Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 997 insertions, 428 deletions

diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index 997724b8e..4cdf51638 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -18,51 +18,172 @@
 #include <linux/spi/spi.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/regmap.h>
 #include <linux/ieee802154.h>
+#include <linux/irq.h>
 #include <net/cfg802154.h>
 #include <net/mac802154.h>
 
 /* MRF24J40 Short Address Registers */
-#define REG_RXMCR    0x00  /* Receive MAC control */
-#define REG_PANIDL   0x01  /* PAN ID (low) */
-#define REG_PANIDH   0x02  /* PAN ID (high) */
-#define REG_SADRL    0x03  /* Short address (low) */
-#define REG_SADRH    0x04  /* Short address (high) */
-#define REG_EADR0    0x05  /* Long address (low) (high is EADR7) */
-#define REG_TXMCR    0x11  /* Transmit MAC control */
-#define REG_PACON0   0x16  /* Power Amplifier Control */
-#define REG_PACON1   0x17  /* Power Amplifier Control */
-#define REG_PACON2   0x18  /* Power Amplifier Control */
-#define REG_TXNCON   0x1B  /* Transmit Normal FIFO Control */
-#define REG_TXSTAT   0x24  /* TX MAC Status Register */
-#define REG_SOFTRST  0x2A  /* Soft Reset */
-#define REG_TXSTBL   0x2E  /* TX Stabilization */
-#define REG_INTSTAT  0x31  /* Interrupt Status */
-#define REG_INTCON   0x32  /* Interrupt Control */
-#define REG_GPIO     0x33  /* GPIO */
-#define REG_TRISGPIO 0x34  /* GPIO direction */
-#define REG_RFCTL    0x36  /* RF Control Mode Register */
-#define REG_BBREG1   0x39  /* Baseband Registers */
-#define REG_BBREG2   0x3A  /* */
-#define REG_BBREG6   0x3E  /* */
-#define REG_CCAEDTH  0x3F  /* Energy Detection Threshold */
+#define REG_RXMCR	0x00  /* Receive MAC control */
+#define BIT_PROMI	BIT(0)
+#define BIT_ERRPKT	BIT(1)
+#define BIT_NOACKRSP	BIT(5)
+#define BIT_PANCOORD	BIT(3)
+
+#define REG_PANIDL	0x01  /* PAN ID (low) */
+#define REG_PANIDH	0x02  /* PAN ID (high) */
+#define REG_SADRL	0x03  /* Short address (low) */
+#define REG_SADRH	0x04  /* Short address (high) */
+#define REG_EADR0	0x05  /* Long address (low) (high is EADR7) */
+#define REG_EADR1	0x06
+#define REG_EADR2	0x07
+#define REG_EADR3	0x08
+#define REG_EADR4	0x09
+#define REG_EADR5	0x0A
+#define REG_EADR6	0x0B
+#define REG_EADR7	0x0C
+#define REG_RXFLUSH	0x0D
+#define REG_ORDER	0x10
+#define REG_TXMCR	0x11  /* Transmit MAC control */
+#define TXMCR_MIN_BE_SHIFT		3
+#define TXMCR_MIN_BE_MASK		0x18
+#define TXMCR_CSMA_RETRIES_SHIFT	0
+#define TXMCR_CSMA_RETRIES_MASK		0x07
+
+#define REG_ACKTMOUT	0x12
+#define REG_ESLOTG1	0x13
+#define REG_SYMTICKL	0x14
+#define REG_SYMTICKH	0x15
+#define REG_PACON0	0x16  /* Power Amplifier Control */
+#define REG_PACON1	0x17  /* Power Amplifier Control */
+#define REG_PACON2	0x18  /* Power Amplifier Control */
+#define REG_TXBCON0	0x1A
+#define REG_TXNCON	0x1B  /* Transmit Normal FIFO Control */
+#define BIT_TXNTRIG	BIT(0)
+#define BIT_TXNACKREQ	BIT(2)
+
+#define REG_TXG1CON	0x1C
+#define REG_TXG2CON	0x1D
+#define REG_ESLOTG23	0x1E
+#define REG_ESLOTG45	0x1F
+#define REG_ESLOTG67	0x20
+#define REG_TXPEND	0x21
+#define REG_WAKECON	0x22
+#define REG_FROMOFFSET	0x23
+#define REG_TXSTAT	0x24  /* TX MAC Status Register */
+#define REG_TXBCON1	0x25
+#define REG_GATECLK	0x26
+#define REG_TXTIME	0x27
+#define REG_HSYMTMRL	0x28
+#define REG_HSYMTMRH	0x29
+#define REG_SOFTRST	0x2A  /* Soft Reset */
+#define REG_SECCON0	0x2C
+#define REG_SECCON1	0x2D
+#define REG_TXSTBL	0x2E  /* TX Stabilization */
+#define REG_RXSR	0x30
+#define REG_INTSTAT	0x31  /* Interrupt Status */
+#define BIT_TXNIF	BIT(0)
+#define BIT_RXIF	BIT(3)
+
+#define REG_INTCON	0x32  /* Interrupt Control */
+#define BIT_TXNIE	BIT(0)
+#define BIT_RXIE	BIT(3)
+
+#define REG_GPIO	0x33  /* GPIO */
+#define REG_TRISGPIO	0x34  /* GPIO direction */
+#define REG_SLPACK	0x35
+#define REG_RFCTL	0x36  /* RF Control Mode Register */
+#define BIT_RFRST	BIT(2)
+
+#define REG_SECCR2	0x37
+#define REG_BBREG0	0x38
+#define REG_BBREG1	0x39  /* Baseband Registers */
+#define BIT_RXDECINV	BIT(2)
+
+#define REG_BBREG2	0x3A  /* */
+#define BBREG2_CCA_MODE_SHIFT	6
+#define BBREG2_CCA_MODE_MASK	0xc0
+
+#define REG_BBREG3	0x3B
+#define REG_BBREG4	0x3C
+#define REG_BBREG6	0x3E  /* */
+#define REG_CCAEDTH	0x3F  /* Energy Detection Threshold */
 
 /* MRF24J40 Long Address Registers */
-#define REG_RFCON0     0x200  /* RF Control Registers */
-#define REG_RFCON1     0x201
-#define REG_RFCON2     0x202
-#define REG_RFCON3     0x203
-#define REG_RFCON5     0x205
-#define REG_RFCON6     0x206
-#define REG_RFCON7     0x207
-#define REG_RFCON8     0x208
-#define REG_RSSI       0x210
-#define REG_SLPCON0    0x211  /* Sleep Clock Control Registers */
-#define REG_SLPCON1    0x220
-#define REG_WAKETIMEL  0x222  /* Wake-up Time Match Value Low */
-#define REG_WAKETIMEH  0x223  /* Wake-up Time Match Value High */
-#define REG_TESTMODE   0x22F  /* Test mode */
-#define REG_RX_FIFO    0x300  /* Receive FIFO */
+#define REG_RFCON0	0x200  /* RF Control Registers */
+#define RFCON0_CH_SHIFT	4
+#define RFCON0_CH_MASK	0xf0
+#define RFOPT_RECOMMEND	3
+
+#define REG_RFCON1	0x201
+#define REG_RFCON2	0x202
+#define REG_RFCON3	0x203
+
+#define TXPWRL_MASK	0xc0
+#define TXPWRL_SHIFT	6
+#define TXPWRL_30	0x3
+#define TXPWRL_20	0x2
+#define TXPWRL_10	0x1
+#define TXPWRL_0	0x0
+
+#define TXPWRS_MASK	0x38
+#define TXPWRS_SHIFT	3
+#define TXPWRS_6_3	0x7
+#define TXPWRS_4_9	0x6
+#define TXPWRS_3_7	0x5
+#define TXPWRS_2_8	0x4
+#define TXPWRS_1_9	0x3
+#define TXPWRS_1_2	0x2
+#define TXPWRS_0_5	0x1
+#define TXPWRS_0	0x0
+
+#define REG_RFCON5	0x205
+#define REG_RFCON6	0x206
+#define REG_RFCON7	0x207
+#define REG_RFCON8	0x208
+#define REG_SLPCAL0	0x209
+#define REG_SLPCAL1	0x20A
+#define REG_SLPCAL2	0x20B
+#define REG_RFSTATE	0x20F
+#define REG_RSSI	0x210
+#define REG_SLPCON0	0x211  /* Sleep Clock Control Registers */
+#define BIT_INTEDGE	BIT(1)
+
+#define REG_SLPCON1	0x220
+#define REG_WAKETIMEL	0x222  /* Wake-up Time Match Value Low */
+#define REG_WAKETIMEH	0x223  /* Wake-up Time Match Value High */
+#define REG_REMCNTL	0x224
+#define REG_REMCNTH	0x225
+#define REG_MAINCNT0	0x226
+#define REG_MAINCNT1	0x227
+#define REG_MAINCNT2	0x228
+#define REG_MAINCNT3	0x229
+#define REG_TESTMODE	0x22F  /* Test mode */
+#define REG_ASSOEAR0	0x230
+#define REG_ASSOEAR1	0x231
+#define REG_ASSOEAR2	0x232
+#define REG_ASSOEAR3	0x233
+#define REG_ASSOEAR4	0x234
+#define REG_ASSOEAR5	0x235
+#define REG_ASSOEAR6	0x236
+#define REG_ASSOEAR7	0x237
+#define REG_ASSOSAR0	0x238
+#define REG_ASSOSAR1	0x239
+#define REG_UNONCE0	0x240
+#define REG_UNONCE1	0x241
+#define REG_UNONCE2	0x242
+#define REG_UNONCE3	0x243
+#define REG_UNONCE4	0x244
+#define REG_UNONCE5	0x245
+#define REG_UNONCE6	0x246
+#define REG_UNONCE7	0x247
+#define REG_UNONCE8	0x248
+#define REG_UNONCE9	0x249
+#define REG_UNONCE10	0x24A
+#define REG_UNONCE11	0x24B
+#define REG_UNONCE12	0x24C
+#define REG_RX_FIFO	0x300  /* Receive FIFO */
 
