summaryrefslogtreecommitdiff
path: root/drivers/regulator/rk808-regulator.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-12-15 14:52:16 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-12-15 14:52:16 -0300
commit8d91c1e411f55d7ea91b1183a2e9f8088fb4d5be (patch)
treee9891aa6c295060d065adffd610c4f49ecf884f3 /drivers/regulator/rk808-regulator.c
parenta71852147516bc1cb5b0b3cbd13639bfd4022dc8 (diff)
Linux-libre 4.3.2-gnu
Diffstat (limited to 'drivers/regulator/rk808-regulator.c')
-rw-r--r--drivers/regulator/rk808-regulator.c212
1 files changed, 200 insertions, 12 deletions
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 3fd44353c..d86a3dcd6 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -16,12 +16,16 @@
* more details.
*/
-#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/i2c.h>
-#include <linux/mfd/rk808.h>
+#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/mfd/rk808.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
+#include <linux/gpio/consumer.h>
/* Field Definitions */
#define RK808_BUCK_VSEL_MASK 0x3f
@@ -36,12 +40,25 @@
#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)
+#define RK808_DVS2_POL BIT(2)
+#define RK808_DVS1_POL BIT(1)
+
/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
#define RK808_SLP_REG_OFFSET 1
+/* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
+#define RK808_DVS_REG_OFFSET 2
+
/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
#define RK808_SLP_SET_OFF_REG_OFFSET 2
+/* max steps for increase voltage of Buck1/2, equal 100mv*/
+#define MAX_STEPS_ONE_TIME 8
+
+struct rk808_regulator_data {
+ struct gpio_desc *dvs_gpio[2];
+};
+
static const int rk808_buck_config_regs[] = {
RK808_BUCK1_CONFIG_REG,
RK808_BUCK2_CONFIG_REG,
@@ -70,6 +87,131 @@ static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
};
+static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
+{
+ struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
+ int id = rdev->desc->id - RK808_ID_DCDC1;
+ struct gpio_desc *gpio = pdata->dvs_gpio[id];
+ unsigned int val;
+ int ret;
+
+ if (!gpio || gpiod_get_value(gpio) == 0)
+ return regulator_get_voltage_sel_regmap(rdev);
+
+ ret = regmap_read(rdev->regmap,
+ rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
+ &val);
+ if (ret != 0)
+ return ret;
+
+ val &= rdev->desc->vsel_mask;
+ val >>= ffs(rdev->desc->vsel_mask) - 1;
+
+ return val;
+}
+
+static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned sel)
+{
+ int ret, delta_sel;
+ unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
+ if (ret != 0)
+ return ret;
+
+ tmp = val & ~mask;
+ old_sel = val & mask;
+ old_sel >>= ffs(mask) - 1;
+ delta_sel = sel - old_sel;
+
+ /*
+ * If directly modify the register to change the voltage, we will face
+ * the risk of overshoot. Put it into a multi-step, can effectively
+ * avoid this problem, a step is 100mv here.
+ */
+ while (delta_sel > MAX_STEPS_ONE_TIME) {
+ old_sel += MAX_STEPS_ONE_TIME;
+ val = old_sel << (ffs(mask) - 1);
+ val |= tmp;
+
+ /*
+ * i2c is 400kHz (2.5us per bit) and we must transmit _at least_
+ * 3 bytes (24 bits) plus start and stop so 26 bits. So we've
+ * got more than 65 us between each voltage change and thus
+ * won't ramp faster than ~1500 uV / us.
+ */
+ ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
+ delta_sel = sel - old_sel;
+ }
+
+ sel <<= ffs(mask) - 1;
+ val = tmp | sel;
+ ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
+
+ /*
+ * When we change the voltage register directly, the ramp rate is about
+ * 100000uv/us, wait 1us to make sure the target voltage to be stable,
+ * so we needn't wait extra time after that.
