Initial import

1 files changed, 636 insertions, 0 deletions

diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c
new file mode 100644
index 000000000..d98f5b8a1
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/macsonic.c
@@ -0,0 +1,636 @@
+/*
+ * macsonic.c
+ *
+ * (C) 2005 Finn Thain
+ *
+ * Converted to DMA API, converted to unified driver model, made it work as
+ * a module again, and from the mac68k project, introduced more 32-bit cards
+ * and dhd's support for 16-bit cards.
+ *
+ * (C) 1998 Alan Cox
+ *
+ * Debugging Andreas Ehliar, Michael Schmitz
+ *
+ * Based on code
+ * (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de)
+ *
+ * This driver is based on work from Andreas Busse, but most of
+ * the code is rewritten.
+ *
+ * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
+ *
+ * A driver for the Mac onboard Sonic ethernet chip.
+ *
+ * 98/12/21 MSch: judged from tests on Q800, it's basically working,
+ *		  but eating up both receive and transmit resources
+ *		  and duplicating packets. Needs more testing.
+ *
+ * 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed.
+ *
+ * 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems
+ *          on centris.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/gfp.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/nubus.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitrev.h>
+#include <linux/slab.h>
+
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/hwtest.h>
+#include <asm/dma.h>
+#include <asm/macintosh.h>
+#include <asm/macints.h>
+#include <asm/mac_via.h>
+
+static char mac_sonic_string[] = "macsonic";
+
+#include "sonic.h"
+
+/* These should basically be bus-size and endian independent (since
+   the SONIC is at least smart enough that it uses the same endianness
+   as the host, unlike certain less enlightened Macintosh NICs) */
+#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \
+	      + lp->reg_offset))
+#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \
+	      + lp->reg_offset))
+
+/* use 0 for production, 1 for verification, >1 for debug */
+#ifdef SONIC_DEBUG
+static unsigned int sonic_debug = SONIC_DEBUG;
+#else
+static unsigned int sonic_debug = 1;
+#endif
+
+static int sonic_version_printed;
+
+/* For onboard SONIC */
+#define ONBOARD_SONIC_REGISTERS	0x50F0A000
+#define ONBOARD_SONIC_PROM_BASE	0x50f08000
+
+enum macsonic_type {
+	MACSONIC_DUODOCK,
+	MACSONIC_APPLE,
+	MACSONIC_APPLE16,
+	MACSONIC_DAYNA,
+	MACSONIC_DAYNALINK
+};
+
+/* For the built-in SONIC in the Duo Dock */
+#define DUODOCK_SONIC_REGISTERS 0xe10000
+#define DUODOCK_SONIC_PROM_BASE 0xe12000
+
+/* For Apple-style NuBus SONIC */
+#define APPLE_SONIC_REGISTERS	0
+#define APPLE_SONIC_PROM_BASE	0x40000
+
+/* Daynalink LC SONIC */
+#define DAYNALINK_PROM_BASE 0x400000
+
+/* For Dayna-style NuBus SONIC (haven't seen one yet) */
+#define DAYNA_SONIC_REGISTERS   0x180000
+/* This is what OpenBSD says.  However, this is definitely in NuBus
+   ROM space so we should be able to get it by walking the NuBus
+   resource directories */
+#define DAYNA_SONIC_MAC_ADDR	0xffe004
+
+#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr)
+
+/*
+ * For reversing the PROM address
+ */
+
+static inline void bit_reverse_addr(unsigned char addr[6])
+{
+	int i;
+
+	for(i = 0; i < 6; i++)
+		addr[i] = bitrev8(addr[i]);
+}
+
+static irqreturn_t macsonic_interrupt(int irq, void *dev_id)
+{
+	irqreturn_t result;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	result = sonic_interrupt(irq, dev_id);
+	local_irq_restore(flags);
+	return result;
+}
+
+static int macsonic_open(struct net_device* dev)
+{
+	int retval;
+
+	retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev);
+	if (retval) {
+		printk(KERN_ERR "%s: unable to get IRQ %d.\n",
+				dev->name, dev->irq);
+		goto err;
+	}
+	/* Under the A/UX interrupt scheme, the onboard SONIC interrupt comes
+	 * in at priority level 3. However, we sometimes get the level 2 inter-
+	 * rupt as well, which must prevent re-entrance of the sonic handler.
