Initial import

1 files changed, 455 insertions, 0 deletions

diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
new file mode 100644
index 000000000..103095bbe
--- /dev/null
+++ b/drivers/parisc/eisa.c
@@ -0,0 +1,455 @@
+/*
+ * eisa.c - provide support for EISA adapters in PA-RISC machines
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Copyright (c) 2001 Matthew Wilcox for Hewlett Packard
+ * Copyright (c) 2001 Daniel Engstrom <5116@telia.com>
+ *
+ * There are two distinct EISA adapters.  Mongoose is found in machines
+ * before the 712; then the Wax ASIC is used.  To complicate matters, the
+ * Wax ASIC also includes a PS/2 and RS-232 controller, but those are
+ * dealt with elsewhere; this file is concerned only with the EISA portions
+ * of Wax.
+ * 
+ * 
+ * HINT:
+ * -----
+ * To allow an ISA card to work properly in the EISA slot you need to
+ * set an edge trigger level. This may be done on the palo command line 
+ * by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with 
+ * n and n2 as the irq levels you want to use.
+ * 
+ * Example: "eisa_irq_edge=10,11" allows ISA cards to operate at 
+ * irq levels 10 and 11.
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/eisa.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/processor.h>
+#include <asm/parisc-device.h>
+#include <asm/delay.h>
+#include <asm/eisa_bus.h>
+#include <asm/eisa_eeprom.h>
+
+#if 0
+#define EISA_DBG(msg, arg... ) printk(KERN_DEBUG "eisa: " msg , ## arg )
+#else
+#define EISA_DBG(msg, arg... )  
+#endif
+
+#define SNAKES_EEPROM_BASE_ADDR 0xF0810400
+#define MIRAGE_EEPROM_BASE_ADDR 0xF00C0400
+
+static DEFINE_SPINLOCK(eisa_irq_lock);
+
+void __iomem *eisa_eeprom_addr __read_mostly;
+
+/* We can only have one EISA adapter in the system because neither
+ * implementation can be flexed.
+ */
+static struct eisa_ba {
+	struct pci_hba_data	hba;
+	unsigned long eeprom_addr;
+	struct eisa_root_device root;
+} eisa_dev;
+
+/* Port ops */
+
+static inline unsigned long eisa_permute(unsigned short port)
+{
+	if (port & 0x300) {
+		return 0xfc000000 | ((port & 0xfc00) >> 6)
+			| ((port & 0x3f8) << 9) | (port & 7);
+	} else {
+		return 0xfc000000 | port;
+	}
+}
+
+unsigned char eisa_in8(unsigned short port)
+{
+	if (EISA_bus)
+		return gsc_readb(eisa_permute(port));
+	return 0xff;
+}
+
+unsigned short eisa_in16(unsigned short port)
+{
+	if (EISA_bus)
+		return le16_to_cpu(gsc_readw(eisa_permute(port)));
+	return 0xffff;
+}
+
+unsigned int eisa_in32(unsigned short port)
+{
+	if (EISA_bus)
+		return le32_to_cpu(gsc_readl(eisa_permute(port)));
+	return 0xffffffff;
+}
+
+void eisa_out8(unsigned char data, unsigned short port)
+{
+	if (EISA_bus)
+		gsc_writeb(data, eisa_permute(port));
+}
+
+void eisa_out16(unsigned short data, unsigned short port)
+{
+	if (EISA_bus)	
+		gsc_writew(cpu_to_le16(data), eisa_permute(port));
+}
+
+void eisa_out32(unsigned int data, unsigned short port)
+{
+	if (EISA_bus)
+		gsc_writel(cpu_to_le32(data), eisa_permute(port));
+}
+
+#ifndef CONFIG_PCI
+/* We call these directly without PCI.  See asm/io.h. */
+EXPORT_SYMBOL(eisa_in8);
+EXPORT_SYMBOL(eisa_in16);
+EXPORT_SYMBOL(eisa_in32);
+EXPORT_SYMBOL(eisa_out8);
+EXPORT_SYMBOL(eisa_out16);
+EXPORT_SYMBOL(eisa_out32);
+#endif
+
+/* Interrupt handling */
+
+/* cached interrupt mask registers */
+static int master_mask;
+static int slave_mask;
+
+/* the trig level can be set with the
+ * eisa_irq_edge=n,n,n commandline parameter 
+ * We should really read this from the EEPROM 
+ * in the furure. 
