Initial import

1 files changed, 5628 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
new file mode 100644
index 000000000..973485bd4
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -0,0 +1,5628 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "mac.h"
+
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+
+#include "hif.h"
+#include "core.h"
+#include "debug.h"
+#include "wmi.h"
+#include "htt.h"
+#include "txrx.h"
+#include "testmode.h"
+#include "wmi.h"
+#include "wmi-ops.h"
+
+/**********/
+/* Crypto */
+/**********/
+
+static int ath10k_send_key(struct ath10k_vif *arvif,
+			   struct ieee80211_key_conf *key,
+			   enum set_key_cmd cmd,
+			   const u8 *macaddr, bool def_idx)
+{
+	struct ath10k *ar = arvif->ar;
+	struct wmi_vdev_install_key_arg arg = {
+		.vdev_id = arvif->vdev_id,
+		.key_idx = key->keyidx,
+		.key_len = key->keylen,
+		.key_data = key->key,
+		.macaddr = macaddr,
+	};
+
+	lockdep_assert_held(&arvif->ar->conf_mutex);
+
+	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+		arg.key_flags = WMI_KEY_PAIRWISE;
+	else
+		arg.key_flags = WMI_KEY_GROUP;
+
+	switch (key->cipher) {
+	case WLAN_CIPHER_SUITE_CCMP:
+		arg.key_cipher = WMI_CIPHER_AES_CCM;
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV_MGMT;
+		break;
+	case WLAN_CIPHER_SUITE_TKIP:
+		arg.key_cipher = WMI_CIPHER_TKIP;
+		arg.key_txmic_len = 8;
+		arg.key_rxmic_len = 8;
+		break;
+	case WLAN_CIPHER_SUITE_WEP40:
+	case WLAN_CIPHER_SUITE_WEP104:
+		arg.key_cipher = WMI_CIPHER_WEP;
+		/* AP/IBSS mode requires self-key to be groupwise
+		 * Otherwise pairwise key must be set */
+		if (memcmp(macaddr, arvif->vif->addr, ETH_ALEN))
+			arg.key_flags = WMI_KEY_PAIRWISE;
+
+		if (def_idx)
+			arg.key_flags |= WMI_KEY_TX_USAGE;
+		break;
+	case WLAN_CIPHER_SUITE_AES_CMAC:
+		/* this one needs to be done in software */
+		return 1;
+	default:
+		ath10k_warn(ar, "cipher %d is not supported\n", key->cipher);
+		return -EOPNOTSUPP;
+	}
+
+	if (cmd == DISABLE_KEY) {
+		arg.key_cipher = WMI_CIPHER_NONE;
+		arg.key_data = NULL;
+	}
+
+	return ath10k_wmi_vdev_install_key(arvif->ar, &arg);
+}
+
+static int ath10k_install_key(struct ath10k_vif *arvif,
+			      struct ieee80211_key_conf *key,
+			      enum set_key_cmd cmd,
+			      const u8 *macaddr, bool def_idx)
+{
+	struct ath10k *ar = arvif->ar;
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	reinit_completion(&ar->install_key_done);
+
+	ret = ath10k_send_key(arvif, key, cmd, macaddr, def_idx);
+	if (ret)
+		return ret;
+
+	ret = wait_for_completion_timeout(&ar->install_key_done, 3*HZ);
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif,
+					const u8 *addr)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ath10k_peer *peer;
+	int ret;
+	int i;
+	bool def_idx;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!peer)
+		return -ENOENT;
+
+	for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) {
+		if (arvif->wep_keys[i] == NULL)
+			continue;
+		/* set TX_USAGE flag for default key id */
+		if (arvif->def_wep_key_idx == i)
+			def_idx = true;
+		else
+			def_idx = false;
+
+		ret = ath10k_install_key(arvif, arvif->wep_keys[i], SET_KEY,
+					 addr, def_idx);
+		if (ret)
+			return ret;
+
+		spin_lock_bh(&ar->data_lock);
+		peer->keys[i] = arvif->wep_keys[i];
+		spin_unlock_bh(&ar->data_lock);
+	}
+
+	return 0;
+}
+
+static int ath10k_clear_peer_keys(struct ath10k_vif *arvif,
+				  const u8 *addr)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ath10k_peer *peer;
+	int first_errno = 0;
+	int ret;
+	int i;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!peer)
+		return -ENOENT;
+
+	for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+		if (peer->keys[i] == NULL)
+			continue;
+
+		/* key flags are not required to delete the key */
+		ret = ath10k_install_key(arvif, peer->keys[i],
+					 DISABLE_KEY, addr, false);
+		if (ret && first_errno == 0)
+			first_errno = ret;
+
+		if (ret)
+			ath10k_warn(ar, "failed to remove peer wep key %d: %d\n",
+				    i, ret);
+
+		spin_lock_bh(&ar->data_lock);
+		peer->keys[i] = NULL;
+		spin_unlock_bh(&ar->data_lock);
+	}
+
+	return first_errno;
+}
+
+bool ath10k_mac_is_peer_wep_key_set(struct ath10k *ar, const u8 *addr,
+				    u8 keyidx)
+{
+	struct ath10k_peer *peer;
+	int i;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	/* We don't know which vdev this peer belongs to,
+	 * since WMI doesn't give us that information.
+	 *
+	 * FIXME: multi-bss needs to be handled.
+	 */
+	peer = ath10k_peer_find(ar, 0, addr);
+	if (!peer)
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+		if (peer->keys[i] && peer->keys[i]->keyidx == keyidx)
+			return true;
+	}
+
+	return false;
+}
+
+static int ath10k_clear_vdev_key(struct ath10k_vif *arvif,
+				 struct ieee80211_key_conf *key)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ath10k_peer *peer;
+	u8 addr[ETH_ALEN];
+	int first_errno = 0;
+	int ret;
+	int i;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	for (;;) {
+		/* since ath10k_install_key we can't hold data_lock all the
+		 * time, so we try to remove the keys incrementally */
+		spin_lock_bh(&ar->data_lock);
+		i = 0;
+		list_for_each_entry(peer, &ar->peers, list) {
+			for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+				if (peer->keys[i] == key) {
+					ether_addr_copy(addr, peer->addr);
+					peer->keys[i] = NULL;
+					break;
+				}
+			}
+
+			if (i < ARRAY_SIZE(peer->keys))
+				break;
+		}
+		spin_unlock_bh(&ar->data_lock);
+
+		if (i == ARRAY_SIZE(peer->keys))
+			break;
+		/* key flags are not required to delete the key */
+		ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr, false);
+		if (ret && first_errno == 0)
+			first_errno = ret;
+
+		if (ret)
+			ath10k_warn(ar, "failed to remove key for %pM: %d\n",
+				    addr, ret);
+	}
+
+	return first_errno;
+}
+
+/*********************/
+/* General utilities */
+/*********************/
+
+static inline enum wmi_phy_mode
+chan_to_phymode(const struct cfg80211_chan_def *chandef)
+{
+	enum wmi_phy_mode phymode = MODE_UNKNOWN;
+
+	switch (chandef->chan->band) {
+	case IEEE80211_BAND_2GHZ:
+		switch (chandef->width) {
+		case NL80211_CHAN_WIDTH_20_NOHT:
+			if (chandef->chan->flags & IEEE80211_CHAN_NO_OFDM)
+				phymode = MODE_11B;
+			else
+				phymode = MODE_11G;
+			break;
+		case NL80211_CHAN_WIDTH_20:
+			phymode = MODE_11NG_HT20;
+			break;
+		case NL80211_CHAN_WIDTH_40:
+			phymode = MODE_11NG_HT40;
+			break;
+		case NL80211_CHAN_WIDTH_5:
+		case NL80211_CHAN_WIDTH_10:
+		case NL80211_CHAN_WIDTH_80:
+		case NL80211_CHAN_WIDTH_80P80:
+		case NL80211_CHAN_WIDTH_160:
+			phymode = MODE_UNKNOWN;
+			break;
+		}
+		break;
+	case IEEE80211_BAND_5GHZ:
+		switch (chandef->width) {
+		case NL80211_CHAN_WIDTH_20_NOHT:
+			phymode = MODE_11A;
+			break;
+		case NL80211_CHAN_WIDTH_20:
+			phymode = MODE_11NA_HT20;
+			break;
+		case NL80211_CHAN_WIDTH_40:
+			phymode = MODE_11NA_HT40;
+			break;
+		case NL80211_CHAN_WIDTH_80:
+			phymode = MODE_11AC_VHT80;
+			break;
+		case NL80211_CHAN_WIDTH_5:
+		case NL80211_CHAN_WIDTH_10:
+		case NL80211_CHAN_WIDTH_80P80:
+		case NL80211_CHAN_WIDTH_160:
+			phymode = MODE_UNKNOWN;
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	WARN_ON(phymode == MODE_UNKNOWN);
+	return phymode;
+}
+
+static u8 ath10k_parse_mpdudensity(u8 mpdudensity)
+{
+/*
+ * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
+ *   0 for no restriction
+ *   1 for 1/4 us
+ *   2 for 1/2 us
+ *   3 for 1 us
+ *   4 for 2 us
+ *   5 for 4 us
+ *   6 for 8 us
+ *   7 for 16 us
+ */
+	switch (mpdudensity) {
+	case 0:
+		return 0;
+	case 1:
+	case 2:
+	case 3:
+	/* Our lower layer calculations limit our precision to
+	   1 microsecond */
+		return 1;
+	case 4:
+		return 2;
+	case 5:
+		return 4;
+	case 6:
+		return 8;
+	case 7:
+		return 16;
+	default:
+		return 0;
+	}
+}
+
+static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (ar->num_peers >= ar->max_num_peers)
+		return -ENOBUFS;
+
+	ret = ath10k_wmi_peer_create(ar, vdev_id, addr);
+	if (ret) {
+		ath10k_warn(ar, "failed to create wmi peer %pM on vdev %i: %i\n",
+			    addr, vdev_id, ret);
+		return ret;
+	}
+
+	ret = ath10k_wait_for_peer_created(ar, vdev_id, addr);
+	if (ret) {
+		ath10k_warn(ar, "failed to wait for created wmi peer %pM on vdev %i: %i\n",
+			    addr, vdev_id, ret);
+		return ret;
+	}
+
+	ar->num_peers++;
+
+	return 0;
+}
+
+static int ath10k_mac_set_kickout(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 param;
+	int ret;
+
+	param = ar->wmi.pdev_param->sta_kickout_th;
+	ret = ath10k_wmi_pdev_set_param(ar, param,
+					ATH10K_KICKOUT_THRESHOLD);
+	if (ret) {
+		ath10k_warn(ar, "failed to set kickout threshold on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	param = ar->wmi.vdev_param->ap_keepalive_min_idle_inactive_time_secs;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+					ATH10K_KEEPALIVE_MIN_IDLE);
+	if (ret) {
+		ath10k_warn(ar, "failed to set keepalive minimum idle time on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	param = ar->wmi.vdev_param->ap_keepalive_max_idle_inactive_time_secs;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+					ATH10K_KEEPALIVE_MAX_IDLE);
+	if (ret) {
+		ath10k_warn(ar, "failed to set keepalive maximum idle time on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	param = ar->wmi.vdev_param->ap_keepalive_max_unresponsive_time_secs;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+					ATH10K_KEEPALIVE_MAX_UNRESPONSIVE);
+	if (ret) {
+		ath10k_warn(ar, "failed to set keepalive maximum unresponsive time on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 vdev_param;
+
+	vdev_param = ar->wmi.vdev_param->rts_threshold;
+	return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value);
+}
+
+static int ath10k_mac_set_frag(struct ath10k_vif *arvif, u32 value)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 vdev_param;
+
+	if (value != 0xFFFFFFFF)
+		value = clamp_t(u32, arvif->ar->hw->wiphy->frag_threshold,
+				ATH10K_FRAGMT_THRESHOLD_MIN,
+				ATH10K_FRAGMT_THRESHOLD_MAX);
+
+	vdev_param = ar->wmi.vdev_param->fragmentation_threshold;
+	return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value);
+}
+
+static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_wmi_peer_delete(ar, vdev_id, addr);
+	if (ret)
+		return ret;
+
+	ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr);
+	if (ret)
+		return ret;
+
+	ar->num_peers--;
+
+	return 0;
+}
+
+static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id)
+{
+	struct ath10k_peer *peer, *tmp;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	list_for_each_entry_safe(peer, tmp, &ar->peers, list) {
+		if (peer->vdev_id != vdev_id)
+			continue;
+
+		ath10k_warn(ar, "removing stale peer %pM from vdev_id %d\n",
+			    peer->addr, vdev_id);
+
+		list_del(&peer->list);
+		kfree(peer);
+		ar->num_peers--;
+	}
+	spin_unlock_bh(&ar->data_lock);
+}
+
+static void ath10k_peer_cleanup_all(struct ath10k *ar)
+{
+	struct ath10k_peer *peer, *tmp;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	list_for_each_entry_safe(peer, tmp, &ar->peers, list) {
+		list_del(&peer->list);
+		kfree(peer);
+	}
+	spin_unlock_bh(&ar->data_lock);
+
+	ar->num_peers = 0;
+	ar->num_stations = 0;
+}
+
+/************************/
+/* Interface management */
+/************************/
+
+void ath10k_mac_vif_beacon_free(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	if (!arvif->beacon)
+		return;
+
+	if (!arvif->beacon_buf)
+		dma_unmap_single(ar->dev, ATH10K_SKB_CB(arvif->beacon)->paddr,
+				 arvif->beacon->len, DMA_TO_DEVICE);
+
+	if (WARN_ON(arvif->beacon_state != ATH10K_BEACON_SCHEDULED &&
+		    arvif->beacon_state != ATH10K_BEACON_SENT))
+		return;
+
+	dev_kfree_skb_any(arvif->beacon);
+
+	arvif->beacon = NULL;
+	arvif->beacon_state = ATH10K_BEACON_SCHEDULED;
+}
+
+static void ath10k_mac_vif_beacon_cleanup(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+
+	lockdep_assert_held(&ar->data_lock);
+
+	ath10k_mac_vif_beacon_free(arvif);
+
+	if (arvif->beacon_buf) {
+		dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
+				  arvif->beacon_buf, arvif->beacon_paddr);
+		arvif->beacon_buf = NULL;
+	}
+}
+
+static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags))
+		return -ESHUTDOWN;
+
+	ret = wait_for_completion_timeout(&ar->vdev_setup_done,
+					  ATH10K_VDEV_SETUP_TIMEOUT_HZ);
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
+{
+	struct cfg80211_chan_def *chandef = &ar->chandef;
+	struct ieee80211_channel *channel = chandef->chan;
+	struct wmi_vdev_start_request_arg arg = {};
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	arg.vdev_id = vdev_id;
+	arg.channel.freq = channel->center_freq;
+	arg.channel.band_center_freq1 = chandef->center_freq1;
+
+	/* TODO setup this dynamically, what in case we
+	   don't have any vifs? */
+	arg.channel.mode = chan_to_phymode(chandef);
+	arg.channel.chan_radar =
+			!!(channel->flags & IEEE80211_CHAN_RADAR);
+
+	arg.channel.min_power = 0;
+	arg.channel.max_power = channel->max_power * 2;
+	arg.channel.max_reg_power = channel->max_reg_power * 2;
+	arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
+
+	reinit_completion(&ar->vdev_setup_done);
+
+	ret = ath10k_wmi_vdev_start(ar, &arg);
+	if (ret) {
+		ath10k_warn(ar, "failed to request monitor vdev %i start: %d\n",
+			    vdev_id, ret);
+		return ret;
+	}
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to synchronize setup for monitor vdev %i start: %d\n",
+			    vdev_id, ret);
+		return ret;
+	}
+
+	ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr);
+	if (ret) {
+		ath10k_warn(ar, "failed to put up monitor vdev %i: %d\n",
+			    vdev_id, ret);
+		goto vdev_stop;
+	}
+
+	ar->monitor_vdev_id = vdev_id;
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i started\n",
+		   ar->monitor_vdev_id);
+	return 0;
+
+vdev_stop:
+	ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
+	if (ret)
+		ath10k_warn(ar, "failed to stop monitor vdev %i after start failure: %d\n",
+			    ar->monitor_vdev_id, ret);
+
+	return ret;
+}
+
+static int ath10k_monitor_vdev_stop(struct ath10k *ar)
+{
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_wmi_vdev_down(ar, ar->monitor_vdev_id);
+	if (ret)
+		ath10k_warn(ar, "failed to put down monitor vdev %i: %d\n",
+			    ar->monitor_vdev_id, ret);
+
+	reinit_completion(&ar->vdev_setup_done);
+
+	ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
+	if (ret)
+		ath10k_warn(ar, "failed to to request monitor vdev %i stop: %d\n",
+			    ar->monitor_vdev_id, ret);
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret)
+		ath10k_warn(ar, "failed to synchronize monitor vdev %i stop: %d\n",
+			    ar->monitor_vdev_id, ret);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i stopped\n",
+		   ar->monitor_vdev_id);
+	return ret;
+}
+
+static int ath10k_monitor_vdev_create(struct ath10k *ar)
+{
+	int bit, ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (ar->free_vdev_map == 0) {
+		ath10k_warn(ar, "failed to find free vdev id for monitor vdev\n");
+		return -ENOMEM;
+	}
+
+	bit = __ffs64(ar->free_vdev_map);
+
+	ar->monitor_vdev_id = bit;
+
+	ret = ath10k_wmi_vdev_create(ar, ar->monitor_vdev_id,
+				     WMI_VDEV_TYPE_MONITOR,
+				     0, ar->mac_addr);
+	if (ret) {
+		ath10k_warn(ar, "failed to request monitor vdev %i creation: %d\n",
+			    ar->monitor_vdev_id, ret);
+		return ret;
+	}
+
+	ar->free_vdev_map &= ~(1LL << ar->monitor_vdev_id);
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d created\n",
+		   ar->monitor_vdev_id);
+
+	return 0;
+}
+
+static int ath10k_monitor_vdev_delete(struct ath10k *ar)
+{
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id);
+	if (ret) {
+		ath10k_warn(ar, "failed to request wmi monitor vdev %i removal: %d\n",
+			    ar->monitor_vdev_id, ret);
+		return ret;
+	}
+
+	ar->free_vdev_map |= 1LL << ar->monitor_vdev_id;
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n",
+		   ar->monitor_vdev_id);
+	return ret;
+}
+
+static int ath10k_monitor_start(struct ath10k *ar)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_monitor_vdev_create(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to create monitor vdev: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_monitor_vdev_start(ar, ar->monitor_vdev_id);
+	if (ret) {
+		ath10k_warn(ar, "failed to start monitor vdev: %d\n", ret);
+		ath10k_monitor_vdev_delete(ar);
+		return ret;
+	}
+
+	ar->monitor_started = true;
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor started\n");
+
+	return 0;
+}
+
+static int ath10k_monitor_stop(struct ath10k *ar)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_monitor_vdev_stop(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to stop monitor vdev: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_monitor_vdev_delete(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to delete monitor vdev: %d\n", ret);
+		return ret;
+	}
+
+	ar->monitor_started = false;
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor stopped\n");
+
+	return 0;
+}
+
+static int ath10k_monitor_recalc(struct ath10k *ar)
+{
+	bool should_start;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	should_start = ar->monitor ||
+		       ar->filter_flags & FIF_PROMISC_IN_BSS ||
+		       test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac monitor recalc started? %d should? %d\n",
+		   ar->monitor_started, should_start);
+
+	if (should_start == ar->monitor_started)
+		return 0;
+
+	if (should_start)
+		return ath10k_monitor_start(ar);
+
+	return ath10k_monitor_stop(ar);
+}
+
+static int ath10k_recalc_rtscts_prot(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 vdev_param, rts_cts = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	vdev_param = ar->wmi.vdev_param->enable_rtscts;
+
+	if (arvif->use_cts_prot || arvif->num_legacy_stations > 0)
+		rts_cts |= SM(WMI_RTSCTS_ENABLED, WMI_RTSCTS_SET);
+
+	if (arvif->num_legacy_stations > 0)
+		rts_cts |= SM(WMI_RTSCTS_ACROSS_SW_RETRIES,
+			      WMI_RTSCTS_PROFILE);
+
+	return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+					 rts_cts);
+}
+
+static int ath10k_start_cac(struct ath10k *ar)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	set_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+
+	ret = ath10k_monitor_recalc(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to start monitor (cac): %d\n", ret);
+		clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+		return ret;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac start monitor vdev %d\n",
+		   ar->monitor_vdev_id);
+
+	return 0;
+}
+
+static int ath10k_stop_cac(struct ath10k *ar)
+{
+	lockdep_assert_held(&ar->conf_mutex);
+
+	/* CAC is not running - do nothing */
+	if (!test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags))
+		return 0;
+
+	clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+	ath10k_monitor_stop(ar);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac finished\n");
+
+	return 0;
+}
+
+static void ath10k_recalc_radar_detection(struct ath10k *ar)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ath10k_stop_cac(ar);
+
+	if (!ar->radar_enabled)
+		return;
+
+	if (ar->num_started_vdevs > 0)
+		return;
+
+	ret = ath10k_start_cac(ar);
+	if (ret) {
+		/*
+		 * Not possible to start CAC on current channel so starting
+		 * radiation is not allowed, make this channel DFS_UNAVAILABLE
+		 * by indicating that radar was detected.
