Initial import

1 files changed, 348 insertions, 0 deletions

diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
new file mode 100644
index 000000000..66d6f0c5c
--- /dev/null
+++ b/drivers/pwm/pwm-imx.c
@@ -0,0 +1,348 @@
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC			0x00   /* PWM Control Register */
+#define MX1_PWMS			0x04   /* PWM Sample Register */
+#define MX1_PWMP			0x08   /* PWM Period Register */
+
+#define MX1_PWMC_EN			(1 << 4)
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR			0x00    /* PWM Control Register */
+#define MX3_PWMSR			0x04    /* PWM Status Register */
+#define MX3_PWMSAR			0x0C    /* PWM Sample Register */
+#define MX3_PWMPR			0x10    /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x)		((((x) - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN		(1 << 24)
+#define MX3_PWMCR_WAITEN		(1 << 23)
+#define MX3_PWMCR_DBGEN			(1 << 22)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG		(1 << 16)
+#define MX3_PWMCR_SWR			(1 << 3)
+#define MX3_PWMCR_EN			(1 << 0)
+#define MX3_PWMSR_FIFOAV_4WORDS		0x4
+#define MX3_PWMSR_FIFOAV_MASK		0x7
+
+#define MX3_PWM_SWR_LOOP		5
+
+struct imx_chip {
+	struct clk	*clk_per;
+	struct clk	*clk_ipg;
+
+	void __iomem	*mmio_base;
+
+	struct pwm_chip	chip;
+
+	int (*config)(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns);
+	void (*set_enable)(struct pwm_chip *chip, bool enable);
+};
+
+#define to_imx_chip(chip)	container_of(chip, struct imx_chip, chip)
+
+static int imx_pwm_config_v1(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+
+	/*
+	 * The PWM subsystem allows for exact frequencies. However,
+	 * I cannot connect a scope on my device to the PWM line and
+	 * thus cannot provide the program the PWM controller
+	 * exactly. Instead, I'm relying on the fact that the
+	 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+	 * function group already. So I'll just modify the PWM sample
+	 * register to follow the ratio of duty_ns vs. period_ns
+	 * accordingly.
+	 *
+	 * This is good enough for programming the brightness of
+	 * the LCD backlight.
+	 *
+	 * The real implementation would divide PERCLK[0] first by
+	 * both the prescaler (/1 .. /128) and then by CLKSEL
+	 * (/2 .. /16).
+	 */
+	u32 max = readl(imx->mmio_base + MX1_PWMP);
+	u32 p = max * duty_ns / period_ns;
+	writel(max - p, imx->mmio_base + MX1_PWMS);
+
+	return 0;
+}
+
+static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	u32 val;
+
+	val = readl(imx->mmio_base + MX1_PWMC);
+
+	if (enable)
+		val |= MX1_PWMC_EN;
+	else
+		val &= ~MX1_PWMC_EN;
+
+	writel(val, imx->mmio_base + MX1_PWMC);
+}
+
+static int imx_pwm_config_v2(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	struct device *dev = chip->dev;
+	unsigned long long c;
+	unsigned long period_cycles, duty_cycles, prescale;
+	unsigned int period_ms;
+	bool enable = test_bit(PWMF_ENABLED, &pwm->flags);
+	int wait_count = 0, fifoav;
+	u32 cr, sr;
+
+	/*
+	 * i.MX PWMv2 has a 4-word sample FIFO.
+	 * In order to avoid FIFO overflow issue, we do software reset
+	 * to clear all sample FIFO if the controller is disabled or
+	 * wait for a full PWM cycle to get a relinquished FIFO slot
+	 * when the controller is enabled and the FIFO is fully loaded.
+	 */
+	if (enable) {
+		sr = readl(imx->mmio_base + MX3_PWMSR);
+		fifoav = sr & MX3_PWMSR_FIFOAV_MASK;
+		if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
+			period_ms = DIV_ROUND_UP(pwm->period, NSEC_PER_MSEC);
+			msleep(period_ms);
+
+			sr = readl(imx->mmio_base + MX3_PWMSR);
+			if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK))
+				dev_warn(dev, "there is no free FIFO slot\n");
+		}
+	} else {
+		writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
+		do {
+			usleep_range(200, 1000);
+			cr = readl(imx->mmio_base + MX3_PWMCR);
+		} while ((cr & MX3_PWMCR_SWR) &&
+			 (wait_count++ < MX3_PWM_SWR_LOOP));
+
+		if (cr & MX3_PWMCR_SWR)
+			dev_warn(dev, "software reset timeout\n");
+	}
+
+	c = clk_get_rate(imx->clk_per);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	prescale = period_cycles / 0x10000 + 1;
+
+	period_cycles /= prescale;
+	c = (unsigned long long)period_cycles * duty_ns;
+	do_div(c, period_ns);
+	duty_cycles = c;
+
+	/*
+	 * according to imx pwm RM, the real period value should be
+	 * PERIOD value in PWMPR plus 2.
