Linux-libre 4.7.1-gnupck-4.7.1-gnu

1 files changed, 0 insertions, 250 deletions

diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
deleted file mode 100644
index a23172ff4..000000000
--- a/drivers/phy/phy-brcmstb-sata.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Broadcom SATA3 AHCI Controller PHY Driver
- *
- * Copyright © 2009-2015 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-
-#define SATA_MDIO_BANK_OFFSET				0x23c
-#define SATA_MDIO_REG_OFFSET(ofs)			((ofs) * 4)
-
-#define MAX_PORTS					2
-
-/* Register offset between PHYs in PCB space */
-#define SATA_MDIO_REG_28NM_SPACE_SIZE			0x1000
-
-/* The older SATA PHY registers duplicated per port registers within the map,
- * rather than having a separate map per port.
- */
-#define SATA_MDIO_REG_40NM_SPACE_SIZE			0x10
-
-enum brcm_sata_phy_version {
-	BRCM_SATA_PHY_28NM,
-	BRCM_SATA_PHY_40NM,
-};
-
-struct brcm_sata_port {
-	int portnum;
-	struct phy *phy;
-	struct brcm_sata_phy *phy_priv;
-	bool ssc_en;
-};
-
-struct brcm_sata_phy {
-	struct device *dev;
-	void __iomem *phy_base;
-	enum brcm_sata_phy_version version;
-
-	struct brcm_sata_port phys[MAX_PORTS];
-};
-
-enum sata_mdio_phy_regs {
-	PLL_REG_BANK_0				= 0x50,
-	PLL_REG_BANK_0_PLLCONTROL_0		= 0x81,
-
-	TXPMD_REG_BANK				= 0x1a0,
-	TXPMD_CONTROL1				= 0x81,
-	TXPMD_CONTROL1_TX_SSC_EN_FRC		= BIT(0),
-	TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL	= BIT(1),
-	TXPMD_TX_FREQ_CTRL_CONTROL1		= 0x82,
-	TXPMD_TX_FREQ_CTRL_CONTROL2		= 0x83,
-	TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK	= 0x3ff,
-	TXPMD_TX_FREQ_CTRL_CONTROL3		= 0x84,
-	TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK	= 0x3ff,
-};
-
-static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
-{
-	struct brcm_sata_phy *priv = port->phy_priv;
-	u32 offset = 0;
-
-	if (priv->version == BRCM_SATA_PHY_28NM)
-		offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
-	else if (priv->version == BRCM_SATA_PHY_40NM)
-		offset = SATA_MDIO_REG_40NM_SPACE_SIZE;
-	else
-		dev_err(priv->dev, "invalid phy version\n");
-
-	return priv->phy_base + (port->portnum * offset);
-}
-
-static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
-			      u32 msk, u32 value)
-{
-	u32 tmp;
-
-	writel(bank, addr + SATA_MDIO_BANK_OFFSET);
-	tmp = readl(addr + SATA_MDIO_REG_OFFSET(ofs));
-	tmp = (tmp & msk) | value;
-	writel(tmp, addr + SATA_MDIO_REG_OFFSET(ofs));
-}
-
-/* These defaults were characterized by H/W group */
-#define FMIN_VAL_DEFAULT	0x3df
-#define FMAX_VAL_DEFAULT	0x3df
-#define FMAX_VAL_SSC		0x83
-
-static void brcm_sata_cfg_ssc(struct brcm_sata_port *port)
-{
-	void __iomem *base = brcm_sata_phy_base(port);
-	struct brcm_sata_phy *priv = port->phy_priv;
-	u32 tmp;
-
-	/* override the TX spread spectrum setting */
-	tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
-	brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
-
-	/* set fixed min freq */
-	brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
-			  ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
-			  FMIN_VAL_DEFAULT);
-
-	/* set fixed max freq depending on SSC config */
-	if (port->ssc_en) {
-		dev_info(priv->dev, "enabling SSC on port %d\n", port->portnum);
-		tmp = FMAX_VAL_SSC;
-	} else {
-		tmp = FMAX_VAL_DEFAULT;
-	}
-
-	brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
-			  ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
-}
-
-static int brcm_sata_phy_init(struct phy *phy)
-{
-	struct brcm_sata_port *port = phy_get_drvdata(phy);
-
-	brcm_sata_cfg_ssc(port);
-
-	return 0;
-}
-
-static const struct phy_ops phy_ops = {
-	.init		= brcm_sata_phy_init,
-	.owner		= THIS_MODULE,
-};
-
-static const struct of_device_id brcm_sata_phy_of_match[] = {
-	{ .compatible	= "brcm,bcm7445-sata-phy",
-	  .data = (void *)BRCM_SATA_PHY_28NM },
-	{ .compatible	= "brcm,bcm7425-sata-phy",
-	  .data = (void *)BRCM_SATA_PHY_40NM },
-	{},
-};
-MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
-
-static int brcm_sata_phy_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct device_node *dn = dev->of_node, *child;
-	const struct of_device_id *of_id;
-	struct brcm_sata_phy *priv;
-	struct resource *res;
-	struct phy_provider *provider;
-	int ret, count = 0;
-
-	if (of_get_child_count(dn) == 0)
-		return -ENODEV;
-
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-	dev_set_drvdata(dev, priv);
-	priv->dev = dev;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
-	priv->phy_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(priv->phy_base))
-		return PTR_ERR(priv->phy_base);
-
-	of_id = of_match_node(brcm_sata_phy_of_match, dn);
-	if (of_id)
-		priv->version = (enum brcm_sata_phy_version)of_id->data;
-	else
-		priv->version = BRCM_SATA_PHY_28NM;
-
-	for_each_available_child_of_node(dn, child) {
-		unsigned int id;
-		struct brcm_sata_port *port;
-
-		if (of_property_read_u32(child, "reg", &id)) {
-			dev_err(dev, "missing reg property in node %s\n",
-					child->name);
-			ret = -EINVAL;
-			goto put_child;
-		}
-
-		if (id >= MAX_PORTS) {
-			dev_err(dev, "invalid reg: %u\n", id);
-			ret = -EINVAL;
-			goto put_child;
-		}
-		if (priv->phys[id].phy) {
-			dev_err(dev, "already registered port %u\n", id);
-			ret = -EINVAL;
-			goto put_child;
-		}
-
-		port = &priv->phys[id];
-		port->portnum = id;
-		port->phy_priv = priv;
-		port->phy = devm_phy_create(dev, child, &phy_ops);
-		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
-		if (IS_ERR(port->phy)) {
-			dev_err(dev, "failed to create PHY\n");
-			ret = PTR_ERR(port->phy);
-			goto put_child;
-		}
-
-		phy_set_drvdata(port->phy, port);
-		count++;
-	}
-
-	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	if (IS_ERR(provider)) {
-		dev_err(dev, "could not register PHY provider\n");
-		return PTR_ERR(provider);
-	}
-
-	dev_info(dev, "registered %d port(s)\n", count);
-
-	return 0;
-put_child:
-	of_node_put(child);
-	return ret;
-}
-
-static struct platform_driver brcm_sata_phy_driver = {
-	.probe	= brcm_sata_phy_probe,
-	.driver	= {
-		.of_match_table	= brcm_sata_phy_of_match,
-		.name		= "brcmstb-sata-phy",
-	}
-};
-module_platform_driver(brcm_sata_phy_driver);
-
-MODULE_DESCRIPTION("Broadcom STB SATA PHY driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marc Carino");
-MODULE_AUTHOR("Brian Norris");
-MODULE_ALIAS("platform:phy-brcmstb-sata");