Linux-libre 4.3.2-gnu

22 files changed, 868 insertions, 351 deletions

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 08beeed54..f8758d6fe 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -333,7 +333,7 @@ config CHARGER_LP8788
 
 config CHARGER_GPIO
 	tristate "GPIO charger"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y to include support for chargers which report their online status
 	  through a GPIO pin.
@@ -391,26 +391,30 @@ config CHARGER_BQ2415X
 
 config CHARGER_BQ24190
 	tristate "TI BQ24190 battery charger driver"
-	depends on I2C && GPIOLIB
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y to enable support for the TI BQ24190 battery charger.
 
 config CHARGER_BQ24257
 	tristate "TI BQ24257 battery charger driver"
-	depends on I2C && GPIOLIB
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
 	depends on REGMAP_I2C
 	help
 	  Say Y to enable support for the TI BQ24257 battery charger.
 
 config CHARGER_BQ24735
 	tristate "TI BQ24735 battery charger support"
-	depends on I2C && GPIOLIB
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y to enable support for the TI BQ24735 battery charger.
 
 config CHARGER_BQ25890
 	tristate "TI BQ25890 battery charger driver"
-	depends on I2C && GPIOLIB
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
 	select REGMAP_I2C
 	help
 	  Say Y to enable support for the TI BQ25890 battery charger.
@@ -462,7 +466,8 @@ config BATTERY_RT5033
 
 config CHARGER_RT9455
 	tristate "Richtek RT9455 battery charger driver"
-	depends on I2C && GPIOLIB
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
 	select REGMAP_I2C
 	help
 	  Say Y to enable support for Richtek RT9455 battery charger.
diff --git a/drivers/power/avs/rockchip-io-domain.c b/drivers/power/avs/rockchip-io-domain.c
index 3ae35d059..2e300028f 100644
--- a/drivers/power/avs/rockchip-io-domain.c
+++ b/drivers/power/avs/rockchip-io-domain.c
@@ -43,6 +43,10 @@
 #define RK3288_SOC_CON2_FLASH0		BIT(7)
 #define RK3288_SOC_FLASH_SUPPLY_NUM	2
 
+#define RK3368_SOC_CON15		0x43c
+#define RK3368_SOC_CON15_FLASH0		BIT(14)
+#define RK3368_SOC_FLASH_SUPPLY_NUM	2
+
 struct rockchip_iodomain;
 
 /**
@@ -158,6 +162,25 @@ static void rk3288_iodomain_init(struct rockchip_iodomain *iod)
 		dev_warn(iod->dev, "couldn't update flash0 ctrl\n");
 }
 
+static void rk3368_iodomain_init(struct rockchip_iodomain *iod)
+{
+	int ret;
+	u32 val;
+
+	/* if no flash supply we should leave things alone */
+	if (!iod->supplies[RK3368_SOC_FLASH_SUPPLY_NUM].reg)
+		return;
+
+	/*
+	 * set flash0 iodomain to also use this framework
+	 * instead of a special gpio.
+	 */
+	val = RK3368_SOC_CON15_FLASH0 | (RK3368_SOC_CON15_FLASH0 << 16);
+	ret = regmap_write(iod->grf, RK3368_SOC_CON15, val);
+	if (ret < 0)
+		dev_warn(iod->dev, "couldn't update flash0 ctrl\n");
+}
+
 /*
  * On the rk3188 the io-domains are handled by a shared register with the
  * lower 8 bits being still being continuing drive-strength settings.
@@ -201,6 +224,34 @@ static const struct rockchip_iodomain_soc_data soc_data_rk3288 = {
 	.init = rk3288_iodomain_init,
 };
 
+static const struct rockchip_iodomain_soc_data soc_data_rk3368 = {
+	.grf_offset = 0x900,
+	.supply_names = {
+		NULL,		/* reserved */
+		"dvp",		/* DVPIO_VDD */
+		"flash0",	/* FLASH0_VDD (emmc) */
+		"wifi",		/* APIO2_VDD (sdio0) */
+		NULL,
+		"audio",	/* APIO3_VDD */
+		"sdcard",	/* SDMMC0_VDD (sdmmc) */
+		"gpio30",	/* APIO1_VDD */
+		"gpio1830",	/* APIO4_VDD (gpujtag) */
+	},
+	.init = rk3368_iodomain_init,
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3368_pmu = {
+	.grf_offset = 0x100,
+	.supply_names = {
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		"pmu",	        /*PMU IO domain*/
+		"vop",	        /*LCDC IO domain*/
+	},
+};
+
 static const struct of_device_id rockchip_iodomain_match[] = {
 	{
 		.compatible = "rockchip,rk3188-io-voltage-domain",
@@ -210,6 +261,14 @@ static const struct of_device_id rockchip_iodomain_match[] = {
 		.compatible = "rockchip,rk3288-io-voltage-domain",
 		.data = (void *)&soc_data_rk3288
 	},
+	{
+		.compatible = "rockchip,rk3368-io-voltage-domain",
+		.data = (void *)&soc_data_rk3368
+	},
+	{
+		.compatible = "rockchip,rk3368-pmu-io-voltage-domain",
+		.data = (void *)&soc_data_rk3368_pmu
+	},
 	{ /* sentinel */ },
 };
 
diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/bq2415x_charger.c
index e98dcb661..ec212b5be 100644
--- a/drivers/power/bq2415x_charger.c
+++ b/drivers/power/bq2415x_charger.c
@@ -170,7 +170,7 @@ struct bq2415x_device {
 	struct power_supply *charger;
 	struct power_supply_desc charger_desc;
 	struct delayed_work work;
-	struct power_supply *notify_psy;
+	struct device_node *notify_node;
 	struct notifier_block nb;
 	enum bq2415x_mode reported_mode;/* mode reported by hook function */
 	enum bq2415x_mode mode;		/* currently configured mode */
@@ -792,22 +792,47 @@ static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode)
 
 }
 
+static bool bq2415x_update_reported_mode(struct bq2415x_device *bq, int mA)
+{
+	enum bq2415x_mode mode;
+
+	if (mA == 0)
+		mode = BQ2415X_MODE_OFF;
+	else if (mA < 500)
+		mode = BQ2415X_MODE_NONE;
+	else if (mA < 1800)
+		mode = BQ2415X_MODE_HOST_CHARGER;
+	else
+		mode = BQ2415X_MODE_DEDICATED_CHARGER;
+
+	if (bq->reported_mode == mode)
+		return false;
+
+	bq->reported_mode = mode;
+	return true;
+}
+
 static int bq2415x_notifier_call(struct notifier_block *nb,
 		unsigned long val, void *v)
 {
 	struct bq2415x_device *bq =
 		container_of(nb, struct bq2415x_device, nb);
 	struct power_supply *psy = v;
-	enum bq2415x_mode mode;
 	union power_supply_propval prop;
 	int ret;
-	int mA;
 
 	if (val != PSY_EVENT_PROP_CHANGED)
 		return NOTIFY_OK;
 
-	if (psy != bq->notify_psy)
-		return NOTIFY_OK;
+	/* Ignore event if it was not send by notify_node/notify_device */
+	if (bq->notify_node) {
+		if (!psy->dev.parent ||
+		    psy->dev.parent->of_node != bq->notify_node)
+			return NOTIFY_OK;
+	} else if (bq->init_data.notify_device) {
+		if (strcmp(psy->desc->name, bq->init_data.notify_device) != 0)
+			return NOTIFY_OK;
+	}
 
 	dev_dbg(bq->dev, "notifier call was called\n");
 
@@ -816,22 +841,9 @@ static int bq2415x_notifier_call(struct notifier_block *nb,
 	if (ret != 0)
 		return NOTIFY_OK;
 
-	mA = prop.intval;
-
-	if (mA == 0)
-		mode = BQ2415X_MODE_OFF;
-	else if (mA < 500)
-		mode = BQ2415X_MODE_NONE;
-	else if (mA < 1800)
-		mode = BQ2415X_MODE_HOST_CHARGER;
-	else
-		mode = BQ2415X_MODE_DEDICATED_CHARGER;
-
-	if (bq->reported_mode == mode)
+	if (!bq2415x_update_reported_mode(bq, prop.intval))
 		return NOTIFY_OK;
 
-	bq->reported_mode = mode;
-
 	/* if automode is not enabled do not tell about reported_mode */
 	if (bq->automode < 1)
 		return NOTIFY_OK;
@@ -1536,6 +1548,8 @@ static int bq2415x_probe(struct i2c_client *client,
 	struct device_node *np = client->dev.of_node;
 	struct bq2415x_platform_data *pdata = client->dev.platform_data;
 	const struct acpi_device_id *acpi_id = NULL;
+	struct power_supply *notify_psy = NULL;
+	union power_supply_propval prop;
 
 	if (!np && !pdata && !ACPI_HANDLE(&client->dev)) {
 		dev_err(&client->dev, "Neither devicetree, nor platform data, nor ACPI support\n");
@@ -1569,25 +1583,6 @@ static int bq2415x_probe(struct i2c_client *client,
 		goto error_2;
 	}
 
