Initial import

1 files changed, 604 insertions, 0 deletions

diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
new file mode 100644
index 000000000..c8b410c24
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -0,0 +1,604 @@
+/* bnx2i.c: QLogic NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2013 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ * Copyright (c) 2014, QLogic Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Previously Maintained by: Eddie Wai (eddie.wai@broadcom.com)
+ * Maintained by: QLogic-Storage-Upstream@qlogic.com
+ */
+
+#include "bnx2i.h"
+
+static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
+static u32 adapter_count;
+
+#define DRV_MODULE_NAME		"bnx2i"
+#define DRV_MODULE_VERSION	"2.7.10.1"
+#define DRV_MODULE_RELDATE	"Jul 16, 2014"
+
+static char version[] =
+		"QLogic NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
+		" v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+
+
+MODULE_AUTHOR("Anil Veerabhadrappa <anilgv@broadcom.com> and "
+	      "Eddie Wai <eddie.wai@broadcom.com>");
+
+MODULE_DESCRIPTION("QLogic NetXtreme II BCM5706/5708/5709/57710/57711/57712"
+		   "/57800/57810/57840 iSCSI Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+static DEFINE_MUTEX(bnx2i_dev_lock);
+
+unsigned int event_coal_min = 24;
+module_param(event_coal_min, int, 0664);
+MODULE_PARM_DESC(event_coal_min, "Event Coalescing Minimum Commands");
+
+unsigned int event_coal_div = 2;
+module_param(event_coal_div, int, 0664);
+MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor");
+
+unsigned int en_tcp_dack = 1;
+module_param(en_tcp_dack, int, 0664);
+MODULE_PARM_DESC(en_tcp_dack, "Enable TCP Delayed ACK");
+
+unsigned int error_mask1 = 0x00;
+module_param(error_mask1, uint, 0664);
+MODULE_PARM_DESC(error_mask1, "Config FW iSCSI Error Mask #1");
+
+unsigned int error_mask2 = 0x00;
+module_param(error_mask2, uint, 0664);
+MODULE_PARM_DESC(error_mask2, "Config FW iSCSI Error Mask #2");
+
+unsigned int sq_size;
+module_param(sq_size, int, 0664);
+MODULE_PARM_DESC(sq_size, "Configure SQ size");
+
+unsigned int rq_size = BNX2I_RQ_WQES_DEFAULT;
+module_param(rq_size, int, 0664);
+MODULE_PARM_DESC(rq_size, "Configure RQ size");
+
+u64 iscsi_error_mask = 0x00;
+
+DEFINE_PER_CPU(struct bnx2i_percpu_s, bnx2i_percpu);
+
+static int bnx2i_cpu_callback(struct notifier_block *nfb,
+			      unsigned long action, void *hcpu);
+/* notification function for CPU hotplug events */
+static struct notifier_block bnx2i_cpu_notifier = {
+	.notifier_call = bnx2i_cpu_callback,
+};
+
+
+/**
+ * bnx2i_identify_device - identifies NetXtreme II device type
+ * @hba: 		Adapter structure pointer
+ * @cnic:		Corresponding cnic device
+ *
+ * This function identifies the NX2 device type and sets appropriate
+ *	queue mailbox register access method, 5709 requires driver to
+ *	access MBOX regs using *bin* mode
+ */
+void bnx2i_identify_device(struct bnx2i_hba *hba, struct cnic_dev *dev)
+{
+	hba->cnic_dev_type = 0;
+	if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+		if (hba->pci_did == PCI_DEVICE_ID_NX2_5706 ||
+		    hba->pci_did == PCI_DEVICE_ID_NX2_5706S) {
+			set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type);
+		} else if (hba->pci_did == PCI_DEVICE_ID_NX2_5708 ||
+		    hba->pci_did == PCI_DEVICE_ID_NX2_5708S) {
+			set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type);
+		} else if (hba->pci_did == PCI_DEVICE_ID_NX2_5709 ||
+		    hba->pci_did == PCI_DEVICE_ID_NX2_5709S) {
+			set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
+			hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
+		}
+	} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
+		set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type);
+	} else {
+		printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n",
+				  hba->pci_did);
+	}
+}
+
+
+/**
+ * get_adapter_list_head - returns head of adapter list
+ */
+struct bnx2i_hba *get_adapter_list_head(void)
+{
+	struct bnx2i_hba *hba = NULL;
