Linux-libre 4.5-gnu

39 files changed, 1166 insertions, 570 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 60994a83a..f0a770200 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -186,6 +186,7 @@ config MDIO_GPIO
 config MDIO_OCTEON
 	tristate "Support for MDIO buses on Octeon and ThunderX SOCs"
 	depends on 64BIT
+	depends on HAS_IOMEM
 	help
 
 	  This module provides a driver for the Octeon and ThunderX MDIO
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index f31a4e25c..680e88f99 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -1,6 +1,6 @@
 # Makefile for Linux PHY drivers
 
-libphy-objs			:= phy.o phy_device.o mdio_bus.o
+libphy-objs			:= phy.o phy_device.o mdio_bus.o mdio_device.o
 
 obj-$(CONFIG_PHYLIB)		+= libphy.o
 obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
diff --git a/drivers/net/phy/amd.c b/drivers/net/phy/amd.c
index 65a488f82..18141c022 100644
--- a/drivers/net/phy/amd.c
+++ b/drivers/net/phy/amd.c
@@ -72,7 +72,6 @@ static struct phy_driver am79c_driver[] = { {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= am79c_ack_interrupt,
 	.config_intr	= am79c_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 } };
 
 module_phy_driver(am79c_driver);
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
index f1936b7a7..09b0b0aa8 100644
--- a/drivers/net/phy/aquantia.c
+++ b/drivers/net/phy/aquantia.c
@@ -128,7 +128,6 @@ static struct phy_driver aquantia_driver[] = {
 	.config_intr	= aquantia_config_intr,
 	.ack_interrupt	= aquantia_ack_interrupt,
 	.read_status	= aquantia_read_status,
-	.driver		= { .owner = THIS_MODULE,},
 },
 {
 	.phy_id		= PHY_ID_AQ2104,
@@ -141,7 +140,6 @@ static struct phy_driver aquantia_driver[] = {
 	.config_intr	= aquantia_config_intr,
 	.ack_interrupt	= aquantia_ack_interrupt,
 	.read_status	= aquantia_read_status,
-	.driver		= { .owner = THIS_MODULE,},
 },
 {
 	.phy_id		= PHY_ID_AQR105,
@@ -154,7 +152,6 @@ static struct phy_driver aquantia_driver[] = {
 	.config_intr	= aquantia_config_intr,
 	.ack_interrupt	= aquantia_ack_interrupt,
 	.read_status	= aquantia_read_status,
-	.driver		= { .owner = THIS_MODULE,},
 },
 {
 	.phy_id		= PHY_ID_AQR405,
@@ -167,7 +164,6 @@ static struct phy_driver aquantia_driver[] = {
 	.config_intr	= aquantia_config_intr,
 	.ack_interrupt	= aquantia_ack_interrupt,
 	.read_status	= aquantia_read_status,
-	.driver		= { .owner = THIS_MODULE,},
 },
 };
 
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 2d020a3ec..2174ec937 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -20,10 +20,21 @@
 #include <linux/gpio/consumer.h>
 
 #define AT803X_INTR_ENABLE			0x12
+#define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
+#define AT803X_INTR_ENABLE_SPEED_CHANGED	BIT(14)
+#define AT803X_INTR_ENABLE_DUPLEX_CHANGED	BIT(13)
+#define AT803X_INTR_ENABLE_PAGE_RECEIVED	BIT(12)
+#define AT803X_INTR_ENABLE_LINK_FAIL		BIT(11)
+#define AT803X_INTR_ENABLE_LINK_SUCCESS		BIT(10)
+#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE	BIT(5)
+#define AT803X_INTR_ENABLE_POLARITY_CHANGED	BIT(1)
+#define AT803X_INTR_ENABLE_WOL			BIT(0)
+
 #define AT803X_INTR_STATUS			0x13
+
 #define AT803X_SMART_SPEED			0x14
 #define AT803X_LED_CONTROL			0x18
-#define AT803X_WOL_ENABLE			0x01
+
 #define AT803X_DEVICE_ADDR			0x03
 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
 #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
@@ -31,13 +42,15 @@
 #define AT803X_MMD_ACCESS_CONTROL		0x0D
 #define AT803X_MMD_ACCESS_CONTROL_DATA		0x0E
 #define AT803X_FUNC_DATA			0x4003
-#define AT803X_INER				0x0012
-#define AT803X_INER_INIT			0xec00
-#define AT803X_INSR				0x0013
+
 #define AT803X_DEBUG_ADDR			0x1D
 #define AT803X_DEBUG_DATA			0x1E
-#define AT803X_DEBUG_SYSTEM_MODE_CTRL		0x05
-#define AT803X_DEBUG_RGMII_TX_CLK_DLY		BIT(8)
+
+#define AT803X_DEBUG_REG_0			0x00
+#define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
+
+#define AT803X_DEBUG_REG_5			0x05
+#define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
 
 #define ATH8030_PHY_ID 0x004dd076
 #define ATH8031_PHY_ID 0x004dd074
@@ -61,6 +74,46 @@ struct at803x_context {
 	u16 led_control;
 };
 
+static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
+{
+	int ret;
+
+	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
+	if (ret < 0)
+		return ret;
+
+	return phy_read(phydev, AT803X_DEBUG_DATA);
+}
+
+static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
+				 u16 clear, u16 set)
+{
+	u16 val;
+	int ret;
+
+	ret = at803x_debug_reg_read(phydev, reg);
+	if (ret < 0)
+		return ret;
+
+	val = ret & 0xffff;
+	val &= ~clear;
+	val |= set;
+
+	return phy_write(phydev, AT803X_DEBUG_DATA, val);
+}
+
+static inline int at803x_enable_rx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
+					AT803X_DEBUG_RX_CLK_DLY_EN);
+}
+
+static inline int at803x_enable_tx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
+					AT803X_DEBUG_TX_CLK_DLY_EN);
+}
+
 /* save relevant PHY registers to private copy */
 static void at803x_context_save(struct phy_device *phydev,
 				struct at803x_context *context)
@@ -119,14 +172,14 @@ static int at803x_set_wol(struct phy_device *phydev,
 		}
 
 		value = phy_read(phydev, AT803X_INTR_ENABLE);
-		value |= AT803X_WOL_ENABLE;
+		value |= AT803X_INTR_ENABLE_WOL;
 		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
 		if (ret)
 			return ret;
 		value = phy_read(phydev, AT803X_INTR_STATUS);
 	} else {
 		value = phy_read(phydev, AT803X_INTR_ENABLE);
-		value &= (~AT803X_WOL_ENABLE);
+		value &= (~AT803X_INTR_ENABLE_WOL);
 		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
 		if (ret)
 			return ret;
@@ -145,7 +198,7 @@ static void at803x_get_wol(struct phy_device *phydev,
 	wol->wolopts = 0;
 
 	value = phy_read(phydev, AT803X_INTR_ENABLE);
-	if (value & AT803X_WOL_ENABLE)
+	if (value & AT803X_INTR_ENABLE_WOL)
 		wol->wolopts |= WAKE_MAGIC;
 }
 
@@ -157,7 +210,7 @@ static int at803x_suspend(struct phy_device *phydev)
 	mutex_lock(&phydev->lock);
 
 	value = phy_read(phydev, AT803X_INTR_ENABLE);
-	wol_enabled = value & AT803X_WOL_ENABLE;
+	wol_enabled = value & AT803X_INTR_ENABLE_WOL;
 
 	value = phy_read(phydev, MII_BMCR);
 
@@ -190,7 +243,7 @@ static int at803x_resume(struct phy_device *phydev)
 
 static int at803x_probe(struct phy_device *phydev)
 {
-	struct device *dev = &phydev->dev;
+	struct device *dev = &phydev->mdio.dev;
 	struct at803x_priv *priv;
 	struct gpio_desc *gpiod_reset;
 
@@ -217,14 +270,17 @@ static int at803x_config_init(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
-		ret = phy_write(phydev, AT803X_DEBUG_ADDR,
-				AT803X_DEBUG_SYSTEM_MODE_CTRL);
-		if (ret)
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
+			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+		ret = at803x_enable_rx_delay(phydev);
+		if (ret < 0)
 			return ret;
-		ret = phy_write(phydev, AT803X_DEBUG_DATA,
-				AT803X_DEBUG_RGMII_TX_CLK_DLY);
-		if (ret)
+	}
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
+			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+		ret = at803x_enable_tx_delay(phydev);
+		if (ret < 0)
 			return ret;
 	}
 
@@ -235,7 +291,7 @@ static int at803x_ack_interrupt(struct phy_device *phydev)
 {
 	int err;
 
-	err = phy_read(phydev, AT803X_INSR);
+	err = phy_read(phydev, AT803X_INTR_STATUS);
 
 	return (err < 0) ? err : 0;
 }
@@ -245,13 +301,19 @@ static int at803x_config_intr(struct phy_device *phydev)
 	int err;
 	int value;
 
-	value = phy_read(phydev, AT803X_INER);
+	value = phy_read(phydev, AT803X_INTR_ENABLE);
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
+		value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
+		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
+		value |= AT803X_INTR_ENABLE_LINK_FAIL;
+		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
 
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-		err = phy_write(phydev, AT803X_INER,
-				value | AT803X_INER_INIT);
+		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
+	}
 	else
-		err = phy_write(phydev, AT803X_INER, 0);
+		err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
 
 	return err;
 }
@@ -281,8 +343,8 @@ static void at803x_link_change_notify(struct phy_device *phydev)
 
 				at803x_context_restore(phydev, &context);
 
-				dev_dbg(&phydev->dev, "%s(): phy was reset\n",
-					__func__);
+				phydev_dbg(phydev, "%s(): phy was reset\n",
+					   __func__);
 				priv->phy_reset = true;
 			}
 		} else {
@@ -310,9 +372,6 @@ static struct phy_driver at803x_driver[] = {
 	.read_status		= genphy_read_status,
 	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
-	.driver			= {
-		.owner = THIS_MODULE,
-	},
 }, {
 	/* ATHEROS 8030 */
 	.phy_id			= ATH8030_PHY_ID,
@@ -325,15 +384,12 @@ static struct phy_driver at803x_driver[] = {
 	.get_wol		= at803x_get_wol,
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
-	.features		= PHY_GBIT_FEATURES,
+	.features		= PHY_BASIC_FEATURES,
 	.flags			= PHY_HAS_INTERRUPT,
 	.config_aneg		= genphy_config_aneg,
 	.read_status		= genphy_read_status,
 	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
-	.driver			= {
-		.owner = THIS_MODULE,
-	},
 }, {
 	/* ATHEROS 8031 */
 	.phy_id			= ATH8031_PHY_ID,
@@ -352,9 +408,6 @@ static struct phy_driver at803x_driver[] = {
 	.read_status		= genphy_read_status,
 	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
-	.driver			= {
-		.owner = THIS_MODULE,
-	},
 } };
 
 module_phy_driver(at803x_driver);
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index ddb377e53..df0416db0 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -184,25 +184,25 @@ int bcm_phy_enable_eee(struct phy_device *phydev)
 
 	/* Enable EEE at PHY level */
 	val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
-				    MDIO_MMD_AN, phydev->addr);
+				    MDIO_MMD_AN);
 	if (val < 0)
 		return val;
 
 	val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
 
 	phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
-			       MDIO_MMD_AN,  phydev->addr, (u32)val);
+			       MDIO_MMD_AN, (u32)val);
 
 	/* Advertise EEE */
 	val = phy_read_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
-				    MDIO_MMD_AN, phydev->addr);
+				    MDIO_MMD_AN);
 	if (val < 0)
 		return val;
 
 	val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
 
 	phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
-			       MDIO_MMD_AN,  phydev->addr, (u32)val);
+			       MDIO_MMD_AN, (u32)val);
 
 	return 0;
 }
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index 86b28052b..e741bf614 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -56,7 +56,6 @@ static struct phy_driver bcm63xx_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	/* same phy as above, with just a different OUI */
 	.phy_id		= 0x002bdc00,
@@ -69,7 +68,6 @@ static struct phy_driver bcm63xx_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 } };
 
 module_phy_driver(bcm63xx_driver);
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 03d4809a9..db507e3bc 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -170,7 +170,7 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 	int ret = 0;
 
 	pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
-		     dev_name(&phydev->dev), phydev->drv->name, rev, patch);
+		     phydev_name(phydev), phydev->drv->name, rev, patch);
 
 	/* Dummy read to a register to workaround an issue upon reset where the
 	 * internal inverter may not allow the first MDIO transaction to pass
@@ -250,10 +250,6 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
 	phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
 	phy_read(phydev, MII_BCM7XXX_AUX_MODE);
 
-	/* Workaround only required for 100Mbits/sec capable PHYs */
-	if (phydev->supported & PHY_GBIT_FEATURES)
-		return 0;
-
 	/* set shadow mode 2 */
 	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
 			MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
@@ -270,7 +266,7 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
 	phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
 
 	/* reset shadow mode 2 */
-	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2);
 	if (ret < 0)
 		return ret;
 
@@ -307,11 +303,6 @@ static int bcm7xxx_suspend(struct phy_device *phydev)
 	return 0;
 }
 
-static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
-{
-	return 0;
-}
-
 #define BCM7XXX_28NM_GPHY(_oui, _name)					\
 {									\
 	.phy_id		= (_oui),					\
@@ -324,7 +315,6 @@ static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
 	.config_aneg	= genphy_config_aneg,				\
 	.read_status	= genphy_read_status,				\
 	.resume		= bcm7xxx_28nm_resume,				\
-	.driver		= { .owner = THIS_MODULE },			\
 }
 
 static struct phy_driver bcm7xxx_driver[] = {
@@ -338,7 +328,7 @@ static struct phy_driver bcm7xxx_driver[] = {
 	.phy_id         = PHY_ID_BCM7425,
 	.phy_id_mask    = 0xfffffff0,
 	.name           = "Broadcom BCM7425",
-	.features       = PHY_GBIT_FEATURES |
+	.features       = PHY_BASIC_FEATURES |
 			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags          = PHY_IS_INTERNAL,
 	.config_init    = bcm7xxx_config_init,
@@ -346,12 +336,11 @@ static struct phy_driver bcm7xxx_driver[] = {
 	.read_status    = genphy_read_status,
 	.suspend        = bcm7xxx_suspend,
 	.resume         = bcm7xxx_config_init,
-	.driver         = { .owner = THIS_MODULE },
 }, {
 	.phy_id         = PHY_ID_BCM7429,
 	.phy_id_mask    = 0xfffffff0,
 	.name           = "Broadcom BCM7429",
-	.features       = PHY_GBIT_FEATURES |
+	.features       = PHY_BASIC_FEATURES |
 			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags          = PHY_IS_INTERNAL,
 	.config_init    = bcm7xxx_config_init,
@@ -359,33 +348,18 @@ static struct phy_driver bcm7xxx_driver[] = {
 	.read_status    = genphy_read_status,
 	.suspend        = bcm7xxx_suspend,
 	.resume         = bcm7xxx_config_init,
-	.driver         = { .owner = THIS_MODULE },
-}, {
-	.phy_id		= PHY_BCM_OUI_4,
-	.phy_id_mask	= 0xffff0000,
-	.name		= "Broadcom BCM7XXX 40nm",
-	.features	= PHY_GBIT_FEATURES |
-			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
-	.flags		= PHY_IS_INTERNAL,
-	.config_init	= bcm7xxx_config_init,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.suspend	= bcm7xxx_suspend,
-	.resume		= bcm7xxx_config_init,
-	.driver		= { .owner = THIS_MODULE },
 }, {
-	.phy_id		= PHY_BCM_OUI_5,
-	.phy_id_mask	= 0xffffff00,
-	.name		= "Broadcom BCM7XXX 65nm",
-	.features	= PHY_BASIC_FEATURES |
+	.phy_id         = PHY_ID_BCM7435,
+	.phy_id_mask    = 0xfffffff0,
+	.name           = "Broadcom BCM7435",
+	.features       = PHY_BASIC_FEATURES |
 			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
-	.flags		= PHY_IS_INTERNAL,
-	.config_init	= bcm7xxx_dummy_config_init,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.suspend	= bcm7xxx_suspend,
-	.resume		= bcm7xxx_config_init,
-	.driver		= { .owner = THIS_MODULE },
+	.flags          = PHY_IS_INTERNAL,
+	.config_init    = bcm7xxx_config_init,
+	.config_aneg    = genphy_config_aneg,
+	.read_status    = genphy_read_status,
+	.suspend        = bcm7xxx_suspend,
+	.resume         = bcm7xxx_config_init,
 } };
 
 static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
@@ -395,9 +369,8 @@ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
 	{ PHY_ID_BCM7425, 0xfffffff0, },
 	{ PHY_ID_BCM7429, 0xfffffff0, },
 	{ PHY_ID_BCM7439, 0xfffffff0, },
+	{ PHY_ID_BCM7435, 0xfffffff0, },
 	{ PHY_ID_BCM7445, 0xfffffff0, },
-	{ PHY_BCM_OUI_4, 0xffff0000 },
-	{ PHY_BCM_OUI_5, 0xffffff00 },
 	{ }
 };
 
diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c
index 1eca20452..f7ebdcff5 100644
--- a/drivers/net/phy/bcm87xx.c
+++ b/drivers/net/phy/bcm87xx.c
@@ -40,10 +40,10 @@ static int bcm87xx_of_reg_init(struct phy_device *phydev)
 	const __be32 *paddr_end;
 	int len, ret;
 