+		 */
+		ath10k_warn(ar, "failed to start CAC: %d\n", ret);
+		ieee80211_radar_detected(ar->hw);
+	}
+}
+
+static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, bool restart)
+{
+	struct ath10k *ar = arvif->ar;
+	struct cfg80211_chan_def *chandef = &ar->chandef;
+	struct wmi_vdev_start_request_arg arg = {};
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	reinit_completion(&ar->vdev_setup_done);
+
+	arg.vdev_id = arvif->vdev_id;
+	arg.dtim_period = arvif->dtim_period;
+	arg.bcn_intval = arvif->beacon_interval;
+
+	arg.channel.freq = chandef->chan->center_freq;
+	arg.channel.band_center_freq1 = chandef->center_freq1;
+	arg.channel.mode = chan_to_phymode(chandef);
+
+	arg.channel.min_power = 0;
+	arg.channel.max_power = chandef->chan->max_power * 2;
+	arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
+	arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2;
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		arg.ssid = arvif->u.ap.ssid;
+		arg.ssid_len = arvif->u.ap.ssid_len;
+		arg.hidden_ssid = arvif->u.ap.hidden_ssid;
+
+		/* For now allow DFS for AP mode */
+		arg.channel.chan_radar =
+			!!(chandef->chan->flags & IEEE80211_CHAN_RADAR);
+	} else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
+		arg.ssid = arvif->vif->bss_conf.ssid;
+		arg.ssid_len = arvif->vif->bss_conf.ssid_len;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac vdev %d start center_freq %d phymode %s\n",
+		   arg.vdev_id, arg.channel.freq,
+		   ath10k_wmi_phymode_str(arg.channel.mode));
+
+	if (restart)
+		ret = ath10k_wmi_vdev_restart(ar, &arg);
+	else
+		ret = ath10k_wmi_vdev_start(ar, &arg);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to start WMI vdev %i: %d\n",
+			    arg.vdev_id, ret);
+		return ret;
+	}
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret) {
+		ath10k_warn(ar,
+			    "failed to synchronize setup for vdev %i restart %d: %d\n",
+			    arg.vdev_id, restart, ret);
+		return ret;
+	}
+
+	ar->num_started_vdevs++;
+	ath10k_recalc_radar_detection(ar);
+
+	return ret;
+}
+
+static int ath10k_vdev_start(struct ath10k_vif *arvif)
+{
+	return ath10k_vdev_start_restart(arvif, false);
+}
+
+static int ath10k_vdev_restart(struct ath10k_vif *arvif)
+{
+	return ath10k_vdev_start_restart(arvif, true);
+}
+
+static int ath10k_vdev_stop(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	reinit_completion(&ar->vdev_setup_done);
+
+	ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id);
+	if (ret) {
+		ath10k_warn(ar, "failed to stop WMI vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to synchronize setup for vdev %i stop: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	WARN_ON(ar->num_started_vdevs == 0);
+
+	if (ar->num_started_vdevs != 0) {
+		ar->num_started_vdevs--;
+		ath10k_recalc_radar_detection(ar);
+	}
+
+	return ret;
+}
+
+static int ath10k_mac_setup_bcn_p2p_ie(struct ath10k_vif *arvif,
+				       struct sk_buff *bcn)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_mgmt *mgmt;
+	const u8 *p2p_ie;
+	int ret;
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
+		return 0;
+
+	if (arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+		return 0;
+
+	mgmt = (void *)bcn->data;
+	p2p_ie = cfg80211_find_vendor_ie(WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
+					 mgmt->u.beacon.variable,
+					 bcn->len - (mgmt->u.beacon.variable -
+						     bcn->data));
+	if (!p2p_ie)
+		return -ENOENT;
+
+	ret = ath10k_wmi_p2p_go_bcn_ie(ar, arvif->vdev_id, p2p_ie);
+	if (ret) {
+		ath10k_warn(ar, "failed to submit p2p go bcn ie for vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_mac_remove_vendor_ie(struct sk_buff *skb, unsigned int oui,
+				       u8 oui_type, size_t ie_offset)
+{
+	size_t len;
+	const u8 *next;
+	const u8 *end;
+	u8 *ie;
+
+	if (WARN_ON(skb->len < ie_offset))
+		return -EINVAL;
+
+	ie = (u8 *)cfg80211_find_vendor_ie(oui, oui_type,
+					   skb->data + ie_offset,
+					   skb->len - ie_offset);
+	if (!ie)
+		return -ENOENT;
+
+	len = ie[1] + 2;
+	end = skb->data + skb->len;
+	next = ie + len;
+
+	if (WARN_ON(next > end))
+		return -EINVAL;
+
+	memmove(ie, next, end - next);
+	skb_trim(skb, skb->len - len);
+
+	return 0;
+}
+
+static int ath10k_mac_setup_bcn_tmpl(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_hw *hw = ar->hw;
+	struct ieee80211_vif *vif = arvif->vif;
+	struct ieee80211_mutable_offsets offs = {};
+	struct sk_buff *bcn;
+	int ret;
+
+	if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
+		return 0;
+
+	bcn = ieee80211_beacon_get_template(hw, vif, &offs);
+	if (!bcn) {
+		ath10k_warn(ar, "failed to get beacon template from mac80211\n");
+		return -EPERM;
+	}
+
+	ret = ath10k_mac_setup_bcn_p2p_ie(arvif, bcn);
+	if (ret) {
+		ath10k_warn(ar, "failed to setup p2p go bcn ie: %d\n", ret);
+		kfree_skb(bcn);
+		return ret;
+	}
+
+	/* P2P IE is inserted by firmware automatically (as configured above)
+	 * so remove it from the base beacon template to avoid duplicate P2P
+	 * IEs in beacon frames.
+	 */
+	ath10k_mac_remove_vendor_ie(bcn, WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
+				    offsetof(struct ieee80211_mgmt,
+					     u.beacon.variable));
+
+	ret = ath10k_wmi_bcn_tmpl(ar, arvif->vdev_id, offs.tim_offset, bcn, 0,
+				  0, NULL, 0);
+	kfree_skb(bcn);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to submit beacon template command: %d\n",
+			    ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_hw *hw = ar->hw;
+	struct ieee80211_vif *vif = arvif->vif;
+	struct sk_buff *prb;
+	int ret;
+
+	if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
+		return 0;
+
+	prb = ieee80211_proberesp_get(hw, vif);
+	if (!prb) {
+		ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
+		return -EPERM;
+	}
+
+	ret = ath10k_wmi_prb_tmpl(ar, arvif->vdev_id, prb);
+	kfree_skb(prb);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to submit probe resp template command: %d\n",
+			    ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ath10k_control_beaconing(struct ath10k_vif *arvif,
+				     struct ieee80211_bss_conf *info)
+{
+	struct ath10k *ar = arvif->ar;
+	int ret = 0;
+
+	lockdep_assert_held(&arvif->ar->conf_mutex);
+
+	if (!info->enable_beacon) {
+		ath10k_vdev_stop(arvif);
+
+		arvif->is_started = false;
+		arvif->is_up = false;
+
+		spin_lock_bh(&arvif->ar->data_lock);
+		ath10k_mac_vif_beacon_free(arvif);
+		spin_unlock_bh(&arvif->ar->data_lock);
+
+		return;
+	}
+
+	arvif->tx_seq_no = 0x1000;
+
+	ret = ath10k_vdev_start(arvif);
+	if (ret)
+		return;
+
+	arvif->aid = 0;
+	ether_addr_copy(arvif->bssid, info->bssid);
+
+	ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
+				 arvif->bssid);
+	if (ret) {
+		ath10k_warn(ar, "failed to bring up vdev %d: %i\n",
+			    arvif->vdev_id, ret);
+		ath10k_vdev_stop(arvif);
+		return;
+	}
+
+	arvif->is_started = true;
+	arvif->is_up = true;
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
+}
+
+static void ath10k_control_ibss(struct ath10k_vif *arvif,
+				struct ieee80211_bss_conf *info,
+				const u8 self_peer[ETH_ALEN])
+{
+	struct ath10k *ar = arvif->ar;
+	u32 vdev_param;
+	int ret = 0;
+
+	lockdep_assert_held(&arvif->ar->conf_mutex);
+
+	if (!info->ibss_joined) {
+		ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, self_peer);
+		if (ret)
+			ath10k_warn(ar, "failed to delete IBSS self peer %pM for vdev %d: %d\n",
+				    self_peer, arvif->vdev_id, ret);
+
+		if (is_zero_ether_addr(arvif->bssid))
+			return;
+
+		eth_zero_addr(arvif->bssid);
+
+		return;
+	}
+
+	ret = ath10k_peer_create(arvif->ar, arvif->vdev_id, self_peer);
+	if (ret) {
+		ath10k_warn(ar, "failed to create IBSS self peer %pM for vdev %d: %d\n",
+			    self_peer, arvif->vdev_id, ret);
+		return;
+	}
+
+	vdev_param = arvif->ar->wmi.vdev_param->atim_window;
+	ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id, vdev_param,
+					ATH10K_DEFAULT_ATIM);
+	if (ret)
+		ath10k_warn(ar, "failed to set IBSS ATIM for vdev %d: %d\n",
+			    arvif->vdev_id, ret);
+}
+
+static int ath10k_mac_vif_recalc_ps_wake_threshold(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 param;
+	u32 value;
+	int ret;
+
+	lockdep_assert_held(&arvif->ar->conf_mutex);
+
+	if (arvif->u.sta.uapsd)
+		value = WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER;
+	else
+		value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
+
+	param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
+	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, value);
+	if (ret) {
+		ath10k_warn(ar, "failed to submit ps wake threshold %u on vdev %i: %d\n",
+			    value, arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_mac_vif_recalc_ps_poll_count(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 param;
+	u32 value;
+	int ret;
+
+	lockdep_assert_held(&arvif->ar->conf_mutex);
+
+	if (arvif->u.sta.uapsd)
+		value = WMI_STA_PS_PSPOLL_COUNT_UAPSD;
+	else
+		value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
+
+	param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
+	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+					  param, value);
+	if (ret) {
+		ath10k_warn(ar, "failed to submit ps poll count %u on vdev %i: %d\n",
+			    value, arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_mac_ps_vif_count(struct ath10k *ar)
+{
+	struct ath10k_vif *arvif;
+	int num = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	list_for_each_entry(arvif, &ar->arvifs, list)
+		if (arvif->ps)
+			num++;
+
+	return num;
+}
+
+static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_vif *vif = arvif->vif;
+	struct ieee80211_conf *conf = &ar->hw->conf;
+	enum wmi_sta_powersave_param param;
+	enum wmi_sta_ps_mode psmode;
+	int ret;
+	int ps_timeout;
+	bool enable_ps;
+
+	lockdep_assert_held(&arvif->ar->conf_mutex);
+
+	if (arvif->vif->type != NL80211_IFTYPE_STATION)
+		return 0;
+
+	enable_ps = arvif->ps;
+
+	if (enable_ps && ath10k_mac_ps_vif_count(ar) > 1 &&
+	    !test_bit(ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT,
+		      ar->fw_features)) {
+		ath10k_warn(ar, "refusing to enable ps on vdev %i: not supported by fw\n",
+			    arvif->vdev_id);
+		enable_ps = false;
+	}
+
+	if (enable_ps) {
+		psmode = WMI_STA_PS_MODE_ENABLED;
+		param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
+
+		ps_timeout = conf->dynamic_ps_timeout;
+		if (ps_timeout == 0) {
+			/* Firmware doesn't like 0 */
+			ps_timeout = ieee80211_tu_to_usec(
+				vif->bss_conf.beacon_int) / 1000;
+		}
+
+		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param,
+						  ps_timeout);
+		if (ret) {
+			ath10k_warn(ar, "failed to set inactivity time for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
+			return ret;
+		}
+	} else {
+		psmode = WMI_STA_PS_MODE_DISABLED;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d psmode %s\n",
+		   arvif->vdev_id, psmode ? "enable" : "disable");
+
+	ret = ath10k_wmi_set_psmode(ar, arvif->vdev_id, psmode);
+	if (ret) {
+		ath10k_warn(ar, "failed to set PS Mode %d for vdev %d: %d\n",
+			    psmode, arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_mac_vif_disable_keepalive(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	struct wmi_sta_keepalive_arg arg = {};
+	int ret;
+
+	lockdep_assert_held(&arvif->ar->conf_mutex);
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
+		return 0;
+
+	if (!test_bit(WMI_SERVICE_STA_KEEP_ALIVE, ar->wmi.svc_map))
+		return 0;
+
+	/* Some firmware revisions have a bug and ignore the `enabled` field.
+	 * Instead use the interval to disable the keepalive.
+	 */
+	arg.vdev_id = arvif->vdev_id;
+	arg.enabled = 1;
+	arg.method = WMI_STA_KEEPALIVE_METHOD_NULL_FRAME;
+	arg.interval = WMI_STA_KEEPALIVE_INTERVAL_DISABLE;
+
+	ret = ath10k_wmi_sta_keepalive(ar, &arg);
+	if (ret) {
+		ath10k_warn(ar, "failed to submit keepalive on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**********************/
+/* Station management */
+/**********************/
+
+static u32 ath10k_peer_assoc_h_listen_intval(struct ath10k *ar,
+					     struct ieee80211_vif *vif)
+{
+	/* Some firmware revisions have unstable STA powersave when listen
+	 * interval is set too high (e.g. 5). The symptoms are firmware doesn't
+	 * generate NullFunc frames properly even if buffered frames have been
+	 * indicated in Beacon TIM. Firmware would seldom wake up to pull
+	 * buffered frames. Often pinging the device from AP would simply fail.
+	 *
+	 * As a workaround set it to 1.
+	 */
+	if (vif->type == NL80211_IFTYPE_STATION)
+		return 1;
+
+	return ar->hw->conf.listen_interval;
+}
+
+static void ath10k_peer_assoc_h_basic(struct ath10k *ar,
+				      struct ieee80211_vif *vif,
+				      struct ieee80211_sta *sta,
+				      struct wmi_peer_assoc_complete_arg *arg)
+{
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ether_addr_copy(arg->addr, sta->addr);
+	arg->vdev_id = arvif->vdev_id;
+	arg->peer_aid = sta->aid;
+	arg->peer_flags |= WMI_PEER_AUTH;
+	arg->peer_listen_intval = ath10k_peer_assoc_h_listen_intval(ar, vif);
+	arg->peer_num_spatial_streams = 1;
+	arg->peer_caps = vif->bss_conf.assoc_capability;
+}
+
+static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
+				       struct ieee80211_vif *vif,
+				       struct wmi_peer_assoc_complete_arg *arg)
+{
+	struct ieee80211_bss_conf *info = &vif->bss_conf;
+	struct cfg80211_bss *bss;
+	const u8 *rsnie = NULL;
+	const u8 *wpaie = NULL;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	bss = cfg80211_get_bss(ar->hw->wiphy, ar->hw->conf.chandef.chan,
+			       info->bssid, NULL, 0, IEEE80211_BSS_TYPE_ANY,
+			       IEEE80211_PRIVACY_ANY);
+	if (bss) {
+		const struct cfg80211_bss_ies *ies;
+
+		rcu_read_lock();
+		rsnie = ieee80211_bss_get_ie(bss, WLAN_EID_RSN);
+
+		ies = rcu_dereference(bss->ies);
+
+		wpaie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
+						WLAN_OUI_TYPE_MICROSOFT_WPA,
+						ies->data,
+						ies->len);
+		rcu_read_unlock();
+		cfg80211_put_bss(ar->hw->wiphy, bss);
+	}
+
+	/* FIXME: base on RSN IE/WPA IE is a correct idea? */
+	if (rsnie || wpaie) {
+		ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__);
+		arg->peer_flags |= WMI_PEER_NEED_PTK_4_WAY;
+	}
+
+	if (wpaie) {
+		ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__);
+		arg->peer_flags |= WMI_PEER_NEED_GTK_2_WAY;
+	}
+}
+
+static void ath10k_peer_assoc_h_rates(struct ath10k *ar,
+				      struct ieee80211_sta *sta,
+				      struct wmi_peer_assoc_complete_arg *arg)
+{
+	struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates;
+	const struct ieee80211_supported_band *sband;
+	const struct ieee80211_rate *rates;
+	u32 ratemask;
+	int i;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	sband = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band];
+	ratemask = sta->supp_rates[ar->hw->conf.chandef.chan->band];
+	rates = sband->bitrates;
+
+	rateset->num_rates = 0;
+
+	for (i = 0; i < 32; i++, ratemask >>= 1, rates++) {
+		if (!(ratemask & 1))
+			continue;
+
+		rateset->rates[rateset->num_rates] = rates->hw_value;
+		rateset->num_rates++;
+	}
+}
+
+static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
+				   struct ieee80211_sta *sta,
+				   struct wmi_peer_assoc_complete_arg *arg)
+{
+	const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+	int i, n;
+	u32 stbc;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (!ht_cap->ht_supported)
+		return;
+
+	arg->peer_flags |= WMI_PEER_HT;
+	arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
+				    ht_cap->ampdu_factor)) - 1;
+
+	arg->peer_mpdu_density =
+		ath10k_parse_mpdudensity(ht_cap->ampdu_density);
+
+	arg->peer_ht_caps = ht_cap->cap;
+	arg->peer_rate_caps |= WMI_RC_HT_FLAG;
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)
+		arg->peer_flags |= WMI_PEER_LDPC;
+
+	if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) {
+		arg->peer_flags |= WMI_PEER_40MHZ;
+		arg->peer_rate_caps |= WMI_RC_CW40_FLAG;
+	}
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20)
+		arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40)
+		arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) {
+		arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG;
+		arg->peer_flags |= WMI_PEER_STBC;
+	}
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) {
+		stbc = ht_cap->cap & IEEE80211_HT_CAP_RX_STBC;
+		stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT;
+		stbc = stbc << WMI_RC_RX_STBC_FLAG_S;
+		arg->peer_rate_caps |= stbc;
+		arg->peer_flags |= WMI_PEER_STBC;
+	}
+
+	if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2])
+		arg->peer_rate_caps |= WMI_RC_TS_FLAG;
+	else if (ht_cap->mcs.rx_mask[1])
+		arg->peer_rate_caps |= WMI_RC_DS_FLAG;
+
+	for (i = 0, n = 0; i < IEEE80211_HT_MCS_MASK_LEN*8; i++)
+		if (ht_cap->mcs.rx_mask[i/8] & (1 << i%8))
+			arg->peer_ht_rates.rates[n++] = i;
+
+	/*
+	 * This is a workaround for HT-enabled STAs which break the spec
+	 * and have no HT capabilities RX mask (no HT RX MCS map).
