summaryrefslogtreecommitdiff
path: root/drivers/scsi/arm/Kconfig
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/scsi/arm/Kconfig
Initial import
Diffstat (limited to 'drivers/scsi/arm/Kconfig')
-rw-r--r--drivers/scsi/arm/Kconfig84
1 files changed, 84 insertions, 0 deletions
diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
new file mode 100644
index 000000000..cfd172a43
--- /dev/null
+++ b/drivers/scsi/arm/Kconfig
@@ -0,0 +1,84 @@
+#
+# SCSI driver configuration for Acorn
+#
+config SCSI_ACORNSCSI_3
+ tristate "Acorn SCSI card (aka30) support"
+ depends on ARCH_ACORN && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This enables support for the Acorn SCSI card (aka30). If you have an
+ Acorn system with one of these, say Y. If unsure, say N.
+
+config SCSI_ACORNSCSI_TAGGED_QUEUE
+ bool "Support SCSI 2 Tagged queueing"
+ depends on SCSI_ACORNSCSI_3
+ help
+ Say Y here to enable tagged queuing support on the Acorn SCSI card.
+
+ This is a feature of SCSI-2 which improves performance: the host
+ adapter can send several SCSI commands to a device's queue even if
+ previous commands haven't finished yet. Some SCSI devices don't
+ implement this properly, so the safe answer is N.
+
+config SCSI_ACORNSCSI_SYNC
+ bool "Support SCSI 2 Synchronous Transfers"
+ depends on SCSI_ACORNSCSI_3
+ help
+ Say Y here to enable synchronous transfer negotiation with all
+ targets on the Acorn SCSI card.
+
+ In general, this improves performance; however some SCSI devices
+ don't implement it properly, so the safe answer is N.
+
+config SCSI_ARXESCSI
+ tristate "ARXE SCSI support"
+ depends on ARCH_ACORN && SCSI
+ help
+ Around 1991, Arxe Systems Limited released a high density floppy
+ disc interface for the Acorn Archimedes range, to allow the use of
+ HD discs from the then new A5000 on earlier models. This interface
+ was either sold on its own or with an integral SCSI controller.
+ Technical details on this NCR53c94-based device are available at
+ <http://www.cryton.demon.co.uk/acornbits/scsi_arxe.html>
+ Say Y here to compile in support for the SCSI controller.
+
+config SCSI_CUMANA_2
+ tristate "CumanaSCSI II support"
+ depends on ARCH_ACORN && SCSI
+ help
+ This enables support for the Cumana SCSI II card. If you have an
+ Acorn system with one of these, say Y. If unsure, say N.
+
+config SCSI_EESOXSCSI
+ tristate "EESOX support"
+ depends on ARCH_ACORN && SCSI
+ help
+ This enables support for the EESOX SCSI card. If you have an Acorn
+ system with one of these, say Y, otherwise say N.
+
+config SCSI_POWERTECSCSI
+ tristate "PowerTec support"
+ depends on ARCH_ACORN && SCSI
+ help
+ This enables support for the Powertec SCSI card on Acorn systems. If
+ you have one of these, say Y. If unsure, say N.
+
+comment "The following drivers are not fully supported"
+ depends on ARCH_ACORN
+
+config SCSI_CUMANA_1
+ tristate "CumanaSCSI I support"
+ depends on ARCH_ACORN && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This enables support for the Cumana SCSI I card. If you have an
+ Acorn system with one of these, say Y. If unsure, say N.
+
+config SCSI_OAK1
+ tristate "Oak SCSI support"
+ depends on ARCH_ACORN && SCSI
+ select SCSI_SPI_ATTRS
+ help
+ This enables support for the Oak SCSI card. If you have an Acorn
+ system with one of these, say Y. If unsure, say N.
+