Linux-libre 4.5-gnu

1 files changed, 56 insertions, 52 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 47cd306db..5590b9c18 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -319,7 +319,7 @@ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 {
 	u32 speed = ethtool_cmd_speed(cmd);
 
-	if (cmd->phy_address != phydev->addr)
+	if (cmd->phy_address != phydev->mdio.addr)
 		return -EINVAL;
 
 	/* We make sure that we don't pass unsupported values in to the PHY */
@@ -375,7 +375,7 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 		cmd->port = PORT_BNC;
 	else
 		cmd->port = PORT_MII;
-	cmd->phy_address = phydev->addr;
+	cmd->phy_address = phydev->mdio.addr;
 	cmd->transceiver = phy_is_internal(phydev) ?
 		XCVR_INTERNAL : XCVR_EXTERNAL;
 	cmd->autoneg = phydev->autoneg;
@@ -403,16 +403,17 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
 
 	switch (cmd) {
 	case SIOCGMIIPHY:
-		mii_data->phy_id = phydev->addr;
+		mii_data->phy_id = phydev->mdio.addr;
 		/* fall through */
 
 	case SIOCGMIIREG:
-		mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id,
+		mii_data->val_out = mdiobus_read(phydev->mdio.bus,
+						 mii_data->phy_id,
 						 mii_data->reg_num);
 		return 0;
 
 	case SIOCSMIIREG:
-		if (mii_data->phy_id == phydev->addr) {
+		if (mii_data->phy_id == phydev->mdio.addr) {
 			switch (mii_data->reg_num) {
 			case MII_BMCR:
 				if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
@@ -445,10 +446,10 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
 			}
 		}
 
-		mdiobus_write(phydev->bus, mii_data->phy_id,
+		mdiobus_write(phydev->mdio.bus, mii_data->phy_id,
 			      mii_data->reg_num, val);
 
-		if (mii_data->phy_id == phydev->addr &&
+		if (mii_data->phy_id == phydev->mdio.addr &&
 		    mii_data->reg_num == MII_BMCR &&
 		    val & BMCR_RESET)
 			return phy_init_hw(phydev);
@@ -643,7 +644,7 @@ int phy_start_interrupts(struct phy_device *phydev)
 	if (request_irq(phydev->irq, phy_interrupt, 0, "phy_interrupt",
 			phydev) < 0) {
 		pr_warn("%s: Can't get IRQ %d (PHY)\n",
-			phydev->bus->name, phydev->irq);
+			phydev->mdio.bus->name, phydev->irq);
 		phydev->irq = PHY_POLL;
 		return 0;
 	}
@@ -691,25 +692,29 @@ void phy_change(struct work_struct *work)
 	struct phy_device *phydev =
 		container_of(work, struct phy_device, phy_queue);
 
-	if (phydev->drv->did_interrupt &&
-	    !phydev->drv->did_interrupt(phydev))
-		goto ignore;
+	if (phy_interrupt_is_valid(phydev)) {
+		if (phydev->drv->did_interrupt &&
+		    !phydev->drv->did_interrupt(phydev))
+			goto ignore;
 
-	if (phy_disable_interrupts(phydev))
-		goto phy_err;
+		if (phy_disable_interrupts(phydev))
+			goto phy_err;
+	}
 
 	mutex_lock(&phydev->lock);
 	if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
 		phydev->state = PHY_CHANGELINK;
 	mutex_unlock(&phydev->lock);
 
-	atomic_dec(&phydev->irq_disable);
-	enable_irq(phydev->irq);
+	if (phy_interrupt_is_valid(phydev)) {
+		atomic_dec(&phydev->irq_disable);
+		enable_irq(phydev->irq);
 
-	/* Reenable interrupts */
-	if (PHY_HALTED != phydev->state &&
-	    phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED))
-		goto irq_enable_err;
+		/* Reenable interrupts */
+		if (PHY_HALTED != phydev->state &&
+		    phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED))
+			goto irq_enable_err;
+	}
 
 	/* reschedule state queue work to run as soon as possible */
 	cancel_delayed_work_sync(&phydev->state_queue);
@@ -904,10 +909,10 @@ void phy_state_machine(struct work_struct *work)
 		phydev->adjust_link(phydev->attached_dev);
 		break;
 	case PHY_RUNNING:
-		/* Only register a CHANGE if we are polling or ignoring
-		 * interrupts and link changed since latest checking.
+		/* Only register a CHANGE if we are polling and link changed
+		 * since latest checking.
 		 */
-		if (!phy_interrupt_is_valid(phydev)) {
+		if (phydev->irq == PHY_POLL) {
 			old_link = phydev->link;
 			err = phy_read_status(phydev);
 			if (err)
@@ -995,18 +1000,25 @@ void phy_state_machine(struct work_struct *work)
 	if (err < 0)
 		phy_error(phydev);
 
-	dev_dbg(&phydev->dev, "PHY state change %s -> %s\n",
-		phy_state_to_str(old_state), phy_state_to_str(phydev->state));
+	phydev_dbg(phydev, "PHY state change %s -> %s\n",
+		   phy_state_to_str(old_state),
+		   phy_state_to_str(phydev->state));
 
