -EINVAL;
+	rc = hw->phy.ops.read_reg(hw, addr, devad, &value);
+	if (!rc)
+		rc = value;
+	return rc;
+}
+
+static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad,
+			    u16 addr, u16 value)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if (prtad != hw->phy.mdio.prtad)
+		return -EINVAL;
+	return hw->phy.ops.write_reg(hw, addr, devad, value);
+}
+
+static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	switch (cmd) {
+	case SIOCSHWTSTAMP:
+		return ixgbe_ptp_set_ts_config(adapter, req);
+	case SIOCGHWTSTAMP:
+		return ixgbe_ptp_get_ts_config(adapter, req);
+	default:
+		return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd);
+	}
+}
+
+/**
+ * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding
+ * netdev->dev_addrs
+ * @netdev: network interface device structure
+ *
+ * Returns non-zero on failure
+ **/
+static int ixgbe_add_sanmac_netdev(struct net_device *dev)
+{
+	int err = 0;
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if (is_valid_ether_addr(hw->mac.san_addr)) {
+		rtnl_lock();
+		err = dev_addr_add(dev, hw->mac.san_addr, NETDEV_HW_ADDR_T_SAN);
+		rtnl_unlock();
+
+		/* update SAN MAC vmdq pool selection */
+		hw->mac.ops.set_vmdq_san_mac(hw, VMDQ_P(0));
+	}
+	return err;
+}
+
+/**
+ * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding
+ * netdev->dev_addrs
+ * @netdev: network interface device structure
+ *
+ * Returns non-zero on failure
+ **/
+static int ixgbe_del_sanmac_netdev(struct net_device *dev)
+{
+	int err = 0;
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_mac_info *mac = &adapter->hw.mac;
+
+	if (is_valid_ether_addr(mac->san_addr)) {
+		rtnl_lock();
+		err = dev_addr_del(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN);
+		rtnl_unlock();
+	}
+	return err;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void ixgbe_netpoll(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	int i;
+
+	/* if interface is down do nothing */
+	if (test_bit(__IXGBE_DOWN, &adapter->state))
+		return;
+
+	/* loop through and schedule all active queues */
+	for (i = 0; i < adapter->num_q_vectors; i++)
+		ixgbe_msix_clean_rings(0, adapter->q_vector[i]);
+}
+
+#endif
+static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev,
+						   struct rtnl_link_stats64 *stats)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	int i;
+
+	rcu_read_lock();
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		struct ixgbe_ring *ring = ACCESS_ONCE(adapter->rx_ring[i]);
+		u64 bytes, packets;
+		unsigned int start;
+
+		if (ring) {
+			do {
+				start = u64_stats_fetch_begin_irq(&ring->syncp);
+				packets = ring->stats.packets;
+				bytes   = ring->stats.bytes;
+			} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
+			stats->rx_packets += packets;
+			stats->rx_bytes   += bytes;
+		}
+	}
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct ixgbe_ring *ring = ACCESS_ONCE(adapter->tx_ring[i]);
+		u64 bytes, packets;
+		unsigned int start;
+
+		if (ring) {
+			do {
+				start = u64_stats_fetch_begin_irq(&ring->syncp);
+				packets = ring->stats.packets;
+				bytes   = ring->stats.bytes;
+			} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
+			stats->tx_packets += packets;
+			stats->tx_bytes   += bytes;
+		}
+	}
+	rcu_read_unlock();
+	/* following stats updated by ixgbe_watchdog_task() */
+	stats->multicast	= netdev->stats.multicast;
+	stats->rx_errors	= netdev->stats.rx_errors;
+	stats->rx_length_errors	= netdev->stats.rx_length_errors;
+	stats->rx_crc_errors	= netdev->stats.rx_crc_errors;
+	stats->rx_missed_errors	= netdev->stats.rx_missed_errors;
+	return stats;
+}
+
+#ifdef CONFIG_IXGBE_DCB
+/**
+ * ixgbe_validate_rtr - verify 802.1Qp to Rx packet buffer mapping is valid.
+ * @adapter: pointer to ixgbe_adapter
+ * @tc: number of traffic classes currently enabled
+ *
+ * Configure a valid 802.1Qp to Rx packet buffer mapping ie confirm
+ * 802.1Q priority maps to a packet buffer that exists.
+ */
+static void ixgbe_validate_rtr(struct ixgbe_adapter *adapter, u8 tc)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 reg, rsave;
+	int i;
+
+	/* 82598 have a static priority to TC mapping that can not
+	 * be changed so no validation is needed.
+	 */
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return;
+
+	reg = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC);
+	rsave = reg;
+
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		u8 up2tc = reg >> (i * IXGBE_RTRUP2TC_UP_SHIFT);
+
+		/* If up2tc is out of bounds default to zero */
+		if (up2tc > tc)
+			reg &= ~(0x7 << IXGBE_RTRUP2TC_UP_SHIFT);
+	}
+
+	if (reg != rsave)
+		IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg);
+
+	return;
+}
+
+/**
+ * ixgbe_set_prio_tc_map - Configure netdev prio tc map
+ * @adapter: Pointer to adapter struct
+ *
+ * Populate the netdev user priority to tc map
+ */
+static void ixgbe_set_prio_tc_map(struct ixgbe_adapter *adapter)
+{
+	struct net_device *dev = adapter->netdev;
+	struct ixgbe_dcb_config *dcb_cfg = &adapter->dcb_cfg;
+	struct ieee_ets *ets = adapter->ixgbe_ieee_ets;
+	u8 prio;
+
+	for (prio = 0; prio < MAX_USER_PRIORITY; prio++) {
+		u8 tc = 0;
+
+		if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE)
+			tc = ixgbe_dcb_get_tc_from_up(dcb_cfg, 0, prio);
+		else if (ets)
+			tc = ets->prio_tc[prio];
+
+		netdev_set_prio_tc_map(dev, prio, tc);
+	}
+}
+
+#endif /* CONFIG_IXGBE_DCB */
+/**
+ * ixgbe_setup_tc - configure net_device for multiple traffic classes
+ *
+ * @netdev: net device to configure
+ * @tc: number of traffic classes to enable
+ */
+int ixgbe_setup_tc(struct net_device *dev, u8 tc)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	bool pools;
+
+	/* Hardware supports up to 8 traffic classes */
+	if (tc > adapter->dcb_cfg.num_tcs.pg_tcs ||
+	    (hw->mac.type == ixgbe_mac_82598EB &&
+	     tc < MAX_TRAFFIC_CLASS))
+		return -EINVAL;
+
+	pools = (find_first_zero_bit(&adapter->fwd_bitmask, 32) > 1);
+	if (tc && pools && adapter->num_rx_pools > IXGBE_MAX_DCBMACVLANS)
+		return -EBUSY;
+
+	/* Hardware has to reinitialize queues and interrupts to
+	 * match packet buffer alignment. Unfortunately, the
+	 * hardware is not flexible enough to do this dynamically.
+	 */
+	if (netif_running(dev))
+		ixgbe_close(dev);
+	ixgbe_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_IXGBE_DCB
+	if (tc) {
+		netdev_set_num_tc(dev, tc);
+		ixgbe_set_prio_tc_map(adapter);
+
+		adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
+
+		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+			adapter->last_lfc_mode = adapter->hw.fc.requested_mode;
+			adapter->hw.fc.requested_mode = ixgbe_fc_none;
+		}
+	} else {
+		netdev_reset_tc(dev);
+
+		if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+			adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
+
+		adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
+
+		adapter->temp_dcb_cfg.pfc_mode_enable = false;
+		adapter->dcb_cfg.pfc_mode_enable = false;
+	}
+
+	ixgbe_validate_rtr(adapter, tc);
+
+#endif /* CONFIG_IXGBE_DCB */
+	ixgbe_init_interrupt_scheme(adapter);
+
+	if (netif_running(dev))
+		return ixgbe_open(dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PCI_IOV
+void ixgbe_sriov_reinit(struct ixgbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	rtnl_lock();
+	ixgbe_setup_tc(netdev, netdev_get_num_tc(netdev));
+	rtnl_unlock();
+}
+
+#endif
+void ixgbe_do_reset(struct net_device *netdev)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	if (netif_running(netdev))
+		ixgbe_reinit_locked(adapter);
+	else
+		ixgbe_reset(adapter);
+}
+
+static netdev_features_t ixgbe_fix_features(struct net_device *netdev,
+					    netdev_features_t features)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	/* If Rx checksum is disabled, then RSC/LRO should also be disabled */
+	if (!(features & NETIF_F_RXCSUM))
+		features &= ~NETIF_F_LRO;
+
+	/* Turn off LRO if not RSC capable */
+	if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
+		features &= ~NETIF_F_LRO;
+
+	return features;
+}
+
+static int ixgbe_set_features(struct net_device *netdev,
+			      netdev_features_t features)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	netdev_features_t changed = netdev->features ^ features;
+	bool need_reset = false;
+
+	/* Make sure RSC matches LRO, reset if change */
+	if (!(features & NETIF_F_LRO)) {
+		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+			need_reset = true;
+		adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
+	} else if ((adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) &&
+		   !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) {
+		if (adapter->rx_itr_setting == 1 ||
+		    adapter->rx_itr_setting > IXGBE_MIN_RSC_ITR) {
+			adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
+			need_reset = true;
+		} else if ((changed ^ features) & NETIF_F_LRO) {
+			e_info(probe, "rx-usecs set too low, "
+			       "disabling RSC\n");
+		}
+	}
+
+	/*
+	 * Check if Flow Director n-tuple support was enabled or disabled.  If
+	 * the state changed, we need to reset.
+	 */
+	switch (features & NETIF_F_NTUPLE) {
+	case NETIF_F_NTUPLE:
+		/* turn off ATR, enable perfect filters and reset */
+		if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+			need_reset = true;
+
+		adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+		adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+		break;
+	default:
+		/* turn off perfect filters, enable ATR and reset */
+		if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+			need_reset = true;
+
+		adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+
+		/* We cannot enable ATR if SR-IOV is enabled */
+		if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+			break;
+
+		/* We cannot enable ATR if we have 2 or more traffic classes */
+		if (netdev_get_num_tc(netdev) > 1)
+			break;
+
+		/* We cannot enable ATR if RSS is disabled */
+		if (adapter->ring_feature[RING_F_RSS].limit <= 1)
+			break;
+
+		/* A sample rate of 0 indicates ATR disabled */
+		if (!adapter->atr_sample_rate)
+			break;
+
+		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+		break;
+	}
+
+	if (features & NETIF_F_HW_VLAN_CTAG_RX)
+		ixgbe_vlan_strip_enable(adapter);
+	else
+		ixgbe_vlan_strip_disable(adapter);
+
+	if (changed & NETIF_F_RXALL)
+		need_reset = true;
+
+	netdev->features = features;
+	if (need_reset)
+		ixgbe_do_reset(netdev);
+
+	return 0;
+}
+
+/**
+ * ixgbe_add_vxlan_port - Get notifications about VXLAN ports that come up
+ * @dev: The port's netdev
+ * @sa_family: Socket Family that VXLAN is notifiying us about
+ * @port: New UDP port number that VXLAN started listening to
+ **/
+static void ixgbe_add_vxlan_port(struct net_device *dev, sa_family_t sa_family,
+				 __be16 port)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 new_port = ntohs(port);
+
+	if (sa_family == AF_INET6)
+		return;
+
+	if (adapter->vxlan_port == new_port) {
+		netdev_info(dev, "Port %d already offloaded\n", new_port);
+		return;
+	}
+
+	if (adapter->vxlan_port) {
+		netdev_info(dev,
+			    "Hit Max num of UDP ports, not adding port %d\n",
+			    new_port);
+		return;
+	}
+
+	adapter->vxlan_port = new_port;
+	IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, new_port);
+}
+
+/**
+ * ixgbe_del_vxlan_port - Get notifications about VXLAN ports that go away
+ * @dev: The port's netdev
+ * @sa_family: Socket Family that VXLAN is notifying us about
+ * @port: UDP port number that VXLAN stopped listening to
+ **/
+static void ixgbe_del_vxlan_port(struct net_device *dev, sa_family_t sa_family,
+				 __be16 port)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 new_port = ntohs(port);
+
+	if (sa_family == AF_INET6)
+		return;
+
+	if (adapter->vxlan_port != new_port) {
+		netdev_info(dev, "Port %d was not found, not deleting\n",
+			    new_port);
+		return;
+	}
+
+	adapter->vxlan_port = 0;
+	IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, 0);
+}
+
+static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
+			     struct net_device *dev,
+			     const unsigned char *addr, u16 vid,
+			     u16 flags)
+{
+	/* guarantee we can provide a unique filter for the unicast address */
+	if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) {
+		if (IXGBE_MAX_PF_MACVLANS <= netdev_uc_count(dev))
+			return -ENOMEM;
+	}
+
+	return ndo_dflt_fdb_add(ndm, tb, dev, addr, vid, flags);
+}
+
+/**
+ * ixgbe_configure_bridge_mode - set various bridge modes
+ * @adapter - the private structure
+ * @mode - requested bridge mode
+ *
+ * Configure some settings require for various bridge modes.
+ **/
+static int ixgbe_configure_bridge_mode(struct ixgbe_adapter *adapter,
+				       __u16 mode)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	unsigned int p, num_pools;
+	u32 vmdctl;
+
+	switch (mode) {
+	case BRIDGE_MODE_VEPA:
+		/* disable Tx loopback, rely on switch hairpin mode */
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_PFDTXGSWC, 0);
+
+		/* must enable Rx switching replication to allow multicast
+		 * packet reception on all VFs, and to enable source address
+		 * pruning.
+		 */
+		vmdctl = IXGBE_READ_REG(hw, IXGBE_VMD_CTL);
+		vmdctl |= IXGBE_VT_CTL_REPLEN;
+		IXGBE_WRITE_REG(hw, IXGBE_VMD_CTL, vmdctl);
+
+		/* enable Rx source address pruning. Note, this requires
+		 * replication to be enabled or else it does nothing.
+		 */
+		num_pools = adapter->num_vfs + adapter->num_rx_pools;
+		for (p = 0; p < num_pools; p++) {
+			if (hw->mac.ops.set_source_address_pruning)
+				hw->mac.ops.set_source_address_pruning(hw,
+								       true,
+								       p);
+		}
+		break;
+	case BRIDGE_MODE_VEB:
+		/* enable Tx loopback for internal VF/PF communication */
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_PFDTXGSWC,
+				IXGBE_PFDTXGSWC_VT_LBEN);
+
+		/* disable Rx switching replication unless we have SR-IOV
+		 * virtual functions
+		 */
+		vmdctl = IXGBE_READ_REG(hw, IXGBE_VMD_CTL);
+		if (!adapter->num_vfs)
+			vmdctl &= ~IXGBE_VT_CTL_REPLEN;
+		IXGBE_WRITE_REG(hw, IXGBE_VMD_CTL, vmdctl);
+
+		/* disable Rx source address pruning, since we don't expect to
+		 * be receiving external loopback of our transmitted frames.
+		 */
+		num_pools = adapter->num_vfs + adapter->num_rx_pools;
+		for (p = 0; p < num_pools; p++) {
+			if (hw->mac.ops.set_source_address_pruning)
+				hw->mac.ops.set_source_address_pruning(hw,
+								       false,
+								       p);
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	adapter->bridge_mode = mode;
+
+	e_info(drv, "enabling bridge mode: %s\n",
+	       mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB");
+
+	return 0;
+}
+
+static int ixgbe_ndo_bridge_setlink(struct net_device *dev,
+				    struct nlmsghdr *nlh, u16 flags)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct nlattr *attr, *br_spec;
+	int rem;
+
+	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+		return -EOPNOTSUPP;
+
+	br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
+	if (!br_spec)
+		return -EINVAL;
+
+	nla_for_each_nested(attr, br_spec, rem) {
+		u32 status;
+		__u16 mode;
+
+		if (nla_type(attr) != IFLA_BRIDGE_MODE)
+			continue;
+
+		if (nla_len(attr) < sizeof(mode))
+			return -EINVAL;
+
+		mode = nla_get_u16(attr);
+		status = ixgbe_configure_bridge_mode(adapter, mode);
+		if (status)
+			return status;
+
+		break;
+	}
+
+	return 0;
+}
+
+static int ixgbe_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
+				    struct net_device *dev,
+				    u32 filter_mask, int nlflags)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+
+	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+		return 0;
+
+	return ndo_dflt_bridge_getlink(skb, pid, seq, dev,
+				       adapter->bridge_mode, 0, 0, nlflags);
+}
+
+static void *ixgbe_fwd_add(struct net_device *pdev, struct net_device *vdev)
+{
+	struct ixgbe_fwd_adapter *fwd_adapter = NULL;
+	struct ixgbe_adapter *adapter = netdev_priv(pdev);
+	int used_pools = adapter->num_vfs + adapter->num_rx_pools;
+	unsigned int limit;
+	int pool, err;
+
+	/* Hardware has a limited number of available pools. Each VF, and the
+	 * PF require a pool. Check to ensure we don't attempt to use more
+	 * then the available number of pools.
+	 */
+	if (used_pools >= IXGBE_MAX_VF_FUNCTIONS)
+		return ERR_PTR(-EINVAL);
+
+#ifdef CONFIG_RPS
+	if (vdev->num_rx_queues != vdev->num_tx_queues) {
+		netdev_info(pdev, "%s: Only supports a single queue count for TX and RX\n",
+			    vdev->name);
+		return ERR_PTR(-EINVAL);
+	}
+#endif
+	/* Check for hardware restriction on number of rx/tx queues */
+	if (vdev->num_tx_queues > IXGBE_MAX_L2A_QUEUES ||
+	    vdev->num_tx_queues == IXGBE_BAD_L2A_QUEUE) {
+		netdev_info(pdev,
+			    "%s: Supports RX/TX Queue counts 1,2, and 4\n",
+			    pdev->name);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (((adapter->flags & IXGBE_FLAG_DCB_ENABLED) &&
+	      adapter->num_rx_pools > IXGBE_MAX_DCBMACVLANS - 1) ||
+	    (adapter->num_rx_pools > IXGBE_MAX_MACVLANS))
+		return ERR_PTR(-EBUSY);
+
+	fwd_adapter = kcalloc(1, sizeof(struct ixgbe_fwd_adapter), GFP_KERNEL);
+	if (!fwd_adapter)
+		return ERR_PTR(-ENOMEM);
+
+	pool = find_first_zero_bit(&adapter->fwd_bitmask, 32);
+	adapter->num_rx_pools++;
+	set_bit(pool, &adapter->fwd_bitmask);
+	limit = find_last_bit(&adapter->fwd_bitmask, 32);
+
+	/* Enable VMDq flag so device will be set in VM mode */
+	adapter->flags |= IXGBE_FLAG_VMDQ_ENABLED | IXGBE_FLAG_SRIOV_ENABLED;
+	adapter->ring_feature[RING_F_VMDQ].limit = limit + 1;
+	adapter->ring_feature[RING_F_RSS].limit = vdev->num_tx_queues;
+
+	/* Force reinit of ring allocation with VMDQ enabled */
+	err = ixgbe_setup_tc(pdev, netdev_get_num_tc(pdev));
+	if (err)
+		goto fwd_add_err;
+	fwd_adapter->pool = pool;
+	fwd_adapter->real_adapter = adapter;
+	err = ixgbe_fwd_ring_up(vdev, fwd_adapter);
+	if (err)
+		goto fwd_add_err;
+	netif_tx_start_all_queues(vdev);
+	return fwd_adapter;
+fwd_add_err:
+	/* unwind counter and free adapter struct */
+	netdev_info(pdev,
+		    "%s: dfwd hardware acceleration failed\n", vdev->name);
+	clear_bit(pool, &adapter->fwd_bitmask);
+	adapter->num_rx_pools--;
+	kfree(fwd_adapter);
+	return ERR_PTR(err);
+}
+
+static void ixgbe_fwd_del(struct net_device *pdev, void *priv)
+{
+	struct ixgbe_fwd_adapter *fwd_adapter = priv;
+	struct ixgbe_adapter *adapter = fwd_adapter->real_adapter;
+	unsigned int limit;
+
+	clear_bit(fwd_adapter->pool, &adapter->fwd_bitmask);
+	adapter->num_rx_pools--;
+
+	limit = find_last_bit(&adapter->fwd_bitmask, 32);
+	adapter->ring_feature[RING_F_VMDQ].limit = limit + 1;
+	ixgbe_fwd_ring_down(fwd_adapter->netdev, fwd_adapter);
+	ixgbe_setup_tc(pdev, netdev_get_num_tc(pdev));
+	netdev_dbg(pdev, "pool %i:%i queues %i:%i VSI bitmask %lx\n",
+		   fwd_adapter->pool, adapter->num_rx_pools,
+		   fwd_adapter->rx_base_queue,
+		   fwd_adapter->rx_base_queue + adapter->num_rx_queues_per_pool,
+		   adapter->fwd_bitmask);
+	kfree(fwd_adapter);
+}
+
+static const struct net_device_ops ixgbe_netdev_ops = {
+	.ndo_open		= ixgbe_open,
+	.ndo_stop		= ixgbe_close,
+	.ndo_start_xmit		= ixgbe_xmit_frame,
+	.ndo_select_queue	= ixgbe_select_queue,
+	.ndo_set_rx_mode	= ixgbe_set_rx_mode,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= ixgbe_set_mac,
+	.ndo_change_mtu		= ixgbe_change_mtu,
+	.ndo_tx_timeout		= ixgbe_tx_timeout,
+	.ndo_vlan_rx_add_vid	= ixgbe_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= ixgbe_vlan_rx_kill_vid,
+	.ndo_do_ioctl		= ixgbe_ioctl,
+	.ndo_set_vf_mac		= ixgbe_ndo_set_vf_mac,
+	.ndo_set_vf_vlan	= ixgbe_ndo_set_vf_vlan,
+	.ndo_set_vf_rate	= ixgbe_ndo_set_vf_bw,
+	.ndo_set_vf_spoofchk	= ixgbe_ndo_set_vf_spoofchk,
+	.ndo_set_vf_rss_query_en = ixgbe_ndo_set_vf_rss_query_en,
+	.ndo_get_vf_config	= ixgbe_ndo_get_vf_config,
+	.ndo_get_stats64	= ixgbe_get_stats64,
+#ifdef CONFIG_IXGBE_DCB
+	.ndo_setup_tc		= ixgbe_setup_tc,
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= ixgbe_netpoll,
+#endif
+#ifdef CONFIG_NET_RX_BUSY_POLL
+	.ndo_busy_poll		= ixgbe_low_latency_recv,
+#endif
+#ifdef IXGBE_FCOE
+	.ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get,
+	.ndo_fcoe_ddp_target = ixgbe_fcoe_ddp_target,
+	.ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put,
+	.ndo_fcoe_enable = ixgbe_fcoe_enable,
+	.ndo_fcoe_disable = ixgbe_fcoe_disable,
+	.ndo_fcoe_get_wwn = ixgbe_fcoe_get_wwn,
+	.ndo_fcoe_get_hbainfo = ixgbe_fcoe_get_hbainfo,
+#endif /* IXGBE_FCOE */
+	.ndo_set_features = ixgbe_set_features,
+	.ndo_fix_features = ixgbe_fix_features,
+	.ndo_fdb_add		= ixgbe_ndo_fdb_add,
+	.ndo_bridge_setlink	= ixgbe_ndo_bridge_setlink,
+	.ndo_bridge_getlink	= ixgbe_ndo_bridge_getlink,
+	.ndo_dfwd_add_station	= ixgbe_fwd_add,
+	.ndo_dfwd_del_station	= ixgbe_fwd_del,
+	.ndo_add_vxlan_port	= ixgbe_add_vxlan_port,
+	.ndo_del_vxlan_port	= ixgbe_del_vxlan_port,
+};
+
+/**
+ * ixgbe_enumerate_functions - Get the number of ports this device has
+ * @adapter: adapter structure
+ *
+ * This function enumerates the phsyical functions co-located on a single slot,
+ * in order to determine how many ports a device has. This is most useful in
+ * determining the required GT/s of PCIe bandwidth necessary for optimal
+ * performance.
+ **/
+static inline int ixgbe_enumerate_functions(struct ixgbe_adapter *adapter)
+{
+	struct pci_dev *entry, *pdev = adapter->pdev;
+	int physfns = 0;
+
+	/* Some cards can not use the generic count PCIe functions method,
+	 * because they are behind a parent switch, so we hardcode these with
+	 * the correct number of functions.
+	 */
+	if (ixgbe_pcie_from_parent(&adapter->hw))
+		physfns = 4;
+
+	list_for_each_entry(entry, &adapter->pdev->bus->devices, bus_list) {
+		/* don't count virtual functions */
+		if (entry->is_virtfn)
+			continue;
+
+		/* When the devices on the bus don't all match our device ID,
+		 * we can't reliably determine the correct number of
+		 * functions. This can occur if a function has been direct
+		 * attached to a virtual machine using VT-d, for example. In
+		 * this case, simply return -1 to indicate this.
+		 */
+		if ((entry->vendor != pdev->vendor) ||
+		    (entry->device != pdev->device))
+			return -1;
+
+		physfns++;
+	}
+
+	return physfns;
+}
+
+/**
+ * ixgbe_wol_supported - Check whether device supports WoL
+ * @hw: hw specific details
+ * @device_id: the device ID
+ * @subdev_id: the subsystem device ID
+ *
+ * This function is used by probe and ethtool to determine
+ * which devices have WoL support
+ *
+ **/
+int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
+			u16 subdevice_id)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
+	int is_wol_supported = 0;
+
+	switch (device_id) {
+	case IXGBE_DEV_ID_82599_SFP:
+		/* Only these subdevices could supports WOL */
+		switch (subdevice_id) {
+		case IXGBE_SUBDEV_ID_82599_SFP_WOL0:
+		case IXGBE_SUBDEV_ID_82599_560FLR:
+			/* only support first port */
+			if (hw->bus.func != 0)
+				break;
+		case IXGBE_SUBDEV_ID_82599_SP_560FLR:
+		case IXGBE_SUBDEV_ID_82599_SFP:
+		case IXGBE_SUBDEV_ID_82599_RNDC:
+		case IXGBE_SUBDEV_ID_82599_ECNA_DP:
+		case IXGBE_SUBDEV_ID_82599_LOM_SFP:
+			is_wol_supported = 1;
+			break;
+		}
+		break;
+	case IXGBE_DEV_ID_82599EN_SFP:
+		/* Only this subdevice supports WOL */
+		switch (subdevice_id) {
+		case IXGBE_SUBDEV_ID_82599EN_SFP_OCP1:
+			is_wol_supported = 1;
+			break;
+		}
+		break;
+	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+		/* All except this subdevice support WOL */
+		if (subdevice_id != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
+			is_wol_supported = 1;
+		break;
+	case IXGBE_DEV_ID_82599_KX4:
+		is_wol_supported = 1;
+		break;
+	case IXGBE_DEV_ID_X540T:
+	case IXGBE_DEV_ID_X540T1:
+		/* check eeprom to see if enabled wol */
+		if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
+		    ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
+		     (hw->bus.func == 0))) {
+			is_wol_supported = 1;
+		}
+		break;
+	}
+
+	return is_wol_supported;
+}
+
+/**
+ * ixgbe_get_platform_mac_addr - Look up MAC address in Open Firmware / IDPROM
+ * @adapter: Pointer to adapter struct
+ */
+static void ixgbe_get_platform_mac_addr(struct ixgbe_adapter *adapter)
+{
+#ifdef CONFIG_OF
+	struct device_node *dp = pci_device_to_OF_node(adapter->pdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	const unsigned char *addr;
+
+	addr = of_get_mac_address(dp);
+	if (addr) {
+		ether_addr_copy(hw->mac.perm_addr, addr);
+		return;
+	}
+#endif /* CONFIG_OF */
+
+#ifdef CONFIG_SPARC
+	ether_addr_copy(hw->mac.perm_addr, idprom->id_ethaddr);
+#endif /* CONFIG_SPARC */
+}
+
+/**
+ * ixgbe_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in ixgbe_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * ixgbe_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct net_device *netdev;
+	struct ixgbe_adapter *adapter = NULL;
+	struct ixgbe_hw *hw;
+	const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
+	int i, err, pci_using_dac, expected_gts;
+	unsigned int indices = MAX_TX_QUEUES;
+	u8 part_str[IXGBE_PBANUM_LENGTH];
+	bool disable_dev = false;
+#ifdef IXGBE_FCOE
+	u16 device_caps;
+#endif
+	u32 eec;
+
+	/* Catch broken hardware that put the wrong VF device ID in
+	 * the PCIe SR-IOV capability.
+	 */
+	if (pdev->is_virtfn) {
+		WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+		     pci_name(pdev), pdev->vendor, pdev->device);
+		return -EINVAL;
+	}
+
+	err = pci_enable_device_mem(pdev);
+	if (err)
+		return err;
+
+	if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) {
+		pci_using_dac = 1;
+	} else {
+		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+		if (err) {
+			dev_err(&pdev->dev,
+				"No usable DMA configuration, aborting\n");
+			goto err_dma;
+		}
+		pci_using_dac = 0;
+	}
+
+	err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
+					   IORESOURCE_MEM), ixgbe_driver_name);
+	if (err) {
+		dev_err(&pdev->dev,
+			"pci_request_selected_regions failed 0x%x\n", err);
+		goto err_pci_reg;
+	}
+
+	pci_enable_pcie_error_reporting(pdev);
+
+	pci_set_master(pdev);
+	pci_save_state(pdev);
+
+	if (ii->mac == ixgbe_mac_82598EB) {
+#ifdef CONFIG_IXGBE_DCB
+		/* 8 TC w/ 4 queues per TC */
+		indices = 4 * MAX_TRAFFIC_CLASS;
+#else
+		indices = IXGBE_MAX_RSS_INDICES;
+#endif
+	}
+
+	netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices);
+	if (!netdev) {
+		err = -ENOMEM;
+		goto err_alloc_etherdev;
+	}
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+
+	adapter = netdev_priv(netdev);
+
+	adapter->netdev = netdev;
+	adapter->pdev = pdev;
+	hw = &adapter->hw;
+	hw->back = adapter;
+	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
+
+	hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
+			      pci_resource_len(pdev, 0));
+	adapter->io_addr = hw->hw_addr;
+	if (!hw->hw_addr) {
+		err = -EIO;
+		goto err_ioremap;
+	}
+
+	netdev->netdev_ops = &ixgbe_netdev_ops;
+	ixgbe_set_ethtool_ops(netdev);
+	netdev->watchdog_timeo = 5 * HZ;
+	strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
+
+	/* Setup hw api */
+	memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
+	hw->mac.type  = ii->mac;
+
+	/* EEPROM */
+	memcpy(&hw->eeprom.ops, ii->eeprom_ops, sizeof(hw->eeprom.ops));
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+	if (ixgbe_removed(hw->hw_addr)) {
+		err = -EIO;
+		goto err_ioremap;
+	}
+	/* If EEPROM is valid (bit 8 = 1), use default otherwise use bit bang */
+	if (!(eec & (1 << 8)))
+		hw->eeprom.ops.read = &ixgbe_read_eeprom_bit_bang_generic;
+
+	/* PHY */
+	memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops));
+	hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+	/* ixgbe_identify_phy_generic will set prtad and mmds properly */
+	hw->phy.mdio.prtad = MDIO_PRTAD_NONE;
+	hw->phy.mdio.mmds = 0;
+	hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	hw->phy.mdio.dev = netdev;
+	hw->phy.mdio.mdio_read = ixgbe_mdio_read;
+	hw->phy.mdio.mdio_write = ixgbe_mdio_write;
+
+	ii->get_invariants(hw);
+
+	/* setup the private structure */
+	err = ixgbe_sw_init(adapter);
+	if (err)
+		goto err_sw_init;
+
+	/* Make it possible the adapter to be woken up via WOL */
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * If there is a fan on this device and it has failed log the
+	 * failure.
+	 */
+	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
+		u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		if (esdp & IXGBE_ESDP_SDP1)
+			e_crit(probe, "Fan has stopped, replace the adapter\n");
+	}
+
+	if (allow_unsupported_sfp)
+		hw->allow_unsupported_sfp = allow_unsupported_sfp;
+
+	/* reset_hw fills in the perm_addr as well */
+	hw->phy.reset_if_overtemp = true;
+	err = hw->mac.ops.reset_hw(hw);
+	hw->phy.reset_if_overtemp = false;
+	if (err == IXGBE_ERR_SFP_NOT_PRESENT &&
+	    hw->mac.type == ixgbe_mac_82598EB) {
+		err = 0;
+	} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+		e_dev_err("failed to load because an unsupported SFP+ or QSFP module type was detected.\n");
+		e_dev_err("Reload the driver after installing a supported module.\n");
+		goto err_sw_init;
+	} else if (err) {
+		e_dev_err("HW Init failed: %d\n", err);
+		goto err_sw_init;
+	}
+
+#ifdef CONFIG_PCI_IOV
+	/* SR-IOV not supported on the 82598 */
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+		goto skip_sriov;
+	/* Mailbox */
+	ixgbe_init_mbx_params_pf(hw);
+	memcpy(&hw->mbx.ops, ii->mbx_ops, sizeof(hw->mbx.ops));
+	pci_sriov_set_totalvfs(pdev, IXGBE_MAX_VFS_DRV_LIMIT);
+	ixgbe_enable_sriov(adapter);
+skip_sriov:
+
+#endif
+	netdev->features = NETIF_F_SG |
+			   NETIF_F_IP_CSUM |
+			   NETIF_F_IPV6_CSUM |
+			   NETIF_F_HW_VLAN_CTAG_TX |
+			   NETIF_F_HW_VLAN_CTAG_RX |
+			   NETIF_F_TSO |
+			   NETIF_F_TSO6 |
+			   NETIF_F_RXHASH |
+			   NETIF_F_RXCSUM;
+
+	netdev->hw_features = netdev->features | NETIF_F_HW_L2FW_DOFFLOAD;
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		netdev->features |= NETIF_F_SCTP_CSUM;
+		netdev->hw_features |= NETIF_F_SCTP_CSUM |
+				       NETIF_F_NTUPLE;
+		break;
+	default:
+		break;
+	}
+
+	netdev->hw_features |= NETIF_F_RXALL;
+	netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+
+	netdev->vlan_features |= NETIF_F_TSO;
+	netdev->vlan_features |= NETIF_F_TSO6;
+	netdev->vlan_features |= NETIF_F_IP_CSUM;
+	netdev->vlan_features |= NETIF_F_IPV6_CSUM;
+	netdev->vlan_features |= NETIF_F_SG;
+
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+	netdev->priv_flags |= IFF_SUPP_NOFCS;
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		netdev->hw_enc_features |= NETIF_F_RXCSUM;
+		break;
+	default:
+		break;
+	}
+
+#ifdef CONFIG_IXGBE_DCB
+	netdev->dcbnl_ops = &dcbnl_ops;
+#endif
+
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) {
+		unsigned int fcoe_l;
+
+		if (hw->mac.ops.get_device_caps) {
+			hw->mac.ops.get_device_caps(hw, &device_caps);
+			if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)
+				adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE;
+		}
+
+
+		fcoe_l = min_t(int, IXGBE_FCRETA_SIZE, num_online_cpus());
+		adapter->ring_feature[RING_F_FCOE].limit = fcoe_l;
+
+		netdev->features |= NETIF_F_FSO |
+				    NETIF_F_FCOE_CRC;
+
+		netdev->vlan_features |= NETIF_F_FSO |
+					 NETIF_F_FCOE_CRC |
+					 NETIF_F_FCOE_MTU;
+	}
+#endif /* IXGBE_FCOE */
+	if (pci_using_dac) {
+		netdev->features |= NETIF_F_HIGHDMA;
+		netdev->vlan_features |= NETIF_F_HIGHDMA;
+	}
+
+	if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
+		netdev->hw_features |= NETIF_F_LRO;
+	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+		netdev->features |= NETIF_F_LRO;
+
+	/* make sure the EEPROM is good */
+	if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
+		e_dev_err("The EEPROM Checksum Is Not Valid\n");
+		err = -EIO;
+		goto err_sw_init;
+	}
+
+	ixgbe_get_platform_mac_addr(adapter);
+
+	memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len);
+
+	if (!is_valid_ether_addr(netdev->dev_addr)) {
+		e_dev_err("invalid MAC address\n");
+		err = -EIO;
+		goto err_sw_init;
+	}
+
+	ixgbe_mac_set_default_filter(adapter, hw->mac.perm_addr);
+
+	setup_timer(&adapter->service_timer, &ixgbe_service_timer,
+		    (unsigned long) adapter);
+
+	if (ixgbe_removed(hw->hw_addr)) {
+		err = -EIO;
+		goto err_sw_init;
+	}
+	INIT_WORK(&adapter->service_task, ixgbe_service_task);
+	set_bit(__IXGBE_SERVICE_INITED, &adapter->state);
+	clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state);
+
+	err = ixgbe_init_interrupt_scheme(adapter);
+	if (err)
+		goto err_sw_init;
+
+	/* WOL not supported for all devices */
+	adapter->wol = 0;
+	hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
+	hw->wol_enabled = ixgbe_wol_supported(adapter, pdev->device,
+						pdev->subsystem_device);
+	if (hw->wol_enabled)
+		adapter->wol = IXGBE_WUFC_MAG;
+
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+	/* save off EEPROM version number */
+	hw->eeprom.ops.read(hw, 0x2e, &adapter->eeprom_verh);
+	hw->eeprom.ops.read(hw, 0x2d, &adapter->eeprom_verl);
+
+	/* pick up the PCI bus settings for reporting later */
+	hw->mac.ops.get_bus_info(hw);
+	if (ixgbe_pcie_from_parent(hw))
+		ixgbe_get_parent_bus_info(adapter);
+
+	/* calculate the expected PCIe bandwidth required for optimal
+	 * performance. Note that some older parts will never have enough
+	 * bandwidth due to being older generation PCIe parts. We clamp these
+	 * parts to ensure no warning is displayed if it can't be fixed.
+	 */
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		expected_gts = min(ixgbe_enumerate_functions(adapter) * 10, 16);
+		break;
+	default:
+		expected_gts = ixgbe_enumerate_functions(adapter) * 10;
+		break;
+	}
+
+	/* don't check link if we failed to enumerate functions */
+	if (expected_gts > 0)
+		ixgbe_check_minimum_link(adapter, expected_gts);
+
+	err = ixgbe_read_pba_string_generic(hw, part_str, sizeof(part_str));
+	if (err)
+		strlcpy(part_str, "Unknown", sizeof(part_str));
+	if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
+		e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n",
+			   hw->mac.type, hw->phy.type, hw->phy.sfp_type,
+			   part_str);
+	else
+		e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n",
+			   hw->mac.type, hw->phy.type, part_str);
+
+	e_dev_info("%pM\n", netdev->dev_addr);
+
+	/* reset the hardware with the new settings */
+	err = hw->mac.ops.start_hw(hw);
+	if (err == IXGBE_ERR_EEPROM_VERSION) {
+		/* We are running on a pre-production device, log a warning */
+		e_dev_warn("This device is a pre-production adapter/LOM. "
+			   "Please be aware there may be issues associated "
+			   "with your hardware.  If you are experiencing "
+			   "problems please contact your Intel or hardware "
+			   "representative who provided you with this "
+			   "hardware.\n");
+	}
+	strcpy(netdev->name, "eth%d");
+	err = register_netdev(netdev);
+	if (err)
+		goto err_register;
+
+	pci_set_drvdata(pdev, adapter);
+
+	/* power down the optics for 82599 SFP+ fiber */
+	if (hw->mac.ops.disable_tx_laser)
+		hw->mac.ops.disable_tx_laser(hw);
+
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+
+#ifdef CONFIG_IXGBE_DCA
+	if (dca_add_requester(&pdev->dev) == 0) {
+		adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
+		ixgbe_setup_dca(adapter);
+	}
+#endif
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+		e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs);
+		for (i = 0; i < adapter->num_vfs; i++)
+			ixgbe_vf_configuration(pdev, (i | 0x10000000));
+	}
+
+	/* firmware requires driver version to be 0xFFFFFFFF
+	 * since os does not support feature
+	 */
+	if (hw->mac.ops.set_fw_drv_ver)
+		hw->mac.ops.set_fw_drv_ver(hw, 0xFF, 0xFF, 0xFF,
+					   0xFF);
+
+	/* add san mac addr to netdev */
+	ixgbe_add_sanmac_netdev(netdev);
+
+	e_dev_info("%s\n", ixgbe_default_device_descr);
+
+#ifdef CONFIG_IXGBE_HWMON
+	if (ixgbe_sysfs_init(adapter))
+		e_err(probe, "failed to allocate sysfs resources\n");
+#endif /* CONFIG_IXGBE_HWMON */
+
+	ixgbe_dbg_adapter_init(adapter);
+
+	/* setup link for SFP devices with MNG FW, else wait for IXGBE_UP */
+	if (ixgbe_mng_enabled(hw) && ixgbe_is_sfp(hw) && hw->mac.ops.setup_link)
+		hw->mac.ops.setup_link(hw,
+			IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL,
+			true);
+
+	return 0;
+
+err_register:
+	ixgbe_release_hw_control(adapter);
+	ixgbe_clear_interrupt_scheme(adapter);
+err_sw_init:
+	ixgbe_disable_sriov(adapter);
+	adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
+	iounmap(adapter->io_addr);
+	kfree(adapter->mac_table);
+err_ioremap:
+	disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state);
+	free_netdev(netdev);
+err_alloc_etherdev:
+	pci_release_selected_regions(pdev,
+				     pci_select_bars(pdev, IORESOURCE_MEM));
+err_pci_reg:
+err_dma:
+	if (!adapter || disable_dev)
+		pci_disable_device(pdev);
+	return err;
+}
+
+/**
+ * ixgbe_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * ixgbe_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.  The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void ixgbe_remove(struct pci_dev *pdev)
+{
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev;
+	bool disable_dev;
+
+	/* if !adapter then we already cleaned up in probe */
+	if (!adapter)
+		return;
+
+	netdev  = adapter->netdev;
+	ixgbe_dbg_adapter_exit(adapter);
+
+	set_bit(__IXGBE_REMOVING, &adapter->state);
+	cancel_work_sync(&adapter->service_task);
+
+
+#ifdef CONFIG_IXGBE_DCA
+	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
+		adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
+		dca_remove_requester(&pdev->dev);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1);
+	}
+
+#endif
+#ifdef CONFIG_IXGBE_HWMON
+	ixgbe_sysfs_exit(adapter);
+#endif /* CONFIG_IXGBE_HWMON */
+
+	/* remove the added san mac */
+	ixgbe_del_sanmac_netdev(netdev);
+
+	if (netdev->reg_state == NETREG_REGISTERED)
+		unregister_netdev(netdev);
+
+#ifdef CONFIG_PCI_IOV
+	/*
+	 * Only disable SR-IOV on unload if the user specified the now
+	 * deprecated max_vfs module parameter.
+	 */
+	if (max_vfs)
+		ixgbe_disable_sriov(adapter);
+#endif
+	ixgbe_clear_interrupt_scheme(adapter);
+
+	ixgbe_release_hw_control(adapter);
+
+#ifdef CONFIG_DCB
+	kfree(adapter->ixgbe_ieee_pfc);
+	kfree(adapter->ixgbe_ieee_ets);
+
+#endif
+	iounmap(adapter->io_addr);
+	pci_release_selected_regions(pdev, pci_select_bars(pdev,
+				     IORESOURCE_MEM));
+
+	e_dev_info("complete\n");
+
+	kfree(adapter->mac_table);
+	disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state);
+	free_netdev(netdev);
+
+	pci_disable_pcie_error_reporting(pdev);
+
+	if (disable_dev)
+		pci_disable_device(pdev);
+}
+
+/**
+ * ixgbe_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
+						pci_channel_state_t state)
+{
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
+
+#ifdef CONFIG_PCI_IOV
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct pci_dev *bdev, *vfdev;
+	u32 dw0, dw1, dw2, dw3;
+	int vf, pos;
+	u16 req_id, pf_func;
+
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB ||
+	    adapter->num_vfs == 0)
+		goto skip_bad_vf_detection;
+
+	bdev = pdev->bus->self;
+	while (bdev && (pci_pcie_type(bdev) != PCI_EXP_TYPE_ROOT_PORT))
+		bdev = bdev->bus->self;
+
+	if (!bdev)
+		goto skip_bad_vf_detection;
+
+	pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR);
+	if (!pos)
+		goto skip_bad_vf_detection;
+
+	dw0 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG);
+	dw1 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 4);
+	dw2 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 8);
+	dw3 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 12);
+	if (ixgbe_removed(hw->hw_addr))
+		goto skip_bad_vf_detection;
+
+	req_id = dw1 >> 16;
+	/* On the 82599 if bit 7 of the requestor ID is set then it's a VF */
+	if (!(req_id & 0x0080))
+		goto skip_bad_vf_detection;
+
+	pf_func = req_id & 0x01;
+	if ((pf_func & 1) == (pdev->devfn & 1)) {
+		unsigned int device_id;
+
+		vf = (req_id & 0x7F) >> 1;
+		e_dev_err("VF %d has caused a PCIe error\n", vf);
+		e_dev_err("TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: "
+				"%8.8x\tdw3: %8.8x\n",
+		dw0, dw1, dw2, dw3);
+		switch (adapter->hw.mac.type) {
+		case ixgbe_mac_82599EB:
+			device_id = IXGBE_82599_VF_DEVICE_ID;
+			break;
+		case ixgbe_mac_X540:
+			device_id = IXGBE_X540_VF_DEVICE_ID;
+			break;
+		case ixgbe_mac_X550:
+			device_id = IXGBE_DEV_ID_X550_VF;
+			break;
+		case ixgbe_mac_X550EM_x:
+			device_id = IXGBE_DEV_ID_X550EM_X_VF;
+			break;
+		default:
+			device_id = 0;
+			break;
+		}
+
+		/* Find the pci device of the offending VF */
+		vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, device_id, NULL);
+		while (vfdev) {
+			if (vfdev->devfn == (req_id & 0xFF))
+				break;
+			vfdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+					       device_id, vfdev);
+		}
+		/*
+		 * There's a slim chance the VF could have been hot plugged,
+		 * so if it is no longer present we don't need to issue the
+		 * VFLR.  Just clean up the AER in that case.
+		 */
+		if (vfdev) {
+			ixgbe_issue_vf_flr(adapter, vfdev);
+			/* Free device reference count */
+			pci_dev_put(vfdev);
+		}
+
+		pci_cleanup_aer_uncorrect_error_status(pdev);
+	}
+
+	/*
+	 * Even though the error may have occurred on the other port
+	 * we still need to increment the vf error reference count for
+	 * both ports because the I/O resume function will be called
+	 * for both of them.
+	 */
+	adapter->vferr_refcount++;
+
+	return PCI_ERS_RESULT_RECOVERED;
+
+skip_bad_vf_detection:
+#endif /* CONFIG_PCI_IOV */
+	if (!test_bit(__IXGBE_SERVICE_INITED, &adapter->state))
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	rtnl_lock();
+	netif_device_detach(netdev);
+
+	if (state == pci_channel_io_perm_failure) {
+		rtnl_unlock();
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	if (netif_running(netdev))
+		ixgbe_down(adapter);
+
+	if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state))
+		pci_disable_device(pdev);
+	rtnl_unlock();
+
+	/* Request a slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * ixgbe_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ */
+static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
+{
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	pci_ers_result_t result;
+	int err;
+
+	if (pci_enable_device_mem(pdev)) {
+		e_err(probe, "Cannot re-enable PCI device after reset.\n");
+		result = PCI_ERS_RESULT_DISCONNECT;
+	} else {
+		smp_mb__before_atomic();
+		clear_bit(__IXGBE_DISABLED, &adapter->state);
+		adapter->hw.hw_addr = adapter->io_addr;
+		pci_set_master(pdev);
+		pci_restore_state(pdev);
+		pci_save_state(pdev);
+
+		pci_wake_from_d3(pdev, false);
+
+		ixgbe_reset(adapter);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+		result = PCI_ERS_RESULT_RECOVERED;
+	}
+
+	err = pci_cleanup_aer_uncorrect_error_status(pdev);
+	if (err) {
+		e_dev_err("pci_cleanup_aer_uncorrect_error_status "
+			  "failed 0x%0x\n", err);
+		/* non-fatal, continue */
+	}
+
+	return result;
+}
+
+/**
+ * ixgbe_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation.
+ */
+static void ixgbe_io_resume(struct pci_dev *pdev)
+{
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
+
+#ifdef CONFIG_PCI_IOV
+	if (adapter->vferr_refcount) {
+		e_info(drv, "Resuming after VF err\n");
+		adapter->vferr_refcount--;
+		return;
+	}
+
+#endif
+	if (netif_running(netdev))
+		ixgbe_up(adapter);
+
+	netif_device_attach(netdev);
+}
+
+static const struct pci_error_handlers ixgbe_err_handler = {
+	.error_detected = ixgbe_io_error_detected,
+	.slot_reset = ixgbe_io_slot_reset,
+	.resume = ixgbe_io_resume,
+};
+
+static struct pci_driver ixgbe_driver = {
+	.name     = ixgbe_driver_name,
+	.id_table = ixgbe_pci_tbl,
+	.probe    = ixgbe_probe,
+	.remove   = ixgbe_remove,
+#ifdef CONFIG_PM
+	.suspend  = ixgbe_suspend,
+	.resume   = ixgbe_resume,
+#endif
+	.shutdown = ixgbe_shutdown,
+	.sriov_configure = ixgbe_pci_sriov_configure,
+	.err_handler = &ixgbe_err_handler
+};
+
+/**
+ * ixgbe_init_module - Driver Registration Routine
+ *
+ * ixgbe_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init ixgbe_init_module(void)
+{
+	int ret;
+	pr_info("%s - version %s\n", ixgbe_driver_string, ixgbe_driver_version);
+	pr_info("%s\n", ixgbe_copyright);
+
+	ixgbe_dbg_init();
+
+	ret = pci_register_driver(&ixgbe_driver);
+	if (ret) {
+		ixgbe_dbg_exit();
+		return ret;
+	}
+
+#ifdef CONFIG_IXGBE_DCA
+	dca_register_notify(&dca_notifier);
+#endif
+
+	return 0;
+}
+
+module_init(ixgbe_init_module);
+
+/**
+ * ixgbe_exit_module - Driver Exit Cleanup Routine
+ *
+ * ixgbe_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit ixgbe_exit_module(void)
+{
+#ifdef CONFIG_IXGBE_DCA
+	dca_unregister_notify(&dca_notifier);
+#endif
+	pci_unregister_driver(&ixgbe_driver);
+
+	ixgbe_dbg_exit();
+}
+
+#ifdef CONFIG_IXGBE_DCA
+static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event,
+			    void *p)
+{
+	int ret_val;
+
+	ret_val = driver_for_each_device(&ixgbe_driver.driver, NULL, &event,
+					 __ixgbe_notify_dca);
+
+	return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
+}
+
+#endif /* CONFIG_IXGBE_DCA */
+
+module_exit(ixgbe_exit_module);
+
+/* ixgbe_main.c */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c
new file mode 100644
index 000000000..9993a471d
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c
@@ -0,0 +1,458 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "ixgbe.h"
+#include "ixgbe_mbx.h"
+
+/**
+ *  ixgbe_read_mbx - Reads a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to read
+ *
+ *  returns SUCCESS if it successfully read message from buffer
+ **/
+s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	/* limit read to size of mailbox */
+	if (size > mbx->size)
+		size = mbx->size;
+
+	if (!mbx->ops.read)
+		return IXGBE_ERR_MBX;
+
+	return mbx->ops.read(hw, msg, size, mbx_id);
+}
+
+/**
+ *  ixgbe_write_mbx - Write a message to the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+s32 ixgbe_write_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	if (size > mbx->size)
+		return IXGBE_ERR_MBX;
+
+	if (!mbx->ops.write)
+		return IXGBE_ERR_MBX;
+
+	return mbx->ops.write(hw, msg, size, mbx_id);
+}
+
+/**
+ *  ixgbe_check_for_msg - checks to see if someone sent us mail
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	if (!mbx->ops.check_for_msg)
+		return IXGBE_ERR_MBX;
+
+	return mbx->ops.check_for_msg(hw, mbx_id);
+}
+
+/**
+ *  ixgbe_check_for_ack - checks to see if someone sent us ACK
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	if (!mbx->ops.check_for_ack)
+		return IXGBE_ERR_MBX;
+
+	return mbx->ops.check_for_ack(hw, mbx_id);
+}
+
+/**
+ *  ixgbe_check_for_rst - checks to see if other side has reset
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to check
+ *
+ *  returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_rst(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	if (!mbx->ops.check_for_rst)
+		return IXGBE_ERR_MBX;
+
+	return mbx->ops.check_for_rst(hw, mbx_id);
+}
+
+/**
+ *  ixgbe_poll_for_msg - Wait for message notification
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification
+ **/
+static s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	if (!countdown || !mbx->ops.check_for_msg)
+		return IXGBE_ERR_MBX;
+
+	while (mbx->ops.check_for_msg(hw, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			return IXGBE_ERR_MBX;
+		udelay(mbx->usec_delay);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_poll_for_ack - Wait for message acknowledgement
+ *  @hw: pointer to the HW structure
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	if (!countdown || !mbx->ops.check_for_ack)
+		return IXGBE_ERR_MBX;
+
+	while (mbx->ops.check_for_ack(hw, mbx_id)) {
+		countdown--;
+		if (!countdown)
+			return IXGBE_ERR_MBX;
+		udelay(mbx->usec_delay);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_posted_mbx - Wait for message notification and receive message
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully received a message notification and
+ *  copied it into the receive buffer.
+ **/
+static s32 ixgbe_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
+				 u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val;
+
+	if (!mbx->ops.read)
+		return IXGBE_ERR_MBX;
+
+	ret_val = ixgbe_poll_for_msg(hw, mbx_id);
+	if (ret_val)
+		return ret_val;
+
+	/* if ack received read message */
+	return mbx->ops.read(hw, msg, size, mbx_id);
+}
+
+/**
+ *  ixgbe_write_posted_mbx - Write a message to the mailbox, wait for ack
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @mbx_id: id of mailbox to write
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer and
+ *  received an ack to that message within delay * timeout period
+ **/
+static s32 ixgbe_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
+			   u16 mbx_id)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	s32 ret_val;
+
+	/* exit if either we can't write or there isn't a defined timeout */
+	if (!mbx->ops.write || !mbx->timeout)
+		return IXGBE_ERR_MBX;
+
+	/* send msg */
+	ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+	if (ret_val)
+		return ret_val;
+
+	/* if msg sent wait until we receive an ack */
+	return ixgbe_poll_for_ack(hw, mbx_id);
+}
+
+static s32 ixgbe_check_for_bit_pf(struct ixgbe_hw *hw, u32 mask, s32 index)
+{
+	u32 mbvficr = IXGBE_READ_REG(hw, IXGBE_MBVFICR(index));
+
+	if (mbvficr & mask) {
+		IXGBE_WRITE_REG(hw, IXGBE_MBVFICR(index), mask);
+		return 0;
+	}
+
+	return IXGBE_ERR_MBX;
+}
+
+/**
+ *  ixgbe_check_for_msg_pf - checks to see if the VF has sent mail
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 ixgbe_check_for_msg_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	s32 index = IXGBE_MBVFICR_INDEX(vf_number);
+	u32 vf_bit = vf_number % 16;
+
+	if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFREQ_VF1 << vf_bit,
+				    index)) {
+		hw->mbx.stats.reqs++;
+		return 0;
+	}
+
+	return IXGBE_ERR_MBX;
+}
+
+/**
+ *  ixgbe_check_for_ack_pf - checks to see if the VF has ACKed
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 ixgbe_check_for_ack_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	s32 index = IXGBE_MBVFICR_INDEX(vf_number);
+	u32 vf_bit = vf_number % 16;
+
+	if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFACK_VF1 << vf_bit,
+				    index)) {
+		hw->mbx.stats.acks++;
+		return 0;
+	}
+
+	return IXGBE_ERR_MBX;
+}
+
+/**
+ *  ixgbe_check_for_rst_pf - checks to see if the VF has reset
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	u32 reg_offset = (vf_number < 32) ? 0 : 1;
+	u32 vf_shift = vf_number % 32;
+	u32 vflre = 0;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+		vflre = IXGBE_READ_REG(hw, IXGBE_VFLRE(reg_offset));
+		break;
+	case ixgbe_mac_X540:
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		vflre = IXGBE_READ_REG(hw, IXGBE_VFLREC(reg_offset));
+		break;
+	default:
+		break;
+	}
+
+	if (vflre & (1 << vf_shift)) {
+		IXGBE_WRITE_REG(hw, IXGBE_VFLREC(reg_offset), (1 << vf_shift));
+		hw->mbx.stats.rsts++;
+		return 0;
+	}
+
+	return IXGBE_ERR_MBX;
+}
+
+/**
+ *  ixgbe_obtain_mbx_lock_pf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+	u32 p2v_mailbox;
+
+	/* Take ownership of the buffer */
+	IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_PFU);
+
+	/* reserve mailbox for vf use */
+	p2v_mailbox = IXGBE_READ_REG(hw, IXGBE_PFMAILBOX(vf_number));
+	if (p2v_mailbox & IXGBE_PFMAILBOX_PFU)
+		return 0;
+
+	return IXGBE_ERR_MBX;
+}
+
+/**
+ *  ixgbe_write_mbx_pf - Places a message in the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf_number: the VF index
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 ixgbe_write_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+			      u16 vf_number)
+{
+	s32 ret_val;
+	u16 i;
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
+		return ret_val;
+
+	/* flush msg and acks as we are overwriting the message buffer */
+	ixgbe_check_for_msg_pf(hw, vf_number);
+	ixgbe_check_for_ack_pf(hw, vf_number);
+
+	/* copy the caller specified message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i, msg[i]);
+
+	/* Interrupt VF to tell it a message has been sent and release buffer*/
+	IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_STS);
+
+	/* update stats */
+	hw->mbx.stats.msgs_tx++;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_mbx_pf - Read a message from the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *  @vf_number: the VF index
+ *
+ *  This function copies a message from the mailbox buffer to the caller's
+ *  memory buffer.  The presumption is that the caller knows that there was
+ *  a message due to a VF request so no polling for message is needed.
