Initial import

1 files changed, 675 insertions, 0 deletions

diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
new file mode 100644
index 000000000..001b199a8
--- /dev/null
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -0,0 +1,675 @@
+/*
+ * intel_scu_ipc.c: Driver for the Intel SCU IPC mechanism
+ *
+ * (C) Copyright 2008-2010,2015 Intel Corporation
+ * Author: Sreedhara DS (sreedhara.ds@intel.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * SCU running in ARC processor communicates with other entity running in IA
+ * core through IPC mechanism which in turn messaging between IA core ad SCU.
+ * SCU has two IPC mechanism IPC-1 and IPC-2. IPC-1 is used between IA32 and
+ * SCU where IPC-2 is used between P-Unit and SCU. This driver delas with
+ * IPC-1 Driver provides an API for power control unit registers (e.g. MSIC)
+ * along with other APIs.
+ */
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/pm.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/sfi.h>
+#include <linux/module.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_scu_ipc.h>
+
+/* IPC defines the following message types */
+#define IPCMSG_WATCHDOG_TIMER 0xF8 /* Set Kernel Watchdog Threshold */
+#define IPCMSG_BATTERY        0xEF /* Coulomb Counter Accumulator */
+#define IPCMSG_FW_UPDATE      0xFE /* Firmware update */
+#define IPCMSG_PCNTRL         0xFF /* Power controller unit read/write */
+#define IPCMSG_FW_REVISION    0xF4 /* Get firmware revision */
+
+/* Command id associated with message IPCMSG_PCNTRL */
+#define IPC_CMD_PCNTRL_W      0 /* Register write */
+#define IPC_CMD_PCNTRL_R      1 /* Register read */
+#define IPC_CMD_PCNTRL_M      2 /* Register read-modify-write */
+
+/*
+ * IPC register summary
+ *
+ * IPC register blocks are memory mapped at fixed address of PCI BAR 0.
+ * To read or write information to the SCU, driver writes to IPC-1 memory
+ * mapped registers. The following is the IPC mechanism
+ *
+ * 1. IA core cDMI interface claims this transaction and converts it to a
+ *    Transaction Layer Packet (TLP) message which is sent across the cDMI.
+ *
+ * 2. South Complex cDMI block receives this message and writes it to
+ *    the IPC-1 register block, causing an interrupt to the SCU
+ *
+ * 3. SCU firmware decodes this interrupt and IPC message and the appropriate
+ *    message handler is called within firmware.
+ */
+
+#define IPC_WWBUF_SIZE    20		/* IPC Write buffer Size */
+#define IPC_RWBUF_SIZE    20		/* IPC Read buffer Size */
+#define IPC_IOC	          0x100		/* IPC command register IOC bit */
+
+#define PCI_DEVICE_ID_LINCROFT		0x082a
+#define PCI_DEVICE_ID_PENWELL		0x080e
+#define PCI_DEVICE_ID_CLOVERVIEW	0x08ea
+#define PCI_DEVICE_ID_TANGIER		0x11a0
+
+/* intel scu ipc driver data */
+struct intel_scu_ipc_pdata_t {
+	u32 i2c_base;
+	u32 i2c_len;
+	u8 irq_mode;
+};
+
+static struct intel_scu_ipc_pdata_t intel_scu_ipc_lincroft_pdata = {
+	.i2c_base = 0xff12b000,
+	.i2c_len = 0x10,
+	.irq_mode = 0,
+};
+
+/* Penwell and Cloverview */
+static struct intel_scu_ipc_pdata_t intel_scu_ipc_penwell_pdata = {
+	.i2c_base = 0xff12b000,
+	.i2c_len = 0x10,
+	.irq_mode = 1,
+};
+
+static struct intel_scu_ipc_pdata_t intel_scu_ipc_tangier_pdata = {
