Linux-libre 4.2-gnu

9 files changed, 1552 insertions, 390 deletions

diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index 1a3c3e57a..1dd5ab8e5 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -53,3 +53,13 @@ config IEEE802154_CC2520
 
 	  This driver can also be built as a module. To do so, say M here.
 	  the module will be called 'cc2520'.
+
+config IEEE802154_ATUSB
+	tristate "ATUSB transceiver driver"
+	depends on IEEE802154_DRIVERS && MAC802154 && USB
+	---help---
+	  Say Y here to enable the ATUSB IEEE 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so say M here.
+	  The module will be called 'atusb'.
diff --git a/drivers/net/ieee802154/Makefile b/drivers/net/ieee802154/Makefile
index d77fa4d77..cf1d2a6db 100644
--- a/drivers/net/ieee802154/Makefile
+++ b/drivers/net/ieee802154/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_IEEE802154_FAKELB) += fakelb.o
 obj-$(CONFIG_IEEE802154_AT86RF230) += at86rf230.o
 obj-$(CONFIG_IEEE802154_MRF24J40) += mrf24j40.o
 obj-$(CONFIG_IEEE802154_CC2520) += cc2520.o
+obj-$(CONFIG_IEEE802154_ATUSB) += atusb.o
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 67d00fbc2..f7bd9f3dd 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -35,6 +35,8 @@
 #include <net/mac802154.h>
 #include <net/cfg802154.h>
 
+#include "at86rf230.h"
+
 struct at86rf230_local;
 /* at86rf2xx chip depend data.
  * All timings are in us.
@@ -45,12 +47,14 @@ struct at86rf2xx_chip_data {
 	u16 t_reset_to_off;
 	u16 t_off_to_aack;
 	u16 t_off_to_tx_on;
+	u16 t_off_to_sleep;
+	u16 t_sleep_to_off;
 	u16 t_frame;
 	u16 t_p_ack;
 	int rssi_base_val;
 
 	int (*set_channel)(struct at86rf230_local *, u8, u8);
-	int (*get_desense_steps)(struct at86rf230_local *, s32);
+	int (*set_txpower)(struct at86rf230_local *, s32);
 };
 
 #define AT86RF2XX_MAX_BUF		(127 + 3)
@@ -86,6 +90,7 @@ struct at86rf230_local {
 	struct at86rf2xx_chip_data *data;
 	struct regmap *regmap;
 	int slp_tr;
+	bool sleep;
 
 	struct completion state_complete;
 	struct at86rf230_state_change state;
@@ -102,200 +107,6 @@ struct at86rf230_local {
 	struct at86rf230_state_change tx;
 };
 
-#define RG_TRX_STATUS	(0x01)
-#define SR_TRX_STATUS		0x01, 0x1f, 0
-#define SR_RESERVED_01_3	0x01, 0x20, 5
-#define SR_CCA_STATUS		0x01, 0x40, 6
-#define SR_CCA_DONE		0x01, 0x80, 7
-#define RG_TRX_STATE	(0x02)
-#define SR_TRX_CMD		0x02, 0x1f, 0
-#define SR_TRAC_STATUS		0x02, 0xe0, 5
-#define RG_TRX_CTRL_0	(0x03)
-#define SR_CLKM_CTRL		0x03, 0x07, 0
-#define SR_CLKM_SHA_SEL		0x03, 0x08, 3
-#define SR_PAD_IO_CLKM		0x03, 0x30, 4
-#define SR_PAD_IO		0x03, 0xc0, 6
-#define RG_TRX_CTRL_1	(0x04)
-#define SR_IRQ_POLARITY		0x04, 0x01, 0
-#define SR_IRQ_MASK_MODE	0x04, 0x02, 1
-#define SR_SPI_CMD_MODE		0x04, 0x0c, 2
-#define SR_RX_BL_CTRL		0x04, 0x10, 4
-#define SR_TX_AUTO_CRC_ON	0x04, 0x20, 5
-#define SR_IRQ_2_EXT_EN		0x04, 0x40, 6
-#define SR_PA_EXT_EN		0x04, 0x80, 7
-#define RG_PHY_TX_PWR	(0x05)
-#define SR_TX_PWR		0x05, 0x0f, 0
-#define SR_PA_LT		0x05, 0x30, 4
-#define SR_PA_BUF_LT		0x05, 0xc0, 6
-#define RG_PHY_RSSI	(0x06)
-#define SR_RSSI			0x06, 0x1f, 0
-#define SR_RND_VALUE		0x06, 0x60, 5
-#define SR_RX_CRC_VALID		0x06, 0x80, 7
-#define RG_PHY_ED_LEVEL	(0x07)
-#define SR_ED_LEVEL		0x07, 0xff, 0
-#define RG_PHY_CC_CCA	(0x08)
-#define SR_CHANNEL		0x08, 0x1f, 0
-#define SR_CCA_MODE		0x08, 0x60, 5
-#define SR_CCA_REQUEST		0x08, 0x80, 7
-#define RG_CCA_THRES	(0x09)
-#define SR_CCA_ED_THRES		0x09, 0x0f, 0
-#define SR_RESERVED_09_1	0x09, 0xf0, 4
-#define RG_RX_CTRL	(0x0a)
-#define SR_PDT_THRES		0x0a, 0x0f, 0
-#define SR_RESERVED_0a_1	0x0a, 0xf0, 4
-#define RG_SFD_VALUE	(0x0b)
-#define SR_SFD_VALUE		0x0b, 0xff, 0
-#define RG_TRX_CTRL_2	(0x0c)
-#define SR_OQPSK_DATA_RATE	0x0c, 0x03, 0
-#define SR_SUB_MODE		0x0c, 0x04, 2
-#define SR_BPSK_QPSK		0x0c, 0x08, 3
-#define SR_OQPSK_SUB1_RC_EN	0x0c, 0x10, 4
-#define SR_RESERVED_0c_5	0x0c, 0x60, 5
-#define SR_RX_SAFE_MODE		0x0c, 0x80, 7
-#define RG_ANT_DIV	(0x0d)
-#define SR_ANT_CTRL		0x0d, 0x03, 0
-#define SR_ANT_EXT_SW_EN	0x0d, 0x04, 2
-#define SR_ANT_DIV_EN		0x0d, 0x08, 3
-#define SR_RESERVED_0d_2	0x0d, 0x70, 4
-#define SR_ANT_SEL		0x0d, 0x80, 7
-#define RG_IRQ_MASK	(0x0e)
-#define SR_IRQ_MASK		0x0e, 0xff, 0
-#define RG_IRQ_STATUS	(0x0f)
-#define SR_IRQ_0_PLL_LOCK	0x0f, 0x01, 0
-#define SR_IRQ_1_PLL_UNLOCK	0x0f, 0x02, 1
-#define SR_IRQ_2_RX_START	0x0f, 0x04, 2
-#define SR_IRQ_3_TRX_END	0x0f, 0x08, 3
-#define SR_IRQ_4_CCA_ED_DONE	0x0f, 0x10, 4
-#define SR_IRQ_5_AMI		0x0f, 0x20, 5
-#define SR_IRQ_6_TRX_UR		0x0f, 0x40, 6
-#define SR_IRQ_7_BAT_LOW	0x0f, 0x80, 7
-#define RG_VREG_CTRL	(0x10)
-#define SR_RESERVED_10_6	0x10, 0x03, 0
-#define SR_DVDD_OK		0x10, 0x04, 2
-#define SR_DVREG_EXT		0x10, 0x08, 3
-#define SR_RESERVED_10_3	0x10, 0x30, 4
-#define SR_AVDD_OK		0x10, 0x40, 6
-#define SR_AVREG_EXT		0x10, 0x80, 7
-#define RG_BATMON	(0x11)
-#define SR_BATMON_VTH		0x11, 0x0f, 0
-#define SR_BATMON_HR		0x11, 0x10, 4
-#define SR_BATMON_OK		0x11, 0x20, 5
-#define SR_RESERVED_11_1	0x11, 0xc0, 6
-#define RG_XOSC_CTRL	(0x12)
-#define SR_XTAL_TRIM		0x12, 0x0f, 0
-#define SR_XTAL_MODE		0x12, 0xf0, 4
-#define RG_RX_SYN	(0x15)
-#define SR_RX_PDT_LEVEL		0x15, 0x0f, 0
-#define SR_RESERVED_15_2	0x15, 0x70, 4
-#define SR_RX_PDT_DIS		0x15, 0x80, 7
-#define RG_XAH_CTRL_1	(0x17)
-#define SR_RESERVED_17_8	0x17, 0x01, 0
-#define SR_AACK_PROM_MODE	0x17, 0x02, 1
-#define SR_AACK_ACK_TIME	0x17, 0x04, 2
-#define SR_RESERVED_17_5	0x17, 0x08, 3
-#define SR_AACK_UPLD_RES_FT	0x17, 0x10, 4
-#define SR_AACK_FLTR_RES_FT	0x17, 0x20, 5
-#define SR_CSMA_LBT_MODE	0x17, 0x40, 6
-#define SR_RESERVED_17_1	0x17, 0x80, 7
-#define RG_FTN_CTRL	(0x18)
-#define SR_RESERVED_18_2	0x18, 0x7f, 0
-#define SR_FTN_START		0x18, 0x80, 7
-#define RG_PLL_CF	(0x1a)
-#define SR_RESERVED_1a_2	0x1a, 0x7f, 0
-#define SR_PLL_CF_START		0x1a, 0x80, 7
-#define RG_PLL_DCU	(0x1b)
-#define SR_RESERVED_1b_3	0x1b, 0x3f, 0
-#define SR_RESERVED_1b_2	0x1b, 0x40, 6
-#define SR_PLL_DCU_START	0x1b, 0x80, 7
-#define RG_PART_NUM	(0x1c)
-#define SR_PART_NUM		0x1c, 0xff, 0
-#define RG_VERSION_NUM	(0x1d)
-#define SR_VERSION_NUM		0x1d, 0xff, 0
-#define RG_MAN_ID_0	(0x1e)
-#define SR_MAN_ID_0		0x1e, 0xff, 0
-#define RG_MAN_ID_1	(0x1f)
-#define SR_MAN_ID_1		0x1f, 0xff, 0
-#define RG_SHORT_ADDR_0	(0x20)
-#define SR_SHORT_ADDR_0		0x20, 0xff, 0
-#define RG_SHORT_ADDR_1	(0x21)
-#define SR_SHORT_ADDR_1		0x21, 0xff, 0
-#define RG_PAN_ID_0	(0x22)
-#define SR_PAN_ID_0		0x22, 0xff, 0
-#define RG_PAN_ID_1	(0x23)
-#define SR_PAN_ID_1		0x23, 0xff, 0
-#define RG_IEEE_ADDR_0	(0x24)
-#define SR_IEEE_ADDR_0		0x24, 0xff, 0
-#define RG_IEEE_ADDR_1	(0x25)
-#define SR_IEEE_ADDR_1		0x25, 0xff, 0
-#define RG_IEEE_ADDR_2	(0x26)
-#define SR_IEEE_ADDR_2		0x26, 0xff, 0
-#define RG_IEEE_ADDR_3	(0x27)
-#define SR_IEEE_ADDR_3		0x27, 0xff, 0
-#define RG_IEEE_ADDR_4	(0x28)
-#define SR_IEEE_ADDR_4		0x28, 0xff, 0
-#define RG_IEEE_ADDR_5	(0x29)
-#define SR_IEEE_ADDR_5		0x29, 0xff, 0
-#define RG_IEEE_ADDR_6	(0x2a)
-#define SR_IEEE_ADDR_6		0x2a, 0xff, 0
-#define RG_IEEE_ADDR_7	(0x2b)
-#define SR_IEEE_ADDR_7		0x2b, 0xff, 0
-#define RG_XAH_CTRL_0	(0x2c)
-#define SR_SLOTTED_OPERATION	0x2c, 0x01, 0
-#define SR_MAX_CSMA_RETRIES	0x2c, 0x0e, 1
-#define SR_MAX_FRAME_RETRIES	0x2c, 0xf0, 4
-#define RG_CSMA_SEED_0	(0x2d)
-#define SR_CSMA_SEED_0		0x2d, 0xff, 0
-#define RG_CSMA_SEED_1	(0x2e)
-#define SR_CSMA_SEED_1		0x2e, 0x07, 0
-#define SR_AACK_I_AM_COORD	0x2e, 0x08, 3
-#define SR_AACK_DIS_ACK		0x2e, 0x10, 4
-#define SR_AACK_SET_PD		0x2e, 0x20, 5
-#define SR_AACK_FVN_MODE	0x2e, 0xc0, 6
-#define RG_CSMA_BE	(0x2f)
-#define SR_MIN_BE		0x2f, 0x0f, 0
-#define SR_MAX_BE		0x2f, 0xf0, 4
-
-#define CMD_REG		0x80
-#define CMD_REG_MASK	0x3f
-#define CMD_WRITE	0x40
-#define CMD_FB		0x20
-
-#define IRQ_BAT_LOW	(1 << 7)
-#define IRQ_TRX_UR	(1 << 6)
-#define IRQ_AMI		(1 << 5)
-#define IRQ_CCA_ED	(1 << 4)
-#define IRQ_TRX_END	(1 << 3)
-#define IRQ_RX_START	(1 << 2)
-#define IRQ_PLL_UNL	(1 << 1)
-#define IRQ_PLL_LOCK	(1 << 0)
-
-#define IRQ_ACTIVE_HIGH	0
-#define IRQ_ACTIVE_LOW	1
-
-#define STATE_P_ON		0x00	/* BUSY */
-#define STATE_BUSY_RX		0x01
-#define STATE_BUSY_TX		0x02
-#define STATE_FORCE_TRX_OFF	0x03
-#define STATE_FORCE_TX_ON	0x04	/* IDLE */
-/* 0x05 */				/* INVALID_PARAMETER */
-#define STATE_RX_ON		0x06
-/* 0x07 */				/* SUCCESS */
-#define STATE_TRX_OFF		0x08
-#define STATE_TX_ON		0x09
-/* 0x0a - 0x0e */			/* 0x0a - UNSUPPORTED_ATTRIBUTE */
-#define STATE_SLEEP		0x0F
-#define STATE_PREP_DEEP_SLEEP	0x10
-#define STATE_BUSY_RX_AACK	0x11
-#define STATE_BUSY_TX_ARET	0x12
-#define STATE_RX_AACK_ON	0x16
-#define STATE_TX_ARET_ON	0x19
-#define STATE_RX_ON_NOCLK	0x1C
-#define STATE_RX_AACK_ON_NOCLK	0x1D
-#define STATE_BUSY_RX_AACK_NOCLK 0x1E
-#define STATE_TRANSITION_IN_PROGRESS 0x1F
-
-#define TRX_STATE_MASK		(0x1F)
-
 #define AT86RF2XX_NUMREGS 0x3F
 
