Initial import

1 files changed, 1274 insertions, 0 deletions

diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
new file mode 100644
index 000000000..fa09d4be2
--- /dev/null
+++ b/drivers/scsi/constants.c
@@ -0,0 +1,1274 @@
+/*
+ * ASCII values for a number of symbolic constants, printing functions,
+ * etc.
+ * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422)
+ * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
+ *   by D. Gilbert and aeb (20020609)
+ * Updated to SPC-4 T10/1713-D Rev 36g, D. Gilbert 20130701
+ */
+
+#include <linux/blkdev.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dbg.h>
+
+/* Commands with service actions that change the command name */
+#define THIRD_PARTY_COPY_OUT 0x83
+#define THIRD_PARTY_COPY_IN 0x84
+
+struct sa_name_list {
+	int opcode;
+	const struct value_name_pair *arr;
+	int arr_sz;
+};
+
+struct value_name_pair {
+	int value;
+	const char * name;
+};
+
+static const char * cdb_byte0_names[] = {
+/* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
+/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
+	    "Reassign Blocks",
+/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
+/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
+/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
+	    "Reserve(6)",
+/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
+/* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic",
+/* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
+/* 20-22 */  NULL, NULL, NULL,
+/* 23-28 */ "Read Format Capacities", "Set Window",
+	    "Read Capacity(10)", NULL, NULL, "Read(10)",
+/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
+            "Read updated block",
+/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
+/* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position",
+/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
+	    "Read Defect Data(10)",
+/* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer",
+	    "Read Buffer",
+/* 3d-3f */ "Update Block", "Read Long(10)",  "Write Long(10)",
+/* 40-41 */ "Change Definition", "Write Same(10)",
+/* 42-48 */ "Unmap/Read sub-channel", "Read TOC/PMA/ATIP",
+	    "Read density support", "Play audio(10)", "Get configuration",
+	    "Play audio msf", "Sanitize/Play audio track/index",
+/* 49-4f */ "Play track relative(10)", "Get event status notification",
+            "Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
+            NULL,
+/* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",
+            "Reserve track", "Send OPC info", "Mode Select(10)",
+/* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue",
+            "Mode Sense(10)", "Close track/session",
+/* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
+            "Persistent reserve out",
+/* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+/* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+/* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+/* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, "Extended CDB",
+	    "Variable length",
+/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)",
+	    "Third party copy out", "Third party copy in",
+/* 85-89 */ "ATA command pass through(16)", "Access control in",
+	    "Access control out", "Read(16)", "Compare and Write",
+/* 8a-8f */ "Write(16)", "ORWrite", "Read attributes", "Write attributes",
+            "Write and verify(16)", "Verify(16)",
+/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
+            "Lock/unlock cache(16)", "Write same(16)", NULL,
+/* 95-99 */ NULL, NULL, NULL, NULL, NULL,
+/* 9a-9f */ NULL, NULL, NULL, "Service action bidirectional",
+	    "Service action in(16)", "Service action out(16)",
+/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
+            "Security protocol in", "Maintenance in", "Maintenance out",
+	    "Move medium/play audio(12)",
+/* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
+            "Play track relative(12)",
+/* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
+            "Read DVD structure", "Write and verify(12)",
+/* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
+/* b2-b4 */ "Search data low(12)", "Set limits(12)",
+            "Read element status attached",
+/* b5-b6 */ "Security protocol out", "Send volume tag, set streaming",
+/* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
+/* ba-bc */ "Redundancy group (in), Scan",
+            "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd",
+/* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd",
+            "Volume set (out), Send DVD structure",
+};
+
+static const struct value_name_pair maint_in_arr[] = {
+	{0x5, "Report identifying information"},
+	{0xa, "Report target port groups"},
+	{0xb, "Report aliases"},
+	{0xc, "Report supported operation codes"},
+	{0xd, "Report supported task management functions"},
+	{0xe, "Report priority"},
+	{0xf, "Report timestamp"},
+	{0x10, "Management protocol in"},
+};
+#define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr)
+
+static const struct value_name_pair maint_out_arr[] = {
+	{0x6, "Set identifying information"},
+	{0xa, "Set target port groups"},
+	{0xb, "Change aliases"},
+	{0xc, "Remove I_T nexus"},
+	{0xe, "Set priority"},
+	{0xf, "Set timestamp"},
+	{0x10, "Management protocol out"},
+};
+#define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr)
+
+static const struct value_name_pair serv_in12_arr[] = {
+	{0x1, "Read media serial number"},
+};
+#define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr)
+
+static const struct value_name_pair serv_out12_arr[] = {
+	{-1, "dummy entry"},
+};
+#define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr)
+
+static const struct value_name_pair serv_bidi_arr[] = {
+	{-1, "dummy entry"},
+};
+#define SERV_BIDI_SZ ARRAY_SIZE(serv_bidi_arr)
+
+static const struct value_name_pair serv_in16_arr[] = {
+	{0x10, "Read capacity(16)"},
+	{0x11, "Read long(16)"},
+	{0x12, "Get LBA status"},
+	{0x13, "Report referrals"},
+};
+#define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr)
+
+static const struct value_name_pair serv_out16_arr[] = {
+	{0x11, "Write long(16)"},
+	{0x1f, "Notify data transfer device(16)"},
+};
+#define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr)
+
+static const struct value_name_pair pr_in_arr[] = {
+	{0x0, "Persistent reserve in, read keys"},
+	{0x1, "Persistent reserve in, read reservation"},
+	{0x2, "Persistent reserve in, report capabilities"},
+	{0x3, "Persistent reserve in, read full status"},
+};
+#define PR_IN_SZ ARRAY_SIZE(pr_in_arr)
+
+static const struct value_name_pair pr_out_arr[] = {
+	{0x0, "Persistent reserve out, register"},
+	{0x1, "Persistent reserve out, reserve"},
+	{0x2, "Persistent reserve out, release"},
+	{0x3, "Persistent reserve out, clear"},
+	{0x4, "Persistent reserve out, preempt"},
+	{0x5, "Persistent reserve out, preempt and abort"},
+	{0x6, "Persistent reserve out, register and ignore existing key"},
+	{0x7, "Persistent reserve out, register and move"},
+};
+#define PR_OUT_SZ ARRAY_SIZE(pr_out_arr)
+
+/* SPC-4 rev 34 renamed the Extended Copy opcode to Third Party Copy Out.