 /* Device configuration: Only channels 11-26 on page 0 are supported. */
 #define MRF24J40_CHAN_MIN 11
@@ -81,11 +202,52 @@ struct mrf24j40 {
 	struct spi_device *spi;
 	struct ieee802154_hw *hw;
 
-	struct mutex buffer_mutex; /* only used to protect buf */
-	struct completion tx_complete;
-	u8 *buf; /* 3 bytes. Used for SPI single-register transfers. */
+	struct regmap *regmap_short;
+	struct regmap *regmap_long;
+
+	/* for writing txfifo */
+	struct spi_message tx_msg;
+	u8 tx_hdr_buf[2];
+	struct spi_transfer tx_hdr_trx;
+	u8 tx_len_buf[2];
+	struct spi_transfer tx_len_trx;
+	struct spi_transfer tx_buf_trx;
+	struct sk_buff *tx_skb;
+
+	/* post transmit message to send frame out  */
+	struct spi_message tx_post_msg;
+	u8 tx_post_buf[2];
+	struct spi_transfer tx_post_trx;
+
+	/* for protect/unprotect/read length rxfifo */
+	struct spi_message rx_msg;
+	u8 rx_buf[3];
+	struct spi_transfer rx_trx;
+
+	/* receive handling */
+	struct spi_message rx_buf_msg;
+	u8 rx_addr_buf[2];
+	struct spi_transfer rx_addr_trx;
+	u8 rx_lqi_buf[2];
+	struct spi_transfer rx_lqi_trx;
+	u8 rx_fifo_buf[RX_FIFO_SIZE];
+	struct spi_transfer rx_fifo_buf_trx;
+
+	/* isr handling for reading intstat */
+	struct spi_message irq_msg;
+	u8 irq_buf[2];
+	struct spi_transfer irq_trx;
 };
 
+/* regmap information for short address register access */
+#define MRF24J40_SHORT_WRITE	0x01
+#define MRF24J40_SHORT_READ	0x00
+#define MRF24J40_SHORT_NUMREGS	0x3F
+
+/* regmap information for long address register access */
+#define MRF24J40_LONG_ACCESS	0x80
+#define MRF24J40_LONG_NUMREGS	0x38F
+
 /* Read/Write SPI Commands for Short and Long Address registers. */
 #define MRF24J40_READSHORT(reg) ((reg) << 1)
 #define MRF24J40_WRITESHORT(reg) ((reg) << 1 | 1)
@@ -97,118 +259,304 @@ struct mrf24j40 {
 
 #define printdev(X) (&X->spi->dev)
 
-static int write_short_reg(struct mrf24j40 *devrec, u8 reg, u8 value)
+static bool
+mrf24j40_short_reg_writeable(struct device *dev, unsigned int reg)
 {
-	int ret;
-	struct spi_message msg;
-	struct spi_transfer xfer = {
-		.len = 2,
-		.tx_buf = devrec->buf,
-		.rx_buf = devrec->buf,
-	};
+	switch (reg) {
+	case REG_RXMCR:
+	case REG_PANIDL:
+	case REG_PANIDH:
+	case REG_SADRL:
+	case REG_SADRH:
+	case REG_EADR0:
+	case REG_EADR1:
+	case REG_EADR2:
+	case REG_EADR3:
+	case REG_EADR4:
+	case REG_EADR5:
+	case REG_EADR6:
+	case REG_EADR7:
+	case REG_RXFLUSH:
+	case REG_ORDER:
+	case REG_TXMCR:
+	case REG_ACKTMOUT:
+	case REG_ESLOTG1:
+	case REG_SYMTICKL:
+	case REG_SYMTICKH:
+	case REG_PACON0:
+	case REG_PACON1:
+	case REG_PACON2:
+	case REG_TXBCON0:
+	case REG_TXNCON:
+	case REG_TXG1CON:
+	case REG_TXG2CON:
+	case REG_ESLOTG23:
+	case REG_ESLOTG45:
+	case REG_ESLOTG67:
+	case REG_TXPEND:
+	case REG_WAKECON:
+	case REG_FROMOFFSET:
+	case REG_TXBCON1:
+	case REG_GATECLK:
+	case REG_TXTIME:
+	case REG_HSYMTMRL:
+	case REG_HSYMTMRH:
+	case REG_SOFTRST:
+	case REG_SECCON0:
+	case REG_SECCON1:
+	case REG_TXSTBL:
+	case REG_RXSR:
+	case REG_INTCON:
+	case REG_TRISGPIO:
+	case REG_GPIO:
+	case REG_RFCTL:
+	case REG_SLPACK:
+	case REG_BBREG0:
+	case REG_BBREG1:
+	case REG_BBREG2:
+	case REG_BBREG3:
+	case REG_BBREG4:
+	case REG_BBREG6:
+	case REG_CCAEDTH:
+		return true;
+	default:
+		return false;
+	}
+}
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
+static bool
+mrf24j40_short_reg_readable(struct device *dev, unsigned int reg)
+{
+	bool rc;
+
+	/* all writeable are also readable */
+	rc = mrf24j40_short_reg_writeable(dev, reg);
+	if (rc)
+		return rc;
+
+	/* readonly regs */
+	switch (reg) {
+	case REG_TXSTAT:
+	case REG_INTSTAT:
+		return true;
+	default:
+		return false;
+	}
+}
 
-	mutex_lock(&devrec->buffer_mutex);
-	devrec->buf[0] = MRF24J40_WRITESHORT(reg);
-	devrec->buf[1] = value;
+static bool
+mrf24j40_short_reg_volatile(struct device *dev, unsigned int reg)
+{
+	/* can be changed during runtime */
+	switch (reg) {
+	case REG_TXSTAT:
+	case REG_INTSTAT:
+	case REG_RXFLUSH:
+	case REG_TXNCON:
+	case REG_SOFTRST:
+	case REG_RFCTL:
+	case REG_TXBCON0:
+	case REG_TXG1CON:
+	case REG_TXG2CON:
+	case REG_TXBCON1:
+	case REG_SECCON0:
+	case REG_RXSR:
+	case REG_SLPACK:
+	case REG_SECCR2:
+	case REG_BBREG6:
+	/* use them in spi_async and regmap so it's volatile */
+	case REG_BBREG1:
+		return true;
+	default:
+		return false;
+	}
+}
 
-	ret = spi_sync(devrec->spi, &msg);
-	if (ret)
-		dev_err(printdev(devrec),
-			"SPI write Failed for short register 0x%hhx\n", reg);
+static bool
+mrf24j40_short_reg_precious(struct device *dev, unsigned int reg)
+{
+	/* don't clear irq line on read */
+	switch (reg) {
+	case REG_INTSTAT:
+		return true;
+	default:
+		return false;
+	}
+}
 
