Linux-libre 4.2-gnu

6 files changed, 429 insertions, 31 deletions

diff --git a/drivers/nfc/nfcmrvl/Kconfig b/drivers/nfc/nfcmrvl/Kconfig
index 5e18afd9a..796be2411 100644
--- a/drivers/nfc/nfcmrvl/Kconfig
+++ b/drivers/nfc/nfcmrvl/Kconfig
@@ -21,3 +21,14 @@ config NFC_MRVL_USB
 
 	  Say Y here to compile support for Marvell NFC-over-USB driver
 	  into the kernel or say M to compile it as module.
+
+config NFC_MRVL_UART
+	tristate "Marvell NFC-over-UART driver"
+	depends on NFC_MRVL && NFC_NCI_UART
+	help
+	  Marvell NFC-over-UART driver.
+
+	  This driver provides support for Marvell NFC-over-UART devices
+
+	  Say Y here to compile support for Marvell NFC-over-UART driver
+	  into the kernel or say M to compile it as module.
diff --git a/drivers/nfc/nfcmrvl/Makefile b/drivers/nfc/nfcmrvl/Makefile
index 97a0de72d..775196274 100644
--- a/drivers/nfc/nfcmrvl/Makefile
+++ b/drivers/nfc/nfcmrvl/Makefile
@@ -7,3 +7,6 @@ obj-$(CONFIG_NFC_MRVL) += nfcmrvl.o
 
 nfcmrvl_usb-y += usb.o
 obj-$(CONFIG_NFC_MRVL_USB) += nfcmrvl_usb.o
+
+nfcmrvl_uart-y += uart.o
+obj-$(CONFIG_NFC_MRVL_UART) += nfcmrvl_uart.o
diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c
index ad4933cef..4a8866d62 100644
--- a/drivers/nfc/nfcmrvl/main.c
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -17,6 +17,9 @@
  */
 
 #include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/of_gpio.h>
 #include <linux/nfc.h>
 #include <net/nfc/nci.h>
 #include <net/nfc/nci_core.h>
@@ -63,20 +66,25 @@ static int nfcmrvl_nci_send(struct nci_dev *ndev, struct sk_buff *skb)
 	if (!test_bit(NFCMRVL_NCI_RUNNING, &priv->flags))
 		return -EBUSY;
 
+	if (priv->config.hci_muxed) {
+		unsigned char *hdr;
+		unsigned char len = skb->len;
+
+		hdr = (char *) skb_push(skb, NFCMRVL_HCI_EVENT_HEADER_SIZE);
+		hdr[0] = NFCMRVL_HCI_COMMAND_CODE;
+		hdr[1] = NFCMRVL_HCI_OGF;
+		hdr[2] = NFCMRVL_HCI_OCF;
+		hdr[3] = len;
+	}
+
 	return priv->if_ops->nci_send(priv, skb);
 }
 
 static int nfcmrvl_nci_setup(struct nci_dev *ndev)
 {
-	__u8 val;
-
-	val = NFCMRVL_GPIO_PIN_NFC_NOT_ALLOWED;
-	nci_set_config(ndev, NFCMRVL_NOT_ALLOWED_ID, 1, &val);
-	val = NFCMRVL_GPIO_PIN_NFC_ACTIVE;
-	nci_set_config(ndev, NFCMRVL_ACTIVE_ID, 1, &val);
-	val = NFCMRVL_EXT_COEX_ENABLE;
-	nci_set_config(ndev, NFCMRVL_EXT_COEX_ID, 1, &val);
+	__u8 val = 1;
 
+	nci_set_config(ndev, NFCMRVL_PB_BAIL_OUT, 1, &val);
 	return 0;
 }
 
@@ -88,11 +96,13 @@ static struct nci_ops nfcmrvl_nci_ops = {
 };
 
 struct nfcmrvl_private *nfcmrvl_nci_register_dev(void *drv_data,
-						 struct nfcmrvl_if_ops *ops,
-						 struct device *dev)
+				struct nfcmrvl_if_ops *ops,
+				struct device *dev,
+				struct nfcmrvl_platform_data *pdata)
 {
 	struct nfcmrvl_private *priv;
 	int rc;
+	int headroom = 0;
 	u32 protocols;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -103,13 +113,30 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(void *drv_data,
 	priv->if_ops = ops;
 	priv->dev = dev;
 
