summaryrefslogtreecommitdiff
path: root/drivers/parisc/Kconfig
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/parisc/Kconfig
Initial import
Diffstat (limited to 'drivers/parisc/Kconfig')
-rw-r--r--drivers/parisc/Kconfig187
1 files changed, 187 insertions, 0 deletions
diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
new file mode 100644
index 000000000..592de566e
--- /dev/null
+++ b/drivers/parisc/Kconfig
@@ -0,0 +1,187 @@
+menu "Bus options (PCI, PCMCIA, EISA, GSC, ISA)"
+
+config GSC
+ bool "VSC/GSC/HSC bus support"
+ default y
+ help
+ The VSC, GSC and HSC busses were used from the earliest 700-series
+ workstations up to and including the C360/J2240 workstations. They
+ were also used in servers from the E-class to the K-class. They
+ are not found in B1000, C3000, J5000, A500, L1000, N4000 and upwards.
+ If in doubt, say "Y".
+
+config HPPB
+ bool "HP-PB bus support"
+ depends on GSC
+ help
+ The HP-PB bus was used in the Nova class and K-class servers.
+ If in doubt, say "Y"
+
+config IOMMU_CCIO
+ bool "U2/Uturn I/O MMU"
+ depends on GSC
+ help
+ Say Y here to enable DMA management routines for the first
+ generation of PA-RISC cache-coherent machines. Programs the
+ U2/Uturn chip in "Virtual Mode" and use the I/O MMU.
+
+config GSC_LASI
+ bool "Lasi I/O support"
+ depends on GSC
+ help
+ Say Y here to support the Lasi multifunction chip found in
+ many PA-RISC workstations & servers. It includes interfaces
+ for a parallel port, serial port, NCR 53c710 SCSI, Apricot
+ Ethernet, Harmony audio, PS/2 keyboard & mouse, ISDN, telephony
+ and floppy. Note that you must still enable all the individual
+ drivers for these chips.
+
+config GSC_WAX
+ bool "Wax I/O support"
+ depends on GSC
+ help
+ Say Y here to support the Wax multifunction chip found in some
+ older systems, including B/C/D/R class and 715/64, 715/80 and
+ 715/100. Wax includes an EISA adapter, a serial port (not always
+ used), a HIL interface chip and is also known to be used as the
+ GSC bridge for an X.25 GSC card.
+
+config EISA
+ bool "EISA support"
+ depends on GSC
+ help
+ Say Y here if you have an EISA bus in your machine. This code
+ supports both the Mongoose & Wax EISA adapters. It is sadly
+ incomplete and lacks support for card-to-host DMA.
+
+source "drivers/eisa/Kconfig"
+
+config ISA
+ bool "ISA support"
+ depends on EISA
+ help
+ If you want to plug an ISA card into your EISA bus, say Y here.
+ Most people should say N.
+
+config PCI
+ bool "PCI support"
+ help
+ All recent HP machines have PCI slots, and you should say Y here
+ if you have a recent machine. If you are convinced you do not have
+ PCI slots in your machine (eg a 712), then you may say "N" here.
+ Beware that some GSC cards have a Dino onboard and PCI inside them,
+ so it may be safest to say "Y" anyway.
+
+source "drivers/pci/Kconfig"
+
+config GSC_DINO
+ bool "GSCtoPCI/Dino PCI support"
+ depends on PCI && GSC
+ help
+ Say Y here to support the Dino & Cujo GSC to PCI bridges found in
+ machines from the B132 to the C360, the J2240 and the A180. Some
+ GSC/HSC cards (eg gigabit & dual 100 Mbit Ethernet) have a Dino on
+ the card, and you also need to say Y here if you have such a card.
+ Note that Dino also supplies one of the serial ports on certain
+ machines. If in doubt, say Y.
+
+config PCI_LBA
+ bool "LBA/Elroy PCI support"
+ depends on PCI
+ help
+ Say Y here to support the Elroy PCI Lower Bus Adapter. This is
+ present on B, C, J, L and N-class machines with 4-digit model
+ numbers and the A400/A500.
+
+config IOSAPIC
+ bool
+ depends on PCI_LBA
+ default PCI_LBA
+
+config IOMMU_SBA
+ bool
+ depends on PCI_LBA
+ default PCI_LBA
+
+config IOMMU_HELPER
+ bool
+ depends on IOMMU_SBA || IOMMU_CCIO
+ default y
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "PA-RISC specific drivers"
+
+config SUPERIO
+ bool "SuperIO (SuckyIO) support"
+ depends on PCI_LBA
+ default y
+ help
+ Say Y here to support the SuperIO chip found in Bxxxx, C3xxx and
+ J5xxx+ machines. This enables IDE, Floppy, Parallel Port, and
+ Serial port on those machines.
+
+config CHASSIS_LCD_LED
+ bool "Chassis LCD and LED support"
+ default y
+ select VM_EVENT_COUNTERS
+ help
+ Say Y here if you want to enable support for the Heartbeat,
+ Disk/Network activities LEDs on some PA-RISC machines,
+ or support for the LCD that can be found on recent material.
+
+ This has nothing to do with LED State support for A and E class.
+
+ If unsure, say Y.
+
+config PDC_CHASSIS
+ bool "PDC chassis state codes support"
+ default y
+ help
+ Say Y here if you want to enable support for Chassis codes.
+ That includes support for LED State front panel as found on E
+ class, and support for the GSP Virtual Front Panel (LED State and
+ message logging) as found on high end servers such as A, L and
+ N-class.
+ This driver will also display progress messages on LCD display,
+ such as "INI", "RUN" and "FLT", and might thus clobber messages
+ shown by the LED/LCD driver.
+ This driver updates the state panel (LED and/or LCD) upon system
+ state change (eg: boot, shutdown or panic).
+
+ If unsure, say Y.
+
+
+config PDC_CHASSIS_WARN
+ bool "PDC chassis warnings support"
+ depends on PROC_FS
+ default y
+ help
+ Say Y here if you want to enable support for Chassis warnings.
+ This will add a proc entry '/proc/chassis' giving some information
+ about the overall health state of the system.
+ This includes NVRAM battery level, overtemp or failures such as
+ fans or power units.
+
+ If unsure, say Y.
+
+
+config PDC_STABLE
+ tristate "PDC Stable Storage support"
+ depends on SYSFS
+ default y
+ help
+ Say Y here if you want to enable support for accessing Stable Storage
+ variables (PDC non volatile variables such as Primary Boot Path,
+ Console Path, Autoboot, Autosearch, etc) through SysFS.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here.
+ The module will be called pdc_stable.
+
+endmenu