diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
commit | 57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch) | |
tree | 5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c |
Initial import
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c')
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c new file mode 100644 index 000000000..0e8937c11 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -0,0 +1,221 @@ +/******************************************************************************* + This is the driver for the GMAC on-chip Ethernet controller for ST SoCs. + DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for + developing this code. + + This contains the functions to handle the dma. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <asm/io.h> +#include "dwmac1000.h" +#include "dwmac_dma.h" + +static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb, + int burst_len, u32 dma_tx, u32 dma_rx, int atds) +{ + u32 value = readl(ioaddr + DMA_BUS_MODE); + int limit; + + /* DMA SW reset */ + value |= DMA_BUS_MODE_SFT_RESET; + writel(value, ioaddr + DMA_BUS_MODE); + limit = 10; + while (limit--) { + if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)) + break; + mdelay(10); + } + if (limit < 0) + return -EBUSY; + + /* + * Set the DMA PBL (Programmable Burst Length) mode + * Before stmmac core 3.50 this mode bit was 4xPBL, and + * post 3.5 mode bit acts as 8*PBL. + * For core rev < 3.5, when the core is set for 4xPBL mode, the + * DMA transfers the data in 4, 8, 16, 32, 64 & 128 beats + * depending on pbl value. + * For core rev > 3.5, when the core is set for 8xPBL mode, the + * DMA transfers the data in 8, 16, 32, 64, 128 & 256 beats + * depending on pbl value. + */ + value = DMA_BUS_MODE_PBL | ((pbl << DMA_BUS_MODE_PBL_SHIFT) | + (pbl << DMA_BUS_MODE_RPBL_SHIFT)); + + /* Set the Fixed burst mode */ + if (fb) + value |= DMA_BUS_MODE_FB; + + /* Mixed Burst has no effect when fb is set */ + if (mb) + value |= DMA_BUS_MODE_MB; + + if (atds) + value |= DMA_BUS_MODE_ATDS; + + writel(value, ioaddr + DMA_BUS_MODE); + + /* In case of GMAC AXI configuration, program the DMA_AXI_BUS_MODE + * for supported bursts. + * + * Note: This is applicable only for revision GMACv3.61a. For + * older version this register is reserved and shall have no + * effect. + * + * Note: + * For Fixed Burst Mode: if we directly write 0xFF to this + * register using the configurations pass from platform code, + * this would ensure that all bursts supported by core are set + * and those which are not supported would remain ineffective. + * + * For Non Fixed Burst Mode: provide the maximum value of the + * burst length. Any burst equal or below the provided burst + * length would be allowed to perform. + */ + writel(burst_len, ioaddr + DMA_AXI_BUS_MODE); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); + + /* RX/TX descriptor base address lists must be written into + * DMA CSR3 and CSR4, respectively + */ + writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); + writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); + + return 0; +} + +static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz) +{ + csr6 &= ~DMA_CONTROL_RFA_MASK; + csr6 &= ~DMA_CONTROL_RFD_MASK; + + /* Leave flow control disabled if receive fifo size is less than + * 4K or 0. Otherwise, send XOFF when fifo is 1K less than full, + * and send XON when 2K less than full. + */ + if (rxfifosz < 4096) { + csr6 &= ~DMA_CONTROL_EFC; + pr_debug("GMAC: disabling flow control, rxfifo too small(%d)\n", + rxfifosz); + } else { + csr6 |= DMA_CONTROL_EFC; + csr6 |= RFA_FULL_MINUS_1K; + csr6 |= RFD_FULL_MINUS_2K; + } + return csr6; +} + +static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode, + int rxmode, int rxfifosz) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + + if (txmode == SF_DMA_MODE) { + pr_debug("GMAC: enable TX store and forward mode\n"); + /* Transmit COE type 2 cannot be done in cut-through mode. */ + csr6 |= DMA_CONTROL_TSF; + /* Operating on second frame increase the performance + * especially when transmit store-and-forward is used. + */ + csr6 |= DMA_CONTROL_OSF; + } else { + pr_debug("GMAC: disabling TX SF (threshold %d)\n", txmode); + csr6 &= ~DMA_CONTROL_TSF; + csr6 &= DMA_CONTROL_TC_TX_MASK; + /* Set the transmit threshold */ + if (txmode <= 32) + csr6 |= DMA_CONTROL_TTC_32; + else if (txmode <= 64) + csr6 |= DMA_CONTROL_TTC_64; + else if (txmode <= 128) + csr6 |= DMA_CONTROL_TTC_128; + else if (txmode <= 192) + csr6 |= DMA_CONTROL_TTC_192; + else + csr6 |= DMA_CONTROL_TTC_256; + } + + if (rxmode == SF_DMA_MODE) { + pr_debug("GMAC: enable RX store and forward mode\n"); + csr6 |= DMA_CONTROL_RSF; + } else { + pr_debug("GMAC: disable RX SF mode (threshold %d)\n", rxmode); + csr6 &= ~DMA_CONTROL_RSF; + csr6 &= DMA_CONTROL_TC_RX_MASK; + if (rxmode <= 32) + csr6 |= DMA_CONTROL_RTC_32; + else if (rxmode <= 64) + csr6 |= DMA_CONTROL_RTC_64; + else if (rxmode <= 96) + csr6 |= DMA_CONTROL_RTC_96; + else + csr6 |= DMA_CONTROL_RTC_128; + } + + /* Configure flow control based on rx fifo size */ + csr6 = dwmac1000_configure_fc(csr6, rxfifosz); + + writel(csr6, ioaddr + DMA_CONTROL); +} + +static void dwmac1000_dump_dma_regs(void __iomem *ioaddr) +{ + int i; + pr_info(" DMA registers\n"); + for (i = 0; i < 22; i++) { + if ((i < 9) || (i > 17)) { + int offset = i * 4; + pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i, + (DMA_BUS_MODE + offset), + readl(ioaddr + DMA_BUS_MODE + offset)); + } + } +} + +static unsigned int dwmac1000_get_hw_feature(void __iomem *ioaddr) +{ + return readl(ioaddr + DMA_HW_FEATURE); +} + +static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt) +{ + writel(riwt, ioaddr + DMA_RX_WATCHDOG); +} + +const struct stmmac_dma_ops dwmac1000_dma_ops = { + .init = dwmac1000_dma_init, + .dump_regs = dwmac1000_dump_dma_regs, + .dma_mode = dwmac1000_dma_operation_mode, + .enable_dma_transmission = dwmac_enable_dma_transmission, + .enable_dma_irq = dwmac_enable_dma_irq, + .disable_dma_irq = dwmac_disable_dma_irq, + .start_tx = dwmac_dma_start_tx, + .stop_tx = dwmac_dma_stop_tx, + .start_rx = dwmac_dma_start_rx, + .stop_rx = dwmac_dma_stop_rx, + .dma_interrupt = dwmac_dma_interrupt, + .get_hw_feature = dwmac1000_get_hw_feature, + .rx_watchdog = dwmac1000_rx_watchdog, +}; |