summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/sis/sis900.h
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/net/ethernet/sis/sis900.h
Initial import
Diffstat (limited to 'drivers/net/ethernet/sis/sis900.h')
-rw-r--r--drivers/net/ethernet/sis/sis900.h329
1 files changed, 329 insertions, 0 deletions
diff --git a/drivers/net/ethernet/sis/sis900.h b/drivers/net/ethernet/sis/sis900.h
new file mode 100644
index 000000000..1341f33e6
--- /dev/null
+++ b/drivers/net/ethernet/sis/sis900.h
@@ -0,0 +1,329 @@
+/* sis900.h Definitions for SiS ethernet controllers including 7014/7016 and 900
+ * Copyright 1999 Silicon Integrated System Corporation
+ * References:
+ * SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support,
+ * preliminary Rev. 1.0 Jan. 14, 1998
+ * SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support,
+ * preliminary Rev. 1.0 Nov. 10, 1998
+ * SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
+ * preliminary Rev. 1.0 Jan. 18, 1998
+ * http://www.sis.com.tw/support/databook.htm
+ */
+
+/*
+ * SiS 7016 and SiS 900 ethernet controller registers
+ */
+
+/* The I/O extent, SiS 900 needs 256 bytes of io address */
+#define SIS900_TOTAL_SIZE 0x100
+
+/* Symbolic offsets to registers. */
+enum sis900_registers {
+ cr=0x0, //Command Register
+ cfg=0x4, //Configuration Register
+ mear=0x8, //EEPROM Access Register
+ ptscr=0xc, //PCI Test Control Register
+ isr=0x10, //Interrupt Status Register
+ imr=0x14, //Interrupt Mask Register
+ ier=0x18, //Interrupt Enable Register
+ epar=0x18, //Enhanced PHY Access Register
+ txdp=0x20, //Transmit Descriptor Pointer Register
+ txcfg=0x24, //Transmit Configuration Register
+ rxdp=0x30, //Receive Descriptor Pointer Register
+ rxcfg=0x34, //Receive Configuration Register
+ flctrl=0x38, //Flow Control Register
+ rxlen=0x3c, //Receive Packet Length Register
+ rfcr=0x48, //Receive Filter Control Register
+ rfdr=0x4C, //Receive Filter Data Register
+ pmctrl=0xB0, //Power Management Control Register
+ pmer=0xB4 //Power Management Wake-up Event Register
+};
+
+/* Symbolic names for bits in various registers */
+enum sis900_command_register_bits {
+ RELOAD = 0x00000400, ACCESSMODE = 0x00000200,/* ET */
+ RESET = 0x00000100, SWI = 0x00000080, RxRESET = 0x00000020,
+ TxRESET = 0x00000010, RxDIS = 0x00000008, RxENA = 0x00000004,
+ TxDIS = 0x00000002, TxENA = 0x00000001
+};
+
+enum sis900_configuration_register_bits {
+ DESCRFMT = 0x00000100 /* 7016 specific */, REQALG = 0x00000080,
+ SB = 0x00000040, POW = 0x00000020, EXD = 0x00000010,
+ PESEL = 0x00000008, LPM = 0x00000004, BEM = 0x00000001,
+ /* 635 & 900B Specific */
+ RND_CNT = 0x00000400, FAIR_BACKOFF = 0x00000200,
+ EDB_MASTER_EN = 0x00002000
+};
+
+enum sis900_eeprom_access_reigster_bits {
+ MDC = 0x00000040, MDDIR = 0x00000020, MDIO = 0x00000010, /* 7016 specific */
+ EECS = 0x00000008, EECLK = 0x00000004, EEDO = 0x00000002,
+ EEDI = 0x00000001
+};
+
+enum sis900_interrupt_register_bits {