+	 */
+	if (period_cycles > 2)
+		period_cycles -= 2;
+	else
+		period_cycles = 0;
+
+	writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
+	writel(period_cycles, imx->mmio_base + MX3_PWMPR);
+
+	cr = MX3_PWMCR_PRESCALER(prescale) |
+		MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+		MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+	if (enable)
+		cr |= MX3_PWMCR_EN;
+
+	writel(cr, imx->mmio_base + MX3_PWMCR);
+
+	return 0;
+}
+
+static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	u32 val;
+
+	val = readl(imx->mmio_base + MX3_PWMCR);
+
+	if (enable)
+		val |= MX3_PWMCR_EN;
+	else
+		val &= ~MX3_PWMCR_EN;
+
+	writel(val, imx->mmio_base + MX3_PWMCR);
+}
+
+static int imx_pwm_config(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	int ret;
+
+	ret = clk_prepare_enable(imx->clk_ipg);
+	if (ret)
+		return ret;
+
+	ret = imx->config(chip, pwm, duty_ns, period_ns);
+
+	clk_disable_unprepare(imx->clk_ipg);
+
+	return ret;
+}
+
+static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	int ret;
+
+	ret = clk_prepare_enable(imx->clk_per);
+	if (ret)
+		return ret;
+
+	imx->set_enable(chip, true);
+
+	return 0;
+}
+
+static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+
+	imx->set_enable(chip, false);
+
+	clk_disable_unprepare(imx->clk_per);
+}
+
+static struct pwm_ops imx_pwm_ops = {
+	.enable = imx_pwm_enable,
+	.disable = imx_pwm_disable,
+	.config = imx_pwm_config,
+	.owner = THIS_MODULE,
+};
+
+struct imx_pwm_data {
+	int (*config)(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns);
+	void (*set_enable)(struct pwm_chip *chip, bool enable);
+};
+
+static struct imx_pwm_data imx_pwm_data_v1 = {
+	.config = imx_pwm_config_v1,
+	.set_enable = imx_pwm_set_enable_v1,
+};
+
+static struct imx_pwm_data imx_pwm_data_v2 = {
+	.config = imx_pwm_config_v2,
+	.set_enable = imx_pwm_set_enable_v2,
+};
+
+static const struct of_device_id imx_pwm_dt_ids[] = {
+	{ .compatible = "fsl,imx1-pwm", .data = &imx_pwm_data_v1, },
+	{ .compatible = "fsl,imx27-pwm", .data = &imx_pwm_data_v2, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_pwm_dt_ids);
+
+static int imx_pwm_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+			of_match_device(imx_pwm_dt_ids, &pdev->dev);
+	const struct imx_pwm_data *data;
+	struct imx_chip *imx;
+	struct resource *r;
+	int ret = 0;
+
+	if (!of_id)
+		return -ENODEV;
+
+	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
+	if (imx == NULL)
+		return -ENOMEM;
+
+	imx->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(imx->clk_per)) {
+		dev_err(&pdev->dev, "getting per clock failed with %ld\n",
+				PTR_ERR(imx->clk_per));
+		return PTR_ERR(imx->clk_per);
+	}
+
+	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(imx->clk_ipg)) {
+		dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
+				PTR_ERR(imx->clk_ipg));
+		return PTR_ERR(imx->clk_ipg);
+	}
+
+	imx->chip.ops = &imx_pwm_ops;
+	imx->chip.dev = &pdev->dev;
+	imx->chip.base = -1;
+	imx->chip.npwm = 1;
+	imx->chip.can_sleep = true;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	imx->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(imx->mmio_base))
+		return PTR_ERR(imx->mmio_base);
+
+	data = of_id->data;
+	imx->config = data->config;
+	imx->set_enable = data->set_enable;
+
+	ret = pwmchip_add(&imx->chip);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, imx);
+	return 0;
+}
+
+static int imx_pwm_remove(struct platform_device *pdev)
+{
+	struct imx_chip *imx;
+
+	imx = platform_get_drvdata(pdev);
+	if (imx == NULL)
+		return -ENODEV;
+
+	return pwmchip_remove(&imx->chip);
+}
+
+static struct platform_driver imx_pwm_driver = {
+	.driver		= {
+		.name	= "imx-pwm",
+		.of_match_table = imx_pwm_dt_ids,
+	},
+	.probe		= imx_pwm_probe,
+	.remove		= imx_pwm_remove,
+};
+
+module_platform_driver(imx_pwm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");