+	.i2c_base  = 0xff00d000,
+	.i2c_len = 0x10,
+	.irq_mode = 0,
+};
+
+static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id);
+static void ipc_remove(struct pci_dev *pdev);
+
+struct intel_scu_ipc_dev {
+	struct pci_dev *pdev;
+	void __iomem *ipc_base;
+	void __iomem *i2c_base;
+	struct completion cmd_complete;
+	u8 irq_mode;
+};
+
+static struct intel_scu_ipc_dev  ipcdev; /* Only one for now */
+
+/*
+ * IPC Read Buffer (Read Only):
+ * 16 byte buffer for receiving data from SCU, if IPC command
+ * processing results in response data
+ */
+#define IPC_READ_BUFFER		0x90
+
+#define IPC_I2C_CNTRL_ADDR	0
+#define I2C_DATA_ADDR		0x04
+
+static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */
+
+/*
+ * Command Register (Write Only):
+ * A write to this register results in an interrupt to the SCU core processor
+ * Format:
+ * |rfu2(8) | size(8) | command id(4) | rfu1(3) | ioc(1) | command(8)|
+ */
+static inline void ipc_command(u32 cmd) /* Send ipc command */
+{
+	if (ipcdev.irq_mode) {
+		reinit_completion(&ipcdev.cmd_complete);
+		writel(cmd | IPC_IOC, ipcdev.ipc_base);
+	}
+	writel(cmd, ipcdev.ipc_base);
+}
+
+/*
+ * IPC Write Buffer (Write Only):
+ * 16-byte buffer for sending data associated with IPC command to
+ * SCU. Size of the data is specified in the IPC_COMMAND_REG register
+ */
+static inline void ipc_data_writel(u32 data, u32 offset) /* Write ipc data */
+{
+	writel(data, ipcdev.ipc_base + 0x80 + offset);
+}
+
+/*
+ * Status Register (Read Only):
+ * Driver will read this register to get the ready/busy status of the IPC
+ * block and error status of the IPC command that was just processed by SCU
+ * Format:
+ * |rfu3(8)|error code(8)|initiator id(8)|cmd id(4)|rfu1(2)|error(1)|busy(1)|
+ */
+static inline u8 ipc_read_status(void)
+{
+	return __raw_readl(ipcdev.ipc_base + 0x04);
+}
+
+static inline u8 ipc_data_readb(u32 offset) /* Read ipc byte data */
+{
+	return readb(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
+}
+
+static inline u32 ipc_data_readl(u32 offset) /* Read ipc u32 data */
+{
+	return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
+}
+
+/* Wait till scu status is busy */
+static inline int busy_loop(void)
+{
+	u32 status = ipc_read_status();
+	u32 loop_count = 100000;
+
+	/* break if scu doesn't reset busy bit after huge retry */
+	while ((status & BIT(0)) && --loop_count) {
+		udelay(1); /* scu processing time is in few u secods */
+		status = ipc_read_status();
+	}
+
+	if (status & BIT(0)) {
+		dev_err(&ipcdev.pdev->dev, "IPC timed out");
+		return -ETIMEDOUT;
+	}
+
+	if (status & BIT(1))
+		return -EIO;
+
+	return 0;
+}
+
+/* Wait till ipc ioc interrupt is received or timeout in 3 HZ */
+static inline int ipc_wait_for_interrupt(void)
+{
+	int status;
+
+	if (!wait_for_completion_timeout(&ipcdev.cmd_complete, 3 * HZ)) {
+		struct device *dev = &ipcdev.pdev->dev;
+		dev_err(dev, "IPC timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	status = ipc_read_status();
+	if (status & BIT(1))
+		return -EIO;
+
+	return 0;
+}
+
+static int intel_scu_ipc_check_status(void)
+{
+	return ipcdev.irq_mode ? ipc_wait_for_interrupt() : busy_loop();
+}
+
+/* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