+ */
+/* irq 13,8,2,1,0 must be edge */
+static unsigned int eisa_irq_level __read_mostly; /* default to edge triggered */
+
+
+/* called by free irq */
+static void eisa_mask_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+	unsigned long flags;
+
+	EISA_DBG("disable irq %d\n", irq);
+	/* just mask for now */
+	spin_lock_irqsave(&eisa_irq_lock, flags);
+        if (irq & 8) {
+		slave_mask |= (1 << (irq&7));
+		eisa_out8(slave_mask, 0xa1);
+	} else {
+		master_mask |= (1 << (irq&7));
+		eisa_out8(master_mask, 0x21);
+	}
+	spin_unlock_irqrestore(&eisa_irq_lock, flags);
+	EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
+	EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
+}
+
+/* called by request irq */
+static void eisa_unmask_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+	unsigned long flags;
+	EISA_DBG("enable irq %d\n", irq);
+		
+	spin_lock_irqsave(&eisa_irq_lock, flags);
+        if (irq & 8) {
+		slave_mask &= ~(1 << (irq&7));
+		eisa_out8(slave_mask, 0xa1);
+	} else {
+		master_mask &= ~(1 << (irq&7));
+		eisa_out8(master_mask, 0x21);
+	}
+	spin_unlock_irqrestore(&eisa_irq_lock, flags);
+	EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
+	EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
+}
+
+static struct irq_chip eisa_interrupt_type = {
+	.name		=	"EISA",
+	.irq_unmask	=	eisa_unmask_irq,
+	.irq_mask	=	eisa_mask_irq,
+};
+
+static irqreturn_t eisa_irq(int wax_irq, void *intr_dev)
+{
+	int irq = gsc_readb(0xfc01f000); /* EISA supports 16 irqs */
+	unsigned long flags;
+        
+	spin_lock_irqsave(&eisa_irq_lock, flags);
+	/* read IRR command */
+	eisa_out8(0x0a, 0x20);
+	eisa_out8(0x0a, 0xa0);
+
+	EISA_DBG("irq IAR %02x 8259-1 irr %02x 8259-2 irr %02x\n",
+		   irq, eisa_in8(0x20), eisa_in8(0xa0));
+   
+	/* read ISR command */
+	eisa_out8(0x0a, 0x20);
+	eisa_out8(0x0a, 0xa0);
+	EISA_DBG("irq 8259-1 isr %02x imr %02x 8259-2 isr %02x imr %02x\n",
+		 eisa_in8(0x20), eisa_in8(0x21), eisa_in8(0xa0), eisa_in8(0xa1));
+	
+	irq &= 0xf;
+	
+	/* mask irq and write eoi */
+	if (irq & 8) {
+		slave_mask |= (1 << (irq&7));
+		eisa_out8(slave_mask, 0xa1);
+		eisa_out8(0x60 | (irq&7),0xa0);/* 'Specific EOI' to slave */
+		eisa_out8(0x62,0x20);	/* 'Specific EOI' to master-IRQ2 */
+		
+	} else {
+		master_mask |= (1 << (irq&7));
+		eisa_out8(master_mask, 0x21);
+		eisa_out8(0x60|irq,0x20);	/* 'Specific EOI' to master */
+	}
+	spin_unlock_irqrestore(&eisa_irq_lock, flags);
+
+	generic_handle_irq(irq);
+   
+	spin_lock_irqsave(&eisa_irq_lock, flags);
+	/* unmask */
+        if (irq & 8) {
+		slave_mask &= ~(1 << (irq&7));
+		eisa_out8(slave_mask, 0xa1);
+	} else {
+		master_mask &= ~(1 << (irq&7));
+		eisa_out8(master_mask, 0x21);
+	}
+	spin_unlock_irqrestore(&eisa_irq_lock, flags);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dummy_irq2_handler(int _, void *dev)
+{
+	printk(KERN_ALERT "eisa: uhh, irq2?\n");
