Initial import

1 files changed, 2436 insertions, 0 deletions

diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
new file mode 100644
index 000000000..58a42ce58
--- /dev/null
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -0,0 +1,2436 @@
+/*
+ * Marvell Wireless LAN device driver: SDIO specific handling
+ *
+ * Copyright (C) 2011-2014, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include <linux/firmware.h>
+
+#include "decl.h"
+#include "ioctl.h"
+#include "util.h"
+#include "fw.h"
+#include "main.h"
+#include "wmm.h"
+#include "11n.h"
+#include "sdio.h"
+
+
+#define SDIO_VERSION	"1.0"
+
+/* The mwifiex_sdio_remove() callback function is called when
+ * user removes this module from kernel space or ejects
+ * the card from the slot. The driver handles these 2 cases
+ * differently.
+ * If the user is removing the module, the few commands (FUNC_SHUTDOWN,
+ * HS_CANCEL etc.) are sent to the firmware.
+ * If the card is removed, there is no need to send these command.
+ *
+ * The variable 'user_rmmod' is used to distinguish these two
+ * scenarios. This flag is initialized as FALSE in case the card
+ * is removed, and will be set to TRUE for module removal when
+ * module_exit function is called.
+ */
+static u8 user_rmmod;
+
+static struct mwifiex_if_ops sdio_ops;
+static unsigned long iface_work_flags;
+
+static struct semaphore add_remove_card_sem;
+
+static struct memory_type_mapping mem_type_mapping_tbl[] = {
+	{"ITCM", NULL, 0, 0xF0},
+	{"DTCM", NULL, 0, 0xF1},
+	{"SQRAM", NULL, 0, 0xF2},
+	{"APU", NULL, 0, 0xF3},
+	{"CIU", NULL, 0, 0xF4},
+	{"ICU", NULL, 0, 0xF5},
+	{"MAC", NULL, 0, 0xF6},
+	{"EXT7", NULL, 0, 0xF7},
+	{"EXT8", NULL, 0, 0xF8},
+	{"EXT9", NULL, 0, 0xF9},
+	{"EXT10", NULL, 0, 0xFA},
+	{"EXT11", NULL, 0, 0xFB},
+	{"EXT12", NULL, 0, 0xFC},
+	{"EXT13", NULL, 0, 0xFD},
+	{"EXTLAST", NULL, 0, 0xFE},
+};
+
+/*
+ * SDIO probe.
+ *
+ * This function probes an mwifiex device and registers it. It allocates
+ * the card structure, enables SDIO function number and initiates the
+ * device registration and initialization procedure by adding a logical
+ * interface.
+ */
+static int
+mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
+{
+	int ret;
+	struct sdio_mmc_card *card = NULL;
+
+	pr_debug("info: vendor=0x%4.04X device=0x%4.04X class=%d function=%d\n",
+		 func->vendor, func->device, func->class, func->num);
+
+	card = kzalloc(sizeof(struct sdio_mmc_card), GFP_KERNEL);
+	if (!card)
+		return -ENOMEM;
+
+	card->func = func;
+
+	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+
+	if (id->driver_data) {
+		struct mwifiex_sdio_device *data = (void *)id->driver_data;
+
+		card->firmware = data->firmware;
+		card->reg = data->reg;
+		card->max_ports = data->max_ports;
+		card->mp_agg_pkt_limit = data->mp_agg_pkt_limit;
+		card->supports_sdio_new_mode = data->supports_sdio_new_mode;
+		card->has_control_mask = data->has_control_mask;
+		card->tx_buf_size = data->tx_buf_size;
+		card->mp_tx_agg_buf_size = data->mp_tx_agg_buf_size;
+		card->mp_rx_agg_buf_size = data->mp_rx_agg_buf_size;
+		card->can_dump_fw = data->can_dump_fw;
+		card->can_auto_tdls = data->can_auto_tdls;
+		card->can_ext_scan = data->can_ext_scan;
+	}
+
+	sdio_claim_host(func);
+	ret = sdio_enable_func(func);
+	sdio_release_host(func);
+
+	if (ret) {
+		pr_err("%s: failed to enable function\n", __func__);
+		kfree(card);
+		return -EIO;
+	}
+
+	if (mwifiex_add_card(card, &add_remove_card_sem, &sdio_ops,
+			     MWIFIEX_SDIO)) {
+		pr_err("%s: add card failed\n", __func__);
+		kfree(card);
+		sdio_claim_host(func);
+		ret = sdio_disable_func(func);
+		sdio_release_host(func);
+		ret = -1;
+	}
+
+	return ret;
+}
+
+/*
+ * SDIO resume.
+ *
+ * Kernel needs to suspend all functions separately. Therefore all
+ * registered functions must have drivers with suspend and resume
+ * methods. Failing that the kernel simply removes the whole card.
+ *
+ * If already not resumed, this function turns on the traffic and
+ * sends a host sleep cancel request to the firmware.
+ */
+static int mwifiex_sdio_resume(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct sdio_mmc_card *card;
+	struct mwifiex_adapter *adapter;
+	mmc_pm_flag_t pm_flag = 0;
+
+	if (func) {
+		pm_flag = sdio_get_host_pm_caps(func);
+		card = sdio_get_drvdata(func);
+		if (!card || !card->adapter) {
+			pr_err("resume: invalid card or adapter\n");
+			return 0;
+		}
+	} else {
+		pr_err("resume: sdio_func is not specified\n");
+		return 0;
+	}
+
+	adapter = card->adapter;
+
+	if (!adapter->is_suspended) {
+		dev_warn(adapter->dev, "device already resumed\n");
+		return 0;
+	}
+
+	adapter->is_suspended = false;
+
+	/* Disable Host Sleep */
+	mwifiex_cancel_hs(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA),
+			  MWIFIEX_ASYNC_CMD);
+
+	return 0;
+}
+
+/*
+ * SDIO remove.
+ *
+ * This function removes the interface and frees up the card structure.
+ */
+static void
+mwifiex_sdio_remove(struct sdio_func *func)
+{
+	struct sdio_mmc_card *card;
+	struct mwifiex_adapter *adapter;
+	struct mwifiex_private *priv;
+
+	pr_debug("info: SDIO func num=%d\n", func->num);
+
+	card = sdio_get_drvdata(func);
+	if (!card)
+		return;
+
+	adapter = card->adapter;
+	if (!adapter || !adapter->priv_num)
+		return;
+
+	if (user_rmmod) {
+		if (adapter->is_suspended)
+			mwifiex_sdio_resume(adapter->dev);
+
+		mwifiex_deauthenticate_all(adapter);
+
+		priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+		mwifiex_disable_auto_ds(priv);
+		mwifiex_init_shutdown_fw(priv, MWIFIEX_FUNC_SHUTDOWN);
+	}
+
+	mwifiex_remove_card(card->adapter, &add_remove_card_sem);
+}
+
+/*
+ * SDIO suspend.
+ *
+ * Kernel needs to suspend all functions separately. Therefore all
+ * registered functions must have drivers with suspend and resume
+ * methods. Failing that the kernel simply removes the whole card.
+ *
+ * If already not suspended, this function allocates and sends a host
+ * sleep activate request to the firmware and turns off the traffic.
+ */
+static int mwifiex_sdio_suspend(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct sdio_mmc_card *card;
+	struct mwifiex_adapter *adapter;
+	mmc_pm_flag_t pm_flag = 0;
+	int ret = 0;
+
+	if (func) {
+		pm_flag = sdio_get_host_pm_caps(func);
+		pr_debug("cmd: %s: suspend: PM flag = 0x%x\n",
+			 sdio_func_id(func), pm_flag);
+		if (!(pm_flag & MMC_PM_KEEP_POWER)) {
+			pr_err("%s: cannot remain alive while host is"
+				" suspended\n", sdio_func_id(func));
+			return -ENOSYS;
+		}
+
+		card = sdio_get_drvdata(func);
+		if (!card || !card->adapter) {
+			pr_err("suspend: invalid card or adapter\n");
+			return 0;
+		}
+	} else {
+		pr_err("suspend: sdio_func is not specified\n");
+		return 0;
+	}
+
+	adapter = card->adapter;
+
+	/* Enable the Host Sleep */
+	if (!mwifiex_enable_hs(adapter)) {
+		dev_err(adapter->dev, "cmd: failed to suspend\n");
+		adapter->hs_enabling = false;
+		return -EFAULT;
+	}
+
+	dev_dbg(adapter->dev, "cmd: suspend with MMC_PM_KEEP_POWER\n");
+	ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+
+	/* Indicate device suspended */
+	adapter->is_suspended = true;
+	adapter->hs_enabling = false;
+
+	return ret;
+}
+
+/* Device ID for SD8786 */
+#define SDIO_DEVICE_ID_MARVELL_8786   (0x9116)
+/* Device ID for SD8787 */
+#define SDIO_DEVICE_ID_MARVELL_8787   (0x9119)
+/* Device ID for SD8797 */
+#define SDIO_DEVICE_ID_MARVELL_8797   (0x9129)
+/* Device ID for SD8897 */
+#define SDIO_DEVICE_ID_MARVELL_8897   (0x912d)
+/* Device ID for SD8887 */
+#define SDIO_DEVICE_ID_MARVELL_8887   (0x9135)
+/* Device ID for SD8801 */
+#define SDIO_DEVICE_ID_MARVELL_8801   (0x9139)
+
+
+/* WLAN IDs */
+static const struct sdio_device_id mwifiex_ids[] = {
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8786),
+		.driver_data = (unsigned long) &mwifiex_sdio_sd8786},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787),
+		.driver_data = (unsigned long) &mwifiex_sdio_sd8787},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797),
+		.driver_data = (unsigned long) &mwifiex_sdio_sd8797},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8897),
+		.driver_data = (unsigned long) &mwifiex_sdio_sd8897},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887),
+		.driver_data = (unsigned long)&mwifiex_sdio_sd8887},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8801),
+		.driver_data = (unsigned long)&mwifiex_sdio_sd8801},
+	{},
+};
+
+MODULE_DEVICE_TABLE(sdio, mwifiex_ids);
+
+static const struct dev_pm_ops mwifiex_sdio_pm_ops = {
+	.suspend = mwifiex_sdio_suspend,
+	.resume = mwifiex_sdio_resume,
+};
+
+static struct sdio_driver mwifiex_sdio = {
+	.name = "mwifiex_sdio",
+	.id_table = mwifiex_ids,
+	.probe = mwifiex_sdio_probe,
+	.remove = mwifiex_sdio_remove,
+	.drv = {
+		.owner = THIS_MODULE,
+		.pm = &mwifiex_sdio_pm_ops,
+	}
+};
+
+/* Write data into SDIO card register. Caller claims SDIO device. */
+static int
+mwifiex_write_reg_locked(struct sdio_func *func, u32 reg, u8 data)
+{
+	int ret = -1;
+	sdio_writeb(func, data, reg, &ret);
+	return ret;
+}
+
+/*
+ * This function writes data into SDIO card register.
