Initial import

1 files changed, 1302 insertions, 0 deletions

diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
new file mode 100644
index 000000000..b53ec2f1e
--- /dev/null
+++ b/drivers/scsi/BusLogic.h
@@ -0,0 +1,1302 @@
+/*
+
+  Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
+
+  Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
+
+  This program is free software; you may redistribute and/or modify it under
+  the terms of the GNU General Public License Version 2 as published by the
+  Free Software Foundation.
+
+  This program is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
+  or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+  for complete details.
+
+  The author respectfully requests that any modifications to this software be
+  sent directly to him for evaluation and testing.
+
+  Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
+  advice has been invaluable, to David Gentzel, for writing the original Linux
+  BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
+
+  Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
+  Manager available as freely redistributable source code.
+
+*/
+
+#ifndef _BUSLOGIC_H
+#define _BUSLOGIC_H
+
+
+#ifndef PACKED
+#define PACKED __attribute__((packed))
+#endif
+
+/*
+  Define the maximum number of BusLogic Host Adapters supported by this driver.
+*/
+
+#define BLOGIC_MAX_ADAPTERS		16
+
+
+/*
+  Define the maximum number of Target Devices supported by this driver.
+*/
+
+#define BLOGIC_MAXDEV			16
+
+
+/*
+  Define the maximum number of Scatter/Gather Segments used by this driver.
+  For optimal performance, it is important that this limit be at least as
+  large as the largest single request generated by the I/O Subsystem.
+*/
+
+#define BLOGIC_SG_LIMIT		128
+
+
+/*
+  Define the maximum, maximum automatic, minimum automatic, and default Queue
+  Depth to allow for Target Devices depending on whether or not they support
+  Tagged Queuing and whether or not ISA Bounce Buffers are required.
+*/
+
+#define BLOGIC_MAX_TAG_DEPTH		64
+#define BLOGIC_MAX_AUTO_TAG_DEPTH	28
+#define BLOGIC_MIN_AUTO_TAG_DEPTH	7
+#define BLOGIC_TAG_DEPTH_BB		3
+#define BLOGIC_UNTAG_DEPTH		3
+#define BLOGIC_UNTAG_DEPTH_BB		2
+
+
+/*
+  Define the default amount of time in seconds to wait between a Host Adapter
+  Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI commands.
+  Some SCSI devices get confused if they receive SCSI commands too soon after
+  a SCSI Bus Reset.
+*/
+
+#define BLOGIC_BUS_SETTLE_TIME		2
+
+
+/*
+  Define the maximum number of Mailboxes that should be used for MultiMaster
+  Host Adapters.  This number is chosen to be larger than the maximum Host
+  Adapter Queue Depth and small enough so that the Host Adapter structure
+  does not cross an allocation block size boundary.
+*/
+
+#define BLOGIC_MAX_MAILBOX		211
+
+
+/*
+  Define the number of CCBs that should be allocated as a group to optimize
+  Kernel memory allocation.
+*/
+
+#define BLOGIC_CCB_GRP_ALLOCSIZE	7
+
+
+/*
+  Define the Host Adapter Line and Message Buffer Sizes.
+*/
+
+#define BLOGIC_LINEBUF_SIZE		100
+#define BLOGIC_MSGBUF_SIZE		9700
+
+
+/*
+  Define the Driver Message Levels.
+*/
+
+enum blogic_msglevel {
+	BLOGIC_ANNOUNCE_LEVEL = 0,
+	BLOGIC_INFO_LEVEL = 1,
+	BLOGIC_NOTICE_LEVEL = 2,
+	BLOGIC_WARN_LEVEL = 3,
+	BLOGIC_ERR_LEVEL = 4
+};
+
+static char *blogic_msglevelmap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, KERN_ERR };
+
+
+/*
+  Define Driver Message macros.
+*/
+
+#define blogic_announce(format, args...) \
+	blogic_msg(BLOGIC_ANNOUNCE_LEVEL, format, ##args)
+
+#define blogic_info(format, args...) \
+	blogic_msg(BLOGIC_INFO_LEVEL, format, ##args)
+
+#define blogic_notice(format, args...) \
+	blogic_msg(BLOGIC_NOTICE_LEVEL, format, ##args)
+
+#define blogic_warn(format, args...) \
+	blogic_msg(BLOGIC_WARN_LEVEL, format, ##args)
+
+#define blogic_err(format, args...) \
+	blogic_msg(BLOGIC_ERR_LEVEL, format, ##args)
+
+
+/*
+  Define the types of BusLogic Host Adapters that are supported and the number
+  of I/O Addresses required by each type.
+*/
+
+enum blogic_adapter_type {
+	BLOGIC_MULTIMASTER = 1,
+	BLOGIC_FLASHPOINT = 2
+} PACKED;
+
+#define BLOGIC_MULTIMASTER_ADDR_COUNT	4
+#define BLOGIC_FLASHPOINT_ADDR_COUNT	256
+
+static int blogic_adapter_addr_count[3] = { 0, BLOGIC_MULTIMASTER_ADDR_COUNT, BLOGIC_FLASHPOINT_ADDR_COUNT };
+
+
+/*
+  Define macros for testing the Host Adapter Type.
+*/
+
+#ifdef CONFIG_SCSI_FLASHPOINT
+
+#define blogic_multimaster_type(adapter) \
+	(adapter->adapter_type == BLOGIC_MULTIMASTER)
+
+#define blogic_flashpoint_type(adapter) \
+	(adapter->adapter_type == BLOGIC_FLASHPOINT)
+
+#else
+
+#define blogic_multimaster_type(adapter)	(true)
+#define blogic_flashpoint_type(adapter)		(false)
+
+#endif
+
+
+/*
+  Define the possible Host Adapter Bus Types.
+*/
+
+enum blogic_adapter_bus_type {
+	BLOGIC_UNKNOWN_BUS = 0,
+	BLOGIC_ISA_BUS = 1,
+	BLOGIC_EISA_BUS = 2,
+	BLOGIC_PCI_BUS = 3,
+	BLOGIC_VESA_BUS = 4,
+	BLOGIC_MCA_BUS = 5
+} PACKED;
+
+static char *blogic_adapter_busnames[] = { "Unknown", "ISA", "EISA", "PCI", "VESA", "MCA" };
+
+static enum blogic_adapter_bus_type blogic_adater_bus_types[] = {
+	BLOGIC_VESA_BUS,	/* BT-4xx */
+	BLOGIC_ISA_BUS,		/* BT-5xx */
+	BLOGIC_MCA_BUS,		/* BT-6xx */
+	BLOGIC_EISA_BUS,	/* BT-7xx */
+	BLOGIC_UNKNOWN_BUS,	/* BT-8xx */
+	BLOGIC_PCI_BUS		/* BT-9xx */
+};
+
+/*
+  Define the possible Host Adapter BIOS Disk Geometry Translations.