+	struct bnx2i_hba *tmp_hba;
+
+	if (!adapter_count)
+		goto hba_not_found;
+
+	mutex_lock(&bnx2i_dev_lock);
+	list_for_each_entry(tmp_hba, &adapter_list, link) {
+		if (tmp_hba->cnic && tmp_hba->cnic->cm_select_dev) {
+			hba = tmp_hba;
+			break;
+		}
+	}
+	mutex_unlock(&bnx2i_dev_lock);
+hba_not_found:
+	return hba;
+}
+
+
+/**
+ * bnx2i_find_hba_for_cnic - maps cnic device instance to bnx2i adapter instance
+ * @cnic:	pointer to cnic device instance
+ *
+ */
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic)
+{
+	struct bnx2i_hba *hba, *temp;
+
+	mutex_lock(&bnx2i_dev_lock);
+	list_for_each_entry_safe(hba, temp, &adapter_list, link) {
+		if (hba->cnic == cnic) {
+			mutex_unlock(&bnx2i_dev_lock);
+			return hba;
+		}
+	}
+	mutex_unlock(&bnx2i_dev_lock);
+	return NULL;
+}
+
+
+/**
+ * bnx2i_start - cnic callback to initialize & start adapter instance
+ * @handle:	transparent handle pointing to adapter structure
+ *
+ * This function maps adapter structure to pcidev structure and initiates
+ *	firmware handshake to enable/initialize on chip iscsi components
+ * 	This bnx2i - cnic interface api callback is issued after following
+ *	2 conditions are met -
+ *	  a) underlying network interface is up (marked by event 'NETDEV_UP'
+ *		from netdev
+ *	  b) bnx2i adapter instance is registered
+ */
+void bnx2i_start(void *handle)
+{
+#define BNX2I_INIT_POLL_TIME	(1000 / HZ)
+	struct bnx2i_hba *hba = handle;
+	int i = HZ;
+
+	/* On some bnx2x devices, it is possible that iSCSI is no
+	 * longer supported after firmware is downloaded.  In that
+	 * case, the iscsi_init_msg will return failure.
+	 */
+
+	bnx2i_send_fw_iscsi_init_msg(hba);
+	while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) &&
+	       !test_bit(ADAPTER_STATE_INIT_FAILED, &hba->adapter_state) && i--)
+		msleep(BNX2I_INIT_POLL_TIME);
+}
+
+
+/**
+ * bnx2i_chip_cleanup - local routine to handle chip cleanup
+ * @hba:	Adapter instance to register
+ *
+ * Driver checks if adapter still has any active connections before
+ *	executing the cleanup process
+ */
+static void bnx2i_chip_cleanup(struct bnx2i_hba *hba)
+{
+	struct bnx2i_endpoint *bnx2i_ep;
+	struct list_head *pos, *tmp;
+
+	if (hba->ofld_conns_active) {
+		/* Stage to force the disconnection
+		 * This is the case where the daemon is either slow or
+		 * not present
+		 */
+		printk(KERN_ALERT "bnx2i: (%s) chip cleanup for %d active "
+			"connections\n", hba->netdev->name,
+			hba->ofld_conns_active);
+		mutex_lock(&hba->net_dev_lock);
+		list_for_each_safe(pos, tmp, &hba->ep_active_list) {
+			bnx2i_ep = list_entry(pos, struct bnx2i_endpoint, link);
+			/* Clean up the chip only */
+			bnx2i_hw_ep_disconnect(bnx2i_ep);
+			bnx2i_ep->cm_sk = NULL;
+		}
+		mutex_unlock(&hba->net_dev_lock);
+	}
+}
+
+
+/**
+ * bnx2i_stop - cnic callback to shutdown adapter instance
+ * @handle:	transparent handle pointing to adapter structure
+ *
+ * driver checks if adapter is already in shutdown mode, if not start
+ *	the shutdown process
+ */
+void bnx2i_stop(void *handle)
+{
+	struct bnx2i_hba *hba = handle;
+	int conns_active;
+	int wait_delay = 1 * HZ;
+
+	/* check if cleanup happened in GOING_DOWN context */
+	if (!test_and_set_bit(ADAPTER_STATE_GOING_DOWN,
+			      &hba->adapter_state)) {
+		iscsi_host_for_each_session(hba->shost,
+					    bnx2i_drop_session);
+		wait_delay = hba->hba_shutdown_tmo;
+	}
+	/* Wait for inflight offload connection tasks to complete before
+	 * proceeding. Forcefully terminate all connection recovery in
+	 * progress at the earliest, either in bind(), send_pdu(LOGIN),
+	 * or conn_start()
+	 */
+	wait_event_interruptible_timeout(hba->eh_wait,
+					 (list_empty(&hba->ep_ofld_list) &&
+					 list_empty(&hba->ep_destroy_list)),
+					 2 * HZ);
+	/* Wait for all endpoints to be torn down, Chip will be reset once
+	 *  control returns to network driver. So it is required to cleanup and
+	 * release all connection resources before returning from this routine.