+ **/
+static s32 ixgbe_read_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+			     u16 vf_number)
+{
+	s32 ret_val;
+	u16 i;
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
+		return ret_val;
+
+	/* copy the message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i);
+
+	/* Acknowledge the message and release buffer */
+	IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_ACK);
+
+	/* update stats */
+	hw->mbx.stats.msgs_rx++;
+
+	return 0;
+}
+
+#ifdef CONFIG_PCI_IOV
+/**
+ *  ixgbe_init_mbx_params_pf - set initial values for pf mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the hw->mbx struct to correct values for pf mailbox
+ */
+void ixgbe_init_mbx_params_pf(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+	if (hw->mac.type != ixgbe_mac_82599EB &&
+	    hw->mac.type != ixgbe_mac_X550 &&
+	    hw->mac.type != ixgbe_mac_X550EM_x &&
+	    hw->mac.type != ixgbe_mac_X540)
+		return;
+
+	mbx->timeout = 0;
+	mbx->usec_delay = 0;
+
+	mbx->stats.msgs_tx = 0;
+	mbx->stats.msgs_rx = 0;
+	mbx->stats.reqs = 0;
+	mbx->stats.acks = 0;
+	mbx->stats.rsts = 0;
+
+	mbx->size = IXGBE_VFMAILBOX_SIZE;
+}
+#endif /* CONFIG_PCI_IOV */
+
+struct ixgbe_mbx_operations mbx_ops_generic = {
+	.read                   = ixgbe_read_mbx_pf,
+	.write                  = ixgbe_write_mbx_pf,
+	.read_posted            = ixgbe_read_posted_mbx,
+	.write_posted           = ixgbe_write_posted_mbx,
+	.check_for_msg          = ixgbe_check_for_msg_pf,
+	.check_for_ack          = ixgbe_check_for_ack_pf,
+	.check_for_rst          = ixgbe_check_for_rst_pf,
+};
+
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
new file mode 100644
index 000000000..b1e4703ff
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
@@ -0,0 +1,126 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_MBX_H_
+#define _IXGBE_MBX_H_
+
+#include "ixgbe_type.h"
+
+#define IXGBE_VFMAILBOX_SIZE        16 /* 16 32 bit words - 64 bytes */
+#define IXGBE_ERR_MBX               -100
+
+#define IXGBE_VFMAILBOX             0x002FC
+#define IXGBE_VFMBMEM               0x00200
+
+#define IXGBE_PFMAILBOX_STS   0x00000001 /* Initiate message send to VF */
+#define IXGBE_PFMAILBOX_ACK   0x00000002 /* Ack message recv'd from VF */
+#define IXGBE_PFMAILBOX_VFU   0x00000004 /* VF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_PFU   0x00000008 /* PF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_RVFU  0x00000010 /* Reset VFU - used when VF stuck */
+
+#define IXGBE_MBVFICR_VFREQ_MASK 0x0000FFFF /* bits for VF messages */
+#define IXGBE_MBVFICR_VFREQ_VF1  0x00000001 /* bit for VF 1 message */
+#define IXGBE_MBVFICR_VFACK_MASK 0xFFFF0000 /* bits for VF acks */
+#define IXGBE_MBVFICR_VFACK_VF1  0x00010000 /* bit for VF 1 ack */
+
+
+/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the
+ * PF.  The reverse is true if it is IXGBE_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define IXGBE_VT_MSGTYPE_ACK      0x80000000  /* Messages below or'd with
+					       * this are the ACK */
+#define IXGBE_VT_MSGTYPE_NACK     0x40000000  /* Messages below or'd with
+					       * this are the NACK */
+#define IXGBE_VT_MSGTYPE_CTS      0x20000000  /* Indicates that VF is still
+						 clear to send requests */
+#define IXGBE_VT_MSGINFO_SHIFT    16
+/* bits 23:16 are used for exra info for certain messages */
+#define IXGBE_VT_MSGINFO_MASK     (0xFF << IXGBE_VT_MSGINFO_SHIFT)
+
+/* definitions to support mailbox API version negotiation */
+
+/*
+ * Each element denotes a version of the API; existing numbers may not
+ * change; any additions must go at the end
+ */
+enum ixgbe_pfvf_api_rev {
+	ixgbe_mbox_api_10,	/* API version 1.0, linux/freebsd VF driver */
+	ixgbe_mbox_api_20,	/* API version 2.0, solaris Phase1 VF driver */
+	ixgbe_mbox_api_11,	/* API version 1.1, linux/freebsd VF driver */
+	ixgbe_mbox_api_12,	/* API version 1.2, linux/freebsd VF driver */
+	/* This value should always be last */
+	ixgbe_mbox_api_unknown,	/* indicates that API version is not known */
+};
+
+/* mailbox API, legacy requests */
+#define IXGBE_VF_RESET            0x01 /* VF requests reset */
+#define IXGBE_VF_SET_MAC_ADDR     0x02 /* VF requests PF to set MAC addr */
+#define IXGBE_VF_SET_MULTICAST    0x03 /* VF requests PF to set MC addr */
+#define IXGBE_VF_SET_VLAN         0x04 /* VF requests PF to set VLAN */
+
+/* mailbox API, version 1.0 VF requests */
+#define IXGBE_VF_SET_LPE	0x05 /* VF requests PF to set VMOLR.LPE */
+#define IXGBE_VF_SET_MACVLAN	0x06 /* VF requests PF for unicast filter */
+#define IXGBE_VF_API_NEGOTIATE	0x08 /* negotiate API version */
+
+/* mailbox API, version 1.1 VF requests */
+#define IXGBE_VF_GET_QUEUES	0x09 /* get queue configuration */
+
+/* GET_QUEUES return data indices within the mailbox */
+#define IXGBE_VF_TX_QUEUES	1	/* number of Tx queues supported */
+#define IXGBE_VF_RX_QUEUES	2	/* number of Rx queues supported */
+#define IXGBE_VF_TRANS_VLAN	3	/* Indication of port vlan */
+#define IXGBE_VF_DEF_QUEUE	4	/* Default queue offset */
+
+/* mailbox API, version 1.2 VF requests */
+#define IXGBE_VF_GET_RETA	0x0a	/* VF request for RETA */
+#define IXGBE_VF_GET_RSS_KEY	0x0b	/* get RSS key */
+
+/* length of permanent address message returned from PF */
+#define IXGBE_VF_PERMADDR_MSG_LEN 4
+/* word in permanent address message with the current multicast type */
+#define IXGBE_VF_MC_TYPE_WORD     3
+
+#define IXGBE_PF_CONTROL_MSG      0x0100 /* PF control message */
+
+#define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
+#define IXGBE_VF_MBX_INIT_DELAY   500  /* microseconds between retries */
+
+s32 ixgbe_read_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_write_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_check_for_msg(struct ixgbe_hw *, u16);
+s32 ixgbe_check_for_ack(struct ixgbe_hw *, u16);
+s32 ixgbe_check_for_rst(struct ixgbe_hw *, u16);
+#ifdef CONFIG_PCI_IOV
+void ixgbe_init_mbx_params_pf(struct ixgbe_hw *);
+#endif /* CONFIG_PCI_IOV */
+
+extern struct ixgbe_mbx_operations mbx_ops_generic;
+
+#endif /* _IXGBE_MBX_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
new file mode 100644
index 000000000..8a2be4441
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -0,0 +1,2139 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+
+static void ixgbe_i2c_start(struct ixgbe_hw *hw);
+static void ixgbe_i2c_stop(struct ixgbe_hw *hw);
+static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data);
+static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data);
+static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw);
+static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
+static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
+static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
+static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl);
+static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw);
+static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
+static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
+static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw);
+
+/**
+ *  ixgbe_out_i2c_byte_ack - Send I2C byte with ack
+ *  @hw: pointer to the hardware structure
+ *  @byte: byte to send
+ *
+ *  Returns an error code on error.
+ **/
+static s32 ixgbe_out_i2c_byte_ack(struct ixgbe_hw *hw, u8 byte)
+{
+	s32 status;
+
+	status = ixgbe_clock_out_i2c_byte(hw, byte);
+	if (status)
+		return status;
+	return ixgbe_get_i2c_ack(hw);
+}
+
+/**
+ *  ixgbe_in_i2c_byte_ack - Receive an I2C byte and send ack
+ *  @hw: pointer to the hardware structure
+ *  @byte: pointer to a u8 to receive the byte
+ *
+ *  Returns an error code on error.
+ **/
+static s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte)
+{
+	s32 status;
+
+	status = ixgbe_clock_in_i2c_byte(hw, byte);
+	if (status)
+		return status;
+	/* ACK */
+	return ixgbe_clock_out_i2c_bit(hw, false);
+}
+
+/**
+ *  ixgbe_ones_comp_byte_add - Perform one's complement addition
+ *  @add1: addend 1
+ *  @add2: addend 2
+ *
+ *  Returns one's complement 8-bit sum.
+ **/
+static u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2)
+{
+	u16 sum = add1 + add2;
+
+	sum = (sum & 0xFF) + (sum >> 8);
+	return sum & 0xFF;
+}
+
+/**
+ *  ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
+ *  @hw: pointer to the hardware structure
+ *  @addr: I2C bus address to read from
+ *  @reg: I2C device register to read from
+ *  @val: pointer to location to receive read value
+ *
+ *  Returns an error code on error.
+ **/
+s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
+				    u16 reg, u16 *val)
+{
+	u32 swfw_mask = hw->phy.phy_semaphore_mask;
+	int max_retry = 10;
+	int retry = 0;
+	u8 csum_byte;
+	u8 high_bits;
+	u8 low_bits;
+	u8 reg_high;
+	u8 csum;
+
+	reg_high = ((reg >> 7) & 0xFE) | 1;     /* Indicate read combined */
+	csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+	csum = ~csum;
+	do {
+		if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+			return IXGBE_ERR_SWFW_SYNC;
+		ixgbe_i2c_start(hw);
+		/* Device Address and write indication */
+		if (ixgbe_out_i2c_byte_ack(hw, addr))
+			goto fail;
+		/* Write bits 14:8 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+			goto fail;
+		/* Write bits 7:0 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+			goto fail;
+		/* Write csum */
+		if (ixgbe_out_i2c_byte_ack(hw, csum))
+			goto fail;
+		/* Re-start condition */
+		ixgbe_i2c_start(hw);
+		/* Device Address and read indication */
+		if (ixgbe_out_i2c_byte_ack(hw, addr | 1))
+			goto fail;
+		/* Get upper bits */
+		if (ixgbe_in_i2c_byte_ack(hw, &high_bits))
+			goto fail;
+		/* Get low bits */
+		if (ixgbe_in_i2c_byte_ack(hw, &low_bits))
+			goto fail;
+		/* Get csum */
+		if (ixgbe_clock_in_i2c_byte(hw, &csum_byte))
+			goto fail;
+		/* NACK */
+		if (ixgbe_clock_out_i2c_bit(hw, false))
+			goto fail;
+		ixgbe_i2c_stop(hw);
+		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		*val = (high_bits << 8) | low_bits;
+		return 0;
+
+fail:
+		ixgbe_i2c_bus_clear(hw);
+		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		retry++;
+		if (retry < max_retry)
+			hw_dbg(hw, "I2C byte read combined error - Retry.\n");
+		else
+			hw_dbg(hw, "I2C byte read combined error.\n");
+	} while (retry < max_retry);
+
+	return IXGBE_ERR_I2C;
+}
+
+/**
+ *  ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
+ *  @hw: pointer to the hardware structure
+ *  @addr: I2C bus address to write to
+ *  @reg: I2C device register to write to
+ *  @val: value to write
+ *
+ *  Returns an error code on error.
+ **/
+s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
+				     u8 addr, u16 reg, u16 val)
+{
+	int max_retry = 1;
+	int retry = 0;
+	u8 reg_high;
+	u8 csum;
+
+	reg_high = (reg >> 7) & 0xFE;   /* Indicate write combined */
+	csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+	csum = ixgbe_ones_comp_byte_add(csum, val >> 8);
+	csum = ixgbe_ones_comp_byte_add(csum, val & 0xFF);
+	csum = ~csum;
+	do {
+		ixgbe_i2c_start(hw);
+		/* Device Address and write indication */
+		if (ixgbe_out_i2c_byte_ack(hw, addr))
+			goto fail;
+		/* Write bits 14:8 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+			goto fail;
+		/* Write bits 7:0 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+			goto fail;
+		/* Write data 15:8 */
+		if (ixgbe_out_i2c_byte_ack(hw, val >> 8))
+			goto fail;
+		/* Write data 7:0 */
+		if (ixgbe_out_i2c_byte_ack(hw, val & 0xFF))
+			goto fail;
+		/* Write csum */
+		if (ixgbe_out_i2c_byte_ack(hw, csum))
+			goto fail;
+		ixgbe_i2c_stop(hw);
+		return 0;
+
+fail:
+		ixgbe_i2c_bus_clear(hw);
+		retry++;
+		if (retry < max_retry)
+			hw_dbg(hw, "I2C byte write combined error - Retry.\n");
+		else
+			hw_dbg(hw, "I2C byte write combined error.\n");
+	} while (retry < max_retry);
+
+	return IXGBE_ERR_I2C;
+}
+
+/**
+ *  ixgbe_identify_phy_generic - Get physical layer module
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
+{
+	u32 phy_addr;
+	u16 ext_ability = 0;
+
+	if (!hw->phy.phy_semaphore_mask) {
+		hw->phy.lan_id = IXGBE_READ_REG(hw, IXGBE_STATUS) &
+				 IXGBE_STATUS_LAN_ID_1;
+		if (hw->phy.lan_id)
+			hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
+		else
+			hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
+	}
+
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+			hw->phy.mdio.prtad = phy_addr;
+			if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
+				ixgbe_get_phy_id(hw);
+				hw->phy.type =
+					ixgbe_get_phy_type_from_id(hw->phy.id);
+
+				if (hw->phy.type == ixgbe_phy_unknown) {
+					hw->phy.ops.read_reg(hw,
+							     MDIO_PMA_EXTABLE,
+							     MDIO_MMD_PMAPMD,
+							     &ext_ability);
+					if (ext_ability &
+					    (MDIO_PMA_EXTABLE_10GBT |
+					     MDIO_PMA_EXTABLE_1000BT))
+						hw->phy.type =
+							 ixgbe_phy_cu_unknown;
+					else
+						hw->phy.type =
+							 ixgbe_phy_generic;
+				}
+
+				return 0;
+			}
+		}
+		/* clear value if nothing found */
+		hw->phy.mdio.prtad = 0;
+		return IXGBE_ERR_PHY_ADDR_INVALID;
+	}
+	return 0;
+}
+
+/**
+ * ixgbe_check_reset_blocked - check status of MNG FW veto bit
+ * @hw: pointer to the hardware structure
+ *
+ * This function checks the MMNGC.MNG_VETO bit to see if there are
+ * any constraints on link from manageability.  For MAC's that don't
+ * have this bit just return false since the link can not be blocked
+ * via this method.
+ **/
+bool ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
+{
+	u32 mmngc;
+
+	/* If we don't have this bit, it can't be blocking */
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return false;
+
+	mmngc = IXGBE_READ_REG(hw, IXGBE_MMNGC);
+	if (mmngc & IXGBE_MMNGC_MNG_VETO) {
+		hw_dbg(hw, "MNG_VETO bit detected.\n");
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ *  ixgbe_get_phy_id - Get the phy type
+ *  @hw: pointer to hardware structure
+ *
+ **/
+static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
+{
+	u32 status;
+	u16 phy_id_high = 0;
+	u16 phy_id_low = 0;
+
+	status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD,
+				      &phy_id_high);
+
+	if (status == 0) {
+		hw->phy.id = (u32)(phy_id_high << 16);
+		status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD,
+					      &phy_id_low);
+		hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
+		hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_get_phy_type_from_id - Get the phy type
+ *  @hw: pointer to hardware structure
+ *
+ **/
+static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
+{
+	enum ixgbe_phy_type phy_type;
+
+	switch (phy_id) {
+	case TN1010_PHY_ID:
+		phy_type = ixgbe_phy_tn;
+		break;
+	case X540_PHY_ID:
+		phy_type = ixgbe_phy_aq;
+		break;
+	case QT2022_PHY_ID:
+		phy_type = ixgbe_phy_qt;
+		break;
+	case ATH_PHY_ID:
+		phy_type = ixgbe_phy_nl;
+		break;
+	default:
+		phy_type = ixgbe_phy_unknown;
+		break;
+	}
+
+	return phy_type;
+}
+
+/**
+ *  ixgbe_reset_phy_generic - Performs a PHY reset
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u16 ctrl = 0;
+	s32 status = 0;
+
+	if (hw->phy.type == ixgbe_phy_unknown)
+		status = ixgbe_identify_phy_generic(hw);
+
+	if (status != 0 || hw->phy.type == ixgbe_phy_none)
+		return status;
+
+	/* Don't reset PHY if it's shut down due to overtemp. */
+	if (!hw->phy.reset_if_overtemp &&
+	    (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw)))
+		return 0;
+
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		return 0;
+
+	/*
+	 * Perform soft PHY reset to the PHY_XS.
+	 * This will cause a soft reset to the PHY
+	 */
+	hw->phy.ops.write_reg(hw, MDIO_CTRL1,
+			      MDIO_MMD_PHYXS,
+			      MDIO_CTRL1_RESET);
+
+	/*
+	 * Poll for reset bit to self-clear indicating reset is complete.
+	 * Some PHYs could take up to 3 seconds to complete and need about
+	 * 1.7 usec delay after the reset is complete.
+	 */
+	for (i = 0; i < 30; i++) {
+		msleep(100);
+		hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+				     MDIO_MMD_PHYXS, &ctrl);
+		if (!(ctrl & MDIO_CTRL1_RESET)) {
+			udelay(2);
+			break;
+		}
+	}
+
+	if (ctrl & MDIO_CTRL1_RESET) {
+		hw_dbg(hw, "PHY reset polling failed to complete.\n");
+		return IXGBE_ERR_RESET_FAILED;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_phy_mdi - Reads a value from a specified PHY register without
+ *  the SWFW lock
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit address of PHY register to read
+ *  @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+		       u16 *phy_data)
+{
+	u32 i, data, command;
+
+	/* Setup and write the address cycle command */
+	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+		   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+		   (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		   (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+	/* Check every 10 usec to see if the address cycle completed.
+	 * The MDI Command bit will clear when the operation is
+	 * complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		udelay(10);
+
+		command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+		if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+				break;
+	}
+
+
+	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+		hw_dbg(hw, "PHY address command did not complete.\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	/* Address cycle complete, setup and write the read
+	 * command
+	 */
+	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+		   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+		   (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		   (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
+
+	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+	/* Check every 10 usec to see if the address cycle
+	 * completed. The MDI Command bit will clear when the
+	 * operation is complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		udelay(10);
+
+		command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+		if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+			break;
+	}
+
+	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+		hw_dbg(hw, "PHY read command didn't complete\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	/* Read operation is complete.  Get the data
+	 * from MSRWD
+	 */
+	data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
+	data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
+	*phy_data = (u16)(data);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
+ *  using the SWFW lock - this function is needed in most cases
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit address of PHY register to read
+ *  @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+			       u32 device_type, u16 *phy_data)
+{
+	s32 status;
+	u32 gssr = hw->phy.phy_semaphore_mask;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == 0) {
+		status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type,
+						phy_data);
+		hw->mac.ops.release_swfw_sync(hw, gssr);
+	} else {
+		return IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register
+ *  without SWFW lock
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 5 bit device type
+ *  @phy_data: Data to write to the PHY register
+ **/
+s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
+				u32 device_type, u16 phy_data)
+{
+	u32 i, command;
+
+	/* Put the data in the MDI single read and write data register*/
+	IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
+
+	/* Setup and write the address cycle command */
+	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+		   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+		   (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		   (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+	/*
+	 * Check every 10 usec to see if the address cycle completed.
+	 * The MDI Command bit will clear when the operation is
+	 * complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		udelay(10);
+
+		command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+		if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+			break;
+	}
+
+	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+		hw_dbg(hw, "PHY address cmd didn't complete\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	/*
+	 * Address cycle complete, setup and write the write
+	 * command
+	 */
+	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+		   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+		   (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		   (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
+
+	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+	/* Check every 10 usec to see if the address cycle
+	 * completed. The MDI Command bit will clear when the
+	 * operation is complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		udelay(10);
+
+		command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+		if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+			break;
+	}
+
+	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+		hw_dbg(hw, "PHY write cmd didn't complete\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
+ *  using SWFW lock- this function is needed in most cases
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 5 bit device type
+ *  @phy_data: Data to write to the PHY register
+ **/
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+				u32 device_type, u16 phy_data)
+{
+	s32 status;
+	u32 gssr;
+
+	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+		gssr = IXGBE_GSSR_PHY1_SM;
+	else
+		gssr = IXGBE_GSSR_PHY0_SM;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == 0) {
+		status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type,
+						 phy_data);
+		hw->mac.ops.release_swfw_sync(hw, gssr);
+	} else {
+		return IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_phy_link_generic - Set and restart autoneg
+ *  @hw: pointer to hardware structure
+ *
+ *  Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+	bool autoneg = false;
+	ixgbe_link_speed speed;
+
+	ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+		/* Set or unset auto-negotiation 10G advertisement */
+		hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
+				     MDIO_MMD_AN,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+			autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
+
+		hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL,
+				      MDIO_MMD_AN,
+				      autoneg_reg);
+	}
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+		/* Set or unset auto-negotiation 1G advertisement */
+		hw->phy.ops.read_reg(hw,
+				     IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+				     MDIO_MMD_AN,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+			autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
+
+		hw->phy.ops.write_reg(hw,
+				      IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+				      MDIO_MMD_AN,
+				      autoneg_reg);
+	}
+
+	if (speed & IXGBE_LINK_SPEED_100_FULL) {
+		/* Set or unset auto-negotiation 100M advertisement */
+		hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+				     MDIO_MMD_AN,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~(ADVERTISE_100FULL |
+				 ADVERTISE_100HALF);
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+			autoneg_reg |= ADVERTISE_100FULL;
+
+		hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
+				      MDIO_MMD_AN,
+				      autoneg_reg);
+	}
+
+	/* Blocked by MNG FW so don't reset PHY */
+	if (ixgbe_check_reset_blocked(hw))
+		return 0;
+
+	/* Restart PHY autonegotiation and wait for completion */
+	hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+			     MDIO_MMD_AN, &autoneg_reg);
+
+	autoneg_reg |= MDIO_AN_CTRL1_RESTART;
+
+	hw->phy.ops.write_reg(hw, MDIO_CTRL1,
+			      MDIO_MMD_AN, autoneg_reg);
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ **/
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+				       ixgbe_link_speed speed,
+				       bool autoneg_wait_to_complete)
+{
+
+	/*
+	 * Clear autoneg_advertised and set new values based on input link
+	 * speed.
+	 */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_100_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+	/* Setup link based on the new speed settings */
+	hw->phy.ops.setup_link(hw);
+
+	return 0;
+}
+
+/**
+ * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ */
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+					       ixgbe_link_speed *speed,
+					       bool *autoneg)
+{
+	s32 status;
+	u16 speed_ability;
+
+	*speed = 0;
+	*autoneg = true;
+
+	status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
+				      &speed_ability);
+
+	if (status == 0) {
+		if (speed_ability & MDIO_SPEED_10G)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (speed_ability & MDIO_PMA_SPEED_1000)
+			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
+		if (speed_ability & MDIO_PMA_SPEED_100)
+			*speed |= IXGBE_LINK_SPEED_100_FULL;
+	}
+
+	/* Internal PHY does not support 100 Mbps */
+	if (hw->mac.type == ixgbe_mac_X550EM_x)
+		*speed &= ~IXGBE_LINK_SPEED_100_FULL;
+
+	return status;
+}
+
+/**
+ *  ixgbe_check_phy_link_tnx - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads the VS1 register to determine if link is up and the current speed for
+ *  the PHY.
+ **/
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			     bool *link_up)
+{
+	s32 status;
+	u32 time_out;
+	u32 max_time_out = 10;
+	u16 phy_link = 0;
+	u16 phy_speed = 0;
+	u16 phy_data = 0;
+
+	/* Initialize speed and link to default case */
+	*link_up = false;
+	*speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+	/*
+	 * Check current speed and link status of the PHY register.
+	 * This is a vendor specific register and may have to
+	 * be changed for other copper PHYs.
+	 */
+	for (time_out = 0; time_out < max_time_out; time_out++) {
+		udelay(10);
+		status = hw->phy.ops.read_reg(hw,
+					      MDIO_STAT1,
+					      MDIO_MMD_VEND1,
+					      &phy_data);
+		phy_link = phy_data &
+			    IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
+		phy_speed = phy_data &
+			    IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
+		if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
+			*link_up = true;
+			if (phy_speed ==
+			    IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
+				*speed = IXGBE_LINK_SPEED_1GB_FULL;
+			break;
+		}
+	}
+
+	return status;
+}
+
+/**
+ *	ixgbe_setup_phy_link_tnx - Set and restart autoneg
+ *	@hw: pointer to hardware structure
+ *
+ *	Restart autonegotiation and PHY and waits for completion.
+ *      This function always returns success, this is nessary since
+ *	it is called via a function pointer that could call other
+ *	functions that could return an error.
+ **/
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
+{
+	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+	bool autoneg = false;
+	ixgbe_link_speed speed;
+
+	ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+		/* Set or unset auto-negotiation 10G advertisement */
+		hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
+				     MDIO_MMD_AN,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+			autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
+
+		hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL,
+				      MDIO_MMD_AN,
+				      autoneg_reg);
+	}
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+		/* Set or unset auto-negotiation 1G advertisement */
+		hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+				     MDIO_MMD_AN,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+			autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+
+		hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+				      MDIO_MMD_AN,
+				      autoneg_reg);
+	}
+
+	if (speed & IXGBE_LINK_SPEED_100_FULL) {
+		/* Set or unset auto-negotiation 100M advertisement */
+		hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+				     MDIO_MMD_AN,
+				     &autoneg_reg);
+
+		autoneg_reg &= ~(ADVERTISE_100FULL |
+				 ADVERTISE_100HALF);
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+			autoneg_reg |= ADVERTISE_100FULL;
+
+		hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
+				      MDIO_MMD_AN,
+				      autoneg_reg);
+	}
+
+	/* Blocked by MNG FW so don't reset PHY */
+	if (ixgbe_check_reset_blocked(hw))
+		return 0;
+
+	/* Restart PHY autonegotiation and wait for completion */
+	hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+			     MDIO_MMD_AN, &autoneg_reg);
+
+	autoneg_reg |= MDIO_AN_CTRL1_RESTART;
+
+	hw->phy.ops.write_reg(hw, MDIO_CTRL1,
+			      MDIO_MMD_AN, autoneg_reg);
+	return 0;
+}
+
+/**
+ *  ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+				       u16 *firmware_version)
+{
+	s32 status;
+
+	status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
+				      MDIO_MMD_VEND1,
+				      firmware_version);
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+					   u16 *firmware_version)
+{
+	s32 status;
+
+	status = hw->phy.ops.read_reg(hw, AQ_FW_REV,
+				      MDIO_MMD_VEND1,
+				      firmware_version);
+
+	return status;
+}
+
+/**
+ *  ixgbe_reset_phy_nl - Performs a PHY reset
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
+{
+	u16 phy_offset, control, eword, edata, block_crc;
+	bool end_data = false;
+	u16 list_offset, data_offset;
+	u16 phy_data = 0;
+	s32 ret_val;
+	u32 i;
+
+	/* Blocked by MNG FW so bail */
+	if (ixgbe_check_reset_blocked(hw))
+		return 0;
+
+	hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &phy_data);
+
+	/* reset the PHY and poll for completion */
+	hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
+			      (phy_data | MDIO_CTRL1_RESET));
+
+	for (i = 0; i < 100; i++) {
+		hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
+				     &phy_data);
+		if ((phy_data & MDIO_CTRL1_RESET) == 0)
+			break;
+		usleep_range(10000, 20000);
+	}
+
+	if ((phy_data & MDIO_CTRL1_RESET) != 0) {
+		hw_dbg(hw, "PHY reset did not complete.\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	/* Get init offsets */
+	ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+						      &data_offset);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
+	data_offset++;
+	while (!end_data) {
+		/*
+		 * Read control word from PHY init contents offset
+		 */
+		ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
+		if (ret_val)
+			goto err_eeprom;
+		control = (eword & IXGBE_CONTROL_MASK_NL) >>
+			   IXGBE_CONTROL_SHIFT_NL;
+		edata = eword & IXGBE_DATA_MASK_NL;
+		switch (control) {
+		case IXGBE_DELAY_NL:
+			data_offset++;
+			hw_dbg(hw, "DELAY: %d MS\n", edata);
+			usleep_range(edata * 1000, edata * 2000);
+			break;
+		case IXGBE_DATA_NL:
+			hw_dbg(hw, "DATA:\n");
+			data_offset++;
+			ret_val = hw->eeprom.ops.read(hw, data_offset++,
+						      &phy_offset);
+			if (ret_val)
+				goto err_eeprom;
+			for (i = 0; i < edata; i++) {
+				ret_val = hw->eeprom.ops.read(hw, data_offset,
+							      &eword);
+				if (ret_val)
+					goto err_eeprom;
+				hw->phy.ops.write_reg(hw, phy_offset,
+						      MDIO_MMD_PMAPMD, eword);
+				hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,
+				       phy_offset);
+				data_offset++;
+				phy_offset++;
+			}
+			break;
+		case IXGBE_CONTROL_NL:
+			data_offset++;
+			hw_dbg(hw, "CONTROL:\n");
+			if (edata == IXGBE_CONTROL_EOL_NL) {
+				hw_dbg(hw, "EOL\n");
+				end_data = true;
+			} else if (edata == IXGBE_CONTROL_SOL_NL) {
+				hw_dbg(hw, "SOL\n");
+			} else {
+				hw_dbg(hw, "Bad control value\n");
+				return IXGBE_ERR_PHY;
+			}
+			break;
+		default:
+			hw_dbg(hw, "Bad control type\n");
+			return IXGBE_ERR_PHY;
+		}
+	}
+
+	return ret_val;
+
+err_eeprom:
+	hw_err(hw, "eeprom read at offset %d failed\n", data_offset);
+	return IXGBE_ERR_PHY;
+}
+
+/**
+ *  ixgbe_identify_module_generic - Identifies module type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines HW type and calls appropriate function.
+ **/
+s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
+{
+	switch (hw->mac.ops.get_media_type(hw)) {
+	case ixgbe_media_type_fiber:
+		return ixgbe_identify_sfp_module_generic(hw);
+	case ixgbe_media_type_fiber_qsfp:
+		return ixgbe_identify_qsfp_module_generic(hw);
+	default:
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		return IXGBE_ERR_SFP_NOT_PRESENT;
+	}
+
+	return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+/**
+ *  ixgbe_identify_sfp_module_generic - Identifies SFP modules
+ *  @hw: pointer to hardware structure
+ *
+ *  Searches for and identifies the SFP module and assigns appropriate PHY type.
+ **/
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+	s32 status;
+	u32 vendor_oui = 0;
+	enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+	u8 identifier = 0;
+	u8 comp_codes_1g = 0;
+	u8 comp_codes_10g = 0;
+	u8 oui_bytes[3] = {0, 0, 0};
+	u8 cable_tech = 0;
+	u8 cable_spec = 0;
+	u16 enforce_sfp = 0;
+
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		return IXGBE_ERR_SFP_NOT_PRESENT;
+	}
+
+	status = hw->phy.ops.read_i2c_eeprom(hw,
+					     IXGBE_SFF_IDENTIFIER,
+					     &identifier);
+
+	if (status)
+		goto err_read_i2c_eeprom;
+
+	/* LAN ID is needed for sfp_type determination */
+	hw->mac.ops.set_lan_id(hw);
+
+	if (identifier != IXGBE_SFF_IDENTIFIER_SFP) {
+		hw->phy.type = ixgbe_phy_sfp_unsupported;
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+	}
+	status = hw->phy.ops.read_i2c_eeprom(hw,
+					     IXGBE_SFF_1GBE_COMP_CODES,
+					     &comp_codes_1g);
+
+	if (status)
+		goto err_read_i2c_eeprom;
+
+	status = hw->phy.ops.read_i2c_eeprom(hw,
+					     IXGBE_SFF_10GBE_COMP_CODES,
+					     &comp_codes_10g);
+
+	if (status)
+		goto err_read_i2c_eeprom;
+	status = hw->phy.ops.read_i2c_eeprom(hw,
+					     IXGBE_SFF_CABLE_TECHNOLOGY,
+					     &cable_tech);
+
+	if (status)
+		goto err_read_i2c_eeprom;
+
+	 /* ID Module
+	  * =========
+	  * 0   SFP_DA_CU
+	  * 1   SFP_SR
+	  * 2   SFP_LR
+	  * 3   SFP_DA_CORE0 - 82599-specific
+	  * 4   SFP_DA_CORE1 - 82599-specific
+	  * 5   SFP_SR/LR_CORE0 - 82599-specific
+	  * 6   SFP_SR/LR_CORE1 - 82599-specific
+	  * 7   SFP_act_lmt_DA_CORE0 - 82599-specific
+	  * 8   SFP_act_lmt_DA_CORE1 - 82599-specific
+	  * 9   SFP_1g_cu_CORE0 - 82599-specific
+	  * 10  SFP_1g_cu_CORE1 - 82599-specific
+	  * 11  SFP_1g_sx_CORE0 - 82599-specific
+	  * 12  SFP_1g_sx_CORE1 - 82599-specific
+	  */
+	if (hw->mac.type == ixgbe_mac_82598EB) {
+		if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+			hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
+		else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+			hw->phy.sfp_type = ixgbe_sfp_type_sr;
+		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+			hw->phy.sfp_type = ixgbe_sfp_type_lr;
+		else
+			hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+	} else if (hw->mac.type == ixgbe_mac_82599EB) {
+		if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
+			if (hw->bus.lan_id == 0)
+				hw->phy.sfp_type =
+					     ixgbe_sfp_type_da_cu_core0;
+			else
+				hw->phy.sfp_type =
+					     ixgbe_sfp_type_da_cu_core1;
+		} else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) {
+			hw->phy.ops.read_i2c_eeprom(
+					hw, IXGBE_SFF_CABLE_SPEC_COMP,
+					&cable_spec);
+			if (cable_spec &
+			    IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) {
+				if (hw->bus.lan_id == 0)
+					hw->phy.sfp_type =
+					ixgbe_sfp_type_da_act_lmt_core0;
+				else
+					hw->phy.sfp_type =
+					ixgbe_sfp_type_da_act_lmt_core1;
+			} else {
+				hw->phy.sfp_type =
+						ixgbe_sfp_type_unknown;
+			}
+		} else if (comp_codes_10g &
+			   (IXGBE_SFF_10GBASESR_CAPABLE |
+			    IXGBE_SFF_10GBASELR_CAPABLE)) {
+			if (hw->bus.lan_id == 0)
+				hw->phy.sfp_type =
+					      ixgbe_sfp_type_srlr_core0;
+			else
+				hw->phy.sfp_type =
+					      ixgbe_sfp_type_srlr_core1;
+		} else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) {
+			if (hw->bus.lan_id == 0)
+				hw->phy.sfp_type =
+					ixgbe_sfp_type_1g_cu_core0;
+			else
+				hw->phy.sfp_type =
+					ixgbe_sfp_type_1g_cu_core1;
+		} else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) {
+			if (hw->bus.lan_id == 0)
+				hw->phy.sfp_type =
+					ixgbe_sfp_type_1g_sx_core0;
+			else
+				hw->phy.sfp_type =
+					ixgbe_sfp_type_1g_sx_core1;
+		} else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) {
+			if (hw->bus.lan_id == 0)
+				hw->phy.sfp_type =
+					ixgbe_sfp_type_1g_lx_core0;
+			else
+				hw->phy.sfp_type =
+					ixgbe_sfp_type_1g_lx_core1;
+		} else {
+			hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+		}
+	}
+
+	if (hw->phy.sfp_type != stored_sfp_type)
+		hw->phy.sfp_setup_needed = true;
+
+	/* Determine if the SFP+ PHY is dual speed or not. */
+	hw->phy.multispeed_fiber = false;
+	if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+	     (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+	    ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+	     (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+		hw->phy.multispeed_fiber = true;
+
+	/* Determine PHY vendor */
+	if (hw->phy.type != ixgbe_phy_nl) {
+		hw->phy.id = identifier;
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					    IXGBE_SFF_VENDOR_OUI_BYTE0,
+					    &oui_bytes[0]);
+
+		if (status != 0)
+			goto err_read_i2c_eeprom;
+
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					    IXGBE_SFF_VENDOR_OUI_BYTE1,
+					    &oui_bytes[1]);
+
+		if (status != 0)
+			goto err_read_i2c_eeprom;
+
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					    IXGBE_SFF_VENDOR_OUI_BYTE2,
+					    &oui_bytes[2]);
+
+		if (status != 0)
+			goto err_read_i2c_eeprom;
+
+		vendor_oui =
+		  ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+		   (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+		   (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+		switch (vendor_oui) {
+		case IXGBE_SFF_VENDOR_OUI_TYCO:
+			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+				hw->phy.type =
+					    ixgbe_phy_sfp_passive_tyco;
+			break;
+		case IXGBE_SFF_VENDOR_OUI_FTL:
+			if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+				hw->phy.type = ixgbe_phy_sfp_ftl_active;
+			else
+				hw->phy.type = ixgbe_phy_sfp_ftl;
+			break;
+		case IXGBE_SFF_VENDOR_OUI_AVAGO:
+			hw->phy.type = ixgbe_phy_sfp_avago;
+			break;
+		case IXGBE_SFF_VENDOR_OUI_INTEL:
+			hw->phy.type = ixgbe_phy_sfp_intel;
+			break;
+		default:
+			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+				hw->phy.type =
+					 ixgbe_phy_sfp_passive_unknown;
+			else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+				hw->phy.type =
+					ixgbe_phy_sfp_active_unknown;
+			else
+				hw->phy.type = ixgbe_phy_sfp_unknown;
+			break;
+		}
+	}
+
+	/* Allow any DA cable vendor */
+	if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE |
+	    IXGBE_SFF_DA_ACTIVE_CABLE))
+		return 0;
+
+	/* Verify supported 1G SFP modules */
+	if (comp_codes_10g == 0 &&
+	    !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+	      hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+	      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+	      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+	      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+	      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
+		hw->phy.type = ixgbe_phy_sfp_unsupported;
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+	}
+
+	/* Anything else 82598-based is supported */
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return 0;
+
+	hw->mac.ops.get_device_caps(hw, &enforce_sfp);
+	if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
+	    !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+	      hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+	      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+	      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+	      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+	      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
+		/* Make sure we're a supported PHY type */
+		if (hw->phy.type == ixgbe_phy_sfp_intel)
+			return 0;
+		if (hw->allow_unsupported_sfp) {
+			e_warn(drv, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics.  Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter.  Intel Corporation is not responsible for any harm caused by using untested modules.\n");
+			return 0;
+		}
+		hw_dbg(hw, "SFP+ module not supported\n");
+		hw->phy.type = ixgbe_phy_sfp_unsupported;
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+	}
+	return 0;
+
+err_read_i2c_eeprom:
+	hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+	if (hw->phy.type != ixgbe_phy_nl) {
+		hw->phy.id = 0;
+		hw->phy.type = ixgbe_phy_unknown;
+	}
+	return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+/**
+ * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and identifies the QSFP module and assigns appropriate PHY type
+ **/
+static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+	s32 status;
+	u32 vendor_oui = 0;
+	enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+	u8 identifier = 0;
+	u8 comp_codes_1g = 0;
+	u8 comp_codes_10g = 0;
+	u8 oui_bytes[3] = {0, 0, 0};
+	u16 enforce_sfp = 0;
+	u8 connector = 0;
+	u8 cable_length = 0;
+	u8 device_tech = 0;
+	bool active_cable = false;
+
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) {
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		return IXGBE_ERR_SFP_NOT_PRESENT;
+	}
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
+					     &identifier);
+
+	if (status != 0)
+		goto err_read_i2c_eeprom;
+
+	if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) {
+		hw->phy.type = ixgbe_phy_sfp_unsupported;
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+	}
+
+	hw->phy.id = identifier;
+
+	/* LAN ID is needed for sfp_type determination */
+	hw->mac.ops.set_lan_id(hw);
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP,
+					     &comp_codes_10g);
+
+	if (status != 0)
+		goto err_read_i2c_eeprom;
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP,
+					     &comp_codes_1g);
+
+	if (status != 0)
+		goto err_read_i2c_eeprom;
+
+	if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
+		hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
+		if (hw->bus.lan_id == 0)
+			hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0;
+		else
+			hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1;
+	} else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+				     IXGBE_SFF_10GBASELR_CAPABLE)) {
+		if (hw->bus.lan_id == 0)
+			hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0;
+		else
+			hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1;
+	} else {
+		if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE)
+			active_cable = true;
+
+		if (!active_cable) {
+			/* check for active DA cables that pre-date
+			 * SFF-8436 v3.6
+			 */
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_CONNECTOR,
+					&connector);
+
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_CABLE_LENGTH,
+					&cable_length);
+
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_DEVICE_TECH,
+					&device_tech);
+
+			if ((connector ==
+				     IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE) &&
+			    (cable_length > 0) &&
+			    ((device_tech >> 4) ==
+				     IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL))
+				active_cable = true;
+		}
+
+		if (active_cable) {
+			hw->phy.type = ixgbe_phy_qsfp_active_unknown;
+			if (hw->bus.lan_id == 0)
+				hw->phy.sfp_type =
+						ixgbe_sfp_type_da_act_lmt_core0;
+			else
+				hw->phy.sfp_type =
+						ixgbe_sfp_type_da_act_lmt_core1;
+		} else {
+			/* unsupported module type */
+			hw->phy.type = ixgbe_phy_sfp_unsupported;
+			return IXGBE_ERR_SFP_NOT_SUPPORTED;
+		}
+	}
+
+	if (hw->phy.sfp_type != stored_sfp_type)
+		hw->phy.sfp_setup_needed = true;
+
+	/* Determine if the QSFP+ PHY is dual speed or not. */
+	hw->phy.multispeed_fiber = false;
+	if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+	     (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+	    ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+	     (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+		hw->phy.multispeed_fiber = true;
+
+	/* Determine PHY vendor for optical modules */
+	if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+			      IXGBE_SFF_10GBASELR_CAPABLE)) {
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0,
+					&oui_bytes[0]);
+
+		if (status != 0)
+			goto err_read_i2c_eeprom;
+
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1,
+					&oui_bytes[1]);
+
+		if (status != 0)
+			goto err_read_i2c_eeprom;
+
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2,
+					&oui_bytes[2]);
+
+		if (status != 0)
+			goto err_read_i2c_eeprom;
+
+		vendor_oui =
+			((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+			 (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+			 (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+		if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL)
+			hw->phy.type = ixgbe_phy_qsfp_intel;
+		else
+			hw->phy.type = ixgbe_phy_qsfp_unknown;
+
+		hw->mac.ops.get_device_caps(hw, &enforce_sfp);
+		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
+			/* Make sure we're a supported PHY type */
+			if (hw->phy.type == ixgbe_phy_qsfp_intel)
+				return 0;
+			if (hw->allow_unsupported_sfp) {
+				e_warn(drv, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.\n");
+				return 0;
+			}
+			hw_dbg(hw, "QSFP module not supported\n");
+			hw->phy.type = ixgbe_phy_sfp_unsupported;
+			return IXGBE_ERR_SFP_NOT_SUPPORTED;
+		}
+		return 0;
+	}
+	return 0;
+
+err_read_i2c_eeprom:
+	hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+	hw->phy.id = 0;
+	hw->phy.type = ixgbe_phy_unknown;
+
+	return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+/**
+ *  ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
+ *  @hw: pointer to hardware structure
+ *  @list_offset: offset to the SFP ID list
+ *  @data_offset: offset to the SFP data block
+ *
+ *  Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
+ *  so it returns the offsets to the phy init sequence block.
+ **/
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+					u16 *list_offset,
+					u16 *data_offset)
+{
+	u16 sfp_id;
+	u16 sfp_type = hw->phy.sfp_type;
+
+	if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+		return IXGBE_ERR_SFP_NOT_PRESENT;
+
+	if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
+	    (hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+	/*
+	 * Limiting active cables and 1G Phys must be initialized as
+	 * SR modules
+	 */
+	if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
+	    sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+	    sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+	    sfp_type == ixgbe_sfp_type_1g_sx_core0)
+		sfp_type = ixgbe_sfp_type_srlr_core0;
+	else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
+		 sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+		 sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+		 sfp_type == ixgbe_sfp_type_1g_sx_core1)
+		sfp_type = ixgbe_sfp_type_srlr_core1;
+
+	/* Read offset to PHY init contents */
+	if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) {
+		hw_err(hw, "eeprom read at %d failed\n",
+		       IXGBE_PHY_INIT_OFFSET_NL);
+		return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+	}
+
+	if ((!*list_offset) || (*list_offset == 0xFFFF))
+		return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+
+	/* Shift offset to first ID word */
+	(*list_offset)++;
+
+	/*
+	 * Find the matching SFP ID in the EEPROM
+	 * and program the init sequence
+	 */
+	if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+		goto err_phy;
+
+	while (sfp_id != IXGBE_PHY_INIT_END_NL) {
+		if (sfp_id == sfp_type) {
+			(*list_offset)++;
+			if (hw->eeprom.ops.read(hw, *list_offset, data_offset))
+				goto err_phy;
+			if ((!*data_offset) || (*data_offset == 0xFFFF)) {
+				hw_dbg(hw, "SFP+ module not supported\n");
+				return IXGBE_ERR_SFP_NOT_SUPPORTED;
+			} else {
+				break;
+			}
+		} else {
+			(*list_offset) += 2;
+			if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+				goto err_phy;
+		}
+	}
+
+	if (sfp_id == IXGBE_PHY_INIT_END_NL) {
+		hw_dbg(hw, "No matching SFP+ module found\n");
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+	}
+
+	return 0;
+
+err_phy:
+	hw_err(hw, "eeprom read at offset %d failed\n", *list_offset);
+	return IXGBE_ERR_PHY;
+}
+
+/**
+ *  ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: EEPROM byte offset to read
+ *  @eeprom_data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				  u8 *eeprom_data)
+{
+	return hw->phy.ops.read_i2c_byte(hw, byte_offset,
+					 IXGBE_I2C_EEPROM_DEV_ADDR,
+					 eeprom_data);
+}
+
+/**
+ *  ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset at address 0xA2
+ *  @eeprom_data: value read
+ *
+ *  Performs byte read operation to SFP module's SFF-8472 data over I2C
+ **/
+s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				   u8 *sff8472_data)
+{
+	return hw->phy.ops.read_i2c_byte(hw, byte_offset,
+					 IXGBE_I2C_EEPROM_DEV_ADDR2,
+					 sff8472_data);
+}
+
+/**
+ *  ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: EEPROM byte offset to write
+ *  @eeprom_data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				   u8 eeprom_data)
+{
+	return hw->phy.ops.write_i2c_byte(hw, byte_offset,
+					  IXGBE_I2C_EEPROM_DEV_ADDR,
+					  eeprom_data);
+}
+
+/**
+ *  ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @data: value read
+ *
+ *  Performs byte read operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				u8 dev_addr, u8 *data)
+{
+	s32 status;
+	u32 max_retry = 10;
+	u32 retry = 0;
+	u32 swfw_mask = hw->phy.phy_semaphore_mask;
+	bool nack = true;
+	*data = 0;
+
+	do {
+		if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+			return IXGBE_ERR_SWFW_SYNC;
+
+		ixgbe_i2c_start(hw);
+
+		/* Device Address and write indication */
+		status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+		if (status != 0)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != 0)
+			goto fail;
+
+		status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+		if (status != 0)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != 0)
+			goto fail;
+
+		ixgbe_i2c_start(hw);
+
+		/* Device Address and read indication */
+		status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1));
+		if (status != 0)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != 0)
+			goto fail;
+
+		status = ixgbe_clock_in_i2c_byte(hw, data);
+		if (status != 0)
+			goto fail;
+
+		status = ixgbe_clock_out_i2c_bit(hw, nack);
+		if (status != 0)
+			goto fail;
+
+		ixgbe_i2c_stop(hw);
+		break;
+
+fail:
+		ixgbe_i2c_bus_clear(hw);
+		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		msleep(100);
+		retry++;
+		if (retry < max_retry)
+			hw_dbg(hw, "I2C byte read error - Retrying.\n");
+		else
+			hw_dbg(hw, "I2C byte read error.\n");
+
+	} while (retry < max_retry);
+
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+	return status;
+}
+
+/**
+ *  ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @data: value to write
+ *
+ *  Performs byte write operation to SFP module's EEPROM over I2C interface at
+ *  a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 data)
+{
+	s32 status;
+	u32 max_retry = 1;
+	u32 retry = 0;
+	u32 swfw_mask = hw->phy.phy_semaphore_mask;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+		return IXGBE_ERR_SWFW_SYNC;
+
+	do {
+		ixgbe_i2c_start(hw);
+
+		status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+		if (status != 0)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != 0)
+			goto fail;
+
+		status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+		if (status != 0)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != 0)
+			goto fail;
+
+		status = ixgbe_clock_out_i2c_byte(hw, data);
+		if (status != 0)
+			goto fail;
+
+		status = ixgbe_get_i2c_ack(hw);
+		if (status != 0)
+			goto fail;
+
+		ixgbe_i2c_stop(hw);
+		break;
+
+fail:
+		ixgbe_i2c_bus_clear(hw);
+		retry++;
+		if (retry < max_retry)
+			hw_dbg(hw, "I2C byte write error - Retrying.\n");
+		else
+			hw_dbg(hw, "I2C byte write error.\n");
+	} while (retry < max_retry);
+
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+	return status;
+}
+
+/**
+ *  ixgbe_i2c_start - Sets I2C start condition
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets I2C start condition (High -> Low on SDA while SCL is High)
+ **/
+static void ixgbe_i2c_start(struct ixgbe_hw *hw)
+{
+	u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+	/* Start condition must begin with data and clock high */
+	ixgbe_set_i2c_data(hw, &i2cctl, 1);
+	ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+	/* Setup time for start condition (4.7us) */
+	udelay(IXGBE_I2C_T_SU_STA);
+
+	ixgbe_set_i2c_data(hw, &i2cctl, 0);
+
+	/* Hold time for start condition (4us) */
+	udelay(IXGBE_I2C_T_HD_STA);
+
+	ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	udelay(IXGBE_I2C_T_LOW);
+
+}
+
+/**
+ *  ixgbe_i2c_stop - Sets I2C stop condition
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets I2C stop condition (Low -> High on SDA while SCL is High)
+ **/
+static void ixgbe_i2c_stop(struct ixgbe_hw *hw)
+{
+	u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+	/* Stop condition must begin with data low and clock high */
+	ixgbe_set_i2c_data(hw, &i2cctl, 0);
+	ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+	/* Setup time for stop condition (4us) */
+	udelay(IXGBE_I2C_T_SU_STO);
+
+	ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+	/* bus free time between stop and start (4.7us)*/
+	udelay(IXGBE_I2C_T_BUF);
+}
+
+/**
+ *  ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
+ *  @hw: pointer to hardware structure
+ *  @data: data byte to clock in
+ *
+ *  Clocks in one byte data via I2C data/clock
+ **/
+static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
+{
+	s32 i;
+	bool bit = false;
+
+	for (i = 7; i >= 0; i--) {
+		ixgbe_clock_in_i2c_bit(hw, &bit);
+		*data |= bit << i;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
+ *  @hw: pointer to hardware structure
+ *  @data: data byte clocked out
+ *
+ *  Clocks out one byte data via I2C data/clock
+ **/
+static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
+{
+	s32 status;
+	s32 i;
+	u32 i2cctl;
+	bool bit = false;
+
+	for (i = 7; i >= 0; i--) {
+		bit = (data >> i) & 0x1;
+		status = ixgbe_clock_out_i2c_bit(hw, bit);
+
+		if (status != 0)
+			break;
+	}
+
+	/* Release SDA line (set high) */
+	i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+	i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+	IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_i2c_ack - Polls for I2C ACK
+ *  @hw: pointer to hardware structure
+ *
+ *  Clocks in/out one bit via I2C data/clock
+ **/
+static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	u32 i = 0;
+	u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+	u32 timeout = 10;
+	bool ack = true;
+
+	ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+
+	/* Minimum high period of clock is 4us */
+	udelay(IXGBE_I2C_T_HIGH);
+
+	/* Poll for ACK.  Note that ACK in I2C spec is
+	 * transition from 1 to 0 */
+	for (i = 0; i < timeout; i++) {
+		i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+		ack = ixgbe_get_i2c_data(hw, &i2cctl);
+
+		udelay(1);
+		if (ack == 0)
+			break;
+	}
+
+	if (ack == 1) {
+		hw_dbg(hw, "I2C ack was not received.\n");
+		status = IXGBE_ERR_I2C;
+	}
+
+	ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	udelay(IXGBE_I2C_T_LOW);
+
+	return status;
+}
+
+/**
+ *  ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
+ *  @hw: pointer to hardware structure
+ *  @data: read data value
+ *
+ *  Clocks in one bit via I2C data/clock
+ **/
+static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
+{
+	u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+	ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+	/* Minimum high period of clock is 4us */
+	udelay(IXGBE_I2C_T_HIGH);
+
+	i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+	*data = ixgbe_get_i2c_data(hw, &i2cctl);
+
+	ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+	/* Minimum low period of clock is 4.7 us */
+	udelay(IXGBE_I2C_T_LOW);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
+ *  @hw: pointer to hardware structure
+ *  @data: data value to write
+ *
+ *  Clocks out one bit via I2C data/clock
+ **/
+static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
+{
+	s32 status;
+	u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+	status = ixgbe_set_i2c_data(hw, &i2cctl, data);
+	if (status == 0) {
+		ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+		/* Minimum high period of clock is 4us */
+		udelay(IXGBE_I2C_T_HIGH);
+
+		ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+		/* Minimum low period of clock is 4.7 us.
+		 * This also takes care of the data hold time.
+		 */
+		udelay(IXGBE_I2C_T_LOW);
+	} else {
+		hw_dbg(hw, "I2C data was not set to %X\n", data);
+		return IXGBE_ERR_I2C;
+	}
+
+	return 0;
+}
+/**
+ *  ixgbe_raise_i2c_clk - Raises the I2C SCL clock
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Raises the I2C clock line '0'->'1'
+ **/
+static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+	u32 i = 0;
+	u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT;
+	u32 i2cctl_r = 0;
+
+	for (i = 0; i < timeout; i++) {
+		*i2cctl |= IXGBE_I2C_CLK_OUT_BY_MAC(hw);
+		IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+		IXGBE_WRITE_FLUSH(hw);
+		/* SCL rise time (1000ns) */
+		udelay(IXGBE_I2C_T_RISE);
+
+		i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+		if (i2cctl_r & IXGBE_I2C_CLK_IN_BY_MAC(hw))
+			break;
+	}
+}
+
+/**
+ *  ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Lowers the I2C clock line '1'->'0'
+ **/
+static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+
+	*i2cctl &= ~IXGBE_I2C_CLK_OUT_BY_MAC(hw);
+
+	IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* SCL fall time (300ns) */
+	udelay(IXGBE_I2C_T_FALL);
+}
+
+/**
+ *  ixgbe_set_i2c_data - Sets the I2C data bit
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *  @data: I2C data value (0 or 1) to set
+ *
+ *  Sets the I2C data bit
+ **/
+static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
+{
+	if (data)
+		*i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+	else
+		*i2cctl &= ~IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+
+	IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
+	udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
+
+	/* Verify data was set correctly */
+	*i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+	if (data != ixgbe_get_i2c_data(hw, i2cctl)) {
+		hw_dbg(hw, "Error - I2C data was not set to %X.\n", data);
+		return IXGBE_ERR_I2C;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_i2c_data - Reads the I2C SDA data bit
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Returns the I2C data bit value
+ **/
+static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+	if (*i2cctl & IXGBE_I2C_DATA_IN_BY_MAC(hw))
+		return true;
+	return false;
+}
+
+/**
+ *  ixgbe_i2c_bus_clear - Clears the I2C bus
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the I2C bus by sending nine clock pulses.