+*/
+
+enum blogic_bios_diskgeometry {
+	BLOGIC_BIOS_NODISK = 0,
+	BLOGIC_BIOS_DISK64x32 = 1,
+	BLOGIC_BIOS_DISK128x32 = 2,
+	BLOGIC_BIOS_DISK255x63 = 3
+} PACKED;
+
+
+/*
+  Define a 10^18 Statistics Byte Counter data type.
+*/
+
+struct blogic_byte_count {
+	unsigned int units;
+	unsigned int billions;
+};
+
+
+/*
+  Define the structure for I/O Address and Bus Probing Information.
+*/
+
+struct blogic_probeinfo {
+	enum blogic_adapter_type adapter_type;
+	enum blogic_adapter_bus_type adapter_bus_type;
+	unsigned long io_addr;
+	unsigned long pci_addr;
+	struct pci_dev *pci_device;
+	unsigned char bus;
+	unsigned char dev;
+	unsigned char irq_ch;
+};
+
+/*
+  Define the Probe Options.
+*/
+
+struct blogic_probe_options {
+	bool noprobe:1;			/* Bit 0 */
+	bool noprobe_isa:1;		/* Bit 1 */
+	bool noprobe_pci:1;		/* Bit 2 */
+	bool nosort_pci:1;		/* Bit 3 */
+	bool multimaster_first:1;	/* Bit 4 */
+	bool flashpoint_first:1;	/* Bit 5 */
+	bool limited_isa:1;		/* Bit 6 */
+	bool probe330:1;		/* Bit 7 */
+	bool probe334:1;		/* Bit 8 */
+	bool probe230:1;		/* Bit 9 */
+	bool probe234:1;		/* Bit 10 */
+	bool probe130:1;		/* Bit 11 */
+	bool probe134:1;		/* Bit 12 */
+};
+
+/*
+  Define the Global Options.
+*/
+
+struct blogic_global_options {
+	bool trace_probe:1;	/* Bit 0 */
+	bool trace_hw_reset:1;	/* Bit 1 */
+	bool trace_config:1;	/* Bit 2 */
+	bool trace_err:1;	/* Bit 3 */
+};
+
+/*
+  Define the BusLogic SCSI Host Adapter I/O Register Offsets.
+*/
+
+#define BLOGIC_CNTRL_REG	0	/* WO register */
+#define BLOGIC_STATUS_REG	0	/* RO register */
+#define BLOGIC_CMD_PARM_REG	1	/* WO register */
+#define BLOGIC_DATAIN_REG	1	/* RO register */
+#define BLOGIC_INT_REG		2	/* RO register */
+#define BLOGIC_GEOMETRY_REG	3	/* RO register */
+
+/*
+  Define the structure of the write-only Control Register.
+*/
+
+union blogic_cntrl_reg {
+	unsigned char all;
+	struct {
+		unsigned char:4;	/* Bits 0-3 */
+		bool bus_reset:1;	/* Bit 4 */
+		bool int_reset:1;	/* Bit 5 */
+		bool soft_reset:1;	/* Bit 6 */
+		bool hard_reset:1;	/* Bit 7 */
+	} cr;
+};
+
+/*
+  Define the structure of the read-only Status Register.
+*/
+
+union blogic_stat_reg {
+	unsigned char all;
+	struct {
+		bool cmd_invalid:1;	/* Bit 0 */
+		bool rsvd:1;		/* Bit 1 */
+		bool datain_ready:1;	/* Bit 2 */
+		bool cmd_param_busy:1;	/* Bit 3 */
+		bool adapter_ready:1;	/* Bit 4 */
+		bool init_reqd:1;	/* Bit 5 */
+		bool diag_failed:1;	/* Bit 6 */
+		bool diag_active:1;	/* Bit 7 */
+	} sr;
+};
+
+/*
+  Define the structure of the read-only Interrupt Register.
+*/
+
+union blogic_int_reg {
+	unsigned char all;
+	struct {
+		bool mailin_loaded:1;	/* Bit 0 */
+		bool mailout_avail:1;	/* Bit 1 */
+		bool cmd_complete:1;	/* Bit 2 */
+		bool ext_busreset:1;	/* Bit 3 */
+		unsigned char rsvd:3;	/* Bits 4-6 */
+		bool int_valid:1;	/* Bit 7 */
+	} ir;
+};
+
+/*
+  Define the structure of the read-only Geometry Register.
+*/
+
+union blogic_geo_reg {
+	unsigned char all;
+	struct {
+		enum blogic_bios_diskgeometry d0_geo:2;	/* Bits 0-1 */
+		enum blogic_bios_diskgeometry d1_geo:2;	/* Bits 2-3 */
+		unsigned char:3;	/* Bits 4-6 */
+		bool ext_trans_enable:1;	/* Bit 7 */
+	} gr;
+};
+
+/*
+  Define the BusLogic SCSI Host Adapter Command Register Operation Codes.
+*/
+
+enum blogic_opcode {
+	BLOGIC_TEST_CMP_COMPLETE = 0x00,
+	BLOGIC_INIT_MBOX = 0x01,
+	BLOGIC_EXEC_MBOX_CMD = 0x02,
+	BLOGIC_EXEC_BIOS_CMD = 0x03,
+	BLOGIC_GET_BOARD_ID = 0x04,
+	BLOGIC_ENABLE_OUTBOX_AVAIL_INT = 0x05,
+	BLOGIC_SET_SELECT_TIMEOUT = 0x06,
+	BLOGIC_SET_PREEMPT_TIME = 0x07,
+	BLOGIC_SET_TIMEOFF_BUS = 0x08,
+	BLOGIC_SET_TXRATE = 0x09,
+	BLOGIC_INQ_DEV0TO7 = 0x0A,
+	BLOGIC_INQ_CONFIG = 0x0B,
+	BLOGIC_TGT_MODE = 0x0C,
+	BLOGIC_INQ_SETUPINFO = 0x0D,
+	BLOGIC_WRITE_LOCALRAM = 0x1A,
+	BLOGIC_READ_LOCALRAM = 0x1B,
+	BLOGIC_WRITE_BUSMASTER_FIFO = 0x1C,
+	BLOGIC_READ_BUSMASTER_FIFO = 0x1D,
+	BLOGIC_ECHO_CMDDATA = 0x1F,
+	BLOGIC_ADAPTER_DIAG = 0x20,
+	BLOGIC_SET_OPTIONS = 0x21,
+	BLOGIC_INQ_DEV8TO15 = 0x23,
+	BLOGIC_INQ_DEV = 0x24,
+	BLOGIC_DISABLE_INT = 0x25,
+	BLOGIC_INIT_EXT_MBOX = 0x81,
+	BLOGIC_EXEC_SCS_CMD = 0x83,
+	BLOGIC_INQ_FWVER_D3 = 0x84,
+	BLOGIC_INQ_FWVER_LETTER = 0x85,
+	BLOGIC_INQ_PCI_INFO = 0x86,
+	BLOGIC_INQ_MODELNO = 0x8B,
+	BLOGIC_INQ_SYNC_PERIOD = 0x8C,
+	BLOGIC_INQ_EXTSETUP = 0x8D,
+	BLOGIC_STRICT_RR = 0x8F,
+	BLOGIC_STORE_LOCALRAM = 0x90,
+	BLOGIC_FETCH_LOCALRAM = 0x91,
+	BLOGIC_STORE_TO_EEPROM = 0x92,
+	BLOGIC_LOAD_AUTOSCSICODE = 0x94,
+	BLOGIC_MOD_IOADDR = 0x95,
+	BLOGIC_SETCCB_FMT = 0x96,
+	BLOGIC_WRITE_INQBUF = 0x9A,
+	BLOGIC_READ_INQBUF = 0x9B,
+	BLOGIC_FLASH_LOAD = 0xA7,
+	BLOGIC_READ_SCAMDATA = 0xA8,
+	BLOGIC_WRITE_SCAMDATA = 0xA9
+};
+
+/*
+  Define the Inquire Board ID reply structure.