+   LID1 (List Identifier length: 1 byte) is the Extended Copy found in SPC-2
+   and SPC-3 */
+static const struct value_name_pair tpc_out_arr[] = {
+	{0x0, "Extended copy(LID1)"},
+	{0x1, "Extended copy(LID4)"},
+	{0x10, "Populate token"},
+	{0x11, "Write using token"},
+	{0x1c, "Copy operation abort"},
+};
+#define TPC_OUT_SZ ARRAY_SIZE(tpc_out_arr)
+
+static const struct value_name_pair tpc_in_arr[] = {
+	{0x0, "Receive copy status(LID1)"},
+	{0x1, "Receive copy data(LID1)"},
+	{0x3, "Receive copy operating parameters"},
+	{0x4, "Receive copy failure details(LID1)"},
+	{0x5, "Receive copy status(LID4)"},
+	{0x6, "Receive copy data(LID4)"},
+	{0x7, "Receive ROD token information"},
+	{0x8, "Report all ROD tokens"},
+};
+#define TPC_IN_SZ ARRAY_SIZE(tpc_in_arr)
+
+
+static const struct value_name_pair variable_length_arr[] = {
+	{0x1, "Rebuild(32)"},
+	{0x2, "Regenerate(32)"},
+	{0x3, "Xdread(32)"},
+	{0x4, "Xdwrite(32)"},
+	{0x5, "Xdwrite extended(32)"},
+	{0x6, "Xpwrite(32)"},
+	{0x7, "Xdwriteread(32)"},
+	{0x8, "Xdwrite extended(64)"},
+	{0x9, "Read(32)"},
+	{0xa, "Verify(32)"},
+	{0xb, "Write(32)"},
+	{0xc, "Write an verify(32)"},
+	{0xd, "Write same(32)"},
+	{0x8801, "Format OSD"},
+	{0x8802, "Create (osd)"},
+	{0x8803, "List (osd)"},
+	{0x8805, "Read (osd)"},
+	{0x8806, "Write (osd)"},
+	{0x8807, "Append (osd)"},
+	{0x8808, "Flush (osd)"},
+	{0x880a, "Remove (osd)"},
+	{0x880b, "Create partition (osd)"},
+	{0x880c, "Remove partition (osd)"},
+	{0x880e, "Get attributes (osd)"},
+	{0x880f, "Set attributes (osd)"},
+	{0x8812, "Create and write (osd)"},
+	{0x8815, "Create collection (osd)"},
+	{0x8816, "Remove collection (osd)"},
+	{0x8817, "List collection (osd)"},
+	{0x8818, "Set key (osd)"},
+	{0x8819, "Set master key (osd)"},
+	{0x881a, "Flush collection (osd)"},
+	{0x881b, "Flush partition (osd)"},
+	{0x881c, "Flush OSD"},
+	{0x8f7e, "Perform SCSI command (osd)"},
+	{0x8f7f, "Perform task management function (osd)"},
+};
+#define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr)
+
+static struct sa_name_list sa_names_arr[] = {
+	{VARIABLE_LENGTH_CMD, variable_length_arr, VARIABLE_LENGTH_SZ},
+	{MAINTENANCE_IN, maint_in_arr, MAINT_IN_SZ},
+	{MAINTENANCE_OUT, maint_out_arr, MAINT_OUT_SZ},
+	{PERSISTENT_RESERVE_IN, pr_in_arr, PR_IN_SZ},
+	{PERSISTENT_RESERVE_OUT, pr_out_arr, PR_OUT_SZ},
+	{SERVICE_ACTION_IN_12, serv_in12_arr, SERV_IN12_SZ},
+	{SERVICE_ACTION_OUT_12, serv_out12_arr, SERV_OUT12_SZ},
+	{SERVICE_ACTION_BIDIRECTIONAL, serv_bidi_arr, SERV_BIDI_SZ},
+	{SERVICE_ACTION_IN_16, serv_in16_arr, SERV_IN16_SZ},
+	{SERVICE_ACTION_OUT_16, serv_out16_arr, SERV_OUT16_SZ},
+	{THIRD_PARTY_COPY_IN, tpc_in_arr, TPC_IN_SZ},
+	{THIRD_PARTY_COPY_OUT, tpc_out_arr, TPC_OUT_SZ},
+	{0, NULL, 0},
+};
+
+bool scsi_opcode_sa_name(int opcode, int service_action,
+			 const char **cdb_name, const char **sa_name)
+{
+	struct sa_name_list *sa_name_ptr;
+	const struct value_name_pair *arr = NULL;
+	int arr_sz, k;
+
+	*cdb_name = NULL;
+	if (opcode >= VENDOR_SPECIFIC_CDB)
+		return false;
+
+	if (opcode < ARRAY_SIZE(cdb_byte0_names))
+		*cdb_name = cdb_byte0_names[opcode];
+
+	for (sa_name_ptr = sa_names_arr; sa_name_ptr->arr; ++sa_name_ptr) {
+		if (sa_name_ptr->opcode == opcode) {
+			arr = sa_name_ptr->arr;
+			arr_sz = sa_name_ptr->arr_sz;
+			break;
+		}
+	}
+	if (!arr)
+		return false;
+
+	for (k = 0; k < arr_sz; ++k, ++arr) {
+		if (service_action == arr->value)
+			break;
+	}
+	if (k < arr_sz)
+		*sa_name = arr->name;
+
+	return true;
+}
+
+struct error_info {
+	unsigned short code12;	/* 0x0302 looks better than 0x03,0x02 */
+	const char * text;
+};
+
+/*
+ * The canonical list of T10 Additional Sense Codes is available at:
+ * http://www.t10.org/lists/asc-num.txt [most recent: 20141221]
+ */
+
+static const struct error_info additional[] =
+{
+	{0x0000, "No additional sense information"},
+	{0x0001, "Filemark detected"},
+	{0x0002, "End-of-partition/medium detected"},
+	{0x0003, "Setmark detected"},
+	{0x0004, "Beginning-of-partition/medium detected"},
+	{0x0005, "End-of-data detected"},
+	{0x0006, "I/O process terminated"},
+	{0x0007, "Programmable early warning detected"},
+	{0x0011, "Audio play operation in progress"},
+	{0x0012, "Audio play operation paused"},
+	{0x0013, "Audio play operation successfully completed"},
+	{0x0014, "Audio play operation stopped due to error"},
+	{0x0015, "No current audio status to return"},
+	{0x0016, "Operation in progress"},
+	{0x0017, "Cleaning requested"},
+	{0x0018, "Erase operation in progress"},
+	{0x0019, "Locate operation in progress"},
+	{0x001A, "Rewind operation in progress"},
+	{0x001B, "Set capacity operation in progress"},
+	{0x001C, "Verify operation in progress"},
+	{0x001D, "ATA pass through information available"},
+	{0x001E, "Conflicting SA creation request"},
+	{0x001F, "Logical unit transitioning to another power condition"},
+	{0x0020, "Extended copy information available"},
+	{0x0021, "Atomic command aborted due to ACA"},
+
+	{0x0100, "No index/sector signal"},
+
+	{0x0200, "No seek complete"},
+
+	{0x0300, "Peripheral device write fault"},
+	{0x0301, "No write current"},
+	{0x0302, "Excessive write errors"},
+
+	{0x0400, "Logical unit not ready, cause not reportable"},
+	{0x0401, "Logical unit is in process of becoming ready"},
+	{0x0402, "Logical unit not ready, initializing command required"},
+	{0x0403, "Logical unit not ready, manual intervention required"},
+	{0x0404, "Logical unit not ready, format in progress"},
+	{0x0405, "Logical unit not ready, rebuild in progress"},
+	{0x0406, "Logical unit not ready, recalculation in progress"},
+	{0x0407, "Logical unit not ready, operation in progress"},
+	{0x0408, "Logical unit not ready, long write in progress"},
+	{0x0409, "Logical unit not ready, self-test in progress"},
+	{0x040A, "Logical unit not accessible, asymmetric access state "
+	 "transition"},
+	{0x040B, "Logical unit not accessible, target port in standby state"},
+	{0x040C, "Logical unit not accessible, target port in unavailable "
+	 "state"},
+	{0x040D, "Logical unit not ready, structure check required"},
+	{0x040E, "Logical unit not ready, security session in progress"},
+	{0x0410, "Logical unit not ready, auxiliary memory not accessible"},
+	{0x0411, "Logical unit not ready, notify (enable spinup) required"},
+	{0x0412, "Logical unit not ready, offline"},
