Linux-libre 4.4-gnupck-4.4-gnu

153 files changed, 8086 insertions, 33940 deletions

diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index a209c3418..d4c285688 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -325,7 +325,6 @@ NCR_700_detect(struct scsi_host_template *tpnt,
 	tpnt->slave_destroy = NCR_700_slave_destroy;
 	tpnt->slave_alloc = NCR_700_slave_alloc;
 	tpnt->change_queue_depth = NCR_700_change_queue_depth;
-	tpnt->use_blk_tags = 1;
 
 	if(tpnt->name == NULL)
 		tpnt->name = "53c700";
@@ -1107,7 +1106,9 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
 			BUG();
 		}
 		if(hostdata->msgin[1] == A_SIMPLE_TAG_MSG) {
-			struct scsi_cmnd *SCp = scsi_find_tag(SDp, hostdata->msgin[2]);
+			struct scsi_cmnd *SCp;
+
+			SCp = scsi_host_find_tag(SDp->host, hostdata->msgin[2]);
 			if(unlikely(SCp == NULL)) {
 				printk(KERN_ERR "scsi%d: (%d:%d) no saved request for tag %d\n", 
 				       host->host_no, reselection_id, lun, hostdata->msgin[2]);
@@ -1119,7 +1120,9 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
 				"reselection is tag %d, slot %p(%d)\n",
 				hostdata->msgin[2], slot, slot->tag);
 		} else {
-			struct scsi_cmnd *SCp = scsi_find_tag(SDp, SCSI_NO_TAG);
+			struct scsi_cmnd *SCp;
+
+			SCp = scsi_host_find_tag(SDp->host, SCSI_NO_TAG);
 			if(unlikely(SCp == NULL)) {
 				sdev_printk(KERN_ERR, SDp,
 					"no saved request for untagged cmd\n");
@@ -1823,7 +1826,7 @@ NCR_700_queuecommand_lck(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *)
 		       slot->tag, slot);
 	} else {
 		slot->tag = SCSI_NO_TAG;
-		/* must populate current_cmnd for scsi_find_tag to work */
+		/* must populate current_cmnd for scsi_host_find_tag to work */
 		SCp->device->current_cmnd = SCp;
 	}
 	/* sanity check: some of the commands generated by the mid-layer
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index 5c74e4c52..867b864f5 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -2136,7 +2136,7 @@ static unsigned char FPT_SccbMgr_bad_isr(u32 p_port, unsigned char p_card,
  *
  *---------------------------------------------------------------------*/
 
-static void FPT_SccbMgrTableInitAll()
+static void FPT_SccbMgrTableInitAll(void)
 {
 	unsigned char thisCard;
 
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 95f7a76cf..64eed87d3 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -242,13 +242,6 @@ config SCSI_SCAN_ASYNC
 	  system continues booting, and even probe devices on different
 	  busses in parallel, leading to a significant speed-up.
 
-	  If you have built SCSI as modules, enabling this option can
-	  be a problem as the devices may not have been found by the
-	  time your system expects them to have been.  You can load the
-	  scsi_wait_scan module to ensure that all scans have completed.
-	  If you build your SCSI drivers into the kernel, then everything
-	  will work fine if you say Y here.
-
 	  You can override this choice by specifying "scsi_mod.scan=sync"
 	  or async on the kernel's command line.
 
@@ -371,6 +364,7 @@ config SCSI_HPSA
 	tristate "HP Smart Array SCSI driver"
 	depends on PCI && SCSI
 	select CHECK_SIGNATURE
+	select SCSI_SAS_ATTRS
 	help
 	  This driver supports HP Smart Array Controllers (circa 2009).
 	  It is a SCSI alternative to the cciss driver, which is a block
@@ -506,6 +500,7 @@ config SCSI_ADVANSYS
 	tristate "AdvanSys SCSI support"
 	depends on SCSI
 	depends on ISA || EISA || PCI
+	depends on ISA_DMA_API || !ISA
 	help
 	  This is a driver for all SCSI host adapters manufactured by
 	  AdvanSys. It is documented in the kernel source in
@@ -541,7 +536,6 @@ config SCSI_ARCMSR
 
 source "drivers/scsi/esas2r/Kconfig"
 source "drivers/scsi/megaraid/Kconfig.megaraid"
-source "drivers/scsi/mpt2sas/Kconfig"
 source "drivers/scsi/mpt3sas/Kconfig"
 source "drivers/scsi/ufs/Kconfig"
 
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 1a8c9b53f..c14bca4a9 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -106,7 +106,6 @@ obj-$(CONFIG_CXLFLASH)		+= cxlflash/
 obj-$(CONFIG_MEGARAID_LEGACY)	+= megaraid.o
 obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/
 obj-$(CONFIG_MEGARAID_SAS)	+= megaraid/
-obj-$(CONFIG_SCSI_MPT2SAS)	+= mpt2sas/
 obj-$(CONFIG_SCSI_MPT3SAS)	+= mpt3sas/
 obj-$(CONFIG_SCSI_UFSHCD)	+= ufs/
 obj-$(CONFIG_SCSI_ACARD)	+= atp870u.o
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 9b3dd6ef6..e4c243748 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -259,7 +259,7 @@ MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the"
 	" 0=off, 1=on");
 module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(msi, "IRQ handling."
-	" 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)");
+	" 0=PIC(default), 1=MSI, 2=MSI-X)");
 module_param(startup_timeout, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for"
 	" adapter to have it's kernel up and\n"
@@ -570,7 +570,7 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 
 	status = aac_fib_send(ContainerCommand,
 		  cmd_fibcontext,
-		  sizeof (struct aac_get_name),
+		  sizeof(struct aac_get_name_resp),
 		  FsaNormal,
 		  0, 1,
 		  (fib_callback)get_container_name_callback,
@@ -1052,7 +1052,7 @@ static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
 
 	status = aac_fib_send(ContainerCommand,
 		  cmd_fibcontext,
-		  sizeof (struct aac_get_serial),
+		  sizeof(struct aac_get_serial_resp),
 		  FsaNormal,
 		  0, 1,
 		  (fib_callback) get_container_serial_callback,
@@ -2977,11 +2977,16 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		return;
 
 	BUG_ON(fibptr == NULL);
-
 	dev = fibptr->dev;
 
-	srbreply = (struct aac_srb_reply *) fib_data(fibptr);
+	scsi_dma_unmap(scsicmd);
 
+	/* expose physical device if expose_physicald flag is on */
+	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
+	  && expose_physicals > 0)
+		aac_expose_phy_device(scsicmd);
+
+	srbreply = (struct aac_srb_reply *) fib_data(fibptr);
 	scsicmd->sense_buffer[0] = '\0';  /* Initialize sense valid flag to false */
 
 	if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) {
@@ -2994,147 +2999,157 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		 */
 		scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
 				   - le32_to_cpu(srbreply->data_xfer_length));
-	}
-
-	scsi_dma_unmap(scsicmd);
-
-	/* expose physical device if expose_physicald flag is on */
-	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
-	  && expose_physicals > 0)
-		aac_expose_phy_device(scsicmd);
+		/*
+		 * First check the fib status
+		 */
 
-	/*
-	 * First check the fib status
-	 */
+		if (le32_to_cpu(srbreply->status) != ST_OK) {
+			int len;
 
-	if (le32_to_cpu(srbreply->status) != ST_OK){
-		int len;
-		printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
-		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-			    SCSI_SENSE_BUFFERSIZE);
-		scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
-		memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
-	}
+			printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
+			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+				    SCSI_SENSE_BUFFERSIZE);
+			scsicmd->result = DID_ERROR << 16
+						| COMMAND_COMPLETE << 8
+						| SAM_STAT_CHECK_CONDITION;
+			memcpy(scsicmd->sense_buffer,
+					srbreply->sense_data, len);
+		}
 
-	/*
-	 * Next check the srb status
-	 */
-	switch( (le32_to_cpu(srbreply->srb_status))&0x3f){
-	case SRB_STATUS_ERROR_RECOVERY:
-	case SRB_STATUS_PENDING:
-	case SRB_STATUS_SUCCESS:
-		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
-		break;
-	case SRB_STATUS_DATA_OVERRUN:
-		switch(scsicmd->cmnd[0]){
-		case  READ_6:
-		case  WRITE_6:
-		case  READ_10:
-		case  WRITE_10:
-		case  READ_12:
-		case  WRITE_12:
-		case  READ_16:
-		case  WRITE_16:
-			if (le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow) {
-				printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
-			} else {
-				printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+		/*
+		 * Next check the srb status
+		 */
+		switch ((le32_to_cpu(srbreply->srb_status))&0x3f) {
+		case SRB_STATUS_ERROR_RECOVERY:
+		case SRB_STATUS_PENDING:
+		case SRB_STATUS_SUCCESS:
+			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+			break;
+		case SRB_STATUS_DATA_OVERRUN:
+			switch (scsicmd->cmnd[0]) {
+			case  READ_6:
+			case  WRITE_6:
+			case  READ_10:
+			case  WRITE_10:
+			case  READ_12:
+			case  WRITE_12:
+			case  READ_16:
+			case  WRITE_16:
+				if (le32_to_cpu(srbreply->data_xfer_length)
+							< scsicmd->underflow)
+					printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
+				else
+					printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+				scsicmd->result = DID_ERROR << 16
+							| COMMAND_COMPLETE << 8;
+				break;
+			case INQUIRY: {
+				scsicmd->result = DID_OK << 16
+							| COMMAND_COMPLETE << 8;
+				break;
+			}
+			default:
+				scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+				break;
 			}
-			scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
 			break;
-		case INQUIRY: {
-			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+		case SRB_STATUS_ABORTED:
+			scsicmd->result = DID_ABORT << 16 | ABORT << 8;
 			break;
-		}
-		default:
-			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+		case SRB_STATUS_ABORT_FAILED:
+			/*
+			 * Not sure about this one - but assuming the
+			 * hba was trying to abort for some reason
+			 */
+			scsicmd->result = DID_ERROR << 16 | ABORT << 8;
+			break;
+		case SRB_STATUS_PARITY_ERROR:
+			scsicmd->result = DID_PARITY << 16
+						| MSG_PARITY_ERROR << 8;
+			break;
+		case SRB_STATUS_NO_DEVICE:
+		case SRB_STATUS_INVALID_PATH_ID:
+		case SRB_STATUS_INVALID_TARGET_ID:
+		case SRB_STATUS_INVALID_LUN:
+		case SRB_STATUS_SELECTION_TIMEOUT:
+			scsicmd->result = DID_NO_CONNECT << 16
+						| COMMAND_COMPLETE << 8;
 			break;
-		}
-		break;
-	case SRB_STATUS_ABORTED:
-		scsicmd->result = DID_ABORT << 16 | ABORT << 8;
-		break;
-	case SRB_STATUS_ABORT_FAILED:
-		// Not sure about this one - but assuming the hba was trying to abort for some reason
-		scsicmd->result = DID_ERROR << 16 | ABORT << 8;
-		break;
-	case SRB_STATUS_PARITY_ERROR:
-		scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8;
-		break;
-	case SRB_STATUS_NO_DEVICE:
-	case SRB_STATUS_INVALID_PATH_ID:
-	case SRB_STATUS_INVALID_TARGET_ID:
-	case SRB_STATUS_INVALID_LUN:
-	case SRB_STATUS_SELECTION_TIMEOUT:
-		scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
-		break;
 
-	case SRB_STATUS_COMMAND_TIMEOUT:
-	case SRB_STATUS_TIMEOUT:
-		scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_COMMAND_TIMEOUT:
+		case SRB_STATUS_TIMEOUT:
+			scsicmd->result = DID_TIME_OUT << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_BUSY:
-		scsicmd->result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_BUSY:
+			scsicmd->result = DID_BUS_BUSY << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_BUS_RESET:
-		scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_BUS_RESET:
+			scsicmd->result = DID_RESET << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_MESSAGE_REJECTED:
-		scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
-		break;
-	case SRB_STATUS_REQUEST_FLUSHED:
-	case SRB_STATUS_ERROR:
-	case SRB_STATUS_INVALID_REQUEST:
-	case SRB_STATUS_REQUEST_SENSE_FAILED:
-	case SRB_STATUS_NO_HBA:
-	case SRB_STATUS_UNEXPECTED_BUS_FREE:
-	case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
-	case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
-	case SRB_STATUS_DELAYED_RETRY:
-	case SRB_STATUS_BAD_FUNCTION:
-	case SRB_STATUS_NOT_STARTED:
-	case SRB_STATUS_NOT_IN_USE:
-	case SRB_STATUS_FORCE_ABORT:
-	case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
-	default:
+		case SRB_STATUS_MESSAGE_REJECTED:
+			scsicmd->result = DID_ERROR << 16
+						| MESSAGE_REJECT << 8;
+			break;
+		case SRB_STATUS_REQUEST_FLUSHED:
+		case SRB_STATUS_ERROR:
+		case SRB_STATUS_INVALID_REQUEST:
+		case SRB_STATUS_REQUEST_SENSE_FAILED:
+		case SRB_STATUS_NO_HBA:
+		case SRB_STATUS_UNEXPECTED_BUS_FREE:
+		case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
+		case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
+		case SRB_STATUS_DELAYED_RETRY:
+		case SRB_STATUS_BAD_FUNCTION:
+		case SRB_STATUS_NOT_STARTED:
+		case SRB_STATUS_NOT_IN_USE:
+		case SRB_STATUS_FORCE_ABORT:
+		case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
+		default:
 #ifdef AAC_DETAILED_STATUS_INFO
-		printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
-			le32_to_cpu(srbreply->srb_status) & 0x3F,
-			aac_get_status_string(
-				le32_to_cpu(srbreply->srb_status) & 0x3F),
-			scsicmd->cmnd[0],
-			le32_to_cpu(srbreply->scsi_status));
+			printk(KERN_INFO "aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
+				le32_to_cpu(srbreply->srb_status) & 0x3F,
+				aac_get_status_string(
+					le32_to_cpu(srbreply->srb_status) & 0x3F),
+				scsicmd->cmnd[0],
+				le32_to_cpu(srbreply->scsi_status));
 #endif
-		if ((scsicmd->cmnd[0] == ATA_12)
-		  || (scsicmd->cmnd[0] == ATA_16)) {
-			if (scsicmd->cmnd[2] & (0x01 << 5)) {
-				scsicmd->result = DID_OK << 16
-						| COMMAND_COMPLETE << 8;
+			if ((scsicmd->cmnd[0] == ATA_12)
+				|| (scsicmd->cmnd[0] == ATA_16)) {
+					if (scsicmd->cmnd[2] & (0x01 << 5)) {
+						scsicmd->result = DID_OK << 16
+							| COMMAND_COMPLETE << 8;
 				break;
+				} else {
+					scsicmd->result = DID_ERROR << 16
+						| COMMAND_COMPLETE << 8;
+					break;
+				}
 			} else {
 				scsicmd->result = DID_ERROR << 16
-						| COMMAND_COMPLETE << 8;
+					| COMMAND_COMPLETE << 8;
 				break;
 			}
-		} else {
-			scsicmd->result = DID_ERROR << 16
-					| COMMAND_COMPLETE << 8;
-			break;
 		}
-	}
-	if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) {
-		int len;
-		scsicmd->result |= SAM_STAT_CHECK_CONDITION;
-		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-			    SCSI_SENSE_BUFFERSIZE);
+		if (le32_to_cpu(srbreply->scsi_status)
+				== SAM_STAT_CHECK_CONDITION) {
+			int len;
+
+			scsicmd->result |= SAM_STAT_CHECK_CONDITION;
+			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+				    SCSI_SENSE_BUFFERSIZE);
 #ifdef AAC_DETAILED_STATUS_INFO
-		printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
-					le32_to_cpu(srbreply->status), len);
+			printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
+						le32_to_cpu(srbreply->status), len);
 #endif
-		memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
+			memcpy(scsicmd->sense_buffer,
+					srbreply->sense_data, len);
+		}
 	}
 	/*
 	 * OR in the scsi status (already shifted up a bit)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 40fe65c91..074878b55 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -12,7 +12,7 @@
  *              D E F I N E S
  *----------------------------------------------------------------------------*/
 
-#define AAC_MAX_MSIX		8	/* vectors */
+#define AAC_MAX_MSIX		32	/* vectors */
 #define AAC_PCI_MSI_ENABLE	0x8000
 
 enum {
@@ -62,7 +62,7 @@ enum {
 #define	PMC_GLOBAL_INT_BIT0		0x00000001
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 40709
+# define AAC_DRIVER_BUILD 41010
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
@@ -547,6 +547,7 @@ struct adapter_ops
 	int  (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
 	int  (*adapter_check_health)(struct aac_dev *dev);
 	int  (*adapter_restart)(struct aac_dev *dev, int bled);
+	void (*adapter_start)(struct aac_dev *dev);
 	/* Transport operations */
 	int  (*adapter_ioremap)(struct aac_dev * dev, u32 size);
 	irq_handler_t adapter_intr;
@@ -843,6 +844,10 @@ struct src_registers {
 						&((AEP)->regs.src.bar0->CSR))
 #define src_writel(AEP, CSR, value)	writel(value, \
 						&((AEP)->regs.src.bar0->CSR))
+#if defined(writeq)
+#define	src_writeq(AEP, CSR, value)	writeq(value, \
+						&((AEP)->regs.src.bar0->CSR))
+#endif
 
 #define SRC_ODR_SHIFT		12
 #define SRC_IDR_SHIFT		9
@@ -1162,6 +1167,11 @@ struct aac_dev
 	struct fsa_dev_info	*fsa_dev;
 	struct task_struct	*thread;
 	int			cardtype;
+	/*
+	 *This lock will protect the two 32-bit
+	 *writes to the Inbound Queue
+	 */
+	spinlock_t		iq_lock;
 
 	/*
 	 *	The following is the device specific extension.
@@ -1247,6 +1257,9 @@ struct aac_dev
 #define aac_adapter_restart(dev,bled) \
 	(dev)->a_ops.adapter_restart(dev,bled)
 
+#define aac_adapter_start(dev) \
+	((dev)->a_ops.adapter_start(dev))
+
 #define aac_adapter_ioremap(dev, size) \
 	(dev)->a_ops.adapter_ioremap(dev, size)
 
@@ -2097,6 +2110,8 @@ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
 #define AAC_OWNER_ERROR_HANDLER	0x103
 #define AAC_OWNER_FIRMWARE	0x106
 
+int aac_acquire_irq(struct aac_dev *dev);
+void aac_free_irq(struct aac_dev *dev);
 const char *aac_driverinfo(struct Scsi_Host *);
 struct fib *aac_fib_alloc(struct aac_dev *dev);
 int aac_fib_setup(struct aac_dev *dev);
@@ -2127,6 +2142,7 @@ int aac_sa_init(struct aac_dev *dev);
 int aac_src_init(struct aac_dev *dev);
 int aac_srcv_init(struct aac_dev *dev);
 int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
+void aac_define_int_mode(struct aac_dev *dev);
 unsigned int aac_response_normal(struct aac_queue * q);
 unsigned int aac_command_normal(struct aac_queue * q);
 unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index,
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 45db84ad3..0e954e37f 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -43,8 +43,6 @@
 
 #include "aacraid.h"
 
-static void aac_define_int_mode(struct aac_dev *dev);
-
 struct aac_common aac_config = {
 	.irq_mod = 1
 };
@@ -338,6 +336,74 @@ static int aac_comm_init(struct aac_dev * dev)
 	return 0;
 }
 
+void aac_define_int_mode(struct aac_dev *dev)
+{
+	int i, msi_count, min_msix;
+
+	msi_count = i = 0;
+	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
+	if (dev->max_msix == 0 ||
+	    dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->sync_mode) {
+		dev->max_msix = 1;
+		dev->vector_cap =
+			dev->scsi_host_ptr->can_queue +
+			AAC_NUM_MGT_FIB;
+		return;
+	}
+
+	/* Don't bother allocating more MSI-X vectors than cpus */
+	msi_count = min(dev->max_msix,
+		(unsigned int)num_online_cpus());
+
+	dev->max_msix = msi_count;
+
+	if (msi_count > AAC_MAX_MSIX)
+		msi_count = AAC_MAX_MSIX;
+
+	for (i = 0; i < msi_count; i++)
+		dev->msixentry[i].entry = i;
+
+	if (msi_count > 1 &&
+	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
+		min_msix = 2;
+		i = pci_enable_msix_range(dev->pdev,
+				    dev->msixentry,
+				    min_msix,
+				    msi_count);
+		if (i > 0) {
+			dev->msi_enabled = 1;
+			msi_count = i;
+		} else {
+			dev->msi_enabled = 0;
+			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled) {
+		msi_count = 1;
+		i = pci_enable_msi(dev->pdev);
+
+		if (!i) {
+			dev->msi_enabled = 1;
+			dev->msi = 1;
+		} else {
+			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled)
+		dev->max_msix = msi_count = 1;
+	else {
+		if (dev->max_msix > msi_count)
+			dev->max_msix = msi_count;
+	}
+	dev->vector_cap =
+		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
+		msi_count;
+}
 struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 {
 	u32 status[5];
@@ -350,6 +416,7 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	dev->management_fib_count = 0;
 	spin_lock_init(&dev->manage_lock);
 	spin_lock_init(&dev->sync_lock);
+	spin_lock_init(&dev->iq_lock);
 	dev->max_fib_size = sizeof(struct hw_fib);
 	dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
 		- sizeof(struct aac_fibhdr)
@@ -508,79 +575,3 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	return dev;
 }
 
-static void aac_define_int_mode(struct aac_dev *dev)
-{
-
-	int i, msi_count;
-
-	msi_count = i = 0;
-	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
-	if (dev->max_msix == 0 ||
-	    dev->pdev->device == PMC_DEVICE_S6 ||
-	    dev->sync_mode) {
-		dev->max_msix = 1;
-		dev->vector_cap =
-			dev->scsi_host_ptr->can_queue +
-			AAC_NUM_MGT_FIB;
-		return;
-	}
-
-	msi_count = min(dev->max_msix,
-		(unsigned int)num_online_cpus());
-
-	dev->max_msix = msi_count;
-
-	if (msi_count > AAC_MAX_MSIX)
-		msi_count = AAC_MAX_MSIX;
-
-	for (i = 0; i < msi_count; i++)
-		dev->msixentry[i].entry = i;
-
-	if (msi_count > 1 &&
-	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
-		i = pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count);
-		 /* Check how many MSIX vectors are allocated */
-		if (i >= 0) {
-			dev->msi_enabled = 1;
-			if (i) {
-				msi_count = i;
-				if (pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count)) {
-					dev->msi_enabled = 0;
-					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-							dev->name, dev->id, i);
-				}
-			}
-		} else {
-			dev->msi_enabled = 0;
-			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled) {
-		msi_count = 1;
-		i = pci_enable_msi(dev->pdev);
-
-		if (!i) {
-			dev->msi_enabled = 1;
-			dev->msi = 1;
-		} else {
-			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled)
-		dev->max_msix = msi_count = 1;
-	else {
-		if (dev->max_msix > msi_count)
-			dev->max_msix = msi_count;
-	}
-	dev->vector_cap =
-		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
-		msi_count;
-}
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 4da574925..a1f90fe84 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1270,13 +1270,12 @@ retry_next:
 static int _aac_reset_adapter(struct aac_dev *aac, int forced)
 {
 	int index, quirks;
-	int retval, i;
+	int retval;
 	struct Scsi_Host *host;
 	struct scsi_device *dev;
 	struct scsi_cmnd *command;
 	struct scsi_cmnd *command_list;
 	int jafo = 0;
-	int cpu;
 
 	/*
 	 * Assumptions:
@@ -1339,35 +1338,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced)
 	aac->comm_phys = 0;
 	kfree(aac->queues);
 	aac->queues = NULL;
-	cpu = cpumask_first(cpu_online_mask);
-	if (aac->pdev->device == PMC_DEVICE_S6 ||
-	    aac->pdev->device == PMC_DEVICE_S7 ||
-	    aac->pdev->device == PMC_DEVICE_S8 ||
-	    aac->pdev->device == PMC_DEVICE_S9) {
-		if (aac->max_msix > 1) {
-			for (i = 0; i < aac->max_msix; i++) {
-				if (irq_set_affinity_hint(
-				    aac->msixentry[i].vector,
-				    NULL)) {
-					printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
-						aac->name,
-						aac->id,
-						cpu);
-				}
-				cpu = cpumask_next(cpu,
-						cpu_online_mask);
-				free_irq(aac->msixentry[i].vector,
-					 &(aac->aac_msix[i]));
-			}
-			pci_disable_msix(aac->pdev);
-		} else {
-			free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
-		}
-	} else {
-		free_irq(aac->pdev->irq, aac);
-	}
-	if (aac->msi)
-		pci_disable_msi(aac->pdev);
+	aac_free_irq(aac);
 	kfree(aac->fsa_dev);
 	aac->fsa_dev = NULL;
 	quirks = aac_get_driver_ident(index)->quirks;
@@ -1978,3 +1949,83 @@ int aac_command_thread(void *data)
 	dev->aif_thread = 0;
 	return 0;
 }
+
+int aac_acquire_irq(struct aac_dev *dev)
+{
+	int i;
+	int j;
+	int ret = 0;
+	int cpu;
+
+	cpu = cpumask_first(cpu_online_mask);
+	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+		for (i = 0; i < dev->max_msix; i++) {
+			dev->aac_msix[i].vector_no = i;
+			dev->aac_msix[i].dev = dev;
+			if (request_irq(dev->msixentry[i].vector,
+					dev->a_ops.adapter_intr,
+					0, "aacraid", &(dev->aac_msix[i]))) {
+				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+						dev->name, dev->id, i);
+				for (j = 0 ; j < i ; j++)
+					free_irq(dev->msixentry[j].vector,
+						 &(dev->aac_msix[j]));
+				pci_disable_msix(dev->pdev);
+				ret = -1;
+			}
+			if (irq_set_affinity_hint(dev->msixentry[i].vector,
+							get_cpu_mask(cpu))) {
+				printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
+					    dev->name, dev->id, cpu);
+			}
+			cpu = cpumask_next(cpu, cpu_online_mask);
+		}
+	} else {
+		dev->aac_msix[0].vector_no = 0;
+		dev->aac_msix[0].dev = dev;
+
+		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid",
+			&(dev->aac_msix[0])) < 0) {
+			if (dev->msi)
+				pci_disable_msi(dev->pdev);
+			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+					dev->name, dev->id);
+			ret = -1;
+		}
+	}
+	return ret;
+}
+
+void aac_free_irq(struct aac_dev *dev)
+{
+	int i;
+	int cpu;
+
+	cpu = cpumask_first(cpu_online_mask);
+	if (dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->pdev->device == PMC_DEVICE_S7 ||
+	    dev->pdev->device == PMC_DEVICE_S8 ||
+	    dev->pdev->device == PMC_DEVICE_S9) {
+		if (dev->max_msix > 1) {
+			for (i = 0; i < dev->max_msix; i++) {
+				if (irq_set_affinity_hint(
+					dev->msixentry[i].vector, NULL)) {
+					printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
+					    dev->name, dev->id, cpu);
+				}
+				cpu = cpumask_next(cpu, cpu_online_mask);
+				free_irq(dev->msixentry[i].vector,
+						&(dev->aac_msix[i]));
+			}
+		} else {
+			free_irq(dev->pdev->irq, &(dev->aac_msix[0]));
+		}
+	} else {
+		free_irq(dev->pdev->irq, dev);
+	}
+	if (dev->msi)
+		pci_disable_msi(dev->pdev);
+	else if (dev->max_msix > 1)
+		pci_disable_msix(dev->pdev);
+}
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 9eec02733..3b6e5c67e 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1317,6 +1317,154 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	return error;
 }
 
+#if (defined(CONFIG_PM))
+void aac_release_resources(struct aac_dev *aac)
+{
+	int i;
+
+	aac_adapter_disable_int(aac);
+	if (aac->pdev->device == PMC_DEVICE_S6 ||
+	    aac->pdev->device == PMC_DEVICE_S7 ||
+	    aac->pdev->device == PMC_DEVICE_S8 ||
+	    aac->pdev->device == PMC_DEVICE_S9) {
+		if (aac->max_msix > 1) {
+			for (i = 0; i < aac->max_msix; i++)
+				free_irq(aac->msixentry[i].vector,
+					&(aac->aac_msix[i]));
+		} else {
+			free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
+		}
+	} else {
+		free_irq(aac->pdev->irq, aac);
+	}
+	if (aac->msi)
+		pci_disable_msi(aac->pdev);
+	else if (aac->max_msix > 1)
+		pci_disable_msix(aac->pdev);
+
+}
+
+static int aac_acquire_resources(struct aac_dev *dev)
+{
+	int i, j;
+	int instance = dev->id;
+	const char *name = dev->name;
+	unsigned long status;
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that we
+	 *	can handle.
+	 */
+	while (!((status = src_readl(dev, MUnit.OMR)) & KERNEL_UP_AND_RUNNING)
+		|| status == 0xffffffff)
+			msleep(20);
+
+	aac_adapter_disable_int(dev);
+	aac_adapter_enable_int(dev);
+
+
+	if ((dev->pdev->device == PMC_DEVICE_S7 ||
+	     dev->pdev->device == PMC_DEVICE_S8 ||
+	     dev->pdev->device == PMC_DEVICE_S9))
+		aac_define_int_mode(dev);
+
+	if (dev->msi_enabled)
+		aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
+
+	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+		for (i = 0; i < dev->max_msix; i++) {
+			dev->aac_msix[i].vector_no = i;
+			dev->aac_msix[i].dev = dev;
+
+			if (request_irq(dev->msixentry[i].vector,
+					dev->a_ops.adapter_intr,
+					0, "aacraid", &(dev->aac_msix[i]))) {
+				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+						name, instance, i);
+				for (j = 0 ; j < i ; j++)
+					free_irq(dev->msixentry[j].vector,
+						 &(dev->aac_msix[j]));
+				pci_disable_msix(dev->pdev);
+				goto error_iounmap;
+			}
+		}
+	} else {
+		dev->aac_msix[0].vector_no = 0;
+		dev->aac_msix[0].dev = dev;
+
+		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid",
+			&(dev->aac_msix[0])) < 0) {
+			if (dev->msi)
+				pci_disable_msi(dev->pdev);
+			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+					name, instance);
+			goto error_iounmap;
+		}
+	}
+
+	aac_adapter_enable_int(dev);
+
+	if (!dev->sync_mode)
+		aac_adapter_start(dev);
+	return 0;
+
+error_iounmap:
+	return -1;
+
+}
+static int aac_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+	scsi_block_requests(shost);
+	aac_send_shutdown(aac);
+
+	aac_release_resources(aac);
+
+	pci_set_drvdata(pdev, shost);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int aac_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+	int r;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_enable_wake(pdev, PCI_D0, 0);
+	pci_restore_state(pdev);
+	r = pci_enable_device(pdev);
+
+	if (r)
+		goto fail_device;
+
+	pci_set_master(pdev);
+	if (aac_acquire_resources(aac))
+		goto fail_device;
+	/*
+	* reset this flag to unblock ioctl() as it was set at
+	* aac_send_shutdown() to block ioctls from upperlayer
+	*/
+	aac->adapter_shutdown = 0;
+	scsi_unblock_requests(shost);
+
+	return 0;
+
+fail_device:
+	printk(KERN_INFO "%s%d: resume failed.\n", aac->name, aac->id);
+	scsi_host_put(shost);
+	pci_disable_device(pdev);
+	return -ENODEV;
+}
+#endif
+
 static void aac_shutdown(struct pci_dev *dev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(dev);
@@ -1356,6 +1504,10 @@ static struct pci_driver aac_pci_driver = {
 	.id_table	= aac_pci_tbl,
 	.probe		= aac_probe_one,
 	.remove		= aac_remove_one,
+#if (defined(CONFIG_PM))
+	.suspend	= aac_suspend,
+	.resume		= aac_resume,
+#endif
 	.shutdown	= aac_shutdown,
 };
 
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index 9570612b8..ac1638069 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -623,6 +623,7 @@ int _aac_rx_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_rx_check_health;
 	dev->a_ops.adapter_restart = aac_rx_restart_adapter;
+	dev->a_ops.adapter_start = aac_rx_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
index e66477c98..869aea23c 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -372,6 +372,7 @@ int aac_sa_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = sa_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_sa_check_health;
 	dev->a_ops.adapter_restart = aac_sa_restart_adapter;
+	dev->a_ops.adapter_start = aac_sa_start_adapter;
 	dev->a_ops.adapter_intr = aac_sa_intr;
 	dev->a_ops.adapter_deliver = aac_rx_deliver_producer;
 	dev->a_ops.adapter_ioremap = aac_sa_ioremap;
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index e63cf9f22..2aa34ea8c 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -447,6 +447,10 @@ static int aac_src_deliver_message(struct fib *fib)
 	u32 fibsize;
 	dma_addr_t address;
 	struct aac_fib_xporthdr *pFibX;
+#if !defined(writeq)
+	unsigned long flags;
+#endif
+
 	u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
 
 	atomic_inc(&q->numpending);
@@ -511,10 +515,14 @@ static int aac_src_deliver_message(struct fib *fib)
 			return -EINVAL;
 		address |= fibsize;
 	}
-
+#if defined(writeq)
+	src_writeq(dev, MUnit.IQ_L, (u64)address);
+#else
+	spin_lock_irqsave(&fib->dev->iq_lock, flags);
 	src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff);
 	src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
-
+	spin_unlock_irqrestore(&fib->dev->iq_lock, flags);
+#endif
 	return 0;
 }
 
@@ -726,6 +734,7 @@ int aac_src_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_src_check_health;
 	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
@@ -741,7 +750,7 @@ int aac_src_init(struct aac_dev *dev)
 	if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
 		goto error_iounmap;
 
-	dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
+	dev->msi = !pci_enable_msi(dev->pdev);
 
 	dev->aac_msix[0].vector_no = 0;
 	dev->aac_msix[0].dev = dev;
@@ -789,9 +798,7 @@ int aac_srcv_init(struct aac_dev *dev)
 	unsigned long status;
 	int restart = 0;
 	int instance = dev->id;
-	int i, j;
 	const char *name = dev->name;
-	int cpu;
 
 	dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
 	dev->a_ops.adapter_comm = aac_src_select_comm;
@@ -892,6 +899,7 @@ int aac_srcv_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_src_check_health;
 	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
@@ -908,48 +916,10 @@ int aac_srcv_init(struct aac_dev *dev)
 		goto error_iounmap;
 	if (dev->msi_enabled)
 		aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
-	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
-		cpu = cpumask_first(cpu_online_mask);
-		for (i = 0; i < dev->max_msix; i++) {
-			dev->aac_msix[i].vector_no = i;
-			dev->aac_msix[i].dev = dev;
-
-			if (request_irq(dev->msixentry[i].vector,
-					dev->a_ops.adapter_intr,
-					0,
-					"aacraid",
-					&(dev->aac_msix[i]))) {
-				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
-						name, instance, i);
-				for (j = 0 ; j < i ; j++)
-					free_irq(dev->msixentry[j].vector,
-						 &(dev->aac_msix[j]));
-				pci_disable_msix(dev->pdev);
-				goto error_iounmap;
-			}
-			if (irq_set_affinity_hint(
-			   dev->msixentry[i].vector,
-			   get_cpu_mask(cpu))) {
-				printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
-						name, instance, cpu);
-			}
-			cpu = cpumask_next(cpu, cpu_online_mask);
-		}
-	} else {
-		dev->aac_msix[0].vector_no = 0;
-		dev->aac_msix[0].dev = dev;
-
-		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
-				IRQF_SHARED,
-				"aacraid",
-				&(dev->aac_msix[0])) < 0) {
-			if (dev->msi)
-				pci_disable_msi(dev->pdev);
-			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
-					name, instance);
-			goto error_iounmap;
-		}
-	}
+
+	if (aac_acquire_irq(dev))
+		goto error_iounmap;
+
 	dev->dbg_base = dev->base_start;
 	dev->dbg_base_mapped = dev->base;
 	dev->dbg_size = dev->base_size;
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 0c67a3124..5f01b0aa7 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -7803,7 +7803,7 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
 		return ASC_BUSY;
 	}
 	scsiqp->sense_addr = cpu_to_le32(sense_addr);
-	scsiqp->sense_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE);
+	scsiqp->sense_len = SCSI_SENSE_BUFFERSIZE;
 
 	/* Build ADV_SCSI_REQ_Q */
 
@@ -10819,7 +10819,6 @@ static struct scsi_host_template advansys_template = {
 	 * by enabling clustering, I/O throughput increases as well.
 	 */
 	.use_clustering = ENABLE_CLUSTERING,
-	.use_blk_tags = 1,
 };
 
 static int advansys_wide_init_chip(struct Scsi_Host *shost)
@@ -11211,11 +11210,6 @@ static int advansys_board_found(struct Scsi_Host *shost, unsigned int iop,
 		/* Set maximum number of queues the adapter can handle. */
 		shost->can_queue = adv_dvc_varp->max_host_qng;
 	}
-	ret = scsi_init_shared_tag_map(shost, shost->can_queue);
-	if (ret) {
-		shost_printk(KERN_ERR, shost, "init tag map failed\n");
-		goto err_free_dma;
-	}
 
 	/*
 	 * Set the maximum number of scatter-gather elements the
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index ce96a0be3..2588b8f84 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -925,7 +925,6 @@ struct scsi_host_template aic79xx_driver_template = {
 	.slave_configure	= ahd_linux_slave_configure,
 	.target_alloc		= ahd_linux_target_alloc,
 	.target_destroy		= ahd_linux_target_destroy,
-	.use_blk_tags		= 1,
 };
 
 /******************************** Bus DMA *************************************/
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index a2f2c774c..b846a4683 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -812,7 +812,6 @@ struct scsi_host_template aic7xxx_driver_template = {
 	.slave_configure	= ahc_linux_slave_configure,
 	.target_alloc		= ahc_linux_target_alloc,
 	.target_destroy		= ahc_linux_target_destroy,
-	.use_blk_tags		= 1,
 };
 
 /**************************** Tasklet Handler *********************************/
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index f6c336b05..662b2321d 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -73,7 +73,6 @@ static struct scsi_host_template aic94xx_sht = {
 	.eh_bus_reset_handler	= sas_eh_bus_reset_handler,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
-	.use_blk_tags		= 1,
 	.track_queue_depth	= 1,
 };
 
@@ -704,10 +703,10 @@ static int asd_unregister_sas_ha(struct asd_ha_struct *asd_ha)
 {
 	int err;
 
+	scsi_remove_host(asd_ha->sas_ha.core.shost);
 	err = sas_unregister_ha(&asd_ha->sas_ha);
 
 	sas_remove_host(asd_ha->sas_ha.core.shost);
-	scsi_remove_host(asd_ha->sas_ha.core.shost);
 	scsi_host_put(asd_ha->sas_ha.core.shost);
 
 	kfree(asd_ha->sas_ha.sas_phy);
diff --git a/drivers/scsi/be2iscsi/Kconfig b/drivers/scsi/be2iscsi/Kconfig
index ceaca32e7..4e7cad272 100644
--- a/drivers/scsi/be2iscsi/Kconfig
+++ b/drivers/scsi/be2iscsi/Kconfig
@@ -1,9 +1,9 @@
 config BE2ISCSI
-	tristate "ServerEngines' 10Gbps iSCSI - BladeEngine 2"
+	tristate "Emulex 10Gbps iSCSI - BladeEngine 2"
 	depends on PCI && SCSI && NET
 	select SCSI_ISCSI_ATTRS
 	select ISCSI_BOOT_SYSFS
 
 	help
-	This driver implements the iSCSI functionality for ServerEngines'
+	This driver implements the iSCSI functionality for Emulex
 	10Gbps Storage adapter - BladeEngine 2.
diff --git a/drivers/scsi/be2iscsi/Makefile b/drivers/scsi/be2iscsi/Makefile
index c11f443e3..d0488eaaf 100644
--- a/drivers/scsi/be2iscsi/Makefile
+++ b/drivers/scsi/be2iscsi/Makefile
@@ -1,5 +1,5 @@
 #
-# Makefile to build the iSCSI driver for ServerEngine's BladeEngine.
+# Makefile to build the iSCSI driver for Emulex OneConnect.
 #
 #
 
diff --git a/drivers/scsi/be2iscsi/be.h b/drivers/scsi/be2iscsi/be.h
index 32070099c..77f992e74 100644
--- a/drivers/scsi/be2iscsi/be.h
+++ b/drivers/scsi/be2iscsi/be.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2015 Avago Technologies
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -10,7 +10,7 @@
  * Contact Information:
  * linux-drivers@avagotech.com
  *
- * Avago Technologies
+ * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
  */
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index 185391a64..2778089b0 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2015 Avago Technologies
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -10,7 +10,7 @@
  * Contact Information:
  * linux-drivers@avagotech.com
  *
- * Avago Technologies
+ * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
  */
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index cdfbc5c19..4bfca355f 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2015 Avago Technologies
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -10,7 +10,7 @@
  * Contact Information:
  * linux-drivers@avagotech.com
  *
- * Avago Technologies
+ * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
  */
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 2f0700796..b7087ba69 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2015 Avago Technologies
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -12,7 +12,7 @@
  * Contact Information:
  * linux-drivers@avagotech.com
  *
- * Avago Technologies
+ * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
  */
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 7a6dbfbcc..fe0c5143f 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2015 Avago Technologies
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -12,7 +12,7 @@
  * Contact Information:
  * linux-drivers@avagotech.com
  *
- * Avago Technologies
+ * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
  */
@@ -50,7 +50,7 @@ static unsigned int enable_msix = 1;
 
 MODULE_DESCRIPTION(DRV_DESC " " BUILD_STR);
 MODULE_VERSION(BUILD_STR);
-MODULE_AUTHOR("Avago Technologies");
+MODULE_AUTHOR("Emulex Corporation");
 MODULE_LICENSE("GPL");
 module_param(be_iopoll_budget, int, 0);
 module_param(enable_msix, int, 0);
@@ -552,7 +552,7 @@ MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
 
 static struct scsi_host_template beiscsi_sht = {
 	.module = THIS_MODULE,
-	.name = "Avago Technologies 10Gbe open-iscsi Initiator Driver",
+	.name = "Emulex 10Gbe open-iscsi Initiator Driver",
 	.proc_name = DRV_NAME,
 	.queuecommand = iscsi_queuecommand,
 	.change_queue_depth = scsi_change_queue_depth,
@@ -1198,14 +1198,16 @@ free_io_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle)
  * alloc_wrb_handle - To allocate a wrb handle
  * @phba: The hba pointer
  * @cid: The cid to use for allocation
+ * @pwrb_context: ptr to ptr to wrb context
  *
  * This happens under session_lock until submission to chip
  */
-struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid)
+struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid,
+				     struct hwi_wrb_context **pcontext)
 {
 	struct hwi_wrb_context *pwrb_context;
 	struct hwi_controller *phwi_ctrlr;
-	struct wrb_handle *pwrb_handle, *pwrb_handle_tmp;
+	struct wrb_handle *pwrb_handle;
 	uint16_t cri_index = BE_GET_CRI_FROM_CID(cid);
 
 	phwi_ctrlr = phba->phwi_ctrlr;
@@ -1219,9 +1221,9 @@ struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid)
 			pwrb_context->alloc_index = 0;
 		else
 			pwrb_context->alloc_index++;
-		pwrb_handle_tmp = pwrb_context->pwrb_handle_base[
-						pwrb_context->alloc_index];
-		pwrb_handle->nxt_wrb_index = pwrb_handle_tmp->wrb_index;
+
+		/* Return the context address */
+		*pcontext = pwrb_context;
 	} else
 		pwrb_handle = NULL;
 	return pwrb_handle;
@@ -3184,7 +3186,7 @@ be_sgl_create_contiguous(void *virtual_address,
 {
 	WARN_ON(!virtual_address);
 	WARN_ON(!physical_address);
-	WARN_ON(!length > 0);
+	WARN_ON(!length);
 	WARN_ON(!sgl);
 
 	sgl->va = virtual_address;
@@ -4678,6 +4680,7 @@ beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn,
 			   struct beiscsi_offload_params *params)
 {
 	struct wrb_handle *pwrb_handle;
+	struct hwi_wrb_context *pwrb_context = NULL;
 	struct beiscsi_hba *phba = beiscsi_conn->phba;
 	struct iscsi_task *task = beiscsi_conn->task;
 	struct iscsi_session *session = task->conn->session;
@@ -4692,14 +4695,17 @@ beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn,
 	beiscsi_cleanup_task(task);
 	spin_unlock_bh(&session->back_lock);
 
-	pwrb_handle = alloc_wrb_handle(phba, beiscsi_conn->beiscsi_conn_cid);
+	pwrb_handle = alloc_wrb_handle(phba, beiscsi_conn->beiscsi_conn_cid,
+				       &pwrb_context);
 
 	/* Check for the adapter family */
 	if (is_chip_be2_be3r(phba))
 		beiscsi_offload_cxn_v0(params, pwrb_handle,
-				       phba->init_mem);
+				       phba->init_mem,
+				       pwrb_context);
 	else
-		beiscsi_offload_cxn_v2(params, pwrb_handle);
+		beiscsi_offload_cxn_v2(params, pwrb_handle,
+				       pwrb_context);
 
 	be_dws_le_to_cpu(pwrb_handle->pwrb,
 			 sizeof(struct iscsi_target_context_update_wrb));
@@ -4769,7 +4775,8 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 			goto free_hndls;
 		}
 		io_task->pwrb_handle = alloc_wrb_handle(phba,
-					beiscsi_conn->beiscsi_conn_cid);
+					beiscsi_conn->beiscsi_conn_cid,
+					&io_task->pwrb_context);
 		if (!io_task->pwrb_handle) {
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
@@ -4803,7 +4810,8 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 							io_task->psgl_handle;
 				io_task->pwrb_handle =
 					alloc_wrb_handle(phba,
-					beiscsi_conn->beiscsi_conn_cid);
+					beiscsi_conn->beiscsi_conn_cid,
+					&io_task->pwrb_context);
 				if (!io_task->pwrb_handle) {
 					beiscsi_log(phba, KERN_ERR,
 						    BEISCSI_LOG_IO |
@@ -4839,7 +4847,8 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 			}
 			io_task->pwrb_handle =
 					alloc_wrb_handle(phba,
-					beiscsi_conn->beiscsi_conn_cid);
+					beiscsi_conn->beiscsi_conn_cid,
+					&io_task->pwrb_context);
 			if (!io_task->pwrb_handle) {
 				beiscsi_log(phba, KERN_ERR,
 					    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
@@ -4925,7 +4934,12 @@ int beiscsi_iotask_v2(struct iscsi_task *task, struct scatterlist *sg,
 
 	hwi_write_sgl_v2(pwrb, sg, num_sg, io_task);
 	AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb, pwrb,
-		      io_task->pwrb_handle->nxt_wrb_index);
+		      io_task->pwrb_handle->wrb_index);
+	if (io_task->pwrb_context->plast_wrb)
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb,
+			      io_task->pwrb_context->plast_wrb,
+			      io_task->pwrb_handle->wrb_index);
+	io_task->pwrb_context->plast_wrb = pwrb;
 
 	be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
 
@@ -4982,7 +4996,13 @@ static int beiscsi_iotask(struct iscsi_task *task, struct scatterlist *sg,
 	hwi_write_sgl(pwrb, sg, num_sg, io_task);
 
 	AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb,
-		      io_task->pwrb_handle->nxt_wrb_index);
+		      io_task->pwrb_handle->wrb_index);
+	if (io_task->pwrb_context->plast_wrb)
+		AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb,
+			      io_task->pwrb_context->plast_wrb,
+			      io_task->pwrb_handle->wrb_index);
+	io_task->pwrb_context->plast_wrb = pwrb;
+
 	be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
 
 	doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
@@ -5020,7 +5040,13 @@ static int beiscsi_mtask(struct iscsi_task *task)
 		AMAP_SET_BITS(struct amap_iscsi_wrb, r2t_exp_dtl, pwrb,
 			      task->data_count);
 		AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb,
-			      io_task->pwrb_handle->nxt_wrb_index);
+			      io_task->pwrb_handle->wrb_index);
+		if (io_task->pwrb_context->plast_wrb)
+			AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb,
+				      io_task->pwrb_context->plast_wrb,
+				      io_task->pwrb_handle->wrb_index);
+		io_task->pwrb_context->plast_wrb = pwrb;
+
 		pwrb_typeoffset = BE_WRB_TYPE_OFFSET;
 	} else {
 		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, cmdsn_itt, pwrb,
@@ -5032,7 +5058,13 @@ static int beiscsi_mtask(struct iscsi_task *task)
 		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, r2t_exp_dtl, pwrb,
 			      task->data_count);
 		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb, pwrb,
-			      io_task->pwrb_handle->nxt_wrb_index);
+			      io_task->pwrb_handle->wrb_index);
+		if (io_task->pwrb_context->plast_wrb)
+			AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb,
+				      io_task->pwrb_context->plast_wrb,
+				      io_task->pwrb_handle->wrb_index);
+		io_task->pwrb_context->plast_wrb = pwrb;
+
 		pwrb_typeoffset = SKH_WRB_TYPE_OFFSET;
 	}
 
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index b8c0c7819..5c67c0732 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2015 Avago Technologies
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -12,7 +12,7 @@
  * Contact Information:
  * linux-drivers@avagotech.com
  *
- * Avago Technologies
+ * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
  */
@@ -36,8 +36,8 @@
 #include <scsi/scsi_transport_iscsi.h>
 
 #define DRV_NAME		"be2iscsi"
-#define BUILD_STR		"10.6.0.0"
-#define BE_NAME			"Avago Technologies OneConnect" \
+#define BUILD_STR		"10.6.0.1"
+#define BE_NAME			"Emulex OneConnect" \
 				"Open-iSCSI Driver version" BUILD_STR
 #define DRV_DESC		BE_NAME " " "Driver"
 
@@ -502,6 +502,7 @@ struct beiscsi_io_task {
 	struct sgl_handle *psgl_handle;
 	struct beiscsi_conn *conn;
 	struct scsi_cmnd *scsi_cmnd;
+	struct hwi_wrb_context *pwrb_context;
 	unsigned int cmd_sn;
 	unsigned int flags;
 	unsigned short cid;
@@ -833,7 +834,8 @@ struct amap_iscsi_wrb_v2 {
 } __packed;
 
 
-struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid);
+struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid,
+				     struct hwi_wrb_context **pcontext);
 void
 free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle);
 
@@ -1044,7 +1046,6 @@ enum hwh_type_enum {
 struct wrb_handle {
 	enum hwh_type_enum type;
 	unsigned short wrb_index;
-	unsigned short nxt_wrb_index;
 
 	struct iscsi_task *pio_handle;
 	struct iscsi_wrb *pwrb;
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index ca4016f20..aea3e6b94 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2015 Avago Technologies
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -12,7 +12,7 @@
  * Contact Information:
  * linux-drivers@avagotech.com
  *
- * Avago Technologies
+ * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
  */
@@ -1573,7 +1573,8 @@ beiscsi_phys_port_disp(struct device *dev, struct device_attribute *attr,
 
 void beiscsi_offload_cxn_v0(struct beiscsi_offload_params *params,
 			     struct wrb_handle *pwrb_handle,
-			     struct be_mem_descriptor *mem_descr)
+			     struct be_mem_descriptor *mem_descr,
+			     struct hwi_wrb_context *pwrb_context)
 {
 	struct iscsi_wrb *pwrb = pwrb_handle->pwrb;
 
@@ -1617,7 +1618,14 @@ void beiscsi_offload_cxn_v0(struct beiscsi_offload_params *params,
 		      max_burst_length) / 32]);
 
 	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ptr2nextwrb,
-		      pwrb, pwrb_handle->nxt_wrb_index);
+		      pwrb, pwrb_handle->wrb_index);
+	if (pwrb_context->plast_wrb)
+		AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+			      ptr2nextwrb,
+			      pwrb_context->plast_wrb,
+			      pwrb_handle->wrb_index);
+	pwrb_context->plast_wrb = pwrb;
+
 	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
 		      session_state, pwrb, 0);
 	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, compltonack,
@@ -1637,7 +1645,8 @@ void beiscsi_offload_cxn_v0(struct beiscsi_offload_params *params,
 }
 
 void beiscsi_offload_cxn_v2(struct beiscsi_offload_params *params,
-			     struct wrb_handle *pwrb_handle)
+			     struct wrb_handle *pwrb_handle,
+			     struct hwi_wrb_context *pwrb_context)
 {
 	struct iscsi_wrb *pwrb = pwrb_handle->pwrb;
 
@@ -1652,7 +1661,14 @@ void beiscsi_offload_cxn_v2(struct beiscsi_offload_params *params,
 		      BE_TGT_CTX_UPDT_CMD);
 	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
 		      ptr2nextwrb,
-		      pwrb, pwrb_handle->nxt_wrb_index);
+		      pwrb, pwrb_handle->wrb_index);
+	if (pwrb_context->plast_wrb)
+		AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+			      ptr2nextwrb,
+			      pwrb_context->plast_wrb,
+			      pwrb_handle->wrb_index);
+	pwrb_context->plast_wrb = pwrb;
+
 	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, wrb_idx,
 		      pwrb, pwrb_handle->wrb_index);
 	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
diff --git a/drivers/scsi/be2iscsi/be_mgmt.h b/drivers/scsi/be2iscsi/be_mgmt.h
index b58a7decb..c1dbb690e 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.h
+++ b/drivers/scsi/be2iscsi/be_mgmt.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2015 Avago Technologies
+ * Copyright (C) 2005 - 2015 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -12,7 +12,7 @@
  * Contact Information:
  * linux-drivers@avagotech.com
  *
- * Avago Technologies
+ * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
  */
@@ -330,10 +330,13 @@ ssize_t beiscsi_phys_port_disp(struct device *dev,
 
 void beiscsi_offload_cxn_v0(struct beiscsi_offload_params *params,
 			     struct wrb_handle *pwrb_handle,
-			     struct be_mem_descriptor *mem_descr);
+			     struct be_mem_descriptor *mem_descr,
+			     struct hwi_wrb_context *pwrb_context);
 
 void beiscsi_offload_cxn_v2(struct beiscsi_offload_params *params,
-			     struct wrb_handle *pwrb_handle);
+			     struct wrb_handle *pwrb_handle,
+			     struct hwi_wrb_context *pwrb_context);
+
 void beiscsi_ue_detect(struct beiscsi_hba *phba);
 int be_cmd_modify_eq_delay(struct beiscsi_hba *phba,
 			 struct be_set_eqd *, int num);
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index 8367c11d5..299c6f80d 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -800,7 +800,6 @@ struct scsi_host_template bfad_im_scsi_host_template = {
 	.shost_attrs = bfad_im_host_attrs,
 	.max_sectors = BFAD_MAX_SECTORS,
 	.vendor_id = BFA_PCI_VENDOR_ID_BROCADE,
-	.use_blk_tags = 1,
 };
 
 struct scsi_host_template bfad_im_vport_template = {
@@ -822,7 +821,6 @@ struct scsi_host_template bfad_im_vport_template = {
 	.use_clustering = ENABLE_CLUSTERING,
 	.shost_attrs = bfad_im_vport_attrs,
 	.max_sectors = BFAD_MAX_SECTORS,
-	.use_blk_tags = 1,
 };
 
 bfa_status_t
diff --git a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
index fe2106c91..ac1c0b631 100644
--- a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
+++ b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
@@ -1,9 +1,9 @@
-/* 57xx_hsi_bnx2fc.h: QLogic NetXtreme II Linux FCoE offload driver.
+/* 57xx_hsi_bnx2fc.h: QLogic Linux FCoE offload driver.
  * Handles operations such as session offload/upload etc, and manages
  * session resources such as connection id and qp resources.
  *
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/scsi/bnx2fc/Kconfig b/drivers/scsi/bnx2fc/Kconfig
index 097882882..d401a096d 100644
--- a/drivers/scsi/bnx2fc/Kconfig
+++ b/drivers/scsi/bnx2fc/Kconfig
@@ -1,5 +1,5 @@
 config SCSI_BNX2X_FCOE
-	tristate "QLogic NetXtreme II FCoE support"
+	tristate "QLogic FCoE offload support"
 	depends on PCI
 	depends on (IPV6 || IPV6=n)
 	depends on LIBFC
@@ -9,5 +9,4 @@ config SCSI_BNX2X_FCOE
 	select NET_VENDOR_BROADCOM
 	select CNIC
 	---help---
-	This driver supports FCoE offload for the QLogic NetXtreme II
-	devices.
+	This driver supports FCoE offload for the QLogic devices.
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 1346e052e..499e369ea 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -1,7 +1,7 @@
-/* bnx2fc.h: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc.h: QLogic Linux FCoE offload driver.
  *
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -65,7 +65,7 @@
 #include "bnx2fc_constants.h"
 
 #define BNX2FC_NAME		"bnx2fc"
-#define BNX2FC_VERSION		"2.4.2"
+#define BNX2FC_VERSION		"2.9.6"
 
 #define PFX			"bnx2fc: "
 
@@ -303,7 +303,6 @@ struct bnx2fc_rport {
 #define BNX2FC_FLAG_OFLD_REQ_CMPL	0x5
 #define BNX2FC_FLAG_CTX_ALLOC_FAILURE	0x6
 #define BNX2FC_FLAG_UPLD_REQ_COMPL	0x7
-#define BNX2FC_FLAG_EXPL_LOGO		0x8
 #define BNX2FC_FLAG_DISABLE_FAILED	0x9
 #define BNX2FC_FLAG_ENABLED		0xa
 
diff --git a/drivers/scsi/bnx2fc/bnx2fc_constants.h b/drivers/scsi/bnx2fc/bnx2fc_constants.h
index e147cc7ee..5b20efb66 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_constants.h
+++ b/drivers/scsi/bnx2fc/bnx2fc_constants.h
@@ -1,9 +1,9 @@
-/* bnx2fc_constants.h: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_constants.h: QLogic Linux FCoE offload driver.
  * Handles operations such as session offload/upload etc, and manages
  * session resources such as connection id and qp resources.
  *
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/scsi/bnx2fc/bnx2fc_debug.c b/drivers/scsi/bnx2fc/bnx2fc_debug.c
index d055df01f..c9e0bc7fa 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_debug.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_debug.c
@@ -1,9 +1,9 @@
-/* bnx2fc_debug.c: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_debug.c: QLogic Linux FCoE offload driver.
  * Handles operations such as session offload/upload etc, and manages
  * session resources such as connection id and qp resources.
  *
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/scsi/bnx2fc/bnx2fc_debug.h b/drivers/scsi/bnx2fc/bnx2fc_debug.h
index 2b9006774..34fda3e04 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_debug.h
+++ b/drivers/scsi/bnx2fc/bnx2fc_debug.h
@@ -1,9 +1,9 @@
-/* bnx2fc_debug.h: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_debug.h: QLogic Linux FCoE offload driver.
  * Handles operations such as session offload/upload etc, and manages
  * session resources such as connection id and qp resources.
  *
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/scsi/bnx2fc/bnx2fc_els.c b/drivers/scsi/bnx2fc/bnx2fc_els.c
index ef355c13c..5beea776b 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_els.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_els.c
@@ -1,10 +1,10 @@
 /*
- * bnx2fc_els.c: QLogic NetXtreme II Linux FCoE offload driver.
+ * bnx2fc_els.c: QLogic Linux FCoE offload driver.
  * This file contains helper routines that handle ELS requests
  * and responses.
  *
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -689,8 +689,7 @@ static int bnx2fc_initiate_els(struct bnx2fc_rport *tgt, unsigned int op,
 		rc = -EINVAL;
 		goto els_err;
 	}
-	if (!(test_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags)) ||
-	     (test_bit(BNX2FC_FLAG_EXPL_LOGO, &tgt->flags))) {
+	if (!(test_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags))) {
 		printk(KERN_ERR PFX "els 0x%x: tgt not ready\n", op);
 		rc = -EINVAL;
 		goto els_err;
@@ -707,6 +706,7 @@ static int bnx2fc_initiate_els(struct bnx2fc_rport *tgt, unsigned int op,
 	els_req->cb_func = cb_func;
 	cb_arg->io_req = els_req;
 	els_req->cb_arg = cb_arg;
+	els_req->data_xfer_len = data_len;
 
 	mp_req = (struct bnx2fc_mp_req *)&(els_req->mp_req);
 	rc = bnx2fc_init_mp_req(els_req);
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index d5cdc4776..67405c628 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -1,10 +1,10 @@
-/* bnx2fc_fcoe.c: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_fcoe.c: QLogic Linux FCoE offload driver.
  * This file contains the code that interacts with libfc, libfcoe,
  * cnic modules to create FCoE instances, send/receive non-offloaded
  * FIP/FCoE packets, listen to link events etc.
  *
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -23,16 +23,16 @@ DEFINE_PER_CPU(struct bnx2fc_percpu_s, bnx2fc_percpu);
 
 #define DRV_MODULE_NAME		"bnx2fc"
 #define DRV_MODULE_VERSION	BNX2FC_VERSION
-#define DRV_MODULE_RELDATE	"Dec 11, 2013"
+#define DRV_MODULE_RELDATE	"October 15, 2015"
 
 
 static char version[] =
-		"QLogic NetXtreme II FCoE Driver " DRV_MODULE_NAME \
+		"QLogic FCoE Driver " DRV_MODULE_NAME \
 		" v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
 
 MODULE_AUTHOR("Bhanu Prakash Gollapudi <bprakash@broadcom.com>");
-MODULE_DESCRIPTION("QLogic NetXtreme II BCM57710 FCoE Driver");
+MODULE_DESCRIPTION("QLogic FCoE Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 
@@ -856,7 +856,6 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event,
 		return;
 
 	default:
-		printk(KERN_ERR PFX "Unknown netevent %ld", event);
 		return;
 	}
 
@@ -2092,7 +2091,7 @@ static int __bnx2fc_enable(struct fcoe_ctlr *ctlr)
 {
 	struct bnx2fc_interface *interface = fcoe_ctlr_priv(ctlr);
 	struct bnx2fc_hba *hba;
-	struct cnic_fc_npiv_tbl npiv_tbl;
+	struct cnic_fc_npiv_tbl *npiv_tbl;
 	struct fc_lport *lport;
 
 	if (interface->enabled == false) {
@@ -2124,11 +2123,16 @@ static int __bnx2fc_enable(struct fcoe_ctlr *ctlr)
 	if (!hba->cnic->get_fc_npiv_tbl)
 		goto done;
 
-	memset(&npiv_tbl, 0, sizeof(npiv_tbl));
-	if (hba->cnic->get_fc_npiv_tbl(hba->cnic, &npiv_tbl))
+	npiv_tbl = kzalloc(sizeof(struct cnic_fc_npiv_tbl), GFP_KERNEL);
+	if (!npiv_tbl)
 		goto done;
 
-	bnx2fc_npiv_create_vports(lport, &npiv_tbl);
+	if (hba->cnic->get_fc_npiv_tbl(hba->cnic, npiv_tbl))
+		goto done_free;
+
+	bnx2fc_npiv_create_vports(lport, npiv_tbl);
+done_free:
+	kfree(npiv_tbl);
 done:
 	return 0;
 }
@@ -2863,7 +2867,6 @@ static struct scsi_host_template bnx2fc_shost_template = {
 	.use_clustering		= ENABLE_CLUSTERING,
 	.sg_tablesize		= BNX2FC_MAX_BDS_PER_CMD,
 	.max_sectors		= 1024,
-	.use_blk_tags		= 1,
 	.track_queue_depth	= 1,
 };
 
diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index c6688d72a..28c671b60 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -1,9 +1,9 @@
-/* bnx2fc_hwi.c: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_hwi.c: QLogic Linux FCoE offload driver.
  * This file contains the code that low level functions that interact
  * with 57712 FCoE firmware.
  *
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 9ecca8504..0002caf68 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1,8 +1,8 @@
-/* bnx2fc_io.c: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_io.c: QLogic Linux FCoE offload driver.
  * IO manager and SCSI IO processing.
  *
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -40,11 +40,8 @@ static void bnx2fc_cmd_timeout(struct work_struct *work)
 {
 	struct bnx2fc_cmd *io_req = container_of(work, struct bnx2fc_cmd,
 						 timeout_work.work);
-	struct fc_lport *lport;
-	struct fc_rport_priv *rdata;
 	u8 cmd_type = io_req->cmd_type;
 	struct bnx2fc_rport *tgt = io_req->tgt;
-	int logo_issued;
 	int rc;
 
 	BNX2FC_IO_DBG(io_req, "cmd_timeout, cmd_type = %d,"
@@ -80,25 +77,14 @@ static void bnx2fc_cmd_timeout(struct work_struct *work)
 					io_req->refcount.refcount.counter);
 			if (!(test_and_set_bit(BNX2FC_FLAG_ABTS_DONE,
 					       &io_req->req_flags))) {
-
-				lport = io_req->port->lport;
-				rdata = io_req->tgt->rdata;
-				logo_issued = test_and_set_bit(
-						BNX2FC_FLAG_EXPL_LOGO,
-						&tgt->flags);
+				/*
+				 * Cleanup and return original command to
+				 * mid-layer.
+				 */
+				bnx2fc_initiate_cleanup(io_req);
 				kref_put(&io_req->refcount, bnx2fc_cmd_release);
 				spin_unlock_bh(&tgt->tgt_lock);
 
-				/* Explicitly logo the target */
-				if (!logo_issued) {
-					BNX2FC_IO_DBG(io_req, "Explicit "
-						   "logo - tgt flags = 0x%lx\n",
-						   tgt->flags);
-
-					mutex_lock(&lport->disc.disc_mutex);
-					lport->tt.rport_logoff(rdata);
-					mutex_unlock(&lport->disc.disc_mutex);
-				}
 				return;
 			}
 		} else {
@@ -116,28 +102,10 @@ static void bnx2fc_cmd_timeout(struct work_struct *work)
 				rc = bnx2fc_initiate_abts(io_req);
 				if (rc == SUCCESS)
 					goto done;
-				/*
-				 * Explicitly logo the target if
-				 * abts initiation fails
-				 */
-				lport = io_req->port->lport;
-				rdata = io_req->tgt->rdata;
-				logo_issued = test_and_set_bit(
-						BNX2FC_FLAG_EXPL_LOGO,
-						&tgt->flags);
+
 				kref_put(&io_req->refcount, bnx2fc_cmd_release);
 				spin_unlock_bh(&tgt->tgt_lock);
 
-				if (!logo_issued) {
-					BNX2FC_IO_DBG(io_req, "Explicit "
-						   "logo - tgt flags = 0x%lx\n",
-						   tgt->flags);
-
-
-					mutex_lock(&lport->disc.disc_mutex);
-					lport->tt.rport_logoff(rdata);
-					mutex_unlock(&lport->disc.disc_mutex);
-				}
 				return;
 			} else {
 				BNX2FC_IO_DBG(io_req, "IO already in "
@@ -152,22 +120,9 @@ static void bnx2fc_cmd_timeout(struct work_struct *work)
 
 			if (!test_and_set_bit(BNX2FC_FLAG_ABTS_DONE,
 					      &io_req->req_flags)) {
-				lport = io_req->port->lport;
-				rdata = io_req->tgt->rdata;
-				logo_issued = test_and_set_bit(
-						BNX2FC_FLAG_EXPL_LOGO,
-						&tgt->flags);
 				kref_put(&io_req->refcount, bnx2fc_cmd_release);
 				spin_unlock_bh(&tgt->tgt_lock);
 
-				/* Explicitly logo the target */
-				if (!logo_issued) {
-					BNX2FC_IO_DBG(io_req, "Explicitly logo"
-						   "(els)\n");
-					mutex_lock(&lport->disc.disc_mutex);
-					lport->tt.rport_logoff(rdata);
-					mutex_unlock(&lport->disc.disc_mutex);
-				}
 				return;
 			}
 		} else {
@@ -623,8 +578,12 @@ int bnx2fc_init_mp_req(struct bnx2fc_cmd *io_req)
 	mp_req = (struct bnx2fc_mp_req *)&(io_req->mp_req);
 	memset(mp_req, 0, sizeof(struct bnx2fc_mp_req));
 
-	mp_req->req_len = sizeof(struct fcp_cmnd);
-	io_req->data_xfer_len = mp_req->req_len;
+	if (io_req->cmd_type != BNX2FC_ELS) {
+		mp_req->req_len = sizeof(struct fcp_cmnd);
+		io_req->data_xfer_len = mp_req->req_len;
+	} else
+		mp_req->req_len = io_req->data_xfer_len;
+
 	mp_req->req_buf = dma_alloc_coherent(&hba->pcidev->dev, CNIC_PAGE_SIZE,
 					     &mp_req->req_buf_dma,
 					     GFP_ATOMIC);
@@ -1108,18 +1067,11 @@ int bnx2fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
 	return bnx2fc_initiate_tmf(sc_cmd, FCP_TMF_LUN_RESET);
 }
 
-int bnx2fc_expl_logo(struct fc_lport *lport, struct bnx2fc_cmd *io_req)
+int bnx2fc_abts_cleanup(struct bnx2fc_cmd *io_req)
 {
 	struct bnx2fc_rport *tgt = io_req->tgt;
-	struct fc_rport_priv *rdata = tgt->rdata;
-	int logo_issued;
 	int rc = SUCCESS;
-	int wait_cnt = 0;
 
-	BNX2FC_IO_DBG(io_req, "Expl logo - tgt flags = 0x%lx\n",
-		      tgt->flags);
-	logo_issued = test_and_set_bit(BNX2FC_FLAG_EXPL_LOGO,
-				       &tgt->flags);
 	io_req->wait_for_comp = 1;
 	bnx2fc_initiate_cleanup(io_req);
 
@@ -1132,21 +1084,8 @@ int bnx2fc_expl_logo(struct fc_lport *lport, struct bnx2fc_cmd *io_req)
 	 * release the reference taken in eh_abort to allow the
 	 * target to re-login after flushing IOs
 	 */
-	 kref_put(&io_req->refcount, bnx2fc_cmd_release);
-
-	if (!logo_issued) {
-		clear_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags);
-		mutex_lock(&lport->disc.disc_mutex);
-		lport->tt.rport_logoff(rdata);
-		mutex_unlock(&lport->disc.disc_mutex);
-		do {
-			msleep(BNX2FC_RELOGIN_WAIT_TIME);
-			if (wait_cnt++ > BNX2FC_RELOGIN_WAIT_CNT) {
-				rc = FAILED;
-				break;
-			}
-		} while (!test_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags));
-	}
+	kref_put(&io_req->refcount, bnx2fc_cmd_release);
+
 	spin_lock_bh(&tgt->tgt_lock);
 	return rc;
 }
@@ -1248,7 +1187,7 @@ int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd)
 		if (cancel_delayed_work(&io_req->timeout_work))
 			kref_put(&io_req->refcount,
 				 bnx2fc_cmd_release); /* drop timer hold */
-		rc = bnx2fc_expl_logo(lport, io_req);
+		rc = bnx2fc_abts_cleanup(io_req);
 		/* This only occurs when an task abort was requested while ABTS
 		   is in progress.  Setting the IO_CLEANUP flag will skip the
 		   RRQ process in the case when the fw generated SCSI_CMD cmpl
@@ -1287,7 +1226,7 @@ int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd)
 		/* Let the scsi-ml try to recover this command */
 		printk(KERN_ERR PFX "abort failed, xid = 0x%x\n",
 		       io_req->xid);
-		rc = bnx2fc_expl_logo(lport, io_req);
+		rc = bnx2fc_abts_cleanup(io_req);
 		goto out;
 	} else {
 		/*
@@ -1755,7 +1694,10 @@ static void bnx2fc_parse_fcp_rsp(struct bnx2fc_cmd *io_req,
 	int fcp_rsp_len = 0;
 
 	io_req->fcp_status = FC_GOOD;
-	io_req->fcp_resid = fcp_rsp->fcp_resid;
+	io_req->fcp_resid = 0;
+	if (rsp_flags & (FCOE_FCP_RSP_FLAGS_FCP_RESID_OVER |
+	    FCOE_FCP_RSP_FLAGS_FCP_RESID_UNDER))
+		io_req->fcp_resid = fcp_rsp->fcp_resid;
 
 	io_req->scsi_comp_flags = rsp_flags;
 	CMD_SCSI_STATUS(sc_cmd) = io_req->cdb_status =
diff --git a/drivers/scsi/bnx2fc/bnx2fc_tgt.c b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
index c66c70841..08ec318af 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_tgt.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
@@ -1,9 +1,9 @@
-/* bnx2fc_tgt.c: QLogic NetXtreme II Linux FCoE offload driver.
+/* bnx2fc_tgt.c: QLogic Linux FCoE offload driver.
  * Handles operations such as session offload/upload etc, and manages
  * session resources such as connection id and qp resources.
  *
- * Copyright (c) 2008 - 2013 Broadcom Corporation
- * Copyright (c) 2014, QLogic Corporation
+ * Copyright (c) 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -560,12 +560,6 @@ void bnx2fc_rport_event_handler(struct fc_lport *lport,
 		    (hba->num_ofld_sess == 0)) {
 			wake_up_interruptible(&hba->shutdown_wait);
 		}
-		if (test_bit(BNX2FC_FLAG_EXPL_LOGO, &tgt->flags)) {
-			printk(KERN_ERR PFX "Relogin to the tgt\n");
-			mutex_lock(&lport->disc.disc_mutex);
-			lport->tt.rport_login(rdata);
-			mutex_unlock(&lport->disc.disc_mutex);
-		}
 		mutex_unlock(&hba->hba_mutex);
 
 		break;
diff --git a/drivers/scsi/csiostor/csio_scsi.c b/drivers/scsi/csiostor/csio_scsi.c
index 2c4562d82..c2a6f9f29 100644
--- a/drivers/scsi/csiostor/csio_scsi.c
+++ b/drivers/scsi/csiostor/csio_scsi.c
@@ -2283,7 +2283,6 @@ struct scsi_host_template csio_fcoe_shost_template = {
 	.use_clustering		= ENABLE_CLUSTERING,
 	.shost_attrs		= csio_fcoe_lport_attrs,
 	.max_sectors		= CSIO_MAX_SECTOR_SIZE,
-	.use_blk_tags		= 1,
 };
 
 struct scsi_host_template csio_fcoe_shost_vport_template = {
@@ -2303,7 +2302,6 @@ struct scsi_host_template csio_fcoe_shost_vport_template = {
 	.use_clustering		= ENABLE_CLUSTERING,
 	.shost_attrs		= csio_fcoe_vport_attrs,
 	.max_sectors		= CSIO_MAX_SECTOR_SIZE,
-	.use_blk_tags		= 1,
 };
 
 /*
diff --git a/drivers/scsi/cxgbi/cxgb3i/Kbuild b/drivers/scsi/cxgbi/cxgb3i/Kbuild
index 6f095e28a..961a12f6d 100644
--- a/drivers/scsi/cxgbi/cxgb3i/Kbuild
+++ b/drivers/scsi/cxgbi/cxgb3i/Kbuild
@@ -1,3 +1,3 @@
-EXTRA_CFLAGS += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb3
+ccflags-y += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb3
 
 obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o
diff --git a/drivers/scsi/cxgbi/cxgb4i/Kbuild b/drivers/scsi/cxgbi/cxgb4i/Kbuild
index 8290cdaa4..374586437 100644
--- a/drivers/scsi/cxgbi/cxgb4i/Kbuild
+++ b/drivers/scsi/cxgbi/cxgb4i/Kbuild
@@ -1,3 +1,3 @@
-EXTRA_CFLAGS += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb4
+ccflags-y += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb4
 
 obj-$(CONFIG_SCSI_CXGB4_ISCSI) += cxgb4i.o
diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index de6feb896..804806e1c 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -160,7 +160,7 @@ static struct scsi_transport_template *cxgb4i_stt;
 
 #define DIV_ROUND_UP(n, d)	(((n) + (d) - 1) / (d))
 #define RCV_BUFSIZ_MASK		0x3FFU
-#define MAX_IMM_TX_PKT_LEN	128
+#define MAX_IMM_TX_PKT_LEN	256
 
 static int push_tx_frames(struct cxgbi_sock *, int);
 
diff --git a/drivers/scsi/cxlflash/common.h b/drivers/scsi/cxlflash/common.h
index 1c5603714..c11cd193f 100644
--- a/drivers/scsi/cxlflash/common.h
+++ b/drivers/scsi/cxlflash/common.h
@@ -16,10 +16,12 @@
 #define _CXLFLASH_COMMON_H
 
 #include <linux/list.h>
+#include <linux/rwsem.h>
 #include <linux/types.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
 
+extern const struct file_operations cxlflash_cxl_fops;
 
 #define MAX_CONTEXT  CXLFLASH_MAX_CONTEXT       /* num contexts per afu */
 
@@ -78,7 +80,7 @@ enum cxlflash_init_state {
 
 enum cxlflash_state {
 	STATE_NORMAL,	/* Normal running state, everything good */
-	STATE_LIMBO,	/* Limbo running state, trying to reset/recover */
+	STATE_RESET,	/* Reset state, trying to reset/recover */
 	STATE_FAILTERM	/* Failed/terminating state, error out users/threads */
 };
 
@@ -101,29 +103,28 @@ struct cxlflash_cfg {
 	enum cxlflash_init_state init_state;
 	enum cxlflash_lr_state lr_state;
 	int lr_port;
+	atomic_t scan_host_needed;
 
 	struct cxl_afu *cxl_afu;
-
-	struct pci_pool *cxlflash_cmd_pool;
 	struct pci_dev *parent_dev;
 
 	atomic_t recovery_threads;
 	struct mutex ctx_recovery_mutex;
 	struct mutex ctx_tbl_list_mutex;
+	struct rw_semaphore ioctl_rwsem;
 	struct ctx_info *ctx_tbl[MAX_CONTEXT];
 	struct list_head ctx_err_recovery; /* contexts w/ recovery pending */
 	struct file_operations cxl_fops;
 
-	atomic_t num_user_contexts;
-
 	/* Parameters that are LUN table related */
 	int last_lun_index[CXLFLASH_NUM_FC_PORTS];
 	int promote_lun_index;
 	struct list_head lluns; /* list of llun_info structs */
 
 	wait_queue_head_t tmf_waitq;
+	spinlock_t tmf_slock;
 	bool tmf_active;
-	wait_queue_head_t limbo_waitq;
+	wait_queue_head_t reset_waitq;
 	enum cxlflash_state state;
 };
 
@@ -160,9 +161,9 @@ struct afu {
 
 	/* AFU HW */
 	struct cxl_ioctl_start_work work;
-	struct cxlflash_afu_map *afu_map;	/* entire MMIO map */
-	struct sisl_host_map *host_map;		/* MC host map */
-	struct sisl_ctrl_map *ctrl_map;		/* MC control map */
+	struct cxlflash_afu_map __iomem *afu_map;	/* entire MMIO map */
+	struct sisl_host_map __iomem *host_map;		/* MC host map */
+	struct sisl_ctrl_map __iomem *ctrl_map;		/* MC control map */
 
 	ctx_hndl_t ctx_hndl;	/* master's context handle */
 	u64 *hrrq_start;
@@ -175,7 +176,7 @@ struct afu {
 	u32 cmd_couts;		/* Number of command checkouts */
 	u32 internal_lun;	/* User-desired LUN mode for this AFU */
 
-	char version[8];
+	char version[16];
 	u64 interface_version;
 
 	struct cxlflash_cfg *parent; /* Pointer back to parent cxlflash_cfg */
@@ -184,17 +185,12 @@ struct afu {
 
 static inline u64 lun_to_lunid(u64 lun)
 {
-	u64 lun_id;
+	__be64 lun_id;
 
 	int_to_scsilun(lun, (struct scsi_lun *)&lun_id);
-	return swab64(lun_id);
+	return be64_to_cpu(lun_id);
 }
 
-int cxlflash_send_cmd(struct afu *, struct afu_cmd *);
-void cxlflash_wait_resp(struct afu *, struct afu_cmd *);
-int cxlflash_afu_reset(struct cxlflash_cfg *);
-struct afu_cmd *cxlflash_cmd_checkout(struct afu *);
-void cxlflash_cmd_checkin(struct afu_cmd *);
 int cxlflash_afu_sync(struct afu *, ctx_hndl_t, res_hndl_t, u8);
 void cxlflash_list_init(void);
 void cxlflash_term_global_luns(void);
diff --git a/drivers/scsi/cxlflash/lunmgt.c b/drivers/scsi/cxlflash/lunmgt.c
index d98ad0ff6..a0923cade 100644
--- a/drivers/scsi/cxlflash/lunmgt.c
+++ b/drivers/scsi/cxlflash/lunmgt.c
@@ -41,7 +41,6 @@ static struct llun_info *create_local(struct scsi_device *sdev, u8 *wwid)
 	}
 
 	lli->sdev = sdev;
-	lli->newly_created = true;
 	lli->host_no = sdev->host->host_no;
 	lli->in_table = false;
 
@@ -74,24 +73,19 @@ out:
 }
 
 /**
- * refresh_local() - find and update local LUN information structure by WWID
+ * lookup_local() - find a local LUN information structure by WWID
  * @cfg:	Internal structure associated with the host.
  * @wwid:	WWID associated with LUN.
  *
- * When the LUN is found, mark it by updating it's newly_created field.
- *
  * Return: Found local lun_info structure on success, NULL on failure
- * If a LUN with the WWID is found in the list, refresh it's state.
  */
-static struct llun_info *refresh_local(struct cxlflash_cfg *cfg, u8 *wwid)
+static struct llun_info *lookup_local(struct cxlflash_cfg *cfg, u8 *wwid)
 {
 	struct llun_info *lli, *temp;
 
 	list_for_each_entry_safe(lli, temp, &cfg->lluns, list)
-		if (!memcmp(lli->wwid, wwid, DK_CXLFLASH_MANAGE_LUN_WWID_LEN)) {
-			lli->newly_created = false;
+		if (!memcmp(lli->wwid, wwid, DK_CXLFLASH_MANAGE_LUN_WWID_LEN))
 			return lli;
-		}
 
 	return NULL;
 }
@@ -120,7 +114,8 @@ static struct glun_info *lookup_global(u8 *wwid)
  *
  * The LUN is kept both in a local list (per adapter) and in a global list
  * (across all adapters). Certain attributes of the LUN are local to the
- * adapter (such as index, port selection mask etc.).
+ * adapter (such as index, port selection mask, etc.).
+ *
  * The block allocation map is shared across all adapters (i.e. associated
  * wih the global list). Since different attributes are associated with
  * the per adapter and global entries, allocate two separate structures for each
@@ -128,6 +123,8 @@ static struct glun_info *lookup_global(u8 *wwid)
  *
  * Keep a pointer back from the local to the global entry.
  *
+ * This routine assumes the caller holds the global mutex.
+ *
  * Return: Found/Allocated local lun_info structure on success, NULL on failure
  */
 static struct llun_info *find_and_create_lun(struct scsi_device *sdev, u8 *wwid)
@@ -137,11 +134,10 @@ static struct llun_info *find_and_create_lun(struct scsi_device *sdev, u8 *wwid)
 	struct Scsi_Host *shost = sdev->host;
 	struct cxlflash_cfg *cfg = shost_priv(shost);
 
-	mutex_lock(&global.mutex);
 	if (unlikely(!wwid))
 		goto out;
 
-	lli = refresh_local(cfg, wwid);
+	lli = lookup_local(cfg, wwid);
 	if (lli)
 		goto out;
 
@@ -169,7 +165,6 @@ static struct llun_info *find_and_create_lun(struct scsi_device *sdev, u8 *wwid)
 	list_add(&gli->list, &global.gluns);
 
 out:
-	mutex_unlock(&global.mutex);
 	pr_debug("%s: returning %p\n", __func__, lli);
 	return lli;
 }
@@ -235,10 +230,11 @@ int cxlflash_manage_lun(struct scsi_device *sdev,
 	u64 flags = manage->hdr.flags;
 	u32 chan = sdev->channel;
 
+	mutex_lock(&global.mutex);
 	lli = find_and_create_lun(sdev, manage->wwid);
 	pr_debug("%s: ENTER: WWID = %016llX%016llX, flags = %016llX li = %p\n",
-		 __func__, get_unaligned_le64(&manage->wwid[0]),
-		 get_unaligned_le64(&manage->wwid[8]),
+		 __func__, get_unaligned_be64(&manage->wwid[0]),
+		 get_unaligned_be64(&manage->wwid[8]),
 		 manage->hdr.flags, lli);
 	if (unlikely(!lli)) {
 		rc = -ENOMEM;
@@ -246,21 +242,28 @@ int cxlflash_manage_lun(struct scsi_device *sdev,
 	}
 
 	if (flags & DK_CXLFLASH_MANAGE_LUN_ENABLE_SUPERPIPE) {
-		if (lli->newly_created)
-			lli->port_sel = CHAN2PORT(chan);
-		else
-			lli->port_sel = BOTH_PORTS;
-		/* Store off lun in unpacked, AFU-friendly format */
+		/*
+		 * Update port selection mask based upon channel, store off LUN
+		 * in unpacked, AFU-friendly format, and hang LUN reference in
+		 * the sdev.
+		 */
+		lli->port_sel |= CHAN2PORT(chan);
 		lli->lun_id[chan] = lun_to_lunid(sdev->lun);
 		sdev->hostdata = lli;
 	} else if (flags & DK_CXLFLASH_MANAGE_LUN_DISABLE_SUPERPIPE) {
 		if (lli->parent->mode != MODE_NONE)
 			rc = -EBUSY;
-		else
+		else {
 			sdev->hostdata = NULL;
+			lli->port_sel &= ~CHAN2PORT(chan);
+		}
 	}
 
+	pr_debug("%s: port_sel = %08X chan = %u lun_id = %016llX\n", __func__,
+		 lli->port_sel, chan, lli->lun_id[chan]);
+
 out:
+	mutex_unlock(&global.mutex);
 	pr_debug("%s: returning rc=%d\n", __func__, rc);
 	return rc;
 }
diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index 3e3ccf16e..1e5bf0ca8 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -34,9 +34,8 @@ MODULE_AUTHOR("Manoj N. Kumar <manoj@linux.vnet.ibm.com>");
 MODULE_AUTHOR("Matthew R. Ochs <mrochs@linux.vnet.ibm.com>");
 MODULE_LICENSE("GPL");
 
-
 /**
- * cxlflash_cmd_checkout() - checks out an AFU command
+ * cmd_checkout() - checks out an AFU command
  * @afu:	AFU to checkout from.
  *
  * Commands are checked out in a round-robin fashion. Note that since
@@ -47,7 +46,7 @@ MODULE_LICENSE("GPL");
  *
  * Return: The checked out command or NULL when command pool is empty.
  */
-struct afu_cmd *cxlflash_cmd_checkout(struct afu *afu)
+static struct afu_cmd *cmd_checkout(struct afu *afu)
 {
 	int k, dec = CXLFLASH_NUM_CMDS;
 	struct afu_cmd *cmd;
@@ -58,8 +57,8 @@ struct afu_cmd *cxlflash_cmd_checkout(struct afu *afu)
 		cmd = &afu->cmd[k];
 
 		if (!atomic_dec_if_positive(&cmd->free)) {
-			pr_debug("%s: returning found index=%d\n",
-				 __func__, cmd->slot);
+			pr_devel("%s: returning found index=%d cmd=%p\n",
+				 __func__, cmd->slot, cmd);
 			memset(cmd->buf, 0, CMD_BUFSIZE);
 			memset(cmd->rcb.cdb, 0, sizeof(cmd->rcb.cdb));
 			return cmd;
@@ -70,7 +69,7 @@ struct afu_cmd *cxlflash_cmd_checkout(struct afu *afu)
 }
 
 /**
- * cxlflash_cmd_checkin() - checks in an AFU command
+ * cmd_checkin() - checks in an AFU command
  * @cmd:	AFU command to checkin.
  *
  * Safe to pass commands that have already been checked in. Several
@@ -79,7 +78,7 @@ struct afu_cmd *cxlflash_cmd_checkout(struct afu *afu)
  * to avoid clobbering values in the event that the command is checked
  * out right away.
  */
-void cxlflash_cmd_checkin(struct afu_cmd *cmd)
+static void cmd_checkin(struct afu_cmd *cmd)
 {
 	cmd->rcb.scp = NULL;
 	cmd->rcb.timeout = 0;
@@ -93,7 +92,7 @@ void cxlflash_cmd_checkin(struct afu_cmd *cmd)
 		return;
 	}
 
-	pr_debug("%s: released cmd %p index=%d\n", __func__, cmd, cmd->slot);
+	pr_devel("%s: released cmd %p index=%d\n", __func__, cmd, cmd->slot);
 }
 
 /**
@@ -107,6 +106,7 @@ static void process_cmd_err(struct afu_cmd *cmd, struct scsi_cmnd *scp)
 {
 	struct sisl_ioarcb *ioarcb;
 	struct sisl_ioasa *ioasa;
+	u32 resid;
 
 	if (unlikely(!cmd))
 		return;
@@ -115,9 +115,10 @@ static void process_cmd_err(struct afu_cmd *cmd, struct scsi_cmnd *scp)
 	ioasa = &(cmd->sa);
 
 	if (ioasa->rc.flags & SISL_RC_FLAGS_UNDERRUN) {
-		pr_debug("%s: cmd underrun cmd = %p scp = %p\n",
-			 __func__, cmd, scp);
-		scp->result = (DID_ERROR << 16);
+		resid = ioasa->resid;
+		scsi_set_resid(scp, resid);
+		pr_debug("%s: cmd underrun cmd = %p scp = %p, resid = %d\n",
+			 __func__, cmd, scp, resid);
 	}
 
 	if (ioasa->rc.flags & SISL_RC_FLAGS_OVERRUN) {
@@ -127,7 +128,7 @@ static void process_cmd_err(struct afu_cmd *cmd, struct scsi_cmnd *scp)
 	}
 
 	pr_debug("%s: cmd failed afu_rc=%d scsi_rc=%d fc_rc=%d "
-		 "afu_extra=0x%X, scsi_entra=0x%X, fc_extra=0x%X\n",
+		 "afu_extra=0x%X, scsi_extra=0x%X, fc_extra=0x%X\n",
 		 __func__, ioasa->rc.afu_rc, ioasa->rc.scsi_rc,
 		 ioasa->rc.fc_rc, ioasa->afu_extra, ioasa->scsi_extra,
 		 ioasa->fc_extra);
@@ -158,8 +159,7 @@ static void process_cmd_err(struct afu_cmd *cmd, struct scsi_cmnd *scp)
 				/* If the SISL_RC_FLAGS_OVERRUN flag was set,
 				 * then we will handle this error else where.
 				 * If not then we must handle it here.
-				 * This is probably an AFU bug. We will
-				 * attempt a retry to see if that resolves it.
+				 * This is probably an AFU bug.
 				 */
 				scp->result = (DID_ERROR << 16);
 			}
@@ -183,7 +183,7 @@ static void process_cmd_err(struct afu_cmd *cmd, struct scsi_cmnd *scp)
 		/* We have an AFU error */
 		switch (ioasa->rc.afu_rc) {
 		case SISL_AFU_RC_NO_CHANNELS:
-			scp->result = (DID_MEDIUM_ERROR << 16);
+			scp->result = (DID_NO_CONNECT << 16);
 			break;
 		case SISL_AFU_RC_DATA_DMA_ERR:
 			switch (ioasa->afu_extra) {
@@ -217,7 +217,6 @@ static void process_cmd_err(struct afu_cmd *cmd, struct scsi_cmnd *scp)
 static void cmd_complete(struct afu_cmd *cmd)
 {
 	struct scsi_cmnd *scp;
-	u32 resid;
 	ulong lock_flags;
 	struct afu *afu = cmd->parent;
 	struct cxlflash_cfg *cfg = afu->parent;
@@ -229,45 +228,179 @@ static void cmd_complete(struct afu_cmd *cmd)
 
 	if (cmd->rcb.scp) {
 		scp = cmd->rcb.scp;
-		if (unlikely(cmd->sa.rc.afu_rc ||
-			     cmd->sa.rc.scsi_rc ||
-			     cmd->sa.rc.fc_rc))
+		if (unlikely(cmd->sa.ioasc))
 			process_cmd_err(cmd, scp);
 		else
 			scp->result = (DID_OK << 16);
 