+*/
+
+struct blogic_board_id {
+	unsigned char type;		/* Byte 0 */
+	unsigned char custom_features;	/* Byte 1 */
+	unsigned char fw_ver_digit1;	/* Byte 2 */
+	unsigned char fw_ver_digit2;	/* Byte 3 */
+};
+
+/*
+  Define the Inquire Configuration reply structure.
+*/
+
+struct blogic_config {
+	unsigned char:5;	/* Byte 0 Bits 0-4 */
+	bool dma_ch5:1;		/* Byte 0 Bit 5 */
+	bool dma_ch6:1;		/* Byte 0 Bit 6 */
+	bool dma_ch7:1;		/* Byte 0 Bit 7 */
+	bool irq_ch9:1;		/* Byte 1 Bit 0 */
+	bool irq_ch10:1;	/* Byte 1 Bit 1 */
+	bool irq_ch11:1;	/* Byte 1 Bit 2 */
+	bool irq_ch12:1;	/* Byte 1 Bit 3 */
+	unsigned char:1;	/* Byte 1 Bit 4 */
+	bool irq_ch14:1;	/* Byte 1 Bit 5 */
+	bool irq_ch15:1;	/* Byte 1 Bit 6 */
+	unsigned char:1;	/* Byte 1 Bit 7 */
+	unsigned char id:4;	/* Byte 2 Bits 0-3 */
+	unsigned char:4;	/* Byte 2 Bits 4-7 */
+};
+
+/*
+  Define the Inquire Setup Information reply structure.
+*/
+
+struct blogic_syncval {
+	unsigned char offset:4;		/* Bits 0-3 */
+	unsigned char tx_period:3;	/* Bits 4-6 */
+	bool sync:1;			/* Bit 7 */
+};
+
+struct blogic_setup_info {
+	bool sync:1;				/* Byte 0 Bit 0 */
+	bool parity:1;				/* Byte 0 Bit 1 */
+	unsigned char:6;			/* Byte 0 Bits 2-7 */
+	unsigned char tx_rate;			/* Byte 1 */
+	unsigned char preempt_time;		/* Byte 2 */
+	unsigned char timeoff_bus;		/* Byte 3 */
+	unsigned char mbox_count;		/* Byte 4 */
+	unsigned char mbox_addr[3];		/* Bytes 5-7 */
+	struct blogic_syncval sync0to7[8];	/* Bytes 8-15 */
+	unsigned char disconnect_ok0to7;	/* Byte 16 */
+	unsigned char sig;			/* Byte 17 */
+	unsigned char char_d;			/* Byte 18 */
+	unsigned char bus_type;			/* Byte 19 */
+	unsigned char wide_tx_ok0to7;		/* Byte 20 */
+	unsigned char wide_tx_active0to7;	/* Byte 21 */
+	struct blogic_syncval sync8to15[8];	/* Bytes 22-29 */
+	unsigned char disconnect_ok8to15;	/* Byte 30 */
+	unsigned char:8;			/* Byte 31 */
+	unsigned char wide_tx_ok8to15;		/* Byte 32 */
+	unsigned char wide_tx_active8to15;	/* Byte 33 */
+};
+
+/*
+  Define the Initialize Extended Mailbox request structure.
+*/
+
+struct blogic_extmbox_req {
+	unsigned char mbox_count;	/* Byte 0 */
+	u32 base_mbox_addr;		/* Bytes 1-4 */
+} PACKED;
+
+
+/*
+  Define the Inquire PCI Host Adapter Information reply type.  The ISA
+  Compatible I/O Port values are defined here and are also used with
+  the Modify I/O Address command.
+*/
+
+enum blogic_isa_ioport {
+	BLOGIC_IO_330 = 0,
+	BLOGIC_IO_334 = 1,
+	BLOGIC_IO_230 = 2,
+	BLOGIC_IO_234 = 3,
+	BLOGIC_IO_130 = 4,
+	BLOGIC_IO_134 = 5,
+	BLOGIC_IO_DISABLE = 6,
+	BLOGIC_IO_DISABLE2 = 7
+} PACKED;
+
+struct blogic_adapter_info {
+	enum blogic_isa_ioport isa_port;	/* Byte 0 */
+	unsigned char irq_ch;		/* Byte 1 */
+	bool low_term:1;		/* Byte 2 Bit 0 */
+	bool high_term:1;		/* Byte 2 Bit 1 */
+	unsigned char:2;		/* Byte 2 Bits 2-3 */
+	bool JP1:1;			/* Byte 2 Bit 4 */
+	bool JP2:1;			/* Byte 2 Bit 5 */
+	bool JP3:1;			/* Byte 2 Bit 6 */
+	bool genericinfo_valid:1;	/* Byte 2 Bit 7 */
+	unsigned char:8;		/* Byte 3 */
+};
+
+/*
+  Define the Inquire Extended Setup Information reply structure.