+	{0x0413, "Logical unit not ready, SA creation in progress"},
+	{0x0414, "Logical unit not ready, space allocation in progress"},
+	{0x0415, "Logical unit not ready, robotics disabled"},
+	{0x0416, "Logical unit not ready, configuration required"},
+	{0x0417, "Logical unit not ready, calibration required"},
+	{0x0418, "Logical unit not ready, a door is open"},
+	{0x0419, "Logical unit not ready, operating in sequential mode"},
+	{0x041A, "Logical unit not ready, start stop unit command in "
+	 "progress"},
+	{0x041B, "Logical unit not ready, sanitize in progress"},
+	{0x041C, "Logical unit not ready, additional power use not yet "
+	 "granted"},
+	{0x041D, "Logical unit not ready, configuration in progress"},
+	{0x041E, "Logical unit not ready, microcode activation required"},
+	{0x041F, "Logical unit not ready, microcode download required"},
+	{0x0420, "Logical unit not ready, logical unit reset required"},
+	{0x0421, "Logical unit not ready, hard reset required"},
+	{0x0422, "Logical unit not ready, power cycle required"},
+
+	{0x0500, "Logical unit does not respond to selection"},
+
+	{0x0600, "No reference position found"},
+
+	{0x0700, "Multiple peripheral devices selected"},
+
+	{0x0800, "Logical unit communication failure"},
+	{0x0801, "Logical unit communication time-out"},
+	{0x0802, "Logical unit communication parity error"},
+	{0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
+	{0x0804, "Unreachable copy target"},
+
+	{0x0900, "Track following error"},
+	{0x0901, "Tracking servo failure"},
+	{0x0902, "Focus servo failure"},
+	{0x0903, "Spindle servo failure"},
+	{0x0904, "Head select fault"},
+	{0x0905, "Vibration induced tracking error"},
+
+	{0x0A00, "Error log overflow"},
+
+	{0x0B00, "Warning"},
+	{0x0B01, "Warning - specified temperature exceeded"},
+	{0x0B02, "Warning - enclosure degraded"},
+	{0x0B03, "Warning - background self-test failed"},
+	{0x0B04, "Warning - background pre-scan detected medium error"},
+	{0x0B05, "Warning - background medium scan detected medium error"},
+	{0x0B06, "Warning - non-volatile cache now volatile"},
+	{0x0B07, "Warning - degraded power to non-volatile cache"},
+	{0x0B08, "Warning - power loss expected"},
+	{0x0B09, "Warning - device statistics notification active"},
+
+	{0x0C00, "Write error"},
+	{0x0C01, "Write error - recovered with auto reallocation"},
+	{0x0C02, "Write error - auto reallocation failed"},
+	{0x0C03, "Write error - recommend reassignment"},
+	{0x0C04, "Compression check miscompare error"},
+	{0x0C05, "Data expansion occurred during compression"},
+	{0x0C06, "Block not compressible"},
+	{0x0C07, "Write error - recovery needed"},
+	{0x0C08, "Write error - recovery failed"},
+	{0x0C09, "Write error - loss of streaming"},
+	{0x0C0A, "Write error - padding blocks added"},
+	{0x0C0B, "Auxiliary memory write error"},
+	{0x0C0C, "Write error - unexpected unsolicited data"},
+	{0x0C0D, "Write error - not enough unsolicited data"},
+	{0x0C0E, "Multiple write errors"},
+	{0x0C0F, "Defects in error window"},
+	{0x0C10, "Incomplete multiple atomic write operations"},
+
+	{0x0D00, "Error detected by third party temporary initiator"},
+	{0x0D01, "Third party device failure"},
+	{0x0D02, "Copy target device not reachable"},
+	{0x0D03, "Incorrect copy target device type"},
+	{0x0D04, "Copy target device data underrun"},
+	{0x0D05, "Copy target device data overrun"},
+
+	{0x0E00, "Invalid information unit"},
+	{0x0E01, "Information unit too short"},
+	{0x0E02, "Information unit too long"},
+	{0x0E03, "Invalid field in command information unit"},
+
+	{0x1000, "Id CRC or ECC error"},
+	{0x1001, "Logical block guard check failed"},
+	{0x1002, "Logical block application tag check failed"},
+	{0x1003, "Logical block reference tag check failed"},
+	{0x1004, "Logical block protection error on recover buffered data"},
+	{0x1005, "Logical block protection method error"},
+
+	{0x1100, "Unrecovered read error"},
+	{0x1101, "Read retries exhausted"},
+	{0x1102, "Error too long to correct"},
+	{0x1103, "Multiple read errors"},
+	{0x1104, "Unrecovered read error - auto reallocate failed"},
+	{0x1105, "L-EC uncorrectable error"},
+	{0x1106, "CIRC unrecovered error"},
+	{0x1107, "Data re-synchronization error"},
+	{0x1108, "Incomplete block read"},
+	{0x1109, "No gap found"},
+	{0x110A, "Miscorrected error"},
+	{0x110B, "Unrecovered read error - recommend reassignment"},
+	{0x110C, "Unrecovered read error - recommend rewrite the data"},
+	{0x110D, "De-compression CRC error"},
+	{0x110E, "Cannot decompress using declared algorithm"},
+	{0x110F, "Error reading UPC/EAN number"},
+	{0x1110, "Error reading ISRC number"},
+	{0x1111, "Read error - loss of streaming"},
+	{0x1112, "Auxiliary memory read error"},
+	{0x1113, "Read error - failed retransmission request"},
+	{0x1114, "Read error - lba marked bad by application client"},
+	{0x1115, "Write after sanitize required"},
+
+	{0x1200, "Address mark not found for id field"},
+
+	{0x1300, "Address mark not found for data field"},
+
+	{0x1400, "Recorded entity not found"},
+	{0x1401, "Record not found"},
+	{0x1402, "Filemark or setmark not found"},
+	{0x1403, "End-of-data not found"},
+	{0x1404, "Block sequence error"},
+	{0x1405, "Record not found - recommend reassignment"},
+	{0x1406, "Record not found - data auto-reallocated"},
+	{0x1407, "Locate operation failure"},
+
+	{0x1500, "Random positioning error"},
+	{0x1501, "Mechanical positioning error"},
+	{0x1502, "Positioning error detected by read of medium"},
+
+	{0x1600, "Data synchronization mark error"},
+	{0x1601, "Data sync error - data rewritten"},
+	{0x1602, "Data sync error - recommend rewrite"},
+	{0x1603, "Data sync error - data auto-reallocated"},
+	{0x1604, "Data sync error - recommend reassignment"},
+
+	{0x1700, "Recovered data with no error correction applied"},
+	{0x1701, "Recovered data with retries"},
+	{0x1702, "Recovered data with positive head offset"},
+	{0x1703, "Recovered data with negative head offset"},
+	{0x1704, "Recovered data with retries and/or circ applied"},
+	{0x1705, "Recovered data using previous sector id"},
+	{0x1706, "Recovered data without ECC - data auto-reallocated"},
+	{0x1707, "Recovered data without ECC - recommend reassignment"},
+	{0x1708, "Recovered data without ECC - recommend rewrite"},