-		resid = cmd->sa.resid;
 		cmd_is_tmf = cmd->cmd_tmf;
-		cxlflash_cmd_checkin(cmd); /* Don't use cmd after here */
+		cmd_checkin(cmd); /* Don't use cmd after here */
 
-		pr_debug("%s: calling scsi_set_resid, scp=%p "
-			 "result=%X resid=%d\n", __func__,
-			 scp, scp->result, resid);
+		pr_debug_ratelimited("%s: calling scsi_done scp=%p result=%X "
+				     "ioasc=%d\n", __func__, scp, scp->result,
+				     cmd->sa.ioasc);
 
-		scsi_set_resid(scp, resid);
 		scsi_dma_unmap(scp);
 		scp->scsi_done(scp);
 
 		if (cmd_is_tmf) {
-			spin_lock_irqsave(&cfg->tmf_waitq.lock, lock_flags);
+			spin_lock_irqsave(&cfg->tmf_slock, lock_flags);
 			cfg->tmf_active = false;
 			wake_up_all_locked(&cfg->tmf_waitq);
-			spin_unlock_irqrestore(&cfg->tmf_waitq.lock,
-					       lock_flags);
+			spin_unlock_irqrestore(&cfg->tmf_slock, lock_flags);
 		}
 	} else
 		complete(&cmd->cevent);
 }
 
 /**
+ * context_reset() - timeout handler for AFU commands
+ * @cmd:	AFU command that timed out.
+ *
+ * Sends a reset to the AFU.
+ */
+static void context_reset(struct afu_cmd *cmd)
+{
+	int nretry = 0;
+	u64 rrin = 0x1;
+	u64 room = 0;
+	struct afu *afu = cmd->parent;
+	ulong lock_flags;
+
+	pr_debug("%s: cmd=%p\n", __func__, cmd);
+
+	spin_lock_irqsave(&cmd->slock, lock_flags);
+
+	/* Already completed? */
+	if (cmd->sa.host_use_b[0] & B_DONE) {
+		spin_unlock_irqrestore(&cmd->slock, lock_flags);
+		return;
+	}
+
+	cmd->sa.host_use_b[0] |= (B_DONE | B_ERROR | B_TIMEOUT);
+	spin_unlock_irqrestore(&cmd->slock, lock_flags);
+
+	/*
+	 * We really want to send this reset at all costs, so spread
+	 * out wait time on successive retries for available room.
+	 */
+	do {
+		room = readq_be(&afu->host_map->cmd_room);
+		atomic64_set(&afu->room, room);
+		if (room)
+			goto write_rrin;
+		udelay(nretry);
+	} while (nretry++ < MC_ROOM_RETRY_CNT);
+
+	pr_err("%s: no cmd_room to send reset\n", __func__);
+	return;
+
+write_rrin:
+	nretry = 0;
+	writeq_be(rrin, &afu->host_map->ioarrin);
+	do {
+		rrin = readq_be(&afu->host_map->ioarrin);
+		if (rrin != 0x1)
+			break;
+		/* Double delay each time */
+		udelay(2 << nretry);
+	} while (nretry++ < MC_ROOM_RETRY_CNT);
+}
+
+/**
+ * send_cmd() - sends an AFU command
+ * @afu:	AFU associated with the host.
+ * @cmd:	AFU command to send.
+ *
+ * Return:
+ *	0 on success, SCSI_MLQUEUE_HOST_BUSY on failure
+ */
+static int send_cmd(struct afu *afu, struct afu_cmd *cmd)
+{
+	struct cxlflash_cfg *cfg = afu->parent;
+	struct device *dev = &cfg->dev->dev;
+	int nretry = 0;
+	int rc = 0;
+	u64 room;
+	long newval;
+
+	/*
+	 * This routine is used by critical users such an AFU sync and to
+	 * send a task management function (TMF). Thus we want to retry a
+	 * bit before returning an error. To avoid the performance penalty
+	 * of MMIO, we spread the update of 'room' over multiple commands.
+	 */
+retry:
+	newval = atomic64_dec_if_positive(&afu->room);
+	if (!newval) {
+		do {
+			room = readq_be(&afu->host_map->cmd_room);
+			atomic64_set(&afu->room, room);
+			if (room)
+				goto write_ioarrin;
+			udelay(nretry);
+		} while (nretry++ < MC_ROOM_RETRY_CNT);
+
+		dev_err(dev, "%s: no cmd_room to send 0x%X\n",
+		       __func__, cmd->rcb.cdb[0]);
+
+		goto no_room;
+	} else if (unlikely(newval < 0)) {
+		/* This should be rare. i.e. Only if two threads race and
+		 * decrement before the MMIO read is done. In this case
+		 * just benefit from the other thread having updated
+		 * afu->room.
+		 */
+		if (nretry++ < MC_ROOM_RETRY_CNT) {
+			udelay(nretry);
+			goto retry;
+		}
+
+		goto no_room;
+	}
+
+write_ioarrin:
+	writeq_be((u64)&cmd->rcb, &afu->host_map->ioarrin);
+out:
+	pr_devel("%s: cmd=%p len=%d ea=%p rc=%d\n", __func__, cmd,
+		 cmd->rcb.data_len, (void *)cmd->rcb.data_ea, rc);
+	return rc;
+
+no_room:
+	afu->read_room = true;
+	schedule_work(&cfg->work_q);
+	rc = SCSI_MLQUEUE_HOST_BUSY;
+	goto out;
+}
+
+/**
+ * wait_resp() - polls for a response or timeout to a sent AFU command
+ * @afu:	AFU associated with the host.
+ * @cmd:	AFU command that was sent.
+ */
+static void wait_resp(struct afu *afu, struct afu_cmd *cmd)
+{
+	ulong timeout = msecs_to_jiffies(cmd->rcb.timeout * 2 * 1000);
+
+	timeout = wait_for_completion_timeout(&cmd->cevent, timeout);
+	if (!timeout)
+		context_reset(cmd);
+
+	if (unlikely(cmd->sa.ioasc != 0))
+		pr_err("%s: CMD 0x%X failed, IOASC: flags 0x%X, afu_rc 0x%X, "
+		       "scsi_rc 0x%X, fc_rc 0x%X\n", __func__, cmd->rcb.cdb[0],
+		       cmd->sa.rc.flags, cmd->sa.rc.afu_rc, cmd->sa.rc.scsi_rc,
+		       cmd->sa.rc.fc_rc);
+}
+
+/**
  * send_tmf() - sends a Task Management Function (TMF)
  * @afu:	AFU to checkout from.
  * @scp:	SCSI command from stack.
  * @tmfcmd:	TMF command to send.
  *
  * Return:
- *	0 on success
- *	SCSI_MLQUEUE_HOST_BUSY when host is busy
+ *	0 on success, SCSI_MLQUEUE_HOST_BUSY on failure
  */
 static int send_tmf(struct afu *afu, struct scsi_cmnd *scp, u64 tmfcmd)
 {
@@ -277,25 +410,27 @@ static int send_tmf(struct afu *afu, struct scsi_cmnd *scp, u64 tmfcmd)
 	short lflag = 0;
 	struct Scsi_Host *host = scp->device->host;
 	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)host->hostdata;
+	struct device *dev = &cfg->dev->dev;
 	ulong lock_flags;
 	int rc = 0;
+	ulong to;
 
-	cmd = cxlflash_cmd_checkout(afu);
+	cmd = cmd_checkout(afu);
 	if (unlikely(!cmd)) {
-		pr_err("%s: could not get a free command\n", __func__);
+		dev_err(dev, "%s: could not get a free command\n", __func__);
 		rc = SCSI_MLQUEUE_HOST_BUSY;
 		goto out;
 	}
 
-	/* If a Task Management Function is active, do not send one more.
-	 */
-	spin_lock_irqsave(&cfg->tmf_waitq.lock, lock_flags);
+	/* When Task Management Function is active do not send another */
+	spin_lock_irqsave(&cfg->tmf_slock, lock_flags);
 	if (cfg->tmf_active)
-		wait_event_interruptible_locked_irq(cfg->tmf_waitq,
-						    !cfg->tmf_active);
+		wait_event_interruptible_lock_irq(cfg->tmf_waitq,
+						  !cfg->tmf_active,
+						  cfg->tmf_slock);
 	cfg->tmf_active = true;
 	cmd->cmd_tmf = true;
-	spin_unlock_irqrestore(&cfg->tmf_waitq.lock, lock_flags);
+	spin_unlock_irqrestore(&cfg->tmf_slock, lock_flags);
 
 	cmd->rcb.ctx_id = afu->ctx_hndl;
 	cmd->rcb.port_sel = port_sel;
@@ -313,18 +448,27 @@ static int send_tmf(struct afu *afu, struct scsi_cmnd *scp, u64 tmfcmd)
 	memcpy(cmd->rcb.cdb, &tmfcmd, sizeof(tmfcmd));
 
 	/* Send the command */
-	rc = cxlflash_send_cmd(afu, cmd);
+	rc = send_cmd(afu, cmd);
 	if (unlikely(rc)) {
-		cxlflash_cmd_checkin(cmd);
-		spin_lock_irqsave(&cfg->tmf_waitq.lock, lock_flags);
+		cmd_checkin(cmd);
+		spin_lock_irqsave(&cfg->tmf_slock, lock_flags);
 		cfg->tmf_active = false;
-		spin_unlock_irqrestore(&cfg->tmf_waitq.lock, lock_flags);
+		spin_unlock_irqrestore(&cfg->tmf_slock, lock_flags);
 		goto out;
 	}
 
-	spin_lock_irqsave(&cfg->tmf_waitq.lock, lock_flags);
-	wait_event_interruptible_locked_irq(cfg->tmf_waitq, !cfg->tmf_active);
-	spin_unlock_irqrestore(&cfg->tmf_waitq.lock, lock_flags);
+	spin_lock_irqsave(&cfg->tmf_slock, lock_flags);
+	to = msecs_to_jiffies(5000);
+	to = wait_event_interruptible_lock_irq_timeout(cfg->tmf_waitq,
+						       !cfg->tmf_active,
+						       cfg->tmf_slock,
+						       to);
+	if (!to) {
+		cfg->tmf_active = false;
+		dev_err(dev, "%s: TMF timed out!\n", __func__);
+		rc = -1;
+	}
+	spin_unlock_irqrestore(&cfg->tmf_slock, lock_flags);
 out:
 	return rc;
 }
@@ -345,15 +489,13 @@ static const char *cxlflash_driver_info(struct Scsi_Host *host)
  * @host:	SCSI host associated with device.
  * @scp:	SCSI command to send.
  *
- * Return:
- *	0 on success
- *	SCSI_MLQUEUE_HOST_BUSY when host is busy
+ * Return: 0 on success, SCSI_MLQUEUE_HOST_BUSY on failure
  */
 static int cxlflash_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scp)
 {
 	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)host->hostdata;
 	struct afu *afu = cfg->afu;
-	struct pci_dev *pdev = cfg->dev;
+	struct device *dev = &cfg->dev->dev;
 	struct afu_cmd *cmd;
 	u32 port_sel = scp->device->channel + 1;
 	int nseg, i, ncount;
@@ -362,34 +504,34 @@ static int cxlflash_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scp)
 	short lflag = 0;
 	int rc = 0;
 
-	pr_debug("%s: (scp=%p) %d/%d/%d/%llu cdb=(%08X-%08X-%08X-%08X)\n",
-		 __func__, scp, host->host_no, scp->device->channel,
-		 scp->device->id, scp->device->lun,
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[0]),
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[1]),
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[2]),
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[3]));
+	dev_dbg_ratelimited(dev, "%s: (scp=%p) %d/%d/%d/%llu "
+			    "cdb=(%08X-%08X-%08X-%08X)\n",
+			    __func__, scp, host->host_no, scp->device->channel,
+			    scp->device->id, scp->device->lun,
+			    get_unaligned_be32(&((u32 *)scp->cmnd)[0]),
+			    get_unaligned_be32(&((u32 *)scp->cmnd)[1]),
+			    get_unaligned_be32(&((u32 *)scp->cmnd)[2]),
+			    get_unaligned_be32(&((u32 *)scp->cmnd)[3]));
 
-	/* If a Task Management Function is active, wait for it to complete
+	/*
+	 * If a Task Management Function is active, wait for it to complete
 	 * before continuing with regular commands.
 	 */
-	spin_lock_irqsave(&cfg->tmf_waitq.lock, lock_flags);
+	spin_lock_irqsave(&cfg->tmf_slock, lock_flags);
 	if (cfg->tmf_active) {
-		spin_unlock_irqrestore(&cfg->tmf_waitq.lock, lock_flags);
+		spin_unlock_irqrestore(&cfg->tmf_slock, lock_flags);
 		rc = SCSI_MLQUEUE_HOST_BUSY;
 		goto out;
 	}
-	spin_unlock_irqrestore(&cfg->tmf_waitq.lock, lock_flags);
+	spin_unlock_irqrestore(&cfg->tmf_slock, lock_flags);
 
 	switch (cfg->state) {
-	case STATE_LIMBO:
-		dev_dbg_ratelimited(&cfg->dev->dev, "%s: device in limbo!\n",
-				    __func__);
+	case STATE_RESET:
+		dev_dbg_ratelimited(dev, "%s: device is in reset!\n", __func__);
 		rc = SCSI_MLQUEUE_HOST_BUSY;
 		goto out;
 	case STATE_FAILTERM:
-		dev_dbg_ratelimited(&cfg->dev->dev, "%s: device has failed!\n",
-				    __func__);
+		dev_dbg_ratelimited(dev, "%s: device has failed!\n", __func__);
 		scp->result = (DID_NO_CONNECT << 16);
 		scp->scsi_done(scp);
 		rc = 0;
@@ -398,9 +540,9 @@ static int cxlflash_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scp)
 		break;
 	}
 
-	cmd = cxlflash_cmd_checkout(afu);
+	cmd = cmd_checkout(afu);
 	if (unlikely(!cmd)) {
-		pr_err("%s: could not get a free command\n", __func__);
+		dev_err(dev, "%s: could not get a free command\n", __func__);
 		rc = SCSI_MLQUEUE_HOST_BUSY;
 		goto out;
 	}
@@ -422,7 +564,7 @@ static int cxlflash_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scp)
 
 	nseg = scsi_dma_map(scp);
 	if (unlikely(nseg < 0)) {
-		dev_err(&pdev->dev, "%s: Fail DMA map! nseg=%d\n",
+		dev_err(dev, "%s: Fail DMA map! nseg=%d\n",
 			__func__, nseg);
 		rc = SCSI_MLQUEUE_HOST_BUSY;
 		goto out;
@@ -438,347 +580,34 @@ static int cxlflash_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scp)
 	memcpy(cmd->rcb.cdb, scp->cmnd, sizeof(cmd->rcb.cdb));
 
 	/* Send the command */
-	rc = cxlflash_send_cmd(afu, cmd);
+	rc = send_cmd(afu, cmd);
 	if (unlikely(rc)) {
-		cxlflash_cmd_checkin(cmd);
+		cmd_checkin(cmd);
 		scsi_dma_unmap(scp);
 	}
 
 out:
+	pr_devel("%s: returning rc=%d\n", __func__, rc);
 	return rc;
 }
 
 /**
- * cxlflash_eh_device_reset_handler() - reset a single LUN
- * @scp:	SCSI command to send.
- *
- * Return:
- *	SUCCESS as defined in scsi/scsi.h
- *	FAILED as defined in scsi/scsi.h
- */
-static int cxlflash_eh_device_reset_handler(struct scsi_cmnd *scp)
-{
-	int rc = SUCCESS;
-	struct Scsi_Host *host = scp->device->host;
-	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)host->hostdata;
-	struct afu *afu = cfg->afu;
-	int rcr = 0;
-
-	pr_debug("%s: (scp=%p) %d/%d/%d/%llu "
-		 "cdb=(%08X-%08X-%08X-%08X)\n", __func__, scp,
-		 host->host_no, scp->device->channel,
-		 scp->device->id, scp->device->lun,
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[0]),
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[1]),
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[2]),
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[3]));
-
-	switch (cfg->state) {
-	case STATE_NORMAL:
-		rcr = send_tmf(afu, scp, TMF_LUN_RESET);
-		if (unlikely(rcr))
-			rc = FAILED;
-		break;
-	case STATE_LIMBO:
-		wait_event(cfg->limbo_waitq, cfg->state != STATE_LIMBO);
-		if (cfg->state == STATE_NORMAL)
-			break;
-		/* fall through */
-	default:
-		rc = FAILED;
-		break;
-	}
-
-	pr_debug("%s: returning rc=%d\n", __func__, rc);
-	return rc;
-}
-
-/**
- * cxlflash_eh_host_reset_handler() - reset the host adapter
- * @scp:	SCSI command from stack identifying host.
- *
- * Return:
- *	SUCCESS as defined in scsi/scsi.h
- *	FAILED as defined in scsi/scsi.h
- */
-static int cxlflash_eh_host_reset_handler(struct scsi_cmnd *scp)
-{
-	int rc = SUCCESS;
-	int rcr = 0;
-	struct Scsi_Host *host = scp->device->host;
-	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)host->hostdata;
-
-	pr_debug("%s: (scp=%p) %d/%d/%d/%llu "
-		 "cdb=(%08X-%08X-%08X-%08X)\n", __func__, scp,
-		 host->host_no, scp->device->channel,
-		 scp->device->id, scp->device->lun,
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[0]),
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[1]),
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[2]),
-		 get_unaligned_be32(&((u32 *)scp->cmnd)[3]));
-
-	switch (cfg->state) {
-	case STATE_NORMAL:
-		cfg->state = STATE_LIMBO;
-		scsi_block_requests(cfg->host);
-		cxlflash_mark_contexts_error(cfg);
-		rcr = cxlflash_afu_reset(cfg);
-		if (rcr) {
-			rc = FAILED;
-			cfg->state = STATE_FAILTERM;
-		} else
-			cfg->state = STATE_NORMAL;
-		wake_up_all(&cfg->limbo_waitq);
-		scsi_unblock_requests(cfg->host);
-		break;
-	case STATE_LIMBO:
-		wait_event(cfg->limbo_waitq, cfg->state != STATE_LIMBO);
-		if (cfg->state == STATE_NORMAL)
-			break;
-		/* fall through */
-	default:
-		rc = FAILED;
-		break;
-	}
-
-	pr_debug("%s: returning rc=%d\n", __func__, rc);
-	return rc;
-}
-
-/**
- * cxlflash_change_queue_depth() - change the queue depth for the device
- * @sdev:	SCSI device destined for queue depth change.
- * @qdepth:	Requested queue depth value to set.
- *
- * The requested queue depth is capped to the maximum supported value.
- *
- * Return: The actual queue depth set.
- */
-static int cxlflash_change_queue_depth(struct scsi_device *sdev, int qdepth)
-{
-
-	if (qdepth > CXLFLASH_MAX_CMDS_PER_LUN)
-		qdepth = CXLFLASH_MAX_CMDS_PER_LUN;
-
-	scsi_change_queue_depth(sdev, qdepth);
-	return sdev->queue_depth;
-}
-
-/**
- * cxlflash_show_port_status() - queries and presents the current port status
- * @dev:	Generic device associated with the host owning the port.
- * @attr:	Device attribute representing the port.
- * @buf:	Buffer of length PAGE_SIZE to report back port status in ASCII.
- *
- * Return: The size of the ASCII string returned in @buf.
- */
-static ssize_t cxlflash_show_port_status(struct device *dev,
-					 struct device_attribute *attr,
-					 char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)shost->hostdata;
-	struct afu *afu = cfg->afu;
-
-	char *disp_status;
-	int rc;
-	u32 port;
-	u64 status;
-	u64 *fc_regs;
-
-	rc = kstrtouint((attr->attr.name + 4), 10, &port);
-	if (rc || (port >= NUM_FC_PORTS))
-		return 0;
-
-	fc_regs = &afu->afu_map->global.fc_regs[port][0];
-	status =
-	    (readq_be(&fc_regs[FC_MTIP_STATUS / 8]) & FC_MTIP_STATUS_MASK);
-
-	if (status == FC_MTIP_STATUS_ONLINE)
-		disp_status = "online";
-	else if (status == FC_MTIP_STATUS_OFFLINE)
-		disp_status = "offline";
-	else
-		disp_status = "unknown";
-
-	return snprintf(buf, PAGE_SIZE, "%s\n", disp_status);
-}
-
-/**
- * cxlflash_show_lun_mode() - presents the current LUN mode of the host
- * @dev:	Generic device associated with the host.
- * @attr:	Device attribute representing the lun mode.
- * @buf:	Buffer of length PAGE_SIZE to report back the LUN mode in ASCII.
- *
- * Return: The size of the ASCII string returned in @buf.
- */
-static ssize_t cxlflash_show_lun_mode(struct device *dev,
-				      struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)shost->hostdata;
-	struct afu *afu = cfg->afu;
-
-	return snprintf(buf, PAGE_SIZE, "%u\n", afu->internal_lun);
-}
-
-/**
- * cxlflash_store_lun_mode() - sets the LUN mode of the host
- * @dev:	Generic device associated with the host.
- * @attr:	Device attribute representing the lun mode.
- * @buf:	Buffer of length PAGE_SIZE containing the LUN mode in ASCII.
- * @count:	Length of data resizing in @buf.
- *
- * The CXL Flash AFU supports a dummy LUN mode where the external
- * links and storage are not required. Space on the FPGA is used
- * to create 1 or 2 small LUNs which are presented to the system
- * as if they were a normal storage device. This feature is useful
- * during development and also provides manufacturing with a way
- * to test the AFU without an actual device.
- *
- * 0 = external LUN[s] (default)
- * 1 = internal LUN (1 x 64K, 512B blocks, id 0)
- * 2 = internal LUN (1 x 64K, 4K blocks, id 0)
- * 3 = internal LUN (2 x 32K, 512B blocks, ids 0,1)
- * 4 = internal LUN (2 x 32K, 4K blocks, ids 0,1)
- *
- * Return: The size of the ASCII string returned in @buf.
- */
-static ssize_t cxlflash_store_lun_mode(struct device *dev,
-				       struct device_attribute *attr,
-				       const char *buf, size_t count)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)shost->hostdata;
-	struct afu *afu = cfg->afu;
-	int rc;
-	u32 lun_mode;
-
-	rc = kstrtouint(buf, 10, &lun_mode);
-	if (!rc && (lun_mode < 5) && (lun_mode != afu->internal_lun)) {
-		afu->internal_lun = lun_mode;
-		cxlflash_afu_reset(cfg);
-		scsi_scan_host(cfg->host);
-	}
-
-	return count;
-}
-
-/**
- * cxlflash_show_ioctl_version() - presents the current ioctl version of the host
- * @dev:	Generic device associated with the host.
- * @attr:	Device attribute representing the ioctl version.
- * @buf:	Buffer of length PAGE_SIZE to report back the ioctl version.
- *
- * Return: The size of the ASCII string returned in @buf.
- */
-static ssize_t cxlflash_show_ioctl_version(struct device *dev,
-					   struct device_attribute *attr,
-					   char *buf)
-{
-	return scnprintf(buf, PAGE_SIZE, "%u\n", DK_CXLFLASH_VERSION_0);
-}
-
-/**
- * cxlflash_show_dev_mode() - presents the current mode of the device
- * @dev:	Generic device associated with the device.
- * @attr:	Device attribute representing the device mode.
- * @buf:	Buffer of length PAGE_SIZE to report back the dev mode in ASCII.
- *
- * Return: The size of the ASCII string returned in @buf.
- */
-static ssize_t cxlflash_show_dev_mode(struct device *dev,
-				      struct device_attribute *attr, char *buf)
-{
-	struct scsi_device *sdev = to_scsi_device(dev);
-
-	return snprintf(buf, PAGE_SIZE, "%s\n",
-			sdev->hostdata ? "superpipe" : "legacy");
-}
-
-/**
  * cxlflash_wait_for_pci_err_recovery() - wait for error recovery during probe
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  */
 static void cxlflash_wait_for_pci_err_recovery(struct cxlflash_cfg *cfg)
 {
 	struct pci_dev *pdev = cfg->dev;
 
 	if (pci_channel_offline(pdev))
-		wait_event_timeout(cfg->limbo_waitq,
+		wait_event_timeout(cfg->reset_waitq,
 				   !pci_channel_offline(pdev),
 				   CXLFLASH_PCI_ERROR_RECOVERY_TIMEOUT);
 }
 
-/*
- * Host attributes
- */
-static DEVICE_ATTR(port0, S_IRUGO, cxlflash_show_port_status, NULL);
-static DEVICE_ATTR(port1, S_IRUGO, cxlflash_show_port_status, NULL);
-static DEVICE_ATTR(lun_mode, S_IRUGO | S_IWUSR, cxlflash_show_lun_mode,
-		   cxlflash_store_lun_mode);
-static DEVICE_ATTR(ioctl_version, S_IRUGO, cxlflash_show_ioctl_version, NULL);
-
-static struct device_attribute *cxlflash_host_attrs[] = {
-	&dev_attr_port0,
-	&dev_attr_port1,
-	&dev_attr_lun_mode,
-	&dev_attr_ioctl_version,
-	NULL
-};
-
-/*
- * Device attributes
- */
-static DEVICE_ATTR(mode, S_IRUGO, cxlflash_show_dev_mode, NULL);
-
-static struct device_attribute *cxlflash_dev_attrs[] = {
-	&dev_attr_mode,
-	NULL
-};
-
-/*
- * Host template
- */
-static struct scsi_host_template driver_template = {
-	.module = THIS_MODULE,
-	.name = CXLFLASH_ADAPTER_NAME,
-	.info = cxlflash_driver_info,
-	.ioctl = cxlflash_ioctl,
-	.proc_name = CXLFLASH_NAME,
-	.queuecommand = cxlflash_queuecommand,
-	.eh_device_reset_handler = cxlflash_eh_device_reset_handler,
-	.eh_host_reset_handler = cxlflash_eh_host_reset_handler,
-	.change_queue_depth = cxlflash_change_queue_depth,
-	.cmd_per_lun = 16,
-	.can_queue = CXLFLASH_MAX_CMDS,
-	.this_id = -1,
-	.sg_tablesize = SG_NONE,	/* No scatter gather support. */
-	.max_sectors = CXLFLASH_MAX_SECTORS,
-	.use_clustering = ENABLE_CLUSTERING,
-	.shost_attrs = cxlflash_host_attrs,
-	.sdev_attrs = cxlflash_dev_attrs,
-};
-
-/*
- * Device dependent values
- */
-static struct dev_dependent_vals dev_corsa_vals = { CXLFLASH_MAX_SECTORS };
-
-/*
- * PCI device binding table
- */
-static struct pci_device_id cxlflash_pci_table[] = {
-	{PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CORSA,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, (kernel_ulong_t)&dev_corsa_vals},
-	{}
-};
-
-MODULE_DEVICE_TABLE(pci, cxlflash_pci_table);
-
 /**
  * free_mem() - free memory associated with the AFU
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  */
 static void free_mem(struct cxlflash_cfg *cfg)
 {
@@ -800,7 +629,7 @@ static void free_mem(struct cxlflash_cfg *cfg)
 
 /**
  * stop_afu() - stops the AFU command timers and unmaps the MMIO space
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  *
  * Safe to call with AFU in a partially allocated/initialized state.
  */
@@ -814,7 +643,7 @@ static void stop_afu(struct cxlflash_cfg *cfg)
 			complete(&afu->cmd[i].cevent);
 
 		if (likely(afu->afu_map)) {
-			cxl_psa_unmap((void *)afu->afu_map);
+			cxl_psa_unmap((void __iomem *)afu->afu_map);
 			afu->afu_map = NULL;
 		}
 	}
@@ -822,7 +651,7 @@ static void stop_afu(struct cxlflash_cfg *cfg)
 
 /**
  * term_mc() - terminates the master context
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  * @level:	Depth of allocation, where to begin waterfall tear down.
  *
  * Safe to call with AFU/MC in partially allocated/initialized state.
@@ -831,9 +660,10 @@ static void term_mc(struct cxlflash_cfg *cfg, enum undo_level level)
 {
 	int rc = 0;
 	struct afu *afu = cfg->afu;
+	struct device *dev = &cfg->dev->dev;
 
 	if (!afu || !cfg->mcctx) {
-		pr_err("%s: returning from term_mc with NULL afu or MC\n",
+		dev_err(dev, "%s: returning from term_mc with NULL afu or MC\n",
 		       __func__);
 		return;
 	}
@@ -857,7 +687,7 @@ static void term_mc(struct cxlflash_cfg *cfg, enum undo_level level)
 
 /**
  * term_afu() - terminates the AFU
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  *
  * Safe to call with AFU/MC in partially allocated/initialized state.
  */
@@ -885,11 +715,12 @@ static void cxlflash_remove(struct pci_dev *pdev)
 	/* If a Task Management Function is active, wait for it to complete
 	 * before continuing with remove.
 	 */
-	spin_lock_irqsave(&cfg->tmf_waitq.lock, lock_flags);
+	spin_lock_irqsave(&cfg->tmf_slock, lock_flags);
 	if (cfg->tmf_active)
-		wait_event_interruptible_locked_irq(cfg->tmf_waitq,
-						    !cfg->tmf_active);
-	spin_unlock_irqrestore(&cfg->tmf_waitq.lock, lock_flags);
+		wait_event_interruptible_lock_irq(cfg->tmf_waitq,
+						  !cfg->tmf_active,
+						  cfg->tmf_slock);
+	spin_unlock_irqrestore(&cfg->tmf_slock, lock_flags);
 
 	cfg->state = STATE_FAILTERM;
 	cxlflash_stop_term_user_contexts(cfg);
@@ -898,16 +729,16 @@ static void cxlflash_remove(struct pci_dev *pdev)
 	case INIT_STATE_SCSI:
 		cxlflash_term_local_luns(cfg);
 		scsi_remove_host(cfg->host);
-		scsi_host_put(cfg->host);
-		/* Fall through */
+		/* fall through */
 	case INIT_STATE_AFU:
 		term_afu(cfg);
+		cancel_work_sync(&cfg->work_q);
 	case INIT_STATE_PCI:
 		pci_release_regions(cfg->dev);
 		pci_disable_device(pdev);
 	case INIT_STATE_NONE:
-		flush_work(&cfg->work_q);
 		free_mem(cfg);
+		scsi_host_put(cfg->host);
 		break;
 	}
 
@@ -916,7 +747,7 @@ static void cxlflash_remove(struct pci_dev *pdev)
 
 /**
  * alloc_mem() - allocates the AFU and its command pool
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  *
  * A partially allocated state remains on failure.
  *
@@ -929,15 +760,14 @@ static int alloc_mem(struct cxlflash_cfg *cfg)
 	int rc = 0;
 	int i;
 	char *buf = NULL;
+	struct device *dev = &cfg->dev->dev;
 
-	/* This allocation is about 12K, i.e. only 1 64k page
-	 * and upto 4 4k pages
-	 */
+	/* AFU is ~12k, i.e. only one 64k page or up to four 4k pages */
 	cfg->afu = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
 					    get_order(sizeof(struct afu)));
 	if (unlikely(!cfg->afu)) {
-		pr_err("%s: cannot get %d free pages\n",
-		       __func__, get_order(sizeof(struct afu)));
+		dev_err(dev, "%s: cannot get %d free pages\n",
+			__func__, get_order(sizeof(struct afu)));
 		rc = -ENOMEM;
 		goto out;
 	}
@@ -948,7 +778,8 @@ static int alloc_mem(struct cxlflash_cfg *cfg)
 		if (!((u64)buf & (PAGE_SIZE - 1))) {
 			buf = (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
 			if (unlikely(!buf)) {
-				pr_err("%s: Allocate command buffers fail!\n",
+				dev_err(dev,
+					"%s: Allocate command buffers fail!\n",
 				       __func__);
 				rc = -ENOMEM;
 				free_mem(cfg);
@@ -967,12 +798,9 @@ out:
 
 /**
  * init_pci() - initializes the host as a PCI device
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  *
- * Return:
- *	0 on success
- *	-EIO on unable to communicate with device
- *	A return code from the PCI sub-routines
+ * Return: 0 on success, -errno on failure
  */
 static int init_pci(struct cxlflash_cfg *cfg)
 {
@@ -1052,11 +880,9 @@ out_release_regions:
 
 /**
  * init_scsi() - adds the host to the SCSI stack and kicks off host scan
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  *
- * Return:
- *	0 on success
- *	A return code from adding the host
+ * Return: 0 on success, -errno on failure
  */
 static int init_scsi(struct cxlflash_cfg *cfg)
 {
@@ -1085,7 +911,7 @@ out:
  * that the FC link layer has synced, completed the handshaking process, and
  * is ready for login to start.
  */
-static void set_port_online(u64 *fc_regs)
+static void set_port_online(__be64 __iomem *fc_regs)
 {
 	u64 cmdcfg;
 
@@ -1101,7 +927,7 @@ static void set_port_online(u64 *fc_regs)
  *
  * The provided MMIO region must be mapped prior to call.
  */
-static void set_port_offline(u64 *fc_regs)
+static void set_port_offline(__be64 __iomem *fc_regs)
 {
 	u64 cmdcfg;
 
@@ -1125,7 +951,7 @@ static void set_port_offline(u64 *fc_regs)
  *	FALSE (0) when the specified port fails to come online after timeout
  *	-EINVAL when @delay_us is less than 1000
  */
-static int wait_port_online(u64 *fc_regs, u32 delay_us, u32 nretry)
+static int wait_port_online(__be64 __iomem *fc_regs, u32 delay_us, u32 nretry)
 {
 	u64 status;
 
@@ -1156,7 +982,7 @@ static int wait_port_online(u64 *fc_regs, u32 delay_us, u32 nretry)
  *	FALSE (0) when the specified port fails to go offline after timeout
  *	-EINVAL when @delay_us is less than 1000
  */
-static int wait_port_offline(u64 *fc_regs, u32 delay_us, u32 nretry)
+static int wait_port_offline(__be64 __iomem *fc_regs, u32 delay_us, u32 nretry)
 {
 	u64 status;
 
@@ -1191,9 +1017,10 @@ static int wait_port_offline(u64 *fc_regs, u32 delay_us, u32 nretry)
  *	0 when the WWPN is successfully written and the port comes back online
  *	-1 when the port fails to go offline or come back up online
  */
-static int afu_set_wwpn(struct afu *afu, int port, u64 *fc_regs, u64 wwpn)
+static int afu_set_wwpn(struct afu *afu, int port, __be64 __iomem *fc_regs,
+			u64 wwpn)
 {
-	int ret = 0;
+	int rc = 0;
 
 	set_port_offline(fc_regs);
 
@@ -1201,33 +1028,26 @@ static int afu_set_wwpn(struct afu *afu, int port, u64 *fc_regs, u64 wwpn)
 			       FC_PORT_STATUS_RETRY_CNT)) {
 		pr_debug("%s: wait on port %d to go offline timed out\n",
 			 __func__, port);
-		ret = -1; /* but continue on to leave the port back online */
+		rc = -1; /* but continue on to leave the port back online */
 	}
 
-	if (ret == 0)
+	if (rc == 0)
 		writeq_be(wwpn, &fc_regs[FC_PNAME / 8]);
 
+	/* Always return success after programming WWPN */
+	rc = 0;
+
 	set_port_online(fc_regs);
 
 	if (!wait_port_online(fc_regs, FC_PORT_STATUS_RETRY_INTERVAL_US,
 			      FC_PORT_STATUS_RETRY_CNT)) {
-		pr_debug("%s: wait on port %d to go online timed out\n",
-			 __func__, port);
-		ret = -1;
-
-		/*
-		 * Override for internal lun!!!
-		 */
-		if (afu->internal_lun) {
-			pr_debug("%s: Overriding port %d online timeout!!!\n",
-				 __func__, port);
-			ret = 0;
-		}
+		pr_err("%s: wait on port %d to go online timed out\n",
+		       __func__, port);
 	}
 
-	pr_debug("%s: returning rc=%d\n", __func__, ret);
+	pr_debug("%s: returning rc=%d\n", __func__, rc);
 
-	return ret;
+	return rc;
 }
 
 /**
@@ -1243,7 +1063,7 @@ static int afu_set_wwpn(struct afu *afu, int port, u64 *fc_regs, u64 wwpn)
  * the alternate port exclusively while the reset takes place.
  * failure to come online is overridden.
  */
-static void afu_link_reset(struct afu *afu, int port, u64 *fc_regs)
+static void afu_link_reset(struct afu *afu, int port, __be64 __iomem *fc_regs)
 {
 	u64 port_sel;
 
@@ -1280,19 +1100,19 @@ static const struct asyc_intr_info ainfo[] = {
 	{SISL_ASTATUS_FC0_OTHER, "other error", 0, CLR_FC_ERROR | LINK_RESET},
 	{SISL_ASTATUS_FC0_LOGO, "target initiated LOGO", 0, 0},
 	{SISL_ASTATUS_FC0_CRC_T, "CRC threshold exceeded", 0, LINK_RESET},
-	{SISL_ASTATUS_FC0_LOGI_R, "login timed out, retrying", 0, 0},
+	{SISL_ASTATUS_FC0_LOGI_R, "login timed out, retrying", 0, LINK_RESET},
 	{SISL_ASTATUS_FC0_LOGI_F, "login failed", 0, CLR_FC_ERROR},
-	{SISL_ASTATUS_FC0_LOGI_S, "login succeeded", 0, 0},
+	{SISL_ASTATUS_FC0_LOGI_S, "login succeeded", 0, SCAN_HOST},
 	{SISL_ASTATUS_FC0_LINK_DN, "link down", 0, 0},
-	{SISL_ASTATUS_FC0_LINK_UP, "link up", 0, 0},
+	{SISL_ASTATUS_FC0_LINK_UP, "link up", 0, SCAN_HOST},
 	{SISL_ASTATUS_FC1_OTHER, "other error", 1, CLR_FC_ERROR | LINK_RESET},
 	{SISL_ASTATUS_FC1_LOGO, "target initiated LOGO", 1, 0},
 	{SISL_ASTATUS_FC1_CRC_T, "CRC threshold exceeded", 1, LINK_RESET},
 	{SISL_ASTATUS_FC1_LOGI_R, "login timed out, retrying", 1, 0},
 	{SISL_ASTATUS_FC1_LOGI_F, "login failed", 1, CLR_FC_ERROR},
-	{SISL_ASTATUS_FC1_LOGI_S, "login succeeded", 1, 0},
+	{SISL_ASTATUS_FC1_LOGI_S, "login succeeded", 1, SCAN_HOST},
 	{SISL_ASTATUS_FC1_LINK_DN, "link down", 1, 0},
-	{SISL_ASTATUS_FC1_LINK_UP, "link up", 1, 0},
+	{SISL_ASTATUS_FC1_LINK_UP, "link up", 1, SCAN_HOST},
 	{0x0, "", 0, 0}		/* terminator */
 };
 
@@ -1454,47 +1274,46 @@ static irqreturn_t cxlflash_rrq_irq(int irq, void *data)
 static irqreturn_t cxlflash_async_err_irq(int irq, void *data)
 {
 	struct afu *afu = (struct afu *)data;
-	struct cxlflash_cfg *cfg;
+	struct cxlflash_cfg *cfg = afu->parent;
+	struct device *dev = &cfg->dev->dev;
 	u64 reg_unmasked;
 	const struct asyc_intr_info *info;
-	struct sisl_global_map *global = &afu->afu_map->global;
+	struct sisl_global_map __iomem *global = &afu->afu_map->global;
 	u64 reg;
 	u8 port;
 	int i;
 
-	cfg = afu->parent;
-
 	reg = readq_be(&global->regs.aintr_status);
 	reg_unmasked = (reg & SISL_ASTATUS_UNMASK);
 
 	if (reg_unmasked == 0) {
-		pr_err("%s: spurious interrupt, aintr_status 0x%016llX\n",
-		       __func__, reg);
+		dev_err(dev, "%s: spurious interrupt, aintr_status 0x%016llX\n",
+			__func__, reg);
 		goto out;
 	}
 
-	/* it is OK to clear AFU status before FC_ERROR */
+	/* FYI, it is 'okay' to clear AFU status before FC_ERROR */
 	writeq_be(reg_unmasked, &global->regs.aintr_clear);
 
-	/* check each bit that is on */
+	/* Check each bit that is on */
 	for (i = 0; reg_unmasked; i++, reg_unmasked = (reg_unmasked >> 1)) {
 		info = find_ainfo(1ULL << i);
-		if ((reg_unmasked & 0x1) || !info)
+		if (((reg_unmasked & 0x1) == 0) || !info)
 			continue;
 
 		port = info->port;
 
-		pr_err("%s: FC Port %d -> %s, fc_status 0x%08llX\n",
-		       __func__, port, info->desc,
+		dev_err(dev, "%s: FC Port %d -> %s, fc_status 0x%08llX\n",
+			__func__, port, info->desc,
 		       readq_be(&global->fc_regs[port][FC_STATUS / 8]));
 
 		/*
-		 * do link reset first, some OTHER errors will set FC_ERROR
+		 * Do link reset first, some OTHER errors will set FC_ERROR
 		 * again if cleared before or w/o a reset
 		 */
 		if (info->action & LINK_RESET) {
-			pr_err("%s: FC Port %d: resetting link\n",
-			       __func__, port);
+			dev_err(dev, "%s: FC Port %d: resetting link\n",
+				__func__, port);
 			cfg->lr_state = LINK_RESET_REQUIRED;
 			cfg->lr_port = port;
 			schedule_work(&cfg->work_q);
@@ -1504,26 +1323,31 @@ static irqreturn_t cxlflash_async_err_irq(int irq, void *data)
 			reg = readq_be(&global->fc_regs[port][FC_ERROR / 8]);
 
 			/*
-			 * since all errors are unmasked, FC_ERROR and FC_ERRCAP
+			 * Since all errors are unmasked, FC_ERROR and FC_ERRCAP
 			 * should be the same and tracing one is sufficient.
 			 */
 
-			pr_err("%s: fc %d: clearing fc_error 0x%08llX\n",
-			       __func__, port, reg);
+			dev_err(dev, "%s: fc %d: clearing fc_error 0x%08llX\n",
+				__func__, port, reg);
 
 			writeq_be(reg, &global->fc_regs[port][FC_ERROR / 8]);
 			writeq_be(0, &global->fc_regs[port][FC_ERRCAP / 8]);
 		}
+
+		if (info->action & SCAN_HOST) {
+			atomic_inc(&cfg->scan_host_needed);
+			schedule_work(&cfg->work_q);
+		}
 	}
 
 out:
-	pr_debug("%s: returning rc=%d, afu=%p\n", __func__, IRQ_HANDLED, afu);
+	dev_dbg(dev, "%s: returning IRQ_HANDLED, afu=%p\n", __func__, afu);
 	return IRQ_HANDLED;
 }
 
 /**
  * start_context() - starts the master context
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  *
  * Return: A success or failure value from CXL services.
  */
@@ -1541,12 +1365,10 @@ static int start_context(struct cxlflash_cfg *cfg)
 
 /**
  * read_vpd() - obtains the WWPNs from VPD
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  * @wwpn:	Array of size NUM_FC_PORTS to pass back WWPNs
  *
- * Return:
- *	0 on success
- *	-ENODEV when VPD or WWPN keywords not found
+ * Return: 0 on success, -errno on failure
  */
 static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
 {
@@ -1561,7 +1383,7 @@ static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
 	/* Get the VPD data from the device */
 	vpd_size = pci_read_vpd(dev, 0, sizeof(vpd_data), vpd_data);
 	if (unlikely(vpd_size <= 0)) {
-		pr_err("%s: Unable to read VPD (size = %ld)\n",
+		dev_err(&dev->dev, "%s: Unable to read VPD (size = %ld)\n",
 		       __func__, vpd_size);
 		rc = -ENODEV;
 		goto out;
@@ -1571,7 +1393,8 @@ static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
 	ro_start = pci_vpd_find_tag(vpd_data, 0, vpd_size,
 				    PCI_VPD_LRDT_RO_DATA);
 	if (unlikely(ro_start < 0)) {
-		pr_err("%s: VPD Read-only data not found\n", __func__);
+		dev_err(&dev->dev, "%s: VPD Read-only data not found\n",
+			__func__);
 		rc = -ENODEV;
 		goto out;
 	}
@@ -1600,8 +1423,8 @@ static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
 
 		i = pci_vpd_find_info_keyword(vpd_data, i, j, wwpn_vpd_tags[k]);
 		if (unlikely(i < 0)) {
-			pr_err("%s: Port %d WWPN not found in VPD\n",
-			       __func__, k);
+			dev_err(&dev->dev, "%s: Port %d WWPN not found "
+				"in VPD\n", __func__, k);
 			rc = -ENODEV;
 			goto out;
 		}
@@ -1609,7 +1432,8 @@ static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
 		j = pci_vpd_info_field_size(&vpd_data[i]);
 		i += PCI_VPD_INFO_FLD_HDR_SIZE;
 		if (unlikely((i + j > vpd_size) || (j != WWPN_LEN))) {
-			pr_err("%s: Port %d WWPN incomplete or VPD corrupt\n",
+			dev_err(&dev->dev, "%s: Port %d WWPN incomplete or "
+				"VPD corrupt\n",
 			       __func__, k);
 			rc = -ENODEV;
 			goto out;
@@ -1618,8 +1442,8 @@ static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
 		memcpy(tmp_buf, &vpd_data[i], WWPN_LEN);
 		rc = kstrtoul(tmp_buf, WWPN_LEN, (ulong *)&wwpn[k]);
 		if (unlikely(rc)) {
-			pr_err("%s: Fail to convert port %d WWPN to integer\n",
-			       __func__, k);
+			dev_err(&dev->dev, "%s: Fail to convert port %d WWPN "
+				"to integer\n", __func__, k);
 			rc = -ENODEV;
 			goto out;
 		}
@@ -1631,91 +1455,36 @@ out:
 }
 
 /**
- * cxlflash_context_reset() - timeout handler for AFU commands
- * @cmd:	AFU command that timed out.
- *
- * Sends a reset to the AFU.
- */
-void cxlflash_context_reset(struct afu_cmd *cmd)
-{
-	int nretry = 0;
-	u64 rrin = 0x1;
-	u64 room = 0;
-	struct afu *afu = cmd->parent;
-	ulong lock_flags;
-
-	pr_debug("%s: cmd=%p\n", __func__, cmd);
-
-	spin_lock_irqsave(&cmd->slock, lock_flags);
-
-	/* Already completed? */
-	if (cmd->sa.host_use_b[0] & B_DONE) {
-		spin_unlock_irqrestore(&cmd->slock, lock_flags);
-		return;
-	}
-
-	cmd->sa.host_use_b[0] |= (B_DONE | B_ERROR | B_TIMEOUT);
-	spin_unlock_irqrestore(&cmd->slock, lock_flags);
-
-	/*
-	 * We really want to send this reset at all costs, so spread
-	 * out wait time on successive retries for available room.
-	 */
-	do {
-		room = readq_be(&afu->host_map->cmd_room);
-		atomic64_set(&afu->room, room);
-		if (room)
-			goto write_rrin;
-		udelay(nretry);
-	} while (nretry++ < MC_ROOM_RETRY_CNT);
-
-	pr_err("%s: no cmd_room to send reset\n", __func__);
-	return;
-
-write_rrin:
-	nretry = 0;
-	writeq_be(rrin, &afu->host_map->ioarrin);
-	do {
-		rrin = readq_be(&afu->host_map->ioarrin);
-		if (rrin != 0x1)
-			break;
-		/* Double delay each time */
-		udelay(2 ^ nretry);
-	} while (nretry++ < MC_ROOM_RETRY_CNT);
-}
-
-/**
  * init_pcr() - initialize the provisioning and control registers
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  *
  * Also sets up fast access to the mapped registers and initializes AFU
  * command fields that never change.
  */
-void init_pcr(struct cxlflash_cfg *cfg)
+static void init_pcr(struct cxlflash_cfg *cfg)
 {
 	struct afu *afu = cfg->afu;
-	struct sisl_ctrl_map *ctrl_map;
+	struct sisl_ctrl_map __iomem *ctrl_map;
 	int i;
 
 	for (i = 0; i < MAX_CONTEXT; i++) {
 		ctrl_map = &afu->afu_map->ctrls[i].ctrl;
-		/* disrupt any clients that could be running */
-		/* e. g. clients that survived a master restart */
+		/* Disrupt any clients that could be running */
+		/* e.g. clients that survived a master restart */
 		writeq_be(0, &ctrl_map->rht_start);
 		writeq_be(0, &ctrl_map->rht_cnt_id);
 		writeq_be(0, &ctrl_map->ctx_cap);
 	}
 
-	/* copy frequently used fields into afu */
+	/* Copy frequently used fields into afu */
 	afu->ctx_hndl = (u16) cxl_process_element(cfg->mcctx);
-	/* ctx_hndl is 16 bits in CAIA */
 	afu->host_map = &afu->afu_map->hosts[afu->ctx_hndl].host;
 	afu->ctrl_map = &afu->afu_map->ctrls[afu->ctx_hndl].ctrl;
 
 	/* Program the Endian Control for the master context */
 	writeq_be(SISL_ENDIAN_CTRL, &afu->host_map->endian_ctrl);
 
-	/* initialize cmd fields that never change */
+	/* Initialize cmd fields that never change */
 	for (i = 0; i < CXLFLASH_NUM_CMDS; i++) {
 		afu->cmd[i].rcb.ctx_id = afu->ctx_hndl;
 		afu->cmd[i].rcb.msi = SISL_MSI_RRQ_UPDATED;
@@ -1725,11 +1494,12 @@ void init_pcr(struct cxlflash_cfg *cfg)
 
 /**
  * init_global() - initialize AFU global registers
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  */
-int init_global(struct cxlflash_cfg *cfg)
+static int init_global(struct cxlflash_cfg *cfg)
 {
 	struct afu *afu = cfg->afu;
+	struct device *dev = &cfg->dev->dev;
 	u64 wwpn[NUM_FC_PORTS];	/* wwpn of AFU ports */
 	int i = 0, num_ports = 0;
 	int rc = 0;
@@ -1737,13 +1507,13 @@ int init_global(struct cxlflash_cfg *cfg)
 
 	rc = read_vpd(cfg, &wwpn[0]);
 	if (rc) {
-		pr_err("%s: could not read vpd rc=%d\n", __func__, rc);
+		dev_err(dev, "%s: could not read vpd rc=%d\n", __func__, rc);
 		goto out;
 	}
 
 	pr_debug("%s: wwpn0=0x%llX wwpn1=0x%llX\n", __func__, wwpn[0], wwpn[1]);
 
-	/* set up RRQ in AFU for master issued cmds */
+	/* Set up RRQ in AFU for master issued cmds */
 	writeq_be((u64) afu->hrrq_start, &afu->host_map->rrq_start);
 	writeq_be((u64) afu->hrrq_end, &afu->host_map->rrq_end);
 
@@ -1756,9 +1526,9 @@ int init_global(struct cxlflash_cfg *cfg)
 	/* checker on if dual afu */
 	writeq_be(reg, &afu->afu_map->global.regs.afu_config);
 
-	/* global port select: select either port */
+	/* Global port select: select either port */
 	if (afu->internal_lun) {
-		/* only use port 0 */
+		/* Only use port 0 */
 		writeq_be(PORT0, &afu->afu_map->global.regs.afu_port_sel);
 		num_ports = NUM_FC_PORTS - 1;
 	} else {
@@ -1767,20 +1537,20 @@ int init_global(struct cxlflash_cfg *cfg)
 	}
 
 	for (i = 0; i < num_ports; i++) {
-		/* unmask all errors (but they are still masked at AFU) */
+		/* Unmask all errors (but they are still masked at AFU) */
 		writeq_be(0, &afu->afu_map->global.fc_regs[i][FC_ERRMSK / 8]);
-		/* clear CRC error cnt & set a threshold */
+		/* Clear CRC error cnt & set a threshold */
 		(void)readq_be(&afu->afu_map->global.
 			       fc_regs[i][FC_CNT_CRCERR / 8]);
 		writeq_be(MC_CRC_THRESH, &afu->afu_map->global.fc_regs[i]
 			  [FC_CRC_THRESH / 8]);
 
-		/* set WWPNs. If already programmed, wwpn[i] is 0 */
+		/* Set WWPNs. If already programmed, wwpn[i] is 0 */
 		if (wwpn[i] != 0 &&
 		    afu_set_wwpn(afu, i,
 				 &afu->afu_map->global.fc_regs[i][0],
 				 wwpn[i])) {
-			pr_err("%s: failed to set WWPN on port %d\n",
+			dev_err(dev, "%s: failed to set WWPN on port %d\n",
 			       __func__, i);
 			rc = -EIO;
 			goto out;
@@ -1789,18 +1559,17 @@ int init_global(struct cxlflash_cfg *cfg)
 		 * offline/online transitions and a PLOGI
 		 */
 		msleep(100);
-
 	}
 
-	/* set up master's own CTX_CAP to allow real mode, host translation */
-	/* tbls, afu cmds and read/write GSCSI cmds. */
+	/* Set up master's own CTX_CAP to allow real mode, host translation */
+	/* tables, afu cmds and read/write GSCSI cmds. */
 	/* First, unlock ctx_cap write by reading mbox */
 	(void)readq_be(&afu->ctrl_map->mbox_r);	/* unlock ctx_cap */
 	writeq_be((SISL_CTX_CAP_REAL_MODE | SISL_CTX_CAP_HOST_XLATE |
 		   SISL_CTX_CAP_READ_CMD | SISL_CTX_CAP_WRITE_CMD |
 		   SISL_CTX_CAP_AFU_CMD | SISL_CTX_CAP_GSCSI_CMD),
 		  &afu->ctrl_map->ctx_cap);
-	/* init heartbeat */
+	/* Initialize heartbeat */
 	afu->hb = readq_be(&afu->afu_map->global.regs.afu_hb);
 
 out:
@@ -1809,7 +1578,7 @@ out:
 
 /**
  * start_afu() - initializes and starts the AFU
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  */
 static int start_afu(struct cxlflash_cfg *cfg)
 {
@@ -1829,7 +1598,10 @@ static int start_afu(struct cxlflash_cfg *cfg)
 
 	init_pcr(cfg);
 
-	/* initialize RRQ pointers */
+	/* After an AFU reset, RRQ entries are stale, clear them */
+	memset(&afu->rrq_entry, 0, sizeof(afu->rrq_entry));
+
+	/* Initialize RRQ pointers */
 	afu->hrrq_start = &afu->rrq_entry[0];
 	afu->hrrq_end = &afu->rrq_entry[NUM_RRQ_ENTRY - 1];
 	afu->hrrq_curr = afu->hrrq_start;
@@ -1843,12 +1615,9 @@ static int start_afu(struct cxlflash_cfg *cfg)
 
 /**
  * init_mc() - create and register as the master context
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  *
- * Return:
- *	0 on success
- *	-ENOMEM when unable to obtain a context from CXL services
- *	A failure value from CXL services.
+ * Return: 0 on success, -errno on failure
  */
 static int init_mc(struct cxlflash_cfg *cfg)
 {
@@ -1932,15 +1701,12 @@ out:
 
 /**
  * init_afu() - setup as master context and start AFU
- * @cxlflash:	Internal structure associated with the host.
+ * @cfg:	Internal structure associated with the host.
  *
  * This routine is a higher level of control for configuring the
  * AFU on probe and reset paths.
  *
- * Return:
- *	0 on success
- *	-ENOMEM when unable to map the AFU MMIO space
- *	A failure value from internal services.
+ * Return: 0 on success, -errno on failure
  */
 static int init_afu(struct cxlflash_cfg *cfg)
 {
@@ -1955,36 +1721,38 @@ static int init_afu(struct cxlflash_cfg *cfg)
 	if (rc) {
 		dev_err(dev, "%s: call to init_mc failed, rc=%d!\n",
 			__func__, rc);
-		goto err1;
+		goto out;
 	}
 
-	/* Map the entire MMIO space of the AFU.
-	 */
+	/* Map the entire MMIO space of the AFU */
 	afu->afu_map = cxl_psa_map(cfg->mcctx);
 	if (!afu->afu_map) {
-		rc = -ENOMEM;
-		term_mc(cfg, UNDO_START);
 		dev_err(dev, "%s: call to cxl_psa_map failed!\n", __func__);
+		rc = -ENOMEM;
 		goto err1;
 	}
 
-	/* don't byte reverse on reading afu_version, else the string form */
-	/*     will be backwards */
-	reg = afu->afu_map->global.regs.afu_version;
-	memcpy(afu->version, &reg, 8);
+	/* No byte reverse on reading afu_version or string will be backwards */
+	reg = readq(&afu->afu_map->global.regs.afu_version);
+	memcpy(afu->version, &reg, sizeof(reg));
 	afu->interface_version =
 	    readq_be(&afu->afu_map->global.regs.interface_version);
-	pr_debug("%s: afu version %s, interface version 0x%llX\n",
-		 __func__, afu->version, afu->interface_version);
+	if ((afu->interface_version + 1) == 0) {
+		pr_err("Back level AFU, please upgrade. AFU version %s "
+		       "interface version 0x%llx\n", afu->version,
+		       afu->interface_version);
+		rc = -EINVAL;
+		goto err2;
+	}
+
+	pr_debug("%s: afu version %s, interface version 0x%llX\n", __func__,
+		 afu->version, afu->interface_version);
 
 	rc = start_afu(cfg);
 	if (rc) {
 		dev_err(dev, "%s: call to start_afu failed, rc=%d!\n",
 			__func__, rc);
-		term_mc(cfg, UNDO_START);
-		cxl_psa_unmap((void *)afu->afu_map);
-		afu->afu_map = NULL;
-		goto err1;
+		goto err2;
 	}
 
 	afu_err_intr_init(cfg->afu);
@@ -1992,98 +1760,19 @@ static int init_afu(struct cxlflash_cfg *cfg)
 
 	/* Restore the LUN mappings */
 	cxlflash_restore_luntable(cfg);
-err1:
-	pr_debug("%s: returning rc=%d\n", __func__, rc);
-	return rc;
-}
-
-/**
- * cxlflash_send_cmd() - sends an AFU command
- * @afu:	AFU associated with the host.
- * @cmd:	AFU command to send.
- *
- * Return:
- *	0 on success
- *	-1 on failure
- */
-int cxlflash_send_cmd(struct afu *afu, struct afu_cmd *cmd)
-{
-	struct cxlflash_cfg *cfg = afu->parent;
-	int nretry = 0;
-	int rc = 0;
-	u64 room;
-	long newval;
-
-	/*
-	 * This routine is used by critical users such an AFU sync and to
-	 * send a task management function (TMF). Thus we want to retry a
-	 * bit before returning an error. To avoid the performance penalty
-	 * of MMIO, we spread the update of 'room' over multiple commands.
-	 */
-retry:
-	newval = atomic64_dec_if_positive(&afu->room);
-	if (!newval) {
-		do {
-			room = readq_be(&afu->host_map->cmd_room);
-			atomic64_set(&afu->room, room);
-			if (room)
-				goto write_ioarrin;
-			udelay(nretry);
-		} while (nretry++ < MC_ROOM_RETRY_CNT);
-
-		pr_err("%s: no cmd_room to send 0x%X\n",
-		       __func__, cmd->rcb.cdb[0]);
-
-		goto no_room;
-	} else if (unlikely(newval < 0)) {
-		/* This should be rare. i.e. Only if two threads race and
-		 * decrement before the MMIO read is done. In this case
-		 * just benefit from the other thread having updated
-		 * afu->room.
-		 */
-		if (nretry++ < MC_ROOM_RETRY_CNT) {
-			udelay(nretry);
-			goto retry;
-		}
-
-		goto no_room;
-	}
-
-write_ioarrin:
-	writeq_be((u64)&cmd->rcb, &afu->host_map->ioarrin);
 out:
-	pr_debug("%s: cmd=%p len=%d ea=%p rc=%d\n", __func__, cmd,
-		 cmd->rcb.data_len, (void *)cmd->rcb.data_ea, rc);
+	pr_debug("%s: returning rc=%d\n", __func__, rc);
 	return rc;
 
-no_room:
-	afu->read_room = true;
-	schedule_work(&cfg->work_q);
-	rc = SCSI_MLQUEUE_HOST_BUSY;
+err2:
+	cxl_psa_unmap((void __iomem *)afu->afu_map);
+	afu->afu_map = NULL;
+err1:
+	term_mc(cfg, UNDO_START);
 	goto out;
 }
 
 /**
- * cxlflash_wait_resp() - polls for a response or timeout to a sent AFU command
- * @afu:	AFU associated with the host.
- * @cmd:	AFU command that was sent.
- */
-void cxlflash_wait_resp(struct afu *afu, struct afu_cmd *cmd)
-{
-	ulong timeout = jiffies + (cmd->rcb.timeout * 2 * HZ);
-
-	timeout = wait_for_completion_timeout(&cmd->cevent, timeout);
-	if (!timeout)
-		cxlflash_context_reset(cmd);
-
-	if (unlikely(cmd->sa.ioasc != 0))
-		pr_err("%s: CMD 0x%X failed, IOASC: flags 0x%X, afu_rc 0x%X, "
-		       "scsi_rc 0x%X, fc_rc 0x%X\n", __func__, cmd->rcb.cdb[0],
-		       cmd->sa.rc.flags, cmd->sa.rc.afu_rc, cmd->sa.rc.scsi_rc,
-		       cmd->sa.rc.fc_rc);
-}
-
-/**
  * cxlflash_afu_sync() - builds and sends an AFU sync command
  * @afu:	AFU associated with the host.
  * @ctx_hndl_u:	Identifies context requesting sync.
@@ -2091,7 +1780,7 @@ void cxlflash_wait_resp(struct afu *afu, struct afu_cmd *cmd)
  * @mode:	Type of sync to issue (lightweight, heavyweight, global).
  *
  * The AFU can only take 1 sync command at a time. This routine enforces this
- * limitation by using a mutex to provide exlusive access to the AFU during
+ * limitation by using a mutex to provide exclusive access to the AFU during
  * the sync. This design point requires calling threads to not be on interrupt
  * context due to the possibility of sleeping during concurrent sync operations.
  *
@@ -2109,6 +1798,7 @@ int cxlflash_afu_sync(struct afu *afu, ctx_hndl_t ctx_hndl_u,
 		      res_hndl_t res_hndl_u, u8 mode)
 {
 	struct cxlflash_cfg *cfg = afu->parent;
+	struct device *dev = &cfg->dev->dev;
 	struct afu_cmd *cmd = NULL;
 	int rc = 0;
 	int retry_cnt = 0;
@@ -2121,13 +1811,13 @@ int cxlflash_afu_sync(struct afu *afu, ctx_hndl_t ctx_hndl_u,
 
 	mutex_lock(&sync_active);
 retry:
-	cmd = cxlflash_cmd_checkout(afu);
+	cmd = cmd_checkout(afu);
 	if (unlikely(!cmd)) {
 		retry_cnt++;
 		udelay(1000 * retry_cnt);
 		if (retry_cnt < MC_RETRY_CNT)
 			goto retry;
-		pr_err("%s: could not get a free command\n", __func__);
+		dev_err(dev, "%s: could not get a free command\n", __func__);
 		rc = -1;
 		goto out;
 	}
@@ -2147,36 +1837,34 @@ retry:
 	cmd->rcb.cdb[1] = mode;
 
 	/* The cdb is aligned, no unaligned accessors required */
-	*((u16 *)&cmd->rcb.cdb[2]) = swab16(ctx_hndl_u);
-	*((u32 *)&cmd->rcb.cdb[4]) = swab32(res_hndl_u);
+	*((__be16 *)&cmd->rcb.cdb[2]) = cpu_to_be16(ctx_hndl_u);
+	*((__be32 *)&cmd->rcb.cdb[4]) = cpu_to_be32(res_hndl_u);
 
-	rc = cxlflash_send_cmd(afu, cmd);
+	rc = send_cmd(afu, cmd);
 	if (unlikely(rc))
 		goto out;
 
-	cxlflash_wait_resp(afu, cmd);
+	wait_resp(afu, cmd);
 
-	/* set on timeout */
+	/* Set on timeout */
 	if (unlikely((cmd->sa.ioasc != 0) ||
 		     (cmd->sa.host_use_b[0] & B_ERROR)))
 		rc = -1;
 out:
 	mutex_unlock(&sync_active);
 	if (cmd)
-		cxlflash_cmd_checkin(cmd);
+		cmd_checkin(cmd);
 	pr_debug("%s: returning rc=%d\n", __func__, rc);
 	return rc;
 }
 
 /**
- * cxlflash_afu_reset() - resets the AFU
- * @cxlflash:	Internal structure associated with the host.
+ * afu_reset() - resets the AFU
+ * @cfg:	Internal structure associated with the host.
  *
- * Return:
- *	0 on success
- *	A failure value from internal services.
+ * Return: 0 on success, -errno on failure
  */
-int cxlflash_afu_reset(struct cxlflash_cfg *cfg)
+static int afu_reset(struct cxlflash_cfg *cfg)
 {
 	int rc = 0;
 	/* Stop the context before the reset. Since the context is
@@ -2192,6 +1880,413 @@ int cxlflash_afu_reset(struct cxlflash_cfg *cfg)
 }
 
 /**
+ * cxlflash_eh_device_reset_handler() - reset a single LUN
+ * @scp:	SCSI command to send.
+ *
+ * Return:
+ *	SUCCESS as defined in scsi/scsi.h
+ *	FAILED as defined in scsi/scsi.h
+ */
+static int cxlflash_eh_device_reset_handler(struct scsi_cmnd *scp)
+{
+	int rc = SUCCESS;
+	struct Scsi_Host *host = scp->device->host;
+	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)host->hostdata;
+	struct afu *afu = cfg->afu;
+	int rcr = 0;
+
+	pr_debug("%s: (scp=%p) %d/%d/%d/%llu "
+		 "cdb=(%08X-%08X-%08X-%08X)\n", __func__, scp,
+		 host->host_no, scp->device->channel,
+		 scp->device->id, scp->device->lun,
+		 get_unaligned_be32(&((u32 *)scp->cmnd)[0]),
+		 get_unaligned_be32(&((u32 *)scp->cmnd)[1]),
+		 get_unaligned_be32(&((u32 *)scp->cmnd)[2]),
+		 get_unaligned_be32(&((u32 *)scp->cmnd)[3]));
+
+retry:
+	switch (cfg->state) {
+	case STATE_NORMAL:
+		rcr = send_tmf(afu, scp, TMF_LUN_RESET);
+		if (unlikely(rcr))
+			rc = FAILED;
+		break;
+	case STATE_RESET:
+		wait_event(cfg->reset_waitq, cfg->state != STATE_RESET);
+		goto retry;
+	default:
+		rc = FAILED;
+		break;
+	}
+
+	pr_debug("%s: returning rc=%d\n", __func__, rc);
+	return rc;
+}
+
+/**
+ * cxlflash_eh_host_reset_handler() - reset the host adapter
+ * @scp:	SCSI command from stack identifying host.
+ *
+ * Return:
+ *	SUCCESS as defined in scsi/scsi.h
+ *	FAILED as defined in scsi/scsi.h
+ */
+static int cxlflash_eh_host_reset_handler(struct scsi_cmnd *scp)
+{
+	int rc = SUCCESS;
+	int rcr = 0;
+	struct Scsi_Host *host = scp->device->host;
+	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)host->hostdata;
+
+	pr_debug("%s: (scp=%p) %d/%d/%d/%llu "
+		 "cdb=(%08X-%08X-%08X-%08X)\n", __func__, scp,
+		 host->host_no, scp->device->channel,
+		 scp->device->id, scp->device->lun,
+		 get_unaligned_be32(&((u32 *)scp->cmnd)[0]),
+		 get_unaligned_be32(&((u32 *)scp->cmnd)[1]),
+		 get_unaligned_be32(&((u32 *)scp->cmnd)[2]),
+		 get_unaligned_be32(&((u32 *)scp->cmnd)[3]));
+
+	switch (cfg->state) {
+	case STATE_NORMAL:
+		cfg->state = STATE_RESET;
+		cxlflash_mark_contexts_error(cfg);
+		rcr = afu_reset(cfg);
+		if (rcr) {
+			rc = FAILED;
+			cfg->state = STATE_FAILTERM;
+		} else
+			cfg->state = STATE_NORMAL;
+		wake_up_all(&cfg->reset_waitq);
+		break;
+	case STATE_RESET:
+		wait_event(cfg->reset_waitq, cfg->state != STATE_RESET);
+		if (cfg->state == STATE_NORMAL)
+			break;
+		/* fall through */
+	default:
+		rc = FAILED;
+		break;
+	}
+
+	pr_debug("%s: returning rc=%d\n", __func__, rc);
+	return rc;
+}
+
+/**
+ * cxlflash_change_queue_depth() - change the queue depth for the device
+ * @sdev:	SCSI device destined for queue depth change.
+ * @qdepth:	Requested queue depth value to set.
+ *
+ * The requested queue depth is capped to the maximum supported value.
+ *
+ * Return: The actual queue depth set.
+ */
+static int cxlflash_change_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+
+	if (qdepth > CXLFLASH_MAX_CMDS_PER_LUN)
+		qdepth = CXLFLASH_MAX_CMDS_PER_LUN;
+
+	scsi_change_queue_depth(sdev, qdepth);
+	return sdev->queue_depth;
+}
+
+/**
+ * cxlflash_show_port_status() - queries and presents the current port status
+ * @port:	Desired port for status reporting.
+ * @afu:	AFU owning the specified port.
+ * @buf:	Buffer of length PAGE_SIZE to report back port status in ASCII.
+ *
+ * Return: The size of the ASCII string returned in @buf.
+ */
+static ssize_t cxlflash_show_port_status(u32 port, struct afu *afu, char *buf)
+{
+	char *disp_status;
+	u64 status;
+	__be64 __iomem *fc_regs;
+
+	if (port >= NUM_FC_PORTS)
+		return 0;
+
+	fc_regs = &afu->afu_map->global.fc_regs[port][0];
+	status = readq_be(&fc_regs[FC_MTIP_STATUS / 8]);
+	status &= FC_MTIP_STATUS_MASK;
+
+	if (status == FC_MTIP_STATUS_ONLINE)
+		disp_status = "online";
+	else if (status == FC_MTIP_STATUS_OFFLINE)
+		disp_status = "offline";
+	else
+		disp_status = "unknown";
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", disp_status);
+}
+
+/**
+ * port0_show() - queries and presents the current status of port 0
+ * @dev:	Generic device associated with the host owning the port.
+ * @attr:	Device attribute representing the port.
+ * @buf:	Buffer of length PAGE_SIZE to report back port status in ASCII.
+ *
+ * Return: The size of the ASCII string returned in @buf.
+ */
+static ssize_t port0_show(struct device *dev,
+			  struct device_attribute *attr,
+			  char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)shost->hostdata;
+	struct afu *afu = cfg->afu;
+
+	return cxlflash_show_port_status(0, afu, buf);
+}
+
+/**
+ * port1_show() - queries and presents the current status of port 1
+ * @dev:	Generic device associated with the host owning the port.
+ * @attr:	Device attribute representing the port.
+ * @buf:	Buffer of length PAGE_SIZE to report back port status in ASCII.
+ *
+ * Return: The size of the ASCII string returned in @buf.
+ */
+static ssize_t port1_show(struct device *dev,
+			  struct device_attribute *attr,
+			  char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)shost->hostdata;
+	struct afu *afu = cfg->afu;
+
+	return cxlflash_show_port_status(1, afu, buf);
+}
+
+/**
+ * lun_mode_show() - presents the current LUN mode of the host
+ * @dev:	Generic device associated with the host.
+ * @attr:	Device attribute representing the LUN mode.
+ * @buf:	Buffer of length PAGE_SIZE to report back the LUN mode in ASCII.
+ *
+ * Return: The size of the ASCII string returned in @buf.
+ */
+static ssize_t lun_mode_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)shost->hostdata;
+	struct afu *afu = cfg->afu;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", afu->internal_lun);
+}
+
+/**
+ * lun_mode_store() - sets the LUN mode of the host
+ * @dev:	Generic device associated with the host.
+ * @attr:	Device attribute representing the LUN mode.
+ * @buf:	Buffer of length PAGE_SIZE containing the LUN mode in ASCII.
+ * @count:	Length of data resizing in @buf.
+ *
+ * The CXL Flash AFU supports a dummy LUN mode where the external
+ * links and storage are not required. Space on the FPGA is used
+ * to create 1 or 2 small LUNs which are presented to the system
+ * as if they were a normal storage device. This feature is useful
+ * during development and also provides manufacturing with a way
+ * to test the AFU without an actual device.
+ *
+ * 0 = external LUN[s] (default)
+ * 1 = internal LUN (1 x 64K, 512B blocks, id 0)
+ * 2 = internal LUN (1 x 64K, 4K blocks, id 0)
+ * 3 = internal LUN (2 x 32K, 512B blocks, ids 0,1)
+ * 4 = internal LUN (2 x 32K, 4K blocks, ids 0,1)
+ *
+ * Return: The size of the ASCII string returned in @buf.
+ */
+static ssize_t lun_mode_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)shost->hostdata;
+	struct afu *afu = cfg->afu;
+	int rc;
+	u32 lun_mode;
+
+	rc = kstrtouint(buf, 10, &lun_mode);
+	if (!rc && (lun_mode < 5) && (lun_mode != afu->internal_lun)) {
+		afu->internal_lun = lun_mode;
+		afu_reset(cfg);
+		scsi_scan_host(cfg->host);
+	}
+
+	return count;
+}
+
+/**
+ * ioctl_version_show() - presents the current ioctl version of the host
+ * @dev:	Generic device associated with the host.
+ * @attr:	Device attribute representing the ioctl version.
+ * @buf:	Buffer of length PAGE_SIZE to report back the ioctl version.
+ *
+ * Return: The size of the ASCII string returned in @buf.
+ */
+static ssize_t ioctl_version_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	return scnprintf(buf, PAGE_SIZE, "%u\n", DK_CXLFLASH_VERSION_0);
+}
+
+/**
+ * cxlflash_show_port_lun_table() - queries and presents the port LUN table
+ * @port:	Desired port for status reporting.
+ * @afu:	AFU owning the specified port.
+ * @buf:	Buffer of length PAGE_SIZE to report back port status in ASCII.
+ *
+ * Return: The size of the ASCII string returned in @buf.
+ */
+static ssize_t cxlflash_show_port_lun_table(u32 port,
+					    struct afu *afu,
+					    char *buf)
+{
+	int i;
+	ssize_t bytes = 0;
+	__be64 __iomem *fc_port;
+
+	if (port >= NUM_FC_PORTS)
+		return 0;
+
+	fc_port = &afu->afu_map->global.fc_port[port][0];
+
+	for (i = 0; i < CXLFLASH_NUM_VLUNS; i++)
+		bytes += scnprintf(buf + bytes, PAGE_SIZE - bytes,
+				   "%03d: %016llX\n", i, readq_be(&fc_port[i]));
+	return bytes;
+}
+
+/**
+ * port0_lun_table_show() - presents the current LUN table of port 0
+ * @dev:	Generic device associated with the host owning the port.
+ * @attr:	Device attribute representing the port.
+ * @buf:	Buffer of length PAGE_SIZE to report back port status in ASCII.
+ *
+ * Return: The size of the ASCII string returned in @buf.
+ */
+static ssize_t port0_lun_table_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)shost->hostdata;
+	struct afu *afu = cfg->afu;
+
+	return cxlflash_show_port_lun_table(0, afu, buf);
+}
+
+/**
+ * port1_lun_table_show() - presents the current LUN table of port 1
+ * @dev:	Generic device associated with the host owning the port.
+ * @attr:	Device attribute representing the port.
+ * @buf:	Buffer of length PAGE_SIZE to report back port status in ASCII.
+ *
+ * Return: The size of the ASCII string returned in @buf.
+ */
+static ssize_t port1_lun_table_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)shost->hostdata;
+	struct afu *afu = cfg->afu;
+
+	return cxlflash_show_port_lun_table(1, afu, buf);
+}
+
+/**
+ * mode_show() - presents the current mode of the device
+ * @dev:	Generic device associated with the device.
+ * @attr:	Device attribute representing the device mode.
+ * @buf:	Buffer of length PAGE_SIZE to report back the dev mode in ASCII.
+ *
+ * Return: The size of the ASCII string returned in @buf.
+ */
+static ssize_t mode_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n",
+			 sdev->hostdata ? "superpipe" : "legacy");
+}
+
+/*
+ * Host attributes
+ */
+static DEVICE_ATTR_RO(port0);
+static DEVICE_ATTR_RO(port1);
+static DEVICE_ATTR_RW(lun_mode);
+static DEVICE_ATTR_RO(ioctl_version);
+static DEVICE_ATTR_RO(port0_lun_table);
+static DEVICE_ATTR_RO(port1_lun_table);
+
+static struct device_attribute *cxlflash_host_attrs[] = {
+	&dev_attr_port0,
+	&dev_attr_port1,
+	&dev_attr_lun_mode,
+	&dev_attr_ioctl_version,
+	&dev_attr_port0_lun_table,
+	&dev_attr_port1_lun_table,
+	NULL
+};
+
+/*
+ * Device attributes
+ */
+static DEVICE_ATTR_RO(mode);
+
+static struct device_attribute *cxlflash_dev_attrs[] = {
+	&dev_attr_mode,
+	NULL
+};
+
+/*
+ * Host template
+ */
+static struct scsi_host_template driver_template = {
+	.module = THIS_MODULE,
+	.name = CXLFLASH_ADAPTER_NAME,
+	.info = cxlflash_driver_info,
+	.ioctl = cxlflash_ioctl,
+	.proc_name = CXLFLASH_NAME,
+	.queuecommand = cxlflash_queuecommand,
+	.eh_device_reset_handler = cxlflash_eh_device_reset_handler,
+	.eh_host_reset_handler = cxlflash_eh_host_reset_handler,
+	.change_queue_depth = cxlflash_change_queue_depth,
+	.cmd_per_lun = 16,
+	.can_queue = CXLFLASH_MAX_CMDS,
+	.this_id = -1,
+	.sg_tablesize = SG_NONE,	/* No scatter gather support */
+	.max_sectors = CXLFLASH_MAX_SECTORS,
+	.use_clustering = ENABLE_CLUSTERING,
+	.shost_attrs = cxlflash_host_attrs,
+	.sdev_attrs = cxlflash_dev_attrs,
+};
+
+/*
+ * Device dependent values
+ */
+static struct dev_dependent_vals dev_corsa_vals = { CXLFLASH_MAX_SECTORS };
+
+/*
+ * PCI device binding table
+ */
+static struct pci_device_id cxlflash_pci_table[] = {
+	{PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CORSA,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, (kernel_ulong_t)&dev_corsa_vals},
+	{}
+};
+
+MODULE_DEVICE_TABLE(pci, cxlflash_pci_table);
+
+/**
  * cxlflash_worker_thread() - work thread handler for the AFU
  * @work:	Work structure contained within cxlflash associated with host.
  *
@@ -2199,12 +2294,14 @@ int cxlflash_afu_reset(struct cxlflash_cfg *cfg)
  * - Link reset which cannot be performed on interrupt context due to
  * blocking up to a few seconds
  * - Read AFU command room
+ * - Rescan the host
  */
 static void cxlflash_worker_thread(struct work_struct *work)
 {
 	struct cxlflash_cfg *cfg = container_of(work, struct cxlflash_cfg,
 						work_q);
 	struct afu *afu = cfg->afu;
+	struct device *dev = &cfg->dev->dev;
 	int port;
 	ulong lock_flags;
 
@@ -2218,15 +2315,15 @@ static void cxlflash_worker_thread(struct work_struct *work)
 	if (cfg->lr_state == LINK_RESET_REQUIRED) {
 		port = cfg->lr_port;
 		if (port < 0)
-			pr_err("%s: invalid port index %d\n", __func__, port);
+			dev_err(dev, "%s: invalid port index %d\n",
+				__func__, port);
 		else {
 			spin_unlock_irqrestore(cfg->host->host_lock,
 					       lock_flags);
 
 			/* The reset can block... */
 			afu_link_reset(afu, port,
-				       &afu->afu_map->
-				       global.fc_regs[port][0]);
+				       &afu->afu_map->global.fc_regs[port][0]);
 			spin_lock_irqsave(cfg->host->host_lock, lock_flags);
 		}
 
@@ -2239,6 +2336,9 @@ static void cxlflash_worker_thread(struct work_struct *work)
 	}
 
 	spin_unlock_irqrestore(cfg->host->host_lock, lock_flags);
+
+	if (atomic_dec_if_positive(&cfg->scan_host_needed) >= 0)
+		scsi_scan_host(cfg->host);
 }
 
 /**
@@ -2246,7 +2346,7 @@ static void cxlflash_worker_thread(struct work_struct *work)
  * @pdev:	PCI device associated with the host.
  * @dev_id:	PCI device id associated with device.
  *
- * Return: 0 on success / non-zero on failure
+ * Return: 0 on success, -errno on failure
  */
 static int cxlflash_probe(struct pci_dev *pdev,
 			  const struct pci_device_id *dev_id)
@@ -2281,14 +2381,16 @@ static int cxlflash_probe(struct pci_dev *pdev,
 	cfg->host = host;
 	rc = alloc_mem(cfg);
 	if (rc) {
-		dev_err(&pdev->dev, "%s: call to scsi_host_alloc failed!\n",
+		dev_err(&pdev->dev, "%s: call to alloc_mem failed!\n",
 			__func__);
 		rc = -ENOMEM;
+		scsi_host_put(cfg->host);
 		goto out;
 	}
 
 	cfg->init_state = INIT_STATE_NONE;
 	cfg->dev = pdev;
+	cfg->cxl_fops = cxlflash_cxl_fops;
 
 	/*
 	 * The promoted LUNs move to the top of the LUN table. The rest stay
@@ -2301,28 +2403,30 @@ static int cxlflash_probe(struct pci_dev *pdev,
 	cfg->last_lun_index[1] = CXLFLASH_NUM_VLUNS/2 - 1;
 
 	cfg->dev_id = (struct pci_device_id *)dev_id;
-	cfg->mcctx = NULL;
 
 	init_waitqueue_head(&cfg->tmf_waitq);
-	init_waitqueue_head(&cfg->limbo_waitq);
+	init_waitqueue_head(&cfg->reset_waitq);
 
 	INIT_WORK(&cfg->work_q, cxlflash_worker_thread);
 	cfg->lr_state = LINK_RESET_INVALID;
 	cfg->lr_port = -1;
+	spin_lock_init(&cfg->tmf_slock);
 	mutex_init(&cfg->ctx_tbl_list_mutex);
 	mutex_init(&cfg->ctx_recovery_mutex);
+	init_rwsem(&cfg->ioctl_rwsem);
 	INIT_LIST_HEAD(&cfg->ctx_err_recovery);
 	INIT_LIST_HEAD(&cfg->lluns);
 
 	pci_set_drvdata(pdev, cfg);
 
-	/* Use the special service provided to look up the physical
+	/*
+	 * Use the special service provided to look up the physical
 	 * PCI device, since we are called on the probe of the virtual
 	 * PCI host bus (vphb)
 	 */
 	phys_dev = cxl_get_phys_dev(pdev);
 	if (!dev_is_pci(phys_dev)) {
-		pr_err("%s: not a pci dev\n", __func__);
+		dev_err(&pdev->dev, "%s: not a pci dev\n", __func__);
 		rc = -ENODEV;
 		goto out_remove;
 	}
@@ -2346,7 +2450,6 @@ static int cxlflash_probe(struct pci_dev *pdev,
 	}
 	cfg->init_state = INIT_STATE_AFU;
 
-
 	rc = init_scsi(cfg);
 	if (rc) {
 		dev_err(&pdev->dev, "%s: call to init_scsi "
@@ -2365,6 +2468,19 @@ out_remove:
 }
 
 /**
+ * drain_ioctls() - wait until all currently executing ioctls have completed
+ * @cfg:	Internal structure associated with the host.
+ *
+ * Obtain write access to read/write semaphore that wraps ioctl
+ * handling to 'drain' ioctls currently executing.
+ */
+static void drain_ioctls(struct cxlflash_cfg *cfg)
+{
+	down_write(&cfg->ioctl_rwsem);
+	up_write(&cfg->ioctl_rwsem);
+}
+
+/**
  * cxlflash_pci_error_detected() - called when a PCI error is detected
  * @pdev:	PCI device struct.
  * @state:	PCI channel state.
@@ -2382,21 +2498,19 @@ static pci_ers_result_t cxlflash_pci_error_detected(struct pci_dev *pdev,
 
 	switch (state) {
 	case pci_channel_io_frozen:
-		cfg->state = STATE_LIMBO;
-
-		/* Turn off legacy I/O */
+		cfg->state = STATE_RESET;
 		scsi_block_requests(cfg->host);
+		drain_ioctls(cfg);
 		rc = cxlflash_mark_contexts_error(cfg);
 		if (unlikely(rc))
 			dev_err(dev, "%s: Failed to mark user contexts!(%d)\n",
 				__func__, rc);
 		term_mc(cfg, UNDO_START);
 		stop_afu(cfg);
-
 		return PCI_ERS_RESULT_NEED_RESET;
 	case pci_channel_io_perm_failure:
 		cfg->state = STATE_FAILTERM;
-		wake_up_all(&cfg->limbo_waitq);
+		wake_up_all(&cfg->reset_waitq);
 		scsi_unblock_requests(cfg->host);
 		return PCI_ERS_RESULT_DISCONNECT;
 	default:
@@ -2443,7 +2557,7 @@ static void cxlflash_pci_resume(struct pci_dev *pdev)
 	dev_dbg(dev, "%s: pdev=%p\n", __func__, pdev);
 
 	cfg->state = STATE_NORMAL;
-	wake_up_all(&cfg->limbo_waitq);
+	wake_up_all(&cfg->reset_waitq);
 	scsi_unblock_requests(cfg->host);
 }
 
@@ -2467,7 +2581,7 @@ static struct pci_driver cxlflash_driver = {
 /**
  * init_cxlflash() - module entry point
  *
- * Return: 0 on success / non-zero on failure
+ * Return: 0 on success, -errno on failure
  */
 static int __init init_cxlflash(void)
 {
diff --git a/drivers/scsi/cxlflash/main.h b/drivers/scsi/cxlflash/main.h
index cf0e80938..60324566c 100644
--- a/drivers/scsi/cxlflash/main.h
+++ b/drivers/scsi/cxlflash/main.h
@@ -99,6 +99,7 @@ struct asyc_intr_info {
 	u8 action;
 #define CLR_FC_ERROR	0x01
 #define LINK_RESET	0x02
+#define SCAN_HOST	0x04
 };
 
 #ifndef CONFIG_CXL_EEH
diff --git a/drivers/scsi/cxlflash/sislite.h b/drivers/scsi/cxlflash/sislite.h
index 63bf394fe..0b3366f5e 100644
--- a/drivers/scsi/cxlflash/sislite.h
+++ b/drivers/scsi/cxlflash/sislite.h
@@ -146,7 +146,7 @@ struct sisl_rc {
 #define SISL_FC_RC_ABORTFAIL	0x59	/* pending abort completed w/fail */
 #define SISL_FC_RC_RESID	0x5A	/* ioasa underrun/overrun flags set */
 #define SISL_FC_RC_RESIDERR	0x5B	/* actual data len does not match SCSI
-					   reported len, possbly due to dropped
+					   reported len, possibly due to dropped
 					   frames */
 #define SISL_FC_RC_TGTABORT	0x5C	/* command aborted by target */
 };
@@ -258,7 +258,7 @@ struct sisl_host_map {
 	__be64 rrq_start;	/* start & end are both inclusive */
 	__be64 rrq_end;		/* write sequence: start followed by end */
 	__be64 cmd_room;
-	__be64 ctx_ctrl;	/* least signiifcant byte or b56:63 is LISN# */
+	__be64 ctx_ctrl;	/* least significant byte or b56:63 is LISN# */
 	__be64 mbox_w;		/* restricted use */
 };
 
@@ -290,7 +290,7 @@ struct sisl_global_regs {
 #define SISL_ASTATUS_FC0_LOGO    0x4000ULL /* b49, target sent FLOGI/PLOGI/LOGO
 						   while logged in */
 #define SISL_ASTATUS_FC0_CRC_T   0x2000ULL /* b50, CRC threshold exceeded */
-#define SISL_ASTATUS_FC0_LOGI_R  0x1000ULL /* b51, login state mechine timed out
+#define SISL_ASTATUS_FC0_LOGI_R  0x1000ULL /* b51, login state machine timed out
 						   and retrying */
 #define SISL_ASTATUS_FC0_LOGI_F  0x0800ULL /* b52, login failed,
 					      FC_ERROR[19:0] */
@@ -340,7 +340,7 @@ struct sisl_global_regs {
 #define SISL_AFUCONF_MBOX_CLR_READ     0x0010ULL
 	__be64 afu_config;
 	__be64 rsvd[0xf8];
-	__be64 afu_version;
+	__le64 afu_version;
 	__be64 interface_version;
 };
 
diff --git a/drivers/scsi/cxlflash/superpipe.c b/drivers/scsi/cxlflash/superpipe.c
index f1b62cea7..cac2e6a50 100644
--- a/drivers/scsi/cxlflash/superpipe.c
+++ b/drivers/scsi/cxlflash/superpipe.c
@@ -76,7 +76,7 @@ void cxlflash_free_errpage(void)
  *
  * When the host needs to go down, all users must be quiesced and their
  * memory freed. This is accomplished by putting the contexts in error
- * state which will notify the user and let them 'drive' the tear-down.
+ * state which will notify the user and let them 'drive' the tear down.
  * Meanwhile, this routine camps until all user contexts have been removed.
  */
 void cxlflash_stop_term_user_contexts(struct cxlflash_cfg *cfg)
@@ -100,7 +100,7 @@ void cxlflash_stop_term_user_contexts(struct cxlflash_cfg *cfg)
 
 		dev_dbg(dev, "%s: Wait for user contexts to quiesce...\n",
 			__func__);
-		wake_up_all(&cfg->limbo_waitq);
+		wake_up_all(&cfg->reset_waitq);
 		ssleep(1);
 	}
 }
@@ -162,10 +162,7 @@ struct ctx_info *get_context(struct cxlflash_cfg *cfg, u64 rctxid,
 
 	if (likely(ctxid < MAX_CONTEXT)) {
 		while (true) {
-			rc = mutex_lock_interruptible(&cfg->ctx_tbl_list_mutex);
-			if (rc)
-				goto out;
-
+			mutex_lock(&cfg->ctx_tbl_list_mutex);
 			ctxi = cfg->ctx_tbl[ctxid];
 			if (ctxi)
 				if ((file && (ctxi->file != file)) ||
@@ -253,7 +250,7 @@ static int afu_attach(struct cxlflash_cfg *cfg, struct ctx_info *ctxi)
 {
 	struct device *dev = &cfg->dev->dev;
 	struct afu *afu = cfg->afu;
-	struct sisl_ctrl_map *ctrl_map = ctxi->ctrl_map;
+	struct sisl_ctrl_map __iomem *ctrl_map = ctxi->ctrl_map;
 	int rc = 0;
 	u64 val;
 