+static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
+{
+	int nc;
+	u32 offset = 0;
+	int err;
+	u8 cbuf[IPC_WWBUF_SIZE] = { };
+	u32 *wbuf = (u32 *)&cbuf;
+
+	mutex_lock(&ipclock);
+
+	memset(cbuf, 0, sizeof(cbuf));
+
+	if (ipcdev.pdev == NULL) {
+		mutex_unlock(&ipclock);
+		return -ENODEV;
+	}
+
+	for (nc = 0; nc < count; nc++, offset += 2) {
+		cbuf[offset] = addr[nc];
+		cbuf[offset + 1] = addr[nc] >> 8;
+	}
+
+	if (id == IPC_CMD_PCNTRL_R) {
+		for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
+			ipc_data_writel(wbuf[nc], offset);
+		ipc_command((count * 2) << 16 | id << 12 | 0 << 8 | op);
+	} else if (id == IPC_CMD_PCNTRL_W) {
+		for (nc = 0; nc < count; nc++, offset += 1)
+			cbuf[offset] = data[nc];
+		for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
+			ipc_data_writel(wbuf[nc], offset);
+		ipc_command((count * 3) << 16 | id << 12 | 0 << 8 | op);
+	} else if (id == IPC_CMD_PCNTRL_M) {
+		cbuf[offset] = data[0];
+		cbuf[offset + 1] = data[1];
+		ipc_data_writel(wbuf[0], 0); /* Write wbuff */
+		ipc_command(4 << 16 | id << 12 | 0 << 8 | op);
+	}
+
+	err = intel_scu_ipc_check_status();
+	if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
+		/* Workaround: values are read as 0 without memcpy_fromio */
+		memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16);
+		for (nc = 0; nc < count; nc++)
+			data[nc] = ipc_data_readb(nc);
+	}
+	mutex_unlock(&ipclock);
+	return err;
+}
+
+/**
+ *	intel_scu_ipc_ioread8		-	read a word via the SCU
+ *	@addr: register on SCU
+ *	@data: return pointer for read byte
+ *
+ *	Read a single register. Returns 0 on success or an error code. All
+ *	locking between SCU accesses is handled for the caller.
+ *
+ *	This function may sleep.
+ */
+int intel_scu_ipc_ioread8(u16 addr, u8 *data)
+{
+	return pwr_reg_rdwr(&addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
+}
+EXPORT_SYMBOL(intel_scu_ipc_ioread8);
+
+/**
+ *	intel_scu_ipc_ioread16		-	read a word via the SCU
+ *	@addr: register on SCU
+ *	@data: return pointer for read word
+ *
+ *	Read a register pair. Returns 0 on success or an error code. All
+ *	locking between SCU accesses is handled for the caller.
+ *
+ *	This function may sleep.
+ */
+int intel_scu_ipc_ioread16(u16 addr, u16 *data)
+{
+	u16 x[2] = {addr, addr + 1};
+	return pwr_reg_rdwr(x, (u8 *)data, 2, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
+}
+EXPORT_SYMBOL(intel_scu_ipc_ioread16);
+
+/**
+ *	intel_scu_ipc_ioread32		-	read a dword via the SCU
+ *	@addr: register on SCU
+ *	@data: return pointer for read dword
+ *
+ *	Read four registers. Returns 0 on success or an error code. All
+ *	locking between SCU accesses is handled for the caller.
+ *
+ *	This function may sleep.
+ */
+int intel_scu_ipc_ioread32(u16 addr, u32 *data)
+{
+	u16 x[4] = {addr, addr + 1, addr + 2, addr + 3};
+	return pwr_reg_rdwr(x, (u8 *)data, 4, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
+}
+EXPORT_SYMBOL(intel_scu_ipc_ioread32);
+
+/**
+ *	intel_scu_ipc_iowrite8		-	write a byte via the SCU
+ *	@addr: register on SCU
+ *	@data: byte to write
+ *
+ *	Write a single register. Returns 0 on success or an error code. All
+ *	locking between SCU accesses is handled for the caller.
+ *
+ *	This function may sleep.
