Initial import

12 files changed, 16502 insertions, 0 deletions

diff --git a/drivers/scsi/pm8001/Makefile b/drivers/scsi/pm8001/Makefile
new file mode 100644
index 000000000..ce4cd87c7
--- /dev/null
+++ b/drivers/scsi/pm8001/Makefile
@@ -0,0 +1,13 @@
+#
+# Kernel configuration file for the PM8001 SAS/SATA 8x6G based HBA driver
+#
+# Copyright (C) 2008-2009  USI Co., Ltd.
+
+
+obj-$(CONFIG_SCSI_PM8001) += pm80xx.o
+pm80xx-y += pm8001_init.o \
+		pm8001_sas.o  \
+		pm8001_ctl.o  \
+		pm8001_hwi.o  \
+		pm80xx_hwi.o
+
diff --git a/drivers/scsi/pm8001/pm8001_chips.h b/drivers/scsi/pm8001/pm8001_chips.h
new file mode 100644
index 000000000..9241c7826
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_chips.h
@@ -0,0 +1,89 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_CHIPS_H_
+#define _PM8001_CHIPS_H_
+
+static inline u32 pm8001_read_32(void *virt_addr)
+{
+	return *((u32 *)virt_addr);
+}
+
+static inline void pm8001_write_32(void *addr, u32 offset, __le32 val)
+{
+	*((__le32 *)(addr + offset)) = val;
+}
+
+static inline u32 pm8001_cr32(struct pm8001_hba_info *pm8001_ha, u32 bar,
+		u32 offset)
+{
+	return readl(pm8001_ha->io_mem[bar].memvirtaddr + offset);
+}
+
+static inline void pm8001_cw32(struct pm8001_hba_info *pm8001_ha, u32 bar,
+		u32 addr, u32 val)
+{
+	writel(val, pm8001_ha->io_mem[bar].memvirtaddr + addr);
+}
+static inline u32 pm8001_mr32(void __iomem *addr, u32 offset)
+{
+	return readl(addr + offset);
+}
+static inline void pm8001_mw32(void __iomem *addr, u32 offset, u32 val)
+{
+	writel(val, addr + offset);
+}
+static inline u32 get_pci_bar_index(u32 pcibar)
+{
+		switch (pcibar) {
+		case 0x18:
+		case 0x1C:
+			return 1;
+		case 0x20:
+			return 2;
+		case 0x24:
+			return 3;
+		default:
+			return 0;
+	}
+}
+
+#endif  /* _PM8001_CHIPS_H_ */
+
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
new file mode 100644
index 000000000..be8269c8d
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -0,0 +1,753 @@
+/*
+ * PMC-Sierra 8001/8081/8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include "pm8001_sas.h"
+#include "pm8001_ctl.h"
+
+/* scsi host attributes */
+
+/**
+ * pm8001_ctl_mpi_interface_rev_show - MPI interface revision number
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_mpi_interface_rev_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+	if (pm8001_ha->chip_id == chip_8001) {
+		return snprintf(buf, PAGE_SIZE, "%d\n",
+			pm8001_ha->main_cfg_tbl.pm8001_tbl.interface_rev);
+	} else {
+		return snprintf(buf, PAGE_SIZE, "%d\n",
+			pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev);
+	}
+}
+static
+DEVICE_ATTR(interface_rev, S_IRUGO, pm8001_ctl_mpi_interface_rev_show, NULL);
+
+/**
+ * pm8001_ctl_fw_version_show - firmware version
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_fw_version_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+	if (pm8001_ha->chip_id == chip_8001) {
+		return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
+		(u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev >> 24),
+		(u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev >> 16),
+		(u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev >> 8),
+		(u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev));
+	} else {
+		return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
+		(u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev >> 24),
+		(u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev >> 16),
+		(u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev >> 8),
+		(u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev));
+	}
+}
+static DEVICE_ATTR(fw_version, S_IRUGO, pm8001_ctl_fw_version_show, NULL);
+/**
+ * pm8001_ctl_max_out_io_show - max outstanding io supported
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_out_io_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+	if (pm8001_ha->chip_id == chip_8001) {
+		return snprintf(buf, PAGE_SIZE, "%d\n",
+			pm8001_ha->main_cfg_tbl.pm8001_tbl.max_out_io);
+	} else {
+		return snprintf(buf, PAGE_SIZE, "%d\n",
+			pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io);
+	}
+}
+static DEVICE_ATTR(max_out_io, S_IRUGO, pm8001_ctl_max_out_io_show, NULL);
+/**
+ * pm8001_ctl_max_devices_show - max devices support
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_devices_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+	if (pm8001_ha->chip_id == chip_8001) {
+		return snprintf(buf, PAGE_SIZE, "%04d\n",
+			(u16)(pm8001_ha->main_cfg_tbl.pm8001_tbl.max_sgl >> 16)
+			);
+	} else {
+		return snprintf(buf, PAGE_SIZE, "%04d\n",
+			(u16)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl >> 16)
+			);
+	}
+}
+static DEVICE_ATTR(max_devices, S_IRUGO, pm8001_ctl_max_devices_show, NULL);
+/**
+ * pm8001_ctl_max_sg_list_show - max sg list supported iff not 0.0 for no
+ * hardware limitation
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_sg_list_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+	if (pm8001_ha->chip_id == chip_8001) {
+		return snprintf(buf, PAGE_SIZE, "%04d\n",
+			pm8001_ha->main_cfg_tbl.pm8001_tbl.max_sgl & 0x0000FFFF
+			);
+	} else {
+		return snprintf(buf, PAGE_SIZE, "%04d\n",
+			pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl & 0x0000FFFF
+			);
+	}
+}
+static DEVICE_ATTR(max_sg_list, S_IRUGO, pm8001_ctl_max_sg_list_show, NULL);
+
+#define SAS_1_0 0x1
+#define SAS_1_1 0x2
+#define SAS_2_0 0x4
+
+static ssize_t
+show_sas_spec_support_status(unsigned int mode, char *buf)
+{
+	ssize_t len = 0;
+
+	if (mode & SAS_1_1)
+		len = sprintf(buf, "%s", "SAS1.1");
+	if (mode & SAS_2_0)
+		len += sprintf(buf + len, "%s%s", len ? ", " : "", "SAS2.0");
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
+
+/**
+ * pm8001_ctl_sas_spec_support_show - sas spec supported
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_sas_spec_support_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	unsigned int mode;
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	/* fe000000 means supports SAS2.1 */
+	if (pm8001_ha->chip_id == chip_8001)
+		mode = (pm8001_ha->main_cfg_tbl.pm8001_tbl.ctrl_cap_flag &
+							0xfe000000)>>25;
+	else
+		/* fe000000 means supports SAS2.1 */
+		mode = (pm8001_ha->main_cfg_tbl.pm80xx_tbl.ctrl_cap_flag &
+							0xfe000000)>>25;
+	return show_sas_spec_support_status(mode, buf);
+}
+static DEVICE_ATTR(sas_spec_support, S_IRUGO,
+		   pm8001_ctl_sas_spec_support_show, NULL);
+
+/**
+ * pm8001_ctl_sas_address_show - sas address
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * This is the controller sas address
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_host_sas_address_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
+			be64_to_cpu(*(__be64 *)pm8001_ha->sas_addr));
+}
+static DEVICE_ATTR(host_sas_address, S_IRUGO,
+		   pm8001_ctl_host_sas_address_show, NULL);
+
+/**
+ * pm8001_ctl_logging_level_show - logging level
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t pm8001_ctl_logging_level_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+	return snprintf(buf, PAGE_SIZE, "%08xh\n", pm8001_ha->logging_level);
+}
+static ssize_t pm8001_ctl_logging_level_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	int val = 0;
+
+	if (sscanf(buf, "%x", &val) != 1)
+		return -EINVAL;
+
+	pm8001_ha->logging_level = val;
+	return strlen(buf);
+}
+
+static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR,
+	pm8001_ctl_logging_level_show, pm8001_ctl_logging_level_store);
+/**
+ * pm8001_ctl_aap_log_show - aap1 event log
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_aap_log_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	int i;
+#define AAP1_MEMMAP(r, c) \
+	(*(u32 *)((u8*)pm8001_ha->memoryMap.region[AAP1].virt_ptr + (r) * 32 \
+	+ (c)))
+
+	char *str = buf;
+	int max = 2;
+	for (i = 0; i < max; i++) {
+		str += sprintf(str, "0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x"
+			       "0x%08x 0x%08x\n",
+			       AAP1_MEMMAP(i, 0),
+			       AAP1_MEMMAP(i, 4),
+			       AAP1_MEMMAP(i, 8),
+			       AAP1_MEMMAP(i, 12),
+			       AAP1_MEMMAP(i, 16),
+			       AAP1_MEMMAP(i, 20),
+			       AAP1_MEMMAP(i, 24),
+			       AAP1_MEMMAP(i, 28));
+	}
+
+	return str - buf;
+}
+static DEVICE_ATTR(aap_log, S_IRUGO, pm8001_ctl_aap_log_show, NULL);
+/**
+ * pm8001_ctl_ib_queue_log_show - Out bound Queue log
+ * @cdev:pointer to embedded class device
+ * @buf: the buffer returned
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_ib_queue_log_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	int offset;
+	char *str = buf;
+	int start = 0;
+#define IB_MEMMAP(c)	\
+		(*(u32 *)((u8 *)pm8001_ha->	\
+		memoryMap.region[IB].virt_ptr +	\
+		pm8001_ha->evtlog_ib_offset + (c)))
+
+	for (offset = 0; offset < IB_OB_READ_TIMES; offset++) {
+		str += sprintf(str, "0x%08x\n", IB_MEMMAP(start));
+		start = start + 4;
+	}
+	pm8001_ha->evtlog_ib_offset += SYSFS_OFFSET;
+	if (((pm8001_ha->evtlog_ib_offset) % (PM80XX_IB_OB_QUEUE_SIZE)) == 0)
+		pm8001_ha->evtlog_ib_offset = 0;
+
+	return str - buf;
+}
+
+static DEVICE_ATTR(ib_log, S_IRUGO, pm8001_ctl_ib_queue_log_show, NULL);
+/**
+ * pm8001_ctl_ob_queue_log_show - Out bound Queue log
+ * @cdev:pointer to embedded class device
+ * @buf: the buffer returned
+ * A sysfs 'read-only' shost attribute.
+ */
+
+static ssize_t pm8001_ctl_ob_queue_log_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	int offset;
+	char *str = buf;
+	int start = 0;
+#define OB_MEMMAP(c)	\
+		(*(u32 *)((u8 *)pm8001_ha->	\
+		memoryMap.region[OB].virt_ptr +	\
+		pm8001_ha->evtlog_ob_offset + (c)))
+
+	for (offset = 0; offset < IB_OB_READ_TIMES; offset++) {
+		str += sprintf(str, "0x%08x\n", OB_MEMMAP(start));
+		start = start + 4;
+	}
+	pm8001_ha->evtlog_ob_offset += SYSFS_OFFSET;
+	if (((pm8001_ha->evtlog_ob_offset) % (PM80XX_IB_OB_QUEUE_SIZE)) == 0)
+		pm8001_ha->evtlog_ob_offset = 0;
+
+	return str - buf;
+}
+static DEVICE_ATTR(ob_log, S_IRUGO, pm8001_ctl_ob_queue_log_show, NULL);
+/**
+ * pm8001_ctl_bios_version_show - Bios version Display
+ * @cdev:pointer to embedded class device
+ * @buf:the buffer returned
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_bios_version_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	char *str = buf;
+	int bios_index;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	struct pm8001_ioctl_payload payload;
+
+	pm8001_ha->nvmd_completion = &completion;
+	payload.minor_function = 7;
+	payload.offset = 0;
+	payload.length = 4096;
+	payload.func_specific = kzalloc(4096, GFP_KERNEL);
+	if (!payload.func_specific)
+		return -ENOMEM;
+	if (PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload)) {
+		kfree(payload.func_specific);
+		return -ENOMEM;
+	}
+	wait_for_completion(&completion);
+	for (bios_index = BIOSOFFSET; bios_index < BIOS_OFFSET_LIMIT;
+		bios_index++)
+		str += sprintf(str, "%c",
+			*(payload.func_specific+bios_index));
+	kfree(payload.func_specific);
+	return str - buf;
+}
+static DEVICE_ATTR(bios_version, S_IRUGO, pm8001_ctl_bios_version_show, NULL);
+/**
+ * pm8001_ctl_aap_log_show - IOP event log
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_iop_log_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+#define IOP_MEMMAP(r, c) \
+	(*(u32 *)((u8*)pm8001_ha->memoryMap.region[IOP].virt_ptr + (r) * 32 \
+	+ (c)))
+	int i;
+	char *str = buf;
+	int max = 2;
+	for (i = 0; i < max; i++) {
+		str += sprintf(str, "0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x"
+			       "0x%08x 0x%08x\n",
+			       IOP_MEMMAP(i, 0),
+			       IOP_MEMMAP(i, 4),
+			       IOP_MEMMAP(i, 8),
+			       IOP_MEMMAP(i, 12),
+			       IOP_MEMMAP(i, 16),
+			       IOP_MEMMAP(i, 20),
+			       IOP_MEMMAP(i, 24),
+			       IOP_MEMMAP(i, 28));
+	}
+
+	return str - buf;
+}
+static DEVICE_ATTR(iop_log, S_IRUGO, pm8001_ctl_iop_log_show, NULL);
+
+/**
+ ** pm8001_ctl_fatal_log_show - fatal error logging
+ ** @cdev:pointer to embedded class device
+ ** @buf: the buffer returned
+ **
+ ** A sysfs 'read-only' shost attribute.
+ **/
+
+static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	ssize_t count;
+
+	count = pm80xx_get_fatal_dump(cdev, attr, buf);
+	return count;
+}
+
+static DEVICE_ATTR(fatal_log, S_IRUGO, pm8001_ctl_fatal_log_show, NULL);
+
+
+/**
+ ** pm8001_ctl_gsm_log_show - gsm dump collection
+ ** @cdev:pointer to embedded class device
+ ** @buf: the buffer returned
+ **A sysfs 'read-only' shost attribute.
+ **/
+static ssize_t pm8001_ctl_gsm_log_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	ssize_t count;
+
+	count = pm8001_get_gsm_dump(cdev, SYSFS_OFFSET, buf);
+	return count;
+}
+
+static DEVICE_ATTR(gsm_log, S_IRUGO, pm8001_ctl_gsm_log_show, NULL);
+
+#define FLASH_CMD_NONE      0x00
+#define FLASH_CMD_UPDATE    0x01
+#define FLASH_CMD_SET_NVMD    0x02
+
+struct flash_command {
+     u8      command[8];
+     int     code;
+};
+
+static struct flash_command flash_command_table[] =
+{
+     {"set_nvmd",    FLASH_CMD_SET_NVMD},
+     {"update",      FLASH_CMD_UPDATE},
+     {"",            FLASH_CMD_NONE} /* Last entry should be NULL. */
+};
+
+struct error_fw {
+     char    *reason;
+     int     err_code;
+};
+
+static struct error_fw flash_error_table[] =
+{
+     {"Failed to open fw image file",	FAIL_OPEN_BIOS_FILE},
+     {"image header mismatch",		FLASH_UPDATE_HDR_ERR},
+     {"image offset mismatch",		FLASH_UPDATE_OFFSET_ERR},
+     {"image CRC Error",		FLASH_UPDATE_CRC_ERR},
+     {"image length Error.",		FLASH_UPDATE_LENGTH_ERR},
+     {"Failed to program flash chip",	FLASH_UPDATE_HW_ERR},
+     {"Flash chip not supported.",	FLASH_UPDATE_DNLD_NOT_SUPPORTED},
+     {"Flash update disabled.",		FLASH_UPDATE_DISABLED},
+     {"Flash in progress",		FLASH_IN_PROGRESS},
+     {"Image file size Error",		FAIL_FILE_SIZE},
+     {"Input parameter error",		FAIL_PARAMETERS},
+     {"Out of memory",			FAIL_OUT_MEMORY},
+     {"OK", 0}	/* Last entry err_code = 0. */
+};
+
+static int pm8001_set_nvmd(struct pm8001_hba_info *pm8001_ha)
+{
+	struct pm8001_ioctl_payload	*payload;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	u8		*ioctlbuffer;
+	u32		ret;
+	u32		length = 1024 * 5 + sizeof(*payload) - 1;
+
+	if (pm8001_ha->fw_image->size > 4096) {
+		pm8001_ha->fw_status = FAIL_FILE_SIZE;
+		return -EFAULT;
+	}
+
+	ioctlbuffer = kzalloc(length, GFP_KERNEL);
+	if (!ioctlbuffer) {
+		pm8001_ha->fw_status = FAIL_OUT_MEMORY;
+		return -ENOMEM;
+	}
+	payload = (struct pm8001_ioctl_payload *)ioctlbuffer;
+	memcpy((u8 *)&payload->func_specific, (u8 *)pm8001_ha->fw_image->data,
+				pm8001_ha->fw_image->size);
+	payload->length = pm8001_ha->fw_image->size;
+	payload->id = 0;
+	payload->minor_function = 0x1;
+	pm8001_ha->nvmd_completion = &completion;
+	ret = PM8001_CHIP_DISP->set_nvmd_req(pm8001_ha, payload);
+	if (ret) {
+		pm8001_ha->fw_status = FAIL_OUT_MEMORY;
+		goto out;
+	}
+	wait_for_completion(&completion);
+out:
+	kfree(ioctlbuffer);
+	return ret;
+}
+
+static int pm8001_update_flash(struct pm8001_hba_info *pm8001_ha)
+{
+	struct pm8001_ioctl_payload	*payload;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	u8		*ioctlbuffer;
+	struct fw_control_info	*fwControl;
+	u32		partitionSize, partitionSizeTmp;
+	u32		loopNumber, loopcount;
+	struct pm8001_fw_image_header *image_hdr;
+	u32		sizeRead = 0;
+	u32		ret = 0;
+	u32		length = 1024 * 16 + sizeof(*payload) - 1;
+
+	if (pm8001_ha->fw_image->size < 28) {
+		pm8001_ha->fw_status = FAIL_FILE_SIZE;
+		return -EFAULT;
+	}
+	ioctlbuffer = kzalloc(length, GFP_KERNEL);
+	if (!ioctlbuffer) {
+		pm8001_ha->fw_status = FAIL_OUT_MEMORY;
+		return -ENOMEM;
+	}
+	image_hdr = (struct pm8001_fw_image_header *)pm8001_ha->fw_image->data;
+	while (sizeRead < pm8001_ha->fw_image->size) {
+		partitionSizeTmp =
+			*(u32 *)((u8 *)&image_hdr->image_length + sizeRead);
+		partitionSize = be32_to_cpu(partitionSizeTmp);
+		loopcount = DIV_ROUND_UP(partitionSize + HEADER_LEN,
+					IOCTL_BUF_SIZE);
+		for (loopNumber = 0; loopNumber < loopcount; loopNumber++) {
+			payload = (struct pm8001_ioctl_payload *)ioctlbuffer;
+			payload->length = 1024*16;
+			payload->id = 0;
+			fwControl =
+			      (struct fw_control_info *)&payload->func_specific;
+			fwControl->len = IOCTL_BUF_SIZE;   /* IN */
+			fwControl->size = partitionSize + HEADER_LEN;/* IN */
+			fwControl->retcode = 0;/* OUT */
+			fwControl->offset = loopNumber * IOCTL_BUF_SIZE;/*OUT */
+
+		/* for the last chunk of data in case file size is not even with
+		4k, load only the rest*/
+		if (((loopcount-loopNumber) == 1) &&
+			((partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE)) {
+			fwControl->len =
+				(partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE;
+			memcpy((u8 *)fwControl->buffer,
+				(u8 *)pm8001_ha->fw_image->data + sizeRead,
+				(partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE);
+			sizeRead +=
+				(partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE;
+		} else {
+			memcpy((u8 *)fwControl->buffer,
+				(u8 *)pm8001_ha->fw_image->data + sizeRead,
+				IOCTL_BUF_SIZE);
+			sizeRead += IOCTL_BUF_SIZE;
+		}
+
+		pm8001_ha->nvmd_completion = &completion;
+		ret = PM8001_CHIP_DISP->fw_flash_update_req(pm8001_ha, payload);
+		if (ret) {
+			pm8001_ha->fw_status = FAIL_OUT_MEMORY;
+			goto out;
+		}
+		wait_for_completion(&completion);
+		if (fwControl->retcode > FLASH_UPDATE_IN_PROGRESS) {
+			pm8001_ha->fw_status = fwControl->retcode;
+			ret = -EFAULT;
+			goto out;
+		}
+		}
+	}
+out:
+	kfree(ioctlbuffer);
+	return ret;
+}
+static ssize_t pm8001_store_update_fw(struct device *cdev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	char *cmd_ptr, *filename_ptr;
+	int res, i;
+	int flash_command = FLASH_CMD_NONE;
+	int ret;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	/* this test protects us from running two flash processes at once,
+	 * so we should start with this test */
+	if (pm8001_ha->fw_status == FLASH_IN_PROGRESS)
+		return -EINPROGRESS;
+	pm8001_ha->fw_status = FLASH_IN_PROGRESS;
+
+	cmd_ptr = kzalloc(count*2, GFP_KERNEL);
+	if (!cmd_ptr) {
+		pm8001_ha->fw_status = FAIL_OUT_MEMORY;
+		return -ENOMEM;
+	}
+
+	filename_ptr = cmd_ptr + count;
+	res = sscanf(buf, "%s %s", cmd_ptr, filename_ptr);
+	if (res != 2) {
+		pm8001_ha->fw_status = FAIL_PARAMETERS;
+		ret = -EINVAL;
+		goto out;
+	}
+
+	for (i = 0; flash_command_table[i].code != FLASH_CMD_NONE; i++) {
+		if (!memcmp(flash_command_table[i].command,
+				 cmd_ptr, strlen(cmd_ptr))) {
+			flash_command = flash_command_table[i].code;
+			break;
+		}
+	}
+	if (flash_command == FLASH_CMD_NONE) {
+		pm8001_ha->fw_status = FAIL_PARAMETERS;
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = request_firmware(&pm8001_ha->fw_image,
+			       filename_ptr,
+			       pm8001_ha->dev);
+
+	if (ret) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk(
+			"Failed to load firmware image file %s,	error %d\n",
+			filename_ptr, ret));
+		pm8001_ha->fw_status = FAIL_OPEN_BIOS_FILE;
+		goto out;
+	}
+
+	if (FLASH_CMD_UPDATE == flash_command)
+		ret = pm8001_update_flash(pm8001_ha);
+	else
+		ret = pm8001_set_nvmd(pm8001_ha);
+
+	release_firmware(pm8001_ha->fw_image);
+out:
+	kfree(cmd_ptr);
+
+	if (ret)
+		return ret;
+
+	pm8001_ha->fw_status = FLASH_OK;
+	return count;
+}
+
+static ssize_t pm8001_show_update_fw(struct device *cdev,
+				     struct device_attribute *attr, char *buf)
+{
+	int i;
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+	for (i = 0; flash_error_table[i].err_code != 0; i++) {
+		if (flash_error_table[i].err_code == pm8001_ha->fw_status)
+			break;
+	}
+	if (pm8001_ha->fw_status != FLASH_IN_PROGRESS)
+		pm8001_ha->fw_status = FLASH_OK;
+
+	return snprintf(buf, PAGE_SIZE, "status=%x %s\n",
+			flash_error_table[i].err_code,
+			flash_error_table[i].reason);
+}
+
+static DEVICE_ATTR(update_fw, S_IRUGO|S_IWUSR|S_IWGRP,
+	pm8001_show_update_fw, pm8001_store_update_fw);
+struct device_attribute *pm8001_host_attrs[] = {
+	&dev_attr_interface_rev,
+	&dev_attr_fw_version,
+	&dev_attr_update_fw,
+	&dev_attr_aap_log,
+	&dev_attr_iop_log,
+	&dev_attr_fatal_log,
+	&dev_attr_gsm_log,
+	&dev_attr_max_out_io,
+	&dev_attr_max_devices,
+	&dev_attr_max_sg_list,
+	&dev_attr_sas_spec_support,
+	&dev_attr_logging_level,
+	&dev_attr_host_sas_address,
+	&dev_attr_bios_version,
+	&dev_attr_ib_log,
+	&dev_attr_ob_log,
+	NULL,
+};
+
diff --git a/drivers/scsi/pm8001/pm8001_ctl.h b/drivers/scsi/pm8001/pm8001_ctl.h
new file mode 100644
index 000000000..d0d43a250
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_ctl.h
@@ -0,0 +1,63 @@
+ /*
+  * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+  *
+  * Copyright (c) 2008-2009 USI Co., Ltd.
+  * All rights reserved.
+  *
+  * Redistribution and use in source and binary forms, with or without
+  * modification, are permitted provided that the following conditions
+  * are met:
+  * 1. Redistributions of source code must retain the above copyright
+  *    notice, this list of conditions, and the following disclaimer,
+  *    without modification.
+  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+  *    substantially similar to the "NO WARRANTY" disclaimer below
+  *    ("Disclaimer") and any redistribution must be conditioned upon
+  *    including a substantially similar Disclaimer requirement for further
+  *    binary redistribution.
+  * 3. Neither the names of the above-listed copyright holders nor the names
+  *    of any contributors may be used to endorse or promote products derived
+  *    from this software without specific prior written permission.
+  *
+  * Alternatively, this software may be distributed under the terms of the
+  * GNU General Public License ("GPL") version 2 as published by the Free
+  * Software Foundation.
+  *
+  * NO WARRANTY
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  * POSSIBILITY OF SUCH DAMAGES.
+  *
+  */
+
+#ifndef PM8001_CTL_H_INCLUDED
+#define PM8001_CTL_H_INCLUDED
+
+#define IOCTL_BUF_SIZE		4096
+#define HEADER_LEN			28
+#define SIZE_OFFSET			16
+
+#define BIOSOFFSET			56
+#define BIOS_OFFSET_LIMIT		61
+
+#define FLASH_OK                        0x000000
+#define FAIL_OPEN_BIOS_FILE             0x000100
+#define FAIL_FILE_SIZE                  0x000a00
+#define FAIL_PARAMETERS                 0x000b00
+#define FAIL_OUT_MEMORY                 0x000c00
+#define FLASH_IN_PROGRESS               0x001000
+
+#define IB_OB_READ_TIMES                256
+#define SYSFS_OFFSET                    1024
+#define PM80XX_IB_OB_QUEUE_SIZE         (32 * 1024)
+#define PM8001_IB_OB_QUEUE_SIZE         (16 * 1024)
+#endif /* PM8001_CTL_H_INCLUDED */
+
diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
new file mode 100644
index 000000000..74a4bb9af
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -0,0 +1,131 @@
+/*
+ * PMC-Sierra 8001/8081/8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_DEFS_H_
+#define _PM8001_DEFS_H_
+
+enum chip_flavors {
+	chip_8001,
+	chip_8008,
+	chip_8009,
+	chip_8018,
+	chip_8019,
+	chip_8074,
+	chip_8076,
+	chip_8077
+};
+
+enum phy_speed {
+	PHY_SPEED_15 = 0x01,
+	PHY_SPEED_30 = 0x02,
+	PHY_SPEED_60 = 0x04,
+};
+
+enum data_direction {
+	DATA_DIR_NONE = 0x0,	/* NO TRANSFER */
+	DATA_DIR_IN = 0x01,	/* INBOUND */
+	DATA_DIR_OUT = 0x02,	/* OUTBOUND */
+	DATA_DIR_BYRECIPIENT = 0x04, /* UNSPECIFIED */
+};
+
+enum port_type {
+	PORT_TYPE_SAS = (1L << 1),
+	PORT_TYPE_SATA = (1L << 0),
+};
+
+/* driver compile-time configuration */
+#define	PM8001_MAX_CCB		 512	/* max ccbs supported */
+#define PM8001_MPI_QUEUE         1024   /* maximum mpi queue entries */
+#define	PM8001_MAX_INB_NUM	 1
+#define	PM8001_MAX_OUTB_NUM	 1
+#define	PM8001_MAX_SPCV_INB_NUM		1
+#define	PM8001_MAX_SPCV_OUTB_NUM	4
+#define	PM8001_CAN_QUEUE	 508	/* SCSI Queue depth */
+
+/* Inbound/Outbound queue size */
+#define IOMB_SIZE_SPC		64
+#define IOMB_SIZE_SPCV		128
+
+/* unchangeable hardware details */
+#define	PM8001_MAX_PHYS		 16	/* max. possible phys */
+#define	PM8001_MAX_PORTS	 16	/* max. possible ports */
+#define	PM8001_MAX_DEVICES	 2048	/* max supported device */
+#define	PM8001_MAX_MSIX_VEC	 64	/* max msi-x int for spcv/ve */
+
+#define USI_MAX_MEMCNT_BASE	5
+#define IB			(USI_MAX_MEMCNT_BASE + 1)
+#define CI			(IB + PM8001_MAX_SPCV_INB_NUM)
+#define OB			(CI + PM8001_MAX_SPCV_INB_NUM)
+#define PI			(OB + PM8001_MAX_SPCV_OUTB_NUM)
+#define USI_MAX_MEMCNT		(PI + PM8001_MAX_SPCV_OUTB_NUM)
+#define PM8001_MAX_DMA_SG	SG_ALL
+enum memory_region_num {
+	AAP1 = 0x0, /* application acceleration processor */
+	IOP,	    /* IO processor */
+	NVMD,	    /* NVM device */
+	DEV_MEM,    /* memory for devices */
+	CCB_MEM,    /* memory for command control block */
+	FW_FLASH,    /* memory for fw flash update */
+	FORENSIC_MEM  /* memory for fw forensic data */
+};
+#define	PM8001_EVENT_LOG_SIZE	 (128 * 1024)
+
+/*error code*/
+enum mpi_err {
+	MPI_IO_STATUS_SUCCESS = 0x0,
+	MPI_IO_STATUS_BUSY = 0x01,
+	MPI_IO_STATUS_FAIL = 0x02,
+};
+
+/**
+ * Phy Control constants
+ */
+enum phy_control_type {
+	PHY_LINK_RESET = 0x01,
+	PHY_HARD_RESET = 0x02,
+	PHY_NOTIFY_ENABLE_SPINUP = 0x10,
+};
+
+enum pm8001_hba_info_flags {
+	PM8001F_INIT_TIME	= (1U << 0),
+	PM8001F_RUN_TIME	= (1U << 1),
+};
+
+#endif
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
new file mode 100644
index 000000000..96dcc097a
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -0,0 +1,5125 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+ #include <linux/slab.h>
+ #include "pm8001_sas.h"
+ #include "pm8001_hwi.h"
+ #include "pm8001_chips.h"
+ #include "pm8001_ctl.h"
+
+/**
+ * read_main_config_table - read the configure table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+	void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.signature	=
+				pm8001_mr32(address, 0x00);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.interface_rev =
+				pm8001_mr32(address, 0x04);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev	=
+				pm8001_mr32(address, 0x08);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.max_out_io	=
+				pm8001_mr32(address, 0x0C);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.max_sgl	=
+				pm8001_mr32(address, 0x10);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.ctrl_cap_flag =
+				pm8001_mr32(address, 0x14);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.gst_offset	=
+				pm8001_mr32(address, 0x18);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.inbound_queue_offset =
+		pm8001_mr32(address, MAIN_IBQ_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_queue_offset =
+		pm8001_mr32(address, MAIN_OBQ_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.hda_mode_flag	=
+		pm8001_mr32(address, MAIN_HDA_FLAGS_OFFSET);
+
+	/* read analog Setting offset from the configuration table */
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.anolog_setup_table_offset =
+		pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET);
+
+	/* read Error Dump Offset and Length */
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_offset0 =
+		pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_length0 =
+		pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_offset1 =
+		pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_length1 =
+		pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH);
+}
+
+/**
+ * read_general_status_table - read the general status table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+{
+	void __iomem *address = pm8001_ha->general_stat_tbl_addr;
+	pm8001_ha->gs_tbl.pm8001_tbl.gst_len_mpistate	=
+				pm8001_mr32(address, 0x00);
+	pm8001_ha->gs_tbl.pm8001_tbl.iq_freeze_state0	=
+				pm8001_mr32(address, 0x04);
+	pm8001_ha->gs_tbl.pm8001_tbl.iq_freeze_state1	=
+				pm8001_mr32(address, 0x08);
+	pm8001_ha->gs_tbl.pm8001_tbl.msgu_tcnt		=
+				pm8001_mr32(address, 0x0C);
+	pm8001_ha->gs_tbl.pm8001_tbl.iop_tcnt		=
+				pm8001_mr32(address, 0x10);
+	pm8001_ha->gs_tbl.pm8001_tbl.rsvd		=
+				pm8001_mr32(address, 0x14);
+	pm8001_ha->gs_tbl.pm8001_tbl.phy_state[0]	=
+				pm8001_mr32(address, 0x18);
+	pm8001_ha->gs_tbl.pm8001_tbl.phy_state[1]	=
+				pm8001_mr32(address, 0x1C);
+	pm8001_ha->gs_tbl.pm8001_tbl.phy_state[2]	=
+				pm8001_mr32(address, 0x20);
+	pm8001_ha->gs_tbl.pm8001_tbl.phy_state[3]	=
+				pm8001_mr32(address, 0x24);
+	pm8001_ha->gs_tbl.pm8001_tbl.phy_state[4]	=
+				pm8001_mr32(address, 0x28);
+	pm8001_ha->gs_tbl.pm8001_tbl.phy_state[5]	=
+				pm8001_mr32(address, 0x2C);
+	pm8001_ha->gs_tbl.pm8001_tbl.phy_state[6]	=
+				pm8001_mr32(address, 0x30);
+	pm8001_ha->gs_tbl.pm8001_tbl.phy_state[7]	=
+				pm8001_mr32(address, 0x34);
+	pm8001_ha->gs_tbl.pm8001_tbl.gpio_input_val	=
+				pm8001_mr32(address, 0x38);
+	pm8001_ha->gs_tbl.pm8001_tbl.rsvd1[0]		=
+				pm8001_mr32(address, 0x3C);
+	pm8001_ha->gs_tbl.pm8001_tbl.rsvd1[1]		=
+				pm8001_mr32(address, 0x40);
+	pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[0]	=
+				pm8001_mr32(address, 0x44);
+	pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[1]	=
+				pm8001_mr32(address, 0x48);
+	pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[2]	=
+				pm8001_mr32(address, 0x4C);
+	pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[3]	=
+				pm8001_mr32(address, 0x50);
+	pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[4]	=
+				pm8001_mr32(address, 0x54);
+	pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[5]	=
+				pm8001_mr32(address, 0x58);
+	pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[6]	=
+				pm8001_mr32(address, 0x5C);
+	pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[7]	=
+				pm8001_mr32(address, 0x60);
+}
+
+/**
+ * read_inbnd_queue_table - read the inbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+	int i;
+	void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+	for (i = 0; i < PM8001_MAX_INB_NUM; i++) {
+		u32 offset = i * 0x20;
+		pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+		      get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
+		pm8001_ha->inbnd_q_tbl[i].pi_offset =
+			pm8001_mr32(address, (offset + 0x18));
+	}
+}
+
+/**
+ * read_outbnd_queue_table - read the outbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+	int i;
+	void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+	for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) {
+		u32 offset = i * 0x24;
+		pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+		      get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
+		pm8001_ha->outbnd_q_tbl[i].ci_offset =
+			pm8001_mr32(address, (offset + 0x18));
+	}
+}
+
+/**
+ * init_default_table_values - init the default table.
+ * @pm8001_ha: our hba card information
+ */
+static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+{
+	int i;
+	u32 offsetib, offsetob;
+	void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
+	void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
+
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.inbound_q_nppd_hppd		= 0;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid0_3	= 0;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid4_7	= 0;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid0_3	= 0;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid4_7	= 0;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ITNexus_event_pid0_3 =
+									 0;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ITNexus_event_pid4_7 =
+									 0;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ssp_event_pid0_3 = 0;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ssp_event_pid4_7 = 0;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_smp_event_pid0_3 = 0;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_smp_event_pid4_7 = 0;
+
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_event_log_addr		=
+		pm8001_ha->memoryMap.region[AAP1].phys_addr_hi;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_event_log_addr		=
+		pm8001_ha->memoryMap.region[AAP1].phys_addr_lo;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_size		=
+		PM8001_EVENT_LOG_SIZE;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_option		= 0x01;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_iop_event_log_addr	=
+		pm8001_ha->memoryMap.region[IOP].phys_addr_hi;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_iop_event_log_addr	=
+		pm8001_ha->memoryMap.region[IOP].phys_addr_lo;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_size		=
+		PM8001_EVENT_LOG_SIZE;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_option		= 0x01;
+	pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt		= 0x01;
+	for (i = 0; i < PM8001_MAX_INB_NUM; i++) {
+		pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt	=
+			PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
+		pm8001_ha->inbnd_q_tbl[i].upper_base_addr	=
+			pm8001_ha->memoryMap.region[IB + i].phys_addr_hi;
+		pm8001_ha->inbnd_q_tbl[i].lower_base_addr	=
+		pm8001_ha->memoryMap.region[IB + i].phys_addr_lo;
+		pm8001_ha->inbnd_q_tbl[i].base_virt		=
+			(u8 *)pm8001_ha->memoryMap.region[IB + i].virt_ptr;
+		pm8001_ha->inbnd_q_tbl[i].total_length		=
+			pm8001_ha->memoryMap.region[IB + i].total_len;
+		pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr	=
+			pm8001_ha->memoryMap.region[CI + i].phys_addr_hi;
+		pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr	=
+			pm8001_ha->memoryMap.region[CI + i].phys_addr_lo;
+		pm8001_ha->inbnd_q_tbl[i].ci_virt		=
+			pm8001_ha->memoryMap.region[CI + i].virt_ptr;
+		offsetib = i * 0x20;
+		pm8001_ha->inbnd_q_tbl[i].pi_pci_bar		=
+			get_pci_bar_index(pm8001_mr32(addressib,
+				(offsetib + 0x14)));
+		pm8001_ha->inbnd_q_tbl[i].pi_offset		=
+			pm8001_mr32(addressib, (offsetib + 0x18));
+		pm8001_ha->inbnd_q_tbl[i].producer_idx		= 0;
+		pm8001_ha->inbnd_q_tbl[i].consumer_index	= 0;
+	}
+	for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) {
+		pm8001_ha->outbnd_q_tbl[i].element_size_cnt	=
+			PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
+		pm8001_ha->outbnd_q_tbl[i].upper_base_addr	=
+			pm8001_ha->memoryMap.region[OB + i].phys_addr_hi;
+		pm8001_ha->outbnd_q_tbl[i].lower_base_addr	=
+			pm8001_ha->memoryMap.region[OB + i].phys_addr_lo;
+		pm8001_ha->outbnd_q_tbl[i].base_virt		=
+			(u8 *)pm8001_ha->memoryMap.region[OB + i].virt_ptr;
+		pm8001_ha->outbnd_q_tbl[i].total_length		=
+			pm8001_ha->memoryMap.region[OB + i].total_len;
+		pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr	=
+			pm8001_ha->memoryMap.region[PI + i].phys_addr_hi;
+		pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr	=
+			pm8001_ha->memoryMap.region[PI + i].phys_addr_lo;
+		pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay	=
+			0 | (10 << 16) | (i << 24);
+		pm8001_ha->outbnd_q_tbl[i].pi_virt		=
+			pm8001_ha->memoryMap.region[PI + i].virt_ptr;
+		offsetob = i * 0x24;
+		pm8001_ha->outbnd_q_tbl[i].ci_pci_bar		=
+			get_pci_bar_index(pm8001_mr32(addressob,
+			offsetob + 0x14));
+		pm8001_ha->outbnd_q_tbl[i].ci_offset		=
+			pm8001_mr32(addressob, (offsetob + 0x18));
+		pm8001_ha->outbnd_q_tbl[i].consumer_idx		= 0;
+		pm8001_ha->outbnd_q_tbl[i].producer_index	= 0;
+	}
+}
+
+/**
+ * update_main_config_table - update the main default table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+	void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+	pm8001_mw32(address, 0x24,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.inbound_q_nppd_hppd);
+	pm8001_mw32(address, 0x28,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid0_3);
+	pm8001_mw32(address, 0x2C,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid4_7);
+	pm8001_mw32(address, 0x30,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid0_3);
+	pm8001_mw32(address, 0x34,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid4_7);
+	pm8001_mw32(address, 0x38,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.
+					outbound_tgt_ITNexus_event_pid0_3);
+	pm8001_mw32(address, 0x3C,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.
+					outbound_tgt_ITNexus_event_pid4_7);
+	pm8001_mw32(address, 0x40,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.
+					outbound_tgt_ssp_event_pid0_3);
+	pm8001_mw32(address, 0x44,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.
+					outbound_tgt_ssp_event_pid4_7);
+	pm8001_mw32(address, 0x48,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.
+					outbound_tgt_smp_event_pid0_3);
+	pm8001_mw32(address, 0x4C,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.
+					outbound_tgt_smp_event_pid4_7);
+	pm8001_mw32(address, 0x50,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_event_log_addr);
+	pm8001_mw32(address, 0x54,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_event_log_addr);
+	pm8001_mw32(address, 0x58,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_size);
+	pm8001_mw32(address, 0x5C,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_option);
+	pm8001_mw32(address, 0x60,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_iop_event_log_addr);
+	pm8001_mw32(address, 0x64,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_iop_event_log_addr);
+	pm8001_mw32(address, 0x68,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_size);
+	pm8001_mw32(address, 0x6C,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_option);
+	pm8001_mw32(address, 0x70,
+		pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt);
+}
+
+/**
+ * update_inbnd_queue_table - update the inbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+				     int number)
+{
+	void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+	u16 offset = number * 0x20;
+	pm8001_mw32(address, offset + 0x00,
+		pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
+	pm8001_mw32(address, offset + 0x04,
+		pm8001_ha->inbnd_q_tbl[number].upper_base_addr);
+	pm8001_mw32(address, offset + 0x08,
+		pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
+	pm8001_mw32(address, offset + 0x0C,
+		pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr);
+	pm8001_mw32(address, offset + 0x10,
+		pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
+}
+
+/**
+ * update_outbnd_queue_table - update the outbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+				      int number)
+{
+	void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+	u16 offset = number * 0x24;
+	pm8001_mw32(address, offset + 0x00,
+		pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
+	pm8001_mw32(address, offset + 0x04,
+		pm8001_ha->outbnd_q_tbl[number].upper_base_addr);
+	pm8001_mw32(address, offset + 0x08,
+		pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
+	pm8001_mw32(address, offset + 0x0C,
+		pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr);
+	pm8001_mw32(address, offset + 0x10,
+		pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
+	pm8001_mw32(address, offset + 0x1C,
+		pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay);
+}
+
+/**
+ * pm8001_bar4_shift - function is called to shift BAR base address
+ * @pm8001_ha : our hba card infomation
+ * @shiftValue : shifting value in memory bar.
+ */
+int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
+{
+	u32 regVal;
+	unsigned long start;
+
+	/* program the inbound AXI translation Lower Address */
+	pm8001_cw32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW, shiftValue);
+
+	/* confirm the setting is written */
+	start = jiffies + HZ; /* 1 sec */
+	do {
+		regVal = pm8001_cr32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW);
+	} while ((regVal != shiftValue) && time_before(jiffies, start));
+
+	if (regVal != shiftValue) {
+		PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW"
+			" = 0x%x\n", regVal));
+		return -1;
+	}
+	return 0;
+}
+
+/**
+ * mpi_set_phys_g3_with_ssc
+ * @pm8001_ha: our hba card information
+ * @SSCbit: set SSCbit to 0 to disable all phys ssc; 1 to enable all phys ssc.
+ */
+static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha,
+				     u32 SSCbit)
+{
+	u32 value, offset, i;
+	unsigned long flags;
+
+#define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000
+#define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000
+#define SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET 0x1074
+#define SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET 0x1074
+#define PHY_G3_WITHOUT_SSC_BIT_SHIFT 12
+#define PHY_G3_WITH_SSC_BIT_SHIFT 13
+#define SNW3_PHY_CAPABILITIES_PARITY 31
+
+   /*
+    * Using shifted destination address 0x3_0000:0x1074 + 0x4000*N (N=0:3)
+    * Using shifted destination address 0x4_0000:0x1074 + 0x4000*(N-4) (N=4:7)
+    */
+	spin_lock_irqsave(&pm8001_ha->lock, flags);
+	if (-1 == pm8001_bar4_shift(pm8001_ha,
+				SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR)) {
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		return;
+	}
+
+	for (i = 0; i < 4; i++) {
+		offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i;
+		pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
+	}
+	/* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */
+	if (-1 == pm8001_bar4_shift(pm8001_ha,
+				SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR)) {
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		return;
+	}
+	for (i = 4; i < 8; i++) {
+		offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
+		pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
+	}
+	/*************************************************************
+	Change the SSC upspreading value to 0x0 so that upspreading is disabled.
+	Device MABC SMOD0 Controls
+	Address: (via MEMBASE-III):
+	Using shifted destination address 0x0_0000: with Offset 0xD8
+
+	31:28 R/W Reserved Do not change
+	27:24 R/W SAS_SMOD_SPRDUP 0000
+	23:20 R/W SAS_SMOD_SPRDDN 0000
+	19:0  R/W  Reserved Do not change
+	Upon power-up this register will read as 0x8990c016,
+	and I would like you to change the SAS_SMOD_SPRDUP bits to 0b0000
+	so that the written value will be 0x8090c016.
+	This will ensure only down-spreading SSC is enabled on the SPC.
+	*************************************************************/
+	value = pm8001_cr32(pm8001_ha, 2, 0xd8);
+	pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016);
+
+	/*set the shifted destination address to 0x0 to avoid error operation */
+	pm8001_bar4_shift(pm8001_ha, 0x0);
+	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+	return;
+}
+
+/**
+ * mpi_set_open_retry_interval_reg
+ * @pm8001_ha: our hba card information
+ * @interval - interval time for each OPEN_REJECT (RETRY). The units are in 1us.
+ */
+static void mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
+					    u32 interval)
+{
+	u32 offset;
+	u32 value;
+	u32 i;
+	unsigned long flags;
+
+#define OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR 0x00030000
+#define OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR 0x00040000
+#define OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET 0x30B4
+#define OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET 0x30B4
+#define OPEN_RETRY_INTERVAL_REG_MASK 0x0000FFFF
+
+	value = interval & OPEN_RETRY_INTERVAL_REG_MASK;
+	spin_lock_irqsave(&pm8001_ha->lock, flags);
+	/* shift bar and set the OPEN_REJECT(RETRY) interval time of PHY 0 -3.*/
+	if (-1 == pm8001_bar4_shift(pm8001_ha,
+			     OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR)) {
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		return;
+	}
+	for (i = 0; i < 4; i++) {
+		offset = OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET + 0x4000 * i;
+		pm8001_cw32(pm8001_ha, 2, offset, value);
+	}
+
+	if (-1 == pm8001_bar4_shift(pm8001_ha,
+			     OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR)) {
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		return;
+	}
+	for (i = 4; i < 8; i++) {
+		offset = OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
+		pm8001_cw32(pm8001_ha, 2, offset, value);
+	}
+	/*set the shifted destination address to 0x0 to avoid error operation */
+	pm8001_bar4_shift(pm8001_ha, 0x0);
+	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+	return;
+}
+
+/**
+ * mpi_init_check - check firmware initialization status.
+ * @pm8001_ha: our hba card information
+ */
+static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 max_wait_count;
+	u32 value;
+	u32 gst_len_mpistate;
+	/* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the
+	table is updated */
+	pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPC_MSGU_CFG_TABLE_UPDATE);
+	/* wait until Inbound DoorBell Clear Register toggled */
+	max_wait_count = 1 * 1000 * 1000;/* 1 sec */
+	do {
+		udelay(1);
+		value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+		value &= SPC_MSGU_CFG_TABLE_UPDATE;
+	} while ((value != 0) && (--max_wait_count));
+
+	if (!max_wait_count)
+		return -1;
+	/* check the MPI-State for initialization */
+	gst_len_mpistate =
+		pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+		GST_GSTLEN_MPIS_OFFSET);
+	if (GST_MPI_STATE_INIT != (gst_len_mpistate & GST_MPI_STATE_MASK))
+		return -1;
+	/* check MPI Initialization error */
+	gst_len_mpistate = gst_len_mpistate >> 16;
+	if (0x0000 != gst_len_mpistate)
+		return -1;
+	return 0;
+}
+
+/**
+ * check_fw_ready - The LLDD check if the FW is ready, if not, return error.
+ * @pm8001_ha: our hba card information
+ */
+static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 value, value1;
+	u32 max_wait_count;
+	/* check error state */
+	value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+	value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+	/* check AAP error */
+	if (SCRATCH_PAD1_ERR == (value & SCRATCH_PAD_STATE_MASK)) {
+		/* error state */
+		value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+		return -1;
+	}
+
+	/* check IOP error */
+	if (SCRATCH_PAD2_ERR == (value1 & SCRATCH_PAD_STATE_MASK)) {
+		/* error state */
+		value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
+		return -1;
+	}
+
+	/* bit 4-31 of scratch pad1 should be zeros if it is not
+	in error state*/
+	if (value & SCRATCH_PAD1_STATE_MASK) {
+		/* error case */
+		pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+		return -1;
+	}
+
+	/* bit 2, 4-31 of scratch pad2 should be zeros if it is not
+	in error state */
+	if (value1 & SCRATCH_PAD2_STATE_MASK) {
+		/* error case */
+		return -1;
+	}
+
+	max_wait_count = 1 * 1000 * 1000;/* 1 sec timeout */
+
+	/* wait until scratch pad 1 and 2 registers in ready state  */
+	do {
+		udelay(1);
+		value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)
+			& SCRATCH_PAD1_RDY;
+		value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
+			& SCRATCH_PAD2_RDY;
+		if ((--max_wait_count) == 0)
+			return -1;
+	} while ((value != SCRATCH_PAD1_RDY) || (value1 != SCRATCH_PAD2_RDY));
+	return 0;
+}
+
+static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
+{
+	void __iomem *base_addr;
+	u32	value;
+	u32	offset;
+	u32	pcibar;
+	u32	pcilogic;
+
+	value = pm8001_cr32(pm8001_ha, 0, 0x44);
+	offset = value & 0x03FFFFFF;
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("Scratchpad 0 Offset: %x\n", offset));
+	pcilogic = (value & 0xFC000000) >> 26;
+	pcibar = get_pci_bar_index(pcilogic);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar));
+	pm8001_ha->main_cfg_tbl_addr = base_addr =
+		pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
+	pm8001_ha->general_stat_tbl_addr =
+		base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x18);
+	pm8001_ha->inbnd_q_tbl_addr =
+		base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C);
+	pm8001_ha->outbnd_q_tbl_addr =
+		base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x20);
+}
+
+/**
+ * pm8001_chip_init - the main init function that initialize whole PM8001 chip.
+ * @pm8001_ha: our hba card information
+ */
+static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
+{
+	u8 i = 0;
+	u16 deviceid;
+	pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
+	/* 8081 controllers need BAR shift to access MPI space
+	* as this is shared with BIOS data */
+	if (deviceid == 0x8081 || deviceid == 0x0042) {
+		if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) {
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("Shift Bar4 to 0x%x failed\n",
+					GSM_SM_BASE));
+			return -1;
+		}
+	}
+	/* check the firmware status */
+	if (-1 == check_fw_ready(pm8001_ha)) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Firmware is not ready!\n"));
+		return -EBUSY;
+	}
+
+	/* Initialize pci space address eg: mpi offset */
+	init_pci_device_addresses(pm8001_ha);
+	init_default_table_values(pm8001_ha);
+	read_main_config_table(pm8001_ha);
+	read_general_status_table(pm8001_ha);
+	read_inbnd_queue_table(pm8001_ha);
+	read_outbnd_queue_table(pm8001_ha);
+	/* update main config table ,inbound table and outbound table */
+	update_main_config_table(pm8001_ha);
+	for (i = 0; i < PM8001_MAX_INB_NUM; i++)
+		update_inbnd_queue_table(pm8001_ha, i);
+	for (i = 0; i < PM8001_MAX_OUTB_NUM; i++)
+		update_outbnd_queue_table(pm8001_ha, i);
+	/* 8081 controller donot require these operations */
+	if (deviceid != 0x8081 && deviceid != 0x0042) {
+		mpi_set_phys_g3_with_ssc(pm8001_ha, 0);
+		/* 7->130ms, 34->500ms, 119->1.5s */
+		mpi_set_open_retry_interval_reg(pm8001_ha, 119);
+	}
+	/* notify firmware update finished and check initialization status */
+	if (0 == mpi_init_check(pm8001_ha)) {
+		PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("MPI initialize successful!\n"));
+	} else
+		return -EBUSY;
+	/*This register is a 16-bit timer with a resolution of 1us. This is the
+	timer used for interrupt delay/coalescing in the PCIe Application Layer.
+	Zero is not a valid value. A value of 1 in the register will cause the
+	interrupts to be normal. A value greater than 1 will cause coalescing
+	delays.*/
+	pm8001_cw32(pm8001_ha, 1, 0x0033c0, 0x1);
+	pm8001_cw32(pm8001_ha, 1, 0x0033c4, 0x0);
+	return 0;
+}
+
+static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 max_wait_count;
+	u32 value;
+	u32 gst_len_mpistate;
+	u16 deviceid;
+	pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
+	if (deviceid == 0x8081 || deviceid == 0x0042) {
+		if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) {
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("Shift Bar4 to 0x%x failed\n",
+					GSM_SM_BASE));
+			return -1;
+		}
+	}
+	init_pci_device_addresses(pm8001_ha);
+	/* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the
+	table is stop */
+	pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPC_MSGU_CFG_TABLE_RESET);
+
+	/* wait until Inbound DoorBell Clear Register toggled */
+	max_wait_count = 1 * 1000 * 1000;/* 1 sec */
+	do {
+		udelay(1);
+		value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+		value &= SPC_MSGU_CFG_TABLE_RESET;
+	} while ((value != 0) && (--max_wait_count));
+
+	if (!max_wait_count) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("TIMEOUT:IBDB value/=0x%x\n", value));
+		return -1;
+	}
+
+	/* check the MPI-State for termination in progress */
+	/* wait until Inbound DoorBell Clear Register toggled */
+	max_wait_count = 1 * 1000 * 1000;  /* 1 sec */
+	do {
+		udelay(1);
+		gst_len_mpistate =
+			pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+			GST_GSTLEN_MPIS_OFFSET);
+		if (GST_MPI_STATE_UNINIT ==
+			(gst_len_mpistate & GST_MPI_STATE_MASK))
+			break;
+	} while (--max_wait_count);
+	if (!max_wait_count) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk(" TIME OUT MPI State = 0x%x\n",
+				gst_len_mpistate & GST_MPI_STATE_MASK));
+		return -1;
+	}
+	return 0;
+}
+
+/**
+ * soft_reset_ready_check - Function to check FW is ready for soft reset.
+ * @pm8001_ha: our hba card information
+ */
+static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 regVal, regVal1, regVal2;
+	if (mpi_uninit_check(pm8001_ha) != 0) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("MPI state is not ready\n"));
+		return -1;
+	}
+	/* read the scratch pad 2 register bit 2 */
+	regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
+		& SCRATCH_PAD2_FWRDY_RST;
+	if (regVal == SCRATCH_PAD2_FWRDY_RST) {
+		PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("Firmware is ready for reset .\n"));
+	} else {
+		unsigned long flags;
+		/* Trigger NMI twice via RB6 */
+		spin_lock_irqsave(&pm8001_ha->lock, flags);
+		if (-1 == pm8001_bar4_shift(pm8001_ha, RB6_ACCESS_REG)) {
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("Shift Bar4 to 0x%x failed\n",
+					RB6_ACCESS_REG));
+			return -1;
+		}
+		pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET,
+			RB6_MAGIC_NUMBER_RST);
+		pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET, RB6_MAGIC_NUMBER_RST);
+		/* wait for 100 ms */
+		mdelay(100);
+		regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2) &
+			SCRATCH_PAD2_FWRDY_RST;
+		if (regVal != SCRATCH_PAD2_FWRDY_RST) {
+			regVal1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+			regVal2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("TIMEOUT:MSGU_SCRATCH_PAD1"
+				"=0x%x, MSGU_SCRATCH_PAD2=0x%x\n",
+				regVal1, regVal2));
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
+				pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)));
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
+				pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			return -1;
+		}
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+	}
+	return 0;
+}
+
+/**
+ * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all
+ * the FW register status to the originated status.
+ * @pm8001_ha: our hba card information
+ */
+static int
+pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
+{
+	u32	regVal, toggleVal;
+	u32	max_wait_count;
+	u32	regVal1, regVal2, regVal3;
+	u32	signature = 0x252acbcd; /* for host scratch pad0 */
+	unsigned long flags;
+
+	/* step1: Check FW is ready for soft reset */
+	if (soft_reset_ready_check(pm8001_ha) != 0) {
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("FW is not ready\n"));
+		return -1;
+	}
+
+	/* step 2: clear NMI status register on AAP1 and IOP, write the same
+	value to clear */
+	/* map 0x60000 to BAR4(0x20), BAR2(win) */
+	spin_lock_irqsave(&pm8001_ha->lock, flags);
+	if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) {
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Shift Bar4 to 0x%x failed\n",
+			MBIC_AAP1_ADDR_BASE));
+		return -1;
+	}
+	regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("MBIC - NMI Enable VPE0 (IOP)= 0x%x\n", regVal));
+	pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP, 0x0);
+	/* map 0x70000 to BAR4(0x20), BAR2(win) */
+	if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) {
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Shift Bar4 to 0x%x failed\n",
+			MBIC_IOP_ADDR_BASE));
+		return -1;
+	}
+	regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("MBIC - NMI Enable VPE0 (AAP1)= 0x%x\n", regVal));
+	pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1, 0x0);
+
+	regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("PCIE -Event Interrupt Enable = 0x%x\n", regVal));
+	pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE, 0x0);
+
+	regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("PCIE - Event Interrupt  = 0x%x\n", regVal));
+	pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT, regVal);
+
+	regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("PCIE -Error Interrupt Enable = 0x%x\n", regVal));
+	pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE, 0x0);
+
+	regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("PCIE - Error Interrupt = 0x%x\n", regVal));
+	pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT, regVal);
+
+	/* read the scratch pad 1 register bit 2 */
+	regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)
+		& SCRATCH_PAD1_RST;
+	toggleVal = regVal ^ SCRATCH_PAD1_RST;
+
+	/* set signature in host scratch pad0 register to tell SPC that the
+	host performs the soft reset */
+	pm8001_cw32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0, signature);
+
+	/* read required registers for confirmming */
+	/* map 0x0700000 to BAR4(0x20), BAR2(win) */
+	if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Shift Bar4 to 0x%x failed\n",
+			GSM_ADDR_BASE));
+		return -1;
+	}
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x0(0x00007b88)-GSM Configuration and"
+		" Reset = 0x%x\n",
+		pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+
+	/* step 3: host read GSM Configuration and Reset register */
+	regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
+	/* Put those bits to low */
+	/* GSM XCBI offset = 0x70 0000
+	0x00 Bit 13 COM_SLV_SW_RSTB 1
+	0x00 Bit 12 QSSP_SW_RSTB 1
+	0x00 Bit 11 RAAE_SW_RSTB 1
+	0x00 Bit 9 RB_1_SW_RSTB 1
+	0x00 Bit 8 SM_SW_RSTB 1
+	*/
+	regVal &= ~(0x00003b00);
+	/* host write GSM Configuration and Reset register */
+	pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x0 (0x00007b88 ==> 0x00004088) - GSM "
+		"Configuration and Reset is set to = 0x%x\n",
+		pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+
+	/* step 4: */
+	/* disable GSM - Read Address Parity Check */
+	regVal1 = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x700038 - Read Address Parity Check "
+		"Enable = 0x%x\n", regVal1));
+	pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, 0x0);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
+		"is set to = 0x%x\n",
+		pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
+
+	/* disable GSM - Write Address Parity Check */
+	regVal2 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x700040 - Write Address Parity Check"
+		" Enable = 0x%x\n", regVal2));
+	pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, 0x0);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x700040 - Write Address Parity Check "
+		"Enable is set to = 0x%x\n",
+		pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
+
+	/* disable GSM - Write Data Parity Check */
+	regVal3 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x300048 - Write Data Parity Check"
+		" Enable = 0x%x\n", regVal3));
+	pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, 0x0);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x300048 - Write Data Parity Check Enable"
+		"is set to = 0x%x\n",
+	pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
+
+	/* step 5: delay 10 usec */
+	udelay(10);
+	/* step 5-b: set GPIO-0 output control to tristate anyway */
+	if (-1 == pm8001_bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) {
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		PM8001_INIT_DBG(pm8001_ha,
+				pm8001_printk("Shift Bar4 to 0x%x failed\n",
+				GPIO_ADDR_BASE));
+		return -1;
+	}
+	regVal = pm8001_cr32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET);
+		PM8001_INIT_DBG(pm8001_ha,
+				pm8001_printk("GPIO Output Control Register:"
+				" = 0x%x\n", regVal));
+	/* set GPIO-0 output control to tri-state */
+	regVal &= 0xFFFFFFFC;
+	pm8001_cw32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET, regVal);
+
+	/* Step 6: Reset the IOP and AAP1 */
+	/* map 0x00000 to BAR4(0x20), BAR2(win) */
+	if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
+			SPC_TOP_LEVEL_ADDR_BASE));
+		return -1;
+	}
+	regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("Top Register before resetting IOP/AAP1"
+		":= 0x%x\n", regVal));
+	regVal &= ~(SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
+	pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+	/* step 7: Reset the BDMA/OSSP */
+	regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("Top Register before resetting BDMA/OSSP"
+		": = 0x%x\n", regVal));
+	regVal &= ~(SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
+	pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+	/* step 8: delay 10 usec */
+	udelay(10);
+
+	/* step 9: bring the BDMA and OSSP out of reset */
+	regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("Top Register before bringing up BDMA/OSSP"
+		":= 0x%x\n", regVal));
+	regVal |= (SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
+	pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+	/* step 10: delay 10 usec */
+	udelay(10);
+
+	/* step 11: reads and sets the GSM Configuration and Reset Register */
+	/* map 0x0700000 to BAR4(0x20), BAR2(win) */
+	if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
+			GSM_ADDR_BASE));
+		return -1;
+	}
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x0 (0x00007b88)-GSM Configuration and "
+		"Reset = 0x%x\n", pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+	regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
+	/* Put those bits to high */
+	/* GSM XCBI offset = 0x70 0000
+	0x00 Bit 13 COM_SLV_SW_RSTB 1
+	0x00 Bit 12 QSSP_SW_RSTB 1
+	0x00 Bit 11 RAAE_SW_RSTB 1
+	0x00 Bit 9   RB_1_SW_RSTB 1
+	0x00 Bit 8   SM_SW_RSTB 1
+	*/
+	regVal |= (GSM_CONFIG_RESET_VALUE);
+	pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM (0x00004088 ==> 0x00007b88) - GSM"
+		" Configuration and Reset is set to = 0x%x\n",
+		pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+
+	/* step 12: Restore GSM - Read Address Parity Check */
+	regVal = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
+	/* just for debugging */
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
+		" = 0x%x\n", regVal));
+	pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, regVal1);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x700038 - Read Address Parity"
+		" Check Enable is set to = 0x%x\n",
+		pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
+	/* Restore GSM - Write Address Parity Check */
+	regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
+	pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, regVal2);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x700040 - Write Address Parity Check"
+		" Enable is set to = 0x%x\n",
+		pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
+	/* Restore GSM - Write Data Parity Check */
+	regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
+	pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("GSM 0x700048 - Write Data Parity Check Enable"
+		"is set to = 0x%x\n",
+		pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
+
+	/* step 13: bring the IOP and AAP1 out of reset */
+	/* map 0x00000 to BAR4(0x20), BAR2(win) */
+	if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Shift Bar4 to 0x%x failed\n",
+			SPC_TOP_LEVEL_ADDR_BASE));
+		return -1;
+	}
+	regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+	regVal |= (SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
+	pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+	/* step 14: delay 10 usec - Normal Mode */
+	udelay(10);
+	/* check Soft Reset Normal mode or Soft Reset HDA mode */
+	if (signature == SPC_SOFT_RESET_SIGNATURE) {
+		/* step 15 (Normal Mode): wait until scratch pad1 register
+		bit 2 toggled */
+		max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+		do {
+			udelay(1);
+			regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1) &
+				SCRATCH_PAD1_RST;
+		} while ((regVal != toggleVal) && (--max_wait_count));
+
+		if (!max_wait_count) {
+			regVal = pm8001_cr32(pm8001_ha, 0,
+				MSGU_SCRATCH_PAD_1);
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("TIMEOUT : ToggleVal 0x%x,"
+				"MSGU_SCRATCH_PAD1 = 0x%x\n",
+				toggleVal, regVal));
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
+				pm8001_cr32(pm8001_ha, 0,
+				MSGU_SCRATCH_PAD_0)));
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("SCRATCH_PAD2 value = 0x%x\n",
+				pm8001_cr32(pm8001_ha, 0,
+				MSGU_SCRATCH_PAD_2)));
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
+				pm8001_cr32(pm8001_ha, 0,
+				MSGU_SCRATCH_PAD_3)));
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			return -1;
+		}
+
+		/* step 16 (Normal) - Clear ODMR and ODCR */
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+
+		/* step 17 (Normal Mode): wait for the FW and IOP to get
+		ready - 1 sec timeout */
+		/* Wait for the SPC Configuration Table to be ready */
+		if (check_fw_ready(pm8001_ha) == -1) {
+			regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+			/* return error if MPI Configuration Table not ready */
+			PM8001_INIT_DBG(pm8001_ha,
+				pm8001_printk("FW not ready SCRATCH_PAD1"
+				" = 0x%x\n", regVal));
+			regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+			/* return error if MPI Configuration Table not ready */
+			PM8001_INIT_DBG(pm8001_ha,
+				pm8001_printk("FW not ready SCRATCH_PAD2"
+				" = 0x%x\n", regVal));
+			PM8001_INIT_DBG(pm8001_ha,
+				pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
+				pm8001_cr32(pm8001_ha, 0,
+				MSGU_SCRATCH_PAD_0)));
+			PM8001_INIT_DBG(pm8001_ha,
+				pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
+				pm8001_cr32(pm8001_ha, 0,
+				MSGU_SCRATCH_PAD_3)));
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			return -1;
+		}
+	}
+	pm8001_bar4_shift(pm8001_ha, 0);
+	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("SPC soft reset Complete\n"));
+	return 0;
+}
+
+static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 i;
+	u32 regVal;
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("chip reset start\n"));
+
+	/* do SPC chip reset. */
+	regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
+	regVal &= ~(SPC_REG_RESET_DEVICE);
+	pm8001_cw32(pm8001_ha, 1, SPC_REG_RESET, regVal);
+
+	/* delay 10 usec */
+	udelay(10);
+
+	/* bring chip reset out of reset */
+	regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
+	regVal |= SPC_REG_RESET_DEVICE;
+	pm8001_cw32(pm8001_ha, 1, SPC_REG_RESET, regVal);
+
+	/* delay 10 usec */
+	udelay(10);
+
+	/* wait for 20 msec until the firmware gets reloaded */
+	i = 20;
+	do {
+		mdelay(1);
+	} while ((--i) != 0);
+
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("chip reset finished\n"));
+}
+
+/**
+ * pm8001_chip_iounmap - which maped when initialized.