-	if (!phydev->dev.of_node)
+	if (!phydev->mdio.dev.of_node)
 		return 0;
 
-	paddr = of_get_property(phydev->dev.of_node,
+	paddr = of_get_property(phydev->mdio.dev.of_node,
 				"broadcom,c45-reg-init", &len);
 	if (!paddr)
 		return 0;
@@ -163,8 +163,9 @@ static int bcm87xx_did_interrupt(struct phy_device *phydev)
 	reg = phy_read(phydev, BCM87XX_LASI_STATUS);
 
 	if (reg < 0) {
-		dev_err(&phydev->dev,
-			"Error: Read of BCM87XX_LASI_STATUS failed: %d\n", reg);
+		phydev_err(phydev,
+			   "Error: Read of BCM87XX_LASI_STATUS failed: %d\n",
+			   reg);
 		return 0;
 	}
 	return (reg & 1) != 0;
@@ -200,7 +201,6 @@ static struct phy_driver bcm87xx_driver[] = {
 	.config_intr	= bcm87xx_config_intr,
 	.did_interrupt	= bcm87xx_did_interrupt,
 	.match_phy_device = bcm8706_match_phy_device,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM8727,
 	.phy_id_mask	= 0xffffffff,
@@ -213,7 +213,6 @@ static struct phy_driver bcm87xx_driver[] = {
 	.config_intr	= bcm87xx_config_intr,
 	.did_interrupt	= bcm87xx_did_interrupt,
 	.match_phy_device = bcm8727_match_phy_device,
-	.driver		= { .owner = THIS_MODULE },
 } };
 
 module_phy_driver(bcm87xx_driver);
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 3ce5d9514..870327efc 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -460,7 +460,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM5421,
 	.phy_id_mask	= 0xfffffff0,
@@ -473,7 +472,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM5461,
 	.phy_id_mask	= 0xfffffff0,
@@ -486,7 +484,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM54616S,
 	.phy_id_mask	= 0xfffffff0,
@@ -499,7 +496,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM5464,
 	.phy_id_mask	= 0xfffffff0,
@@ -512,7 +508,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM5481,
 	.phy_id_mask	= 0xfffffff0,
@@ -525,7 +520,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM5482,
 	.phy_id_mask	= 0xfffffff0,
@@ -538,7 +532,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= bcm5482_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM50610,
 	.phy_id_mask	= 0xfffffff0,
@@ -551,7 +544,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM50610M,
 	.phy_id_mask	= 0xfffffff0,
@@ -564,7 +556,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM57780,
 	.phy_id_mask	= 0xfffffff0,
@@ -577,7 +568,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCMAC131,
 	.phy_id_mask	= 0xfffffff0,
@@ -590,7 +580,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= brcm_fet_ack_interrupt,
 	.config_intr	= brcm_fet_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM5241,
 	.phy_id_mask	= 0xfffffff0,
@@ -603,7 +592,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= brcm_fet_ack_interrupt,
 	.config_intr	= brcm_fet_config_intr,
-	.driver		= { .owner = THIS_MODULE },
 } };
 
 module_phy_driver(broadcom_drivers);
diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c
index 27f546489..d339c1afe 100644
--- a/drivers/net/phy/cicada.c
+++ b/drivers/net/phy/cicada.c
@@ -114,7 +114,6 @@ static struct phy_driver cis820x_driver[] = {
 	.read_status	= &genphy_read_status,
 	.ack_interrupt	= &cis820x_ack_interrupt,
 	.config_intr	= &cis820x_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= 0x000fc440,
 	.name		= "Cicada Cis8204",
@@ -126,7 +125,6 @@ static struct phy_driver cis820x_driver[] = {
 	.read_status	= &genphy_read_status,
 	.ack_interrupt	= &cis820x_ack_interrupt,
 	.config_intr	= &cis820x_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 } };
 
 module_phy_driver(cis820x_driver);
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
index 2a328703b..36e3e2033 100644
--- a/drivers/net/phy/davicom.c
+++ b/drivers/net/phy/davicom.c
@@ -156,7 +156,6 @@ static struct phy_driver dm91xx_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= dm9161_ack_interrupt,
 	.config_intr	= dm9161_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= 0x0181b8b0,
 	.name		= "Davicom DM9161B/C",
@@ -168,7 +167,6 @@ static struct phy_driver dm91xx_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= dm9161_ack_interrupt,
 	.config_intr	= dm9161_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= 0x0181b8a0,
 	.name		= "Davicom DM9161A",
@@ -180,7 +178,6 @@ static struct phy_driver dm91xx_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= dm9161_ack_interrupt,
 	.config_intr	= dm9161_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= 0x00181b80,
 	.name		= "Davicom DM9131",
@@ -191,7 +188,6 @@ static struct phy_driver dm91xx_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= dm9161_ack_interrupt,
 	.config_intr	= dm9161_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 } };
 
 module_phy_driver(dm91xx_driver);
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index e6cefd0e3..7a240fce3 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -220,9 +220,10 @@ static void rx_timestamp_work(struct work_struct *work);
 
 #define BROADCAST_ADDR 31
 
-static inline int broadcast_write(struct mii_bus *bus, u32 regnum, u16 val)
+static inline int broadcast_write(struct phy_device *phydev, u32 regnum,
+				  u16 val)
 {
-	return mdiobus_write(bus, BROADCAST_ADDR, regnum, val);
+	return mdiobus_write(phydev->mdio.bus, BROADCAST_ADDR, regnum, val);
 }
 
 /* Caller must hold extreg_lock. */
@@ -232,7 +233,7 @@ static int ext_read(struct phy_device *phydev, int page, u32 regnum)
 	int val;
 
 	if (dp83640->clock->page != page) {
-		broadcast_write(phydev->bus, PAGESEL, page);
+		broadcast_write(phydev, PAGESEL, page);
 		dp83640->clock->page = page;
 	}
 	val = phy_read(phydev, regnum);
@@ -247,11 +248,11 @@ static void ext_write(int broadcast, struct phy_device *phydev,
 	struct dp83640_private *dp83640 = phydev->priv;
 
 	if (dp83640->clock->page != page) {
-		broadcast_write(phydev->bus, PAGESEL, page);
+		broadcast_write(phydev, PAGESEL, page);
 		dp83640->clock->page = page;
 	}
 	if (broadcast)
-		broadcast_write(phydev->bus, regnum, val);
+		broadcast_write(phydev, regnum, val);
 	else
 		phy_write(phydev, regnum, val);
 }
@@ -1056,7 +1057,7 @@ static int choose_this_phy(struct dp83640_clock *clock,
 	if (chosen_phy == -1 && !clock->chosen)
 		return 1;
 
-	if (chosen_phy == phydev->addr)
+	if (chosen_phy == phydev->mdio.addr)
 		return 1;
 
 	return 0;
@@ -1120,10 +1121,10 @@ static int dp83640_probe(struct phy_device *phydev)
 	struct dp83640_private *dp83640;
 	int err = -ENOMEM, i;
 
-	if (phydev->addr == BROADCAST_ADDR)
+	if (phydev->mdio.addr == BROADCAST_ADDR)
 		return 0;
 
-	clock = dp83640_clock_get_bus(phydev->bus);
+	clock = dp83640_clock_get_bus(phydev->mdio.bus);
 	if (!clock)
 		goto no_clock;
 
@@ -1149,7 +1150,8 @@ static int dp83640_probe(struct phy_device *phydev)
 
 	if (choose_this_phy(clock, phydev)) {
 		clock->chosen = dp83640;
-		clock->ptp_clock = ptp_clock_register(&clock->caps, &phydev->dev);
+		clock->ptp_clock = ptp_clock_register(&clock->caps,
+						      &phydev->mdio.dev);
 		if (IS_ERR(clock->ptp_clock)) {
 			err = PTR_ERR(clock->ptp_clock);
 			goto no_register;
@@ -1175,7 +1177,7 @@ static void dp83640_remove(struct phy_device *phydev)
 	struct list_head *this, *next;
 	struct dp83640_private *tmp, *dp83640 = phydev->priv;
 
-	if (phydev->addr == BROADCAST_ADDR)
+	if (phydev->mdio.addr == BROADCAST_ADDR)
 		return;
 
 	enable_status_frames(phydev, false);
@@ -1507,12 +1509,11 @@ static struct phy_driver dp83640_driver = {
 	.hwtstamp	= dp83640_hwtstamp,
 	.rxtstamp	= dp83640_rxtstamp,
 	.txtstamp	= dp83640_txtstamp,
-	.driver		= {.owner = THIS_MODULE,}
 };
 
 static int __init dp83640_init(void)
 {
-	return phy_driver_register(&dp83640_driver);
+	return phy_driver_register(&dp83640_driver, THIS_MODULE);
 }
 
 static void __exit dp83640_exit(void)
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 5ce9bef54..5e14e629c 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -88,8 +88,6 @@ static struct phy_driver dp83848_driver[] = {
 		/* IRQ related */
 		.ack_interrupt	= dp83848_ack_interrupt,
 		.config_intr	= dp83848_config_intr,
-
-		.driver		= { .owner = THIS_MODULE, },
 	},
 };
 module_phy_driver(dp83848_driver);
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 32f10662f..2afa61b51 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -103,14 +103,11 @@ static int dp83867_config_intr(struct phy_device *phydev)
 static int dp83867_of_init(struct phy_device *phydev)
 {
 	struct dp83867_private *dp83867 = phydev->priv;
-	struct device *dev = &phydev->dev;
+	struct device *dev = &phydev->mdio.dev;
 	struct device_node *of_node = dev->of_node;
 	int ret;
 
-	if (!of_node && dev->parent->of_node)
-		of_node = dev->parent->of_node;
-
-	if (!phydev->dev.of_node)
+	if (!of_node)
 		return -ENODEV;
 
 	ret = of_property_read_u32(of_node, "ti,rx-internal-delay",
@@ -140,7 +137,7 @@ static int dp83867_config_init(struct phy_device *phydev)
 	u16 val, delay;
 
 	if (!phydev->priv) {
-		dp83867 = devm_kzalloc(&phydev->dev, sizeof(*dp83867),
+		dp83867 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83867),
 				       GFP_KERNEL);
 		if (!dp83867)
 			return -ENOMEM;
@@ -163,7 +160,7 @@ static int dp83867_config_init(struct phy_device *phydev)
 	if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
 	    (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
 		val = phy_read_mmd_indirect(phydev, DP83867_RGMIICTL,
-					    DP83867_DEVADDR, phydev->addr);
+					    DP83867_DEVADDR);
 
 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
 			val |= (DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN);
@@ -175,13 +172,13 @@ static int dp83867_config_init(struct phy_device *phydev)
 			val |= DP83867_RGMII_RX_CLK_DELAY_EN;
 
 		phy_write_mmd_indirect(phydev, DP83867_RGMIICTL,
-				       DP83867_DEVADDR, phydev->addr, val);
+				       DP83867_DEVADDR, val);
 
 		delay = (dp83867->rx_id_delay |
 			(dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
 
 		phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL,
-				       DP83867_DEVADDR, phydev->addr, delay);
+				       DP83867_DEVADDR, delay);
 	}
 
 	return 0;
@@ -217,8 +214,6 @@ static struct phy_driver dp83867_driver[] = {
 		.read_status	= genphy_read_status,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
-
-		.driver		= {.owner = THIS_MODULE,}
 	},
 };
 module_phy_driver(dp83867_driver);
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index a90774381..a9a4edfa2 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -95,7 +95,6 @@ static struct phy_driver et1011c_driver[] = { {
 	.flags		= PHY_POLL,
 	.config_aneg	= et1011c_config_aneg,
 	.read_status	= et1011c_read_status,
-	.driver 	= { .owner = THIS_MODULE,},
 } };
 
 module_phy_driver(et1011c_driver);
diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c
index e23bf5b90..ab9c473d7 100644
--- a/drivers/net/phy/fixed_phy.c
+++ b/drivers/net/phy/fixed_phy.c
@@ -27,7 +27,6 @@
 #define MII_REGS_NUM 29
 
 struct fixed_mdio_bus {
-	int irqs[PHY_MAX_ADDR];
 	struct mii_bus *mii_bus;
 	struct list_head phys;
 };
@@ -198,11 +197,11 @@ int fixed_phy_set_link_update(struct phy_device *phydev,
 	struct fixed_mdio_bus *fmb = &platform_fmb;
 	struct fixed_phy *fp;
 
-	if (!phydev || !phydev->bus)
+	if (!phydev || !phydev->mdio.bus)
 		return -EINVAL;
 
 	list_for_each_entry(fp, &fmb->phys, node) {
-		if (fp->addr == phydev->addr) {
+		if (fp->addr == phydev->mdio.addr) {
 			fp->link_update = link_update;
 			fp->phydev = phydev;
 			return 0;
@@ -220,11 +219,11 @@ int fixed_phy_update_state(struct phy_device *phydev,
 	struct fixed_mdio_bus *fmb = &platform_fmb;
 	struct fixed_phy *fp;
 