 static void
@@ -304,18 +115,66 @@ at86rf230_async_state_change(struct at86rf230_local *lp,
 			     const u8 state, void (*complete)(void *context),
 			     const bool irq_enable);
 
+static inline void
+at86rf230_sleep(struct at86rf230_local *lp)
+{
+	if (gpio_is_valid(lp->slp_tr)) {
+		gpio_set_value(lp->slp_tr, 1);
+		usleep_range(lp->data->t_off_to_sleep,
+			     lp->data->t_off_to_sleep + 10);
+		lp->sleep = true;
+	}
+}
+
+static inline void
+at86rf230_awake(struct at86rf230_local *lp)
+{
+	if (gpio_is_valid(lp->slp_tr)) {
+		gpio_set_value(lp->slp_tr, 0);
+		usleep_range(lp->data->t_sleep_to_off,
+			     lp->data->t_sleep_to_off + 100);
+		lp->sleep = false;
+	}
+}
+
 static inline int
 __at86rf230_write(struct at86rf230_local *lp,
 		  unsigned int addr, unsigned int data)
 {
-	return regmap_write(lp->regmap, addr, data);
+	bool sleep = lp->sleep;
+	int ret;
+
+	/* awake for register setting if sleep */
+	if (sleep)
+		at86rf230_awake(lp);
+
+	ret = regmap_write(lp->regmap, addr, data);
+
+	/* sleep again if was sleeping */
+	if (sleep)
+		at86rf230_sleep(lp);
+
+	return ret;
 }
 
 static inline int
 __at86rf230_read(struct at86rf230_local *lp,
 		 unsigned int addr, unsigned int *data)
 {
-	return regmap_read(lp->regmap, addr, data);
+	bool sleep = lp->sleep;
+	int ret;
+
+	/* awake for register setting if sleep */
+	if (sleep)
+		at86rf230_awake(lp);
+
+	ret = regmap_read(lp->regmap, addr, data);
+
+	/* sleep again if was sleeping */
+	if (sleep)
+		at86rf230_sleep(lp);
+
+	return ret;
 }
 
 static inline int
@@ -337,7 +196,20 @@ at86rf230_write_subreg(struct at86rf230_local *lp,
 		       unsigned int addr, unsigned int mask,
 		       unsigned int shift, unsigned int data)
 {
-	return regmap_update_bits(lp->regmap, addr, mask, data << shift);
+	bool sleep = lp->sleep;
+	int ret;
+
+	/* awake for register setting if sleep */
+	if (sleep)
+		at86rf230_awake(lp);
+
+	ret = regmap_update_bits(lp->regmap, addr, mask, data << shift);
+
+	/* sleep again if was sleeping */
+	if (sleep)
+		at86rf230_sleep(lp);
+
+	return ret;
 }
 
 static inline void
@@ -1010,7 +882,7 @@ at86rf230_xmit_start(void *context)
 		if (lp->is_tx_from_off) {
 			lp->is_tx_from_off = false;
 			at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
-						     at86rf230_xmit_tx_on,
+						     at86rf230_write_frame,
 						     false);
 		} else {
 			at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
@@ -1061,13 +933,34 @@ at86rf230_ed(struct ieee802154_hw *hw, u8 *level)
 static int
 at86rf230_start(struct ieee802154_hw *hw)
 {
-	return at86rf230_sync_state_change(hw->priv, STATE_RX_AACK_ON);
+	struct at86rf230_local *lp = hw->priv;
+
+	at86rf230_awake(lp);
+	enable_irq(lp->spi->irq);
+
+	return at86rf230_sync_state_change(lp, STATE_RX_AACK_ON);
 }
 
 static void
 at86rf230_stop(struct ieee802154_hw *hw)
 {
-	at86rf230_sync_state_change(hw->priv, STATE_FORCE_TRX_OFF);
+	struct at86rf230_local *lp = hw->priv;
+	u8 csma_seed[2];
+
+	at86rf230_sync_state_change(lp, STATE_FORCE_TRX_OFF);
+
+	disable_irq(lp->spi->irq);
+
+	/* It's recommended to set random new csma_seeds before sleep state.
+	 * Makes only sense in the stop callback, not doing this inside of
+	 * at86rf230_sleep, this is also used when we don't transmit afterwards
+	 * when calling start callback again.
+	 */
+	get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
+	at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
+	at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
+
+	at86rf230_sleep(lp);
 }
 
 static int
@@ -1076,6 +969,50 @@ at86rf23x_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
 	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
 }
 
+#define AT86RF2XX_MAX_ED_LEVELS 0xF
+static const s32 at86rf23x_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300,
+	-7100, -6900, -6700, -6500, -6300, -6100,
+};
+
+static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200,
+	-8000, -7800, -7600, -7400, -7200, -7000,
+};
+
+static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000,
+	-7800, -7600, -7400, -7200, -7000, -6800,
+};
+
+static inline int
+at86rf212_update_cca_ed_level(struct at86rf230_local *lp, int rssi_base_val)
+{
+	unsigned int cca_ed_thres;
+	int rc;
+
+	rc = at86rf230_read_subreg(lp, SR_CCA_ED_THRES, &cca_ed_thres);
+	if (rc < 0)
+		return rc;
+
+	switch (rssi_base_val) {
+	case -98:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres];
+		break;
+	case -100:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres];
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	return 0;
+}
+
 static int
 at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
 {
@@ -1098,6 +1035,10 @@ at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
 	if (rc < 0)
 		return rc;
 
+	rc = at86rf212_update_cca_ed_level(lp, lp->data->rssi_base_val);
+	if (rc < 0)
+		return rc;
+
 	/* This sets the symbol_duration according frequency on the 212.
 	 * TODO move this handling while set channel and page in cfg802154.
 	 * We can do that, this timings are according 802.15.4 standard.
@@ -1193,23 +1134,56 @@ at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw,
 	return 0;
 }
 
+#define AT86RF23X_MAX_TX_POWERS 0xF
+static const s32 at86rf233_powers[AT86RF23X_MAX_TX_POWERS + 1] = {
+	400, 370, 340, 300, 250, 200, 100, 0, -100, -200, -300, -400, -600,
+	-800, -1200, -1700,
+};
+
+static const s32 at86rf231_powers[AT86RF23X_MAX_TX_POWERS + 1] = {
+	300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
+	-900, -1200, -1700,
+};
+
+#define AT86RF212_MAX_TX_POWERS 0x1F
+static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = {
+	500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
+	-800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
+	-1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
+};
+
 static int
-at86rf230_set_txpower(struct ieee802154_hw *hw, s8 db)
+at86rf23x_set_txpower(struct at86rf230_local *lp, s32 mbm)
 {
-	struct at86rf230_local *lp = hw->priv;
+	u32 i;
 
-	/* typical maximum output is 5dBm with RG_PHY_TX_PWR 0x60, lower five
-	 * bits decrease power in 1dB steps. 0x60 represents extra PA gain of
-	 * 0dB.
-	 * thus, supported values for db range from -26 to 5, for 31dB of
-	 * reduction to 0dB of reduction.
-	 */
-	if (db > 5 || db < -26)
-		return -EINVAL;
+	for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
+		if (lp->hw->phy->supported.tx_powers[i] == mbm)
+			return at86rf230_write_subreg(lp, SR_TX_PWR_23X, i);
+	}
+
+	return -EINVAL;
+}
+
+static int
+at86rf212_set_txpower(struct at86rf230_local *lp, s32 mbm)
+{
+	u32 i;
 
-	db = -(db - 5);
+	for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
+		if (lp->hw->phy->supported.tx_powers[i] == mbm)
+			return at86rf230_write_subreg(lp, SR_TX_PWR_212, i);
+	}
 
-	return __at86rf230_write(lp, RG_PHY_TX_PWR, 0x60 | db);
+	return -EINVAL;
+}
+
+static int
+at86rf230_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct at86rf230_local *lp = hw->priv;
+
+	return lp->data->set_txpower(lp, mbm);
 }
 
 static int
@@ -1254,28 +1228,19 @@ at86rf230_set_cca_mode(struct ieee802154_hw *hw,
 	return at86rf230_write_subreg(lp, SR_CCA_MODE, val);
 }
 
-static int
-at86rf212_get_desens_steps(struct at86rf230_local *lp, s32 level)
-{
-	return (level - lp->data->rssi_base_val) * 100 / 207;
-}
-
-static int
-at86rf23x_get_desens_steps(struct at86rf230_local *lp, s32 level)
-{
-	return (level - lp->data->rssi_base_val) / 2;
-}
 
 static int
-at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 level)
+at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
 {
 	struct at86rf230_local *lp = hw->priv;
+	u32 i;
 
-	if (level < lp->data->rssi_base_val || level > 30)
-		return -EINVAL;
+	for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) {
+		if (hw->phy->supported.cca_ed_levels[i] == mbm)
+			return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, i);
+	}
 
