Linux-libre 4.7.1-gnupck-4.7.1-gnu

29 files changed, 1764 insertions, 565 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c77dc08b1..144cbf5b3 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -321,6 +321,15 @@ config REGULATOR_LP872X
 	help
 	  This driver supports LP8720/LP8725 PMIC
 
+config REGULATOR_LP873X
+	tristate "TI LP873X Power regulators"
+	depends on MFD_LP873X && OF
+	help
+	  This driver supports LP873X voltage regulator chips. LP873X
+	  provides two step-down converters and two general-purpose LDO
+	  voltage regulators. It supports software based voltage control
+	  for different voltage domains
+
 config REGULATOR_LP8755
 	tristate "TI LP8755 High Performance PMU driver"
 	depends on I2C
@@ -409,6 +418,7 @@ config REGULATOR_MAX8952
 config REGULATOR_MAX8973
 	tristate "Maxim MAX8973 voltage regulator "
 	depends on I2C
+	depends on THERMAL && THERMAL_OF
 	select REGMAP_I2C
 	help
 	  The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
@@ -548,6 +558,13 @@ config REGULATOR_PV88060
 	  Say y here to support the voltage regulators and convertors
 	  PV88060
 
+config REGULATOR_PV88080
+	tristate "Powerventure Semiconductor PV88080 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support the buck convertors on PV88080
+
 config REGULATOR_PV88090
 	tristate "Powerventure Semiconductor PV88090 regulator"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 61bfbb9d4..85a1d44a3 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -42,11 +42,12 @@ obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
 obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
+obj-$(CONFIG_REGULATOR_LP873X) += lp873x-regulator.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
 obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
 obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
-obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o
+obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
@@ -55,10 +56,10 @@ obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
 obj-$(CONFIG_REGULATOR_MAX8973) += max8973-regulator.o
-obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
+obj-$(CONFIG_REGULATOR_MAX8997) += max8997-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
 obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o
-obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
+obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
@@ -71,6 +72,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
 obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
+obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o
 obj-$(CONFIG_REGULATOR_PV88090) += pv88090-regulator.o
 obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
 obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 000d566e3..a1cd0d4f8 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -139,6 +139,74 @@ struct act8865 {
 	int off_mask;
 };
 
+static const struct regmap_range act8600_reg_ranges[] = {
+	regmap_reg_range(0x00, 0x01),
+	regmap_reg_range(0x10, 0x10),
+	regmap_reg_range(0x12, 0x12),
+	regmap_reg_range(0x20, 0x20),
+	regmap_reg_range(0x22, 0x22),
+	regmap_reg_range(0x30, 0x30),
+	regmap_reg_range(0x32, 0x32),
+	regmap_reg_range(0x40, 0x41),
+	regmap_reg_range(0x50, 0x51),
+	regmap_reg_range(0x60, 0x61),
+	regmap_reg_range(0x70, 0x71),
+	regmap_reg_range(0x80, 0x81),
+	regmap_reg_range(0x91, 0x91),
+	regmap_reg_range(0xA1, 0xA1),
+	regmap_reg_range(0xA8, 0xAA),
+	regmap_reg_range(0xB0, 0xB0),
+	regmap_reg_range(0xB2, 0xB2),
+	regmap_reg_range(0xC1, 0xC1),
+};
+
+static const struct regmap_range act8600_reg_ro_ranges[] = {
+	regmap_reg_range(0xAA, 0xAA),
+	regmap_reg_range(0xC1, 0xC1),
+};
+
+static const struct regmap_range act8600_reg_volatile_ranges[] = {
+	regmap_reg_range(0x00, 0x01),
+	regmap_reg_range(0x12, 0x12),
+	regmap_reg_range(0x22, 0x22),
+	regmap_reg_range(0x32, 0x32),
+	regmap_reg_range(0x41, 0x41),
+	regmap_reg_range(0x51, 0x51),
+	regmap_reg_range(0x61, 0x61),
+	regmap_reg_range(0x71, 0x71),
+	regmap_reg_range(0x81, 0x81),
+	regmap_reg_range(0xA8, 0xA8),
+	regmap_reg_range(0xAA, 0xAA),
+	regmap_reg_range(0xB0, 0xB0),
+	regmap_reg_range(0xC1, 0xC1),
+};
+
+static const struct regmap_access_table act8600_write_ranges_table = {
+	.yes_ranges	= act8600_reg_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(act8600_reg_ranges),
+	.no_ranges	= act8600_reg_ro_ranges,
+	.n_no_ranges	= ARRAY_SIZE(act8600_reg_ro_ranges),
+};
+
+static const struct regmap_access_table act8600_read_ranges_table = {
+	.yes_ranges	= act8600_reg_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(act8600_reg_ranges),
+};
+
+static const struct regmap_access_table act8600_volatile_ranges_table = {
+	.yes_ranges	= act8600_reg_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(act8600_reg_volatile_ranges),
+};
+
+static const struct regmap_config act8600_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xFF,
+	.wr_table = &act8600_write_ranges_table,
+	.rd_table = &act8600_read_ranges_table,
+	.volatile_table = &act8600_volatile_ranges_table,
+};
+
 static const struct regmap_config act8865_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -319,7 +387,6 @@ static struct of_regulator_match act8600_matches[] = {
 };
 
 static int act8865_pdata_from_dt(struct device *dev,
-				 struct device_node **of_node,
 				 struct act8865_platform_data *pdata,
 				 unsigned long type)
 {
@@ -370,7 +437,7 @@ static int act8865_pdata_from_dt(struct device *dev,
 		regulator->id = i;
 		regulator->name = matches[i].name;
 		regulator->init_data = matches[i].init_data;
-		of_node[i] = matches[i].of_node;
+		regulator->of_node = matches[i].of_node;
 		regulator++;
 	}
 
@@ -378,7 +445,6 @@ static int act8865_pdata_from_dt(struct device *dev,
 }
 #else
 static inline int act8865_pdata_from_dt(struct device *dev,
-					struct device_node **of_node,
 					struct act8865_platform_data *pdata,
 					unsigned long type)
 {
@@ -386,8 +452,8 @@ static inline int act8865_pdata_from_dt(struct device *dev,
 }
 #endif
 
-static struct regulator_init_data
-*act8865_get_init_data(int id, struct act8865_platform_data *pdata)
+static struct act8865_regulator_data *act8865_get_regulator_data(
+		int id, struct act8865_platform_data *pdata)
 {
 	int i;
 
@@ -396,7 +462,7 @@ static struct regulator_init_data
 
 	for (i = 0; i < pdata->num_regulators; i++) {
 		if (pdata->regulators[i].id == id)
-			return pdata->regulators[i].init_data;
+			return &pdata->regulators[i];
 	}
 
 	return NULL;
@@ -418,9 +484,9 @@ static int act8865_pmic_probe(struct i2c_client *client,
 	const struct regulator_desc *regulators;
 	struct act8865_platform_data pdata_of, *pdata;
 	struct device *dev = &client->dev;
-	struct device_node **of_node;
 	int i, ret, num_regulators;
 	struct act8865 *act8865;
+	const struct regmap_config *regmap_config;
 	unsigned long type;
 	int off_reg, off_mask;
 	int voltage_select = 0;
@@ -447,12 +513,14 @@ static int act8865_pmic_probe(struct i2c_client *client,
 	case ACT8600:
 		regulators = act8600_regulators;
 		num_regulators = ARRAY_SIZE(act8600_regulators);
+		regmap_config = &act8600_regmap_config;
 		off_reg = -1;
 		off_mask = -1;
 		break;
 	case ACT8846:
 		regulators = act8846_regulators;
 		num_regulators = ARRAY_SIZE(act8846_regulators);
+		regmap_config = &act8865_regmap_config;
 		off_reg = ACT8846_GLB_OFF_CTRL;
 		off_mask = ACT8846_OFF_SYSMASK;
 		break;
@@ -464,6 +532,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
 			regulators = act8865_regulators;
 			num_regulators = ARRAY_SIZE(act8865_regulators);
 		}
+		regmap_config = &act8865_regmap_config;
 		off_reg = ACT8865_SYS_CTRL;
 		off_mask = ACT8865_MSTROFF;
 		break;
@@ -472,34 +541,22 @@ static int act8865_pmic_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	of_node = devm_kzalloc(dev, sizeof(struct device_node *) *
-			       num_regulators, GFP_KERNEL);
-	if (!of_node)
-		return -ENOMEM;
-
 	if (dev->of_node && !pdata) {
-		ret = act8865_pdata_from_dt(dev, of_node, &pdata_of, type);
+		ret = act8865_pdata_from_dt(dev, &pdata_of, type);
 		if (ret < 0)
 			return ret;
 
 		pdata = &pdata_of;
 	}
 
-	if (pdata->num_regulators > num_regulators) {
-		dev_err(dev, "too many regulators: %d\n",
-			pdata->num_regulators);
-		return -EINVAL;
-	}
-
 	act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL);
 	if (!act8865)
 		return -ENOMEM;
 
-	act8865->regmap = devm_regmap_init_i2c(client, &act8865_regmap_config);
+	act8865->regmap = devm_regmap_init_i2c(client, regmap_config);
 	if (IS_ERR(act8865->regmap)) {
 		ret = PTR_ERR(act8865->regmap);
-		dev_err(&client->dev, "Failed to allocate register map: %d\n",
-			ret);
+		dev_err(dev, "Failed to allocate register map: %d\n", ret);
 		return ret;
 	}
 
@@ -518,15 +575,20 @@ static int act8865_pmic_probe(struct i2c_client *client,
 	for (i = 0; i < num_regulators; i++) {
 		const struct regulator_desc *desc = &regulators[i];
 		struct regulator_config config = { };
+		struct act8865_regulator_data *rdata;
 		struct regulator_dev *rdev;
 
 		config.dev = dev;
-		config.init_data = act8865_get_init_data(desc->id, pdata);
-		config.of_node = of_node[i];
 		config.driver_data = act8865;
 		config.regmap = act8865->regmap;
 
-		rdev = devm_regulator_register(&client->dev, desc, &config);
+		rdata = act8865_get_regulator_data(desc->id, pdata);
+		if (rdata) {
+			config.init_data = rdata->init_data;
+			config.of_node = rdata->of_node;
+		}
+
+		rdev = devm_regulator_register(dev, desc, &config);
 		if (IS_ERR(rdev)) {
 			dev_err(dev, "failed to register %s\n", desc->name);
 			return PTR_ERR(rdev);
@@ -534,7 +596,6 @@ static int act8865_pmic_probe(struct i2c_client *client,
 	}
 
 	i2c_set_clientdata(client, act8865);
-	devm_kfree(dev, of_node);
 
 	return 0;
 }
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 63cd5e68c..3a6d0290c 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 		if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
 			sreg->sel = 22;
 
-		if (!sreg->sel) {
+		if (!sreg->bypass && !sreg->sel) {
 			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 			return -EINVAL;
 		}
diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c
index 8b046eec6..66337e127 100644
--- a/drivers/regulator/as3722-regulator.c
+++ b/drivers/regulator/as3722-regulator.c
@@ -372,7 +372,7 @@ static int as3722_ldo_set_current_limit(struct regulator_dev *rdev,
 			AS3722_LDO_ILIMIT_MASK, reg);
 }
 
-static struct regulator_ops as3722_ldo0_ops = {
+static const struct regulator_ops as3722_ldo0_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -383,7 +383,7 @@ static struct regulator_ops as3722_ldo0_ops = {
 	.set_current_limit = as3722_ldo_set_current_limit,
 };
 
-static struct regulator_ops as3722_ldo0_extcntrl_ops = {
+static const struct regulator_ops as3722_ldo0_extcntrl_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -415,7 +415,7 @@ static int as3722_ldo3_get_current_limit(struct regulator_dev *rdev)
 	return 150000;
 }
 
-static struct regulator_ops as3722_ldo3_ops = {
+static const struct regulator_ops as3722_ldo3_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -425,20 +425,45 @@ static struct regulator_ops as3722_ldo3_ops = {
 	.get_current_limit = as3722_ldo3_get_current_limit,
 };
 
-static struct regulator_ops as3722_ldo3_extcntrl_ops = {
+static const struct regulator_ops as3722_ldo3_extcntrl_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_current_limit = as3722_ldo3_get_current_limit,
 };
 
+static const struct regulator_ops as3722_ldo6_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.get_current_limit = as3722_ldo_get_current_limit,
+	.set_current_limit = as3722_ldo_set_current_limit,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
+};
+
+static const struct regulator_ops as3722_ldo6_extcntrl_ops = {
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.get_current_limit = as3722_ldo_get_current_limit,
+	.set_current_limit = as3722_ldo_set_current_limit,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
+};
+
 static const struct regulator_linear_range as3722_ldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0),
 	REGULATOR_LINEAR_RANGE(825000, 0x01, 0x24, 25000),
 	REGULATOR_LINEAR_RANGE(1725000, 0x40, 0x7F, 25000),
 };
 
-static struct regulator_ops as3722_ldo_ops = {
+static const struct regulator_ops as3722_ldo_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -450,7 +475,7 @@ static struct regulator_ops as3722_ldo_ops = {
 	.set_current_limit = as3722_ldo_set_current_limit,
 };
 
-static struct regulator_ops as3722_ldo_extcntrl_ops = {
+static const struct regulator_ops as3722_ldo_extcntrl_ops = {
 	.map_voltage = regulator_map_voltage_linear_range,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -616,7 +641,7 @@ static const struct regulator_linear_range as3722_sd2345_ranges[] = {
 	REGULATOR_LINEAR_RANGE(2650000, 0x71, 0x7F, 50000),
 };
 
-static struct regulator_ops as3722_sd016_ops = {
+static const struct regulator_ops as3722_sd016_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -630,7 +655,7 @@ static struct regulator_ops as3722_sd016_ops = {
 	.set_mode = as3722_sd_set_mode,
 };
 
-static struct regulator_ops as3722_sd016_extcntrl_ops = {
+static const struct regulator_ops as3722_sd016_extcntrl_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -641,7 +666,7 @@ static struct regulator_ops as3722_sd016_extcntrl_ops = {
 	.set_mode = as3722_sd_set_mode,
 };
 
-static struct regulator_ops as3722_sd2345_ops = {
+static const struct regulator_ops as3722_sd2345_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -653,7 +678,7 @@ static struct regulator_ops as3722_sd2345_ops = {
 	.set_mode = as3722_sd_set_mode,
 };
 
-static struct regulator_ops as3722_sd2345_extcntrl_ops = {
+static const struct regulator_ops as3722_sd2345_extcntrl_ops = {
 	.list_voltage = regulator_list_voltage_linear_range,
 	.map_voltage = regulator_map_voltage_linear_range,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -760,7 +785,7 @@ static int as3722_regulator_probe(struct platform_device *pdev)
 	struct as3722_regulator_config_data *reg_config;
 	struct regulator_dev *rdev;
 	struct regulator_config config = { };
-	struct regulator_ops *ops;
+	const struct regulator_ops *ops;
 	int id;
 	int ret;
 
@@ -829,6 +854,24 @@ static int as3722_regulator_probe(struct platform_device *pdev)
 				}
 			}
 			break;
+		case AS3722_REGULATOR_ID_LDO6:
+			if (reg_config->ext_control)
+				ops = &as3722_ldo6_extcntrl_ops;
+			else
+				ops = &as3722_ldo6_ops;
+			as3722_regs->desc[id].enable_time = 500;
+			as3722_regs->desc[id].bypass_reg =
+						AS3722_LDO6_VOLTAGE_REG;
+			as3722_regs->desc[id].bypass_mask =
+						AS3722_LDO_VSEL_MASK;
+			as3722_regs->desc[id].bypass_val_on =
+						AS3722_LDO6_VSEL_BYPASS;
+			as3722_regs->desc[id].bypass_val_off =
+						AS3722_LDO6_VSEL_BYPASS;
+			as3722_regs->desc[id].linear_ranges = as3722_ldo_ranges;
+			as3722_regs->desc[id].n_linear_ranges =
+						ARRAY_SIZE(as3722_ldo_ranges);
+			break;
 		case AS3722_REGULATOR_ID_SD0:
 		case AS3722_REGULATOR_ID_SD1:
 		case AS3722_REGULATOR_ID_SD6:
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index fd0e4e37f..ec8184d53 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -132,6 +132,19 @@ static bool have_full_constraints(void)
 	return has_full_constraints || of_have_populated_dt();
 }
 