+ * @pm8001_ha: our hba card information
+ */
+void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
+{
+	s8 bar, logical = 0;
+	for (bar = 0; bar < 6; bar++) {
+		/*
+		** logical BARs for SPC:
+		** bar 0 and 1 - logical BAR0
+		** bar 2 and 3 - logical BAR1
+		** bar4 - logical BAR2
+		** bar5 - logical BAR3
+		** Skip the appropriate assignments:
+		*/
+		if ((bar == 1) || (bar == 3))
+			continue;
+		if (pm8001_ha->io_mem[logical].memvirtaddr) {
+			iounmap(pm8001_ha->io_mem[logical].memvirtaddr);
+			logical++;
+		}
+	}
+}
+
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
+{
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+}
+
+ /**
+  * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
+  * @pm8001_ha: our hba card information
+  */
+static void
+pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
+{
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_MASK_ALL);
+}
+
+/**
+ * pm8001_chip_msix_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_msix_interrupt_enable(struct pm8001_hba_info *pm8001_ha,
+	u32 int_vec_idx)
+{
+	u32 msi_index;
+	u32 value;
+	msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
+	msi_index += MSIX_TABLE_BASE;
+	pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_ENABLE);
+	value = (1 << int_vec_idx);
+	pm8001_cw32(pm8001_ha, 0,  MSGU_ODCR, value);
+
+}
+
+/**
+ * pm8001_chip_msix_interrupt_disable - disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_msix_interrupt_disable(struct pm8001_hba_info *pm8001_ha,
+	u32 int_vec_idx)
+{
+	u32 msi_index;
+	msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
+	msi_index += MSIX_TABLE_BASE;
+	pm8001_cw32(pm8001_ha, 0,  msi_index, MSIX_INTERRUPT_DISABLE);
+}
+
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+	pm8001_chip_msix_interrupt_enable(pm8001_ha, 0);
+	return;
+#endif
+	pm8001_chip_intx_interrupt_enable(pm8001_ha);
+
+}
+
+/**
+ * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+	pm8001_chip_msix_interrupt_disable(pm8001_ha, 0);
+	return;
+#endif
+	pm8001_chip_intx_interrupt_disable(pm8001_ha);
+
+}
+
+/**
+ * pm8001_mpi_msg_free_get - get the free message buffer for transfer
+ * inbound queue.
+ * @circularQ: the inbound queue  we want to transfer to HBA.
+ * @messageSize: the message size of this transfer, normally it is 64 bytes
+ * @messagePtr: the pointer to message.
+ */
+int pm8001_mpi_msg_free_get(struct inbound_queue_table *circularQ,
+			    u16 messageSize, void **messagePtr)
+{
+	u32 offset, consumer_index;
+	struct mpi_msg_hdr *msgHeader;
+	u8 bcCount = 1; /* only support single buffer */
+
+	/* Checks is the requested message size can be allocated in this queue*/
+	if (messageSize > IOMB_SIZE_SPCV) {
+		*messagePtr = NULL;
+		return -1;
+	}
+
+	/* Stores the new consumer index */
+	consumer_index = pm8001_read_32(circularQ->ci_virt);
+	circularQ->consumer_index = cpu_to_le32(consumer_index);
+	if (((circularQ->producer_idx + bcCount) % PM8001_MPI_QUEUE) ==
+		le32_to_cpu(circularQ->consumer_index)) {
+		*messagePtr = NULL;
+		return -1;
+	}
+	/* get memory IOMB buffer address */
+	offset = circularQ->producer_idx * messageSize;
+	/* increment to next bcCount element */
+	circularQ->producer_idx = (circularQ->producer_idx + bcCount)
+				% PM8001_MPI_QUEUE;
+	/* Adds that distance to the base of the region virtual address plus
+	the message header size*/
+	msgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt	+ offset);
+	*messagePtr = ((void *)msgHeader) + sizeof(struct mpi_msg_hdr);
+	return 0;
+}
+
+/**
+ * pm8001_mpi_build_cmd- build the message queue for transfer, update the PI to
+ * FW to tell the fw to get this message from IOMB.
+ * @pm8001_ha: our hba card information
+ * @circularQ: the inbound queue we want to transfer to HBA.
+ * @opCode: the operation code represents commands which LLDD and fw recognized.
+ * @payload: the command payload of each operation command.
+ */
+int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
+			 struct inbound_queue_table *circularQ,
+			 u32 opCode, void *payload, u32 responseQueue)
+{
+	u32 Header = 0, hpriority = 0, bc = 1, category = 0x02;
+	void *pMessage;
+
+	if (pm8001_mpi_msg_free_get(circularQ, pm8001_ha->iomb_size,
+		&pMessage) < 0) {
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("No free mpi buffer\n"));
+		return -ENOMEM;
+	}
+	BUG_ON(!payload);
+	/*Copy to the payload*/
+	memcpy(pMessage, payload, (pm8001_ha->iomb_size -
+				sizeof(struct mpi_msg_hdr)));
+
+	/*Build the header*/
+	Header = ((1 << 31) | (hpriority << 30) | ((bc & 0x1f) << 24)
+		| ((responseQueue & 0x3F) << 16)
+		| ((category & 0xF) << 12) | (opCode & 0xFFF));
+
+	pm8001_write_32((pMessage - 4), 0, cpu_to_le32(Header));
+	/*Update the PI to the firmware*/
+	pm8001_cw32(pm8001_ha, circularQ->pi_pci_bar,
+		circularQ->pi_offset, circularQ->producer_idx);
+	PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("INB Q %x OPCODE:%x , UPDATED PI=%d CI=%d\n",
+			responseQueue, opCode, circularQ->producer_idx,
+			circularQ->consumer_index));
+	return 0;
+}
+
+u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
+			    struct outbound_queue_table *circularQ, u8 bc)
+{
+	u32 producer_index;
+	struct mpi_msg_hdr *msgHeader;
+	struct mpi_msg_hdr *pOutBoundMsgHeader;
+
+	msgHeader = (struct mpi_msg_hdr *)(pMsg - sizeof(struct mpi_msg_hdr));
+	pOutBoundMsgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt +
+				circularQ->consumer_idx * pm8001_ha->iomb_size);
+	if (pOutBoundMsgHeader != msgHeader) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("consumer_idx = %d msgHeader = %p\n",
+			circularQ->consumer_idx, msgHeader));
+
+		/* Update the producer index from SPC */
+		producer_index = pm8001_read_32(circularQ->pi_virt);
+		circularQ->producer_index = cpu_to_le32(producer_index);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("consumer_idx = %d producer_index = %d"
+			"msgHeader = %p\n", circularQ->consumer_idx,
+			circularQ->producer_index, msgHeader));
+		return 0;
+	}
+	/* free the circular queue buffer elements associated with the message*/
+	circularQ->consumer_idx = (circularQ->consumer_idx + bc)
+				% PM8001_MPI_QUEUE;
+	/* update the CI of outbound queue */
+	pm8001_cw32(pm8001_ha, circularQ->ci_pci_bar, circularQ->ci_offset,
+		circularQ->consumer_idx);
+	/* Update the producer index from SPC*/
+	producer_index = pm8001_read_32(circularQ->pi_virt);
+	circularQ->producer_index = cpu_to_le32(producer_index);
+	PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk(" CI=%d PI=%d\n", circularQ->consumer_idx,
+		circularQ->producer_index));
+	return 0;
+}
+
+/**
+ * pm8001_mpi_msg_consume- get the MPI message from outbound queue
+ * message table.
+ * @pm8001_ha: our hba card information
+ * @circularQ: the outbound queue  table.
+ * @messagePtr1: the message contents of this outbound message.
+ * @pBC: the message size.
+ */
+u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
+			   struct outbound_queue_table *circularQ,
+			   void **messagePtr1, u8 *pBC)
+{
+	struct mpi_msg_hdr	*msgHeader;
+	__le32	msgHeader_tmp;
+	u32 header_tmp;
+	do {
+		/* If there are not-yet-delivered messages ... */
+		if (le32_to_cpu(circularQ->producer_index)
+			!= circularQ->consumer_idx) {
+			/*Get the pointer to the circular queue buffer element*/
+			msgHeader = (struct mpi_msg_hdr *)
+				(circularQ->base_virt +
+				circularQ->consumer_idx * pm8001_ha->iomb_size);
+			/* read header */
+			header_tmp = pm8001_read_32(msgHeader);
+			msgHeader_tmp = cpu_to_le32(header_tmp);
+			if (0 != (le32_to_cpu(msgHeader_tmp) & 0x80000000)) {
+				if (OPC_OUB_SKIP_ENTRY !=
+					(le32_to_cpu(msgHeader_tmp) & 0xfff)) {
+					*messagePtr1 =
+						((u8 *)msgHeader) +
+						sizeof(struct mpi_msg_hdr);
+					*pBC = (u8)((le32_to_cpu(msgHeader_tmp)
+						>> 24) & 0x1f);
+					PM8001_IO_DBG(pm8001_ha,
+						pm8001_printk(": CI=%d PI=%d "
+						"msgHeader=%x\n",
+						circularQ->consumer_idx,
+						circularQ->producer_index,
+						msgHeader_tmp));
+					return MPI_IO_STATUS_SUCCESS;
+				} else {
+					circularQ->consumer_idx =
+						(circularQ->consumer_idx +
+						((le32_to_cpu(msgHeader_tmp)
+						 >> 24) & 0x1f))
+							% PM8001_MPI_QUEUE;
+					msgHeader_tmp = 0;
+					pm8001_write_32(msgHeader, 0, 0);
+					/* update the CI of outbound queue */
+					pm8001_cw32(pm8001_ha,
+						circularQ->ci_pci_bar,
+						circularQ->ci_offset,
+						circularQ->consumer_idx);
+				}
+			} else {
+				circularQ->consumer_idx =
+					(circularQ->consumer_idx +
+					((le32_to_cpu(msgHeader_tmp) >> 24) &
+					0x1f)) % PM8001_MPI_QUEUE;
+				msgHeader_tmp = 0;
+				pm8001_write_32(msgHeader, 0, 0);
+				/* update the CI of outbound queue */
+				pm8001_cw32(pm8001_ha, circularQ->ci_pci_bar,
+					circularQ->ci_offset,
+					circularQ->consumer_idx);
+				return MPI_IO_STATUS_FAIL;
+			}
+		} else {
+			u32 producer_index;
+			void *pi_virt = circularQ->pi_virt;
+			/* Update the producer index from SPC */
+			producer_index = pm8001_read_32(pi_virt);
+			circularQ->producer_index = cpu_to_le32(producer_index);
+		}
+	} while (le32_to_cpu(circularQ->producer_index) !=
+		circularQ->consumer_idx);
+	/* while we don't have any more not-yet-delivered message */
+	/* report empty */
+	return MPI_IO_STATUS_BUSY;
+}
+
+void pm8001_work_fn(struct work_struct *work)
+{
+	struct pm8001_work *pw = container_of(work, struct pm8001_work, work);
+	struct pm8001_device *pm8001_dev;
+	struct domain_device *dev;
+
+	/*
+	 * So far, all users of this stash an associated structure here.
+	 * If we get here, and this pointer is null, then the action
+	 * was cancelled. This nullification happens when the device
+	 * goes away.
+	 */
+	pm8001_dev = pw->data; /* Most stash device structure */
+	if ((pm8001_dev == NULL)
+	 || ((pw->handler != IO_XFER_ERROR_BREAK)
+	  && (pm8001_dev->dev_type == SAS_PHY_UNUSED))) {
+		kfree(pw);
+		return;
+	}
+
+	switch (pw->handler) {
+	case IO_XFER_ERROR_BREAK:
+	{	/* This one stashes the sas_task instead */
+		struct sas_task *t = (struct sas_task *)pm8001_dev;
+		u32 tag;
+		struct pm8001_ccb_info *ccb;
+		struct pm8001_hba_info *pm8001_ha = pw->pm8001_ha;
+		unsigned long flags, flags1;
+		struct task_status_struct *ts;
+		int i;
+
+		if (pm8001_query_task(t) == TMF_RESP_FUNC_SUCC)
+			break; /* Task still on lu */
+		spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+		spin_lock_irqsave(&t->task_state_lock, flags1);
+		if (unlikely((t->task_state_flags & SAS_TASK_STATE_DONE))) {
+			spin_unlock_irqrestore(&t->task_state_lock, flags1);
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			break; /* Task got completed by another */
+		}
+		spin_unlock_irqrestore(&t->task_state_lock, flags1);
+
+		/* Search for a possible ccb that matches the task */
+		for (i = 0; ccb = NULL, i < PM8001_MAX_CCB; i++) {
+			ccb = &pm8001_ha->ccb_info[i];
+			tag = ccb->ccb_tag;
+			if ((tag != 0xFFFFFFFF) && (ccb->task == t))
+				break;
+		}
+		if (!ccb) {
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			break; /* Task got freed by another */
+		}
+		ts = &t->task_status;
+		ts->resp = SAS_TASK_COMPLETE;
+		/* Force the midlayer to retry */
+		ts->stat = SAS_QUEUE_FULL;
+		pm8001_dev = ccb->device;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		spin_lock_irqsave(&t->task_state_lock, flags1);
+		t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+		t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+		t->task_state_flags |= SAS_TASK_STATE_DONE;
+		if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+			spin_unlock_irqrestore(&t->task_state_lock, flags1);
+			PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p"
+				" done with event 0x%x resp 0x%x stat 0x%x but"
+				" aborted by upper layer!\n",
+				t, pw->handler, ts->resp, ts->stat));
+			pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		} else {
+			spin_unlock_irqrestore(&t->task_state_lock, flags1);
+			pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+			mb();/* in order to force CPU ordering */
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			t->task_done(t);
+		}
+	}	break;
+	case IO_XFER_OPEN_RETRY_TIMEOUT:
+	{	/* This one stashes the sas_task instead */
+		struct sas_task *t = (struct sas_task *)pm8001_dev;
+		u32 tag;
+		struct pm8001_ccb_info *ccb;
+		struct pm8001_hba_info *pm8001_ha = pw->pm8001_ha;
+		unsigned long flags, flags1;
+		int i, ret = 0;
+
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+
+		ret = pm8001_query_task(t);
+
+		PM8001_IO_DBG(pm8001_ha,
+			switch (ret) {
+			case TMF_RESP_FUNC_SUCC:
+				pm8001_printk("...Task on lu\n");
+				break;
+
+			case TMF_RESP_FUNC_COMPLETE:
+				pm8001_printk("...Task NOT on lu\n");
+				break;
+
+			default:
+				pm8001_printk("...query task failed!!!\n");
+				break;
+			});
+
+		spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+		spin_lock_irqsave(&t->task_state_lock, flags1);
+
+		if (unlikely((t->task_state_flags & SAS_TASK_STATE_DONE))) {
+			spin_unlock_irqrestore(&t->task_state_lock, flags1);
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			if (ret == TMF_RESP_FUNC_SUCC) /* task on lu */
+				(void)pm8001_abort_task(t);
+			break; /* Task got completed by another */
+		}
+
+		spin_unlock_irqrestore(&t->task_state_lock, flags1);
+
+		/* Search for a possible ccb that matches the task */
+		for (i = 0; ccb = NULL, i < PM8001_MAX_CCB; i++) {
+			ccb = &pm8001_ha->ccb_info[i];
+			tag = ccb->ccb_tag;
+			if ((tag != 0xFFFFFFFF) && (ccb->task == t))
+				break;
+		}
+		if (!ccb) {
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			if (ret == TMF_RESP_FUNC_SUCC) /* task on lu */
+				(void)pm8001_abort_task(t);
+			break; /* Task got freed by another */
+		}
+
+		pm8001_dev = ccb->device;
+		dev = pm8001_dev->sas_device;
+
+		switch (ret) {
+		case TMF_RESP_FUNC_SUCC: /* task on lu */
+			ccb->open_retry = 1; /* Snub completion */
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			ret = pm8001_abort_task(t);
+			ccb->open_retry = 0;
+			switch (ret) {
+			case TMF_RESP_FUNC_SUCC:
+			case TMF_RESP_FUNC_COMPLETE:
+				break;
+			default: /* device misbehavior */
+				ret = TMF_RESP_FUNC_FAILED;
+				PM8001_IO_DBG(pm8001_ha,
+					pm8001_printk("...Reset phy\n"));
+				pm8001_I_T_nexus_reset(dev);
+				break;
+			}
+			break;
+
+		case TMF_RESP_FUNC_COMPLETE: /* task not on lu */
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			/* Do we need to abort the task locally? */
+			break;
+
+		default: /* device misbehavior */
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			ret = TMF_RESP_FUNC_FAILED;
+			PM8001_IO_DBG(pm8001_ha,
+				pm8001_printk("...Reset phy\n"));
+			pm8001_I_T_nexus_reset(dev);
+		}
+
+		if (ret == TMF_RESP_FUNC_FAILED)
+			t = NULL;
+		pm8001_open_reject_retry(pm8001_ha, t, pm8001_dev);
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("...Complete\n"));
+	}	break;
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+		dev = pm8001_dev->sas_device;
+		pm8001_I_T_nexus_event_handler(dev);
+		break;
+	case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+		dev = pm8001_dev->sas_device;
+		pm8001_I_T_nexus_reset(dev);
+		break;
+	case IO_DS_IN_ERROR:
+		dev = pm8001_dev->sas_device;
+		pm8001_I_T_nexus_reset(dev);
+		break;
+	case IO_DS_NON_OPERATIONAL:
+		dev = pm8001_dev->sas_device;
+		pm8001_I_T_nexus_reset(dev);
+		break;
+	}
+	kfree(pw);
+}
+
+int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha, void *data,
+			       int handler)
+{
+	struct pm8001_work *pw;
+	int ret = 0;
+
+	pw = kmalloc(sizeof(struct pm8001_work), GFP_ATOMIC);
+	if (pw) {
+		pw->pm8001_ha = pm8001_ha;
+		pw->data = data;
+		pw->handler = handler;
+		INIT_WORK(&pw->work, pm8001_work_fn);
+		queue_work(pm8001_wq, &pw->work);
+	} else
+		ret = -ENOMEM;
+
+	return ret;
+}
+
+static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_device *pm8001_ha_dev)
+{
+	int res;
+	u32 ccb_tag;
+	struct pm8001_ccb_info *ccb;
+	struct sas_task *task = NULL;
+	struct task_abort_req task_abort;
+	struct inbound_queue_table *circularQ;
+	u32 opc = OPC_INB_SATA_ABORT;
+	int ret;
+
+	if (!pm8001_ha_dev) {
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n"));
+		return;
+	}
+
+	task = sas_alloc_slow_task(GFP_ATOMIC);
+
+	if (!task) {
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot "
+						"allocate task\n"));
+		return;
+	}
+
+	task->task_done = pm8001_task_done;
+
+	res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+	if (res)
+		return;
+
+	ccb = &pm8001_ha->ccb_info[ccb_tag];
+	ccb->device = pm8001_ha_dev;
+	ccb->ccb_tag = ccb_tag;
+	ccb->task = task;
+
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+	memset(&task_abort, 0, sizeof(task_abort));
+	task_abort.abort_all = cpu_to_le32(1);
+	task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+	task_abort.tag = cpu_to_le32(ccb_tag);
+
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort, 0);
+	if (ret)
+		pm8001_tag_free(pm8001_ha, ccb_tag);
+
+}
+
+static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_device *pm8001_ha_dev)
+{
+	struct sata_start_req sata_cmd;
+	int res;
+	u32 ccb_tag;
+	struct pm8001_ccb_info *ccb;
+	struct sas_task *task = NULL;
+	struct host_to_dev_fis fis;
+	struct domain_device *dev;
+	struct inbound_queue_table *circularQ;
+	u32 opc = OPC_INB_SATA_HOST_OPSTART;
+
+	task = sas_alloc_slow_task(GFP_ATOMIC);
+
+	if (!task) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("cannot allocate task !!!\n"));
+		return;
+	}
+	task->task_done = pm8001_task_done;
+
+	res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+	if (res) {
+		sas_free_task(task);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("cannot allocate tag !!!\n"));
+		return;
+	}
+
+	/* allocate domain device by ourselves as libsas
+	 * is not going to provide any
+	*/
+	dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC);
+	if (!dev) {
+		sas_free_task(task);
+		pm8001_tag_free(pm8001_ha, ccb_tag);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Domain device cannot be allocated\n"));
+		return;
+	}
+	task->dev = dev;
+	task->dev->lldd_dev = pm8001_ha_dev;
+
+	ccb = &pm8001_ha->ccb_info[ccb_tag];
+	ccb->device = pm8001_ha_dev;
+	ccb->ccb_tag = ccb_tag;
+	ccb->task = task;
+	pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
+	pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
+
+	memset(&sata_cmd, 0, sizeof(sata_cmd));
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+	/* construct read log FIS */
+	memset(&fis, 0, sizeof(struct host_to_dev_fis));
+	fis.fis_type = 0x27;
+	fis.flags = 0x80;
+	fis.command = ATA_CMD_READ_LOG_EXT;
+	fis.lbal = 0x10;
+	fis.sector_count = 0x1;
+
+	sata_cmd.tag = cpu_to_le32(ccb_tag);
+	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+	sata_cmd.ncqtag_atap_dir_m |= ((0x1 << 7) | (0x5 << 9));
+	memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
+
+	res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, 0);
+	if (res) {
+		sas_free_task(task);
+		pm8001_tag_free(pm8001_ha, ccb_tag);
+		kfree(dev);
+	}
+}
+
+/**
+ * mpi_ssp_completion- process the event that FW response to the SSP request.
+ * @pm8001_ha: our hba card information
+ * @piomb: the message contents of this outbound message.
+ *
+ * When FW has completed a ssp request for example a IO request, after it has
+ * filled the SG data with the data, it will trigger this event represent
+ * that he has finished the job,please check the coresponding buffer.
+ * So we will tell the caller who maybe waiting the result to tell upper layer
+ * that the task has been finished.
+ */
+static void
+mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+	struct sas_task *t;
+	struct pm8001_ccb_info *ccb;
+	unsigned long flags;
+	u32 status;
+	u32 param;
+	u32 tag;
+	struct ssp_completion_resp *psspPayload;
+	struct task_status_struct *ts;
+	struct ssp_response_iu *iu;
+	struct pm8001_device *pm8001_dev;
+	psspPayload = (struct ssp_completion_resp *)(piomb + 4);
+	status = le32_to_cpu(psspPayload->status);
+	tag = le32_to_cpu(psspPayload->tag);
+	ccb = &pm8001_ha->ccb_info[tag];
+	if ((status == IO_ABORTED) && ccb->open_retry) {
+		/* Being completed by another */
+		ccb->open_retry = 0;
+		return;
+	}
+	pm8001_dev = ccb->device;
+	param = le32_to_cpu(psspPayload->param);
+
+	t = ccb->task;
+
+	if (status && status != IO_UNDERFLOW)
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("sas IO status 0x%x\n", status));
+	if (unlikely(!t || !t->lldd_task || !t->dev))
+		return;
+	ts = &t->task_status;
+	/* Print sas address of IO failed device */
+	if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+		(status != IO_UNDERFLOW))
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("SAS Address of IO Failure Drive:"
+			"%016llx", SAS_ADDR(t->dev->sas_addr)));
+
+	switch (status) {
+	case IO_SUCCESS:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS"
+			",param = %d\n", param));
+		if (param == 0) {
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAM_STAT_GOOD;
+		} else {
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAS_PROTO_RESPONSE;
+			ts->residual = param;
+			iu = &psspPayload->ssp_resp_iu;
+			sas_ssp_task_response(pm8001_ha->dev, t, iu);
+		}
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_ABORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_ABORTED IOMB Tag\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_ABORTED_TASK;
+		break;
+	case IO_UNDERFLOW:
+		/* SSP Completion with error */
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW"
+			",param = %d\n", param));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_UNDERRUN;
+		ts->residual = param;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_NO_DEVICE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_NO_DEVICE\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_PHY_DOWN;
+		break;
+	case IO_XFER_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		/* Force the midlayer to retry */
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_XFER_ERROR_PHY_NOT_READY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_EPROTO;
+		break;
+	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		if (!t->uldd_task)
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+		break;
+	case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+		break;
+	case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+			"NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		break;
+	case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		break;
+	case IO_XFER_ERROR_NAK_RECEIVED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_ERROR_DMA:
+		PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("IO_XFER_ERROR_DMA\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_XFER_OPEN_RETRY_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_XFER_ERROR_OFFSET_MISMATCH:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_PORT_IN_RESET:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_PORT_IN_RESET\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_DS_NON_OPERATIONAL:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		if (!t->uldd_task)
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_DS_NON_OPERATIONAL);
+		break;
+	case IO_DS_IN_RECOVERY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_IN_RECOVERY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_TM_TAG_NOT_FOUND:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	default:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("Unknown status 0x%x\n", status));
+		/* not allowed case. Therefore, return failed status */
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	}
+	PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("scsi_status = %x\n ",
+		psspPayload->ssp_resp_iu.status));
+	spin_lock_irqsave(&t->task_state_lock, flags);
+	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+	t->task_state_flags |= SAS_TASK_STATE_DONE;
+	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
+			" io_status 0x%x resp 0x%x "
+			"stat 0x%x but aborted by upper layer!\n",
+			t, status, ts->resp, ts->stat));
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+	} else {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+		mb();/* in order to force CPU ordering */
+		t->task_done(t);
+	}
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+	struct sas_task *t;
+	unsigned long flags;
+	struct task_status_struct *ts;
+	struct pm8001_ccb_info *ccb;
+	struct pm8001_device *pm8001_dev;
+	struct ssp_event_resp *psspPayload =
+		(struct ssp_event_resp *)(piomb + 4);
+	u32 event = le32_to_cpu(psspPayload->event);
+	u32 tag = le32_to_cpu(psspPayload->tag);
+	u32 port_id = le32_to_cpu(psspPayload->port_id);
+	u32 dev_id = le32_to_cpu(psspPayload->device_id);
+
+	ccb = &pm8001_ha->ccb_info[tag];
+	t = ccb->task;
+	pm8001_dev = ccb->device;
+	if (event)
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("sas IO status 0x%x\n", event));
+	if (unlikely(!t || !t->lldd_task || !t->dev))
+		return;
+	ts = &t->task_status;
+	PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("port_id = %x,device_id = %x\n",
+		port_id, dev_id));
+	switch (event) {
+	case IO_OVERFLOW:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");)
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		ts->residual = 0;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_XFER_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+		pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK);
+		return;
+	case IO_XFER_ERROR_PHY_NOT_READY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
+			"_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_EPROTO;
+		break;
+	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		if (!t->uldd_task)
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+		break;
+	case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+		break;
+	case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+			"NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		break;
+	case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+		       pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		break;
+	case IO_XFER_ERROR_NAK_RECEIVED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_OPEN_RETRY_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+		pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT);
+		return;
+	case IO_XFER_ERROR_UNEXPECTED_PHASE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+		PM8001_IO_DBG(pm8001_ha,
+		       pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_ERROR_OFFSET_MISMATCH:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_CMD_FRAME_ISSUED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("  IO_XFER_CMD_FRAME_ISSUED\n"));
+		return;
+	default:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("Unknown status 0x%x\n", event));
+		/* not allowed case. Therefore, return failed status */
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	}
+	spin_lock_irqsave(&t->task_state_lock, flags);
+	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+	t->task_state_flags |= SAS_TASK_STATE_DONE;
+	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
+			" event 0x%x resp 0x%x "
+			"stat 0x%x but aborted by upper layer!\n",
+			t, event, ts->resp, ts->stat));
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+	} else {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+		mb();/* in order to force CPU ordering */
+		t->task_done(t);
+	}
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct sas_task *t;
+	struct pm8001_ccb_info *ccb;
+	u32 param;
+	u32 status;
+	u32 tag;
+	int i, j;
+	u8 sata_addr_low[4];
+	u32 temp_sata_addr_low;
+	u8 sata_addr_hi[4];
+	u32 temp_sata_addr_hi;
+	struct sata_completion_resp *psataPayload;
+	struct task_status_struct *ts;
+	struct ata_task_resp *resp ;
+	u32 *sata_resp;
+	struct pm8001_device *pm8001_dev;
+	unsigned long flags;
+
+	psataPayload = (struct sata_completion_resp *)(piomb + 4);
+	status = le32_to_cpu(psataPayload->status);
+	tag = le32_to_cpu(psataPayload->tag);
+
+	if (!tag) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("tag null\n"));
+		return;
+	}
+	ccb = &pm8001_ha->ccb_info[tag];
+	param = le32_to_cpu(psataPayload->param);
+	if (ccb) {
+		t = ccb->task;
+		pm8001_dev = ccb->device;
+	} else {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("ccb null\n"));
+		return;
+	}
+
+	if (t) {
+		if (t->dev && (t->dev->lldd_dev))
+			pm8001_dev = t->dev->lldd_dev;
+	} else {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("task null\n"));
+		return;
+	}
+
+	if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
+		&& unlikely(!t || !t->lldd_task || !t->dev)) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("task or dev null\n"));
+		return;
+	}
+
+	ts = &t->task_status;
+	if (!ts) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("ts null\n"));
+		return;
+	}
+	/* Print sas address of IO failed device */
+	if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+		(status != IO_UNDERFLOW)) {
+		if (!((t->dev->parent) &&
+			(DEV_IS_EXPANDER(t->dev->parent->dev_type)))) {
+			for (i = 0 , j = 4; j <= 7 && i <= 3; i++ , j++)
+				sata_addr_low[i] = pm8001_ha->sas_addr[j];
+			for (i = 0 , j = 0; j <= 3 && i <= 3; i++ , j++)
+				sata_addr_hi[i] = pm8001_ha->sas_addr[j];
+			memcpy(&temp_sata_addr_low, sata_addr_low,
+				sizeof(sata_addr_low));
+			memcpy(&temp_sata_addr_hi, sata_addr_hi,
+				sizeof(sata_addr_hi));
+			temp_sata_addr_hi = (((temp_sata_addr_hi >> 24) & 0xff)
+						|((temp_sata_addr_hi << 8) &
+						0xff0000) |
+						((temp_sata_addr_hi >> 8)
+						& 0xff00) |
+						((temp_sata_addr_hi << 24) &
+						0xff000000));
+			temp_sata_addr_low = ((((temp_sata_addr_low >> 24)
+						& 0xff) |
+						((temp_sata_addr_low << 8)
+						& 0xff0000) |
+						((temp_sata_addr_low >> 8)
+						& 0xff00) |
+						((temp_sata_addr_low << 24)
+						& 0xff000000)) +
+						pm8001_dev->attached_phy +
+						0x10);
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("SAS Address of IO Failure Drive:"
+				"%08x%08x", temp_sata_addr_hi,
+					temp_sata_addr_low));
+		} else {
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("SAS Address of IO Failure Drive:"
+				"%016llx", SAS_ADDR(t->dev->sas_addr)));
+		}
+	}
+	switch (status) {
+	case IO_SUCCESS:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+		if (param == 0) {
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAM_STAT_GOOD;
+			/* check if response is for SEND READ LOG */
+			if (pm8001_dev &&
+				(pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
+				/* set new bit for abort_all */
+				pm8001_dev->id |= NCQ_ABORT_ALL_FLAG;
+				/* clear bit for read log */
+				pm8001_dev->id = pm8001_dev->id & 0x7FFFFFFF;
+				pm8001_send_abort_all(pm8001_ha, pm8001_dev);
+				/* Free the tag */
+				pm8001_tag_free(pm8001_ha, tag);
+				sas_free_task(t);
+				return;
+			}
+		} else {
+			u8 len;
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAS_PROTO_RESPONSE;
+			ts->residual = param;
+			PM8001_IO_DBG(pm8001_ha,
+				pm8001_printk("SAS_PROTO_RESPONSE len = %d\n",
+				param));
+			sata_resp = &psataPayload->sata_resp[0];
+			resp = (struct ata_task_resp *)ts->buf;
+			if (t->ata_task.dma_xfer == 0 &&
+			t->data_dir == PCI_DMA_FROMDEVICE) {
+				len = sizeof(struct pio_setup_fis);
+				PM8001_IO_DBG(pm8001_ha,
+				pm8001_printk("PIO read len = %d\n", len));
+			} else if (t->ata_task.use_ncq) {
+				len = sizeof(struct set_dev_bits_fis);
+				PM8001_IO_DBG(pm8001_ha,
+					pm8001_printk("FPDMA len = %d\n", len));
+			} else {
+				len = sizeof(struct dev_to_host_fis);
+				PM8001_IO_DBG(pm8001_ha,
+				pm8001_printk("other len = %d\n", len));
+			}
+			if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
+				resp->frame_len = len;
+				memcpy(&resp->ending_fis[0], sata_resp, len);
+				ts->buf_valid_size = sizeof(*resp);
+			} else
+				PM8001_IO_DBG(pm8001_ha,
+					pm8001_printk("response to large\n"));
+		}
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_ABORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_ABORTED IOMB Tag\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_ABORTED_TASK;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+		/* following cases are to do cases */
+	case IO_UNDERFLOW:
+		/* SATA Completion with error */
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_UNDERFLOW param = %d\n", param));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_UNDERRUN;
+		ts->residual =  param;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_NO_DEVICE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_NO_DEVICE\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_PHY_DOWN;
+		break;
+	case IO_XFER_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_INTERRUPTED;
+		break;
+	case IO_XFER_ERROR_PHY_NOT_READY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
+			"_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_EPROTO;
+		break;
+	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+		break;
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+			ts->resp = SAS_TASK_UNDELIVERED;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+			ts->resp = SAS_TASK_UNDELIVERED;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+			"NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		break;
+	case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_STP_RESOURCES"
+			"_BUSY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY);
+			ts->resp = SAS_TASK_UNDELIVERED;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+		       pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		break;
+	case IO_XFER_ERROR_NAK_RECEIVED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_ERROR_DMA:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_DMA\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_ABORTED_TASK;
+		break;
+	case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_UNDERRUN;
+		break;
+	case IO_XFER_OPEN_RETRY_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_PORT_IN_RESET:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_PORT_IN_RESET\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	case IO_DS_NON_OPERATIONAL:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha, pm8001_dev,
+				    IO_DS_NON_OPERATIONAL);
+			ts->resp = SAS_TASK_UNDELIVERED;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_DS_IN_RECOVERY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("  IO_DS_IN_RECOVERY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	case IO_DS_IN_ERROR:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_IN_ERROR\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha, pm8001_dev,
+				    IO_DS_IN_ERROR);
+			ts->resp = SAS_TASK_UNDELIVERED;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+	default:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("Unknown status 0x%x\n", status));
+		/* not allowed case. Therefore, return failed status */
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	}
+	spin_lock_irqsave(&t->task_state_lock, flags);
+	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+	t->task_state_flags |= SAS_TASK_STATE_DONE;
+	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("task 0x%p done with io_status 0x%x"
+			" resp 0x%x stat 0x%x but aborted by upper layer!\n",
+			t, status, ts->resp, ts->stat));
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+	} else {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+	}
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+	struct sas_task *t;
+	struct task_status_struct *ts;
+	struct pm8001_ccb_info *ccb;
+	struct pm8001_device *pm8001_dev;
+	struct sata_event_resp *psataPayload =
+		(struct sata_event_resp *)(piomb + 4);
+	u32 event = le32_to_cpu(psataPayload->event);
+	u32 tag = le32_to_cpu(psataPayload->tag);
+	u32 port_id = le32_to_cpu(psataPayload->port_id);
+	u32 dev_id = le32_to_cpu(psataPayload->device_id);
+	unsigned long flags;
+
+	ccb = &pm8001_ha->ccb_info[tag];
+
+	if (ccb) {
+		t = ccb->task;
+		pm8001_dev = ccb->device;
+	} else {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("No CCB !!!. returning\n"));
+	}
+	if (event)
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("SATA EVENT 0x%x\n", event));
+
+	/* Check if this is NCQ error */
+	if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
+		/* find device using device id */
+		pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
+		/* send read log extension */
+		if (pm8001_dev)
+			pm8001_send_read_log(pm8001_ha, pm8001_dev);
+		return;
+	}
+
+	ccb = &pm8001_ha->ccb_info[tag];
+	t = ccb->task;
+	pm8001_dev = ccb->device;
+	if (event)
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("sata IO status 0x%x\n", event));
+	if (unlikely(!t || !t->lldd_task || !t->dev))
+		return;
+	ts = &t->task_status;
+	PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+		"port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n",
+		port_id, dev_id, tag, event));
+	switch (event) {
+	case IO_OVERFLOW:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		ts->residual = 0;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_XFER_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_INTERRUPTED;
+		break;
+	case IO_XFER_ERROR_PHY_NOT_READY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
+			"_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_EPROTO;
+		break;
+	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+		break;
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+		break;
+	case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+			"NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		break;
+	case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+		       pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		break;
+	case IO_XFER_ERROR_NAK_RECEIVED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_ERROR_PEER_ABORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_UNDERRUN;
+		break;
+	case IO_XFER_OPEN_RETRY_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_ERROR_UNEXPECTED_PHASE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+		PM8001_IO_DBG(pm8001_ha,
+		       pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_ERROR_OFFSET_MISMATCH:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_CMD_FRAME_ISSUED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+		break;
+	case IO_XFER_PIO_SETUP_ERROR:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	default:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("Unknown status 0x%x\n", event));
+		/* not allowed case. Therefore, return failed status */
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	}
+	spin_lock_irqsave(&t->task_state_lock, flags);
+	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+	t->task_state_flags |= SAS_TASK_STATE_DONE;
+	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("task 0x%p done with io_status 0x%x"
+			" resp 0x%x stat 0x%x but aborted by upper layer!\n",
+			t, event, ts->resp, ts->stat));
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+	} else {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+	}
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	u32 param;
+	struct sas_task *t;
+	struct pm8001_ccb_info *ccb;
+	unsigned long flags;
+	u32 status;
+	u32 tag;
+	struct smp_completion_resp *psmpPayload;
+	struct task_status_struct *ts;
+	struct pm8001_device *pm8001_dev;
+
+	psmpPayload = (struct smp_completion_resp *)(piomb + 4);
+	status = le32_to_cpu(psmpPayload->status);
+	tag = le32_to_cpu(psmpPayload->tag);
+
+	ccb = &pm8001_ha->ccb_info[tag];
+	param = le32_to_cpu(psmpPayload->param);
+	t = ccb->task;
+	ts = &t->task_status;
+	pm8001_dev = ccb->device;
+	if (status)
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("smp IO status 0x%x\n", status));
+	if (unlikely(!t || !t->lldd_task || !t->dev))
+		return;
+
+	switch (status) {
+	case IO_SUCCESS:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAM_STAT_GOOD;
+	if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_ABORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_ABORTED IOMB\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_ABORTED_TASK;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_OVERFLOW:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		ts->residual = 0;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_NO_DEVICE:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_PHY_DOWN;
+		break;
+	case IO_ERROR_HW_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_ERROR_HW_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAM_STAT_BUSY;
+		break;
+	case IO_XFER_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAM_STAT_BUSY;
+		break;
+	case IO_XFER_ERROR_PHY_NOT_READY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAM_STAT_BUSY;
+		break;
+	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+		break;
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+		break;
+	case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+		break;
+	case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+			"NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		break;
+	case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+		       pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		break;
+	case IO_XFER_ERROR_RX_FRAME:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_RX_FRAME\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	case IO_XFER_OPEN_RETRY_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_ERROR_INTERNAL_SMP_RESOURCE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_QUEUE_FULL;
+		break;
+	case IO_PORT_IN_RESET:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_PORT_IN_RESET\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_DS_NON_OPERATIONAL:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	case IO_DS_IN_RECOVERY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_IN_RECOVERY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	default:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("Unknown status 0x%x\n", status));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		/* not allowed case. Therefore, return failed status */
+		break;
+	}
+	spin_lock_irqsave(&t->task_state_lock, flags);
+	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+	t->task_state_flags |= SAS_TASK_STATE_DONE;
+	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
+			" io_status 0x%x resp 0x%x "
+			"stat 0x%x but aborted by upper layer!\n",
+			t, status, ts->resp, ts->stat));
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+	} else {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+		mb();/* in order to force CPU ordering */
+		t->task_done(t);
+	}
+}
+
+void pm8001_mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha,
+		void *piomb)
+{
+	struct set_dev_state_resp *pPayload =
+		(struct set_dev_state_resp *)(piomb + 4);
+	u32 tag = le32_to_cpu(pPayload->tag);
+	struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+	struct pm8001_device *pm8001_dev = ccb->device;
+	u32 status = le32_to_cpu(pPayload->status);
+	u32 device_id = le32_to_cpu(pPayload->device_id);
+	u8 pds = le32_to_cpu(pPayload->pds_nds) & PDS_BITS;
+	u8 nds = le32_to_cpu(pPayload->pds_nds) & NDS_BITS;
+	PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set device id = 0x%x state "
+		"from 0x%x to 0x%x status = 0x%x!\n",
+		device_id, pds, nds, status));
+	complete(pm8001_dev->setds_completion);
+	ccb->task = NULL;
+	ccb->ccb_tag = 0xFFFFFFFF;
+	pm8001_tag_free(pm8001_ha, tag);
+}
+
+void pm8001_mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct get_nvm_data_resp *pPayload =
+		(struct get_nvm_data_resp *)(piomb + 4);
+	u32 tag = le32_to_cpu(pPayload->tag);
+	struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+	u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
+	complete(pm8001_ha->nvmd_completion);
+	PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set nvm data complete!\n"));
+	if ((dlen_status & NVMD_STAT) != 0) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Set nvm data error!\n"));
+		return;
+	}
+	ccb->task = NULL;
+	ccb->ccb_tag = 0xFFFFFFFF;
+	pm8001_tag_free(pm8001_ha, tag);
+}
+
+void
+pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct fw_control_ex    *fw_control_context;
+	struct get_nvm_data_resp *pPayload =
+		(struct get_nvm_data_resp *)(piomb + 4);
+	u32 tag = le32_to_cpu(pPayload->tag);
+	struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+	u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
+	u32 ir_tds_bn_dps_das_nvm =
+		le32_to_cpu(pPayload->ir_tda_bn_dps_das_nvm);
+	void *virt_addr = pm8001_ha->memoryMap.region[NVMD].virt_ptr;
+	fw_control_context = ccb->fw_control_context;
+
+	PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Get nvm data complete!\n"));
+	if ((dlen_status & NVMD_STAT) != 0) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Get nvm data error!\n"));
+		complete(pm8001_ha->nvmd_completion);
+		return;
+	}
+
+	if (ir_tds_bn_dps_das_nvm & IPMode) {
+		/* indirect mode - IR bit set */
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("Get NVMD success, IR=1\n"));
+		if ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == TWI_DEVICE) {
+			if (ir_tds_bn_dps_das_nvm == 0x80a80200) {
+				memcpy(pm8001_ha->sas_addr,
+				      ((u8 *)virt_addr + 4),
+				       SAS_ADDR_SIZE);
+				PM8001_MSG_DBG(pm8001_ha,
+					pm8001_printk("Get SAS address"
+					" from VPD successfully!\n"));
+			}
+		} else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == C_SEEPROM)
+			|| ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == VPD_FLASH) ||
+			((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == EXPAN_ROM)) {
+				;
+		} else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == AAP1_RDUMP)
+			|| ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == IOP_RDUMP)) {
+			;
+		} else {
+			/* Should not be happened*/
+			PM8001_MSG_DBG(pm8001_ha,
+				pm8001_printk("(IR=1)Wrong Device type 0x%x\n",
+				ir_tds_bn_dps_das_nvm));
+		}
+	} else /* direct mode */{
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("Get NVMD success, IR=0, dataLen=%d\n",
+			(dlen_status & NVMD_LEN) >> 24));
+	}
+	/* Though fw_control_context is freed below, usrAddr still needs
+	 * to be updated as this holds the response to the request function
+	 */
+	memcpy(fw_control_context->usrAddr,
+		pm8001_ha->memoryMap.region[NVMD].virt_ptr,
+		fw_control_context->len);
+	kfree(ccb->fw_control_context);
+	ccb->task = NULL;
+	ccb->ccb_tag = 0xFFFFFFFF;
+	pm8001_tag_free(pm8001_ha, tag);
+	complete(pm8001_ha->nvmd_completion);
+}
+
+int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct local_phy_ctl_resp *pPayload =
+		(struct local_phy_ctl_resp *)(piomb + 4);
+	u32 status = le32_to_cpu(pPayload->status);
+	u32 phy_id = le32_to_cpu(pPayload->phyop_phyid) & ID_BITS;
+	u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS;
+	if (status != 0) {
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("%x phy execute %x phy op failed!\n",
+			phy_id, phy_op));
+	} else
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("%x phy execute %x phy op success!\n",
+			phy_id, phy_op));
+	return 0;
+}
+
+/**
+ * pm8001_bytes_dmaed - one of the interface function communication with libsas
+ * @pm8001_ha: our hba card information
+ * @i: which phy that received the event.
+ *
+ * when HBA driver received the identify done event or initiate FIS received
+ * event(for SATA), it will invoke this function to notify the sas layer that
+ * the sas toplogy has formed, please discover the the whole sas domain,
+ * while receive a broadcast(change) primitive just tell the sas
+ * layer to discover the changed domain rather than the whole domain.
+ */
+void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
+{
+	struct pm8001_phy *phy = &pm8001_ha->phy[i];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+	struct sas_ha_struct *sas_ha;
+	if (!phy->phy_attached)
+		return;
+
+	sas_ha = pm8001_ha->sas;
+	if (sas_phy->phy) {
+		struct sas_phy *sphy = sas_phy->phy;
+		sphy->negotiated_linkrate = sas_phy->linkrate;
+		sphy->minimum_linkrate = phy->minimum_linkrate;
+		sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+		sphy->maximum_linkrate = phy->maximum_linkrate;
+		sphy->maximum_linkrate_hw = phy->maximum_linkrate;
+	}
+
+	if (phy->phy_type & PORT_TYPE_SAS) {
+		struct sas_identify_frame *id;
+		id = (struct sas_identify_frame *)phy->frame_rcvd;
+		id->dev_type = phy->identify.device_type;
+		id->initiator_bits = SAS_PROTOCOL_ALL;
+		id->target_bits = phy->identify.target_port_protocols;
+	} else if (phy->phy_type & PORT_TYPE_SATA) {
+		/*Nothing*/
+	}
+	PM8001_MSG_DBG(pm8001_ha, pm8001_printk("phy %d byte dmaded.\n", i));
+
+	sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
+	pm8001_ha->sas->notify_port_event(sas_phy, PORTE_BYTES_DMAED);
+}
+
+/* Get the link rate speed  */
+void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
+{
+	struct sas_phy *sas_phy = phy->sas_phy.phy;
+
+	switch (link_rate) {
+	case PHY_SPEED_60:
+		phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
+		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+		break;
+	case PHY_SPEED_30:
+		phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS;
+		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+		break;
+	case PHY_SPEED_15:
+		phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS;
+		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+		break;
+	}
+	sas_phy->negotiated_linkrate = phy->sas_phy.linkrate;
+	sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_6_0_GBPS;
+	sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+	sas_phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
+	sas_phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+}
+
+/**
+ * asd_get_attached_sas_addr -- extract/generate attached SAS address
+ * @phy: pointer to asd_phy
+ * @sas_addr: pointer to buffer where the SAS address is to be written
+ *
+ * This function extracts the SAS address from an IDENTIFY frame
+ * received.  If OOB is SATA, then a SAS address is generated from the
+ * HA tables.
+ *
+ * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
+ * buffer.
+ */
+void pm8001_get_attached_sas_addr(struct pm8001_phy *phy,
+	u8 *sas_addr)
+{
+	if (phy->sas_phy.frame_rcvd[0] == 0x34
+		&& phy->sas_phy.oob_mode == SATA_OOB_MODE) {
+		struct pm8001_hba_info *pm8001_ha = phy->sas_phy.ha->lldd_ha;
+		/* FIS device-to-host */
+		u64 addr = be64_to_cpu(*(__be64 *)pm8001_ha->sas_addr);
+		addr += phy->sas_phy.id;
+		*(__be64 *)sas_addr = cpu_to_be64(addr);
+	} else {
+		struct sas_identify_frame *idframe =
+			(void *) phy->sas_phy.frame_rcvd;
+		memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE);
+	}
+}
+
+/**
+ * pm8001_hw_event_ack_req- For PM8001,some events need to acknowage to FW.
+ * @pm8001_ha: our hba card information
+ * @Qnum: the outbound queue message number.
+ * @SEA: source of event to ack
+ * @port_id: port id.
+ * @phyId: phy id.
+ * @param0: parameter 0.
+ * @param1: parameter 1.
+ */
+static void pm8001_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
+	u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0, u32 param1)
+{
+	struct hw_event_ack_req	 payload;
+	u32 opc = OPC_INB_SAS_HW_EVENT_ACK;
+
+	struct inbound_queue_table *circularQ;
+
+	memset((u8 *)&payload, 0, sizeof(payload));
+	circularQ = &pm8001_ha->inbnd_q_tbl[Qnum];
+	payload.tag = cpu_to_le32(1);
+	payload.sea_phyid_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) |
+		((phyId & 0x0F) << 4) | (port_id & 0x0F));
+	payload.param0 = cpu_to_le32(param0);
+	payload.param1 = cpu_to_le32(param1);
+	pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+}
+
+static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+	u32 phyId, u32 phy_op);
+
+/**
+ * hw_event_sas_phy_up -FW tells me a SAS phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct hw_event_resp *pPayload =
+		(struct hw_event_resp *)(piomb + 4);
+	u32 lr_evt_status_phyid_portid =
+		le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+	u8 link_rate =
+		(u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
+	u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+	u8 phy_id =
+		(u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+	u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
+	u8 portstate = (u8)(npip_portstate & 0x0000000F);
+	struct pm8001_port *port = &pm8001_ha->port[port_id];
+	struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+	unsigned long flags;
+	u8 deviceType = pPayload->sas_identify.dev_type;
+	port->port_state =  portstate;
+	phy->phy_state = PHY_STATE_LINK_UP_SPC;
+	PM8001_MSG_DBG(pm8001_ha,
+		pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n",
+		port_id, phy_id));
+
+	switch (deviceType) {
+	case SAS_PHY_UNUSED:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("device type no device.\n"));
+		break;
+	case SAS_END_DEVICE:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
+		pm8001_chip_phy_ctl_req(pm8001_ha, phy_id,
+			PHY_NOTIFY_ENABLE_SPINUP);
+		port->port_attached = 1;
+		pm8001_get_lrate_mode(phy, link_rate);
+		break;
+	case SAS_EDGE_EXPANDER_DEVICE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("expander device.\n"));
+		port->port_attached = 1;
+		pm8001_get_lrate_mode(phy, link_rate);
+		break;
+	case SAS_FANOUT_EXPANDER_DEVICE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("fanout expander device.\n"));
+		port->port_attached = 1;
+		pm8001_get_lrate_mode(phy, link_rate);
+		break;
+	default:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("unknown device type(%x)\n", deviceType));
+		break;
+	}
+	phy->phy_type |= PORT_TYPE_SAS;
+	phy->identify.device_type = deviceType;
+	phy->phy_attached = 1;
+	if (phy->identify.device_type == SAS_END_DEVICE)
+		phy->identify.target_port_protocols = SAS_PROTOCOL_SSP;
+	else if (phy->identify.device_type != SAS_PHY_UNUSED)
+		phy->identify.target_port_protocols = SAS_PROTOCOL_SMP;
+	phy->sas_phy.oob_mode = SAS_OOB_MODE;
+	sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+	spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+	memcpy(phy->frame_rcvd, &pPayload->sas_identify,
+		sizeof(struct sas_identify_frame)-4);
+	phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4;
+	pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+	if (pm8001_ha->flags == PM8001F_RUN_TIME)
+		mdelay(200);/*delay a moment to wait disk to spinup*/
+	pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_sata_phy_up -FW tells me a SATA phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct hw_event_resp *pPayload =
+		(struct hw_event_resp *)(piomb + 4);
+	u32 lr_evt_status_phyid_portid =
+		le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+	u8 link_rate =
+		(u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
+	u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+	u8 phy_id =
+		(u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+	u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
+	u8 portstate = (u8)(npip_portstate & 0x0000000F);
+	struct pm8001_port *port = &pm8001_ha->port[port_id];
+	struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+	unsigned long flags;
+	PM8001_MSG_DBG(pm8001_ha,
+		pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d,"
+		" phy id = %d\n", port_id, phy_id));
+	port->port_state =  portstate;
+	phy->phy_state = PHY_STATE_LINK_UP_SPC;
+	port->port_attached = 1;
+	pm8001_get_lrate_mode(phy, link_rate);
+	phy->phy_type |= PORT_TYPE_SATA;
+	phy->phy_attached = 1;
+	phy->sas_phy.oob_mode = SATA_OOB_MODE;
+	sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+	spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+	memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4),
+		sizeof(struct dev_to_host_fis));
+	phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
+	phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
+	phy->identify.device_type = SAS_SATA_DEV;
+	pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+	pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_phy_down -we should notify the libsas the phy is down.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct hw_event_resp *pPayload =
+		(struct hw_event_resp *)(piomb + 4);
+	u32 lr_evt_status_phyid_portid =
+		le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+	u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+	u8 phy_id =
+		(u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+	u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
+	u8 portstate = (u8)(npip_portstate & 0x0000000F);
+	struct pm8001_port *port = &pm8001_ha->port[port_id];
+	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+	port->port_state =  portstate;
+	phy->phy_type = 0;
+	phy->identify.device_type = 0;
+	phy->phy_attached = 0;
+	memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE);
+	switch (portstate) {
+	case PORT_VALID:
+		break;
+	case PORT_INVALID:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" PortInvalid portID %d\n", port_id));
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" Last phy Down and port invalid\n"));
+		port->port_attached = 0;
+		pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+			port_id, phy_id, 0, 0);
+		break;
+	case PORT_IN_RESET:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" Port In Reset portID %d\n", port_id));
+		break;
+	case PORT_NOT_ESTABLISHED:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
+		port->port_attached = 0;
+		break;
+	case PORT_LOSTCOMM:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" Last phy Down and port invalid\n"));
+		port->port_attached = 0;
+		pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+			port_id, phy_id, 0, 0);
+		break;
+	default:
+		port->port_attached = 0;
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" phy Down and(default) = %x\n",
+			portstate));
+		break;
+
+	}
+}
+
+/**
+ * pm8001_mpi_reg_resp -process register device ID response.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ *
+ * when sas layer find a device it will notify LLDD, then the driver register
+ * the domain device to FW, this event is the return device ID which the FW
+ * has assigned, from now,inter-communication with FW is no longer using the
+ * SAS address, use device ID which FW assigned.
