summaryrefslogtreecommitdiff
path: root/drivers/net/wimax/i2400m/driver.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/net/wimax/i2400m/driver.c
Initial import
Diffstat (limited to 'drivers/net/wimax/i2400m/driver.c')
-rw-r--r--drivers/net/wimax/i2400m/driver.c1025
1 files changed, 1025 insertions, 0 deletions
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
new file mode 100644
index 000000000..9c78090e7
--- /dev/null
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -0,0 +1,1025 @@
+/*
+ * Intel Wireless WiMAX Connection 2400m
+ * Generic probe/disconnect, reset and message passing
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * See i2400m.h for driver documentation. This contains helpers for
+ * the driver model glue [_setup()/_release()], handling device resets
+ * [_dev_reset_handle()], and the backends for the WiMAX stack ops
+ * reset [_op_reset()] and message from user [_op_msg_from_user()].
+ *
+ * ROADMAP:
+ *
+ * i2400m_op_msg_from_user()
+ * i2400m_msg_to_dev()
+ * wimax_msg_to_user_send()
+ *
+ * i2400m_op_reset()
+ * i240m->bus_reset()
+ *
+ * i2400m_dev_reset_handle()
+ * __i2400m_dev_reset_handle()
+ * __i2400m_dev_stop()
+ * __i2400m_dev_start()
+ *
+ * i2400m_setup()
+ * i2400m->bus_setup()
+ * i2400m_bootrom_init()
+ * register_netdev()
+ * wimax_dev_add()
+ * i2400m_dev_start()
+ * __i2400m_dev_start()
+ * i2400m_dev_bootstrap()
+ * i2400m_tx_setup()
+ * i2400m->bus_dev_start()
+ * i2400m_firmware_check()
+ * i2400m_check_mac_addr()
+ *
+ * i2400m_release()
+ * i2400m_dev_stop()
+ * __i2400m_dev_stop()
+ * i2400m_dev_shutdown()
+ * i2400m->bus_dev_stop()
+ * i2400m_tx_release()
+ * i2400m->bus_release()
+ * wimax_dev_rm()
+ * unregister_netdev()
+ */
+#include "i2400m.h"
+#include <linux/etherdevice.h>
+#include <linux/wimax/i2400m.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/suspend.h>
+#include <linux/slab.h>
+
+#define D_SUBMODULE driver
+#include "debug-levels.h"
+
+
+static char i2400m_debug_params[128];
+module_param_string(debug, i2400m_debug_params, sizeof(i2400m_debug_params),
+ 0644);
+MODULE_PARM_DESC(debug,
+ "String of space-separated NAME:VALUE pairs, where NAMEs "
+ "are the different debug submodules and VALUE are the "
+ "initial debug value to set.");
+
+static char i2400m_barkers_params[128];
+module_param_string(barkers, i2400m_barkers_params,
+ sizeof(i2400m_barkers_params), 0644);
+MODULE_PARM_DESC(barkers,
+ "String of comma-separated 32-bit values; each is "
+ "recognized as the value the device sends as a reboot "
+ "signal; values are appended to a list--setting one value "
+ "as zero cleans the existing list and starts a new one.");
+
+/*
+ * WiMAX stack operation: relay a message from user space
+ *
+ * @wimax_dev: device descriptor
+ * @pipe_name: named pipe the message is for
+ * @msg_buf: pointer to the message bytes
+ * @msg_len: length of the buffer
+ * @genl_info: passed by the generic netlink layer
+ *
+ * The WiMAX stack will call this function when a message was received
+ * from user space.
+ *
+ * For the i2400m, this is an L3L4 message, as specified in
+ * include/linux/wimax/i2400m.h, and thus prefixed with a 'struct
+ * i2400m_l3l4_hdr'. Driver (and device) expect the messages to be
+ * coded in Little Endian.
+ *
+ * This function just verifies that the header declaration and the
+ * payload are consistent and then deals with it, either forwarding it
+ * to the device or procesing it locally.
+ *
+ * In the i2400m, messages are basically commands that will carry an
+ * ack, so we use i2400m_msg_to_dev() and then deliver the ack back to
+ * user space. The rx.c code might intercept the response and use it
+ * to update the driver's state, but then it will pass it on so it can
+ * be relayed back to user space.
+ *
+ * Note that asynchronous events from the device are processed and
+ * sent to user space in rx.c.