+static bool regulator_ops_is_valid(struct regulator_dev *rdev, int ops)
+{
+	if (!rdev->constraints) {
+		rdev_err(rdev, "no constraints\n");
+		return false;
+	}
+
+	if (rdev->constraints->valid_ops_mask & ops)
+		return true;
+
+	return false;
+}
+
 static inline struct regulator_dev *rdev_get_supply(struct regulator_dev *rdev)
 {
 	if (rdev && rdev->supply)
@@ -198,28 +211,13 @@ static struct device_node *of_get_regulator(struct device *dev, const char *supp
 	return regnode;
 }
 
-static int _regulator_can_change_status(struct regulator_dev *rdev)
-{
-	if (!rdev->constraints)
-		return 0;
-
-	if (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_STATUS)
-		return 1;
-	else
-		return 0;
-}
-
 /* Platform voltage constraint check */
 static int regulator_check_voltage(struct regulator_dev *rdev,
 				   int *min_uV, int *max_uV)
 {
 	BUG_ON(*min_uV > *max_uV);
 
-	if (!rdev->constraints) {
-		rdev_err(rdev, "no constraints\n");
-		return -ENODEV;
-	}
-	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+	if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
 		rdev_err(rdev, "voltage operation not allowed\n");
 		return -EPERM;
 	}
@@ -275,11 +273,7 @@ static int regulator_check_current_limit(struct regulator_dev *rdev,
 {
 	BUG_ON(*min_uA > *max_uA);
 
-	if (!rdev->constraints) {
-		rdev_err(rdev, "no constraints\n");
-		return -ENODEV;
-	}
-	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
+	if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_CURRENT)) {
 		rdev_err(rdev, "current operation not allowed\n");
 		return -EPERM;
 	}
@@ -312,11 +306,7 @@ static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode)
 		return -EINVAL;
 	}
 
-	if (!rdev->constraints) {
-		rdev_err(rdev, "no constraints\n");
-		return -ENODEV;
-	}
-	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
+	if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_MODE)) {
 		rdev_err(rdev, "mode operation not allowed\n");
 		return -EPERM;
 	}
@@ -333,20 +323,6 @@ static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode)
 	return -EINVAL;
 }
 
-/* dynamic regulator mode switching constraint check */
-static int regulator_check_drms(struct regulator_dev *rdev)
-{
-	if (!rdev->constraints) {
-		rdev_err(rdev, "no constraints\n");
-		return -ENODEV;
-	}
-	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
-		rdev_dbg(rdev, "drms operation not allowed\n");
-		return -EPERM;
-	}
-	return 0;
-}
-
 static ssize_t regulator_uV_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
@@ -692,8 +668,7 @@ static int drms_uA_update(struct regulator_dev *rdev)
 	 * first check to see if we can set modes at all, otherwise just
 	 * tell the consumer everything is OK.
 	 */
-	err = regulator_check_drms(rdev);
-	if (err < 0)
+	if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS))
 		return 0;
 
 	if (!rdev->desc->ops->get_optimum_mode &&
@@ -808,8 +783,6 @@ static int suspend_set_state(struct regulator_dev *rdev,
 /* locks held by caller */
 static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
 {
-	lockdep_assert_held_once(&rdev->mutex);
-
 	if (!rdev->constraints)
 		return -EINVAL;
 
@@ -893,7 +866,7 @@ static void print_constraints(struct regulator_dev *rdev)
 	rdev_dbg(rdev, "%s\n", buf);
 
 	if ((constraints->min_uV != constraints->max_uV) &&
-	    !(constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE))
+	    !regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE))
 		rdev_warn(rdev,
 			  "Voltage range but no REGULATOR_CHANGE_VOLTAGE\n");
 }
@@ -906,7 +879,8 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
 
 	/* do we need to apply the constraint voltage */
 	if (rdev->constraints->apply_uV &&
-	    rdev->constraints->min_uV == rdev->constraints->max_uV) {
+	    rdev->constraints->min_uV && rdev->constraints->max_uV) {
+		int target_min, target_max;
 		int current_uV = _regulator_get_voltage(rdev);
 		if (current_uV < 0) {
 			rdev_err(rdev,
@@ -914,15 +888,34 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
 				 current_uV);
 			return current_uV;
 		}
-		if (current_uV < rdev->constraints->min_uV ||
-		    current_uV > rdev->constraints->max_uV) {
+
+		/*
+		 * If we're below the minimum voltage move up to the
+		 * minimum voltage, if we're above the maximum voltage
+		 * then move down to the maximum.
+		 */
+		target_min = current_uV;
+		target_max = current_uV;
+
+		if (current_uV < rdev->constraints->min_uV) {
+			target_min = rdev->constraints->min_uV;
+			target_max = rdev->constraints->min_uV;
+		}
+
+		if (current_uV > rdev->constraints->max_uV) {
+			target_min = rdev->constraints->max_uV;
+			target_max = rdev->constraints->max_uV;
+		}
+
+		if (target_min != current_uV || target_max != current_uV) {
+			rdev_info(rdev, "Bringing %duV into %d-%duV\n",
+				  current_uV, target_min, target_max);
 			ret = _regulator_do_set_voltage(
-				rdev, rdev->constraints->min_uV,
-				rdev->constraints->max_uV);
+				rdev, target_min, target_max);
 			if (ret < 0) {
 				rdev_err(rdev,
-					"failed to apply %duV constraint(%d)\n",
-					rdev->constraints->min_uV, ret);
+					"failed to apply %d-%duV constraint(%d)\n",
+					target_min, target_max, ret);
 				return ret;
 			}
 		}
@@ -1150,17 +1143,6 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		}
 	}
 
-	if (rdev->constraints->active_discharge && ops->set_active_discharge) {
-		bool ad_state = (rdev->constraints->active_discharge ==
-			      REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false;
-
-		ret = ops->set_active_discharge(rdev, ad_state);
-		if (ret < 0) {
-			rdev_err(rdev, "failed to set active discharge\n");
-			return ret;
-		}
-	}
-
 	print_constraints(rdev);
 	return 0;
 }
@@ -1272,6 +1254,55 @@ static void unset_regulator_supplies(struct regulator_dev *rdev)
 	}
 }
 
+#ifdef CONFIG_DEBUG_FS
+static ssize_t constraint_flags_read_file(struct file *file,
+					  char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	const struct regulator *regulator = file->private_data;
+	const struct regulation_constraints *c = regulator->rdev->constraints;
+	char *buf;
+	ssize_t ret;
+
+	if (!c)
+		return 0;
+
+	buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = snprintf(buf, PAGE_SIZE,
+			"always_on: %u\n"
+			"boot_on: %u\n"
+			"apply_uV: %u\n"
+			"ramp_disable: %u\n"
+			"soft_start: %u\n"
+			"pull_down: %u\n"
+			"over_current_protection: %u\n",
+			c->always_on,
+			c->boot_on,
+			c->apply_uV,
+			c->ramp_disable,
+			c->soft_start,
+			c->pull_down,
+			c->over_current_protection);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+	kfree(buf);
+
+	return ret;
+}
+
+#endif
+
+static const struct file_operations constraint_flags_fops = {
+#ifdef CONFIG_DEBUG_FS
+	.open = simple_open,
+	.read = constraint_flags_read_file,
+	.llseek = default_llseek,
+#endif
+};
+
 #define REG_STR_SIZE	64
 
 static struct regulator *create_regulator(struct regulator_dev *rdev,
@@ -1327,6 +1358,9 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 				   &regulator->min_uV);
 		debugfs_create_u32("max_uV", 0444, regulator->debugfs,
 				   &regulator->max_uV);
+		debugfs_create_file("constraint_flags", 0444,
+				    regulator->debugfs, regulator,
+				    &constraint_flags_fops);
 	}
 
 	/*
@@ -1334,7 +1368,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 	 * it is then we don't need to do nearly so much work for
 	 * enable/disable calls.
 	 */
-	if (!_regulator_can_change_status(rdev) &&
+	if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS) &&
 	    _regulator_is_enabled(rdev))
 		regulator->always_on = true;
 
@@ -1532,10 +1566,11 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 	}
 
 	/* Cascade always-on state to supply */
-	if (_regulator_is_enabled(rdev) && rdev->supply) {
+	if (_regulator_is_enabled(rdev)) {
 		ret = regulator_enable(rdev->supply);
 		if (ret < 0) {
 			_regulator_put(rdev->supply);
+			rdev->supply = NULL;
 			return ret;
 		}
 	}
@@ -2111,15 +2146,15 @@ static int _regulator_enable(struct regulator_dev *rdev)
 	lockdep_assert_held_once(&rdev->mutex);
 
 	/* check voltage and requested load before enabling */
-	if (rdev->constraints &&
-	    (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS))
+	if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS))
 		drms_uA_update(rdev);
 
 	if (rdev->use_count == 0) {
 		/* The regulator may on if it's not switchable or left on */
 		ret = _regulator_is_enabled(rdev);
 		if (ret == -EINVAL || ret == 0) {
-			if (!_regulator_can_change_status(rdev))
+			if (!regulator_ops_is_valid(rdev,
+					REGULATOR_CHANGE_STATUS))
 				return -EPERM;
 
 			ret = _regulator_do_enable(rdev);
@@ -2221,7 +2256,7 @@ static int _regulator_disable(struct regulator_dev *rdev)
 	    (rdev->constraints && !rdev->constraints->always_on)) {
 
 		/* we are last user */
-		if (_regulator_can_change_status(rdev)) {
+		if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS)) {
 			ret = _notifier_call_chain(rdev,
 						   REGULATOR_EVENT_PRE_DISABLE,
 						   NULL);
@@ -2242,10 +2277,7 @@ static int _regulator_disable(struct regulator_dev *rdev)
 
 		rdev->use_count = 0;
 	} else if (rdev->use_count > 1) {
-
-		if (rdev->constraints &&
-			(rdev->constraints->valid_ops_mask &
-			REGULATOR_CHANGE_DRMS))
+		if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS))
 			drms_uA_update(rdev);
 
 		rdev->use_count--;
@@ -2489,8 +2521,7 @@ int regulator_can_change_voltage(struct regulator *regulator)
 {
 	struct regulator_dev	*rdev = regulator->rdev;
 
-	if (rdev->constraints &&
-	    (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+	if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
 		if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1)
 			return 1;
 
@@ -2644,7 +2675,7 @@ int regulator_is_supported_voltage(struct regulator *regulator,
 	int i, voltages, ret;
 
 	/* If we can't change voltage check the current voltage */
-	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+	if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
 		ret = regulator_get_voltage(regulator);
 		if (ret >= 0)
 			return min_uV <= ret && ret <= max_uV;
@@ -2850,7 +2881,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 	 * return successfully even though the regulator does not support
 	 * changing the voltage.
 	 */
-	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+	if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
 		current_uV = _regulator_get_voltage(rdev);
 		if (min_uV <= current_uV && current_uV <= max_uV) {
 			regulator->min_uV = min_uV;
@@ -3109,6 +3140,23 @@ EXPORT_SYMBOL_GPL(regulator_sync_voltage);
 static int _regulator_get_voltage(struct regulator_dev *rdev)
 {
 	int sel, ret;
+	bool bypassed;
+
+	if (rdev->desc->ops->get_bypass) {
+		ret = rdev->desc->ops->get_bypass(rdev, &bypassed);
+		if (ret < 0)
+			return ret;
+		if (bypassed) {
+			/* if bypassed the regulator must have a supply */
+			if (!rdev->supply) {
+				rdev_err(rdev,
+					 "bypassed regulator has no supply!\n");
+				return -EPROBE_DEFER;
+			}
+
+			return _regulator_get_voltage(rdev->supply->rdev);
+		}
+	}
 
 	if (rdev->desc->ops->get_voltage_sel) {
 		sel = rdev->desc->ops->get_voltage_sel(rdev);
@@ -3365,8 +3413,7 @@ int regulator_allow_bypass(struct regulator *regulator, bool enable)
 	if (!rdev->desc->ops->set_bypass)
 		return 0;
 
-	if (rdev->constraints &&
-	    !(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_BYPASS))
+	if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_BYPASS))
 		return 0;
 
 	mutex_lock(&rdev->mutex);
@@ -3842,7 +3889,12 @@ static void rdev_init_debugfs(struct regulator_dev *rdev)
 
 static int regulator_register_resolve_supply(struct device *dev, void *data)
 {
-	return regulator_resolve_supply(dev_to_rdev(dev));
+	struct regulator_dev *rdev = dev_to_rdev(dev);
+
+	if (regulator_resolve_supply(rdev))
+		rdev_dbg(rdev, "unable to resolve supply\n");
+
+	return 0;
 }
 
 /**
@@ -3916,8 +3968,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
 		rdev->dev.of_node = of_node_get(config->of_node);
 	}
 
-	mutex_lock(&regulator_list_mutex);
-
 	mutex_init(&rdev->mutex);
 	rdev->reg_data = config->driver_data;
 	rdev->owner = regulator_desc->owner;
@@ -3942,7 +3992,9 @@ regulator_register(const struct regulator_desc *regulator_desc,
 
 	if ((config->ena_gpio || config->ena_gpio_initialized) &&
 	    gpio_is_valid(config->ena_gpio)) {
+		mutex_lock(&regulator_list_mutex);
 		ret = regulator_ena_gpio_request(rdev, config);
+		mutex_unlock(&regulator_list_mutex);
 		if (ret != 0) {
 			rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
 				 config->ena_gpio, ret);
@@ -3955,43 +4007,53 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	rdev->dev.parent = dev;
 	dev_set_name(&rdev->dev, "regulator.%lu",
 		    (unsigned long) atomic_inc_return(&regulator_no));
-	ret = device_register(&rdev->dev);
-	if (ret != 0) {
-		put_device(&rdev->dev);
-		goto wash;
-	}
-
-	dev_set_drvdata(&rdev->dev, rdev);
 
 	/* set regulator constraints */
 	if (init_data)
 		constraints = &init_data->constraints;
 
-	ret = set_machine_constraints(rdev, constraints);
-	if (ret < 0)
-		goto scrub;
-
 	if (init_data && init_data->supply_regulator)
 		rdev->supply_name = init_data->supply_regulator;
 	else if (regulator_desc->supply_name)
 		rdev->supply_name = regulator_desc->supply_name;
 
+	/*
+	 * Attempt to resolve the regulator supply, if specified,
+	 * but don't return an error if we fail because we will try
+	 * to resolve it again later as more regulators are added.
+	 */
+	if (regulator_resolve_supply(rdev))
+		rdev_dbg(rdev, "unable to resolve supply\n");
+
+	ret = set_machine_constraints(rdev, constraints);
+	if (ret < 0)
+		goto wash;
+
 	/* add consumers devices */
 	if (init_data) {
+		mutex_lock(&regulator_list_mutex);
 		for (i = 0; i < init_data->num_consumer_supplies; i++) {
 			ret = set_consumer_device_supply(rdev,
 				init_data->consumer_supplies[i].dev_name,
 				init_data->consumer_supplies[i].supply);
 			if (ret < 0) {
+				mutex_unlock(&regulator_list_mutex);
 				dev_err(dev, "Failed to set supply %s\n",
 					init_data->consumer_supplies[i].supply);
 				goto unset_supplies;
 			}
 		}
+		mutex_unlock(&regulator_list_mutex);
 	}
 
+	ret = device_register(&rdev->dev);
+	if (ret != 0) {
+		put_device(&rdev->dev);
+		goto unset_supplies;
+	}
+
+	dev_set_drvdata(&rdev->dev, rdev);
 	rdev_init_debugfs(rdev);
-	mutex_unlock(&regulator_list_mutex);
 