+*/
+
+struct blogic_ext_setup {
+	unsigned char bus_type;		/* Byte 0 */
+	unsigned char bios_addr;	/* Byte 1 */
+	unsigned short sg_limit;	/* Bytes 2-3 */
+	unsigned char mbox_count;	/* Byte 4 */
+	u32 base_mbox_addr;		/* Bytes 5-8 */
+	struct {
+		unsigned char:2;	/* Byte 9 Bits 0-1 */
+		bool fast_on_eisa:1;	/* Byte 9 Bit 2 */
+		unsigned char:3;	/* Byte 9 Bits 3-5 */
+		bool level_int:1;	/* Byte 9 Bit 6 */
+		unsigned char:1;	/* Byte 9 Bit 7 */
+	} misc;
+	unsigned char fw_rev[3];	/* Bytes 10-12 */
+	bool wide:1;			/* Byte 13 Bit 0 */
+	bool differential:1;		/* Byte 13 Bit 1 */
+	bool scam:1;			/* Byte 13 Bit 2 */
+	bool ultra:1;			/* Byte 13 Bit 3 */
+	bool smart_term:1;		/* Byte 13 Bit 4 */
+	unsigned char:3;		/* Byte 13 Bits 5-7 */
+} PACKED;
+
+/*
+  Define the Enable Strict Round Robin Mode request type.
+*/
+
+enum blogic_rr_req {
+	BLOGIC_AGGRESSIVE_RR = 0,
+	BLOGIC_STRICT_RR_MODE = 1
+} PACKED;
+
+
+/*
+  Define the Fetch Host Adapter Local RAM request type.
+*/
+
+#define BLOGIC_BIOS_BASE		0
+#define BLOGIC_AUTOSCSI_BASE		64
+
+struct blogic_fetch_localram {
+	unsigned char offset;	/* Byte 0 */
+	unsigned char count;	/* Byte 1 */
+};
+
+/*
+  Define the Host Adapter Local RAM AutoSCSI structure.
+*/
+
+struct blogic_autoscsi {
+	unsigned char factory_sig[2];		/* Bytes 0-1 */
+	unsigned char info_bytes;		/* Byte 2 */
+	unsigned char adapter_type[6];		/* Bytes 3-8 */
+	unsigned char:8;			/* Byte 9 */
+	bool floppy:1;				/* Byte 10 Bit 0 */
+	bool floppy_sec:1;			/* Byte 10 Bit 1 */
+	bool level_int:1;			/* Byte 10 Bit 2 */
+	unsigned char:2;			/* Byte 10 Bits 3-4 */
+	unsigned char systemram_bios:3;		/* Byte 10 Bits 5-7 */
+	unsigned char dma_ch:7;			/* Byte 11 Bits 0-6 */
+	bool dma_autoconf:1;			/* Byte 11 Bit 7 */
+	unsigned char irq_ch:7;			/* Byte 12 Bits 0-6 */
+	bool irq_autoconf:1;			/* Byte 12 Bit 7 */
+	unsigned char dma_tx_rate;		/* Byte 13 */
+	unsigned char scsi_id;			/* Byte 14 */
+	bool low_term:1;			/* Byte 15 Bit 0 */
+	bool parity:1;				/* Byte 15 Bit 1 */
+	bool high_term:1;			/* Byte 15 Bit 2 */
+	bool noisy_cable:1;			/* Byte 15 Bit 3 */
+	bool fast_sync_neg:1;			/* Byte 15 Bit 4 */
+	bool reset_enabled:1;			/* Byte 15 Bit 5 */
+	bool:1;					/* Byte 15 Bit 6 */
+	bool active_negation:1;			/* Byte 15 Bit 7 */
+	unsigned char bus_on_delay;		/* Byte 16 */
+	unsigned char bus_off_delay;		/* Byte 17 */
+	bool bios_enabled:1;			/* Byte 18 Bit 0 */
+	bool int19_redir_enabled:1;		/* Byte 18 Bit 1 */
+	bool ext_trans_enable:1;		/* Byte 18 Bit 2 */
+	bool removable_as_fixed:1;		/* Byte 18 Bit 3 */
+	bool:1;					/* Byte 18 Bit 4 */
+	bool morethan2_drives:1;		/* Byte 18 Bit 5 */
+	bool bios_int:1;			/* Byte 18 Bit 6 */
+	bool floptical:1;			/* Byte 19 Bit 7 */
+	unsigned short dev_enabled;		/* Bytes 19-20 */
+	unsigned short wide_ok;			/* Bytes 21-22 */
+	unsigned short fast_ok;			/* Bytes 23-24 */
+	unsigned short sync_ok;			/* Bytes 25-26 */
+	unsigned short discon_ok;		/* Bytes 27-28 */
+	unsigned short send_start_unit;		/* Bytes 29-30 */
+	unsigned short ignore_bios_scan;	/* Bytes 31-32 */
+	unsigned char pci_int_pin:2;		/* Byte 33 Bits 0-1 */
+	unsigned char adapter_ioport:2;		/* Byte 33 Bits 2-3 */
+	bool strict_rr_enabled:1;		/* Byte 33 Bit 4 */
+	bool vesabus_33mhzplus:1;		/* Byte 33 Bit 5 */
+	bool vesa_burst_write:1;		/* Byte 33 Bit 6 */
+	bool vesa_burst_read:1;			/* Byte 33 Bit 7 */
+	unsigned short ultra_ok;		/* Bytes 34-35 */
+	unsigned int:32;			/* Bytes 36-39 */
+	unsigned char:8;			/* Byte 40 */
+	unsigned char autoscsi_maxlun;		/* Byte 41 */
+	bool:1;					/* Byte 42 Bit 0 */
+	bool scam_dominant:1;			/* Byte 42 Bit 1 */
+	bool scam_enabled:1;			/* Byte 42 Bit 2 */
+	bool scam_lev2:1;			/* Byte 42 Bit 3 */
+	unsigned char:4;			/* Byte 42 Bits 4-7 */
+	bool int13_exten:1;			/* Byte 43 Bit 0 */
+	bool:1;					/* Byte 43 Bit 1 */
+	bool cd_boot:1;				/* Byte 43 Bit 2 */
+	unsigned char:5;			/* Byte 43 Bits 3-7 */
+	unsigned char boot_id:4;		/* Byte 44 Bits 0-3 */
+	unsigned char boot_ch:4;		/* Byte 44 Bits 4-7 */
+	unsigned char force_scan_order:1;	/* Byte 45 Bit 0 */
+	unsigned char:7;			/* Byte 45 Bits 1-7 */
+	unsigned short nontagged_to_alt_ok;	/* Bytes 46-47 */
+	unsigned short reneg_sync_on_check;	/* Bytes 48-49 */
+	unsigned char rsvd[10];			/* Bytes 50-59 */
+	unsigned char manuf_diag[2];		/* Bytes 60-61 */
+	unsigned short cksum;			/* Bytes 62-63 */
+} PACKED;
+
+/*
+  Define the Host Adapter Local RAM Auto SCSI Byte 45 structure.
