Linux-libre 4.5-gnu

1 files changed, 33 insertions, 15 deletions

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index f6446d759..343ae9482 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4572,19 +4572,27 @@ LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1,
 	     255, "Identifies TYPE for additional ring configuration");
 
 /*
-# lpfc_fdmi_on: controls FDMI support.
-#               Set                NOT Set
-#       bit 0 = FDMI support       no FDMI support
-#           LPFC_FDMI_SUPPORT just turns basic support on/off
-#       bit 1 = Register delay     no register delay  (60 seconds)
-#           LPFC_FDMI_REG_DELAY	60 sec registration delay after FDMI login
-#       bit 2 = All attributes     Use a attribute subset
-#           LPFC_FDMI_ALL_ATTRIB applies to both port and HBA attributes
-#           Port attrutes subset: 1 thru 6 OR all: 1 thru 0xd 0x101 0x102 0x103
-#           HBA attributes subset: 1 thru 0xb OR all: 1 thru 0xc
-# Value range [0,7]. Default value is 0.
+# lpfc_enable_SmartSAN: Sets up FDMI support for SmartSAN
+#       0  = SmartSAN functionality disabled (default)
+#       1  = SmartSAN functionality enabled
+# This parameter will override the value of lpfc_fdmi_on module parameter.
+# Value range is [0,1]. Default value is 0.
 */
-LPFC_VPORT_ATTR_RW(fdmi_on, 0, 0, 7, "Enable FDMI support");
+LPFC_ATTR_R(enable_SmartSAN, 0, 0, 1, "Enable SmartSAN functionality");
+
+/*
+# lpfc_fdmi_on: Controls FDMI support.
+#       0       No FDMI support (default)
+#       1       Traditional FDMI support
+#       2       Smart SAN support
+# If lpfc_enable_SmartSAN is set 1, the driver sets lpfc_fdmi_on to value 2
+# overwriting the current value.  If lpfc_enable_SmartSAN is set 0, the
+# driver uses the current value of lpfc_fdmi_on provided it has value 0 or 1.
+# A value of 2 with lpfc_enable_SmartSAN set to 0 causes the driver to
+# set lpfc_fdmi_on back to 1.
+# Value range [0,2]. Default value is 0.
+*/
+LPFC_ATTR_R(fdmi_on, 0, 0, 2, "Enable FDMI support");
 
 /*
 # Specifies the maximum number of ELS cmds we can have outstanding (for
@@ -4815,6 +4823,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_multi_ring_rctl,
 	&dev_attr_lpfc_multi_ring_type,
 	&dev_attr_lpfc_fdmi_on,
+	&dev_attr_lpfc_enable_SmartSAN,
 	&dev_attr_lpfc_max_luns,
 	&dev_attr_lpfc_enable_npiv,
 	&dev_attr_lpfc_fcf_failover_policy,
@@ -4887,7 +4896,6 @@ struct device_attribute *lpfc_vport_attrs[] = {
 	&dev_attr_lpfc_fcp_class,
 	&dev_attr_lpfc_use_adisc,
 	&dev_attr_lpfc_first_burst_size,
-	&dev_attr_lpfc_fdmi_on,
 	&dev_attr_lpfc_max_luns,
 	&dev_attr_nport_evt_cnt,
 	&dev_attr_npiv_info,
@@ -5247,7 +5255,7 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
 
 	spin_lock_irq(shost->host_lock);
 
-	if (lpfc_is_link_up(phba)) {
+	if ((lpfc_is_link_up(phba)) && (!(phba->hba_flag & HBA_FCOE_MODE))) {
 		switch(phba->fc_linkspeed) {
 		case LPFC_LINK_SPEED_1GHZ:
 			fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
@@ -5826,6 +5834,8 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
 	lpfc_fcf_failover_policy_init(phba, lpfc_fcf_failover_policy);
 	lpfc_enable_rrq_init(phba, lpfc_enable_rrq);
+	lpfc_fdmi_on_init(phba, lpfc_fdmi_on);
+	lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN);
 	lpfc_use_msi_init(phba, lpfc_use_msi);
 	lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
 	lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map);
@@ -5846,6 +5856,15 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 		phba->cfg_poll = 0;
 	else
 		phba->cfg_poll = lpfc_poll;
+
+	/* Ensure fdmi_on and enable_SmartSAN don't conflict */
+	if (phba->cfg_enable_SmartSAN) {
+		phba->cfg_fdmi_on = LPFC_FDMI_SMART_SAN;
+	} else {
+		if (phba->cfg_fdmi_on == LPFC_FDMI_SMART_SAN)
+			phba->cfg_fdmi_on = LPFC_FDMI_SUPPORT;
+	}
+
 	phba->cfg_soft_wwnn = 0L;
 	phba->cfg_soft_wwpn = 0L;
 	lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
@@ -5879,7 +5898,6 @@ lpfc_get_vport_cfgparam(struct lpfc_vport *vport)
 	lpfc_use_adisc_init(vport, lpfc_use_adisc);
 	lpfc_first_burst_size_init(vport, lpfc_first_burst_size);
 	lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time);
-	lpfc_fdmi_on_init(vport, lpfc_fdmi_on);
 	lpfc_discovery_threads_init(vport, lpfc_discovery_threads);
 	lpfc_max_luns_init(vport, lpfc_max_luns);
 	lpfc_scan_down_init(vport, lpfc_scan_down);