 	/* try to resolve regulators supply since a new one was registered */
 	class_for_each_device(&regulator_class, NULL, NULL,
@@ -4000,20 +4062,16 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	return rdev;
 
 unset_supplies:
+	mutex_lock(&regulator_list_mutex);
 	unset_regulator_supplies(rdev);
-
-scrub:
-	regulator_ena_gpio_free(rdev);
-	device_unregister(&rdev->dev);
-	/* device core frees rdev */
-	goto out;
-
+	mutex_unlock(&regulator_list_mutex);
 wash:
+	kfree(rdev->constraints);
+	mutex_lock(&regulator_list_mutex);
 	regulator_ena_gpio_free(rdev);
+	mutex_unlock(&regulator_list_mutex);
 clean:
 	kfree(rdev);
-out:
-	mutex_unlock(&regulator_list_mutex);
 	kfree(config);
 	return ERR_PTR(ret);
 }
@@ -4041,8 +4099,8 @@ void regulator_unregister(struct regulator_dev *rdev)
 	WARN_ON(rdev->open_count);
 	unset_regulator_supplies(rdev);
 	list_del(&rdev->list);
-	mutex_unlock(&regulator_list_mutex);
 	regulator_ena_gpio_free(rdev);
+	mutex_unlock(&regulator_list_mutex);
 	device_unregister(&rdev->dev);
 }
 EXPORT_SYMBOL_GPL(regulator_unregister);
@@ -4395,7 +4453,7 @@ static int __init regulator_late_cleanup(struct device *dev, void *data)
 	if (c && c->always_on)
 		return 0;
 
-	if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
+	if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS))
 		return 0;
 
 	mutex_lock(&rdev->mutex);
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 2cb5cc311..d7da81a87 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -65,6 +65,13 @@ enum {
 	FAN53555_CHIP_ID_03,
 	FAN53555_CHIP_ID_04,
 	FAN53555_CHIP_ID_05,
+	FAN53555_CHIP_ID_08 = 8,
+};
+
+/* IC mask revision */
+enum {
+	FAN53555_CHIP_REV_00 = 0x3,
+	FAN53555_CHIP_REV_13 = 0xf,
 };
 
 enum {
@@ -217,9 +224,26 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
 	/* Init voltage range and step */
 	switch (di->chip_id) {
 	case FAN53555_CHIP_ID_00:
+		switch (di->chip_rev) {
+		case FAN53555_CHIP_REV_00:
+			di->vsel_min = 600000;
+			di->vsel_step = 10000;
+			break;
+		case FAN53555_CHIP_REV_13:
+			di->vsel_min = 800000;
+			di->vsel_step = 10000;
+			break;
+		default:
+			dev_err(di->dev,
+				"Chip ID %d with rev %d not supported!\n",
+				di->chip_id, di->chip_rev);
+			return -EINVAL;
+		}
+		break;
 	case FAN53555_CHIP_ID_01:
 	case FAN53555_CHIP_ID_03:
 	case FAN53555_CHIP_ID_05:
+	case FAN53555_CHIP_ID_08:
 		di->vsel_min = 600000;
 		di->vsel_step = 10000;
 		break;
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index b1e32e748..bcf38fd51 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -460,7 +460,7 @@ int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable)
 	if (ret != 0)
 		return ret;
 
-	*enable = val & rdev->desc->bypass_mask;
+	*enable = (val & rdev->desc->bypass_mask) == rdev->desc->bypass_val_on;
 
 	return 0;
 }
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 15c25c622..204b5c527 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -365,8 +365,8 @@ static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val)
 	mutex_lock(&lp3971->io_lock);
 
 	ret = lp3971_i2c_read(lp3971->i2c, reg, 1, &tmp);
-	tmp = (tmp & ~mask) | val;
 	if (ret == 0) {
+		tmp = (tmp & ~mask) | val;
 		ret = lp3971_i2c_write(lp3971->i2c, reg, 1, &tmp);
 		dev_dbg(lp3971->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
 			(unsigned)val&0xff);
diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c
index 3a7e96e2c..ff0c275f9 100644
--- a/drivers/regulator/lp3972.c
+++ b/drivers/regulator/lp3972.c
@@ -211,8 +211,8 @@ static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val)
 	mutex_lock(&lp3972->io_lock);
 
 	ret = lp3972_i2c_read(lp3972->i2c, reg, 1, &tmp);
-	tmp = (tmp & ~mask) | val;
 	if (ret == 0) {
+		tmp = (tmp & ~mask) | val;
 		ret = lp3972_i2c_write(lp3972->i2c, reg, 1, &tmp);
 		dev_dbg(lp3972->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
 			(unsigned)val & 0xff);
diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c
new file mode 100644
index 000000000..b4ffd113b
--- /dev/null
+++ b/drivers/regulator/lp873x-regulator.c
@@ -0,0 +1,241 @@
+/*
+ * Regulator driver for LP873X PMIC
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/lp873x.h>
+
+#define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
+			 _delay, _lr, _nlr, _cr)			\
+	[_id] = {							\
+		.desc = {						\
+			.name			= _name,		\
+			.id			= _id,			\
+			.of_match		= of_match_ptr(_of),	\
+			.regulators_node	= of_match_ptr("regulators"),\
+			.ops			= &_ops,		\
+			.n_voltages		= _n,			\
+			.type			= REGULATOR_VOLTAGE,	\
+			.owner			= THIS_MODULE,		\
+			.vsel_reg		= _vr,			\
+			.vsel_mask		= _vm,			\
+			.enable_reg		= _er,			\
+			.enable_mask		= _em,			\
+			.ramp_delay		= _delay,		\
+			.linear_ranges		= _lr,			\
+			.n_linear_ranges	= _nlr,			\
+		},							\
+		.ctrl2_reg = _cr,					\
+	}
+
+struct lp873x_regulator {
+	struct regulator_desc desc;
+	unsigned int ctrl2_reg;
+};
+
+static const struct lp873x_regulator regulators[];
+
+static const struct regulator_linear_range buck0_buck1_ranges[] = {
+	REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0),
+	REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000),
+	REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
+	REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
+};
+
+static const struct regulator_linear_range ldo0_ldo1_ranges[] = {
+	REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000),
+};
+
+static unsigned int lp873x_buck_ramp_delay[] = {
+	30000, 15000, 10000, 7500, 3800, 1900, 940, 470
+};
+
+/* LP873X BUCK current limit */
+static const unsigned int lp873x_buck_uA[] = {
+	1500000, 2000000, 2500000, 3000000, 3500000, 4000000,
+};
+
+static int lp873x_buck_set_ramp_delay(struct regulator_dev *rdev,
+				      int ramp_delay)
+{
+	int id = rdev_get_id(rdev);
+	struct lp873x *lp873 = rdev_get_drvdata(rdev);
+	unsigned int reg;
+	int ret;
+
+	if (ramp_delay <= 470)
+		reg = 7;
+	else if (ramp_delay <= 940)
+		reg = 6;
+	else if (ramp_delay <= 1900)
+		reg = 5;
+	else if (ramp_delay <= 3800)
+		reg = 4;
+	else if (ramp_delay <= 7500)
+		reg = 3;
+	else if (ramp_delay <= 10000)
+		reg = 2;
+	else if (ramp_delay <= 15000)
+		reg = 1;
+	else
+		reg = 0;
+
+	ret = regmap_update_bits(lp873->regmap, regulators[id].ctrl2_reg,
+				 LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE,
+				 reg << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE));
+	if (ret) {
+		dev_err(lp873->dev, "SLEW RATE write failed: %d\n", ret);
+		return ret;
+	}
+
+	rdev->constraints->ramp_delay = lp873x_buck_ramp_delay[reg];
+
+	return 0;
+}
+
+static int lp873x_buck_set_current_limit(struct regulator_dev *rdev,
+					 int min_uA, int max_uA)
+{
+	int id = rdev_get_id(rdev);
+	struct lp873x *lp873 = rdev_get_drvdata(rdev);
+	int i;
+
+	for (i = ARRAY_SIZE(lp873x_buck_uA) - 1; i >= 0; i--) {
+		if (lp873x_buck_uA[i] >= min_uA &&
+		    lp873x_buck_uA[i] <= max_uA)
+			return regmap_update_bits(lp873->regmap,
+						  regulators[id].ctrl2_reg,
+						  LP873X_BUCK0_CTRL_2_BUCK0_ILIM,
+						  i << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM));
+	}
+
+	return -EINVAL;
+}
+
+static int lp873x_buck_get_current_limit(struct regulator_dev *rdev)
+{
+	int id = rdev_get_id(rdev);
+	struct lp873x *lp873 = rdev_get_drvdata(rdev);
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(lp873->regmap, regulators[id].ctrl2_reg, &val);
+	if (ret)
+		return ret;
+
+	val = (val & LP873X_BUCK0_CTRL_2_BUCK0_ILIM) >>
+	       __ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM);
+
+	return (val < ARRAY_SIZE(lp873x_buck_uA)) ?
+			lp873x_buck_uA[val] : -EINVAL;
+}
+
+/* Operations permitted on BUCK0, BUCK1 */
+static struct regulator_ops lp873x_buck01_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_ramp_delay		= lp873x_buck_set_ramp_delay,
+	.set_current_limit	= lp873x_buck_set_current_limit,
+	.get_current_limit	= lp873x_buck_get_current_limit,
+};
+
+/* Operations permitted on LDO0 and LDO1 */
+static struct regulator_ops lp873x_ldo01_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+};
+
+static const struct lp873x_regulator regulators[] = {
+	LP873X_REGULATOR("BUCK0", LP873X_BUCK_0, "buck0", lp873x_buck01_ops,
+			 256, LP873X_REG_BUCK0_VOUT,
+			 LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1,
+			 LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000,
+			 buck0_buck1_ranges, 4, LP873X_REG_BUCK0_CTRL_2),
+	LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops,
+			 256, LP873X_REG_BUCK1_VOUT,
+			 LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1,
+			 LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000,
+			 buck0_buck1_ranges, 4, LP873X_REG_BUCK1_CTRL_2),
+	LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26,
+			 LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET,
+			 LP873X_REG_LDO0_CTRL,
+			 LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 1,
+			 0xFF),
+	LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26,
+			 LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET,
+			 LP873X_REG_LDO1_CTRL,
+			 LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 1,
+			 0xFF),
+};
+
+static int lp873x_regulator_probe(struct platform_device *pdev)
+{
+	struct lp873x *lp873 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	int i;
+
+	platform_set_drvdata(pdev, lp873);
+
+	config.dev = &pdev->dev;
+	config.dev->of_node = lp873->dev->of_node;
+	config.driver_data = lp873;
+	config.regmap = lp873->regmap;
+
+	for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+		rdev = devm_regulator_register(&pdev->dev, &regulators[i].desc,
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(lp873->dev, "failed to register %s regulator\n",
+				pdev->name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id lp873x_regulator_id_table[] = {
+	{ "lp873x-regulator", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, lp873x_regulator_id_table);
+
+static struct platform_driver lp873x_regulator_driver = {
+	.driver = {
+		.name = "lp873x-pmic",
+	},
+	.probe = lp873x_regulator_probe,
+	.id_table = lp873x_regulator_id_table,
+};
+module_platform_driver(lp873x_regulator_driver);
+
+MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
+MODULE_DESCRIPTION("LP873X voltage regulator driver");
+MODULE_ALIAS("platform:lp873x-pmic");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577-regulator.c
index b2daa6641..b2daa6641 100644
--- a/drivers/regulator/max14577.c
+++ b/drivers/regulator/max14577-regulator.c
diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
index 73a3356a5..a1b49a6d5 100644
--- a/drivers/regulator/max77620-regulator.c
+++ b/drivers/regulator/max77620-regulator.c
@@ -81,6 +81,7 @@ struct max77620_regulator_pdata {
 	int suspend_fps_pd_slot;
 	int suspend_fps_pu_slot;
 	int current_mode;
+	int ramp_rate_setting;
 };
 
 struct max77620_regulator {
@@ -122,6 +123,9 @@ static int max77620_regulator_set_fps_src(struct max77620_regulator *pmic,
 	unsigned int val;
 	int ret;
 
+	if (!rinfo)
+		return 0;
+
 	switch (fps_src) {
 	case MAX77620_FPS_SRC_0:
 	case MAX77620_FPS_SRC_1:
@@ -170,6 +174,9 @@ static int max77620_regulator_set_fps_slots(struct max77620_regulator *pmic,
 	int pd = rpdata->active_fps_pd_slot;
 	int ret = 0;
 
+	if (!rinfo)
+		return 0;
+
 	if (is_suspend) {
 		pu = rpdata->suspend_fps_pu_slot;
 		pd = rpdata->suspend_fps_pd_slot;
@@ -307,6 +314,43 @@ static int max77620_read_slew_rate(struct max77620_regulator *pmic, int id)
 	return 0;
 }
 
+static int max77620_set_slew_rate(struct max77620_regulator *pmic, int id,
+				  int slew_rate)
+{
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	unsigned int val;
+	int ret;
+	u8 mask;
+
+	if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) {
+		if (slew_rate <= 13750)
+			val = 0;
+		else if (slew_rate <= 27500)
+			val = 1;
+		else if (slew_rate <= 55000)
+			val = 2;
+		else
+			val = 3;
+		val <<= MAX77620_SD_SR_SHIFT;
+		mask = MAX77620_SD_SR_MASK;
+	} else {
+		if (slew_rate <= 5000)
+			val = 1;
+		else
+			val = 0;
+		mask = MAX77620_LDO_SLEW_RATE_MASK;
+	}
+
+	ret = regmap_update_bits(pmic->rmap, rinfo->cfg_addr, mask, val);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Regulator %d slew rate set failed: %d\n",
+			id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int max77620_init_pmic(struct max77620_regulator *pmic, int id)
 {
 	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
@@ -351,6 +395,13 @@ static int max77620_init_pmic(struct max77620_regulator *pmic, int id)
 	if (ret < 0)
 		return ret;
 
+	if (rpdata->ramp_rate_setting) {
+		ret = max77620_set_slew_rate(pmic, id,
+					     rpdata->ramp_rate_setting);
+		if (ret < 0)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -502,35 +553,16 @@ static int max77620_regulator_set_ramp_delay(struct regulator_dev *rdev,
 {
 	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
 	int id = rdev_get_id(rdev);
-	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
-	int ret, val;
-	u8 mask;
-
-	if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) {
-		if (ramp_delay <= 13750)
-			val = 0;
-		else if (ramp_delay <= 27500)
-			val = 1;
-		else if (ramp_delay <= 55000)
-			val = 2;
-		else
-			val = 3;
-		val <<= MAX77620_SD_SR_SHIFT;
-		mask = MAX77620_SD_SR_MASK;
-	} else {
-		if (ramp_delay <= 5000)
-			val = 1;
-		else
-			val = 0;
-		mask = MAX77620_LDO_SLEW_RATE_MASK;
-	}
+	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
 
-	ret = regmap_update_bits(pmic->rmap, rinfo->cfg_addr, mask, val);
-	if (ret < 0)
-		dev_err(pmic->dev, "Reg 0x%02x update failed: %d\n",
-			rinfo->cfg_addr, ret);
+	/* Device specific ramp rate setting tells that platform has
+	 * different ramp rate from advertised value. In this case,
+	 * do not configure anything and just return success.
+	 */
+	if (rpdata->ramp_rate_setting)
+		return 0;
 
-	return ret;
+	return max77620_set_slew_rate(pmic, id, ramp_delay);
 }
 
 static int max77620_of_parse_cb(struct device_node *np,
@@ -563,6 +595,9 @@ static int max77620_of_parse_cb(struct device_node *np,
 			np, "maxim,suspend-fps-power-down-slot", &pval);
 	rpdata->suspend_fps_pd_slot = (!ret) ? pval : -1;
 
+	ret = of_property_read_u32(np, "maxim,ramp-rate-setting", &pval);
+	rpdata->ramp_rate_setting = (!ret) ? pval : 0;
+
 	return max77620_init_pmic(pmic, desc->id);
 }
 
@@ -651,7 +686,6 @@ static struct max77620_regulator_info max77620_regs_info[MAX77620_NUM_REGS] = {
 	RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 1550000, 12500, 0x22, SD1),
 	RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE),
 	RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE),
-	RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE),
 
