Initial import

1 files changed, 220 insertions, 0 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
new file mode 100644
index 000000000..70641d2c0
--- /dev/null
+++ b/drivers/net/phy/Kconfig
@@ -0,0 +1,220 @@
+#
+# PHY Layer Configuration
+#
+
+menuconfig PHYLIB
+	tristate "PHY Device support and infrastructure"
+	depends on NETDEVICES
+	help
+	  Ethernet controllers are usually attached to PHY
+	  devices.  This option provides infrastructure for
+	  managing PHY devices.
+
+if PHYLIB
+
+comment "MII PHY device drivers"
+
+config AT803X_PHY
+	tristate "Drivers for Atheros AT803X PHYs"
+	---help---
+	  Currently supports the AT8030 and AT8035 model
+
+config AMD_PHY
+	tristate "Drivers for the AMD PHYs"
+	---help---
+	  Currently supports the am79c874
+
+config AMD_XGBE_PHY
+	tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs"
+	depends on (OF || ACPI) && HAS_IOMEM
+	depends on ARM64 || COMPILE_TEST
+	---help---
+	  Currently supports the AMD 10GbE PHY
+
+config MARVELL_PHY
+	tristate "Drivers for Marvell PHYs"
+	---help---
+	  Currently has a driver for the 88E1011S
+	
+config DAVICOM_PHY
+	tristate "Drivers for Davicom PHYs"
+	---help---
+	  Currently supports dm9161e and dm9131
+
+config QSEMI_PHY
+	tristate "Drivers for Quality Semiconductor PHYs"
+	---help---
+	  Currently supports the qs6612
+
+config LXT_PHY
+	tristate "Drivers for the Intel LXT PHYs"
+	---help---
+	  Currently supports the lxt970, lxt971
+
+config CICADA_PHY
+	tristate "Drivers for the Cicada PHYs"
+	---help---
+	  Currently supports the cis8204
+
+config VITESSE_PHY
+        tristate "Drivers for the Vitesse PHYs"
+        ---help---
+          Currently supports the vsc8244
+
+config SMSC_PHY
+	tristate "Drivers for SMSC PHYs"
+	---help---
+	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
+
+config BROADCOM_PHY
+	tristate "Drivers for Broadcom PHYs"
+	---help---
+	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
+	  BCM5481 and BCM5482 PHYs.
+
+config BCM63XX_PHY
+	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
+	depends on BCM63XX
+	---help---
+	  Currently supports the 6348 and 6358 PHYs.
+
+config BCM7XXX_PHY
+	tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
+	---help---
+	  Currently supports the BCM7366, BCM7439, BCM7445, and
+	  40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
+
+config BCM87XX_PHY
+	tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
+	help
+	  Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
+
+config ICPLUS_PHY
+	tristate "Drivers for ICPlus PHYs"
+	---help---
+	  Currently supports the IP175C and IP1001 PHYs.
+
+config REALTEK_PHY
+	tristate "Drivers for Realtek PHYs"
+	---help---
+	  Supports the Realtek 821x PHY.
+
+config NATIONAL_PHY
+	tristate "Drivers for National Semiconductor PHYs"
+	---help---
+	  Currently supports the DP83865 PHY.
+
+config STE10XP
+	tristate "Driver for STMicroelectronics STe10Xp PHYs"
+	---help---
+	  This is the driver for the STe100p and STe101p PHYs.
+
+config LSI_ET1011C_PHY
+	tristate "Driver for LSI ET1011C PHY"
+	---help---
+	  Supports the LSI ET1011C PHY.
+
+config MICREL_PHY
+	tristate "Driver for Micrel PHYs"
+	---help---
+	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
+config FIXED_PHY
+	tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+	depends on PHYLIB
+	---help---
+	  Adds the platform "fixed" MDIO Bus to cover the boards that use
+	  PHYs that are not connected to the real MDIO bus.
+
+	  Currently tested with mpc866ads and mpc8349e-mitx.
+
+config MDIO_BITBANG
+	tristate "Support for bitbanged MDIO buses"
+	help
+	  This module implements the MDIO bus protocol in software,
+	  for use by low level drivers that export the ability to
+	  drive the relevant pins.
+
+	  If in doubt, say N.
+
+config MDIO_GPIO
+	tristate "Support for GPIO lib-based bitbanged MDIO buses"
+	depends on MDIO_BITBANG && GPIOLIB
+	---help---
+	  Supports GPIO lib-based MDIO busses.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mdio-gpio.
+
+config MDIO_OCTEON
+	tristate "Support for MDIO buses on Octeon SOCs"
+	depends on CAVIUM_OCTEON_SOC
+	default y
+	help
+
+	  This module provides a driver for the Octeon MDIO busses.
+	  It is required by the Octeon Ethernet device drivers.
+
+	  If in doubt, say Y.
+
+config MDIO_SUN4I
+	tristate "Allwinner sun4i MDIO interface support"
+	depends on ARCH_SUNXI
+	help
+	  This driver supports the MDIO interface found in the network
+	  interface units of the Allwinner SoC that have an EMAC (A10,
+	  A12, A10s, etc.)
+
+config MDIO_MOXART
+        tristate "MOXA ART MDIO interface support"
+        depends on ARCH_MOXART
+        help
+          This driver supports the MDIO interface found in the network
+          interface units of the MOXA ART SoC
+
+config MDIO_BUS_MUX
+	tristate
+	depends on OF_MDIO
+	help
+	  This module provides a driver framework for MDIO bus
+	  multiplexers which connect one of several child MDIO busses
+	  to a parent bus.  Switching between child busses is done by
+	  device specific drivers.
+
+config MDIO_BUS_MUX_GPIO
+	tristate "Support for GPIO controlled MDIO bus multiplexers"
+	depends on OF_GPIO && OF_MDIO
+	select MDIO_BUS_MUX
+	help
+	  This module provides a driver for MDIO bus multiplexers that
+	  are controlled via GPIO lines.  The multiplexer connects one of
+	  several child MDIO busses to a parent bus.  Child bus
+	  selection is under the control of GPIO lines.
+
+config MDIO_BUS_MUX_MMIOREG
+	tristate "Support for MMIO device-controlled MDIO bus multiplexers"
+	depends on OF_MDIO
+	select MDIO_BUS_MUX
+	help
+	  This module provides a driver for MDIO bus multiplexers that
+	  are controlled via a simple memory-mapped device, like an FPGA.
+	  The multiplexer connects one of several child MDIO busses to a
+	  parent bus.  Child bus selection is under the control of one of
+	  the FPGA's registers.
+
+	  Currently, only 8-bit registers are supported.
+
+config MDIO_BCM_UNIMAC
+	tristate "Broadcom UniMAC MDIO bus controller"
+	depends on HAS_IOMEM
+	help
+	  This module provides a driver for the Broadcom UniMAC MDIO busses.
+	  This hardware can be found in the Broadcom GENET Ethernet MAC
+	  controllers as well as some Broadcom Ethernet switches such as the
+	  Starfighter 2 switches.
+
+endif # PHYLIB
+
+config MICREL_KS8995MA
+	tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
+	depends on SPI