+ WKEVT = 0x10000000, TxPAUSEEND = 0x08000000, TxPAUSE = 0x04000000,
+ TxRCMP = 0x02000000, RxRCMP = 0x01000000, DPERR = 0x00800000,
+ SSERR = 0x00400000, RMABT = 0x00200000, RTABT = 0x00100000,
+ RxSOVR = 0x00010000, HIBERR = 0x00008000, SWINT = 0x00001000,
+ MIBINT = 0x00000800, TxURN = 0x00000400, TxIDLE = 0x00000200,
+ TxERR = 0x00000100, TxDESC = 0x00000080, TxOK = 0x00000040,
+ RxORN = 0x00000020, RxIDLE = 0x00000010, RxEARLY = 0x00000008,
+ RxERR = 0x00000004, RxDESC = 0x00000002, RxOK = 0x00000001
+};
+
+enum sis900_interrupt_enable_reigster_bits {
+ IE = 0x00000001
+};
+
+/* maximum dma burst for transmission and receive */
+#define MAX_DMA_RANGE 7 /* actually 0 means MAXIMUM !! */
+#define TxMXDMA_shift 20
+#define RxMXDMA_shift 20
+
+enum sis900_tx_rx_dma{
+ DMA_BURST_512 = 0, DMA_BURST_64 = 5
+};
+
+/* transmit FIFO thresholds */
+#define TX_FILL_THRESH 16 /* 1/4 FIFO size */
+#define TxFILLT_shift 8
+#define TxDRNT_shift 0
+#define TxDRNT_100 48 /* 3/4 FIFO size */
+#define TxDRNT_10 16 /* 1/2 FIFO size */
+
+enum sis900_transmit_config_register_bits {
+ TxCSI = 0x80000000, TxHBI = 0x40000000, TxMLB = 0x20000000,
+ TxATP = 0x10000000, TxIFG = 0x0C000000, TxFILLT = 0x00003F00,
+ TxDRNT = 0x0000003F
+};
+
+/* recevie FIFO thresholds */
+#define RxDRNT_shift 1
+#define RxDRNT_100 16 /* 1/2 FIFO size */
+#define RxDRNT_10 24 /* 3/4 FIFO size */
+
+enum sis900_reveive_config_register_bits {
+ RxAEP = 0x80000000, RxARP = 0x40000000, RxATX = 0x10000000,
+ RxAJAB = 0x08000000, RxDRNT = 0x0000007F
+};
+
+#define RFAA_shift 28
+#define RFADDR_shift 16
+
+enum sis900_receive_filter_control_register_bits {
+ RFEN = 0x80000000, RFAAB = 0x40000000, RFAAM = 0x20000000,
+ RFAAP = 0x10000000, RFPromiscuous = (RFAAB|RFAAM|RFAAP)
+};
+
+enum sis900_reveive_filter_data_mask {
+ RFDAT = 0x0000FFFF
+};
+
+/* EEPROM Addresses */
+enum sis900_eeprom_address {
+ EEPROMSignature = 0x00, EEPROMVendorID = 0x02, EEPROMDeviceID = 0x03,
+ EEPROMMACAddr = 0x08, EEPROMChecksum = 0x0b
+};
+
+/* The EEPROM commands include the alway-set leading bit. Refer to NM93Cxx datasheet */
+enum sis900_eeprom_command {
+ EEread = 0x0180, EEwrite = 0x0140, EEerase = 0x01C0,
+ EEwriteEnable = 0x0130, EEwriteDisable = 0x0100,
+ EEeraseAll = 0x0120, EEwriteAll = 0x0110,
+ EEaddrMask = 0x013F, EEcmdShift = 16
+};
+
+/* For SiS962 or SiS963, request the eeprom software access */
+enum sis96x_eeprom_command {
+ EEREQ = 0x00000400, EEDONE = 0x00000200, EEGNT = 0x00000100
+};
+
+/* PCI Registers */
+enum sis900_pci_registers {
+ CFGPMC = 0x40,
+ CFGPMCSR = 0x44
+};
+
+/* Power management capabilities bits */
+enum sis900_cfgpmc_register_bits {
+ PMVER = 0x00070000,
+ DSI = 0x00100000,
+ PMESP = 0xf8000000
+};
+
+enum sis900_pmesp_bits {
+ PME_D0 = 0x1,
+ PME_D1 = 0x2,
+ PME_D2 = 0x4,
+ PME_D3H = 0x8,
+ PME_D3C = 0x10
+};
+
+/* Power management control/status bits */
+enum sis900_cfgpmcsr_register_bits {
