Initial import

1 files changed, 605 insertions, 0 deletions

diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
new file mode 100644
index 000000000..53f295c1b
--- /dev/null
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -0,0 +1,605 @@
+/*
+ * phy-ti-pipe3 - PIPE3 PHY driver.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/phy/phy.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include <linux/phy/omap_control_phy.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock.h>
+
+#define	PLL_STATUS		0x00000004
+#define	PLL_GO			0x00000008
+#define	PLL_CONFIGURATION1	0x0000000C
+#define	PLL_CONFIGURATION2	0x00000010
+#define	PLL_CONFIGURATION3	0x00000014
+#define	PLL_CONFIGURATION4	0x00000020
+
+#define	PLL_REGM_MASK		0x001FFE00
+#define	PLL_REGM_SHIFT		0x9
+#define	PLL_REGM_F_MASK		0x0003FFFF
+#define	PLL_REGM_F_SHIFT	0x0
+#define	PLL_REGN_MASK		0x000001FE
+#define	PLL_REGN_SHIFT		0x1
+#define	PLL_SELFREQDCO_MASK	0x0000000E
+#define	PLL_SELFREQDCO_SHIFT	0x1
+#define	PLL_SD_MASK		0x0003FC00
+#define	PLL_SD_SHIFT		10
+#define	SET_PLL_GO		0x1
+#define PLL_LDOPWDN		BIT(15)
+#define PLL_TICOPWDN		BIT(16)
+#define	PLL_LOCK		0x2
+#define	PLL_IDLE		0x1
+
+/*
+ * This is an Empirical value that works, need to confirm the actual
+ * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
+ * to be correctly reflected in the PIPE3PHY_PLL_STATUS register.
+ */
+#define PLL_IDLE_TIME	100	/* in milliseconds */
+#define PLL_LOCK_TIME	100	/* in milliseconds */
+
+struct pipe3_dpll_params {
+	u16	m;
+	u8	n;
+	u8	freq:3;
+	u8	sd;
+	u32	mf;
+};
+
+struct pipe3_dpll_map {
+	unsigned long rate;
+	struct pipe3_dpll_params params;
+};
+
+struct ti_pipe3 {
+	void __iomem		*pll_ctrl_base;
+	struct device		*dev;
+	struct device		*control_dev;
+	struct clk		*wkupclk;
+	struct clk		*sys_clk;
+	struct clk		*refclk;
+	struct clk		*div_clk;
+	struct pipe3_dpll_map	*dpll_map;
+	bool			enabled;
+	spinlock_t		lock;	/* serialize clock enable/disable */
+	/* the below flag is needed specifically for SATA */
+	bool			refclk_enabled;
+};
+
+static struct pipe3_dpll_map dpll_map_usb[] = {
+	{12000000, {1250, 5, 4, 20, 0} },	/* 12 MHz */
+	{16800000, {3125, 20, 4, 20, 0} },	/* 16.8 MHz */
+	{19200000, {1172, 8, 4, 20, 65537} },	/* 19.2 MHz */
+	{20000000, {1000, 7, 4, 10, 0} },	/* 20 MHz */
+	{26000000, {1250, 12, 4, 20, 0} },	/* 26 MHz */
+	{38400000, {3125, 47, 4, 20, 92843} },	/* 38.4 MHz */
+	{ },					/* Terminator */
+};
+
+static struct pipe3_dpll_map dpll_map_sata[] = {
+	{12000000, {1000, 7, 4, 6, 0} },	/* 12 MHz */
+	{16800000, {714, 7, 4, 6, 0} },		/* 16.8 MHz */
+	{19200000, {625, 7, 4, 6, 0} },		/* 19.2 MHz */
+	{20000000, {600, 7, 4, 6, 0} },		/* 20 MHz */
+	{26000000, {461, 7, 4, 6, 0} },		/* 26 MHz */
+	{38400000, {312, 7, 4, 6, 0} },		/* 38.4 MHz */
+	{ },					/* Terminator */
+};
+
+static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
+{
+	return __raw_readl(addr + offset);
+}
+
+static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset,
+	u32 data)
+{
+	__raw_writel(data, addr + offset);
+}
+
+static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
+{
+	unsigned long rate;
+	struct pipe3_dpll_map *dpll_map = phy->dpll_map;
+
+	rate = clk_get_rate(phy->sys_clk);
+
+	for (; dpll_map->rate; dpll_map++) {
+		if (rate == dpll_map->rate)
+			return &dpll_map->params;
+	}
+
+	dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);
+
+	return NULL;
+}
+
+static int ti_pipe3_power_off(struct phy *x)
+{
+	struct ti_pipe3 *phy = phy_get_drvdata(x);
+
+	omap_control_phy_power(phy->control_dev, 0);
+
+	return 0;
+}
+
+static int ti_pipe3_power_on(struct phy *x)
+{
+	struct ti_pipe3 *phy = phy_get_drvdata(x);
+
+	omap_control_phy_power(phy->control_dev, 1);
+
+	return 0;
+}
+
+static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
+{
+	u32		val;
+	unsigned long	timeout;
+
+	timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME);
+	do {
+		cpu_relax();
+		val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+		if (val & PLL_LOCK)
+			return 0;
+	} while (!time_after(jiffies, timeout));
+
+	dev_err(phy->dev, "DPLL failed to lock\n");
+	return -EBUSY;
+}
+
+static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
+{
+	u32			val;
+	struct pipe3_dpll_params *dpll_params;
+