+ */
+static int
+mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u8 data)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	int ret;
+
+	sdio_claim_host(card->func);
+	ret = mwifiex_write_reg_locked(card->func, reg, data);
+	sdio_release_host(card->func);
+
+	return ret;
+}
+
+/*
+ * This function reads data from SDIO card register.
+ */
+static int
+mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u8 *data)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	int ret = -1;
+	u8 val;
+
+	sdio_claim_host(card->func);
+	val = sdio_readb(card->func, reg, &ret);
+	sdio_release_host(card->func);
+
+	*data = val;
+
+	return ret;
+}
+
+/*
+ * This function writes multiple data into SDIO card memory.
+ *
+ * This does not work in suspended mode.
+ */
+static int
+mwifiex_write_data_sync(struct mwifiex_adapter *adapter,
+			u8 *buffer, u32 pkt_len, u32 port)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	int ret;
+	u8 blk_mode =
+		(port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE;
+	u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1;
+	u32 blk_cnt =
+		(blk_mode ==
+		 BLOCK_MODE) ? (pkt_len /
+				MWIFIEX_SDIO_BLOCK_SIZE) : pkt_len;
+	u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK);
+
+	if (adapter->is_suspended) {
+		dev_err(adapter->dev,
+			"%s: not allowed while suspended\n", __func__);
+		return -1;
+	}
+
+	sdio_claim_host(card->func);
+
+	ret = sdio_writesb(card->func, ioport, buffer, blk_cnt * blk_size);
+
+	sdio_release_host(card->func);
+
+	return ret;
+}
+
+/*
+ * This function reads multiple data from SDIO card memory.
+ */
+static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *buffer,
+				  u32 len, u32 port, u8 claim)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	int ret;
+	u8 blk_mode = (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE
+		       : BLOCK_MODE;
+	u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1;
+	u32 blk_cnt = (blk_mode == BLOCK_MODE) ? (len / MWIFIEX_SDIO_BLOCK_SIZE)
+			: len;
+	u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK);
+
+	if (claim)
+		sdio_claim_host(card->func);
+
+	ret = sdio_readsb(card->func, buffer, ioport, blk_cnt * blk_size);
+
+	if (claim)
+		sdio_release_host(card->func);
+
+	return ret;
+}
+
+/*
+ * This function wakes up the card.
+ *
+ * A host power up command is written to the card configuration
+ * register to wake up the card.
+ */
+static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter)
+{
+	dev_dbg(adapter->dev, "event: wakeup device...\n");
+
+	return mwifiex_write_reg(adapter, CONFIGURATION_REG, HOST_POWER_UP);
+}
+
+/*
+ * This function is called after the card has woken up.
+ *
+ * The card configuration register is reset.
+ */
+static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter)
+{
+	dev_dbg(adapter->dev, "cmd: wakeup device completed\n");
+
+	return mwifiex_write_reg(adapter, CONFIGURATION_REG, 0);
+}
+
+/*
+ * This function is used to initialize IO ports for the
+ * chipsets supporting SDIO new mode eg SD8897.
+ */
+static int mwifiex_init_sdio_new_mode(struct mwifiex_adapter *adapter)
+{
+	u8 reg;
+	struct sdio_mmc_card *card = adapter->card;
+
+	adapter->ioport = MEM_PORT;
+
+	/* enable sdio new mode */
+	if (mwifiex_read_reg(adapter, card->reg->card_cfg_2_1_reg, &reg))
+		return -1;
+	if (mwifiex_write_reg(adapter, card->reg->card_cfg_2_1_reg,
+			      reg | CMD53_NEW_MODE))
+		return -1;
+
+	/* Configure cmd port and enable reading rx length from the register */
+	if (mwifiex_read_reg(adapter, card->reg->cmd_cfg_0, &reg))
+		return -1;
+	if (mwifiex_write_reg(adapter, card->reg->cmd_cfg_0,
+			      reg | CMD_PORT_RD_LEN_EN))
+		return -1;
+
+	/* Enable Dnld/Upld ready auto reset for cmd port after cmd53 is
+	 * completed
+	 */
+	if (mwifiex_read_reg(adapter, card->reg->cmd_cfg_1, &reg))
+		return -1;
+	if (mwifiex_write_reg(adapter, card->reg->cmd_cfg_1,
+			      reg | CMD_PORT_AUTO_EN))
+		return -1;
+
+	return 0;
+}
+
+/* This function initializes the IO ports.
+ *
+ * The following operations are performed -
+ *      - Read the IO ports (0, 1 and 2)
+ *      - Set host interrupt Reset-To-Read to clear
+ *      - Set auto re-enable interrupt
+ */
+static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter)
+{
+	u8 reg;
+	struct sdio_mmc_card *card = adapter->card;
+
+	adapter->ioport = 0;
+
+	if (card->supports_sdio_new_mode) {
+		if (mwifiex_init_sdio_new_mode(adapter))
+			return -1;
+		goto cont;
+	}
+
+	/* Read the IO port */
+	if (!mwifiex_read_reg(adapter, card->reg->io_port_0_reg, &reg))
+		adapter->ioport |= (reg & 0xff);
+	else
+		return -1;
+
+	if (!mwifiex_read_reg(adapter, card->reg->io_port_1_reg, &reg))
+		adapter->ioport |= ((reg & 0xff) << 8);
+	else
+		return -1;
+
+	if (!mwifiex_read_reg(adapter, card->reg->io_port_2_reg, &reg))
+		adapter->ioport |= ((reg & 0xff) << 16);
+	else
+		return -1;
+cont:
+	pr_debug("info: SDIO FUNC1 IO port: %#x\n", adapter->ioport);
+
+	/* Set Host interrupt reset to read to clear */
+	if (!mwifiex_read_reg(adapter, card->reg->host_int_rsr_reg, &reg))
+		mwifiex_write_reg(adapter, card->reg->host_int_rsr_reg,
+				  reg | card->reg->sdio_int_mask);
+	else
+		return -1;
+
+	/* Dnld/Upld ready set to auto reset */
+	if (!mwifiex_read_reg(adapter, card->reg->card_misc_cfg_reg, &reg))
+		mwifiex_write_reg(adapter, card->reg->card_misc_cfg_reg,
+				  reg | AUTO_RE_ENABLE_INT);
+	else
+		return -1;
+
+	return 0;
+}
+
+/*
+ * This function sends data to the card.
+ */
+static int mwifiex_write_data_to_card(struct mwifiex_adapter *adapter,
+				      u8 *payload, u32 pkt_len, u32 port)
+{
+	u32 i = 0;
+	int ret;
+
+	do {
+		ret = mwifiex_write_data_sync(adapter, payload, pkt_len, port);
+		if (ret) {
+			i++;
+			dev_err(adapter->dev, "host_to_card, write iomem"
+					" (%d) failed: %d\n", i, ret);
+			if (mwifiex_write_reg(adapter, CONFIGURATION_REG, 0x04))
+				dev_err(adapter->dev, "write CFG reg failed\n");
+
+			ret = -1;
+			if (i > MAX_WRITE_IOMEM_RETRY)
+				return ret;
+		}
+	} while (ret == -1);
+
+	return ret;
+}
+
+/*
+ * This function gets the read port.
+ *
+ * If control port bit is set in MP read bitmap, the control port
+ * is returned, otherwise the current read port is returned and
+ * the value is increased (provided it does not reach the maximum
+ * limit, in which case it is reset to 1)
+ */
+static int mwifiex_get_rd_port(struct mwifiex_adapter *adapter, u8 *port)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
+	u32 rd_bitmap = card->mp_rd_bitmap;
+
+	dev_dbg(adapter->dev, "data: mp_rd_bitmap=0x%08x\n", rd_bitmap);
+
+	if (card->supports_sdio_new_mode) {
+		if (!(rd_bitmap & reg->data_port_mask))
+			return -1;
+	} else {
+		if (!(rd_bitmap & (CTRL_PORT_MASK | reg->data_port_mask)))
+			return -1;
+	}
+
+	if ((card->has_control_mask) &&
+	    (card->mp_rd_bitmap & CTRL_PORT_MASK)) {
+		card->mp_rd_bitmap &= (u32) (~CTRL_PORT_MASK);
+		*port = CTRL_PORT;
+		dev_dbg(adapter->dev, "data: port=%d mp_rd_bitmap=0x%08x\n",
+			*port, card->mp_rd_bitmap);
+		return 0;
+	}
+
+	if (!(card->mp_rd_bitmap & (1 << card->curr_rd_port)))
+		return -1;
+
+	/* We are now handling the SDIO data ports */
+	card->mp_rd_bitmap &= (u32)(~(1 << card->curr_rd_port));
+	*port = card->curr_rd_port;
+
+	if (++card->curr_rd_port == card->max_ports)
+		card->curr_rd_port = reg->start_rd_port;
+
+	dev_dbg(adapter->dev,
+		"data: port=%d mp_rd_bitmap=0x%08x -> 0x%08x\n",
+		*port, rd_bitmap, card->mp_rd_bitmap);
+
+	return 0;
+}
+
+/*
+ * This function gets the write port for data.