-	return at86rf230_write_subreg(lp, SR_CCA_ED_THRES,
-				      lp->data->get_desense_steps(lp, level));
+	return -EINVAL;
 }
 
 static int
@@ -1361,11 +1326,13 @@ static struct at86rf2xx_chip_data at86rf233_data = {
 	.t_reset_to_off = 26,
 	.t_off_to_aack = 80,
 	.t_off_to_tx_on = 80,
+	.t_off_to_sleep = 35,
+	.t_sleep_to_off = 210,
 	.t_frame = 4096,
 	.t_p_ack = 545,
 	.rssi_base_val = -91,
 	.set_channel = at86rf23x_set_channel,
-	.get_desense_steps = at86rf23x_get_desens_steps
+	.set_txpower = at86rf23x_set_txpower,
 };
 
 static struct at86rf2xx_chip_data at86rf231_data = {
@@ -1374,11 +1341,13 @@ static struct at86rf2xx_chip_data at86rf231_data = {
 	.t_reset_to_off = 37,
 	.t_off_to_aack = 110,
 	.t_off_to_tx_on = 110,
+	.t_off_to_sleep = 35,
+	.t_sleep_to_off = 380,
 	.t_frame = 4096,
 	.t_p_ack = 545,
 	.rssi_base_val = -91,
 	.set_channel = at86rf23x_set_channel,
-	.get_desense_steps = at86rf23x_get_desens_steps
+	.set_txpower = at86rf23x_set_txpower,
 };
 
 static struct at86rf2xx_chip_data at86rf212_data = {
@@ -1387,11 +1356,13 @@ static struct at86rf2xx_chip_data at86rf212_data = {
 	.t_reset_to_off = 26,
 	.t_off_to_aack = 200,
 	.t_off_to_tx_on = 200,
+	.t_off_to_sleep = 35,
+	.t_sleep_to_off = 380,
 	.t_frame = 4096,
 	.t_p_ack = 545,
 	.rssi_base_val = -100,
 	.set_channel = at86rf212_set_channel,
-	.get_desense_steps = at86rf212_get_desens_steps
+	.set_txpower = at86rf212_set_txpower,
 };
 
 static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim)
@@ -1563,9 +1534,22 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 		return -EINVAL;
 	}
 
-	lp->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AACK |
-			IEEE802154_HW_TXPOWER | IEEE802154_HW_ARET |
-			IEEE802154_HW_AFILT | IEEE802154_HW_PROMISCUOUS;
+	lp->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
+			IEEE802154_HW_CSMA_PARAMS |
+			IEEE802154_HW_FRAME_RETRIES | IEEE802154_HW_AFILT |
+			IEEE802154_HW_PROMISCUOUS;
+
+	lp->hw->phy->flags = WPAN_PHY_FLAG_TXPOWER |
+			     WPAN_PHY_FLAG_CCA_ED_LEVEL |
+			     WPAN_PHY_FLAG_CCA_MODE;
+
+	lp->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+		BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER);
+	lp->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+		BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
+
+	lp->hw->phy->supported.cca_ed_levels = at86rf23x_ed_levels;
+	lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf23x_ed_levels);
 
 	lp->hw->phy->cca.mode = NL802154_CCA_ENERGY;
 
@@ -1573,36 +1557,49 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 	case 2:
 		chip = "at86rf230";
 		rc = -ENOTSUPP;
-		break;
+		goto not_supp;
 	case 3:
 		chip = "at86rf231";
 		lp->data = &at86rf231_data;
-		lp->hw->phy->channels_supported[0] = 0x7FFF800;
+		lp->hw->phy->supported.channels[0] = 0x7FFF800;
 		lp->hw->phy->current_channel = 11;
 		lp->hw->phy->symbol_duration = 16;
+		lp->hw->phy->supported.tx_powers = at86rf231_powers;
+		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf231_powers);
 		break;
 	case 7:
 		chip = "at86rf212";
 		lp->data = &at86rf212_data;
 		lp->hw->flags |= IEEE802154_HW_LBT;
-		lp->hw->phy->channels_supported[0] = 0x00007FF;
-		lp->hw->phy->channels_supported[2] = 0x00007FF;
+		lp->hw->phy->supported.channels[0] = 0x00007FF;
+		lp->hw->phy->supported.channels[2] = 0x00007FF;
 		lp->hw->phy->current_channel = 5;
 		lp->hw->phy->symbol_duration = 25;
+		lp->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
+		lp->hw->phy->supported.tx_powers = at86rf212_powers;
+		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
 		break;
 	case 11:
 		chip = "at86rf233";
 		lp->data = &at86rf233_data;
-		lp->hw->phy->channels_supported[0] = 0x7FFF800;
+		lp->hw->phy->supported.channels[0] = 0x7FFF800;
 		lp->hw->phy->current_channel = 13;
 		lp->hw->phy->symbol_duration = 16;
+		lp->hw->phy->supported.tx_powers = at86rf233_powers;
+		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf233_powers);
 		break;
 	default:
 		chip = "unknown";
 		rc = -ENOTSUPP;
-		break;
+		goto not_supp;
 	}
 
+	lp->hw->phy->cca_ed_level = lp->hw->phy->supported.cca_ed_levels[7];
+	lp->hw->phy->transmit_power = lp->hw->phy->supported.tx_powers[0];
+
+not_supp:
 	dev_info(&lp->spi->dev, "Detected %s chip version %d\n", chip, version);
 
 	return rc;
@@ -1696,7 +1693,6 @@ static int at86rf230_probe(struct spi_device *spi)
 	lp->spi = spi;
 	lp->slp_tr = slp_tr;
 	hw->parent = &spi->dev;
-	hw->vif_data_size = sizeof(*lp);
 	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
 
 	lp->regmap = devm_regmap_init_spi(spi, &at86rf230_regmap_spi_config);
@@ -1728,13 +1724,19 @@ static int at86rf230_probe(struct spi_device *spi)
 
 	irq_type = irq_get_trigger_type(spi->irq);
 	if (!irq_type)
-		irq_type = IRQF_TRIGGER_RISING;
+		irq_type = IRQF_TRIGGER_HIGH;
 
 	rc = devm_request_irq(&spi->dev, spi->irq, at86rf230_isr,
 			      IRQF_SHARED | irq_type, dev_name(&spi->dev), lp);
 	if (rc)
 		goto free_dev;
 