-	mutex_unlock(&devrec->buffer_mutex);
-	return ret;
+static const struct regmap_config mrf24j40_short_regmap = {
+	.name = "mrf24j40_short",
+	.reg_bits = 7,
+	.val_bits = 8,
+	.pad_bits = 1,
+	.write_flag_mask = MRF24J40_SHORT_WRITE,
+	.read_flag_mask = MRF24J40_SHORT_READ,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = MRF24J40_SHORT_NUMREGS,
+	.writeable_reg = mrf24j40_short_reg_writeable,
+	.readable_reg = mrf24j40_short_reg_readable,
+	.volatile_reg = mrf24j40_short_reg_volatile,
+	.precious_reg = mrf24j40_short_reg_precious,
+};
+
+static bool
+mrf24j40_long_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case REG_RFCON0:
+	case REG_RFCON1:
+	case REG_RFCON2:
+	case REG_RFCON3:
+	case REG_RFCON5:
+	case REG_RFCON6:
+	case REG_RFCON7:
+	case REG_RFCON8:
+	case REG_SLPCAL2:
+	case REG_SLPCON0:
+	case REG_SLPCON1:
+	case REG_WAKETIMEL:
+	case REG_WAKETIMEH:
+	case REG_REMCNTL:
+	case REG_REMCNTH:
+	case REG_MAINCNT0:
+	case REG_MAINCNT1:
+	case REG_MAINCNT2:
+	case REG_MAINCNT3:
+	case REG_TESTMODE:
+	case REG_ASSOEAR0:
+	case REG_ASSOEAR1:
+	case REG_ASSOEAR2:
+	case REG_ASSOEAR3:
+	case REG_ASSOEAR4:
+	case REG_ASSOEAR5:
+	case REG_ASSOEAR6:
+	case REG_ASSOEAR7:
+	case REG_ASSOSAR0:
+	case REG_ASSOSAR1:
+	case REG_UNONCE0:
+	case REG_UNONCE1:
+	case REG_UNONCE2:
+	case REG_UNONCE3:
+	case REG_UNONCE4:
+	case REG_UNONCE5:
+	case REG_UNONCE6:
+	case REG_UNONCE7:
+	case REG_UNONCE8:
+	case REG_UNONCE9:
+	case REG_UNONCE10:
+	case REG_UNONCE11:
+	case REG_UNONCE12:
+		return true;
+	default:
+		return false;
+	}
 }
 
-static int read_short_reg(struct mrf24j40 *devrec, u8 reg, u8 *val)
+static bool
+mrf24j40_long_reg_readable(struct device *dev, unsigned int reg)
 {
-	int ret = -1;
-	struct spi_message msg;
-	struct spi_transfer xfer = {
-		.len = 2,
-		.tx_buf = devrec->buf,
-		.rx_buf = devrec->buf,
-	};
+	bool rc;
+
+	/* all writeable are also readable */
+	rc = mrf24j40_long_reg_writeable(dev, reg);
+	if (rc)
+		return rc;
+
+	/* readonly regs */
+	switch (reg) {
+	case REG_SLPCAL0:
+	case REG_SLPCAL1:
+	case REG_RFSTATE:
+	case REG_RSSI:
+		return true;
+	default:
+		return false;
+	}
+}
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
+static bool
+mrf24j40_long_reg_volatile(struct device *dev, unsigned int reg)
+{
+	/* can be changed during runtime */
+	switch (reg) {
+	case REG_SLPCAL0:
+	case REG_SLPCAL1:
+	case REG_SLPCAL2:
+	case REG_RFSTATE:
+	case REG_RSSI:
+	case REG_MAINCNT3:
+		return true;
+	default:
+		return false;
+	}
+}
 
-	mutex_lock(&devrec->buffer_mutex);
-	devrec->buf[0] = MRF24J40_READSHORT(reg);
-	devrec->buf[1] = 0;
+static const struct regmap_config mrf24j40_long_regmap = {
+	.name = "mrf24j40_long",
+	.reg_bits = 11,
+	.val_bits = 8,
+	.pad_bits = 5,
+	.write_flag_mask = MRF24J40_LONG_ACCESS,
+	.read_flag_mask = MRF24J40_LONG_ACCESS,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = MRF24J40_LONG_NUMREGS,
+	.writeable_reg = mrf24j40_long_reg_writeable,
+	.readable_reg = mrf24j40_long_reg_readable,
+	.volatile_reg = mrf24j40_long_reg_volatile,
+};
 
-	ret = spi_sync(devrec->spi, &msg);
-	if (ret)
-		dev_err(printdev(devrec),
-			"SPI read Failed for short register 0x%hhx\n", reg);
-	else
-		*val = devrec->buf[1];
+static int mrf24j40_long_regmap_write(void *context, const void *data,
+				      size_t count)
+{
+	struct spi_device *spi = context;
+	u8 buf[3];
 
-	mutex_unlock(&devrec->buffer_mutex);
-	return ret;
+	if (count > 3)
+		return -EINVAL;
+
+	/* regmap supports read/write mask only in frist byte
+	 * long write access need to set the 12th bit, so we
+	 * make special handling for write.
+	 */
+	memcpy(buf, data, count);
+	buf[1] |= (1 << 4);
+
+	return spi_write(spi, buf, count);
 }
 
-static int read_long_reg(struct mrf24j40 *devrec, u16 reg, u8 *value)
+static int
+mrf24j40_long_regmap_read(void *context, const void *reg, size_t reg_size,
+			  void *val, size_t val_size)
 {
-	int ret;
-	u16 cmd;
-	struct spi_message msg;
-	struct spi_transfer xfer = {
-		.len = 3,
-		.tx_buf = devrec->buf,
-		.rx_buf = devrec->buf,
-	};
-
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-
-	cmd = MRF24J40_READLONG(reg);
-	mutex_lock(&devrec->buffer_mutex);
-	devrec->buf[0] = cmd >> 8 & 0xff;
-	devrec->buf[1] = cmd & 0xff;
-	devrec->buf[2] = 0;
-
-	ret = spi_sync(devrec->spi, &msg);
-	if (ret)
-		dev_err(printdev(devrec),
-			"SPI read Failed for long register 0x%hx\n", reg);
-	else
-		*value = devrec->buf[2];
+	struct spi_device *spi = context;
 
-	mutex_unlock(&devrec->buffer_mutex);
-	return ret;
+	return spi_write_then_read(spi, reg, reg_size, val, val_size);
 }
 
-static int write_long_reg(struct mrf24j40 *devrec, u16 reg, u8 val)
+static const struct regmap_bus mrf24j40_long_regmap_bus = {
+	.write = mrf24j40_long_regmap_write,
+	.read = mrf24j40_long_regmap_read,
+	.reg_format_endian_default = REGMAP_ENDIAN_BIG,
+	.val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static void write_tx_buf_complete(void *context)
 {
+	struct mrf24j40 *devrec = context;
+	__le16 fc = ieee802154_get_fc_from_skb(devrec->tx_skb);
+	u8 val = BIT_TXNTRIG;
 	int ret;
-	u16 cmd;
-	struct spi_message msg;
-	struct spi_transfer xfer = {
-		.len = 3,
-		.tx_buf = devrec->buf,
-		.rx_buf = devrec->buf,
-	};
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
+	if (ieee802154_is_ackreq(fc))
+		val |= BIT_TXNACKREQ;
 
-	cmd = MRF24J40_WRITELONG(reg);
-	mutex_lock(&devrec->buffer_mutex);
-	devrec->buf[0] = cmd >> 8 & 0xff;
-	devrec->buf[1] = cmd & 0xff;
-	devrec->buf[2] = val;
+	devrec->tx_post_msg.complete = NULL;
+	devrec->tx_post_buf[0] = MRF24J40_WRITESHORT(REG_TXNCON);
+	devrec->tx_post_buf[1] = val;
 
-	ret = spi_sync(devrec->spi, &msg);
+	ret = spi_async(devrec->spi, &devrec->tx_post_msg);
 	if (ret)
-		dev_err(printdev(devrec),
-			"SPI write Failed for long register 0x%hx\n", reg);
-
-	mutex_unlock(&devrec->buffer_mutex);
-	return ret;
+		dev_err(printdev(devrec), "SPI write Failed for transmit buf\n");
 }
 