@@ -283,6 +280,24 @@ out:
  * @sdev:	SCSI device associated with LUN.
  * @lli:	LUN destined for capacity request.
  *
+ * The READ_CAP16 can take quite a while to complete. Should an EEH occur while
+ * in scsi_execute(), the EEH handler will attempt to recover. As part of the
+ * recovery, the handler drains all currently running ioctls, waiting until they
+ * have completed before proceeding with a reset. As this routine is used on the
+ * ioctl path, this can create a condition where the EEH handler becomes stuck,
+ * infinitely waiting for this ioctl thread. To avoid this behavior, temporarily
+ * unmark this thread as an ioctl thread by releasing the ioctl read semaphore.
+ * This will allow the EEH handler to proceed with a recovery while this thread
+ * is still running. Once the scsi_execute() returns, reacquire the ioctl read
+ * semaphore and check the adapter state in case it changed while inside of
+ * scsi_execute(). The state check will wait if the adapter is still being
+ * recovered or return a failure if the recovery failed. In the event that the
+ * adapter reset failed, simply return the failure as the ioctl would be unable
+ * to continue.
+ *
+ * Note that the above puts a requirement on this routine to only be called on
+ * an ioctl thread.
+ *
  * Return: 0 on success, -errno on failure
  */
 static int read_cap16(struct scsi_device *sdev, struct llun_info *lli)
@@ -296,7 +311,7 @@ static int read_cap16(struct scsi_device *sdev, struct llun_info *lli)
 	int rc = 0;
 	int result = 0;
 	int retry_cnt = 0;
-	u32 tout = (MC_DISCOVERY_TIMEOUT * HZ);
+	u32 to = CMD_TIMEOUT * HZ;
 
 retry:
 	cmd_buf = kzalloc(CMD_BUFSIZE, GFP_KERNEL);
@@ -314,8 +329,18 @@ retry:
 	dev_dbg(dev, "%s: %ssending cmd(0x%x)\n", __func__,
 		retry_cnt ? "re" : "", scsi_cmd[0]);
 
+	/* Drop the ioctl read semahpore across lengthy call */
+	up_read(&cfg->ioctl_rwsem);
 	result = scsi_execute(sdev, scsi_cmd, DMA_FROM_DEVICE, cmd_buf,
-			      CMD_BUFSIZE, sense_buf, tout, 5, 0, NULL);
+			      CMD_BUFSIZE, sense_buf, to, CMD_RETRIES, 0, NULL);
+	down_read(&cfg->ioctl_rwsem);
+	rc = check_state(cfg);
+	if (rc) {
+		dev_err(dev, "%s: Failed state! result=0x08%X\n",
+			__func__, result);
+		rc = -ENODEV;
+		goto out;
+	}
 
 	if (driver_byte(result) == DRIVER_SENSE) {
 		result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
@@ -365,8 +390,8 @@ retry:
 	 * as the buffer is allocated on an aligned boundary.
 	 */
 	mutex_lock(&gli->mutex);
-	gli->max_lba = be64_to_cpu(*((u64 *)&cmd_buf[0]));
-	gli->blk_len = be32_to_cpu(*((u32 *)&cmd_buf[8]));
+	gli->max_lba = be64_to_cpu(*((__be64 *)&cmd_buf[0]));
+	gli->blk_len = be32_to_cpu(*((__be32 *)&cmd_buf[8]));
 	mutex_unlock(&gli->mutex);
 
 out:
@@ -712,7 +737,6 @@ static void destroy_context(struct cxlflash_cfg *cfg,
 	kfree(ctxi->rht_needs_ws);
 	kfree(ctxi->rht_lun);
 	kfree(ctxi);
-	atomic_dec_if_positive(&cfg->num_user_contexts);
 }
 
 /**
@@ -737,7 +761,7 @@ static struct ctx_info *create_context(struct cxlflash_cfg *cfg,
 	struct afu *afu = cfg->afu;
 	struct ctx_info *ctxi = NULL;
 	struct llun_info **lli = NULL;
-	bool *ws = NULL;
+	u8 *ws = NULL;
 	struct sisl_rht_entry *rhte;
 
 	ctxi = kzalloc(sizeof(*ctxi), GFP_KERNEL);
@@ -769,7 +793,6 @@ static struct ctx_info *create_context(struct cxlflash_cfg *cfg,
 	INIT_LIST_HEAD(&ctxi->luns);
 	INIT_LIST_HEAD(&ctxi->list); /* initialize for list_empty() */
 
-	atomic_inc(&cfg->num_user_contexts);
 	mutex_lock(&ctxi->mutex);
 out:
 	return ctxi;
@@ -880,6 +903,9 @@ static int _cxlflash_disk_detach(struct scsi_device *sdev,
 			sys_close(lfd);
 	}
 
+	/* Release the sdev reference that bound this LUN to the context */
+	scsi_device_put(sdev);
+
 out:
 	if (put_ctx)
 		put_context(ctxi);
@@ -1161,10 +1187,7 @@ out:
 	return rc;
 }
 
-/*
- * Local fops for adapter file descriptor
- */
-static const struct file_operations cxlflash_cxl_fops = {
+const struct file_operations cxlflash_cxl_fops = {
 	.owner = THIS_MODULE,
 	.mmap = cxlflash_cxl_mmap,
 	.release = cxlflash_cxl_release,
@@ -1211,6 +1234,46 @@ static const struct file_operations null_fops = {
 };
 
 /**
+ * check_state() - checks and responds to the current adapter state
+ * @cfg:	Internal structure associated with the host.
+ *
+ * This routine can block and should only be used on process context.
+ * It assumes that the caller is an ioctl thread and holding the ioctl
+ * read semaphore. This is temporarily let up across the wait to allow
+ * for draining actively running ioctls. Also note that when waking up
+ * from waiting in reset, the state is unknown and must be checked again
+ * before proceeding.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+int check_state(struct cxlflash_cfg *cfg)
+{
+	struct device *dev = &cfg->dev->dev;
+	int rc = 0;
+
+retry:
+	switch (cfg->state) {
+	case STATE_RESET:
+		dev_dbg(dev, "%s: Reset state, going to wait...\n", __func__);
+		up_read(&cfg->ioctl_rwsem);
+		rc = wait_event_interruptible(cfg->reset_waitq,
+					      cfg->state != STATE_RESET);
+		down_read(&cfg->ioctl_rwsem);
+		if (unlikely(rc))
+			break;
+		goto retry;
+	case STATE_FAILTERM:
+		dev_dbg(dev, "%s: Failed/Terminating!\n", __func__);
+		rc = -ENODEV;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+/**
  * cxlflash_disk_attach() - attach a LUN to a context
  * @sdev:	SCSI device associated with LUN.
  * @attach:	Attach ioctl data structure.
@@ -1243,10 +1306,6 @@ static int cxlflash_disk_attach(struct scsi_device *sdev,
 
 	int fd = -1;
 
-	/* On first attach set fileops */
-	if (atomic_read(&cfg->num_user_contexts) == 0)
-		cfg->cxl_fops = cxlflash_cxl_fops;
-
 	if (attach->num_interrupts > 4) {
 		dev_dbg(dev, "%s: Cannot support this many interrupts %llu\n",
 			__func__, attach->num_interrupts);
@@ -1287,11 +1346,17 @@ static int cxlflash_disk_attach(struct scsi_device *sdev,
 			}
 	}
 
+	rc = scsi_device_get(sdev);
+	if (unlikely(rc)) {
+		dev_err(dev, "%s: Unable to get sdev reference!\n", __func__);
+		goto out;
+	}
+
 	lun_access = kzalloc(sizeof(*lun_access), GFP_KERNEL);
 	if (unlikely(!lun_access)) {
 		dev_err(dev, "%s: Unable to allocate lun_access!\n", __func__);
 		rc = -ENOMEM;
-		goto out;
+		goto err0;
 	}
 
 	lun_access->lli = lli;
@@ -1311,21 +1376,21 @@ static int cxlflash_disk_attach(struct scsi_device *sdev,
 		dev_err(dev, "%s: Could not initialize context %p\n",
 			__func__, ctx);
 		rc = -ENODEV;
-		goto err0;
+		goto err1;
 	}
 
 	ctxid = cxl_process_element(ctx);
 	if (unlikely((ctxid > MAX_CONTEXT) || (ctxid < 0))) {
 		dev_err(dev, "%s: ctxid (%d) invalid!\n", __func__, ctxid);
 		rc = -EPERM;
-		goto err1;
+		goto err2;
 	}
 
 	file = cxl_get_fd(ctx, &cfg->cxl_fops, &fd);
 	if (unlikely(fd < 0)) {
 		rc = -ENODEV;
 		dev_err(dev, "%s: Could not get file descriptor\n", __func__);
-		goto err1;
+		goto err2;
 	}
 
 	/* Translate read/write O_* flags from fcntl.h to AFU permission bits */
@@ -1335,7 +1400,7 @@ static int cxlflash_disk_attach(struct scsi_device *sdev,
 	if (unlikely(!ctxi)) {
 		dev_err(dev, "%s: Failed to create context! (%d)\n",
 			__func__, ctxid);
-		goto err2;
+		goto err3;
 	}
 
 	work = &ctxi->work;
@@ -1346,13 +1411,13 @@ static int cxlflash_disk_attach(struct scsi_device *sdev,
 	if (unlikely(rc)) {
 		dev_dbg(dev, "%s: Could not start context rc=%d\n",
 			__func__, rc);
-		goto err3;
+		goto err4;
 	}
 
 	rc = afu_attach(cfg, ctxi);
 	if (unlikely(rc)) {
 		dev_err(dev, "%s: Could not attach AFU rc %d\n", __func__, rc);
-		goto err4;
+		goto err5;
 	}
 
 	/*
@@ -1375,7 +1440,8 @@ out_attach:
 	attach->block_size = gli->blk_len;
 	attach->mmio_size = sizeof(afu->afu_map->hosts[0].harea);
 	attach->last_lba = gli->max_lba;
-	attach->max_xfer = (sdev->host->max_sectors * 512) / gli->blk_len;
+	attach->max_xfer = sdev->host->max_sectors * MAX_SECTOR_UNIT;
+	attach->max_xfer /= gli->blk_len;
 
 out:
 	attach->adap_fd = fd;
@@ -1387,13 +1453,13 @@ out:
 		__func__, ctxid, fd, attach->block_size, rc, attach->last_lba);
 	return rc;
 
-err4:
+err5:
 	cxl_stop_context(ctx);
-err3:
+err4:
 	put_context(ctxi);
 	destroy_context(cfg, ctxi);
 	ctxi = NULL;
-err2:
+err3:
 	/*
 	 * Here, we're overriding the fops with a dummy all-NULL fops because
 	 * fput() calls the release fop, which will cause us to mistakenly
@@ -1405,10 +1471,12 @@ err2:
 	fput(file);
 	put_unused_fd(fd);
 	fd = -1;
-err1:
+err2:
 	cxl_release_context(ctx);
-err0:
+err1:
 	kfree(lun_access);
+err0:
+	scsi_device_put(sdev);
 	goto out;
 }
 
@@ -1511,41 +1579,6 @@ err1:
 }
 
 /**
- * check_state() - checks and responds to the current adapter state
- * @cfg:	Internal structure associated with the host.
- *
- * This routine can block and should only be used on process context.
- * Note that when waking up from waiting in limbo, the state is unknown
- * and must be checked again before proceeding.
- *
- * Return: 0 on success, -errno on failure
- */
-static int check_state(struct cxlflash_cfg *cfg)
-{
-	struct device *dev = &cfg->dev->dev;
-	int rc = 0;
-
-retry:
-	switch (cfg->state) {
-	case STATE_LIMBO:
-		dev_dbg(dev, "%s: Limbo, going to wait...\n", __func__);
-		rc = wait_event_interruptible(cfg->limbo_waitq,
-					      cfg->state != STATE_LIMBO);
-		if (unlikely(rc))
-			break;
-		goto retry;
-	case STATE_FAILTERM:
-		dev_dbg(dev, "%s: Failed/Terminating!\n", __func__);
-		rc = -ENODEV;
-		break;
-	default:
-		break;
-	}
-
-	return rc;
-}
-
-/**
  * cxlflash_afu_recover() - initiates AFU recovery
  * @sdev:	SCSI device associated with LUN.
  * @recover:	Recover ioctl data structure.
@@ -1561,10 +1594,10 @@ retry:
  * quite possible for this routine to act as the kernel's EEH detection
  * source (MMIO read of mbox_r). Because of this, there is a window of
  * time where an EEH might have been detected but not yet 'serviced'
- * (callback invoked, causing the device to enter limbo state). To avoid
+ * (callback invoked, causing the device to enter reset state). To avoid
  * looping in this routine during that window, a 1 second sleep is in place
  * between the time the MMIO failure is detected and the time a wait on the
- * limbo wait queue is attempted via check_state().
+ * reset wait queue is attempted via check_state().
  *
  * Return: 0 on success, -errno on failure
  */
@@ -1634,9 +1667,14 @@ retry_recover:
 	/* Test if in error state */
 	reg = readq_be(&afu->ctrl_map->mbox_r);
 	if (reg == -1) {
-		dev_dbg(dev, "%s: MMIO read fail! Wait for recovery...\n",
-			__func__);
-		mutex_unlock(&ctxi->mutex);
+		dev_dbg(dev, "%s: MMIO fail, wait for recovery.\n", __func__);
+
+		/*
+		 * Before checking the state, put back the context obtained with
+		 * get_context() as it is no longer needed and sleep for a short
+		 * period of time (see prolog notes).
+		 */
+		put_context(ctxi);
 		ctxi = NULL;
 		ssleep(1);
 		rc = check_state(cfg);
@@ -1765,12 +1803,21 @@ static int cxlflash_disk_verify(struct scsi_device *sdev,
 	 * inquiry (i.e. the Unit attention is due to the WWN changing).
 	 */
 	if (verify->hint & DK_CXLFLASH_VERIFY_HINT_SENSE) {
+		/* Can't hold mutex across process_sense/read_cap16,
+		 * since we could have an intervening EEH event.
+		 */
+		ctxi->unavail = true;
+		mutex_unlock(&ctxi->mutex);
 		rc = process_sense(sdev, verify);
 		if (unlikely(rc)) {
 			dev_err(dev, "%s: Failed to validate sense data (%d)\n",
 				__func__, rc);
+			mutex_lock(&ctxi->mutex);
+			ctxi->unavail = false;
 			goto out;
 		}
+		mutex_lock(&ctxi->mutex);
+		ctxi->unavail = false;
 	}
 
 	switch (gli->mode) {
@@ -1955,6 +2002,14 @@ out:
  * @cmd:	IOCTL command.
  * @arg:	Userspace ioctl data structure.
  *
+ * A read/write semaphore is used to implement a 'drain' of currently
+ * running ioctls. The read semaphore is taken at the beginning of each
+ * ioctl thread and released upon concluding execution. Additionally the
+ * semaphore should be released and then reacquired in any ioctl execution
+ * path which will wait for an event to occur that is outside the scope of
+ * the ioctl (i.e. an adapter reset). To drain the ioctls currently running,
+ * a thread simply needs to acquire the write semaphore.
+ *
  * Return: 0 on success, -errno on failure
  */
 int cxlflash_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
@@ -1989,6 +2044,9 @@ int cxlflash_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
 	{sizeof(struct dk_cxlflash_clone), (sioctl)cxlflash_disk_clone},
 	};
 
+	/* Hold read semaphore so we can drain if needed */
+	down_read(&cfg->ioctl_rwsem);
+
 	/* Restrict command set to physical support only for internal LUN */
 	if (afu->internal_lun)
 		switch (cmd) {
@@ -2070,6 +2128,7 @@ int cxlflash_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
 	/* fall through to exit */
 
 cxlflash_ioctl_exit:
+	up_read(&cfg->ioctl_rwsem);
 	if (unlikely(rc && known_ioctl))
 		dev_err(dev, "%s: ioctl %s (%08X) on dev(%d/%d/%d/%llu) "
 			"returned rc %d\n", __func__,
diff --git a/drivers/scsi/cxlflash/superpipe.h b/drivers/scsi/cxlflash/superpipe.h
index d7dc88bc6..bede574bc 100644
--- a/drivers/scsi/cxlflash/superpipe.h
+++ b/drivers/scsi/cxlflash/superpipe.h
@@ -28,7 +28,10 @@ extern struct cxlflash_global global;
 */
 #define MC_CHUNK_SIZE     (1 << MC_RHT_NMASK)	/* in LBAs */
 
-#define MC_DISCOVERY_TIMEOUT 5  /* 5 secs */
+#define CMD_TIMEOUT 30  /* 30 secs */
+#define CMD_RETRIES 5   /* 5 retries for scsi_execute */
+
+#define MAX_SECTOR_UNIT  512 /* max_sector is in 512 byte multiples */
 
 #define CHAN2PORT(_x)	((_x) + 1)
 #define PORT2CHAN(_x)	((_x) - 1)
@@ -60,7 +63,6 @@ struct llun_info {
 	u32 lun_index;		/* Index in the LUN table */
 	u32 host_no;		/* host_no from Scsi_host */
 	u32 port_sel;		/* What port to use for this LUN */
-	bool newly_created;	/* Whether the LUN was just discovered */
 	bool in_table;		/* Whether a LUN table entry was created */
 
 	u8 wwid[16];		/* Keep a duplicate copy here? */
@@ -84,17 +86,17 @@ enum ctx_ctrl {
 	CTX_CTRL_FILE		= (1 << 5)
 };
 
-#define ENCODE_CTXID(_ctx, _id)	(((((u64)_ctx) & 0xFFFFFFFF0) << 28) | _id)
+#define ENCODE_CTXID(_ctx, _id)	(((((u64)_ctx) & 0xFFFFFFFF0ULL) << 28) | _id)
 #define DECODE_CTXID(_val)	(_val & 0xFFFFFFFF)
 
 struct ctx_info {
-	struct sisl_ctrl_map *ctrl_map; /* initialized at startup */
+	struct sisl_ctrl_map __iomem *ctrl_map; /* initialized at startup */
 	struct sisl_rht_entry *rht_start; /* 1 page (req'd for alignment),
 					     alloc/free on attach/detach */
 	u32 rht_out;		/* Number of checked out RHT entries */
 	u32 rht_perms;		/* User-defined permissions for RHT entries */
 	struct llun_info **rht_lun;       /* Mapping of RHT entries to LUNs */
-	bool *rht_needs_ws;	/* User-desired write-same function per RHTE */
+	u8 *rht_needs_ws;	/* User-desired write-same function per RHTE */
 
 	struct cxl_ioctl_start_work work;
 	u64 ctxid;
@@ -144,4 +146,6 @@ void cxlflash_ba_terminate(struct ba_lun *);
 
 int cxlflash_manage_lun(struct scsi_device *, struct dk_cxlflash_manage_lun *);
 
+int check_state(struct cxlflash_cfg *);
+
 #endif /* ifndef _CXLFLASH_SUPERPIPE_H */
diff --git a/drivers/scsi/cxlflash/vlun.c b/drivers/scsi/cxlflash/vlun.c
index 6155cb1d4..a53f583e2 100644
--- a/drivers/scsi/cxlflash/vlun.c
+++ b/drivers/scsi/cxlflash/vlun.c
@@ -132,7 +132,7 @@ static int ba_init(struct ba_lun *ba_lun)
 		return -ENOMEM;
 	}
 
-	/* Pass the allocated lun info as a handle to the user */
+	/* Pass the allocated LUN info as a handle to the user */
 	ba_lun->ba_lun_handle = bali;
 
 	pr_debug("%s: Successfully initialized the LUN: "
@@ -165,7 +165,7 @@ static int find_free_range(u32 low,
 			num_bits = (sizeof(*lam) * BITS_PER_BYTE);
 			bit_pos = find_first_bit(lam, num_bits);
 
-			pr_devel("%s: Found free bit %llX in lun "
+			pr_devel("%s: Found free bit %llX in LUN "
 				 "map entry %llX at bitmap index = %X\n",
 				 __func__, bit_pos, bali->lun_alloc_map[i],
 				 i);
@@ -400,6 +400,24 @@ static int init_vlun(struct llun_info *lli)
  * @lba:	Logical block address to start write same.
  * @nblks:	Number of logical blocks to write same.
  *
+ * The SCSI WRITE_SAME16 can take quite a while to complete. Should an EEH occur
+ * while in scsi_execute(), the EEH handler will attempt to recover. As part of
+ * the recovery, the handler drains all currently running ioctls, waiting until
+ * they have completed before proceeding with a reset. As this routine is used
+ * on the ioctl path, this can create a condition where the EEH handler becomes
+ * stuck, infinitely waiting for this ioctl thread. To avoid this behavior,
+ * temporarily unmark this thread as an ioctl thread by releasing the ioctl read
+ * semaphore. This will allow the EEH handler to proceed with a recovery while
+ * this thread is still running. Once the scsi_execute() returns, reacquire the
+ * ioctl read semaphore and check the adapter state in case it changed while
+ * inside of scsi_execute(). The state check will wait if the adapter is still
+ * being recovered or return a failure if the recovery failed. In the event that
+ * the adapter reset failed, simply return the failure as the ioctl would be
+ * unable to continue.
+ *
+ * Note that the above puts a requirement on this routine to only be called on
+ * an ioctl thread.
+ *
  * Return: 0 on success, -errno on failure
  */
 static int write_same16(struct scsi_device *sdev,
@@ -414,7 +432,7 @@ static int write_same16(struct scsi_device *sdev,
 	int ws_limit = SISLITE_MAX_WS_BLOCKS;
 	u64 offset = lba;
 	int left = nblks;
-	u32 tout = sdev->request_queue->rq_timeout;
+	u32 to = sdev->request_queue->rq_timeout;
 	struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
 	struct device *dev = &cfg->dev->dev;
 
@@ -433,8 +451,20 @@ static int write_same16(struct scsi_device *sdev,
 		put_unaligned_be32(ws_limit < left ? ws_limit : left,
 				   &scsi_cmd[10]);
 
+		/* Drop the ioctl read semahpore across lengthy call */
+		up_read(&cfg->ioctl_rwsem);
 		result = scsi_execute(sdev, scsi_cmd, DMA_TO_DEVICE, cmd_buf,
-				      CMD_BUFSIZE, sense_buf, tout, 5, 0, NULL);
+				      CMD_BUFSIZE, sense_buf, to, CMD_RETRIES,
+				      0, NULL);
+		down_read(&cfg->ioctl_rwsem);
+		rc = check_state(cfg);
+		if (rc) {
+			dev_err(dev, "%s: Failed state! result=0x08%X\n",
+				__func__, result);
+			rc = -ENODEV;
+			goto out;
+		}
+
 		if (result) {
 			dev_err_ratelimited(dev, "%s: command failed for "
 					    "offset %lld result=0x%x\n",
@@ -681,14 +711,14 @@ out:
 }
 
 /**
- * _cxlflash_vlun_resize() - changes the size of a virtual lun
+ * _cxlflash_vlun_resize() - changes the size of a virtual LUN
  * @sdev:	SCSI device associated with LUN owning virtual LUN.
  * @ctxi:	Context owning resources.
  * @resize:	Resize ioctl data structure.
  *
  * On successful return, the user is informed of the new size (in blocks)
- * of the virtual lun in last LBA format. When the size of the virtual
- * lun is zero, the last LBA is reflected as -1. See comment in the
+ * of the virtual LUN in last LBA format. When the size of the virtual
+ * LUN is zero, the last LBA is reflected as -1. See comment in the
  * prologue for _cxlflash_disk_release() regarding AFU syncs and contexts
  * on the error recovery list.
  *
@@ -785,7 +815,7 @@ void cxlflash_restore_luntable(struct cxlflash_cfg *cfg)
 	u32 chan;
 	u32 lind;
 	struct afu *afu = cfg->afu;
-	struct sisl_global_map *agm = &afu->afu_map->global;
+	struct sisl_global_map __iomem *agm = &afu->afu_map->global;
 
 	mutex_lock(&global.mutex);
 
@@ -830,7 +860,7 @@ static int init_luntable(struct cxlflash_cfg *cfg, struct llun_info *lli)
 	u32 lind;
 	int rc = 0;
 	struct afu *afu = cfg->afu;
-	struct sisl_global_map *agm = &afu->afu_map->global;
+	struct sisl_global_map __iomem *agm = &afu->afu_map->global;
 
 	mutex_lock(&global.mutex);
 
@@ -885,8 +915,8 @@ out:
  * @arg:	UVirtual ioctl data structure.
  *
  * On successful return, the user is informed of the resource handle
- * to be used to identify the virtual lun and the size (in blocks) of
- * the virtual lun in last LBA format. When the size of the virtual lun
+ * to be used to identify the virtual LUN and the size (in blocks) of
+ * the virtual LUN in last LBA format. When the size of the virtual LUN
  * is zero, the last LBA is reflected as -1.
  *
  * Return: 0 on success, -errno on failure
@@ -914,16 +944,9 @@ int cxlflash_disk_virtual_open(struct scsi_device *sdev, void *arg)
 
 	pr_debug("%s: ctxid=%llu ls=0x%llx\n", __func__, ctxid, lun_size);
 
+	/* Setup the LUNs block allocator on first call */
 	mutex_lock(&gli->mutex);
 	if (gli->mode == MODE_NONE) {
-		/* Setup the LUN table and block allocator on first call */
-		rc = init_luntable(cfg, lli);
-		if (rc) {
-			dev_err(dev, "%s: call to init_luntable failed "
-				"rc=%d!\n", __func__, rc);
-			goto err0;
-		}
-
 		rc = init_vlun(lli);
 		if (rc) {
 			dev_err(dev, "%s: call to init_vlun failed rc=%d!\n",
@@ -941,6 +964,13 @@ int cxlflash_disk_virtual_open(struct scsi_device *sdev, void *arg)
 	}
 	mutex_unlock(&gli->mutex);
 
+	rc = init_luntable(cfg, lli);
+	if (rc) {
+		dev_err(dev, "%s: call to init_luntable failed rc=%d!\n",
+			__func__, rc);
+		goto err1;
+	}
+
 	ctxi = get_context(cfg, rctxid, lli, 0);
 	if (unlikely(!ctxi)) {
 		dev_err(dev, "%s: Bad context! (%llu)\n", __func__, ctxid);
diff --git a/drivers/scsi/esas2r/esas2r_main.c b/drivers/scsi/esas2r/esas2r_main.c
index 31f8966b2..33581ba43 100644
--- a/drivers/scsi/esas2r/esas2r_main.c
+++ b/drivers/scsi/esas2r/esas2r_main.c
@@ -256,7 +256,6 @@ static struct scsi_host_template driver_template = {
 	.proc_name			= ESAS2R_DRVR_NAME,
 	.change_queue_depth		= scsi_change_queue_depth,
 	.max_sectors			= 0xFFFF,
-	.use_blk_tags			= 1,
 };
 
 int sgl_page_size = 512;
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 065b25df7..71cb05b1c 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -2694,7 +2694,6 @@ struct scsi_host_template scsi_esp_template = {
 	.use_clustering		= ENABLE_CLUSTERING,
 	.max_sectors		= 0xffff,
 	.skip_settle_delay	= 1,
-	.use_blk_tags		= 1,
 };
 EXPORT_SYMBOL(scsi_esp_template);
 
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index d3eb80c46..f4424063b 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -287,7 +287,6 @@ static struct scsi_host_template fcoe_shost_template = {
 	.use_clustering = ENABLE_CLUSTERING,
 	.sg_tablesize = SG_ALL,
 	.max_sectors = 0xffff,
-	.use_blk_tags = 1,
 	.track_queue_depth = 1,
 };
 
@@ -1873,7 +1872,6 @@ static int fcoe_percpu_receive_thread(void *arg)
 
 	set_user_nice(current, MIN_NICE);
 
-retry:
 	while (!kthread_should_stop()) {
 
 		spin_lock_bh(&p->fcoe_rx_list.lock);
@@ -1883,7 +1881,7 @@ retry:
 			set_current_state(TASK_INTERRUPTIBLE);
 			spin_unlock_bh(&p->fcoe_rx_list.lock);
 			schedule();
-			goto retry;
+			continue;
 		}
 
 		spin_unlock_bh(&p->fcoe_rx_list.lock);
diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c
index bf0bbd42e..67669a9e7 100644
--- a/drivers/scsi/fnic/fnic_fcs.c
+++ b/drivers/scsi/fnic/fnic_fcs.c
@@ -939,6 +939,7 @@ int fnic_alloc_rq_frame(struct vnic_rq *rq)
 	struct sk_buff *skb;
 	u16 len;
 	dma_addr_t pa;
+	int r;
 
 	len = FC_FRAME_HEADROOM + FC_MAX_FRAME + FC_FRAME_TAILROOM;
 	skb = dev_alloc_skb(len);
@@ -952,8 +953,19 @@ int fnic_alloc_rq_frame(struct vnic_rq *rq)
 	skb_reset_network_header(skb);
 	skb_put(skb, len);
 	pa = pci_map_single(fnic->pdev, skb->data, len, PCI_DMA_FROMDEVICE);
+
+	r = pci_dma_mapping_error(fnic->pdev, pa);
+	if (r) {
+		printk(KERN_ERR "PCI mapping failed with error %d\n", r);
+		goto free_skb;
+	}
+
 	fnic_queue_rq_desc(rq, skb, pa, len);
 	return 0;
+
+free_skb:
+	kfree_skb(skb);
+	return r;
 }
 
 void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf)
@@ -981,6 +993,7 @@ void fnic_eth_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
 	struct ethhdr *eth_hdr;
 	struct vlan_ethhdr *vlan_hdr;
 	unsigned long flags;
+	int r;
 
 	if (!fnic->vlan_hw_insert) {
 		eth_hdr = (struct ethhdr *)skb_mac_header(skb);
@@ -1003,18 +1016,27 @@ void fnic_eth_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
 
 	pa = pci_map_single(fnic->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
 
-	spin_lock_irqsave(&fnic->wq_lock[0], flags);
-	if (!vnic_wq_desc_avail(wq)) {
-		pci_unmap_single(fnic->pdev, pa, skb->len, PCI_DMA_TODEVICE);
-		spin_unlock_irqrestore(&fnic->wq_lock[0], flags);
-		kfree_skb(skb);
-		return;
+	r = pci_dma_mapping_error(fnic->pdev, pa);
+	if (r) {
+		printk(KERN_ERR "PCI mapping failed with error %d\n", r);
+		goto free_skb;
 	}
 
+	spin_lock_irqsave(&fnic->wq_lock[0], flags);
+	if (!vnic_wq_desc_avail(wq))
+		goto irq_restore;
+
 	fnic_queue_wq_eth_desc(wq, skb, pa, skb->len,
 			       0 /* hw inserts cos value */,
 			       fnic->vlan_id, 1);
 	spin_unlock_irqrestore(&fnic->wq_lock[0], flags);
+	return;
+
+irq_restore:
+	spin_unlock_irqrestore(&fnic->wq_lock[0], flags);
+	pci_unmap_single(fnic->pdev, pa, skb->len, PCI_DMA_TODEVICE);
+free_skb:
+	kfree_skb(skb);
 }
 
 /*
@@ -1071,6 +1093,12 @@ static int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp)
 
 	pa = pci_map_single(fnic->pdev, eth_hdr, tot_len, PCI_DMA_TODEVICE);
 
+	ret = pci_dma_mapping_error(fnic->pdev, pa);
+	if (ret) {
+		printk(KERN_ERR "DMA map failed with error %d\n", ret);
+		goto free_skb_on_err;
+	}
+
 	if ((fnic_fc_trace_set_data(fnic->lport->host->host_no, FNIC_FC_SEND,
 				(char *)eth_hdr, tot_len)) != 0) {
 		printk(KERN_ERR "fnic ctlr frame trace error!!!");
@@ -1082,15 +1110,17 @@ static int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp)
 		pci_unmap_single(fnic->pdev, pa,
 				 tot_len, PCI_DMA_TODEVICE);
 		ret = -1;
-		goto fnic_send_frame_end;
+		goto irq_restore;
 	}
 
 	fnic_queue_wq_desc(wq, skb, pa, tot_len, fr_eof(fp),
 			   0 /* hw inserts cos value */,
 			   fnic->vlan_id, 1, 1, 1);
-fnic_send_frame_end:
+
+irq_restore:
 	spin_unlock_irqrestore(&fnic->wq_lock[0], flags);
 
+free_skb_on_err:
 	if (ret)
 		dev_kfree_skb_any(fp_skb(fp));
 
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 8a0d4d7b3..58ce9020d 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -118,7 +118,6 @@ static struct scsi_host_template fnic_host_template = {
 	.sg_tablesize = FNIC_MAX_SG_DESC_CNT,
 	.max_sectors = 0xffff,
 	.shost_attrs = fnic_attrs,
-	.use_blk_tags = 1,
 	.track_queue_depth = 1,
 };
 
@@ -697,13 +696,6 @@ static int fnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	fnic->fnic_max_tag_id = host->can_queue;
 
-	err = scsi_init_shared_tag_map(host, fnic->fnic_max_tag_id);
-	if (err) {
-		shost_printk(KERN_ERR, fnic->lport->host,
-			  "Unable to alloc shared tag map\n");
-		goto err_out_dev_close;
-	}
-
 	host->max_lun = fnic->config.luns_per_tgt;
 	host->max_id = FNIC_MAX_FCP_TARGET;
 	host->max_cmd_len = FCOE_MAX_CMD_LEN;
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 25436cd28..266b909fe 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -330,6 +330,7 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
 	int flags;
 	u8 exch_flags;
 	struct scsi_lun fc_lun;
+	int r;
 
 	if (sg_count) {
 		/* For each SGE, create a device desc entry */
@@ -346,6 +347,12 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
 			 io_req->sgl_list,
 			 sizeof(io_req->sgl_list[0]) * sg_count,
 			 PCI_DMA_TODEVICE);
+
+		r = pci_dma_mapping_error(fnic->pdev, io_req->sgl_list_pa);
+		if (r) {
+			printk(KERN_ERR "PCI mapping failed with error %d\n", r);
+			return SCSI_MLQUEUE_HOST_BUSY;
+		}
 	}
 
 	io_req->sense_buf_pa = pci_map_single(fnic->pdev,
@@ -353,6 +360,15 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
 					      SCSI_SENSE_BUFFERSIZE,
 					      PCI_DMA_FROMDEVICE);
 
+	r = pci_dma_mapping_error(fnic->pdev, io_req->sense_buf_pa);
+	if (r) {
+		pci_unmap_single(fnic->pdev, io_req->sgl_list_pa,
+				sizeof(io_req->sgl_list[0]) * sg_count,
+				PCI_DMA_TODEVICE);
+		printk(KERN_ERR "PCI mapping failed with error %d\n", r);
+		return SCSI_MLQUEUE_HOST_BUSY;
+	}
+
 	int_to_scsilun(sc->device->lun, &fc_lun);
 
 	/* Enqueue the descriptor in the Copy WQ */
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 8bb173e01..82ac1cd81 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -217,6 +217,13 @@ int scsi_add_host_with_dma(struct Scsi_Host *shost, struct device *dev,
 		error = scsi_mq_setup_tags(shost);
 		if (error)
 			goto fail;
+	} else {
+		shost->bqt = blk_init_tags(shost->can_queue,
+				shost->hostt->tag_alloc_policy);
+		if (!shost->bqt) {
+			error = -ENOMEM;
+			goto fail;
+		}
 	}
 
 	/*
@@ -326,6 +333,17 @@ static void scsi_host_dev_release(struct device *dev)
 		kfree(queuedata);
 	}
 
+	if (shost->shost_state == SHOST_CREATED) {
+		/*
+		 * Free the shost_dev device name here if scsi_host_alloc()
+		 * and scsi_host_put() have been called but neither
+		 * scsi_host_add() nor scsi_host_remove() has been called.
+		 * This avoids that the memory allocated for the shost_dev
+		 * name is leaked.
+		 */
+		kfree(dev_name(&shost->shost_dev));
+	}
+
 	scsi_destroy_command_freelist(shost);
 	if (shost_use_blk_mq(shost)) {
 		if (shost->tag_set.tags)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 40669f8dd..a3860367b 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -41,6 +41,7 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_eh.h>
+#include <scsi/scsi_transport_sas.h>
 #include <scsi/scsi_dbg.h>
 #include <linux/cciss_ioctl.h>
 #include <linux/string.h>
@@ -54,8 +55,11 @@
 #include "hpsa_cmd.h"
 #include "hpsa.h"
 
-/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */
-#define HPSA_DRIVER_VERSION "3.4.10-0"
+/*
+ * HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.'
+ * with an optional trailing '-' followed by a byte value (0-255).
+ */
+#define HPSA_DRIVER_VERSION "3.4.14-0"
 #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
 #define HPSA "hpsa"
 
@@ -205,6 +209,16 @@ static struct board_type products[] = {
 	{0xFFFF103C, "Unknown Smart Array", &SA5_access},
 };
 
+static struct scsi_transport_template *hpsa_sas_transport_template;
+static int hpsa_add_sas_host(struct ctlr_info *h);
+static void hpsa_delete_sas_host(struct ctlr_info *h);
+static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
+			struct hpsa_scsi_dev_t *device);
+static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device);
+static struct hpsa_scsi_dev_t
+	*hpsa_find_device_by_sas_rphy(struct ctlr_info *h,
+		struct sas_rphy *rphy);
+
 #define SCSI_CMD_BUSY ((struct scsi_cmnd *)&hpsa_cmd_busy)
 static const struct scsi_cmnd hpsa_cmd_busy;
 #define SCSI_CMD_IDLE ((struct scsi_cmnd *)&hpsa_cmd_idle)
@@ -230,6 +244,7 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 	int cmd_type);
 static void hpsa_free_cmd_pool(struct ctlr_info *h);
 #define VPD_PAGE (1 << 8)
+#define HPSA_SIMPLE_ERROR_BITS 0x03
 
 static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static void hpsa_scan_start(struct Scsi_Host *);
@@ -243,7 +258,7 @@ static int hpsa_slave_alloc(struct scsi_device *sdev);
 static int hpsa_slave_configure(struct scsi_device *sdev);
 static void hpsa_slave_destroy(struct scsi_device *sdev);
 
-static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno);
+static void hpsa_update_scsi_devices(struct ctlr_info *h);
 static int check_for_unit_attention(struct ctlr_info *h,
 	struct CommandList *c);
 static void check_ioctl_unit_attention(struct ctlr_info *h,
@@ -274,7 +289,10 @@ static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
 static void hpsa_command_resubmit_worker(struct work_struct *work);
 static u32 lockup_detected(struct ctlr_info *h);
 static int detect_controller_lockup(struct ctlr_info *h);
-static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device);
+static void hpsa_disable_rld_caching(struct ctlr_info *h);
+static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
+	struct ReportExtendedLUNdata *buf, int bufsize);
+static int hpsa_luns_changed(struct ctlr_info *h);
 
 static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
 {
@@ -606,7 +624,7 @@ static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[])
 }
 
 static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6",
-	"1(+0)ADM", "UNKNOWN"
+	"1(+0)ADM", "UNKNOWN", "PHYS DRV"
 };
 #define HPSA_RAID_0	0
 #define HPSA_RAID_4	1
@@ -615,7 +633,13 @@ static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6",
 #define HPSA_RAID_51	4
 #define HPSA_RAID_6	5	/* also used for RAID 60 */
 #define HPSA_RAID_ADM	6	/* also used for RAID 1+0 ADM */
-#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1)
+#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 2)
+#define PHYSICAL_DRIVE (ARRAY_SIZE(raid_label) - 1)
+
+static inline bool is_logical_device(struct hpsa_scsi_dev_t *device)
+{
+	return !device->physical_device;
+}
 
 static ssize_t raid_level_show(struct device *dev,
 	     struct device_attribute *attr, char *buf)
@@ -637,7 +661,7 @@ static ssize_t raid_level_show(struct device *dev,
 	}
 
 	/* Is this even a logical drive? */
-	if (!is_logical_dev_addr_mode(hdev->scsi3addr)) {
+	if (!is_logical_device(hdev)) {
 		spin_unlock_irqrestore(&h->lock, flags);
 		l = snprintf(buf, PAGE_SIZE, "N/A\n");
 		return l;
@@ -726,7 +750,6 @@ static ssize_t host_show_hp_ssd_smart_path_enabled(struct device *dev,
 }
 
 #define MAX_PATHS 8
-#define PATH_STRING_LEN 50
 
 static ssize_t path_info_show(struct device *dev,
 	     struct device_attribute *attr, char *buf)
@@ -742,9 +765,7 @@ static ssize_t path_info_show(struct device *dev,
 	u8 path_map_index = 0;
 	char *active;
 	unsigned char phys_connector[2];
-	unsigned char path[MAX_PATHS][PATH_STRING_LEN];
 
-	memset(path, 0, MAX_PATHS * PATH_STRING_LEN);
 	sdev = to_scsi_device(dev);
 	h = sdev_to_hba(sdev);
 	spin_lock_irqsave(&h->devlock, flags);
@@ -764,18 +785,19 @@ static ssize_t path_info_show(struct device *dev,
 		else
 			continue;
 
-		output_len = snprintf(path[i],
-				PATH_STRING_LEN, "[%d:%d:%d:%d] %20.20s ",
+		output_len += scnprintf(buf + output_len,
+				PAGE_SIZE - output_len,
+				"[%d:%d:%d:%d] %20.20s ",
 				h->scsi_host->host_no,
 				hdev->bus, hdev->target, hdev->lun,
 				scsi_device_type(hdev->devtype));
 
-		if (is_ext_target(h, hdev) ||
-			(hdev->devtype == TYPE_RAID) ||
-			is_logical_dev_addr_mode(hdev->scsi3addr)) {
-			output_len += snprintf(path[i] + output_len,
-						PATH_STRING_LEN, "%s\n",
-						active);
+		if (hdev->external ||
+			hdev->devtype == TYPE_RAID ||
+			is_logical_device(hdev)) {
+			output_len += snprintf(buf + output_len,
+						PAGE_SIZE - output_len,
+						"%s\n", active);
 			continue;
 		}
 
@@ -787,36 +809,33 @@ static ssize_t path_info_show(struct device *dev,
 		if (phys_connector[1] < '0')
 			phys_connector[1] = '0';
 		if (hdev->phys_connector[i] > 0)
-			output_len += snprintf(path[i] + output_len,
-				PATH_STRING_LEN,
+			output_len += snprintf(buf + output_len,
+				PAGE_SIZE - output_len,
 				"PORT: %.2s ",
 				phys_connector);
-		if (hdev->devtype == TYPE_DISK &&
-			hdev->expose_state != HPSA_DO_NOT_EXPOSE) {
+		if (hdev->devtype == TYPE_DISK && hdev->expose_device) {
 			if (box == 0 || box == 0xFF) {
-				output_len += snprintf(path[i] + output_len,
-					PATH_STRING_LEN,
+				output_len += snprintf(buf + output_len,
+					PAGE_SIZE - output_len,
 					"BAY: %hhu %s\n",
 					bay, active);
 			} else {
-				output_len += snprintf(path[i] + output_len,
-					PATH_STRING_LEN,
+				output_len += snprintf(buf + output_len,
+					PAGE_SIZE - output_len,
 					"BOX: %hhu BAY: %hhu %s\n",
 					box, bay, active);
 			}
 		} else if (box != 0 && box != 0xFF) {
-			output_len += snprintf(path[i] + output_len,
-				PATH_STRING_LEN, "BOX: %hhu %s\n",
+			output_len += snprintf(buf + output_len,
+				PAGE_SIZE - output_len, "BOX: %hhu %s\n",
 				box, active);
 		} else
-			output_len += snprintf(path[i] + output_len,
-				PATH_STRING_LEN, "%s\n", active);
+			output_len += snprintf(buf + output_len,
+				PAGE_SIZE - output_len, "%s\n", active);
 	}
 
 	spin_unlock_irqrestore(&h->devlock, flags);
-	return snprintf(buf, output_len+1, "%s%s%s%s%s%s%s%s",
-		path[0], path[1], path[2], path[3],
-		path[4], path[5], path[6], path[7]);
+	return output_len;
 }
 
 static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
@@ -848,7 +867,6 @@ static struct device_attribute *hpsa_sdev_attrs[] = {
 	&dev_attr_unique_id,
 	&dev_attr_hp_ssd_smart_path_enabled,
 	&dev_attr_path_info,
-	&dev_attr_lockup_detected,
 	NULL,
 };
 
@@ -860,6 +878,7 @@ static struct device_attribute *hpsa_shost_attrs[] = {
 	&dev_attr_resettable,
 	&dev_attr_hp_ssd_smart_path_status,
 	&dev_attr_raid_offload_debug,
+	&dev_attr_lockup_detected,
 	NULL,
 };
 
@@ -1134,25 +1153,62 @@ static int hpsa_find_target_lun(struct ctlr_info *h,
 	return !found;
 }
 
-static inline void hpsa_show_dev_msg(const char *level, struct ctlr_info *h,
+static void hpsa_show_dev_msg(const char *level, struct ctlr_info *h,
 	struct hpsa_scsi_dev_t *dev, char *description)
 {
+#define LABEL_SIZE 25
+	char label[LABEL_SIZE];
+
+	if (h == NULL || h->pdev == NULL || h->scsi_host == NULL)
+		return;
+
+	switch (dev->devtype) {
+	case TYPE_RAID:
+		snprintf(label, LABEL_SIZE, "controller");
+		break;
+	case TYPE_ENCLOSURE:
+		snprintf(label, LABEL_SIZE, "enclosure");
+		break;
+	case TYPE_DISK:
+		if (dev->external)
+			snprintf(label, LABEL_SIZE, "external");
+		else if (!is_logical_dev_addr_mode(dev->scsi3addr))
+			snprintf(label, LABEL_SIZE, "%s",
+				raid_label[PHYSICAL_DRIVE]);
+		else
+			snprintf(label, LABEL_SIZE, "RAID-%s",
+				dev->raid_level > RAID_UNKNOWN ? "?" :
+				raid_label[dev->raid_level]);
+		break;
+	case TYPE_ROM:
+		snprintf(label, LABEL_SIZE, "rom");
+		break;
+	case TYPE_TAPE:
+		snprintf(label, LABEL_SIZE, "tape");
+		break;
+	case TYPE_MEDIUM_CHANGER:
+		snprintf(label, LABEL_SIZE, "changer");
+		break;
+	default:
+		snprintf(label, LABEL_SIZE, "UNKNOWN");
+		break;
+	}
+
 	dev_printk(level, &h->pdev->dev,
-			"scsi %d:%d:%d:%d: %s %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n",
+			"scsi %d:%d:%d:%d: %s %s %.8s %.16s %s SSDSmartPathCap%c En%c Exp=%d\n",
 			h->scsi_host->host_no, dev->bus, dev->target, dev->lun,
 			description,
 			scsi_device_type(dev->devtype),
 			dev->vendor,
 			dev->model,
-			dev->raid_level > RAID_UNKNOWN ?
-				"RAID-?" : raid_label[dev->raid_level],
+			label,
 			dev->offload_config ? '+' : '-',
 			dev->offload_enabled ? '+' : '-',
-			dev->expose_state);
+			dev->expose_device);
 }
 
 /* Add an entry into h->dev[] array. */
-static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno,
+static int hpsa_scsi_add_entry(struct ctlr_info *h,
 		struct hpsa_scsi_dev_t *device,
 		struct hpsa_scsi_dev_t *added[], int *nadded)
 {
@@ -1221,14 +1277,14 @@ lun_assigned:
 	added[*nadded] = device;
 	(*nadded)++;
 	hpsa_show_dev_msg(KERN_INFO, h, device,
-		device->expose_state & HPSA_SCSI_ADD ? "added" : "masked");
+		device->expose_device ? "added" : "masked");
 	device->offload_to_be_enabled = device->offload_enabled;
 	device->offload_enabled = 0;
 	return 0;
 }
 
 /* Update an entry in h->dev[] array. */
-static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
+static void hpsa_scsi_update_entry(struct ctlr_info *h,
 	int entry, struct hpsa_scsi_dev_t *new_entry)
 {
 	int offload_enabled;
@@ -1276,7 +1332,7 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
 }
 
 /* Replace an entry from h->dev[] array. */
-static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
+static void hpsa_scsi_replace_entry(struct ctlr_info *h,
 	int entry, struct hpsa_scsi_dev_t *new_entry,
 	struct hpsa_scsi_dev_t *added[], int *nadded,
 	struct hpsa_scsi_dev_t *removed[], int *nremoved)
@@ -1304,7 +1360,7 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
 }
 
 /* Remove an entry from h->dev[] array. */
-static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry,
+static void hpsa_scsi_remove_entry(struct ctlr_info *h, int entry,
 	struct hpsa_scsi_dev_t *removed[], int *nremoved)
 {
 	/* assumes h->devlock is held */
@@ -1415,6 +1471,9 @@ static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle,
 #define DEVICE_CHANGED 1
 #define DEVICE_SAME 2
 #define DEVICE_UPDATED 3
+	if (needle == NULL)
+		return DEVICE_NOT_FOUND;
+
 	for (i = 0; i < haystack_size; i++) {
 		if (haystack[i] == NULL) /* previously removed. */
 			continue;
@@ -1577,9 +1636,11 @@ static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
 		if (!logical_drive->offload_config)
 			continue;
 		for (j = 0; j < ndevices; j++) {
+			if (dev[j] == NULL)
+				continue;
 			if (dev[j]->devtype != TYPE_DISK)
 				continue;
-			if (is_logical_dev_addr_mode(dev[j]->scsi3addr))
+			if (is_logical_device(dev[j]))
 				continue;
 			if (dev[j]->ioaccel_handle != dd[i].ioaccel_handle)
 				continue;
@@ -1620,9 +1681,11 @@ static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
 	int i;
 
 	for (i = 0; i < ndevices; i++) {
+		if (dev[i] == NULL)
+			continue;
 		if (dev[i]->devtype != TYPE_DISK)
 			continue;
-		if (!is_logical_dev_addr_mode(dev[i]->scsi3addr))
+		if (!is_logical_device(dev[i]))
 			continue;
 
 		/*
@@ -1638,7 +1701,50 @@ static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
 	}
 }
 
-static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
+static int hpsa_add_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
+{
+	int rc = 0;
+
+	if (!h->scsi_host)
+		return 1;
+
+	if (is_logical_device(device)) /* RAID */
+		rc = scsi_add_device(h->scsi_host, device->bus,
+					device->target, device->lun);
+	else /* HBA */
+		rc = hpsa_add_sas_device(h->sas_host, device);
+
+	return rc;
+}
+
+static void hpsa_remove_device(struct ctlr_info *h,
+			struct hpsa_scsi_dev_t *device)
+{
+	struct scsi_device *sdev = NULL;
+
+	if (!h->scsi_host)
+		return;
+
+	if (is_logical_device(device)) { /* RAID */
+		sdev = scsi_device_lookup(h->scsi_host, device->bus,
+						device->target, device->lun);
+		if (sdev) {
+			scsi_remove_device(sdev);
+			scsi_device_put(sdev);
+		} else {
+			/*
+			 * We don't expect to get here.  Future commands
+			 * to this device will get a selection timeout as
+			 * if the device were gone.
+			 */
+			hpsa_show_dev_msg(KERN_WARNING, h, device,
+					"didn't find device for removal.");
+		}
+	} else /* HBA */
+		hpsa_remove_sas_device(device);
+}
+
+static void adjust_hpsa_scsi_table(struct ctlr_info *h,
 	struct hpsa_scsi_dev_t *sd[], int nsds)
 {
 	/* sd contains scsi3 addresses and devtypes, and inquiry
@@ -1650,7 +1756,15 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
 	unsigned long flags;
 	struct hpsa_scsi_dev_t **added, **removed;
 	int nadded, nremoved;
-	struct Scsi_Host *sh = NULL;
+
+	/*
+	 * A reset can cause a device status to change
+	 * re-schedule the scan to see what happened.
+	 */
+	if (h->reset_in_progress) {
+		h->drv_req_rescan = 1;
+		return;
+	}
 
 	added = kzalloc(sizeof(*added) * HPSA_MAX_DEVICES, GFP_KERNEL);
 	removed = kzalloc(sizeof(*removed) * HPSA_MAX_DEVICES, GFP_KERNEL);
@@ -1678,19 +1792,18 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
 		device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry);
 		if (device_change == DEVICE_NOT_FOUND) {
 			changes++;
-			hpsa_scsi_remove_entry(h, hostno, i,
-				removed, &nremoved);
+			hpsa_scsi_remove_entry(h, i, removed, &nremoved);
 			continue; /* remove ^^^, hence i not incremented */
 		} else if (device_change == DEVICE_CHANGED) {
 			changes++;
-			hpsa_scsi_replace_entry(h, hostno, i, sd[entry],
+			hpsa_scsi_replace_entry(h, i, sd[entry],
 				added, &nadded, removed, &nremoved);
 			/* Set it to NULL to prevent it from being freed
 			 * at the bottom of hpsa_update_scsi_devices()
 			 */
 			sd[entry] = NULL;
 		} else if (device_change == DEVICE_UPDATED) {
-			hpsa_scsi_update_entry(h, hostno, i, sd[entry]);
+			hpsa_scsi_update_entry(h, i, sd[entry]);
 		}
 		i++;
 	}
@@ -1718,8 +1831,7 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
 					h->ndevices, &entry);
 		if (device_change == DEVICE_NOT_FOUND) {
 			changes++;
-			if (hpsa_scsi_add_entry(h, hostno, sd[i],
-				added, &nadded) != 0)
+			if (hpsa_scsi_add_entry(h, sd[i], added, &nadded) != 0)
 				break;
 			sd[i] = NULL; /* prevent from being freed later. */
 		} else if (device_change == DEVICE_CHANGED) {
@@ -1735,8 +1847,11 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
 	/* Now that h->dev[]->phys_disk[] is coherent, we can enable
 	 * any logical drives that need it enabled.
 	 */
-	for (i = 0; i < h->ndevices; i++)
+	for (i = 0; i < h->ndevices; i++) {
+		if (h->dev[i] == NULL)
+			continue;
 		h->dev[i]->offload_enabled = h->dev[i]->offload_to_be_enabled;
+	}
 
 	spin_unlock_irqrestore(&h->devlock, flags);
 
@@ -1755,47 +1870,37 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
 	 * (or if there are no changes) scsi_scan_host will do it later the
 	 * first time through.
 	 */
-	if (hostno == -1 || !changes)
+	if (!changes)
 		goto free_and_out;
 
-	sh = h->scsi_host;
 	/* Notify scsi mid layer of any removed devices */
 	for (i = 0; i < nremoved; i++) {
-		if (removed[i]->expose_state & HPSA_SCSI_ADD) {
-			struct scsi_device *sdev =
-				scsi_device_lookup(sh, removed[i]->bus,
-					removed[i]->target, removed[i]->lun);
-			if (sdev != NULL) {
-				scsi_remove_device(sdev);
-				scsi_device_put(sdev);
-			} else {
-				/*
-				 * We don't expect to get here.
-				 * future cmds to this device will get selection
-				 * timeout as if the device was gone.
-				 */
-				hpsa_show_dev_msg(KERN_WARNING, h, removed[i],
-					"didn't find device for removal.");
-			}
-		}
+		if (removed[i] == NULL)
+			continue;
+		if (removed[i]->expose_device)
+			hpsa_remove_device(h, removed[i]);
 		kfree(removed[i]);
 		removed[i] = NULL;
 	}
 
 	/* Notify scsi mid layer of any added devices */
 	for (i = 0; i < nadded; i++) {
-		if (!(added[i]->expose_state & HPSA_SCSI_ADD))
+		int rc = 0;
+
+		if (added[i] == NULL)
+			continue;
+		if (!(added[i]->expose_device))
 			continue;
-		if (scsi_add_device(sh, added[i]->bus,
-			added[i]->target, added[i]->lun) == 0)
+		rc = hpsa_add_device(h, added[i]);
+		if (!rc)
 			continue;
-		hpsa_show_dev_msg(KERN_WARNING, h, added[i],
-					"addition failed, device not added.");
+		dev_warn(&h->pdev->dev,
+			"addition failed %d, device not added.", rc);
 		/* now we have to remove it from h->dev,
 		 * since it didn't get added to scsi mid layer
 		 */
 		fixup_botched_add(h, added[i]);
-		added[i] = NULL;
+		h->drv_req_rescan = 1;
 	}
 
 free_and_out:
@@ -1829,11 +1934,24 @@ static int hpsa_slave_alloc(struct scsi_device *sdev)
 
 	h = sdev_to_hba(sdev);
 	spin_lock_irqsave(&h->devlock, flags);
-	sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
-		sdev_id(sdev), sdev->lun);
-	if (likely(sd)) {
+	if (sdev_channel(sdev) == HPSA_PHYSICAL_DEVICE_BUS) {
+		struct scsi_target *starget;
+		struct sas_rphy *rphy;
+
+		starget = scsi_target(sdev);
+		rphy = target_to_rphy(starget);
+		sd = hpsa_find_device_by_sas_rphy(h, rphy);
+		if (sd) {
+			sd->target = sdev_id(sdev);
+			sd->lun = sdev->lun;
+		}
+	} else
+		sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
+					sdev_id(sdev), sdev->lun);
+
+	if (sd && sd->expose_device) {
 		atomic_set(&sd->ioaccel_cmds_out, 0);
-		sdev->hostdata = (sd->expose_state & HPSA_SCSI_ADD) ? sd : NULL;
+		sdev->hostdata = sd;
 	} else
 		sdev->hostdata = NULL;
 	spin_unlock_irqrestore(&h->devlock, flags);
@@ -1847,7 +1965,7 @@ static int hpsa_slave_configure(struct scsi_device *sdev)
 	int queue_depth;
 
 	sd = sdev->hostdata;
-	sdev->no_uld_attach = !sd || !(sd->expose_state & HPSA_ULD_ATTACH);
+	sdev->no_uld_attach = !sd || !sd->expose_device;
 
 	if (sd)
 		queue_depth = sd->queue_depth != 0 ?
@@ -1955,7 +2073,7 @@ static int hpsa_map_ioaccel2_sg_chain_block(struct ctlr_info *h,
 	u32 chain_size;
 
 	chain_block = h->ioaccel2_cmd_sg_list[c->cmdindex];
-	chain_size = le32_to_cpu(cp->data_len);
+	chain_size = le32_to_cpu(cp->sg[0].length);
 	temp64 = pci_map_single(h->pdev, chain_block, chain_size,
 				PCI_DMA_TODEVICE);
 	if (dma_mapping_error(&h->pdev->dev, temp64)) {
@@ -1976,7 +2094,7 @@ static void hpsa_unmap_ioaccel2_sg_chain_block(struct ctlr_info *h,
 
 	chain_sg = cp->sg;
 	temp64 = le64_to_cpu(chain_sg->address);
-	chain_size = le32_to_cpu(cp->data_len);
+	chain_size = le32_to_cpu(cp->sg[0].length);
 	pci_unmap_single(h->pdev, temp64, chain_size, PCI_DMA_TODEVICE);
 }
 
@@ -2210,7 +2328,7 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
 	 * the normal I/O path so the controller can handle whatever's
 	 * wrong.
 	 */
-	if (is_logical_dev_addr_mode(dev->scsi3addr) &&
+	if (is_logical_device(dev) &&
 		c2->error_data.serv_response ==
 			IOACCEL2_SERV_RESPONSE_FAILURE) {
 		if (c2->error_data.status ==
@@ -2330,7 +2448,7 @@ static void complete_scsi_command(struct CommandList *cp)
 		 * the normal I/O path so the controller can handle whatever's
 		 * wrong.
 		 */
-		if (is_logical_dev_addr_mode(dev->scsi3addr)) {
+		if (is_logical_device(dev)) {
 			if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
 				dev->offload_enabled = 0;
 			return hpsa_retry_cmd(h, cp);
@@ -2709,9 +2827,8 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
 
 
 	/* fill_cmd can't fail here, no data buffer to map. */
-	(void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
+	(void) fill_cmd(c, reset_type, h, NULL, 0, 0,
 			scsi3addr, TYPE_MSG);
-	c->Request.CDB[1] = reset_type; /* fill_cmd defaults to LUN reset */
 	rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
 	if (rc) {
 		dev_warn(&h->pdev->dev, "Failed to send reset command\n");
@@ -2984,6 +3101,66 @@ out:
 	return rc;
 }
 
+static int hpsa_bmic_sense_subsystem_information(struct ctlr_info *h,
+		unsigned char scsi3addr[], u16 bmic_device_index,
+		struct bmic_sense_subsystem_info *buf, size_t bufsize)
+{
+	int rc = IO_OK;
+	struct CommandList *c;
+	struct ErrorInfo *ei;
+
+	c = cmd_alloc(h);
+
+	rc = fill_cmd(c, BMIC_SENSE_SUBSYSTEM_INFORMATION, h, buf, bufsize,
+		0, RAID_CTLR_LUNID, TYPE_CMD);
+	if (rc)
+		goto out;
+
+	c->Request.CDB[2] = bmic_device_index & 0xff;
+	c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
+
+	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+				PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+	if (rc)
+		goto out;
+	ei = c->err_info;
+	if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+		hpsa_scsi_interpret_error(h, c);
+		rc = -1;
+	}
+out:
+	cmd_free(h, c);
+	return rc;
+}
+
+static int hpsa_bmic_id_controller(struct ctlr_info *h,
+	struct bmic_identify_controller *buf, size_t bufsize)
+{
+	int rc = IO_OK;
+	struct CommandList *c;
+	struct ErrorInfo *ei;
+
+	c = cmd_alloc(h);
+
+	rc = fill_cmd(c, BMIC_IDENTIFY_CONTROLLER, h, buf, bufsize,
+		0, RAID_CTLR_LUNID, TYPE_CMD);
+	if (rc)
+		goto out;
+
+	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+		PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+	if (rc)
+		goto out;
+	ei = c->err_info;
+	if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+		hpsa_scsi_interpret_error(h, c);
+		rc = -1;
+	}
+out:
+	cmd_free(h, c);
+	return rc;
+}
+
 static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
 		unsigned char scsi3addr[], u16 bmic_device_index,
 		struct bmic_identify_physical_device *buf, size_t bufsize)
@@ -3010,9 +3187,71 @@ static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
 	}
 out:
 	cmd_free(h, c);
+
 	return rc;
 }
 
+static u64 hpsa_get_sas_address_from_report_physical(struct ctlr_info *h,
+						unsigned char *scsi3addr)
+{
+	struct ReportExtendedLUNdata *physdev;
+	u32 nphysicals;
+	u64 sa = 0;
+	int i;
+
+	physdev = kzalloc(sizeof(*physdev), GFP_KERNEL);
+	if (!physdev)
+		return 0;
+
+	if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) {
+		dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
+		kfree(physdev);
+		return 0;
+	}
+	nphysicals = get_unaligned_be32(physdev->LUNListLength) / 24;
+
+	for (i = 0; i < nphysicals; i++)
+		if (!memcmp(&physdev->LUN[i].lunid[0], scsi3addr, 8)) {
+			sa = get_unaligned_be64(&physdev->LUN[i].wwid[0]);
+			break;
+		}
+
+	kfree(physdev);
+
+	return sa;
+}
+
+static void hpsa_get_sas_address(struct ctlr_info *h, unsigned char *scsi3addr,
+					struct hpsa_scsi_dev_t *dev)
+{
+	int rc;
+	u64 sa = 0;
+
+	if (is_hba_lunid(scsi3addr)) {
+		struct bmic_sense_subsystem_info *ssi;
+
+		ssi = kzalloc(sizeof(*ssi), GFP_KERNEL);
+		if (ssi == NULL) {
+			dev_warn(&h->pdev->dev,
+				"%s: out of memory\n", __func__);
+			return;
+		}
+
+		rc = hpsa_bmic_sense_subsystem_information(h,
+					scsi3addr, 0, ssi, sizeof(*ssi));
+		if (rc == 0) {
+			sa = get_unaligned_be64(ssi->primary_world_wide_id);
+			h->sas_address = sa;
+		}
+
+		kfree(ssi);
+	} else
+		sa = hpsa_get_sas_address_from_report_physical(h, scsi3addr);
+
+	dev->sas_address = sa;
+}
+
+/* Get a device id from inquiry page 0x83 */
 static int hpsa_vpd_page_supported(struct ctlr_info *h,
 	unsigned char scsi3addr[], u8 page)
 {
@@ -3097,7 +3336,7 @@ out:
 
 /* Get the device id from inquiry page 0x83 */
 static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr,
-	unsigned char *device_id, int buflen)
+	unsigned char *device_id, int index, int buflen)
 {
 	int rc;
 	unsigned char *buf;
@@ -3109,8 +3348,10 @@ static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr,
 		return -ENOMEM;
 	rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | 0x83, buf, 64);
 	if (rc == 0)
-		memcpy(device_id, &buf[8], buflen);
+		memcpy(device_id, &buf[index], buflen);
+
 	kfree(buf);
+
 	return rc != 0;
 }
 
@@ -3339,6 +3580,18 @@ static int hpsa_device_supports_aborts(struct ctlr_info *h,
 	return rc;
 }
 
+static void sanitize_inquiry_string(unsigned char *s, int len)
+{
+	bool terminated = false;
+
+	for (; len > 0; (--len, ++s)) {
+		if (*s == 0)
+			terminated = true;
+		if (terminated || *s < 0x20 || *s > 0x7e)
+			*s = ' ';
+	}
+}
+
 static int hpsa_update_device_info(struct ctlr_info *h,
 	unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
 	unsigned char *is_OBDR_device)
@@ -3351,10 +3604,13 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 
 	unsigned char *inq_buff;
 	unsigned char *obdr_sig;
+	int rc = 0;
 
 	inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
-	if (!inq_buff)
+	if (!inq_buff) {
+		rc = -ENOMEM;
 		goto bail_out;
+	}
 
 	/* Do an inquiry to the device to see what it is. */
 	if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
@@ -3362,9 +3618,13 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 		/* Inquiry failed (msg printed already) */
 		dev_err(&h->pdev->dev,
 			"hpsa_update_device_info: inquiry failed\n");
+		rc = -EIO;
 		goto bail_out;
 	}
 
+	sanitize_inquiry_string(&inq_buff[8], 8);
+	sanitize_inquiry_string(&inq_buff[16], 16);
+
 	this_device->devtype = (inq_buff[0] & 0x1f);
 	memcpy(this_device->scsi3addr, scsi3addr, 8);
 	memcpy(this_device->vendor, &inq_buff[8],
@@ -3373,7 +3633,7 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 		sizeof(this_device->model));
 	memset(this_device->device_id, 0,
 		sizeof(this_device->device_id));
-	hpsa_get_device_id(h, scsi3addr, this_device->device_id,
+	hpsa_get_device_id(h, scsi3addr, this_device->device_id, 8,
 		sizeof(this_device->device_id));
 
 	if (this_device->devtype == TYPE_DISK &&
@@ -3411,7 +3671,7 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 
 bail_out:
 	kfree(inq_buff);
-	return 1;
+	return rc;
 }
 
 static void hpsa_update_device_supports_aborts(struct ctlr_info *h,
@@ -3439,115 +3699,39 @@ static void hpsa_update_device_supports_aborts(struct ctlr_info *h,
 	}
 }
 
-static unsigned char *ext_target_model[] = {
-	"MSA2012",
-	"MSA2024",
-	"MSA2312",
-	"MSA2324",
-	"P2000 G3 SAS",
-	"MSA 2040 SAS",
-	NULL,
-};
-
-static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
-{
-	int i;
-
-	for (i = 0; ext_target_model[i]; i++)
-		if (strncmp(device->model, ext_target_model[i],
-			strlen(ext_target_model[i])) == 0)
-			return 1;
-	return 0;
-}
-
-/* Helper function to assign bus, target, lun mapping of devices.
- * Puts non-external target logical volumes on bus 0, external target logical
- * volumes on bus 1, physical devices on bus 2. and the hba on bus 3.
+/*
+ * Helper function to assign bus, target, lun mapping of devices.
  * Logical drive target and lun are assigned at this time, but
  * physical device lun and target assignment are deferred (assigned
  * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.)
- */
+*/
 static void figure_bus_target_lun(struct ctlr_info *h,
 	u8 *lunaddrbytes, struct hpsa_scsi_dev_t *device)
 {
-	u32 lunid = le32_to_cpu(*((__le32 *) lunaddrbytes));
+	u32 lunid = get_unaligned_le32(lunaddrbytes);
 
 	if (!is_logical_dev_addr_mode(lunaddrbytes)) {
 		/* physical device, target and lun filled in later */
 		if (is_hba_lunid(lunaddrbytes))
-			hpsa_set_bus_target_lun(device, 3, 0, lunid & 0x3fff);
+			hpsa_set_bus_target_lun(device,
+					HPSA_HBA_BUS, 0, lunid & 0x3fff);
 		else
 			/* defer target, lun assignment for physical devices */
-			hpsa_set_bus_target_lun(device, 2, -1, -1);
+			hpsa_set_bus_target_lun(device,
+					HPSA_PHYSICAL_DEVICE_BUS, -1, -1);
 		return;
 	}
 	/* It's a logical device */
-	if (is_ext_target(h, device)) {
-		/* external target way, put logicals on bus 1
-		 * and match target/lun numbers box
-		 * reports, other smart array, bus 0, target 0, match lunid
-		 */
+	if (device->external) {
 		hpsa_set_bus_target_lun(device,
-			1, (lunid >> 16) & 0x3fff, lunid & 0x00ff);
+			HPSA_EXTERNAL_RAID_VOLUME_BUS, (lunid >> 16) & 0x3fff,
+			lunid & 0x00ff);
 		return;
 	}
-	hpsa_set_bus_target_lun(device, 0, 0, lunid & 0x3fff);
+	hpsa_set_bus_target_lun(device, HPSA_RAID_VOLUME_BUS,
+				0, lunid & 0x3fff);
 }
 
-/*
- * If there is no lun 0 on a target, linux won't find any devices.
- * For the external targets (arrays), we have to manually detect the enclosure
- * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report
- * it for some reason.  *tmpdevice is the target we're adding,
- * this_device is a pointer into the current element of currentsd[]
- * that we're building up in update_scsi_devices(), below.
- * lunzerobits is a bitmap that tracks which targets already have a
- * lun 0 assigned.
- * Returns 1 if an enclosure was added, 0 if not.
- */
-static int add_ext_target_dev(struct ctlr_info *h,
-	struct hpsa_scsi_dev_t *tmpdevice,
-	struct hpsa_scsi_dev_t *this_device, u8 *lunaddrbytes,
-	unsigned long lunzerobits[], int *n_ext_target_devs)
-{
-	unsigned char scsi3addr[8];
-
-	if (test_bit(tmpdevice->target, lunzerobits))
-		return 0; /* There is already a lun 0 on this target. */
-
-	if (!is_logical_dev_addr_mode(lunaddrbytes))
-		return 0; /* It's the logical targets that may lack lun 0. */
-
-	if (!is_ext_target(h, tmpdevice))
-		return 0; /* Only external target devices have this problem. */
-
-	if (tmpdevice->lun == 0) /* if lun is 0, then we have a lun 0. */
-		return 0;
-
-	memset(scsi3addr, 0, 8);
-	scsi3addr[3] = tmpdevice->target;
-	if (is_hba_lunid(scsi3addr))
-		return 0; /* Don't add the RAID controller here. */
-
-	if (is_scsi_rev_5(h))
-		return 0; /* p1210m doesn't need to do this. */
-
-	if (*n_ext_target_devs >= MAX_EXT_TARGETS) {
-		dev_warn(&h->pdev->dev, "Maximum number of external "
-			"target devices exceeded.  Check your hardware "
-			"configuration.");
-		return 0;
-	}
-
-	if (hpsa_update_device_info(h, scsi3addr, this_device, NULL))
-		return 0;
-	(*n_ext_target_devs)++;
-	hpsa_set_bus_target_lun(this_device,
-				tmpdevice->bus, tmpdevice->target, 0);
-	hpsa_update_device_supports_aborts(h, this_device, scsi3addr);
-	set_bit(tmpdevice->target, lunzerobits);
-	return 1;
-}
 
 /*
  * Get address of physical disk used for an ioaccel2 mode command:
@@ -3577,6 +3761,27 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
 	return 0;
 }
 
+static int  figure_external_status(struct ctlr_info *h, int raid_ctlr_position,
+	int i, int nphysicals, int nlocal_logicals)
+{
+	/* In report logicals, local logicals are listed first,
+	* then any externals.
+	*/
+	int logicals_start = nphysicals + (raid_ctlr_position == 0);
+
+	if (i == raid_ctlr_position)
+		return 0;
+
+	if (i < logicals_start)
+		return 0;
+
+	/* i is in logicals range, but still within local logicals */
+	if ((i - nphysicals - (raid_ctlr_position == 0)) < nlocal_logicals)
+		return 0;
+
+	return 1; /* it's an external lun */
+}
+
 /*
  * Do CISS_REPORT_PHYS and CISS_REPORT_LOG.  Data is returned in physdev,
  * logdev.  The number of luns in physdev and logdev are returned in
@@ -3650,19 +3855,18 @@ static u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position,
 /* get physical drive ioaccel handle and queue depth */
 static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
 		struct hpsa_scsi_dev_t *dev,
-		u8 *lunaddrbytes,
+		struct ReportExtendedLUNdata *rlep, int rle_index,
 		struct bmic_identify_physical_device *id_phys)
 {
 	int rc;
-	struct ext_report_lun_entry *rle =
-		(struct ext_report_lun_entry *) lunaddrbytes;
+	struct ext_report_lun_entry *rle = &rlep->LUN[rle_index];
 
 	dev->ioaccel_handle = rle->ioaccel_handle;
-	if (PHYS_IOACCEL(lunaddrbytes) && dev->ioaccel_handle)
+	if ((rle->device_flags & 0x08) && dev->ioaccel_handle)
 		dev->hba_ioaccel_enabled = 1;
 	memset(id_phys, 0, sizeof(*id_phys));
-	rc = hpsa_bmic_id_physical_device(h, lunaddrbytes,
-			GET_BMIC_DRIVE_NUMBER(lunaddrbytes), id_phys,
+	rc = hpsa_bmic_id_physical_device(h, &rle->lunid[0],
+			GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]), id_phys,
 			sizeof(*id_phys));
 	if (!rc)
 		/* Reserve space for FW operations */
@@ -3673,16 +3877,15 @@ static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
 				DRIVE_CMDS_RESERVED_FOR_FW;
 	else
 		dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */
-	atomic_set(&dev->ioaccel_cmds_out, 0);
-	atomic_set(&dev->reset_cmds_out, 0);
 }
 
 static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device,
-	u8 *lunaddrbytes,
+	struct ReportExtendedLUNdata *rlep, int rle_index,
 	struct bmic_identify_physical_device *id_phys)
 {
-	if (PHYS_IOACCEL(lunaddrbytes)
-		&& this_device->ioaccel_handle)
+	struct ext_report_lun_entry *rle = &rlep->LUN[rle_index];
+
+	if ((rle->device_flags & 0x08) && this_device->ioaccel_handle)
 		this_device->hba_ioaccel_enabled = 1;
 
 	memcpy(&this_device->active_path_index,
@@ -3702,7 +3905,33 @@ static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device,
 		sizeof(this_device->bay));
 }
 
-static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
+/* get number of local logical disks. */
+static int hpsa_set_local_logical_count(struct ctlr_info *h,
+	struct bmic_identify_controller *id_ctlr,
+	u32 *nlocals)
+{
+	int rc;
+
+	if (!id_ctlr) {
+		dev_warn(&h->pdev->dev, "%s: id_ctlr buffer is NULL.\n",
+			__func__);
+		return -ENOMEM;
+	}
+	memset(id_ctlr, 0, sizeof(*id_ctlr));
+	rc = hpsa_bmic_id_controller(h, id_ctlr, sizeof(*id_ctlr));
+	if (!rc)
+		if (id_ctlr->configured_logical_drive_count < 256)
+			*nlocals = id_ctlr->configured_logical_drive_count;
+		else
+			*nlocals = le16_to_cpu(
+					id_ctlr->extended_logical_unit_count);
+	else
+		*nlocals = -1;
+	return rc;
+}
+
+
+static void hpsa_update_scsi_devices(struct ctlr_info *h)
 {
 	/* the idea here is we could get notified
 	 * that some devices have changed, so we do a report
@@ -3717,13 +3946,16 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 	struct ReportExtendedLUNdata *physdev_list = NULL;
 	struct ReportLUNdata *logdev_list = NULL;
 	struct bmic_identify_physical_device *id_phys = NULL;
+	struct bmic_identify_controller *id_ctlr = NULL;
 	u32 nphysicals = 0;
 	u32 nlogicals = 0;
+	u32 nlocal_logicals = 0;
 	u32 ndev_allocated = 0;
 	struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
 	int ncurrent = 0;
 	int i, n_ext_target_devs, ndevs_to_allocate;
 	int raid_ctlr_position;
+	bool physical_device;
 	DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS);
 
 	currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL);
@@ -3731,17 +3963,29 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 	logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL);
 	tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
 	id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
+	id_ctlr = kzalloc(sizeof(*id_ctlr), GFP_KERNEL);
 
 	if (!currentsd || !physdev_list || !logdev_list ||
-		!tmpdevice || !id_phys) {
+		!tmpdevice || !id_phys || !id_ctlr) {
 		dev_err(&h->pdev->dev, "out of memory\n");
 		goto out;
 	}
 	memset(lunzerobits, 0, sizeof(lunzerobits));
 
+	h->drv_req_rescan = 0; /* cancel scheduled rescan - we're doing it. */
+
 	if (hpsa_gather_lun_info(h, physdev_list, &nphysicals,
-			logdev_list, &nlogicals))
+			logdev_list, &nlogicals)) {
+		h->drv_req_rescan = 1;
 		goto out;
+	}
+
+	/* Set number of local logicals (non PTRAID) */
+	if (hpsa_set_local_logical_count(h, id_ctlr, &nlocal_logicals)) {
+		dev_warn(&h->pdev->dev,
+			"%s: Can't determine number of local logical devices.\n",
+			__func__);
+	}
 
 	/* We might see up to the maximum number of logical and physical disks
 	 * plus external target devices, and a device for the local RAID
@@ -3762,6 +4006,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 		if (!currentsd[i]) {
 			dev_warn(&h->pdev->dev, "out of memory at %s:%d\n",
 				__FILE__, __LINE__);
+			h->drv_req_rescan = 1;
 			goto out;
 		}
 		ndev_allocated++;
@@ -3776,49 +4021,74 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 	n_ext_target_devs = 0;
 	for (i = 0; i < nphysicals + nlogicals + 1; i++) {
 		u8 *lunaddrbytes, is_OBDR = 0;
+		int rc = 0;
+		int phys_dev_index = i - (raid_ctlr_position == 0);
+
+		physical_device = i < nphysicals + (raid_ctlr_position == 0);
 
 		/* Figure out where the LUN ID info is coming from */
 		lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
 			i, nphysicals, nlogicals, physdev_list, logdev_list);
 
 		/* skip masked non-disk devices */
-		if (MASKED_DEVICE(lunaddrbytes))
-			if (i < nphysicals + (raid_ctlr_position == 0) &&
-				NON_DISK_PHYS_DEV(lunaddrbytes))
-				continue;
+		if (MASKED_DEVICE(lunaddrbytes) && physical_device &&
+			(physdev_list->LUN[phys_dev_index].device_flags & 0x01))
+			continue;
 
 		/* Get device type, vendor, model, device id */
-		if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
-							&is_OBDR))
-			continue; /* skip it if we can't talk to it. */
+		rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
+							&is_OBDR);
+		if (rc == -ENOMEM) {
+			dev_warn(&h->pdev->dev,
+				"Out of memory, rescan deferred.\n");
+			h->drv_req_rescan = 1;
+			goto out;
+		}
+		if (rc) {
+			dev_warn(&h->pdev->dev,
+				"Inquiry failed, skipping device.\n");
+			continue;
+		}
+
+		/* Determine if this is a lun from an external target array */
+		tmpdevice->external =
+			figure_external_status(h, raid_ctlr_position, i,
+						nphysicals, nlocal_logicals);
+
 		figure_bus_target_lun(h, lunaddrbytes, tmpdevice);
 		hpsa_update_device_supports_aborts(h, tmpdevice, lunaddrbytes);
 		this_device = currentsd[ncurrent];
 
-		/*
-		 * For external target devices, we have to insert a LUN 0 which
-		 * doesn't show up in CCISS_REPORT_PHYSICAL data, but there
-		 * is nonetheless an enclosure device there.  We have to
-		 * present that otherwise linux won't find anything if
-		 * there is no lun 0.
+		/* Turn on discovery_polling if there are ext target devices.
+		 * Event-based change notification is unreliable for those.
 		 */
-		if (add_ext_target_dev(h, tmpdevice, this_device,
-				lunaddrbytes, lunzerobits,
-				&n_ext_target_devs)) {
-			ncurrent++;
-			this_device = currentsd[ncurrent];
+		if (!h->discovery_polling) {
+			if (tmpdevice->external) {
+				h->discovery_polling = 1;
+				dev_info(&h->pdev->dev,
+					"External target, activate discovery polling.\n");
+			}
 		}
 
+
 		*this_device = *tmpdevice;
+		this_device->physical_device = physical_device;
+
+		/*
+		 * Expose all devices except for physical devices that
+		 * are masked.
+		 */
+		if (MASKED_DEVICE(lunaddrbytes) && this_device->physical_device)
+			this_device->expose_device = 0;
+		else
+			this_device->expose_device = 1;
 
-		/* do not expose masked devices */
-		if (MASKED_DEVICE(lunaddrbytes) &&
-			i < nphysicals + (raid_ctlr_position == 0)) {
-			this_device->expose_state = HPSA_DO_NOT_EXPOSE;
-		} else {
-			this_device->expose_state =
-					HPSA_SG_ATTACH | HPSA_ULD_ATTACH;
-		}
+
+		/*
+		 * Get the SAS address for physical devices that are exposed.
+		 */
+		if (this_device->physical_device && this_device->expose_device)
+			hpsa_get_sas_address(h, lunaddrbytes, this_device);
 
 		switch (this_device->devtype) {
 		case TYPE_ROM:
@@ -3833,14 +4103,14 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 				ncurrent++;
 			break;
 		case TYPE_DISK:
-			if (i < nphysicals + (raid_ctlr_position == 0)) {
+			if (this_device->physical_device) {
 				/* The disk is in HBA mode. */
 				/* Never use RAID mapper in HBA mode. */
 				this_device->offload_enabled = 0;
 				hpsa_get_ioaccel_drive_info(h, this_device,
-					lunaddrbytes, id_phys);
-				hpsa_get_path_info(this_device, lunaddrbytes,
-							id_phys);
+					physdev_list, phys_dev_index, id_phys);
+				hpsa_get_path_info(this_device,
+					physdev_list, phys_dev_index, id_phys);
 			}
 			ncurrent++;
 			break;
@@ -3865,7 +4135,19 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 		if (ncurrent >= HPSA_MAX_DEVICES)
 			break;
 	}
-	adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
+
+	if (h->sas_host == NULL) {
+		int rc = 0;
+
+		rc = hpsa_add_sas_host(h);
+		if (rc) {
+			dev_warn(&h->pdev->dev,
+				"Could not add sas host %d\n", rc);
+			goto out;
+		}
+	}
+
+	adjust_hpsa_scsi_table(h, currentsd, ncurrent);
 out:
 	kfree(tmpdevice);
 	for (i = 0; i < ndev_allocated; i++)
@@ -3873,6 +4155,7 @@ out:
 	kfree(currentsd);
 	kfree(physdev_list);
 	kfree(logdev_list);
+	kfree(id_ctlr);
 	kfree(id_phys);
 }
 
@@ -3978,19 +4261,14 @@ static int fixup_ioaccel_cdb(u8 *cdb, int *cdb_len)
 	case READ_6:
 	case READ_12:
 		if (*cdb_len == 6) {
-			block = (((u32) cdb[2]) << 8) | cdb[3];
+			block = get_unaligned_be16(&cdb[2]);
 			block_cnt = cdb[4];
+			if (block_cnt == 0)
+				block_cnt = 256;
 		} else {
 			BUG_ON(*cdb_len != 12);
-			block = (((u32) cdb[2]) << 24) |
-				(((u32) cdb[3]) << 16) |
-				(((u32) cdb[4]) << 8) |
-				cdb[5];
-			block_cnt =
-				(((u32) cdb[6]) << 24) |
-				(((u32) cdb[7]) << 16) |
-				(((u32) cdb[8]) << 8) |
-				cdb[9];
+			block = get_unaligned_be32(&cdb[2]);
+			block_cnt = get_unaligned_be32(&cdb[6]);
 		}
 		if (block_cnt > 0xffff)
 			return IO_ACCEL_INELIGIBLE;
@@ -4272,6 +4550,7 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 	/* fill in sg elements */
 	if (use_sg > h->ioaccel_maxsg) {
 		cp->sg_count = 1;
+		cp->sg[0].length = cpu_to_le32(use_sg * sizeof(cp->sg[0]));
 		if (hpsa_map_ioaccel2_sg_chain_block(h, cp, c)) {
 			atomic_dec(&phys_disk->ioaccel_cmds_out);
 			scsi_dma_unmap(cmd);
@@ -4376,9 +4655,7 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 	case WRITE_6:
 		is_write = 1;
 	case READ_6:
-		first_block =
-			(((u64) cmd->cmnd[2]) << 8) |
-			cmd->cmnd[3];
+		first_block = get_unaligned_be16(&cmd->cmnd[2]);
 		block_cnt = cmd->cmnd[4];
 		if (block_cnt == 0)
 			block_cnt = 256;
@@ -4947,7 +5224,7 @@ static void hpsa_scan_start(struct Scsi_Host *sh)
 	if (unlikely(lockup_detected(h)))
 		return hpsa_scan_complete(h);
 
-	hpsa_update_scsi_devices(h, h->scsi_host->host_no);
+	hpsa_update_scsi_devices(h);
 
 	hpsa_scan_complete(h);
 }
@@ -4983,7 +5260,6 @@ static int hpsa_scan_finished(struct Scsi_Host *sh,
 static int hpsa_scsi_host_alloc(struct ctlr_info *h)
 {
 	struct Scsi_Host *sh;
-	int error;
 
 	sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h));
 	if (sh == NULL) {
@@ -5001,17 +5277,11 @@ static int hpsa_scsi_host_alloc(struct ctlr_info *h)
 	sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS;
 	sh->cmd_per_lun = sh->can_queue;
 	sh->sg_tablesize = h->maxsgentries;
+	sh->transportt = hpsa_sas_transport_template;
 	sh->hostdata[0] = (unsigned long) h;
 	sh->irq = h->intr[h->intr_mode];
 	sh->unique_id = sh->irq;
-	error = scsi_init_shared_tag_map(sh, sh->can_queue);
-	if (error) {
-		dev_err(&h->pdev->dev,
-			"%s: scsi_init_shared_tag_map failed for controller %d\n",
-			__func__, h->ctlr);
-			scsi_host_put(sh);
-			return error;
-	}
+
 	h->scsi_host = sh;
 	return 0;
 }
@@ -5167,6 +5437,7 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
 	int rc;
 	struct ctlr_info *h;
 	struct hpsa_scsi_dev_t *dev;
+	u8 reset_type;
 	char msg[48];
 
 	/* find the controller to which the command to be aborted was sent */
@@ -5205,14 +5476,25 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
 	if (is_hba_lunid(dev->scsi3addr))
 		return SUCCESS;
 
-	hpsa_show_dev_msg(KERN_WARNING, h, dev, "resetting");
+	if (is_logical_dev_addr_mode(dev->scsi3addr))
+		reset_type = HPSA_DEVICE_RESET_MSG;
+	else
+		reset_type = HPSA_PHYS_TARGET_RESET;
+
+	sprintf(msg, "resetting %s",
+		reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ");
+	hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
+
+	h->reset_in_progress = 1;
 
 	/* send a reset to the SCSI LUN which the command was sent to */
-	rc = hpsa_do_reset(h, dev, dev->scsi3addr, HPSA_RESET_TYPE_LUN,
+	rc = hpsa_do_reset(h, dev, dev->scsi3addr, reset_type,
 			   DEFAULT_REPLY_QUEUE);
-	snprintf(msg, sizeof(msg), "reset %s",
-		 rc == 0 ? "completed successfully" : "failed");
+	sprintf(msg, "reset %s %s",
+		reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ",
+		rc == 0 ? "completed successfully" : "failed");
 	hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
+	h->reset_in_progress = 0;
 	return rc == 0 ? SUCCESS : FAILED;
 }
 
@@ -6270,6 +6552,24 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 			c->Request.CDB[8] = (size >> 8) & 0xFF;
 			c->Request.CDB[9] = size & 0xFF;
 			break;
+		case BMIC_SENSE_DIAG_OPTIONS:
+			c->Request.CDBLen = 16;
+			c->Request.type_attr_dir =
+				TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+			c->Request.Timeout = 0;
+			/* Spec says this should be BMIC_WRITE */
+			c->Request.CDB[0] = BMIC_READ;
+			c->Request.CDB[6] = BMIC_SENSE_DIAG_OPTIONS;
+			break;
+		case BMIC_SET_DIAG_OPTIONS:
+			c->Request.CDBLen = 16;
+			c->Request.type_attr_dir =
+					TYPE_ATTR_DIR(cmd_type,
+						ATTR_SIMPLE, XFER_WRITE);
+			c->Request.Timeout = 0;
+			c->Request.CDB[0] = BMIC_WRITE;
+			c->Request.CDB[6] = BMIC_SET_DIAG_OPTIONS;
+			break;
 		case HPSA_CACHE_FLUSH:
 			c->Request.CDBLen = 12;
 			c->Request.type_attr_dir =
@@ -6319,6 +6619,32 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 			c->Request.CDB[7] = (size >> 16) & 0xFF;
 			c->Request.CDB[8] = (size >> 8) & 0XFF;
 			break;
+		case BMIC_SENSE_SUBSYSTEM_INFORMATION:
+			c->Request.CDBLen = 10;
+			c->Request.type_attr_dir =
+				TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+			c->Request.Timeout = 0;
+			c->Request.CDB[0] = BMIC_READ;
+			c->Request.CDB[6] = BMIC_SENSE_SUBSYSTEM_INFORMATION;
+			c->Request.CDB[7] = (size >> 16) & 0xFF;
+			c->Request.CDB[8] = (size >> 8) & 0XFF;
+			break;
+		case BMIC_IDENTIFY_CONTROLLER:
+			c->Request.CDBLen = 10;
+			c->Request.type_attr_dir =
+				TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+			c->Request.Timeout = 0;
+			c->Request.CDB[0] = BMIC_READ;
+			c->Request.CDB[1] = 0;
+			c->Request.CDB[2] = 0;
+			c->Request.CDB[3] = 0;
+			c->Request.CDB[4] = 0;
+			c->Request.CDB[5] = 0;
+			c->Request.CDB[6] = BMIC_IDENTIFY_CONTROLLER;
+			c->Request.CDB[7] = (size >> 16) & 0xFF;
+			c->Request.CDB[8] = (size >> 8) & 0XFF;
+			c->Request.CDB[9] = 0;
+			break;
 		default:
 			dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
 			BUG();
@@ -6327,6 +6653,20 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 	} else if (cmd_type == TYPE_MSG) {
 		switch (cmd) {
 