+	memcpy(&priv->config, pdata, sizeof(*pdata));
+
+	if (priv->config.reset_n_io) {
+		rc = devm_gpio_request_one(dev,
+					   priv->config.reset_n_io,
+					   GPIOF_OUT_INIT_LOW,
+					   "nfcmrvl_reset_n");
+		if (rc < 0)
+			nfc_err(dev, "failed to request reset_n io\n");
+	}
+
+	if (priv->config.hci_muxed)
+		headroom = NFCMRVL_HCI_EVENT_HEADER_SIZE;
+
 	protocols = NFC_PROTO_JEWEL_MASK
-		| NFC_PROTO_MIFARE_MASK | NFC_PROTO_FELICA_MASK
+		| NFC_PROTO_MIFARE_MASK
+		| NFC_PROTO_FELICA_MASK
 		| NFC_PROTO_ISO14443_MASK
 		| NFC_PROTO_ISO14443_B_MASK
+		| NFC_PROTO_ISO15693_MASK
 		| NFC_PROTO_NFC_DEP_MASK;
 
-	priv->ndev = nci_allocate_device(&nfcmrvl_nci_ops, protocols, 0, 0);
+	priv->ndev = nci_allocate_device(&nfcmrvl_nci_ops, protocols,
+					 headroom, 0);
 	if (!priv->ndev) {
 		nfc_err(dev, "nci_allocate_device failed\n");
 		rc = -ENOMEM;
@@ -118,6 +145,8 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(void *drv_data,
 
 	nci_set_drvdata(priv->ndev, priv);
 
+	nfcmrvl_chip_reset(priv);
+
 	rc = nci_register_device(priv->ndev);
 	if (rc) {
 		nfc_err(dev, "nci_register_device failed %d\n", rc);
@@ -144,21 +173,84 @@ void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv)
 }
 EXPORT_SYMBOL_GPL(nfcmrvl_nci_unregister_dev);
 
-int nfcmrvl_nci_recv_frame(struct nfcmrvl_private *priv, void *data, int count)
+int nfcmrvl_nci_recv_frame(struct nfcmrvl_private *priv, struct sk_buff *skb)
 {
-	struct sk_buff *skb;
-
-	skb = nci_skb_alloc(priv->ndev, count, GFP_ATOMIC);
-	if (!skb)
-		return -ENOMEM;
+	if (priv->config.hci_muxed) {
+		if (skb->data[0] == NFCMRVL_HCI_EVENT_CODE &&
+		    skb->data[1] == NFCMRVL_HCI_NFC_EVENT_CODE) {
+			/* Data packet, let's extract NCI payload */
+			skb_pull(skb, NFCMRVL_HCI_EVENT_HEADER_SIZE);
+		} else {
+			/* Skip this packet */
+			kfree_skb(skb);
+			return 0;
+		}
+	}
 
-	memcpy(skb_put(skb, count), data, count);
-	nci_recv_frame(priv->ndev, skb);
+	if (test_bit(NFCMRVL_NCI_RUNNING, &priv->flags))
+		nci_recv_frame(priv->ndev, skb);
+	else {
+		/* Drop this packet since nobody wants it */
+		kfree_skb(skb);
+		return 0;
+	}
 
-	return count;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(nfcmrvl_nci_recv_frame);
 
+void nfcmrvl_chip_reset(struct nfcmrvl_private *priv)
+{
+	/*
+	 * This function does not take care if someone is using the device.
+	 * To be improved.
+	 */
+
+	if (priv->config.reset_n_io) {
+		nfc_info(priv->dev, "reset the chip\n");
+		gpio_set_value(priv->config.reset_n_io, 0);
+		usleep_range(5000, 10000);
+		gpio_set_value(priv->config.reset_n_io, 1);
+	} else
+		nfc_info(priv->dev, "no reset available on this interface\n");
+}
+
+#ifdef CONFIG_OF
+
+int nfcmrvl_parse_dt(struct device_node *node,
+		     struct nfcmrvl_platform_data *pdata)
+{
+	int reset_n_io;
+
+	reset_n_io = of_get_named_gpio(node, "reset-n-io", 0);
+	if (reset_n_io < 0) {
+		pr_info("no reset-n-io config\n");
+		reset_n_io = 0;
+	} else if (!gpio_is_valid(reset_n_io)) {
+		pr_err("invalid reset-n-io GPIO\n");
+		return reset_n_io;
+	}
+	pdata->reset_n_io = reset_n_io;
+
+	if (of_find_property(node, "hci-muxed", NULL))
+		pdata->hci_muxed = 1;
+	else
+		pdata->hci_muxed = 0;
+
+	return 0;
+}
+
+#else
+
+int nfcmrvl_parse_dt(struct device_node *node,
+		     struct nfcmrvl_platform_data *pdata)
+{
+	return -ENODEV;
+}
+
+#endif
+EXPORT_SYMBOL_GPL(nfcmrvl_parse_dt);
+
 MODULE_AUTHOR("Marvell International Ltd.");
 MODULE_DESCRIPTION("Marvell NFC driver ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/nfc/nfcmrvl/nfcmrvl.h b/drivers/nfc/nfcmrvl/nfcmrvl.h
index 54c4a956b..e5a7e5464 100644
--- a/drivers/nfc/nfcmrvl/nfcmrvl.h
+++ b/drivers/nfc/nfcmrvl/nfcmrvl.h
@@ -16,6 +16,11 @@
  * this warranty disclaimer.
  **/
 
