Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 0 insertions, 419 deletions

diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
deleted file mode 100644
index 46b2fc5b7..000000000
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- * Management Module Support for MPT (Message Passing Technology) based
- * controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h
- * Copyright (C) 2007-2014  LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
- * USA.
- */
-
-#ifndef MPT2SAS_CTL_H_INCLUDED
-#define MPT2SAS_CTL_H_INCLUDED
-
-#ifdef __KERNEL__
-#include <linux/miscdevice.h>
-#endif
-
-#define MPT2SAS_DEV_NAME	"mpt2ctl"
-#define MPT2_MAGIC_NUMBER	'L'
-#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
-
-/**
- * IOCTL opcodes
- */
-#define MPT2IOCINFO	_IOWR(MPT2_MAGIC_NUMBER, 17, \
-    struct mpt2_ioctl_iocinfo)
-#define MPT2COMMAND	_IOWR(MPT2_MAGIC_NUMBER, 20, \
-    struct mpt2_ioctl_command)
-#ifdef CONFIG_COMPAT
-#define MPT2COMMAND32	_IOWR(MPT2_MAGIC_NUMBER, 20, \
-    struct mpt2_ioctl_command32)
-#endif
-#define MPT2EVENTQUERY	_IOWR(MPT2_MAGIC_NUMBER, 21, \
-    struct mpt2_ioctl_eventquery)
-#define MPT2EVENTENABLE	_IOWR(MPT2_MAGIC_NUMBER, 22, \
-    struct mpt2_ioctl_eventenable)
-#define MPT2EVENTREPORT	_IOWR(MPT2_MAGIC_NUMBER, 23, \
-    struct mpt2_ioctl_eventreport)
-#define MPT2HARDRESET	_IOWR(MPT2_MAGIC_NUMBER, 24, \
-    struct mpt2_ioctl_diag_reset)
-#define MPT2BTDHMAPPING	_IOWR(MPT2_MAGIC_NUMBER, 31, \
-    struct mpt2_ioctl_btdh_mapping)
-
-/* diag buffer support */
-#define MPT2DIAGREGISTER _IOWR(MPT2_MAGIC_NUMBER, 26, \
-    struct mpt2_diag_register)
-#define MPT2DIAGRELEASE	_IOWR(MPT2_MAGIC_NUMBER, 27, \
-    struct mpt2_diag_release)
-#define MPT2DIAGUNREGISTER _IOWR(MPT2_MAGIC_NUMBER, 28, \
-    struct mpt2_diag_unregister)
-#define MPT2DIAGQUERY	_IOWR(MPT2_MAGIC_NUMBER, 29, \
-    struct mpt2_diag_query)
-#define MPT2DIAGREADBUFFER _IOWR(MPT2_MAGIC_NUMBER, 30, \
-    struct mpt2_diag_read_buffer)
-
-/**
- * struct mpt2_ioctl_header - main header structure
- * @ioc_number -  IOC unit number
- * @port_number - IOC port number
- * @max_data_size - maximum number bytes to transfer on read
- */
-struct mpt2_ioctl_header {
-	uint32_t ioc_number;
-	uint32_t port_number;
-	uint32_t max_data_size;
-};
-
-/**
- * struct mpt2_ioctl_diag_reset - diagnostic reset
- * @hdr - generic header
- */
-struct mpt2_ioctl_diag_reset {
-	struct mpt2_ioctl_header hdr;
-};
-
-
-/**
- * struct mpt2_ioctl_pci_info - pci device info
- * @device - pci device id
- * @function - pci function id
- * @bus - pci bus id
- * @segment_id - pci segment id
- */
-struct mpt2_ioctl_pci_info {
-	union {
-		struct {
-			uint32_t device:5;
-			uint32_t function:3;
-			uint32_t bus:24;
-		} bits;
-		uint32_t  word;
-	} u;
-	uint32_t segment_id;
-};
-
-
-#define MPT2_IOCTL_INTERFACE_SCSI	(0x00)
-#define MPT2_IOCTL_INTERFACE_FC		(0x01)
-#define MPT2_IOCTL_INTERFACE_FC_IP	(0x02)
-#define MPT2_IOCTL_INTERFACE_SAS	(0x03)
-#define MPT2_IOCTL_INTERFACE_SAS2	(0x04)
-#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200	(0x05)
-#define MPT2_IOCTL_VERSION_LENGTH	(32)
-
-/**
- * struct mpt2_ioctl_iocinfo - generic controller info
- * @hdr - generic header
- * @adapter_type - type of adapter (spi, fc, sas)
- * @port_number - port number
- * @pci_id - PCI Id
- * @hw_rev - hardware revision
- * @sub_system_device - PCI subsystem Device ID
- * @sub_system_vendor - PCI subsystem Vendor ID
- * @rsvd0 - reserved
- * @firmware_version - firmware version
- * @bios_version - BIOS version
- * @driver_version - driver version - 32 ASCII characters
- * @rsvd1 - reserved
- * @scsi_id - scsi id of adapter 0
- * @rsvd2 - reserved