-	if (np) {
-		bq->notify_psy = power_supply_get_by_phandle(np,
-						"ti,usb-charger-detection");
-
-		if (IS_ERR(bq->notify_psy)) {
-			dev_info(&client->dev,
-				 "no 'ti,usb-charger-detection' property (err=%ld)\n",
-				PTR_ERR(bq->notify_psy));
-			bq->notify_psy = NULL;
-		} else if (!bq->notify_psy) {
-			ret = -EPROBE_DEFER;
-			goto error_2;
-		}
-	} else if (pdata && pdata->notify_device) {
-		bq->notify_psy = power_supply_get_by_name(pdata->notify_device);
-	} else {
-		bq->notify_psy = NULL;
-	}
-
 	i2c_set_clientdata(client, bq);
 
 	bq->id = num;
@@ -1607,32 +1602,35 @@ static int bq2415x_probe(struct i2c_client *client,
 					       "ti,current-limit",
 					       &bq->init_data.current_limit);
 		if (ret)
-			goto error_3;
+			goto error_2;
 		ret = device_property_read_u32(bq->dev,
 					"ti,weak-battery-voltage",
 					&bq->init_data.weak_battery_voltage);
 		if (ret)
-			goto error_3;
+			goto error_2;
 		ret = device_property_read_u32(bq->dev,
 				"ti,battery-regulation-voltage",
 				&bq->init_data.battery_regulation_voltage);
 		if (ret)
-			goto error_3;
+			goto error_2;
 		ret = device_property_read_u32(bq->dev,
 					       "ti,charge-current",
 					       &bq->init_data.charge_current);
 		if (ret)
-			goto error_3;
+			goto error_2;
 		ret = device_property_read_u32(bq->dev,
 				"ti,termination-current",
 				&bq->init_data.termination_current);
 		if (ret)
-			goto error_3;
+			goto error_2;
 		ret = device_property_read_u32(bq->dev,
 					       "ti,resistor-sense",
 					       &bq->init_data.resistor_sense);
 		if (ret)
-			goto error_3;
+			goto error_2;
+		if (np)
+			bq->notify_node = of_parse_phandle(np,
+						"ti,usb-charger-detection", 0);
 	} else {
 		memcpy(&bq->init_data, pdata, sizeof(bq->init_data));
 	}
@@ -1642,56 +1640,72 @@ static int bq2415x_probe(struct i2c_client *client,
 	ret = bq2415x_power_supply_init(bq);
 	if (ret) {
 		dev_err(bq->dev, "failed to register power supply: %d\n", ret);
-		goto error_3;
+		goto error_2;
 	}
 
 	ret = bq2415x_sysfs_init(bq);
 	if (ret) {
 		dev_err(bq->dev, "failed to create sysfs entries: %d\n", ret);
-		goto error_4;
+		goto error_3;
 	}
 
 	ret = bq2415x_set_defaults(bq);
 	if (ret) {
 		dev_err(bq->dev, "failed to set default values: %d\n", ret);
-		goto error_5;
+		goto error_4;
 	}
 
-	if (bq->notify_psy) {
+	if (bq->notify_node || bq->init_data.notify_device) {
 		bq->nb.notifier_call = bq2415x_notifier_call;
 		ret = power_supply_reg_notifier(&bq->nb);
 		if (ret) {
 			dev_err(bq->dev, "failed to reg notifier: %d\n", ret);
-			goto error_6;
+			goto error_4;
 		}
 
-		/* Query for initial reported_mode and set it */
-		bq2415x_notifier_call(&bq->nb, PSY_EVENT_PROP_CHANGED,
-				      bq->notify_psy);
-		bq2415x_set_mode(bq, bq->reported_mode);
-
 		bq->automode = 1;
-		dev_info(bq->dev, "automode enabled\n");
+		dev_info(bq->dev, "automode supported, waiting for events\n");
 	} else {
 		bq->automode = -1;
 		dev_info(bq->dev, "automode not supported\n");
 	}
 
+	/* Query for initial reported_mode and set it */
+	if (bq->nb.notifier_call) {
+		if (np) {
+			notify_psy = power_supply_get_by_phandle(np,
+						"ti,usb-charger-detection");
+			if (IS_ERR(notify_psy))
+				notify_psy = NULL;
+		} else if (bq->init_data.notify_device) {
+			notify_psy = power_supply_get_by_name(
+						bq->init_data.notify_device);
+		}
+	}
+	if (notify_psy) {
+		ret = power_supply_get_property(notify_psy,
+					POWER_SUPPLY_PROP_CURRENT_MAX, &prop);
+		power_supply_put(notify_psy);
+
+		if (ret == 0) {
+			bq2415x_update_reported_mode(bq, prop.intval);
+			bq2415x_set_mode(bq, bq->reported_mode);
+		}
+	}
+
 	INIT_DELAYED_WORK(&bq->work, bq2415x_timer_work);
 	bq2415x_set_autotimer(bq, 1);
 
 	dev_info(bq->dev, "driver registered\n");
 	return 0;
 
-error_6:
-error_5:
-	bq2415x_sysfs_exit(bq);
 error_4:
-	bq2415x_power_supply_exit(bq);
+	bq2415x_sysfs_exit(bq);
 error_3:
-	if (bq->notify_psy)
-		power_supply_put(bq->notify_psy);
+	bq2415x_power_supply_exit(bq);
 error_2:
+	if (bq->notify_node)
+		of_node_put(bq->notify_node);
 	kfree(name);
 error_1:
 	mutex_lock(&bq2415x_id_mutex);
@@ -1707,10 +1721,11 @@ static int bq2415x_remove(struct i2c_client *client)
 {
 	struct bq2415x_device *bq = i2c_get_clientdata(client);
 
-	if (bq->notify_psy) {
+	if (bq->nb.notifier_call)
 		power_supply_unreg_notifier(&bq->nb);
-		power_supply_put(bq->notify_psy);
-	}
+
+	if (bq->notify_node)
+		of_node_put(bq->notify_node);
 
 	bq2415x_sysfs_exit(bq);
 	bq2415x_power_supply_exit(bq);
diff --git a/drivers/power/bq24190_charger.c b/drivers/power/bq24190_charger.c
index 052db78c3..469a452cb 100644
--- a/drivers/power/bq24190_charger.c
+++ b/drivers/power/bq24190_charger.c
@@ -902,7 +902,7 @@ static int bq24190_charger_property_is_writeable(struct power_supply *psy,
 }
 
 static enum power_supply_property bq24190_charger_properties[] = {
-	POWER_SUPPLY_PROP_TYPE,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
@@ -1515,6 +1515,7 @@ static const struct i2c_device_id bq24190_i2c_ids[] = {
 	{ "bq24190", BQ24190_REG_VPRS_PN_24190 },
 	{ },
 };
+MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
 
 #ifdef CONFIG_OF
 static const struct of_device_id bq24190_of_match[] = {
@@ -1534,7 +1535,6 @@ static struct i2c_driver bq24190_driver = {
 	.id_table	= bq24190_i2c_ids,
 	.driver = {
 		.name		= "bq24190-charger",
-		.owner		= THIS_MODULE,
 		.pm		= &bq24190_pm_ops,
 		.of_match_table	= of_match_ptr(bq24190_of_match),
 	},
diff --git a/drivers/power/bq24735-charger.c b/drivers/power/bq24735-charger.c
index 961a18930..eb2b3689d 100644
--- a/drivers/power/bq24735-charger.c
+++ b/drivers/power/bq24735-charger.c
@@ -267,8 +267,9 @@ static int bq24735_charger_probe(struct i2c_client *client,
 
 	name = (char *)charger->pdata->name;
 	if (!name) {
-		name = kasprintf(GFP_KERNEL, "bq24735@%s",
-				 dev_name(&client->dev));
+		name = devm_kasprintf(&client->dev, GFP_KERNEL,
+				      "bq24735@%s",
+				      dev_name(&client->dev));
 		if (!name) {
 			dev_err(&client->dev, "Failed to alloc device name\n");
 			return -ENOMEM;
@@ -296,23 +297,21 @@ static int bq24735_charger_probe(struct i2c_client *client,
 	if (ret < 0) {
 		dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
 			ret);
-		goto err_free_name;
+		return ret;
 	} else if (ret != 0x0040) {
 		dev_err(&client->dev,
 			"manufacturer id mismatch. 0x0040 != 0x%04x\n", ret);
-		ret = -ENODEV;
-		goto err_free_name;
+		return -ENODEV;
 	}
 
 	ret = bq24735_read_word(client, BQ24735_DEVICE_ID);
 	if (ret < 0) {
 		dev_err(&client->dev, "Failed to read device id : %d\n", ret);
-		goto err_free_name;
+		return ret;
 	} else if (ret != 0x000B) {
 		dev_err(&client->dev,
 			"device id mismatch. 0x000b != 0x%04x\n", ret);
-		ret = -ENODEV;
-		goto err_free_name;
+		return -ENODEV;
 	}
 
 	if (gpio_is_valid(charger->pdata->status_gpio)) {
@@ -331,7 +330,7 @@ static int bq24735_charger_probe(struct i2c_client *client,
 	ret = bq24735_config_charger(charger);
 	if (ret < 0) {
 		dev_err(&client->dev, "failed in configuring charger");
-		goto err_free_name;
+		return ret;
 	}
 
 	/* check for AC adapter presence */
@@ -339,17 +338,17 @@ static int bq24735_charger_probe(struct i2c_client *client,
 		ret = bq24735_enable_charging(charger);
 		if (ret < 0) {
 			dev_err(&client->dev, "Failed to enable charging\n");
-			goto err_free_name;
+			return ret;
 		}
 	}
 
-	charger->charger = power_supply_register(&client->dev, supply_desc,
-						 &psy_cfg);
+	charger->charger = devm_power_supply_register(&client->dev, supply_desc,
+						      &psy_cfg);
 	if (IS_ERR(charger->charger)) {
 		ret = PTR_ERR(charger->charger);
 		dev_err(&client->dev, "Failed to register power supply: %d\n",
 			ret);
-		goto err_free_name;
+		return ret;
 	}
 
 	if (client->irq) {
@@ -364,34 +363,11 @@ static int bq24735_charger_probe(struct i2c_client *client,
 			dev_err(&client->dev,
 				"Unable to register IRQ %d err %d\n",
 				client->irq, ret);
-			goto err_unregister_supply;
+			return ret;
 		}
 	}
 
 	return 0;
-err_unregister_supply:
-	power_supply_unregister(charger->charger);
-err_free_name:
-	if (name != charger->pdata->name)
-		kfree(name);
-
-	return ret;
-}
-
-static int bq24735_charger_remove(struct i2c_client *client)
-{
-	struct bq24735 *charger = i2c_get_clientdata(client);
-
-	if (charger->client->irq)
-		devm_free_irq(&charger->client->dev, charger->client->irq,
-			      &charger->charger);
-
-	power_supply_unregister(charger->charger);
-
-	if (charger->charger_desc.name != charger->pdata->name)
-		kfree(charger->charger_desc.name);
-
-	return 0;
 }
 
 static const struct i2c_device_id bq24735_charger_id[] = {
@@ -409,11 +385,9 @@ MODULE_DEVICE_TABLE(of, bq24735_match_ids);
 static struct i2c_driver bq24735_charger_driver = {
 	.driver = {
 		.name = "bq24735-charger",
-		.owner = THIS_MODULE,
 		.of_match_table = bq24735_match_ids,
 	},
 	.probe = bq24735_charger_probe,
-	.remove = bq24735_charger_remove,
 	.id_table = bq24735_charger_id,
 };
 