+ */
+static
+int i2400m_op_msg_from_user(struct wimax_dev *wimax_dev,
+ const char *pipe_name,
+ const void *msg_buf, size_t msg_len,
+ const struct genl_info *genl_info)
+{
+ int result;
+ struct i2400m *i2400m = wimax_dev_to_i2400m(wimax_dev);
+ struct device *dev = i2400m_dev(i2400m);
+ struct sk_buff *ack_skb;
+
+ d_fnstart(4, dev, "(wimax_dev %p [i2400m %p] msg_buf %p "
+ "msg_len %zu genl_info %p)\n", wimax_dev, i2400m,
+ msg_buf, msg_len, genl_info);
+ ack_skb = i2400m_msg_to_dev(i2400m, msg_buf, msg_len);
+ result = PTR_ERR(ack_skb);
+ if (IS_ERR(ack_skb))
+ goto error_msg_to_dev;
+ result = wimax_msg_send(&i2400m->wimax_dev, ack_skb);
+error_msg_to_dev:
+ d_fnend(4, dev, "(wimax_dev %p [i2400m %p] msg_buf %p msg_len %zu "
+ "genl_info %p) = %d\n", wimax_dev, i2400m, msg_buf, msg_len,
+ genl_info, result);
+ return result;
+}
+
+
+/*
+ * Context to wait for a reset to finalize
+ */
+struct i2400m_reset_ctx {
+ struct completion completion;
+ int result;
+};
+
+
+/*
+ * WiMAX stack operation: reset a device
+ *
+ * @wimax_dev: device descriptor
+ *
+ * See the documentation for wimax_reset() and wimax_dev->op_reset for
+ * the requirements of this function. The WiMAX stack guarantees
+ * serialization on calls to this function.
+ *
+ * Do a warm reset on the device; if it fails, resort to a cold reset
+ * and return -ENODEV. On successful warm reset, we need to block
+ * until it is complete.
+ *
+ * The bus-driver implementation of reset takes care of falling back
+ * to cold reset if warm fails.
+ */
+static
+int i2400m_op_reset(struct wimax_dev *wimax_dev)
+{
+ int result;
+ struct i2400m *i2400m = wimax_dev_to_i2400m(wimax_dev);
+ struct device *dev = i2400m_dev(i2400m);
+ struct i2400m_reset_ctx ctx = {
+ .completion = COMPLETION_INITIALIZER_ONSTACK(ctx.completion),
+ .result = 0,
+ };
+
+ d_fnstart(4, dev, "(wimax_dev %p)\n", wimax_dev);
+ mutex_lock(&i2400m->init_mutex);
+ i2400m->reset_ctx = &ctx;
+ mutex_unlock(&i2400m->init_mutex);
+ result = i2400m_reset(i2400m, I2400M_RT_WARM);
+ if (result < 0)
+ goto out;
+ result = wait_for_completion_timeout(&ctx.completion, 4*HZ);
+ if (result == 0)
+ result = -ETIMEDOUT;
+ else if (result > 0)
+ result = ctx.result;
+ /* if result < 0, pass it on */
+ mutex_lock(&i2400m->init_mutex);
+ i2400m->reset_ctx = NULL;
+ mutex_unlock(&i2400m->init_mutex);
+out:
+ d_fnend(4, dev, "(wimax_dev %p) = %d\n", wimax_dev, result);
+ return result;
+}
+
+
+/*
+ * Check the MAC address we got from boot mode is ok
+ *
+ * @i2400m: device descriptor
+ *
+ * Returns: 0 if ok, < 0 errno code on error.
+ */
+static
+int i2400m_check_mac_addr(struct i2400m *i2400m)
+{
+ int result;
+ struct device *dev = i2400m_dev(i2400m);
+ struct sk_buff *skb;
+ const struct i2400m_tlv_detailed_device_info *ddi;
+ struct net_device *net_dev = i2400m->wimax_dev.net_dev;
+
+ d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+ skb = i2400m_get_device_info(i2400m);
+ if (IS_ERR(skb)) {
+ result = PTR_ERR(skb);
+ dev_err(dev, "Cannot verify MAC address, error reading: %d\n",
+ result);
+ goto error;
+ }
+ /* Extract MAC address */
+ ddi = (void *) skb->data;
+ BUILD_BUG_ON(ETH_ALEN != sizeof(ddi->mac_address));
+ d_printf(2, dev, "GET DEVICE INFO: mac addr %pM\n",
+ ddi->mac_address);
+ if (!memcmp(net_dev->perm_addr, ddi->mac_address,
+ sizeof(ddi->mac_address)))
+ goto ok;
+ dev_warn(dev, "warning: device reports a different MAC address "
+ "to that of boot mode's\n");
+ dev_warn(dev, "device reports %pM\n", ddi->mac_address);
+ dev_warn(dev, "boot mode reported %pM\n", net_dev->perm_addr);
+ if (is_zero_ether_addr(ddi->mac_address))
+ dev_err(dev, "device reports an invalid MAC address, "
+ "not updating\n");
+ else {
+ dev_warn(dev, "updating MAC address\n");
+ net_dev->addr_len = ETH_ALEN;
+ memcpy(net_dev->perm_addr, ddi->mac_address, ETH_ALEN);
+ memcpy(net_dev->dev_addr, ddi->mac_address, ETH_ALEN);
+ }
+ok:
+ result = 0;
+ kfree_skb(skb);
+error:
+ d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
+ return result;
+}
+
+
+/**
+ * __i2400m_dev_start - Bring up driver communication with the device
+ *
+ * @i2400m: device descriptor
+ * @flags: boot mode flags
+ *
+ * Returns: 0 if ok, < 0 errno code on error.
