summaryrefslogtreecommitdiff
path: root/drivers/scsi/g_NCR5380.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/scsi/g_NCR5380.c
Initial import
Diffstat (limited to 'drivers/scsi/g_NCR5380.c')
-rw-r--r--drivers/scsi/g_NCR5380.c741
1 files changed, 741 insertions, 0 deletions
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
new file mode 100644
index 000000000..f8d2478b1
--- /dev/null
+++ b/drivers/scsi/g_NCR5380.c
@@ -0,0 +1,741 @@
+/*
+ * Generic Generic NCR5380 driver
+ *
+ * Copyright 1993, Drew Eckhardt
+ * Visionary Computing
+ * (Unix and Linux consulting and custom programming)
+ * drew@colorado.edu
+ * +1 (303) 440-4894
+ *
+ * NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin
+ * K.Lentin@cs.monash.edu.au
+ *
+ * NCR53C400A extensions (c) 1996, Ingmar Baumgart
+ * ingmar@gonzo.schwaben.de
+ *
+ * DTC3181E extensions (c) 1997, Ronald van Cuijlenborg
+ * ronald.van.cuijlenborg@tip.nl or nutty@dds.nl
+ *
+ * Added ISAPNP support for DTC436 adapters,
+ * Thomas Sailer, sailer@ife.ee.ethz.ch
+ */
+
+/*
+ * TODO : flesh out DMA support, find some one actually using this (I have
+ * a memory mapped Trantor board that works fine)
+ */
+
+/*
+ * The card is detected and initialized in one of several ways :
+ * 1. With command line overrides - NCR5380=port,irq may be
+ * used on the LILO command line to override the defaults.
+ *
+ * 2. With the GENERIC_NCR5380_OVERRIDE compile time define. This is
+ * specified as an array of address, irq, dma, board tuples. Ie, for
+ * one board at 0x350, IRQ5, no dma, I could say
+ * -DGENERIC_NCR5380_OVERRIDE={{0xcc000, 5, DMA_NONE, BOARD_NCR5380}}
+ *
+ * -1 should be specified for no or DMA interrupt, -2 to autoprobe for an
+ * IRQ line if overridden on the command line.
+ *
+ * 3. When included as a module, with arguments passed on the command line:
+ * ncr_irq=xx the interrupt
+ * ncr_addr=xx the port or base address (for port or memory
+ * mapped, resp.)
+ * ncr_dma=xx the DMA
+ * ncr_5380=1 to set up for a NCR5380 board
+ * ncr_53c400=1 to set up for a NCR53C400 board
+ * e.g.
+ * modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
+ * for a port mapped NCR5380 board or
+ * modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
+ * for a memory mapped NCR53C400 board with interrupts disabled.
+ *
+ * 255 should be specified for no or DMA interrupt, 254 to autoprobe for an
+ * IRQ line if overridden on the command line.