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index b6b98378f..8287261fd 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -39,47 +39,49 @@
 
 #include <linux/power/bq27x00_battery.h>
 
-#define DRIVER_VERSION			"1.2.0"
-
-#define BQ27x00_REG_TEMP		0x06
-#define BQ27x00_REG_VOLT		0x08
-#define BQ27x00_REG_AI			0x14
-#define BQ27x00_REG_FLAGS		0x0A
-#define BQ27x00_REG_TTE			0x16
-#define BQ27x00_REG_TTF			0x18
-#define BQ27x00_REG_TTECP		0x26
-#define BQ27x00_REG_NAC			0x0C /* Nominal available capacity */
-#define BQ27x00_REG_LMD			0x12 /* Last measured discharge */
-#define BQ27x00_REG_CYCT		0x2A /* Cycle count total */
-#define BQ27x00_REG_AE			0x22 /* Available energy */
-#define BQ27x00_POWER_AVG		0x24
-
-#define BQ27000_REG_RSOC		0x0B /* Relative State-of-Charge */
-#define BQ27000_REG_ILMD		0x76 /* Initial last measured discharge */
-#define BQ27000_FLAG_EDVF		BIT(0) /* Final End-of-Discharge-Voltage flag */
-#define BQ27000_FLAG_EDV1		BIT(1) /* First End-of-Discharge-Voltage flag */
-#define BQ27000_FLAG_CI			BIT(4) /* Capacity Inaccurate flag */
-#define BQ27000_FLAG_FC			BIT(5)
-#define BQ27000_FLAG_CHGS		BIT(7) /* Charge state flag */
-
-#define BQ27500_REG_SOC			0x2C
-#define BQ27500_REG_DCAP		0x3C /* Design capacity */
-#define BQ27500_FLAG_DSC		BIT(0)
-#define BQ27500_FLAG_SOCF		BIT(1) /* State-of-Charge threshold final */
-#define BQ27500_FLAG_SOC1		BIT(2) /* State-of-Charge threshold 1 */
-#define BQ27500_FLAG_FC			BIT(9)
-#define BQ27500_FLAG_OTC		BIT(15)
-
-#define BQ27742_POWER_AVG		0x76
-
-#define BQ27510_REG_SOC			0x20
-#define BQ27510_REG_DCAP		0x2E /* Design capacity */
-#define BQ27510_REG_CYCT		0x1E /* Cycle count total */
+#define DRIVER_VERSION		"1.2.0"
+
+#define BQ27XXX_MANUFACTURER	"Texas Instruments"
+
+#define BQ27x00_REG_TEMP	0x06
+#define BQ27x00_REG_VOLT	0x08
+#define BQ27x00_REG_AI		0x14
+#define BQ27x00_REG_FLAGS	0x0A
+#define BQ27x00_REG_TTE		0x16
+#define BQ27x00_REG_TTF		0x18
+#define BQ27x00_REG_TTECP	0x26
+#define BQ27x00_REG_NAC		0x0C /* Nominal available capacity */
+#define BQ27x00_REG_LMD		0x12 /* Last measured discharge */
+#define BQ27x00_REG_CYCT	0x2A /* Cycle count total */
+#define BQ27x00_REG_AE		0x22 /* Available energy */
+#define BQ27x00_POWER_AVG	0x24
+
+#define BQ27000_REG_RSOC	0x0B /* Relative State-of-Charge */
+#define BQ27000_REG_ILMD	0x76 /* Initial last measured discharge */
+#define BQ27000_FLAG_EDVF	BIT(0) /* Final End-of-Discharge-Voltage flag */
+#define BQ27000_FLAG_EDV1	BIT(1) /* First End-of-Discharge-Voltage flag */
+#define BQ27000_FLAG_CI		BIT(4) /* Capacity Inaccurate flag */
+#define BQ27000_FLAG_FC		BIT(5)
+#define BQ27000_FLAG_CHGS	BIT(7) /* Charge state flag */
+
+#define BQ27500_REG_SOC		0x2C
+#define BQ27500_REG_DCAP	0x3C /* Design capacity */
+#define BQ27500_FLAG_DSC	BIT(0)
+#define BQ27500_FLAG_SOCF	BIT(1) /* State-of-Charge threshold final */
+#define BQ27500_FLAG_SOC1	BIT(2) /* State-of-Charge threshold 1 */
+#define BQ27500_FLAG_FC		BIT(9)
+#define BQ27500_FLAG_OTC	BIT(15)
+
+#define BQ27742_POWER_AVG	0x76
+
+#define BQ27510_REG_SOC		0x20
+#define BQ27510_REG_DCAP	0x2E /* Design capacity */
+#define BQ27510_REG_CYCT	0x1E /* Cycle count total */
 
 /* bq27425 register addresses are same as bq27x00 addresses minus 4 */
-#define BQ27425_REG_OFFSET		0x04
+#define BQ27425_REG_OFFSET	0x04
 #define BQ27425_REG_SOC		(0x1C + BQ27425_REG_OFFSET)
-#define BQ27425_REG_DCAP		(0x3C + BQ27425_REG_OFFSET)
+#define BQ27425_REG_DCAP	(0x3C + BQ27425_REG_OFFSET)
 
 #define BQ27000_RS			20 /* Resistor sense */
 #define BQ27x00_POWER_CONSTANT		(256 * 29200 / 1000)
@@ -106,7 +108,7 @@ struct bq27x00_reg_cache {
 };
 
 struct bq27x00_device_info {
-	struct device 		*dev;
+	struct device		*dev;
 	int			id;
 	enum bq27x00_chip	chip;
 
@@ -142,6 +144,7 @@ static enum power_supply_property bq27x00_battery_props[] = {
 	POWER_SUPPLY_PROP_ENERGY_NOW,
 	POWER_SUPPLY_PROP_POWER_AVG,
 	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
 static enum power_supply_property bq27425_battery_props[] = {
@@ -156,6 +159,7 @@ static enum power_supply_property bq27425_battery_props[] = {
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
 static enum power_supply_property bq27742_battery_props[] = {
@@ -174,6 +178,7 @@ static enum power_supply_property bq27742_battery_props[] = {
 	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_POWER_AVG,
 	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
 static enum power_supply_property bq27510_battery_props[] = {
@@ -192,19 +197,20 @@ static enum power_supply_property bq27510_battery_props[] = {
 	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_POWER_AVG,
 	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
 static unsigned int poll_interval = 360;
 module_param(poll_interval, uint, 0644);
-MODULE_PARM_DESC(poll_interval, "battery poll interval in seconds - " \
-				"0 disables polling");
+MODULE_PARM_DESC(poll_interval,
+		 "battery poll interval in seconds - 0 disables polling");
 
 /*
  * Common code for BQ27x00 devices
  */
 
 static inline int bq27x00_read(struct bq27x00_device_info *di, u8 reg,
-		bool single)
+			       bool single)
 {
 	if (di->chip == BQ27425)
 		return di->bus.read(di, reg - BQ27425_REG_OFFSET, single);
@@ -313,8 +319,9 @@ static int bq27x00_battery_read_ilmd(struct bq27x00_device_info *di)
 			ilmd = bq27x00_read(di, BQ27510_REG_DCAP, false);
 		else
 			ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false);
-	} else
+	} else {
 		ilmd = bq27x00_read(di, BQ27000_REG_ILMD, true);
+	}
 
 	if (ilmd < 0) {
 		dev_dbg(di->dev, "error reading initial last measured discharge\n");
@@ -445,7 +452,7 @@ static int bq27x00_battery_read_health(struct bq27x00_device_info *di)
 		return tval;
 	}
 
-	if ((di->chip == BQ27500)) {
+	if (di->chip == BQ27500) {
 		if (tval & BQ27500_FLAG_SOCF)
 			tval = POWER_SUPPLY_HEALTH_DEAD;
 		else if (tval & BQ27500_FLAG_OTC)
@@ -559,7 +566,7 @@ static void bq27x00_battery_poll(struct work_struct *work)
  * Or 0 if something fails.
  */
 static int bq27x00_battery_current(struct bq27x00_device_info *di,
-	union power_supply_propval *val)
+				   union power_supply_propval *val)
 {
 	int curr;
 	int flags;
@@ -587,7 +594,7 @@ static int bq27x00_battery_current(struct bq27x00_device_info *di,
 }
 
 static int bq27x00_battery_status(struct bq27x00_device_info *di,
-	union power_supply_propval *val)
+				  union power_supply_propval *val)
 {
 	int status;
 
@@ -615,7 +622,7 @@ static int bq27x00_battery_status(struct bq27x00_device_info *di,
 }
 
 static int bq27x00_battery_capacity_level(struct bq27x00_device_info *di,
-	union power_supply_propval *val)
+					  union power_supply_propval *val)
 {
 	int level;
 
@@ -649,7 +656,7 @@ static int bq27x00_battery_capacity_level(struct bq27x00_device_info *di,
  * Or < 0 if something fails.
  */
 static int bq27x00_battery_voltage(struct bq27x00_device_info *di,
-	union power_supply_propval *val)
+				   union power_supply_propval *val)
 {
 	int volt;
 
@@ -665,7 +672,7 @@ static int bq27x00_battery_voltage(struct bq27x00_device_info *di,
 }
 
 static int bq27x00_simple_value(int value,
-	union power_supply_propval *val)
+				union power_supply_propval *val)
 {
 	if (value < 0)
 		return value;
@@ -749,6 +756,9 @@ static int bq27x00_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_HEALTH:
 		ret = bq27x00_simple_value(di->cache.health, val);
 		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BQ27XXX_MANUFACTURER;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -827,7 +837,6 @@ static void bq27x00_powersupply_unregister(struct bq27x00_device_info *di)
 	mutex_destroy(&di->lock);
 }
 