+ *  Used when data line is stuck low.
+ **/
+static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
+{
+	u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+	u32 i;
+
+	ixgbe_i2c_start(hw);
+
+	ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+	for (i = 0; i < 9; i++) {
+		ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+		/* Min high period of clock is 4us */
+		udelay(IXGBE_I2C_T_HIGH);
+
+		ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+		/* Min low period of clock is 4.7us*/
+		udelay(IXGBE_I2C_T_LOW);
+	}
+
+	ixgbe_i2c_start(hw);
+
+	/* Put the i2c bus back to default state */
+	ixgbe_i2c_stop(hw);
+}
+
+/**
+ *  ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
+ *  @hw: pointer to hardware structure
+ *
+ *  Checks if the LASI temp alarm status was triggered due to overtemp
+ **/
+s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
+{
+	u16 phy_data = 0;
+
+	if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM)
+		return 0;
+
+	/* Check that the LASI temp alarm status was triggered */
+	hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG,
+			     MDIO_MMD_PMAPMD, &phy_data);
+
+	if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM))
+		return 0;
+
+	return IXGBE_ERR_OVERTEMP;
+}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
new file mode 100644
index 000000000..434643881
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -0,0 +1,168 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_PHY_H_
+#define _IXGBE_PHY_H_
+
+#include "ixgbe_type.h"
+#define IXGBE_I2C_EEPROM_DEV_ADDR    0xA0
+#define IXGBE_I2C_EEPROM_DEV_ADDR2   0xA2
+
+/* EEPROM byte offsets */
+#define IXGBE_SFF_IDENTIFIER		0x0
+#define IXGBE_SFF_IDENTIFIER_SFP	0x3
+#define IXGBE_SFF_VENDOR_OUI_BYTE0	0x25
+#define IXGBE_SFF_VENDOR_OUI_BYTE1	0x26
+#define IXGBE_SFF_VENDOR_OUI_BYTE2	0x27
+#define IXGBE_SFF_1GBE_COMP_CODES	0x6
+#define IXGBE_SFF_10GBE_COMP_CODES	0x3
+#define IXGBE_SFF_CABLE_TECHNOLOGY	0x8
+#define IXGBE_SFF_CABLE_SPEC_COMP	0x3C
+#define IXGBE_SFF_SFF_8472_SWAP		0x5C
+#define IXGBE_SFF_SFF_8472_COMP		0x5E
+#define IXGBE_SFF_SFF_8472_OSCB		0x6E
+#define IXGBE_SFF_SFF_8472_ESCB		0x76
+#define IXGBE_SFF_IDENTIFIER_QSFP_PLUS	0xD
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0	0xA5
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1	0xA6
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2	0xA7
+#define IXGBE_SFF_QSFP_CONNECTOR	0x82
+#define IXGBE_SFF_QSFP_10GBE_COMP	0x83
+#define IXGBE_SFF_QSFP_1GBE_COMP	0x86
+#define IXGBE_SFF_QSFP_CABLE_LENGTH	0x92
+#define IXGBE_SFF_QSFP_DEVICE_TECH	0x93
+
+/* Bitmasks */
+#define IXGBE_SFF_DA_PASSIVE_CABLE		0x4
+#define IXGBE_SFF_DA_ACTIVE_CABLE		0x8
+#define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING	0x4
+#define IXGBE_SFF_1GBASESX_CAPABLE		0x1
+#define IXGBE_SFF_1GBASELX_CAPABLE		0x2
+#define IXGBE_SFF_1GBASET_CAPABLE		0x8
+#define IXGBE_SFF_10GBASESR_CAPABLE		0x10
+#define IXGBE_SFF_10GBASELR_CAPABLE		0x20
+#define IXGBE_SFF_ADDRESSING_MODE		0x4
+#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE		0x1
+#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE		0x8
+#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE	0x23
+#define IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL	0x0
+#define IXGBE_I2C_EEPROM_READ_MASK		0x100
+#define IXGBE_I2C_EEPROM_STATUS_MASK		0x3
+#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION	0x0
+#define IXGBE_I2C_EEPROM_STATUS_PASS		0x1
+#define IXGBE_I2C_EEPROM_STATUS_FAIL		0x2
+#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS	0x3
+#define IXGBE_CS4227				0xBE    /* CS4227 address */
+#define IXGBE_CS4227_SPARE24_LSB		0x12B0  /* Reg to program EDC */
+#define IXGBE_CS4227_EDC_MODE_CX1		0x0002
+#define IXGBE_CS4227_EDC_MODE_SR		0x0004
+
+/* Flow control defines */
+#define IXGBE_TAF_SYM_PAUSE                  0x400
+#define IXGBE_TAF_ASM_PAUSE                  0x800
+
+/* Bit-shift macros */
+#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT    24
+#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT    16
+#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT    8
+
+/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
+#define IXGBE_SFF_VENDOR_OUI_TYCO     0x00407600
+#define IXGBE_SFF_VENDOR_OUI_FTL      0x00906500
+#define IXGBE_SFF_VENDOR_OUI_AVAGO    0x00176A00
+#define IXGBE_SFF_VENDOR_OUI_INTEL    0x001B2100
+
+/* I2C SDA and SCL timing parameters for standard mode */
+#define IXGBE_I2C_T_HD_STA  4
+#define IXGBE_I2C_T_LOW     5
+#define IXGBE_I2C_T_HIGH    4
+#define IXGBE_I2C_T_SU_STA  5
+#define IXGBE_I2C_T_HD_DATA 5
+#define IXGBE_I2C_T_SU_DATA 1
+#define IXGBE_I2C_T_RISE    1
+#define IXGBE_I2C_T_FALL    1
+#define IXGBE_I2C_T_SU_STO  4
+#define IXGBE_I2C_T_BUF     5
+
+#define IXGBE_TN_LASI_STATUS_REG        0x9005
+#define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008
+
+/* SFP+ SFF-8472 Compliance code */
+#define IXGBE_SFF_SFF_8472_UNSUP      0x00
+
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+			       u32 device_type, u16 *phy_data);
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+				u32 device_type, u16 phy_data);
+s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
+			   u32 device_type, u16 *phy_data);
+s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
+			    u32 device_type, u16 phy_data);
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+				       ixgbe_link_speed speed,
+				       bool autoneg_wait_to_complete);
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+					       ixgbe_link_speed *speed,
+					       bool *autoneg);
+bool ixgbe_check_reset_blocked(struct ixgbe_hw *hw);
+
+/* PHY specific */
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
+			     ixgbe_link_speed *speed,
+			     bool *link_up);
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw);
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+				       u16 *firmware_version);
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+					   u16 *firmware_version);
+
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
+s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+					u16 *list_offset,
+					u16 *data_offset);
+s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw);
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				u8 dev_addr, u8 *data);
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 data);
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				  u8 *eeprom_data);
+s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				   u8 *sff8472_data);
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+				   u8 eeprom_data);
+s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
+				    u16 reg, u16 *val);
+s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
+				     u16 reg, u16 val);
+#endif /* _IXGBE_PHY_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
new file mode 100644
index 000000000..e5ba04025
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -0,0 +1,997 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+#include "ixgbe.h"
+#include <linux/ptp_classify.h>
+
+/*
+ * The 82599 and the X540 do not have true 64bit nanosecond scale
+ * counter registers. Instead, SYSTIME is defined by a fixed point
+ * system which allows the user to define the scale counter increment
+ * value at every level change of the oscillator driving the SYSTIME
+ * value. For both devices the TIMINCA:IV field defines this
+ * increment. On the X540 device, 31 bits are provided. However on the
+ * 82599 only provides 24 bits. The time unit is determined by the
+ * clock frequency of the oscillator in combination with the TIMINCA
+ * register. When these devices link at 10Gb the oscillator has a
+ * period of 6.4ns. In order to convert the scale counter into
+ * nanoseconds the cyclecounter and timecounter structures are
+ * used. The SYSTIME registers need to be converted to ns values by use
+ * of only a right shift (division by power of 2). The following math
+ * determines the largest incvalue that will fit into the available
+ * bits in the TIMINCA register.
+ *
+ * PeriodWidth: Number of bits to store the clock period
+ * MaxWidth: The maximum width value of the TIMINCA register
+ * Period: The clock period for the oscillator
+ * round(): discard the fractional portion of the calculation
+ *
+ * Period * [ 2 ^ ( MaxWidth - PeriodWidth ) ]
+ *
+ * For the X540, MaxWidth is 31 bits, and the base period is 6.4 ns
+ * For the 82599, MaxWidth is 24 bits, and the base period is 6.4 ns
+ *
+ * The period also changes based on the link speed:
+ * At 10Gb link or no link, the period remains the same.
+ * At 1Gb link, the period is multiplied by 10. (64ns)
+ * At 100Mb link, the period is multiplied by 100. (640ns)
+ *
+ * The calculated value allows us to right shift the SYSTIME register
+ * value in order to quickly convert it into a nanosecond clock,
+ * while allowing for the maximum possible adjustment value.
+ *
+ * These diagrams are only for the 10Gb link period
+ *
+ *           SYSTIMEH            SYSTIMEL
+ *       +--------------+  +--------------+
+ * X540  |      32      |  | 1 | 3 |  28  |
+ *       *--------------+  +--------------+
+ *        \________ 36 bits ______/  fract
+ *
+ *       +--------------+  +--------------+
+ * 82599 |      32      |  | 8 | 3 |  21  |
+ *       *--------------+  +--------------+
+ *        \________ 43 bits ______/  fract
+ *
+ * The 36 bit X540 SYSTIME overflows every
+ *   2^36 * 10^-9 / 60 = 1.14 minutes or 69 seconds
+ *
+ * The 43 bit 82599 SYSTIME overflows every
+ *   2^43 * 10^-9 / 3600 = 2.4 hours
+ */
+#define IXGBE_INCVAL_10GB 0x66666666
+#define IXGBE_INCVAL_1GB  0x40000000
+#define IXGBE_INCVAL_100  0x50000000
+
+#define IXGBE_INCVAL_SHIFT_10GB  28
+#define IXGBE_INCVAL_SHIFT_1GB   24
+#define IXGBE_INCVAL_SHIFT_100   21
+
+#define IXGBE_INCVAL_SHIFT_82599 7
+#define IXGBE_INCPER_SHIFT_82599 24
+#define IXGBE_MAX_TIMEADJ_VALUE  0x7FFFFFFFFFFFFFFFULL
+
+#define IXGBE_OVERFLOW_PERIOD    (HZ * 30)
+#define IXGBE_PTP_TX_TIMEOUT     (HZ * 15)
+
+/* half of a one second clock period, for use with PPS signal. We have to use
+ * this instead of something pre-defined like IXGBE_PTP_PPS_HALF_SECOND, in
+ * order to force at least 64bits of precision for shifting
+ */
+#define IXGBE_PTP_PPS_HALF_SECOND 500000000ULL
+
+/**
+ * ixgbe_ptp_setup_sdp
+ * @hw: the hardware private structure
+ *
+ * this function enables or disables the clock out feature on SDP0 for
+ * the X540 device. It will create a 1second periodic output that can
+ * be used as the PPS (via an interrupt).
+ *
+ * It calculates when the systime will be on an exact second, and then
+ * aligns the start of the PPS signal to that value. The shift is
+ * necessary because it can change based on the link speed.
+ */
+static void ixgbe_ptp_setup_sdp(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int shift = adapter->cc.shift;
+	u32 esdp, tsauxc, clktiml, clktimh, trgttiml, trgttimh, rem;
+	u64 ns = 0, clock_edge = 0;
+
+	if ((adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED) &&
+	    (hw->mac.type == ixgbe_mac_X540)) {
+
+		/* disable the pin first */
+		IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0x0);
+		IXGBE_WRITE_FLUSH(hw);
+
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+		/*
+		 * enable the SDP0 pin as output, and connected to the
+		 * native function for Timesync (ClockOut)
+		 */
+		esdp |= (IXGBE_ESDP_SDP0_DIR |
+			 IXGBE_ESDP_SDP0_NATIVE);
+
+		/*
+		 * enable the Clock Out feature on SDP0, and allow
+		 * interrupts to occur when the pin changes
+		 */
+		tsauxc = (IXGBE_TSAUXC_EN_CLK |
+			  IXGBE_TSAUXC_SYNCLK |
+			  IXGBE_TSAUXC_SDP0_INT);
+
+		/* clock period (or pulse length) */
+		clktiml = (u32)(IXGBE_PTP_PPS_HALF_SECOND << shift);
+		clktimh = (u32)((IXGBE_PTP_PPS_HALF_SECOND << shift) >> 32);
+
+		/*
+		 * Account for the cyclecounter wrap-around value by
+		 * using the converted ns value of the current time to
+		 * check for when the next aligned second would occur.
+		 */
+		clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML);
+		clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32;
+		ns = timecounter_cyc2time(&adapter->tc, clock_edge);
+
+		div_u64_rem(ns, IXGBE_PTP_PPS_HALF_SECOND, &rem);
+		clock_edge += ((IXGBE_PTP_PPS_HALF_SECOND - (u64)rem) << shift);
+
+		/* specify the initial clock start time */
+		trgttiml = (u32)clock_edge;
+		trgttimh = (u32)(clock_edge >> 32);
+
+		IXGBE_WRITE_REG(hw, IXGBE_CLKTIML, clktiml);
+		IXGBE_WRITE_REG(hw, IXGBE_CLKTIMH, clktimh);
+		IXGBE_WRITE_REG(hw, IXGBE_TRGTTIML0, trgttiml);
+		IXGBE_WRITE_REG(hw, IXGBE_TRGTTIMH0, trgttimh);
+
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, tsauxc);
+	} else {
+		IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0x0);
+	}
+
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_ptp_read - read raw cycle counter (to be used by time counter)
+ * @cc: the cyclecounter structure
+ *
+ * this function reads the cyclecounter registers and is called by the
+ * cyclecounter structure used to construct a ns counter from the
+ * arbitrary fixed point registers
+ */
+static cycle_t ixgbe_ptp_read(const struct cyclecounter *cc)
+{
+	struct ixgbe_adapter *adapter =
+		container_of(cc, struct ixgbe_adapter, cc);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u64 stamp = 0;
+
+	stamp |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML);
+	stamp |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32;
+
+	return stamp;
+}
+
+/**
+ * ixgbe_ptp_adjfreq
+ * @ptp: the ptp clock structure
+ * @ppb: parts per billion adjustment from base
+ *
+ * adjust the frequency of the ptp cycle counter by the
+ * indicated ppb from the base frequency.
+ */
+static int ixgbe_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
+{
+	struct ixgbe_adapter *adapter =
+		container_of(ptp, struct ixgbe_adapter, ptp_caps);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u64 freq;
+	u32 diff, incval;
+	int neg_adj = 0;
+
+	if (ppb < 0) {
+		neg_adj = 1;
+		ppb = -ppb;
+	}
+
+	smp_mb();
+	incval = ACCESS_ONCE(adapter->base_incval);
+
+	freq = incval;
+	freq *= ppb;
+	diff = div_u64(freq, 1000000000ULL);
+
+	incval = neg_adj ? (incval - diff) : (incval + diff);
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_X540:
+		IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, incval);
+		break;
+	case ixgbe_mac_82599EB:
+		IXGBE_WRITE_REG(hw, IXGBE_TIMINCA,
+				(1 << IXGBE_INCPER_SHIFT_82599) |
+				incval);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * ixgbe_ptp_adjtime
+ * @ptp: the ptp clock structure
+ * @delta: offset to adjust the cycle counter by
+ *
+ * adjust the timer by resetting the timecounter structure.
+ */
+static int ixgbe_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+	struct ixgbe_adapter *adapter =
+		container_of(ptp, struct ixgbe_adapter, ptp_caps);
+	unsigned long flags;
+
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+	timecounter_adjtime(&adapter->tc, delta);
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	ixgbe_ptp_setup_sdp(adapter);
+
+	return 0;
+}
+
+/**
+ * ixgbe_ptp_gettime
+ * @ptp: the ptp clock structure
+ * @ts: timespec structure to hold the current time value
+ *
+ * read the timecounter and return the correct value on ns,
+ * after converting it into a struct timespec.
+ */
+static int ixgbe_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
+{
+	struct ixgbe_adapter *adapter =
+		container_of(ptp, struct ixgbe_adapter, ptp_caps);
+	u64 ns;
+	unsigned long flags;
+
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+	ns = timecounter_read(&adapter->tc);
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	*ts = ns_to_timespec64(ns);
+
+	return 0;
+}
+
+/**
+ * ixgbe_ptp_settime
+ * @ptp: the ptp clock structure
+ * @ts: the timespec containing the new time for the cycle counter
+ *
+ * reset the timecounter to use a new base value instead of the kernel
+ * wall timer value.
+ */
+static int ixgbe_ptp_settime(struct ptp_clock_info *ptp,
+			     const struct timespec64 *ts)
+{
+	struct ixgbe_adapter *adapter =
+		container_of(ptp, struct ixgbe_adapter, ptp_caps);
+	u64 ns;
+	unsigned long flags;
+
+	ns = timespec64_to_ns(ts);
+
+	/* reset the timecounter */
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+	timecounter_init(&adapter->tc, &adapter->cc, ns);
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	ixgbe_ptp_setup_sdp(adapter);
+	return 0;
+}
+
+/**
+ * ixgbe_ptp_feature_enable
+ * @ptp: the ptp clock structure
+ * @rq: the requested feature to change
+ * @on: whether to enable or disable the feature
+ *
+ * enable (or disable) ancillary features of the phc subsystem.
+ * our driver only supports the PPS feature on the X540
+ */
+static int ixgbe_ptp_feature_enable(struct ptp_clock_info *ptp,
+				    struct ptp_clock_request *rq, int on)
+{
+	struct ixgbe_adapter *adapter =
+		container_of(ptp, struct ixgbe_adapter, ptp_caps);
+
+	/**
+	 * When PPS is enabled, unmask the interrupt for the ClockOut
+	 * feature, so that the interrupt handler can send the PPS
+	 * event when the clock SDP triggers. Clear mask when PPS is
+	 * disabled
+	 */
+	if (rq->type == PTP_CLK_REQ_PPS) {
+		switch (adapter->hw.mac.type) {
+		case ixgbe_mac_X540:
+			if (on)
+				adapter->flags2 |= IXGBE_FLAG2_PTP_PPS_ENABLED;
+			else
+				adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED;
+
+			ixgbe_ptp_setup_sdp(adapter);
+			return 0;
+		default:
+			break;
+		}
+	}
+
+	return -ENOTSUPP;
+}
+
+/**
+ * ixgbe_ptp_check_pps_event
+ * @adapter: the private adapter structure
+ * @eicr: the interrupt cause register value
+ *
+ * This function is called by the interrupt routine when checking for
+ * interrupts. It will check and handle a pps event.
+ */
+void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ptp_clock_event event;
+
+	event.type = PTP_CLOCK_PPS;
+
+	/* this check is necessary in case the interrupt was enabled via some
+	 * alternative means (ex. debug_fs). Better to check here than
+	 * everywhere that calls this function.
+	 */
+	if (!adapter->ptp_clock)
+		return;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_X540:
+		ptp_clock_event(adapter->ptp_clock, &event);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * ixgbe_ptp_overflow_check - watchdog task to detect SYSTIME overflow
+ * @adapter: private adapter struct
+ *
+ * this watchdog task periodically reads the timecounter
+ * in order to prevent missing when the system time registers wrap
+ * around. This needs to be run approximately twice a minute.
+ */
+void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter)
+{
+	bool timeout = time_is_before_jiffies(adapter->last_overflow_check +
+					     IXGBE_OVERFLOW_PERIOD);
+	struct timespec64 ts;
+
+	if (timeout) {
+		ixgbe_ptp_gettime(&adapter->ptp_caps, &ts);
+		adapter->last_overflow_check = jiffies;
+	}
+}
+
+/**
+ * ixgbe_ptp_rx_hang - detect error case when Rx timestamp registers latched
+ * @adapter: private network adapter structure
+ *
+ * this watchdog task is scheduled to detect error case where hardware has
+ * dropped an Rx packet that was timestamped when the ring is full. The
+ * particular error is rare but leaves the device in a state unable to timestamp
+ * any future packets.
+ */
+void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL);
+	unsigned long rx_event;
+
+	/* if we don't have a valid timestamp in the registers, just update the
+	 * timeout counter and exit
+	 */
+	if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) {
+		adapter->last_rx_ptp_check = jiffies;
+		return;
+	}
+
+	/* determine the most recent watchdog or rx_timestamp event */
+	rx_event = adapter->last_rx_ptp_check;
+	if (time_after(adapter->last_rx_timestamp, rx_event))
+		rx_event = adapter->last_rx_timestamp;
+
+	/* only need to read the high RXSTMP register to clear the lock */
+	if (time_is_before_jiffies(rx_event + 5*HZ)) {
+		IXGBE_READ_REG(hw, IXGBE_RXSTMPH);
+		adapter->last_rx_ptp_check = jiffies;
+
+		e_warn(drv, "clearing RX Timestamp hang\n");
+	}
+}
+
+/**
+ * ixgbe_ptp_tx_hwtstamp - utility function which checks for TX time stamp
+ * @adapter: the private adapter struct
+ *
+ * if the timestamp is valid, we convert it into the timecounter ns
+ * value, then store that result into the shhwtstamps structure which
+ * is passed up the network stack
+ */
+static void ixgbe_ptp_tx_hwtstamp(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct skb_shared_hwtstamps shhwtstamps;
+	u64 regval = 0, ns;
+	unsigned long flags;
+
+	regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPL);
+	regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPH) << 32;
+
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+	ns = timecounter_cyc2time(&adapter->tc, regval);
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	memset(&shhwtstamps, 0, sizeof(shhwtstamps));
+	shhwtstamps.hwtstamp = ns_to_ktime(ns);
+	skb_tstamp_tx(adapter->ptp_tx_skb, &shhwtstamps);
+
+	dev_kfree_skb_any(adapter->ptp_tx_skb);
+	adapter->ptp_tx_skb = NULL;
+	clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
+}
+
+/**
+ * ixgbe_ptp_tx_hwtstamp_work
+ * @work: pointer to the work struct
+ *
+ * This work item polls TSYNCTXCTL valid bit to determine when a Tx hardware
+ * timestamp has been taken for the current skb. It is necessary, because the
+ * descriptor's "done" bit does not correlate with the timestamp event.
+ */
+static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work)
+{
+	struct ixgbe_adapter *adapter = container_of(work, struct ixgbe_adapter,
+						     ptp_tx_work);
+	struct ixgbe_hw *hw = &adapter->hw;
+	bool timeout = time_is_before_jiffies(adapter->ptp_tx_start +
+					      IXGBE_PTP_TX_TIMEOUT);
+	u32 tsynctxctl;
+
+	if (timeout) {
+		dev_kfree_skb_any(adapter->ptp_tx_skb);
+		adapter->ptp_tx_skb = NULL;
+		clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
+		e_warn(drv, "clearing Tx Timestamp hang\n");
+		return;
+	}
+
+	tsynctxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL);
+	if (tsynctxctl & IXGBE_TSYNCTXCTL_VALID)
+		ixgbe_ptp_tx_hwtstamp(adapter);
+	else
+		/* reschedule to keep checking if it's not available yet */
+		schedule_work(&adapter->ptp_tx_work);
+}
+
+/**
+ * ixgbe_ptp_rx_hwtstamp - utility function which checks for RX time stamp
+ * @adapter: pointer to adapter struct
+ * @skb: particular skb to send timestamp with
+ *
+ * if the timestamp is valid, we convert it into the timecounter ns
+ * value, then store that result into the shhwtstamps structure which
+ * is passed up the network stack
+ */
+void ixgbe_ptp_rx_hwtstamp(struct ixgbe_adapter *adapter, struct sk_buff *skb)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct skb_shared_hwtstamps *shhwtstamps;
+	u64 regval = 0, ns;
+	u32 tsyncrxctl;
+	unsigned long flags;
+
+	tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL);
+	if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID))
+		return;
+
+	regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPL);
+	regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPH) << 32;
+
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+	ns = timecounter_cyc2time(&adapter->tc, regval);
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	shhwtstamps = skb_hwtstamps(skb);
+	shhwtstamps->hwtstamp = ns_to_ktime(ns);
+
+	/* Update the last_rx_timestamp timer in order to enable watchdog check
+	 * for error case of latched timestamp on a dropped packet.
+	 */
+	adapter->last_rx_timestamp = jiffies;
+}
+
+int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr)
+{
+	struct hwtstamp_config *config = &adapter->tstamp_config;
+
+	return copy_to_user(ifr->ifr_data, config,
+			    sizeof(*config)) ? -EFAULT : 0;
+}
+
+/**
+ * ixgbe_ptp_set_timestamp_mode - setup the hardware for the requested mode
+ * @adapter: the private ixgbe adapter structure
+ * @config: the hwtstamp configuration requested
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't cause any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware
+ * filters. Not all combinations are supported, in particular event
+ * type has to be specified. Matching the kind of event packet is
+ * not supported, with the exception of "all V2 events regardless of
+ * level 2 or 4".
+ *
+ * Since hardware always timestamps Path delay packets when timestamping V2
+ * packets, regardless of the type specified in the register, only use V2
+ * Event mode. This more accurately tells the user what the hardware is going
+ * to do anyways.
+ *
+ * Note: this may modify the hwtstamp configuration towards a more general
+ * mode, if required to support the specifically requested mode.
+ */
+static int ixgbe_ptp_set_timestamp_mode(struct ixgbe_adapter *adapter,
+				 struct hwtstamp_config *config)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 tsync_tx_ctl = IXGBE_TSYNCTXCTL_ENABLED;
+	u32 tsync_rx_ctl = IXGBE_TSYNCRXCTL_ENABLED;
+	u32 tsync_rx_mtrl = PTP_EV_PORT << 16;
+	bool is_l2 = false;
+	u32 regval;
+
+	/* reserved for future extensions */
+	if (config->flags)
+		return -EINVAL;
+
+	switch (config->tx_type) {
+	case HWTSTAMP_TX_OFF:
+		tsync_tx_ctl = 0;
+	case HWTSTAMP_TX_ON:
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	switch (config->rx_filter) {
+	case HWTSTAMP_FILTER_NONE:
+		tsync_rx_ctl = 0;
+		tsync_rx_mtrl = 0;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+		tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1;
+		tsync_rx_mtrl |= IXGBE_RXMTRL_V1_SYNC_MSG;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+		tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1;
+		tsync_rx_mtrl |= IXGBE_RXMTRL_V1_DELAY_REQ_MSG;
+		break;
+	case HWTSTAMP_FILTER_PTP_V2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+	case HWTSTAMP_FILTER_PTP_V2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+		tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_EVENT_V2;
+		is_l2 = true;
+		config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+		break;
+	case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+	case HWTSTAMP_FILTER_ALL:
+	default:
+		/*
+		 * register RXMTRL must be set in order to do V1 packets,
+		 * therefore it is not possible to time stamp both V1 Sync and
+		 * Delay_Req messages and hardware does not support
+		 * timestamping all packets => return error
+		 */
+		config->rx_filter = HWTSTAMP_FILTER_NONE;
+		return -ERANGE;
+	}
+
+	if (hw->mac.type == ixgbe_mac_82598EB) {
+		if (tsync_rx_ctl | tsync_tx_ctl)
+			return -ERANGE;
+		return 0;
+	}
+
+	/* define ethertype filter for timestamping L2 packets */
+	if (is_l2)
+		IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_1588),
+				(IXGBE_ETQF_FILTER_EN | /* enable filter */
+				 IXGBE_ETQF_1588 | /* enable timestamping */
+				 ETH_P_1588));     /* 1588 eth protocol type */
+	else
+		IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_1588), 0);
+
+	/* enable/disable TX */
+	regval = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL);
+	regval &= ~IXGBE_TSYNCTXCTL_ENABLED;
+	regval |= tsync_tx_ctl;
+	IXGBE_WRITE_REG(hw, IXGBE_TSYNCTXCTL, regval);
+
+	/* enable/disable RX */
+	regval = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL);
+	regval &= ~(IXGBE_TSYNCRXCTL_ENABLED | IXGBE_TSYNCRXCTL_TYPE_MASK);
+	regval |= tsync_rx_ctl;
+	IXGBE_WRITE_REG(hw, IXGBE_TSYNCRXCTL, regval);
+
+	/* define which PTP packets are time stamped */
+	IXGBE_WRITE_REG(hw, IXGBE_RXMTRL, tsync_rx_mtrl);
+
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* clear TX/RX time stamp registers, just to be sure */
+	regval = IXGBE_READ_REG(hw, IXGBE_TXSTMPH);
+	regval = IXGBE_READ_REG(hw, IXGBE_RXSTMPH);
+
+	return 0;
+}
+
+/**
+ * ixgbe_ptp_set_ts_config - user entry point for timestamp mode
+ * @adapter: pointer to adapter struct
+ * @ifreq: ioctl data
+ *
+ * Set hardware to requested mode. If unsupported, return an error with no
+ * changes. Otherwise, store the mode for future reference.
+ */
+int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr)
+{
+	struct hwtstamp_config config;
+	int err;
+
+	if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+		return -EFAULT;
+
+	err = ixgbe_ptp_set_timestamp_mode(adapter, &config);
+	if (err)
+		return err;
+
+	/* save these settings for future reference */
+	memcpy(&adapter->tstamp_config, &config,
+	       sizeof(adapter->tstamp_config));
+
+	return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+		-EFAULT : 0;
+}
+
+/**
+ * ixgbe_ptp_start_cyclecounter - create the cycle counter from hw
+ * @adapter: pointer to the adapter structure
+ *
+ * This function should be called to set the proper values for the TIMINCA
+ * register and tell the cyclecounter structure what the tick rate of SYSTIME
+ * is. It does not directly modify SYSTIME registers or the timecounter
+ * structure. It should be called whenever a new TIMINCA value is necessary,
+ * such as during initialization or when the link speed changes.
+ */
+void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 incval = 0;
+	u32 shift = 0;
+	unsigned long flags;
+
+	/**
+	 * Scale the NIC cycle counter by a large factor so that
+	 * relatively small corrections to the frequency can be added
+	 * or subtracted. The drawbacks of a large factor include
+	 * (a) the clock register overflows more quickly, (b) the cycle
+	 * counter structure must be able to convert the systime value
+	 * to nanoseconds using only a multiplier and a right-shift,
+	 * and (c) the value must fit within the timinca register space
+	 * => math based on internal DMA clock rate and available bits
+	 *
+	 * Note that when there is no link, internal DMA clock is same as when
+	 * link speed is 10Gb. Set the registers correctly even when link is
+	 * down to preserve the clock setting
+	 */
+	switch (adapter->link_speed) {
+	case IXGBE_LINK_SPEED_100_FULL:
+		incval = IXGBE_INCVAL_100;
+		shift = IXGBE_INCVAL_SHIFT_100;
+		break;
+	case IXGBE_LINK_SPEED_1GB_FULL:
+		incval = IXGBE_INCVAL_1GB;
+		shift = IXGBE_INCVAL_SHIFT_1GB;
+		break;
+	case IXGBE_LINK_SPEED_10GB_FULL:
+	default:
+		incval = IXGBE_INCVAL_10GB;
+		shift = IXGBE_INCVAL_SHIFT_10GB;
+		break;
+	}
+
+	/**
+	 * Modify the calculated values to fit within the correct
+	 * number of bits specified by the hardware. The 82599 doesn't
+	 * have the same space as the X540, so bitshift the calculated
+	 * values to fit.
+	 */
+	switch (hw->mac.type) {
+	case ixgbe_mac_X540:
+		IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, incval);
+		break;
+	case ixgbe_mac_82599EB:
+		incval >>= IXGBE_INCVAL_SHIFT_82599;
+		shift -= IXGBE_INCVAL_SHIFT_82599;
+		IXGBE_WRITE_REG(hw, IXGBE_TIMINCA,
+				(1 << IXGBE_INCPER_SHIFT_82599) |
+				incval);
+		break;
+	default:
+		/* other devices aren't supported */
+		return;
+	}
+
+	/* update the base incval used to calculate frequency adjustment */
+	ACCESS_ONCE(adapter->base_incval) = incval;
+	smp_mb();
+
+	/* need lock to prevent incorrect read while modifying cyclecounter */
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+
+	memset(&adapter->cc, 0, sizeof(adapter->cc));
+	adapter->cc.read = ixgbe_ptp_read;
+	adapter->cc.mask = CYCLECOUNTER_MASK(64);
+	adapter->cc.shift = shift;
+	adapter->cc.mult = 1;
+
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+}
+
+/**
+ * ixgbe_ptp_reset
+ * @adapter: the ixgbe private board structure
+ *
+ * When the MAC resets, all the hardware bits for timesync are reset. This
+ * function is used to re-enable the device for PTP based on current settings.
+ * We do lose the current clock time, so just reset the cyclecounter to the
+ * system real clock time.
+ *
+ * This function will maintain hwtstamp_config settings, and resets the SDP
+ * output if it was enabled.
+ */
+void ixgbe_ptp_reset(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	unsigned long flags;
+
+	/* set SYSTIME registers to 0 just in case */
+	IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0x00000000);
+	IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0x00000000);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* reset the hardware timestamping mode */
+	ixgbe_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
+
+	ixgbe_ptp_start_cyclecounter(adapter);
+
+	spin_lock_irqsave(&adapter->tmreg_lock, flags);
+
+	/* reset the ns time counter */
+	timecounter_init(&adapter->tc, &adapter->cc,
+			 ktime_to_ns(ktime_get_real()));
+
+	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	/*
+	 * Now that the shift has been calculated and the systime
+	 * registers reset, (re-)enable the Clock out feature
+	 */
+	ixgbe_ptp_setup_sdp(adapter);
+}
+
+/**
+ * ixgbe_ptp_create_clock
+ * @adapter: the ixgbe private adapter structure
+ *
+ * This function performs setup of the user entry point function table and
+ * initializes the PTP clock device, which is used to access the clock-like
+ * features of the PTP core. It will be called by ixgbe_ptp_init, only if
+ * there isn't already a clock device (such as after a suspend/resume cycle,
+ * where the clock device wasn't destroyed).
+ */
+static int ixgbe_ptp_create_clock(struct ixgbe_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	long err;
+
+	/* do nothing if we already have a clock device */
+	if (!IS_ERR_OR_NULL(adapter->ptp_clock))
+		return 0;
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_X540:
+		snprintf(adapter->ptp_caps.name,
+			 sizeof(adapter->ptp_caps.name),
+			 "%s", netdev->name);
+		adapter->ptp_caps.owner = THIS_MODULE;
+		adapter->ptp_caps.max_adj = 250000000;
+		adapter->ptp_caps.n_alarm = 0;
+		adapter->ptp_caps.n_ext_ts = 0;
+		adapter->ptp_caps.n_per_out = 0;
+		adapter->ptp_caps.pps = 1;
+		adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq;
+		adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime;
+		adapter->ptp_caps.gettime64 = ixgbe_ptp_gettime;
+		adapter->ptp_caps.settime64 = ixgbe_ptp_settime;
+		adapter->ptp_caps.enable = ixgbe_ptp_feature_enable;
+		break;
+	case ixgbe_mac_82599EB:
+		snprintf(adapter->ptp_caps.name,
+			 sizeof(adapter->ptp_caps.name),
+			 "%s", netdev->name);
+		adapter->ptp_caps.owner = THIS_MODULE;
+		adapter->ptp_caps.max_adj = 250000000;
+		adapter->ptp_caps.n_alarm = 0;
+		adapter->ptp_caps.n_ext_ts = 0;
+		adapter->ptp_caps.n_per_out = 0;
+		adapter->ptp_caps.pps = 0;
+		adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq;
+		adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime;
+		adapter->ptp_caps.gettime64 = ixgbe_ptp_gettime;
+		adapter->ptp_caps.settime64 = ixgbe_ptp_settime;
+		adapter->ptp_caps.enable = ixgbe_ptp_feature_enable;
+		break;
+	default:
+		adapter->ptp_clock = NULL;
+		return -EOPNOTSUPP;
+	}
+
+	adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps,
+						&adapter->pdev->dev);
+	if (IS_ERR(adapter->ptp_clock)) {
+		err = PTR_ERR(adapter->ptp_clock);
+		adapter->ptp_clock = NULL;
+		e_dev_err("ptp_clock_register failed\n");
+		return err;
+	} else
+		e_dev_info("registered PHC device on %s\n", netdev->name);
+
+	/* set default timestamp mode to disabled here. We do this in
+	 * create_clock instead of init, because we don't want to override the
+	 * previous settings during a resume cycle.
+	 */
+	adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE;
+	adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF;
+
+	return 0;
+}
+
+/**
+ * ixgbe_ptp_init
+ * @adapter: the ixgbe private adapter structure
+ *
+ * This function performs the required steps for enabling PTP
+ * support. If PTP support has already been loaded it simply calls the
+ * cyclecounter init routine and exits.
+ */
+void ixgbe_ptp_init(struct ixgbe_adapter *adapter)
+{
+	/* initialize the spin lock first since we can't control when a user
+	 * will call the entry functions once we have initialized the clock
+	 * device
+	 */
+	spin_lock_init(&adapter->tmreg_lock);
+
+	/* obtain a PTP device, or re-use an existing device */
+	if (ixgbe_ptp_create_clock(adapter))
+		return;
+
+	/* we have a clock so we can initialize work now */
+	INIT_WORK(&adapter->ptp_tx_work, ixgbe_ptp_tx_hwtstamp_work);
+
+	/* reset the PTP related hardware bits */
+	ixgbe_ptp_reset(adapter);
+
+	/* enter the IXGBE_PTP_RUNNING state */
+	set_bit(__IXGBE_PTP_RUNNING, &adapter->state);
+
+	return;
+}
+
+/**
+ * ixgbe_ptp_suspend - stop PTP work items
+ * @ adapter: pointer to adapter struct
+ *
+ * this function suspends PTP activity, and prevents more PTP work from being
+ * generated, but does not destroy the PTP clock device.
+ */
+void ixgbe_ptp_suspend(struct ixgbe_adapter *adapter)
+{
+	/* Leave the IXGBE_PTP_RUNNING state. */
+	if (!test_and_clear_bit(__IXGBE_PTP_RUNNING, &adapter->state))
+		return;
+
+	/* since this might be called in suspend, we don't clear the state,
+	 * but simply reset the auxiliary PPS signal control register
+	 */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TSAUXC, 0x0);
+
+	/* ensure that we cancel any pending PTP Tx work item in progress */
+	cancel_work_sync(&adapter->ptp_tx_work);
+	if (adapter->ptp_tx_skb) {
+		dev_kfree_skb_any(adapter->ptp_tx_skb);
+		adapter->ptp_tx_skb = NULL;
+		clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
+	}
+}
+
+/**
+ * ixgbe_ptp_stop - close the PTP device
+ * @adapter: pointer to adapter struct
+ *
+ * completely destroy the PTP device, should only be called when the device is
+ * being fully closed.
+ */
+void ixgbe_ptp_stop(struct ixgbe_adapter *adapter)
+{
+	/* first, suspend PTP activity */
+	ixgbe_ptp_suspend(adapter);
+
+	/* disable the PTP clock device */
+	if (adapter->ptp_clock) {
+		ptp_clock_unregister(adapter->ptp_clock);
+		adapter->ptp_clock = NULL;
+		e_dev_info("removed PHC on %s\n",
+			   adapter->netdev->name);
+	}
+}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
new file mode 100644
index 000000000..1d17b5872
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -0,0 +1,1434 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/ipv6.h>
+#include <linux/if_bridge.h>
+#ifdef NETIF_F_HW_VLAN_CTAG_TX
+#include <linux/if_vlan.h>
+#endif
+
+#include "ixgbe.h"
+#include "ixgbe_type.h"
+#include "ixgbe_sriov.h"
+
+#ifdef CONFIG_PCI_IOV
+static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int num_vf_macvlans, i;
+	struct vf_macvlans *mv_list;
+
+	adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
+	e_info(probe, "SR-IOV enabled with %d VFs\n", adapter->num_vfs);
+
+	/* Enable VMDq flag so device will be set in VM mode */
+	adapter->flags |= IXGBE_FLAG_VMDQ_ENABLED;
+	if (!adapter->ring_feature[RING_F_VMDQ].limit)
+		adapter->ring_feature[RING_F_VMDQ].limit = 1;
+	adapter->ring_feature[RING_F_VMDQ].offset = adapter->num_vfs;
+
+	num_vf_macvlans = hw->mac.num_rar_entries -
+	(IXGBE_MAX_PF_MACVLANS + 1 + adapter->num_vfs);
+
+	adapter->mv_list = mv_list = kcalloc(num_vf_macvlans,
+					     sizeof(struct vf_macvlans),
+					     GFP_KERNEL);
+	if (mv_list) {
+		/* Initialize list of VF macvlans */
+		INIT_LIST_HEAD(&adapter->vf_mvs.l);
+		for (i = 0; i < num_vf_macvlans; i++) {
+			mv_list->vf = -1;
+			mv_list->free = true;
+			list_add(&mv_list->l, &adapter->vf_mvs.l);
+			mv_list++;
+		}
+	}
+
+	/* Initialize default switching mode VEB */
+	IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
+	adapter->bridge_mode = BRIDGE_MODE_VEB;
+
+	/* If call to enable VFs succeeded then allocate memory
+	 * for per VF control structures.
+	 */
+	adapter->vfinfo =
+		kcalloc(adapter->num_vfs,
+			sizeof(struct vf_data_storage), GFP_KERNEL);
+	if (adapter->vfinfo) {
+		/* limit trafffic classes based on VFs enabled */
+		if ((adapter->hw.mac.type == ixgbe_mac_82599EB) &&
+		    (adapter->num_vfs < 16)) {
+			adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS;
+			adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS;
+		} else if (adapter->num_vfs < 32) {
+			adapter->dcb_cfg.num_tcs.pg_tcs = 4;
+			adapter->dcb_cfg.num_tcs.pfc_tcs = 4;
+		} else {
+			adapter->dcb_cfg.num_tcs.pg_tcs = 1;
+			adapter->dcb_cfg.num_tcs.pfc_tcs = 1;
+		}
+
+		/* Disable RSC when in SR-IOV mode */
+		adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE |
+				     IXGBE_FLAG2_RSC_ENABLED);
+
+		for (i = 0; i < adapter->num_vfs; i++) {
+			/* enable spoof checking for all VFs */
+			adapter->vfinfo[i].spoofchk_enabled = true;
+
+			/* We support VF RSS querying only for 82599 and x540
+			 * devices at the moment. These devices share RSS
+			 * indirection table and RSS hash key with PF therefore
+			 * we want to disable the querying by default.
+			 */
+			adapter->vfinfo[i].rss_query_enabled = 0;
+		}
+
+		return 0;
+	}
+
+	return -ENOMEM;
+}
+
+/* Note this function is called when the user wants to enable SR-IOV
+ * VFs using the now deprecated module parameter
+ */
+void ixgbe_enable_sriov(struct ixgbe_adapter *adapter)
+{
+	int pre_existing_vfs = 0;
+
+	pre_existing_vfs = pci_num_vf(adapter->pdev);
+	if (!pre_existing_vfs && !adapter->num_vfs)
+		return;
+
+	/* If there are pre-existing VFs then we have to force
+	 * use of that many - over ride any module parameter value.
+	 * This may result from the user unloading the PF driver
+	 * while VFs were assigned to guest VMs or because the VFs
+	 * have been created via the new PCI SR-IOV sysfs interface.
+	 */
+	if (pre_existing_vfs) {
+		adapter->num_vfs = pre_existing_vfs;
+		dev_warn(&adapter->pdev->dev,
+			 "Virtual Functions already enabled for this device - Please reload all VF drivers to avoid spoofed packet errors\n");
+	} else {
+		int err;
+		/*
+		 * The 82599 supports up to 64 VFs per physical function
+		 * but this implementation limits allocation to 63 so that
+		 * basic networking resources are still available to the
+		 * physical function.  If the user requests greater than
+		 * 63 VFs then it is an error - reset to default of zero.
+		 */
+		adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, IXGBE_MAX_VFS_DRV_LIMIT);
+
+		err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
+		if (err) {
+			e_err(probe, "Failed to enable PCI sriov: %d\n", err);
+			adapter->num_vfs = 0;
+			return;
+		}
+	}
+
+	if (!__ixgbe_enable_sriov(adapter))
+		return;
+
+	/* If we have gotten to this point then there is no memory available
+	 * to manage the VF devices - print message and bail.
+	 */
+	e_err(probe, "Unable to allocate memory for VF Data Storage - "
+	      "SRIOV disabled\n");
+	ixgbe_disable_sriov(adapter);
+}
+
+#endif /* #ifdef CONFIG_PCI_IOV */
+int ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 gpie;
+	u32 vmdctl;
+	int rss;
+
+	/* set num VFs to 0 to prevent access to vfinfo */
+	adapter->num_vfs = 0;
+
+	/* free VF control structures */
+	kfree(adapter->vfinfo);
+	adapter->vfinfo = NULL;
+
+	/* free macvlan list */
+	kfree(adapter->mv_list);
+	adapter->mv_list = NULL;
+
+	/* if SR-IOV is already disabled then there is nothing to do */
+	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+		return 0;
+
+#ifdef CONFIG_PCI_IOV
+	/*
+	 * If our VFs are assigned we cannot shut down SR-IOV
+	 * without causing issues, so just leave the hardware
+	 * available but disabled
+	 */
+	if (pci_vfs_assigned(adapter->pdev)) {
+		e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n");
+		return -EPERM;
+	}
+	/* disable iov and allow time for transactions to clear */
+	pci_disable_sriov(adapter->pdev);
+#endif
+
+	/* turn off device IOV mode */
+	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, 0);
+	gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
+	gpie &= ~IXGBE_GPIE_VTMODE_MASK;
+	IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
+
+	/* set default pool back to 0 */
+	vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+	vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
+	IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Disable VMDq flag so device will be set in VM mode */
+	if (adapter->ring_feature[RING_F_VMDQ].limit == 1) {
+		adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED;
+		adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
+		rss = min_t(int, ixgbe_max_rss_indices(adapter),
+			    num_online_cpus());
+	} else {
+		rss = min_t(int, IXGBE_MAX_L2A_QUEUES, num_online_cpus());
+	}
+
+	adapter->ring_feature[RING_F_VMDQ].offset = 0;
+	adapter->ring_feature[RING_F_RSS].limit = rss;
+
+	/* take a breather then clean up driver data */
+	msleep(100);
+	return 0;
+}
+
+static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs)
+{
+#ifdef CONFIG_PCI_IOV
+	struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
+	int err = 0;
+	int i;
+	int pre_existing_vfs = pci_num_vf(dev);
+
+	if (pre_existing_vfs && pre_existing_vfs != num_vfs)
+		err = ixgbe_disable_sriov(adapter);
+	else if (pre_existing_vfs && pre_existing_vfs == num_vfs)
+		return num_vfs;
+
+	if (err)
+		return err;
+
+	/* While the SR-IOV capability structure reports total VFs to be 64,
+	 * we have to limit the actual number allocated based on two factors.
+	 * First, we reserve some transmit/receive resources for the PF.
+	 * Second, VMDQ also uses the same pools that SR-IOV does. We need to
+	 * account for this, so that we don't accidentally allocate more VFs
+	 * than we have available pools. The PCI bus driver already checks for
+	 * other values out of range.
+	 */
+	if ((num_vfs + adapter->num_rx_pools) > IXGBE_MAX_VF_FUNCTIONS)
+		return -EPERM;
+
+	adapter->num_vfs = num_vfs;
+
+	err = __ixgbe_enable_sriov(adapter);
+	if (err)
+		return  err;
+
+	for (i = 0; i < adapter->num_vfs; i++)
+		ixgbe_vf_configuration(dev, (i | 0x10000000));
+
+	err = pci_enable_sriov(dev, num_vfs);
+	if (err) {
+		e_dev_warn("Failed to enable PCI sriov: %d\n", err);
+		return err;
+	}
+	ixgbe_sriov_reinit(adapter);
+
+	return num_vfs;
+#else
+	return 0;
+#endif
+}
+
+static int ixgbe_pci_sriov_disable(struct pci_dev *dev)
+{
+	struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
+	int err;
+#ifdef CONFIG_PCI_IOV
+	u32 current_flags = adapter->flags;
+#endif
+
+	err = ixgbe_disable_sriov(adapter);
+
+	/* Only reinit if no error and state changed */
+#ifdef CONFIG_PCI_IOV
+	if (!err && current_flags != adapter->flags)
+		ixgbe_sriov_reinit(adapter);
+#endif
+
+	return err;
+}
+
+int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
+{
+	if (num_vfs == 0)
+		return ixgbe_pci_sriov_disable(dev);
+	else
+		return ixgbe_pci_sriov_enable(dev, num_vfs);
+}
+
+static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
+				   u32 *msgbuf, u32 vf)
+{
+	int entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
+		       >> IXGBE_VT_MSGINFO_SHIFT;
+	u16 *hash_list = (u16 *)&msgbuf[1];
+	struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i;
+	u32 vector_bit;
+	u32 vector_reg;
+	u32 mta_reg;
+	u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
+
+	/* only so many hash values supported */
+	entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES);
+
+	/*
+	 * salt away the number of multi cast addresses assigned
+	 * to this VF for later use to restore when the PF multi cast
+	 * list changes
+	 */
+	vfinfo->num_vf_mc_hashes = entries;
+
+	/*
+	 * VFs are limited to using the MTA hash table for their multicast
+	 * addresses
+	 */
+	for (i = 0; i < entries; i++) {
+		vfinfo->vf_mc_hashes[i] = hash_list[i];
+	}
+
+	for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) {
+		vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F;
+		vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F;
+		mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
+		mta_reg |= (1 << vector_bit);
+		IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
+	}
+	vmolr |= IXGBE_VMOLR_ROMPE;
+	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
+
+	return 0;
+}
+
+#ifdef CONFIG_PCI_IOV
+void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct vf_data_storage *vfinfo;
+	int i, j;
+	u32 vector_bit;
+	u32 vector_reg;
+	u32 mta_reg;
+
+	for (i = 0; i < adapter->num_vfs; i++) {
+		u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(i));
+		vfinfo = &adapter->vfinfo[i];
+		for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) {
+			hw->addr_ctrl.mta_in_use++;
+			vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F;
+			vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F;
+			mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
+			mta_reg |= (1 << vector_bit);
+			IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
+		}
+
+		if (vfinfo->num_vf_mc_hashes)
+			vmolr |= IXGBE_VMOLR_ROMPE;
+		else
+			vmolr &= ~IXGBE_VMOLR_ROMPE;
+		IXGBE_WRITE_REG(hw, IXGBE_VMOLR(i), vmolr);
+	}
+
+	/* Restore any VF macvlans */
+	ixgbe_full_sync_mac_table(adapter);
+}
+#endif
+
+static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
+			     u32 vf)
+{
+	/* VLAN 0 is a special case, don't allow it to be removed */
+	if (!vid && !add)
+		return 0;
+
+	return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add);
+}
+
+static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int max_frame = msgbuf[1];
+	u32 max_frs;
+
+	/*
+	 * For 82599EB we have to keep all PFs and VFs operating with
+	 * the same max_frame value in order to avoid sending an oversize
+	 * frame to a VF.  In order to guarantee this is handled correctly
+	 * for all cases we have several special exceptions to take into
+	 * account before we can enable the VF for receive
+	 */
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+		struct net_device *dev = adapter->netdev;
+		int pf_max_frame = dev->mtu + ETH_HLEN;
+		u32 reg_offset, vf_shift, vfre;
+		s32 err = 0;
+
+#ifdef CONFIG_FCOE
+		if (dev->features & NETIF_F_FCOE_MTU)
+			pf_max_frame = max_t(int, pf_max_frame,
+					     IXGBE_FCOE_JUMBO_FRAME_SIZE);
+
+#endif /* CONFIG_FCOE */
+		switch (adapter->vfinfo[vf].vf_api) {
+		case ixgbe_mbox_api_11:
+		case ixgbe_mbox_api_12:
+			/*
+			 * Version 1.1 supports jumbo frames on VFs if PF has
+			 * jumbo frames enabled which means legacy VFs are
+			 * disabled
+			 */
+			if (pf_max_frame > ETH_FRAME_LEN)
+				break;
+		default:
+			/*
+			 * If the PF or VF are running w/ jumbo frames enabled
+			 * we need to shut down the VF Rx path as we cannot
+			 * support jumbo frames on legacy VFs
+			 */
+			if ((pf_max_frame > ETH_FRAME_LEN) ||
+			    (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)))
+				err = -EINVAL;
+			break;
+		}
+
+		/* determine VF receive enable location */
+		vf_shift = vf % 32;
+		reg_offset = vf / 32;
+
+		/* enable or disable receive depending on error */
+		vfre = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
+		if (err)
+			vfre &= ~(1 << vf_shift);
+		else
+			vfre |= 1 << vf_shift;
+		IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), vfre);
+
+		if (err) {
+			e_err(drv, "VF max_frame %d out of range\n", max_frame);
+			return err;
+		}
+	}
+
+	/* MTU < 68 is an error and causes problems on some kernels */
+	if (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) {
+		e_err(drv, "VF max_frame %d out of range\n", max_frame);
+		return -EINVAL;
+	}
+
+	/* pull current max frame size from hardware */
+	max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
+	max_frs &= IXGBE_MHADD_MFS_MASK;
+	max_frs >>= IXGBE_MHADD_MFS_SHIFT;
+
+	if (max_frs < max_frame) {
+		max_frs = max_frame << IXGBE_MHADD_MFS_SHIFT;
+		IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs);
+	}
+
+	e_info(hw, "VF requests change max MTU to %d\n", max_frame);
+
+	return 0;
+}
+
+static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe)
+{
+	u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
+	vmolr |= IXGBE_VMOLR_BAM;
+	if (aupe)
+		vmolr |= IXGBE_VMOLR_AUPE;
+	else
+		vmolr &= ~IXGBE_VMOLR_AUPE;
+	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
+}
+
+static void ixgbe_clear_vmvir(struct ixgbe_adapter *adapter, u32 vf)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0);
+}
+static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
+	u8 num_tcs = netdev_get_num_tc(adapter->netdev);
+
+	/* add PF assigned VLAN or VLAN 0 */
+	ixgbe_set_vf_vlan(adapter, true, vfinfo->pf_vlan, vf);
+
+	/* reset offloads to defaults */
+	ixgbe_set_vmolr(hw, vf, !vfinfo->pf_vlan);
+
+	/* set outgoing tags for VFs */
+	if (!vfinfo->pf_vlan && !vfinfo->pf_qos && !num_tcs) {
+		ixgbe_clear_vmvir(adapter, vf);
+	} else {
+		if (vfinfo->pf_qos || !num_tcs)
+			ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
+					vfinfo->pf_qos, vf);
+		else
+			ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
+					adapter->default_up, vf);
+
+		if (vfinfo->spoofchk_enabled)
+			hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
+	}
+
+	/* reset multicast table array for vf */
+	adapter->vfinfo[vf].num_vf_mc_hashes = 0;
+
+	/* Flush and reset the mta with the new values */
+	ixgbe_set_rx_mode(adapter->netdev);
+
+	ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
+
+	/* reset VF api back to unknown */
+	adapter->vfinfo[vf].vf_api = ixgbe_mbox_api_10;
+}
+
+static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
+			    int vf, unsigned char *mac_addr)
+{
+	ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
+	memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
+	ixgbe_add_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
+
+	return 0;
+}
+
+static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
+				int vf, int index, unsigned char *mac_addr)
+{
+	struct list_head *pos;
+	struct vf_macvlans *entry;
+
+	if (index <= 1) {
+		list_for_each(pos, &adapter->vf_mvs.l) {
+			entry = list_entry(pos, struct vf_macvlans, l);
+			if (entry->vf == vf) {
+				entry->vf = -1;
+				entry->free = true;
+				entry->is_macvlan = false;
+				ixgbe_del_mac_filter(adapter,
+						     entry->vf_macvlan, vf);
+			}
+		}
+	}
+
+	/*
+	 * If index was zero then we were asked to clear the uc list
+	 * for the VF.  We're done.
+	 */
+	if (!index)
+		return 0;
+
+	entry = NULL;
+
+	list_for_each(pos, &adapter->vf_mvs.l) {
+		entry = list_entry(pos, struct vf_macvlans, l);
+		if (entry->free)
+			break;
+	}
+
+	/*
+	 * If we traversed the entire list and didn't find a free entry
+	 * then we're out of space on the RAR table.  Also entry may
+	 * be NULL because the original memory allocation for the list
+	 * failed, which is not fatal but does mean we can't support
+	 * VF requests for MACVLAN because we couldn't allocate
+	 * memory for the list management required.