+*/
+
+struct blogic_autoscsi_byte45 {
+	unsigned char force_scan_order:1;	/* Bit 0 */
+	unsigned char:7;	/* Bits 1-7 */
+};
+
+/*
+  Define the Host Adapter Local RAM BIOS Drive Map Byte structure.
+*/
+
+#define BLOGIC_BIOS_DRVMAP		17
+
+struct blogic_bios_drvmap {
+	unsigned char tgt_idbit3:1;			/* Bit 0 */
+	unsigned char:2;				/* Bits 1-2 */
+	enum blogic_bios_diskgeometry diskgeom:2;	/* Bits 3-4 */
+	unsigned char tgt_id:3;				/* Bits 5-7 */
+};
+
+/*
+  Define the Set CCB Format request type.  Extended LUN Format CCBs are
+  necessary to support more than 8 Logical Units per Target Device.
+*/
+
+enum blogic_setccb_fmt {
+	BLOGIC_LEGACY_LUN_CCB = 0,
+	BLOGIC_EXT_LUN_CCB = 1
+} PACKED;
+
+/*
+  Define the Outgoing Mailbox Action Codes.
+*/
+
+enum blogic_action {
+	BLOGIC_OUTBOX_FREE = 0x00,
+	BLOGIC_MBOX_START = 0x01,
+	BLOGIC_MBOX_ABORT = 0x02
+} PACKED;
+
+
+/*
+  Define the Incoming Mailbox Completion Codes.  The MultiMaster Firmware
+  only uses codes 0 - 4.  The FlashPoint SCCB Manager has no mailboxes, so
+  completion codes are stored in the CCB; it only uses codes 1, 2, 4, and 5.
+*/
+
+enum blogic_cmplt_code {
+	BLOGIC_INBOX_FREE = 0x00,
+	BLOGIC_CMD_COMPLETE_GOOD = 0x01,
+	BLOGIC_CMD_ABORT_BY_HOST = 0x02,
+	BLOGIC_CMD_NOTFOUND = 0x03,
+	BLOGIC_CMD_COMPLETE_ERROR = 0x04,
+	BLOGIC_INVALID_CCB = 0x05
+} PACKED;
+
+/*
+  Define the Command Control Block (CCB) Opcodes.
+*/
+
+enum blogic_ccb_opcode {
+	BLOGIC_INITIATOR_CCB = 0x00,
+	BLOGIC_TGT_CCB = 0x01,
+	BLOGIC_INITIATOR_CCB_SG = 0x02,
+	BLOGIC_INITIATOR_CCBB_RESIDUAL = 0x03,
+	BLOGIC_INITIATOR_CCB_SG_RESIDUAL = 0x04,
+	BLOGIC_BDR = 0x81
+} PACKED;
+
+
+/*
+  Define the CCB Data Direction Codes.
+*/
+
+enum blogic_datadir {
+	BLOGIC_UNCHECKED_TX = 0,
+	BLOGIC_DATAIN_CHECKED = 1,
+	BLOGIC_DATAOUT_CHECKED = 2,
+	BLOGIC_NOTX = 3
+};
+
+
+/*
+  Define the Host Adapter Status Codes.  The MultiMaster Firmware does not
+  return status code 0x0C; it uses 0x12 for both overruns and underruns.
+*/
+
+enum blogic_adapter_status {
+	BLOGIC_CMD_CMPLT_NORMAL = 0x00,
+	BLOGIC_LINK_CMD_CMPLT = 0x0A,
+	BLOGIC_LINK_CMD_CMPLT_FLAG = 0x0B,
+	BLOGIC_DATA_UNDERRUN = 0x0C,
+	BLOGIC_SELECT_TIMEOUT = 0x11,
+	BLOGIC_DATA_OVERRUN = 0x12,
+	BLOGIC_NOEXPECT_BUSFREE = 0x13,
+	BLOGIC_INVALID_BUSPHASE = 0x14,
+	BLOGIC_INVALID_OUTBOX_CODE = 0x15,
+	BLOGIC_INVALID_CMD_CODE = 0x16,
+	BLOGIC_LINKCCB_BADLUN = 0x17,
+	BLOGIC_BAD_CMD_PARAM = 0x1A,
+	BLOGIC_AUTOREQSENSE_FAIL = 0x1B,
+	BLOGIC_TAGQUEUE_REJECT = 0x1C,
+	BLOGIC_BAD_MSG_RCVD = 0x1D,
+	BLOGIC_HW_FAIL = 0x20,
+	BLOGIC_NORESPONSE_TO_ATN = 0x21,
+	BLOGIC_HW_RESET = 0x22,
+	BLOGIC_RST_FROM_OTHERDEV = 0x23,
+	BLOGIC_BAD_RECONNECT = 0x24,
+	BLOGIC_HW_BDR = 0x25,
+	BLOGIC_ABRT_QUEUE = 0x26,
+	BLOGIC_ADAPTER_SW_ERROR = 0x27,
+	BLOGIC_HW_TIMEOUT = 0x30,
+	BLOGIC_PARITY_ERR = 0x34
+} PACKED;
+
+
+/*
+  Define the SCSI Target Device Status Codes.
+*/
+
+enum blogic_tgt_status {
+	BLOGIC_OP_GOOD = 0x00,
+	BLOGIC_CHECKCONDITION = 0x02,
+	BLOGIC_DEVBUSY = 0x08
+} PACKED;
+
+/*
+  Define the Queue Tag Codes.
+*/
+
+enum blogic_queuetag {
+	BLOGIC_SIMPLETAG = 0,
+	BLOGIC_HEADTAG = 1,
+	BLOGIC_ORDEREDTAG = 2,
+	BLOGIC_RSVDTAG = 3
+};
+
+/*
+  Define the SCSI Command Descriptor Block (CDB).
+*/
+
+#define BLOGIC_CDB_MAXLEN			12
+
+
+/*
+  Define the Scatter/Gather Segment structure required by the MultiMaster
+  Firmware Interface and the FlashPoint SCCB Manager.
+*/
+
+struct blogic_sg_seg {
+	u32 segbytes;	/* Bytes 0-3 */
+	u32 segdata;	/* Bytes 4-7 */
+};
+
+/*
+  Define the Driver CCB Status Codes.
