Linux-libre 4.3.2-gnu

8 files changed, 703 insertions, 113 deletions

diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index c34c11579..ec27ad2d1 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
  *                 scatter/gather formats.
  * Creation Date:  June 21, 2006
  *
- * mpi2.h Version:  02.00.31
+ * mpi2.h Version:  02.00.35
  *
  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  *       prefix are for use only on MPI v2.5 products, and must not be used
@@ -88,6 +88,10 @@
  *                     Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
  * 04-09-13  02.00.30  Bumped MPI2_HEADER_VERSION_UNIT.
  * 04-17-13  02.00.31  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-19-13  02.00.32  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-05-13  02.00.33  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 01-08-14  02.00.34  Bumped MPI2_HEADER_VERSION_UNIT
+ * 06-13-14  02.00.35  Bumped MPI2_HEADER_VERSION_UNIT.
  * --------------------------------------------------------------------------
  */
 
@@ -121,7 +125,7 @@
 #define MPI2_VERSION_02_05                  (0x0205)
 
 /*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT            (0x1F)
+#define MPI2_HEADER_VERSION_UNIT            (0x23)
 #define MPI2_HEADER_VERSION_DEV             (0x00)
 #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
 #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index e261a3153..581fdb375 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
  *         Title:  MPI Configuration messages and pages
  * Creation Date:  November 10, 2006
  *
- *   mpi2_cnfg.h Version:  02.00.26
+ *   mpi2_cnfg.h Version:  02.00.29
  *
  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  *       prefix are for use only on MPI v2.5 products, and must not be used
@@ -165,6 +165,20 @@
  *                     match the specification.
  * 08-19-13  02.00.26  Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for
  *			future use.
+ * 12-05-13  02.00.27  Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
+ *		       MPI2_CONFIG_PAGE_MAN_7.
+ *		       Added EnclosureLevel and ConnectorName fields to
+ *		       MPI2_CONFIG_PAGE_SAS_DEV_0.
+ *		       Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
+ *		       MPI2_CONFIG_PAGE_SAS_DEV_0.
+ *		       Added EnclosureLevel field to
+ *		       MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ *		       Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
+ *		       MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * 01-08-14  02.00.28  Added more defines for the BiosOptions field of
+ *		       MPI2_CONFIG_PAGE_BIOS_1.
+ * 06-13-14  02.00.29  Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
+ *		       more defines for the BiosOptions field..
  * --------------------------------------------------------------------------
  */
 
@@ -724,6 +738,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
 #define MPI2_MANUFACTURING7_PAGEVERSION                 (0x01)
 
 /*defines for the Flags field */
+#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL         (0x00000008)
 #define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER       (0x00000002)
 #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO                (0x00000001)
 
@@ -1311,7 +1326,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
 	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
 	U32                     BiosOptions;                /*0x04 */
 	U32                     IOCSettings;                /*0x08 */
-	U32                     Reserved1;                  /*0x0C */
+	U8                      SSUTimeout;                 /*0x0C */
+	U8                      Reserved1;                  /*0x0D */
+	U16                     Reserved2;                  /*0x0E */
 	U32                     DeviceSettings;             /*0x10 */
 	U16                     NumberOfDevices;            /*0x14 */
 	U16                     UEFIVersion;                /*0x16 */
@@ -1323,9 +1340,24 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
 	*PTR_MPI2_CONFIG_PAGE_BIOS_1,
 	Mpi2BiosPage1_t, *pMpi2BiosPage1_t;
 
-#define MPI2_BIOSPAGE1_PAGEVERSION                      (0x05)
+#define MPI2_BIOSPAGE1_PAGEVERSION                      (0x07)
 
 /*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK                         (0x00003800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL                        (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE                   (0x00000800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID                        (0x00001000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS                        (0x00001800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY                        (0x00002000)
+
+#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS		(0x00000400)
+
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD	(0x00000300)
+#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD	(0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD	(0x00000100)
+#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD	(0x00000200)
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD	(0x00000300)
+
 #define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID                  (0x000000F0)
 #define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID                   (0x00000000)
 
@@ -2633,9 +2665,9 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
 	U8
 		ControlGroup;           /*0x2E */
 	U8
-		Reserved1;              /*0x2F */
+		EnclosureLevel;		/*0x2F */
 	U32
-		Reserved2;              /*0x30 */
+		ConnectorName[4];	/*0x30 */
 	U32
 		Reserved3;              /*0x34 */
 } MPI2_CONFIG_PAGE_SAS_DEV_0,
@@ -2643,7 +2675,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
 	Mpi2SasDevicePage0_t,
 	*pMpi2SasDevicePage0_t;
 
-#define MPI2_SASDEVICE0_PAGEVERSION         (0x08)
+#define MPI2_SASDEVICE0_PAGEVERSION         (0x09)
 
 /*values for SAS Device Page 0 AccessStatus field */
 #define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS                  (0x00)
@@ -2683,6 +2715,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
 #define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED           (0x0020)
 #define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED           (0x0010)
 #define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH         (0x0008)
+#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID             (0x0002)
 #define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT               (0x0001)
 
 
@@ -3019,8 +3052,10 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
 		NumSlots;                   /*0x18 */
 	U16
 		StartSlot;                  /*0x1A */
-	U16
+	U8
 		Reserved2;                  /*0x1C */
+	U8
+		EnclosureLevel;		    /*0x1D */
 	U16
 		SEPDevHandle;               /*0x1E */
 	U32
@@ -3031,9 +3066,10 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
 	*PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
 	Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t;
 
-#define MPI2_SASENCLOSURE0_PAGEVERSION      (0x03)
+#define MPI2_SASENCLOSURE0_PAGEVERSION      (0x04)
 
 /*values for SAS Enclosure Page 0 Flags field */
+#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID      (0x0010)
 #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK              (0x000F)
 #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN           (0x0000)
 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES           (0x0001)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index 490830957..d7598cc4b 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -6,7 +6,7 @@
  *         Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  * Creation Date:  October 11, 2006
  *
- * mpi2_ioc.h Version:  02.00.23
+ * mpi2_ioc.h Version:  02.00.24
  *
  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  *       prefix are for use only on MPI v2.5 products, and must not be used
@@ -132,6 +132,7 @@
  *			Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
  *			Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
  *			Added Encrypted Hash Extended Image.
+ * 12-05-13  02.00.24  Added MPI25_HASH_IMAGE_TYPE_BIOS.
  * --------------------------------------------------------------------------
  */
 
@@ -1598,6 +1599,7 @@ Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
 /* values for HashImageType */
 #define MPI25_HASH_IMAGE_TYPE_UNUSED		(0x00)
 #define MPI25_HASH_IMAGE_TYPE_FIRMWARE		(0x01)
+#define MPI25_HASH_IMAGE_TYPE_BIOS              (0x02)
 
