Linux-libre 4.5-gnu

1 files changed, 0 insertions, 100 deletions

diff --git a/drivers/net/wireless/iwlegacy/Kconfig b/drivers/net/wireless/iwlegacy/Kconfig
deleted file mode 100644
index fb919727b..000000000
--- a/drivers/net/wireless/iwlegacy/Kconfig
+++ /dev/null
@@ -1,100 +0,0 @@
-config IWLEGACY
-	tristate
-	select FW_LOADER
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_TRIGGERS
-	select MAC80211_LEDS
-
-config IWL4965
-	tristate "Intel Wireless WiFi 4965AGN (iwl4965)"
-	depends on PCI && MAC80211
-	select IWLEGACY
-	---help---
-	  This option enables support for
-
-	  Select to build the driver supporting the:
-
-	  Intel Wireless WiFi Link 4965AGN
-
-	  This driver uses the kernel's mac80211 subsystem.
-
-	  In order to use this driver, you will need a microcode (uCode)
-	  image for it. You can obtain the microcode from:
-
-	          <http://intellinuxwireless.org/>.
-
-	  The microcode is typically installed in /lib/firmware. You can
-	  look in the hotplug script /etc/hotplug/firmware.agent to
-	  determine which directory FIRMWARE_DIR is set to when the script
-	  runs.
-
-	  If you want to compile the driver as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwl4965.
-
-config IWL3945
-	tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
-	depends on PCI && MAC80211
-	select IWLEGACY
-	---help---
-	  Select to build the driver supporting the:
-
-	  Intel PRO/Wireless 3945ABG/BG Network Connection
-
-	  This driver uses the kernel's mac80211 subsystem.
-
-	  In order to use this driver, you will need a microcode (uCode)
-	  image for it. You can obtain the microcode from:
-
-	          <http://intellinuxwireless.org/>.
-
-	  The microcode is typically installed in /lib/firmware. You can
-	  look in the hotplug script /etc/hotplug/firmware.agent to
-	  determine which directory FIRMWARE_DIR is set to when the script
-	  runs.
-
-	  If you want to compile the driver as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwl3945.
-
-menu "iwl3945 / iwl4965 Debugging Options"
-	depends on IWLEGACY
-
-config IWLEGACY_DEBUG
-	bool "Enable full debugging output in iwlegacy (iwl 3945/4965) drivers"
-	depends on IWLEGACY
-	---help---
-	  This option will enable debug tracing output for the iwlegacy
-	  drivers.
-
-	  This will result in the kernel module being ~100k larger.  You can
-	  control which debug output is sent to the kernel log by setting the
-	  value in
-
-		/sys/class/net/wlan0/device/debug_level
-
-	  This entry will only exist if this option is enabled.
-
-	  To set a value, simply echo an 8-byte hex value to the same file:
-
-		  % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
-
-	  You can find the list of debug mask values in:
-		  drivers/net/wireless/iwlegacy/common.h
-
-	  If this is your first time using this driver, you should say Y here
-	  as the debug information can assist others in helping you resolve
-	  any problems you may encounter.
-
-config IWLEGACY_DEBUGFS
-        bool "iwlegacy (iwl 3945/4965) debugfs support"
-        depends on IWLEGACY && MAC80211_DEBUGFS
-        ---help---
-	  Enable creation of debugfs files for the iwlegacy drivers. This
-	  is a low-impact option that allows getting insight into the
-	  driver's state at runtime.
-
-endmenu