+		case  HPSA_PHYS_TARGET_RESET:
+			c->Request.CDBLen = 16;
+			c->Request.type_attr_dir =
+				TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
+			c->Request.Timeout = 0; /* Don't time out */
+			memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
+			c->Request.CDB[0] = HPSA_RESET;
+			c->Request.CDB[1] = HPSA_TARGET_RESET_TYPE;
+			/* Physical target reset needs no control bytes 4-7*/
+			c->Request.CDB[4] = 0x00;
+			c->Request.CDB[5] = 0x00;
+			c->Request.CDB[6] = 0x00;
+			c->Request.CDB[7] = 0x00;
+			break;
 		case  HPSA_DEVICE_RESET_MSG:
 			c->Request.CDBLen = 16;
 			c->Request.type_attr_dir =
@@ -6440,16 +6780,6 @@ static inline void finish_cmd(struct CommandList *c)
 		complete(c->waiting);
 }
 
-
-static inline u32 hpsa_tag_discard_error_bits(struct ctlr_info *h, u32 tag)
-{
-#define HPSA_PERF_ERROR_BITS ((1 << DIRECT_LOOKUP_SHIFT) - 1)
-#define HPSA_SIMPLE_ERROR_BITS 0x03
-	if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant)))
-		return tag & ~HPSA_SIMPLE_ERROR_BITS;
-	return tag & ~HPSA_PERF_ERROR_BITS;
-}
-
 /* process completion of an indexed ("direct lookup") command */
 static inline void process_indexed_cmd(struct ctlr_info *h,
 	u32 raw_tag)
@@ -7860,6 +8190,11 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h)
  */
 static int hpsa_ctlr_needs_rescan(struct ctlr_info *h)
 {
+	if (h->drv_req_rescan) {
+		h->drv_req_rescan = 0;
+		return 1;
+	}
+
 	if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
 		return 0;
 
@@ -7893,6 +8228,41 @@ static int hpsa_offline_devices_ready(struct ctlr_info *h)
 	return 0;
 }
 
+static int hpsa_luns_changed(struct ctlr_info *h)
+{
+	int rc = 1; /* assume there are changes */
+	struct ReportLUNdata *logdev = NULL;
+
+	/* if we can't find out if lun data has changed,
+	 * assume that it has.
+	 */
+
+	if (!h->lastlogicals)
+		goto out;
+
+	logdev = kzalloc(sizeof(*logdev), GFP_KERNEL);
+	if (!logdev) {
+		dev_warn(&h->pdev->dev,
+			"Out of memory, can't track lun changes.\n");
+		goto out;
+	}
+	if (hpsa_scsi_do_report_luns(h, 1, logdev, sizeof(*logdev), 0)) {
+		dev_warn(&h->pdev->dev,
+			"report luns failed, can't track lun changes.\n");
+		goto out;
+	}
+	if (memcmp(logdev, h->lastlogicals, sizeof(*logdev))) {
+		dev_info(&h->pdev->dev,
+			"Lun changes detected.\n");
+		memcpy(h->lastlogicals, logdev, sizeof(*logdev));
+		goto out;
+	} else
+		rc = 0; /* no changes detected. */
+out:
+	kfree(logdev);
+	return rc;
+}
+
 static void hpsa_rescan_ctlr_worker(struct work_struct *work)
 {
 	unsigned long flags;
@@ -7908,6 +8278,19 @@ static void hpsa_rescan_ctlr_worker(struct work_struct *work)
 		hpsa_ack_ctlr_events(h);
 		hpsa_scan_start(h->scsi_host);
 		scsi_host_put(h->scsi_host);
+	} else if (h->discovery_polling) {
+		hpsa_disable_rld_caching(h);
+		if (hpsa_luns_changed(h)) {
+			struct Scsi_Host *sh = NULL;
+
+			dev_info(&h->pdev->dev,
+				"driver discovery polling rescan.\n");
+			sh = scsi_host_get(h->scsi_host);
+			if (sh != NULL) {
+				hpsa_scan_start(sh);
+				scsi_host_put(sh);
+			}
+		}
 	}
 	spin_lock_irqsave(&h->lock, flags);
 	if (!h->remove_in_progress)
@@ -8148,6 +8531,8 @@ reinit_after_soft_reset:
 
 	/* Enable Accelerated IO path at driver layer */
 	h->acciopath_status = 1;
+	/* Disable discovery polling.*/
+	h->discovery_polling = 0;
 
 
 	/* Turn the interrupts on so we can service requests */
@@ -8155,6 +8540,11 @@ reinit_after_soft_reset:
 
 	hpsa_hba_inquiry(h);
 
+	h->lastlogicals = kzalloc(sizeof(*(h->lastlogicals)), GFP_KERNEL);
+	if (!h->lastlogicals)
+		dev_info(&h->pdev->dev,
+			"Can't track change to report lun data\n");
+
 	/* Monitor the controller for firmware lockups */
 	h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
 	INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
@@ -8227,6 +8617,71 @@ out:
 	kfree(flush_buf);
 }
 
+/* Make controller gather fresh report lun data each time we
+ * send down a report luns request
+ */
+static void hpsa_disable_rld_caching(struct ctlr_info *h)
+{
+	u32 *options;
+	struct CommandList *c;
+	int rc;
+
+	/* Don't bother trying to set diag options if locked up */
+	if (unlikely(h->lockup_detected))
+		return;
+
+	options = kzalloc(sizeof(*options), GFP_KERNEL);
+	if (!options) {
+		dev_err(&h->pdev->dev,
+			"Error: failed to disable rld caching, during alloc.\n");
+		return;
+	}
+
+	c = cmd_alloc(h);
+
+	/* first, get the current diag options settings */
+	if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0,
+		RAID_CTLR_LUNID, TYPE_CMD))
+		goto errout;
+
+	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+		PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+	if ((rc != 0) || (c->err_info->CommandStatus != 0))
+		goto errout;
+
+	/* Now, set the bit for disabling the RLD caching */
+	*options |= HPSA_DIAG_OPTS_DISABLE_RLD_CACHING;
+
+	if (fill_cmd(c, BMIC_SET_DIAG_OPTIONS, h, options, 4, 0,
+		RAID_CTLR_LUNID, TYPE_CMD))
+		goto errout;
+
+	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+		PCI_DMA_TODEVICE, NO_TIMEOUT);
+	if ((rc != 0)  || (c->err_info->CommandStatus != 0))
+		goto errout;
+
+	/* Now verify that it got set: */
+	if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0,
+		RAID_CTLR_LUNID, TYPE_CMD))
+		goto errout;
+
+	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+		PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+	if ((rc != 0)  || (c->err_info->CommandStatus != 0))
+		goto errout;
+
+	if (*options & HPSA_DIAG_OPTS_DISABLE_RLD_CACHING)
+		goto out;
+
+errout:
+	dev_err(&h->pdev->dev,
+			"Error: failed to disable report lun data caching.\n");
+out:
+	cmd_free(h, c);
+	kfree(options);
+}
+
 static void hpsa_shutdown(struct pci_dev *pdev)
 {
 	struct ctlr_info *h;
@@ -8292,6 +8747,7 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 	hpsa_free_performant_mode(h);			/* init_one 7 */
 	hpsa_free_sg_chain_blocks(h);			/* init_one 6 */
 	hpsa_free_cmd_pool(h);				/* init_one 5 */
+	kfree(h->lastlogicals);
 
 	/* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */
 
@@ -8304,6 +8760,9 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 	free_percpu(h->lockup_detected);		/* init_one 2 */
 	h->lockup_detected = NULL;			/* init_one 2 */
 	/* (void) pci_disable_pcie_error_reporting(pdev); */	/* init_one 1 */
+
+	hpsa_delete_sas_host(h);
+
 	kfree(h);					/* init_one 1 */
 }
 
@@ -8766,18 +9225,369 @@ static void hpsa_drain_accel_commands(struct ctlr_info *h)
 	} while (1);
 }
 
+static struct hpsa_sas_phy *hpsa_alloc_sas_phy(
+				struct hpsa_sas_port *hpsa_sas_port)
+{
+	struct hpsa_sas_phy *hpsa_sas_phy;
+	struct sas_phy *phy;
+
+	hpsa_sas_phy = kzalloc(sizeof(*hpsa_sas_phy), GFP_KERNEL);
+	if (!hpsa_sas_phy)
+		return NULL;
+
+	phy = sas_phy_alloc(hpsa_sas_port->parent_node->parent_dev,
+		hpsa_sas_port->next_phy_index);
+	if (!phy) {
+		kfree(hpsa_sas_phy);
+		return NULL;
+	}
+
+	hpsa_sas_port->next_phy_index++;
+	hpsa_sas_phy->phy = phy;
+	hpsa_sas_phy->parent_port = hpsa_sas_port;
+
+	return hpsa_sas_phy;
+}
+
+static void hpsa_free_sas_phy(struct hpsa_sas_phy *hpsa_sas_phy)
+{
+	struct sas_phy *phy = hpsa_sas_phy->phy;
+
+	sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy);
+	sas_phy_free(phy);
+	if (hpsa_sas_phy->added_to_port)
+		list_del(&hpsa_sas_phy->phy_list_entry);
+	kfree(hpsa_sas_phy);
+}
+
+static int hpsa_sas_port_add_phy(struct hpsa_sas_phy *hpsa_sas_phy)
+{
+	int rc;
+	struct hpsa_sas_port *hpsa_sas_port;
+	struct sas_phy *phy;
+	struct sas_identify *identify;
+
+	hpsa_sas_port = hpsa_sas_phy->parent_port;
+	phy = hpsa_sas_phy->phy;
+
+	identify = &phy->identify;
+	memset(identify, 0, sizeof(*identify));
+	identify->sas_address = hpsa_sas_port->sas_address;
+	identify->device_type = SAS_END_DEVICE;
+	identify->initiator_port_protocols = SAS_PROTOCOL_STP;
+	identify->target_port_protocols = SAS_PROTOCOL_STP;
+	phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+	phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+	phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN;
+	phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN;
+	phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+
+	rc = sas_phy_add(hpsa_sas_phy->phy);
+	if (rc)
+		return rc;
+
+	sas_port_add_phy(hpsa_sas_port->port, hpsa_sas_phy->phy);
+	list_add_tail(&hpsa_sas_phy->phy_list_entry,
+			&hpsa_sas_port->phy_list_head);
+	hpsa_sas_phy->added_to_port = true;
+
+	return 0;
+}
+
+static int
+	hpsa_sas_port_add_rphy(struct hpsa_sas_port *hpsa_sas_port,
+				struct sas_rphy *rphy)
+{
+	struct sas_identify *identify;
+
+	identify = &rphy->identify;
+	identify->sas_address = hpsa_sas_port->sas_address;
+	identify->initiator_port_protocols = SAS_PROTOCOL_STP;
+	identify->target_port_protocols = SAS_PROTOCOL_STP;
+
+	return sas_rphy_add(rphy);
+}
+
+static struct hpsa_sas_port
+	*hpsa_alloc_sas_port(struct hpsa_sas_node *hpsa_sas_node,
+				u64 sas_address)
+{
+	int rc;
+	struct hpsa_sas_port *hpsa_sas_port;
+	struct sas_port *port;
+
+	hpsa_sas_port = kzalloc(sizeof(*hpsa_sas_port), GFP_KERNEL);
+	if (!hpsa_sas_port)
+		return NULL;
+
+	INIT_LIST_HEAD(&hpsa_sas_port->phy_list_head);
+	hpsa_sas_port->parent_node = hpsa_sas_node;
+
+	port = sas_port_alloc_num(hpsa_sas_node->parent_dev);
+	if (!port)
+		goto free_hpsa_port;
+
+	rc = sas_port_add(port);
+	if (rc)
+		goto free_sas_port;
+
+	hpsa_sas_port->port = port;
+	hpsa_sas_port->sas_address = sas_address;
+	list_add_tail(&hpsa_sas_port->port_list_entry,
+			&hpsa_sas_node->port_list_head);
+
+	return hpsa_sas_port;
+
+free_sas_port:
+	sas_port_free(port);
+free_hpsa_port:
+	kfree(hpsa_sas_port);
+
+	return NULL;
+}
+
+static void hpsa_free_sas_port(struct hpsa_sas_port *hpsa_sas_port)
+{
+	struct hpsa_sas_phy *hpsa_sas_phy;
+	struct hpsa_sas_phy *next;
+
+	list_for_each_entry_safe(hpsa_sas_phy, next,
+			&hpsa_sas_port->phy_list_head, phy_list_entry)
+		hpsa_free_sas_phy(hpsa_sas_phy);
+
+	sas_port_delete(hpsa_sas_port->port);
+	list_del(&hpsa_sas_port->port_list_entry);
+	kfree(hpsa_sas_port);
+}
+
+static struct hpsa_sas_node *hpsa_alloc_sas_node(struct device *parent_dev)
+{
+	struct hpsa_sas_node *hpsa_sas_node;
+
+	hpsa_sas_node = kzalloc(sizeof(*hpsa_sas_node), GFP_KERNEL);
+	if (hpsa_sas_node) {
+		hpsa_sas_node->parent_dev = parent_dev;
+		INIT_LIST_HEAD(&hpsa_sas_node->port_list_head);
+	}
+
+	return hpsa_sas_node;
+}
+
+static void hpsa_free_sas_node(struct hpsa_sas_node *hpsa_sas_node)
+{
+	struct hpsa_sas_port *hpsa_sas_port;
+	struct hpsa_sas_port *next;
+
+	if (!hpsa_sas_node)
+		return;
+
+	list_for_each_entry_safe(hpsa_sas_port, next,
+			&hpsa_sas_node->port_list_head, port_list_entry)
+		hpsa_free_sas_port(hpsa_sas_port);
+
+	kfree(hpsa_sas_node);
+}
+
+static struct hpsa_scsi_dev_t
+	*hpsa_find_device_by_sas_rphy(struct ctlr_info *h,
+					struct sas_rphy *rphy)
+{
+	int i;
+	struct hpsa_scsi_dev_t *device;
+
+	for (i = 0; i < h->ndevices; i++) {
+		device = h->dev[i];
+		if (!device->sas_port)
+			continue;
+		if (device->sas_port->rphy == rphy)
+			return device;
+	}
+
+	return NULL;
+}
+
+static int hpsa_add_sas_host(struct ctlr_info *h)
+{
+	int rc;
+	struct device *parent_dev;
+	struct hpsa_sas_node *hpsa_sas_node;
+	struct hpsa_sas_port *hpsa_sas_port;
+	struct hpsa_sas_phy *hpsa_sas_phy;
+
+	parent_dev = &h->scsi_host->shost_gendev;
+
+	hpsa_sas_node = hpsa_alloc_sas_node(parent_dev);
+	if (!hpsa_sas_node)
+		return -ENOMEM;
+
+	hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, h->sas_address);
+	if (!hpsa_sas_port) {
+		rc = -ENODEV;
+		goto free_sas_node;
+	}
+
+	hpsa_sas_phy = hpsa_alloc_sas_phy(hpsa_sas_port);
+	if (!hpsa_sas_phy) {
+		rc = -ENODEV;
+		goto free_sas_port;
+	}
+
+	rc = hpsa_sas_port_add_phy(hpsa_sas_phy);
+	if (rc)
+		goto free_sas_phy;
+
+	h->sas_host = hpsa_sas_node;
+
+	return 0;
+
+free_sas_phy:
+	hpsa_free_sas_phy(hpsa_sas_phy);
+free_sas_port:
+	hpsa_free_sas_port(hpsa_sas_port);
+free_sas_node:
+	hpsa_free_sas_node(hpsa_sas_node);
+
+	return rc;
+}
+
+static void hpsa_delete_sas_host(struct ctlr_info *h)
+{
+	hpsa_free_sas_node(h->sas_host);
+}
+
+static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
+				struct hpsa_scsi_dev_t *device)
+{
+	int rc;
+	struct hpsa_sas_port *hpsa_sas_port;
+	struct sas_rphy *rphy;
+
+	hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, device->sas_address);
+	if (!hpsa_sas_port)
+		return -ENOMEM;
+
+	rphy = sas_end_device_alloc(hpsa_sas_port->port);
+	if (!rphy) {
+		rc = -ENODEV;
+		goto free_sas_port;
+	}
+
+	hpsa_sas_port->rphy = rphy;
+	device->sas_port = hpsa_sas_port;
+
+	rc = hpsa_sas_port_add_rphy(hpsa_sas_port, rphy);
+	if (rc)
+		goto free_sas_port;
+
+	return 0;
+
+free_sas_port:
+	hpsa_free_sas_port(hpsa_sas_port);
+	device->sas_port = NULL;
+
+	return rc;
+}
+
+static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device)
+{
+	if (device->sas_port) {
+		hpsa_free_sas_port(device->sas_port);
+		device->sas_port = NULL;
+	}
+}
+
+static int
+hpsa_sas_get_linkerrors(struct sas_phy *phy)
+{
+	return 0;
+}
+
+static int
+hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+{
+	return 0;
+}
+
+static int
+hpsa_sas_get_bay_identifier(struct sas_rphy *rphy)
+{
+	return -ENXIO;
+}
+
+static int
+hpsa_sas_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+	return 0;
+}
+
+static int
+hpsa_sas_phy_enable(struct sas_phy *phy, int enable)
+{
+	return 0;
+}
+
+static int
+hpsa_sas_phy_setup(struct sas_phy *phy)
+{
+	return 0;
+}
+
+static void
+hpsa_sas_phy_release(struct sas_phy *phy)
+{
+}
+
+static int
+hpsa_sas_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
+{
+	return -EINVAL;
+}
+
+/* SMP = Serial Management Protocol */
+static int
+hpsa_sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+struct request *req)
+{
+	return -EINVAL;
+}
+
+static struct sas_function_template hpsa_sas_transport_functions = {
+	.get_linkerrors = hpsa_sas_get_linkerrors,
+	.get_enclosure_identifier = hpsa_sas_get_enclosure_identifier,
+	.get_bay_identifier = hpsa_sas_get_bay_identifier,
+	.phy_reset = hpsa_sas_phy_reset,
+	.phy_enable = hpsa_sas_phy_enable,
+	.phy_setup = hpsa_sas_phy_setup,
+	.phy_release = hpsa_sas_phy_release,
+	.set_phy_speed = hpsa_sas_phy_speed,
+	.smp_handler = hpsa_sas_smp_handler,
+};
+
 /*
  *  This is it.  Register the PCI driver information for the cards we control
  *  the OS will call our registered routines when it finds one of our cards.
  */
 static int __init hpsa_init(void)
 {
-	return pci_register_driver(&hpsa_pci_driver);
+	int rc;
+
+	hpsa_sas_transport_template =
+		sas_attach_transport(&hpsa_sas_transport_functions);
+	if (!hpsa_sas_transport_template)
+		return -ENODEV;
+
+	rc = pci_register_driver(&hpsa_pci_driver);
+
+	if (rc)
+		sas_release_transport(hpsa_sas_transport_template);
+
+	return rc;
 }
 
 static void __exit hpsa_cleanup(void)
 {
 	pci_unregister_driver(&hpsa_pci_driver);
+	sas_release_transport(hpsa_sas_transport_template);
 }
 
 static void __attribute__((unused)) verify_offsets(void)
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 27debb363..ae5beda1b 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -33,12 +33,38 @@ struct access_method {
 	unsigned long (*command_completed)(struct ctlr_info *h, u8 q);
 };
 
+/* for SAS hosts and SAS expanders */
+struct hpsa_sas_node {
+	struct device *parent_dev;
+	struct list_head port_list_head;
+};
+
+struct hpsa_sas_port {
+	struct list_head port_list_entry;
+	u64 sas_address;
+	struct sas_port *port;
+	int next_phy_index;
+	struct list_head phy_list_head;
+	struct hpsa_sas_node *parent_node;
+	struct sas_rphy *rphy;
+};
+
+struct hpsa_sas_phy {
+	struct list_head phy_list_entry;
+	struct sas_phy *phy;
+	struct hpsa_sas_port *parent_port;
+	bool added_to_port;
+};
+
 struct hpsa_scsi_dev_t {
-	int devtype;
+	unsigned int devtype;
 	int bus, target, lun;		/* as presented to the OS */
 	unsigned char scsi3addr[8];	/* as presented to the HW */
+	u8 physical_device : 1;
+	u8 expose_device;
 #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
 	unsigned char device_id[16];    /* from inquiry pg. 0x83 */
+	u64 sas_address;
 	unsigned char vendor[8];        /* bytes 8-15 of inquiry data */
 	unsigned char model[16];        /* bytes 16-31 of inquiry data */
 	unsigned char raid_level;	/* from inquiry page 0xC1 */
@@ -75,11 +101,8 @@ struct hpsa_scsi_dev_t {
 	struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
 	int nphysical_disks;
 	int supports_aborts;
-#define HPSA_DO_NOT_EXPOSE	0x0
-#define HPSA_SG_ATTACH		0x1
-#define HPSA_ULD_ATTACH		0x2
-#define HPSA_SCSI_ADD		(HPSA_SG_ATTACH | HPSA_ULD_ATTACH)
-	u8 expose_state;
+	struct hpsa_sas_port *sas_port;
+	int external;   /* 1-from external array 0-not <0-unknown */
 };
 
 struct reply_queue_buffer {
@@ -136,6 +159,7 @@ struct ctlr_info {
 	char    *product_name;
 	struct pci_dev *pdev;
 	u32	board_id;
+	u64	sas_address;
 	void __iomem *vaddr;
 	unsigned long paddr;
 	int 	nr_cmds; /* Number of commands allowed on this controller */
@@ -262,7 +286,10 @@ struct ctlr_info {
 	spinlock_t offline_device_lock;
 	struct list_head offline_device_list;
 	int	acciopath_status;
+	int	drv_req_rescan;
 	int	raid_offload_debug;
+	int     discovery_polling;
+	struct  ReportLUNdata *lastlogicals;
 	int	needs_abort_tags_swizzled;
 	struct workqueue_struct *resubmit_wq;
 	struct workqueue_struct *rescan_ctlr_wq;
@@ -270,6 +297,8 @@ struct ctlr_info {
 	wait_queue_head_t abort_cmd_wait_queue;
 	wait_queue_head_t event_sync_wait_queue;
 	struct mutex reset_mutex;
+	u8 reset_in_progress;
+	struct hpsa_sas_node *sas_host;
 };
 
 struct offline_device_entry {
@@ -283,6 +312,7 @@ struct offline_device_entry {
 #define HPSA_RESET_TYPE_BUS 0x01
 #define HPSA_RESET_TYPE_TARGET 0x03
 #define HPSA_RESET_TYPE_LUN 0x04
+#define HPSA_PHYS_TARGET_RESET 0x99 /* not defined by cciss spec */
 #define HPSA_MSG_SEND_RETRY_LIMIT 10
 #define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)
 
@@ -367,6 +397,11 @@ struct offline_device_entry {
 #define IOACCEL2_INBOUND_POSTQ_64_LOW	0xd0
 #define IOACCEL2_INBOUND_POSTQ_64_HI	0xd4
 
+#define HPSA_PHYSICAL_DEVICE_BUS	0
+#define HPSA_RAID_VOLUME_BUS		1
+#define HPSA_EXTERNAL_RAID_VOLUME_BUS	2
+#define HPSA_HBA_BUS			3
+
 /*
 	Send the command to the hardware
 */
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 47c756ba8..d92ef0d35 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -260,8 +260,6 @@ struct ext_report_lun_entry {
 	u8 wwid[8];
 	u8 device_type;
 	u8 device_flags;
-#define NON_DISK_PHYS_DEV(x) ((x)[17] & 0x01)
-#define PHYS_IOACCEL(x) ((x)[17] & 0x08)
 	u8 lun_count; /* multi-lun device, how many luns */
 	u8 redundant_paths;
 	u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */
@@ -288,6 +286,11 @@ struct SenseSubsystem_info {
 #define BMIC_FLASH_FIRMWARE 0xF7
 #define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64
 #define BMIC_IDENTIFY_PHYSICAL_DEVICE 0x15
+#define BMIC_IDENTIFY_CONTROLLER 0x11
+#define BMIC_SET_DIAG_OPTIONS 0xF4
+#define BMIC_SENSE_DIAG_OPTIONS 0xF5
+#define HPSA_DIAG_OPTS_DISABLE_RLD_CACHING 0x40000000
+#define BMIC_SENSE_SUBSYSTEM_INFORMATION 0x66
 
 /* Command List Structure */
 union SCSI3Addr {
@@ -684,6 +687,16 @@ struct hpsa_pci_info {
 	u32		board_id;
 };
 
+struct bmic_identify_controller {
+	u8	configured_logical_drive_count;	/* offset 0 */
+	u8	pad1[153];
+	__le16	extended_logical_unit_count;	/* offset 154 */
+	u8	pad2[136];
+	u8	controller_mode;	/* offset 292 */
+	u8	pad3[32];
+};
+
+
 struct bmic_identify_physical_device {
 	u8    scsi_bus;          /* SCSI Bus number on controller */
 	u8    scsi_id;           /* SCSI ID on this bus */
@@ -816,5 +829,18 @@ struct bmic_identify_physical_device {
 	u8     padding[112];
 };
 
+struct bmic_sense_subsystem_info {
+	u8	primary_slot_number;
+	u8	reserved[3];
+	u8	chasis_serial_number[32];
+	u8	primary_world_wide_id[8];
+	u8	primary_array_serial_number[32]; /* NULL terminated */
+	u8	primary_cache_serial_number[32]; /* NULL terminated */
+	u8	reserved_2[8];
+	u8	secondary_array_serial_number[32];
+	u8	secondary_cache_serial_number[32];
+	u8	pad[332];
+};
+
 #pragma pack()
 #endif /* HPSA_CMD_H */
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 057d27721..6aa317c30 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -3095,7 +3095,6 @@ static struct scsi_host_template driver_template = {
 	.max_sectors = IBMVFC_MAX_SECTORS,
 	.use_clustering = ENABLE_CLUSTERING,
 	.shost_attrs = ibmvfc_attrs,
-	.use_blk_tags = 1,
 	.track_queue_depth = 1,
 };
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 6a41c36b1..adfef9db6 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -106,9 +106,9 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(IBMVSCSI_VERSION);
 
 module_param_named(max_id, max_id, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(max_id, "Largest ID value for each channel");
+MODULE_PARM_DESC(max_id, "Largest ID value for each channel [Default=64]");
 module_param_named(max_channel, max_channel, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(max_channel, "Largest channel value");
+MODULE_PARM_DESC(max_channel, "Largest channel value [Default=3]");
 module_param_named(init_timeout, init_timeout, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(init_timeout, "Initialization timeout in seconds");
 module_param_named(max_requests, max_requests, int, S_IRUGO);
@@ -2289,11 +2289,15 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 		goto init_pool_failed;
 	}
 
-	host->max_lun = 8;
+	host->max_lun = IBMVSCSI_MAX_LUN;
 	host->max_id = max_id;
 	host->max_channel = max_channel;
 	host->max_cmd_len = 16;
 
+	dev_info(dev,
+		 "Maximum ID: %d Maximum LUN: %llu Maximum Channel: %d\n",
+		 host->max_id, host->max_lun, host->max_channel);
+
 	if (scsi_add_host(hostdata->host, hostdata->dev))
 		goto add_host_failed;
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 7d64867c5..106736739 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -48,6 +48,7 @@ struct Scsi_Host;
 #define IBMVSCSI_CMDS_PER_LUN_DEFAULT 16
 #define IBMVSCSI_MAX_SECTORS_DEFAULT 256 /* 32 * 8 = default max I/O 32 pages */
 #define IBMVSCSI_MAX_CMDS_PER_LUN 64
+#define IBMVSCSI_MAX_LUN 32
 
 /* ------------------------------------------------------------
  * Data Structures
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index b62836ddb..536cd5a80 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6363,15 +6363,19 @@ static int ipr_queuecommand(struct Scsi_Host *shost,
 	ipr_cmd->scsi_cmd = scsi_cmd;
 	ipr_cmd->done = ipr_scsi_eh_done;
 
-	if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
+	if (ipr_is_gscsi(res)) {
 		if (scsi_cmd->underflow == 0)
 			ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
 
-		ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
-		if (ipr_is_gscsi(res) && res->reset_occurred) {
+		if (res->reset_occurred) {
 			res->reset_occurred = 0;
 			ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
 		}
+	}
+
+	if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
+		ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
+
 		ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR;
 		if (scsi_cmd->flags & SCMD_TAGGED)
 			ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_SIMPLE_TASK;
@@ -6502,7 +6506,6 @@ static struct scsi_host_template driver_template = {
 	.shost_attrs = ipr_ioa_attrs,
 	.sdev_attrs = ipr_dev_attrs,
 	.proc_name = IPR_NAME,
-	.use_blk_tags = 1,
 };
 
 /**
@@ -7671,6 +7674,63 @@ static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd *ipr_cmd)
 	return IPR_RC_JOB_RETURN;
 }
 
+static int ipr_ioa_service_action_failed(struct ipr_cmnd *ipr_cmd)
+{
+	u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
+
+	if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT)
+		return IPR_RC_JOB_CONTINUE;
+
+	return ipr_reset_cmd_failed(ipr_cmd);
+}
+
+static void ipr_build_ioa_service_action(struct ipr_cmnd *ipr_cmd,
+					 __be32 res_handle, u8 sa_code)
+{
+	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
+
+	ioarcb->res_handle = res_handle;
+	ioarcb->cmd_pkt.cdb[0] = IPR_IOA_SERVICE_ACTION;
+	ioarcb->cmd_pkt.cdb[1] = sa_code;
+	ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
+}
+
+/**
+ * ipr_ioafp_set_caching_parameters - Issue Set Cache parameters service
+ * action
+ *
+ * Return value:
+ *	none
+ **/
+static int ipr_ioafp_set_caching_parameters(struct ipr_cmnd *ipr_cmd)
+{
+	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+	struct ipr_inquiry_pageC4 *pageC4 = &ioa_cfg->vpd_cbs->pageC4_data;
+
+	ENTER;
+
+	ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg;
+
+	if (pageC4->cache_cap[0] & IPR_CAP_SYNC_CACHE) {
+		ipr_build_ioa_service_action(ipr_cmd,
+					     cpu_to_be32(IPR_IOA_RES_HANDLE),
+					     IPR_IOA_SA_CHANGE_CACHE_PARAMS);
+
+		ioarcb->cmd_pkt.cdb[2] = 0x40;
+
+		ipr_cmd->job_step_failed = ipr_ioa_service_action_failed;
+		ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
+			   IPR_SET_SUP_DEVICE_TIMEOUT);
+
+		LEAVE;
+		return IPR_RC_JOB_RETURN;
+	}
+
+	LEAVE;
+	return IPR_RC_JOB_CONTINUE;
+}
+
 /**
  * ipr_ioafp_inquiry - Send an Inquiry to the adapter.
  * @ipr_cmd:	ipr command struct
@@ -7722,6 +7782,39 @@ static int ipr_inquiry_page_supported(struct ipr_inquiry_page0 *page0, u8 page)
 }
 
 /**
+ * ipr_ioafp_pageC4_inquiry - Send a Page 0xC4 Inquiry to the adapter.
+ * @ipr_cmd:	ipr command struct
+ *
+ * This function sends a Page 0xC4 inquiry to the adapter
+ * to retrieve software VPD information.
+ *
+ * Return value:
+ *	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
+ **/
+static int ipr_ioafp_pageC4_inquiry(struct ipr_cmnd *ipr_cmd)
+{
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+	struct ipr_inquiry_page0 *page0 = &ioa_cfg->vpd_cbs->page0_data;
+	struct ipr_inquiry_pageC4 *pageC4 = &ioa_cfg->vpd_cbs->pageC4_data;
+
+	ENTER;
+	ipr_cmd->job_step = ipr_ioafp_set_caching_parameters;
+	memset(pageC4, 0, sizeof(*pageC4));
+
+	if (ipr_inquiry_page_supported(page0, 0xC4)) {
+		ipr_ioafp_inquiry(ipr_cmd, 1, 0xC4,
+				  (ioa_cfg->vpd_cbs_dma
+				   + offsetof(struct ipr_misc_cbs,
+					      pageC4_data)),
+				  sizeof(struct ipr_inquiry_pageC4));
+		return IPR_RC_JOB_RETURN;
+	}
+
+	LEAVE;
+	return IPR_RC_JOB_CONTINUE;
+}
+
+/**
  * ipr_ioafp_cap_inquiry - Send a Page 0xD0 Inquiry to the adapter.
  * @ipr_cmd:	ipr command struct
  *
@@ -7738,7 +7831,7 @@ static int ipr_ioafp_cap_inquiry(struct ipr_cmnd *ipr_cmd)
 	struct ipr_inquiry_cap *cap = &ioa_cfg->vpd_cbs->cap;
 
 	ENTER;
-	ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg;
+	ipr_cmd->job_step = ipr_ioafp_pageC4_inquiry;
 	memset(cap, 0, sizeof(*cap));
 
 	if (ipr_inquiry_page_supported(page0, 0xD0)) {
@@ -8277,6 +8370,42 @@ static int ipr_reset_get_unit_check_job(struct ipr_cmnd *ipr_cmd)
 	return IPR_RC_JOB_RETURN;
 }
 
+static int ipr_dump_mailbox_wait(struct ipr_cmnd *ipr_cmd)
+{
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+
+	ENTER;
+
+	if (ioa_cfg->sdt_state != GET_DUMP)
+		return IPR_RC_JOB_RETURN;
+
+	if (!ioa_cfg->sis64 || !ipr_cmd->u.time_left ||
+	    (readl(ioa_cfg->regs.sense_interrupt_reg) &
+	     IPR_PCII_MAILBOX_STABLE)) {
+
+		if (!ipr_cmd->u.time_left)
+			dev_err(&ioa_cfg->pdev->dev,
+				"Timed out waiting for Mailbox register.\n");
+
+		ioa_cfg->sdt_state = READ_DUMP;
+		ioa_cfg->dump_timeout = 0;
+		if (ioa_cfg->sis64)
+			ipr_reset_start_timer(ipr_cmd, IPR_SIS64_DUMP_TIMEOUT);
+		else
+			ipr_reset_start_timer(ipr_cmd, IPR_SIS32_DUMP_TIMEOUT);
+		ipr_cmd->job_step = ipr_reset_wait_for_dump;
+		schedule_work(&ioa_cfg->work_q);
+
+	} else {
+		ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT;
+		ipr_reset_start_timer(ipr_cmd,
+				      IPR_CHECK_FOR_RESET_TIMEOUT);
+	}
+
+	LEAVE;
+	return IPR_RC_JOB_RETURN;
+}
+
 /**
  * ipr_reset_restore_cfg_space - Restore PCI config space.
  * @ipr_cmd:	ipr command struct
@@ -8326,20 +8455,11 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
 
 	if (ioa_cfg->in_ioa_bringdown) {
 		ipr_cmd->job_step = ipr_ioa_bringdown_done;
+	} else if (ioa_cfg->sdt_state == GET_DUMP) {
+		ipr_cmd->job_step = ipr_dump_mailbox_wait;
+		ipr_cmd->u.time_left = IPR_WAIT_FOR_MAILBOX;
 	} else {
 		ipr_cmd->job_step = ipr_reset_enable_ioa;
-
-		if (GET_DUMP == ioa_cfg->sdt_state) {
-			ioa_cfg->sdt_state = READ_DUMP;
-			ioa_cfg->dump_timeout = 0;
-			if (ioa_cfg->sis64)
-				ipr_reset_start_timer(ipr_cmd, IPR_SIS64_DUMP_TIMEOUT);
-			else
-				ipr_reset_start_timer(ipr_cmd, IPR_SIS32_DUMP_TIMEOUT);
-			ipr_cmd->job_step = ipr_reset_wait_for_dump;
-			schedule_work(&ioa_cfg->work_q);
-			return IPR_RC_JOB_RETURN;
-		}
 	}
 
 	LEAVE;
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index e4fb17a58..a34c7a5a9 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -39,8 +39,8 @@
 /*
  * Literals
  */
-#define IPR_DRIVER_VERSION "2.6.2"
-#define IPR_DRIVER_DATE "(June 11, 2015)"
+#define IPR_DRIVER_VERSION "2.6.3"
+#define IPR_DRIVER_DATE "(October 17, 2015)"
 
 /*
  * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -216,6 +216,10 @@
 #define IPR_SET_ALL_SUPPORTED_DEVICES			0x80
 #define IPR_IOA_SHUTDOWN				0xF7
 #define	IPR_WR_BUF_DOWNLOAD_AND_SAVE			0x05
+#define IPR_IOA_SERVICE_ACTION				0xD2
+
+/* IOA Service Actions */
+#define IPR_IOA_SA_CHANGE_CACHE_PARAMS			0x14
 
 /*
  * Timeouts
@@ -279,6 +283,9 @@
 #define IPR_IPL_INIT_STAGE_TIME_MASK			0x0000ffff
 #define IPR_PCII_IPL_STAGE_CHANGE			(0x80000000 >> 0)
 
+#define IPR_PCII_MAILBOX_STABLE				(0x80000000 >> 4)
+#define IPR_WAIT_FOR_MAILBOX				(2 * HZ)
+
 #define IPR_PCII_IOA_TRANS_TO_OPER			(0x80000000 >> 0)
 #define IPR_PCII_IOARCB_XFER_FAILED			(0x80000000 >> 3)
 #define IPR_PCII_IOA_UNIT_CHECKED			(0x80000000 >> 4)
@@ -846,6 +853,16 @@ struct ipr_inquiry_page0 {
 	u8 page[IPR_INQUIRY_PAGE0_ENTRIES];
 }__attribute__((packed));
 
+struct ipr_inquiry_pageC4 {
+	u8 peri_qual_dev_type;
+	u8 page_code;
+	u8 reserved1;
+	u8 len;
+	u8 cache_cap[4];
+#define IPR_CAP_SYNC_CACHE		0x08
+	u8 reserved2[20];
+} __packed;
+
 struct ipr_hostrcb_device_data_entry {
 	struct ipr_vpd vpd;
 	struct ipr_res_addr dev_res_addr;
@@ -1319,6 +1336,7 @@ struct ipr_misc_cbs {
 	struct ipr_inquiry_page0 page0_data;
 	struct ipr_inquiry_page3 page3_data;
 	struct ipr_inquiry_cap cap;
+	struct ipr_inquiry_pageC4 pageC4_data;
 	struct ipr_mode_pages mode_pages;
 	struct ipr_supported_device supp_dev;
 };
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 0dfcabe3c..77128d680 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -170,7 +170,6 @@ static struct scsi_host_template isci_sht = {
 	.target_destroy			= sas_target_destroy,
 	.ioctl				= sas_ioctl,
 	.shost_attrs			= isci_host_attrs,
-	.use_blk_tags			= 1,
 	.track_queue_depth		= 1,
 };
 
@@ -272,11 +271,11 @@ static void isci_unregister(struct isci_host *isci_host)
 	if (!isci_host)
 		return;
 
+	shost = to_shost(isci_host);
+	scsi_remove_host(shost);
 	sas_unregister_ha(&isci_host->sas_ha);
 
-	shost = to_shost(isci_host);
 	sas_remove_host(shost);
-	scsi_remove_host(shost);
 	scsi_host_put(shost);
 }
 
diff --git a/drivers/scsi/libfc/fc_npiv.c b/drivers/scsi/libfc/fc_npiv.c
index 9fbf78ed8..c168321b5 100644
--- a/drivers/scsi/libfc/fc_npiv.c
+++ b/drivers/scsi/libfc/fc_npiv.c
@@ -25,7 +25,7 @@
 #include <linux/export.h>
 
 /**
- * fc_vport_create() - Create a new NPIV vport instance
+ * libfc_vport_create() - Create a new NPIV vport instance
  * @vport: fc_vport structure from scsi_transport_fc
  * @privsize: driver private data size to allocate along with the Scsi_Host
  */
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index a5a56fa31..ceee9a3fd 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -495,15 +495,17 @@ struct unsol_rcv_ct_ctx {
 #define LPFC_USER_LINK_SPEED_8G		8	/* 8 Gigabaud */
 #define LPFC_USER_LINK_SPEED_10G	10	/* 10 Gigabaud */
 #define LPFC_USER_LINK_SPEED_16G	16	/* 16 Gigabaud */
-#define LPFC_USER_LINK_SPEED_MAX	LPFC_USER_LINK_SPEED_16G
-#define LPFC_USER_LINK_SPEED_BITMAP ((1 << LPFC_USER_LINK_SPEED_16G) | \
+#define LPFC_USER_LINK_SPEED_32G	32	/* 32 Gigabaud */
+#define LPFC_USER_LINK_SPEED_MAX	LPFC_USER_LINK_SPEED_32G
+#define LPFC_USER_LINK_SPEED_BITMAP  ((1ULL << LPFC_USER_LINK_SPEED_32G) | \
+				     (1 << LPFC_USER_LINK_SPEED_16G) | \
 				     (1 << LPFC_USER_LINK_SPEED_10G) | \
 				     (1 << LPFC_USER_LINK_SPEED_8G) | \
 				     (1 << LPFC_USER_LINK_SPEED_4G) | \
 				     (1 << LPFC_USER_LINK_SPEED_2G) | \
 				     (1 << LPFC_USER_LINK_SPEED_1G) | \
 				     (1 << LPFC_USER_LINK_SPEED_AUTO))
-#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16"
+#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16, 32"
 
 enum nemb_type {
 	nemb_mse = 1,
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index d65bd178d..f6446d759 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1642,8 +1642,6 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 	struct Scsi_Host  *shost = class_to_shost(dev);\
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
 	struct lpfc_hba   *phba = vport->phba;\
-	uint val = 0;\
-	val = phba->cfg_##attr;\
 	return snprintf(buf, PAGE_SIZE, "%d\n",\
 			phba->cfg_##attr);\
 }
@@ -1808,8 +1806,6 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 { \
 	struct Scsi_Host  *shost = class_to_shost(dev);\
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
-	uint val = 0;\
-	val = vport->cfg_##attr;\
 	return snprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_##attr);\
 }
 
@@ -1835,8 +1831,6 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 { \
 	struct Scsi_Host  *shost = class_to_shost(dev);\
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
-	uint val = 0;\
-	val = vport->cfg_##attr;\
 	return snprintf(buf, PAGE_SIZE, "%#x\n", vport->cfg_##attr);\
 }
 
@@ -3282,15 +3276,20 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr,
 
 	if (val >= 0 && val <= 6) {
 		prev_val = phba->cfg_topology;
-		phba->cfg_topology = val;
 		if (phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G &&
 			val == 4) {
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
 				"3113 Loop mode not supported at speed %d\n",
-				phba->cfg_link_speed);
-			phba->cfg_topology = prev_val;
+				val);
 			return -EINVAL;
 		}
+		if (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC &&
+			val == 4) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+				"3114 Loop mode not supported\n");
+			return -EINVAL;
+		}
+		phba->cfg_topology = val;
 		if (nolip)
 			return strlen(buf);
 
@@ -3731,7 +3730,8 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
 	    ((val == LPFC_USER_LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
 	    ((val == LPFC_USER_LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) ||
 	    ((val == LPFC_USER_LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)) ||
-	    ((val == LPFC_USER_LINK_SPEED_16G) && !(phba->lmt & LMT_16Gb))) {
+	    ((val == LPFC_USER_LINK_SPEED_16G) && !(phba->lmt & LMT_16Gb)) ||
+	    ((val == LPFC_USER_LINK_SPEED_32G) && !(phba->lmt & LMT_32Gb))) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"2879 lpfc_link_speed attribute cannot be set "
 				"to %d. Speed is not supported by this port.\n",
@@ -5267,6 +5267,9 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
 		case LPFC_LINK_SPEED_16GHZ:
 			fc_host_speed(shost) = FC_PORTSPEED_16GBIT;
 			break;
+		case LPFC_LINK_SPEED_32GHZ:
+			fc_host_speed(shost) = FC_PORTSPEED_32GBIT;
+			break;
 		default:
 			fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
 			break;
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index b70506807..05dcc2abd 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -904,7 +904,6 @@ lpfc_bsg_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 {
 	uint32_t evt_req_id = 0;
 	uint32_t cmd;
-	uint32_t len;
 	struct lpfc_dmabuf *dmabuf = NULL;
 	struct lpfc_bsg_event *evt;
 	struct event_data *evt_dat = NULL;
@@ -946,7 +945,6 @@ lpfc_bsg_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	ct_req = (struct lpfc_sli_ct_request *)dmabuf->virt;
 	evt_req_id = ct_req->FsType;
 	cmd = ct_req->CommandResponse.bits.CmdRsp;
-	len = ct_req->CommandResponse.bits.Size;
 	if (!(phba->sli3_options & LPFC_SLI3_HBQ_ENABLED))
 		lpfc_sli_ringpostbuf_put(phba, pring, dmabuf);
 
@@ -2988,7 +2986,6 @@ lpfc_bsg_diag_loopback_run(struct fc_bsg_job *job)
 {
 	struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
 	struct lpfc_hba *phba = vport->phba;
-	struct diag_mode_test *diag_mode;
 	struct lpfc_bsg_event *evt;
 	struct event_data *evdat;
 	struct lpfc_sli *psli = &phba->sli;
@@ -3031,8 +3028,6 @@ lpfc_bsg_diag_loopback_run(struct fc_bsg_job *job)
 		rc = -EINVAL;
 		goto loopback_test_exit;
 	}
-	diag_mode = (struct diag_mode_test *)
-		job->request->rqst_data.h_vendor.vendor_cmd;
 
 	if ((phba->link_state == LPFC_HBA_ERROR) ||
 	    (psli->sli_flag & LPFC_BLOCK_MGMT_IO) ||
@@ -3293,7 +3288,6 @@ lpfc_bsg_get_dfc_rev(struct fc_bsg_job *job)
 {
 	struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata;
 	struct lpfc_hba *phba = vport->phba;
-	struct get_mgmt_rev *event_req;
 	struct get_mgmt_rev_reply *event_reply;
 	int rc = 0;
 
@@ -3306,9 +3300,6 @@ lpfc_bsg_get_dfc_rev(struct fc_bsg_job *job)
 		goto job_error;
 	}
 
-	event_req = (struct get_mgmt_rev *)
-		job->request->rqst_data.h_vendor.vendor_cmd;
-
 	event_reply = (struct get_mgmt_rev_reply *)
 		job->reply->reply_data.vendor_reply.vendor_rsp;
 
@@ -4348,7 +4339,6 @@ static int
 lpfc_bsg_write_ebuf_set(struct lpfc_hba *phba, struct fc_bsg_job *job,
 			struct lpfc_dmabuf *dmabuf)
 {
-	struct lpfc_sli_config_mbox *sli_cfg_mbx;
 	struct bsg_job_data *dd_data = NULL;
 	LPFC_MBOXQ_t *pmboxq = NULL;
 	MAILBOX_t *pmb;
@@ -4362,9 +4352,6 @@ lpfc_bsg_write_ebuf_set(struct lpfc_hba *phba, struct fc_bsg_job *job,
 	phba->mbox_ext_buf_ctx.seqNum++;
 	nemb_tp = phba->mbox_ext_buf_ctx.nembType;
 
-	sli_cfg_mbx = (struct lpfc_sli_config_mbox *)
-			phba->mbox_ext_buf_ctx.mbx_dmabuf->virt;
-
 	dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
 	if (!dd_data) {
 		rc = -ENOMEM;
@@ -4606,7 +4593,6 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 	uint32_t transmit_length, receive_length, mode;
 	struct lpfc_mbx_sli4_config *sli4_config;
 	struct lpfc_mbx_nembed_cmd *nembed_sge;
-	struct mbox_header *header;
 	struct ulp_bde64 *bde;
 	uint8_t *ext = NULL;
 	int rc = 0;
@@ -4804,8 +4790,6 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 				/* rebuild the command for sli4 using our
 				 * own buffers like we do for biu diags
 				 */
-				header = (struct mbox_header *)
-						&pmb->un.varWords[0];
 				nembed_sge = (struct lpfc_mbx_nembed_cmd *)
 						&pmb->un.varWords[0];
 				receive_length = nembed_sge->sge[0].length;
@@ -5048,7 +5032,6 @@ lpfc_menlo_cmd(struct fc_bsg_job *job)
 	IOCB_t *cmd;
 	int rc = 0;
 	struct menlo_command *menlo_cmd;
-	struct menlo_response *menlo_resp;
 	struct lpfc_dmabuf *bmp = NULL, *cmp = NULL, *rmp = NULL;
 	int request_nseg;
 	int reply_nseg;
@@ -5088,9 +5071,6 @@ lpfc_menlo_cmd(struct fc_bsg_job *job)
 	menlo_cmd = (struct menlo_command *)
 		job->request->rqst_data.h_vendor.vendor_cmd;
 
-	menlo_resp = (struct menlo_response *)
-		job->reply->reply_data.vendor_reply.vendor_rsp;
-
 	/* allocate our bsg tracking structure */
 	dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL);
 	if (!dd_data) {
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index af129966b..8fded1f76 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -55,6 +55,7 @@
 #define HBA_PORTSPEED_10GBIT		0x0004	/* 10 GBit/sec */
 #define HBA_PORTSPEED_8GBIT		0x0010	/* 8 GBit/sec */
 #define HBA_PORTSPEED_16GBIT		0x0020	/* 16 GBit/sec */
+#define HBA_PORTSPEED_32GBIT		0x0040  /* 32 GBit/sec */
 #define HBA_PORTSPEED_UNKNOWN		0x0800	/* Unknown */
 
 #define FOURBYTES	4
@@ -575,7 +576,6 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	struct lpfc_vport *vport = cmdiocb->vport;
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	IOCB_t *irsp;
-	struct lpfc_dmabuf *bmp;
 	struct lpfc_dmabuf *outp;
 	struct lpfc_sli_ct_request *CTrsp;
 	struct lpfc_nodelist *ndlp;
@@ -588,7 +588,6 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	cmdiocb->context_un.rsp_iocb = rspiocb;
 
 	outp = (struct lpfc_dmabuf *) cmdiocb->context2;
-	bmp = (struct lpfc_dmabuf *) cmdiocb->context3;
 	irsp = &rspiocb->iocb;
 
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
@@ -1733,12 +1732,9 @@ hba_out:
 	case SLI_MGMT_RPRT:
 	case SLI_MGMT_RPA:
 		{
-			lpfc_vpd_t *vp;
 			struct serv_parm *hsp;
 			int len = 0;
 
-			vp = &phba->vpd;
-
 			if (cmdcode == SLI_MGMT_RPRT) {
 				rh = (struct lpfc_fdmi_reg_hba *)
 					&CtReq->un.PortID;
@@ -1778,6 +1774,8 @@ hba_out:
 			ad->AttrType = cpu_to_be16(RPRT_SUPPORTED_SPEED);
 			ad->AttrLen = cpu_to_be16(FOURBYTES + 4);
 			ae->un.SupportSpeed = 0;
+			if (phba->lmt & LMT_32Gb)
+				ae->un.SupportSpeed |= HBA_PORTSPEED_32GBIT;
 			if (phba->lmt & LMT_16Gb)
 				ae->un.SupportSpeed |= HBA_PORTSPEED_16GBIT;
 			if (phba->lmt & LMT_10Gb)
@@ -1821,6 +1819,9 @@ hba_out:
 			case LPFC_LINK_SPEED_16GHZ:
 				ae->un.PortSpeed = HBA_PORTSPEED_16GBIT;
 				break;
+			case LPFC_LINK_SPEED_32GHZ:
+				ae->un.PortSpeed = HBA_PORTSPEED_32GBIT;
+				break;
 			default:
 				ae->un.PortSpeed = HBA_PORTSPEED_UNKNOWN;
 				break;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 36bf58ba7..b6fa257ea 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -457,11 +457,9 @@ lpfc_issue_reg_vfi(struct lpfc_vport *vport)
 	struct lpfc_hba  *phba = vport->phba;
 	LPFC_MBOXQ_t *mboxq;
 	struct lpfc_nodelist *ndlp;
-	struct serv_parm *sp;
 	struct lpfc_dmabuf *dmabuf;
 	int rc = 0;
 
-	sp = &phba->fc_fabparam;
 	/* move forward in case of SLI4 FC port loopback test and pt2pt mode */
 	if ((phba->sli_rev == LPFC_SLI_REV4) &&
 	    !(phba->link_flag & LS_LOOPBACK_MODE) &&
@@ -1028,9 +1026,11 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 stop_rr_fcf_flogi:
 		/* FLOGI failure */
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
-				"2858 FLOGI failure Status:x%x/x%x TMO:x%x\n",
+				"2858 FLOGI failure Status:x%x/x%x TMO:x%x "
+				"Data x%x x%x\n",
 				irsp->ulpStatus, irsp->un.ulpWord[4],
-				irsp->ulpTimeout);
+				irsp->ulpTimeout, phba->hba_flag,
+				phba->fcf.fcf_flag);
 
 		/* Check for retry */
 		if (lpfc_els_retry(phba, cmdiocb, rspiocb))
@@ -1154,6 +1154,9 @@ stop_rr_fcf_flogi:
 	}
 
 flogifail:
+	spin_lock_irq(&phba->hbalock);
+	phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
+	spin_unlock_irq(&phba->hbalock);
 	lpfc_nlp_put(ndlp);
 
 	if (!lpfc_error_lost_link(irsp)) {
@@ -1205,14 +1208,11 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	struct serv_parm *sp;
 	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli_ring *pring;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	uint32_t tmo;
 	int rc;
 
-	pring = &phba->sli.ring[LPFC_ELS_RING];
-
 	cmdsize = (sizeof(uint32_t) + sizeof(struct serv_parm));
 	elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
 				     ndlp->nlp_DID, ELS_CMD_FLOGI);
@@ -1454,8 +1454,6 @@ lpfc_initial_fdisc(struct lpfc_vport *vport)
 void
 lpfc_more_plogi(struct lpfc_vport *vport)
 {
-	int sentplogi;
-
 	if (vport->num_disc_nodes)
 		vport->num_disc_nodes--;
 
@@ -1468,7 +1466,7 @@ lpfc_more_plogi(struct lpfc_vport *vport)
 	/* Check to see if there are more PLOGIs to be sent */
 	if (vport->fc_flag & FC_NLP_MORE)
 		/* go thru NPR nodes and issue any remaining ELS PLOGIs */
-		sentplogi = lpfc_els_disc_plogi(vport);
+		lpfc_els_disc_plogi(vport);
 
 	return;
 }
@@ -1956,16 +1954,12 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
 {
 	struct lpfc_hba  *phba = vport->phba;
 	struct serv_parm *sp;
-	IOCB_t *icmd;
 	struct lpfc_nodelist *ndlp;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int ret;
 
-	psli = &phba->sli;
-
 	ndlp = lpfc_findnode_did(vport, did);
 	if (ndlp && !NLP_CHK_NODE_ACT(ndlp))
 		ndlp = NULL;
@@ -1977,7 +1971,6 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
 	if (!elsiocb)
 		return 1;
 
-	icmd = &elsiocb->iocb;
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
 
 	/* For PLOGI request, remainder of payload is service parameters */
@@ -2034,10 +2027,8 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	struct lpfc_vport *vport = cmdiocb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	IOCB_t *irsp;
-	struct lpfc_sli *psli;
 	struct lpfc_nodelist *ndlp;
 
-	psli = &phba->sli;
 	/* we pass cmdiocb to state machine which needs rspiocb as well */
 	cmdiocb->context_un.rsp_iocb = rspiocb;
 
@@ -2117,7 +2108,6 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_hba *phba = vport->phba;
 	PRLI *npr;
-	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
@@ -2128,7 +2118,6 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (!elsiocb)
 		return 1;
 
-	icmd = &elsiocb->iocb;
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
 
 	/* For PRLI request, remainder of payload is service parameters */
@@ -2413,7 +2402,6 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_hba  *phba = vport->phba;
 	ADISC *ap;
-	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
@@ -2424,7 +2412,6 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (!elsiocb)
 		return 1;
 
-	icmd = &elsiocb->iocb;
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
 
 	/* For ADISC request, remainder of payload is service parameters */
@@ -2478,12 +2465,10 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	struct lpfc_vport *vport = ndlp->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	IOCB_t *irsp;
-	struct lpfc_sli *psli;
 	struct lpfcMboxq *mbox;
 	unsigned long flags;
 	uint32_t skip_recovery = 0;
 
-	psli = &phba->sli;
 	/* we pass cmdiocb to state machine which needs rspiocb as well */
 	cmdiocb->context_un.rsp_iocb = rspiocb;
 
@@ -2609,7 +2594,6 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_hba  *phba = vport->phba;
-	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
@@ -2628,7 +2612,6 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (!elsiocb)
 		return 1;
 
-	icmd = &elsiocb->iocb;
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
 	*((uint32_t *) (pcmd)) = ELS_CMD_LOGO;
 	pcmd += sizeof(uint32_t);
@@ -2742,14 +2725,11 @@ int
 lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 {
 	struct lpfc_hba  *phba = vport->phba;
-	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	struct lpfc_nodelist *ndlp;
 
-	psli = &phba->sli;
 	cmdsize = (sizeof(uint32_t) + sizeof(SCR));
 
 	ndlp = lpfc_findnode_did(vport, nportid);
@@ -2776,7 +2756,6 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 		return 1;
 	}
 
-	icmd = &elsiocb->iocb;
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
 
 	*((uint32_t *) (pcmd)) = ELS_CMD_SCR;
@@ -2836,9 +2815,7 @@ static int
 lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 {
 	struct lpfc_hba  *phba = vport->phba;
-	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli;
 	FARP *fp;
 	uint8_t *pcmd;
 	uint32_t *lp;
@@ -2846,7 +2823,6 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 	struct lpfc_nodelist *ondlp;
 	struct lpfc_nodelist *ndlp;
 
-	psli = &phba->sli;
 	cmdsize = (sizeof(uint32_t) + sizeof(FARP));
 
 	ndlp = lpfc_findnode_did(vport, nportid);
@@ -2872,7 +2848,6 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 		return 1;
 	}
 
-	icmd = &elsiocb->iocb;
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
 
 	*((uint32_t *) (pcmd)) = ELS_CMD_FARPR;
@@ -3922,13 +3897,11 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 	ELS_PKT *els_pkt_ptr;
 
-	psli = &phba->sli;
 	oldcmd = &oldiocb->iocb;
 
 	switch (flag) {
@@ -4061,12 +4034,10 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
-	psli = &phba->sli;
 	cmdsize = 2 * sizeof(uint32_t);
 	elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
 				     ndlp->nlp_DID, ELS_CMD_LS_RJT);
@@ -4212,13 +4183,10 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
-	psli = &phba->sli;
-
 	cmdsize = sizeof(uint32_t) + sizeof(PRLI);
 	elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
 		ndlp->nlp_DID, (ELS_CMD_ACC | (ELS_CMD_PRLI & ~ELS_RSP_MASK)));
@@ -4315,12 +4283,10 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
 	RNID *rn;
 	IOCB_t *icmd, *oldcmd;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
-	psli = &phba->sli;
 	cmdsize = sizeof(uint32_t) + sizeof(uint32_t)
 					+ (2 * sizeof(struct lpfc_name));
 	if (format)
@@ -4447,12 +4413,10 @@ lpfc_els_rsp_echo_acc(struct lpfc_vport *vport, uint8_t *data,
 {
 	struct lpfc_hba  *phba = vport->phba;
 	struct lpfc_iocbq *elsiocb;
-	struct lpfc_sli *psli;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
 
-	psli = &phba->sli;
 	cmdsize = oldiocb->iocb.unsli3.rcvsli3.acc_len;
 
 	/* The accumulated length can exceed the BPL_SIZE.  For
@@ -4746,6 +4710,8 @@ lpfc_rdp_res_speed(struct fc_rdp_port_speed_desc *desc, struct lpfc_hba *phba)
 
 	desc->info.port_speed.speed = cpu_to_be16(rdp_speed);
 
+	if (phba->lmt & LMT_32Gb)
+		rdp_cap |= RDP_PS_32GB;
 	if (phba->lmt & LMT_16Gb)
 		rdp_cap |= RDP_PS_16GB;
 	if (phba->lmt & LMT_10Gb)
@@ -5181,14 +5147,12 @@ lpfc_els_rcv_lcb(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 {
 	struct lpfc_hba *phba = vport->phba;
 	struct lpfc_dmabuf *pcmd;
-	IOCB_t *icmd;
 	uint8_t *lp;
 	struct fc_lcb_request_frame *beacon;
 	struct lpfc_lcb_context *lcb_context;
 	uint8_t state, rjt_err;
 	struct ls_rjt stat;
 
-	icmd = &cmdiocb->iocb;
 	pcmd = (struct lpfc_dmabuf *)cmdiocb->context2;
 	lp = (uint8_t *)pcmd->virt;
 	beacon = (struct fc_lcb_request_frame *)pcmd->virt;
@@ -5209,7 +5173,6 @@ lpfc_els_rcv_lcb(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 		rjt_err = LSRJT_CMD_UNSUPPORTED;
 		goto rjt;
 	}
-	lcb_context = kmalloc(sizeof(struct lpfc_lcb_context), GFP_KERNEL);
 
 	if (phba->hba_flag & HBA_FCOE_MODE) {
 		rjt_err = LSRJT_CMD_UNSUPPORTED;
@@ -5240,6 +5203,12 @@ lpfc_els_rcv_lcb(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 		goto rjt;
 	}
 
+	lcb_context = kmalloc(sizeof(*lcb_context), GFP_KERNEL);
+	if (!lcb_context) {
+		rjt_err = LSRJT_UNABLE_TPC;
+		goto rjt;
+	}
+
 	state = (beacon->lcb_sub_command == LPFC_LCB_ON) ? 1 : 0;
 	lcb_context->sub_command = beacon->lcb_sub_command;
 	lcb_context->type = beacon->lcb_type;
@@ -5250,6 +5219,7 @@ lpfc_els_rcv_lcb(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 	if (lpfc_sli4_set_beacon(vport, lcb_context, state)) {
 		lpfc_printf_vlog(ndlp->vport, KERN_ERR,
 				 LOG_ELS, "0193 failed to send mail box");
+		kfree(lcb_context);
 		lpfc_nlp_put(ndlp);
 		rjt_err = LSRJT_UNABLE_TPC;
 		goto rjt;
@@ -5444,7 +5414,7 @@ lpfc_send_rscn_event(struct lpfc_vport *vport,
 
 	fc_host_post_vendor_event(shost,
 		fc_get_event_number(),
-		sizeof(struct lpfc_els_event_header) + payload_len,
+		sizeof(struct lpfc_rscn_event_header) + payload_len,
 		(char *)rscn_event_data,
 		LPFC_NL_VENDOR_ID);
 
@@ -5481,13 +5451,11 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 	struct lpfc_hba  *phba = vport->phba;
 	struct lpfc_dmabuf *pcmd;
 	uint32_t *lp, *datap;
-	IOCB_t *icmd;
 	uint32_t payload_len, length, nportid, *cmd;
 	int rscn_cnt;
 	int rscn_id = 0, hba_id = 0;
 	int i;
 
-	icmd = &cmdiocb->iocb;
 	pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
 	lp = (uint32_t *) pcmd->virt;
 
@@ -5893,6 +5861,13 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 		return 1;
 	}
 
+	/* send our FLOGI first */
+	if (vport->port_state < LPFC_FLOGI) {
+		vport->fc_myDID = 0;
+		lpfc_initial_flogi(vport);
+		vport->fc_myDID = Fabric_DID;
+	}
+
 	/* Send back ACC */
 	lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, NULL);
 
@@ -5943,12 +5918,10 @@ lpfc_els_rcv_rnid(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 {
 	struct lpfc_dmabuf *pcmd;
 	uint32_t *lp;
-	IOCB_t *icmd;
 	RNID *rn;
 	struct ls_rjt stat;
 	uint32_t cmd;
 
-	icmd = &cmdiocb->iocb;
 	pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
 	lp = (uint32_t *) pcmd->virt;
 
@@ -6259,7 +6232,6 @@ lpfc_els_rcv_rls(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 {
 	struct lpfc_hba *phba = vport->phba;
 	LPFC_MBOXQ_t *mbox;
-	struct lpfc_dmabuf *pcmd;
 	struct ls_rjt stat;
 
 	if ((ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) &&
@@ -6267,8 +6239,6 @@ lpfc_els_rcv_rls(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 		/* reject the unsolicited RPS request and done with it */
 		goto reject_out;
 
-	pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
-
 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_ATOMIC);
 	if (mbox) {
 		lpfc_read_lnk_stat(phba, mbox);
@@ -6482,7 +6452,6 @@ lpfc_issue_els_rrq(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 {
 	struct lpfc_hba  *phba = vport->phba;
 	struct RRQ *els_rrq;
-	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
@@ -6501,7 +6470,6 @@ lpfc_issue_els_rrq(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (!elsiocb)
 		return 1;
 
-	icmd = &elsiocb->iocb;
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
 
 	/* For RRQ request, remainder of payload is Exchange IDs */
@@ -7374,6 +7342,15 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 			 "Data: x%x x%x x%x x%x\n",
 			cmd, did, vport->port_state, vport->fc_flag,
 			vport->fc_myDID, vport->fc_prevDID);
+
+	/* reject till our FLOGI completes */
+	if ((vport->port_state < LPFC_FABRIC_CFG_LINK) &&
+		(cmd != ELS_CMD_FLOGI)) {
+		rjt_err = LSRJT_UNABLE_TPC;
+		rjt_exp = LSEXP_NOTHING_MORE;
+		goto lsrjt;
+	}
+
 	switch (cmd) {
 	case ELS_CMD_PLOGI:
 		lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL,
@@ -7411,20 +7388,6 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 				rjt_exp = LSEXP_NOTHING_MORE;
 				break;
 			}
-			/* We get here, and drop thru, if we are PT2PT with
-			 * another NPort and the other side has initiated
-			 * the PLOGI before responding to our FLOGI.
-			 */
-			if (phba->sli_rev == LPFC_SLI_REV4 &&
-			    (phba->fc_topology_changed ||
-			     vport->fc_myDID != vport->fc_prevDID)) {
-				lpfc_unregister_fcf_prep(phba);
-				spin_lock_irq(shost->host_lock);
-				vport->fc_flag &= ~FC_VFI_REGISTERED;
-				spin_unlock_irq(shost->host_lock);
-				phba->fc_topology_changed = 0;
-				lpfc_issue_reg_vfi(vport);
-			}
 		}
 
 		spin_lock_irq(shost->host_lock);
@@ -7655,6 +7618,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 		break;
 	}
 
+lsrjt:
 	/* check if need to LS_RJT received ELS cmd */
 	if (rjt_err) {
 		memset(&stat, 0, sizeof(stat));
@@ -8428,7 +8392,6 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_hba  *phba = vport->phba;
-	IOCB_t *icmd;
 	struct lpfc_iocbq *elsiocb;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
@@ -8439,7 +8402,6 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	if (!elsiocb)
 		return 1;
 
-	icmd = &elsiocb->iocb;
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
 	*((uint32_t *) (pcmd)) = ELS_CMD_LOGO;
 	pcmd += sizeof(uint32_t);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 759cbebed..bfc2442dd 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -800,7 +800,6 @@ lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove)
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_hba  *phba = vport->phba;
 	struct lpfc_nodelist *ndlp, *next_ndlp;
-	int  rc;
 
 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
 		if (!NLP_CHK_NODE_ACT(ndlp))
@@ -816,10 +815,10 @@ lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove)
 		if ((phba->sli_rev < LPFC_SLI_REV4) &&
 		    (!remove && ndlp->nlp_type & NLP_FABRIC))
 			continue;
-		rc = lpfc_disc_state_machine(vport, ndlp, NULL,
-					     remove
-					     ? NLP_EVT_DEVICE_RM
-					     : NLP_EVT_DEVICE_RECOVERY);
+		lpfc_disc_state_machine(vport, ndlp, NULL,
+					remove
+					? NLP_EVT_DEVICE_RM
+					: NLP_EVT_DEVICE_RECOVERY);
 	}
 	if (phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) {
 		if (phba->sli_rev == LPFC_SLI_REV4)
@@ -1774,7 +1773,6 @@ lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
 			     uint16_t *next_fcf_index)
 {
 	void *virt_addr;
-	dma_addr_t phys_addr;
 	struct lpfc_mbx_sge sge;
 	struct lpfc_mbx_read_fcf_tbl *read_fcf;
 	uint32_t shdr_status, shdr_add_status, if_type;
@@ -1785,7 +1783,6 @@ lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
 	 * routine only uses a single SGE.
 	 */
 	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
-	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
 	if (unlikely(!mboxq->sge_array)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
 				"2524 Failed to get the non-embedded SGE "
@@ -2977,7 +2974,8 @@ lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) pmb->context1;
 	struct lpfc_vport  *vport = pmb->vport;
-
+	struct serv_parm *sp = &vport->fc_sparam;
+	uint32_t ed_tov;
 
 	/* Check for error */
 	if (mb->mbxStatus) {
@@ -2992,6 +2990,18 @@ lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 
 	memcpy((uint8_t *) &vport->fc_sparam, (uint8_t *) mp->virt,
 	       sizeof (struct serv_parm));
+
+	ed_tov = be32_to_cpu(sp->cmn.e_d_tov);
+	if (sp->cmn.edtovResolution)	/* E_D_TOV ticks are in nanoseconds */
+		ed_tov = (ed_tov + 999999) / 1000000;
+
+	phba->fc_edtov = ed_tov;
+	phba->fc_ratov = (2 * ed_tov) / 1000;
+	if (phba->fc_ratov < FF_DEF_RATOV) {
+		/* RA_TOV should be atleast 10sec for initial flogi */
+		phba->fc_ratov = FF_DEF_RATOV;
+	}
+
 	lpfc_update_vport_wwn(vport);
 	if (vport->port_type == LPFC_PHYSICAL_PORT) {
 		memcpy(&phba->wwnn, &vport->fc_nodename, sizeof(phba->wwnn));
@@ -3032,6 +3042,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 	case LPFC_LINK_SPEED_8GHZ:
 	case LPFC_LINK_SPEED_10GHZ:
 	case LPFC_LINK_SPEED_16GHZ:
+	case LPFC_LINK_SPEED_32GHZ:
 		phba->fc_linkspeed = bf_get(lpfc_mbx_read_top_link_spd, la);
 		break;
 	default:
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 892c5257d..2cce88e96 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -33,7 +33,7 @@
 
 #define FF_DEF_EDTOV          2000	/* Default E_D_TOV (2000ms) */
 #define FF_DEF_ALTOV            15	/* Default AL_TIME (15ms) */
-#define FF_DEF_RATOV             2	/* Default RA_TOV (2s) */
+#define FF_DEF_RATOV            10	/* Default RA_TOV (10s) */
 #define FF_DEF_ARBTOV         1900	/* Default ARB_TOV (1900ms) */
 
 #define LPFC_BUF_RING0        64	/* Number of buffers to post to RING
@@ -1400,6 +1400,7 @@ struct lpfc_fdmi_reg_portattr {
 #define PCI_DEVICE_ID_LANCER_FC_VF  0xe208
 #define PCI_DEVICE_ID_LANCER_FCOE   0xe260
 #define PCI_DEVICE_ID_LANCER_FCOE_VF 0xe268
+#define PCI_DEVICE_ID_LANCER_G6_FC  0xe300
 #define PCI_DEVICE_ID_SAT_SMB       0xf011
 #define PCI_DEVICE_ID_SAT_MID       0xf015
 #define PCI_DEVICE_ID_RFLY          0xf095
@@ -2075,6 +2076,7 @@ typedef struct {
 #define LINK_SPEED_8G   0x8     /* 8 Gigabaud */
 #define LINK_SPEED_10G  0x10    /* 10 Gigabaud */
 #define LINK_SPEED_16G  0x11    /* 16 Gigabaud */
+#define LINK_SPEED_32G  0x14    /* 32 Gigabaud */
 
 } INIT_LINK_VAR;
 
@@ -2246,6 +2248,7 @@ typedef struct {
 #define LMT_8Gb       0x080
 #define LMT_10Gb      0x100
 #define LMT_16Gb      0x200
+#define LMT_32Gb      0x400
 	uint32_t rsvd2;
 	uint32_t rsvd3;
 	uint32_t max_xri;
@@ -2727,6 +2730,7 @@ struct lpfc_mbx_read_top {
 #define LPFC_LINK_SPEED_8GHZ	0x20
 #define LPFC_LINK_SPEED_10GHZ	0x40
 #define LPFC_LINK_SPEED_16GHZ	0x80
+#define LPFC_LINK_SPEED_32GHZ	0x90
 };
 
 /* Structure for MB Command CLEAR_LA (22) */
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index bffe48095..dbb8e1bbd 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -699,7 +699,9 @@ lpfc_hba_init_link_fc_topology(struct lpfc_hba *phba, uint32_t fc_topology,
 	    ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_10G) &&
 	     !(phba->lmt & LMT_10Gb)) ||
 	    ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G) &&
-	     !(phba->lmt & LMT_16Gb))) {
+	     !(phba->lmt & LMT_16Gb)) ||
+	    ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_32G) &&
+	     !(phba->lmt & LMT_32Gb))) {
 		/* Reset link speed to auto */
 		lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
 			"1302 Invalid speed for this board:%d "
@@ -2035,7 +2037,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 		&& descp && descp[0] != '\0')
 		return;
 
-	if (phba->lmt & LMT_16Gb)
+	if (phba->lmt & LMT_32Gb)
+		max_speed = 32;
+	else if (phba->lmt & LMT_16Gb)
 		max_speed = 16;
 	else if (phba->lmt & LMT_10Gb)
 		max_speed = 10;
@@ -2229,6 +2233,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 		m = (typeof(m)){"OCe15100", "PCIe",
 				"Obsolete, Unsupported FCoE"};
 		break;
+	case PCI_DEVICE_ID_LANCER_G6_FC:
+		m = (typeof(m)){"LPe32000", "PCIe", "Fibre Channel Adapter"};
+		break;
 	case PCI_DEVICE_ID_SKYHAWK:
 	case PCI_DEVICE_ID_SKYHAWK_VF:
 		oneConnect = 1;
@@ -2253,7 +2260,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 				phba->Port);
 		else if (max_speed == 0)
 			snprintf(descp, 255,
-				"Emulex %s %s %s ",
+				"Emulex %s %s %s",
 				m.name, m.bus, m.function);
 		else
 			snprintf(descp, 255,
@@ -3491,6 +3498,8 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
 				 sizeof fc_host_symbolic_name(shost));
 
 	fc_host_supported_speeds(shost) = 0;
+	if (phba->lmt & LMT_32Gb)
+		fc_host_supported_speeds(shost) |= FC_PORTSPEED_32GBIT;
 	if (phba->lmt & LMT_16Gb)
 		fc_host_supported_speeds(shost) |= FC_PORTSPEED_16GBIT;
 	if (phba->lmt & LMT_10Gb)
@@ -3854,6 +3863,9 @@ lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code,
 		case LPFC_FC_LA_SPEED_16G:
 			port_speed = 16000;
 			break;
+		case LPFC_FC_LA_SPEED_32G:
+			port_speed = 32000;
+			break;
 		default:
 			port_speed = 0;
 		}
@@ -4982,8 +4994,7 @@ lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
 	}
 
 	if (!phba->sli.ring)
-		phba->sli.ring = (struct lpfc_sli_ring *)
-			kzalloc(LPFC_SLI3_MAX_RING *
+		phba->sli.ring = kzalloc(LPFC_SLI3_MAX_RING *
 			sizeof(struct lpfc_sli_ring), GFP_KERNEL);
 	if (!phba->sli.ring)
 		return -ENOMEM;
@@ -4995,7 +5006,7 @@ lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
 
 	/* Initialize the host templates the configured values. */
 	lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-	lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+	lpfc_template_s3.sg_tablesize = phba->cfg_sg_seg_cnt;
 
 	/* There are going to be 2 reserved BDEs: 1 FCP cmnd + 1 FCP rsp */
 	if (phba->cfg_enable_bg) {
@@ -8679,7 +8690,6 @@ lpfc_sli4_set_affinity(struct lpfc_hba *phba, int vectors)
 #ifdef CONFIG_X86
 	struct cpuinfo_x86 *cpuinfo;
 #endif
-	struct cpumask *mask;
 	uint8_t chann[LPFC_FCP_IO_CHAN_MAX+1];
 
 	/* If there is no mapping, just return */
@@ -8773,11 +8783,8 @@ found:
 			first_cpu = cpu;
 
 		/* Now affinitize to the selected CPU */
-		mask = &cpup->maskbits;
-		cpumask_clear(mask);
-		cpumask_set_cpu(cpu, mask);
 		i = irq_set_affinity_hint(phba->sli4_hba.msix_entries[idx].
-					  vector, mask);
+					  vector, get_cpu_mask(cpu));
 
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 				"3330 Set Affinity: CPU %d channel %d "
@@ -10287,7 +10294,7 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 	struct lpfc_hba   *phba;
 	struct lpfc_vport *vport = NULL;
 	struct Scsi_Host  *shost = NULL;
-	int error, ret;
+	int error;
 	uint32_t cfg_mode, intr_mode;
 	int adjusted_fcp_io_channel;
 
@@ -10411,7 +10418,7 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 
 	/* check for firmware upgrade or downgrade */
 	if (phba->cfg_request_firmware_upgrade)
-		ret = lpfc_sli4_request_firmware_update(phba, INT_FW_UPGRADE);
+		lpfc_sli4_request_firmware_update(phba, INT_FW_UPGRADE);
 
 	/* Check if there are static vports to be created. */
 	lpfc_create_static_vport(phba);
@@ -11354,6 +11361,8 @@ static struct pci_device_id lpfc_id_table[] = {
 		PCI_ANY_ID, PCI_ANY_ID, },
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE_VF,
 		PCI_ANY_ID, PCI_ANY_ID, },
+	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_G6_FC,
+		PCI_ANY_ID, PCI_ANY_ID, },
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SKYHAWK,
 		PCI_ANY_ID, PCI_ANY_ID, },
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SKYHAWK_VF,
@@ -11477,6 +11486,7 @@ lpfc_exit(void)
 		free_pages((unsigned long)_dump_buf_dif, _dump_buf_dif_order);
 	}
 	kfree(lpfc_used_cpu);
+	idr_destroy(&lpfc_hba_index);
 }
 
 module_init(lpfc_init);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 4abb93a83..f87f90e9b 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -289,9 +289,7 @@ lpfc_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb,
 		   struct lpfc_dmabuf *mp)
 {
 	MAILBOX_t *mb;
-	struct lpfc_sli *psli;
 
-	psli = &phba->sli;
 	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
@@ -483,13 +481,11 @@ lpfc_init_link(struct lpfc_hba * phba,
 	       LPFC_MBOXQ_t * pmb, uint32_t topology, uint32_t linkspeed)
 {
 	lpfc_vpd_t *vpd;
-	struct lpfc_sli *psli;
 	MAILBOX_t *mb;
 
 	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
-	psli = &phba->sli;
 	switch (topology) {
 	case FLAGS_TOPOLOGY_MODE_LOOP_PT:
 		mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_LOOP;
@@ -510,6 +506,13 @@ lpfc_init_link(struct lpfc_hba * phba,
 		break;
 	}
 
+	if (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC &&
+		mb->un.varInitLnk.link_flags & FLAGS_TOPOLOGY_MODE_LOOP) {
+		/* Failover is not tried for Lancer G6 */
+		mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT;
+		phba->cfg_topology = FLAGS_TOPOLOGY_MODE_PT_PT;
+	}
+
 	/* Enable asynchronous ABTS responses from firmware */
 	mb->un.varInitLnk.link_flags |= FLAGS_IMED_ABORT;
 
@@ -543,6 +546,10 @@ lpfc_init_link(struct lpfc_hba * phba,
 			mb->un.varInitLnk.link_flags |=	FLAGS_LINK_SPEED;
 			mb->un.varInitLnk.link_speed = LINK_SPEED_16G;
 			break;
+		case LPFC_USER_LINK_SPEED_32G:
+			mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
+			mb->un.varInitLnk.link_speed = LINK_SPEED_32G;
+			break;
 		case LPFC_USER_LINK_SPEED_AUTO:
 		default:
 			mb->un.varInitLnk.link_speed = LINK_SPEED_AUTO;
@@ -585,9 +592,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi)
 {
 	struct lpfc_dmabuf *mp;
 	MAILBOX_t *mb;
-	struct lpfc_sli *psli;
 
-	psli = &phba->sli;
 	mb = &pmb->u.mb;
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
@@ -2010,7 +2015,6 @@ lpfc_sli4_mbx_read_fcf_rec(struct lpfc_hba *phba,
 			   uint16_t fcf_index)
 {
 	void *virt_addr;
-	dma_addr_t phys_addr;
 	uint8_t *bytep;
 	struct lpfc_mbx_sge sge;
 	uint32_t alloc_len, req_len;
@@ -2039,7 +2043,6 @@ lpfc_sli4_mbx_read_fcf_rec(struct lpfc_hba *phba,
 	 * routine only uses a single SGE.
 	 */
 	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
-	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
 	virt_addr = mboxq->sge_array->addr[0];
 	read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
 
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index af3b38aba..ed9a2c80c 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -820,7 +820,6 @@ lpfc_disc_illegal(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 {
 	struct lpfc_hba *phba;
 	LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg;
-	MAILBOX_t *mb;
 	uint16_t rpi;
 
 	phba = vport->phba;
@@ -828,7 +827,6 @@ lpfc_disc_illegal(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (!(phba->pport->load_flag & FC_UNLOADING) &&
 		(evt == NLP_EVT_CMPL_REG_LOGIN) &&
 		(!pmb->u.mb.mbxStatus)) {
-		mb = &pmb->u.mb;
 		rpi = pmb->u.mb.un.varWords[0];
 		lpfc_release_rpi(phba, vport, rpi);
 	}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index e5eb40d2c..4679ed444 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1293,7 +1293,6 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		uint32_t *reftag, uint16_t *apptag, uint32_t new_guard)
 {
 	struct scatterlist *sgpe; /* s/g prot entry */
-	struct scatterlist *sgde; /* s/g data entry */
 	struct lpfc_scsi_buf *lpfc_cmd = NULL;
 	struct scsi_dif_tuple *src = NULL;
 	struct lpfc_nodelist *ndlp;
@@ -1309,7 +1308,6 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		return 0;
 
 	sgpe = scsi_prot_sglist(sc);
-	sgde = scsi_sglist(sc);
 	lba = scsi_get_lba(sc);
 
 	/* First check if we need to match the LBA */
@@ -1882,7 +1880,6 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 #endif
 	uint32_t checking = 1;
 	uint32_t reftag;
-	unsigned blksize;
 	uint8_t txop, rxop;
 
 	status  = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
@@ -1890,7 +1887,6 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		goto out;
 
 	/* extract some info from the scsi command for pde*/
-	blksize = lpfc_cmd_blksize(sc);
 	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
@@ -2263,7 +2259,6 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	dma_addr_t physaddr;
 	int i = 0, num_sge = 0, status;
 	uint32_t reftag;
-	unsigned blksize;
 	uint8_t txop, rxop;
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	uint32_t rc;
@@ -2277,7 +2272,6 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		goto out;
 
 	/* extract some info from the scsi command for pde*/
-	blksize = lpfc_cmd_blksize(sc);
 	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
@@ -2881,7 +2875,7 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 	struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
 	struct scsi_dif_tuple *src = NULL;
 	uint8_t *data_src = NULL;
-	uint16_t guard_tag, guard_type;
+	uint16_t guard_tag;
 	uint16_t start_app_tag, app_tag;
 	uint32_t start_ref_tag, ref_tag;
 	int prot, protsegcnt;
@@ -2922,7 +2916,6 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 		data_len = sgde->length;
 		if ((data_len & (blksize - 1)) == 0)
 			chk_guard = 1;
-		guard_type = scsi_host_get_guard(cmd->device->host);
 
 		src = (struct scsi_dif_tuple *)sg_virt(sgpe);
 		start_ref_tag = (uint32_t)scsi_get_lba(cmd); /* Truncate LBA */
@@ -3908,12 +3901,10 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 	struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
 	struct lpfc_nodelist *pnode = rdata->pnode;
 	struct scsi_cmnd *cmd;
-	int result;
 	int depth;
 	unsigned long flags;
 	struct lpfc_fast_path_event *fast_path_evt;
 	struct Scsi_Host *shost;
-	uint32_t queue_depth, scsi_id;
 	uint32_t logit = LOG_FCP;
 
 	/* Sanity check on return of outstanding command */
@@ -4095,7 +4086,6 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 	}
 
 	lpfc_update_stats(phba, lpfc_cmd);
-	result = cmd->result;
 	if (vport->cfg_max_scsicmpl_time &&
 	   time_after(jiffies, lpfc_cmd->start_time +
 		msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) {
@@ -4132,8 +4122,6 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 	lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
 
 	/* The sdev is not guaranteed to be valid post scsi_done upcall. */
-	queue_depth = cmd->device->queue_depth;
-	scsi_id = cmd->device->id;
 	cmd->scsi_done(cmd);
 
 	if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
@@ -5926,7 +5914,6 @@ struct scsi_host_template lpfc_template_s3 = {
 	.max_sectors		= 0xFFFF,
 	.vendor_id		= LPFC_NL_VENDOR_ID,
 	.change_queue_depth	= scsi_change_queue_depth,
-	.use_blk_tags		= 1,
 	.track_queue_depth	= 1,
 };
 
@@ -5952,7 +5939,6 @@ struct scsi_host_template lpfc_template = {
 	.max_sectors		= 0xFFFF,
 	.vendor_id		= LPFC_NL_VENDOR_ID,
 	.change_queue_depth	= scsi_change_queue_depth,
-	.use_blk_tags		= 1,
 	.track_queue_depth	= 1,
 };
 
@@ -5976,6 +5962,5 @@ struct scsi_host_template lpfc_vport_template = {
 	.shost_attrs		= lpfc_vport_attrs,
 	.max_sectors		= 0xFFFF,
 	.change_queue_depth	= scsi_change_queue_depth,
-	.use_blk_tags		= 1,
 	.track_queue_depth	= 1,
 };
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 4feb9312a..f9585cdd8 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -6696,7 +6696,7 @@ lpfc_mbox_timeout(unsigned long ptr)
  * This function checks if any mailbox completions are present on the mailbox
  * completion queue.
  **/
-bool
+static bool
 lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba)
 {
 
@@ -12491,12 +12491,10 @@ lpfc_sli4_fof_intr_handler(int irq, void *dev_id)
 	struct lpfc_eqe *eqe;
 	unsigned long iflag;
 	int ecount = 0;
-	uint32_t eqidx;
 
 	/* Get the driver's phba structure from the dev_id */
 	fcp_eq_hdl = (struct lpfc_fcp_eq_hdl *)dev_id;
 	phba = fcp_eq_hdl->phba;
-	eqidx = fcp_eq_hdl->idx;
 
 	if (unlikely(!phba))
 		return IRQ_NONE;
@@ -12831,12 +12829,8 @@ out_fail:
 static void __iomem *
 lpfc_dual_chute_pci_bar_map(struct lpfc_hba *phba, uint16_t pci_barset)
 {
-	struct pci_dev *pdev;
-
 	if (!phba->pcidev)
 		return NULL;
-	else
-		pdev = phba->pcidev;
 
 	switch (pci_barset) {
 	case WQ_PCI_BAR_0_AND_1:
@@ -15920,7 +15914,6 @@ lpfc_sli4_add_fcf_record(struct lpfc_hba *phba, struct fcf_record *fcf_record)
 	LPFC_MBOXQ_t *mboxq;
 	uint8_t *bytep;
 	void *virt_addr;
-	dma_addr_t phys_addr;
 	struct lpfc_mbx_sge sge;
 	uint32_t alloc_len, req_len;
 	uint32_t fcfindex;
@@ -15953,7 +15946,6 @@ lpfc_sli4_add_fcf_record(struct lpfc_hba *phba, struct fcf_record *fcf_record)
 	 * routine only uses a single SGE.
 	 */
 	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
-	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
 	virt_addr = mboxq->sge_array->addr[0];
 	/*
 	 * Configure the FCF record for FCFI 0.  This is the driver's
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index d1a5b057c..1e916e16c 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -454,7 +454,6 @@ struct lpfc_vector_map_info {
 	uint16_t	core_id;
 	uint16_t	irq;
 	uint16_t	channel_id;
-	struct cpumask	maskbits;
 };
 #define LPFC_VECTOR_MAP_EMPTY	0xffff
 
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 6258d3d77..ea53aa664 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "10.7.0.0."
+#define LPFC_DRIVER_VERSION "11.0.0.0."
 #define LPFC_DRIVER_NAME		"lpfc"
 
 /* Used for SLI 2/3 */
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 20c375419..c0f7c8ce5 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -35,8 +35,8 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION				"06.807.10.00-rc1"
-#define MEGASAS_RELDATE				"March 6, 2015"
+#define MEGASAS_VERSION				"06.808.16.00-rc1"
+#define MEGASAS_RELDATE				"Oct. 8, 2015"
 
 /*
  * Device IDs
@@ -52,6 +52,10 @@
 #define PCI_DEVICE_ID_LSI_PLASMA		0x002f
 #define PCI_DEVICE_ID_LSI_INVADER		0x005d
 #define PCI_DEVICE_ID_LSI_FURY			0x005f
+#define PCI_DEVICE_ID_LSI_INTRUDER		0x00ce
+#define PCI_DEVICE_ID_LSI_INTRUDER_24		0x00cf
+#define PCI_DEVICE_ID_LSI_CUTLASS_52		0x0052
+#define PCI_DEVICE_ID_LSI_CUTLASS_53		0x0053
 
 /*
  * Intel HBA SSDIDs
@@ -62,6 +66,14 @@
 #define MEGARAID_INTEL_RS3MC044_SSDID		0x9381
 #define MEGARAID_INTEL_RS3WC080_SSDID		0x9341
 #define MEGARAID_INTEL_RS3WC040_SSDID		0x9343
+#define MEGARAID_INTEL_RMS3BC160_SSDID		0x352B
+
+/*
+ * Intruder HBA SSDIDs
+ */
+#define MEGARAID_INTRUDER_SSDID1		0x9371
+#define MEGARAID_INTRUDER_SSDID2		0x9390
+#define MEGARAID_INTRUDER_SSDID3		0x9370
 
 /*
  * Intel HBA branding
@@ -78,6 +90,8 @@
 	"Intel(R) RAID Controller RS3WC080"
 #define MEGARAID_INTEL_RS3WC040_BRANDING	\
 	"Intel(R) RAID Controller RS3WC040"
+#define MEGARAID_INTEL_RMS3BC160_BRANDING	\
+	"Intel(R) Integrated RAID Module RMS3BC160"
 
 /*
  * =====================================
@@ -273,6 +287,16 @@ enum MFI_STAT {
 	MFI_STAT_INVALID_STATUS = 0xFF
 };
 
+enum mfi_evt_class {
+	MFI_EVT_CLASS_DEBUG =		-2,
+	MFI_EVT_CLASS_PROGRESS =	-1,
+	MFI_EVT_CLASS_INFO =		0,
+	MFI_EVT_CLASS_WARNING =		1,
+	MFI_EVT_CLASS_CRITICAL =	2,
+	MFI_EVT_CLASS_FATAL =		3,
+	MFI_EVT_CLASS_DEAD =		4
+};
+
 /*
  * Crash dump related defines
  */
@@ -364,6 +388,8 @@ enum MR_EVT_ARGS {
 	MR_EVT_ARGS_GENERIC,
 };
 
