Initial import

1 files changed, 533 insertions, 0 deletions

diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
new file mode 100644
index 000000000..395f35dc8
--- /dev/null
+++ b/drivers/regulator/tps65090-regulator.c
@@ -0,0 +1,533 @@
+/*
+ * Regulator driver for tps65090 power management chip.
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/tps65090.h>
+
+#define MAX_CTRL_READ_TRIES	5
+#define MAX_FET_ENABLE_TRIES	1000
+
+#define CTRL_EN_BIT		0 /* Regulator enable bit, active high */
+#define CTRL_WT_BIT		2 /* Regulator wait time 0 bit */
+#define CTRL_PG_BIT		4 /* Regulator power good bit, 1=good */
+#define CTRL_TO_BIT		7 /* Regulator timeout bit, 1=wait */
+
+#define MAX_OVERCURRENT_WAIT	3 /* Overcurrent wait must be <= this */
+
+/**
+ * struct tps65090_regulator - Per-regulator data for a tps65090 regulator
+ *
+ * @dev: Pointer to our device.
+ * @desc: The struct regulator_desc for the regulator.
+ * @rdev: The struct regulator_dev for the regulator.
+ * @overcurrent_wait_valid: True if overcurrent_wait is valid.
+ * @overcurrent_wait: For FETs, the value to put in the WTFET bitfield.
+ */
+
+struct tps65090_regulator {
+	struct device		*dev;
+	struct regulator_desc	*desc;
+	struct regulator_dev	*rdev;
+	bool			overcurrent_wait_valid;
+	int			overcurrent_wait;
+};
+
+static struct regulator_ops tps65090_ext_control_ops = {
+};
+
+/**
+ * tps65090_reg_set_overcurrent_wait - Setup overcurrent wait
+ *
+ * This will set the overcurrent wait time based on what's in the regulator
+ * info.
+ *
+ * @ri:		Overall regulator data
+ * @rdev:	Regulator device
+ *
+ * Return: 0 if no error, non-zero if there was an error writing the register.
+ */
+static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator *ri,
+					     struct regulator_dev *rdev)
+{
+	int ret;
+
+	ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+				 MAX_OVERCURRENT_WAIT << CTRL_WT_BIT,
+				 ri->overcurrent_wait << CTRL_WT_BIT);
+	if (ret) {
+		dev_err(&rdev->dev, "Error updating overcurrent wait %#x\n",
+			rdev->desc->enable_reg);
+	}
+
+	return ret;
+}
+
+/**
+ * tps65090_try_enable_fet - Try to enable a FET
+ *
+ * @rdev:	Regulator device
+ *
+ * Return: 0 if ok, -ENOTRECOVERABLE if the FET power good bit did not get
+ * set, or some other -ve value if another error occurred (e.g. i2c error)
+ */
+static int tps65090_try_enable_fet(struct regulator_dev *rdev)
+{
+	unsigned int control;
+	int ret, i;
+
+	ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+				 rdev->desc->enable_mask,
+				 rdev->desc->enable_mask);
+	if (ret < 0) {
+		dev_err(&rdev->dev, "Error in updating reg %#x\n",
+			rdev->desc->enable_reg);
+		return ret;
+	}
+
+	for (i = 0; i < MAX_CTRL_READ_TRIES; i++) {
+		ret = regmap_read(rdev->regmap, rdev->desc->enable_reg,
+				  &control);
+		if (ret < 0)
+			return ret;
+
+		if (!(control & BIT(CTRL_TO_BIT)))
+			break;
+
+		usleep_range(1000, 1500);
+	}
+	if (!(control & BIT(CTRL_PG_BIT)))
+		return -ENOTRECOVERABLE;
+
+	return 0;
+}
+
+/**
+ * tps65090_fet_enable - Enable a FET, trying a few times if it fails
+ *
+ * Some versions of the tps65090 have issues when turning on the FETs.
+ * This function goes through several steps to ensure the best chance of the
+ * FET going on.  Specifically:
+ * - We'll make sure that we bump the "overcurrent wait" to the maximum, which
+ *   increases the chances that we'll turn on properly.
+ * - We'll retry turning the FET on multiple times (turning off in between).
+ *
+ * @rdev:	Regulator device
+ *
+ * Return: 0 if ok, non-zero if it fails.
+ */
+static int tps65090_fet_enable(struct regulator_dev *rdev)
+{
+	int ret, tries;
+
+	/*
+	 * Try enabling multiple times until we succeed since sometimes the
+	 * first try times out.