 /* This function relies on an undocumented write method. Once a write command
@@ -217,22 +565,8 @@ static int write_long_reg(struct mrf24j40 *devrec, u16 reg, u8 val)
 static int write_tx_buf(struct mrf24j40 *devrec, u16 reg,
 			const u8 *data, size_t length)
 {
-	int ret;
 	u16 cmd;
-	u8 lengths[2];
-	struct spi_message msg;
-	struct spi_transfer addr_xfer = {
-		.len = 2,
-		.tx_buf = devrec->buf,
-	};
-	struct spi_transfer lengths_xfer = {
-		.len = 2,
-		.tx_buf = &lengths, /* TODO: Is DMA really required for SPI? */
-	};
-	struct spi_transfer data_xfer = {
-		.len = length,
-		.tx_buf = data,
-	};
+	int ret;
 
 	/* Range check the length. 2 bytes are used for the length fields.*/
 	if (length > TX_FIFO_SIZE-2) {
@@ -240,147 +574,29 @@ static int write_tx_buf(struct mrf24j40 *devrec, u16 reg,
 		length = TX_FIFO_SIZE-2;
 	}
 
-	spi_message_init(&msg);
-	spi_message_add_tail(&addr_xfer, &msg);
-	spi_message_add_tail(&lengths_xfer, &msg);
-	spi_message_add_tail(&data_xfer, &msg);
-
 	cmd = MRF24J40_WRITELONG(reg);
-	mutex_lock(&devrec->buffer_mutex);
-	devrec->buf[0] = cmd >> 8 & 0xff;
-	devrec->buf[1] = cmd & 0xff;
-	lengths[0] = 0x0; /* Header Length. Set to 0 for now. TODO */
-	lengths[1] = length; /* Total length */
-
-	ret = spi_sync(devrec->spi, &msg);
+	devrec->tx_hdr_buf[0] = cmd >> 8 & 0xff;
+	devrec->tx_hdr_buf[1] = cmd & 0xff;
+	devrec->tx_len_buf[0] = 0x0; /* Header Length. Set to 0 for now. TODO */
+	devrec->tx_len_buf[1] = length; /* Total length */
+	devrec->tx_buf_trx.tx_buf = data;
+	devrec->tx_buf_trx.len = length;
+
+	ret = spi_async(devrec->spi, &devrec->tx_msg);
 	if (ret)
 		dev_err(printdev(devrec), "SPI write Failed for TX buf\n");
 
-	mutex_unlock(&devrec->buffer_mutex);
-	return ret;
-}
-
-static int mrf24j40_read_rx_buf(struct mrf24j40 *devrec,
-				u8 *data, u8 *len, u8 *lqi)
-{
-	u8 rx_len;
-	u8 addr[2];
-	u8 lqi_rssi[2];
-	u16 cmd;
-	int ret;
-	struct spi_message msg;
-	struct spi_transfer addr_xfer = {
-		.len = 2,
-		.tx_buf = &addr,
-	};
-	struct spi_transfer data_xfer = {
-		.len = 0x0, /* set below */
-		.rx_buf = data,
-	};
-	struct spi_transfer status_xfer = {
-		.len = 2,
-		.rx_buf = &lqi_rssi,
-	};
-
-	/* Get the length of the data in the RX FIFO. The length in this
-	 * register exclues the 1-byte length field at the beginning. */
-	ret = read_long_reg(devrec, REG_RX_FIFO, &rx_len);
-	if (ret)
-		goto out;
-
-	/* Range check the RX FIFO length, accounting for the one-byte
-	 * length field at the beginning. */
-	if (rx_len > RX_FIFO_SIZE-1) {
-		dev_err(printdev(devrec), "Invalid length read from device. Performing short read.\n");
-		rx_len = RX_FIFO_SIZE-1;
-	}
-
-	if (rx_len > *len) {
-		/* Passed in buffer wasn't big enough. Should never happen. */
-		dev_err(printdev(devrec), "Buffer not big enough. Performing short read\n");
-		rx_len = *len;
-	}
-
-	/* Set up the commands to read the data. */
-	cmd = MRF24J40_READLONG(REG_RX_FIFO+1);
-	addr[0] = cmd >> 8 & 0xff;
-	addr[1] = cmd & 0xff;
-	data_xfer.len = rx_len;
-
-	spi_message_init(&msg);
-	spi_message_add_tail(&addr_xfer, &msg);
-	spi_message_add_tail(&data_xfer, &msg);
-	spi_message_add_tail(&status_xfer, &msg);
-
-	ret = spi_sync(devrec->spi, &msg);
-	if (ret) {
-		dev_err(printdev(devrec), "SPI RX Buffer Read Failed.\n");
-		goto out;
-	}
-
-	*lqi = lqi_rssi[0];
-	*len = rx_len;
-
-#ifdef DEBUG
-	print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ",
-		       DUMP_PREFIX_OFFSET, 16, 1, data, *len, 0);
-	pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n",
-		 lqi_rssi[0], lqi_rssi[1]);
-#endif
-
-out:
 	return ret;
 }
 
 static int mrf24j40_tx(struct ieee802154_hw *hw, struct sk_buff *skb)
 {
 	struct mrf24j40 *devrec = hw->priv;
-	u8 val;
-	int ret = 0;
 
 	dev_dbg(printdev(devrec), "tx packet of %d bytes\n", skb->len);
+	devrec->tx_skb = skb;
 
-	ret = write_tx_buf(devrec, 0x000, skb->data, skb->len);
-	if (ret)
-		goto err;
-
-	reinit_completion(&devrec->tx_complete);
-
-	/* Set TXNTRIG bit of TXNCON to send packet */
-	ret = read_short_reg(devrec, REG_TXNCON, &val);
-	if (ret)
-		goto err;
-	val |= 0x1;
-	/* Set TXNACKREQ if the ACK bit is set in the packet. */
-	if (skb->data[0] & IEEE802154_FC_ACK_REQ)
-		val |= 0x4;
-	write_short_reg(devrec, REG_TXNCON, val);
-
-	/* Wait for the device to send the TX complete interrupt. */
-	ret = wait_for_completion_interruptible_timeout(
-						&devrec->tx_complete,
-						5 * HZ);
-	if (ret == -ERESTARTSYS)
-		goto err;
-	if (ret == 0) {
-		dev_warn(printdev(devrec), "Timeout waiting for TX interrupt\n");
-		ret = -ETIMEDOUT;
-		goto err;
-	}
-
-	/* Check for send error from the device. */
-	ret = read_short_reg(devrec, REG_TXSTAT, &val);
-	if (ret)
-		goto err;
-	if (val & 0x1) {
-		dev_dbg(printdev(devrec), "Error Sending. Retry count exceeded\n");
-		ret = -ECOMM; /* TODO: Better error code ? */
-	} else
-		dev_dbg(printdev(devrec), "Packet Sent\n");
-
-err:
-
-	return ret;
+	return write_tx_buf(devrec, 0x000, skb->data, skb->len);
 }
 
 static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level)
@@ -394,33 +610,23 @@ static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level)
 static int mrf24j40_start(struct ieee802154_hw *hw)
 {
 	struct mrf24j40 *devrec = hw->priv;
-	u8 val;
-	int ret;
 
 	dev_dbg(printdev(devrec), "start\n");
 
-	ret = read_short_reg(devrec, REG_INTCON, &val);
-	if (ret)
-		return ret;
-	val &= ~(0x1|0x8); /* Clear TXNIE and RXIE. Enable interrupts */
-	write_short_reg(devrec, REG_INTCON, val);
-
-	return 0;
+	/* Clear TXNIE and RXIE. Enable interrupts */
+	return regmap_update_bits(devrec->regmap_short, REG_INTCON,
+				  BIT_TXNIE | BIT_RXIE, 0);
 }
 
 static void mrf24j40_stop(struct ieee802154_hw *hw)
 {
 	struct mrf24j40 *devrec = hw->priv;
-	u8 val;
-	int ret;
 
 	dev_dbg(printdev(devrec), "stop\n");
 