-	if (!phydev || phydev->bus != fmb->mii_bus)
+	if (!phydev || phydev->mdio.bus != fmb->mii_bus)
 		return -EINVAL;
 
 	list_for_each_entry(fp, &fmb->phys, node) {
-		if (fp->addr == phydev->addr) {
+		if (fp->addr == phydev->mdio.addr) {
 #define _UPD(x) if (changed->x) \
 	fp->status.x = status->x
 			_UPD(link);
@@ -256,7 +255,7 @@ int fixed_phy_add(unsigned int irq, int phy_addr,
 
 	memset(fp->regs, 0xFF,  sizeof(fp->regs[0]) * MII_REGS_NUM);
 
-	fmb->irqs[phy_addr] = irq;
+	fmb->mii_bus->irq[phy_addr] = irq;
 
 	fp->addr = phy_addr;
 	fp->status = *status;
@@ -345,7 +344,7 @@ struct phy_device *fixed_phy_register(unsigned int irq,
 	}
 
 	of_node_get(np);
-	phy->dev.of_node = np;
+	phy->mdio.dev.of_node = np;
 	phy->is_pseudo_fixed_link = true;
 
 	switch (status->speed) {
@@ -395,7 +394,6 @@ static int __init fixed_mdio_bus_init(void)
 	fmb->mii_bus->parent = &pdev->dev;
 	fmb->mii_bus->read = &fixed_mdio_read;
 	fmb->mii_bus->write = &fixed_mdio_write;
-	fmb->mii_bus->irq = fmb->irqs;
 
 	ret = mdiobus_register(fmb->mii_bus);
 	if (ret)
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 0dbc445a5..e5f251b91 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -53,43 +53,43 @@ static int ip175c_config_init(struct phy_device *phydev)
 	if (full_reset_performed == 0) {
 
 		/* master reset */
-		err = mdiobus_write(phydev->bus, 30, 0, 0x175c);
+		err = mdiobus_write(phydev->mdio.bus, 30, 0, 0x175c);
 		if (err < 0)
 			return err;
 
 		/* ensure no bus delays overlap reset period */
-		err = mdiobus_read(phydev->bus, 30, 0);
+		err = mdiobus_read(phydev->mdio.bus, 30, 0);
 
 		/* data sheet specifies reset period is 2 msec */
 		mdelay(2);
 
 		/* enable IP175C mode */
-		err = mdiobus_write(phydev->bus, 29, 31, 0x175c);
+		err = mdiobus_write(phydev->mdio.bus, 29, 31, 0x175c);
 		if (err < 0)
 			return err;
 
 		/* Set MII0 speed and duplex (in PHY mode) */
-		err = mdiobus_write(phydev->bus, 29, 22, 0x420);
+		err = mdiobus_write(phydev->mdio.bus, 29, 22, 0x420);
 		if (err < 0)
 			return err;
 
 		/* reset switch ports */
 		for (i = 0; i < 5; i++) {
-			err = mdiobus_write(phydev->bus, i,
+			err = mdiobus_write(phydev->mdio.bus, i,
 					    MII_BMCR, BMCR_RESET);
 			if (err < 0)
 				return err;
 		}
 
 		for (i = 0; i < 5; i++)
-			err = mdiobus_read(phydev->bus, i, MII_BMCR);
+			err = mdiobus_read(phydev->mdio.bus, i, MII_BMCR);
 
 		mdelay(2);
 
 		full_reset_performed = 1;
 	}
 
-	if (phydev->addr != 4) {
+	if (phydev->mdio.addr != 4) {
 		phydev->state = PHY_RUNNING;
 		phydev->speed = SPEED_100;
 		phydev->duplex = DUPLEX_FULL;
@@ -184,7 +184,7 @@ static int ip101a_g_config_init(struct phy_device *phydev)
 
 static int ip175c_read_status(struct phy_device *phydev)
 {
-	if (phydev->addr == 4) /* WAN port */
+	if (phydev->mdio.addr == 4) /* WAN port */
 		genphy_read_status(phydev);
 	else
 		/* Don't need to read status for switch ports */
@@ -195,7 +195,7 @@ static int ip175c_read_status(struct phy_device *phydev)
 
 static int ip175c_config_aneg(struct phy_device *phydev)
 {
-	if (phydev->addr == 4) /* WAN port */
+	if (phydev->mdio.addr == 4) /* WAN port */
 		genphy_config_aneg(phydev);
 
 	return 0;
@@ -221,7 +221,6 @@ static struct phy_driver icplus_driver[] = {
 	.read_status	= &ip175c_read_status,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= 0x02430d90,
 	.name		= "ICPlus IP1001",
@@ -233,7 +232,6 @@ static struct phy_driver icplus_driver[] = {
 	.read_status	= &genphy_read_status,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= 0x02430c54,
 	.name		= "ICPlus IP101A/G",
@@ -247,7 +245,6 @@ static struct phy_driver icplus_driver[] = {
 	.read_status	= &genphy_read_status,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
 } };
 
 module_phy_driver(icplus_driver);
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index a3a5a7036..f6078376e 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -278,7 +278,6 @@ static struct phy_driver lxt97x_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= lxt970_ack_interrupt,
 	.config_intr	= lxt970_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= 0x001378e0,
 	.name		= "LXT971",
@@ -289,7 +288,6 @@ static struct phy_driver lxt97x_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= lxt971_ack_interrupt,
 	.config_intr	= lxt971_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= 0x00137a10,
 	.name		= "LXT973-A2",
@@ -299,7 +297,6 @@ static struct phy_driver lxt97x_driver[] = {
 	.probe		= lxt973_probe,
 	.config_aneg	= lxt973_config_aneg,
 	.read_status	= lxt973a2_read_status,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= 0x00137a10,
 	.name		= "LXT973",
@@ -309,7 +306,6 @@ static struct phy_driver lxt97x_driver[] = {
 	.probe		= lxt973_probe,
 	.config_aneg	= lxt973_config_aneg,
 	.read_status	= genphy_read_status,
-	.driver		= { .owner = THIS_MODULE,},
 } };
 
 module_phy_driver(lxt97x_driver);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 0240552b5..ab1d0fcaf 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -137,6 +137,22 @@ MODULE_DESCRIPTION("Marvell PHY driver");
 MODULE_AUTHOR("Andy Fleming");
 MODULE_LICENSE("GPL");
 
+struct marvell_hw_stat {
+	const char *string;
+	u8 page;
+	u8 reg;
+	u8 bits;
+};
+
+static struct marvell_hw_stat marvell_hw_stats[] = {
+	{ "phy_receive_errors", 0, 21, 16},
+	{ "phy_idle_errors", 0, 10, 8 },
+};
+
+struct marvell_priv {
+	u64 stats[ARRAY_SIZE(marvell_hw_stats)];
+};
+
 static int marvell_ack_interrupt(struct phy_device *phydev)
 {
 	int err;
@@ -284,10 +300,11 @@ static int marvell_of_reg_init(struct phy_device *phydev)
 	const __be32 *paddr;
 	int len, i, saved_page, current_page, page_changed, ret;
 
-	if (!phydev->dev.of_node)
+	if (!phydev->mdio.dev.of_node)
 		return 0;
 
-	paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len);
+	paddr = of_get_property(phydev->mdio.dev.of_node,
+				"marvell,reg-init", &len);
 	if (!paddr || len < (4 * sizeof(*paddr)))
 		return 0;
 
@@ -429,6 +446,12 @@ static int m88e1510_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
+	return 0;
+}
+
+static int marvell_config_init(struct phy_device *phydev)
+{
+	/* Set registers from marvell,reg-init DT property */
 	return marvell_of_reg_init(phydev);
 }
 
@@ -478,7 +501,7 @@ static int m88e1116r_config_init(struct phy_device *phydev)
 
 	mdelay(500);
 
-	return 0;
+	return marvell_config_init(phydev);
 }
 
 static int m88e3016_config_init(struct phy_device *phydev)
@@ -497,7 +520,7 @@ static int m88e3016_config_init(struct phy_device *phydev)
 	if (reg < 0)
 		return reg;
 
-	return 0;
+	return marvell_config_init(phydev);
 }
 
 static int m88e1111_config_init(struct phy_device *phydev)
@@ -986,20 +1009,91 @@ static int m88e1318_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *w
 	return 0;
 }
 
+static int marvell_get_sset_count(struct phy_device *phydev)
+{
+	return ARRAY_SIZE(marvell_hw_stats);
+}
+
+static void marvell_get_strings(struct phy_device *phydev, u8 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(marvell_hw_stats); i++) {
+		memcpy(data + i * ETH_GSTRING_LEN,
+		       marvell_hw_stats[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+#ifndef UINT64_MAX
+#define UINT64_MAX              (u64)(~((u64)0))
+#endif
+static u64 marvell_get_stat(struct phy_device *phydev, int i)
+{
+	struct marvell_hw_stat stat = marvell_hw_stats[i];
+	struct marvell_priv *priv = phydev->priv;
+	int err, oldpage;
+	u64 val;
+
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+			stat.page);
+	if (err < 0)
+		return UINT64_MAX;
+
+	val = phy_read(phydev, stat.reg);
+	if (val < 0) {
+		val = UINT64_MAX;
+	} else {
+		val = val & ((1 << stat.bits) - 1);
+		priv->stats[i] += val;
+		val = priv->stats[i];
+	}
+
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+
+	return val;
+}
+
+static void marvell_get_stats(struct phy_device *phydev,
+			      struct ethtool_stats *stats, u64 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(marvell_hw_stats); i++)
+		data[i] = marvell_get_stat(phydev, i);
+}
+
+static int marvell_probe(struct phy_device *phydev)
+{
+	struct marvell_priv *priv;
+
+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
 static struct phy_driver marvell_drivers[] = {
 	{
 		.phy_id = MARVELL_PHY_ID_88E1101,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1101",
 		.features = PHY_GBIT_FEATURES,
+		.probe = marvell_probe,
 		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &marvell_config_init,
 		.config_aneg = &marvell_config_aneg,
 		.read_status = &genphy_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1112,
@@ -1007,6 +1101,7 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1112",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
 		.config_aneg = &marvell_config_aneg,
 		.read_status = &genphy_read_status,
@@ -1014,7 +1109,9 @@ static struct phy_driver marvell_drivers[] = {
 		.config_intr = &marvell_config_intr,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1111,
@@ -1022,6 +1119,7 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1111",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
 		.config_aneg = &marvell_config_aneg,
 		.read_status = &marvell_read_status,
@@ -1029,7 +1127,9 @@ static struct phy_driver marvell_drivers[] = {
 		.config_intr = &marvell_config_intr,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1118,
@@ -1037,6 +1137,7 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1118",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
 		.config_init = &m88e1118_config_init,
 		.config_aneg = &m88e1118_config_aneg,
 		.read_status = &genphy_read_status,
@@ -1044,7 +1145,9 @@ static struct phy_driver marvell_drivers[] = {
 		.config_intr = &marvell_config_intr,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = {.owner = THIS_MODULE,},
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1121R,
@@ -1052,6 +1155,8 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1121R",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
+		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1121_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
@@ -1059,7 +1164,9 @@ static struct phy_driver marvell_drivers[] = {
 		.did_interrupt = &m88e1121_did_interrupt,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1318S,
@@ -1067,6 +1174,8 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1318S",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
+		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1318_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
@@ -1076,7 +1185,9 @@ static struct phy_driver marvell_drivers[] = {
 		.set_wol = &m88e1318_set_wol,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1145,
@@ -1084,6 +1195,7 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1145",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
 		.config_init = &m88e1145_config_init,
 		.config_aneg = &marvell_config_aneg,
 		.read_status = &genphy_read_status,
@@ -1091,7 +1203,9 @@ static struct phy_driver marvell_drivers[] = {
 		.config_intr = &marvell_config_intr,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1149R,
@@ -1099,6 +1213,7 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1149R",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
 		.config_init = &m88e1149_config_init,
 		.config_aneg = &m88e1118_config_aneg,
 		.read_status = &genphy_read_status,
@@ -1106,7 +1221,9 @@ static struct phy_driver marvell_drivers[] = {
 		.config_intr = &marvell_config_intr,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1240,
@@ -1114,6 +1231,7 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1240",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
 		.config_aneg = &marvell_config_aneg,
 		.read_status = &genphy_read_status,
@@ -1121,7 +1239,9 @@ static struct phy_driver marvell_drivers[] = {
 		.config_intr = &marvell_config_intr,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1116R,
@@ -1129,6 +1249,7 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1116R",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
 		.config_init = &m88e1116r_config_init,
 		.config_aneg = &genphy_config_aneg,
 		.read_status = &genphy_read_status,
@@ -1136,7 +1257,9 @@ static struct phy_driver marvell_drivers[] = {
 		.config_intr = &marvell_config_intr,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1510,
@@ -1144,6 +1267,8 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1510",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
+		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1510_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
@@ -1151,7 +1276,9 @@ static struct phy_driver marvell_drivers[] = {
 		.did_interrupt = &m88e1121_did_interrupt,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1540,
@@ -1159,6 +1286,8 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1540",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
+		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1510_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
@@ -1166,7 +1295,9 @@ static struct phy_driver marvell_drivers[] = {
 		.did_interrupt = &m88e1121_did_interrupt,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E3016,
@@ -1174,6 +1305,7 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E3016",
 		.features = PHY_BASIC_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
 		.config_aneg = &genphy_config_aneg,
 		.config_init = &m88e3016_config_init,
 		.aneg_done = &marvell_aneg_done,
@@ -1183,7 +1315,9 @@ static struct phy_driver marvell_drivers[] = {
 		.did_interrupt = &m88e1121_did_interrupt,
 		.resume = &genphy_resume,
 		.suspend = &genphy_suspend,
-		.driver = { .owner = THIS_MODULE },
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
 	},
 };
 
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
index 4bde5e728..8c73b2e77 100644
--- a/drivers/net/phy/mdio-bcm-unimac.c
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -200,16 +200,10 @@ static int unimac_mdio_probe(struct platform_device *pdev)
 	bus->reset = unimac_mdio_reset;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
 
-	bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
-	if (!bus->irq) {
-		ret = -ENOMEM;
-		goto out_mdio_free;
-	}
-
 	ret = of_mdiobus_register(bus, np);
 	if (ret) {
 		dev_err(&pdev->dev, "MDIO bus registration failed\n");
-		goto out_mdio_irq;
+		goto out_mdio_free;
 	}
 
 	platform_set_drvdata(pdev, priv);
@@ -218,8 +212,6 @@ static int unimac_mdio_probe(struct platform_device *pdev)
 
 	return 0;
 
-out_mdio_irq:
-	kfree(bus->irq);
 out_mdio_free:
 	mdiobus_free(bus);
 	return ret;
@@ -230,7 +222,6 @@ static int unimac_mdio_remove(struct platform_device *pdev)
 	struct unimac_mdio_priv *priv = platform_get_drvdata(pdev);
 
 	mdiobus_unregister(priv->mii_bus);
-	kfree(priv->mii_bus->irq);
 	mdiobus_free(priv->mii_bus);
 
 	return 0;
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 95f51d726..27ab63064 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -159,7 +159,7 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
 
 	new_bus->phy_mask = pdata->phy_mask;
 	new_bus->phy_ignore_ta_mask = pdata->phy_ignore_ta_mask;
-	new_bus->irq = pdata->irqs;
+	memcpy(new_bus->irq, pdata->irqs, sizeof(new_bus->irq));
 	new_bus->parent = dev;
 
 	if (new_bus->phy_mask == ~0)
diff --git a/drivers/net/phy/mdio-moxart.c b/drivers/net/phy/mdio-moxart.c
index f1fc51f65..5bb56d126 100644
--- a/drivers/net/phy/mdio-moxart.c
+++ b/drivers/net/phy/mdio-moxart.c
@@ -130,13 +130,6 @@ static int moxart_mdio_probe(struct platform_device *pdev)
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d-mii", pdev->name, pdev->id);
 	bus->parent = &pdev->dev;
 