+ *
+ */
+
+/* settings for DTC3181E card with only Mustek scanner attached */
+#define USLEEP_POLL msecs_to_jiffies(10)
+#define USLEEP_SLEEP msecs_to_jiffies(200)
+#define USLEEP_WAITLONG msecs_to_jiffies(5000)
+
+#define AUTOPROBE_IRQ
+
+#ifdef CONFIG_SCSI_GENERIC_NCR53C400
+#define NCR53C400_PSEUDO_DMA 1
+#define PSEUDO_DMA
+#define NCR53C400
+#endif
+
+#include <asm/io.h>
+#include <linux/signal.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_host.h>
+#include "g_NCR5380.h"
+#include "NCR5380.h"
+#include <linux/stat.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/isapnp.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#define NCR_NOT_SET 0
+static int ncr_irq = NCR_NOT_SET;
+static int ncr_dma = NCR_NOT_SET;
+static int ncr_addr = NCR_NOT_SET;
+static int ncr_5380 = NCR_NOT_SET;
+static int ncr_53c400 = NCR_NOT_SET;
+static int ncr_53c400a = NCR_NOT_SET;
+static int dtc_3181e = NCR_NOT_SET;
+
+static struct override {
+ NCR5380_map_type NCR5380_map_name;
+ int irq;
+ int dma;
+ int board; /* Use NCR53c400, Ricoh, etc. extensions ? */
+} overrides
+#ifdef GENERIC_NCR5380_OVERRIDE
+[] __initdata = GENERIC_NCR5380_OVERRIDE;
+#else
+[1] __initdata = { { 0,},};
+#endif
+
+#define NO_OVERRIDES ARRAY_SIZE(overrides)
+
+#ifndef MODULE
+
+/**
+ * internal_setup - handle lilo command string override
+ * @board: BOARD_* identifier for the board
+ * @str: unused
+ * @ints: numeric parameters
+ *
+ * Do LILO command line initialization of the overrides array. Display
+ * errors when needed
+ *
+ * Locks: none
+ */
+
+static void __init internal_setup(int board, char *str, int *ints)
+{
+ static int commandline_current = 0;
+ switch (board) {
+ case BOARD_NCR5380:
+ if (ints[0] != 2 && ints[0] != 3) {
+ printk(KERN_ERR "generic_NCR5380_setup : usage ncr5380=" STRVAL(NCR5380_map_name) ",irq,dma\n");
+ return;
+ }
+ break;
+ case BOARD_NCR53C400:
+ if (ints[0] != 2) {
+ printk(KERN_ERR "generic_NCR53C400_setup : usage ncr53c400=" STRVAL(NCR5380_map_name) ",irq\n");
+ return;
+ }
+ break;
+ case BOARD_NCR53C400A:
+ if (ints[0] != 2) {
+ printk(KERN_ERR "generic_NCR53C400A_setup : usage ncr53c400a=" STRVAL(NCR5380_map_name) ",irq\n");
+ return;
+ }
+ break;
+ case BOARD_DTC3181E:
+ if (ints[0] != 2) {
+ printk("generic_DTC3181E_setup : usage dtc3181e=" STRVAL(NCR5380_map_name) ",irq\n");
+ return;
+ }
+ break;
+ }
+
+ if (commandline_current < NO_OVERRIDES) {
+ overrides[commandline_current].NCR5380_map_name = (NCR5380_map_type) ints[1];
+ overrides[commandline_current].irq = ints[2];
+ if (ints[0] == 3)
+ overrides[commandline_current].dma = ints[3];
+ else
+ overrides[commandline_current].dma = DMA_NONE;
+ overrides[commandline_current].board = board;
+ ++commandline_current;
+ }
+}
+
+
+/**
+ * do_NCR53C80_setup - set up entry point
+ * @str: unused
+ *
+ * Setup function invoked at boot to parse the ncr5380= command
+ * line.
+ */
+
+static int __init do_NCR5380_setup(char *str)
+{
+ int ints[10];
+
+ get_options(str, ARRAY_SIZE(ints), ints);
+ internal_setup(BOARD_NCR5380, str, ints);
+ return 1;
+}
+
+/**
+ * do_NCR53C400_setup - set up entry point
+ * @str: unused
+ * @ints: integer parameters from kernel setup code
+ *
+ * Setup function invoked at boot to parse the ncr53c400= command
+ * line.
+ */
+
+static int __init do_NCR53C400_setup(char *str)
+{
+ int ints[10];
+
+ get_options(str, ARRAY_SIZE(ints), ints);
+ internal_setup(BOARD_NCR53C400, str, ints);
+ return 1;
+}
+
+/**
+ * do_NCR53C400A_setup - set up entry point
+ * @str: unused
+ * @ints: integer parameters from kernel setup code
+ *
+ * Setup function invoked at boot to parse the ncr53c400a= command
+ * line.