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq2_action = {
+	.handler = dummy_irq2_handler,
+	.name = "cascade",
+};
+
+static void init_eisa_pic(void)
+{
+	unsigned long flags;
+	
+	spin_lock_irqsave(&eisa_irq_lock, flags);
+
+	eisa_out8(0xff, 0x21); /* mask during init */
+	eisa_out8(0xff, 0xa1); /* mask during init */
+	
+	/* master pic */
+	eisa_out8(0x11,0x20); /* ICW1 */   
+	eisa_out8(0x00,0x21); /* ICW2 */   
+	eisa_out8(0x04,0x21); /* ICW3 */   
+	eisa_out8(0x01,0x21); /* ICW4 */   
+	eisa_out8(0x40,0x20); /* OCW2 */   
+	
+	/* slave pic */
+	eisa_out8(0x11,0xa0); /* ICW1 */   
+	eisa_out8(0x08,0xa1); /* ICW2 */   
+        eisa_out8(0x02,0xa1); /* ICW3 */   
+	eisa_out8(0x01,0xa1); /* ICW4 */   
+	eisa_out8(0x40,0xa0); /* OCW2 */   
+        
+	udelay(100);
+	
+	slave_mask = 0xff; 
+	master_mask = 0xfb; 
+	eisa_out8(slave_mask, 0xa1); /* OCW1 */
+	eisa_out8(master_mask, 0x21); /* OCW1 */
+	
+	/* setup trig level */
+	EISA_DBG("EISA edge/level %04x\n", eisa_irq_level);
+	
+	eisa_out8(eisa_irq_level&0xff, 0x4d0); /* Set all irq's to edge  */
+	eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1); 
+	
+	EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
+	EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
+	EISA_DBG("pic0 edge/level %02x\n", eisa_in8(0x4d0));
+	EISA_DBG("pic1 edge/level %02x\n", eisa_in8(0x4d1));
+	
+	spin_unlock_irqrestore(&eisa_irq_lock, flags);
+}
+
+/* Device initialisation */
+
+#define is_mongoose(dev) (dev->id.sversion == 0x00076)
+
+static int __init eisa_probe(struct parisc_device *dev)
+{
+	int i, result;
+
+	char *name = is_mongoose(dev) ? "Mongoose" : "Wax";
+
+	printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", 
+		name, (unsigned long)dev->hpa.start);
+
+	eisa_dev.hba.dev = dev;
+	eisa_dev.hba.iommu = ccio_get_iommu(dev);
+
+	eisa_dev.hba.lmmio_space.name = "EISA";
+	eisa_dev.hba.lmmio_space.start = F_EXTEND(0xfc000000);
+	eisa_dev.hba.lmmio_space.end = F_EXTEND(0xffbfffff);
+	eisa_dev.hba.lmmio_space.flags = IORESOURCE_MEM;
+	result = ccio_request_resource(dev, &eisa_dev.hba.lmmio_space);
+	if (result < 0) {
+		printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n");
+		return result;
+	}
+	eisa_dev.hba.io_space.name = "EISA";
+	eisa_dev.hba.io_space.start = 0;
+	eisa_dev.hba.io_space.end = 0xffff;
+	eisa_dev.hba.lmmio_space.flags = IORESOURCE_IO;
+	result = request_resource(&ioport_resource, &eisa_dev.hba.io_space);
+	if (result < 0) {
+		printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n");
+		return result;
+	}
+	pcibios_register_hba(&eisa_dev.hba);
+
+	result = request_irq(dev->irq, eisa_irq, IRQF_SHARED, "EISA", &eisa_dev);
+	if (result) {
+		printk(KERN_ERR "EISA: request_irq failed!\n");
+		return result;
+	}
+	
+	/* Reserve IRQ2 */
+	setup_irq(2, &irq2_action);
+	for (i = 0; i < 16; i++) {