- * @pci_information - pci info (2nd revision)
- */
-struct mpt2_ioctl_iocinfo {
-	struct mpt2_ioctl_header hdr;
-	uint32_t adapter_type;
-	uint32_t port_number;
-	uint32_t pci_id;
-	uint32_t hw_rev;
-	uint32_t subsystem_device;
-	uint32_t subsystem_vendor;
-	uint32_t rsvd0;
-	uint32_t firmware_version;
-	uint32_t bios_version;
-	uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH];
-	uint8_t rsvd1;
-	uint8_t scsi_id;
-	uint16_t rsvd2;
-	struct mpt2_ioctl_pci_info pci_information;
-};
-
-
-/* number of event log entries */
-#define MPT2SAS_CTL_EVENT_LOG_SIZE (50)
-
-/**
- * struct mpt2_ioctl_eventquery - query event count and type
- * @hdr - generic header
- * @event_entries - number of events returned by get_event_report
- * @rsvd - reserved
- * @event_types - type of events currently being captured
- */
-struct mpt2_ioctl_eventquery {
-	struct mpt2_ioctl_header hdr;
-	uint16_t event_entries;
-	uint16_t rsvd;
-	uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
-};
-
-/**
- * struct mpt2_ioctl_eventenable - enable/disable event capturing
- * @hdr - generic header
- * @event_types - toggle off/on type of events to be captured
- */
-struct mpt2_ioctl_eventenable {
-	struct mpt2_ioctl_header hdr;
-	uint32_t event_types[4];
-};
-
-#define MPT2_EVENT_DATA_SIZE (192)
-/**
- * struct MPT2_IOCTL_EVENTS -
- * @event - the event that was reported
- * @context - unique value for each event assigned by driver
- * @data - event data returned in fw reply message
- */
-struct MPT2_IOCTL_EVENTS {
-	uint32_t event;
-	uint32_t context;
-	uint8_t data[MPT2_EVENT_DATA_SIZE];
-};
-
-/**
- * struct mpt2_ioctl_eventreport - returing event log
- * @hdr - generic header
- * @event_data - (see struct MPT2_IOCTL_EVENTS)
- */
-struct mpt2_ioctl_eventreport {
-	struct mpt2_ioctl_header hdr;
-	struct MPT2_IOCTL_EVENTS event_data[1];
-};
-
-/**
- * struct mpt2_ioctl_command - generic mpt firmware passthru ioctl
- * @hdr - generic header
- * @timeout - command timeout in seconds. (if zero then use driver default
- *  value).
- * @reply_frame_buf_ptr - reply location
- * @data_in_buf_ptr - destination for read
- * @data_out_buf_ptr - data source for write
- * @sense_data_ptr - sense data location
- * @max_reply_bytes - maximum number of reply bytes to be sent to app.
- * @data_in_size - number bytes for data transfer in (read)
- * @data_out_size - number bytes for data transfer out (write)
- * @max_sense_bytes - maximum number of bytes for auto sense buffers
- * @data_sge_offset - offset in words from the start of the request message to
- * the first SGL
- * @mf[1];
- */
-struct mpt2_ioctl_command {
-	struct mpt2_ioctl_header hdr;
-	uint32_t timeout;
-	void __user *reply_frame_buf_ptr;
-	void __user *data_in_buf_ptr;
-	void __user *data_out_buf_ptr;
-	void __user *sense_data_ptr;
-	uint32_t max_reply_bytes;
-	uint32_t data_in_size;
-	uint32_t data_out_size;
-	uint32_t max_sense_bytes;
-	uint32_t data_sge_offset;
-	uint8_t mf[1];
-};
-
-#ifdef CONFIG_COMPAT
-struct mpt2_ioctl_command32 {
-	struct mpt2_ioctl_header hdr;
-	uint32_t timeout;
-	uint32_t reply_frame_buf_ptr;
-	uint32_t data_in_buf_ptr;
-	uint32_t data_out_buf_ptr;
-	uint32_t sense_data_ptr;
-	uint32_t max_reply_bytes;
-	uint32_t data_in_size;
-	uint32_t data_out_size;
-	uint32_t max_sense_bytes;
-	uint32_t data_sge_offset;
-	uint8_t mf[1];
-};
-#endif
-
-/**
- * struct mpt2_ioctl_btdh_mapping - mapping info
- * @hdr - generic header
- * @id - target device identification number
- * @bus - SCSI bus number that the target device exists on
- * @handle - device handle for the target device
- * @rsvd - reserved
- *
- * To obtain a bus/id the application sets
- * handle to valid handle, and bus/id to 0xFFFF.