+ */
+int intel_scu_ipc_iowrite8(u16 addr, u8 data)
+{
+	return pwr_reg_rdwr(&addr, &data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
+}
+EXPORT_SYMBOL(intel_scu_ipc_iowrite8);
+
+/**
+ *	intel_scu_ipc_iowrite16		-	write a word via the SCU
+ *	@addr: register on SCU
+ *	@data: word to write
+ *
+ *	Write two registers. Returns 0 on success or an error code. All
+ *	locking between SCU accesses is handled for the caller.
+ *
+ *	This function may sleep.
+ */
+int intel_scu_ipc_iowrite16(u16 addr, u16 data)
+{
+	u16 x[2] = {addr, addr + 1};
+	return pwr_reg_rdwr(x, (u8 *)&data, 2, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
+}
+EXPORT_SYMBOL(intel_scu_ipc_iowrite16);
+
+/**
+ *	intel_scu_ipc_iowrite32		-	write a dword via the SCU
+ *	@addr: register on SCU
+ *	@data: dword to write
+ *
+ *	Write four registers. Returns 0 on success or an error code. All
+ *	locking between SCU accesses is handled for the caller.
+ *
+ *	This function may sleep.
+ */
+int intel_scu_ipc_iowrite32(u16 addr, u32 data)
+{
+	u16 x[4] = {addr, addr + 1, addr + 2, addr + 3};
+	return pwr_reg_rdwr(x, (u8 *)&data, 4, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
+}
+EXPORT_SYMBOL(intel_scu_ipc_iowrite32);
+
+/**
+ *	intel_scu_ipc_readvv		-	read a set of registers
+ *	@addr: register list
+ *	@data: bytes to return
+ *	@len: length of array
+ *
+ *	Read registers. Returns 0 on success or an error code. All
+ *	locking between SCU accesses is handled for the caller.
+ *
+ *	The largest array length permitted by the hardware is 5 items.
+ *
+ *	This function may sleep.
+ */
+int intel_scu_ipc_readv(u16 *addr, u8 *data, int len)
+{
+	return pwr_reg_rdwr(addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
+}
+EXPORT_SYMBOL(intel_scu_ipc_readv);
+
+/**
+ *	intel_scu_ipc_writev		-	write a set of registers
+ *	@addr: register list
+ *	@data: bytes to write
+ *	@len: length of array
+ *
+ *	Write registers. Returns 0 on success or an error code. All
+ *	locking between SCU accesses is handled for the caller.
+ *
+ *	The largest array length permitted by the hardware is 5 items.
+ *
+ *	This function may sleep.
+ *
+ */
+int intel_scu_ipc_writev(u16 *addr, u8 *data, int len)
+{
+	return pwr_reg_rdwr(addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
+}
+EXPORT_SYMBOL(intel_scu_ipc_writev);
+
+/**
+ *	intel_scu_ipc_update_register	-	r/m/w a register
+ *	@addr: register address
+ *	@bits: bits to update
+ *	@mask: mask of bits to update
+ *
+ *	Read-modify-write power control unit register. The first data argument
+ *	must be register value and second is mask value
+ *	mask is a bitmap that indicates which bits to update.
+ *	0 = masked. Don't modify this bit, 1 = modify this bit.
+ *	returns 0 on success or an error code.
+ *
+ *	This function may sleep. Locking between SCU accesses is handled
+ *	for the caller.
+ */
+int intel_scu_ipc_update_register(u16 addr, u8 bits, u8 mask)
+{
+	u8 data[2] = { bits, mask };
+	return pwr_reg_rdwr(&addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_M);
+}
+EXPORT_SYMBOL(intel_scu_ipc_update_register);
+
+/**
+ *	intel_scu_ipc_simple_command	-	send a simple command
+ *	@cmd: command
+ *	@sub: sub type
+ *
+ *	Issue a simple command to the SCU. Do not use this interface if
+ *	you must then access data as any data values may be overwritten
+ *	by another SCU access by the time this function returns.
+ *
+ *	This function may sleep. Locking for SCU accesses is handled for
+ *	the caller.