+	 */
+	if (dev->irq == IRQ_AUTO_3) {
+		retval = request_irq(IRQ_NUBUS_9, macsonic_interrupt, 0,
+				     "sonic", dev);
+		if (retval) {
+			printk(KERN_ERR "%s: unable to get IRQ %d.\n",
+					dev->name, IRQ_NUBUS_9);
+			goto err_irq;
+		}
+	}
+	retval = sonic_open(dev);
+	if (retval)
+		goto err_irq_nubus;
+	return 0;
+
+err_irq_nubus:
+	if (dev->irq == IRQ_AUTO_3)
+		free_irq(IRQ_NUBUS_9, dev);
+err_irq:
+	free_irq(dev->irq, dev);
+err:
+	return retval;
+}
+
+static int macsonic_close(struct net_device* dev)
+{
+	int err;
+	err = sonic_close(dev);
+	free_irq(dev->irq, dev);
+	if (dev->irq == IRQ_AUTO_3)
+		free_irq(IRQ_NUBUS_9, dev);
+	return err;
+}
+
+static const struct net_device_ops macsonic_netdev_ops = {
+	.ndo_open		= macsonic_open,
+	.ndo_stop		= macsonic_close,
+	.ndo_start_xmit		= sonic_send_packet,
+	.ndo_set_rx_mode	= sonic_multicast_list,
+	.ndo_tx_timeout		= sonic_tx_timeout,
+	.ndo_get_stats		= sonic_get_stats,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
+static int macsonic_init(struct net_device *dev)
+{
+	struct sonic_local* lp = netdev_priv(dev);
+
+	/* Allocate the entire chunk of memory for the descriptors.
+           Note that this cannot cross a 64K boundary. */
+	lp->descriptors = dma_alloc_coherent(lp->device,
+					     SIZEOF_SONIC_DESC *
+					     SONIC_BUS_SCALE(lp->dma_bitmode),
+					     &lp->descriptors_laddr,
+					     GFP_KERNEL);
+	if (lp->descriptors == NULL)
+		return -ENOMEM;
+
+	/* Now set up the pointers to point to the appropriate places */
+	lp->cda = lp->descriptors;
+	lp->tda = lp->cda + (SIZEOF_SONIC_CDA
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+	lp->cda_laddr = lp->descriptors_laddr;
+	lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+	dev->netdev_ops = &macsonic_netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	/*
+	 * clear tally counter
+	 */
+	SONIC_WRITE(SONIC_CRCT, 0xffff);
+	SONIC_WRITE(SONIC_FAET, 0xffff);
+	SONIC_WRITE(SONIC_MPT, 0xffff);
+
+	return 0;
+}
+
+#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \
+                          memcmp(mac, "\x00\xA0\x40", 3) && \
+                          memcmp(mac, "\x00\x80\x19", 3) && \
+                          memcmp(mac, "\x00\x05\x02", 3))
+
+static void mac_onboard_sonic_ethernet_addr(struct net_device *dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	const int prom_addr = ONBOARD_SONIC_PROM_BASE;
+	unsigned short val;
+
+	/*
+	 * On NuBus boards we can sometimes look in the ROM resources.
+	 * No such luck for comm-slot/onboard.
+	 * On the PowerBook 520, the PROM base address is a mystery.
+	 */
+	if (hwreg_present((void *)prom_addr)) {
+		int i;
+
+		for (i = 0; i < 6; i++)
+			dev->dev_addr[i] = SONIC_READ_PROM(i);
+		if (!INVALID_MAC(dev->dev_addr))
+			return;
+
+		/*
+		 * Most of the time, the address is bit-reversed. The NetBSD
+		 * source has a rather long and detailed historical account of
+		 * why this is so.
+		 */
+		bit_reverse_addr(dev->dev_addr);
+		if (!INVALID_MAC(dev->dev_addr))
+			return;
+
+		/*
+		 * If we still have what seems to be a bogus address, we'll
+		 * look in the CAM. The top entry should be ours.
