summaryrefslogtreecommitdiff
path: root/drivers/platform/goldfish
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-06-10 05:30:17 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-06-10 05:30:17 -0300
commitd635711daa98be86d4c7fd01499c34f566b54ccb (patch)
treeaa5cc3760a27c3d57146498cb82fa549547de06c /drivers/platform/goldfish
parentc91265cd0efb83778f015b4d4b1129bd2cfd075e (diff)
Linux-libre 4.6.2-gnu
Diffstat (limited to 'drivers/platform/goldfish')
-rw-r--r--drivers/platform/goldfish/Kconfig19
-rw-r--r--drivers/platform/goldfish/Makefile2
-rw-r--r--drivers/platform/goldfish/goldfish_pipe.c182
3 files changed, 133 insertions, 70 deletions
diff --git a/drivers/platform/goldfish/Kconfig b/drivers/platform/goldfish/Kconfig
index 635ef25cc..fefbb8370 100644
--- a/drivers/platform/goldfish/Kconfig
+++ b/drivers/platform/goldfish/Kconfig
@@ -1,5 +1,24 @@
+menuconfig GOLDFISH
+ bool "Platform support for Goldfish virtual devices"
+ depends on X86_32 || X86_64 || ARM || ARM64 || MIPS
+ depends on HAS_IOMEM
+ ---help---
+ Say Y here to get to see options for the Goldfish virtual platform.
+ This option alone does not add any kernel code.
+
+ Unless you are building for the Android Goldfish emulator say N here.
+
+if GOLDFISH
+
+config GOLDFISH_BUS
+ bool "Goldfish platform bus"
+ ---help---
+ This is a virtual bus to host Goldfish Android Virtual Devices.
+
config GOLDFISH_PIPE
tristate "Goldfish virtual device for QEMU pipes"
---help---
This is a virtual device to drive the QEMU pipe interface used by
the Goldfish Android Virtual Device.
+
+endif # GOLDFISH
diff --git a/drivers/platform/goldfish/Makefile b/drivers/platform/goldfish/Makefile
index a0022395e..d34871258 100644
--- a/drivers/platform/goldfish/Makefile
+++ b/drivers/platform/goldfish/Makefile
@@ -1,5 +1,5 @@
#
# Makefile for Goldfish platform specific drivers
#
-obj-$(CONFIG_GOLDFISH) += pdev_bus.o
+obj-$(CONFIG_GOLDFISH_BUS) += pdev_bus.o
obj-$(CONFIG_GOLDFISH_PIPE) += goldfish_pipe.o
diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index e7a29e275..07462d79d 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -2,6 +2,7 @@
* Copyright (C) 2011 Google, Inc.
* Copyright (C) 2012 Intel, Inc.
* Copyright (C) 2013 Intel, Inc.
+ * Copyright (C) 2014 Linaro Limited
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -57,6 +58,9 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/goldfish.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/acpi.h>
/*
* IMPORTANT: The following constants must match the ones used and defined
@@ -75,6 +79,7 @@
#define PIPE_REG_PARAMS_ADDR_LOW 0x18 /* read/write: batch data address */
#define PIPE_REG_PARAMS_ADDR_HIGH 0x1c /* read/write: batch data address */
#define PIPE_REG_ACCESS_PARAMS 0x20 /* write: batch access */
+#define PIPE_REG_VERSION 0x24 /* read: device version */
/* list of commands for PIPE_REG_COMMAND */
#define CMD_OPEN 1 /* open new channel */
@@ -90,12 +95,6 @@
#define CMD_WRITE_BUFFER 4 /* send a user buffer to the emulator */
#define CMD_WAKE_ON_WRITE 5 /* tell the emulator to wake us when writing
is possible */
-
-/* The following commands are related to read operations, they must be
- * listed in the same order than the corresponding write ones, since we
- * will use (CMD_READ_BUFFER - CMD_WRITE_BUFFER) as a special offset
- * in goldfish_pipe_read_write() below.