+#ifndef _NFCMRVL_H_
+#define _NFCMRVL_H_
+
+#include <linux/platform_data/nfcmrvl.h>
+
 /* Define private flags: */
 #define NFCMRVL_NCI_RUNNING			1
 
@@ -27,11 +32,49 @@
 #define NFCMRVL_GPIO_PIN_NFC_ACTIVE		0xB
 #define NFCMRVL_NCI_MAX_EVENT_SIZE		260
 
+/*
+** NCI FW Parmaters
+*/
+
+#define NFCMRVL_PB_BAIL_OUT			0x11
+
+/*
+** HCI defines
+*/
+
+#define NFCMRVL_HCI_EVENT_HEADER_SIZE		0x04
+#define NFCMRVL_HCI_EVENT_CODE			0x04
+#define NFCMRVL_HCI_NFC_EVENT_CODE		0xFF
+#define NFCMRVL_HCI_COMMAND_CODE		0x01
+#define NFCMRVL_HCI_OGF				0x81
+#define NFCMRVL_HCI_OCF				0xFE
+
+enum nfcmrvl_phy {
+	NFCMRVL_PHY_USB		= 0,
+	NFCMRVL_PHY_UART	= 1,
+};
+
+
 struct nfcmrvl_private {
-	struct nci_dev *ndev;
+
 	unsigned long flags;
+
+	/* Platform configuration */
+	struct nfcmrvl_platform_data config;
+
+	struct nci_dev *ndev;
+
+	/*
+	** PHY related information
+	*/
+
+	/* PHY driver context */
 	void *drv_data;
+	/* PHY device */
 	struct device *dev;
+	/* PHY type */
+	enum nfcmrvl_phy phy;
+	/* Low level driver ops */
 	struct nfcmrvl_if_ops *if_ops;
 };
 
@@ -42,7 +85,16 @@ struct nfcmrvl_if_ops {
 };
 