+	 *
+	 * As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
+	 * MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.
+	 *
+	 * Firmware asserts if such situation occurs.
+	 */
+	if (n == 0) {
+		arg->peer_ht_rates.num_rates = 8;
+		for (i = 0; i < arg->peer_ht_rates.num_rates; i++)
+			arg->peer_ht_rates.rates[i] = i;
+	} else {
+		arg->peer_ht_rates.num_rates = n;
+		arg->peer_num_spatial_streams = sta->rx_nss;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
+		   arg->addr,
+		   arg->peer_ht_rates.num_rates,
+		   arg->peer_num_spatial_streams);
+}
+
+static int ath10k_peer_assoc_qos_ap(struct ath10k *ar,
+				    struct ath10k_vif *arvif,
+				    struct ieee80211_sta *sta)
+{
+	u32 uapsd = 0;
+	u32 max_sp = 0;
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (sta->wme && sta->uapsd_queues) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n",
+			   sta->uapsd_queues, sta->max_sp);
+
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
+			uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN;
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
+			uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN;
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
+			uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN;
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
+			uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN;
+
+		if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP)
+			max_sp = sta->max_sp;
+
+		ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+						 sta->addr,
+						 WMI_AP_PS_PEER_PARAM_UAPSD,
+						 uapsd);
+		if (ret) {
+			ath10k_warn(ar, "failed to set ap ps peer param uapsd for vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+			return ret;
+		}
+
+		ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+						 sta->addr,
+						 WMI_AP_PS_PEER_PARAM_MAX_SP,
+						 max_sp);
+		if (ret) {
+			ath10k_warn(ar, "failed to set ap ps peer param max sp for vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+			return ret;
+		}
+
+		/* TODO setup this based on STA listen interval and
+		   beacon interval. Currently we don't know
+		   sta->listen_interval - mac80211 patch required.
+		   Currently use 10 seconds */
+		ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, sta->addr,
+						 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME,
+						 10);
+		if (ret) {
+			ath10k_warn(ar, "failed to set ap ps peer param ageout time for vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
+				    struct ieee80211_sta *sta,
+				    struct wmi_peer_assoc_complete_arg *arg)
+{
+	const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
+	u8 ampdu_factor;
+
+	if (!vht_cap->vht_supported)
+		return;
+
+	arg->peer_flags |= WMI_PEER_VHT;
+
+	if (ar->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ)
+		arg->peer_flags |= WMI_PEER_VHT_2G;
+
+	arg->peer_vht_caps = vht_cap->cap;
+
+	ampdu_factor = (vht_cap->cap &
+			IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >>
+		       IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
+
+	/* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to
+	 * zero in VHT IE. Using it would result in degraded throughput.
+	 * arg->peer_max_mpdu at this point contains HT max_mpdu so keep
+	 * it if VHT max_mpdu is smaller. */
+	arg->peer_max_mpdu = max(arg->peer_max_mpdu,
+				 (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR +
+					ampdu_factor)) - 1);
+
+	if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
+		arg->peer_flags |= WMI_PEER_80MHZ;
+
+	arg->peer_vht_rates.rx_max_rate =
+		__le16_to_cpu(vht_cap->vht_mcs.rx_highest);
+	arg->peer_vht_rates.rx_mcs_set =
+		__le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map);
+	arg->peer_vht_rates.tx_max_rate =
+		__le16_to_cpu(vht_cap->vht_mcs.tx_highest);
+	arg->peer_vht_rates.tx_mcs_set =
+		__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
+		   sta->addr, arg->peer_max_mpdu, arg->peer_flags);
+}
+
+static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_sta *sta,
+				    struct wmi_peer_assoc_complete_arg *arg)
+{
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+	switch (arvif->vdev_type) {
+	case WMI_VDEV_TYPE_AP:
+		if (sta->wme)
+			arg->peer_flags |= WMI_PEER_QOS;
+
+		if (sta->wme && sta->uapsd_queues) {
+			arg->peer_flags |= WMI_PEER_APSD;
+			arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG;
+		}
+		break;
+	case WMI_VDEV_TYPE_STA:
+		if (vif->bss_conf.qos)
+			arg->peer_flags |= WMI_PEER_QOS;
+		break;
+	case WMI_VDEV_TYPE_IBSS:
+		if (sta->wme)
+			arg->peer_flags |= WMI_PEER_QOS;
+		break;
+	default:
+		break;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n",
+		   sta->addr, !!(arg->peer_flags & WMI_PEER_QOS));
+}
+
+static bool ath10k_mac_sta_has_11g_rates(struct ieee80211_sta *sta)
+{
+	/* First 4 rates in ath10k_rates are CCK (11b) rates. */
+	return sta->supp_rates[IEEE80211_BAND_2GHZ] >> 4;
+}
+
+static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
+					struct ieee80211_vif *vif,
+					struct ieee80211_sta *sta,
+					struct wmi_peer_assoc_complete_arg *arg)
+{
+	enum wmi_phy_mode phymode = MODE_UNKNOWN;
+
+	switch (ar->hw->conf.chandef.chan->band) {
+	case IEEE80211_BAND_2GHZ:
+		if (sta->vht_cap.vht_supported) {
+			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+				phymode = MODE_11AC_VHT40;
+			else
+				phymode = MODE_11AC_VHT20;
+		} else if (sta->ht_cap.ht_supported) {
+			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+				phymode = MODE_11NG_HT40;
+			else
+				phymode = MODE_11NG_HT20;
+		} else if (ath10k_mac_sta_has_11g_rates(sta)) {
+			phymode = MODE_11G;
+		} else {
+			phymode = MODE_11B;
+		}
+
+		break;
+	case IEEE80211_BAND_5GHZ:
+		/*
+		 * Check VHT first.
+		 */
+		if (sta->vht_cap.vht_supported) {
+			if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
+				phymode = MODE_11AC_VHT80;
+			else if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+				phymode = MODE_11AC_VHT40;
+			else if (sta->bandwidth == IEEE80211_STA_RX_BW_20)
+				phymode = MODE_11AC_VHT20;
+		} else if (sta->ht_cap.ht_supported) {
+			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+				phymode = MODE_11NA_HT40;
+			else
+				phymode = MODE_11NA_HT20;
+		} else {
+			phymode = MODE_11A;
+		}
+
+		break;
+	default:
+		break;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM phymode %s\n",
+		   sta->addr, ath10k_wmi_phymode_str(phymode));
+
+	arg->peer_phymode = phymode;
+	WARN_ON(phymode == MODE_UNKNOWN);
+}
+
+static int ath10k_peer_assoc_prepare(struct ath10k *ar,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_sta *sta,
+				     struct wmi_peer_assoc_complete_arg *arg)
+{
+	lockdep_assert_held(&ar->conf_mutex);
+
+	memset(arg, 0, sizeof(*arg));
+
+	ath10k_peer_assoc_h_basic(ar, vif, sta, arg);
+	ath10k_peer_assoc_h_crypto(ar, vif, arg);
+	ath10k_peer_assoc_h_rates(ar, sta, arg);
+	ath10k_peer_assoc_h_ht(ar, sta, arg);
+	ath10k_peer_assoc_h_vht(ar, sta, arg);
+	ath10k_peer_assoc_h_qos(ar, vif, sta, arg);
+	ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);
+
+	return 0;
+}
+
+static const u32 ath10k_smps_map[] = {
+	[WLAN_HT_CAP_SM_PS_STATIC] = WMI_PEER_SMPS_STATIC,
+	[WLAN_HT_CAP_SM_PS_DYNAMIC] = WMI_PEER_SMPS_DYNAMIC,
+	[WLAN_HT_CAP_SM_PS_INVALID] = WMI_PEER_SMPS_PS_NONE,
+	[WLAN_HT_CAP_SM_PS_DISABLED] = WMI_PEER_SMPS_PS_NONE,
+};
+
+static int ath10k_setup_peer_smps(struct ath10k *ar, struct ath10k_vif *arvif,
+				  const u8 *addr,
+				  const struct ieee80211_sta_ht_cap *ht_cap)
+{
+	int smps;
+
+	if (!ht_cap->ht_supported)
+		return 0;
+
+	smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
+	smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+	if (smps >= ARRAY_SIZE(ath10k_smps_map))
+		return -EINVAL;
+
+	return ath10k_wmi_peer_set_param(ar, arvif->vdev_id, addr,
+					 WMI_PEER_SMPS_STATE,
+					 ath10k_smps_map[smps]);
+}
+
+static int ath10k_mac_vif_recalc_txbf(struct ath10k *ar,
+				      struct ieee80211_vif *vif,
+				      struct ieee80211_sta_vht_cap vht_cap)
+{
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret;
+	u32 param;
+	u32 value;
+
+	if (!(ar->vht_cap_info &
+	      (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
+	       IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
+	       IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
+	       IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
+		return 0;
+
+	param = ar->wmi.vdev_param->txbf;
+	value = 0;
+
+	if (WARN_ON(param == WMI_VDEV_PARAM_UNSUPPORTED))
+		return 0;
+
+	/* The following logic is correct. If a remote STA advertises support
+	 * for being a beamformer then we should enable us being a beamformee.
+	 */
+
+	if (ar->vht_cap_info &
+	    (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
+	     IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) {
+		if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)
+			value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE;
+
+		if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)
+			value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFEE;
+	}
+
+	if (ar->vht_cap_info &
+	    (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
+	     IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) {
+		if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE)
+			value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER;
+
+		if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)
+			value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFER;
+	}
+
+	if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFEE)
+		value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE;
+
+	if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFER)
+		value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER;
+
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, value);
+	if (ret) {
+		ath10k_warn(ar, "failed to submit vdev param txbf 0x%x: %d\n",
+			    value, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/* can be called only in mac80211 callbacks due to `key_count` usage */
+static void ath10k_bss_assoc(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_bss_conf *bss_conf)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ieee80211_sta_ht_cap ht_cap;
+	struct ieee80211_sta_vht_cap vht_cap;
+	struct wmi_peer_assoc_complete_arg peer_arg;
+	struct ieee80211_sta *ap_sta;
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i assoc bssid %pM aid %d\n",
+		   arvif->vdev_id, arvif->bssid, arvif->aid);
+
+	rcu_read_lock();
+
+	ap_sta = ieee80211_find_sta(vif, bss_conf->bssid);
+	if (!ap_sta) {
+		ath10k_warn(ar, "failed to find station entry for bss %pM vdev %i\n",
+			    bss_conf->bssid, arvif->vdev_id);
+		rcu_read_unlock();
+		return;
+	}
+
+	/* ap_sta must be accessed only within rcu section which must be left
+	 * before calling ath10k_setup_peer_smps() which might sleep. */
+	ht_cap = ap_sta->ht_cap;
+	vht_cap = ap_sta->vht_cap;
+
+	ret = ath10k_peer_assoc_prepare(ar, vif, ap_sta, &peer_arg);
+	if (ret) {
+		ath10k_warn(ar, "failed to prepare peer assoc for %pM vdev %i: %d\n",
+			    bss_conf->bssid, arvif->vdev_id, ret);
+		rcu_read_unlock();
+		return;
+	}
+
+	rcu_read_unlock();
+
+	ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
+	if (ret) {
+		ath10k_warn(ar, "failed to run peer assoc for %pM vdev %i: %d\n",
+			    bss_conf->bssid, arvif->vdev_id, ret);
+		return;
+	}
+
+	ret = ath10k_setup_peer_smps(ar, arvif, bss_conf->bssid, &ht_cap);
+	if (ret) {
+		ath10k_warn(ar, "failed to setup peer SMPS for vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return;
+	}
+
+	ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap);
+	if (ret) {
+		ath10k_warn(ar, "failed to recalc txbf for vdev %i on bss %pM: %d\n",
+			    arvif->vdev_id, bss_conf->bssid, ret);
+		return;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac vdev %d up (associated) bssid %pM aid %d\n",
+		   arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
+
+	WARN_ON(arvif->is_up);
+
+	arvif->aid = bss_conf->aid;
+	ether_addr_copy(arvif->bssid, bss_conf->bssid);
+
+	ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, arvif->aid, arvif->bssid);
+	if (ret) {
+		ath10k_warn(ar, "failed to set vdev %d up: %d\n",
+			    arvif->vdev_id, ret);
+		return;
+	}
+
+	arvif->is_up = true;
+
+	/* Workaround: Some firmware revisions (tested with qca6174
+	 * WLAN.RM.2.0-00073) have buggy powersave state machine and must be
+	 * poked with peer param command.
+	 */
+	ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, arvif->bssid,
+					WMI_PEER_DUMMY_VAR, 1);
+	if (ret) {
+		ath10k_warn(ar, "failed to poke peer %pM param for ps workaround on vdev %i: %d\n",
+			    arvif->bssid, arvif->vdev_id, ret);
+		return;
+	}
+}
+
+static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ieee80211_sta_vht_cap vht_cap = {};
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i disassoc bssid %pM\n",
+		   arvif->vdev_id, arvif->bssid);
+
+	ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+	if (ret)
+		ath10k_warn(ar, "faield to down vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+
+	arvif->def_wep_key_idx = -1;
+
+	ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap);
+	if (ret) {
+		ath10k_warn(ar, "failed to recalc txbf for vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return;
+	}
+
+	arvif->is_up = false;
+}
+
+static int ath10k_station_assoc(struct ath10k *ar,
+				struct ieee80211_vif *vif,
+				struct ieee80211_sta *sta,
+				bool reassoc)
+{
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct wmi_peer_assoc_complete_arg peer_arg;
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_peer_assoc_prepare(ar, vif, sta, &peer_arg);
+	if (ret) {
+		ath10k_warn(ar, "failed to prepare WMI peer assoc for %pM vdev %i: %i\n",
+			    sta->addr, arvif->vdev_id, ret);
+		return ret;
+	}
+
+	peer_arg.peer_reassoc = reassoc;
+	ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
+	if (ret) {
+		ath10k_warn(ar, "failed to run peer assoc for STA %pM vdev %i: %d\n",
+			    sta->addr, arvif->vdev_id, ret);
+		return ret;
+	}
+
+	/* Re-assoc is run only to update supported rates for given station. It
+	 * doesn't make much sense to reconfigure the peer completely.
+	 */
+	if (!reassoc) {
+		ret = ath10k_setup_peer_smps(ar, arvif, sta->addr,
+					     &sta->ht_cap);
+		if (ret) {
+			ath10k_warn(ar, "failed to setup peer SMPS for vdev %d: %d\n",
+				    arvif->vdev_id, ret);
+			return ret;
+		}
+
+		ret = ath10k_peer_assoc_qos_ap(ar, arvif, sta);
+		if (ret) {
+			ath10k_warn(ar, "failed to set qos params for STA %pM for vdev %i: %d\n",
+				    sta->addr, arvif->vdev_id, ret);
+			return ret;
+		}
+
+		if (!sta->wme) {
+			arvif->num_legacy_stations++;
+			ret  = ath10k_recalc_rtscts_prot(arvif);
+			if (ret) {
+				ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
+					    arvif->vdev_id, ret);
+				return ret;
+			}
+		}
+
+		/* Plumb cached keys only for static WEP */
+		if (arvif->def_wep_key_idx != -1) {
+			ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
+			if (ret) {
+				ath10k_warn(ar, "failed to install peer wep keys for vdev %i: %d\n",
+					    arvif->vdev_id, ret);
+				return ret;
+			}
+		}
+	}
+
+	return ret;
+}
+
+static int ath10k_station_disassoc(struct ath10k *ar,
+				   struct ieee80211_vif *vif,
+				   struct ieee80211_sta *sta)
+{
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (!sta->wme) {
+		arvif->num_legacy_stations--;
+		ret = ath10k_recalc_rtscts_prot(arvif);
+		if (ret) {
+			ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
+				    arvif->vdev_id, ret);
+			return ret;
+		}
+	}
+
+	ret = ath10k_clear_peer_keys(arvif, sta->addr);
+	if (ret) {
+		ath10k_warn(ar, "failed to clear all peer wep keys for vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+/**************/
+/* Regulatory */
+/**************/
+
+static int ath10k_update_channel_list(struct ath10k *ar)
+{
+	struct ieee80211_hw *hw = ar->hw;
+	struct ieee80211_supported_band **bands;
+	enum ieee80211_band band;
+	struct ieee80211_channel *channel;
+	struct wmi_scan_chan_list_arg arg = {0};
+	struct wmi_channel_arg *ch;
+	bool passive;
+	int len;
+	int ret;
+	int i;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	bands = hw->wiphy->bands;
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		if (!bands[band])
+			continue;
+
+		for (i = 0; i < bands[band]->n_channels; i++) {
+			if (bands[band]->channels[i].flags &
+			    IEEE80211_CHAN_DISABLED)
+				continue;
+
+			arg.n_channels++;
+		}
+	}
+
+	len = sizeof(struct wmi_channel_arg) * arg.n_channels;
+	arg.channels = kzalloc(len, GFP_KERNEL);
+	if (!arg.channels)
+		return -ENOMEM;
+
+	ch = arg.channels;
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		if (!bands[band])
+			continue;
+
+		for (i = 0; i < bands[band]->n_channels; i++) {
+			channel = &bands[band]->channels[i];
+
+			if (channel->flags & IEEE80211_CHAN_DISABLED)
+				continue;
+
+			ch->allow_ht   = true;
+
+			/* FIXME: when should we really allow VHT? */
+			ch->allow_vht = true;
+
+			ch->allow_ibss =
+				!(channel->flags & IEEE80211_CHAN_NO_IR);
+
+			ch->ht40plus =
+				!(channel->flags & IEEE80211_CHAN_NO_HT40PLUS);
+
+			ch->chan_radar =
+				!!(channel->flags & IEEE80211_CHAN_RADAR);
+
+			passive = channel->flags & IEEE80211_CHAN_NO_IR;
+			ch->passive = passive;
+
+			ch->freq = channel->center_freq;
+			ch->band_center_freq1 = channel->center_freq;
+			ch->min_power = 0;
+			ch->max_power = channel->max_power * 2;
+			ch->max_reg_power = channel->max_reg_power * 2;
+			ch->max_antenna_gain = channel->max_antenna_gain * 2;
+			ch->reg_class_id = 0; /* FIXME */
+
+			/* FIXME: why use only legacy modes, why not any
+			 * HT/VHT modes? Would that even make any
+			 * difference? */
+			if (channel->band == IEEE80211_BAND_2GHZ)
+				ch->mode = MODE_11G;
+			else
+				ch->mode = MODE_11A;
+
+			if (WARN_ON_ONCE(ch->mode == MODE_UNKNOWN))
+				continue;
+
+			ath10k_dbg(ar, ATH10K_DBG_WMI,
+				   "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
+				    ch - arg.channels, arg.n_channels,
+				   ch->freq, ch->max_power, ch->max_reg_power,
+				   ch->max_antenna_gain, ch->mode);
+
+			ch++;
+		}
+	}
+
+	ret = ath10k_wmi_scan_chan_list(ar, &arg);
+	kfree(arg.channels);
+
+	return ret;
+}
+
+static enum wmi_dfs_region
+ath10k_mac_get_dfs_region(enum nl80211_dfs_regions dfs_region)
+{
+	switch (dfs_region) {
+	case NL80211_DFS_UNSET:
+		return WMI_UNINIT_DFS_DOMAIN;
+	case NL80211_DFS_FCC:
+		return WMI_FCC_DFS_DOMAIN;
+	case NL80211_DFS_ETSI:
+		return WMI_ETSI_DFS_DOMAIN;
+	case NL80211_DFS_JP:
+		return WMI_MKK4_DFS_DOMAIN;
+	}
+	return WMI_UNINIT_DFS_DOMAIN;
+}
+
+static void ath10k_regd_update(struct ath10k *ar)
+{
+	struct reg_dmn_pair_mapping *regpair;
+	int ret;
+	enum wmi_dfs_region wmi_dfs_reg;
+	enum nl80211_dfs_regions nl_dfs_reg;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_update_channel_list(ar);
+	if (ret)
+		ath10k_warn(ar, "failed to update channel list: %d\n", ret);
+
+	regpair = ar->ath_common.regulatory.regpair;
+
+	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
+		nl_dfs_reg = ar->dfs_detector->region;
+		wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg);
+	} else {
+		wmi_dfs_reg = WMI_UNINIT_DFS_DOMAIN;
+	}
+
+	/* Target allows setting up per-band regdomain but ath_common provides
+	 * a combined one only */
+	ret = ath10k_wmi_pdev_set_regdomain(ar,
+					    regpair->reg_domain,
+					    regpair->reg_domain, /* 2ghz */
+					    regpair->reg_domain, /* 5ghz */
+					    regpair->reg_2ghz_ctl,
+					    regpair->reg_5ghz_ctl,
+					    wmi_dfs_reg);
+	if (ret)
+		ath10k_warn(ar, "failed to set pdev regdomain: %d\n", ret);
+}
+
+static void ath10k_reg_notifier(struct wiphy *wiphy,
+				struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct ath10k *ar = hw->priv;
+	bool result;
+
+	ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);
+
+	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
+		ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "dfs region 0x%x\n",
+			   request->dfs_region);
+		result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector,
+							  request->dfs_region);
+		if (!result)
+			ath10k_warn(ar, "DFS region 0x%X not supported, will trigger radar for every pulse\n",
+				    request->dfs_region);
+	}
+
+	mutex_lock(&ar->conf_mutex);
+	if (ar->state == ATH10K_STATE_ON)
+		ath10k_regd_update(ar);
+	mutex_unlock(&ar->conf_mutex);
+}
+
+/***************/
+/* TX handlers */
+/***************/
+
+static u8 ath10k_tx_h_get_tid(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_is_mgmt(hdr->frame_control))
+		return HTT_DATA_TX_EXT_TID_MGMT;
+
+	if (!ieee80211_is_data_qos(hdr->frame_control))
+		return HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
+
+	if (!is_unicast_ether_addr(ieee80211_get_DA(hdr)))
+		return HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
+
+	return ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
+}
+
+static u8 ath10k_tx_h_get_vdev_id(struct ath10k *ar, struct ieee80211_vif *vif)
+{
+	if (vif)
+		return ath10k_vif_to_arvif(vif)->vdev_id;
+
+	if (ar->monitor_started)
+		return ar->monitor_vdev_id;
+
+	ath10k_warn(ar, "failed to resolve vdev id\n");
+	return 0;
+}
+
+/* HTT Tx uses Native Wifi tx mode which expects 802.11 frames without QoS
+ * Control in the header.
