Linux-libre 4.1.5-gnupck-4.1.5-gnu

1 files changed, 115 insertions, 26 deletions

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 285cb204f..998498e23 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2924,6 +2924,7 @@ qla2x00_rport_del(void *data)
 	struct fc_rport *rport;
 	scsi_qla_host_t *vha = fcport->vha;
 	unsigned long flags;
+	unsigned long vha_flags;
 
 	spin_lock_irqsave(fcport->vha->host->host_lock, flags);
 	rport = fcport->drport ? fcport->drport: fcport->rport;
@@ -2935,7 +2936,9 @@ qla2x00_rport_del(void *data)
 		 * Release the target mode FC NEXUS in qla_target.c code
 		 * if target mod is enabled.
 		 */
+		spin_lock_irqsave(&vha->hw->hardware_lock, vha_flags);
 		qlt_fc_port_deleted(vha, fcport);
+		spin_unlock_irqrestore(&vha->hw->hardware_lock, vha_flags);
 	}
 }
 
@@ -3303,6 +3306,7 @@ qla2x00_reg_remote_port(scsi_qla_host_t *vha, fc_port_t *fcport)
 	 * Create target mode FC NEXUS in qla_target.c if target mode is
 	 * enabled..
 	 */
+
 	qlt_fc_port_added(vha, fcport);
 
 	spin_lock_irqsave(fcport->vha->host->host_lock, flags);
@@ -3460,20 +3464,43 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
 			if ((fcport->flags & FCF_FABRIC_DEVICE) == 0)
 				continue;
 
-			if (fcport->scan_state == QLA_FCPORT_SCAN &&
-			    atomic_read(&fcport->state) == FCS_ONLINE) {
-				qla2x00_mark_device_lost(vha, fcport,
-				    ql2xplogiabsentdevice, 0);
-				if (fcport->loop_id != FC_NO_LOOP_ID &&
-				    (fcport->flags & FCF_FCP2_DEVICE) == 0 &&
-				    fcport->port_type != FCT_INITIATOR &&
-				    fcport->port_type != FCT_BROADCAST) {
-					ha->isp_ops->fabric_logout(vha,
-					    fcport->loop_id,
-					    fcport->d_id.b.domain,
-					    fcport->d_id.b.area,
-					    fcport->d_id.b.al_pa);
-					qla2x00_clear_loop_id(fcport);
+			if (fcport->scan_state == QLA_FCPORT_SCAN) {
+				if (qla_ini_mode_enabled(base_vha) &&
+				    atomic_read(&fcport->state) == FCS_ONLINE) {
+					qla2x00_mark_device_lost(vha, fcport,
+					    ql2xplogiabsentdevice, 0);
+					if (fcport->loop_id != FC_NO_LOOP_ID &&
+					    (fcport->flags & FCF_FCP2_DEVICE) == 0 &&
+					    fcport->port_type != FCT_INITIATOR &&
+					    fcport->port_type != FCT_BROADCAST) {
+						ha->isp_ops->fabric_logout(vha,
+						    fcport->loop_id,
+						    fcport->d_id.b.domain,
+						    fcport->d_id.b.area,
+						    fcport->d_id.b.al_pa);
+						qla2x00_clear_loop_id(fcport);
+					}
+				} else if (!qla_ini_mode_enabled(base_vha)) {
+					/*
+					 * In target mode, explicitly kill
+					 * sessions and log out of devices
+					 * that are gone, so that we don't
+					 * end up with an initiator using the
+					 * wrong ACL (if the fabric recycles
+					 * an FC address and we have a stale
+					 * session around) and so that we don't
+					 * report initiators that are no longer
+					 * on the fabric.
+					 */
+					ql_dbg(ql_dbg_tgt_mgt, vha, 0xf077,
+					    "port gone, logging out/killing session: "
+					    "%8phC state 0x%x flags 0x%x fc4_type 0x%x "
+					    "scan_state %d\n",
+					    fcport->port_name,
+					    atomic_read(&fcport->state),
+					    fcport->flags, fcport->fc4_type,
+					    fcport->scan_state);
+					qlt_fc_port_deleted(vha, fcport);
 				}
 			}
 		}
@@ -3494,6 +3521,28 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
 			    (fcport->flags & FCF_LOGIN_NEEDED) == 0)
 				continue;
 