+	{0x1709, "Recovered data without ECC - data rewritten"},
+
+	{0x1800, "Recovered data with error correction applied"},
+	{0x1801, "Recovered data with error corr. & retries applied"},
+	{0x1802, "Recovered data - data auto-reallocated"},
+	{0x1803, "Recovered data with CIRC"},
+	{0x1804, "Recovered data with L-EC"},
+	{0x1805, "Recovered data - recommend reassignment"},
+	{0x1806, "Recovered data - recommend rewrite"},
+	{0x1807, "Recovered data with ECC - data rewritten"},
+	{0x1808, "Recovered data with linking"},
+
+	{0x1900, "Defect list error"},
+	{0x1901, "Defect list not available"},
+	{0x1902, "Defect list error in primary list"},
+	{0x1903, "Defect list error in grown list"},
+
+	{0x1A00, "Parameter list length error"},
+
+	{0x1B00, "Synchronous data transfer error"},
+
+	{0x1C00, "Defect list not found"},
+	{0x1C01, "Primary defect list not found"},
+	{0x1C02, "Grown defect list not found"},
+
+	{0x1D00, "Miscompare during verify operation"},
+	{0x1D01, "Miscompare verify of unmapped LBA"},
+
+	{0x1E00, "Recovered id with ECC correction"},
+
+	{0x1F00, "Partial defect list transfer"},
+
+	{0x2000, "Invalid command operation code"},
+	{0x2001, "Access denied - initiator pending-enrolled"},
+	{0x2002, "Access denied - no access rights"},
+	{0x2003, "Access denied - invalid mgmt id key"},
+	{0x2004, "Illegal command while in write capable state"},
+	{0x2005, "Obsolete"},
+	{0x2006, "Illegal command while in explicit address mode"},
+	{0x2007, "Illegal command while in implicit address mode"},
+	{0x2008, "Access denied - enrollment conflict"},
+	{0x2009, "Access denied - invalid LU identifier"},
+	{0x200A, "Access denied - invalid proxy token"},
+	{0x200B, "Access denied - ACL LUN conflict"},
+	{0x200C, "Illegal command when not in append-only mode"},
+
+	{0x2100, "Logical block address out of range"},
+	{0x2101, "Invalid element address"},
+	{0x2102, "Invalid address for write"},
+	{0x2103, "Invalid write crossing layer jump"},
+	{0x2104, "Unaligned write command"},
+	{0x2105, "Write boundary violation"},
+	{0x2106, "Attempt to read invalid data"},
+	{0x2107, "Read boundary violation"},
+
+	{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
+
+	{0x2300, "Invalid token operation, cause not reportable"},
+	{0x2301, "Invalid token operation, unsupported token type"},
+	{0x2302, "Invalid token operation, remote token usage not supported"},
+	{0x2303, "Invalid token operation, remote rod token creation not "
+	 "supported"},
+	{0x2304, "Invalid token operation, token unknown"},
+	{0x2305, "Invalid token operation, token corrupt"},
+	{0x2306, "Invalid token operation, token revoked"},
+	{0x2307, "Invalid token operation, token expired"},
+	{0x2308, "Invalid token operation, token cancelled"},
+	{0x2309, "Invalid token operation, token deleted"},
+	{0x230A, "Invalid token operation, invalid token length"},
+
+	{0x2400, "Invalid field in cdb"},
+	{0x2401, "CDB decryption error"},
+	{0x2402, "Obsolete"},
+	{0x2403, "Obsolete"},
+	{0x2404, "Security audit value frozen"},
+	{0x2405, "Security working key frozen"},
+	{0x2406, "Nonce not unique"},
+	{0x2407, "Nonce timestamp out of range"},
+	{0x2408, "Invalid XCDB"},
+
+	{0x2500, "Logical unit not supported"},
+
+	{0x2600, "Invalid field in parameter list"},
+	{0x2601, "Parameter not supported"},
+	{0x2602, "Parameter value invalid"},
+	{0x2603, "Threshold parameters not supported"},
+	{0x2604, "Invalid release of persistent reservation"},
+	{0x2605, "Data decryption error"},
+	{0x2606, "Too many target descriptors"},
+	{0x2607, "Unsupported target descriptor type code"},
+	{0x2608, "Too many segment descriptors"},
+	{0x2609, "Unsupported segment descriptor type code"},
+	{0x260A, "Unexpected inexact segment"},
+	{0x260B, "Inline data length exceeded"},
+	{0x260C, "Invalid operation for copy source or destination"},
+	{0x260D, "Copy segment granularity violation"},
+	{0x260E, "Invalid parameter while port is enabled"},
+	{0x260F, "Invalid data-out buffer integrity check value"},
+	{0x2610, "Data decryption key fail limit reached"},
+	{0x2611, "Incomplete key-associated data set"},
+	{0x2612, "Vendor specific key reference not found"},
+
+	{0x2700, "Write protected"},
+	{0x2701, "Hardware write protected"},
+	{0x2702, "Logical unit software write protected"},
+	{0x2703, "Associated write protect"},
+	{0x2704, "Persistent write protect"},
+	{0x2705, "Permanent write protect"},
+	{0x2706, "Conditional write protect"},
+	{0x2707, "Space allocation failed write protect"},
+	{0x2708, "Zone is read only"},
+
+	{0x2800, "Not ready to ready change, medium may have changed"},
+	{0x2801, "Import or export element accessed"},
+	{0x2802, "Format-layer may have changed"},
+	{0x2803, "Import/export element accessed, medium changed"},
+
+	{0x2900, "Power on, reset, or bus device reset occurred"},
+	{0x2901, "Power on occurred"},
+	{0x2902, "Scsi bus reset occurred"},
+	{0x2903, "Bus device reset function occurred"},
+	{0x2904, "Device internal reset"},
+	{0x2905, "Transceiver mode changed to single-ended"},
+	{0x2906, "Transceiver mode changed to lvd"},
+	{0x2907, "I_T nexus loss occurred"},
+
+	{0x2A00, "Parameters changed"},
+	{0x2A01, "Mode parameters changed"},
+	{0x2A02, "Log parameters changed"},
+	{0x2A03, "Reservations preempted"},
+	{0x2A04, "Reservations released"},
+	{0x2A05, "Registrations preempted"},
+	{0x2A06, "Asymmetric access state changed"},
+	{0x2A07, "Implicit asymmetric access state transition failed"},
+	{0x2A08, "Priority changed"},
+	{0x2A09, "Capacity data has changed"},
+	{0x2A0A, "Error history I_T nexus cleared"},
+	{0x2A0B, "Error history snapshot released"},
+	{0x2A0C, "Error recovery attributes have changed"},
+	{0x2A0D, "Data encryption capabilities changed"},
+	{0x2A10, "Timestamp changed"},
+	{0x2A11, "Data encryption parameters changed by another i_t nexus"},
+	{0x2A12, "Data encryption parameters changed by vendor specific "
+		 "event"},
+	{0x2A13, "Data encryption key instance counter has changed"},
+	{0x2A14, "SA creation capabilities data has changed"},
+	{0x2A15, "Medium removal prevention preempted"},
+
+	{0x2B00, "Copy cannot execute since host cannot disconnect"},
+
+	{0x2C00, "Command sequence error"},
+	{0x2C01, "Too many windows specified"},
+	{0x2C02, "Invalid combination of windows specified"},
+	{0x2C03, "Current program area is not empty"},