+ */
+static void ath10k_tx_h_nwifi(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (void *)skb->data;
+	struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
+	u8 *qos_ctl;
+
+	if (!ieee80211_is_data_qos(hdr->frame_control))
+		return;
+
+	qos_ctl = ieee80211_get_qos_ctl(hdr);
+	memmove(skb->data + IEEE80211_QOS_CTL_LEN,
+		skb->data, (void *)qos_ctl - (void *)skb->data);
+	skb_pull(skb, IEEE80211_QOS_CTL_LEN);
+
+	/* Fw/Hw generates a corrupted QoS Control Field for QoS NullFunc
+	 * frames. Powersave is handled by the fw/hw so QoS NyllFunc frames are
+	 * used only for CQM purposes (e.g. hostapd station keepalive ping) so
+	 * it is safe to downgrade to NullFunc.
+	 */
+	hdr = (void *)skb->data;
+	if (ieee80211_is_qos_nullfunc(hdr->frame_control)) {
+		hdr->frame_control &= ~__cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
+		cb->htt.tid = HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
+	}
+}
+
+static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar,
+				       struct ieee80211_vif *vif,
+				       struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+	/* This is case only for P2P_GO */
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP ||
+	    arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+		return;
+
+	if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) {
+		spin_lock_bh(&ar->data_lock);
+		if (arvif->u.ap.noa_data)
+			if (!pskb_expand_head(skb, 0, arvif->u.ap.noa_len,
+					      GFP_ATOMIC))
+				memcpy(skb_put(skb, arvif->u.ap.noa_len),
+				       arvif->u.ap.noa_data,
+				       arvif->u.ap.noa_len);
+		spin_unlock_bh(&ar->data_lock);
+	}
+}
+
+static bool ath10k_mac_need_offchan_tx_work(struct ath10k *ar)
+{
+	/* FIXME: Not really sure since when the behaviour changed. At some
+	 * point new firmware stopped requiring creation of peer entries for
+	 * offchannel tx (and actually creating them causes issues with wmi-htc
+	 * tx credit replenishment and reliability). Assuming it's at least 3.4
+	 * because that's when the `freq` was introduced to TX_FRM HTT command.
+	 */
+	return !(ar->htt.target_version_major >= 3 &&
+		 ar->htt.target_version_minor >= 4);
+}
+
+static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	int ret = 0;
+
+	if (ar->htt.target_version_major >= 3) {
+		/* Since HTT 3.0 there is no separate mgmt tx command */
+		ret = ath10k_htt_tx(&ar->htt, skb);
+		goto exit;
+	}
+
+	if (ieee80211_is_mgmt(hdr->frame_control)) {
+		if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
+			     ar->fw_features)) {
+			if (skb_queue_len(&ar->wmi_mgmt_tx_queue) >=
+			    ATH10K_MAX_NUM_MGMT_PENDING) {
+				ath10k_warn(ar, "reached WMI management transmit queue limit\n");
+				ret = -EBUSY;
+				goto exit;
+			}
+
+			skb_queue_tail(&ar->wmi_mgmt_tx_queue, skb);
+			ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
+		} else {
+			ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
+		}
+	} else if (!test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
+			     ar->fw_features) &&
+		   ieee80211_is_nullfunc(hdr->frame_control)) {
+		/* FW does not report tx status properly for NullFunc frames
+		 * unless they are sent through mgmt tx path. mac80211 sends
+		 * those frames when it detects link/beacon loss and depends
+		 * on the tx status to be correct. */
+		ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
+	} else {
+		ret = ath10k_htt_tx(&ar->htt, skb);
+	}
+
+exit:
+	if (ret) {
+		ath10k_warn(ar, "failed to transmit packet, dropping: %d\n",
+			    ret);
+		ieee80211_free_txskb(ar->hw, skb);
+	}
+}
+
+void ath10k_offchan_tx_purge(struct ath10k *ar)
+{
+	struct sk_buff *skb;
+
+	for (;;) {
+		skb = skb_dequeue(&ar->offchan_tx_queue);
+		if (!skb)
+			break;
+
+		ieee80211_free_txskb(ar->hw, skb);
+	}
+}
+
+void ath10k_offchan_tx_work(struct work_struct *work)
+{
+	struct ath10k *ar = container_of(work, struct ath10k, offchan_tx_work);
+	struct ath10k_peer *peer;
+	struct ieee80211_hdr *hdr;
+	struct sk_buff *skb;
+	const u8 *peer_addr;
+	int vdev_id;
+	int ret;
+
+	/* FW requirement: We must create a peer before FW will send out
+	 * an offchannel frame. Otherwise the frame will be stuck and
+	 * never transmitted. We delete the peer upon tx completion.
+	 * It is unlikely that a peer for offchannel tx will already be
+	 * present. However it may be in some rare cases so account for that.
+	 * Otherwise we might remove a legitimate peer and break stuff. */
+
+	for (;;) {
+		skb = skb_dequeue(&ar->offchan_tx_queue);
+		if (!skb)
+			break;
+
+		mutex_lock(&ar->conf_mutex);
+
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %p\n",
+			   skb);
+
+		hdr = (struct ieee80211_hdr *)skb->data;
+		peer_addr = ieee80211_get_DA(hdr);
+		vdev_id = ATH10K_SKB_CB(skb)->vdev_id;
+
+		spin_lock_bh(&ar->data_lock);
+		peer = ath10k_peer_find(ar, vdev_id, peer_addr);
+		spin_unlock_bh(&ar->data_lock);
+
+		if (peer)
+			/* FIXME: should this use ath10k_warn()? */
+			ath10k_dbg(ar, ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
+				   peer_addr, vdev_id);
+
+		if (!peer) {
+			ret = ath10k_peer_create(ar, vdev_id, peer_addr);
+			if (ret)
+				ath10k_warn(ar, "failed to create peer %pM on vdev %d: %d\n",
+					    peer_addr, vdev_id, ret);
+		}
+
+		spin_lock_bh(&ar->data_lock);
+		reinit_completion(&ar->offchan_tx_completed);
+		ar->offchan_tx_skb = skb;
+		spin_unlock_bh(&ar->data_lock);
+
+		ath10k_tx_htt(ar, skb);
+
+		ret = wait_for_completion_timeout(&ar->offchan_tx_completed,
+						  3 * HZ);
+		if (ret == 0)
+			ath10k_warn(ar, "timed out waiting for offchannel skb %p\n",
+				    skb);
+
+		if (!peer) {
+			ret = ath10k_peer_delete(ar, vdev_id, peer_addr);
+			if (ret)
+				ath10k_warn(ar, "failed to delete peer %pM on vdev %d: %d\n",
+					    peer_addr, vdev_id, ret);
+		}
+
+		mutex_unlock(&ar->conf_mutex);
+	}
+}
+
+void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar)
+{
+	struct sk_buff *skb;
+
+	for (;;) {
+		skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
+		if (!skb)
+			break;
+
+		ieee80211_free_txskb(ar->hw, skb);
+	}
+}
+
+void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
+{
+	struct ath10k *ar = container_of(work, struct ath10k, wmi_mgmt_tx_work);
+	struct sk_buff *skb;
+	int ret;
+
+	for (;;) {
+		skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
+		if (!skb)
+			break;
+
+		ret = ath10k_wmi_mgmt_tx(ar, skb);
+		if (ret) {
+			ath10k_warn(ar, "failed to transmit management frame via WMI: %d\n",
+				    ret);
+			ieee80211_free_txskb(ar->hw, skb);
+		}
+	}
+}
+
+/************/
+/* Scanning */
+/************/
+
+void __ath10k_scan_finish(struct ath10k *ar)
+{
+	lockdep_assert_held(&ar->data_lock);
+
+	switch (ar->scan.state) {
+	case ATH10K_SCAN_IDLE:
+		break;
+	case ATH10K_SCAN_RUNNING:
+		if (ar->scan.is_roc)
+			ieee80211_remain_on_channel_expired(ar->hw);
+		/* fall through */
+	case ATH10K_SCAN_ABORTING:
+		if (!ar->scan.is_roc)
+			ieee80211_scan_completed(ar->hw,
+						 (ar->scan.state ==
+						  ATH10K_SCAN_ABORTING));
+		/* fall through */
+	case ATH10K_SCAN_STARTING:
+		ar->scan.state = ATH10K_SCAN_IDLE;
+		ar->scan_channel = NULL;
+		ath10k_offchan_tx_purge(ar);
+		cancel_delayed_work(&ar->scan.timeout);
+		complete_all(&ar->scan.completed);
+		break;
+	}
+}
+
+void ath10k_scan_finish(struct ath10k *ar)
+{
+	spin_lock_bh(&ar->data_lock);
+	__ath10k_scan_finish(ar);
+	spin_unlock_bh(&ar->data_lock);
+}
+
+static int ath10k_scan_stop(struct ath10k *ar)
+{
+	struct wmi_stop_scan_arg arg = {
+		.req_id = 1, /* FIXME */
+		.req_type = WMI_SCAN_STOP_ONE,
+		.u.scan_id = ATH10K_SCAN_ID,
+	};
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_wmi_stop_scan(ar, &arg);
+	if (ret) {
+		ath10k_warn(ar, "failed to stop wmi scan: %d\n", ret);
+		goto out;
+	}
+
+	ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ);
+	if (ret == 0) {
+		ath10k_warn(ar, "failed to receive scan abortion completion: timed out\n");
+		ret = -ETIMEDOUT;
+	} else if (ret > 0) {
+		ret = 0;
+	}
+
+out:
+	/* Scan state should be updated upon scan completion but in case
+	 * firmware fails to deliver the event (for whatever reason) it is
+	 * desired to clean up scan state anyway. Firmware may have just
+	 * dropped the scan completion event delivery due to transport pipe
+	 * being overflown with data and/or it can recover on its own before
+	 * next scan request is submitted.
+	 */
+	spin_lock_bh(&ar->data_lock);
+	if (ar->scan.state != ATH10K_SCAN_IDLE)
+		__ath10k_scan_finish(ar);
+	spin_unlock_bh(&ar->data_lock);
+
+	return ret;
+}
+
+static void ath10k_scan_abort(struct ath10k *ar)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+
+	switch (ar->scan.state) {
+	case ATH10K_SCAN_IDLE:
+		/* This can happen if timeout worker kicked in and called
+		 * abortion while scan completion was being processed.
+		 */
+		break;
+	case ATH10K_SCAN_STARTING:
+	case ATH10K_SCAN_ABORTING:
+		ath10k_warn(ar, "refusing scan abortion due to invalid scan state: %s (%d)\n",
+			    ath10k_scan_state_str(ar->scan.state),
+			    ar->scan.state);
+		break;
+	case ATH10K_SCAN_RUNNING:
+		ar->scan.state = ATH10K_SCAN_ABORTING;
+		spin_unlock_bh(&ar->data_lock);
+
+		ret = ath10k_scan_stop(ar);
+		if (ret)
+			ath10k_warn(ar, "failed to abort scan: %d\n", ret);
+
+		spin_lock_bh(&ar->data_lock);
+		break;
+	}
+
+	spin_unlock_bh(&ar->data_lock);
+}
+
+void ath10k_scan_timeout_work(struct work_struct *work)
+{
+	struct ath10k *ar = container_of(work, struct ath10k,
+					 scan.timeout.work);
+
+	mutex_lock(&ar->conf_mutex);
+	ath10k_scan_abort(ar);
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_start_scan(struct ath10k *ar,
+			     const struct wmi_start_scan_arg *arg)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_wmi_start_scan(ar, arg);
+	if (ret)
+		return ret;
+
+	ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ);
+	if (ret == 0) {
+		ret = ath10k_scan_stop(ar);
+		if (ret)
+			ath10k_warn(ar, "failed to stop scan: %d\n", ret);
+
+		return -ETIMEDOUT;
+	}
+
+	/* If we failed to start the scan, return error code at
+	 * this point.  This is probably due to some issue in the
+	 * firmware, but no need to wedge the driver due to that...
+	 */
+	spin_lock_bh(&ar->data_lock);
+	if (ar->scan.state == ATH10K_SCAN_IDLE) {
+		spin_unlock_bh(&ar->data_lock);
+		return -EINVAL;
+	}
+	spin_unlock_bh(&ar->data_lock);
+
+	/* Add a 200ms margin to account for event/command processing */
+	ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout,
+				     msecs_to_jiffies(arg->max_scan_time+200));
+	return 0;
+}
+
+/**********************/
+/* mac80211 callbacks */
+/**********************/
+
+static void ath10k_tx(struct ieee80211_hw *hw,
+		      struct ieee80211_tx_control *control,
+		      struct sk_buff *skb)
+{
+	struct ath10k *ar = hw->priv;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_vif *vif = info->control.vif;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+
+	/* We should disable CCK RATE due to P2P */
+	if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
+
+	ATH10K_SKB_CB(skb)->htt.is_offchan = false;
+	ATH10K_SKB_CB(skb)->htt.tid = ath10k_tx_h_get_tid(hdr);
+	ATH10K_SKB_CB(skb)->vdev_id = ath10k_tx_h_get_vdev_id(ar, vif);
+
+	/* it makes no sense to process injected frames like that */
+	if (vif && vif->type != NL80211_IFTYPE_MONITOR) {
+		ath10k_tx_h_nwifi(hw, skb);
+		ath10k_tx_h_add_p2p_noa_ie(ar, vif, skb);
+		ath10k_tx_h_seq_no(vif, skb);
+	}
+
+	if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
+		spin_lock_bh(&ar->data_lock);
+		ATH10K_SKB_CB(skb)->htt.freq = ar->scan.roc_freq;
+		ATH10K_SKB_CB(skb)->vdev_id = ar->scan.vdev_id;
+		spin_unlock_bh(&ar->data_lock);
+
+		if (ath10k_mac_need_offchan_tx_work(ar)) {
+			ATH10K_SKB_CB(skb)->htt.freq = 0;
+			ATH10K_SKB_CB(skb)->htt.is_offchan = true;
+
+			ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %p\n",
+				   skb);
+
+			skb_queue_tail(&ar->offchan_tx_queue, skb);
+			ieee80211_queue_work(hw, &ar->offchan_tx_work);
+			return;
+		}
+	}
+
+	ath10k_tx_htt(ar, skb);
+}
+
+/* Must not be called with conf_mutex held as workers can use that also. */
+void ath10k_drain_tx(struct ath10k *ar)
+{
+	/* make sure rcu-protected mac80211 tx path itself is drained */
+	synchronize_net();
+
+	ath10k_offchan_tx_purge(ar);
+	ath10k_mgmt_over_wmi_tx_purge(ar);
+
+	cancel_work_sync(&ar->offchan_tx_work);
+	cancel_work_sync(&ar->wmi_mgmt_tx_work);
+}
+
+void ath10k_halt(struct ath10k *ar)
+{
+	struct ath10k_vif *arvif;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+	ar->filter_flags = 0;
+	ar->monitor = false;
+
+	if (ar->monitor_started)
+		ath10k_monitor_stop(ar);
+
+	ar->monitor_started = false;
+
+	ath10k_scan_finish(ar);
+	ath10k_peer_cleanup_all(ar);
+	ath10k_core_stop(ar);
+	ath10k_hif_power_down(ar);
+
+	spin_lock_bh(&ar->data_lock);
+	list_for_each_entry(arvif, &ar->arvifs, list)
+		ath10k_mac_vif_beacon_cleanup(arvif);
+	spin_unlock_bh(&ar->data_lock);
+}
+
+static int ath10k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
+{
+	struct ath10k *ar = hw->priv;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (ar->cfg_tx_chainmask) {
+		*tx_ant = ar->cfg_tx_chainmask;
+		*rx_ant = ar->cfg_rx_chainmask;
+	} else {
+		*tx_ant = ar->supp_tx_chainmask;
+		*rx_ant = ar->supp_rx_chainmask;
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+
+	return 0;
+}
+
+static void ath10k_check_chain_mask(struct ath10k *ar, u32 cm, const char *dbg)
+{
+	/* It is not clear that allowing gaps in chainmask
+	 * is helpful.  Probably it will not do what user
+	 * is hoping for, so warn in that case.
+	 */
+	if (cm == 15 || cm == 7 || cm == 3 || cm == 1 || cm == 0)
+		return;
+
+	ath10k_warn(ar, "mac %s antenna chainmask may be invalid: 0x%x.  Suggested values: 15, 7, 3, 1 or 0.\n",
+		    dbg, cm);
+}
+
+static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ath10k_check_chain_mask(ar, tx_ant, "tx");
+	ath10k_check_chain_mask(ar, rx_ant, "rx");
+
+	ar->cfg_tx_chainmask = tx_ant;
+	ar->cfg_rx_chainmask = rx_ant;
+
+	if ((ar->state != ATH10K_STATE_ON) &&
+	    (ar->state != ATH10K_STATE_RESTARTED))
+		return 0;
+
+	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_chain_mask,
+					tx_ant);
+	if (ret) {
+		ath10k_warn(ar, "failed to set tx-chainmask: %d, req 0x%x\n",
+			    ret, tx_ant);
+		return ret;
+	}
+
+	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->rx_chain_mask,
+					rx_ant);
+	if (ret) {
+		ath10k_warn(ar, "failed to set rx-chainmask: %d, req 0x%x\n",
+			    ret, rx_ant);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+	ret = __ath10k_set_antenna(ar, tx_ant, rx_ant);
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_start(struct ieee80211_hw *hw)
+{
+	struct ath10k *ar = hw->priv;
+	int ret = 0;
+
+	/*
+	 * This makes sense only when restarting hw. It is harmless to call
+	 * uncoditionally. This is necessary to make sure no HTT/WMI tx
+	 * commands will be submitted while restarting.