+ *
+ * The current write port is returned if available and the value is
+ * increased (provided it does not reach the maximum limit, in which
+ * case it is reset to 1)
+ */
+static int mwifiex_get_wr_port_data(struct mwifiex_adapter *adapter, u32 *port)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
+	u32 wr_bitmap = card->mp_wr_bitmap;
+
+	dev_dbg(adapter->dev, "data: mp_wr_bitmap=0x%08x\n", wr_bitmap);
+
+	if (!(wr_bitmap & card->mp_data_port_mask)) {
+		adapter->data_sent = true;
+		return -EBUSY;
+	}
+
+	if (card->mp_wr_bitmap & (1 << card->curr_wr_port)) {
+		card->mp_wr_bitmap &= (u32) (~(1 << card->curr_wr_port));
+		*port = card->curr_wr_port;
+		if (++card->curr_wr_port == card->mp_end_port)
+			card->curr_wr_port = reg->start_wr_port;
+	} else {
+		adapter->data_sent = true;
+		return -EBUSY;
+	}
+
+	if ((card->has_control_mask) && (*port == CTRL_PORT)) {
+		dev_err(adapter->dev,
+			"invalid data port=%d cur port=%d mp_wr_bitmap=0x%08x -> 0x%08x\n",
+			*port, card->curr_wr_port, wr_bitmap,
+			card->mp_wr_bitmap);
+		return -1;
+	}
+
+	dev_dbg(adapter->dev, "data: port=%d mp_wr_bitmap=0x%08x -> 0x%08x\n",
+		*port, wr_bitmap, card->mp_wr_bitmap);
+
+	return 0;
+}
+
+/*
+ * This function polls the card status.
+ */
+static int
+mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	u32 tries;
+	u8 cs;
+
+	for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+		if (mwifiex_read_reg(adapter, card->reg->poll_reg, &cs))
+			break;
+		else if ((cs & bits) == bits)
+			return 0;
+
+		usleep_range(10, 20);
+	}
+
+	dev_err(adapter->dev, "poll card status failed, tries = %d\n", tries);
+
+	return -1;
+}
+
+/*
+ * This function reads the firmware status.
+ */
+static int
+mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
+	u8 fws0, fws1;
+
+	if (mwifiex_read_reg(adapter, reg->status_reg_0, &fws0))
+		return -1;
+
+	if (mwifiex_read_reg(adapter, reg->status_reg_1, &fws1))
+		return -1;
+
+	*dat = (u16) ((fws1 << 8) | fws0);
+
+	return 0;
+}
+
+/*
+ * This function disables the host interrupt.
+ *
+ * The host interrupt mask is read, the disable bit is reset and
+ * written back to the card host interrupt mask register.
+ */
+static void mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	struct sdio_func *func = card->func;
+
+	sdio_claim_host(func);
+	mwifiex_write_reg_locked(func, card->reg->host_int_mask_reg, 0);
+	sdio_release_irq(func);
+	sdio_release_host(func);
+}
+
+/*
+ * This function reads the interrupt status from card.
+ */
+static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	u8 sdio_ireg;
+	unsigned long flags;
+
+	if (mwifiex_read_data_sync(adapter, card->mp_regs,
+				   card->reg->max_mp_regs,
+				   REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK, 0)) {
+		dev_err(adapter->dev, "read mp_regs failed\n");
+		return;
+	}
+
+	sdio_ireg = card->mp_regs[card->reg->host_int_status_reg];
+	if (sdio_ireg) {
+		/*
+		 * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
+		 * For SDIO new mode CMD port interrupts
+		 *	DN_LD_CMD_PORT_HOST_INT_STATUS and/or
+		 *	UP_LD_CMD_PORT_HOST_INT_STATUS
+		 * Clear the interrupt status register
+		 */
+		dev_dbg(adapter->dev, "int: sdio_ireg = %#x\n", sdio_ireg);
+		spin_lock_irqsave(&adapter->int_lock, flags);
+		adapter->int_status |= sdio_ireg;
+		spin_unlock_irqrestore(&adapter->int_lock, flags);
+	}
+}
+
+/*
+ * SDIO interrupt handler.
+ *
+ * This function reads the interrupt status from firmware and handles
+ * the interrupt in current thread (ksdioirqd) right away.
+ */
+static void
+mwifiex_sdio_interrupt(struct sdio_func *func)
+{
+	struct mwifiex_adapter *adapter;
+	struct sdio_mmc_card *card;
+
+	card = sdio_get_drvdata(func);
+	if (!card || !card->adapter) {
+		pr_debug("int: func=%p card=%p adapter=%p\n",
+			 func, card, card ? card->adapter : NULL);
+		return;
+	}
+	adapter = card->adapter;
+
+	if (!adapter->pps_uapsd_mode && adapter->ps_state == PS_STATE_SLEEP)
+		adapter->ps_state = PS_STATE_AWAKE;
+
+	mwifiex_interrupt_status(adapter);
+	mwifiex_main_process(adapter);
+}
+
+/*
+ * This function enables the host interrupt.
+ *
+ * The host interrupt enable mask is written to the card
+ * host interrupt mask register.
+ */
+static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	struct sdio_func *func = card->func;
+	int ret;
+
+	sdio_claim_host(func);
+
+	/* Request the SDIO IRQ */
+	ret = sdio_claim_irq(func, mwifiex_sdio_interrupt);
+	if (ret) {
+		dev_err(adapter->dev, "claim irq failed: ret=%d\n", ret);
+		goto out;
+	}
+
+	/* Simply write the mask to the register */
+	ret = mwifiex_write_reg_locked(func, card->reg->host_int_mask_reg,
+				       card->reg->host_int_enable);
+	if (ret) {
+		dev_err(adapter->dev, "enable host interrupt failed\n");
+		sdio_release_irq(func);
+	}
+
+out:
+	sdio_release_host(func);
+	return ret;
+}
+
+/*
+ * This function sends a data buffer to the card.
+ */
+static int mwifiex_sdio_card_to_host(struct mwifiex_adapter *adapter,
+				     u32 *type, u8 *buffer,
+				     u32 npayload, u32 ioport)
+{
+	int ret;
+	u32 nb;
+
+	if (!buffer) {
+		dev_err(adapter->dev, "%s: buffer is NULL\n", __func__);
+		return -1;
+	}
+
+	ret = mwifiex_read_data_sync(adapter, buffer, npayload, ioport, 1);
+
+	if (ret) {
+		dev_err(adapter->dev, "%s: read iomem failed: %d\n", __func__,
+			ret);
+		return -1;
+	}
+
+	nb = le16_to_cpu(*(__le16 *) (buffer));
+	if (nb > npayload) {
+		dev_err(adapter->dev, "%s: invalid packet, nb=%d npayload=%d\n",
+			__func__, nb, npayload);
+		return -1;
+	}
+
+	*type = le16_to_cpu(*(__le16 *) (buffer + 2));
+
+	return ret;
+}
+
+/*
+ * This function downloads the firmware to the card.
+ *
+ * Firmware is downloaded to the card in blocks. Every block download
+ * is tested for CRC errors, and retried a number of times before
+ * returning failure.
+ */
+static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
+				    struct mwifiex_fw_image *fw)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
+	int ret;
+	u8 *firmware = fw->fw_buf;
+	u32 firmware_len = fw->fw_len;
+	u32 offset = 0;
+	u8 base0, base1;
+	u8 *fwbuf;
+	u16 len = 0;
+	u32 txlen, tx_blocks = 0, tries;
+	u32 i = 0;
+
+	if (!firmware_len) {
+		dev_err(adapter->dev,
+			"firmware image not found! Terminating download\n");
+		return -1;
+	}
+
+	dev_dbg(adapter->dev, "info: downloading FW image (%d bytes)\n",
+		firmware_len);
+
+	/* Assume that the allocated buffer is 8-byte aligned */
+	fwbuf = kzalloc(MWIFIEX_UPLD_SIZE, GFP_KERNEL);
+	if (!fwbuf)
+		return -ENOMEM;
+
+	/* Perform firmware data transfer */
+	do {
+		/* The host polls for the DN_LD_CARD_RDY and CARD_IO_READY
+		   bits */
+		ret = mwifiex_sdio_poll_card_status(adapter, CARD_IO_READY |
+						    DN_LD_CARD_RDY);
+		if (ret) {
+			dev_err(adapter->dev, "FW download with helper:"
+				" poll status timeout @ %d\n", offset);
+			goto done;
+		}
+
+		/* More data? */
+		if (offset >= firmware_len)
+			break;
+
+		for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+			ret = mwifiex_read_reg(adapter, reg->base_0_reg,
+					       &base0);
+			if (ret) {
+				dev_err(adapter->dev,
+					"dev BASE0 register read failed: "
+					"base0=%#04X(%d). Terminating dnld\n",
+					base0, base0);
+				goto done;
+			}
+			ret = mwifiex_read_reg(adapter, reg->base_1_reg,
+					       &base1);
+			if (ret) {
+				dev_err(adapter->dev,
+					"dev BASE1 register read failed: "
+					"base1=%#04X(%d). Terminating dnld\n",
+					base1, base1);
+				goto done;
+			}
+			len = (u16) (((base1 & 0xff) << 8) | (base0 & 0xff));
+
+			if (len)
+				break;
+
+			usleep_range(10, 20);
+		}
+
+		if (!len) {
+			break;
+		} else if (len > MWIFIEX_UPLD_SIZE) {
+			dev_err(adapter->dev,
+				"FW dnld failed @ %d, invalid length %d\n",
+				offset, len);
+			ret = -1;
+			goto done;
+		}
+
+		txlen = len;
+
+		if (len & BIT(0)) {
+			i++;
+			if (i > MAX_WRITE_IOMEM_RETRY) {
+				dev_err(adapter->dev,
+					"FW dnld failed @ %d, over max retry\n",
+					offset);
+				ret = -1;
+				goto done;
+			}
+			dev_err(adapter->dev, "CRC indicated by the helper:"
+				" len = 0x%04X, txlen = %d\n", len, txlen);
+			len &= ~BIT(0);
+			/* Setting this to 0 to resend from same offset */
+			txlen = 0;
+		} else {
+			i = 0;
+
+			/* Set blocksize to transfer - checking for last
+			   block */
+			if (firmware_len - offset < txlen)
+				txlen = firmware_len - offset;
+
+			tx_blocks = (txlen + MWIFIEX_SDIO_BLOCK_SIZE - 1)
+				    / MWIFIEX_SDIO_BLOCK_SIZE;
+
+			/* Copy payload to buffer */
+			memmove(fwbuf, &firmware[offset], txlen);
+		}
+
+		ret = mwifiex_write_data_sync(adapter, fwbuf, tx_blocks *
+					      MWIFIEX_SDIO_BLOCK_SIZE,
+					      adapter->ioport);
+		if (ret) {
+			dev_err(adapter->dev,
+				"FW download, write iomem (%d) failed @ %d\n",
+				i, offset);
+			if (mwifiex_write_reg(adapter, CONFIGURATION_REG, 0x04))
+				dev_err(adapter->dev, "write CFG reg failed\n");
+
+			ret = -1;
+			goto done;
+		}
+
+		offset += txlen;
+	} while (true);
+
+	dev_notice(adapter->dev,
+		   "info: FW download over, size %d bytes\n", offset);
+
+	ret = 0;
+done:
+	kfree(fwbuf);
+	return ret;
+}
+
+/*
+ * This function checks the firmware status in card.