 /* values for HashAlgorithm */
 #define MPI25_HASH_ALGORITHM_UNUSED		(0x00)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
index 904910d8a..1629e5bce 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
@@ -6,7 +6,7 @@
  *         Title:  MPI diagnostic tool structures and definitions
  * Creation Date:  March 26, 2007
  *
- *   mpi2_tool.h Version:  02.00.11
+ *   mpi2_tool.h Version:  02.00.12
  *
  * Version History
  * ---------------
@@ -33,6 +33,7 @@
  * 07-26-12  02.00.10  Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
  *                     it uses MPI Chain SGE as well as MPI Simple SGE.
  * 08-19-13  02.00.11  Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
+ * 01-08-14  02.00.12  Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
  * --------------------------------------------------------------------------
  */
 
@@ -100,6 +101,7 @@ typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST {
 #define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES      (0x20000000)
 #define MPI2_TOOLBOX_CLEAN_FW_CURRENT               (0x10000000)
 #define MPI2_TOOLBOX_CLEAN_FW_BACKUP                (0x08000000)
+#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC   (0x04000000)
 #define MPI2_TOOLBOX_CLEAN_MEGARAID                 (0x02000000)
 #define MPI2_TOOLBOX_CLEAN_INITIALIZATION           (0x01000000)
 #define MPI2_TOOLBOX_CLEAN_FLASH                    (0x00000004)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 14a781b6b..d4f1dcdb8 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -83,10 +83,10 @@ static int msix_disable = -1;
 module_param(msix_disable, int, 0);
 MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
 
-static int max_msix_vectors = 8;
+static int max_msix_vectors = -1;
 module_param(max_msix_vectors, int, 0);
 MODULE_PARM_DESC(max_msix_vectors,
-	" max msix vectors - (default=8)");
+	" max msix vectors");
 
 static int mpt3sas_fwfault_debug;
 MODULE_PARM_DESC(mpt3sas_fwfault_debug,
@@ -1009,8 +1009,30 @@ _base_interrupt(int irq, void *bus_id)
 	}
 
 	wmb();
-	writel(reply_q->reply_post_host_index | (msix_index <<
-	    MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex);
+
+	/* Update Reply Post Host Index.
+	 * For those HBA's which support combined reply queue feature
+	 * 1. Get the correct Supplemental Reply Post Host Index Register.
+	 *    i.e. (msix_index / 8)th entry from Supplemental Reply Post Host
+	 *    Index Register address bank i.e replyPostRegisterIndex[],
+	 * 2. Then update this register with new reply host index value
+	 *    in ReplyPostIndex field and the MSIxIndex field with
+	 *    msix_index value reduced to a value between 0 and 7,
+	 *    using a modulo 8 operation. Since each Supplemental Reply Post
+	 *    Host Index Register supports 8 MSI-X vectors.
+	 *
+	 * For other HBA's just update the Reply Post Host Index register with
+	 * new reply host index value in ReplyPostIndex Field and msix_index
+	 * value in MSIxIndex field.
+	 */
+	if (ioc->msix96_vector)
+		writel(reply_q->reply_post_host_index | ((msix_index  & 7) <<
+			MPI2_RPHI_MSIX_INDEX_SHIFT),
+			ioc->replyPostRegisterIndex[msix_index/8]);
+	else
+		writel(reply_q->reply_post_host_index | (msix_index <<
+			MPI2_RPHI_MSIX_INDEX_SHIFT),
+			&ioc->chip->ReplyPostHostIndex);
 	atomic_dec(&reply_q->busy);
 	return IRQ_HANDLED;
 }
@@ -1338,7 +1360,7 @@ _base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
 
 	sg_scmd = scsi_sglist(scmd);
 	sges_left = scsi_dma_map(scmd);
-	if (!sges_left) {
+	if (sges_left < 0) {
 		sdev_printk(KERN_ERR, scmd->device,
 			"pci_map_sg failed: request for %d bytes!\n",
 			scsi_bufflen(scmd));
@@ -1407,7 +1429,7 @@ _base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
  fill_in_last_segment:
 
 	/* fill the last segment */
-	while (sges_left) {
+	while (sges_left > 0) {
 		if (sges_left == 1)
 			_base_add_sg_single_ieee(sg_local,
 			    simple_sgl_flags_last, 0, sg_dma_len(sg_scmd),
@@ -1560,8 +1582,6 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
 
 	pci_read_config_word(ioc->pdev, base + 2, &message_control);
 	ioc->msix_vector_count = (message_control & 0x3FF) + 1;
-	if (ioc->msix_vector_count > 8)
-		ioc->msix_vector_count = 8;
 	dinitprintk(ioc, pr_info(MPT3SAS_FMT
 		"msix is supported, vector_count(%d)\n",
 		ioc->name, ioc->msix_vector_count));
@@ -1793,6 +1813,36 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
 }
 
 /**
+ * mpt3sas_base_unmap_resources - free controller resources
+ * @ioc: per adapter object
+ */
+void
+mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct pci_dev *pdev = ioc->pdev;
+
+	dexitprintk(ioc, printk(MPT3SAS_FMT "%s\n",
+		ioc->name, __func__));
+
+	_base_free_irq(ioc);
+	_base_disable_msix(ioc);
+
+	if (ioc->msix96_vector)
+		kfree(ioc->replyPostRegisterIndex);
+
+	if (ioc->chip_phys) {
+		iounmap(ioc->chip);
+		ioc->chip_phys = 0;
+	}
+
+	if (pci_is_enabled(pdev)) {
+		pci_release_selected_regions(ioc->pdev, ioc->bars);
+		pci_disable_pcie_error_reporting(pdev);
+		pci_disable_device(pdev);
+	}
+}
+
+/**
  * mpt3sas_base_map_resources - map in controller resources (io/irq/memap)
  * @ioc: per adapter object
  *
@@ -1843,7 +1893,8 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 		goto out_fail;
 	}
 
-	for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) {
+	for (i = 0, memap_sz = 0, pio_sz = 0; (i < DEVICE_COUNT_RESOURCE) &&
+	     (!memap_sz || !pio_sz); i++) {
 		if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
 			if (pio_sz)
 				continue;
@@ -1856,15 +1907,16 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 			chip_phys = (u64)ioc->chip_phys;
 			memap_sz = pci_resource_len(pdev, i);
 			ioc->chip = ioremap(ioc->chip_phys, memap_sz);
-			if (ioc->chip == NULL) {
-				pr_err(MPT3SAS_FMT "unable to map adapter memory!\n",
-					ioc->name);
-				r = -EINVAL;
-				goto out_fail;
-			}
 		}
 	}
 