+	 */
+	tries = 0;
+	while (true) {
+		ret = tps65090_try_enable_fet(rdev);
+		if (!ret)
+			break;
+		if (ret != -ENOTRECOVERABLE || tries == MAX_FET_ENABLE_TRIES)
+			goto err;
+
+		/* Try turning the FET off (and then on again) */
+		ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+					 rdev->desc->enable_mask, 0);
+		if (ret)
+			goto err;
+
+		tries++;
+	}
+
+	if (tries)
+		dev_warn(&rdev->dev, "reg %#x enable ok after %d tries\n",
+			 rdev->desc->enable_reg, tries);
+
+	return 0;
+err:
+	dev_warn(&rdev->dev, "reg %#x enable failed\n", rdev->desc->enable_reg);
+	WARN_ON(1);
+
+	return ret;
+}
+
+static struct regulator_ops tps65090_reg_control_ops = {
+	.enable		= regulator_enable_regmap,
+	.disable	= regulator_disable_regmap,
+	.is_enabled	= regulator_is_enabled_regmap,
+};
+
+static struct regulator_ops tps65090_fet_control_ops = {
+	.enable		= tps65090_fet_enable,
+	.disable	= regulator_disable_regmap,
+	.is_enabled	= regulator_is_enabled_regmap,
+};
+
+static struct regulator_ops tps65090_ldo_ops = {
+};
+
+#define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _nvolt, _volt, _ops) \
+{							\
+	.name = "TPS65090_RAILS"#_id,			\
+	.supply_name = _sname,				\
+	.id = TPS65090_REGULATOR_##_id,			\
+	.n_voltages = _nvolt,				\
+	.ops = &_ops,					\
+	.fixed_uV = _volt,				\
+	.enable_reg = _en_reg,				\
+	.enable_val = _en_bits,				\
+	.enable_mask = _en_bits,			\
+	.type = REGULATOR_VOLTAGE,			\
+	.owner = THIS_MODULE,				\
+}
+
+#define tps65090_REG_FIXEDV(_id, _sname, en_reg, _en_bits, _volt, _ops) \
+	tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 1, _volt, _ops)
+
+#define tps65090_REG_SWITCH(_id, _sname, en_reg, _en_bits, _ops) \
+	tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 0, 0, _ops)
+
+static struct regulator_desc tps65090_regulator_desc[] = {
+	tps65090_REG_FIXEDV(DCDC1, "vsys1",   0x0C, BIT(CTRL_EN_BIT), 5000000,
+			    tps65090_reg_control_ops),
+	tps65090_REG_FIXEDV(DCDC2, "vsys2",   0x0D, BIT(CTRL_EN_BIT), 3300000,
+			    tps65090_reg_control_ops),
+	tps65090_REG_SWITCH(DCDC3, "vsys3",   0x0E, BIT(CTRL_EN_BIT),
+			    tps65090_reg_control_ops),
+
+	tps65090_REG_SWITCH(FET1,  "infet1",  0x0F,
+			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+			    tps65090_fet_control_ops),
+	tps65090_REG_SWITCH(FET2,  "infet2",  0x10,
+			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+			    tps65090_fet_control_ops),
+	tps65090_REG_SWITCH(FET3,  "infet3",  0x11,
+			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+			    tps65090_fet_control_ops),
+	tps65090_REG_SWITCH(FET4,  "infet4",  0x12,
+			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+			    tps65090_fet_control_ops),
+	tps65090_REG_SWITCH(FET5,  "infet5",  0x13,
+			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+			    tps65090_fet_control_ops),
+	tps65090_REG_SWITCH(FET6,  "infet6",  0x14,
+			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+			    tps65090_fet_control_ops),
+	tps65090_REG_SWITCH(FET7,  "infet7",  0x15,
+			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
+			    tps65090_fet_control_ops),
+
+	tps65090_REG_FIXEDV(LDO1,  "vsys-l1", 0, 0, 5000000,
+			    tps65090_ldo_ops),
+	tps65090_REG_FIXEDV(LDO2,  "vsys-l2", 0, 0, 3300000,
+			    tps65090_ldo_ops),
+};
+
+static inline bool is_dcdc(int id)
+{
+	switch (id) {
+	case TPS65090_REGULATOR_DCDC1:
+	case TPS65090_REGULATOR_DCDC2:
+	case TPS65090_REGULATOR_DCDC3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int tps65090_config_ext_control(
+	struct tps65090_regulator *ri, bool enable)
+{
+	int ret;
+	struct device *parent = ri->dev->parent;
+	unsigned int reg_en_reg = ri->desc->enable_reg;
+
+	if (enable)
+		ret = tps65090_set_bits(parent, reg_en_reg, 1);
+	else
+		ret =  tps65090_clr_bits(parent, reg_en_reg, 1);
+	if (ret < 0)
+		dev_err(ri->dev, "Error in updating reg 0x%x\n", reg_en_reg);
+	return ret;
+}
+
+static int tps65090_regulator_disable_ext_control(
+		struct tps65090_regulator *ri,
+		struct tps65090_regulator_plat_data *tps_pdata)
+{
+	int ret = 0;
+	struct device *parent = ri->dev->parent;
+	unsigned int reg_en_reg = ri->desc->enable_reg;
+
+	/*
+	 * First enable output for internal control if require.