+ *
+ * The winner interface is also determined by this function.
+ */
+static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
+				   u32 poll_num)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	int ret = 0;
+	u16 firmware_stat;
+	u32 tries;
+	u8 winner_status;
+
+	/* Wait for firmware initialization event */
+	for (tries = 0; tries < poll_num; tries++) {
+		ret = mwifiex_sdio_read_fw_status(adapter, &firmware_stat);
+		if (ret)
+			continue;
+		if (firmware_stat == FIRMWARE_READY_SDIO) {
+			ret = 0;
+			break;
+		} else {
+			msleep(100);
+			ret = -1;
+		}
+	}
+
+	if (ret) {
+		if (mwifiex_read_reg
+		    (adapter, card->reg->status_reg_0, &winner_status))
+			winner_status = 0;
+
+		if (winner_status)
+			adapter->winner = 0;
+		else
+			adapter->winner = 1;
+	}
+	return ret;
+}
+
+/*
+ * This function decode sdio aggreation pkt.
+ *
+ * Based on the the data block size and pkt_len,
+ * skb data will be decoded to few packets.
+ */
+static void mwifiex_deaggr_sdio_pkt(struct mwifiex_adapter *adapter,
+				    struct sk_buff *skb)
+{
+	u32 total_pkt_len, pkt_len;
+	struct sk_buff *skb_deaggr;
+	u32 pkt_type;
+	u16 blk_size;
+	u8 blk_num;
+	u8 *data;
+
+	data = skb->data;
+	total_pkt_len = skb->len;
+
+	while (total_pkt_len >= (SDIO_HEADER_OFFSET + INTF_HEADER_LEN)) {
+		if (total_pkt_len < adapter->sdio_rx_block_size)
+			break;
+		blk_num = *(data + BLOCK_NUMBER_OFFSET);
+		blk_size = adapter->sdio_rx_block_size * blk_num;
+		if (blk_size > total_pkt_len) {
+			dev_err(adapter->dev, "%s: error in pkt,\t"
+				"blk_num=%d, blk_size=%d, total_pkt_len=%d\n",
+				__func__, blk_num, blk_size, total_pkt_len);
+			break;
+		}
+		pkt_len = le16_to_cpu(*(__le16 *)(data + SDIO_HEADER_OFFSET));
+		pkt_type = le16_to_cpu(*(__le16 *)(data + SDIO_HEADER_OFFSET +
+					 2));
+		if ((pkt_len + SDIO_HEADER_OFFSET) > blk_size) {
+			dev_err(adapter->dev, "%s: error in pkt,\t"
+				"pkt_len=%d, blk_size=%d\n",
+				__func__, pkt_len, blk_size);
+			break;
+		}
+		skb_deaggr = mwifiex_alloc_dma_align_buf(pkt_len,
+							 GFP_KERNEL | GFP_DMA);
+		if (!skb_deaggr)
+			break;
+		skb_put(skb_deaggr, pkt_len);
+		memcpy(skb_deaggr->data, data + SDIO_HEADER_OFFSET, pkt_len);
+		skb_pull(skb_deaggr, INTF_HEADER_LEN);
+
+		mwifiex_handle_rx_packet(adapter, skb_deaggr);
+		data += blk_size;
+		total_pkt_len -= blk_size;
+	}
+}
+
+/*
+ * This function decodes a received packet.
+ *
+ * Based on the type, the packet is treated as either a data, or
+ * a command response, or an event, and the correct handler
+ * function is invoked.
+ */
+static int mwifiex_decode_rx_packet(struct mwifiex_adapter *adapter,
+				    struct sk_buff *skb, u32 upld_typ)
+{
+	u8 *cmd_buf;
+	__le16 *curr_ptr = (__le16 *)skb->data;
+	u16 pkt_len = le16_to_cpu(*curr_ptr);
+	struct mwifiex_rxinfo *rx_info;
+
+	if (upld_typ != MWIFIEX_TYPE_AGGR_DATA) {
+		skb_trim(skb, pkt_len);
+		skb_pull(skb, INTF_HEADER_LEN);
+	}
+
+	switch (upld_typ) {
+	case MWIFIEX_TYPE_AGGR_DATA:
+		dev_dbg(adapter->dev, "info: --- Rx: Aggr Data packet ---\n");
+		rx_info = MWIFIEX_SKB_RXCB(skb);
+		rx_info->buf_type = MWIFIEX_TYPE_AGGR_DATA;
+		if (adapter->rx_work_enabled) {
+			skb_queue_tail(&adapter->rx_data_q, skb);
+			atomic_inc(&adapter->rx_pending);
+			adapter->data_received = true;
+		} else {
+			mwifiex_deaggr_sdio_pkt(adapter, skb);
+			dev_kfree_skb_any(skb);
+		}
+		break;
+
+	case MWIFIEX_TYPE_DATA:
+		dev_dbg(adapter->dev, "info: --- Rx: Data packet ---\n");
+		if (adapter->rx_work_enabled) {
+			skb_queue_tail(&adapter->rx_data_q, skb);
+			adapter->data_received = true;
+			atomic_inc(&adapter->rx_pending);
+		} else {
+			mwifiex_handle_rx_packet(adapter, skb);
+		}
+		break;
+
+	case MWIFIEX_TYPE_CMD:
+		dev_dbg(adapter->dev, "info: --- Rx: Cmd Response ---\n");
+		/* take care of curr_cmd = NULL case */
+		if (!adapter->curr_cmd) {
+			cmd_buf = adapter->upld_buf;
+
+			if (adapter->ps_state == PS_STATE_SLEEP_CFM)
+				mwifiex_process_sleep_confirm_resp(adapter,
+								   skb->data,
+								   skb->len);
+
+			memcpy(cmd_buf, skb->data,
+			       min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER,
+				     skb->len));
+
+			dev_kfree_skb_any(skb);
+		} else {
+			adapter->cmd_resp_received = true;
+			adapter->curr_cmd->resp_skb = skb;
+		}
+		break;
+
+	case MWIFIEX_TYPE_EVENT:
+		dev_dbg(adapter->dev, "info: --- Rx: Event ---\n");
+		adapter->event_cause = le32_to_cpu(*(__le32 *) skb->data);
+
+		if ((skb->len > 0) && (skb->len  < MAX_EVENT_SIZE))
+			memcpy(adapter->event_body,
+			       skb->data + MWIFIEX_EVENT_HEADER_LEN,
+			       skb->len);
+
+		/* event cause has been saved to adapter->event_cause */
+		adapter->event_received = true;
+		adapter->event_skb = skb;
+
+		break;
+
+	default:
+		dev_err(adapter->dev, "unknown upload type %#x\n", upld_typ);
+		dev_kfree_skb_any(skb);
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * This function transfers received packets from card to driver, performing
+ * aggregation if required.
+ *
+ * For data received on control port, or if aggregation is disabled, the
+ * received buffers are uploaded as separate packets. However, if aggregation
+ * is enabled and required, the buffers are copied onto an aggregation buffer,
+ * provided there is space left, processed and finally uploaded.