- */
#define CMD_READ_BUFFER 6 /* receive a user buffer from the emulator */
#define CMD_WAKE_ON_READ 7 /* tell the emulator to wake us when reading
* is possible */
@@ -130,6 +129,7 @@ struct goldfish_pipe_dev {
unsigned char __iomem *base;
struct access_params *aps;
int irq;
+ u32 version;
};
static struct goldfish_pipe_dev pipe_dev[1];
@@ -217,17 +217,16 @@ static int valid_batchbuffer_addr(struct goldfish_pipe_dev *dev,
static int setup_access_params_addr(struct platform_device *pdev,
struct goldfish_pipe_dev *dev)
{
- u64 paddr;
+ dma_addr_t dma_handle;
struct access_params *aps;
- aps = devm_kzalloc(&pdev->dev, sizeof(struct access_params), GFP_KERNEL);
+ aps = dmam_alloc_coherent(&pdev->dev, sizeof(struct access_params),
+ &dma_handle, GFP_KERNEL);
if (!aps)
- return -1;
+ return -ENOMEM;
- /* FIXME */
- paddr = __pa(aps);
- writel((u32)(paddr >> 32), dev->base + PIPE_REG_PARAMS_ADDR_HIGH);
- writel((u32)paddr, dev->base + PIPE_REG_PARAMS_ADDR_LOW);
+ writel(upper_32_bits(dma_handle), dev->base + PIPE_REG_PARAMS_ADDR_HIGH);
+ writel(lower_32_bits(dma_handle), dev->base + PIPE_REG_PARAMS_ADDR_LOW);
if (valid_batchbuffer_addr(dev, aps)) {
dev->aps = aps;
@@ -263,19 +262,14 @@ static int access_with_param(struct goldfish_pipe_dev *dev, const int cmd,
return 0;
}
-/* This function is used for both reading from and writing to a given
- * pipe.
- */
static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
- size_t bufflen, int is_write)
+ size_t bufflen, int is_write)
{
unsigned long irq_flags;
struct goldfish_pipe *pipe = filp->private_data;
struct goldfish_pipe_dev *dev = pipe->dev;
- const int cmd_offset = is_write ? 0
- : (CMD_READ_BUFFER - CMD_WRITE_BUFFER);
unsigned long address, address_end;
- int ret = 0;
+ int count = 0, ret = -EINVAL;
/* If the emulator already closed the pipe, no need to go further */
if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags))
@@ -298,79 +292,106 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
address_end = address + bufflen;
while (address < address_end) {
- unsigned long page_end = (address & PAGE_MASK) + PAGE_SIZE;
- unsigned long next = page_end < address_end ? page_end
- : address_end;
- unsigned long avail = next - address;
+ unsigned long page_end = (address & PAGE_MASK) + PAGE_SIZE;
+ unsigned long next = page_end < address_end ? page_end
+ : address_end;
+ unsigned long avail = next - address;
int status, wakeBit;
+ struct page *page;
+
+ /* Either vaddr or paddr depending on the device version */
+ unsigned long xaddr;
+
+ /*
+ * We grab the pages on a page-by-page basis in case user
+ * space gives us a potentially huge buffer but the read only
+ * returns a small amount, then there's no need to pin that
+ * much memory to the process.
+ */
+ down_read(&current->mm->mmap_sem);
+ ret = get_user_pages(address, 1, !is_write, 0, &page, NULL);
+ up_read(&current->mm->mmap_sem);
+ if (ret < 0)
+ break;
- /* Ensure that the corresponding page is properly mapped */
- /* FIXME: this isn't safe or sufficient - use get_user_pages */
- if (is_write) {
- char c;
- /* Ensure that the page is mapped and readable */
- if (__get_user(c, (char __user *)address)) {
- if (!ret)
- ret = -EFAULT;
- break;
- }
+ if (dev->version) {
+ /* Device version 1 or newer (qemu-android) expects the
+ * physical address.
+ */
+ xaddr = page_to_phys(page) | (address & ~PAGE_MASK);
} else {
- /* Ensure that the page is mapped and writable */
- if (__put_user(0, (char __user *)address)) {
- if (!ret)
- ret = -EFAULT;
- break;
- }
+ /* Device version 0 (classic emulator) expects the
+ * virtual address.
+ */
+ xaddr = address;
}
/* Now, try to transfer the bytes in the current page */
spin_lock_irqsave(&dev->lock, irq_flags);
- if (access_with_param(dev, CMD_WRITE_BUFFER + cmd_offset,
- address, avail, pipe, &status)) {
+ if (access_with_param(dev,
+ is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER,
+ xaddr, avail, pipe, &status)) {
gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL,
dev->base + PIPE_REG_CHANNEL_HIGH);
writel(avail, dev->base + PIPE_REG_SIZE);
- gf_write_ptr((void *)address,
+ gf_write_ptr((void *)xaddr,
dev->base + PIPE_REG_ADDRESS,
dev->base + PIPE_REG_ADDRESS_HIGH);
- writel(CMD_WRITE_BUFFER + cmd_offset,
+ writel(is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER,
dev->base + PIPE_REG_COMMAND);
status = readl(dev->base + PIPE_REG_STATUS);
}
spin_unlock_irqrestore(&dev->lock, irq_flags);
+ if (status > 0 && !is_write)
+ set_page_dirty(page);
+ put_page(page);
+
if (status > 0) { /* Correct transfer */
- ret += status;
+ count += status;
address += status;
continue;
- }
-
- if (status == 0) /* EOF */
+ } else if (status == 0) { /* EOF */
+ ret = 0;
break;
-
- /* An error occured. If we already transfered stuff, just
- * return with its count. We expect the next call to return
- * an error code */
- if (ret > 0)
+ } else if (status < 0 && count > 0) {
+ /*
+ * An error occurred and we already transferred
+ * something on one of the previous pages.