+	 */
+	if (!entry || !entry->free)
+		return -ENOSPC;
+
+	entry->free = false;
+	entry->is_macvlan = true;
+	entry->vf = vf;
+	memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
+
+	ixgbe_add_mac_filter(adapter, mac_addr, vf);
+
+	return 0;
+}
+
+int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
+{
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	unsigned int vfn = (event_mask & 0x3f);
+
+	bool enable = ((event_mask & 0x10000000U) != 0);
+
+	if (enable)
+		eth_zero_addr(adapter->vfinfo[vfn].vf_mac_addresses);
+
+	return 0;
+}
+
+static inline void ixgbe_write_qde(struct ixgbe_adapter *adapter, u32 vf,
+				   u32 qde)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
+	u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
+	int i;
+
+	for (i = vf * q_per_pool; i < ((vf + 1) * q_per_pool); i++) {
+		u32 reg;
+
+		/* flush previous write */
+		IXGBE_WRITE_FLUSH(hw);
+
+		/* indicate to hardware that we want to set drop enable */
+		reg = IXGBE_QDE_WRITE | IXGBE_QDE_ENABLE;
+		reg |= i <<  IXGBE_QDE_IDX_SHIFT;
+		IXGBE_WRITE_REG(hw, IXGBE_QDE, reg);
+	}
+}
+
+static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
+{
+	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
+	struct ixgbe_hw *hw = &adapter->hw;
+	unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
+	u32 reg, reg_offset, vf_shift;
+	u32 msgbuf[4] = {0, 0, 0, 0};
+	u8 *addr = (u8 *)(&msgbuf[1]);
+	u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
+	int i;
+
+	e_info(probe, "VF Reset msg received from vf %d\n", vf);
+
+	/* reset the filters for the device */
+	ixgbe_vf_reset_event(adapter, vf);
+
+	/* set vf mac address */
+	if (!is_zero_ether_addr(vf_mac))
+		ixgbe_set_vf_mac(adapter, vf, vf_mac);
+
+	vf_shift = vf % 32;
+	reg_offset = vf / 32;
+
+	/* enable transmit for vf */
+	reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset));
+	reg |= 1 << vf_shift;
+	IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
+
+	/* force drop enable for all VF Rx queues */
+	ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE);
+
+	/* enable receive for vf */
+	reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
+	reg |= 1 << vf_shift;
+	/*
+	 * The 82599 cannot support a mix of jumbo and non-jumbo PF/VFs.
+	 * For more info take a look at ixgbe_set_vf_lpe
+	 */
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+		struct net_device *dev = adapter->netdev;
+		int pf_max_frame = dev->mtu + ETH_HLEN;
+
+#ifdef CONFIG_FCOE
+		if (dev->features & NETIF_F_FCOE_MTU)
+			pf_max_frame = max_t(int, pf_max_frame,
+					     IXGBE_FCOE_JUMBO_FRAME_SIZE);
+
+#endif /* CONFIG_FCOE */
+		if (pf_max_frame > ETH_FRAME_LEN)
+			reg &= ~(1 << vf_shift);
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
+
+	/* enable VF mailbox for further messages */
+	adapter->vfinfo[vf].clear_to_send = true;
+
+	/* Enable counting of spoofed packets in the SSVPC register */
+	reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset));
+	reg |= (1 << vf_shift);
+	IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
+
+	/*
+	 * Reset the VFs TDWBAL and TDWBAH registers
+	 * which are not cleared by an FLR
+	 */
+	for (i = 0; i < q_per_pool; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBAHn(q_per_pool, vf, i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBALn(q_per_pool, vf, i), 0);
+	}
+
+	/* reply to reset with ack and vf mac address */
+	msgbuf[0] = IXGBE_VF_RESET;
+	if (!is_zero_ether_addr(vf_mac)) {
+		msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
+		memcpy(addr, vf_mac, ETH_ALEN);
+	} else {
+		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
+		dev_warn(&adapter->pdev->dev,
+			 "VF %d has no MAC address assigned, you may have to assign one manually\n",
+			 vf);
+	}
+
+	/*
+	 * Piggyback the multicast filter type so VF can compute the
+	 * correct vectors
+	 */
+	msgbuf[3] = hw->mac.mc_filter_type;
+	ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf);
+
+	return 0;
+}
+
+static int ixgbe_set_vf_mac_addr(struct ixgbe_adapter *adapter,
+				 u32 *msgbuf, u32 vf)
+{
+	u8 *new_mac = ((u8 *)(&msgbuf[1]));
+
+	if (!is_valid_ether_addr(new_mac)) {
+		e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
+		return -1;
+	}
+
+	if (adapter->vfinfo[vf].pf_set_mac &&
+	    !ether_addr_equal(adapter->vfinfo[vf].vf_mac_addresses, new_mac)) {
+		e_warn(drv,
+		       "VF %d attempted to override administratively set MAC address\n"
+		       "Reload the VF driver to resume operations\n",
+		       vf);
+		return -1;
+	}
+
+	return ixgbe_set_vf_mac(adapter, vf, new_mac) < 0;
+}
+
+static int ixgbe_find_vlvf_entry(struct ixgbe_hw *hw, u32 vlan)
+{
+	u32 vlvf;
+	s32 regindex;
+
+	/* short cut the special case */
+	if (vlan == 0)
+		return 0;
+
+	/* Search for the vlan id in the VLVF entries */
+	for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
+		vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
+		if ((vlvf & VLAN_VID_MASK) == vlan)
+			break;
+	}
+
+	/* Return a negative value if not found */
+	if (regindex >= IXGBE_VLVF_ENTRIES)
+		regindex = -1;
+
+	return regindex;
+}
+
+static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter,
+				 u32 *msgbuf, u32 vf)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT;
+	int vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
+	int err;
+	s32 reg_ndx;
+	u32 vlvf;
+	u32 bits;
+	u8 tcs = netdev_get_num_tc(adapter->netdev);
+
+	if (adapter->vfinfo[vf].pf_vlan || tcs) {
+		e_warn(drv,
+		       "VF %d attempted to override administratively set VLAN configuration\n"
+		       "Reload the VF driver to resume operations\n",
+		       vf);
+		return -1;
+	}
+
+	if (add)
+		adapter->vfinfo[vf].vlan_count++;
+	else if (adapter->vfinfo[vf].vlan_count)
+		adapter->vfinfo[vf].vlan_count--;
+
+	/* in case of promiscuous mode any VLAN filter set for a VF must
+	 * also have the PF pool added to it.
+	 */
+	if (add && adapter->netdev->flags & IFF_PROMISC)
+		err = ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0));
+
+	err = ixgbe_set_vf_vlan(adapter, add, vid, vf);
+	if (!err && adapter->vfinfo[vf].spoofchk_enabled)
+		hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
+
+	/* Go through all the checks to see if the VLAN filter should
+	 * be wiped completely.
+	 */
+	if (!add && adapter->netdev->flags & IFF_PROMISC) {
+		reg_ndx = ixgbe_find_vlvf_entry(hw, vid);
+		if (reg_ndx < 0)
+			return err;
+		vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(reg_ndx));
+		/* See if any other pools are set for this VLAN filter
+		 * entry other than the PF.
+		 */
+		if (VMDQ_P(0) < 32) {
+			bits = IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2));
+			bits &= ~(1 << VMDQ_P(0));
+			bits |= IXGBE_READ_REG(hw,
+					       IXGBE_VLVFB(reg_ndx * 2) + 1);
+		} else {
+			bits = IXGBE_READ_REG(hw,
+					      IXGBE_VLVFB(reg_ndx * 2) + 1);
+			bits &= ~(1 << (VMDQ_P(0) - 32));
+			bits |= IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2));
+		}
+
+		/* If the filter was removed then ensure PF pool bit
+		 * is cleared if the PF only added itself to the pool
+		 * because the PF is in promiscuous mode.
+		 */
+		if ((vlvf & VLAN_VID_MASK) == vid &&
+		    !test_bit(vid, adapter->active_vlans) && !bits)
+			ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0));
+	}
+
+	return err;
+}
+
+static int ixgbe_set_vf_macvlan_msg(struct ixgbe_adapter *adapter,
+				    u32 *msgbuf, u32 vf)
+{
+	u8 *new_mac = ((u8 *)(&msgbuf[1]));
+	int index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
+		    IXGBE_VT_MSGINFO_SHIFT;
+	int err;
+
+	if (adapter->vfinfo[vf].pf_set_mac && index > 0) {
+		e_warn(drv,
+		       "VF %d requested MACVLAN filter but is administratively denied\n",
+		       vf);
+		return -1;
+	}
+
+	/* An non-zero index indicates the VF is setting a filter */
+	if (index) {
+		if (!is_valid_ether_addr(new_mac)) {
+			e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
+			return -1;
+		}
+
+		/*
+		 * If the VF is allowed to set MAC filters then turn off
+		 * anti-spoofing to avoid false positives.
+		 */
+		if (adapter->vfinfo[vf].spoofchk_enabled)
+			ixgbe_ndo_set_vf_spoofchk(adapter->netdev, vf, false);
+	}
+
+	err = ixgbe_set_vf_macvlan(adapter, vf, index, new_mac);
+	if (err == -ENOSPC)
+		e_warn(drv,
+		       "VF %d has requested a MACVLAN filter but there is no space for it\n",
+		       vf);
+
+	return err < 0;
+}
+
+static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter,
+				  u32 *msgbuf, u32 vf)
+{
+	int api = msgbuf[1];
+
+	switch (api) {
+	case ixgbe_mbox_api_10:
+	case ixgbe_mbox_api_11:
+	case ixgbe_mbox_api_12:
+		adapter->vfinfo[vf].vf_api = api;
+		return 0;
+	default:
+		break;
+	}
+
+	e_info(drv, "VF %d requested invalid api version %u\n", vf, api);
+
+	return -1;
+}
+
+static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter,
+			       u32 *msgbuf, u32 vf)
+{
+	struct net_device *dev = adapter->netdev;
+	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
+	unsigned int default_tc = 0;
+	u8 num_tcs = netdev_get_num_tc(dev);
+
+	/* verify the PF is supporting the correct APIs */
+	switch (adapter->vfinfo[vf].vf_api) {
+	case ixgbe_mbox_api_20:
+	case ixgbe_mbox_api_11:
+	case ixgbe_mbox_api_12:
+		break;
+	default:
+		return -1;
+	}
+
+	/* only allow 1 Tx queue for bandwidth limiting */
+	msgbuf[IXGBE_VF_TX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
+	msgbuf[IXGBE_VF_RX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
+
+	/* if TCs > 1 determine which TC belongs to default user priority */
+	if (num_tcs > 1)
+		default_tc = netdev_get_prio_tc_map(dev, adapter->default_up);
+
+	/* notify VF of need for VLAN tag stripping, and correct queue */
+	if (num_tcs)
+		msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
+	else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos)
+		msgbuf[IXGBE_VF_TRANS_VLAN] = 1;
+	else
+		msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
+
+	/* notify VF of default queue */
+	msgbuf[IXGBE_VF_DEF_QUEUE] = default_tc;
+
+	return 0;
+}
+
+static int ixgbe_get_vf_reta(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+	u32 i, j;
+	u32 *out_buf = &msgbuf[1];
+	const u8 *reta = adapter->rss_indir_tbl;
+	u32 reta_size = ixgbe_rss_indir_tbl_entries(adapter);
+
+	/* Check if operation is permitted */
+	if (!adapter->vfinfo[vf].rss_query_enabled)
+		return -EPERM;
+
+	/* verify the PF is supporting the correct API */
+	if (adapter->vfinfo[vf].vf_api != ixgbe_mbox_api_12)
+		return -EOPNOTSUPP;
+
+	/* This mailbox command is supported (required) only for 82599 and x540
+	 * VFs which support up to 4 RSS queues. Therefore we will compress the
+	 * RETA by saving only 2 bits from each entry. This way we will be able
+	 * to transfer the whole RETA in a single mailbox operation.
+	 */
+	for (i = 0; i < reta_size / 16; i++) {
+		out_buf[i] = 0;
+		for (j = 0; j < 16; j++)
+			out_buf[i] |= (u32)(reta[16 * i + j] & 0x3) << (2 * j);
+	}
+
+	return 0;
+}
+
+static int ixgbe_get_vf_rss_key(struct ixgbe_adapter *adapter,
+				u32 *msgbuf, u32 vf)
+{
+	u32 *rss_key = &msgbuf[1];
+
+	/* Check if the operation is permitted */
+	if (!adapter->vfinfo[vf].rss_query_enabled)
+		return -EPERM;
+
+	/* verify the PF is supporting the correct API */
+	if (adapter->vfinfo[vf].vf_api != ixgbe_mbox_api_12)
+		return -EOPNOTSUPP;
+
+	memcpy(rss_key, adapter->rss_key, sizeof(adapter->rss_key));
+
+	return 0;
+}
+
+static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
+{
+	u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
+	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
+	struct ixgbe_hw *hw = &adapter->hw;
+	s32 retval;
+
+	retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
+
+	if (retval) {
+		pr_err("Error receiving message from VF\n");
+		return retval;
+	}
+
+	/* this is a message we already processed, do nothing */
+	if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
+		return 0;
+
+	/* flush the ack before we write any messages back */
+	IXGBE_WRITE_FLUSH(hw);
+
+	if (msgbuf[0] == IXGBE_VF_RESET)
+		return ixgbe_vf_reset_msg(adapter, vf);
+
+	/*
+	 * until the vf completes a virtual function reset it should not be
+	 * allowed to start any configuration.
+	 */
+	if (!adapter->vfinfo[vf].clear_to_send) {
+		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
+		ixgbe_write_mbx(hw, msgbuf, 1, vf);
+		return 0;
+	}
+
+	switch ((msgbuf[0] & 0xFFFF)) {
+	case IXGBE_VF_SET_MAC_ADDR:
+		retval = ixgbe_set_vf_mac_addr(adapter, msgbuf, vf);
+		break;
+	case IXGBE_VF_SET_MULTICAST:
+		retval = ixgbe_set_vf_multicasts(adapter, msgbuf, vf);
+		break;
+	case IXGBE_VF_SET_VLAN:
+		retval = ixgbe_set_vf_vlan_msg(adapter, msgbuf, vf);
+		break;
+	case IXGBE_VF_SET_LPE:
+		retval = ixgbe_set_vf_lpe(adapter, msgbuf, vf);
+		break;
+	case IXGBE_VF_SET_MACVLAN:
+		retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf);
+		break;
+	case IXGBE_VF_API_NEGOTIATE:
+		retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf);
+		break;
+	case IXGBE_VF_GET_QUEUES:
+		retval = ixgbe_get_vf_queues(adapter, msgbuf, vf);
+		break;
+	case IXGBE_VF_GET_RETA:
+		retval = ixgbe_get_vf_reta(adapter, msgbuf, vf);
+		break;
+	case IXGBE_VF_GET_RSS_KEY:
+		retval = ixgbe_get_vf_rss_key(adapter, msgbuf, vf);
+		break;
+	default:
+		e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
+		retval = IXGBE_ERR_MBX;
+		break;
+	}
+
+	/* notify the VF of the results of what it sent us */
+	if (retval)
+		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
+	else
+		msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
+
+	msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
+
+	ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
+
+	return retval;
+}
+
+static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 msg = IXGBE_VT_MSGTYPE_NACK;
+
+	/* if device isn't clear to send it shouldn't be reading either */
+	if (!adapter->vfinfo[vf].clear_to_send)
+		ixgbe_write_mbx(hw, &msg, 1, vf);
+}
+
+void ixgbe_msg_task(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 vf;
+
+	for (vf = 0; vf < adapter->num_vfs; vf++) {
+		/* process any reset requests */
+		if (!ixgbe_check_for_rst(hw, vf))
+			ixgbe_vf_reset_event(adapter, vf);
+
+		/* process any messages pending */
+		if (!ixgbe_check_for_msg(hw, vf))
+			ixgbe_rcv_msg_from_vf(adapter, vf);
+
+		/* process any acks */
+		if (!ixgbe_check_for_ack(hw, vf))
+			ixgbe_rcv_ack_from_vf(adapter, vf);
+	}
+}
+
+void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	/* disable transmit and receive for all vfs */
+	IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
+
+	IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
+	IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
+}
+
+void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 ping;
+	int i;
+
+	for (i = 0 ; i < adapter->num_vfs; i++) {
+		ping = IXGBE_PF_CONTROL_MSG;
+		if (adapter->vfinfo[i].clear_to_send)
+			ping |= IXGBE_VT_MSGTYPE_CTS;
+		ixgbe_write_mbx(hw, &ping, 1, i);
+	}
+}
+
+int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	if (!is_valid_ether_addr(mac) || (vf >= adapter->num_vfs))
+		return -EINVAL;
+	adapter->vfinfo[vf].pf_set_mac = true;
+	dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
+	dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
+				      " change effective.");
+	if (test_bit(__IXGBE_DOWN, &adapter->state)) {
+		dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
+			 " but the PF device is not up.\n");
+		dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
+			 " attempting to use the VF device.\n");
+	}
+	return ixgbe_set_vf_mac(adapter, vf, mac);
+}
+
+static int ixgbe_enable_port_vlan(struct ixgbe_adapter *adapter, int vf,
+				  u16 vlan, u8 qos)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int err;
+
+	err = ixgbe_set_vf_vlan(adapter, true, vlan, vf);
+	if (err)
+		goto out;
+
+	ixgbe_set_vmvir(adapter, vlan, qos, vf);
+	ixgbe_set_vmolr(hw, vf, false);
+	if (adapter->vfinfo[vf].spoofchk_enabled)
+		hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
+	adapter->vfinfo[vf].vlan_count++;
+
+	/* enable hide vlan on X550 */
+	if (hw->mac.type >= ixgbe_mac_X550)
+		ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE |
+				IXGBE_QDE_HIDE_VLAN);
+
+	adapter->vfinfo[vf].pf_vlan = vlan;
+	adapter->vfinfo[vf].pf_qos = qos;
+	dev_info(&adapter->pdev->dev,
+		 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
+	if (test_bit(__IXGBE_DOWN, &adapter->state)) {
+		dev_warn(&adapter->pdev->dev,
+			 "The VF VLAN has been set, but the PF device is not up.\n");
+		dev_warn(&adapter->pdev->dev,
+			 "Bring the PF device up before attempting to use the VF device.\n");
+	}
+
+out:
+	return err;
+}
+
+static int ixgbe_disable_port_vlan(struct ixgbe_adapter *adapter, int vf)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int err;
+
+	err = ixgbe_set_vf_vlan(adapter, false,
+				adapter->vfinfo[vf].pf_vlan, vf);
+	ixgbe_clear_vmvir(adapter, vf);
+	ixgbe_set_vmolr(hw, vf, true);
+	hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
+	if (adapter->vfinfo[vf].vlan_count)
+		adapter->vfinfo[vf].vlan_count--;
+
+	/* disable hide VLAN on X550 */
+	if (hw->mac.type >= ixgbe_mac_X550)
+		ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE);
+
+	adapter->vfinfo[vf].pf_vlan = 0;
+	adapter->vfinfo[vf].pf_qos = 0;
+
+	return err;
+}
+
+int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
+{
+	int err = 0;
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
+		return -EINVAL;
+	if (vlan || qos) {
+		/* Check if there is already a port VLAN set, if so
+		 * we have to delete the old one first before we
+		 * can set the new one.  The usage model had
+		 * previously assumed the user would delete the
+		 * old port VLAN before setting a new one but this
+		 * is not necessarily the case.
+		 */
+		if (adapter->vfinfo[vf].pf_vlan)
+			err = ixgbe_disable_port_vlan(adapter, vf);
+		if (err)
+			goto out;
+		err = ixgbe_enable_port_vlan(adapter, vf, vlan, qos);
+	} else {
+		err = ixgbe_disable_port_vlan(adapter, vf);
+	}
+
+out:
+	return err;
+}
+
+static int ixgbe_link_mbps(struct ixgbe_adapter *adapter)
+{
+	switch (adapter->link_speed) {
+	case IXGBE_LINK_SPEED_100_FULL:
+		return 100;
+	case IXGBE_LINK_SPEED_1GB_FULL:
+		return 1000;
+	case IXGBE_LINK_SPEED_10GB_FULL:
+		return 10000;
+	default:
+		return 0;
+	}
+}
+
+static void ixgbe_set_vf_rate_limit(struct ixgbe_adapter *adapter, int vf)
+{
+	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 bcnrc_val = 0;
+	u16 queue, queues_per_pool;
+	u16 tx_rate = adapter->vfinfo[vf].tx_rate;
+
+	if (tx_rate) {
+		/* start with base link speed value */
+		bcnrc_val = adapter->vf_rate_link_speed;
+
+		/* Calculate the rate factor values to set */
+		bcnrc_val <<= IXGBE_RTTBCNRC_RF_INT_SHIFT;
+		bcnrc_val /= tx_rate;
+
+		/* clear everything but the rate factor */
+		bcnrc_val &= IXGBE_RTTBCNRC_RF_INT_MASK |
+			     IXGBE_RTTBCNRC_RF_DEC_MASK;
+
+		/* enable the rate scheduler */
+		bcnrc_val |= IXGBE_RTTBCNRC_RS_ENA;
+	}
+
+	/*
+	 * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
+	 * register. Typically MMW_SIZE=0x014 if 9728-byte jumbo is supported
+	 * and 0x004 otherwise.
+	 */
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x4);
+		break;
+	case ixgbe_mac_X540:
+		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x14);
+		break;
+	default:
+		break;
+	}
+
+	/* determine how many queues per pool based on VMDq mask */
+	queues_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
+
+	/* write value for all Tx queues belonging to VF */
+	for (queue = 0; queue < queues_per_pool; queue++) {
+		unsigned int reg_idx = (vf * queues_per_pool) + queue;
+
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, reg_idx);
+		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val);
+	}
+}
+
+void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
+{
+	int i;
+
+	/* VF Tx rate limit was not set */
+	if (!adapter->vf_rate_link_speed)
+		return;
+
+	if (ixgbe_link_mbps(adapter) != adapter->vf_rate_link_speed) {
+		adapter->vf_rate_link_speed = 0;
+		dev_info(&adapter->pdev->dev,
+			 "Link speed has been changed. VF Transmit rate is disabled\n");
+	}
+
+	for (i = 0; i < adapter->num_vfs; i++) {
+		if (!adapter->vf_rate_link_speed)
+			adapter->vfinfo[i].tx_rate = 0;
+
+		ixgbe_set_vf_rate_limit(adapter, i);
+	}
+}
+
+int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
+			int max_tx_rate)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	int link_speed;
+
+	/* verify VF is active */
+	if (vf >= adapter->num_vfs)
+		return -EINVAL;
+
+	/* verify link is up */
+	if (!adapter->link_up)
+		return -EINVAL;
+
+	/* verify we are linked at 10Gbps */
+	link_speed = ixgbe_link_mbps(adapter);
+	if (link_speed != 10000)
+		return -EINVAL;
+
+	if (min_tx_rate)
+		return -EINVAL;
+
+	/* rate limit cannot be less than 10Mbs or greater than link speed */
+	if (max_tx_rate && ((max_tx_rate <= 10) || (max_tx_rate > link_speed)))
+		return -EINVAL;
+
+	/* store values */
+	adapter->vf_rate_link_speed = link_speed;
+	adapter->vfinfo[vf].tx_rate = max_tx_rate;
+
+	/* update hardware configuration */
+	ixgbe_set_vf_rate_limit(adapter, vf);
+
+	return 0;
+}
+
+int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	int vf_target_reg = vf >> 3;
+	int vf_target_shift = vf % 8;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 regval;
+
+	if (vf >= adapter->num_vfs)
+		return -EINVAL;
+
+	adapter->vfinfo[vf].spoofchk_enabled = setting;
+
+	regval = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
+	regval &= ~(1 << vf_target_shift);
+	regval |= (setting << vf_target_shift);
+	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), regval);
+
+	if (adapter->vfinfo[vf].vlan_count) {
+		vf_target_shift += IXGBE_SPOOF_VLANAS_SHIFT;
+		regval = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
+		regval &= ~(1 << vf_target_shift);
+		regval |= (setting << vf_target_shift);
+		IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), regval);
+	}
+
+	return 0;
+}
+
+int ixgbe_ndo_set_vf_rss_query_en(struct net_device *netdev, int vf,
+				  bool setting)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	/* This operation is currently supported only for 82599 and x540
+	 * devices.
+	 */
+	if (adapter->hw.mac.type < ixgbe_mac_82599EB ||
+	    adapter->hw.mac.type >= ixgbe_mac_X550)
+		return -EOPNOTSUPP;
+
+	if (vf >= adapter->num_vfs)
+		return -EINVAL;
+
+	adapter->vfinfo[vf].rss_query_enabled = setting;
+
+	return 0;
+}
+
+int ixgbe_ndo_get_vf_config(struct net_device *netdev,
+			    int vf, struct ifla_vf_info *ivi)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	if (vf >= adapter->num_vfs)
+		return -EINVAL;
+	ivi->vf = vf;
+	memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
+	ivi->max_tx_rate = adapter->vfinfo[vf].tx_rate;
+	ivi->min_tx_rate = 0;
+	ivi->vlan = adapter->vfinfo[vf].pf_vlan;
+	ivi->qos = adapter->vfinfo[vf].pf_qos;
+	ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled;
+	ivi->rss_query_en = adapter->vfinfo[vf].rss_query_enabled;
+	return 0;
+}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
new file mode 100644
index 000000000..2c197e6d1
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
@@ -0,0 +1,71 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_SRIOV_H_
+#define _IXGBE_SRIOV_H_
+
+/*  ixgbe driver limit the max number of VFs could be enabled to
+ *  63 (IXGBE_MAX_VF_FUNCTIONS - 1)
+ */
+#define IXGBE_MAX_VFS_DRV_LIMIT  (IXGBE_MAX_VF_FUNCTIONS - 1)
+
+#ifdef CONFIG_PCI_IOV
+void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter);
+#endif
+void ixgbe_msg_task(struct ixgbe_adapter *adapter);
+int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask);
+void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter);
+void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter);
+int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int queue, u8 *mac);
+int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int queue, u16 vlan,
+			   u8 qos);
+int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
+			int max_tx_rate);
+int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting);
+int ixgbe_ndo_set_vf_rss_query_en(struct net_device *netdev, int vf,
+				  bool setting);
+int ixgbe_ndo_get_vf_config(struct net_device *netdev,
+			    int vf, struct ifla_vf_info *ivi);
+void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter);
+int ixgbe_disable_sriov(struct ixgbe_adapter *adapter);
+#ifdef CONFIG_PCI_IOV
+void ixgbe_enable_sriov(struct ixgbe_adapter *adapter);
+#endif
+int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
+
+static inline void ixgbe_set_vmvir(struct ixgbe_adapter *adapter,
+				   u16 vid, u16 qos, u32 vf)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 vmvir = vid | (qos << VLAN_PRIO_SHIFT) | IXGBE_VMVIR_VLANA_DEFAULT;
+
+	IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), vmvir);
+}
+
+#endif /* _IXGBE_SRIOV_H_ */
+
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
new file mode 100644
index 000000000..ef6df3d64
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
@@ -0,0 +1,230 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include "ixgbe_common.h"
+#include "ixgbe_type.h"
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/hwmon.h>
+
+/* hwmon callback functions */
+static ssize_t ixgbe_hwmon_show_location(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	return sprintf(buf, "loc%u\n",
+		       ixgbe_attr->sensor->location);
+}
+
+static ssize_t ixgbe_hwmon_show_temp(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value;
+
+	/* reset the temp field */
+	ixgbe_attr->hw->mac.ops.get_thermal_sensor_data(ixgbe_attr->hw);
+
+	value = ixgbe_attr->sensor->temp;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t ixgbe_hwmon_show_cautionthresh(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value = ixgbe_attr->sensor->caution_thresh;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t ixgbe_hwmon_show_maxopthresh(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *ixgbe_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value = ixgbe_attr->sensor->max_op_thresh;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+/**
+ * ixgbe_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file.
+ * @adapter: pointer to the adapter structure
+ * @offset: offset in the eeprom sensor data table
+ * @type: type of sensor data to display
+ *
+ * For each file we want in hwmon's sysfs interface we need a device_attribute
+ * This is included in our hwmon_attr struct that contains the references to
+ * the data structures we need to get the data to display.
+ */
+static int ixgbe_add_hwmon_attr(struct ixgbe_adapter *adapter,
+				unsigned int offset, int type) {
+	int rc;
+	unsigned int n_attr;
+	struct hwmon_attr *ixgbe_attr;
+
+	n_attr = adapter->ixgbe_hwmon_buff->n_hwmon;
+	ixgbe_attr = &adapter->ixgbe_hwmon_buff->hwmon_list[n_attr];
+
+	switch (type) {
+	case IXGBE_HWMON_TYPE_LOC:
+		ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_location;
+		snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+			 "temp%u_label", offset + 1);
+		break;
+	case IXGBE_HWMON_TYPE_TEMP:
+		ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_temp;
+		snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+			 "temp%u_input", offset + 1);
+		break;
+	case IXGBE_HWMON_TYPE_CAUTION:
+		ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_cautionthresh;
+		snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+			 "temp%u_max", offset + 1);
+		break;
+	case IXGBE_HWMON_TYPE_MAX:
+		ixgbe_attr->dev_attr.show = ixgbe_hwmon_show_maxopthresh;
+		snprintf(ixgbe_attr->name, sizeof(ixgbe_attr->name),
+			 "temp%u_crit", offset + 1);
+		break;
+	default:
+		rc = -EPERM;
+		return rc;
+	}
+
+	/* These always the same regardless of type */
+	ixgbe_attr->sensor =
+		&adapter->hw.mac.thermal_sensor_data.sensor[offset];
+	ixgbe_attr->hw = &adapter->hw;
+	ixgbe_attr->dev_attr.store = NULL;
+	ixgbe_attr->dev_attr.attr.mode = S_IRUGO;
+	ixgbe_attr->dev_attr.attr.name = ixgbe_attr->name;
+	sysfs_attr_init(&ixgbe_attr->dev_attr.attr);
+
+	adapter->ixgbe_hwmon_buff->attrs[n_attr] = &ixgbe_attr->dev_attr.attr;
+
+	++adapter->ixgbe_hwmon_buff->n_hwmon;
+
+	return 0;
+}
+
+static void ixgbe_sysfs_del_adapter(struct ixgbe_adapter *adapter)
+{
+}
+
+/* called from ixgbe_main.c */
+void ixgbe_sysfs_exit(struct ixgbe_adapter *adapter)
+{
+	ixgbe_sysfs_del_adapter(adapter);
+}
+
+/* called from ixgbe_main.c */
+int ixgbe_sysfs_init(struct ixgbe_adapter *adapter)
+{
+	struct hwmon_buff *ixgbe_hwmon;
+	struct device *hwmon_dev;
+	unsigned int i;
+	int rc = 0;
+
+	/* If this method isn't defined we don't support thermals */
+	if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL) {
+		goto exit;
+	}
+
+	/* Don't create thermal hwmon interface if no sensors present */
+	if (adapter->hw.mac.ops.init_thermal_sensor_thresh(&adapter->hw))
+		goto exit;
+
+	ixgbe_hwmon = devm_kzalloc(&adapter->pdev->dev, sizeof(*ixgbe_hwmon),
+				   GFP_KERNEL);
+	if (ixgbe_hwmon == NULL) {
+		rc = -ENOMEM;
+		goto exit;
+	}
+	adapter->ixgbe_hwmon_buff = ixgbe_hwmon;
+
+	for (i = 0; i < IXGBE_MAX_SENSORS; i++) {
+		/*
+		 * Only create hwmon sysfs entries for sensors that have
+		 * meaningful data for.
+		 */
+		if (adapter->hw.mac.thermal_sensor_data.sensor[i].location == 0)
+			continue;
+
+		/* Bail if any hwmon attr struct fails to initialize */
+		rc = ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_CAUTION);
+		if (rc)
+			goto exit;
+		rc = ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_LOC);
+		if (rc)
+			goto exit;
+		rc = ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_TEMP);
+		if (rc)
+			goto exit;
+		rc = ixgbe_add_hwmon_attr(adapter, i, IXGBE_HWMON_TYPE_MAX);
+		if (rc)
+			goto exit;
+	}
+
+	ixgbe_hwmon->groups[0] = &ixgbe_hwmon->group;
+	ixgbe_hwmon->group.attrs = ixgbe_hwmon->attrs;
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(&adapter->pdev->dev,
+							   "ixgbe",
+							   ixgbe_hwmon,
+							   ixgbe_hwmon->groups);
+	if (IS_ERR(hwmon_dev))
+		rc = PTR_ERR(hwmon_dev);
+exit:
+	return rc;
+}
+
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
new file mode 100644
index 000000000..dd6ba5916
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -0,0 +1,3342 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_TYPE_H_
+#define _IXGBE_TYPE_H_
+
+#include <linux/types.h>
+#include <linux/mdio.h>
+#include <linux/netdevice.h>
+
+/* Device IDs */
+#define IXGBE_DEV_ID_82598               0x10B6
+#define IXGBE_DEV_ID_82598_BX            0x1508
+#define IXGBE_DEV_ID_82598AF_DUAL_PORT   0x10C6
+#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
+#define IXGBE_DEV_ID_82598EB_SFP_LOM     0x10DB
+#define IXGBE_DEV_ID_82598AT             0x10C8
+#define IXGBE_DEV_ID_82598AT2            0x150B
+#define IXGBE_DEV_ID_82598EB_CX4         0x10DD
+#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC
+#define IXGBE_DEV_ID_82598_DA_DUAL_PORT  0x10F1
+#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM      0x10E1
+#define IXGBE_DEV_ID_82598EB_XF_LR       0x10F4
+#define IXGBE_DEV_ID_82599_KX4           0x10F7
+#define IXGBE_DEV_ID_82599_KX4_MEZZ      0x1514
+#define IXGBE_DEV_ID_82599_KR            0x1517
+#define IXGBE_DEV_ID_82599_T3_LOM        0x151C
+#define IXGBE_DEV_ID_82599_CX4           0x10F9
+#define IXGBE_DEV_ID_82599_SFP           0x10FB
+#define IXGBE_DEV_ID_82599_BACKPLANE_FCOE       0x152a
+#define IXGBE_DEV_ID_82599_SFP_FCOE      0x1529
+#define IXGBE_SUBDEV_ID_82599_SFP        0x11A9
+#define IXGBE_SUBDEV_ID_82599_SFP_WOL0   0x1071
+#define IXGBE_SUBDEV_ID_82599_RNDC       0x1F72
+#define IXGBE_SUBDEV_ID_82599_560FLR     0x17D0
+#define IXGBE_SUBDEV_ID_82599_SP_560FLR  0x211B
+#define IXGBE_SUBDEV_ID_82599_ECNA_DP    0x0470
+#define IXGBE_SUBDEV_ID_82599_LOM_SFP    0x8976
+#define IXGBE_DEV_ID_82599_SFP_EM        0x1507
+#define IXGBE_DEV_ID_82599_SFP_SF2       0x154D
+#define IXGBE_DEV_ID_82599EN_SFP         0x1557
+#define IXGBE_SUBDEV_ID_82599EN_SFP_OCP1 0x0001
+#define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
+#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
+#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ  0x000C
+#define IXGBE_DEV_ID_82599_LS            0x154F
+#define IXGBE_DEV_ID_X540T               0x1528
+#define IXGBE_DEV_ID_82599_SFP_SF_QP     0x154A
+#define IXGBE_DEV_ID_82599_QSFP_SF_QP    0x1558
+#define IXGBE_DEV_ID_X540T1              0x1560
+
+#define IXGBE_DEV_ID_X550T		0x1563
+#define IXGBE_DEV_ID_X550EM_X_KX4	0x15AA
+#define IXGBE_DEV_ID_X550EM_X_KR	0x15AB
+#define IXGBE_DEV_ID_X550EM_X_SFP	0x15AC
+#define IXGBE_DEV_ID_X550EM_X_10G_T	0x15AD
+#define IXGBE_DEV_ID_X550EM_X_1G_T	0x15AE
+#define IXGBE_DEV_ID_X550_VF_HV	0x1564
+#define IXGBE_DEV_ID_X550_VF		0x1565
+#define IXGBE_DEV_ID_X550EM_X_VF	0x15A8
+#define IXGBE_DEV_ID_X550EM_X_VF_HV	0x15A9
+
+/* VF Device IDs */
+#define IXGBE_DEV_ID_82599_VF           0x10ED
+#define IXGBE_DEV_ID_X540_VF            0x1515
+#define IXGBE_DEV_ID_X550_VF		0x1565
+#define IXGBE_DEV_ID_X550EM_X_VF	0x15A8
+
+/* General Registers */
+#define IXGBE_CTRL      0x00000
+#define IXGBE_STATUS    0x00008
+#define IXGBE_CTRL_EXT  0x00018
+#define IXGBE_ESDP      0x00020
+#define IXGBE_EODSDP    0x00028
+#define IXGBE_I2CCTL_BY_MAC(_hw)((((_hw)->mac.type >= ixgbe_mac_X550) ? \
+					0x15F5C : 0x00028))
+#define IXGBE_LEDCTL    0x00200
+#define IXGBE_FRTIMER   0x00048
+#define IXGBE_TCPTIMER  0x0004C
+#define IXGBE_CORESPARE 0x00600
+#define IXGBE_EXVET     0x05078
+
+/* NVM Registers */
+#define IXGBE_EEC       0x10010
+#define IXGBE_EERD      0x10014
+#define IXGBE_EEWR      0x10018
+#define IXGBE_FLA       0x1001C
+#define IXGBE_EEMNGCTL  0x10110
+#define IXGBE_EEMNGDATA 0x10114
+#define IXGBE_FLMNGCTL  0x10118
+#define IXGBE_FLMNGDATA 0x1011C
+#define IXGBE_FLMNGCNT  0x10120
+#define IXGBE_FLOP      0x1013C
+#define IXGBE_GRC       0x10200
+
+/* General Receive Control */
+#define IXGBE_GRC_MNG  0x00000001 /* Manageability Enable */
+#define IXGBE_GRC_APME 0x00000002 /* APM enabled in EEPROM */
+
+#define IXGBE_VPDDIAG0  0x10204
+#define IXGBE_VPDDIAG1  0x10208
+
+/* I2CCTL Bit Masks */
+#define IXGBE_I2C_CLK_IN_BY_MAC(_hw)(((_hw)->mac.type) >= ixgbe_mac_X550 ? \
+					0x00004000 : 0x00000001)
+#define IXGBE_I2C_CLK_OUT_BY_MAC(_hw)(((_hw)->mac.type) >= ixgbe_mac_X550 ? \
+					0x00000200 : 0x00000002)
+#define IXGBE_I2C_DATA_IN_BY_MAC(_hw)(((_hw)->mac.type) >= ixgbe_mac_X550 ? \
+					0x00001000 : 0x00000004)
+#define IXGBE_I2C_DATA_OUT_BY_MAC(_hw)(((_hw)->mac.type) >= ixgbe_mac_X550 ? \
+					0x00000400 : 0x00000008)
+#define IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT	500
+
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR	0xF8
+#define IXGBE_EMC_INTERNAL_DATA		0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT	0x20
+#define IXGBE_EMC_DIODE1_DATA		0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT	0x19
+#define IXGBE_EMC_DIODE2_DATA		0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT	0x1A
+
+#define IXGBE_MAX_SENSORS		3
+
+struct ixgbe_thermal_diode_data {
+	u8 location;
+	u8 temp;
+	u8 caution_thresh;
+	u8 max_op_thresh;
+};
+
+struct ixgbe_thermal_sensor_data {
+	struct ixgbe_thermal_diode_data sensor[IXGBE_MAX_SENSORS];
+};
+
+/* Interrupt Registers */
+#define IXGBE_EICR      0x00800
+#define IXGBE_EICS      0x00808
+#define IXGBE_EIMS      0x00880
+#define IXGBE_EIMC      0x00888
+#define IXGBE_EIAC      0x00810
+#define IXGBE_EIAM      0x00890
+#define IXGBE_EICS_EX(_i)   (0x00A90 + (_i) * 4)
+#define IXGBE_EIMS_EX(_i)   (0x00AA0 + (_i) * 4)
+#define IXGBE_EIMC_EX(_i)   (0x00AB0 + (_i) * 4)
+#define IXGBE_EIAM_EX(_i)   (0x00AD0 + (_i) * 4)
+/*
+ * 82598 EITR is 16 bits but set the limits based on the max
+ * supported by all ixgbe hardware.  82599 EITR is only 12 bits,
+ * with the lower 3 always zero.