-
 /* i2c specific code */
 #ifdef CONFIG_BATTERY_BQ27X00_I2C
 
@@ -888,14 +897,12 @@ static int bq27x00_battery_probe(struct i2c_client *client,
 
 	name = devm_kasprintf(&client->dev, GFP_KERNEL, "%s-%d", id->name, num);
 	if (!name) {
-		dev_err(&client->dev, "failed to allocate device name\n");
 		retval = -ENOMEM;
 		goto batt_failed;
 	}
 
 	di = devm_kzalloc(&client->dev, sizeof(*di), GFP_KERNEL);
 	if (!di) {
-		dev_err(&client->dev, "failed to allocate device info data\n");
 		retval = -ENOMEM;
 		goto batt_failed;
 	}
@@ -956,8 +963,9 @@ static struct i2c_driver bq27x00_battery_driver = {
 static inline int bq27x00_battery_i2c_init(void)
 {
 	int ret = i2c_add_driver(&bq27x00_battery_driver);
+
 	if (ret)
-		printk(KERN_ERR "Unable to register BQ27x00 i2c driver\n");
+		pr_err("Unable to register BQ27x00 i2c driver\n");
 
 	return ret;
 }
@@ -978,7 +986,7 @@ static inline void bq27x00_battery_i2c_exit(void) {};
 #ifdef CONFIG_BATTERY_BQ27X00_PLATFORM
 
 static int bq27000_read_platform(struct bq27x00_device_info *di, u8 reg,
-			bool single)
+				 bool single)
 {
 	struct device *dev = di->dev;
 	struct bq27000_platform_data *pdata = dev->platform_data;
@@ -1028,10 +1036,8 @@ static int bq27000_battery_probe(struct platform_device *pdev)
 	}
 
 	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
-	if (!di) {
-		dev_err(&pdev->dev, "failed to allocate device info data\n");
+	if (!di)
 		return -ENOMEM;
-	}
 
 	platform_set_drvdata(pdev, di);
 
@@ -1064,8 +1070,9 @@ static struct platform_driver bq27000_battery_driver = {
 static inline int bq27x00_battery_platform_init(void)
 {
 	int ret = platform_driver_register(&bq27000_battery_driver);
+
 	if (ret)
-		printk(KERN_ERR "Unable to register BQ27000 platform driver\n");
+		pr_err("Unable to register BQ27000 platform driver\n");
 
 	return ret;
 }
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index 1c202ccbd..907293e6f 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -619,7 +619,7 @@ static int cm_get_battery_temperature(struct charger_manager *cm,
 
 #ifdef CONFIG_THERMAL
 	if (cm->tzd_batt) {
-		ret = thermal_zone_get_temp(cm->tzd_batt, (unsigned long *)temp);
+		ret = thermal_zone_get_temp(cm->tzd_batt, temp);
 		if (!ret)
 			/* Calibrate temperature unit */
 			*temp /= 100;
diff --git a/drivers/power/ds2780_battery.c b/drivers/power/ds2780_battery.c
index a7a042734..d3743d0ad 100644
--- a/drivers/power/ds2780_battery.c
+++ b/drivers/power/ds2780_battery.c
@@ -637,10 +637,6 @@ static ssize_t ds2780_read_param_eeprom_bin(struct file *filp,
 	struct power_supply *psy = to_power_supply(dev);
 	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
 
-	count = min_t(loff_t, count,
-		DS2780_EEPROM_BLOCK1_END -
-		DS2780_EEPROM_BLOCK1_START + 1 - off);
-
 	return ds2780_read_block(dev_info, buf,
 				DS2780_EEPROM_BLOCK1_START + off, count);
 }
@@ -655,10 +651,6 @@ static ssize_t ds2780_write_param_eeprom_bin(struct file *filp,
 	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
 	int ret;
 
-	count = min_t(loff_t, count,
-		DS2780_EEPROM_BLOCK1_END -
-		DS2780_EEPROM_BLOCK1_START + 1 - off);
-
 	ret = ds2780_write(dev_info, buf,
 				DS2780_EEPROM_BLOCK1_START + off, count);
 	if (ret < 0)
@@ -676,7 +668,7 @@ static struct bin_attribute ds2780_param_eeprom_bin_attr = {
 		.name = "param_eeprom",
 		.mode = S_IRUGO | S_IWUSR,
 	},
-	.size = DS2780_EEPROM_BLOCK1_END - DS2780_EEPROM_BLOCK1_START + 1,
+	.size = DS2780_PARAM_EEPROM_SIZE,
 	.read = ds2780_read_param_eeprom_bin,
 	.write = ds2780_write_param_eeprom_bin,
 };
@@ -690,10 +682,6 @@ static ssize_t ds2780_read_user_eeprom_bin(struct file *filp,
 	struct power_supply *psy = to_power_supply(dev);
 	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
 
-	count = min_t(loff_t, count,
-		DS2780_EEPROM_BLOCK0_END -
-		DS2780_EEPROM_BLOCK0_START + 1 - off);
-
 	return ds2780_read_block(dev_info, buf,
 				DS2780_EEPROM_BLOCK0_START + off, count);
 }
@@ -708,10 +696,6 @@ static ssize_t ds2780_write_user_eeprom_bin(struct file *filp,
 	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
 	int ret;
 
-	count = min_t(loff_t, count,
-		DS2780_EEPROM_BLOCK0_END -
-		DS2780_EEPROM_BLOCK0_START + 1 - off);
-
 	ret = ds2780_write(dev_info, buf,
 				DS2780_EEPROM_BLOCK0_START + off, count);
 	if (ret < 0)
@@ -729,7 +713,7 @@ static struct bin_attribute ds2780_user_eeprom_bin_attr = {
 		.name = "user_eeprom",
 		.mode = S_IRUGO | S_IWUSR,
 	},
-	.size = DS2780_EEPROM_BLOCK0_END - DS2780_EEPROM_BLOCK0_START + 1,
+	.size = DS2780_USER_EEPROM_SIZE,
 	.read = ds2780_read_user_eeprom_bin,
 	.write = ds2780_write_user_eeprom_bin,
 };
diff --git a/drivers/power/ds2781_battery.c b/drivers/power/ds2781_battery.c
index 56d583dae..c3680024f 100644
--- a/drivers/power/ds2781_battery.c
+++ b/drivers/power/ds2781_battery.c
@@ -639,8 +639,6 @@ static ssize_t ds2781_read_param_eeprom_bin(struct file *filp,
 	struct power_supply *psy = to_power_supply(dev);
 	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
 
-	count = min_t(loff_t, count, DS2781_PARAM_EEPROM_SIZE - off);
-
 	return ds2781_read_block(dev_info, buf,
 				DS2781_EEPROM_BLOCK1_START + off, count);
 }
@@ -655,8 +653,6 @@ static ssize_t ds2781_write_param_eeprom_bin(struct file *filp,
 	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
 	int ret;
 
-	count = min_t(loff_t, count, DS2781_PARAM_EEPROM_SIZE - off);
-
 	ret = ds2781_write(dev_info, buf,
 				DS2781_EEPROM_BLOCK1_START + off, count);
 	if (ret < 0)
@@ -688,8 +684,6 @@ static ssize_t ds2781_read_user_eeprom_bin(struct file *filp,
 	struct power_supply *psy = to_power_supply(dev);
 	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
 
-	count = min_t(loff_t, count, DS2781_USER_EEPROM_SIZE - off);
-
 	return ds2781_read_block(dev_info, buf,
 				DS2781_EEPROM_BLOCK0_START + off, count);
 
@@ -705,8 +699,6 @@ static ssize_t ds2781_write_user_eeprom_bin(struct file *filp,
 	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
 	int ret;
 
-	count = min_t(loff_t, count, DS2781_USER_EEPROM_SIZE - off);
-
 	ret = ds2781_write(dev_info, buf,
 				DS2781_EEPROM_BLOCK0_START + off, count);
 	if (ret < 0)
diff --git a/drivers/power/ltc2941-battery-gauge.c b/drivers/power/ltc2941-battery-gauge.c
index daeb08607..4adf2ba02 100644
--- a/drivers/power/ltc2941-battery-gauge.c
+++ b/drivers/power/ltc2941-battery-gauge.c
@@ -14,7 +14,6 @@
 #include <linux/swab.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
-#include <linux/idr.h>
 #include <linux/power_supply.h>
 #include <linux/slab.h>
 
@@ -63,15 +62,11 @@ struct ltc294x_info {
 	struct power_supply_desc supply_desc;	/* Supply description */
 	struct delayed_work work;	/* Work scheduler */
 	int num_regs;	/* Number of registers (chip type) */
-	int id;		/* Identifier of ltc294x chip */
 	int charge;	/* Last charge register content */
 	int r_sense;	/* mOhm */
 	int Qlsb;	/* nAh */
 };
 
-static DEFINE_IDR(ltc294x_id);
-static DEFINE_MUTEX(ltc294x_lock);
-
 static inline int convert_bin_to_uAh(
 	const struct ltc294x_info *info, int Q)
 {
@@ -371,10 +366,6 @@ static int ltc294x_i2c_remove(struct i2c_client *client)
 
 	cancel_delayed_work(&info->work);
 	power_supply_unregister(info->supply);
-	kfree(info->supply_desc.name);
-	mutex_lock(&ltc294x_lock);
-	idr_remove(&ltc294x_id, info->id);
-	mutex_unlock(&ltc294x_lock);
 	return 0;
 }
 
@@ -384,44 +375,28 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 	struct power_supply_config psy_cfg = {};
 	struct ltc294x_info *info;
 	int ret;
-	int num;
 	u32 prescaler_exp;
 	s32 r_sense;
 	struct device_node *np;
 
-	mutex_lock(&ltc294x_lock);
-	ret = idr_alloc(&ltc294x_id, client, 0, 0, GFP_KERNEL);
-	mutex_unlock(&ltc294x_lock);
-	if (ret < 0)
-		goto fail_id;
-
-	num = ret;
-
 	info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
-	if (info == NULL) {
-		ret = -ENOMEM;
-		goto fail_info;
-	}
+	if (info == NULL)
+		return -ENOMEM;
 
 	i2c_set_clientdata(client, info);
 
-	info->num_regs = id->driver_data;
-	info->supply_desc.name = kasprintf(GFP_KERNEL, "%s-%d", client->name,
-					   num);
-	if (!info->supply_desc.name) {
-		ret = -ENOMEM;
-		goto fail_name;
-	}
-
 	np = of_node_get(client->dev.of_node);
 
