Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 0 insertions, 245 deletions

diff --git a/drivers/net/wireless/rtl818x/rtl8187/leds.c b/drivers/net/wireless/rtl818x/rtl8187/leds.c
deleted file mode 100644
index c2d5b495c..000000000
--- a/drivers/net/wireless/rtl818x/rtl8187/leds.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Linux LED driver for RTL8187
- *
- * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
- *
- * Based on the LED handling in the r8187 driver, which is:
- * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
- *
- * Thanks to Realtek for their support!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifdef CONFIG_RTL8187_LEDS
-
-#include <net/mac80211.h>
-#include <linux/usb.h>
-#include <linux/eeprom_93cx6.h>
-
-#include "rtl8187.h"
-#include "leds.h"
-
-static void led_turn_on(struct work_struct *work)
-{
-	/* As this routine does read/write operations on the hardware, it must
-	 * be run from a work queue.
-	 */
-	u8 reg;
-	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
-				    led_on.work);
-	struct rtl8187_led *led = &priv->led_tx;
-
-	/* Don't change the LED, when the device is down. */
-	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
-		return ;
-
-	/* Skip if the LED is not registered. */
-	if (!led->dev)
-		return;
-	mutex_lock(&priv->conf_mutex);
-	switch (led->ledpin) {
-	case LED_PIN_GPIO0:
-		rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
-		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00);
-		break;
-	case LED_PIN_LED0:
-		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4);
-		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-		break;
-	case LED_PIN_LED1:
-		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5);
-		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-		break;
-	case LED_PIN_HW:
-	default:
-		break;
-	}
-	mutex_unlock(&priv->conf_mutex);
-}
-
-static void led_turn_off(struct work_struct *work)
-{
-	/* As this routine does read/write operations on the hardware, it must
-	 * be run from a work queue.
-	 */
-	u8 reg;
-	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
-				    led_off.work);
-	struct rtl8187_led *led = &priv->led_tx;
-
-	/* Don't change the LED, when the device is down. */
-	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
-		return ;
-
-	/* Skip if the LED is not registered. */
-	if (!led->dev)
-		return;
-	mutex_lock(&priv->conf_mutex);
-	switch (led->ledpin) {
-	case LED_PIN_GPIO0:
-		rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
-		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01);
-		break;
-	case LED_PIN_LED0:
-		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4);
-		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-		break;
-	case LED_PIN_LED1:
-		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5);
-		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-		break;
-	case LED_PIN_HW:
-	default:
-		break;
-	}
-	mutex_unlock(&priv->conf_mutex);
-}
-
-/* Callback from the LED subsystem. */
-static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
-				   enum led_brightness brightness)
-{
-	struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led,
-					       led_dev);
-	struct ieee80211_hw *hw = led->dev;
-	struct rtl8187_priv *priv;
-	static bool radio_on;
-
-	if (!hw)
-		return;
-	priv = hw->priv;
-	if (led->is_radio) {
-		if (brightness == LED_FULL) {
-			ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
-			radio_on = true;
-		} else if (radio_on) {
-			radio_on = false;
-			cancel_delayed_work(&priv->led_on);
-			ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
-		}
-	} else if (radio_on) {
-		if (brightness == LED_OFF) {
-			ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
-			/* The LED is off for 1/20 sec - it just blinks. */
-			ieee80211_queue_delayed_work(hw, &priv->led_on,
-						     HZ / 20);
-		} else
-			ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
-	}
-}
-
-static int rtl8187_register_led(struct ieee80211_hw *dev,
-				struct rtl8187_led *led, const char *name,
-				const char *default_trigger, u8 ledpin,
-				bool is_radio)
-{
-	int err;
-	struct rtl8187_priv *priv = dev->priv;
-
-	if (led->dev)
-		return -EEXIST;
-	if (!default_trigger)
-		return -EINVAL;
-	led->dev = dev;
-	led->ledpin = ledpin;
-	led->is_radio = is_radio;
-	strncpy(led->name, name, sizeof(led->name));
-
-	led->led_dev.name = led->name;
-	led->led_dev.default_trigger = default_trigger;
-	led->led_dev.brightness_set = rtl8187_led_brightness_set;
-
-	err = led_classdev_register(&priv->udev->dev, &led->led_dev);
-	if (err) {
-		printk(KERN_INFO "LEDs: Failed to register %s\n", name);
-		led->dev = NULL;
-		return err;
-	}
-	return 0;
-}
-
-static void rtl8187_unregister_led(struct rtl8187_led *led)
-{
-	struct ieee80211_hw *hw = led->dev;
-	struct rtl8187_priv *priv = hw->priv;
-
-	led_classdev_unregister(&led->led_dev);
-	flush_delayed_work(&priv->led_off);
-	led->dev = NULL;
-}
-
-void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	char name[RTL8187_LED_MAX_NAME_LEN + 1];
-	u8 ledpin;
-	int err;
-
-	/* According to the vendor driver, the LED operation depends on the
-	 * customer ID encoded in the EEPROM
-	 */
-	printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid);
-	switch (custid) {
-	case EEPROM_CID_RSVD0:
-	case EEPROM_CID_RSVD1:
-	case EEPROM_CID_SERCOMM_PS:
-	case EEPROM_CID_QMI:
-	case EEPROM_CID_DELL:
-	case EEPROM_CID_TOSHIBA:
-		ledpin = LED_PIN_GPIO0;
-		break;
-	case EEPROM_CID_ALPHA0:
-		ledpin = LED_PIN_LED0;
-		break;
-	case EEPROM_CID_HW:
-		ledpin = LED_PIN_HW;
-		break;
-	default:
-		ledpin = LED_PIN_GPIO0;
-	}
-
-	INIT_DELAYED_WORK(&priv->led_on, led_turn_on);
-	INIT_DELAYED_WORK(&priv->led_off, led_turn_off);
-
-	snprintf(name, sizeof(name),
-		 "rtl8187-%s::radio", wiphy_name(dev->wiphy));
-	err = rtl8187_register_led(dev, &priv->led_radio, name,
-			 ieee80211_get_radio_led_name(dev), ledpin, true);
-	if (err)
-		return;
-
-	snprintf(name, sizeof(name),
-		 "rtl8187-%s::tx", wiphy_name(dev->wiphy));
-	err = rtl8187_register_led(dev, &priv->led_tx, name,
-			 ieee80211_get_tx_led_name(dev), ledpin, false);
-	if (err)
-		goto err_tx;
-
-	snprintf(name, sizeof(name),
-		 "rtl8187-%s::rx", wiphy_name(dev->wiphy));
-	err = rtl8187_register_led(dev, &priv->led_rx, name,
-			 ieee80211_get_rx_led_name(dev), ledpin, false);
-	if (!err)
-		return;
-
-	/* registration of RX LED failed - unregister */
-	rtl8187_unregister_led(&priv->led_tx);
-err_tx:
-	rtl8187_unregister_led(&priv->led_radio);
-}
-
-void rtl8187_leds_exit(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-
-	rtl8187_unregister_led(&priv->led_radio);
-	rtl8187_unregister_led(&priv->led_rx);
-	rtl8187_unregister_led(&priv->led_tx);
-	cancel_delayed_work_sync(&priv->led_off);
-	cancel_delayed_work_sync(&priv->led_on);
-}
-#endif /* def CONFIG_RTL8187_LEDS */
-