+	if (ioc->chip == NULL) {
+		pr_err(MPT3SAS_FMT "unable to map adapter memory! "
+			" or resource not found\n", ioc->name);
+		r = -EINVAL;
+		goto out_fail;
+	}
+
 	_base_mask_interrupts(ioc);
 
 	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
@@ -1880,6 +1932,36 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 	if (r)
 		goto out_fail;
 
+	/* Use the Combined reply queue feature only for SAS3 C0 & higher
+	 * revision HBAs and also only when reply queue count is greater than 8
+	 */
+	if (ioc->msix96_vector && ioc->reply_queue_count > 8) {
+		/* Determine the Supplemental Reply Post Host Index Registers
+		 * Addresse. Supplemental Reply Post Host Index Registers
+		 * starts at offset MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET and
+		 * each register is at offset bytes of
+		 * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET from previous one.
+		 */
+		ioc->replyPostRegisterIndex = kcalloc(
+		     MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT,
+		     sizeof(resource_size_t *), GFP_KERNEL);
+		if (!ioc->replyPostRegisterIndex) {
+			dfailprintk(ioc, printk(MPT3SAS_FMT
+			"allocation for reply Post Register Index failed!!!\n",
+								   ioc->name));
+			r = -ENOMEM;
+			goto out_fail;
+		}
+
+		for (i = 0; i < MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT; i++) {
+			ioc->replyPostRegisterIndex[i] = (resource_size_t *)
+			     ((u8 *)&ioc->chip->Doorbell +
+			     MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET +
+			     (i * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET));
+		}
+	} else
+		ioc->msix96_vector = 0;
+
 	list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
 		pr_info(MPT3SAS_FMT "%s: IRQ %d\n",
 		    reply_q->name,  ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
@@ -1895,12 +1977,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 	return 0;
 
  out_fail:
-	if (ioc->chip_phys)
-		iounmap(ioc->chip);
-	ioc->chip_phys = 0;
-	pci_release_selected_regions(ioc->pdev, ioc->bars);
-	pci_disable_pcie_error_reporting(pdev);
-	pci_disable_device(pdev);
+	mpt3sas_base_unmap_resources(ioc);
 	return r;
 }
 
@@ -2290,6 +2367,99 @@ _base_display_intel_branding(struct MPT3SAS_ADAPTER *ioc)
 
 
 /**
+ * _base_display_dell_branding - Display branding string
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_dell_branding(struct MPT3SAS_ADAPTER *ioc)
+{
+	if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
+		return;
+
+	switch (ioc->pdev->device) {
+	case MPI25_MFGPAGE_DEVID_SAS3008:
+		switch (ioc->pdev->subsystem_device) {
+		case MPT3SAS_DELL_12G_HBA_SSDID:
+			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				MPT3SAS_DELL_12G_HBA_BRANDING);
+			break;
+		default:
+			pr_info(MPT3SAS_FMT
+			   "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
+			   ioc->pdev->subsystem_device);
+			break;
+		}
+		break;
+	default:
+		pr_info(MPT3SAS_FMT
+			"Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
+			ioc->pdev->subsystem_device);
+		break;
+	}
+}
+
+/**
+ * _base_display_cisco_branding - Display branding string
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_cisco_branding(struct MPT3SAS_ADAPTER *ioc)
+{
+	if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_CISCO)
+		return;
+
+	switch (ioc->pdev->device) {
+	case MPI25_MFGPAGE_DEVID_SAS3008:
+		switch (ioc->pdev->subsystem_device) {
+		case MPT3SAS_CISCO_12G_8E_HBA_SSDID:
+			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				MPT3SAS_CISCO_12G_8E_HBA_BRANDING);
+			break;
+		case MPT3SAS_CISCO_12G_8I_HBA_SSDID:
+			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				MPT3SAS_CISCO_12G_8I_HBA_BRANDING);
+			break;
+		case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+			break;
+		default:
+			pr_info(MPT3SAS_FMT
+			  "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+			  ioc->name, ioc->pdev->subsystem_device);
+			break;
+		}
+		break;
+	case MPI25_MFGPAGE_DEVID_SAS3108_1:
+		switch (ioc->pdev->subsystem_device) {
+		case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+			MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+			break;
+		case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID:
+			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+			MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING);
+			break;
+		default:
+			pr_info(MPT3SAS_FMT
+			 "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+			 ioc->name, ioc->pdev->subsystem_device);
+			break;
+		}
+		break;
+	default:
+		 pr_info(MPT3SAS_FMT
+			"Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+			ioc->name, ioc->pdev->subsystem_device);
+		break;
+	}
+}
+
+/**
  * _base_display_ioc_capabilities - Disply IOC's capabilities.
  * @ioc: per adapter object
  *
@@ -2319,6 +2489,8 @@ _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
 	    bios_version & 0x000000FF);
 
 	_base_display_intel_branding(ioc);
+	_base_display_dell_branding(ioc);
+	_base_display_cisco_branding(ioc);
 
 	pr_info(MPT3SAS_FMT "Protocol=(", ioc->name);
 
@@ -3137,6 +3309,9 @@ _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
  * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
  */
 static int
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
+
+static int
 _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
 	int sleep_flag)
 {
@@ -3679,6 +3854,64 @@ _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
 }
 
 /**
+ * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
+ * @ioc: per adapter object
+ * @timeout:
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
+	int sleep_flag)
+{
+	u32 ioc_state;
+	int rc;
+
+	dinitprintk(ioc, printk(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	if (ioc->pci_error_recovery) {
+		dfailprintk(ioc, printk(MPT3SAS_FMT
+		    "%s: host in pci error recovery\n", ioc->name, __func__));
+		return -EFAULT;
+	}
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+	dhsprintk(ioc, printk(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
+	    ioc->name, __func__, ioc_state));
+
+	if (((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) ||
+	    (ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
+		return 0;
+
+	if (ioc_state & MPI2_DOORBELL_USED) {
+		dhsprintk(ioc, printk(MPT3SAS_FMT
+		    "unexpected doorbell active!\n", ioc->name));
+		goto issue_diag_reset;
+	}
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+		mpt3sas_base_fault_info(ioc, ioc_state &
+		    MPI2_DOORBELL_DATA_MASK);
+		goto issue_diag_reset;
+	}
+
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
+	    timeout, sleep_flag);
+	if (ioc_state) {
+		dfailprintk(ioc, printk(MPT3SAS_FMT
+		    "%s: failed going to ready state (ioc_state=0x%x)\n",
+		    ioc->name, __func__, ioc_state));
+		return -EFAULT;
+	}
+
+ issue_diag_reset:
+	rc = _base_diag_reset(ioc, sleep_flag);
+	return rc;
+}
+
+/**
  * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
  * @ioc: per adapter object
  * @sleep_flag: CAN_SLEEP or NO_SLEEP
@@ -3696,6 +3929,13 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
 