+
+#define SGE_BUFFER_SIZE	4096
 /*
  * define constants for device list query options
  */
@@ -394,6 +420,7 @@ enum MR_LD_QUERY_TYPE {
 #define MR_EVT_FOREIGN_CFG_IMPORTED                     0x00db
 #define MR_EVT_LD_OFFLINE                               0x00fc
 #define MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED             0x0152
+#define MR_EVT_CTRL_PROP_CHANGED			0x012f
 
 enum MR_PD_STATE {
 	MR_PD_STATE_UNCONFIGURED_GOOD   = 0x00,
@@ -973,7 +1000,12 @@ struct megasas_ctrl_info {
 
 	struct {
 #if defined(__BIG_ENDIAN_BITFIELD)
-		u32     reserved:12;
+		u32     reserved:7;
+		u32     useSeqNumJbodFP:1;
+		u32     supportExtendedSSCSize:1;
+		u32     supportDiskCacheSettingForSysPDs:1;
+		u32     supportCPLDUpdate:1;
+		u32     supportTTYLogCompression:1;
 		u32     discardCacheDuringLDDelete:1;
 		u32     supportSecurityonJBOD:1;
 		u32     supportCacheBypassModes:1;
@@ -1013,7 +1045,12 @@ struct megasas_ctrl_info {
 		u32     supportCacheBypassModes:1;
 		u32     supportSecurityonJBOD:1;
 		u32     discardCacheDuringLDDelete:1;
-		u32     reserved:12;
+		u32     supportTTYLogCompression:1;
+		u32     supportCPLDUpdate:1;
+		u32     supportDiskCacheSettingForSysPDs:1;
+		u32     supportExtendedSSCSize:1;
+		u32     useSeqNumJbodFP:1;
+		u32     reserved:7;
 #endif
 	} adapterOperations3;
 
@@ -1229,7 +1266,9 @@ union megasas_sgl_frame {
 typedef union _MFI_CAPABILITIES {
 	struct {
 #if   defined(__BIG_ENDIAN_BITFIELD)
-		u32     reserved:25;
+		u32     reserved:23;
+		u32     support_ext_io_size:1;
+		u32	support_ext_queue_depth:1;
 		u32     security_protocol_cmds_fw:1;
 		u32     support_core_affinity:1;
 		u32     support_ndrive_r1_lb:1;
@@ -1245,7 +1284,9 @@ typedef union _MFI_CAPABILITIES {
 		u32     support_ndrive_r1_lb:1;
 		u32     support_core_affinity:1;
 		u32     security_protocol_cmds_fw:1;
-		u32     reserved:25;
+		u32	support_ext_queue_depth:1;
+		u32     support_ext_io_size:1;
+		u32     reserved:23;
 #endif
 	} mfi_capabilities;
 	__le32		reg;
@@ -1690,6 +1731,7 @@ struct megasas_instance {
 	u32 crash_dump_drv_support;
 	u32 crash_dump_app_support;
 	u32 secure_jbod_support;
+	bool use_seqnum_jbod_fp;   /* Added for PD sequence */
 	spinlock_t crashdump_lock;
 
 	struct megasas_register_set __iomem *reg_set;
@@ -1748,6 +1790,7 @@ struct megasas_instance {
 	u8 UnevenSpanSupport;
 
 	u8 supportmax256vd;
+	u8 allow_fw_scan;
 	u16 fw_supported_vd_count;
 	u16 fw_supported_pd_count;
 
@@ -1769,7 +1812,9 @@ struct megasas_instance {
 	struct msix_entry msixentry[MEGASAS_MAX_MSIX_QUEUES];
 	struct megasas_irq_context irq_context[MEGASAS_MAX_MSIX_QUEUES];
 	u64 map_id;
+	u64 pd_seq_map_id;
 	struct megasas_cmd *map_update_cmd;
+	struct megasas_cmd *jbod_seq_cmd;
 	unsigned long bar;
 	long reset_flags;
 	struct mutex reset_mutex;
@@ -1780,6 +1825,7 @@ struct megasas_instance {
 	char mpio;
 	u16 throttlequeuedepth;
 	u8 mask_interrupts;
+	u16 max_chain_frame_sz;
 	u8 is_imr;
 	bool dev_handle;
 };
@@ -1985,6 +2031,9 @@ __le16 get_updated_dev_handle(struct megasas_instance *instance,
 void mr_update_load_balance_params(struct MR_DRV_RAID_MAP_ALL *map,
 	struct LD_LOAD_BALANCE_INFO *lbInfo);
 int megasas_get_ctrl_info(struct megasas_instance *instance);
+/* PD sequence */
+int
+megasas_sync_pd_seq_num(struct megasas_instance *instance, bool pend);
 int megasas_set_crash_dump_params(struct megasas_instance *instance,
 	u8 crash_buf_state);
 void megasas_free_host_crash_buffer(struct megasas_instance *instance);
@@ -2000,5 +2049,6 @@ void __megasas_return_cmd(struct megasas_instance *instance,
 void megasas_return_mfi_mpt_pthr(struct megasas_instance *instance,
 	struct megasas_cmd *cmd_mfi, struct megasas_cmd_fusion *cmd_fusion);
 int megasas_cmd_type(struct scsi_cmnd *cmd);
+void megasas_setup_jbod_map(struct megasas_instance *instance);
 
 #endif				/*LSI_MEGARAID_SAS_H */
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index eaa81e552..97a1c1c33 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -135,6 +135,12 @@ static struct pci_device_id megasas_pci_table[] = {
 	/* Invader */
 	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FURY)},
 	/* Fury */
+	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_INTRUDER)},
+	/* Intruder */
+	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_INTRUDER_24)},
+	/* Intruder 24 port*/
+	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CUTLASS_52)},
+	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CUTLASS_53)},
 	{}
 };
 
@@ -260,6 +266,66 @@ megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
 
 }
 
+static const char *
+format_timestamp(uint32_t timestamp)
+{
+	static char buffer[32];
+
+	if ((timestamp & 0xff000000) == 0xff000000)
+		snprintf(buffer, sizeof(buffer), "boot + %us", timestamp &
+		0x00ffffff);
+	else
+		snprintf(buffer, sizeof(buffer), "%us", timestamp);
+	return buffer;
+}
+
+static const char *
+format_class(int8_t class)
+{
+	static char buffer[6];
+
+	switch (class) {
+	case MFI_EVT_CLASS_DEBUG:
+		return "debug";
+	case MFI_EVT_CLASS_PROGRESS:
+		return "progress";
+	case MFI_EVT_CLASS_INFO:
+		return "info";
+	case MFI_EVT_CLASS_WARNING:
+		return "WARN";
+	case MFI_EVT_CLASS_CRITICAL:
+		return "CRIT";
+	case MFI_EVT_CLASS_FATAL:
+		return "FATAL";
+	case MFI_EVT_CLASS_DEAD:
+		return "DEAD";
+	default:
+		snprintf(buffer, sizeof(buffer), "%d", class);
+		return buffer;
+	}
+}
+
+/**
+  * megasas_decode_evt: Decode FW AEN event and print critical event
+  * for information.
+  * @instance:			Adapter soft state
+  */
+static void
+megasas_decode_evt(struct megasas_instance *instance)
+{
+	struct megasas_evt_detail *evt_detail = instance->evt_detail;
+	union megasas_evt_class_locale class_locale;
+	class_locale.word = le32_to_cpu(evt_detail->cl.word);
+
+	if (class_locale.members.class >= MFI_EVT_CLASS_CRITICAL)
+		dev_info(&instance->pdev->dev, "%d (%s/0x%04x/%s) - %s\n",
+			le32_to_cpu(evt_detail->seq_num),
+			format_timestamp(le32_to_cpu(evt_detail->time_stamp)),
+			(class_locale.members.locale),
+			format_class(class_locale.members.class),
+			evt_detail->description);
+}
+
 /**
 *	The following functions are defined for xscale
 *	(deviceid : 1064R, PERC5) controllers
@@ -1659,8 +1725,56 @@ static struct megasas_instance *megasas_lookup_instance(u16 host_no)
 	return NULL;
 }
 
+/*
+* megasas_set_dma_alignment - Set DMA alignment for PI enabled VD
+*
+* @sdev: OS provided scsi device
+*
+* Returns void
+*/
+static void megasas_set_dma_alignment(struct scsi_device *sdev)
+{
+	u32 device_id, ld;
+	struct megasas_instance *instance;
+	struct fusion_context *fusion;
+	struct MR_LD_RAID *raid;
+	struct MR_DRV_RAID_MAP_ALL *local_map_ptr;
+
+	instance = megasas_lookup_instance(sdev->host->host_no);
+	fusion = instance->ctrl_context;
+
+	if (!fusion)
+		return;
+
+	if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS) {
+		device_id = ((sdev->channel % 2) * MEGASAS_MAX_DEV_PER_CHANNEL)
+					+ sdev->id;
+		local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)];
+		ld = MR_TargetIdToLdGet(device_id, local_map_ptr);
+		raid = MR_LdRaidGet(ld, local_map_ptr);
+
+		if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER)
+			blk_queue_update_dma_alignment(sdev->request_queue, 0x7);
+	}
+}
+
 static int megasas_slave_configure(struct scsi_device *sdev)
 {
+	u16 pd_index = 0;
+	struct megasas_instance *instance;
+
+	instance = megasas_lookup_instance(sdev->host->host_no);
+	if (instance->allow_fw_scan) {
+		if (sdev->channel < MEGASAS_MAX_PD_CHANNELS &&
+			sdev->type == TYPE_DISK) {
+			pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
+				sdev->id;
+			if (instance->pd_list[pd_index].driveState !=
+				MR_PD_STATE_SYSTEM)
+				return -ENXIO;
+		}
+	}
+	megasas_set_dma_alignment(sdev);
 	/*
 	 * The RAID firmware may require extended timeouts.
 	 */
@@ -1683,8 +1797,8 @@ static int megasas_slave_alloc(struct scsi_device *sdev)
 		pd_index =
 			(sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
 			sdev->id;
-		if (instance->pd_list[pd_index].driveState ==
-					MR_PD_STATE_SYSTEM) {
+		if ((instance->allow_fw_scan || instance->pd_list[pd_index].driveState ==
+			MR_PD_STATE_SYSTEM)) {
 			return 0;
 		}
 		return -ENXIO;
@@ -1736,10 +1850,7 @@ void megaraid_sas_kill_hba(struct megasas_instance *instance)
 	msleep(1000);
 	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
 		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+		(instance->ctrl_context)) {
 		writel(MFI_STOP_ADP, &instance->reg_set->doorbell);
 		/* Flush */
 		readl(&instance->reg_set->doorbell);
@@ -2506,10 +2617,7 @@ static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
 	/*
 	 * First wait for all commands to complete
 	 */
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
+	if (instance->ctrl_context)
 		ret = megasas_reset_fusion(scmd->device->host, 1);
 	else
 		ret = megasas_generic_reset(scmd);
@@ -2837,7 +2945,7 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
 	struct megasas_header *hdr = &cmd->frame->hdr;
 	unsigned long flags;
 	struct fusion_context *fusion = instance->ctrl_context;
-	u32 opcode;
+	u32 opcode, status;
 
 	/* flag for the retry reset */
 	cmd->retry_for_fw_reset = 0;
@@ -2945,6 +3053,7 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
 			&& (cmd->frame->dcmd.mbox.b[1] == 1)) {
 			fusion->fast_path_io = 0;
 			spin_lock_irqsave(instance->host->host_lock, flags);
+			instance->map_update_cmd = NULL;
 			if (cmd->frame->hdr.cmd_status != 0) {
 				if (cmd->frame->hdr.cmd_status !=
 				    MFI_STAT_NOT_FOUND)
@@ -2982,6 +3091,27 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
 			spin_unlock_irqrestore(&poll_aen_lock, flags);
 		}
 
+		/* FW has an updated PD sequence */
+		if ((opcode == MR_DCMD_SYSTEM_PD_MAP_GET_INFO) &&
+			(cmd->frame->dcmd.mbox.b[0] == 1)) {
+
+			spin_lock_irqsave(instance->host->host_lock, flags);
+			status = cmd->frame->hdr.cmd_status;
+			instance->jbod_seq_cmd = NULL;
+			megasas_return_cmd(instance, cmd);
+
+			if (status == MFI_STAT_OK) {
+				instance->pd_seq_map_id++;
+				/* Re-register a pd sync seq num cmd */
+				if (megasas_sync_pd_seq_num(instance, true))
+					instance->use_seqnum_jbod_fp = false;
+			} else
+				instance->use_seqnum_jbod_fp = false;
+
+			spin_unlock_irqrestore(instance->host->host_lock, flags);
+			break;
+		}
+
 		/*
 		 * See if got an event notification
 		 */
@@ -3348,22 +3478,14 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
 				PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
 				(instance->pdev->device ==
 				 PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
-				(instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_FUSION) ||
-				(instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_PLASMA) ||
-				(instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_INVADER) ||
-				(instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_FURY)) {
+				(instance->ctrl_context))
 				writel(
 				  MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
 				  &instance->reg_set->doorbell);
-			} else {
+			else
 				writel(
 				    MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
 					&instance->reg_set->inbound_doorbell);
-			}
 
 			max_wait = MEGASAS_RESET_WAIT_TIME;
 			cur_state = MFI_STATE_WAIT_HANDSHAKE;
@@ -3374,17 +3496,10 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
 			     PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
 				(instance->pdev->device ==
 				 PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
-			    (instance->pdev->device ==
-			     PCI_DEVICE_ID_LSI_FUSION) ||
-			    (instance->pdev->device ==
-			     PCI_DEVICE_ID_LSI_PLASMA) ||
-			    (instance->pdev->device ==
-			     PCI_DEVICE_ID_LSI_INVADER) ||
-			    (instance->pdev->device ==
-			     PCI_DEVICE_ID_LSI_FURY)) {
+				(instance->ctrl_context))
 				writel(MFI_INIT_HOTPLUG,
 				       &instance->reg_set->doorbell);
-			} else
+			else
 				writel(MFI_INIT_HOTPLUG,
 					&instance->reg_set->inbound_doorbell);
 
@@ -3401,24 +3516,11 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
 				PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
 				(instance->pdev->device ==
 				PCI_DEVICE_ID_LSI_SAS0071SKINNY)  ||
-				(instance->pdev->device
-					== PCI_DEVICE_ID_LSI_FUSION) ||
-				(instance->pdev->device
-					== PCI_DEVICE_ID_LSI_PLASMA) ||
-				(instance->pdev->device
-					== PCI_DEVICE_ID_LSI_INVADER) ||
-				(instance->pdev->device
-					== PCI_DEVICE_ID_LSI_FURY)) {
+				(instance->ctrl_context)) {
 				writel(MFI_RESET_FLAGS,
 					&instance->reg_set->doorbell);
-				if ((instance->pdev->device ==
-					PCI_DEVICE_ID_LSI_FUSION) ||
-					(instance->pdev->device ==
-					PCI_DEVICE_ID_LSI_PLASMA) ||
-					(instance->pdev->device ==
-					PCI_DEVICE_ID_LSI_INVADER) ||
-					(instance->pdev->device ==
-					PCI_DEVICE_ID_LSI_FURY)) {
+
+				if (instance->ctrl_context) {
 					for (i = 0; i < (10 * 1000); i += 20) {
 						if (readl(
 							    &instance->
@@ -3639,11 +3741,7 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
 		memset(cmd->frame, 0, total_sz);
 		cmd->frame->io.context = cpu_to_le32(cmd->index);
 		cmd->frame->io.pad_0 = 0;
-		if ((instance->pdev->device != PCI_DEVICE_ID_LSI_FUSION) &&
-		    (instance->pdev->device != PCI_DEVICE_ID_LSI_PLASMA) &&
-		    (instance->pdev->device != PCI_DEVICE_ID_LSI_INVADER) &&
-			(instance->pdev->device != PCI_DEVICE_ID_LSI_FURY) &&
-		    (reset_devices))
+		if (!instance->ctrl_context && reset_devices)
 			cmd->frame->hdr.cmd = MFI_CMD_INVALID;
 	}
 
@@ -4136,11 +4234,21 @@ megasas_get_ctrl_info(struct megasas_instance *instance)
 		le32_to_cpus((u32 *)&ctrl_info->adapterOperations2);
 		le32_to_cpus((u32 *)&ctrl_info->adapterOperations3);
 		megasas_update_ext_vd_details(instance);
+		instance->use_seqnum_jbod_fp =
+			ctrl_info->adapterOperations3.useSeqNumJbodFP;
 		instance->is_imr = (ctrl_info->memory_size ? 0 : 1);
 		dev_info(&instance->pdev->dev,
 				"controller type\t: %s(%dMB)\n",
 				instance->is_imr ? "iMR" : "MR",
 				le16_to_cpu(ctrl_info->memory_size));
+		instance->disableOnlineCtrlReset =
+			ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
+		dev_info(&instance->pdev->dev, "Online Controller Reset(OCR)\t: %s\n",
+			instance->disableOnlineCtrlReset ? "Disabled" : "Enabled");
+		instance->secure_jbod_support =
+			ctrl_info->adapterOperations3.supportSecurityonJBOD;
+		dev_info(&instance->pdev->dev, "Secure JBOD support\t: %s\n",
+			instance->secure_jbod_support ? "Yes" : "No");
 	}
 
 	pci_free_consistent(instance->pdev, sizeof(struct megasas_ctrl_info),
@@ -4481,6 +4589,62 @@ megasas_destroy_irqs(struct megasas_instance *instance) {
 }
 
 /**
+ * megasas_setup_jbod_map -	setup jbod map for FP seq_number.
+ * @instance:				Adapter soft state
+ * @is_probe:				Driver probe check
+ *
+ * Return 0 on success.
+ */
+void
+megasas_setup_jbod_map(struct megasas_instance *instance)
+{
+	int i;
+	struct fusion_context *fusion = instance->ctrl_context;
+	u32 pd_seq_map_sz;
+
+	pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
+		(sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1));
+
+	if (reset_devices || !fusion ||
+		!instance->ctrl_info->adapterOperations3.useSeqNumJbodFP) {
+		dev_info(&instance->pdev->dev,
+			"Jbod map is not supported %s %d\n",
+			__func__, __LINE__);
+		instance->use_seqnum_jbod_fp = false;
+		return;
+	}
+
+	if (fusion->pd_seq_sync[0])
+		goto skip_alloc;
+
+	for (i = 0; i < JBOD_MAPS_COUNT; i++) {
+		fusion->pd_seq_sync[i] = dma_alloc_coherent
+			(&instance->pdev->dev, pd_seq_map_sz,
+			&fusion->pd_seq_phys[i], GFP_KERNEL);
+		if (!fusion->pd_seq_sync[i]) {
+			dev_err(&instance->pdev->dev,
+				"Failed to allocate memory from %s %d\n",
+				__func__, __LINE__);
+			if (i == 1) {
+				dma_free_coherent(&instance->pdev->dev,
+					pd_seq_map_sz, fusion->pd_seq_sync[0],
+					fusion->pd_seq_phys[0]);
+				fusion->pd_seq_sync[0] = NULL;
+			}
+			instance->use_seqnum_jbod_fp = false;
+			return;
+		}
+	}
+
+skip_alloc:
+	if (!megasas_sync_pd_seq_num(instance, false) &&
+		!megasas_sync_pd_seq_num(instance, true))
+		instance->use_seqnum_jbod_fp = true;
+	else
+		instance->use_seqnum_jbod_fp = false;
+}
+
+/**
  * megasas_init_fw -	Initializes the FW
  * @instance:		Adapter soft state
  *
@@ -4498,6 +4662,9 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	unsigned long bar_list;
 	int i, loop, fw_msix_count = 0;
 	struct IOV_111 *iovPtr;
+	struct fusion_context *fusion;
+
+	fusion = instance->ctrl_context;
 
 	/* Find first memory bar */
 	bar_list = pci_select_bars(instance->pdev, IORESOURCE_MEM);
@@ -4523,6 +4690,10 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	case PCI_DEVICE_ID_LSI_PLASMA:
 	case PCI_DEVICE_ID_LSI_INVADER:
 	case PCI_DEVICE_ID_LSI_FURY:
+	case PCI_DEVICE_ID_LSI_INTRUDER:
+	case PCI_DEVICE_ID_LSI_INTRUDER_24:
+	case PCI_DEVICE_ID_LSI_CUTLASS_52:
+	case PCI_DEVICE_ID_LSI_CUTLASS_53:
 		instance->instancet = &megasas_instance_template_fusion;
 		break;
 	case PCI_DEVICE_ID_LSI_SAS1078R:
@@ -4541,6 +4712,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	case PCI_DEVICE_ID_DELL_PERC5:
 	default:
 		instance->instancet = &megasas_instance_template_xscale;
+		instance->allow_fw_scan = 1;
 		break;
 	}
 
@@ -4575,37 +4747,32 @@ static int megasas_init_fw(struct megasas_instance *instance)
 		scratch_pad_2 = readl
 			(&instance->reg_set->outbound_scratch_pad_2);
 		/* Check max MSI-X vectors */
-		if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
-		    (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA)) {
-			instance->msix_vectors = (scratch_pad_2
-				& MR_MAX_REPLY_QUEUES_OFFSET) + 1;
-			fw_msix_count = instance->msix_vectors;
-			if (msix_vectors)
-				instance->msix_vectors =
-					min(msix_vectors,
-					    instance->msix_vectors);
-		} else if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER)
-			|| (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
-			/* Invader/Fury supports more than 8 MSI-X */
-			instance->msix_vectors = ((scratch_pad_2
-				& MR_MAX_REPLY_QUEUES_EXT_OFFSET)
-				>> MR_MAX_REPLY_QUEUES_EXT_OFFSET_SHIFT) + 1;
-			fw_msix_count = instance->msix_vectors;
-			/* Save 1-15 reply post index address to local memory
-			 * Index 0 is already saved from reg offset
-			 * MPI2_REPLY_POST_HOST_INDEX_OFFSET
-			 */
-			for (loop = 1; loop < MR_MAX_MSIX_REG_ARRAY; loop++) {
-				instance->reply_post_host_index_addr[loop] =
-					(u32 __iomem *)
-					((u8 __iomem *)instance->reg_set +
-					MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET
-					+ (loop * 0x10));
+		if (fusion) {
+			if (fusion->adapter_type == THUNDERBOLT_SERIES) { /* Thunderbolt Series*/
+				instance->msix_vectors = (scratch_pad_2
+					& MR_MAX_REPLY_QUEUES_OFFSET) + 1;
+				fw_msix_count = instance->msix_vectors;
+			} else { /* Invader series supports more than 8 MSI-x vectors*/
+				instance->msix_vectors = ((scratch_pad_2
+					& MR_MAX_REPLY_QUEUES_EXT_OFFSET)
+					>> MR_MAX_REPLY_QUEUES_EXT_OFFSET_SHIFT) + 1;
+				fw_msix_count = instance->msix_vectors;
+				/* Save 1-15 reply post index address to local memory
+				 * Index 0 is already saved from reg offset
+				 * MPI2_REPLY_POST_HOST_INDEX_OFFSET
+				 */
+				for (loop = 1; loop < MR_MAX_MSIX_REG_ARRAY; loop++) {
+					instance->reply_post_host_index_addr[loop] =
+						(u32 __iomem *)
+						((u8 __iomem *)instance->reg_set +
+						MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET
+						+ (loop * 0x10));
+				}
 			}
 			if (msix_vectors)
 				instance->msix_vectors = min(msix_vectors,
 					instance->msix_vectors);
-		} else
+		} else /* MFI adapters */
 			instance->msix_vectors = 1;
 		/* Don't bother allocating more MSI-X vectors than cpus */
 		instance->msix_vectors = min(instance->msix_vectors,
@@ -4626,6 +4793,9 @@ static int megasas_init_fw(struct megasas_instance *instance)
 		"current msix/online cpus\t: (%d/%d)\n",
 		instance->msix_vectors, (unsigned int)num_online_cpus());
 
+	tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
+		(unsigned long)instance);
+
 	if (instance->msix_vectors ?
 		megasas_setup_irqs_msix(instance, 1) :
 		megasas_setup_irqs_ioapic(instance))
@@ -4646,13 +4816,13 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	if (instance->instancet->init_adapter(instance))
 		goto fail_init_adapter;
 
-	tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
-		(unsigned long)instance);
 
 	instance->instancet->enable_intr(instance);
 
 	dev_err(&instance->pdev->dev, "INIT adapter done\n");
 
+	megasas_setup_jbod_map(instance);
+
 	/** for passthrough
 	 * the following function will get the PD LIST.
 	 */
@@ -4686,8 +4856,6 @@ static int megasas_init_fw(struct megasas_instance *instance)
 
 	tmp_sectors = min_t(u32, max_sectors_1, max_sectors_2);
 
-	instance->disableOnlineCtrlReset =
-	ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
 	instance->mpio = ctrl_info->adapterOperations2.mpio;
 	instance->UnevenSpanSupport =
 		ctrl_info->adapterOperations2.supportUnevenSpans;
@@ -4700,18 +4868,22 @@ static int megasas_init_fw(struct megasas_instance *instance)
 
 	}
 	if (ctrl_info->host_interface.SRIOV) {
-		if (!ctrl_info->adapterOperations2.activePassive)
-			instance->PlasmaFW111 = 1;
-
-		if (!instance->PlasmaFW111)
-			instance->requestorId =
-				ctrl_info->iov.requestorId;
-		else {
-			iovPtr = (struct IOV_111 *)((unsigned char *)ctrl_info + IOV_111_OFFSET);
-			instance->requestorId = iovPtr->requestorId;
+		instance->requestorId = ctrl_info->iov.requestorId;
+		if (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) {
+			if (!ctrl_info->adapterOperations2.activePassive)
+			    instance->PlasmaFW111 = 1;
+
+			dev_info(&instance->pdev->dev, "SR-IOV: firmware type: %s\n",
+			    instance->PlasmaFW111 ? "1.11" : "new");
+
+			if (instance->PlasmaFW111) {
+			    iovPtr = (struct IOV_111 *)
+				((unsigned char *)ctrl_info + IOV_111_OFFSET);
+			    instance->requestorId = iovPtr->requestorId;
+			}
 		}
-		dev_warn(&instance->pdev->dev, "I am VF "
-		       "requestorId %d\n", instance->requestorId);
+		dev_info(&instance->pdev->dev, "SRIOV: VF requestorId %d\n",
+			instance->requestorId);
 	}
 
 	instance->crash_dump_fw_support =
@@ -4732,8 +4904,6 @@ static int megasas_init_fw(struct megasas_instance *instance)
 		instance->crash_dump_buf = NULL;
 	}
 
-	instance->secure_jbod_support =
-		ctrl_info->adapterOperations3.supportSecurityonJBOD;
 
 	dev_info(&instance->pdev->dev,
 		"pci id\t\t: (0x%04x)/(0x%04x)/(0x%04x)/(0x%04x)\n",
@@ -4743,16 +4913,14 @@ static int megasas_init_fw(struct megasas_instance *instance)
 		le16_to_cpu(ctrl_info->pci.sub_device_id));
 	dev_info(&instance->pdev->dev, "unevenspan support	: %s\n",
 		instance->UnevenSpanSupport ? "yes" : "no");
-	dev_info(&instance->pdev->dev, "disable ocr		: %s\n",
-		instance->disableOnlineCtrlReset ? "yes" : "no");
 	dev_info(&instance->pdev->dev, "firmware crash dump	: %s\n",
 		instance->crash_dump_drv_support ? "yes" : "no");
-	dev_info(&instance->pdev->dev, "secure jbod		: %s\n",
-		instance->secure_jbod_support ? "yes" : "no");
+	dev_info(&instance->pdev->dev, "jbod sync map		: %s\n",
+		instance->use_seqnum_jbod_fp ? "yes" : "no");
 
 
 	instance->max_sectors_per_req = instance->max_num_sge *
-						PAGE_SIZE / 512;
+						SGE_BUFFER_SIZE / 512;
 	if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors))
 		instance->max_sectors_per_req = tmp_sectors;
 
@@ -5049,7 +5217,6 @@ static int megasas_start_aen(struct megasas_instance *instance)
 static int megasas_io_attach(struct megasas_instance *instance)
 {
 	struct Scsi_Host *host = instance->host;
-	u32 error;
 
 	/*
 	 * Export parameters required by SCSI mid-layer
@@ -5092,20 +5259,10 @@ static int megasas_io_attach(struct megasas_instance *instance)
 	host->max_cmd_len = 16;
 
 	/* Fusion only supports host reset */
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+	if (instance->ctrl_context) {
 		host->hostt->eh_device_reset_handler = NULL;
 		host->hostt->eh_bus_reset_handler = NULL;
 	}
-	error = scsi_init_shared_tag_map(host, host->can_queue);
-	if (error) {
-		dev_err(&instance->pdev->dev,
-			"Failed to shared tag from %s %d\n",
-			__func__, __LINE__);
-		return -ENODEV;
-	}
 
 	/*
 	 * Notify the mid-layer about the new controller
@@ -5218,6 +5375,10 @@ static int megasas_probe_one(struct pci_dev *pdev,
 	case PCI_DEVICE_ID_LSI_PLASMA:
 	case PCI_DEVICE_ID_LSI_INVADER:
 	case PCI_DEVICE_ID_LSI_FURY:
+	case PCI_DEVICE_ID_LSI_INTRUDER:
+	case PCI_DEVICE_ID_LSI_INTRUDER_24:
+	case PCI_DEVICE_ID_LSI_CUTLASS_52:
+	case PCI_DEVICE_ID_LSI_CUTLASS_53:
 	{
 		instance->ctrl_context_pages =
 			get_order(sizeof(struct fusion_context));
@@ -5231,6 +5392,11 @@ static int megasas_probe_one(struct pci_dev *pdev,
 		fusion = instance->ctrl_context;
 		memset(fusion, 0,
 			((1 << PAGE_SHIFT) << instance->ctrl_context_pages));
+		if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
+			(instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA))
+			fusion->adapter_type = THUNDERBOLT_SERIES;
+		else
+			fusion->adapter_type = INVADER_SERIES;
 	}
 	break;
 	default: /* For all other supported controllers */
@@ -5333,10 +5499,7 @@ static int megasas_probe_one(struct pci_dev *pdev,
 	instance->disableOnlineCtrlReset = 1;
 	instance->UnevenSpanSupport = 0;
 
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+	if (instance->ctrl_context) {
 		INIT_WORK(&instance->work_init, megasas_fusion_ocr_wq);
 		INIT_WORK(&instance->crash_init, megasas_fusion_crash_dump_wq);
 	} else
@@ -5416,10 +5579,7 @@ fail_io_attach:
 	instance->instancet->disable_intr(instance);
 	megasas_destroy_irqs(instance);
 
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
+	if (instance->ctrl_context)
 		megasas_release_fusion(instance);
 	else
 		megasas_release_mfi(instance);
@@ -5506,10 +5666,14 @@ static void megasas_shutdown_controller(struct megasas_instance *instance,
 
 	if (instance->aen_cmd)
 		megasas_issue_blocked_abort_cmd(instance,
-			instance->aen_cmd, 30);
+			instance->aen_cmd, MEGASAS_BLOCKED_CMD_TIMEOUT);
 	if (instance->map_update_cmd)
 		megasas_issue_blocked_abort_cmd(instance,
-			instance->map_update_cmd, 30);
+			instance->map_update_cmd, MEGASAS_BLOCKED_CMD_TIMEOUT);
+	if (instance->jbod_seq_cmd)
+		megasas_issue_blocked_abort_cmd(instance,
+			instance->jbod_seq_cmd, MEGASAS_BLOCKED_CMD_TIMEOUT);
+
 	dcmd = &cmd->frame->dcmd;
 
 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
@@ -5628,12 +5792,7 @@ megasas_resume(struct pci_dev *pdev)
 				  instance->msix_vectors))
 		goto fail_reenable_msix;
 
-	switch (instance->pdev->device) {
-	case PCI_DEVICE_ID_LSI_FUSION:
-	case PCI_DEVICE_ID_LSI_PLASMA:
-	case PCI_DEVICE_ID_LSI_INVADER:
-	case PCI_DEVICE_ID_LSI_FURY:
-	{
+	if (instance->ctrl_context) {
 		megasas_reset_reply_desc(instance);
 		if (megasas_ioc_init_fusion(instance)) {
 			megasas_free_cmds(instance);
@@ -5642,14 +5801,11 @@ megasas_resume(struct pci_dev *pdev)
 		}
 		if (!megasas_get_map_info(instance))
 			megasas_sync_map_info(instance);
-	}
-	break;
-	default:
+	} else {
 		*instance->producer = 0;
 		*instance->consumer = 0;
 		if (megasas_issue_init_mfi(instance))
 			goto fail_init_mfi;
-		break;
 	}
 
 	tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
@@ -5674,6 +5830,7 @@ megasas_resume(struct pci_dev *pdev)
 	}
 
 	instance->instancet->enable_intr(instance);
+	megasas_setup_jbod_map(instance);
 	instance->unload = 0;
 
 	/*
@@ -5721,6 +5878,7 @@ static void megasas_detach_one(struct pci_dev *pdev)
 	struct Scsi_Host *host;
 	struct megasas_instance *instance;
 	struct fusion_context *fusion;
+	u32 pd_seq_map_sz;
 
 	instance = pci_get_drvdata(pdev);
 	instance->unload = 1;
@@ -5769,12 +5927,11 @@ static void megasas_detach_one(struct pci_dev *pdev)
 	if (instance->msix_vectors)
 		pci_disable_msix(instance->pdev);
 
-	switch (instance->pdev->device) {
-	case PCI_DEVICE_ID_LSI_FUSION:
-	case PCI_DEVICE_ID_LSI_PLASMA:
-	case PCI_DEVICE_ID_LSI_INVADER:
-	case PCI_DEVICE_ID_LSI_FURY:
+	if (instance->ctrl_context) {
 		megasas_release_fusion(instance);
+			pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
+				(sizeof(struct MR_PD_CFG_SEQ) *
+					(MAX_PHYSICAL_DEVICES - 1));
 		for (i = 0; i < 2 ; i++) {
 			if (fusion->ld_map[i])
 				dma_free_coherent(&instance->pdev->dev,
@@ -5784,11 +5941,15 @@ static void megasas_detach_one(struct pci_dev *pdev)
 			if (fusion->ld_drv_map[i])
 				free_pages((ulong)fusion->ld_drv_map[i],
 					fusion->drv_map_pages);
+				if (fusion->pd_seq_sync)
+					dma_free_coherent(&instance->pdev->dev,
+						pd_seq_map_sz,
+						fusion->pd_seq_sync[i],
+						fusion->pd_seq_phys[i]);
 		}
 		free_pages((ulong)instance->ctrl_context,
 			instance->ctrl_context_pages);
-		break;
-	default:
+	} else {
 		megasas_release_mfi(instance);
 		pci_free_consistent(pdev, sizeof(u32),
 				    instance->producer,
@@ -5796,7 +5957,6 @@ static void megasas_detach_one(struct pci_dev *pdev)
 		pci_free_consistent(pdev, sizeof(u32),
 				    instance->consumer,
 				    instance->consumer_h);
-		break;
 	}
 
 	kfree(instance->ctrl_info);
@@ -6316,6 +6476,9 @@ static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg)
 	int i;
 	int error = 0;
 	compat_uptr_t ptr;
+	unsigned long local_raw_ptr;
+	u32 local_sense_off;
+	u32 local_sense_len;
 
 	if (clear_user(ioc, sizeof(*ioc)))
 		return -EFAULT;
@@ -6333,9 +6496,15 @@ static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg)
 	 * sense_len is not null, so prepare the 64bit value under
 	 * the same condition.
 	 */
-	if (ioc->sense_len) {
+	if (get_user(local_raw_ptr, ioc->frame.raw) ||
+		get_user(local_sense_off, &ioc->sense_off) ||
+		get_user(local_sense_len, &ioc->sense_len))
+		return -EFAULT;
+
+
+	if (local_sense_len) {
 		void __user **sense_ioc_ptr =
-			(void __user **)(ioc->frame.raw + ioc->sense_off);
+			(void __user **)((u8*)local_raw_ptr + local_sense_off);
 		compat_uptr_t *sense_cioc_ptr =
 			(compat_uptr_t *)(cioc->frame.raw + cioc->sense_off);
 		if (get_user(ptr, sense_cioc_ptr) ||
@@ -6504,6 +6673,7 @@ megasas_aen_polling(struct work_struct *work)
 	instance->ev = NULL;
 	host = instance->host;
 	if (instance->evt_detail) {
+		megasas_decode_evt(instance);
 
 		switch (le32_to_cpu(instance->evt_detail->code)) {
 		case MR_EVT_PD_INSERTED:
@@ -6564,8 +6734,7 @@ megasas_aen_polling(struct work_struct *work)
 		case MR_EVT_CFG_CLEARED:
 		case MR_EVT_LD_DELETED:
 			if (!instance->requestorId ||
-			    (instance->requestorId &&
-			     megasas_get_ld_vf_affiliation(instance, 0))) {
+			    megasas_get_ld_vf_affiliation(instance, 0)) {
 				if (megasas_ld_list_query(instance,
 							  MR_LD_QUERY_TYPE_EXPOSED_TO_HOST))
 					megasas_get_ld_list(instance);
@@ -6596,8 +6765,7 @@ megasas_aen_polling(struct work_struct *work)
 			break;
 		case MR_EVT_LD_CREATED:
 			if (!instance->requestorId ||
-			    (instance->requestorId &&
-			     megasas_get_ld_vf_affiliation(instance, 0))) {
+			    megasas_get_ld_vf_affiliation(instance, 0)) {
 				if (megasas_ld_list_query(instance,
 							  MR_LD_QUERY_TYPE_EXPOSED_TO_HOST))
 					megasas_get_ld_list(instance);
@@ -6627,6 +6795,9 @@ megasas_aen_polling(struct work_struct *work)
 		case MR_EVT_LD_STATE_CHANGE:
 			doscan = 1;
 			break;
+		case MR_EVT_CTRL_PROP_CHANGED:
+			megasas_get_ctrl_info(instance);
+			break;
 		default:
 			doscan = 0;
 			break;
@@ -6663,8 +6834,7 @@ megasas_aen_polling(struct work_struct *work)
 		}
 
 		if (!instance->requestorId ||
-		    (instance->requestorId &&
-		     megasas_get_ld_vf_affiliation(instance, 0))) {
+		    megasas_get_ld_vf_affiliation(instance, 0)) {
 			if (megasas_ld_list_query(instance,
 						  MR_LD_QUERY_TYPE_EXPOSED_TO_HOST))
 				megasas_get_ld_list(instance);
diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c
index be57b1867..741509b35 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fp.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -741,14 +741,12 @@ static u8 mr_spanset_get_phy_params(struct megasas_instance *instance, u32 ld,
 	u8      physArm, span;
 	u64     row;
 	u8	retval = TRUE;
-	u8	do_invader = 0;
 	u64	*pdBlock = &io_info->pdBlock;
 	__le16	*pDevHandle = &io_info->devHandle;
 	u32	logArm, rowMod, armQ, arm;
+	struct fusion_context *fusion;
 
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER ||
-		instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
-		do_invader = 1;
+	fusion = instance->ctrl_context;
 
 	/*Get row and span from io_info for Uneven Span IO.*/
 	row	    = io_info->start_row;
@@ -779,7 +777,8 @@ static u8 mr_spanset_get_phy_params(struct megasas_instance *instance, u32 ld,
 	else {
 		*pDevHandle = cpu_to_le16(MR_PD_INVALID);
 		if ((raid->level >= 5) &&
-			(!do_invader  || (do_invader &&
+			((fusion->adapter_type == THUNDERBOLT_SERIES)  ||
+			((fusion->adapter_type == INVADER_SERIES) &&
 			(raid->regTypeReqOnRead != REGION_TYPE_UNUSED))))
 			pRAID_Context->regLockFlags = REGION_TYPE_EXCLUSIVE;
 		else if (raid->level == 1) {
@@ -823,13 +822,12 @@ u8 MR_GetPhyParams(struct megasas_instance *instance, u32 ld, u64 stripRow,
 	u8          physArm, span;
 	u64         row;
 	u8	    retval = TRUE;
-	u8          do_invader = 0;
 	u64	    *pdBlock = &io_info->pdBlock;
 	__le16	    *pDevHandle = &io_info->devHandle;
+	struct fusion_context *fusion;
+
+	fusion = instance->ctrl_context;
 
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER ||
-		instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
-		do_invader = 1;
 
 	row =  mega_div64_32(stripRow, raid->rowDataSize);
 
@@ -875,7 +873,8 @@ u8 MR_GetPhyParams(struct megasas_instance *instance, u32 ld, u64 stripRow,
 		/* set dev handle as invalid. */
 		*pDevHandle = cpu_to_le16(MR_PD_INVALID);
 		if ((raid->level >= 5) &&
-			(!do_invader  || (do_invader &&
+			((fusion->adapter_type == THUNDERBOLT_SERIES)  ||
+			((fusion->adapter_type == INVADER_SERIES) &&
 			(raid->regTypeReqOnRead != REGION_TYPE_UNUSED))))
 			pRAID_Context->regLockFlags = REGION_TYPE_EXCLUSIVE;
 		else if (raid->level == 1) {
@@ -909,6 +908,7 @@ MR_BuildRaidContext(struct megasas_instance *instance,
 		    struct RAID_CONTEXT *pRAID_Context,
 		    struct MR_DRV_RAID_MAP_ALL *map, u8 **raidLUN)
 {
+	struct fusion_context *fusion;
 	struct MR_LD_RAID  *raid;
 	u32         ld, stripSize, stripe_mask;
 	u64         endLba, endStrip, endRow, start_row, start_strip;
@@ -929,6 +929,7 @@ MR_BuildRaidContext(struct megasas_instance *instance,
 	isRead = io_info->isRead;
 	io_info->IoforUnevenSpan = 0;
 	io_info->start_span	= SPAN_INVALID;
+	fusion = instance->ctrl_context;
 
 	ld = MR_TargetIdToLdGet(ldTgtId, map);
 	raid = MR_LdRaidGet(ld, map);
@@ -1092,8 +1093,7 @@ MR_BuildRaidContext(struct megasas_instance *instance,
 		cpu_to_le16(raid->fpIoTimeoutForLd ?
 			    raid->fpIoTimeoutForLd :
 			    map->raidMap.fpPdIoTimeoutSec);
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
+	if (fusion->adapter_type == INVADER_SERIES)
 		pRAID_Context->regLockFlags = (isRead) ?
 			raid->regTypeReqOnRead : raid->regTypeReqOnWrite;
 	else
@@ -1198,10 +1198,6 @@ void mr_update_span_set(struct MR_DRV_RAID_MAP_ALL *map,
 						span_row_width +=
 							MR_LdSpanPtrGet
 							(ld, count, map)->spanRowDataSize;
-						printk(KERN_INFO "megasas:"
-							"span %x rowDataSize %x\n",
-							count, MR_LdSpanPtrGet
-							(ld, count, map)->spanRowDataSize);
 					}
 				}
 
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index f0837cc3b..8d630a552 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -316,26 +316,23 @@ static int megasas_create_frame_pool_fusion(struct megasas_instance *instance)
 	u32 max_cmd;
 	struct fusion_context *fusion;
 	struct megasas_cmd_fusion *cmd;
-	u32 total_sz_chain_frame;
 
 	fusion = instance->ctrl_context;
 	max_cmd = instance->max_fw_cmds;
 
-	total_sz_chain_frame = MEGASAS_MAX_SZ_CHAIN_FRAME;
 
 	/*
 	 * Use DMA pool facility provided by PCI layer
 	 */
 
-	fusion->sg_dma_pool = pci_pool_create("megasas sg pool fusion",
-					      instance->pdev,
-					      total_sz_chain_frame, 4,
-					      0);
+	fusion->sg_dma_pool = pci_pool_create("sg_pool_fusion", instance->pdev,
+						instance->max_chain_frame_sz,
+						4, 0);
 	if (!fusion->sg_dma_pool) {
 		dev_printk(KERN_DEBUG, &instance->pdev->dev, "failed to setup request pool fusion\n");
 		return -ENOMEM;
 	}
-	fusion->sense_dma_pool = pci_pool_create("megasas sense pool fusion",
+	fusion->sense_dma_pool = pci_pool_create("sense pool fusion",
 						 instance->pdev,
 						 SCSI_SENSE_BUFFERSIZE, 64, 0);
 
@@ -605,6 +602,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
 	int i;
 	struct megasas_header *frame_hdr;
 	const char *sys_info;
+	MFI_CAPABILITIES *drv_ops;
 
 	fusion = instance->ctrl_context;
 
@@ -652,20 +650,21 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
 	init_frame->cmd	= MFI_CMD_INIT;
 	init_frame->cmd_status = 0xFF;
 
+	drv_ops = (MFI_CAPABILITIES *) &(init_frame->driver_operations);
+
 	/* driver support Extended MSIX */
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
-		init_frame->driver_operations.
-			mfi_capabilities.support_additional_msix = 1;
+	if (fusion->adapter_type == INVADER_SERIES)
+		drv_ops->mfi_capabilities.support_additional_msix = 1;
 	/* driver supports HA / Remote LUN over Fast Path interface */
-	init_frame->driver_operations.mfi_capabilities.support_fp_remote_lun
-		= 1;
-	init_frame->driver_operations.mfi_capabilities.support_max_255lds
-		= 1;
-	init_frame->driver_operations.mfi_capabilities.support_ndrive_r1_lb
-		= 1;
-	init_frame->driver_operations.mfi_capabilities.security_protocol_cmds_fw
-		= 1;
+	drv_ops->mfi_capabilities.support_fp_remote_lun = 1;
+
+	drv_ops->mfi_capabilities.support_max_255lds = 1;
+	drv_ops->mfi_capabilities.support_ndrive_r1_lb = 1;
+	drv_ops->mfi_capabilities.security_protocol_cmds_fw = 1;
+
+	if (instance->max_chain_frame_sz > MEGASAS_CHAIN_FRAME_SZ_MIN)
+		drv_ops->mfi_capabilities.support_ext_io_size = 1;
+
 	/* Convert capability to LE32 */
 	cpu_to_le32s((u32 *)&init_frame->driver_operations.mfi_capabilities);
 
@@ -726,6 +725,83 @@ fail_get_cmd:
 	return ret;
 }
 
+/**
+ * megasas_sync_pd_seq_num -	JBOD SEQ MAP
+ * @instance:		Adapter soft state
+ * @pend:		set to 1, if it is pended jbod map.
+ *
+ * Issue Jbod map to the firmware. If it is pended command,
+ * issue command and return. If it is first instance of jbod map
+ * issue and receive command.
+ */
+int
+megasas_sync_pd_seq_num(struct megasas_instance *instance, bool pend) {
+	int ret = 0;
+	u32 pd_seq_map_sz;
+	struct megasas_cmd *cmd;
+	struct megasas_dcmd_frame *dcmd;
+	struct fusion_context *fusion = instance->ctrl_context;
+	struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync;
+	dma_addr_t pd_seq_h;
+
+	pd_sync = (void *)fusion->pd_seq_sync[(instance->pd_seq_map_id & 1)];
+	pd_seq_h = fusion->pd_seq_phys[(instance->pd_seq_map_id & 1)];
+	pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
+			(sizeof(struct MR_PD_CFG_SEQ) *
+			(MAX_PHYSICAL_DEVICES - 1));
+
+	cmd = megasas_get_cmd(instance);
+	if (!cmd) {
+		dev_err(&instance->pdev->dev,
+			"Could not get mfi cmd. Fail from %s %d\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	dcmd = &cmd->frame->dcmd;
+
+	memset(pd_sync, 0, pd_seq_map_sz);
+	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+	dcmd->cmd = MFI_CMD_DCMD;
+	dcmd->cmd_status = 0xFF;
+	dcmd->sge_count = 1;
+	dcmd->timeout = 0;
+	dcmd->pad_0 = 0;
+	dcmd->data_xfer_len = cpu_to_le32(pd_seq_map_sz);
+	dcmd->opcode = cpu_to_le32(MR_DCMD_SYSTEM_PD_MAP_GET_INFO);
+	dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(pd_seq_h);
+	dcmd->sgl.sge32[0].length = cpu_to_le32(pd_seq_map_sz);
+
+	if (pend) {
+		dcmd->mbox.b[0] = MEGASAS_DCMD_MBOX_PEND_FLAG;
+		dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_WRITE);
+		instance->jbod_seq_cmd = cmd;
+		instance->instancet->issue_dcmd(instance, cmd);
+		return 0;
+	}
+
+	dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
+
+	/* Below code is only for non pended DCMD */
+	if (instance->ctrl_context && !instance->mask_interrupts)
+		ret = megasas_issue_blocked_cmd(instance, cmd, 60);
+	else
+		ret = megasas_issue_polled(instance, cmd);
+
+	if (le32_to_cpu(pd_sync->count) > MAX_PHYSICAL_DEVICES) {
+		dev_warn(&instance->pdev->dev,
+			"driver supports max %d JBOD, but FW reports %d\n",
+			MAX_PHYSICAL_DEVICES, le32_to_cpu(pd_sync->count));
+		ret = -EINVAL;
+	}
+
+	if (!ret)
+		instance->pd_seq_map_id++;
+
+	megasas_return_cmd(instance, cmd);
+	return ret;
+}
+
 /*
  * megasas_get_ld_map_info -	Returns FW's ld_map structure
  * @instance:				Adapter soft state
@@ -961,6 +1037,18 @@ megasas_display_intel_branding(struct megasas_instance *instance)
 			break;
 		}
 		break;
+	case PCI_DEVICE_ID_LSI_CUTLASS_52:
+	case PCI_DEVICE_ID_LSI_CUTLASS_53:
+		switch (instance->pdev->subsystem_device) {
+		case MEGARAID_INTEL_RMS3BC160_SSDID:
+			dev_info(&instance->pdev->dev, "scsi host %d: %s\n",
+				instance->host->host_no,
+				MEGARAID_INTEL_RMS3BC160_BRANDING);
+			break;
+		default:
+			break;
+		}
+		break;
 	default:
 		break;
 	}
@@ -977,7 +1065,7 @@ megasas_init_adapter_fusion(struct megasas_instance *instance)
 {
 	struct megasas_register_set __iomem *reg_set;
 	struct fusion_context *fusion;
-	u32 max_cmd;
+	u32 max_cmd, scratch_pad_2;
 	int i = 0, count;
 
 	fusion = instance->ctrl_context;
@@ -1016,15 +1104,40 @@ megasas_init_adapter_fusion(struct megasas_instance *instance)
 		(MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE *
 		 (max_cmd + 1)); /* Extra 1 for SMID 0 */
 
+	scratch_pad_2 = readl(&instance->reg_set->outbound_scratch_pad_2);
+	/* If scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK is set,
+	 * Firmware support extended IO chain frame which is 4 times more than
+	 * legacy Firmware.
+	 * Legacy Firmware - Frame size is (8 * 128) = 1K
+	 * 1M IO Firmware  - Frame size is (8 * 128 * 4)  = 4K
+	 */
+	if (scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK)
+		instance->max_chain_frame_sz =
+			((scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_MASK) >>
+			MEGASAS_MAX_CHAIN_SHIFT) * MEGASAS_1MB_IO;
+	else
+		instance->max_chain_frame_sz =
+			((scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_MASK) >>
+			MEGASAS_MAX_CHAIN_SHIFT) * MEGASAS_256K_IO;
+
+	if (instance->max_chain_frame_sz < MEGASAS_CHAIN_FRAME_SZ_MIN) {
+		dev_warn(&instance->pdev->dev, "frame size %d invalid, fall back to legacy max frame size %d\n",
+			instance->max_chain_frame_sz,
+			MEGASAS_CHAIN_FRAME_SZ_MIN);
+		instance->max_chain_frame_sz = MEGASAS_CHAIN_FRAME_SZ_MIN;
+	}
+
 	fusion->max_sge_in_main_msg =
-	  (MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE -
-	   offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL))/16;
+		(MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE
+			- offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL))/16;
 
 	fusion->max_sge_in_chain =
-		MEGASAS_MAX_SZ_CHAIN_FRAME / sizeof(union MPI2_SGE_IO_UNION);
+		instance->max_chain_frame_sz
+			/ sizeof(union MPI2_SGE_IO_UNION);
 
-	instance->max_num_sge = rounddown_pow_of_two(
-		fusion->max_sge_in_main_msg + fusion->max_sge_in_chain - 2);
+	instance->max_num_sge =
+		rounddown_pow_of_two(fusion->max_sge_in_main_msg
+			+ fusion->max_sge_in_chain - 2);
 
 	/* Used for pass thru MFI frame (DCMD) */
 	fusion->chain_offset_mfi_pthru =
@@ -1186,8 +1299,7 @@ megasas_make_sgl_fusion(struct megasas_instance *instance,
 
 	fusion = instance->ctrl_context;
 
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+	if (fusion->adapter_type == INVADER_SERIES) {
 		struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr_end = sgl_ptr;
 		sgl_ptr_end += fusion->max_sge_in_main_msg - 1;
 		sgl_ptr_end->Flags = 0;
@@ -1204,11 +1316,9 @@ megasas_make_sgl_fusion(struct megasas_instance *instance,
 		sgl_ptr->Length = cpu_to_le32(sg_dma_len(os_sgl));
 		sgl_ptr->Address = cpu_to_le64(sg_dma_address(os_sgl));
 		sgl_ptr->Flags = 0;
-		if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-			(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+		if (fusion->adapter_type == INVADER_SERIES)
 			if (i == sge_count - 1)
 				sgl_ptr->Flags = IEEE_SGE_FLAGS_END_OF_LIST;
-		}
 		sgl_ptr++;
 
 		sg_processed = i + 1;
@@ -1217,10 +1327,7 @@ megasas_make_sgl_fusion(struct megasas_instance *instance,
 		    (sge_count > fusion->max_sge_in_main_msg)) {
 
 			struct MPI25_IEEE_SGE_CHAIN64 *sg_chain;
-			if ((instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_INVADER) ||
-				(instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_FURY)) {
+			if (fusion->adapter_type == INVADER_SERIES) {
 				if ((le16_to_cpu(cmd->io_request->IoFlags) &
 					MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) !=
 					MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH)
@@ -1236,10 +1343,7 @@ megasas_make_sgl_fusion(struct megasas_instance *instance,
 			sg_chain = sgl_ptr;
 			/* Prepare chain element */
 			sg_chain->NextChainOffset = 0;
-			if ((instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_INVADER) ||
-				(instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_FURY))
+			if (fusion->adapter_type == INVADER_SERIES)
 				sg_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT;
 			else
 				sg_chain->Flags =
@@ -1250,7 +1354,7 @@ megasas_make_sgl_fusion(struct megasas_instance *instance,
 
 			sgl_ptr =
 			  (struct MPI25_IEEE_SGE_CHAIN64 *)cmd->sg_frame;
-			memset(sgl_ptr, 0, MEGASAS_MAX_SZ_CHAIN_FRAME);
+			memset(sgl_ptr, 0, instance->max_chain_frame_sz);
 		}
 	}
 
@@ -1556,8 +1660,7 @@ megasas_build_ldio_fusion(struct megasas_instance *instance,
 		cmd->request_desc->SCSIIO.RequestFlags =
 			(MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY
 			 << MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
-		if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-			(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+		if (fusion->adapter_type == INVADER_SERIES) {
 			if (io_request->RaidContext.regLockFlags ==
 			    REGION_TYPE_UNUSED)
 				cmd->request_desc->SCSIIO.RequestFlags =
@@ -1582,7 +1685,7 @@ megasas_build_ldio_fusion(struct megasas_instance *instance,
 			scp->SCp.Status &= ~MEGASAS_LOAD_BALANCE_FLAG;
 
 		if ((raidLUN[0] == 1) &&
-			(local_map_ptr->raidMap.devHndlInfo[io_info.pd_after_lb].validHandles > 2)) {
+			(local_map_ptr->raidMap.devHndlInfo[io_info.pd_after_lb].validHandles > 1)) {
 			instance->dev_handle = !(instance->dev_handle);
 			io_info.devHandle =
 				local_map_ptr->raidMap.devHndlInfo[io_info.pd_after_lb].devHandle[instance->dev_handle];
@@ -1598,8 +1701,7 @@ megasas_build_ldio_fusion(struct megasas_instance *instance,
 		cmd->request_desc->SCSIIO.RequestFlags =
 			(MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO
 			 << MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
-		if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-			(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+		if (fusion->adapter_type == INVADER_SERIES) {
 			if (io_request->RaidContext.regLockFlags ==
 			    REGION_TYPE_UNUSED)
 				cmd->request_desc->SCSIIO.RequestFlags =
@@ -1722,7 +1824,9 @@ megasas_build_syspd_fusion(struct megasas_instance *instance,
 	u16 timeout_limit;
 	struct MR_DRV_RAID_MAP_ALL *local_map_ptr;
 	struct RAID_CONTEXT	*pRAID_Context;
+	struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync;
 	struct fusion_context *fusion = instance->ctrl_context;
+	pd_sync = (void *)fusion->pd_seq_sync[(instance->pd_seq_map_id - 1) & 1];
 
 	device_id = MEGASAS_DEV_INDEX(scmd);
 	pd_index = MEGASAS_PD_INDEX(scmd);
@@ -1731,16 +1835,38 @@ megasas_build_syspd_fusion(struct megasas_instance *instance,
 	io_request = cmd->io_request;
 	/* get RAID_Context pointer */
 	pRAID_Context = &io_request->RaidContext;
+	pRAID_Context->regLockFlags = 0;
+	pRAID_Context->regLockRowLBA = 0;
+	pRAID_Context->regLockLength = 0;
 	io_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
 	io_request->LUN[1] = scmd->device->lun;
 	pRAID_Context->RAIDFlags = MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD
 		<< MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT;
 
-	pRAID_Context->VirtualDiskTgtId = cpu_to_le16(device_id);
-	pRAID_Context->configSeqNum = 0;
-	local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)];
-	io_request->DevHandle =
-		local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
+	/* If FW supports PD sequence number */
+	if (instance->use_seqnum_jbod_fp &&
+		instance->pd_list[pd_index].driveType == TYPE_DISK) {
+		/* TgtId must be incremented by 255 as jbod seq number is index
+		 * below raid map
+		 */
+		pRAID_Context->VirtualDiskTgtId =
+			cpu_to_le16(device_id + (MAX_PHYSICAL_DEVICES - 1));
+		pRAID_Context->configSeqNum = pd_sync->seq[pd_index].seqNum;
+		io_request->DevHandle = pd_sync->seq[pd_index].devHandle;
+		pRAID_Context->regLockFlags |=
+			(MR_RL_FLAGS_SEQ_NUM_ENABLE|MR_RL_FLAGS_GRANT_DESTINATION_CUDA);
+	} else if (fusion->fast_path_io) {
+		pRAID_Context->VirtualDiskTgtId = cpu_to_le16(device_id);
+		pRAID_Context->configSeqNum = 0;
+		local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)];
+		io_request->DevHandle =
+			local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
+	} else {
+		/* Want to send all IO via FW path */
+		pRAID_Context->VirtualDiskTgtId = cpu_to_le16(device_id);
+		pRAID_Context->configSeqNum = 0;
+		io_request->DevHandle = cpu_to_le16(0xFFFF);
+	}
 
 	cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle;
 	cmd->request_desc->SCSIIO.MSIxIndex =
@@ -1755,22 +1881,16 @@ megasas_build_syspd_fusion(struct megasas_instance *instance,
 			(MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
 				MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
 		pRAID_Context->timeoutValue = cpu_to_le16(os_timeout_value);
+		pRAID_Context->VirtualDiskTgtId = cpu_to_le16(device_id);
 	} else {
 		/* system pd Fast Path */
 		io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
-		pRAID_Context->regLockFlags = 0;
-		pRAID_Context->regLockRowLBA = 0;
-		pRAID_Context->regLockLength = 0;
 		timeout_limit = (scmd->device->type == TYPE_DISK) ?
 				255 : 0xFFFF;
 		pRAID_Context->timeoutValue =
 			cpu_to_le16((os_timeout_value > timeout_limit) ?
 			timeout_limit : os_timeout_value);
-		if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-			(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
-			cmd->request_desc->SCSIIO.RequestFlags |=
-				(MEGASAS_REQ_DESCRIPT_FLAGS_NO_LOCK <<
-				MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+		if (fusion->adapter_type == INVADER_SERIES) {
 			pRAID_Context->Type = MPI2_TYPE_CUDA;
 			pRAID_Context->nseg = 0x1;
 			io_request->IoFlags |=
@@ -1796,7 +1916,7 @@ megasas_build_io_fusion(struct megasas_instance *instance,
 			struct scsi_cmnd *scp,
 			struct megasas_cmd_fusion *cmd)
 {
-	u32 sge_count;
+	u16 sge_count;
 	u8  cmd_type;
 	struct MPI2_RAID_SCSI_IO_REQUEST *io_request = cmd->io_request;
 
@@ -1854,7 +1974,11 @@ megasas_build_io_fusion(struct megasas_instance *instance,
 		return 1;
 	}
 
+	/* numSGE store lower 8 bit of sge_count.
+	 * numSGEExt store higher 8 bit of sge_count
+	 */
 	io_request->RaidContext.numSGE = sge_count;
+	io_request->RaidContext.numSGEExt = (u8)(sge_count >> 8);
 
 	io_request->SGLFlags = cpu_to_le16(MPI2_SGE_FLAGS_64_BIT_ADDRESSING);
 
@@ -2084,10 +2208,7 @@ complete_cmd_fusion(struct megasas_instance *instance, u32 MSIxIndex)
 		 * pending to be completed
 		 */
 		if (threshold_reply_count >= THRESHOLD_REPLY_COUNT) {
-			if ((instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_INVADER) ||
-				(instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_FURY))
+			if (fusion->adapter_type == INVADER_SERIES)
 				writel(((MSIxIndex & 0x7) << 24) |
 					fusion->last_reply_idx[MSIxIndex],
 					instance->reply_post_host_index_addr[MSIxIndex/8]);
@@ -2103,8 +2224,7 @@ complete_cmd_fusion(struct megasas_instance *instance, u32 MSIxIndex)
 		return IRQ_NONE;
 
 	wmb();
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
+	if (fusion->adapter_type == INVADER_SERIES)
 		writel(((MSIxIndex & 0x7) << 24) |
 			fusion->last_reply_idx[MSIxIndex],
 			instance->reply_post_host_index_addr[MSIxIndex/8]);
@@ -2227,8 +2347,7 @@ build_mpt_mfi_pass_thru(struct megasas_instance *instance,
 
 	io_req = cmd->io_request;
 
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+	if (fusion->adapter_type == INVADER_SERIES) {
 		struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr_end =
 			(struct MPI25_IEEE_SGE_CHAIN64 *)&io_req->SGL;
 		sgl_ptr_end += fusion->max_sge_in_main_msg - 1;
@@ -2248,7 +2367,7 @@ build_mpt_mfi_pass_thru(struct megasas_instance *instance,
 	mpi25_ieee_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT |
 		MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR;
 
-	mpi25_ieee_chain->Length = cpu_to_le32(MEGASAS_MAX_SZ_CHAIN_FRAME);
+	mpi25_ieee_chain->Length = cpu_to_le32(instance->max_chain_frame_sz);
 
 	return 0;
 }
@@ -2384,6 +2503,70 @@ static int
 megasas_adp_reset_fusion(struct megasas_instance *instance,
 			 struct megasas_register_set __iomem *regs)
 {
+	u32 host_diag, abs_state, retry;
+
+	/* Now try to reset the chip */
+	writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+	writel(MPI2_WRSEQ_1ST_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+	writel(MPI2_WRSEQ_2ND_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+	writel(MPI2_WRSEQ_3RD_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+	writel(MPI2_WRSEQ_4TH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+	writel(MPI2_WRSEQ_5TH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+	writel(MPI2_WRSEQ_6TH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
+
+	/* Check that the diag write enable (DRWE) bit is on */
+	host_diag = readl(&instance->reg_set->fusion_host_diag);
+	retry = 0;
+	while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) {
+		msleep(100);
+		host_diag = readl(&instance->reg_set->fusion_host_diag);
+		if (retry++ == 100) {
+			dev_warn(&instance->pdev->dev,
+				"Host diag unlock failed from %s %d\n",
+				__func__, __LINE__);
+			break;
+		}
+	}
+	if (!(host_diag & HOST_DIAG_WRITE_ENABLE))
+		return -1;
+
+	/* Send chip reset command */
+	writel(host_diag | HOST_DIAG_RESET_ADAPTER,
+		&instance->reg_set->fusion_host_diag);
+	msleep(3000);
+
+	/* Make sure reset adapter bit is cleared */
+	host_diag = readl(&instance->reg_set->fusion_host_diag);
+	retry = 0;
+	while (host_diag & HOST_DIAG_RESET_ADAPTER) {
+		msleep(100);
+		host_diag = readl(&instance->reg_set->fusion_host_diag);
+		if (retry++ == 1000) {
+			dev_warn(&instance->pdev->dev,
+				"Diag reset adapter never cleared %s %d\n",
+				__func__, __LINE__);
+			break;
+		}
+	}
+	if (host_diag & HOST_DIAG_RESET_ADAPTER)
+		return -1;
+
+	abs_state = instance->instancet->read_fw_status_reg(instance->reg_set)
+			& MFI_STATE_MASK;
+	retry = 0;
+
+	while ((abs_state <= MFI_STATE_FW_INIT) && (retry++ < 1000)) {
+		msleep(100);
+		abs_state = instance->instancet->
+			read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
+	}
+	if (abs_state <= MFI_STATE_FW_INIT) {
+		dev_warn(&instance->pdev->dev,
+			"fw state < MFI_STATE_FW_INIT, state = 0x%x %s %d\n",
+			abs_state, __func__, __LINE__);
+		return -1;
+	}
+
 	return 0;
 }
 
@@ -2512,8 +2695,10 @@ void megasas_refire_mgmt_cmd(struct megasas_instance *instance)
 			continue;
 		req_desc = megasas_get_request_descriptor
 					(instance, smid - 1);
-		if (req_desc && (cmd_mfi->frame->dcmd.opcode !=
-				cpu_to_le32(MR_DCMD_LD_MAP_GET_INFO)))
+		if (req_desc && ((cmd_mfi->frame->dcmd.opcode !=
+				cpu_to_le32(MR_DCMD_LD_MAP_GET_INFO)) &&
+				 (cmd_mfi->frame->dcmd.opcode !=
+				cpu_to_le32(MR_DCMD_SYSTEM_PD_MAP_GET_INFO))))
 			megasas_fire_cmd_fusion(instance, req_desc);
 		else
 			megasas_return_cmd(instance, cmd_mfi);
@@ -2547,11 +2732,11 @@ out:
 /* Core fusion reset function */
 int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
 {
-	int retval = SUCCESS, i, retry = 0, convert = 0;
+	int retval = SUCCESS, i, convert = 0;
 	struct megasas_instance *instance;
 	struct megasas_cmd_fusion *cmd_fusion;
 	struct fusion_context *fusion;
-	u32 host_diag, abs_state, status_reg, reset_adapter;
+	u32 abs_state, status_reg, reset_adapter;
 	u32 io_timeout_in_crash_mode = 0;
 	struct scsi_cmnd *scmd_local = NULL;
 
@@ -2705,82 +2890,11 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
 
 		/* Now try to reset the chip */
 		for (i = 0; i < MEGASAS_FUSION_MAX_RESET_TRIES; i++) {
-			writel(MPI2_WRSEQ_FLUSH_KEY_VALUE,
-			       &instance->reg_set->fusion_seq_offset);
-			writel(MPI2_WRSEQ_1ST_KEY_VALUE,
-			       &instance->reg_set->fusion_seq_offset);
-			writel(MPI2_WRSEQ_2ND_KEY_VALUE,
-			       &instance->reg_set->fusion_seq_offset);
-			writel(MPI2_WRSEQ_3RD_KEY_VALUE,
-			       &instance->reg_set->fusion_seq_offset);
-			writel(MPI2_WRSEQ_4TH_KEY_VALUE,
-			       &instance->reg_set->fusion_seq_offset);
-			writel(MPI2_WRSEQ_5TH_KEY_VALUE,
-			       &instance->reg_set->fusion_seq_offset);
-			writel(MPI2_WRSEQ_6TH_KEY_VALUE,
-			       &instance->reg_set->fusion_seq_offset);
-
-			/* Check that the diag write enable (DRWE) bit is on */
-			host_diag = readl(&instance->reg_set->fusion_host_diag);
-			retry = 0;
-			while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) {
-				msleep(100);
-				host_diag =
-				readl(&instance->reg_set->fusion_host_diag);
-				if (retry++ == 100) {
-					dev_warn(&instance->pdev->dev,
-					       "Host diag unlock failed! "
-					       "for scsi%d\n",
-						instance->host->host_no);
-					break;
-				}
-			}
-			if (!(host_diag & HOST_DIAG_WRITE_ENABLE))
-				continue;
 
-			/* Send chip reset command */
-			writel(host_diag | HOST_DIAG_RESET_ADAPTER,
-			       &instance->reg_set->fusion_host_diag);
-			msleep(3000);
-
-			/* Make sure reset adapter bit is cleared */
-			host_diag = readl(&instance->reg_set->fusion_host_diag);
-			retry = 0;
-			while (host_diag & HOST_DIAG_RESET_ADAPTER) {
-				msleep(100);
-				host_diag =
-				readl(&instance->reg_set->fusion_host_diag);
-				if (retry++ == 1000) {
-					dev_warn(&instance->pdev->dev,
-					       "Diag reset adapter never "
-					       "cleared for scsi%d!\n",
-						instance->host->host_no);
-					break;
-				}
-			}
-			if (host_diag & HOST_DIAG_RESET_ADAPTER)
+			if (instance->instancet->adp_reset
+				(instance, instance->reg_set))
 				continue;
 
-			abs_state =
-				instance->instancet->read_fw_status_reg(
-					instance->reg_set) & MFI_STATE_MASK;
-			retry = 0;
-
-			while ((abs_state <= MFI_STATE_FW_INIT) &&
-			       (retry++ < 1000)) {
-				msleep(100);
-				abs_state =
-				instance->instancet->read_fw_status_reg(
-					instance->reg_set) & MFI_STATE_MASK;
-			}
-			if (abs_state <= MFI_STATE_FW_INIT) {
-				dev_warn(&instance->pdev->dev, "firmware "
-				       "state < MFI_STATE_FW_INIT, state = "
-				       "0x%x for scsi%d\n", abs_state,
-					instance->host->host_no);
-				continue;
-			}
-
 			/* Wait for FW to become ready */
 			if (megasas_transition_to_ready(instance, 1)) {
 				dev_warn(&instance->pdev->dev, "Failed to "
@@ -2816,6 +2930,8 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
 			if (!megasas_get_map_info(instance))
 				megasas_sync_map_info(instance);
 
+			megasas_setup_jbod_map(instance);
+
 			clear_bit(MEGASAS_FUSION_IN_RESET,
 				  &instance->reset_flags);
 			instance->instancet->enable_intr(instance);
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h
index ced6dc0cf..473005c99 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.h
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h
@@ -35,8 +35,13 @@
 #define _MEGARAID_SAS_FUSION_H_
 
 /* Fusion defines */
-#define MEGASAS_MAX_SZ_CHAIN_FRAME 1024
+#define MEGASAS_CHAIN_FRAME_SZ_MIN 1024
 #define MFI_FUSION_ENABLE_INTERRUPT_MASK (0x00000009)
+#define MEGASAS_MAX_CHAIN_SHIFT			5
+#define MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK	0x400000
+#define MEGASAS_MAX_CHAIN_SIZE_MASK		0x3E0
+#define MEGASAS_256K_IO				128
+#define MEGASAS_1MB_IO				(MEGASAS_256K_IO * 4)
 #define MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE 256
 #define MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST   0xF0
 #define MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST         0xF1
@@ -89,6 +94,12 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE {
 #define MEGASAS_FP_CMD_LEN	16
 #define MEGASAS_FUSION_IN_RESET 0
 #define THRESHOLD_REPLY_COUNT 50
+#define JBOD_MAPS_COUNT	2
+
+enum MR_FUSION_ADAPTER_TYPE {
+	THUNDERBOLT_SERIES = 0,
+	INVADER_SERIES = 1,
+};
 
 /*
  * Raid Context structure which describes MegaRAID specific IO Parameters
@@ -117,7 +128,9 @@ struct RAID_CONTEXT {
 	u8      numSGE;
 	__le16	configSeqNum;
 	u8      spanArm;
-	u8      resvd2[3];
+	u8      priority;
+	u8	numSGEExt;
+	u8      resvd2;
 };
 
 #define RAID_CTX_SPANARM_ARM_SHIFT	(0)
@@ -486,6 +499,7 @@ struct MPI2_IOC_INIT_REQUEST {
 #define MAX_PHYSICAL_DEVICES 256
 #define MAX_RAIDMAP_PHYSICAL_DEVICES (MAX_PHYSICAL_DEVICES)
 #define MR_DCMD_LD_MAP_GET_INFO             0x0300e101
+#define MR_DCMD_SYSTEM_PD_MAP_GET_INFO      0x0200e102
 #define MR_DCMD_CTRL_SHARED_HOST_MEM_ALLOC  0x010e8485   /* SR-IOV HB alloc*/
 #define MR_DCMD_LD_VF_MAP_GET_ALL_LDS_111   0x03200200
 #define MR_DCMD_LD_VF_MAP_GET_ALL_LDS       0x03150200
@@ -789,6 +803,21 @@ struct MR_FW_RAID_MAP_EXT {
 	struct MR_LD_SPAN_MAP      ldSpanMap[MAX_LOGICAL_DRIVES_EXT];
 };
 
+/*
+ *  * define MR_PD_CFG_SEQ structure for system PDs
+ *   */
+struct MR_PD_CFG_SEQ {
+	__le16 seqNum;
+	__le16 devHandle;
+	u8  reserved[4];
+} __packed;
+
+struct MR_PD_CFG_SEQ_NUM_SYNC {
+	__le32 size;
+	__le32 count;
+	struct MR_PD_CFG_SEQ seq[1];
+} __packed;
+
 struct fusion_context {
 	struct megasas_cmd_fusion **cmd_list;
 	dma_addr_t req_frames_desc_phys;
@@ -828,9 +857,12 @@ struct fusion_context {
 	u32 current_map_sz;
 	u32 drv_map_sz;
 	u32 drv_map_pages;
+	struct MR_PD_CFG_SEQ_NUM_SYNC	*pd_seq_sync[JBOD_MAPS_COUNT];
+	dma_addr_t pd_seq_phys[JBOD_MAPS_COUNT];
 	u8 fast_path_io;
 	struct LD_LOAD_BALANCE_INFO load_balance_info[MAX_LOGICAL_DRIVES_EXT];
 	LD_SPAN_INFO log_to_span[MAX_LOGICAL_DRIVES_EXT];
+	u8 adapter_type;
 };
 