+ */
+static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
+					     u16 rx_len, u8 port)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	s32 f_do_rx_aggr = 0;
+	s32 f_do_rx_cur = 0;
+	s32 f_aggr_cur = 0;
+	s32 f_post_aggr_cur = 0;
+	struct sk_buff *skb_deaggr;
+	struct sk_buff *skb = NULL;
+	u32 pkt_len, pkt_type, mport, pind;
+	u8 *curr_ptr;
+
+	if ((card->has_control_mask) && (port == CTRL_PORT)) {
+		/* Read the command Resp without aggr */
+		dev_dbg(adapter->dev, "info: %s: no aggregation for cmd "
+			"response\n", __func__);
+
+		f_do_rx_cur = 1;
+		goto rx_curr_single;
+	}
+
+	if (!card->mpa_rx.enabled) {
+		dev_dbg(adapter->dev, "info: %s: rx aggregation disabled\n",
+			__func__);
+
+		f_do_rx_cur = 1;
+		goto rx_curr_single;
+	}
+
+	if ((!card->has_control_mask && (card->mp_rd_bitmap &
+					 card->reg->data_port_mask)) ||
+	    (card->has_control_mask && (card->mp_rd_bitmap &
+					(~((u32) CTRL_PORT_MASK))))) {
+		/* Some more data RX pending */
+		dev_dbg(adapter->dev, "info: %s: not last packet\n", __func__);
+
+		if (MP_RX_AGGR_IN_PROGRESS(card)) {
+			if (MP_RX_AGGR_BUF_HAS_ROOM(card, rx_len)) {
+				f_aggr_cur = 1;
+			} else {
+				/* No room in Aggr buf, do rx aggr now */
+				f_do_rx_aggr = 1;
+				f_post_aggr_cur = 1;
+			}
+		} else {
+			/* Rx aggr not in progress */
+			f_aggr_cur = 1;
+		}
+
+	} else {
+		/* No more data RX pending */
+		dev_dbg(adapter->dev, "info: %s: last packet\n", __func__);
+
+		if (MP_RX_AGGR_IN_PROGRESS(card)) {
+			f_do_rx_aggr = 1;
+			if (MP_RX_AGGR_BUF_HAS_ROOM(card, rx_len))
+				f_aggr_cur = 1;
+			else
+				/* No room in Aggr buf, do rx aggr now */
+				f_do_rx_cur = 1;
+		} else {
+			f_do_rx_cur = 1;
+		}
+	}
+
+	if (f_aggr_cur) {
+		dev_dbg(adapter->dev, "info: current packet aggregation\n");
+		/* Curr pkt can be aggregated */
+		mp_rx_aggr_setup(card, rx_len, port);
+
+		if (MP_RX_AGGR_PKT_LIMIT_REACHED(card) ||
+		    mp_rx_aggr_port_limit_reached(card)) {
+			dev_dbg(adapter->dev, "info: %s: aggregated packet "
+				"limit reached\n", __func__);
+			/* No more pkts allowed in Aggr buf, rx it */
+			f_do_rx_aggr = 1;
+		}
+	}
+
+	if (f_do_rx_aggr) {
+		/* do aggr RX now */
+		dev_dbg(adapter->dev, "info: do_rx_aggr: num of packets: %d\n",
+			card->mpa_rx.pkt_cnt);
+
+		if (card->supports_sdio_new_mode) {
+			int i;
+			u32 port_count;
+
+			for (i = 0, port_count = 0; i < card->max_ports; i++)
+				if (card->mpa_rx.ports & BIT(i))
+					port_count++;
+
+			/* Reading data from "start_port + 0" to "start_port +
+			 * port_count -1", so decrease the count by 1
+			 */
+			port_count--;
+			mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+				 (port_count << 8)) + card->mpa_rx.start_port;
+		} else {
+			mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+				 (card->mpa_rx.ports << 4)) +
+				 card->mpa_rx.start_port;
+		}
+
+		if (mwifiex_read_data_sync(adapter, card->mpa_rx.buf,
+					   card->mpa_rx.buf_len, mport, 1))
+			goto error;
+
+		curr_ptr = card->mpa_rx.buf;
+
+		for (pind = 0; pind < card->mpa_rx.pkt_cnt; pind++) {
+			u32 *len_arr = card->mpa_rx.len_arr;
+
+			/* get curr PKT len & type */
+			pkt_len = le16_to_cpu(*(__le16 *) &curr_ptr[0]);
+			pkt_type = le16_to_cpu(*(__le16 *) &curr_ptr[2]);
+
+			/* copy pkt to deaggr buf */
+			skb_deaggr = mwifiex_alloc_dma_align_buf(len_arr[pind],
+								 GFP_KERNEL |
+								 GFP_DMA);
+			if (!skb_deaggr) {
+				dev_err(adapter->dev, "skb allocation failure drop pkt len=%d type=%d\n",
+					pkt_len, pkt_type);
+				curr_ptr += len_arr[pind];
+				continue;
+			}
+
+			skb_put(skb_deaggr, len_arr[pind]);
+
+			if ((pkt_type == MWIFIEX_TYPE_DATA ||
+			     (pkt_type == MWIFIEX_TYPE_AGGR_DATA &&
+			      adapter->sdio_rx_aggr_enable)) &&
+			    (pkt_len <= len_arr[pind])) {
+
+				memcpy(skb_deaggr->data, curr_ptr, pkt_len);
+
+				skb_trim(skb_deaggr, pkt_len);
+
+				/* Process de-aggr packet */
+				mwifiex_decode_rx_packet(adapter, skb_deaggr,
+							 pkt_type);
+			} else {
+				dev_err(adapter->dev, " drop wrong aggr pkt:\t"
+					"sdio_single_port_rx_aggr=%d\t"
+					"type=%d len=%d max_len=%d\n",
+					adapter->sdio_rx_aggr_enable,
+					pkt_type, pkt_len,
+					len_arr[pind]);
+				dev_kfree_skb_any(skb_deaggr);
+			}
+			curr_ptr += len_arr[pind];
+		}
+		MP_RX_AGGR_BUF_RESET(card);
+	}
+
+rx_curr_single:
+	if (f_do_rx_cur) {
+		dev_dbg(adapter->dev, "info: RX: port: %d, rx_len: %d\n",
+			port, rx_len);
+
+		skb = mwifiex_alloc_dma_align_buf(rx_len, GFP_KERNEL | GFP_DMA);
+		if (!skb) {
+			dev_err(adapter->dev, "single skb allocated fail,\t"
+				"drop pkt port=%d len=%d\n", port, rx_len);
+			if (mwifiex_sdio_card_to_host(adapter, &pkt_type,
+						      card->mpa_rx.buf, rx_len,
+						      adapter->ioport + port))
+				goto error;
+			return 0;
+		}
+
+		skb_put(skb, rx_len);
+
+		if (mwifiex_sdio_card_to_host(adapter, &pkt_type,
+					      skb->data, skb->len,
+					      adapter->ioport + port))
+			goto error;
+		if (!adapter->sdio_rx_aggr_enable &&
+		    pkt_type == MWIFIEX_TYPE_AGGR_DATA) {
+			dev_err(adapter->dev, "drop wrong pkt type %d\t"
+				"current SDIO RX Aggr not enabled\n",
+				pkt_type);
+			dev_kfree_skb_any(skb);
+			return 0;
+		}
+
+		mwifiex_decode_rx_packet(adapter, skb, pkt_type);
+	}
+	if (f_post_aggr_cur) {
+		dev_dbg(adapter->dev, "info: current packet aggregation\n");
+		/* Curr pkt can be aggregated */
+		mp_rx_aggr_setup(card, rx_len, port);
+	}
+
+	return 0;
+error:
+	if (MP_RX_AGGR_IN_PROGRESS(card))
+		MP_RX_AGGR_BUF_RESET(card);
+
+	if (f_do_rx_cur && skb)
+		/* Single transfer pending. Free curr buff also */
+		dev_kfree_skb_any(skb);
+
+	return -1;
+}
+
+/*
+ * This function checks the current interrupt status.
+ *
+ * The following interrupts are checked and handled by this function -
+ *      - Data sent
+ *      - Command sent
+ *      - Packets received
+ *
+ * Since the firmware does not generate download ready interrupt if the
+ * port updated is command port only, command sent interrupt checking
+ * should be done manually, and for every SDIO interrupt.
+ *
+ * In case of Rx packets received, the packets are uploaded from card to
+ * host and processed accordingly.
+ */
+static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
+	int ret = 0;
+	u8 sdio_ireg;
+	struct sk_buff *skb;
+	u8 port = CTRL_PORT;
+	u32 len_reg_l, len_reg_u;
+	u32 rx_blocks;
+	u16 rx_len;
+	unsigned long flags;
+	u32 bitmap;
+	u8 cr;
+
+	spin_lock_irqsave(&adapter->int_lock, flags);
+	sdio_ireg = adapter->int_status;
+	adapter->int_status = 0;
+	spin_unlock_irqrestore(&adapter->int_lock, flags);
+
+	if (!sdio_ireg)
+		return ret;
+
+	/* Following interrupt is only for SDIO new mode */
+	if (sdio_ireg & DN_LD_CMD_PORT_HOST_INT_STATUS && adapter->cmd_sent)
+		adapter->cmd_sent = false;
+
+	/* Following interrupt is only for SDIO new mode */
+	if (sdio_ireg & UP_LD_CMD_PORT_HOST_INT_STATUS) {
+		u32 pkt_type;
+
+		/* read the len of control packet */
+		rx_len = card->mp_regs[reg->cmd_rd_len_1] << 8;
+		rx_len |= (u16)card->mp_regs[reg->cmd_rd_len_0];
+		rx_blocks = DIV_ROUND_UP(rx_len, MWIFIEX_SDIO_BLOCK_SIZE);
+		if (rx_len <= INTF_HEADER_LEN ||
+		    (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE) >
+		     MWIFIEX_RX_DATA_BUF_SIZE)
+			return -1;
+		rx_len = (u16) (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE);
+		dev_dbg(adapter->dev, "info: rx_len = %d\n", rx_len);
+
+		skb = mwifiex_alloc_dma_align_buf(rx_len, GFP_KERNEL | GFP_DMA);
+		if (!skb)
+			return -1;
+
+		skb_put(skb, rx_len);
+
+		if (mwifiex_sdio_card_to_host(adapter, &pkt_type, skb->data,
+					      skb->len, adapter->ioport |
+							CMD_PORT_SLCT)) {
+			dev_err(adapter->dev,
+				"%s: failed to card_to_host", __func__);
+			dev_kfree_skb_any(skb);
+			goto term_cmd;
+		}
+
+		if ((pkt_type != MWIFIEX_TYPE_CMD) &&
+		    (pkt_type != MWIFIEX_TYPE_EVENT))
+			dev_err(adapter->dev,
+				"%s:Received wrong packet on cmd port",
+				__func__);
+
+		mwifiex_decode_rx_packet(adapter, skb, pkt_type);
+	}
+
+	if (sdio_ireg & DN_LD_HOST_INT_STATUS) {
+		bitmap = (u32) card->mp_regs[reg->wr_bitmap_l];
+		bitmap |= ((u32) card->mp_regs[reg->wr_bitmap_u]) << 8;
+		if (card->supports_sdio_new_mode) {
+			bitmap |=
+				((u32) card->mp_regs[reg->wr_bitmap_1l]) << 16;
+			bitmap |=
+				((u32) card->mp_regs[reg->wr_bitmap_1u]) << 24;
+		}
+		card->mp_wr_bitmap = bitmap;
+
+		dev_dbg(adapter->dev, "int: DNLD: wr_bitmap=0x%x\n",
+			card->mp_wr_bitmap);
+		if (adapter->data_sent &&
+		    (card->mp_wr_bitmap & card->mp_data_port_mask)) {
+			dev_dbg(adapter->dev,
+				"info:  <--- Tx DONE Interrupt --->\n");
+			adapter->data_sent = false;
+		}
+	}
+
+	/* As firmware will not generate download ready interrupt if the port
+	   updated is command port only, cmd_sent should be done for any SDIO
+	   interrupt. */
+	if (card->has_control_mask && adapter->cmd_sent) {
+		/* Check if firmware has attach buffer at command port and
+		   update just that in wr_bit_map. */
+		card->mp_wr_bitmap |=
+			(u32) card->mp_regs[reg->wr_bitmap_l] & CTRL_PORT_MASK;
+		if (card->mp_wr_bitmap & CTRL_PORT_MASK)
+			adapter->cmd_sent = false;
+	}
+
+	dev_dbg(adapter->dev, "info: cmd_sent=%d data_sent=%d\n",
+		adapter->cmd_sent, adapter->data_sent);
+	if (sdio_ireg & UP_LD_HOST_INT_STATUS) {
+		bitmap = (u32) card->mp_regs[reg->rd_bitmap_l];
+		bitmap |= ((u32) card->mp_regs[reg->rd_bitmap_u]) << 8;
+		if (card->supports_sdio_new_mode) {
+			bitmap |=
+				((u32) card->mp_regs[reg->rd_bitmap_1l]) << 16;
+			bitmap |=
+				((u32) card->mp_regs[reg->rd_bitmap_1u]) << 24;
+		}
+		card->mp_rd_bitmap = bitmap;
+		dev_dbg(adapter->dev, "int: UPLD: rd_bitmap=0x%x\n",
+			card->mp_rd_bitmap);
+
+		while (true) {
+			ret = mwifiex_get_rd_port(adapter, &port);
+			if (ret) {
+				dev_dbg(adapter->dev,
+					"info: no more rd_port available\n");
+				break;
+			}
+			len_reg_l = reg->rd_len_p0_l + (port << 1);
+			len_reg_u = reg->rd_len_p0_u + (port << 1);
+			rx_len = ((u16) card->mp_regs[len_reg_u]) << 8;
+			rx_len |= (u16) card->mp_regs[len_reg_l];
+			dev_dbg(adapter->dev, "info: RX: port=%d rx_len=%u\n",
+				port, rx_len);
+			rx_blocks =
+				(rx_len + MWIFIEX_SDIO_BLOCK_SIZE -
+				 1) / MWIFIEX_SDIO_BLOCK_SIZE;
+			if (rx_len <= INTF_HEADER_LEN ||
+			    (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE) >
+			     card->mpa_rx.buf_size) {
+				dev_err(adapter->dev, "invalid rx_len=%d\n",
+					rx_len);
+				return -1;
+			}
+
+			rx_len = (u16) (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE);
+			dev_dbg(adapter->dev, "info: rx_len = %d\n", rx_len);
+
+			if (mwifiex_sdio_card_to_host_mp_aggr(adapter, rx_len,
+							      port)) {
+				dev_err(adapter->dev, "card_to_host_mpa failed:"
+					" int status=%#x\n", sdio_ireg);
+				goto term_cmd;
+			}
+		}
+	}
+
+	return 0;
+
+term_cmd:
+	/* terminate cmd */
+	if (mwifiex_read_reg(adapter, CONFIGURATION_REG, &cr))
+		dev_err(adapter->dev, "read CFG reg failed\n");
+	else
+		dev_dbg(adapter->dev, "info: CFG reg val = %d\n", cr);
+
+	if (mwifiex_write_reg(adapter, CONFIGURATION_REG, (cr | 0x04)))
+		dev_err(adapter->dev, "write CFG reg failed\n");
+	else
+		dev_dbg(adapter->dev, "info: write success\n");
+
+	if (mwifiex_read_reg(adapter, CONFIGURATION_REG, &cr))
+		dev_err(adapter->dev, "read CFG reg failed\n");
+	else
+		dev_dbg(adapter->dev, "info: CFG reg val =%x\n", cr);
+
+	return -1;
+}
+
+/*
+ * This function aggregates transmission buffers in driver and downloads
+ * the aggregated packet to card.