+	 */
+	while (hba->ofld_conns_active) {
+		conns_active = hba->ofld_conns_active;
+		wait_event_interruptible_timeout(hba->eh_wait,
+				(hba->ofld_conns_active != conns_active),
+				wait_delay);
+		if (hba->ofld_conns_active == conns_active)
+			break;
+	}
+	bnx2i_chip_cleanup(hba);
+
+	/* This flag should be cleared last so that ep_disconnect() gracefully
+	 * cleans up connection context
+	 */
+	clear_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
+	clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+}
+
+
+/**
+ * bnx2i_init_one - initialize an adapter instance and allocate memory resources
+ * @hba:	bnx2i adapter instance
+ * @cnic:	cnic device handle
+ *
+ * Global resource lock is held during critical sections below. This routine is
+ *	called from either cnic_register_driver() or device hot plug context and
+ *	and does majority of device specific initialization
+ */
+static int bnx2i_init_one(struct bnx2i_hba *hba, struct cnic_dev *cnic)
+{
+	int rc;
+
+	mutex_lock(&bnx2i_dev_lock);
+	if (!cnic->max_iscsi_conn) {
+		printk(KERN_ALERT "bnx2i: dev %s does not support "
+			"iSCSI\n", hba->netdev->name);
+		rc = -EOPNOTSUPP;
+		goto out;
+	}
+
+	hba->cnic = cnic;
+	rc = cnic->register_device(cnic, CNIC_ULP_ISCSI, hba);
+	if (!rc) {
+		hba->age++;
+		set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+		list_add_tail(&hba->link, &adapter_list);
+		adapter_count++;
+	} else if (rc == -EBUSY) 	/* duplicate registration */
+		printk(KERN_ALERT "bnx2i, duplicate registration"
+				  "hba=%p, cnic=%p\n", hba, cnic);
+	else if (rc == -EAGAIN)
+		printk(KERN_ERR "bnx2i, driver not registered\n");
+	else if (rc == -EINVAL)
+		printk(KERN_ERR "bnx2i, invalid type %d\n", CNIC_ULP_ISCSI);
+	else
+		printk(KERN_ERR "bnx2i dev reg, unknown error, %d\n", rc);
+
+out:
+	mutex_unlock(&bnx2i_dev_lock);
+
+	return rc;
+}
+
+
+/**
+ * bnx2i_ulp_init - initialize an adapter instance
+ * @dev:	cnic device handle
+ *
+ * Called from cnic_register_driver() context to initialize all enumerated
+ *	cnic devices. This routine allocate adapter structure and other
+ *	device specific resources.