+ */
+
+static int __init do_NCR53C400A_setup(char *str)
+{
+ int ints[10];
+
+ get_options(str, ARRAY_SIZE(ints), ints);
+ internal_setup(BOARD_NCR53C400A, str, ints);
+ return 1;
+}
+
+/**
+ * do_DTC3181E_setup - set up entry point
+ * @str: unused
+ * @ints: integer parameters from kernel setup code
+ *
+ * Setup function invoked at boot to parse the dtc3181e= command
+ * line.
+ */
+
+static int __init do_DTC3181E_setup(char *str)
+{
+ int ints[10];
+
+ get_options(str, ARRAY_SIZE(ints), ints);
+ internal_setup(BOARD_DTC3181E, str, ints);
+ return 1;
+}
+
+#endif
+
+/**
+ * generic_NCR5380_detect - look for NCR5380 controllers
+ * @tpnt: the scsi template
+ *
+ * Scan for the present of NCR5380, NCR53C400, NCR53C400A, DTC3181E
+ * and DTC436(ISAPnP) controllers. If overrides have been set we use
+ * them.
+ *
+ * The caller supplied NCR5380_init function is invoked from here, before
+ * the interrupt line is taken.
+ *
+ * Locks: none
+ */
+
+static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
+{
+ static int current_override = 0;
+ int count;
+ unsigned int *ports;
+#ifndef SCSI_G_NCR5380_MEM
+ int i;
+ unsigned long region_size = 16;
+#endif
+ static unsigned int __initdata ncr_53c400a_ports[] = {
+ 0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
+ };
+ static unsigned int __initdata dtc_3181e_ports[] = {
+ 0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
+ };
+ int flags = 0;
+ struct Scsi_Host *instance;
+#ifdef SCSI_G_NCR5380_MEM
+ unsigned long base;
+ void __iomem *iomem;
+#endif
+
+ if (ncr_irq != NCR_NOT_SET)
+ overrides[0].irq = ncr_irq;
+ if (ncr_dma != NCR_NOT_SET)
+ overrides[0].dma = ncr_dma;
+ if (ncr_addr != NCR_NOT_SET)
+ overrides[0].NCR5380_map_name = (NCR5380_map_type) ncr_addr;
+ if (ncr_5380 != NCR_NOT_SET)
+ overrides[0].board = BOARD_NCR5380;
+ else if (ncr_53c400 != NCR_NOT_SET)
+ overrides[0].board = BOARD_NCR53C400;
+ else if (ncr_53c400a != NCR_NOT_SET)
+ overrides[0].board = BOARD_NCR53C400A;
+ else if (dtc_3181e != NCR_NOT_SET)
+ overrides[0].board = BOARD_DTC3181E;
+#ifndef SCSI_G_NCR5380_MEM
+ if (!current_override && isapnp_present()) {
+ struct pnp_dev *dev = NULL;
+ count = 0;
+ while ((dev = pnp_find_dev(NULL, ISAPNP_VENDOR('D', 'T', 'C'), ISAPNP_FUNCTION(0x436e), dev))) {
+ if (count >= NO_OVERRIDES)
+ break;
+ if (pnp_device_attach(dev) < 0)
+ continue;
+ if (pnp_activate_dev(dev) < 0) {
+ printk(KERN_ERR "dtc436e probe: activate failed\n");
+ pnp_device_detach(dev);
+ continue;
+ }
+ if (!pnp_port_valid(dev, 0)) {
+ printk(KERN_ERR "dtc436e probe: no valid port\n");
+ pnp_device_detach(dev);
+ continue;
+ }
+ if (pnp_irq_valid(dev, 0))
+ overrides[count].irq = pnp_irq(dev, 0);
+ else
+ overrides[count].irq = NO_IRQ;
+ if (pnp_dma_valid(dev, 0))
+ overrides[count].dma = pnp_dma(dev, 0);
+ else
+ overrides[count].dma = DMA_NONE;
+ overrides[count].NCR5380_map_name = (NCR5380_map_type) pnp_port_start(dev, 0);
+ overrides[count].board = BOARD_DTC3181E;
+ count++;
+ }
+ }
+#endif
+ tpnt->proc_name = "g_NCR5380";
+
+ for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
+ if (!(overrides[current_override].NCR5380_map_name))
+ continue;
+
+ ports = NULL;
+ switch (overrides[current_override].board) {
+ case BOARD_NCR5380:
+ flags = FLAG_NO_PSEUDO_DMA;