+	 * And then disable external control.
+	 */
+	if (tps_pdata->reg_init_data->constraints.always_on ||
+			tps_pdata->reg_init_data->constraints.boot_on) {
+		ret =  tps65090_set_bits(parent, reg_en_reg, 0);
+		if (ret < 0) {
+			dev_err(ri->dev, "Error in set reg 0x%x\n", reg_en_reg);
+			return ret;
+		}
+	}
+	return tps65090_config_ext_control(ri, false);
+}
+
+static void tps65090_configure_regulator_config(
+		struct tps65090_regulator_plat_data *tps_pdata,
+		struct regulator_config *config)
+{
+	if (gpio_is_valid(tps_pdata->gpio)) {
+		int gpio_flag = GPIOF_OUT_INIT_LOW;
+
+		if (tps_pdata->reg_init_data->constraints.always_on ||
+				tps_pdata->reg_init_data->constraints.boot_on)
+			gpio_flag = GPIOF_OUT_INIT_HIGH;
+
+		config->ena_gpio = tps_pdata->gpio;
+		config->ena_gpio_initialized = true;
+		config->ena_gpio_flags = gpio_flag;
+	} else {
+		config->ena_gpio = -EINVAL;
+		config->ena_gpio_initialized = false;
+	}
+}
+
+#ifdef CONFIG_OF
+static struct of_regulator_match tps65090_matches[] = {
+	{ .name = "dcdc1", },
+	{ .name = "dcdc2", },
+	{ .name = "dcdc3", },
+	{ .name = "fet1",  },
+	{ .name = "fet2",  },
+	{ .name = "fet3",  },
+	{ .name = "fet4",  },
+	{ .name = "fet5",  },
+	{ .name = "fet6",  },
+	{ .name = "fet7",  },
+	{ .name = "ldo1",  },
+	{ .name = "ldo2",  },
+};
+
+static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
+		struct platform_device *pdev,
+		struct of_regulator_match **tps65090_reg_matches)
+{
+	struct tps65090_platform_data *tps65090_pdata;
+	struct device_node *np = pdev->dev.parent->of_node;
+	struct device_node *regulators;
+	int idx = 0, ret;
+	struct tps65090_regulator_plat_data *reg_pdata;
+
+	tps65090_pdata = devm_kzalloc(&pdev->dev, sizeof(*tps65090_pdata),
+				GFP_KERNEL);
+	if (!tps65090_pdata)
+		return ERR_PTR(-ENOMEM);
+
+	reg_pdata = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX *
+				sizeof(*reg_pdata), GFP_KERNEL);
+	if (!reg_pdata)
+		return ERR_PTR(-ENOMEM);
+
+	regulators = of_get_child_by_name(np, "regulators");
+	if (!regulators) {
+		dev_err(&pdev->dev, "regulator node not found\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	ret = of_regulator_match(&pdev->dev, regulators, tps65090_matches,
+			ARRAY_SIZE(tps65090_matches));
+	of_node_put(regulators);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Error parsing regulator init data: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	*tps65090_reg_matches = tps65090_matches;
+	for (idx = 0; idx < ARRAY_SIZE(tps65090_matches); idx++) {
+		struct regulator_init_data *ri_data;
+		struct tps65090_regulator_plat_data *rpdata;
+
+		rpdata = &reg_pdata[idx];
+		ri_data = tps65090_matches[idx].init_data;
+		if (!ri_data || !tps65090_matches[idx].of_node)
+			continue;
+
+		rpdata->reg_init_data = ri_data;
+		rpdata->enable_ext_control = of_property_read_bool(
+					tps65090_matches[idx].of_node,
+					"ti,enable-ext-control");
+		if (rpdata->enable_ext_control)
+			rpdata->gpio = of_get_named_gpio(np,
+					"dcdc-ext-control-gpios", 0);
+
+		if (of_property_read_u32(tps65090_matches[idx].of_node,
+					 "ti,overcurrent-wait",
+					 &rpdata->overcurrent_wait) == 0)
+			rpdata->overcurrent_wait_valid = true;
+
+		tps65090_pdata->reg_pdata[idx] = rpdata;
+	}
+	return tps65090_pdata;
+}
+#else
+static inline struct tps65090_platform_data *tps65090_parse_dt_reg_data(
+			struct platform_device *pdev,
+			struct of_regulator_match **tps65090_reg_matches)
+{