+ */
+int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	u32 status;
+	u32 device_id;
+	u32 htag;
+	struct pm8001_ccb_info *ccb;
+	struct pm8001_device *pm8001_dev;
+	struct dev_reg_resp *registerRespPayload =
+		(struct dev_reg_resp *)(piomb + 4);
+
+	htag = le32_to_cpu(registerRespPayload->tag);
+	ccb = &pm8001_ha->ccb_info[htag];
+	pm8001_dev = ccb->device;
+	status = le32_to_cpu(registerRespPayload->status);
+	device_id = le32_to_cpu(registerRespPayload->device_id);
+	PM8001_MSG_DBG(pm8001_ha,
+		pm8001_printk(" register device is status = %d\n", status));
+	switch (status) {
+	case DEVREG_SUCCESS:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk("DEVREG_SUCCESS\n"));
+		pm8001_dev->device_id = device_id;
+		break;
+	case DEVREG_FAILURE_OUT_OF_RESOURCE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("DEVREG_FAILURE_OUT_OF_RESOURCE\n"));
+		break;
+	case DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED:
+		PM8001_MSG_DBG(pm8001_ha,
+		   pm8001_printk("DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED\n"));
+		break;
+	case DEVREG_FAILURE_INVALID_PHY_ID:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("DEVREG_FAILURE_INVALID_PHY_ID\n"));
+		break;
+	case DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED:
+		PM8001_MSG_DBG(pm8001_ha,
+		   pm8001_printk("DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED\n"));
+		break;
+	case DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE\n"));
+		break;
+	case DEVREG_FAILURE_PORT_NOT_VALID_STATE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("DEVREG_FAILURE_PORT_NOT_VALID_STATE\n"));
+		break;
+	case DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID:
+		PM8001_MSG_DBG(pm8001_ha,
+		       pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID\n"));
+		break;
+	default:
+		PM8001_MSG_DBG(pm8001_ha,
+		 pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_UNSORPORTED\n"));
+		break;
+	}
+	complete(pm8001_dev->dcompletion);
+	ccb->task = NULL;
+	ccb->ccb_tag = 0xFFFFFFFF;
+	pm8001_tag_free(pm8001_ha, htag);
+	return 0;
+}
+
+int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	u32 status;
+	u32 device_id;
+	struct dev_reg_resp *registerRespPayload =
+		(struct dev_reg_resp *)(piomb + 4);
+
+	status = le32_to_cpu(registerRespPayload->status);
+	device_id = le32_to_cpu(registerRespPayload->device_id);
+	if (status != 0)
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" deregister device failed ,status = %x"
+			", device_id = %x\n", status, device_id));
+	return 0;
+}
+
+/**
+ * fw_flash_update_resp - Response from FW for flash update command.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha,
+		void *piomb)
+{
+	u32 status;
+	struct fw_flash_Update_resp *ppayload =
+		(struct fw_flash_Update_resp *)(piomb + 4);
+	u32 tag = le32_to_cpu(ppayload->tag);
+	struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+	status = le32_to_cpu(ppayload->status);
+	switch (status) {
+	case FLASH_UPDATE_COMPLETE_PENDING_REBOOT:
+		PM8001_MSG_DBG(pm8001_ha,
+		pm8001_printk(": FLASH_UPDATE_COMPLETE_PENDING_REBOOT\n"));
+		break;
+	case FLASH_UPDATE_IN_PROGRESS:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(": FLASH_UPDATE_IN_PROGRESS\n"));
+		break;
+	case FLASH_UPDATE_HDR_ERR:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(": FLASH_UPDATE_HDR_ERR\n"));
+		break;
+	case FLASH_UPDATE_OFFSET_ERR:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(": FLASH_UPDATE_OFFSET_ERR\n"));
+		break;
+	case FLASH_UPDATE_CRC_ERR:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(": FLASH_UPDATE_CRC_ERR\n"));
+		break;
+	case FLASH_UPDATE_LENGTH_ERR:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(": FLASH_UPDATE_LENGTH_ERR\n"));
+		break;
+	case FLASH_UPDATE_HW_ERR:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(": FLASH_UPDATE_HW_ERR\n"));
+		break;
+	case FLASH_UPDATE_DNLD_NOT_SUPPORTED:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(": FLASH_UPDATE_DNLD_NOT_SUPPORTED\n"));
+		break;
+	case FLASH_UPDATE_DISABLED:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(": FLASH_UPDATE_DISABLED\n"));
+		break;
+	default:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("No matched status = %d\n", status));
+		break;
+	}
+	kfree(ccb->fw_control_context);
+	ccb->task = NULL;
+	ccb->ccb_tag = 0xFFFFFFFF;
+	pm8001_tag_free(pm8001_ha, tag);
+	complete(pm8001_ha->nvmd_completion);
+	return 0;
+}
+
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+	u32 status;
+	int i;
+	struct general_event_resp *pPayload =
+		(struct general_event_resp *)(piomb + 4);
+	status = le32_to_cpu(pPayload->status);
+	PM8001_MSG_DBG(pm8001_ha,
+		pm8001_printk(" status = 0x%x\n", status));
+	for (i = 0; i < GENERAL_EVENT_PAYLOAD; i++)
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("inb_IOMB_payload[0x%x] 0x%x,\n", i,
+			pPayload->inb_IOMB_payload[i]));
+	return 0;
+}
+
+int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct sas_task *t;
+	struct pm8001_ccb_info *ccb;
+	unsigned long flags;
+	u32 status ;
+	u32 tag, scp;
+	struct task_status_struct *ts;
+	struct pm8001_device *pm8001_dev;
+
+	struct task_abort_resp *pPayload =
+		(struct task_abort_resp *)(piomb + 4);
+
+	status = le32_to_cpu(pPayload->status);
+	tag = le32_to_cpu(pPayload->tag);
+	if (!tag) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk(" TAG NULL. RETURNING !!!"));
+		return -1;
+	}
+
+	scp = le32_to_cpu(pPayload->scp);
+	ccb = &pm8001_ha->ccb_info[tag];
+	t = ccb->task;
+	pm8001_dev = ccb->device; /* retrieve device */
+
+	if (!t)	{
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk(" TASK NULL. RETURNING !!!"));
+		return -1;
+	}
+	ts = &t->task_status;
+	if (status != 0)
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("task abort failed status 0x%x ,"
+			"tag = 0x%x, scp= 0x%x\n", status, tag, scp));
+	switch (status) {
+	case IO_SUCCESS:
+		PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAM_STAT_GOOD;
+		break;
+	case IO_NOT_VALID:
+		PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_NOT_VALID\n"));
+		ts->resp = TMF_RESP_FUNC_FAILED;
+		break;
+	}
+	spin_lock_irqsave(&t->task_state_lock, flags);
+	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+	t->task_state_flags |= SAS_TASK_STATE_DONE;
+	spin_unlock_irqrestore(&t->task_state_lock, flags);
+	pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+	mb();
+
+	if (pm8001_dev->id & NCQ_ABORT_ALL_FLAG) {
+		pm8001_tag_free(pm8001_ha, tag);
+		sas_free_task(t);
+		/* clear the flag */
+		pm8001_dev->id &= 0xBFFFFFFF;
+	} else
+		t->task_done(t);
+
+	return 0;
+}
+
+/**
+ * mpi_hw_event -The hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
+{
+	unsigned long flags;
+	struct hw_event_resp *pPayload =
+		(struct hw_event_resp *)(piomb + 4);
+	u32 lr_evt_status_phyid_portid =
+		le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+	u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+	u8 phy_id =
+		(u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+	u16 eventType =
+		(u16)((lr_evt_status_phyid_portid & 0x00FFFF00) >> 8);
+	u8 status =
+		(u8)((lr_evt_status_phyid_portid & 0x0F000000) >> 24);
+	struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+	struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+	PM8001_MSG_DBG(pm8001_ha,
+		pm8001_printk("outbound queue HW event & event type : "));
+	switch (eventType) {
+	case HW_EVENT_PHY_START_STATUS:
+		PM8001_MSG_DBG(pm8001_ha,
+		pm8001_printk("HW_EVENT_PHY_START_STATUS"
+			" status = %x\n", status));
+		if (status == 0) {
+			phy->phy_state = 1;
+			if (pm8001_ha->flags == PM8001F_RUN_TIME)
+				complete(phy->enable_completion);
+		}
+		break;
+	case HW_EVENT_SAS_PHY_UP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PHY_START_STATUS\n"));
+		hw_event_sas_phy_up(pm8001_ha, piomb);
+		break;
+	case HW_EVENT_SATA_PHY_UP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_SATA_PHY_UP\n"));
+		hw_event_sata_phy_up(pm8001_ha, piomb);
+		break;
+	case HW_EVENT_PHY_STOP_STATUS:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PHY_STOP_STATUS "
+			"status = %x\n", status));
+		if (status == 0)
+			phy->phy_state = 0;
+		break;
+	case HW_EVENT_SATA_SPINUP_HOLD:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n"));
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+		break;
+	case HW_EVENT_PHY_DOWN:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PHY_DOWN\n"));
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+		phy->phy_attached = 0;
+		phy->phy_state = 0;
+		hw_event_phy_down(pm8001_ha, piomb);
+		break;
+	case HW_EVENT_PORT_INVALID:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PORT_INVALID\n"));
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	/* the broadcast change primitive received, tell the LIBSAS this event
+	to revalidate the sas domain*/
+	case HW_EVENT_BROADCAST_CHANGE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n"));
+		pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
+			port_id, phy_id, 1, 0);
+		spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+		sas_phy->sas_prim = HW_EVENT_BROADCAST_CHANGE;
+		spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+		sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+		break;
+	case HW_EVENT_PHY_ERROR:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PHY_ERROR\n"));
+		sas_phy_disconnected(&phy->sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+		break;
+	case HW_EVENT_BROADCAST_EXP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_BROADCAST_EXP\n"));
+		spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+		sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
+		spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+		sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+		break;
+	case HW_EVENT_LINK_ERR_INVALID_DWORD:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
+		pm8001_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"));
+		pm8001_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_LINK_ERR_DISPARITY_ERROR,
+			port_id, phy_id, 0, 0);
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_LINK_ERR_CODE_VIOLATION:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n"));
+		pm8001_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_LINK_ERR_CODE_VIOLATION,
+			port_id, phy_id, 0, 0);
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
+		PM8001_MSG_DBG(pm8001_ha,
+		      pm8001_printk("HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"));
+		pm8001_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
+			port_id, phy_id, 0, 0);
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_MALFUNCTION:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_MALFUNCTION\n"));
+		break;
+	case HW_EVENT_BROADCAST_SES:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_BROADCAST_SES\n"));
+		spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+		sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
+		spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+		sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+		break;
+	case HW_EVENT_INBOUND_CRC_ERROR:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n"));
+		pm8001_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_INBOUND_CRC_ERROR,
+			port_id, phy_id, 0, 0);
+		break;
+	case HW_EVENT_HARD_RESET_RECEIVED:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n"));
+		sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
+		break;
+	case HW_EVENT_ID_FRAME_TIMEOUT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n"));
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n"));
+		pm8001_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
+			port_id, phy_id, 0, 0);
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_PORT_RESET_TIMER_TMO:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n"));
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"));
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_PORT_RECOVER:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
+		break;
+	case HW_EVENT_PORT_RESET_COMPLETE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n"));
+		break;
+	case EVENT_BROADCAST_ASYNCH_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n"));
+		break;
+	default:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("Unknown event type = %x\n", eventType));
+		break;
+	}
+	return 0;
+}
+
+/**
+ * process_one_iomb - process one outbound Queue memory block
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	__le32 pHeader = *(__le32 *)piomb;
+	u8 opc = (u8)((le32_to_cpu(pHeader)) & 0xFFF);
+
+	PM8001_MSG_DBG(pm8001_ha, pm8001_printk("process_one_iomb:"));
+
+	switch (opc) {
+	case OPC_OUB_ECHO:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n"));
+		break;
+	case OPC_OUB_HW_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_HW_EVENT\n"));
+		mpi_hw_event(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SSP_COMP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SSP_COMP\n"));
+		mpi_ssp_completion(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SMP_COMP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SMP_COMP\n"));
+		mpi_smp_completion(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_LOCAL_PHY_CNTRL:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
+		pm8001_mpi_local_phy_ctl(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_DEV_REGIST:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_DEV_REGIST\n"));
+		pm8001_mpi_reg_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_DEREG_DEV:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("unregister the device\n"));
+		pm8001_mpi_dereg_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_GET_DEV_HANDLE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n"));
+		break;
+	case OPC_OUB_SATA_COMP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SATA_COMP\n"));
+		mpi_sata_completion(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SATA_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SATA_EVENT\n"));
+		mpi_sata_event(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SSP_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SSP_EVENT\n"));
+		mpi_ssp_event(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_DEV_HANDLE_ARRIV:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n"));
+		/*This is for target*/
+		break;
+	case OPC_OUB_SSP_RECV_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n"));
+		/*This is for target*/
+		break;
+	case OPC_OUB_DEV_INFO:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_DEV_INFO\n"));
+		break;
+	case OPC_OUB_FW_FLASH_UPDATE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
+		pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_GPIO_RESPONSE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GPIO_RESPONSE\n"));
+		break;
+	case OPC_OUB_GPIO_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GPIO_EVENT\n"));
+		break;
+	case OPC_OUB_GENERAL_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
+		pm8001_mpi_general_event(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SSP_ABORT_RSP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
+		pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SATA_ABORT_RSP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
+		pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SAS_DIAG_MODE_START_END:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n"));
+		break;
+	case OPC_OUB_SAS_DIAG_EXECUTE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n"));
+		break;
+	case OPC_OUB_GET_TIME_STAMP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GET_TIME_STAMP\n"));
+		break;
+	case OPC_OUB_SAS_HW_EVENT_ACK:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n"));
+		break;
+	case OPC_OUB_PORT_CONTROL:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_PORT_CONTROL\n"));
+		break;
+	case OPC_OUB_SMP_ABORT_RSP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
+		pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_GET_NVMD_DATA:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
+		pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SET_NVMD_DATA:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
+		pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_DEVICE_HANDLE_REMOVAL:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n"));
+		break;
+	case OPC_OUB_SET_DEVICE_STATE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
+		pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_GET_DEVICE_STATE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n"));
+		break;
+	case OPC_OUB_SET_DEV_INFO:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SET_DEV_INFO\n"));
+		break;
+	case OPC_OUB_SAS_RE_INITIALIZE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SAS_RE_INITIALIZE\n"));
+		break;
+	default:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("Unknown outbound Queue IOMB OPC = %x\n",
+			opc));
+		break;
+	}
+}
+
+static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+	struct outbound_queue_table *circularQ;
+	void *pMsg1 = NULL;
+	u8 uninitialized_var(bc);
+	u32 ret = MPI_IO_STATUS_FAIL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pm8001_ha->lock, flags);
+	circularQ = &pm8001_ha->outbnd_q_tbl[vec];
+	do {
+		ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
+		if (MPI_IO_STATUS_SUCCESS == ret) {
+			/* process the outbound message */
+			process_one_iomb(pm8001_ha, (void *)(pMsg1 - 4));
+			/* free the message from the outbound circular buffer */
+			pm8001_mpi_msg_free_set(pm8001_ha, pMsg1,
+							circularQ, bc);
+		}
+		if (MPI_IO_STATUS_BUSY == ret) {
+			/* Update the producer index from SPC */
+			circularQ->producer_index =
+				cpu_to_le32(pm8001_read_32(circularQ->pi_virt));
+			if (le32_to_cpu(circularQ->producer_index) ==
+				circularQ->consumer_idx)
+				/* OQ is empty */
+				break;
+		}
+	} while (1);
+	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+	return ret;
+}
+
+/* PCI_DMA_... to our direction translation. */
+static const u8 data_dir_flags[] = {
+	[PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT,/* UNSPECIFIED */
+	[PCI_DMA_TODEVICE]	= DATA_DIR_OUT,/* OUTBOUND */
+	[PCI_DMA_FROMDEVICE]	= DATA_DIR_IN,/* INBOUND */
+	[PCI_DMA_NONE]		= DATA_DIR_NONE,/* NO TRANSFER */
+};
+void
+pm8001_chip_make_sg(struct scatterlist *scatter, int nr, void *prd)
+{
+	int i;
+	struct scatterlist *sg;
+	struct pm8001_prd *buf_prd = prd;
+
+	for_each_sg(scatter, sg, nr, i) {
+		buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+		buf_prd->im_len.len = cpu_to_le32(sg_dma_len(sg));
+		buf_prd->im_len.e = 0;
+		buf_prd++;
+	}
+}
+
+static void build_smp_cmd(u32 deviceID, __le32 hTag, struct smp_req *psmp_cmd)
+{
+	psmp_cmd->tag = hTag;
+	psmp_cmd->device_id = cpu_to_le32(deviceID);
+	psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1));
+}
+
+/**
+ * pm8001_chip_smp_req - send a SMP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm8001_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_ccb_info *ccb)
+{
+	int elem, rc;
+	struct sas_task *task = ccb->task;
+	struct domain_device *dev = task->dev;
+	struct pm8001_device *pm8001_dev = dev->lldd_dev;
+	struct scatterlist *sg_req, *sg_resp;
+	u32 req_len, resp_len;
+	struct smp_req smp_cmd;
+	u32 opc;
+	struct inbound_queue_table *circularQ;
+
+	memset(&smp_cmd, 0, sizeof(smp_cmd));
+	/*
+	 * DMA-map SMP request, response buffers
+	 */
+	sg_req = &task->smp_task.smp_req;
+	elem = dma_map_sg(pm8001_ha->dev, sg_req, 1, PCI_DMA_TODEVICE);
+	if (!elem)
+		return -ENOMEM;
+	req_len = sg_dma_len(sg_req);
+
+	sg_resp = &task->smp_task.smp_resp;
+	elem = dma_map_sg(pm8001_ha->dev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+	if (!elem) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+	resp_len = sg_dma_len(sg_resp);
+	/* must be in dwords */
+	if ((req_len & 0x3) || (resp_len & 0x3)) {
+		rc = -EINVAL;
+		goto err_out_2;
+	}
+
+	opc = OPC_INB_SMP_REQUEST;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	smp_cmd.tag = cpu_to_le32(ccb->ccb_tag);
+	smp_cmd.long_smp_req.long_req_addr =
+		cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
+	smp_cmd.long_smp_req.long_req_size =
+		cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
+	smp_cmd.long_smp_req.long_resp_addr =
+		cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_resp));
+	smp_cmd.long_smp_req.long_resp_size =
+		cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
+	build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag, &smp_cmd);
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
+					(u32 *)&smp_cmd, 0);
+	if (rc)
+		goto err_out_2;
+
+	return 0;
+
+err_out_2:
+	dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_resp, 1,
+			PCI_DMA_FROMDEVICE);
+err_out:
+	dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_req, 1,
+			PCI_DMA_TODEVICE);
+	return rc;
+}
+
+/**
+ * pm8001_chip_ssp_io_req - send a SSP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_ccb_info *ccb)
+{
+	struct sas_task *task = ccb->task;
+	struct domain_device *dev = task->dev;
+	struct pm8001_device *pm8001_dev = dev->lldd_dev;
+	struct ssp_ini_io_start_req ssp_cmd;
+	u32 tag = ccb->ccb_tag;
+	int ret;
+	u64 phys_addr;
+	struct inbound_queue_table *circularQ;
+	u32 opc = OPC_INB_SSPINIIOSTART;
+	memset(&ssp_cmd, 0, sizeof(ssp_cmd));
+	memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
+	ssp_cmd.dir_m_tlr =
+		cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0);/*0 for
+	SAS 1.1 compatible TLR*/
+	ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+	ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+	ssp_cmd.tag = cpu_to_le32(tag);
+	if (task->ssp_task.enable_first_burst)
+		ssp_cmd.ssp_iu.efb_prio_attr |= 0x80;
+	ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
+	ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
+	memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
+	       task->ssp_task.cmd->cmd_len);
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+	/* fill in PRD (scatter/gather) table, if any */
+	if (task->num_scatter > 1) {
+		pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
+		phys_addr = ccb->ccb_dma_handle +
+				offsetof(struct pm8001_ccb_info, buf_prd[0]);
+		ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(phys_addr));
+		ssp_cmd.addr_high = cpu_to_le32(upper_32_bits(phys_addr));
+		ssp_cmd.esgl = cpu_to_le32(1<<31);
+	} else if (task->num_scatter == 1) {
+		u64 dma_addr = sg_dma_address(task->scatter);
+		ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr));
+		ssp_cmd.addr_high = cpu_to_le32(upper_32_bits(dma_addr));
+		ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+		ssp_cmd.esgl = 0;
+	} else if (task->num_scatter == 0) {
+		ssp_cmd.addr_low = 0;
+		ssp_cmd.addr_high = 0;
+		ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+		ssp_cmd.esgl = 0;
+	}
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &ssp_cmd, 0);
+	return ret;
+}
+
+static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_ccb_info *ccb)
+{
+	struct sas_task *task = ccb->task;
+	struct domain_device *dev = task->dev;
+	struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
+	u32 tag = ccb->ccb_tag;
+	int ret;
+	struct sata_start_req sata_cmd;
+	u32 hdr_tag, ncg_tag = 0;
+	u64 phys_addr;
+	u32 ATAP = 0x0;
+	u32 dir;
+	struct inbound_queue_table *circularQ;
+	unsigned long flags;
+	u32  opc = OPC_INB_SATA_HOST_OPSTART;
+	memset(&sata_cmd, 0, sizeof(sata_cmd));
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	if (task->data_dir == PCI_DMA_NONE) {
+		ATAP = 0x04;  /* no data*/
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n"));
+	} else if (likely(!task->ata_task.device_control_reg_update)) {
+		if (task->ata_task.dma_xfer) {
+			ATAP = 0x06; /* DMA */
+			PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n"));
+		} else {
+			ATAP = 0x05; /* PIO*/
+			PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
+		}
+		if (task->ata_task.use_ncq &&
+			dev->sata_dev.class != ATA_DEV_ATAPI) {
+			ATAP = 0x07; /* FPDMA */
+			PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
+		}
+	}
+	if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
+		task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+		ncg_tag = hdr_tag;
+	}
+	dir = data_dir_flags[task->data_dir] << 8;
+	sata_cmd.tag = cpu_to_le32(tag);
+	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+	sata_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+	sata_cmd.ncqtag_atap_dir_m =
+		cpu_to_le32(((ncg_tag & 0xff)<<16)|((ATAP & 0x3f) << 10) | dir);
+	sata_cmd.sata_fis = task->ata_task.fis;
+	if (likely(!task->ata_task.device_control_reg_update))
+		sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */
+	sata_cmd.sata_fis.flags &= 0xF0;/* PM_PORT field shall be 0 */
+	/* fill in PRD (scatter/gather) table, if any */
+	if (task->num_scatter > 1) {
+		pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
+		phys_addr = ccb->ccb_dma_handle +
+				offsetof(struct pm8001_ccb_info, buf_prd[0]);
+		sata_cmd.addr_low = lower_32_bits(phys_addr);
+		sata_cmd.addr_high = upper_32_bits(phys_addr);
+		sata_cmd.esgl = cpu_to_le32(1 << 31);
+	} else if (task->num_scatter == 1) {
+		u64 dma_addr = sg_dma_address(task->scatter);
+		sata_cmd.addr_low = lower_32_bits(dma_addr);
+		sata_cmd.addr_high = upper_32_bits(dma_addr);
+		sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+		sata_cmd.esgl = 0;
+	} else if (task->num_scatter == 0) {
+		sata_cmd.addr_low = 0;
+		sata_cmd.addr_high = 0;
+		sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+		sata_cmd.esgl = 0;
+	}
+
+	/* Check for read log for failed drive and return */
+	if (sata_cmd.sata_fis.command == 0x2f) {
+		if (((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) ||
+			(pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) ||
+			(pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) {
+			struct task_status_struct *ts;
+
+			pm8001_ha_dev->id &= 0xDFFFFFFF;
+			ts = &task->task_status;
+
+			spin_lock_irqsave(&task->task_state_lock, flags);
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAM_STAT_GOOD;
+			task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+			task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+			task->task_state_flags |= SAS_TASK_STATE_DONE;
+			if (unlikely((task->task_state_flags &
+					SAS_TASK_STATE_ABORTED))) {
+				spin_unlock_irqrestore(&task->task_state_lock,
+							flags);
+				PM8001_FAIL_DBG(pm8001_ha,
+					pm8001_printk("task 0x%p resp 0x%x "
+					" stat 0x%x but aborted by upper layer "
+					"\n", task, ts->resp, ts->stat));
+				pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+			} else {
+				spin_unlock_irqrestore(&task->task_state_lock,
+							flags);
+				pm8001_ccb_task_free_done(pm8001_ha, task,
+								ccb, tag);
+				return 0;
+			}
+		}
+	}
+
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, 0);
+	return ret;
+}
+
+/**
+ * pm8001_chip_phy_start_req - start phy via PHY_START COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int
+pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
+{
+	struct phy_start_req payload;
+	struct inbound_queue_table *circularQ;
+	int ret;
+	u32 tag = 0x01;
+	u32 opcode = OPC_INB_PHYSTART;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	memset(&payload, 0, sizeof(payload));
+	payload.tag = cpu_to_le32(tag);
+	/*
+	 ** [0:7]   PHY Identifier
+	 ** [8:11]  link rate 1.5G, 3G, 6G
+	 ** [12:13] link mode 01b SAS mode; 10b SATA mode; 11b both
+	 ** [14]    0b disable spin up hold; 1b enable spin up hold
+	 */
+	payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+		LINKMODE_AUTO |	LINKRATE_15 |
+		LINKRATE_30 | LINKRATE_60 | phy_id);
+	payload.sas_identify.dev_type = SAS_END_DEVICE;
+	payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
+	memcpy(payload.sas_identify.sas_addr,
+		pm8001_ha->sas_addr, SAS_ADDR_SIZE);
+	payload.sas_identify.phy_id = phy_id;
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0);
+	return ret;
+}
+
+/**
+ * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+int pm8001_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
+	u8 phy_id)
+{
+	struct phy_stop_req payload;
+	struct inbound_queue_table *circularQ;
+	int ret;
+	u32 tag = 0x01;
+	u32 opcode = OPC_INB_PHYSTOP;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	memset(&payload, 0, sizeof(payload));
+	payload.tag = cpu_to_le32(tag);
+	payload.phy_id = cpu_to_le32(phy_id);
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0);
+	return ret;
+}
+
+/**
+ * see comments on pm8001_mpi_reg_resp.
+ */
+static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_device *pm8001_dev, u32 flag)
+{
+	struct reg_dev_req payload;
+	u32	opc;
+	u32 stp_sspsmp_sata = 0x4;
+	struct inbound_queue_table *circularQ;
+	u32 linkrate, phy_id;
+	int rc, tag = 0xdeadbeef;
+	struct pm8001_ccb_info *ccb;
+	u8 retryFlag = 0x1;
+	u16 firstBurstSize = 0;
+	u16 ITNT = 2000;
+	struct domain_device *dev = pm8001_dev->sas_device;
+	struct domain_device *parent_dev = dev->parent;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+	memset(&payload, 0, sizeof(payload));
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+	if (rc)
+		return rc;
+	ccb = &pm8001_ha->ccb_info[tag];
+	ccb->device = pm8001_dev;
+	ccb->ccb_tag = tag;
+	payload.tag = cpu_to_le32(tag);
+	if (flag == 1)
+		stp_sspsmp_sata = 0x02; /*direct attached sata */
+	else {
+		if (pm8001_dev->dev_type == SAS_SATA_DEV)
+			stp_sspsmp_sata = 0x00; /* stp*/
+		else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+			pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+			pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+			stp_sspsmp_sata = 0x01; /*ssp or smp*/
+	}
+	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
+		phy_id = parent_dev->ex_dev.ex_phy->phy_id;
+	else
+		phy_id = pm8001_dev->attached_phy;
+	opc = OPC_INB_REG_DEV;
+	linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ?
+			pm8001_dev->sas_device->linkrate : dev->port->linkrate;
+	payload.phyid_portid =
+		cpu_to_le32(((pm8001_dev->sas_device->port->id) & 0x0F) |
+		((phy_id & 0x0F) << 4));
+	payload.dtype_dlr_retry = cpu_to_le32((retryFlag & 0x01) |
+		((linkrate & 0x0F) * 0x1000000) |
+		((stp_sspsmp_sata & 0x03) * 0x10000000));
+	payload.firstburstsize_ITNexustimeout =
+		cpu_to_le32(ITNT | (firstBurstSize * 0x10000));
+	memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr,
+		SAS_ADDR_SIZE);
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	return rc;
+}
+
+/**
+ * see comments on pm8001_mpi_reg_resp.
+ */
+int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha,
+	u32 device_id)
+{
+	struct dereg_dev_req payload;
+	u32 opc = OPC_INB_DEREG_DEV_HANDLE;
+	int ret;
+	struct inbound_queue_table *circularQ;
+
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	memset(&payload, 0, sizeof(payload));
+	payload.tag = cpu_to_le32(1);
+	payload.device_id = cpu_to_le32(device_id);
+	PM8001_MSG_DBG(pm8001_ha,
+		pm8001_printk("unregister device device_id = %d\n", device_id));
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	return ret;
+}
+
+/**
+ * pm8001_chip_phy_ctl_req - support the local phy operation
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to operate
+ * @phy_op:
+ */
+static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+	u32 phyId, u32 phy_op)
+{
+	struct local_phy_ctl_req payload;
+	struct inbound_queue_table *circularQ;
+	int ret;
+	u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
+	memset(&payload, 0, sizeof(payload));
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	payload.tag = cpu_to_le32(1);
+	payload.phyop_phyid =
+		cpu_to_le32(((phy_op & 0xff) << 8) | (phyId & 0x0F));
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	return ret;
+}
+
+static u32 pm8001_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 value;
+#ifdef PM8001_USE_MSIX
+	return 1;
+#endif
+	value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
+	if (value)
+		return 1;
+	return 0;
+
+}
+
+/**
+ * pm8001_chip_isr - PM8001 isr handler.
+ * @pm8001_ha: our hba card information.
+ * @irq: irq number.
+ * @stat: stat.
+ */
+static irqreturn_t
+pm8001_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+	pm8001_chip_interrupt_disable(pm8001_ha, vec);
+	process_oq(pm8001_ha, vec);
+	pm8001_chip_interrupt_enable(pm8001_ha, vec);
+	return IRQ_HANDLED;
+}
+
+static int send_task_abort(struct pm8001_hba_info *pm8001_ha, u32 opc,
+	u32 dev_id, u8 flag, u32 task_tag, u32 cmd_tag)
+{
+	struct task_abort_req task_abort;
+	struct inbound_queue_table *circularQ;
+	int ret;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	memset(&task_abort, 0, sizeof(task_abort));
+	if (ABORT_SINGLE == (flag & ABORT_MASK)) {
+		task_abort.abort_all = 0;
+		task_abort.device_id = cpu_to_le32(dev_id);
+		task_abort.tag_to_abort = cpu_to_le32(task_tag);
+		task_abort.tag = cpu_to_le32(cmd_tag);
+	} else if (ABORT_ALL == (flag & ABORT_MASK)) {
+		task_abort.abort_all = cpu_to_le32(1);
+		task_abort.device_id = cpu_to_le32(dev_id);
+		task_abort.tag = cpu_to_le32(cmd_tag);
+	}
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort, 0);
+	return ret;
+}
+
+/**
+ * pm8001_chip_abort_task - SAS abort task when error or exception happened.
+ * @task: the task we wanted to aborted.
+ * @flag: the abort flag.
+ */
+int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_device *pm8001_dev, u8 flag, u32 task_tag, u32 cmd_tag)
+{
+	u32 opc, device_id;
+	int rc = TMF_RESP_FUNC_FAILED;
+	PM8001_EH_DBG(pm8001_ha,
+		pm8001_printk("cmd_tag = %x, abort task tag = 0x%x",
+			cmd_tag, task_tag));
+	if (pm8001_dev->dev_type == SAS_END_DEVICE)
+		opc = OPC_INB_SSP_ABORT;
+	else if (pm8001_dev->dev_type == SAS_SATA_DEV)
+		opc = OPC_INB_SATA_ABORT;
+	else
+		opc = OPC_INB_SMP_ABORT;/* SMP */
+	device_id = pm8001_dev->device_id;
+	rc = send_task_abort(pm8001_ha, opc, device_id, flag,
+		task_tag, cmd_tag);
+	if (rc != TMF_RESP_FUNC_COMPLETE)
+		PM8001_EH_DBG(pm8001_ha, pm8001_printk("rc= %d\n", rc));
+	return rc;
+}
+
+/**
+ * pm8001_chip_ssp_tm_req - built the task management command.
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information.
+ * @tmf: task management function.
+ */
+int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
+{
+	struct sas_task *task = ccb->task;
+	struct domain_device *dev = task->dev;
+	struct pm8001_device *pm8001_dev = dev->lldd_dev;
+	u32 opc = OPC_INB_SSPINITMSTART;
+	struct inbound_queue_table *circularQ;
+	struct ssp_ini_tm_start_req sspTMCmd;
+	int ret;
+
+	memset(&sspTMCmd, 0, sizeof(sspTMCmd));
+	sspTMCmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+	sspTMCmd.relate_tag = cpu_to_le32(tmf->tag_of_task_to_be_managed);
+	sspTMCmd.tmf = cpu_to_le32(tmf->tmf);
+	memcpy(sspTMCmd.lun, task->ssp_task.LUN, 8);
+	sspTMCmd.tag = cpu_to_le32(ccb->ccb_tag);
+	if (pm8001_ha->chip_id != chip_8001)
+		sspTMCmd.ds_ads_m = 0x08;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sspTMCmd, 0);
+	return ret;
+}
+
+int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
+	void *payload)
+{
+	u32 opc = OPC_INB_GET_NVMD_DATA;
+	u32 nvmd_type;
+	int rc;
+	u32 tag;
+	struct pm8001_ccb_info *ccb;
+	struct inbound_queue_table *circularQ;
+	struct get_nvm_data_req nvmd_req;
+	struct fw_control_ex *fw_control_context;
+	struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+	nvmd_type = ioctl_payload->minor_function;
+	fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+	if (!fw_control_context)
+		return -ENOMEM;
+	fw_control_context->usrAddr = (u8 *)ioctl_payload->func_specific;
+	fw_control_context->len = ioctl_payload->length;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	memset(&nvmd_req, 0, sizeof(nvmd_req));
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+	if (rc) {
+		kfree(fw_control_context);
+		return rc;
+	}
+	ccb = &pm8001_ha->ccb_info[tag];
+	ccb->ccb_tag = tag;
+	ccb->fw_control_context = fw_control_context;
+	nvmd_req.tag = cpu_to_le32(tag);
+
+	switch (nvmd_type) {
+	case TWI_DEVICE: {
+		u32 twi_addr, twi_page_size;
+		twi_addr = 0xa8;
+		twi_page_size = 2;
+
+		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
+			twi_page_size << 8 | TWI_DEVICE);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_addr_hi =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+		nvmd_req.resp_addr_lo =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+		break;
+	}
+	case C_SEEPROM: {
+		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_addr_hi =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+		nvmd_req.resp_addr_lo =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+		break;
+	}
+	case VPD_FLASH: {
+		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_addr_hi =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+		nvmd_req.resp_addr_lo =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+		break;
+	}
+	case EXPAN_ROM: {
+		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_addr_hi =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+		nvmd_req.resp_addr_lo =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+		break;
+	}
+	case IOP_RDUMP: {
+		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | IOP_RDUMP);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.vpd_offset = cpu_to_le32(ioctl_payload->offset);
+		nvmd_req.resp_addr_hi =
+		cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+		nvmd_req.resp_addr_lo =
+		cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+		break;
+	}
+	default:
+		break;
+	}
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req, 0);
+	if (rc) {
+		kfree(fw_control_context);
+		pm8001_tag_free(pm8001_ha, tag);
+	}
+	return rc;
+}
+
+int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
+	void *payload)
+{
+	u32 opc = OPC_INB_SET_NVMD_DATA;
+	u32 nvmd_type;
+	int rc;
+	u32 tag;
+	struct pm8001_ccb_info *ccb;
+	struct inbound_queue_table *circularQ;
+	struct set_nvm_data_req nvmd_req;
+	struct fw_control_ex *fw_control_context;
+	struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+	nvmd_type = ioctl_payload->minor_function;
+	fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+	if (!fw_control_context)
+		return -ENOMEM;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	memcpy(pm8001_ha->memoryMap.region[NVMD].virt_ptr,
+		&ioctl_payload->func_specific,
+		ioctl_payload->length);
+	memset(&nvmd_req, 0, sizeof(nvmd_req));
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+	if (rc) {
+		kfree(fw_control_context);
+		return -EBUSY;
+	}
+	ccb = &pm8001_ha->ccb_info[tag];
+	ccb->fw_control_context = fw_control_context;
+	ccb->ccb_tag = tag;
+	nvmd_req.tag = cpu_to_le32(tag);
+	switch (nvmd_type) {
+	case TWI_DEVICE: {
+		u32 twi_addr, twi_page_size;
+		twi_addr = 0xa8;
+		twi_page_size = 2;
+		nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
+			twi_page_size << 8 | TWI_DEVICE);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.resp_addr_hi =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+		nvmd_req.resp_addr_lo =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+		break;
+	}
+	case C_SEEPROM:
+		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+		nvmd_req.resp_addr_hi =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+		nvmd_req.resp_addr_lo =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+		break;
+	case VPD_FLASH:
+		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+		nvmd_req.resp_addr_hi =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+		nvmd_req.resp_addr_lo =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+		break;
+	case EXPAN_ROM:
+		nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
+		nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+		nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+		nvmd_req.resp_addr_hi =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+		nvmd_req.resp_addr_lo =
+		    cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+		break;
+	default:
+		break;
+	}
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req, 0);
+	if (rc) {
+		kfree(fw_control_context);
+		pm8001_tag_free(pm8001_ha, tag);
+	}
+	return rc;
+}
+
+/**
+ * pm8001_chip_fw_flash_update_build - support the firmware update operation
+ * @pm8001_ha: our hba card information.
+ * @fw_flash_updata_info: firmware flash update param
+ */
+int
+pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha,
+	void *fw_flash_updata_info, u32 tag)
+{
+	struct fw_flash_Update_req payload;
+	struct fw_flash_updata_info *info;
+	struct inbound_queue_table *circularQ;
+	int ret;
+	u32 opc = OPC_INB_FW_FLASH_UPDATE;
+
+	memset(&payload, 0, sizeof(struct fw_flash_Update_req));
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	info = fw_flash_updata_info;
+	payload.tag = cpu_to_le32(tag);
+	payload.cur_image_len = cpu_to_le32(info->cur_image_len);
+	payload.cur_image_offset = cpu_to_le32(info->cur_image_offset);
+	payload.total_image_len = cpu_to_le32(info->total_image_len);
+	payload.len = info->sgl.im_len.len ;
+	payload.sgl_addr_lo =
+		cpu_to_le32(lower_32_bits(le64_to_cpu(info->sgl.addr)));
+	payload.sgl_addr_hi =
+		cpu_to_le32(upper_32_bits(le64_to_cpu(info->sgl.addr)));
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	return ret;
+}
+
+int
+pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
+	void *payload)
+{
+	struct fw_flash_updata_info flash_update_info;
+	struct fw_control_info *fw_control;
+	struct fw_control_ex *fw_control_context;
+	int rc;
+	u32 tag;
+	struct pm8001_ccb_info *ccb;
+	void *buffer = pm8001_ha->memoryMap.region[FW_FLASH].virt_ptr;
+	dma_addr_t phys_addr = pm8001_ha->memoryMap.region[FW_FLASH].phys_addr;
+	struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+	fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+	if (!fw_control_context)
+		return -ENOMEM;
+	fw_control = (struct fw_control_info *)&ioctl_payload->func_specific;
+	memcpy(buffer, fw_control->buffer, fw_control->len);
+	flash_update_info.sgl.addr = cpu_to_le64(phys_addr);
+	flash_update_info.sgl.im_len.len = cpu_to_le32(fw_control->len);
+	flash_update_info.sgl.im_len.e = 0;
+	flash_update_info.cur_image_offset = fw_control->offset;
+	flash_update_info.cur_image_len = fw_control->len;
+	flash_update_info.total_image_len = fw_control->size;
+	fw_control_context->fw_control = fw_control;
+	fw_control_context->virtAddr = buffer;
+	fw_control_context->phys_addr = phys_addr;
+	fw_control_context->len = fw_control->len;
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+	if (rc) {
+		kfree(fw_control_context);
+		return -EBUSY;
+	}
+	ccb = &pm8001_ha->ccb_info[tag];
+	ccb->fw_control_context = fw_control_context;
+	ccb->ccb_tag = tag;
+	rc = pm8001_chip_fw_flash_update_build(pm8001_ha, &flash_update_info,
+		tag);
+	return rc;
+}
+
+ssize_t
+pm8001_get_gsm_dump(struct device *cdev, u32 length, char *buf)
+{
+	u32 value, rem, offset = 0, bar = 0;
+	u32 index, work_offset, dw_length;
+	u32 shift_value, gsm_base, gsm_dump_offset;
+	char *direct_data;
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+	direct_data = buf;
+	gsm_dump_offset = pm8001_ha->fatal_forensic_shift_offset;
+
+	/* check max is 1 Mbytes */
+	if ((length > 0x100000) || (gsm_dump_offset & 3) ||
+		((gsm_dump_offset + length) > 0x1000000))
+			return -EINVAL;
+
+	if (pm8001_ha->chip_id == chip_8001)
+		bar = 2;
+	else
+		bar = 1;
+
+	work_offset = gsm_dump_offset & 0xFFFF0000;
+	offset = gsm_dump_offset & 0x0000FFFF;
+	gsm_dump_offset = work_offset;
+	/* adjust length to dword boundary */
+	rem = length & 3;
+	dw_length = length >> 2;
+
+	for (index = 0; index < dw_length; index++) {
+		if ((work_offset + offset) & 0xFFFF0000) {
+			if (pm8001_ha->chip_id == chip_8001)
+				shift_value = ((gsm_dump_offset + offset) &
+						SHIFT_REG_64K_MASK);
+			else
+				shift_value = (((gsm_dump_offset + offset) &
+						SHIFT_REG_64K_MASK) >>
+						SHIFT_REG_BIT_SHIFT);
+
+			if (pm8001_ha->chip_id == chip_8001) {
+				gsm_base = GSM_BASE;
+				if (-1 == pm8001_bar4_shift(pm8001_ha,
+						(gsm_base + shift_value)))
+					return -EIO;
+			} else {
+				gsm_base = 0;
+				if (-1 == pm80xx_bar4_shift(pm8001_ha,
+						(gsm_base + shift_value)))
+					return -EIO;
+			}
+			gsm_dump_offset = (gsm_dump_offset + offset) &
+						0xFFFF0000;
+			work_offset = 0;
+			offset = offset & 0x0000FFFF;
+		}
+		value = pm8001_cr32(pm8001_ha, bar, (work_offset + offset) &
+						0x0000FFFF);
+		direct_data += sprintf(direct_data, "%08x ", value);
+		offset += 4;
+	}
+	if (rem != 0) {
+		value = pm8001_cr32(pm8001_ha, bar, (work_offset + offset) &
+						0x0000FFFF);
+		/* xfr for non_dw */
+		direct_data += sprintf(direct_data, "%08x ", value);
+	}
+	/* Shift back to BAR4 original address */
+	if (-1 == pm8001_bar4_shift(pm8001_ha, 0))
+			return -EIO;
+	pm8001_ha->fatal_forensic_shift_offset += 1024;
+
+	if (pm8001_ha->fatal_forensic_shift_offset >= 0x100000)
+		pm8001_ha->fatal_forensic_shift_offset = 0;
+	return direct_data - buf;
+}
+
+int
+pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_device *pm8001_dev, u32 state)
+{
+	struct set_dev_state_req payload;
+	struct inbound_queue_table *circularQ;
+	struct pm8001_ccb_info *ccb;
+	int rc;
+	u32 tag;
+	u32 opc = OPC_INB_SET_DEVICE_STATE;
+	memset(&payload, 0, sizeof(payload));
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+	if (rc)
+		return -1;
+	ccb = &pm8001_ha->ccb_info[tag];
+	ccb->ccb_tag = tag;
+	ccb->device = pm8001_dev;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	payload.tag = cpu_to_le32(tag);
+	payload.device_id = cpu_to_le32(pm8001_dev->device_id);
+	payload.nds = cpu_to_le32(state);
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	return rc;
+
+}
+
+static int
+pm8001_chip_sas_re_initialization(struct pm8001_hba_info *pm8001_ha)
+{
+	struct sas_re_initialization_req payload;
+	struct inbound_queue_table *circularQ;
+	struct pm8001_ccb_info *ccb;
+	int rc;
+	u32 tag;
+	u32 opc = OPC_INB_SAS_RE_INITIALIZE;
+	memset(&payload, 0, sizeof(payload));
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+	if (rc)
+		return -ENOMEM;
+	ccb = &pm8001_ha->ccb_info[tag];
+	ccb->ccb_tag = tag;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	payload.tag = cpu_to_le32(tag);
+	payload.SSAHOLT = cpu_to_le32(0xd << 25);
+	payload.sata_hol_tmo = cpu_to_le32(80);
+	payload.open_reject_cmdretries_data_retries = cpu_to_le32(0xff00ff);
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	if (rc)
+		pm8001_tag_free(pm8001_ha, tag);
+	return rc;
+
+}
+
+const struct pm8001_dispatch pm8001_8001_dispatch = {
+	.name			= "pmc8001",
+	.chip_init		= pm8001_chip_init,
+	.chip_soft_rst		= pm8001_chip_soft_rst,
+	.chip_rst		= pm8001_hw_chip_rst,
+	.chip_iounmap		= pm8001_chip_iounmap,
+	.isr			= pm8001_chip_isr,
+	.is_our_interupt	= pm8001_chip_is_our_interupt,
+	.isr_process_oq		= process_oq,
+	.interrupt_enable 	= pm8001_chip_interrupt_enable,
+	.interrupt_disable	= pm8001_chip_interrupt_disable,
+	.make_prd		= pm8001_chip_make_sg,
+	.smp_req		= pm8001_chip_smp_req,
+	.ssp_io_req		= pm8001_chip_ssp_io_req,
+	.sata_req		= pm8001_chip_sata_req,
+	.phy_start_req		= pm8001_chip_phy_start_req,
+	.phy_stop_req		= pm8001_chip_phy_stop_req,
+	.reg_dev_req		= pm8001_chip_reg_dev_req,
+	.dereg_dev_req		= pm8001_chip_dereg_dev_req,
+	.phy_ctl_req		= pm8001_chip_phy_ctl_req,
+	.task_abort		= pm8001_chip_abort_task,
+	.ssp_tm_req		= pm8001_chip_ssp_tm_req,
+	.get_nvmd_req		= pm8001_chip_get_nvmd_req,
+	.set_nvmd_req		= pm8001_chip_set_nvmd_req,
+	.fw_flash_update_req	= pm8001_chip_fw_flash_update_req,
+	.set_dev_state_req	= pm8001_chip_set_dev_state_req,
+	.sas_re_init_req	= pm8001_chip_sas_re_initialization,
+};
diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
new file mode 100644
index 000000000..e4867e690
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_hwi.h
@@ -0,0 +1,1038 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+#ifndef _PMC8001_REG_H_
+#define _PMC8001_REG_H_
+
+#include <linux/types.h>
+#include <scsi/libsas.h>
+
+
+/* for Request Opcode of IOMB */
+#define OPC_INB_ECHO				1	/* 0x000 */
+#define OPC_INB_PHYSTART			4	/* 0x004 */
+#define OPC_INB_PHYSTOP				5	/* 0x005 */
+#define OPC_INB_SSPINIIOSTART			6	/* 0x006 */
+#define OPC_INB_SSPINITMSTART			7	/* 0x007 */
+#define OPC_INB_SSPINIEXTIOSTART		8	/* 0x008 */
+#define OPC_INB_DEV_HANDLE_ACCEPT		9	/* 0x009 */
+#define OPC_INB_SSPTGTIOSTART			10	/* 0x00A */
+#define OPC_INB_SSPTGTRSPSTART			11	/* 0x00B */
+#define OPC_INB_SSPINIEDCIOSTART		12	/* 0x00C */
+#define OPC_INB_SSPINIEXTEDCIOSTART		13	/* 0x00D */
+#define OPC_INB_SSPTGTEDCIOSTART		14	/* 0x00E */
+#define OPC_INB_SSP_ABORT			15	/* 0x00F */
+#define OPC_INB_DEREG_DEV_HANDLE		16	/* 0x010 */
+#define OPC_INB_GET_DEV_HANDLE			17	/* 0x011 */
+#define OPC_INB_SMP_REQUEST			18	/* 0x012 */
+/* SMP_RESPONSE is removed */
+#define OPC_INB_SMP_RESPONSE			19	/* 0x013 */
+#define OPC_INB_SMP_ABORT			20	/* 0x014 */
+#define OPC_INB_REG_DEV				22	/* 0x016 */
+#define OPC_INB_SATA_HOST_OPSTART		23	/* 0x017 */
+#define OPC_INB_SATA_ABORT			24	/* 0x018 */
+#define OPC_INB_LOCAL_PHY_CONTROL		25	/* 0x019 */
+#define OPC_INB_GET_DEV_INFO			26	/* 0x01A */
+#define OPC_INB_FW_FLASH_UPDATE			32	/* 0x020 */
+#define OPC_INB_GPIO				34	/* 0x022 */
+#define OPC_INB_SAS_DIAG_MODE_START_END		35	/* 0x023 */
+#define OPC_INB_SAS_DIAG_EXECUTE		36	/* 0x024 */
+#define OPC_INB_SAS_HW_EVENT_ACK		37	/* 0x025 */
+#define OPC_INB_GET_TIME_STAMP			38	/* 0x026 */
+#define OPC_INB_PORT_CONTROL			39	/* 0x027 */
+#define OPC_INB_GET_NVMD_DATA			40	/* 0x028 */
+#define OPC_INB_SET_NVMD_DATA			41	/* 0x029 */
+#define OPC_INB_SET_DEVICE_STATE		42	/* 0x02A */
+#define OPC_INB_GET_DEVICE_STATE		43	/* 0x02B */
+#define OPC_INB_SET_DEV_INFO			44	/* 0x02C */
+#define OPC_INB_SAS_RE_INITIALIZE		45	/* 0x02D */
+
+/* for Response Opcode of IOMB */
+#define OPC_OUB_ECHO				1	/* 0x001 */
+#define OPC_OUB_HW_EVENT			4	/* 0x004 */
+#define OPC_OUB_SSP_COMP			5	/* 0x005 */
+#define OPC_OUB_SMP_COMP			6	/* 0x006 */
+#define OPC_OUB_LOCAL_PHY_CNTRL			7	/* 0x007 */
+#define OPC_OUB_DEV_REGIST			10	/* 0x00A */
+#define OPC_OUB_DEREG_DEV			11	/* 0x00B */
+#define OPC_OUB_GET_DEV_HANDLE			12	/* 0x00C */
+#define OPC_OUB_SATA_COMP			13	/* 0x00D */
+#define OPC_OUB_SATA_EVENT			14	/* 0x00E */
+#define OPC_OUB_SSP_EVENT			15	/* 0x00F */
+#define OPC_OUB_DEV_HANDLE_ARRIV		16	/* 0x010 */
+/* SMP_RECEIVED Notification is removed */
+#define OPC_OUB_SMP_RECV_EVENT			17	/* 0x011 */
+#define OPC_OUB_SSP_RECV_EVENT			18	/* 0x012 */
+#define OPC_OUB_DEV_INFO			19	/* 0x013 */
+#define OPC_OUB_FW_FLASH_UPDATE			20	/* 0x014 */
+#define OPC_OUB_GPIO_RESPONSE			22	/* 0x016 */
+#define OPC_OUB_GPIO_EVENT			23	/* 0x017 */
+#define OPC_OUB_GENERAL_EVENT			24	/* 0x018 */
+#define OPC_OUB_SSP_ABORT_RSP			26	/* 0x01A */
+#define OPC_OUB_SATA_ABORT_RSP			27	/* 0x01B */
+#define OPC_OUB_SAS_DIAG_MODE_START_END		28	/* 0x01C */
+#define OPC_OUB_SAS_DIAG_EXECUTE		29	/* 0x01D */
+#define OPC_OUB_GET_TIME_STAMP			30	/* 0x01E */
+#define OPC_OUB_SAS_HW_EVENT_ACK		31	/* 0x01F */
+#define OPC_OUB_PORT_CONTROL			32	/* 0x020 */
+#define OPC_OUB_SKIP_ENTRY			33	/* 0x021 */
+#define OPC_OUB_SMP_ABORT_RSP			34	/* 0x022 */
+#define OPC_OUB_GET_NVMD_DATA			35	/* 0x023 */
+#define OPC_OUB_SET_NVMD_DATA			36	/* 0x024 */
+#define OPC_OUB_DEVICE_HANDLE_REMOVAL		37	/* 0x025 */
+#define OPC_OUB_SET_DEVICE_STATE		38	/* 0x026 */
+#define OPC_OUB_GET_DEVICE_STATE		39	/* 0x027 */
+#define OPC_OUB_SET_DEV_INFO			40	/* 0x028 */
+#define OPC_OUB_SAS_RE_INITIALIZE		41	/* 0x029 */
+
+/* for phy start*/
+#define SPINHOLD_DISABLE		(0x00 << 14)
+#define SPINHOLD_ENABLE			(0x01 << 14)
+#define LINKMODE_SAS			(0x01 << 12)
+#define LINKMODE_DSATA			(0x02 << 12)
+#define LINKMODE_AUTO			(0x03 << 12)
+#define LINKRATE_15			(0x01 << 8)
+#define LINKRATE_30			(0x02 << 8)
+#define LINKRATE_60			(0x04 << 8)
+
+/* for phy state */
+
+#define PHY_STATE_LINK_UP_SPC		0x1
+
+/* for new SPC controllers MEMBASE III is shared between BIOS and DATA */
+#define GSM_SM_BASE			0x4F0000
+struct mpi_msg_hdr{
+	__le32	header;	/* Bits [11:0]  - Message operation code */
+	/* Bits [15:12] - Message Category */
+	/* Bits [21:16] - Outboundqueue ID for the
+	operation completion message */
+	/* Bits [23:22] - Reserved */
+	/* Bits [28:24] - Buffer Count, indicates how
+	many buffer are allocated for the massage */
+	/* Bits [30:29] - Reserved */
+	/* Bits [31] - Message Valid bit */
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to describe enable the phy (64 bytes)
+ */
+struct phy_start_req {
+	__le32	tag;
+	__le32	ase_sh_lm_slr_phyid;
+	struct sas_identify_frame sas_identify;
+	u32	reserved[5];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to disable the phy (64 bytes)
+ */
+struct phy_stop_req {
+	__le32	tag;
+	__le32	phy_id;
+	u32	reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/* set device bits fis - device to host */
+struct  set_dev_bits_fis {
+	u8	fis_type;	/* 0xA1*/
+	u8	n_i_pmport;
+	/* b7 : n Bit. Notification bit. If set device needs attention. */
+	/* b6 : i Bit. Interrupt Bit */
+	/* b5-b4: reserved2 */
+	/* b3-b0: PM Port */
+	u8 	status;
+	u8	error;
+	u32	_r_a;
+} __attribute__ ((packed));
+/* PIO setup FIS - device to host */
+struct  pio_setup_fis {
+	u8	fis_type;	/* 0x5f */
+	u8	i_d_pmPort;
+	/* b7 : reserved */
+	/* b6 : i bit. Interrupt bit */
+	/* b5 : d bit. data transfer direction. set to 1 for device to host
+	xfer */
+	/* b4 : reserved */
+	/* b3-b0: PM Port */
+	u8	status;
+	u8	error;
+	u8	lbal;
+	u8	lbam;
+	u8	lbah;
+	u8	device;
+	u8	lbal_exp;
+	u8	lbam_exp;
+	u8	lbah_exp;
+	u8	_r_a;
+	u8	sector_count;
+	u8	sector_count_exp;
+	u8	_r_b;
+	u8	e_status;
+	u8	_r_c[2];
+	u8	transfer_count;
+} __attribute__ ((packed));
+
+/*
+ * brief the data structure of SATA Completion Response
+ * use to describe the sata task response (64 bytes)
+ */
+struct sata_completion_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	param;
+	u32	sata_resp[12];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of SAS HW Event Notification
+ * use to alert the host about the hardware event(64 bytes)
+ */
+struct hw_event_resp {
+	__le32	lr_evt_status_phyid_portid;
+	__le32	evt_param;
+	__le32	npip_portstate;
+	struct sas_identify_frame	sas_identify;
+	struct dev_to_host_fis	sata_fis;
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of  REGISTER DEVICE Command
+ * use to describe MPI REGISTER DEVICE Command (64 bytes)
+ */
+
+struct reg_dev_req {
+	__le32	tag;
+	__le32	phyid_portid;
+	__le32	dtype_dlr_retry;
+	__le32	firstburstsize_ITNexustimeout;
+	u8	sas_addr[SAS_ADDR_SIZE];
+	__le32	upper_device_id;
+	u32	reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of  DEREGISTER DEVICE Command
+ * use to request spc to remove all internal resources associated
+ * with the device id (64 bytes)
+ */
+
+struct dereg_dev_req {
+	__le32	tag;
+	__le32	device_id;
+	u32	reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of DEVICE_REGISTRATION Response
+ * use to notify the completion of the device registration  (64 bytes)
+ */
+
+struct dev_reg_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	device_id;
+	u32	reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of Local PHY Control Command
+ * use to issue PHY CONTROL to local phy (64 bytes)
+ */
+struct local_phy_ctl_req {
+	__le32	tag;
+	__le32	phyop_phyid;
+	u32	reserved1[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Local Phy Control Response
+ * use to describe MPI Local Phy Control Response (64 bytes)
+ */
+struct local_phy_ctl_resp {
+	__le32	tag;
+	__le32	phyop_phyid;
+	__le32	status;
+	u32	reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+#define OP_BITS 0x0000FF00
+#define ID_BITS 0x000000FF
+
+/*
+ * brief the data structure of PORT Control Command
+ * use to control port properties (64 bytes)
+ */
+
+struct port_ctl_req {
+	__le32	tag;
+	__le32	portop_portid;
+	__le32	param0;
+	__le32	param1;
+	u32	reserved1[11];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of HW Event Ack Command
+ * use to acknowledge receive HW event (64 bytes)
+ */
+
+struct hw_event_ack_req {
+	__le32	tag;
+	__le32	sea_phyid_portid;
+	__le32	param0;
+	__le32	param1;
+	u32	reserved1[11];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of SSP Completion Response
+ * use to indicate a SSP Completion  (n bytes)
+ */
+struct ssp_completion_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	param;
+	__le32	ssptag_rescv_rescpad;
+	struct ssp_response_iu  ssp_resp_iu;
+	__le32	residual_count;
+} __attribute__((packed, aligned(4)));
+
+
+#define SSP_RESCV_BIT	0x00010000
+
+/*
+ * brief the data structure of SATA EVNET esponse
+ * use to indicate a SATA Completion  (64 bytes)
+ */
+
+struct sata_event_resp {
+	__le32	tag;
+	__le32	event;
+	__le32	port_id;
+	__le32	device_id;
+	u32	reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SSP EVNET esponse
+ * use to indicate a SSP Completion  (64 bytes)
+ */
+
+struct ssp_event_resp {
+	__le32	tag;
+	__le32	event;
+	__le32	port_id;
+	__le32	device_id;
+	u32	reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of General Event Notification Response
+ * use to describe MPI General Event Notification Response (64 bytes)
+ */
+struct general_event_resp {
+	__le32	status;
+	__le32	inb_IOMB_payload[14];
+} __attribute__((packed, aligned(4)));
+
+
+#define GENERAL_EVENT_PAYLOAD	14
+#define OPCODE_BITS	0x00000fff
+
+/*
+ * brief the data structure of SMP Request Command
+ * use to describe MPI SMP REQUEST Command (64 bytes)
+ */
+struct smp_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	len_ip_ir;
+	/* Bits [0]  - Indirect response */
+	/* Bits [1] - Indirect Payload */
+	/* Bits [15:2] - Reserved */
+	/* Bits [23:16] - direct payload Len */
+	/* Bits [31:24] - Reserved */
+	u8	smp_req16[16];
+	union {
+		u8	smp_req[32];
+		struct {
+			__le64 long_req_addr;/* sg dma address, LE */
+			__le32 long_req_size;/* LE */
+			u32	_r_a;
+			__le64 long_resp_addr;/* sg dma address, LE */
+			__le32 long_resp_size;/* LE */
+			u32	_r_b;
+			} long_smp_req;/* sequencer extension */
+	};
+} __attribute__((packed, aligned(4)));
+/*
+ * brief the data structure of SMP Completion Response
+ * use to describe MPI SMP Completion Response (64 bytes)
+ */
+struct smp_completion_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	param;
+	__le32	_r_a[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ *brief the data structure of SSP SMP SATA Abort Command
+ * use to describe MPI SSP SMP & SATA Abort Command (64 bytes)
+ */
+struct task_abort_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	tag_to_abort;
+	__le32	abort_all;
+	u32	reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/* These flags used for SSP SMP & SATA Abort */
+#define ABORT_MASK		0x3
+#define ABORT_SINGLE		0x0
+#define ABORT_ALL		0x1
+
+/**
+ * brief the data structure of SSP SATA SMP Abort Response
+ * use to describe SSP SMP & SATA Abort Response ( 64 bytes)
+ */
+struct task_abort_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	scp;
+	u32	reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Command
+ * use to describe MPI SAS Diagnostic Start/End Command (64 bytes)
+ */
+struct sas_diag_start_end_req {
+	__le32	tag;
+	__le32	operation_phyid;
+	u32	reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Command
+ * use to describe MPI SAS Diagnostic Execute Command (64 bytes)
+ */
+struct sas_diag_execute_req{
+	__le32	tag;
+	__le32	cmdtype_cmddesc_phyid;
+	__le32	pat1_pat2;
+	__le32	threshold;
+	__le32	codepat_errmsk;
+	__le32	pmon;
+	__le32	pERF1CTL;
+	u32	reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+#define SAS_DIAG_PARAM_BYTES 24
+
+/*
+ * brief the data structure of Set Device State Command
+ * use to describe MPI Set Device State Command (64 bytes)
+ */
+struct set_dev_state_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	nds;
+	u32	reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of sas_re_initialization
+ */
+struct sas_re_initialization_req {
+
+	__le32	tag;
+	__le32	SSAHOLT;/* bit29-set max port;
+			** bit28-set open reject cmd retries.
+			** bit27-set open reject data retries.
+			** bit26-set open reject option, remap:1 or not:0.
+			** bit25-set sata head of line time out.
+			*/
+	__le32 reserved_maxPorts;
+	__le32 open_reject_cmdretries_data_retries;/* cmd retries: 31-bit16;
+						    * data retries: bit15-bit0.
