Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 41 insertions, 6 deletions

diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 27debb363..ae5beda1b 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -33,12 +33,38 @@ struct access_method {
 	unsigned long (*command_completed)(struct ctlr_info *h, u8 q);
 };
 
+/* for SAS hosts and SAS expanders */
+struct hpsa_sas_node {
+	struct device *parent_dev;
+	struct list_head port_list_head;
+};
+
+struct hpsa_sas_port {
+	struct list_head port_list_entry;
+	u64 sas_address;
+	struct sas_port *port;
+	int next_phy_index;
+	struct list_head phy_list_head;
+	struct hpsa_sas_node *parent_node;
+	struct sas_rphy *rphy;
+};
+
+struct hpsa_sas_phy {
+	struct list_head phy_list_entry;
+	struct sas_phy *phy;
+	struct hpsa_sas_port *parent_port;
+	bool added_to_port;
+};
+
 struct hpsa_scsi_dev_t {
-	int devtype;
+	unsigned int devtype;
 	int bus, target, lun;		/* as presented to the OS */
 	unsigned char scsi3addr[8];	/* as presented to the HW */
+	u8 physical_device : 1;
+	u8 expose_device;
 #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
 	unsigned char device_id[16];    /* from inquiry pg. 0x83 */
+	u64 sas_address;
 	unsigned char vendor[8];        /* bytes 8-15 of inquiry data */
 	unsigned char model[16];        /* bytes 16-31 of inquiry data */
 	unsigned char raid_level;	/* from inquiry page 0xC1 */
@@ -75,11 +101,8 @@ struct hpsa_scsi_dev_t {
 	struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
 	int nphysical_disks;
 	int supports_aborts;
-#define HPSA_DO_NOT_EXPOSE	0x0
-#define HPSA_SG_ATTACH		0x1
-#define HPSA_ULD_ATTACH		0x2
-#define HPSA_SCSI_ADD		(HPSA_SG_ATTACH | HPSA_ULD_ATTACH)
-	u8 expose_state;
+	struct hpsa_sas_port *sas_port;
+	int external;   /* 1-from external array 0-not <0-unknown */
 };
 
 struct reply_queue_buffer {
@@ -136,6 +159,7 @@ struct ctlr_info {
 	char    *product_name;
 	struct pci_dev *pdev;
 	u32	board_id;
+	u64	sas_address;
 	void __iomem *vaddr;
 	unsigned long paddr;
 	int 	nr_cmds; /* Number of commands allowed on this controller */
@@ -262,7 +286,10 @@ struct ctlr_info {
 	spinlock_t offline_device_lock;
 	struct list_head offline_device_list;
 	int	acciopath_status;
+	int	drv_req_rescan;
 	int	raid_offload_debug;
+	int     discovery_polling;
+	struct  ReportLUNdata *lastlogicals;
 	int	needs_abort_tags_swizzled;
 	struct workqueue_struct *resubmit_wq;
 	struct workqueue_struct *rescan_ctlr_wq;
@@ -270,6 +297,8 @@ struct ctlr_info {
 	wait_queue_head_t abort_cmd_wait_queue;
 	wait_queue_head_t event_sync_wait_queue;
 	struct mutex reset_mutex;
+	u8 reset_in_progress;
+	struct hpsa_sas_node *sas_host;
 };
 
 struct offline_device_entry {
@@ -283,6 +312,7 @@ struct offline_device_entry {
 #define HPSA_RESET_TYPE_BUS 0x01
 #define HPSA_RESET_TYPE_TARGET 0x03
 #define HPSA_RESET_TYPE_LUN 0x04
+#define HPSA_PHYS_TARGET_RESET 0x99 /* not defined by cciss spec */
 #define HPSA_MSG_SEND_RETRY_LIMIT 10
 #define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)
 
@@ -367,6 +397,11 @@ struct offline_device_entry {
 #define IOACCEL2_INBOUND_POSTQ_64_LOW	0xd0
 #define IOACCEL2_INBOUND_POSTQ_64_HI	0xd4
 
+#define HPSA_PHYSICAL_DEVICE_BUS	0
+#define HPSA_RAID_VOLUME_BUS		1
+#define HPSA_EXTERNAL_RAID_VOLUME_BUS	2
+#define HPSA_HBA_BUS			3
+
 /*
 	Send the command to the hardware
 */