Linux-libre 4.3.2-gnu

7 files changed, 122 insertions, 40 deletions

diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
index 74a4bb9af..f14ec6e04 100644
--- a/drivers/scsi/pm8001/pm8001_defs.h
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -49,13 +49,15 @@ enum chip_flavors {
 	chip_8019,
 	chip_8074,
 	chip_8076,
-	chip_8077
+	chip_8077,
+	chip_8006,
 };
 
 enum phy_speed {
 	PHY_SPEED_15 = 0x01,
 	PHY_SPEED_30 = 0x02,
 	PHY_SPEED_60 = 0x04,
+	PHY_SPEED_120 = 0x08,
 };
 
 enum data_direction {
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 96dcc097a..04e67a190 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2642,6 +2642,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
 	default:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("Unknown status 0x%x\n", status));
@@ -3263,6 +3264,10 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
 	struct sas_phy *sas_phy = phy->sas_phy.phy;
 
 	switch (link_rate) {
+	case PHY_SPEED_120:
+		phy->sas_phy.linkrate = SAS_LINK_RATE_12_0_GBPS;
+		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_12_0_GBPS;
+		break;
 	case PHY_SPEED_60:
 		phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
 		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index a132f2664..5c0356fb6 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -57,6 +57,7 @@ static const struct pm8001_chip_info pm8001_chips[] = {
 	[chip_8074] = {0,  8, &pm8001_80xx_dispatch,},
 	[chip_8076] = {0,  16, &pm8001_80xx_dispatch,},
 	[chip_8077] = {0,  16, &pm8001_80xx_dispatch,},
+	[chip_8006] = {0,  16, &pm8001_80xx_dispatch,},
 };
 static int pm8001_id;
 
@@ -1107,6 +1108,8 @@ err_out_enable:
  */
 static struct pci_device_id pm8001_pci_table[] = {
 	{ PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
+	{ PCI_VDEVICE(PMC_Sierra, 0x8006), chip_8006 },
+	{ PCI_VDEVICE(ADAPTEC2, 0x8006), chip_8006 },
 	{ PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
 	/* Support for SPC/SPCv/SPCve controllers */
 	{ PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
@@ -1217,7 +1220,7 @@ MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
 MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
 MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
 MODULE_DESCRIPTION(
-		"PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 "
+		"PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077 "
 		"SAS/SATA controller driver");
 MODULE_VERSION(DRV_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index b93f289b4..949198c01 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -790,6 +790,7 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
 		ccb->device = pm8001_dev;
 		ccb->ccb_tag = ccb_tag;
 		ccb->task = task;
+		ccb->n_elem = 0;
 
 		res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
 			pm8001_dev, flag, task_tag, ccb_tag);
@@ -975,19 +976,27 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
 	phy = sas_get_local_phy(dev);
 
 	if (dev_is_sata(dev)) {
-		DECLARE_COMPLETION_ONSTACK(completion_setstate);
 		if (scsi_is_sas_phy_local(phy)) {
 			rc = 0;
 			goto out;
 		}
 		rc = sas_phy_reset(phy, 1);
+		if (rc) {
+			PM8001_EH_DBG(pm8001_ha,
+			pm8001_printk("phy reset failed for device %x\n"
+			"with rc %d\n", pm8001_dev->device_id, rc));
+			rc = TMF_RESP_FUNC_FAILED;
+			goto out;
+		}
 		msleep(2000);
 		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 			dev, 1, 0);
-		pm8001_dev->setds_completion = &completion_setstate;
-		rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
-			pm8001_dev, 0x01);
-		wait_for_completion(&completion_setstate);
+		if (rc) {
+			PM8001_EH_DBG(pm8001_ha,
+			pm8001_printk("task abort failed %x\n"
+			"with rc %d\n", pm8001_dev->device_id, rc));
+			rc = TMF_RESP_FUNC_FAILED;
+		}
 	} else {
 		rc = sas_phy_reset(phy, 1);
 		msleep(2000);
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 8dd8b7840..e2e97db38 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -58,7 +58,7 @@
 #include "pm8001_defs.h"
 