+ *
+ * Uploads firmware and brings up all the resources needed to be able
+ * to communicate with the device.
+ *
+ * The workqueue has to be setup early, at least before RX handling
+ * (it's only real user for now) so it can process reports as they
+ * arrive. We also want to destroy it if we retry, to make sure it is
+ * flushed...easier like this.
+ *
+ * TX needs to be setup before the bus-specific code (otherwise on
+ * shutdown, the bus-tx code could try to access it).
+ */
+static
+int __i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri flags)
+{
+ int result;
+ struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
+ struct net_device *net_dev = wimax_dev->net_dev;
+ struct device *dev = i2400m_dev(i2400m);
+ int times = i2400m->bus_bm_retries;
+
+ d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+retry:
+ result = i2400m_dev_bootstrap(i2400m, flags);
+ if (result < 0) {
+ dev_err(dev, "cannot bootstrap device: %d\n", result);
+ goto error_bootstrap;
+ }
+ result = i2400m_tx_setup(i2400m);
+ if (result < 0)
+ goto error_tx_setup;
+ result = i2400m_rx_setup(i2400m);
+ if (result < 0)
+ goto error_rx_setup;
+ i2400m->work_queue = create_singlethread_workqueue(wimax_dev->name);
+ if (i2400m->work_queue == NULL) {
+ result = -ENOMEM;
+ dev_err(dev, "cannot create workqueue\n");
+ goto error_create_workqueue;
+ }
+ if (i2400m->bus_dev_start) {
+ result = i2400m->bus_dev_start(i2400m);
+ if (result < 0)
+ goto error_bus_dev_start;
+ }
+ i2400m->ready = 1;
+ wmb(); /* see i2400m->ready's documentation */
+ /* process pending reports from the device */
+ queue_work(i2400m->work_queue, &i2400m->rx_report_ws);
+ result = i2400m_firmware_check(i2400m); /* fw versions ok? */
+ if (result < 0)
+ goto error_fw_check;
+ /* At this point is ok to send commands to the device */
+ result = i2400m_check_mac_addr(i2400m);
+ if (result < 0)
+ goto error_check_mac_addr;
+ result = i2400m_dev_initialize(i2400m);
+ if (result < 0)
+ goto error_dev_initialize;
+
+ /* We don't want any additional unwanted error recovery triggered
+ * from any other context so if anything went wrong before we come
+ * here, let's keep i2400m->error_recovery untouched and leave it to
+ * dev_reset_handle(). See dev_reset_handle(). */
+
+ atomic_dec(&i2400m->error_recovery);
+ /* Every thing works so far, ok, now we are ready to
+ * take error recovery if it's required. */
+
+ /* At this point, reports will come for the device and set it
+ * to the right state if it is different than UNINITIALIZED */
+ d_fnend(3, dev, "(net_dev %p [i2400m %p]) = %d\n",
+ net_dev, i2400m, result);
+ return result;
+
+error_dev_initialize:
+error_check_mac_addr:
+error_fw_check:
+ i2400m->ready = 0;
+ wmb(); /* see i2400m->ready's documentation */
+ flush_workqueue(i2400m->work_queue);
+ if (i2400m->bus_dev_stop)
+ i2400m->bus_dev_stop(i2400m);
+error_bus_dev_start:
+ destroy_workqueue(i2400m->work_queue);
+error_create_workqueue:
+ i2400m_rx_release(i2400m);
+error_rx_setup:
+ i2400m_tx_release(i2400m);
+error_tx_setup:
+error_bootstrap:
+ if (result == -EL3RST && times-- > 0) {
+ flags = I2400M_BRI_SOFT|I2400M_BRI_MAC_REINIT;
+ goto retry;
+ }
+ d_fnend(3, dev, "(net_dev %p [i2400m %p]) = %d\n",
+ net_dev, i2400m, result);
+ return result;
+}
+
+
+static
+int i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri bm_flags)
+{
+ int result = 0;
+ mutex_lock(&i2400m->init_mutex); /* Well, start the device */
+ if (i2400m->updown == 0) {
+ result = __i2400m_dev_start(i2400m, bm_flags);
+ if (result >= 0) {
+ i2400m->updown = 1;
+ i2400m->alive = 1;
+ wmb();/* see i2400m->updown and i2400m->alive's doc */
+ }
+ }
+ mutex_unlock(&i2400m->init_mutex);
+ return result;
+}
+
+
+/**
+ * i2400m_dev_stop - Tear down driver communication with the device
+ *
+ * @i2400m: device descriptor
+ *
+ * Returns: 0 if ok, < 0 errno code on error.