-	bus->irq = devm_kzalloc(&pdev->dev, sizeof(int) * PHY_MAX_ADDR,
-			GFP_KERNEL);
-	if (!bus->irq) {
-		ret = -ENOMEM;
-		goto err_out_free_mdiobus;
-	}
-
 	/* Setting PHY_IGNORE_INTERRUPT here even if it has no effect,
 	 * of_mdiobus_register() sets these PHY_POLL.
 	 * Ideally, the interrupt from MAC controller could be used to
diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c
index 7f8e7662e..308ade0eb 100644
--- a/drivers/net/phy/mdio-mux.c
+++ b/drivers/net/phy/mdio-mux.c
@@ -34,7 +34,6 @@ struct mdio_mux_child_bus {
 	struct mdio_mux_parent_bus *parent;
 	struct mdio_mux_child_bus *next;
 	int bus_number;
-	int phy_irq[PHY_MAX_ADDR];
 };
 
 /*
@@ -157,7 +156,7 @@ int mdio_mux_init(struct device *dev,
 			break;
 		}
 		cb->mii_bus->priv = cb;
-		cb->mii_bus->irq = cb->phy_irq;
+
 		cb->mii_bus->name = "mdio_mux";
 		snprintf(cb->mii_bus->id, MII_BUS_ID_SIZE, "%x.%x",
 			 pb->parent_id, v);
diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c
index fcf4e4df7..47d4f2f26 100644
--- a/drivers/net/phy/mdio-octeon.c
+++ b/drivers/net/phy/mdio-octeon.c
@@ -113,7 +113,6 @@ struct octeon_mdiobus {
 	resource_size_t mdio_phys;
 	resource_size_t regsize;
 	enum octeon_mdiobus_mode mode;
-	int phy_irq[PHY_MAX_ADDR];
 };
 
 #ifdef CONFIG_CAVIUM_OCTEON_SOC
@@ -268,12 +267,13 @@ static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id,
 static int octeon_mdiobus_probe(struct platform_device *pdev)
 {
 	struct octeon_mdiobus *bus;
+	struct mii_bus *mii_bus;
 	struct resource *res_mem;
 	union cvmx_smix_en smi_en;
 	int err = -ENOENT;
 
-	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
-	if (!bus)
+	mii_bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*bus));
+	if (!mii_bus)
 		return -ENOMEM;
 
 	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -282,6 +282,8 @@ static int octeon_mdiobus_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
+	bus = mii_bus->priv;
+	bus->mii_bus = mii_bus;
 	bus->mdio_phys = res_mem->start;
 	bus->regsize = resource_size(res_mem);
 
@@ -298,16 +300,11 @@ static int octeon_mdiobus_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	bus->mii_bus = mdiobus_alloc();
-	if (!bus->mii_bus)
-		goto fail;
-
 	smi_en.u64 = 0;
 	smi_en.s.en = 1;
 	oct_mdio_writeq(smi_en.u64, bus->register_base + SMI_EN);
 
 	bus->mii_bus->priv = bus;
-	bus->mii_bus->irq = bus->phy_irq;
 	bus->mii_bus->name = "mdio-octeon";
 	snprintf(bus->mii_bus->id, MII_BUS_ID_SIZE, "%llx", bus->register_base);
 	bus->mii_bus->parent = &pdev->dev;
@@ -326,7 +323,6 @@ static int octeon_mdiobus_probe(struct platform_device *pdev)
 	return 0;
 fail_register:
 	mdiobus_free(bus->mii_bus);
-fail:
 	smi_en.u64 = 0;
 	oct_mdio_writeq(smi_en.u64, bus->register_base + SMI_EN);
 	return err;
diff --git a/drivers/net/phy/mdio-sun4i.c b/drivers/net/phy/mdio-sun4i.c
index 15bc7f9ea..f70522c35 100644
--- a/drivers/net/phy/mdio-sun4i.c
+++ b/drivers/net/phy/mdio-sun4i.c
@@ -96,7 +96,7 @@ static int sun4i_mdio_probe(struct platform_device *pdev)
 	struct mii_bus *bus;
 	struct sun4i_mdio_data *data;
 	struct resource *res;
-	int ret, i;
+	int ret;
 
 	bus = mdiobus_alloc_size(sizeof(*data));
 	if (!bus)
@@ -108,16 +108,6 @@ static int sun4i_mdio_probe(struct platform_device *pdev)
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
 	bus->parent = &pdev->dev;
 
-	bus->irq = devm_kzalloc(&pdev->dev, sizeof(int) * PHY_MAX_ADDR,
-			GFP_KERNEL);
-	if (!bus->irq) {
-		ret = -ENOMEM;
-		goto err_out_free_mdiobus;
-	}
-
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		bus->irq[i] = PHY_POLL;
-
 	data = bus->priv;
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	data->membase = devm_ioremap_resource(&pdev->dev, res);
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 88cb4592b..0cba64f1e 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -38,6 +38,48 @@
 
 #include <asm/irq.h>
 
+int mdiobus_register_device(struct mdio_device *mdiodev)
+{
+	if (mdiodev->bus->mdio_map[mdiodev->addr])
+		return -EBUSY;
+
+	mdiodev->bus->mdio_map[mdiodev->addr] = mdiodev;
+
+	return 0;
+}
+EXPORT_SYMBOL(mdiobus_register_device);
+
+int mdiobus_unregister_device(struct mdio_device *mdiodev)
+{
+	if (mdiodev->bus->mdio_map[mdiodev->addr] != mdiodev)
+		return -EINVAL;
+
+	mdiodev->bus->mdio_map[mdiodev->addr] = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(mdiobus_unregister_device);
+
+struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr)
+{
+	struct mdio_device *mdiodev = bus->mdio_map[addr];
+
+	if (!mdiodev)
+		return NULL;
+
+	if (!(mdiodev->flags & MDIO_DEVICE_FLAG_PHY))
+		return NULL;
+
+	return container_of(mdiodev, struct phy_device, mdio);
+}
+EXPORT_SYMBOL(mdiobus_get_phy);
+
+bool mdiobus_is_registered_device(struct mii_bus *bus, int addr)
+{
+	return bus->mdio_map[addr];
+}
+EXPORT_SYMBOL(mdiobus_is_registered_device);
+
 /**
  * mdiobus_alloc_size - allocate a mii_bus structure
  * @size: extra amount of memory to allocate for private storage.
@@ -51,6 +93,7 @@ struct mii_bus *mdiobus_alloc_size(size_t size)
 	struct mii_bus *bus;
 	size_t aligned_size = ALIGN(sizeof(*bus), NETDEV_ALIGN);
 	size_t alloc_size;
+	int i;
 
 	/* If we alloc extra space, it should be aligned */
 	if (size)
@@ -59,11 +102,16 @@ struct mii_bus *mdiobus_alloc_size(size_t size)
 		alloc_size = sizeof(*bus);
 
 	bus = kzalloc(alloc_size, GFP_KERNEL);
-	if (bus) {
-		bus->state = MDIOBUS_ALLOCATED;
-		if (size)
-			bus->priv = (void *)bus + aligned_size;
-	}
+	if (!bus)
+		return NULL;
+
+	bus->state = MDIOBUS_ALLOCATED;
+	if (size)
+		bus->priv = (void *)bus + aligned_size;
+
+	/* Initialise the interrupts to polling */
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		bus->irq[i] = PHY_POLL;
 
 	return bus;
 }
@@ -190,47 +238,48 @@ struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np)
 }
 EXPORT_SYMBOL(of_mdio_find_bus);
 
-/* Walk the list of subnodes of a mdio bus and look for a node that matches the
- * phy's address with its 'reg' property. If found, set the of_node pointer for
- * the phy. This allows auto-probed pyh devices to be supplied with information
- * passed in via DT.
+/* Walk the list of subnodes of a mdio bus and look for a node that
+ * matches the mdio device's address with its 'reg' property. If
+ * found, set the of_node pointer for the mdio device. This allows
+ * auto-probed phy devices to be supplied with information passed in
+ * via DT.
  */
-static void of_mdiobus_link_phydev(struct mii_bus *mdio,
-				   struct phy_device *phydev)
+static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
+				    struct mdio_device *mdiodev)
 {
-	struct device *dev = &phydev->dev;
+	struct device *dev = &mdiodev->dev;
 	struct device_node *child;
 
-	if (dev->of_node || !mdio->dev.of_node)
+	if (dev->of_node || !bus->dev.of_node)
 		return;
 
-	for_each_available_child_of_node(mdio->dev.of_node, child) {
+	for_each_available_child_of_node(bus->dev.of_node, child) {
 		int addr;
 		int ret;
 
 		ret = of_property_read_u32(child, "reg", &addr);
 		if (ret < 0) {
-			dev_err(dev, "%s has invalid PHY address\n",
+			dev_err(dev, "%s has invalid MDIO address\n",
 				child->full_name);
 			continue;
 		}
 
-		/* A PHY must have a reg property in the range [0-31] */
+		/* A MDIO device must have a reg property in the range [0-31] */
 		if (addr >= PHY_MAX_ADDR) {
-			dev_err(dev, "%s PHY address %i is too large\n",
+			dev_err(dev, "%s MDIO address %i is too large\n",
 				child->full_name, addr);
 			continue;
 		}
 
-		if (addr == phydev->addr) {
+		if (addr == mdiodev->addr) {
 			dev->of_node = child;
 			return;
 		}
 	}
 }
 #else /* !IS_ENABLED(CONFIG_OF_MDIO) */
-static inline void of_mdiobus_link_phydev(struct mii_bus *mdio,
-					  struct phy_device *phydev)
+static inline void of_mdiobus_link_mdiodev(struct mii_bus *mdio,
+					   struct mdio_device *mdiodev)
 {
 }
 #endif
@@ -243,12 +292,15 @@ static inline void of_mdiobus_link_phydev(struct mii_bus *mdio,
  * Description: Called by a bus driver to bring up all the PHYs
  *   on a given bus, and attach them to the bus. Drivers should use
  *   mdiobus_register() rather than __mdiobus_register() unless they
- *   need to pass a specific owner module.
+ *   need to pass a specific owner module. MDIO devices which are not
+ *   PHYs will not be brought up by this function. They are expected to
+ *   to be explicitly listed in DT and instantiated by of_mdiobus_register().
  *
  * Returns 0 on success or < 0 on error.
  */
 int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 {
+	struct mdio_device *mdiodev;
 	int i, err;
 
 	if (NULL == bus || NULL == bus->name ||
@@ -294,11 +346,12 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 
 error:
 	while (--i >= 0) {
-		struct phy_device *phydev = bus->phy_map[i];
-		if (phydev) {
-			phy_device_remove(phydev);
-			phy_device_free(phydev);
-		}
+		mdiodev = bus->mdio_map[i];
+		if (!mdiodev)
+			continue;
+
+		mdiodev->device_remove(mdiodev);
+		mdiodev->device_free(mdiodev);
 	}
 	device_del(&bus->dev);
 	return err;
@@ -307,17 +360,19 @@ EXPORT_SYMBOL(__mdiobus_register);
 
 void mdiobus_unregister(struct mii_bus *bus)
 {
+	struct mdio_device *mdiodev;
 	int i;
 
 	BUG_ON(bus->state != MDIOBUS_REGISTERED);
 	bus->state = MDIOBUS_UNREGISTERED;
 
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
-		struct phy_device *phydev = bus->phy_map[i];
-		if (phydev) {
-			phy_device_remove(phydev);
-			phy_device_free(phydev);
-		}
+		mdiodev = bus->mdio_map[i];
+		if (!mdiodev)
+			continue;
+
+		mdiodev->device_remove(mdiodev);
+		mdiodev->device_free(mdiodev);
 	}
 	device_del(&bus->dev);
 }
@@ -346,6 +401,18 @@ void mdiobus_free(struct mii_bus *bus)
 }
 EXPORT_SYMBOL(mdiobus_free);
 
+/**
+ * mdiobus_scan - scan a bus for MDIO devices.
+ * @bus: mii_bus to scan
+ * @addr: address on bus to scan
+ *
+ * This function scans the MDIO bus, looking for devices which can be
+ * identified using a vendor/product ID in registers 2 and 3. Not all
+ * MDIO devices have such registers, but PHY devices typically
+ * do. Hence this function assumes anything found is a PHY, or can be
+ * treated as a PHY. Other MDIO devices, such as switches, will
+ * probably not be found during the scan.
+ */
 struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
 {
 	struct phy_device *phydev;
@@ -359,7 +426,7 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
 	 * For DT, see if the auto-probed phy has a correspoding child
 	 * in the bus node, and set the of_node pointer in this case.
 	 */
-	of_mdiobus_link_phydev(bus, phydev);
+	of_mdiobus_link_mdiodev(bus, &phydev->mdio);
 
 	err = phy_device_register(phydev);
 	if (err) {
@@ -476,133 +543,56 @@ int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val)
 EXPORT_SYMBOL(mdiobus_write);
 
 /**
- * mdio_bus_match - determine if given PHY driver supports the given PHY device
- * @dev: target PHY device
- * @drv: given PHY driver
+ * mdio_bus_match - determine if given MDIO driver supports the given
+ *		    MDIO device
+ * @dev: target MDIO device
+ * @drv: given MDIO driver
  *
- * Description: Given a PHY device, and a PHY driver, return 1 if
- *   the driver supports the device.  Otherwise, return 0.
+ * Description: Given a MDIO device, and a MDIO driver, return 1 if
+ *   the driver supports the device.  Otherwise, return 0. This may
+ *   require calling the devices own match function, since different classes
+ *   of MDIO devices have different match criteria.
  */
 static int mdio_bus_match(struct device *dev, struct device_driver *drv)
 {
-	struct phy_device *phydev = to_phy_device(dev);
-	struct phy_driver *phydrv = to_phy_driver(drv);
-	const int num_ids = ARRAY_SIZE(phydev->c45_ids.device_ids);
-	int i;
+	struct mdio_device *mdio = to_mdio_device(dev);
 
 	if (of_driver_match_device(dev, drv))
 		return 1;
 
-	if (phydrv->match_phy_device)
-		return phydrv->match_phy_device(phydev);
-
-	if (phydev->is_c45) {
-		for (i = 1; i < num_ids; i++) {
-			if (!(phydev->c45_ids.devices_in_package & (1 << i)))
-				continue;
+	if (mdio->bus_match)
+		return mdio->bus_match(dev, drv);
 
-			if ((phydrv->phy_id & phydrv->phy_id_mask) ==
-			    (phydev->c45_ids.device_ids[i] &
-			     phydrv->phy_id_mask))
-				return 1;
-		}
-		return 0;
-	} else {
-		return (phydrv->phy_id & phydrv->phy_id_mask) ==
-			(phydev->phy_id & phydrv->phy_id_mask);
-	}
+	return 0;
 }
 