+	/* disable_irq by default and wait for starting hardware */
+	disable_irq(spi->irq);
+
+	/* going into sleep by default */
+	at86rf230_sleep(lp);
+
 	rc = ieee802154_register_hw(lp->hw);
 	if (rc)
 		goto free_dev;
diff --git a/drivers/net/ieee802154/at86rf230.h b/drivers/net/ieee802154/at86rf230.h
new file mode 100644
index 000000000..1e6d1cc67
--- /dev/null
+++ b/drivers/net/ieee802154/at86rf230.h
@@ -0,0 +1,220 @@
+/*
+ * AT86RF230/RF231 driver
+ *
+ * Copyright (C) 2009-2012 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Written by:
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ * Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
+ */
+
+#ifndef _AT86RF230_H
+#define _AT86RF230_H
+
+#define RG_TRX_STATUS	(0x01)
+#define SR_TRX_STATUS		0x01, 0x1f, 0
+#define SR_RESERVED_01_3	0x01, 0x20, 5
+#define SR_CCA_STATUS		0x01, 0x40, 6
+#define SR_CCA_DONE		0x01, 0x80, 7
+#define RG_TRX_STATE	(0x02)
+#define SR_TRX_CMD		0x02, 0x1f, 0
+#define SR_TRAC_STATUS		0x02, 0xe0, 5
+#define RG_TRX_CTRL_0	(0x03)
+#define SR_CLKM_CTRL		0x03, 0x07, 0
+#define SR_CLKM_SHA_SEL		0x03, 0x08, 3
+#define SR_PAD_IO_CLKM		0x03, 0x30, 4
+#define SR_PAD_IO		0x03, 0xc0, 6
+#define RG_TRX_CTRL_1	(0x04)
+#define SR_IRQ_POLARITY		0x04, 0x01, 0
+#define SR_IRQ_MASK_MODE	0x04, 0x02, 1
+#define SR_SPI_CMD_MODE		0x04, 0x0c, 2
+#define SR_RX_BL_CTRL		0x04, 0x10, 4
+#define SR_TX_AUTO_CRC_ON	0x04, 0x20, 5
+#define SR_IRQ_2_EXT_EN		0x04, 0x40, 6
+#define SR_PA_EXT_EN		0x04, 0x80, 7
+#define RG_PHY_TX_PWR	(0x05)
+#define SR_TX_PWR_23X		0x05, 0x0f, 0
+#define SR_PA_LT_230		0x05, 0x30, 4
+#define SR_PA_BUF_LT_230	0x05, 0xc0, 6
+#define SR_TX_PWR_212		0x05, 0x1f, 0
+#define SR_GC_PA_212		0x05, 0x60, 5
+#define SR_PA_BOOST_LT_212	0x05, 0x80, 7
+#define RG_PHY_RSSI	(0x06)
+#define SR_RSSI			0x06, 0x1f, 0
+#define SR_RND_VALUE		0x06, 0x60, 5
+#define SR_RX_CRC_VALID		0x06, 0x80, 7
+#define RG_PHY_ED_LEVEL	(0x07)
+#define SR_ED_LEVEL		0x07, 0xff, 0
+#define RG_PHY_CC_CCA	(0x08)
+#define SR_CHANNEL		0x08, 0x1f, 0
+#define SR_CCA_MODE		0x08, 0x60, 5
+#define SR_CCA_REQUEST		0x08, 0x80, 7
+#define RG_CCA_THRES	(0x09)
+#define SR_CCA_ED_THRES		0x09, 0x0f, 0
+#define SR_RESERVED_09_1	0x09, 0xf0, 4
+#define RG_RX_CTRL	(0x0a)
+#define SR_PDT_THRES		0x0a, 0x0f, 0
+#define SR_RESERVED_0a_1	0x0a, 0xf0, 4
+#define RG_SFD_VALUE	(0x0b)
+#define SR_SFD_VALUE		0x0b, 0xff, 0
+#define RG_TRX_CTRL_2	(0x0c)
+#define SR_OQPSK_DATA_RATE	0x0c, 0x03, 0
+#define SR_SUB_MODE		0x0c, 0x04, 2
+#define SR_BPSK_QPSK		0x0c, 0x08, 3
+#define SR_OQPSK_SUB1_RC_EN	0x0c, 0x10, 4
+#define SR_RESERVED_0c_5	0x0c, 0x60, 5
+#define SR_RX_SAFE_MODE		0x0c, 0x80, 7
+#define RG_ANT_DIV	(0x0d)
+#define SR_ANT_CTRL		0x0d, 0x03, 0
+#define SR_ANT_EXT_SW_EN	0x0d, 0x04, 2
+#define SR_ANT_DIV_EN		0x0d, 0x08, 3
+#define SR_RESERVED_0d_2	0x0d, 0x70, 4
+#define SR_ANT_SEL		0x0d, 0x80, 7
+#define RG_IRQ_MASK	(0x0e)
+#define SR_IRQ_MASK		0x0e, 0xff, 0
+#define RG_IRQ_STATUS	(0x0f)
+#define SR_IRQ_0_PLL_LOCK	0x0f, 0x01, 0
+#define SR_IRQ_1_PLL_UNLOCK	0x0f, 0x02, 1
+#define SR_IRQ_2_RX_START	0x0f, 0x04, 2
+#define SR_IRQ_3_TRX_END	0x0f, 0x08, 3
+#define SR_IRQ_4_CCA_ED_DONE	0x0f, 0x10, 4
+#define SR_IRQ_5_AMI		0x0f, 0x20, 5
+#define SR_IRQ_6_TRX_UR		0x0f, 0x40, 6
+#define SR_IRQ_7_BAT_LOW	0x0f, 0x80, 7
+#define RG_VREG_CTRL	(0x10)
+#define SR_RESERVED_10_6	0x10, 0x03, 0
+#define SR_DVDD_OK		0x10, 0x04, 2
+#define SR_DVREG_EXT		0x10, 0x08, 3
+#define SR_RESERVED_10_3	0x10, 0x30, 4
+#define SR_AVDD_OK		0x10, 0x40, 6
+#define SR_AVREG_EXT		0x10, 0x80, 7
+#define RG_BATMON	(0x11)
+#define SR_BATMON_VTH		0x11, 0x0f, 0
+#define SR_BATMON_HR		0x11, 0x10, 4
+#define SR_BATMON_OK		0x11, 0x20, 5
+#define SR_RESERVED_11_1	0x11, 0xc0, 6
+#define RG_XOSC_CTRL	(0x12)
+#define SR_XTAL_TRIM		0x12, 0x0f, 0
+#define SR_XTAL_MODE		0x12, 0xf0, 4
+#define RG_RX_SYN	(0x15)
+#define SR_RX_PDT_LEVEL		0x15, 0x0f, 0
+#define SR_RESERVED_15_2	0x15, 0x70, 4
+#define SR_RX_PDT_DIS		0x15, 0x80, 7
+#define RG_XAH_CTRL_1	(0x17)
+#define SR_RESERVED_17_8	0x17, 0x01, 0
+#define SR_AACK_PROM_MODE	0x17, 0x02, 1
+#define SR_AACK_ACK_TIME	0x17, 0x04, 2
+#define SR_RESERVED_17_5	0x17, 0x08, 3
+#define SR_AACK_UPLD_RES_FT	0x17, 0x10, 4
+#define SR_AACK_FLTR_RES_FT	0x17, 0x20, 5
+#define SR_CSMA_LBT_MODE	0x17, 0x40, 6
+#define SR_RESERVED_17_1	0x17, 0x80, 7
+#define RG_FTN_CTRL	(0x18)
+#define SR_RESERVED_18_2	0x18, 0x7f, 0
+#define SR_FTN_START		0x18, 0x80, 7
+#define RG_PLL_CF	(0x1a)
+#define SR_RESERVED_1a_2	0x1a, 0x7f, 0
+#define SR_PLL_CF_START		0x1a, 0x80, 7
+#define RG_PLL_DCU	(0x1b)
+#define SR_RESERVED_1b_3	0x1b, 0x3f, 0
+#define SR_RESERVED_1b_2	0x1b, 0x40, 6
+#define SR_PLL_DCU_START	0x1b, 0x80, 7
+#define RG_PART_NUM	(0x1c)
+#define SR_PART_NUM		0x1c, 0xff, 0
+#define RG_VERSION_NUM	(0x1d)
+#define SR_VERSION_NUM		0x1d, 0xff, 0
+#define RG_MAN_ID_0	(0x1e)
+#define SR_MAN_ID_0		0x1e, 0xff, 0
+#define RG_MAN_ID_1	(0x1f)
+#define SR_MAN_ID_1		0x1f, 0xff, 0
+#define RG_SHORT_ADDR_0	(0x20)
+#define SR_SHORT_ADDR_0		0x20, 0xff, 0
+#define RG_SHORT_ADDR_1	(0x21)
+#define SR_SHORT_ADDR_1		0x21, 0xff, 0
+#define RG_PAN_ID_0	(0x22)
+#define SR_PAN_ID_0		0x22, 0xff, 0
+#define RG_PAN_ID_1	(0x23)
+#define SR_PAN_ID_1		0x23, 0xff, 0
+#define RG_IEEE_ADDR_0	(0x24)
+#define SR_IEEE_ADDR_0		0x24, 0xff, 0
+#define RG_IEEE_ADDR_1	(0x25)
+#define SR_IEEE_ADDR_1		0x25, 0xff, 0
+#define RG_IEEE_ADDR_2	(0x26)
+#define SR_IEEE_ADDR_2		0x26, 0xff, 0
+#define RG_IEEE_ADDR_3	(0x27)
+#define SR_IEEE_ADDR_3		0x27, 0xff, 0
+#define RG_IEEE_ADDR_4	(0x28)
+#define SR_IEEE_ADDR_4		0x28, 0xff, 0
+#define RG_IEEE_ADDR_5	(0x29)
+#define SR_IEEE_ADDR_5		0x29, 0xff, 0
+#define RG_IEEE_ADDR_6	(0x2a)
+#define SR_IEEE_ADDR_6		0x2a, 0xff, 0
+#define RG_IEEE_ADDR_7	(0x2b)
+#define SR_IEEE_ADDR_7		0x2b, 0xff, 0
+#define RG_XAH_CTRL_0	(0x2c)
+#define SR_SLOTTED_OPERATION	0x2c, 0x01, 0
+#define SR_MAX_CSMA_RETRIES	0x2c, 0x0e, 1
+#define SR_MAX_FRAME_RETRIES	0x2c, 0xf0, 4
+#define RG_CSMA_SEED_0	(0x2d)
+#define SR_CSMA_SEED_0		0x2d, 0xff, 0
+#define RG_CSMA_SEED_1	(0x2e)
+#define SR_CSMA_SEED_1		0x2e, 0x07, 0
+#define SR_AACK_I_AM_COORD	0x2e, 0x08, 3
+#define SR_AACK_DIS_ACK		0x2e, 0x10, 4
+#define SR_AACK_SET_PD		0x2e, 0x20, 5
+#define SR_AACK_FVN_MODE	0x2e, 0xc0, 6
+#define RG_CSMA_BE	(0x2f)
+#define SR_MIN_BE		0x2f, 0x0f, 0
+#define SR_MAX_BE		0x2f, 0xf0, 4
+
+#define CMD_REG		0x80
+#define CMD_REG_MASK	0x3f
+#define CMD_WRITE	0x40
+#define CMD_FB		0x20
+
+#define IRQ_BAT_LOW	BIT(7)
+#define IRQ_TRX_UR	BIT(6)
+#define IRQ_AMI		BIT(5)
+#define IRQ_CCA_ED	BIT(4)
+#define IRQ_TRX_END	BIT(3)
+#define IRQ_RX_START	BIT(2)
+#define IRQ_PLL_UNL	BIT(1)
+#define IRQ_PLL_LOCK	BIT(0)
+
+#define IRQ_ACTIVE_HIGH	0
+#define IRQ_ACTIVE_LOW	1
+
+#define STATE_P_ON		0x00	/* BUSY */
+#define STATE_BUSY_RX		0x01
+#define STATE_BUSY_TX		0x02
+#define STATE_FORCE_TRX_OFF	0x03
+#define STATE_FORCE_TX_ON	0x04	/* IDLE */
+/* 0x05 */				/* INVALID_PARAMETER */
+#define STATE_RX_ON		0x06
+/* 0x07 */				/* SUCCESS */
+#define STATE_TRX_OFF		0x08
+#define STATE_TX_ON		0x09
+/* 0x0a - 0x0e */			/* 0x0a - UNSUPPORTED_ATTRIBUTE */
+#define STATE_SLEEP		0x0F
+#define STATE_PREP_DEEP_SLEEP	0x10
+#define STATE_BUSY_RX_AACK	0x11
+#define STATE_BUSY_TX_ARET	0x12
+#define STATE_RX_AACK_ON	0x16
+#define STATE_TX_ARET_ON	0x19
+#define STATE_RX_ON_NOCLK	0x1C
+#define STATE_RX_AACK_ON_NOCLK	0x1D
+#define STATE_BUSY_RX_AACK_NOCLK 0x1E
+#define STATE_TRANSITION_IN_PROGRESS 0x1F
+
+#define TRX_STATE_MASK		(0x1F)
+
+#endif /* !_AT86RF230_H */
diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
new file mode 100644
index 000000000..80dfc725b
--- /dev/null
+++ b/drivers/net/ieee802154/atusb.c
@@ -0,0 +1,762 @@
+/*
+ * atusb.c - Driver for the ATUSB IEEE 802.15.4 dongle
+ *
+ * Written 2013 by Werner Almesberger <werner@almesberger.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2
+ *
+ * Based on at86rf230.c and spi_atusb.c.
+ * at86rf230.c is
+ * Copyright (C) 2009 Siemens AG
+ * Written by: Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com>
+ *
+ * spi_atusb.c is
+ * Copyright (c) 2011 Richard Sharpe <realrichardsharpe@gmail.com>
+ * Copyright (c) 2011 Stefan Schmidt <stefan@datenfreihafen.org>
+ * Copyright (c) 2011 Werner Almesberger <werner@almesberger.net>
+ *
+ * USB initialization is
+ * Copyright (c) 2013 Alexander Aring <alex.aring@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/usb.h>
+#include <linux/skbuff.h>
+
+#include <net/cfg802154.h>
+#include <net/mac802154.h>
+
+#include "at86rf230.h"
+#include "atusb.h"
+
+#define ATUSB_JEDEC_ATMEL	0x1f	/* JEDEC manufacturer ID */
+
+#define ATUSB_NUM_RX_URBS	4	/* allow for a bit of local latency */
+#define ATUSB_ALLOC_DELAY_MS	100	/* delay after failed allocation */
+#define ATUSB_TX_TIMEOUT_MS	200	/* on the air timeout */
+
+struct atusb {
+	struct ieee802154_hw *hw;
+	struct usb_device *usb_dev;
+	int shutdown;			/* non-zero if shutting down */
+	int err;			/* set by first error */
+
+	/* RX variables */
+	struct delayed_work work;	/* memory allocations */
+	struct usb_anchor idle_urbs;	/* URBs waiting to be submitted */
+	struct usb_anchor rx_urbs;	/* URBs waiting for reception */
+
+	/* TX variables */
+	struct usb_ctrlrequest tx_dr;
+	struct urb *tx_urb;
+	struct sk_buff *tx_skb;
+	uint8_t tx_ack_seq;		/* current TX ACK sequence number */
+};
+
+/* ----- USB commands without data ----------------------------------------- */
+
+/* To reduce the number of error checks in the code, we record the first error
+ * in atusb->err and reject all subsequent requests until the error is cleared.
+ */
+
+static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
+			     __u8 request, __u8 requesttype,
+			     __u16 value, __u16 index,
+			     void *data, __u16 size, int timeout)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	if (atusb->err)
+		return atusb->err;
+
+	ret = usb_control_msg(usb_dev, pipe, request, requesttype,
+			      value, index, data, size, timeout);
+	if (ret < 0) {
+		atusb->err = ret;
+		dev_err(&usb_dev->dev,
+			"atusb_control_msg: req 0x%02x val 0x%x idx 0x%x, error %d\n",
+			request, value, index, ret);
+	}
+	return ret;
+}
+
+static int atusb_command(struct atusb *atusb, uint8_t cmd, uint8_t arg)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+
+	dev_dbg(&usb_dev->dev, "atusb_command: cmd = 0x%x\n", cmd);
+	return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
+				 cmd, ATUSB_REQ_TO_DEV, arg, 0, NULL, 0, 1000);
+}
+
+static int atusb_write_reg(struct atusb *atusb, uint8_t reg, uint8_t value)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+