+						    */
+	__le32	sata_hol_tmo;
+	u32	reserved1[10];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SATA Start Command
+ * use to describe MPI SATA IO Start Command (64 bytes)
+ */
+
+struct sata_start_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	data_len;
+	__le32	ncqtag_atap_dir_m;
+	struct host_to_dev_fis	sata_fis;
+	u32	reserved1;
+	u32	reserved2;
+	u32	addr_low;
+	u32	addr_high;
+	__le32	len;
+	__le32	esgl;
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP INI TM Start Command
+ * use to describe MPI SSP INI TM Start Command (64 bytes)
+ */
+struct ssp_ini_tm_start_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	relate_tag;
+	__le32	tmf;
+	u8	lun[8];
+	__le32	ds_ads_m;
+	u32	reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+struct ssp_info_unit {
+	u8	lun[8];/* SCSI Logical Unit Number */
+	u8	reserved1;/* reserved */
+	u8	efb_prio_attr;
+	/* B7   : enabledFirstBurst */
+	/* B6-3 : taskPriority */
+	/* B2-0 : taskAttribute */
+	u8	reserved2;	/* reserved */
+	u8	additional_cdb_len;
+	/* B7-2 : additional_cdb_len */
+	/* B1-0 : reserved */
+	u8	cdb[16];/* The SCSI CDB up to 16 bytes length */
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SSP INI IO Start Command
+ * use to describe MPI SSP INI IO Start Command (64 bytes)
+ */
+struct ssp_ini_io_start_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	data_len;
+	__le32	dir_m_tlr;
+	struct ssp_info_unit	ssp_iu;
+	__le32	addr_low;
+	__le32	addr_high;
+	__le32	len;
+	__le32	esgl;
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Firmware download
+ * use to describe MPI FW DOWNLOAD Command (64 bytes)
+ */
+struct fw_flash_Update_req {
+	__le32	tag;
+	__le32	cur_image_offset;
+	__le32	cur_image_len;
+	__le32	total_image_len;
+	u32	reserved0[7];
+	__le32	sgl_addr_lo;
+	__le32	sgl_addr_hi;
+	__le32	len;
+	__le32	ext_reserved;
+} __attribute__((packed, aligned(4)));
+
+
+#define FWFLASH_IOMB_RESERVED_LEN 0x07
+/**
+ * brief the data structure of FW_FLASH_UPDATE Response
+ * use to describe MPI FW_FLASH_UPDATE Response (64 bytes)
+ *
+ */
+struct fw_flash_Update_resp {
+	__le32	tag;
+	__le32	status;
+	u32	reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Get NVM Data Command
+ * use to get data from NVM in HBA(64 bytes)
+ */
+struct get_nvm_data_req {
+	__le32	tag;
+	__le32	len_ir_vpdd;
+	__le32	vpd_offset;
+	u32	reserved[8];
+	__le32	resp_addr_lo;
+	__le32	resp_addr_hi;
+	__le32	resp_len;
+	u32	reserved1;
+} __attribute__((packed, aligned(4)));
+
+
+struct set_nvm_data_req {
+	__le32	tag;
+	__le32	len_ir_vpdd;
+	__le32	vpd_offset;
+	__le32	reserved[8];
+	__le32	resp_addr_lo;
+	__le32	resp_addr_hi;
+	__le32	resp_len;
+	u32	reserved1;
+} __attribute__((packed, aligned(4)));
+
+
+#define TWI_DEVICE	0x0
+#define C_SEEPROM	0x1
+#define VPD_FLASH	0x4
+#define AAP1_RDUMP	0x5
+#define IOP_RDUMP	0x6
+#define EXPAN_ROM	0x7
+
+#define IPMode		0x80000000
+#define NVMD_TYPE	0x0000000F
+#define NVMD_STAT	0x0000FFFF
+#define NVMD_LEN	0xFF000000
+/**
+ * brief the data structure of Get NVMD Data Response
+ * use to describe MPI Get NVMD Data Response (64 bytes)
+ */
+struct get_nvm_data_resp {
+	__le32		tag;
+	__le32		ir_tda_bn_dps_das_nvm;
+	__le32		dlen_status;
+	__le32		nvm_data[12];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Response
+ * use to describe MPI SAS Diagnostic Start/End Response (64 bytes)
+ *
+ */
+struct sas_diag_start_end_resp {
+	__le32		tag;
+	__le32		status;
+	u32		reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Response
+ * use to describe MPI SAS Diagnostic Execute Response (64 bytes)
+ *
+ */
+struct sas_diag_execute_resp {
+	__le32		tag;
+	__le32		cmdtype_cmddesc_phyid;
+	__le32		Status;
+	__le32		ReportData;
+	u32		reserved[11];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Set Device State Response
+ * use to describe MPI Set Device State Response (64 bytes)
+ *
+ */
+struct set_dev_state_resp {
+	__le32		tag;
+	__le32		status;
+	__le32		device_id;
+	__le32		pds_nds;
+	u32		reserved[11];
+} __attribute__((packed, aligned(4)));
+
+
+#define NDS_BITS 0x0F
+#define PDS_BITS 0xF0
+
+/*
+ * HW Events type
+ */
+
+#define HW_EVENT_RESET_START			0x01
+#define HW_EVENT_CHIP_RESET_COMPLETE		0x02
+#define HW_EVENT_PHY_STOP_STATUS		0x03
+#define HW_EVENT_SAS_PHY_UP			0x04
+#define HW_EVENT_SATA_PHY_UP			0x05
+#define HW_EVENT_SATA_SPINUP_HOLD		0x06
+#define HW_EVENT_PHY_DOWN			0x07
+#define HW_EVENT_PORT_INVALID			0x08
+#define HW_EVENT_BROADCAST_CHANGE		0x09
+#define HW_EVENT_PHY_ERROR			0x0A
+#define HW_EVENT_BROADCAST_SES			0x0B
+#define HW_EVENT_INBOUND_CRC_ERROR		0x0C
+#define HW_EVENT_HARD_RESET_RECEIVED		0x0D
+#define HW_EVENT_MALFUNCTION			0x0E
+#define HW_EVENT_ID_FRAME_TIMEOUT		0x0F
+#define HW_EVENT_BROADCAST_EXP			0x10
+#define HW_EVENT_PHY_START_STATUS		0x11
+#define HW_EVENT_LINK_ERR_INVALID_DWORD		0x12
+#define HW_EVENT_LINK_ERR_DISPARITY_ERROR	0x13
+#define HW_EVENT_LINK_ERR_CODE_VIOLATION	0x14
+#define HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH	0x15
+#define HW_EVENT_LINK_ERR_PHY_RESET_FAILED	0x16
+#define HW_EVENT_PORT_RECOVERY_TIMER_TMO	0x17
+#define HW_EVENT_PORT_RECOVER			0x18
+#define HW_EVENT_PORT_RESET_TIMER_TMO		0x19
+#define HW_EVENT_PORT_RESET_COMPLETE		0x20
+#define EVENT_BROADCAST_ASYNCH_EVENT		0x21
+
+/* port state */
+#define PORT_NOT_ESTABLISHED			0x00
+#define PORT_VALID				0x01
+#define PORT_LOSTCOMM				0x02
+#define PORT_IN_RESET				0x04
+#define PORT_INVALID				0x08
+
+/*
+ * SSP/SMP/SATA IO Completion Status values
+ */
+
+#define IO_SUCCESS				0x00
+#define IO_ABORTED				0x01
+#define IO_OVERFLOW				0x02
+#define IO_UNDERFLOW				0x03
+#define IO_FAILED				0x04
+#define IO_ABORT_RESET				0x05
+#define IO_NOT_VALID				0x06
+#define IO_NO_DEVICE				0x07
+#define IO_ILLEGAL_PARAMETER			0x08
+#define IO_LINK_FAILURE				0x09
+#define IO_PROG_ERROR				0x0A
+#define IO_EDC_IN_ERROR				0x0B
+#define IO_EDC_OUT_ERROR			0x0C
+#define IO_ERROR_HW_TIMEOUT			0x0D
+#define IO_XFER_ERROR_BREAK			0x0E
+#define IO_XFER_ERROR_PHY_NOT_READY		0x0F
+#define IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED	0x10
+#define IO_OPEN_CNX_ERROR_ZONE_VIOLATION		0x11
+#define IO_OPEN_CNX_ERROR_BREAK				0x12
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS			0x13
+#define IO_OPEN_CNX_ERROR_BAD_DESTINATION		0x14
+#define IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED	0x15
+#define IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY		0x16
+#define IO_OPEN_CNX_ERROR_WRONG_DESTINATION		0x17
+#define IO_OPEN_CNX_ERROR_UNKNOWN_ERROR			0x18
+#define IO_XFER_ERROR_NAK_RECEIVED			0x19
+#define IO_XFER_ERROR_ACK_NAK_TIMEOUT			0x1A
+#define IO_XFER_ERROR_PEER_ABORTED			0x1B
+#define IO_XFER_ERROR_RX_FRAME				0x1C
+#define IO_XFER_ERROR_DMA				0x1D
+#define IO_XFER_ERROR_CREDIT_TIMEOUT			0x1E
+#define IO_XFER_ERROR_SATA_LINK_TIMEOUT			0x1F
+#define IO_XFER_ERROR_SATA				0x20
+#define IO_XFER_ERROR_ABORTED_DUE_TO_SRST		0x22
+#define IO_XFER_ERROR_REJECTED_NCQ_MODE			0x21
+#define IO_XFER_ERROR_ABORTED_NCQ_MODE			0x23
+#define IO_XFER_OPEN_RETRY_TIMEOUT			0x24
+#define IO_XFER_SMP_RESP_CONNECTION_ERROR		0x25
+#define IO_XFER_ERROR_UNEXPECTED_PHASE			0x26
+#define IO_XFER_ERROR_XFER_RDY_OVERRUN			0x27
+#define IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED		0x28
+
+#define IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT		0x30
+#define IO_XFER_ERROR_CMD_ISSUE_BREAK_BEFORE_ACK_NAK	0x31
+#define IO_XFER_ERROR_CMD_ISSUE_PHY_DOWN_BEFORE_ACK_NAK	0x32
+
+#define IO_XFER_ERROR_OFFSET_MISMATCH			0x34
+#define IO_XFER_ERROR_XFER_ZERO_DATA_LEN		0x35
+#define IO_XFER_CMD_FRAME_ISSUED			0x36
+#define IO_ERROR_INTERNAL_SMP_RESOURCE			0x37
+#define IO_PORT_IN_RESET				0x38
+#define IO_DS_NON_OPERATIONAL				0x39
+#define IO_DS_IN_RECOVERY				0x3A
+#define IO_TM_TAG_NOT_FOUND				0x3B
+#define IO_XFER_PIO_SETUP_ERROR				0x3C
+#define IO_SSP_EXT_IU_ZERO_LEN_ERROR			0x3D
+#define IO_DS_IN_ERROR					0x3E
+#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY		0x3F
+#define IO_ABORT_IN_PROGRESS				0x40
+#define IO_ABORT_DELAYED				0x41
+#define IO_INVALID_LENGTH				0x42
+
+/* WARNING: This error code must always be the last number.
+ * If you add error code, modify this code also
+ * It is used as an index
+ */
+#define IO_ERROR_UNKNOWN_GENERIC			0x43
+
+/* MSGU CONFIGURATION  TABLE*/
+
+#define SPC_MSGU_CFG_TABLE_UPDATE		0x01/* Inbound doorbell bit0 */
+#define SPC_MSGU_CFG_TABLE_RESET		0x02/* Inbound doorbell bit1 */
+#define SPC_MSGU_CFG_TABLE_FREEZE		0x04/* Inbound doorbell bit2 */
+#define SPC_MSGU_CFG_TABLE_UNFREEZE		0x08/* Inbound doorbell bit4 */
+#define MSGU_IBDB_SET				0x04
+#define MSGU_HOST_INT_STATUS			0x08
+#define MSGU_HOST_INT_MASK			0x0C
+#define MSGU_IOPIB_INT_STATUS			0x18
+#define MSGU_IOPIB_INT_MASK			0x1C
+#define MSGU_IBDB_CLEAR				0x20/* RevB - Host not use */
+#define MSGU_MSGU_CONTROL			0x24
+#define MSGU_ODR				0x3C/* RevB */
+#define MSGU_ODCR				0x40/* RevB */
+#define MSGU_SCRATCH_PAD_0			0x44
+#define MSGU_SCRATCH_PAD_1			0x48
+#define MSGU_SCRATCH_PAD_2			0x4C
+#define MSGU_SCRATCH_PAD_3			0x50
+#define MSGU_HOST_SCRATCH_PAD_0			0x54
+#define MSGU_HOST_SCRATCH_PAD_1			0x58
+#define MSGU_HOST_SCRATCH_PAD_2			0x5C
+#define MSGU_HOST_SCRATCH_PAD_3			0x60
+#define MSGU_HOST_SCRATCH_PAD_4			0x64
+#define MSGU_HOST_SCRATCH_PAD_5			0x68
+#define MSGU_HOST_SCRATCH_PAD_6			0x6C
+#define MSGU_HOST_SCRATCH_PAD_7			0x70
+#define MSGU_ODMR				0x74/* RevB */
+
+/* bit definition for ODMR register */
+#define ODMR_MASK_ALL				0xFFFFFFFF/* mask all
+					interrupt vector */
+#define ODMR_CLEAR_ALL				0/* clear all
+					interrupt vector */
+/* bit definition for ODCR register */
+#define ODCR_CLEAR_ALL		0xFFFFFFFF   /* mask all
+					interrupt vector*/
+/* MSIX Interupts */
+#define MSIX_TABLE_OFFSET		0x2000
+#define MSIX_TABLE_ELEMENT_SIZE		0x10
+#define MSIX_INTERRUPT_CONTROL_OFFSET	0xC
+#define MSIX_TABLE_BASE	  (MSIX_TABLE_OFFSET + MSIX_INTERRUPT_CONTROL_OFFSET)
+#define MSIX_INTERRUPT_DISABLE		0x1
+#define MSIX_INTERRUPT_ENABLE		0x0
+
+
+/* state definition for Scratch Pad1 register */
+#define SCRATCH_PAD1_POR		0x00  /* power on reset state */
+#define SCRATCH_PAD1_SFR		0x01  /* soft reset state */
+#define SCRATCH_PAD1_ERR		0x02  /* error state */
+#define SCRATCH_PAD1_RDY		0x03  /* ready state */
+#define SCRATCH_PAD1_RST		0x04  /* soft reset toggle flag */
+#define SCRATCH_PAD1_AAP1RDY_RST	0x08  /* AAP1 ready for soft reset */
+#define SCRATCH_PAD1_STATE_MASK		0xFFFFFFF0   /* ScratchPad1
+ Mask, bit1-0 State, bit2 Soft Reset, bit3 FW RDY for Soft Reset */
+#define SCRATCH_PAD1_RESERVED		0x000003F8   /* Scratch Pad1
+ Reserved bit 3 to 9 */
+
+ /* state definition for Scratch Pad2 register */
+#define SCRATCH_PAD2_POR		0x00  /* power on state */
+#define SCRATCH_PAD2_SFR		0x01  /* soft reset state */
+#define SCRATCH_PAD2_ERR		0x02  /* error state */
+#define SCRATCH_PAD2_RDY		0x03  /* ready state */
+#define SCRATCH_PAD2_FWRDY_RST		0x04  /* FW ready for soft reset flag*/
+#define SCRATCH_PAD2_IOPRDY_RST		0x08  /* IOP ready for soft reset */
+#define SCRATCH_PAD2_STATE_MASK		0xFFFFFFF4 /* ScratchPad 2
+ Mask, bit1-0 State */
+#define SCRATCH_PAD2_RESERVED		0x000003FC   /* Scratch Pad1
+ Reserved bit 2 to 9 */
+
+#define SCRATCH_PAD_ERROR_MASK		0xFFFFFC00   /* Error mask bits */
+#define SCRATCH_PAD_STATE_MASK		0x00000003   /* State Mask bits */
+
+/* main configuration offset - byte offset */
+#define MAIN_SIGNATURE_OFFSET		0x00/* DWORD 0x00 */
+#define MAIN_INTERFACE_REVISION		0x04/* DWORD 0x01 */
+#define MAIN_FW_REVISION		0x08/* DWORD 0x02 */
+#define MAIN_MAX_OUTSTANDING_IO_OFFSET	0x0C/* DWORD 0x03 */
+#define MAIN_MAX_SGL_OFFSET		0x10/* DWORD 0x04 */
+#define MAIN_CNTRL_CAP_OFFSET		0x14/* DWORD 0x05 */
+#define MAIN_GST_OFFSET			0x18/* DWORD 0x06 */
+#define MAIN_IBQ_OFFSET			0x1C/* DWORD 0x07 */
+#define MAIN_OBQ_OFFSET			0x20/* DWORD 0x08 */
+#define MAIN_IQNPPD_HPPD_OFFSET		0x24/* DWORD 0x09 */
+#define MAIN_OB_HW_EVENT_PID03_OFFSET	0x28/* DWORD 0x0A */
+#define MAIN_OB_HW_EVENT_PID47_OFFSET	0x2C/* DWORD 0x0B */
+#define MAIN_OB_NCQ_EVENT_PID03_OFFSET	0x30/* DWORD 0x0C */
+#define MAIN_OB_NCQ_EVENT_PID47_OFFSET	0x34/* DWORD 0x0D */
+#define MAIN_TITNX_EVENT_PID03_OFFSET	0x38/* DWORD 0x0E */
+#define MAIN_TITNX_EVENT_PID47_OFFSET	0x3C/* DWORD 0x0F */
+#define MAIN_OB_SSP_EVENT_PID03_OFFSET	0x40/* DWORD 0x10 */
+#define MAIN_OB_SSP_EVENT_PID47_OFFSET	0x44/* DWORD 0x11 */
+#define MAIN_OB_SMP_EVENT_PID03_OFFSET	0x48/* DWORD 0x12 */
+#define MAIN_OB_SMP_EVENT_PID47_OFFSET	0x4C/* DWORD 0x13 */
+#define MAIN_EVENT_LOG_ADDR_HI		0x50/* DWORD 0x14 */
+#define MAIN_EVENT_LOG_ADDR_LO		0x54/* DWORD 0x15 */
+#define MAIN_EVENT_LOG_BUFF_SIZE	0x58/* DWORD 0x16 */
+#define MAIN_EVENT_LOG_OPTION		0x5C/* DWORD 0x17 */
+#define MAIN_IOP_EVENT_LOG_ADDR_HI	0x60/* DWORD 0x18 */
+#define MAIN_IOP_EVENT_LOG_ADDR_LO	0x64/* DWORD 0x19 */
+#define MAIN_IOP_EVENT_LOG_BUFF_SIZE	0x68/* DWORD 0x1A */
+#define MAIN_IOP_EVENT_LOG_OPTION	0x6C/* DWORD 0x1B */
+#define MAIN_FATAL_ERROR_INTERRUPT	0x70/* DWORD 0x1C */
+#define MAIN_FATAL_ERROR_RDUMP0_OFFSET	0x74/* DWORD 0x1D */
+#define MAIN_FATAL_ERROR_RDUMP0_LENGTH	0x78/* DWORD 0x1E */
+#define MAIN_FATAL_ERROR_RDUMP1_OFFSET	0x7C/* DWORD 0x1F */
+#define MAIN_FATAL_ERROR_RDUMP1_LENGTH	0x80/* DWORD 0x20 */
+#define MAIN_HDA_FLAGS_OFFSET		0x84/* DWORD 0x21 */
+#define MAIN_ANALOG_SETUP_OFFSET	0x88/* DWORD 0x22 */
+
+/* Gereral Status Table offset - byte offset */
+#define GST_GSTLEN_MPIS_OFFSET		0x00
+#define GST_IQ_FREEZE_STATE0_OFFSET	0x04
+#define GST_IQ_FREEZE_STATE1_OFFSET	0x08
+#define GST_MSGUTCNT_OFFSET		0x0C
+#define GST_IOPTCNT_OFFSET		0x10
+#define GST_PHYSTATE_OFFSET		0x18
+#define GST_PHYSTATE0_OFFSET		0x18
+#define GST_PHYSTATE1_OFFSET		0x1C
+#define GST_PHYSTATE2_OFFSET		0x20
+#define GST_PHYSTATE3_OFFSET		0x24
+#define GST_PHYSTATE4_OFFSET		0x28
+#define GST_PHYSTATE5_OFFSET		0x2C
+#define GST_PHYSTATE6_OFFSET		0x30
+#define GST_PHYSTATE7_OFFSET		0x34
+#define GST_RERRINFO_OFFSET		0x44
+
+/* General Status Table - MPI state */
+#define GST_MPI_STATE_UNINIT		0x00
+#define GST_MPI_STATE_INIT		0x01
+#define GST_MPI_STATE_TERMINATION	0x02
+#define GST_MPI_STATE_ERROR		0x03
+#define GST_MPI_STATE_MASK		0x07
+
+#define MBIC_NMI_ENABLE_VPE0_IOP	0x000418
+#define MBIC_NMI_ENABLE_VPE0_AAP1	0x000418
+/* PCIE registers - BAR2(0x18), BAR1(win) 0x010000 */
+#define PCIE_EVENT_INTERRUPT_ENABLE	0x003040
+#define PCIE_EVENT_INTERRUPT		0x003044
+#define PCIE_ERROR_INTERRUPT_ENABLE	0x003048
+#define PCIE_ERROR_INTERRUPT		0x00304C
+/* signature definition for host scratch pad0 register */
+#define SPC_SOFT_RESET_SIGNATURE	0x252acbcd
+/* Signature for Soft Reset */
+
+/* SPC Reset register - BAR4(0x20), BAR2(win) (need dynamic mapping) */
+#define SPC_REG_RESET			0x000000/* reset register */
+
+/* bit difination for SPC_RESET register */
+#define   SPC_REG_RESET_OSSP		0x00000001
+#define   SPC_REG_RESET_RAAE		0x00000002
+#define   SPC_REG_RESET_PCS_SPBC	0x00000004
+#define   SPC_REG_RESET_PCS_IOP_SS	0x00000008
+#define   SPC_REG_RESET_PCS_AAP1_SS	0x00000010
+#define   SPC_REG_RESET_PCS_AAP2_SS	0x00000020
+#define   SPC_REG_RESET_PCS_LM		0x00000040
+#define   SPC_REG_RESET_PCS		0x00000080
+#define   SPC_REG_RESET_GSM		0x00000100
+#define   SPC_REG_RESET_DDR2		0x00010000
+#define   SPC_REG_RESET_BDMA_CORE	0x00020000
+#define   SPC_REG_RESET_BDMA_SXCBI	0x00040000
+#define   SPC_REG_RESET_PCIE_AL_SXCBI	0x00080000
+#define   SPC_REG_RESET_PCIE_PWR	0x00100000
+#define   SPC_REG_RESET_PCIE_SFT	0x00200000
+#define   SPC_REG_RESET_PCS_SXCBI	0x00400000
+#define   SPC_REG_RESET_LMS_SXCBI	0x00800000
+#define   SPC_REG_RESET_PMIC_SXCBI	0x01000000
+#define   SPC_REG_RESET_PMIC_CORE	0x02000000
+#define   SPC_REG_RESET_PCIE_PC_SXCBI	0x04000000
+#define   SPC_REG_RESET_DEVICE		0x80000000
+
+/* registers for BAR Shifting - BAR2(0x18), BAR1(win) */
+#define SPC_IBW_AXI_TRANSLATION_LOW	0x003258
+
+#define MBIC_AAP1_ADDR_BASE		0x060000
+#define MBIC_IOP_ADDR_BASE		0x070000
+#define GSM_ADDR_BASE			0x0700000
+/* Dynamic map through Bar4 - 0x00700000 */
+#define GSM_CONFIG_RESET		0x00000000
+#define RAM_ECC_DB_ERR			0x00000018
+#define GSM_READ_ADDR_PARITY_INDIC	0x00000058
+#define GSM_WRITE_ADDR_PARITY_INDIC	0x00000060
+#define GSM_WRITE_DATA_PARITY_INDIC	0x00000068
+#define GSM_READ_ADDR_PARITY_CHECK	0x00000038
+#define GSM_WRITE_ADDR_PARITY_CHECK	0x00000040
+#define GSM_WRITE_DATA_PARITY_CHECK	0x00000048
+
+#define RB6_ACCESS_REG			0x6A0000
+#define HDAC_EXEC_CMD			0x0002
+#define HDA_C_PA			0xcb
+#define HDA_SEQ_ID_BITS			0x00ff0000
+#define HDA_GSM_OFFSET_BITS		0x00FFFFFF
+#define MBIC_AAP1_ADDR_BASE		0x060000
+#define MBIC_IOP_ADDR_BASE		0x070000
+#define GSM_ADDR_BASE			0x0700000
+#define SPC_TOP_LEVEL_ADDR_BASE		0x000000
+#define GSM_CONFIG_RESET_VALUE          0x00003b00
+#define GPIO_ADDR_BASE                  0x00090000
+#define GPIO_GPIO_0_0UTPUT_CTL_OFFSET   0x0000010c
+
+/* RB6 offset */
+#define SPC_RB6_OFFSET			0x80C0
+/* Magic number of  soft reset for RB6 */
+#define RB6_MAGIC_NUMBER_RST		0x1234
+
+/* Device Register status */
+#define DEVREG_SUCCESS					0x00
+#define DEVREG_FAILURE_OUT_OF_RESOURCE			0x01
+#define DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED	0x02
+#define DEVREG_FAILURE_INVALID_PHY_ID			0x03
+#define DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED	0x04
+#define DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE		0x05
+#define DEVREG_FAILURE_PORT_NOT_VALID_STATE		0x06
+#define DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID		0x07
+
+#define GSM_BASE					0x4F0000
+#define SHIFT_REG_64K_MASK				0xffff0000
+#define SHIFT_REG_BIT_SHIFT				8
+#endif
+
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
new file mode 100644
index 000000000..65555916d
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -0,0 +1,1226 @@
+/*
+ * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include <linux/slab.h>
+#include "pm8001_sas.h"
+#include "pm8001_chips.h"
+
+static struct scsi_transport_template *pm8001_stt;
+
+/**
+ * chip info structure to identify chip key functionality as
+ * encryption available/not, no of ports, hw specific function ref
+ */
+static const struct pm8001_chip_info pm8001_chips[] = {
+	[chip_8001] = {0,  8, &pm8001_8001_dispatch,},
+	[chip_8008] = {0,  8, &pm8001_80xx_dispatch,},
+	[chip_8009] = {1,  8, &pm8001_80xx_dispatch,},
+	[chip_8018] = {0,  16, &pm8001_80xx_dispatch,},
+	[chip_8019] = {1,  16, &pm8001_80xx_dispatch,},
+	[chip_8074] = {0,  8, &pm8001_80xx_dispatch,},
+	[chip_8076] = {0,  16, &pm8001_80xx_dispatch,},
+	[chip_8077] = {0,  16, &pm8001_80xx_dispatch,},
+};
+static int pm8001_id;
+
+LIST_HEAD(hba_list);
+
+struct workqueue_struct *pm8001_wq;
+
+/**
+ * The main structure which LLDD must register for scsi core.
+ */
+static struct scsi_host_template pm8001_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= sas_slave_configure,
+	.scan_finished		= pm8001_scan_finished,
+	.scan_start		= pm8001_scan_start,
+	.change_queue_depth	= sas_change_queue_depth,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.cmd_per_lun		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.eh_device_reset_handler = sas_eh_device_reset_handler,
+	.eh_bus_reset_handler	= sas_eh_bus_reset_handler,
+	.target_destroy		= sas_target_destroy,
+	.ioctl			= sas_ioctl,
+	.shost_attrs		= pm8001_host_attrs,
+	.use_blk_tags		= 1,
+	.track_queue_depth	= 1,
+};
+
+/**
+ * Sas layer call this function to execute specific task.
+ */
+static struct sas_domain_function_template pm8001_transport_ops = {
+	.lldd_dev_found		= pm8001_dev_found,
+	.lldd_dev_gone		= pm8001_dev_gone,
+
+	.lldd_execute_task	= pm8001_queue_command,
+	.lldd_control_phy	= pm8001_phy_control,
+
+	.lldd_abort_task	= pm8001_abort_task,
+	.lldd_abort_task_set	= pm8001_abort_task_set,
+	.lldd_clear_aca		= pm8001_clear_aca,
+	.lldd_clear_task_set	= pm8001_clear_task_set,
+	.lldd_I_T_nexus_reset   = pm8001_I_T_nexus_reset,
+	.lldd_lu_reset		= pm8001_lu_reset,
+	.lldd_query_task	= pm8001_query_task,
+};
+
+/**
+ *pm8001_phy_init - initiate our adapter phys
+ *@pm8001_ha: our hba structure.
+ *@phy_id: phy id.
+ */
+static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
+{
+	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+	phy->phy_state = 0;
+	phy->pm8001_ha = pm8001_ha;
+	sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
+	sas_phy->class = SAS;
+	sas_phy->iproto = SAS_PROTOCOL_ALL;
+	sas_phy->tproto = 0;
+	sas_phy->type = PHY_TYPE_PHYSICAL;
+	sas_phy->role = PHY_ROLE_INITIATOR;
+	sas_phy->oob_mode = OOB_NOT_CONNECTED;
+	sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+	sas_phy->id = phy_id;
+	sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
+	sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+	sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
+	sas_phy->lldd_phy = phy;
+}
+
+/**
+ *pm8001_free - free hba
+ *@pm8001_ha:	our hba structure.
+ *
+ */
+static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
+{
+	int i;
+
+	if (!pm8001_ha)
+		return;
+
+	for (i = 0; i < USI_MAX_MEMCNT; i++) {
+		if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
+			pci_free_consistent(pm8001_ha->pdev,
+				(pm8001_ha->memoryMap.region[i].total_len +
+				pm8001_ha->memoryMap.region[i].alignment),
+				pm8001_ha->memoryMap.region[i].virt_ptr,
+				pm8001_ha->memoryMap.region[i].phys_addr);
+			}
+	}
+	PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
+	if (pm8001_ha->shost)
+		scsi_host_put(pm8001_ha->shost);
+	flush_workqueue(pm8001_wq);
+	kfree(pm8001_ha->tags);
+	kfree(pm8001_ha);
+}
+
+#ifdef PM8001_USE_TASKLET
+
+/**
+ * tasklet for 64 msi-x interrupt handler
+ * @opaque: the passed general host adapter struct
+ * Note: pm8001_tasklet is common for pm8001 & pm80xx
+ */
+static void pm8001_tasklet(unsigned long opaque)
+{
+	struct pm8001_hba_info *pm8001_ha;
+	struct isr_param *irq_vector;
+
+	irq_vector = (struct isr_param *)opaque;
+	pm8001_ha = irq_vector->drv_inst;
+	if (unlikely(!pm8001_ha))
+		BUG_ON(1);
+	PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
+}
+#endif
+
+/**
+ * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
+ * It obtains the vector number and calls the equivalent bottom
+ * half or services directly.
+ * @opaque: the passed outbound queue/vector. Host structure is
+ * retrieved from the same.
+ */
+static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
+{
+	struct isr_param *irq_vector;
+	struct pm8001_hba_info *pm8001_ha;
+	irqreturn_t ret = IRQ_HANDLED;
+	irq_vector = (struct isr_param *)opaque;
+	pm8001_ha = irq_vector->drv_inst;
+
+	if (unlikely(!pm8001_ha))
+		return IRQ_NONE;
+	if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
+		return IRQ_NONE;
+#ifdef PM8001_USE_TASKLET
+	tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
+#else
+	ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
+#endif
+	return ret;
+}
+
+/**
+ * pm8001_interrupt_handler_intx - main INTx interrupt handler.
+ * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure.
+ */
+
+static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
+{
+	struct pm8001_hba_info *pm8001_ha;
+	irqreturn_t ret = IRQ_HANDLED;
+	struct sas_ha_struct *sha = dev_id;
+	pm8001_ha = sha->lldd_ha;
+	if (unlikely(!pm8001_ha))
+		return IRQ_NONE;
+	if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
+		return IRQ_NONE;
+
+#ifdef PM8001_USE_TASKLET
+	tasklet_schedule(&pm8001_ha->tasklet[0]);
+#else
+	ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
+#endif
+	return ret;
+}
+
+/**
+ * pm8001_alloc - initiate our hba structure and 6 DMAs area.
+ * @pm8001_ha:our hba structure.
+ *
+ */
+static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
+			const struct pci_device_id *ent)
+{
+	int i;
+	spin_lock_init(&pm8001_ha->lock);
+	spin_lock_init(&pm8001_ha->bitmap_lock);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("pm8001_alloc: PHY:%x\n",
+				pm8001_ha->chip->n_phy));
+	for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+		pm8001_phy_init(pm8001_ha, i);
+		pm8001_ha->port[i].wide_port_phymap = 0;
+		pm8001_ha->port[i].port_attached = 0;
+		pm8001_ha->port[i].port_state = 0;
+		INIT_LIST_HEAD(&pm8001_ha->port[i].list);
+	}
+
+	pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL);
+	if (!pm8001_ha->tags)
+		goto err_out;
+	/* MPI Memory region 1 for AAP Event Log for fw */
+	pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
+	pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
+	pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
+	pm8001_ha->memoryMap.region[AAP1].alignment = 32;
+
+	/* MPI Memory region 2 for IOP Event Log for fw */
+	pm8001_ha->memoryMap.region[IOP].num_elements = 1;
+	pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
+	pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
+	pm8001_ha->memoryMap.region[IOP].alignment = 32;
+
+	for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
+		/* MPI Memory region 3 for consumer Index of inbound queues */
+		pm8001_ha->memoryMap.region[CI+i].num_elements = 1;
+		pm8001_ha->memoryMap.region[CI+i].element_size = 4;
+		pm8001_ha->memoryMap.region[CI+i].total_len = 4;
+		pm8001_ha->memoryMap.region[CI+i].alignment = 4;
+
+		if ((ent->driver_data) != chip_8001) {
+			/* MPI Memory region 5 inbound queues */
+			pm8001_ha->memoryMap.region[IB+i].num_elements =
+						PM8001_MPI_QUEUE;
+			pm8001_ha->memoryMap.region[IB+i].element_size = 128;
+			pm8001_ha->memoryMap.region[IB+i].total_len =
+						PM8001_MPI_QUEUE * 128;
+			pm8001_ha->memoryMap.region[IB+i].alignment = 128;
+		} else {
+			pm8001_ha->memoryMap.region[IB+i].num_elements =
+						PM8001_MPI_QUEUE;
+			pm8001_ha->memoryMap.region[IB+i].element_size = 64;
+			pm8001_ha->memoryMap.region[IB+i].total_len =
+						PM8001_MPI_QUEUE * 64;
+			pm8001_ha->memoryMap.region[IB+i].alignment = 64;
+		}
+	}
+
+	for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
+		/* MPI Memory region 4 for producer Index of outbound queues */
+		pm8001_ha->memoryMap.region[PI+i].num_elements = 1;
+		pm8001_ha->memoryMap.region[PI+i].element_size = 4;
+		pm8001_ha->memoryMap.region[PI+i].total_len = 4;
+		pm8001_ha->memoryMap.region[PI+i].alignment = 4;
+
+		if (ent->driver_data != chip_8001) {
+			/* MPI Memory region 6 Outbound queues */
+			pm8001_ha->memoryMap.region[OB+i].num_elements =
+						PM8001_MPI_QUEUE;
+			pm8001_ha->memoryMap.region[OB+i].element_size = 128;
+			pm8001_ha->memoryMap.region[OB+i].total_len =
+						PM8001_MPI_QUEUE * 128;
+			pm8001_ha->memoryMap.region[OB+i].alignment = 128;
+		} else {
+			/* MPI Memory region 6 Outbound queues */
+			pm8001_ha->memoryMap.region[OB+i].num_elements =
+						PM8001_MPI_QUEUE;
+			pm8001_ha->memoryMap.region[OB+i].element_size = 64;
+			pm8001_ha->memoryMap.region[OB+i].total_len =
+						PM8001_MPI_QUEUE * 64;
+			pm8001_ha->memoryMap.region[OB+i].alignment = 64;
+		}
+
+	}
+	/* Memory region write DMA*/
+	pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
+	pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
+	pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
+	/* Memory region for devices*/
+	pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
+	pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
+		sizeof(struct pm8001_device);
+	pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
+		sizeof(struct pm8001_device);
+
+	/* Memory region for ccb_info*/
+	pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
+	pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
+		sizeof(struct pm8001_ccb_info);
+	pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
+		sizeof(struct pm8001_ccb_info);
+
+	/* Memory region for fw flash */
+	pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
+
+	pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1;
+	pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000;
+	pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000;
+	pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000;
+	for (i = 0; i < USI_MAX_MEMCNT; i++) {
+		if (pm8001_mem_alloc(pm8001_ha->pdev,
+			&pm8001_ha->memoryMap.region[i].virt_ptr,
+			&pm8001_ha->memoryMap.region[i].phys_addr,
+			&pm8001_ha->memoryMap.region[i].phys_addr_hi,
+			&pm8001_ha->memoryMap.region[i].phys_addr_lo,
+			pm8001_ha->memoryMap.region[i].total_len,
+			pm8001_ha->memoryMap.region[i].alignment) != 0) {
+				PM8001_FAIL_DBG(pm8001_ha,
+					pm8001_printk("Mem%d alloc failed\n",
+					i));
+				goto err_out;
+		}
+	}
+
+	pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
+	for (i = 0; i < PM8001_MAX_DEVICES; i++) {
+		pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
+		pm8001_ha->devices[i].id = i;
+		pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
+		pm8001_ha->devices[i].running_req = 0;
+	}
+	pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
+	for (i = 0; i < PM8001_MAX_CCB; i++) {
+		pm8001_ha->ccb_info[i].ccb_dma_handle =
+			pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
+			i * sizeof(struct pm8001_ccb_info);
+		pm8001_ha->ccb_info[i].task = NULL;
+		pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
+		pm8001_ha->ccb_info[i].device = NULL;
+		++pm8001_ha->tags_num;
+	}
+	pm8001_ha->flags = PM8001F_INIT_TIME;
+	/* Initialize tags */
+	pm8001_tag_init(pm8001_ha);
+	return 0;
+err_out:
+	return 1;
+}
+
+/**
+ * pm8001_ioremap - remap the pci high physical address to kernal virtual
+ * address so that we can access them.
+ * @pm8001_ha:our hba structure.
+ */
+static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 bar;
+	u32 logicalBar = 0;
+	struct pci_dev *pdev;
+
+	pdev = pm8001_ha->pdev;
+	/* map pci mem (PMC pci base 0-3)*/
+	for (bar = 0; bar < 6; bar++) {
+		/*
+		** logical BARs for SPC:
+		** bar 0 and 1 - logical BAR0
+		** bar 2 and 3 - logical BAR1
+		** bar4 - logical BAR2
+		** bar5 - logical BAR3
+		** Skip the appropriate assignments:
+		*/
+		if ((bar == 1) || (bar == 3))
+			continue;
+		if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
+			pm8001_ha->io_mem[logicalBar].membase =
+				pci_resource_start(pdev, bar);
+			pm8001_ha->io_mem[logicalBar].membase &=
+				(u32)PCI_BASE_ADDRESS_MEM_MASK;
+			pm8001_ha->io_mem[logicalBar].memsize =
+				pci_resource_len(pdev, bar);
+			pm8001_ha->io_mem[logicalBar].memvirtaddr =
+				ioremap(pm8001_ha->io_mem[logicalBar].membase,
+				pm8001_ha->io_mem[logicalBar].memsize);
+			PM8001_INIT_DBG(pm8001_ha,
+				pm8001_printk("PCI: bar %d, logicalBar %d ",
+				bar, logicalBar));
+			PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+				"base addr %llx virt_addr=%llx len=%d\n",
+				(u64)pm8001_ha->io_mem[logicalBar].membase,
+				(u64)(unsigned long)
+				pm8001_ha->io_mem[logicalBar].memvirtaddr,
+				pm8001_ha->io_mem[logicalBar].memsize));
+		} else {
+			pm8001_ha->io_mem[logicalBar].membase	= 0;
+			pm8001_ha->io_mem[logicalBar].memsize	= 0;
+			pm8001_ha->io_mem[logicalBar].memvirtaddr = 0;
+		}
+		logicalBar++;
+	}
+	return 0;
+}
+
+/**
+ * pm8001_pci_alloc - initialize our ha card structure
+ * @pdev: pci device.
+ * @ent: ent
+ * @shost: scsi host struct which has been initialized before.
+ */
+static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
+				 const struct pci_device_id *ent,
+				struct Scsi_Host *shost)
+
+{
+	struct pm8001_hba_info *pm8001_ha;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	int j;
+
+	pm8001_ha = sha->lldd_ha;
+	if (!pm8001_ha)
+		return NULL;
+
+	pm8001_ha->pdev = pdev;
+	pm8001_ha->dev = &pdev->dev;
+	pm8001_ha->chip_id = ent->driver_data;
+	pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
+	pm8001_ha->irq = pdev->irq;
+	pm8001_ha->sas = sha;
+	pm8001_ha->shost = shost;
+	pm8001_ha->id = pm8001_id++;
+	pm8001_ha->logging_level = 0x01;
+	sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
+	/* IOMB size is 128 for 8088/89 controllers */
+	if (pm8001_ha->chip_id != chip_8001)
+		pm8001_ha->iomb_size = IOMB_SIZE_SPCV;
+	else
+		pm8001_ha->iomb_size = IOMB_SIZE_SPC;
+
+#ifdef PM8001_USE_TASKLET
+	/* Tasklet for non msi-x interrupt handler */
+	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+		tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
+			(unsigned long)&(pm8001_ha->irq_vector[0]));
+	else
+		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+			tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
+				(unsigned long)&(pm8001_ha->irq_vector[j]));
+#endif
+	pm8001_ioremap(pm8001_ha);
+	if (!pm8001_alloc(pm8001_ha, ent))
+		return pm8001_ha;
+	pm8001_free(pm8001_ha);
+	return NULL;
+}
+
+/**
+ * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
+ * @pdev: pci device.
+ */
+static int pci_go_44(struct pci_dev *pdev)
+{
+	int rc;
+
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) {
+		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44));
+		if (rc) {
+			rc = pci_set_consistent_dma_mask(pdev,
+				DMA_BIT_MASK(32));
+			if (rc) {
+				dev_printk(KERN_ERR, &pdev->dev,
+					"44-bit DMA enable failed\n");
+				return rc;
+			}
+		}
+	} else {
+		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				"32-bit DMA enable failed\n");
+			return rc;
+		}
+		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				"32-bit consistent DMA enable failed\n");
+			return rc;
+		}
+	}
+	return rc;
+}
+
+/**
+ * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
+ * @shost: scsi host which has been allocated outside.
+ * @chip_info: our ha struct.
+ */
+static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
+				   const struct pm8001_chip_info *chip_info)
+{
+	int phy_nr, port_nr;
+	struct asd_sas_phy **arr_phy;
+	struct asd_sas_port **arr_port;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+	phy_nr = chip_info->n_phy;
+	port_nr = phy_nr;
+	memset(sha, 0x00, sizeof(*sha));
+	arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
+	if (!arr_phy)
+		goto exit;
+	arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
+	if (!arr_port)
+		goto exit_free2;
+
+	sha->sas_phy = arr_phy;
+	sha->sas_port = arr_port;
+	sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
+	if (!sha->lldd_ha)
+		goto exit_free1;
+
+	shost->transportt = pm8001_stt;
+	shost->max_id = PM8001_MAX_DEVICES;
+	shost->max_lun = 8;
+	shost->max_channel = 0;
+	shost->unique_id = pm8001_id;
+	shost->max_cmd_len = 16;
+	shost->can_queue = PM8001_CAN_QUEUE;
+	shost->cmd_per_lun = 32;
+	return 0;
+exit_free1:
+	kfree(arr_port);
+exit_free2:
+	kfree(arr_phy);
+exit:
+	return -1;
+}
+
+/**
+ * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
+ * @shost: scsi host which has been allocated outside
+ * @chip_info: our ha struct.
+ */
+static void  pm8001_post_sas_ha_init(struct Scsi_Host *shost,
+				     const struct pm8001_chip_info *chip_info)
+{
+	int i = 0;
+	struct pm8001_hba_info *pm8001_ha;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+	pm8001_ha = sha->lldd_ha;
+	for (i = 0; i < chip_info->n_phy; i++) {
+		sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
+		sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
+	}
+	sha->sas_ha_name = DRV_NAME;
+	sha->dev = pm8001_ha->dev;
+
+	sha->lldd_module = THIS_MODULE;
+	sha->sas_addr = &pm8001_ha->sas_addr[0];
+	sha->num_phys = chip_info->n_phy;
+	sha->core.shost = shost;
+}
+
+/**
+ * pm8001_init_sas_add - initialize sas address
+ * @chip_info: our ha struct.
+ *
+ * Currently we just set the fixed SAS address to our HBA,for manufacture,
+ * it should read from the EEPROM
+ */
+static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
+{
+	u8 i, j;
+#ifdef PM8001_READ_VPD
+	/* For new SPC controllers WWN is stored in flash vpd
+	*  For SPC/SPCve controllers WWN is stored in EEPROM
+	*  For Older SPC WWN is stored in NVMD
+	*/
+	DECLARE_COMPLETION_ONSTACK(completion);
+	struct pm8001_ioctl_payload payload;
+	u16 deviceid;
+	int rc;
+
+	pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
+	pm8001_ha->nvmd_completion = &completion;
+
+	if (pm8001_ha->chip_id == chip_8001) {
+		if (deviceid == 0x8081 || deviceid == 0x0042) {
+			payload.minor_function = 4;
+			payload.length = 4096;
+		} else {
+			payload.minor_function = 0;
+			payload.length = 128;
+		}
+	} else {
+		payload.minor_function = 1;
+		payload.length = 4096;
+	}
+	payload.offset = 0;
+	payload.func_specific = kzalloc(payload.length, GFP_KERNEL);
+	if (!payload.func_specific) {
+		PM8001_INIT_DBG(pm8001_ha, pm8001_printk("mem alloc fail\n"));
+		return;
+	}
+	rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
+	if (rc) {
+		kfree(payload.func_specific);
+		PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
+		return;
+	}
+	wait_for_completion(&completion);
+
+	for (i = 0, j = 0; i <= 7; i++, j++) {
+		if (pm8001_ha->chip_id == chip_8001) {
+			if (deviceid == 0x8081)
+				pm8001_ha->sas_addr[j] =
+					payload.func_specific[0x704 + i];
+			else if (deviceid == 0x0042)
+				pm8001_ha->sas_addr[j] =
+					payload.func_specific[0x010 + i];
+		} else
+			pm8001_ha->sas_addr[j] =
+					payload.func_specific[0x804 + i];
+	}
+
+	for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+		memcpy(&pm8001_ha->phy[i].dev_sas_addr,
+			pm8001_ha->sas_addr, SAS_ADDR_SIZE);
+		PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("phy %d sas_addr = %016llx\n", i,
+			pm8001_ha->phy[i].dev_sas_addr));
+	}
+	kfree(payload.func_specific);
+#else
+	for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+		pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
+		pm8001_ha->phy[i].dev_sas_addr =
+			cpu_to_be64((u64)
+				(*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
+	}
+	memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
+		SAS_ADDR_SIZE);
+#endif
+}
+
+/*
+ * pm8001_get_phy_settings_info : Read phy setting values.
+ * @pm8001_ha : our hba.
+ */
+static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
+{
+
+#ifdef PM8001_READ_VPD
+	/*OPTION ROM FLASH read for the SPC cards */
+	DECLARE_COMPLETION_ONSTACK(completion);
+	struct pm8001_ioctl_payload payload;
+	int rc;
+
+	pm8001_ha->nvmd_completion = &completion;
+	/* SAS ADDRESS read from flash / EEPROM */
+	payload.minor_function = 6;
+	payload.offset = 0;
+	payload.length = 4096;
+	payload.func_specific = kzalloc(4096, GFP_KERNEL);
+	if (!payload.func_specific)
+		return -ENOMEM;
+	/* Read phy setting values from flash */
+	rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
+	if (rc) {
+		kfree(payload.func_specific);
+		PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
+		return -ENOMEM;
+	}
+	wait_for_completion(&completion);
+	pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
+	kfree(payload.func_specific);
+#endif
+	return 0;
+}
+
+#ifdef PM8001_USE_MSIX
+/**
+ * pm8001_setup_msix - enable MSI-X interrupt
+ * @chip_info: our ha struct.
+ * @irq_handler: irq_handler
+ */
+static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 i = 0, j = 0;
+	u32 number_of_intr;
+	int flag = 0;
+	u32 max_entry;
+	int rc;
+	static char intr_drvname[PM8001_MAX_MSIX_VEC][sizeof(DRV_NAME)+3];
+
+	/* SPCv controllers supports 64 msi-x */
+	if (pm8001_ha->chip_id == chip_8001) {
+		number_of_intr = 1;
+	} else {
+		number_of_intr = PM8001_MAX_MSIX_VEC;
+		flag &= ~IRQF_SHARED;
+	}
+
+	max_entry = sizeof(pm8001_ha->msix_entries) /
+		sizeof(pm8001_ha->msix_entries[0]);
+	for (i = 0; i < max_entry ; i++)
+		pm8001_ha->msix_entries[i].entry = i;
+	rc = pci_enable_msix_exact(pm8001_ha->pdev, pm8001_ha->msix_entries,
+		number_of_intr);
+	pm8001_ha->number_of_intr = number_of_intr;
+	if (rc)
+		return rc;
+
+	PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+		"pci_enable_msix_exact request ret:%d no of intr %d\n",
+				rc, pm8001_ha->number_of_intr));
+
+	for (i = 0; i < number_of_intr; i++) {
+		snprintf(intr_drvname[i], sizeof(intr_drvname[0]),
+				DRV_NAME"%d", i);
+		pm8001_ha->irq_vector[i].irq_id = i;
+		pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
+
+		rc = request_irq(pm8001_ha->msix_entries[i].vector,
+			pm8001_interrupt_handler_msix, flag,
+			intr_drvname[i], &(pm8001_ha->irq_vector[i]));
+		if (rc) {
+			for (j = 0; j < i; j++) {
+				free_irq(pm8001_ha->msix_entries[j].vector,
+					&(pm8001_ha->irq_vector[i]));
+			}
+			pci_disable_msix(pm8001_ha->pdev);
+			break;
+		}
+	}
+
+	return rc;
+}
+#endif
+
+/**
+ * pm8001_request_irq - register interrupt
+ * @chip_info: our ha struct.
+ */
+static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
+{
+	struct pci_dev *pdev;
+	int rc;
+
+	pdev = pm8001_ha->pdev;
+
+#ifdef PM8001_USE_MSIX
+	if (pdev->msix_cap)
+		return pm8001_setup_msix(pm8001_ha);
+	else {
+		PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("MSIX not supported!!!\n"));
+		goto intx;
+	}
+#endif
+
+intx:
+	/* initialize the INT-X interrupt */
+	rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
+		DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost));
+	return rc;
+}
+
+/**
+ * pm8001_pci_probe - probe supported device
+ * @pdev: pci device which kernel has been prepared for.
+ * @ent: pci device id
+ *
+ * This function is the main initialization function, when register a new
+ * pci driver it is invoked, all struct an hardware initilization should be done
+ * here, also, register interrupt
+ */
+static int pm8001_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *ent)
+{
+	unsigned int rc;
+	u32	pci_reg;
+	u8	i = 0;
+	struct pm8001_hba_info *pm8001_ha;
+	struct Scsi_Host *shost = NULL;
+	const struct pm8001_chip_info *chip;
+
+	dev_printk(KERN_INFO, &pdev->dev,
+		"pm80xx: driver version %s\n", DRV_VERSION);
+	rc = pci_enable_device(pdev);
+	if (rc)
+		goto err_out_enable;
+	pci_set_master(pdev);
+	/*
+	 * Enable pci slot busmaster by setting pci command register.
+	 * This is required by FW for Cyclone card.
+	 */
+
+	pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
+	pci_reg |= 0x157;
+	pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc)
+		goto err_out_disable;
+	rc = pci_go_44(pdev);
+	if (rc)
+		goto err_out_regions;
+
+	shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
+	if (!shost) {
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+	chip = &pm8001_chips[ent->driver_data];
+	SHOST_TO_SAS_HA(shost) =
+		kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
+	if (!SHOST_TO_SAS_HA(shost)) {
+		rc = -ENOMEM;
+		goto err_out_free_host;
+	}
+
+	rc = pm8001_prep_sas_ha_init(shost, chip);
+	if (rc) {
+		rc = -ENOMEM;
+		goto err_out_free;
+	}
+	pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
+	/* ent->driver variable is used to differentiate between controllers */
+	pm8001_ha = pm8001_pci_alloc(pdev, ent, shost);
+	if (!pm8001_ha) {
+		rc = -ENOMEM;
+		goto err_out_free;
+	}
+	list_add_tail(&pm8001_ha->list, &hba_list);
+	PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
+	rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
+	if (rc) {
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+			"chip_init failed [ret: %d]\n", rc));
+		goto err_out_ha_free;
+	}
+
+	rc = scsi_add_host(shost, &pdev->dev);
+	if (rc)
+		goto err_out_ha_free;
+	rc = pm8001_request_irq(pm8001_ha);
+	if (rc)	{
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+			"pm8001_request_irq failed [ret: %d]\n", rc));
+		goto err_out_shost;
+	}
+
+	PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
+	if (pm8001_ha->chip_id != chip_8001) {
+		for (i = 1; i < pm8001_ha->number_of_intr; i++)
+			PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
+		/* setup thermal configuration. */
+		pm80xx_set_thermal_config(pm8001_ha);
+	}
+
+	pm8001_init_sas_add(pm8001_ha);
+	/* phy setting support for motherboard controller */
+	if (pdev->subsystem_vendor != PCI_VENDOR_ID_ADAPTEC2 &&
+		pdev->subsystem_vendor != 0) {
+		rc = pm8001_get_phy_settings_info(pm8001_ha);
+		if (rc)
+			goto err_out_shost;
+	}
+	pm8001_post_sas_ha_init(shost, chip);
+	rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
+	if (rc)
+		goto err_out_shost;
+	scsi_scan_host(pm8001_ha->shost);
+	return 0;
+
+err_out_shost:
+	scsi_remove_host(pm8001_ha->shost);
+err_out_ha_free:
+	pm8001_free(pm8001_ha);
+err_out_free:
+	kfree(SHOST_TO_SAS_HA(shost));
+err_out_free_host:
+	kfree(shost);
+err_out_regions:
+	pci_release_regions(pdev);
+err_out_disable:
+	pci_disable_device(pdev);
+err_out_enable:
+	return rc;
+}
+
+static void pm8001_pci_remove(struct pci_dev *pdev)
+{
+	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+	struct pm8001_hba_info *pm8001_ha;
+	int i, j;
+	pm8001_ha = sha->lldd_ha;
+	sas_unregister_ha(sha);
+	sas_remove_host(pm8001_ha->shost);
+	list_del(&pm8001_ha->list);
+	scsi_remove_host(pm8001_ha->shost);
+	PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
+	PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
+
+#ifdef PM8001_USE_MSIX
+	for (i = 0; i < pm8001_ha->number_of_intr; i++)
+		synchronize_irq(pm8001_ha->msix_entries[i].vector);
+	for (i = 0; i < pm8001_ha->number_of_intr; i++)
+		free_irq(pm8001_ha->msix_entries[i].vector,
+				&(pm8001_ha->irq_vector[i]));
+	pci_disable_msix(pdev);
+#else
+	free_irq(pm8001_ha->irq, sha);
+#endif
+#ifdef PM8001_USE_TASKLET
+	/* For non-msix and msix interrupts */
+	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+		tasklet_kill(&pm8001_ha->tasklet[0]);
+	else
+		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+			tasklet_kill(&pm8001_ha->tasklet[j]);
+#endif
+	pm8001_free(pm8001_ha);
+	kfree(sha->sas_phy);
+	kfree(sha->sas_port);
+	kfree(sha);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+/**
+ * pm8001_pci_suspend - power management suspend main entry point
+ * @pdev: PCI device struct
+ * @state: PM state change to (usually PCI_D3)
+ *
+ * Returns 0 success, anything else error.
+ */
+static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+	struct pm8001_hba_info *pm8001_ha;
+	int  i, j;
+	u32 device_state;
+	pm8001_ha = sha->lldd_ha;
+	sas_suspend_ha(sha);
+	flush_workqueue(pm8001_wq);
+	scsi_block_requests(pm8001_ha->shost);
+	if (!pdev->pm_cap) {
+		dev_err(&pdev->dev, " PCI PM not supported\n");
+		return -ENODEV;
+	}
+	PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
+	PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
+#ifdef PM8001_USE_MSIX
+	for (i = 0; i < pm8001_ha->number_of_intr; i++)
+		synchronize_irq(pm8001_ha->msix_entries[i].vector);
+	for (i = 0; i < pm8001_ha->number_of_intr; i++)
+		free_irq(pm8001_ha->msix_entries[i].vector,
+				&(pm8001_ha->irq_vector[i]));
+	pci_disable_msix(pdev);
+#else
+	free_irq(pm8001_ha->irq, sha);
+#endif
+#ifdef PM8001_USE_TASKLET
+	/* For non-msix and msix interrupts */
+	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+		tasklet_kill(&pm8001_ha->tasklet[0]);
+	else
+		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+			tasklet_kill(&pm8001_ha->tasklet[j]);
+#endif
+	device_state = pci_choose_state(pdev, state);
+	pm8001_printk("pdev=0x%p, slot=%s, entering "
+		      "operating state [D%d]\n", pdev,
+		      pm8001_ha->name, device_state);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, device_state);
+	return 0;
+}
+
+/**
+ * pm8001_pci_resume - power management resume main entry point
+ * @pdev: PCI device struct
+ *
+ * Returns 0 success, anything else error.
+ */
+static int pm8001_pci_resume(struct pci_dev *pdev)
+{
+	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+	struct pm8001_hba_info *pm8001_ha;
+	int rc;
+	u8 i = 0, j;
+	u32 device_state;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	pm8001_ha = sha->lldd_ha;
+	device_state = pdev->current_state;
+
+	pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
+		"operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_enable_wake(pdev, PCI_D0, 0);
+	pci_restore_state(pdev);
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		pm8001_printk("slot=%s Enable device failed during resume\n",
+			      pm8001_ha->name);
+		goto err_out_enable;
+	}
+
+	pci_set_master(pdev);
+	rc = pci_go_44(pdev);
+	if (rc)
+		goto err_out_disable;
+	sas_prep_resume_ha(sha);
+	/* chip soft rst only for spc */
+	if (pm8001_ha->chip_id == chip_8001) {
+		PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
+		PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("chip soft reset successful\n"));
+	}
+	rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
+	if (rc)
+		goto err_out_disable;
+
+	/* disable all the interrupt bits */
+	PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
+
+	rc = pm8001_request_irq(pm8001_ha);
+	if (rc)
+		goto err_out_disable;
+#ifdef PM8001_USE_TASKLET
+	/*  Tasklet for non msi-x interrupt handler */
+	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+		tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
+			(unsigned long)&(pm8001_ha->irq_vector[0]));
+	else
+		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+			tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
+				(unsigned long)&(pm8001_ha->irq_vector[j]));
+#endif
+	PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
+	if (pm8001_ha->chip_id != chip_8001) {
+		for (i = 1; i < pm8001_ha->number_of_intr; i++)
+			PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
+	}
+	pm8001_ha->flags = PM8001F_RUN_TIME;
+	for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+		pm8001_ha->phy[i].enable_completion = &completion;
+		PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
+		wait_for_completion(&completion);
+	}
+	sas_resume_ha(sha);
+	return 0;
+
+err_out_disable:
+	scsi_remove_host(pm8001_ha->shost);
+	pci_disable_device(pdev);
+err_out_enable:
+	return rc;
+}
+
+/* update of pci device, vendor id and driver data with
+ * unique value for each of the controller
+ */
+static struct pci_device_id pm8001_pci_table[] = {
+	{ PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
+	{ PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
+	/* Support for SPC/SPCv/SPCve controllers */
+	{ PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
+	{ PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 },
+	{ PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 },
+	{ PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 },
+	{ PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 },
+	{ PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 },
+	{ PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
+	{ PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
+	{ PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
+	{ PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 },
+	{ PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 },
+	{ PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 },
+	{ PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 },
+	{ PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 },
+	{ PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8081,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8081,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+		PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+		PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+		PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+		PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
+	{} /* terminate list */
+};
+
+static struct pci_driver pm8001_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= pm8001_pci_table,
+	.probe		= pm8001_pci_probe,
+	.remove		= pm8001_pci_remove,
+	.suspend	= pm8001_pci_suspend,
+	.resume		= pm8001_pci_resume,
+};
+
+/**
+ *	pm8001_init - initialize scsi transport template
+ */
+static int __init pm8001_init(void)
+{
+	int rc = -ENOMEM;
+
+	pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
+	if (!pm8001_wq)
+		goto err;
+
+	pm8001_id = 0;
+	pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
+	if (!pm8001_stt)
+		goto err_wq;
+	rc = pci_register_driver(&pm8001_pci_driver);
+	if (rc)
+		goto err_tp;
+	return 0;
+
+err_tp:
+	sas_release_transport(pm8001_stt);
+err_wq:
+	destroy_workqueue(pm8001_wq);
+err:
+	return rc;
+}
+
+static void __exit pm8001_exit(void)
+{
+	pci_unregister_driver(&pm8001_pci_driver);
+	sas_release_transport(pm8001_stt);
+	destroy_workqueue(pm8001_wq);
+}
+
+module_init(pm8001_init);
+module_exit(pm8001_exit);
+
+MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
+MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
+MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
+MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
+MODULE_DESCRIPTION(
+		"PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 "
+		"SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
+
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
new file mode 100644
index 000000000..b93f289b4
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -0,0 +1,1258 @@
+/*
+ * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include <linux/slab.h>
+#include "pm8001_sas.h"
+
+/**
+ * pm8001_find_tag - from sas task to find out  tag that belongs to this task
+ * @task: the task sent to the LLDD
+ * @tag: the found tag associated with the task
+ */
+static int pm8001_find_tag(struct sas_task *task, u32 *tag)
+{
+	if (task->lldd_task) {
+		struct pm8001_ccb_info *ccb;
+		ccb = task->lldd_task;
+		*tag = ccb->ccb_tag;
+		return 1;
+	}
+	return 0;
+}
+
+/**
+  * pm8001_tag_free - free the no more needed tag
+  * @pm8001_ha: our hba struct
+  * @tag: the found tag associated with the task
+  */
+void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
+{
+	void *bitmap = pm8001_ha->tags;
+	clear_bit(tag, bitmap);
+}
+
+/**
+  * pm8001_tag_alloc - allocate a empty tag for task used.
+  * @pm8001_ha: our hba struct
+  * @tag_out: the found empty tag .