 union desc_value {
diff --git a/drivers/scsi/mpt2sas/Kconfig b/drivers/scsi/mpt2sas/Kconfig
deleted file mode 100644
index 657b45ca0..000000000
--- a/drivers/scsi/mpt2sas/Kconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-#
-# Kernel configuration file for the MPT2SAS
-#
-# This code is based on drivers/scsi/mpt2sas/Kconfig
-# Copyright (C) 2007-2014  LSI Corporation
-#  (mailto:DL-MPTFusionLinux@lsi.com)
-
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# NO WARRANTY
-# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-# solely responsible for determining the appropriateness of using and
-# distributing the Program and assumes all risks associated with its
-# exercise of rights under this Agreement, including but not limited to
-# the risks and costs of program errors, damage to or loss of data,
-# programs or equipment, and unavailability or interruption of operations.
-
-# DISCLAIMER OF LIABILITY
-# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
-# USA.
-
-config SCSI_MPT2SAS
-	tristate "LSI MPT Fusion SAS 2.0 Device Driver"
-	depends on PCI && SCSI
-	select SCSI_SAS_ATTRS
-	select RAID_ATTRS
-	---help---
-	This driver supports PCI-Express SAS 6Gb/s Host Adapters.
-
-config SCSI_MPT2SAS_MAX_SGE
-	int "LSI MPT Fusion Max number of SG Entries (16 - 128)"
-	depends on PCI && SCSI && SCSI_MPT2SAS
-	default "128"
-	range 16 128
-	---help---
-	This option allows you to specify the maximum number of scatter-
-	gather entries per I/O. The driver default is 128, which matches
-	SAFE_PHYS_SEGMENTS.  However, it may decreased down to 16.
-	Decreasing this parameter will reduce memory requirements
-	on a per controller instance.
-
-config SCSI_MPT2SAS_LOGGING
-	bool "LSI MPT Fusion logging facility"
-	depends on PCI && SCSI && SCSI_MPT2SAS
-	---help---
-	This turns on a logging facility.
diff --git a/drivers/scsi/mpt2sas/Makefile b/drivers/scsi/mpt2sas/Makefile
deleted file mode 100644
index 728f04757..000000000
--- a/drivers/scsi/mpt2sas/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# mpt2sas makefile
-obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas.o
-mpt2sas-y +=  mpt2sas_base.o        \
-		mpt2sas_config.o    \
-		mpt2sas_scsih.o     \
-		mpt2sas_transport.o \
-		mpt2sas_ctl.o
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h
deleted file mode 100644
index 7fc6f23bd..000000000
--- a/drivers/scsi/mpt2sas/mpi/mpi2.h
+++ /dev/null
@@ -1,1170 +0,0 @@
-/*
- *  Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- *           Name:  mpi2.h
- *          Title:  MPI Message independent structures and definitions
- *                  including System Interface Register Set and
- *                  scatter/gather formats.
- *  Creation Date:  June 21, 2006
- *
- *  mpi2.h Version:  02.00.35
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  06-04-07  02.00.01  Bumped MPI2_HEADER_VERSION_UNIT.
- *  06-26-07  02.00.02  Bumped MPI2_HEADER_VERSION_UNIT.
- *  08-31-07  02.00.03  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Moved ReplyPostHostIndex register to offset 0x6C of the
- *                      MPI2_SYSTEM_INTERFACE_REGS and modified the define for
- *                      MPI2_REPLY_POST_HOST_INDEX_OFFSET.
- *                      Added union of request descriptors.
- *                      Added union of reply descriptors.
- *  10-31-07  02.00.04  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Added define for MPI2_VERSION_02_00.
- *                      Fixed the size of the FunctionDependent5 field in the
- *                      MPI2_DEFAULT_REPLY structure.
- *  12-18-07  02.00.05  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Removed the MPI-defined Fault Codes and extended the
- *                      product specific codes up to 0xEFFF.
- *                      Added a sixth key value for the WriteSequence register
- *                      and changed the flush value to 0x0.
- *                      Added message function codes for Diagnostic Buffer Post
- *                      and Diagnsotic Release.
- *                      New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
- *                      Moved MPI2_VERSION_UNION from mpi2_ioc.h.
- *  02-29-08  02.00.06  Bumped MPI2_HEADER_VERSION_UNIT.
- *  03-03-08  02.00.07  Bumped MPI2_HEADER_VERSION_UNIT.
- *  05-21-08  02.00.08  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Added #defines for marking a reply descriptor as unused.
- *  06-27-08  02.00.09  Bumped MPI2_HEADER_VERSION_UNIT.
- *  10-02-08  02.00.10  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Moved LUN field defines from mpi2_init.h.
- *  01-19-09  02.00.11  Bumped MPI2_HEADER_VERSION_UNIT.
- *  05-06-09  02.00.12  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      In all request and reply descriptors, replaced VF_ID
- *                      field with MSIxIndex field.
- *                      Removed DevHandle field from
- *                      MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
- *                      bytes reserved.
- *                      Added RAID Accelerator functionality.
- *  07-30-09  02.00.13  Bumped MPI2_HEADER_VERSION_UNIT.
- *  10-28-09  02.00.14  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Added MSI-x index mask and shift for Reply Post Host
- *                      Index register.
- *                      Added function code for Host Based Discovery Action.
- *  02-10-10  02.00.15  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
- *                      Added defines for product-specific range of message
- *                      function codes, 0xF0 to 0xFF.
- *  05-12-10  02.00.16  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Added alternative defines for the SGE Direction bit.
- *  08-11-10  02.00.17  Bumped MPI2_HEADER_VERSION_UNIT.
- *  11-10-10  02.00.18  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
- *  02-23-11  02.00.19  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
- *  03-09-11  02.00.20  Bumped MPI2_HEADER_VERSION_UNIT.
- *  05-25-11  02.00.21  Bumped MPI2_HEADER_VERSION_UNIT.
- *  08-24-11  02.00.22  Bumped MPI2_HEADER_VERSION_UNIT.
- *  11-18-11  02.00.23  Bumped MPI2_HEADER_VERSION_UNIT.
- *  02-06-12  02.00.24  Bumped MPI2_HEADER_VERSION_UNIT.
- *  03-29-12  02.00.25  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Added Hard Reset delay timings.
- *  07-10-12  02.00.26  Bumped MPI2_HEADER_VERSION_UNIT.
- *  07-26-12  02.00.27  Bumped MPI2_HEADER_VERSION_UNIT.
- *  11-27-12  02.00.28  Bumped MPI2_HEADER_VERSION_UNIT.
- *  12-20-12  02.00.29  Bumped MPI2_HEADER_VERSION_UNIT.
- *			Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
- *  04-09-13  02.00.30  Bumped MPI2_HEADER_VERSION_UNIT.
- *  04-17-13  02.00.31  Bumped MPI2_HEADER_VERSION_UNIT.
- *  08-19-13  02.00.32  Bumped MPI2_HEADER_VERSION_UNIT.
- *  12-05-13  02.00.33  Bumped MPI2_HEADER_VERSION_UNIT.
- *  01-08-14  02.00.34  Bumped MPI2_HEADER_VERSION_UNIT.
- *  06-13-14  02.00.35  Bumped MPI2_HEADER_VERSION_UNIT.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_H
-#define MPI2_H
-
-
-/*****************************************************************************
-*
-*        MPI Version Definitions
-*
-*****************************************************************************/
-
-#define MPI2_VERSION_MAJOR                  (0x02)
-#define MPI2_VERSION_MINOR                  (0x00)
-#define MPI2_VERSION_MAJOR_MASK             (0xFF00)
-#define MPI2_VERSION_MAJOR_SHIFT            (8)
-#define MPI2_VERSION_MINOR_MASK             (0x00FF)
-#define MPI2_VERSION_MINOR_SHIFT            (0)
-#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) |   \
-                                      MPI2_VERSION_MINOR)
-
-#define MPI2_VERSION_02_00                  (0x0200)
-
-/* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT            (0x23)
-#define MPI2_HEADER_VERSION_DEV             (0x00)
-#define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
-#define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
-#define MPI2_HEADER_VERSION_DEV_MASK        (0x00FF)
-#define MPI2_HEADER_VERSION_DEV_SHIFT       (0)
-#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | MPI2_HEADER_VERSION_DEV)
-
-
-/*****************************************************************************
-*
-*        IOC State Definitions
-*
-*****************************************************************************/
-
-#define MPI2_IOC_STATE_RESET               (0x00000000)
-#define MPI2_IOC_STATE_READY               (0x10000000)
-#define MPI2_IOC_STATE_OPERATIONAL         (0x20000000)
-#define MPI2_IOC_STATE_FAULT               (0x40000000)
-
-#define MPI2_IOC_STATE_MASK                (0xF0000000)
-#define MPI2_IOC_STATE_SHIFT               (28)
-
-/* Fault state range for prodcut specific codes */
-#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN                 (0x0000)
-#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX                 (0xEFFF)
-
-
-/*****************************************************************************
-*
-*        System Interface Register Definitions
-*
-*****************************************************************************/
-
-typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS
-{
-    U32         Doorbell;                   /* 0x00 */
-    U32         WriteSequence;              /* 0x04 */
-    U32         HostDiagnostic;             /* 0x08 */
-    U32         Reserved1;                  /* 0x0C */
-    U32         DiagRWData;                 /* 0x10 */
-    U32         DiagRWAddressLow;           /* 0x14 */
-    U32         DiagRWAddressHigh;          /* 0x18 */
-    U32         Reserved2[5];               /* 0x1C */
-    U32         HostInterruptStatus;        /* 0x30 */
-    U32         HostInterruptMask;          /* 0x34 */
-    U32         DCRData;                    /* 0x38 */
-    U32         DCRAddress;                 /* 0x3C */
-    U32         Reserved3[2];               /* 0x40 */
-    U32         ReplyFreeHostIndex;         /* 0x48 */
-    U32         Reserved4[8];               /* 0x4C */
-    U32         ReplyPostHostIndex;         /* 0x6C */
-    U32         Reserved5;                  /* 0x70 */
-    U32         HCBSize;                    /* 0x74 */
-    U32         HCBAddressLow;              /* 0x78 */
-    U32         HCBAddressHigh;             /* 0x7C */
-    U32         Reserved6[16];              /* 0x80 */
-    U32         RequestDescriptorPostLow;   /* 0xC0 */
-    U32         RequestDescriptorPostHigh;  /* 0xC4 */
-    U32         Reserved7[14];              /* 0xC8 */
-} MPI2_SYSTEM_INTERFACE_REGS, MPI2_POINTER PTR_MPI2_SYSTEM_INTERFACE_REGS,
-  Mpi2SystemInterfaceRegs_t, MPI2_POINTER pMpi2SystemInterfaceRegs_t;
-
-/*
- * Defines for working with the Doorbell register.
- */
-#define MPI2_DOORBELL_OFFSET                    (0x00000000)
-
-/* IOC --> System values */
-#define MPI2_DOORBELL_USED                      (0x08000000)
-#define MPI2_DOORBELL_WHO_INIT_MASK             (0x07000000)
-#define MPI2_DOORBELL_WHO_INIT_SHIFT            (24)
-#define MPI2_DOORBELL_FAULT_CODE_MASK           (0x0000FFFF)
-#define MPI2_DOORBELL_DATA_MASK                 (0x0000FFFF)
-
-/* System --> IOC values */
-#define MPI2_DOORBELL_FUNCTION_MASK             (0xFF000000)
-#define MPI2_DOORBELL_FUNCTION_SHIFT            (24)
-#define MPI2_DOORBELL_ADD_DWORDS_MASK           (0x00FF0000)
-#define MPI2_DOORBELL_ADD_DWORDS_SHIFT          (16)
-
-
-/*
- * Defines for the WriteSequence register
- */
-#define MPI2_WRITE_SEQUENCE_OFFSET              (0x00000004)
-#define MPI2_WRSEQ_KEY_VALUE_MASK               (0x0000000F)
-#define MPI2_WRSEQ_FLUSH_KEY_VALUE              (0x0)
-#define MPI2_WRSEQ_1ST_KEY_VALUE                (0xF)
-#define MPI2_WRSEQ_2ND_KEY_VALUE                (0x4)
-#define MPI2_WRSEQ_3RD_KEY_VALUE                (0xB)
-#define MPI2_WRSEQ_4TH_KEY_VALUE                (0x2)
-#define MPI2_WRSEQ_5TH_KEY_VALUE                (0x7)
-#define MPI2_WRSEQ_6TH_KEY_VALUE                (0xD)
-
-/*
- * Defines for the HostDiagnostic register
- */
-#define MPI2_HOST_DIAGNOSTIC_OFFSET             (0x00000008)
-
-#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK       (0x00001800)
-#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT    (0x00000000)
-#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW       (0x00000800)
-
-#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG           (0x00000400)
-#define MPI2_DIAG_FORCE_HCB_ON_RESET            (0x00000200)
-#define MPI2_DIAG_HCB_MODE                      (0x00000100)
-#define MPI2_DIAG_DIAG_WRITE_ENABLE             (0x00000080)
-#define MPI2_DIAG_FLASH_BAD_SIG                 (0x00000040)
-#define MPI2_DIAG_RESET_HISTORY                 (0x00000020)
-#define MPI2_DIAG_DIAG_RW_ENABLE                (0x00000010)
-#define MPI2_DIAG_RESET_ADAPTER                 (0x00000004)
-#define MPI2_DIAG_HOLD_IOC_RESET                (0x00000002)
-
-/*
- * Offsets for DiagRWData and address
- */
-#define MPI2_DIAG_RW_DATA_OFFSET                (0x00000010)
-#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET         (0x00000014)
-#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET        (0x00000018)
-
-/*
- * Defines for the HostInterruptStatus register
- */
-#define MPI2_HOST_INTERRUPT_STATUS_OFFSET       (0x00000030)
-#define MPI2_HIS_SYS2IOC_DB_STATUS              (0x80000000)
-#define MPI2_HIS_IOP_DOORBELL_STATUS            MPI2_HIS_SYS2IOC_DB_STATUS
-#define MPI2_HIS_RESET_IRQ_STATUS               (0x40000000)
-#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT     (0x00000008)
-#define MPI2_HIS_IOC2SYS_DB_STATUS              (0x00000001)
-#define MPI2_HIS_DOORBELL_INTERRUPT             MPI2_HIS_IOC2SYS_DB_STATUS
-
-/*
- * Defines for the HostInterruptMask register
- */
-#define MPI2_HOST_INTERRUPT_MASK_OFFSET         (0x00000034)
-#define MPI2_HIM_RESET_IRQ_MASK                 (0x40000000)
-#define MPI2_HIM_REPLY_INT_MASK                 (0x00000008)
-#define MPI2_HIM_RIM                            MPI2_HIM_REPLY_INT_MASK
-#define MPI2_HIM_IOC2SYS_DB_MASK                (0x00000001)
-#define MPI2_HIM_DIM                            MPI2_HIM_IOC2SYS_DB_MASK
-
-/*
- * Offsets for DCRData and address
- */
-#define MPI2_DCR_DATA_OFFSET                    (0x00000038)
-#define MPI2_DCR_ADDRESS_OFFSET                 (0x0000003C)
-
-/*
- * Offset for the Reply Free Queue
- */
-#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET       (0x00000048)
-
-/*
- * Defines for the Reply Descriptor Post Queue
- */
-#define MPI2_REPLY_POST_HOST_INDEX_OFFSET       (0x0000006C)
-#define MPI2_REPLY_POST_HOST_INDEX_MASK         (0x00FFFFFF)
-#define MPI2_RPHI_MSIX_INDEX_MASK               (0xFF000000)
-#define MPI2_RPHI_MSIX_INDEX_SHIFT              (24)
-#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET  (0x0000030C) /* MPI v2.5 only */
-
-/*
- * Defines for the HCBSize and address
- */
-#define MPI2_HCB_SIZE_OFFSET                    (0x00000074)
-#define MPI2_HCB_SIZE_SIZE_MASK                 (0xFFFFF000)
-#define MPI2_HCB_SIZE_HCB_ENABLE                (0x00000001)
-
-#define MPI2_HCB_ADDRESS_LOW_OFFSET             (0x00000078)
-#define MPI2_HCB_ADDRESS_HIGH_OFFSET            (0x0000007C)
-
-/*
- * Offsets for the Request Queue
- */
-#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET     (0x000000C0)
-#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET    (0x000000C4)
-
-
-/* Hard Reset delay timings */
-#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC     (50000)
-#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC    (255000)
-#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC    (256000)
-
-/*****************************************************************************
-*
-*        Message Descriptors
-*
-*****************************************************************************/
-
-/* Request Descriptors */
-
-/* Default Request Descriptor */
-typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR
-{
-    U8              RequestFlags;               /* 0x00 */
-    U8              MSIxIndex;                  /* 0x01 */
-    U16             SMID;                       /* 0x02 */
-    U16             LMID;                       /* 0x04 */
-    U16             DescriptorTypeDependent;    /* 0x06 */
-} MPI2_DEFAULT_REQUEST_DESCRIPTOR,
-  MPI2_POINTER PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR,
-  Mpi2DefaultRequestDescriptor_t, MPI2_POINTER pMpi2DefaultRequestDescriptor_t;
-
-/* defines for the RequestFlags field */
-#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK               (0x0E)
-#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO                 (0x00)
-#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET             (0x02)
-#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY           (0x06)
-#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE            (0x08)
-#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR        (0x0A)
-
-#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
-
-
-/* High Priority Request Descriptor */
-typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR
-{
-    U8              RequestFlags;               /* 0x00 */
-    U8              MSIxIndex;                  /* 0x01 */
-    U16             SMID;                       /* 0x02 */
-    U16             LMID;                       /* 0x04 */
-    U16             Reserved1;                  /* 0x06 */
-} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
-  MPI2_POINTER PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
-  Mpi2HighPriorityRequestDescriptor_t,
-  MPI2_POINTER pMpi2HighPriorityRequestDescriptor_t;
-
-
-/* SCSI IO Request Descriptor */
-typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR
-{
-    U8              RequestFlags;               /* 0x00 */
-    U8              MSIxIndex;                  /* 0x01 */
-    U16             SMID;                       /* 0x02 */
-    U16             LMID;                       /* 0x04 */
-    U16             DevHandle;                  /* 0x06 */
-} MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
-  MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
-  Mpi2SCSIIORequestDescriptor_t, MPI2_POINTER pMpi2SCSIIORequestDescriptor_t;
-
-
-/* SCSI Target Request Descriptor */
-typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR
-{
-    U8              RequestFlags;               /* 0x00 */
-    U8              MSIxIndex;                  /* 0x01 */
-    U16             SMID;                       /* 0x02 */
-    U16             LMID;                       /* 0x04 */
-    U16             IoIndex;                    /* 0x06 */
-} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
-  MPI2_POINTER PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
-  Mpi2SCSITargetRequestDescriptor_t,
-  MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t;
-
-
-/* RAID Accelerator Request Descriptor */
-typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
-    U8              RequestFlags;               /* 0x00 */
-    U8              MSIxIndex;                  /* 0x01 */
-    U16             SMID;                       /* 0x02 */
-    U16             LMID;                       /* 0x04 */
-    U16             Reserved;                   /* 0x06 */
-} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
-  MPI2_POINTER PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
-  Mpi2RAIDAcceleratorRequestDescriptor_t,
-  MPI2_POINTER pMpi2RAIDAcceleratorRequestDescriptor_t;
-
-
-/* union of Request Descriptors */
-typedef union _MPI2_REQUEST_DESCRIPTOR_UNION
-{
-    MPI2_DEFAULT_REQUEST_DESCRIPTOR             Default;
-    MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR       HighPriority;
-    MPI2_SCSI_IO_REQUEST_DESCRIPTOR             SCSIIO;
-    MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR         SCSITarget;
-    MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR          RAIDAccelerator;
-    U64                                         Words;
-} MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
-  Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t;
-
-
-/* Reply Descriptors */
-
-/* Default Reply Descriptor */
-typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR
-{
-    U8              ReplyFlags;                 /* 0x00 */
-    U8              MSIxIndex;                  /* 0x01 */
-    U16             DescriptorTypeDependent1;   /* 0x02 */
-    U32             DescriptorTypeDependent2;   /* 0x04 */
-} MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
-  Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t;
-
-/* defines for the ReplyFlags field */
-#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK                   (0x0F)
-#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS             (0x00)
-#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY               (0x01)
-#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS        (0x02)
-#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER       (0x03)
-#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS    (0x05)
-#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED                      (0x0F)
-
-/* values for marking a reply descriptor as unused */
-#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK             (0xFFFFFFFF)
-#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK             (0xFFFFFFFF)
-
-/* Address Reply Descriptor */
-typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR
-{
-    U8              ReplyFlags;                 /* 0x00 */
-    U8              MSIxIndex;                  /* 0x01 */
-    U16             SMID;                       /* 0x02 */
-    U32             ReplyFrameAddress;          /* 0x04 */
-} MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
-  Mpi2AddressReplyDescriptor_t, MPI2_POINTER pMpi2AddressReplyDescriptor_t;
-
-#define MPI2_ADDRESS_REPLY_SMID_INVALID                 (0x00)
-
-
-/* SCSI IO Success Reply Descriptor */
-typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
-{
-    U8              ReplyFlags;                 /* 0x00 */
-    U8              MSIxIndex;                  /* 0x01 */
-    U16             SMID;                       /* 0x02 */
-    U16             TaskTag;                    /* 0x04 */
-    U16             Reserved1;                  /* 0x06 */
-} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
-  MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
-  Mpi2SCSIIOSuccessReplyDescriptor_t,
-  MPI2_POINTER pMpi2SCSIIOSuccessReplyDescriptor_t;
-
-
-/* TargetAssist Success Reply Descriptor */
-typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR
-{
-    U8              ReplyFlags;                 /* 0x00 */
-    U8              MSIxIndex;                  /* 0x01 */
-    U16             SMID;                       /* 0x02 */
-    U8              SequenceNumber;             /* 0x04 */
-    U8              Reserved1;                  /* 0x05 */
-    U16             IoIndex;                    /* 0x06 */
-} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
-  MPI2_POINTER PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
-  Mpi2TargetAssistSuccessReplyDescriptor_t,
-  MPI2_POINTER pMpi2TargetAssistSuccessReplyDescriptor_t;
-
-
-/* Target Command Buffer Reply Descriptor */
-typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR
-{
-    U8              ReplyFlags;                 /* 0x00 */
-    U8              MSIxIndex;                  /* 0x01 */
-    U8              VP_ID;                      /* 0x02 */
-    U8              Flags;                      /* 0x03 */
-    U16             InitiatorDevHandle;         /* 0x04 */
-    U16             IoIndex;                    /* 0x06 */
-} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
-  MPI2_POINTER PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
-  Mpi2TargetCommandBufferReplyDescriptor_t,
-  MPI2_POINTER pMpi2TargetCommandBufferReplyDescriptor_t;
-
-/* defines for Flags field */
-#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK     (0x3F)
-
-
-/* RAID Accelerator Success Reply Descriptor */
-typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
-    U8              ReplyFlags;                 /* 0x00 */
-    U8              MSIxIndex;                  /* 0x01 */
-    U16             SMID;                       /* 0x02 */
-    U32             Reserved;                   /* 0x04 */
-} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
-  MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
-  Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
-  MPI2_POINTER pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
-
-
-/* union of Reply Descriptors */
-typedef union _MPI2_REPLY_DESCRIPTORS_UNION
-{
-    MPI2_DEFAULT_REPLY_DESCRIPTOR                   Default;
-    MPI2_ADDRESS_REPLY_DESCRIPTOR                   AddressReply;
-    MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR           SCSIIOSuccess;
-    MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR      TargetAssistSuccess;
-    MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR     TargetCommandBuffer;
-    MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR  RAIDAcceleratorSuccess;
-    U64                                             Words;
-} MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION,
-Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t;
-
-
-
-/*****************************************************************************
-*
-*        Message Functions
-*
-*****************************************************************************/
-
-#define MPI2_FUNCTION_SCSI_IO_REQUEST               (0x00) /* SCSI IO */
-#define MPI2_FUNCTION_SCSI_TASK_MGMT                (0x01) /* SCSI Task Management */
-#define MPI2_FUNCTION_IOC_INIT                      (0x02) /* IOC Init */
-#define MPI2_FUNCTION_IOC_FACTS                     (0x03) /* IOC Facts */
-#define MPI2_FUNCTION_CONFIG                        (0x04) /* Configuration */
-#define MPI2_FUNCTION_PORT_FACTS                    (0x05) /* Port Facts */
-#define MPI2_FUNCTION_PORT_ENABLE                   (0x06) /* Port Enable */
-#define MPI2_FUNCTION_EVENT_NOTIFICATION            (0x07) /* Event Notification */
-#define MPI2_FUNCTION_EVENT_ACK                     (0x08) /* Event Acknowledge */
-#define MPI2_FUNCTION_FW_DOWNLOAD                   (0x09) /* FW Download */
-#define MPI2_FUNCTION_TARGET_ASSIST                 (0x0B) /* Target Assist */
-#define MPI2_FUNCTION_TARGET_STATUS_SEND            (0x0C) /* Target Status Send */
-#define MPI2_FUNCTION_TARGET_MODE_ABORT             (0x0D) /* Target Mode Abort */
-#define MPI2_FUNCTION_FW_UPLOAD                     (0x12) /* FW Upload */
-#define MPI2_FUNCTION_RAID_ACTION                   (0x15) /* RAID Action */
-#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH      (0x16) /* SCSI IO RAID Passthrough */
-#define MPI2_FUNCTION_TOOLBOX                       (0x17) /* Toolbox */
-#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR      (0x18) /* SCSI Enclosure Processor */
-#define MPI2_FUNCTION_SMP_PASSTHROUGH               (0x1A) /* SMP Passthrough */
-#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL           (0x1B) /* SAS IO Unit Control */
-#define MPI2_FUNCTION_SATA_PASSTHROUGH              (0x1C) /* SATA Passthrough */
-#define MPI2_FUNCTION_DIAG_BUFFER_POST              (0x1D) /* Diagnostic Buffer Post */
-#define MPI2_FUNCTION_DIAG_RELEASE                  (0x1E) /* Diagnostic Release */
-#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST      (0x24) /* Target Command Buffer Post Base */
-#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST      (0x25) /* Target Command Buffer Post List */
-#define MPI2_FUNCTION_RAID_ACCELERATOR              (0x2C) /* RAID Accelerator*/
-/* Host Based Discovery Action */
-#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION   (0x2F)
-/* Power Management Control */
-#define MPI2_FUNCTION_PWR_MGMT_CONTROL              (0x30)
-/* Send Host Message */
-#define MPI2_FUNCTION_SEND_HOST_MESSAGE             (0x31)
-/* beginning of product-specific range */
-#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC          (0xF0)
-/* end of product-specific range */
-#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC          (0xFF)
-
-
-
-
-/* Doorbell functions */
-#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET        (0x40)
-#define MPI2_FUNCTION_HANDSHAKE                     (0x42)
-
-
-/*****************************************************************************
-*
-*        IOC Status Values
-*
-*****************************************************************************/
-
-/* mask for IOCStatus status value */
-#define MPI2_IOCSTATUS_MASK                     (0x7FFF)
-
-/****************************************************************************
-*  Common IOCStatus values for all replies
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_SUCCESS                      (0x0000)
-#define MPI2_IOCSTATUS_INVALID_FUNCTION             (0x0001)
-#define MPI2_IOCSTATUS_BUSY                         (0x0002)
-#define MPI2_IOCSTATUS_INVALID_SGL                  (0x0003)
-#define MPI2_IOCSTATUS_INTERNAL_ERROR               (0x0004)
-#define MPI2_IOCSTATUS_INVALID_VPID                 (0x0005)
-#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES       (0x0006)
-#define MPI2_IOCSTATUS_INVALID_FIELD                (0x0007)
-#define MPI2_IOCSTATUS_INVALID_STATE                (0x0008)
-#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED       (0x0009)
-
-/****************************************************************************
-*  Config IOCStatus values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION        (0x0020)
-#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE          (0x0021)
-#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE          (0x0022)
-#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA          (0x0023)
-#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS           (0x0024)
-#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT           (0x0025)
-
-/****************************************************************************
-*  SCSI IO Reply
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR         (0x0040)
-#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE       (0x0042)
-#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE        (0x0043)
-#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN            (0x0044)
-#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN           (0x0045)
-#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR           (0x0046)
-#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR          (0x0047)
-#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED         (0x0048)
-#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH       (0x0049)
-#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED        (0x004A)
-#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED          (0x004B)
-#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED          (0x004C)
-
-/****************************************************************************
-*  For use by SCSI Initiator and SCSI Target end-to-end data protection
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR             (0x004D)
-#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR           (0x004E)
-#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR           (0x004F)
-
-/****************************************************************************
-*  SCSI Target values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX      (0x0062)
-#define MPI2_IOCSTATUS_TARGET_ABORTED               (0x0063)
-#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE     (0x0064)
-#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION         (0x0065)
-#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH   (0x006A)
-#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR     (0x006D)
-#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA   (0x006E)
-#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT          (0x006F)
-#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT       (0x0070)
-#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED          (0x0071)
-
-/****************************************************************************
-*  Serial Attached SCSI values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED       (0x0090)
-#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN         (0x0091)
-
-/****************************************************************************
-*  Diagnostic Buffer Post / Diagnostic Release values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED          (0x00A0)
-
-/****************************************************************************
-*  RAID Accelerator values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR             (0x00B0)
-
-/****************************************************************************
-*  IOCStatus flag to indicate that log info is available
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE      (0x8000)
-
-/****************************************************************************
-*  IOCLogInfo Types
-****************************************************************************/
-
-#define MPI2_IOCLOGINFO_TYPE_MASK               (0xF0000000)
-#define MPI2_IOCLOGINFO_TYPE_SHIFT              (28)
-#define MPI2_IOCLOGINFO_TYPE_NONE               (0x0)
-#define MPI2_IOCLOGINFO_TYPE_SCSI               (0x1)
-#define MPI2_IOCLOGINFO_TYPE_FC                 (0x2)
-#define MPI2_IOCLOGINFO_TYPE_SAS                (0x3)
-#define MPI2_IOCLOGINFO_TYPE_ISCSI              (0x4)
-#define MPI2_IOCLOGINFO_LOG_DATA_MASK           (0x0FFFFFFF)
-
-
-/*****************************************************************************
-*
-*        Standard Message Structures
-*
-*****************************************************************************/
-
-/****************************************************************************
-* Request Message Header for all request messages
-****************************************************************************/
-
-typedef struct _MPI2_REQUEST_HEADER
-{
-    U16             FunctionDependent1;         /* 0x00 */
-    U8              ChainOffset;                /* 0x02 */
-    U8              Function;                   /* 0x03 */
-    U16             FunctionDependent2;         /* 0x04 */
-    U8              FunctionDependent3;         /* 0x06 */
-    U8              MsgFlags;                   /* 0x07 */
-    U8              VP_ID;                      /* 0x08 */
-    U8              VF_ID;                      /* 0x09 */
-    U16             Reserved1;                  /* 0x0A */
-} MPI2_REQUEST_HEADER, MPI2_POINTER PTR_MPI2_REQUEST_HEADER,
-  MPI2RequestHeader_t, MPI2_POINTER pMPI2RequestHeader_t;
-
-
-/****************************************************************************
-*  Default Reply
-****************************************************************************/
-
-typedef struct _MPI2_DEFAULT_REPLY
-{
-    U16             FunctionDependent1;         /* 0x00 */
-    U8              MsgLength;                  /* 0x02 */
-    U8              Function;                   /* 0x03 */
-    U16             FunctionDependent2;         /* 0x04 */
-    U8              FunctionDependent3;         /* 0x06 */
-    U8              MsgFlags;                   /* 0x07 */
-    U8              VP_ID;                      /* 0x08 */
-    U8              VF_ID;                      /* 0x09 */
-    U16             Reserved1;                  /* 0x0A */
-    U16             FunctionDependent5;         /* 0x0C */
-    U16             IOCStatus;                  /* 0x0E */
-    U32             IOCLogInfo;                 /* 0x10 */
-} MPI2_DEFAULT_REPLY, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY,
-  MPI2DefaultReply_t, MPI2_POINTER pMPI2DefaultReply_t;
-
-
-/* common version structure/union used in messages and configuration pages */
-
-typedef struct _MPI2_VERSION_STRUCT
-{
-    U8                      Dev;                        /* 0x00 */
-    U8                      Unit;                       /* 0x01 */
-    U8                      Minor;                      /* 0x02 */
-    U8                      Major;                      /* 0x03 */
-} MPI2_VERSION_STRUCT;
-
-typedef union _MPI2_VERSION_UNION
-{
-    MPI2_VERSION_STRUCT     Struct;
-    U32                     Word;
-} MPI2_VERSION_UNION;
-
-
-/* LUN field defines, common to many structures */
-#define MPI2_LUN_FIRST_LEVEL_ADDRESSING             (0x0000FFFF)
-#define MPI2_LUN_SECOND_LEVEL_ADDRESSING            (0xFFFF0000)
-#define MPI2_LUN_THIRD_LEVEL_ADDRESSING             (0x0000FFFF)
-#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING            (0xFFFF0000)
-#define MPI2_LUN_LEVEL_1_WORD                       (0xFF00)
-#define MPI2_LUN_LEVEL_1_DWORD                      (0x0000FF00)
-
-
-/*****************************************************************************
-*
-*        Fusion-MPT MPI Scatter Gather Elements
-*
-*****************************************************************************/
-
-/****************************************************************************
-*  MPI Simple Element structures
-****************************************************************************/
-
-typedef struct _MPI2_SGE_SIMPLE32
-{
-    U32                     FlagsLength;
-    U32                     Address;
-} MPI2_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_SGE_SIMPLE32,
-  Mpi2SGESimple32_t, MPI2_POINTER pMpi2SGESimple32_t;
-
-typedef struct _MPI2_SGE_SIMPLE64
-{
-    U32                     FlagsLength;
-    U64                     Address;
-} MPI2_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_SGE_SIMPLE64,
-  Mpi2SGESimple64_t, MPI2_POINTER pMpi2SGESimple64_t;
-
-typedef struct _MPI2_SGE_SIMPLE_UNION
-{
-    U32                     FlagsLength;
-    union
-    {
-        U32                 Address32;
-        U64                 Address64;
-    } u;
-} MPI2_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_SIMPLE_UNION,
-  Mpi2SGESimpleUnion_t, MPI2_POINTER pMpi2SGESimpleUnion_t;
-
-
-/****************************************************************************
-*  MPI Chain Element structures
-****************************************************************************/
-
-typedef struct _MPI2_SGE_CHAIN32
-{
-    U16                     Length;
-    U8                      NextChainOffset;
-    U8                      Flags;
-    U32                     Address;
-} MPI2_SGE_CHAIN32, MPI2_POINTER PTR_MPI2_SGE_CHAIN32,
-  Mpi2SGEChain32_t, MPI2_POINTER pMpi2SGEChain32_t;
-
-typedef struct _MPI2_SGE_CHAIN64
-{
-    U16                     Length;
-    U8                      NextChainOffset;
-    U8                      Flags;
-    U64                     Address;
-} MPI2_SGE_CHAIN64, MPI2_POINTER PTR_MPI2_SGE_CHAIN64,
-  Mpi2SGEChain64_t, MPI2_POINTER pMpi2SGEChain64_t;
-
-typedef struct _MPI2_SGE_CHAIN_UNION
-{
-    U16                     Length;
-    U8                      NextChainOffset;
-    U8                      Flags;
-    union
-    {
-        U32                 Address32;
-        U64                 Address64;
-    } u;
-} MPI2_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_SGE_CHAIN_UNION,
-  Mpi2SGEChainUnion_t, MPI2_POINTER pMpi2SGEChainUnion_t;
-
-
-/****************************************************************************
-*  MPI Transaction Context Element structures
-****************************************************************************/
-
-typedef struct _MPI2_SGE_TRANSACTION32
-{
-    U8                      Reserved;
-    U8                      ContextSize;
-    U8                      DetailsLength;
-    U8                      Flags;
-    U32                     TransactionContext[1];
-    U32                     TransactionDetails[1];
-} MPI2_SGE_TRANSACTION32, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION32,
-  Mpi2SGETransaction32_t, MPI2_POINTER pMpi2SGETransaction32_t;
-
-typedef struct _MPI2_SGE_TRANSACTION64
-{
-    U8                      Reserved;
-    U8                      ContextSize;
-    U8                      DetailsLength;
-    U8                      Flags;
-    U32                     TransactionContext[2];
-    U32                     TransactionDetails[1];
-} MPI2_SGE_TRANSACTION64, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION64,
-  Mpi2SGETransaction64_t, MPI2_POINTER pMpi2SGETransaction64_t;
-
-typedef struct _MPI2_SGE_TRANSACTION96
-{
-    U8                      Reserved;
-    U8                      ContextSize;
-    U8                      DetailsLength;
-    U8                      Flags;
-    U32                     TransactionContext[3];
-    U32                     TransactionDetails[1];
-} MPI2_SGE_TRANSACTION96, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION96,
-  Mpi2SGETransaction96_t, MPI2_POINTER pMpi2SGETransaction96_t;
-
-typedef struct _MPI2_SGE_TRANSACTION128
-{
-    U8                      Reserved;
-    U8                      ContextSize;
-    U8                      DetailsLength;
-    U8                      Flags;
-    U32                     TransactionContext[4];
-    U32                     TransactionDetails[1];
-} MPI2_SGE_TRANSACTION128, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION128,
-  Mpi2SGETransaction_t128, MPI2_POINTER pMpi2SGETransaction_t128;
-
-typedef struct _MPI2_SGE_TRANSACTION_UNION
-{
-    U8                      Reserved;
-    U8                      ContextSize;
-    U8                      DetailsLength;
-    U8                      Flags;
-    union
-    {
-        U32                 TransactionContext32[1];
-        U32                 TransactionContext64[2];
-        U32                 TransactionContext96[3];
-        U32                 TransactionContext128[4];
-    } u;
-    U32                     TransactionDetails[1];
-} MPI2_SGE_TRANSACTION_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION_UNION,
-  Mpi2SGETransactionUnion_t, MPI2_POINTER pMpi2SGETransactionUnion_t;
-
-
-/****************************************************************************
-*  MPI SGE union for IO SGL's
-****************************************************************************/
-
-typedef struct _MPI2_MPI_SGE_IO_UNION
-{
-    union
-    {
-        MPI2_SGE_SIMPLE_UNION   Simple;
-        MPI2_SGE_CHAIN_UNION    Chain;
-    } u;
-} MPI2_MPI_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_IO_UNION,
-  Mpi2MpiSGEIOUnion_t, MPI2_POINTER pMpi2MpiSGEIOUnion_t;
-
-
-/****************************************************************************
-*  MPI SGE union for SGL's with Simple and Transaction elements
-****************************************************************************/
-
-typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION
-{
-    union
-    {
-        MPI2_SGE_SIMPLE_UNION       Simple;
-        MPI2_SGE_TRANSACTION_UNION  Transaction;
-    } u;
-} MPI2_SGE_TRANS_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANS_SIMPLE_UNION,
-  Mpi2SGETransSimpleUnion_t, MPI2_POINTER pMpi2SGETransSimpleUnion_t;
-
-
-/****************************************************************************
-*  All MPI SGE types union
-****************************************************************************/
-
-typedef struct _MPI2_MPI_SGE_UNION
-{
-    union
-    {
-        MPI2_SGE_SIMPLE_UNION       Simple;
-        MPI2_SGE_CHAIN_UNION        Chain;
-        MPI2_SGE_TRANSACTION_UNION  Transaction;
-    } u;
-} MPI2_MPI_SGE_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_UNION,
-  Mpi2MpiSgeUnion_t, MPI2_POINTER pMpi2MpiSgeUnion_t;
-
-
-/****************************************************************************
-*  MPI SGE field definition and masks
-****************************************************************************/
-
-/* Flags field bit definitions */
-
-#define MPI2_SGE_FLAGS_LAST_ELEMENT             (0x80)
-#define MPI2_SGE_FLAGS_END_OF_BUFFER            (0x40)
-#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK        (0x30)
-#define MPI2_SGE_FLAGS_LOCAL_ADDRESS            (0x08)
-#define MPI2_SGE_FLAGS_DIRECTION                (0x04)
-#define MPI2_SGE_FLAGS_ADDRESS_SIZE             (0x02)
-#define MPI2_SGE_FLAGS_END_OF_LIST              (0x01)
-
-#define MPI2_SGE_FLAGS_SHIFT                    (24)
-
-#define MPI2_SGE_LENGTH_MASK                    (0x00FFFFFF)
-#define MPI2_SGE_CHAIN_LENGTH_MASK              (0x0000FFFF)
-
-/* Element Type */
-
-#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT      (0x00)
-#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT           (0x10)
-#define MPI2_SGE_FLAGS_CHAIN_ELEMENT            (0x30)
-#define MPI2_SGE_FLAGS_ELEMENT_MASK             (0x30)
-
-/* Address location */
-
-#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS           (0x00)
-
-/* Direction */
-
-#define MPI2_SGE_FLAGS_IOC_TO_HOST              (0x00)
-#define MPI2_SGE_FLAGS_HOST_TO_IOC              (0x04)
-
-#define MPI2_SGE_FLAGS_DEST                     (MPI2_SGE_FLAGS_IOC_TO_HOST)
-#define MPI2_SGE_FLAGS_SOURCE                   (MPI2_SGE_FLAGS_HOST_TO_IOC)
-
-/* Address Size */
-
-#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING        (0x00)
-#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING        (0x02)
-
-/* Context Size */
-
-#define MPI2_SGE_FLAGS_32_BIT_CONTEXT           (0x00)
-#define MPI2_SGE_FLAGS_64_BIT_CONTEXT           (0x02)
-#define MPI2_SGE_FLAGS_96_BIT_CONTEXT           (0x04)
-#define MPI2_SGE_FLAGS_128_BIT_CONTEXT          (0x06)
-
-#define MPI2_SGE_CHAIN_OFFSET_MASK              (0x00FF0000)
-#define MPI2_SGE_CHAIN_OFFSET_SHIFT             (16)
-
-/****************************************************************************
-*  MPI SGE operation Macros
-****************************************************************************/
-
-/* SIMPLE FlagsLength manipulations... */
-#define MPI2_SGE_SET_FLAGS(f)          ((U32)(f) << MPI2_SGE_FLAGS_SHIFT)
-#define MPI2_SGE_GET_FLAGS(f)          (((f) & ~MPI2_SGE_LENGTH_MASK) >> MPI2_SGE_FLAGS_SHIFT)
-#define MPI2_SGE_LENGTH(f)             ((f) & MPI2_SGE_LENGTH_MASK)
-#define MPI2_SGE_CHAIN_LENGTH(f)       ((f) & MPI2_SGE_CHAIN_LENGTH_MASK)
-
-#define MPI2_SGE_SET_FLAGS_LENGTH(f,l) (MPI2_SGE_SET_FLAGS(f) | MPI2_SGE_LENGTH(l))
-
-#define MPI2_pSGE_GET_FLAGS(psg)            MPI2_SGE_GET_FLAGS((psg)->FlagsLength)
-#define MPI2_pSGE_GET_LENGTH(psg)           MPI2_SGE_LENGTH((psg)->FlagsLength)
-#define MPI2_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_SGE_SET_FLAGS_LENGTH(f,l)
-
-/* CAUTION - The following are READ-MODIFY-WRITE! */
-#define MPI2_pSGE_SET_FLAGS(psg,f)      (psg)->FlagsLength |= MPI2_SGE_SET_FLAGS(f)
-#define MPI2_pSGE_SET_LENGTH(psg,l)     (psg)->FlagsLength |= MPI2_SGE_LENGTH(l)
-
-#define MPI2_GET_CHAIN_OFFSET(x)    ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> MPI2_SGE_CHAIN_OFFSET_SHIFT)
-
-
-/*****************************************************************************
-*
-*        Fusion-MPT IEEE Scatter Gather Elements
-*
-*****************************************************************************/
-
-/****************************************************************************
-*  IEEE Simple Element structures
-****************************************************************************/
-
-typedef struct _MPI2_IEEE_SGE_SIMPLE32
-{
-    U32                     Address;
-    U32                     FlagsLength;
-} MPI2_IEEE_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE32,
-  Mpi2IeeeSgeSimple32_t, MPI2_POINTER pMpi2IeeeSgeSimple32_t;
-
-typedef struct _MPI2_IEEE_SGE_SIMPLE64
-{
-    U64                     Address;
-    U32                     Length;
-    U16                     Reserved1;
-    U8                      Reserved2;
-    U8                      Flags;
-} MPI2_IEEE_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE64,
-  Mpi2IeeeSgeSimple64_t, MPI2_POINTER pMpi2IeeeSgeSimple64_t;
-
-typedef union _MPI2_IEEE_SGE_SIMPLE_UNION
-{
-    MPI2_IEEE_SGE_SIMPLE32  Simple32;
-    MPI2_IEEE_SGE_SIMPLE64  Simple64;
-} MPI2_IEEE_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE_UNION,
-  Mpi2IeeeSgeSimpleUnion_t, MPI2_POINTER pMpi2IeeeSgeSimpleUnion_t;
-
-
-/****************************************************************************
-*  IEEE Chain Element structures
-****************************************************************************/
-
-typedef MPI2_IEEE_SGE_SIMPLE32  MPI2_IEEE_SGE_CHAIN32;
-
-typedef MPI2_IEEE_SGE_SIMPLE64  MPI2_IEEE_SGE_CHAIN64;
-
-typedef union _MPI2_IEEE_SGE_CHAIN_UNION
-{
-    MPI2_IEEE_SGE_CHAIN32   Chain32;
-    MPI2_IEEE_SGE_CHAIN64   Chain64;
-} MPI2_IEEE_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_CHAIN_UNION,
-  Mpi2IeeeSgeChainUnion_t, MPI2_POINTER pMpi2IeeeSgeChainUnion_t;
-
-
-/****************************************************************************
-*  All IEEE SGE types union
-****************************************************************************/
-
-typedef struct _MPI2_IEEE_SGE_UNION
-{
-    union
-    {
-        MPI2_IEEE_SGE_SIMPLE_UNION  Simple;
-        MPI2_IEEE_SGE_CHAIN_UNION   Chain;
-    } u;
-} MPI2_IEEE_SGE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_UNION,
-  Mpi2IeeeSgeUnion_t, MPI2_POINTER pMpi2IeeeSgeUnion_t;
-
-
-/****************************************************************************
-*  IEEE SGE field definitions and masks
-****************************************************************************/
-
-/* Flags field bit definitions */
-
-#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK   (0x80)
-
-#define MPI2_IEEE32_SGE_FLAGS_SHIFT             (24)
-
-#define MPI2_IEEE32_SGE_LENGTH_MASK             (0x00FFFFFF)
-
-/* Element Type */
-
-#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT      (0x00)
-#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT       (0x80)
-
-/* Data Location Address Space */
-
-#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK           (0x03)
-#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR         (0x00)
-						/* IEEE Simple Element only */
-#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR         (0x01)
-						/* IEEE Simple Element only */
-#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR         (0x02)
-#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR      (0x03)
-						/* IEEE Simple Element only */
-#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR   (0x03)
-						/* IEEE Chain Element only */
-#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR   \
-	(MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR) /* typo in name */
-
-/****************************************************************************
-*  IEEE SGE operation Macros
-****************************************************************************/
-
-/* SIMPLE FlagsLength manipulations... */
-#define MPI2_IEEE32_SGE_SET_FLAGS(f)     ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT)
-#define MPI2_IEEE32_SGE_GET_FLAGS(f)     (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) >> MPI2_IEEE32_SGE_FLAGS_SHIFT)
-#define MPI2_IEEE32_SGE_LENGTH(f)        ((f) & MPI2_IEEE32_SGE_LENGTH_MASK)
-
-#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l)      (MPI2_IEEE32_SGE_SET_FLAGS(f) | MPI2_IEEE32_SGE_LENGTH(l))
-
-#define MPI2_IEEE32_pSGE_GET_FLAGS(psg)             MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength)
-#define MPI2_IEEE32_pSGE_GET_LENGTH(psg)            MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength)
-#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg,f,l)  (psg)->FlagsLength = MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f,l)
-
-/* CAUTION - The following are READ-MODIFY-WRITE! */
-#define MPI2_IEEE32_pSGE_SET_FLAGS(psg,f)    (psg)->FlagsLength |= MPI2_IEEE32_SGE_SET_FLAGS(f)
-#define MPI2_IEEE32_pSGE_SET_LENGTH(psg,l)   (psg)->FlagsLength |= MPI2_IEEE32_SGE_LENGTH(l)
-
-
-
-
-/*****************************************************************************
-*
-*        Fusion-MPT MPI/IEEE Scatter Gather Unions
-*
-*****************************************************************************/
-
-typedef union _MPI2_SIMPLE_SGE_UNION
-{
-    MPI2_SGE_SIMPLE_UNION       MpiSimple;
-    MPI2_IEEE_SGE_SIMPLE_UNION  IeeeSimple;
-} MPI2_SIMPLE_SGE_UNION, MPI2_POINTER PTR_MPI2_SIMPLE_SGE_UNION,
-  Mpi2SimpleSgeUntion_t, MPI2_POINTER pMpi2SimpleSgeUntion_t;
-
-
-typedef union _MPI2_SGE_IO_UNION
-{
-    MPI2_SGE_SIMPLE_UNION       MpiSimple;
-    MPI2_SGE_CHAIN_UNION        MpiChain;
-    MPI2_IEEE_SGE_SIMPLE_UNION  IeeeSimple;
-    MPI2_IEEE_SGE_CHAIN_UNION   IeeeChain;
-} MPI2_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_SGE_IO_UNION,
-  Mpi2SGEIOUnion_t, MPI2_POINTER pMpi2SGEIOUnion_t;
-
-
-/****************************************************************************
-*
-*  Values for SGLFlags field, used in many request messages with an SGL
-*
-****************************************************************************/
-
-/* values for MPI SGL Data Location Address Space subfield */
-#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK            (0x0C)
-#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE          (0x00)
-#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE          (0x04)
-#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE          (0x08)
-#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE       (0x0C)
-/* values for SGL Type subfield */
-#define MPI2_SGLFLAGS_SGL_TYPE_MASK                 (0x03)
-#define MPI2_SGLFLAGS_SGL_TYPE_MPI                  (0x00)
-#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32               (0x01)
-#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64               (0x02)
-
-
-#endif
-
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
deleted file mode 100644
index ee8d2d695..000000000
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ /dev/null
@@ -1,3068 +0,0 @@
-/*
- *  Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- *           Name:  mpi2_cnfg.h
- *          Title:  MPI Configuration messages and pages
- *  Creation Date:  November 10, 2006
- *
- *    mpi2_cnfg.h Version:  02.00.29
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  06-04-07  02.00.01  Added defines for SAS IO Unit Page 2 PhyFlags.
- *                      Added Manufacturing Page 11.
- *                      Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
- *                      define.
- *  06-26-07  02.00.02  Adding generic structure for product-specific
- *                      Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
- *                      Rework of BIOS Page 2 configuration page.
- *                      Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
- *                      forms.
- *                      Added configuration pages IOC Page 8 and Driver
- *                      Persistent Mapping Page 0.
- *  08-31-07  02.00.03  Modified configuration pages dealing with Integrated
- *                      RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
- *                      RAID Physical Disk Pages 0 and 1, RAID Configuration
- *                      Page 0).
- *                      Added new value for AccessStatus field of SAS Device
- *                      Page 0 (_SATA_NEEDS_INITIALIZATION).
- *  10-31-07  02.00.04  Added missing SEPDevHandle field to
- *                      MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
- *  12-18-07  02.00.05  Modified IO Unit Page 0 to use 32-bit version fields for
- *                      NVDATA.
- *                      Modified IOC Page 7 to use masks and added field for
- *                      SASBroadcastPrimitiveMasks.
- *                      Added MPI2_CONFIG_PAGE_BIOS_4.
- *                      Added MPI2_CONFIG_PAGE_LOG_0.
- *  02-29-08  02.00.06  Modified various names to make them 32-character unique.
- *                      Added SAS Device IDs.
- *                      Updated Integrated RAID configuration pages including
- *                      Manufacturing Page 4, IOC Page 6, and RAID Configuration
- *                      Page 0.
- *  05-21-08  02.00.07  Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
- *                      Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
- *                      Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
- *                      Added missing MaxNumRoutedSasAddresses field to
- *                      MPI2_CONFIG_PAGE_EXPANDER_0.
- *                      Added SAS Port Page 0.
- *                      Modified structure layout for
- *                      MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
- *  06-27-08  02.00.08  Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
- *                      MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
- *  10-02-08  02.00.09  Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
- *                      to 0x000000FF.
- *                      Added two new values for the Physical Disk Coercion Size
- *                      bits in the Flags field of Manufacturing Page 4.
- *                      Added product-specific Manufacturing pages 16 to 31.
- *                      Modified Flags bits for controlling write cache on SATA
- *                      drives in IO Unit Page 1.
- *                      Added new bit to AdditionalControlFlags of SAS IO Unit
- *                      Page 1 to control Invalid Topology Correction.
- *                      Added additional defines for RAID Volume Page 0
- *                      VolumeStatusFlags field.
- *                      Modified meaning of RAID Volume Page 0 VolumeSettings
- *                      define for auto-configure of hot-swap drives.
- *                      Added SupportedPhysDisks field to RAID Volume Page 1 and
- *                      added related defines.
- *                      Added PhysDiskAttributes field (and related defines) to
- *                      RAID Physical Disk Page 0.
- *                      Added MPI2_SAS_PHYINFO_PHY_VACANT define.
- *                      Added three new DiscoveryStatus bits for SAS IO Unit
- *                      Page 0 and SAS Expander Page 0.
- *                      Removed multiplexing information from SAS IO Unit pages.
- *                      Added BootDeviceWaitTime field to SAS IO Unit Page 4.
- *                      Removed Zone Address Resolved bit from PhyInfo and from
- *                      Expander Page 0 Flags field.
- *                      Added two new AccessStatus values to SAS Device Page 0
- *                      for indicating routing problems. Added 3 reserved words
- *                      to this page.
- *  01-19-09  02.00.10  Fixed defines for GPIOVal field of IO Unit Page 3.
- *                      Inserted missing reserved field into structure for IOC
- *                      Page 6.
- *                      Added more pending task bits to RAID Volume Page 0
- *                      VolumeStatusFlags defines.
- *                      Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
- *                      Added a new DiscoveryStatus bit for SAS IO Unit Page 0
- *                      and SAS Expander Page 0 to flag a downstream initiator
- *                      when in simplified routing mode.
- *                      Removed SATA Init Failure defines for DiscoveryStatus
- *                      fields of SAS IO Unit Page 0 and SAS Expander Page 0.
- *                      Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
- *                      Added PortGroups, DmaGroup, and ControlGroup fields to
- *                      SAS Device Page 0.
- *  05-06-09  02.00.11  Added structures and defines for IO Unit Page 5 and IO
- *                      Unit Page 6.
- *                      Added expander reduced functionality data to SAS
- *                      Expander Page 0.
- *                      Added SAS PHY Page 2 and SAS PHY Page 3.
- *  07-30-09  02.00.12  Added IO Unit Page 7.
- *                      Added new device ids.
- *                      Added SAS IO Unit Page 5.
- *                      Added partial and slumber power management capable flags
- *                      to SAS Device Page 0 Flags field.
- *                      Added PhyInfo defines for power condition.
- *                      Added Ethernet configuration pages.
- *  10-28-09  02.00.13  Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
- *                      Added SAS PHY Page 4 structure and defines.
- *  02-10-10  02.00.14  Modified the comments for the configuration page
- *                      structures that contain an array of data. The host
- *                      should use the "count" field in the page data (e.g. the
- *                      NumPhys field) to determine the number of valid elements
- *                      in the array.
- *                      Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
- *                      Added PowerManagementCapabilities to IO Unit Page 7.
- *                      Added PortWidthModGroup field to
- *                      MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
- *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
- *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
- *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
- *  05-12-10  02.00.15  Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
- *                      define.
- *                      Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
- *                      Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
- *  08-11-10  02.00.16  Removed IO Unit Page 1 device path (multi-pathing)
- *                      defines.
- *  11-10-10  02.00.17  Added ReceptacleID field (replacing Reserved1) to
- *                      MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
- *                      the Pinout field.
- *                      Added BoardTemperature and BoardTemperatureUnits fields
- *                      to MPI2_CONFIG_PAGE_IO_UNIT_7.
- *                      Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
- *                      and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
- *  02-23-11  02.00.18  Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
- *                      Added IO Unit Page 8, IO Unit Page 9,
- *                      and IO Unit Page 10.
- *                      Added SASNotifyPrimitiveMasks field to
- *                      MPI2_CONFIG_PAGE_IOC_7.
- *  03-09-11  02.00.19  Fixed IO Unit Page 10 (to match the spec).
- *  05-25-11  02.00.20  Cleaned up a few comments.
- *  08-24-11  02.00.21  Marked the IO Unit Page 7 PowerManagementCapabilities
- *                      for PCIe link as obsolete.
- *                      Added SpinupFlags field containing a Disable Spin-up
- *                      bit to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of
- *                      SAS IO Unit Page 4.
- *  11-18-11  02.00.22  Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
- *                      Added UEFIVersion field to BIOS Page 1 and defined new
- *                      BiosOptions bits.
- *  11-27-12  02.00.23  Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
- *			Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
- *  12-20-12  02.00.24  Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
- *			obsolete for MPI v2.5 and later.
- *			Added some defines for 12G SAS speeds.
- *  04-09-13  02.00.25  Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
- *			Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
- *			match the specification.
- *  12-05-13  02.00.27  Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
- *			MPI2_CONFIG_PAGE_MAN_7.
- *			Added EnclosureLevel and ConnectorName fields to
- *			MPI2_CONFIG_PAGE_SAS_DEV_0.
- *			Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
- *			MPI2_CONFIG_PAGE_SAS_DEV_0.
- *			Added EnclosureLevel field to
- *			MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
- *			Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
- *			MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
- *  01-08-14  02.00.28  Added more defines for the BiosOptions field of
- *			MPI2_CONFIG_PAGE_BIOS_1.
- *  06-13-14  02.00.29  Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
- *			more defines for the BiosOptions field.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_CNFG_H
-#define MPI2_CNFG_H
-
-/*****************************************************************************
-*   Configuration Page Header and defines
-*****************************************************************************/
-
-/* Config Page Header */
-typedef struct _MPI2_CONFIG_PAGE_HEADER
-{
-    U8                 PageVersion;                /* 0x00 */
-    U8                 PageLength;                 /* 0x01 */
-    U8                 PageNumber;                 /* 0x02 */
-    U8                 PageType;                   /* 0x03 */
-} MPI2_CONFIG_PAGE_HEADER, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER,
-  Mpi2ConfigPageHeader_t, MPI2_POINTER pMpi2ConfigPageHeader_t;
-
-typedef union _MPI2_CONFIG_PAGE_HEADER_UNION
-{
-   MPI2_CONFIG_PAGE_HEADER  Struct;
-   U8                       Bytes[4];
-   U16                      Word16[2];
-   U32                      Word32;
-} MPI2_CONFIG_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
-  Mpi2ConfigPageHeaderUnion, MPI2_POINTER pMpi2ConfigPageHeaderUnion;
-
-/* Extended Config Page Header */
-typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER
-{
-    U8                  PageVersion;                /* 0x00 */
-    U8                  Reserved1;                  /* 0x01 */
-    U8                  PageNumber;                 /* 0x02 */
-    U8                  PageType;                   /* 0x03 */
-    U16                 ExtPageLength;              /* 0x04 */
-    U8                  ExtPageType;                /* 0x06 */
-    U8                  Reserved2;                  /* 0x07 */
-} MPI2_CONFIG_EXTENDED_PAGE_HEADER,
-  MPI2_POINTER PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
-  Mpi2ConfigExtendedPageHeader_t, MPI2_POINTER pMpi2ConfigExtendedPageHeader_t;
-
-typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION
-{
-   MPI2_CONFIG_PAGE_HEADER          Struct;
-   MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
-   U8                               Bytes[8];
-   U16                              Word16[4];
-   U32                              Word32[2];
-} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
-  Mpi2ConfigPageExtendedHeaderUnion, MPI2_POINTER pMpi2ConfigPageExtendedHeaderUnion;
-
-
-/* PageType field values */
-#define MPI2_CONFIG_PAGEATTR_READ_ONLY              (0x00)
-#define MPI2_CONFIG_PAGEATTR_CHANGEABLE             (0x10)
-#define MPI2_CONFIG_PAGEATTR_PERSISTENT             (0x20)
-#define MPI2_CONFIG_PAGEATTR_MASK                   (0xF0)
-
-#define MPI2_CONFIG_PAGETYPE_IO_UNIT                (0x00)
-#define MPI2_CONFIG_PAGETYPE_IOC                    (0x01)
-#define MPI2_CONFIG_PAGETYPE_BIOS                   (0x02)
-#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME            (0x08)
-#define MPI2_CONFIG_PAGETYPE_MANUFACTURING          (0x09)
-#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK          (0x0A)
-#define MPI2_CONFIG_PAGETYPE_EXTENDED               (0x0F)
-#define MPI2_CONFIG_PAGETYPE_MASK                   (0x0F)
-
-#define MPI2_CONFIG_TYPENUM_MASK                    (0x0FFF)
-
-
-/* ExtPageType field values */
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT         (0x10)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER        (0x11)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE          (0x12)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY             (0x13)
-#define MPI2_CONFIG_EXTPAGETYPE_LOG                 (0x14)
-#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE           (0x15)
-#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG         (0x16)
-#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING      (0x17)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT            (0x18)
-#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET            (0x19)
-#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING   (0x1A)
-
-
-/*****************************************************************************
-*   PageAddress defines
-*****************************************************************************/
-
-/* RAID Volume PageAddress format */
-#define MPI2_RAID_VOLUME_PGAD_FORM_MASK             (0xF0000000)
-#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE  (0x00000000)
-#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE           (0x10000000)
-
-#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK           (0x0000FFFF)
-
-
-/* RAID Physical Disk PageAddress format */
-#define MPI2_PHYSDISK_PGAD_FORM_MASK                    (0xF0000000)
-#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM    (0x00000000)
-#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM             (0x10000000)
-#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE               (0x20000000)
-
-#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK             (0x000000FF)
-#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK               (0x0000FFFF)
-
-
-/* SAS Expander PageAddress format */
-#define MPI2_SAS_EXPAND_PGAD_FORM_MASK              (0xF0000000)
-#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL     (0x00000000)
-#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM      (0x10000000)
-#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL              (0x20000000)
-
-#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK            (0x0000FFFF)
-#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK            (0x00FF0000)
-#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT           (16)
-
-
-/* SAS Device PageAddress format */
-#define MPI2_SAS_DEVICE_PGAD_FORM_MASK              (0xF0000000)
-#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE   (0x00000000)
-#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE            (0x20000000)
-
-#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK            (0x0000FFFF)
-
-
-/* SAS PHY PageAddress format */
-#define MPI2_SAS_PHY_PGAD_FORM_MASK                 (0xF0000000)
-#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER           (0x00000000)
-#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX        (0x10000000)
-
-#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK           (0x000000FF)
-#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK        (0x0000FFFF)
-
-
-/* SAS Port PageAddress format */
-#define MPI2_SASPORT_PGAD_FORM_MASK                 (0xF0000000)
-#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT        (0x00000000)
-#define MPI2_SASPORT_PGAD_FORM_PORT_NUM             (0x10000000)
-
-#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK           (0x00000FFF)
-
-
-/* SAS Enclosure PageAddress format */
-#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK              (0xF0000000)
-#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE   (0x00000000)
-#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE            (0x10000000)
-
-#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK            (0x0000FFFF)
-
-
-/* RAID Configuration PageAddress format */
-#define MPI2_RAID_PGAD_FORM_MASK                    (0xF0000000)
-#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM      (0x00000000)
-#define MPI2_RAID_PGAD_FORM_CONFIGNUM               (0x10000000)
-#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG           (0x20000000)
-
-#define MPI2_RAID_PGAD_CONFIGNUM_MASK               (0x000000FF)
-
-
-/* Driver Persistent Mapping PageAddress format */
-#define MPI2_DPM_PGAD_FORM_MASK                     (0xF0000000)
-#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE              (0x00000000)
-
-#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK              (0x0FFF0000)
-#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT             (16)
-#define MPI2_DPM_PGAD_START_ENTRY_MASK              (0x0000FFFF)
-
-
-/* Ethernet PageAddress format */
-#define MPI2_ETHERNET_PGAD_FORM_MASK                (0xF0000000)
-#define MPI2_ETHERNET_PGAD_FORM_IF_NUM              (0x00000000)
-
-#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK           (0x000000FF)
-
-
-
-/****************************************************************************
-*   Configuration messages
-****************************************************************************/
-
-/* Configuration Request Message */
-typedef struct _MPI2_CONFIG_REQUEST
-{
-    U8                      Action;                     /* 0x00 */
-    U8                      SGLFlags;                   /* 0x01 */
-    U8                      ChainOffset;                /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     ExtPageLength;              /* 0x04 */
-    U8                      ExtPageType;                /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved1;                  /* 0x0A */
-	U8                      Reserved2;                  /* 0x0C */
-	U8                      ProxyVF_ID;                 /* 0x0D */
-	U16                     Reserved4;                  /* 0x0E */
-    U32                     Reserved3;                  /* 0x10 */
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x14 */
-    U32                     PageAddress;                /* 0x18 */
-    MPI2_SGE_IO_UNION       PageBufferSGE;              /* 0x1C */
-} MPI2_CONFIG_REQUEST, MPI2_POINTER PTR_MPI2_CONFIG_REQUEST,
-  Mpi2ConfigRequest_t, MPI2_POINTER pMpi2ConfigRequest_t;
-
-/* values for the Action field */
-#define MPI2_CONFIG_ACTION_PAGE_HEADER              (0x00)
-#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT        (0x01)
-#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT       (0x02)
-#define MPI2_CONFIG_ACTION_PAGE_DEFAULT             (0x03)
-#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM         (0x04)
-#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT        (0x05)
-#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM          (0x06)
-#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE      (0x07)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* Config Reply Message */
-typedef struct _MPI2_CONFIG_REPLY
-{
-    U8                      Action;                     /* 0x00 */
-    U8                      SGLFlags;                   /* 0x01 */
-    U8                      MsgLength;                  /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     ExtPageLength;              /* 0x04 */
-    U8                      ExtPageType;                /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved1;                  /* 0x0A */
-    U16                     Reserved2;                  /* 0x0C */
-    U16                     IOCStatus;                  /* 0x0E */
-    U32                     IOCLogInfo;                 /* 0x10 */
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x14 */
-} MPI2_CONFIG_REPLY, MPI2_POINTER PTR_MPI2_CONFIG_REPLY,
-  Mpi2ConfigReply_t, MPI2_POINTER pMpi2ConfigReply_t;
-
-
-
-/*****************************************************************************
-*
-*               C o n f i g u r a t i o n    P a g e s
-*
-*****************************************************************************/
-
-/****************************************************************************
-*   Manufacturing Config pages
-****************************************************************************/
-
-#define MPI2_MFGPAGE_VENDORID_LSI                   (0x1000)
-
-/* SAS */
-#define MPI2_MFGPAGE_DEVID_SAS2004                  (0x0070)
-#define MPI2_MFGPAGE_DEVID_SAS2008                  (0x0072)
-#define MPI2_MFGPAGE_DEVID_SAS2108_1                (0x0074)
-#define MPI2_MFGPAGE_DEVID_SAS2108_2                (0x0076)
-#define MPI2_MFGPAGE_DEVID_SAS2108_3                (0x0077)
-#define MPI2_MFGPAGE_DEVID_SAS2116_1                (0x0064)
-#define MPI2_MFGPAGE_DEVID_SAS2116_2                (0x0065)
-
-#define MPI2_MFGPAGE_DEVID_SSS6200                  (0x007E)
-
-#define MPI2_MFGPAGE_DEVID_SAS2208_1                (0x0080)
-#define MPI2_MFGPAGE_DEVID_SAS2208_2                (0x0081)
-#define MPI2_MFGPAGE_DEVID_SAS2208_3                (0x0082)
-#define MPI2_MFGPAGE_DEVID_SAS2208_4                (0x0083)
-#define MPI2_MFGPAGE_DEVID_SAS2208_5                (0x0084)
-#define MPI2_MFGPAGE_DEVID_SAS2208_6                (0x0085)
-#define MPI2_MFGPAGE_DEVID_SAS2308_1                (0x0086)
-#define MPI2_MFGPAGE_DEVID_SAS2308_2                (0x0087)
-#define MPI2_MFGPAGE_DEVID_SAS2308_3                (0x006E)
-
-
-
-
-/* Manufacturing Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_0
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    U8                      ChipName[16];               /* 0x04 */
-    U8                      ChipRevision[8];            /* 0x14 */
-    U8                      BoardName[16];              /* 0x1C */
-    U8                      BoardAssembly[16];          /* 0x2C */
-    U8                      BoardTracerNumber[16];      /* 0x3C */
-} MPI2_CONFIG_PAGE_MAN_0,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_0,
-  Mpi2ManufacturingPage0_t, MPI2_POINTER pMpi2ManufacturingPage0_t;
-
-#define MPI2_MANUFACTURING0_PAGEVERSION                (0x00)
-
-
-/* Manufacturing Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_1
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    U8                      VPD[256];                   /* 0x04 */
-} MPI2_CONFIG_PAGE_MAN_1,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_1,
-  Mpi2ManufacturingPage1_t, MPI2_POINTER pMpi2ManufacturingPage1_t;
-
-#define MPI2_MANUFACTURING1_PAGEVERSION                (0x00)
-
-
-typedef struct _MPI2_CHIP_REVISION_ID
-{
-    U16 DeviceID;                                       /* 0x00 */
-    U8  PCIRevisionID;                                  /* 0x02 */
-    U8  Reserved;                                       /* 0x03 */
-} MPI2_CHIP_REVISION_ID, MPI2_POINTER PTR_MPI2_CHIP_REVISION_ID,
-  Mpi2ChipRevisionId_t, MPI2_POINTER pMpi2ChipRevisionId_t;
-
-
-/* Manufacturing Page 2 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
-#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS   (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_2
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    MPI2_CHIP_REVISION_ID   ChipId;                     /* 0x04 */
-    U32                     HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 0x08 */
-} MPI2_CONFIG_PAGE_MAN_2,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_2,
-  Mpi2ManufacturingPage2_t, MPI2_POINTER pMpi2ManufacturingPage2_t;
-
-#define MPI2_MANUFACTURING2_PAGEVERSION                 (0x00)
-
-
-/* Manufacturing Page 3 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI2_MAN_PAGE_3_INFO_WORDS
-#define MPI2_MAN_PAGE_3_INFO_WORDS          (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_3
-{
-    MPI2_CONFIG_PAGE_HEADER             Header;         /* 0x00 */
-    MPI2_CHIP_REVISION_ID               ChipId;         /* 0x04 */
-    U32                                 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/* 0x08 */
-} MPI2_CONFIG_PAGE_MAN_3,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_3,
-  Mpi2ManufacturingPage3_t, MPI2_POINTER pMpi2ManufacturingPage3_t;
-
-#define MPI2_MANUFACTURING3_PAGEVERSION                 (0x00)
-
-
-/* Manufacturing Page 4 */
-
-typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS
-{
-    U8                          PowerSaveFlags;                 /* 0x00 */
-    U8                          InternalOperationsSleepTime;    /* 0x01 */
-    U8                          InternalOperationsRunTime;      /* 0x02 */
-    U8                          HostIdleTime;                   /* 0x03 */
-} MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
-  MPI2_POINTER PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
-  Mpi2ManPage4PwrSaveSettings_t, MPI2_POINTER pMpi2ManPage4PwrSaveSettings_t;
-
-/* defines for the PowerSaveFlags field */
-#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE               (0x03)
-#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED           (0x00)
-#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE             (0x01)
-#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE               (0x02)
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_4
-{
-    MPI2_CONFIG_PAGE_HEADER             Header;                 /* 0x00 */
-    U32                                 Reserved1;              /* 0x04 */
-    U32                                 Flags;                  /* 0x08 */
-    U8                                  InquirySize;            /* 0x0C */
-    U8                                  Reserved2;              /* 0x0D */
-    U16                                 Reserved3;              /* 0x0E */
-    U8                                  InquiryData[56];        /* 0x10 */
-    U32                                 RAID0VolumeSettings;    /* 0x48 */
-    U32                                 RAID1EVolumeSettings;   /* 0x4C */
-    U32                                 RAID1VolumeSettings;    /* 0x50 */
-    U32                                 RAID10VolumeSettings;   /* 0x54 */
-    U32                                 Reserved4;              /* 0x58 */
-    U32                                 Reserved5;              /* 0x5C */
-    MPI2_MANPAGE4_PWR_SAVE_SETTINGS     PowerSaveSettings;      /* 0x60 */
-    U8                                  MaxOCEDisks;            /* 0x64 */
-    U8                                  ResyncRate;             /* 0x65 */
-    U16                                 DataScrubDuration;      /* 0x66 */
-    U8                                  MaxHotSpares;           /* 0x68 */
-    U8                                  MaxPhysDisksPerVol;     /* 0x69 */
-    U8                                  MaxPhysDisks;           /* 0x6A */
-    U8                                  MaxVolumes;             /* 0x6B */
-} MPI2_CONFIG_PAGE_MAN_4,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_4,
-  Mpi2ManufacturingPage4_t, MPI2_POINTER pMpi2ManufacturingPage4_t;
-
-#define MPI2_MANUFACTURING4_PAGEVERSION                 (0x0A)
-
-/* Manufacturing Page 4 Flags field */
-#define MPI2_MANPAGE4_METADATA_SIZE_MASK                (0x00030000)
-#define MPI2_MANPAGE4_METADATA_512MB                    (0x00000000)
-
-#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA                  (0x00008000)
-#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD               (0x00004000)
-#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR              (0x00002000)
-
-#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION            (0x00001C00)
-#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB             (0x00000000)
-#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION           (0x00000400)
-#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION        (0x00000800)
-#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION            (0x00000C00)
-
-#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING            (0x00000300)
-#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING         (0x00000000)
-#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING           (0x00000100)
-#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING      (0x00000200)
-
-#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER            (0x00000080)
-#define MPI2_MANPAGE4_RAID10_DISABLE                    (0x00000040)
-#define MPI2_MANPAGE4_RAID1E_DISABLE                    (0x00000020)
-#define MPI2_MANPAGE4_RAID1_DISABLE                     (0x00000010)
-#define MPI2_MANPAGE4_RAID0_DISABLE                     (0x00000008)
-#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE              (0x00000004)
-#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE            (0x00000002)
-#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA                (0x00000001)
-
-
-/* Manufacturing Page 5 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
-#define MPI2_MAN_PAGE_5_PHY_ENTRIES         (1)
-#endif
-
-typedef struct _MPI2_MANUFACTURING5_ENTRY
-{
-    U64                                 WWID;           /* 0x00 */
-    U64                                 DeviceName;     /* 0x08 */
-} MPI2_MANUFACTURING5_ENTRY, MPI2_POINTER PTR_MPI2_MANUFACTURING5_ENTRY,
-  Mpi2Manufacturing5Entry_t, MPI2_POINTER pMpi2Manufacturing5Entry_t;
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_5
-{
-    MPI2_CONFIG_PAGE_HEADER             Header;         /* 0x00 */
-    U8                                  NumPhys;        /* 0x04 */
-    U8                                  Reserved1;      /* 0x05 */
-    U16                                 Reserved2;      /* 0x06 */
-    U32                                 Reserved3;      /* 0x08 */
-    U32                                 Reserved4;      /* 0x0C */
-    MPI2_MANUFACTURING5_ENTRY           Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/* 0x08 */
-} MPI2_CONFIG_PAGE_MAN_5,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_5,
-  Mpi2ManufacturingPage5_t, MPI2_POINTER pMpi2ManufacturingPage5_t;
-
-#define MPI2_MANUFACTURING5_PAGEVERSION                 (0x03)
-
-
-/* Manufacturing Page 6 */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_6
-{
-    MPI2_CONFIG_PAGE_HEADER         Header;             /* 0x00 */
-    U32                             ProductSpecificInfo;/* 0x04 */
-} MPI2_CONFIG_PAGE_MAN_6,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_6,
-  Mpi2ManufacturingPage6_t, MPI2_POINTER pMpi2ManufacturingPage6_t;
-
-#define MPI2_MANUFACTURING6_PAGEVERSION                 (0x00)
-
-
-/* Manufacturing Page 7 */
-
-typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO
-{
-    U32                         Pinout;                 /* 0x00 */
-    U8                          Connector[16];          /* 0x04 */
-    U8                          Location;               /* 0x14 */
-	U8                          ReceptacleID;           /* 0x15 */
-    U16                         Slot;                   /* 0x16 */
-    U32                         Reserved2;              /* 0x18 */
-} MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
-  Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t;
-
-/* defines for the Pinout field */
-#define MPI2_MANPAGE7_PINOUT_LANE_MASK                  (0x0000FF00)
-#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT                 (8)
-
-#define MPI2_MANPAGE7_PINOUT_TYPE_MASK                  (0x000000FF)
-#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN               (0x00)
-#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE                (0x01)
-#define MPI2_MANPAGE7_PINOUT_SFF_8482                   (0x02)
-#define MPI2_MANPAGE7_PINOUT_SFF_8486                   (0x03)
-#define MPI2_MANPAGE7_PINOUT_SFF_8484                   (0x04)
-#define MPI2_MANPAGE7_PINOUT_SFF_8087                   (0x05)
-#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I                (0x06)
-#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I                (0x07)
-#define MPI2_MANPAGE7_PINOUT_SFF_8470                   (0x08)
-#define MPI2_MANPAGE7_PINOUT_SFF_8088                   (0x09)
-#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X                (0x0A)
-#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X                (0x0B)
-#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X               (0x0C)
-#define MPI2_MANPAGE7_PINOUT_SFF_8436                   (0x0D)
-
-/* defines for the Location field */
-#define MPI2_MANPAGE7_LOCATION_UNKNOWN                  (0x01)
-#define MPI2_MANPAGE7_LOCATION_INTERNAL                 (0x02)
-#define MPI2_MANPAGE7_LOCATION_EXTERNAL                 (0x04)
-#define MPI2_MANPAGE7_LOCATION_SWITCHABLE               (0x08)
-#define MPI2_MANPAGE7_LOCATION_AUTO                     (0x10)
-#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT              (0x20)
-#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED            (0x80)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
-#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX  (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_7
-{
-    MPI2_CONFIG_PAGE_HEADER         Header;             /* 0x00 */
-    U32                             Reserved1;          /* 0x04 */
-    U32                             Reserved2;          /* 0x08 */
-    U32                             Flags;              /* 0x0C */
-    U8                              EnclosureName[16];  /* 0x10 */
-    U8                              NumPhys;            /* 0x20 */
-    U8                              Reserved3;          /* 0x21 */
-    U16                             Reserved4;          /* 0x22 */
-    MPI2_MANPAGE7_CONNECTOR_INFO    ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /* 0x24 */
-} MPI2_CONFIG_PAGE_MAN_7,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7,
-  Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t;
-
-#define MPI2_MANUFACTURING7_PAGEVERSION                 (0x01)
-
-/* defines for the Flags field */
-#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL         (0x00000008)
-#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER       (0x00000002)
-#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO                (0x00000001)
-
-
-/*
- * Generic structure to use for product-specific manufacturing pages
- * (currently Manufacturing Page 8 through Manufacturing Page 31).
- */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_PS
-{
-    MPI2_CONFIG_PAGE_HEADER         Header;             /* 0x00 */
-    U32                             ProductSpecificInfo;/* 0x04 */
-} MPI2_CONFIG_PAGE_MAN_PS,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_PS,
-  Mpi2ManufacturingPagePS_t, MPI2_POINTER pMpi2ManufacturingPagePS_t;
-
-#define MPI2_MANUFACTURING8_PAGEVERSION                 (0x00)
-#define MPI2_MANUFACTURING9_PAGEVERSION                 (0x00)
-#define MPI2_MANUFACTURING10_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING11_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING12_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING13_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING14_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING15_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING16_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING17_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING18_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING19_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING20_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING21_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING22_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING23_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING24_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING25_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING26_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING27_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING28_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING29_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING30_PAGEVERSION                (0x00)
-#define MPI2_MANUFACTURING31_PAGEVERSION                (0x00)
-
-
-/****************************************************************************
-*   IO Unit Config Pages
-****************************************************************************/
-
-/* IO Unit Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    U64                     UniqueValue;                /* 0x04 */
-    MPI2_VERSION_UNION      NvdataVersionDefault;       /* 0x08 */
-    MPI2_VERSION_UNION      NvdataVersionPersistent;    /* 0x0A */
-} MPI2_CONFIG_PAGE_IO_UNIT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
-  Mpi2IOUnitPage0_t, MPI2_POINTER pMpi2IOUnitPage0_t;
-
-#define MPI2_IOUNITPAGE0_PAGEVERSION                    (0x02)
-
-
-/* IO Unit Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    U32                     Flags;                      /* 0x04 */
-} MPI2_CONFIG_PAGE_IO_UNIT_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
-  Mpi2IOUnitPage1_t, MPI2_POINTER pMpi2IOUnitPage1_t;
-
-#define MPI2_IOUNITPAGE1_PAGEVERSION                    (0x04)
-
-/* IO Unit Page 1 Flags defines */
-#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK       (0x00004000)
-#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY    (0x00000800)
-#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE          (0x00000600)
-#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT         (9)
-#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE        (0x00000000)
-#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE       (0x00000200)
-#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE     (0x00000400)
-#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE       (0x00000100)
-#define MPI2_IOUNITPAGE1_DISABLE_IR                     (0x00000040)
-#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
-#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID        (0x00000004)
-
-
-/* IO Unit Page 3 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for GPIOCount at runtime.
- */
-#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
-#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX    (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                                   /* 0x00 */
-    U8                      GPIOCount;                                /* 0x04 */
-    U8                      Reserved1;                                /* 0x05 */
-    U16                     Reserved2;                                /* 0x06 */
-    U16                     GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/* 0x08 */
-} MPI2_CONFIG_PAGE_IO_UNIT_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
-  Mpi2IOUnitPage3_t, MPI2_POINTER pMpi2IOUnitPage3_t;
-
-#define MPI2_IOUNITPAGE3_PAGEVERSION                    (0x01)
-
-/* defines for IO Unit Page 3 GPIOVal field */
-#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK             (0xFFFC)
-#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT            (2)
-#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF               (0x0000)
-#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON                (0x0001)
-
-
-/* IO Unit Page 5 */
-
-/*
- * Upper layer code (drivers, utilities, etc.) should leave this define set to
- * one and check the value returned for NumDmaEngines at runtime.
- */
-#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
-#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES      (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
-    MPI2_CONFIG_PAGE_HEADER Header;				/* 0x00 */
-    U64                     RaidAcceleratorBufferBaseAddress;  /* 0x04 */
-    U64                     RaidAcceleratorBufferSize;         /* 0x0C */
-    U64                     RaidAcceleratorControlBaseAddress; /* 0x14 */
-    U8                      RAControlSize;                     /* 0x1C */
-    U8                      NumDmaEngines;                     /* 0x1D */
-    U8                      RAMinControlSize;                  /* 0x1E */
-    U8                      RAMaxControlSize;                  /* 0x1F */
-    U32                     Reserved1;                         /* 0x20 */
-    U32                     Reserved2;                         /* 0x24 */
-    U32                     Reserved3;                         /* 0x28 */
-    U32                     DmaEngineCapabilities
-				[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */
-} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
-  Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t;
-
-#define MPI2_IOUNITPAGE5_PAGEVERSION                    (0x00)
-
-/* defines for IO Unit Page 5 DmaEngineCapabilities field */
-#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS      (0xFFFF0000)
-#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS     (16)
-
-#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP                   (0x0008)
-#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION      (0x0004)
-#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING                (0x0002)
-#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION             (0x0001)
-
-
-/* IO Unit Page 6 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
-    MPI2_CONFIG_PAGE_HEADER Header;                                 /* 0x00 */
-    U16                     Flags;                                  /* 0x04 */
-    U8                      RAHostControlSize;                      /* 0x06 */
-    U8                      Reserved0;                              /* 0x07 */
-    U64                     RaidAcceleratorHostControlBaseAddress;  /* 0x08 */
-    U32                     Reserved1;                              /* 0x10 */
-    U32                     Reserved2;                              /* 0x14 */
-    U32                     Reserved3;                              /* 0x18 */
-} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
-  Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t;
-
-#define MPI2_IOUNITPAGE6_PAGEVERSION                    (0x00)
-
-/* defines for IO Unit Page 6 Flags field */
-#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR  (0x0001)
-
-
-/* IO Unit Page 7 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
-    MPI2_CONFIG_PAGE_HEADER Header;                                 /* 0x00 */
-    U16                     Reserved1;                              /* 0x04 */
-    U8                      PCIeWidth;                              /* 0x06 */
-    U8                      PCIeSpeed;                              /* 0x07 */
-    U32                     ProcessorState;                         /* 0x08 */
-    U32                     PowerManagementCapabilities;            /* 0x0C */
-    U16                     IOCTemperature;                         /* 0x10 */
-    U8                      IOCTemperatureUnits;                    /* 0x12 */
-    U8                      IOCSpeed;                               /* 0x13 */
-	U16                     BoardTemperature;		    /* 0x14 */
-	U8                      BoardTemperatureUnits;		    /* 0x16 */
-	U8                      Reserved3;			    /* 0x17 */
-	U32                     Reserved4;                          /* 0x18 */
-	U32                     Reserved5;                          /* 0x1C */
-	U32                     Reserved6;                          /* 0x20 */
-	U32                     Reserved7;                          /* 0x24 */
-} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
-  Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t;
-
-#define MPI2_IOUNITPAGE7_PAGEVERSION                    (0x04)
-
-/* defines for IO Unit Page 7 PCIeWidth field */
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1              (0x01)
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2              (0x02)
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4              (0x04)
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8              (0x08)
-
-/* defines for IO Unit Page 7 PCIeSpeed field */
-#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS        (0x00)
-#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS        (0x01)
-#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS        (0x02)
-
-/* defines for IO Unit Page 7 ProcessorState field */
-#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND         (0x0000000F)
-#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND        (0)
-
-#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT         (0x00)
-#define MPI2_IOUNITPAGE7_PSTATE_DISABLED            (0x01)
-#define MPI2_IOUNITPAGE7_PSTATE_ENABLED             (0x02)
-
-/* defines for IO Unit Page 7 PowerManagementCapabilities field */
-#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED    (0x00000400)
-#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED    (0x00000200)
-#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED    (0x00000100)
-#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE    (0x00000008) /* obsolete */
-#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE    (0x00000004) /* obsolete */
-
-/* defines for IO Unit Page 7 IOCTemperatureUnits field */
-#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT       (0x00)
-#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT        (0x01)
-#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS           (0x02)
-
-/* defines for IO Unit Page 7 IOCSpeed field */
-#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL             (0x01)
-#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF             (0x02)
-#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER          (0x04)
-#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH           (0x08)
-
-/* defines for IO Unit Page 7 BoardTemperatureUnits field */
-#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT     (0x00)
-#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT      (0x01)
-#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS         (0x02)
-
-/* IO Unit Page 8 */
-
-#define MPI2_IOUNIT8_NUM_THRESHOLDS     (4)
-
-typedef struct _MPI2_IOUNIT8_SENSOR {
-	U16                     Flags;                /* 0x00 */
-	U16                     Reserved1;            /* 0x02 */
-	U16
-		Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */
-	U32                     Reserved2;            /* 0x0C */
-	U32                     Reserved3;            /* 0x10 */
-	U32                     Reserved4;            /* 0x14 */
-} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR,
-Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t;
-
-/* defines for IO Unit Page 8 Sensor Flags field */
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE         (0x0008)
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE         (0x0004)
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE         (0x0002)
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE         (0x0001)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumSensors at runtime.
- */
-#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
-#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES     (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
-	MPI2_CONFIG_PAGE_HEADER Header;               /* 0x00 */
-	U32                     Reserved1;            /* 0x04 */
-	U32                     Reserved2;            /* 0x08 */
-	U8                      NumSensors;           /* 0x0C */
-	U8                      PollingInterval;      /* 0x0D */
-	U16                     Reserved3;            /* 0x0E */
-	MPI2_IOUNIT8_SENSOR
-			Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */
-} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
-Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t;
-
-#define MPI2_IOUNITPAGE8_PAGEVERSION                    (0x00)
-
-
-/* IO Unit Page 9 */
-
-typedef struct _MPI2_IOUNIT9_SENSOR {
-	U16                     CurrentTemperature;     /* 0x00 */
-	U16                     Reserved1;              /* 0x02 */
-	U8                      Flags;                  /* 0x04 */
-	U8                      Reserved2;              /* 0x05 */
-	U16                     Reserved3;              /* 0x06 */
-	U32                     Reserved4;              /* 0x08 */
-	U32                     Reserved5;              /* 0x0C */
-} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR,
-Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t;
-
-/* defines for IO Unit Page 9 Sensor Flags field */
-#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID        (0x01)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumSensors at runtime.
- */
-#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
-#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES     (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
-	MPI2_CONFIG_PAGE_HEADER Header;                /* 0x00 */
-	U32                     Reserved1;             /* 0x04 */
-	U32                     Reserved2;             /* 0x08 */
-	U8                      NumSensors;            /* 0x0C */
-	U8                      Reserved4;             /* 0x0D */
-	U16                     Reserved3;             /* 0x0E */
-	MPI2_IOUNIT9_SENSOR
-			Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */
-} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
-Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t;
-
-#define MPI2_IOUNITPAGE9_PAGEVERSION                    (0x00)
-
-
-/* IO Unit Page 10 */
-
-typedef struct _MPI2_IOUNIT10_FUNCTION {
-	U8                      CreditPercent;      /* 0x00 */
-	U8                      Reserved1;          /* 0x01 */
-	U16                     Reserved2;          /* 0x02 */
-} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION,
-Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t;
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumFunctions at runtime.
- */
-#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
-#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES      (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
-	MPI2_CONFIG_PAGE_HEADER Header;                    /* 0x00 */
-	U8                      NumFunctions;             /* 0x04 */
-	U8                      Reserved1;              /* 0x05 */
-	U16                     Reserved2;              /* 0x06 */
-	U32                     Reserved3;              /* 0x08 */
-	U32                     Reserved4;		/* 0x0C */
-	MPI2_IOUNIT10_FUNCTION
-		Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/* 0x10 */
-} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
-Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t;
-
-#define MPI2_IOUNITPAGE10_PAGEVERSION                   (0x01)
-
-
-
-/****************************************************************************
-*   IOC Config Pages
-****************************************************************************/
-
-/* IOC Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_0
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    U32                     Reserved1;                  /* 0x04 */
-    U32                     Reserved2;                  /* 0x08 */
-    U16                     VendorID;                   /* 0x0C */
-    U16                     DeviceID;                   /* 0x0E */
-    U8                      RevisionID;                 /* 0x10 */
-    U8                      Reserved3;                  /* 0x11 */
-    U16                     Reserved4;                  /* 0x12 */
-    U32                     ClassCode;                  /* 0x14 */
-    U16                     SubsystemVendorID;          /* 0x18 */
-    U16                     SubsystemID;                /* 0x1A */
-} MPI2_CONFIG_PAGE_IOC_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_0,
-  Mpi2IOCPage0_t, MPI2_POINTER pMpi2IOCPage0_t;
-
-#define MPI2_IOCPAGE0_PAGEVERSION                       (0x02)
-
-
-/* IOC Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_1
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    U32                     Flags;                      /* 0x04 */
-    U32                     CoalescingTimeout;          /* 0x08 */
-    U8                      CoalescingDepth;            /* 0x0C */
-    U8                      PCISlotNum;                 /* 0x0D */
-    U8                      PCIBusNum;                  /* 0x0E */
-    U8                      PCIDomainSegment;           /* 0x0F */
-    U32                     Reserved1;                  /* 0x10 */
-    U32                     Reserved2;                  /* 0x14 */
-} MPI2_CONFIG_PAGE_IOC_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_1,
-  Mpi2IOCPage1_t, MPI2_POINTER pMpi2IOCPage1_t;
-
-#define MPI2_IOCPAGE1_PAGEVERSION                       (0x05)
-
-/* defines for IOC Page 1 Flags field */
-#define MPI2_IOCPAGE1_REPLY_COALESCING                  (0x00000001)
-
-#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN                (0xFF)
-#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN                 (0xFF)
-#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN                 (0xFF)
-
-/* IOC Page 6 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_6
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                         /* 0x00 */
-    U32                     CapabilitiesFlags;              /* 0x04 */
-    U8                      MaxDrivesRAID0;                 /* 0x08 */
-    U8                      MaxDrivesRAID1;                 /* 0x09 */
-    U8                      MaxDrivesRAID1E;                /* 0x0A */
-    U8                      MaxDrivesRAID10;                /* 0x0B */
-    U8                      MinDrivesRAID0;                 /* 0x0C */
-    U8                      MinDrivesRAID1;                 /* 0x0D */
-    U8                      MinDrivesRAID1E;                /* 0x0E */
-    U8                      MinDrivesRAID10;                /* 0x0F */
-    U32                     Reserved1;                      /* 0x10 */
-    U8                      MaxGlobalHotSpares;             /* 0x14 */
-    U8                      MaxPhysDisks;                   /* 0x15 */
-    U8                      MaxVolumes;                     /* 0x16 */
-    U8                      MaxConfigs;                     /* 0x17 */
-    U8                      MaxOCEDisks;                    /* 0x18 */
-    U8                      Reserved2;                      /* 0x19 */
-    U16                     Reserved3;                      /* 0x1A */
-    U32                     SupportedStripeSizeMapRAID0;    /* 0x1C */
-    U32                     SupportedStripeSizeMapRAID1E;   /* 0x20 */
-    U32                     SupportedStripeSizeMapRAID10;   /* 0x24 */
-    U32                     Reserved4;                      /* 0x28 */
-    U32                     Reserved5;                      /* 0x2C */
-    U16                     DefaultMetadataSize;            /* 0x30 */
-    U16                     Reserved6;                      /* 0x32 */
-    U16                     MaxBadBlockTableEntries;        /* 0x34 */
-    U16                     Reserved7;                      /* 0x36 */
-    U32                     IRNvsramVersion;                /* 0x38 */
-} MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6,
-  Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t;
-
-#define MPI2_IOCPAGE6_PAGEVERSION                       (0x05)
-
-/* defines for IOC Page 6 CapabilitiesFlags */
-#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT      (0x00000020)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT          (0x00000010)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT           (0x00000008)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT          (0x00000004)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT           (0x00000002)
-#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE        (0x00000001)
-
-
-/* IOC Page 7 */
-
-#define MPI2_IOCPAGE7_EVENTMASK_WORDS       (4)
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_7
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    U32                     Reserved1;                  /* 0x04 */
-    U32                     EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */
-    U16                     SASBroadcastPrimitiveMasks; /* 0x18 */
-	U16                     SASNotifyPrimitiveMasks;    /* 0x1A */
-    U32                     Reserved3;                  /* 0x1C */
-} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7,
-  Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t;
-
-#define MPI2_IOCPAGE7_PAGEVERSION                       (0x02)
-
-
-/* IOC Page 8 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_8
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    U8                      NumDevsPerEnclosure;        /* 0x04 */
-    U8                      Reserved1;                  /* 0x05 */
-    U16                     Reserved2;                  /* 0x06 */
-    U16                     MaxPersistentEntries;       /* 0x08 */
-    U16                     MaxNumPhysicalMappedIDs;    /* 0x0A */
-    U16                     Flags;                      /* 0x0C */
-    U16                     Reserved3;                  /* 0x0E */
-    U16                     IRVolumeMappingFlags;       /* 0x10 */
-    U16                     Reserved4;                  /* 0x12 */
-    U32                     Reserved5;                  /* 0x14 */
-} MPI2_CONFIG_PAGE_IOC_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_8,
-  Mpi2IOCPage8_t, MPI2_POINTER pMpi2IOCPage8_t;
-
-#define MPI2_IOCPAGE8_PAGEVERSION                       (0x00)
-
-/* defines for IOC Page 8 Flags field */
-#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1             (0x00000020)
-#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0         (0x00000010)
-
-#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE           (0x0000000E)
-#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING  (0x00000000)
-#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING      (0x00000002)
-
-#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING  (0x00000001)
-#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING   (0x00000000)
-
-/* defines for IOC Page 8 IRVolumeMappingFlags */
-#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE  (0x00000003)
-#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING        (0x00000000)
-#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING       (0x00000001)
-
-
-/****************************************************************************
-*   BIOS Config Pages
-****************************************************************************/
-
-/* BIOS Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_1
-{
-	MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-	U32                     BiosOptions;                /* 0x04 */
-	U32                     IOCSettings;                /* 0x08 */
-	U8			SSUTimeout;		    /* 0x0C */
-	U8			Reserved1;		    /* 0x0D */
-	U16			Reserved2;		    /* 0x0E */
-	U32                     DeviceSettings;             /* 0x10 */
-	U16                     NumberOfDevices;            /* 0x14 */
-	U16                     UEFIVersion;                /* 0x16 */
-	U16                     IOTimeoutBlockDevicesNonRM; /* 0x18 */
-	U16                     IOTimeoutSequential;        /* 0x1A */
-	U16                     IOTimeoutOther;             /* 0x1C */
-	U16                     IOTimeoutBlockDevicesRM;    /* 0x1E */
-} MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1,
-  Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t;
-
-#define MPI2_BIOSPAGE1_PAGEVERSION                      (0x07)
-
-/* values for BIOS Page 1 BiosOptions field */
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK			(0x00003800)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL			(0x00000000)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE			(0x00000800)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID			(0x00001000)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS			(0x00001800)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY			(0x00002000)
-
-#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS                 (0x00000400)
-
-#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD       (0x00000300)
-#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD   (0x00000000)
-#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD       (0x00000100)
-#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD    (0x00000200)
-#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD    (0x00000300)
-
-#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID                  (0x000000F0)
-#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID                   (0x00000000)
-
-#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION   (0x00000006)
-#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII              (0x00000000)
-#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII             (0x00000002)
-#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII       (0x00000004)
-
-#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS                 (0x00000001)
-
-/* values for BIOS Page 1 IOCSettings field */
-#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE      (0x00030000)
-#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT       (0x00000000)
-#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT          (0x00010000)
-
-#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING           (0x000000C0)
-#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING           (0x00000000)
-#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING           (0x00000040)
-#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING          (0x00000080)
-
-#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT      (0x00000030)
-#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT                (0x00000000)
-#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT              (0x00000010)
-#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT                (0x00000020)
-#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT               (0x00000030)
-
-#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS             (0x00000008)
-
-/* values for BIOS Page 1 DeviceSettings field */
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING     (0x00000010)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN           (0x00000008)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN            (0x00000004)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN        (0x00000002)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN         (0x00000001)
-
-/* defines for BIOS Page 1 UEFIVersion field */
-#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK              (0xFF00)
-#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT             (8)
-#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK              (0x00FF)
-#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT             (0)
-
-
-
-/* BIOS Page 2 */
-
-typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER
-{
-    U32         Reserved1;                              /* 0x00 */
-    U32         Reserved2;                              /* 0x04 */
-    U32         Reserved3;                              /* 0x08 */
-    U32         Reserved4;                              /* 0x0C */
-    U32         Reserved5;                              /* 0x10 */
-    U32         Reserved6;                              /* 0x14 */
-} MPI2_BOOT_DEVICE_ADAPTER_ORDER,
-  MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
-  Mpi2BootDeviceAdapterOrder_t, MPI2_POINTER pMpi2BootDeviceAdapterOrder_t;
-
-typedef struct _MPI2_BOOT_DEVICE_SAS_WWID
-{
-    U64         SASAddress;                             /* 0x00 */
-    U8          LUN[8];                                 /* 0x08 */
-    U32         Reserved1;                              /* 0x10 */
-    U32         Reserved2;                              /* 0x14 */
-} MPI2_BOOT_DEVICE_SAS_WWID, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_SAS_WWID,
-  Mpi2BootDeviceSasWwid_t, MPI2_POINTER pMpi2BootDeviceSasWwid_t;
-
-typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT
-{
-    U64         EnclosureLogicalID;                     /* 0x00 */
-    U32         Reserved1;                              /* 0x08 */
-    U32         Reserved2;                              /* 0x0C */
-    U16         SlotNumber;                             /* 0x10 */
-    U16         Reserved3;                              /* 0x12 */
-    U32         Reserved4;                              /* 0x14 */
-} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
-  MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
-  Mpi2BootDeviceEnclosureSlot_t, MPI2_POINTER pMpi2BootDeviceEnclosureSlot_t;
-
-typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME
-{
-    U64         DeviceName;                             /* 0x00 */
-    U8          LUN[8];                                 /* 0x08 */
-    U32         Reserved1;                              /* 0x10 */
-    U32         Reserved2;                              /* 0x14 */
-} MPI2_BOOT_DEVICE_DEVICE_NAME, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
-  Mpi2BootDeviceDeviceName_t, MPI2_POINTER pMpi2BootDeviceDeviceName_t;
-
-typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE
-{
-    MPI2_BOOT_DEVICE_ADAPTER_ORDER  AdapterOrder;
-    MPI2_BOOT_DEVICE_SAS_WWID       SasWwid;
-    MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
-    MPI2_BOOT_DEVICE_DEVICE_NAME    DeviceName;
-} MPI2_BIOSPAGE2_BOOT_DEVICE, MPI2_POINTER PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
-  Mpi2BiosPage2BootDevice_t, MPI2_POINTER pMpi2BiosPage2BootDevice_t;
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_2
-{
-    MPI2_CONFIG_PAGE_HEADER     Header;                 /* 0x00 */
-    U32                         Reserved1;              /* 0x04 */
-    U32                         Reserved2;              /* 0x08 */
-    U32                         Reserved3;              /* 0x0C */
-    U32                         Reserved4;              /* 0x10 */
-    U32                         Reserved5;              /* 0x14 */
-    U32                         Reserved6;              /* 0x18 */
-    U8                          ReqBootDeviceForm;      /* 0x1C */
-    U8                          Reserved7;              /* 0x1D */
-    U16                         Reserved8;              /* 0x1E */
-    MPI2_BIOSPAGE2_BOOT_DEVICE  RequestedBootDevice;    /* 0x20 */
-    U8                          ReqAltBootDeviceForm;   /* 0x38 */
-    U8                          Reserved9;              /* 0x39 */
-    U16                         Reserved10;             /* 0x3A */
-    MPI2_BIOSPAGE2_BOOT_DEVICE  RequestedAltBootDevice; /* 0x3C */