+	dev_dbg(&usb_dev->dev, "atusb_write_reg: 0x%02x <- 0x%02x\n",
+		reg, value);
+	return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
+				 ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				 value, reg, NULL, 0, 1000);
+}
+
+static int atusb_read_reg(struct atusb *atusb, uint8_t reg)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+	uint8_t value;
+
+	dev_dbg(&usb_dev->dev, "atusb: reg = 0x%x\n", reg);
+	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
+				ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				0, reg, &value, 1, 1000);
+	return ret >= 0 ? value : ret;
+}
+
+static int atusb_write_subreg(struct atusb *atusb, uint8_t reg, uint8_t mask,
+			      uint8_t shift, uint8_t value)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	uint8_t orig, tmp;
+	int ret = 0;
+
+	dev_dbg(&usb_dev->dev, "atusb_write_subreg: 0x%02x <- 0x%02x\n",
+		reg, value);
+
+	orig = atusb_read_reg(atusb, reg);
+
+	/* Write the value only into that part of the register which is allowed
+	 * by the mask. All other bits stay as before.
+	 */
+	tmp = orig & ~mask;
+	tmp |= (value << shift) & mask;
+
+	if (tmp != orig)
+		ret = atusb_write_reg(atusb, reg, tmp);
+
+	return ret;
+}
+
+static int atusb_get_and_clear_error(struct atusb *atusb)
+{
+	int err = atusb->err;
+
+	atusb->err = 0;
+	return err;
+}
+
+/* ----- skb allocation ---------------------------------------------------- */
+
+#define MAX_PSDU	127
+#define MAX_RX_XFER	(1 + MAX_PSDU + 2 + 1)	/* PHR+PSDU+CRC+LQI */
+
+#define SKB_ATUSB(skb)	(*(struct atusb **)(skb)->cb)
+
+static void atusb_in(struct urb *urb);
+
+static int atusb_submit_rx_urb(struct atusb *atusb, struct urb *urb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	struct sk_buff *skb = urb->context;
+	int ret;
+
+	if (!skb) {
+		skb = alloc_skb(MAX_RX_XFER, GFP_KERNEL);
+		if (!skb) {
+			dev_warn_ratelimited(&usb_dev->dev,
+					     "atusb_in: can't allocate skb\n");
+			return -ENOMEM;
+		}
+		skb_put(skb, MAX_RX_XFER);
+		SKB_ATUSB(skb) = atusb;
+	}
+
+	usb_fill_bulk_urb(urb, usb_dev, usb_rcvbulkpipe(usb_dev, 1),
+			  skb->data, MAX_RX_XFER, atusb_in, skb);
+	usb_anchor_urb(urb, &atusb->rx_urbs);
+
+	ret = usb_submit_urb(urb, GFP_KERNEL);
+	if (ret) {
+		usb_unanchor_urb(urb);
+		kfree_skb(skb);
+		urb->context = NULL;
+	}
+	return ret;
+}
+
+static void atusb_work_urbs(struct work_struct *work)
+{
+	struct atusb *atusb =
+	    container_of(to_delayed_work(work), struct atusb, work);
+	struct usb_device *usb_dev = atusb->usb_dev;
+	struct urb *urb;
+	int ret;
+
+	if (atusb->shutdown)
+		return;
+
+	do {
+		urb = usb_get_from_anchor(&atusb->idle_urbs);
+		if (!urb)
+			return;
+		ret = atusb_submit_rx_urb(atusb, urb);
+	} while (!ret);
+
+	usb_anchor_urb(urb, &atusb->idle_urbs);
+	dev_warn_ratelimited(&usb_dev->dev,
+			     "atusb_in: can't allocate/submit URB (%d)\n", ret);
+	schedule_delayed_work(&atusb->work,
+			      msecs_to_jiffies(ATUSB_ALLOC_DELAY_MS) + 1);
+}
+
+/* ----- Asynchronous USB -------------------------------------------------- */
+
+static void atusb_tx_done(struct atusb *atusb, uint8_t seq)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	uint8_t expect = atusb->tx_ack_seq;
+
+	dev_dbg(&usb_dev->dev, "atusb_tx_done (0x%02x/0x%02x)\n", seq, expect);
+	if (seq == expect) {
+		/* TODO check for ifs handling in firmware */
+		ieee802154_xmit_complete(atusb->hw, atusb->tx_skb, false);
+	} else {
+		/* TODO I experience this case when atusb has a tx complete
+		 * irq before probing, we should fix the firmware it's an
+		 * unlikely case now that seq == expect is then true, but can
+		 * happen and fail with a tx_skb = NULL;
+		 */
+		ieee802154_wake_queue(atusb->hw);
+		if (atusb->tx_skb)
+			dev_kfree_skb_irq(atusb->tx_skb);
+	}
+}
+
+static void atusb_in_good(struct urb *urb)
+{
+	struct usb_device *usb_dev = urb->dev;
+	struct sk_buff *skb = urb->context;
+	struct atusb *atusb = SKB_ATUSB(skb);
+	uint8_t len, lqi;
+
+	if (!urb->actual_length) {
+		dev_dbg(&usb_dev->dev, "atusb_in: zero-sized URB ?\n");
+		return;
+	}
+
+	len = *skb->data;
+
+	if (urb->actual_length == 1) {
+		atusb_tx_done(atusb, len);
+		return;
+	}
+
+	if (len + 1 > urb->actual_length - 1) {
+		dev_dbg(&usb_dev->dev, "atusb_in: frame len %d+1 > URB %u-1\n",
+			len, urb->actual_length);
+		return;
+	}
+
+	if (!ieee802154_is_valid_psdu_len(len)) {
+		dev_dbg(&usb_dev->dev, "atusb_in: frame corrupted\n");
+		return;
+	}
+
+	lqi = skb->data[len + 1];
+	dev_dbg(&usb_dev->dev, "atusb_in: rx len %d lqi 0x%02x\n", len, lqi);
+	skb_pull(skb, 1);	/* remove PHR */
+	skb_trim(skb, len);	/* get payload only */
+	ieee802154_rx_irqsafe(atusb->hw, skb, lqi);
+	urb->context = NULL;	/* skb is gone */
+}
+
+static void atusb_in(struct urb *urb)
+{
+	struct usb_device *usb_dev = urb->dev;
+	struct sk_buff *skb = urb->context;
+	struct atusb *atusb = SKB_ATUSB(skb);
+
+	dev_dbg(&usb_dev->dev, "atusb_in: status %d len %d\n",
+		urb->status, urb->actual_length);
+	if (urb->status) {
+		if (urb->status == -ENOENT) { /* being killed */
+			kfree_skb(skb);
+			urb->context = NULL;
+			return;
+		}
+		dev_dbg(&usb_dev->dev, "atusb_in: URB error %d\n", urb->status);
+	} else {
+		atusb_in_good(urb);
+	}
+
+	usb_anchor_urb(urb, &atusb->idle_urbs);
+	if (!atusb->shutdown)
+		schedule_delayed_work(&atusb->work, 0);
+}
+
+/* ----- URB allocation/deallocation --------------------------------------- */
+
+static void atusb_free_urbs(struct atusb *atusb)
+{
+	struct urb *urb;
+
+	while (1) {
+		urb = usb_get_from_anchor(&atusb->idle_urbs);
+		if (!urb)
+			break;
+		if (urb->context)
+			kfree_skb(urb->context);
+		usb_free_urb(urb);
+	}
+}
+
+static int atusb_alloc_urbs(struct atusb *atusb, int n)
+{
+	struct urb *urb;
+
+	while (n) {
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			atusb_free_urbs(atusb);
+			return -ENOMEM;
+		}
+		usb_anchor_urb(urb, &atusb->idle_urbs);
+		n--;
+	}
+	return 0;
+}
+
+/* ----- IEEE 802.15.4 interface operations -------------------------------- */
+
+static void atusb_xmit_complete(struct urb *urb)
+{
+	dev_dbg(&urb->dev->dev, "atusb_xmit urb completed");
+}
+
+static int atusb_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	dev_dbg(&usb_dev->dev, "atusb_xmit (%d)\n", skb->len);
+	atusb->tx_skb = skb;
+	atusb->tx_ack_seq++;
+	atusb->tx_dr.wIndex = cpu_to_le16(atusb->tx_ack_seq);
+	atusb->tx_dr.wLength = cpu_to_le16(skb->len);
+
+	usb_fill_control_urb(atusb->tx_urb, usb_dev,
+			     usb_sndctrlpipe(usb_dev, 0),
+			     (unsigned char *)&atusb->tx_dr, skb->data,
+			     skb->len, atusb_xmit_complete, NULL);
+	ret = usb_submit_urb(atusb->tx_urb, GFP_ATOMIC);
+	dev_dbg(&usb_dev->dev, "atusb_xmit done (%d)\n", ret);
+	return ret;
+}
+
+static int atusb_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct atusb *atusb = hw->priv;
+	int ret;
+
+	/* This implicitly sets the CCA (Clear Channel Assessment) mode to 0,
+	 * "Mode 3a, Carrier sense OR energy above threshold".
+	 * We should probably make this configurable. @@@
+	 */
+	ret = atusb_write_reg(atusb, RG_PHY_CC_CCA, channel);
+	if (ret < 0)
+		return ret;
+	msleep(1);	/* @@@ ugly synchronization */
+	return 0;
+}
+
+static int atusb_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	BUG_ON(!level);
+	*level = 0xbe;
+	return 0;
+}
+
+static int atusb_set_hw_addr_filt(struct ieee802154_hw *hw,
+				  struct ieee802154_hw_addr_filt *filt,
+				  unsigned long changed)
+{
+	struct atusb *atusb = hw->priv;
+	struct device *dev = &atusb->usb_dev->dev;
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		u16 addr = le16_to_cpu(filt->short_addr);
+
+		dev_vdbg(dev, "atusb_set_hw_addr_filt called for saddr\n");
+		atusb_write_reg(atusb, RG_SHORT_ADDR_0, addr);
+		atusb_write_reg(atusb, RG_SHORT_ADDR_1, addr >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		u16 pan = le16_to_cpu(filt->pan_id);
+
+		dev_vdbg(dev, "atusb_set_hw_addr_filt called for pan id\n");
+		atusb_write_reg(atusb, RG_PAN_ID_0, pan);
+		atusb_write_reg(atusb, RG_PAN_ID_1, pan >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		u8 i, addr[IEEE802154_EXTENDED_ADDR_LEN];
+
+		memcpy(addr, &filt->ieee_addr, IEEE802154_EXTENDED_ADDR_LEN);
+		dev_vdbg(dev, "atusb_set_hw_addr_filt called for IEEE addr\n");
+		for (i = 0; i < 8; i++)
+			atusb_write_reg(atusb, RG_IEEE_ADDR_0 + i, addr[i]);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		dev_vdbg(dev,
+			 "atusb_set_hw_addr_filt called for panc change\n");
+		if (filt->pan_coord)
+			atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 1);
+		else
+			atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 0);
+	}
+
+	return atusb_get_and_clear_error(atusb);
+}
+
+static int atusb_start(struct ieee802154_hw *hw)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	dev_dbg(&usb_dev->dev, "atusb_start\n");
+	schedule_delayed_work(&atusb->work, 0);
+	atusb_command(atusb, ATUSB_RX_MODE, 1);
+	ret = atusb_get_and_clear_error(atusb);
+	if (ret < 0)
+		usb_kill_anchored_urbs(&atusb->idle_urbs);
+	return ret;
+}
+
+static void atusb_stop(struct ieee802154_hw *hw)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+
+	dev_dbg(&usb_dev->dev, "atusb_stop\n");
+	usb_kill_anchored_urbs(&atusb->idle_urbs);
+	atusb_command(atusb, ATUSB_RX_MODE, 0);
+	atusb_get_and_clear_error(atusb);
+}
+
+#define ATUSB_MAX_TX_POWERS 0xF
+static const s32 atusb_powers[ATUSB_MAX_TX_POWERS + 1] = {
+	300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
+	-900, -1200, -1700,
+};
+
+static int
+atusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct atusb *atusb = hw->priv;
+	u32 i;
+
+	for (i = 0; i < hw->phy->supported.tx_powers_size; i++) {
+		if (hw->phy->supported.tx_powers[i] == mbm)
+			return atusb_write_subreg(atusb, SR_TX_PWR_23X, i);
+	}
+
+	return -EINVAL;
+}
+
+static int
+atusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+	struct atusb *atusb = hw->priv;
+	int ret;
+
+	if (on) {
+		ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 1);
+		if (ret < 0)
+			return ret;
+
+		ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 1);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 0);
+		if (ret < 0)
+			return ret;
+
+		ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct ieee802154_ops atusb_ops = {
+	.owner			= THIS_MODULE,
+	.xmit_async		= atusb_xmit,
+	.ed			= atusb_ed,
+	.set_channel		= atusb_channel,
+	.start			= atusb_start,
+	.stop			= atusb_stop,
+	.set_hw_addr_filt	= atusb_set_hw_addr_filt,
+	.set_txpower		= atusb_set_txpower,
+	.set_promiscuous_mode	= atusb_set_promiscuous_mode,
+};
+