 #define DRV_NAME		"pm80xx"
-#define DRV_VERSION		"0.1.37"
+#define DRV_VERSION		"0.1.38"
 #define PM8001_FAIL_LOGGING	0x01 /* Error message logging */
 #define PM8001_INIT_LOGGING	0x02 /* driver init logging */
 #define PM8001_DISC_LOGGING	0x04 /* discovery layer logging */
@@ -241,7 +241,7 @@ struct pm8001_chip_info {
 struct pm8001_port {
 	struct asd_sas_port	sas_port;
 	u8			port_attached;
-	u8			wide_port_phymap;
+	u16			wide_port_phymap;
 	u8			port_state;
 	struct list_head	list;
 };
@@ -569,6 +569,14 @@ struct pm8001_fw_image_header {
 #define	NCQ_READ_LOG_FLAG			0x80000000
 #define	NCQ_ABORT_ALL_FLAG			0x40000000
 #define	NCQ_2ND_RLE_FLAG			0x20000000
+
+/* Device states */
+#define DS_OPERATIONAL				0x01
+#define DS_PORT_IN_RESET			0x02
+#define DS_IN_RECOVERY				0x03
+#define DS_IN_ERROR				0x04
+#define DS_NON_OPERATIONAL			0x07
+
 /**
  * brief param structure for firmware flash update.
  */
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 05cce463a..9a389f150 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -309,6 +309,9 @@ static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
 		pm8001_mr32(address, MAIN_INT_VECTOR_TABLE_OFFSET);
 	pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset =
 		pm8001_mr32(address, MAIN_SAS_PHY_ATTR_TABLE_OFFSET);
+	/* read port recover and reset timeout */
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer =
+		pm8001_mr32(address, MAIN_PORT_RECOVERY_TIMER);
 }
 
 /**
@@ -585,6 +588,12 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
 		pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
 	pm8001_mw32(address, MAIN_INT_REASSERTION_DELAY,
 		pm8001_ha->main_cfg_tbl.pm80xx_tbl.interrupt_reassertion_delay);
+
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer &= 0xffff0000;
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer |=
+							PORT_RECOVERY_TIMEOUT;
+	pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
+			pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
 }
 
 /**
@@ -843,6 +852,7 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
 	int rc;
 	u32 tag;
 	u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+	u32 page_code;
 
 	memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
 	rc = pm8001_tag_alloc(pm8001_ha, &tag);
@@ -851,8 +861,14 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
 
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
 	payload.tag = cpu_to_le32(tag);
+
+	if (IS_SPCV_12G(pm8001_ha->pdev))
+		page_code = THERMAL_PAGE_CODE_7H;
+	else
+		page_code = THERMAL_PAGE_CODE_8H;
+
 	payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) |
-			(THERMAL_ENABLE << 8) | THERMAL_OP_CODE;
+				(THERMAL_ENABLE << 8) | page_code;
 	payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
 
 	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
@@ -1593,6 +1609,13 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
 		break;
+	case IO_XFER_ERROR_INVALID_SSP_RSP_FRAME:
+		PM8001_IO_DBG(pm8001_ha,
+			pm8001_printk("IO_XFER_ERROR_INVALID_SSP_RSP_FRAME\n"));
+		ts->resp = SAS_TASK_COMPLETE;
+		ts->stat = SAS_OPEN_REJECT;
+		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
 	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
 		PM8001_IO_DBG(pm8001_ha,
 		pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
@@ -2314,6 +2337,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		ts->resp = SAS_TASK_COMPLETE;
 		ts->stat = SAS_OPEN_REJECT;
 		ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+		break;
 	default:
 		PM8001_IO_DBG(pm8001_ha,
 			pm8001_printk("Unknown status 0x%x\n", status));
@@ -2829,6 +2853,32 @@ static void pm80xx_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
 static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
 	u32 phyId, u32 phy_op);
 