 #ifdef CONFIG_PM
-
-static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
-{
-	struct device_driver *drv = phydev->dev.driver;
-	struct phy_driver *phydrv = to_phy_driver(drv);
-	struct net_device *netdev = phydev->attached_dev;
-
-	if (!drv || !phydrv->suspend)
-		return false;
-
-	/* PHY not attached? May suspend if the PHY has not already been
-	 * suspended as part of a prior call to phy_disconnect() ->
-	 * phy_detach() -> phy_suspend() because the parent netdev might be the
-	 * MDIO bus driver and clock gated at this point.
-	 */
-	if (!netdev)
-		return !phydev->suspended;
-
-	/* Don't suspend PHY if the attched netdev parent may wakeup.
-	 * The parent may point to a PCI device, as in tg3 driver.
-	 */
-	if (netdev->dev.parent && device_may_wakeup(netdev->dev.parent))
-		return false;
-
-	/* Also don't suspend PHY if the netdev itself may wakeup. This
-	 * is the case for devices w/o underlaying pwr. mgmt. aware bus,
-	 * e.g. SoC devices.
-	 */
-	if (device_may_wakeup(&netdev->dev))
-		return false;
-
-	return true;
-}
-
 static int mdio_bus_suspend(struct device *dev)
 {
-	struct phy_device *phydev = to_phy_device(dev);
+	struct mdio_device *mdio = to_mdio_device(dev);
 
-	/* We must stop the state machine manually, otherwise it stops out of
-	 * control, possibly with the phydev->lock held. Upon resume, netdev
-	 * may call phy routines that try to grab the same lock, and that may
-	 * lead to a deadlock.
-	 */
-	if (phydev->attached_dev && phydev->adjust_link)
-		phy_stop_machine(phydev);
+	if (mdio->pm_ops && mdio->pm_ops->suspend)
+		return mdio->pm_ops->suspend(dev);
 
-	if (!mdio_bus_phy_may_suspend(phydev))
-		return 0;
-
-	return phy_suspend(phydev);
+	return 0;
 }
 
 static int mdio_bus_resume(struct device *dev)
 {
-	struct phy_device *phydev = to_phy_device(dev);
-	int ret;
-
-	if (!mdio_bus_phy_may_suspend(phydev))
-		goto no_resume;
-
-	ret = phy_resume(phydev);
-	if (ret < 0)
-		return ret;
+	struct mdio_device *mdio = to_mdio_device(dev);
 
-no_resume:
-	if (phydev->attached_dev && phydev->adjust_link)
-		phy_start_machine(phydev);
+	if (mdio->pm_ops && mdio->pm_ops->resume)
+		return mdio->pm_ops->resume(dev);
 
 	return 0;
 }
 
 static int mdio_bus_restore(struct device *dev)
 {
-	struct phy_device *phydev = to_phy_device(dev);
-	struct net_device *netdev = phydev->attached_dev;
-	int ret;
-
-	if (!netdev)
-		return 0;
+	struct mdio_device *mdio = to_mdio_device(dev);
 
-	ret = phy_init_hw(phydev);
-	if (ret < 0)
-		return ret;
-
-	/* The PHY needs to renegotiate. */
-	phydev->link = 0;
-	phydev->state = PHY_UP;
-
-	phy_start_machine(phydev);
+	if (mdio->pm_ops && mdio->pm_ops->restore)
+		return mdio->pm_ops->restore(dev);
 
 	return 0;
 }
@@ -623,52 +613,10 @@ static const struct dev_pm_ops mdio_bus_pm_ops = {
 
 #endif /* CONFIG_PM */
 
-static ssize_t
-phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct phy_device *phydev = to_phy_device(dev);
-
-	return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id);
-}
-static DEVICE_ATTR_RO(phy_id);
-
-static ssize_t
-phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct phy_device *phydev = to_phy_device(dev);
-	const char *mode = NULL;
-
-	if (phy_is_internal(phydev))
-		mode = "internal";
-	else
-		mode = phy_modes(phydev->interface);
-
-	return sprintf(buf, "%s\n", mode);
-}
-static DEVICE_ATTR_RO(phy_interface);
-
-static ssize_t
-phy_has_fixups_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct phy_device *phydev = to_phy_device(dev);
-
-	return sprintf(buf, "%d\n", phydev->has_fixups);
-}
-static DEVICE_ATTR_RO(phy_has_fixups);
-
-static struct attribute *mdio_dev_attrs[] = {
-	&dev_attr_phy_id.attr,
-	&dev_attr_phy_interface.attr,
-	&dev_attr_phy_has_fixups.attr,
-	NULL,
-};
-ATTRIBUTE_GROUPS(mdio_dev);
-
 struct bus_type mdio_bus_type = {
 	.name		= "mdio_bus",
 	.match		= mdio_bus_match,
 	.pm		= MDIO_BUS_PM_OPS,
-	.dev_groups	= mdio_dev_groups,
 };
 EXPORT_SYMBOL(mdio_bus_type);
 
diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
new file mode 100644
index 000000000..9c88e6749
--- /dev/null
+++ b/drivers/net/phy/mdio_device.c
@@ -0,0 +1,171 @@
+/* Framework for MDIO devices, other than PHYs.
+ *
+ * Copyright (c) 2016 Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mdio.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/unistd.h>
+
+void mdio_device_free(struct mdio_device *mdiodev)
+{
+	put_device(&mdiodev->dev);
+}
+EXPORT_SYMBOL(mdio_device_free);
+
+static void mdio_device_release(struct device *dev)
+{
+	kfree(to_mdio_device(dev));
+}
+
+struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr)
+{
+	struct mdio_device *mdiodev;
+
+	/* We allocate the device, and initialize the default values */
+	mdiodev = kzalloc(sizeof(*mdiodev), GFP_KERNEL);
+	if (!mdiodev)
+		return ERR_PTR(-ENOMEM);
+
+	mdiodev->dev.release = mdio_device_release;
+	mdiodev->dev.parent = &bus->dev;
+	mdiodev->dev.bus = &mdio_bus_type;
+	mdiodev->device_free = mdio_device_free;
+	mdiodev->device_remove = mdio_device_remove;
+	mdiodev->bus = bus;
+	mdiodev->addr = addr;
+
+	dev_set_name(&mdiodev->dev, PHY_ID_FMT, bus->id, addr);
+
+	device_initialize(&mdiodev->dev);
+
+	return mdiodev;
+}
+EXPORT_SYMBOL(mdio_device_create);
+
+/**
+ * mdio_device_register - Register the mdio device on the MDIO bus
+ * @mdiodev: mdio_device structure to be added to the MDIO bus
+ */
+int mdio_device_register(struct mdio_device *mdiodev)
+{
+	int err;
+
+	dev_info(&mdiodev->dev, "mdio_device_register\n");
+
+	err = mdiobus_register_device(mdiodev);
+	if (err)
+		return err;
+
+	err = device_add(&mdiodev->dev);
+	if (err) {
+		pr_err("MDIO %d failed to add\n", mdiodev->addr);
+		goto out;
+	}
+
+	return 0;
+
+ out:
+	mdiobus_unregister_device(mdiodev);
+	return err;
+}
+EXPORT_SYMBOL(mdio_device_register);
+
+/**
+ * mdio_device_remove - Remove a previously registered mdio device from the
+ *			MDIO bus
+ * @mdiodev: mdio_device structure to remove
+ *
+ * This doesn't free the mdio_device itself, it merely reverses the effects
+ * of mdio_device_register(). Use mdio_device_free() to free the device
+ * after calling this function.
+ */
+void mdio_device_remove(struct mdio_device *mdiodev)
+{
+	device_del(&mdiodev->dev);
+	mdiobus_unregister_device(mdiodev);
+}
+EXPORT_SYMBOL(mdio_device_remove);
+
+/**
+ * mdio_probe - probe an MDIO device
+ * @dev: device to probe
+ *
+ * Description: Take care of setting up the mdio_device structure
+ * and calling the driver to probe the device.
+ */
+static int mdio_probe(struct device *dev)
+{
+	struct mdio_device *mdiodev = to_mdio_device(dev);
+	struct device_driver *drv = mdiodev->dev.driver;
+	struct mdio_driver *mdiodrv = to_mdio_driver(drv);
+	int err = 0;
+
+	if (mdiodrv->probe)
+		err = mdiodrv->probe(mdiodev);
+
+	return err;
+}
+
+static int mdio_remove(struct device *dev)
+{
+	struct mdio_device *mdiodev = to_mdio_device(dev);
+	struct device_driver *drv = mdiodev->dev.driver;
+	struct mdio_driver *mdiodrv = to_mdio_driver(drv);
+
+	if (mdiodrv->remove)
+		mdiodrv->remove(mdiodev);
+
+	return 0;
+}
+
+/**
+ * mdio_driver_register - register an mdio_driver with the MDIO layer
+ * @new_driver: new mdio_driver to register
+ */
+int mdio_driver_register(struct mdio_driver *drv)
+{
+	struct mdio_driver_common *mdiodrv = &drv->mdiodrv;
+	int retval;
+
+	pr_info("mdio_driver_register: %s\n", mdiodrv->driver.name);
+
+	mdiodrv->driver.bus = &mdio_bus_type;
+	mdiodrv->driver.probe = mdio_probe;
+	mdiodrv->driver.remove = mdio_remove;
+
+	retval = driver_register(&mdiodrv->driver);
+	if (retval) {
+		pr_err("%s: Error %d in registering driver\n",
+		       mdiodrv->driver.name, retval);
+
+		return retval;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mdio_driver_register);
+
+void mdio_driver_unregister(struct mdio_driver *drv)
+{
+	struct mdio_driver_common *mdiodrv = &drv->mdiodrv;
+
+	driver_unregister(&mdiodrv->driver);
+}
+EXPORT_SYMBOL(mdio_driver_unregister);
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index e13ad6cdc..dc85f7095 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -73,6 +73,17 @@
 
 #define PS_TO_REG				200
 
+struct kszphy_hw_stat {
+	const char *string;
+	u8 reg;
+	u8 bits;
+};
+
+static struct kszphy_hw_stat kszphy_hw_stats[] = {
+	{ "phy_receive_errors", 21, 16},
+	{ "phy_idle_errors", 10, 8 },
+};
+
 struct kszphy_type {
 	u32 led_mode_reg;
 	u16 interrupt_level_mask;
@@ -86,6 +97,7 @@ struct kszphy_priv {
 	int led_mode;
 	bool rmii_ref_clk_sel;
 	bool rmii_ref_clk_sel_val;
+	u64 stats[ARRAY_SIZE(kszphy_hw_stats)];
 };
 
 static const struct kszphy_type ksz8021_type = {
@@ -212,7 +224,7 @@ static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val)
 	rc = phy_write(phydev, reg, temp);
 out:
 	if (rc < 0)
-		dev_err(&phydev->dev, "failed to set led mode\n");
+		phydev_err(phydev, "failed to set led mode\n");
 
 	return rc;
 }
@@ -231,7 +243,7 @@ static int kszphy_broadcast_disable(struct phy_device *phydev)
 	ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF);
 out:
 	if (ret)
-		dev_err(&phydev->dev, "failed to disable broadcast address\n");
+		phydev_err(phydev, "failed to disable broadcast address\n");
 
 	return ret;
 }
@@ -251,7 +263,7 @@ static int kszphy_nand_tree_disable(struct phy_device *phydev)
 			ret & ~KSZPHY_OMSO_NAND_TREE_ON);
 out:
 	if (ret)
-		dev_err(&phydev->dev, "failed to disable NAND tree mode\n");
+		phydev_err(phydev, "failed to disable NAND tree mode\n");
 
 	return ret;
 }
@@ -276,7 +288,8 @@ static int kszphy_config_init(struct phy_device *phydev)
 	if (priv->rmii_ref_clk_sel) {
 		ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
 		if (ret) {
-			dev_err(&phydev->dev, "failed to set rmii reference clock\n");
+			phydev_err(phydev,
+				   "failed to set rmii reference clock\n");
 			return ret;
 		}
 	}
@@ -284,6 +297,17 @@ static int kszphy_config_init(struct phy_device *phydev)
 	if (priv->led_mode >= 0)
 		kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
 
+	if (phy_interrupt_is_valid(phydev)) {
+		int ctl = phy_read(phydev, MII_BMCR);
+
+		if (ctl < 0)
+			return ctl;
+
+		ret = phy_write(phydev, MII_BMCR, ctl & ~BMCR_ANENABLE);
+		if (ret < 0)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -337,7 +361,7 @@ static int ksz9021_load_values_from_of(struct phy_device *phydev,
 
 static int ksz9021_config_init(struct phy_device *phydev)
 {
-	const struct device *dev = &phydev->dev;
+	const struct device *dev = &phydev->mdio.dev;
 	const struct device_node *of_node = dev->of_node;
 	const struct device *dev_walker;
 
@@ -345,7 +369,7 @@ static int ksz9021_config_init(struct phy_device *phydev)
 	 * properties in the MAC node. Walk up the tree of devices to
 	 * find a device with an OF node.
 	 */
-	dev_walker = &phydev->dev;
+	dev_walker = &phydev->mdio.dev;
 	do {
 		of_node = dev_walker->of_node;
 		dev_walker = dev_walker->parent;
@@ -458,7 +482,7 @@ static int ksz9031_center_flp_timing(struct phy_device *phydev)
 
 static int ksz9031_config_init(struct phy_device *phydev)
 {
-	const struct device *dev = &phydev->dev;
+	const struct device *dev = &phydev->mdio.dev;
 	const struct device_node *of_node = dev->of_node;
 	static const char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
 	static const char *rx_data_skews[4] = {
@@ -470,9 +494,17 @@ static int ksz9031_config_init(struct phy_device *phydev)
 		"txd2-skew-ps", "txd3-skew-ps"
 	};
 	static const char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
+	const struct device *dev_walker;
 
-	if (!of_node && dev->parent->of_node)
-		of_node = dev->parent->of_node;
+	/* The Micrel driver has a deprecated option to place phy OF
+	 * properties in the MAC node. Walk up the tree of devices to
+	 * find a device with an OF node.
+	 */
+	dev_walker = &phydev->mdio.dev;
+	do {
+		of_node = dev_walker->of_node;
+		dev_walker = dev_walker->parent;
+	} while (!of_node && dev_walker);
 
 	if (of_node) {
 		ksz9031_of_load_skew_values(phydev, of_node,
@@ -569,15 +601,75 @@ ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum,
 {
 }
 
+static int kszphy_get_sset_count(struct phy_device *phydev)
+{
+	return ARRAY_SIZE(kszphy_hw_stats);
+}
+
+static void kszphy_get_strings(struct phy_device *phydev, u8 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kszphy_hw_stats); i++) {
+		memcpy(data + i * ETH_GSTRING_LEN,
+		       kszphy_hw_stats[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+#ifndef UINT64_MAX
+#define UINT64_MAX              (u64)(~((u64)0))
+#endif
+static u64 kszphy_get_stat(struct phy_device *phydev, int i)
+{
+	struct kszphy_hw_stat stat = kszphy_hw_stats[i];
+	struct kszphy_priv *priv = phydev->priv;
+	u64 val;
+
+	val = phy_read(phydev, stat.reg);
+	if (val < 0) {
+		val = UINT64_MAX;
+	} else {
+		val = val & ((1 << stat.bits) - 1);
+		priv->stats[i] += val;
+		val = priv->stats[i];
+	}
+
+	return val;
+}
+
+static void kszphy_get_stats(struct phy_device *phydev,
+			     struct ethtool_stats *stats, u64 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kszphy_hw_stats); i++)
+		data[i] = kszphy_get_stat(phydev, i);
+}
+
+static int kszphy_resume(struct phy_device *phydev)
+{
+	int value;
+
+	mutex_lock(&phydev->lock);
+
+	value = phy_read(phydev, MII_BMCR);
+	phy_write(phydev, MII_BMCR, value & ~BMCR_PDOWN);
+
+	kszphy_config_intr(phydev);
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+}
+
 static int kszphy_probe(struct phy_device *phydev)
 {
 	const struct kszphy_type *type = phydev->drv->driver_data;
-	const struct device_node *np = phydev->dev.of_node;
+	const struct device_node *np = phydev->mdio.dev.of_node;
 	struct kszphy_priv *priv;
 	struct clk *clk;
 	int ret;
 