+/* ----- Firmware and chip version information ----------------------------- */
+
+static int atusb_get_and_show_revision(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	unsigned char buffer[3];
+	int ret;
+
+	/* Get a couple of the ATMega Firmware values */
+	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
+				ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
+				buffer, 3, 1000);
+	if (ret >= 0)
+		dev_info(&usb_dev->dev,
+			 "Firmware: major: %u, minor: %u, hardware type: %u\n",
+			 buffer[0], buffer[1], buffer[2]);
+	if (buffer[0] == 0 && buffer[1] < 2) {
+		dev_info(&usb_dev->dev,
+			 "Firmware version (%u.%u) is predates our first public release.",
+			 buffer[0], buffer[1]);
+		dev_info(&usb_dev->dev, "Please update to version 0.2 or newer");
+	}
+
+	return ret;
+}
+
+static int atusb_get_and_show_build(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	char build[ATUSB_BUILD_SIZE + 1];
+	int ret;
+
+	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
+				ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0,
+				build, ATUSB_BUILD_SIZE, 1000);
+	if (ret >= 0) {
+		build[ret] = 0;
+		dev_info(&usb_dev->dev, "Firmware: build %s\n", build);
+	}
+
+	return ret;
+}
+
+static int atusb_get_and_show_chip(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	uint8_t man_id_0, man_id_1, part_num, version_num;
+
+	man_id_0 = atusb_read_reg(atusb, RG_MAN_ID_0);
+	man_id_1 = atusb_read_reg(atusb, RG_MAN_ID_1);
+	part_num = atusb_read_reg(atusb, RG_PART_NUM);
+	version_num = atusb_read_reg(atusb, RG_VERSION_NUM);
+
+	if (atusb->err)
+		return atusb->err;
+
+	if ((man_id_1 << 8 | man_id_0) != ATUSB_JEDEC_ATMEL) {
+		dev_err(&usb_dev->dev,
+			"non-Atmel transceiver xxxx%02x%02x\n",
+			man_id_1, man_id_0);
+		goto fail;
+	}
+	if (part_num != 3 && part_num != 2) {
+		dev_err(&usb_dev->dev,
+			"unexpected transceiver, part 0x%02x version 0x%02x\n",
+			part_num, version_num);
+		goto fail;
+	}
+
+	dev_info(&usb_dev->dev, "ATUSB: AT86RF231 version %d\n", version_num);
+
+	return 0;
+
+fail:
+	atusb->err = -ENODEV;
+	return -ENODEV;
+}
+
+/* ----- Setup ------------------------------------------------------------- */
+
+static int atusb_probe(struct usb_interface *interface,
+		       const struct usb_device_id *id)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(interface);
+	struct ieee802154_hw *hw;
+	struct atusb *atusb = NULL;
+	int ret = -ENOMEM;
+
+	hw = ieee802154_alloc_hw(sizeof(struct atusb), &atusb_ops);
+	if (!hw)
+		return -ENOMEM;
+
+	atusb = hw->priv;
+	atusb->hw = hw;
+	atusb->usb_dev = usb_get_dev(usb_dev);
+	usb_set_intfdata(interface, atusb);
+
+	atusb->shutdown = 0;
+	atusb->err = 0;
+	INIT_DELAYED_WORK(&atusb->work, atusb_work_urbs);
+	init_usb_anchor(&atusb->idle_urbs);
+	init_usb_anchor(&atusb->rx_urbs);
+
+	if (atusb_alloc_urbs(atusb, ATUSB_NUM_RX_URBS))
+		goto fail;
+
+	atusb->tx_dr.bRequestType = ATUSB_REQ_TO_DEV;
+	atusb->tx_dr.bRequest = ATUSB_TX;
+	atusb->tx_dr.wValue = cpu_to_le16(0);
+
+	atusb->tx_urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!atusb->tx_urb)
+		goto fail;
+
+	hw->parent = &usb_dev->dev;
+	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
+		    IEEE802154_HW_PROMISCUOUS;
+
+	hw->phy->flags = WPAN_PHY_FLAG_TXPOWER;
+
+	hw->phy->current_page = 0;
+	hw->phy->current_channel = 11;	/* reset default */
+	hw->phy->supported.channels[0] = 0x7FFF800;
+	hw->phy->supported.tx_powers = atusb_powers;
+	hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
+	hw->phy->transmit_power = hw->phy->supported.tx_powers[0];
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+
+	atusb_command(atusb, ATUSB_RF_RESET, 0);
+	atusb_get_and_show_chip(atusb);
+	atusb_get_and_show_revision(atusb);
+	atusb_get_and_show_build(atusb);
+	ret = atusb_get_and_clear_error(atusb);
+	if (ret) {
+		dev_err(&atusb->usb_dev->dev,
+			"%s: initialization failed, error = %d\n",
+			__func__, ret);
+		goto fail;
+	}
+
+	ret = ieee802154_register_hw(hw);
+	if (ret)
+		goto fail;
+
+	/* If we just powered on, we're now in P_ON and need to enter TRX_OFF
+	 * explicitly. Any resets after that will send us straight to TRX_OFF,
+	 * making the command below redundant.
+	 */
+	atusb_write_reg(atusb, RG_TRX_STATE, STATE_FORCE_TRX_OFF);
+	msleep(1);	/* reset => TRX_OFF, tTR13 = 37 us */
+
+#if 0
+	/* Calculating the maximum time available to empty the frame buffer
+	 * on reception:
+	 *
+	 * According to [1], the inter-frame gap is
+	 * R * 20 * 16 us + 128 us
+	 * where R is a random number from 0 to 7. Furthermore, we have 20 bit
+	 * times (80 us at 250 kbps) of SHR of the next frame before the
+	 * transceiver begins storing data in the frame buffer.
+	 *
+	 * This yields a minimum time of 208 us between the last data of a
+	 * frame and the first data of the next frame. This time is further
+	 * reduced by interrupt latency in the atusb firmware.
+	 *
+	 * atusb currently needs about 500 us to retrieve a maximum-sized
+	 * frame. We therefore have to allow reception of a new frame to begin
+	 * while we retrieve the previous frame.
+	 *
+	 * [1] "JN-AN-1035 Calculating data rates in an IEEE 802.15.4-based
+	 *      network", Jennic 2006.
+	 *     http://www.jennic.com/download_file.php?supportFile=JN-AN-1035%20Calculating%20802-15-4%20Data%20Rates-1v0.pdf
+	 */
+
+	atusb_write_subreg(atusb, SR_RX_SAFE_MODE, 1);
+#endif
+	atusb_write_reg(atusb, RG_IRQ_MASK, 0xff);
+
+	ret = atusb_get_and_clear_error(atusb);
+	if (!ret)
+		return 0;
+
+	dev_err(&atusb->usb_dev->dev,
+		"%s: setup failed, error = %d\n",
+		__func__, ret);
+
+	ieee802154_unregister_hw(hw);
+fail:
+	atusb_free_urbs(atusb);
+	usb_kill_urb(atusb->tx_urb);
+	usb_free_urb(atusb->tx_urb);
+	usb_put_dev(usb_dev);
+	ieee802154_free_hw(hw);
+	return ret;
+}
+
+static void atusb_disconnect(struct usb_interface *interface)
+{
+	struct atusb *atusb = usb_get_intfdata(interface);
+
+	dev_dbg(&atusb->usb_dev->dev, "atusb_disconnect\n");
+
+	atusb->shutdown = 1;
+	cancel_delayed_work_sync(&atusb->work);
+
+	usb_kill_anchored_urbs(&atusb->rx_urbs);
+	atusb_free_urbs(atusb);
+	usb_kill_urb(atusb->tx_urb);
+	usb_free_urb(atusb->tx_urb);
+
+	ieee802154_unregister_hw(atusb->hw);
+
+	ieee802154_free_hw(atusb->hw);
+
+	usb_set_intfdata(interface, NULL);
+	usb_put_dev(atusb->usb_dev);
+
+	pr_debug("atusb_disconnect done\n");
+}
+
+/* The devices we work with */
+static const struct usb_device_id atusb_device_table[] = {
+	{
+		.match_flags		= USB_DEVICE_ID_MATCH_DEVICE |
+					  USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor		= ATUSB_VENDOR_ID,
+		.idProduct		= ATUSB_PRODUCT_ID,
+		.bInterfaceClass	= USB_CLASS_VENDOR_SPEC
+	},
+	/* end with null element */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, atusb_device_table);
+
+static struct usb_driver atusb_driver = {
+	.name		= "atusb",
+	.probe		= atusb_probe,
+	.disconnect	= atusb_disconnect,
+	.id_table	= atusb_device_table,
+};
+module_usb_driver(atusb_driver);
+
+MODULE_AUTHOR("Alexander Aring <alex.aring@gmail.com>");
+MODULE_AUTHOR("Richard Sharpe <realrichardsharpe@gmail.com>");
+MODULE_AUTHOR("Stefan Schmidt <stefan@datenfreihafen.org>");
+MODULE_AUTHOR("Werner Almesberger <werner@almesberger.net>");
+MODULE_DESCRIPTION("ATUSB IEEE 802.15.4 Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ieee802154/atusb.h b/drivers/net/ieee802154/atusb.h
new file mode 100644
index 000000000..0690edcad
--- /dev/null
+++ b/drivers/net/ieee802154/atusb.h
@@ -0,0 +1,84 @@
+/*
+ * atusb.h - Definitions shared between kernel and ATUSB firmware
+ *
+ * Written 2013 by Werner Almesberger <werner@almesberger.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2, or
+ * (at your option) any later version.
+ *
+ * This file should be identical for kernel and firmware.
+ * Kernel: drivers/net/ieee802154/atusb.h
+ * Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h
+ */
+
+#ifndef _ATUSB_H
+#define _ATUSB_H
+
+#define ATUSB_VENDOR_ID	0x20b7	/* Qi Hardware*/
+#define ATUSB_PRODUCT_ID 0x1540	/* 802.15.4, device 0 */
+				/*     -- -         - */
+
+#define ATUSB_BUILD_SIZE 256	/* maximum build version/date message length */
+
+/* Commands to our device. Make sure this is synced with the firmware */
+enum atusb_requests {
+	ATUSB_ID			= 0x00,	/* system status/control grp */
+	ATUSB_BUILD,
+	ATUSB_RESET,
+	ATUSB_RF_RESET			= 0x10,	/* debug/test group */
+	ATUSB_POLL_INT,
+	ATUSB_TEST,			/* atusb-sil only */
+	ATUSB_TIMER,
+	ATUSB_GPIO,
+	ATUSB_SLP_TR,
+	ATUSB_GPIO_CLEANUP,
+	ATUSB_REG_WRITE			= 0x20,	/* transceiver group */
+	ATUSB_REG_READ,
+	ATUSB_BUF_WRITE,
+	ATUSB_BUF_READ,
+	ATUSB_SRAM_WRITE,
+	ATUSB_SRAM_READ,
+	ATUSB_SPI_WRITE			= 0x30,	/* SPI group */
+	ATUSB_SPI_READ1,
+	ATUSB_SPI_READ2,
+	ATUSB_SPI_WRITE2_SYNC,
+	ATUSB_RX_MODE			= 0x40, /* HardMAC group */
+	ATUSB_TX,
+};
+
+/* Direction	bRequest		wValue		wIndex	wLength
+ *
+ * ->host	ATUSB_ID		-		-	3
+ * ->host	ATUSB_BUILD		-		-	#bytes
+ * host->	ATUSB_RESET		-		-	0
+ *
+ * host->	ATUSB_RF_RESET		-		-	0
+ * ->host	ATUSB_POLL_INT		-		-	1
+ * host->	ATUSB_TEST		-		-	0
+ * ->host	ATUSB_TIMER		-		-	#bytes (6)
+ * ->host	ATUSB_GPIO		dir+data	mask+p#	3
+ * host->	ATUSB_SLP_TR		-		-	0
+ * host->	ATUSB_GPIO_CLEANUP	-		-	0
+ *
+ * host->	ATUSB_REG_WRITE		value		addr	0
+ * ->host	ATUSB_REG_READ		-		addr	1
+ * host->	ATUSB_BUF_WRITE		-		-	#bytes
+ * ->host	ATUSB_BUF_READ		-		-	#bytes
+ * host->	ATUSB_SRAM_WRITE	-		addr	#bytes
+ * ->host	ATUSB_SRAM_READ		-		addr	#bytes
+ *
+ * host->	ATUSB_SPI_WRITE		byte0		byte1	#bytes
+ * ->host	ATUSB_SPI_READ1		byte0		-	#bytes
+ * ->host	ATUSB_SPI_READ2		byte0		byte1	#bytes
+ * ->host	ATUSB_SPI_WRITE2_SYNC	byte0		byte1	0/1
+ *
+ * host->	ATUSB_RX_MODE		on		-	0
+ * host->	ATUSB_TX		flags		ack_seq	#bytes
+ */
+
+#define ATUSB_REQ_FROM_DEV	(USB_TYPE_VENDOR | USB_DIR_IN)
+#define ATUSB_REQ_TO_DEV	(USB_TYPE_VENDOR | USB_DIR_OUT)
+
+#endif /* !_ATUSB_H */
diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
index f833b8bb6..b6fc29579 100644
--- a/drivers/net/ieee802154/cc2520.c
+++ b/drivers/net/ieee802154/cc2520.c
@@ -196,6 +196,7 @@ struct cc2520_private {
 	u8 *buf;			/* SPI TX/Rx data buffer */
 	struct mutex buffer_mutex;	/* SPI buffer mutex */
 	bool is_tx;			/* Flag for sync b/w Tx and Rx */
+	bool amplified;			/* Flag for CC2591 */
 	int fifo_pin;			/* FIFO GPIO pin number */
 	struct work_struct fifop_irqwork;/* Workqueue for FIFOP */
 	spinlock_t lock;		/* Lock for is_tx*/
@@ -589,22 +590,23 @@ cc2520_filter(struct ieee802154_hw *hw,
 	      struct ieee802154_hw_addr_filt *filt, unsigned long changed)
 {
 	struct cc2520_private *priv = hw->priv;
+	int ret = 0;
 