+ */
+void bnx2i_ulp_init(struct cnic_dev *dev)
+{
+	struct bnx2i_hba *hba;
+
+	/* Allocate a HBA structure for this device */
+	hba = bnx2i_alloc_hba(dev);
+	if (!hba) {
+		printk(KERN_ERR "bnx2i init: hba initialization failed\n");
+		return;
+	}
+
+	/* Get PCI related information and update hba struct members */
+	clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+	if (bnx2i_init_one(hba, dev)) {
+		printk(KERN_ERR "bnx2i - hba %p init failed\n", hba);
+		bnx2i_free_hba(hba);
+	}
+}
+
+
+/**
+ * bnx2i_ulp_exit - shuts down adapter instance and frees all resources
+ * @dev:	cnic device handle
+ *
+ */
+void bnx2i_ulp_exit(struct cnic_dev *dev)
+{
+	struct bnx2i_hba *hba;
+
+	hba = bnx2i_find_hba_for_cnic(dev);
+	if (!hba) {
+		printk(KERN_INFO "bnx2i_ulp_exit: hba not "
+				 "found, dev 0x%p\n", dev);
+		return;
+	}
+	mutex_lock(&bnx2i_dev_lock);
+	list_del_init(&hba->link);
+	adapter_count--;
+
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+		hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+		clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+	}
+	mutex_unlock(&bnx2i_dev_lock);
+
+	bnx2i_free_hba(hba);
+}
+
+
+/**
+ * bnx2i_get_stats - Retrieve various statistic from iSCSI offload
+ * @handle:	bnx2i_hba
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ *      retrieve various iSCSI offload related statistics.
+ */
+int bnx2i_get_stats(void *handle)
+{
+	struct bnx2i_hba *hba = handle;
+	struct iscsi_stats_info *stats;
+
+	if (!hba)
+		return -EINVAL;
+
+	stats = (struct iscsi_stats_info *)hba->cnic->stats_addr;
+
+	if (!stats)
+		return -ENOMEM;
+
+	strlcpy(stats->version, DRV_MODULE_VERSION, sizeof(stats->version));
+	memcpy(stats->mac_add1 + 2, hba->cnic->mac_addr, ETH_ALEN);
+
+	stats->max_frame_size = hba->netdev->mtu;
+	stats->txq_size = hba->max_sqes;
+	stats->rxq_size = hba->max_cqes;
+
+	stats->txq_avg_depth = 0;
+	stats->rxq_avg_depth = 0;
+
+	GET_STATS_64(hba, stats, rx_pdus);
+	GET_STATS_64(hba, stats, rx_bytes);
+
+	GET_STATS_64(hba, stats, tx_pdus);
+	GET_STATS_64(hba, stats, tx_bytes);
+
+	return 0;
+}
+
+
+/**
+ * bnx2i_percpu_thread_create - Create a receive thread for an
+ *				online CPU
+ *
+ * @cpu:	cpu index for the online cpu
+ */
+static void bnx2i_percpu_thread_create(unsigned int cpu)
+{
+	struct bnx2i_percpu_s *p;
+	struct task_struct *thread;
+
+	p = &per_cpu(bnx2i_percpu, cpu);
+
+	thread = kthread_create_on_node(bnx2i_percpu_io_thread, (void *)p,
+					cpu_to_node(cpu),
+					"bnx2i_thread/%d", cpu);
+	/* bind thread to the cpu */
+	if (likely(!IS_ERR(thread))) {
+		kthread_bind(thread, cpu);
+		p->iothread = thread;
+		wake_up_process(thread);
+	}
+}
+
+
+static void bnx2i_percpu_thread_destroy(unsigned int cpu)
+{
+	struct bnx2i_percpu_s *p;
+	struct task_struct *thread;
+	struct bnx2i_work *work, *tmp;
+
+	/* Prevent any new work from being queued for this CPU */
+	p = &per_cpu(bnx2i_percpu, cpu);
+	spin_lock_bh(&p->p_work_lock);
+	thread = p->iothread;
+	p->iothread = NULL;
+
+	/* Free all work in the list */
+	list_for_each_entry_safe(work, tmp, &p->work_list, list) {
+		list_del_init(&work->list);
+		bnx2i_process_scsi_cmd_resp(work->session,
+					    work->bnx2i_conn, &work->cqe);
+		kfree(work);
+	}
+
+	spin_unlock_bh(&p->p_work_lock);
+	if (thread)
+		kthread_stop(thread);
+}
+
+
+/**
+ * bnx2i_cpu_callback - Handler for CPU hotplug events
+ *
+ * @nfb:	The callback data block
+ * @action:	The event triggering the callback
+ * @hcpu:	The index of the CPU that the event is for
+ *
+ * This creates or destroys per-CPU data for iSCSI
+ *
+ * Returns NOTIFY_OK always.