-    U8                          CurrentBootDeviceForm;  /* 0x58 */
-    U8                          Reserved11;             /* 0x59 */
-    U16                         Reserved12;             /* 0x5A */
-    MPI2_BIOSPAGE2_BOOT_DEVICE  CurrentBootDevice;      /* 0x58 */
-} MPI2_CONFIG_PAGE_BIOS_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_2,
-  Mpi2BiosPage2_t, MPI2_POINTER pMpi2BiosPage2_t;
-
-#define MPI2_BIOSPAGE2_PAGEVERSION                      (0x04)
-
-/* values for BIOS Page 2 BootDeviceForm fields */
-#define MPI2_BIOSPAGE2_FORM_MASK                        (0x0F)
-#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED         (0x00)
-#define MPI2_BIOSPAGE2_FORM_SAS_WWID                    (0x05)
-#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT              (0x06)
-#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME                 (0x07)
-
-
-/* BIOS Page 3 */
-
-typedef struct _MPI2_ADAPTER_INFO
-{
-    U8      PciBusNumber;                               /* 0x00 */
-    U8      PciDeviceAndFunctionNumber;                 /* 0x01 */
-    U16     AdapterFlags;                               /* 0x02 */
-} MPI2_ADAPTER_INFO, MPI2_POINTER PTR_MPI2_ADAPTER_INFO,
-  Mpi2AdapterInfo_t, MPI2_POINTER pMpi2AdapterInfo_t;
-
-#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED                (0x0001)
-#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS             (0x0002)
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_3
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    U32                     GlobalFlags;                /* 0x04 */
-    U32                     BiosVersion;                /* 0x08 */
-    MPI2_ADAPTER_INFO       AdapterOrder[4];            /* 0x0C */
-    U32                     Reserved1;                  /* 0x1C */
-} MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3,
-  Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t;
-
-#define MPI2_BIOSPAGE3_PAGEVERSION                      (0x00)
-
-/* values for BIOS Page 3 GlobalFlags */
-#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR             (0x00000002)
-#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE             (0x00000004)
-#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE        (0x00000010)
-
-#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK      (0x000000E0)
-#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY      (0x00000000)
-#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY            (0x00000020)
-#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY        (0x00000040)
-
-
-/* BIOS Page 4 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
-#define MPI2_BIOS_PAGE_4_PHY_ENTRIES        (1)
-#endif
-
-typedef struct _MPI2_BIOS4_ENTRY
-{
-    U64                     ReassignmentWWID;       /* 0x00 */
-    U64                     ReassignmentDeviceName; /* 0x08 */
-} MPI2_BIOS4_ENTRY, MPI2_POINTER PTR_MPI2_BIOS4_ENTRY,
-  Mpi2MBios4Entry_t, MPI2_POINTER pMpi2Bios4Entry_t;
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_4
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                             /* 0x00 */
-    U8                      NumPhys;                            /* 0x04 */
-    U8                      Reserved1;                          /* 0x05 */
-    U16                     Reserved2;                          /* 0x06 */
-    MPI2_BIOS4_ENTRY        Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES];  /* 0x08 */
-} MPI2_CONFIG_PAGE_BIOS_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_4,
-  Mpi2BiosPage4_t, MPI2_POINTER pMpi2BiosPage4_t;
-
-#define MPI2_BIOSPAGE4_PAGEVERSION                      (0x01)
-
-
-/****************************************************************************
-*   RAID Volume Config Pages
-****************************************************************************/
-
-/* RAID Volume Page 0 */
-
-typedef struct _MPI2_RAIDVOL0_PHYS_DISK
-{
-    U8                      RAIDSetNum;                 /* 0x00 */
-    U8                      PhysDiskMap;                /* 0x01 */
-    U8                      PhysDiskNum;                /* 0x02 */
-    U8                      Reserved;                   /* 0x03 */
-} MPI2_RAIDVOL0_PHYS_DISK, MPI2_POINTER PTR_MPI2_RAIDVOL0_PHYS_DISK,
-  Mpi2RaidVol0PhysDisk_t, MPI2_POINTER pMpi2RaidVol0PhysDisk_t;
-
-/* defines for the PhysDiskMap field */
-#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY                  (0x01)
-#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY                (0x02)
-
-typedef struct _MPI2_RAIDVOL0_SETTINGS
-{
-    U16                     Settings;                   /* 0x00 */
-    U8                      HotSparePool;               /* 0x01 */
-    U8                      Reserved;                   /* 0x02 */
-} MPI2_RAIDVOL0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDVOL0_SETTINGS,
-  Mpi2RaidVol0Settings_t, MPI2_POINTER pMpi2RaidVol0Settings_t;
-
-/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
-#define MPI2_RAID_HOT_SPARE_POOL_0                      (0x01)
-#define MPI2_RAID_HOT_SPARE_POOL_1                      (0x02)
-#define MPI2_RAID_HOT_SPARE_POOL_2                      (0x04)
-#define MPI2_RAID_HOT_SPARE_POOL_3                      (0x08)
-#define MPI2_RAID_HOT_SPARE_POOL_4                      (0x10)
-#define MPI2_RAID_HOT_SPARE_POOL_5                      (0x20)
-#define MPI2_RAID_HOT_SPARE_POOL_6                      (0x40)
-#define MPI2_RAID_HOT_SPARE_POOL_7                      (0x80)
-
-/* RAID Volume Page 0 VolumeSettings defines */
-#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX     (0x0008)
-#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)
-
-#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING        (0x0003)
-#define MPI2_RAIDVOL0_SETTING_UNCHANGED                 (0x0000)
-#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING     (0x0001)
-#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING      (0x0002)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhysDisks at runtime.
- */
-#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
-#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX       (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    U16                     DevHandle;                  /* 0x04 */
-    U8                      VolumeState;                /* 0x06 */
-    U8                      VolumeType;                 /* 0x07 */
-    U32                     VolumeStatusFlags;          /* 0x08 */
-    MPI2_RAIDVOL0_SETTINGS  VolumeSettings;             /* 0x0C */
-    U64                     MaxLBA;                     /* 0x10 */
-    U32                     StripeSize;                 /* 0x18 */
-    U16                     BlockSize;                  /* 0x1C */
-    U16                     Reserved1;                  /* 0x1E */
-    U8                      SupportedPhysDisks;         /* 0x20 */
-    U8                      ResyncRate;                 /* 0x21 */
-    U16                     DataScrubDuration;          /* 0x22 */
-    U8                      NumPhysDisks;               /* 0x24 */
-    U8                      Reserved2;                  /* 0x25 */
-    U8                      Reserved3;                  /* 0x26 */
-    U8                      InactiveStatus;             /* 0x27 */
-    MPI2_RAIDVOL0_PHYS_DISK PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /* 0x28 */
-} MPI2_CONFIG_PAGE_RAID_VOL_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
-  Mpi2RaidVolPage0_t, MPI2_POINTER pMpi2RaidVolPage0_t;
-
-#define MPI2_RAIDVOLPAGE0_PAGEVERSION           (0x0A)
-
-/* values for RAID VolumeState */
-#define MPI2_RAID_VOL_STATE_MISSING                         (0x00)
-#define MPI2_RAID_VOL_STATE_FAILED                          (0x01)
-#define MPI2_RAID_VOL_STATE_INITIALIZING                    (0x02)
-#define MPI2_RAID_VOL_STATE_ONLINE                          (0x03)
-#define MPI2_RAID_VOL_STATE_DEGRADED                        (0x04)
-#define MPI2_RAID_VOL_STATE_OPTIMAL                         (0x05)
-
-/* values for RAID VolumeType */
-#define MPI2_RAID_VOL_TYPE_RAID0                            (0x00)
-#define MPI2_RAID_VOL_TYPE_RAID1E                           (0x01)
-#define MPI2_RAID_VOL_TYPE_RAID1                            (0x02)
-#define MPI2_RAID_VOL_TYPE_RAID10                           (0x05)
-#define MPI2_RAID_VOL_TYPE_UNKNOWN                          (0xFF)
-
-/* values for RAID Volume Page 0 VolumeStatusFlags field */
-#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC            (0x02000000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING        (0x01000000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING               (0x00800000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING      (0x00400000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT      (0x00200000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB                (0x00100000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK         (0x00080000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION        (0x00040000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT           (0x00020000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS        (0x00010000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT        (0x00000080)
-#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED               (0x00000040)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE              (0x00000020)
-#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR          (0x00000000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR        (0x00000010)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL      (0x00000008)
-#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE           (0x00000004)
-#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED                  (0x00000002)
-#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED                   (0x00000001)
-
-/* values for RAID Volume Page 0 SupportedPhysDisks field */
-#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS             (0x08)
-#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS                    (0x04)
-#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL                  (0x02)
-#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL                 (0x01)
-
-/* values for RAID Volume Page 0 InactiveStatus field */
-#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE                  (0x00)
-#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE           (0x01)
-#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE           (0x02)
-#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE    (0x03)
-#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE             (0x04)
-#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE    (0x05)
-#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED                (0x06)
-
-
-/* RAID Volume Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1
-{
-    MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
-    U16                     DevHandle;                  /* 0x04 */
-    U16                     Reserved0;                  /* 0x06 */
-    U8                      GUID[24];                   /* 0x08 */
-    U8                      Name[16];                   /* 0x20 */
-    U64                     WWID;                       /* 0x30 */
-    U32                     Reserved1;                  /* 0x38 */
-    U32                     Reserved2;                  /* 0x3C */
-} MPI2_CONFIG_PAGE_RAID_VOL_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
-  Mpi2RaidVolPage1_t, MPI2_POINTER pMpi2RaidVolPage1_t;
-
-#define MPI2_RAIDVOLPAGE1_PAGEVERSION           (0x03)
-
-
-/****************************************************************************
-*   RAID Physical Disk Config Pages
-****************************************************************************/
-
-/* RAID Physical Disk Page 0 */
-
-typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS
-{
-    U16                     Reserved1;                  /* 0x00 */
-    U8                      HotSparePool;               /* 0x02 */
-    U8                      Reserved2;                  /* 0x03 */
-} MPI2_RAIDPHYSDISK0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
-  Mpi2RaidPhysDisk0Settings_t, MPI2_POINTER pMpi2RaidPhysDisk0Settings_t;
-
-/* use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */
-
-typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA
-{
-    U8                      VendorID[8];                /* 0x00 */
-    U8                      ProductID[16];              /* 0x08 */
-    U8                      ProductRevLevel[4];         /* 0x18 */
-    U8                      SerialNum[32];              /* 0x1C */
-} MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
-  MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
-  Mpi2RaidPhysDisk0InquiryData_t, MPI2_POINTER pMpi2RaidPhysDisk0InquiryData_t;
-
-typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0
-{
-    MPI2_CONFIG_PAGE_HEADER         Header;                     /* 0x00 */
-    U16                             DevHandle;                  /* 0x04 */
-    U8                              Reserved1;                  /* 0x06 */
-    U8                              PhysDiskNum;                /* 0x07 */
-    MPI2_RAIDPHYSDISK0_SETTINGS     PhysDiskSettings;           /* 0x08 */
-    U32                             Reserved2;                  /* 0x0C */
-    MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData;                /* 0x10 */
-    U32                             Reserved3;                  /* 0x4C */
-    U8                              PhysDiskState;              /* 0x50 */
-    U8                              OfflineReason;              /* 0x51 */
-    U8                              IncompatibleReason;         /* 0x52 */
-    U8                              PhysDiskAttributes;         /* 0x53 */
-    U32                             PhysDiskStatusFlags;        /* 0x54 */
-    U64                             DeviceMaxLBA;               /* 0x58 */
-    U64                             HostMaxLBA;                 /* 0x60 */
-    U64                             CoercedMaxLBA;              /* 0x68 */
-    U16                             BlockSize;                  /* 0x70 */
-    U16                             Reserved5;                  /* 0x72 */
-    U32                             Reserved6;                  /* 0x74 */
-} MPI2_CONFIG_PAGE_RD_PDISK_0,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
-  Mpi2RaidPhysDiskPage0_t, MPI2_POINTER pMpi2RaidPhysDiskPage0_t;
-
-#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION          (0x05)
-
-/* PhysDiskState defines */
-#define MPI2_RAID_PD_STATE_NOT_CONFIGURED               (0x00)
-#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE               (0x01)
-#define MPI2_RAID_PD_STATE_OFFLINE                      (0x02)
-#define MPI2_RAID_PD_STATE_ONLINE                       (0x03)
-#define MPI2_RAID_PD_STATE_HOT_SPARE                    (0x04)
-#define MPI2_RAID_PD_STATE_DEGRADED                     (0x05)
-#define MPI2_RAID_PD_STATE_REBUILDING                   (0x06)
-#define MPI2_RAID_PD_STATE_OPTIMAL                      (0x07)
-
-/* OfflineReason defines */
-#define MPI2_PHYSDISK0_ONLINE                           (0x00)
-#define MPI2_PHYSDISK0_OFFLINE_MISSING                  (0x01)
-#define MPI2_PHYSDISK0_OFFLINE_FAILED                   (0x03)
-#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING             (0x04)
-#define MPI2_PHYSDISK0_OFFLINE_REQUESTED                (0x05)
-#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED         (0x06)
-#define MPI2_PHYSDISK0_OFFLINE_OTHER                    (0xFF)
-
-/* IncompatibleReason defines */
-#define MPI2_PHYSDISK0_COMPATIBLE                       (0x00)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL            (0x01)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE           (0x02)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA             (0x03)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD   (0x04)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA    (0x05)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE          (0x06)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN             (0xFF)
-
-/* PhysDiskAttributes defines */
-#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK                (0x0C)
-#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE         (0x08)
-#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE           (0x04)
-
-#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK             (0x03)
-#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL              (0x02)
-#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL             (0x01)
-
-/* PhysDiskStatusFlags defines */
-#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED        (0x00000040)
-#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET           (0x00000020)
-#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED  (0x00000010)
-#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS     (0x00000000)
-#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008)
-#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME      (0x00000004)
-#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED             (0x00000002)
-#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC          (0x00000001)
-
-
-/* RAID Physical Disk Page 1 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhysDiskPaths at runtime.
- */
-#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
-#define MPI2_RAID_PHYS_DISK1_PATH_MAX   (1)
-#endif
-
-typedef struct _MPI2_RAIDPHYSDISK1_PATH
-{
-    U16             DevHandle;          /* 0x00 */
-    U16             Reserved1;          /* 0x02 */
-    U64             WWID;               /* 0x04 */
-    U64             OwnerWWID;          /* 0x0C */
-    U8              OwnerIdentifier;    /* 0x14 */
-    U8              Reserved2;          /* 0x15 */
-    U16             Flags;              /* 0x16 */
-} MPI2_RAIDPHYSDISK1_PATH, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK1_PATH,
-  Mpi2RaidPhysDisk1Path_t, MPI2_POINTER pMpi2RaidPhysDisk1Path_t;
-
-/* RAID Physical Disk Page 1 Physical Disk Path Flags field defines */
-#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY        (0x0004)
-#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN         (0x0002)
-#define MPI2_RAID_PHYSDISK1_FLAG_INVALID        (0x0001)
-
-typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1
-{
-    MPI2_CONFIG_PAGE_HEADER         Header;                     /* 0x00 */
-    U8                              NumPhysDiskPaths;           /* 0x04 */
-    U8                              PhysDiskNum;                /* 0x05 */
-    U16                             Reserved1;                  /* 0x06 */
-    U32                             Reserved2;                  /* 0x08 */
-    MPI2_RAIDPHYSDISK1_PATH         PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/* 0x0C */
-} MPI2_CONFIG_PAGE_RD_PDISK_1,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
-  Mpi2RaidPhysDiskPage1_t, MPI2_POINTER pMpi2RaidPhysDiskPage1_t;
-
-#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION          (0x02)
-
-
-/****************************************************************************
-*   values for fields used by several types of SAS Config Pages
-****************************************************************************/
-
-/* values for NegotiatedLinkRates fields */
-#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL             (0xF0)
-#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL            (4)
-#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL            (0x0F)
-/* link rates used for Negotiated Physical and Logical Link Rate */
-#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE        (0x00)
-#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED             (0x01)
-#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED       (0x02)
-#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE        (0x03)
-#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR            (0x04)
-#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS    (0x05)
-#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY          (0x06)
-#define MPI2_SAS_NEG_LINK_RATE_1_5                      (0x08)
-#define MPI2_SAS_NEG_LINK_RATE_3_0                      (0x09)
-#define MPI2_SAS_NEG_LINK_RATE_6_0                      (0x0A)
-
-
-/* values for AttachedPhyInfo fields */
-#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT       (0x00000040)
-#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS        (0x00000020)
-#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE           (0x00000010)
-
-#define MPI2_SAS_APHYINFO_REASON_MASK                   (0x0000000F)
-#define MPI2_SAS_APHYINFO_REASON_UNKNOWN                (0x00000000)
-#define MPI2_SAS_APHYINFO_REASON_POWER_ON               (0x00000001)
-#define MPI2_SAS_APHYINFO_REASON_HARD_RESET             (0x00000002)
-#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL        (0x00000003)
-#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC           (0x00000004)
-#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ       (0x00000005)
-#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER    (0x00000006)
-#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT          (0x00000007)
-#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED       (0x00000008)
-
-
-/* values for PhyInfo fields */
-#define MPI2_SAS_PHYINFO_PHY_VACANT                     (0x80000000)
-
-#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK       (0x18000000)
-#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION      (27)
-#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE               (0x00000000)
-#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL              (0x08000000)
-#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER              (0x10000000)
-
-#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS       (0x04000000)
-#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT        (0x02000000)
-#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS               (0x01000000)
-#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT          (0x00400000)
-#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS                   (0x00200000)
-#define MPI2_SAS_PHYINFO_ZONING_ENABLED                 (0x00100000)
-
-#define MPI2_SAS_PHYINFO_REASON_MASK                    (0x000F0000)
-#define MPI2_SAS_PHYINFO_REASON_UNKNOWN                 (0x00000000)
-#define MPI2_SAS_PHYINFO_REASON_POWER_ON                (0x00010000)
-#define MPI2_SAS_PHYINFO_REASON_HARD_RESET              (0x00020000)
-#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL         (0x00030000)
-#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC            (0x00040000)
-#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ        (0x00050000)
-#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER     (0x00060000)
-#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT           (0x00070000)
-#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED        (0x00080000)
-
-#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED         (0x00008000)
-#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE               (0x00004000)
-#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT     (0x00002000)
-#define MPI2_SAS_PHYINFO_VIRTUAL_PHY                    (0x00001000)
-
-#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME      (0x00000F00)
-#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME     (8)
-
-#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE         (0x000000F0)
-#define MPI2_SAS_PHYINFO_DIRECT_ROUTING                 (0x00000000)
-#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING            (0x00000010)
-#define MPI2_SAS_PHYINFO_TABLE_ROUTING                  (0x00000020)
-
-
-/* values for SAS ProgrammedLinkRate fields */
-#define MPI2_SAS_PRATE_MAX_RATE_MASK                    (0xF0)
-#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE        (0x00)
-#define MPI2_SAS_PRATE_MAX_RATE_1_5                     (0x80)
-#define MPI2_SAS_PRATE_MAX_RATE_3_0                     (0x90)
-#define MPI2_SAS_PRATE_MAX_RATE_6_0                     (0xA0)
-#define MPI25_SAS_PRATE_MAX_RATE_12_0                   (0xB0)
-#define MPI2_SAS_PRATE_MIN_RATE_MASK                    (0x0F)
-#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE        (0x00)
-#define MPI2_SAS_PRATE_MIN_RATE_1_5                     (0x08)
-#define MPI2_SAS_PRATE_MIN_RATE_3_0                     (0x09)
-#define MPI2_SAS_PRATE_MIN_RATE_6_0                     (0x0A)
-
-
-/* values for SAS HwLinkRate fields */
-#define MPI2_SAS_HWRATE_MAX_RATE_MASK                   (0xF0)
-#define MPI2_SAS_HWRATE_MAX_RATE_1_5                    (0x80)
-#define MPI2_SAS_HWRATE_MAX_RATE_3_0                    (0x90)
-#define MPI2_SAS_HWRATE_MAX_RATE_6_0                    (0xA0)
-#define MPI25_SAS_HWRATE_MAX_RATE_12_0                  (0xB0)
-#define MPI2_SAS_HWRATE_MIN_RATE_MASK                   (0x0F)
-#define MPI2_SAS_HWRATE_MIN_RATE_1_5                    (0x08)
-#define MPI2_SAS_HWRATE_MIN_RATE_3_0                    (0x09)
-#define MPI2_SAS_HWRATE_MIN_RATE_6_0                    (0x0A)
-
-
-
-/****************************************************************************
-*   SAS IO Unit Config Pages
-****************************************************************************/
-
-/* SAS IO Unit Page 0 */
-
-typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA
-{
-    U8          Port;                   /* 0x00 */
-    U8          PortFlags;              /* 0x01 */
-    U8          PhyFlags;               /* 0x02 */
-    U8          NegotiatedLinkRate;     /* 0x03 */
-    U32         ControllerPhyDeviceInfo;/* 0x04 */
-    U16         AttachedDevHandle;      /* 0x08 */
-    U16         ControllerDevHandle;    /* 0x0A */
-    U32         DiscoveryStatus;        /* 0x0C */
-    U32         Reserved;               /* 0x10 */
-} MPI2_SAS_IO_UNIT0_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT0_PHY_DATA,
-  Mpi2SasIOUnit0PhyData_t, MPI2_POINTER pMpi2SasIOUnit0PhyData_t;
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT0_PHY_MAX
-#define MPI2_SAS_IOUNIT0_PHY_MAX        (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                             /* 0x00 */
-    U32                                 Reserved1;                          /* 0x08 */
-    U8                                  NumPhys;                            /* 0x0C */
-    U8                                  Reserved2;                          /* 0x0D */
-    U16                                 Reserved3;                          /* 0x0E */
-    MPI2_SAS_IO_UNIT0_PHY_DATA          PhyData[MPI2_SAS_IOUNIT0_PHY_MAX];  /* 0x10 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_0,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0,
-  Mpi2SasIOUnitPage0_t, MPI2_POINTER pMpi2SasIOUnitPage0_t;
-
-#define MPI2_SASIOUNITPAGE0_PAGEVERSION                     (0x05)
-
-/* values for SAS IO Unit Page 0 PortFlags */
-#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS     (0x08)
-#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG          (0x01)
-
-/* values for SAS IO Unit Page 0 PhyFlags */
-#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED             (0x10)
-#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED               (0x08)
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
-
-/* see mpi2_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
-
-/* values for SAS IO Unit Page 0 DiscoveryStatus */
-#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED            (0x80000000)
-#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED             (0x40000000)
-#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED               (0x20000000)
-#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED             (0x10000000)
-#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR             (0x08000000)
-#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE    (0x00008000)
-#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE            (0x00004000)
-#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN                (0x00002000)
-#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK        (0x00001000)
-#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE               (0x00000800)
-#define MPI2_SASIOUNIT0_DS_TABLE_LINK                       (0x00000400)
-#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK                 (0x00000200)
-#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR                    (0x00000100)
-#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED              (0x00000080)
-#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST                  (0x00000040)
-#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES                (0x00000020)
-#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT                      (0x00000010)
-#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS                   (0x00000004)
-#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE             (0x00000002)
-#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED                    (0x00000001)
-
-
-/* SAS IO Unit Page 1 */
-
-typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA
-{
-    U8          Port;                       /* 0x00 */
-    U8          PortFlags;                  /* 0x01 */
-    U8          PhyFlags;                   /* 0x02 */
-    U8          MaxMinLinkRate;             /* 0x03 */
-    U32         ControllerPhyDeviceInfo;    /* 0x04 */
-    U16         MaxTargetPortConnectTime;   /* 0x08 */
-    U16         Reserved1;                  /* 0x0A */
-} MPI2_SAS_IO_UNIT1_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT1_PHY_DATA,
-  Mpi2SasIOUnit1PhyData_t, MPI2_POINTER pMpi2SasIOUnit1PhyData_t;
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT1_PHY_MAX
-#define MPI2_SAS_IOUNIT1_PHY_MAX        (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                             /* 0x00 */
-    U16                                 ControlFlags;                       /* 0x08 */
-    U16                                 SASNarrowMaxQueueDepth;             /* 0x0A */
-    U16                                 AdditionalControlFlags;             /* 0x0C */
-    U16                                 SASWideMaxQueueDepth;               /* 0x0E */
-    U8                                  NumPhys;                            /* 0x10 */
-    U8                                  SATAMaxQDepth;                      /* 0x11 */
-    U8                                  ReportDeviceMissingDelay;           /* 0x12 */
-    U8                                  IODeviceMissingDelay;               /* 0x13 */
-    MPI2_SAS_IO_UNIT1_PHY_DATA          PhyData[MPI2_SAS_IOUNIT1_PHY_MAX];  /* 0x14 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_1,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1,
-  Mpi2SasIOUnitPage1_t, MPI2_POINTER pMpi2SasIOUnitPage1_t;
-
-#define MPI2_SASIOUNITPAGE1_PAGEVERSION     (0x09)
-
-/* values for SAS IO Unit Page 1 ControlFlags */
-#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST                    (0x8000)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX                        (0x4000)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX                        (0x2000)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE                    (0x1000)
-
-#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT                    (0x0600)
-#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT                   (9)
-#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH                    (0x0)
-#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT                     (0x1)
-#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT                    (0x2)
-
-#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED             (0x0080)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED                 (0x0040)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED                   (0x0020)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED                   (0x0010)
-#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL           (0x0008)
-#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL                 (0x0004)
-#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY                 (0x0002)
-#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION                   (0x0001)
-
-/* values for SAS IO Unit Page 1 AdditionalControlFlags */
-#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL          (0x0080)
-#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION    (0x0040)
-#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION        (0x0020)
-#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET   (0x0010)
-#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET  (0x0008)
-#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET   (0x0004)
-#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET     (0x0002)
-#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE               (0x0001)
-
-/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
-#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK                 (0x7F)
-#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16                      (0x80)
-
-/* values for SAS IO Unit Page 1 PortFlags */
-#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG                 (0x01)
-
-/* values for SAS IO Unit Page 1 PhyFlags */
-#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE                      (0x10)
-#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE                        (0x08)
-
-/* values for SAS IO Unit Page 1 MaxMinLinkRate */
-#define MPI2_SASIOUNIT1_MAX_RATE_MASK                               (0xF0)
-#define MPI2_SASIOUNIT1_MAX_RATE_1_5                                (0x80)
-#define MPI2_SASIOUNIT1_MAX_RATE_3_0                                (0x90)
-#define MPI2_SASIOUNIT1_MAX_RATE_6_0                                (0xA0)
-#define MPI2_SASIOUNIT1_MIN_RATE_MASK                               (0x0F)
-#define MPI2_SASIOUNIT1_MIN_RATE_1_5                                (0x08)
-#define MPI2_SASIOUNIT1_MIN_RATE_3_0                                (0x09)
-#define MPI2_SASIOUNIT1_MIN_RATE_6_0                                (0x0A)
-
-/* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
-
-
-/* SAS IO Unit Page 4 */
-
-typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP
-{
-    U8          MaxTargetSpinup;            /* 0x00 */
-    U8          SpinupDelay;                /* 0x01 */
-	U8          SpinupFlags;                /* 0x02 */
-	U8          Reserved1;                  /* 0x03 */
-} MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP,
-  Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t;
-
-/* defines for SAS IO Unit Page 4 SpinupFlags */
-#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG         (0x01)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT4_PHY_MAX
-#define MPI2_SAS_IOUNIT4_PHY_MAX        (4)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                         /* 0x00 */
-    MPI2_SAS_IOUNIT4_SPINUP_GROUP       SpinupGroupParameters[4];       /* 0x08 */
-    U32                                 Reserved1;                      /* 0x18 */
-    U32                                 Reserved2;                      /* 0x1C */
-    U32                                 Reserved3;                      /* 0x20 */
-    U8                                  BootDeviceWaitTime;             /* 0x24 */
-    U8                                  Reserved4;                      /* 0x25 */
-    U16                                 Reserved5;                      /* 0x26 */
-    U8                                  NumPhys;                        /* 0x28 */
-    U8                                  PEInitialSpinupDelay;           /* 0x29 */
-    U8                                  PEReplyDelay;                   /* 0x2A */
-    U8                                  Flags;                          /* 0x2B */
-    U8                                  PHY[MPI2_SAS_IOUNIT4_PHY_MAX];  /* 0x2C */
-} MPI2_CONFIG_PAGE_SASIOUNIT_4,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4,
-  Mpi2SasIOUnitPage4_t, MPI2_POINTER pMpi2SasIOUnitPage4_t;
-
-#define MPI2_SASIOUNITPAGE4_PAGEVERSION     (0x02)
-
-/* defines for Flags field */
-#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE               (0x01)
-
-/* defines for PHY field */
-#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK               (0x03)
-
-
-/* SAS IO Unit Page 5 */
-
-typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
-    U8          ControlFlags;               /* 0x00 */
-    U8          PortWidthModGroup;          /* 0x01 */
-    U16         InactivityTimerExponent;    /* 0x02 */
-    U8          SATAPartialTimeout;         /* 0x04 */
-    U8          Reserved2;                  /* 0x05 */
-    U8          SATASlumberTimeout;         /* 0x06 */
-    U8          Reserved3;                  /* 0x07 */
-    U8          SASPartialTimeout;          /* 0x08 */
-    U8          Reserved4;                  /* 0x09 */
-    U8          SASSlumberTimeout;          /* 0x0A */
-    U8          Reserved5;                  /* 0x0B */
-} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
-  MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
-  Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t;
-
-/* defines for ControlFlags field */
-#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE      (0x08)
-#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE      (0x04)
-#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE     (0x02)
-#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE     (0x01)
-
-/* defines for PortWidthModeGroup field */
-#define MPI2_SASIOUNIT5_PWMG_DISABLE                    (0xFF)
-
-/* defines for InactivityTimerExponent field */
-#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER            (0x7000)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER           (12)
-#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL            (0x0700)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL           (8)
-#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER           (0x0070)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER          (4)
-#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL           (0x0007)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL          (0)
-
-#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS                 (7)
-#define MPI2_SASIOUNIT5_ITE_ONE_SECOND                  (6)
-#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS        (5)
-#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS            (4)
-#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND             (3)
-#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS        (2)
-#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS            (1)
-#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND             (0)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
-#define MPI2_SAS_IOUNIT5_PHY_MAX        (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;		/* 0x00 */
-    U8                                  NumPhys;	/* 0x08 */
-    U8                                  Reserved1;	/* 0x09 */
-    U16                                 Reserved2;	/* 0x0A */
-    U32                                 Reserved3;	/* 0x0C */
-    MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS   SASPhyPowerManagementSettings
-					[MPI2_SAS_IOUNIT5_PHY_MAX];  /* 0x10 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_5,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
-  Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t;
-
-#define MPI2_SASIOUNITPAGE5_PAGEVERSION     (0x01)
-
-
-/* SAS IO Unit Page 6 */
-
-typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
-    U8          CurrentStatus;              /* 0x00 */
-    U8          CurrentModulation;          /* 0x01 */
-    U8          CurrentUtilization;         /* 0x02 */
-    U8          Reserved1;                  /* 0x03 */
-    U32         Reserved2;                  /* 0x04 */
-} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
-  MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
-  Mpi2SasIOUnit6PortWidthModGroupStatus_t,
-  MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t;
-
-/* defines for CurrentStatus field */
-#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE                      (0x00)
-#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED                     (0x01)
-#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG                   (0x02)
-#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN                        (0x03)
-#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY                 (0x04)
-#define MPI2_SASIOUNIT6_STATUS_INACTIVE                         (0x05)
-#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT                    (0x06)
-#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST                      (0x07)
-
-/* defines for CurrentModulation field */
-#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT                   (0x00)
-#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT                   (0x01)
-#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT                   (0x02)
-#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT                  (0x03)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumGroups at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
-#define MPI2_SAS_IOUNIT6_GROUP_MAX      (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    U32                                 Reserved1;                  /* 0x08 */
-    U32                                 Reserved2;                  /* 0x0C */
-    U8                                  NumGroups;                  /* 0x10 */
-    U8                                  Reserved3;                  /* 0x11 */
-    U16                                 Reserved4;                  /* 0x12 */
-    MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
-	PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_6,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
-  Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t;
-
-#define MPI2_SASIOUNITPAGE6_PAGEVERSION     (0x00)
-
-
-/* SAS IO Unit Page 7 */
-
-typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
-    U8          Flags;                      /* 0x00 */
-    U8          Reserved1;                  /* 0x01 */
-    U16         Reserved2;                  /* 0x02 */
-    U8          Threshold75Pct;             /* 0x04 */
-    U8          Threshold50Pct;             /* 0x05 */
-    U8          Threshold25Pct;             /* 0x06 */
-    U8          Reserved3;                  /* 0x07 */
-} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
-  MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
-  Mpi2SasIOUnit7PortWidthModGroupSettings_t,
-  MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t;
-
-/* defines for Flags field */
-#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION  (0x01)
-
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumGroups at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
-#define MPI2_SAS_IOUNIT7_GROUP_MAX      (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER            Header;             /* 0x00 */
-    U8                                          SamplingInterval;   /* 0x08 */
-    U8                                          WindowLength;       /* 0x09 */
-    U16                                         Reserved1;          /* 0x0A */
-    U32                                         Reserved2;          /* 0x0C */
-    U32                                         Reserved3;          /* 0x10 */
-    U8                                          NumGroups;          /* 0x14 */
-    U8                                          Reserved4;          /* 0x15 */
-    U16                                         Reserved5;          /* 0x16 */
-    MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
-	PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_7,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
-  Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t;
-
-#define MPI2_SASIOUNITPAGE7_PAGEVERSION     (0x00)
-
-
-/* SAS IO Unit Page 8 */
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;			/* 0x00 */
-    U32                                 Reserved1;		/* 0x08 */
-    U32                                 PowerManagementCapabilities;/* 0x0C */
-    U32                                 Reserved2;		/* 0x10 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_8,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
-  Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t;
-
-#define MPI2_SASIOUNITPAGE8_PAGEVERSION     (0x00)
-
-/* defines for PowerManagementCapabilities field */
-#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD          (0x00001000)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE        (0x00000800)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE        (0x00000400)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE       (0x00000200)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE       (0x00000100)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD        (0x00000010)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE      (0x00000008)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE      (0x00000004)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE     (0x00000002)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE     (0x00000001)
-
-
-
-/* SAS IO Unit Page 16 */
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 {
-	MPI2_CONFIG_EXTENDED_PAGE_HEADER  Header;                  /* 0x00 */
-	U64                         TimeStamp;                     /* 0x08 */
-	U32                         Reserved1;                     /* 0x10 */
-	U32                         Reserved2;                     /* 0x14 */
-	U32                         FastPathPendedRequests;        /* 0x18 */
-	U32                         FastPathUnPendedRequests;      /* 0x1C */
-	U32                         FastPathHostRequestStarts;     /* 0x20 */
-	U32                         FastPathFirmwareRequestStarts; /* 0x24 */
-	U32                         FastPathHostCompletions;       /* 0x28 */
-	U32                         FastPathFirmwareCompletions;   /* 0x2C */
-	U32                         NonFastPathRequestStarts;      /* 0x30 */
-	U32			    NonFastPathHostCompletions;    /* 0x30 */
-} MPI2_CONFIG_PAGE_SASIOUNIT16,
-MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT16,
-Mpi2SasIOUnitPage16_t, MPI2_POINTER pMpi2SasIOUnitPage16_t;
-
-#define MPI2_SASIOUNITPAGE16_PAGEVERSION    (0x00)
-
-
-/****************************************************************************
-*   SAS Expander Config Pages
-****************************************************************************/
-
-/* SAS Expander Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    U8                                  PhysicalPort;               /* 0x08 */
-    U8                                  ReportGenLength;            /* 0x09 */
-    U16                                 EnclosureHandle;            /* 0x0A */
-    U64                                 SASAddress;                 /* 0x0C */
-    U32                                 DiscoveryStatus;            /* 0x14 */
-    U16                                 DevHandle;                  /* 0x18 */
-    U16                                 ParentDevHandle;            /* 0x1A */
-    U16                                 ExpanderChangeCount;        /* 0x1C */
-    U16                                 ExpanderRouteIndexes;       /* 0x1E */
-    U8                                  NumPhys;                    /* 0x20 */
-    U8                                  SASLevel;                   /* 0x21 */
-    U16                                 Flags;                      /* 0x22 */
-    U16                                 STPBusInactivityTimeLimit;  /* 0x24 */
-    U16                                 STPMaxConnectTimeLimit;     /* 0x26 */
-    U16                                 STP_SMP_NexusLossTime;      /* 0x28 */
-    U16                                 MaxNumRoutedSasAddresses;   /* 0x2A */
-    U64                                 ActiveZoneManagerSASAddress;/* 0x2C */
-    U16                                 ZoneLockInactivityLimit;    /* 0x34 */
-    U16                                 Reserved1;                  /* 0x36 */
-    U8                                  TimeToReducedFunc;          /* 0x38 */
-    U8                                  InitialTimeToReducedFunc;   /* 0x39 */
-    U8                                  MaxReducedFuncTime;         /* 0x3A */
-    U8                                  Reserved2;                  /* 0x3B */
-} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
-  Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t;
-
-#define MPI2_SASEXPANDER0_PAGEVERSION       (0x06)
-
-/* values for SAS Expander Page 0 DiscoveryStatus field */
-#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED         (0x80000000)
-#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED          (0x40000000)
-#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED            (0x20000000)
-#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED          (0x10000000)
-#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR          (0x08000000)
-#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
-#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE         (0x00004000)
-#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN             (0x00002000)
-#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK     (0x00001000)
-#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE            (0x00000800)
-#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK                    (0x00000400)
-#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK              (0x00000200)
-#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR                 (0x00000100)
-#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED           (0x00000080)
-#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST               (0x00000040)
-#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES             (0x00000020)
-#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT                   (0x00000010)
-#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS                (0x00000004)
-#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE          (0x00000002)
-#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED                 (0x00000001)
-
-/* values for SAS Expander Page 0 Flags field */
-#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY      (0x2000)
-#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED                (0x1000)
-#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES    (0x0800)
-#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES     (0x0400)
-#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT             (0x0200)
-#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING             (0x0100)
-#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT     (0x0080)
-#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE       (0x0010)
-#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG              (0x0004)
-#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS         (0x0002)
-#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG         (0x0001)
-
-
-/* SAS Expander Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    U8                                  PhysicalPort;               /* 0x08 */
-    U8                                  Reserved1;                  /* 0x09 */
-    U16                                 Reserved2;                  /* 0x0A */
-    U8                                  NumPhys;                    /* 0x0C */
-    U8                                  Phy;                        /* 0x0D */
-    U16                                 NumTableEntriesProgrammed;  /* 0x0E */
-    U8                                  ProgrammedLinkRate;         /* 0x10 */
-    U8                                  HwLinkRate;                 /* 0x11 */
-    U16                                 AttachedDevHandle;          /* 0x12 */
-    U32                                 PhyInfo;                    /* 0x14 */
-    U32                                 AttachedDeviceInfo;         /* 0x18 */
-    U16                                 ExpanderDevHandle;          /* 0x1C */
-    U8                                  ChangeCount;                /* 0x1E */
-    U8                                  NegotiatedLinkRate;         /* 0x1F */
-    U8                                  PhyIdentifier;              /* 0x20 */
-    U8                                  AttachedPhyIdentifier;      /* 0x21 */
-    U8                                  Reserved3;                  /* 0x22 */
-    U8                                  DiscoveryInfo;              /* 0x23 */
-    U32                                 AttachedPhyInfo;            /* 0x24 */
-    U8                                  ZoneGroup;                  /* 0x28 */
-    U8                                  SelfConfigStatus;           /* 0x29 */
-    U16                                 Reserved4;                  /* 0x2A */
-} MPI2_CONFIG_PAGE_EXPANDER_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_1,
-  Mpi2ExpanderPage1_t, MPI2_POINTER pMpi2ExpanderPage1_t;
-
-#define MPI2_SASEXPANDER1_PAGEVERSION       (0x02)
-
-/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
-
-/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
-
-/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */
-
-/* see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines used for the AttachedDeviceInfo field */
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
-
-/* values for SAS Expander Page 1 DiscoveryInfo field */
-#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED    (0x04)
-#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE  (0x02)
-#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES  (0x01)
-
-/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
-
-/****************************************************************************
-*   SAS Device Config Pages
-****************************************************************************/
-
-/* SAS Device Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
-    U16                                 Slot;                   /* 0x08 */
-    U16                                 EnclosureHandle;        /* 0x0A */
-    U64                                 SASAddress;             /* 0x0C */
-    U16                                 ParentDevHandle;        /* 0x14 */
-    U8                                  PhyNum;                 /* 0x16 */
-    U8                                  AccessStatus;           /* 0x17 */
-    U16                                 DevHandle;              /* 0x18 */
-    U8                                  AttachedPhyIdentifier;  /* 0x1A */
-    U8                                  ZoneGroup;              /* 0x1B */
-    U32                                 DeviceInfo;             /* 0x1C */
-    U16                                 Flags;                  /* 0x20 */
-    U8                                  PhysicalPort;           /* 0x22 */
-    U8                                  MaxPortConnections;     /* 0x23 */
-    U64                                 DeviceName;             /* 0x24 */
-    U8                                  PortGroups;             /* 0x2C */
-    U8                                  DmaGroup;               /* 0x2D */
-    U8                                  ControlGroup;           /* 0x2E */
-	U8				 EnclosureLevel;	 /* 0x2F */
-	U8				 ConnectorName[4];	 /* 0x30 */
-    U32                                 Reserved3;              /* 0x34 */
-} MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
-  Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t;
-
-#define MPI2_SASDEVICE0_PAGEVERSION         (0x09)
-
-/* values for SAS Device Page 0 AccessStatus field */
-#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS                  (0x00)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED           (0x01)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED     (0x02)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT  (0x03)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION  (0x04)
-#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE      (0x05)
-#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE  (0x06)
-#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED             (0x07)
-/* specific values for SATA Init failures */
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN                (0x10)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT   (0x11)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG                   (0x12)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION         (0x13)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER            (0x14)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN                 (0x15)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN                (0x16)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN                (0x17)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION       (0x18)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE        (0x19)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX                    (0x1F)
-
-/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
-
-/* values for SAS Device Page 0 Flags field */
-#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE          (0x8000)
-#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE           (0x1000)
-#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE           (0x0800)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY     (0x0400)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE             (0x0200)
-#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE           (0x0100)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED     (0x0080)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED         (0x0040)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED           (0x0020)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED           (0x0010)
-#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH         (0x0008)
-#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID             (0x0002)
-#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT               (0x0001)
-
-
-/* SAS Device Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
-    U32                                 Reserved1;              /* 0x08 */
-    U64                                 SASAddress;             /* 0x0C */
-    U32                                 Reserved2;              /* 0x14 */
-    U16                                 DevHandle;              /* 0x18 */
-    U16                                 Reserved3;              /* 0x1A */
-    U8                                  InitialRegDeviceFIS[20];/* 0x1C */
-} MPI2_CONFIG_PAGE_SAS_DEV_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_1,
-  Mpi2SasDevicePage1_t, MPI2_POINTER pMpi2SasDevicePage1_t;
-
-#define MPI2_SASDEVICE1_PAGEVERSION         (0x01)
-
-
-/****************************************************************************
-*   SAS PHY Config Pages
-****************************************************************************/
-
-/* SAS PHY Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
-    U16                                 OwnerDevHandle;         /* 0x08 */
-    U16                                 Reserved1;              /* 0x0A */
-    U16                                 AttachedDevHandle;      /* 0x0C */
-    U8                                  AttachedPhyIdentifier;  /* 0x0E */
-    U8                                  Reserved2;              /* 0x0F */
-    U32                                 AttachedPhyInfo;        /* 0x10 */
-    U8                                  ProgrammedLinkRate;     /* 0x14 */
-    U8                                  HwLinkRate;             /* 0x15 */
-    U8                                  ChangeCount;            /* 0x16 */
-    U8                                  Flags;                  /* 0x17 */
-    U32                                 PhyInfo;                /* 0x18 */
-    U8                                  NegotiatedLinkRate;     /* 0x1C */
-    U8                                  Reserved3;              /* 0x1D */
-    U16                                 Reserved4;              /* 0x1E */
-} MPI2_CONFIG_PAGE_SAS_PHY_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_0,
-  Mpi2SasPhyPage0_t, MPI2_POINTER pMpi2SasPhyPage0_t;
-
-#define MPI2_SASPHY0_PAGEVERSION            (0x03)
-
-/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
-
-/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
-
-/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
-
-/* values for SAS PHY Page 0 Flags field */
-#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC             (0x01)
-
-/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
-
-
-/* SAS PHY Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    U32                                 Reserved1;                  /* 0x08 */
-    U32                                 InvalidDwordCount;          /* 0x0C */
-    U32                                 RunningDisparityErrorCount; /* 0x10 */
-    U32                                 LossDwordSynchCount;        /* 0x14 */
-    U32                                 PhyResetProblemCount;       /* 0x18 */
-} MPI2_CONFIG_PAGE_SAS_PHY_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_1,
-  Mpi2SasPhyPage1_t, MPI2_POINTER pMpi2SasPhyPage1_t;
-
-#define MPI2_SASPHY1_PAGEVERSION            (0x01)
-
-
-/* SAS PHY Page 2 */
-
-typedef struct _MPI2_SASPHY2_PHY_EVENT {
-    U8          PhyEventCode;       /* 0x00 */
-    U8          Reserved1;          /* 0x01 */
-    U16         Reserved2;          /* 0x02 */
-    U32         PhyEventInfo;       /* 0x04 */
-} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT,
-  Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t;
-
-/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
-
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhyEvents at runtime.
- */
-#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
-#define MPI2_SASPHY2_PHY_EVENT_MAX      (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    U32                                 Reserved1;                  /* 0x08 */
-    U8                                  NumPhyEvents;               /* 0x0C */
-    U8                                  Reserved2;                  /* 0x0D */
-    U16                                 Reserved3;                  /* 0x0E */
-    MPI2_SASPHY2_PHY_EVENT              PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX];
-								/* 0x10 */
-} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
-  Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t;
-
-#define MPI2_SASPHY2_PAGEVERSION            (0x00)
-
-
-/* SAS PHY Page 3 */
-
-typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
-    U8          PhyEventCode;       /* 0x00 */
-    U8          Reserved1;          /* 0x01 */
-    U16         Reserved2;          /* 0x02 */
-    U8          CounterType;        /* 0x04 */
-    U8          ThresholdWindow;    /* 0x05 */
-    U8          TimeUnits;          /* 0x06 */
-    U8          Reserved3;          /* 0x07 */
-    U32         EventThreshold;     /* 0x08 */
-    U16         ThresholdFlags;     /* 0x0C */
-    U16         Reserved4;          /* 0x0E */
-} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
-  Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t;
-
-/* values for PhyEventCode field */
-#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT                    (0x00)
-#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD               (0x01)
-#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR     (0x02)
-#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC             (0x03)
-#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM           (0x04)
-#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW     (0x05)
-#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR                    (0x06)
-#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR         (0x20)
-#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT           (0x21)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT           (0x22)
-#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT           (0x23)
-#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT           (0x24)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON   (0x25)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON   (0x26)
-#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK                    (0x27)
-#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK                    (0x28)
-#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT               (0x29)
-#define MPI2_SASPHY3_EVENT_CODE_CONNECTION                  (0x2A)
-#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED      (0x2B)
-#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME        (0x2C)
-#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME          (0x2D)
-#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME           (0x2E)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES               (0x40)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES               (0x41)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES         (0x42)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES         (0x43)
-#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED           (0x44)
-#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED           (0x45)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES              (0x50)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES              (0x51)
-#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW               (0x52)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES               (0x60)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES               (0x61)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES         (0x63)
-#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT             (0xD0)
-#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE    (0xD1)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AIP                      (0xD2)
-
-/* values for the CounterType field */
-#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING                  (0x00)
-#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING                (0x01)
-#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE                (0x02)
-
-/* values for the TimeUnits field */
-#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS             (0x00)
-#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS            (0x01)
-#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND               (0x02)
-#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS             (0x03)
-
-/* values for the ThresholdFlags field */
-#define MPI2_SASPHY3_TFLAGS_PHY_RESET                       (0x0002)
-#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY                    (0x0001)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhyEvents at runtime.
- */
-#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
-#define MPI2_SASPHY3_PHY_EVENT_MAX      (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    U32                                 Reserved1;                  /* 0x08 */
-    U8                                  NumPhyEvents;               /* 0x0C */
-    U8                                  Reserved2;                  /* 0x0D */
-    U16                                 Reserved3;                  /* 0x0E */
-    MPI2_SASPHY3_PHY_EVENT_CONFIG       PhyEventConfig
-					[MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */
-} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
-  Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t;
-
-#define MPI2_SASPHY3_PAGEVERSION            (0x00)
-
-
-/* SAS PHY Page 4 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 {
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    U16                                 Reserved1;                  /* 0x08 */
-    U8                                  Reserved2;                  /* 0x0A */
-    U8                                  Flags;                      /* 0x0B */
-    U8                                  InitialFrame[28];           /* 0x0C */
-} MPI2_CONFIG_PAGE_SAS_PHY_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
-  Mpi2SasPhyPage4_t, MPI2_POINTER pMpi2SasPhyPage4_t;
-
-#define MPI2_SASPHY4_PAGEVERSION            (0x00)
-
-/* values for the Flags field */
-#define MPI2_SASPHY4_FLAGS_FRAME_VALID        (0x02)
-#define MPI2_SASPHY4_FLAGS_SATA_FRAME         (0x01)
-
-
-
-
-/****************************************************************************
-*   SAS Port Config Pages
-****************************************************************************/
-
-/* SAS Port Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    U8                                  PortNumber;                 /* 0x08 */
-    U8                                  PhysicalPort;               /* 0x09 */
-    U8                                  PortWidth;                  /* 0x0A */
-    U8                                  PhysicalPortWidth;          /* 0x0B */
-    U8                                  ZoneGroup;                  /* 0x0C */
-    U8                                  Reserved1;                  /* 0x0D */
-    U16                                 Reserved2;                  /* 0x0E */
-    U64                                 SASAddress;                 /* 0x10 */
-    U32                                 DeviceInfo;                 /* 0x18 */
-    U32                                 Reserved3;                  /* 0x1C */
-    U32                                 Reserved4;                  /* 0x20 */
-} MPI2_CONFIG_PAGE_SAS_PORT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PORT_0,
-  Mpi2SasPortPage0_t, MPI2_POINTER pMpi2SasPortPage0_t;
-
-#define MPI2_SASPORT0_PAGEVERSION           (0x00)
-
-/* see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */
-
-
-/****************************************************************************
-*   SAS Enclosure Config Pages
-****************************************************************************/
-
-/* SAS Enclosure Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    U32                                 Reserved1;                  /* 0x08 */
-    U64                                 EnclosureLogicalID;         /* 0x0C */
-    U16                                 Flags;                      /* 0x14 */
-    U16                                 EnclosureHandle;            /* 0x16 */
-    U16                                 NumSlots;                   /* 0x18 */
-    U16                                 StartSlot;                  /* 0x1A */
-	U8				 Reserved2;		     /* 0x1C */
-	U8				 EnclosureLevel;	     /* 0x1D */
-    U16                                 SEPDevHandle;               /* 0x1E */
-    U32                                 Reserved3;                  /* 0x20 */
-    U32                                 Reserved4;                  /* 0x24 */
-} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
-  Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t;
-
-#define MPI2_SASENCLOSURE0_PAGEVERSION      (0x04)
-
-/* values for SAS Enclosure Page 0 Flags field */
-#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID      (0x0010)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK              (0x000F)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN           (0x0000)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES           (0x0001)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO         (0x0002)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO         (0x0003)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE     (0x0004)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO          (0x0005)
-
-
-/****************************************************************************
-*   Log Config Page
-****************************************************************************/
-
-/* Log Page 0 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumLogEntries at runtime.
- */
-#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
-#define MPI2_LOG_0_NUM_LOG_ENTRIES          (1)
-#endif
-
-#define MPI2_LOG_0_LOG_DATA_LENGTH          (0x1C)
-
-typedef struct _MPI2_LOG_0_ENTRY
-{
-    U64         TimeStamp;                          /* 0x00 */
-    U32         Reserved1;                          /* 0x08 */
-    U16         LogSequence;                        /* 0x0C */
-    U16         LogEntryQualifier;                  /* 0x0E */
-    U8          VP_ID;                              /* 0x10 */
-    U8          VF_ID;                              /* 0x11 */
-    U16         Reserved2;                          /* 0x12 */
-    U8          LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/* 0x14 */
-} MPI2_LOG_0_ENTRY, MPI2_POINTER PTR_MPI2_LOG_0_ENTRY,
-  Mpi2Log0Entry_t, MPI2_POINTER pMpi2Log0Entry_t;
-
-/* values for Log Page 0 LogEntry LogEntryQualifier field */
-#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED          (0x0000)
-#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET        (0x0001)
-#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE      (0x0002)
-#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC    (0x8000)
-#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC    (0xFFFF)
-
-typedef struct _MPI2_CONFIG_PAGE_LOG_0
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    U32                                 Reserved1;                  /* 0x08 */
-    U32                                 Reserved2;                  /* 0x0C */
-    U16                                 NumLogEntries;              /* 0x10 */
-    U16                                 Reserved3;                  /* 0x12 */
-    MPI2_LOG_0_ENTRY                    LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /* 0x14 */
-} MPI2_CONFIG_PAGE_LOG_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_LOG_0,
-  Mpi2LogPage0_t, MPI2_POINTER pMpi2LogPage0_t;
-
-#define MPI2_LOG_0_PAGEVERSION              (0x02)
-
-
-/****************************************************************************
-*   RAID Config Page
-****************************************************************************/
-
-/* RAID Page 0 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumElements at runtime.
- */
-#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
-#define MPI2_RAIDCONFIG0_MAX_ELEMENTS       (1)
-#endif
-
-typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT
-{
-    U16                     ElementFlags;               /* 0x00 */
-    U16                     VolDevHandle;               /* 0x02 */
-    U8                      HotSparePool;               /* 0x04 */
-    U8                      PhysDiskNum;                /* 0x05 */
-    U16                     PhysDiskDevHandle;          /* 0x06 */
-} MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
-  MPI2_POINTER PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
-  Mpi2RaidConfig0ConfigElement_t, MPI2_POINTER pMpi2RaidConfig0ConfigElement_t;
-
-/* values for the ElementFlags field */
-#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE       (0x000F)
-#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT          (0x0000)
-#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT   (0x0001)
-#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT       (0x0002)
-#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT             (0x0003)
-
-
-typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    U8                                  NumHotSpares;               /* 0x08 */
-    U8                                  NumPhysDisks;               /* 0x09 */
-    U8                                  NumVolumes;                 /* 0x0A */
-    U8                                  ConfigNum;                  /* 0x0B */
-    U32                                 Flags;                      /* 0x0C */
-    U8                                  ConfigGUID[24];             /* 0x10 */
-    U32                                 Reserved1;                  /* 0x28 */
-    U8                                  NumElements;                /* 0x2C */
-    U8                                  Reserved2;                  /* 0x2D */
-    U16                                 Reserved3;                  /* 0x2E */
-    MPI2_RAIDCONFIG0_CONFIG_ELEMENT     ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /* 0x30 */
-} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
-  Mpi2RaidConfigurationPage0_t, MPI2_POINTER pMpi2RaidConfigurationPage0_t;
-
-#define MPI2_RAIDCONFIG0_PAGEVERSION            (0x00)
-
-/* values for RAID Configuration Page 0 Flags field */
-#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG        (0x00000001)
-
-
-/****************************************************************************
-*   Driver Persistent Mapping Config Pages
-****************************************************************************/
-
-/* Driver Persistent Mapping Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY
-{
-    U64                                 PhysicalIdentifier;         /* 0x00 */
-    U16                                 MappingInformation;         /* 0x08 */
-    U16                                 DeviceIndex;                /* 0x0A */
-    U32                                 PhysicalBitsMapping;        /* 0x0C */
-    U32                                 Reserved1;                  /* 0x10 */
-} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
-  Mpi2DriverMap0Entry_t, MPI2_POINTER pMpi2DriverMap0Entry_t;
-
-typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0
-{
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                     /* 0x00 */
-    MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY  Entry;                      /* 0x08 */
-} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
-  Mpi2DriverMappingPage0_t, MPI2_POINTER pMpi2DriverMappingPage0_t;
-
-#define MPI2_DRIVERMAPPING0_PAGEVERSION         (0x00)
-
-/* values for Driver Persistent Mapping Page 0 MappingInformation field */
-#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK              (0x07F0)
-#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT             (4)
-#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK           (0x000F)
-
-
-/****************************************************************************
-*   Ethernet Config Pages
-****************************************************************************/
-
-/* Ethernet Page 0 */
-
-/* IP address (union of IPv4 and IPv6) */
-typedef union _MPI2_ETHERNET_IP_ADDR {
-    U32     IPv4Addr;
-    U32     IPv6Addr[4];
-} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR,
-  Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t;
-
-#define MPI2_ETHERNET_HOST_NAME_LENGTH          (32)
-
-typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
-    U8                                  NumInterfaces;          /* 0x08 */
-    U8                                  Reserved0;              /* 0x09 */
-    U16                                 Reserved1;              /* 0x0A */
-    U32                                 Status;                 /* 0x0C */
-    U8                                  MediaState;             /* 0x10 */
-    U8                                  Reserved2;              /* 0x11 */
-    U16                                 Reserved3;              /* 0x12 */
-    U8                                  MacAddress[6];          /* 0x14 */
-    U8                                  Reserved4;              /* 0x1A */
-    U8                                  Reserved5;              /* 0x1B */
-    MPI2_ETHERNET_IP_ADDR               IpAddress;              /* 0x1C */
-    MPI2_ETHERNET_IP_ADDR               SubnetMask;             /* 0x2C */
-    MPI2_ETHERNET_IP_ADDR               GatewayIpAddress;       /* 0x3C */
-    MPI2_ETHERNET_IP_ADDR               DNS1IpAddress;          /* 0x4C */
-    MPI2_ETHERNET_IP_ADDR               DNS2IpAddress;          /* 0x5C */
-    MPI2_ETHERNET_IP_ADDR               DhcpIpAddress;          /* 0x6C */
-    U8                                  HostName
-				[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
-} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
-  Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t;
-
-#define MPI2_ETHERNETPAGE0_PAGEVERSION   (0x00)
-
-/* values for Ethernet Page 0 Status field */
-#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE             (0x80000000)
-#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE             (0x40000000)
-#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED        (0x20000000)
-#define MPI2_ETHPG0_STATUS_DEFAULT_IF               (0x00000100)
-#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED         (0x00000080)
-#define MPI2_ETHPG0_STATUS_TELNET_ENABLED           (0x00000040)
-#define MPI2_ETHPG0_STATUS_SSH2_ENABLED             (0x00000020)
-#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED      (0x00000010)
-#define MPI2_ETHPG0_STATUS_IPV6_ENABLED             (0x00000008)
-#define MPI2_ETHPG0_STATUS_IPV4_ENABLED             (0x00000004)
-#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES           (0x00000002)
-#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED           (0x00000001)
-
-/* values for Ethernet Page 0 MediaState field */
-#define MPI2_ETHPG0_MS_DUPLEX_MASK                  (0x80)
-#define MPI2_ETHPG0_MS_HALF_DUPLEX                  (0x00)
-#define MPI2_ETHPG0_MS_FULL_DUPLEX                  (0x80)
-
-#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK           (0x07)
-#define MPI2_ETHPG0_MS_NOT_CONNECTED                (0x00)
-#define MPI2_ETHPG0_MS_10MBIT                       (0x01)
-#define MPI2_ETHPG0_MS_100MBIT                      (0x02)
-#define MPI2_ETHPG0_MS_1GBIT                        (0x03)
-
-
-/* Ethernet Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
-    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
-    U32                                 Reserved0;              /* 0x08 */
-    U32                                 Flags;                  /* 0x0C */
-    U8                                  MediaState;             /* 0x10 */
-    U8                                  Reserved1;              /* 0x11 */
-    U16                                 Reserved2;              /* 0x12 */
-    U8                                  MacAddress[6];          /* 0x14 */
-    U8                                  Reserved3;              /* 0x1A */
-    U8                                  Reserved4;              /* 0x1B */
-    MPI2_ETHERNET_IP_ADDR               StaticIpAddress;        /* 0x1C */
-    MPI2_ETHERNET_IP_ADDR               StaticSubnetMask;       /* 0x2C */
-    MPI2_ETHERNET_IP_ADDR               StaticGatewayIpAddress; /* 0x3C */
-    MPI2_ETHERNET_IP_ADDR               StaticDNS1IpAddress;    /* 0x4C */
-    MPI2_ETHERNET_IP_ADDR               StaticDNS2IpAddress;    /* 0x5C */
-    U32                                 Reserved5;              /* 0x6C */
-    U32                                 Reserved6;              /* 0x70 */
-    U32                                 Reserved7;              /* 0x74 */
-    U32                                 Reserved8;              /* 0x78 */
-    U8                                  HostName
-				[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
-} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
-  Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t;
-
-#define MPI2_ETHERNETPAGE1_PAGEVERSION   (0x00)
-
-/* values for Ethernet Page 1 Flags field */
-#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF             (0x00000100)
-#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD         (0x00000080)
-#define MPI2_ETHPG1_FLAG_ENABLE_TELNET              (0x00000040)
-#define MPI2_ETHPG1_FLAG_ENABLE_SSH2                (0x00000020)
-#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT         (0x00000010)
-#define MPI2_ETHPG1_FLAG_ENABLE_IPV6                (0x00000008)
-#define MPI2_ETHPG1_FLAG_ENABLE_IPV4                (0x00000004)
-#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES         (0x00000002)
-#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF              (0x00000001)
-
-/* values for Ethernet Page 1 MediaState field */
-#define MPI2_ETHPG1_MS_DUPLEX_MASK                  (0x80)
-#define MPI2_ETHPG1_MS_HALF_DUPLEX                  (0x00)
-#define MPI2_ETHPG1_MS_FULL_DUPLEX                  (0x80)
-
-#define MPI2_ETHPG1_MS_DATA_RATE_MASK               (0x07)
-#define MPI2_ETHPG1_MS_DATA_RATE_AUTO               (0x00)
-#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT             (0x01)
-#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT            (0x02)
-#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT              (0x03)
-
-
-/****************************************************************************
-*   Extended Manufacturing Config Pages
-****************************************************************************/
-
-/*
- * Generic structure to use for product-specific extended manufacturing pages
- * (currently Extended Manufacturing Page 40 through Extended Manufacturing
- * Page 60).
- */
-
-typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
-	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
-	U32                                 ProductSpecificInfo;    /* 0x08 */
-}	MPI2_CONFIG_PAGE_EXT_MAN_PS,
-	MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS,
-	Mpi2ExtManufacturingPagePS_t,
-	MPI2_POINTER pMpi2ExtManufacturingPagePS_t;
-
-/* PageVersion should be provided by product-specific code */
-
-#endif
-
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
deleted file mode 100644
index eea1a16b1..000000000
--- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h
+++ /dev/null
@@ -1,461 +0,0 @@
-/*
- *  Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- *           Name:  mpi2_init.h
- *          Title:  MPI SCSI initiator mode messages and structures
- *  Creation Date:  June 23, 2006
- *
- *    mpi2_init.h Version:  02.00.15
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  10-31-07  02.00.01  Fixed name for pMpi2SCSITaskManagementRequest_t.
- *  12-18-07  02.00.02  Modified Task Management Target Reset Method defines.
- *  02-29-08  02.00.03  Added Query Task Set and Query Unit Attention.
- *  03-03-08  02.00.04  Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
- *  05-21-08  02.00.05  Fixed typo in name of Mpi2SepRequest_t.
- *  10-02-08  02.00.06  Removed Untagged and No Disconnect values from SCSI IO
- *                      Control field Task Attribute flags.
- *                      Moved LUN field defines to mpi2.h because they are
- *                      common to many structures.
- *  05-06-09  02.00.07  Changed task management type of Query Unit Attention to
- *                      Query Asynchronous Event.
- *                      Defined two new bits in the SlotStatus field of the SCSI
- *                      Enclosure Processor Request and Reply.
- *  10-28-09  02.00.08  Added defines for decoding the ResponseInfo bytes for
- *                      both SCSI IO Error Reply and SCSI Task Management Reply.
- *                      Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
- *                      Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
- *  02-10-10  02.00.09  Removed unused structure that had "#if 0" around it.
- *  05-12-10  02.00.10  Added optional vendor-unique region to SCSI IO Request.
- *  11-10-10  02.00.11  Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
- *  02-06-12  02.00.13  Added alternate defines for Task Priority / Command
- *                      Priority to match SAM-4.
- *  07-10-12  02.00.14  Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
- *  04-09-13  02.00.15  Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
- *			replacing the Reserved4 field.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_INIT_H
-#define MPI2_INIT_H
-
-/*****************************************************************************
-*
-*               SCSI Initiator Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-*  SCSI IO messages and associated structures
-****************************************************************************/
-
-typedef struct
-{
-    U8                      CDB[20];                    /* 0x00 */
-    U32                     PrimaryReferenceTag;        /* 0x14 */
-    U16                     PrimaryApplicationTag;      /* 0x18 */
-    U16                     PrimaryApplicationTagMask;  /* 0x1A */
-    U32                     TransferLength;             /* 0x1C */
-} MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32,
-  Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t;
-
-typedef union
-{
-    U8                      CDB32[32];
-    MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
-    MPI2_SGE_SIMPLE_UNION   SGE;
-} MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION,
-  Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t;
-
-/* SCSI IO Request Message */
-typedef struct _MPI2_SCSI_IO_REQUEST
-{
-    U16                     DevHandle;                      /* 0x00 */
-    U8                      ChainOffset;                    /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     Reserved1;                      /* 0x04 */
-    U8                      Reserved2;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved3;                      /* 0x0A */
-    U32                     SenseBufferLowAddress;          /* 0x0C */
-    U16                     SGLFlags;                       /* 0x10 */
-    U8                      SenseBufferLength;              /* 0x12 */
-    U8                      Reserved4;                      /* 0x13 */
-    U8                      SGLOffset0;                     /* 0x14 */
-    U8                      SGLOffset1;                     /* 0x15 */
-    U8                      SGLOffset2;                     /* 0x16 */
-    U8                      SGLOffset3;                     /* 0x17 */
-    U32                     SkipCount;                      /* 0x18 */
-    U32                     DataLength;                     /* 0x1C */
-    U32                     BidirectionalDataLength;        /* 0x20 */
-    U16                     IoFlags;                        /* 0x24 */
-    U16                     EEDPFlags;                      /* 0x26 */
-    U32                     EEDPBlockSize;                  /* 0x28 */
-    U32                     SecondaryReferenceTag;          /* 0x2C */
-    U16                     SecondaryApplicationTag;        /* 0x30 */
-    U16                     ApplicationTagTranslationMask;  /* 0x32 */
-    U8                      LUN[8];                         /* 0x34 */
-    U32                     Control;                        /* 0x3C */
-    MPI2_SCSI_IO_CDB_UNION  CDB;                            /* 0x40 */
-
-#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /* typically this is left undefined */
-	MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion;
-#endif
-
-    MPI2_SGE_IO_UNION       SGL;                            /* 0x60 */
-
-} MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST,
-  Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t;
-
-/* SCSI IO MsgFlags bits */
-
-/* MsgFlags for SenseBufferAddressSpace */
-#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR        (0x0C)
-#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR      (0x00)
-#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR      (0x04)
-#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR      (0x08)
-#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR   (0x0C)
-
-/* SCSI IO SGLFlags bits */
-
-/* base values for Data Location Address Space */
-#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK              (0x0C)
-#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR            (0x00)
-#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR            (0x04)
-#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR            (0x08)
-#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR         (0x0C)
-
-/* base values for Type */
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK              (0x03)
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI               (0x00)
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32            (0x01)
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64            (0x02)
-
-/* shift values for each sub-field */
-#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT             (12)
-#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT             (8)
-#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT             (4)
-#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT             (0)
-
-/* number of SGLOffset fields */
-#define MPI2_SCSIIO_NUM_SGLOFFSETS                  (4)
-
-/* SCSI IO IoFlags bits */
-
-/* Large CDB Address Space */
-#define MPI2_SCSIIO_CDB_ADDR_MASK                   (0x6000)
-#define MPI2_SCSIIO_CDB_ADDR_SYSTEM                 (0x0000)
-#define MPI2_SCSIIO_CDB_ADDR_IOCDDR                 (0x2000)
-#define MPI2_SCSIIO_CDB_ADDR_IOCPLB                 (0x4000)
-#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA              (0x6000)
-
-#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB               (0x1000)
-#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL           (0x0800)
-#define MPI2_SCSIIO_IOFLAGS_MULTICAST               (0x0400)
-#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200)
-#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK          (0x01FF)
-
-/* SCSI IO EEDPFlags bits */
-
-#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG        (0x8000)
-#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG        (0x4000)
-#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG        (0x2000)
-#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG        (0x1000)
-
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG          (0x0400)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG          (0x0200)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD           (0x0100)
-
-#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG       (0x0008)
-
-#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP               (0x0007)
-#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP               (0x0000)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP              (0x0001)
-#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP              (0x0002)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP       (0x0003)
-#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP             (0x0004)
-#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP            (0x0006)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP        (0x0007)
-
-/* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */
-
-/* SCSI IO Control bits */
-#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK      (0xFC000000)
-#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT     (26)
-
-#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK  (0x03000000)
-#define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24)
-#define MPI2_SCSIIO_CONTROL_NODATATRANSFER      (0x00000000)
-#define MPI2_SCSIIO_CONTROL_WRITE               (0x01000000)
-#define MPI2_SCSIIO_CONTROL_READ                (0x02000000)
-#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL       (0x03000000)
-
-#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK        (0x00007800)
-#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT       (11)
-/* alternate name for the previous field; called Command Priority in SAM-4 */
-#define MPI2_SCSIIO_CONTROL_CMDPRI_MASK         (0x00007800)
-#define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT        (11)
-
-#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK  (0x00000700)
-#define MPI2_SCSIIO_CONTROL_SIMPLEQ             (0x00000000)
-#define MPI2_SCSIIO_CONTROL_HEADOFQ             (0x00000100)
-#define MPI2_SCSIIO_CONTROL_ORDEREDQ            (0x00000200)
-#define MPI2_SCSIIO_CONTROL_ACAQ                (0x00000400)
-
-#define MPI2_SCSIIO_CONTROL_TLR_MASK            (0x000000C0)
-#define MPI2_SCSIIO_CONTROL_NO_TLR              (0x00000000)
-#define MPI2_SCSIIO_CONTROL_TLR_ON              (0x00000040)
-#define MPI2_SCSIIO_CONTROL_TLR_OFF             (0x00000080)
-
-
-/* SCSI IO Error Reply Message */
-typedef struct _MPI2_SCSI_IO_REPLY
-{
-    U16                     DevHandle;                      /* 0x00 */
-    U8                      MsgLength;                      /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     Reserved1;                      /* 0x04 */
-    U8                      Reserved2;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved3;                      /* 0x0A */
-    U8                      SCSIStatus;                     /* 0x0C */
-    U8                      SCSIState;                      /* 0x0D */
-    U16                     IOCStatus;                      /* 0x0E */
-    U32                     IOCLogInfo;                     /* 0x10 */
-    U32                     TransferCount;                  /* 0x14 */
-    U32                     SenseCount;                     /* 0x18 */
-    U32                     ResponseInfo;                   /* 0x1C */
-    U16                     TaskTag;                        /* 0x20 */
-	U16                     SCSIStatusQualifier;	     /* 0x22 */
-    U32                     BidirectionalTransferCount;     /* 0x24 */
-    U32                     Reserved5;                      /* 0x28 */
-    U32                     Reserved6;                      /* 0x2C */
-} MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY,
-  Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t;
-
-/* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
-
-#define MPI2_SCSI_STATUS_GOOD                   (0x00)
-#define MPI2_SCSI_STATUS_CHECK_CONDITION        (0x02)
-#define MPI2_SCSI_STATUS_CONDITION_MET          (0x04)
-#define MPI2_SCSI_STATUS_BUSY                   (0x08)
-#define MPI2_SCSI_STATUS_INTERMEDIATE           (0x10)
-#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET   (0x14)
-#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT   (0x18)
-#define MPI2_SCSI_STATUS_COMMAND_TERMINATED     (0x22) /* obsolete */
-#define MPI2_SCSI_STATUS_TASK_SET_FULL          (0x28)
-#define MPI2_SCSI_STATUS_ACA_ACTIVE             (0x30)
-#define MPI2_SCSI_STATUS_TASK_ABORTED           (0x40)
-
-/* SCSI IO Reply SCSIState flags */
-
-#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID     (0x10)
-#define MPI2_SCSI_STATE_TERMINATED              (0x08)
-#define MPI2_SCSI_STATE_NO_SCSI_STATUS          (0x04)
-#define MPI2_SCSI_STATE_AUTOSENSE_FAILED        (0x02)
-#define MPI2_SCSI_STATE_AUTOSENSE_VALID         (0x01)
-
-/* masks and shifts for the ResponseInfo field */
-
-#define MPI2_SCSI_RI_MASK_REASONCODE            (0x000000FF)
-#define MPI2_SCSI_RI_SHIFT_REASONCODE           (0)
-
-#define MPI2_SCSI_TASKTAG_UNKNOWN               (0xFFFF)
-
-
-/****************************************************************************
-*  SCSI Task Management messages
-****************************************************************************/
-
-/* SCSI Task Management Request Message */
-typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST
-{
-    U16                     DevHandle;                      /* 0x00 */
-    U8                      ChainOffset;                    /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U8                      Reserved1;                      /* 0x04 */
-    U8                      TaskType;                       /* 0x05 */
-    U8                      Reserved2;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved3;                      /* 0x0A */
-    U8                      LUN[8];                         /* 0x0C */
-    U32                     Reserved4[7];                   /* 0x14 */
-    U16                     TaskMID;                        /* 0x30 */
-    U16                     Reserved5;                      /* 0x32 */
-} MPI2_SCSI_TASK_MANAGE_REQUEST,
-  MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST,
-  Mpi2SCSITaskManagementRequest_t,
-  MPI2_POINTER pMpi2SCSITaskManagementRequest_t;
-
-/* TaskType values */
-
-#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK           (0x01)
-#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET        (0x02)
-#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET         (0x03)
-#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET   (0x05)
-#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET       (0x06)
-#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK           (0x07)
-#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA              (0x08)
-#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET         (0x09)
-#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT      (0x0A)
-
-/* obsolete TaskType name */
-#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION	\
-	(MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
-
-/* MsgFlags bits */
-
-#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET    (0x18)
-#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET           (0x00)
-#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST     (0x08)
-#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET  (0x10)
-
-#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU  (0x01)
-
-
-
-/* SCSI Task Management Reply Message */
-typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY
-{
-    U16                     DevHandle;                      /* 0x00 */
-    U8                      MsgLength;                      /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U8                      ResponseCode;                   /* 0x04 */
-    U8                      TaskType;                       /* 0x05 */
-    U8                      Reserved1;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved2;                      /* 0x0A */
-    U16                     Reserved3;                      /* 0x0C */
-    U16                     IOCStatus;                      /* 0x0E */
-    U32                     IOCLogInfo;                     /* 0x10 */
-    U32                     TerminationCount;               /* 0x14 */
-    U32                     ResponseInfo;                   /* 0x18 */
-} MPI2_SCSI_TASK_MANAGE_REPLY,
-  MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
-  Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t;
-
-/* ResponseCode values */
-
-#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE               (0x00)
-#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME             (0x02)
-#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED          (0x04)
-#define MPI2_SCSITASKMGMT_RSP_TM_FAILED                 (0x05)
-#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED              (0x08)
-#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN            (0x09)
-#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG         (0x0A)
-#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC          (0x80)
-
-/* masks and shifts for the ResponseInfo field */
-
-#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE            (0x000000FF)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE           (0)
-#define MPI2_SCSITASKMGMT_RI_MASK_ARI2                  (0x0000FF00)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2                 (8)
-#define MPI2_SCSITASKMGMT_RI_MASK_ARI1                  (0x00FF0000)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1                 (16)
-#define MPI2_SCSITASKMGMT_RI_MASK_ARI0                  (0xFF000000)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0                 (24)
-
-
-/****************************************************************************
-*  SCSI Enclosure Processor messages
-****************************************************************************/
-
-/* SCSI Enclosure Processor Request Message */
-typedef struct _MPI2_SEP_REQUEST
-{
-    U16                     DevHandle;          /* 0x00 */
-    U8                      ChainOffset;        /* 0x02 */
-    U8                      Function;           /* 0x03 */
-    U8                      Action;             /* 0x04 */
-    U8                      Flags;              /* 0x05 */
-    U8                      Reserved1;          /* 0x06 */
-    U8                      MsgFlags;           /* 0x07 */
-    U8                      VP_ID;              /* 0x08 */
-    U8                      VF_ID;              /* 0x09 */
-    U16                     Reserved2;          /* 0x0A */
-    U32                     SlotStatus;         /* 0x0C */
-    U32                     Reserved3;          /* 0x10 */
-    U32                     Reserved4;          /* 0x14 */
-    U32                     Reserved5;          /* 0x18 */
-    U16                     Slot;               /* 0x1C */
-    U16                     EnclosureHandle;    /* 0x1E */
-} MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST,
-  Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t;
-
-/* Action defines */
-#define MPI2_SEP_REQ_ACTION_WRITE_STATUS                (0x00)
-#define MPI2_SEP_REQ_ACTION_READ_STATUS                 (0x01)
-
-/* Flags defines */
-#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS            (0x00)
-#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS       (0x01)
-
-/* SlotStatus defines */
-#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE          (0x00040000)
-#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST        (0x00020000)
-#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED         (0x00000200)
-#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE               (0x00000100)
-#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED            (0x00000080)
-#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT         (0x00000040)
-#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY       (0x00000010)
-#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY         (0x00000008)
-#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING          (0x00000004)
-#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY              (0x00000002)
-#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR                (0x00000001)
-
-
-/* SCSI Enclosure Processor Reply Message */
-typedef struct _MPI2_SEP_REPLY
-{
-    U16                     DevHandle;          /* 0x00 */
-    U8                      MsgLength;          /* 0x02 */
-    U8                      Function;           /* 0x03 */
-    U8                      Action;             /* 0x04 */
-    U8                      Flags;              /* 0x05 */
-    U8                      Reserved1;          /* 0x06 */
-    U8                      MsgFlags;           /* 0x07 */
-    U8                      VP_ID;              /* 0x08 */
-    U8                      VF_ID;              /* 0x09 */
-    U16                     Reserved2;          /* 0x0A */
-    U16                     Reserved3;          /* 0x0C */
-    U16                     IOCStatus;          /* 0x0E */
-    U32                     IOCLogInfo;         /* 0x10 */
-    U32                     SlotStatus;         /* 0x14 */
-    U32                     Reserved4;          /* 0x18 */
-    U16                     Slot;               /* 0x1C */
-    U16                     EnclosureHandle;    /* 0x1E */
-} MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY,
-  Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t;
-
-/* SlotStatus defines */
-#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY          (0x00040000)
-#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST      (0x00020000)
-#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED       (0x00000200)
-#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE             (0x00000100)
-#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED          (0x00000080)
-#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT       (0x00000040)
-#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY     (0x00000010)
-#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY       (0x00000008)
-#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING        (0x00000004)
-#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY            (0x00000002)
-#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR              (0x00000001)
-
-
-#endif
-
-
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
deleted file mode 100644
index b02de48be..000000000
--- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
+++ /dev/null
@@ -1,1708 +0,0 @@
-/*
- *  Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- *           Name:  mpi2_ioc.h
- *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
- *  Creation Date:  October 11, 2006
- *
- *  mpi2_ioc.h Version:  02.00.24
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  06-04-07  02.00.01  In IOCFacts Reply structure, renamed MaxDevices to
- *                      MaxTargets.
- *                      Added TotalImageSize field to FWDownload Request.
- *                      Added reserved words to FWUpload Request.
- *  06-26-07  02.00.02  Added IR Configuration Change List Event.
- *  08-31-07  02.00.03  Removed SystemReplyQueueDepth field from the IOCInit
- *                      request and replaced it with
- *                      ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
- *                      Replaced the MinReplyQueueDepth field of the IOCFacts
- *                      reply with MaxReplyDescriptorPostQueueDepth.
- *                      Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
- *                      depth for the Reply Descriptor Post Queue.
- *                      Added SASAddress field to Initiator Device Table
- *                      Overflow Event data.
- *  10-31-07  02.00.04  Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
- *                      for SAS Initiator Device Status Change Event data.
- *                      Modified Reason Code defines for SAS Topology Change
- *                      List Event data, including adding a bit for PHY Vacant
- *                      status, and adding a mask for the Reason Code.
- *                      Added define for
- *                      MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
- *                      Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
- *  12-18-07  02.00.05  Added Boot Status defines for the IOCExceptions field of
- *                      the IOCFacts Reply.
- *                      Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
- *                      Moved MPI2_VERSION_UNION to mpi2.h.
- *                      Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
- *                      instead of enables, and added SASBroadcastPrimitiveMasks
- *                      field.
- *                      Added Log Entry Added Event and related structure.
- *  02-29-08  02.00.06  Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
- *                      Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
- *                      Added MaxVolumes and MaxPersistentEntries fields to
- *                      IOCFacts reply.
- *                      Added ProtocalFlags and IOCCapabilities fields to
- *                      MPI2_FW_IMAGE_HEADER.
- *                      Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
- *  03-03-08  02.00.07  Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
- *                      a U16 (from a U32).
- *                      Removed extra 's' from EventMasks name.
- *  06-27-08  02.00.08  Fixed an offset in a comment.
- *  10-02-08  02.00.09  Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
- *                      Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
- *                      renamed MinReplyFrameSize to ReplyFrameSize.
- *                      Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
- *                      Added two new RAIDOperation values for Integrated RAID
- *                      Operations Status Event data.
- *                      Added four new IR Configuration Change List Event data
- *                      ReasonCode values.
- *                      Added two new ReasonCode defines for SAS Device Status
- *                      Change Event data.
- *                      Added three new DiscoveryStatus bits for the SAS
- *                      Discovery event data.
- *                      Added Multiplexing Status Change bit to the PhyStatus
- *                      field of the SAS Topology Change List event data.
- *                      Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
- *                      BootFlags are now product-specific.
- *                      Added defines for the indivdual signature bytes
- *                      for MPI2_INIT_IMAGE_FOOTER.
- *  01-19-09  02.00.10  Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
- *                      Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
- *                      define.
- *                      Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
- *                      define.
- *                      Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
- *  05-06-09  02.00.11  Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
- *                      Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
- *                      Added two new reason codes for SAS Device Status Change
- *                      Event.
- *                      Added new event: SAS PHY Counter.
- *  07-30-09  02.00.12  Added GPIO Interrupt event define and structure.
- *                      Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
- *                      Added new product id family for 2208.
- *  10-28-09  02.00.13  Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
- *                      Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
- *                      Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
- *                      Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
- *                      Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
- *                      Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
- *                      Added Host Based Discovery Phy Event data.
- *                      Added defines for ProductID Product field
- *                      (MPI2_FW_HEADER_PID_).
- *                      Modified values for SAS ProductID Family
- *                      (MPI2_FW_HEADER_PID_FAMILY_).
- *  02-10-10  02.00.14  Added SAS Quiesce Event structure and defines.
- *                      Added PowerManagementControl Request structures and
- *                      defines.
- *  05-12-10  02.00.15  Marked Task Set Full Event as obsolete.
- *                      Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
- *  11-10-10  02.00.16  Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
- *  02-23-11  02.00.17  Added SAS NOTIFY Primitive event, and added
- *                      SASNotifyPrimitiveMasks field to
- *                      MPI2_EVENT_NOTIFICATION_REQUEST.
- *                      Added Temperature Threshold Event.
- *                      Added Host Message Event.
- *                      Added Send Host Message request and reply.
- *  05-25-11  02.00.18  For Extended Image Header, added
- *                      MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and
- *                      MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines.
- *                      Deprecated MPI2_EXT_IMAGE_TYPE_MAX define.
- *  08-24-11  02.00.19  Added PhysicalPort field to
- *                      MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure.
- *                      Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
- *  03-29-12  02.00.21  Added a product specific range to event values.
- *  07-26-12  02.00.22  Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
- *                      Added ElapsedSeconds field to
- *                      MPI2_EVENT_DATA_IR_OPERATION_STATUS.
- *  08-19-13  02.00.23  For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE
- *                      and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY.
- *                      Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
- *                      Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
- *                      Added Encrypted Hash Extended Image.
- *  12-05-13  02.00.24  Added MPI25_HASH_IMAGE_TYPE_BIOS.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_IOC_H
-#define MPI2_IOC_H
-
-/*****************************************************************************
-*
-*               IOC Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-*  IOCInit message
-****************************************************************************/
-
-/* IOCInit Request message */
-typedef struct _MPI2_IOC_INIT_REQUEST
-{
-    U8                      WhoInit;                        /* 0x00 */
-    U8                      Reserved1;                      /* 0x01 */
-    U8                      ChainOffset;                    /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     Reserved2;                      /* 0x04 */
-    U8                      Reserved3;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved4;                      /* 0x0A */
-    U16                     MsgVersion;                     /* 0x0C */
-    U16                     HeaderVersion;                  /* 0x0E */
-    U32                     Reserved5;                      /* 0x10 */
-    U16                     Reserved6;                      /* 0x14 */
-    U8                      Reserved7;                      /* 0x16 */
-    U8                      HostMSIxVectors;                /* 0x17 */
-    U16                     Reserved8;                      /* 0x18 */
-    U16                     SystemRequestFrameSize;         /* 0x1A */
-    U16                     ReplyDescriptorPostQueueDepth;  /* 0x1C */
-    U16                     ReplyFreeQueueDepth;            /* 0x1E */
-    U32                     SenseBufferAddressHigh;         /* 0x20 */
-    U32                     SystemReplyAddressHigh;         /* 0x24 */
-    U64                     SystemRequestFrameBaseAddress;  /* 0x28 */
-    U64                     ReplyDescriptorPostQueueAddress;/* 0x30 */
-    U64                     ReplyFreeQueueAddress;          /* 0x38 */
-    U64                     TimeStamp;                      /* 0x40 */
-} MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST,
-  Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t;
-
-/* WhoInit values */
-#define MPI2_WHOINIT_NOT_INITIALIZED            (0x00)
-#define MPI2_WHOINIT_SYSTEM_BIOS                (0x01)
-#define MPI2_WHOINIT_ROM_BIOS                   (0x02)
-#define MPI2_WHOINIT_PCI_PEER                   (0x03)
-#define MPI2_WHOINIT_HOST_DRIVER                (0x04)
-#define MPI2_WHOINIT_MANUFACTURER               (0x05)
-
-/* MsgFlags */
-#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE    (0x01)
-
-/* MsgVersion */
-#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK      (0xFF00)
-#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT     (8)
-#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK      (0x00FF)
-#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT     (0)
-
-/* HeaderVersion */
-#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK       (0xFF00)
-#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT      (8)
-#define MPI2_IOCINIT_HDRVERSION_DEV_MASK        (0x00FF)
-#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT       (0)
-
-/* minimum depth for a Reply Descriptor Post Queue */
-#define MPI2_RDPQ_DEPTH_MIN                     (16)
-
-/* Reply Descriptor Post Queue Array Entry */
-typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY {
-	U64                 RDPQBaseAddress;                    /* 0x00 */
-	U32                 Reserved1;                          /* 0x08 */
-	U32                 Reserved2;                          /* 0x0C */
-} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
-MPI2_POINTER PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
-Mpi2IOCInitRDPQArrayEntry, MPI2_POINTER pMpi2IOCInitRDPQArrayEntry;
-
-/* IOCInit Reply message */
-typedef struct _MPI2_IOC_INIT_REPLY
-{
-    U8                      WhoInit;                        /* 0x00 */
-    U8                      Reserved1;                      /* 0x01 */
-    U8                      MsgLength;                      /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     Reserved2;                      /* 0x04 */
-    U8                      Reserved3;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved4;                      /* 0x0A */
-    U16                     Reserved5;                      /* 0x0C */
-    U16                     IOCStatus;                      /* 0x0E */
-    U32                     IOCLogInfo;                     /* 0x10 */
-} MPI2_IOC_INIT_REPLY, MPI2_POINTER PTR_MPI2_IOC_INIT_REPLY,
-  Mpi2IOCInitReply_t, MPI2_POINTER pMpi2IOCInitReply_t;