+ */
+#define IXGBE_MAX_INT_RATE 488281
+#define IXGBE_MIN_INT_RATE 956
+#define IXGBE_MAX_EITR     0x00000FF8
+#define IXGBE_MIN_EITR     8
+#define IXGBE_EITR(_i)  (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : \
+			 (0x012300 + (((_i) - 24) * 4)))
+#define IXGBE_EITR_ITR_INT_MASK 0x00000FF8
+#define IXGBE_EITR_LLI_MOD      0x00008000
+#define IXGBE_EITR_CNT_WDIS     0x80000000
+#define IXGBE_IVAR(_i)  (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */
+#define IXGBE_IVAR_MISC 0x00A00 /* misc MSI-X interrupt causes */
+#define IXGBE_EITRSEL   0x00894
+#define IXGBE_MSIXT     0x00000 /* MSI-X Table. 0x0000 - 0x01C */
+#define IXGBE_MSIXPBA   0x02000 /* MSI-X Pending bit array */
+#define IXGBE_PBACL(_i) (((_i) == 0) ? (0x11068) : (0x110C0 + ((_i) * 4)))
+#define IXGBE_GPIE      0x00898
+
+/* Flow Control Registers */
+#define IXGBE_FCADBUL   0x03210
+#define IXGBE_FCADBUH   0x03214
+#define IXGBE_FCAMACL   0x04328
+#define IXGBE_FCAMACH   0x0432C
+#define IXGBE_FCRTH_82599(_i) (0x03260 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_FCRTL_82599(_i) (0x03220 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_PFCTOP    0x03008
+#define IXGBE_FCTTV(_i) (0x03200 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_FCRTL(_i) (0x03220 + ((_i) * 8)) /* 8 of these (0-7) */
+#define IXGBE_FCRTH(_i) (0x03260 + ((_i) * 8)) /* 8 of these (0-7) */
+#define IXGBE_FCRTV     0x032A0
+#define IXGBE_FCCFG     0x03D00
+#define IXGBE_TFCS      0x0CE00
+
+/* Receive DMA Registers */
+#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : \
+			 (0x0D000 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : \
+			 (0x0D004 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : \
+			 (0x0D008 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDH(_i)   (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : \
+			 (0x0D010 + (((_i) - 64) * 0x40)))
+#define IXGBE_RDT(_i)   (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : \
+			 (0x0D018 + (((_i) - 64) * 0x40)))
+#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \
+			 (0x0D028 + (((_i) - 64) * 0x40)))
+#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
+			 (0x0D02C + (((_i) - 64) * 0x40)))
+#define IXGBE_RSCDBU     0x03028
+#define IXGBE_RDDCC      0x02F20
+#define IXGBE_RXMEMWRAP  0x03190
+#define IXGBE_STARCTRL   0x03024
+/*
+ * Split and Replication Receive Control Registers
+ * 00-15 : 0x02100 + n*4
+ * 16-64 : 0x01014 + n*0x40
+ * 64-127: 0x0D014 + (n-64)*0x40
+ */
+#define IXGBE_SRRCTL(_i) (((_i) <= 15) ? (0x02100 + ((_i) * 4)) : \
+			  (((_i) < 64) ? (0x01014 + ((_i) * 0x40)) : \
+			  (0x0D014 + (((_i) - 64) * 0x40))))
+/*
+ * Rx DCA Control Register:
+ * 00-15 : 0x02200 + n*4
+ * 16-64 : 0x0100C + n*0x40
+ * 64-127: 0x0D00C + (n-64)*0x40
+ */
+#define IXGBE_DCA_RXCTRL(_i)    (((_i) <= 15) ? (0x02200 + ((_i) * 4)) : \
+				 (((_i) < 64) ? (0x0100C + ((_i) * 0x40)) : \
+				 (0x0D00C + (((_i) - 64) * 0x40))))
+#define IXGBE_RDRXCTL           0x02F00
+#define IXGBE_RXPBSIZE(_i)      (0x03C00 + ((_i) * 4))
+					     /* 8 of these 0x03C00 - 0x03C1C */
+#define IXGBE_RXCTRL    0x03000
+#define IXGBE_DROPEN    0x03D04
+#define IXGBE_RXPBSIZE_SHIFT 10
+
+/* Receive Registers */
+#define IXGBE_RXCSUM    0x05000
+#define IXGBE_RFCTL     0x05008
+#define IXGBE_DRECCCTL  0x02F08
+#define IXGBE_DRECCCTL_DISABLE 0
+/* Multicast Table Array - 128 entries */
+#define IXGBE_MTA(_i)   (0x05200 + ((_i) * 4))
+#define IXGBE_RAL(_i)   (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+			 (0x0A200 + ((_i) * 8)))
+#define IXGBE_RAH(_i)   (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+			 (0x0A204 + ((_i) * 8)))
+#define IXGBE_MPSAR_LO(_i) (0x0A600 + ((_i) * 8))
+#define IXGBE_MPSAR_HI(_i) (0x0A604 + ((_i) * 8))
+/* Packet split receive type */
+#define IXGBE_PSRTYPE(_i)    (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : \
+			      (0x0EA00 + ((_i) * 4)))
+/* array of 4096 1-bit vlan filters */
+#define IXGBE_VFTA(_i)  (0x0A000 + ((_i) * 4))
+/*array of 4096 4-bit vlan vmdq indices */
+#define IXGBE_VFTAVIND(_j, _i)  (0x0A200 + ((_j) * 0x200) + ((_i) * 4))
+#define IXGBE_FCTRL     0x05080
+#define IXGBE_VLNCTRL   0x05088
+#define IXGBE_MCSTCTRL  0x05090
+#define IXGBE_MRQC      0x05818
+#define IXGBE_SAQF(_i)  (0x0E000 + ((_i) * 4)) /* Source Address Queue Filter */
+#define IXGBE_DAQF(_i)  (0x0E200 + ((_i) * 4)) /* Dest. Address Queue Filter */
+#define IXGBE_SDPQF(_i) (0x0E400 + ((_i) * 4)) /* Src Dest. Addr Queue Filter */
+#define IXGBE_FTQF(_i)  (0x0E600 + ((_i) * 4)) /* Five Tuple Queue Filter */
+#define IXGBE_ETQF(_i)  (0x05128 + ((_i) * 4)) /* EType Queue Filter */
+#define IXGBE_ETQS(_i)  (0x0EC00 + ((_i) * 4)) /* EType Queue Select */
+#define IXGBE_SYNQF     0x0EC30 /* SYN Packet Queue Filter */
+#define IXGBE_RQTC      0x0EC70
+#define IXGBE_MTQC      0x08120
+#define IXGBE_VLVF(_i)  (0x0F100 + ((_i) * 4))  /* 64 of these (0-63) */
+#define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4))  /* 128 of these (0-127) */
+#define IXGBE_VMVIR(_i) (0x08000 + ((_i) * 4))  /* 64 of these (0-63) */
+#define IXGBE_PFFLPL	0x050B0
+#define IXGBE_PFFLPH	0x050B4
+#define IXGBE_VT_CTL         0x051B0
+#define IXGBE_PFMAILBOX(_i)  (0x04B00 + (4 * (_i))) /* 64 total */
+#define IXGBE_PFMBMEM(_i)    (0x13000 + (64 * (_i))) /* 64 Mailboxes, 16 DW each */
+#define IXGBE_PFMBICR(_i)    (0x00710 + (4 * (_i))) /* 4 total */
+#define IXGBE_PFMBIMR(_i)    (0x00720 + (4 * (_i))) /* 4 total */
+#define IXGBE_VFRE(_i)       (0x051E0 + ((_i) * 4))
+#define IXGBE_VFTE(_i)       (0x08110 + ((_i) * 4))
+#define IXGBE_VMECM(_i)      (0x08790 + ((_i) * 4))
+#define IXGBE_QDE            0x2F04
+#define IXGBE_VMTXSW(_i)     (0x05180 + ((_i) * 4)) /* 2 total */
+#define IXGBE_VMOLR(_i)      (0x0F000 + ((_i) * 4)) /* 64 total */
+#define IXGBE_UTA(_i)        (0x0F400 + ((_i) * 4))
+#define IXGBE_MRCTL(_i)      (0x0F600 + ((_i) * 4))
+#define IXGBE_VMRVLAN(_i)    (0x0F610 + ((_i) * 4))
+#define IXGBE_VMRVM(_i)      (0x0F630 + ((_i) * 4))
+#define IXGBE_L34T_IMIR(_i)  (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
+#define IXGBE_RXFECCERR0         0x051B8
+#define IXGBE_LLITHRESH 0x0EC90
+#define IXGBE_IMIR(_i)  (0x05A80 + ((_i) * 4))  /* 8 of these (0-7) */
+#define IXGBE_IMIREXT(_i)       (0x05AA0 + ((_i) * 4))  /* 8 of these (0-7) */
+#define IXGBE_IMIRVP    0x05AC0
+#define IXGBE_VMD_CTL   0x0581C
+#define IXGBE_RETA(_i)  (0x05C00 + ((_i) * 4))  /* 32 of these (0-31) */
+#define IXGBE_ERETA(_i)	(0x0EE80 + ((_i) * 4))  /* 96 of these (0-95) */
+#define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4))  /* 10 of these (0-9) */
+
+/* Registers for setting up RSS on X550 with SRIOV
+ * _p - pool number (0..63)
+ * _i - index (0..10 for PFVFRSSRK, 0..15 for PFVFRETA)
+ */
+#define IXGBE_PFVFMRQC(_p)	(0x03400 + ((_p) * 4))
+#define IXGBE_PFVFRSSRK(_i, _p)	(0x018000 + ((_i) * 4) + ((_p) * 0x40))
+#define IXGBE_PFVFRETA(_i, _p)	(0x019000 + ((_i) * 4) + ((_p) * 0x40))
+
+/* Flow Director registers */
+#define IXGBE_FDIRCTRL  0x0EE00
+#define IXGBE_FDIRHKEY  0x0EE68
+#define IXGBE_FDIRSKEY  0x0EE6C
+#define IXGBE_FDIRDIP4M 0x0EE3C
+#define IXGBE_FDIRSIP4M 0x0EE40
+#define IXGBE_FDIRTCPM  0x0EE44
+#define IXGBE_FDIRUDPM  0x0EE48
+#define IXGBE_FDIRIP6M  0x0EE74
+#define IXGBE_FDIRM     0x0EE70
+
+/* Flow Director Stats registers */
+#define IXGBE_FDIRFREE  0x0EE38
+#define IXGBE_FDIRLEN   0x0EE4C
+#define IXGBE_FDIRUSTAT 0x0EE50
+#define IXGBE_FDIRFSTAT 0x0EE54
+#define IXGBE_FDIRMATCH 0x0EE58
+#define IXGBE_FDIRMISS  0x0EE5C
+
+/* Flow Director Programming registers */
+#define IXGBE_FDIRSIPv6(_i) (0x0EE0C + ((_i) * 4)) /* 3 of these (0-2) */
+#define IXGBE_FDIRIPSA      0x0EE18
+#define IXGBE_FDIRIPDA      0x0EE1C
+#define IXGBE_FDIRPORT      0x0EE20
+#define IXGBE_FDIRVLAN      0x0EE24
+#define IXGBE_FDIRHASH      0x0EE28
+#define IXGBE_FDIRCMD       0x0EE2C
+
+/* Transmit DMA registers */
+#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of these (0-31)*/
+#define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40))
+#define IXGBE_TDLEN(_i) (0x06008 + ((_i) * 0x40))
+#define IXGBE_TDH(_i)   (0x06010 + ((_i) * 0x40))
+#define IXGBE_TDT(_i)   (0x06018 + ((_i) * 0x40))
+#define IXGBE_TXDCTL(_i) (0x06028 + ((_i) * 0x40))
+#define IXGBE_TDWBAL(_i) (0x06038 + ((_i) * 0x40))
+#define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40))
+#define IXGBE_DTXCTL    0x07E00
+
+#define IXGBE_DMATXCTL      0x04A80
+#define IXGBE_PFVFSPOOF(_i) (0x08200 + ((_i) * 4)) /* 8 of these 0 - 7 */
+#define IXGBE_PFDTXGSWC     0x08220
+#define IXGBE_DTXMXSZRQ     0x08100
+#define IXGBE_DTXTCPFLGL    0x04A88
+#define IXGBE_DTXTCPFLGH    0x04A8C
+#define IXGBE_LBDRPEN       0x0CA00
+#define IXGBE_TXPBTHRESH(_i) (0x04950 + ((_i) * 4)) /* 8 of these 0 - 7 */
+
+#define IXGBE_DMATXCTL_TE       0x1 /* Transmit Enable */
+#define IXGBE_DMATXCTL_NS       0x2 /* No Snoop LSO hdr buffer */
+#define IXGBE_DMATXCTL_GDV      0x8 /* Global Double VLAN */
+#define IXGBE_DMATXCTL_VT_SHIFT 16  /* VLAN EtherType */
+
+#define IXGBE_PFDTXGSWC_VT_LBEN 0x1 /* Local L2 VT switch enable */
+
+/* Anti-spoofing defines */
+#define IXGBE_SPOOF_MACAS_MASK          0xFF
+#define IXGBE_SPOOF_VLANAS_MASK         0xFF00
+#define IXGBE_SPOOF_VLANAS_SHIFT        8
+#define IXGBE_SPOOF_ETHERTYPEAS		0xFF000000
+#define IXGBE_SPOOF_ETHERTYPEAS_SHIFT	16
+#define IXGBE_PFVFSPOOF_REG_COUNT       8
+
+#define IXGBE_DCA_TXCTRL(_i)    (0x07200 + ((_i) * 4)) /* 16 of these (0-15) */
+/* Tx DCA Control register : 128 of these (0-127) */
+#define IXGBE_DCA_TXCTRL_82599(_i)  (0x0600C + ((_i) * 0x40))
+#define IXGBE_TIPG      0x0CB00
+#define IXGBE_TXPBSIZE(_i)      (0x0CC00 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_MNGTXMAP  0x0CD10
+#define IXGBE_TIPG_FIBER_DEFAULT 3
+#define IXGBE_TXPBSIZE_SHIFT    10
+
+/* Wake up registers */
+#define IXGBE_WUC       0x05800
+#define IXGBE_WUFC      0x05808
+#define IXGBE_WUS       0x05810
+#define IXGBE_IPAV      0x05838
+#define IXGBE_IP4AT     0x05840 /* IPv4 table 0x5840-0x5858 */
+#define IXGBE_IP6AT     0x05880 /* IPv6 table 0x5880-0x588F */
+
+#define IXGBE_WUPL      0x05900
+#define IXGBE_WUPM      0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */
+#define IXGBE_VXLANCTRL	0x0000507C /* Rx filter VXLAN UDPPORT Register */
+#define IXGBE_FHFT(_n)	(0x09000 + ((_n) * 0x100)) /* Flex host filter table */
+#define IXGBE_FHFT_EXT(_n)	(0x09800 + ((_n) * 0x100)) /* Ext Flexible Host
+							    * Filter Table */
+
+#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX         4
+#define IXGBE_EXT_FLEXIBLE_FILTER_COUNT_MAX     2
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define IXGBE_FLEXIBLE_FILTER_SIZE_MAX  128
+#define IXGBE_FHFT_LENGTH_OFFSET        0xFC  /* Length byte in FHFT */
+#define IXGBE_FHFT_LENGTH_MASK          0x0FF /* Length in lower byte */
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define IXGBE_WUC_PME_EN     0x00000002 /* PME Enable */
+#define IXGBE_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define IXGBE_WUC_WKEN       0x00000010 /* Enable PE_WAKE_N pin assertion  */
+
+/* Wake Up Filter Control */
+#define IXGBE_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define IXGBE_WUFC_MAG  0x00000002 /* Magic Packet Wakeup Enable */
+#define IXGBE_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */
+#define IXGBE_WUFC_MC   0x00000008 /* Directed Multicast Wakeup Enable */
+#define IXGBE_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
+#define IXGBE_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */
+#define IXGBE_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define IXGBE_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define IXGBE_WUFC_MNG  0x00000100 /* Directed Mgmt Packet Wakeup Enable */
+
+#define IXGBE_WUFC_IGNORE_TCO   0x00008000 /* Ignore WakeOn TCO packets */
+#define IXGBE_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define IXGBE_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define IXGBE_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define IXGBE_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define IXGBE_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */
+#define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */
+#define IXGBE_WUFC_FLX_FILTERS     0x000F0000 /* Mask for 4 flex filters */
+#define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000 /* Mask for Ext. flex filters */
+#define IXGBE_WUFC_ALL_FILTERS     0x003F00FF /* Mask for all wakeup filters */
+#define IXGBE_WUFC_FLX_OFFSET      16 /* Offset to the Flexible Filters bits */
+
+/* Wake Up Status */
+#define IXGBE_WUS_LNKC  IXGBE_WUFC_LNKC
+#define IXGBE_WUS_MAG   IXGBE_WUFC_MAG
+#define IXGBE_WUS_EX    IXGBE_WUFC_EX
+#define IXGBE_WUS_MC    IXGBE_WUFC_MC
+#define IXGBE_WUS_BC    IXGBE_WUFC_BC
+#define IXGBE_WUS_ARP   IXGBE_WUFC_ARP
+#define IXGBE_WUS_IPV4  IXGBE_WUFC_IPV4
+#define IXGBE_WUS_IPV6  IXGBE_WUFC_IPV6
+#define IXGBE_WUS_MNG   IXGBE_WUFC_MNG
+#define IXGBE_WUS_FLX0  IXGBE_WUFC_FLX0
+#define IXGBE_WUS_FLX1  IXGBE_WUFC_FLX1
+#define IXGBE_WUS_FLX2  IXGBE_WUFC_FLX2
+#define IXGBE_WUS_FLX3  IXGBE_WUFC_FLX3
+#define IXGBE_WUS_FLX4  IXGBE_WUFC_FLX4
+#define IXGBE_WUS_FLX5  IXGBE_WUFC_FLX5
+#define IXGBE_WUS_FLX_FILTERS  IXGBE_WUFC_FLX_FILTERS
+
+/* Wake Up Packet Length */
+#define IXGBE_WUPL_LENGTH_MASK 0xFFFF
+
+/* DCB registers */
+#define MAX_TRAFFIC_CLASS        8
+#define X540_TRAFFIC_CLASS       4
+#define IXGBE_RMCS      0x03D00
+#define IXGBE_DPMCS     0x07F40
+#define IXGBE_PDPMCS    0x0CD00
+#define IXGBE_RUPPBMR   0x050A0
+#define IXGBE_RT2CR(_i) (0x03C20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RT2SR(_i) (0x03C40 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TDTQ2TCCR(_i)     (0x0602C + ((_i) * 0x40)) /* 8 of these (0-7) */
+#define IXGBE_TDTQ2TCSR(_i)     (0x0622C + ((_i) * 0x40)) /* 8 of these (0-7) */
+#define IXGBE_TDPT2TCCR(_i)     (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TDPT2TCSR(_i)     (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+
+
+/* Security Control Registers */
+#define IXGBE_SECTXCTRL         0x08800
+#define IXGBE_SECTXSTAT         0x08804
+#define IXGBE_SECTXBUFFAF       0x08808
+#define IXGBE_SECTXMINIFG       0x08810
+#define IXGBE_SECRXCTRL         0x08D00
+#define IXGBE_SECRXSTAT         0x08D04
+
+/* Security Bit Fields and Masks */
+#define IXGBE_SECTXCTRL_SECTX_DIS       0x00000001
+#define IXGBE_SECTXCTRL_TX_DIS          0x00000002
+#define IXGBE_SECTXCTRL_STORE_FORWARD   0x00000004
+
+#define IXGBE_SECTXSTAT_SECTX_RDY       0x00000001
+#define IXGBE_SECTXSTAT_ECC_TXERR       0x00000002
+
+#define IXGBE_SECRXCTRL_SECRX_DIS       0x00000001
+#define IXGBE_SECRXCTRL_RX_DIS          0x00000002
+
+#define IXGBE_SECRXSTAT_SECRX_RDY       0x00000001
+#define IXGBE_SECRXSTAT_ECC_RXERR       0x00000002
+
+/* LinkSec (MacSec) Registers */
+#define IXGBE_LSECTXCAP         0x08A00
+#define IXGBE_LSECRXCAP         0x08F00
+#define IXGBE_LSECTXCTRL        0x08A04
+#define IXGBE_LSECTXSCL         0x08A08 /* SCI Low */
+#define IXGBE_LSECTXSCH         0x08A0C /* SCI High */
+#define IXGBE_LSECTXSA          0x08A10
+#define IXGBE_LSECTXPN0         0x08A14
+#define IXGBE_LSECTXPN1         0x08A18
+#define IXGBE_LSECTXKEY0(_n)    (0x08A1C + (4 * (_n))) /* 4 of these (0-3) */
+#define IXGBE_LSECTXKEY1(_n)    (0x08A2C + (4 * (_n))) /* 4 of these (0-3) */
+#define IXGBE_LSECRXCTRL        0x08F04
+#define IXGBE_LSECRXSCL         0x08F08
+#define IXGBE_LSECRXSCH         0x08F0C
+#define IXGBE_LSECRXSA(_i)      (0x08F10 + (4 * (_i))) /* 2 of these (0-1) */
+#define IXGBE_LSECRXPN(_i)      (0x08F18 + (4 * (_i))) /* 2 of these (0-1) */
+#define IXGBE_LSECRXKEY(_n, _m) (0x08F20 + ((0x10 * (_n)) + (4 * (_m))))
+#define IXGBE_LSECTXUT          0x08A3C /* OutPktsUntagged */
+#define IXGBE_LSECTXPKTE        0x08A40 /* OutPktsEncrypted */
+#define IXGBE_LSECTXPKTP        0x08A44 /* OutPktsProtected */
+#define IXGBE_LSECTXOCTE        0x08A48 /* OutOctetsEncrypted */
+#define IXGBE_LSECTXOCTP        0x08A4C /* OutOctetsProtected */
+#define IXGBE_LSECRXUT          0x08F40 /* InPktsUntagged/InPktsNoTag */
+#define IXGBE_LSECRXOCTD        0x08F44 /* InOctetsDecrypted */
+#define IXGBE_LSECRXOCTV        0x08F48 /* InOctetsValidated */
+#define IXGBE_LSECRXBAD         0x08F4C /* InPktsBadTag */
+#define IXGBE_LSECRXNOSCI       0x08F50 /* InPktsNoSci */
+#define IXGBE_LSECRXUNSCI       0x08F54 /* InPktsUnknownSci */
+#define IXGBE_LSECRXUNCH        0x08F58 /* InPktsUnchecked */
+#define IXGBE_LSECRXDELAY       0x08F5C /* InPktsDelayed */
+#define IXGBE_LSECRXLATE        0x08F60 /* InPktsLate */
+#define IXGBE_LSECRXOK(_n)      (0x08F64 + (0x04 * (_n))) /* InPktsOk */
+#define IXGBE_LSECRXINV(_n)     (0x08F6C + (0x04 * (_n))) /* InPktsInvalid */
+#define IXGBE_LSECRXNV(_n)      (0x08F74 + (0x04 * (_n))) /* InPktsNotValid */
+#define IXGBE_LSECRXUNSA        0x08F7C /* InPktsUnusedSa */
+#define IXGBE_LSECRXNUSA        0x08F80 /* InPktsNotUsingSa */
+
+/* LinkSec (MacSec) Bit Fields and Masks */
+#define IXGBE_LSECTXCAP_SUM_MASK        0x00FF0000
+#define IXGBE_LSECTXCAP_SUM_SHIFT       16
+#define IXGBE_LSECRXCAP_SUM_MASK        0x00FF0000
+#define IXGBE_LSECRXCAP_SUM_SHIFT       16
+
+#define IXGBE_LSECTXCTRL_EN_MASK        0x00000003
+#define IXGBE_LSECTXCTRL_DISABLE        0x0
+#define IXGBE_LSECTXCTRL_AUTH           0x1
+#define IXGBE_LSECTXCTRL_AUTH_ENCRYPT   0x2
+#define IXGBE_LSECTXCTRL_AISCI          0x00000020
+#define IXGBE_LSECTXCTRL_PNTHRSH_MASK   0xFFFFFF00
+#define IXGBE_LSECTXCTRL_RSV_MASK       0x000000D8
+
+#define IXGBE_LSECRXCTRL_EN_MASK        0x0000000C
+#define IXGBE_LSECRXCTRL_EN_SHIFT       2
+#define IXGBE_LSECRXCTRL_DISABLE        0x0
+#define IXGBE_LSECRXCTRL_CHECK          0x1
+#define IXGBE_LSECRXCTRL_STRICT         0x2
+#define IXGBE_LSECRXCTRL_DROP           0x3
+#define IXGBE_LSECRXCTRL_PLSH           0x00000040
+#define IXGBE_LSECRXCTRL_RP             0x00000080
+#define IXGBE_LSECRXCTRL_RSV_MASK       0xFFFFFF33
+
+/* IpSec Registers */
+#define IXGBE_IPSTXIDX          0x08900
+#define IXGBE_IPSTXSALT         0x08904
+#define IXGBE_IPSTXKEY(_i)      (0x08908 + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXIDX          0x08E00
+#define IXGBE_IPSRXIPADDR(_i)   (0x08E04 + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXSPI          0x08E14
+#define IXGBE_IPSRXIPIDX        0x08E18
+#define IXGBE_IPSRXKEY(_i)      (0x08E1C + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXSALT         0x08E2C
+#define IXGBE_IPSRXMOD          0x08E30
+
+#define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE    0x4
+
+/* DCB registers */
+#define IXGBE_RTRPCS      0x02430
+#define IXGBE_RTTDCS      0x04900
+#define IXGBE_RTTDCS_ARBDIS     0x00000040 /* DCB arbiter disable */
+#define IXGBE_RTTPCS      0x0CD00
+#define IXGBE_RTRUP2TC    0x03020
+#define IXGBE_RTTUP2TC    0x0C800
+#define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TXLLQ(_i)   (0x082E0 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTPT2C(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTPT2S(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDQSEL    0x04904
+#define IXGBE_RTTDT1C     0x04908
+#define IXGBE_RTTDT1S     0x0490C
+#define IXGBE_RTTQCNCR    0x08B00
+#define IXGBE_RTTQCNTG    0x04A90
+#define IXGBE_RTTBCNRD    0x0498C
+#define IXGBE_RTTQCNRR    0x0498C
+#define IXGBE_RTTDTECC    0x04990
+#define IXGBE_RTTDTECC_NO_BCN   0x00000100
+#define IXGBE_RTTBCNRC    0x04984
+#define IXGBE_RTTBCNRC_RS_ENA	0x80000000
+#define IXGBE_RTTBCNRC_RF_DEC_MASK	0x00003FFF
+#define IXGBE_RTTBCNRC_RF_INT_SHIFT	14
+#define IXGBE_RTTBCNRC_RF_INT_MASK	\
+	(IXGBE_RTTBCNRC_RF_DEC_MASK << IXGBE_RTTBCNRC_RF_INT_SHIFT)
+#define IXGBE_RTTBCNRM    0x04980
+#define IXGBE_RTTQCNRM    0x04980
+
+/* FCoE Direct DMA Context */
+#define IXGBE_FCDDC(_i, _j)	(0x20000 + ((_i) * 0x4) + ((_j) * 0x10))
+/* FCoE DMA Context Registers */
+#define IXGBE_FCPTRL    0x02410 /* FC User Desc. PTR Low */
+#define IXGBE_FCPTRH    0x02414 /* FC USer Desc. PTR High */
+#define IXGBE_FCBUFF    0x02418 /* FC Buffer Control */
+#define IXGBE_FCDMARW   0x02420 /* FC Receive DMA RW */
+#define IXGBE_FCINVST0  0x03FC0 /* FC Invalid DMA Context Status Reg 0 */
+#define IXGBE_FCINVST(_i)       (IXGBE_FCINVST0 + ((_i) * 4))
+#define IXGBE_FCBUFF_VALID      (1 << 0)   /* DMA Context Valid */
+#define IXGBE_FCBUFF_BUFFSIZE   (3 << 3)   /* User Buffer Size */
+#define IXGBE_FCBUFF_WRCONTX    (1 << 7)   /* 0: Initiator, 1: Target */
+#define IXGBE_FCBUFF_BUFFCNT    0x0000ff00 /* Number of User Buffers */
+#define IXGBE_FCBUFF_OFFSET     0xffff0000 /* User Buffer Offset */
+#define IXGBE_FCBUFF_BUFFSIZE_SHIFT  3
+#define IXGBE_FCBUFF_BUFFCNT_SHIFT   8
+#define IXGBE_FCBUFF_OFFSET_SHIFT    16
+#define IXGBE_FCDMARW_WE        (1 << 14)   /* Write enable */
+#define IXGBE_FCDMARW_RE        (1 << 15)   /* Read enable */
+#define IXGBE_FCDMARW_FCOESEL   0x000001ff  /* FC X_ID: 11 bits */
+#define IXGBE_FCDMARW_LASTSIZE  0xffff0000  /* Last User Buffer Size */
+#define IXGBE_FCDMARW_LASTSIZE_SHIFT 16
+
+/* FCoE SOF/EOF */
+#define IXGBE_TEOFF     0x04A94 /* Tx FC EOF */
+#define IXGBE_TSOFF     0x04A98 /* Tx FC SOF */
+#define IXGBE_REOFF     0x05158 /* Rx FC EOF */
+#define IXGBE_RSOFF     0x051F8 /* Rx FC SOF */
+/* FCoE Direct Filter Context */
+#define IXGBE_FCDFC(_i, _j)	(0x28000 + ((_i) * 0x4) + ((_j) * 0x10))
+#define IXGBE_FCDFCD(_i)	(0x30000 + ((_i) * 0x4))
+/* FCoE Filter Context Registers */
+#define IXGBE_FCFLT     0x05108 /* FC FLT Context */
+#define IXGBE_FCFLTRW   0x05110 /* FC Filter RW Control */
+#define IXGBE_FCPARAM   0x051d8 /* FC Offset Parameter */
+#define IXGBE_FCFLT_VALID       (1 << 0)   /* Filter Context Valid */
+#define IXGBE_FCFLT_FIRST       (1 << 1)   /* Filter First */
+#define IXGBE_FCFLT_SEQID       0x00ff0000 /* Sequence ID */
+#define IXGBE_FCFLT_SEQCNT      0xff000000 /* Sequence Count */
+#define IXGBE_FCFLTRW_RVALDT    (1 << 13)  /* Fast Re-Validation */
+#define IXGBE_FCFLTRW_WE        (1 << 14)  /* Write Enable */
+#define IXGBE_FCFLTRW_RE        (1 << 15)  /* Read Enable */
+/* FCoE Receive Control */
+#define IXGBE_FCRXCTRL  0x05100 /* FC Receive Control */
+#define IXGBE_FCRXCTRL_FCOELLI  (1 << 0)   /* Low latency interrupt */
+#define IXGBE_FCRXCTRL_SAVBAD   (1 << 1)   /* Save Bad Frames */
+#define IXGBE_FCRXCTRL_FRSTRDH  (1 << 2)   /* EN 1st Read Header */
+#define IXGBE_FCRXCTRL_LASTSEQH (1 << 3)   /* EN Last Header in Seq */
+#define IXGBE_FCRXCTRL_ALLH     (1 << 4)   /* EN All Headers */
+#define IXGBE_FCRXCTRL_FRSTSEQH (1 << 5)   /* EN 1st Seq. Header */
+#define IXGBE_FCRXCTRL_ICRC     (1 << 6)   /* Ignore Bad FC CRC */
+#define IXGBE_FCRXCTRL_FCCRCBO  (1 << 7)   /* FC CRC Byte Ordering */
+#define IXGBE_FCRXCTRL_FCOEVER  0x00000f00 /* FCoE Version: 4 bits */
+#define IXGBE_FCRXCTRL_FCOEVER_SHIFT 8
+/* FCoE Redirection */
+#define IXGBE_FCRECTL   0x0ED00 /* FC Redirection Control */
+#define IXGBE_FCRETA0   0x0ED10 /* FC Redirection Table 0 */
+#define IXGBE_FCRETA(_i)        (IXGBE_FCRETA0 + ((_i) * 4)) /* FCoE Redir */
+#define IXGBE_FCRECTL_ENA       0x1        /* FCoE Redir Table Enable */
+#define IXGBE_FCRETA_SIZE       8          /* Max entries in FCRETA */
+#define IXGBE_FCRETA_ENTRY_MASK 0x0000007f /* 7 bits for the queue index */
+#define IXGBE_FCRETA_SIZE_X550	32 /* Max entries in FCRETA */
+/* Higher 7 bits for the queue index */
+#define IXGBE_FCRETA_ENTRY_HIGH_MASK	0x007F0000
+#define IXGBE_FCRETA_ENTRY_HIGH_SHIFT	16
+
+/* Stats registers */
+#define IXGBE_CRCERRS   0x04000
+#define IXGBE_ILLERRC   0x04004
+#define IXGBE_ERRBC     0x04008
+#define IXGBE_MSPDC     0x04010
+#define IXGBE_MPC(_i)   (0x03FA0 + ((_i) * 4)) /* 8 of these 3FA0-3FBC*/
+#define IXGBE_MLFC      0x04034
+#define IXGBE_MRFC      0x04038
+#define IXGBE_RLEC      0x04040
+#define IXGBE_LXONTXC   0x03F60
+#define IXGBE_LXONRXC   0x0CF60
+#define IXGBE_LXOFFTXC  0x03F68
+#define IXGBE_LXOFFRXC  0x0CF68
+#define IXGBE_LXONRXCNT 0x041A4
+#define IXGBE_LXOFFRXCNT 0x041A8
+#define IXGBE_PXONRXCNT(_i)     (0x04140 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXOFFRXCNT(_i)    (0x04160 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXON2OFFCNT(_i)   (0x03240 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXONTXC(_i)       (0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/
+#define IXGBE_PXONRXC(_i)       (0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/
+#define IXGBE_PXOFFTXC(_i)      (0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/
+#define IXGBE_PXOFFRXC(_i)      (0x0CF20 + ((_i) * 4)) /* 8 of these CF20-CF3C*/
+#define IXGBE_PRC64     0x0405C
+#define IXGBE_PRC127    0x04060
+#define IXGBE_PRC255    0x04064
+#define IXGBE_PRC511    0x04068
+#define IXGBE_PRC1023   0x0406C
+#define IXGBE_PRC1522   0x04070
+#define IXGBE_GPRC      0x04074
+#define IXGBE_BPRC      0x04078
+#define IXGBE_MPRC      0x0407C
+#define IXGBE_GPTC      0x04080
+#define IXGBE_GORCL     0x04088
+#define IXGBE_GORCH     0x0408C
+#define IXGBE_GOTCL     0x04090
+#define IXGBE_GOTCH     0x04094
+#define IXGBE_RNBC(_i)  (0x03FC0 + ((_i) * 4)) /* 8 of these 3FC0-3FDC*/
+#define IXGBE_RUC       0x040A4
+#define IXGBE_RFC       0x040A8
+#define IXGBE_ROC       0x040AC
+#define IXGBE_RJC       0x040B0
+#define IXGBE_MNGPRC    0x040B4
+#define IXGBE_MNGPDC    0x040B8
+#define IXGBE_MNGPTC    0x0CF90
+#define IXGBE_TORL      0x040C0
+#define IXGBE_TORH      0x040C4
+#define IXGBE_TPR       0x040D0
+#define IXGBE_TPT       0x040D4
+#define IXGBE_PTC64     0x040D8
+#define IXGBE_PTC127    0x040DC
+#define IXGBE_PTC255    0x040E0
+#define IXGBE_PTC511    0x040E4
+#define IXGBE_PTC1023   0x040E8
+#define IXGBE_PTC1522   0x040EC
+#define IXGBE_MPTC      0x040F0
+#define IXGBE_BPTC      0x040F4
+#define IXGBE_XEC       0x04120
+#define IXGBE_SSVPC     0x08780
+
+#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4))
+#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : \
+			 (0x08600 + ((_i) * 4)))
+#define IXGBE_TQSM(_i)  (0x08600 + ((_i) * 4))
+
+#define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBTC(_i) (0x06034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC_L(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC_H(_i) (0x01038 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QPRDC(_i) (0x01430 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBTC_L(_i) (0x08700 + ((_i) * 0x8)) /* 16 of these */
+#define IXGBE_QBTC_H(_i) (0x08704 + ((_i) * 0x8)) /* 16 of these */
+#define IXGBE_FCCRC     0x05118 /* Count of Good Eth CRC w/ Bad FC CRC */
+#define IXGBE_FCOERPDC  0x0241C /* FCoE Rx Packets Dropped Count */
+#define IXGBE_FCLAST    0x02424 /* FCoE Last Error Count */
+#define IXGBE_FCOEPRC   0x02428 /* Number of FCoE Packets Received */
+#define IXGBE_FCOEDWRC  0x0242C /* Number of FCoE DWords Received */
+#define IXGBE_FCOEPTC   0x08784 /* Number of FCoE Packets Transmitted */
+#define IXGBE_FCOEDWTC  0x08788 /* Number of FCoE DWords Transmitted */
+#define IXGBE_O2BGPTC   0x041C4
+#define IXGBE_O2BSPC    0x087B0
+#define IXGBE_B2OSPC    0x041C0
+#define IXGBE_B2OGPRC   0x02F90
+#define IXGBE_PCRC8ECL  0x0E810
+#define IXGBE_PCRC8ECH  0x0E811
+#define IXGBE_PCRC8ECH_MASK     0x1F
+#define IXGBE_LDPCECL   0x0E820
+#define IXGBE_LDPCECH   0x0E821
+
+/* MII clause 22/28 definitions */
+#define IXGBE_MDIO_PHY_LOW_POWER_MODE	0x0800
+
+#define IXGBE_MDIO_XENPAK_LASI_STATUS	0x9005 /* XENPAK LASI Status register */
+#define IXGBE_XENPAK_LASI_LINK_STATUS_ALARM 0x1 /* Link Status Alarm change */
+
+#define IXGBE_MDIO_AUTO_NEG_LINK_STATUS	0x4 /* Indicates if link is up */
+
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK	0x7 /* Speed/Duplex Mask */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_HALF 0x0 /* 10Mb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_FULL 0x1 /* 10Mb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_HALF 0x2 /* 100Mb/s H Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_FULL 0x3 /* 100Mb/s F Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_HALF 0x4 /* 1Gb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL 0x5 /* 1Gb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_HALF 0x6 /* 10Gb/s Half Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL 0x7 /* 10Gb/s Full Duplex */
+
+/* Management */
+#define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MFUTP(_i) (0x05030 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MANC      0x05820
+#define IXGBE_MFVAL     0x05824
+#define IXGBE_MANC2H    0x05860
+#define IXGBE_MDEF(_i)  (0x05890 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MIPAF     0x058B0
+#define IXGBE_MMAL(_i)  (0x05910 + ((_i) * 8)) /* 4 of these (0-3) */
+#define IXGBE_MMAH(_i)  (0x05914 + ((_i) * 8)) /* 4 of these (0-3) */
+#define IXGBE_FTFT      0x09400 /* 0x9400-0x97FC */
+#define IXGBE_METF(_i)  (0x05190 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_MDEF_EXT(_i) (0x05160 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_LSWFW     0x15014
+
+/* Management Bit Fields and Masks */
+#define IXGBE_MANC_RCV_TCO_EN	0x00020000 /* Rcv TCO packet enable */
+
+/* Firmware Semaphore Register */
+#define IXGBE_FWSM_MODE_MASK	0xE
+#define IXGBE_FWSM_FW_MODE_PT	0x4
+
+/* ARC Subsystem registers */
+#define IXGBE_HICR      0x15F00
+#define IXGBE_FWSTS     0x15F0C
+#define IXGBE_HSMC0R    0x15F04
+#define IXGBE_HSMC1R    0x15F08
+#define IXGBE_SWSR      0x15F10
+#define IXGBE_HFDR      0x15FE8
+#define IXGBE_FLEX_MNG  0x15800 /* 0x15800 - 0x15EFC */
+
+#define IXGBE_HICR_EN              0x01  /* Enable bit - RO */
+/* Driver sets this bit when done to put command in RAM */
+#define IXGBE_HICR_C               0x02
+#define IXGBE_HICR_SV              0x04  /* Status Validity */
+#define IXGBE_HICR_FW_RESET_ENABLE 0x40
+#define IXGBE_HICR_FW_RESET        0x80
+
+/* PCI-E registers */
+#define IXGBE_GCR       0x11000
+#define IXGBE_GTV       0x11004
+#define IXGBE_FUNCTAG   0x11008
+#define IXGBE_GLT       0x1100C
+#define IXGBE_GSCL_1    0x11010
+#define IXGBE_GSCL_2    0x11014
+#define IXGBE_GSCL_3    0x11018
+#define IXGBE_GSCL_4    0x1101C
+#define IXGBE_GSCN_0    0x11020
+#define IXGBE_GSCN_1    0x11024
+#define IXGBE_GSCN_2    0x11028
+#define IXGBE_GSCN_3    0x1102C
+#define IXGBE_FACTPS    0x10150
+#define IXGBE_PCIEANACTL  0x11040
+#define IXGBE_SWSM      0x10140
+#define IXGBE_FWSM      0x10148
+#define IXGBE_GSSR      0x10160
+#define IXGBE_MREVID    0x11064
+#define IXGBE_DCA_ID    0x11070
+#define IXGBE_DCA_CTRL  0x11074
+#define IXGBE_SWFW_SYNC IXGBE_GSSR
+
+/* PCIe registers 82599-specific */
+#define IXGBE_GCR_EXT           0x11050
+#define IXGBE_GSCL_5_82599      0x11030
+#define IXGBE_GSCL_6_82599      0x11034
+#define IXGBE_GSCL_7_82599      0x11038
+#define IXGBE_GSCL_8_82599      0x1103C
+#define IXGBE_PHYADR_82599      0x11040
+#define IXGBE_PHYDAT_82599      0x11044
+#define IXGBE_PHYCTL_82599      0x11048
+#define IXGBE_PBACLR_82599      0x11068
+#define IXGBE_CIAA_82599        0x11088
+#define IXGBE_CIAD_82599        0x1108C
+#define IXGBE_CIAA_X550         0x11508
+#define IXGBE_CIAD_X550         0x11510
+#define IXGBE_CIAA_BY_MAC(_hw)  ((((_hw)->mac.type >= ixgbe_mac_X550) ? \
+				IXGBE_CIAA_X550 : IXGBE_CIAA_82599))
+#define IXGBE_CIAD_BY_MAC(_hw)  ((((_hw)->mac.type >= ixgbe_mac_X550) ? \
+				IXGBE_CIAD_X550 : IXGBE_CIAD_82599))
+#define IXGBE_PICAUSE           0x110B0
+#define IXGBE_PIENA             0x110B8
+#define IXGBE_CDQ_MBR_82599     0x110B4
+#define IXGBE_PCIESPARE         0x110BC
+#define IXGBE_MISC_REG_82599    0x110F0
+#define IXGBE_ECC_CTRL_0_82599  0x11100
+#define IXGBE_ECC_CTRL_1_82599  0x11104
+#define IXGBE_ECC_STATUS_82599  0x110E0
+#define IXGBE_BAR_CTRL_82599    0x110F4
+
+/* PCI Express Control */
+#define IXGBE_GCR_CMPL_TMOUT_MASK       0x0000F000
+#define IXGBE_GCR_CMPL_TMOUT_10ms       0x00001000
+#define IXGBE_GCR_CMPL_TMOUT_RESEND     0x00010000
+#define IXGBE_GCR_CAP_VER2              0x00040000
+
+#define IXGBE_GCR_EXT_MSIX_EN           0x80000000
+#define IXGBE_GCR_EXT_BUFFERS_CLEAR     0x40000000
+#define IXGBE_GCR_EXT_VT_MODE_16        0x00000001
+#define IXGBE_GCR_EXT_VT_MODE_32        0x00000002
+#define IXGBE_GCR_EXT_VT_MODE_64        0x00000003
+#define IXGBE_GCR_EXT_SRIOV             (IXGBE_GCR_EXT_MSIX_EN | \
+					 IXGBE_GCR_EXT_VT_MODE_64)
+
+/* Time Sync Registers */
+#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
+#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
+#define IXGBE_RXSTMPL    0x051E8 /* Rx timestamp Low - RO */
+#define IXGBE_RXSTMPH    0x051A4 /* Rx timestamp High - RO */
+#define IXGBE_RXSATRL    0x051A0 /* Rx timestamp attribute low - RO */
+#define IXGBE_RXSATRH    0x051A8 /* Rx timestamp attribute high - RO */
+#define IXGBE_RXMTRL     0x05120 /* RX message type register low - RW */
+#define IXGBE_TXSTMPL    0x08C04 /* Tx timestamp value Low - RO */
+#define IXGBE_TXSTMPH    0x08C08 /* Tx timestamp value High - RO */
+#define IXGBE_SYSTIML    0x08C0C /* System time register Low - RO */
+#define IXGBE_SYSTIMH    0x08C10 /* System time register High - RO */
+#define IXGBE_TIMINCA    0x08C14 /* Increment attributes register - RW */
+#define IXGBE_TIMADJL    0x08C18 /* Time Adjustment Offset register Low - RW */
+#define IXGBE_TIMADJH    0x08C1C /* Time Adjustment Offset register High - RW */
+#define IXGBE_TSAUXC     0x08C20 /* TimeSync Auxiliary Control register - RW */
+#define IXGBE_TRGTTIML0  0x08C24 /* Target Time Register 0 Low - RW */
+#define IXGBE_TRGTTIMH0  0x08C28 /* Target Time Register 0 High - RW */
+#define IXGBE_TRGTTIML1  0x08C2C /* Target Time Register 1 Low - RW */
+#define IXGBE_TRGTTIMH1  0x08C30 /* Target Time Register 1 High - RW */
+#define IXGBE_CLKTIML    0x08C34 /* Clock Out Time Register Low - RW */
+#define IXGBE_CLKTIMH    0x08C38 /* Clock Out Time Register High - RW */
+#define IXGBE_FREQOUT0   0x08C34 /* Frequency Out 0 Control register - RW */
+#define IXGBE_FREQOUT1   0x08C38 /* Frequency Out 1 Control register - RW */
+#define IXGBE_AUXSTMPL0  0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */
+#define IXGBE_AUXSTMPH0  0x08C40 /* Auxiliary Time Stamp 0 register High - RO */
+#define IXGBE_AUXSTMPL1  0x08C44 /* Auxiliary Time Stamp 1 register Low - RO */
+#define IXGBE_AUXSTMPH1  0x08C48 /* Auxiliary Time Stamp 1 register High - RO */
+
+/* Diagnostic Registers */
+#define IXGBE_RDSTATCTL   0x02C20
+#define IXGBE_RDSTAT(_i)  (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */
+#define IXGBE_RDHMPN      0x02F08
+#define IXGBE_RIC_DW(_i)  (0x02F10 + ((_i) * 4))
+#define IXGBE_RDPROBE     0x02F20
+#define IXGBE_RDMAM       0x02F30
+#define IXGBE_RDMAD       0x02F34
+#define IXGBE_TDSTATCTL   0x07C20
+#define IXGBE_TDSTAT(_i)  (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */
+#define IXGBE_TDHMPN      0x07F08
+#define IXGBE_TDHMPN2     0x082FC
+#define IXGBE_TXDESCIC    0x082CC
+#define IXGBE_TIC_DW(_i)  (0x07F10 + ((_i) * 4))
+#define IXGBE_TIC_DW2(_i) (0x082B0 + ((_i) * 4))
+#define IXGBE_TDPROBE     0x07F20
+#define IXGBE_TXBUFCTRL   0x0C600
+#define IXGBE_TXBUFDATA0  0x0C610
+#define IXGBE_TXBUFDATA1  0x0C614
+#define IXGBE_TXBUFDATA2  0x0C618
+#define IXGBE_TXBUFDATA3  0x0C61C
+#define IXGBE_RXBUFCTRL   0x03600
+#define IXGBE_RXBUFDATA0  0x03610
+#define IXGBE_RXBUFDATA1  0x03614
+#define IXGBE_RXBUFDATA2  0x03618
+#define IXGBE_RXBUFDATA3  0x0361C
+#define IXGBE_PCIE_DIAG(_i)     (0x11090 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_RFVAL     0x050A4
+#define IXGBE_MDFTC1    0x042B8
+#define IXGBE_MDFTC2    0x042C0
+#define IXGBE_MDFTFIFO1 0x042C4
+#define IXGBE_MDFTFIFO2 0x042C8
+#define IXGBE_MDFTS     0x042CC
+#define IXGBE_RXDATAWRPTR(_i)   (0x03700 + ((_i) * 4)) /* 8 of these 3700-370C*/
+#define IXGBE_RXDESCWRPTR(_i)   (0x03710 + ((_i) * 4)) /* 8 of these 3710-371C*/
+#define IXGBE_RXDATARDPTR(_i)   (0x03720 + ((_i) * 4)) /* 8 of these 3720-372C*/
+#define IXGBE_RXDESCRDPTR(_i)   (0x03730 + ((_i) * 4)) /* 8 of these 3730-373C*/
+#define IXGBE_TXDATAWRPTR(_i)   (0x0C700 + ((_i) * 4)) /* 8 of these C700-C70C*/
+#define IXGBE_TXDESCWRPTR(_i)   (0x0C710 + ((_i) * 4)) /* 8 of these C710-C71C*/
+#define IXGBE_TXDATARDPTR(_i)   (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/
+#define IXGBE_TXDESCRDPTR(_i)   (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/
+#define IXGBE_PCIEECCCTL 0x1106C
+#define IXGBE_RXWRPTR(_i)       (0x03100 + ((_i) * 4)) /* 8 of these 3100-310C*/
+#define IXGBE_RXUSED(_i)        (0x03120 + ((_i) * 4)) /* 8 of these 3120-312C*/
+#define IXGBE_RXRDPTR(_i)       (0x03140 + ((_i) * 4)) /* 8 of these 3140-314C*/
+#define IXGBE_RXRDWRPTR(_i)     (0x03160 + ((_i) * 4)) /* 8 of these 3160-310C*/
+#define IXGBE_TXWRPTR(_i)       (0x0C100 + ((_i) * 4)) /* 8 of these C100-C10C*/
+#define IXGBE_TXUSED(_i)        (0x0C120 + ((_i) * 4)) /* 8 of these C120-C12C*/
+#define IXGBE_TXRDPTR(_i)       (0x0C140 + ((_i) * 4)) /* 8 of these C140-C14C*/
+#define IXGBE_TXRDWRPTR(_i)     (0x0C160 + ((_i) * 4)) /* 8 of these C160-C10C*/
+#define IXGBE_PCIEECCCTL0 0x11100
+#define IXGBE_PCIEECCCTL1 0x11104
+#define IXGBE_RXDBUECC  0x03F70
+#define IXGBE_TXDBUECC  0x0CF70
+#define IXGBE_RXDBUEST 0x03F74
+#define IXGBE_TXDBUEST 0x0CF74
+#define IXGBE_PBTXECC   0x0C300
+#define IXGBE_PBRXECC   0x03300
+#define IXGBE_GHECCR    0x110B0
+
+/* MAC Registers */
+#define IXGBE_PCS1GCFIG 0x04200
+#define IXGBE_PCS1GLCTL 0x04208
+#define IXGBE_PCS1GLSTA 0x0420C
+#define IXGBE_PCS1GDBG0 0x04210
+#define IXGBE_PCS1GDBG1 0x04214
+#define IXGBE_PCS1GANA  0x04218
+#define IXGBE_PCS1GANLP 0x0421C
+#define IXGBE_PCS1GANNP 0x04220
+#define IXGBE_PCS1GANLPNP 0x04224
+#define IXGBE_HLREG0    0x04240
+#define IXGBE_HLREG1    0x04244
+#define IXGBE_PAP       0x04248
+#define IXGBE_MACA      0x0424C
+#define IXGBE_APAE      0x04250
+#define IXGBE_ARD       0x04254
+#define IXGBE_AIS       0x04258
+#define IXGBE_MSCA      0x0425C
+#define IXGBE_MSRWD     0x04260
+#define IXGBE_MLADD     0x04264
+#define IXGBE_MHADD     0x04268
+#define IXGBE_MAXFRS    0x04268
+#define IXGBE_TREG      0x0426C
+#define IXGBE_PCSS1     0x04288
+#define IXGBE_PCSS2     0x0428C
+#define IXGBE_XPCSS     0x04290
+#define IXGBE_MFLCN     0x04294
+#define IXGBE_SERDESC   0x04298
+#define IXGBE_MACS      0x0429C
+#define IXGBE_AUTOC     0x042A0
+#define IXGBE_LINKS     0x042A4
+#define IXGBE_LINKS2    0x04324
+#define IXGBE_AUTOC2    0x042A8
+#define IXGBE_AUTOC3    0x042AC
+#define IXGBE_ANLP1     0x042B0
+#define IXGBE_ANLP2     0x042B4
+#define IXGBE_MACC      0x04330
+#define IXGBE_ATLASCTL  0x04800
+#define IXGBE_MMNGC     0x042D0
+#define IXGBE_ANLPNP1   0x042D4
+#define IXGBE_ANLPNP2   0x042D8
+#define IXGBE_KRPCSFC   0x042E0
+#define IXGBE_KRPCSS    0x042E4
+#define IXGBE_FECS1     0x042E8
+#define IXGBE_FECS2     0x042EC
+#define IXGBE_SMADARCTL 0x14F10
+#define IXGBE_MPVC      0x04318
+#define IXGBE_SGMIIC    0x04314
+
+/* Statistics Registers */
+#define IXGBE_RXNFGPC      0x041B0
+#define IXGBE_RXNFGBCL     0x041B4
+#define IXGBE_RXNFGBCH     0x041B8
+#define IXGBE_RXDGPC       0x02F50
+#define IXGBE_RXDGBCL      0x02F54
+#define IXGBE_RXDGBCH      0x02F58
+#define IXGBE_RXDDGPC      0x02F5C
+#define IXGBE_RXDDGBCL     0x02F60
+#define IXGBE_RXDDGBCH     0x02F64
+#define IXGBE_RXLPBKGPC    0x02F68
+#define IXGBE_RXLPBKGBCL   0x02F6C
+#define IXGBE_RXLPBKGBCH   0x02F70
+#define IXGBE_RXDLPBKGPC   0x02F74
+#define IXGBE_RXDLPBKGBCL  0x02F78
+#define IXGBE_RXDLPBKGBCH  0x02F7C
+#define IXGBE_TXDGPC       0x087A0
+#define IXGBE_TXDGBCL      0x087A4
+#define IXGBE_TXDGBCH      0x087A8
+
+#define IXGBE_RXDSTATCTRL 0x02F40
+
+/* Copper Pond 2 link timeout */
+#define IXGBE_VALIDATE_LINK_READY_TIMEOUT 50
+
+/* Omer CORECTL */
+#define IXGBE_CORECTL           0x014F00
+/* BARCTRL */
+#define IXGBE_BARCTRL               0x110F4
+#define IXGBE_BARCTRL_FLSIZE        0x0700
+#define IXGBE_BARCTRL_FLSIZE_SHIFT  8
+#define IXGBE_BARCTRL_CSRSIZE       0x2000
+
+/* RSCCTL Bit Masks */
+#define IXGBE_RSCCTL_RSCEN          0x01
+#define IXGBE_RSCCTL_MAXDESC_1      0x00
+#define IXGBE_RSCCTL_MAXDESC_4      0x04
+#define IXGBE_RSCCTL_MAXDESC_8      0x08
+#define IXGBE_RSCCTL_MAXDESC_16     0x0C
+
+/* RSCDBU Bit Masks */
+#define IXGBE_RSCDBU_RSCSMALDIS_MASK    0x0000007F
+#define IXGBE_RSCDBU_RSCACKDIS          0x00000080
+
+/* RDRXCTL Bit Masks */
+#define IXGBE_RDRXCTL_RDMTS_1_2     0x00000000 /* Rx Desc Min Threshold Size */
+#define IXGBE_RDRXCTL_CRCSTRIP      0x00000002 /* CRC Strip */
+#define IXGBE_RDRXCTL_MVMEN         0x00000020
+#define IXGBE_RDRXCTL_DMAIDONE      0x00000008 /* DMA init cycle done */
+#define IXGBE_RDRXCTL_AGGDIS        0x00010000 /* Aggregation disable */
+#define IXGBE_RDRXCTL_RSCFRSTSIZE   0x003E0000 /* RSC First packet size */
+#define IXGBE_RDRXCTL_RSCLLIDIS     0x00800000 /* Disable RSC compl on LLI */
+#define IXGBE_RDRXCTL_RSCACKC       0x02000000 /* must set 1 when RSC enabled */
+#define IXGBE_RDRXCTL_FCOE_WRFIX    0x04000000 /* must set 1 when RSC enabled */
+
+/* RQTC Bit Masks and Shifts */
+#define IXGBE_RQTC_SHIFT_TC(_i)     ((_i) * 4)
+#define IXGBE_RQTC_TC0_MASK         (0x7 << 0)
+#define IXGBE_RQTC_TC1_MASK         (0x7 << 4)
+#define IXGBE_RQTC_TC2_MASK         (0x7 << 8)
+#define IXGBE_RQTC_TC3_MASK         (0x7 << 12)
+#define IXGBE_RQTC_TC4_MASK         (0x7 << 16)
+#define IXGBE_RQTC_TC5_MASK         (0x7 << 20)
+#define IXGBE_RQTC_TC6_MASK         (0x7 << 24)
+#define IXGBE_RQTC_TC7_MASK         (0x7 << 28)
+
+/* PSRTYPE.RQPL Bit masks and shift */
+#define IXGBE_PSRTYPE_RQPL_MASK     0x7
+#define IXGBE_PSRTYPE_RQPL_SHIFT    29
+
+/* CTRL Bit Masks */
+#define IXGBE_CTRL_GIO_DIS      0x00000004 /* Global IO Master Disable bit */
+#define IXGBE_CTRL_LNK_RST      0x00000008 /* Link Reset. Resets everything. */
+#define IXGBE_CTRL_RST          0x04000000 /* Reset (SW) */
+#define IXGBE_CTRL_RST_MASK     (IXGBE_CTRL_LNK_RST | IXGBE_CTRL_RST)
+
+/* FACTPS */
+#define IXGBE_FACTPS_MNGCG      0x20000000 /* Manageblility Clock Gated */
+#define IXGBE_FACTPS_LFS        0x40000000 /* LAN Function Select */
+
+/* MHADD Bit Masks */
+#define IXGBE_MHADD_MFS_MASK    0xFFFF0000
+#define IXGBE_MHADD_MFS_SHIFT   16
+
+/* Extended Device Control */
+#define IXGBE_CTRL_EXT_PFRSTD   0x00004000 /* Physical Function Reset Done */
+#define IXGBE_CTRL_EXT_NS_DIS   0x00010000 /* No Snoop disable */
+#define IXGBE_CTRL_EXT_RO_DIS   0x00020000 /* Relaxed Ordering disable */
+#define IXGBE_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+
+/* Direct Cache Access (DCA) definitions */
+#define IXGBE_DCA_CTRL_DCA_ENABLE  0x00000000 /* DCA Enable */
+#define IXGBE_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */
+
+#define IXGBE_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */
+#define IXGBE_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */
+
+#define IXGBE_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
+#define IXGBE_DCA_RXCTRL_CPUID_MASK_82599  0xFF000000 /* Rx CPUID Mask */
+#define IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599 24 /* Rx CPUID Shift */
+#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
+#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
+#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DATA_WRO_EN (1 << 13) /* Rx wr data Relax Order */
+#define IXGBE_DCA_RXCTRL_HEAD_WRO_EN (1 << 15) /* Rx wr header RO */
+
+#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
+#define IXGBE_DCA_TXCTRL_CPUID_MASK_82599  0xFF000000 /* Tx CPUID Mask */
+#define IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599 24 /* Tx CPUID Shift */
+#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
+#define IXGBE_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */
+#define IXGBE_DCA_TXCTRL_DESC_WRO_EN (1 << 11) /* Tx Desc writeback RO bit */
+#define IXGBE_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */
+#define IXGBE_DCA_MAX_QUEUES_82598   16 /* DCA regs only on 16 queues */
+
+/* MSCA Bit Masks */
+#define IXGBE_MSCA_NP_ADDR_MASK      0x0000FFFF /* MDI Address (new protocol) */
+#define IXGBE_MSCA_NP_ADDR_SHIFT     0
+#define IXGBE_MSCA_DEV_TYPE_MASK     0x001F0000 /* Device Type (new protocol) */
+#define IXGBE_MSCA_DEV_TYPE_SHIFT    16 /* Register Address (old protocol */
+#define IXGBE_MSCA_PHY_ADDR_MASK     0x03E00000 /* PHY Address mask */
+#define IXGBE_MSCA_PHY_ADDR_SHIFT    21 /* PHY Address shift*/
+#define IXGBE_MSCA_OP_CODE_MASK      0x0C000000 /* OP CODE mask */
+#define IXGBE_MSCA_OP_CODE_SHIFT     26 /* OP CODE shift */
+#define IXGBE_MSCA_ADDR_CYCLE        0x00000000 /* OP CODE 00 (addr cycle) */
+#define IXGBE_MSCA_WRITE             0x04000000 /* OP CODE 01 (write) */
+#define IXGBE_MSCA_READ              0x0C000000 /* OP CODE 11 (read) */
+#define IXGBE_MSCA_READ_AUTOINC      0x08000000 /* OP CODE 10 (read, auto inc)*/
+#define IXGBE_MSCA_ST_CODE_MASK      0x30000000 /* ST Code mask */
+#define IXGBE_MSCA_ST_CODE_SHIFT     28 /* ST Code shift */
+#define IXGBE_MSCA_NEW_PROTOCOL      0x00000000 /* ST CODE 00 (new protocol) */
+#define IXGBE_MSCA_OLD_PROTOCOL      0x10000000 /* ST CODE 01 (old protocol) */
+#define IXGBE_MSCA_MDI_COMMAND       0x40000000 /* Initiate MDI command */
+#define IXGBE_MSCA_MDI_IN_PROG_EN    0x80000000 /* MDI in progress enable */
+
+/* MSRWD bit masks */
+#define IXGBE_MSRWD_WRITE_DATA_MASK     0x0000FFFF
+#define IXGBE_MSRWD_WRITE_DATA_SHIFT    0
+#define IXGBE_MSRWD_READ_DATA_MASK      0xFFFF0000
+#define IXGBE_MSRWD_READ_DATA_SHIFT     16
+
+/* Atlas registers */
+#define IXGBE_ATLAS_PDN_LPBK    0x24
+#define IXGBE_ATLAS_PDN_10G     0xB
+#define IXGBE_ATLAS_PDN_1G      0xC
+#define IXGBE_ATLAS_PDN_AN      0xD
+
+/* Atlas bit masks */
+#define IXGBE_ATLASCTL_WRITE_CMD        0x00010000
+#define IXGBE_ATLAS_PDN_TX_REG_EN       0x10
+#define IXGBE_ATLAS_PDN_TX_10G_QL_ALL   0xF0
+#define IXGBE_ATLAS_PDN_TX_1G_QL_ALL    0xF0
+#define IXGBE_ATLAS_PDN_TX_AN_QL_ALL    0xF0
+
+/* Omer bit masks */
+#define IXGBE_CORECTL_WRITE_CMD         0x00010000
+
+/* MDIO definitions */
+
+#define IXGBE_MDIO_PMA_PMD_DEV_TYPE		0x1
+#define IXGBE_MDIO_PCS_DEV_TYPE		0x3
+#define IXGBE_MDIO_PHY_XS_DEV_TYPE		0x4
+#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE		0x7
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE	0x1E   /* Device 30 */
+#define IXGBE_TWINAX_DEV			1
+
+#define IXGBE_MDIO_COMMAND_TIMEOUT     100 /* PHY Timeout for 1 GB mode */
+