+ */
+int intel_scu_ipc_simple_command(int cmd, int sub)
+{
+	int err;
+
+	mutex_lock(&ipclock);
+	if (ipcdev.pdev == NULL) {
+		mutex_unlock(&ipclock);
+		return -ENODEV;
+	}
+	ipc_command(sub << 12 | cmd);
+	err = intel_scu_ipc_check_status();
+	mutex_unlock(&ipclock);
+	return err;
+}
+EXPORT_SYMBOL(intel_scu_ipc_simple_command);
+
+/**
+ *	intel_scu_ipc_command	-	command with data
+ *	@cmd: command
+ *	@sub: sub type
+ *	@in: input data
+ *	@inlen: input length in dwords
+ *	@out: output data
+ *	@outlein: output length in dwords
+ *
+ *	Issue a command to the SCU which involves data transfers. Do the
+ *	data copies under the lock but leave it for the caller to interpret
+ */
+int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
+			  u32 *out, int outlen)
+{
+	int i, err;
+
+	mutex_lock(&ipclock);
+	if (ipcdev.pdev == NULL) {
+		mutex_unlock(&ipclock);
+		return -ENODEV;
+	}
+
+	for (i = 0; i < inlen; i++)
+		ipc_data_writel(*in++, 4 * i);
+
+	ipc_command((inlen << 16) | (sub << 12) | cmd);
+	err = intel_scu_ipc_check_status();
+
+	if (!err) {
+		for (i = 0; i < outlen; i++)
+			*out++ = ipc_data_readl(4 * i);
+	}
+
+	mutex_unlock(&ipclock);
+	return err;
+}
+EXPORT_SYMBOL(intel_scu_ipc_command);
+
+/* I2C commands */
+#define IPC_I2C_WRITE 1 /* I2C Write command */
+#define IPC_I2C_READ  2 /* I2C Read command */
+
+/**
+ *	intel_scu_ipc_i2c_cntrl		-	I2C read/write operations
+ *	@addr: I2C address + command bits
+ *	@data: data to read/write
+ *
+ *	Perform an an I2C read/write operation via the SCU. All locking is
+ *	handled for the caller. This function may sleep.
+ *
+ *	Returns an error code or 0 on success.
+ *
+ *	This has to be in the IPC driver for the locking.
+ */
+int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data)
+{
+	u32 cmd = 0;
+
+	mutex_lock(&ipclock);
+	if (ipcdev.pdev == NULL) {
+		mutex_unlock(&ipclock);
+		return -ENODEV;
+	}
+	cmd = (addr >> 24) & 0xFF;
+	if (cmd == IPC_I2C_READ) {
+		writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
+		/* Write not getting updated without delay */
+		mdelay(1);
+		*data = readl(ipcdev.i2c_base + I2C_DATA_ADDR);
+	} else if (cmd == IPC_I2C_WRITE) {
+		writel(*data, ipcdev.i2c_base + I2C_DATA_ADDR);
+		mdelay(1);
+		writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
+	} else {
+		dev_err(&ipcdev.pdev->dev,
+			"intel_scu_ipc: I2C INVALID_CMD = 0x%x\n", cmd);
+
+		mutex_unlock(&ipclock);
+		return -EIO;
+	}
+	mutex_unlock(&ipclock);
+	return 0;
+}
+EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl);
+
+/*
+ * Interrupt handler gets called when ioc bit of IPC_COMMAND_REG set to 1
+ * When ioc bit is set to 1, caller api must wait for interrupt handler called
+ * which in turn unlocks the caller api. Currently this is not used
+ *
+ * This is edge triggered so we need take no action to clear anything
+ */
+static irqreturn_t ioc(int irq, void *dev_id)
+{
+	if (ipcdev.irq_mode)
+		complete(&ipcdev.cmd_complete);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ *	ipc_probe	-	probe an Intel SCU IPC
+ *	@dev: the PCI device matching
+ *	@id: entry in the match table
+ *
+ *	Enable and install an intel SCU IPC. This appears in the PCI space
+ *	but uses some hard coded addresses as well.