 	RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000),
 	RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000),
diff --git a/drivers/regulator/max77686-regulator.c b/drivers/regulator/max77686-regulator.c
index 17ccf365a..ac4fa581e 100644
--- a/drivers/regulator/max77686-regulator.c
+++ b/drivers/regulator/max77686-regulator.c
@@ -41,6 +41,8 @@
 #define MAX77686_LDO_LOW_UVSTEP	25000
 #define MAX77686_BUCK_MINUV	750000
 #define MAX77686_BUCK_UVSTEP	50000
+#define MAX77686_BUCK_ENABLE_TIME	40		/* us */
+#define MAX77686_DVS_ENABLE_TIME	22		/* us */
 #define MAX77686_RAMP_DELAY	100000			/* uV/us */
 #define MAX77686_DVS_RAMP_DELAY	27500			/* uV/us */
 #define MAX77686_DVS_MINUV	600000
@@ -422,6 +424,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 	.min_uV		= MAX77686_BUCK_MINUV,				\
 	.uV_step	= MAX77686_BUCK_UVSTEP,				\
 	.ramp_delay	= MAX77686_RAMP_DELAY,				\
+	.enable_time	= MAX77686_BUCK_ENABLE_TIME,			\
 	.n_voltages	= MAX77686_VSEL_MASK + 1,			\
 	.vsel_reg	= MAX77686_REG_BUCK5OUT + (num - 5) * 2,	\
 	.vsel_mask	= MAX77686_VSEL_MASK,				\
@@ -439,6 +442,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 	.min_uV		= MAX77686_BUCK_MINUV,				\
 	.uV_step	= MAX77686_BUCK_UVSTEP,				\
 	.ramp_delay	= MAX77686_RAMP_DELAY,				\
+	.enable_time	= MAX77686_BUCK_ENABLE_TIME,			\
 	.n_voltages	= MAX77686_VSEL_MASK + 1,			\
 	.vsel_reg	= MAX77686_REG_BUCK1OUT,			\
 	.vsel_mask	= MAX77686_VSEL_MASK,				\
@@ -456,6 +460,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 	.min_uV		= MAX77686_DVS_MINUV,				\
 	.uV_step	= MAX77686_DVS_UVSTEP,				\
 	.ramp_delay	= MAX77686_DVS_RAMP_DELAY,			\
+	.enable_time	= MAX77686_DVS_ENABLE_TIME,			\
 	.n_voltages	= MAX77686_DVS_VSEL_MASK + 1,			\
 	.vsel_reg	= MAX77686_REG_BUCK2DVS1 + (num - 2) * 10,	\
 	.vsel_mask	= MAX77686_DVS_VSEL_MASK,			\
@@ -553,17 +558,7 @@ static struct platform_driver max77686_pmic_driver = {
 	.id_table = max77686_pmic_id,
 };
 
-static int __init max77686_pmic_init(void)
-{
-	return platform_driver_register(&max77686_pmic_driver);
-}
-subsys_initcall(max77686_pmic_init);
-
-static void __exit max77686_pmic_cleanup(void)
-{
-	platform_driver_unregister(&max77686_pmic_driver);
-}
-module_exit(max77686_pmic_cleanup);
+module_platform_driver(max77686_pmic_driver);
 
 MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
 MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>");
diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693-regulator.c
index de730fd3f..de730fd3f 100644
--- a/drivers/regulator/max77693.c
+++ b/drivers/regulator/max77693-regulator.c
diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index c07ee13bd..1d3539324 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -5,7 +5,7 @@
  * Simon Glass <sjg@chromium.org>
  *
  * Copyright (C) 2012 Samsung Electronics
- * Chiwoong Byun <woong.byun@smasung.com>
+ * Chiwoong Byun <woong.byun@samsung.com>
  * Jonghwa Lee <jonghwa3.lee@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index 5b75b7c2e..08d2f13ec 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -38,6 +38,9 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/regmap.h>
+#include <linux/thermal.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
 
 /* Register definitions */
 #define MAX8973_VOUT					0x0
@@ -74,6 +77,7 @@
 #define MAX8973_WDTMR_ENABLE				BIT(6)
 #define MAX8973_DISCH_ENBABLE				BIT(5)
 #define MAX8973_FT_ENABLE				BIT(4)
+#define MAX77621_T_JUNCTION_120				BIT(7)
 
 #define MAX8973_CKKADV_TRIP_MASK			0xC
 #define MAX8973_CKKADV_TRIP_DISABLE			0xC
@@ -93,6 +97,12 @@
 #define MAX8973_VOLATGE_STEP				6250
 #define MAX8973_BUCK_N_VOLTAGE				0x80
 
+#define MAX77621_CHIPID_TJINT_S				BIT(0)
+
+#define MAX77621_NORMAL_OPERATING_TEMP			100000
+#define MAX77621_TJINT_WARNING_TEMP_120			120000
+#define MAX77621_TJINT_WARNING_TEMP_140			140000
+
 enum device_id {
 	MAX8973,
 	MAX77621
@@ -112,6 +122,9 @@ struct max8973_chip {
 	int curr_gpio_val;
 	struct regulator_ops ops;
 	enum device_id id;
+	int junction_temp_warning;
+	int irq;
+	struct thermal_zone_device *tz_device;
 };
 
 /*
@@ -391,6 +404,10 @@ static int max8973_init_dcdc(struct max8973_chip *max,
 	if (pdata->control_flags & MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE)
 		control1 |= MAX8973_FREQSHIFT_9PER;
 
+	if ((pdata->junction_temp_warning == MAX77621_TJINT_WARNING_TEMP_120) &&
+	    (max->id == MAX77621))
+		control2 |= MAX77621_T_JUNCTION_120;
+
 	if (!(pdata->control_flags & MAX8973_CONTROL_PULL_DOWN_ENABLE))
 		control2 |= MAX8973_DISCH_ENBABLE;
 
@@ -457,6 +474,79 @@ static int max8973_init_dcdc(struct max8973_chip *max,
 	return ret;
 }
 
+static int max8973_thermal_read_temp(void *data, int *temp)
+{
+	struct max8973_chip *mchip = data;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(mchip->regmap, MAX8973_CHIPID1, &val);
+	if (ret < 0) {
+		dev_err(mchip->dev, "Failed to read register CHIPID1, %d", ret);
+		return ret;
+	}
+
+	/* +1 degC to trigger cool devive */
+	if (val & MAX77621_CHIPID_TJINT_S)
+		*temp = mchip->junction_temp_warning + 1000;
+	else
+		*temp = MAX77621_NORMAL_OPERATING_TEMP;
+
+	return 0;
+}
+
+static irqreturn_t max8973_thermal_irq(int irq, void *data)
+{
+	struct max8973_chip *mchip = data;
+
+	thermal_zone_device_update(mchip->tz_device);
+
+	return IRQ_HANDLED;
+}
+
+static const struct thermal_zone_of_device_ops max77621_tz_ops = {
+	.get_temp = max8973_thermal_read_temp,
+};
+
+static int max8973_thermal_init(struct max8973_chip *mchip)
+{
+	struct thermal_zone_device *tzd;
+	struct irq_data *irq_data;
+	unsigned long irq_flags = 0;
+	int ret;
+
+	if (mchip->id != MAX77621)
+		return 0;
+
+	tzd = devm_thermal_zone_of_sensor_register(mchip->dev, 0, mchip,
+						   &max77621_tz_ops);
+	if (IS_ERR(tzd)) {
+		ret = PTR_ERR(tzd);
+		dev_err(mchip->dev, "Failed to register thermal sensor: %d\n",
+			ret);
+		return ret;
+	}
+
+	if (mchip->irq <= 0)
+		return 0;
+
+	irq_data = irq_get_irq_data(mchip->irq);
+	if (irq_data)
+		irq_flags = irqd_get_trigger_type(irq_data);
+
+	ret = devm_request_threaded_irq(mchip->dev, mchip->irq, NULL,
+					max8973_thermal_irq,
+					IRQF_ONESHOT | IRQF_SHARED | irq_flags,
+					dev_name(mchip->dev), mchip);
+	if (ret < 0) {
+		dev_err(mchip->dev, "Failed to request irq %d, %d\n",
+			mchip->irq, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static const struct regmap_config max8973_regmap_config = {
 	.reg_bits		= 8,
 	.val_bits		= 8,
@@ -521,6 +611,11 @@ static struct max8973_regulator_platform_data *max8973_parse_dt(
 		pdata->control_flags |= MAX8973_CONTROL_CLKADV_TRIP_DISABLED;
 	}
 
+	pdata->junction_temp_warning = MAX77621_TJINT_WARNING_TEMP_140;
+	ret = of_property_read_u32(np, "junction-warn-millicelsius", &pval);
+	if (!ret && (pval <= MAX77621_TJINT_WARNING_TEMP_120))
+		pdata->junction_temp_warning = MAX77621_TJINT_WARNING_TEMP_120;
+
 	return pdata;
 }
 
@@ -608,6 +703,7 @@ static int max8973_probe(struct i2c_client *client,
 	max->enable_external_control = pdata->enable_ext_control;
 	max->curr_gpio_val = pdata->dvs_def_state;
 	max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
+	max->junction_temp_warning = pdata->junction_temp_warning;
 
 	if (gpio_is_valid(max->enable_gpio))
 		max->enable_external_control = true;
@@ -718,6 +814,7 @@ static int max8973_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	max8973_thermal_init(max);
 	return 0;
 }
 
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997-regulator.c
index ea0196d44..efabc0ea0 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997-regulator.c
@@ -2,7 +2,7 @@
  * max8997.c - Regulator driver for the Maxim 8997/8966
  *
  * Copyright (C) 2011 Samsung Electronics
- * MyungJoo Ham <myungjoo.ham@smasung.com>
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 6b0aa80b2..cd828dbf9 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -45,9 +45,9 @@ static void of_get_regulation_constraints(struct device_node *np,
 	/* Voltage change possible? */
 	if (constraints->min_uV != constraints->max_uV)
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
-	/* Only one voltage?  Then make sure it's set. */
-	if (constraints->min_uV && constraints->max_uV &&
-	    constraints->min_uV == constraints->max_uV)
+
+	/* Do we have a voltage range, if so try to apply it? */
+	if (constraints->min_uV && constraints->max_uV)
 		constraints->apply_uV = true;
 
 	if (!of_property_read_u32(np, "regulator-microvolt-offset", &pval))
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 6efc7ee8a..f11d41dad 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -944,6 +944,8 @@ static int palmas_ldo_registration(struct palmas_pmic *pmic,
 			if (id == PALMAS_REG_LDO9) {
 				desc->ops = &palmas_ops_ldo9;
 				desc->bypass_reg = desc->enable_reg;
+				desc->bypass_val_on =
+						PALMAS_LDO9_CTRL_LDO_BYPASS_EN;
 				desc->bypass_mask =
 						PALMAS_LDO9_CTRL_LDO_BYPASS_EN;
 			}
@@ -1055,6 +1057,8 @@ static int tps65917_ldo_registration(struct palmas_pmic *pmic,
 			    id == TPS65917_REG_LDO2) {
 				desc->ops = &tps65917_ops_ldo_1_2;
 				desc->bypass_reg = desc->enable_reg;
+				desc->bypass_val_on =
+						TPS65917_LDO1_CTRL_BYPASS_EN;
 				desc->bypass_mask =
 						TPS65917_LDO1_CTRL_BYPASS_EN;
 			}
@@ -1206,6 +1210,7 @@ static int palmas_smps_registration(struct palmas_pmic *pmic,
 				desc->enable_mask = SMPS10_BOOST_EN;
 			desc->bypass_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
 							    PALMAS_SMPS10_CTRL);
+			desc->bypass_val_on = SMPS10_BYPASS_EN;
 			desc->bypass_mask = SMPS10_BYPASS_EN;
 			desc->min_uV = 3750000;
 			desc->uV_step = 1250000;
@@ -1462,10 +1467,10 @@ static struct palmas_pmic_driver_data tps65917_ddata = {
 	.ldo_register = tps65917_ldo_registration,
 };
 
-static void palmas_dt_to_pdata(struct device *dev,
-			       struct device_node *node,
-			       struct palmas_pmic_platform_data *pdata,
-			       struct palmas_pmic_driver_data *ddata)
+static int palmas_dt_to_pdata(struct device *dev,
+			      struct device_node *node,
+			      struct palmas_pmic_platform_data *pdata,
+			      struct palmas_pmic_driver_data *ddata)
 {
 	struct device_node *regulators;
 	u32 prop;
@@ -1474,7 +1479,7 @@ static void palmas_dt_to_pdata(struct device *dev,
 	regulators = of_get_child_by_name(node, "regulators");
 	if (!regulators) {
 		dev_info(dev, "regulator node not found\n");
-		return;
+		return 0;
 	}
 
 	ret = of_regulator_match(dev, regulators, ddata->palmas_matches,
@@ -1482,25 +1487,29 @@ static void palmas_dt_to_pdata(struct device *dev,
 	of_node_put(regulators);
 	if (ret < 0) {
 		dev_err(dev, "Error parsing regulator init data: %d\n", ret);
-		return;
+		return 0;
 	}
 
 	for (idx = 0; idx < ddata->max_reg; idx++) {
-		if (!ddata->palmas_matches[idx].init_data ||
-		    !ddata->palmas_matches[idx].of_node)
-			continue;
+		static struct of_regulator_match *match;
+		struct palmas_reg_init *rinit;
+		struct device_node *np;
 
-		pdata->reg_data[idx] = ddata->palmas_matches[idx].init_data;
+		match = &ddata->palmas_matches[idx];
+		np = match->of_node;
 
-		pdata->reg_init[idx] = devm_kzalloc(dev,
-				sizeof(struct palmas_reg_init), GFP_KERNEL);
+		if (!match->init_data || !np)
+			continue;
+
+		rinit = devm_kzalloc(dev, sizeof(*rinit), GFP_KERNEL);
+		if (!rinit)
+			return -ENOMEM;
 
-		pdata->reg_init[idx]->warm_reset =
-			of_property_read_bool(ddata->palmas_matches[idx].of_node,
-					      "ti,warm-reset");
+		pdata->reg_data[idx] = match->init_data;
+		pdata->reg_init[idx] = rinit;
 
-		ret = of_property_read_u32(ddata->palmas_matches[idx].of_node,
-					   "ti,roof-floor", &prop);
+		rinit->warm_reset = of_property_read_bool(np, "ti,warm-reset");
+		ret = of_property_read_u32(np, "ti,roof-floor", &prop);
 		/* EINVAL: Property not found */
 		if (ret != -EINVAL) {
 			int econtrol;
@@ -1522,31 +1531,29 @@ static void palmas_dt_to_pdata(struct device *dev,
 					WARN_ON(1);
 					dev_warn(dev,
 						 "%s: Invalid roof-floor option: %u\n",
-					     palmas_matches[idx].name, prop);
+						 match->name, prop);
 					break;
 				}
 			}
-			pdata->reg_init[idx]->roof_floor = econtrol;
+			rinit->roof_floor = econtrol;
 		}
 
-		ret = of_property_read_u32(ddata->palmas_matches[idx].of_node,
-					   "ti,mode-sleep", &prop);
+		ret = of_property_read_u32(np, "ti,mode-sleep", &prop);
 		if (!ret)
-			pdata->reg_init[idx]->mode_sleep = prop;
+			rinit->mode_sleep = prop;
 
-		ret = of_property_read_bool(ddata->palmas_matches[idx].of_node,
-					    "ti,smps-range");
+		ret = of_property_read_bool(np, "ti,smps-range");
 		if (ret)
-			pdata->reg_init[idx]->vsel =
-				PALMAS_SMPS12_VOLTAGE_RANGE;
+			rinit->vsel = PALMAS_SMPS12_VOLTAGE_RANGE;
 
 		if (idx == PALMAS_REG_LDO8)
 			pdata->enable_ldo8_tracking = of_property_read_bool(
-						ddata->palmas_matches[idx].of_node,
-						"ti,enable-ldo8-tracking");
+						np, "ti,enable-ldo8-tracking");
 	}
 
 	pdata->ldo6_vibrator = of_property_read_bool(node, "ti,ldo6-vibrator");
+
+	return 0;
 }
 
 static const struct of_device_id of_palmas_match_tbl[] = {
@@ -1628,7 +1635,9 @@ static int palmas_regulators_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, pmic);
 	pmic->palmas->pmic_ddata = driver_data;
 