+ *
+ * Releases all the resources allocated to communicate with the
+ * device. Note we cannot destroy the workqueue earlier as until RX is
+ * fully destroyed, it could still try to schedule jobs.
+ */
+static
+void __i2400m_dev_stop(struct i2400m *i2400m)
+{
+ struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
+ struct device *dev = i2400m_dev(i2400m);
+
+ d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+ wimax_state_change(wimax_dev, __WIMAX_ST_QUIESCING);
+ i2400m_msg_to_dev_cancel_wait(i2400m, -EL3RST);
+ complete(&i2400m->msg_completion);
+ i2400m_net_wake_stop(i2400m);
+ i2400m_dev_shutdown(i2400m);
+ /*
+ * Make sure no report hooks are running *before* we stop the
+ * communication infrastructure with the device.
+ */
+ i2400m->ready = 0; /* nobody can queue work anymore */
+ wmb(); /* see i2400m->ready's documentation */
+ flush_workqueue(i2400m->work_queue);
+
+ if (i2400m->bus_dev_stop)
+ i2400m->bus_dev_stop(i2400m);
+ destroy_workqueue(i2400m->work_queue);
+ i2400m_rx_release(i2400m);
+ i2400m_tx_release(i2400m);
+ wimax_state_change(wimax_dev, WIMAX_ST_DOWN);
+ d_fnend(3, dev, "(i2400m %p) = 0\n", i2400m);
+}
+
+
+/*
+ * Watch out -- we only need to stop if there is a need for it. The
+ * device could have reset itself and failed to come up again (see
+ * _i2400m_dev_reset_handle()).
+ */
+static
+void i2400m_dev_stop(struct i2400m *i2400m)
+{
+ mutex_lock(&i2400m->init_mutex);
+ if (i2400m->updown) {
+ __i2400m_dev_stop(i2400m);
+ i2400m->updown = 0;
+ i2400m->alive = 0;
+ wmb(); /* see i2400m->updown and i2400m->alive's doc */
+ }
+ mutex_unlock(&i2400m->init_mutex);
+}
+
+
+/*
+ * Listen to PM events to cache the firmware before suspend/hibernation
+ *
+ * When the device comes out of suspend, it might go into reset and
+ * firmware has to be uploaded again. At resume, most of the times, we
+ * can't load firmware images from disk, so we need to cache it.
+ *
+ * i2400m_fw_cache() will allocate a kobject and attach the firmware
+ * to it; that way we don't have to worry too much about the fw loader
+ * hitting a race condition.
+ *
+ * Note: modus operandi stolen from the Orinoco driver; thx.
+ */
+static
+int i2400m_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event,
+ void *unused)
+{
+ struct i2400m *i2400m =
+ container_of(notifier, struct i2400m, pm_notifier);
+ struct device *dev = i2400m_dev(i2400m);
+
+ d_fnstart(3, dev, "(i2400m %p pm_event %lx)\n", i2400m, pm_event);
+ switch (pm_event) {
+ case PM_HIBERNATION_PREPARE:
+ case PM_SUSPEND_PREPARE:
+ i2400m_fw_cache(i2400m);
+ break;
+ case PM_POST_RESTORE:
+ /* Restore from hibernation failed. We need to clean
+ * up in exactly the same way, so fall through. */
+ case PM_POST_HIBERNATION:
+ case PM_POST_SUSPEND:
+ i2400m_fw_uncache(i2400m);
+ break;
+
+ case PM_RESTORE_PREPARE:
+ default:
+ break;
+ }
+ d_fnend(3, dev, "(i2400m %p pm_event %lx) = void\n", i2400m, pm_event);
+ return NOTIFY_DONE;
+}
+
+
+/*
+ * pre-reset is called before a device is going on reset
+ *
+ * This has to be followed by a call to i2400m_post_reset(), otherwise
+ * bad things might happen.
+ */
+int i2400m_pre_reset(struct i2400m *i2400m)
+{
+ struct device *dev = i2400m_dev(i2400m);
+
+ d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+ d_printf(1, dev, "pre-reset shut down\n");
+
+ mutex_lock(&i2400m->init_mutex);
+ if (i2400m->updown) {
+ netif_tx_disable(i2400m->wimax_dev.net_dev);
+ __i2400m_dev_stop(i2400m);
+ /* down't set updown to zero -- this way
+ * post_reset can restore properly */
+ }
+ mutex_unlock(&i2400m->init_mutex);
+ if (i2400m->bus_release)
+ i2400m->bus_release(i2400m);
+ d_fnend(3, dev, "(i2400m %p) = 0\n", i2400m);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(i2400m_pre_reset);
+
+
+/*
+ * Restore device state after a reset
+ *
+ * Do the work needed after a device reset to bring it up to the same
+ * state as it was before the reset.