+ * Just return what we already copied and log this
+ * err.
+ *
+ * Note: This seems like an incorrect approach but
+ * cannot change it until we check if any user space
+ * ABI relies on this behavior.
+ */
+ if (status != PIPE_ERROR_AGAIN)
+ pr_info_ratelimited("goldfish_pipe: backend returned error %d on %s\n",
+ status, is_write ? "write" : "read");
+ ret = 0;
break;
+ }
- /* If the error is not PIPE_ERROR_AGAIN, or if we are not in
- * non-blocking mode, just return the error code.
- */
+ /*
+ * If the error is not PIPE_ERROR_AGAIN, or if we are not in
+ * non-blocking mode, just return the error code.
+ */
if (status != PIPE_ERROR_AGAIN ||
(filp->f_flags & O_NONBLOCK) != 0) {
ret = goldfish_pipe_error_convert(status);
break;
}
- /* We will have to wait until more data/space is available.
- * First, mark the pipe as waiting for a specific wake signal.
- */
+ /*
+ * The backend blocked the read/write, wait until the backend
+ * tells us it's ready to process more data.
+ */
wakeBit = is_write ? BIT_WAKE_ON_WRITE : BIT_WAKE_ON_READ;
set_bit(wakeBit, &pipe->flags);
/* Tell the emulator we're going to wait for a wake event */
- goldfish_cmd(pipe, CMD_WAKE_ON_WRITE + cmd_offset);
+ goldfish_cmd(pipe,
+ is_write ? CMD_WAKE_ON_WRITE : CMD_WAKE_ON_READ);
/* Unlock the pipe, then wait for the wake signal */
mutex_unlock(&pipe->lock);
@@ -388,12 +409,13 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
/* Try to re-acquire the lock */
if (mutex_lock_interruptible(&pipe->lock))
return -ERESTARTSYS;
-
- /* Try the transfer again */
- continue;
}
mutex_unlock(&pipe->lock);
- return ret;
+
+ if (ret < 0)
+ return ret;
+ else
+ return count;
}
static ssize_t goldfish_pipe_read(struct file *filp, char __user *buffer,
@@ -446,10 +468,11 @@ static irqreturn_t goldfish_pipe_interrupt(int irq, void *dev_id)
unsigned long irq_flags;
int count = 0;
- /* We're going to read from the emulator a list of (channel,flags)
- * pairs corresponding to the wake events that occured on each
- * blocked pipe (i.e. channel).
- */
+ /*
+ * We're going to read from the emulator a list of (channel,flags)
+ * pairs corresponding to the wake events that occurred on each
+ * blocked pipe (i.e. channel).
+ */
spin_lock_irqsave(&dev->lock, irq_flags);
for (;;) {
/* First read the channel, 0 means the end of the list */
@@ -600,6 +623,12 @@ static int goldfish_pipe_probe(struct platform_device *pdev)
goto error;
}
setup_access_params_addr(pdev, dev);
+
+ /* Although the pipe device in the classic Android emulator does not
+ * recognize the 'version' register, it won't treat this as an error
+ * either and will simply return 0, which is fine.
+ */
+ dev->version = readl(dev->base + PIPE_REG_VERSION);
return 0;
error:
@@ -615,11 +644,26 @@ static int goldfish_pipe_remove(struct platform_device *pdev)
return 0;
}
+static const struct acpi_device_id goldfish_pipe_acpi_match[] = {
+ { "GFSH0003", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, goldfish_pipe_acpi_match);
+
+static const struct of_device_id goldfish_pipe_of_match[] = {
+ { .compatible = "google,android-pipe", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, goldfish_pipe_of_match);
+
static struct platform_driver goldfish_pipe = {
.probe = goldfish_pipe_probe,
.remove = goldfish_pipe_remove,
.driver = {
- .name = "goldfish_pipe"
+ .name = "goldfish_pipe",
+ .owner = THIS_MODULE,
+ .of_match_table = goldfish_pipe_of_match,
+ .acpi_match_table = ACPI_PTR(goldfish_pipe_acpi_match),
}
};