+			/*
+			 * If we're not an initiator, skip looking for devices
+			 * and logging in.  There's no reason for us to do it,
+			 * and it seems to actively cause problems in target
+			 * mode if we race with the initiator logging into us
+			 * (we might get the "port ID used" status back from
+			 * our login command and log out the initiator, which
+			 * seems to cause havoc).
+			 */
+			if (!qla_ini_mode_enabled(base_vha)) {
+				if (fcport->scan_state == QLA_FCPORT_FOUND) {
+					ql_dbg(ql_dbg_tgt_mgt, vha, 0xf078,
+					    "port %8phC state 0x%x flags 0x%x fc4_type 0x%x "
+					    "scan_state %d (initiator mode disabled; skipping "
+					    "login)\n", fcport->port_name,
+					    atomic_read(&fcport->state),
+					    fcport->flags, fcport->fc4_type,
+					    fcport->scan_state);
+				}
+				continue;
+			}
+
 			if (fcport->loop_id == FC_NO_LOOP_ID) {
 				fcport->loop_id = next_loopid;
 				rval = qla2x00_find_new_loop_id(
@@ -3520,16 +3569,38 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
 			    test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
 				break;
 
-			/* Find a new loop ID to use. */
-			fcport->loop_id = next_loopid;
-			rval = qla2x00_find_new_loop_id(base_vha, fcport);
-			if (rval != QLA_SUCCESS) {
-				/* Ran out of IDs to use */
-				break;
-			}
+			/*
+			 * If we're not an initiator, skip looking for devices
+			 * and logging in.  There's no reason for us to do it,
+			 * and it seems to actively cause problems in target
+			 * mode if we race with the initiator logging into us
+			 * (we might get the "port ID used" status back from
+			 * our login command and log out the initiator, which
+			 * seems to cause havoc).
+			 */
+			if (qla_ini_mode_enabled(base_vha)) {
+				/* Find a new loop ID to use. */
+				fcport->loop_id = next_loopid;
+				rval = qla2x00_find_new_loop_id(base_vha,
+				    fcport);
+				if (rval != QLA_SUCCESS) {
+					/* Ran out of IDs to use */
+					break;
+				}
 
-			/* Login and update database */
-			qla2x00_fabric_dev_login(vha, fcport, &next_loopid);
+				/* Login and update database */
+				qla2x00_fabric_dev_login(vha, fcport,
+				    &next_loopid);
+			} else {
+				ql_dbg(ql_dbg_tgt_mgt, vha, 0xf079,
+					"new port %8phC state 0x%x flags 0x%x fc4_type "
+					"0x%x scan_state %d (initiator mode disabled; "
+					"skipping login)\n",
+					fcport->port_name,
+					atomic_read(&fcport->state),
+					fcport->flags, fcport->fc4_type,
+					fcport->scan_state);
+			}
 
 			list_move_tail(&fcport->list, &vha->vp_fcports);
 		}
@@ -3725,11 +3796,12 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
 			fcport->fp_speed = new_fcport->fp_speed;
 
 			/*
-			 * If address the same and state FCS_ONLINE, nothing
-			 * changed.
+			 * If address the same and state FCS_ONLINE
+			 * (or in target mode), nothing changed.
 			 */
 			if (fcport->d_id.b24 == new_fcport->d_id.b24 &&
-			    atomic_read(&fcport->state) == FCS_ONLINE) {
+			    (atomic_read(&fcport->state) == FCS_ONLINE ||
+			     !qla_ini_mode_enabled(base_vha))) {
 				break;
 			}
 
@@ -3749,6 +3821,22 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
 			 * Log it out if still logged in and mark it for
 			 * relogin later.
 			 */
+			if (!qla_ini_mode_enabled(base_vha)) {
+				ql_dbg(ql_dbg_tgt_mgt, vha, 0xf080,
+					 "port changed FC ID, %8phC"
+					 " old %x:%x:%x (loop_id 0x%04x)-> new %x:%x:%x\n",
+					 fcport->port_name,
+					 fcport->d_id.b.domain,
+					 fcport->d_id.b.area,
+					 fcport->d_id.b.al_pa,
+					 fcport->loop_id,
+					 new_fcport->d_id.b.domain,
+					 new_fcport->d_id.b.area,
+					 new_fcport->d_id.b.al_pa);
+				fcport->d_id.b24 = new_fcport->d_id.b24;
+				break;
+			}
+
 			fcport->d_id.b24 = new_fcport->d_id.b24;
 			fcport->flags |= FCF_LOGIN_NEEDED;
 			if (fcport->loop_id != FC_NO_LOOP_ID &&
@@ -3768,6 +3856,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
 		if (found)
 			continue;
 		/* If device was not in our fcports list, then add it. */
+		new_fcport->scan_state = QLA_FCPORT_FOUND;
 		list_add_tail(&new_fcport->list, new_fcports);
 
 		/* Allocate a new replacement fcport. */