+ break;
+ case BOARD_NCR53C400:
+ flags = FLAG_NCR53C400;
+ break;
+ case BOARD_NCR53C400A:
+ flags = FLAG_NO_PSEUDO_DMA;
+ ports = ncr_53c400a_ports;
+ break;
+ case BOARD_DTC3181E:
+ flags = FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E;
+ ports = dtc_3181e_ports;
+ break;
+ }
+
+#ifndef SCSI_G_NCR5380_MEM
+ if (ports) {
+ /* wakeup sequence for the NCR53C400A and DTC3181E */
+
+ /* Disable the adapter and look for a free io port */
+ outb(0x59, 0x779);
+ outb(0xb9, 0x379);
+ outb(0xc5, 0x379);
+ outb(0xae, 0x379);
+ outb(0xa6, 0x379);
+ outb(0x00, 0x379);
+
+ if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
+ for (i = 0; ports[i]; i++) {
+ if (!request_region(ports[i], 16, "ncr53c80"))
+ continue;
+ if (overrides[current_override].NCR5380_map_name == ports[i])
+ break;
+ release_region(ports[i], 16);
+ } else
+ for (i = 0; ports[i]; i++) {
+ if (!request_region(ports[i], 16, "ncr53c80"))
+ continue;
+ if (inb(ports[i]) == 0xff)
+ break;
+ release_region(ports[i], 16);
+ }
+ if (ports[i]) {
+ /* At this point we have our region reserved */
+ outb(0x59, 0x779);
+ outb(0xb9, 0x379);
+ outb(0xc5, 0x379);
+ outb(0xae, 0x379);
+ outb(0xa6, 0x379);
+ outb(0x80 | i, 0x379); /* set io port to be used */
+ outb(0xc0, ports[i] + 9);
+ if (inb(ports[i] + 9) != 0x80)
+ continue;
+ else
+ overrides[current_override].NCR5380_map_name = ports[i];
+ } else
+ continue;
+ }
+ else
+ {
+ /* Not a 53C400A style setup - just grab */
+ if(!(request_region(overrides[current_override].NCR5380_map_name, NCR5380_region_size, "ncr5380")))
+ continue;
+ region_size = NCR5380_region_size;
+ }
+#else
+ base = overrides[current_override].NCR5380_map_name;
+ if (!request_mem_region(base, NCR5380_region_size, "ncr5380"))
+ continue;
+ iomem = ioremap(base, NCR5380_region_size);
+ if (!iomem) {
+ release_mem_region(base, NCR5380_region_size);
+ continue;
+ }
+#endif
+ instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
+ if (instance == NULL) {
+#ifndef SCSI_G_NCR5380_MEM
+ release_region(overrides[current_override].NCR5380_map_name, region_size);
+#else
+ iounmap(iomem);
+ release_mem_region(base, NCR5380_region_size);
+#endif
+ continue;
+ }
+
+ instance->NCR5380_instance_name = overrides[current_override].NCR5380_map_name;
+#ifndef SCSI_G_NCR5380_MEM
+ instance->n_io_port = region_size;
+#else
+ ((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
+#endif
+
+ NCR5380_init(instance, flags);
+
+ if (overrides[current_override].irq != IRQ_AUTO)
+ instance->irq = overrides[current_override].irq;
+ else
+ instance->irq = NCR5380_probe_irq(instance, 0xffff);
+
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
+ if (instance->irq != NO_IRQ)
+ if (request_irq(instance->irq, generic_NCR5380_intr,
+ 0, "NCR5380", instance)) {
+ printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
+ instance->irq = NO_IRQ;
+ }
+
+ if (instance->irq == NO_IRQ) {
+ printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
+ printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
+ }
+
+ ++current_override;
+ ++count;
+ }
+ return count;
+}
+
+/**
+ * generic_NCR5380_release_resources - free resources
+ * @instance: host adapter to clean up
+ *
+ * Free the generic interface resources from this adapter.