+static void hw_event_port_recover(struct pm8001_hba_info *pm8001_ha,
+					void *piomb)
+{
+	struct hw_event_resp *pPayload = (struct hw_event_resp *)(piomb + 4);
+	u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+	u8 phy_id = (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+	u32 lr_status_evt_portid =
+		le32_to_cpu(pPayload->lr_status_evt_portid);
+	u8 deviceType = pPayload->sas_identify.dev_type;
+	u8 link_rate = (u8)((lr_status_evt_portid & 0xF0000000) >> 28);
+	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+	u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+	struct pm8001_port *port = &pm8001_ha->port[port_id];
+
+	if (deviceType == SAS_END_DEVICE) {
+		pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id,
+					PHY_NOTIFY_ENABLE_SPINUP);
+	}
+
+	port->wide_port_phymap |= (1U << phy_id);
+	pm8001_get_lrate_mode(phy, link_rate);
+	phy->sas_phy.oob_mode = SAS_OOB_MODE;
+	phy->phy_state = PHY_STATE_LINK_UP_SPCV;
+	phy->phy_attached = 1;
+}
+
 /**
  * hw_event_sas_phy_up -FW tells me a SAS phy up event.
  * @pm8001_ha: our hba card information
@@ -2856,6 +2906,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	unsigned long flags;
 	u8 deviceType = pPayload->sas_identify.dev_type;
 	port->port_state = portstate;
+	port->wide_port_phymap |= (1U << phy_id);
 	phy->phy_state = PHY_STATE_LINK_UP_SPCV;
 	PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
 		"portid:%d; phyid:%d; linkrate:%d; "
@@ -2981,7 +3032,6 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	struct pm8001_port *port = &pm8001_ha->port[port_id];
 	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
 	port->port_state = portstate;
-	phy->phy_type = 0;
 	phy->identify.device_type = 0;
 	phy->phy_attached = 0;
 	memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE);
@@ -2993,9 +3043,13 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
 			pm8001_printk(" PortInvalid portID %d\n", port_id));
 		PM8001_MSG_DBG(pm8001_ha,
 			pm8001_printk(" Last phy Down and port invalid\n"));
-		port->port_attached = 0;
-		pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
-			port_id, phy_id, 0, 0);
+		if (phy->phy_type & PORT_TYPE_SATA) {
+			phy->phy_type = 0;
+			port->port_attached = 0;
+			pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+					port_id, phy_id, 0, 0);
+		}
+		sas_phy_disconnected(&phy->sas_phy);
 		break;
 	case PORT_IN_RESET:
 		PM8001_MSG_DBG(pm8001_ha,
@@ -3003,22 +3057,26 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		break;
 	case PORT_NOT_ESTABLISHED:
 		PM8001_MSG_DBG(pm8001_ha,
-			pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
+			pm8001_printk(" Phy Down and PORT_NOT_ESTABLISHED\n"));
 		port->port_attached = 0;
 		break;
 	case PORT_LOSTCOMM:
 		PM8001_MSG_DBG(pm8001_ha,
-			pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
+			pm8001_printk(" Phy Down and PORT_LOSTCOMM\n"));
 		PM8001_MSG_DBG(pm8001_ha,
 			pm8001_printk(" Last phy Down and port invalid\n"));
-		port->port_attached = 0;
-		pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
-			port_id, phy_id, 0, 0);
+		if (phy->phy_type & PORT_TYPE_SATA) {
+			port->port_attached = 0;
+			phy->phy_type = 0;
+			pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+					port_id, phy_id, 0, 0);
+		}
+		sas_phy_disconnected(&phy->sas_phy);
 		break;
 	default:
 		port->port_attached = 0;
 		PM8001_MSG_DBG(pm8001_ha,
-			pm8001_printk(" phy Down and(default) = 0x%x\n",
+			pm8001_printk(" Phy Down and(default) = 0x%x\n",
 			portstate));
 		break;
 