+  */
+inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
+{
+	unsigned int tag;
+	void *bitmap = pm8001_ha->tags;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags);
+	tag = find_first_zero_bit(bitmap, pm8001_ha->tags_num);
+	if (tag >= pm8001_ha->tags_num) {
+		spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
+		return -SAS_QUEUE_FULL;
+	}
+	set_bit(tag, bitmap);
+	spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
+	*tag_out = tag;
+	return 0;
+}
+
+void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
+{
+	int i;
+	for (i = 0; i < pm8001_ha->tags_num; ++i)
+		pm8001_tag_free(pm8001_ha, i);
+}
+
+ /**
+  * pm8001_mem_alloc - allocate memory for pm8001.
+  * @pdev: pci device.
+  * @virt_addr: the allocated virtual address
+  * @pphys_addr_hi: the physical address high byte address.
+  * @pphys_addr_lo: the physical address low byte address.
+  * @mem_size: memory size.
+  */
+int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
+	dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
+	u32 *pphys_addr_lo, u32 mem_size, u32 align)
+{
+	caddr_t mem_virt_alloc;
+	dma_addr_t mem_dma_handle;
+	u64 phys_align;
+	u64 align_offset = 0;
+	if (align)
+		align_offset = (dma_addr_t)align - 1;
+	mem_virt_alloc = pci_zalloc_consistent(pdev, mem_size + align,
+					       &mem_dma_handle);
+	if (!mem_virt_alloc) {
+		pm8001_printk("memory allocation error\n");
+		return -1;
+	}
+	*pphys_addr = mem_dma_handle;
+	phys_align = (*pphys_addr + align_offset) & ~align_offset;
+	*virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
+	*pphys_addr_hi = upper_32_bits(phys_align);
+	*pphys_addr_lo = lower_32_bits(phys_align);
+	return 0;
+}
+/**
+  * pm8001_find_ha_by_dev - from domain device which come from sas layer to
+  * find out our hba struct.
+  * @dev: the domain device which from sas layer.
+  */
+static
+struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
+{
+	struct sas_ha_struct *sha = dev->port->ha;
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	return pm8001_ha;
+}
+
+/**
+  * pm8001_phy_control - this function should be registered to
+  * sas_domain_function_template to provide libsas used, note: this is just
+  * control the HBA phy rather than other expander phy if you want control
+  * other phy, you should use SMP command.
+  * @sas_phy: which phy in HBA phys.
+  * @func: the operation.
+  * @funcdata: always NULL.
+  */
+int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+	void *funcdata)
+{
+	int rc = 0, phy_id = sas_phy->id;
+	struct pm8001_hba_info *pm8001_ha = NULL;
+	struct sas_phy_linkrates *rates;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	unsigned long flags;
+	pm8001_ha = sas_phy->ha->lldd_ha;
+	pm8001_ha->phy[phy_id].enable_completion = &completion;
+	switch (func) {
+	case PHY_FUNC_SET_LINK_RATE:
+		rates = funcdata;
+		if (rates->minimum_linkrate) {
+			pm8001_ha->phy[phy_id].minimum_linkrate =
+				rates->minimum_linkrate;
+		}
+		if (rates->maximum_linkrate) {
+			pm8001_ha->phy[phy_id].maximum_linkrate =
+				rates->maximum_linkrate;
+		}
+		if (pm8001_ha->phy[phy_id].phy_state == 0) {
+			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+			wait_for_completion(&completion);
+		}
+		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+					      PHY_LINK_RESET);
+		break;
+	case PHY_FUNC_HARD_RESET:
+		if (pm8001_ha->phy[phy_id].phy_state == 0) {
+			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+			wait_for_completion(&completion);
+		}
+		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+					      PHY_HARD_RESET);
+		break;
+	case PHY_FUNC_LINK_RESET:
+		if (pm8001_ha->phy[phy_id].phy_state == 0) {
+			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+			wait_for_completion(&completion);
+		}
+		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+					      PHY_LINK_RESET);
+		break;
+	case PHY_FUNC_RELEASE_SPINUP_HOLD:
+		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+					      PHY_LINK_RESET);
+		break;
+	case PHY_FUNC_DISABLE:
+		PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
+		break;
+	case PHY_FUNC_GET_EVENTS:
+		spin_lock_irqsave(&pm8001_ha->lock, flags);
+		if (pm8001_ha->chip_id == chip_8001) {
+			if (-1 == pm8001_bar4_shift(pm8001_ha,
+					(phy_id < 4) ? 0x30000 : 0x40000)) {
+				spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+				return -EINVAL;
+			}
+		}
+		{
+			struct sas_phy *phy = sas_phy->phy;
+			uint32_t *qp = (uint32_t *)(((char *)
+				pm8001_ha->io_mem[2].memvirtaddr)
+				+ 0x1034 + (0x4000 * (phy_id & 3)));
+
+			phy->invalid_dword_count = qp[0];
+			phy->running_disparity_error_count = qp[1];
+			phy->loss_of_dword_sync_count = qp[3];
+			phy->phy_reset_problem_count = qp[4];
+		}
+		if (pm8001_ha->chip_id == chip_8001)
+			pm8001_bar4_shift(pm8001_ha, 0);
+		spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+		return 0;
+	default:
+		rc = -EOPNOTSUPP;
+	}
+	msleep(300);
+	return rc;
+}
+
+/**
+  * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
+  * command to HBA.
+  * @shost: the scsi host data.
+  */
+void pm8001_scan_start(struct Scsi_Host *shost)
+{
+	int i;
+	struct pm8001_hba_info *pm8001_ha;
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	pm8001_ha = sha->lldd_ha;
+	/* SAS_RE_INITIALIZATION not available in SPCv/ve */
+	if (pm8001_ha->chip_id == chip_8001)
+		PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
+	for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
+		PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
+}
+
+int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+	struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+
+	/* give the phy enabling interrupt event time to come in (1s
+	* is empirically about all it takes) */
+	if (time < HZ)
+		return 0;
+	/* Wait for discovery to finish */
+	sas_drain_work(ha);
+	return 1;
+}
+
+/**
+  * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
+  * @pm8001_ha: our hba card information
+  * @ccb: the ccb which attached to smp task
+  */
+static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_ccb_info *ccb)
+{
+	return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
+}
+
+u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
+{
+	struct ata_queued_cmd *qc = task->uldd_task;
+	if (qc) {
+		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+			qc->tf.command == ATA_CMD_FPDMA_READ) {
+			*tag = qc->tag;
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/**
+  * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
+  * @pm8001_ha: our hba card information
+  * @ccb: the ccb which attached to sata task
+  */
+static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_ccb_info *ccb)
+{
+	return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
+}
+
+/**
+  * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
+  * @pm8001_ha: our hba card information
+  * @ccb: the ccb which attached to TM
+  * @tmf: the task management IU
+  */
+static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
+{
+	return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
+}
+
+/**
+  * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
+  * @pm8001_ha: our hba card information
+  * @ccb: the ccb which attached to ssp task
+  */
+static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_ccb_info *ccb)
+{
+	return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
+}
+
+ /* Find the local port id that's attached to this device */
+static int sas_find_local_port_id(struct domain_device *dev)
+{
+	struct domain_device *pdev = dev->parent;
+
+	/* Directly attached device */
+	if (!pdev)
+		return dev->port->id;
+	while (pdev) {
+		struct domain_device *pdev_p = pdev->parent;
+		if (!pdev_p)
+			return pdev->port->id;
+		pdev = pdev->parent;
+	}
+	return 0;
+}
+
+/**
+  * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
+  * @task: the task to be execute.
+  * @num: if can_queue great than 1, the task can be queued up. for SMP task,
+  * we always execute one one time.
+  * @gfp_flags: gfp_flags.
+  * @is_tmf: if it is task management task.
+  * @tmf: the task management IU
+  */
+#define DEV_IS_GONE(pm8001_dev)	\
+	((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
+static int pm8001_task_exec(struct sas_task *task,
+	gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
+{
+	struct domain_device *dev = task->dev;
+	struct pm8001_hba_info *pm8001_ha;
+	struct pm8001_device *pm8001_dev;
+	struct pm8001_port *port = NULL;
+	struct sas_task *t = task;
+	struct pm8001_ccb_info *ccb;
+	u32 tag = 0xdeadbeef, rc, n_elem = 0;
+	unsigned long flags = 0;
+
+	if (!dev->port) {
+		struct task_status_struct *tsm = &t->task_status;
+		tsm->resp = SAS_TASK_UNDELIVERED;
+		tsm->stat = SAS_PHY_DOWN;
+		if (dev->dev_type != SAS_SATA_DEV)
+			t->task_done(t);
+		return 0;
+	}
+	pm8001_ha = pm8001_find_ha_by_dev(task->dev);
+	PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
+	spin_lock_irqsave(&pm8001_ha->lock, flags);
+	do {
+		dev = t->dev;
+		pm8001_dev = dev->lldd_dev;
+		port = &pm8001_ha->port[sas_find_local_port_id(dev)];
+		if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) {
+			if (sas_protocol_ata(t->task_proto)) {
+				struct task_status_struct *ts = &t->task_status;
+				ts->resp = SAS_TASK_UNDELIVERED;
+				ts->stat = SAS_PHY_DOWN;
+
+				spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+				t->task_done(t);
+				spin_lock_irqsave(&pm8001_ha->lock, flags);
+				continue;
+			} else {
+				struct task_status_struct *ts = &t->task_status;
+				ts->resp = SAS_TASK_UNDELIVERED;
+				ts->stat = SAS_PHY_DOWN;
+				t->task_done(t);
+				continue;
+			}
+		}
+		rc = pm8001_tag_alloc(pm8001_ha, &tag);
+		if (rc)
+			goto err_out;
+		ccb = &pm8001_ha->ccb_info[tag];
+
+		if (!sas_protocol_ata(t->task_proto)) {
+			if (t->num_scatter) {
+				n_elem = dma_map_sg(pm8001_ha->dev,
+					t->scatter,
+					t->num_scatter,
+					t->data_dir);
+				if (!n_elem) {
+					rc = -ENOMEM;
+					goto err_out_tag;
+				}
+			}
+		} else {
+			n_elem = t->num_scatter;
+		}
+
+		t->lldd_task = ccb;
+		ccb->n_elem = n_elem;
+		ccb->ccb_tag = tag;
+		ccb->task = t;
+		ccb->device = pm8001_dev;
+		switch (t->task_proto) {
+		case SAS_PROTOCOL_SMP:
+			rc = pm8001_task_prep_smp(pm8001_ha, ccb);
+			break;
+		case SAS_PROTOCOL_SSP:
+			if (is_tmf)
+				rc = pm8001_task_prep_ssp_tm(pm8001_ha,
+					ccb, tmf);
+			else
+				rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
+			break;
+		case SAS_PROTOCOL_SATA:
+		case SAS_PROTOCOL_STP:
+			rc = pm8001_task_prep_ata(pm8001_ha, ccb);
+			break;
+		default:
+			dev_printk(KERN_ERR, pm8001_ha->dev,
+				"unknown sas_task proto: 0x%x\n",
+				t->task_proto);
+			rc = -EINVAL;
+			break;
+		}
+
+		if (rc) {
+			PM8001_IO_DBG(pm8001_ha,
+				pm8001_printk("rc is %x\n", rc));
+			goto err_out_tag;
+		}
+		/* TODO: select normal or high priority */
+		spin_lock(&t->task_state_lock);
+		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
+		spin_unlock(&t->task_state_lock);
+		pm8001_dev->running_req++;
+	} while (0);
+	rc = 0;
+	goto out_done;
+
+err_out_tag:
+	pm8001_tag_free(pm8001_ha, tag);
+err_out:
+	dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
+	if (!sas_protocol_ata(t->task_proto))
+		if (n_elem)
+			dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
+				t->data_dir);
+out_done:
+	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+	return rc;
+}
+
+/**
+  * pm8001_queue_command - register for upper layer used, all IO commands sent
+  * to HBA are from this interface.
+  * @task: the task to be execute.
+  * @gfp_flags: gfp_flags
+  */
+int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags)
+{
+	return pm8001_task_exec(task, gfp_flags, 0, NULL);
+}
+
+/**
+  * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
+  * @pm8001_ha: our hba card information
+  * @ccb: the ccb which attached to ssp task
+  * @task: the task to be free.
+  * @ccb_idx: ccb index.
+  */
+void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
+	struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx)
+{
+	if (!ccb->task)
+		return;
+	if (!sas_protocol_ata(task->task_proto))
+		if (ccb->n_elem)
+			dma_unmap_sg(pm8001_ha->dev, task->scatter,
+				task->num_scatter, task->data_dir);
+
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SMP:
+		dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
+			PCI_DMA_FROMDEVICE);
+		dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
+			PCI_DMA_TODEVICE);
+		break;
+
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SSP:
+	default:
+		/* do nothing */
+		break;
+	}
+	task->lldd_task = NULL;
+	ccb->task = NULL;
+	ccb->ccb_tag = 0xFFFFFFFF;
+	ccb->open_retry = 0;
+	pm8001_tag_free(pm8001_ha, ccb_idx);
+}
+
+ /**
+  * pm8001_alloc_dev - find a empty pm8001_device
+  * @pm8001_ha: our hba card information
+  */
+struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 dev;
+	for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
+		if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
+			pm8001_ha->devices[dev].id = dev;
+			return &pm8001_ha->devices[dev];
+		}
+	}
+	if (dev == PM8001_MAX_DEVICES) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("max support %d devices, ignore ..\n",
+			PM8001_MAX_DEVICES));
+	}
+	return NULL;
+}
+/**
+  * pm8001_find_dev - find a matching pm8001_device
+  * @pm8001_ha: our hba card information
+  */
+struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
+					u32 device_id)
+{
+	u32 dev;
+	for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
+		if (pm8001_ha->devices[dev].device_id == device_id)
+			return &pm8001_ha->devices[dev];
+	}
+	if (dev == PM8001_MAX_DEVICES) {
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("NO MATCHING "
+				"DEVICE FOUND !!!\n"));
+	}
+	return NULL;
+}
+
+static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
+{
+	u32 id = pm8001_dev->id;
+	memset(pm8001_dev, 0, sizeof(*pm8001_dev));
+	pm8001_dev->id = id;
+	pm8001_dev->dev_type = SAS_PHY_UNUSED;
+	pm8001_dev->device_id = PM8001_MAX_DEVICES;
+	pm8001_dev->sas_device = NULL;
+}
+
+/**
+  * pm8001_dev_found_notify - libsas notify a device is found.
+  * @dev: the device structure which sas layer used.
+  *
+  * when libsas find a sas domain device, it should tell the LLDD that
+  * device is found, and then LLDD register this device to HBA firmware
+  * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
+  * device ID(according to device's sas address) and returned it to LLDD. From
+  * now on, we communicate with HBA FW with the device ID which HBA assigned
+  * rather than sas address. it is the necessary step for our HBA but it is
+  * the optional for other HBA driver.
+  */
+static int pm8001_dev_found_notify(struct domain_device *dev)
+{
+	unsigned long flags = 0;
+	int res = 0;
+	struct pm8001_hba_info *pm8001_ha = NULL;
+	struct domain_device *parent_dev = dev->parent;
+	struct pm8001_device *pm8001_device;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	u32 flag = 0;
+	pm8001_ha = pm8001_find_ha_by_dev(dev);
+	spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+	pm8001_device = pm8001_alloc_dev(pm8001_ha);
+	if (!pm8001_device) {
+		res = -1;
+		goto found_out;
+	}
+	pm8001_device->sas_device = dev;
+	dev->lldd_dev = pm8001_device;
+	pm8001_device->dev_type = dev->dev_type;
+	pm8001_device->dcompletion = &completion;
+	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
+		int phy_id;
+		struct ex_phy *phy;
+		for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
+		phy_id++) {
+			phy = &parent_dev->ex_dev.ex_phy[phy_id];
+			if (SAS_ADDR(phy->attached_sas_addr)
+				== SAS_ADDR(dev->sas_addr)) {
+				pm8001_device->attached_phy = phy_id;
+				break;
+			}
+		}
+		if (phy_id == parent_dev->ex_dev.num_phys) {
+			PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Error: no attached dev:%016llx"
+			" at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
+				SAS_ADDR(parent_dev->sas_addr)));
+			res = -1;
+		}
+	} else {
+		if (dev->dev_type == SAS_SATA_DEV) {
+			pm8001_device->attached_phy =
+				dev->rphy->identify.phy_identifier;
+				flag = 1; /* directly sata*/
+		}
+	} /*register this device to HBA*/
+	PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
+	PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
+	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+	wait_for_completion(&completion);
+	if (dev->dev_type == SAS_END_DEVICE)
+		msleep(50);
+	pm8001_ha->flags = PM8001F_RUN_TIME;
+	return 0;
+found_out:
+	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+	return res;
+}
+
+int pm8001_dev_found(struct domain_device *dev)
+{
+	return pm8001_dev_found_notify(dev);
+}
+
+void pm8001_task_done(struct sas_task *task)
+{
+	if (!del_timer(&task->slow_task->timer))
+		return;
+	complete(&task->slow_task->completion);
+}
+
+static void pm8001_tmf_timedout(unsigned long data)
+{
+	struct sas_task *task = (struct sas_task *)data;
+
+	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+	complete(&task->slow_task->completion);
+}
+
+#define PM8001_TASK_TIMEOUT 20
+/**
+  * pm8001_exec_internal_tmf_task - execute some task management commands.
+  * @dev: the wanted device.
+  * @tmf: which task management wanted to be take.
+  * @para_len: para_len.
+  * @parameter: ssp task parameter.
+  *
+  * when errors or exception happened, we may want to do something, for example
+  * abort the issued task which result in this execption, it is done by calling
+  * this function, note it is also with the task execute interface.
+  */
+static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
+	void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
+{
+	int res, retry;
+	struct sas_task *task = NULL;
+	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+	struct pm8001_device *pm8001_dev = dev->lldd_dev;
+	DECLARE_COMPLETION_ONSTACK(completion_setstate);
+
+	for (retry = 0; retry < 3; retry++) {
+		task = sas_alloc_slow_task(GFP_KERNEL);
+		if (!task)
+			return -ENOMEM;
+
+		task->dev = dev;
+		task->task_proto = dev->tproto;
+		memcpy(&task->ssp_task, parameter, para_len);
+		task->task_done = pm8001_task_done;
+		task->slow_task->timer.data = (unsigned long)task;
+		task->slow_task->timer.function = pm8001_tmf_timedout;
+		task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
+		add_timer(&task->slow_task->timer);
+
+		res = pm8001_task_exec(task, GFP_KERNEL, 1, tmf);
+
+		if (res) {
+			del_timer(&task->slow_task->timer);
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("Executing internal task "
+				"failed\n"));
+			goto ex_err;
+		}
+		wait_for_completion(&task->slow_task->completion);
+		if (pm8001_ha->chip_id != chip_8001) {
+			pm8001_dev->setds_completion = &completion_setstate;
+				PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+					pm8001_dev, 0x01);
+			wait_for_completion(&completion_setstate);
+		}
+		res = -TMF_RESP_FUNC_FAILED;
+		/* Even TMF timed out, return direct. */
+		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+				PM8001_FAIL_DBG(pm8001_ha,
+					pm8001_printk("TMF task[%x]timeout.\n",
+					tmf->tmf));
+				goto ex_err;
+			}
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+			task->task_status.stat == SAM_STAT_GOOD) {
+			res = TMF_RESP_FUNC_COMPLETE;
+			break;
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+		task->task_status.stat == SAS_DATA_UNDERRUN) {
+			/* no error, but return the number of bytes of
+			* underrun */
+			res = task->task_status.residual;
+			break;
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+			task->task_status.stat == SAS_DATA_OVERRUN) {
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("Blocked task error.\n"));
+			res = -EMSGSIZE;
+			break;
+		} else {
+			PM8001_EH_DBG(pm8001_ha,
+				pm8001_printk(" Task to dev %016llx response:"
+				"0x%x status 0x%x\n",
+				SAS_ADDR(dev->sas_addr),
+				task->task_status.resp,
+				task->task_status.stat));
+			sas_free_task(task);
+			task = NULL;
+		}
+	}
+ex_err:
+	BUG_ON(retry == 3 && task != NULL);
+	sas_free_task(task);
+	return res;
+}
+
+static int
+pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag,
+	u32 task_tag)
+{
+	int res, retry;
+	u32 ccb_tag;
+	struct pm8001_ccb_info *ccb;
+	struct sas_task *task = NULL;
+
+	for (retry = 0; retry < 3; retry++) {
+		task = sas_alloc_slow_task(GFP_KERNEL);
+		if (!task)
+			return -ENOMEM;
+
+		task->dev = dev;
+		task->task_proto = dev->tproto;
+		task->task_done = pm8001_task_done;
+		task->slow_task->timer.data = (unsigned long)task;
+		task->slow_task->timer.function = pm8001_tmf_timedout;
+		task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
+		add_timer(&task->slow_task->timer);
+
+		res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+		if (res)
+			return res;
+		ccb = &pm8001_ha->ccb_info[ccb_tag];
+		ccb->device = pm8001_dev;
+		ccb->ccb_tag = ccb_tag;
+		ccb->task = task;
+
+		res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
+			pm8001_dev, flag, task_tag, ccb_tag);
+
+		if (res) {
+			del_timer(&task->slow_task->timer);
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("Executing internal task "
+				"failed\n"));
+			goto ex_err;
+		}
+		wait_for_completion(&task->slow_task->completion);
+		res = TMF_RESP_FUNC_FAILED;
+		/* Even TMF timed out, return direct. */
+		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+				PM8001_FAIL_DBG(pm8001_ha,
+					pm8001_printk("TMF task timeout.\n"));
+				goto ex_err;
+			}
+		}
+
+		if (task->task_status.resp == SAS_TASK_COMPLETE &&
+			task->task_status.stat == SAM_STAT_GOOD) {
+			res = TMF_RESP_FUNC_COMPLETE;
+			break;
+
+		} else {
+			PM8001_EH_DBG(pm8001_ha,
+				pm8001_printk(" Task to dev %016llx response: "
+					"0x%x status 0x%x\n",
+				SAS_ADDR(dev->sas_addr),
+				task->task_status.resp,
+				task->task_status.stat));
+			sas_free_task(task);
+			task = NULL;
+		}
+	}
+ex_err:
+	BUG_ON(retry == 3 && task != NULL);
+	sas_free_task(task);
+	return res;
+}
+
+/**
+  * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
+  * @dev: the device structure which sas layer used.
+  */
+static void pm8001_dev_gone_notify(struct domain_device *dev)
+{
+	unsigned long flags = 0;
+	struct pm8001_hba_info *pm8001_ha;
+	struct pm8001_device *pm8001_dev = dev->lldd_dev;
+
+	pm8001_ha = pm8001_find_ha_by_dev(dev);
+	spin_lock_irqsave(&pm8001_ha->lock, flags);
+	if (pm8001_dev) {
+		u32 device_id = pm8001_dev->device_id;
+
+		PM8001_DISC_DBG(pm8001_ha,
+			pm8001_printk("found dev[%d:%x] is gone.\n",
+			pm8001_dev->device_id, pm8001_dev->dev_type));
+		if (pm8001_dev->running_req) {
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+				dev, 1, 0);
+			spin_lock_irqsave(&pm8001_ha->lock, flags);
+		}
+		PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
+		pm8001_free_dev(pm8001_dev);
+	} else {
+		PM8001_DISC_DBG(pm8001_ha,
+			pm8001_printk("Found dev has gone.\n"));
+	}
+	dev->lldd_dev = NULL;
+	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+}
+
+void pm8001_dev_gone(struct domain_device *dev)
+{
+	pm8001_dev_gone_notify(dev);
+}
+
+static int pm8001_issue_ssp_tmf(struct domain_device *dev,
+	u8 *lun, struct pm8001_tmf_task *tmf)
+{
+	struct sas_ssp_task ssp_task;
+	if (!(dev->tproto & SAS_PROTOCOL_SSP))
+		return TMF_RESP_FUNC_ESUPP;
+
+	strncpy((u8 *)&ssp_task.LUN, lun, 8);
+	return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task),
+		tmf);
+}
+
+/* retry commands by ha, by task and/or by device */
+void pm8001_open_reject_retry(
+	struct pm8001_hba_info *pm8001_ha,
+	struct sas_task *task_to_close,
+	struct pm8001_device *device_to_close)
+{
+	int i;
+	unsigned long flags;
+
+	if (pm8001_ha == NULL)
+		return;
+
+	spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+	for (i = 0; i < PM8001_MAX_CCB; i++) {
+		struct sas_task *task;
+		struct task_status_struct *ts;
+		struct pm8001_device *pm8001_dev;
+		unsigned long flags1;
+		u32 tag;
+		struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
+
+		pm8001_dev = ccb->device;
+		if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
+			continue;
+		if (!device_to_close) {
+			uintptr_t d = (uintptr_t)pm8001_dev
+					- (uintptr_t)&pm8001_ha->devices;
+			if (((d % sizeof(*pm8001_dev)) != 0)
+			 || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES))
+				continue;
+		} else if (pm8001_dev != device_to_close)
+			continue;
+		tag = ccb->ccb_tag;
+		if (!tag || (tag == 0xFFFFFFFF))
+			continue;
+		task = ccb->task;
+		if (!task || !task->task_done)
+			continue;
+		if (task_to_close && (task != task_to_close))
+			continue;
+		ts = &task->task_status;
+		ts->resp = SAS_TASK_COMPLETE;
+		/* Force the midlayer to retry */
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		spin_lock_irqsave(&task->task_state_lock, flags1);
+		task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+		task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+		task->task_state_flags |= SAS_TASK_STATE_DONE;
+		if (unlikely((task->task_state_flags
+				& SAS_TASK_STATE_ABORTED))) {
+			spin_unlock_irqrestore(&task->task_state_lock,
+				flags1);
+			pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+		} else {
+			spin_unlock_irqrestore(&task->task_state_lock,
+				flags1);
+			pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+			mb();/* in order to force CPU ordering */
+			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+			task->task_done(task);
+			spin_lock_irqsave(&pm8001_ha->lock, flags);
+		}
+	}
+
+	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+}
+
+/**
+  * Standard mandates link reset for ATA  (type 0) and hard reset for
+  * SSP (type 1) , only for RECOVERY
+  */
+int pm8001_I_T_nexus_reset(struct domain_device *dev)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct pm8001_device *pm8001_dev;
+	struct pm8001_hba_info *pm8001_ha;
+	struct sas_phy *phy;
+
+	if (!dev || !dev->lldd_dev)
+		return -ENODEV;
+
+	pm8001_dev = dev->lldd_dev;
+	pm8001_ha = pm8001_find_ha_by_dev(dev);
+	phy = sas_get_local_phy(dev);
+
+	if (dev_is_sata(dev)) {
+		DECLARE_COMPLETION_ONSTACK(completion_setstate);
+		if (scsi_is_sas_phy_local(phy)) {
+			rc = 0;
+			goto out;
+		}
+		rc = sas_phy_reset(phy, 1);
+		msleep(2000);
+		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+			dev, 1, 0);
+		pm8001_dev->setds_completion = &completion_setstate;
+		rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+			pm8001_dev, 0x01);
+		wait_for_completion(&completion_setstate);
+	} else {
+		rc = sas_phy_reset(phy, 1);
+		msleep(2000);
+	}
+	PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
+		pm8001_dev->device_id, rc));
+ out:
+	sas_put_local_phy(phy);
+	return rc;
+}
+
+/*
+* This function handle the IT_NEXUS_XXX event or completion
+* status code for SSP/SATA/SMP I/O request.
+*/
+int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct pm8001_device *pm8001_dev;
+	struct pm8001_hba_info *pm8001_ha;
+	struct sas_phy *phy;
+	u32 device_id = 0;
+
+	if (!dev || !dev->lldd_dev)
+		return -1;
+
+	pm8001_dev = dev->lldd_dev;
+	device_id = pm8001_dev->device_id;
+	pm8001_ha = pm8001_find_ha_by_dev(dev);
+
+	PM8001_EH_DBG(pm8001_ha,
+			pm8001_printk("I_T_Nexus handler invoked !!"));
+
+	phy = sas_get_local_phy(dev);
+
+	if (dev_is_sata(dev)) {
+		DECLARE_COMPLETION_ONSTACK(completion_setstate);
+		if (scsi_is_sas_phy_local(phy)) {
+			rc = 0;
+			goto out;
+		}
+		/* send internal ssp/sata/smp abort command to FW */
+		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+							dev, 1, 0);
+		msleep(100);
+
+		/* deregister the target device */
+		pm8001_dev_gone_notify(dev);
+		msleep(200);
+
+		/*send phy reset to hard reset target */
+		rc = sas_phy_reset(phy, 1);
+		msleep(2000);
+		pm8001_dev->setds_completion = &completion_setstate;
+
+		wait_for_completion(&completion_setstate);
+	} else {
+		/* send internal ssp/sata/smp abort command to FW */
+		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+							dev, 1, 0);
+		msleep(100);
+
+		/* deregister the target device */
+		pm8001_dev_gone_notify(dev);
+		msleep(200);
+
+		/*send phy reset to hard reset target */
+		rc = sas_phy_reset(phy, 1);
+		msleep(2000);
+	}
+	PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
+		pm8001_dev->device_id, rc));
+out:
+	sas_put_local_phy(phy);
+
+	return rc;
+}
+/* mandatory SAM-3, the task reset the specified LUN*/
+int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct pm8001_tmf_task tmf_task;
+	struct pm8001_device *pm8001_dev = dev->lldd_dev;
+	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+	DECLARE_COMPLETION_ONSTACK(completion_setstate);
+	if (dev_is_sata(dev)) {
+		struct sas_phy *phy = sas_get_local_phy(dev);
+		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+			dev, 1, 0);
+		rc = sas_phy_reset(phy, 1);
+		sas_put_local_phy(phy);
+		pm8001_dev->setds_completion = &completion_setstate;
+		rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+			pm8001_dev, 0x01);
+		wait_for_completion(&completion_setstate);
+	} else {
+		tmf_task.tmf = TMF_LU_RESET;
+		rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+	}
+	/* If failed, fall-through I_T_Nexus reset */
+	PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
+		pm8001_dev->device_id, rc));
+	return rc;
+}
+
+/* optional SAM-3 */
+int pm8001_query_task(struct sas_task *task)
+{
+	u32 tag = 0xdeadbeef;
+	int i = 0;
+	struct scsi_lun lun;
+	struct pm8001_tmf_task tmf_task;
+	int rc = TMF_RESP_FUNC_FAILED;
+	if (unlikely(!task || !task->lldd_task || !task->dev))
+		return rc;
+
+	if (task->task_proto & SAS_PROTOCOL_SSP) {
+		struct scsi_cmnd *cmnd = task->uldd_task;
+		struct domain_device *dev = task->dev;
+		struct pm8001_hba_info *pm8001_ha =
+			pm8001_find_ha_by_dev(dev);
+
+		int_to_scsilun(cmnd->device->lun, &lun);
+		rc = pm8001_find_tag(task, &tag);
+		if (rc == 0) {
+			rc = TMF_RESP_FUNC_FAILED;
+			return rc;
+		}
+		PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
+		for (i = 0; i < 16; i++)
+			printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
+		printk(KERN_INFO "]\n");
+		tmf_task.tmf = 	TMF_QUERY_TASK;
+		tmf_task.tag_of_task_to_be_managed = tag;
+
+		rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+		switch (rc) {
+		/* The task is still in Lun, release it then */
+		case TMF_RESP_FUNC_SUCC:
+			PM8001_EH_DBG(pm8001_ha,
+				pm8001_printk("The task is still in Lun\n"));
+			break;
+		/* The task is not in Lun or failed, reset the phy */
+		case TMF_RESP_FUNC_FAILED:
+		case TMF_RESP_FUNC_COMPLETE:
+			PM8001_EH_DBG(pm8001_ha,
+			pm8001_printk("The task is not in Lun or failed,"
+			" reset the phy\n"));
+			break;
+		}
+	}
+	pm8001_printk(":rc= %d\n", rc);
+	return rc;
+}
+
+/*  mandatory SAM-3, still need free task/ccb info, abord the specified task */
+int pm8001_abort_task(struct sas_task *task)
+{
+	unsigned long flags;
+	u32 tag = 0xdeadbeef;
+	u32 device_id;
+	struct domain_device *dev ;
+	struct pm8001_hba_info *pm8001_ha = NULL;
+	struct pm8001_ccb_info *ccb;
+	struct scsi_lun lun;
+	struct pm8001_device *pm8001_dev;
+	struct pm8001_tmf_task tmf_task;
+	int rc = TMF_RESP_FUNC_FAILED;
+	if (unlikely(!task || !task->lldd_task || !task->dev))
+		return rc;
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+		rc = TMF_RESP_FUNC_COMPLETE;
+		goto out;
+	}
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+	if (task->task_proto & SAS_PROTOCOL_SSP) {
+		struct scsi_cmnd *cmnd = task->uldd_task;
+		dev = task->dev;
+		ccb = task->lldd_task;
+		pm8001_dev = dev->lldd_dev;
+		pm8001_ha = pm8001_find_ha_by_dev(dev);
+		int_to_scsilun(cmnd->device->lun, &lun);
+		rc = pm8001_find_tag(task, &tag);
+		if (rc == 0) {
+			printk(KERN_INFO "No such tag in %s\n", __func__);
+			rc = TMF_RESP_FUNC_FAILED;
+			return rc;
+		}
+		device_id = pm8001_dev->device_id;
+		PM8001_EH_DBG(pm8001_ha,
+			pm8001_printk("abort io to deviceid= %d\n", device_id));
+		tmf_task.tmf = TMF_ABORT_TASK;
+		tmf_task.tag_of_task_to_be_managed = tag;
+		rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+		pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+			pm8001_dev->sas_device, 0, tag);
+	} else if (task->task_proto & SAS_PROTOCOL_SATA ||
+		task->task_proto & SAS_PROTOCOL_STP) {
+		dev = task->dev;
+		pm8001_dev = dev->lldd_dev;
+		pm8001_ha = pm8001_find_ha_by_dev(dev);
+		rc = pm8001_find_tag(task, &tag);
+		if (rc == 0) {
+			printk(KERN_INFO "No such tag in %s\n", __func__);
+			rc = TMF_RESP_FUNC_FAILED;
+			return rc;
+		}
+		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+			pm8001_dev->sas_device, 0, tag);
+	} else if (task->task_proto & SAS_PROTOCOL_SMP) {
+		/* SMP */
+		dev = task->dev;
+		pm8001_dev = dev->lldd_dev;
+		pm8001_ha = pm8001_find_ha_by_dev(dev);
+		rc = pm8001_find_tag(task, &tag);
+		if (rc == 0) {
+			printk(KERN_INFO "No such tag in %s\n", __func__);
+			rc = TMF_RESP_FUNC_FAILED;
+			return rc;
+		}
+		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+			pm8001_dev->sas_device, 0, tag);
+
+	}
+out:
+	if (rc != TMF_RESP_FUNC_COMPLETE)
+		pm8001_printk("rc= %d\n", rc);
+	return rc;
+}
+
+int pm8001_abort_task_set(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct pm8001_tmf_task tmf_task;
+
+	tmf_task.tmf = TMF_ABORT_TASK_SET;
+	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+	return rc;
+}
+
+int pm8001_clear_aca(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct pm8001_tmf_task tmf_task;
+
+	tmf_task.tmf = TMF_CLEAR_ACA;
+	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+
+	return rc;
+}
+
+int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
+{
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct pm8001_tmf_task tmf_task;
+	struct pm8001_device *pm8001_dev = dev->lldd_dev;
+	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+
+	PM8001_EH_DBG(pm8001_ha,
+		pm8001_printk("I_T_L_Q clear task set[%x]\n",
+		pm8001_dev->device_id));
+	tmf_task.tmf = TMF_CLEAR_TASK_SET;
+	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+	return rc;
+}
+
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
new file mode 100644
index 000000000..8dd8b7840
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -0,0 +1,723 @@
+/*
+ * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_SAS_H_
+#define _PM8001_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <linux/atomic.h>
+#include "pm8001_defs.h"
+
+#define DRV_NAME		"pm80xx"
+#define DRV_VERSION		"0.1.37"
+#define PM8001_FAIL_LOGGING	0x01 /* Error message logging */
+#define PM8001_INIT_LOGGING	0x02 /* driver init logging */
+#define PM8001_DISC_LOGGING	0x04 /* discovery layer logging */
+#define PM8001_IO_LOGGING	0x08 /* I/O path logging */
+#define PM8001_EH_LOGGING	0x10 /* libsas EH function logging*/
+#define PM8001_IOCTL_LOGGING	0x20 /* IOCTL message logging */
+#define PM8001_MSG_LOGGING	0x40 /* misc message logging */
+#define pm8001_printk(format, arg...)	printk(KERN_INFO "pm80xx %s %d:" \
+			format, __func__, __LINE__, ## arg)
+#define PM8001_CHECK_LOGGING(HBA, LEVEL, CMD)	\
+do {						\
+	if (unlikely(HBA->logging_level & LEVEL))	\
+		do {					\
+			CMD;				\
+		} while (0);				\
+} while (0);
+
+#define PM8001_EH_DBG(HBA, CMD)			\
+	PM8001_CHECK_LOGGING(HBA, PM8001_EH_LOGGING, CMD)
+
+#define PM8001_INIT_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_INIT_LOGGING, CMD)
+
+#define PM8001_DISC_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_DISC_LOGGING, CMD)
+
+#define PM8001_IO_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_IO_LOGGING, CMD)
+
+#define PM8001_FAIL_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_FAIL_LOGGING, CMD)
+
+#define PM8001_IOCTL_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_IOCTL_LOGGING, CMD)
+
+#define PM8001_MSG_DBG(HBA, CMD)		\
+	PM8001_CHECK_LOGGING(HBA, PM8001_MSG_LOGGING, CMD)
+
+
+#define PM8001_USE_TASKLET
+#define PM8001_USE_MSIX
+#define PM8001_READ_VPD
+
+
+#define DEV_IS_EXPANDER(type)	((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
+#define IS_SPCV_12G(dev)	((dev->device == 0X8074)		\
+				|| (dev->device == 0X8076)		\
+				|| (dev->device == 0X8077))
+
+#define PM8001_NAME_LENGTH		32/* generic length of strings */
+extern struct list_head hba_list;
+extern const struct pm8001_dispatch pm8001_8001_dispatch;
+extern const struct pm8001_dispatch pm8001_80xx_dispatch;
+
+struct pm8001_hba_info;
+struct pm8001_ccb_info;
+struct pm8001_device;
+/* define task management IU */
+struct pm8001_tmf_task {
+	u8	tmf;
+	u32	tag_of_task_to_be_managed;
+};
+struct pm8001_ioctl_payload {
+	u32	signature;
+	u16	major_function;
+	u16	minor_function;
+	u16	length;
+	u16	status;
+	u16	offset;
+	u16	id;
+	u8	*func_specific;
+};
+
+#define MPI_FATAL_ERROR_TABLE_OFFSET_MASK 0xFFFFFF
+#define MPI_FATAL_ERROR_TABLE_SIZE(value) ((0xFF000000 & value) >> SHIFT24)
+#define MPI_FATAL_EDUMP_TABLE_LO_OFFSET            0x00     /* HNFBUFL */
+#define MPI_FATAL_EDUMP_TABLE_HI_OFFSET            0x04     /* HNFBUFH */
+#define MPI_FATAL_EDUMP_TABLE_LENGTH               0x08     /* HNFBLEN */
+#define MPI_FATAL_EDUMP_TABLE_HANDSHAKE            0x0C     /* FDDHSHK */
+#define MPI_FATAL_EDUMP_TABLE_STATUS               0x10     /* FDDTSTAT */
+#define MPI_FATAL_EDUMP_TABLE_ACCUM_LEN            0x14     /* ACCDDLEN */
+#define MPI_FATAL_EDUMP_HANDSHAKE_RDY              0x1
+#define MPI_FATAL_EDUMP_HANDSHAKE_BUSY             0x0
+#define MPI_FATAL_EDUMP_TABLE_STAT_RSVD                 0x0
+#define MPI_FATAL_EDUMP_TABLE_STAT_DMA_FAILED           0x1
+#define MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_MORE_DATA 0x2
+#define MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE      0x3
+#define TYPE_GSM_SPACE        1
+#define TYPE_QUEUE            2
+#define TYPE_FATAL            3
+#define TYPE_NON_FATAL        4
+#define TYPE_INBOUND          1
+#define TYPE_OUTBOUND         2
+struct forensic_data {
+	u32  data_type;
+	union {
+		struct {
+			u32  direct_len;
+			u32  direct_offset;
+			void  *direct_data;
+		} gsm_buf;
+		struct {
+			u16  queue_type;
+			u16  queue_index;
+			u32  direct_len;
+			void  *direct_data;
+		} queue_buf;
+		struct {
+			u32  direct_len;
+			u32  direct_offset;
+			u32  read_len;
+			void  *direct_data;
+		} data_buf;
+	};
+};
+
+/* bit31-26 - mask bar */
+#define SCRATCH_PAD0_BAR_MASK                    0xFC000000
+/* bit25-0  - offset mask */
+#define SCRATCH_PAD0_OFFSET_MASK                 0x03FFFFFF
+/* if AAP error state */
+#define SCRATCH_PAD0_AAPERR_MASK                 0xFFFFFFFF
+/* Inbound doorbell bit7 */
+#define SPCv_MSGU_CFG_TABLE_NONFATAL_DUMP	 0x80
+/* Inbound doorbell bit7 SPCV */
+#define SPCV_MSGU_CFG_TABLE_TRANSFER_DEBUG_INFO  0x80
+#define MAIN_MERRDCTO_MERRDCES		         0xA0/* DWORD 0x28) */
+
+struct pm8001_dispatch {
+	char *name;
+	int (*chip_init)(struct pm8001_hba_info *pm8001_ha);
+	int (*chip_soft_rst)(struct pm8001_hba_info *pm8001_ha);
+	void (*chip_rst)(struct pm8001_hba_info *pm8001_ha);
+	int (*chip_ioremap)(struct pm8001_hba_info *pm8001_ha);
+	void (*chip_iounmap)(struct pm8001_hba_info *pm8001_ha);
+	irqreturn_t (*isr)(struct pm8001_hba_info *pm8001_ha, u8 vec);
+	u32 (*is_our_interupt)(struct pm8001_hba_info *pm8001_ha);
+	int (*isr_process_oq)(struct pm8001_hba_info *pm8001_ha, u8 vec);
+	void (*interrupt_enable)(struct pm8001_hba_info *pm8001_ha, u8 vec);
+	void (*interrupt_disable)(struct pm8001_hba_info *pm8001_ha, u8 vec);
+	void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
+	int (*smp_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_ccb_info *ccb);
+	int (*ssp_io_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_ccb_info *ccb);
+	int (*sata_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_ccb_info *ccb);
+	int (*phy_start_req)(struct pm8001_hba_info *pm8001_ha,	u8 phy_id);
+	int (*phy_stop_req)(struct pm8001_hba_info *pm8001_ha, u8 phy_id);
+	int (*reg_dev_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_device *pm8001_dev, u32 flag);
+	int (*dereg_dev_req)(struct pm8001_hba_info *pm8001_ha, u32 device_id);
+	int (*phy_ctl_req)(struct pm8001_hba_info *pm8001_ha,
+		u32 phy_id, u32 phy_op);
+	int (*task_abort)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_device *pm8001_dev, u8 flag, u32 task_tag,
+		u32 cmd_tag);
+	int (*ssp_tm_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf);
+	int (*get_nvmd_req)(struct pm8001_hba_info *pm8001_ha, void *payload);
+	int (*set_nvmd_req)(struct pm8001_hba_info *pm8001_ha, void *payload);
+	int (*fw_flash_update_req)(struct pm8001_hba_info *pm8001_ha,
+		void *payload);
+	int (*set_dev_state_req)(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_device *pm8001_dev, u32 state);
+	int (*sas_diag_start_end_req)(struct pm8001_hba_info *pm8001_ha,
+		u32 state);
+	int (*sas_diag_execute_req)(struct pm8001_hba_info *pm8001_ha,
+		u32 state);
+	int (*sas_re_init_req)(struct pm8001_hba_info *pm8001_ha);
+};
+
+struct pm8001_chip_info {
+	u32     encrypt;
+	u32	n_phy;
+	const struct pm8001_dispatch	*dispatch;
+};
+#define PM8001_CHIP_DISP	(pm8001_ha->chip->dispatch)
+
+struct pm8001_port {
+	struct asd_sas_port	sas_port;
+	u8			port_attached;
+	u8			wide_port_phymap;
+	u8			port_state;
+	struct list_head	list;
+};
+
+struct pm8001_phy {
+	struct pm8001_hba_info	*pm8001_ha;
+	struct pm8001_port	*port;
+	struct asd_sas_phy	sas_phy;
+	struct sas_identify	identify;
+	struct scsi_device	*sdev;
+	u64			dev_sas_addr;
+	u32			phy_type;
+	struct completion	*enable_completion;
+	u32			frame_rcvd_size;
+	u8			frame_rcvd[32];
+	u8			phy_attached;
+	u8			phy_state;
+	enum sas_linkrate	minimum_linkrate;
+	enum sas_linkrate	maximum_linkrate;
+};
+
+struct pm8001_device {
+	enum sas_device_type	dev_type;
+	struct domain_device	*sas_device;
+	u32			attached_phy;
+	u32			id;
+	struct completion	*dcompletion;
+	struct completion	*setds_completion;
+	u32			device_id;
+	u32			running_req;
+};
+
+struct pm8001_prd_imt {
+	__le32			len;
+	__le32			e;
+};
+
+struct pm8001_prd {
+	__le64			addr;		/* 64-bit buffer address */
+	struct pm8001_prd_imt	im_len;		/* 64-bit length */
+} __attribute__ ((packed));
+/*
+ * CCB(Command Control Block)
+ */
+struct pm8001_ccb_info {
+	struct list_head	entry;
+	struct sas_task		*task;
+	u32			n_elem;
+	u32			ccb_tag;
+	dma_addr_t		ccb_dma_handle;
+	struct pm8001_device	*device;
+	struct pm8001_prd	buf_prd[PM8001_MAX_DMA_SG];
+	struct fw_control_ex	*fw_control_context;
+	u8			open_retry;
+};
+
+struct mpi_mem {
+	void			*virt_ptr;
+	dma_addr_t		phys_addr;
+	u32			phys_addr_hi;
+	u32			phys_addr_lo;
+	u32			total_len;
+	u32			num_elements;
+	u32			element_size;
+	u32			alignment;
+};
+
+struct mpi_mem_req {
+	/* The number of element in the  mpiMemory array */
+	u32			count;
+	/* The array of structures that define memroy regions*/
+	struct mpi_mem		region[USI_MAX_MEMCNT];
+};
+
+struct encrypt {
+	u32	cipher_mode;
+	u32	sec_mode;
+	u32	status;
+	u32	flag;
+};
+
+struct sas_phy_attribute_table {
+	u32	phystart1_16[16];
+	u32	outbound_hw_event_pid1_16[16];
+};
+
+union main_cfg_table {
+	struct {
+	u32			signature;
+	u32			interface_rev;
+	u32			firmware_rev;
+	u32			max_out_io;
+	u32			max_sgl;
+	u32			ctrl_cap_flag;
+	u32			gst_offset;
+	u32			inbound_queue_offset;
+	u32			outbound_queue_offset;
+	u32			inbound_q_nppd_hppd;
+	u32			outbound_hw_event_pid0_3;
+	u32			outbound_hw_event_pid4_7;
+	u32			outbound_ncq_event_pid0_3;
+	u32			outbound_ncq_event_pid4_7;
+	u32			outbound_tgt_ITNexus_event_pid0_3;
+	u32			outbound_tgt_ITNexus_event_pid4_7;
+	u32			outbound_tgt_ssp_event_pid0_3;
+	u32			outbound_tgt_ssp_event_pid4_7;
+	u32			outbound_tgt_smp_event_pid0_3;
+	u32			outbound_tgt_smp_event_pid4_7;
+	u32			upper_event_log_addr;
+	u32			lower_event_log_addr;
+	u32			event_log_size;
+	u32			event_log_option;
+	u32			upper_iop_event_log_addr;
+	u32			lower_iop_event_log_addr;
+	u32			iop_event_log_size;
+	u32			iop_event_log_option;
+	u32			fatal_err_interrupt;
+	u32			fatal_err_dump_offset0;
+	u32			fatal_err_dump_length0;
+	u32			fatal_err_dump_offset1;
+	u32			fatal_err_dump_length1;
+	u32			hda_mode_flag;
+	u32			anolog_setup_table_offset;
+	u32			rsvd[4];
+	} pm8001_tbl;
+
+	struct {
+	u32			signature;
+	u32			interface_rev;
+	u32			firmware_rev;
+	u32			max_out_io;
+	u32			max_sgl;
+	u32			ctrl_cap_flag;
+	u32			gst_offset;
+	u32			inbound_queue_offset;
+	u32			outbound_queue_offset;
+	u32			inbound_q_nppd_hppd;
+	u32			rsvd[8];
+	u32			crc_core_dump;
+	u32			rsvd1;
+	u32			upper_event_log_addr;
+	u32			lower_event_log_addr;
+	u32			event_log_size;
+	u32			event_log_severity;
+	u32			upper_pcs_event_log_addr;
+	u32			lower_pcs_event_log_addr;
+	u32			pcs_event_log_size;
+	u32			pcs_event_log_severity;
+	u32			fatal_err_interrupt;
+	u32			fatal_err_dump_offset0;
+	u32			fatal_err_dump_length0;
+	u32			fatal_err_dump_offset1;
+	u32			fatal_err_dump_length1;
+	u32			gpio_led_mapping;
+	u32			analog_setup_table_offset;
+	u32			int_vec_table_offset;
+	u32			phy_attr_table_offset;
+	u32			port_recovery_timer;
+	u32			interrupt_reassertion_delay;
+	u32			fatal_n_non_fatal_dump;	        /* 0x28 */
+	} pm80xx_tbl;
+};
+
+union general_status_table {
+	struct {
+	u32			gst_len_mpistate;
+	u32			iq_freeze_state0;
+	u32			iq_freeze_state1;
+	u32			msgu_tcnt;
+	u32			iop_tcnt;
+	u32			rsvd;
+	u32			phy_state[8];
+	u32			gpio_input_val;
+	u32			rsvd1[2];
+	u32			recover_err_info[8];
+	} pm8001_tbl;
+	struct {
+	u32			gst_len_mpistate;
+	u32			iq_freeze_state0;
+	u32			iq_freeze_state1;
+	u32			msgu_tcnt;
+	u32			iop_tcnt;
+	u32			rsvd[9];
+	u32			gpio_input_val;
+	u32			rsvd1[2];
+	u32			recover_err_info[8];
+	} pm80xx_tbl;
+};
+struct inbound_queue_table {
+	u32			element_pri_size_cnt;
+	u32			upper_base_addr;
+	u32			lower_base_addr;
+	u32			ci_upper_base_addr;
+	u32			ci_lower_base_addr;
+	u32			pi_pci_bar;
+	u32			pi_offset;
+	u32			total_length;
+	void			*base_virt;
+	void			*ci_virt;
+	u32			reserved;
+	__le32			consumer_index;
+	u32			producer_idx;
+};
+struct outbound_queue_table {
+	u32			element_size_cnt;
+	u32			upper_base_addr;
+	u32			lower_base_addr;
+	void			*base_virt;
+	u32			pi_upper_base_addr;
+	u32			pi_lower_base_addr;
+	u32			ci_pci_bar;
+	u32			ci_offset;
+	u32			total_length;
+	void			*pi_virt;
+	u32			interrup_vec_cnt_delay;
+	u32			dinterrup_to_pci_offset;
+	__le32			producer_index;
+	u32			consumer_idx;
+};
+struct pm8001_hba_memspace {
+	void __iomem  		*memvirtaddr;
+	u64			membase;
+	u32			memsize;
+};
+struct isr_param {
+	struct pm8001_hba_info *drv_inst;
+	u32 irq_id;
+};
+struct pm8001_hba_info {
+	char			name[PM8001_NAME_LENGTH];
+	struct list_head	list;
+	unsigned long		flags;
+	spinlock_t		lock;/* host-wide lock */
+	spinlock_t		bitmap_lock;
+	struct pci_dev		*pdev;/* our device */
+	struct device		*dev;
+	struct pm8001_hba_memspace io_mem[6];
+	struct mpi_mem_req	memoryMap;
+	struct encrypt		encrypt_info; /* support encryption */
+	struct forensic_data	forensic_info;
+	u32			fatal_bar_loc;
+	u32			forensic_last_offset;
+	u32			fatal_forensic_shift_offset;
+	u32			forensic_fatal_step;
+	u32			evtlog_ib_offset;
+	u32			evtlog_ob_offset;
+	void __iomem	*msg_unit_tbl_addr;/*Message Unit Table Addr*/
+	void __iomem	*main_cfg_tbl_addr;/*Main Config Table Addr*/
+	void __iomem	*general_stat_tbl_addr;/*General Status Table Addr*/
+	void __iomem	*inbnd_q_tbl_addr;/*Inbound Queue Config Table Addr*/
+	void __iomem	*outbnd_q_tbl_addr;/*Outbound Queue Config Table Addr*/
+	void __iomem	*pspa_q_tbl_addr;
+			/*MPI SAS PHY attributes Queue Config Table Addr*/
+	void __iomem	*ivt_tbl_addr; /*MPI IVT Table Addr */
+	void __iomem	*fatal_tbl_addr; /*MPI IVT Table Addr */
+	union main_cfg_table	main_cfg_tbl;
+	union general_status_table	gs_tbl;
+	struct inbound_queue_table	inbnd_q_tbl[PM8001_MAX_SPCV_INB_NUM];
+	struct outbound_queue_table	outbnd_q_tbl[PM8001_MAX_SPCV_OUTB_NUM];
+	struct sas_phy_attribute_table	phy_attr_table;
+					/* MPI SAS PHY attributes */
+	u8			sas_addr[SAS_ADDR_SIZE];
+	struct sas_ha_struct	*sas;/* SCSI/SAS glue */
+	struct Scsi_Host	*shost;
+	u32			chip_id;
+	const struct pm8001_chip_info	*chip;
+	struct completion	*nvmd_completion;
+	int			tags_num;
+	unsigned long		*tags;
+	struct pm8001_phy	phy[PM8001_MAX_PHYS];
+	struct pm8001_port	port[PM8001_MAX_PHYS];
+	u32			id;
+	u32			irq;
+	u32			iomb_size; /* SPC and SPCV IOMB size */
+	struct pm8001_device	*devices;
+	struct pm8001_ccb_info	*ccb_info;
+#ifdef PM8001_USE_MSIX
+	struct msix_entry	msix_entries[PM8001_MAX_MSIX_VEC];
+					/*for msi-x interrupt*/
+	int			number_of_intr;/*will be used in remove()*/
+#endif
+#ifdef PM8001_USE_TASKLET
+	struct tasklet_struct	tasklet[PM8001_MAX_MSIX_VEC];
+#endif
+	u32			logging_level;
+	u32			fw_status;
+	u32			smp_exp_mode;
+	const struct firmware 	*fw_image;
+	struct isr_param irq_vector[PM8001_MAX_MSIX_VEC];
+};
+
+struct pm8001_work {
+	struct work_struct work;
+	struct pm8001_hba_info *pm8001_ha;
+	void *data;
+	int handler;
+};
+
+struct pm8001_fw_image_header {
+	u8 vender_id[8];
+	u8 product_id;
+	u8 hardware_rev;
+	u8 dest_partition;
+	u8 reserved;
+	u8 fw_rev[4];
+	__be32  image_length;
+	__be32 image_crc;
+	__be32 startup_entry;
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * FW Flash Update status values
+ */
+#define FLASH_UPDATE_COMPLETE_PENDING_REBOOT	0x00
+#define FLASH_UPDATE_IN_PROGRESS		0x01
+#define FLASH_UPDATE_HDR_ERR			0x02
+#define FLASH_UPDATE_OFFSET_ERR			0x03
+#define FLASH_UPDATE_CRC_ERR			0x04
+#define FLASH_UPDATE_LENGTH_ERR			0x05
+#define FLASH_UPDATE_HW_ERR			0x06
+#define FLASH_UPDATE_DNLD_NOT_SUPPORTED		0x10
+#define FLASH_UPDATE_DISABLED			0x11
+
+#define	NCQ_READ_LOG_FLAG			0x80000000
+#define	NCQ_ABORT_ALL_FLAG			0x40000000
+#define	NCQ_2ND_RLE_FLAG			0x20000000
+/**
+ * brief param structure for firmware flash update.