+ *
+ * Locks: none
+ */
+
+static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
+{
+ NCR5380_local_declare();
+ NCR5380_setup(instance);
+
+ if (instance->irq != NO_IRQ)
+ free_irq(instance->irq, instance);
+ NCR5380_exit(instance);
+
+#ifndef SCSI_G_NCR5380_MEM
+ release_region(instance->NCR5380_instance_name, instance->n_io_port);
+#else
+ iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem);
+ release_mem_region(instance->NCR5380_instance_name, NCR5380_region_size);
+#endif
+
+
+ return 0;
+}
+
+#ifdef BIOSPARAM
+/**
+ * generic_NCR5380_biosparam
+ * @disk: disk to compute geometry for
+ * @dev: device identifier for this disk
+ * @ip: sizes to fill in
+ *
+ * Generates a BIOS / DOS compatible H-C-S mapping for the specified
+ * device / size.
+ *
+ * XXX Most SCSI boards use this mapping, I could be incorrect. Someone
+ * using hard disks on a trantor should verify that this mapping
+ * corresponds to that used by the BIOS / ASPI driver by running the linux
+ * fdisk program and matching the H_C_S coordinates to what DOS uses.
+ *
+ * Locks: none
+ */
+
+static int
+generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int *ip)
+{
+ ip[0] = 64;
+ ip[1] = 32;
+ ip[2] = capacity >> 11;
+ return 0;
+}
+#endif
+
+#ifdef NCR53C400_PSEUDO_DMA
+
+/**
+ * NCR5380_pread - pseudo DMA read
+ * @instance: adapter to read from
+ * @dst: buffer to read into
+ * @len: buffer length
+ *
+ * Perform a pseudo DMA mode read from an NCR53C400 or equivalent
+ * controller
+ */
+
+static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
+{
+ int blocks = len / 128;
+ int start = 0;
+ int bl;
+
+ NCR5380_local_declare();
+ NCR5380_setup(instance);
+
+ NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR);
+ NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+ while (1) {
+ if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+ break;
+ }
+ if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+ printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
+ return -1;
+ }
+ while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY);
+
+#ifndef SCSI_G_NCR5380_MEM
+ {
+ int i;
+ for (i = 0; i < 128; i++)
+ dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
+ }
+#else
+ /* implies SCSI_G_NCR5380_MEM */
+ memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
+#endif
+ start += 128;
+ blocks--;
+ }
+
+ if (blocks) {
+ while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ {
+ // FIXME - no timeout
+ }
+
+#ifndef SCSI_G_NCR5380_MEM
+ {
+ int i;
+ for (i = 0; i < 128; i++)
+ dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
+ }
+#else
+ /* implies SCSI_G_NCR5380_MEM */
+ memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
+#endif
+ start += 128;
+ blocks--;
+ }
+
+ if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
+ printk("53C400r: no 53C80 gated irq after transfer");
+
+#if 0
+ /*
+ * DON'T DO THIS - THEY NEVER ARRIVE!