 void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv);
-int nfcmrvl_nci_recv_frame(struct nfcmrvl_private *priv, void *data, int count);
+int nfcmrvl_nci_recv_frame(struct nfcmrvl_private *priv, struct sk_buff *skb);
 struct nfcmrvl_private *nfcmrvl_nci_register_dev(void *drv_data,
-						 struct nfcmrvl_if_ops *ops,
-						 struct device *dev);
+				struct nfcmrvl_if_ops *ops,
+				struct device *dev,
+				struct nfcmrvl_platform_data *pdata);
+
+
+void nfcmrvl_chip_reset(struct nfcmrvl_private *priv);
+
+int nfcmrvl_parse_dt(struct device_node *node,
+		     struct nfcmrvl_platform_data *pdata);
+
+#endif
diff --git a/drivers/nfc/nfcmrvl/uart.c b/drivers/nfc/nfcmrvl/uart.c
new file mode 100644
index 000000000..61442d652
--- /dev/null
+++ b/drivers/nfc/nfcmrvl/uart.c
@@ -0,0 +1,225 @@
+/**
+ * Marvell NFC-over-UART driver
+ *
+ * Copyright (C) 2015, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/of_gpio.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+#include "nfcmrvl.h"
+
+static unsigned int hci_muxed;
+static unsigned int flow_control;
+static unsigned int break_control;
+static unsigned int reset_n_io;
+
+/*
+** NFCMRVL NCI OPS
+*/
+
+static int nfcmrvl_uart_nci_open(struct nfcmrvl_private *priv)
+{
+	return 0;
+}
+
+static int nfcmrvl_uart_nci_close(struct nfcmrvl_private *priv)
+{
+	return 0;
+}
+
+static int nfcmrvl_uart_nci_send(struct nfcmrvl_private *priv,
+				 struct sk_buff *skb)
+{
+	struct nci_uart *nu = priv->drv_data;
+
+	return nu->ops.send(nu, skb);
+}
+
+static struct nfcmrvl_if_ops uart_ops = {
+	.nci_open = nfcmrvl_uart_nci_open,
+	.nci_close = nfcmrvl_uart_nci_close,
+	.nci_send = nfcmrvl_uart_nci_send,
+};
+
+#ifdef CONFIG_OF
+
+static int nfcmrvl_uart_parse_dt(struct device_node *node,
+				 struct nfcmrvl_platform_data *pdata)
+{
+	struct device_node *matched_node;
+	int ret;
+
+	matched_node = of_find_compatible_node(node, NULL, "mrvl,nfc-uart");
+	if (!matched_node)
+		return -ENODEV;
+
+	ret = nfcmrvl_parse_dt(matched_node, pdata);
+	if (ret < 0) {
+		pr_err("Failed to get generic entries\n");
+		return ret;
+	}
+
+	if (of_find_property(matched_node, "flow-control", NULL))
+		pdata->flow_control = 1;
+	else
+		pdata->flow_control = 0;
+
+	if (of_find_property(matched_node, "break-control", NULL))
+		pdata->break_control = 1;
+	else
+		pdata->break_control = 0;
+
+	return 0;
+}
+
+#else
+
+static int nfcmrvl_uart_parse_dt(struct device_node *node,
+				 struct nfcmrvl_platform_data *pdata)
+{
+	return -ENODEV;
+}
+
+#endif
+
+/*
+** NCI UART OPS
+*/
+
+static int nfcmrvl_nci_uart_open(struct nci_uart *nu)
+{
+	struct nfcmrvl_private *priv;
+	struct nfcmrvl_platform_data *pdata = NULL;
+	struct nfcmrvl_platform_data config;
+
+	/*
+	 * Platform data cannot be used here since usually it is already used
+	 * by low level serial driver. We can try to retrieve serial device
+	 * and check if DT entries were added.
+	 */
+
+	if (nu->tty->dev->parent && nu->tty->dev->parent->of_node)
+		if (nfcmrvl_uart_parse_dt(nu->tty->dev->parent->of_node,
+					  &config) == 0)
+			pdata = &config;
+
+	if (!pdata) {
+		pr_info("No platform data / DT -> fallback to module params\n");
+		config.hci_muxed = hci_muxed;
+		config.reset_n_io = reset_n_io;
+		config.flow_control = flow_control;
+		config.break_control = break_control;
+		pdata = &config;
+	}
+
+	priv = nfcmrvl_nci_register_dev(nu, &uart_ops, nu->tty->dev, pdata);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
+
+	priv->phy = NFCMRVL_PHY_UART;
+
+	nu->drv_data = priv;
+	nu->ndev = priv->ndev;
+
+	/* Set BREAK */
+	if (priv->config.break_control && nu->tty->ops->break_ctl)
+		nu->tty->ops->break_ctl(nu->tty, -1);
+
+	return 0;
+}
+
+static void nfcmrvl_nci_uart_close(struct nci_uart *nu)
+{
+	nfcmrvl_nci_unregister_dev((struct nfcmrvl_private *)nu->drv_data);
+}
+
+static int nfcmrvl_nci_uart_recv(struct nci_uart *nu, struct sk_buff *skb)
+{
+	return nfcmrvl_nci_recv_frame((struct nfcmrvl_private *)nu->drv_data,
+				      skb);
+}
+
+static void nfcmrvl_nci_uart_tx_start(struct nci_uart *nu)
+{
+	struct nfcmrvl_private *priv = (struct nfcmrvl_private *)nu->drv_data;
+
+	/* Remove BREAK to wake up the NFCC */
+	if (priv->config.break_control && nu->tty->ops->break_ctl) {
+		nu->tty->ops->break_ctl(nu->tty, 0);
+		usleep_range(3000, 5000);
+	}
+}
+
+static void nfcmrvl_nci_uart_tx_done(struct nci_uart *nu)
+{
+	struct nfcmrvl_private *priv = (struct nfcmrvl_private *)nu->drv_data;
+
+	/*
+	** To ensure that if the NFCC goes in DEEP SLEEP sate we can wake him
+	** up. we set BREAK. Once we will be ready to send again we will remove
+	** it.
+	*/
+	if (priv->config.break_control && nu->tty->ops->break_ctl)
+		nu->tty->ops->break_ctl(nu->tty, -1);
+}
+
+static struct nci_uart nfcmrvl_nci_uart = {
+	.owner  = THIS_MODULE,
+	.name   = "nfcmrvl_uart",
+	.driver = NCI_UART_DRIVER_MARVELL,
+	.ops	= {
+		.open		= nfcmrvl_nci_uart_open,
+		.close		= nfcmrvl_nci_uart_close,
+		.recv		= nfcmrvl_nci_uart_recv,
+		.tx_start	= nfcmrvl_nci_uart_tx_start,
+		.tx_done	= nfcmrvl_nci_uart_tx_done,
+	}
+};
+
+/*
+** Module init
+*/
+
+static int nfcmrvl_uart_init_module(void)
+{
+	return nci_uart_register(&nfcmrvl_nci_uart);
+}
+
+static void nfcmrvl_uart_exit_module(void)
+{
+	nci_uart_unregister(&nfcmrvl_nci_uart);
+}
+
+module_init(nfcmrvl_uart_init_module);
+module_exit(nfcmrvl_uart_exit_module);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell NFC-over-UART");
+MODULE_LICENSE("GPL v2");
+
+module_param(flow_control, uint, 0);
+MODULE_PARM_DESC(flow_control, "Tell if UART needs flow control at init.");
+
+module_param(break_control, uint, 0);
+MODULE_PARM_DESC(break_control, "Tell if UART driver must drive break signal.");
+
+module_param(hci_muxed, uint, 0);
+MODULE_PARM_DESC(hci_muxed, "Tell if transport is muxed in HCI one.");
+
+module_param(reset_n_io, uint, 0);
+MODULE_PARM_DESC(reset_n_io, "GPIO that is wired to RESET_N signal.");
diff --git a/drivers/nfc/nfcmrvl/usb.c b/drivers/nfc/nfcmrvl/usb.c
index 6cf15c1a2..7d1fe436c 100644
--- a/drivers/nfc/nfcmrvl/usb.c
+++ b/drivers/nfc/nfcmrvl/usb.c
@@ -26,7 +26,8 @@
 #define VERSION "1.0"
 