+	r = _base_wait_for_iocstate(ioc, 10, sleep_flag);
+	if (r) {
+		dfailprintk(ioc, printk(MPT3SAS_FMT
+		    "%s: failed getting to correct state\n",
+		    ioc->name, __func__));
+		return r;
+	}
 	mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
 	mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
 	memset(&mpi_request, 0, mpi_request_sz);
@@ -3781,7 +4021,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
 	mpi_request.VF_ID = 0; /* TODO */
 	mpi_request.VP_ID = 0;
-	mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
+	mpi_request.MsgVersion = cpu_to_le16(MPI25_VERSION);
 	mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
 
 	if (_base_is_controller_msix_enabled(ioc))
@@ -4522,8 +4762,15 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 
 	/* initialize reply post host index */
 	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
-		writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT,
-		    &ioc->chip->ReplyPostHostIndex);
+		if (ioc->msix96_vector)
+			writel((reply_q->msix_index & 7)<<
+			   MPI2_RPHI_MSIX_INDEX_SHIFT,
+			   ioc->replyPostRegisterIndex[reply_q->msix_index/8]);
+		else
+			writel(reply_q->msix_index <<
+				MPI2_RPHI_MSIX_INDEX_SHIFT,
+				&ioc->chip->ReplyPostHostIndex);
+
 		if (!_base_is_controller_msix_enabled(ioc))
 			goto skip_init_reply_post_host_index;
 	}
@@ -4562,8 +4809,6 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 void
 mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
 {
-	struct pci_dev *pdev = ioc->pdev;
-
 	dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
 
@@ -4574,18 +4819,7 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
 		ioc->shost_recovery = 0;
 	}
 
-	_base_free_irq(ioc);
-	_base_disable_msix(ioc);
-
-	if (ioc->chip_phys && ioc->chip)
-		iounmap(ioc->chip);
-	ioc->chip_phys = 0;
-
-	if (pci_is_enabled(pdev)) {
-		pci_release_selected_regions(ioc->pdev, ioc->bars);
-		pci_disable_pcie_error_reporting(pdev);
-		pci_disable_device(pdev);
-	}
+	mpt3sas_base_unmap_resources(ioc);
 	return;
 }
 
@@ -4600,6 +4834,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 {
 	int r, i;
 	int cpu_id, last_cpu_id = 0;
+	u8 revision;
 
 	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
@@ -4619,6 +4854,20 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 		goto out_free_resources;
 	}
 
+	/* Check whether the controller revision is C0 or above.
+	 * only C0 and above revision controllers support 96 MSI-X vectors.
+	 */
+	revision = ioc->pdev->revision;
+
+	if ((ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3004 ||
+	     ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3008 ||
+	     ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_1 ||
+	     ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_2 ||
+	     ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_5 ||
+	     ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_6) &&
+	     (revision >= 0x02))
+		ioc->msix96_vector = 1;
+
 	ioc->rdpq_array_enable_assigned = 0;
 	ioc->dma_mask = 0;
 	r = mpt3sas_base_map_resources(ioc);
@@ -4641,7 +4890,6 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
 	ioc->build_sg = &_base_build_sg_ieee;
 	ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
-	ioc->mpi25 = 1;
 	ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
 
 	/*
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index afa881682..f0e462b08 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -71,8 +71,8 @@
 #define MPT3SAS_DRIVER_NAME		"mpt3sas"
 #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
 #define MPT3SAS_DESCRIPTION	"LSI MPT Fusion SAS 3.0 Device Driver"
-#define MPT3SAS_DRIVER_VERSION		"04.100.00.00"
-#define MPT3SAS_MAJOR_VERSION		4
+#define MPT3SAS_DRIVER_VERSION		"09.100.00.00"
+#define MPT3SAS_MAJOR_VERSION		9
 #define MPT3SAS_MINOR_VERSION		100
 #define MPT3SAS_BUILD_VERSION		0
 #define MPT3SAS_RELEASE_VERSION	00
@@ -152,12 +152,49 @@
 #define MPT3SAS_INTEL_RS3UC080_SSDID    0x3524
 
 /*
+ * Dell HBA branding
+ */
+#define MPT3SAS_DELL_12G_HBA_BRANDING       \
+	"Dell 12Gbps HBA"
+
+/*
+ * Dell HBA SSDIDs
+ */
+#define MPT3SAS_DELL_12G_HBA_SSDID	0x1F46
+
+/*
+ * Cisco HBA branding
+ */
+#define MPT3SAS_CISCO_12G_8E_HBA_BRANDING		\
+		"Cisco 9300-8E 12G SAS HBA"
+#define MPT3SAS_CISCO_12G_8I_HBA_BRANDING		\
+		"Cisco 9300-8i 12G SAS HBA"
+#define MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING	\
+		"Cisco 12G Modular SAS Pass through Controller"
+#define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING		\
+		"UCS C3X60 12G SAS Pass through Controller"
+/*
+ * Cisco HBA SSSDIDs
+ */
+#define MPT3SAS_CISCO_12G_8E_HBA_SSDID  0x14C
+#define MPT3SAS_CISCO_12G_8I_HBA_SSDID  0x154
+#define MPT3SAS_CISCO_12G_AVILA_HBA_SSDID  0x155
+#define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID  0x156
+
+/*
  * status bits for ioc->diag_buffer_status
  */
 #define MPT3_DIAG_BUFFER_IS_REGISTERED	(0x01)
 #define MPT3_DIAG_BUFFER_IS_RELEASED	(0x02)
 #define MPT3_DIAG_BUFFER_IS_DIAG_RESET	(0x04)
 
+/*
+ * Combined Reply Queue constants,
+ * There are twelve Supplemental Reply Post Host Index Registers
+ * and each register is at offset 0x10 bytes from the previous one.
+ */
+#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT 12
+#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET (0x10)
 
 /* OEM Identifiers */
 #define MFG10_OEM_ID_INVALID                   (0x00000000)
@@ -173,6 +210,8 @@
 #define MFG10_GF0_SSD_DATA_SCRUB_DISABLE       (0x00000008)
 #define MFG10_GF0_SINGLE_DRIVE_R0              (0x00000010)
 