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL      0x0    /* VS1 Control Reg */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS       0x1    /* VS1 Status Reg */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS  0x0008 /* 1 = Link Up */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0 - 10G, 1 - 1G */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED    0x0018
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED     0x0010
+
+#define IXGBE_MDIO_AUTO_NEG_CONTROL	0x0 /* AUTO_NEG Control Reg */
+#define IXGBE_MDIO_AUTO_NEG_STATUS	0x1 /* AUTO_NEG Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT	0xC800 /* AUTO_NEG Vendor Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_ADVT	0x10 /* AUTO_NEG Advt Reg */
+#define IXGBE_MDIO_AUTO_NEG_LP		0x13 /* AUTO_NEG LP Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_EEE_ADVT	0x3C /* AUTO_NEG EEE Advt Reg */
+
+#define IXGBE_MDIO_TX_VENDOR_ALARMS_3	0xCC02 /* Vendor Alarms 3 Reg */
+#define IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK 0x3 /* PHY Reset Complete Mask */
+#define IXGBE_MDIO_GLOBAL_RES_PR_10 0xC479 /* Global Resv Provisioning 10 Reg */
+#define IXGBE_MDIO_POWER_UP_STALL	0x8000 /* Power Up Stall */
+
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR	0xC30A /* PHY_XS SDA/SCL Addr Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA	0xC30B /* PHY_XS SDA/SCL Data Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT	0xC30C /* PHY_XS SDA/SCL Stat Reg */
+#define IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR	0x9 /* Standard Tx Dis Reg */
+#define IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE	0x0001 /* PMD Global Tx Dis */
+
+/* MII clause 22/28 definitions */
+#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */
+#define IXGBE_MII_AUTONEG_XNP_TX_REG             0x17   /* 1G XNP Transmit */
+#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX      0x4000 /* full duplex, bit:14*/
+#define IXGBE_MII_1GBASE_T_ADVERTISE             0x8000 /* full duplex, bit:15*/
+#define IXGBE_MII_AUTONEG_REG                    0x0
+
+#define IXGBE_PHY_REVISION_MASK        0xFFFFFFF0
+#define IXGBE_MAX_PHY_ADDR             32
+
+/* PHY IDs*/
+#define TN1010_PHY_ID    0x00A19410
+#define TNX_FW_REV       0xB
+#define X540_PHY_ID      0x01540200
+#define QT2022_PHY_ID    0x0043A400
+#define ATH_PHY_ID       0x03429050
+#define AQ_FW_REV        0x20
+
+/* PHY Types */
+#define IXGBE_M88E1145_E_PHY_ID  0x01410CD0
+
+/* Special PHY Init Routine */
+#define IXGBE_PHY_INIT_OFFSET_NL 0x002B
+#define IXGBE_PHY_INIT_END_NL    0xFFFF
+#define IXGBE_CONTROL_MASK_NL    0xF000
+#define IXGBE_DATA_MASK_NL       0x0FFF
+#define IXGBE_CONTROL_SHIFT_NL   12
+#define IXGBE_DELAY_NL           0
+#define IXGBE_DATA_NL            1
+#define IXGBE_CONTROL_NL         0x000F
+#define IXGBE_CONTROL_EOL_NL     0x0FFF
+#define IXGBE_CONTROL_SOL_NL     0x0000
+
+/* General purpose Interrupt Enable */
+#define IXGBE_SDP0_GPIEN         0x00000001 /* SDP0 */
+#define IXGBE_SDP1_GPIEN         0x00000002 /* SDP1 */
+#define IXGBE_SDP2_GPIEN         0x00000004 /* SDP2 */
+#define IXGBE_GPIE_MSIX_MODE     0x00000010 /* MSI-X mode */
+#define IXGBE_GPIE_OCD           0x00000020 /* Other Clear Disable */
+#define IXGBE_GPIE_EIMEN         0x00000040 /* Immediate Interrupt Enable */
+#define IXGBE_GPIE_EIAME         0x40000000
+#define IXGBE_GPIE_PBA_SUPPORT   0x80000000
+#define IXGBE_GPIE_RSC_DELAY_SHIFT 11
+#define IXGBE_GPIE_VTMODE_MASK   0x0000C000 /* VT Mode Mask */
+#define IXGBE_GPIE_VTMODE_16     0x00004000 /* 16 VFs 8 queues per VF */
+#define IXGBE_GPIE_VTMODE_32     0x00008000 /* 32 VFs 4 queues per VF */
+#define IXGBE_GPIE_VTMODE_64     0x0000C000 /* 64 VFs 2 queues per VF */
+
+/* Packet Buffer Initialization */
+#define IXGBE_TXPBSIZE_20KB     0x00005000 /* 20KB Packet Buffer */
+#define IXGBE_TXPBSIZE_40KB     0x0000A000 /* 40KB Packet Buffer */
+#define IXGBE_RXPBSIZE_48KB     0x0000C000 /* 48KB Packet Buffer */
+#define IXGBE_RXPBSIZE_64KB     0x00010000 /* 64KB Packet Buffer */
+#define IXGBE_RXPBSIZE_80KB     0x00014000 /* 80KB Packet Buffer */
+#define IXGBE_RXPBSIZE_128KB    0x00020000 /* 128KB Packet Buffer */
+#define IXGBE_RXPBSIZE_MAX      0x00080000 /* 512KB Packet Buffer*/
+#define IXGBE_TXPBSIZE_MAX      0x00028000 /* 160KB Packet Buffer*/
+
+#define IXGBE_TXPKT_SIZE_MAX    0xA        /* Max Tx Packet size  */
+#define IXGBE_MAX_PB		8
+
+/* Packet buffer allocation strategies */
+enum {
+	PBA_STRATEGY_EQUAL	= 0,	/* Distribute PB space equally */
+#define PBA_STRATEGY_EQUAL	PBA_STRATEGY_EQUAL
+	PBA_STRATEGY_WEIGHTED	= 1,	/* Weight front half of TCs */
+#define PBA_STRATEGY_WEIGHTED	PBA_STRATEGY_WEIGHTED
+};
+
+/* Transmit Flow Control status */
+#define IXGBE_TFCS_TXOFF         0x00000001
+#define IXGBE_TFCS_TXOFF0        0x00000100
+#define IXGBE_TFCS_TXOFF1        0x00000200
+#define IXGBE_TFCS_TXOFF2        0x00000400
+#define IXGBE_TFCS_TXOFF3        0x00000800
+#define IXGBE_TFCS_TXOFF4        0x00001000
+#define IXGBE_TFCS_TXOFF5        0x00002000
+#define IXGBE_TFCS_TXOFF6        0x00004000
+#define IXGBE_TFCS_TXOFF7        0x00008000
+
+/* TCP Timer */
+#define IXGBE_TCPTIMER_KS            0x00000100
+#define IXGBE_TCPTIMER_COUNT_ENABLE  0x00000200
+#define IXGBE_TCPTIMER_COUNT_FINISH  0x00000400
+#define IXGBE_TCPTIMER_LOOP          0x00000800
+#define IXGBE_TCPTIMER_DURATION_MASK 0x000000FF
+
+/* HLREG0 Bit Masks */
+#define IXGBE_HLREG0_TXCRCEN      0x00000001   /* bit  0 */
+#define IXGBE_HLREG0_RXCRCSTRP    0x00000002   /* bit  1 */
+#define IXGBE_HLREG0_JUMBOEN      0x00000004   /* bit  2 */
+#define IXGBE_HLREG0_TXPADEN      0x00000400   /* bit 10 */
+#define IXGBE_HLREG0_TXPAUSEEN    0x00001000   /* bit 12 */
+#define IXGBE_HLREG0_RXPAUSEEN    0x00004000   /* bit 14 */
+#define IXGBE_HLREG0_LPBK         0x00008000   /* bit 15 */
+#define IXGBE_HLREG0_MDCSPD       0x00010000   /* bit 16 */
+#define IXGBE_HLREG0_CONTMDC      0x00020000   /* bit 17 */
+#define IXGBE_HLREG0_CTRLFLTR     0x00040000   /* bit 18 */
+#define IXGBE_HLREG0_PREPEND      0x00F00000   /* bits 20-23 */
+#define IXGBE_HLREG0_PRIPAUSEEN   0x01000000   /* bit 24 */
+#define IXGBE_HLREG0_RXPAUSERECDA 0x06000000   /* bits 25-26 */
+#define IXGBE_HLREG0_RXLNGTHERREN 0x08000000   /* bit 27 */
+#define IXGBE_HLREG0_RXPADSTRIPEN 0x10000000   /* bit 28 */
+
+/* VMD_CTL bitmasks */
+#define IXGBE_VMD_CTL_VMDQ_EN     0x00000001
+#define IXGBE_VMD_CTL_VMDQ_FILTER 0x00000002
+
+/* VT_CTL bitmasks */
+#define IXGBE_VT_CTL_DIS_DEFPL  0x20000000 /* disable default pool */
+#define IXGBE_VT_CTL_REPLEN     0x40000000 /* replication enabled */
+#define IXGBE_VT_CTL_VT_ENABLE  0x00000001  /* Enable VT Mode */
+#define IXGBE_VT_CTL_POOL_SHIFT 7
+#define IXGBE_VT_CTL_POOL_MASK  (0x3F << IXGBE_VT_CTL_POOL_SHIFT)
+
+/* VMOLR bitmasks */
+#define IXGBE_VMOLR_AUPE        0x01000000 /* accept untagged packets */
+#define IXGBE_VMOLR_ROMPE       0x02000000 /* accept packets in MTA tbl */
+#define IXGBE_VMOLR_ROPE        0x04000000 /* accept packets in UC tbl */
+#define IXGBE_VMOLR_BAM         0x08000000 /* accept broadcast packets */
+#define IXGBE_VMOLR_MPE         0x10000000 /* multicast promiscuous */
+
+/* VFRE bitmask */
+#define IXGBE_VFRE_ENABLE_ALL   0xFFFFFFFF
+
+#define IXGBE_VF_INIT_TIMEOUT   200 /* Number of retries to clear RSTI */
+
+/* RDHMPN and TDHMPN bitmasks */
+#define IXGBE_RDHMPN_RDICADDR       0x007FF800
+#define IXGBE_RDHMPN_RDICRDREQ      0x00800000
+#define IXGBE_RDHMPN_RDICADDR_SHIFT 11
+#define IXGBE_TDHMPN_TDICADDR       0x003FF800
+#define IXGBE_TDHMPN_TDICRDREQ      0x00800000
+#define IXGBE_TDHMPN_TDICADDR_SHIFT 11
+
+#define IXGBE_RDMAM_MEM_SEL_SHIFT   13
+#define IXGBE_RDMAM_DWORD_SHIFT     9
+#define IXGBE_RDMAM_DESC_COMP_FIFO  1
+#define IXGBE_RDMAM_DFC_CMD_FIFO    2
+#define IXGBE_RDMAM_TCN_STATUS_RAM  4
+#define IXGBE_RDMAM_WB_COLL_FIFO    5
+#define IXGBE_RDMAM_QSC_CNT_RAM     6
+#define IXGBE_RDMAM_QSC_QUEUE_CNT   8
+#define IXGBE_RDMAM_QSC_QUEUE_RAM   0xA
+#define IXGBE_RDMAM_DESC_COM_FIFO_RANGE     135
+#define IXGBE_RDMAM_DESC_COM_FIFO_COUNT     4
+#define IXGBE_RDMAM_DFC_CMD_FIFO_RANGE      48
+#define IXGBE_RDMAM_DFC_CMD_FIFO_COUNT      7
+#define IXGBE_RDMAM_TCN_STATUS_RAM_RANGE    256
+#define IXGBE_RDMAM_TCN_STATUS_RAM_COUNT    9
+#define IXGBE_RDMAM_WB_COLL_FIFO_RANGE      8
+#define IXGBE_RDMAM_WB_COLL_FIFO_COUNT      4
+#define IXGBE_RDMAM_QSC_CNT_RAM_RANGE       64
+#define IXGBE_RDMAM_QSC_CNT_RAM_COUNT       4
+#define IXGBE_RDMAM_QSC_QUEUE_CNT_RANGE     32
+#define IXGBE_RDMAM_QSC_QUEUE_CNT_COUNT     4
+#define IXGBE_RDMAM_QSC_QUEUE_RAM_RANGE     128
+#define IXGBE_RDMAM_QSC_QUEUE_RAM_COUNT     8
+
+#define IXGBE_TXDESCIC_READY        0x80000000
+
+/* Receive Checksum Control */
+#define IXGBE_RXCSUM_IPPCSE     0x00001000   /* IP payload checksum enable */
+#define IXGBE_RXCSUM_PCSD       0x00002000   /* packet checksum disabled */
+
+/* FCRTL Bit Masks */
+#define IXGBE_FCRTL_XONE        0x80000000  /* XON enable */
+#define IXGBE_FCRTH_FCEN        0x80000000  /* Packet buffer fc enable */
+
+/* PAP bit masks*/
+#define IXGBE_PAP_TXPAUSECNT_MASK   0x0000FFFF /* Pause counter mask */
+
+/* RMCS Bit Masks */
+#define IXGBE_RMCS_RRM          0x00000002 /* Receive Recycle Mode enable */
+/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
+#define IXGBE_RMCS_RAC          0x00000004
+#define IXGBE_RMCS_DFP          IXGBE_RMCS_RAC /* Deficit Fixed Priority ena */
+#define IXGBE_RMCS_TFCE_802_3X         0x00000008 /* Tx Priority FC ena */
+#define IXGBE_RMCS_TFCE_PRIORITY       0x00000010 /* Tx Priority FC ena */
+#define IXGBE_RMCS_ARBDIS       0x00000040 /* Arbitration disable bit */
+
+/* FCCFG Bit Masks */
+#define IXGBE_FCCFG_TFCE_802_3X         0x00000008 /* Tx link FC enable */
+#define IXGBE_FCCFG_TFCE_PRIORITY       0x00000010 /* Tx priority FC enable */
+
+/* Interrupt register bitmasks */
+
+/* Extended Interrupt Cause Read */
+#define IXGBE_EICR_RTX_QUEUE    0x0000FFFF /* RTx Queue Interrupt */
+#define IXGBE_EICR_FLOW_DIR     0x00010000 /* FDir Exception */
+#define IXGBE_EICR_RX_MISS      0x00020000 /* Packet Buffer Overrun */
+#define IXGBE_EICR_PCI          0x00040000 /* PCI Exception */
+#define IXGBE_EICR_MAILBOX      0x00080000 /* VF to PF Mailbox Interrupt */
+#define IXGBE_EICR_LSC          0x00100000 /* Link Status Change */
+#define IXGBE_EICR_LINKSEC      0x00200000 /* PN Threshold */
+#define IXGBE_EICR_MNG          0x00400000 /* Manageability Event Interrupt */
+#define IXGBE_EICR_TS           0x00800000 /* Thermal Sensor Event */
+#define IXGBE_EICR_TIMESYNC     0x01000000 /* Timesync Event */
+#define IXGBE_EICR_GPI_SDP0     0x01000000 /* Gen Purpose Interrupt on SDP0 */
+#define IXGBE_EICR_GPI_SDP1     0x02000000 /* Gen Purpose Interrupt on SDP1 */
+#define IXGBE_EICR_GPI_SDP2     0x04000000 /* Gen Purpose Interrupt on SDP2 */
+#define IXGBE_EICR_ECC          0x10000000 /* ECC Error */
+#define IXGBE_EICR_PBUR         0x10000000 /* Packet Buffer Handler Error */
+#define IXGBE_EICR_DHER         0x20000000 /* Descriptor Handler Error */
+#define IXGBE_EICR_TCP_TIMER    0x40000000 /* TCP Timer */
+#define IXGBE_EICR_OTHER        0x80000000 /* Interrupt Cause Active */
+
+/* Extended Interrupt Cause Set */
+#define IXGBE_EICS_RTX_QUEUE    IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EICS_FLOW_DIR     IXGBE_EICR_FLOW_DIR  /* FDir Exception */
+#define IXGBE_EICS_RX_MISS      IXGBE_EICR_RX_MISS   /* Pkt Buffer Overrun */
+#define IXGBE_EICS_PCI          IXGBE_EICR_PCI       /* PCI Exception */
+#define IXGBE_EICS_MAILBOX      IXGBE_EICR_MAILBOX   /* VF to PF Mailbox Int */
+#define IXGBE_EICS_LSC          IXGBE_EICR_LSC       /* Link Status Change */
+#define IXGBE_EICS_MNG          IXGBE_EICR_MNG       /* MNG Event Interrupt */
+#define IXGBE_EICS_TIMESYNC     IXGBE_EICR_TIMESYNC  /* Timesync Event */
+#define IXGBE_EICS_GPI_SDP0     IXGBE_EICR_GPI_SDP0  /* SDP0 Gen Purpose Int */
+#define IXGBE_EICS_GPI_SDP1     IXGBE_EICR_GPI_SDP1  /* SDP1 Gen Purpose Int */
+#define IXGBE_EICS_GPI_SDP2     IXGBE_EICR_GPI_SDP2  /* SDP2 Gen Purpose Int */
+#define IXGBE_EICS_ECC          IXGBE_EICR_ECC       /* ECC Error */
+#define IXGBE_EICS_PBUR         IXGBE_EICR_PBUR      /* Pkt Buf Handler Err */
+#define IXGBE_EICS_DHER         IXGBE_EICR_DHER      /* Desc Handler Error */
+#define IXGBE_EICS_TCP_TIMER    IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EICS_OTHER        IXGBE_EICR_OTHER     /* INT Cause Active */
+
+/* Extended Interrupt Mask Set */
+#define IXGBE_EIMS_RTX_QUEUE    IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMS_FLOW_DIR     IXGBE_EICR_FLOW_DIR  /* FDir Exception */
+#define IXGBE_EIMS_RX_MISS      IXGBE_EICR_RX_MISS   /* Packet Buffer Overrun */
+#define IXGBE_EIMS_PCI          IXGBE_EICR_PCI       /* PCI Exception */
+#define IXGBE_EIMS_MAILBOX      IXGBE_EICR_MAILBOX   /* VF to PF Mailbox Int */
+#define IXGBE_EIMS_LSC          IXGBE_EICR_LSC       /* Link Status Change */
+#define IXGBE_EIMS_MNG          IXGBE_EICR_MNG       /* MNG Event Interrupt */
+#define IXGBE_EIMS_TS           IXGBE_EICR_TS        /* Thermel Sensor Event */
+#define IXGBE_EIMS_TIMESYNC     IXGBE_EICR_TIMESYNC  /* Timesync Event */
+#define IXGBE_EIMS_GPI_SDP0     IXGBE_EICR_GPI_SDP0  /* SDP0 Gen Purpose Int */
+#define IXGBE_EIMS_GPI_SDP1     IXGBE_EICR_GPI_SDP1  /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMS_GPI_SDP2     IXGBE_EICR_GPI_SDP2  /* SDP2 Gen Purpose Int */
+#define IXGBE_EIMS_ECC          IXGBE_EICR_ECC       /* ECC Error */
+#define IXGBE_EIMS_PBUR         IXGBE_EICR_PBUR      /* Pkt Buf Handler Err */
+#define IXGBE_EIMS_DHER         IXGBE_EICR_DHER      /* Descr Handler Error */
+#define IXGBE_EIMS_TCP_TIMER    IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EIMS_OTHER        IXGBE_EICR_OTHER     /* INT Cause Active */
+
+/* Extended Interrupt Mask Clear */
+#define IXGBE_EIMC_RTX_QUEUE    IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMC_FLOW_DIR     IXGBE_EICR_FLOW_DIR  /* FDir Exception */
+#define IXGBE_EIMC_RX_MISS      IXGBE_EICR_RX_MISS   /* Packet Buffer Overrun */
+#define IXGBE_EIMC_PCI          IXGBE_EICR_PCI       /* PCI Exception */
+#define IXGBE_EIMC_MAILBOX      IXGBE_EICR_MAILBOX   /* VF to PF Mailbox Int */
+#define IXGBE_EIMC_LSC          IXGBE_EICR_LSC       /* Link Status Change */
+#define IXGBE_EIMC_MNG          IXGBE_EICR_MNG       /* MNG Event Interrupt */
+#define IXGBE_EIMC_TIMESYNC     IXGBE_EICR_TIMESYNC  /* Timesync Event */
+#define IXGBE_EIMC_GPI_SDP0     IXGBE_EICR_GPI_SDP0  /* SDP0 Gen Purpose Int */
+#define IXGBE_EIMC_GPI_SDP1     IXGBE_EICR_GPI_SDP1  /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMC_GPI_SDP2     IXGBE_EICR_GPI_SDP2  /* SDP2 Gen Purpose Int */
+#define IXGBE_EIMC_ECC          IXGBE_EICR_ECC       /* ECC Error */
+#define IXGBE_EIMC_PBUR         IXGBE_EICR_PBUR      /* Pkt Buf Handler Err */
+#define IXGBE_EIMC_DHER         IXGBE_EICR_DHER      /* Desc Handler Err */
+#define IXGBE_EIMC_TCP_TIMER    IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EIMC_OTHER        IXGBE_EICR_OTHER     /* INT Cause Active */
+
+#define IXGBE_EIMS_ENABLE_MASK ( \
+				IXGBE_EIMS_RTX_QUEUE       | \
+				IXGBE_EIMS_LSC             | \
+				IXGBE_EIMS_TCP_TIMER       | \
+				IXGBE_EIMS_OTHER)
+
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define IXGBE_IMIR_PORT_IM_EN     0x00010000  /* TCP port enable */
+#define IXGBE_IMIR_PORT_BP        0x00020000  /* TCP port check bypass */
+#define IXGBE_IMIREXT_SIZE_BP     0x00001000  /* Packet size bypass */
+#define IXGBE_IMIREXT_CTRL_URG    0x00002000  /* Check URG bit in header */
+#define IXGBE_IMIREXT_CTRL_ACK    0x00004000  /* Check ACK bit in header */
+#define IXGBE_IMIREXT_CTRL_PSH    0x00008000  /* Check PSH bit in header */
+#define IXGBE_IMIREXT_CTRL_RST    0x00010000  /* Check RST bit in header */
+#define IXGBE_IMIREXT_CTRL_SYN    0x00020000  /* Check SYN bit in header */
+#define IXGBE_IMIREXT_CTRL_FIN    0x00040000  /* Check FIN bit in header */
+#define IXGBE_IMIREXT_CTRL_BP     0x00080000  /* Bypass check of control bits */
+#define IXGBE_IMIR_SIZE_BP_82599  0x00001000 /* Packet size bypass */
+#define IXGBE_IMIR_CTRL_URG_82599 0x00002000 /* Check URG bit in header */
+#define IXGBE_IMIR_CTRL_ACK_82599 0x00004000 /* Check ACK bit in header */
+#define IXGBE_IMIR_CTRL_PSH_82599 0x00008000 /* Check PSH bit in header */
+#define IXGBE_IMIR_CTRL_RST_82599 0x00010000 /* Check RST bit in header */
+#define IXGBE_IMIR_CTRL_SYN_82599 0x00020000 /* Check SYN bit in header */
+#define IXGBE_IMIR_CTRL_FIN_82599 0x00040000 /* Check FIN bit in header */
+#define IXGBE_IMIR_CTRL_BP_82599  0x00080000 /* Bypass check of control bits */
+#define IXGBE_IMIR_LLI_EN_82599   0x00100000 /* Enables low latency Int */
+#define IXGBE_IMIR_RX_QUEUE_MASK_82599  0x0000007F /* Rx Queue Mask */
+#define IXGBE_IMIR_RX_QUEUE_SHIFT_82599 21 /* Rx Queue Shift */
+#define IXGBE_IMIRVP_PRIORITY_MASK      0x00000007 /* VLAN priority mask */
+#define IXGBE_IMIRVP_PRIORITY_EN        0x00000008 /* VLAN priority enable */
+
+#define IXGBE_MAX_FTQF_FILTERS          128
+#define IXGBE_FTQF_PROTOCOL_MASK        0x00000003
+#define IXGBE_FTQF_PROTOCOL_TCP         0x00000000
+#define IXGBE_FTQF_PROTOCOL_UDP         0x00000001
+#define IXGBE_FTQF_PROTOCOL_SCTP        2
+#define IXGBE_FTQF_PRIORITY_MASK        0x00000007
+#define IXGBE_FTQF_PRIORITY_SHIFT       2
+#define IXGBE_FTQF_POOL_MASK            0x0000003F
+#define IXGBE_FTQF_POOL_SHIFT           8
+#define IXGBE_FTQF_5TUPLE_MASK_MASK     0x0000001F
+#define IXGBE_FTQF_5TUPLE_MASK_SHIFT    25
+#define IXGBE_FTQF_SOURCE_ADDR_MASK     0x1E
+#define IXGBE_FTQF_DEST_ADDR_MASK       0x1D
+#define IXGBE_FTQF_SOURCE_PORT_MASK     0x1B
+#define IXGBE_FTQF_DEST_PORT_MASK       0x17
+#define IXGBE_FTQF_PROTOCOL_COMP_MASK   0x0F
+#define IXGBE_FTQF_POOL_MASK_EN         0x40000000
+#define IXGBE_FTQF_QUEUE_ENABLE         0x80000000
+
+/* Interrupt clear mask */
+#define IXGBE_IRQ_CLEAR_MASK    0xFFFFFFFF
+
+/* Interrupt Vector Allocation Registers */
+#define IXGBE_IVAR_REG_NUM      25
+#define IXGBE_IVAR_REG_NUM_82599       64
+#define IXGBE_IVAR_TXRX_ENTRY   96
+#define IXGBE_IVAR_RX_ENTRY     64
+#define IXGBE_IVAR_RX_QUEUE(_i)    (0 + (_i))
+#define IXGBE_IVAR_TX_QUEUE(_i)    (64 + (_i))
+#define IXGBE_IVAR_TX_ENTRY     32
+
+#define IXGBE_IVAR_TCP_TIMER_INDEX       96 /* 0 based index */
+#define IXGBE_IVAR_OTHER_CAUSES_INDEX    97 /* 0 based index */
+
+#define IXGBE_MSIX_VECTOR(_i)   (0 + (_i))
+
+#define IXGBE_IVAR_ALLOC_VAL    0x80 /* Interrupt Allocation valid */
+
+/* ETYPE Queue Filter/Select Bit Masks */
+#define IXGBE_MAX_ETQF_FILTERS  8
+#define IXGBE_ETQF_FCOE         0x08000000 /* bit 27 */
+#define IXGBE_ETQF_BCN          0x10000000 /* bit 28 */
+#define IXGBE_ETQF_TX_ANTISPOOF	0x20000000 /* bit 29 */
+#define IXGBE_ETQF_1588         0x40000000 /* bit 30 */
+#define IXGBE_ETQF_FILTER_EN    0x80000000 /* bit 31 */
+#define IXGBE_ETQF_POOL_ENABLE   (1 << 26) /* bit 26 */
+#define IXGBE_ETQF_POOL_SHIFT		20
+
+#define IXGBE_ETQS_RX_QUEUE     0x007F0000 /* bits 22:16 */
+#define IXGBE_ETQS_RX_QUEUE_SHIFT       16
+#define IXGBE_ETQS_LLI          0x20000000 /* bit 29 */
+#define IXGBE_ETQS_QUEUE_EN     0x80000000 /* bit 31 */
+
+/*
+ * ETQF filter list: one static filter per filter consumer. This is
+ *                   to avoid filter collisions later. Add new filters
+ *                   here!!
+ *
+ * Current filters:
+ *    EAPOL 802.1x (0x888e): Filter 0
+ *    FCoE (0x8906):         Filter 2
+ *    1588 (0x88f7):         Filter 3
+ *    FIP  (0x8914):         Filter 4
+ */
+#define IXGBE_ETQF_FILTER_EAPOL          0
+#define IXGBE_ETQF_FILTER_FCOE           2
+#define IXGBE_ETQF_FILTER_1588           3
+#define IXGBE_ETQF_FILTER_FIP            4
+#define IXGBE_ETQF_FILTER_LLDP		 5
+#define IXGBE_ETQF_FILTER_LACP		 6
+
+/* VLAN Control Bit Masks */
+#define IXGBE_VLNCTRL_VET       0x0000FFFF  /* bits 0-15 */
+#define IXGBE_VLNCTRL_CFI       0x10000000  /* bit 28 */
+#define IXGBE_VLNCTRL_CFIEN     0x20000000  /* bit 29 */
+#define IXGBE_VLNCTRL_VFE       0x40000000  /* bit 30 */
+#define IXGBE_VLNCTRL_VME       0x80000000  /* bit 31 */
+
+/* VLAN pool filtering masks */
+#define IXGBE_VLVF_VIEN         0x80000000  /* filter is valid */
+#define IXGBE_VLVF_ENTRIES      64
+#define IXGBE_VLVF_VLANID_MASK  0x00000FFF
+
+/* Per VF Port VLAN insertion rules */
+#define IXGBE_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */
+#define IXGBE_VMVIR_VLANA_NEVER   0x80000000 /* Never insert VLAN tag */
+
+#define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100  /* 802.1q protocol */
+
+/* STATUS Bit Masks */
+#define IXGBE_STATUS_LAN_ID         0x0000000C /* LAN ID */
+#define IXGBE_STATUS_LAN_ID_SHIFT   2          /* LAN ID Shift*/
+#define IXGBE_STATUS_GIO            0x00080000 /* GIO Master Enable Status */
+
+#define IXGBE_STATUS_LAN_ID_0   0x00000000 /* LAN ID 0 */
+#define IXGBE_STATUS_LAN_ID_1   0x00000004 /* LAN ID 1 */
+
+/* ESDP Bit Masks */
+#define IXGBE_ESDP_SDP0 0x00000001 /* SDP0 Data Value */
+#define IXGBE_ESDP_SDP1 0x00000002 /* SDP1 Data Value */
+#define IXGBE_ESDP_SDP2 0x00000004 /* SDP2 Data Value */
+#define IXGBE_ESDP_SDP3 0x00000008 /* SDP3 Data Value */
+#define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */
+#define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */
+#define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */
+#define IXGBE_ESDP_SDP0_DIR     0x00000100 /* SDP0 IO direction */
+#define IXGBE_ESDP_SDP1_DIR     0x00000200 /* SDP1 IO direction */
+#define IXGBE_ESDP_SDP4_DIR     0x00000004 /* SDP4 IO direction */
+#define IXGBE_ESDP_SDP5_DIR     0x00002000 /* SDP5 IO direction */
+#define IXGBE_ESDP_SDP0_NATIVE  0x00010000 /* SDP0 Native Function */
+#define IXGBE_ESDP_SDP1_NATIVE  0x00020000 /* SDP1 IO mode */
+
+/* LEDCTL Bit Masks */
+#define IXGBE_LED_IVRT_BASE      0x00000040
+#define IXGBE_LED_BLINK_BASE     0x00000080
+#define IXGBE_LED_MODE_MASK_BASE 0x0000000F
+#define IXGBE_LED_OFFSET(_base, _i) (_base << (8 * (_i)))
+#define IXGBE_LED_MODE_SHIFT(_i) (8 * (_i))
+#define IXGBE_LED_IVRT(_i)       IXGBE_LED_OFFSET(IXGBE_LED_IVRT_BASE, _i)
+#define IXGBE_LED_BLINK(_i)      IXGBE_LED_OFFSET(IXGBE_LED_BLINK_BASE, _i)
+#define IXGBE_LED_MODE_MASK(_i)  IXGBE_LED_OFFSET(IXGBE_LED_MODE_MASK_BASE, _i)
+
+/* LED modes */
+#define IXGBE_LED_LINK_UP       0x0
+#define IXGBE_LED_LINK_10G      0x1
+#define IXGBE_LED_MAC           0x2
+#define IXGBE_LED_FILTER        0x3
+#define IXGBE_LED_LINK_ACTIVE   0x4
+#define IXGBE_LED_LINK_1G       0x5
+#define IXGBE_LED_ON            0xE
+#define IXGBE_LED_OFF           0xF
+
+/* AUTOC Bit Masks */
+#define IXGBE_AUTOC_KX4_KX_SUPP_MASK 0xC0000000
+#define IXGBE_AUTOC_KX4_SUPP    0x80000000
+#define IXGBE_AUTOC_KX_SUPP     0x40000000
+#define IXGBE_AUTOC_PAUSE       0x30000000
+#define IXGBE_AUTOC_ASM_PAUSE   0x20000000
+#define IXGBE_AUTOC_SYM_PAUSE   0x10000000
+#define IXGBE_AUTOC_RF          0x08000000
+#define IXGBE_AUTOC_PD_TMR      0x06000000
+#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000
+#define IXGBE_AUTOC_AN_RX_DRIFT 0x00800000
+#define IXGBE_AUTOC_AN_RX_ALIGN 0x007C0000
+#define IXGBE_AUTOC_FECA        0x00040000
+#define IXGBE_AUTOC_FECR        0x00020000
+#define IXGBE_AUTOC_KR_SUPP     0x00010000
+#define IXGBE_AUTOC_AN_RESTART  0x00001000
+#define IXGBE_AUTOC_FLU         0x00000001
+#define IXGBE_AUTOC_LMS_SHIFT   13
+#define IXGBE_AUTOC_LMS_10G_SERIAL      (0x3 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR       (0x4 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_SGMII_1G_100M   (0x5 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII (0x7 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_MASK            (0x7 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN   (0x0 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN  (0x1 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_AN           (0x2 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN          (0x4 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN    (0x6 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_ATTACH_TYPE     (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+
+#define IXGBE_AUTOC_1G_PMA_PMD_MASK    0x00000200
+#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT   9
+#define IXGBE_AUTOC_10G_PMA_PMD_MASK   0x00000180
+#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT  7
+#define IXGBE_AUTOC_10G_XAUI   (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_10G_KX4    (0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_10G_CX4    (0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_BX      (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_KX      (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_SFI     (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_KX_BX   (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+
+#define IXGBE_AUTOC2_UPPER_MASK  0xFFFF0000
+#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK  0x00030000
+#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT 16
+#define IXGBE_AUTOC2_10G_KR  (0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK  0x50000000
+#define IXGBE_AUTOC2_LINK_DISABLE_MASK        0x70000000
+
+#define IXGBE_MACC_FLU       0x00000001
+#define IXGBE_MACC_FSV_10G   0x00030000
+#define IXGBE_MACC_FS        0x00040000
+#define IXGBE_MAC_RX2TX_LPBK 0x00000002
+
+/* Veto Bit definition */
+#define IXGBE_MMNGC_MNG_VETO  0x00000001
+
+/* LINKS Bit Masks */
+#define IXGBE_LINKS_KX_AN_COMP  0x80000000
+#define IXGBE_LINKS_UP          0x40000000
+#define IXGBE_LINKS_SPEED       0x20000000
+#define IXGBE_LINKS_MODE        0x18000000
+#define IXGBE_LINKS_RX_MODE     0x06000000
+#define IXGBE_LINKS_TX_MODE     0x01800000
+#define IXGBE_LINKS_XGXS_EN     0x00400000
+#define IXGBE_LINKS_SGMII_EN    0x02000000
+#define IXGBE_LINKS_PCS_1G_EN   0x00200000
+#define IXGBE_LINKS_1G_AN_EN    0x00100000
+#define IXGBE_LINKS_KX_AN_IDLE  0x00080000
+#define IXGBE_LINKS_1G_SYNC     0x00040000
+#define IXGBE_LINKS_10G_ALIGN   0x00020000
+#define IXGBE_LINKS_10G_LANE_SYNC 0x00017000
+#define IXGBE_LINKS_TL_FAULT    0x00001000
+#define IXGBE_LINKS_SIGNAL      0x00000F00
+
+#define IXGBE_LINKS_SPEED_NON_STD   0x08000000
+#define IXGBE_LINKS_SPEED_82599     0x30000000
+#define IXGBE_LINKS_SPEED_10G_82599 0x30000000
+#define IXGBE_LINKS_SPEED_1G_82599  0x20000000
+#define IXGBE_LINKS_SPEED_100_82599 0x10000000
+#define IXGBE_LINK_UP_TIME      90 /* 9.0 Seconds */
+#define IXGBE_AUTO_NEG_TIME     45 /* 4.5 Seconds */
+
+#define IXGBE_LINKS2_AN_SUPPORTED   0x00000040
+
+/* PCS1GLSTA Bit Masks */
+#define IXGBE_PCS1GLSTA_LINK_OK         1
+#define IXGBE_PCS1GLSTA_SYNK_OK         0x10
+#define IXGBE_PCS1GLSTA_AN_COMPLETE     0x10000
+#define IXGBE_PCS1GLSTA_AN_PAGE_RX      0x20000
+#define IXGBE_PCS1GLSTA_AN_TIMED_OUT    0x40000
+#define IXGBE_PCS1GLSTA_AN_REMOTE_FAULT 0x80000
+#define IXGBE_PCS1GLSTA_AN_ERROR_RWS    0x100000
+
+#define IXGBE_PCS1GANA_SYM_PAUSE        0x80
+#define IXGBE_PCS1GANA_ASM_PAUSE        0x100
+
+/* PCS1GLCTL Bit Masks */
+#define IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN  0x00040000 /* PCS 1G autoneg to en */
+#define IXGBE_PCS1GLCTL_FLV_LINK_UP     1
+#define IXGBE_PCS1GLCTL_FORCE_LINK      0x20
+#define IXGBE_PCS1GLCTL_LOW_LINK_LATCH  0x40
+#define IXGBE_PCS1GLCTL_AN_ENABLE       0x10000
+#define IXGBE_PCS1GLCTL_AN_RESTART      0x20000
+
+/* ANLP1 Bit Masks */
+#define IXGBE_ANLP1_PAUSE               0x0C00
+#define IXGBE_ANLP1_SYM_PAUSE           0x0400
+#define IXGBE_ANLP1_ASM_PAUSE           0x0800
+#define IXGBE_ANLP1_AN_STATE_MASK       0x000f0000
+
+/* SW Semaphore Register bitmasks */
+#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define IXGBE_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define IXGBE_SWFW_REGSMP 0x80000000 /* Register Semaphore bit 31 */
+
+/* SW_FW_SYNC/GSSR definitions */
+#define IXGBE_GSSR_EEP_SM		0x0001
+#define IXGBE_GSSR_PHY0_SM		0x0002
+#define IXGBE_GSSR_PHY1_SM		0x0004
+#define IXGBE_GSSR_MAC_CSR_SM		0x0008
+#define IXGBE_GSSR_FLASH_SM		0x0010
+#define IXGBE_GSSR_SW_MNG_SM		0x0400
+#define IXGBE_GSSR_SHARED_I2C_SM	0x1806 /* Wait for both phys & I2Cs */
+#define IXGBE_GSSR_I2C_MASK		0x1800
+
+/* FW Status register bitmask */
+#define IXGBE_FWSTS_FWRI    0x00000200 /* Firmware Reset Indication */
+
+/* EEC Register */
+#define IXGBE_EEC_SK        0x00000001 /* EEPROM Clock */
+#define IXGBE_EEC_CS        0x00000002 /* EEPROM Chip Select */
+#define IXGBE_EEC_DI        0x00000004 /* EEPROM Data In */
+#define IXGBE_EEC_DO        0x00000008 /* EEPROM Data Out */
+#define IXGBE_EEC_FWE_MASK  0x00000030 /* FLASH Write Enable */
+#define IXGBE_EEC_FWE_DIS   0x00000010 /* Disable FLASH writes */
+#define IXGBE_EEC_FWE_EN    0x00000020 /* Enable FLASH writes */
+#define IXGBE_EEC_FWE_SHIFT 4
+#define IXGBE_EEC_REQ       0x00000040 /* EEPROM Access Request */
+#define IXGBE_EEC_GNT       0x00000080 /* EEPROM Access Grant */
+#define IXGBE_EEC_PRES      0x00000100 /* EEPROM Present */
+#define IXGBE_EEC_ARD       0x00000200 /* EEPROM Auto Read Done */
+#define IXGBE_EEC_FLUP      0x00800000 /* Flash update command */
+#define IXGBE_EEC_SEC1VAL   0x02000000 /* Sector 1 Valid */
+#define IXGBE_EEC_FLUDONE   0x04000000 /* Flash update done */
+/* EEPROM Addressing bits based on type (0-small, 1-large) */
+#define IXGBE_EEC_ADDR_SIZE 0x00000400
+#define IXGBE_EEC_SIZE      0x00007800 /* EEPROM Size */
+#define IXGBE_EERD_MAX_ADDR 0x00003FFF /* EERD alows 14 bits for addr. */
+
+#define IXGBE_EEC_SIZE_SHIFT          11
+#define IXGBE_EEPROM_WORD_SIZE_SHIFT  6
+#define IXGBE_EEPROM_OPCODE_BITS      8
+
+/* Part Number String Length */
+#define IXGBE_PBANUM_LENGTH 11
+
+/* Checksum and EEPROM pointers */
+#define IXGBE_PBANUM_PTR_GUARD		0xFAFA
+#define IXGBE_EEPROM_CHECKSUM		0x3F
+#define IXGBE_EEPROM_SUM		0xBABA
+#define IXGBE_PCIE_ANALOG_PTR		0x03
+#define IXGBE_ATLAS0_CONFIG_PTR		0x04
+#define IXGBE_PHY_PTR			0x04
+#define IXGBE_ATLAS1_CONFIG_PTR		0x05
+#define IXGBE_OPTION_ROM_PTR		0x05
+#define IXGBE_PCIE_GENERAL_PTR		0x06
+#define IXGBE_PCIE_CONFIG0_PTR		0x07
+#define IXGBE_PCIE_CONFIG1_PTR		0x08
+#define IXGBE_CORE0_PTR			0x09
+#define IXGBE_CORE1_PTR			0x0A
+#define IXGBE_MAC0_PTR			0x0B
+#define IXGBE_MAC1_PTR			0x0C
+#define IXGBE_CSR0_CONFIG_PTR		0x0D
+#define IXGBE_CSR1_CONFIG_PTR		0x0E
+#define IXGBE_PCIE_ANALOG_PTR_X550	0x02
+#define IXGBE_SHADOW_RAM_SIZE_X550	0x4000
+#define IXGBE_IXGBE_PCIE_GENERAL_SIZE	0x24
+#define IXGBE_PCIE_CONFIG_SIZE		0x08
+#define IXGBE_EEPROM_LAST_WORD		0x41
+#define IXGBE_FW_PTR			0x0F
+#define IXGBE_PBANUM0_PTR		0x15
+#define IXGBE_PBANUM1_PTR		0x16
+#define IXGBE_FREE_SPACE_PTR		0X3E
+
+/* External Thermal Sensor Config */
+#define IXGBE_ETS_CFG                   0x26
+#define IXGBE_ETS_LTHRES_DELTA_MASK     0x07C0
+#define IXGBE_ETS_LTHRES_DELTA_SHIFT    6
+#define IXGBE_ETS_TYPE_MASK             0x0038
+#define IXGBE_ETS_TYPE_SHIFT            3
+#define IXGBE_ETS_TYPE_EMC              0x000
+#define IXGBE_ETS_TYPE_EMC_SHIFTED      0x000
+#define IXGBE_ETS_NUM_SENSORS_MASK      0x0007
+#define IXGBE_ETS_DATA_LOC_MASK         0x3C00
+#define IXGBE_ETS_DATA_LOC_SHIFT        10
+#define IXGBE_ETS_DATA_INDEX_MASK       0x0300
+#define IXGBE_ETS_DATA_INDEX_SHIFT      8
+#define IXGBE_ETS_DATA_HTHRESH_MASK     0x00FF
+
+#define IXGBE_SAN_MAC_ADDR_PTR  0x28
+#define IXGBE_DEVICE_CAPS       0x2C
+#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
+#define IXGBE_PCIE_MSIX_82599_CAPS  0x72
+#define IXGBE_MAX_MSIX_VECTORS_82599	0x40
+#define IXGBE_PCIE_MSIX_82598_CAPS  0x62
+#define IXGBE_MAX_MSIX_VECTORS_82598	0x13
+
+/* MSI-X capability fields masks */
+#define IXGBE_PCIE_MSIX_TBL_SZ_MASK     0x7FF
+
+/* Legacy EEPROM word offsets */
+#define IXGBE_ISCSI_BOOT_CAPS           0x0033
+#define IXGBE_ISCSI_SETUP_PORT_0        0x0030
+#define IXGBE_ISCSI_SETUP_PORT_1        0x0034
+
+/* EEPROM Commands - SPI */
+#define IXGBE_EEPROM_MAX_RETRY_SPI      5000 /* Max wait 5ms for RDY signal */
+#define IXGBE_EEPROM_STATUS_RDY_SPI     0x01
+#define IXGBE_EEPROM_READ_OPCODE_SPI    0x03  /* EEPROM read opcode */
+#define IXGBE_EEPROM_WRITE_OPCODE_SPI   0x02  /* EEPROM write opcode */
+#define IXGBE_EEPROM_A8_OPCODE_SPI      0x08  /* opcode bit-3 = addr bit-8 */
+#define IXGBE_EEPROM_WREN_OPCODE_SPI    0x06  /* EEPROM set Write Ena latch */
+/* EEPROM reset Write Enable latch */
+#define IXGBE_EEPROM_WRDI_OPCODE_SPI    0x04
+#define IXGBE_EEPROM_RDSR_OPCODE_SPI    0x05  /* EEPROM read Status reg */
+#define IXGBE_EEPROM_WRSR_OPCODE_SPI    0x01  /* EEPROM write Status reg */
+#define IXGBE_EEPROM_ERASE4K_OPCODE_SPI 0x20  /* EEPROM ERASE 4KB */
+#define IXGBE_EEPROM_ERASE64K_OPCODE_SPI  0xD8  /* EEPROM ERASE 64KB */
+#define IXGBE_EEPROM_ERASE256_OPCODE_SPI  0xDB  /* EEPROM ERASE 256B */
+
+/* EEPROM Read Register */
+#define IXGBE_EEPROM_RW_REG_DATA   16 /* data offset in EEPROM read reg */
+#define IXGBE_EEPROM_RW_REG_DONE   2  /* Offset to READ done bit */
+#define IXGBE_EEPROM_RW_REG_START  1  /* First bit to start operation */
+#define IXGBE_EEPROM_RW_ADDR_SHIFT 2  /* Shift to the address bits */
+#define IXGBE_NVM_POLL_WRITE       1  /* Flag for polling for write complete */
+#define IXGBE_NVM_POLL_READ        0  /* Flag for polling for read complete */
+
+#define IXGBE_EEPROM_PAGE_SIZE_MAX       128
+#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */
+#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */
+
+#define IXGBE_EEPROM_CTRL_2	1 /* EEPROM CTRL word 2 */
+#define IXGBE_EEPROM_CCD_BIT	2 /* EEPROM Core Clock Disable bit */
+
+#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS
+#define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
+#endif
+
+#ifndef IXGBE_EERD_EEWR_ATTEMPTS
+/* Number of 5 microseconds we wait for EERD read and
+ * EERW write to complete */
+#define IXGBE_EERD_EEWR_ATTEMPTS 100000
+#endif
+
+#ifndef IXGBE_FLUDONE_ATTEMPTS
+/* # attempts we wait for flush update to complete */
+#define IXGBE_FLUDONE_ATTEMPTS 20000
+#endif
+
+#define IXGBE_PCIE_CTRL2                 0x5   /* PCIe Control 2 Offset */
+#define IXGBE_PCIE_CTRL2_DUMMY_ENABLE    0x8   /* Dummy Function Enable */
+#define IXGBE_PCIE_CTRL2_LAN_DISABLE     0x2   /* LAN PCI Disable */
+#define IXGBE_PCIE_CTRL2_DISABLE_SELECT  0x1   /* LAN Disable Select */
+
+#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET  0x0
+#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET  0x3
+#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP  0x1
+#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS  0x2
+#define IXGBE_FW_LESM_PARAMETERS_PTR     0x2
+#define IXGBE_FW_LESM_STATE_1            0x1
+#define IXGBE_FW_LESM_STATE_ENABLED      0x8000 /* LESM Enable bit */
+#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR   0x4
+#define IXGBE_FW_PATCH_VERSION_4         0x7
+#define IXGBE_FCOE_IBA_CAPS_BLK_PTR         0x33 /* iSCSI/FCOE block */
+#define IXGBE_FCOE_IBA_CAPS_FCOE            0x20 /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_BLK_PTR            0x17 /* iSCSI/FCOE block */
+#define IXGBE_ISCSI_FCOE_FLAGS_OFFSET       0x0  /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_FLAGS_ENABLE       0x1  /* FCOE flags enable bit */
+#define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR      0x27 /* Alt. SAN MAC block */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET  0x0 /* Alt. SAN MAC capability */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt. SAN MAC 0 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT1_OFFSET 0x4 /* Alt. SAN MAC 1 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET  0x7 /* Alt. WWNN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET  0x8 /* Alt. WWPN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_SANMAC  0x0 /* Alt. SAN MAC exists */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN  0x1 /* Alt. WWN base exists */
+
+#define IXGBE_DEVICE_CAPS_WOL_PORT0_1  0x4 /* WoL supported on ports 0 & 1 */
+#define IXGBE_DEVICE_CAPS_WOL_PORT0    0x8 /* WoL supported on port 0 */
+#define IXGBE_DEVICE_CAPS_WOL_MASK     0xC /* Mask for WoL capabilities */
+
+/* PCI Bus Info */
+#define IXGBE_PCI_DEVICE_STATUS   0xAA
+#define IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING   0x0020
+#define IXGBE_PCI_LINK_STATUS     0xB2
+#define IXGBE_PCI_DEVICE_CONTROL2 0xC8
+#define IXGBE_PCI_LINK_WIDTH      0x3F0
+#define IXGBE_PCI_LINK_WIDTH_1    0x10
+#define IXGBE_PCI_LINK_WIDTH_2    0x20
+#define IXGBE_PCI_LINK_WIDTH_4    0x40
+#define IXGBE_PCI_LINK_WIDTH_8    0x80
+#define IXGBE_PCI_LINK_SPEED      0xF
+#define IXGBE_PCI_LINK_SPEED_2500 0x1
+#define IXGBE_PCI_LINK_SPEED_5000 0x2
+#define IXGBE_PCI_LINK_SPEED_8000 0x3
+#define IXGBE_PCI_HEADER_TYPE_REGISTER  0x0E
+#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define IXGBE_PCI_DEVICE_CONTROL2_16ms  0x0005
+
+#define IXGBE_PCIDEVCTRL2_TIMEO_MASK	0xf
+#define IXGBE_PCIDEVCTRL2_16_32ms_def	0x0
+#define IXGBE_PCIDEVCTRL2_50_100us	0x1
+#define IXGBE_PCIDEVCTRL2_1_2ms		0x2
+#define IXGBE_PCIDEVCTRL2_16_32ms	0x5
+#define IXGBE_PCIDEVCTRL2_65_130ms	0x6
+#define IXGBE_PCIDEVCTRL2_260_520ms	0x9
+#define IXGBE_PCIDEVCTRL2_1_2s		0xa
+#define IXGBE_PCIDEVCTRL2_4_8s		0xd
+#define IXGBE_PCIDEVCTRL2_17_34s	0xe
+
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT	800
+
+/* RAH */
+#define IXGBE_RAH_VIND_MASK     0x003C0000
+#define IXGBE_RAH_VIND_SHIFT    18
+#define IXGBE_RAH_AV            0x80000000
+#define IXGBE_CLEAR_VMDQ_ALL    0xFFFFFFFF
+
+/* Header split receive */
+#define IXGBE_RFCTL_ISCSI_DIS       0x00000001
+#define IXGBE_RFCTL_ISCSI_DWC_MASK  0x0000003E
+#define IXGBE_RFCTL_ISCSI_DWC_SHIFT 1
+#define IXGBE_RFCTL_RSC_DIS		0x00000020
+#define IXGBE_RFCTL_NFSW_DIS        0x00000040
+#define IXGBE_RFCTL_NFSR_DIS        0x00000080
+#define IXGBE_RFCTL_NFS_VER_MASK    0x00000300
+#define IXGBE_RFCTL_NFS_VER_SHIFT   8
+#define IXGBE_RFCTL_NFS_VER_2       0
+#define IXGBE_RFCTL_NFS_VER_3       1
+#define IXGBE_RFCTL_NFS_VER_4       2
+#define IXGBE_RFCTL_IPV6_DIS        0x00000400
+#define IXGBE_RFCTL_IPV6_XSUM_DIS   0x00000800
+#define IXGBE_RFCTL_IPFRSP_DIS      0x00004000
+#define IXGBE_RFCTL_IPV6_EX_DIS     0x00010000
+#define IXGBE_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
+/* Transmit Config masks */
+#define IXGBE_TXDCTL_ENABLE     0x02000000 /* Enable specific Tx Queue */
+#define IXGBE_TXDCTL_SWFLSH     0x04000000 /* Tx Desc. write-back flushing */
+#define IXGBE_TXDCTL_WTHRESH_SHIFT      16 /* shift to WTHRESH bits */
+/* Enable short packet padding to 64 bytes */
+#define IXGBE_TX_PAD_ENABLE     0x00000400
+#define IXGBE_JUMBO_FRAME_ENABLE 0x00000004  /* Allow jumbo frames */
+/* This allows for 16K packets + 4k for vlan */
+#define IXGBE_MAX_FRAME_SZ      0x40040000
+
+#define IXGBE_TDWBAL_HEAD_WB_ENABLE   0x1      /* Tx head write-back enable */
+#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE 0x2      /* Tx seq# write-back enable */
+
+/* Receive Config masks */
+#define IXGBE_RXCTRL_RXEN       0x00000001  /* Enable Receiver */
+#define IXGBE_RXCTRL_DMBYPS     0x00000002  /* Descriptor Monitor Bypass */
+#define IXGBE_RXDCTL_ENABLE     0x02000000  /* Enable specific Rx Queue */
+#define IXGBE_RXDCTL_SWFLSH     0x04000000  /* Rx Desc. write-back flushing */
+#define IXGBE_RXDCTL_RLPMLMASK  0x00003FFF  /* Only supported on the X540 */
+#define IXGBE_RXDCTL_RLPML_EN   0x00008000
+#define IXGBE_RXDCTL_VME        0x40000000  /* VLAN mode enable */
+
+#define IXGBE_TSAUXC_EN_CLK   0x00000004
+#define IXGBE_TSAUXC_SYNCLK   0x00000008
+#define IXGBE_TSAUXC_SDP0_INT 0x00000040
+
+#define IXGBE_TSYNCTXCTL_VALID		0x00000001 /* Tx timestamp valid */
+#define IXGBE_TSYNCTXCTL_ENABLED	0x00000010 /* Tx timestamping enabled */
+
+#define IXGBE_TSYNCRXCTL_VALID		0x00000001 /* Rx timestamp valid */
+#define IXGBE_TSYNCRXCTL_TYPE_MASK	0x0000000E /* Rx type mask */
+#define IXGBE_TSYNCRXCTL_TYPE_L2_V2	0x00
+#define IXGBE_TSYNCRXCTL_TYPE_L4_V1	0x02
+#define IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2	0x04
+#define IXGBE_TSYNCRXCTL_TYPE_EVENT_V2	0x0A
+#define IXGBE_TSYNCRXCTL_ENABLED	0x00000010 /* Rx Timestamping enabled */
+
+#define IXGBE_RXMTRL_V1_CTRLT_MASK	0x000000FF
+#define IXGBE_RXMTRL_V1_SYNC_MSG	0x00
+#define IXGBE_RXMTRL_V1_DELAY_REQ_MSG	0x01
+#define IXGBE_RXMTRL_V1_FOLLOWUP_MSG	0x02
+#define IXGBE_RXMTRL_V1_DELAY_RESP_MSG	0x03
+#define IXGBE_RXMTRL_V1_MGMT_MSG	0x04
+
+#define IXGBE_RXMTRL_V2_MSGID_MASK		0x0000FF00
+#define IXGBE_RXMTRL_V2_SYNC_MSG		0x0000
+#define IXGBE_RXMTRL_V2_DELAY_REQ_MSG		0x0100
+#define IXGBE_RXMTRL_V2_PDELAY_REQ_MSG		0x0200
+#define IXGBE_RXMTRL_V2_PDELAY_RESP_MSG		0x0300
+#define IXGBE_RXMTRL_V2_FOLLOWUP_MSG		0x0800
+#define IXGBE_RXMTRL_V2_DELAY_RESP_MSG		0x0900
+#define IXGBE_RXMTRL_V2_PDELAY_FOLLOWUP_MSG	0x0A00
+#define IXGBE_RXMTRL_V2_ANNOUNCE_MSG		0x0B00
+#define IXGBE_RXMTRL_V2_SIGNALING_MSG		0x0C00
+#define IXGBE_RXMTRL_V2_MGMT_MSG		0x0D00
+
+#define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */
+#define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/
+#define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */
+#define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */
+#define IXGBE_FCTRL_PMCF 0x00001000 /* Pass MAC Control Frames */
+#define IXGBE_FCTRL_DPF 0x00002000 /* Discard Pause Frame */
+/* Receive Priority Flow Control Enable */
+#define IXGBE_FCTRL_RPFCE 0x00004000
+#define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */
+#define IXGBE_MFLCN_PMCF        0x00000001 /* Pass MAC Control Frames */
+#define IXGBE_MFLCN_DPF         0x00000002 /* Discard Pause Frame */
+#define IXGBE_MFLCN_RPFCE       0x00000004 /* Receive Priority FC Enable */
+#define IXGBE_MFLCN_RFCE        0x00000008 /* Receive FC Enable */
+#define IXGBE_MFLCN_RPFCE_MASK	0x00000FF4 /* Receive FC Mask */
+
+#define IXGBE_MFLCN_RPFCE_SHIFT		 4
+
+/* Multiple Receive Queue Control */
+#define IXGBE_MRQC_RSSEN                 0x00000001  /* RSS Enable */
+#define IXGBE_MRQC_MRQE_MASK                    0xF /* Bits 3:0 */
+#define IXGBE_MRQC_RT8TCEN               0x00000002 /* 8 TC no RSS */
+#define IXGBE_MRQC_RT4TCEN               0x00000003 /* 4 TC no RSS */
+#define IXGBE_MRQC_RTRSS8TCEN            0x00000004 /* 8 TC w/ RSS */
+#define IXGBE_MRQC_RTRSS4TCEN            0x00000005 /* 4 TC w/ RSS */
+#define IXGBE_MRQC_VMDQEN                0x00000008 /* VMDq2 64 pools no RSS */
+#define IXGBE_MRQC_VMDQRSS32EN           0x0000000A /* VMDq2 32 pools w/ RSS */
+#define IXGBE_MRQC_VMDQRSS64EN           0x0000000B /* VMDq2 64 pools w/ RSS */
+#define IXGBE_MRQC_VMDQRT8TCEN           0x0000000C /* VMDq2/RT 16 pool 8 TC */
+#define IXGBE_MRQC_VMDQRT4TCEN           0x0000000D /* VMDq2/RT 32 pool 4 TC */
+#define IXGBE_MRQC_RSS_FIELD_MASK        0xFFFF0000
+#define IXGBE_MRQC_RSS_FIELD_IPV4_TCP    0x00010000
+#define IXGBE_MRQC_RSS_FIELD_IPV4        0x00020000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP 0x00040000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX     0x00080000
+#define IXGBE_MRQC_RSS_FIELD_IPV6        0x00100000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_TCP    0x00200000
+#define IXGBE_MRQC_RSS_FIELD_IPV4_UDP    0x00400000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_UDP    0x00800000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000
+#define IXGBE_MRQC_MULTIPLE_RSS          0x00002000
+#define IXGBE_MRQC_L3L4TXSWEN            0x00008000
+
+#define IXGBE_FWSM_TS_ENABLED	0x1
+
+/* Queue Drop Enable */
+#define IXGBE_QDE_ENABLE	0x00000001
+#define IXGBE_QDE_HIDE_VLAN	0x00000002
+#define IXGBE_QDE_IDX_MASK	0x00007F00
+#define IXGBE_QDE_IDX_SHIFT	8
+#define IXGBE_QDE_WRITE		0x00010000
+
+#define IXGBE_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
+#define IXGBE_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
+#define IXGBE_TXD_CMD_EOP    0x01000000 /* End of Packet */
+#define IXGBE_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */
+#define IXGBE_TXD_CMD_IC     0x04000000 /* Insert Checksum */
+#define IXGBE_TXD_CMD_RS     0x08000000 /* Report Status */
+#define IXGBE_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
+#define IXGBE_TXD_CMD_VLE    0x40000000 /* Add VLAN tag */
+#define IXGBE_TXD_STAT_DD    0x00000001 /* Descriptor Done */
+
+#define IXGBE_RXDADV_IPSEC_STATUS_SECP                  0x00020000
+#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL       0x08000000
+#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_LENGTH         0x10000000
+#define IXGBE_RXDADV_IPSEC_ERROR_AUTH_FAILED            0x18000000
+#define IXGBE_RXDADV_IPSEC_ERROR_BIT_MASK               0x18000000
+/* Multiple Transmit Queue Command Register */
+#define IXGBE_MTQC_RT_ENA       0x1 /* DCB Enable */
+#define IXGBE_MTQC_VT_ENA       0x2 /* VMDQ2 Enable */
+#define IXGBE_MTQC_64Q_1PB      0x0 /* 64 queues 1 pack buffer */
+#define IXGBE_MTQC_32VF         0x8 /* 4 TX Queues per pool w/32VF's */
+#define IXGBE_MTQC_64VF         0x4 /* 2 TX Queues per pool w/64VF's */
+#define IXGBE_MTQC_8TC_8TQ      0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */
+#define IXGBE_MTQC_4TC_4TQ	0x8 /* 4 TC if RT_ENA or 4 TQ if VT_ENA */
+
+/* Receive Descriptor bit definitions */
+#define IXGBE_RXD_STAT_DD       0x01    /* Descriptor Done */
+#define IXGBE_RXD_STAT_EOP      0x02    /* End of Packet */
+#define IXGBE_RXD_STAT_FLM      0x04    /* FDir Match */
+#define IXGBE_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
+#define IXGBE_RXDADV_NEXTP_MASK   0x000FFFF0 /* Next Descriptor Index */
+#define IXGBE_RXDADV_NEXTP_SHIFT  0x00000004
+#define IXGBE_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
+#define IXGBE_RXD_STAT_L4CS     0x20    /* L4 xsum calculated */
+#define IXGBE_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
+#define IXGBE_RXD_STAT_PIF      0x80    /* passed in-exact filter */
+#define IXGBE_RXD_STAT_CRCV     0x100   /* Speculative CRC Valid */
+#define IXGBE_RXD_STAT_OUTERIPCS  0x100 /* Cloud IP xsum calculated */
+#define IXGBE_RXD_STAT_VEXT     0x200   /* 1st VLAN found */
+#define IXGBE_RXD_STAT_UDPV     0x400   /* Valid UDP checksum */
+#define IXGBE_RXD_STAT_DYNINT   0x800   /* Pkt caused INT via DYNINT */
+#define IXGBE_RXD_STAT_LLINT    0x800   /* Pkt caused Low Latency Interrupt */
+#define IXGBE_RXD_STAT_TS       0x10000 /* Time Stamp */
+#define IXGBE_RXD_STAT_SECP     0x20000 /* Security Processing */
+#define IXGBE_RXD_STAT_LB       0x40000 /* Loopback Status */