+ */
+struct fw_flash_updata_info {
+	u32			cur_image_offset;
+	u32			cur_image_len;
+	u32			total_image_len;
+	struct pm8001_prd	sgl;
+};
+
+struct fw_control_info {
+	u32			retcode;/*ret code (status)*/
+	u32			phase;/*ret code phase*/
+	u32			phaseCmplt;/*percent complete for the current
+	update phase */
+	u32			version;/*Hex encoded firmware version number*/
+	u32			offset;/*Used for downloading firmware	*/
+	u32			len; /*len of buffer*/
+	u32			size;/* Used in OS VPD and Trace get size
+	operations.*/
+	u32			reserved;/* padding required for 64 bit
+	alignment */
+	u8			buffer[1];/* Start of buffer */
+};
+struct fw_control_ex {
+	struct fw_control_info *fw_control;
+	void			*buffer;/* keep buffer pointer to be
+	freed when the response comes*/
+	void			*virtAddr;/* keep virtual address of the data */
+	void			*usrAddr;/* keep virtual address of the
+	user data */
+	dma_addr_t		phys_addr;
+	u32			len; /* len of buffer  */
+	void			*payload; /* pointer to IOCTL Payload */
+	u8			inProgress;/*if 1 - the IOCTL request is in
+	progress */
+	void			*param1;
+	void			*param2;
+	void			*param3;
+};
+
+/* pm8001 workqueue */
+extern struct workqueue_struct *pm8001_wq;
+
+/******************** function prototype *********************/
+int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out);
+void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha);
+u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag);
+void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
+	struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx);
+int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+	void *funcdata);
+void pm8001_scan_start(struct Scsi_Host *shost);
+int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags);
+int pm8001_abort_task(struct sas_task *task);
+int pm8001_abort_task_set(struct domain_device *dev, u8 *lun);
+int pm8001_clear_aca(struct domain_device *dev, u8 *lun);
+int pm8001_clear_task_set(struct domain_device *dev, u8 *lun);
+int pm8001_dev_found(struct domain_device *dev);
+void pm8001_dev_gone(struct domain_device *dev);
+int pm8001_lu_reset(struct domain_device *dev, u8 *lun);
+int pm8001_I_T_nexus_reset(struct domain_device *dev);
+int pm8001_I_T_nexus_event_handler(struct domain_device *dev);
+int pm8001_query_task(struct sas_task *task);
+void pm8001_open_reject_retry(
+	struct pm8001_hba_info *pm8001_ha,
+	struct sas_task *task_to_close,
+	struct pm8001_device *device_to_close);
+int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
+	dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo,
+	u32 mem_size, u32 align);
+
+void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha);
+int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
+			struct inbound_queue_table *circularQ,
+			u32 opCode, void *payload, u32 responseQueue);
+int pm8001_mpi_msg_free_get(struct inbound_queue_table *circularQ,
+				u16 messageSize, void **messagePtr);
+u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
+			struct outbound_queue_table *circularQ, u8 bc);
+u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
+			struct outbound_queue_table *circularQ,
+			void **messagePtr1, u8 *pBC);
+int pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha,
+			struct pm8001_device *pm8001_dev, u32 state);
+int pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
+					void *payload);
+int pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha,
+					void *fw_flash_updata_info, u32 tag);
+int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha, void *payload);
+int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha, void *payload);
+int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
+				struct pm8001_ccb_info *ccb,
+				struct pm8001_tmf_task *tmf);
+int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
+				struct pm8001_device *pm8001_dev,
+				u8 flag, u32 task_tag, u32 cmd_tag);
+int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha, u32 device_id);
+void pm8001_chip_make_sg(struct scatterlist *scatter, int nr, void *prd);
+void pm8001_work_fn(struct work_struct *work);
+int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha,
+					void *data, int handler);
+void pm8001_mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha,
+							void *piomb);
+void pm8001_mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha,
+							void *piomb);
+void pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha,
+							void *piomb);
+int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha,
+							void *piomb);
+void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate);
+void pm8001_get_attached_sas_addr(struct pm8001_phy *phy, u8 *sas_addr);
+void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i);
+int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
+int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
+int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha,
+							void *piomb);
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb);
+int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
+struct sas_task *pm8001_alloc_task(void);
+void pm8001_task_done(struct sas_task *task);
+void pm8001_free_task(struct sas_task *task);
+void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag);
+struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
+					u32 device_id);
+int pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha);
+
+int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
+void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
+	u32 length, u8 *buf);
+int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
+ssize_t pm80xx_get_fatal_dump(struct device *cdev,
+		struct device_attribute *attr, char *buf);
+ssize_t pm8001_get_gsm_dump(struct device *cdev, u32, char *buf);
+/* ctl shared API */
+extern struct device_attribute *pm8001_host_attrs[];
+
+static inline void
+pm8001_ccb_task_free_done(struct pm8001_hba_info *pm8001_ha,
+			struct sas_task *task, struct pm8001_ccb_info *ccb,
+			u32 ccb_idx)
+{
+	pm8001_ccb_task_free(pm8001_ha, task, ccb, ccb_idx);
+	smp_mb(); /*in order to force CPU ordering*/
+	spin_unlock(&pm8001_ha->lock);
+	task->task_done(task);
+	spin_lock(&pm8001_ha->lock);
+}
+
+#endif
+
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
new file mode 100644
index 000000000..05cce463a
--- /dev/null
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -0,0 +1,4551 @@
+/*
+ * PMC-Sierra SPCv/ve 8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 PMC-Sierra, Inc.,
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+ #include <linux/slab.h>
+ #include "pm8001_sas.h"
+ #include "pm80xx_hwi.h"
+ #include "pm8001_chips.h"
+ #include "pm8001_ctl.h"
+
+#define SMP_DIRECT 1
+#define SMP_INDIRECT 2
+
+
+int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shift_value)
+{
+	u32 reg_val;
+	unsigned long start;
+	pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER, shift_value);
+	/* confirm the setting is written */
+	start = jiffies + HZ; /* 1 sec */
+	do {
+		reg_val = pm8001_cr32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER);
+	} while ((reg_val != shift_value) && time_before(jiffies, start));
+	if (reg_val != shift_value) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("TIMEOUT:MEMBASE_II_SHIFT_REGISTER"
+			" = 0x%x\n", reg_val));
+		return -1;
+	}
+	return 0;
+}
+
+void pm80xx_pci_mem_copy(struct pm8001_hba_info  *pm8001_ha, u32 soffset,
+				const void *destination,
+				u32 dw_count, u32 bus_base_number)
+{
+	u32 index, value, offset;
+	u32 *destination1;
+	destination1 = (u32 *)destination;
+
+	for (index = 0; index < dw_count; index += 4, destination1++) {
+		offset = (soffset + index / 4);
+		if (offset < (64 * 1024)) {
+			value = pm8001_cr32(pm8001_ha, bus_base_number, offset);
+			*destination1 =  cpu_to_le32(value);
+		}
+	}
+	return;
+}
+
+ssize_t pm80xx_get_fatal_dump(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+	void __iomem *fatal_table_address = pm8001_ha->fatal_tbl_addr;
+	u32 accum_len , reg_val, index, *temp;
+	unsigned long start;
+	u8 *direct_data;
+	char *fatal_error_data = buf;
+
+	pm8001_ha->forensic_info.data_buf.direct_data = buf;
+	if (pm8001_ha->chip_id == chip_8001) {
+		pm8001_ha->forensic_info.data_buf.direct_data +=
+			sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+			"Not supported for SPC controller");
+		return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
+			(char *)buf;
+	}
+	if (pm8001_ha->forensic_info.data_buf.direct_offset == 0) {
+		PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("forensic_info TYPE_NON_FATAL..............\n"));
+		direct_data = (u8 *)fatal_error_data;
+		pm8001_ha->forensic_info.data_type = TYPE_NON_FATAL;
+		pm8001_ha->forensic_info.data_buf.direct_len = SYSFS_OFFSET;
+		pm8001_ha->forensic_info.data_buf.read_len = 0;
+
+		pm8001_ha->forensic_info.data_buf.direct_data = direct_data;
+
+		/* start to get data */
+		/* Program the MEMBASE II Shifting Register with 0x00.*/
+		pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER,
+				pm8001_ha->fatal_forensic_shift_offset);
+		pm8001_ha->forensic_last_offset = 0;
+		pm8001_ha->forensic_fatal_step = 0;
+		pm8001_ha->fatal_bar_loc = 0;
+	}
+
+	/* Read until accum_len is retrived */
+	accum_len = pm8001_mr32(fatal_table_address,
+				MPI_FATAL_EDUMP_TABLE_ACCUM_LEN);
+	PM8001_IO_DBG(pm8001_ha, pm8001_printk("accum_len 0x%x\n",
+						accum_len));
+	if (accum_len == 0xFFFFFFFF) {
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("Possible PCI issue 0x%x not expected\n",
+				accum_len));
+		return -EIO;
+	}
+	if (accum_len == 0 || accum_len >= 0x100000) {
+		pm8001_ha->forensic_info.data_buf.direct_data +=
+			sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+				"%08x ", 0xFFFFFFFF);
+		return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
+			(char *)buf;
+	}
+	temp = (u32 *)pm8001_ha->memoryMap.region[FORENSIC_MEM].virt_ptr;
+	if (pm8001_ha->forensic_fatal_step == 0) {
+moreData:
+		if (pm8001_ha->forensic_info.data_buf.direct_data) {
+			/* Data is in bar, copy to host memory */
+			pm80xx_pci_mem_copy(pm8001_ha, pm8001_ha->fatal_bar_loc,
+			 pm8001_ha->memoryMap.region[FORENSIC_MEM].virt_ptr,
+				pm8001_ha->forensic_info.data_buf.direct_len ,
+					1);
+		}
+		pm8001_ha->fatal_bar_loc +=
+			pm8001_ha->forensic_info.data_buf.direct_len;
+		pm8001_ha->forensic_info.data_buf.direct_offset +=
+			pm8001_ha->forensic_info.data_buf.direct_len;
+		pm8001_ha->forensic_last_offset	+=
+			pm8001_ha->forensic_info.data_buf.direct_len;
+		pm8001_ha->forensic_info.data_buf.read_len =
+			pm8001_ha->forensic_info.data_buf.direct_len;
+
+		if (pm8001_ha->forensic_last_offset  >= accum_len) {
+			pm8001_ha->forensic_info.data_buf.direct_data +=
+			sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+				"%08x ", 3);
+			for (index = 0; index < (SYSFS_OFFSET / 4); index++) {
+				pm8001_ha->forensic_info.data_buf.direct_data +=
+					sprintf(pm8001_ha->
+					 forensic_info.data_buf.direct_data,
+						"%08x ", *(temp + index));
+			}
+
+			pm8001_ha->fatal_bar_loc = 0;
+			pm8001_ha->forensic_fatal_step = 1;
+			pm8001_ha->fatal_forensic_shift_offset = 0;
+			pm8001_ha->forensic_last_offset	= 0;
+			return (char *)pm8001_ha->
+				forensic_info.data_buf.direct_data -
+				(char *)buf;
+		}
+		if (pm8001_ha->fatal_bar_loc < (64 * 1024)) {
+			pm8001_ha->forensic_info.data_buf.direct_data +=
+				sprintf(pm8001_ha->
+					forensic_info.data_buf.direct_data,
+					"%08x ", 2);
+			for (index = 0; index < (SYSFS_OFFSET / 4); index++) {
+				pm8001_ha->forensic_info.data_buf.direct_data +=
+					sprintf(pm8001_ha->
+					forensic_info.data_buf.direct_data,
+					"%08x ", *(temp + index));
+			}
+			return (char *)pm8001_ha->
+				forensic_info.data_buf.direct_data -
+				(char *)buf;
+		}
+
+		/* Increment the MEMBASE II Shifting Register value by 0x100.*/
+		pm8001_ha->forensic_info.data_buf.direct_data +=
+			sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+				"%08x ", 2);
+		for (index = 0; index < 256; index++) {
+			pm8001_ha->forensic_info.data_buf.direct_data +=
+				sprintf(pm8001_ha->
+					forensic_info.data_buf.direct_data,
+						"%08x ", *(temp + index));
+		}
+		pm8001_ha->fatal_forensic_shift_offset += 0x100;
+		pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER,
+			pm8001_ha->fatal_forensic_shift_offset);
+		pm8001_ha->fatal_bar_loc = 0;
+		return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
+			(char *)buf;
+	}
+	if (pm8001_ha->forensic_fatal_step == 1) {
+		pm8001_ha->fatal_forensic_shift_offset = 0;
+		/* Read 64K of the debug data. */
+		pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER,
+			pm8001_ha->fatal_forensic_shift_offset);
+		pm8001_mw32(fatal_table_address,
+			MPI_FATAL_EDUMP_TABLE_HANDSHAKE,
+				MPI_FATAL_EDUMP_HANDSHAKE_RDY);
+
+		/* Poll FDDHSHK  until clear  */
+		start = jiffies + (2 * HZ); /* 2 sec */
+
+		do {
+			reg_val = pm8001_mr32(fatal_table_address,
+					MPI_FATAL_EDUMP_TABLE_HANDSHAKE);
+		} while ((reg_val) && time_before(jiffies, start));
+
+		if (reg_val != 0) {
+			PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("TIMEOUT:MEMBASE_II_SHIFT_REGISTER"
+			" = 0x%x\n", reg_val));
+			return -EIO;
+		}
+
+		/* Read the next 64K of the debug data. */
+		pm8001_ha->forensic_fatal_step = 0;
+		if (pm8001_mr32(fatal_table_address,
+			MPI_FATAL_EDUMP_TABLE_STATUS) !=
+				MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE) {
+			pm8001_mw32(fatal_table_address,
+				MPI_FATAL_EDUMP_TABLE_HANDSHAKE, 0);
+			goto moreData;
+		} else {
+			pm8001_ha->forensic_info.data_buf.direct_data +=
+				sprintf(pm8001_ha->
+					forensic_info.data_buf.direct_data,
+						"%08x ", 4);
+			pm8001_ha->forensic_info.data_buf.read_len = 0xFFFFFFFF;
+			pm8001_ha->forensic_info.data_buf.direct_len =  0;
+			pm8001_ha->forensic_info.data_buf.direct_offset = 0;
+			pm8001_ha->forensic_info.data_buf.read_len = 0;
+		}
+	}
+
+	return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
+		(char *)buf;
+}
+
+/**
+ * read_main_config_table - read the configure table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+	void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature	=
+		pm8001_mr32(address, MAIN_SIGNATURE_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev =
+		pm8001_mr32(address, MAIN_INTERFACE_REVISION);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev	=
+		pm8001_mr32(address, MAIN_FW_REVISION);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io	=
+		pm8001_mr32(address, MAIN_MAX_OUTSTANDING_IO_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl	=
+		pm8001_mr32(address, MAIN_MAX_SGL_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.ctrl_cap_flag =
+		pm8001_mr32(address, MAIN_CNTRL_CAP_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset	=
+		pm8001_mr32(address, MAIN_GST_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset =
+		pm8001_mr32(address, MAIN_IBQ_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset =
+		pm8001_mr32(address, MAIN_OBQ_OFFSET);
+
+	/* read Error Dump Offset and Length */
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset0 =
+		pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length0 =
+		pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset1 =
+		pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length1 =
+		pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH);
+
+	/* read GPIO LED settings from the configuration table */
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping =
+		pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET);
+
+	/* read analog Setting offset from the configuration table */
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.analog_setup_table_offset =
+		pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET);
+
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset =
+		pm8001_mr32(address, MAIN_INT_VECTOR_TABLE_OFFSET);
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset =
+		pm8001_mr32(address, MAIN_SAS_PHY_ATTR_TABLE_OFFSET);
+}
+
+/**
+ * read_general_status_table - read the general status table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+{
+	void __iomem *address = pm8001_ha->general_stat_tbl_addr;
+	pm8001_ha->gs_tbl.pm80xx_tbl.gst_len_mpistate	=
+			pm8001_mr32(address, GST_GSTLEN_MPIS_OFFSET);
+	pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state0	=
+			pm8001_mr32(address, GST_IQ_FREEZE_STATE0_OFFSET);
+	pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state1	=
+			pm8001_mr32(address, GST_IQ_FREEZE_STATE1_OFFSET);
+	pm8001_ha->gs_tbl.pm80xx_tbl.msgu_tcnt		=
+			pm8001_mr32(address, GST_MSGUTCNT_OFFSET);
+	pm8001_ha->gs_tbl.pm80xx_tbl.iop_tcnt		=
+			pm8001_mr32(address, GST_IOPTCNT_OFFSET);
+	pm8001_ha->gs_tbl.pm80xx_tbl.gpio_input_val	=
+			pm8001_mr32(address, GST_GPIO_INPUT_VAL);
+	pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[0] =
+			pm8001_mr32(address, GST_RERRINFO_OFFSET0);
+	pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[1] =
+			pm8001_mr32(address, GST_RERRINFO_OFFSET1);
+	pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[2] =
+			pm8001_mr32(address, GST_RERRINFO_OFFSET2);
+	pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[3] =
+			pm8001_mr32(address, GST_RERRINFO_OFFSET3);
+	pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[4] =
+			pm8001_mr32(address, GST_RERRINFO_OFFSET4);
+	pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[5] =
+			pm8001_mr32(address, GST_RERRINFO_OFFSET5);
+	pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[6] =
+			pm8001_mr32(address, GST_RERRINFO_OFFSET6);
+	pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[7] =
+			 pm8001_mr32(address, GST_RERRINFO_OFFSET7);
+}
+/**
+ * read_phy_attr_table - read the phy attribute table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_phy_attr_table(struct pm8001_hba_info *pm8001_ha)
+{
+	void __iomem *address = pm8001_ha->pspa_q_tbl_addr;
+	pm8001_ha->phy_attr_table.phystart1_16[0] =
+			pm8001_mr32(address, PSPA_PHYSTATE0_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[1] =
+			pm8001_mr32(address, PSPA_PHYSTATE1_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[2] =
+			pm8001_mr32(address, PSPA_PHYSTATE2_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[3] =
+			pm8001_mr32(address, PSPA_PHYSTATE3_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[4] =
+			pm8001_mr32(address, PSPA_PHYSTATE4_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[5] =
+			pm8001_mr32(address, PSPA_PHYSTATE5_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[6] =
+			pm8001_mr32(address, PSPA_PHYSTATE6_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[7] =
+			pm8001_mr32(address, PSPA_PHYSTATE7_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[8] =
+			pm8001_mr32(address, PSPA_PHYSTATE8_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[9] =
+			pm8001_mr32(address, PSPA_PHYSTATE9_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[10] =
+			pm8001_mr32(address, PSPA_PHYSTATE10_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[11] =
+			pm8001_mr32(address, PSPA_PHYSTATE11_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[12] =
+			pm8001_mr32(address, PSPA_PHYSTATE12_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[13] =
+			pm8001_mr32(address, PSPA_PHYSTATE13_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[14] =
+			pm8001_mr32(address, PSPA_PHYSTATE14_OFFSET);
+	pm8001_ha->phy_attr_table.phystart1_16[15] =
+			pm8001_mr32(address, PSPA_PHYSTATE15_OFFSET);
+
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[0] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID0_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[1] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID1_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[2] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID2_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[3] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID3_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[4] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID4_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[5] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID5_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[6] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID6_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[7] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID7_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[8] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID8_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[9] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID9_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[10] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID10_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[11] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID11_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[12] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID12_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[13] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID13_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[14] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID14_OFFSET);
+	pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[15] =
+			pm8001_mr32(address, PSPA_OB_HW_EVENT_PID15_OFFSET);
+
+}
+
+/**
+ * read_inbnd_queue_table - read the inbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+	int i;
+	void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+	for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
+		u32 offset = i * 0x20;
+		pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+			get_pci_bar_index(pm8001_mr32(address,
+				(offset + IB_PIPCI_BAR)));
+		pm8001_ha->inbnd_q_tbl[i].pi_offset =
+			pm8001_mr32(address, (offset + IB_PIPCI_BAR_OFFSET));
+	}
+}
+
+/**
+ * read_outbnd_queue_table - read the outbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+	int i;
+	void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+	for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
+		u32 offset = i * 0x24;
+		pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+			get_pci_bar_index(pm8001_mr32(address,
+				(offset + OB_CIPCI_BAR)));
+		pm8001_ha->outbnd_q_tbl[i].ci_offset =
+			pm8001_mr32(address, (offset + OB_CIPCI_BAR_OFFSET));
+	}
+}
+
+/**
+ * init_default_table_values - init the default table.
+ * @pm8001_ha: our hba card information
+ */
+static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+{
+	int i;
+	u32 offsetib, offsetob;
+	void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
+	void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
+
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr		=
+		pm8001_ha->memoryMap.region[AAP1].phys_addr_hi;
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr		=
+		pm8001_ha->memoryMap.region[AAP1].phys_addr_lo;
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size		=
+							PM8001_EVENT_LOG_SIZE;
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity		= 0x01;
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr	=
+		pm8001_ha->memoryMap.region[IOP].phys_addr_hi;
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr	=
+		pm8001_ha->memoryMap.region[IOP].phys_addr_lo;
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size		=
+							PM8001_EVENT_LOG_SIZE;
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity	= 0x01;
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt		= 0x01;
+
+	/* Disable end to end CRC checking */
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump = (0x1 << 16);
+
+	for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
+		pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt	=
+			PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
+		pm8001_ha->inbnd_q_tbl[i].upper_base_addr	=
+			pm8001_ha->memoryMap.region[IB + i].phys_addr_hi;
+		pm8001_ha->inbnd_q_tbl[i].lower_base_addr	=
+		pm8001_ha->memoryMap.region[IB + i].phys_addr_lo;
+		pm8001_ha->inbnd_q_tbl[i].base_virt		=
+			(u8 *)pm8001_ha->memoryMap.region[IB + i].virt_ptr;
+		pm8001_ha->inbnd_q_tbl[i].total_length		=
+			pm8001_ha->memoryMap.region[IB + i].total_len;
+		pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr	=
+			pm8001_ha->memoryMap.region[CI + i].phys_addr_hi;
+		pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr	=
+			pm8001_ha->memoryMap.region[CI + i].phys_addr_lo;
+		pm8001_ha->inbnd_q_tbl[i].ci_virt		=
+			pm8001_ha->memoryMap.region[CI + i].virt_ptr;
+		offsetib = i * 0x20;
+		pm8001_ha->inbnd_q_tbl[i].pi_pci_bar		=
+			get_pci_bar_index(pm8001_mr32(addressib,
+				(offsetib + 0x14)));
+		pm8001_ha->inbnd_q_tbl[i].pi_offset		=
+			pm8001_mr32(addressib, (offsetib + 0x18));
+		pm8001_ha->inbnd_q_tbl[i].producer_idx		= 0;
+		pm8001_ha->inbnd_q_tbl[i].consumer_index	= 0;
+	}
+	for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
+		pm8001_ha->outbnd_q_tbl[i].element_size_cnt	=
+			PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
+		pm8001_ha->outbnd_q_tbl[i].upper_base_addr	=
+			pm8001_ha->memoryMap.region[OB + i].phys_addr_hi;
+		pm8001_ha->outbnd_q_tbl[i].lower_base_addr	=
+			pm8001_ha->memoryMap.region[OB + i].phys_addr_lo;
+		pm8001_ha->outbnd_q_tbl[i].base_virt		=
+			(u8 *)pm8001_ha->memoryMap.region[OB + i].virt_ptr;
+		pm8001_ha->outbnd_q_tbl[i].total_length		=
+			pm8001_ha->memoryMap.region[OB + i].total_len;
+		pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr	=
+			pm8001_ha->memoryMap.region[PI + i].phys_addr_hi;
+		pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr	=
+			pm8001_ha->memoryMap.region[PI + i].phys_addr_lo;
+		/* interrupt vector based on oq */
+		pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay = (i << 24);
+		pm8001_ha->outbnd_q_tbl[i].pi_virt		=
+			pm8001_ha->memoryMap.region[PI + i].virt_ptr;
+		offsetob = i * 0x24;
+		pm8001_ha->outbnd_q_tbl[i].ci_pci_bar		=
+			get_pci_bar_index(pm8001_mr32(addressob,
+			offsetob + 0x14));
+		pm8001_ha->outbnd_q_tbl[i].ci_offset		=
+			pm8001_mr32(addressob, (offsetob + 0x18));
+		pm8001_ha->outbnd_q_tbl[i].consumer_idx		= 0;
+		pm8001_ha->outbnd_q_tbl[i].producer_index	= 0;
+	}
+}
+
+/**
+ * update_main_config_table - update the main default table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+	void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+	pm8001_mw32(address, MAIN_IQNPPD_HPPD_OFFSET,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_q_nppd_hppd);
+	pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_HI,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr);
+	pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_LO,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr);
+	pm8001_mw32(address, MAIN_EVENT_LOG_BUFF_SIZE,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size);
+	pm8001_mw32(address, MAIN_EVENT_LOG_OPTION,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity);
+	pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_HI,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr);
+	pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_LO,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr);
+	pm8001_mw32(address, MAIN_PCS_EVENT_LOG_BUFF_SIZE,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size);
+	pm8001_mw32(address, MAIN_PCS_EVENT_LOG_OPTION,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity);
+	pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt);
+	pm8001_mw32(address, MAIN_EVENT_CRC_CHECK,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump);
+
+	/* SPCv specific */
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping &= 0xCFFFFFFF;
+	/* Set GPIOLED to 0x2 for LED indicator */
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping |= 0x20000000;
+	pm8001_mw32(address, MAIN_GPIO_LED_FLAGS_OFFSET,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping);
+
+	pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
+	pm8001_mw32(address, MAIN_INT_REASSERTION_DELAY,
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.interrupt_reassertion_delay);
+}
+
+/**
+ * update_inbnd_queue_table - update the inbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+					 int number)
+{
+	void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+	u16 offset = number * 0x20;
+	pm8001_mw32(address, offset + IB_PROPERITY_OFFSET,
+		pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
+	pm8001_mw32(address, offset + IB_BASE_ADDR_HI_OFFSET,
+		pm8001_ha->inbnd_q_tbl[number].upper_base_addr);
+	pm8001_mw32(address, offset + IB_BASE_ADDR_LO_OFFSET,
+		pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
+	pm8001_mw32(address, offset + IB_CI_BASE_ADDR_HI_OFFSET,
+		pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr);
+	pm8001_mw32(address, offset + IB_CI_BASE_ADDR_LO_OFFSET,
+		pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
+}
+
+/**
+ * update_outbnd_queue_table - update the outbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+						 int number)
+{
+	void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+	u16 offset = number * 0x24;
+	pm8001_mw32(address, offset + OB_PROPERITY_OFFSET,
+		pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
+	pm8001_mw32(address, offset + OB_BASE_ADDR_HI_OFFSET,
+		pm8001_ha->outbnd_q_tbl[number].upper_base_addr);
+	pm8001_mw32(address, offset + OB_BASE_ADDR_LO_OFFSET,
+		pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
+	pm8001_mw32(address, offset + OB_PI_BASE_ADDR_HI_OFFSET,
+		pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr);
+	pm8001_mw32(address, offset + OB_PI_BASE_ADDR_LO_OFFSET,
+		pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
+	pm8001_mw32(address, offset + OB_INTERRUPT_COALES_OFFSET,
+		pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay);
+}
+
+/**
+ * mpi_init_check - check firmware initialization status.
+ * @pm8001_ha: our hba card information
+ */
+static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 max_wait_count;
+	u32 value;
+	u32 gst_len_mpistate;
+
+	/* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the
+	table is updated */
+	pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_UPDATE);
+	/* wait until Inbound DoorBell Clear Register toggled */
+	if (IS_SPCV_12G(pm8001_ha->pdev)) {
+		max_wait_count = 4 * 1000 * 1000;/* 4 sec */
+	} else {
+		max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+	}
+	do {
+		udelay(1);
+		value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+		value &= SPCv_MSGU_CFG_TABLE_UPDATE;
+	} while ((value != 0) && (--max_wait_count));
+
+	if (!max_wait_count)
+		return -1;
+	/* check the MPI-State for initialization upto 100ms*/
+	max_wait_count = 100 * 1000;/* 100 msec */
+	do {
+		udelay(1);
+		gst_len_mpistate =
+			pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+					GST_GSTLEN_MPIS_OFFSET);
+	} while ((GST_MPI_STATE_INIT !=
+		(gst_len_mpistate & GST_MPI_STATE_MASK)) && (--max_wait_count));
+	if (!max_wait_count)
+		return -1;
+
+	/* check MPI Initialization error */
+	gst_len_mpistate = gst_len_mpistate >> 16;
+	if (0x0000 != gst_len_mpistate)
+		return -1;
+
+	return 0;
+}
+
+/**
+ * check_fw_ready - The LLDD check if the FW is ready, if not, return error.
+ * @pm8001_ha: our hba card information
+ */
+static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 value;
+	u32 max_wait_count;
+	u32 max_wait_time;
+	int ret = 0;
+
+	/* reset / PCIe ready */
+	max_wait_time = max_wait_count = 100 * 1000;	/* 100 milli sec */
+	do {
+		udelay(1);
+		value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+	} while ((value == 0xFFFFFFFF) && (--max_wait_count));
+
+	/* check ila status */
+	max_wait_time = max_wait_count = 1000 * 1000;	/* 1000 milli sec */
+	do {
+		udelay(1);
+		value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+	} while (((value & SCRATCH_PAD_ILA_READY) !=
+			SCRATCH_PAD_ILA_READY) && (--max_wait_count));
+	if (!max_wait_count)
+		ret = -1;
+	else {
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" ila ready status in %d millisec\n",
+				(max_wait_time - max_wait_count)));
+	}
+
+	/* check RAAE status */
+	max_wait_time = max_wait_count = 1800 * 1000;	/* 1800 milli sec */
+	do {
+		udelay(1);
+		value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+	} while (((value & SCRATCH_PAD_RAAE_READY) !=
+				SCRATCH_PAD_RAAE_READY) && (--max_wait_count));
+	if (!max_wait_count)
+		ret = -1;
+	else {
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" raae ready status in %d millisec\n",
+					(max_wait_time - max_wait_count)));
+	}
+
+	/* check iop0 status */
+	max_wait_time = max_wait_count = 600 * 1000;	/* 600 milli sec */
+	do {
+		udelay(1);
+		value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+	} while (((value & SCRATCH_PAD_IOP0_READY) != SCRATCH_PAD_IOP0_READY) &&
+			(--max_wait_count));
+	if (!max_wait_count)
+		ret = -1;
+	else {
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" iop0 ready status in %d millisec\n",
+				(max_wait_time - max_wait_count)));
+	}
+
+	/* check iop1 status only for 16 port controllers */
+	if ((pm8001_ha->chip_id != chip_8008) &&
+			(pm8001_ha->chip_id != chip_8009)) {
+		/* 200 milli sec */
+		max_wait_time = max_wait_count = 200 * 1000;
+		do {
+			udelay(1);
+			value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+		} while (((value & SCRATCH_PAD_IOP1_READY) !=
+				SCRATCH_PAD_IOP1_READY) && (--max_wait_count));
+		if (!max_wait_count)
+			ret = -1;
+		else {
+			PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+				"iop1 ready status in %d millisec\n",
+				(max_wait_time - max_wait_count)));
+		}
+	}
+
+	return ret;
+}
+
+static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
+{
+	void __iomem *base_addr;
+	u32	value;
+	u32	offset;
+	u32	pcibar;
+	u32	pcilogic;
+
+	value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+	offset = value & 0x03FFFFFF; /* scratch pad 0 TBL address */
+
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("Scratchpad 0 Offset: 0x%x value 0x%x\n",
+				offset, value));
+	pcilogic = (value & 0xFC000000) >> 26;
+	pcibar = get_pci_bar_index(pcilogic);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar));
+	pm8001_ha->main_cfg_tbl_addr = base_addr =
+		pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
+	pm8001_ha->general_stat_tbl_addr =
+		base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x18) &
+					0xFFFFFF);
+	pm8001_ha->inbnd_q_tbl_addr =
+		base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C) &
+					0xFFFFFF);
+	pm8001_ha->outbnd_q_tbl_addr =
+		base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x20) &
+					0xFFFFFF);
+	pm8001_ha->ivt_tbl_addr =
+		base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C) &
+					0xFFFFFF);
+	pm8001_ha->pspa_q_tbl_addr =
+		base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x90) &
+					0xFFFFFF);
+	pm8001_ha->fatal_tbl_addr =
+		base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0xA0) &
+					0xFFFFFF);
+
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("GST OFFSET 0x%x\n",
+			pm8001_cr32(pm8001_ha, pcibar, offset + 0x18)));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("INBND OFFSET 0x%x\n",
+			pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C)));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("OBND OFFSET 0x%x\n",
+			pm8001_cr32(pm8001_ha, pcibar, offset + 0x20)));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("IVT OFFSET 0x%x\n",
+			pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C)));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("PSPA OFFSET 0x%x\n",
+			pm8001_cr32(pm8001_ha, pcibar, offset + 0x90)));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("addr - main cfg %p general status %p\n",
+			pm8001_ha->main_cfg_tbl_addr,
+			pm8001_ha->general_stat_tbl_addr));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("addr - inbnd %p obnd %p\n",
+			pm8001_ha->inbnd_q_tbl_addr,
+			pm8001_ha->outbnd_q_tbl_addr));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("addr - pspa %p ivt %p\n",
+			pm8001_ha->pspa_q_tbl_addr,
+			pm8001_ha->ivt_tbl_addr));
+}
+
+/**
+ * pm80xx_set_thermal_config - support the thermal configuration
+ * @pm8001_ha: our hba card information.
+ */
+int
+pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
+{
+	struct set_ctrl_cfg_req payload;
+	struct inbound_queue_table *circularQ;
+	int rc;
+	u32 tag;
+	u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+
+	memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+	if (rc)
+		return -1;
+
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	payload.tag = cpu_to_le32(tag);
+	payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) |
+			(THERMAL_ENABLE << 8) | THERMAL_OP_CODE;
+	payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
+
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	if (rc)
+		pm8001_tag_free(pm8001_ha, tag);
+	return rc;
+
+}
+
+/**
+* pm80xx_set_sas_protocol_timer_config - support the SAS Protocol
+* Timer configuration page
+* @pm8001_ha: our hba card information.
+*/
+static int
+pm80xx_set_sas_protocol_timer_config(struct pm8001_hba_info *pm8001_ha)
+{
+	struct set_ctrl_cfg_req payload;
+	struct inbound_queue_table *circularQ;
+	SASProtocolTimerConfig_t SASConfigPage;
+	int rc;
+	u32 tag;
+	u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+
+	memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
+	memset(&SASConfigPage, 0, sizeof(SASProtocolTimerConfig_t));
+
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+
+	if (rc)
+		return -1;
+
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	payload.tag = cpu_to_le32(tag);
+
+	SASConfigPage.pageCode        =  SAS_PROTOCOL_TIMER_CONFIG_PAGE;
+	SASConfigPage.MST_MSI         =  3 << 15;
+	SASConfigPage.STP_SSP_MCT_TMO =  (STP_MCT_TMO << 16) | SSP_MCT_TMO;
+	SASConfigPage.STP_FRM_TMO     = (SAS_MAX_OPEN_TIME << 24) |
+				(SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER;
+	SASConfigPage.STP_IDLE_TMO    =  STP_IDLE_TIME;
+
+	if (SASConfigPage.STP_IDLE_TMO > 0x3FFFFFF)
+		SASConfigPage.STP_IDLE_TMO = 0x3FFFFFF;
+
+
+	SASConfigPage.OPNRJT_RTRY_INTVL =         (SAS_MFD << 16) |
+						SAS_OPNRJT_RTRY_INTVL;
+	SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO =  (SAS_DOPNRJT_RTRY_TMO << 16)
+						| SAS_COPNRJT_RTRY_TMO;
+	SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR =  (SAS_DOPNRJT_RTRY_THR << 16)
+						| SAS_COPNRJT_RTRY_THR;
+	SASConfigPage.MAX_AIP =  SAS_MAX_AIP;
+
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("SASConfigPage.pageCode "
+			"0x%08x\n", SASConfigPage.pageCode));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("SASConfigPage.MST_MSI "
+			" 0x%08x\n", SASConfigPage.MST_MSI));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("SASConfigPage.STP_SSP_MCT_TMO "
+			" 0x%08x\n", SASConfigPage.STP_SSP_MCT_TMO));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("SASConfigPage.STP_FRM_TMO "
+			" 0x%08x\n", SASConfigPage.STP_FRM_TMO));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("SASConfigPage.STP_IDLE_TMO "
+			" 0x%08x\n", SASConfigPage.STP_IDLE_TMO));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("SASConfigPage.OPNRJT_RTRY_INTVL "
+			" 0x%08x\n", SASConfigPage.OPNRJT_RTRY_INTVL));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO "
+			" 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO));
+	PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR "
+			" 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR));
+	PM8001_INIT_DBG(pm8001_ha, pm8001_printk("SASConfigPage.MAX_AIP "
+			" 0x%08x\n", SASConfigPage.MAX_AIP));
+
+	memcpy(&payload.cfg_pg, &SASConfigPage,
+			 sizeof(SASProtocolTimerConfig_t));
+
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	if (rc)
+		pm8001_tag_free(pm8001_ha, tag);
+
+	return rc;
+}
+
+/**
+ * pm80xx_get_encrypt_info - Check for encryption
+ * @pm8001_ha: our hba card information.
+ */
+static int
+pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 scratch3_value;
+	int ret = -1;
+
+	/* Read encryption status from SCRATCH PAD 3 */
+	scratch3_value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
+
+	if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+					SCRATCH_PAD3_ENC_READY) {
+		if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+			pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+		if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+						SCRATCH_PAD3_SMF_ENABLED)
+			pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+		if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+						SCRATCH_PAD3_SMA_ENABLED)
+			pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+		if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+						SCRATCH_PAD3_SMB_ENABLED)
+			pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+		pm8001_ha->encrypt_info.status = 0;
+		PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+			"Encryption: SCRATCH_PAD3_ENC_READY 0x%08X."
+			"Cipher mode 0x%x Sec mode 0x%x status 0x%x\n",
+			scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
+			pm8001_ha->encrypt_info.sec_mode,
+			pm8001_ha->encrypt_info.status));
+		ret = 0;
+	} else if ((scratch3_value & SCRATCH_PAD3_ENC_READY) ==
+					SCRATCH_PAD3_ENC_DISABLED) {
+		PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+			"Encryption: SCRATCH_PAD3_ENC_DISABLED 0x%08X\n",
+			scratch3_value));
+		pm8001_ha->encrypt_info.status = 0xFFFFFFFF;
+		pm8001_ha->encrypt_info.cipher_mode = 0;
+		pm8001_ha->encrypt_info.sec_mode = 0;
+		ret = 0;
+	} else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+				SCRATCH_PAD3_ENC_DIS_ERR) {
+		pm8001_ha->encrypt_info.status =
+			(scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16;
+		if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+			pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+		if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+					SCRATCH_PAD3_SMF_ENABLED)
+			pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+		if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+					SCRATCH_PAD3_SMA_ENABLED)
+			pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+		if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+					SCRATCH_PAD3_SMB_ENABLED)
+			pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+		PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+			"Encryption: SCRATCH_PAD3_DIS_ERR 0x%08X."
+			"Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
+			scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
+			pm8001_ha->encrypt_info.sec_mode,
+			pm8001_ha->encrypt_info.status));
+	} else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+				 SCRATCH_PAD3_ENC_ENA_ERR) {
+
+		pm8001_ha->encrypt_info.status =
+			(scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16;
+		if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+			pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+		if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+					SCRATCH_PAD3_SMF_ENABLED)
+			pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+		if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+					SCRATCH_PAD3_SMA_ENABLED)
+			pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+		if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+					SCRATCH_PAD3_SMB_ENABLED)
+			pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+
+		PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+			"Encryption: SCRATCH_PAD3_ENA_ERR 0x%08X."
+			"Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
+			scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
+			pm8001_ha->encrypt_info.sec_mode,
+			pm8001_ha->encrypt_info.status));
+	}
+	return ret;
+}
+
+/**
+ * pm80xx_encrypt_update - update flash with encryption informtion
+ * @pm8001_ha: our hba card information.
+ */
+static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
+{
+	struct kek_mgmt_req payload;
+	struct inbound_queue_table *circularQ;
+	int rc;
+	u32 tag;
+	u32 opc = OPC_INB_KEK_MANAGEMENT;
+
+	memset(&payload, 0, sizeof(struct kek_mgmt_req));
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+	if (rc)
+		return -1;
+
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	payload.tag = cpu_to_le32(tag);
+	/* Currently only one key is used. New KEK index is 1.
+	 * Current KEK index is 1. Store KEK to NVRAM is 1.
+	 */
+	payload.new_curidx_ksop = ((1 << 24) | (1 << 16) | (1 << 8) |
+					KEK_MGMT_SUBOP_KEYCARDUPDATE);
+
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	if (rc)
+		pm8001_tag_free(pm8001_ha, tag);
+
+	return rc;
+}
+
+/**
+ * pm8001_chip_init - the main init function that initialize whole PM8001 chip.
+ * @pm8001_ha: our hba card information
+ */
+static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
+{
+	int ret;
+	u8 i = 0;
+
+	/* check the firmware status */
+	if (-1 == check_fw_ready(pm8001_ha)) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Firmware is not ready!\n"));
+		return -EBUSY;
+	}
+
+	/* Initialize pci space address eg: mpi offset */
+	init_pci_device_addresses(pm8001_ha);
+	init_default_table_values(pm8001_ha);
+	read_main_config_table(pm8001_ha);
+	read_general_status_table(pm8001_ha);
+	read_inbnd_queue_table(pm8001_ha);
+	read_outbnd_queue_table(pm8001_ha);
+	read_phy_attr_table(pm8001_ha);
+
+	/* update main config table ,inbound table and outbound table */
+	update_main_config_table(pm8001_ha);
+	for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++)
+		update_inbnd_queue_table(pm8001_ha, i);
+	for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++)
+		update_outbnd_queue_table(pm8001_ha, i);
+
+	/* notify firmware update finished and check initialization status */
+	if (0 == mpi_init_check(pm8001_ha)) {
+		PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("MPI initialize successful!\n"));
+	} else
+		return -EBUSY;
+
+	/* send SAS protocol timer configuration page to FW */
+	ret = pm80xx_set_sas_protocol_timer_config(pm8001_ha);
+
+	/* Check for encryption */
+	if (pm8001_ha->chip->encrypt) {
+		PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("Checking for encryption\n"));
+		ret = pm80xx_get_encrypt_info(pm8001_ha);
+		if (ret == -1) {
+			PM8001_INIT_DBG(pm8001_ha,
+				pm8001_printk("Encryption error !!\n"));
+			if (pm8001_ha->encrypt_info.status == 0x81) {
+				PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+					"Encryption enabled with error."
+					"Saving encryption key to flash\n"));
+				pm80xx_encrypt_update(pm8001_ha);
+			}
+		}
+	}
+	return 0;
+}
+
+static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 max_wait_count;
+	u32 value;
+	u32 gst_len_mpistate;
+	init_pci_device_addresses(pm8001_ha);
+	/* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the
+	table is stop */
+	pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_RESET);
+
+	/* wait until Inbound DoorBell Clear Register toggled */
+	if (IS_SPCV_12G(pm8001_ha->pdev)) {
+		max_wait_count = 4 * 1000 * 1000;/* 4 sec */
+	} else {
+		max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+	}
+	do {
+		udelay(1);
+		value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+		value &= SPCv_MSGU_CFG_TABLE_RESET;
+	} while ((value != 0) && (--max_wait_count));
+
+	if (!max_wait_count) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("TIMEOUT:IBDB value/=%x\n", value));
+		return -1;
+	}
+
+	/* check the MPI-State for termination in progress */
+	/* wait until Inbound DoorBell Clear Register toggled */
+	max_wait_count = 2 * 1000 * 1000;	/* 2 sec for spcv/ve */
+	do {
+		udelay(1);
+		gst_len_mpistate =
+			pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+			GST_GSTLEN_MPIS_OFFSET);
+		if (GST_MPI_STATE_UNINIT ==
+			(gst_len_mpistate & GST_MPI_STATE_MASK))
+			break;
+	} while (--max_wait_count);
+	if (!max_wait_count) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk(" TIME OUT MPI State = 0x%x\n",
+				gst_len_mpistate & GST_MPI_STATE_MASK));
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all
+ * the FW register status to the originated status.
+ * @pm8001_ha: our hba card information
+ */
+
+static int
+pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 regval;
+	u32 bootloader_state;
+	u32 ibutton0, ibutton1;
+
+	/* Check if MPI is in ready state to reset */
+	if (mpi_uninit_check(pm8001_ha) != 0) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("MPI state is not ready\n"));
+		return -1;
+	}
+
+	/* checked for reset register normal state; 0x0 */
+	regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("reset register before write : 0x%x\n", regval));
+
+	pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, SPCv_NORMAL_RESET_VALUE);
+	mdelay(500);
+
+	regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
+	PM8001_INIT_DBG(pm8001_ha,
+	pm8001_printk("reset register after write 0x%x\n", regval));
+
+	if ((regval & SPCv_SOFT_RESET_READ_MASK) ==
+			SPCv_SOFT_RESET_NORMAL_RESET_OCCURED) {
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" soft reset successful [regval: 0x%x]\n",
+					regval));
+	} else {
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" soft reset failed [regval: 0x%x]\n",
+					regval));
+
+		/* check bootloader is successfully executed or in HDA mode */
+		bootloader_state =
+			pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1) &
+			SCRATCH_PAD1_BOOTSTATE_MASK;
+
+		if (bootloader_state == SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM) {
+			PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+				"Bootloader state - HDA mode SEEPROM\n"));
+		} else if (bootloader_state ==
+				SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP) {
+			PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+				"Bootloader state - HDA mode Bootstrap Pin\n"));
+		} else if (bootloader_state ==
+				SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET) {
+			PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+				"Bootloader state - HDA mode soft reset\n"));
+		} else if (bootloader_state ==
+					SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR) {
+			PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+				"Bootloader state-HDA mode critical error\n"));
+		}
+		return -EBUSY;
+	}
+
+	/* check the firmware status after reset */
+	if (-1 == check_fw_ready(pm8001_ha)) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Firmware is not ready!\n"));
+		/* check iButton feature support for motherboard controller */
+		if (pm8001_ha->pdev->subsystem_vendor !=
+			PCI_VENDOR_ID_ADAPTEC2 &&
+			pm8001_ha->pdev->subsystem_vendor != 0) {
+			ibutton0 = pm8001_cr32(pm8001_ha, 0,
+					MSGU_HOST_SCRATCH_PAD_6);
+			ibutton1 = pm8001_cr32(pm8001_ha, 0,
+					MSGU_HOST_SCRATCH_PAD_7);
+			if (!ibutton0 && !ibutton1) {
+				PM8001_FAIL_DBG(pm8001_ha,
+					pm8001_printk("iButton Feature is"
+					" not Available!!!\n"));
+				return -EBUSY;
+			}
+			if (ibutton0 == 0xdeadbeef && ibutton1 == 0xdeadbeef) {
+				PM8001_FAIL_DBG(pm8001_ha,
+					pm8001_printk("CRC Check for iButton"
+					" Feature Failed!!!\n"));
+				return -EBUSY;
+			}
+		}
+	}
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("SPCv soft reset Complete\n"));
+	return 0;
+}
+
+static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
+{
+	 u32 i;
+
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("chip reset start\n"));
+
+	/* do SPCv chip reset. */
+	pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, 0x11);
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("SPC soft reset Complete\n"));
+
+	/* Check this ..whether delay is required or no */
+	/* delay 10 usec */
+	udelay(10);
+
+	/* wait for 20 msec until the firmware gets reloaded */
+	i = 20;
+	do {
+		mdelay(1);
+	} while ((--i) != 0);
+
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("chip reset finished\n"));
+}
+
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
+{
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+}
+
+/**
+ * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
+{
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, ODMR_MASK_ALL);
+}
+
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+	u32 mask;
+	mask = (u32)(1 << vec);
+
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, (u32)(mask & 0xFFFFFFFF));
+	return;
+#endif
+	pm80xx_chip_intx_interrupt_enable(pm8001_ha);
+
+}
+
+/**
+ * pm8001_chip_interrupt_disable- disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+	u32 mask;
+	if (vec == 0xFF)
+		mask = 0xFFFFFFFF;
+	else
+		mask = (u32)(1 << vec);
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, (u32)(mask & 0xFFFFFFFF));
+	return;
+#endif
+	pm80xx_chip_intx_interrupt_disable(pm8001_ha);
+}
+
+static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_device *pm8001_ha_dev)
+{
+	int res;
+	u32 ccb_tag;
+	struct pm8001_ccb_info *ccb;
+	struct sas_task *task = NULL;
+	struct task_abort_req task_abort;
+	struct inbound_queue_table *circularQ;
+	u32 opc = OPC_INB_SATA_ABORT;
+	int ret;
+
+	if (!pm8001_ha_dev) {
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n"));
+		return;
+	}
+
+	task = sas_alloc_slow_task(GFP_ATOMIC);
+
+	if (!task) {
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot "
+						"allocate task\n"));
+		return;
+	}
+
+	task->task_done = pm8001_task_done;
+
+	res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+	if (res) {
+		sas_free_task(task);
+		return;
+	}
+
+	ccb = &pm8001_ha->ccb_info[ccb_tag];
+	ccb->device = pm8001_ha_dev;
+	ccb->ccb_tag = ccb_tag;
+	ccb->task = task;
+
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+	memset(&task_abort, 0, sizeof(task_abort));
+	task_abort.abort_all = cpu_to_le32(1);
+	task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+	task_abort.tag = cpu_to_le32(ccb_tag);
+
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort, 0);
+	if (ret) {
+		sas_free_task(task);
+		pm8001_tag_free(pm8001_ha, ccb_tag);
+	}
+}
+
+static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_device *pm8001_ha_dev)
+{
+	struct sata_start_req sata_cmd;
+	int res;
+	u32 ccb_tag;
+	struct pm8001_ccb_info *ccb;
+	struct sas_task *task = NULL;
+	struct host_to_dev_fis fis;
+	struct domain_device *dev;
+	struct inbound_queue_table *circularQ;
+	u32 opc = OPC_INB_SATA_HOST_OPSTART;
+
+	task = sas_alloc_slow_task(GFP_ATOMIC);
+
+	if (!task) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("cannot allocate task !!!\n"));
+		return;
+	}
+	task->task_done = pm8001_task_done;
+
+	res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+	if (res) {
+		sas_free_task(task);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("cannot allocate tag !!!\n"));
+		return;
+	}
+
+	/* allocate domain device by ourselves as libsas
+	 * is not going to provide any
+	*/
+	dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC);
+	if (!dev) {
+		sas_free_task(task);
+		pm8001_tag_free(pm8001_ha, ccb_tag);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("Domain device cannot be allocated\n"));
+		return;
+	}
+
+	task->dev = dev;
+	task->dev->lldd_dev = pm8001_ha_dev;
+
+	ccb = &pm8001_ha->ccb_info[ccb_tag];
+	ccb->device = pm8001_ha_dev;
+	ccb->ccb_tag = ccb_tag;
+	ccb->task = task;
+	pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
+	pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
+
+	memset(&sata_cmd, 0, sizeof(sata_cmd));
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+	/* construct read log FIS */
+	memset(&fis, 0, sizeof(struct host_to_dev_fis));
+	fis.fis_type = 0x27;
+	fis.flags = 0x80;
+	fis.command = ATA_CMD_READ_LOG_EXT;
+	fis.lbal = 0x10;
+	fis.sector_count = 0x1;
+
+	sata_cmd.tag = cpu_to_le32(ccb_tag);
+	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+	sata_cmd.ncqtag_atap_dir_m_dad |= ((0x1 << 7) | (0x5 << 9));
+	memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
+
+	res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, 0);
+	if (res) {
+		sas_free_task(task);
+		pm8001_tag_free(pm8001_ha, ccb_tag);
+		kfree(dev);
+	}
+}
+
+/**
+ * mpi_ssp_completion- process the event that FW response to the SSP request.
+ * @pm8001_ha: our hba card information
+ * @piomb: the message contents of this outbound message.
+ *
+ * When FW has completed a ssp request for example a IO request, after it has
+ * filled the SG data with the data, it will trigger this event represent
+ * that he has finished the job,please check the coresponding buffer.
+ * So we will tell the caller who maybe waiting the result to tell upper layer
+ * that the task has been finished.
+ */
+static void
+mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+	struct sas_task *t;
+	struct pm8001_ccb_info *ccb;
+	unsigned long flags;
+	u32 status;
+	u32 param;
+	u32 tag;
+	struct ssp_completion_resp *psspPayload;
+	struct task_status_struct *ts;
+	struct ssp_response_iu *iu;
+	struct pm8001_device *pm8001_dev;
+	psspPayload = (struct ssp_completion_resp *)(piomb + 4);
+	status = le32_to_cpu(psspPayload->status);
+	tag = le32_to_cpu(psspPayload->tag);
+	ccb = &pm8001_ha->ccb_info[tag];
+	if ((status == IO_ABORTED) && ccb->open_retry) {
+		/* Being completed by another */
+		ccb->open_retry = 0;
+		return;
+	}
+	pm8001_dev = ccb->device;
+	param = le32_to_cpu(psspPayload->param);
+	t = ccb->task;
+
+	if (status && status != IO_UNDERFLOW)
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("sas IO status 0x%x\n", status));
+	if (unlikely(!t || !t->lldd_task || !t->dev))
+		return;
+	ts = &t->task_status;
+	/* Print sas address of IO failed device */
+	if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+		(status != IO_UNDERFLOW))
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("SAS Address of IO Failure Drive"
+			":%016llx", SAS_ADDR(t->dev->sas_addr)));
+
+	switch (status) {
+	case IO_SUCCESS:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_SUCCESS ,param = 0x%x\n",
+				param));
+		if (param == 0) {
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAM_STAT_GOOD;
+		} else {
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAS_PROTO_RESPONSE;
+			ts->residual = param;
+			iu = &psspPayload->ssp_resp_iu;
+			sas_ssp_task_response(pm8001_ha->dev, t, iu);
+		}
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_ABORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_ABORTED IOMB Tag\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_ABORTED_TASK;
+		break;
+	case IO_UNDERFLOW:
+		/* SSP Completion with error */
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_UNDERFLOW ,param = 0x%x\n",
+				param));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_UNDERRUN;
+		ts->residual = param;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_NO_DEVICE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_NO_DEVICE\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_PHY_DOWN;
+		break;
+	case IO_XFER_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		/* Force the midlayer to retry */
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_XFER_ERROR_PHY_NOT_READY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_EPROTO;
+		break;
+	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+	case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		if (!t->uldd_task)
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+		break;
+	case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+		break;
+	case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		break;
+	case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		break;
+	case IO_XFER_ERROR_NAK_RECEIVED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_ERROR_DMA:
+		PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("IO_XFER_ERROR_DMA\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_XFER_OPEN_RETRY_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_XFER_ERROR_OFFSET_MISMATCH:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_PORT_IN_RESET:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_PORT_IN_RESET\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_DS_NON_OPERATIONAL:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		if (!t->uldd_task)
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_DS_NON_OPERATIONAL);
+		break;
+	case IO_DS_IN_RECOVERY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_IN_RECOVERY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_TM_TAG_NOT_FOUND:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	default:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("Unknown status 0x%x\n", status));
+		/* not allowed case. Therefore, return failed status */
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		break;
+	}
+	PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("scsi_status = 0x%x\n ",
+		psspPayload->ssp_resp_iu.status));
+	spin_lock_irqsave(&t->task_state_lock, flags);
+	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+	t->task_state_flags |= SAS_TASK_STATE_DONE;
+	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+			"task 0x%p done with io_status 0x%x resp 0x%x "
+			"stat 0x%x but aborted by upper layer!\n",
+			t, status, ts->resp, ts->stat));
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+	} else {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+		mb();/* in order to force CPU ordering */
+		t->task_done(t);
+	}
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+	struct sas_task *t;
+	unsigned long flags;
+	struct task_status_struct *ts;
+	struct pm8001_ccb_info *ccb;
+	struct pm8001_device *pm8001_dev;
+	struct ssp_event_resp *psspPayload =
+		(struct ssp_event_resp *)(piomb + 4);
+	u32 event = le32_to_cpu(psspPayload->event);
+	u32 tag = le32_to_cpu(psspPayload->tag);
+	u32 port_id = le32_to_cpu(psspPayload->port_id);
+
+	ccb = &pm8001_ha->ccb_info[tag];
+	t = ccb->task;
+	pm8001_dev = ccb->device;
+	if (event)
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("sas IO status 0x%x\n", event));
+	if (unlikely(!t || !t->lldd_task || !t->dev))
+		return;
+	ts = &t->task_status;
+	PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n",
+				port_id, tag, event));
+	switch (event) {
+	case IO_OVERFLOW:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");)
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		ts->residual = 0;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_XFER_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+		pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK);
+		return;
+	case IO_XFER_ERROR_PHY_NOT_READY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_EPROTO;
+		break;
+	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+	case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		if (!t->uldd_task)
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+		break;
+	case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+		break;
+	case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		break;
+	case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		break;
+	case IO_XFER_ERROR_NAK_RECEIVED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_OPEN_RETRY_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+		pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT);
+		return;
+	case IO_XFER_ERROR_UNEXPECTED_PHASE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_ERROR_OFFSET_MISMATCH:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
+		/* TBC: used default set values */
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	case IO_XFER_CMD_FRAME_ISSUED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+		return;
+	default:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("Unknown status 0x%x\n", event));
+		/* not allowed case. Therefore, return failed status */
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		break;
+	}
+	spin_lock_irqsave(&t->task_state_lock, flags);
+	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+	t->task_state_flags |= SAS_TASK_STATE_DONE;
+	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+			"task 0x%p done with event 0x%x resp 0x%x "
+			"stat 0x%x but aborted by upper layer!\n",
+			t, event, ts->resp, ts->stat));
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+	} else {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+		mb();/* in order to force CPU ordering */
+		t->task_done(t);
+	}
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct sas_task *t;
+	struct pm8001_ccb_info *ccb;
+	u32 param;
+	u32 status;
+	u32 tag;
+	int i, j;
+	u8 sata_addr_low[4];
+	u32 temp_sata_addr_low, temp_sata_addr_hi;
+	u8 sata_addr_hi[4];
+	struct sata_completion_resp *psataPayload;
+	struct task_status_struct *ts;
+	struct ata_task_resp *resp ;
+	u32 *sata_resp;
+	struct pm8001_device *pm8001_dev;
+	unsigned long flags;
+
+	psataPayload = (struct sata_completion_resp *)(piomb + 4);
+	status = le32_to_cpu(psataPayload->status);
+	tag = le32_to_cpu(psataPayload->tag);
+
+	if (!tag) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("tag null\n"));
+		return;
+	}
+	ccb = &pm8001_ha->ccb_info[tag];
+	param = le32_to_cpu(psataPayload->param);
+	if (ccb) {
+		t = ccb->task;
+		pm8001_dev = ccb->device;
+	} else {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("ccb null\n"));
+		return;
+	}
+
+	if (t) {
+		if (t->dev && (t->dev->lldd_dev))
+			pm8001_dev = t->dev->lldd_dev;
+	} else {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("task null\n"));
+		return;
+	}
+
+	if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
+		&& unlikely(!t || !t->lldd_task || !t->dev)) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("task or dev null\n"));
+		return;
+	}
+
+	ts = &t->task_status;
+	if (!ts) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("ts null\n"));
+		return;
+	}
+	/* Print sas address of IO failed device */
+	if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+		(status != IO_UNDERFLOW)) {
+		if (!((t->dev->parent) &&
+			(DEV_IS_EXPANDER(t->dev->parent->dev_type)))) {
+			for (i = 0 , j = 4; i <= 3 && j <= 7; i++ , j++)
+				sata_addr_low[i] = pm8001_ha->sas_addr[j];
+			for (i = 0 , j = 0; i <= 3 && j <= 3; i++ , j++)
+				sata_addr_hi[i] = pm8001_ha->sas_addr[j];
+			memcpy(&temp_sata_addr_low, sata_addr_low,
+				sizeof(sata_addr_low));
+			memcpy(&temp_sata_addr_hi, sata_addr_hi,
+				sizeof(sata_addr_hi));
+			temp_sata_addr_hi = (((temp_sata_addr_hi >> 24) & 0xff)
+						|((temp_sata_addr_hi << 8) &
+						0xff0000) |
+						((temp_sata_addr_hi >> 8)
+						& 0xff00) |
+						((temp_sata_addr_hi << 24) &
+						0xff000000));
+			temp_sata_addr_low = ((((temp_sata_addr_low >> 24)
+						& 0xff) |
+						((temp_sata_addr_low << 8)
+						& 0xff0000) |
+						((temp_sata_addr_low >> 8)
+						& 0xff00) |
+						((temp_sata_addr_low << 24)
+						& 0xff000000)) +
+						pm8001_dev->attached_phy +
+						0x10);
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("SAS Address of IO Failure Drive:"
+				"%08x%08x", temp_sata_addr_hi,
+					temp_sata_addr_low));
+
+		} else {
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("SAS Address of IO Failure Drive:"
+				"%016llx", SAS_ADDR(t->dev->sas_addr)));
+		}
+	}
+	switch (status) {
+	case IO_SUCCESS:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+		if (param == 0) {
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAM_STAT_GOOD;
+			/* check if response is for SEND READ LOG */
+			if (pm8001_dev &&
+				(pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
+				/* set new bit for abort_all */
+				pm8001_dev->id |= NCQ_ABORT_ALL_FLAG;
+				/* clear bit for read log */
+				pm8001_dev->id = pm8001_dev->id & 0x7FFFFFFF;
+				pm80xx_send_abort_all(pm8001_ha, pm8001_dev);
+				/* Free the tag */
+				pm8001_tag_free(pm8001_ha, tag);
+				sas_free_task(t);
+				return;
+			}
+		} else {
+			u8 len;
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAS_PROTO_RESPONSE;
+			ts->residual = param;
+			PM8001_IO_DBG(pm8001_ha,
+				pm8001_printk("SAS_PROTO_RESPONSE len = %d\n",
+				param));
+			sata_resp = &psataPayload->sata_resp[0];
+			resp = (struct ata_task_resp *)ts->buf;
+			if (t->ata_task.dma_xfer == 0 &&
+			t->data_dir == PCI_DMA_FROMDEVICE) {
+				len = sizeof(struct pio_setup_fis);
+				PM8001_IO_DBG(pm8001_ha,
+				pm8001_printk("PIO read len = %d\n", len));
+			} else if (t->ata_task.use_ncq) {
+				len = sizeof(struct set_dev_bits_fis);
+				PM8001_IO_DBG(pm8001_ha,
+					pm8001_printk("FPDMA len = %d\n", len));
+			} else {
+				len = sizeof(struct dev_to_host_fis);
+				PM8001_IO_DBG(pm8001_ha,
+				pm8001_printk("other len = %d\n", len));
+			}
+			if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
+				resp->frame_len = len;
+				memcpy(&resp->ending_fis[0], sata_resp, len);
+				ts->buf_valid_size = sizeof(*resp);
+			} else
+				PM8001_IO_DBG(pm8001_ha,
+					pm8001_printk("response to large\n"));
+		}
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_ABORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_ABORTED IOMB Tag\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_ABORTED_TASK;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+		/* following cases are to do cases */
+	case IO_UNDERFLOW:
+		/* SATA Completion with error */
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_UNDERFLOW param = %d\n", param));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_UNDERRUN;
+		ts->residual = param;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_NO_DEVICE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_NO_DEVICE\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_PHY_DOWN;
+		break;
+	case IO_XFER_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_INTERRUPTED;
+		break;
+	case IO_XFER_ERROR_PHY_NOT_READY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_EPROTO;
+		break;
+	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+		break;
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+	case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+			ts->resp = SAS_TASK_UNDELIVERED;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+			ts->resp = SAS_TASK_UNDELIVERED;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		break;
+	case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY);
+			ts->resp = SAS_TASK_UNDELIVERED;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		break;
+	case IO_XFER_ERROR_NAK_RECEIVED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_ERROR_DMA:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_DMA\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_ABORTED_TASK;
+		break;
+	case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_UNDERRUN;
+		break;
+	case IO_XFER_OPEN_RETRY_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_PORT_IN_RESET:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_PORT_IN_RESET\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	case IO_DS_NON_OPERATIONAL:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha, pm8001_dev,
+					IO_DS_NON_OPERATIONAL);
+			ts->resp = SAS_TASK_UNDELIVERED;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_DS_IN_RECOVERY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_IN_RECOVERY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	case IO_DS_IN_ERROR:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_IN_ERROR\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha, pm8001_dev,
+					IO_DS_IN_ERROR);
+			ts->resp = SAS_TASK_UNDELIVERED;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+	default:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("Unknown status 0x%x\n", status));
+		/* not allowed case. Therefore, return failed status */
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	}
+	spin_lock_irqsave(&t->task_state_lock, flags);
+	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+	t->task_state_flags |= SAS_TASK_STATE_DONE;
+	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("task 0x%p done with io_status 0x%x"
+			" resp 0x%x stat 0x%x but aborted by upper layer!\n",
+			t, status, ts->resp, ts->stat));
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+	} else {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+	}
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+	struct sas_task *t;
+	struct task_status_struct *ts;
+	struct pm8001_ccb_info *ccb;
+	struct pm8001_device *pm8001_dev;
+	struct sata_event_resp *psataPayload =
+		(struct sata_event_resp *)(piomb + 4);
+	u32 event = le32_to_cpu(psataPayload->event);
+	u32 tag = le32_to_cpu(psataPayload->tag);
+	u32 port_id = le32_to_cpu(psataPayload->port_id);
+	u32 dev_id = le32_to_cpu(psataPayload->device_id);
+	unsigned long flags;
+
+	ccb = &pm8001_ha->ccb_info[tag];
+
+	if (ccb) {
+		t = ccb->task;
+		pm8001_dev = ccb->device;
+	} else {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("No CCB !!!. returning\n"));
+		return;
+	}
+	if (event)
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("SATA EVENT 0x%x\n", event));
+
+	/* Check if this is NCQ error */
+	if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
+		/* find device using device id */
+		pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
+		/* send read log extension */
+		if (pm8001_dev)
+			pm80xx_send_read_log(pm8001_ha, pm8001_dev);
+		return;
+	}
+
+	if (unlikely(!t || !t->lldd_task || !t->dev)) {
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("task or dev null\n"));
+		return;
+	}
+
+	ts = &t->task_status;
+	PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n",
+				port_id, tag, event));
+	switch (event) {
+	case IO_OVERFLOW:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		ts->residual = 0;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_XFER_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_INTERRUPTED;
+		break;
+	case IO_XFER_ERROR_PHY_NOT_READY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_EPROTO;
+		break;
+	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+		break;
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+	case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		if (!t->uldd_task) {
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAS_QUEUE_FULL;
+			pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+			return;
+		}
+		break;
+	case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+		ts->resp = SAS_TASK_UNDELIVERED;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+		break;
+	case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		break;
+	case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		break;
+	case IO_XFER_ERROR_NAK_RECEIVED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_ERROR_PEER_ABORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_NAK_R_ERR;
+		break;
+	case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_UNDERRUN;
+		break;
+	case IO_XFER_OPEN_RETRY_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_ERROR_UNEXPECTED_PHASE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_ERROR_OFFSET_MISMATCH:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_CMD_FRAME_ISSUED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+		break;
+	case IO_XFER_PIO_SETUP_ERROR:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
+		/* TBC: used default set values */
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	case IO_XFER_DMA_ACTIVATE_TIMEOUT:
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("IO_XFR_DMA_ACTIVATE_TIMEOUT\n"));
+		/* TBC: used default set values */
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	default:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("Unknown status 0x%x\n", event));
+		/* not allowed case. Therefore, return failed status */
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_TO;
+		break;
+	}
+	spin_lock_irqsave(&t->task_state_lock, flags);
+	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+	t->task_state_flags |= SAS_TASK_STATE_DONE;
+	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("task 0x%p done with io_status 0x%x"
+			" resp 0x%x stat 0x%x but aborted by upper layer!\n",
+			t, event, ts->resp, ts->stat));
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+	} else {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+	}
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	u32 param, i;
+	struct sas_task *t;
+	struct pm8001_ccb_info *ccb;
+	unsigned long flags;
+	u32 status;
+	u32 tag;
+	struct smp_completion_resp *psmpPayload;
+	struct task_status_struct *ts;
+	struct pm8001_device *pm8001_dev;
+	char *pdma_respaddr = NULL;
+
+	psmpPayload = (struct smp_completion_resp *)(piomb + 4);
+	status = le32_to_cpu(psmpPayload->status);
+	tag = le32_to_cpu(psmpPayload->tag);
+
+	ccb = &pm8001_ha->ccb_info[tag];
+	param = le32_to_cpu(psmpPayload->param);
+	t = ccb->task;
+	ts = &t->task_status;
+	pm8001_dev = ccb->device;
+	if (status)
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("smp IO status 0x%x\n", status));
+	if (unlikely(!t || !t->lldd_task || !t->dev))
+		return;
+
+	switch (status) {
+
+	case IO_SUCCESS:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAM_STAT_GOOD;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
+			PM8001_IO_DBG(pm8001_ha,
+				pm8001_printk("DIRECT RESPONSE Length:%d\n",
+						param));
+			pdma_respaddr = (char *)(phys_to_virt(cpu_to_le64
+						((u64)sg_dma_address
+						(&t->smp_task.smp_resp))));
+			for (i = 0; i < param; i++) {
+				*(pdma_respaddr+i) = psmpPayload->_r_a[i];
+				PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+					"SMP Byte%d DMA data 0x%x psmp 0x%x\n",
+					i, *(pdma_respaddr+i),
+					psmpPayload->_r_a[i]));
+			}
+		}
+		break;
+	case IO_ABORTED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_ABORTED IOMB\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_ABORTED_TASK;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_OVERFLOW:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DATA_OVERRUN;
+		ts->residual = 0;
+		if (pm8001_dev)
+			pm8001_dev->running_req--;
+		break;
+	case IO_NO_DEVICE:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_PHY_DOWN;
+		break;
+	case IO_ERROR_HW_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_ERROR_HW_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAM_STAT_BUSY;
+		break;
+	case IO_XFER_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAM_STAT_BUSY;
+		break;
+	case IO_XFER_ERROR_PHY_NOT_READY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAM_STAT_BUSY;
+		break;
+	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		break;
+	case IO_OPEN_CNX_ERROR_BREAK:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+		break;
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+	case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+		pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+		break;
+	case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+		break;
+	case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(\
+			"IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+		break;
+	case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+		break;
+	case IO_XFER_ERROR_RX_FRAME:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_RX_FRAME\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	case IO_XFER_OPEN_RETRY_TIMEOUT:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_ERROR_INTERNAL_SMP_RESOURCE:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_QUEUE_FULL;
+		break;
+	case IO_PORT_IN_RESET:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_PORT_IN_RESET\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_DS_NON_OPERATIONAL:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		break;
+	case IO_DS_IN_RECOVERY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_DS_IN_RECOVERY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
+	default:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("Unknown status 0x%x\n", status));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_DEV_NO_RESPONSE;
+		/* not allowed case. Therefore, return failed status */
+		break;
+	}
+	spin_lock_irqsave(&t->task_state_lock, flags);
+	t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+	t->task_state_flags |= SAS_TASK_STATE_DONE;
+	if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+			"task 0x%p done with io_status 0x%x resp 0x%x"
+			"stat 0x%x but aborted by upper layer!\n",
+			t, status, ts->resp, ts->stat));
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+	} else {
+		spin_unlock_irqrestore(&t->task_state_lock, flags);
+		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+		mb();/* in order to force CPU ordering */
+		t->task_done(t);
+	}
+}
+
+/**
+ * pm80xx_hw_event_ack_req- For PM8001,some events need to acknowage to FW.