+*/
+
+enum blogic_ccb_status {
+	BLOGIC_CCB_FREE = 0,
+	BLOGIC_CCB_ACTIVE = 1,
+	BLOGIC_CCB_COMPLETE = 2,
+	BLOGIC_CCB_RESET = 3
+} PACKED;
+
+
+/*
+  Define the 32 Bit Mode Command Control Block (CCB) structure.  The first 40
+  bytes are defined by and common to both the MultiMaster Firmware and the
+  FlashPoint SCCB Manager.  The next 60 bytes are defined by the FlashPoint
+  SCCB Manager.  The remaining components are defined by the Linux BusLogic
+  Driver.  Extended LUN Format CCBs differ from Legacy LUN Format 32 Bit Mode
+  CCBs only in having the TagEnable and QueueTag fields moved from byte 17 to
+  byte 1, and the Logical Unit field in byte 17 expanded to 6 bits.  In theory,
+  Extended LUN Format CCBs can support up to 64 Logical Units, but in practice
+  many devices will respond improperly to Logical Units between 32 and 63, and
+  the SCSI-2 specification defines Bit 5 as LUNTAR.  Extended LUN Format CCBs
+  are used by recent versions of the MultiMaster Firmware, as well as by the
+  FlashPoint SCCB Manager; the FlashPoint SCCB Manager only supports 32 Logical
+  Units.  Since 64 Logical Units are unlikely to be needed in practice, and
+  since they are problematic for the above reasons, and since limiting them to
+  5 bits simplifies the CCB structure definition, this driver only supports
+  32 Logical Units per Target Device.
+*/
+
+struct blogic_ccb {
+	/*
+	   MultiMaster Firmware and FlashPoint SCCB Manager Common Portion.
+	 */
+	enum blogic_ccb_opcode opcode;			/* Byte 0 */
+	unsigned char:3;				/* Byte 1 Bits 0-2 */
+	enum blogic_datadir datadir:2;			/* Byte 1 Bits 3-4 */
+	bool tag_enable:1;				/* Byte 1 Bit 5 */
+	enum blogic_queuetag queuetag:2;		/* Byte 1 Bits 6-7 */
+	unsigned char cdblen;				/* Byte 2 */
+	unsigned char sense_datalen;			/* Byte 3 */
+	u32 datalen;					/* Bytes 4-7 */
+	void *data;					/* Bytes 8-11 */
+	unsigned char:8;				/* Byte 12 */
+	unsigned char:8;				/* Byte 13 */
+	enum blogic_adapter_status adapter_status;	/* Byte 14 */
+	enum blogic_tgt_status tgt_status;		/* Byte 15 */
+	unsigned char tgt_id;				/* Byte 16 */
+	unsigned char lun:5;				/* Byte 17 Bits 0-4 */
+	bool legacytag_enable:1;			/* Byte 17 Bit 5 */
+	enum blogic_queuetag legacy_tag:2;		/* Byte 17 Bits 6-7 */
+	unsigned char cdb[BLOGIC_CDB_MAXLEN];		/* Bytes 18-29 */
+	unsigned char:8;				/* Byte 30 */
+	unsigned char:8;				/* Byte 31 */
+	u32 rsvd_int;					/* Bytes 32-35 */
+	u32 sensedata;					/* Bytes 36-39 */
+	/*
+	   FlashPoint SCCB Manager Defined Portion.
+	 */
+	void (*callback) (struct blogic_ccb *);		/* Bytes 40-43 */
+	u32 base_addr;					/* Bytes 44-47 */
+	enum blogic_cmplt_code comp_code;		/* Byte 48 */
+#ifdef CONFIG_SCSI_FLASHPOINT
+	unsigned char:8;				/* Byte 49 */
+	u16 os_flags;					/* Bytes 50-51 */
+	unsigned char private[24];			/* Bytes 52-99 */
+	void *rsvd1;
+	void *rsvd2;
+	unsigned char private2[16];
+#endif
+	/*
+	   BusLogic Linux Driver Defined Portion.
+	 */
+	dma_addr_t allocgrp_head;
+	unsigned int allocgrp_size;
+	u32 dma_handle;
+	enum blogic_ccb_status status;
+	unsigned long serial;
+	struct scsi_cmnd *command;
+	struct blogic_adapter *adapter;
+	struct blogic_ccb *next;
+	struct blogic_ccb *next_all;
+	struct blogic_sg_seg sglist[BLOGIC_SG_LIMIT];
+};
+
+/*
+  Define the 32 Bit Mode Outgoing Mailbox structure.
+*/
+
+struct blogic_outbox {
+	u32 ccb;			/* Bytes 0-3 */
+	u32:24;				/* Bytes 4-6 */
+	enum blogic_action action;	/* Byte 7 */
+};
+
+/*
+  Define the 32 Bit Mode Incoming Mailbox structure.
+*/
+
+struct blogic_inbox {
+	u32 ccb;					/* Bytes 0-3 */
+	enum blogic_adapter_status adapter_status;	/* Byte 4 */
+	enum blogic_tgt_status tgt_status;		/* Byte 5 */
+	unsigned char:8;				/* Byte 6 */
+	enum blogic_cmplt_code comp_code;		/* Byte 7 */
+};
+
+
+/*
+  Define the BusLogic Driver Options structure.
+*/
+
+struct blogic_drvr_options {
+	unsigned short tagq_ok;
+	unsigned short tagq_ok_mask;
+	unsigned short bus_settle_time;
+	unsigned short stop_tgt_inquiry;
+	unsigned char common_qdepth;
+	unsigned char qdepth[BLOGIC_MAXDEV];
+};
+
+/*
+  Define the Host Adapter Target Flags structure.
+*/
+
+struct blogic_tgt_flags {
+	bool tgt_exists:1;
+	bool tagq_ok:1;
+	bool wide_ok:1;
+	bool tagq_active:1;
+	bool wide_active:1;
+	bool cmd_good:1;
+	bool tgt_info_in:1;
+};
+
+/*
+  Define the Host Adapter Target Statistics structure.
+*/
+
+#define BLOGIC_SZ_BUCKETS			10
+
+struct blogic_tgt_stats {
+	unsigned int cmds_tried;
+	unsigned int cmds_complete;
+	unsigned int read_cmds;
+	unsigned int write_cmds;
+	struct blogic_byte_count bytesread;
+	struct blogic_byte_count byteswritten;
+	unsigned int read_sz_buckets[BLOGIC_SZ_BUCKETS];
+	unsigned int write_sz_buckets[BLOGIC_SZ_BUCKETS];
+	unsigned short aborts_request;
+	unsigned short aborts_tried;
+	unsigned short aborts_done;
+	unsigned short bdr_request;
+	unsigned short bdr_tried;
+	unsigned short bdr_done;
+	unsigned short adatper_reset_req;
+	unsigned short adapter_reset_attempt;
+	unsigned short adapter_reset_done;
+};
+
+/*
+  Define the FlashPoint Card Handle data type.
+*/
+
+#define FPOINT_BADCARD_HANDLE		0xFFFFFFFFL
+
+
+/*
+  Define the FlashPoint Information structure.  This structure is defined
+  by the FlashPoint SCCB Manager.