+ */
+static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int err;
+	struct intel_scu_ipc_pdata_t *pdata;
+	resource_size_t base;
+
+	if (ipcdev.pdev)		/* We support only one SCU */
+		return -EBUSY;
+
+	pdata = (struct intel_scu_ipc_pdata_t *)id->driver_data;
+
+	ipcdev.pdev = pci_dev_get(dev);
+	ipcdev.irq_mode = pdata->irq_mode;
+
+	err = pci_enable_device(dev);
+	if (err)
+		return err;
+
+	err = pci_request_regions(dev, "intel_scu_ipc");
+	if (err)
+		return err;
+
+	base = pci_resource_start(dev, 0);
+	if (!base)
+		return -ENOMEM;
+
+	init_completion(&ipcdev.cmd_complete);
+
+	if (request_irq(dev->irq, ioc, 0, "intel_scu_ipc", &ipcdev))
+		return -EBUSY;
+
+	ipcdev.ipc_base = ioremap_nocache(base, pci_resource_len(dev, 0));
+	if (!ipcdev.ipc_base)
+		return -ENOMEM;
+
+	ipcdev.i2c_base = ioremap_nocache(pdata->i2c_base, pdata->i2c_len);
+	if (!ipcdev.i2c_base) {
+		iounmap(ipcdev.ipc_base);
+		return -ENOMEM;
+	}
+
+	intel_scu_devices_create();
+
+	return 0;
+}
+
+/**
+ *	ipc_remove	-	remove a bound IPC device
+ *	@pdev: PCI device
+ *
+ *	In practice the SCU is not removable but this function is also
+ *	called for each device on a module unload or cleanup which is the
+ *	path that will get used.
+ *
+ *	Free up the mappings and release the PCI resources
+ */
+static void ipc_remove(struct pci_dev *pdev)
+{
+	free_irq(pdev->irq, &ipcdev);
+	pci_release_regions(pdev);
+	pci_dev_put(ipcdev.pdev);
+	iounmap(ipcdev.ipc_base);
+	iounmap(ipcdev.i2c_base);
+	ipcdev.pdev = NULL;
+	intel_scu_devices_destroy();
+}
+
+static const struct pci_device_id pci_ids[] = {
+	{
+		PCI_VDEVICE(INTEL, PCI_DEVICE_ID_LINCROFT),
+		(kernel_ulong_t)&intel_scu_ipc_lincroft_pdata,
+	}, {
+		PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL),
+		(kernel_ulong_t)&intel_scu_ipc_penwell_pdata,
+	}, {
+		PCI_VDEVICE(INTEL, PCI_DEVICE_ID_CLOVERVIEW),
+		(kernel_ulong_t)&intel_scu_ipc_penwell_pdata,
+	}, {
+		PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER),
+		(kernel_ulong_t)&intel_scu_ipc_tangier_pdata,
+	}, {
+		0,
+	}
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver ipc_driver = {
+	.name = "intel_scu_ipc",
+	.id_table = pci_ids,
+	.probe = ipc_probe,
+	.remove = ipc_remove,
+};
+
+static int __init intel_scu_ipc_init(void)
+{
+	int platform;		/* Platform type */
+
+	platform = intel_mid_identify_cpu();
+	if (platform == 0)
+		return -ENODEV;
+	return  pci_register_driver(&ipc_driver);
+}
+
+static void __exit intel_scu_ipc_exit(void)
+{
+	pci_unregister_driver(&ipc_driver);
+}
+
+MODULE_AUTHOR("Sreedhara DS <sreedhara.ds@intel.com>");
+MODULE_DESCRIPTION("Intel SCU IPC driver");
+MODULE_LICENSE("GPL");
+
+module_init(intel_scu_ipc_init);
+module_exit(intel_scu_ipc_exit);