-	palmas_dt_to_pdata(&pdev->dev, node, pdata, driver_data);
+	ret = palmas_dt_to_pdata(&pdev->dev, node, pdata, driver_data);
+	if (ret)
+		return ret;
 
 	ret = palmas_smps_read(palmas, PALMAS_SMPS_CTRL, &reg);
 	if (ret)
diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c
new file mode 100644
index 000000000..d7107566c
--- /dev/null
+++ b/drivers/regulator/pv88080-regulator.c
@@ -0,0 +1,419 @@
+/*
+ * pv88080-regulator.c - Regulator device driver for PV88080
+ * Copyright (C) 2016  Powerventure Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include "pv88080-regulator.h"
+
+#define PV88080_MAX_REGULATORS	3
+
+/* PV88080 REGULATOR IDs */
+enum {
+	/* BUCKs */
+	PV88080_ID_BUCK1,
+	PV88080_ID_BUCK2,
+	PV88080_ID_BUCK3,
+};
+
+struct pv88080_regulator {
+	struct regulator_desc desc;
+	/* Current limiting */
+	unsigned int n_current_limits;
+	const int *current_limits;
+	unsigned int limit_mask;
+	unsigned int conf;
+	unsigned int conf2;
+	unsigned int conf5;
+};
+
+struct pv88080 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct regulator_dev *rdev[PV88080_MAX_REGULATORS];
+};
+
+struct pv88080_buck_voltage {
+	int min_uV;
+	int max_uV;
+	int uV_step;
+};
+
+static const struct regmap_config pv88080_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+/* Current limits array (in uA) for BUCK1, BUCK2, BUCK3.
+ * Entry indexes corresponds to register values.
+ */
+
+static const int pv88080_buck1_limits[] = {
+	3230000, 5130000, 6960000, 8790000
+};
+
+static const int pv88080_buck23_limits[] = {
+	1496000, 2393000, 3291000, 4189000
+};
+
+static const struct pv88080_buck_voltage pv88080_buck_vol[2] = {
+	{
+		.min_uV = 600000,
+		.max_uV = 1393750,
+		.uV_step = 6250,
+	},
+	{
+		.min_uV = 1400000,
+		.max_uV = 2193750,
+		.uV_step = 6250,
+	},
+};
+
+static unsigned int pv88080_buck_get_mode(struct regulator_dev *rdev)
+{
+	struct pv88080_regulator *info = rdev_get_drvdata(rdev);
+	unsigned int data;
+	int ret, mode = 0;
+
+	ret = regmap_read(rdev->regmap, info->conf, &data);
+	if (ret < 0)
+		return ret;
+
+	switch (data & PV88080_BUCK1_MODE_MASK) {
+	case PV88080_BUCK_MODE_SYNC:
+		mode = REGULATOR_MODE_FAST;
+		break;
+	case PV88080_BUCK_MODE_AUTO:
+		mode = REGULATOR_MODE_NORMAL;
+		break;
+	case PV88080_BUCK_MODE_SLEEP:
+		mode = REGULATOR_MODE_STANDBY;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return mode;
+}
+
+static int pv88080_buck_set_mode(struct regulator_dev *rdev,
+					unsigned int mode)
+{
+	struct pv88080_regulator *info = rdev_get_drvdata(rdev);
+	int val = 0;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = PV88080_BUCK_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = PV88080_BUCK_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = PV88080_BUCK_MODE_SLEEP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(rdev->regmap, info->conf,
+					PV88080_BUCK1_MODE_MASK, val);
+}
+
+static int pv88080_set_current_limit(struct regulator_dev *rdev, int min,
+				    int max)
+{
+	struct pv88080_regulator *info = rdev_get_drvdata(rdev);
+	int i;
+
+	/* search for closest to maximum */
+	for (i = info->n_current_limits; i >= 0; i--) {
+		if (min <= info->current_limits[i]
+			&& max >= info->current_limits[i]) {
+				return regmap_update_bits(rdev->regmap,
+					info->conf,
+					info->limit_mask,
+					i << PV88080_BUCK1_ILIM_SHIFT);
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int pv88080_get_current_limit(struct regulator_dev *rdev)
+{
+	struct pv88080_regulator *info = rdev_get_drvdata(rdev);
+	unsigned int data;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, info->conf, &data);
+	if (ret < 0)
+		return ret;
+
+	data = (data & info->limit_mask) >> PV88080_BUCK1_ILIM_SHIFT;
+	return info->current_limits[data];
+}
+
+static struct regulator_ops pv88080_buck_ops = {
+	.get_mode = pv88080_buck_get_mode,
+	.set_mode = pv88080_buck_set_mode,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_current_limit = pv88080_set_current_limit,
+	.get_current_limit = pv88080_get_current_limit,
+};
+
+#define PV88080_BUCK(chip, regl_name, min, step, max, limits_array) \
+{\
+	.desc	=	{\
+		.id = chip##_ID_##regl_name,\
+		.name = __stringify(chip##_##regl_name),\
+		.of_match = of_match_ptr(#regl_name),\
+		.regulators_node = of_match_ptr("regulators"),\
+		.type = REGULATOR_VOLTAGE,\
+		.owner = THIS_MODULE,\
+		.ops = &pv88080_buck_ops,\
+		.min_uV = min, \
+		.uV_step = step, \
+		.n_voltages = ((max) - (min))/(step) + 1, \
+		.enable_reg = PV88080_REG_##regl_name##_CONF0, \
+		.enable_mask = PV88080_##regl_name##_EN, \
+		.vsel_reg = PV88080_REG_##regl_name##_CONF0, \
+		.vsel_mask = PV88080_V##regl_name##_MASK, \
+	},\
+	.current_limits = limits_array, \
+	.n_current_limits = ARRAY_SIZE(limits_array), \
+	.limit_mask = PV88080_##regl_name##_ILIM_MASK, \
+	.conf = PV88080_REG_##regl_name##_CONF1, \
+	.conf2 = PV88080_REG_##regl_name##_CONF2, \
+	.conf5 = PV88080_REG_##regl_name##_CONF5, \
+}
+
+static struct pv88080_regulator pv88080_regulator_info[] = {
+	PV88080_BUCK(PV88080, BUCK1, 600000, 6250, 1393750,
+		pv88080_buck1_limits),
+	PV88080_BUCK(PV88080, BUCK2, 600000, 6250, 1393750,
+		pv88080_buck23_limits),
+	PV88080_BUCK(PV88080, BUCK3, 600000, 6250, 1393750,
+		pv88080_buck23_limits),
+};
+
+static irqreturn_t pv88080_irq_handler(int irq, void *data)
+{
+	struct pv88080 *chip = data;
+	int i, reg_val, err, ret = IRQ_NONE;
+
+	err = regmap_read(chip->regmap, PV88080_REG_EVENT_A, &reg_val);
+	if (err < 0)
+		goto error_i2c;
+
+	if (reg_val & PV88080_E_VDD_FLT) {
+		for (i = 0; i < PV88080_MAX_REGULATORS; i++) {
+			if (chip->rdev[i] != NULL) {
+				regulator_notifier_call_chain(chip->rdev[i],
+					REGULATOR_EVENT_UNDER_VOLTAGE,
+					NULL);
+			}
+		}
+
+		err = regmap_write(chip->regmap, PV88080_REG_EVENT_A,
+			PV88080_E_VDD_FLT);
+		if (err < 0)
+			goto error_i2c;
+
+		ret = IRQ_HANDLED;
+	}
+
+	if (reg_val & PV88080_E_OVER_TEMP) {
+		for (i = 0; i < PV88080_MAX_REGULATORS; i++) {
+			if (chip->rdev[i] != NULL) {
+				regulator_notifier_call_chain(chip->rdev[i],
+					REGULATOR_EVENT_OVER_TEMP,
+					NULL);
+			}
+		}
+
+		err = regmap_write(chip->regmap, PV88080_REG_EVENT_A,
+			PV88080_E_OVER_TEMP);
+		if (err < 0)
+			goto error_i2c;
+
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+
+error_i2c:
+	dev_err(chip->dev, "I2C error : %d\n", err);
+	return IRQ_NONE;
+}
+
+/*
+ * I2C driver interface functions
+ */
+static int pv88080_i2c_probe(struct i2c_client *i2c,
+		const struct i2c_device_id *id)
+{
+	struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
+	struct pv88080 *chip;
+	struct regulator_config config = { };
+	int i, error, ret;
+	unsigned int conf2, conf5;
+
+	chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88080), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &i2c->dev;
+	chip->regmap = devm_regmap_init_i2c(i2c, &pv88080_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		error = PTR_ERR(chip->regmap);
+		dev_err(chip->dev, "Failed to allocate register map: %d\n",
+			error);
+		return error;
+	}
+
+	i2c_set_clientdata(i2c, chip);
+
+	if (i2c->irq != 0) {
+		ret = regmap_write(chip->regmap, PV88080_REG_MASK_A, 0xFF);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to mask A reg: %d\n", ret);
+			return ret;
+		}
+		ret = regmap_write(chip->regmap, PV88080_REG_MASK_B, 0xFF);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to mask B reg: %d\n", ret);
+			return ret;
+		}
+		ret = regmap_write(chip->regmap, PV88080_REG_MASK_C, 0xFF);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to mask C reg: %d\n", ret);
+			return ret;
+		}
+
+		ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
+					pv88080_irq_handler,
+					IRQF_TRIGGER_LOW|IRQF_ONESHOT,
+					"pv88080", chip);
+		if (ret != 0) {
+			dev_err(chip->dev, "Failed to request IRQ: %d\n",
+				i2c->irq);
+			return ret;
+		}
+
+		ret = regmap_update_bits(chip->regmap, PV88080_REG_MASK_A,
+			PV88080_M_VDD_FLT | PV88080_M_OVER_TEMP, 0);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to update mask reg: %d\n", ret);
+			return ret;
+		}
+
+	} else {
+		dev_warn(chip->dev, "No IRQ configured\n");
+	}
+
+	config.dev = chip->dev;
+	config.regmap = chip->regmap;
+
+	for (i = 0; i < PV88080_MAX_REGULATORS; i++) {
+		if (init_data)
+			config.init_data = &init_data[i];
+
+		ret = regmap_read(chip->regmap,
+			pv88080_regulator_info[i].conf2, &conf2);
+		if (ret < 0)
+			return ret;
+
+		conf2 = ((conf2 >> PV88080_BUCK_VDAC_RANGE_SHIFT) &
+			PV88080_BUCK_VDAC_RANGE_MASK);
+
+		ret = regmap_read(chip->regmap,
+			pv88080_regulator_info[i].conf5, &conf5);
+		if (ret < 0)
+			return ret;
+
+		conf5 = ((conf5 >> PV88080_BUCK_VRANGE_GAIN_SHIFT) &
+			PV88080_BUCK_VRANGE_GAIN_MASK);
+
+		pv88080_regulator_info[i].desc.min_uV =
+			pv88080_buck_vol[conf2].min_uV * (conf5+1);
+		pv88080_regulator_info[i].desc.uV_step =
+			pv88080_buck_vol[conf2].uV_step * (conf5+1);
+		pv88080_regulator_info[i].desc.n_voltages =
+			((pv88080_buck_vol[conf2].max_uV * (conf5+1))
+			- (pv88080_regulator_info[i].desc.min_uV))
+			/(pv88080_regulator_info[i].desc.uV_step) + 1;
+
+		config.driver_data = (void *)&pv88080_regulator_info[i];
+		chip->rdev[i] = devm_regulator_register(chip->dev,
+			&pv88080_regulator_info[i].desc, &config);
+		if (IS_ERR(chip->rdev[i])) {
+			dev_err(chip->dev,
+				"Failed to register PV88080 regulator\n");
+			return PTR_ERR(chip->rdev[i]);
+		}
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id pv88080_i2c_id[] = {
+	{"pv88080", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, pv88080_i2c_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pv88080_dt_ids[] = {
+	{ .compatible = "pvs,pv88080", .data = &pv88080_i2c_id[0] },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pv88080_dt_ids);
+#endif
+
+static struct i2c_driver pv88080_regulator_driver = {
+	.driver = {
+		.name = "pv88080",
+		.of_match_table = of_match_ptr(pv88080_dt_ids),
+	},
+	.probe = pv88080_i2c_probe,
+	.id_table = pv88080_i2c_id,
+};
+
+module_i2c_driver(pv88080_regulator_driver);
+
+MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
+MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88080");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/pv88080-regulator.h b/drivers/regulator/pv88080-regulator.h
new file mode 100644
index 000000000..5e9afde60
--- /dev/null
+++ b/drivers/regulator/pv88080-regulator.h
@@ -0,0 +1,92 @@
+/*
+ * pv88080-regulator.h - Regulator definitions for PV88080
+ * Copyright (C) 2016 Powerventure Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __PV88080_REGISTERS_H__
+#define __PV88080_REGISTERS_H__
+
+/* System Control and Event Registers */
+#define	PV88080_REG_EVENT_A			0x04
+#define	PV88080_REG_MASK_A			0x09
+#define	PV88080_REG_MASK_B			0x0a
+#define	PV88080_REG_MASK_C			0x0b
+
+/* Regulator Registers */
+#define	PV88080_REG_BUCK1_CONF0			0x27
+#define	PV88080_REG_BUCK1_CONF1			0x28
+#define	PV88080_REG_BUCK1_CONF2			0x59
+#define	PV88080_REG_BUCK1_CONF5			0x5c
+#define	PV88080_REG_BUCK2_CONF0			0x29
+#define	PV88080_REG_BUCK2_CONF1			0x2a
+#define	PV88080_REG_BUCK2_CONF2			0x61
+#define	PV88080_REG_BUCK2_CONF5			0x64
+#define	PV88080_REG_BUCK3_CONF0			0x2b
+#define	PV88080_REG_BUCK3_CONF1			0x2c
+#define	PV88080_REG_BUCK3_CONF2			0x69
+#define	PV88080_REG_BUCK3_CONF5			0x6c
+
+/* PV88080_REG_EVENT_A (addr=0x04) */
+#define	PV88080_E_VDD_FLT				0x01
+#define	PV88080_E_OVER_TEMP			0x02
+
+/* PV88080_REG_MASK_A (addr=0x09) */
+#define	PV88080_M_VDD_FLT				0x01
+#define	PV88080_M_OVER_TEMP			0x02
+
+/* PV88080_REG_BUCK1_CONF0 (addr=0x27) */
+#define	PV88080_BUCK1_EN				0x80
+#define PV88080_VBUCK1_MASK			0x7F
+/* PV88080_REG_BUCK2_CONF0 (addr=0x29) */
+#define	PV88080_BUCK2_EN				0x80
+#define PV88080_VBUCK2_MASK			0x7F
+/* PV88080_REG_BUCK3_CONF0 (addr=0x2b) */
+#define	PV88080_BUCK3_EN				0x80
+#define PV88080_VBUCK3_MASK			0x7F
+
+/* PV88080_REG_BUCK1_CONF1 (addr=0x28) */
+#define PV88080_BUCK1_ILIM_SHIFT			2
+#define PV88080_BUCK1_ILIM_MASK			0x0C
+#define PV88080_BUCK1_MODE_MASK			0x03
+
+/* PV88080_REG_BUCK2_CONF1 (addr=0x2a) */
+#define PV88080_BUCK2_ILIM_SHIFT			2
+#define PV88080_BUCK2_ILIM_MASK			0x0C
+#define PV88080_BUCK2_MODE_MASK			0x03
+
+/* PV88080_REG_BUCK3_CONF1 (addr=0x2c) */
+#define PV88080_BUCK3_ILIM_SHIFT			2
+#define PV88080_BUCK3_ILIM_MASK			0x0C
+#define PV88080_BUCK3_MODE_MASK			0x03
+
+#define	PV88080_BUCK_MODE_SLEEP			0x00
+#define	PV88080_BUCK_MODE_AUTO			0x01
+#define	PV88080_BUCK_MODE_SYNC			0x02
+
+/* PV88080_REG_BUCK2_CONF2 (addr=0x61) */
+/* PV88080_REG_BUCK3_CONF2 (addr=0x69) */
+#define PV88080_BUCK_VDAC_RANGE_SHIFT			7
+#define PV88080_BUCK_VDAC_RANGE_MASK			0x01
+
+#define PV88080_BUCK_VDAC_RANGE_1			0x00
+#define PV88080_BUCK_VDAC_RANGE_2			0x01
+
+/* PV88080_REG_BUCK2_CONF5 (addr=0x64) */
+/* PV88080_REG_BUCK3_CONF5 (addr=0x6c) */
+#define PV88080_BUCK_VRANGE_GAIN_SHIFT			0
+#define PV88080_BUCK_VRANGE_GAIN_MASK			0x01
+
+#define PV88080_BUCK_VRANGE_GAIN_1			0x00
+#define PV88080_BUCK_VRANGE_GAIN_2			0x01
+
+#endif	/* __PV88080_REGISTERS_H__ */
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 4689d62f4..fafa3488e 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -59,18 +59,18 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
 					 unsigned selector)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
-	unsigned int pwm_reg_period;
+	struct pwm_args pargs;
 	int dutycycle;
 	int ret;
 