+*/
+
+struct fpoint_info {
+	u32 base_addr;				/* Bytes 0-3 */
+	bool present;				/* Byte 4 */
+	unsigned char irq_ch;			/* Byte 5 */
+	unsigned char scsi_id;			/* Byte 6 */
+	unsigned char scsi_lun;			/* Byte 7 */
+	u16 fw_rev;				/* Bytes 8-9 */
+	u16 sync_ok;				/* Bytes 10-11 */
+	u16 fast_ok;				/* Bytes 12-13 */
+	u16 ultra_ok;				/* Bytes 14-15 */
+	u16 discon_ok;				/* Bytes 16-17 */
+	u16 wide_ok;				/* Bytes 18-19 */
+	bool parity:1;				/* Byte 20 Bit 0 */
+	bool wide:1;				/* Byte 20 Bit 1 */
+	bool softreset:1;			/* Byte 20 Bit 2 */
+	bool ext_trans_enable:1;		/* Byte 20 Bit 3 */
+	bool low_term:1;			/* Byte 20 Bit 4 */
+	bool high_term:1;			/* Byte 20 Bit 5 */
+	bool report_underrun:1;			/* Byte 20 Bit 6 */
+	bool scam_enabled:1;			/* Byte 20 Bit 7 */
+	bool scam_lev2:1;			/* Byte 21 Bit 0 */
+	unsigned char:7;			/* Byte 21 Bits 1-7 */
+	unsigned char family;			/* Byte 22 */
+	unsigned char bus_type;			/* Byte 23 */
+	unsigned char model[3];			/* Bytes 24-26 */
+	unsigned char relative_cardnum;		/* Byte 27 */
+	unsigned char rsvd[4];			/* Bytes 28-31 */
+	u32 os_rsvd;				/* Bytes 32-35 */
+	unsigned char translation_info[4];	/* Bytes 36-39 */
+	u32 rsvd2[5];				/* Bytes 40-59 */
+	u32 sec_range;				/* Bytes 60-63 */
+};
+
+/*
+  Define the BusLogic Driver Host Adapter structure.
+*/
+
+struct blogic_adapter {
+	struct Scsi_Host *scsi_host;
+	struct pci_dev *pci_device;
+	enum blogic_adapter_type adapter_type;
+	enum blogic_adapter_bus_type adapter_bus_type;
+	unsigned long io_addr;
+	unsigned long pci_addr;
+	unsigned short addr_count;
+	unsigned char host_no;
+	unsigned char model[9];
+	unsigned char fw_ver[6];
+	unsigned char full_model[18];
+	unsigned char bus;
+	unsigned char dev;
+	unsigned char irq_ch;
+	unsigned char dma_ch;
+	unsigned char scsi_id;
+	bool irq_acquired:1;
+	bool dma_chan_acquired:1;
+	bool ext_trans_enable:1;
+	bool parity:1;
+	bool reset_enabled:1;
+	bool level_int:1;
+	bool wide:1;
+	bool differential:1;
+	bool scam:1;
+	bool ultra:1;
+	bool ext_lun:1;
+	bool terminfo_valid:1;
+	bool low_term:1;
+	bool high_term:1;
+	bool need_bouncebuf:1;
+	bool strict_rr:1;
+	bool scam_enabled:1;
+	bool scam_lev2:1;
+	bool adapter_initd:1;
+	bool adapter_extreset:1;
+	bool adapter_intern_err:1;
+	bool processing_ccbs;
+	volatile bool adapter_cmd_complete;
+	unsigned short adapter_sglimit;
+	unsigned short drvr_sglimit;
+	unsigned short maxdev;
+	unsigned short maxlun;
+	unsigned short mbox_count;
+	unsigned short initccbs;
+	unsigned short inc_ccbs;
+	unsigned short alloc_ccbs;
+	unsigned short drvr_qdepth;
+	unsigned short adapter_qdepth;
+	unsigned short untag_qdepth;
+	unsigned short common_qdepth;
+	unsigned short bus_settle_time;
+	unsigned short sync_ok;
+	unsigned short fast_ok;
+	unsigned short ultra_ok;
+	unsigned short wide_ok;
+	unsigned short discon_ok;
+	unsigned short tagq_ok;
+	unsigned short ext_resets;
+	unsigned short adapter_intern_errors;
+	unsigned short tgt_count;
+	unsigned short msgbuflen;
+	u32 bios_addr;
+	struct blogic_drvr_options *drvr_opts;
+	struct fpoint_info fpinfo;
+	void *cardhandle;
+	struct list_head host_list;
+	struct blogic_ccb *all_ccbs;
+	struct blogic_ccb *free_ccbs;
+	struct blogic_ccb *firstccb;
+	struct blogic_ccb *lastccb;
+	struct blogic_ccb *bdr_pend[BLOGIC_MAXDEV];
+	struct blogic_tgt_flags tgt_flags[BLOGIC_MAXDEV];
+	unsigned char qdepth[BLOGIC_MAXDEV];
+	unsigned char sync_period[BLOGIC_MAXDEV];
+	unsigned char sync_offset[BLOGIC_MAXDEV];
+	unsigned char active_cmds[BLOGIC_MAXDEV];
+	unsigned int cmds_since_rst[BLOGIC_MAXDEV];
+	unsigned long last_seqpoint[BLOGIC_MAXDEV];
+	unsigned long last_resettried[BLOGIC_MAXDEV];
+	unsigned long last_resetdone[BLOGIC_MAXDEV];
+	struct blogic_outbox *first_outbox;
+	struct blogic_outbox *last_outbox;
+	struct blogic_outbox *next_outbox;
+	struct blogic_inbox *first_inbox;
+	struct blogic_inbox *last_inbox;
+	struct blogic_inbox *next_inbox;
+	struct blogic_tgt_stats tgt_stats[BLOGIC_MAXDEV];
+	unsigned char *mbox_space;
+	dma_addr_t mbox_space_handle;
+	unsigned int mbox_sz;
+	unsigned long ccb_offset;
+	char msgbuf[BLOGIC_MSGBUF_SIZE];
+};
+
+/*
+  Define a structure for the BIOS Disk Parameters.
+*/
+
+struct bios_diskparam {
+	int heads;
+	int sectors;
+	int cylinders;
+};
+
+/*
+  Define a structure for the SCSI Inquiry command results.