@@ -3084,7 +3142,7 @@ static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
  */
 static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 {
-	unsigned long flags;
+	unsigned long flags, i;
 	struct hw_event_resp *pPayload =
 		(struct hw_event_resp *)(piomb + 4);
 	u32 lr_status_evt_portid =
@@ -3097,9 +3155,9 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		(u16)((lr_status_evt_portid & 0x00FFFF00) >> 8);
 	u8 status =
 		(u8)((lr_status_evt_portid & 0x0F000000) >> 24);
-
 	struct sas_ha_struct *sas_ha = pm8001_ha->sas;
 	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+	struct pm8001_port *port = &pm8001_ha->port[port_id];
 	struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
 	PM8001_MSG_DBG(pm8001_ha,
 		pm8001_printk("portid:%d phyid:%d event:0x%x status:0x%x\n",
@@ -3125,7 +3183,9 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	case HW_EVENT_PHY_DOWN:
 		PM8001_MSG_DBG(pm8001_ha,
 			pm8001_printk("HW_EVENT_PHY_DOWN\n"));
-		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+		if (phy->phy_type & PORT_TYPE_SATA)
+			sas_ha->notify_phy_event(&phy->sas_phy,
+				PHYE_LOSS_OF_SIGNAL);
 		phy->phy_attached = 0;
 		phy->phy_state = 0;
 		hw_event_phy_down(pm8001_ha, piomb);
@@ -3169,9 +3229,6 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 			pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
 		pm80xx_hw_event_ack_req(pm8001_ha, 0,
 			HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
-		sas_phy_disconnected(sas_phy);
-		phy->phy_attached = 0;
-		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
 		break;
 	case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
 		PM8001_MSG_DBG(pm8001_ha,
@@ -3179,9 +3236,6 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		pm80xx_hw_event_ack_req(pm8001_ha, 0,
 			HW_EVENT_LINK_ERR_DISPARITY_ERROR,
 			port_id, phy_id, 0, 0);
-		sas_phy_disconnected(sas_phy);
-		phy->phy_attached = 0;
-		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
 		break;
 	case HW_EVENT_LINK_ERR_CODE_VIOLATION:
 		PM8001_MSG_DBG(pm8001_ha,
@@ -3189,9 +3243,6 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		pm80xx_hw_event_ack_req(pm8001_ha, 0,
 			HW_EVENT_LINK_ERR_CODE_VIOLATION,
 			port_id, phy_id, 0, 0);
-		sas_phy_disconnected(sas_phy);
-		phy->phy_attached = 0;
-		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
 		break;
 	case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
 		PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
@@ -3199,9 +3250,6 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		pm80xx_hw_event_ack_req(pm8001_ha, 0,
 			HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
 			port_id, phy_id, 0, 0);
-		sas_phy_disconnected(sas_phy);
-		phy->phy_attached = 0;
-		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
 		break;
 	case HW_EVENT_MALFUNCTION:
 		PM8001_MSG_DBG(pm8001_ha,
@@ -3257,13 +3305,19 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		pm80xx_hw_event_ack_req(pm8001_ha, 0,
 			HW_EVENT_PORT_RECOVERY_TIMER_TMO,
 			port_id, phy_id, 0, 0);
-		sas_phy_disconnected(sas_phy);
-		phy->phy_attached = 0;
-		sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+		for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+			if (port->wide_port_phymap & (1 << i)) {
+				phy = &pm8001_ha->phy[i];
+				sas_ha->notify_phy_event(&phy->sas_phy,
+						PHYE_LOSS_OF_SIGNAL);
+				port->wide_port_phymap &= ~(1 << i);
+			}
+		}
 		break;
 	case HW_EVENT_PORT_RECOVER:
 		PM8001_MSG_DBG(pm8001_ha,
 			pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
+		hw_event_port_recover(pm8001_ha, piomb);
 		break;
 	case HW_EVENT_PORT_RESET_COMPLETE:
 		PM8001_MSG_DBG(pm8001_ha,
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 9970a3857..7a443bad6 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -177,7 +177,8 @@
 /* Thermal related */
 #define	THERMAL_ENABLE			0x1
 #define	THERMAL_LOG_ENABLE		0x1
-#define THERMAL_OP_CODE			0x6
+#define THERMAL_PAGE_CODE_7H		0x6
+#define THERMAL_PAGE_CODE_8H		0x7
 #define LTEMPHIL			 70
 #define RTEMPHIL			100
 
@@ -1174,7 +1175,7 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
 #define IO_XFER_ERROR_INTERNAL_CRC_ERROR	0x54
 #define MPI_IO_RQE_BUSY_FULL			0x55
 #define IO_XFER_ERR_EOB_DATA_OVERRUN		0x56
-#define IO_XFR_ERROR_INVALID_SSP_RSP_FRAME	0x57
+#define IO_XFER_ERROR_INVALID_SSP_RSP_FRAME	0x57
 #define IO_OPEN_CNX_ERROR_OPEN_PREEMPTED	0x58
 
 #define MPI_ERR_IO_RESOURCE_UNAVAILABLE		0x1004