+	*tps65090_reg_matches = NULL;
+	return NULL;
+}
+#endif
+
+static int tps65090_regulator_probe(struct platform_device *pdev)
+{
+	struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent);
+	struct tps65090_regulator *ri = NULL;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct tps65090_regulator_plat_data *tps_pdata;
+	struct tps65090_regulator *pmic;
+	struct tps65090_platform_data *tps65090_pdata;
+	struct of_regulator_match *tps65090_reg_matches = NULL;
+	int num;
+	int ret;
+
+	dev_dbg(&pdev->dev, "Probing regulator\n");
+
+	tps65090_pdata = dev_get_platdata(pdev->dev.parent);
+	if (!tps65090_pdata && tps65090_mfd->dev->of_node)
+		tps65090_pdata = tps65090_parse_dt_reg_data(pdev,
+					&tps65090_reg_matches);
+	if (IS_ERR_OR_NULL(tps65090_pdata)) {
+		dev_err(&pdev->dev, "Platform data missing\n");
+		return tps65090_pdata ? PTR_ERR(tps65090_pdata) : -EINVAL;
+	}
+
+	pmic = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * sizeof(*pmic),
+			GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+
+	for (num = 0; num < TPS65090_REGULATOR_MAX; num++) {
+		tps_pdata = tps65090_pdata->reg_pdata[num];
+
+		ri = &pmic[num];
+		ri->dev = &pdev->dev;
+		ri->desc = &tps65090_regulator_desc[num];
+		if (tps_pdata) {
+			ri->overcurrent_wait_valid =
+				tps_pdata->overcurrent_wait_valid;
+			ri->overcurrent_wait = tps_pdata->overcurrent_wait;
+		}
+
+		/*
+		 * TPS5090 DCDC support the control from external digital input.
+		 * Configure it as per platform data.
+		 */
+		if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data) {
+			if (tps_pdata->enable_ext_control) {
+				tps65090_configure_regulator_config(
+						tps_pdata, &config);
+				ri->desc->ops = &tps65090_ext_control_ops;
+			} else {
+				ret = tps65090_regulator_disable_ext_control(
+						ri, tps_pdata);
+				if (ret < 0) {
+					dev_err(&pdev->dev,
+						"failed disable ext control\n");
+					return ret;
+				}
+			}
+		}
+
+		config.dev = pdev->dev.parent;
+		config.driver_data = ri;
+		config.regmap = tps65090_mfd->rmap;
+		if (tps_pdata)
+			config.init_data = tps_pdata->reg_init_data;
+		else
+			config.init_data = NULL;
+		if (tps65090_reg_matches)
+			config.of_node = tps65090_reg_matches[num].of_node;
+		else
+			config.of_node = NULL;
+
+		rdev = devm_regulator_register(&pdev->dev, ri->desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+				ri->desc->name);
+			return PTR_ERR(rdev);
+		}
+		ri->rdev = rdev;
+
+		if (ri->overcurrent_wait_valid) {
+			ret = tps65090_reg_set_overcurrent_wait(ri, rdev);
+			if (ret < 0)
+				return ret;
+		}
+
+		/* Enable external control if it is require */
+		if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data &&
+				tps_pdata->enable_ext_control) {
+			ret = tps65090_config_ext_control(ri, true);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	platform_set_drvdata(pdev, pmic);
+	return 0;
+}
+
+static struct platform_driver tps65090_regulator_driver = {
+	.driver	= {
+		.name	= "tps65090-pmic",
+	},
+	.probe		= tps65090_regulator_probe,
+};
+
+static int __init tps65090_regulator_init(void)
+{
+	return platform_driver_register(&tps65090_regulator_driver);
+}
+subsys_initcall(tps65090_regulator_init);
+
+static void __exit tps65090_regulator_exit(void)
+{
+	platform_driver_unregister(&tps65090_regulator_driver);
+}
+module_exit(tps65090_regulator_exit);
+
+MODULE_DESCRIPTION("tps65090 regulator driver");
+MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tps65090-pmic");