+		irq_set_chip_and_handler(i, &eisa_interrupt_type,
+					 handle_simple_irq);
+	}
+	
+	EISA_bus = 1;
+
+	if (dev->num_addrs) {
+		/* newer firmware hand out the eeprom address */
+		eisa_dev.eeprom_addr = dev->addr[0];
+	} else {
+		/* old firmware, need to figure out the box */
+		if (is_mongoose(dev)) {
+			eisa_dev.eeprom_addr = SNAKES_EEPROM_BASE_ADDR;
+		} else {
+			eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR;
+		}
+	}
+	eisa_eeprom_addr = ioremap_nocache(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
+	result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space,
+			&eisa_dev.hba.lmmio_space);
+	init_eisa_pic();
+
+	if (result >= 0) {
+		/* FIXME : Don't enumerate the bus twice. */
+		eisa_dev.root.dev = &dev->dev;
+		dev_set_drvdata(&dev->dev, &eisa_dev.root);
+		eisa_dev.root.bus_base_addr = 0;
+		eisa_dev.root.res = &eisa_dev.hba.io_space;
+		eisa_dev.root.slots = result;
+		eisa_dev.root.dma_mask = 0xffffffff; /* wild guess */
+		if (eisa_root_register (&eisa_dev.root)) {
+			printk(KERN_ERR "EISA: Failed to register EISA root\n");
+			return -1;
+		}
+	}
+	
+	return 0;
+}
+
+static const struct parisc_device_id eisa_tbl[] = {
+	{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00076 }, /* Mongoose */
+	{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00090 }, /* Wax EISA */
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(parisc, eisa_tbl);
+
+static struct parisc_driver eisa_driver = {
+	.name =		"eisa_ba",
+	.id_table =	eisa_tbl,
+	.probe =	eisa_probe,
+};
+
+void __init eisa_init(void)
+{
+	register_parisc_driver(&eisa_driver);
+}
+
+
+static unsigned int eisa_irq_configured;
+void eisa_make_irq_level(int num)
+{
+	if (eisa_irq_configured& (1<<num)) {
+		printk(KERN_WARNING
+		       "IRQ %d polarity configured twice (last to level)\n", 
+		       num);
+	}
+	eisa_irq_level |= (1<<num); /* set the corresponding bit */
+	eisa_irq_configured |= (1<<num); /* set the corresponding bit */
+}
+
+void eisa_make_irq_edge(int num)
+{
+	if (eisa_irq_configured& (1<<num)) {
+		printk(KERN_WARNING 
+		       "IRQ %d polarity configured twice (last to edge)\n",
+		       num);
+	}
+	eisa_irq_level &= ~(1<<num); /* clear the corresponding bit */
+	eisa_irq_configured |= (1<<num); /* set the corresponding bit */
+}
+
+static int __init eisa_irq_setup(char *str)
+{
+	char *cur = str;
+	int val;
+
+	EISA_DBG("IRQ setup\n");
+	while (cur != NULL) {
+		char *pe;
+		
+		val = (int) simple_strtoul(cur, &pe, 0);
+		if (val > 15 || val < 0) {
+			printk(KERN_ERR "eisa: EISA irq value are 0-15\n");
+			continue;
+		}
+		if (val == 2) { 
+			val = 9;
+		}
+		eisa_make_irq_edge(val); /* clear the corresponding bit */
+		EISA_DBG("setting IRQ %d to edge-triggered mode\n", val);
+		
+		if ((cur = strchr(cur, ','))) {
+			cur++;
+		} else {
+			break;
+		}
+	}
+	return 1;
+}
+
+__setup("eisa_irq_edge=", eisa_irq_setup);
+