+ */
+static int bnx2i_cpu_callback(struct notifier_block *nfb,
+			      unsigned long action, void *hcpu)
+{
+	unsigned cpu = (unsigned long)hcpu;
+
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		printk(KERN_INFO "bnx2i: CPU %x online: Create Rx thread\n",
+			cpu);
+		bnx2i_percpu_thread_create(cpu);
+		break;
+	case CPU_DEAD:
+	case CPU_DEAD_FROZEN:
+		printk(KERN_INFO "CPU %x offline: Remove Rx thread\n", cpu);
+		bnx2i_percpu_thread_destroy(cpu);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+
+/**
+ * bnx2i_mod_init - module init entry point
+ *
+ * initialize any driver wide global data structures such as endpoint pool,
+ *	tcp port manager/queue, sysfs. finally driver will register itself
+ *	with the cnic module
+ */
+static int __init bnx2i_mod_init(void)
+{
+	int err;
+	unsigned cpu = 0;
+	struct bnx2i_percpu_s *p;
+
+	printk(KERN_INFO "%s", version);
+
+	if (sq_size && !is_power_of_2(sq_size))
+		sq_size = roundup_pow_of_two(sq_size);
+
+	mutex_init(&bnx2i_dev_lock);
+
+	bnx2i_scsi_xport_template =
+			iscsi_register_transport(&bnx2i_iscsi_transport);
+	if (!bnx2i_scsi_xport_template) {
+		printk(KERN_ERR "Could not register bnx2i transport.\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = cnic_register_driver(CNIC_ULP_ISCSI, &bnx2i_cnic_cb);
+	if (err) {
+		printk(KERN_ERR "Could not register bnx2i cnic driver.\n");
+		goto unreg_xport;
+	}
+
+	/* Create percpu kernel threads to handle iSCSI I/O completions */
+	for_each_possible_cpu(cpu) {
+		p = &per_cpu(bnx2i_percpu, cpu);
+		INIT_LIST_HEAD(&p->work_list);
+		spin_lock_init(&p->p_work_lock);
+		p->iothread = NULL;
+	}
+
+	cpu_notifier_register_begin();
+
+	for_each_online_cpu(cpu)
+		bnx2i_percpu_thread_create(cpu);
+
+	/* Initialize per CPU interrupt thread */
+	__register_hotcpu_notifier(&bnx2i_cpu_notifier);
+
+	cpu_notifier_register_done();
+
+	return 0;
+
+unreg_xport:
+	iscsi_unregister_transport(&bnx2i_iscsi_transport);
+out:
+	return err;
+}
+
+
+/**
+ * bnx2i_mod_exit - module cleanup/exit entry point
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ *	in this function. Driver will browse through the adapter list, cleans-up
+ *	each instance, unregisters iscsi transport name and finally driver will
+ *	unregister itself with the cnic module
+ */
+static void __exit bnx2i_mod_exit(void)
+{
+	struct bnx2i_hba *hba;
+	unsigned cpu = 0;
+
+	mutex_lock(&bnx2i_dev_lock);
+	while (!list_empty(&adapter_list)) {
+		hba = list_entry(adapter_list.next, struct bnx2i_hba, link);
+		list_del(&hba->link);
+		adapter_count--;
+
+		if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+			bnx2i_chip_cleanup(hba);
+			hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+			clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+		}
+
+		bnx2i_free_hba(hba);
+	}
+	mutex_unlock(&bnx2i_dev_lock);
+
+	cpu_notifier_register_begin();
+
+	for_each_online_cpu(cpu)
+		bnx2i_percpu_thread_destroy(cpu);
+
+	__unregister_hotcpu_notifier(&bnx2i_cpu_notifier);
+
+	cpu_notifier_register_done();
+
+	iscsi_unregister_transport(&bnx2i_iscsi_transport);
+	cnic_unregister_driver(CNIC_ULP_ISCSI);
+}
+
+module_init(bnx2i_mod_init);
+module_exit(bnx2i_mod_exit);