+	{0x2C04, "Current program area is empty"},
+	{0x2C05, "Illegal power condition request"},
+	{0x2C06, "Persistent prevent conflict"},
+	{0x2C07, "Previous busy status"},
+	{0x2C08, "Previous task set full status"},
+	{0x2C09, "Previous reservation conflict status"},
+	{0x2C0A, "Partition or collection contains user objects"},
+	{0x2C0B, "Not reserved"},
+	{0x2C0C, "Orwrite generation does not match"},
+	{0x2C0D, "Reset write pointer not allowed"},
+	{0x2C0E, "Zone is offline"},
+
+	{0x2D00, "Overwrite error on update in place"},
+
+	{0x2E00, "Insufficient time for operation"},
+	{0x2E01, "Command timeout before processing"},
+	{0x2E02, "Command timeout during processing"},
+	{0x2E03, "Command timeout during processing due to error recovery"},
+
+	{0x2F00, "Commands cleared by another initiator"},
+	{0x2F01, "Commands cleared by power loss notification"},
+	{0x2F02, "Commands cleared by device server"},
+	{0x2F03, "Some commands cleared by queuing layer event"},
+
+	{0x3000, "Incompatible medium installed"},
+	{0x3001, "Cannot read medium - unknown format"},
+	{0x3002, "Cannot read medium - incompatible format"},
+	{0x3003, "Cleaning cartridge installed"},
+	{0x3004, "Cannot write medium - unknown format"},
+	{0x3005, "Cannot write medium - incompatible format"},
+	{0x3006, "Cannot format medium - incompatible medium"},
+	{0x3007, "Cleaning failure"},
+	{0x3008, "Cannot write - application code mismatch"},
+	{0x3009, "Current session not fixated for append"},
+	{0x300A, "Cleaning request rejected"},
+	{0x300C, "WORM medium - overwrite attempted"},
+	{0x300D, "WORM medium - integrity check"},
+	{0x3010, "Medium not formatted"},
+	{0x3011, "Incompatible volume type"},
+	{0x3012, "Incompatible volume qualifier"},
+	{0x3013, "Cleaning volume expired"},
+
+	{0x3100, "Medium format corrupted"},
+	{0x3101, "Format command failed"},
+	{0x3102, "Zoned formatting failed due to spare linking"},
+	{0x3103, "Sanitize command failed"},
+
+	{0x3200, "No defect spare location available"},
+	{0x3201, "Defect list update failure"},
+
+	{0x3300, "Tape length error"},
+
+	{0x3400, "Enclosure failure"},
+
+	{0x3500, "Enclosure services failure"},
+	{0x3501, "Unsupported enclosure function"},
+	{0x3502, "Enclosure services unavailable"},
+	{0x3503, "Enclosure services transfer failure"},
+	{0x3504, "Enclosure services transfer refused"},
+	{0x3505, "Enclosure services checksum error"},
+
+	{0x3600, "Ribbon, ink, or toner failure"},
+
+	{0x3700, "Rounded parameter"},
+
+	{0x3800, "Event status notification"},
+	{0x3802, "Esn - power management class event"},
+	{0x3804, "Esn - media class event"},
+	{0x3806, "Esn - device busy class event"},
+	{0x3807, "Thin Provisioning soft threshold reached"},
+
+	{0x3900, "Saving parameters not supported"},
+
+	{0x3A00, "Medium not present"},
+	{0x3A01, "Medium not present - tray closed"},
+	{0x3A02, "Medium not present - tray open"},
+	{0x3A03, "Medium not present - loadable"},
+	{0x3A04, "Medium not present - medium auxiliary memory accessible"},
+
+	{0x3B00, "Sequential positioning error"},
+	{0x3B01, "Tape position error at beginning-of-medium"},
+	{0x3B02, "Tape position error at end-of-medium"},
+	{0x3B03, "Tape or electronic vertical forms unit not ready"},
+	{0x3B04, "Slew failure"},
+	{0x3B05, "Paper jam"},
+	{0x3B06, "Failed to sense top-of-form"},
+	{0x3B07, "Failed to sense bottom-of-form"},
+	{0x3B08, "Reposition error"},
+	{0x3B09, "Read past end of medium"},
+	{0x3B0A, "Read past beginning of medium"},
+	{0x3B0B, "Position past end of medium"},
+	{0x3B0C, "Position past beginning of medium"},
+	{0x3B0D, "Medium destination element full"},
+	{0x3B0E, "Medium source element empty"},
+	{0x3B0F, "End of medium reached"},
+	{0x3B11, "Medium magazine not accessible"},
+	{0x3B12, "Medium magazine removed"},
+	{0x3B13, "Medium magazine inserted"},
+	{0x3B14, "Medium magazine locked"},
+	{0x3B15, "Medium magazine unlocked"},
+	{0x3B16, "Mechanical positioning or changer error"},
+	{0x3B17, "Read past end of user object"},
+	{0x3B18, "Element disabled"},
+	{0x3B19, "Element enabled"},
+	{0x3B1A, "Data transfer device removed"},
+	{0x3B1B, "Data transfer device inserted"},
+	{0x3B1C, "Too many logical objects on partition to support "
+	 "operation"},
+
+	{0x3D00, "Invalid bits in identify message"},
+
+	{0x3E00, "Logical unit has not self-configured yet"},
+	{0x3E01, "Logical unit failure"},
+	{0x3E02, "Timeout on logical unit"},
+	{0x3E03, "Logical unit failed self-test"},
+	{0x3E04, "Logical unit unable to update self-test log"},
+
+	{0x3F00, "Target operating conditions have changed"},
+	{0x3F01, "Microcode has been changed"},
+	{0x3F02, "Changed operating definition"},
+	{0x3F03, "Inquiry data has changed"},
+	{0x3F04, "Component device attached"},
+	{0x3F05, "Device identifier changed"},
+	{0x3F06, "Redundancy group created or modified"},
+	{0x3F07, "Redundancy group deleted"},
+	{0x3F08, "Spare created or modified"},
+	{0x3F09, "Spare deleted"},
+	{0x3F0A, "Volume set created or modified"},
+	{0x3F0B, "Volume set deleted"},
+	{0x3F0C, "Volume set deassigned"},
+	{0x3F0D, "Volume set reassigned"},
+	{0x3F0E, "Reported luns data has changed"},
+	{0x3F0F, "Echo buffer overwritten"},
+	{0x3F10, "Medium loadable"},
+	{0x3F11, "Medium auxiliary memory accessible"},
+	{0x3F12, "iSCSI IP address added"},
+	{0x3F13, "iSCSI IP address removed"},
+	{0x3F14, "iSCSI IP address changed"},
+	{0x3F15, "Inspect referrals sense descriptors"},
+	{0x3F16, "Microcode has been changed without reset"},
+/*
+ *	{0x40NN, "Ram failure"},
+ *	{0x40NN, "Diagnostic failure on component nn"},
+ *	{0x41NN, "Data path failure"},
+ *	{0x42NN, "Power-on or self-test failure"},
+ */
+	{0x4300, "Message error"},
+
+	{0x4400, "Internal target failure"},
+	{0x4401, "Persistent reservation information lost"},
+	{0x4471, "ATA device failed set features"},
+
+	{0x4500, "Select or reselect failure"},
+
+	{0x4600, "Unsuccessful soft reset"},
+
+	{0x4700, "Scsi parity error"},
+	{0x4701, "Data phase CRC error detected"},
+	{0x4702, "Scsi parity error detected during st data phase"},
+	{0x4703, "Information unit iuCRC error detected"},
+	{0x4704, "Asynchronous information protection error detected"},
+	{0x4705, "Protocol service CRC error"},
+	{0x4706, "Phy test function in progress"},
+	{0x477f, "Some commands cleared by iSCSI Protocol event"},
+