-	priv = devm_kzalloc(&phydev->dev, sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
@@ -592,15 +684,15 @@ static int kszphy_probe(struct phy_device *phydev)
 			priv->led_mode = -1;
 
 		if (priv->led_mode > 3) {
-			dev_err(&phydev->dev, "invalid led mode: 0x%02x\n",
-					priv->led_mode);
+			phydev_err(phydev, "invalid led mode: 0x%02x\n",
+				   priv->led_mode);
 			priv->led_mode = -1;
 		}
 	} else {
 		priv->led_mode = -1;
 	}
 
-	clk = devm_clk_get(&phydev->dev, "rmii-ref");
+	clk = devm_clk_get(&phydev->mdio.dev, "rmii-ref");
 	/* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */
 	if (!IS_ERR_OR_NULL(clk)) {
 		unsigned long rate = clk_get_rate(clk);
@@ -615,7 +707,8 @@ static int kszphy_probe(struct phy_device *phydev)
 		} else if (rate > 49500000 && rate < 50500000) {
 			priv->rmii_ref_clk_sel_val = !rmii_ref_clk_sel_25_mhz;
 		} else {
-			dev_err(&phydev->dev, "Clock rate out of range: %ld\n", rate);
+			phydev_err(phydev, "Clock rate out of range: %ld\n",
+				   rate);
 			return -EINVAL;
 		}
 	}
@@ -642,9 +735,11 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8021,
 	.phy_id_mask	= 0x00ffffff,
@@ -659,9 +754,11 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8031,
 	.phy_id_mask	= 0x00ffffff,
@@ -676,9 +773,11 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8041,
 	.phy_id_mask	= 0x00fffff0,
@@ -693,9 +792,11 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8041RNLI,
 	.phy_id_mask	= 0x00fffff0,
@@ -710,9 +811,11 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8051,
 	.phy_id_mask	= 0x00fffff0,
@@ -727,9 +830,11 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8001,
 	.name		= "Micrel KSZ8001 or KS8721",
@@ -743,9 +848,11 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8081,
 	.name		= "Micrel KSZ8081 or KSZ8091",
@@ -759,9 +866,11 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
-	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
+	.resume		= kszphy_resume,
 }, {
 	.phy_id		= PHY_ID_KSZ8061,
 	.name		= "Micrel KSZ8061",
@@ -773,9 +882,11 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ9021,
 	.phy_id_mask	= 0x000ffffe,
@@ -788,11 +899,13 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 	.read_mmd_indirect = ksz9021_rd_mmd_phyreg,
 	.write_mmd_indirect = ksz9021_wr_mmd_phyreg,
-	.driver		= { .owner = THIS_MODULE, },
 }, {
 	.phy_id		= PHY_ID_KSZ9031,
 	.phy_id_mask	= 0x00fffff0,
@@ -805,9 +918,11 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= ksz9031_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE, },
 }, {
 	.phy_id		= PHY_ID_KSZ8873MLL,
 	.phy_id_mask	= 0x00fffff0,
@@ -817,9 +932,11 @@ static struct phy_driver ksphy_driver[] = {
 	.config_init	= kszphy_config_init,
 	.config_aneg	= ksz8873mll_config_aneg,
 	.read_status	= ksz8873mll_read_status,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE, },
 }, {
 	.phy_id		= PHY_ID_KSZ886X,
 	.phy_id_mask	= 0x00fffff0,
@@ -829,9 +946,11 @@ static struct phy_driver ksphy_driver[] = {
 	.config_init	= kszphy_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE, },
 } };
 
 module_phy_driver(ksphy_driver);
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index c0a20ebd0..15f820648 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -68,7 +68,7 @@ int lan88xx_suspend(struct phy_device *phydev)
 
 static int lan88xx_probe(struct phy_device *phydev)
 {
-	struct device *dev = &phydev->dev;
+	struct device *dev = &phydev->mdio.dev;
 	struct lan88xx_priv *priv;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -78,10 +78,9 @@ static int lan88xx_probe(struct phy_device *phydev)
 	priv->wolopts = 0;
 
 	/* these values can be used to identify internal PHY */
-	priv->chip_id = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_ID,
-					      3, phydev->addr);
+	priv->chip_id = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_ID, 3);
 	priv->chip_rev = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_REV,
-					       3, phydev->addr);
+					       3);
 
 	phydev->priv = priv;
 
@@ -90,7 +89,7 @@ static int lan88xx_probe(struct phy_device *phydev)
 
 static void lan88xx_remove(struct phy_device *phydev)
 {
-	struct device *dev = &phydev->dev;
+	struct device *dev = &phydev->mdio.dev;
 	struct lan88xx_priv *priv = phydev->priv;
 
 	if (priv)
@@ -130,8 +129,6 @@ static struct phy_driver microchip_phy_driver[] = {
 	.suspend	= lan88xx_suspend,
 	.resume		= genphy_resume,
 	.set_wol	= lan88xx_set_wol,
-
-	.driver		= { .owner = THIS_MODULE, }
 } };
 
 module_phy_driver(microchip_phy_driver);
diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c
index 0a7b9c7f0..2a1b490bc 100644
--- a/drivers/net/phy/national.c
+++ b/drivers/net/phy/national.c
@@ -140,7 +140,6 @@ static struct phy_driver dp83865_driver[] = { {
 	.read_status = genphy_read_status,
 	.ack_interrupt = ns_ack_interrupt,
 	.config_intr = ns_config_intr,
-	.driver = {.owner = THIS_MODULE,}
 } };
 
 module_phy_driver(dp83865_driver);
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 47cd306db..5590b9c18 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -319,7 +319,7 @@ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 {
 	u32 speed = ethtool_cmd_speed(cmd);
 
-	if (cmd->phy_address != phydev->addr)
+	if (cmd->phy_address != phydev->mdio.addr)
 		return -EINVAL;
 
 	/* We make sure that we don't pass unsupported values in to the PHY */
@@ -375,7 +375,7 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 		cmd->port = PORT_BNC;
 	else
 		cmd->port = PORT_MII;
-	cmd->phy_address = phydev->addr;
+	cmd->phy_address = phydev->mdio.addr;
 	cmd->transceiver = phy_is_internal(phydev) ?
 		XCVR_INTERNAL : XCVR_EXTERNAL;
 	cmd->autoneg = phydev->autoneg;
@@ -403,16 +403,17 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
 
 	switch (cmd) {
 	case SIOCGMIIPHY:
-		mii_data->phy_id = phydev->addr;
+		mii_data->phy_id = phydev->mdio.addr;
 		/* fall through */
 
 	case SIOCGMIIREG:
-		mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id,
+		mii_data->val_out = mdiobus_read(phydev->mdio.bus,
+						 mii_data->phy_id,
 						 mii_data->reg_num);
 		return 0;
 
 	case SIOCSMIIREG:
-		if (mii_data->phy_id == phydev->addr) {
+		if (mii_data->phy_id == phydev->mdio.addr) {
 			switch (mii_data->reg_num) {
 			case MII_BMCR:
 				if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
@@ -445,10 +446,10 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
 			}
 		}
 
-		mdiobus_write(phydev->bus, mii_data->phy_id,
+		mdiobus_write(phydev->mdio.bus, mii_data->phy_id,
 			      mii_data->reg_num, val);
 
-		if (mii_data->phy_id == phydev->addr &&
+		if (mii_data->phy_id == phydev->mdio.addr &&
 		    mii_data->reg_num == MII_BMCR &&
 		    val & BMCR_RESET)
 			return phy_init_hw(phydev);
@@ -643,7 +644,7 @@ int phy_start_interrupts(struct phy_device *phydev)
 	if (request_irq(phydev->irq, phy_interrupt, 0, "phy_interrupt",
 			phydev) < 0) {
 		pr_warn("%s: Can't get IRQ %d (PHY)\n",
-			phydev->bus->name, phydev->irq);
+			phydev->mdio.bus->name, phydev->irq);
 		phydev->irq = PHY_POLL;
 		return 0;
 	}
@@ -691,25 +692,29 @@ void phy_change(struct work_struct *work)
 	struct phy_device *phydev =
 		container_of(work, struct phy_device, phy_queue);
 
-	if (phydev->drv->did_interrupt &&
-	    !phydev->drv->did_interrupt(phydev))
-		goto ignore;
+	if (phy_interrupt_is_valid(phydev)) {
+		if (phydev->drv->did_interrupt &&
+		    !phydev->drv->did_interrupt(phydev))
+			goto ignore;
 
-	if (phy_disable_interrupts(phydev))
-		goto phy_err;
+		if (phy_disable_interrupts(phydev))
+			goto phy_err;
+	}
 
 	mutex_lock(&phydev->lock);
 	if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
 		phydev->state = PHY_CHANGELINK;
 	mutex_unlock(&phydev->lock);
 
-	atomic_dec(&phydev->irq_disable);
-	enable_irq(phydev->irq);
+	if (phy_interrupt_is_valid(phydev)) {
+		atomic_dec(&phydev->irq_disable);
+		enable_irq(phydev->irq);
 
-	/* Reenable interrupts */
-	if (PHY_HALTED != phydev->state &&
-	    phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED))
-		goto irq_enable_err;
+		/* Reenable interrupts */
+		if (PHY_HALTED != phydev->state &&
+		    phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED))
+			goto irq_enable_err;
+	}
 
 	/* reschedule state queue work to run as soon as possible */
 	cancel_delayed_work_sync(&phydev->state_queue);
@@ -904,10 +909,10 @@ void phy_state_machine(struct work_struct *work)
 		phydev->adjust_link(phydev->attached_dev);
 		break;
 	case PHY_RUNNING:
-		/* Only register a CHANGE if we are polling or ignoring
-		 * interrupts and link changed since latest checking.
+		/* Only register a CHANGE if we are polling and link changed
+		 * since latest checking.
 		 */
-		if (!phy_interrupt_is_valid(phydev)) {
+		if (phydev->irq == PHY_POLL) {
 			old_link = phydev->link;
 			err = phy_read_status(phydev);
 			if (err)
@@ -995,18 +1000,25 @@ void phy_state_machine(struct work_struct *work)
 	if (err < 0)
 		phy_error(phydev);
 
-	dev_dbg(&phydev->dev, "PHY state change %s -> %s\n",
-		phy_state_to_str(old_state), phy_state_to_str(phydev->state));
+	phydev_dbg(phydev, "PHY state change %s -> %s\n",
+		   phy_state_to_str(old_state),
+		   phy_state_to_str(phydev->state));
 
-	queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
-			   PHY_STATE_TIME * HZ);
+	/* Only re-schedule a PHY state machine change if we are polling the
+	 * PHY, if PHY_IGNORE_INTERRUPT is set, then we will be moving
+	 * between states from phy_mac_interrupt()
+	 */
+	if (phydev->irq == PHY_POLL)
+		queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
+				   PHY_STATE_TIME * HZ);
 }
 
 void phy_mac_interrupt(struct phy_device *phydev, int new_link)
 {
-	cancel_work_sync(&phydev->phy_queue);
 	phydev->link = new_link;
-	schedule_work(&phydev->phy_queue);
+
+	/* Trigger a state machine change */
+	queue_work(system_power_efficient_wq, &phydev->phy_queue);
 }
 EXPORT_SYMBOL(phy_mac_interrupt);
 
@@ -1028,7 +1040,6 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
  * @phydev: The PHY device bus
  * @prtad: MMD Address
  * @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
  *
  * Description: it reads data from the MMD registers (clause 22 to access to
  * clause 45) of the specified phy address.
@@ -1038,14 +1049,14 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
  * 3) Read  reg 14 // Read MMD data
  */
-int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
-				 int devad, int addr)
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad)
 {
 	struct phy_driver *phydrv = phydev->drv;
+	int addr = phydev->mdio.addr;
 	int value = -1;
 
 	if (!phydrv->read_mmd_indirect) {
-		struct mii_bus *bus = phydev->bus;
+		struct mii_bus *bus = phydev->mdio.bus;
 
 		mutex_lock(&bus->mdio_lock);
 		mmd_phy_indirect(bus, prtad, devad, addr);
@@ -1065,7 +1076,6 @@ EXPORT_SYMBOL(phy_read_mmd_indirect);
  * @phydev: The PHY device
  * @prtad: MMD Address
  * @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
  * @data: data to write in the MMD register
  *
  * Description: Write data from the MMD registers of the specified
@@ -1077,12 +1087,13 @@ EXPORT_SYMBOL(phy_read_mmd_indirect);
  * 3) Write reg 14 // Write MMD data
  */
 void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
-				   int devad, int addr, u32 data)
+				   int devad, u32 data)
 {
 	struct phy_driver *phydrv = phydev->drv;
+	int addr = phydev->mdio.addr;
 
 	if (!phydrv->write_mmd_indirect) {
-		struct mii_bus *bus = phydev->bus;
+		struct mii_bus *bus = phydev->mdio.bus;
 
 		mutex_lock(&bus->mdio_lock);
 		mmd_phy_indirect(bus, prtad, devad, addr);
@@ -1129,7 +1140,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 
 		/* First check if the EEE ability is supported */
 		eee_cap = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
-						MDIO_MMD_PCS, phydev->addr);
+						MDIO_MMD_PCS);
 		if (eee_cap <= 0)
 			goto eee_exit_err;
 
@@ -1141,12 +1152,12 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 		 * the EEE advertising registers.
 		 */
 		eee_lp = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
-					       MDIO_MMD_AN, phydev->addr);
+					       MDIO_MMD_AN);
 		if (eee_lp <= 0)
 			goto eee_exit_err;
 
 		eee_adv = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
-						MDIO_MMD_AN, phydev->addr);
+						MDIO_MMD_AN);
 		if (eee_adv <= 0)
 			goto eee_exit_err;
 
@@ -1160,15 +1171,13 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 			 * clock while it is signaling LPI.
 			 */
 			int val = phy_read_mmd_indirect(phydev, MDIO_CTRL1,
-							MDIO_MMD_PCS,
-							phydev->addr);
+							MDIO_MMD_PCS);
 			if (val < 0)
 				return val;
 
 			val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
 			phy_write_mmd_indirect(phydev, MDIO_CTRL1,
-					       MDIO_MMD_PCS, phydev->addr,
-					       val);
+					       MDIO_MMD_PCS, val);
 		}
 
 		return 0; /* EEE supported */
@@ -1187,8 +1196,7 @@ EXPORT_SYMBOL(phy_init_eee);
  */
 int phy_get_eee_err(struct phy_device *phydev)
 {
-	return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR,
-				     MDIO_MMD_PCS, phydev->addr);
+	return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR, MDIO_MMD_PCS);
 }
 EXPORT_SYMBOL(phy_get_eee_err);
 