+	dpll_params = ti_pipe3_get_dpll_params(phy);
+	if (!dpll_params)
+		return -EINVAL;
+
+	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+	val &= ~PLL_REGN_MASK;
+	val |= dpll_params->n << PLL_REGN_SHIFT;
+	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+	val &= ~PLL_SELFREQDCO_MASK;
+	val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
+	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+	val &= ~PLL_REGM_MASK;
+	val |= dpll_params->m << PLL_REGM_SHIFT;
+	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
+	val &= ~PLL_REGM_F_MASK;
+	val |= dpll_params->mf << PLL_REGM_F_SHIFT;
+	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
+
+	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
+	val &= ~PLL_SD_MASK;
+	val |= dpll_params->sd << PLL_SD_SHIFT;
+	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
+
+	ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
+
+	return ti_pipe3_dpll_wait_lock(phy);
+}
+
+static int ti_pipe3_init(struct phy *x)
+{
+	struct ti_pipe3 *phy = phy_get_drvdata(x);
+	u32 val;
+	int ret = 0;
+
+	/*
+	 * Set pcie_pcs register to 0x96 for proper functioning of phy
+	 * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
+	 * 18-1804.
+	 */
+	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
+		omap_control_pcie_pcs(phy->control_dev, 0x96);
+		return 0;
+	}
+
+	/* Bring it out of IDLE if it is IDLE */
+	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+	if (val & PLL_IDLE) {
+		val &= ~PLL_IDLE;
+		ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+		ret = ti_pipe3_dpll_wait_lock(phy);
+	}
+
+	/* Program the DPLL only if not locked */
+	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+	if (!(val & PLL_LOCK))
+		if (ti_pipe3_dpll_program(phy))
+			return -EINVAL;
+
+	return ret;
+}
+
+static int ti_pipe3_exit(struct phy *x)
+{
+	struct ti_pipe3 *phy = phy_get_drvdata(x);
+	u32 val;
+	unsigned long timeout;
+
+	/* SATA DPLL can't be powered down due to Errata i783 and PCIe
+	 * does not have internal DPLL
+	 */
+	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") ||
+	    of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie"))
+		return 0;
+
+	/* Put DPLL in IDLE mode */
+	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+	val |= PLL_IDLE;
+	ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+	/* wait for LDO and Oscillator to power down */
+	timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
+	do {
+		cpu_relax();
+		val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+		if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
+			break;
+	} while (!time_after(jiffies, timeout));
+
+	if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
+		dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
+			val);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+static struct phy_ops ops = {
+	.init		= ti_pipe3_init,
+	.exit		= ti_pipe3_exit,
+	.power_on	= ti_pipe3_power_on,
+	.power_off	= ti_pipe3_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id ti_pipe3_id_table[];
+
+static int ti_pipe3_probe(struct platform_device *pdev)
+{
+	struct ti_pipe3 *phy;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *control_node;
+	struct platform_device *control_pdev;
+	const struct of_device_id *match;
+	struct clk *clk;
+
+	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->dev		= &pdev->dev;
+	spin_lock_init(&phy->lock);
+
+	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+		match = of_match_device(ti_pipe3_id_table, &pdev->dev);
+		if (!match)
+			return -EINVAL;
+
+		phy->dpll_map = (struct pipe3_dpll_map *)match->data;
+		if (!phy->dpll_map) {
+			dev_err(&pdev->dev, "no DPLL data\n");
+			return -EINVAL;
+		}
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						   "pll_ctrl");
+		phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(phy->pll_ctrl_base))
+			return PTR_ERR(phy->pll_ctrl_base);
+
+		phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
+		if (IS_ERR(phy->sys_clk)) {
+			dev_err(&pdev->dev, "unable to get sysclk\n");
+			return -EINVAL;
+		}
+	}
+
+	phy->refclk = devm_clk_get(phy->dev, "refclk");
+	if (IS_ERR(phy->refclk)) {
+		dev_err(&pdev->dev, "unable to get refclk\n");
+		/* older DTBs have missing refclk in SATA PHY
+		 * so don't bail out in case of SATA PHY.