+	 */
+	ath10k_drain_tx(ar);
+
+	mutex_lock(&ar->conf_mutex);
+
+	switch (ar->state) {
+	case ATH10K_STATE_OFF:
+		ar->state = ATH10K_STATE_ON;
+		break;
+	case ATH10K_STATE_RESTARTING:
+		ath10k_halt(ar);
+		ar->state = ATH10K_STATE_RESTARTED;
+		break;
+	case ATH10K_STATE_ON:
+	case ATH10K_STATE_RESTARTED:
+	case ATH10K_STATE_WEDGED:
+		WARN_ON(1);
+		ret = -EINVAL;
+		goto err;
+	case ATH10K_STATE_UTF:
+		ret = -EBUSY;
+		goto err;
+	}
+
+	ret = ath10k_hif_power_up(ar);
+	if (ret) {
+		ath10k_err(ar, "Could not init hif: %d\n", ret);
+		goto err_off;
+	}
+
+	ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL);
+	if (ret) {
+		ath10k_err(ar, "Could not init core: %d\n", ret);
+		goto err_power_down;
+	}
+
+	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1);
+	if (ret) {
+		ath10k_warn(ar, "failed to enable PMF QOS: %d\n", ret);
+		goto err_core_stop;
+	}
+
+	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 1);
+	if (ret) {
+		ath10k_warn(ar, "failed to enable dynamic BW: %d\n", ret);
+		goto err_core_stop;
+	}
+
+	if (ar->cfg_tx_chainmask)
+		__ath10k_set_antenna(ar, ar->cfg_tx_chainmask,
+				     ar->cfg_rx_chainmask);
+
+	/*
+	 * By default FW set ARP frames ac to voice (6). In that case ARP
+	 * exchange is not working properly for UAPSD enabled AP. ARP requests
+	 * which arrives with access category 0 are processed by network stack
+	 * and send back with access category 0, but FW changes access category
+	 * to 6. Set ARP frames access category to best effort (0) solves
+	 * this problem.
+	 */
+
+	ret = ath10k_wmi_pdev_set_param(ar,
+					ar->wmi.pdev_param->arp_ac_override, 0);
+	if (ret) {
+		ath10k_warn(ar, "failed to set arp ac override parameter: %d\n",
+			    ret);
+		goto err_core_stop;
+	}
+
+	ar->num_started_vdevs = 0;
+	ath10k_regd_update(ar);
+
+	ath10k_spectral_start(ar);
+
+	mutex_unlock(&ar->conf_mutex);
+	return 0;
+
+err_core_stop:
+	ath10k_core_stop(ar);
+
+err_power_down:
+	ath10k_hif_power_down(ar);
+
+err_off:
+	ar->state = ATH10K_STATE_OFF;
+
+err:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static void ath10k_stop(struct ieee80211_hw *hw)
+{
+	struct ath10k *ar = hw->priv;
+
+	ath10k_drain_tx(ar);
+
+	mutex_lock(&ar->conf_mutex);
+	if (ar->state != ATH10K_STATE_OFF) {
+		ath10k_halt(ar);
+		ar->state = ATH10K_STATE_OFF;
+	}
+	mutex_unlock(&ar->conf_mutex);
+
+	cancel_delayed_work_sync(&ar->scan.timeout);
+	cancel_work_sync(&ar->restart_work);
+}
+
+static int ath10k_config_ps(struct ath10k *ar)
+{
+	struct ath10k_vif *arvif;
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	list_for_each_entry(arvif, &ar->arvifs, list) {
+		ret = ath10k_mac_vif_setup_ps(arvif);
+		if (ret) {
+			ath10k_warn(ar, "failed to setup powersave: %d\n", ret);
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static const char *chandef_get_width(enum nl80211_chan_width width)
+{
+	switch (width) {
+	case NL80211_CHAN_WIDTH_20_NOHT:
+		return "20 (noht)";
+	case NL80211_CHAN_WIDTH_20:
+		return "20";
+	case NL80211_CHAN_WIDTH_40:
+		return "40";
+	case NL80211_CHAN_WIDTH_80:
+		return "80";
+	case NL80211_CHAN_WIDTH_80P80:
+		return "80+80";
+	case NL80211_CHAN_WIDTH_160:
+		return "160";
+	case NL80211_CHAN_WIDTH_5:
+		return "5";
+	case NL80211_CHAN_WIDTH_10:
+		return "10";
+	}
+	return "?";
+}
+
+static void ath10k_config_chan(struct ath10k *ar)
+{
+	struct ath10k_vif *arvif;
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac config channel to %dMHz (cf1 %dMHz cf2 %dMHz width %s)\n",
+		   ar->chandef.chan->center_freq,
+		   ar->chandef.center_freq1,
+		   ar->chandef.center_freq2,
+		   chandef_get_width(ar->chandef.width));
+
+	/* First stop monitor interface. Some FW versions crash if there's a
+	 * lone monitor interface. */
+	if (ar->monitor_started)
+		ath10k_monitor_stop(ar);
+
+	list_for_each_entry(arvif, &ar->arvifs, list) {
+		if (!arvif->is_started)
+			continue;
+
+		if (!arvif->is_up)
+			continue;
+
+		if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+			continue;
+
+		ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+		if (ret) {
+			ath10k_warn(ar, "failed to down vdev %d: %d\n",
+				    arvif->vdev_id, ret);
+			continue;
+		}
+	}
+
+	/* all vdevs are downed now - attempt to restart and re-up them */
+
+	list_for_each_entry(arvif, &ar->arvifs, list) {
+		if (!arvif->is_started)
+			continue;
+
+		if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+			continue;
+
+		ret = ath10k_vdev_restart(arvif);
+		if (ret) {
+			ath10k_warn(ar, "failed to restart vdev %d: %d\n",
+				    arvif->vdev_id, ret);
+			continue;
+		}
+
+		if (!arvif->is_up)
+			continue;
+
+		ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
+					 arvif->bssid);
+		if (ret) {
+			ath10k_warn(ar, "failed to bring vdev up %d: %d\n",
+				    arvif->vdev_id, ret);
+			continue;
+		}
+	}
+
+	ath10k_monitor_recalc(ar);
+}
+
+static int ath10k_mac_txpower_setup(struct ath10k *ar, int txpower)
+{
+	int ret;
+	u32 param;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac txpower %d\n", txpower);
+
+	param = ar->wmi.pdev_param->txpower_limit2g;
+	ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2);
+	if (ret) {
+		ath10k_warn(ar, "failed to set 2g txpower %d: %d\n",
+			    txpower, ret);
+		return ret;
+	}
+
+	param = ar->wmi.pdev_param->txpower_limit5g;
+	ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2);
+	if (ret) {
+		ath10k_warn(ar, "failed to set 5g txpower %d: %d\n",
+			    txpower, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_mac_txpower_recalc(struct ath10k *ar)
+{
+	struct ath10k_vif *arvif;
+	int ret, txpower = -1;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	list_for_each_entry(arvif, &ar->arvifs, list) {
+		WARN_ON(arvif->txpower < 0);
+
+		if (txpower == -1)
+			txpower = arvif->txpower;
+		else
+			txpower = min(txpower, arvif->txpower);
+	}
+
+	if (WARN_ON(txpower == -1))
+		return -EINVAL;
+
+	ret = ath10k_mac_txpower_setup(ar, txpower);
+	if (ret) {
+		ath10k_warn(ar, "failed to setup tx power %d: %d\n",
+			    txpower, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct ath10k *ar = hw->priv;
+	struct ieee80211_conf *conf = &hw->conf;
+	int ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC,
+			   "mac config channel %dMHz flags 0x%x radar %d\n",
+			   conf->chandef.chan->center_freq,
+			   conf->chandef.chan->flags,
+			   conf->radar_enabled);
+
+		spin_lock_bh(&ar->data_lock);
+		ar->rx_channel = conf->chandef.chan;
+		spin_unlock_bh(&ar->data_lock);
+
+		ar->radar_enabled = conf->radar_enabled;
+		ath10k_recalc_radar_detection(ar);
+
+		if (!cfg80211_chandef_identical(&ar->chandef, &conf->chandef)) {
+			ar->chandef = conf->chandef;
+			ath10k_config_chan(ar);
+		}
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_PS)
+		ath10k_config_ps(ar);
+
+	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
+		ar->monitor = conf->flags & IEEE80211_CONF_MONITOR;
+		ret = ath10k_monitor_recalc(ar);
+		if (ret)
+			ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static u32 get_nss_from_chainmask(u16 chain_mask)
+{
+	if ((chain_mask & 0x15) == 0x15)
+		return 4;
+	else if ((chain_mask & 0x7) == 0x7)
+		return 3;
+	else if ((chain_mask & 0x3) == 0x3)
+		return 2;
+	return 1;
+}
+
+/*
+ * TODO:
+ * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE,
+ * because we will send mgmt frames without CCK. This requirement
+ * for P2P_FIND/GO_NEG should be handled by checking CCK flag
+ * in the TX packet.
+ */
+static int ath10k_add_interface(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	enum wmi_sta_powersave_param param;
+	int ret = 0;
+	u32 value;
+	int bit;
+	u32 vdev_param;
+
+	vif->driver_flags |= IEEE80211_VIF_SUPPORTS_UAPSD;
+
+	mutex_lock(&ar->conf_mutex);
+
+	memset(arvif, 0, sizeof(*arvif));
+
+	arvif->ar = ar;
+	arvif->vif = vif;
+
+	INIT_LIST_HEAD(&arvif->list);
+
+	if (ar->free_vdev_map == 0) {
+		ath10k_warn(ar, "Free vdev map is empty, no more interfaces allowed.\n");
+		ret = -EBUSY;
+		goto err;
+	}
+	bit = __ffs64(ar->free_vdev_map);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac create vdev %i map %llx\n",
+		   bit, ar->free_vdev_map);
+
+	arvif->vdev_id = bit;
+	arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE;
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_P2P_DEVICE:
+		arvif->vdev_type = WMI_VDEV_TYPE_STA;
+		arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
+		break;
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NL80211_IFTYPE_STATION:
+		arvif->vdev_type = WMI_VDEV_TYPE_STA;
+		if (vif->p2p)
+			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		arvif->vdev_type = WMI_VDEV_TYPE_IBSS;
+		break;
+	case NL80211_IFTYPE_AP:
+		arvif->vdev_type = WMI_VDEV_TYPE_AP;
+
+		if (vif->p2p)
+			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO;
+		break;
+	case NL80211_IFTYPE_MONITOR:
+		arvif->vdev_type = WMI_VDEV_TYPE_MONITOR;
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	/* Some firmware revisions don't wait for beacon tx completion before
+	 * sending another SWBA event. This could lead to hardware using old
+	 * (freed) beacon data in some cases, e.g. tx credit starvation
+	 * combined with missed TBTT. This is very very rare.
+	 *
+	 * On non-IOMMU-enabled hosts this could be a possible security issue
+	 * because hw could beacon some random data on the air.  On
+	 * IOMMU-enabled hosts DMAR faults would occur in most cases and target
+	 * device would crash.
+	 *
+	 * Since there are no beacon tx completions (implicit nor explicit)
+	 * propagated to host the only workaround for this is to allocate a
+	 * DMA-coherent buffer for a lifetime of a vif and use it for all
+	 * beacon tx commands. Worst case for this approach is some beacons may
+	 * become corrupted, e.g. have garbled IEs or out-of-date TIM bitmap.
+	 */
+	if (vif->type == NL80211_IFTYPE_ADHOC ||
+	    vif->type == NL80211_IFTYPE_AP) {
+		arvif->beacon_buf = dma_zalloc_coherent(ar->dev,
+							IEEE80211_MAX_FRAME_LEN,
+							&arvif->beacon_paddr,
+							GFP_ATOMIC);
+		if (!arvif->beacon_buf) {
+			ret = -ENOMEM;
+			ath10k_warn(ar, "failed to allocate beacon buffer: %d\n",
+				    ret);
+			goto err;
+		}
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d bcnmode %s\n",
+		   arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype,
+		   arvif->beacon_buf ? "single-buf" : "per-skb");
+
+	ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
+				     arvif->vdev_subtype, vif->addr);
+	if (ret) {
+		ath10k_warn(ar, "failed to create WMI vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		goto err;
+	}
+
+	ar->free_vdev_map &= ~(1LL << arvif->vdev_id);
+	list_add(&arvif->list, &ar->arvifs);
+
+	/* It makes no sense to have firmware do keepalives. mac80211 already
+	 * takes care of this with idle connection polling.
+	 */
+	ret = ath10k_mac_vif_disable_keepalive(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to disable keepalive on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		goto err_vdev_delete;
+	}
+
+	arvif->def_wep_key_idx = -1;
+
+	vdev_param = ar->wmi.vdev_param->tx_encap_type;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+					ATH10K_HW_TXRX_NATIVE_WIFI);
+	/* 10.X firmware does not support this VDEV parameter. Do not warn */
+	if (ret && ret != -EOPNOTSUPP) {
+		ath10k_warn(ar, "failed to set vdev %i TX encapsulation: %d\n",
+			    arvif->vdev_id, ret);
+		goto err_vdev_delete;
+	}
+
+	if (ar->cfg_tx_chainmask) {
+		u16 nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
+
+		vdev_param = ar->wmi.vdev_param->nss;
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+						nss);
+		if (ret) {
+			ath10k_warn(ar, "failed to set vdev %i chainmask 0x%x, nss %i: %d\n",
+				    arvif->vdev_id, ar->cfg_tx_chainmask, nss,
+				    ret);
+			goto err_vdev_delete;
+		}
+	}
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr);
+		if (ret) {
+			ath10k_warn(ar, "failed to create vdev %i peer for AP: %d\n",
+				    arvif->vdev_id, ret);
+			goto err_vdev_delete;
+		}
+
+		ret = ath10k_mac_set_kickout(arvif);
+		if (ret) {
+			ath10k_warn(ar, "failed to set vdev %i kickout parameters: %d\n",
+				    arvif->vdev_id, ret);
+			goto err_peer_delete;
+		}
+	}
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_STA) {
+		param = WMI_STA_PS_PARAM_RX_WAKE_POLICY;
+		value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
+		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+						  param, value);
+		if (ret) {
+			ath10k_warn(ar, "failed to set vdev %i RX wake policy: %d\n",
+				    arvif->vdev_id, ret);
+			goto err_peer_delete;
+		}
+
+		ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
+		if (ret) {
+			ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+			goto err_peer_delete;
+		}
+
+		ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
+		if (ret) {
+			ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+			goto err_peer_delete;
+		}
+	}
+
+	ret = ath10k_mac_set_rts(arvif, ar->hw->wiphy->rts_threshold);
+	if (ret) {
+		ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n",
+			    arvif->vdev_id, ret);
+		goto err_peer_delete;
+	}
+
+	ret = ath10k_mac_set_frag(arvif, ar->hw->wiphy->frag_threshold);
+	if (ret) {
+		ath10k_warn(ar, "failed to set frag threshold for vdev %d: %d\n",
+			    arvif->vdev_id, ret);
+		goto err_peer_delete;
+	}
+
+	arvif->txpower = vif->bss_conf.txpower;
+	ret = ath10k_mac_txpower_recalc(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
+		goto err_peer_delete;
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+	return 0;
+
+err_peer_delete:
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP)
+		ath10k_wmi_peer_delete(ar, arvif->vdev_id, vif->addr);
+
+err_vdev_delete:
+	ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
+	ar->free_vdev_map |= 1LL << arvif->vdev_id;
+	list_del(&arvif->list);
+
+err:
+	if (arvif->beacon_buf) {
+		dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
+				  arvif->beacon_buf, arvif->beacon_paddr);
+		arvif->beacon_buf = NULL;
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+
+	return ret;
+}
+
+static void ath10k_remove_interface(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	ath10k_mac_vif_beacon_cleanup(arvif);
+	spin_unlock_bh(&ar->data_lock);
+
+	ret = ath10k_spectral_vif_stop(arvif);
+	if (ret)
+		ath10k_warn(ar, "failed to stop spectral for vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+
+	ar->free_vdev_map |= 1LL << arvif->vdev_id;
+	list_del(&arvif->list);
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		ret = ath10k_wmi_peer_delete(arvif->ar, arvif->vdev_id,
+					     vif->addr);
+		if (ret)
+			ath10k_warn(ar, "failed to submit AP self-peer removal on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+
+		kfree(arvif->u.ap.noa_data);
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i delete (remove interface)\n",
+		   arvif->vdev_id);
+
+	ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
+	if (ret)
+		ath10k_warn(ar, "failed to delete WMI vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+
+	/* Some firmware revisions don't notify host about self-peer removal
+	 * until after associated vdev is deleted.
+	 */
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		ret = ath10k_wait_for_peer_deleted(ar, arvif->vdev_id,
+						   vif->addr);
+		if (ret)
+			ath10k_warn(ar, "failed to remove AP self-peer on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+
+		spin_lock_bh(&ar->data_lock);
+		ar->num_peers--;
+		spin_unlock_bh(&ar->data_lock);
+	}
+
+	ath10k_peer_cleanup(ar, arvif->vdev_id);
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+/*
+ * FIXME: Has to be verified.
+ */
+#define SUPPORTED_FILTERS			\
+	(FIF_PROMISC_IN_BSS |			\
+	FIF_ALLMULTI |				\
+	FIF_CONTROL |				\
+	FIF_PSPOLL |				\
+	FIF_OTHER_BSS |				\
+	FIF_BCN_PRBRESP_PROMISC |		\
+	FIF_PROBE_REQ |				\
+	FIF_FCSFAIL)
+
+static void ath10k_configure_filter(struct ieee80211_hw *hw,
+				    unsigned int changed_flags,
+				    unsigned int *total_flags,
+				    u64 multicast)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	changed_flags &= SUPPORTED_FILTERS;
+	*total_flags &= SUPPORTED_FILTERS;
+	ar->filter_flags = *total_flags;
+
+	ret = ath10k_monitor_recalc(ar);
+	if (ret)
+		ath10k_warn(ar, "failed to recalc montior: %d\n", ret);
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_bss_conf *info,
+				    u32 changed)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret = 0;
+	u32 vdev_param, pdev_param, slottime, preamble;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (changed & BSS_CHANGED_IBSS)
+		ath10k_control_ibss(arvif, info, vif->addr);
+
+	if (changed & BSS_CHANGED_BEACON_INT) {
+		arvif->beacon_interval = info->beacon_int;
+		vdev_param = ar->wmi.vdev_param->beacon_interval;
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+						arvif->beacon_interval);
+		ath10k_dbg(ar, ATH10K_DBG_MAC,
+			   "mac vdev %d beacon_interval %d\n",
+			   arvif->vdev_id, arvif->beacon_interval);
+
+		if (ret)
+			ath10k_warn(ar, "failed to set beacon interval for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
+	}
+
+	if (changed & BSS_CHANGED_BEACON) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC,
+			   "vdev %d set beacon tx mode to staggered\n",
+			   arvif->vdev_id);
+
+		pdev_param = ar->wmi.pdev_param->beacon_tx_mode;
+		ret = ath10k_wmi_pdev_set_param(ar, pdev_param,
+						WMI_BEACON_STAGGERED_MODE);
+		if (ret)
+			ath10k_warn(ar, "failed to set beacon mode for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
+
+		ret = ath10k_mac_setup_bcn_tmpl(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to update beacon template: %d\n",
+				    ret);
+	}
+
+	if (changed & BSS_CHANGED_AP_PROBE_RESP) {
+		ret = ath10k_mac_setup_prb_tmpl(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to setup probe resp template on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+	}
+
+	if (changed & (BSS_CHANGED_BEACON_INFO | BSS_CHANGED_BEACON)) {
+		arvif->dtim_period = info->dtim_period;
+
+		ath10k_dbg(ar, ATH10K_DBG_MAC,
+			   "mac vdev %d dtim_period %d\n",
+			   arvif->vdev_id, arvif->dtim_period);
+
+		vdev_param = ar->wmi.vdev_param->dtim_period;
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+						arvif->dtim_period);
+		if (ret)
+			ath10k_warn(ar, "failed to set dtim period for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
+	}
+
+	if (changed & BSS_CHANGED_SSID &&
+	    vif->type == NL80211_IFTYPE_AP) {
+		arvif->u.ap.ssid_len = info->ssid_len;
+		if (info->ssid_len)
+			memcpy(arvif->u.ap.ssid, info->ssid, info->ssid_len);
+		arvif->u.ap.hidden_ssid = info->hidden_ssid;
+	}
+
+	if (changed & BSS_CHANGED_BSSID && !is_zero_ether_addr(info->bssid))
+		ether_addr_copy(arvif->bssid, info->bssid);
+
+	if (changed & BSS_CHANGED_BEACON_ENABLED)
+		ath10k_control_beaconing(arvif, info);
+
+	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+		arvif->use_cts_prot = info->use_cts_prot;
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n",
+			   arvif->vdev_id, info->use_cts_prot);
+
+		ret = ath10k_recalc_rtscts_prot(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
+				    arvif->vdev_id, ret);
+	}
+
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		if (info->use_short_slot)
+			slottime = WMI_VDEV_SLOT_TIME_SHORT; /* 9us */
+
+		else
+			slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */
+
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n",
+			   arvif->vdev_id, slottime);
+
+		vdev_param = ar->wmi.vdev_param->slot_time;
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+						slottime);
+		if (ret)
+			ath10k_warn(ar, "failed to set erp slot for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
+	}
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		if (info->use_short_preamble)
+			preamble = WMI_VDEV_PREAMBLE_SHORT;
+		else
+			preamble = WMI_VDEV_PREAMBLE_LONG;
+
+		ath10k_dbg(ar, ATH10K_DBG_MAC,
+			   "mac vdev %d preamble %dn",
+			   arvif->vdev_id, preamble);
+
+		vdev_param = ar->wmi.vdev_param->preamble;
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+						preamble);
+		if (ret)
+			ath10k_warn(ar, "failed to set preamble for vdev %d: %i\n",
+				    arvif->vdev_id, ret);
+	}
+
+	if (changed & BSS_CHANGED_ASSOC) {
+		if (info->assoc) {
+			/* Workaround: Make sure monitor vdev is not running
+			 * when associating to prevent some firmware revisions
+			 * (e.g. 10.1 and 10.2) from crashing.