+ */
+ printk("53C400r: Waiting for 53C80 registers\n");
+ while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG)
+ ;
+#endif
+ if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
+ printk(KERN_ERR "53C400r: no end dma signal\n");
+
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ return 0;
+}
+
+/**
+ * NCR5380_write - pseudo DMA write
+ * @instance: adapter to read from
+ * @dst: buffer to read into
+ * @len: buffer length
+ *
+ * Perform a pseudo DMA mode read from an NCR53C400 or equivalent
+ * controller
+ */
+
+static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
+{
+ int blocks = len / 128;
+ int start = 0;
+ int bl;
+ int i;
+
+ NCR5380_local_declare();
+ NCR5380_setup(instance);
+
+ NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
+ NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+ while (1) {
+ if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+ printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
+ return -1;
+ }
+
+ if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+ break;
+ }
+ while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ ; // FIXME - timeout
+#ifndef SCSI_G_NCR5380_MEM
+ {
+ for (i = 0; i < 128; i++)
+ NCR5380_write(C400_HOST_BUFFER, src[start + i]);
+ }
+#else
+ /* implies SCSI_G_NCR5380_MEM */
+ memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
+#endif
+ start += 128;
+ blocks--;
+ }
+ if (blocks) {
+ while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ ; // FIXME - no timeout
+
+#ifndef SCSI_G_NCR5380_MEM
+ {
+ for (i = 0; i < 128; i++)
+ NCR5380_write(C400_HOST_BUFFER, src[start + i]);
+ }
+#else
+ /* implies SCSI_G_NCR5380_MEM */
+ memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
+#endif
+ start += 128;
+ blocks--;
+ }
+
+#if 0
+ printk("53C400w: waiting for registers to be available\n");
+ THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG);
+ printk("53C400w: Got em\n");
+#endif
+
+ /* Let's wait for this instead - could be ugly */
+ /* All documentation says to check for this. Maybe my hardware is too
+ * fast. Waiting for it seems to work fine! KLL
+ */
+ while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
+ ; // FIXME - no timeout
+
+ /*
+ * I know. i is certainly != 0 here but the loop is new. See previous
+ * comment.
+ */
+ if (i) {
+ if (!((i = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_END_DMA_TRANSFER))
+ printk(KERN_ERR "53C400w: No END OF DMA bit - WHOOPS! BASR=%0x\n", i);
+ } else
+ printk(KERN_ERR "53C400w: no 53C80 gated irq after transfer (last block)\n");
+
+#if 0
+ if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) {
+ printk(KERN_ERR "53C400w: no end dma signal\n");
+ }
+#endif
+ while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
+ ; // TIMEOUT
+ return 0;
+}
+#endif /* PSEUDO_DMA */
+
+/*
+ * Include the NCR5380 core code that we build our driver around
+ */
+
+#include "NCR5380.c"
+
+static struct scsi_host_template driver_template = {
+ .show_info = generic_NCR5380_show_info,
+ .name = "Generic NCR5380/NCR53C400 SCSI",
+ .detect = generic_NCR5380_detect,
+ .release = generic_NCR5380_release_resources,
+ .info = generic_NCR5380_info,
+ .queuecommand = generic_NCR5380_queue_command,
+ .eh_abort_handler = generic_NCR5380_abort,
+ .eh_bus_reset_handler = generic_NCR5380_bus_reset,
+ .bios_param = NCR5380_BIOSPARAM,
+ .can_queue = CAN_QUEUE,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = CMD_PER_LUN,
+ .use_clustering = DISABLE_CLUSTERING,
+};
+#include <linux/module.h>
+#include "scsi_module.c"
+
+module_param(ncr_irq, int, 0);
+module_param(ncr_dma, int, 0);
+module_param(ncr_addr, int, 0);
+module_param(ncr_5380, int, 0);
+module_param(ncr_53c400, int, 0);
+module_param(ncr_53c400a, int, 0);
+module_param(dtc_3181e, int, 0);
+MODULE_LICENSE("GPL");
+
+#if !defined(SCSI_G_NCR5380_MEM) && defined(MODULE)
+static struct isapnp_device_id id_table[] = {
+ {
+ ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+ ISAPNP_VENDOR('D', 'T', 'C'), ISAPNP_FUNCTION(0x436e),
+ 0},
+ {0}
+};
+
+MODULE_DEVICE_TABLE(isapnp, id_table);
+#endif
+
+__setup("ncr5380=", do_NCR5380_setup);
+__setup("ncr53c400=", do_NCR53C400_setup);
+__setup("ncr53c400a=", do_NCR53C400A_setup);
+__setup("dtc3181e=", do_DTC3181E_setup);