+#define VIRTUAL_IO_FAILED_RETRY			(0x32010081)
+
 /* OEM Specific Flags will come from OEM specific header files */
 struct Mpi2ManufacturingPage10_t {
 	MPI2_CONFIG_PAGE_HEADER	Header;		/* 00h */
@@ -294,7 +333,8 @@ struct _internal_cmd {
  * @responding: used in _scsih_sas_device_mark_responding
  * @fast_path: fast path feature enable bit
  * @pfa_led_on: flag for PFA LED status
- *
+ * @pend_sas_rphy_add: flag to check if device is in sas_rphy_add()
+ *	addition routine.
  */
 struct _sas_device {
 	struct list_head list;
@@ -315,6 +355,9 @@ struct _sas_device {
 	u8	responding;
 	u8	fast_path;
 	u8	pfa_led_on;
+	u8	pend_sas_rphy_add;
+	u8	enclosure_level;
+	u8	connector_name[4];
 };
 
 /**
@@ -728,7 +771,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
  *				is assigned only ones
  * @reply_queue_count: number of reply queue's
  * @reply_queue_list: link list contaning the reply queue info
- * @reply_post_host_index: head index in the pool where FW completes IO
+ * @msix96_vector: 96 MSI-X vector support
+ * @replyPostRegisterIndex: index of next position in Reply Desc Post Queue
  * @delayed_tr_list: target reset link list
  * @delayed_tr_volume_list: volume target reset link list
  * @@temp_sensors_count: flag to carry the number of temperature sensors
@@ -814,7 +858,6 @@ struct MPT3SAS_ADAPTER {
 	MPT_BUILD_SG_SCMD build_sg_scmd;
 	MPT_BUILD_SG    build_sg;
 	MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge;
-	u8              mpi25;
 	u16             sge_size_ieee;
 
 	/* function ptr for MPI sg elements only */
@@ -937,6 +980,10 @@ struct MPT3SAS_ADAPTER {
 	u8		reply_queue_count;
 	struct list_head reply_queue_list;
 
+	u8		msix96_vector;
+	/* reply post register index */
+	resource_size_t	**replyPostRegisterIndex;
+
 	struct list_head delayed_tr_list;
 	struct list_head delayed_tr_volume_list;
 	u8		temp_sensors_count;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 5a97e3286..8ccef3852 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -585,6 +585,22 @@ _scsih_sas_device_remove(struct MPT3SAS_ADAPTER *ioc,
 
 	if (!sas_device)
 		return;
+	pr_info(MPT3SAS_FMT
+	    "removing handle(0x%04x), sas_addr(0x%016llx)\n",
+	    ioc->name, sas_device->handle,
+	    (unsigned long long) sas_device->sas_address);
+
+	if (sas_device->enclosure_handle != 0)
+		pr_info(MPT3SAS_FMT
+		   "removing enclosure logical id(0x%016llx), slot(%d)\n",
+		   ioc->name, (unsigned long long)
+		   sas_device->enclosure_logical_id, sas_device->slot);
+
+	if (sas_device->connector_name[0] != '\0')
+		pr_info(MPT3SAS_FMT
+		   "removing enclosure level(0x%04x), connector name( %s)\n",
+		   ioc->name, sas_device->enclosure_level,
+		   sas_device->connector_name);
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	list_del(&sas_device->list);
@@ -663,6 +679,18 @@ _scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc,
 		ioc->name, __func__, sas_device->handle,
 		(unsigned long long)sas_device->sas_address));
 
+	if (sas_device->enclosure_handle != 0)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: enclosure logical id(0x%016llx), slot( %d)\n",
+		    ioc->name, __func__, (unsigned long long)
+		    sas_device->enclosure_logical_id, sas_device->slot));
+
+	if (sas_device->connector_name[0] != '\0')
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: enclosure level(0x%04x), connector name( %s)\n",
+		    ioc->name, __func__,
+		    sas_device->enclosure_level, sas_device->connector_name));
+
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	list_add_tail(&sas_device->list, &ioc->sas_device_list);
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
@@ -704,6 +732,18 @@ _scsih_sas_device_init_add(struct MPT3SAS_ADAPTER *ioc,
 		__func__, sas_device->handle,
 		(unsigned long long)sas_device->sas_address));
 
+	if (sas_device->enclosure_handle != 0)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: enclosure logical id(0x%016llx), slot( %d)\n",
+		    ioc->name, __func__, (unsigned long long)
+		    sas_device->enclosure_logical_id, sas_device->slot));
+
+	if (sas_device->connector_name[0] != '\0')
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: enclosure level(0x%04x), connector name( %s)\n",
+		    ioc->name, __func__, sas_device->enclosure_level,
+		    sas_device->connector_name));
+
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
 	_scsih_determine_boot_device(ioc, sas_device, 0);
@@ -1772,10 +1812,16 @@ _scsih_slave_configure(struct scsi_device *sdev)
 	    "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n",
 	    ds, handle, (unsigned long long)sas_device->sas_address,
 	    sas_device->phy, (unsigned long long)sas_device->device_name);
-	sdev_printk(KERN_INFO, sdev,
-		"%s: enclosure_logical_id(0x%016llx), slot(%d)\n",
-		ds, (unsigned long long)
-	    sas_device->enclosure_logical_id, sas_device->slot);
+	if (sas_device->enclosure_handle != 0)
+		sdev_printk(KERN_INFO, sdev,
+		     "%s: enclosure_logical_id(0x%016llx), slot(%d)\n",
+		     ds, (unsigned long long)
+		     sas_device->enclosure_logical_id, sas_device->slot);
+	if (sas_device->connector_name[0] != '\0')
+		sdev_printk(KERN_INFO, sdev,
+		     "%s: enclosure level(0x%04x), connector name( %s)\n",
+		     ds, sas_device->enclosure_level,
+		     sas_device->connector_name);
 
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
@@ -2189,10 +2235,17 @@ _scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
 			    sas_device->handle,
 			    (unsigned long long)sas_device->sas_address,
 			    sas_device->phy);
-			starget_printk(KERN_INFO, starget,
-			    "enclosure_logical_id(0x%016llx), slot(%d)\n",
-			   (unsigned long long)sas_device->enclosure_logical_id,
-			    sas_device->slot);
+			if (sas_device->enclosure_handle != 0)
+				starget_printk(KERN_INFO, starget,
+				 "enclosure_logical_id(0x%016llx), slot(%d)\n",
+				 (unsigned long long)
+				 sas_device->enclosure_logical_id,
+				 sas_device->slot);
+			if (sas_device->connector_name)
+				starget_printk(KERN_INFO, starget,
+				"enclosure level(0x%04x),connector name(%s)\n",
+				 sas_device->enclosure_level,
+				 sas_device->connector_name);
 		}
 		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	}
@@ -2552,6 +2605,75 @@ _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc)
 }
 