+*/
+
+struct scsi_inquiry {
+	unsigned char devtype:5;	/* Byte 0 Bits 0-4 */
+	unsigned char dev_qual:3;	/* Byte 0 Bits 5-7 */
+	unsigned char dev_modifier:7;	/* Byte 1 Bits 0-6 */
+	bool rmb:1;			/* Byte 1 Bit 7 */
+	unsigned char ansi_ver:3;	/* Byte 2 Bits 0-2 */
+	unsigned char ecma_ver:3;	/* Byte 2 Bits 3-5 */
+	unsigned char iso_ver:2;	/* Byte 2 Bits 6-7 */
+	unsigned char resp_fmt:4;	/* Byte 3 Bits 0-3 */
+	unsigned char:2;		/* Byte 3 Bits 4-5 */
+	bool TrmIOP:1;			/* Byte 3 Bit 6 */
+	bool AENC:1;			/* Byte 3 Bit 7 */
+	unsigned char addl_len;		/* Byte 4 */
+	unsigned char:8;		/* Byte 5 */
+	unsigned char:8;		/* Byte 6 */
+	bool SftRe:1;			/* Byte 7 Bit 0 */
+	bool CmdQue:1;			/* Byte 7 Bit 1 */
+	bool:1;				/* Byte 7 Bit 2 */
+	bool linked:1;			/* Byte 7 Bit 3 */
+	bool sync:1;			/* Byte 7 Bit 4 */
+	bool WBus16:1;			/* Byte 7 Bit 5 */
+	bool WBus32:1;			/* Byte 7 Bit 6 */
+	bool RelAdr:1;			/* Byte 7 Bit 7 */
+	unsigned char vendor[8];	/* Bytes 8-15 */
+	unsigned char product[16];	/* Bytes 16-31 */
+	unsigned char product_rev[4];	/* Bytes 32-35 */
+};
+
+
+/*
+  Define functions to provide an abstraction for reading and writing the
+  Host Adapter I/O Registers.
+*/
+
+static inline void blogic_busreset(struct blogic_adapter *adapter)
+{
+	union blogic_cntrl_reg cr;
+	cr.all = 0;
+	cr.cr.bus_reset = true;
+	outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
+}
+
+static inline void blogic_intreset(struct blogic_adapter *adapter)
+{
+	union blogic_cntrl_reg cr;
+	cr.all = 0;
+	cr.cr.int_reset = true;
+	outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
+}
+
+static inline void blogic_softreset(struct blogic_adapter *adapter)
+{
+	union blogic_cntrl_reg cr;
+	cr.all = 0;
+	cr.cr.soft_reset = true;
+	outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
+}
+
+static inline void blogic_hardreset(struct blogic_adapter *adapter)
+{
+	union blogic_cntrl_reg cr;
+	cr.all = 0;
+	cr.cr.hard_reset = true;
+	outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
+}
+
+static inline unsigned char blogic_rdstatus(struct blogic_adapter *adapter)
+{
+	return inb(adapter->io_addr + BLOGIC_STATUS_REG);
+}
+
+static inline void blogic_setcmdparam(struct blogic_adapter *adapter,
+					unsigned char value)
+{
+	outb(value, adapter->io_addr + BLOGIC_CMD_PARM_REG);
+}
+
+static inline unsigned char blogic_rddatain(struct blogic_adapter *adapter)
+{
+	return inb(adapter->io_addr + BLOGIC_DATAIN_REG);
+}
+
+static inline unsigned char blogic_rdint(struct blogic_adapter *adapter)
+{
+	return inb(adapter->io_addr + BLOGIC_INT_REG);
+}
+
+static inline unsigned char blogic_rdgeom(struct blogic_adapter *adapter)
+{
+	return inb(adapter->io_addr + BLOGIC_GEOMETRY_REG);
+}
+
+/*
+  blogic_execmbox issues an Execute Mailbox Command, which
+  notifies the Host Adapter that an entry has been made in an Outgoing
+  Mailbox.
+*/
+
+static inline void blogic_execmbox(struct blogic_adapter *adapter)
+{
+	blogic_setcmdparam(adapter, BLOGIC_EXEC_MBOX_CMD);
+}
+
+/*
+  blogic_delay waits for Seconds to elapse.
+*/
+
+static inline void blogic_delay(int seconds)
+{
+	mdelay(1000 * seconds);
+}
+
+/*
+  virt_to_32bit_virt maps between Kernel Virtual Addresses and
+  32 bit Kernel Virtual Addresses.  This avoids compilation warnings
+  on 64 bit architectures.
+*/
+
+static inline u32 virt_to_32bit_virt(void *virt_addr)
+{
+	return (u32) (unsigned long) virt_addr;
+}
+
+/*
+  blogic_inc_count increments counter by 1, stopping at
+  65535 rather than wrapping around to 0.
+*/
+
+static inline void blogic_inc_count(unsigned short *count)
+{
+	if (*count < 65535)
+		(*count)++;
+}
+
+/*
+  blogic_addcount increments Byte Counter by Amount.
+*/
+
+static inline void blogic_addcount(struct blogic_byte_count *bytecount,
+					unsigned int amount)
+{
+	bytecount->units += amount;
+	if (bytecount->units > 999999999) {
+		bytecount->units -= 1000000000;
+		bytecount->billions++;
+	}
+}
+
+/*
+  blogic_incszbucket increments the Bucket for Amount.
+*/
+
+static inline void blogic_incszbucket(unsigned int *cmdsz_buckets,
+					unsigned int amount)
+{
+	int index = 0;
+	if (amount < 8 * 1024) {
+		if (amount < 2 * 1024)
+			index = (amount < 1 * 1024 ? 0 : 1);
+		else
+			index = (amount < 4 * 1024 ? 2 : 3);
+	} else if (amount < 128 * 1024) {
+		if (amount < 32 * 1024)
+			index = (amount < 16 * 1024 ? 4 : 5);
+		else
+			index = (amount < 64 * 1024 ? 6 : 7);
+	} else
+		index = (amount < 256 * 1024 ? 8 : 9);
+	cmdsz_buckets[index]++;
+}
+
+/*
+  Define the version number of the FlashPoint Firmware (SCCB Manager).
+*/
+
+#define FLASHPOINT_FW_VER		"5.02"
+
+/*
+  Define the possible return values from FlashPoint_HandleInterrupt.
+*/
+
+#define FPOINT_NORMAL_INT		0x00
+#define FPOINT_INTERN_ERR		0xFE
+#define FPOINT_EXT_RESET		0xFF
+
+/*
+  Define prototypes for the forward referenced BusLogic Driver
+  Internal Functions.
+*/
+
+static const char *blogic_drvr_info(struct Scsi_Host *);
+static int blogic_qcmd(struct Scsi_Host *h, struct scsi_cmnd *);
+static int blogic_diskparam(struct scsi_device *, struct block_device *, sector_t, int *);
+static int blogic_slaveconfig(struct scsi_device *);
+static void blogic_qcompleted_ccb(struct blogic_ccb *);
+static irqreturn_t blogic_inthandler(int, void *);
+static int blogic_resetadapter(struct blogic_adapter *, bool hard_reset);
+static void blogic_msg(enum blogic_msglevel, char *, struct blogic_adapter *, ...);
+static int __init blogic_setup(char *);
+
+#endif				/* _BUSLOGIC_H */