+#define IXGBE_RXD_STAT_ACK      0x8000  /* ACK Packet indication */
+#define IXGBE_RXD_ERR_CE        0x01    /* CRC Error */
+#define IXGBE_RXD_ERR_LE        0x02    /* Length Error */
+#define IXGBE_RXD_ERR_PE        0x08    /* Packet Error */
+#define IXGBE_RXD_ERR_OSE       0x10    /* Oversize Error */
+#define IXGBE_RXD_ERR_USE       0x20    /* Undersize Error */
+#define IXGBE_RXD_ERR_TCPE      0x40    /* TCP/UDP Checksum Error */
+#define IXGBE_RXD_ERR_IPE       0x80    /* IP Checksum Error */
+#define IXGBE_RXDADV_ERR_MASK           0xfff00000 /* RDESC.ERRORS mask */
+#define IXGBE_RXDADV_ERR_SHIFT          20         /* RDESC.ERRORS shift */
+#define IXGBE_RXDADV_ERR_OUTERIPER	0x04000000 /* CRC IP Header error */
+#define IXGBE_RXDADV_ERR_FCEOFE         0x80000000 /* FCoEFe/IPE */
+#define IXGBE_RXDADV_ERR_FCERR          0x00700000 /* FCERR/FDIRERR */
+#define IXGBE_RXDADV_ERR_FDIR_LEN       0x00100000 /* FDIR Length error */
+#define IXGBE_RXDADV_ERR_FDIR_DROP      0x00200000 /* FDIR Drop error */
+#define IXGBE_RXDADV_ERR_FDIR_COLL      0x00400000 /* FDIR Collision error */
+#define IXGBE_RXDADV_ERR_HBO    0x00800000 /*Header Buffer Overflow */
+#define IXGBE_RXDADV_ERR_CE     0x01000000 /* CRC Error */
+#define IXGBE_RXDADV_ERR_LE     0x02000000 /* Length Error */
+#define IXGBE_RXDADV_ERR_PE     0x08000000 /* Packet Error */
+#define IXGBE_RXDADV_ERR_OSE    0x10000000 /* Oversize Error */
+#define IXGBE_RXDADV_ERR_USE    0x20000000 /* Undersize Error */
+#define IXGBE_RXDADV_ERR_TCPE   0x40000000 /* TCP/UDP Checksum Error */
+#define IXGBE_RXDADV_ERR_IPE    0x80000000 /* IP Checksum Error */
+#define IXGBE_RXD_VLAN_ID_MASK  0x0FFF  /* VLAN ID is in lower 12 bits */
+#define IXGBE_RXD_PRI_MASK      0xE000  /* Priority is in upper 3 bits */
+#define IXGBE_RXD_PRI_SHIFT     13
+#define IXGBE_RXD_CFI_MASK      0x1000  /* CFI is bit 12 */
+#define IXGBE_RXD_CFI_SHIFT     12
+
+#define IXGBE_RXDADV_STAT_DD            IXGBE_RXD_STAT_DD  /* Done */
+#define IXGBE_RXDADV_STAT_EOP           IXGBE_RXD_STAT_EOP /* End of Packet */
+#define IXGBE_RXDADV_STAT_FLM           IXGBE_RXD_STAT_FLM /* FDir Match */
+#define IXGBE_RXDADV_STAT_VP            IXGBE_RXD_STAT_VP  /* IEEE VLAN Pkt */
+#define IXGBE_RXDADV_STAT_MASK          0x000fffff /* Stat/NEXTP: bit 0-19 */
+#define IXGBE_RXDADV_STAT_FCEOFS        0x00000040 /* FCoE EOF/SOF Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT        0x00000030 /* FCoE Pkt Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */
+#define IXGBE_RXDADV_STAT_FCSTAT_NODDP  0x00000010 /* 01: Ctxt w/o DDP */
+#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */
+#define IXGBE_RXDADV_STAT_FCSTAT_DDP    0x00000030 /* 11: Ctxt w/ DDP */
+#define IXGBE_RXDADV_STAT_TS		0x00010000 /* IEEE 1588 Time Stamp */
+
+/* PSRTYPE bit definitions */
+#define IXGBE_PSRTYPE_TCPHDR    0x00000010
+#define IXGBE_PSRTYPE_UDPHDR    0x00000020
+#define IXGBE_PSRTYPE_IPV4HDR   0x00000100
+#define IXGBE_PSRTYPE_IPV6HDR   0x00000200
+#define IXGBE_PSRTYPE_L2HDR     0x00001000
+
+/* SRRCTL bit definitions */
+#define IXGBE_SRRCTL_BSIZEPKT_SHIFT     10     /* so many KBs */
+#define IXGBE_SRRCTL_RDMTS_SHIFT        22
+#define IXGBE_SRRCTL_RDMTS_MASK         0x01C00000
+#define IXGBE_SRRCTL_DROP_EN            0x10000000
+#define IXGBE_SRRCTL_BSIZEPKT_MASK      0x0000007F
+#define IXGBE_SRRCTL_BSIZEHDR_MASK      0x00003F00
+#define IXGBE_SRRCTL_DESCTYPE_LEGACY    0x00000000
+#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT  0x04000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define IXGBE_SRRCTL_DESCTYPE_MASK      0x0E000000
+
+#define IXGBE_RXDPS_HDRSTAT_HDRSP       0x00008000
+#define IXGBE_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
+
+#define IXGBE_RXDADV_RSSTYPE_MASK       0x0000000F
+#define IXGBE_RXDADV_PKTTYPE_MASK       0x0000FFF0
+#define IXGBE_RXDADV_PKTTYPE_MASK_EX    0x0001FFF0
+#define IXGBE_RXDADV_HDRBUFLEN_MASK     0x00007FE0
+#define IXGBE_RXDADV_RSCCNT_MASK        0x001E0000
+#define IXGBE_RXDADV_RSCCNT_SHIFT       17
+#define IXGBE_RXDADV_HDRBUFLEN_SHIFT    5
+#define IXGBE_RXDADV_SPLITHEADER_EN     0x00001000
+#define IXGBE_RXDADV_SPH                0x8000
+
+/* RSS Hash results */
+#define IXGBE_RXDADV_RSSTYPE_NONE       0x00000000
+#define IXGBE_RXDADV_RSSTYPE_IPV4_TCP   0x00000001
+#define IXGBE_RXDADV_RSSTYPE_IPV4       0x00000002
+#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP   0x00000003
+#define IXGBE_RXDADV_RSSTYPE_IPV6_EX    0x00000004
+#define IXGBE_RXDADV_RSSTYPE_IPV6       0x00000005
+#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006
+#define IXGBE_RXDADV_RSSTYPE_IPV4_UDP   0x00000007
+#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP   0x00000008
+#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009
+
+/* RSS Packet Types as indicated in the receive descriptor. */
+#define IXGBE_RXDADV_PKTTYPE_NONE       0x00000000
+#define IXGBE_RXDADV_PKTTYPE_IPV4       0x00000010 /* IPv4 hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPV4_EX    0x00000020 /* IPv4 hdr + extensions */
+#define IXGBE_RXDADV_PKTTYPE_IPV6       0x00000040 /* IPv6 hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPV6_EX    0x00000080 /* IPv6 hdr + extensions */
+#define IXGBE_RXDADV_PKTTYPE_TCP        0x00000100 /* TCP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_UDP        0x00000200 /* UDP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_SCTP       0x00000400 /* SCTP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_NFS        0x00000800 /* NFS hdr present */
+#define IXGBE_RXDADV_PKTTYPE_VXLAN	0x00000800 /* VXLAN hdr present */
+#define IXGBE_RXDADV_PKTTYPE_TUNNEL	0x00010000 /* Tunnel type */
+#define IXGBE_RXDADV_PKTTYPE_IPSEC_ESP  0x00001000 /* IPSec ESP */
+#define IXGBE_RXDADV_PKTTYPE_IPSEC_AH   0x00002000 /* IPSec AH */
+#define IXGBE_RXDADV_PKTTYPE_LINKSEC    0x00004000 /* LinkSec Encap */
+#define IXGBE_RXDADV_PKTTYPE_ETQF       0x00008000 /* PKTTYPE is ETQF index */
+#define IXGBE_RXDADV_PKTTYPE_ETQF_MASK  0x00000070 /* ETQF has 8 indices */
+#define IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT 4          /* Right-shift 4 bits */
+
+/* Security Processing bit Indication */
+#define IXGBE_RXDADV_LNKSEC_STATUS_SECP         0x00020000
+#define IXGBE_RXDADV_LNKSEC_ERROR_NO_SA_MATCH   0x08000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_REPLAY_ERROR  0x10000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_BIT_MASK      0x18000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG       0x18000000
+
+/* Masks to determine if packets should be dropped due to frame errors */
+#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \
+				      IXGBE_RXD_ERR_CE | \
+				      IXGBE_RXD_ERR_LE | \
+				      IXGBE_RXD_ERR_PE | \
+				      IXGBE_RXD_ERR_OSE | \
+				      IXGBE_RXD_ERR_USE)
+
+#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \
+				      IXGBE_RXDADV_ERR_CE | \
+				      IXGBE_RXDADV_ERR_LE | \
+				      IXGBE_RXDADV_ERR_PE | \
+				      IXGBE_RXDADV_ERR_OSE | \
+				      IXGBE_RXDADV_ERR_USE)
+
+/* Multicast bit mask */
+#define IXGBE_MCSTCTRL_MFE      0x4
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE  8
+#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE  8
+#define IXGBE_REQ_TX_BUFFER_GRANULARITY   1024
+
+/* Vlan-specific macros */
+#define IXGBE_RX_DESC_SPECIAL_VLAN_MASK  0x0FFF /* VLAN ID in lower 12 bits */
+#define IXGBE_RX_DESC_SPECIAL_PRI_MASK   0xE000 /* Priority in upper 3 bits */
+#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT  0x000D /* Priority in upper 3 of 16 */
+#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT  IXGBE_RX_DESC_SPECIAL_PRI_SHIFT
+
+/* SR-IOV specific macros */
+#define IXGBE_MBVFICR_INDEX(vf_number)   (vf_number >> 4)
+#define IXGBE_MBVFICR(_i)		(0x00710 + ((_i) * 4))
+#define IXGBE_VFLRE(_i)		((((_i) & 1) ? 0x001C0 : 0x00600))
+#define IXGBE_VFLREC(_i)		(0x00700 + ((_i) * 4))
+/* Translated register #defines */
+#define IXGBE_PVFTDH(P)		(0x06010 + (0x40 * (P)))
+#define IXGBE_PVFTDT(P)		(0x06018 + (0x40 * (P)))
+#define IXGBE_PVFTDWBAL(P)	(0x06038 + (0x40 * (P)))
+#define IXGBE_PVFTDWBAH(P)	(0x0603C + (0x40 * (P)))
+
+#define IXGBE_PVFTDWBALn(q_per_pool, vf_number, vf_q_index) \
+		(IXGBE_PVFTDWBAL((q_per_pool)*(vf_number) + (vf_q_index)))
+#define IXGBE_PVFTDWBAHn(q_per_pool, vf_number, vf_q_index) \
+		(IXGBE_PVFTDWBAH((q_per_pool)*(vf_number) + (vf_q_index)))
+
+#define IXGBE_PVFTDHN(q_per_pool, vf_number, vf_q_index) \
+		(IXGBE_PVFTDH((q_per_pool)*(vf_number) + (vf_q_index)))
+#define IXGBE_PVFTDTN(q_per_pool, vf_number, vf_q_index) \
+		(IXGBE_PVFTDT((q_per_pool)*(vf_number) + (vf_q_index)))
+
+enum ixgbe_fdir_pballoc_type {
+	IXGBE_FDIR_PBALLOC_NONE = 0,
+	IXGBE_FDIR_PBALLOC_64K  = 1,
+	IXGBE_FDIR_PBALLOC_128K = 2,
+	IXGBE_FDIR_PBALLOC_256K = 3,
+};
+#define IXGBE_FDIR_PBALLOC_SIZE_SHIFT           16
+
+/* Flow Director register values */
+#define IXGBE_FDIRCTRL_PBALLOC_64K              0x00000001
+#define IXGBE_FDIRCTRL_PBALLOC_128K             0x00000002
+#define IXGBE_FDIRCTRL_PBALLOC_256K             0x00000003
+#define IXGBE_FDIRCTRL_INIT_DONE                0x00000008
+#define IXGBE_FDIRCTRL_PERFECT_MATCH            0x00000010
+#define IXGBE_FDIRCTRL_REPORT_STATUS            0x00000020
+#define IXGBE_FDIRCTRL_REPORT_STATUS_ALWAYS     0x00000080
+#define IXGBE_FDIRCTRL_DROP_Q_SHIFT             8
+#define IXGBE_FDIRCTRL_FLEX_SHIFT               16
+#define IXGBE_FDIRCTRL_SEARCHLIM                0x00800000
+#define IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT         24
+#define IXGBE_FDIRCTRL_FULL_THRESH_MASK         0xF0000000
+#define IXGBE_FDIRCTRL_FULL_THRESH_SHIFT        28
+
+#define IXGBE_FDIRTCPM_DPORTM_SHIFT             16
+#define IXGBE_FDIRUDPM_DPORTM_SHIFT             16
+#define IXGBE_FDIRIP6M_DIPM_SHIFT               16
+#define IXGBE_FDIRM_VLANID                      0x00000001
+#define IXGBE_FDIRM_VLANP                       0x00000002
+#define IXGBE_FDIRM_POOL                        0x00000004
+#define IXGBE_FDIRM_L4P                         0x00000008
+#define IXGBE_FDIRM_FLEX                        0x00000010
+#define IXGBE_FDIRM_DIPv6                       0x00000020
+
+#define IXGBE_FDIRFREE_FREE_MASK                0xFFFF
+#define IXGBE_FDIRFREE_FREE_SHIFT               0
+#define IXGBE_FDIRFREE_COLL_MASK                0x7FFF0000
+#define IXGBE_FDIRFREE_COLL_SHIFT               16
+#define IXGBE_FDIRLEN_MAXLEN_MASK               0x3F
+#define IXGBE_FDIRLEN_MAXLEN_SHIFT              0
+#define IXGBE_FDIRLEN_MAXHASH_MASK              0x7FFF0000
+#define IXGBE_FDIRLEN_MAXHASH_SHIFT             16
+#define IXGBE_FDIRUSTAT_ADD_MASK                0xFFFF
+#define IXGBE_FDIRUSTAT_ADD_SHIFT               0
+#define IXGBE_FDIRUSTAT_REMOVE_MASK             0xFFFF0000
+#define IXGBE_FDIRUSTAT_REMOVE_SHIFT            16
+#define IXGBE_FDIRFSTAT_FADD_MASK               0x00FF
+#define IXGBE_FDIRFSTAT_FADD_SHIFT              0
+#define IXGBE_FDIRFSTAT_FREMOVE_MASK            0xFF00
+#define IXGBE_FDIRFSTAT_FREMOVE_SHIFT           8
+#define IXGBE_FDIRPORT_DESTINATION_SHIFT        16
+#define IXGBE_FDIRVLAN_FLEX_SHIFT               16
+#define IXGBE_FDIRHASH_BUCKET_VALID_SHIFT       15
+#define IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT       16
+
+#define IXGBE_FDIRCMD_CMD_MASK                  0x00000003
+#define IXGBE_FDIRCMD_CMD_ADD_FLOW              0x00000001
+#define IXGBE_FDIRCMD_CMD_REMOVE_FLOW           0x00000002
+#define IXGBE_FDIRCMD_CMD_QUERY_REM_FILT        0x00000003
+#define IXGBE_FDIRCMD_FILTER_VALID              0x00000004
+#define IXGBE_FDIRCMD_FILTER_UPDATE             0x00000008
+#define IXGBE_FDIRCMD_IPv6DMATCH                0x00000010
+#define IXGBE_FDIRCMD_L4TYPE_UDP                0x00000020
+#define IXGBE_FDIRCMD_L4TYPE_TCP                0x00000040
+#define IXGBE_FDIRCMD_L4TYPE_SCTP               0x00000060
+#define IXGBE_FDIRCMD_IPV6                      0x00000080
+#define IXGBE_FDIRCMD_CLEARHT                   0x00000100
+#define IXGBE_FDIRCMD_DROP                      0x00000200
+#define IXGBE_FDIRCMD_INT                       0x00000400
+#define IXGBE_FDIRCMD_LAST                      0x00000800
+#define IXGBE_FDIRCMD_COLLISION                 0x00001000
+#define IXGBE_FDIRCMD_QUEUE_EN                  0x00008000
+#define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT           5
+#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT            16
+#define IXGBE_FDIRCMD_VT_POOL_SHIFT             24
+#define IXGBE_FDIR_INIT_DONE_POLL               10
+#define IXGBE_FDIRCMD_CMD_POLL                  10
+
+#define IXGBE_FDIR_DROP_QUEUE                   127
+
+/* Manageablility Host Interface defines */
+#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH	1792 /* Num of bytes in range */
+#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH	448 /* Num of dwords in range */
+#define IXGBE_HI_COMMAND_TIMEOUT	500 /* Process HI command limit */
+#define IXGBE_HI_FLASH_ERASE_TIMEOUT	1000 /* Process Erase command limit */
+#define IXGBE_HI_FLASH_UPDATE_TIMEOUT	5000 /* Process Update command limit */
+#define IXGBE_HI_FLASH_APPLY_TIMEOUT	0 /* Process Apply command limit */
+
+/* CEM Support */
+#define FW_CEM_HDR_LEN			0x4
+#define FW_CEM_CMD_DRIVER_INFO		0xDD
+#define FW_CEM_CMD_DRIVER_INFO_LEN	0x5
+#define FW_CEM_CMD_RESERVED		0x0
+#define FW_CEM_UNUSED_VER		0x0
+#define FW_CEM_MAX_RETRIES		3
+#define FW_CEM_RESP_STATUS_SUCCESS	0x1
+#define FW_READ_SHADOW_RAM_CMD		0x31
+#define FW_READ_SHADOW_RAM_LEN		0x6
+#define FW_WRITE_SHADOW_RAM_CMD		0x33
+#define FW_WRITE_SHADOW_RAM_LEN		0xA /* 8 plus 1 WORD to write */
+#define FW_SHADOW_RAM_DUMP_CMD		0x36
+#define FW_SHADOW_RAM_DUMP_LEN		0
+#define FW_DEFAULT_CHECKSUM		0xFF /* checksum always 0xFF */
+#define FW_NVM_DATA_OFFSET		3
+#define FW_MAX_READ_BUFFER_SIZE		1024
+#define FW_DISABLE_RXEN_CMD		0xDE
+#define FW_DISABLE_RXEN_LEN		0x1
+
+/* Host Interface Command Structures */
+struct ixgbe_hic_hdr {
+	u8 cmd;
+	u8 buf_len;
+	union {
+		u8 cmd_resv;
+		u8 ret_status;
+	} cmd_or_resp;
+	u8 checksum;
+};
+
+struct ixgbe_hic_hdr2_req {
+	u8 cmd;
+	u8 buf_lenh;
+	u8 buf_lenl;
+	u8 checksum;
+};
+
+struct ixgbe_hic_hdr2_rsp {
+	u8 cmd;
+	u8 buf_lenl;
+	u8 buf_lenh_status;     /* 7-5: high bits of buf_len, 4-0: status */
+	u8 checksum;
+};
+
+union ixgbe_hic_hdr2 {
+	struct ixgbe_hic_hdr2_req req;
+	struct ixgbe_hic_hdr2_rsp rsp;
+};
+
+struct ixgbe_hic_drv_info {
+	struct ixgbe_hic_hdr hdr;
+	u8 port_num;
+	u8 ver_sub;
+	u8 ver_build;
+	u8 ver_min;
+	u8 ver_maj;
+	u8 pad; /* end spacing to ensure length is mult. of dword */
+	u16 pad2; /* end spacing to ensure length is mult. of dword2 */
+};
+
+/* These need to be dword aligned */
+struct ixgbe_hic_read_shadow_ram {
+	union ixgbe_hic_hdr2 hdr;
+	u32 address;
+	u16 length;
+	u16 pad2;
+	u16 data;
+	u16 pad3;
+};
+
+struct ixgbe_hic_write_shadow_ram {
+	union ixgbe_hic_hdr2 hdr;
+	__be32 address;
+	__be16 length;
+	u16 pad2;
+	u16 data;
+	u16 pad3;
+};
+
+struct ixgbe_hic_disable_rxen {
+	struct ixgbe_hic_hdr hdr;
+	u8  port_number;
+	u8  pad2;
+	u16 pad3;
+};
+
+/* Transmit Descriptor - Advanced */
+union ixgbe_adv_tx_desc {
+	struct {
+		__le64 buffer_addr;      /* Address of descriptor's data buf */
+		__le32 cmd_type_len;
+		__le32 olinfo_status;
+	} read;
+	struct {
+		__le64 rsvd;       /* Reserved */
+		__le32 nxtseq_seed;
+		__le32 status;
+	} wb;
+};
+
+/* Receive Descriptor - Advanced */
+union ixgbe_adv_rx_desc {
+	struct {
+		__le64 pkt_addr; /* Packet buffer address */
+		__le64 hdr_addr; /* Header buffer address */
+	} read;
+	struct {
+		struct {
+			union {
+				__le32 data;
+				struct {
+					__le16 pkt_info; /* RSS, Pkt type */
+					__le16 hdr_info; /* Splithdr, hdrlen */
+				} hs_rss;
+			} lo_dword;
+			union {
+				__le32 rss; /* RSS Hash */
+				struct {
+					__le16 ip_id; /* IP id */
+					__le16 csum; /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			__le32 status_error; /* ext status/error */
+			__le16 length; /* Packet length */
+			__le16 vlan; /* VLAN tag */
+		} upper;
+	} wb;  /* writeback */
+};
+
+/* Context descriptors */
+struct ixgbe_adv_tx_context_desc {
+	__le32 vlan_macip_lens;
+	__le32 seqnum_seed;
+	__le32 type_tucmd_mlhl;
+	__le32 mss_l4len_idx;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define IXGBE_ADVTXD_DTALEN_MASK      0x0000FFFF /* Data buf length(bytes) */
+#define IXGBE_ADVTXD_MAC_LINKSEC      0x00040000 /* Insert LinkSec */
+#define IXGBE_ADVTXD_MAC_TSTAMP	      0x00080000 /* IEEE 1588 Time Stamp */
+#define IXGBE_ADVTXD_IPSEC_SA_INDEX_MASK   0x000003FF /* IPSec SA index */
+#define IXGBE_ADVTXD_IPSEC_ESP_LEN_MASK    0x000001FF /* IPSec ESP length */
+#define IXGBE_ADVTXD_DTYP_MASK  0x00F00000 /* DTYP mask */
+#define IXGBE_ADVTXD_DTYP_CTXT  0x00200000 /* Advanced Context Desc */
+#define IXGBE_ADVTXD_DTYP_DATA  0x00300000 /* Advanced Data Descriptor */
+#define IXGBE_ADVTXD_DCMD_EOP   IXGBE_TXD_CMD_EOP  /* End of Packet */
+#define IXGBE_ADVTXD_DCMD_IFCS  IXGBE_TXD_CMD_IFCS /* Insert FCS */
+#define IXGBE_ADVTXD_DCMD_RS    IXGBE_TXD_CMD_RS   /* Report Status */
+#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000    /* DDP hdr type or iSCSI */
+#define IXGBE_ADVTXD_DCMD_DEXT  IXGBE_TXD_CMD_DEXT /* Desc ext (1=Adv) */
+#define IXGBE_ADVTXD_DCMD_VLE   IXGBE_TXD_CMD_VLE  /* VLAN pkt enable */
+#define IXGBE_ADVTXD_DCMD_TSE   0x80000000 /* TCP Seg enable */
+#define IXGBE_ADVTXD_STAT_DD    IXGBE_TXD_STAT_DD  /* Descriptor Done */
+#define IXGBE_ADVTXD_STAT_SN_CRC      0x00000002 /* NXTSEQ/SEED pres in WB */
+#define IXGBE_ADVTXD_STAT_RSV   0x0000000C /* STA Reserved */
+#define IXGBE_ADVTXD_IDX_SHIFT  4 /* Adv desc Index shift */
+#define IXGBE_ADVTXD_CC         0x00000080 /* Check Context */
+#define IXGBE_ADVTXD_POPTS_SHIFT      8  /* Adv desc POPTS shift */
+#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \
+				 IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \
+				 IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_ISCO_1ST  0x00000000 /* 1st TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_MDL  0x00000800 /* Middle TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_FULL 0x00001800 /* 1st&Last TSO-full iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_RSV       0x00002000 /* POPTS Reserved */
+#define IXGBE_ADVTXD_PAYLEN_SHIFT    14 /* Adv desc PAYLEN shift */
+#define IXGBE_ADVTXD_MACLEN_SHIFT    9  /* Adv ctxt desc mac len shift */
+#define IXGBE_ADVTXD_VLAN_SHIFT      16  /* Adv ctxt vlan tag shift */
+#define IXGBE_ADVTXD_TUCMD_IPV4      0x00000400  /* IP Packet Type: 1=IPv4 */
+#define IXGBE_ADVTXD_TUCMD_IPV6      0x00000000  /* IP Packet Type: 0=IPv6 */
+#define IXGBE_ADVTXD_TUCMD_L4T_UDP   0x00000000  /* L4 Packet TYPE of UDP */
+#define IXGBE_ADVTXD_TUCMD_L4T_TCP   0x00000800  /* L4 Packet TYPE of TCP */
+#define IXGBE_ADVTXD_TUCMD_L4T_SCTP  0x00001000  /* L4 Packet TYPE of SCTP */
+#define IXGBE_ADVTXD_TUCMD_MKRREQ    0x00002000 /*Req requires Markers and CRC*/
+#define IXGBE_ADVTXD_POPTS_IPSEC      0x00000400 /* IPSec offload request */
+#define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */
+#define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */
+#define IXGBE_ADVTXT_TUCMD_FCOE      0x00008000       /* FCoE Frame Type */
+#define IXGBE_ADVTXD_FCOEF_EOF_MASK  (0x3 << 10)      /* FC EOF index */
+#define IXGBE_ADVTXD_FCOEF_SOF       ((1 << 2) << 10) /* FC SOF index */
+#define IXGBE_ADVTXD_FCOEF_PARINC    ((1 << 3) << 10) /* Rel_Off in F_CTL */
+#define IXGBE_ADVTXD_FCOEF_ORIE      ((1 << 4) << 10) /* Orientation: End */
+#define IXGBE_ADVTXD_FCOEF_ORIS      ((1 << 5) << 10) /* Orientation: Start */
+#define IXGBE_ADVTXD_FCOEF_EOF_N     (0x0 << 10)      /* 00: EOFn */
+#define IXGBE_ADVTXD_FCOEF_EOF_T     (0x1 << 10)      /* 01: EOFt */
+#define IXGBE_ADVTXD_FCOEF_EOF_NI    (0x2 << 10)      /* 10: EOFni */
+#define IXGBE_ADVTXD_FCOEF_EOF_A     (0x3 << 10)      /* 11: EOFa */
+#define IXGBE_ADVTXD_L4LEN_SHIFT     8  /* Adv ctxt L4LEN shift */
+#define IXGBE_ADVTXD_MSS_SHIFT       16  /* Adv ctxt MSS shift */
+
+/* Autonegotiation advertised speeds */
+typedef u32 ixgbe_autoneg_advertised;
+/* Link speed */
+typedef u32 ixgbe_link_speed;
+#define IXGBE_LINK_SPEED_UNKNOWN	0
+#define IXGBE_LINK_SPEED_100_FULL	0x0008
+#define IXGBE_LINK_SPEED_1GB_FULL	0x0020
+#define IXGBE_LINK_SPEED_2_5GB_FULL	0x0400
+#define IXGBE_LINK_SPEED_5GB_FULL	0x0800
+#define IXGBE_LINK_SPEED_10GB_FULL	0x0080
+#define IXGBE_LINK_SPEED_82598_AUTONEG (IXGBE_LINK_SPEED_1GB_FULL | \
+					IXGBE_LINK_SPEED_10GB_FULL)
+#define IXGBE_LINK_SPEED_82599_AUTONEG (IXGBE_LINK_SPEED_100_FULL | \
+					IXGBE_LINK_SPEED_1GB_FULL | \
+					IXGBE_LINK_SPEED_10GB_FULL)
+
+/* Flow Control Data Sheet defined values
+ * Calculation and defines taken from 802.1bb Annex O
+ */
+
+/* BitTimes (BT) conversion */
+#define IXGBE_BT2KB(BT) ((BT + (8 * 1024 - 1)) / (8 * 1024))
+#define IXGBE_B2BT(BT) (BT * 8)
+
+/* Calculate Delay to respond to PFC */
+#define IXGBE_PFC_D	672
+
+/* Calculate Cable Delay */
+#define IXGBE_CABLE_DC	5556 /* Delay Copper */
+#define IXGBE_CABLE_DO	5000 /* Delay Optical */
+
+/* Calculate Interface Delay X540 */
+#define IXGBE_PHY_DC	25600	/* Delay 10G BASET */
+#define IXGBE_MAC_DC	8192	/* Delay Copper XAUI interface */
+#define IXGBE_XAUI_DC	(2 * 2048) /* Delay Copper Phy */
+
+#define IXGBE_ID_X540	(IXGBE_MAC_DC + IXGBE_XAUI_DC + IXGBE_PHY_DC)
+
+/* Calculate Interface Delay 82598, 82599 */
+#define IXGBE_PHY_D	12800
+#define IXGBE_MAC_D	4096
+#define IXGBE_XAUI_D	(2 * 1024)
+
+#define IXGBE_ID	(IXGBE_MAC_D + IXGBE_XAUI_D + IXGBE_PHY_D)
+
+/* Calculate Delay incurred from higher layer */
+#define IXGBE_HD	6144
+
+/* Calculate PCI Bus delay for low thresholds */
+#define IXGBE_PCI_DELAY	10000
+
+/* Calculate X540 delay value in bit times */
+#define IXGBE_DV_X540(_max_frame_link, _max_frame_tc) \
+			((36 * \
+			  (IXGBE_B2BT(_max_frame_link) + \
+			   IXGBE_PFC_D + \
+			   (2 * IXGBE_CABLE_DC) + \
+			   (2 * IXGBE_ID_X540) + \
+			   IXGBE_HD) / 25 + 1) + \
+			 2 * IXGBE_B2BT(_max_frame_tc))
+
+/* Calculate 82599, 82598 delay value in bit times */
+#define IXGBE_DV(_max_frame_link, _max_frame_tc) \
+			((36 * \
+			  (IXGBE_B2BT(_max_frame_link) + \
+			   IXGBE_PFC_D + \
+			   (2 * IXGBE_CABLE_DC) + \
+			   (2 * IXGBE_ID) + \
+			   IXGBE_HD) / 25 + 1) + \
+			 2 * IXGBE_B2BT(_max_frame_tc))
+
+/* Calculate low threshold delay values */
+#define IXGBE_LOW_DV_X540(_max_frame_tc) \
+			(2 * IXGBE_B2BT(_max_frame_tc) + \
+			(36 * IXGBE_PCI_DELAY / 25) + 1)
+#define IXGBE_LOW_DV(_max_frame_tc) \
+			(2 * IXGBE_LOW_DV_X540(_max_frame_tc))
+
+/* Software ATR hash keys */
+#define IXGBE_ATR_BUCKET_HASH_KEY    0x3DAD14E2
+#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614
+
+/* Software ATR input stream values and masks */
+#define IXGBE_ATR_HASH_MASK     0x7fff
+#define IXGBE_ATR_L4TYPE_MASK      0x3
+#define IXGBE_ATR_L4TYPE_UDP       0x1
+#define IXGBE_ATR_L4TYPE_TCP       0x2
+#define IXGBE_ATR_L4TYPE_SCTP      0x3
+#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4
+enum ixgbe_atr_flow_type {
+	IXGBE_ATR_FLOW_TYPE_IPV4   = 0x0,
+	IXGBE_ATR_FLOW_TYPE_UDPV4  = 0x1,
+	IXGBE_ATR_FLOW_TYPE_TCPV4  = 0x2,
+	IXGBE_ATR_FLOW_TYPE_SCTPV4 = 0x3,
+	IXGBE_ATR_FLOW_TYPE_IPV6   = 0x4,
+	IXGBE_ATR_FLOW_TYPE_UDPV6  = 0x5,
+	IXGBE_ATR_FLOW_TYPE_TCPV6  = 0x6,
+	IXGBE_ATR_FLOW_TYPE_SCTPV6 = 0x7,
+};
+
+/* Flow Director ATR input struct. */
+union ixgbe_atr_input {
+	/*
+	 * Byte layout in order, all values with MSB first:
+	 *
+	 * vm_pool    - 1 byte
+	 * flow_type  - 1 byte
+	 * vlan_id    - 2 bytes
+	 * src_ip     - 16 bytes
+	 * dst_ip     - 16 bytes
+	 * src_port   - 2 bytes
+	 * dst_port   - 2 bytes
+	 * flex_bytes - 2 bytes
+	 * bkt_hash   - 2 bytes
+	 */
+	struct {
+		u8     vm_pool;
+		u8     flow_type;
+		__be16 vlan_id;
+		__be32 dst_ip[4];
+		__be32 src_ip[4];
+		__be16 src_port;
+		__be16 dst_port;
+		__be16 flex_bytes;
+		__be16 bkt_hash;
+	} formatted;
+	__be32 dword_stream[11];
+};
+
+/* Flow Director compressed ATR hash input struct */
+union ixgbe_atr_hash_dword {
+	struct {
+		u8 vm_pool;
+		u8 flow_type;
+		__be16 vlan_id;
+	} formatted;
+	__be32 ip;
+	struct {
+		__be16 src;
+		__be16 dst;
+	} port;
+	__be16 flex_bytes;
+	__be32 dword;
+};
+
+enum ixgbe_eeprom_type {
+	ixgbe_eeprom_uninitialized = 0,
+	ixgbe_eeprom_spi,
+	ixgbe_flash,
+	ixgbe_eeprom_none /* No NVM support */
+};
+
+enum ixgbe_mac_type {
+	ixgbe_mac_unknown = 0,
+	ixgbe_mac_82598EB,
+	ixgbe_mac_82599EB,
+	ixgbe_mac_X540,
+	ixgbe_mac_X550,
+	ixgbe_mac_X550EM_x,
+	ixgbe_num_macs
+};
+
+enum ixgbe_phy_type {
+	ixgbe_phy_unknown = 0,
+	ixgbe_phy_none,
+	ixgbe_phy_tn,
+	ixgbe_phy_aq,
+	ixgbe_phy_x550em_kr,
+	ixgbe_phy_x550em_kx4,
+	ixgbe_phy_x550em_ext_t,
+	ixgbe_phy_cu_unknown,
+	ixgbe_phy_qt,
+	ixgbe_phy_xaui,
+	ixgbe_phy_nl,
+	ixgbe_phy_sfp_passive_tyco,
+	ixgbe_phy_sfp_passive_unknown,
+	ixgbe_phy_sfp_active_unknown,
+	ixgbe_phy_sfp_avago,
+	ixgbe_phy_sfp_ftl,
+	ixgbe_phy_sfp_ftl_active,
+	ixgbe_phy_sfp_unknown,
+	ixgbe_phy_sfp_intel,
+	ixgbe_phy_qsfp_passive_unknown,
+	ixgbe_phy_qsfp_active_unknown,
+	ixgbe_phy_qsfp_intel,
+	ixgbe_phy_qsfp_unknown,
+	ixgbe_phy_sfp_unsupported,
+	ixgbe_phy_generic
+};
+
+/*
+ * SFP+ module type IDs:
+ *
+ * ID   Module Type
+ * =============
+ * 0    SFP_DA_CU
+ * 1    SFP_SR
+ * 2    SFP_LR
+ * 3    SFP_DA_CU_CORE0 - 82599-specific
+ * 4    SFP_DA_CU_CORE1 - 82599-specific
+ * 5    SFP_SR/LR_CORE0 - 82599-specific
+ * 6    SFP_SR/LR_CORE1 - 82599-specific
+ */
+enum ixgbe_sfp_type {
+	ixgbe_sfp_type_da_cu = 0,
+	ixgbe_sfp_type_sr = 1,
+	ixgbe_sfp_type_lr = 2,
+	ixgbe_sfp_type_da_cu_core0 = 3,
+	ixgbe_sfp_type_da_cu_core1 = 4,
+	ixgbe_sfp_type_srlr_core0 = 5,
+	ixgbe_sfp_type_srlr_core1 = 6,
+	ixgbe_sfp_type_da_act_lmt_core0 = 7,
+	ixgbe_sfp_type_da_act_lmt_core1 = 8,
+	ixgbe_sfp_type_1g_cu_core0 = 9,
+	ixgbe_sfp_type_1g_cu_core1 = 10,
+	ixgbe_sfp_type_1g_sx_core0 = 11,
+	ixgbe_sfp_type_1g_sx_core1 = 12,
+	ixgbe_sfp_type_1g_lx_core0 = 13,
+	ixgbe_sfp_type_1g_lx_core1 = 14,
+	ixgbe_sfp_type_not_present = 0xFFFE,
+	ixgbe_sfp_type_unknown = 0xFFFF
+};
+
+enum ixgbe_media_type {
+	ixgbe_media_type_unknown = 0,
+	ixgbe_media_type_fiber,
+	ixgbe_media_type_fiber_qsfp,
+	ixgbe_media_type_fiber_lco,
+	ixgbe_media_type_copper,
+	ixgbe_media_type_backplane,
+	ixgbe_media_type_cx4,
+	ixgbe_media_type_virtual
+};
+
+/* Flow Control Settings */
+enum ixgbe_fc_mode {
+	ixgbe_fc_none = 0,
+	ixgbe_fc_rx_pause,
+	ixgbe_fc_tx_pause,
+	ixgbe_fc_full,
+	ixgbe_fc_default
+};
+
+/* Smart Speed Settings */
+#define IXGBE_SMARTSPEED_MAX_RETRIES	3
+enum ixgbe_smart_speed {
+	ixgbe_smart_speed_auto = 0,
+	ixgbe_smart_speed_on,
+	ixgbe_smart_speed_off
+};
+
+/* PCI bus types */
+enum ixgbe_bus_type {
+	ixgbe_bus_type_unknown = 0,
+	ixgbe_bus_type_pci,
+	ixgbe_bus_type_pcix,
+	ixgbe_bus_type_pci_express,
+	ixgbe_bus_type_reserved
+};
+
+/* PCI bus speeds */
+enum ixgbe_bus_speed {
+	ixgbe_bus_speed_unknown = 0,
+	ixgbe_bus_speed_33      = 33,
+	ixgbe_bus_speed_66      = 66,
+	ixgbe_bus_speed_100     = 100,
+	ixgbe_bus_speed_120     = 120,
+	ixgbe_bus_speed_133     = 133,
+	ixgbe_bus_speed_2500    = 2500,
+	ixgbe_bus_speed_5000    = 5000,
+	ixgbe_bus_speed_8000    = 8000,
+	ixgbe_bus_speed_reserved
+};
+
+/* PCI bus widths */
+enum ixgbe_bus_width {
+	ixgbe_bus_width_unknown = 0,
+	ixgbe_bus_width_pcie_x1 = 1,
+	ixgbe_bus_width_pcie_x2 = 2,
+	ixgbe_bus_width_pcie_x4 = 4,
+	ixgbe_bus_width_pcie_x8 = 8,
+	ixgbe_bus_width_32      = 32,
+	ixgbe_bus_width_64      = 64,
+	ixgbe_bus_width_reserved
+};
+
+struct ixgbe_addr_filter_info {
+	u32 num_mc_addrs;
+	u32 rar_used_count;
+	u32 mta_in_use;
+	u32 overflow_promisc;
+	bool uc_set_promisc;
+	bool user_set_promisc;
+};
+
+/* Bus parameters */
+struct ixgbe_bus_info {
+	enum ixgbe_bus_speed speed;
+	enum ixgbe_bus_width width;
+	enum ixgbe_bus_type type;
+
+	u16 func;
+	u16 lan_id;
+};
+
+/* Flow control parameters */
+struct ixgbe_fc_info {
+	u32 high_water[MAX_TRAFFIC_CLASS]; /* Flow Control High-water */
+	u32 low_water[MAX_TRAFFIC_CLASS]; /* Flow Control Low-water */
+	u16 pause_time; /* Flow Control Pause timer */
+	bool send_xon; /* Flow control send XON */
+	bool strict_ieee; /* Strict IEEE mode */
+	bool disable_fc_autoneg; /* Do not autonegotiate FC */
+	bool fc_was_autonegged; /* Is current_mode the result of autonegging? */
+	enum ixgbe_fc_mode current_mode; /* FC mode in effect */
+	enum ixgbe_fc_mode requested_mode; /* FC mode requested by caller */
+};
+
+/* Statistics counters collected by the MAC */
+struct ixgbe_hw_stats {
+	u64 crcerrs;
+	u64 illerrc;
+	u64 errbc;
+	u64 mspdc;
+	u64 mpctotal;
+	u64 mpc[8];
+	u64 mlfc;
+	u64 mrfc;
+	u64 rlec;
+	u64 lxontxc;
+	u64 lxonrxc;
+	u64 lxofftxc;
+	u64 lxoffrxc;
+	u64 pxontxc[8];
+	u64 pxonrxc[8];
+	u64 pxofftxc[8];
+	u64 pxoffrxc[8];
+	u64 prc64;
+	u64 prc127;
+	u64 prc255;
+	u64 prc511;
+	u64 prc1023;
+	u64 prc1522;
+	u64 gprc;
+	u64 bprc;
+	u64 mprc;
+	u64 gptc;
+	u64 gorc;
+	u64 gotc;
+	u64 rnbc[8];
+	u64 ruc;
+	u64 rfc;
+	u64 roc;
+	u64 rjc;
+	u64 mngprc;
+	u64 mngpdc;
+	u64 mngptc;
+	u64 tor;
+	u64 tpr;
+	u64 tpt;
+	u64 ptc64;
+	u64 ptc127;
+	u64 ptc255;
+	u64 ptc511;
+	u64 ptc1023;
+	u64 ptc1522;
+	u64 mptc;
+	u64 bptc;
+	u64 xec;
+	u64 rqsmr[16];
+	u64 tqsmr[8];
+	u64 qprc[16];
+	u64 qptc[16];
+	u64 qbrc[16];
+	u64 qbtc[16];
+	u64 qprdc[16];
+	u64 pxon2offc[8];
+	u64 fdirustat_add;
+	u64 fdirustat_remove;
+	u64 fdirfstat_fadd;
+	u64 fdirfstat_fremove;
+	u64 fdirmatch;
+	u64 fdirmiss;
+	u64 fccrc;
+	u64 fcoerpdc;
+	u64 fcoeprc;
+	u64 fcoeptc;
+	u64 fcoedwrc;
+	u64 fcoedwtc;
+	u64 fcoe_noddp;
+	u64 fcoe_noddp_ext_buff;
+	u64 b2ospc;
+	u64 b2ogprc;
+	u64 o2bgptc;
+	u64 o2bspc;
+};
+
+/* forward declaration */
+struct ixgbe_hw;
+
+/* iterator type for walking multicast address lists */
+typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
+				  u32 *vmdq);
+
+/* Function pointer table */
+struct ixgbe_eeprom_operations {
+	s32 (*init_params)(struct ixgbe_hw *);
+	s32 (*read)(struct ixgbe_hw *, u16, u16 *);
+	s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
+	s32 (*write)(struct ixgbe_hw *, u16, u16);
+	s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
+	s32 (*validate_checksum)(struct ixgbe_hw *, u16 *);
+	s32 (*update_checksum)(struct ixgbe_hw *);
+	s32 (*calc_checksum)(struct ixgbe_hw *);
+};
+
+struct ixgbe_mac_operations {
+	s32 (*init_hw)(struct ixgbe_hw *);
+	s32 (*reset_hw)(struct ixgbe_hw *);
+	s32 (*start_hw)(struct ixgbe_hw *);
+	s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
+	enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
+	s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
+	s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *);
+	s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
+	s32 (*get_wwn_prefix)(struct ixgbe_hw *, u16 *, u16 *);
+	s32 (*stop_adapter)(struct ixgbe_hw *);
+	s32 (*get_bus_info)(struct ixgbe_hw *);
+	void (*set_lan_id)(struct ixgbe_hw *);
+	s32 (*read_analog_reg8)(struct ixgbe_hw*, u32, u8*);
+	s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8);
+	s32 (*setup_sfp)(struct ixgbe_hw *);
+	s32 (*disable_rx_buff)(struct ixgbe_hw *);
+	s32 (*enable_rx_buff)(struct ixgbe_hw *);
+	s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
+	s32 (*acquire_swfw_sync)(struct ixgbe_hw *, u32);
+	void (*release_swfw_sync)(struct ixgbe_hw *, u32);
+	s32 (*prot_autoc_read)(struct ixgbe_hw *, bool *, u32 *);
+	s32 (*prot_autoc_write)(struct ixgbe_hw *, u32, bool);
+
+	/* Link */
+	void (*disable_tx_laser)(struct ixgbe_hw *);
+	void (*enable_tx_laser)(struct ixgbe_hw *);
+	void (*flap_tx_laser)(struct ixgbe_hw *);
+	void (*stop_link_on_d3)(struct ixgbe_hw *);
+	s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool);
+	s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
+	s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
+				     bool *);
+
+	/* Packet Buffer Manipulation */
+	void (*set_rxpba)(struct ixgbe_hw *, int, u32, int);
+
+	/* LED */
+	s32 (*led_on)(struct ixgbe_hw *, u32);
+	s32 (*led_off)(struct ixgbe_hw *, u32);
+	s32 (*blink_led_start)(struct ixgbe_hw *, u32);
+	s32 (*blink_led_stop)(struct ixgbe_hw *, u32);
+
+	/* RAR, Multicast, VLAN */
+	s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32);
+	s32 (*clear_rar)(struct ixgbe_hw *, u32);
+	s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32);
+	s32 (*set_vmdq_san_mac)(struct ixgbe_hw *, u32);
+	s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32);
+	s32 (*init_rx_addrs)(struct ixgbe_hw *);
+	s32 (*update_mc_addr_list)(struct ixgbe_hw *, struct net_device *);
+	s32 (*enable_mc)(struct ixgbe_hw *);
+	s32 (*disable_mc)(struct ixgbe_hw *);
+	s32 (*clear_vfta)(struct ixgbe_hw *);
+	s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool);
+	s32 (*init_uta_tables)(struct ixgbe_hw *);
+	void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int);
+	void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int);
+
+	/* Flow Control */
+	s32 (*fc_enable)(struct ixgbe_hw *);
+
+	/* Manageability interface */
+	s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
+	s32 (*get_thermal_sensor_data)(struct ixgbe_hw *);
+	s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
+	void (*disable_rx)(struct ixgbe_hw *hw);
+	void (*enable_rx)(struct ixgbe_hw *hw);
+	void (*set_source_address_pruning)(struct ixgbe_hw *, bool,
+					   unsigned int);
+	void (*set_ethertype_anti_spoofing)(struct ixgbe_hw *, bool, int);
+
+	/* DMA Coalescing */
+	s32 (*dmac_config)(struct ixgbe_hw *hw);
+	s32 (*dmac_update_tcs)(struct ixgbe_hw *hw);
+	s32 (*dmac_config_tcs)(struct ixgbe_hw *hw);
+};
+
+struct ixgbe_phy_operations {
+	s32 (*identify)(struct ixgbe_hw *);
+	s32 (*identify_sfp)(struct ixgbe_hw *);
+	s32 (*init)(struct ixgbe_hw *);
+	s32 (*reset)(struct ixgbe_hw *);
+	s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *);
+	s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16);
+	s32 (*read_reg_mdi)(struct ixgbe_hw *, u32, u32, u16 *);
+	s32 (*write_reg_mdi)(struct ixgbe_hw *, u32, u32, u16);
+	s32 (*setup_link)(struct ixgbe_hw *);
+	s32 (*setup_internal_link)(struct ixgbe_hw *);
+	s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool);
+	s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *);
+	s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *);
+	s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *);
+	s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8);
+	s32 (*read_i2c_sff8472)(struct ixgbe_hw *, u8 , u8 *);
+	s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *);
+	s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8);
+	s32 (*read_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
+	s32 (*write_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
+	s32 (*check_overtemp)(struct ixgbe_hw *);
+};
+
+struct ixgbe_eeprom_info {
+	struct ixgbe_eeprom_operations  ops;
+	enum ixgbe_eeprom_type          type;
+	u32                             semaphore_delay;
+	u16                             word_size;
+	u16                             address_bits;
+	u16                             word_page_size;
+};
+
+#define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED	0x01
+struct ixgbe_mac_info {
+	struct ixgbe_mac_operations     ops;
+	enum ixgbe_mac_type             type;
+	u8                              addr[ETH_ALEN];
+	u8                              perm_addr[ETH_ALEN];
+	u8                              san_addr[ETH_ALEN];
+	/* prefix for World Wide Node Name (WWNN) */
+	u16                             wwnn_prefix;
+	/* prefix for World Wide Port Name (WWPN) */
+	u16                             wwpn_prefix;
+	u16				max_msix_vectors;
+#define IXGBE_MAX_MTA			128
+	u32				mta_shadow[IXGBE_MAX_MTA];
+	s32                             mc_filter_type;
+	u32                             mcft_size;
+	u32                             vft_size;
+	u32                             num_rar_entries;
+	u32                             rar_highwater;
+	u32				rx_pb_size;
+	u32                             max_tx_queues;
+	u32                             max_rx_queues;
+	u32                             orig_autoc;
+	u32                             orig_autoc2;
+	bool                            orig_link_settings_stored;
+	bool                            autotry_restart;
+	u8                              flags;
+	u8				san_mac_rar_index;
+	struct ixgbe_thermal_sensor_data  thermal_sensor_data;
+	bool				set_lben;
+};
+
+struct ixgbe_phy_info {
+	struct ixgbe_phy_operations     ops;
+	struct mdio_if_info		mdio;
+	enum ixgbe_phy_type             type;
+	u32                             id;
+	enum ixgbe_sfp_type             sfp_type;
+	bool                            sfp_setup_needed;
+	u32                             revision;
+	enum ixgbe_media_type           media_type;
+	u8				lan_id;
+	u32				phy_semaphore_mask;
+	bool                            reset_disable;
+	ixgbe_autoneg_advertised        autoneg_advertised;
+	enum ixgbe_smart_speed          smart_speed;
+	bool                            smart_speed_active;
+	bool                            multispeed_fiber;
+	bool                            reset_if_overtemp;
+	bool                            qsfp_shared_i2c_bus;
+};
+
+#include "ixgbe_mbx.h"
+
+struct ixgbe_mbx_operations {
+	s32 (*init_params)(struct ixgbe_hw *hw);
+	s32 (*read)(struct ixgbe_hw *, u32 *, u16,  u16);
+	s32 (*write)(struct ixgbe_hw *, u32 *, u16, u16);
+	s32 (*read_posted)(struct ixgbe_hw *, u32 *, u16,  u16);
+	s32 (*write_posted)(struct ixgbe_hw *, u32 *, u16, u16);
+	s32 (*check_for_msg)(struct ixgbe_hw *, u16);
+	s32 (*check_for_ack)(struct ixgbe_hw *, u16);
+	s32 (*check_for_rst)(struct ixgbe_hw *, u16);
+};
+
+struct ixgbe_mbx_stats {
+	u32 msgs_tx;
+	u32 msgs_rx;
+
+	u32 acks;
+	u32 reqs;
+	u32 rsts;
+};
+
+struct ixgbe_mbx_info {
+	struct ixgbe_mbx_operations ops;
+	struct ixgbe_mbx_stats stats;
+	u32 timeout;
+	u32 usec_delay;
+	u32 v2p_mailbox;
+	u16 size;
+};
+
+struct ixgbe_hw {
+	u8 __iomem			*hw_addr;
+	void				*back;
+	struct ixgbe_mac_info		mac;
+	struct ixgbe_addr_filter_info	addr_ctrl;
+	struct ixgbe_fc_info		fc;
+	struct ixgbe_phy_info		phy;
+	struct ixgbe_eeprom_info	eeprom;
+	struct ixgbe_bus_info		bus;
+	struct ixgbe_mbx_info		mbx;
+	u16				device_id;
+	u16				vendor_id;
+	u16				subsystem_device_id;
+	u16				subsystem_vendor_id;
+	u8				revision_id;
+	bool				adapter_stopped;
+	bool				force_full_reset;
+	bool				allow_unsupported_sfp;
+	bool				wol_enabled;
+};
+
+struct ixgbe_info {
+	enum ixgbe_mac_type		mac;
+	s32 				(*get_invariants)(struct ixgbe_hw *);
+	struct ixgbe_mac_operations	*mac_ops;
+	struct ixgbe_eeprom_operations	*eeprom_ops;
+	struct ixgbe_phy_operations	*phy_ops;
+	struct ixgbe_mbx_operations	*mbx_ops;
+};
+
+
+/* Error Codes */
+#define IXGBE_ERR_EEPROM                        -1
+#define IXGBE_ERR_EEPROM_CHECKSUM               -2
+#define IXGBE_ERR_PHY                           -3
+#define IXGBE_ERR_CONFIG                        -4
+#define IXGBE_ERR_PARAM                         -5
+#define IXGBE_ERR_MAC_TYPE                      -6
+#define IXGBE_ERR_UNKNOWN_PHY                   -7
+#define IXGBE_ERR_LINK_SETUP                    -8
+#define IXGBE_ERR_ADAPTER_STOPPED               -9
+#define IXGBE_ERR_INVALID_MAC_ADDR              -10
+#define IXGBE_ERR_DEVICE_NOT_SUPPORTED          -11
+#define IXGBE_ERR_MASTER_REQUESTS_PENDING       -12
+#define IXGBE_ERR_INVALID_LINK_SETTINGS         -13
+#define IXGBE_ERR_AUTONEG_NOT_COMPLETE          -14
+#define IXGBE_ERR_RESET_FAILED                  -15
+#define IXGBE_ERR_SWFW_SYNC                     -16
+#define IXGBE_ERR_PHY_ADDR_INVALID              -17
+#define IXGBE_ERR_I2C                           -18
+#define IXGBE_ERR_SFP_NOT_SUPPORTED             -19
+#define IXGBE_ERR_SFP_NOT_PRESENT               -20
+#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT       -21
+#define IXGBE_ERR_NO_SAN_ADDR_PTR               -22
+#define IXGBE_ERR_FDIR_REINIT_FAILED            -23
+#define IXGBE_ERR_EEPROM_VERSION                -24
+#define IXGBE_ERR_NO_SPACE                      -25
+#define IXGBE_ERR_OVERTEMP                      -26
+#define IXGBE_ERR_FC_NOT_NEGOTIATED             -27
+#define IXGBE_ERR_FC_NOT_SUPPORTED              -28
+#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE        -30
+#define IXGBE_ERR_PBA_SECTION                   -31
+#define IXGBE_ERR_INVALID_ARGUMENT              -32
+#define IXGBE_ERR_HOST_INTERFACE_COMMAND        -33
+#define IXGBE_NOT_IMPLEMENTED                   0x7FFFFFFF
+
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P)	((P == 0) ? (0x4010) : (0x8010))
+#define IXGBE_KRM_LINK_CTRL_1(P)	((P == 0) ? (0x420C) : (0x820C))
+#define IXGBE_KRM_DSP_TXFFE_STATE_4(P)	((P == 0) ? (0x4634) : (0x8634))
+#define IXGBE_KRM_DSP_TXFFE_STATE_5(P)	((P == 0) ? (0x4638) : (0x8638))
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P)	((P == 0) ? (0x4B00) : (0x8B00))
+#define IXGBE_KRM_PMD_DFX_BURNIN(P)	((P == 0) ? (0x4E00) : (0x8E00))
+#define IXGBE_KRM_TX_COEFF_CTRL_1(P)	((P == 0) ? (0x5520) : (0x9520))
+#define IXGBE_KRM_RX_ANA_CTL(P)		((P == 0) ? (0x5A00) : (0x9A00))
+
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B		(1 << 9)
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS		(1 << 11)
+
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK	(0x7 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G	(2 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G	(4 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ		(1 << 14)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC		(1 << 15)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX		(1 << 16)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR		(1 << 18)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX		(1 << 24)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR		(1 << 26)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE		(1 << 29)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART		(1 << 31)
+
+#define IXGBE_KRM_DSP_TXFFE_STATE_C0_EN			(1 << 6)
+#define IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN		(1 << 15)
+#define IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN		(1 << 16)
+
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL	(1 << 4)
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS	(1 << 2)
+
+#define IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK	(0x3 << 16)
+
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN	(1 << 1)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN	(1 << 2)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN		(1 << 3)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN		(1 << 31)
+
+#define IXGBE_KX4_LINK_CNTL_1				0x4C
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX		(1 << 16)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4		(1 << 17)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX		(1 << 24)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX4		(1 << 25)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE		(1 << 29)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_FORCE_LINK_UP	(1 << 30)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART		(1 << 31)
+
+#define IXGBE_SB_IOSF_INDIRECT_CTRL		0x00011144
+#define IXGBE_SB_IOSF_INDIRECT_DATA		0x00011148
+
+#define IXGBE_SB_IOSF_CTRL_ADDR_SHIFT		0
+#define IXGBE_SB_IOSF_CTRL_ADDR_MASK		0xFF
+#define IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT	18
+#define IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK \
+				(0x3 << IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT)
+#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT	20
+#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK \
+				(0xFF << IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT)
+#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT	28
+#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_MASK	0x7
+#define IXGBE_SB_IOSF_CTRL_BUSY_SHIFT		31
+#define IXGBE_SB_IOSF_CTRL_BUSY		(1 << IXGBE_SB_IOSF_CTRL_BUSY_SHIFT)
+#define IXGBE_SB_IOSF_TARGET_KR_PHY	0
+#define IXGBE_SB_IOSF_TARGET_KX4_UNIPHY	1
+#define IXGBE_SB_IOSF_TARGET_KX4_PCS0	2
+#define IXGBE_SB_IOSF_TARGET_KX4_PCS1	3
+
+#endif /* _IXGBE_TYPE_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
new file mode 100644
index 000000000..f5f948d08
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -0,0 +1,863 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2014 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+#include "ixgbe_x540.h"
+
+#define IXGBE_X540_MAX_TX_QUEUES	128
+#define IXGBE_X540_MAX_RX_QUEUES	128
+#define IXGBE_X540_RAR_ENTRIES		128
+#define IXGBE_X540_MC_TBL_SIZE		128
+#define IXGBE_X540_VFT_TBL_SIZE		128
+#define IXGBE_X540_RX_PB_SIZE		384
+
+static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw);
+static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
+static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
+static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
+
+enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
+{
+	return ixgbe_media_type_copper;
+}
+
+s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES;
+	mac->rx_pb_size = IXGBE_X540_RX_PB_SIZE;
+	mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ **/
+s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			      bool autoneg_wait_to_complete)
+{
+	return hw->phy.ops.setup_link_speed(hw, speed,
+					    autoneg_wait_to_complete);
+}
+
+/**
+ *  ixgbe_reset_hw_X540 - Perform hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks
+ *  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ *  reset.
+ **/
+s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u32 ctrl, i;
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	status = hw->mac.ops.stop_adapter(hw);
+	if (status)
+		return status;
+
+	/* flush pending Tx transactions */
+	ixgbe_clear_tx_pending(hw);
+
+mac_reset_top:
+	ctrl = IXGBE_CTRL_RST;
+	ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear indicating reset is complete */
+	for (i = 0; i < 10; i++) {
+		udelay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST_MASK))
+			break;
+	}
+
+	if (ctrl & IXGBE_CTRL_RST_MASK) {
+		status = IXGBE_ERR_RESET_FAILED;
+		hw_dbg(hw, "Reset polling failed to complete.\n");
+	}
+	msleep(100);
+
+	/*
+	 * Double resets are required for recovery from certain error
+	 * conditions.  Between resets, it is necessary to stall to allow time
+	 * for any pending HW events to complete.