+		 */
+		if (!of_device_is_compatible(node, "ti,phy-pipe3-sata"))
+			return PTR_ERR(phy->refclk);
+	}
+
+	if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+		phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
+		if (IS_ERR(phy->wkupclk)) {
+			dev_err(&pdev->dev, "unable to get wkupclk\n");
+			return PTR_ERR(phy->wkupclk);
+		}
+	} else {
+		phy->wkupclk = ERR_PTR(-ENODEV);
+	}
+
+	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+
+		clk = devm_clk_get(phy->dev, "dpll_ref");
+		if (IS_ERR(clk)) {
+			dev_err(&pdev->dev, "unable to get dpll ref clk\n");
+			return PTR_ERR(clk);
+		}
+		clk_set_rate(clk, 1500000000);
+
+		clk = devm_clk_get(phy->dev, "dpll_ref_m2");
+		if (IS_ERR(clk)) {
+			dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n");
+			return PTR_ERR(clk);
+		}
+		clk_set_rate(clk, 100000000);
+
+		clk = devm_clk_get(phy->dev, "phy-div");
+		if (IS_ERR(clk)) {
+			dev_err(&pdev->dev, "unable to get phy-div clk\n");
+			return PTR_ERR(clk);
+		}
+		clk_set_rate(clk, 100000000);
+
+		phy->div_clk = devm_clk_get(phy->dev, "div-clk");
+		if (IS_ERR(phy->div_clk)) {
+			dev_err(&pdev->dev, "unable to get div-clk\n");
+			return PTR_ERR(phy->div_clk);
+		}
+	} else {
+		phy->div_clk = ERR_PTR(-ENODEV);
+	}
+
+	control_node = of_parse_phandle(node, "ctrl-module", 0);
+	if (!control_node) {
+		dev_err(&pdev->dev, "Failed to get control device phandle\n");
+		return -EINVAL;
+	}
+
+	control_pdev = of_find_device_by_node(control_node);
+	if (!control_pdev) {
+		dev_err(&pdev->dev, "Failed to get control device\n");
+		return -EINVAL;
+	}
+
+	phy->control_dev = &control_pdev->dev;
+
+	omap_control_phy_power(phy->control_dev, 0);
+
+	platform_set_drvdata(pdev, phy);
+	pm_runtime_enable(phy->dev);
+
+	generic_phy = devm_phy_create(phy->dev, NULL, &ops);
+	if (IS_ERR(generic_phy))
+		return PTR_ERR(generic_phy);
+
+	phy_set_drvdata(generic_phy, phy);
+	phy_provider = devm_of_phy_provider_register(phy->dev,
+			of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	pm_runtime_get(&pdev->dev);
+
+	return 0;
+}
+
+static int ti_pipe3_remove(struct platform_device *pdev)
+{
+	if (!pm_runtime_suspended(&pdev->dev))
+		pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ti_pipe3_enable_refclk(struct ti_pipe3 *phy)
+{
+	if (!IS_ERR(phy->refclk) && !phy->refclk_enabled) {
+		int ret;
+
+		ret = clk_prepare_enable(phy->refclk);
+		if (ret) {
+			dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
+			return ret;
+		}
+		phy->refclk_enabled = true;
+	}
+
+	return 0;
+}
+
+static void ti_pipe3_disable_refclk(struct ti_pipe3 *phy)
+{
+	if (!IS_ERR(phy->refclk))
+		clk_disable_unprepare(phy->refclk);
+
+	phy->refclk_enabled = false;
+}
+
+static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&phy->lock, flags);
+	if (phy->enabled)
+		goto err1;
+
+	ret = ti_pipe3_enable_refclk(phy);