+ */
+ udelay(1);
+
+ return ret;
+}
+
+static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned sel)
+{
+ struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
+ int id = rdev->desc->id - RK808_ID_DCDC1;
+ struct gpio_desc *gpio = pdata->dvs_gpio[id];
+ unsigned int reg = rdev->desc->vsel_reg;
+ unsigned old_sel;
+ int ret, gpio_level;
+
+ if (!gpio)
+ return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);
+
+ gpio_level = gpiod_get_value(gpio);
+ if (gpio_level == 0) {
+ reg += RK808_DVS_REG_OFFSET;
+ ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
+ } else {
+ ret = regmap_read(rdev->regmap,
+ reg + RK808_DVS_REG_OFFSET,
+ &old_sel);
+ }
+
+ if (ret != 0)
+ return ret;
+
+ sel <<= ffs(rdev->desc->vsel_mask) - 1;
+ sel |= old_sel & ~rdev->desc->vsel_mask;
+
+ ret = regmap_write(rdev->regmap, reg, sel);
+ if (ret)
+ return ret;
+
+ gpiod_set_value(gpio, !gpio_level);
+
+ return ret;
+}
+
+static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector)
+{
+ struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
+ int id = rdev->desc->id - RK808_ID_DCDC1;
+ struct gpio_desc *gpio = pdata->dvs_gpio[id];
+
+ /* if there is no dvs1/2 pin, we don't need wait extra time here. */
+ if (!gpio)
+ return 0;
+
+ return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
+}
+
static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
@@ -137,8 +279,9 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
static struct regulator_ops rk808_buck1_2_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
+ .set_voltage_sel = rk808_buck1_2_set_voltage_sel,
+ .set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -380,25 +523,69 @@ static struct of_regulator_match rk808_reg_matches[] = {
[RK808_ID_SWITCH2] = { .name = "SWITCH_REG2" },
};
+static int rk808_regulator_dt_parse_pdata(struct device *dev,
+ struct device *client_dev,
+ struct regmap *map,
+ struct rk808_regulator_data *pdata)
+{
+ struct device_node *np;
+ int tmp, ret, i;
+
+ np = of_get_child_by_name(client_dev->of_node, "regulators");
+ if (!np)
+ return -ENXIO;
+
+ ret = of_regulator_match(dev, np, rk808_reg_matches,
+ RK808_NUM_REGULATORS);
+ if (ret < 0)
+ goto dt_parse_end;
+
+ for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
+ pdata->dvs_gpio[i] =
+ devm_gpiod_get_index_optional(client_dev, "dvs", i,
+ GPIOD_OUT_LOW);
+ if (IS_ERR(pdata->dvs_gpio[i])) {
+ ret = PTR_ERR(pdata->dvs_gpio[i]);
+ dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
+ goto dt_parse_end;
+ }
+
+ if (!pdata->dvs_gpio[i]) {
+ dev_warn(dev, "there is no dvs%d gpio\n", i);
+ continue;
+ }
+
+ tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
+ ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
+ gpiod_is_active_low(pdata->dvs_gpio[i]) ?
+ 0 : tmp);
+ }
+
+dt_parse_end:
+ of_node_put(np);
+ return ret;
+}
+
static int rk808_regulator_probe(struct platform_device *pdev)
{
struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
struct i2c_client *client = rk808->i2c;
- struct device_node *reg_np;
struct regulator_config config = {};
struct regulator_dev *rk808_rdev;
+ struct rk808_regulator_data *pdata;
int ret, i;
- reg_np = of_get_child_by_name(client->dev.of_node, "regulators");
- if (!reg_np)
- return -ENXIO;
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
- ret = of_regulator_match(&pdev->dev, reg_np, rk808_reg_matches,
- RK808_NUM_REGULATORS);
- of_node_put(reg_np);
+ ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
+ rk808->regmap, pdata);
if (ret < 0)
return ret;
+ platform_set_drvdata(pdev, pdata);
+
/* Instantiate the regulators */
for (i = 0; i < RK808_NUM_REGULATORS; i++) {
if (!rk808_reg_matches[i].init_data ||
@@ -406,7 +593,7 @@ static int rk808_regulator_probe(struct platform_device *pdev)
continue;
config.dev = &client->dev;
- config.driver_data = rk808;
+ config.driver_data = pdata;
config.regmap = rk808->regmap;
config.of_node = rk808_reg_matches[i].of_node;
config.init_data = rk808_reg_matches[i].init_data;
@@ -427,6 +614,7 @@ static struct platform_driver rk808_regulator_driver = {
.probe = rk808_regulator_probe,
.driver = {
.name = "rk808-regulator",
+ .owner = THIS_MODULE,
},
};