+	{0x4800, "Initiator detected error message received"},
+
+	{0x4900, "Invalid message error"},
+
+	{0x4A00, "Command phase error"},
+
+	{0x4B00, "Data phase error"},
+	{0x4B01, "Invalid target port transfer tag received"},
+	{0x4B02, "Too much write data"},
+	{0x4B03, "Ack/nak timeout"},
+	{0x4B04, "Nak received"},
+	{0x4B05, "Data offset error"},
+	{0x4B06, "Initiator response timeout"},
+	{0x4B07, "Connection lost"},
+	{0x4B08, "Data-in buffer overflow - data buffer size"},
+	{0x4B09, "Data-in buffer overflow - data buffer descriptor area"},
+	{0x4B0A, "Data-in buffer error"},
+	{0x4B0B, "Data-out buffer overflow - data buffer size"},
+	{0x4B0C, "Data-out buffer overflow - data buffer descriptor area"},
+	{0x4B0D, "Data-out buffer error"},
+	{0x4B0E, "PCIe fabric error"},
+	{0x4B0F, "PCIe completion timeout"},
+	{0x4B10, "PCIe completer abort"},
+	{0x4B11, "PCIe poisoned tlp received"},
+	{0x4B12, "PCIe eCRC check failed"},
+	{0x4B13, "PCIe unsupported request"},
+	{0x4B14, "PCIe acs violation"},
+	{0x4B15, "PCIe tlp prefix blocked"},
+
+	{0x4C00, "Logical unit failed self-configuration"},
+/*
+ *	{0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
+ */
+	{0x4E00, "Overlapped commands attempted"},
+
+	{0x5000, "Write append error"},
+	{0x5001, "Write append position error"},
+	{0x5002, "Position error related to timing"},
+
+	{0x5100, "Erase failure"},
+	{0x5101, "Erase failure - incomplete erase operation detected"},
+
+	{0x5200, "Cartridge fault"},
+
+	{0x5300, "Media load or eject failed"},
+	{0x5301, "Unload tape failure"},
+	{0x5302, "Medium removal prevented"},
+	{0x5303, "Medium removal prevented by data transfer element"},
+	{0x5304, "Medium thread or unthread failure"},
+	{0x5305, "Volume identifier invalid"},
+	{0x5306, "Volume identifier missing"},
+	{0x5307, "Duplicate volume identifier"},
+	{0x5308, "Element status unknown"},
+	{0x5309, "Data transfer device error - load failed"},
+	{0x530a, "Data transfer device error - unload failed"},
+	{0x530b, "Data transfer device error - unload missing"},
+	{0x530c, "Data transfer device error - eject failed"},
+	{0x530d, "Data transfer device error - library communication failed"},
+
+	{0x5400, "Scsi to host system interface failure"},
+
+	{0x5500, "System resource failure"},
+	{0x5501, "System buffer full"},
+	{0x5502, "Insufficient reservation resources"},
+	{0x5503, "Insufficient resources"},
+	{0x5504, "Insufficient registration resources"},
+	{0x5505, "Insufficient access control resources"},
+	{0x5506, "Auxiliary memory out of space"},
+	{0x5507, "Quota error"},
+	{0x5508, "Maximum number of supplemental decryption keys exceeded"},
+	{0x5509, "Medium auxiliary memory not accessible"},
+	{0x550A, "Data currently unavailable"},
+	{0x550B, "Insufficient power for operation"},
+	{0x550C, "Insufficient resources to create rod"},
+	{0x550D, "Insufficient resources to create rod token"},
+	{0x550E, "Insufficient zone resources"},
+
+	{0x5700, "Unable to recover table-of-contents"},
+
+	{0x5800, "Generation does not exist"},
+
+	{0x5900, "Updated block read"},
+
+	{0x5A00, "Operator request or state change input"},
+	{0x5A01, "Operator medium removal request"},
+	{0x5A02, "Operator selected write protect"},
+	{0x5A03, "Operator selected write permit"},
+
+	{0x5B00, "Log exception"},
+	{0x5B01, "Threshold condition met"},
+	{0x5B02, "Log counter at maximum"},
+	{0x5B03, "Log list codes exhausted"},
+
+	{0x5C00, "Rpl status change"},
+	{0x5C01, "Spindles synchronized"},
+	{0x5C02, "Spindles not synchronized"},
+
+	{0x5D00, "Failure prediction threshold exceeded"},
+	{0x5D01, "Media failure prediction threshold exceeded"},
+	{0x5D02, "Logical unit failure prediction threshold exceeded"},
+	{0x5D03, "Spare area exhaustion prediction threshold exceeded"},
+	{0x5D10, "Hardware impending failure general hard drive failure"},
+	{0x5D11, "Hardware impending failure drive error rate too high"},
+	{0x5D12, "Hardware impending failure data error rate too high"},
+	{0x5D13, "Hardware impending failure seek error rate too high"},
+	{0x5D14, "Hardware impending failure too many block reassigns"},
+	{0x5D15, "Hardware impending failure access times too high"},
+	{0x5D16, "Hardware impending failure start unit times too high"},
+	{0x5D17, "Hardware impending failure channel parametrics"},
+	{0x5D18, "Hardware impending failure controller detected"},
+	{0x5D19, "Hardware impending failure throughput performance"},
+	{0x5D1A, "Hardware impending failure seek time performance"},
+	{0x5D1B, "Hardware impending failure spin-up retry count"},
+	{0x5D1C, "Hardware impending failure drive calibration retry count"},
+	{0x5D20, "Controller impending failure general hard drive failure"},
+	{0x5D21, "Controller impending failure drive error rate too high"},
+	{0x5D22, "Controller impending failure data error rate too high"},
+	{0x5D23, "Controller impending failure seek error rate too high"},
+	{0x5D24, "Controller impending failure too many block reassigns"},
+	{0x5D25, "Controller impending failure access times too high"},
+	{0x5D26, "Controller impending failure start unit times too high"},
+	{0x5D27, "Controller impending failure channel parametrics"},
+	{0x5D28, "Controller impending failure controller detected"},
+	{0x5D29, "Controller impending failure throughput performance"},
+	{0x5D2A, "Controller impending failure seek time performance"},
+	{0x5D2B, "Controller impending failure spin-up retry count"},
+	{0x5D2C, "Controller impending failure drive calibration retry count"},
+	{0x5D30, "Data channel impending failure general hard drive failure"},
+	{0x5D31, "Data channel impending failure drive error rate too high"},
+	{0x5D32, "Data channel impending failure data error rate too high"},
+	{0x5D33, "Data channel impending failure seek error rate too high"},
+	{0x5D34, "Data channel impending failure too many block reassigns"},
+	{0x5D35, "Data channel impending failure access times too high"},
+	{0x5D36, "Data channel impending failure start unit times too high"},
+	{0x5D37, "Data channel impending failure channel parametrics"},
+	{0x5D38, "Data channel impending failure controller detected"},
+	{0x5D39, "Data channel impending failure throughput performance"},
+	{0x5D3A, "Data channel impending failure seek time performance"},
+	{0x5D3B, "Data channel impending failure spin-up retry count"},