+ * @pm8001_ha: our hba card information
+ * @Qnum: the outbound queue message number.
+ * @SEA: source of event to ack
+ * @port_id: port id.
+ * @phyId: phy id.
+ * @param0: parameter 0.
+ * @param1: parameter 1.
+ */
+static void pm80xx_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
+	u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0, u32 param1)
+{
+	struct hw_event_ack_req	 payload;
+	u32 opc = OPC_INB_SAS_HW_EVENT_ACK;
+
+	struct inbound_queue_table *circularQ;
+
+	memset((u8 *)&payload, 0, sizeof(payload));
+	circularQ = &pm8001_ha->inbnd_q_tbl[Qnum];
+	payload.tag = cpu_to_le32(1);
+	payload.phyid_sea_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) |
+		((phyId & 0xFF) << 24) | (port_id & 0xFF));
+	payload.param0 = cpu_to_le32(param0);
+	payload.param1 = cpu_to_le32(param1);
+	pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+}
+
+static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+	u32 phyId, u32 phy_op);
+
+/**
+ * hw_event_sas_phy_up -FW tells me a SAS phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct hw_event_resp *pPayload =
+		(struct hw_event_resp *)(piomb + 4);
+	u32 lr_status_evt_portid =
+		le32_to_cpu(pPayload->lr_status_evt_portid);
+	u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+
+	u8 link_rate =
+		(u8)((lr_status_evt_portid & 0xF0000000) >> 28);
+	u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+	u8 phy_id =
+		(u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+	u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+	struct pm8001_port *port = &pm8001_ha->port[port_id];
+	struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+	unsigned long flags;
+	u8 deviceType = pPayload->sas_identify.dev_type;
+	port->port_state = portstate;
+	phy->phy_state = PHY_STATE_LINK_UP_SPCV;
+	PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+		"portid:%d; phyid:%d; linkrate:%d; "
+		"portstate:%x; devicetype:%x\n",
+		port_id, phy_id, link_rate, portstate, deviceType));
+
+	switch (deviceType) {
+	case SAS_PHY_UNUSED:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("device type no device.\n"));
+		break;
+	case SAS_END_DEVICE:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
+		pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id,
+			PHY_NOTIFY_ENABLE_SPINUP);
+		port->port_attached = 1;
+		pm8001_get_lrate_mode(phy, link_rate);
+		break;
+	case SAS_EDGE_EXPANDER_DEVICE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("expander device.\n"));
+		port->port_attached = 1;
+		pm8001_get_lrate_mode(phy, link_rate);
+		break;
+	case SAS_FANOUT_EXPANDER_DEVICE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("fanout expander device.\n"));
+		port->port_attached = 1;
+		pm8001_get_lrate_mode(phy, link_rate);
+		break;
+	default:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("unknown device type(%x)\n", deviceType));
+		break;
+	}
+	phy->phy_type |= PORT_TYPE_SAS;
+	phy->identify.device_type = deviceType;
+	phy->phy_attached = 1;
+	if (phy->identify.device_type == SAS_END_DEVICE)
+		phy->identify.target_port_protocols = SAS_PROTOCOL_SSP;
+	else if (phy->identify.device_type != SAS_PHY_UNUSED)
+		phy->identify.target_port_protocols = SAS_PROTOCOL_SMP;
+	phy->sas_phy.oob_mode = SAS_OOB_MODE;
+	sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+	spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+	memcpy(phy->frame_rcvd, &pPayload->sas_identify,
+		sizeof(struct sas_identify_frame)-4);
+	phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4;
+	pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+	if (pm8001_ha->flags == PM8001F_RUN_TIME)
+		mdelay(200);/*delay a moment to wait disk to spinup*/
+	pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_sata_phy_up -FW tells me a SATA phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct hw_event_resp *pPayload =
+		(struct hw_event_resp *)(piomb + 4);
+	u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+	u32 lr_status_evt_portid =
+		le32_to_cpu(pPayload->lr_status_evt_portid);
+	u8 link_rate =
+		(u8)((lr_status_evt_portid & 0xF0000000) >> 28);
+	u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+	u8 phy_id =
+		(u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+
+	u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+	struct pm8001_port *port = &pm8001_ha->port[port_id];
+	struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+	unsigned long flags;
+	PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+		"port id %d, phy id %d link_rate %d portstate 0x%x\n",
+				port_id, phy_id, link_rate, portstate));
+
+	port->port_state = portstate;
+	phy->phy_state = PHY_STATE_LINK_UP_SPCV;
+	port->port_attached = 1;
+	pm8001_get_lrate_mode(phy, link_rate);
+	phy->phy_type |= PORT_TYPE_SATA;
+	phy->phy_attached = 1;
+	phy->sas_phy.oob_mode = SATA_OOB_MODE;
+	sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+	spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+	memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4),
+		sizeof(struct dev_to_host_fis));
+	phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
+	phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
+	phy->identify.device_type = SAS_SATA_DEV;
+	pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+	pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_phy_down -we should notify the libsas the phy is down.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct hw_event_resp *pPayload =
+		(struct hw_event_resp *)(piomb + 4);
+
+	u32 lr_status_evt_portid =
+		le32_to_cpu(pPayload->lr_status_evt_portid);
+	u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+	u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+	u8 phy_id =
+		(u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+	u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+	struct pm8001_port *port = &pm8001_ha->port[port_id];
+	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+	port->port_state = portstate;
+	phy->phy_type = 0;
+	phy->identify.device_type = 0;
+	phy->phy_attached = 0;
+	memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE);
+	switch (portstate) {
+	case PORT_VALID:
+		break;
+	case PORT_INVALID:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" PortInvalid portID %d\n", port_id));
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" Last phy Down and port invalid\n"));
+		port->port_attached = 0;
+		pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+			port_id, phy_id, 0, 0);
+		break;
+	case PORT_IN_RESET:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" Port In Reset portID %d\n", port_id));
+		break;
+	case PORT_NOT_ESTABLISHED:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
+		port->port_attached = 0;
+		break;
+	case PORT_LOSTCOMM:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" Last phy Down and port invalid\n"));
+		port->port_attached = 0;
+		pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+			port_id, phy_id, 0, 0);
+		break;
+	default:
+		port->port_attached = 0;
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" phy Down and(default) = 0x%x\n",
+			portstate));
+		break;
+
+	}
+}
+
+static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct phy_start_resp *pPayload =
+		(struct phy_start_resp *)(piomb + 4);
+	u32 status =
+		le32_to_cpu(pPayload->status);
+	u32 phy_id =
+		le32_to_cpu(pPayload->phyid);
+	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("phy start resp status:0x%x, phyid:0x%x\n",
+				status, phy_id));
+	if (status == 0) {
+		phy->phy_state = 1;
+		if (pm8001_ha->flags == PM8001F_RUN_TIME)
+			complete(phy->enable_completion);
+	}
+	return 0;
+
+}
+
+/**
+ * mpi_thermal_hw_event -The hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct thermal_hw_event *pPayload =
+		(struct thermal_hw_event *)(piomb + 4);
+
+	u32 thermal_event = le32_to_cpu(pPayload->thermal_event);
+	u32 rht_lht = le32_to_cpu(pPayload->rht_lht);
+
+	if (thermal_event & 0x40) {
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"Thermal Event: Local high temperature violated!\n"));
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"Thermal Event: Measured local high temperature %d\n",
+				((rht_lht & 0xFF00) >> 8)));
+	}
+	if (thermal_event & 0x10) {
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"Thermal Event: Remote high temperature violated!\n"));
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"Thermal Event: Measured remote high temperature %d\n",
+				((rht_lht & 0xFF000000) >> 24)));
+	}
+	return 0;
+}
+
+/**
+ * mpi_hw_event -The hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	unsigned long flags;
+	struct hw_event_resp *pPayload =
+		(struct hw_event_resp *)(piomb + 4);
+	u32 lr_status_evt_portid =
+		le32_to_cpu(pPayload->lr_status_evt_portid);
+	u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+	u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+	u8 phy_id =
+		(u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+	u16 eventType =
+		(u16)((lr_status_evt_portid & 0x00FFFF00) >> 8);
+	u8 status =
+		(u8)((lr_status_evt_portid & 0x0F000000) >> 24);
+
+	struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+	struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+	PM8001_MSG_DBG(pm8001_ha,
+		pm8001_printk("portid:%d phyid:%d event:0x%x status:0x%x\n",
+				port_id, phy_id, eventType, status));
+
+	switch (eventType) {
+
+	case HW_EVENT_SAS_PHY_UP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PHY_START_STATUS\n"));
+		hw_event_sas_phy_up(pm8001_ha, piomb);
+		break;
+	case HW_EVENT_SATA_PHY_UP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_SATA_PHY_UP\n"));
+		hw_event_sata_phy_up(pm8001_ha, piomb);
+		break;
+	case HW_EVENT_SATA_SPINUP_HOLD:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n"));
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+		break;
+	case HW_EVENT_PHY_DOWN:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PHY_DOWN\n"));
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+		phy->phy_attached = 0;
+		phy->phy_state = 0;
+		hw_event_phy_down(pm8001_ha, piomb);
+		break;
+	case HW_EVENT_PORT_INVALID:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PORT_INVALID\n"));
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	/* the broadcast change primitive received, tell the LIBSAS this event
+	to revalidate the sas domain*/
+	case HW_EVENT_BROADCAST_CHANGE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n"));
+		pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
+			port_id, phy_id, 1, 0);
+		spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+		sas_phy->sas_prim = HW_EVENT_BROADCAST_CHANGE;
+		spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+		sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+		break;
+	case HW_EVENT_PHY_ERROR:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PHY_ERROR\n"));
+		sas_phy_disconnected(&phy->sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+		break;
+	case HW_EVENT_BROADCAST_EXP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_BROADCAST_EXP\n"));
+		spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+		sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
+		spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+		sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+		break;
+	case HW_EVENT_LINK_ERR_INVALID_DWORD:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
+		pm80xx_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"));
+		pm80xx_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_LINK_ERR_DISPARITY_ERROR,
+			port_id, phy_id, 0, 0);
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_LINK_ERR_CODE_VIOLATION:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n"));
+		pm80xx_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_LINK_ERR_CODE_VIOLATION,
+			port_id, phy_id, 0, 0);
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+				"HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"));
+		pm80xx_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
+			port_id, phy_id, 0, 0);
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_MALFUNCTION:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_MALFUNCTION\n"));
+		break;
+	case HW_EVENT_BROADCAST_SES:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_BROADCAST_SES\n"));
+		spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+		sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
+		spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+		sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+		break;
+	case HW_EVENT_INBOUND_CRC_ERROR:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n"));
+		pm80xx_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_INBOUND_CRC_ERROR,
+			port_id, phy_id, 0, 0);
+		break;
+	case HW_EVENT_HARD_RESET_RECEIVED:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n"));
+		sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
+		break;
+	case HW_EVENT_ID_FRAME_TIMEOUT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n"));
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n"));
+		pm80xx_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
+			port_id, phy_id, 0, 0);
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_PORT_RESET_TIMER_TMO:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n"));
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"));
+		pm80xx_hw_event_ack_req(pm8001_ha, 0,
+			HW_EVENT_PORT_RECOVERY_TIMER_TMO,
+			port_id, phy_id, 0, 0);
+		sas_phy_disconnected(sas_phy);
+		phy->phy_attached = 0;
+		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		break;
+	case HW_EVENT_PORT_RECOVER:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
+		break;
+	case HW_EVENT_PORT_RESET_COMPLETE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n"));
+		break;
+	case EVENT_BROADCAST_ASYNCH_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n"));
+		break;
+	default:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("Unknown event type 0x%x\n", eventType));
+		break;
+	}
+	return 0;
+}
+
+/**
+ * mpi_phy_stop_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_phy_stop_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	struct phy_stop_resp *pPayload =
+		(struct phy_stop_resp *)(piomb + 4);
+	u32 status =
+		le32_to_cpu(pPayload->status);
+	u32 phyid =
+		le32_to_cpu(pPayload->phyid);
+	struct pm8001_phy *phy = &pm8001_ha->phy[phyid];
+	PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("phy:0x%x status:0x%x\n",
+					phyid, status));
+	if (status == 0)
+		phy->phy_state = 0;
+	return 0;
+}
+
+/**
+ * mpi_set_controller_config_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_set_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
+			void *piomb)
+{
+	struct set_ctrl_cfg_resp *pPayload =
+			(struct set_ctrl_cfg_resp *)(piomb + 4);
+	u32 status = le32_to_cpu(pPayload->status);
+	u32 err_qlfr_pgcd = le32_to_cpu(pPayload->err_qlfr_pgcd);
+
+	PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n",
+			status, err_qlfr_pgcd));
+
+	return 0;
+}
+
+/**
+ * mpi_get_controller_config_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_get_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
+			void *piomb)
+{
+	PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" pm80xx_addition_functionality\n"));
+
+	return 0;
+}
+
+/**
+ * mpi_get_phy_profile_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_get_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
+			void *piomb)
+{
+	PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" pm80xx_addition_functionality\n"));
+
+	return 0;
+}
+
+/**
+ * mpi_flash_op_ext_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_flash_op_ext_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" pm80xx_addition_functionality\n"));
+
+	return 0;
+}
+
+/**
+ * mpi_set_phy_profile_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_set_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
+			void *piomb)
+{
+	u8 page_code;
+	struct set_phy_profile_resp *pPayload =
+		(struct set_phy_profile_resp *)(piomb + 4);
+	u32 ppc_phyid = le32_to_cpu(pPayload->ppc_phyid);
+	u32 status = le32_to_cpu(pPayload->status);
+
+	page_code = (u8)((ppc_phyid & 0xFF00) >> 8);
+	if (status) {
+		/* status is FAILED */
+		PM8001_FAIL_DBG(pm8001_ha,
+			pm8001_printk("PhyProfile command failed  with status "
+			"0x%08X \n", status));
+		return -1;
+	} else {
+		if (page_code != SAS_PHY_ANALOG_SETTINGS_PAGE) {
+			PM8001_FAIL_DBG(pm8001_ha,
+				pm8001_printk("Invalid page code 0x%X\n",
+					page_code));
+			return -1;
+		}
+	}
+	return 0;
+}
+
+/**
+ * mpi_kek_management_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_kek_management_resp(struct pm8001_hba_info *pm8001_ha,
+			void *piomb)
+{
+	struct kek_mgmt_resp *pPayload = (struct kek_mgmt_resp *)(piomb + 4);
+
+	u32 status = le32_to_cpu(pPayload->status);
+	u32 kidx_new_curr_ksop = le32_to_cpu(pPayload->kidx_new_curr_ksop);
+	u32 err_qlfr = le32_to_cpu(pPayload->err_qlfr);
+
+	PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+		"KEK MGMT RESP. Status 0x%x idx_ksop 0x%x err_qlfr 0x%x\n",
+		status, kidx_new_curr_ksop, err_qlfr));
+
+	return 0;
+}
+
+/**
+ * mpi_dek_management_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_dek_management_resp(struct pm8001_hba_info *pm8001_ha,
+			void *piomb)
+{
+	PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" pm80xx_addition_functionality\n"));
+
+	return 0;
+}
+
+/**
+ * ssp_coalesced_comp_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int ssp_coalesced_comp_resp(struct pm8001_hba_info *pm8001_ha,
+			void *piomb)
+{
+	PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk(" pm80xx_addition_functionality\n"));
+
+	return 0;
+}
+
+/**
+ * process_one_iomb - process one outbound Queue memory block
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+	__le32 pHeader = *(__le32 *)piomb;
+	u32 opc = (u32)((le32_to_cpu(pHeader)) & 0xFFF);
+
+	switch (opc) {
+	case OPC_OUB_ECHO:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n"));
+		break;
+	case OPC_OUB_HW_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_HW_EVENT\n"));
+		mpi_hw_event(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_THERM_HW_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_THERMAL_EVENT\n"));
+		mpi_thermal_hw_event(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SSP_COMP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SSP_COMP\n"));
+		mpi_ssp_completion(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SMP_COMP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SMP_COMP\n"));
+		mpi_smp_completion(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_LOCAL_PHY_CNTRL:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
+		pm8001_mpi_local_phy_ctl(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_DEV_REGIST:
+		PM8001_MSG_DBG(pm8001_ha,
+		pm8001_printk("OPC_OUB_DEV_REGIST\n"));
+		pm8001_mpi_reg_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_DEREG_DEV:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("unregister the device\n"));
+		pm8001_mpi_dereg_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_GET_DEV_HANDLE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n"));
+		break;
+	case OPC_OUB_SATA_COMP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SATA_COMP\n"));
+		mpi_sata_completion(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SATA_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SATA_EVENT\n"));
+		mpi_sata_event(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SSP_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SSP_EVENT\n"));
+		mpi_ssp_event(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_DEV_HANDLE_ARRIV:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n"));
+		/*This is for target*/
+		break;
+	case OPC_OUB_SSP_RECV_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n"));
+		/*This is for target*/
+		break;
+	case OPC_OUB_FW_FLASH_UPDATE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
+		pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_GPIO_RESPONSE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GPIO_RESPONSE\n"));
+		break;
+	case OPC_OUB_GPIO_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GPIO_EVENT\n"));
+		break;
+	case OPC_OUB_GENERAL_EVENT:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
+		pm8001_mpi_general_event(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SSP_ABORT_RSP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
+		pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SATA_ABORT_RSP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
+		pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SAS_DIAG_MODE_START_END:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n"));
+		break;
+	case OPC_OUB_SAS_DIAG_EXECUTE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n"));
+		break;
+	case OPC_OUB_GET_TIME_STAMP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GET_TIME_STAMP\n"));
+		break;
+	case OPC_OUB_SAS_HW_EVENT_ACK:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n"));
+		break;
+	case OPC_OUB_PORT_CONTROL:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_PORT_CONTROL\n"));
+		break;
+	case OPC_OUB_SMP_ABORT_RSP:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
+		pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_GET_NVMD_DATA:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
+		pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SET_NVMD_DATA:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
+		pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_DEVICE_HANDLE_REMOVAL:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n"));
+		break;
+	case OPC_OUB_SET_DEVICE_STATE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
+		pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_GET_DEVICE_STATE:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n"));
+		break;
+	case OPC_OUB_SET_DEV_INFO:
+		PM8001_MSG_DBG(pm8001_ha,
+			pm8001_printk("OPC_OUB_SET_DEV_INFO\n"));
+		break;
+	/* spcv specifc commands */
+	case OPC_OUB_PHY_START_RESP:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"OPC_OUB_PHY_START_RESP opcode:%x\n", opc));
+		mpi_phy_start_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_PHY_STOP_RESP:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"OPC_OUB_PHY_STOP_RESP opcode:%x\n", opc));
+		mpi_phy_stop_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SET_CONTROLLER_CONFIG:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"OPC_OUB_SET_CONTROLLER_CONFIG opcode:%x\n", opc));
+		mpi_set_controller_config_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_GET_CONTROLLER_CONFIG:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"OPC_OUB_GET_CONTROLLER_CONFIG opcode:%x\n", opc));
+		mpi_get_controller_config_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_GET_PHY_PROFILE:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"OPC_OUB_GET_PHY_PROFILE opcode:%x\n", opc));
+		mpi_get_phy_profile_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_FLASH_OP_EXT:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"OPC_OUB_FLASH_OP_EXT opcode:%x\n", opc));
+		mpi_flash_op_ext_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SET_PHY_PROFILE:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"OPC_OUB_SET_PHY_PROFILE opcode:%x\n", opc));
+		mpi_set_phy_profile_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_KEK_MANAGEMENT_RESP:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"OPC_OUB_KEK_MANAGEMENT_RESP opcode:%x\n", opc));
+		mpi_kek_management_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_DEK_MANAGEMENT_RESP:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"OPC_OUB_DEK_MANAGEMENT_RESP opcode:%x\n", opc));
+		mpi_dek_management_resp(pm8001_ha, piomb);
+		break;
+	case OPC_OUB_SSP_COALESCED_COMP_RESP:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"OPC_OUB_SSP_COALESCED_COMP_RESP opcode:%x\n", opc));
+		ssp_coalesced_comp_resp(pm8001_ha, piomb);
+		break;
+	default:
+		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+			"Unknown outbound Queue IOMB OPC = 0x%x\n", opc));
+		break;
+	}
+}
+
+static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+	struct outbound_queue_table *circularQ;
+	void *pMsg1 = NULL;
+	u8 uninitialized_var(bc);
+	u32 ret = MPI_IO_STATUS_FAIL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pm8001_ha->lock, flags);
+	circularQ = &pm8001_ha->outbnd_q_tbl[vec];
+	do {
+		ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
+		if (MPI_IO_STATUS_SUCCESS == ret) {
+			/* process the outbound message */
+			process_one_iomb(pm8001_ha, (void *)(pMsg1 - 4));
+			/* free the message from the outbound circular buffer */
+			pm8001_mpi_msg_free_set(pm8001_ha, pMsg1,
+							circularQ, bc);
+		}
+		if (MPI_IO_STATUS_BUSY == ret) {
+			/* Update the producer index from SPC */
+			circularQ->producer_index =
+				cpu_to_le32(pm8001_read_32(circularQ->pi_virt));
+			if (le32_to_cpu(circularQ->producer_index) ==
+				circularQ->consumer_idx)
+				/* OQ is empty */
+				break;
+		}
+	} while (1);
+	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+	return ret;
+}
+
+/* PCI_DMA_... to our direction translation. */
+static const u8 data_dir_flags[] = {
+	[PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT,/* UNSPECIFIED */
+	[PCI_DMA_TODEVICE]	= DATA_DIR_OUT,/* OUTBOUND */
+	[PCI_DMA_FROMDEVICE]	= DATA_DIR_IN,/* INBOUND */
+	[PCI_DMA_NONE]		= DATA_DIR_NONE,/* NO TRANSFER */
+};
+
+static void build_smp_cmd(u32 deviceID, __le32 hTag,
+			struct smp_req *psmp_cmd, int mode, int length)
+{
+	psmp_cmd->tag = hTag;
+	psmp_cmd->device_id = cpu_to_le32(deviceID);
+	if (mode == SMP_DIRECT) {
+		length = length - 4; /* subtract crc */
+		psmp_cmd->len_ip_ir = cpu_to_le32(length << 16);
+	} else {
+		psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1));
+	}
+}
+
+/**
+ * pm8001_chip_smp_req - send a SMP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_ccb_info *ccb)
+{
+	int elem, rc;
+	struct sas_task *task = ccb->task;
+	struct domain_device *dev = task->dev;
+	struct pm8001_device *pm8001_dev = dev->lldd_dev;
+	struct scatterlist *sg_req, *sg_resp;
+	u32 req_len, resp_len;
+	struct smp_req smp_cmd;
+	u32 opc;
+	struct inbound_queue_table *circularQ;
+	char *preq_dma_addr = NULL;
+	__le64 tmp_addr;
+	u32 i, length;
+
+	memset(&smp_cmd, 0, sizeof(smp_cmd));
+	/*
+	 * DMA-map SMP request, response buffers
+	 */
+	sg_req = &task->smp_task.smp_req;
+	elem = dma_map_sg(pm8001_ha->dev, sg_req, 1, PCI_DMA_TODEVICE);
+	if (!elem)
+		return -ENOMEM;
+	req_len = sg_dma_len(sg_req);
+
+	sg_resp = &task->smp_task.smp_resp;
+	elem = dma_map_sg(pm8001_ha->dev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+	if (!elem) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+	resp_len = sg_dma_len(sg_resp);
+	/* must be in dwords */
+	if ((req_len & 0x3) || (resp_len & 0x3)) {
+		rc = -EINVAL;
+		goto err_out_2;
+	}
+
+	opc = OPC_INB_SMP_REQUEST;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	smp_cmd.tag = cpu_to_le32(ccb->ccb_tag);
+
+	length = sg_req->length;
+	PM8001_IO_DBG(pm8001_ha,
+		pm8001_printk("SMP Frame Length %d\n", sg_req->length));
+	if (!(length - 8))
+		pm8001_ha->smp_exp_mode = SMP_DIRECT;
+	else
+		pm8001_ha->smp_exp_mode = SMP_INDIRECT;
+
+
+	tmp_addr = cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
+	preq_dma_addr = (char *)phys_to_virt(tmp_addr);
+
+	/* INDIRECT MODE command settings. Use DMA */
+	if (pm8001_ha->smp_exp_mode == SMP_INDIRECT) {
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("SMP REQUEST INDIRECT MODE\n"));
+		/* for SPCv indirect mode. Place the top 4 bytes of
+		 * SMP Request header here. */
+		for (i = 0; i < 4; i++)
+			smp_cmd.smp_req16[i] = *(preq_dma_addr + i);
+		/* exclude top 4 bytes for SMP req header */
+		smp_cmd.long_smp_req.long_req_addr =
+			cpu_to_le64((u64)sg_dma_address
+				(&task->smp_task.smp_req) + 4);
+		/* exclude 4 bytes for SMP req header and CRC */
+		smp_cmd.long_smp_req.long_req_size =
+			cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-8);
+		smp_cmd.long_smp_req.long_resp_addr =
+				cpu_to_le64((u64)sg_dma_address
+					(&task->smp_task.smp_resp));
+		smp_cmd.long_smp_req.long_resp_size =
+				cpu_to_le32((u32)sg_dma_len
+					(&task->smp_task.smp_resp)-4);
+	} else { /* DIRECT MODE */
+		smp_cmd.long_smp_req.long_req_addr =
+			cpu_to_le64((u64)sg_dma_address
+					(&task->smp_task.smp_req));
+		smp_cmd.long_smp_req.long_req_size =
+			cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
+		smp_cmd.long_smp_req.long_resp_addr =
+			cpu_to_le64((u64)sg_dma_address
+				(&task->smp_task.smp_resp));
+		smp_cmd.long_smp_req.long_resp_size =
+			cpu_to_le32
+			((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
+	}
+	if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("SMP REQUEST DIRECT MODE\n"));
+		for (i = 0; i < length; i++)
+			if (i < 16) {
+				smp_cmd.smp_req16[i] = *(preq_dma_addr+i);
+				PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+					"Byte[%d]:%x (DMA data:%x)\n",
+					i, smp_cmd.smp_req16[i],
+					*(preq_dma_addr)));
+			} else {
+				smp_cmd.smp_req[i] = *(preq_dma_addr+i);
+				PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+					"Byte[%d]:%x (DMA data:%x)\n",
+					i, smp_cmd.smp_req[i],
+					*(preq_dma_addr)));
+			}
+	}
+
+	build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag,
+				&smp_cmd, pm8001_ha->smp_exp_mode, length);
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
+					(u32 *)&smp_cmd, 0);
+	if (rc)
+		goto err_out_2;
+	return 0;
+
+err_out_2:
+	dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_resp, 1,
+			PCI_DMA_FROMDEVICE);
+err_out:
+	dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_req, 1,
+			PCI_DMA_TODEVICE);
+	return rc;
+}
+
+static int check_enc_sas_cmd(struct sas_task *task)
+{
+	u8 cmd = task->ssp_task.cmd->cmnd[0];
+
+	if (cmd == READ_10 || cmd == WRITE_10 || cmd == WRITE_VERIFY)
+		return 1;
+	else
+		return 0;
+}
+
+static int check_enc_sat_cmd(struct sas_task *task)
+{
+	int ret = 0;
+	switch (task->ata_task.fis.command) {
+	case ATA_CMD_FPDMA_READ:
+	case ATA_CMD_READ_EXT:
+	case ATA_CMD_READ:
+	case ATA_CMD_FPDMA_WRITE:
+	case ATA_CMD_WRITE_EXT:
+	case ATA_CMD_WRITE:
+	case ATA_CMD_PIO_READ:
+	case ATA_CMD_PIO_READ_EXT:
+	case ATA_CMD_PIO_WRITE:
+	case ATA_CMD_PIO_WRITE_EXT:
+		ret = 1;
+		break;
+	default:
+		ret = 0;
+		break;
+	}
+	return ret;
+}
+
+/**
+ * pm80xx_chip_ssp_io_req - send a SSP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_ccb_info *ccb)
+{
+	struct sas_task *task = ccb->task;
+	struct domain_device *dev = task->dev;
+	struct pm8001_device *pm8001_dev = dev->lldd_dev;
+	struct ssp_ini_io_start_req ssp_cmd;
+	u32 tag = ccb->ccb_tag;
+	int ret;
+	u64 phys_addr, start_addr, end_addr;
+	u32 end_addr_high, end_addr_low;
+	struct inbound_queue_table *circularQ;
+	u32 q_index;
+	u32 opc = OPC_INB_SSPINIIOSTART;
+	memset(&ssp_cmd, 0, sizeof(ssp_cmd));
+	memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
+	/* data address domain added for spcv; set to 0 by host,
+	 * used internally by controller
+	 * 0 for SAS 1.1 and SAS 2.0 compatible TLR
+	 */
+	ssp_cmd.dad_dir_m_tlr =
+		cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0);
+	ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+	ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+	ssp_cmd.tag = cpu_to_le32(tag);
+	if (task->ssp_task.enable_first_burst)
+		ssp_cmd.ssp_iu.efb_prio_attr |= 0x80;
+	ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
+	ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
+	memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
+		       task->ssp_task.cmd->cmd_len);
+	q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM;
+	circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
+
+	/* Check if encryption is set */
+	if (pm8001_ha->chip->encrypt &&
+		!(pm8001_ha->encrypt_info.status) && check_enc_sas_cmd(task)) {
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"Encryption enabled.Sending Encrypt SAS command 0x%x\n",
+			task->ssp_task.cmd->cmnd[0]));
+		opc = OPC_INB_SSP_INI_DIF_ENC_IO;
+		/* enable encryption. 0 for SAS 1.1 and SAS 2.0 compatible TLR*/
+		ssp_cmd.dad_dir_m_tlr =	cpu_to_le32
+			((data_dir_flags[task->data_dir] << 8) | 0x20 | 0x0);
+
+		/* fill in PRD (scatter/gather) table, if any */
+		if (task->num_scatter > 1) {
+			pm8001_chip_make_sg(task->scatter,
+						ccb->n_elem, ccb->buf_prd);
+			phys_addr = ccb->ccb_dma_handle +
+				offsetof(struct pm8001_ccb_info, buf_prd[0]);
+			ssp_cmd.enc_addr_low =
+				cpu_to_le32(lower_32_bits(phys_addr));
+			ssp_cmd.enc_addr_high =
+				cpu_to_le32(upper_32_bits(phys_addr));
+			ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
+		} else if (task->num_scatter == 1) {
+			u64 dma_addr = sg_dma_address(task->scatter);
+			ssp_cmd.enc_addr_low =
+				cpu_to_le32(lower_32_bits(dma_addr));
+			ssp_cmd.enc_addr_high =
+				cpu_to_le32(upper_32_bits(dma_addr));
+			ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+			ssp_cmd.enc_esgl = 0;
+			/* Check 4G Boundary */
+			start_addr = cpu_to_le64(dma_addr);
+			end_addr = (start_addr + ssp_cmd.enc_len) - 1;
+			end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
+			end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+			if (end_addr_high != ssp_cmd.enc_addr_high) {
+				PM8001_FAIL_DBG(pm8001_ha,
+					pm8001_printk("The sg list address "
+					"start_addr=0x%016llx data_len=0x%x "
+					"end_addr_high=0x%08x end_addr_low="
+					"0x%08x has crossed 4G boundary\n",
+						start_addr, ssp_cmd.enc_len,
+						end_addr_high, end_addr_low));
+				pm8001_chip_make_sg(task->scatter, 1,
+					ccb->buf_prd);
+				phys_addr = ccb->ccb_dma_handle +
+					offsetof(struct pm8001_ccb_info,
+						buf_prd[0]);
+				ssp_cmd.enc_addr_low =
+					cpu_to_le32(lower_32_bits(phys_addr));
+				ssp_cmd.enc_addr_high =
+					cpu_to_le32(upper_32_bits(phys_addr));
+				ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
+			}
+		} else if (task->num_scatter == 0) {
+			ssp_cmd.enc_addr_low = 0;
+			ssp_cmd.enc_addr_high = 0;
+			ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+			ssp_cmd.enc_esgl = 0;
+		}
+		/* XTS mode. All other fields are 0 */
+		ssp_cmd.key_cmode = 0x6 << 4;
+		/* set tweak values. Should be the start lba */
+		ssp_cmd.twk_val0 = cpu_to_le32((task->ssp_task.cmd->cmnd[2] << 24) |
+						(task->ssp_task.cmd->cmnd[3] << 16) |
+						(task->ssp_task.cmd->cmnd[4] << 8) |
+						(task->ssp_task.cmd->cmnd[5]));
+	} else {
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"Sending Normal SAS command 0x%x inb q %x\n",
+			task->ssp_task.cmd->cmnd[0], q_index));
+		/* fill in PRD (scatter/gather) table, if any */
+		if (task->num_scatter > 1) {
+			pm8001_chip_make_sg(task->scatter, ccb->n_elem,
+					ccb->buf_prd);
+			phys_addr = ccb->ccb_dma_handle +
+				offsetof(struct pm8001_ccb_info, buf_prd[0]);
+			ssp_cmd.addr_low =
+				cpu_to_le32(lower_32_bits(phys_addr));
+			ssp_cmd.addr_high =
+				cpu_to_le32(upper_32_bits(phys_addr));
+			ssp_cmd.esgl = cpu_to_le32(1<<31);
+		} else if (task->num_scatter == 1) {
+			u64 dma_addr = sg_dma_address(task->scatter);
+			ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr));
+			ssp_cmd.addr_high =
+				cpu_to_le32(upper_32_bits(dma_addr));
+			ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+			ssp_cmd.esgl = 0;
+			/* Check 4G Boundary */
+			start_addr = cpu_to_le64(dma_addr);
+			end_addr = (start_addr + ssp_cmd.len) - 1;
+			end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
+			end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+			if (end_addr_high != ssp_cmd.addr_high) {
+				PM8001_FAIL_DBG(pm8001_ha,
+					pm8001_printk("The sg list address "
+					"start_addr=0x%016llx data_len=0x%x "
+					"end_addr_high=0x%08x end_addr_low="
+					"0x%08x has crossed 4G boundary\n",
+						 start_addr, ssp_cmd.len,
+						 end_addr_high, end_addr_low));
+				pm8001_chip_make_sg(task->scatter, 1,
+					ccb->buf_prd);
+				phys_addr = ccb->ccb_dma_handle +
+					offsetof(struct pm8001_ccb_info,
+						 buf_prd[0]);
+				ssp_cmd.addr_low =
+					cpu_to_le32(lower_32_bits(phys_addr));
+				ssp_cmd.addr_high =
+					cpu_to_le32(upper_32_bits(phys_addr));
+				ssp_cmd.esgl = cpu_to_le32(1<<31);
+			}
+		} else if (task->num_scatter == 0) {
+			ssp_cmd.addr_low = 0;
+			ssp_cmd.addr_high = 0;
+			ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+			ssp_cmd.esgl = 0;
+		}
+	}
+	q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM;
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
+						&ssp_cmd, q_index);
+	return ret;
+}
+
+static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_ccb_info *ccb)
+{
+	struct sas_task *task = ccb->task;
+	struct domain_device *dev = task->dev;
+	struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
+	u32 tag = ccb->ccb_tag;
+	int ret;
+	u32 q_index;
+	struct sata_start_req sata_cmd;
+	u32 hdr_tag, ncg_tag = 0;
+	u64 phys_addr, start_addr, end_addr;
+	u32 end_addr_high, end_addr_low;
+	u32 ATAP = 0x0;
+	u32 dir;
+	struct inbound_queue_table *circularQ;
+	unsigned long flags;
+	u32 opc = OPC_INB_SATA_HOST_OPSTART;
+	memset(&sata_cmd, 0, sizeof(sata_cmd));
+	q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM;
+	circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
+
+	if (task->data_dir == PCI_DMA_NONE) {
+		ATAP = 0x04; /* no data*/
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n"));
+	} else if (likely(!task->ata_task.device_control_reg_update)) {
+		if (task->ata_task.dma_xfer) {
+			ATAP = 0x06; /* DMA */
+			PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n"));
+		} else {
+			ATAP = 0x05; /* PIO*/
+			PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
+		}
+		if (task->ata_task.use_ncq &&
+		    dev->sata_dev.class != ATA_DEV_ATAPI) {
+			ATAP = 0x07; /* FPDMA */
+			PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
+		}
+	}
+	if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
+		task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+		ncg_tag = hdr_tag;
+	}
+	dir = data_dir_flags[task->data_dir] << 8;
+	sata_cmd.tag = cpu_to_le32(tag);
+	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+	sata_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+
+	sata_cmd.sata_fis = task->ata_task.fis;
+	if (likely(!task->ata_task.device_control_reg_update))
+		sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */
+	sata_cmd.sata_fis.flags &= 0xF0;/* PM_PORT field shall be 0 */
+
+	/* Check if encryption is set */
+	if (pm8001_ha->chip->encrypt &&
+		!(pm8001_ha->encrypt_info.status) && check_enc_sat_cmd(task)) {
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"Encryption enabled.Sending Encrypt SATA cmd 0x%x\n",
+			sata_cmd.sata_fis.command));
+		opc = OPC_INB_SATA_DIF_ENC_IO;
+
+		/* set encryption bit */
+		sata_cmd.ncqtag_atap_dir_m_dad =
+			cpu_to_le32(((ncg_tag & 0xff)<<16)|
+				((ATAP & 0x3f) << 10) | 0x20 | dir);
+							/* dad (bit 0-1) is 0 */
+		/* fill in PRD (scatter/gather) table, if any */
+		if (task->num_scatter > 1) {
+			pm8001_chip_make_sg(task->scatter,
+						ccb->n_elem, ccb->buf_prd);
+			phys_addr = ccb->ccb_dma_handle +
+				offsetof(struct pm8001_ccb_info, buf_prd[0]);
+			sata_cmd.enc_addr_low = lower_32_bits(phys_addr);
+			sata_cmd.enc_addr_high = upper_32_bits(phys_addr);
+			sata_cmd.enc_esgl = cpu_to_le32(1 << 31);
+		} else if (task->num_scatter == 1) {
+			u64 dma_addr = sg_dma_address(task->scatter);
+			sata_cmd.enc_addr_low = lower_32_bits(dma_addr);
+			sata_cmd.enc_addr_high = upper_32_bits(dma_addr);
+			sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+			sata_cmd.enc_esgl = 0;
+			/* Check 4G Boundary */
+			start_addr = cpu_to_le64(dma_addr);
+			end_addr = (start_addr + sata_cmd.enc_len) - 1;
+			end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
+			end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+			if (end_addr_high != sata_cmd.enc_addr_high) {
+				PM8001_FAIL_DBG(pm8001_ha,
+					pm8001_printk("The sg list address "
+					"start_addr=0x%016llx data_len=0x%x "
+					"end_addr_high=0x%08x end_addr_low"
+					"=0x%08x has crossed 4G boundary\n",
+						start_addr, sata_cmd.enc_len,
+						end_addr_high, end_addr_low));
+				pm8001_chip_make_sg(task->scatter, 1,
+					ccb->buf_prd);
+				phys_addr = ccb->ccb_dma_handle +
+						offsetof(struct pm8001_ccb_info,
+						buf_prd[0]);
+				sata_cmd.enc_addr_low =
+					lower_32_bits(phys_addr);
+				sata_cmd.enc_addr_high =
+					upper_32_bits(phys_addr);
+				sata_cmd.enc_esgl =
+					cpu_to_le32(1 << 31);
+			}
+		} else if (task->num_scatter == 0) {
+			sata_cmd.enc_addr_low = 0;
+			sata_cmd.enc_addr_high = 0;
+			sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+			sata_cmd.enc_esgl = 0;
+		}
+		/* XTS mode. All other fields are 0 */
+		sata_cmd.key_index_mode = 0x6 << 4;
+		/* set tweak values. Should be the start lba */
+		sata_cmd.twk_val0 =
+			cpu_to_le32((sata_cmd.sata_fis.lbal_exp << 24) |
+					(sata_cmd.sata_fis.lbah << 16) |
+					(sata_cmd.sata_fis.lbam << 8) |
+					(sata_cmd.sata_fis.lbal));
+		sata_cmd.twk_val1 =
+			cpu_to_le32((sata_cmd.sata_fis.lbah_exp << 8) |
+					 (sata_cmd.sata_fis.lbam_exp));
+	} else {
+		PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+			"Sending Normal SATA command 0x%x inb %x\n",
+			sata_cmd.sata_fis.command, q_index));
+		/* dad (bit 0-1) is 0 */
+		sata_cmd.ncqtag_atap_dir_m_dad =
+			cpu_to_le32(((ncg_tag & 0xff)<<16) |
+					((ATAP & 0x3f) << 10) | dir);
+
+		/* fill in PRD (scatter/gather) table, if any */
+		if (task->num_scatter > 1) {
+			pm8001_chip_make_sg(task->scatter,
+					ccb->n_elem, ccb->buf_prd);
+			phys_addr = ccb->ccb_dma_handle +
+				offsetof(struct pm8001_ccb_info, buf_prd[0]);
+			sata_cmd.addr_low = lower_32_bits(phys_addr);
+			sata_cmd.addr_high = upper_32_bits(phys_addr);
+			sata_cmd.esgl = cpu_to_le32(1 << 31);
+		} else if (task->num_scatter == 1) {
+			u64 dma_addr = sg_dma_address(task->scatter);
+			sata_cmd.addr_low = lower_32_bits(dma_addr);
+			sata_cmd.addr_high = upper_32_bits(dma_addr);
+			sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+			sata_cmd.esgl = 0;
+			/* Check 4G Boundary */
+			start_addr = cpu_to_le64(dma_addr);
+			end_addr = (start_addr + sata_cmd.len) - 1;
+			end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
+			end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+			if (end_addr_high != sata_cmd.addr_high) {
+				PM8001_FAIL_DBG(pm8001_ha,
+					pm8001_printk("The sg list address "
+					"start_addr=0x%016llx data_len=0x%x"
+					"end_addr_high=0x%08x end_addr_low="
+					"0x%08x has crossed 4G boundary\n",
+						start_addr, sata_cmd.len,
+						end_addr_high, end_addr_low));
+				pm8001_chip_make_sg(task->scatter, 1,
+					ccb->buf_prd);
+				phys_addr = ccb->ccb_dma_handle +
+					offsetof(struct pm8001_ccb_info,
+					buf_prd[0]);
+				sata_cmd.addr_low =
+					lower_32_bits(phys_addr);
+				sata_cmd.addr_high =
+					upper_32_bits(phys_addr);
+				sata_cmd.esgl = cpu_to_le32(1 << 31);
+			}
+		} else if (task->num_scatter == 0) {
+			sata_cmd.addr_low = 0;
+			sata_cmd.addr_high = 0;
+			sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+			sata_cmd.esgl = 0;
+		}
+			/* scsi cdb */
+			sata_cmd.atapi_scsi_cdb[0] =
+				cpu_to_le32(((task->ata_task.atapi_packet[0]) |
+				(task->ata_task.atapi_packet[1] << 8) |
+				(task->ata_task.atapi_packet[2] << 16) |
+				(task->ata_task.atapi_packet[3] << 24)));
+			sata_cmd.atapi_scsi_cdb[1] =
+				cpu_to_le32(((task->ata_task.atapi_packet[4]) |
+				(task->ata_task.atapi_packet[5] << 8) |
+				(task->ata_task.atapi_packet[6] << 16) |
+				(task->ata_task.atapi_packet[7] << 24)));
+			sata_cmd.atapi_scsi_cdb[2] =
+				cpu_to_le32(((task->ata_task.atapi_packet[8]) |
+				(task->ata_task.atapi_packet[9] << 8) |
+				(task->ata_task.atapi_packet[10] << 16) |
+				(task->ata_task.atapi_packet[11] << 24)));
+			sata_cmd.atapi_scsi_cdb[3] =
+				cpu_to_le32(((task->ata_task.atapi_packet[12]) |
+				(task->ata_task.atapi_packet[13] << 8) |
+				(task->ata_task.atapi_packet[14] << 16) |
+				(task->ata_task.atapi_packet[15] << 24)));
+	}
+
+	/* Check for read log for failed drive and return */
+	if (sata_cmd.sata_fis.command == 0x2f) {
+		if (pm8001_ha_dev && ((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) ||
+			(pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) ||
+			(pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) {
+			struct task_status_struct *ts;
+
+			pm8001_ha_dev->id &= 0xDFFFFFFF;
+			ts = &task->task_status;
+
+			spin_lock_irqsave(&task->task_state_lock, flags);
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAM_STAT_GOOD;
+			task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+			task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+			task->task_state_flags |= SAS_TASK_STATE_DONE;
+			if (unlikely((task->task_state_flags &
+					SAS_TASK_STATE_ABORTED))) {
+				spin_unlock_irqrestore(&task->task_state_lock,
+							flags);
+				PM8001_FAIL_DBG(pm8001_ha,
+					pm8001_printk("task 0x%p resp 0x%x "
+					" stat 0x%x but aborted by upper layer "
+					"\n", task, ts->resp, ts->stat));
+				pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+				return 0;
+			} else {
+				spin_unlock_irqrestore(&task->task_state_lock,
+							flags);
+				pm8001_ccb_task_free_done(pm8001_ha, task,
+								ccb, tag);
+				return 0;
+			}
+		}
+	}
+	q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM;
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
+						&sata_cmd, q_index);
+	return ret;
+}
+
+/**
+ * pm80xx_chip_phy_start_req - start phy via PHY_START COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int
+pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
+{
+	struct phy_start_req payload;
+	struct inbound_queue_table *circularQ;
+	int ret;
+	u32 tag = 0x01;
+	u32 opcode = OPC_INB_PHYSTART;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	memset(&payload, 0, sizeof(payload));
+	payload.tag = cpu_to_le32(tag);
+
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("PHY START REQ for phy_id %d\n", phy_id));
+	/*
+	 ** [0:7]	PHY Identifier
+	 ** [8:11]	link rate 1.5G, 3G, 6G
+	 ** [12:13] link mode 01b SAS mode; 10b SATA mode; 11b Auto mode
+	 ** [14]	0b disable spin up hold; 1b enable spin up hold
+	 ** [15] ob no change in current PHY analig setup 1b enable using SPAST
+	 */
+	if (!IS_SPCV_12G(pm8001_ha->pdev))
+		payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+				LINKMODE_AUTO | LINKRATE_15 |
+				LINKRATE_30 | LINKRATE_60 | phy_id);
+	else
+		payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+				LINKMODE_AUTO | LINKRATE_15 |
+				LINKRATE_30 | LINKRATE_60 | LINKRATE_120 |
+				phy_id);
+
+	/* SSC Disable and SAS Analog ST configuration */
+	/**
+	payload.ase_sh_lm_slr_phyid =
+		cpu_to_le32(SSC_DISABLE_30 | SAS_ASE | SPINHOLD_DISABLE |
+		LINKMODE_AUTO | LINKRATE_15 | LINKRATE_30 | LINKRATE_60 |
+		phy_id);
+	Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need
+	**/
+
+	payload.sas_identify.dev_type = SAS_END_DEVICE;
+	payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
+	memcpy(payload.sas_identify.sas_addr,
+		pm8001_ha->sas_addr, SAS_ADDR_SIZE);
+	payload.sas_identify.phy_id = phy_id;
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0);
+	return ret;
+}
+
+/**
+ * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int pm80xx_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
+	u8 phy_id)
+{
+	struct phy_stop_req payload;
+	struct inbound_queue_table *circularQ;
+	int ret;
+	u32 tag = 0x01;
+	u32 opcode = OPC_INB_PHYSTOP;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	memset(&payload, 0, sizeof(payload));
+	payload.tag = cpu_to_le32(tag);
+	payload.phy_id = cpu_to_le32(phy_id);
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0);
+	return ret;
+}
+
+/**
+ * see comments on pm8001_mpi_reg_resp.
+ */
+static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
+	struct pm8001_device *pm8001_dev, u32 flag)
+{
+	struct reg_dev_req payload;
+	u32	opc;
+	u32 stp_sspsmp_sata = 0x4;
+	struct inbound_queue_table *circularQ;
+	u32 linkrate, phy_id;
+	int rc, tag = 0xdeadbeef;
+	struct pm8001_ccb_info *ccb;
+	u8 retryFlag = 0x1;
+	u16 firstBurstSize = 0;
+	u16 ITNT = 2000;
+	struct domain_device *dev = pm8001_dev->sas_device;
+	struct domain_device *parent_dev = dev->parent;
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+	memset(&payload, 0, sizeof(payload));
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+	if (rc)
+		return rc;
+	ccb = &pm8001_ha->ccb_info[tag];
+	ccb->device = pm8001_dev;
+	ccb->ccb_tag = tag;
+	payload.tag = cpu_to_le32(tag);
+
+	if (flag == 1) {
+		stp_sspsmp_sata = 0x02; /*direct attached sata */
+	} else {
+		if (pm8001_dev->dev_type == SAS_SATA_DEV)
+			stp_sspsmp_sata = 0x00; /* stp*/
+		else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+			pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+			pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+			stp_sspsmp_sata = 0x01; /*ssp or smp*/
+	}
+	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
+		phy_id = parent_dev->ex_dev.ex_phy->phy_id;
+	else
+		phy_id = pm8001_dev->attached_phy;
+
+	opc = OPC_INB_REG_DEV;
+
+	linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ?
+			pm8001_dev->sas_device->linkrate : dev->port->linkrate;
+
+	payload.phyid_portid =
+		cpu_to_le32(((pm8001_dev->sas_device->port->id) & 0xFF) |
+		((phy_id & 0xFF) << 8));
+
+	payload.dtype_dlr_mcn_ir_retry = cpu_to_le32((retryFlag & 0x01) |
+		((linkrate & 0x0F) << 24) |
+		((stp_sspsmp_sata & 0x03) << 28));
+	payload.firstburstsize_ITNexustimeout =
+		cpu_to_le32(ITNT | (firstBurstSize * 0x10000));
+
+	memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr,
+		SAS_ADDR_SIZE);
+
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	if (rc)
+		pm8001_tag_free(pm8001_ha, tag);
+
+	return rc;
+}
+
+/**
+ * pm80xx_chip_phy_ctl_req - support the local phy operation
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to operate
+ * @phy_op:
+ */
+static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+	u32 phyId, u32 phy_op)
+{
+	struct local_phy_ctl_req payload;
+	struct inbound_queue_table *circularQ;
+	int ret;
+	u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
+	memset(&payload, 0, sizeof(payload));
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	payload.tag = cpu_to_le32(1);
+	payload.phyop_phyid =
+		cpu_to_le32(((phy_op & 0xFF) << 8) | (phyId & 0xFF));
+	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	return ret;
+}
+
+static u32 pm80xx_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
+{
+	u32 value;
+#ifdef PM8001_USE_MSIX
+	return 1;
+#endif
+	value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
+	if (value)
+		return 1;
+	return 0;
+
+}
+
+/**
+ * pm8001_chip_isr - PM8001 isr handler.
+ * @pm8001_ha: our hba card information.
+ * @irq: irq number.
+ * @stat: stat.