-	pwm_reg_period = pwm_get_period(drvdata->pwm);
+	pwm_get_args(drvdata->pwm, &pargs);
 
-	dutycycle = (pwm_reg_period *
+	dutycycle = (pargs.period *
 		    drvdata->duty_cycle_table[selector].dutycycle) / 100;
 
-	ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period);
+	ret = pwm_config(drvdata->pwm, dutycycle, pargs.period);
 	if (ret) {
-		dev_err(&rdev->dev, "Failed to configure PWM\n");
+		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
 		return ret;
 	}
 
@@ -113,18 +113,6 @@ static int pwm_regulator_is_enabled(struct regulator_dev *dev)
 	return pwm_is_enabled(drvdata->pwm);
 }
 
-/**
- * Continuous voltage call-backs
- */
-static int pwm_voltage_to_duty_cycle_percentage(struct regulator_dev *rdev, int req_uV)
-{
-	int min_uV = rdev->constraints->min_uV;
-	int max_uV = rdev->constraints->max_uV;
-	int diff = max_uV - min_uV;
-
-	return ((req_uV * 100) - (min_uV * 100)) / diff;
-}
-
 static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
@@ -138,21 +126,42 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 	unsigned int ramp_delay = rdev->constraints->ramp_delay;
-	unsigned int period = pwm_get_period(drvdata->pwm);
-	int duty_cycle;
+	struct pwm_args pargs;
+	unsigned int req_diff = min_uV - rdev->constraints->min_uV;
+	unsigned int diff;
+	unsigned int duty_pulse;
+	u64 req_period;
+	u32 rem;
 	int ret;
 
-	duty_cycle = pwm_voltage_to_duty_cycle_percentage(rdev, min_uV);
+	pwm_get_args(drvdata->pwm, &pargs);
+	diff = rdev->constraints->max_uV - rdev->constraints->min_uV;
+
+	/* First try to find out if we get the iduty cycle time which is
+	 * factor of PWM period time. If (request_diff_to_min * pwm_period)
+	 * is perfect divided by voltage_range_diff then it is possible to
+	 * get duty cycle time which is factor of PWM period. This will help
+	 * to get output voltage nearer to requested value as there is no
+	 * calculation loss.
+	 */
+	req_period = req_diff * pargs.period;
+	div_u64_rem(req_period, diff, &rem);
+	if (!rem) {
+		do_div(req_period, diff);
+		duty_pulse = (unsigned int)req_period;
+	} else {
+		duty_pulse = (pargs.period / 100) * ((req_diff * 100) / diff);
+	}
 
-	ret = pwm_config(drvdata->pwm, (period / 100) * duty_cycle, period);
+	ret = pwm_config(drvdata->pwm, duty_pulse, pargs.period);
 	if (ret) {
-		dev_err(&rdev->dev, "Failed to configure PWM\n");
+		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
 		return ret;
 	}
 
 	ret = pwm_enable(drvdata->pwm);
 	if (ret) {
-		dev_err(&rdev->dev, "Failed to enable PWM\n");
+		dev_err(&rdev->dev, "Failed to enable PWM: %d\n", ret);
 		return ret;
 	}
 	drvdata->volt_uV = min_uV;
@@ -200,8 +209,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
 
 	if ((length < sizeof(*duty_cycle_table)) ||
 	    (length % sizeof(*duty_cycle_table))) {
-		dev_err(&pdev->dev,
-			"voltage-table length(%d) is invalid\n",
+		dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
 			length);
 		return -EINVAL;
 	}
@@ -214,7 +222,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
 					 (u32 *)duty_cycle_table,
 					 length / sizeof(u32));
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to read voltage-table\n");
+		dev_err(&pdev->dev, "Failed to read voltage-table: %d\n", ret);
 		return ret;
 	}
 
@@ -277,16 +285,24 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 
 	drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
 	if (IS_ERR(drvdata->pwm)) {
-		dev_err(&pdev->dev, "Failed to get PWM\n");
-		return PTR_ERR(drvdata->pwm);
+		ret = PTR_ERR(drvdata->pwm);
+		dev_err(&pdev->dev, "Failed to get PWM: %d\n", ret);
+		return ret;
 	}
 
+	/*
+	 * FIXME: pwm_apply_args() should be removed when switching to the
+	 * atomic PWM API.
+	 */
+	pwm_apply_args(drvdata->pwm);
+
 	regulator = devm_regulator_register(&pdev->dev,
 					    &drvdata->desc, &config);
 	if (IS_ERR(regulator)) {
-		dev_err(&pdev->dev, "Failed to register regulator %s\n",
-			drvdata->desc.name);
-		return PTR_ERR(regulator);
+		ret = PTR_ERR(regulator);
+		dev_err(&pdev->dev, "Failed to register regulator %s: %d\n",
+			drvdata->desc.name, ret);
+		return ret;
 	}
 
 	return 0;
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 88a5dc88b..84cce21e9 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -246,6 +246,7 @@ enum spmi_common_control_register_index {
 
 /* Minimum voltage stepper delay for each step. */
 #define SPMI_FTSMPS_STEP_DELAY		8
+#define SPMI_DEFAULT_STEP_DELAY		20
 
 /*
  * The ratio SPMI_FTSMPS_STEP_MARGIN_NUM/SPMI_FTSMPS_STEP_MARGIN_DEN is used to
@@ -254,13 +255,6 @@ enum spmi_common_control_register_index {
 #define SPMI_FTSMPS_STEP_MARGIN_NUM	4
 #define SPMI_FTSMPS_STEP_MARGIN_DEN	5
 
-/*
- * This voltage in uV is returned by get_voltage functions when there is no way
- * to determine the current voltage level.  It is needed because the regulator
- * framework treats a 0 uV voltage as an error.
- */
-#define VOLTAGE_UNKNOWN 1
-
 /* VSET value to decide the range of ULT SMPS */
 #define ULT_SMPS_RANGE_SPLIT 0x60
 
@@ -539,12 +533,12 @@ static int spmi_regulator_common_disable(struct regulator_dev *rdev)
 }
 
 static int spmi_regulator_select_voltage(struct spmi_regulator *vreg,
-		int min_uV, int max_uV, u8 *range_sel, u8 *voltage_sel,
-		unsigned *selector)
+					 int min_uV, int max_uV)
 {
 	const struct spmi_voltage_range *range;
 	int uV = min_uV;
 	int lim_min_uV, lim_max_uV, i, range_id, range_max_uV;
+	int selector, voltage_sel;
 
 	/* Check if request voltage is outside of physically settable range. */
 	lim_min_uV = vreg->set_points->range[0].set_point_min_uV;
@@ -570,14 +564,13 @@ static int spmi_regulator_select_voltage(struct spmi_regulator *vreg,
 
 	range_id = i;
 	range = &vreg->set_points->range[range_id];
-	*range_sel = range->range_sel;
 
 	/*
 	 * Force uV to be an allowed set point by applying a ceiling function to
 	 * the uV value.
 	 */
-	*voltage_sel = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
-	uV = *voltage_sel * range->step_uV + range->min_uV;
+	voltage_sel = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
+	uV = voltage_sel * range->step_uV + range->min_uV;
 
 	if (uV > max_uV) {
 		dev_err(vreg->dev,
@@ -587,12 +580,48 @@ static int spmi_regulator_select_voltage(struct spmi_regulator *vreg,
 		return -EINVAL;
 	}
 
-	*selector = 0;
+	selector = 0;
 	for (i = 0; i < range_id; i++)
-		*selector += vreg->set_points->range[i].n_voltages;
-	*selector += (uV - range->set_point_min_uV) / range->step_uV;
+		selector += vreg->set_points->range[i].n_voltages;
+	selector += (uV - range->set_point_min_uV) / range->step_uV;
 
-	return 0;
+	return selector;
+}
+
+static int spmi_sw_selector_to_hw(struct spmi_regulator *vreg,
+				  unsigned selector, u8 *range_sel,
+				  u8 *voltage_sel)
+{
+	const struct spmi_voltage_range *range, *end;
+
+	range = vreg->set_points->range;
+	end = range + vreg->set_points->count;
+
+	for (; range < end; range++) {
+		if (selector < range->n_voltages) {
+			*voltage_sel = selector;
+			*range_sel = range->range_sel;
+			return 0;
+		}
+
+		selector -= range->n_voltages;
+	}
+
+	return -EINVAL;
+}
+
+static int spmi_hw_selector_to_sw(struct spmi_regulator *vreg, u8 hw_sel,
+				  const struct spmi_voltage_range *range)
+{
+	int sw_sel = hw_sel;
+	const struct spmi_voltage_range *r = vreg->set_points->range;
+
+	while (r != range) {
+		sw_sel += r->n_voltages;
+		r++;
+	}
+
+	return sw_sel;
 }
 
 static const struct spmi_voltage_range *
@@ -614,12 +643,11 @@ spmi_regulator_find_range(struct spmi_regulator *vreg)
 }
 
 static int spmi_regulator_select_voltage_same_range(struct spmi_regulator *vreg,
-		int min_uV, int max_uV, u8 *range_sel, u8 *voltage_sel,
-		unsigned *selector)
+		int min_uV, int max_uV)
 {
 	const struct spmi_voltage_range *range;
 	int uV = min_uV;
-	int i;
+	int i, selector;
 
 	range = spmi_regulator_find_range(vreg);
 	if (!range)
@@ -637,8 +665,8 @@ static int spmi_regulator_select_voltage_same_range(struct spmi_regulator *vreg,
 	 * Force uV to be an allowed set point by applying a ceiling function to
 	 * the uV value.
 	 */
-	*voltage_sel = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
-	uV = *voltage_sel * range->step_uV + range->min_uV;
+	uV = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
+	uV = uV * range->step_uV + range->min_uV;
 
 	if (uV > max_uV) {
 		/*
@@ -648,43 +676,49 @@ static int spmi_regulator_select_voltage_same_range(struct spmi_regulator *vreg,
 		goto different_range;
 	}
 
-	*selector = 0;
+	selector = 0;
 	for (i = 0; i < vreg->set_points->count; i++) {
 		if (uV >= vreg->set_points->range[i].set_point_min_uV
 		    && uV <= vreg->set_points->range[i].set_point_max_uV) {
-			*selector +=
+			selector +=
 			    (uV - vreg->set_points->range[i].set_point_min_uV)
 				/ vreg->set_points->range[i].step_uV;
 			break;
 		}
 
-		*selector += vreg->set_points->range[i].n_voltages;
+		selector += vreg->set_points->range[i].n_voltages;
 	}
 
-	if (*selector >= vreg->set_points->n_voltages)
+	if (selector >= vreg->set_points->n_voltages)
 		goto different_range;
 
-	return 0;
+	return selector;
 
 different_range:
-	return spmi_regulator_select_voltage(vreg, min_uV, max_uV,
-			range_sel, voltage_sel, selector);
+	return spmi_regulator_select_voltage(vreg, min_uV, max_uV);
 }
 
-static int spmi_regulator_common_set_voltage(struct regulator_dev *rdev,
-		int min_uV, int max_uV, unsigned *selector)
+static int spmi_regulator_common_map_voltage(struct regulator_dev *rdev,
+					     int min_uV, int max_uV)
 {
 	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
-	int ret;
-	u8 buf[2];
-	u8 range_sel, voltage_sel;
 
 	/*
 	 * Favor staying in the current voltage range if possible.  This avoids
 	 * voltage spikes that occur when changing the voltage range.
 	 */
-	ret = spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV,
-		&range_sel, &voltage_sel, selector);
+	return spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV);
+}
+
+static int
+spmi_regulator_common_set_voltage(struct regulator_dev *rdev, unsigned selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int ret;
+	u8 buf[2];
+	u8 range_sel, voltage_sel;
+
+	ret = spmi_sw_selector_to_hw(vreg, selector, &range_sel, &voltage_sel);
 	if (ret)
 		return ret;
 
@@ -719,24 +753,24 @@ static int spmi_regulator_common_get_voltage(struct regulator_dev *rdev)
 
 	range = spmi_regulator_find_range(vreg);
 	if (!range)
-		return VOLTAGE_UNKNOWN;
+		return -EINVAL;
 
-	return range->step_uV * voltage_sel + range->min_uV;
+	return spmi_hw_selector_to_sw(vreg, voltage_sel, range);
 }
 
-static int spmi_regulator_single_range_set_voltage(struct regulator_dev *rdev,
-		int min_uV, int max_uV, unsigned *selector)
+static int spmi_regulator_single_map_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV)
 {
 	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
-	int ret;
-	u8 range_sel, sel;
 
-	ret = spmi_regulator_select_voltage(vreg, min_uV, max_uV, &range_sel,
-		&sel, selector);
-	if (ret) {
-		dev_err(vreg->dev, "could not set voltage, ret=%d\n", ret);
-		return ret;
-	}
+	return spmi_regulator_select_voltage(vreg, min_uV, max_uV);
+}
+
+static int spmi_regulator_single_range_set_voltage(struct regulator_dev *rdev,
+						   unsigned selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 sel = selector;
 
 	/*
 	 * Certain types of regulators do not have a range select register so
@@ -748,27 +782,24 @@ static int spmi_regulator_single_range_set_voltage(struct regulator_dev *rdev,
 static int spmi_regulator_single_range_get_voltage(struct regulator_dev *rdev)
 {
 	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
-	const struct spmi_voltage_range *range = vreg->set_points->range;
-	u8 voltage_sel;
+	u8 selector;
+	int ret;
 
-	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
+	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &selector, 1);
+	if (ret)
+		return ret;
 
-	return range->step_uV * voltage_sel + range->min_uV;
+	return selector;
 }
 
 static int spmi_regulator_ult_lo_smps_set_voltage(struct regulator_dev *rdev,
-		int min_uV, int max_uV, unsigned *selector)
+						  unsigned selector)
 {
 	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
 	int ret;
 	u8 range_sel, voltage_sel;
 
-	/*
-	 * Favor staying in the current voltage range if possible. This avoids
-	 * voltage spikes that occur when changing the voltage range.
-	 */
-	ret = spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV,
-		&range_sel, &voltage_sel, selector);
+	ret = spmi_sw_selector_to_hw(vreg, selector, &range_sel, &voltage_sel);
 	if (ret)
 		return ret;
 
@@ -783,7 +814,7 @@ static int spmi_regulator_ult_lo_smps_set_voltage(struct regulator_dev *rdev,
 		voltage_sel |= ULT_SMPS_RANGE_SPLIT;
 
 	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_VOLTAGE_SET,
-	       voltage_sel, 0xff);
+				     voltage_sel, 0xff);
 }
 
 static int spmi_regulator_ult_lo_smps_get_voltage(struct regulator_dev *rdev)
@@ -796,12 +827,12 @@ static int spmi_regulator_ult_lo_smps_get_voltage(struct regulator_dev *rdev)
 
 	range = spmi_regulator_find_range(vreg);
 	if (!range)
-		return VOLTAGE_UNKNOWN;
+		return -EINVAL;
 
 	if (range->range_sel == 1)
 		voltage_sel &= ~ULT_SMPS_RANGE_SPLIT;
 
