Initial import

1 files changed, 84 insertions, 0 deletions

diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
new file mode 100644
index 000000000..cfd172a43
--- /dev/null
+++ b/drivers/scsi/arm/Kconfig
@@ -0,0 +1,84 @@
+#
+# SCSI driver configuration for Acorn
+#
+config SCSI_ACORNSCSI_3
+	tristate "Acorn SCSI card (aka30) support"
+	depends on ARCH_ACORN && SCSI
+	select SCSI_SPI_ATTRS
+	help
+	  This enables support for the Acorn SCSI card (aka30). If you have an
+	  Acorn system with one of these, say Y. If unsure, say N.
+
+config SCSI_ACORNSCSI_TAGGED_QUEUE
+	bool "Support SCSI 2 Tagged queueing"
+	depends on SCSI_ACORNSCSI_3
+	help
+	  Say Y here to enable tagged queuing support on the Acorn SCSI card.
+
+	  This is a feature of SCSI-2 which improves performance: the host
+	  adapter can send several SCSI commands to a device's queue even if
+	  previous commands haven't finished yet. Some SCSI devices don't
+	  implement this properly, so the safe answer is N.
+
+config SCSI_ACORNSCSI_SYNC
+	bool "Support SCSI 2 Synchronous Transfers"
+	depends on SCSI_ACORNSCSI_3
+	help
+	  Say Y here to enable synchronous transfer negotiation with all
+	  targets on the Acorn SCSI card.
+
+	  In general, this improves performance; however some SCSI devices
+	  don't implement it properly, so the safe answer is N.
+
+config SCSI_ARXESCSI
+	tristate "ARXE SCSI support"
+	depends on ARCH_ACORN && SCSI
+	help
+	  Around 1991, Arxe Systems Limited released a high density floppy
+	  disc interface for the Acorn Archimedes range, to allow the use of
+	  HD discs from the then new A5000 on earlier models. This interface
+	  was either sold on its own or with an integral SCSI controller.
+	  Technical details on this NCR53c94-based device are available at
+	  <http://www.cryton.demon.co.uk/acornbits/scsi_arxe.html>
+	  Say Y here to compile in support for the SCSI controller.
+
+config SCSI_CUMANA_2
+	tristate "CumanaSCSI II support"
+	depends on ARCH_ACORN && SCSI
+	help
+	  This enables support for the Cumana SCSI II card. If you have an
+	  Acorn system with one of these, say Y. If unsure, say N.
+
+config SCSI_EESOXSCSI
+	tristate "EESOX support"
+	depends on ARCH_ACORN && SCSI
+	help
+	  This enables support for the EESOX SCSI card. If you have an Acorn
+	  system with one of these, say Y, otherwise say N.
+
+config SCSI_POWERTECSCSI
+	tristate "PowerTec support"
+	depends on ARCH_ACORN && SCSI
+	help
+	  This enables support for the Powertec SCSI card on Acorn systems. If
+	  you have one of these, say Y. If unsure, say N.
+
+comment "The following drivers are not fully supported"
+	depends on ARCH_ACORN
+
+config SCSI_CUMANA_1
+	tristate "CumanaSCSI I support"
+	depends on ARCH_ACORN && SCSI
+	select SCSI_SPI_ATTRS
+	help
+	  This enables support for the Cumana SCSI I card. If you have an
+	  Acorn system with one of these, say Y. If unsure, say N.
+
+config SCSI_OAK1
+	tristate "Oak SCSI support"
+	depends on ARCH_ACORN && SCSI
+	select SCSI_SPI_ATTRS
+	help
+	  This enables support for the Oak SCSI card. If you have an Acorn
+	  system with one of these, say Y. If unsure, say N.
+