+ *
+ * The individual packets are aggregated by copying into an aggregation
+ * buffer and then downloaded to the card. Previous unsent packets in the
+ * aggregation buffer are pre-copied first before new packets are added.
+ * Aggregation is done till there is space left in the aggregation buffer,
+ * or till new packets are available.
+ *
+ * The function will only download the packet to the card when aggregation
+ * stops, otherwise it will just aggregate the packet in aggregation buffer
+ * and return.
+ */
+static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
+					u8 *payload, u32 pkt_len, u32 port,
+					u32 next_pkt_len)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	int ret = 0;
+	s32 f_send_aggr_buf = 0;
+	s32 f_send_cur_buf = 0;
+	s32 f_precopy_cur_buf = 0;
+	s32 f_postcopy_cur_buf = 0;
+	u32 mport;
+
+	if (!card->mpa_tx.enabled ||
+	    (card->has_control_mask && (port == CTRL_PORT)) ||
+	    (card->supports_sdio_new_mode && (port == CMD_PORT_SLCT))) {
+		dev_dbg(adapter->dev, "info: %s: tx aggregation disabled\n",
+			__func__);
+
+		f_send_cur_buf = 1;
+		goto tx_curr_single;
+	}
+
+	if (next_pkt_len) {
+		/* More pkt in TX queue */
+		dev_dbg(adapter->dev, "info: %s: more packets in queue.\n",
+			__func__);
+
+		if (MP_TX_AGGR_IN_PROGRESS(card)) {
+			if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) {
+				f_precopy_cur_buf = 1;
+
+				if (!(card->mp_wr_bitmap &
+				      (1 << card->curr_wr_port)) ||
+				    !MP_TX_AGGR_BUF_HAS_ROOM(
+					    card, pkt_len + next_pkt_len))
+					f_send_aggr_buf = 1;
+			} else {
+				/* No room in Aggr buf, send it */
+				f_send_aggr_buf = 1;
+
+				if (!(card->mp_wr_bitmap &
+				      (1 << card->curr_wr_port)))
+					f_send_cur_buf = 1;
+				else
+					f_postcopy_cur_buf = 1;
+			}
+		} else {
+			if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len) &&
+			    (card->mp_wr_bitmap & (1 << card->curr_wr_port)))
+				f_precopy_cur_buf = 1;
+			else
+				f_send_cur_buf = 1;
+		}
+	} else {
+		/* Last pkt in TX queue */
+		dev_dbg(adapter->dev, "info: %s: Last packet in Tx Queue.\n",
+			__func__);
+
+		if (MP_TX_AGGR_IN_PROGRESS(card)) {
+			/* some packs in Aggr buf already */
+			f_send_aggr_buf = 1;
+
+			if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len))
+				f_precopy_cur_buf = 1;
+			else
+				/* No room in Aggr buf, send it */
+				f_send_cur_buf = 1;
+		} else {
+			f_send_cur_buf = 1;
+		}
+	}
+
+	if (f_precopy_cur_buf) {
+		dev_dbg(adapter->dev, "data: %s: precopy current buffer\n",
+			__func__);
+		MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port);
+
+		if (MP_TX_AGGR_PKT_LIMIT_REACHED(card) ||
+		    mp_tx_aggr_port_limit_reached(card))
+			/* No more pkts allowed in Aggr buf, send it */
+			f_send_aggr_buf = 1;
+	}
+
+	if (f_send_aggr_buf) {
+		dev_dbg(adapter->dev, "data: %s: send aggr buffer: %d %d\n",
+			__func__,
+				card->mpa_tx.start_port, card->mpa_tx.ports);
+		if (card->supports_sdio_new_mode) {
+			u32 port_count;
+			int i;
+
+			for (i = 0, port_count = 0; i < card->max_ports; i++)
+				if (card->mpa_tx.ports & BIT(i))
+					port_count++;
+
+			/* Writing data from "start_port + 0" to "start_port +
+			 * port_count -1", so decrease the count by 1
+			 */
+			port_count--;
+			mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+				 (port_count << 8)) + card->mpa_tx.start_port;
+		} else {
+			mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+				 (card->mpa_tx.ports << 4)) +
+				 card->mpa_tx.start_port;
+		}
+
+		ret = mwifiex_write_data_to_card(adapter, card->mpa_tx.buf,
+						 card->mpa_tx.buf_len, mport);
+
+		MP_TX_AGGR_BUF_RESET(card);
+	}
+
+tx_curr_single:
+	if (f_send_cur_buf) {
+		dev_dbg(adapter->dev, "data: %s: send current buffer %d\n",
+			__func__, port);
+		ret = mwifiex_write_data_to_card(adapter, payload, pkt_len,
+						 adapter->ioport + port);
+	}
+
+	if (f_postcopy_cur_buf) {
+		dev_dbg(adapter->dev, "data: %s: postcopy current buffer\n",
+			__func__);
+		MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port);
+	}
+
+	return ret;
+}
+
+/*
+ * This function downloads data from driver to card.
+ *
+ * Both commands and data packets are transferred to the card by this
+ * function.
+ *
+ * This function adds the SDIO specific header to the front of the buffer
+ * before transferring. The header contains the length of the packet and
+ * the type. The firmware handles the packets based upon this set type.
+ */
+static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter,
+				     u8 type, struct sk_buff *skb,
+				     struct mwifiex_tx_param *tx_param)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	int ret;
+	u32 buf_block_len;
+	u32 blk_size;
+	u32 port = CTRL_PORT;
+	u8 *payload = (u8 *)skb->data;
+	u32 pkt_len = skb->len;
+
+	/* Allocate buffer and copy payload */
+	blk_size = MWIFIEX_SDIO_BLOCK_SIZE;
+	buf_block_len = (pkt_len + blk_size - 1) / blk_size;
+	*(__le16 *)&payload[0] = cpu_to_le16((u16)pkt_len);
+	*(__le16 *)&payload[2] = cpu_to_le16(type);
+
+	/*
+	 * This is SDIO specific header
+	 *  u16 length,
+	 *  u16 type (MWIFIEX_TYPE_DATA = 0, MWIFIEX_TYPE_CMD = 1,
+	 *  MWIFIEX_TYPE_EVENT = 3)
+	 */
+	if (type == MWIFIEX_TYPE_DATA) {
+		ret = mwifiex_get_wr_port_data(adapter, &port);
+		if (ret) {
+			dev_err(adapter->dev, "%s: no wr_port available\n",
+				__func__);
+			return ret;
+		}
+	} else {
+		adapter->cmd_sent = true;
+		/* Type must be MWIFIEX_TYPE_CMD */
+
+		if (pkt_len <= INTF_HEADER_LEN ||
+		    pkt_len > MWIFIEX_UPLD_SIZE)
+			dev_err(adapter->dev, "%s: payload=%p, nb=%d\n",
+				__func__, payload, pkt_len);
+
+		if (card->supports_sdio_new_mode)
+			port = CMD_PORT_SLCT;
+	}
+
+	/* Transfer data to card */
+	pkt_len = buf_block_len * blk_size;
+
+	if (tx_param)
+		ret = mwifiex_host_to_card_mp_aggr(adapter, payload, pkt_len,
+						   port, tx_param->next_pkt_len
+						   );
+	else
+		ret = mwifiex_host_to_card_mp_aggr(adapter, payload, pkt_len,
+						   port, 0);
+
+	if (ret) {
+		if (type == MWIFIEX_TYPE_CMD)
+			adapter->cmd_sent = false;
+		if (type == MWIFIEX_TYPE_DATA) {
+			adapter->data_sent = false;
+			/* restore curr_wr_port in error cases */
+			card->curr_wr_port = port;
+			card->mp_wr_bitmap |= (u32)(1 << card->curr_wr_port);
+		}
+	} else {
+		if (type == MWIFIEX_TYPE_DATA) {
+			if (!(card->mp_wr_bitmap & (1 << card->curr_wr_port)))
+				adapter->data_sent = true;
+			else
+				adapter->data_sent = false;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * This function allocates the MPA Tx and Rx buffers.