+		 */
+		printk(KERN_WARNING "macsonic: MAC address in PROM seems "
+		                    "to be invalid, trying CAM\n");
+	} else {
+		printk(KERN_WARNING "macsonic: cannot read MAC address from "
+		                    "PROM, trying CAM\n");
+	}
+
+	/* This only works if MacOS has already initialized the card. */
+
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+	SONIC_WRITE(SONIC_CEP, 15);
+
+	val = SONIC_READ(SONIC_CAP2);
+	dev->dev_addr[5] = val >> 8;
+	dev->dev_addr[4] = val & 0xff;
+	val = SONIC_READ(SONIC_CAP1);
+	dev->dev_addr[3] = val >> 8;
+	dev->dev_addr[2] = val & 0xff;
+	val = SONIC_READ(SONIC_CAP0);
+	dev->dev_addr[1] = val >> 8;
+	dev->dev_addr[0] = val & 0xff;
+
+	if (!INVALID_MAC(dev->dev_addr))
+		return;
+
+	/* Still nonsense ... messed up someplace! */
+
+	printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 "
+	                    "seems invalid, will use a random MAC\n");
+	eth_hw_addr_random(dev);
+}
+
+static int mac_onboard_sonic_probe(struct net_device *dev)
+{
+	struct sonic_local* lp = netdev_priv(dev);
+	int sr;
+	int commslot = 0;
+
+	if (!MACH_IS_MAC)
+		return -ENODEV;
+
+	printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. ");
+
+	/* Bogus probing, on the models which may or may not have
+	   Ethernet (BTW, the Ethernet *is* always at the same
+	   address, and nothing else lives there, at least if Apple's
+	   documentation is to be believed) */
+	if (macintosh_config->ident == MAC_MODEL_Q630 ||
+	    macintosh_config->ident == MAC_MODEL_P588 ||
+	    macintosh_config->ident == MAC_MODEL_P575 ||
+	    macintosh_config->ident == MAC_MODEL_C610) {
+		int card_present;
+
+		card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS);
+		if (!card_present) {
+			printk("none.\n");
+			return -ENODEV;
+		}
+		commslot = 1;
+	}
+
+	printk("yes\n");
+
+	/* Danger!  My arms are flailing wildly!  You *must* set lp->reg_offset
+	 * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
+	dev->base_addr = ONBOARD_SONIC_REGISTERS;
+	if (via_alt_mapping)
+		dev->irq = IRQ_AUTO_3;
+	else
+		dev->irq = IRQ_NUBUS_9;
+
+	if (!sonic_version_printed) {
+		printk(KERN_INFO "%s", version);
+		sonic_version_printed = 1;
+	}
+	printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n",
+	       dev_name(lp->device), dev->base_addr);
+
+	/* The PowerBook's SONIC is 16 bit always. */
+	if (macintosh_config->ident == MAC_MODEL_PB520) {
+		lp->reg_offset = 0;
+		lp->dma_bitmode = SONIC_BITMODE16;
+		sr = SONIC_READ(SONIC_SR);
+	} else if (commslot) {
+		/* Some of the comm-slot cards are 16 bit.  But some
+		   of them are not.  The 32-bit cards use offset 2 and
+		   have known revisions, we try reading the revision
+		   register at offset 2, if we don't get a known revision
+		   we assume 16 bit at offset 0.  */
+		lp->reg_offset = 2;
+		lp->dma_bitmode = SONIC_BITMODE16;
+
+		sr = SONIC_READ(SONIC_SR);
+		if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101)
+			/* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */
+			lp->dma_bitmode = SONIC_BITMODE32;
+		else {
+			lp->dma_bitmode = SONIC_BITMODE16;
+			lp->reg_offset = 0;
+			sr = SONIC_READ(SONIC_SR);
+		}
+	} else {
+		/* All onboard cards are at offset 2 with 32 bit DMA. */
+		lp->reg_offset = 2;
+		lp->dma_bitmode = SONIC_BITMODE32;
+		sr = SONIC_READ(SONIC_SR);
+	}
+	printk(KERN_INFO
+	       "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
+	       dev_name(lp->device), sr, lp->dma_bitmode?32:16, lp->reg_offset);
+
+#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
+	printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