- *
- * To obtain the device handle the application sets
- * bus/id valid value, and the handle to 0xFFFF.
- */
-struct mpt2_ioctl_btdh_mapping {
-	struct mpt2_ioctl_header hdr;
-	uint32_t id;
-	uint32_t bus;
-	uint16_t handle;
-	uint16_t rsvd;
-};
-
-
-/* status bits for ioc->diag_buffer_status */
-#define MPT2_DIAG_BUFFER_IS_REGISTERED	(0x01)
-#define MPT2_DIAG_BUFFER_IS_RELEASED	(0x02)
-#define MPT2_DIAG_BUFFER_IS_DIAG_RESET	(0x04)
-
-/* application flags for mpt2_diag_register, mpt2_diag_query */
-#define MPT2_APP_FLAGS_APP_OWNED	(0x0001)
-#define MPT2_APP_FLAGS_BUFFER_VALID	(0x0002)
-#define MPT2_APP_FLAGS_FW_BUFFER_ACCESS	(0x0004)
-
-/* flags for mpt2_diag_read_buffer */
-#define MPT2_FLAGS_REREGISTER		(0x0001)
-
-#define MPT2_PRODUCT_SPECIFIC_DWORDS 		23
-
-/**
- * struct mpt2_diag_register - application register with driver
- * @hdr - generic header
- * @reserved -
- * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
- * @application_flags - misc flags
- * @diagnostic_flags - specifies flags affecting command processing
- * @product_specific - product specific information
- * @requested_buffer_size - buffers size in bytes
- * @unique_id - tag specified by application that is used to signal ownership
- *  of the buffer.
- *
- * This will allow the driver to setup any required buffers that will be
- * needed by firmware to communicate with the driver.
- */
-struct mpt2_diag_register {
-	struct mpt2_ioctl_header hdr;
-	uint8_t reserved;
-	uint8_t buffer_type;
-	uint16_t application_flags;
-	uint32_t diagnostic_flags;
-	uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
-	uint32_t requested_buffer_size;
-	uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_unregister - application unregister with driver
- * @hdr - generic header
- * @unique_id - tag uniquely identifies the buffer to be unregistered
- *
- * This will allow the driver to cleanup any memory allocated for diag
- * messages and to free up any resources.
- */
-struct mpt2_diag_unregister {
-	struct mpt2_ioctl_header hdr;
-	uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_query - query relevant info associated with diag buffers
- * @hdr - generic header
- * @reserved -
- * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
- * @application_flags - misc flags
- * @diagnostic_flags - specifies flags affecting command processing
- * @product_specific - product specific information
- * @total_buffer_size - diag buffer size in bytes
- * @driver_added_buffer_size - size of extra space appended to end of buffer
- * @unique_id - unique id associated with this buffer.
- *
- * The application will send only buffer_type and unique_id.  Driver will
- * inspect unique_id first, if valid, fill in all the info.  If unique_id is
- * 0x00, the driver will return info specified by Buffer Type.
- */
-struct mpt2_diag_query {
-	struct mpt2_ioctl_header hdr;
-	uint8_t reserved;
-	uint8_t buffer_type;
-	uint16_t application_flags;
-	uint32_t diagnostic_flags;
-	uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
-	uint32_t total_buffer_size;
-	uint32_t driver_added_buffer_size;
-	uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_release -  request to send Diag Release Message to firmware
- * @hdr - generic header
- * @unique_id - tag uniquely identifies the buffer to be released
- *
- * This allows ownership of the specified buffer to returned to the driver,
- * allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
- */
-struct mpt2_diag_release {
-	struct mpt2_ioctl_header hdr;
-	uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_read_buffer - request for copy of the diag buffer
- * @hdr - generic header
- * @status -
- * @reserved -
- * @flags - misc flags
- * @starting_offset - starting offset within drivers buffer where to start
- *  reading data at into the specified application buffer
- * @bytes_to_read - number of bytes to copy from the drivers buffer into the
- *  application buffer starting at starting_offset.
- * @unique_id - unique id associated with this buffer.
- * @diagnostic_data - data payload
- */
-struct mpt2_diag_read_buffer {
-	struct mpt2_ioctl_header hdr;
-	uint8_t status;
-	uint8_t reserved;
-	uint16_t flags;
-	uint32_t starting_offset;
-	uint32_t bytes_to_read;
-	uint32_t unique_id;
-	uint32_t diagnostic_data[1];
-};
-
-#endif /* MPT2SAS_CTL_H_INCLUDED */