+	{0x5D3C, "Data channel impending failure drive calibration retry "
+	 "count"},
+	{0x5D40, "Servo impending failure general hard drive failure"},
+	{0x5D41, "Servo impending failure drive error rate too high"},
+	{0x5D42, "Servo impending failure data error rate too high"},
+	{0x5D43, "Servo impending failure seek error rate too high"},
+	{0x5D44, "Servo impending failure too many block reassigns"},
+	{0x5D45, "Servo impending failure access times too high"},
+	{0x5D46, "Servo impending failure start unit times too high"},
+	{0x5D47, "Servo impending failure channel parametrics"},
+	{0x5D48, "Servo impending failure controller detected"},
+	{0x5D49, "Servo impending failure throughput performance"},
+	{0x5D4A, "Servo impending failure seek time performance"},
+	{0x5D4B, "Servo impending failure spin-up retry count"},
+	{0x5D4C, "Servo impending failure drive calibration retry count"},
+	{0x5D50, "Spindle impending failure general hard drive failure"},
+	{0x5D51, "Spindle impending failure drive error rate too high"},
+	{0x5D52, "Spindle impending failure data error rate too high"},
+	{0x5D53, "Spindle impending failure seek error rate too high"},
+	{0x5D54, "Spindle impending failure too many block reassigns"},
+	{0x5D55, "Spindle impending failure access times too high"},
+	{0x5D56, "Spindle impending failure start unit times too high"},
+	{0x5D57, "Spindle impending failure channel parametrics"},
+	{0x5D58, "Spindle impending failure controller detected"},
+	{0x5D59, "Spindle impending failure throughput performance"},
+	{0x5D5A, "Spindle impending failure seek time performance"},
+	{0x5D5B, "Spindle impending failure spin-up retry count"},
+	{0x5D5C, "Spindle impending failure drive calibration retry count"},
+	{0x5D60, "Firmware impending failure general hard drive failure"},
+	{0x5D61, "Firmware impending failure drive error rate too high"},
+	{0x5D62, "Firmware impending failure data error rate too high"},
+	{0x5D63, "Firmware impending failure seek error rate too high"},
+	{0x5D64, "Firmware impending failure too many block reassigns"},
+	{0x5D65, "Firmware impending failure access times too high"},
+	{0x5D66, "Firmware impending failure start unit times too high"},
+	{0x5D67, "Firmware impending failure channel parametrics"},
+	{0x5D68, "Firmware impending failure controller detected"},
+	{0x5D69, "Firmware impending failure throughput performance"},
+	{0x5D6A, "Firmware impending failure seek time performance"},
+	{0x5D6B, "Firmware impending failure spin-up retry count"},
+	{0x5D6C, "Firmware impending failure drive calibration retry count"},
+	{0x5DFF, "Failure prediction threshold exceeded (false)"},
+
+	{0x5E00, "Low power condition on"},
+	{0x5E01, "Idle condition activated by timer"},
+	{0x5E02, "Standby condition activated by timer"},
+	{0x5E03, "Idle condition activated by command"},
+	{0x5E04, "Standby condition activated by command"},
+	{0x5E05, "Idle_b condition activated by timer"},
+	{0x5E06, "Idle_b condition activated by command"},
+	{0x5E07, "Idle_c condition activated by timer"},
+	{0x5E08, "Idle_c condition activated by command"},
+	{0x5E09, "Standby_y condition activated by timer"},
+	{0x5E0A, "Standby_y condition activated by command"},
+	{0x5E41, "Power state change to active"},
+	{0x5E42, "Power state change to idle"},
+	{0x5E43, "Power state change to standby"},
+	{0x5E45, "Power state change to sleep"},
+	{0x5E47, "Power state change to device control"},
+
+	{0x6000, "Lamp failure"},
+
+	{0x6100, "Video acquisition error"},
+	{0x6101, "Unable to acquire video"},
+	{0x6102, "Out of focus"},
+
+	{0x6200, "Scan head positioning error"},
+
+	{0x6300, "End of user area encountered on this track"},
+	{0x6301, "Packet does not fit in available space"},
+
+	{0x6400, "Illegal mode for this track"},
+	{0x6401, "Invalid packet size"},
+
+	{0x6500, "Voltage fault"},
+
+	{0x6600, "Automatic document feeder cover up"},
+	{0x6601, "Automatic document feeder lift up"},
+	{0x6602, "Document jam in automatic document feeder"},
+	{0x6603, "Document miss feed automatic in document feeder"},
+
+	{0x6700, "Configuration failure"},
+	{0x6701, "Configuration of incapable logical units failed"},
+	{0x6702, "Add logical unit failed"},
+	{0x6703, "Modification of logical unit failed"},
+	{0x6704, "Exchange of logical unit failed"},
+	{0x6705, "Remove of logical unit failed"},
+	{0x6706, "Attachment of logical unit failed"},
+	{0x6707, "Creation of logical unit failed"},
+	{0x6708, "Assign failure occurred"},
+	{0x6709, "Multiply assigned logical unit"},
+	{0x670A, "Set target port groups command failed"},
+	{0x670B, "ATA device feature not enabled"},
+
+	{0x6800, "Logical unit not configured"},
+	{0x6801, "Subsidiary logical unit not configured"},
+
+	{0x6900, "Data loss on logical unit"},
+	{0x6901, "Multiple logical unit failures"},
+	{0x6902, "Parity/data mismatch"},
+
+	{0x6A00, "Informational, refer to log"},
+
+	{0x6B00, "State change has occurred"},
+	{0x6B01, "Redundancy level got better"},
+	{0x6B02, "Redundancy level got worse"},
+
+	{0x6C00, "Rebuild failure occurred"},
+
+	{0x6D00, "Recalculate failure occurred"},
+
+	{0x6E00, "Command to logical unit failed"},
+
+	{0x6F00, "Copy protection key exchange failure - authentication "
+	 "failure"},
+	{0x6F01, "Copy protection key exchange failure - key not present"},
+	{0x6F02, "Copy protection key exchange failure - key not established"},
+	{0x6F03, "Read of scrambled sector without authentication"},
+	{0x6F04, "Media region code is mismatched to logical unit region"},
+	{0x6F05, "Drive region must be permanent/region reset count error"},
+	{0x6F06, "Insufficient block count for binding nonce recording"},
+	{0x6F07, "Conflict in binding nonce recording"},
+/*
+ *	{0x70NN, "Decompression exception short algorithm id of nn"},
+ */
+	{0x7100, "Decompression exception long algorithm id"},
+
+	{0x7200, "Session fixation error"},
+	{0x7201, "Session fixation error writing lead-in"},
+	{0x7202, "Session fixation error writing lead-out"},
+	{0x7203, "Session fixation error - incomplete track in session"},
+	{0x7204, "Empty or partially written reserved track"},
+	{0x7205, "No more track reservations allowed"},
+	{0x7206, "RMZ extension is not allowed"},
+	{0x7207, "No more test zone extensions are allowed"},
+
+	{0x7300, "Cd control error"},