-	ret = read_short_reg(devrec, REG_INTCON, &val);
-	if (ret)
-		return;
-	val |= 0x1|0x8; /* Set TXNIE and RXIE. Disable Interrupts */
-	write_short_reg(devrec, REG_INTCON, val);
+	/* Set TXNIE and RXIE. Disable Interrupts */
+	regmap_update_bits(devrec->regmap_short, REG_INTCON,
+			   BIT_TXNIE | BIT_TXNIE, BIT_TXNIE | BIT_TXNIE);
 }
 
 static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
@@ -436,21 +642,23 @@ static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
 	WARN_ON(channel > MRF24J40_CHAN_MAX);
 
 	/* Set Channel TODO */
-	val = (channel-11) << 4 | 0x03;
-	write_long_reg(devrec, REG_RFCON0, val);
+	val = (channel - 11) << RFCON0_CH_SHIFT | RFOPT_RECOMMEND;
+	ret = regmap_update_bits(devrec->regmap_long, REG_RFCON0,
+				 RFCON0_CH_MASK, val);
+	if (ret)
+		return ret;
 
 	/* RF Reset */
-	ret = read_short_reg(devrec, REG_RFCTL, &val);
+	ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST,
+				 BIT_RFRST);
 	if (ret)
 		return ret;
-	val |= 0x04;
-	write_short_reg(devrec, REG_RFCTL, val);
-	val &= ~0x04;
-	write_short_reg(devrec, REG_RFCTL, val);
 
-	udelay(SET_CHANNEL_DELAY_US); /* per datasheet */
+	ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, 0);
+	if (!ret)
+		udelay(SET_CHANNEL_DELAY_US); /* per datasheet */
 
-	return 0;
+	return ret;
 }
 
 static int mrf24j40_filter(struct ieee802154_hw *hw,
@@ -468,8 +676,8 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
 		addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff;
 		addrl = le16_to_cpu(filt->short_addr) & 0xff;
 
-		write_short_reg(devrec, REG_SADRH, addrh);
-		write_short_reg(devrec, REG_SADRL, addrl);
+		regmap_write(devrec->regmap_short, REG_SADRH, addrh);
+		regmap_write(devrec->regmap_short, REG_SADRL, addrl);
 		dev_dbg(printdev(devrec),
 			"Set short addr to %04hx\n", filt->short_addr);
 	}
@@ -480,7 +688,8 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
 
 		memcpy(addr, &filt->ieee_addr, 8);
 		for (i = 0; i < 8; i++)
-			write_short_reg(devrec, REG_EADR0 + i, addr[i]);
+			regmap_write(devrec->regmap_short, REG_EADR0 + i,
+				     addr[i]);
 
 #ifdef DEBUG
 		pr_debug("Set long addr to: ");
@@ -496,8 +705,8 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
 
 		panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff;
 		panidl = le16_to_cpu(filt->pan_id) & 0xff;
-		write_short_reg(devrec, REG_PANIDH, panidh);
-		write_short_reg(devrec, REG_PANIDL, panidl);
+		regmap_write(devrec->regmap_short, REG_PANIDH, panidh);
+		regmap_write(devrec->regmap_short, REG_PANIDL, panidl);
 
 		dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id);
 	}
@@ -507,14 +716,14 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
 		u8 val;
 		int ret;
 
-		ret = read_short_reg(devrec, REG_RXMCR, &val);
-		if (ret)
-			return ret;
 		if (filt->pan_coord)
-			val |= 0x8;
+			val = BIT_PANCOORD;
 		else
-			val &= ~0x8;
-		write_short_reg(devrec, REG_RXMCR, val);
+			val = 0;
+		ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+					 BIT_PANCOORD, val);
+		if (ret)
+			return ret;
 
 		/* REG_SLOTTED is maintained as default (unslotted/CSMA-CA).
 		 * REG_ORDER is maintained as default (no beacon/superframe).
@@ -527,168 +736,392 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
 	return 0;
 }
 
-static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
+static void mrf24j40_handle_rx_read_buf_unlock(struct mrf24j40 *devrec)
 {
-	u8 len = RX_FIFO_SIZE;
-	u8 lqi = 0;
-	u8 val;
-	int ret = 0;
-	int ret2;
-	struct sk_buff *skb;
+	int ret;
 
-	/* Turn off reception of packets off the air. This prevents the
-	 * device from overwriting the buffer while we're reading it. */
-	ret = read_short_reg(devrec, REG_BBREG1, &val);
+	/* Turn back on reception of packets off the air. */
+	devrec->rx_msg.complete = NULL;
+	devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1);
+	devrec->rx_buf[1] = 0x00; /* CLR RXDECINV */
+	ret = spi_async(devrec->spi, &devrec->rx_msg);
 	if (ret)
-		goto out;
-	val |= 4; /* SET RXDECINV */
-	write_short_reg(devrec, REG_BBREG1, val);
+		dev_err(printdev(devrec), "failed to unlock rx buffer\n");
+}
+
+static void mrf24j40_handle_rx_read_buf_complete(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	u8 len = devrec->rx_buf[2];
+	u8 rx_local_buf[RX_FIFO_SIZE];
+	struct sk_buff *skb;
+
+	memcpy(rx_local_buf, devrec->rx_fifo_buf, len);
+	mrf24j40_handle_rx_read_buf_unlock(devrec);
 
-	skb = dev_alloc_skb(len);
+	skb = dev_alloc_skb(IEEE802154_MTU);
 	if (!skb) {
-		ret = -ENOMEM;
-		goto out;
+		dev_err(printdev(devrec), "failed to allocate skb\n");
+		return;
 	}
 
-	ret = mrf24j40_read_rx_buf(devrec, skb_put(skb, len), &len, &lqi);
-	if (ret < 0) {
-		dev_err(printdev(devrec), "Failure reading RX FIFO\n");
-		kfree_skb(skb);
-		ret = -EINVAL;
-		goto out;
+	memcpy(skb_put(skb, len), rx_local_buf, len);
+	ieee802154_rx_irqsafe(devrec->hw, skb, 0);
+
+#ifdef DEBUG
+	 print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", DUMP_PREFIX_OFFSET, 16, 1,
+			rx_local_buf, len, 0);
+	 pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n",
+		  devrec->rx_lqi_buf[0], devrec->rx_lqi_buf[1]);
+#endif
+}
+
+static void mrf24j40_handle_rx_read_buf(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	u16 cmd;
+	int ret;
+
+	/* if length is invalid read the full MTU */
+	if (!ieee802154_is_valid_psdu_len(devrec->rx_buf[2]))
+		devrec->rx_buf[2] = IEEE802154_MTU;
+
+	cmd = MRF24J40_READLONG(REG_RX_FIFO + 1);
+	devrec->rx_addr_buf[0] = cmd >> 8 & 0xff;
+	devrec->rx_addr_buf[1] = cmd & 0xff;
+	devrec->rx_fifo_buf_trx.len = devrec->rx_buf[2];
+	ret = spi_async(devrec->spi, &devrec->rx_buf_msg);
+	if (ret) {
+		dev_err(printdev(devrec), "failed to read rx buffer\n");
+		mrf24j40_handle_rx_read_buf_unlock(devrec);
 	}
+}
 
-	/* Cut off the checksum */
-	skb_trim(skb, len-2);
+static void mrf24j40_handle_rx_read_len(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	u16 cmd;
+	int ret;
 
-	/* TODO: Other drivers call ieee20154_rx_irqsafe() here (eg: cc2040,
-	 * also from a workqueue).  I think irqsafe is not necessary here.
-	 * Can someone confirm? */
-	ieee802154_rx_irqsafe(devrec->hw, skb, lqi);
+	/* read the length of received frame */
+	devrec->rx_msg.complete = mrf24j40_handle_rx_read_buf;
+	devrec->rx_trx.len = 3;
+	cmd = MRF24J40_READLONG(REG_RX_FIFO);
+	devrec->rx_buf[0] = cmd >> 8 & 0xff;
+	devrec->rx_buf[1] = cmd & 0xff;
 
-	dev_dbg(printdev(devrec), "RX Handled\n");
+	ret = spi_async(devrec->spi, &devrec->rx_msg);
+	if (ret) {
+		dev_err(printdev(devrec), "failed to read rx buffer length\n");
+		mrf24j40_handle_rx_read_buf_unlock(devrec);
+	}
+}
 