 /**
+ * _scsih_internal_device_block - block the sdev device
+ * @sdev: per device object
+ * @sas_device_priv_data : per device driver private data
+ *
+ * make sure device is blocked without error, if not
+ * print an error
+ */
+static void
+_scsih_internal_device_block(struct scsi_device *sdev,
+			struct MPT3SAS_DEVICE *sas_device_priv_data)
+{
+	int r = 0;
+
+	sdev_printk(KERN_INFO, sdev, "device_block, handle(0x%04x)\n",
+	    sas_device_priv_data->sas_target->handle);
+	sas_device_priv_data->block = 1;
+
+	r = scsi_internal_device_block(sdev);
+	if (r == -EINVAL)
+		sdev_printk(KERN_WARNING, sdev,
+		    "device_block failed with return(%d) for handle(0x%04x)\n",
+		    sas_device_priv_data->sas_target->handle, r);
+}
+
+/**
+ * _scsih_internal_device_unblock - unblock the sdev device
+ * @sdev: per device object
+ * @sas_device_priv_data : per device driver private data
+ * make sure device is unblocked without error, if not retry
+ * by blocking and then unblocking
+ */
+
+static void
+_scsih_internal_device_unblock(struct scsi_device *sdev,
+			struct MPT3SAS_DEVICE *sas_device_priv_data)
+{
+	int r = 0;
+
+	sdev_printk(KERN_WARNING, sdev, "device_unblock and setting to running, "
+	    "handle(0x%04x)\n", sas_device_priv_data->sas_target->handle);
+	sas_device_priv_data->block = 0;
+	r = scsi_internal_device_unblock(sdev, SDEV_RUNNING);
+	if (r == -EINVAL) {
+		/* The device has been set to SDEV_RUNNING by SD layer during
+		 * device addition but the request queue is still stopped by
+		 * our earlier block call. We need to perform a block again
+		 * to get the device to SDEV_BLOCK and then to SDEV_RUNNING */
+
+		sdev_printk(KERN_WARNING, sdev,
+		    "device_unblock failed with return(%d) for handle(0x%04x) "
+		    "performing a block followed by an unblock\n",
+		    sas_device_priv_data->sas_target->handle, r);
+		sas_device_priv_data->block = 1;
+		r = scsi_internal_device_block(sdev);
+		if (r)
+			sdev_printk(KERN_WARNING, sdev, "retried device_block "
+			    "failed with return(%d) for handle(0x%04x)\n",
+			    sas_device_priv_data->sas_target->handle, r);
+
+		sas_device_priv_data->block = 0;
+		r = scsi_internal_device_unblock(sdev, SDEV_RUNNING);
+		if (r)
+			sdev_printk(KERN_WARNING, sdev, "retried device_unblock"
+			    " failed with return(%d) for handle(0x%04x)\n",
+			    sas_device_priv_data->sas_target->handle, r);
+	}
+}
+
+/**
  * _scsih_ublock_io_all_device - unblock every device
  * @ioc: per adapter object
  *
@@ -2570,11 +2692,10 @@ _scsih_ublock_io_all_device(struct MPT3SAS_ADAPTER *ioc)
 		if (!sas_device_priv_data->block)
 			continue;
 
-		sas_device_priv_data->block = 0;
 		dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
 			"device_running, handle(0x%04x)\n",
 		    sas_device_priv_data->sas_target->handle));
-		scsi_internal_device_unblock(sdev, SDEV_RUNNING);
+		_scsih_internal_device_unblock(sdev, sas_device_priv_data);
 	}
 }
 
@@ -2599,10 +2720,9 @@ _scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
 		if (sas_device_priv_data->sas_target->sas_address
 		    != sas_address)
 			continue;
-		if (sas_device_priv_data->block) {
-			sas_device_priv_data->block = 0;
-			scsi_internal_device_unblock(sdev, SDEV_RUNNING);
-		}
+		if (sas_device_priv_data->block)
+			_scsih_internal_device_unblock(sdev,
+				sas_device_priv_data);
 	}
 }
 
@@ -2625,10 +2745,7 @@ _scsih_block_io_all_device(struct MPT3SAS_ADAPTER *ioc)
 			continue;
 		if (sas_device_priv_data->block)
 			continue;
-		sas_device_priv_data->block = 1;
-		scsi_internal_device_block(sdev);
-		sdev_printk(KERN_INFO, sdev, "device_blocked, handle(0x%04x)\n",
-		    sas_device_priv_data->sas_target->handle);
+		_scsih_internal_device_block(sdev, sas_device_priv_data);
 	}
 }
 
@@ -2644,6 +2761,11 @@ _scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 {
 	struct MPT3SAS_DEVICE *sas_device_priv_data;
 	struct scsi_device *sdev;
+	struct _sas_device *sas_device;
+
+	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	if (!sas_device)
+		return;
 
 	shost_for_each_device(sdev, ioc->shost) {
 		sas_device_priv_data = sdev->hostdata;
@@ -2653,10 +2775,9 @@ _scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 			continue;
 		if (sas_device_priv_data->block)
 			continue;
-		sas_device_priv_data->block = 1;
-		scsi_internal_device_block(sdev);
-		sdev_printk(KERN_INFO, sdev,
-			"device_blocked, handle(0x%04x)\n", handle);
+		if (sas_device->pend_sas_rphy_add)
+			continue;
+		_scsih_internal_device_block(sdev, sas_device_priv_data);
 	}
 }
 
@@ -2806,6 +2927,18 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 			"setting delete flag: handle(0x%04x), sas_addr(0x%016llx)\n",
 			ioc->name, handle,
 		    (unsigned long long)sas_address));
+		if (sas_device->enclosure_handle != 0)
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			 "setting delete flag:enclosure logical id(0x%016llx),"
+			 " slot(%d)\n", ioc->name, (unsigned long long)
+			  sas_device->enclosure_logical_id,
+			  sas_device->slot));
+		if (sas_device->connector_name)
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			 "setting delete flag: enclosure level(0x%04x),"
+			 " connector name( %s)\n", ioc->name,
+			  sas_device->enclosure_level,
+			  sas_device->connector_name));
 		_scsih_ublock_io_device(ioc, sas_address);
 		sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
 	}
@@ -3821,10 +3954,19 @@ _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 				"\tsas_address(0x%016llx), phy(%d)\n",
 				ioc->name, (unsigned long long)
 			    sas_device->sas_address, sas_device->phy);
-			pr_warn(MPT3SAS_FMT
-			    "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
-			    ioc->name, (unsigned long long)
-			    sas_device->enclosure_logical_id, sas_device->slot);
+			if (sas_device->enclosure_handle != 0)
+				pr_warn(MPT3SAS_FMT
+				  "\tenclosure_logical_id(0x%016llx),"
+				  "slot(%d)\n", ioc->name,
+				  (unsigned long long)
+				  sas_device->enclosure_logical_id,
+				  sas_device->slot);
+			if (sas_device->connector_name[0])
+				pr_warn(MPT3SAS_FMT
+				  "\tenclosure level(0x%04x),"
+				  " connector name( %s)\n", ioc->name,
+				  sas_device->enclosure_level,
+				  sas_device->connector_name);
 		}
 		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	}
@@ -3999,7 +4141,16 @@ _scsih_smart_predicted_fault(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 		return;
 	}
-	starget_printk(KERN_WARNING, starget, "predicted fault\n");
+	if (sas_device->enclosure_handle != 0)
+		starget_printk(KERN_INFO, starget, "predicted fault, "
+			"enclosure logical id(0x%016llx), slot(%d)\n",
+			(unsigned long long)sas_device->enclosure_logical_id,
+			sas_device->slot);
+	if (sas_device->connector_name[0] != '\0')
+		starget_printk(KERN_WARNING, starget, "predicted fault, "
+			"enclosure level(0x%04x), connector name( %s)\n",
+			sas_device->enclosure_level,
+			sas_device->connector_name);
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
 	if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM)
@@ -4119,8 +4270,15 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 			_scsih_smart_predicted_fault(ioc,
 			    le16_to_cpu(mpi_reply->DevHandle));
 		mpt3sas_trigger_scsi(ioc, data.skey, data.asc, data.ascq);
-	}
 