+ *
+ * NOTE: this requires i2400m->init_mutex taken
+ */
+int i2400m_post_reset(struct i2400m *i2400m)
+{
+ int result = 0;
+ struct device *dev = i2400m_dev(i2400m);
+
+ d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+ d_printf(1, dev, "post-reset start\n");
+ if (i2400m->bus_setup) {
+ result = i2400m->bus_setup(i2400m);
+ if (result < 0) {
+ dev_err(dev, "bus-specific setup failed: %d\n",
+ result);
+ goto error_bus_setup;
+ }
+ }
+ mutex_lock(&i2400m->init_mutex);
+ if (i2400m->updown) {
+ result = __i2400m_dev_start(
+ i2400m, I2400M_BRI_SOFT | I2400M_BRI_MAC_REINIT);
+ if (result < 0)
+ goto error_dev_start;
+ }
+ mutex_unlock(&i2400m->init_mutex);
+ d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
+ return result;
+
+error_dev_start:
+ if (i2400m->bus_release)
+ i2400m->bus_release(i2400m);
+ /* even if the device was up, it could not be recovered, so we
+ * mark it as down. */
+ i2400m->updown = 0;
+ wmb(); /* see i2400m->updown's documentation */
+ mutex_unlock(&i2400m->init_mutex);
+error_bus_setup:
+ d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
+ return result;
+}
+EXPORT_SYMBOL_GPL(i2400m_post_reset);
+
+
+/*
+ * The device has rebooted; fix up the device and the driver
+ *
+ * Tear down the driver communication with the device, reload the
+ * firmware and reinitialize the communication with the device.
+ *
+ * If someone calls a reset when the device's firmware is down, in
+ * theory we won't see it because we are not listening. However, just
+ * in case, leave the code to handle it.
+ *
+ * If there is a reset context, use it; this means someone is waiting
+ * for us to tell him when the reset operation is complete and the
+ * device is ready to rock again.
+ *
+ * NOTE: if we are in the process of bringing up or down the
+ * communication with the device [running i2400m_dev_start() or
+ * _stop()], don't do anything, let it fail and handle it.
+ *
+ * This function is ran always in a thread context
+ *
+ * This function gets passed, as payload to i2400m_work() a 'const
+ * char *' ptr with a "reason" why the reset happened (for messages).
+ */
+static
+void __i2400m_dev_reset_handle(struct work_struct *ws)
+{
+ struct i2400m *i2400m = container_of(ws, struct i2400m, reset_ws);
+ const char *reason = i2400m->reset_reason;
+ struct device *dev = i2400m_dev(i2400m);
+ struct i2400m_reset_ctx *ctx = i2400m->reset_ctx;
+ int result;
+
+ d_fnstart(3, dev, "(ws %p i2400m %p reason %s)\n", ws, i2400m, reason);
+
+ i2400m->boot_mode = 1;
+ wmb(); /* Make sure i2400m_msg_to_dev() sees boot_mode */
+
+ result = 0;
+ if (mutex_trylock(&i2400m->init_mutex) == 0) {
+ /* We are still in i2400m_dev_start() [let it fail] or
+ * i2400m_dev_stop() [we are shutting down anyway, so
+ * ignore it] or we are resetting somewhere else. */
+ dev_err(dev, "device rebooted somewhere else?\n");
+ i2400m_msg_to_dev_cancel_wait(i2400m, -EL3RST);
+ complete(&i2400m->msg_completion);
+ goto out;
+ }
+
+ dev_err(dev, "%s: reinitializing driver\n", reason);
+ rmb();
+ if (i2400m->updown) {
+ __i2400m_dev_stop(i2400m);
+ i2400m->updown = 0;
+ wmb(); /* see i2400m->updown's documentation */
+ }
+
+ if (i2400m->alive) {
+ result = __i2400m_dev_start(i2400m,
+ I2400M_BRI_SOFT | I2400M_BRI_MAC_REINIT);
+ if (result < 0) {
+ dev_err(dev, "%s: cannot start the device: %d\n",
+ reason, result);
+ result = -EUCLEAN;
+ if (atomic_read(&i2400m->bus_reset_retries)
+ >= I2400M_BUS_RESET_RETRIES) {
+ result = -ENODEV;
+ dev_err(dev, "tried too many times to "
+ "reset the device, giving up\n");
+ }
+ }
+ }
+
+ if (i2400m->reset_ctx) {
+ ctx->result = result;
+ complete(&ctx->completion);
+ }
+ mutex_unlock(&i2400m->init_mutex);
+ if (result == -EUCLEAN) {
+ /*
+ * We come here because the reset during operational mode
+ * wasn't successfully done and need to proceed to a bus
+ * reset. For the dev_reset_handle() to be able to handle
+ * the reset event later properly, we restore boot_mode back