+	 */
+	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+		goto mac_reset_top;
+	}
+
+	/* Set the Rx packet buffer size. */
+	IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT);
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = IXGBE_X540_MAX_TX_QUEUES;
+	hw->mac.ops.init_rx_addrs(hw);
+
+	/* Store the permanent SAN mac address */
+	hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+	/* Add the SAN MAC address to the RAR only if it's a valid address */
+	if (is_valid_ether_addr(hw->mac.san_addr)) {
+		hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+				    hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+		/* Save the SAN MAC RAR index */
+		hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
+
+		/* Reserve the last RAR for the SAN MAC address */
+		hw->mac.num_rar_entries--;
+	}
+
+	/* Store the alternative WWNN/WWPN prefix */
+	hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+				   &hw->mac.wwpn_prefix);
+
+	return status;
+}
+
+/**
+ *  ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function
+ *  and the generation start_hw function.
+ *  Then performs revision-specific operations, if any.
+ **/
+s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
+{
+	s32 ret_val;
+
+	ret_val = ixgbe_start_hw_generic(hw);
+	if (ret_val)
+		return ret_val;
+
+	return ixgbe_start_hw_gen2(hw);
+}
+
+/**
+ *  ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ *  ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	u32 eec;
+	u16 eeprom_size;
+
+	if (eeprom->type == ixgbe_eeprom_uninitialized) {
+		eeprom->semaphore_delay = 10;
+		eeprom->type = ixgbe_flash;
+
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+		eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+				    IXGBE_EEC_SIZE_SHIFT);
+		eeprom->word_size = 1 << (eeprom_size +
+					  IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+		hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
+		       eeprom->type, eeprom->word_size);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_eerd_X540- Read EEPROM word using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	s32 status;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+		return IXGBE_ERR_SWFW_SYNC;
+
+	status = ixgbe_read_eerd_generic(hw, offset, data);
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/**
+ *  ixgbe_read_eerd_buffer_X540 - Read EEPROM word(s) using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @words: number of words
+ *  @data: word(s) read from the EEPROM
+ *
+ *  Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+static s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
+				       u16 offset, u16 words, u16 *data)
+{
+	s32 status;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+		return IXGBE_ERR_SWFW_SYNC;
+
+	status = ixgbe_read_eerd_buffer_generic(hw, offset, words, data);
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/**
+ *  ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	s32 status;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+		return IXGBE_ERR_SWFW_SYNC;
+
+	status = ixgbe_write_eewr_generic(hw, offset, data);
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/**
+ *  ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @words: number of words
+ *  @data: word(s) write to the EEPROM
+ *
+ *  Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+static s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
+					u16 offset, u16 words, u16 *data)
+{
+	s32 status;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+		return IXGBE_ERR_SWFW_SYNC;
+
+	status = ixgbe_write_eewr_buffer_generic(hw, offset, words, data);
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/**
+ *  ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
+ *
+ *  This function does not use synchronization for EERD and EEWR. It can
+ *  be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
+ *
+ *  @hw: pointer to hardware structure
+ **/
+static s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+	u16 i;
+	u16 j;
+	u16 checksum = 0;
+	u16 length = 0;
+	u16 pointer = 0;
+	u16 word = 0;
+	u16 checksum_last_word = IXGBE_EEPROM_CHECKSUM;
+	u16 ptr_start = IXGBE_PCIE_ANALOG_PTR;
+
+	/*
+	 * Do not use hw->eeprom.ops.read because we do not want to take
+	 * the synchronization semaphores here. Instead use
+	 * ixgbe_read_eerd_generic
+	 */
+
+	/* Include 0x0-0x3F in the checksum */
+	for (i = 0; i < checksum_last_word; i++) {
+		if (ixgbe_read_eerd_generic(hw, i, &word)) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			return IXGBE_ERR_EEPROM;
+		}
+		checksum += word;
+	}
+
+	/*
+	 * Include all data from pointers 0x3, 0x6-0xE.  This excludes the
+	 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+	 */
+	for (i = ptr_start; i < IXGBE_FW_PTR; i++) {
+		if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+			continue;
+
+		if (ixgbe_read_eerd_generic(hw, i, &pointer)) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			break;
+		}
+
+		/* Skip pointer section if the pointer is invalid. */
+		if (pointer == 0xFFFF || pointer == 0 ||
+		    pointer >= hw->eeprom.word_size)
+			continue;
+
+		if (ixgbe_read_eerd_generic(hw, pointer, &length)) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			return IXGBE_ERR_EEPROM;
+			break;
+		}
+
+		/* Skip pointer section if length is invalid. */
+		if (length == 0xFFFF || length == 0 ||
+		    (pointer + length) >= hw->eeprom.word_size)
+			continue;
+
+		for (j = pointer + 1; j <= pointer + length; j++) {
+			if (ixgbe_read_eerd_generic(hw, j, &word)) {
+				hw_dbg(hw, "EEPROM read failed\n");
+				return IXGBE_ERR_EEPROM;
+			}
+			checksum += word;
+		}
+	}
+
+	checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+	return (s32)checksum;
+}
+
+/**
+ *  ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum.  If the
+ *  caller does not need checksum_val, the value can be NULL.
+ **/
+static s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
+					       u16 *checksum_val)
+{
+	s32 status;
+	u16 checksum;
+	u16 read_checksum = 0;
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+	if (status) {
+		hw_dbg(hw, "EEPROM read failed\n");
+		return status;
+	}
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+		return IXGBE_ERR_SWFW_SYNC;
+
+	status = hw->eeprom.ops.calc_checksum(hw);
+	if (status < 0)
+		goto out;
+
+	checksum = (u16)(status & 0xffff);
+
+	/* Do not use hw->eeprom.ops.read because we do not want to take
+	 * the synchronization semaphores twice here.
+	 */
+	status = ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM,
+					 &read_checksum);
+	if (status)
+		goto out;
+
+	/* Verify read checksum from EEPROM is the same as
+	 * calculated checksum
+	 */
+	if (read_checksum != checksum) {
+		hw_dbg(hw, "Invalid EEPROM checksum");
+		status = IXGBE_ERR_EEPROM_CHECKSUM;
+	}
+
+	/* If the user cares, return the calculated checksum */
+	if (checksum_val)
+		*checksum_val = checksum;
+
+out:
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+	return status;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+static s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 checksum;
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+	if (status) {
+		hw_dbg(hw, "EEPROM read failed\n");
+		return status;
+	}
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+		return  IXGBE_ERR_SWFW_SYNC;
+
+	status = hw->eeprom.ops.calc_checksum(hw);
+	if (status < 0)
+		goto out;
+
+	checksum = (u16)(status & 0xffff);
+
+	/* Do not use hw->eeprom.ops.write because we do not want to
+	 * take the synchronization semaphores twice here.
+	 */
+	status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM, checksum);
+	if (status)
+		goto out;
+
+	status = ixgbe_update_flash_X540(hw);
+
+out:
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/**
+ * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
+ * @hw: pointer to hardware structure
+ *
+ * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
+ * EEPROM from shadow RAM to the flash device.
+ **/
+static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
+{
+	u32 flup;
+	s32 status;
+
+	status = ixgbe_poll_flash_update_done_X540(hw);
+	if (status == IXGBE_ERR_EEPROM) {
+		hw_dbg(hw, "Flash update time out\n");
+		return status;
+	}
+
+	flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
+
+	status = ixgbe_poll_flash_update_done_X540(hw);
+	if (status == 0)
+		hw_dbg(hw, "Flash update complete\n");
+	else
+		hw_dbg(hw, "Flash update time out\n");
+
+	if (hw->revision_id == 0) {
+		flup = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+		if (flup & IXGBE_EEC_SEC1VAL) {
+			flup |= IXGBE_EEC_FLUP;
+			IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
+		}
+
+		status = ixgbe_poll_flash_update_done_X540(hw);
+		if (status == 0)
+			hw_dbg(hw, "Flash update complete\n");
+		else
+			hw_dbg(hw, "Flash update time out\n");
+	}
+
+	return status;
+}
+
+/**
+ * ixgbe_poll_flash_update_done_X540 - Poll flash update status
+ * @hw: pointer to hardware structure
+ *
+ * Polls the FLUDONE (bit 26) of the EEC Register to determine when the
+ * flash update is done.
+ **/
+static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u32 reg;
+
+	for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) {
+		reg = IXGBE_READ_REG(hw, IXGBE_EEC);
+		if (reg & IXGBE_EEC_FLUDONE)
+			return 0;
+		udelay(5);
+	}
+	return IXGBE_ERR_EEPROM;
+}
+
+/**
+ * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore thought the SW_FW_SYNC register for
+ * the specified function (CSR, PHY0, PHY1, NVM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 swfw_sync;
+	u32 swmask = mask;
+	u32 fwmask = mask << 5;
+	u32 hwmask = 0;
+	u32 timeout = 200;
+	u32 i;
+
+	if (swmask == IXGBE_GSSR_EEP_SM)
+		hwmask = IXGBE_GSSR_FLASH_SM;
+
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * SW NVM semaphore bit is used for access to all
+		 * SW_FW_SYNC bits (not just NVM)
+		 */
+		if (ixgbe_get_swfw_sync_semaphore(hw))
+			return IXGBE_ERR_SWFW_SYNC;
+
+		swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+		if (!(swfw_sync & (fwmask | swmask | hwmask))) {
+			swfw_sync |= swmask;
+			IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+			ixgbe_release_swfw_sync_semaphore(hw);
+			break;
+		} else {
+			/*
+			 * Firmware currently using resource (fwmask),
+			 * hardware currently using resource (hwmask),
+			 * or other software thread currently using
+			 * resource (swmask)
+			 */
+			ixgbe_release_swfw_sync_semaphore(hw);
+			usleep_range(5000, 10000);
+		}
+	}
+
+	/*
+	 * If the resource is not released by the FW/HW the SW can assume that
+	 * the FW/HW malfunctions. In that case the SW should sets the
+	 * SW bit(s) of the requested resource(s) while ignoring the
+	 * corresponding FW/HW bits in the SW_FW_SYNC register.
+	 */
+	if (i >= timeout) {
+		swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+		if (swfw_sync & (fwmask | hwmask)) {
+			if (ixgbe_get_swfw_sync_semaphore(hw))
+				return IXGBE_ERR_SWFW_SYNC;
+
+			swfw_sync |= swmask;
+			IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+			ixgbe_release_swfw_sync_semaphore(hw);
+		}
+	}
+
+	usleep_range(5000, 10000);
+	return 0;
+}
+
+/**
+ * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore through the SW_FW_SYNC register
+ * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
+ **/
+void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
+{
+	u32 swfw_sync;
+	u32 swmask = mask;
+
+	ixgbe_get_swfw_sync_semaphore(hw);
+
+	swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+	swfw_sync &= ~swmask;
+	IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+
+	ixgbe_release_swfw_sync_semaphore(hw);
+	usleep_range(5000, 10000);
+}
+
+/**
+ * ixgbe_get_swfw_sync_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Sets the hardware semaphores so SW/FW can gain control of shared resources
+ */
+static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+	u32 timeout = 2000;
+	u32 i;
+	u32 swsm;
+
+	/* Get SMBI software semaphore between device drivers first */
+	for (i = 0; i < timeout; i++) {
+		/* If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+		if (!(swsm & IXGBE_SWSM_SMBI))
+			break;
+		usleep_range(50, 100);
+	}
+
+	if (i == timeout) {
+		hw_dbg(hw,
+		       "Software semaphore SMBI between device drivers not granted.\n");
+		return IXGBE_ERR_EEPROM;
+	}
+
+	/* Now get the semaphore between SW/FW through the REGSMP bit */
+	for (i = 0; i < timeout; i++) {
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+		if (!(swsm & IXGBE_SWFW_REGSMP))
+			return 0;
+
+		usleep_range(50, 100);
+	}
+
+	return IXGBE_ERR_EEPROM;
+}
+
+/**
+ * ixgbe_release_nvm_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * This function clears hardware semaphore bits.
+ **/
+static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+	 u32 swsm;
+
+	/* Release both semaphores by writing 0 to the bits REGSMP and SMBI */
+
+	swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+	swsm &= ~IXGBE_SWSM_SMBI;
+	IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+
+	swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+	swsm &= ~IXGBE_SWFW_REGSMP;
+	IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm);
+
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_blink_led_start_X540 - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ *
+ * Devices that implement the version 2 interface:
+ *   X540
+ **/
+s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
+{
+	u32 macc_reg;
+	u32 ledctl_reg;
+	ixgbe_link_speed speed;
+	bool link_up;
+
+	/*
+	 * Link should be up in order for the blink bit in the LED control
+	 * register to work. Force link and speed in the MAC if link is down.
+	 * This will be reversed when we stop the blinking.
+	 */
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+	if (!link_up) {
+		macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+		macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
+		IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+	}
+	/* Set the LED to LINK_UP + BLINK. */
+	ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+	ledctl_reg |= IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ *
+ * Devices that implement the version 2 interface:
+ *   X540
+ **/
+s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
+{
+	u32 macc_reg;
+	u32 ledctl_reg;
+
+	/* Restore the LED to its default value. */
+	ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+	ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+	ledctl_reg &= ~IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+
+	/* Unforce link and speed in the MAC. */
+	macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+	macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS);
+	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+static struct ixgbe_mac_operations mac_ops_X540 = {
+	.init_hw                = &ixgbe_init_hw_generic,
+	.reset_hw               = &ixgbe_reset_hw_X540,
+	.start_hw               = &ixgbe_start_hw_X540,
+	.clear_hw_cntrs         = &ixgbe_clear_hw_cntrs_generic,
+	.get_media_type         = &ixgbe_get_media_type_X540,
+	.enable_rx_dma          = &ixgbe_enable_rx_dma_generic,
+	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
+	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,
+	.get_device_caps        = &ixgbe_get_device_caps_generic,
+	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_generic,
+	.stop_adapter           = &ixgbe_stop_adapter_generic,
+	.get_bus_info           = &ixgbe_get_bus_info_generic,
+	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
+	.read_analog_reg8       = NULL,
+	.write_analog_reg8      = NULL,
+	.setup_link             = &ixgbe_setup_mac_link_X540,
+	.set_rxpba		= &ixgbe_set_rxpba_generic,
+	.check_link             = &ixgbe_check_mac_link_generic,
+	.get_link_capabilities  = &ixgbe_get_copper_link_capabilities_generic,
+	.led_on                 = &ixgbe_led_on_generic,
+	.led_off                = &ixgbe_led_off_generic,
+	.blink_led_start        = &ixgbe_blink_led_start_X540,
+	.blink_led_stop         = &ixgbe_blink_led_stop_X540,
+	.set_rar                = &ixgbe_set_rar_generic,
+	.clear_rar              = &ixgbe_clear_rar_generic,
+	.set_vmdq               = &ixgbe_set_vmdq_generic,
+	.set_vmdq_san_mac	= &ixgbe_set_vmdq_san_mac_generic,
+	.clear_vmdq             = &ixgbe_clear_vmdq_generic,
+	.init_rx_addrs          = &ixgbe_init_rx_addrs_generic,
+	.update_mc_addr_list    = &ixgbe_update_mc_addr_list_generic,
+	.enable_mc              = &ixgbe_enable_mc_generic,
+	.disable_mc             = &ixgbe_disable_mc_generic,
+	.clear_vfta             = &ixgbe_clear_vfta_generic,
+	.set_vfta               = &ixgbe_set_vfta_generic,
+	.fc_enable              = &ixgbe_fc_enable_generic,
+	.set_fw_drv_ver         = &ixgbe_set_fw_drv_ver_generic,
+	.init_uta_tables        = &ixgbe_init_uta_tables_generic,
+	.setup_sfp              = NULL,
+	.set_mac_anti_spoofing  = &ixgbe_set_mac_anti_spoofing,
+	.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
+	.acquire_swfw_sync      = &ixgbe_acquire_swfw_sync_X540,
+	.release_swfw_sync      = &ixgbe_release_swfw_sync_X540,
+	.disable_rx_buff	= &ixgbe_disable_rx_buff_generic,
+	.enable_rx_buff		= &ixgbe_enable_rx_buff_generic,
+	.get_thermal_sensor_data = NULL,
+	.init_thermal_sensor_thresh = NULL,
+	.prot_autoc_read	= &prot_autoc_read_generic,
+	.prot_autoc_write	= &prot_autoc_write_generic,
+	.enable_rx		= &ixgbe_enable_rx_generic,
+	.disable_rx		= &ixgbe_disable_rx_generic,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_X540 = {
+	.init_params            = &ixgbe_init_eeprom_params_X540,
+	.read                   = &ixgbe_read_eerd_X540,
+	.read_buffer		= &ixgbe_read_eerd_buffer_X540,
+	.write                  = &ixgbe_write_eewr_X540,
+	.write_buffer		= &ixgbe_write_eewr_buffer_X540,
+	.calc_checksum		= &ixgbe_calc_eeprom_checksum_X540,
+	.validate_checksum      = &ixgbe_validate_eeprom_checksum_X540,
+	.update_checksum        = &ixgbe_update_eeprom_checksum_X540,
+};
+
+static struct ixgbe_phy_operations phy_ops_X540 = {
+	.identify               = &ixgbe_identify_phy_generic,
+	.identify_sfp           = &ixgbe_identify_sfp_module_generic,
+	.init			= NULL,
+	.reset                  = NULL,
+	.read_reg               = &ixgbe_read_phy_reg_generic,
+	.write_reg              = &ixgbe_write_phy_reg_generic,
+	.setup_link             = &ixgbe_setup_phy_link_generic,
+	.setup_link_speed       = &ixgbe_setup_phy_link_speed_generic,
+	.read_i2c_byte          = &ixgbe_read_i2c_byte_generic,
+	.write_i2c_byte         = &ixgbe_write_i2c_byte_generic,
+	.read_i2c_sff8472	= &ixgbe_read_i2c_sff8472_generic,
+	.read_i2c_eeprom        = &ixgbe_read_i2c_eeprom_generic,
+	.write_i2c_eeprom       = &ixgbe_write_i2c_eeprom_generic,
+	.check_overtemp         = &ixgbe_tn_check_overtemp,
+	.get_firmware_version   = &ixgbe_get_phy_firmware_version_generic,
+};
+
+struct ixgbe_info ixgbe_X540_info = {
+	.mac                    = ixgbe_mac_X540,
+	.get_invariants         = &ixgbe_get_invariants_X540,
+	.mac_ops                = &mac_ops_X540,
+	.eeprom_ops             = &eeprom_ops_X540,
+	.phy_ops                = &phy_ops_X540,
+	.mbx_ops                = &mbx_ops_generic,
+};
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.h
new file mode 100644
index 000000000..a1468b1f4
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.h
@@ -0,0 +1,39 @@
+/*******************************************************************************
+ *
+ * Intel 10 Gigabit PCI Express Linux driver
+ *  Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms and conditions of the GNU General Public License,
+ *  version 2, as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ *  more details.
+ *
+ *  The full GNU General Public License is included in this distribution in
+ *  the file called "COPYING".
+ *
+ *  Contact Information:
+ *  Linux NICS <linux.nics@intel.com>
+ *  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ *  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include "ixgbe_type.h"
+
+s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			      bool autoneg_wait_to_complete);
+s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw);
+enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			      bool autoneg_wait_to_complete);
+s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask);
+s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
new file mode 100644
index 000000000..cf5cf819a
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -0,0 +1,1532 @@
+/*******************************************************************************
+ *
+ *  Intel 10 Gigabit PCI Express Linux driver
+ *  Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms and conditions of the GNU General Public License,
+ *  version 2, as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ *  more details.
+ *
+ *  The full GNU General Public License is included in this distribution in
+ *  the file called "COPYING".
+ *
+ *  Contact Information:
+ *  Linux NICS <linux.nics@intel.com>
+ *  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ *  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+#include "ixgbe_x540.h"
+#include "ixgbe_type.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+/** ixgbe_identify_phy_x550em - Get PHY type based on device id
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns error code
+ */
+static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
+{
+	u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_X550EM_X_SFP:
+		/* set up for CS4227 usage */
+		hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+		if (hw->bus.lan_id) {
+			esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
+			esdp |= IXGBE_ESDP_SDP1_DIR;
+		}
+		esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+
+		return ixgbe_identify_module_generic(hw);
+	case IXGBE_DEV_ID_X550EM_X_KX4:
+		hw->phy.type = ixgbe_phy_x550em_kx4;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_KR:
+		hw->phy.type = ixgbe_phy_x550em_kr;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_1G_T:
+	case IXGBE_DEV_ID_X550EM_X_10G_T:
+		return ixgbe_identify_phy_generic(hw);
+	default:
+		break;
+	}
+	return 0;
+}
+
+static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+				     u32 device_type, u16 *phy_data)
+{
+	return IXGBE_NOT_IMPLEMENTED;
+}
+
+static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
+				      u32 device_type, u16 phy_data)
+{
+	return IXGBE_NOT_IMPLEMENTED;
+}
+
+/** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ *  ixgbe_hw struct in order to set up EEPROM access.
+ **/
+static s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	u32 eec;
+	u16 eeprom_size;
+
+	if (eeprom->type == ixgbe_eeprom_uninitialized) {
+		eeprom->semaphore_delay = 10;
+		eeprom->type = ixgbe_flash;
+
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+		eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+				    IXGBE_EEC_SIZE_SHIFT);
+		eeprom->word_size = 1 << (eeprom_size +
+					  IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+		hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
+		       eeprom->type, eeprom->word_size);
+	}
+
+	return 0;
+}
+
+/** ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the
+ *  IOSF device
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 3 bit device type
+ *  @phy_data: Pointer to read data from the register
+ **/
+static s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+				       u32 device_type, u32 *data)
+{
+	u32 i, command, error;
+
+	command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+		   (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+	/* Write IOSF control register */
+	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+	/* Check every 10 usec to see if the address cycle completed.
+	 * The SB IOSF BUSY bit will clear when the operation is
+	 * complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		usleep_range(10, 20);
+
+		command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
+		if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
+			break;
+	}
+
+	if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+		error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+			 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+		hw_dbg(hw, "Failed to read, error %x\n", error);
+		return IXGBE_ERR_PHY;
+	}
+
+	if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
+		hw_dbg(hw, "Read timed out\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	*data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA);
+
+	return 0;
+}
+
+/** ixgbe_read_ee_hostif_data_X550 - Read EEPROM word using a host interface
+ *  command assuming that the semaphore is already obtained.
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+static s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+					  u16 *data)
+{
+	s32 status;
+	struct ixgbe_hic_read_shadow_ram buffer;
+
+	buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* convert offset from words to bytes */
+	buffer.address = cpu_to_be32(offset * 2);
+	/* one word */
+	buffer.length = cpu_to_be16(sizeof(u16));
+
+	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+					      sizeof(buffer),
+					      IXGBE_HI_COMMAND_TIMEOUT, false);
+	if (status)
+		return status;
+
+	*data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+					  FW_NVM_DATA_OFFSET);
+
+	return 0;
+}
+
+/** ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @words: number of words
+ *  @data: word(s) read from the EEPROM
+ *
+ *  Reads a 16 bit word(s) from the EEPROM using the hostif.
+ **/
+static s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+					    u16 offset, u16 words, u16 *data)
+{
+	struct ixgbe_hic_read_shadow_ram buffer;
+	u32 current_word = 0;
+	u16 words_to_read;
+	s32 status;
+	u32 i;
+
+	/* Take semaphore for the entire operation. */
+	status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	if (status) {
+		hw_dbg(hw, "EEPROM read buffer - semaphore failed\n");
+		return status;
+	}
+
+	while (words) {
+		if (words > FW_MAX_READ_BUFFER_SIZE / 2)
+			words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
+		else
+			words_to_read = words;
+
+		buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+		buffer.hdr.req.buf_lenh = 0;
+		buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+		buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+		/* convert offset from words to bytes */
+		buffer.address = cpu_to_be32((offset + current_word) * 2);
+		buffer.length = cpu_to_be16(words_to_read * 2);
+
+		status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+						      sizeof(buffer),
+						      IXGBE_HI_COMMAND_TIMEOUT,
+						      false);
+		if (status) {
+			hw_dbg(hw, "Host interface command failed\n");
+			goto out;
+		}
+
+		for (i = 0; i < words_to_read; i++) {
+			u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) +
+				  2 * i;
+			u32 value = IXGBE_READ_REG(hw, reg);
+
+			data[current_word] = (u16)(value & 0xffff);
+			current_word++;
+			i++;
+			if (i < words_to_read) {
+				value >>= 16;
+				data[current_word] = (u16)(value & 0xffff);
+				current_word++;
+			}
+		}
+		words -= words_to_read;
+	}
+
+out:
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/** ixgbe_checksum_ptr_x550 - Checksum one pointer region
+ *  @hw: pointer to hardware structure
+ *  @ptr: pointer offset in eeprom
+ *  @size: size of section pointed by ptr, if 0 first word will be used as size
+ *  @csum: address of checksum to update
+ *
+ *  Returns error status for any failure
+ **/
+static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
+				   u16 size, u16 *csum, u16 *buffer,
+				   u32 buffer_size)
+{
+	u16 buf[256];
+	s32 status;
+	u16 length, bufsz, i, start;
+	u16 *local_buffer;
+
+	bufsz = sizeof(buf) / sizeof(buf[0]);
+
+	/* Read a chunk at the pointer location */
+	if (!buffer) {
+		status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
+		if (status) {
+			hw_dbg(hw, "Failed to read EEPROM image\n");
+			return status;
+		}
+		local_buffer = buf;
+	} else {
+		if (buffer_size < ptr)
+			return  IXGBE_ERR_PARAM;
+		local_buffer = &buffer[ptr];
+	}
+
+	if (size) {
+		start = 0;
+		length = size;
+	} else {
+		start = 1;
+		length = local_buffer[0];
+
+		/* Skip pointer section if length is invalid. */
+		if (length == 0xFFFF || length == 0 ||
+		    (ptr + length) >= hw->eeprom.word_size)
+			return 0;
+	}
+
+	if (buffer && ((u32)start + (u32)length > buffer_size))
+		return IXGBE_ERR_PARAM;
+
+	for (i = start; length; i++, length--) {
+		if (i == bufsz && !buffer) {
+			ptr += bufsz;
+			i = 0;
+			if (length < bufsz)
+				bufsz = length;
+
+			/* Read a chunk at the pointer location */
+			status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
+								  bufsz, buf);
+			if (status) {
+				hw_dbg(hw, "Failed to read EEPROM image\n");
+				return status;
+			}
+		}
+		*csum += local_buffer[i];
+	}
+	return 0;
+}
+
+/** ixgbe_calc_checksum_X550 - Calculates and returns the checksum
+ *  @hw: pointer to hardware structure
+ *  @buffer: pointer to buffer containing calculated checksum
+ *  @buffer_size: size of buffer
+ *
+ *  Returns a negative error code on error, or the 16-bit checksum
+ **/
+static s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer,
+				    u32 buffer_size)
+{
+	u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1];
+	u16 *local_buffer;
+	s32 status;
+	u16 checksum = 0;
+	u16 pointer, i, size;
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (!buffer) {
+		/* Read pointer area */
+		status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
+						IXGBE_EEPROM_LAST_WORD + 1,
+						eeprom_ptrs);
+		if (status) {
+			hw_dbg(hw, "Failed to read EEPROM image\n");
+			return status;
+		}
+		local_buffer = eeprom_ptrs;
+	} else {
+		if (buffer_size < IXGBE_EEPROM_LAST_WORD)
+			return IXGBE_ERR_PARAM;
+		local_buffer = buffer;
+	}
+
+	/* For X550 hardware include 0x0-0x41 in the checksum, skip the
+	 * checksum word itself
+	 */
+	for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++)
+		if (i != IXGBE_EEPROM_CHECKSUM)
+			checksum += local_buffer[i];
+
+	/* Include all data from pointers 0x3, 0x6-0xE.  This excludes the
+	 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+	 */
+	for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) {
+		if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+			continue;
+
+		pointer = local_buffer[i];
+
+		/* Skip pointer section if the pointer is invalid. */
+		if (pointer == 0xFFFF || pointer == 0 ||
+		    pointer >= hw->eeprom.word_size)
+			continue;
+
+		switch (i) {
+		case IXGBE_PCIE_GENERAL_PTR:
+			size = IXGBE_IXGBE_PCIE_GENERAL_SIZE;
+			break;
+		case IXGBE_PCIE_CONFIG0_PTR:
+		case IXGBE_PCIE_CONFIG1_PTR:
+			size = IXGBE_PCIE_CONFIG_SIZE;
+			break;
+		default:
+			size = 0;
+			break;
+		}
+
+		status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
+						 buffer, buffer_size);
+		if (status)
+			return status;
+	}
+
+	checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+	return (s32)checksum;
+}
+
+/** ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns a negative error code on error, or the 16-bit checksum
+ **/
+static s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+	return ixgbe_calc_checksum_X550(hw, NULL, 0);
+}
+
+/** ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *   Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+static s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	s32 status = 0;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+		status = ixgbe_read_ee_hostif_data_X550(hw, offset, data);
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/** ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum.  If the
+ *  caller does not need checksum_val, the value can be NULL.
+ **/
+static s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw,
+					       u16 *checksum_val)
+{
+	s32 status;
+	u16 checksum;
+	u16 read_checksum = 0;
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+	if (status) {
+		hw_dbg(hw, "EEPROM read failed\n");
+		return status;
+	}
+
+	status = hw->eeprom.ops.calc_checksum(hw);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+					   &read_checksum);
+	if (status)
+		return status;
+
+	/* Verify read checksum from EEPROM is the same as
+	 * calculated checksum
+	 */
+	if (read_checksum != checksum) {
+		status = IXGBE_ERR_EEPROM_CHECKSUM;
+		hw_dbg(hw, "Invalid EEPROM checksum");
+	}
+
+	/* If the user cares, return the calculated checksum */
+	if (checksum_val)
+		*checksum_val = checksum;
+
+	return status;
+}
+
+/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the hostif.
+ **/
+static s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
+					   u16 data)
+{
+	s32 status;
+	struct ixgbe_hic_write_shadow_ram buffer;
+
+	buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
+	buffer.hdr.req.buf_lenh = 0;
+	buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
+	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	/* one word */
+	buffer.length = cpu_to_be16(sizeof(u16));
+	buffer.data = data;
+	buffer.address = cpu_to_be32(offset * 2);
+
+	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+					      sizeof(buffer),
+					      IXGBE_HI_COMMAND_TIMEOUT, false);
+	return status;
+}
+
+/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the hostif.
+ **/
+static s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	s32 status = 0;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+		status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	} else {
+		hw_dbg(hw, "write ee hostif failed to get semaphore");
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	return status;
+}
+
+/** ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
+ *  @hw: pointer to hardware structure
+ *
+ *  Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
+ **/
+static s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	union ixgbe_hic_hdr2 buffer;
+
+	buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD;
+	buffer.req.buf_lenh = 0;
+	buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN;
+	buffer.req.checksum = FW_DEFAULT_CHECKSUM;
+
+	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
+					      sizeof(buffer),
+					      IXGBE_HI_COMMAND_TIMEOUT, false);
+	return status;
+}
+
+/** ixgbe_disable_rx_x550 - Disable RX unit
+ *
+ *  Enables the Rx DMA unit for x550
+ **/
+static void ixgbe_disable_rx_x550(struct ixgbe_hw *hw)
+{
+	u32 rxctrl, pfdtxgswc;
+	s32 status;
+	struct ixgbe_hic_disable_rxen fw_cmd;
+
+	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	if (rxctrl & IXGBE_RXCTRL_RXEN) {
+		pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+		if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
+			pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
+			IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
+			hw->mac.set_lben = true;
+		} else {
+			hw->mac.set_lben = false;
+		}
+
+		fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD;
+		fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN;
+		fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
+		fw_cmd.port_number = (u8)hw->bus.lan_id;
+
+		status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
+					sizeof(struct ixgbe_hic_disable_rxen),
+					IXGBE_HI_COMMAND_TIMEOUT, true);
+
+		/* If we fail - disable RX using register write */
+		if (status) {
+			rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+			if (rxctrl & IXGBE_RXCTRL_RXEN) {
+				rxctrl &= ~IXGBE_RXCTRL_RXEN;
+				IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
+			}
+		}
+	}
+}
+
+/** ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
+ *  @hw: pointer to hardware structure
+ *
+ *  After writing EEPROM to shadow RAM using EEWR register, software calculates
+ *  checksum and updates the EEPROM and instructs the hardware to update
+ *  the flash.
+ **/
+static s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 checksum = 0;
+
+	/* Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
+	if (status) {
+		hw_dbg(hw, "EEPROM read failed\n");
+		return status;
+	}
+
+	status = ixgbe_calc_eeprom_checksum_X550(hw);
+	if (status < 0)
+		return status;
+
+	checksum = (u16)(status & 0xffff);
+
+	status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
+					    checksum);
+	if (status)
+		return status;
+
+	status = ixgbe_update_flash_X550(hw);
+
+	return status;
+}
+
+/** ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @words: number of words
+ *  @data: word(s) write to the EEPROM
+ *
+ *
+ *  Write a 16 bit word(s) to the EEPROM using the hostif.
+ **/
+static s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
+					     u16 offset, u16 words,
+					     u16 *data)
+{
+	s32 status = 0;
+	u32 i = 0;
+
+	/* Take semaphore for the entire operation. */
+	status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	if (status) {
+		hw_dbg(hw, "EEPROM write buffer - semaphore failed\n");
+		return status;
+	}
+
+	for (i = 0; i < words; i++) {
+		status = ixgbe_write_ee_hostif_data_X550(hw, offset + i,
+							 data[i]);
+		if (status) {
+			hw_dbg(hw, "Eeprom buffered write failed\n");
+			break;
+		}
+	}
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+	return status;
+}
+
+/** ixgbe_init_mac_link_ops_X550em - init mac link function pointers
+ *  @hw: pointer to hardware structure
+ **/
+static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	/* CS4227 does not support autoneg, so disable the laser control
+	 * functions for SFP+ fiber
+	 */
+	if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) {
+		mac->ops.disable_tx_laser = NULL;
+		mac->ops.enable_tx_laser = NULL;
+		mac->ops.flap_tx_laser = NULL;
+	}
+}
+
+/** ixgbe_setup_sfp_modules_X550em - Setup SFP module
+ * @hw: pointer to hardware structure
+ */
+static s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
+{
+	bool setup_linear;
+	u16 reg_slice, edc_mode;
+	s32 ret_val;
+
+	switch (hw->phy.sfp_type) {
+	case ixgbe_sfp_type_unknown:
+		return 0;
+	case ixgbe_sfp_type_not_present:
+		return IXGBE_ERR_SFP_NOT_PRESENT;
+	case ixgbe_sfp_type_da_cu_core0:
+	case ixgbe_sfp_type_da_cu_core1:
+		setup_linear = true;
+		break;
+	case ixgbe_sfp_type_srlr_core0:
+	case ixgbe_sfp_type_srlr_core1:
+	case ixgbe_sfp_type_da_act_lmt_core0:
+	case ixgbe_sfp_type_da_act_lmt_core1:
+	case ixgbe_sfp_type_1g_sx_core0:
+	case ixgbe_sfp_type_1g_sx_core1:
+		setup_linear = false;
+		break;
+	default:
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+	}
+
+	ixgbe_init_mac_link_ops_X550em(hw);
+	hw->phy.ops.reset = NULL;
+
+	/* The CS4227 slice address is the base address + the port-pair reg
+	 * offset. I.e. Slice 0 = 0x12B0 and slice 1 = 0x22B0.
+	 */
+	reg_slice = IXGBE_CS4227_SPARE24_LSB + (hw->bus.lan_id << 12);
+
+	if (setup_linear)
+		edc_mode = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+	else
+		edc_mode = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+
+	/* Configure CS4227 for connection type. */
+	ret_val = hw->phy.ops.write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
+						 edc_mode);
+
+	if (ret_val)
+		ret_val = hw->phy.ops.write_i2c_combined(hw, 0x80, reg_slice,
+							 edc_mode);
+
+	return ret_val;
+}
+
+/** ixgbe_get_link_capabilities_x550em - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: true when autoneg or autotry is enabled
+ **/
+static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
+					      ixgbe_link_speed *speed,
+					      bool *autoneg)
+{
+	/* SFP */
+	if (hw->phy.media_type == ixgbe_media_type_fiber) {
+		/* CS4227 SFP must not enable auto-negotiation */
+		*autoneg = false;
+
+		if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+		    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
+			*speed = IXGBE_LINK_SPEED_1GB_FULL;
+			return 0;
+		}
+
+		/* Link capabilities are based on SFP */
+		if (hw->phy.multispeed_fiber)
+			*speed = IXGBE_LINK_SPEED_10GB_FULL |
+				 IXGBE_LINK_SPEED_1GB_FULL;
+		else
+			*speed = IXGBE_LINK_SPEED_10GB_FULL;
+	} else {
+		*speed = IXGBE_LINK_SPEED_10GB_FULL |
+			 IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = true;
+	}
+	return 0;
+}
+
+/** ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the
+ *  IOSF device
+ *
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 3 bit device type
+ *  @data: Data to write to the register
+ **/
+static s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
+					u32 device_type, u32 data)
+{
+	u32 i, command, error;
+
+	command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
+		   (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
+
+	/* Write IOSF control register */
+	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
+
+	/* Write IOSF data register */
+	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data);
+
+	/* Check every 10 usec to see if the address cycle completed.
+	 * The SB IOSF BUSY bit will clear when the operation is
+	 * complete
+	 */
+	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+		usleep_range(10, 20);
+
+		command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
+		if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
+			break;
+	}
+
+	if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
+		error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
+			 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
+		hw_dbg(hw, "Failed to write, error %x\n", error);
+		return IXGBE_ERR_PHY;
+	}
+
+	if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
+		hw_dbg(hw, "Write timed out\n");
+		return IXGBE_ERR_PHY;
+	}
+
+	return 0;
+}
+
+/** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
+ *  @hw: pointer to hardware structure
+ *  @speed: the link speed to force
+ *
+ *  Configures the integrated KR PHY to use iXFI mode. Used to connect an
+ *  internal and external PHY at a specific speed, without autonegotiation.
+ **/
+static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
+{
+	s32 status;
+	u32 reg_val;
+
+	/* Disable AN and force speed to 10G Serial. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+
+	/* Select forced link speed for internal PHY. */
+	switch (*speed) {
+	case IXGBE_LINK_SPEED_10GB_FULL:
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
+		break;
+	case IXGBE_LINK_SPEED_1GB_FULL:
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
+		break;
+	default:
+		/* Other link speeds are not supported by internal KR PHY. */
+		return IXGBE_ERR_LINK_SETUP;
+	}
+
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status)
+		return status;
+
+	/* Disable training protocol FSM. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status)
+		return status;
+
+	/* Disable Flex from training TXFFE. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status)
+		return status;
+
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
+	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status)
+		return status;
+
+	/* Enable override for coefficients. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN;
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN;
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
+	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status)
+		return status;
+
+	/* Toggle port SW reset by AN reset. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	return status;
+}
+
+/** ixgbe_setup_kx4_x550em - Configure the KX4 PHY.
+ *  @hw: pointer to hardware structure
+ *
+ *   Configures the integrated KX4 PHY.
+ **/
+static s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u32 reg_val;
+
+	status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+					     IXGBE_SB_IOSF_TARGET_KX4_PCS0 +
+					     hw->bus.lan_id, &reg_val);
+	if (status)
+		return status;
+
+	reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 |
+		     IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX);
+
+	reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE;
+
+	/* Advertise 10G support. */
+	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+		reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4;
+
+	/* Advertise 1G support. */
+	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+		reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX;
+
+	/* Restart auto-negotiation. */
+	reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART;
+	status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+					      IXGBE_SB_IOSF_TARGET_KX4_PCS0 +
+					      hw->bus.lan_id, reg_val);
+
+	return status;
+}
+
+/**  ixgbe_setup_kr_x550em - Configure the KR PHY.
+ *   @hw: pointer to hardware structure
+ *
+ *   Configures the integrated KR PHY.
+ **/
+static s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u32 reg_val;
+
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ;
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
+	reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR |
+		     IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX);
+
+	/* Advertise 10G support. */
+	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR;
+
+	/* Advertise 1G support. */
+	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
+
+	/* Restart auto-negotiation. */
+	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+	status = ixgbe_write_iosf_sb_reg_x550(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	return status;
+}
+
+/** ixgbe_setup_internal_phy_x550em - Configure integrated KR PHY
+ *  @hw: point to hardware structure
+ *
+ *  Configures the integrated KR PHY to talk to the external PHY. The base
+ *  driver will call this function when it gets notification via interrupt from
+ *  the external PHY. This function forces the internal PHY into iXFI mode at
+ *  the correct speed.
+ *
+ *  A return of a non-zero value indicates an error, and the base driver should
+ *  not report link up.
+ **/
+static s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw)
+{
+	u32 status;
+	u16 lasi, autoneg_status, speed;
+	ixgbe_link_speed force_speed;
+
+	/* Verify that the external link status has changed */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_XENPAK_LASI_STATUS,
+				      IXGBE_MDIO_PMA_PMD_DEV_TYPE, &lasi);
+	if (status)
+		return status;
+
+	/* If there was no change in link status, we can just exit */
+	if (!(lasi & IXGBE_XENPAK_LASI_LINK_STATUS_ALARM))
+		return 0;
+
+	/* we read this twice back to back to indicate current status */
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &autoneg_status);
+	if (status)
+		return status;
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &autoneg_status);
+	if (status)
+		return status;
+
+	/* If link is not up return an error indicating treat link as down */
+	if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
+
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
+				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      &speed);
+
+	/* clear everything but the speed and duplex bits */
+	speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK;
+
+	switch (speed) {
+	case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL:
+		force_speed = IXGBE_LINK_SPEED_10GB_FULL;
+		break;
+	case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL:
+		force_speed = IXGBE_LINK_SPEED_1GB_FULL;
+		break;
+	default:
+		/* Internal PHY does not support anything else */
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
+	}
+
+	return ixgbe_setup_ixfi_x550em(hw, &force_speed);
+}
+
+/** ixgbe_init_phy_ops_X550em - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during init_shared_code because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ **/
+static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
+{
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u32 esdp;
+
+	if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) {
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
+
+		if (hw->bus.lan_id) {
+			esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
+			esdp |= IXGBE_ESDP_SDP1_DIR;
+		}
+		esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+	}
+
+	/* Identify the PHY or SFP module */
+	ret_val = phy->ops.identify(hw);
+
+	/* Setup function pointers based on detected SFP module and speeds */
+	ixgbe_init_mac_link_ops_X550em(hw);
+	if (phy->sfp_type != ixgbe_sfp_type_unknown)
+		phy->ops.reset = NULL;
+
+	/* Set functions pointers based on phy type */
+	switch (hw->phy.type) {
+	case ixgbe_phy_x550em_kx4:
+		phy->ops.setup_link = ixgbe_setup_kx4_x550em;
+		phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+		phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+		break;
+	case ixgbe_phy_x550em_kr:
+		phy->ops.setup_link = ixgbe_setup_kr_x550em;
+		phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+		phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+		break;
+	case ixgbe_phy_x550em_ext_t:
+		phy->ops.setup_internal_link = ixgbe_setup_internal_phy_x550em;
+		break;
+	default:
+		break;
+	}
+	return ret_val;
+}
+
+/** ixgbe_get_media_type_X550em - Get media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ *
+ */
+static enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
+{
+	enum ixgbe_media_type media_type;
+
+	/* Detect if there is a copper PHY attached. */
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_X550EM_X_KR:
+	case IXGBE_DEV_ID_X550EM_X_KX4:
+		media_type = ixgbe_media_type_backplane;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_SFP:
+		media_type = ixgbe_media_type_fiber;
+		break;
+	case IXGBE_DEV_ID_X550EM_X_1G_T:
+	case IXGBE_DEV_ID_X550EM_X_10G_T:
+		 media_type = ixgbe_media_type_copper;
+		break;
+	default:
+		media_type = ixgbe_media_type_unknown;
+		break;
+	}
+	return media_type;
+}
+
+/** ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
+ ** @hw: pointer to hardware structure
+ **/
+static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
+{
+	u32 status;
+	u16 reg;
+	u32 retries = 2;
+
+	do {
+		/* decrement retries counter and exit if we hit 0 */
+		if (retries < 1) {
+			hw_dbg(hw, "External PHY not yet finished resetting.");
+			return IXGBE_ERR_PHY;
+		}
+		retries--;
+
+		status = hw->phy.ops.read_reg(hw,
+					      IXGBE_MDIO_TX_VENDOR_ALARMS_3,
+					      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+					      &reg);
+		if (status)
+			return status;
+
+		/* Verify PHY FW reset has completed */
+	} while ((reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) != 1);
+
+	/* Set port to low power mode */
+	status = hw->phy.ops.read_reg(hw,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      &reg);
+	if (status)
+		return status;
+
+	/* Enable the transmitter */
+	status = hw->phy.ops.read_reg(hw,
+				      IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR,
+				      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				      &reg);
+	if (status)
+		return status;
+
+	reg &= ~IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE;
+
+	status = hw->phy.ops.write_reg(hw,
+				       IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR,
+				       IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				       reg);
+	if (status)
+		return status;
+
+	/* Un-stall the PHY FW */
+	status = hw->phy.ops.read_reg(hw,
+				      IXGBE_MDIO_GLOBAL_RES_PR_10,
+				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      &reg);
+	if (status)
+		return status;
+
+	reg &= ~IXGBE_MDIO_POWER_UP_STALL;
+
+	status = hw->phy.ops.write_reg(hw,
+				       IXGBE_MDIO_GLOBAL_RES_PR_10,
+				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       reg);
+	return status;
+}
+
+/**  ixgbe_reset_hw_X550em - Perform hardware reset
+ **  @hw: pointer to hardware structure
+ **
+ **  Resets the hardware by resetting the transmit and receive units, masks
+ **  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ **  reset.
+ **/
+static s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
+{
+	ixgbe_link_speed link_speed;
+	s32 status;
+	u32 ctrl = 0;
+	u32 i;
+	bool link_up = false;
+
+	/* Call adapter stop to disable Tx/Rx and clear interrupts */
+	status = hw->mac.ops.stop_adapter(hw);
+	if (status)
+		return status;
+
+	/* flush pending Tx transactions */
+	ixgbe_clear_tx_pending(hw);
+
+	/* PHY ops must be identified and initialized prior to reset */
+
+	/* Identify PHY and related function pointers */
+	status = hw->phy.ops.init(hw);
+
+	/* start the external PHY */
+	if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
+		status = ixgbe_init_ext_t_x550em(hw);
+		if (status)
+			return status;
+	}
+
+	/* Setup SFP module if there is one present. */
+	if (hw->phy.sfp_setup_needed) {
+		status = hw->mac.ops.setup_sfp(hw);
+		hw->phy.sfp_setup_needed = false;
+	}
+
+	/* Reset PHY */
+	if (!hw->phy.reset_disable && hw->phy.ops.reset)
+		hw->phy.ops.reset(hw);
+
+mac_reset_top:
+	/* Issue global reset to the MAC.  Needs to be SW reset if link is up.
+	 * If link reset is used when link is up, it might reset the PHY when
+	 * mng is using it.  If link is down or the flag to force full link
+	 * reset is set, then perform link reset.
+	 */
+	ctrl = IXGBE_CTRL_LNK_RST;
+
+	if (!hw->force_full_reset) {
+		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+		if (link_up)
+			ctrl = IXGBE_CTRL_RST;
+	}
+
+	ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear meaning reset is complete */
+	for (i = 0; i < 10; i++) {
+		udelay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST_MASK))
+			break;
+	}
+
+	if (ctrl & IXGBE_CTRL_RST_MASK) {
+		status = IXGBE_ERR_RESET_FAILED;
+		hw_dbg(hw, "Reset polling failed to complete.\n");
+	}
+
+	msleep(50);
+
+	/* Double resets are required for recovery from certain error
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+		goto mac_reset_top;
+	}
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/* Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = 128;
+	hw->mac.ops.init_rx_addrs(hw);
+
+	return status;
+}
+
+/** ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype
+ *	anti-spoofing
+ *  @hw:  pointer to hardware structure
+ *  @enable: enable or disable switch for Ethertype anti-spoofing
+ *  @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
+ **/
+static void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
+						   bool enable, int vf)
+{
+	int vf_target_reg = vf >> 3;
+	int vf_target_shift = vf % 8 + IXGBE_SPOOF_ETHERTYPEAS_SHIFT;
+	u32 pfvfspoof;
+
+	pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
+	if (enable)
+		pfvfspoof |= (1 << vf_target_shift);
+	else
+		pfvfspoof &= ~(1 << vf_target_shift);
+
+	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
+}
+
+/** ixgbe_set_source_address_pruning_X550 - Enable/Disbale src address pruning
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable source address pruning
+ *  @pool: Rx pool to set source address pruning for
+ **/
+static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw,
+						  bool enable,
+						  unsigned int pool)
+{
+	u64 pfflp;
+
+	/* max rx pool is 63 */
+	if (pool > 63)
+		return;
+
+	pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL);
+	pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32;
+
+	if (enable)
+		pfflp |= (1ULL << pool);
+	else
+		pfflp &= ~(1ULL << pool);
+
+	IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp);
+	IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32));
+}
+
+#define X550_COMMON_MAC \
+	.init_hw			= &ixgbe_init_hw_generic, \
+	.start_hw			= &ixgbe_start_hw_X540, \
+	.clear_hw_cntrs			= &ixgbe_clear_hw_cntrs_generic, \
+	.enable_rx_dma			= &ixgbe_enable_rx_dma_generic, \
+	.get_mac_addr			= &ixgbe_get_mac_addr_generic, \
+	.get_device_caps		= &ixgbe_get_device_caps_generic, \
+	.stop_adapter			= &ixgbe_stop_adapter_generic, \
+	.get_bus_info			= &ixgbe_get_bus_info_generic, \
+	.set_lan_id			= &ixgbe_set_lan_id_multi_port_pcie, \
+	.read_analog_reg8		= NULL, \
+	.write_analog_reg8		= NULL, \
+	.set_rxpba			= &ixgbe_set_rxpba_generic, \
+	.check_link			= &ixgbe_check_mac_link_generic, \
+	.led_on				= &ixgbe_led_on_generic, \
+	.led_off			= &ixgbe_led_off_generic, \
+	.blink_led_start		= &ixgbe_blink_led_start_X540, \
+	.blink_led_stop			= &ixgbe_blink_led_stop_X540, \
+	.set_rar			= &ixgbe_set_rar_generic, \
+	.clear_rar			= &ixgbe_clear_rar_generic, \
+	.set_vmdq			= &ixgbe_set_vmdq_generic, \
+	.set_vmdq_san_mac		= &ixgbe_set_vmdq_san_mac_generic, \
+	.clear_vmdq			= &ixgbe_clear_vmdq_generic, \
+	.init_rx_addrs			= &ixgbe_init_rx_addrs_generic, \
+	.update_mc_addr_list		= &ixgbe_update_mc_addr_list_generic, \
+	.enable_mc			= &ixgbe_enable_mc_generic, \
+	.disable_mc			= &ixgbe_disable_mc_generic, \
+	.clear_vfta			= &ixgbe_clear_vfta_generic, \
+	.set_vfta			= &ixgbe_set_vfta_generic, \
+	.fc_enable			= &ixgbe_fc_enable_generic, \
+	.set_fw_drv_ver			= &ixgbe_set_fw_drv_ver_generic, \
+	.init_uta_tables		= &ixgbe_init_uta_tables_generic, \
+	.set_mac_anti_spoofing		= &ixgbe_set_mac_anti_spoofing, \
+	.set_vlan_anti_spoofing		= &ixgbe_set_vlan_anti_spoofing, \
+	.set_source_address_pruning	= \
+				&ixgbe_set_source_address_pruning_X550, \
+	.set_ethertype_anti_spoofing	= \
+				&ixgbe_set_ethertype_anti_spoofing_X550, \
+	.acquire_swfw_sync		= &ixgbe_acquire_swfw_sync_X540, \
+	.release_swfw_sync		= &ixgbe_release_swfw_sync_X540, \
+	.disable_rx_buff		= &ixgbe_disable_rx_buff_generic, \
+	.enable_rx_buff			= &ixgbe_enable_rx_buff_generic, \
+	.get_thermal_sensor_data	= NULL, \
+	.init_thermal_sensor_thresh	= NULL, \
+	.prot_autoc_read		= &prot_autoc_read_generic, \
+	.prot_autoc_write		= &prot_autoc_write_generic, \
+	.enable_rx			= &ixgbe_enable_rx_generic, \
+	.disable_rx			= &ixgbe_disable_rx_x550, \
+
+static struct ixgbe_mac_operations mac_ops_X550 = {
+	X550_COMMON_MAC
+	.reset_hw		= &ixgbe_reset_hw_X540,
+	.get_media_type		= &ixgbe_get_media_type_X540,
+	.get_san_mac_addr	= &ixgbe_get_san_mac_addr_generic,
+	.get_wwn_prefix		= &ixgbe_get_wwn_prefix_generic,
+	.setup_link		= &ixgbe_setup_mac_link_X540,
+	.get_link_capabilities	= &ixgbe_get_copper_link_capabilities_generic,
+	.setup_sfp		= NULL,
+};
+
+static struct ixgbe_mac_operations mac_ops_X550EM_x = {
+	X550_COMMON_MAC
+	.reset_hw		= &ixgbe_reset_hw_X550em,
+	.get_media_type		= &ixgbe_get_media_type_X550em,
+	.get_san_mac_addr	= NULL,
+	.get_wwn_prefix		= NULL,
+	.setup_link		= NULL, /* defined later */
+	.get_link_capabilities	= &ixgbe_get_link_capabilities_X550em,
+	.setup_sfp		= ixgbe_setup_sfp_modules_X550em,
+
+};
+
+#define X550_COMMON_EEP \
+	.read			= &ixgbe_read_ee_hostif_X550, \
+	.read_buffer		= &ixgbe_read_ee_hostif_buffer_X550, \
+	.write			= &ixgbe_write_ee_hostif_X550, \
+	.write_buffer		= &ixgbe_write_ee_hostif_buffer_X550, \
+	.validate_checksum	= &ixgbe_validate_eeprom_checksum_X550, \
+	.update_checksum	= &ixgbe_update_eeprom_checksum_X550, \
+	.calc_checksum		= &ixgbe_calc_eeprom_checksum_X550, \
+
+static struct ixgbe_eeprom_operations eeprom_ops_X550 = {
+	X550_COMMON_EEP
+	.init_params		= &ixgbe_init_eeprom_params_X550,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = {
+	X550_COMMON_EEP
+	.init_params		= &ixgbe_init_eeprom_params_X540,
+};
+
+#define X550_COMMON_PHY	\
+	.identify_sfp		= &ixgbe_identify_module_generic, \
+	.reset			= NULL, \
+	.setup_link_speed	= &ixgbe_setup_phy_link_speed_generic, \
+	.read_i2c_byte		= &ixgbe_read_i2c_byte_generic, \
+	.write_i2c_byte		= &ixgbe_write_i2c_byte_generic, \
+	.read_i2c_sff8472	= &ixgbe_read_i2c_sff8472_generic, \
+	.read_i2c_eeprom	= &ixgbe_read_i2c_eeprom_generic, \
+	.write_i2c_eeprom	= &ixgbe_write_i2c_eeprom_generic, \
+	.check_overtemp		= &ixgbe_tn_check_overtemp, \
+	.get_firmware_version	= &ixgbe_get_phy_firmware_version_generic,
+
+static struct ixgbe_phy_operations phy_ops_X550 = {
+	X550_COMMON_PHY
+	.init			= NULL,
+	.identify		= &ixgbe_identify_phy_generic,
+	.read_reg		= &ixgbe_read_phy_reg_generic,
+	.write_reg		= &ixgbe_write_phy_reg_generic,
+	.setup_link		= &ixgbe_setup_phy_link_generic,
+	.read_i2c_combined	= &ixgbe_read_i2c_combined_generic,
+	.write_i2c_combined	= &ixgbe_write_i2c_combined_generic,
+};
+
+static struct ixgbe_phy_operations phy_ops_X550EM_x = {
+	X550_COMMON_PHY
+	.init			= &ixgbe_init_phy_ops_X550em,
+	.identify		= &ixgbe_identify_phy_x550em,
+	.read_reg		= NULL, /* defined later */
+	.write_reg		= NULL, /* defined later */
+	.setup_link		= NULL, /* defined later */
+};
+
+struct ixgbe_info ixgbe_X550_info = {
+	.mac			= ixgbe_mac_X550,
+	.get_invariants		= &ixgbe_get_invariants_X540,
+	.mac_ops		= &mac_ops_X550,
+	.eeprom_ops		= &eeprom_ops_X550,
+	.phy_ops		= &phy_ops_X550,
+	.mbx_ops		= &mbx_ops_generic,
+};
+
+struct ixgbe_info ixgbe_X550EM_x_info = {
+	.mac			= ixgbe_mac_X550EM_x,
+	.get_invariants		= &ixgbe_get_invariants_X540,
+	.mac_ops		= &mac_ops_X550EM_x,
+	.eeprom_ops		= &eeprom_ops_X550EM_x,
+	.phy_ops		= &phy_ops_X550EM_x,
+	.mbx_ops		= &mbx_ops_generic,
+};