-out:
-	/* Turn back on reception of packets off the air. */
-	ret2 = read_short_reg(devrec, REG_BBREG1, &val);
-	if (ret2)
-		return ret2;
-	val &= ~0x4; /* Clear RXDECINV */
-	write_short_reg(devrec, REG_BBREG1, val);
+static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
+{
+	/* Turn off reception of packets off the air. This prevents the
+	 * device from overwriting the buffer while we're reading it.
+	 */
+	devrec->rx_msg.complete = mrf24j40_handle_rx_read_len;
+	devrec->rx_trx.len = 2;
+	devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1);
+	devrec->rx_buf[1] = BIT_RXDECINV; /* SET RXDECINV */
+
+	return spi_async(devrec->spi, &devrec->rx_msg);
+}
+
+static int
+mrf24j40_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be,
+		     u8 retries)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	u8 val;
+
+	/* min_be */
+	val = min_be << TXMCR_MIN_BE_SHIFT;
+	/* csma backoffs */
+	val |= retries << TXMCR_CSMA_RETRIES_SHIFT;
+
+	return regmap_update_bits(devrec->regmap_short, REG_TXMCR,
+				  TXMCR_MIN_BE_MASK | TXMCR_CSMA_RETRIES_MASK,
+				  val);
+}
+
+static int mrf24j40_set_cca_mode(struct ieee802154_hw *hw,
+				 const struct wpan_phy_cca *cca)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	u8 val;
+
+	/* mapping 802.15.4 to driver spec */
+	switch (cca->mode) {
+	case NL802154_CCA_ENERGY:
+		val = 2;
+		break;
+	case NL802154_CCA_CARRIER:
+		val = 1;
+		break;
+	case NL802154_CCA_ENERGY_CARRIER:
+		switch (cca->opt) {
+		case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
+			val = 3;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(devrec->regmap_short, REG_BBREG2,
+				  BBREG2_CCA_MODE_MASK,
+				  val << BBREG2_CCA_MODE_SHIFT);
+}
+
+/* array for representing ed levels */
+static const s32 mrf24j40_ed_levels[] = {
+	-9000, -8900, -8800, -8700, -8600, -8500, -8400, -8300, -8200, -8100,
+	-8000, -7900, -7800, -7700, -7600, -7500, -7400, -7300, -7200, -7100,
+	-7000, -6900, -6800, -6700, -6600, -6500, -6400, -6300, -6200, -6100,
+	-6000, -5900, -5800, -5700, -5600, -5500, -5400, -5300, -5200, -5100,
+	-5000, -4900, -4800, -4700, -4600, -4500, -4400, -4300, -4200, -4100,
+	-4000, -3900, -3800, -3700, -3600, -3500
+};
+
+/* map ed levels to register value */
+static const s32 mrf24j40_ed_levels_map[][2] = {
+	{ -9000, 0 }, { -8900, 1 }, { -8800, 2 }, { -8700, 5 }, { -8600, 9 },
+	{ -8500, 13 }, { -8400, 18 }, { -8300, 23 }, { -8200, 27 },
+	{ -8100, 32 }, { -8000, 37 }, { -7900, 43 }, { -7800, 48 },
+	{ -7700, 53 }, { -7600, 58 }, { -7500, 63 }, { -7400, 68 },
+	{ -7300, 73 }, { -7200, 78 }, { -7100, 83 }, { -7000, 89 },
+	{ -6900, 95 }, { -6800, 100 }, { -6700, 107 }, { -6600, 111 },
+	{ -6500, 117 }, { -6400, 121 }, { -6300, 125 }, { -6200, 129 },
+	{ -6100, 133 },	{ -6000, 138 }, { -5900, 143 }, { -5800, 148 },
+	{ -5700, 153 }, { -5600, 159 },	{ -5500, 165 }, { -5400, 170 },
+	{ -5300, 176 }, { -5200, 183 }, { -5100, 188 }, { -5000, 193 },
+	{ -4900, 198 }, { -4800, 203 }, { -4700, 207 }, { -4600, 212 },
+	{ -4500, 216 }, { -4400, 221 }, { -4300, 225 }, { -4200, 228 },
+	{ -4100, 233 }, { -4000, 239 }, { -3900, 245 }, { -3800, 250 },
+	{ -3700, 253 }, { -3600, 254 }, { -3500, 255 },
+};
+
+static int mrf24j40_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mrf24j40_ed_levels_map); i++) {
+		if (mrf24j40_ed_levels_map[i][0] == mbm)
+			return regmap_write(devrec->regmap_short, REG_CCAEDTH,
+					    mrf24j40_ed_levels_map[i][1]);
+	}
+
+	return -EINVAL;
+}
+
+static const s32 mrf24j40ma_powers[] = {
+	0, -50, -120, -190, -280, -370, -490, -630, -1000, -1050, -1120, -1190,
+	-1280, -1370, -1490, -1630, -2000, -2050, -2120, -2190, -2280, -2370,
+	-2490, -2630, -3000, -3050, -3120, -3190, -3280, -3370, -3490, -3630,
+};
+
+static int mrf24j40_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	s32 small_scale;
+	u8 val;
+
+	if (0 >= mbm && mbm > -1000) {
+		val = TXPWRL_0 << TXPWRL_SHIFT;
+		small_scale = mbm;
+	} else if (-1000 >= mbm && mbm > -2000) {
+		val = TXPWRL_10 << TXPWRL_SHIFT;
+		small_scale = mbm + 1000;
+	} else if (-2000 >= mbm && mbm > -3000) {
+		val = TXPWRL_20 << TXPWRL_SHIFT;
+		small_scale = mbm + 2000;
+	} else if (-3000 >= mbm && mbm > -4000) {
+		val = TXPWRL_30 << TXPWRL_SHIFT;
+		small_scale = mbm + 3000;
+	} else {
+		return -EINVAL;
+	}
+
+	switch (small_scale) {
+	case 0:
+		val |= (TXPWRS_0 << TXPWRS_SHIFT);
+		break;
+	case -50:
+		val |= (TXPWRS_0_5 << TXPWRS_SHIFT);
+		break;
+	case -120:
+		val |= (TXPWRS_1_2 << TXPWRS_SHIFT);
+		break;
+	case -190:
+		val |= (TXPWRS_1_9 << TXPWRS_SHIFT);
+		break;
+	case -280:
+		val |= (TXPWRS_2_8 << TXPWRS_SHIFT);
+		break;
+	case -370:
+		val |= (TXPWRS_3_7 << TXPWRS_SHIFT);
+		break;
+	case -490:
+		val |= (TXPWRS_4_9 << TXPWRS_SHIFT);
+		break;
+	case -630:
+		val |= (TXPWRS_6_3 << TXPWRS_SHIFT);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(devrec->regmap_long, REG_RFCON3,
+				  TXPWRL_MASK | TXPWRS_MASK, val);
+}
+
+static int mrf24j40_set_promiscuous_mode(struct ieee802154_hw *hw, bool on)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	int ret;
+
+	if (on) {
+		/* set PROMI, ERRPKT and NOACKRSP */
+		ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+					 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP,
+					 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP);
+	} else {
+		/* clear PROMI, ERRPKT and NOACKRSP */
+		ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+					 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP,
+					 0);
+	}
 
 	return ret;
 }
 
 static const struct ieee802154_ops mrf24j40_ops = {
 	.owner = THIS_MODULE,
-	.xmit_sync = mrf24j40_tx,
+	.xmit_async = mrf24j40_tx,
 	.ed = mrf24j40_ed,
 	.start = mrf24j40_start,
 	.stop = mrf24j40_stop,
 	.set_channel = mrf24j40_set_channel,
 	.set_hw_addr_filt = mrf24j40_filter,
+	.set_csma_params = mrf24j40_csma_params,
+	.set_cca_mode = mrf24j40_set_cca_mode,
+	.set_cca_ed_level = mrf24j40_set_cca_ed_level,
+	.set_txpower = mrf24j40_set_txpower,
+	.set_promiscuous_mode = mrf24j40_set_promiscuous_mode,
 };
 
-static irqreturn_t mrf24j40_isr(int irq, void *data)
+static void mrf24j40_intstat_complete(void *context)
 {
-	struct mrf24j40 *devrec = data;
-	u8 intstat;
-	int ret;
+	struct mrf24j40 *devrec = context;
+	u8 intstat = devrec->irq_buf[1];
 
-	/* Read the interrupt status */
-	ret = read_short_reg(devrec, REG_INTSTAT, &intstat);
-	if (ret)
-		goto out;
+	enable_irq(devrec->spi->irq);
 