+	if (ret)
+		goto err1;
+
+	if (!IS_ERR(phy->wkupclk)) {
+		ret = clk_prepare_enable(phy->wkupclk);
+		if (ret) {
+			dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+			goto err2;
+		}
+	}
+
+	if (!IS_ERR(phy->div_clk)) {
+		ret = clk_prepare_enable(phy->div_clk);
+		if (ret) {
+			dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
+			goto err3;
+		}
+	}
+
+	phy->enabled = true;
+	spin_unlock_irqrestore(&phy->lock, flags);
+	return 0;
+
+err3:
+	if (!IS_ERR(phy->wkupclk))
+		clk_disable_unprepare(phy->wkupclk);
+
+err2:
+	if (!IS_ERR(phy->refclk))
+		clk_disable_unprepare(phy->refclk);
+
+	ti_pipe3_disable_refclk(phy);
+err1:
+	spin_unlock_irqrestore(&phy->lock, flags);
+	return ret;
+}
+
+static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&phy->lock, flags);
+	if (!phy->enabled) {
+		spin_unlock_irqrestore(&phy->lock, flags);
+		return;
+	}
+
+	if (!IS_ERR(phy->wkupclk))
+		clk_disable_unprepare(phy->wkupclk);
+	/* Don't disable refclk for SATA PHY due to Errata i783 */
+	if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
+		ti_pipe3_disable_refclk(phy);
+	if (!IS_ERR(phy->div_clk))
+		clk_disable_unprepare(phy->div_clk);
+	phy->enabled = false;
+	spin_unlock_irqrestore(&phy->lock, flags);
+}
+
+static int ti_pipe3_runtime_suspend(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+
+	ti_pipe3_disable_clocks(phy);
+	return 0;
+}
+
+static int ti_pipe3_runtime_resume(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = ti_pipe3_enable_clocks(phy);
+	return ret;
+}
+
+static int ti_pipe3_suspend(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+
+	ti_pipe3_disable_clocks(phy);
+	return 0;
+}
+
+static int ti_pipe3_resume(struct device *dev)
+{
+	struct ti_pipe3	*phy = dev_get_drvdata(dev);
+	int ret;
+
+	ret = ti_pipe3_enable_clocks(phy);
+	if (ret)
+		return ret;
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops ti_pipe3_pm_ops = {
+	SET_RUNTIME_PM_OPS(ti_pipe3_runtime_suspend,
+			   ti_pipe3_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume)
+};
+
+static const struct of_device_id ti_pipe3_id_table[] = {
+	{
+		.compatible = "ti,phy-usb3",
+		.data = dpll_map_usb,
+	},
+	{
+		.compatible = "ti,omap-usb3",
+		.data = dpll_map_usb,
+	},
+	{
+		.compatible = "ti,phy-pipe3-sata",
+		.data = dpll_map_sata,
+	},
+	{
+		.compatible = "ti,phy-pipe3-pcie",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, ti_pipe3_id_table);
+
+static struct platform_driver ti_pipe3_driver = {
+	.probe		= ti_pipe3_probe,
+	.remove		= ti_pipe3_remove,
+	.driver		= {
+		.name	= "ti-pipe3",
+		.pm	= &ti_pipe3_pm_ops,
+		.of_match_table = ti_pipe3_id_table,
+	},
+};
+
+module_platform_driver(ti_pipe3_driver);
+
+MODULE_ALIAS("platform:ti_pipe3");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("TI PIPE3 phy driver");
+MODULE_LICENSE("GPL v2");