+			 */
+			if (ar->monitor_started)
+				ath10k_monitor_stop(ar);
+			ath10k_bss_assoc(hw, vif, info);
+			ath10k_monitor_recalc(ar);
+		} else {
+			ath10k_bss_disassoc(hw, vif);
+		}
+	}
+
+	if (changed & BSS_CHANGED_TXPOWER) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev_id %i txpower %d\n",
+			   arvif->vdev_id, info->txpower);
+
+		arvif->txpower = info->txpower;
+		ret = ath10k_mac_txpower_recalc(ar);
+		if (ret)
+			ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
+	}
+
+	if (changed & BSS_CHANGED_PS) {
+		arvif->ps = vif->bss_conf.ps;
+
+		ret = ath10k_config_ps(ar);
+		if (ret)
+			ath10k_warn(ar, "failed to setup ps on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_hw_scan(struct ieee80211_hw *hw,
+			  struct ieee80211_vif *vif,
+			  struct ieee80211_scan_request *hw_req)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct cfg80211_scan_request *req = &hw_req->req;
+	struct wmi_start_scan_arg arg;
+	int ret = 0;
+	int i;
+
+	mutex_lock(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	switch (ar->scan.state) {
+	case ATH10K_SCAN_IDLE:
+		reinit_completion(&ar->scan.started);
+		reinit_completion(&ar->scan.completed);
+		ar->scan.state = ATH10K_SCAN_STARTING;
+		ar->scan.is_roc = false;
+		ar->scan.vdev_id = arvif->vdev_id;
+		ret = 0;
+		break;
+	case ATH10K_SCAN_STARTING:
+	case ATH10K_SCAN_RUNNING:
+	case ATH10K_SCAN_ABORTING:
+		ret = -EBUSY;
+		break;
+	}
+	spin_unlock_bh(&ar->data_lock);
+
+	if (ret)
+		goto exit;
+
+	memset(&arg, 0, sizeof(arg));
+	ath10k_wmi_start_scan_init(ar, &arg);
+	arg.vdev_id = arvif->vdev_id;
+	arg.scan_id = ATH10K_SCAN_ID;
+
+	if (!req->no_cck)
+		arg.scan_ctrl_flags |= WMI_SCAN_ADD_CCK_RATES;
+
+	if (req->ie_len) {
+		arg.ie_len = req->ie_len;
+		memcpy(arg.ie, req->ie, arg.ie_len);
+	}
+
+	if (req->n_ssids) {
+		arg.n_ssids = req->n_ssids;
+		for (i = 0; i < arg.n_ssids; i++) {
+			arg.ssids[i].len  = req->ssids[i].ssid_len;
+			arg.ssids[i].ssid = req->ssids[i].ssid;
+		}
+	} else {
+		arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
+	}
+
+	if (req->n_channels) {
+		arg.n_channels = req->n_channels;
+		for (i = 0; i < arg.n_channels; i++)
+			arg.channels[i] = req->channels[i]->center_freq;
+	}
+
+	ret = ath10k_start_scan(ar, &arg);
+	if (ret) {
+		ath10k_warn(ar, "failed to start hw scan: %d\n", ret);
+		spin_lock_bh(&ar->data_lock);
+		ar->scan.state = ATH10K_SCAN_IDLE;
+		spin_unlock_bh(&ar->data_lock);
+	}
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+
+	mutex_lock(&ar->conf_mutex);
+	ath10k_scan_abort(ar);
+	mutex_unlock(&ar->conf_mutex);
+
+	cancel_delayed_work_sync(&ar->scan.timeout);
+}
+
+static void ath10k_set_key_h_def_keyidx(struct ath10k *ar,
+					struct ath10k_vif *arvif,
+					enum set_key_cmd cmd,
+					struct ieee80211_key_conf *key)
+{
+	u32 vdev_param = arvif->ar->wmi.vdev_param->def_keyid;
+	int ret;
+
+	/* 10.1 firmware branch requires default key index to be set to group
+	 * key index after installing it. Otherwise FW/HW Txes corrupted
+	 * frames with multi-vif APs. This is not required for main firmware
+	 * branch (e.g. 636).
+	 *
+	 * FIXME: This has been tested only in AP. It remains unknown if this
+	 * is required for multi-vif STA interfaces on 10.1 */
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
+		return;
+
+	if (key->cipher == WLAN_CIPHER_SUITE_WEP40)
+		return;
+
+	if (key->cipher == WLAN_CIPHER_SUITE_WEP104)
+		return;
+
+	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+		return;
+
+	if (cmd != SET_KEY)
+		return;
+
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+					key->keyidx);
+	if (ret)
+		ath10k_warn(ar, "failed to set vdev %i group key as default key: %d\n",
+			    arvif->vdev_id, ret);
+}
+
+static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			  struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+			  struct ieee80211_key_conf *key)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ath10k_peer *peer;
+	const u8 *peer_addr;
+	bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+		      key->cipher == WLAN_CIPHER_SUITE_WEP104;
+	bool def_idx = false;
+	int ret = 0;
+
+	if (key->keyidx > WMI_MAX_KEY_INDEX)
+		return -ENOSPC;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (sta)
+		peer_addr = sta->addr;
+	else if (arvif->vdev_type == WMI_VDEV_TYPE_STA)
+		peer_addr = vif->bss_conf.bssid;
+	else
+		peer_addr = vif->addr;
+
+	key->hw_key_idx = key->keyidx;
+
+	/* the peer should not disappear in mid-way (unless FW goes awry) since
+	 * we already hold conf_mutex. we just make sure its there now. */
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!peer) {
+		if (cmd == SET_KEY) {
+			ath10k_warn(ar, "failed to install key for non-existent peer %pM\n",
+				    peer_addr);
+			ret = -EOPNOTSUPP;
+			goto exit;
+		} else {
+			/* if the peer doesn't exist there is no key to disable
+			 * anymore */
+			goto exit;
+		}
+	}
+
+	if (is_wep) {
+		if (cmd == SET_KEY)
+			arvif->wep_keys[key->keyidx] = key;
+		else
+			arvif->wep_keys[key->keyidx] = NULL;
+
+		if (cmd == DISABLE_KEY)
+			ath10k_clear_vdev_key(arvif, key);
+	}
+
+	/* set TX_USAGE flag for all the keys incase of dot1x-WEP. For
+	 * static WEP, do not set this flag for the keys whose key id
+	 * is  greater than default key id.
+	 */
+	if (arvif->def_wep_key_idx == -1)
+		def_idx = true;
+
+	ret = ath10k_install_key(arvif, key, cmd, peer_addr, def_idx);
+	if (ret) {
+		ath10k_warn(ar, "failed to install key for vdev %i peer %pM: %d\n",
+			    arvif->vdev_id, peer_addr, ret);
+		goto exit;
+	}
+
+	ath10k_set_key_h_def_keyidx(ar, arvif, cmd, key);
+
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
+	if (peer && cmd == SET_KEY)
+		peer->keys[key->keyidx] = key;
+	else if (peer && cmd == DISABLE_KEY)
+		peer->keys[key->keyidx] = NULL;
+	else if (peer == NULL)
+		/* impossible unless FW goes crazy */
+		ath10k_warn(ar, "Peer %pM disappeared!\n", peer_addr);
+	spin_unlock_bh(&ar->data_lock);
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static void ath10k_set_default_unicast_key(struct ieee80211_hw *hw,
+					   struct ieee80211_vif *vif,
+					   int keyidx)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret;
+
+	mutex_lock(&arvif->ar->conf_mutex);
+
+	if (arvif->ar->state != ATH10K_STATE_ON)
+		goto unlock;
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d set keyidx %d\n",
+		   arvif->vdev_id, keyidx);
+
+	ret = ath10k_wmi_vdev_set_param(arvif->ar,
+					arvif->vdev_id,
+					arvif->ar->wmi.vdev_param->def_keyid,
+					keyidx);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to update wep key index for vdev %d: %d\n",
+			    arvif->vdev_id,
+			    ret);
+		goto unlock;
+	}
+
+	arvif->def_wep_key_idx = keyidx;
+unlock:
+	mutex_unlock(&arvif->ar->conf_mutex);
+}
+
+static void ath10k_sta_rc_update_wk(struct work_struct *wk)
+{
+	struct ath10k *ar;
+	struct ath10k_vif *arvif;
+	struct ath10k_sta *arsta;
+	struct ieee80211_sta *sta;
+	u32 changed, bw, nss, smps;
+	int err;
+
+	arsta = container_of(wk, struct ath10k_sta, update_wk);
+	sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv);
+	arvif = arsta->arvif;
+	ar = arvif->ar;
+
+	spin_lock_bh(&ar->data_lock);
+
+	changed = arsta->changed;
+	arsta->changed = 0;
+
+	bw = arsta->bw;
+	nss = arsta->nss;
+	smps = arsta->smps;
+
+	spin_unlock_bh(&ar->data_lock);
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (changed & IEEE80211_RC_BW_CHANGED) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d\n",
+			   sta->addr, bw);
+
+		err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
+						WMI_PEER_CHAN_WIDTH, bw);
+		if (err)
+			ath10k_warn(ar, "failed to update STA %pM peer bw %d: %d\n",
+				    sta->addr, bw, err);
+	}
+
+	if (changed & IEEE80211_RC_NSS_CHANGED) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM nss %d\n",
+			   sta->addr, nss);
+
+		err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
+						WMI_PEER_NSS, nss);
+		if (err)
+			ath10k_warn(ar, "failed to update STA %pM nss %d: %d\n",
+				    sta->addr, nss, err);
+	}
+
+	if (changed & IEEE80211_RC_SMPS_CHANGED) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM smps %d\n",
+			   sta->addr, smps);
+
+		err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
+						WMI_PEER_SMPS_STATE, smps);
+		if (err)
+			ath10k_warn(ar, "failed to update STA %pM smps %d: %d\n",
+				    sta->addr, smps, err);
+	}
+
+	if (changed & IEEE80211_RC_SUPP_RATES_CHANGED ||
+	    changed & IEEE80211_RC_NSS_CHANGED) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates/nss\n",
+			   sta->addr);
+
+		err = ath10k_station_assoc(ar, arvif->vif, sta, true);
+		if (err)
+			ath10k_warn(ar, "failed to reassociate station: %pM\n",
+				    sta->addr);
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_mac_inc_num_stations(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+	    arvif->vdev_type != WMI_VDEV_TYPE_IBSS)
+		return 0;
+
+	if (ar->num_stations >= ar->max_num_stations)
+		return -ENOBUFS;
+
+	ar->num_stations++;
+
+	return 0;
+}
+
+static void ath10k_mac_dec_num_stations(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+	    arvif->vdev_type != WMI_VDEV_TYPE_IBSS)
+		return;
+
+	ar->num_stations--;
+}
+
+static int ath10k_sta_state(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta,
+			    enum ieee80211_sta_state old_state,
+			    enum ieee80211_sta_state new_state)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	int ret = 0;
+
+	if (old_state == IEEE80211_STA_NOTEXIST &&
+	    new_state == IEEE80211_STA_NONE) {
+		memset(arsta, 0, sizeof(*arsta));
+		arsta->arvif = arvif;
+		INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk);
+	}
+
+	/* cancel must be done outside the mutex to avoid deadlock */
+	if ((old_state == IEEE80211_STA_NONE &&
+	     new_state == IEEE80211_STA_NOTEXIST))
+		cancel_work_sync(&arsta->update_wk);
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (old_state == IEEE80211_STA_NOTEXIST &&
+	    new_state == IEEE80211_STA_NONE) {
+		/*
+		 * New station addition.
+		 */
+		ath10k_dbg(ar, ATH10K_DBG_MAC,
+			   "mac vdev %d peer create %pM (new sta) sta %d / %d peer %d / %d\n",
+			   arvif->vdev_id, sta->addr,
+			   ar->num_stations + 1, ar->max_num_stations,
+			   ar->num_peers + 1, ar->max_num_peers);
+
+		ret = ath10k_mac_inc_num_stations(arvif);
+		if (ret) {
+			ath10k_warn(ar, "refusing to associate station: too many connected already (%d)\n",
+				    ar->max_num_stations);
+			goto exit;
+		}
+
+		ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
+		if (ret) {
+			ath10k_warn(ar, "failed to add peer %pM for vdev %d when adding a new sta: %i\n",
+				    sta->addr, arvif->vdev_id, ret);
+			ath10k_mac_dec_num_stations(arvif);
+			goto exit;
+		}
+
+		if (vif->type == NL80211_IFTYPE_STATION) {
+			WARN_ON(arvif->is_started);
+
+			ret = ath10k_vdev_start(arvif);
+			if (ret) {
+				ath10k_warn(ar, "failed to start vdev %i: %d\n",
+					    arvif->vdev_id, ret);
+				WARN_ON(ath10k_peer_delete(ar, arvif->vdev_id,
+							   sta->addr));
+				ath10k_mac_dec_num_stations(arvif);
+				goto exit;
+			}
+
+			arvif->is_started = true;
+		}
+	} else if ((old_state == IEEE80211_STA_NONE &&
+		    new_state == IEEE80211_STA_NOTEXIST)) {
+		/*
+		 * Existing station deletion.
+		 */
+		ath10k_dbg(ar, ATH10K_DBG_MAC,
+			   "mac vdev %d peer delete %pM (sta gone)\n",
+			   arvif->vdev_id, sta->addr);
+
+		if (vif->type == NL80211_IFTYPE_STATION) {
+			WARN_ON(!arvif->is_started);
+
+			ret = ath10k_vdev_stop(arvif);
+			if (ret)
+				ath10k_warn(ar, "failed to stop vdev %i: %d\n",
+					    arvif->vdev_id, ret);
+
+			arvif->is_started = false;
+		}
+
+		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
+		if (ret)
+			ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
+				    sta->addr, arvif->vdev_id, ret);
+
+		ath10k_mac_dec_num_stations(arvif);
+	} else if (old_state == IEEE80211_STA_AUTH &&
+		   new_state == IEEE80211_STA_ASSOC &&
+		   (vif->type == NL80211_IFTYPE_AP ||
+		    vif->type == NL80211_IFTYPE_ADHOC)) {
+		/*
+		 * New association.
+		 */
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM associated\n",
+			   sta->addr);
+
+		ret = ath10k_station_assoc(ar, vif, sta, false);
+		if (ret)
+			ath10k_warn(ar, "failed to associate station %pM for vdev %i: %i\n",
+				    sta->addr, arvif->vdev_id, ret);
+	} else if (old_state == IEEE80211_STA_ASSOC &&
+		   new_state == IEEE80211_STA_AUTH &&
+		   (vif->type == NL80211_IFTYPE_AP ||
+		    vif->type == NL80211_IFTYPE_ADHOC)) {
+		/*
+		 * Disassociation.
+		 */
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM disassociated\n",
+			   sta->addr);
+
+		ret = ath10k_station_disassoc(ar, vif, sta);
+		if (ret)
+			ath10k_warn(ar, "failed to disassociate station: %pM vdev %i: %i\n",
+				    sta->addr, arvif->vdev_id, ret);
+	}
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
+				u16 ac, bool enable)
+{
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct wmi_sta_uapsd_auto_trig_arg arg = {};
+	u32 prio = 0, acc = 0;
+	u32 value = 0;
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
+		return 0;
+
+	switch (ac) {
+	case IEEE80211_AC_VO:
+		value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC3_TRIGGER_EN;
+		prio = 7;
+		acc = 3;
+		break;
+	case IEEE80211_AC_VI:
+		value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC2_TRIGGER_EN;
+		prio = 5;
+		acc = 2;
+		break;
+	case IEEE80211_AC_BE:
+		value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC1_TRIGGER_EN;
+		prio = 2;
+		acc = 1;
+		break;
+	case IEEE80211_AC_BK:
+		value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC0_TRIGGER_EN;
+		prio = 0;
+		acc = 0;
+		break;
+	}
+
+	if (enable)
+		arvif->u.sta.uapsd |= value;
+	else
+		arvif->u.sta.uapsd &= ~value;
+
+	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+					  WMI_STA_PS_PARAM_UAPSD,
+					  arvif->u.sta.uapsd);
+	if (ret) {
+		ath10k_warn(ar, "failed to set uapsd params: %d\n", ret);
+		goto exit;
+	}
+
+	if (arvif->u.sta.uapsd)
+		value = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD;
+	else
+		value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
+
+	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+					  WMI_STA_PS_PARAM_RX_WAKE_POLICY,
+					  value);
+	if (ret)
+		ath10k_warn(ar, "failed to set rx wake param: %d\n", ret);
+
+	ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	ret = ath10k_mac_vif_recalc_ps_poll_count(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	if (test_bit(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, ar->wmi.svc_map) ||
+	    test_bit(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, ar->wmi.svc_map)) {
+		/* Only userspace can make an educated decision when to send
+		 * trigger frame. The following effectively disables u-UAPSD
+		 * autotrigger in firmware (which is enabled by default
+		 * provided the autotrigger service is available).