-	return range->step_uV * voltage_sel + range->min_uV;
+	return spmi_hw_selector_to_sw(vreg, voltage_sel, range);
 }
 
 static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev,
@@ -1007,8 +1038,10 @@ static struct regulator_ops spmi_smps_ops = {
 	.enable			= spmi_regulator_common_enable,
 	.disable		= spmi_regulator_common_disable,
 	.is_enabled		= spmi_regulator_common_is_enabled,
-	.set_voltage		= spmi_regulator_common_set_voltage,
-	.get_voltage		= spmi_regulator_common_get_voltage,
+	.set_voltage_sel	= spmi_regulator_common_set_voltage,
+	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
+	.get_voltage_sel	= spmi_regulator_common_get_voltage,
+	.map_voltage		= spmi_regulator_common_map_voltage,
 	.list_voltage		= spmi_regulator_common_list_voltage,
 	.set_mode		= spmi_regulator_common_set_mode,
 	.get_mode		= spmi_regulator_common_get_mode,
@@ -1020,8 +1053,9 @@ static struct regulator_ops spmi_ldo_ops = {
 	.enable			= spmi_regulator_common_enable,
 	.disable		= spmi_regulator_common_disable,
 	.is_enabled		= spmi_regulator_common_is_enabled,
-	.set_voltage		= spmi_regulator_common_set_voltage,
-	.get_voltage		= spmi_regulator_common_get_voltage,
+	.set_voltage_sel	= spmi_regulator_common_set_voltage,
+	.get_voltage_sel	= spmi_regulator_common_get_voltage,
+	.map_voltage		= spmi_regulator_common_map_voltage,
 	.list_voltage		= spmi_regulator_common_list_voltage,
 	.set_mode		= spmi_regulator_common_set_mode,
 	.get_mode		= spmi_regulator_common_get_mode,
@@ -1036,8 +1070,9 @@ static struct regulator_ops spmi_ln_ldo_ops = {
 	.enable			= spmi_regulator_common_enable,
 	.disable		= spmi_regulator_common_disable,
 	.is_enabled		= spmi_regulator_common_is_enabled,
-	.set_voltage		= spmi_regulator_common_set_voltage,
-	.get_voltage		= spmi_regulator_common_get_voltage,
+	.set_voltage_sel	= spmi_regulator_common_set_voltage,
+	.get_voltage_sel	= spmi_regulator_common_get_voltage,
+	.map_voltage		= spmi_regulator_common_map_voltage,
 	.list_voltage		= spmi_regulator_common_list_voltage,
 	.set_bypass		= spmi_regulator_common_set_bypass,
 	.get_bypass		= spmi_regulator_common_get_bypass,
@@ -1056,8 +1091,9 @@ static struct regulator_ops spmi_boost_ops = {
 	.enable			= spmi_regulator_common_enable,
 	.disable		= spmi_regulator_common_disable,
 	.is_enabled		= spmi_regulator_common_is_enabled,
-	.set_voltage		= spmi_regulator_single_range_set_voltage,
-	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.set_voltage_sel	= spmi_regulator_single_range_set_voltage,
+	.get_voltage_sel	= spmi_regulator_single_range_get_voltage,
+	.map_voltage		= spmi_regulator_single_map_voltage,
 	.list_voltage		= spmi_regulator_common_list_voltage,
 	.set_input_current_limit = spmi_regulator_set_ilim,
 };
@@ -1066,9 +1102,10 @@ static struct regulator_ops spmi_ftsmps_ops = {
 	.enable			= spmi_regulator_common_enable,
 	.disable		= spmi_regulator_common_disable,
 	.is_enabled		= spmi_regulator_common_is_enabled,
-	.set_voltage		= spmi_regulator_common_set_voltage,
+	.set_voltage_sel	= spmi_regulator_common_set_voltage,
 	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
-	.get_voltage		= spmi_regulator_common_get_voltage,
+	.get_voltage_sel	= spmi_regulator_common_get_voltage,
+	.map_voltage		= spmi_regulator_common_map_voltage,
 	.list_voltage		= spmi_regulator_common_list_voltage,
 	.set_mode		= spmi_regulator_common_set_mode,
 	.get_mode		= spmi_regulator_common_get_mode,
@@ -1080,8 +1117,9 @@ static struct regulator_ops spmi_ult_lo_smps_ops = {
 	.enable			= spmi_regulator_common_enable,
 	.disable		= spmi_regulator_common_disable,
 	.is_enabled		= spmi_regulator_common_is_enabled,
-	.set_voltage		= spmi_regulator_ult_lo_smps_set_voltage,
-	.get_voltage		= spmi_regulator_ult_lo_smps_get_voltage,
+	.set_voltage_sel	= spmi_regulator_ult_lo_smps_set_voltage,
+	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
+	.get_voltage_sel	= spmi_regulator_ult_lo_smps_get_voltage,
 	.list_voltage		= spmi_regulator_common_list_voltage,
 	.set_mode		= spmi_regulator_common_set_mode,
 	.get_mode		= spmi_regulator_common_get_mode,
@@ -1093,8 +1131,10 @@ static struct regulator_ops spmi_ult_ho_smps_ops = {
 	.enable			= spmi_regulator_common_enable,
 	.disable		= spmi_regulator_common_disable,
 	.is_enabled		= spmi_regulator_common_is_enabled,
-	.set_voltage		= spmi_regulator_single_range_set_voltage,
-	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.set_voltage_sel	= spmi_regulator_single_range_set_voltage,
+	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
+	.get_voltage_sel	= spmi_regulator_single_range_get_voltage,
+	.map_voltage		= spmi_regulator_single_map_voltage,
 	.list_voltage		= spmi_regulator_common_list_voltage,
 	.set_mode		= spmi_regulator_common_set_mode,
 	.get_mode		= spmi_regulator_common_get_mode,
@@ -1106,8 +1146,9 @@ static struct regulator_ops spmi_ult_ldo_ops = {
 	.enable			= spmi_regulator_common_enable,
 	.disable		= spmi_regulator_common_disable,
 	.is_enabled		= spmi_regulator_common_is_enabled,
-	.set_voltage		= spmi_regulator_single_range_set_voltage,
-	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.set_voltage_sel	= spmi_regulator_single_range_set_voltage,
+	.get_voltage_sel	= spmi_regulator_single_range_get_voltage,
+	.map_voltage		= spmi_regulator_single_map_voltage,
 	.list_voltage		= spmi_regulator_common_list_voltage,
 	.set_mode		= spmi_regulator_common_set_mode,
 	.get_mode		= spmi_regulator_common_get_mode,
@@ -1201,7 +1242,7 @@ static int spmi_regulator_match(struct spmi_regulator *vreg, u16 force_type)
 	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_DIG_MAJOR_REV, version,
 		ARRAY_SIZE(version));
 	if (ret) {
-		dev_err(vreg->dev, "could not read version registers\n");
+		dev_dbg(vreg->dev, "could not read version registers\n");
 		return ret;
 	}
 	dig_major_rev	= version[SPMI_COMMON_REG_DIG_MAJOR_REV
@@ -1245,11 +1286,11 @@ found:
 	return 0;
 }
 
-static int spmi_regulator_ftsmps_init_slew_rate(struct spmi_regulator *vreg)
+static int spmi_regulator_init_slew_rate(struct spmi_regulator *vreg)
 {
 	int ret;
 	u8 reg = 0;
-	int step, delay, slew_rate;
+	int step, delay, slew_rate, step_delay;
 	const struct spmi_voltage_range *range;
 
 	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_STEP_CTRL, &reg, 1);
@@ -1262,6 +1303,15 @@ static int spmi_regulator_ftsmps_init_slew_rate(struct spmi_regulator *vreg)
 	if (!range)
 		return -EINVAL;
 
+	switch (vreg->logical_type) {
+	case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS:
+		step_delay = SPMI_FTSMPS_STEP_DELAY;
+		break;
+	default:
+		step_delay = SPMI_DEFAULT_STEP_DELAY;
+		break;
+	}
+
 	step = reg & SPMI_FTSMPS_STEP_CTRL_STEP_MASK;
 	step >>= SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT;
 
@@ -1270,7 +1320,7 @@ static int spmi_regulator_ftsmps_init_slew_rate(struct spmi_regulator *vreg)
 
 	/* slew_rate has units of uV/us */
 	slew_rate = SPMI_FTSMPS_CLOCK_RATE * range->step_uV * (1 << step);
-	slew_rate /= 1000 * (SPMI_FTSMPS_STEP_DELAY << delay);
+	slew_rate /= 1000 * (step_delay << delay);
 	slew_rate *= SPMI_FTSMPS_STEP_MARGIN_NUM;
 	slew_rate /= SPMI_FTSMPS_STEP_MARGIN_DEN;
 
@@ -1411,10 +1461,16 @@ static int spmi_regulator_of_parse(struct device_node *node,
 		return ret;
 	}
 
-	if (vreg->logical_type == SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS) {
-		ret = spmi_regulator_ftsmps_init_slew_rate(vreg);
+	switch (vreg->logical_type) {
+	case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS:
+	case SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS:
+	case SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS:
+	case SPMI_REGULATOR_LOGICAL_TYPE_SMPS:
+		ret = spmi_regulator_init_slew_rate(vreg);
 		if (ret)
 			return ret;
+	default:
+		break;
 	}
 
 	if (vreg->logical_type != SPMI_REGULATOR_LOGICAL_TYPE_VS)
@@ -1510,10 +1566,61 @@ static const struct spmi_regulator_data pm8916_regulators[] = {
 	{ }
 };
 
+static const struct spmi_regulator_data pm8994_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", },
+	{ "s5", 0x2000, "vdd_s5", },
+	{ "s6", 0x2300, "vdd_s6", },
+	{ "s7", 0x2600, "vdd_s7", },
+	{ "s8", 0x2900, "vdd_s8", },
+	{ "s9", 0x2c00, "vdd_s9", },
+	{ "s10", 0x2f00, "vdd_s10", },
+	{ "s11", 0x3200, "vdd_s11", },
+	{ "s12", 0x3500, "vdd_s12", },
+	{ "l1", 0x4000, "vdd_l1", },
+	{ "l2", 0x4100, "vdd_l2_l26_l28", },
+	{ "l3", 0x4200, "vdd_l3_l11", },
+	{ "l4", 0x4300, "vdd_l4_l27_l31", },
+	{ "l5", 0x4400, "vdd_l5_l7", },
+	{ "l6", 0x4500, "vdd_l6_l12_l32", },
+	{ "l7", 0x4600, "vdd_l5_l7", },
+	{ "l8", 0x4700, "vdd_l8_l16_l30", },
+	{ "l9", 0x4800, "vdd_l9_l10_l18_l22", },
+	{ "l10", 0x4900, "vdd_l9_l10_l18_l22", },
+	{ "l11", 0x4a00, "vdd_l3_l11", },
+	{ "l12", 0x4b00, "vdd_l6_l12_l32", },
+	{ "l13", 0x4c00, "vdd_l13_l19_l23_l24", },
+	{ "l14", 0x4d00, "vdd_l14_l15", },
+	{ "l15", 0x4e00, "vdd_l14_l15", },
+	{ "l16", 0x4f00, "vdd_l8_l16_l30", },
+	{ "l17", 0x5000, "vdd_l17_l29", },
+	{ "l18", 0x5100, "vdd_l9_l10_l18_l22", },
+	{ "l19", 0x5200, "vdd_l13_l19_l23_l24", },
+	{ "l20", 0x5300, "vdd_l20_l21", },
+	{ "l21", 0x5400, "vdd_l20_l21", },
+	{ "l22", 0x5500, "vdd_l9_l10_l18_l22", },
+	{ "l23", 0x5600, "vdd_l13_l19_l23_l24", },
+	{ "l24", 0x5700, "vdd_l13_l19_l23_l24", },
+	{ "l25", 0x5800, "vdd_l25", },
+	{ "l26", 0x5900, "vdd_l2_l26_l28", },
+	{ "l27", 0x5a00, "vdd_l4_l27_l31", },
+	{ "l28", 0x5b00, "vdd_l2_l26_l28", },
+	{ "l29", 0x5c00, "vdd_l17_l29", },
+	{ "l30", 0x5d00, "vdd_l8_l16_l30", },
+	{ "l31", 0x5e00, "vdd_l4_l27_l31", },
+	{ "l32", 0x5f00, "vdd_l6_l12_l32", },
+	{ "lvs1", 0x8000, "vdd_lvs_1_2", },
+	{ "lvs2", 0x8100, "vdd_lvs_1_2", },
+	{ }
+};
+
 static const struct of_device_id qcom_spmi_regulator_match[] = {
 	{ .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
 	{ .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators },
 	{ .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
+	{ .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match);
@@ -1573,7 +1680,7 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
 
 		ret = spmi_regulator_match(vreg, reg->force_type);
 		if (ret)
-			goto err;
+			continue;
 
 		config.dev = dev;
 		config.driver_data = vreg;
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index d86a3dcd6..40d07ba03 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -55,6 +55,42 @@
 /* max steps for increase voltage of Buck1/2, equal 100mv*/
 #define MAX_STEPS_ONE_TIME 8
 
+#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg,	\
+	_vmask, _ereg, _emask, _etime)					\
+	[_id] = {							\
+		.name		= (_match),				\
+		.supply_name	= (_supply),				\
+		.of_match	= of_match_ptr(_match),			\
+		.regulators_node = of_match_ptr("regulators"),		\
+		.type		= REGULATOR_VOLTAGE,			\
+		.id		= (_id),				\
+		.n_voltages	= (((_max) - (_min)) / (_step) + 1),	\
+		.owner		= THIS_MODULE,				\
+		.min_uV		= (_min) * 1000,			\
+		.uV_step	= (_step) * 1000,			\
+		.vsel_reg	= (_vreg),				\
+		.vsel_mask	= (_vmask),				\
+		.enable_reg	= (_ereg),				\
+		.enable_mask	= (_emask),				\
+		.enable_time	= (_etime),				\
+		.ops		= &rk808_reg_ops,			\
+	}
+
+#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask)		\
+	[_id] = {							\
+		.name		= (_match),				\
+		.supply_name	= (_supply),				\
+		.of_match	= of_match_ptr(_match),			\
+		.regulators_node = of_match_ptr("regulators"),		\
+		.type		= REGULATOR_VOLTAGE,			\
+		.id		= (_id),				\
+		.enable_reg	= (_ereg),				\
+		.enable_mask	= (_emask),				\
+		.owner		= THIS_MODULE,				\
+		.ops		= &rk808_switch_ops			\
+	}
+
+
 struct rk808_regulator_data {
 	struct gpio_desc *dvs_gpio[2];
 };
@@ -66,27 +102,11 @@ static const int rk808_buck_config_regs[] = {
 	RK808_BUCK4_CONFIG_REG,
 };
 
-static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
-};
-
-static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000),
-};
-
-static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000),
-};
-
 static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
 	REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
 };
 