+	       SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
+#endif
+
+	/* Software reset, then initialize control registers. */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+
+	SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS |
+	                       SONIC_DCR_RFT1  | SONIC_DCR_TFT0 |
+	                       (lp->dma_bitmode ? SONIC_DCR_DW : 0));
+
+	/* This *must* be written back to in order to restore the
+	 * extended programmable output bits, as it may not have been
+	 * initialised since the hardware reset. */
+	SONIC_WRITE(SONIC_DCR2, 0);
+
+	/* Clear *and* disable interrupts to be on the safe side */
+	SONIC_WRITE(SONIC_IMR, 0);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
+
+	/* Now look for the MAC address. */
+	mac_onboard_sonic_ethernet_addr(dev);
+
+	/* Shared init code */
+	return macsonic_init(dev);
+}
+
+static int mac_nubus_sonic_ethernet_addr(struct net_device *dev,
+					 unsigned long prom_addr, int id)
+{
+	int i;
+	for(i = 0; i < 6; i++)
+		dev->dev_addr[i] = SONIC_READ_PROM(i);
+
+	/* Some of the addresses are bit-reversed */
+	if (id != MACSONIC_DAYNA)
+		bit_reverse_addr(dev->dev_addr);
+
+	return 0;
+}
+
+static int macsonic_ident(struct nubus_dev *ndev)
+{
+	if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC &&
+	    ndev->dr_sw == NUBUS_DRSW_SONIC_LC)
+		return MACSONIC_DAYNALINK;
+	if (ndev->dr_hw == NUBUS_DRHW_SONIC &&
+	    ndev->dr_sw == NUBUS_DRSW_APPLE) {
+		/* There has to be a better way to do this... */
+		if (strstr(ndev->board->name, "DuoDock"))
+			return MACSONIC_DUODOCK;
+		else
+			return MACSONIC_APPLE;
+	}
+
+	if (ndev->dr_hw == NUBUS_DRHW_SMC9194 &&
+	    ndev->dr_sw == NUBUS_DRSW_DAYNA)
+		return MACSONIC_DAYNA;
+
+	if (ndev->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC &&
+	    ndev->dr_sw == 0) { /* huh? */
+		return MACSONIC_APPLE16;
+	}
+	return -1;
+}
+
+static int mac_nubus_sonic_probe(struct net_device *dev)
+{
+	static int slots;
+	struct nubus_dev* ndev = NULL;
+	struct sonic_local* lp = netdev_priv(dev);
+	unsigned long base_addr, prom_addr;
+	u16 sonic_dcr;
+	int id = -1;
+	int reg_offset, dma_bitmode;
+
+	/* Find the first SONIC that hasn't been initialized already */
+	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK,
+				       NUBUS_TYPE_ETHERNET, ndev)) != NULL)
+	{
+		/* Have we seen it already? */
+		if (slots & (1<<ndev->board->slot))
+			continue;
+		slots |= 1<<ndev->board->slot;
+
+		/* Is it one of ours? */
+		if ((id = macsonic_ident(ndev)) != -1)
+			break;
+	}
+
+	if (ndev == NULL)
+		return -ENODEV;
+
+	switch (id) {
+	case MACSONIC_DUODOCK:
+		base_addr = ndev->board->slot_addr + DUODOCK_SONIC_REGISTERS;
+		prom_addr = ndev->board->slot_addr + DUODOCK_SONIC_PROM_BASE;
+		sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 |
+		            SONIC_DCR_TFT0;
+		reg_offset = 2;
+		dma_bitmode = SONIC_BITMODE32;
+		break;
+	case MACSONIC_APPLE:
+		base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
+		prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
+		sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0;
+		reg_offset = 0;
+		dma_bitmode = SONIC_BITMODE32;
+		break;
+	case MACSONIC_APPLE16:
+		base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
+		prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
+		sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+		            SONIC_DCR_PO1 | SONIC_DCR_BMS;
+		reg_offset = 0;
+		dma_bitmode = SONIC_BITMODE16;
+		break;
+	case MACSONIC_DAYNALINK:
+		base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