+ PMESTS = 0x00004000,
+ PME_EN = 0x00000100, // Power management enable
+ PWR_STA = 0x00000003 // Current power state
+};
+
+/* Wake-on-LAN support. */
+enum sis900_power_management_control_register_bits {
+ LINKLOSS = 0x00000001,
+ LINKON = 0x00000002,
+ MAGICPKT = 0x00000400,
+ ALGORITHM = 0x00000800,
+ FRM1EN = 0x00100000,
+ FRM2EN = 0x00200000,
+ FRM3EN = 0x00400000,
+ FRM1ACS = 0x01000000,
+ FRM2ACS = 0x02000000,
+ FRM3ACS = 0x04000000,
+ WAKEALL = 0x40000000,
+ GATECLK = 0x80000000
+};
+
+/* Management Data I/O (mdio) frame */
+#define MIIread 0x6000
+#define MIIwrite 0x5002
+#define MIIpmdShift 7
+#define MIIregShift 2
+#define MIIcmdLen 16
+#define MIIcmdShift 16
+
+/* Buffer Descriptor Status*/
+enum sis900_buffer_status {
+ OWN = 0x80000000, MORE = 0x40000000, INTR = 0x20000000,
+ SUPCRC = 0x10000000, INCCRC = 0x10000000,
+ OK = 0x08000000, DSIZE = 0x00000FFF
+};
+/* Status for TX Buffers */
+enum sis900_tx_buffer_status {
+ ABORT = 0x04000000, UNDERRUN = 0x02000000, NOCARRIER = 0x01000000,
+ DEFERD = 0x00800000, EXCDEFER = 0x00400000, OWCOLL = 0x00200000,
+ EXCCOLL = 0x00100000, COLCNT = 0x000F0000
+};
+
+enum sis900_rx_buffer_status {
+ OVERRUN = 0x02000000, DEST = 0x00800000, BCAST = 0x01800000,
+ MCAST = 0x01000000, UNIMATCH = 0x00800000, TOOLONG = 0x00400000,
+ RUNT = 0x00200000, RXISERR = 0x00100000, CRCERR = 0x00080000,
+ FAERR = 0x00040000, LOOPBK = 0x00020000, RXCOL = 0x00010000
+};
+
+/* MII register offsets */
+enum mii_registers {
+ MII_CONTROL = 0x0000, MII_STATUS = 0x0001, MII_PHY_ID0 = 0x0002,
+ MII_PHY_ID1 = 0x0003, MII_ANADV = 0x0004, MII_ANLPAR = 0x0005,
+ MII_ANEXT = 0x0006
+};
+
+/* mii registers specific to SiS 900 */
+enum sis_mii_registers {
+ MII_CONFIG1 = 0x0010, MII_CONFIG2 = 0x0011, MII_STSOUT = 0x0012,
+ MII_MASK = 0x0013, MII_RESV = 0x0014
+};
+
+/* mii registers specific to ICS 1893 */
+enum ics_mii_registers {
+ MII_EXTCTRL = 0x0010, MII_QPDSTS = 0x0011, MII_10BTOP = 0x0012,
+ MII_EXTCTRL2 = 0x0013
+};
+
+/* mii registers specific to AMD 79C901 */
+enum amd_mii_registers {
+ MII_STATUS_SUMMARY = 0x0018
+};
+
+/* MII Control register bit definitions. */
+enum mii_control_register_bits {
+ MII_CNTL_FDX = 0x0100, MII_CNTL_RST_AUTO = 0x0200,
+ MII_CNTL_ISOLATE = 0x0400, MII_CNTL_PWRDWN = 0x0800,
+ MII_CNTL_AUTO = 0x1000, MII_CNTL_SPEED = 0x2000,
+ MII_CNTL_LPBK = 0x4000, MII_CNTL_RESET = 0x8000
+};
+
+/* MII Status register bit */
+enum mii_status_register_bits {
+ MII_STAT_EXT = 0x0001, MII_STAT_JAB = 0x0002,
+ MII_STAT_LINK = 0x0004, MII_STAT_CAN_AUTO = 0x0008,
+ MII_STAT_FAULT = 0x0010, MII_STAT_AUTO_DONE = 0x0020,
+ MII_STAT_CAN_T = 0x0800, MII_STAT_CAN_T_FDX = 0x1000,
+ MII_STAT_CAN_TX = 0x2000, MII_STAT_CAN_TX_FDX = 0x4000,
+ MII_STAT_CAN_T4 = 0x8000
+};
+
+#define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */
+#define MII_ID1_MODEL 0x03F0 /* model number */
+#define MII_ID1_REV 0x000F /* model number */
+
+/* MII NWAY Register Bits ...