+	info->num_regs = id->driver_data;
+	info->supply_desc.name = np->name;
+
 	/* r_sense can be negative, when sense+ is connected to the battery
 	 * instead of the sense-. This results in reversed measurements. */
 	ret = of_property_read_u32(np, "lltc,resistor-sense", &r_sense);
 	if (ret < 0) {
 		dev_err(&client->dev,
 			"Could not find lltc,resistor-sense in devicetree\n");
-		goto fail_name;
+		return ret;
 	}
 	info->r_sense = r_sense;
 
@@ -446,7 +421,6 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 	}
 
 	info->client = client;
-	info->id = num;
 	info->supply_desc.type = POWER_SUPPLY_TYPE_BATTERY;
 	info->supply_desc.properties = ltc294x_properties;
 	if (info->num_regs >= LTC294X_REG_TEMPERATURE_LSB)
@@ -473,31 +447,19 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 	ret = ltc294x_reset(info, prescaler_exp);
 	if (ret < 0) {
 		dev_err(&client->dev, "Communication with chip failed\n");
-		goto fail_comm;
+		return ret;
 	}
 
 	info->supply = power_supply_register(&client->dev, &info->supply_desc,
 					     &psy_cfg);
 	if (IS_ERR(info->supply)) {
 		dev_err(&client->dev, "failed to register ltc2941\n");
-		ret = PTR_ERR(info->supply);
-		goto fail_register;
+		return PTR_ERR(info->supply);
 	} else {
 		schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
 	}
 
 	return 0;
-
-fail_register:
-	kfree(info->supply_desc.name);
-fail_comm:
-fail_name:
-fail_info:
-	mutex_lock(&ltc294x_lock);
-	idr_remove(&ltc294x_id, num);
-	mutex_unlock(&ltc294x_lock);
-fail_id:
-	return ret;
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/power/max77693_charger.c b/drivers/power/max77693_charger.c
index 754879eb5..060cab5ae 100644
--- a/drivers/power/max77693_charger.c
+++ b/drivers/power/max77693_charger.c
@@ -20,6 +20,7 @@
 #include <linux/power_supply.h>
 #include <linux/regmap.h>
 #include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-common.h>
 #include <linux/mfd/max77693-private.h>
 
 #define MAX77693_CHARGER_NAME				"max77693-charger"
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index a944338a3..9e29b1321 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -521,11 +521,6 @@ static ssize_t olpc_bat_eeprom_read(struct file *filp, struct kobject *kobj,
 	int ret;
 	int i;
 
-	if (off >= EEPROM_SIZE)
-		return 0;
-	if (off + count > EEPROM_SIZE)
-		count = EEPROM_SIZE - off;
-
 	for (i = 0; i < count; i++) {
 		ec_byte = EEPROM_START + off + i;
 		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1);
@@ -545,7 +540,7 @@ static struct bin_attribute olpc_bat_eeprom = {
 		.name = "eeprom",
 		.mode = S_IRUGO,
 	},
-	.size = 0,
+	.size = EEPROM_SIZE,
 	.read = olpc_bat_eeprom_read,
 };
 
diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
index cc0893ffb..3a45cc0c4 100644
--- a/drivers/power/pm2301_charger.c
+++ b/drivers/power/pm2301_charger.c
@@ -1244,7 +1244,6 @@ static struct i2c_driver pm2xxx_charger_driver = {
 	.remove = pm2xxx_wall_charger_remove,
 	.driver = {
 		.name = "pm2xxx-wall_charger",
-		.owner = THIS_MODULE,
 		.pm = PM2XXX_PM_OPS,
 	},
 	.id_table = pm2xxx_id,
diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
index 869284c2e..456987c88 100644
--- a/drivers/power/power_supply_core.c
+++ b/drivers/power/power_supply_core.c
@@ -557,7 +557,7 @@ EXPORT_SYMBOL_GPL(power_supply_unreg_notifier);
 
 #ifdef CONFIG_THERMAL
 static int power_supply_read_temp(struct thermal_zone_device *tzd,
-		unsigned long *temp)
+		int *temp)
 {
 	struct power_supply *psy;
 	union power_supply_propval val;
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 17d93a73c..5a0189bf1 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -166,5 +166,12 @@ config POWER_RESET_RMOBILE
 	help
 	  Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
 
+config POWER_RESET_ZX
+	tristate "ZTE SoCs reset driver"
+	depends on ARCH_ZX || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Reboot support for ZTE SoCs.
+
 endif
 
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index dbe06c368..096fa6704 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o
 obj-$(CONFIG_POWER_RESET_SYSCON) += syscon-reboot.o
 obj-$(CONFIG_POWER_RESET_SYSCON_POWEROFF) += syscon-poweroff.o
 obj-$(CONFIG_POWER_RESET_RMOBILE) += rmobile-reset.o
+obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
index 36dc52fb2..c378d4ec8 100644
--- a/drivers/power/reset/at91-reset.c
+++ b/drivers/power/reset/at91-reset.c
@@ -123,6 +123,15 @@ static int at91sam9g45_restart(struct notifier_block *this, unsigned long mode,
 	return NOTIFY_DONE;
 }
 
+static int sama5d3_restart(struct notifier_block *this, unsigned long mode,
+			   void *cmd)
+{
+	writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST),
+	       at91_rstc_base);
+
+	return NOTIFY_DONE;
+}
+
 static void __init at91_reset_status(struct platform_device *pdev)
 {
 	u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
@@ -155,13 +164,13 @@ static void __init at91_reset_status(struct platform_device *pdev)
 static const struct of_device_id at91_ramc_of_match[] = {
 	{ .compatible = "atmel,at91sam9260-sdramc", },
 	{ .compatible = "atmel,at91sam9g45-ddramc", },
-	{ .compatible = "atmel,sama5d3-ddramc", },
 	{ /* sentinel */ }
 };
 
 static const struct of_device_id at91_reset_of_match[] = {
 	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart },
 	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
+	{ .compatible = "atmel,sama5d3-rstc", .data = sama5d3_restart },
 	{ /* sentinel */ }
 };
 
@@ -181,13 +190,16 @@ static int at91_reset_of_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	for_each_matching_node(np, at91_ramc_of_match) {
-		at91_ramc_base[idx] = of_iomap(np, 0);
-		if (!at91_ramc_base[idx]) {
-			dev_err(&pdev->dev, "Could not map ram controller address\n");
-			return -ENODEV;
+	if (!of_device_is_compatible(pdev->dev.of_node, "atmel,sama5d3-rstc")) {
+		/* we need to shutdown the ddr controller, so get ramc base */
+		for_each_matching_node(np, at91_ramc_of_match) {
+			at91_ramc_base[idx] = of_iomap(np, 0);
+			if (!at91_ramc_base[idx]) {
+				dev_err(&pdev->dev, "Could not map ram controller address\n");
+				return -ENODEV;
+			}
+			idx++;
 		}
-		idx++;
 	}
 
 	match = of_match_node(at91_reset_of_match, pdev->dev.of_node);
diff --git a/drivers/power/reset/zx-reboot.c b/drivers/power/reset/zx-reboot.c
new file mode 100644
index 000000000..a5b009673
--- /dev/null
+++ b/drivers/power/reset/zx-reboot.c
@@ -0,0 +1,80 @@
+/*
+ * ZTE zx296702 SoC reset code
+ *
+ * Copyright (c) 2015 Linaro Ltd.
+ *
+ * Author: Jun Nie <jun.nie@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+static void __iomem *base;
+static void __iomem *pcu_base;
+
+static int zx_restart_handler(struct notifier_block *this,
+			      unsigned long mode, void *cmd)
+{
+	writel_relaxed(1, base + 0xb0);
+	writel_relaxed(1, pcu_base + 0x34);
+
+	mdelay(50);
+	pr_emerg("Unable to restart system\n");
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block zx_restart_nb = {
+	.notifier_call = zx_restart_handler,
+	.priority = 128,
+};
+
+static int zx_reboot_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int err;
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		WARN(1, "failed to map base address");
+		return -ENODEV;
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
+	pcu_base = of_iomap(np, 0);
+	if (!pcu_base) {
+		iounmap(base);
+		WARN(1, "failed to map pcu_base address");
+		return -ENODEV;
+	}
+
+	err = register_restart_handler(&zx_restart_nb);
+	if (err)
+		dev_err(&pdev->dev, "Register restart handler failed(err=%d)\n",
+			err);
+
+	return err;
+}
+
+static const struct of_device_id zx_reboot_of_match[] = {
+	{ .compatible = "zte,sysctrl" },
+	{}
+};
+
+static struct platform_driver zx_reboot_driver = {
+	.probe = zx_reboot_probe,
+	.driver = {
+		.name = "zx-reboot",
+		.of_match_table = zx_reboot_of_match,
+	},
+};
+module_platform_driver(zx_reboot_driver);
diff --git a/drivers/power/rt5033_battery.c b/drivers/power/rt5033_battery.c
index a7a6877b4..bcdd83048 100644
--- a/drivers/power/rt5033_battery.c
+++ b/drivers/power/rt5033_battery.c
@@ -165,7 +165,7 @@ static const struct i2c_device_id rt5033_battery_id[] = {
 	{ "rt5033-battery", },
 	{ }
 };
-MODULE_DEVICE_TABLE(platform, rt5033_battery_id);
+MODULE_DEVICE_TABLE(i2c, rt5033_battery_id);
 
 static struct i2c_driver rt5033_battery_driver = {
 	.driver = {
diff --git a/drivers/power/rt9455_charger.c b/drivers/power/rt9455_charger.c
index 08baac6e3..a49a9d44b 100644
--- a/drivers/power/rt9455_charger.c
+++ b/drivers/power/rt9455_charger.c
@@ -973,7 +973,6 @@ static int rt9455_irq_handler_check_irq2_register(struct rt9455_info *info,
 