+ */
+static int mwifiex_alloc_sdio_mpa_buffers(struct mwifiex_adapter *adapter,
+				   u32 mpa_tx_buf_size, u32 mpa_rx_buf_size)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	u32 rx_buf_size;
+	int ret = 0;
+
+	card->mpa_tx.buf = kzalloc(mpa_tx_buf_size, GFP_KERNEL);
+	if (!card->mpa_tx.buf) {
+		ret = -1;
+		goto error;
+	}
+
+	card->mpa_tx.buf_size = mpa_tx_buf_size;
+
+	rx_buf_size = max_t(u32, mpa_rx_buf_size,
+			    (u32)SDIO_MAX_AGGR_BUF_SIZE);
+	card->mpa_rx.buf = kzalloc(rx_buf_size, GFP_KERNEL);
+	if (!card->mpa_rx.buf) {
+		ret = -1;
+		goto error;
+	}
+
+	card->mpa_rx.buf_size = rx_buf_size;
+
+error:
+	if (ret) {
+		kfree(card->mpa_tx.buf);
+		kfree(card->mpa_rx.buf);
+	}
+
+	return ret;
+}
+
+/*
+ * This function unregisters the SDIO device.
+ *
+ * The SDIO IRQ is released, the function is disabled and driver
+ * data is set to null.
+ */
+static void
+mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+
+	if (adapter->card) {
+		sdio_claim_host(card->func);
+		sdio_disable_func(card->func);
+		sdio_release_host(card->func);
+	}
+}
+
+/*
+ * This function registers the SDIO device.
+ *
+ * SDIO IRQ is claimed, block size is set and driver data is initialized.
+ */
+static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
+{
+	int ret;
+	struct sdio_mmc_card *card = adapter->card;
+	struct sdio_func *func = card->func;
+
+	/* save adapter pointer in card */
+	card->adapter = adapter;
+	adapter->tx_buf_size = card->tx_buf_size;
+
+	sdio_claim_host(func);
+
+	/* Set block size */
+	ret = sdio_set_block_size(card->func, MWIFIEX_SDIO_BLOCK_SIZE);
+	sdio_release_host(func);
+	if (ret) {
+		pr_err("cannot set SDIO block size\n");
+		return ret;
+	}
+
+
+	adapter->dev = &func->dev;
+
+	strcpy(adapter->fw_name, card->firmware);
+	adapter->mem_type_mapping_tbl = mem_type_mapping_tbl;
+	adapter->num_mem_types = ARRAY_SIZE(mem_type_mapping_tbl);
+
+	return 0;
+}
+
+/*
+ * This function initializes the SDIO driver.
+ *
+ * The following initializations steps are followed -
+ *      - Read the Host interrupt status register to acknowledge
+ *        the first interrupt got from bootloader
+ *      - Disable host interrupt mask register
+ *      - Get SDIO port
+ *      - Initialize SDIO variables in card
+ *      - Allocate MP registers
+ *      - Allocate MPA Tx and Rx buffers
+ */
+static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
+	int ret;
+	u8 sdio_ireg;
+
+	sdio_set_drvdata(card->func, card);
+
+	/*
+	 * Read the host_int_status_reg for ACK the first interrupt got
+	 * from the bootloader. If we don't do this we get a interrupt
+	 * as soon as we register the irq.
+	 */
+	mwifiex_read_reg(adapter, card->reg->host_int_status_reg, &sdio_ireg);
+
+	/* Get SDIO ioport */
+	mwifiex_init_sdio_ioport(adapter);
+
+	/* Initialize SDIO variables in card */
+	card->mp_rd_bitmap = 0;
+	card->mp_wr_bitmap = 0;
+	card->curr_rd_port = reg->start_rd_port;
+	card->curr_wr_port = reg->start_wr_port;
+
+	card->mp_data_port_mask = reg->data_port_mask;
+
+	card->mpa_tx.buf_len = 0;
+	card->mpa_tx.pkt_cnt = 0;
+	card->mpa_tx.start_port = 0;
+
+	card->mpa_tx.enabled = 1;
+	card->mpa_tx.pkt_aggr_limit = card->mp_agg_pkt_limit;
+
+	card->mpa_rx.buf_len = 0;
+	card->mpa_rx.pkt_cnt = 0;
+	card->mpa_rx.start_port = 0;
+
+	card->mpa_rx.enabled = 1;
+	card->mpa_rx.pkt_aggr_limit = card->mp_agg_pkt_limit;
+
+	/* Allocate buffers for SDIO MP-A */
+	card->mp_regs = kzalloc(reg->max_mp_regs, GFP_KERNEL);
+	if (!card->mp_regs)
+		return -ENOMEM;
+
+	/* Allocate skb pointer buffers */
+	card->mpa_rx.skb_arr = kzalloc((sizeof(void *)) *
+				       card->mp_agg_pkt_limit, GFP_KERNEL);
+	card->mpa_rx.len_arr = kzalloc(sizeof(*card->mpa_rx.len_arr) *
+				       card->mp_agg_pkt_limit, GFP_KERNEL);
+	ret = mwifiex_alloc_sdio_mpa_buffers(adapter,
+					     card->mp_tx_agg_buf_size,
+					     card->mp_rx_agg_buf_size);
+	if (ret) {
+		dev_err(adapter->dev, "failed to alloc sdio mp-a buffers\n");
+		kfree(card->mp_regs);
+		return -1;
+	}
+
+	adapter->auto_tdls = card->can_auto_tdls;
+	adapter->ext_scan = card->can_ext_scan;
+	return ret;
+}
+
+/*
+ * This function resets the MPA Tx and Rx buffers.
+ */
+static void mwifiex_cleanup_mpa_buf(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+
+	MP_TX_AGGR_BUF_RESET(card);
+	MP_RX_AGGR_BUF_RESET(card);
+}
+
+/*
+ * This function cleans up the allocated card buffers.
+ *
+ * The following are freed by this function -
+ *      - MP registers
+ *      - MPA Tx buffer
+ *      - MPA Rx buffer
+ */
+static void mwifiex_cleanup_sdio(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+
+	kfree(card->mp_regs);
+	kfree(card->mpa_rx.skb_arr);
+	kfree(card->mpa_rx.len_arr);
+	kfree(card->mpa_tx.buf);
+	kfree(card->mpa_rx.buf);
+	sdio_set_drvdata(card->func, NULL);
+	kfree(card);
+}
+
+/*
+ * This function updates the MP end port in card.
+ */
+static void
+mwifiex_update_mp_end_port(struct mwifiex_adapter *adapter, u16 port)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
+	int i;
+
+	card->mp_end_port = port;
+
+	card->mp_data_port_mask = reg->data_port_mask;
+
+	if (reg->start_wr_port) {
+		for (i = 1; i <= card->max_ports - card->mp_end_port; i++)
+			card->mp_data_port_mask &=
+					~(1 << (card->max_ports - i));
+	}
+
+	card->curr_wr_port = reg->start_wr_port;
+
+	dev_dbg(adapter->dev, "cmd: mp_end_port %d, data port mask 0x%x\n",
+		port, card->mp_data_port_mask);
+}
+
+static struct mwifiex_adapter *save_adapter;
+static void mwifiex_sdio_card_reset_work(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	struct mmc_host *target = card->func->card->host;
+
+	/* The actual reset operation must be run outside of driver thread.
+	 * This is because mmc_remove_host() will cause the device to be
+	 * instantly destroyed, and the driver then needs to end its thread,
+	 * leading to a deadlock.
+	 *
+	 * We run it in a totally independent workqueue.