-	queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
-			   PHY_STATE_TIME * HZ);
+	/* Only re-schedule a PHY state machine change if we are polling the
+	 * PHY, if PHY_IGNORE_INTERRUPT is set, then we will be moving
+	 * between states from phy_mac_interrupt()
+	 */
+	if (phydev->irq == PHY_POLL)
+		queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
+				   PHY_STATE_TIME * HZ);
 }
 
 void phy_mac_interrupt(struct phy_device *phydev, int new_link)
 {
-	cancel_work_sync(&phydev->phy_queue);
 	phydev->link = new_link;
-	schedule_work(&phydev->phy_queue);
+
+	/* Trigger a state machine change */
+	queue_work(system_power_efficient_wq, &phydev->phy_queue);
 }
 EXPORT_SYMBOL(phy_mac_interrupt);
 
@@ -1028,7 +1040,6 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
  * @phydev: The PHY device bus
  * @prtad: MMD Address
  * @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
  *
  * Description: it reads data from the MMD registers (clause 22 to access to
  * clause 45) of the specified phy address.
@@ -1038,14 +1049,14 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
  * 3) Read  reg 14 // Read MMD data
  */
-int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
-				 int devad, int addr)
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad)
 {
 	struct phy_driver *phydrv = phydev->drv;
+	int addr = phydev->mdio.addr;
 	int value = -1;
 
 	if (!phydrv->read_mmd_indirect) {
-		struct mii_bus *bus = phydev->bus;
+		struct mii_bus *bus = phydev->mdio.bus;
 
 		mutex_lock(&bus->mdio_lock);
 		mmd_phy_indirect(bus, prtad, devad, addr);
@@ -1065,7 +1076,6 @@ EXPORT_SYMBOL(phy_read_mmd_indirect);
  * @phydev: The PHY device
  * @prtad: MMD Address
  * @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
  * @data: data to write in the MMD register
  *
  * Description: Write data from the MMD registers of the specified
@@ -1077,12 +1087,13 @@ EXPORT_SYMBOL(phy_read_mmd_indirect);
  * 3) Write reg 14 // Write MMD data
  */
 void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
-				   int devad, int addr, u32 data)
+				   int devad, u32 data)
 {
 	struct phy_driver *phydrv = phydev->drv;
+	int addr = phydev->mdio.addr;
 
 	if (!phydrv->write_mmd_indirect) {
-		struct mii_bus *bus = phydev->bus;
+		struct mii_bus *bus = phydev->mdio.bus;
 
 		mutex_lock(&bus->mdio_lock);
 		mmd_phy_indirect(bus, prtad, devad, addr);
@@ -1129,7 +1140,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 
 		/* First check if the EEE ability is supported */
 		eee_cap = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
-						MDIO_MMD_PCS, phydev->addr);
+						MDIO_MMD_PCS);
 		if (eee_cap <= 0)
 			goto eee_exit_err;
 
@@ -1141,12 +1152,12 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 		 * the EEE advertising registers.
 		 */
 		eee_lp = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
-					       MDIO_MMD_AN, phydev->addr);
+					       MDIO_MMD_AN);
 		if (eee_lp <= 0)
 			goto eee_exit_err;
 
 		eee_adv = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
-						MDIO_MMD_AN, phydev->addr);
+						MDIO_MMD_AN);
 		if (eee_adv <= 0)
 			goto eee_exit_err;
 
@@ -1160,15 +1171,13 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 			 * clock while it is signaling LPI.
 			 */
 			int val = phy_read_mmd_indirect(phydev, MDIO_CTRL1,
-							MDIO_MMD_PCS,
-							phydev->addr);
+							MDIO_MMD_PCS);
 			if (val < 0)
 				return val;
 
 			val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
 			phy_write_mmd_indirect(phydev, MDIO_CTRL1,
-					       MDIO_MMD_PCS, phydev->addr,
-					       val);
+					       MDIO_MMD_PCS, val);
 		}
 
 		return 0; /* EEE supported */
@@ -1187,8 +1196,7 @@ EXPORT_SYMBOL(phy_init_eee);
  */
 int phy_get_eee_err(struct phy_device *phydev)
 {
-	return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR,
-				     MDIO_MMD_PCS, phydev->addr);
+	return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR, MDIO_MMD_PCS);
 }
 EXPORT_SYMBOL(phy_get_eee_err);
 
@@ -1205,22 +1213,19 @@ int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
 	int val;
 
 	/* Get Supported EEE */
-	val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
-				    MDIO_MMD_PCS, phydev->addr);
+	val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE, MDIO_MMD_PCS);
 	if (val < 0)
 		return val;
 	data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
 
 	/* Get advertisement EEE */
-	val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
-				    MDIO_MMD_AN, phydev->addr);
+	val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN);
 	if (val < 0)
 		return val;
 	data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
 
 	/* Get LP advertisement EEE */
-	val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
-				    MDIO_MMD_AN, phydev->addr);
+	val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE, MDIO_MMD_AN);
 	if (val < 0)
 		return val;
 	data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
@@ -1240,8 +1245,7 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
 {
 	int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
 
-	phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
-			       phydev->addr, val);
+	phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
 
 	return 0;
 }