+		prom_addr = ndev->board->slot_addr + DAYNALINK_PROM_BASE;
+		sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+		            SONIC_DCR_PO1 | SONIC_DCR_BMS;
+		reg_offset = 0;
+		dma_bitmode = SONIC_BITMODE16;
+		break;
+	case MACSONIC_DAYNA:
+		base_addr = ndev->board->slot_addr + DAYNA_SONIC_REGISTERS;
+		prom_addr = ndev->board->slot_addr + DAYNA_SONIC_MAC_ADDR;
+		sonic_dcr = SONIC_DCR_BMS |
+		            SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;
+		reg_offset = 0;
+		dma_bitmode = SONIC_BITMODE16;
+		break;
+	default:
+		printk(KERN_ERR "macsonic: WTF, id is %d\n", id);
+		return -ENODEV;
+	}
+
+	/* Danger!  My arms are flailing wildly!  You *must* set lp->reg_offset
+	 * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
+	dev->base_addr = base_addr;
+	lp->reg_offset = reg_offset;
+	lp->dma_bitmode = dma_bitmode;
+	dev->irq = SLOT2IRQ(ndev->board->slot);
+
+	if (!sonic_version_printed) {
+		printk(KERN_INFO "%s", version);
+		sonic_version_printed = 1;
+	}
+	printk(KERN_INFO "%s: %s in slot %X\n",
+	       dev_name(lp->device), ndev->board->name, ndev->board->slot);
+	printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
+	       dev_name(lp->device), SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset);
+
+#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
+	printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
+	       SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
+#endif
+
+	/* Software reset, then initialize control registers. */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+	SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0));
+	/* This *must* be written back to in order to restore the
+	 * extended programmable output bits, since it may not have been
+	 * initialised since the hardware reset. */
+	SONIC_WRITE(SONIC_DCR2, 0);
+
+	/* Clear *and* disable interrupts to be on the safe side */
+	SONIC_WRITE(SONIC_IMR, 0);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
+
+	/* Now look for the MAC address. */
+	if (mac_nubus_sonic_ethernet_addr(dev, prom_addr, id) != 0)
+		return -ENODEV;
+
+	/* Shared init code */
+	return macsonic_init(dev);
+}
+
+static int mac_sonic_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct sonic_local *lp;
+	int err;
+
+	dev = alloc_etherdev(sizeof(struct sonic_local));
+	if (!dev)
+		return -ENOMEM;
+
+	lp = netdev_priv(dev);
+	lp->device = &pdev->dev;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	platform_set_drvdata(pdev, dev);
+
+	/* This will catch fatal stuff like -ENOMEM as well as success */
+	err = mac_onboard_sonic_probe(dev);
+	if (err == 0)
+		goto found;
+	if (err != -ENODEV)
+		goto out;
+	err = mac_nubus_sonic_probe(dev);
+	if (err)
+		goto out;
+found:
+	err = register_netdev(dev);
+	if (err)
+		goto out;
+
+	printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq);
+
+	return 0;
+
+out:
+	free_netdev(dev);
+
+	return err;
+}
+
+MODULE_DESCRIPTION("Macintosh SONIC ethernet driver");
+module_param(sonic_debug, int, 0);
+MODULE_PARM_DESC(sonic_debug, "macsonic debug level (1-4)");
+MODULE_ALIAS("platform:macsonic");
+
+#include "sonic.c"
+
+static int mac_sonic_device_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct sonic_local* lp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+	                  lp->descriptors, lp->descriptors_laddr);
+	free_netdev(dev);
+
+	return 0;
+}
+
+static struct platform_driver mac_sonic_driver = {
+	.probe  = mac_sonic_probe,
+	.remove = mac_sonic_device_remove,
+	.driver	= {
+		.name	= mac_sonic_string,
+	},
+};
+
+module_platform_driver(mac_sonic_driver);