 	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
 		u16 panid = le16_to_cpu(filt->pan_id);
 
 		dev_vdbg(&priv->spi->dev,
 			 "cc2520_filter called for pan id\n");
-		cc2520_write_ram(priv, CC2520RAM_PANID,
-				 sizeof(panid), (u8 *)&panid);
+		ret = cc2520_write_ram(priv, CC2520RAM_PANID,
+				       sizeof(panid), (u8 *)&panid);
 	}
 
 	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
 		dev_vdbg(&priv->spi->dev,
 			 "cc2520_filter called for IEEE addr\n");
-		cc2520_write_ram(priv, CC2520RAM_IEEEADDR,
-				 sizeof(filt->ieee_addr),
-				 (u8 *)&filt->ieee_addr);
+		ret = cc2520_write_ram(priv, CC2520RAM_IEEEADDR,
+				       sizeof(filt->ieee_addr),
+				       (u8 *)&filt->ieee_addr);
 	}
 
 	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
@@ -612,20 +614,113 @@ cc2520_filter(struct ieee802154_hw *hw,
 
 		dev_vdbg(&priv->spi->dev,
 			 "cc2520_filter called for saddr\n");
-		cc2520_write_ram(priv, CC2520RAM_SHORTADDR,
-				 sizeof(addr), (u8 *)&addr);
+		ret = cc2520_write_ram(priv, CC2520RAM_SHORTADDR,
+				       sizeof(addr), (u8 *)&addr);
 	}
 
 	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
 		dev_vdbg(&priv->spi->dev,
 			 "cc2520_filter called for panc change\n");
 		if (filt->pan_coord)
-			cc2520_write_register(priv, CC2520_FRMFILT0, 0x02);
+			ret = cc2520_write_register(priv, CC2520_FRMFILT0,
+						    0x02);
 		else
-			cc2520_write_register(priv, CC2520_FRMFILT0, 0x00);
+			ret = cc2520_write_register(priv, CC2520_FRMFILT0,
+						    0x00);
 	}
 
-	return 0;
+	return ret;
+}
+
+static inline int cc2520_set_tx_power(struct cc2520_private *priv, s32 mbm)
+{
+	u8 power;
+
+	switch (mbm) {
+	case 500:
+		power = 0xF7;
+		break;
+	case 300:
+		power = 0xF2;
+		break;
+	case 200:
+		power = 0xAB;
+		break;
+	case 100:
+		power = 0x13;
+		break;
+	case 0:
+		power = 0x32;
+		break;
+	case -200:
+		power = 0x81;
+		break;
+	case -400:
+		power = 0x88;
+		break;
+	case -700:
+		power = 0x2C;
+		break;
+	case -1800:
+		power = 0x03;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return cc2520_write_register(priv, CC2520_TXPOWER, power);
+}
+
+static inline int cc2520_cc2591_set_tx_power(struct cc2520_private *priv,
+					     s32 mbm)
+{
+	u8 power;
+
+	switch (mbm) {
+	case 1700:
+		power = 0xF9;
+		break;
+	case 1600:
+		power = 0xF0;
+		break;
+	case 1400:
+		power = 0xA0;
+		break;
+	case 1100:
+		power = 0x2C;
+		break;
+	case -100:
+		power = 0x03;
+		break;
+	case -800:
+		power = 0x01;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return cc2520_write_register(priv, CC2520_TXPOWER, power);
+}
+
+#define CC2520_MAX_TX_POWERS 0x8
+static const s32 cc2520_powers[CC2520_MAX_TX_POWERS + 1] = {
+	500, 300, 200, 100, 0, -200, -400, -700, -1800,
+};
+
+#define CC2520_CC2591_MAX_TX_POWERS 0x5
+static const s32 cc2520_cc2591_powers[CC2520_CC2591_MAX_TX_POWERS + 1] = {
+	1700, 1600, 1400, 1100, -100, -800,
+};
+
+static int
+cc2520_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct cc2520_private *priv = hw->priv;
+
+	if (!priv->amplified)
+		return cc2520_set_tx_power(priv, mbm);
+
+	return cc2520_cc2591_set_tx_power(priv, mbm);
 }
 
 static const struct ieee802154_ops cc2520_ops = {
@@ -636,6 +731,7 @@ static const struct ieee802154_ops cc2520_ops = {
 	.ed = cc2520_ed,
 	.set_channel = cc2520_set_channel,
 	.set_hw_addr_filt = cc2520_filter,
+	.set_txpower = cc2520_set_txpower,
 };
 
 static int cc2520_register(struct cc2520_private *priv)
@@ -649,13 +745,25 @@ static int cc2520_register(struct cc2520_private *priv)
 	priv->hw->priv = priv;
 	priv->hw->parent = &priv->spi->dev;
 	priv->hw->extra_tx_headroom = 0;
-	priv->hw->vif_data_size = sizeof(*priv);
 	ieee802154_random_extended_addr(&priv->hw->phy->perm_extended_addr);
 
 	/* We do support only 2.4 Ghz */
-	priv->hw->phy->channels_supported[0] = 0x7FFF800;
-	priv->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
-			  IEEE802154_HW_AFILT;
+	priv->hw->phy->supported.channels[0] = 0x7FFF800;
+	priv->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AFILT;
+
+	priv->hw->phy->flags = WPAN_PHY_FLAG_TXPOWER;
+
+	if (!priv->amplified) {
+		priv->hw->phy->supported.tx_powers = cc2520_powers;
+		priv->hw->phy->supported.tx_powers_size = ARRAY_SIZE(cc2520_powers);
+		priv->hw->phy->transmit_power = priv->hw->phy->supported.tx_powers[4];
+	} else {
+		priv->hw->phy->supported.tx_powers = cc2520_cc2591_powers;
+		priv->hw->phy->supported.tx_powers_size = ARRAY_SIZE(cc2520_cc2591_powers);
+		priv->hw->phy->transmit_power = priv->hw->phy->supported.tx_powers[0];
+	}
+
+	priv->hw->phy->current_channel = 11;
 
 	dev_vdbg(&priv->spi->dev, "registered cc2520\n");
 	ret = ieee802154_register_hw(priv->hw);
@@ -738,7 +846,9 @@ static int cc2520_get_platform_data(struct spi_device *spi,
 	pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0);
 	pdata->reset = of_get_named_gpio(np, "reset-gpio", 0);
 
-	pdata->amplified = of_property_read_bool(np, "amplified");
+	/* CC2591 front end for CC2520 */
+	if (of_property_read_bool(np, "amplified"))
+		priv->amplified = true;
 
 	return 0;
 }
@@ -781,11 +891,7 @@ static int cc2520_hw_init(struct cc2520_private *priv)
 	 * amplifier. See section 8 page 17 of TI application note AN065.
 	 * http://www.ti.com/lit/an/swra229a/swra229a.pdf
 	 */
-	if (pdata.amplified) {
-		ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF9);
-		if (ret)
-			goto err_ret;
-
+	if (priv->amplified) {
 		ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x16);
 		if (ret)
 			goto err_ret;
@@ -806,10 +912,6 @@ static int cc2520_hw_init(struct cc2520_private *priv)
 		if (ret)
 			goto err_ret;
 	} else {
-		ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF7);
-		if (ret)
-			goto err_ret;
-
 		ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11);
 		if (ret)
 			goto err_ret;
@@ -904,6 +1006,9 @@ static int cc2520_probe(struct spi_device *spi)
 	spin_lock_init(&priv->lock);
 	init_completion(&priv->tx_complete);
 
+	/* Assumption that CC2591 is not connected */
+	priv->amplified = false;
+
 	/* Request all the gpio's */
 	if (!gpio_is_valid(pdata.fifo)) {
 		dev_err(&spi->dev, "fifo gpio is not valid\n");
diff --git a/drivers/net/ieee802154/fakelb.c b/drivers/net/ieee802154/fakelb.c
index dc2bfb600..860d4aed8 100644
--- a/drivers/net/ieee802154/fakelb.c
+++ b/drivers/net/ieee802154/fakelb.c
@@ -27,25 +27,27 @@
 #include <net/mac802154.h>
 #include <net/cfg802154.h>
 
-static int numlbs = 1;
+static int numlbs = 2;
 
-struct fakelb_dev_priv {
+static LIST_HEAD(fakelb_phys);
+static DEFINE_SPINLOCK(fakelb_phys_lock);
+
+static LIST_HEAD(fakelb_ifup_phys);
+static DEFINE_RWLOCK(fakelb_ifup_phys_lock);
+
+struct fakelb_phy {
 	struct ieee802154_hw *hw;
 
-	struct list_head list;
-	struct fakelb_priv *fake;
+	u8 page;
+	u8 channel;
 
-	spinlock_t lock;
-	bool working;
-};
+	bool suspended;
 
-struct fakelb_priv {
 	struct list_head list;
-	rwlock_t lock;
+	struct list_head list_ifup;
 };
 
-static int
-fakelb_hw_ed(struct ieee802154_hw *hw, u8 *level)
+static int fakelb_hw_ed(struct ieee802154_hw *hw, u8 *level)
 {
 	BUG_ON(!level);
 	*level = 0xbe;
@@ -53,78 +55,66 @@ fakelb_hw_ed(struct ieee802154_hw *hw, u8 *level)
 	return 0;
 }
 
-static int
-fakelb_hw_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+static int fakelb_hw_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
 {
-	pr_debug("set channel to %d\n", channel);
+	struct fakelb_phy *phy = hw->priv;
 
+	write_lock_bh(&fakelb_ifup_phys_lock);
+	phy->page = page;
+	phy->channel = channel;
+	write_unlock_bh(&fakelb_ifup_phys_lock);
 	return 0;
 }
 