 	if (irq2 & GET_MASK(F_CHRVPI)) {
 		dev_dbg(dev, "Charger fault occurred\n");
-		alert_userspace = true;
 		/*
 		 * CHRVPI bit is set in 2 cases:
 		 * 1. when the power source is connected to the charger.
@@ -981,6 +980,9 @@ static int rt9455_irq_handler_check_irq2_register(struct rt9455_info *info,
 		 * To identify the case, PWR_RDY bit is checked. Because
 		 * PWR_RDY bit is set / cleared after CHRVPI interrupt is
 		 * triggered, it is used delayed_work to later read PWR_RDY bit.
+		 * Also, do not set to true alert_userspace, because there is no
+		 * need to notify userspace when CHRVPI interrupt has occurred.
+		 * Userspace will be notified after PWR_RDY bit is read.
 		 */
 		queue_delayed_work(system_power_efficient_wq,
 				   &info->pwr_rdy_work,
@@ -1178,7 +1180,7 @@ static irqreturn_t rt9455_irq_handler_thread(int irq, void *data)
 		/*
 		 * Sometimes, an interrupt occurs while rt9455_probe() function
 		 * is executing and power_supply_register() is not yet called.
-		 * Do not call power_supply_charged() in this case.
+		 * Do not call power_supply_changed() in this case.
 		 */
 		if (info->charger)
 			power_supply_changed(info->charger);
@@ -1478,6 +1480,11 @@ static void rt9455_pwr_rdy_work_callback(struct work_struct *work)
 				   RT9455_MAX_CHARGING_TIME * HZ);
 		break;
 	}
+	/*
+	 * Notify userspace that the charger has been either connected to or
+	 * disconnected from the power source.
+	 */
+	power_supply_changed(info->charger);
 }
 
 static void rt9455_max_charging_time_work_callback(struct work_struct *work)
@@ -1533,6 +1540,11 @@ static void rt9455_batt_presence_work_callback(struct work_struct *work)
 			if (ret)
 				dev_err(dev, "Failed to unmask BATAB interrupt\n");
 		}
+		/*
+		 * Notify userspace that the battery is now connected to the
+		 * charger.
+		 */
+		power_supply_changed(info->charger);
 	}
 }
 
diff --git a/drivers/power/rx51_battery.c b/drivers/power/rx51_battery.c
index ac6206951..af9383d23 100644
--- a/drivers/power/rx51_battery.c
+++ b/drivers/power/rx51_battery.c
@@ -215,7 +215,7 @@ static int rx51_battery_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, di);
 
 	di->dev = &pdev->dev;
-	di->bat_desc.name = dev_name(&pdev->dev);
+	di->bat_desc.name = "rx51-battery";
 	di->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
 	di->bat_desc.properties = rx51_battery_props;
 	di->bat_desc.num_properties = ARRAY_SIZE(rx51_battery_props);
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index 022b8910e..74f2d3ff1 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -22,8 +22,10 @@
 #include <linux/power_supply.h>
 #include <linux/notifier.h>
 #include <linux/usb/otg.h>
-#include <linux/regulator/machine.h>
+#include <linux/i2c/twl4030-madc.h>
 
+#define TWL4030_BCIMDEN		0x00
+#define TWL4030_BCIMDKEY	0x01
 #define TWL4030_BCIMSTATEC	0x02
 #define TWL4030_BCIICHG		0x08
 #define TWL4030_BCIVAC		0x0a
@@ -32,11 +34,19 @@
 #define TWL4030_BCIMFSTS4	0x10
 #define TWL4030_BCICTL1		0x23
 #define TWL4030_BB_CFG		0x12
+#define TWL4030_BCIIREF1	0x27
+#define TWL4030_BCIIREF2	0x28
+#define TWL4030_BCIMFKEY	0x11
+#define TWL4030_BCIMFEN3	0x14
+#define TWL4030_BCIMFTH8	0x1d
+#define TWL4030_BCIMFTH9	0x1e
+#define TWL4030_BCIWDKEY	0x21
 
 #define TWL4030_BCIMFSTS1	0x01
 
 #define TWL4030_BCIAUTOWEN	BIT(5)
 #define TWL4030_CONFIG_DONE	BIT(4)
+#define TWL4030_CVENAC		BIT(2)
 #define TWL4030_BCIAUTOUSB	BIT(1)
 #define TWL4030_BCIAUTOAC	BIT(0)
 #define TWL4030_CGAIN		BIT(5)
@@ -81,6 +91,21 @@
 #define TWL4030_MSTATEC_COMPLETE1	0x0b
 #define TWL4030_MSTATEC_COMPLETE4	0x0e
 
+#if IS_REACHABLE(CONFIG_TWL4030_MADC)
+/*
+ * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
+ * then AC is available.
+ */
+static inline int ac_available(void)
+{
+	return twl4030_get_madc_conversion(11) > 4500;
+}
+#else
+static inline int ac_available(void)
+{
+	return 0;
+}
+#endif
 static bool allow_usb;
 module_param(allow_usb, bool, 0644);
 MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current");
@@ -94,12 +119,39 @@ struct twl4030_bci {
 	struct work_struct	work;
 	int			irq_chg;
 	int			irq_bci;
-	struct regulator	*usb_reg;
 	int			usb_enabled;
 
+	/*
+	 * ichg_* and *_cur values in uA. If any are 'large', we set
+	 * CGAIN to '1' which doubles the range for half the
+	 * precision.
+	 */
+	unsigned int		ichg_eoc, ichg_lo, ichg_hi;
+	unsigned int		usb_cur, ac_cur;
+	bool			ac_is_active;
+	int			usb_mode, ac_mode; /* charging mode requested */
+#define	CHARGE_OFF	0
+#define	CHARGE_AUTO	1
+#define	CHARGE_LINEAR	2
+
+	/* When setting the USB current we slowly increase the
+	 * requested current until target is reached or the voltage
+	 * drops below 4.75V.  In the latter case we step back one
+	 * step.
+	 */
+	unsigned int		usb_cur_target;
+	struct delayed_work	current_worker;
+#define	USB_CUR_STEP	20000	/* 20mA at a time */
+#define	USB_MIN_VOLT	4750000	/* 4.75V */
+#define	USB_CUR_DELAY	msecs_to_jiffies(100)
+#define	USB_MAX_CURRENT	1700000 /* TWL4030 caps at 1.7A */
+
 	unsigned long		event;
 };
 
+/* strings for 'usb_mode' values */
+static char *modes[] = { "off", "auto", "continuous" };
+
 /*
  * clear and set bits on an given register on a given module
  */
@@ -180,27 +232,233 @@ static int twl4030_is_battery_present(struct twl4030_bci *bci)
 }
 
 /*
- * Check if VBUS power is present
+ * TI provided formulas:
+ * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85
+ * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7
+ * Here we use integer approximation of:
+ * CGAIN == 0: val * 1.6618 - 0.85 * 1000
+ * CGAIN == 1: (val * 1.6618 - 0.85 * 1000) * 2
+ */
+/*
+ * convert twl register value for currents into uA
  */
-static int twl4030_bci_have_vbus(struct twl4030_bci *bci)
+static int regval2ua(int regval, bool cgain)
+{
+	if (cgain)
+		return (regval * 16618 - 8500 * 1000) / 5;
+	else
+		return (regval * 16618 - 8500 * 1000) / 10;
+}
+
+/*
+ * convert uA currents into twl register value
+ */
+static int ua2regval(int ua, bool cgain)
 {
 	int ret;
-	u8 hwsts;
+	if (cgain)
+		ua /= 2;
+	ret = (ua * 10 + 8500 * 1000) / 16618;
+	/* rounding problems */
+	if (ret < 512)
+		ret = 512;
+	return ret;
+}
 
-	ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &hwsts,
-			      TWL4030_PM_MASTER_STS_HW_CONDITIONS);
-	if (ret < 0)
-		return 0;
+static int twl4030_charger_update_current(struct twl4030_bci *bci)
+{
+	int status;
+	int cur;
+	unsigned reg, cur_reg;
+	u8 bcictl1, oldreg, fullreg;
+	bool cgain = false;
+	u8 boot_bci;
 
-	dev_dbg(bci->dev, "check_vbus: HW_CONDITIONS %02x\n", hwsts);
+	/*
+	 * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
+	 * and AC is enabled, set current for 'ac'
+	 */
+	if (ac_available()) {
+		cur = bci->ac_cur;
+		bci->ac_is_active = true;
+	} else {
+		cur = bci->usb_cur;
+		bci->ac_is_active = false;
+		if (cur > bci->usb_cur_target) {
+			cur = bci->usb_cur_target;
+			bci->usb_cur = cur;
+		}
+		if (cur < bci->usb_cur_target)
+			schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY);
+	}
+
+	/* First, check thresholds and see if cgain is needed */
+	if (bci->ichg_eoc >= 200000)
+		cgain = true;
+	if (bci->ichg_lo >= 400000)
+		cgain = true;
+	if (bci->ichg_hi >= 820000)
+		cgain = true;
+	if (cur > 852000)
+		cgain = true;
+
+	status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
+	if (status < 0)
+		return status;
+	if (twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &boot_bci,
+			    TWL4030_PM_MASTER_BOOT_BCI) < 0)
+		boot_bci = 0;
+	boot_bci &= 7;
+
+	if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN))
+		/* Need to turn for charging while we change the
+		 * CGAIN bit.  Leave it off while everything is
+		 * updated.
+		 */
+		twl4030_clear_set_boot_bci(boot_bci, 0);
+
+	/*
+	 * For ichg_eoc, the hardware only supports reg values matching
+	 * 100XXXX000, and requires the XXXX be stored in the high nibble
+	 * of TWL4030_BCIMFTH8.
+	 */
+	reg = ua2regval(bci->ichg_eoc, cgain);
+	if (reg > 0x278)
+		reg = 0x278;
+	if (reg < 0x200)
+		reg = 0x200;
+	reg = (reg >> 3) & 0xf;
+	fullreg = reg << 4;
+
+	/*
+	 * For ichg_lo, reg value must match 10XXXX0000.
+	 * XXXX is stored in low nibble of TWL4030_BCIMFTH8.
+	 */
+	reg = ua2regval(bci->ichg_lo, cgain);
+	if (reg > 0x2F0)
+		reg = 0x2F0;
+	if (reg < 0x200)
+		reg = 0x200;
+	reg = (reg >> 4) & 0xf;
+	fullreg |= reg;
+
+	/* ichg_eoc and ichg_lo live in same register */
+	status = twl4030_bci_read(TWL4030_BCIMFTH8, &oldreg);
+	if (status < 0)
+		return status;
+	if (oldreg != fullreg) {
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xF4,
+					  TWL4030_BCIMFKEY);
+		if (status < 0)
+			return status;
+		twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+				 fullreg, TWL4030_BCIMFTH8);
+	}
 