 	/* Check for TX complete */
-	if (intstat & 0x1)
-		complete(&devrec->tx_complete);
+	if (intstat & BIT_TXNIF)
+		ieee802154_xmit_complete(devrec->hw, devrec->tx_skb, false);
 
 	/* Check for Rx */
-	if (intstat & 0x8)
+	if (intstat & BIT_RXIF)
 		mrf24j40_handle_rx(devrec);
+}
+
+static irqreturn_t mrf24j40_isr(int irq, void *data)
+{
+	struct mrf24j40 *devrec = data;
+	int ret;
+
+	disable_irq_nosync(irq);
+
+	devrec->irq_buf[0] = MRF24J40_READSHORT(REG_INTSTAT);
+	/* Read the interrupt status */
+	ret = spi_async(devrec->spi, &devrec->irq_msg);
+	if (ret) {
+		enable_irq(irq);
+		return IRQ_NONE;
+	}
 
-out:
 	return IRQ_HANDLED;
 }
 
 static int mrf24j40_hw_init(struct mrf24j40 *devrec)
 {
+	u32 irq_type;
 	int ret;
-	u8 val;
 
 	/* Initialize the device.
 		From datasheet section 3.2: Initialization. */
-	ret = write_short_reg(devrec, REG_SOFTRST, 0x07);
+	ret = regmap_write(devrec->regmap_short, REG_SOFTRST, 0x07);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_PACON2, 0x98);
+	ret = regmap_write(devrec->regmap_short, REG_PACON2, 0x98);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_TXSTBL, 0x95);
+	ret = regmap_write(devrec->regmap_short, REG_TXSTBL, 0x95);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON0, 0x03);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON0, 0x03);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON1, 0x01);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON1, 0x01);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON2, 0x80);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON2, 0x80);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON6, 0x90);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON6, 0x90);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON7, 0x80);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON7, 0x80);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_RFCON8, 0x10);
+	ret = regmap_write(devrec->regmap_long, REG_RFCON8, 0x10);
 	if (ret)
 		goto err_ret;
 
-	ret = write_long_reg(devrec, REG_SLPCON1, 0x21);
+	ret = regmap_write(devrec->regmap_long, REG_SLPCON1, 0x21);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_BBREG2, 0x80);
+	ret = regmap_write(devrec->regmap_short, REG_BBREG2, 0x80);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_CCAEDTH, 0x60);
+	ret = regmap_write(devrec->regmap_short, REG_CCAEDTH, 0x60);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_BBREG6, 0x40);
+	ret = regmap_write(devrec->regmap_short, REG_BBREG6, 0x40);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_RFCTL, 0x04);
+	ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x04);
 	if (ret)
 		goto err_ret;
 
-	ret = write_short_reg(devrec, REG_RFCTL, 0x0);
+	ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x0);
 	if (ret)
 		goto err_ret;
 
 	udelay(192);
 
 	/* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */
-	ret = read_short_reg(devrec, REG_RXMCR, &val);
-	if (ret)
-		goto err_ret;
-
-	val &= ~0x3; /* Clear RX mode (normal) */
-
-	ret = write_short_reg(devrec, REG_RXMCR, val);
+	ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x03, 0x00);
 	if (ret)
 		goto err_ret;
 
@@ -696,22 +1129,39 @@ static int mrf24j40_hw_init(struct mrf24j40 *devrec)
 		/* Enable external amplifier.
 		 * From MRF24J40MC datasheet section 1.3: Operation.
 		 */
-		read_long_reg(devrec, REG_TESTMODE, &val);
-		val |= 0x7; /* Configure GPIO 0-2 to control amplifier */
-		write_long_reg(devrec, REG_TESTMODE, val);
+		regmap_update_bits(devrec->regmap_long, REG_TESTMODE, 0x07,
+				   0x07);
 
-		read_short_reg(devrec, REG_TRISGPIO, &val);
-		val |= 0x8; /* Set GPIO3 as output. */
-		write_short_reg(devrec, REG_TRISGPIO, val);
+		/* Set GPIO3 as output. */
+		regmap_update_bits(devrec->regmap_short, REG_TRISGPIO, 0x08,
+				   0x08);
 
-		read_short_reg(devrec, REG_GPIO, &val);
-		val |= 0x8; /* Set GPIO3 HIGH to enable U5 voltage regulator */
-		write_short_reg(devrec, REG_GPIO, val);
+		/* Set GPIO3 HIGH to enable U5 voltage regulator */
+		regmap_update_bits(devrec->regmap_short, REG_GPIO, 0x08, 0x08);
 
 		/* Reduce TX pwr to meet FCC requirements.
 		 * From MRF24J40MC datasheet section 3.1.1
 		 */
-		write_long_reg(devrec, REG_RFCON3, 0x28);
+		regmap_write(devrec->regmap_long, REG_RFCON3, 0x28);
+	}
+
+	irq_type = irq_get_trigger_type(devrec->spi->irq);
+	if (irq_type == IRQ_TYPE_EDGE_RISING ||
+	    irq_type == IRQ_TYPE_EDGE_FALLING)
+		dev_warn(&devrec->spi->dev,
+			 "Using edge triggered irq's are not recommended, because it can cause races and result in a non-functional driver!\n");
+	switch (irq_type) {
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_LEVEL_HIGH:
+		/* set interrupt polarity to rising */
+		ret = regmap_update_bits(devrec->regmap_long, REG_SLPCON0,
+					 BIT_INTEDGE, BIT_INTEDGE);
+		if (ret)
+			goto err_ret;
+		break;
+	default:
+		/* default is falling edge */
+		break;
 	}
 
 	return 0;
@@ -720,67 +1170,178 @@ err_ret:
 	return ret;
 }
 
-static int mrf24j40_probe(struct spi_device *spi)
+static void
+mrf24j40_setup_tx_spi_messages(struct mrf24j40 *devrec)
 {
-	int ret = -ENOMEM;
-	struct mrf24j40 *devrec;
+	spi_message_init(&devrec->tx_msg);
+	devrec->tx_msg.context = devrec;
+	devrec->tx_msg.complete = write_tx_buf_complete;
+	devrec->tx_hdr_trx.len = 2;
+	devrec->tx_hdr_trx.tx_buf = devrec->tx_hdr_buf;
+	spi_message_add_tail(&devrec->tx_hdr_trx, &devrec->tx_msg);
+	devrec->tx_len_trx.len = 2;
+	devrec->tx_len_trx.tx_buf = devrec->tx_len_buf;
+	spi_message_add_tail(&devrec->tx_len_trx, &devrec->tx_msg);
+	spi_message_add_tail(&devrec->tx_buf_trx, &devrec->tx_msg);
+
+	spi_message_init(&devrec->tx_post_msg);
+	devrec->tx_post_msg.context = devrec;
+	devrec->tx_post_trx.len = 2;
+	devrec->tx_post_trx.tx_buf = devrec->tx_post_buf;
+	spi_message_add_tail(&devrec->tx_post_trx, &devrec->tx_post_msg);
+}
 
-	dev_info(&spi->dev, "probe(). IRQ: %d\n", spi->irq);
+static void
+mrf24j40_setup_rx_spi_messages(struct mrf24j40 *devrec)
+{
+	spi_message_init(&devrec->rx_msg);
+	devrec->rx_msg.context = devrec;
+	devrec->rx_trx.len = 2;
+	devrec->rx_trx.tx_buf = devrec->rx_buf;
+	devrec->rx_trx.rx_buf = devrec->rx_buf;
+	spi_message_add_tail(&devrec->rx_trx, &devrec->rx_msg);
+
+	spi_message_init(&devrec->rx_buf_msg);
+	devrec->rx_buf_msg.context = devrec;
+	devrec->rx_buf_msg.complete = mrf24j40_handle_rx_read_buf_complete;
+	devrec->rx_addr_trx.len = 2;
+	devrec->rx_addr_trx.tx_buf = devrec->rx_addr_buf;
+	spi_message_add_tail(&devrec->rx_addr_trx, &devrec->rx_buf_msg);
+	devrec->rx_fifo_buf_trx.rx_buf = devrec->rx_fifo_buf;
+	spi_message_add_tail(&devrec->rx_fifo_buf_trx, &devrec->rx_buf_msg);
+	devrec->rx_lqi_trx.len = 2;
+	devrec->rx_lqi_trx.rx_buf = devrec->rx_lqi_buf;
+	spi_message_add_tail(&devrec->rx_lqi_trx, &devrec->rx_buf_msg);
+}
 