@@ -1205,22 +1213,19 @@ int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
 	int val;
 
 	/* Get Supported EEE */
-	val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
-				    MDIO_MMD_PCS, phydev->addr);
+	val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE, MDIO_MMD_PCS);
 	if (val < 0)
 		return val;
 	data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
 
 	/* Get advertisement EEE */
-	val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
-				    MDIO_MMD_AN, phydev->addr);
+	val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN);
 	if (val < 0)
 		return val;
 	data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
 
 	/* Get LP advertisement EEE */
-	val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
-				    MDIO_MMD_AN, phydev->addr);
+	val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE, MDIO_MMD_AN);
 	if (val < 0)
 		return val;
 	data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
@@ -1240,8 +1245,7 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
 {
 	int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
 
-	phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
-			       phydev->addr, val);
+	phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
 
 	return 0;
 }
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 0bfbabad4..e551f3a89 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -43,15 +43,31 @@ MODULE_LICENSE("GPL");
 
 void phy_device_free(struct phy_device *phydev)
 {
-	put_device(&phydev->dev);
+	put_device(&phydev->mdio.dev);
 }
 EXPORT_SYMBOL(phy_device_free);
 
+static void phy_mdio_device_free(struct mdio_device *mdiodev)
+{
+	struct phy_device *phydev;
+
+	phydev = container_of(mdiodev, struct phy_device, mdio);
+	phy_device_free(phydev);
+}
+
 static void phy_device_release(struct device *dev)
 {
 	kfree(to_phy_device(dev));
 }
 
+static void phy_mdio_device_remove(struct mdio_device *mdiodev)
+{
+	struct phy_device *phydev;
+
+	phydev = container_of(mdiodev, struct phy_device, mdio);
+	phy_device_remove(phydev);
+}
+
 enum genphy_driver {
 	GENPHY_DRV_1G,
 	GENPHY_DRV_10G,
@@ -63,9 +79,118 @@ static struct phy_driver genphy_driver[GENPHY_DRV_MAX];
 static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
 
+#ifdef CONFIG_PM
+static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
+{
+	struct device_driver *drv = phydev->mdio.dev.driver;
+	struct phy_driver *phydrv = to_phy_driver(drv);
+	struct net_device *netdev = phydev->attached_dev;
+
+	if (!drv || !phydrv->suspend)
+		return false;
+
+	/* PHY not attached? May suspend if the PHY has not already been
+	 * suspended as part of a prior call to phy_disconnect() ->
+	 * phy_detach() -> phy_suspend() because the parent netdev might be the
+	 * MDIO bus driver and clock gated at this point.
+	 */
+	if (!netdev)
+		return !phydev->suspended;
+
+	/* Don't suspend PHY if the attached netdev parent may wakeup.
+	 * The parent may point to a PCI device, as in tg3 driver.
+	 */
+	if (netdev->dev.parent && device_may_wakeup(netdev->dev.parent))
+		return false;
+
+	/* Also don't suspend PHY if the netdev itself may wakeup. This
+	 * is the case for devices w/o underlaying pwr. mgmt. aware bus,
+	 * e.g. SoC devices.
+	 */
+	if (device_may_wakeup(&netdev->dev))
+		return false;
+
+	return true;
+}
+
+static int mdio_bus_phy_suspend(struct device *dev)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+
+	/* We must stop the state machine manually, otherwise it stops out of
+	 * control, possibly with the phydev->lock held. Upon resume, netdev
+	 * may call phy routines that try to grab the same lock, and that may
+	 * lead to a deadlock.
+	 */
+	if (phydev->attached_dev && phydev->adjust_link)
+		phy_stop_machine(phydev);
+
+	if (!mdio_bus_phy_may_suspend(phydev))
+		return 0;
+
+	return phy_suspend(phydev);
+}
+
+static int mdio_bus_phy_resume(struct device *dev)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+	int ret;
+
+	if (!mdio_bus_phy_may_suspend(phydev))
+		goto no_resume;
+
+	ret = phy_resume(phydev);
+	if (ret < 0)
+		return ret;
+
+no_resume:
+	if (phydev->attached_dev && phydev->adjust_link)
+		phy_start_machine(phydev);
+
+	return 0;
+}
+
+static int mdio_bus_phy_restore(struct device *dev)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+	struct net_device *netdev = phydev->attached_dev;
+	int ret;
+
+	if (!netdev)
+		return 0;
+
+	ret = phy_init_hw(phydev);
+	if (ret < 0)
+		return ret;
+
+	/* The PHY needs to renegotiate. */
+	phydev->link = 0;
+	phydev->state = PHY_UP;
+
+	phy_start_machine(phydev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mdio_bus_phy_pm_ops = {
+	.suspend = mdio_bus_phy_suspend,
+	.resume = mdio_bus_phy_resume,
+	.freeze = mdio_bus_phy_suspend,
+	.thaw = mdio_bus_phy_resume,
+	.restore = mdio_bus_phy_restore,
+};
+
+#define MDIO_BUS_PHY_PM_OPS (&mdio_bus_phy_pm_ops)
+
+#else
+
+#define MDIO_BUS_PHY_PM_OPS NULL
+
+#endif /* CONFIG_PM */
+
 /**
  * phy_register_fixup - creates a new phy_fixup and adds it to the list
- * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
+ * @bus_id: A string which matches phydev->mdio.dev.bus_id (or PHY_ANY_ID)
  * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
  *	It can also be PHY_ANY_UID
  * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
@@ -114,7 +239,7 @@ EXPORT_SYMBOL(phy_register_fixup_for_id);
  */
 static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
 {
-	if (strcmp(fixup->bus_id, dev_name(&phydev->dev)) != 0)
+	if (strcmp(fixup->bus_id, phydev_name(phydev)) != 0)
 		if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
 			return 0;
 
@@ -148,18 +273,59 @@ static int phy_scan_fixups(struct phy_device *phydev)
 	return 0;
 }
 
+static int phy_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+	struct phy_driver *phydrv = to_phy_driver(drv);
+	const int num_ids = ARRAY_SIZE(phydev->c45_ids.device_ids);
+	int i;
+
+	if (!(phydrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY))
+		return 0;
+
+	if (phydrv->match_phy_device)
+		return phydrv->match_phy_device(phydev);
+
+	if (phydev->is_c45) {
+		for (i = 1; i < num_ids; i++) {
+			if (!(phydev->c45_ids.devices_in_package & (1 << i)))
+				continue;
+
+			if ((phydrv->phy_id & phydrv->phy_id_mask) ==
+			    (phydev->c45_ids.device_ids[i] &
+			     phydrv->phy_id_mask))
+				return 1;
+		}
+		return 0;
+	} else {
+		return (phydrv->phy_id & phydrv->phy_id_mask) ==
+			(phydev->phy_id & phydrv->phy_id_mask);
+	}
+}
+
 struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 				     bool is_c45,
 				     struct phy_c45_device_ids *c45_ids)
 {
 	struct phy_device *dev;
+	struct mdio_device *mdiodev;
 
 	/* We allocate the device, and initialize the default values */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev)
 		return ERR_PTR(-ENOMEM);
 
-	dev->dev.release = phy_device_release;
+	mdiodev = &dev->mdio;
+	mdiodev->dev.release = phy_device_release;
+	mdiodev->dev.parent = &bus->dev;
+	mdiodev->dev.bus = &mdio_bus_type;
+	mdiodev->bus = bus;
+	mdiodev->pm_ops = MDIO_BUS_PHY_PM_OPS;
+	mdiodev->bus_match = phy_bus_match;
+	mdiodev->addr = addr;
+	mdiodev->flags = MDIO_DEVICE_FLAG_PHY;
+	mdiodev->device_free = phy_mdio_device_free;
+	mdiodev->device_remove = phy_mdio_device_remove;
 
 	dev->speed = 0;
 	dev->duplex = -1;
@@ -171,15 +337,11 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 	dev->autoneg = AUTONEG_ENABLE;
 
 	dev->is_c45 = is_c45;
-	dev->addr = addr;
 	dev->phy_id = phy_id;
 	if (c45_ids)
 		dev->c45_ids = *c45_ids;
-	dev->bus = bus;
-	dev->dev.parent = &bus->dev;
-	dev->dev.bus = &mdio_bus_type;
-	dev->irq = bus->irq ? bus->irq[addr] : PHY_POLL;
-	dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
+	dev->irq = bus->irq[addr];
+	dev_set_name(&mdiodev->dev, PHY_ID_FMT, bus->id, addr);
 
 	dev->state = PHY_DOWN;
 
@@ -199,7 +361,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 	 */
 	request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id));
 
-	device_initialize(&dev->dev);
+	device_initialize(&mdiodev->dev);
 
 	return dev;
 }
@@ -373,6 +535,48 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 }
 EXPORT_SYMBOL(get_phy_device);
 
+static ssize_t
+phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+
+	return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id);
+}
+static DEVICE_ATTR_RO(phy_id);
+
+static ssize_t
+phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+	const char *mode = NULL;
+
+	if (phy_is_internal(phydev))
+		mode = "internal";
+	else
+		mode = phy_modes(phydev->interface);
+
+	return sprintf(buf, "%s\n", mode);
+}
+static DEVICE_ATTR_RO(phy_interface);
+
+static ssize_t
+phy_has_fixups_show(struct device *dev, struct device_attribute *attr,
+		    char *buf)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+
+	return sprintf(buf, "%d\n", phydev->has_fixups);
+}
+static DEVICE_ATTR_RO(phy_has_fixups);
+
+static struct attribute *phy_dev_attrs[] = {
+	&dev_attr_phy_id.attr,
+	&dev_attr_phy_interface.attr,
+	&dev_attr_phy_has_fixups.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(phy_dev);
+
 /**
  * phy_device_register - Register the phy device on the MDIO bus
  * @phydev: phy_device structure to be added to the MDIO bus
@@ -381,28 +585,29 @@ int phy_device_register(struct phy_device *phydev)
 {
 	int err;
 
-	/* Don't register a phy if one is already registered at this address */
-	if (phydev->bus->phy_map[phydev->addr])
-		return -EINVAL;
-	phydev->bus->phy_map[phydev->addr] = phydev;
+	err = mdiobus_register_device(&phydev->mdio);
+	if (err)
+		return err;
 
 	/* Run all of the fixups for this PHY */
 	err = phy_scan_fixups(phydev);
 	if (err) {
-		pr_err("PHY %d failed to initialize\n", phydev->addr);
+		pr_err("PHY %d failed to initialize\n", phydev->mdio.addr);
 		goto out;
 	}
 
-	err = device_add(&phydev->dev);
+	phydev->mdio.dev.groups = phy_dev_groups;
+
+	err = device_add(&phydev->mdio.dev);
 	if (err) {
-		pr_err("PHY %d failed to add\n", phydev->addr);
+		pr_err("PHY %d failed to add\n", phydev->mdio.addr);
 		goto out;
 	}
 
 	return 0;
 
  out:
-	phydev->bus->phy_map[phydev->addr] = NULL;
+	mdiobus_unregister_device(&phydev->mdio);
 	return err;
 }
 EXPORT_SYMBOL(phy_device_register);
@@ -417,11 +622,8 @@ EXPORT_SYMBOL(phy_device_register);
  */
 void phy_device_remove(struct phy_device *phydev)
 {
-	struct mii_bus *bus = phydev->bus;
-	int addr = phydev->addr;
-
-	device_del(&phydev->dev);
-	bus->phy_map[addr] = NULL;
+	device_del(&phydev->mdio.dev);
+	mdiobus_unregister_device(&phydev->mdio);
 }
 EXPORT_SYMBOL(phy_device_remove);
 
@@ -431,11 +633,13 @@ EXPORT_SYMBOL(phy_device_remove);
  */
 struct phy_device *phy_find_first(struct mii_bus *bus)
 {
+	struct phy_device *phydev;
 	int addr;
 
 	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
-		if (bus->phy_map[addr])
-			return bus->phy_map[addr];
+		phydev = mdiobus_get_phy(bus, addr);
+		if (phydev)
+			return phydev;
 	}
 	return NULL;
 }
@@ -607,6 +811,33 @@ int phy_init_hw(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_init_hw);
 
+void phy_attached_info(struct phy_device *phydev)
+{
+	phy_attached_print(phydev, NULL);
+}
+EXPORT_SYMBOL(phy_attached_info);
+
+#define ATTACHED_FMT "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)"
+void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
+{
+	if (!fmt) {
+		dev_info(&phydev->mdio.dev, ATTACHED_FMT "\n",
+			 phydev->drv->name, phydev_name(phydev),
+			 phydev->irq);
+	} else {
+		va_list ap;
+
+		dev_info(&phydev->mdio.dev, ATTACHED_FMT,
+			 phydev->drv->name, phydev_name(phydev),
+			 phydev->irq);
+
+		va_start(ap, fmt);
+		vprintk(fmt, ap);
+		va_end(ap);
+	}
+}
+EXPORT_SYMBOL(phy_attached_print);
+
 /**
  * phy_attach_direct - attach a network device to a given PHY device pointer
  * @dev: network device to attach
@@ -625,8 +856,8 @@ EXPORT_SYMBOL(phy_init_hw);
 int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 		      u32 flags, phy_interface_t interface)
 {
-	struct mii_bus *bus = phydev->bus;
-	struct device *d = &phydev->dev;
+	struct mii_bus *bus = phydev->mdio.bus;
+	struct device *d = &phydev->mdio.dev;
 	int err;
 
 	if (!try_module_get(bus->owner)) {
@@ -641,9 +872,11 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	 */
 	if (!d->driver) {
 		if (phydev->is_c45)
-			d->driver = &genphy_driver[GENPHY_DRV_10G].driver;
+			d->driver =
+				&genphy_driver[GENPHY_DRV_10G].mdiodrv.driver;
 		else
-			d->driver = &genphy_driver[GENPHY_DRV_1G].driver;
+			d->driver =
+				&genphy_driver[GENPHY_DRV_1G].mdiodrv.driver;
 
 		err = d->driver->probe(d);
 		if (err >= 0)
@@ -668,6 +901,11 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 
 	phydev->state = PHY_READY;
 
+	/* Initial carrier state is off as the phy is about to be
+	 * (re)initialized.
+	 */
+	netif_carrier_off(phydev->attached_dev);
+
 	/* Do initial configuration here, now that
 	 * we have certain key parameters
 	 * (dev_flags and interface)
@@ -744,8 +982,9 @@ void phy_detach(struct phy_device *phydev)
 	 * real driver could be loaded
 	 */
 	for (i = 0; i < ARRAY_SIZE(genphy_driver); i++) {
-		if (phydev->dev.driver == &genphy_driver[i].driver) {
-			device_release_driver(&phydev->dev);
+		if (phydev->mdio.dev.driver ==
+		    &genphy_driver[i].mdiodrv.driver) {
+			device_release_driver(&phydev->mdio.dev);
 			break;
 		}
 	}
@@ -754,16 +993,16 @@ void phy_detach(struct phy_device *phydev)
 	 * The phydev might go away on the put_device() below, so avoid
 	 * a use-after-free bug by reading the underlying bus first.
 	 */
-	bus = phydev->bus;
+	bus = phydev->mdio.bus;
 