-	/* in case we also have STS_USB_ID, VBUS is driven by TWL itself */
-	if ((hwsts & TWL4030_STS_VBUS) && !(hwsts & TWL4030_STS_USB_ID))
-		return 1;
+	/* ichg_hi threshold must be 1XXXX01100 (I think) */
+	reg = ua2regval(bci->ichg_hi, cgain);
+	if (reg > 0x3E0)
+		reg = 0x3E0;
+	if (reg < 0x200)
+		reg = 0x200;
+	fullreg = (reg >> 5) & 0xF;
+	fullreg <<= 4;
+	status = twl4030_bci_read(TWL4030_BCIMFTH9, &oldreg);
+	if (status < 0)
+		return status;
+	if ((oldreg & 0xF0) != fullreg) {
+		fullreg |= (oldreg & 0x0F);
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+					  TWL4030_BCIMFKEY);
+		if (status < 0)
+			return status;
+		twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+				 fullreg, TWL4030_BCIMFTH9);
+	}
 
+	/*
+	 * And finally, set the current.  This is stored in
+	 * two registers.
+	 */
+	reg = ua2regval(cur, cgain);
+	/* we have only 10 bits */
+	if (reg > 0x3ff)
+		reg = 0x3ff;
+	status = twl4030_bci_read(TWL4030_BCIIREF1, &oldreg);
+	if (status < 0)
+		return status;
+	cur_reg = oldreg;
+	status = twl4030_bci_read(TWL4030_BCIIREF2, &oldreg);
+	if (status < 0)
+		return status;
+	cur_reg |= oldreg << 8;
+	if (reg != oldreg) {
+		/* disable write protection for one write access for
+		 * BCIIREF */
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+					  TWL4030_BCIMFKEY);
+		if (status < 0)
+			return status;
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+					  (reg & 0x100) ? 3 : 2,
+					  TWL4030_BCIIREF2);
+		if (status < 0)
+			return status;
+		/* disable write protection for one write access for
+		 * BCIIREF */
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+					  TWL4030_BCIMFKEY);
+		if (status < 0)
+			return status;
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+					  reg & 0xff,
+					  TWL4030_BCIIREF1);
+	}
+	if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN)) {
+		/* Flip CGAIN and re-enable charging */
+		bcictl1 ^= TWL4030_CGAIN;
+		twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+				 bcictl1, TWL4030_BCICTL1);
+		twl4030_clear_set_boot_bci(0, boot_bci);
+	}
 	return 0;
 }
 
+static int twl4030_charger_get_current(void);
+
+static void twl4030_current_worker(struct work_struct *data)
+{
+	int v, curr;
+	int res;
+	struct twl4030_bci *bci = container_of(data, struct twl4030_bci,
+					       current_worker.work);
+
+	res = twl4030bci_read_adc_val(TWL4030_BCIVBUS);
+	if (res < 0)
+		v = 0;
+	else
+		/* BCIVBUS uses ADCIN8, 7/1023 V/step */
+		v = res * 6843;
+	curr = twl4030_charger_get_current();
+
+	dev_dbg(bci->dev, "v=%d cur=%d limit=%d target=%d\n", v, curr,
+		bci->usb_cur, bci->usb_cur_target);
+
+	if (v < USB_MIN_VOLT) {
+		/* Back up and stop adjusting. */
+		bci->usb_cur -= USB_CUR_STEP;
+		bci->usb_cur_target = bci->usb_cur;
+	} else if (bci->usb_cur >= bci->usb_cur_target ||
+		   bci->usb_cur + USB_CUR_STEP > USB_MAX_CURRENT) {
+		/* Reached target and voltage is OK - stop */
+		return;
+	} else {
+		bci->usb_cur += USB_CUR_STEP;
+		schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY);
+	}
+	twl4030_charger_update_current(bci);
+}
+
 /*
  * Enable/Disable USB Charge functionality.
  */
@@ -208,45 +466,60 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 {
 	int ret;
 
-	if (enable) {
-		/* Check for USB charger connected */
-		if (!twl4030_bci_have_vbus(bci))
-			return -ENODEV;
+	if (bci->usb_mode == CHARGE_OFF)
+		enable = false;
+	if (enable && !IS_ERR_OR_NULL(bci->transceiver)) {
 
-		/*
-		 * Until we can find out what current the device can provide,
-		 * require a module param to enable USB charging.
-		 */
-		if (!allow_usb) {
-			dev_warn(bci->dev, "USB charging is disabled.\n");
-			return -EACCES;
-		}
+		twl4030_charger_update_current(bci);
 
-		/* Need to keep regulator on */
+		/* Need to keep phy powered */
 		if (!bci->usb_enabled) {
-			ret = regulator_enable(bci->usb_reg);
-			if (ret) {
-				dev_err(bci->dev,
-					"Failed to enable regulator\n");
-				return ret;
-			}
+			pm_runtime_get_sync(bci->transceiver->dev);
 			bci->usb_enabled = 1;
 		}
 
-		/* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
-		ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB);
-		if (ret < 0)
-			return ret;
+		if (bci->usb_mode == CHARGE_AUTO)
+			/* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
+			ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB);
 
 		/* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */
 		ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0,
 			TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4);
+		if (bci->usb_mode == CHARGE_LINEAR) {
+			twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0);
+			/* Watch dog key: WOVF acknowledge */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33,
+					       TWL4030_BCIWDKEY);
+			/* 0x24 + EKEY6: off mode */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a,
+					       TWL4030_BCIMDKEY);
+			/* EKEY2: Linear charge: USB path */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x26,
+					       TWL4030_BCIMDKEY);
+			/* WDKEY5: stop watchdog count */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf3,
+					       TWL4030_BCIWDKEY);
+			/* enable MFEN3 access */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x9c,
+					       TWL4030_BCIMFKEY);
+			 /* ICHGEOCEN - end-of-charge monitor (current < 80mA)
+			  *                      (charging continues)
+			  * ICHGLOWEN - current level monitor (charge continues)
+			  * don't monitor over-current or heat save
+			  */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf0,
+					       TWL4030_BCIMFEN3);
+		}
 	} else {
 		ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOUSB, 0);
+		ret |= twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a,
+					TWL4030_BCIMDKEY);
 		if (bci->usb_enabled) {
-			regulator_disable(bci->usb_reg);
+			pm_runtime_mark_last_busy(bci->transceiver->dev);
+			pm_runtime_put_autosuspend(bci->transceiver->dev);
 			bci->usb_enabled = 0;
 		}
+		bci->usb_cur = 0;
 	}
 
 	return ret;
@@ -255,10 +528,13 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 /*
  * Enable/Disable AC Charge funtionality.
  */
-static int twl4030_charger_enable_ac(bool enable)
+static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable)
 {
 	int ret;
 
+	if (bci->ac_mode == CHARGE_OFF)
+		enable = false;
+
 	if (enable)
 		ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC);
 	else
@@ -318,6 +594,9 @@ static irqreturn_t twl4030_charger_interrupt(int irq, void *arg)
 	struct twl4030_bci *bci = arg;
 
 	dev_dbg(bci->dev, "CHG_PRES irq\n");
+	/* reset current on each 'plug' event */
+	bci->ac_cur = 500000;
+	twl4030_charger_update_current(bci);
 	power_supply_changed(bci->ac);
 	power_supply_changed(bci->usb);
 
@@ -350,6 +629,7 @@ static irqreturn_t twl4030_bci_interrupt(int irq, void *arg)
 		power_supply_changed(bci->ac);
 		power_supply_changed(bci->usb);
 	}
+	twl4030_charger_update_current(bci);
 
 	/* various monitoring events, for now we just log them here */
 	if (irqs1 & (TWL4030_TBATOR2 | TWL4030_TBATOR1))
@@ -370,6 +650,63 @@ static irqreturn_t twl4030_bci_interrupt(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Provide "max_current" attribute in sysfs.
+ */
+static ssize_t
+twl4030_bci_max_current_store(struct device *dev, struct device_attribute *attr,
+	const char *buf, size_t n)
+{
+	struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
+	int cur = 0;
+	int status = 0;
+	status = kstrtoint(buf, 10, &cur);
+	if (status)
+		return status;
+	if (cur < 0)
+		return -EINVAL;
+	if (dev == &bci->ac->dev)
+		bci->ac_cur = cur;
+	else
+		bci->usb_cur_target = cur;
+
+	twl4030_charger_update_current(bci);
+	return n;
+}
+
+/*
+ * sysfs max_current show
+ */
+static ssize_t twl4030_bci_max_current_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	int status = 0;
+	int cur = -1;
+	u8 bcictl1;
+	struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
+
+	if (dev == &bci->ac->dev) {
+		if (!bci->ac_is_active)
+			cur = bci->ac_cur;
+	} else {
+		if (bci->ac_is_active)
+			cur = bci->usb_cur_target;
+	}
+	if (cur < 0) {
+		cur = twl4030bci_read_adc_val(TWL4030_BCIIREF1);
+		if (cur < 0)
+			return cur;
+		status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
+		if (status < 0)
+			return status;
+		cur = regval2ua(cur, bcictl1 & TWL4030_CGAIN);
+	}
+	return scnprintf(buf, PAGE_SIZE, "%u\n", cur);
+}
+
+static DEVICE_ATTR(max_current, 0644, twl4030_bci_max_current_show,
+			twl4030_bci_max_current_store);
+
 static void twl4030_bci_usb_work(struct work_struct *data)
 {
 	struct twl4030_bci *bci = container_of(data, struct twl4030_bci, work);
@@ -392,6 +729,12 @@ static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
 
 	dev_dbg(bci->dev, "OTG notify %lu\n", val);
 
+	/* reset current on each 'plug' event */
+	if (allow_usb)
+		bci->usb_cur_target = 500000;
+	else
+		bci->usb_cur_target = 100000;
+
 	bci->event = val;
 	schedule_work(&bci->work);
 
@@ -399,13 +742,66 @@ static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
 }
 