+		 */
+
+		arg.wmm_ac = acc;
+		arg.user_priority = prio;
+		arg.service_interval = 0;
+		arg.suspend_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC;
+		arg.delay_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC;
+
+		ret = ath10k_wmi_vdev_sta_uapsd(ar, arvif->vdev_id,
+						arvif->bssid, &arg, 1);
+		if (ret) {
+			ath10k_warn(ar, "failed to set uapsd auto trigger %d\n",
+				    ret);
+			return ret;
+		}
+	}
+
+exit:
+	return ret;
+}
+
+static int ath10k_conf_tx(struct ieee80211_hw *hw,
+			  struct ieee80211_vif *vif, u16 ac,
+			  const struct ieee80211_tx_queue_params *params)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct wmi_wmm_params_arg *p = NULL;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	switch (ac) {
+	case IEEE80211_AC_VO:
+		p = &arvif->wmm_params.ac_vo;
+		break;
+	case IEEE80211_AC_VI:
+		p = &arvif->wmm_params.ac_vi;
+		break;
+	case IEEE80211_AC_BE:
+		p = &arvif->wmm_params.ac_be;
+		break;
+	case IEEE80211_AC_BK:
+		p = &arvif->wmm_params.ac_bk;
+		break;
+	}
+
+	if (WARN_ON(!p)) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	p->cwmin = params->cw_min;
+	p->cwmax = params->cw_max;
+	p->aifs = params->aifs;
+
+	/*
+	 * The channel time duration programmed in the HW is in absolute
+	 * microseconds, while mac80211 gives the txop in units of
+	 * 32 microseconds.
+	 */
+	p->txop = params->txop * 32;
+
+	if (ar->wmi.ops->gen_vdev_wmm_conf) {
+		ret = ath10k_wmi_vdev_wmm_conf(ar, arvif->vdev_id,
+					       &arvif->wmm_params);
+		if (ret) {
+			ath10k_warn(ar, "failed to set vdev wmm params on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+			goto exit;
+		}
+	} else {
+		/* This won't work well with multi-interface cases but it's
+		 * better than nothing.
+		 */
+		ret = ath10k_wmi_pdev_set_wmm_params(ar, &arvif->wmm_params);
+		if (ret) {
+			ath10k_warn(ar, "failed to set wmm params: %d\n", ret);
+			goto exit;
+		}
+	}
+
+	ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd);
+	if (ret)
+		ath10k_warn(ar, "failed to set sta uapsd: %d\n", ret);
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+#define ATH10K_ROC_TIMEOUT_HZ (2*HZ)
+
+static int ath10k_remain_on_channel(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_channel *chan,
+				    int duration,
+				    enum ieee80211_roc_type type)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct wmi_start_scan_arg arg;
+	int ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	switch (ar->scan.state) {
+	case ATH10K_SCAN_IDLE:
+		reinit_completion(&ar->scan.started);
+		reinit_completion(&ar->scan.completed);
+		reinit_completion(&ar->scan.on_channel);
+		ar->scan.state = ATH10K_SCAN_STARTING;
+		ar->scan.is_roc = true;
+		ar->scan.vdev_id = arvif->vdev_id;
+		ar->scan.roc_freq = chan->center_freq;
+		ret = 0;
+		break;
+	case ATH10K_SCAN_STARTING:
+	case ATH10K_SCAN_RUNNING:
+	case ATH10K_SCAN_ABORTING:
+		ret = -EBUSY;
+		break;
+	}
+	spin_unlock_bh(&ar->data_lock);
+
+	if (ret)
+		goto exit;
+
+	duration = max(duration, WMI_SCAN_CHAN_MIN_TIME_MSEC);
+
+	memset(&arg, 0, sizeof(arg));
+	ath10k_wmi_start_scan_init(ar, &arg);
+	arg.vdev_id = arvif->vdev_id;
+	arg.scan_id = ATH10K_SCAN_ID;
+	arg.n_channels = 1;
+	arg.channels[0] = chan->center_freq;
+	arg.dwell_time_active = duration;
+	arg.dwell_time_passive = duration;
+	arg.max_scan_time = 2 * duration;
+	arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
+	arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ;
+
+	ret = ath10k_start_scan(ar, &arg);
+	if (ret) {
+		ath10k_warn(ar, "failed to start roc scan: %d\n", ret);
+		spin_lock_bh(&ar->data_lock);
+		ar->scan.state = ATH10K_SCAN_IDLE;
+		spin_unlock_bh(&ar->data_lock);
+		goto exit;
+	}
+
+	ret = wait_for_completion_timeout(&ar->scan.on_channel, 3*HZ);
+	if (ret == 0) {
+		ath10k_warn(ar, "failed to switch to channel for roc scan\n");
+
+		ret = ath10k_scan_stop(ar);
+		if (ret)
+			ath10k_warn(ar, "failed to stop scan: %d\n", ret);
+
+		ret = -ETIMEDOUT;
+		goto exit;
+	}
+
+	ret = 0;
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw)
+{
+	struct ath10k *ar = hw->priv;
+
+	mutex_lock(&ar->conf_mutex);
+	ath10k_scan_abort(ar);
+	mutex_unlock(&ar->conf_mutex);
+
+	cancel_delayed_work_sync(&ar->scan.timeout);
+
+	return 0;
+}
+
+/*
+ * Both RTS and Fragmentation threshold are interface-specific
+ * in ath10k, but device-specific in mac80211.
+ */
+
+static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif;
+	int ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+	list_for_each_entry(arvif, &ar->arvifs, list) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d rts threshold %d\n",
+			   arvif->vdev_id, value);
+
+		ret = ath10k_mac_set_rts(arvif, value);
+		if (ret) {
+			ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n",
+				    arvif->vdev_id, ret);
+			break;
+		}
+	}
+	mutex_unlock(&ar->conf_mutex);
+
+	return ret;
+}
+
+static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			 u32 queues, bool drop)
+{
+	struct ath10k *ar = hw->priv;
+	bool skip;
+	int ret;
+
+	/* mac80211 doesn't care if we really xmit queued frames or not
+	 * we'll collect those frames either way if we stop/delete vdevs */
+	if (drop)
+		return;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (ar->state == ATH10K_STATE_WEDGED)
+		goto skip;
+
+	ret = wait_event_timeout(ar->htt.empty_tx_wq, ({
+			bool empty;
+
+			spin_lock_bh(&ar->htt.tx_lock);
+			empty = (ar->htt.num_pending_tx == 0);
+			spin_unlock_bh(&ar->htt.tx_lock);
+
+			skip = (ar->state == ATH10K_STATE_WEDGED) ||
+			       test_bit(ATH10K_FLAG_CRASH_FLUSH,
+					&ar->dev_flags);
+
+			(empty || skip);
+		}), ATH10K_FLUSH_TIMEOUT_HZ);
+
+	if (ret <= 0 || skip)
+		ath10k_warn(ar, "failed to flush transmit queue (skip %i ar-state %i): %i\n",
+			    skip, ar->state, ret);
+
+skip:
+	mutex_unlock(&ar->conf_mutex);
+}
+
+/* TODO: Implement this function properly
+ * For now it is needed to reply to Probe Requests in IBSS mode.
+ * Propably we need this information from FW.
+ */
+static int ath10k_tx_last_beacon(struct ieee80211_hw *hw)
+{
+	return 1;
+}
+
+#ifdef CONFIG_PM
+static int ath10k_suspend(struct ieee80211_hw *hw,
+			  struct cfg80211_wowlan *wowlan)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ret = ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND);
+	if (ret) {
+		if (ret == -ETIMEDOUT)
+			goto resume;
+		ret = 1;
+		goto exit;
+	}
+
+	ret = ath10k_hif_suspend(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to suspend hif: %d\n", ret);
+		goto resume;
+	}
+
+	ret = 0;
+	goto exit;
+resume:
+	ret = ath10k_wmi_pdev_resume_target(ar);
+	if (ret)
+		ath10k_warn(ar, "failed to resume target: %d\n", ret);
+
+	ret = 1;
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_resume(struct ieee80211_hw *hw)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ret = ath10k_hif_resume(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to resume hif: %d\n", ret);
+		ret = 1;
+		goto exit;
+	}
+
+	ret = ath10k_wmi_pdev_resume_target(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to resume target: %d\n", ret);
+		ret = 1;
+		goto exit;
+	}
+
+	ret = 0;
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+#endif
+
+static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
+				     enum ieee80211_reconfig_type reconfig_type)
+{
+	struct ath10k *ar = hw->priv;
+
+	if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART)
+		return;
+
+	mutex_lock(&ar->conf_mutex);
+
+	/* If device failed to restart it will be in a different state, e.g.
+	 * ATH10K_STATE_WEDGED */
+	if (ar->state == ATH10K_STATE_RESTARTED) {
+		ath10k_info(ar, "device successfully recovered\n");
+		ar->state = ATH10K_STATE_ON;
+		ieee80211_wake_queues(ar->hw);
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
+			     struct survey_info *survey)
+{
+	struct ath10k *ar = hw->priv;
+	struct ieee80211_supported_band *sband;
+	struct survey_info *ar_survey = &ar->survey[idx];
+	int ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+
+	sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ];
+	if (sband && idx >= sband->n_channels) {
+		idx -= sband->n_channels;
+		sband = NULL;
+	}
+
+	if (!sband)
+		sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ];
+
+	if (!sband || idx >= sband->n_channels) {
+		ret = -ENOENT;
+		goto exit;
+	}
+
+	spin_lock_bh(&ar->data_lock);
+	memcpy(survey, ar_survey, sizeof(*survey));
+	spin_unlock_bh(&ar->data_lock);
+
+	survey->channel = &sband->channels[idx];
+
+	if (ar->rx_channel == survey->channel)
+		survey->filled |= SURVEY_INFO_IN_USE;
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+/* Helper table for legacy fixed_rate/bitrate_mask */
+static const u8 cck_ofdm_rate[] = {
+	/* CCK */
+	3, /* 1Mbps */
+	2, /* 2Mbps */
+	1, /* 5.5Mbps */
+	0, /* 11Mbps */
+	/* OFDM */
+	3, /* 6Mbps */
+	7, /* 9Mbps */
+	2, /* 12Mbps */
+	6, /* 18Mbps */
+	1, /* 24Mbps */
+	5, /* 36Mbps */
+	0, /* 48Mbps */
+	4, /* 54Mbps */
+};
+
+/* Check if only one bit set */
+static int ath10k_check_single_mask(u32 mask)
+{
+	int bit;
+
+	bit = ffs(mask);
+	if (!bit)
+		return 0;
+
+	mask &= ~BIT(bit - 1);
+	if (mask)
+		return 2;
+
+	return 1;
+}
+
+static bool
+ath10k_default_bitrate_mask(struct ath10k *ar,
+			    enum ieee80211_band band,
+			    const struct cfg80211_bitrate_mask *mask)
+{
+	u32 legacy = 0x00ff;
+	u8 ht = 0xff, i;
+	u16 vht = 0x3ff;
+	u16 nrf = ar->num_rf_chains;
+
+	if (ar->cfg_tx_chainmask)
+		nrf = get_nss_from_chainmask(ar->cfg_tx_chainmask);
+
+	switch (band) {
+	case IEEE80211_BAND_2GHZ:
+		legacy = 0x00fff;
+		vht = 0;
+		break;
+	case IEEE80211_BAND_5GHZ:
+		break;
+	default:
+		return false;
+	}
+
+	if (mask->control[band].legacy != legacy)
+		return false;
+
+	for (i = 0; i < nrf; i++)
+		if (mask->control[band].ht_mcs[i] != ht)
+			return false;
+
+	for (i = 0; i < nrf; i++)
+		if (mask->control[band].vht_mcs[i] != vht)
+			return false;
+
+	return true;
+}
+
+static bool
+ath10k_bitrate_mask_nss(const struct cfg80211_bitrate_mask *mask,
+			enum ieee80211_band band,
+			u8 *fixed_nss)
+{
+	int ht_nss = 0, vht_nss = 0, i;
+
+	/* check legacy */
+	if (ath10k_check_single_mask(mask->control[band].legacy))
+		return false;
+
+	/* check HT */
+	for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) {
+		if (mask->control[band].ht_mcs[i] == 0xff)
+			continue;
+		else if (mask->control[band].ht_mcs[i] == 0x00)
+			break;
+
+		return false;
+	}
+
+	ht_nss = i;
+
+	/* check VHT */
+	for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
+		if (mask->control[band].vht_mcs[i] == 0x03ff)
+			continue;
+		else if (mask->control[band].vht_mcs[i] == 0x0000)
+			break;
+
+		return false;
+	}
+
+	vht_nss = i;
+
+	if (ht_nss > 0 && vht_nss > 0)
+		return false;
+
+	if (ht_nss)
+		*fixed_nss = ht_nss;
+	else if (vht_nss)
+		*fixed_nss = vht_nss;
+	else
+		return false;
+
+	return true;
+}
+
+static bool
+ath10k_bitrate_mask_correct(const struct cfg80211_bitrate_mask *mask,
+			    enum ieee80211_band band,
+			    enum wmi_rate_preamble *preamble)
+{
+	int legacy = 0, ht = 0, vht = 0, i;
+
+	*preamble = WMI_RATE_PREAMBLE_OFDM;
+
+	/* check legacy */
+	legacy = ath10k_check_single_mask(mask->control[band].legacy);
+	if (legacy > 1)
+		return false;
+
+	/* check HT */
+	for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
+		ht += ath10k_check_single_mask(mask->control[band].ht_mcs[i]);
+	if (ht > 1)
+		return false;
+
+	/* check VHT */
+	for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
+		vht += ath10k_check_single_mask(mask->control[band].vht_mcs[i]);
+	if (vht > 1)
+		return false;
+
+	/* Currently we support only one fixed_rate */
+	if ((legacy + ht + vht) != 1)
+		return false;
+
+	if (ht)
+		*preamble = WMI_RATE_PREAMBLE_HT;
+	else if (vht)
+		*preamble = WMI_RATE_PREAMBLE_VHT;
+
+	return true;
+}
+
+static bool
+ath10k_bitrate_mask_rate(struct ath10k *ar,
+			 const struct cfg80211_bitrate_mask *mask,
+			 enum ieee80211_band band,
+			 u8 *fixed_rate,
+			 u8 *fixed_nss)
+{
+	u8 rate = 0, pream = 0, nss = 0, i;
+	enum wmi_rate_preamble preamble;
+
+	/* Check if single rate correct */
+	if (!ath10k_bitrate_mask_correct(mask, band, &preamble))
+		return false;
+
+	pream = preamble;
+
+	switch (preamble) {
+	case WMI_RATE_PREAMBLE_CCK:
+	case WMI_RATE_PREAMBLE_OFDM:
+		i = ffs(mask->control[band].legacy) - 1;
+
+		if (band == IEEE80211_BAND_2GHZ && i < 4)
+			pream = WMI_RATE_PREAMBLE_CCK;
+
+		if (band == IEEE80211_BAND_5GHZ)
+			i += 4;
+
+		if (i >= ARRAY_SIZE(cck_ofdm_rate))
+			return false;
+
+		rate = cck_ofdm_rate[i];
+		break;
+	case WMI_RATE_PREAMBLE_HT:
+		for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
+			if (mask->control[band].ht_mcs[i])
+				break;
+
+		if (i == IEEE80211_HT_MCS_MASK_LEN)
+			return false;
+
+		rate = ffs(mask->control[band].ht_mcs[i]) - 1;
+		nss = i;
+		break;
+	case WMI_RATE_PREAMBLE_VHT:
+		for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
+			if (mask->control[band].vht_mcs[i])
+				break;
+
+		if (i == NL80211_VHT_NSS_MAX)
+			return false;
+
+		rate = ffs(mask->control[band].vht_mcs[i]) - 1;
+		nss = i;
+		break;
+	}
+
+	*fixed_nss = nss + 1;
+	nss <<= 4;
+	pream <<= 6;
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac fixed rate pream 0x%02x nss 0x%02x rate 0x%02x\n",
+		   pream, nss, rate);
+
+	*fixed_rate = pream | nss | rate;
+
+	return true;
+}
+
+static bool ath10k_get_fixed_rate_nss(struct ath10k *ar,
+				      const struct cfg80211_bitrate_mask *mask,
+				      enum ieee80211_band band,
+				      u8 *fixed_rate,
+				      u8 *fixed_nss)
+{
+	/* First check full NSS mask, if we can simply limit NSS */
+	if (ath10k_bitrate_mask_nss(mask, band, fixed_nss))
+		return true;
+
+	/* Next Check single rate is set */
+	return ath10k_bitrate_mask_rate(ar, mask, band, fixed_rate, fixed_nss);
+}
+
+static int ath10k_set_fixed_rate_param(struct ath10k_vif *arvif,
+				       u8 fixed_rate,
+				       u8 fixed_nss,
+				       u8 force_sgi)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 vdev_param;
+	int ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (arvif->fixed_rate == fixed_rate &&
+	    arvif->fixed_nss == fixed_nss &&
+	    arvif->force_sgi == force_sgi)
+		goto exit;
+
+	if (fixed_rate == WMI_FIXED_RATE_NONE)
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac disable fixed bitrate mask\n");
+
+	if (force_sgi)
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac force sgi\n");
+
+	vdev_param = ar->wmi.vdev_param->fixed_rate;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+					vdev_param, fixed_rate);
+	if (ret) {
+		ath10k_warn(ar, "failed to set fixed rate param 0x%02x: %d\n",
+			    fixed_rate, ret);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	arvif->fixed_rate = fixed_rate;
+
+	vdev_param = ar->wmi.vdev_param->nss;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+					vdev_param, fixed_nss);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to set fixed nss param %d: %d\n",
+			    fixed_nss, ret);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	arvif->fixed_nss = fixed_nss;
+
+	vdev_param = ar->wmi.vdev_param->sgi;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+					force_sgi);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to set sgi param %d: %d\n",
+			    force_sgi, ret);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	arvif->force_sgi = force_sgi;
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_set_bitrate_mask(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   const struct cfg80211_bitrate_mask *mask)
+{
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ath10k *ar = arvif->ar;
+	enum ieee80211_band band = ar->hw->conf.chandef.chan->band;
+	u8 fixed_rate = WMI_FIXED_RATE_NONE;
+	u8 fixed_nss = ar->num_rf_chains;
+	u8 force_sgi;
+
+	if (ar->cfg_tx_chainmask)
+		fixed_nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
+
+	force_sgi = mask->control[band].gi;
+	if (force_sgi == NL80211_TXRATE_FORCE_LGI)
+		return -EINVAL;
+
+	if (!ath10k_default_bitrate_mask(ar, band, mask)) {
+		if (!ath10k_get_fixed_rate_nss(ar, mask, band,
+					       &fixed_rate,
+					       &fixed_nss))
+			return -EINVAL;
+	}
+
+	if (fixed_rate == WMI_FIXED_RATE_NONE && force_sgi) {
+		ath10k_warn(ar, "failed to force SGI usage for default rate settings\n");
+		return -EINVAL;
+	}
+
+	return ath10k_set_fixed_rate_param(arvif, fixed_rate,
+					   fixed_nss, force_sgi);
+}
+
+static void ath10k_sta_rc_update(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct ieee80211_sta *sta,
+				 u32 changed)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	u32 bw, smps;
+
+	spin_lock_bh(&ar->data_lock);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac sta rc update for %pM changed %08x bw %d nss %d smps %d\n",
+		   sta->addr, changed, sta->bandwidth, sta->rx_nss,
+		   sta->smps_mode);
+
+	if (changed & IEEE80211_RC_BW_CHANGED) {
+		bw = WMI_PEER_CHWIDTH_20MHZ;
+
+		switch (sta->bandwidth) {
+		case IEEE80211_STA_RX_BW_20:
+			bw = WMI_PEER_CHWIDTH_20MHZ;
+			break;
+		case IEEE80211_STA_RX_BW_40:
+			bw = WMI_PEER_CHWIDTH_40MHZ;
+			break;
+		case IEEE80211_STA_RX_BW_80:
+			bw = WMI_PEER_CHWIDTH_80MHZ;
+			break;
+		case IEEE80211_STA_RX_BW_160:
+			ath10k_warn(ar, "Invalid bandwidth %d in rc update for %pM\n",
+				    sta->bandwidth, sta->addr);
+			bw = WMI_PEER_CHWIDTH_20MHZ;
+			break;
+		}
+
+		arsta->bw = bw;
+	}
+
+	if (changed & IEEE80211_RC_NSS_CHANGED)
+		arsta->nss = sta->rx_nss;
+
+	if (changed & IEEE80211_RC_SMPS_CHANGED) {
+		smps = WMI_PEER_SMPS_PS_NONE;
+
+		switch (sta->smps_mode) {
+		case IEEE80211_SMPS_AUTOMATIC:
+		case IEEE80211_SMPS_OFF:
+			smps = WMI_PEER_SMPS_PS_NONE;
+			break;
+		case IEEE80211_SMPS_STATIC:
+			smps = WMI_PEER_SMPS_STATIC;
+			break;
+		case IEEE80211_SMPS_DYNAMIC:
+			smps = WMI_PEER_SMPS_DYNAMIC;
+			break;
+		case IEEE80211_SMPS_NUM_MODES:
+			ath10k_warn(ar, "Invalid smps %d in sta rc update for %pM\n",
+				    sta->smps_mode, sta->addr);
+			smps = WMI_PEER_SMPS_PS_NONE;
+			break;
+		}
+
+		arsta->smps = smps;
+	}
+
+	arsta->changed |= changed;
+
+	spin_unlock_bh(&ar->data_lock);
+
+	ieee80211_queue_work(hw, &arsta->update_wk);
+}
+
+static u64 ath10k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	/*
+	 * FIXME: Return 0 for time being. Need to figure out whether FW
+	 * has the API to fetch 64-bit local TSF
+	 */
+
+	return 0;
+}
+
+static int ath10k_ampdu_action(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       enum ieee80211_ampdu_mlme_action action,
+			       struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+			       u8 buf_size)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ampdu vdev_id %i sta %pM tid %hu action %d\n",
+		   arvif->vdev_id, sta->addr, tid, action);
+
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+	case IEEE80211_AMPDU_RX_STOP:
+		/* HTT AddBa/DelBa events trigger mac80211 Rx BA session
+		 * creation/removal. Do we need to verify this?