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+		if (!(ioc->logging_level & MPT_DEBUG_REPLY) &&
+		     ((scmd->sense_buffer[2] == UNIT_ATTENTION) ||
+		     (scmd->sense_buffer[2] == MEDIUM_ERROR) ||
+		     (scmd->sense_buffer[2] == HARDWARE_ERROR)))
+			_scsih_scsi_ioc_info(ioc, scmd, mpi_reply, smid);
+#endif
+	}
 	switch (ioc_status) {
 	case MPI2_IOCSTATUS_BUSY:
 	case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
@@ -4146,6 +4304,9 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 				scmd->device->expecting_cc_ua = 1;
 			}
 			break;
+		} else if (log_info == VIRTUAL_IO_FAILED_RETRY) {
+			scmd->result = DID_RESET << 16;
+			break;
 		}
 		scmd->result = DID_SOFT_ERROR << 16;
 		break;
@@ -4788,6 +4949,16 @@ _scsih_check_device(struct MPT3SAS_ADAPTER *ioc,
 			sas_device->handle, handle);
 		sas_target_priv_data->handle = handle;
 		sas_device->handle = handle;
+		if (sas_device_pg0.Flags &
+		     MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
+			sas_device->enclosure_level =
+				le16_to_cpu(sas_device_pg0.EnclosureLevel);
+			memcpy(&sas_device->connector_name[0],
+				&sas_device_pg0.ConnectorName[0], 4);
+		} else {
+			sas_device->enclosure_level = 0;
+			sas_device->connector_name[0] = '\0';
+		}
 	}
 
 	/* check if device is present */
@@ -4894,14 +5065,24 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
 		    ioc->name, __FILE__, __LINE__, __func__);
 	sas_device->enclosure_handle =
 	    le16_to_cpu(sas_device_pg0.EnclosureHandle);
-	sas_device->slot =
-	    le16_to_cpu(sas_device_pg0.Slot);
+	if (sas_device->enclosure_handle != 0)
+		sas_device->slot =
+		    le16_to_cpu(sas_device_pg0.Slot);
 	sas_device->device_info = device_info;
 	sas_device->sas_address = sas_address;
 	sas_device->phy = sas_device_pg0.PhyNum;
 	sas_device->fast_path = (le16_to_cpu(sas_device_pg0.Flags) &
 	    MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0;
 
+	if (sas_device_pg0.Flags & MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
+		sas_device->enclosure_level =
+			le16_to_cpu(sas_device_pg0.EnclosureLevel);
+		memcpy(&sas_device->connector_name[0],
+			&sas_device_pg0.ConnectorName[0], 4);
+	} else {
+		sas_device->enclosure_level = 0;
+		sas_device->connector_name[0] = '\0';
+	}
 	/* get enclosure_logical_id */
 	if (sas_device->enclosure_handle && !(mpt3sas_config_get_enclosure_pg0(
 	   ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
@@ -4943,6 +5124,18 @@ _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
 		ioc->name, __func__,
 	    sas_device->handle, (unsigned long long)
 	    sas_device->sas_address));
+	if (sas_device->enclosure_handle != 0)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: enter: enclosure logical id(0x%016llx), slot(%d)\n",
+		    ioc->name, __func__,
+		    (unsigned long long)sas_device->enclosure_logical_id,
+		    sas_device->slot));
+	if (sas_device->connector_name[0] != '\0')
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		  "%s: enter: enclosure level(0x%04x), connector name( %s)\n",
+		  ioc->name, __func__,
+		  sas_device->enclosure_level,
+		  sas_device->connector_name));
 
 	if (sas_device->starget && sas_device->starget->hostdata) {
 		sas_target_priv_data = sas_device->starget->hostdata;
@@ -4959,12 +5152,34 @@ _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
 		"removing handle(0x%04x), sas_addr(0x%016llx)\n",
 		ioc->name, sas_device->handle,
 	    (unsigned long long) sas_device->sas_address);
+	if (sas_device->enclosure_handle != 0)
+		pr_info(MPT3SAS_FMT
+		  "removing : enclosure logical id(0x%016llx), slot(%d)\n",
+		  ioc->name,
+		  (unsigned long long)sas_device->enclosure_logical_id,
+		  sas_device->slot);
+	if (sas_device->connector_name[0] != '\0')
+		pr_info(MPT3SAS_FMT
+		  "removing enclosure level(0x%04x), connector name( %s)\n",
+		  ioc->name, sas_device->enclosure_level,
+		  sas_device->connector_name);
 
 	dewtprintk(ioc, pr_info(MPT3SAS_FMT
 		"%s: exit: handle(0x%04x), sas_addr(0x%016llx)\n",
 		ioc->name, __func__,
-	    sas_device->handle, (unsigned long long)
-	    sas_device->sas_address));
+		sas_device->handle, (unsigned long long)
+		sas_device->sas_address));
+	if (sas_device->enclosure_handle != 0)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: exit: enclosure logical id(0x%016llx), slot(%d)\n",
+		    ioc->name, __func__,
+		    (unsigned long long)sas_device->enclosure_logical_id,
+		    sas_device->slot));
+	if (sas_device->connector_name[0] != '\0')
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: exit: enclosure level(0x%04x), connector name(%s)\n",
+		    ioc->name, __func__, sas_device->enclosure_level,
+		    sas_device->connector_name));
 