+	 */
+
+	pr_err("Resetting card...\n");
+	mmc_remove_host(target);
+	/* 200ms delay is based on experiment with sdhci controller */
+	mdelay(200);
+	target->rescan_entered = 0; /* rescan non-removable cards */
+	mmc_add_host(target);
+}
+
+/* This function read/write firmware */
+static enum
+rdwr_status mwifiex_sdio_rdwr_firmware(struct mwifiex_adapter *adapter,
+				       u8 doneflag)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	int ret, tries;
+	u8 ctrl_data = 0;
+
+	sdio_writeb(card->func, FW_DUMP_HOST_READY, card->reg->fw_dump_ctrl,
+		    &ret);
+	if (ret) {
+		dev_err(adapter->dev, "SDIO Write ERR\n");
+		return RDWR_STATUS_FAILURE;
+	}
+	for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+		ctrl_data = sdio_readb(card->func, card->reg->fw_dump_ctrl,
+				       &ret);
+		if (ret) {
+			dev_err(adapter->dev, "SDIO read err\n");
+			return RDWR_STATUS_FAILURE;
+		}
+		if (ctrl_data == FW_DUMP_DONE)
+			break;
+		if (doneflag && ctrl_data == doneflag)
+			return RDWR_STATUS_DONE;
+		if (ctrl_data != FW_DUMP_HOST_READY) {
+			dev_info(adapter->dev,
+				 "The ctrl reg was changed, re-try again!\n");
+			sdio_writeb(card->func, FW_DUMP_HOST_READY,
+				    card->reg->fw_dump_ctrl, &ret);
+			if (ret) {
+				dev_err(adapter->dev, "SDIO write err\n");
+				return RDWR_STATUS_FAILURE;
+			}
+		}
+		usleep_range(100, 200);
+	}
+	if (ctrl_data == FW_DUMP_HOST_READY) {
+		dev_err(adapter->dev, "Fail to pull ctrl_data\n");
+		return RDWR_STATUS_FAILURE;
+	}
+
+	return RDWR_STATUS_SUCCESS;
+}
+
+/* This function dump firmware memory to file */
+static void mwifiex_sdio_fw_dump_work(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	int ret = 0;
+	unsigned int reg, reg_start, reg_end;
+	u8 *dbg_ptr, *end_ptr, dump_num, idx, i, read_reg, doneflag = 0;
+	enum rdwr_status stat;
+	u32 memory_size;
+	static char *env[] = { "DRIVER=mwifiex_sdio", "EVENT=fw_dump", NULL };
+
+	mwifiex_dump_drv_info(adapter);
+
+	if (!card->can_dump_fw)
+		return;
+
+	for (idx = 0; idx < ARRAY_SIZE(mem_type_mapping_tbl); idx++) {
+		struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
+
+		if (entry->mem_ptr) {
+			vfree(entry->mem_ptr);
+			entry->mem_ptr = NULL;
+		}
+		entry->mem_size = 0;
+	}
+
+	mwifiex_pm_wakeup_card(adapter);
+	sdio_claim_host(card->func);
+
+	dev_info(adapter->dev, "== mwifiex firmware dump start ==\n");
+
+	stat = mwifiex_sdio_rdwr_firmware(adapter, doneflag);
+	if (stat == RDWR_STATUS_FAILURE)
+		goto done;
+
+	reg = card->reg->fw_dump_start;
+	/* Read the number of the memories which will dump */
+	dump_num = sdio_readb(card->func, reg, &ret);
+	if (ret) {
+		dev_err(adapter->dev, "SDIO read memory length err\n");
+		goto done;
+	}
+
+	/* Read the length of every memory which will dump */
+	for (idx = 0; idx < dump_num; idx++) {
+		struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
+
+		stat = mwifiex_sdio_rdwr_firmware(adapter, doneflag);
+		if (stat == RDWR_STATUS_FAILURE)
+			goto done;
+
+		memory_size = 0;
+		reg = card->reg->fw_dump_start;
+		for (i = 0; i < 4; i++) {
+			read_reg = sdio_readb(card->func, reg, &ret);
+			if (ret) {
+				dev_err(adapter->dev, "SDIO read err\n");
+				goto done;
+			}
+			memory_size |= (read_reg << i*8);
+			reg++;
+		}
+
+		if (memory_size == 0) {
+			dev_info(adapter->dev, "Firmware dump Finished!\n");
+			break;
+		}
+
+		dev_info(adapter->dev,
+			 "%s_SIZE=0x%x\n", entry->mem_name, memory_size);
+		entry->mem_ptr = vmalloc(memory_size + 1);
+		entry->mem_size = memory_size;
+		if (!entry->mem_ptr) {
+			dev_err(adapter->dev, "Vmalloc %s failed\n",
+				entry->mem_name);
+			goto done;
+		}
+		dbg_ptr = entry->mem_ptr;
+		end_ptr = dbg_ptr + memory_size;
+
+		doneflag = entry->done_flag;
+		dev_info(adapter->dev, "Start %s output, please wait...\n",
+			 entry->mem_name);
+
+		do {
+			stat = mwifiex_sdio_rdwr_firmware(adapter, doneflag);
+			if (stat == RDWR_STATUS_FAILURE)
+				goto done;
+
+			reg_start = card->reg->fw_dump_start;
+			reg_end = card->reg->fw_dump_end;
+			for (reg = reg_start; reg <= reg_end; reg++) {
+				*dbg_ptr = sdio_readb(card->func, reg, &ret);
+				if (ret) {
+					dev_err(adapter->dev,
+						"SDIO read err\n");
+					goto done;
+				}
+				if (dbg_ptr < end_ptr)
+					dbg_ptr++;
+				else
+					dev_err(adapter->dev,
+						"Allocated buf not enough\n");
+			}
+
+			if (stat != RDWR_STATUS_DONE)
+				continue;
+
+			dev_info(adapter->dev, "%s done: size=0x%tx\n",
+				 entry->mem_name, dbg_ptr - entry->mem_ptr);
+			break;
+		} while (1);
+	}
+	dev_info(adapter->dev, "== mwifiex firmware dump end ==\n");
+
+	kobject_uevent_env(&adapter->wiphy->dev.kobj, KOBJ_CHANGE, env);
+
+done:
+	sdio_release_host(card->func);
+	adapter->curr_mem_idx = 0;
+}
+
+static void mwifiex_sdio_work(struct work_struct *work)
+{
+	if (test_and_clear_bit(MWIFIEX_IFACE_WORK_FW_DUMP,
+			       &iface_work_flags))
+		mwifiex_sdio_fw_dump_work(save_adapter);
+	if (test_and_clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET,
+			       &iface_work_flags))
+		mwifiex_sdio_card_reset_work(save_adapter);
+}
+
+static DECLARE_WORK(sdio_work, mwifiex_sdio_work);
+/* This function resets the card */
+static void mwifiex_sdio_card_reset(struct mwifiex_adapter *adapter)
+{
+	save_adapter = adapter;
+	if (test_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &iface_work_flags))
+		return;
+
+	set_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &iface_work_flags);
+
+	schedule_work(&sdio_work);
+}
+
+/* This function dumps FW information */
+static void mwifiex_sdio_fw_dump(struct mwifiex_adapter *adapter)
+{
+	save_adapter = adapter;
+	if (test_bit(MWIFIEX_IFACE_WORK_FW_DUMP, &iface_work_flags))
+		return;
+
+	set_bit(MWIFIEX_IFACE_WORK_FW_DUMP, &iface_work_flags);
+	schedule_work(&sdio_work);
+}
+
+/* Function to dump SDIO function registers and SDIO scratch registers in case
+ * of FW crash
+ */
+static int
+mwifiex_sdio_reg_dump(struct mwifiex_adapter *adapter, char *drv_buf)
+{
+	char *p = drv_buf;
+	struct sdio_mmc_card *cardp = adapter->card;
+	int ret = 0;
+	u8 count, func, data, index = 0, size = 0;
+	u8 reg, reg_start, reg_end;
+	char buf[256], *ptr;
+
+	if (!p)
+		return 0;
+
+	dev_info(adapter->dev, "SDIO register DUMP START\n");
+
+	mwifiex_pm_wakeup_card(adapter);
+
+	sdio_claim_host(cardp->func);
+
+	for (count = 0; count < 5; count++) {
+		memset(buf, 0, sizeof(buf));
+		ptr = buf;
+
+		switch (count) {
+		case 0:
+			/* Read the registers of SDIO function0 */
+			func = count;
+			reg_start = 0;
+			reg_end = 9;
+			break;
+		case 1:
+			/* Read the registers of SDIO function1 */
+			func = count;
+			reg_start = cardp->reg->func1_dump_reg_start;
+			reg_end = cardp->reg->func1_dump_reg_end;
+			break;
+		case 2:
+			index = 0;
+			func = 1;
+			reg_start = cardp->reg->func1_spec_reg_table[index++];
+			size = cardp->reg->func1_spec_reg_num;
+			reg_end = cardp->reg->func1_spec_reg_table[size-1];
+			break;
+		default:
+			/* Read the scratch registers of SDIO function1 */
+			if (count == 4)
+				mdelay(100);
+			func = 1;
+			reg_start = cardp->reg->func1_scratch_reg;
+			reg_end = reg_start + MWIFIEX_SDIO_SCRATCH_SIZE;
+		}
+
+		if (count != 2)
+			ptr += sprintf(ptr, "SDIO Func%d (%#x-%#x): ",
+				       func, reg_start, reg_end);
+		else
+			ptr += sprintf(ptr, "SDIO Func%d: ", func);
+
+		for (reg = reg_start; reg <= reg_end;) {
+			if (func == 0)
+				data = sdio_f0_readb(cardp->func, reg, &ret);
+			else
+				data = sdio_readb(cardp->func, reg, &ret);
+
+			if (count == 2)
+				ptr += sprintf(ptr, "(%#x) ", reg);
+			if (!ret) {
+				ptr += sprintf(ptr, "%02x ", data);
+			} else {
+				ptr += sprintf(ptr, "ERR");
+				break;
+			}
+
+			if (count == 2 && reg < reg_end)
+				reg = cardp->reg->func1_spec_reg_table[index++];
+			else
+				reg++;
+		}
+
+		dev_info(adapter->dev, "%s\n", buf);
+		p += sprintf(p, "%s\n", buf);
+	}
+
+	sdio_release_host(cardp->func);
+
+	dev_info(adapter->dev, "SDIO register DUMP END\n");
+
+	return p - drv_buf;
+}
+
+static struct mwifiex_if_ops sdio_ops = {
+	.init_if = mwifiex_init_sdio,
+	.cleanup_if = mwifiex_cleanup_sdio,
+	.check_fw_status = mwifiex_check_fw_status,
+	.prog_fw = mwifiex_prog_fw_w_helper,
+	.register_dev = mwifiex_register_dev,
+	.unregister_dev = mwifiex_unregister_dev,
+	.enable_int = mwifiex_sdio_enable_host_int,
+	.disable_int = mwifiex_sdio_disable_host_int,
+	.process_int_status = mwifiex_process_int_status,
+	.host_to_card = mwifiex_sdio_host_to_card,
+	.wakeup = mwifiex_pm_wakeup_card,
+	.wakeup_complete = mwifiex_pm_wakeup_card_complete,
+
+	/* SDIO specific */
+	.update_mp_end_port = mwifiex_update_mp_end_port,
+	.cleanup_mpa_buf = mwifiex_cleanup_mpa_buf,
+	.cmdrsp_complete = mwifiex_sdio_cmdrsp_complete,
+	.event_complete = mwifiex_sdio_event_complete,
+	.card_reset = mwifiex_sdio_card_reset,
+	.fw_dump = mwifiex_sdio_fw_dump,
+	.reg_dump = mwifiex_sdio_reg_dump,
+	.deaggr_pkt = mwifiex_deaggr_sdio_pkt,
+};
+
+/*
+ * This function initializes the SDIO driver.
+ *
+ * This initiates the semaphore and registers the device with
+ * SDIO bus.
+ */
+static int
+mwifiex_sdio_init_module(void)
+{
+	sema_init(&add_remove_card_sem, 1);
+
+	/* Clear the flag in case user removes the card. */
+	user_rmmod = 0;
+
+	return sdio_register_driver(&mwifiex_sdio);
+}
+
+/*
+ * This function cleans up the SDIO driver.
+ *
+ * The following major steps are followed for cleanup -
+ *      - Resume the device if its suspended
+ *      - Disconnect the device if connected
+ *      - Shutdown the firmware
+ *      - Unregister the device from SDIO bus.
+ */
+static void
+mwifiex_sdio_cleanup_module(void)
+{
+	if (!down_interruptible(&add_remove_card_sem))
+		up(&add_remove_card_sem);
+
+	/* Set the flag as user is removing this module. */
+	user_rmmod = 1;
+	cancel_work_sync(&sdio_work);
+
+	sdio_unregister_driver(&mwifiex_sdio);
+}
+
+module_init(mwifiex_sdio_init_module);
+module_exit(mwifiex_sdio_cleanup_module);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell WiFi-Ex SDIO Driver version " SDIO_VERSION);
+MODULE_VERSION(SDIO_VERSION);
+MODULE_LICENSE("GPL v2");
+/*(DEBLOBBED)*/