+ valid for the ANAR (Auto-Negotiation Advertisement) and
+ ANLPAR (Auto-Negotiation Link Partner) registers */
+enum mii_nway_register_bits {
+ MII_NWAY_NODE_SEL = 0x001f, MII_NWAY_CSMA_CD = 0x0001,
+ MII_NWAY_T = 0x0020, MII_NWAY_T_FDX = 0x0040,
+ MII_NWAY_TX = 0x0080, MII_NWAY_TX_FDX = 0x0100,
+ MII_NWAY_T4 = 0x0200, MII_NWAY_PAUSE = 0x0400,
+ MII_NWAY_RF = 0x2000, MII_NWAY_ACK = 0x4000,
+ MII_NWAY_NP = 0x8000
+};
+
+enum mii_stsout_register_bits {
+ MII_STSOUT_LINK_FAIL = 0x4000,
+ MII_STSOUT_SPD = 0x0080, MII_STSOUT_DPLX = 0x0040
+};
+
+enum mii_stsics_register_bits {
+ MII_STSICS_SPD = 0x8000, MII_STSICS_DPLX = 0x4000,
+ MII_STSICS_LINKSTS = 0x0001
+};
+
+enum mii_stssum_register_bits {
+ MII_STSSUM_LINK = 0x0008, MII_STSSUM_DPLX = 0x0004,
+ MII_STSSUM_AUTO = 0x0002, MII_STSSUM_SPD = 0x0001
+};
+
+enum sis900_revision_id {
+ SIS630A_900_REV = 0x80, SIS630E_900_REV = 0x81,
+ SIS630S_900_REV = 0x82, SIS630EA1_900_REV = 0x83,
+ SIS630ET_900_REV = 0x84, SIS635A_900_REV = 0x90,
+ SIS96x_900_REV = 0X91, SIS900B_900_REV = 0x03
+};
+
+enum sis630_revision_id {
+ SIS630A0 = 0x00, SIS630A1 = 0x01,
+ SIS630B0 = 0x10, SIS630B1 = 0x11
+};
+
+#define FDX_CAPABLE_DUPLEX_UNKNOWN 0
+#define FDX_CAPABLE_HALF_SELECTED 1
+#define FDX_CAPABLE_FULL_SELECTED 2
+
+#define HW_SPEED_UNCONFIG 0
+#define HW_SPEED_HOME 1
+#define HW_SPEED_10_MBPS 10
+#define HW_SPEED_100_MBPS 100
+#define HW_SPEED_DEFAULT (HW_SPEED_100_MBPS)
+
+#define CRC_SIZE 4
+#define MAC_HEADER_SIZE 14
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define MAX_FRAME_SIZE (1518 + 4)
+#else
+#define MAX_FRAME_SIZE 1518
+#endif /* CONFIG_VLAN_802_1Q */
+
+#define TX_BUF_SIZE (MAX_FRAME_SIZE+18)
+#define RX_BUF_SIZE (MAX_FRAME_SIZE+18)
+
+#define NUM_TX_DESC 16 /* Number of Tx descriptor registers. */
+#define NUM_RX_DESC 16 /* Number of Rx descriptor registers. */
+#define TX_TOTAL_SIZE NUM_TX_DESC*sizeof(BufferDesc)
+#define RX_TOTAL_SIZE NUM_RX_DESC*sizeof(BufferDesc)
+
+/* PCI stuff, should be move to pci.h */
+#define SIS630_VENDOR_ID 0x1039
+#define SIS630_DEVICE_ID 0x0630