 	kfree(sas_device);
 }
@@ -6357,9 +6572,7 @@ _scsih_prep_device_scan(struct MPT3SAS_ADAPTER *ioc)
 /**
  * _scsih_mark_responding_sas_device - mark a sas_devices as responding
  * @ioc: per adapter object
- * @sas_address: sas address
- * @slot: enclosure slot id
- * @handle: device handle
+ * @sas_device_pg0: SAS Device page 0
  *
  * After host reset, find out whether devices are still responding.
  * Used in _scsih_remove_unresponsive_sas_devices.
@@ -6367,8 +6580,8 @@ _scsih_prep_device_scan(struct MPT3SAS_ADAPTER *ioc)
  * Return nothing.
  */
 static void
-_scsih_mark_responding_sas_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
-	u16 slot, u16 handle)
+_scsih_mark_responding_sas_device(struct MPT3SAS_ADAPTER *ioc,
+Mpi2SasDevicePage0_t *sas_device_pg0)
 {
 	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
 	struct scsi_target *starget;
@@ -6377,8 +6590,8 @@ _scsih_mark_responding_sas_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
-		if (sas_device->sas_address == sas_address &&
-		    sas_device->slot == slot) {
+		if ((sas_device->sas_address == sas_device_pg0->SASAddress) &&
+			(sas_device->slot == sas_device_pg0->Slot)) {
 			sas_device->responding = 1;
 			starget = sas_device->starget;
 			if (starget && starget->hostdata) {
@@ -6387,22 +6600,40 @@ _scsih_mark_responding_sas_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
 				sas_target_priv_data->deleted = 0;
 			} else
 				sas_target_priv_data = NULL;
-			if (starget)
+			if (starget) {
 				starget_printk(KERN_INFO, starget,
-				    "handle(0x%04x), sas_addr(0x%016llx), "
-				    "enclosure logical id(0x%016llx), "
-				    "slot(%d)\n", handle,
-				    (unsigned long long)sas_device->sas_address,
+				    "handle(0x%04x), sas_addr(0x%016llx)\n",
+				    sas_device_pg0->DevHandle,
 				    (unsigned long long)
-				    sas_device->enclosure_logical_id,
-				    sas_device->slot);
-			if (sas_device->handle == handle)
+				    sas_device->sas_address);
+
+				if (sas_device->enclosure_handle != 0)
+					starget_printk(KERN_INFO, starget,
+					 "enclosure logical id(0x%016llx),"
+					 " slot(%d)\n",
+					 (unsigned long long)
+					 sas_device->enclosure_logical_id,
+					 sas_device->slot);
+			}
+			if (sas_device_pg0->Flags &
+			      MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
+				sas_device->enclosure_level =
+				   le16_to_cpu(sas_device_pg0->EnclosureLevel);
+				memcpy(&sas_device->connector_name[0],
+					&sas_device_pg0->ConnectorName[0], 4);
+			} else {
+				sas_device->enclosure_level = 0;
+				sas_device->connector_name[0] = '\0';
+			}
+
+			if (sas_device->handle == sas_device_pg0->DevHandle)
 				goto out;
 			pr_info("\thandle changed from(0x%04x)!!!\n",
 			    sas_device->handle);
-			sas_device->handle = handle;
+			sas_device->handle = sas_device_pg0->DevHandle;
 			if (sas_target_priv_data)
-				sas_target_priv_data->handle = handle;
+				sas_target_priv_data->handle =
+					sas_device_pg0->DevHandle;
 			goto out;
 		}
 	}
@@ -6441,13 +6672,15 @@ _scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
 		    MPI2_IOCSTATUS_MASK;
 		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
 			break;
-		handle = le16_to_cpu(sas_device_pg0.DevHandle);
+		handle = sas_device_pg0.DevHandle =
+				le16_to_cpu(sas_device_pg0.DevHandle);
 		device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
 		if (!(_scsih_is_end_device(device_info)))
 			continue;
-		_scsih_mark_responding_sas_device(ioc,
-		    le64_to_cpu(sas_device_pg0.SASAddress),
-		    le16_to_cpu(sas_device_pg0.Slot), handle);
+		sas_device_pg0.SASAddress =
+				le64_to_cpu(sas_device_pg0.SASAddress);
+		sas_device_pg0.Slot = le16_to_cpu(sas_device_pg0.Slot);
+		_scsih_mark_responding_sas_device(ioc, &sas_device_pg0);
 	}
 
  out:
@@ -7854,8 +8087,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* event thread */
 	snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
 	    "fw_event%d", ioc->id);
-	ioc->firmware_event_thread = create_singlethread_workqueue(
-	    ioc->firmware_event_name);
+	ioc->firmware_event_thread = alloc_ordered_workqueue(
+	    ioc->firmware_event_name, WQ_MEM_RECLAIM);
 	if (!ioc->firmware_event_thread) {
 		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
 		    ioc->name, __FILE__, __LINE__, __func__);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index efb98afc4..70fd019e7 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -649,6 +649,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 	unsigned long flags;
 	struct _sas_node *sas_node;
 	struct sas_rphy *rphy;
+	struct _sas_device *sas_device = NULL;
 	int i;
 	struct sas_port *port;
 
@@ -731,10 +732,27 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 		    mpt3sas_port->remote_identify.device_type);
 
 	rphy->identify = mpt3sas_port->remote_identify;
+
+	if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) {
+		sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+				    mpt3sas_port->remote_identify.sas_address);
+		if (!sas_device) {
+			dfailprintk(ioc, printk(MPT3SAS_FMT
+				"failure at %s:%d/%s()!\n",
+				ioc->name, __FILE__, __LINE__, __func__));
+			goto out_fail;
+		}
+		sas_device->pend_sas_rphy_add = 1;
+	}
+
 	if ((sas_rphy_add(rphy))) {
 		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
 		    ioc->name, __FILE__, __LINE__, __func__);
 	}
+
+	if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE)
+		sas_device->pend_sas_rphy_add = 0;
+
 	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
 		dev_printk(KERN_INFO, &rphy->dev,
 			"add: handle(0x%04x), sas_addr(0x%016llx)\n",
@@ -1946,7 +1964,7 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	} else {
 		dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio),
 		    blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
-		if (!dma_addr_out) {
+		if (pci_dma_mapping_error(ioc->pdev, dma_addr_out)) {
 			pr_info(MPT3SAS_FMT "%s(): DMA Addr out = NULL\n",
 			    ioc->name, __func__);
 			rc = -ENOMEM;
@@ -1968,7 +1986,7 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	} else {
 		dma_addr_in =  pci_map_single(ioc->pdev, bio_data(rsp->bio),
 		    blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
-		if (!dma_addr_in) {
+		if (pci_dma_mapping_error(ioc->pdev, dma_addr_in)) {
 			pr_info(MPT3SAS_FMT "%s(): DMA Addr in = NULL\n",
 			    ioc->name, __func__);
 			rc = -ENOMEM;