+	{0x7301, "Power calibration area almost full"},
+	{0x7302, "Power calibration area is full"},
+	{0x7303, "Power calibration area error"},
+	{0x7304, "Program memory area update failure"},
+	{0x7305, "Program memory area is full"},
+	{0x7306, "RMA/PMA is almost full"},
+	{0x7310, "Current power calibration area almost full"},
+	{0x7311, "Current power calibration area is full"},
+	{0x7317, "RDZ is full"},
+
+	{0x7400, "Security error"},
+	{0x7401, "Unable to decrypt data"},
+	{0x7402, "Unencrypted data encountered while decrypting"},
+	{0x7403, "Incorrect data encryption key"},
+	{0x7404, "Cryptographic integrity validation failed"},
+	{0x7405, "Error decrypting data"},
+	{0x7406, "Unknown signature verification key"},
+	{0x7407, "Encryption parameters not useable"},
+	{0x7408, "Digital signature validation failure"},
+	{0x7409, "Encryption mode mismatch on read"},
+	{0x740A, "Encrypted block not raw read enabled"},
+	{0x740B, "Incorrect Encryption parameters"},
+	{0x740C, "Unable to decrypt parameter list"},
+	{0x740D, "Encryption algorithm disabled"},
+	{0x7410, "SA creation parameter value invalid"},
+	{0x7411, "SA creation parameter value rejected"},
+	{0x7412, "Invalid SA usage"},
+	{0x7421, "Data Encryption configuration prevented"},
+	{0x7430, "SA creation parameter not supported"},
+	{0x7440, "Authentication failed"},
+	{0x7461, "External data encryption key manager access error"},
+	{0x7462, "External data encryption key manager error"},
+	{0x7463, "External data encryption key not found"},
+	{0x7464, "External data encryption request not authorized"},
+	{0x746E, "External data encryption control timeout"},
+	{0x746F, "External data encryption control error"},
+	{0x7471, "Logical unit access not authorized"},
+	{0x7479, "Security conflict in translated device"},
+
+	{0, NULL}
+};
+
+struct error_info2 {
+	unsigned char code1, code2_min, code2_max;
+	const char * str;
+	const char * fmt;
+};
+
+static const struct error_info2 additional2[] =
+{
+	{0x40, 0x00, 0x7f, "Ram failure", ""},
+	{0x40, 0x80, 0xff, "Diagnostic failure on component", ""},
+	{0x41, 0x00, 0xff, "Data path failure", ""},
+	{0x42, 0x00, 0xff, "Power-on or self-test failure", ""},
+	{0x4D, 0x00, 0xff, "Tagged overlapped commands", "task tag "},
+	{0x70, 0x00, 0xff, "Decompression exception", "short algorithm id of "},
+	{0, 0, 0, NULL, NULL}
+};
+
+/* description of the sense key values */
+static const char * const snstext[] = {
+	"No Sense",	    /* 0: There is no sense information */
+	"Recovered Error",  /* 1: The last command completed successfully
+				  but used error correction */
+	"Not Ready",	    /* 2: The addressed target is not ready */
+	"Medium Error",	    /* 3: Data error detected on the medium */
+	"Hardware Error",   /* 4: Controller or device failure */
+	"Illegal Request",  /* 5: Error in request */
+	"Unit Attention",   /* 6: Removable medium was changed, or
+				  the target has been reset, or ... */
+	"Data Protect",	    /* 7: Access to the data is blocked */
+	"Blank Check",	    /* 8: Reached unexpected written or unwritten
+				  region of the medium */
+	"Vendor Specific(9)",
+	"Copy Aborted",	    /* A: COPY or COMPARE was aborted */
+	"Aborted Command",  /* B: The target aborted the command */
+	"Equal",	    /* C: A SEARCH DATA command found data equal,
+				  reserved in SPC-4 rev 36 */
+	"Volume Overflow",  /* D: Medium full with still data to be written */
+	"Miscompare",	    /* E: Source data and data on the medium
+				  do not agree */
+	"Completed",	    /* F: command completed sense data reported,
+				  may occur for successful command */
+};
+
+/* Get sense key string or NULL if not available */
+const char *
+scsi_sense_key_string(unsigned char key) {
+	if (key <= 0xE)
+		return snstext[key];
+	return NULL;
+}
+EXPORT_SYMBOL(scsi_sense_key_string);
+
+/*
+ * Get additional sense code string or NULL if not available.
+ * This string may contain a "%x" and should be printed with ascq as arg.
+ */
+const char *
+scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
+{
+	int i;
+	unsigned short code = ((asc << 8) | ascq);
+
+	*fmt = NULL;
+	for (i = 0; additional[i].text; i++)
+		if (additional[i].code12 == code)
+			return additional[i].text;
+	for (i = 0; additional2[i].fmt; i++) {
+		if (additional2[i].code1 == asc &&
+		    ascq >= additional2[i].code2_min &&
+		    ascq <= additional2[i].code2_max) {
+			*fmt = additional2[i].fmt;
+			return additional2[i].str;
+		}
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(scsi_extd_sense_format);
+
+static const char * const hostbyte_table[]={
+"DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET",
+"DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",
+"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE",
+"DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST", "DID_TARGET_FAILURE",
+"DID_NEXUS_FAILURE" };
+
+static const char * const driverbyte_table[]={
+"DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT",  "DRIVER_MEDIA", "DRIVER_ERROR",
+"DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"};
+
+const char *scsi_hostbyte_string(int result)
+{
+	const char *hb_string = NULL;
+	int hb = host_byte(result);
+
+	if (hb < ARRAY_SIZE(hostbyte_table))
+		hb_string = hostbyte_table[hb];
+	return hb_string;
+}
+EXPORT_SYMBOL(scsi_hostbyte_string);
+
+const char *scsi_driverbyte_string(int result)
+{
+	const char *db_string = NULL;
+	int db = driver_byte(result);
+
+	if (db < ARRAY_SIZE(driverbyte_table))
+		db_string = driverbyte_table[db];
+	return db_string;
+}
+EXPORT_SYMBOL(scsi_driverbyte_string);
+
+#define scsi_mlreturn_name(result)	{ result, #result }
+static const struct value_name_pair scsi_mlreturn_arr[] = {
+	scsi_mlreturn_name(NEEDS_RETRY),
+	scsi_mlreturn_name(SUCCESS),
+	scsi_mlreturn_name(FAILED),
+	scsi_mlreturn_name(QUEUED),
+	scsi_mlreturn_name(SOFT_ERROR),
+	scsi_mlreturn_name(ADD_TO_MLQUEUE),
+	scsi_mlreturn_name(TIMEOUT_ERROR),
+	scsi_mlreturn_name(SCSI_RETURN_NOT_HANDLED),
+	scsi_mlreturn_name(FAST_IO_FAIL)
+};
+
+const char *scsi_mlreturn_string(int result)
+{
+	const struct value_name_pair *arr = scsi_mlreturn_arr;
+	int k;
+
+	for (k = 0; k < ARRAY_SIZE(scsi_mlreturn_arr); ++k, ++arr) {
+		if (result == arr->value)
+			return arr->name;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(scsi_mlreturn_string);