+ * to the state before previous reset. ie: just like we are
+ * issuing the bus reset for the first time
+ */
+ i2400m->boot_mode = 0;
+ wmb();
+
+ atomic_inc(&i2400m->bus_reset_retries);
+ /* ops, need to clean up [w/ init_mutex not held] */
+ result = i2400m_reset(i2400m, I2400M_RT_BUS);
+ if (result >= 0)
+ result = -ENODEV;
+ } else {
+ rmb();
+ if (i2400m->alive) {
+ /* great, we expect the device state up and
+ * dev_start() actually brings the device state up */
+ i2400m->updown = 1;
+ wmb();
+ atomic_set(&i2400m->bus_reset_retries, 0);
+ }
+ }
+out:
+ d_fnend(3, dev, "(ws %p i2400m %p reason %s) = void\n",
+ ws, i2400m, reason);
+}
+
+
+/**
+ * i2400m_dev_reset_handle - Handle a device's reset in a thread context
+ *
+ * Schedule a device reset handling out on a thread context, so it
+ * is safe to call from atomic context. We can't use the i2400m's
+ * queue as we are going to destroy it and reinitialize it as part of
+ * the driver bringup/bringup process.
+ *
+ * See __i2400m_dev_reset_handle() for details; that takes care of
+ * reinitializing the driver to handle the reset, calling into the
+ * bus-specific functions ops as needed.
+ */
+int i2400m_dev_reset_handle(struct i2400m *i2400m, const char *reason)
+{
+ i2400m->reset_reason = reason;
+ return schedule_work(&i2400m->reset_ws);
+}
+EXPORT_SYMBOL_GPL(i2400m_dev_reset_handle);
+
+
+ /*
+ * The actual work of error recovery.
+ *
+ * The current implementation of error recovery is to trigger a bus reset.
+ */
+static
+void __i2400m_error_recovery(struct work_struct *ws)
+{
+ struct i2400m *i2400m = container_of(ws, struct i2400m, recovery_ws);
+
+ i2400m_reset(i2400m, I2400M_RT_BUS);
+}
+
+/*
+ * Schedule a work struct for error recovery.
+ *
+ * The intention of error recovery is to bring back the device to some
+ * known state whenever TX sees -110 (-ETIMEOUT) on copying the data to
+ * the device. The TX failure could mean a device bus stuck, so the current
+ * error recovery implementation is to trigger a bus reset to the device
+ * and hopefully it can bring back the device.
+ *
+ * The actual work of error recovery has to be in a thread context because
+ * it is kicked off in the TX thread (i2400ms->tx_workqueue) which is to be
+ * destroyed by the error recovery mechanism (currently a bus reset).
+ *
+ * Also, there may be already a queue of TX works that all hit
+ * the -ETIMEOUT error condition because the device is stuck already.
+ * Since bus reset is used as the error recovery mechanism and we don't
+ * want consecutive bus resets simply because the multiple TX works
+ * in the queue all hit the same device erratum, the flag "error_recovery"
+ * is introduced for preventing unwanted consecutive bus resets.
+ *
+ * Error recovery shall only be invoked again if previous one was completed.
+ * The flag error_recovery is set when error recovery mechanism is scheduled,
+ * and is checked when we need to schedule another error recovery. If it is
+ * in place already, then we shouldn't schedule another one.
+ */
+void i2400m_error_recovery(struct i2400m *i2400m)
+{
+ if (atomic_add_return(1, &i2400m->error_recovery) == 1)
+ schedule_work(&i2400m->recovery_ws);
+ else
+ atomic_dec(&i2400m->error_recovery);
+}
+EXPORT_SYMBOL_GPL(i2400m_error_recovery);
+
+/*
+ * Alloc the command and ack buffers for boot mode
+ *
+ * Get the buffers needed to deal with boot mode messages.
+ */
+static
+int i2400m_bm_buf_alloc(struct i2400m *i2400m)
+{
+ int result;
+
+ result = -ENOMEM;
+ i2400m->bm_cmd_buf = kzalloc(I2400M_BM_CMD_BUF_SIZE, GFP_KERNEL);
+ if (i2400m->bm_cmd_buf == NULL)
+ goto error_bm_cmd_kzalloc;
+ i2400m->bm_ack_buf = kzalloc(I2400M_BM_ACK_BUF_SIZE, GFP_KERNEL);
+ if (i2400m->bm_ack_buf == NULL)
+ goto error_bm_ack_buf_kzalloc;
+ return 0;
+
+error_bm_ack_buf_kzalloc:
+ kfree(i2400m->bm_cmd_buf);
+error_bm_cmd_kzalloc:
+ return result;
+}
+
+
+/*
+ * Free boot mode command and ack buffers.