+		 */
+		return 0;
+	case IEEE80211_AMPDU_TX_START:
+	case IEEE80211_AMPDU_TX_STOP_CONT:
+	case IEEE80211_AMPDU_TX_STOP_FLUSH:
+	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		/* Firmware offloads Tx aggregation entirely so deny mac80211
+		 * Tx aggregation requests.
+		 */
+		return -EOPNOTSUPP;
+	}
+
+	return -EINVAL;
+}
+
+static const struct ieee80211_ops ath10k_ops = {
+	.tx				= ath10k_tx,
+	.start				= ath10k_start,
+	.stop				= ath10k_stop,
+	.config				= ath10k_config,
+	.add_interface			= ath10k_add_interface,
+	.remove_interface		= ath10k_remove_interface,
+	.configure_filter		= ath10k_configure_filter,
+	.bss_info_changed		= ath10k_bss_info_changed,
+	.hw_scan			= ath10k_hw_scan,
+	.cancel_hw_scan			= ath10k_cancel_hw_scan,
+	.set_key			= ath10k_set_key,
+	.set_default_unicast_key        = ath10k_set_default_unicast_key,
+	.sta_state			= ath10k_sta_state,
+	.conf_tx			= ath10k_conf_tx,
+	.remain_on_channel		= ath10k_remain_on_channel,
+	.cancel_remain_on_channel	= ath10k_cancel_remain_on_channel,
+	.set_rts_threshold		= ath10k_set_rts_threshold,
+	.flush				= ath10k_flush,
+	.tx_last_beacon			= ath10k_tx_last_beacon,
+	.set_antenna			= ath10k_set_antenna,
+	.get_antenna			= ath10k_get_antenna,
+	.reconfig_complete		= ath10k_reconfig_complete,
+	.get_survey			= ath10k_get_survey,
+	.set_bitrate_mask		= ath10k_set_bitrate_mask,
+	.sta_rc_update			= ath10k_sta_rc_update,
+	.get_tsf			= ath10k_get_tsf,
+	.ampdu_action			= ath10k_ampdu_action,
+	.get_et_sset_count		= ath10k_debug_get_et_sset_count,
+	.get_et_stats			= ath10k_debug_get_et_stats,
+	.get_et_strings			= ath10k_debug_get_et_strings,
+
+	CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
+
+#ifdef CONFIG_PM
+	.suspend			= ath10k_suspend,
+	.resume				= ath10k_resume,
+#endif
+#ifdef CONFIG_MAC80211_DEBUGFS
+	.sta_add_debugfs		= ath10k_sta_add_debugfs,
+#endif
+};
+
+#define RATETAB_ENT(_rate, _rateid, _flags) { \
+	.bitrate		= (_rate), \
+	.flags			= (_flags), \
+	.hw_value		= (_rateid), \
+}
+
+#define CHAN2G(_channel, _freq, _flags) { \
+	.band			= IEEE80211_BAND_2GHZ, \
+	.hw_value		= (_channel), \
+	.center_freq		= (_freq), \
+	.flags			= (_flags), \
+	.max_antenna_gain	= 0, \
+	.max_power		= 30, \
+}
+
+#define CHAN5G(_channel, _freq, _flags) { \
+	.band			= IEEE80211_BAND_5GHZ, \
+	.hw_value		= (_channel), \
+	.center_freq		= (_freq), \
+	.flags			= (_flags), \
+	.max_antenna_gain	= 0, \
+	.max_power		= 30, \
+}
+
+static const struct ieee80211_channel ath10k_2ghz_channels[] = {
+	CHAN2G(1, 2412, 0),
+	CHAN2G(2, 2417, 0),
+	CHAN2G(3, 2422, 0),
+	CHAN2G(4, 2427, 0),
+	CHAN2G(5, 2432, 0),
+	CHAN2G(6, 2437, 0),
+	CHAN2G(7, 2442, 0),
+	CHAN2G(8, 2447, 0),
+	CHAN2G(9, 2452, 0),
+	CHAN2G(10, 2457, 0),
+	CHAN2G(11, 2462, 0),
+	CHAN2G(12, 2467, 0),
+	CHAN2G(13, 2472, 0),
+	CHAN2G(14, 2484, 0),
+};
+
+static const struct ieee80211_channel ath10k_5ghz_channels[] = {
+	CHAN5G(36, 5180, 0),
+	CHAN5G(40, 5200, 0),
+	CHAN5G(44, 5220, 0),
+	CHAN5G(48, 5240, 0),
+	CHAN5G(52, 5260, 0),
+	CHAN5G(56, 5280, 0),
+	CHAN5G(60, 5300, 0),
+	CHAN5G(64, 5320, 0),
+	CHAN5G(100, 5500, 0),
+	CHAN5G(104, 5520, 0),
+	CHAN5G(108, 5540, 0),
+	CHAN5G(112, 5560, 0),
+	CHAN5G(116, 5580, 0),
+	CHAN5G(120, 5600, 0),
+	CHAN5G(124, 5620, 0),
+	CHAN5G(128, 5640, 0),
+	CHAN5G(132, 5660, 0),
+	CHAN5G(136, 5680, 0),
+	CHAN5G(140, 5700, 0),
+	CHAN5G(149, 5745, 0),
+	CHAN5G(153, 5765, 0),
+	CHAN5G(157, 5785, 0),
+	CHAN5G(161, 5805, 0),
+	CHAN5G(165, 5825, 0),
+};
+
+/* Note: Be careful if you re-order these. There is code which depends on this
+ * ordering.
+ */
+static struct ieee80211_rate ath10k_rates[] = {
+	/* CCK */
+	RATETAB_ENT(10,  0x82, 0),
+	RATETAB_ENT(20,  0x84, 0),
+	RATETAB_ENT(55,  0x8b, 0),
+	RATETAB_ENT(110, 0x96, 0),
+	/* OFDM */
+	RATETAB_ENT(60,  0x0c, 0),
+	RATETAB_ENT(90,  0x12, 0),
+	RATETAB_ENT(120, 0x18, 0),
+	RATETAB_ENT(180, 0x24, 0),
+	RATETAB_ENT(240, 0x30, 0),
+	RATETAB_ENT(360, 0x48, 0),
+	RATETAB_ENT(480, 0x60, 0),
+	RATETAB_ENT(540, 0x6c, 0),
+};
+
+#define ath10k_a_rates (ath10k_rates + 4)
+#define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - 4)
+#define ath10k_g_rates (ath10k_rates + 0)
+#define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates))
+
+struct ath10k *ath10k_mac_create(size_t priv_size)
+{
+	struct ieee80211_hw *hw;
+	struct ath10k *ar;
+
+	hw = ieee80211_alloc_hw(sizeof(struct ath10k) + priv_size, &ath10k_ops);
+	if (!hw)
+		return NULL;
+
+	ar = hw->priv;
+	ar->hw = hw;
+
+	return ar;
+}
+
+void ath10k_mac_destroy(struct ath10k *ar)
+{
+	ieee80211_free_hw(ar->hw);
+}
+
+static const struct ieee80211_iface_limit ath10k_if_limits[] = {
+	{
+	.max	= 8,
+	.types	= BIT(NL80211_IFTYPE_STATION)
+		| BIT(NL80211_IFTYPE_P2P_CLIENT)
+	},
+	{
+	.max	= 3,
+	.types	= BIT(NL80211_IFTYPE_P2P_GO)
+	},
+	{
+	.max	= 1,
+	.types	= BIT(NL80211_IFTYPE_P2P_DEVICE)
+	},
+	{
+	.max	= 7,
+	.types	= BIT(NL80211_IFTYPE_AP)
+	},
+};
+
+static const struct ieee80211_iface_limit ath10k_10x_if_limits[] = {
+	{
+	.max	= 8,
+	.types	= BIT(NL80211_IFTYPE_AP)
+	},
+};
+
+static const struct ieee80211_iface_combination ath10k_if_comb[] = {
+	{
+		.limits = ath10k_if_limits,
+		.n_limits = ARRAY_SIZE(ath10k_if_limits),
+		.max_interfaces = 8,
+		.num_different_channels = 1,
+		.beacon_int_infra_match = true,
+	},
+};
+
+static const struct ieee80211_iface_combination ath10k_10x_if_comb[] = {
+	{
+		.limits = ath10k_10x_if_limits,
+		.n_limits = ARRAY_SIZE(ath10k_10x_if_limits),
+		.max_interfaces = 8,
+		.num_different_channels = 1,
+		.beacon_int_infra_match = true,
+#ifdef CONFIG_ATH10K_DFS_CERTIFIED
+		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
+					BIT(NL80211_CHAN_WIDTH_20) |
+					BIT(NL80211_CHAN_WIDTH_40) |
+					BIT(NL80211_CHAN_WIDTH_80),
+#endif
+	},
+};
+
+static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
+{
+	struct ieee80211_sta_vht_cap vht_cap = {0};
+	u16 mcs_map;
+	int i;
+
+	vht_cap.vht_supported = 1;
+	vht_cap.cap = ar->vht_cap_info;
+
+	mcs_map = 0;
+	for (i = 0; i < 8; i++) {
+		if (i < ar->num_rf_chains)
+			mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i*2);
+		else
+			mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i*2);
+	}
+
+	vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
+	vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
+
+	return vht_cap;
+}
+
+static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
+{
+	int i;
+	struct ieee80211_sta_ht_cap ht_cap = {0};
+
+	if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED))
+		return ht_cap;
+
+	ht_cap.ht_supported = 1;
+	ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+	ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
+	ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+	ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
+	ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI)
+		ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI)
+		ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) {
+		u32 smps;
+
+		smps   = WLAN_HT_CAP_SM_PS_DYNAMIC;
+		smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+		ht_cap.cap |= smps;
+	}
+
+	if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC)
+		ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {
+		u32 stbc;
+
+		stbc   = ar->ht_cap_info;
+		stbc  &= WMI_HT_CAP_RX_STBC;
+		stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT;
+		stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT;
+		stbc  &= IEEE80211_HT_CAP_RX_STBC;
+
+		ht_cap.cap |= stbc;
+	}
+
+	if (ar->ht_cap_info & WMI_HT_CAP_LDPC)
+		ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT)
+		ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT;
+
+	/* max AMSDU is implicitly taken from vht_cap_info */
+	if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
+		ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+
+	for (i = 0; i < ar->num_rf_chains; i++)
+		ht_cap.mcs.rx_mask[i] = 0xFF;
+
+	ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
+
+	return ht_cap;
+}
+
+static void ath10k_get_arvif_iter(void *data, u8 *mac,
+				  struct ieee80211_vif *vif)
+{
+	struct ath10k_vif_iter *arvif_iter = data;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+	if (arvif->vdev_id == arvif_iter->vdev_id)
+		arvif_iter->arvif = arvif;
+}
+
+struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id)
+{
+	struct ath10k_vif_iter arvif_iter;
+	u32 flags;
+
+	memset(&arvif_iter, 0, sizeof(struct ath10k_vif_iter));
+	arvif_iter.vdev_id = vdev_id;
+
+	flags = IEEE80211_IFACE_ITER_RESUME_ALL;
+	ieee80211_iterate_active_interfaces_atomic(ar->hw,
+						   flags,
+						   ath10k_get_arvif_iter,
+						   &arvif_iter);
+	if (!arvif_iter.arvif) {
+		ath10k_warn(ar, "No VIF found for vdev %d\n", vdev_id);
+		return NULL;
+	}
+
+	return arvif_iter.arvif;
+}
+
+int ath10k_mac_register(struct ath10k *ar)
+{
+	static const u32 cipher_suites[] = {
+		WLAN_CIPHER_SUITE_WEP40,
+		WLAN_CIPHER_SUITE_WEP104,
+		WLAN_CIPHER_SUITE_TKIP,
+		WLAN_CIPHER_SUITE_CCMP,
+		WLAN_CIPHER_SUITE_AES_CMAC,
+	};
+	struct ieee80211_supported_band *band;
+	struct ieee80211_sta_vht_cap vht_cap;
+	struct ieee80211_sta_ht_cap ht_cap;
+	void *channels;
+	int ret;
+
+	SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr);
+
+	SET_IEEE80211_DEV(ar->hw, ar->dev);
+
+	ht_cap = ath10k_get_ht_cap(ar);
+	vht_cap = ath10k_create_vht_cap(ar);
+
+	if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
+		channels = kmemdup(ath10k_2ghz_channels,
+				   sizeof(ath10k_2ghz_channels),
+				   GFP_KERNEL);
+		if (!channels) {
+			ret = -ENOMEM;
+			goto err_free;
+		}
+
+		band = &ar->mac.sbands[IEEE80211_BAND_2GHZ];
+		band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels);
+		band->channels = channels;
+		band->n_bitrates = ath10k_g_rates_size;
+		band->bitrates = ath10k_g_rates;
+		band->ht_cap = ht_cap;
+
+		/* Enable the VHT support at 2.4 GHz */
+		band->vht_cap = vht_cap;
+
+		ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
+	}
+
+	if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
+		channels = kmemdup(ath10k_5ghz_channels,
+				   sizeof(ath10k_5ghz_channels),
+				   GFP_KERNEL);
+		if (!channels) {
+			ret = -ENOMEM;
+			goto err_free;
+		}
+
+		band = &ar->mac.sbands[IEEE80211_BAND_5GHZ];
+		band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels);
+		band->channels = channels;
+		band->n_bitrates = ath10k_a_rates_size;
+		band->bitrates = ath10k_a_rates;
+		band->ht_cap = ht_cap;
+		band->vht_cap = vht_cap;
+		ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
+	}
+
+	ar->hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_AP);
+
+	ar->hw->wiphy->available_antennas_rx = ar->supp_rx_chainmask;
+	ar->hw->wiphy->available_antennas_tx = ar->supp_tx_chainmask;
+
+	if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->fw_features))
+		ar->hw->wiphy->interface_modes |=
+			BIT(NL80211_IFTYPE_P2P_DEVICE) |
+			BIT(NL80211_IFTYPE_P2P_CLIENT) |
+			BIT(NL80211_IFTYPE_P2P_GO);
+
+	ar->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+			IEEE80211_HW_SUPPORTS_PS |
+			IEEE80211_HW_SUPPORTS_DYNAMIC_PS |
+			IEEE80211_HW_MFP_CAPABLE |
+			IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+			IEEE80211_HW_HAS_RATE_CONTROL |
+			IEEE80211_HW_AP_LINK_PS |
+			IEEE80211_HW_SPECTRUM_MGMT |
+			IEEE80211_HW_SW_CRYPTO_CONTROL;
+
+	ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
+		ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) {
+		ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
+		ar->hw->flags |= IEEE80211_HW_TX_AMPDU_SETUP_IN_HW;
+	}
+
+	ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID;
+	ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN;
+
+	ar->hw->vif_data_size = sizeof(struct ath10k_vif);
+	ar->hw->sta_data_size = sizeof(struct ath10k_sta);
+
+	ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
+
+	if (test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) {
+		ar->hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
+
+		/* Firmware delivers WPS/P2P Probe Requests frames to driver so
+		 * that userspace (e.g. wpa_supplicant/hostapd) can generate
+		 * correct Probe Responses. This is more of a hack advert..
+		 */
+		ar->hw->wiphy->probe_resp_offload |=
+			NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
+			NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
+			NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
+	}
+
+	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
+	ar->hw->wiphy->max_remain_on_channel_duration = 5000;
+
+	ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+	ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
+
+	/*
+	 * on LL hardware queues are managed entirely by the FW
+	 * so we only advertise to mac we can do the queues thing
+	 */
+	ar->hw->queues = 4;
+
+	switch (ar->wmi.op_version) {
+	case ATH10K_FW_WMI_OP_VERSION_MAIN:
+	case ATH10K_FW_WMI_OP_VERSION_TLV:
+		ar->hw->wiphy->iface_combinations = ath10k_if_comb;
+		ar->hw->wiphy->n_iface_combinations =
+			ARRAY_SIZE(ath10k_if_comb);
+		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+		break;
+	case ATH10K_FW_WMI_OP_VERSION_10_1:
+	case ATH10K_FW_WMI_OP_VERSION_10_2:
+	case ATH10K_FW_WMI_OP_VERSION_10_2_4:
+		ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb;
+		ar->hw->wiphy->n_iface_combinations =
+			ARRAY_SIZE(ath10k_10x_if_comb);
+		break;
+	case ATH10K_FW_WMI_OP_VERSION_UNSET:
+	case ATH10K_FW_WMI_OP_VERSION_MAX:
+		WARN_ON(1);
+		ret = -EINVAL;
+		goto err_free;
+	}
+
+	ar->hw->netdev_features = NETIF_F_HW_CSUM;
+
+	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
+		/* Init ath dfs pattern detector */
+		ar->ath_common.debug_mask = ATH_DBG_DFS;
+		ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common,
+							     NL80211_DFS_UNSET);
+
+		if (!ar->dfs_detector)
+			ath10k_warn(ar, "failed to initialise DFS pattern detector\n");
+	}
+
+	ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy,
+			    ath10k_reg_notifier);
+	if (ret) {
+		ath10k_err(ar, "failed to initialise regulatory: %i\n", ret);
+		goto err_free;
+	}
+
+	ar->hw->wiphy->cipher_suites = cipher_suites;
+	ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+
+	ret = ieee80211_register_hw(ar->hw);
+	if (ret) {
+		ath10k_err(ar, "failed to register ieee80211: %d\n", ret);
+		goto err_free;
+	}
+
+	if (!ath_is_world_regd(&ar->ath_common.regulatory)) {
+		ret = regulatory_hint(ar->hw->wiphy,
+				      ar->ath_common.regulatory.alpha2);
+		if (ret)
+			goto err_unregister;
+	}
+
+	return 0;
+
+err_unregister:
+	ieee80211_unregister_hw(ar->hw);
+err_free:
+	kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels);
+	kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels);
+
+	return ret;
+}
+
+void ath10k_mac_unregister(struct ath10k *ar)
+{
+	ieee80211_unregister_hw(ar->hw);
+
+	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
+		ar->dfs_detector->exit(ar->dfs_detector);
+
+	kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels);
+	kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels);
+
+	SET_IEEE80211_DEV(ar->hw, NULL);
+}