-static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
-};
-
 static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -242,6 +262,21 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
 {
 	unsigned int reg;
+	int sel = regulator_map_voltage_linear(rdev, uv, uv);
+
+	if (sel < 0)
+		return -EINVAL;
+
+	reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+	return regmap_update_bits(rdev->regmap, reg,
+				  rdev->desc->vsel_mask,
+				  sel);
+}
+
+static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
+{
+	unsigned int reg;
 	int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
 
 	if (sel < 0)
@@ -277,8 +312,8 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
 }
 
 static struct regulator_ops rk808_buck1_2_ops = {
-	.list_voltage		= regulator_list_voltage_linear_range,
-	.map_voltage		= regulator_map_voltage_linear_range,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
 	.get_voltage_sel	= rk808_buck1_2_get_voltage_sel_regmap,
 	.set_voltage_sel	= rk808_buck1_2_set_voltage_sel,
 	.set_voltage_time_sel	= rk808_buck1_2_set_voltage_time_sel,
@@ -292,6 +327,19 @@ static struct regulator_ops rk808_buck1_2_ops = {
 };
 
 static struct regulator_ops rk808_reg_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_suspend_voltage	= rk808_set_suspend_voltage,
+	.set_suspend_enable	= rk808_set_suspend_enable,
+	.set_suspend_disable	= rk808_set_suspend_disable,
+};
+
+static struct regulator_ops rk808_reg_ops_ranges = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
@@ -299,7 +347,7 @@ static struct regulator_ops rk808_reg_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
-	.set_suspend_voltage	= rk808_set_suspend_voltage,
+	.set_suspend_voltage	= rk808_set_suspend_voltage_range,
 	.set_suspend_enable	= rk808_set_suspend_enable,
 	.set_suspend_disable	= rk808_set_suspend_disable,
 };
@@ -316,12 +364,14 @@ static const struct regulator_desc rk808_reg[] = {
 	{
 		.name = "DCDC_REG1",
 		.supply_name = "vcc1",
+		.of_match = of_match_ptr("DCDC_REG1"),
+		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_DCDC1,
 		.ops = &rk808_buck1_2_ops,
 		.type = REGULATOR_VOLTAGE,
+		.min_uV = 712500,
+		.uV_step = 12500,
 		.n_voltages = 64,
-		.linear_ranges = rk808_buck_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
 		.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
 		.vsel_mask = RK808_BUCK_VSEL_MASK,
 		.enable_reg = RK808_DCDC_EN_REG,
@@ -330,12 +380,14 @@ static const struct regulator_desc rk808_reg[] = {
 	}, {
 		.name = "DCDC_REG2",
 		.supply_name = "vcc2",
+		.of_match = of_match_ptr("DCDC_REG2"),
+		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_DCDC2,
 		.ops = &rk808_buck1_2_ops,
 		.type = REGULATOR_VOLTAGE,
+		.min_uV = 712500,
+		.uV_step = 12500,
 		.n_voltages = 64,
-		.linear_ranges = rk808_buck_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
 		.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
 		.vsel_mask = RK808_BUCK_VSEL_MASK,
 		.enable_reg = RK808_DCDC_EN_REG,
@@ -344,6 +396,8 @@ static const struct regulator_desc rk808_reg[] = {
 	}, {
 		.name = "DCDC_REG3",
 		.supply_name = "vcc3",
+		.of_match = of_match_ptr("DCDC_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_DCDC3,
 		.ops = &rk808_switch_ops,
 		.type = REGULATOR_VOLTAGE,
@@ -351,55 +405,23 @@ static const struct regulator_desc rk808_reg[] = {
 		.enable_reg = RK808_DCDC_EN_REG,
 		.enable_mask = BIT(2),
 		.owner = THIS_MODULE,
-	}, {
-		.name = "DCDC_REG4",
-		.supply_name = "vcc4",
-		.id = RK808_ID_DCDC4,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = 16,
-		.linear_ranges = rk808_buck4_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges),
-		.vsel_reg = RK808_BUCK4_ON_VSEL_REG,
-		.vsel_mask = RK808_BUCK4_VSEL_MASK,
-		.enable_reg = RK808_DCDC_EN_REG,
-		.enable_mask = BIT(3),
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG1",
-		.supply_name = "vcc6",
-		.id = RK808_ID_LDO1,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = 17,
-		.linear_ranges = rk808_ldo_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
-		.vsel_reg = RK808_LDO1_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(0),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG2",
-		.supply_name = "vcc6",
-		.id = RK808_ID_LDO2,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = 17,
-		.linear_ranges = rk808_ldo_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
-		.vsel_reg = RK808_LDO2_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(1),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
+	},
+	RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
+		RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
+		RK808_DCDC_EN_REG, BIT(3), 0),
+	RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+		RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(0), 400),
+	RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+		RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(1), 400),
+	{
 		.name = "LDO_REG3",
 		.supply_name = "vcc7",
+		.of_match = of_match_ptr("LDO_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_LDO3,
-		.ops = &rk808_reg_ops,
+		.ops = &rk808_reg_ops_ranges,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = 16,
 		.linear_ranges = rk808_ldo3_voltage_ranges,
@@ -410,117 +432,26 @@ static const struct regulator_desc rk808_reg[] = {
 		.enable_mask = BIT(2),
 		.enable_time = 400,
 		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG4",
-		.supply_name = "vcc9",
-		.id = RK808_ID_LDO4,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = 17,
-		.linear_ranges = rk808_ldo_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
-		.vsel_reg = RK808_LDO4_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(3),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG5",
-		.supply_name = "vcc9",
-		.id = RK808_ID_LDO5,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = 17,
-		.linear_ranges = rk808_ldo_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
-		.vsel_reg = RK808_LDO5_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(4),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG6",
-		.supply_name = "vcc10",
-		.id = RK808_ID_LDO6,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = 18,
-		.linear_ranges = rk808_ldo6_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
-		.vsel_reg = RK808_LDO6_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(5),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG7",
-		.supply_name = "vcc7",
-		.id = RK808_ID_LDO7,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = 18,
-		.linear_ranges = rk808_ldo6_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
-		.vsel_reg = RK808_LDO7_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(6),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG8",
-		.supply_name = "vcc11",
-		.id = RK808_ID_LDO8,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = 17,
-		.linear_ranges = rk808_ldo_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
-		.vsel_reg = RK808_LDO8_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(7),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "SWITCH_REG1",
-		.supply_name = "vcc8",
-		.id = RK808_ID_SWITCH1,
-		.ops = &rk808_switch_ops,
-		.type = REGULATOR_VOLTAGE,
-		.enable_reg = RK808_DCDC_EN_REG,
-		.enable_mask = BIT(5),
-		.owner = THIS_MODULE,
-	}, {
-		.name = "SWITCH_REG2",
-		.supply_name = "vcc12",
-		.id = RK808_ID_SWITCH2,
-		.ops = &rk808_switch_ops,
-		.type = REGULATOR_VOLTAGE,
-		.enable_reg = RK808_DCDC_EN_REG,
-		.enable_mask = BIT(6),
-		.owner = THIS_MODULE,
 	},
-};
-
-static struct of_regulator_match rk808_reg_matches[] = {
-	[RK808_ID_DCDC1]	= { .name = "DCDC_REG1" },
-	[RK808_ID_DCDC2]	= { .name = "DCDC_REG2" },
-	[RK808_ID_DCDC3]	= { .name = "DCDC_REG3" },
-	[RK808_ID_DCDC4]	= { .name = "DCDC_REG4" },
-	[RK808_ID_LDO1]		= { .name = "LDO_REG1" },
-	[RK808_ID_LDO2]		= { .name = "LDO_REG2" },
-	[RK808_ID_LDO3]		= { .name = "LDO_REG3" },
-	[RK808_ID_LDO4]		= { .name = "LDO_REG4" },
-	[RK808_ID_LDO5]		= { .name = "LDO_REG5" },
-	[RK808_ID_LDO6]		= { .name = "LDO_REG6" },
-	[RK808_ID_LDO7]		= { .name = "LDO_REG7" },
-	[RK808_ID_LDO8]		= { .name = "LDO_REG8" },
-	[RK808_ID_SWITCH1]	= { .name = "SWITCH_REG1" },
-	[RK808_ID_SWITCH2]	= { .name = "SWITCH_REG2" },
+	RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
+		RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(3), 400),
+	RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
+		RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(4), 400),
+	RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
+		RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(5), 400),
+	RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+		RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(6), 400),
+	RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
+		RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(7), 400),
+	RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
+		RK808_DCDC_EN_REG, BIT(5)),
+	RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
+		RK808_DCDC_EN_REG, BIT(6)),
 };
 
 static int rk808_regulator_dt_parse_pdata(struct device *dev,
@@ -529,17 +460,12 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
 				   struct rk808_regulator_data *pdata)
 {
 	struct device_node *np;
-	int tmp, ret, i;
+	int tmp, ret = 0, i;
 
 	np = of_get_child_by_name(client_dev->of_node, "regulators");
 	if (!np)
 		return -ENXIO;
 
-	ret = of_regulator_match(dev, np, rk808_reg_matches,
-				 RK808_NUM_REGULATORS);
-	if (ret < 0)
-		goto dt_parse_end;
-
 	for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
 		pdata->dvs_gpio[i] =
 			devm_gpiod_get_index_optional(client_dev, "dvs", i,
@@ -586,18 +512,12 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, pdata);
 
+	config.dev = &client->dev;
+	config.driver_data = pdata;
+	config.regmap = rk808->regmap;
+
 	/* Instantiate the regulators */
 	for (i = 0; i < RK808_NUM_REGULATORS; i++) {
-		if (!rk808_reg_matches[i].init_data ||
-		    !rk808_reg_matches[i].of_node)
-			continue;
-
-		config.dev = &client->dev;
-		config.driver_data = pdata;
-		config.regmap = rk808->regmap;
-		config.of_node = rk808_reg_matches[i].of_node;
-		config.init_data = rk808_reg_matches[i].init_data;
-
 		rk808_rdev = devm_regulator_register(&pdev->dev,
 						     &rk808_reg[i], &config);
 		if (IS_ERR(rk808_rdev)) {
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 6dfa3502e..02fb6b4ea 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -267,6 +267,7 @@ static struct regulator_ops s2mps11_buck_ops = {
 	.ops		= &s2mps11_ldo_ops,		\
 	.type		= REGULATOR_VOLTAGE,		\
 	.owner		= THIS_MODULE,			\
+	.ramp_delay	= RAMP_DELAY_12_MVUS,		\
 	.min_uV		= MIN_800_MV,			\
 	.uV_step	= step,				\
 	.n_voltages	= S2MPS11_LDO_N_VOLTAGES,	\
@@ -1237,17 +1238,7 @@ static struct platform_driver s2mps11_pmic_driver = {
 	.id_table = s2mps11_pmic_id,
 };
 
-static int __init s2mps11_pmic_init(void)
-{
-	return platform_driver_register(&s2mps11_pmic_driver);
-}
-subsys_initcall(s2mps11_pmic_init);
-
-static void __exit s2mps11_pmic_exit(void)
-{
-	platform_driver_unregister(&s2mps11_pmic_driver);
-}
-module_exit(s2mps11_pmic_exit);
+module_platform_driver(s2mps11_pmic_driver);
 
 /* Module information */
 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c
index 572816e30..c139890c1 100644
--- a/drivers/regulator/tps51632-regulator.c
+++ b/drivers/regulator/tps51632-regulator.c
@@ -94,11 +94,14 @@ static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev,
 		int ramp_delay)
 {
 	struct tps51632_chip *tps = rdev_get_drvdata(rdev);
-	int bit = ramp_delay/6000;
+	int bit;
 	int ret;
 
-	if (bit)
-		bit--;
+	if (ramp_delay == 0)
+		bit = 0;
+	else
+		bit = DIV_ROUND_UP(ramp_delay, 6000) - 1;
+
 	ret = regmap_write(tps->regmap, TPS51632_SLEW_REGS, BIT(bit));
 	if (ret < 0)
 		dev_err(tps->dev, "SLEW reg write failed, err %d\n", ret);
diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c
index 9d6ea3a4d..67cac2682 100644
--- a/drivers/regulator/tps6524x-regulator.c
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -600,7 +600,7 @@ static int pmic_probe(struct spi_device *spi)
 
 	memset(hw, 0, sizeof(struct tps6524x));
 	hw->dev = dev;
-	hw->spi = spi_dev_get(spi);
+	hw->spi = spi;
 	mutex_init(&hw->lock);
 
 	for (i = 0; i < N_REGULATORS; i++, info++, init_data++) {
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 955a6fb13..faeb5ee92 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -21,7 +21,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/i2c/twl.h>
-
+#include <linux/delay.h>
 
 /*
  * The TWL4030/TW5030/TPS659x0/TWL6030 family chips include power management, a
@@ -188,6 +188,74 @@ static int twl6030reg_is_enabled(struct regulator_dev *rdev)
 	return grp && (val == TWL6030_CFG_STATE_ON);
 }
 
+#define PB_I2C_BUSY	BIT(0)
+#define PB_I2C_BWEN	BIT(1)
+
+/* Wait until buffer empty/ready to send a word on power bus. */
+static int twl4030_wait_pb_ready(void)
+{
+
+	int	ret;
+	int	timeout = 10;
+	u8	val;
+
+	do {
+		ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val,
+				      TWL4030_PM_MASTER_PB_CFG);
+		if (ret < 0)
+			return ret;
+
+		if (!(val & PB_I2C_BUSY))
+			return 0;
+
+		mdelay(1);
+		timeout--;
+	} while (timeout);
+
+	return -ETIMEDOUT;
+}
+
+/* Send a word over the powerbus */
+static int twl4030_send_pb_msg(unsigned msg)
+{
+	u8	val;
+	int	ret;
+
+	/* save powerbus configuration */
+	ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val,
+			      TWL4030_PM_MASTER_PB_CFG);
+	if (ret < 0)
+		return ret;
+
+	/* Enable i2c access to powerbus */
+	ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val | PB_I2C_BWEN,
+			       TWL4030_PM_MASTER_PB_CFG);
+	if (ret < 0)
+		return ret;
+
+	ret = twl4030_wait_pb_ready();
+	if (ret < 0)
+		return ret;
+
+	ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg >> 8,
+			       TWL4030_PM_MASTER_PB_WORD_MSB);
+	if (ret < 0)
+		return ret;
+
+	ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg & 0xff,
+			       TWL4030_PM_MASTER_PB_WORD_LSB);
+	if (ret < 0)
+		return ret;
+
+	ret = twl4030_wait_pb_ready();
+	if (ret < 0)
+		return ret;
+
+	/* Restore powerbus configuration */
+	return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val,
+				TWL4030_PM_MASTER_PB_CFG);
+}
+
 static int twl4030reg_enable(struct regulator_dev *rdev)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
@@ -303,7 +371,6 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 	unsigned		message;
-	int			status;
 
 	/* We can only set the mode through state machine commands... */
 	switch (mode) {
@@ -317,20 +384,19 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
 		return -EINVAL;
 	}
 
-	/* Ensure the resource is associated with some group */
-	status = twlreg_grp(rdev);
-	if (status < 0)
-		return status;
-	if (!(status & (P3_GRP_4030 | P2_GRP_4030 | P1_GRP_4030)))
-		return -EACCES;
-
-	status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
-			message >> 8, TWL4030_PM_MASTER_PB_WORD_MSB);
-	if (status < 0)
-		return status;
+	return twl4030_send_pb_msg(message);
+}
 
-	return twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
-			message & 0xff, TWL4030_PM_MASTER_PB_WORD_LSB);
+static inline unsigned int twl4030reg_map_mode(unsigned int mode)
+{
+	switch (mode) {
+	case RES_STATE_ACTIVE:
+		return REGULATOR_MODE_NORMAL;
+	case RES_STATE_SLEEP:
+		return REGULATOR_MODE_STANDBY;
+	default:
+		return -EINVAL;
+	}
 }
 
 static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
@@ -835,10 +901,11 @@ static struct regulator_ops twlsmps_ops = {
 #define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
 			remap_conf) \
 		TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
-			remap_conf, TWL4030, twl4030fixed_ops)
+			remap_conf, TWL4030, twl4030fixed_ops, \
+			twl4030reg_map_mode)
 #define TWL6030_FIXED_LDO(label, offset, mVolts, turnon_delay) \
 		TWL_FIXED_LDO(label, offset, mVolts, 0x0, turnon_delay, \
-			0x0, TWL6030, twl6030fixed_ops)
+			0x0, TWL6030, twl6030fixed_ops, 0x0)
 
 #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
 static const struct twlreg_info TWL4030_INFO_##label = { \
@@ -855,6 +922,7 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
 		.type = REGULATOR_VOLTAGE, \
 		.owner = THIS_MODULE, \
 		.enable_time = turnon_delay, \
+		.of_map_mode = twl4030reg_map_mode, \
 		}, \
 	}
 
@@ -870,6 +938,7 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
 		.type = REGULATOR_VOLTAGE, \
 		.owner = THIS_MODULE, \
 		.enable_time = turnon_delay, \
+		.of_map_mode = twl4030reg_map_mode, \
 		}, \
 	}
 
@@ -915,7 +984,7 @@ static const struct twlreg_info TWL6032_INFO_##label = { \
 	}
 
 #define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \
-		family, operations) \
+		family, operations, map_mode) \
 static const struct twlreg_info TWLFIXED_INFO_##label = { \
 	.base = offset, \
 	.id = num, \
@@ -930,6 +999,7 @@ static const struct twlreg_info TWLFIXED_INFO_##label = { \
 		.owner = THIS_MODULE, \
 		.min_uV = mVolts * 1000, \
 		.enable_time = turnon_delay, \
+		.of_map_mode = map_mode, \
 		}, \
 	}