+ */
+static
+void i2400m_bm_buf_free(struct i2400m *i2400m)
+{
+ kfree(i2400m->bm_ack_buf);
+ kfree(i2400m->bm_cmd_buf);
+}
+
+
+/**
+ * i2400m_init - Initialize a 'struct i2400m' from all zeroes
+ *
+ * This is a bus-generic API call.
+ */
+void i2400m_init(struct i2400m *i2400m)
+{
+ wimax_dev_init(&i2400m->wimax_dev);
+
+ i2400m->boot_mode = 1;
+ i2400m->rx_reorder = 1;
+ init_waitqueue_head(&i2400m->state_wq);
+
+ spin_lock_init(&i2400m->tx_lock);
+ i2400m->tx_pl_min = UINT_MAX;
+ i2400m->tx_size_min = UINT_MAX;
+
+ spin_lock_init(&i2400m->rx_lock);
+ i2400m->rx_pl_min = UINT_MAX;
+ i2400m->rx_size_min = UINT_MAX;
+ INIT_LIST_HEAD(&i2400m->rx_reports);
+ INIT_WORK(&i2400m->rx_report_ws, i2400m_report_hook_work);
+
+ mutex_init(&i2400m->msg_mutex);
+ init_completion(&i2400m->msg_completion);
+
+ mutex_init(&i2400m->init_mutex);
+ /* wake_tx_ws is initialized in i2400m_tx_setup() */
+
+ INIT_WORK(&i2400m->reset_ws, __i2400m_dev_reset_handle);
+ INIT_WORK(&i2400m->recovery_ws, __i2400m_error_recovery);
+
+ atomic_set(&i2400m->bus_reset_retries, 0);
+
+ i2400m->alive = 0;
+
+ /* initialize error_recovery to 1 for denoting we
+ * are not yet ready to take any error recovery */
+ atomic_set(&i2400m->error_recovery, 1);
+}
+EXPORT_SYMBOL_GPL(i2400m_init);
+
+
+int i2400m_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
+{
+ struct net_device *net_dev = i2400m->wimax_dev.net_dev;
+
+ /*
+ * Make sure we stop TXs and down the carrier before
+ * resetting; this is needed to avoid things like
+ * i2400m_wake_tx() scheduling stuff in parallel.
+ */
+ if (net_dev->reg_state == NETREG_REGISTERED) {
+ netif_tx_disable(net_dev);
+ netif_carrier_off(net_dev);
+ }
+ return i2400m->bus_reset(i2400m, rt);
+}
+EXPORT_SYMBOL_GPL(i2400m_reset);
+
+
+/**
+ * i2400m_setup - bus-generic setup function for the i2400m device
+ *
+ * @i2400m: device descriptor (bus-specific parts have been initialized)
+ *
+ * Returns: 0 if ok, < 0 errno code on error.
+ *
+ * Sets up basic device comunication infrastructure, boots the ROM to
+ * read the MAC address, registers with the WiMAX and network stacks
+ * and then brings up the device.
+ */
+int i2400m_setup(struct i2400m *i2400m, enum i2400m_bri bm_flags)
+{
+ int result = -ENODEV;
+ struct device *dev = i2400m_dev(i2400m);
+ struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
+ struct net_device *net_dev = i2400m->wimax_dev.net_dev;
+
+ d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+
+ snprintf(wimax_dev->name, sizeof(wimax_dev->name),
+ "i2400m-%s:%s", dev->bus->name, dev_name(dev));
+
+ result = i2400m_bm_buf_alloc(i2400m);
+ if (result < 0) {
+ dev_err(dev, "cannot allocate bootmode scratch buffers\n");
+ goto error_bm_buf_alloc;
+ }
+
+ if (i2400m->bus_setup) {
+ result = i2400m->bus_setup(i2400m);
+ if (result < 0) {
+ dev_err(dev, "bus-specific setup failed: %d\n",
+ result);
+ goto error_bus_setup;
+ }
+ }
+
+ result = i2400m_bootrom_init(i2400m, bm_flags);
+ if (result < 0) {
+ dev_err(dev, "read mac addr: bootrom init "
+ "failed: %d\n", result);
+ goto error_bootrom_init;
+ }
+ result = i2400m_read_mac_addr(i2400m);
+ if (result < 0)
+ goto error_read_mac_addr;
+ eth_random_addr(i2400m->src_mac_addr);
+
+ i2400m->pm_notifier.notifier_call = i2400m_pm_notifier;
+ register_pm_notifier(&i2400m->pm_notifier);
+
+ result = register_netdev(net_dev); /* Okey dokey, bring it up */
+ if (result < 0) {