+ */
+static irqreturn_t
+pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+	pm80xx_chip_interrupt_disable(pm8001_ha, vec);
+	process_oq(pm8001_ha, vec);
+	pm80xx_chip_interrupt_enable(pm8001_ha, vec);
+	return IRQ_HANDLED;
+}
+
+void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha,
+	u32 operation, u32 phyid, u32 length, u32 *buf)
+{
+	u32 tag , i, j = 0;
+	int rc;
+	struct set_phy_profile_req payload;
+	struct inbound_queue_table *circularQ;
+	u32 opc = OPC_INB_SET_PHY_PROFILE;
+
+	memset(&payload, 0, sizeof(payload));
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+	if (rc)
+		PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Invalid tag\n"));
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	payload.tag = cpu_to_le32(tag);
+	payload.ppc_phyid = (((operation & 0xF) << 8) | (phyid  & 0xFF));
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk(" phy profile command for phy %x ,length is %d\n",
+			payload.ppc_phyid, length));
+	for (i = length; i < (length + PHY_DWORD_LENGTH - 1); i++) {
+		payload.reserved[j] =  cpu_to_le32(*((u32 *)buf + i));
+		j++;
+	}
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	if (rc)
+		pm8001_tag_free(pm8001_ha, tag);
+}
+
+void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
+	u32 length, u8 *buf)
+{
+	u32 page_code, i;
+
+	page_code = SAS_PHY_ANALOG_SETTINGS_PAGE;
+	for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+		mpi_set_phy_profile_req(pm8001_ha,
+			SAS_PHY_ANALOG_SETTINGS_PAGE, i, length, (u32 *)buf);
+		length = length + PHY_DWORD_LENGTH;
+	}
+	PM8001_INIT_DBG(pm8001_ha, pm8001_printk("phy settings completed\n"));
+}
+const struct pm8001_dispatch pm8001_80xx_dispatch = {
+	.name			= "pmc80xx",
+	.chip_init		= pm80xx_chip_init,
+	.chip_soft_rst		= pm80xx_chip_soft_rst,
+	.chip_rst		= pm80xx_hw_chip_rst,
+	.chip_iounmap		= pm8001_chip_iounmap,
+	.isr			= pm80xx_chip_isr,
+	.is_our_interupt	= pm80xx_chip_is_our_interupt,
+	.isr_process_oq		= process_oq,
+	.interrupt_enable	= pm80xx_chip_interrupt_enable,
+	.interrupt_disable	= pm80xx_chip_interrupt_disable,
+	.make_prd		= pm8001_chip_make_sg,
+	.smp_req		= pm80xx_chip_smp_req,
+	.ssp_io_req		= pm80xx_chip_ssp_io_req,
+	.sata_req		= pm80xx_chip_sata_req,
+	.phy_start_req		= pm80xx_chip_phy_start_req,
+	.phy_stop_req		= pm80xx_chip_phy_stop_req,
+	.reg_dev_req		= pm80xx_chip_reg_dev_req,
+	.dereg_dev_req		= pm8001_chip_dereg_dev_req,
+	.phy_ctl_req		= pm80xx_chip_phy_ctl_req,
+	.task_abort		= pm8001_chip_abort_task,
+	.ssp_tm_req		= pm8001_chip_ssp_tm_req,
+	.get_nvmd_req		= pm8001_chip_get_nvmd_req,
+	.set_nvmd_req		= pm8001_chip_set_nvmd_req,
+	.fw_flash_update_req	= pm8001_chip_fw_flash_update_req,
+	.set_dev_state_req	= pm8001_chip_set_dev_state_req,
+};
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
new file mode 100644
index 000000000..9970a3857
--- /dev/null
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -0,0 +1,1532 @@
+/*
+ * PMC-Sierra SPCv/ve 8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *	notice, this list of conditions, and the following disclaimer,
+ *	without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *	substantially similar to the "NO WARRANTY" disclaimer below
+ *	("Disclaimer") and any redistribution must be conditioned upon
+ *	including a substantially similar Disclaimer requirement for further
+ *	binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *	of any contributors may be used to endorse or promote products derived
+ *	from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PMC8001_REG_H_
+#define _PMC8001_REG_H_
+
+#include <linux/types.h>
+#include <scsi/libsas.h>
+
+/* for Request Opcode of IOMB */
+#define OPC_INB_ECHO				1	/* 0x000 */
+#define OPC_INB_PHYSTART			4	/* 0x004 */
+#define OPC_INB_PHYSTOP				5	/* 0x005 */
+#define OPC_INB_SSPINIIOSTART			6	/* 0x006 */
+#define OPC_INB_SSPINITMSTART			7	/* 0x007 */
+/* 0x8 RESV IN SPCv */
+#define OPC_INB_RSVD				8	/* 0x008 */
+#define OPC_INB_DEV_HANDLE_ACCEPT		9	/* 0x009 */
+#define OPC_INB_SSPTGTIOSTART			10	/* 0x00A */
+#define OPC_INB_SSPTGTRSPSTART			11	/* 0x00B */
+/* 0xC, 0xD, 0xE removed in SPCv */
+#define OPC_INB_SSP_ABORT			15	/* 0x00F */
+#define OPC_INB_DEREG_DEV_HANDLE		16	/* 0x010 */
+#define OPC_INB_GET_DEV_HANDLE			17	/* 0x011 */
+#define OPC_INB_SMP_REQUEST			18	/* 0x012 */
+/* 0x13 SMP_RESPONSE is removed in SPCv */
+#define OPC_INB_SMP_ABORT			20	/* 0x014 */
+/* 0x16 RESV IN SPCv */
+#define OPC_INB_RSVD1				22	/* 0x016 */
+#define OPC_INB_SATA_HOST_OPSTART		23	/* 0x017 */
+#define OPC_INB_SATA_ABORT			24	/* 0x018 */
+#define OPC_INB_LOCAL_PHY_CONTROL		25	/* 0x019 */
+/* 0x1A RESV IN SPCv */
+#define OPC_INB_RSVD2				26	/* 0x01A */
+#define OPC_INB_FW_FLASH_UPDATE			32	/* 0x020 */
+#define OPC_INB_GPIO				34	/* 0x022 */
+#define OPC_INB_SAS_DIAG_MODE_START_END		35	/* 0x023 */
+#define OPC_INB_SAS_DIAG_EXECUTE		36	/* 0x024 */
+/* 0x25 RESV IN SPCv */
+#define OPC_INB_RSVD3				37	/* 0x025 */
+#define OPC_INB_GET_TIME_STAMP			38	/* 0x026 */
+#define OPC_INB_PORT_CONTROL			39	/* 0x027 */
+#define OPC_INB_GET_NVMD_DATA			40	/* 0x028 */
+#define OPC_INB_SET_NVMD_DATA			41	/* 0x029 */
+#define OPC_INB_SET_DEVICE_STATE		42	/* 0x02A */
+#define OPC_INB_GET_DEVICE_STATE		43	/* 0x02B */
+#define OPC_INB_SET_DEV_INFO			44	/* 0x02C */
+/* 0x2D RESV IN SPCv */
+#define OPC_INB_RSVD4				45	/* 0x02D */
+#define OPC_INB_SGPIO_REGISTER			46	/* 0x02E */
+#define OPC_INB_PCIE_DIAG_EXEC			47	/* 0x02F */
+#define OPC_INB_SET_CONTROLLER_CONFIG		48	/* 0x030 */
+#define OPC_INB_GET_CONTROLLER_CONFIG		49	/* 0x031 */
+#define OPC_INB_REG_DEV				50	/* 0x032 */
+#define OPC_INB_SAS_HW_EVENT_ACK		51	/* 0x033 */
+#define OPC_INB_GET_DEVICE_INFO			52	/* 0x034 */
+#define OPC_INB_GET_PHY_PROFILE			53	/* 0x035 */
+#define OPC_INB_FLASH_OP_EXT			54	/* 0x036 */
+#define OPC_INB_SET_PHY_PROFILE			55	/* 0x037 */
+#define OPC_INB_KEK_MANAGEMENT			256	/* 0x100 */
+#define OPC_INB_DEK_MANAGEMENT			257	/* 0x101 */
+#define OPC_INB_SSP_INI_DIF_ENC_IO		258	/* 0x102 */
+#define OPC_INB_SATA_DIF_ENC_IO			259	/* 0x103 */
+
+/* for Response Opcode of IOMB */
+#define OPC_OUB_ECHO					1	/* 0x001 */
+#define OPC_OUB_RSVD					4	/* 0x004 */
+#define OPC_OUB_SSP_COMP				5	/* 0x005 */
+#define OPC_OUB_SMP_COMP				6	/* 0x006 */
+#define OPC_OUB_LOCAL_PHY_CNTRL				7	/* 0x007 */
+#define OPC_OUB_RSVD1					10	/* 0x00A */
+#define OPC_OUB_DEREG_DEV				11	/* 0x00B */
+#define OPC_OUB_GET_DEV_HANDLE				12	/* 0x00C */
+#define OPC_OUB_SATA_COMP				13	/* 0x00D */
+#define OPC_OUB_SATA_EVENT				14	/* 0x00E */
+#define OPC_OUB_SSP_EVENT				15	/* 0x00F */
+#define OPC_OUB_RSVD2					16	/* 0x010 */
+/* 0x11 - SMP_RECEIVED Notification removed in SPCv*/
+#define OPC_OUB_SSP_RECV_EVENT				18	/* 0x012 */
+#define OPC_OUB_RSVD3					19	/* 0x013 */
+#define OPC_OUB_FW_FLASH_UPDATE				20	/* 0x014 */
+#define OPC_OUB_GPIO_RESPONSE				22	/* 0x016 */
+#define OPC_OUB_GPIO_EVENT				23	/* 0x017 */
+#define OPC_OUB_GENERAL_EVENT				24	/* 0x018 */
+#define OPC_OUB_SSP_ABORT_RSP				26	/* 0x01A */
+#define OPC_OUB_SATA_ABORT_RSP				27	/* 0x01B */
+#define OPC_OUB_SAS_DIAG_MODE_START_END			28	/* 0x01C */
+#define OPC_OUB_SAS_DIAG_EXECUTE			29	/* 0x01D */
+#define OPC_OUB_GET_TIME_STAMP				30	/* 0x01E */
+#define OPC_OUB_RSVD4					31	/* 0x01F */
+#define OPC_OUB_PORT_CONTROL				32	/* 0x020 */
+#define OPC_OUB_SKIP_ENTRY				33	/* 0x021 */
+#define OPC_OUB_SMP_ABORT_RSP				34	/* 0x022 */
+#define OPC_OUB_GET_NVMD_DATA				35	/* 0x023 */
+#define OPC_OUB_SET_NVMD_DATA				36	/* 0x024 */
+#define OPC_OUB_DEVICE_HANDLE_REMOVAL			37	/* 0x025 */
+#define OPC_OUB_SET_DEVICE_STATE			38	/* 0x026 */
+#define OPC_OUB_GET_DEVICE_STATE			39	/* 0x027 */
+#define OPC_OUB_SET_DEV_INFO				40	/* 0x028 */
+#define OPC_OUB_RSVD5					41	/* 0x029 */
+#define OPC_OUB_HW_EVENT				1792	/* 0x700 */
+#define OPC_OUB_DEV_HANDLE_ARRIV			1824	/* 0x720 */
+#define OPC_OUB_THERM_HW_EVENT				1840	/* 0x730 */
+#define OPC_OUB_SGPIO_RESP				2094	/* 0x82E */
+#define OPC_OUB_PCIE_DIAG_EXECUTE			2095	/* 0x82F */
+#define OPC_OUB_DEV_REGIST				2098	/* 0x832 */
+#define OPC_OUB_SAS_HW_EVENT_ACK			2099	/* 0x833 */
+#define OPC_OUB_GET_DEVICE_INFO				2100	/* 0x834 */
+/* spcv specific commands */
+#define OPC_OUB_PHY_START_RESP				2052	/* 0x804 */
+#define OPC_OUB_PHY_STOP_RESP				2053	/* 0x805 */
+#define OPC_OUB_SET_CONTROLLER_CONFIG			2096	/* 0x830 */
+#define OPC_OUB_GET_CONTROLLER_CONFIG			2097	/* 0x831 */
+#define OPC_OUB_GET_PHY_PROFILE				2101	/* 0x835 */
+#define OPC_OUB_FLASH_OP_EXT				2102	/* 0x836 */
+#define OPC_OUB_SET_PHY_PROFILE				2103	/* 0x837 */
+#define OPC_OUB_KEK_MANAGEMENT_RESP			2304	/* 0x900 */
+#define OPC_OUB_DEK_MANAGEMENT_RESP			2305	/* 0x901 */
+#define OPC_OUB_SSP_COALESCED_COMP_RESP			2306	/* 0x902 */
+
+/* for phy start*/
+#define SSC_DISABLE_15			(0x01 << 16)
+#define SSC_DISABLE_30			(0x02 << 16)
+#define SSC_DISABLE_60			(0x04 << 16)
+#define SAS_ASE				(0x01 << 15)
+#define SPINHOLD_DISABLE		(0x00 << 14)
+#define SPINHOLD_ENABLE			(0x01 << 14)
+#define LINKMODE_SAS			(0x01 << 12)
+#define LINKMODE_DSATA			(0x02 << 12)
+#define LINKMODE_AUTO			(0x03 << 12)
+#define LINKRATE_15			(0x01 << 8)
+#define LINKRATE_30			(0x02 << 8)
+#define LINKRATE_60			(0x06 << 8)
+#define LINKRATE_120			(0x08 << 8)
+
+/* phy_profile */
+#define SAS_PHY_ANALOG_SETTINGS_PAGE	0x04
+#define PHY_DWORD_LENGTH		0xC
+
+/* Thermal related */
+#define	THERMAL_ENABLE			0x1
+#define	THERMAL_LOG_ENABLE		0x1
+#define THERMAL_OP_CODE			0x6
+#define LTEMPHIL			 70
+#define RTEMPHIL			100
+
+/* Encryption info */
+#define SCRATCH_PAD3_ENC_DISABLED	0x00000000
+#define SCRATCH_PAD3_ENC_DIS_ERR	0x00000001
+#define SCRATCH_PAD3_ENC_ENA_ERR	0x00000002
+#define SCRATCH_PAD3_ENC_READY		0x00000003
+#define SCRATCH_PAD3_ENC_MASK		SCRATCH_PAD3_ENC_READY
+
+#define SCRATCH_PAD3_XTS_ENABLED		(1 << 14)
+#define SCRATCH_PAD3_SMA_ENABLED		(1 << 4)
+#define SCRATCH_PAD3_SMB_ENABLED		(1 << 5)
+#define SCRATCH_PAD3_SMF_ENABLED		0
+#define SCRATCH_PAD3_SM_MASK			0x000000F0
+#define SCRATCH_PAD3_ERR_CODE			0x00FF0000
+
+#define SEC_MODE_SMF				0x0
+#define SEC_MODE_SMA				0x100
+#define SEC_MODE_SMB				0x200
+#define CIPHER_MODE_ECB				0x00000001
+#define CIPHER_MODE_XTS				0x00000002
+#define KEK_MGMT_SUBOP_KEYCARDUPDATE		0x4
+
+/* SAS protocol timer configuration page */
+#define SAS_PROTOCOL_TIMER_CONFIG_PAGE  0x04
+#define STP_MCT_TMO                     32
+#define SSP_MCT_TMO                     32
+#define SAS_MAX_OPEN_TIME				5
+#define SMP_MAX_CONN_TIMER              0xFF
+#define STP_FRM_TIMER                   0
+#define STP_IDLE_TIME                   5 /* 5 us; controller default */
+#define SAS_MFD                         0
+#define SAS_OPNRJT_RTRY_INTVL           2
+#define SAS_DOPNRJT_RTRY_TMO            128
+#define SAS_COPNRJT_RTRY_TMO            128
+
+/* for phy state */
+#define PHY_STATE_LINK_UP_SPCV		0x2
+/*
+  Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second.
+  Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128
+  is DOPNRJT_RTRY_TMO
+*/
+#define SAS_DOPNRJT_RTRY_THR            23438
+#define SAS_COPNRJT_RTRY_THR            23438
+#define SAS_MAX_AIP                     0x200000
+#define IT_NEXUS_TIMEOUT       0x7D0
+#define PORT_RECOVERY_TIMEOUT  ((IT_NEXUS_TIMEOUT/100) + 30)
+
+struct mpi_msg_hdr {
+	__le32	header;	/* Bits [11:0] - Message operation code */
+	/* Bits [15:12] - Message Category */
+	/* Bits [21:16] - Outboundqueue ID for the
+	operation completion message */
+	/* Bits [23:22] - Reserved */
+	/* Bits [28:24] - Buffer Count, indicates how
+	many buffer are allocated for the massage */
+	/* Bits [30:29] - Reserved */
+	/* Bits [31] - Message Valid bit */
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to describe enable the phy (128 bytes)
+ */
+struct phy_start_req {
+	__le32	tag;
+	__le32	ase_sh_lm_slr_phyid;
+	struct sas_identify_frame sas_identify; /* 28 Bytes */
+	__le32 spasti;
+	u32	reserved[21];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to disable the phy (128 bytes)
+ */
+struct phy_stop_req {
+	__le32	tag;
+	__le32	phy_id;
+	u32	reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/* set device bits fis - device to host */
+struct set_dev_bits_fis {
+	u8	fis_type;	/* 0xA1*/
+	u8	n_i_pmport;
+	/* b7 : n Bit. Notification bit. If set device needs attention. */
+	/* b6 : i Bit. Interrupt Bit */
+	/* b5-b4: reserved2 */
+	/* b3-b0: PM Port */
+	u8	status;
+	u8	error;
+	u32	_r_a;
+} __attribute__ ((packed));
+/* PIO setup FIS - device to host */
+struct pio_setup_fis {
+	u8	fis_type;	/* 0x5f */
+	u8	i_d_pmPort;
+	/* b7 : reserved */
+	/* b6 : i bit. Interrupt bit */
+	/* b5 : d bit. data transfer direction. set to 1 for device to host
+	xfer */
+	/* b4 : reserved */
+	/* b3-b0: PM Port */
+	u8	status;
+	u8	error;
+	u8	lbal;
+	u8	lbam;
+	u8	lbah;
+	u8	device;
+	u8	lbal_exp;
+	u8	lbam_exp;
+	u8	lbah_exp;
+	u8	_r_a;
+	u8	sector_count;
+	u8	sector_count_exp;
+	u8	_r_b;
+	u8	e_status;
+	u8	_r_c[2];
+	u8	transfer_count;
+} __attribute__ ((packed));
+
+/*
+ * brief the data structure of SATA Completion Response
+ * use to describe the sata task response (64 bytes)
+ */
+struct sata_completion_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	param;
+	u32	sata_resp[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SAS HW Event Notification
+ * use to alert the host about the hardware event(64 bytes)
+ */
+/* updated outbound struct for spcv */
+
+struct hw_event_resp {
+	__le32	lr_status_evt_portid;
+	__le32	evt_param;
+	__le32	phyid_npip_portstate;
+	struct sas_identify_frame	sas_identify;
+	struct dev_to_host_fis	sata_fis;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure for thermal event notification
+ */
+
+struct thermal_hw_event {
+	__le32	thermal_event;
+	__le32	rht_lht;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of REGISTER DEVICE Command
+ * use to describe MPI REGISTER DEVICE Command (64 bytes)
+ */
+
+struct reg_dev_req {
+	__le32	tag;
+	__le32	phyid_portid;
+	__le32	dtype_dlr_mcn_ir_retry;
+	__le32	firstburstsize_ITNexustimeout;
+	u8	sas_addr[SAS_ADDR_SIZE];
+	__le32	upper_device_id;
+	u32	reserved[24];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of DEREGISTER DEVICE Command
+ * use to request spc to remove all internal resources associated
+ * with the device id (64 bytes)
+ */
+
+struct dereg_dev_req {
+	__le32	tag;
+	__le32	device_id;
+	u32	reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of DEVICE_REGISTRATION Response
+ * use to notify the completion of the device registration (64 bytes)
+ */
+struct dev_reg_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	device_id;
+	u32	reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of Local PHY Control Command
+ * use to issue PHY CONTROL to local phy (64 bytes)
+ */
+struct local_phy_ctl_req {
+	__le32	tag;
+	__le32	phyop_phyid;
+	u32	reserved1[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Local Phy Control Response
+ * use to describe MPI Local Phy Control Response (64 bytes)
+ */
+ struct local_phy_ctl_resp {
+	__le32	tag;
+	__le32	phyop_phyid;
+	__le32	status;
+	u32	reserved[12];
+} __attribute__((packed, aligned(4)));
+
+#define OP_BITS 0x0000FF00
+#define ID_BITS 0x000000FF
+
+/*
+ * brief the data structure of PORT Control Command
+ * use to control port properties (64 bytes)
+ */
+
+struct port_ctl_req {
+	__le32	tag;
+	__le32	portop_portid;
+	__le32	param0;
+	__le32	param1;
+	u32	reserved1[27];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of HW Event Ack Command
+ * use to acknowledge receive HW event (64 bytes)
+ */
+struct hw_event_ack_req {
+	__le32	tag;
+	__le32	phyid_sea_portid;
+	__le32	param0;
+	__le32	param1;
+	u32	reserved1[27];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY_START Response Command
+ * indicates the completion of PHY_START command (64 bytes)
+ */
+struct phy_start_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	phyid;
+	u32	reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY_STOP Response Command
+ * indicates the completion of PHY_STOP command (64 bytes)
+ */
+struct phy_stop_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	phyid;
+	u32	reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SSP Completion Response
+ * use to indicate a SSP Completion (n bytes)
+ */
+struct ssp_completion_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	param;
+	__le32	ssptag_rescv_rescpad;
+	struct ssp_response_iu ssp_resp_iu;
+	__le32	residual_count;
+} __attribute__((packed, aligned(4)));
+
+#define SSP_RESCV_BIT	0x00010000
+
+/*
+ * brief the data structure of SATA EVNET response
+ * use to indicate a SATA Completion (64 bytes)
+ */
+struct sata_event_resp {
+	__le32 tag;
+	__le32 event;
+	__le32 port_id;
+	__le32 device_id;
+	u32 reserved;
+	__le32 event_param0;
+	__le32 event_param1;
+	__le32 sata_addr_h32;
+	__le32 sata_addr_l32;
+	__le32 e_udt1_udt0_crc;
+	__le32 e_udt5_udt4_udt3_udt2;
+	__le32 a_udt1_udt0_crc;
+	__le32 a_udt5_udt4_udt3_udt2;
+	__le32 hwdevid_diferr;
+	__le32 err_framelen_byteoffset;
+	__le32 err_dataframe;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SSP EVNET esponse
+ * use to indicate a SSP Completion (64 bytes)
+ */
+struct ssp_event_resp {
+	__le32 tag;
+	__le32 event;
+	__le32 port_id;
+	__le32 device_id;
+	__le32 ssp_tag;
+	__le32 event_param0;
+	__le32 event_param1;
+	__le32 sas_addr_h32;
+	__le32 sas_addr_l32;
+	__le32 e_udt1_udt0_crc;
+	__le32 e_udt5_udt4_udt3_udt2;
+	__le32 a_udt1_udt0_crc;
+	__le32 a_udt5_udt4_udt3_udt2;
+	__le32 hwdevid_diferr;
+	__le32 err_framelen_byteoffset;
+	__le32 err_dataframe;
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of General Event Notification Response
+ * use to describe MPI General Event Notification Response (64 bytes)
+ */
+struct general_event_resp {
+	__le32	status;
+	__le32	inb_IOMB_payload[14];
+} __attribute__((packed, aligned(4)));
+
+#define GENERAL_EVENT_PAYLOAD	14
+#define OPCODE_BITS	0x00000fff
+
+/*
+ * brief the data structure of SMP Request Command
+ * use to describe MPI SMP REQUEST Command (64 bytes)
+ */
+struct smp_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	len_ip_ir;
+	/* Bits [0] - Indirect response */
+	/* Bits [1] - Indirect Payload */
+	/* Bits [15:2] - Reserved */
+	/* Bits [23:16] - direct payload Len */
+	/* Bits [31:24] - Reserved */
+	u8	smp_req16[16];
+	union {
+		u8	smp_req[32];
+		struct {
+			__le64 long_req_addr;/* sg dma address, LE */
+			__le32 long_req_size;/* LE */
+			u32	_r_a;
+			__le64 long_resp_addr;/* sg dma address, LE */
+			__le32 long_resp_size;/* LE */
+			u32	_r_b;
+			} long_smp_req;/* sequencer extension */
+	};
+	__le32	rsvd[16];
+} __attribute__((packed, aligned(4)));
+/*
+ * brief the data structure of SMP Completion Response
+ * use to describe MPI SMP Completion Response (64 bytes)
+ */
+struct smp_completion_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	param;
+	u8	_r_a[252];
+} __attribute__((packed, aligned(4)));
+
+/*
+ *brief the data structure of SSP SMP SATA Abort Command
+ * use to describe MPI SSP SMP & SATA Abort Command (64 bytes)
+ */
+struct task_abort_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	tag_to_abort;
+	__le32	abort_all;
+	u32	reserved[27];
+} __attribute__((packed, aligned(4)));
+
+/* These flags used for SSP SMP & SATA Abort */
+#define ABORT_MASK		0x3
+#define ABORT_SINGLE		0x0
+#define ABORT_ALL		0x1
+
+/**
+ * brief the data structure of SSP SATA SMP Abort Response
+ * use to describe SSP SMP & SATA Abort Response ( 64 bytes)
+ */
+struct task_abort_resp {
+	__le32	tag;
+	__le32	status;
+	__le32	scp;
+	u32	reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Command
+ * use to describe MPI SAS Diagnostic Start/End Command (64 bytes)
+ */
+struct sas_diag_start_end_req {
+	__le32	tag;
+	__le32	operation_phyid;
+	u32	reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Command
+ * use to describe MPI SAS Diagnostic Execute Command (64 bytes)
+ */
+struct sas_diag_execute_req {
+	__le32	tag;
+	__le32	cmdtype_cmddesc_phyid;
+	__le32	pat1_pat2;
+	__le32	threshold;
+	__le32	codepat_errmsk;
+	__le32	pmon;
+	__le32	pERF1CTL;
+	u32	reserved[24];
+} __attribute__((packed, aligned(4)));
+
+#define SAS_DIAG_PARAM_BYTES 24
+
+/*
+ * brief the data structure of Set Device State Command
+ * use to describe MPI Set Device State Command (64 bytes)
+ */
+struct set_dev_state_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	nds;
+	u32	reserved[28];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SATA Start Command
+ * use to describe MPI SATA IO Start Command (64 bytes)
+ * Note: This structure is common for normal / encryption I/O
+ */
+
+struct sata_start_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	data_len;
+	__le32	ncqtag_atap_dir_m_dad;
+	struct host_to_dev_fis	sata_fis;
+	u32	reserved1;
+	u32	reserved2;	/* dword 11. rsvd for normal I/O. */
+				/* EPLE Descl for enc I/O */
+	u32	addr_low;	/* dword 12. rsvd for enc I/O */
+	u32	addr_high;	/* dword 13. reserved for enc I/O */
+	__le32	len;		/* dword 14: length for normal I/O. */
+				/* EPLE Desch for enc I/O */
+	__le32	esgl;		/* dword 15. rsvd for enc I/O */
+	__le32	atapi_scsi_cdb[4];	/* dword 16-19. rsvd for enc I/O */
+	/* The below fields are reserved for normal I/O */
+	__le32	key_index_mode;	/* dword 20 */
+	__le32	sector_cnt_enss;/* dword 21 */
+	__le32	keytagl;	/* dword 22 */
+	__le32	keytagh;	/* dword 23 */
+	__le32	twk_val0;	/* dword 24 */
+	__le32	twk_val1;	/* dword 25 */
+	__le32	twk_val2;	/* dword 26 */
+	__le32	twk_val3;	/* dword 27 */
+	__le32	enc_addr_low;	/* dword 28. Encryption SGL address high */
+	__le32	enc_addr_high;	/* dword 29. Encryption SGL address low */
+	__le32	enc_len;	/* dword 30. Encryption length */
+	__le32	enc_esgl;	/* dword 31. Encryption esgl bit */
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP INI TM Start Command
+ * use to describe MPI SSP INI TM Start Command (64 bytes)
+ */
+struct ssp_ini_tm_start_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	relate_tag;
+	__le32	tmf;
+	u8	lun[8];
+	__le32	ds_ads_m;
+	u32	reserved[24];
+} __attribute__((packed, aligned(4)));
+
+struct ssp_info_unit {
+	u8	lun[8];/* SCSI Logical Unit Number */
+	u8	reserved1;/* reserved */
+	u8	efb_prio_attr;
+	/* B7 : enabledFirstBurst */
+	/* B6-3 : taskPriority */
+	/* B2-0 : taskAttribute */
+	u8	reserved2;	/* reserved */
+	u8	additional_cdb_len;
+	/* B7-2 : additional_cdb_len */
+	/* B1-0 : reserved */
+	u8	cdb[16];/* The SCSI CDB up to 16 bytes length */
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP INI IO Start Command
+ * use to describe MPI SSP INI IO Start Command (64 bytes)
+ * Note: This structure is common for normal / encryption I/O
+ */
+struct ssp_ini_io_start_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	data_len;
+	__le32	dad_dir_m_tlr;
+	struct ssp_info_unit	ssp_iu;
+	__le32	addr_low;	/* dword 12: sgl low for normal I/O. */
+				/* epl_descl for encryption I/O */
+	__le32	addr_high;	/* dword 13: sgl hi for normal I/O */
+				/* dpl_descl for encryption I/O */
+	__le32	len;		/* dword 14: len for normal I/O. */
+				/* edpl_desch for encryption I/O */
+	__le32	esgl;		/* dword 15: ESGL bit for normal I/O. */
+				/* user defined tag mask for enc I/O */
+	/* The below fields are reserved for normal I/O */
+	u8	udt[12];	/* dword 16-18 */
+	__le32	sectcnt_ios;	/* dword 19 */
+	__le32	key_cmode;	/* dword 20 */
+	__le32	ks_enss;	/* dword 21 */
+	__le32	keytagl;	/* dword 22 */
+	__le32	keytagh;	/* dword 23 */
+	__le32	twk_val0;	/* dword 24 */
+	__le32	twk_val1;	/* dword 25 */
+	__le32	twk_val2;	/* dword 26 */
+	__le32	twk_val3;	/* dword 27 */
+	__le32	enc_addr_low;	/* dword 28: Encryption sgl addr low */
+	__le32	enc_addr_high;	/* dword 29: Encryption sgl addr hi */
+	__le32	enc_len;	/* dword 30: Encryption length */
+	__le32	enc_esgl;	/* dword 31: ESGL bit for encryption */
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for SSP_INI_DIF_ENC_IO COMMAND
+ * use to initiate SSP I/O operation with optional DIF/ENC
+ */
+struct ssp_dif_enc_io_req {
+	__le32	tag;
+	__le32	device_id;
+	__le32	data_len;
+	__le32	dirMTlr;
+	__le32	sspiu0;
+	__le32	sspiu1;
+	__le32	sspiu2;
+	__le32	sspiu3;
+	__le32	sspiu4;
+	__le32	sspiu5;
+	__le32	sspiu6;
+	__le32	epl_des;
+	__le32	dpl_desl_ndplr;
+	__le32	dpl_desh;
+	__le32	uum_uuv_bss_difbits;
+	u8	udt[12];
+	__le32	sectcnt_ios;
+	__le32	key_cmode;
+	__le32	ks_enss;
+	__le32	keytagl;
+	__le32	keytagh;
+	__le32	twk_val0;
+	__le32	twk_val1;
+	__le32	twk_val2;
+	__le32	twk_val3;
+	__le32	addr_low;
+	__le32	addr_high;
+	__le32	len;
+	__le32	esgl;
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Firmware download
+ * use to describe MPI FW DOWNLOAD Command (64 bytes)
+ */
+struct fw_flash_Update_req {
+	__le32	tag;
+	__le32	cur_image_offset;
+	__le32	cur_image_len;
+	__le32	total_image_len;
+	u32	reserved0[7];
+	__le32	sgl_addr_lo;
+	__le32	sgl_addr_hi;
+	__le32	len;
+	__le32	ext_reserved;
+	u32	reserved1[16];
+} __attribute__((packed, aligned(4)));
+
+#define FWFLASH_IOMB_RESERVED_LEN 0x07
+/**
+ * brief the data structure of FW_FLASH_UPDATE Response
+ * use to describe MPI FW_FLASH_UPDATE Response (64 bytes)
+ *
+ */
+ struct fw_flash_Update_resp {
+	__le32	tag;
+	__le32	status;
+	u32	reserved[13];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Get NVM Data Command
+ * use to get data from NVM in HBA(64 bytes)
+ */
+struct get_nvm_data_req {
+	__le32	tag;
+	__le32	len_ir_vpdd;
+	__le32	vpd_offset;
+	u32	reserved[8];
+	__le32	resp_addr_lo;
+	__le32	resp_addr_hi;
+	__le32	resp_len;
+	u32	reserved1[17];
+} __attribute__((packed, aligned(4)));
+
+struct set_nvm_data_req {
+	__le32	tag;
+	__le32	len_ir_vpdd;
+	__le32	vpd_offset;
+	u32	reserved[8];
+	__le32	resp_addr_lo;
+	__le32	resp_addr_hi;
+	__le32	resp_len;
+	u32	reserved1[17];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for SET CONTROLLER CONFIG COMMAND
+ * use to modify controller configuration
+ */
+struct set_ctrl_cfg_req {
+	__le32	tag;
+	__le32	cfg_pg[14];
+	u32	reserved[16];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for GET CONTROLLER CONFIG COMMAND
+ * use to get controller configuration page
+ */
+struct get_ctrl_cfg_req {
+	__le32	tag;
+	__le32	pgcd;
+	__le32	int_vec;
+	u32	reserved[28];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for KEK_MANAGEMENT COMMAND
+ * use for KEK management
+ */
+struct kek_mgmt_req {
+	__le32	tag;
+	__le32	new_curidx_ksop;
+	u32	reserved;
+	__le32	kblob[12];
+	u32	reserved1[16];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for DEK_MANAGEMENT COMMAND
+ * use for DEK management
+ */
+struct dek_mgmt_req {
+	__le32	tag;
+	__le32	kidx_dsop;
+	__le32	dekidx;
+	__le32	addr_l;
+	__le32	addr_h;
+	__le32	nent;
+	__le32	dbf_tblsize;
+	u32	reserved[24];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for SET PHY PROFILE COMMAND
+ * use to retrive phy specific information
+ */
+struct set_phy_profile_req {
+	__le32	tag;
+	__le32	ppc_phyid;
+	u32	reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for GET PHY PROFILE COMMAND
+ * use to retrive phy specific information
+ */
+struct get_phy_profile_req {
+	__le32	tag;
+	__le32	ppc_phyid;
+	__le32	profile[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for EXT FLASH PARTITION
+ * use to manage ext flash partition
+ */
+struct ext_flash_partition_req {
+	__le32	tag;
+	__le32	cmd;
+	__le32	offset;
+	__le32	len;
+	u32	reserved[7];
+	__le32	addr_low;
+	__le32	addr_high;
+	__le32	len1;
+	__le32	ext;
+	u32	reserved1[16];
+} __attribute__((packed, aligned(4)));
+
+#define TWI_DEVICE	0x0
+#define C_SEEPROM	0x1
+#define VPD_FLASH	0x4
+#define AAP1_RDUMP	0x5
+#define IOP_RDUMP	0x6
+#define EXPAN_ROM	0x7
+
+#define IPMode		0x80000000
+#define NVMD_TYPE	0x0000000F
+#define NVMD_STAT	0x0000FFFF
+#define NVMD_LEN	0xFF000000
+/**
+ * brief the data structure of Get NVMD Data Response
+ * use to describe MPI Get NVMD Data Response (64 bytes)
+ */
+struct get_nvm_data_resp {
+	__le32		tag;
+	__le32		ir_tda_bn_dps_das_nvm;
+	__le32		dlen_status;
+	__le32		nvm_data[12];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Response
+ * use to describe MPI SAS Diagnostic Start/End Response (64 bytes)
+ *
+ */
+struct sas_diag_start_end_resp {
+	__le32		tag;
+	__le32		status;
+	u32		reserved[13];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Response
+ * use to describe MPI SAS Diagnostic Execute Response (64 bytes)
+ *
+ */
+struct sas_diag_execute_resp {
+	__le32		tag;
+	__le32		cmdtype_cmddesc_phyid;
+	__le32		Status;
+	__le32		ReportData;
+	u32		reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Set Device State Response
+ * use to describe MPI Set Device State Response (64 bytes)
+ *
+ */
+struct set_dev_state_resp {
+	__le32		tag;
+	__le32		status;
+	__le32		device_id;
+	__le32		pds_nds;
+	u32		reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/* new outbound structure for spcv - begins */
+/**
+ * brief the data structure for SET CONTROLLER CONFIG COMMAND
+ * use to modify controller configuration
+ */
+struct set_ctrl_cfg_resp {
+	__le32 tag;
+	__le32 status;
+	__le32 err_qlfr_pgcd;
+	u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+struct get_ctrl_cfg_resp {
+	__le32 tag;
+	__le32 status;
+	__le32 err_qlfr;
+	__le32 confg_page[12];
+} __attribute__((packed, aligned(4)));
+
+struct kek_mgmt_resp {
+	__le32 tag;
+	__le32 status;
+	__le32 kidx_new_curr_ksop;
+	__le32 err_qlfr;
+	u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+struct dek_mgmt_resp {
+	__le32 tag;
+	__le32 status;
+	__le32 kekidx_tbls_dsop;
+	__le32 dekidx;
+	__le32 err_qlfr;
+	u32 reserved[10];
+} __attribute__((packed, aligned(4)));
+
+struct get_phy_profile_resp {
+	__le32 tag;
+	__le32 status;
+	__le32 ppc_phyid;
+	__le32 ppc_specific_rsp[12];
+} __attribute__((packed, aligned(4)));
+
+struct flash_op_ext_resp {
+	__le32 tag;
+	__le32 cmd;
+	__le32 status;
+	__le32 epart_size;
+	__le32 epart_sect_size;
+	u32 reserved[10];
+} __attribute__((packed, aligned(4)));
+
+struct set_phy_profile_resp {
+	__le32 tag;
+	__le32 status;
+	__le32 ppc_phyid;
+	__le32 ppc_specific_rsp[12];
+} __attribute__((packed, aligned(4)));
+
+struct ssp_coalesced_comp_resp {
+	__le32 coal_cnt;
+	__le32 tag0;
+	__le32 ssp_tag0;
+	__le32 tag1;
+	__le32 ssp_tag1;
+	__le32 add_tag_ssp_tag[10];
+} __attribute__((packed, aligned(4)));
+
+/* new outbound structure for spcv - ends */
+
+/* brief data structure for SAS protocol timer configuration page.
+ *
+ */
+struct SASProtocolTimerConfig {
+	__le32 pageCode;			/* 0 */
+	__le32 MST_MSI;				/* 1 */
+	__le32 STP_SSP_MCT_TMO;			/* 2 */
+	__le32 STP_FRM_TMO;			/* 3 */
+	__le32 STP_IDLE_TMO;			/* 4 */
+	__le32 OPNRJT_RTRY_INTVL;		/* 5 */
+	__le32 Data_Cmd_OPNRJT_RTRY_TMO;	/* 6 */
+	__le32 Data_Cmd_OPNRJT_RTRY_THR;	/* 7 */
+	__le32 MAX_AIP;				/* 8 */
+} __attribute__((packed, aligned(4)));
+
+typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
+
+#define NDS_BITS 0x0F
+#define PDS_BITS 0xF0
+
+/*
+ * HW Events type
+ */
+
+#define HW_EVENT_RESET_START			0x01
+#define HW_EVENT_CHIP_RESET_COMPLETE		0x02
+#define HW_EVENT_PHY_STOP_STATUS		0x03
+#define HW_EVENT_SAS_PHY_UP			0x04
+#define HW_EVENT_SATA_PHY_UP			0x05
+#define HW_EVENT_SATA_SPINUP_HOLD		0x06
+#define HW_EVENT_PHY_DOWN			0x07
+#define HW_EVENT_PORT_INVALID			0x08
+#define HW_EVENT_BROADCAST_CHANGE		0x09
+#define HW_EVENT_PHY_ERROR			0x0A
+#define HW_EVENT_BROADCAST_SES			0x0B
+#define HW_EVENT_INBOUND_CRC_ERROR		0x0C
+#define HW_EVENT_HARD_RESET_RECEIVED		0x0D
+#define HW_EVENT_MALFUNCTION			0x0E
+#define HW_EVENT_ID_FRAME_TIMEOUT		0x0F
+#define HW_EVENT_BROADCAST_EXP			0x10
+#define HW_EVENT_PHY_START_STATUS		0x11
+#define HW_EVENT_LINK_ERR_INVALID_DWORD		0x12
+#define HW_EVENT_LINK_ERR_DISPARITY_ERROR	0x13
+#define HW_EVENT_LINK_ERR_CODE_VIOLATION	0x14
+#define HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH	0x15
+#define HW_EVENT_LINK_ERR_PHY_RESET_FAILED	0x16
+#define HW_EVENT_PORT_RECOVERY_TIMER_TMO	0x17
+#define HW_EVENT_PORT_RECOVER			0x18
+#define HW_EVENT_PORT_RESET_TIMER_TMO		0x19
+#define HW_EVENT_PORT_RESET_COMPLETE		0x20
+#define EVENT_BROADCAST_ASYNCH_EVENT		0x21
+
+/* port state */
+#define PORT_NOT_ESTABLISHED			0x00
+#define PORT_VALID				0x01
+#define PORT_LOSTCOMM				0x02
+#define PORT_IN_RESET				0x04
+#define PORT_3RD_PARTY_RESET			0x07
+#define PORT_INVALID				0x08
+
+/*
+ * SSP/SMP/SATA IO Completion Status values
+ */
+
+#define IO_SUCCESS				0x00
+#define IO_ABORTED				0x01
+#define IO_OVERFLOW				0x02
+#define IO_UNDERFLOW				0x03
+#define IO_FAILED				0x04
+#define IO_ABORT_RESET				0x05
+#define IO_NOT_VALID				0x06
+#define IO_NO_DEVICE				0x07
+#define IO_ILLEGAL_PARAMETER			0x08
+#define IO_LINK_FAILURE				0x09
+#define IO_PROG_ERROR				0x0A
+
+#define IO_EDC_IN_ERROR				0x0B
+#define IO_EDC_OUT_ERROR			0x0C
+#define IO_ERROR_HW_TIMEOUT			0x0D
+#define IO_XFER_ERROR_BREAK			0x0E
+#define IO_XFER_ERROR_PHY_NOT_READY		0x0F
+#define IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED	0x10
+#define IO_OPEN_CNX_ERROR_ZONE_VIOLATION		0x11
+#define IO_OPEN_CNX_ERROR_BREAK				0x12
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS			0x13
+#define IO_OPEN_CNX_ERROR_BAD_DESTINATION		0x14
+#define IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED	0x15
+#define IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY		0x16
+#define IO_OPEN_CNX_ERROR_WRONG_DESTINATION		0x17
+/* This error code 0x18 is not used on SPCv */
+#define IO_OPEN_CNX_ERROR_UNKNOWN_ERROR			0x18
+#define IO_XFER_ERROR_NAK_RECEIVED			0x19
+#define IO_XFER_ERROR_ACK_NAK_TIMEOUT			0x1A
+#define IO_XFER_ERROR_PEER_ABORTED			0x1B
+#define IO_XFER_ERROR_RX_FRAME				0x1C
+#define IO_XFER_ERROR_DMA				0x1D
+#define IO_XFER_ERROR_CREDIT_TIMEOUT			0x1E
+#define IO_XFER_ERROR_SATA_LINK_TIMEOUT			0x1F
+#define IO_XFER_ERROR_SATA				0x20
+
+/* This error code 0x22 is not used on SPCv */
+#define IO_XFER_ERROR_ABORTED_DUE_TO_SRST		0x22
+#define IO_XFER_ERROR_REJECTED_NCQ_MODE			0x21
+#define IO_XFER_ERROR_ABORTED_NCQ_MODE			0x23
+#define IO_XFER_OPEN_RETRY_TIMEOUT			0x24
+/* This error code 0x25 is not used on SPCv */
+#define IO_XFER_SMP_RESP_CONNECTION_ERROR		0x25
+#define IO_XFER_ERROR_UNEXPECTED_PHASE			0x26
+#define IO_XFER_ERROR_XFER_RDY_OVERRUN			0x27
+#define IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED		0x28
+#define IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT		0x30
+
+/* The following error code 0x31 and 0x32 are not using (obsolete) */
+#define IO_XFER_ERROR_CMD_ISSUE_BREAK_BEFORE_ACK_NAK	0x31
+#define IO_XFER_ERROR_CMD_ISSUE_PHY_DOWN_BEFORE_ACK_NAK	0x32
+
+#define IO_XFER_ERROR_OFFSET_MISMATCH			0x34
+#define IO_XFER_ERROR_XFER_ZERO_DATA_LEN		0x35
+#define IO_XFER_CMD_FRAME_ISSUED			0x36
+#define IO_ERROR_INTERNAL_SMP_RESOURCE			0x37
+#define IO_PORT_IN_RESET				0x38
+#define IO_DS_NON_OPERATIONAL				0x39
+#define IO_DS_IN_RECOVERY				0x3A
+#define IO_TM_TAG_NOT_FOUND				0x3B
+#define IO_XFER_PIO_SETUP_ERROR				0x3C
+#define IO_SSP_EXT_IU_ZERO_LEN_ERROR			0x3D
+#define IO_DS_IN_ERROR					0x3E
+#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY		0x3F
+#define IO_ABORT_IN_PROGRESS				0x40
+#define IO_ABORT_DELAYED				0x41
+#define IO_INVALID_LENGTH				0x42
+
+/********** additional response event values *****************/
+
+#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY_ALT		0x43
+#define IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED	0x44
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO	0x45
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST		0x46
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE	0x47
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED	0x48
+#define IO_DS_INVALID					0x49
+/* WARNING: the value is not contiguous from here */
+#define IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR	0x52
+#define IO_XFER_DMA_ACTIVATE_TIMEOUT		0x53
+#define IO_XFER_ERROR_INTERNAL_CRC_ERROR	0x54
+#define MPI_IO_RQE_BUSY_FULL			0x55
+#define IO_XFER_ERR_EOB_DATA_OVERRUN		0x56
+#define IO_XFR_ERROR_INVALID_SSP_RSP_FRAME	0x57
+#define IO_OPEN_CNX_ERROR_OPEN_PREEMPTED	0x58
+
+#define MPI_ERR_IO_RESOURCE_UNAVAILABLE		0x1004
+#define MPI_ERR_ATAPI_DEVICE_BUSY		0x1024
+
+#define IO_XFR_ERROR_DEK_KEY_CACHE_MISS		0x2040
+/*
+ * An encryption IO request failed due to DEK Key Tag mismatch.
+ * The key tag supplied in the encryption IOMB does not match with
+ * the Key Tag in the referenced DEK Entry.
+ */
+#define IO_XFR_ERROR_DEK_KEY_TAG_MISMATCH	0x2041
+#define IO_XFR_ERROR_CIPHER_MODE_INVALID	0x2042
+/*
+ * An encryption I/O request failed because the initial value (IV)
+ * in the unwrapped DEK blob didn't match the IV used to unwrap it.
+ */
+#define IO_XFR_ERROR_DEK_IV_MISMATCH		0x2043
+/* An encryption I/O request failed due to an internal RAM ECC or
+ * interface error while unwrapping the DEK. */
+#define IO_XFR_ERROR_DEK_RAM_INTERFACE_ERROR	0x2044
+/* An encryption I/O request failed due to an internal RAM ECC or
+ * interface error while unwrapping the DEK. */
+#define IO_XFR_ERROR_INTERNAL_RAM		0x2045
+/*
+ * An encryption I/O request failed
+ * because the DEK index specified in the I/O was outside the bounds of
+ * the total number of entries in the host DEK table.
+ */
+#define IO_XFR_ERROR_DEK_INDEX_OUT_OF_BOUNDS0x2046
+
+/* define DIF IO response error status code */
+#define IO_XFR_ERROR_DIF_MISMATCH			0x3000
+#define IO_XFR_ERROR_DIF_APPLICATION_TAG_MISMATCH	0x3001
+#define IO_XFR_ERROR_DIF_REFERENCE_TAG_MISMATCH		0x3002
+#define IO_XFR_ERROR_DIF_CRC_MISMATCH			0x3003
+
+/* define operator management response status and error qualifier code */
+#define OPR_MGMT_OP_NOT_SUPPORTED			0x2060
+#define OPR_MGMT_MPI_ENC_ERR_OPR_PARAM_ILLEGAL		0x2061
+#define OPR_MGMT_MPI_ENC_ERR_OPR_ID_NOT_FOUND		0x2062
+#define OPR_MGMT_MPI_ENC_ERR_OPR_ROLE_NOT_MATCH		0x2063
+#define OPR_MGMT_MPI_ENC_ERR_OPR_MAX_NUM_EXCEEDED	0x2064
+#define OPR_MGMT_MPI_ENC_ERR_KEK_UNWRAP_FAIL		0x2022
+#define OPR_MGMT_MPI_ENC_ERR_NVRAM_OPERATION_FAILURE	0x2023
+/***************** additional response event values ***************/
+
+/* WARNING: This error code must always be the last number.
+ * If you add error code, modify this code also
+ * It is used as an index
+ */
+#define IO_ERROR_UNKNOWN_GENERIC			0x2023
+
+/* MSGU CONFIGURATION TABLE*/
+
+#define SPCv_MSGU_CFG_TABLE_UPDATE		0x001
+#define SPCv_MSGU_CFG_TABLE_RESET		0x002
+#define SPCv_MSGU_CFG_TABLE_FREEZE		0x004
+#define SPCv_MSGU_CFG_TABLE_UNFREEZE		0x008
+#define MSGU_IBDB_SET				0x00
+#define MSGU_HOST_INT_STATUS			0x08
+#define MSGU_HOST_INT_MASK			0x0C
+#define MSGU_IOPIB_INT_STATUS			0x18
+#define MSGU_IOPIB_INT_MASK			0x1C
+#define MSGU_IBDB_CLEAR				0x20
+
+#define MSGU_MSGU_CONTROL			0x24
+#define MSGU_ODR				0x20
+#define MSGU_ODCR				0x28
+
+#define MSGU_ODMR				0x30
+#define MSGU_ODMR_U				0x34
+#define MSGU_ODMR_CLR				0x38
+#define MSGU_ODMR_CLR_U				0x3C
+#define MSGU_OD_RSVD				0x40
+
+#define MSGU_SCRATCH_PAD_0			0x44
+#define MSGU_SCRATCH_PAD_1			0x48
+#define MSGU_SCRATCH_PAD_2			0x4C
+#define MSGU_SCRATCH_PAD_3			0x50
+#define MSGU_HOST_SCRATCH_PAD_0			0x54
+#define MSGU_HOST_SCRATCH_PAD_1			0x58
+#define MSGU_HOST_SCRATCH_PAD_2			0x5C
+#define MSGU_HOST_SCRATCH_PAD_3			0x60
+#define MSGU_HOST_SCRATCH_PAD_4			0x64
+#define MSGU_HOST_SCRATCH_PAD_5			0x68
+#define MSGU_HOST_SCRATCH_PAD_6			0x6C
+#define MSGU_HOST_SCRATCH_PAD_7			0x70
+
+/* bit definition for ODMR register */
+#define ODMR_MASK_ALL			0xFFFFFFFF/* mask all
+					interrupt vector */
+#define ODMR_CLEAR_ALL			0	/* clear all
+					interrupt vector */
+/* bit definition for ODCR register */
+#define ODCR_CLEAR_ALL			0xFFFFFFFF /* mask all
+					interrupt vector*/
+/* MSIX Interupts */
+#define MSIX_TABLE_OFFSET		0x2000
+#define MSIX_TABLE_ELEMENT_SIZE		0x10
+#define MSIX_INTERRUPT_CONTROL_OFFSET	0xC
+#define MSIX_TABLE_BASE			(MSIX_TABLE_OFFSET + \
+					MSIX_INTERRUPT_CONTROL_OFFSET)
+#define MSIX_INTERRUPT_DISABLE		0x1
+#define MSIX_INTERRUPT_ENABLE		0x0
+
+/* state definition for Scratch Pad1 register */
+#define SCRATCH_PAD_RAAE_READY		0x3
+#define SCRATCH_PAD_ILA_READY		0xC
+#define SCRATCH_PAD_BOOT_LOAD_SUCCESS	0x0
+#define SCRATCH_PAD_IOP0_READY		0xC00
+#define SCRATCH_PAD_IOP1_READY		0x3000
+
+/* boot loader state */
+#define SCRATCH_PAD1_BOOTSTATE_MASK		0x70	/* Bit 4-6 */
+#define SCRATCH_PAD1_BOOTSTATE_SUCESS		0x0	/* Load successful */
+#define SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM	0x10	/* HDA SEEPROM */
+#define SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP	0x20	/* HDA BootStrap Pins */
+#define SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET	0x30	/* HDA Soft Reset */
+#define SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR	0x40	/* HDA critical error */
+#define SCRATCH_PAD1_BOOTSTATE_R1		0x50	/* Reserved */
+#define SCRATCH_PAD1_BOOTSTATE_R2		0x60	/* Reserved */
+#define SCRATCH_PAD1_BOOTSTATE_FATAL		0x70	/* Fatal Error */
+
+ /* state definition for Scratch Pad2 register */
+#define SCRATCH_PAD2_POR		0x00	/* power on state */
+#define SCRATCH_PAD2_SFR		0x01	/* soft reset state */
+#define SCRATCH_PAD2_ERR		0x02	/* error state */
+#define SCRATCH_PAD2_RDY		0x03	/* ready state */
+#define SCRATCH_PAD2_FWRDY_RST		0x04	/* FW rdy for soft reset flag */
+#define SCRATCH_PAD2_IOPRDY_RST		0x08	/* IOP ready for soft reset */
+#define SCRATCH_PAD2_STATE_MASK		0xFFFFFFF4 /* ScratchPad 2
+ Mask, bit1-0 State */
+#define SCRATCH_PAD2_RESERVED		0x000003FC/* Scratch Pad1
+ Reserved bit 2 to 9 */
+
+#define SCRATCH_PAD_ERROR_MASK		0xFFFFFC00 /* Error mask bits */
+#define SCRATCH_PAD_STATE_MASK		0x00000003 /* State Mask bits */
+
+/* main configuration offset - byte offset */
+#define MAIN_SIGNATURE_OFFSET		0x00 /* DWORD 0x00 */
+#define MAIN_INTERFACE_REVISION		0x04 /* DWORD 0x01 */
+#define MAIN_FW_REVISION		0x08 /* DWORD 0x02 */
+#define MAIN_MAX_OUTSTANDING_IO_OFFSET	0x0C /* DWORD 0x03 */
+#define MAIN_MAX_SGL_OFFSET		0x10 /* DWORD 0x04 */
+#define MAIN_CNTRL_CAP_OFFSET		0x14 /* DWORD 0x05 */
+#define MAIN_GST_OFFSET			0x18 /* DWORD 0x06 */
+#define MAIN_IBQ_OFFSET			0x1C /* DWORD 0x07 */
+#define MAIN_OBQ_OFFSET			0x20 /* DWORD 0x08 */
+#define MAIN_IQNPPD_HPPD_OFFSET		0x24 /* DWORD 0x09 */
+
+/* 0x28 - 0x4C - RSVD */
+#define MAIN_EVENT_CRC_CHECK		0x48 /* DWORD 0x12 */
+#define MAIN_EVENT_LOG_ADDR_HI		0x50 /* DWORD 0x14 */
+#define MAIN_EVENT_LOG_ADDR_LO		0x54 /* DWORD 0x15 */
+#define MAIN_EVENT_LOG_BUFF_SIZE	0x58 /* DWORD 0x16 */
+#define MAIN_EVENT_LOG_OPTION		0x5C /* DWORD 0x17 */
+#define MAIN_PCS_EVENT_LOG_ADDR_HI	0x60 /* DWORD 0x18 */
+#define MAIN_PCS_EVENT_LOG_ADDR_LO	0x64 /* DWORD 0x19 */
+#define MAIN_PCS_EVENT_LOG_BUFF_SIZE	0x68 /* DWORD 0x1A */
+#define MAIN_PCS_EVENT_LOG_OPTION	0x6C /* DWORD 0x1B */
+#define MAIN_FATAL_ERROR_INTERRUPT	0x70 /* DWORD 0x1C */
+#define MAIN_FATAL_ERROR_RDUMP0_OFFSET	0x74 /* DWORD 0x1D */
+#define MAIN_FATAL_ERROR_RDUMP0_LENGTH	0x78 /* DWORD 0x1E */
+#define MAIN_FATAL_ERROR_RDUMP1_OFFSET	0x7C /* DWORD 0x1F */
+#define MAIN_FATAL_ERROR_RDUMP1_LENGTH	0x80 /* DWORD 0x20 */
+#define MAIN_GPIO_LED_FLAGS_OFFSET	0x84 /* DWORD 0x21 */
+#define MAIN_ANALOG_SETUP_OFFSET	0x88 /* DWORD 0x22 */
+
+#define MAIN_INT_VECTOR_TABLE_OFFSET	0x8C /* DWORD 0x23 */
+#define MAIN_SAS_PHY_ATTR_TABLE_OFFSET	0x90 /* DWORD 0x24 */
+#define MAIN_PORT_RECOVERY_TIMER	0x94 /* DWORD 0x25 */
+#define MAIN_INT_REASSERTION_DELAY	0x98 /* DWORD 0x26 */
+
+/* Gereral Status Table offset - byte offset */
+#define GST_GSTLEN_MPIS_OFFSET		0x00
+#define GST_IQ_FREEZE_STATE0_OFFSET	0x04
+#define GST_IQ_FREEZE_STATE1_OFFSET	0x08
+#define GST_MSGUTCNT_OFFSET		0x0C
+#define GST_IOPTCNT_OFFSET		0x10
+/* 0x14 - 0x34 - RSVD */
+#define GST_GPIO_INPUT_VAL		0x38
+/* 0x3c - 0x40 - RSVD */
+#define GST_RERRINFO_OFFSET0		0x44
+#define GST_RERRINFO_OFFSET1		0x48
+#define GST_RERRINFO_OFFSET2		0x4c
+#define GST_RERRINFO_OFFSET3		0x50
+#define GST_RERRINFO_OFFSET4		0x54
+#define GST_RERRINFO_OFFSET5		0x58
+#define GST_RERRINFO_OFFSET6		0x5c
+#define GST_RERRINFO_OFFSET7		0x60
+
+/* General Status Table - MPI state */
+#define GST_MPI_STATE_UNINIT		0x00
+#define GST_MPI_STATE_INIT		0x01
+#define GST_MPI_STATE_TERMINATION	0x02
+#define GST_MPI_STATE_ERROR		0x03
+#define GST_MPI_STATE_MASK		0x07
+
+/* Per SAS PHY Attributes */
+
+#define PSPA_PHYSTATE0_OFFSET		0x00 /* Dword V */
+#define PSPA_OB_HW_EVENT_PID0_OFFSET	0x04 /* DWORD V+1 */
+#define PSPA_PHYSTATE1_OFFSET		0x08 /* Dword V+2 */
+#define PSPA_OB_HW_EVENT_PID1_OFFSET	0x0C /* DWORD V+3 */
+#define PSPA_PHYSTATE2_OFFSET		0x10 /* Dword V+4 */
+#define PSPA_OB_HW_EVENT_PID2_OFFSET	0x14 /* DWORD V+5 */
+#define PSPA_PHYSTATE3_OFFSET		0x18 /* Dword V+6 */
+#define PSPA_OB_HW_EVENT_PID3_OFFSET	0x1C /* DWORD V+7 */
+#define PSPA_PHYSTATE4_OFFSET		0x20 /* Dword V+8 */
+#define PSPA_OB_HW_EVENT_PID4_OFFSET	0x24 /* DWORD V+9 */
+#define PSPA_PHYSTATE5_OFFSET		0x28 /* Dword V+10 */
+#define PSPA_OB_HW_EVENT_PID5_OFFSET	0x2C /* DWORD V+11 */
+#define PSPA_PHYSTATE6_OFFSET		0x30 /* Dword V+12 */
+#define PSPA_OB_HW_EVENT_PID6_OFFSET	0x34 /* DWORD V+13 */
+#define PSPA_PHYSTATE7_OFFSET		0x38 /* Dword V+14 */
+#define PSPA_OB_HW_EVENT_PID7_OFFSET	0x3C /* DWORD V+15 */
+#define PSPA_PHYSTATE8_OFFSET		0x40 /* DWORD V+16 */
+#define PSPA_OB_HW_EVENT_PID8_OFFSET	0x44 /* DWORD V+17 */
+#define PSPA_PHYSTATE9_OFFSET		0x48 /* DWORD V+18 */
+#define PSPA_OB_HW_EVENT_PID9_OFFSET	0x4C /* DWORD V+19 */
+#define PSPA_PHYSTATE10_OFFSET		0x50 /* DWORD V+20 */
+#define PSPA_OB_HW_EVENT_PID10_OFFSET	0x54 /* DWORD V+21 */
+#define PSPA_PHYSTATE11_OFFSET		0x58 /* DWORD V+22 */
+#define PSPA_OB_HW_EVENT_PID11_OFFSET	0x5C /* DWORD V+23 */
+#define PSPA_PHYSTATE12_OFFSET		0x60 /* DWORD V+24 */
+#define PSPA_OB_HW_EVENT_PID12_OFFSET	0x64 /* DWORD V+25 */
+#define PSPA_PHYSTATE13_OFFSET		0x68 /* DWORD V+26 */
+#define PSPA_OB_HW_EVENT_PID13_OFFSET	0x6c /* DWORD V+27 */
+#define PSPA_PHYSTATE14_OFFSET		0x70 /* DWORD V+28 */
+#define PSPA_OB_HW_EVENT_PID14_OFFSET	0x74 /* DWORD V+29 */
+#define PSPA_PHYSTATE15_OFFSET		0x78 /* DWORD V+30 */
+#define PSPA_OB_HW_EVENT_PID15_OFFSET	0x7c /* DWORD V+31 */
+/* end PSPA */
+
+/* inbound queue configuration offset - byte offset */
+#define IB_PROPERITY_OFFSET		0x00
+#define IB_BASE_ADDR_HI_OFFSET		0x04
+#define IB_BASE_ADDR_LO_OFFSET		0x08
+#define IB_CI_BASE_ADDR_HI_OFFSET	0x0C
+#define IB_CI_BASE_ADDR_LO_OFFSET	0x10
+#define IB_PIPCI_BAR			0x14
+#define IB_PIPCI_BAR_OFFSET		0x18
+#define IB_RESERVED_OFFSET		0x1C
+
+/* outbound queue configuration offset - byte offset */
+#define OB_PROPERITY_OFFSET		0x00
+#define OB_BASE_ADDR_HI_OFFSET		0x04
+#define OB_BASE_ADDR_LO_OFFSET		0x08
+#define OB_PI_BASE_ADDR_HI_OFFSET	0x0C
+#define OB_PI_BASE_ADDR_LO_OFFSET	0x10
+#define OB_CIPCI_BAR			0x14
+#define OB_CIPCI_BAR_OFFSET		0x18
+#define OB_INTERRUPT_COALES_OFFSET	0x1C
+#define OB_DYNAMIC_COALES_OFFSET	0x20
+#define OB_PROPERTY_INT_ENABLE		0x40000000
+
+#define MBIC_NMI_ENABLE_VPE0_IOP	0x000418
+#define MBIC_NMI_ENABLE_VPE0_AAP1	0x000418
+/* PCIE registers - BAR2(0x18), BAR1(win) 0x010000 */
+#define PCIE_EVENT_INTERRUPT_ENABLE	0x003040
+#define PCIE_EVENT_INTERRUPT		0x003044
+#define PCIE_ERROR_INTERRUPT_ENABLE	0x003048
+#define PCIE_ERROR_INTERRUPT		0x00304C
+
+/* SPCV soft reset */
+#define SPC_REG_SOFT_RESET 0x00001000
+#define SPCv_NORMAL_RESET_VALUE		0x1
+
+#define SPCv_SOFT_RESET_READ_MASK		0xC0
+#define SPCv_SOFT_RESET_NO_RESET		0x0
+#define SPCv_SOFT_RESET_NORMAL_RESET_OCCURED	0x40
+#define SPCv_SOFT_RESET_HDA_MODE_OCCURED	0x80
+#define SPCv_SOFT_RESET_CHIP_RESET_OCCURED	0xC0
+
+/* signature definition for host scratch pad0 register */
+#define SPC_SOFT_RESET_SIGNATURE	0x252acbcd
+/* Signature for Soft Reset */
+
+/* SPC Reset register - BAR4(0x20), BAR2(win) (need dynamic mapping) */
+#define SPC_REG_RESET			0x000000/* reset register */
+
+/* bit definition for SPC_RESET register */
+#define SPC_REG_RESET_OSSP		0x00000001
+#define SPC_REG_RESET_RAAE		0x00000002
+#define SPC_REG_RESET_PCS_SPBC		0x00000004
+#define SPC_REG_RESET_PCS_IOP_SS	0x00000008
+#define SPC_REG_RESET_PCS_AAP1_SS	0x00000010
+#define SPC_REG_RESET_PCS_AAP2_SS	0x00000020
+#define SPC_REG_RESET_PCS_LM		0x00000040
+#define SPC_REG_RESET_PCS		0x00000080
+#define SPC_REG_RESET_GSM		0x00000100
+#define SPC_REG_RESET_DDR2		0x00010000
+#define SPC_REG_RESET_BDMA_CORE		0x00020000
+#define SPC_REG_RESET_BDMA_SXCBI	0x00040000
+#define SPC_REG_RESET_PCIE_AL_SXCBI	0x00080000
+#define SPC_REG_RESET_PCIE_PWR		0x00100000
+#define SPC_REG_RESET_PCIE_SFT		0x00200000
+#define SPC_REG_RESET_PCS_SXCBI		0x00400000
+#define SPC_REG_RESET_LMS_SXCBI		0x00800000
+#define SPC_REG_RESET_PMIC_SXCBI	0x01000000
+#define SPC_REG_RESET_PMIC_CORE		0x02000000
+#define SPC_REG_RESET_PCIE_PC_SXCBI	0x04000000
+#define SPC_REG_RESET_DEVICE		0x80000000
+
+/* registers for BAR Shifting - BAR2(0x18), BAR1(win) */
+#define SPCV_IBW_AXI_TRANSLATION_LOW	0x001010
+
+#define MBIC_AAP1_ADDR_BASE		0x060000
+#define MBIC_IOP_ADDR_BASE		0x070000
+#define GSM_ADDR_BASE			0x0700000
+/* Dynamic map through Bar4 - 0x00700000 */
+#define GSM_CONFIG_RESET		0x00000000
+#define RAM_ECC_DB_ERR			0x00000018
+#define GSM_READ_ADDR_PARITY_INDIC	0x00000058
+#define GSM_WRITE_ADDR_PARITY_INDIC	0x00000060
+#define GSM_WRITE_DATA_PARITY_INDIC	0x00000068
+#define GSM_READ_ADDR_PARITY_CHECK	0x00000038
+#define GSM_WRITE_ADDR_PARITY_CHECK	0x00000040
+#define GSM_WRITE_DATA_PARITY_CHECK	0x00000048
+
+#define RB6_ACCESS_REG			0x6A0000
+#define HDAC_EXEC_CMD			0x0002
+#define HDA_C_PA			0xcb
+#define HDA_SEQ_ID_BITS			0x00ff0000
+#define HDA_GSM_OFFSET_BITS		0x00FFFFFF
+#define HDA_GSM_CMD_OFFSET_BITS		0x42C0
+#define HDA_GSM_RSP_OFFSET_BITS		0x42E0
+
+#define MBIC_AAP1_ADDR_BASE		0x060000
+#define MBIC_IOP_ADDR_BASE		0x070000
+#define GSM_ADDR_BASE			0x0700000
+#define SPC_TOP_LEVEL_ADDR_BASE		0x000000
+#define GSM_CONFIG_RESET_VALUE		0x00003b00
+#define GPIO_ADDR_BASE			0x00090000
+#define GPIO_GPIO_0_0UTPUT_CTL_OFFSET	0x0000010c
+
+/* RB6 offset */
+#define SPC_RB6_OFFSET			0x80C0
+/* Magic number of soft reset for RB6 */
+#define RB6_MAGIC_NUMBER_RST		0x1234
+
+/* Device Register status */
+#define DEVREG_SUCCESS					0x00
+#define DEVREG_FAILURE_OUT_OF_RESOURCE			0x01
+#define DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED	0x02
+#define DEVREG_FAILURE_INVALID_PHY_ID			0x03
+#define DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED	0x04
+#define DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE		0x05
+#define DEVREG_FAILURE_PORT_NOT_VALID_STATE		0x06
+#define DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID		0x07
+
+
+#define MEMBASE_II_SHIFT_REGISTER       0x1010
+#endif