-	put_device(&phydev->dev);
+	put_device(&phydev->mdio.dev);
 	module_put(bus->owner);
 }
 EXPORT_SYMBOL(phy_detach);
 
 int phy_suspend(struct phy_device *phydev)
 {
-	struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver);
+	struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
 	struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
 	int ret = 0;
 
@@ -786,7 +1025,7 @@ EXPORT_SYMBOL(phy_suspend);
 
 int phy_resume(struct phy_device *phydev)
 {
-	struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver);
+	struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
 	int ret = 0;
 
 	if (phydrv->resume)
@@ -1171,7 +1410,7 @@ int genphy_config_init(struct phy_device *phydev)
 
 	features = (SUPPORTED_TP | SUPPORTED_MII
 			| SUPPORTED_AUI | SUPPORTED_FIBRE |
-			SUPPORTED_BNC);
+			SUPPORTED_BNC | SUPPORTED_Pause | SUPPORTED_Asym_Pause);
 
 	/* Do we support autonegotiation? */
 	val = phy_read(phydev, MII_BMSR);
@@ -1303,7 +1542,7 @@ EXPORT_SYMBOL(phy_set_max_speed);
 
 static void of_set_phy_supported(struct phy_device *phydev)
 {
-	struct device_node *node = phydev->dev.of_node;
+	struct device_node *node = phydev->mdio.dev.of_node;
 	u32 max_speed;
 
 	if (!IS_ENABLED(CONFIG_OF_MDIO))
@@ -1327,7 +1566,7 @@ static void of_set_phy_supported(struct phy_device *phydev)
 static int phy_probe(struct device *dev)
 {
 	struct phy_device *phydev = to_phy_device(dev);
-	struct device_driver *drv = phydev->dev.driver;
+	struct device_driver *drv = phydev->mdio.dev.driver;
 	struct phy_driver *phydrv = to_phy_driver(drv);
 	int err = 0;
 
@@ -1382,17 +1621,20 @@ static int phy_remove(struct device *dev)
 /**
  * phy_driver_register - register a phy_driver with the PHY layer
  * @new_driver: new phy_driver to register
+ * @owner: module owning this PHY
  */
-int phy_driver_register(struct phy_driver *new_driver)
+int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
 {
 	int retval;
 
-	new_driver->driver.name = new_driver->name;
-	new_driver->driver.bus = &mdio_bus_type;
-	new_driver->driver.probe = phy_probe;
-	new_driver->driver.remove = phy_remove;
+	new_driver->mdiodrv.flags |= MDIO_DEVICE_IS_PHY;
+	new_driver->mdiodrv.driver.name = new_driver->name;
+	new_driver->mdiodrv.driver.bus = &mdio_bus_type;
+	new_driver->mdiodrv.driver.probe = phy_probe;
+	new_driver->mdiodrv.driver.remove = phy_remove;
+	new_driver->mdiodrv.driver.owner = owner;
 
-	retval = driver_register(&new_driver->driver);
+	retval = driver_register(&new_driver->mdiodrv.driver);
 	if (retval) {
 		pr_err("%s: Error %d in registering driver\n",
 		       new_driver->name, retval);
@@ -1406,12 +1648,13 @@ int phy_driver_register(struct phy_driver *new_driver)
 }
 EXPORT_SYMBOL(phy_driver_register);
 
-int phy_drivers_register(struct phy_driver *new_driver, int n)
+int phy_drivers_register(struct phy_driver *new_driver, int n,
+			 struct module *owner)
 {
 	int i, ret = 0;
 
 	for (i = 0; i < n; i++) {
-		ret = phy_driver_register(new_driver + i);
+		ret = phy_driver_register(new_driver + i, owner);
 		if (ret) {
 			while (i-- > 0)
 				phy_driver_unregister(new_driver + i);
@@ -1424,7 +1667,7 @@ EXPORT_SYMBOL(phy_drivers_register);
 
 void phy_driver_unregister(struct phy_driver *drv)
 {
-	driver_unregister(&drv->driver);
+	driver_unregister(&drv->mdiodrv.driver);
 }
 EXPORT_SYMBOL(phy_driver_unregister);
 
@@ -1452,7 +1695,6 @@ static struct phy_driver genphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE, },
 }, {
 	.phy_id         = 0xffffffff,
 	.phy_id_mask    = 0xffffffff,
@@ -1464,7 +1706,6 @@ static struct phy_driver genphy_driver[] = {
 	.read_status    = gen10g_read_status,
 	.suspend        = gen10g_suspend,
 	.resume         = gen10g_resume,
-	.driver         = {.owner = THIS_MODULE, },
 } };
 
 static int __init phy_init(void)
@@ -1476,7 +1717,7 @@ static int __init phy_init(void)
 		return rc;
 
 	rc = phy_drivers_register(genphy_driver,
-				  ARRAY_SIZE(genphy_driver));
+				  ARRAY_SIZE(genphy_driver), THIS_MODULE);
 	if (rc)
 		mdio_bus_exit();
 
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index be4c6f7c3..d470db89e 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -122,7 +122,6 @@ static struct phy_driver qs6612_driver[] = { {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= qs6612_ack_interrupt,
 	.config_intr	= qs6612_config_intr,
-	.driver 	= { .owner = THIS_MODULE,},
 } };
 
 module_phy_driver(qs6612_driver);
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 43ab69136..aadd6e9f5 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -124,7 +124,6 @@ static struct phy_driver realtek_drvs[] = {
 		.flags          = PHY_HAS_INTERRUPT,
 		.config_aneg    = &genphy_config_aneg,
 		.read_status    = &genphy_read_status,
-		.driver         = { .owner = THIS_MODULE,},
 	}, {
 		.phy_id		= 0x001cc912,
 		.name		= "RTL8211B Gigabit Ethernet",
@@ -135,7 +134,6 @@ static struct phy_driver realtek_drvs[] = {
 		.read_status	= &genphy_read_status,
 		.ack_interrupt	= &rtl821x_ack_interrupt,
 		.config_intr	= &rtl8211b_config_intr,
-		.driver		= { .owner = THIS_MODULE,},
 	}, {
 		.phy_id		= 0x001cc914,
 		.name		= "RTL8211DN Gigabit Ethernet",
@@ -148,7 +146,6 @@ static struct phy_driver realtek_drvs[] = {
 		.config_intr	= rtl8211e_config_intr,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
-		.driver		= { .owner = THIS_MODULE,},
 	}, {
 		.phy_id		= 0x001cc915,
 		.name		= "RTL8211E Gigabit Ethernet",
@@ -161,7 +158,6 @@ static struct phy_driver realtek_drvs[] = {
 		.config_intr	= &rtl8211e_config_intr,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
-		.driver		= { .owner = THIS_MODULE,},
 	}, {
 		.phy_id		= 0x001cc916,
 		.name		= "RTL8211F Gigabit Ethernet",
@@ -175,7 +171,6 @@ static struct phy_driver realtek_drvs[] = {
 		.config_intr	= &rtl8211f_config_intr,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
-		.driver		= { .owner = THIS_MODULE },
 	},
 };
 
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index dc2da8770..2e21e9366 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -24,6 +24,10 @@
 #include <linux/netdevice.h>
 #include <linux/smscphy.h>
 
+struct smsc_phy_priv {
+	bool energy_enable;
+};
+
 static int smsc_phy_config_intr(struct phy_device *phydev)
 {
 	int rc = phy_write (phydev, MII_LAN83C185_IM,
@@ -43,19 +47,14 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
 
 static int smsc_phy_config_init(struct phy_device *phydev)
 {
-	int __maybe_unused len;
-	struct device *dev __maybe_unused = &phydev->dev;
-	struct device_node *of_node __maybe_unused = dev->of_node;
+	struct smsc_phy_priv *priv = phydev->priv;
+
 	int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
-	int enable_energy = 1;
 
 	if (rc < 0)
 		return rc;
 
-	if (of_find_property(of_node, "smsc,disable-energy-detect", &len))
-		enable_energy = 0;
-
-	if (enable_energy) {
+	if (priv->energy_enable) {
 		/* Enable energy detect mode for this SMSC Transceivers */
 		rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
 			       rc | MII_LAN83C185_EDPWRDOWN);
@@ -110,10 +109,13 @@ static int lan911x_config_init(struct phy_device *phydev)
  */
 static int lan87xx_read_status(struct phy_device *phydev)
 {
+	struct smsc_phy_priv *priv = phydev->priv;
+
 	int err = genphy_read_status(phydev);
-	int i;
 
-	if (!phydev->link) {
+	if (!phydev->link && priv->energy_enable) {
+		int i;
+
 		/* Disable EDPD to wake up PHY */
 		int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 		if (rc < 0)
@@ -149,6 +151,26 @@ static int lan87xx_read_status(struct phy_device *phydev)
 	return err;
 }
 
+static int smsc_phy_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct device_node *of_node = dev->of_node;
+	struct smsc_phy_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->energy_enable = true;
+
+	if (of_property_read_bool(of_node, "smsc,disable-energy-detect"))
+		priv->energy_enable = false;
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
 static struct phy_driver smsc_phy_driver[] = {
 {
 	.phy_id		= 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
@@ -159,6 +181,8 @@ static struct phy_driver smsc_phy_driver[] = {
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 
+	.probe		= smsc_phy_probe,
+
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
@@ -171,8 +195,6 @@ static struct phy_driver smsc_phy_driver[] = {
 
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-
-	.driver		= { .owner = THIS_MODULE, }
 }, {
 	.phy_id		= 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
 	.phy_id_mask	= 0xfffffff0,
@@ -182,6 +204,8 @@ static struct phy_driver smsc_phy_driver[] = {
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 
+	.probe		= smsc_phy_probe,
+
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
@@ -194,8 +218,6 @@ static struct phy_driver smsc_phy_driver[] = {
 
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-
-	.driver		= { .owner = THIS_MODULE, }
 }, {
 	.phy_id		= 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
 	.phy_id_mask	= 0xfffffff0,
@@ -205,6 +227,8 @@ static struct phy_driver smsc_phy_driver[] = {
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 
+	.probe		= smsc_phy_probe,
+
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= lan87xx_read_status,
@@ -217,8 +241,6 @@ static struct phy_driver smsc_phy_driver[] = {
 
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-
-	.driver		= { .owner = THIS_MODULE, }
 }, {
 	.phy_id		= 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
 	.phy_id_mask	= 0xfffffff0,
@@ -228,6 +250,8 @@ static struct phy_driver smsc_phy_driver[] = {
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 
+	.probe		= smsc_phy_probe,
+
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
@@ -239,8 +263,6 @@ static struct phy_driver smsc_phy_driver[] = {
 
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-
-	.driver		= { .owner = THIS_MODULE, }
 }, {
 	.phy_id		= 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
 	.phy_id_mask	= 0xfffffff0,
@@ -250,6 +272,8 @@ static struct phy_driver smsc_phy_driver[] = {
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 
+	.probe		= smsc_phy_probe,
+
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= lan87xx_read_status,
@@ -262,8 +286,29 @@ static struct phy_driver smsc_phy_driver[] = {
 
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
+}, {
+	.phy_id		= 0x0007c110,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "SMSC LAN8740",
 
-	.driver		= { .owner = THIS_MODULE, }
+	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause
+				| SUPPORTED_Asym_Pause),
+	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
+
+	.probe		= smsc_phy_probe,
+
+	/* basic functions */
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= lan87xx_read_status,
+	.config_init	= smsc_phy_config_init,
+	.soft_reset	= smsc_phy_reset,
+
+	/* IRQ related */
+	.ack_interrupt	= smsc_phy_ack_interrupt,
+	.config_intr	= smsc_phy_config_intr,
+
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 } };
 
 module_phy_driver(smsc_phy_driver);
@@ -278,6 +323,7 @@ static struct mdio_device_id __maybe_unused smsc_tbl[] = {
 	{ 0x0007c0c0, 0xfffffff0 },
 	{ 0x0007c0d0, 0xfffffff0 },
 	{ 0x0007c0f0, 0xfffffff0 },
+	{ 0x0007c110, 0xfffffff0 },
 	{ }
 };
 
diff --git a/drivers/net/phy/ste10Xp.c b/drivers/net/phy/ste10Xp.c
index 3fc199b77..d00cfb645 100644
--- a/drivers/net/phy/ste10Xp.c
+++ b/drivers/net/phy/ste10Xp.c
@@ -95,7 +95,6 @@ static struct phy_driver ste10xp_pdriver[] = {
 	.config_intr = ste10Xp_config_intr,
 	.suspend = genphy_suspend,
 	.resume = genphy_resume,
-	.driver = {.owner = THIS_MODULE,}
 }, {
 	.phy_id = STE100P_PHY_ID,
 	.phy_id_mask = 0xffffffff,
@@ -109,7 +108,6 @@ static struct phy_driver ste10xp_pdriver[] = {
 	.config_intr = ste10Xp_config_intr,
 	.suspend = genphy_suspend,
 	.resume = genphy_resume,
-	.driver = {.owner = THIS_MODULE,}
 } };
 
 module_phy_driver(ste10xp_pdriver);
diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
index 07463fcca..fb2cef764 100644
--- a/drivers/net/phy/teranetics.c
+++ b/drivers/net/phy/teranetics.c
@@ -108,7 +108,6 @@ static struct phy_driver teranetics_driver[] = {
 	.config_aneg    = teranetics_config_aneg,
 	.read_status	= teranetics_read_status,
 	.match_phy_device = teranetics_match_phy_device,
-	.driver		= { .owner = THIS_MODULE,},
 },
 };
 
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index dd295dbaa..2e37eb337 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -236,7 +236,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.read_status    = &genphy_read_status,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
 	.config_intr    = &vsc82xx_config_intr,
-	.driver         = { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_VSC8244,
 	.name		= "Vitesse VSC8244",
@@ -248,7 +247,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.read_status	= &genphy_read_status,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
 	.config_intr	= &vsc82xx_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_VSC8514,
 	.name		= "Vitesse VSC8514",
@@ -260,7 +258,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.read_status	= &genphy_read_status,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
 	.config_intr	= &vsc82xx_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id         = PHY_ID_VSC8574,
 	.name           = "Vitesse VSC8574",
@@ -272,7 +269,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.read_status    = &genphy_read_status,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
 	.config_intr    = &vsc82xx_config_intr,
-	.driver         = { .owner = THIS_MODULE,},
 }, {
 	.phy_id         = PHY_ID_VSC8601,
 	.name           = "Vitesse VSC8601",
@@ -284,7 +280,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.read_status    = &genphy_read_status,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
 	.config_intr    = &vsc82xx_config_intr,
-	.driver         = { .owner = THIS_MODULE,},
 }, {
 	.phy_id         = PHY_ID_VSC8662,
 	.name           = "Vitesse VSC8662",
@@ -296,7 +291,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.read_status    = &genphy_read_status,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
 	.config_intr    = &vsc82xx_config_intr,
-	.driver         = { .owner = THIS_MODULE,},
 }, {
 	/* Vitesse 8221 */
 	.phy_id		= PHY_ID_VSC8221,
@@ -309,7 +303,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.read_status	= &genphy_read_status,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
 	.config_intr	= &vsc82xx_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 }, {
 	/* Vitesse 8211 */
 	.phy_id		= PHY_ID_VSC8211,
@@ -322,7 +315,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.read_status	= &genphy_read_status,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
 	.config_intr	= &vsc82xx_config_intr,
-	.driver		= { .owner = THIS_MODULE,},
 } };
 
 module_phy_driver(vsc82xx_driver);