+ dev_err(dev, "cannot register i2400m network device: %d\n",
+ result);
+ goto error_register_netdev;
+ }
+ netif_carrier_off(net_dev);
+
+ i2400m->wimax_dev.op_msg_from_user = i2400m_op_msg_from_user;
+ i2400m->wimax_dev.op_rfkill_sw_toggle = i2400m_op_rfkill_sw_toggle;
+ i2400m->wimax_dev.op_reset = i2400m_op_reset;
+
+ result = wimax_dev_add(&i2400m->wimax_dev, net_dev);
+ if (result < 0)
+ goto error_wimax_dev_add;
+
+ /* Now setup all that requires a registered net and wimax device. */
+ result = sysfs_create_group(&net_dev->dev.kobj, &i2400m_dev_attr_group);
+ if (result < 0) {
+ dev_err(dev, "cannot setup i2400m's sysfs: %d\n", result);
+ goto error_sysfs_setup;
+ }
+
+ result = i2400m_debugfs_add(i2400m);
+ if (result < 0) {
+ dev_err(dev, "cannot setup i2400m's debugfs: %d\n", result);
+ goto error_debugfs_setup;
+ }
+
+ result = i2400m_dev_start(i2400m, bm_flags);
+ if (result < 0)
+ goto error_dev_start;
+ d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
+ return result;
+
+error_dev_start:
+ i2400m_debugfs_rm(i2400m);
+error_debugfs_setup:
+ sysfs_remove_group(&i2400m->wimax_dev.net_dev->dev.kobj,
+ &i2400m_dev_attr_group);
+error_sysfs_setup:
+ wimax_dev_rm(&i2400m->wimax_dev);
+error_wimax_dev_add:
+ unregister_netdev(net_dev);
+error_register_netdev:
+ unregister_pm_notifier(&i2400m->pm_notifier);
+error_read_mac_addr:
+error_bootrom_init:
+ if (i2400m->bus_release)
+ i2400m->bus_release(i2400m);
+error_bus_setup:
+ i2400m_bm_buf_free(i2400m);
+error_bm_buf_alloc:
+ d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
+ return result;
+}
+EXPORT_SYMBOL_GPL(i2400m_setup);
+
+
+/**
+ * i2400m_release - release the bus-generic driver resources
+ *
+ * Sends a disconnect message and undoes any setup done by i2400m_setup()
+ */
+void i2400m_release(struct i2400m *i2400m)
+{
+ struct device *dev = i2400m_dev(i2400m);
+
+ d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+ netif_stop_queue(i2400m->wimax_dev.net_dev);
+
+ i2400m_dev_stop(i2400m);
+
+ cancel_work_sync(&i2400m->reset_ws);
+ cancel_work_sync(&i2400m->recovery_ws);
+
+ i2400m_debugfs_rm(i2400m);
+ sysfs_remove_group(&i2400m->wimax_dev.net_dev->dev.kobj,
+ &i2400m_dev_attr_group);
+ wimax_dev_rm(&i2400m->wimax_dev);
+ unregister_netdev(i2400m->wimax_dev.net_dev);
+ unregister_pm_notifier(&i2400m->pm_notifier);
+ if (i2400m->bus_release)
+ i2400m->bus_release(i2400m);
+ i2400m_bm_buf_free(i2400m);
+ d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
+}
+EXPORT_SYMBOL_GPL(i2400m_release);
+
+
+/*
+ * Debug levels control; see debug.h
+ */
+struct d_level D_LEVEL[] = {
+ D_SUBMODULE_DEFINE(control),
+ D_SUBMODULE_DEFINE(driver),
+ D_SUBMODULE_DEFINE(debugfs),
+ D_SUBMODULE_DEFINE(fw),
+ D_SUBMODULE_DEFINE(netdev),
+ D_SUBMODULE_DEFINE(rfkill),
+ D_SUBMODULE_DEFINE(rx),
+ D_SUBMODULE_DEFINE(sysfs),
+ D_SUBMODULE_DEFINE(tx),
+};
+size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+
+
+static
+int __init i2400m_driver_init(void)
+{
+ d_parse_params(D_LEVEL, D_LEVEL_SIZE, i2400m_debug_params,
+ "i2400m.debug");
+ return i2400m_barker_db_init(i2400m_barkers_params);
+}
+module_init(i2400m_driver_init);
+
+static
+void __exit i2400m_driver_exit(void)
+{
+ i2400m_barker_db_exit();
+}
+module_exit(i2400m_driver_exit);
+
+MODULE_AUTHOR("Intel Corporation <linux-wimax@intel.com>");
+MODULE_DESCRIPTION("Intel 2400M WiMAX networking bus-generic driver");
+MODULE_LICENSE("GPL");