-static void
-fakelb_hw_deliver(struct fakelb_dev_priv *priv, struct sk_buff *skb)
+static int fakelb_hw_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
 {
-	struct sk_buff *newskb;
+	struct fakelb_phy *current_phy = hw->priv, *phy;
 
-	spin_lock(&priv->lock);
-	if (priv->working) {
-		newskb = pskb_copy(skb, GFP_ATOMIC);
-		ieee802154_rx_irqsafe(priv->hw, newskb, 0xcc);
-	}
-	spin_unlock(&priv->lock);
-}
+	read_lock_bh(&fakelb_ifup_phys_lock);
+	WARN_ON(current_phy->suspended);
+	list_for_each_entry(phy, &fakelb_ifup_phys, list_ifup) {
+		if (current_phy == phy)
+			continue;
 
-static int
-fakelb_hw_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
-{
-	struct fakelb_dev_priv *priv = hw->priv;
-	struct fakelb_priv *fake = priv->fake;
-
-	read_lock_bh(&fake->lock);
-	if (priv->list.next == priv->list.prev) {
-		/* we are the only one device */
-		fakelb_hw_deliver(priv, skb);
-	} else {
-		struct fakelb_dev_priv *dp;
-		list_for_each_entry(dp, &priv->fake->list, list) {
-			if (dp != priv &&
-			    (dp->hw->phy->current_channel ==
-			     priv->hw->phy->current_channel))
-				fakelb_hw_deliver(dp, skb);
+		if (current_phy->page == phy->page &&
+		    current_phy->channel == phy->channel) {
+			struct sk_buff *newskb = pskb_copy(skb, GFP_ATOMIC);
+
+			if (newskb)
+				ieee802154_rx_irqsafe(phy->hw, newskb, 0xcc);
 		}
 	}
-	read_unlock_bh(&fake->lock);
+	read_unlock_bh(&fakelb_ifup_phys_lock);
 
+	ieee802154_xmit_complete(hw, skb, false);
 	return 0;
 }
 
-static int
-fakelb_hw_start(struct ieee802154_hw *hw) {
-	struct fakelb_dev_priv *priv = hw->priv;
-	int ret = 0;
+static int fakelb_hw_start(struct ieee802154_hw *hw)
+{
+	struct fakelb_phy *phy = hw->priv;
 
-	spin_lock(&priv->lock);
-	if (priv->working)
-		ret = -EBUSY;
-	else
-		priv->working = 1;
-	spin_unlock(&priv->lock);
+	write_lock_bh(&fakelb_ifup_phys_lock);
+	phy->suspended = false;
+	list_add(&phy->list_ifup, &fakelb_ifup_phys);
+	write_unlock_bh(&fakelb_ifup_phys_lock);
 
-	return ret;
+	return 0;
 }
 
-static void
-fakelb_hw_stop(struct ieee802154_hw *hw) {
-	struct fakelb_dev_priv *priv = hw->priv;
+static void fakelb_hw_stop(struct ieee802154_hw *hw)
+{
+	struct fakelb_phy *phy = hw->priv;
 
-	spin_lock(&priv->lock);
-	priv->working = 0;
-	spin_unlock(&priv->lock);
+	write_lock_bh(&fakelb_ifup_phys_lock);
+	phy->suspended = true;
+	list_del(&phy->list_ifup);
+	write_unlock_bh(&fakelb_ifup_phys_lock);
 }
 
 static const struct ieee802154_ops fakelb_ops = {
 	.owner = THIS_MODULE,
-	.xmit_sync = fakelb_hw_xmit,
+	.xmit_async = fakelb_hw_xmit,
 	.ed = fakelb_hw_ed,
 	.set_channel = fakelb_hw_channel,
 	.start = fakelb_hw_start,
@@ -135,54 +125,54 @@ static const struct ieee802154_ops fakelb_ops = {
 module_param(numlbs, int, 0);
 MODULE_PARM_DESC(numlbs, " number of pseudo devices");
 
-static int fakelb_add_one(struct device *dev, struct fakelb_priv *fake)
+static int fakelb_add_one(struct device *dev)
 {
-	struct fakelb_dev_priv *priv;
-	int err;
 	struct ieee802154_hw *hw;
+	struct fakelb_phy *phy;
+	int err;
 
-	hw = ieee802154_alloc_hw(sizeof(*priv), &fakelb_ops);
+	hw = ieee802154_alloc_hw(sizeof(*phy), &fakelb_ops);
 	if (!hw)
 		return -ENOMEM;
 
-	priv = hw->priv;
-	priv->hw = hw;
+	phy = hw->priv;
+	phy->hw = hw;
 
 	/* 868 MHz BPSK	802.15.4-2003 */
-	hw->phy->channels_supported[0] |= 1;
+	hw->phy->supported.channels[0] |= 1;
 	/* 915 MHz BPSK	802.15.4-2003 */
-	hw->phy->channels_supported[0] |= 0x7fe;
+	hw->phy->supported.channels[0] |= 0x7fe;
 	/* 2.4 GHz O-QPSK 802.15.4-2003 */
-	hw->phy->channels_supported[0] |= 0x7FFF800;
+	hw->phy->supported.channels[0] |= 0x7FFF800;
 	/* 868 MHz ASK 802.15.4-2006 */
-	hw->phy->channels_supported[1] |= 1;
+	hw->phy->supported.channels[1] |= 1;
 	/* 915 MHz ASK 802.15.4-2006 */
-	hw->phy->channels_supported[1] |= 0x7fe;
+	hw->phy->supported.channels[1] |= 0x7fe;
 	/* 868 MHz O-QPSK 802.15.4-2006 */
-	hw->phy->channels_supported[2] |= 1;
+	hw->phy->supported.channels[2] |= 1;
 	/* 915 MHz O-QPSK 802.15.4-2006 */
-	hw->phy->channels_supported[2] |= 0x7fe;
+	hw->phy->supported.channels[2] |= 0x7fe;
 	/* 2.4 GHz CSS 802.15.4a-2007 */
-	hw->phy->channels_supported[3] |= 0x3fff;
+	hw->phy->supported.channels[3] |= 0x3fff;
 	/* UWB Sub-gigahertz 802.15.4a-2007 */
-	hw->phy->channels_supported[4] |= 1;
+	hw->phy->supported.channels[4] |= 1;
 	/* UWB Low band 802.15.4a-2007 */
-	hw->phy->channels_supported[4] |= 0x1e;
+	hw->phy->supported.channels[4] |= 0x1e;
 	/* UWB High band 802.15.4a-2007 */
-	hw->phy->channels_supported[4] |= 0xffe0;
+	hw->phy->supported.channels[4] |= 0xffe0;
 	/* 750 MHz O-QPSK 802.15.4c-2009 */
-	hw->phy->channels_supported[5] |= 0xf;
+	hw->phy->supported.channels[5] |= 0xf;
 	/* 750 MHz MPSK 802.15.4c-2009 */
-	hw->phy->channels_supported[5] |= 0xf0;
+	hw->phy->supported.channels[5] |= 0xf0;
 	/* 950 MHz BPSK 802.15.4d-2009 */
-	hw->phy->channels_supported[6] |= 0x3ff;
+	hw->phy->supported.channels[6] |= 0x3ff;
 	/* 950 MHz GFSK 802.15.4d-2009 */
-	hw->phy->channels_supported[6] |= 0x3ffc00;
+	hw->phy->supported.channels[6] |= 0x3ffc00;
 
-	INIT_LIST_HEAD(&priv->list);
-	priv->fake = fake;
-
-	spin_lock_init(&priv->lock);
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+	/* fake phy channel 13 as default */
+	hw->phy->current_channel = 13;
+	phy->channel = hw->phy->current_channel;
 
 	hw->parent = dev;
 
@@ -190,67 +180,55 @@ static int fakelb_add_one(struct device *dev, struct fakelb_priv *fake)
 	if (err)
 		goto err_reg;
 
-	write_lock_bh(&fake->lock);
-	list_add_tail(&priv->list, &fake->list);
-	write_unlock_bh(&fake->lock);
+	spin_lock(&fakelb_phys_lock);
+	list_add_tail(&phy->list, &fakelb_phys);
+	spin_unlock(&fakelb_phys_lock);
 
 	return 0;
 
 err_reg:
-	ieee802154_free_hw(priv->hw);
+	ieee802154_free_hw(phy->hw);
 	return err;
 }
 
-static void fakelb_del(struct fakelb_dev_priv *priv)
+static void fakelb_del(struct fakelb_phy *phy)
 {
-	write_lock_bh(&priv->fake->lock);
-	list_del(&priv->list);
-	write_unlock_bh(&priv->fake->lock);
+	list_del(&phy->list);
 
-	ieee802154_unregister_hw(priv->hw);
-	ieee802154_free_hw(priv->hw);
+	ieee802154_unregister_hw(phy->hw);
+	ieee802154_free_hw(phy->hw);
 }
 
 static int fakelb_probe(struct platform_device *pdev)
 {
-	struct fakelb_priv *priv;
-	struct fakelb_dev_priv *dp;
-	int err = -ENOMEM;
-	int i;
-
-	priv = devm_kzalloc(&pdev->dev, sizeof(struct fakelb_priv),
-			    GFP_KERNEL);
-	if (!priv)
-		goto err_alloc;
-
-	INIT_LIST_HEAD(&priv->list);
-	rwlock_init(&priv->lock);
+	struct fakelb_phy *phy, *tmp;
+	int err, i;
 
 	for (i = 0; i < numlbs; i++) {
-		err = fakelb_add_one(&pdev->dev, priv);
+		err = fakelb_add_one(&pdev->dev);
 		if (err < 0)
 			goto err_slave;
 	}
 
-	platform_set_drvdata(pdev, priv);
 	dev_info(&pdev->dev, "added ieee802154 hardware\n");
 	return 0;
 
 err_slave:
-	list_for_each_entry(dp, &priv->list, list)
-		fakelb_del(dp);
-err_alloc:
+	spin_lock(&fakelb_phys_lock);
+	list_for_each_entry_safe(phy, tmp, &fakelb_phys, list)
+		fakelb_del(phy);
+	spin_unlock(&fakelb_phys_lock);
 	return err;
 }
 
 static int fakelb_remove(struct platform_device *pdev)
 {
-	struct fakelb_priv *priv = platform_get_drvdata(pdev);
-	struct fakelb_dev_priv *dp, *temp;
-
-	list_for_each_entry_safe(dp, temp, &priv->list, list)
-		fakelb_del(dp);
+	struct fakelb_phy *phy, *tmp;
 
+	spin_lock(&fakelb_phys_lock);
+	list_for_each_entry_safe(phy, tmp, &fakelb_phys, list)
+		fakelb_del(phy);
+	spin_unlock(&fakelb_phys_lock);
 	return 0;
 }
 
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index fba2dfd91..2549760e0 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -533,6 +533,7 @@ static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
 	u8 lqi = 0;
 	u8 val;
 	int ret = 0;
+	int ret2;
 	struct sk_buff *skb;
 
 	/* Turn off reception of packets off the air. This prevents the
@@ -569,9 +570,9 @@ static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
 
 out:
 	/* Turn back on reception of packets off the air. */
-	ret = read_short_reg(devrec, REG_BBREG1, &val);
-	if (ret)
-		return ret;
+	ret2 = read_short_reg(devrec, REG_BBREG1, &val);
+	if (ret2)
+		return ret2;
 	val &= ~0x4; /* Clear RXDECINV */
 	write_short_reg(devrec, REG_BBREG1, val);
 
@@ -750,9 +751,8 @@ static int mrf24j40_probe(struct spi_device *spi)
 
 	devrec->hw->priv = devrec;
 	devrec->hw->parent = &devrec->spi->dev;
-	devrec->hw->phy->channels_supported[0] = CHANNEL_MASK;
-	devrec->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
-			    IEEE802154_HW_AFILT;
+	devrec->hw->phy->supported.channels[0] = CHANNEL_MASK;
+	devrec->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AFILT;
 
 	dev_dbg(printdev(devrec), "registered mrf24j40\n");
 	ret = ieee802154_register_hw(devrec->hw);