 /*
- * TI provided formulas:
- * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85
- * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7
- * Here we use integer approximation of:
- * CGAIN == 0: val * 1.6618 - 0.85
- * CGAIN == 1: (val * 1.6618 - 0.85) * 2
+ * sysfs charger enabled store
+ */
+static ssize_t
+twl4030_bci_mode_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t n)
+{
+	struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
+	int mode;
+	int status;
+
+	if (sysfs_streq(buf, modes[0]))
+		mode = 0;
+	else if (sysfs_streq(buf, modes[1]))
+		mode = 1;
+	else if (sysfs_streq(buf, modes[2]))
+		mode = 2;
+	else
+		return -EINVAL;
+	if (dev == &bci->ac->dev) {
+		if (mode == 2)
+			return -EINVAL;
+		twl4030_charger_enable_ac(bci, false);
+		bci->ac_mode = mode;
+		status = twl4030_charger_enable_ac(bci, true);
+	} else {
+		twl4030_charger_enable_usb(bci, false);
+		bci->usb_mode = mode;
+		status = twl4030_charger_enable_usb(bci, true);
+	}
+	return (status == 0) ? n : status;
+}
+
+/*
+ * sysfs charger enabled show
  */
+static ssize_t
+twl4030_bci_mode_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
+	int len = 0;
+	int i;
+	int mode = bci->usb_mode;
+
+	if (dev == &bci->ac->dev)
+		mode = bci->ac_mode;
+
+	for (i = 0; i < ARRAY_SIZE(modes); i++)
+		if (mode == i)
+			len += snprintf(buf+len, PAGE_SIZE-len,
+					"[%s] ", modes[i]);
+		else
+			len += snprintf(buf+len, PAGE_SIZE-len,
+					"%s ", modes[i]);
+	buf[len-1] = '\n';
+	return len;
+}
+static DEVICE_ATTR(mode, 0644, twl4030_bci_mode_show,
+		   twl4030_bci_mode_store);
+
 static int twl4030_charger_get_current(void)
 {
 	int curr;
@@ -420,11 +816,7 @@ static int twl4030_charger_get_current(void)
 	if (ret)
 		return ret;
 
-	ret = (curr * 16618 - 850 * 10000) / 10;
-	if (bcictl1 & TWL4030_CGAIN)
-		ret *= 2;
-
-	return ret;
+	return regval2ua(curr, bcictl1 & TWL4030_CGAIN);
 }
 
 /*
@@ -476,6 +868,17 @@ static int twl4030_bci_get_property(struct power_supply *psy,
 		is_charging = state & TWL4030_MSTATEC_USB;
 	else
 		is_charging = state & TWL4030_MSTATEC_AC;
+	if (!is_charging) {
+		u8 s;
+		twl4030_bci_read(TWL4030_BCIMDEN, &s);
+		if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
+			is_charging = s & 1;
+		else
+			is_charging = s & 2;
+		if (is_charging)
+			/* A little white lie */
+			state = TWL4030_MSTATEC_QUICK1;
+	}
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
@@ -574,20 +977,31 @@ static const struct power_supply_desc twl4030_bci_usb_desc = {
 	.get_property	= twl4030_bci_get_property,
 };
 
-static int __init twl4030_bci_probe(struct platform_device *pdev)
+static int twl4030_bci_probe(struct platform_device *pdev)
 {
 	struct twl4030_bci *bci;
 	const struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data;
 	int ret;
 	u32 reg;
 
-	bci = kzalloc(sizeof(*bci), GFP_KERNEL);
+	bci = devm_kzalloc(&pdev->dev, sizeof(*bci), GFP_KERNEL);
 	if (bci == NULL)
 		return -ENOMEM;
 
 	if (!pdata)
 		pdata = twl4030_bci_parse_dt(&pdev->dev);
 
+	bci->ichg_eoc = 80100; /* Stop charging when current drops to here */
+	bci->ichg_lo = 241000; /* Low threshold */
+	bci->ichg_hi = 500000; /* High threshold */
+	bci->ac_cur = 500000; /* 500mA */
+	if (allow_usb)
+		bci->usb_cur_target = 500000;  /* 500mA */
+	else
+		bci->usb_cur_target = 100000;  /* 100mA */
+	bci->usb_mode = CHARGE_AUTO;
+	bci->ac_mode = CHARGE_AUTO;
+
 	bci->dev = &pdev->dev;
 	bci->irq_chg = platform_get_irq(pdev, 0);
 	bci->irq_bci = platform_get_irq(pdev, 1);
@@ -596,47 +1010,46 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 	ret = twl4030_is_battery_present(bci);
 	if  (ret) {
 		dev_crit(&pdev->dev, "Battery was not detected:%d\n", ret);
-		goto fail_no_battery;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, bci);
 
-	bci->ac = power_supply_register(&pdev->dev, &twl4030_bci_ac_desc,
-					NULL);
+	bci->ac = devm_power_supply_register(&pdev->dev, &twl4030_bci_ac_desc,
+					     NULL);
 	if (IS_ERR(bci->ac)) {
 		ret = PTR_ERR(bci->ac);
 		dev_err(&pdev->dev, "failed to register ac: %d\n", ret);
-		goto fail_register_ac;
+		return ret;
 	}
 
-	bci->usb_reg = regulator_get(bci->dev, "bci3v1");
-
-	bci->usb = power_supply_register(&pdev->dev, &twl4030_bci_usb_desc,
-					 NULL);
+	bci->usb = devm_power_supply_register(&pdev->dev, &twl4030_bci_usb_desc,
+					      NULL);
 	if (IS_ERR(bci->usb)) {
 		ret = PTR_ERR(bci->usb);
 		dev_err(&pdev->dev, "failed to register usb: %d\n", ret);
-		goto fail_register_usb;
+		return ret;
 	}
 
-	ret = request_threaded_irq(bci->irq_chg, NULL,
+	ret = devm_request_threaded_irq(&pdev->dev, bci->irq_chg, NULL,
 			twl4030_charger_interrupt, IRQF_ONESHOT, pdev->name,
 			bci);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "could not request irq %d, status %d\n",
 			bci->irq_chg, ret);
-		goto fail_chg_irq;
+		return ret;
 	}
 
-	ret = request_threaded_irq(bci->irq_bci, NULL,
+	ret = devm_request_threaded_irq(&pdev->dev, bci->irq_bci, NULL,
 			twl4030_bci_interrupt, IRQF_ONESHOT, pdev->name, bci);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "could not request irq %d, status %d\n",
 			bci->irq_bci, ret);
-		goto fail_bci_irq;
+		return ret;
 	}
 
 	INIT_WORK(&bci->work, twl4030_bci_usb_work);
+	INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
 
 	bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
 	if (bci->dev->of_node) {
@@ -656,7 +1069,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 			       TWL4030_INTERRUPTS_BCIIMR1A);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
-		goto fail_unmask_interrupts;
+		return ret;
 	}
 
 	reg = ~(u32)(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV);
@@ -665,8 +1078,23 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 	if (ret < 0)
 		dev_warn(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
 
-	twl4030_charger_enable_ac(true);
-	twl4030_charger_enable_usb(bci, true);
+	twl4030_charger_update_current(bci);
+	if (device_create_file(&bci->usb->dev, &dev_attr_max_current))
+		dev_warn(&pdev->dev, "could not create sysfs file\n");
+	if (device_create_file(&bci->usb->dev, &dev_attr_mode))
+		dev_warn(&pdev->dev, "could not create sysfs file\n");
+	if (device_create_file(&bci->ac->dev, &dev_attr_mode))
+		dev_warn(&pdev->dev, "could not create sysfs file\n");
+	if (device_create_file(&bci->ac->dev, &dev_attr_max_current))
+		dev_warn(&pdev->dev, "could not create sysfs file\n");
+
+	twl4030_charger_enable_ac(bci, true);
+	if (!IS_ERR_OR_NULL(bci->transceiver))
+		twl4030_bci_usb_ncb(&bci->usb_nb,
+				    bci->transceiver->last_event,
+				    NULL);
+	else
+		twl4030_charger_enable_usb(bci, false);
 	if (pdata)
 		twl4030_charger_enable_backup(pdata->bb_uvolt,
 					      pdata->bb_uamp);
@@ -674,42 +1102,26 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 		twl4030_charger_enable_backup(0, 0);
 
 	return 0;
-
-fail_unmask_interrupts:
-	free_irq(bci->irq_bci, bci);
-fail_bci_irq:
-	free_irq(bci->irq_chg, bci);
-fail_chg_irq:
-	power_supply_unregister(bci->usb);
-fail_register_usb:
-	power_supply_unregister(bci->ac);
-fail_register_ac:
-fail_no_battery:
-	kfree(bci);
-
-	return ret;
 }
 
 static int __exit twl4030_bci_remove(struct platform_device *pdev)
 {
 	struct twl4030_bci *bci = platform_get_drvdata(pdev);
 
-	twl4030_charger_enable_ac(false);
+	twl4030_charger_enable_ac(bci, false);
 	twl4030_charger_enable_usb(bci, false);
 	twl4030_charger_enable_backup(0, 0);
 
+	device_remove_file(&bci->usb->dev, &dev_attr_max_current);
+	device_remove_file(&bci->usb->dev, &dev_attr_mode);
+	device_remove_file(&bci->ac->dev, &dev_attr_max_current);
+	device_remove_file(&bci->ac->dev, &dev_attr_mode);
 	/* mask interrupts */
 	twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
 			 TWL4030_INTERRUPTS_BCIIMR1A);
 	twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
 			 TWL4030_INTERRUPTS_BCIIMR2A);
 
-	free_irq(bci->irq_bci, bci);
-	free_irq(bci->irq_chg, bci);
-	power_supply_unregister(bci->usb);
-	power_supply_unregister(bci->ac);
-	kfree(bci);
-
 	return 0;
 }
 
@@ -720,14 +1132,14 @@ static const struct of_device_id twl_bci_of_match[] = {
 MODULE_DEVICE_TABLE(of, twl_bci_of_match);
 
 static struct platform_driver twl4030_bci_driver = {
+	.probe = twl4030_bci_probe,
 	.driver	= {
 		.name	= "twl4030_bci",
 		.of_match_table = of_match_ptr(twl_bci_of_match),
 	},
 	.remove	= __exit_p(twl4030_bci_remove),
 };
-
-module_platform_driver_probe(twl4030_bci_driver, twl4030_bci_probe);
+module_platform_driver(twl4030_bci_driver);
 
 MODULE_AUTHOR("Gražvydas Ignotas");
 MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver");