Linux-libre 4.6.2-gnu

3 files changed, 133 insertions, 70 deletions

diff --git a/drivers/platform/goldfish/Kconfig b/drivers/platform/goldfish/Kconfig
index 635ef25cc..fefbb8370 100644
--- a/drivers/platform/goldfish/Kconfig
+++ b/drivers/platform/goldfish/Kconfig
@@ -1,5 +1,24 @@
+menuconfig GOLDFISH
+	bool "Platform support for Goldfish virtual devices"
+	depends on X86_32 || X86_64 || ARM || ARM64 || MIPS
+	depends on HAS_IOMEM
+	---help---
+	  Say Y here to get to see options for the Goldfish virtual platform.
+	  This option alone does not add any kernel code.
+
+	  Unless you are building for the Android Goldfish emulator say N here.
+
+if GOLDFISH
+
+config GOLDFISH_BUS
+	bool "Goldfish platform bus"
+	---help---
+	  This is a virtual bus to host Goldfish Android Virtual Devices.
+
 config GOLDFISH_PIPE
 	tristate "Goldfish virtual device for QEMU pipes"
 	---help---
 	  This is a virtual device to drive the QEMU pipe interface used by
 	  the Goldfish Android Virtual Device.
+
+endif # GOLDFISH
diff --git a/drivers/platform/goldfish/Makefile b/drivers/platform/goldfish/Makefile
index a0022395e..d34871258 100644
--- a/drivers/platform/goldfish/Makefile
+++ b/drivers/platform/goldfish/Makefile
@@ -1,5 +1,5 @@
 #
 # Makefile for Goldfish platform specific drivers
 #
-obj-$(CONFIG_GOLDFISH)	+=	pdev_bus.o
+obj-$(CONFIG_GOLDFISH_BUS)	+= pdev_bus.o
 obj-$(CONFIG_GOLDFISH_PIPE)	+= goldfish_pipe.o
diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index e7a29e275..07462d79d 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -2,6 +2,7 @@
  * Copyright (C) 2011 Google, Inc.
  * Copyright (C) 2012 Intel, Inc.
  * Copyright (C) 2013 Intel, Inc.
+ * Copyright (C) 2014 Linaro Limited
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -57,6 +58,9 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/goldfish.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/acpi.h>
 
 /*
  * IMPORTANT: The following constants must match the ones used and defined
@@ -75,6 +79,7 @@
 #define PIPE_REG_PARAMS_ADDR_LOW	0x18  /* read/write: batch data address */
 #define PIPE_REG_PARAMS_ADDR_HIGH	0x1c  /* read/write: batch data address */
 #define PIPE_REG_ACCESS_PARAMS		0x20  /* write: batch access */
+#define PIPE_REG_VERSION		0x24  /* read: device version */
 
 /* list of commands for PIPE_REG_COMMAND */
 #define CMD_OPEN			1  /* open new channel */
@@ -90,12 +95,6 @@
 #define CMD_WRITE_BUFFER	4  /* send a user buffer to the emulator */
 #define CMD_WAKE_ON_WRITE	5  /* tell the emulator to wake us when writing
 				     is possible */
-
-/* The following commands are related to read operations, they must be
- * listed in the same order than the corresponding write ones, since we
- * will use (CMD_READ_BUFFER - CMD_WRITE_BUFFER) as a special offset
- * in goldfish_pipe_read_write() below.
- */
 #define CMD_READ_BUFFER        6  /* receive a user buffer from the emulator */
 #define CMD_WAKE_ON_READ       7  /* tell the emulator to wake us when reading
 				   * is possible */
@@ -130,6 +129,7 @@ struct goldfish_pipe_dev {
 	unsigned char __iomem *base;
 	struct access_params *aps;
 	int irq;
+	u32 version;
 };
 
 static struct goldfish_pipe_dev   pipe_dev[1];
@@ -217,17 +217,16 @@ static int valid_batchbuffer_addr(struct goldfish_pipe_dev *dev,
 static int setup_access_params_addr(struct platform_device *pdev,
 					struct goldfish_pipe_dev *dev)
 {
-	u64 paddr;
+	dma_addr_t dma_handle;
 	struct access_params *aps;
 
-	aps = devm_kzalloc(&pdev->dev, sizeof(struct access_params), GFP_KERNEL);
+	aps = dmam_alloc_coherent(&pdev->dev, sizeof(struct access_params),
+				  &dma_handle, GFP_KERNEL);
 	if (!aps)
-		return -1;
+		return -ENOMEM;
 
-	/* FIXME */
-	paddr = __pa(aps);
-	writel((u32)(paddr >> 32), dev->base + PIPE_REG_PARAMS_ADDR_HIGH);
-	writel((u32)paddr, dev->base + PIPE_REG_PARAMS_ADDR_LOW);
+	writel(upper_32_bits(dma_handle), dev->base + PIPE_REG_PARAMS_ADDR_HIGH);
+	writel(lower_32_bits(dma_handle), dev->base + PIPE_REG_PARAMS_ADDR_LOW);
 
 	if (valid_batchbuffer_addr(dev, aps)) {
 		dev->aps = aps;
@@ -263,19 +262,14 @@ static int access_with_param(struct goldfish_pipe_dev *dev, const int cmd,
 	return 0;
 }
 
-/* This function is used for both reading from and writing to a given
- * pipe.
- */
 static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
-				    size_t bufflen, int is_write)
+				       size_t bufflen, int is_write)
 {
 	unsigned long irq_flags;
 	struct goldfish_pipe *pipe = filp->private_data;
 	struct goldfish_pipe_dev *dev = pipe->dev;
-	const int cmd_offset = is_write ? 0
-					: (CMD_READ_BUFFER - CMD_WRITE_BUFFER);
 	unsigned long address, address_end;
-	int ret = 0;
+	int count = 0, ret = -EINVAL;
 
 	/* If the emulator already closed the pipe, no need to go further */
 	if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags))
@@ -298,79 +292,106 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 	address_end = address + bufflen;
 
 	while (address < address_end) {
-		unsigned long  page_end = (address & PAGE_MASK) + PAGE_SIZE;
-		unsigned long  next     = page_end < address_end ? page_end
-								 : address_end;
-		unsigned long  avail    = next - address;
+		unsigned long page_end = (address & PAGE_MASK) + PAGE_SIZE;
+		unsigned long next     = page_end < address_end ? page_end
+								: address_end;
+		unsigned long avail    = next - address;
 		int status, wakeBit;
+		struct page *page;
+
+		/* Either vaddr or paddr depending on the device version */
+		unsigned long xaddr;
+
+		/*
+		 * We grab the pages on a page-by-page basis in case user
+		 * space gives us a potentially huge buffer but the read only
+		 * returns a small amount, then there's no need to pin that
+		 * much memory to the process.
+		 */
+		down_read(&current->mm->mmap_sem);
+		ret = get_user_pages(address, 1, !is_write, 0, &page, NULL);
+		up_read(&current->mm->mmap_sem);
+		if (ret < 0)
+			break;
 
-		/* Ensure that the corresponding page is properly mapped */
-		/* FIXME: this isn't safe or sufficient - use get_user_pages */
-		if (is_write) {
-			char c;
-			/* Ensure that the page is mapped and readable */
-			if (__get_user(c, (char __user *)address)) {
-				if (!ret)
-					ret = -EFAULT;
-				break;
-			}
+		if (dev->version) {
+			/* Device version 1 or newer (qemu-android) expects the
+			 * physical address.
+			 */
+			xaddr = page_to_phys(page) | (address & ~PAGE_MASK);
 		} else {
-			/* Ensure that the page is mapped and writable */
-			if (__put_user(0, (char __user *)address)) {
-				if (!ret)
-					ret = -EFAULT;
-				break;
-			}
+			/* Device version 0 (classic emulator) expects the
+			 * virtual address.
+			 */
+			xaddr = address;
 		}
 
 		/* Now, try to transfer the bytes in the current page */
 		spin_lock_irqsave(&dev->lock, irq_flags);
-		if (access_with_param(dev, CMD_WRITE_BUFFER + cmd_offset,
-				address, avail, pipe, &status)) {
+		if (access_with_param(dev,
+				is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER,
+				xaddr, avail, pipe, &status)) {
 			gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL,
 				     dev->base + PIPE_REG_CHANNEL_HIGH);
 			writel(avail, dev->base + PIPE_REG_SIZE);
-			gf_write_ptr((void *)address,
+			gf_write_ptr((void *)xaddr,
 				     dev->base + PIPE_REG_ADDRESS,
 				     dev->base + PIPE_REG_ADDRESS_HIGH);
-			writel(CMD_WRITE_BUFFER + cmd_offset,
+			writel(is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER,
 					dev->base + PIPE_REG_COMMAND);
 			status = readl(dev->base + PIPE_REG_STATUS);
 		}
 		spin_unlock_irqrestore(&dev->lock, irq_flags);
 