-	devrec = devm_kzalloc(&spi->dev, sizeof(struct mrf24j40), GFP_KERNEL);
-	if (!devrec)
-		goto err_ret;
-	devrec->buf = devm_kzalloc(&spi->dev, 3, GFP_KERNEL);
-	if (!devrec->buf)
-		goto err_ret;
+static void
+mrf24j40_setup_irq_spi_messages(struct mrf24j40 *devrec)
+{
+	spi_message_init(&devrec->irq_msg);
+	devrec->irq_msg.context = devrec;
+	devrec->irq_msg.complete = mrf24j40_intstat_complete;
+	devrec->irq_trx.len = 2;
+	devrec->irq_trx.tx_buf = devrec->irq_buf;
+	devrec->irq_trx.rx_buf = devrec->irq_buf;
+	spi_message_add_tail(&devrec->irq_trx, &devrec->irq_msg);
+}
+
+static void  mrf24j40_phy_setup(struct mrf24j40 *devrec)
+{
+	ieee802154_random_extended_addr(&devrec->hw->phy->perm_extended_addr);
+	devrec->hw->phy->current_channel = 11;
+
+	/* mrf24j40 supports max_minbe 0 - 3 */
+	devrec->hw->phy->supported.max_minbe = 3;
+	/* datasheet doesn't say anything about max_be, but we have min_be
+	 * So we assume the max_be default.
+	 */
+	devrec->hw->phy->supported.min_maxbe = 5;
+	devrec->hw->phy->supported.max_maxbe = 5;
+
+	devrec->hw->phy->cca.mode = NL802154_CCA_CARRIER;
+	devrec->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+					       BIT(NL802154_CCA_CARRIER) |
+					       BIT(NL802154_CCA_ENERGY_CARRIER);
+	devrec->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND);
+
+	devrec->hw->phy->cca_ed_level = -6900;
+	devrec->hw->phy->supported.cca_ed_levels = mrf24j40_ed_levels;
+	devrec->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(mrf24j40_ed_levels);
+
+	switch (spi_get_device_id(devrec->spi)->driver_data) {
+	case MRF24J40:
+	case MRF24J40MA:
+		devrec->hw->phy->supported.tx_powers = mrf24j40ma_powers;
+		devrec->hw->phy->supported.tx_powers_size = ARRAY_SIZE(mrf24j40ma_powers);
+		devrec->hw->phy->flags |= WPAN_PHY_FLAG_TXPOWER;
+		break;
+	default:
+		break;
+	}
+}
 
-	spi->mode = SPI_MODE_0; /* TODO: Is this appropriate for right here? */
-	if (spi->max_speed_hz > MAX_SPI_SPEED_HZ)
-		spi->max_speed_hz = MAX_SPI_SPEED_HZ;
+static int mrf24j40_probe(struct spi_device *spi)
+{
+	int ret = -ENOMEM, irq_type;
+	struct ieee802154_hw *hw;
+	struct mrf24j40 *devrec;
 
-	mutex_init(&devrec->buffer_mutex);
-	init_completion(&devrec->tx_complete);
-	devrec->spi = spi;
-	spi_set_drvdata(spi, devrec);
+	dev_info(&spi->dev, "probe(). IRQ: %d\n", spi->irq);
 
 	/* Register with the 802154 subsystem */
 
-	devrec->hw = ieee802154_alloc_hw(0, &mrf24j40_ops);
-	if (!devrec->hw)
+	hw = ieee802154_alloc_hw(sizeof(*devrec), &mrf24j40_ops);
+	if (!hw)
 		goto err_ret;
 
-	devrec->hw->priv = devrec;
-	devrec->hw->parent = &devrec->spi->dev;
+	devrec = hw->priv;
+	devrec->spi = spi;
+	spi_set_drvdata(spi, devrec);
+	devrec->hw = hw;
+	devrec->hw->parent = &spi->dev;
 	devrec->hw->phy->supported.channels[0] = CHANNEL_MASK;
-	devrec->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AFILT;
+	devrec->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
+			    IEEE802154_HW_CSMA_PARAMS |
+			    IEEE802154_HW_PROMISCUOUS;
+
+	devrec->hw->phy->flags = WPAN_PHY_FLAG_CCA_MODE |
+				 WPAN_PHY_FLAG_CCA_ED_LEVEL;
+
+	mrf24j40_setup_tx_spi_messages(devrec);
+	mrf24j40_setup_rx_spi_messages(devrec);
+	mrf24j40_setup_irq_spi_messages(devrec);
+
+	devrec->regmap_short = devm_regmap_init_spi(spi,
+						    &mrf24j40_short_regmap);
+	if (IS_ERR(devrec->regmap_short)) {
+		ret = PTR_ERR(devrec->regmap_short);
+		dev_err(&spi->dev, "Failed to allocate short register map: %d\n",
+			ret);
+		goto err_register_device;
+	}
 
-	dev_dbg(printdev(devrec), "registered mrf24j40\n");
-	ret = ieee802154_register_hw(devrec->hw);
-	if (ret)
+	devrec->regmap_long = devm_regmap_init(&spi->dev,
+					       &mrf24j40_long_regmap_bus,
+					       spi, &mrf24j40_long_regmap);
+	if (IS_ERR(devrec->regmap_long)) {
+		ret = PTR_ERR(devrec->regmap_long);
+		dev_err(&spi->dev, "Failed to allocate long register map: %d\n",
+			ret);
 		goto err_register_device;
+	}
+
+	if (spi->max_speed_hz > MAX_SPI_SPEED_HZ) {
+		dev_warn(&spi->dev, "spi clock above possible maximum: %d",
+			 MAX_SPI_SPEED_HZ);
+		return -EINVAL;
+	}
 
 	ret = mrf24j40_hw_init(devrec);
 	if (ret)
-		goto err_hw_init;
+		goto err_register_device;
 
-	ret = devm_request_threaded_irq(&spi->dev,
-					spi->irq,
-					NULL,
-					mrf24j40_isr,
-					IRQF_TRIGGER_LOW|IRQF_ONESHOT,
-					dev_name(&spi->dev),
-					devrec);
+	mrf24j40_phy_setup(devrec);
 
+	/* request IRQF_TRIGGER_LOW as fallback default */
+	irq_type = irq_get_trigger_type(spi->irq);
+	if (!irq_type)
+		irq_type = IRQF_TRIGGER_LOW;
+
+	ret = devm_request_irq(&spi->dev, spi->irq, mrf24j40_isr,
+			       irq_type, dev_name(&spi->dev), devrec);
 	if (ret) {
 		dev_err(printdev(devrec), "Unable to get IRQ");
-		goto err_irq;
+		goto err_register_device;
 	}
 
+	dev_dbg(printdev(devrec), "registered mrf24j40\n");
+	ret = ieee802154_register_hw(devrec->hw);
+	if (ret)
+		goto err_register_device;
+
 	return 0;
 
-err_irq:
-err_hw_init:
-	ieee802154_unregister_hw(devrec->hw);
 err_register_device:
 	ieee802154_free_hw(devrec->hw);
 err_ret:
@@ -801,6 +1362,14 @@ static int mrf24j40_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct of_device_id mrf24j40_of_match[] = {
+	{ .compatible = "microchip,mrf24j40", .data = (void *)MRF24J40 },
+	{ .compatible = "microchip,mrf24j40ma", .data = (void *)MRF24J40MA },
+	{ .compatible = "microchip,mrf24j40mc", .data = (void *)MRF24J40MC },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mrf24j40_of_match);
+
 static const struct spi_device_id mrf24j40_ids[] = {
 	{ "mrf24j40", MRF24J40 },
 	{ "mrf24j40ma", MRF24J40MA },
@@ -811,8 +1380,8 @@ MODULE_DEVICE_TABLE(spi, mrf24j40_ids);
 
 static struct spi_driver mrf24j40_driver = {
 	.driver = {
+		.of_match_table = of_match_ptr(mrf24j40_of_match),
 		.name = "mrf24j40",
-		.owner = THIS_MODULE,
 	},
 	.id_table = mrf24j40_ids,
 	.probe = mrf24j40_probe,