 static struct usb_device_id nfcmrvl_table[] = {
-	{ USB_DEVICE_INTERFACE_CLASS(0x1286, 0x2046, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1286, 0x2046,
+					USB_CLASS_VENDOR_SPEC, 4, 1) },
 	{ }	/* Terminating entry */
 };
 
@@ -69,18 +70,27 @@ static int nfcmrvl_inc_tx(struct nfcmrvl_usb_drv_data *drv_data)
 static void nfcmrvl_bulk_complete(struct urb *urb)
 {
 	struct nfcmrvl_usb_drv_data *drv_data = urb->context;
+	struct sk_buff *skb;
 	int err;
 
-	dev_dbg(&drv_data->udev->dev, "urb %p status %d count %d",
+	dev_dbg(&drv_data->udev->dev, "urb %p status %d count %d\n",
 		urb, urb->status, urb->actual_length);
 
 	if (!test_bit(NFCMRVL_NCI_RUNNING, &drv_data->flags))
 		return;
 
 	if (!urb->status) {
-		if (nfcmrvl_nci_recv_frame(drv_data->priv, urb->transfer_buffer,
-					   urb->actual_length) < 0)
-			nfc_err(&drv_data->udev->dev, "corrupted Rx packet\n");
+		skb = nci_skb_alloc(drv_data->priv->ndev, urb->actual_length,
+				    GFP_ATOMIC);
+		if (!skb) {
+			nfc_err(&drv_data->udev->dev, "failed to alloc mem\n");
+		} else {
+			memcpy(skb_put(skb, urb->actual_length),
+			       urb->transfer_buffer, urb->actual_length);
+			if (nfcmrvl_nci_recv_frame(drv_data->priv, skb) < 0)
+				nfc_err(&drv_data->udev->dev,
+					"corrupted Rx packet\n");
+		}
 	}
 
 	if (!test_bit(NFCMRVL_USB_BULK_RUNNING, &drv_data->flags))
@@ -292,6 +302,10 @@ static int nfcmrvl_probe(struct usb_interface *intf,
 	struct nfcmrvl_private *priv;
 	int i;
 	struct usb_device *udev = interface_to_usbdev(intf);
+	struct nfcmrvl_platform_data config;
+
+	/* No configuration for USB */
+	memset(&config, 0, sizeof(config));
 
 	nfc_info(&udev->dev, "intf %p id %p\n", intf, id);
 
@@ -329,11 +343,12 @@ static int nfcmrvl_probe(struct usb_interface *intf,
 	init_usb_anchor(&drv_data->deferred);
 
 	priv = nfcmrvl_nci_register_dev(drv_data, &usb_ops,
-					&drv_data->udev->dev);
+					&drv_data->udev->dev, &config);
 	if (IS_ERR(priv))
 		return PTR_ERR(priv);
 
 	drv_data->priv = priv;
+	drv_data->priv->phy = NFCMRVL_PHY_USB;
 	priv->dev = &drv_data->udev->dev;
 
 	usb_set_intfdata(intf, drv_data);