+		if (status > 0 && !is_write)
+			set_page_dirty(page);
+		put_page(page);
+
 		if (status > 0) { /* Correct transfer */
-			ret += status;
+			count += status;
 			address += status;
 			continue;
-		}
-
-		if (status == 0)  /* EOF */
+		} else if (status == 0) { /* EOF */
+			ret = 0;
 			break;
-
-		/* An error occured. If we already transfered stuff, just
-		* return with its count. We expect the next call to return
-		* an error code */
-		if (ret > 0)
+		} else if (status < 0 && count > 0) {
+			/*
+			 * An error occurred and we already transferred
+			 * something on one of the previous pages.
+			 * Just return what we already copied and log this
+			 * err.
+			 *
+			 * Note: This seems like an incorrect approach but
+			 * cannot change it until we check if any user space
+			 * ABI relies on this behavior.
+			 */
+			if (status != PIPE_ERROR_AGAIN)
+				pr_info_ratelimited("goldfish_pipe: backend returned error %d on %s\n",
+					status, is_write ? "write" : "read");
+			ret = 0;
 			break;
+		}
 
-		/* If the error is not PIPE_ERROR_AGAIN, or if we are not in
-		* non-blocking mode, just return the error code.
-		*/
+		/*
+		 * If the error is not PIPE_ERROR_AGAIN, or if we are not in
+		 * non-blocking mode, just return the error code.
+		 */
 		if (status != PIPE_ERROR_AGAIN ||
 			(filp->f_flags & O_NONBLOCK) != 0) {
 			ret = goldfish_pipe_error_convert(status);
 			break;
 		}
 
-		/* We will have to wait until more data/space is available.
-		* First, mark the pipe as waiting for a specific wake signal.
-		*/
+		/*
+		 * The backend blocked the read/write, wait until the backend
+		 * tells us it's ready to process more data.
+		 */
 		wakeBit = is_write ? BIT_WAKE_ON_WRITE : BIT_WAKE_ON_READ;
 		set_bit(wakeBit, &pipe->flags);
 
 		/* Tell the emulator we're going to wait for a wake event */
-		goldfish_cmd(pipe, CMD_WAKE_ON_WRITE + cmd_offset);
+		goldfish_cmd(pipe,
+			is_write ? CMD_WAKE_ON_WRITE : CMD_WAKE_ON_READ);
 
 		/* Unlock the pipe, then wait for the wake signal */
 		mutex_unlock(&pipe->lock);
@@ -388,12 +409,13 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
 		/* Try to re-acquire the lock */
 		if (mutex_lock_interruptible(&pipe->lock))
 			return -ERESTARTSYS;
-
-		/* Try the transfer again */
-		continue;
 	}
 	mutex_unlock(&pipe->lock);
-	return ret;
+
+	if (ret < 0)
+		return ret;
+	else
+		return count;
 }
 
 static ssize_t goldfish_pipe_read(struct file *filp, char __user *buffer,
@@ -446,10 +468,11 @@ static irqreturn_t goldfish_pipe_interrupt(int irq, void *dev_id)
 	unsigned long irq_flags;
 	int count = 0;
 
-	/* We're going to read from the emulator a list of (channel,flags)
-	* pairs corresponding to the wake events that occured on each
-	* blocked pipe (i.e. channel).
-	*/
+	/*
+	 * We're going to read from the emulator a list of (channel,flags)
+	 * pairs corresponding to the wake events that occurred on each
+	 * blocked pipe (i.e. channel).
+	 */
 	spin_lock_irqsave(&dev->lock, irq_flags);
 	for (;;) {
 		/* First read the channel, 0 means the end of the list */
@@ -600,6 +623,12 @@ static int goldfish_pipe_probe(struct platform_device *pdev)
 		goto error;
 	}
 	setup_access_params_addr(pdev, dev);
+
+	/* Although the pipe device in the classic Android emulator does not
+	 * recognize the 'version' register, it won't treat this as an error
+	 * either and will simply return 0, which is fine.
+	 */
+	dev->version = readl(dev->base + PIPE_REG_VERSION);
 	return 0;
 
 error:
@@ -615,11 +644,26 @@ static int goldfish_pipe_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct acpi_device_id goldfish_pipe_acpi_match[] = {
+	{ "GFSH0003", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, goldfish_pipe_acpi_match);
+
+static const struct of_device_id goldfish_pipe_of_match[] = {
+	{ .compatible = "google,android-pipe", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, goldfish_pipe_of_match);
+
 static struct platform_driver goldfish_pipe = {
 	.probe = goldfish_pipe_probe,
 	.remove = goldfish_pipe_remove,
 	.driver = {
-		.name = "goldfish_pipe"
+		.name = "goldfish_pipe",
+		.owner = THIS_MODULE,
+		.of_match_table = goldfish_pipe_of_match,
+		.acpi_match_table = ACPI_PTR(goldfish_pipe_acpi_match),
 	}
 };