Initial import

1 files changed, 71 insertions, 0 deletions

diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
new file mode 100644
index 000000000..e5b8e5e84
--- /dev/null
+++ b/drivers/net/wireless/p54/Kconfig
@@ -0,0 +1,71 @@
+config P54_COMMON
+	tristate "Softmac Prism54 support"
+	depends on MAC80211
+	select FW_LOADER
+	select CRC_CCITT
+	---help---
+	  This is common code for isl38xx/stlc45xx based modules.
+	  This module does nothing by itself - the USB/PCI/SPI front-ends
+	  also need to be enabled in order to support any devices.
+
+	  These devices require softmac firmware which can be found at
+	  <http://wireless.kernel.org/en/users/Drivers/p54>
+
+	  If you choose to build a module, it'll be called p54common.
+
+config P54_USB
+	tristate "Prism54 USB support"
+	depends on P54_COMMON && USB
+	select CRC32
+	---help---
+	  This driver is for USB isl38xx based wireless cards.
+
+	  These devices require softmac firmware which can be found at
+	  <http://wireless.kernel.org/en/users/Drivers/p54>
+
+	  If you choose to build a module, it'll be called p54usb.
+
+config P54_PCI
+	tristate "Prism54 PCI support"
+	depends on P54_COMMON && PCI
+	---help---
+	  This driver is for PCI isl38xx based wireless cards.
+	  This driver supports most devices that are supported by the
+	  fullmac prism54 driver plus many devices which are not
+	  supported by the fullmac driver/firmware.
+
+	  This driver requires softmac firmware which can be found at
+	  <http://wireless.kernel.org/en/users/Drivers/p54>
+
+	  If you choose to build a module, it'll be called p54pci.
+
+config P54_SPI
+	tristate "Prism54 SPI (stlc45xx) support"
+	depends on P54_COMMON && SPI_MASTER
+	---help---
+	  This driver is for stlc4550 or stlc4560 based wireless chips
+	  such as Nokia's N800/N810 Portable Internet Tablet.
+
+	  If you choose to build a module, it'll be called p54spi.
+
+config P54_SPI_DEFAULT_EEPROM
+	bool "Include fallback EEPROM blob"
+	depends on P54_SPI
+	default n
+	---help---
+	 Unlike the PCI or USB devices, the SPI variants don't have
+	 a dedicated EEPROM chip to store all device specific values
+	 for calibration, country and interface settings.
+
+	 The driver will try to load the image "DEBLOBBED", if the
+	 file is put at the right place. (usually /lib/firmware.)
+
+	 Only if this request fails, this option will provide a
+	 backup set of generic values to get the device working.
+
+	 Enabling this option adds about 4k to p54spi.
+
+config P54_LEDS
+	bool
+	depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON)
+	default y