-
-
-/****************************************************************************
-*  IOCFacts message
-****************************************************************************/
-
-/* IOCFacts Request message */
-typedef struct _MPI2_IOC_FACTS_REQUEST
-{
-    U16                     Reserved1;                      /* 0x00 */
-    U8                      ChainOffset;                    /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     Reserved2;                      /* 0x04 */
-    U8                      Reserved3;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved4;                      /* 0x0A */
-} MPI2_IOC_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_IOC_FACTS_REQUEST,
-  Mpi2IOCFactsRequest_t, MPI2_POINTER pMpi2IOCFactsRequest_t;
-
-
-/* IOCFacts Reply message */
-typedef struct _MPI2_IOC_FACTS_REPLY
-{
-    U16                     MsgVersion;                     /* 0x00 */
-    U8                      MsgLength;                      /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     HeaderVersion;                  /* 0x04 */
-    U8                      IOCNumber;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved1;                      /* 0x0A */
-    U16                     IOCExceptions;                  /* 0x0C */
-    U16                     IOCStatus;                      /* 0x0E */
-    U32                     IOCLogInfo;                     /* 0x10 */
-    U8                      MaxChainDepth;                  /* 0x14 */
-    U8                      WhoInit;                        /* 0x15 */
-    U8                      NumberOfPorts;                  /* 0x16 */
-    U8                      MaxMSIxVectors;                 /* 0x17 */
-    U16                     RequestCredit;                  /* 0x18 */
-    U16                     ProductID;                      /* 0x1A */
-    U32                     IOCCapabilities;                /* 0x1C */
-    MPI2_VERSION_UNION      FWVersion;                      /* 0x20 */
-    U16                     IOCRequestFrameSize;            /* 0x24 */
-    U16                     Reserved3;                      /* 0x26 */
-    U16                     MaxInitiators;                  /* 0x28 */
-    U16                     MaxTargets;                     /* 0x2A */
-    U16                     MaxSasExpanders;                /* 0x2C */
-    U16                     MaxEnclosures;                  /* 0x2E */
-    U16                     ProtocolFlags;                  /* 0x30 */
-    U16                     HighPriorityCredit;             /* 0x32 */
-    U16                     MaxReplyDescriptorPostQueueDepth; /* 0x34 */
-    U8                      ReplyFrameSize;                 /* 0x36 */
-    U8                      MaxVolumes;                     /* 0x37 */
-    U16                     MaxDevHandle;                   /* 0x38 */
-    U16                     MaxPersistentEntries;           /* 0x3A */
-    U16                     MinDevHandle;                   /* 0x3C */
-    U16                     Reserved4;                      /* 0x3E */
-} MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY,
-  Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t;
-
-/* MsgVersion */
-#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK             (0xFF00)
-#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT            (8)
-#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK             (0x00FF)
-#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT            (0)
-
-/* HeaderVersion */
-#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK              (0xFF00)
-#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT             (8)
-#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK               (0x00FF)
-#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT              (0)
-
-/* IOCExceptions */
-#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE     (0x0200)
-#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX      (0x0100)
-
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK              (0x00E0)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD              (0x0000)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP            (0x0020)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED          (0x0040)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP    (0x0060)
-
-#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED       (0x0010)
-#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL     (0x0008)
-#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL           (0x0004)
-#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID        (0x0002)
-#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL       (0x0001)
-
-/* defines for WhoInit field are after the IOCInit Request */
-
-/* ProductID field uses MPI2_FW_HEADER_PID_ */
-
-/* IOCCapabilities */
-#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE     (0x00040000)
-#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY   (0x00010000)
-#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX            (0x00008000)
-#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR       (0x00004000)
-#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY           (0x00002000)
-#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID        (0x00001000)
-#define MPI2_IOCFACTS_CAPABILITY_TLR                    (0x00000800)
-#define MPI2_IOCFACTS_CAPABILITY_MULTICAST              (0x00000100)
-#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET   (0x00000080)
-#define MPI2_IOCFACTS_CAPABILITY_EEDP                   (0x00000040)
-#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER        (0x00000020)
-#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER        (0x00000010)
-#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER      (0x00000008)
-#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
-
-/* ProtocolFlags */
-#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET              (0x0001)
-#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR           (0x0002)
-
-
-/****************************************************************************
-*  PortFacts message
-****************************************************************************/
-
-/* PortFacts Request message */
-typedef struct _MPI2_PORT_FACTS_REQUEST
-{
-    U16                     Reserved1;                      /* 0x00 */
-    U8                      ChainOffset;                    /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     Reserved2;                      /* 0x04 */
-    U8                      PortNumber;                     /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved3;                      /* 0x0A */
-} MPI2_PORT_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_PORT_FACTS_REQUEST,
-  Mpi2PortFactsRequest_t, MPI2_POINTER pMpi2PortFactsRequest_t;
-
-/* PortFacts Reply message */
-typedef struct _MPI2_PORT_FACTS_REPLY
-{
-    U16                     Reserved1;                      /* 0x00 */
-    U8                      MsgLength;                      /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     Reserved2;                      /* 0x04 */
-    U8                      PortNumber;                     /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved3;                      /* 0x0A */
-    U16                     Reserved4;                      /* 0x0C */
-    U16                     IOCStatus;                      /* 0x0E */
-    U32                     IOCLogInfo;                     /* 0x10 */
-    U8                      Reserved5;                      /* 0x14 */
-    U8                      PortType;                       /* 0x15 */
-    U16                     Reserved6;                      /* 0x16 */
-    U16                     MaxPostedCmdBuffers;            /* 0x18 */
-    U16                     Reserved7;                      /* 0x1A */
-} MPI2_PORT_FACTS_REPLY, MPI2_POINTER PTR_MPI2_PORT_FACTS_REPLY,
-  Mpi2PortFactsReply_t, MPI2_POINTER pMpi2PortFactsReply_t;
-
-/* PortType values */
-#define MPI2_PORTFACTS_PORTTYPE_INACTIVE            (0x00)
-#define MPI2_PORTFACTS_PORTTYPE_FC                  (0x10)
-#define MPI2_PORTFACTS_PORTTYPE_ISCSI               (0x20)
-#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL        (0x30)
-#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL         (0x31)
-
-
-/****************************************************************************
-*  PortEnable message
-****************************************************************************/
-
-/* PortEnable Request message */
-typedef struct _MPI2_PORT_ENABLE_REQUEST
-{
-    U16                     Reserved1;                      /* 0x00 */
-    U8                      ChainOffset;                    /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U8                      Reserved2;                      /* 0x04 */
-    U8                      PortFlags;                      /* 0x05 */
-    U8                      Reserved3;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved4;                      /* 0x0A */
-} MPI2_PORT_ENABLE_REQUEST, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REQUEST,
-  Mpi2PortEnableRequest_t, MPI2_POINTER pMpi2PortEnableRequest_t;
-
-
-/* PortEnable Reply message */
-typedef struct _MPI2_PORT_ENABLE_REPLY
-{
-    U16                     Reserved1;                      /* 0x00 */
-    U8                      MsgLength;                      /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U8                      Reserved2;                      /* 0x04 */
-    U8                      PortFlags;                      /* 0x05 */
-    U8                      Reserved3;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved4;                      /* 0x0A */
-    U16                     Reserved5;                      /* 0x0C */
-    U16                     IOCStatus;                      /* 0x0E */
-    U32                     IOCLogInfo;                     /* 0x10 */
-} MPI2_PORT_ENABLE_REPLY, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REPLY,
-  Mpi2PortEnableReply_t, MPI2_POINTER pMpi2PortEnableReply_t;
-
-
-/****************************************************************************
-*  EventNotification message
-****************************************************************************/
-
-/* EventNotification Request message */
-#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS           (4)
-
-typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST
-{
-    U16                     Reserved1;                      /* 0x00 */
-    U8                      ChainOffset;                    /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     Reserved2;                      /* 0x04 */
-    U8                      Reserved3;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved4;                      /* 0x0A */
-    U32                     Reserved5;                      /* 0x0C */
-    U32                     Reserved6;                      /* 0x10 */
-    U32                     EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */
-    U16                     SASBroadcastPrimitiveMasks;     /* 0x24 */
-	 U16                     SASNotifyPrimitiveMasks;        /* 0x26 */
-    U32                     Reserved8;                      /* 0x28 */
-} MPI2_EVENT_NOTIFICATION_REQUEST,
-  MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
-  Mpi2EventNotificationRequest_t, MPI2_POINTER pMpi2EventNotificationRequest_t;
-
-
-/* EventNotification Reply message */
-typedef struct _MPI2_EVENT_NOTIFICATION_REPLY
-{
-    U16                     EventDataLength;                /* 0x00 */
-    U8                      MsgLength;                      /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     Reserved1;                      /* 0x04 */
-    U8                      AckRequired;                    /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved2;                      /* 0x0A */
-    U16                     Reserved3;                      /* 0x0C */
-    U16                     IOCStatus;                      /* 0x0E */
-    U32                     IOCLogInfo;                     /* 0x10 */
-    U16                     Event;                          /* 0x14 */
-    U16                     Reserved4;                      /* 0x16 */
-    U32                     EventContext;                   /* 0x18 */
-    U32                     EventData[1];                   /* 0x1C */
-} MPI2_EVENT_NOTIFICATION_REPLY, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REPLY,
-  Mpi2EventNotificationReply_t, MPI2_POINTER pMpi2EventNotificationReply_t;
-
-/* AckRequired */
-#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED    (0x00)
-#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED        (0x01)
-
-/* Event */
-#define MPI2_EVENT_LOG_DATA                         (0x0001)
-#define MPI2_EVENT_STATE_CHANGE                     (0x0002)
-#define MPI2_EVENT_HARD_RESET_RECEIVED              (0x0005)
-#define MPI2_EVENT_EVENT_CHANGE                     (0x000A)
-#define MPI2_EVENT_TASK_SET_FULL                    (0x000E) /* obsolete */
-#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE         (0x000F)
-#define MPI2_EVENT_IR_OPERATION_STATUS              (0x0014)
-#define MPI2_EVENT_SAS_DISCOVERY                    (0x0016)
-#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE          (0x0017)
-#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE    (0x0018)
-#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW          (0x0019)
-#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST         (0x001C)
-#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE    (0x001D)
-#define MPI2_EVENT_IR_VOLUME                        (0x001E)
-#define MPI2_EVENT_IR_PHYSICAL_DISK                 (0x001F)
-#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST     (0x0020)
-#define MPI2_EVENT_LOG_ENTRY_ADDED                  (0x0021)
-#define MPI2_EVENT_SAS_PHY_COUNTER                  (0x0022)
-#define MPI2_EVENT_GPIO_INTERRUPT                   (0x0023)
-#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY         (0x0024)
-#define MPI2_EVENT_SAS_QUIESCE                      (0x0025)
-#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE             (0x0026)
-#define MPI2_EVENT_TEMP_THRESHOLD                   (0x0027)
-#define MPI2_EVENT_HOST_MESSAGE                     (0x0028)
-#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC             (0x006E)
-#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC             (0x007F)
-
-/* Log Entry Added Event data */
-
-/* the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */
-#define MPI2_EVENT_DATA_LOG_DATA_LENGTH             (0x1C)
-
-typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED
-{
-    U64         TimeStamp;                          /* 0x00 */
-    U32         Reserved1;                          /* 0x08 */
-    U16         LogSequence;                        /* 0x0C */
-    U16         LogEntryQualifier;                  /* 0x0E */
-    U8          VP_ID;                              /* 0x10 */
-    U8          VF_ID;                              /* 0x11 */
-    U16         Reserved2;                          /* 0x12 */
-    U8          LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];/* 0x14 */
-} MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
-  Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t;
-
-/* GPIO Interrupt Event data */
-
-typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
-    U8          GPIONum;                            /* 0x00 */
-    U8          Reserved1;                          /* 0x01 */
-    U16         Reserved2;                          /* 0x02 */
-} MPI2_EVENT_DATA_GPIO_INTERRUPT,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
-  Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t;
-
-/* Temperature Threshold Event data */
-
-typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
-	U16         Status;                             /* 0x00 */
-	U8          SensorNum;                          /* 0x02 */
-	U8          Reserved1;                          /* 0x03 */
-	U16         CurrentTemperature;                 /* 0x04 */
-	U16         Reserved2;                          /* 0x06 */
-	U32         Reserved3;                          /* 0x08 */
-	U32         Reserved4;                          /* 0x0C */
-} MPI2_EVENT_DATA_TEMPERATURE,
-MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE,
-Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t;
-
-/* Temperature Threshold Event data Status bits */
-#define MPI2_EVENT_TEMPERATURE3_EXCEEDED            (0x0008)
-#define MPI2_EVENT_TEMPERATURE2_EXCEEDED            (0x0004)
-#define MPI2_EVENT_TEMPERATURE1_EXCEEDED            (0x0002)
-#define MPI2_EVENT_TEMPERATURE0_EXCEEDED            (0x0001)
-
-
-/* Host Message Event data */
-
-typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
-	U8          SourceVF_ID;                        /* 0x00 */
-	U8          Reserved1;                          /* 0x01 */
-	U16         Reserved2;                          /* 0x02 */
-	U32         Reserved3;                          /* 0x04 */
-	U32         HostData[1];                        /* 0x08 */
-} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
-Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t;
-
-
-/* Hard Reset Received Event data */
-
-typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED
-{
-    U8                      Reserved1;                      /* 0x00 */
-    U8                      Port;                           /* 0x01 */
-    U16                     Reserved2;                      /* 0x02 */
-} MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
-  Mpi2EventDataHardResetReceived_t,
-  MPI2_POINTER pMpi2EventDataHardResetReceived_t;
-
-/* Task Set Full Event data */
-/*   this event is obsolete */
-
-typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL
-{
-    U16                     DevHandle;                      /* 0x00 */
-    U16                     CurrentDepth;                   /* 0x02 */
-} MPI2_EVENT_DATA_TASK_SET_FULL, MPI2_POINTER PTR_MPI2_EVENT_DATA_TASK_SET_FULL,
-  Mpi2EventDataTaskSetFull_t, MPI2_POINTER pMpi2EventDataTaskSetFull_t;
-
-
-/* SAS Device Status Change Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
-{
-    U16                     TaskTag;                        /* 0x00 */
-    U8                      ReasonCode;                     /* 0x02 */
-	U8                      PhysicalPort;                   /* 0x03 */
-    U8                      ASC;                            /* 0x04 */
-    U8                      ASCQ;                           /* 0x05 */
-    U16                     DevHandle;                      /* 0x06 */
-    U32                     Reserved2;                      /* 0x08 */
-    U64                     SASAddress;                     /* 0x0C */
-    U8                      LUN[8];                         /* 0x14 */
-} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
-  Mpi2EventDataSasDeviceStatusChange_t,
-  MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t;
-
-/* SAS Device Status Change Event data ReasonCode values */
-#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA                           (0x05)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED                          (0x07)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET                (0x08)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL                  (0x09)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL              (0x0A)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL              (0x0B)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL                  (0x0C)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION                   (0x0D)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET               (0x0E)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL              (0x0F)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE                    (0x10)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY       (0x11)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY   (0x12)
-
-
-/* Integrated RAID Operation Status Event data */
-
-typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS
-{
-    U16                     VolDevHandle;               /* 0x00 */
-    U16                     Reserved1;                  /* 0x02 */
-    U8                      RAIDOperation;              /* 0x04 */
-    U8                      PercentComplete;            /* 0x05 */
-    U16                     Reserved2;                  /* 0x06 */
-	U32                     ElapsedSeconds;             /* 0x08 */
-} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
-  Mpi2EventDataIrOperationStatus_t,
-  MPI2_POINTER pMpi2EventDataIrOperationStatus_t;
-
-/* Integrated RAID Operation Status Event data RAIDOperation values */
-#define MPI2_EVENT_IR_RAIDOP_RESYNC                     (0x00)
-#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION       (0x01)
-#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK          (0x02)
-#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT            (0x03)
-#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT       (0x04)
-
-
-/* Integrated RAID Volume Event data */
-
-typedef struct _MPI2_EVENT_DATA_IR_VOLUME
-{
-    U16                     VolDevHandle;               /* 0x00 */
-    U8                      ReasonCode;                 /* 0x02 */
-    U8                      Reserved1;                  /* 0x03 */
-    U32                     NewValue;                   /* 0x04 */
-    U32                     PreviousValue;              /* 0x08 */
-} MPI2_EVENT_DATA_IR_VOLUME, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_VOLUME,
-  Mpi2EventDataIrVolume_t, MPI2_POINTER pMpi2EventDataIrVolume_t;
-
-/* Integrated RAID Volume Event data ReasonCode values */
-#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED        (0x01)
-#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED    (0x02)
-#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED           (0x03)
-
-
-/* Integrated RAID Physical Disk Event data */
-
-typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK
-{
-    U16                     Reserved1;                  /* 0x00 */
-    U8                      ReasonCode;                 /* 0x02 */
-    U8                      PhysDiskNum;                /* 0x03 */
-    U16                     PhysDiskDevHandle;          /* 0x04 */
-    U16                     Reserved2;                  /* 0x06 */
-    U16                     Slot;                       /* 0x08 */
-    U16                     EnclosureHandle;            /* 0x0A */
-    U32                     NewValue;                   /* 0x0C */
-    U32                     PreviousValue;              /* 0x10 */
-} MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
-  Mpi2EventDataIrPhysicalDisk_t, MPI2_POINTER pMpi2EventDataIrPhysicalDisk_t;
-
-/* Integrated RAID Physical Disk Event data ReasonCode values */
-#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED      (0x01)
-#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED  (0x02)
-#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED         (0x03)
-
-
-/* Integrated RAID Configuration Change List Event data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumElements at runtime.
- */
-#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
-#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT          (1)
-#endif
-
-typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT
-{
-    U16                     ElementFlags;               /* 0x00 */
-    U16                     VolDevHandle;               /* 0x02 */
-    U8                      ReasonCode;                 /* 0x04 */
-    U8                      PhysDiskNum;                /* 0x05 */
-    U16                     PhysDiskDevHandle;          /* 0x06 */
-} MPI2_EVENT_IR_CONFIG_ELEMENT, MPI2_POINTER PTR_MPI2_EVENT_IR_CONFIG_ELEMENT,
-  Mpi2EventIrConfigElement_t, MPI2_POINTER pMpi2EventIrConfigElement_t;
-
-/* IR Configuration Change List Event data ElementFlags values */
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK   (0x000F)
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT      (0x0000)
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001)
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT    (0x0002)
-
-/* IR Configuration Change List Event data ReasonCode values */
-#define MPI2_EVENT_IR_CHANGE_RC_ADDED                   (0x01)
-#define MPI2_EVENT_IR_CHANGE_RC_REMOVED                 (0x02)
-#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE               (0x03)
-#define MPI2_EVENT_IR_CHANGE_RC_HIDE                    (0x04)
-#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE                  (0x05)
-#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED          (0x06)
-#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED          (0x07)
-#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED              (0x08)
-#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED              (0x09)
-
-typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST
-{
-    U8                              NumElements;        /* 0x00 */
-    U8                              Reserved1;          /* 0x01 */
-    U8                              Reserved2;          /* 0x02 */
-    U8                              ConfigNum;          /* 0x03 */
-    U32                             Flags;              /* 0x04 */
-    MPI2_EVENT_IR_CONFIG_ELEMENT    ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];    /* 0x08 */
-} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
-  Mpi2EventDataIrConfigChangeList_t,
-  MPI2_POINTER pMpi2EventDataIrConfigChangeList_t;
-
-/* IR Configuration Change List Event data Flags values */
-#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG   (0x00000001)
-
-
-/* SAS Discovery Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY
-{
-    U8                      Flags;                      /* 0x00 */
-    U8                      ReasonCode;                 /* 0x01 */
-    U8                      PhysicalPort;               /* 0x02 */
-    U8                      Reserved1;                  /* 0x03 */
-    U32                     DiscoveryStatus;            /* 0x04 */
-} MPI2_EVENT_DATA_SAS_DISCOVERY,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DISCOVERY,
-  Mpi2EventDataSasDiscovery_t, MPI2_POINTER pMpi2EventDataSasDiscovery_t;
-
-/* SAS Discovery Event data Flags values */
-#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE                   (0x02)
-#define MPI2_EVENT_SAS_DISC_IN_PROGRESS                     (0x01)
-
-/* SAS Discovery Event data ReasonCode values */
-#define MPI2_EVENT_SAS_DISC_RC_STARTED                      (0x01)
-#define MPI2_EVENT_SAS_DISC_RC_COMPLETED                    (0x02)
-
-/* SAS Discovery Event data DiscoveryStatus values */
-#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED            (0x80000000)
-#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED             (0x40000000)
-#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED               (0x20000000)
-#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED             (0x10000000)
-#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR             (0x08000000)
-#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE    (0x00008000)
-#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE            (0x00004000)
-#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN                (0x00002000)
-#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK        (0x00001000)
-#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE               (0x00000800)
-#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK                       (0x00000400)
-#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK                 (0x00000200)
-#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR                    (0x00000100)
-#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED              (0x00000080)
-#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST                  (0x00000040)
-#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES                (0x00000020)
-#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT                      (0x00000010)
-#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS                   (0x00000004)
-#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE             (0x00000002)
-#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED                    (0x00000001)
-
-
-/* SAS Broadcast Primitive Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE
-{
-    U8                      PhyNum;                     /* 0x00 */
-    U8                      Port;                       /* 0x01 */
-    U8                      PortWidth;                  /* 0x02 */
-    U8                      Primitive;                  /* 0x03 */
-} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
-  Mpi2EventDataSasBroadcastPrimitive_t,
-  MPI2_POINTER pMpi2EventDataSasBroadcastPrimitive_t;
-
-/* defines for the Primitive field */
-#define MPI2_EVENT_PRIMITIVE_CHANGE                         (0x01)
-#define MPI2_EVENT_PRIMITIVE_SES                            (0x02)
-#define MPI2_EVENT_PRIMITIVE_EXPANDER                       (0x03)
-#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT             (0x04)
-#define MPI2_EVENT_PRIMITIVE_RESERVED3                      (0x05)
-#define MPI2_EVENT_PRIMITIVE_RESERVED4                      (0x06)
-#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED               (0x07)
-#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED               (0x08)
-
-/* SAS Notify Primitive Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
-	U8                      PhyNum;                     /* 0x00 */
-	U8                      Port;                       /* 0x01 */
-	U8                      Reserved1;                  /* 0x02 */
-	U8                      Primitive;                  /* 0x03 */
-} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
-MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
-Mpi2EventDataSasNotifyPrimitive_t,
-MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t;
-
-/* defines for the Primitive field */
-#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP                     (0x01)
-#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED               (0x02)
-#define MPI2_EVENT_NOTIFY_RESERVED1                         (0x03)
-#define MPI2_EVENT_NOTIFY_RESERVED2                         (0x04)
-
-
-/* SAS Initiator Device Status Change Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE
-{
-    U8                      ReasonCode;                 /* 0x00 */
-    U8                      PhysicalPort;               /* 0x01 */
-    U16                     DevHandle;                  /* 0x02 */
-    U64                     SASAddress;                 /* 0x04 */
-} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
-  Mpi2EventDataSasInitDevStatusChange_t,
-  MPI2_POINTER pMpi2EventDataSasInitDevStatusChange_t;
-
-/* SAS Initiator Device Status Change event ReasonCode values */
-#define MPI2_EVENT_SAS_INIT_RC_ADDED                (0x01)
-#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING       (0x02)
-
-
-/* SAS Initiator Device Table Overflow Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW
-{
-    U16                     MaxInit;                    /* 0x00 */
-    U16                     CurrentInit;                /* 0x02 */
-    U64                     SASAddress;                 /* 0x04 */
-} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
-  Mpi2EventDataSasInitTableOverflow_t,
-  MPI2_POINTER pMpi2EventDataSasInitTableOverflow_t;
-
-
-/* SAS Topology Change List Event data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumEntries at runtime.
- */
-#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
-#define MPI2_EVENT_SAS_TOPO_PHY_COUNT           (1)
-#endif
-
-typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY
-{
-    U16                     AttachedDevHandle;          /* 0x00 */
-    U8                      LinkRate;                   /* 0x02 */
-    U8                      PhyStatus;                  /* 0x03 */
-} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, MPI2_POINTER PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY,
-  Mpi2EventSasTopoPhyEntry_t, MPI2_POINTER pMpi2EventSasTopoPhyEntry_t;
-
-typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST
-{
-    U16                             EnclosureHandle;            /* 0x00 */
-    U16                             ExpanderDevHandle;          /* 0x02 */
-    U8                              NumPhys;                    /* 0x04 */
-    U8                              Reserved1;                  /* 0x05 */
-    U16                             Reserved2;                  /* 0x06 */
-    U8                              NumEntries;                 /* 0x08 */
-    U8                              StartPhyNum;                /* 0x09 */
-    U8                              ExpStatus;                  /* 0x0A */
-    U8                              PhysicalPort;               /* 0x0B */
-    MPI2_EVENT_SAS_TOPO_PHY_ENTRY   PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C*/
-} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
-  Mpi2EventDataSasTopologyChangeList_t,
-  MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t;
-
-/* values for the ExpStatus field */
-#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER                  (0x00)
-#define MPI2_EVENT_SAS_TOPO_ES_ADDED                        (0x01)
-#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING               (0x02)
-#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING                   (0x03)
-#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING         (0x04)
-
-/* defines for the LinkRate field */
-#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK                 (0xF0)
-#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT                (4)
-#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK                    (0x0F)
-#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT                   (0)
-
-#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE            (0x00)
-#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED                 (0x01)
-#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED           (0x02)
-#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE            (0x03)
-#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR                (0x04)
-#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS        (0x05)
-#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY              (0x06)
-#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5                     (0x08)
-#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0                     (0x09)
-#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0                     (0x0A)
-
-/* values for the PhyStatus field */
-#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT                (0x80)
-#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE             (0x10)
-/* values for the PhyStatus ReasonCode sub-field */
-#define MPI2_EVENT_SAS_TOPO_RC_MASK                         (0x0F)
-#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED                   (0x01)
-#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING          (0x02)
-#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED                  (0x03)
-#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE                    (0x04)
-#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING         (0x05)
-
-
-/* SAS Enclosure Device Status Change Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE
-{
-    U16                     EnclosureHandle;            /* 0x00 */
-    U8                      ReasonCode;                 /* 0x02 */
-    U8                      PhysicalPort;               /* 0x03 */
-    U64                     EnclosureLogicalID;         /* 0x04 */
-    U16                     NumSlots;                   /* 0x0C */
-    U16                     StartSlot;                  /* 0x0E */
-    U32                     PhyBits;                    /* 0x10 */
-} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
-  Mpi2EventDataSasEnclDevStatusChange_t,
-  MPI2_POINTER pMpi2EventDataSasEnclDevStatusChange_t;
-
-/* SAS Enclosure Device Status Change event ReasonCode values */
-#define MPI2_EVENT_SAS_ENCL_RC_ADDED                (0x01)
-#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING       (0x02)
-
-
-/* SAS PHY Counter Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
-    U64         TimeStamp;          /* 0x00 */
-    U32         Reserved1;          /* 0x08 */
-    U8          PhyEventCode;       /* 0x0C */
-    U8          PhyNum;             /* 0x0D */
-    U16         Reserved2;          /* 0x0E */
-    U32         PhyEventInfo;       /* 0x10 */
-    U8          CounterType;        /* 0x14 */
-    U8          ThresholdWindow;    /* 0x15 */
-    U8          TimeUnits;          /* 0x16 */
-    U8          Reserved3;          /* 0x17 */
-    U32         EventThreshold;     /* 0x18 */
-    U16         ThresholdFlags;     /* 0x1C */
-    U16         Reserved4;          /* 0x1E */
-} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
-  Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t;
-
-/* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the
- * PhyEventCode field
- * use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the
- * CounterType field
- * use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the
- * TimeUnits field
- * use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the
- * ThresholdFlags field
- * */
-
-
-/* SAS Quiesce Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
-    U8                      ReasonCode;                 /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U16                     Reserved2;                  /* 0x02 */
-    U32                     Reserved3;                  /* 0x04 */
-} MPI2_EVENT_DATA_SAS_QUIESCE,
-  MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
-  Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t;
-
-/* SAS Quiesce Event data ReasonCode values */
-#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED                   (0x01)
-#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED                 (0x02)
-
-
-/* Host Based Discovery Phy Event data */
-
-typedef struct _MPI2_EVENT_HBD_PHY_SAS {
-    U8          Flags;                      /* 0x00 */
-    U8          NegotiatedLinkRate;         /* 0x01 */
-    U8          PhyNum;                     /* 0x02 */
-    U8          PhysicalPort;               /* 0x03 */
-    U32         Reserved1;                  /* 0x04 */
-    U8          InitialFrame[28];           /* 0x08 */
-} MPI2_EVENT_HBD_PHY_SAS, MPI2_POINTER PTR_MPI2_EVENT_HBD_PHY_SAS,
-  Mpi2EventHbdPhySas_t, MPI2_POINTER pMpi2EventHbdPhySas_t;
-
-/* values for the Flags field */
-#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID        (0x02)
-#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME         (0x01)
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h for
- * the NegotiatedLinkRate field */
-
-typedef union _MPI2_EVENT_HBD_DESCRIPTOR {
-    MPI2_EVENT_HBD_PHY_SAS      Sas;
-} MPI2_EVENT_HBD_DESCRIPTOR, MPI2_POINTER PTR_MPI2_EVENT_HBD_DESCRIPTOR,
-  Mpi2EventHbdDescriptor_t, MPI2_POINTER pMpi2EventHbdDescriptor_t;
-
-typedef struct _MPI2_EVENT_DATA_HBD_PHY {
-    U8                          DescriptorType;     /* 0x00 */
-    U8                          Reserved1;          /* 0x01 */
-    U16                         Reserved2;          /* 0x02 */
-    U32                         Reserved3;          /* 0x04 */
-    MPI2_EVENT_HBD_DESCRIPTOR   Descriptor;         /* 0x08 */
-} MPI2_EVENT_DATA_HBD_PHY, MPI2_POINTER PTR_MPI2_EVENT_DATA_HBD_PHY,
-  Mpi2EventDataHbdPhy_t, MPI2_POINTER pMpi2EventDataMpi2EventDataHbdPhy_t;
-
-/* values for the DescriptorType field */
-#define MPI2_EVENT_HBD_DT_SAS               (0x01)
-
-
-
-/****************************************************************************
-*  EventAck message
-****************************************************************************/
-
-/* EventAck Request message */
-typedef struct _MPI2_EVENT_ACK_REQUEST
-{
-    U16                     Reserved1;                      /* 0x00 */
-    U8                      ChainOffset;                    /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     Reserved2;                      /* 0x04 */
-    U8                      Reserved3;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved4;                      /* 0x0A */
-    U16                     Event;                          /* 0x0C */
-    U16                     Reserved5;                      /* 0x0E */
-    U32                     EventContext;                   /* 0x10 */
-} MPI2_EVENT_ACK_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_ACK_REQUEST,
-  Mpi2EventAckRequest_t, MPI2_POINTER pMpi2EventAckRequest_t;
-
-
-/* EventAck Reply message */
-typedef struct _MPI2_EVENT_ACK_REPLY
-{
-    U16                     Reserved1;                      /* 0x00 */
-    U8                      MsgLength;                      /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     Reserved2;                      /* 0x04 */
-    U8                      Reserved3;                      /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved4;                      /* 0x0A */
-    U16                     Reserved5;                      /* 0x0C */
-    U16                     IOCStatus;                      /* 0x0E */
-    U32                     IOCLogInfo;                     /* 0x10 */
-} MPI2_EVENT_ACK_REPLY, MPI2_POINTER PTR_MPI2_EVENT_ACK_REPLY,
-  Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t;
-
-
-/****************************************************************************
-*  SendHostMessage message
-****************************************************************************/
-
-/* SendHostMessage Request message */
-typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
-	U16                     HostDataLength;                 /* 0x00 */
-	U8                      ChainOffset;                    /* 0x02 */
-	U8                      Function;                       /* 0x03 */
-	U16                     Reserved1;                      /* 0x04 */
-	U8                      Reserved2;                      /* 0x06 */
-	U8                      MsgFlags;                       /* 0x07 */
-	U8                      VP_ID;                          /* 0x08 */
-	U8                      VF_ID;                          /* 0x09 */
-	U16                     Reserved3;                      /* 0x0A */
-	U8                      Reserved4;                      /* 0x0C */
-	U8                      DestVF_ID;                      /* 0x0D */
-	U16                     Reserved5;                      /* 0x0E */
-	U32                     Reserved6;                      /* 0x10 */
-	U32                     Reserved7;                      /* 0x14 */
-	U32                     Reserved8;                      /* 0x18 */
-	U32                     Reserved9;                      /* 0x1C */
-	U32                     Reserved10;                     /* 0x20 */
-	U32                     HostData[1];                    /* 0x24 */
-} MPI2_SEND_HOST_MESSAGE_REQUEST,
-MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
-Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t;
-
-
-/* SendHostMessage Reply message */
-typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
-	U16                     HostDataLength;                 /* 0x00 */
-	U8                      MsgLength;                      /* 0x02 */
-	U8                      Function;                       /* 0x03 */
-	U16                     Reserved1;                      /* 0x04 */
-	U8                      Reserved2;                      /* 0x06 */
-	U8                      MsgFlags;                       /* 0x07 */
-	U8                      VP_ID;                          /* 0x08 */
-	U8                      VF_ID;                          /* 0x09 */
-	U16                     Reserved3;                      /* 0x0A */
-	U16                     Reserved4;                      /* 0x0C */
-	U16                     IOCStatus;                      /* 0x0E */
-	U32                     IOCLogInfo;                     /* 0x10 */
-} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
-Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t;
-
-
-/****************************************************************************
-*  FWDownload message
-****************************************************************************/
-
-/* FWDownload Request message */
-typedef struct _MPI2_FW_DOWNLOAD_REQUEST
-{
-    U8                      ImageType;                  /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      ChainOffset;                /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U32                     TotalImageSize;             /* 0x0C */
-    U32                     Reserved5;                  /* 0x10 */
-    MPI2_MPI_SGE_UNION      SGL;                        /* 0x14 */
-} MPI2_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REQUEST,
-  Mpi2FWDownloadRequest, MPI2_POINTER pMpi2FWDownloadRequest;
-
-#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT   (0x01)
-
-#define MPI2_FW_DOWNLOAD_ITYPE_FW                   (0x01)
-#define MPI2_FW_DOWNLOAD_ITYPE_BIOS                 (0x02)
-#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING        (0x06)
-#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1             (0x07)
-#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2             (0x08)
-#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID             (0x09)
-#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE             (0x0A)
-#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK    (0x0B)
-#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY           (0x0C)
-#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
-
-/* FWDownload TransactionContext Element */
-typedef struct _MPI2_FW_DOWNLOAD_TCSGE
-{
-    U8                      Reserved1;                  /* 0x00 */
-    U8                      ContextSize;                /* 0x01 */
-    U8                      DetailsLength;              /* 0x02 */
-    U8                      Flags;                      /* 0x03 */
-    U32                     Reserved2;                  /* 0x04 */
-    U32                     ImageOffset;                /* 0x08 */
-    U32                     ImageSize;                  /* 0x0C */
-} MPI2_FW_DOWNLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_TCSGE,
-  Mpi2FWDownloadTCSGE_t, MPI2_POINTER pMpi2FWDownloadTCSGE_t;
-
-/* FWDownload Reply message */
-typedef struct _MPI2_FW_DOWNLOAD_REPLY
-{
-    U8                      ImageType;                  /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      MsgLength;                  /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U16                     Reserved5;                  /* 0x0C */
-    U16                     IOCStatus;                  /* 0x0E */
-    U32                     IOCLogInfo;                 /* 0x10 */
-} MPI2_FW_DOWNLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REPLY,
-  Mpi2FWDownloadReply_t, MPI2_POINTER pMpi2FWDownloadReply_t;
-
-
-/****************************************************************************
-*  FWUpload message
-****************************************************************************/
-
-/* FWUpload Request message */
-typedef struct _MPI2_FW_UPLOAD_REQUEST
-{
-    U8                      ImageType;                  /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      ChainOffset;                /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U32                     Reserved5;                  /* 0x0C */
-    U32                     Reserved6;                  /* 0x10 */
-    MPI2_MPI_SGE_UNION      SGL;                        /* 0x14 */
-} MPI2_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REQUEST,
-  Mpi2FWUploadRequest_t, MPI2_POINTER pMpi2FWUploadRequest_t;
-
-#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT         (0x00)
-#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH           (0x01)
-#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH         (0x02)
-#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP          (0x05)
-#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING      (0x06)
-#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1           (0x07)
-#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2           (0x08)
-#define MPI2_FW_UPLOAD_ITYPE_MEGARAID           (0x09)
-#define MPI2_FW_UPLOAD_ITYPE_COMPLETE           (0x0A)
-#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK  (0x0B)
-
-typedef struct _MPI2_FW_UPLOAD_TCSGE
-{
-    U8                      Reserved1;                  /* 0x00 */
-    U8                      ContextSize;                /* 0x01 */
-    U8                      DetailsLength;              /* 0x02 */
-    U8                      Flags;                      /* 0x03 */
-    U32                     Reserved2;                  /* 0x04 */
-    U32                     ImageOffset;                /* 0x08 */
-    U32                     ImageSize;                  /* 0x0C */
-} MPI2_FW_UPLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_UPLOAD_TCSGE,
-  Mpi2FWUploadTCSGE_t, MPI2_POINTER pMpi2FWUploadTCSGE_t;
-
-/* FWUpload Reply message */
-typedef struct _MPI2_FW_UPLOAD_REPLY
-{
-    U8                      ImageType;                  /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      MsgLength;                  /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U16                     Reserved5;                  /* 0x0C */
-    U16                     IOCStatus;                  /* 0x0E */
-    U32                     IOCLogInfo;                 /* 0x10 */
-    U32                     ActualImageSize;            /* 0x14 */
-} MPI2_FW_UPLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REPLY,
-  Mpi2FWUploadReply_t, MPI2_POINTER pMPi2FWUploadReply_t;
-
-
-/* FW Image Header */
-typedef struct _MPI2_FW_IMAGE_HEADER
-{
-    U32                     Signature;                  /* 0x00 */
-    U32                     Signature0;                 /* 0x04 */
-    U32                     Signature1;                 /* 0x08 */
-    U32                     Signature2;                 /* 0x0C */
-    MPI2_VERSION_UNION      MPIVersion;                 /* 0x10 */
-    MPI2_VERSION_UNION      FWVersion;                  /* 0x14 */
-    MPI2_VERSION_UNION      NVDATAVersion;              /* 0x18 */
-    MPI2_VERSION_UNION      PackageVersion;             /* 0x1C */
-    U16                     VendorID;                   /* 0x20 */
-    U16                     ProductID;                  /* 0x22 */
-    U16                     ProtocolFlags;              /* 0x24 */
-    U16                     Reserved26;                 /* 0x26 */
-    U32                     IOCCapabilities;            /* 0x28 */
-    U32                     ImageSize;                  /* 0x2C */
-    U32                     NextImageHeaderOffset;      /* 0x30 */
-    U32                     Checksum;                   /* 0x34 */
-    U32                     Reserved38;                 /* 0x38 */
-    U32                     Reserved3C;                 /* 0x3C */
-    U32                     Reserved40;                 /* 0x40 */
-    U32                     Reserved44;                 /* 0x44 */
-    U32                     Reserved48;                 /* 0x48 */
-    U32                     Reserved4C;                 /* 0x4C */
-    U32                     Reserved50;                 /* 0x50 */
-    U32                     Reserved54;                 /* 0x54 */
-    U32                     Reserved58;                 /* 0x58 */
-    U32                     Reserved5C;                 /* 0x5C */
-    U32                     Reserved60;                 /* 0x60 */
-    U32                     FirmwareVersionNameWhat;    /* 0x64 */
-    U8                      FirmwareVersionName[32];    /* 0x68 */
-    U32                     VendorNameWhat;             /* 0x88 */
-    U8                      VendorName[32];             /* 0x8C */
-    U32                     PackageNameWhat;            /* 0x88 */
-    U8                      PackageName[32];            /* 0x8C */
-    U32                     ReservedD0;                 /* 0xD0 */
-    U32                     ReservedD4;                 /* 0xD4 */
-    U32                     ReservedD8;                 /* 0xD8 */
-    U32                     ReservedDC;                 /* 0xDC */
-    U32                     ReservedE0;                 /* 0xE0 */
-    U32                     ReservedE4;                 /* 0xE4 */
-    U32                     ReservedE8;                 /* 0xE8 */
-    U32                     ReservedEC;                 /* 0xEC */
-    U32                     ReservedF0;                 /* 0xF0 */
-    U32                     ReservedF4;                 /* 0xF4 */
-    U32                     ReservedF8;                 /* 0xF8 */
-    U32                     ReservedFC;                 /* 0xFC */
-} MPI2_FW_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_FW_IMAGE_HEADER,
-  Mpi2FWImageHeader_t, MPI2_POINTER pMpi2FWImageHeader_t;
-
-/* Signature field */
-#define MPI2_FW_HEADER_SIGNATURE_OFFSET         (0x00)
-#define MPI2_FW_HEADER_SIGNATURE_MASK           (0xFF000000)
-#define MPI2_FW_HEADER_SIGNATURE                (0xEA000000)
-
-/* Signature0 field */
-#define MPI2_FW_HEADER_SIGNATURE0_OFFSET        (0x04)
-#define MPI2_FW_HEADER_SIGNATURE0               (0x5AFAA55A)
-
-/* Signature1 field */
-#define MPI2_FW_HEADER_SIGNATURE1_OFFSET        (0x08)
-#define MPI2_FW_HEADER_SIGNATURE1               (0xA55AFAA5)
-
-/* Signature2 field */
-#define MPI2_FW_HEADER_SIGNATURE2_OFFSET        (0x0C)
-#define MPI2_FW_HEADER_SIGNATURE2               (0x5AA55AFA)
-
-
-/* defines for using the ProductID field */
-#define MPI2_FW_HEADER_PID_TYPE_MASK            (0xF000)
-#define MPI2_FW_HEADER_PID_TYPE_SAS             (0x2000)
-
-#define MPI2_FW_HEADER_PID_PROD_MASK                    (0x0F00)
-#define MPI2_FW_HEADER_PID_PROD_A                       (0x0000)
-#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI   (0x0200)
-#define MPI2_FW_HEADER_PID_PROD_IR_SCSI                 (0x0700)
-
-
-#define MPI2_FW_HEADER_PID_FAMILY_MASK          (0x00FF)
-/* SAS */
-#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS      (0x0013)
-#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS      (0x0014)
-
-/* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
-
-/* use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
-
-
-#define MPI2_FW_HEADER_IMAGESIZE_OFFSET         (0x2C)
-#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET         (0x30)
-#define MPI2_FW_HEADER_VERNMHWAT_OFFSET         (0x64)
-
-#define MPI2_FW_HEADER_WHAT_SIGNATURE           (0x29232840)
-
-#define MPI2_FW_HEADER_SIZE                     (0x100)
-
-
-/* Extended Image Header */
-typedef struct _MPI2_EXT_IMAGE_HEADER
-
-{
-    U8                      ImageType;                  /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U16                     Reserved2;                  /* 0x02 */
-    U32                     Checksum;                   /* 0x04 */
-    U32                     ImageSize;                  /* 0x08 */
-    U32                     NextImageHeaderOffset;      /* 0x0C */
-    U32                     PackageVersion;             /* 0x10 */
-    U32                     Reserved3;                  /* 0x14 */
-    U32                     Reserved4;                  /* 0x18 */
-    U32                     Reserved5;                  /* 0x1C */
-    U8                      IdentifyString[32];         /* 0x20 */
-} MPI2_EXT_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_EXT_IMAGE_HEADER,
-  Mpi2ExtImageHeader_t, MPI2_POINTER pMpi2ExtImageHeader_t;
-
-/* useful offsets */
-#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET         (0x00)
-#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET         (0x08)
-#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET         (0x0C)
-
-#define MPI2_EXT_IMAGE_HEADER_SIZE              (0x40)
-
-/* defines for the ImageType field */
-#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED             (0x00)
-#define MPI2_EXT_IMAGE_TYPE_FW                      (0x01)
-#define MPI2_EXT_IMAGE_TYPE_NVDATA                  (0x03)
-#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER              (0x04)
-#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION          (0x05)
-#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT            (0x06)
-#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES       (0x07)
-#define MPI2_EXT_IMAGE_TYPE_MEGARAID                (0x08)
-#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH          (0x09)
-#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC    (0x80)
-#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC    (0xFF)
-#define MPI2_EXT_IMAGE_TYPE_MAX                   \
-	(MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC)	/* deprecated */
-
-
-
-/* FLASH Layout Extended Image Data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check RegionsPerLayout at runtime.
- */
-#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
-#define MPI2_FLASH_NUMBER_OF_REGIONS        (1)
-#endif
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumberOfLayouts at runtime.
- */
-#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
-#define MPI2_FLASH_NUMBER_OF_LAYOUTS        (1)
-#endif
-
-typedef struct _MPI2_FLASH_REGION
-{
-    U8                      RegionType;                 /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U16                     Reserved2;                  /* 0x02 */
-    U32                     RegionOffset;               /* 0x04 */
-    U32                     RegionSize;                 /* 0x08 */
-    U32                     Reserved3;                  /* 0x0C */
-} MPI2_FLASH_REGION, MPI2_POINTER PTR_MPI2_FLASH_REGION,
-  Mpi2FlashRegion_t, MPI2_POINTER pMpi2FlashRegion_t;
-
-typedef struct _MPI2_FLASH_LAYOUT
-{
-    U32                     FlashSize;                  /* 0x00 */
-    U32                     Reserved1;                  /* 0x04 */
-    U32                     Reserved2;                  /* 0x08 */
-    U32                     Reserved3;                  /* 0x0C */
-    MPI2_FLASH_REGION       Region[MPI2_FLASH_NUMBER_OF_REGIONS];/* 0x10 */
-} MPI2_FLASH_LAYOUT, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT,
-  Mpi2FlashLayout_t, MPI2_POINTER pMpi2FlashLayout_t;
-
-typedef struct _MPI2_FLASH_LAYOUT_DATA
-{
-    U8                      ImageRevision;              /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      SizeOfRegion;               /* 0x02 */
-    U8                      Reserved2;                  /* 0x03 */
-    U16                     NumberOfLayouts;            /* 0x04 */
-    U16                     RegionsPerLayout;           /* 0x06 */
-    U16                     MinimumSectorAlignment;     /* 0x08 */
-    U16                     Reserved3;                  /* 0x0A */
-    U32                     Reserved4;                  /* 0x0C */
-    MPI2_FLASH_LAYOUT       Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS];/* 0x10 */
-} MPI2_FLASH_LAYOUT_DATA, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT_DATA,
-  Mpi2FlashLayoutData_t, MPI2_POINTER pMpi2FlashLayoutData_t;
-
-/* defines for the RegionType field */
-#define MPI2_FLASH_REGION_UNUSED                (0x00)
-#define MPI2_FLASH_REGION_FIRMWARE              (0x01)
-#define MPI2_FLASH_REGION_BIOS                  (0x02)
-#define MPI2_FLASH_REGION_NVDATA                (0x03)
-#define MPI2_FLASH_REGION_FIRMWARE_BACKUP       (0x05)
-#define MPI2_FLASH_REGION_MFG_INFORMATION       (0x06)
-#define MPI2_FLASH_REGION_CONFIG_1              (0x07)
-#define MPI2_FLASH_REGION_CONFIG_2              (0x08)
-#define MPI2_FLASH_REGION_MEGARAID              (0x09)
-#define MPI2_FLASH_REGION_INIT                  (0x0A)
-
-/* ImageRevision */
-#define MPI2_FLASH_LAYOUT_IMAGE_REVISION        (0x00)
-
-
-
-/* Supported Devices Extended Image Data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumberOfDevices at runtime.
- */
-#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
-#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES    (1)
-#endif
-
-typedef struct _MPI2_SUPPORTED_DEVICE
-{
-    U16                     DeviceID;                   /* 0x00 */
-    U16                     VendorID;                   /* 0x02 */
-    U16                     DeviceIDMask;               /* 0x04 */
-    U16                     Reserved1;                  /* 0x06 */
-    U8                      LowPCIRev;                  /* 0x08 */
-    U8                      HighPCIRev;                 /* 0x09 */
-    U16                     Reserved2;                  /* 0x0A */
-    U32                     Reserved3;                  /* 0x0C */
-} MPI2_SUPPORTED_DEVICE, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICE,
-  Mpi2SupportedDevice_t, MPI2_POINTER pMpi2SupportedDevice_t;
-
-typedef struct _MPI2_SUPPORTED_DEVICES_DATA
-{
-    U8                      ImageRevision;              /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      NumberOfDevices;            /* 0x02 */
-    U8                      Reserved2;                  /* 0x03 */
-    U32                     Reserved3;                  /* 0x04 */
-    MPI2_SUPPORTED_DEVICE   SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES]; /* 0x08 */
-} MPI2_SUPPORTED_DEVICES_DATA, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICES_DATA,
-  Mpi2SupportedDevicesData_t, MPI2_POINTER pMpi2SupportedDevicesData_t;
-
-/* ImageRevision */
-#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION   (0x00)
-
-
-/* Init Extended Image Data */
-
-typedef struct _MPI2_INIT_IMAGE_FOOTER
-
-{
-    U32                     BootFlags;                  /* 0x00 */
-    U32                     ImageSize;                  /* 0x04 */
-    U32                     Signature0;                 /* 0x08 */
-    U32                     Signature1;                 /* 0x0C */
-    U32                     Signature2;                 /* 0x10 */
-    U32                     ResetVector;                /* 0x14 */
-} MPI2_INIT_IMAGE_FOOTER, MPI2_POINTER PTR_MPI2_INIT_IMAGE_FOOTER,
-  Mpi2InitImageFooter_t, MPI2_POINTER pMpi2InitImageFooter_t;
-
-/* defines for the BootFlags field */
-#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET        (0x00)
-
-/* defines for the ImageSize field */
-#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET        (0x04)
-
-/* defines for the Signature0 field */
-#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET       (0x08)
-#define MPI2_INIT_IMAGE_SIGNATURE0              (0x5AA55AEA)
-
-/* defines for the Signature1 field */
-#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET       (0x0C)
-#define MPI2_INIT_IMAGE_SIGNATURE1              (0xA55AEAA5)
-
-/* defines for the Signature2 field */
-#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET       (0x10)
-#define MPI2_INIT_IMAGE_SIGNATURE2              (0x5AEAA55A)
-
-/* Signature fields as individual bytes */
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0        (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1        (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2        (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3        (0x5A)
-
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4        (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5        (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6        (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7        (0xA5)
-
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8        (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9        (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A        (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B        (0x5A)
-
-/* defines for the ResetVector field */
-#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET      (0x14)
-
-
-/* Encrypted Hash Extended Image Data */
-
-typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
-	U8                  HashImageType;          /* 0x00 */
-	U8                  HashAlgorithm;          /* 0x01 */
-	U8                  EncryptionAlgorithm;    /* 0x02 */
-	U8                  Reserved1;              /* 0x03 */
-	U32                 Reserved2;              /* 0x04 */
-	U32                 EncryptedHash[1];       /* 0x08 */
-} MPI25_ENCRYPTED_HASH_ENTRY, MPI2_POINTER PTR_MPI25_ENCRYPTED_HASH_ENTRY,
-Mpi25EncryptedHashEntry_t, MPI2_POINTER pMpi25EncryptedHashEntry_t;
-
-/* values for HashImageType */
-#define MPI25_HASH_IMAGE_TYPE_UNUSED            (0x00)
-#define MPI25_HASH_IMAGE_TYPE_FIRMWARE          (0x01)
-#define MPI25_HASH_IMAGE_TYPE_BIOS              (0x02)
-
-/* values for HashAlgorithm */
-#define MPI25_HASH_ALGORITHM_UNUSED             (0x00)
-#define MPI25_HASH_ALGORITHM_SHA256             (0x01)
-
-/* values for EncryptionAlgorithm */
-#define MPI25_ENCRYPTION_ALG_UNUSED             (0x00)
-#define MPI25_ENCRYPTION_ALG_RSA256             (0x01)
-
-typedef struct _MPI25_ENCRYPTED_HASH_DATA {
-	U8                              ImageVersion;           /* 0x00 */
-	U8                              NumHash;                /* 0x01 */
-	U16                             Reserved1;              /* 0x02 */
-	U32                             Reserved2;              /* 0x04 */
-	MPI25_ENCRYPTED_HASH_ENTRY      EncryptedHashEntry[1];  /* 0x08 */
-} MPI25_ENCRYPTED_HASH_DATA, MPI2_POINTER PTR_MPI25_ENCRYPTED_HASH_DATA,
-Mpi25EncryptedHashData_t, MPI2_POINTER pMpi25EncryptedHashData_t;
-
-/****************************************************************************
-*  PowerManagementControl message
-****************************************************************************/
-
-/* PowerManagementControl Request message */
-typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
-    U8                      Feature;                    /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      ChainOffset;                /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U8                      Parameter1;                 /* 0x0C */
-    U8                      Parameter2;                 /* 0x0D */
-    U8                      Parameter3;                 /* 0x0E */
-    U8                      Parameter4;                 /* 0x0F */
-    U32                     Reserved5;                  /* 0x10 */
-    U32                     Reserved6;                  /* 0x14 */
-} MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
-  Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t;
-
-/* defines for the Feature field */
-#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND       (0x01)
-#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION   (0x02)
-#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK               (0x03) /* obsolete */
-#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED               (0x04)
-#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC    (0x80)
-#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC    (0xFF)
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
-/* Parameter1 contains a PHY number */
-/* Parameter2 indicates power condition action using these defines */
-#define MPI2_PM_CONTROL_PARAM2_PARTIAL                  (0x01)
-#define MPI2_PM_CONTROL_PARAM2_SLUMBER                  (0x02)
-#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT            (0x03)
-/* Parameter3 and Parameter4 are reserved */
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
- *  Feature */
-/* Parameter1 contains SAS port width modulation group number */
-/* Parameter2 indicates IOC action using these defines */
-#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP        (0x01)
-#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION        (0x02)
-#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP     (0x03)
-/* Parameter3 indicates desired modulation level using these defines */
-#define MPI2_PM_CONTROL_PARAM3_25_PERCENT               (0x00)
-#define MPI2_PM_CONTROL_PARAM3_50_PERCENT               (0x01)
-#define MPI2_PM_CONTROL_PARAM3_75_PERCENT               (0x02)
-#define MPI2_PM_CONTROL_PARAM3_100_PERCENT              (0x03)
-/* Parameter4 is reserved */
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
-/* Parameter1 indicates desired PCIe link speed using these defines */
-#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS            (0x00) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS            (0x01) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS            (0x02) /* obsolete */
-/* Parameter2 indicates desired PCIe link width using these defines */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1                 (0x01) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2                 (0x02) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4                 (0x04) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8                 (0x08) /* obsolete */
-/* Parameter3 and Parameter4 are reserved */
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
-/* Parameter1 indicates desired IOC hardware clock speed using these defines */
-#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED           (0x01)
-#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED           (0x02)
-#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED        (0x04)
-#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED         (0x08)
-/* Parameter2, Parameter3, and Parameter4 are reserved */
-
-
-/* PowerManagementControl Reply message */
-typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
-    U8                      Feature;                    /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      MsgLength;                  /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U16                     Reserved5;                  /* 0x0C */
-    U16                     IOCStatus;                  /* 0x0E */
-    U32                     IOCLogInfo;                 /* 0x10 */
-} MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
-  Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t;
-
-
-#endif
-
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h
deleted file mode 100644
index 7efa58ff0..000000000
--- a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- *  Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- *           Name:  mpi2_raid.h
- *          Title:  MPI Integrated RAID messages and structures
- *  Creation Date:  April 26, 2007
- *
- *    mpi2_raid.h Version:  02.00.10
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  08-31-07  02.00.01  Modifications to RAID Action request and reply,
- *                      including the Actions and ActionData.
- *  02-29-08  02.00.02  Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
- *  05-21-08  02.00.03  Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
- *                      the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
- *                      can be sized by the build environment.
- *  07-30-09  02.00.04  Added proper define for the Use Default Settings bit of
- *                      VolumeCreationFlags and marked the old one as obsolete.
- *  05-12-10  02.00.05  Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
- *  08-24-10  02.00.06  Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with
- *                      related structures and defines.
- *                      Added product-specific range to RAID Action values.
- *  02-06-12  02.00.08  Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
- *  07-26-12  02.00.09  Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
- *                      Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
- *  04-17-13  02.00.10  Added MPI25_RAID_ACTION_ADATA_ALLOW_PI.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_RAID_H
-#define MPI2_RAID_H
-
-/*****************************************************************************
-*
-*               Integrated RAID Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-*  RAID Action messages
-****************************************************************************/
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_CREATE_VOLUME action */
-#define MPI25_RAID_ACTION_ADATA_ALLOW_PI            (0x80000000)
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */
-#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0            (0x00000000)
-#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0            (0x00000001)
-
-/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */
-#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD  (0x00000001)
-
-/* ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */
-typedef struct _MPI2_RAID_ACTION_RATE_DATA
-{
-    U8              RateToChange;               /* 0x00 */
-    U8              RateOrMode;                 /* 0x01 */
-    U16             DataScrubDuration;          /* 0x02 */
-} MPI2_RAID_ACTION_RATE_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_RATE_DATA,
-  Mpi2RaidActionRateData_t, MPI2_POINTER pMpi2RaidActionRateData_t;
-
-#define MPI2_RAID_ACTION_SET_RATE_RESYNC            (0x00)
-#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB        (0x01)
-#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE    (0x02)
-
-/* ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */
-typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION
-{
-    U8              RAIDFunction;                       /* 0x00 */
-    U8              Flags;                              /* 0x01 */
-    U16             Reserved1;                          /* 0x02 */
-} MPI2_RAID_ACTION_START_RAID_FUNCTION,
-  MPI2_POINTER PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION,
-  Mpi2RaidActionStartRaidFunction_t,
-  MPI2_POINTER pMpi2RaidActionStartRaidFunction_t;
-
-/* defines for the RAIDFunction field */
-#define MPI2_RAID_ACTION_START_BACKGROUND_INIT      (0x00)
-#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01)
-#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK    (0x02)
-
-/* defines for the Flags field */
-#define MPI2_RAID_ACTION_START_NEW                  (0x00)
-#define MPI2_RAID_ACTION_START_RESUME               (0x01)
-
-/* ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */
-typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION
-{
-    U8              RAIDFunction;                       /* 0x00 */
-    U8              Flags;                              /* 0x01 */
-    U16             Reserved1;                          /* 0x02 */
-} MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
-  MPI2_POINTER PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
-  Mpi2RaidActionStopRaidFunction_t,
-  MPI2_POINTER pMpi2RaidActionStopRaidFunction_t;
-
-/* defines for the RAIDFunction field */
-#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT       (0x00)
-#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION  (0x01)
-#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK     (0x02)
-
-/* defines for the Flags field */
-#define MPI2_RAID_ACTION_STOP_ABORT                 (0x00)
-#define MPI2_RAID_ACTION_STOP_PAUSE                 (0x01)
-
-/* ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */
-typedef struct _MPI2_RAID_ACTION_HOT_SPARE
-{
-    U8              HotSparePool;               /* 0x00 */
-    U8              Reserved1;                  /* 0x01 */
-    U16             DevHandle;                  /* 0x02 */
-} MPI2_RAID_ACTION_HOT_SPARE, MPI2_POINTER PTR_MPI2_RAID_ACTION_HOT_SPARE,
-  Mpi2RaidActionHotSpare_t, MPI2_POINTER pMpi2RaidActionHotSpare_t;
-
-/* ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */
-typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE
-{
-    U8              Flags;                              /* 0x00 */
-    U8              DeviceFirmwareUpdateModeTimeout;    /* 0x01 */
-    U16             Reserved1;                          /* 0x02 */
-} MPI2_RAID_ACTION_FW_UPDATE_MODE,
-  MPI2_POINTER PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE,
-  Mpi2RaidActionFwUpdateMode_t, MPI2_POINTER pMpi2RaidActionFwUpdateMode_t;
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
-#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE        (0x00)
-#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE         (0x01)
-
-typedef union _MPI2_RAID_ACTION_DATA
-{
-    U32                                     Word;
-    MPI2_RAID_ACTION_RATE_DATA              Rates;
-    MPI2_RAID_ACTION_START_RAID_FUNCTION    StartRaidFunction;
-    MPI2_RAID_ACTION_STOP_RAID_FUNCTION     StopRaidFunction;
-    MPI2_RAID_ACTION_HOT_SPARE              HotSpare;
-    MPI2_RAID_ACTION_FW_UPDATE_MODE         FwUpdateMode;
-} MPI2_RAID_ACTION_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_DATA,
-  Mpi2RaidActionData_t, MPI2_POINTER pMpi2RaidActionData_t;
-
-
-/* RAID Action Request Message */
-typedef struct _MPI2_RAID_ACTION_REQUEST
-{
-    U8                      Action;                         /* 0x00 */
-    U8                      Reserved1;                      /* 0x01 */
-    U8                      ChainOffset;                    /* 0x02 */
-    U8                      Function;                       /* 0x03 */
-    U16                     VolDevHandle;                   /* 0x04 */
-    U8                      PhysDiskNum;                    /* 0x06 */
-    U8                      MsgFlags;                       /* 0x07 */
-    U8                      VP_ID;                          /* 0x08 */
-    U8                      VF_ID;                          /* 0x09 */
-    U16                     Reserved2;                      /* 0x0A */
-    U32                     Reserved3;                      /* 0x0C */
-    MPI2_RAID_ACTION_DATA   ActionDataWord;                 /* 0x10 */
-    MPI2_SGE_SIMPLE_UNION   ActionDataSGE;                  /* 0x14 */
-} MPI2_RAID_ACTION_REQUEST, MPI2_POINTER PTR_MPI2_RAID_ACTION_REQUEST,
-  Mpi2RaidActionRequest_t, MPI2_POINTER pMpi2RaidActionRequest_t;
-
-/* RAID Action request Action values */
-
-#define MPI2_RAID_ACTION_INDICATOR_STRUCT           (0x01)
-#define MPI2_RAID_ACTION_CREATE_VOLUME              (0x02)
-#define MPI2_RAID_ACTION_DELETE_VOLUME              (0x03)
-#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES        (0x04)
-#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES         (0x05)
-#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE           (0x0A)
-#define MPI2_RAID_ACTION_PHYSDISK_ONLINE            (0x0B)
-#define MPI2_RAID_ACTION_FAIL_PHYSDISK              (0x0F)
-#define MPI2_RAID_ACTION_ACTIVATE_VOLUME            (0x11)
-#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE      (0x15)
-#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE     (0x17)
-#define MPI2_RAID_ACTION_SET_VOLUME_NAME            (0x18)
-#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE     (0x19)
-#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME       (0x1C)
-#define MPI2_RAID_ACTION_CREATE_HOT_SPARE           (0x1D)
-#define MPI2_RAID_ACTION_DELETE_HOT_SPARE           (0x1E)
-#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED  (0x20)
-#define MPI2_RAID_ACTION_START_RAID_FUNCTION        (0x21)
-#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION         (0x22)
-#define MPI2_RAID_ACTION_COMPATIBILITY_CHECK        (0x23)
-#define MPI2_RAID_ACTION_PHYSDISK_HIDDEN            (0x24)
-#define MPI2_RAID_ACTION_MIN_PRODUCT_SPECIFIC       (0x80)
-#define MPI2_RAID_ACTION_MAX_PRODUCT_SPECIFIC       (0xFF)
-
-/* RAID Volume Creation Structure */
-
-/*
- * The following define can be customized for the targeted product.
- */
-#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS
-#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS        (1)
-#endif
-
-typedef struct _MPI2_RAID_VOLUME_PHYSDISK
-{
-    U8                      RAIDSetNum;                     /* 0x00 */
-    U8                      PhysDiskMap;                    /* 0x01 */
-    U16                     PhysDiskDevHandle;              /* 0x02 */
-} MPI2_RAID_VOLUME_PHYSDISK, MPI2_POINTER PTR_MPI2_RAID_VOLUME_PHYSDISK,
-  Mpi2RaidVolumePhysDisk_t, MPI2_POINTER pMpi2RaidVolumePhysDisk_t;
-
-/* defines for the PhysDiskMap field */
-#define MPI2_RAIDACTION_PHYSDISK_PRIMARY            (0x01)
-#define MPI2_RAIDACTION_PHYSDISK_SECONDARY          (0x02)
-
-typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT
-{
-    U8                          NumPhysDisks;               /* 0x00 */
-    U8                          VolumeType;                 /* 0x01 */
-    U16                         Reserved1;                  /* 0x02 */
-    U32                         VolumeCreationFlags;        /* 0x04 */
-    U32                         VolumeSettings;             /* 0x08 */
-    U8                          Reserved2;                  /* 0x0C */
-    U8                          ResyncRate;                 /* 0x0D */
-    U16                         DataScrubDuration;          /* 0x0E */
-    U64                         VolumeMaxLBA;               /* 0x10 */
-    U32                         StripeSize;                 /* 0x18 */
-    U8                          Name[16];                   /* 0x1C */
-    MPI2_RAID_VOLUME_PHYSDISK   PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS];/* 0x2C */
-} MPI2_RAID_VOLUME_CREATION_STRUCT,
-  MPI2_POINTER PTR_MPI2_RAID_VOLUME_CREATION_STRUCT,
-  Mpi2RaidVolumeCreationStruct_t, MPI2_POINTER pMpi2RaidVolumeCreationStruct_t;
-
-/* use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */
-
-/* defines for the VolumeCreationFlags field */
-#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS     (0x80000000)
-#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT      (0x00000004)
-#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT       (0x00000002)
-#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA         (0x00000001)
-/* The following is an obsolete define.
- * It must be shifted left 24 bits in order to set the proper bit.
- */
-#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80)
-
-
-/* RAID Online Capacity Expansion Structure */
-
-typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION
-{
-    U32                     Flags;                          /* 0x00 */
-    U16                     DevHandle0;                     /* 0x04 */
-    U16                     Reserved1;                      /* 0x06 */
-    U16                     DevHandle1;                     /* 0x08 */
-    U16                     Reserved2;                      /* 0x0A */
-} MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
-  MPI2_POINTER PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
-  Mpi2RaidOnlineCapacityExpansion_t,
-  MPI2_POINTER pMpi2RaidOnlineCapacityExpansion_t;
-
-/* RAID Compatibility Input Structure */
-
-typedef struct _MPI2_RAID_COMPATIBILITY_INPUT_STRUCT {
-	U16                     SourceDevHandle;               /* 0x00 */
-	U16                     CandidateDevHandle;             /* 0x02 */
-	U32                     Flags;                          /* 0x04 */
-	U32                     Reserved1;                      /* 0x08 */
-	U32                     Reserved2;                      /* 0x0C */
-} MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
-MPI2_POINTER PTR_MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
-Mpi2RaidCompatibilityInputStruct_t,
-MPI2_POINTER pMpi2RaidCompatibilityInputStruct_t;
-
-/* defines for RAID Compatibility Structure Flags field */
-#define MPI2_RAID_COMPAT_SOURCE_IS_VOLUME_FLAG      (0x00000002)
-#define MPI2_RAID_COMPAT_REPORT_SOURCE_INFO_FLAG    (0x00000001)
-
-
-/* RAID Volume Indicator Structure */
-
-typedef struct _MPI2_RAID_VOL_INDICATOR
-{
-    U64                     TotalBlocks;                    /* 0x00 */
-    U64                     BlocksRemaining;                /* 0x08 */
-    U32                     Flags;                          /* 0x10 */
-	U32                     ElapsedSeconds;                 /* 0x14 */
-} MPI2_RAID_VOL_INDICATOR, MPI2_POINTER PTR_MPI2_RAID_VOL_INDICATOR,
-  Mpi2RaidVolIndicator_t, MPI2_POINTER pMpi2RaidVolIndicator_t;
-
-/* defines for RAID Volume Indicator Flags field */
-#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID   (0x80000000)
-
-#define MPI2_RAID_VOL_FLAGS_OP_MASK                 (0x0000000F)
-#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT      (0x00000000)
-#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
-#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK    (0x00000002)
-#define MPI2_RAID_VOL_FLAGS_OP_RESYNC               (0x00000003)
-#define MPI2_RAID_VOL_FLAGS_OP_MDC                  (0x00000004)
-
-/* RAID Compatibility Result Structure */
-
-typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT {
-	U8                      State;                          /* 0x00 */
-	U8                      Reserved1;                      /* 0x01 */
-	U16                     Reserved2;                      /* 0x02 */
-	U32                     GenericAttributes;              /* 0x04 */
-	U32                     OEMSpecificAttributes;          /* 0x08 */
-	U32                     Reserved3;                      /* 0x0C */
-	U32                     Reserved4;                      /* 0x10 */
-} MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
-MPI2_POINTER PTR_MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
-Mpi2RaidCompatibilityResultStruct_t,
-MPI2_POINTER pMpi2RaidCompatibilityResultStruct_t;
-
-/* defines for RAID Compatibility Result Structure State field */
-#define MPI2_RAID_COMPAT_STATE_COMPATIBLE           (0x00)
-#define MPI2_RAID_COMPAT_STATE_NOT_COMPATIBLE       (0x01)
-
-/* defines for RAID Compatibility Result Structure GenericAttributes field */
-#define MPI2_RAID_COMPAT_GENATTRIB_4K_SECTOR            (0x00000010)
-
-#define MPI2_RAID_COMPAT_GENATTRIB_MEDIA_MASK           (0x0000000C)
-#define MPI2_RAID_COMPAT_GENATTRIB_SOLID_STATE_DRIVE    (0x00000008)
-#define MPI2_RAID_COMPAT_GENATTRIB_HARD_DISK_DRIVE      (0x00000004)
-
-#define MPI2_RAID_COMPAT_GENATTRIB_PROTOCOL_MASK        (0x00000003)
-#define MPI2_RAID_COMPAT_GENATTRIB_SAS_PROTOCOL         (0x00000002)
-#define MPI2_RAID_COMPAT_GENATTRIB_SATA_PROTOCOL        (0x00000001)
-
-/* RAID Action Reply ActionData union */
-typedef union _MPI2_RAID_ACTION_REPLY_DATA
-{
-	U32                                     Word[6];
-	MPI2_RAID_VOL_INDICATOR                 RaidVolumeIndicator;
-	U16                                     VolDevHandle;
-	U8                                      VolumeState;
-	U8                                      PhysDiskNum;
-	MPI2_RAID_COMPATIBILITY_RESULT_STRUCT   RaidCompatibilityResult;
-} MPI2_RAID_ACTION_REPLY_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY_DATA,
-  Mpi2RaidActionReplyData_t, MPI2_POINTER pMpi2RaidActionReplyData_t;
-
-/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
-
-
-/* RAID Action Reply Message */
-typedef struct _MPI2_RAID_ACTION_REPLY
-{
-    U8                          Action;                     /* 0x00 */
-    U8                          Reserved1;                  /* 0x01 */
-    U8                          MsgLength;                  /* 0x02 */
-    U8                          Function;                   /* 0x03 */
-    U16                         VolDevHandle;               /* 0x04 */
-    U8                          PhysDiskNum;                /* 0x06 */
-    U8                          MsgFlags;                   /* 0x07 */
-    U8                          VP_ID;                      /* 0x08 */
-    U8                          VF_ID;                      /* 0x09 */
-    U16                         Reserved2;                  /* 0x0A */
-    U16                         Reserved3;                  /* 0x0C */
-    U16                         IOCStatus;                  /* 0x0E */
-    U32                         IOCLogInfo;                 /* 0x10 */
-    MPI2_RAID_ACTION_REPLY_DATA ActionData;                 /* 0x14 */
-} MPI2_RAID_ACTION_REPLY, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY,
-  Mpi2RaidActionReply_t, MPI2_POINTER pMpi2RaidActionReply_t;
-
-
-#endif
-
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h
deleted file mode 100644
index 45b6fa10b..000000000
--- a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- *  Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- *           Name:  mpi2_sas.h
- *          Title:  MPI Serial Attached SCSI structures and definitions
- *  Creation Date:  February 9, 2007
- *
- *  mpi2_sas.h Version:  02.00.05
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  06-26-07  02.00.01  Added Clear All Persistent Operation to SAS IO Unit
- *                      Control Request.
- *  10-02-08  02.00.02  Added Set IOC Parameter Operation to SAS IO Unit Control
- *                      Request.
- *  10-28-09  02.00.03  Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
- *                      to MPI2_SGE_IO_UNION since it supports chained SGLs.
- *  05-12-10  02.00.04  Modified some comments.
- *  08-11-10  02.00.05  Added NCQ operations to SAS IO Unit Control.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_SAS_H
-#define MPI2_SAS_H
-
-/*
- * Values for SASStatus.
- */
-#define MPI2_SASSTATUS_SUCCESS                          (0x00)
-#define MPI2_SASSTATUS_UNKNOWN_ERROR                    (0x01)
-#define MPI2_SASSTATUS_INVALID_FRAME                    (0x02)
-#define MPI2_SASSTATUS_UTC_BAD_DEST                     (0x03)
-#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED               (0x04)
-#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED   (0x05)
-#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST           (0x06)
-#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED       (0x07)
-#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY           (0x08)
-#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION            (0x09)
-#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT           (0x0A)
-#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT            (0x0B)
-#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA    (0x0C)
-#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR    (0x0D)
-#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED            (0x0E)
-#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH       (0x0F)
-#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA          (0x10)
-#define MPI2_SASSTATUS_DATA_OFFSET_ERROR                (0x11)
-#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED                (0x12)
-#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED           (0x13)
-#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT       (0x14)
-
-
-/*
- * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
- * data and SAS Configuration pages.
- */
-#define MPI2_SAS_DEVICE_INFO_SEP                (0x00004000)
-#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE       (0x00002000)
-#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE         (0x00001000)
-#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH      (0x00000800)
-#define MPI2_SAS_DEVICE_INFO_SSP_TARGET         (0x00000400)
-#define MPI2_SAS_DEVICE_INFO_STP_TARGET         (0x00000200)
-#define MPI2_SAS_DEVICE_INFO_SMP_TARGET         (0x00000100)
-#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE        (0x00000080)
-#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR      (0x00000040)
-#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR      (0x00000020)
-#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR      (0x00000010)
-#define MPI2_SAS_DEVICE_INFO_SATA_HOST          (0x00000008)
-
-#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE   (0x00000007)
-#define MPI2_SAS_DEVICE_INFO_NO_DEVICE          (0x00000000)
-#define MPI2_SAS_DEVICE_INFO_END_DEVICE         (0x00000001)
-#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER      (0x00000002)
-#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER    (0x00000003)
-
-
-/*****************************************************************************
-*
-*        SAS Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-*  SMP Passthrough messages
-****************************************************************************/
-
-/* SMP Passthrough Request Message */
-typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST
-{
-    U8                      PassthroughFlags;   /* 0x00 */
-    U8                      PhysicalPort;       /* 0x01 */
-    U8                      ChainOffset;        /* 0x02 */
-    U8                      Function;           /* 0x03 */
-    U16                     RequestDataLength;  /* 0x04 */
-    U8                      SGLFlags;           /* 0x06 */
-    U8                      MsgFlags;           /* 0x07 */
-    U8                      VP_ID;              /* 0x08 */
-    U8                      VF_ID;              /* 0x09 */
-    U16                     Reserved1;          /* 0x0A */
-    U32                     Reserved2;          /* 0x0C */
-    U64                     SASAddress;         /* 0x10 */
-    U32                     Reserved3;          /* 0x18 */
-    U32                     Reserved4;          /* 0x1C */
-    MPI2_SIMPLE_SGE_UNION   SGL;                /* 0x20 */
-} MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
-  Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t;
-
-/* values for PassthroughFlags field */
-#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE      (0x80)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* SMP Passthrough Reply Message */
-typedef struct _MPI2_SMP_PASSTHROUGH_REPLY
-{
-    U8                      PassthroughFlags;   /* 0x00 */
-    U8                      PhysicalPort;       /* 0x01 */
-    U8                      MsgLength;          /* 0x02 */
-    U8                      Function;           /* 0x03 */
-    U16                     ResponseDataLength; /* 0x04 */
-    U8                      SGLFlags;           /* 0x06 */
-    U8                      MsgFlags;           /* 0x07 */
-    U8                      VP_ID;              /* 0x08 */
-    U8                      VF_ID;              /* 0x09 */
-    U16                     Reserved1;          /* 0x0A */
-    U8                      Reserved2;          /* 0x0C */
-    U8                      SASStatus;          /* 0x0D */
-    U16                     IOCStatus;          /* 0x0E */
-    U32                     IOCLogInfo;         /* 0x10 */
-    U32                     Reserved3;          /* 0x14 */
-    U8                      ResponseData[4];    /* 0x18 */
-} MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY,
-  Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t;
-
-/* values for PassthroughFlags field */
-#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE    (0x80)
-
-/* values for SASStatus field are at the top of this file */
-
-
-/****************************************************************************
-*  SATA Passthrough messages
-****************************************************************************/
-
-/* SATA Passthrough Request Message */
-typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST
-{
-    U16                     DevHandle;          /* 0x00 */
-    U8                      ChainOffset;        /* 0x02 */
-    U8                      Function;           /* 0x03 */
-    U16                     PassthroughFlags;   /* 0x04 */
-    U8                      SGLFlags;           /* 0x06 */
-    U8                      MsgFlags;           /* 0x07 */
-    U8                      VP_ID;              /* 0x08 */
-    U8                      VF_ID;              /* 0x09 */
-    U16                     Reserved1;          /* 0x0A */
-    U32                     Reserved2;          /* 0x0C */
-    U32                     Reserved3;          /* 0x10 */
-    U32                     Reserved4;          /* 0x14 */
-    U32                     DataLength;         /* 0x18 */
-    U8                      CommandFIS[20];     /* 0x1C */
-    MPI2_SGE_IO_UNION       SGL;                /* 0x30 */
-} MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
-  Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t;
-
-/* values for PassthroughFlags field */
-#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG      (0x0100)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA               (0x0020)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO               (0x0010)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU    (0x0004)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE             (0x0002)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_READ              (0x0001)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* SATA Passthrough Reply Message */
-typedef struct _MPI2_SATA_PASSTHROUGH_REPLY
-{
-    U16                     DevHandle;          /* 0x00 */
-    U8                      MsgLength;          /* 0x02 */
-    U8                      Function;           /* 0x03 */
-    U16                     PassthroughFlags;   /* 0x04 */
-    U8                      SGLFlags;           /* 0x06 */
-    U8                      MsgFlags;           /* 0x07 */
-    U8                      VP_ID;              /* 0x08 */
-    U8                      VF_ID;              /* 0x09 */
-    U16                     Reserved1;          /* 0x0A */
-    U8                      Reserved2;          /* 0x0C */
-    U8                      SASStatus;          /* 0x0D */
-    U16                     IOCStatus;          /* 0x0E */
-    U32                     IOCLogInfo;         /* 0x10 */
-    U8                      StatusFIS[20];      /* 0x14 */
-    U32                     StatusControlRegisters; /* 0x28 */
-    U32                     TransferCount;      /* 0x2C */
-} MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY,
-  Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t;
-
-/* values for SASStatus field are at the top of this file */
-
-
-/****************************************************************************
-*  SAS IO Unit Control messages
-****************************************************************************/
-
-/* SAS IO Unit Control Request Message */
-typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST
-{
-    U8                      Operation;          /* 0x00 */
-    U8                      Reserved1;          /* 0x01 */
-    U8                      ChainOffset;        /* 0x02 */
-    U8                      Function;           /* 0x03 */
-    U16                     DevHandle;          /* 0x04 */
-    U8                      IOCParameter;       /* 0x06 */
-    U8                      MsgFlags;           /* 0x07 */
-    U8                      VP_ID;              /* 0x08 */
-    U8                      VF_ID;              /* 0x09 */
-    U16                     Reserved3;          /* 0x0A */
-    U16                     Reserved4;          /* 0x0C */
-    U8                      PhyNum;             /* 0x0E */
-    U8                      PrimFlags;          /* 0x0F */
-    U32                     Primitive;          /* 0x10 */
-    U8                      LookupMethod;       /* 0x14 */
-    U8                      Reserved5;          /* 0x15 */
-    U16                     SlotNumber;         /* 0x16 */
-    U64                     LookupAddress;      /* 0x18 */
-    U32                     IOCParameterValue;  /* 0x20 */
-    U32                     Reserved7;          /* 0x24 */
-    U32                     Reserved8;          /* 0x28 */
-} MPI2_SAS_IOUNIT_CONTROL_REQUEST,
-  MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
-  Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t;
-
-/* values for the Operation field */
-#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT        (0x02)
-#define MPI2_SAS_OP_PHY_LINK_RESET              (0x06)
-#define MPI2_SAS_OP_PHY_HARD_RESET              (0x07)
-#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG         (0x08)
-#define MPI2_SAS_OP_SEND_PRIMITIVE              (0x0A)
-#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY        (0x0B)
-#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
-#define MPI2_SAS_OP_REMOVE_DEVICE               (0x0D)
-#define MPI2_SAS_OP_LOOKUP_MAPPING              (0x0E)
-#define MPI2_SAS_OP_SET_IOC_PARAMETER           (0x0F)
-#define MPI2_SAS_OP_DEV_ENABLE_NCQ              (0x14)
-#define MPI2_SAS_OP_DEV_DISABLE_NCQ             (0x15)
-#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN        (0x80)
-
-/* values for the PrimFlags field */
-#define MPI2_SAS_PRIMFLAGS_SINGLE               (0x08)
-#define MPI2_SAS_PRIMFLAGS_TRIPLE               (0x02)
-#define MPI2_SAS_PRIMFLAGS_REDUNDANT            (0x01)
-
-/* values for the LookupMethod field */
-#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS          (0x01)
-#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT   (0x02)
-#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME      (0x03)
-
-
-/* SAS IO Unit Control Reply Message */
-typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY
-{
-    U8                      Operation;          /* 0x00 */
-    U8                      Reserved1;          /* 0x01 */
-    U8                      MsgLength;          /* 0x02 */
-    U8                      Function;           /* 0x03 */
-    U16                     DevHandle;          /* 0x04 */
-    U8                      IOCParameter;       /* 0x06 */
-    U8                      MsgFlags;           /* 0x07 */
-    U8                      VP_ID;              /* 0x08 */
-    U8                      VF_ID;              /* 0x09 */
-    U16                     Reserved3;          /* 0x0A */
-    U16                     Reserved4;          /* 0x0C */
-    U16                     IOCStatus;          /* 0x0E */
-    U32                     IOCLogInfo;         /* 0x10 */
-} MPI2_SAS_IOUNIT_CONTROL_REPLY,
-  MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
-  Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t;
-
-
-#endif
-
-
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
deleted file mode 100644
index 659b8ac83..000000000
--- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
+++ /dev/null
@@ -1,481 +0,0 @@
-/*
- *  Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- *           Name:  mpi2_tool.h
- *          Title:  MPI diagnostic tool structures and definitions
- *  Creation Date:  March 26, 2007
- *
- *    mpi2_tool.h Version:  02.00.12
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  12-18-07  02.00.01  Added Diagnostic Buffer Post and Diagnostic Release
- *                      structures and defines.
- *  02-29-08  02.00.02  Modified various names to make them 32-character unique.
- *  05-06-09  02.00.03  Added ISTWI Read Write Tool and Diagnostic CLI Tool.
- *  07-30-09  02.00.04  Added ExtendedType field to DiagnosticBufferPost request
- *                      and reply messages.
- *                      Added MPI2_DIAG_BUF_TYPE_EXTENDED.
- *                      Incremented MPI2_DIAG_BUF_TYPE_COUNT.
- *  05-12-10  02.00.05  Added Diagnostic Data Upload tool.
- *  08-11-10  02.00.06  Added defines that were missing for Diagnostic Buffer
- *                      Post Request.
- *  05-25-11  02.00.07  Added Flags field and related defines to
- *                      MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST.
- *  07-26-12  02.00.10  Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
- *			it uses MPI Chain SGE as well as MPI Simple SGE.
- *  08-19-13  02.00.11  Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
- *  01-08-14  02.00.12  Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_TOOL_H
-#define MPI2_TOOL_H
-
-/*****************************************************************************
-*
-*               Toolbox Messages
-*
-*****************************************************************************/
-
-/* defines for the Tools */
-#define MPI2_TOOLBOX_CLEAN_TOOL                     (0x00)
-#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL               (0x01)
-#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL          (0x02)
-#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL          (0x03)
-#define MPI2_TOOLBOX_BEACON_TOOL                    (0x05)
-#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL            (0x06)
-#define MPI2_TOOLBOX_TEXT_DISPLAY_TOOL              (0x07)
-
-
-/****************************************************************************
-*  Toolbox reply
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_REPLY
-{
-    U8                      Tool;                       /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      MsgLength;                  /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U16                     Reserved5;                  /* 0x0C */
-    U16                     IOCStatus;                  /* 0x0E */
-    U32                     IOCLogInfo;                 /* 0x10 */
-} MPI2_TOOLBOX_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_REPLY,
-  Mpi2ToolboxReply_t, MPI2_POINTER pMpi2ToolboxReply_t;
-
-
-/****************************************************************************
-*  Toolbox Clean Tool request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST
-{
-    U8                      Tool;                       /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      ChainOffset;                /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U32                     Flags;                      /* 0x0C */
-   } MPI2_TOOLBOX_CLEAN_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_CLEAN_REQUEST,
-  Mpi2ToolboxCleanRequest_t, MPI2_POINTER pMpi2ToolboxCleanRequest_t;
-
-/* values for the Flags field */
-#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES            (0x80000000)
-#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES   (0x40000000)
-#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES      (0x20000000)
-#define MPI2_TOOLBOX_CLEAN_FW_CURRENT               (0x10000000)
-#define MPI2_TOOLBOX_CLEAN_FW_BACKUP                (0x08000000)
-#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC   (0x04000000)
-#define MPI2_TOOLBOX_CLEAN_MEGARAID                 (0x02000000)
-#define MPI2_TOOLBOX_CLEAN_INITIALIZATION           (0x01000000)
-#define MPI2_TOOLBOX_CLEAN_FLASH                    (0x00000004)
-#define MPI2_TOOLBOX_CLEAN_SEEPROM                  (0x00000002)
-#define MPI2_TOOLBOX_CLEAN_NVSRAM                   (0x00000001)
-
-
-/****************************************************************************
-*  Toolbox Memory Move request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST {
-    U8                      Tool;                       /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      ChainOffset;                /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    MPI2_SGE_SIMPLE_UNION   SGL;                        /* 0x0C */
-} MPI2_TOOLBOX_MEM_MOVE_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST,
-  Mpi2ToolboxMemMoveRequest_t, MPI2_POINTER pMpi2ToolboxMemMoveRequest_t;
-
-
-/****************************************************************************
-*  Toolbox Diagnostic Data Upload request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST {
-	U8                      Tool;                       /* 0x00 */
-	U8                      Reserved1;                  /* 0x01 */
-	U8                      ChainOffset;                /* 0x02 */
-	U8                      Function;                   /* 0x03 */
-	U16                     Reserved2;                  /* 0x04 */
-	U8                      Reserved3;                  /* 0x06 */
-	U8                      MsgFlags;                   /* 0x07 */
-	U8                      VP_ID;                      /* 0x08 */
-	U8                      VF_ID;                      /* 0x09 */
-	U16                     Reserved4;                  /* 0x0A */
-	U8                      SGLFlags;                   /* 0x0C */
-	U8                      Reserved5;                  /* 0x0D */
-	U16                     Reserved6;                  /* 0x0E */
-	U32                     Flags;                      /* 0x10 */
-	U32                     DataLength;                 /* 0x14 */
-	MPI2_SGE_SIMPLE_UNION   SGL;                        /* 0x18 */
-} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
-MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
-Mpi2ToolboxDiagDataUploadRequest_t,
-MPI2_POINTER pMpi2ToolboxDiagDataUploadRequest_t;
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER {
-	U32                     DiagDataLength;             /* 00h */
-	U8                      FormatCode;                 /* 04h */
-	U8                      Reserved1;                  /* 05h */
-	U16                     Reserved2;                  /* 06h */
-} MPI2_DIAG_DATA_UPLOAD_HEADER, MPI2_POINTER PTR_MPI2_DIAG_DATA_UPLOAD_HEADER,
-Mpi2DiagDataUploadHeader_t, MPI2_POINTER pMpi2DiagDataUploadHeader_t;
-
-
-/****************************************************************************
-*  Toolbox ISTWI Read Write Tool
-****************************************************************************/
-
-/* Toolbox ISTWI Read Write Tool request message */
-typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
-    U8                      Tool;                       /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      ChainOffset;                /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U32                     Reserved5;                  /* 0x0C */
-    U32                     Reserved6;                  /* 0x10 */
-    U8                      DevIndex;                   /* 0x14 */
-    U8                      Action;                     /* 0x15 */
-    U8                      SGLFlags;                   /* 0x16 */
-	 U8                      Flags;                      /* 0x17 */
-    U16                     TxDataLength;               /* 0x18 */
-    U16                     RxDataLength;               /* 0x1A */
-    U32                     Reserved8;                  /* 0x1C */
-    U32                     Reserved9;                  /* 0x20 */
-    U32                     Reserved10;                 /* 0x24 */
-    U32                     Reserved11;                 /* 0x28 */
-    U32                     Reserved12;                 /* 0x2C */
-    MPI2_SGE_SIMPLE_UNION   SGL;                        /* 0x30 */
-} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
-  MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
-  Mpi2ToolboxIstwiReadWriteRequest_t,
-  MPI2_POINTER pMpi2ToolboxIstwiReadWriteRequest_t;
-
-/* values for the Action field */
-#define MPI2_TOOL_ISTWI_ACTION_READ_DATA            (0x01)
-#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA           (0x02)
-#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE             (0x03)
-#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS          (0x10)
-#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS          (0x11)
-#define MPI2_TOOL_ISTWI_ACTION_RESET                (0x12)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-/* values for the Flags field */
-#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE   (0x80)
-#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK         (0x07)
-
-/* Toolbox ISTWI Read Write Tool reply message */
-typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
-    U8                      Tool;                       /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      MsgLength;                  /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U16                     Reserved5;                  /* 0x0C */
-    U16                     IOCStatus;                  /* 0x0E */
-    U32                     IOCLogInfo;                 /* 0x10 */
-    U8                      DevIndex;                   /* 0x14 */
-    U8                      Action;                     /* 0x15 */
-    U8                      IstwiStatus;                /* 0x16 */
-    U8                      Reserved6;                  /* 0x17 */
-    U16                     TxDataCount;                /* 0x18 */
-    U16                     RxDataCount;                /* 0x1A */
-} MPI2_TOOLBOX_ISTWI_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_REPLY,
-  Mpi2ToolboxIstwiReply_t, MPI2_POINTER pMpi2ToolboxIstwiReply_t;
-
-
-/****************************************************************************
-*  Toolbox Beacon Tool request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_BEACON_REQUEST
-{
-    U8                      Tool;                       /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      ChainOffset;                /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U8                      Reserved5;                  /* 0x0C */
-    U8                      PhysicalPort;               /* 0x0D */
-    U8                      Reserved6;                  /* 0x0E */
-    U8                      Flags;                      /* 0x0F */
-} MPI2_TOOLBOX_BEACON_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_BEACON_REQUEST,
-  Mpi2ToolboxBeaconRequest_t, MPI2_POINTER pMpi2ToolboxBeaconRequest_t;
-
-/* values for the Flags field */
-#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF       (0x00)
-#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON        (0x01)
-
-
-/****************************************************************************
-*  Toolbox Diagnostic CLI Tool
-****************************************************************************/
-
-#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH    (0x5C)
-
-/* MPI v2.0 Toolbox Diagnostic CLI Tool request message */
-typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
-    U8                      Tool;                       /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      ChainOffset;                /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U8                      SGLFlags;                   /* 0x0C */
-    U8                      Reserved5;                  /* 0x0D */
-    U16                     Reserved6;                  /* 0x0E */
-    U32                     DataLength;                 /* 0x10 */
-    U8                      DiagnosticCliCommand
-		[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];     /* 0x14 */
-	MPI2_MPI_SGE_IO_UNION   SGL;                        /* 0x70 */
-} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
-  MPI2_POINTER PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
-  Mpi2ToolboxDiagnosticCliRequest_t,
-  MPI2_POINTER pMpi2ToolboxDiagnosticCliRequest_t;
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* Toolbox Diagnostic CLI Tool reply message */
-typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY {
-    U8                      Tool;                       /* 0x00 */
-    U8                      Reserved1;                  /* 0x01 */
-    U8                      MsgLength;                  /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U16                     Reserved5;                  /* 0x0C */
-    U16                     IOCStatus;                  /* 0x0E */
-    U32                     IOCLogInfo;                 /* 0x10 */
-    U32                     ReturnedDataLength;         /* 0x14 */
-} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY,
-  MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY,
-  Mpi2ToolboxDiagnosticCliReply_t,
-  MPI2_POINTER pMpi2ToolboxDiagnosticCliReply_t;
-
-
-/****************************************************************************
-*  Toolbox Console Text Display Tool
-****************************************************************************/
-
-/* Toolbox Console Text Display Tool request message */
-typedef struct _MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST {
-	U8                      Tool;               /* 0x00 */
-	U8                      Reserved1;          /* 0x01 */
-	U8                      ChainOffset;        /* 0x02 */
-	U8                      Function;           /* 0x03 */
-	U16                     Reserved2;          /* 0x04 */
-	U8                      Reserved3;          /* 0x06 */
-	U8                      MsgFlags;           /* 0x07 */
-	U8                      VP_ID;              /* 0x08 */
-	U8                      VF_ID;              /* 0x09 */
-	U16                     Reserved4;          /* 0x0A */
-	U8                      Console;            /* 0x0C */
-	U8                      Flags;              /* 0x0D */
-	U16                     Reserved6;          /* 0x0E */
-	U8                      TextToDisplay[4];   /* 0x10 */
-} MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
-MPI2_POINTER PTR_MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
-Mpi2ToolboxTextDisplayRequest_t,
-MPI2_POINTER pMpi2ToolboxTextDisplayRequest_t;
-
-/* defines for the Console field */
-#define MPI2_TOOLBOX_CONSOLE_TYPE_MASK          (0xF0)
-#define MPI2_TOOLBOX_CONSOLE_TYPE_DEFAULT       (0x00)
-#define MPI2_TOOLBOX_CONSOLE_TYPE_UART          (0x10)
-#define MPI2_TOOLBOX_CONSOLE_TYPE_ETHERNET      (0x20)
-
-#define MPI2_TOOLBOX_CONSOLE_NUMBER_MASK        (0x0F)
-
-/* defines for the Flags field */
-#define MPI2_TOOLBOX_CONSOLE_FLAG_TIMESTAMP     (0x01)
-
-
-
-/*****************************************************************************
-*
-*       Diagnostic Buffer Messages
-*
-*****************************************************************************/
-
-
-/****************************************************************************
-*  Diagnostic Buffer Post request
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST
-{
-    U8                      ExtendedType;               /* 0x00 */
-    U8                      BufferType;                 /* 0x01 */
-    U8                      ChainOffset;                /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U64                     BufferAddress;              /* 0x0C */
-    U32                     BufferLength;               /* 0x14 */
-    U32                     Reserved5;                  /* 0x18 */
-    U32                     Reserved6;                  /* 0x1C */
-    U32                     Flags;                      /* 0x20 */
-    U32                     ProductSpecific[23];        /* 0x24 */
-} MPI2_DIAG_BUFFER_POST_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REQUEST,
-  Mpi2DiagBufferPostRequest_t, MPI2_POINTER pMpi2DiagBufferPostRequest_t;
-
-/* values for the ExtendedType field */
-#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION         (0x02)
-
-/* values for the BufferType field */
-#define MPI2_DIAG_BUF_TYPE_TRACE                    (0x00)
-#define MPI2_DIAG_BUF_TYPE_SNAPSHOT                 (0x01)
-#define MPI2_DIAG_BUF_TYPE_EXTENDED                 (0x02)
-/* count of the number of buffer types */
-#define MPI2_DIAG_BUF_TYPE_COUNT                    (0x03)
-
-/* values for the Flags field */
-#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL          (0x00000002)
-#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE        (0x00000001)
-
-
-/****************************************************************************
-*  Diagnostic Buffer Post reply
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_BUFFER_POST_REPLY
-{
-    U8                      ExtendedType;               /* 0x00 */
-    U8                      BufferType;                 /* 0x01 */
-    U8                      MsgLength;                  /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U16                     Reserved5;                  /* 0x0C */
-    U16                     IOCStatus;                  /* 0x0E */
-    U32                     IOCLogInfo;                 /* 0x10 */
-    U32                     TransferLength;             /* 0x14 */
-} MPI2_DIAG_BUFFER_POST_REPLY, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REPLY,
-  Mpi2DiagBufferPostReply_t, MPI2_POINTER pMpi2DiagBufferPostReply_t;
-
-
-/****************************************************************************
-*  Diagnostic Release request
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_RELEASE_REQUEST
-{
-    U8                      Reserved1;                  /* 0x00 */
-    U8                      BufferType;                 /* 0x01 */
-    U8                      ChainOffset;                /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-} MPI2_DIAG_RELEASE_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REQUEST,
-  Mpi2DiagReleaseRequest_t, MPI2_POINTER pMpi2DiagReleaseRequest_t;
-
-
-/****************************************************************************
-*  Diagnostic Buffer Post reply
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_RELEASE_REPLY
-{
-    U8                      Reserved1;                  /* 0x00 */
-    U8                      BufferType;                 /* 0x01 */
-    U8                      MsgLength;                  /* 0x02 */
-    U8                      Function;                   /* 0x03 */
-    U16                     Reserved2;                  /* 0x04 */
-    U8                      Reserved3;                  /* 0x06 */
-    U8                      MsgFlags;                   /* 0x07 */
-    U8                      VP_ID;                      /* 0x08 */
-    U8                      VF_ID;                      /* 0x09 */
-    U16                     Reserved4;                  /* 0x0A */
-    U16                     Reserved5;                  /* 0x0C */
-    U16                     IOCStatus;                  /* 0x0E */
-    U32                     IOCLogInfo;                 /* 0x10 */
-} MPI2_DIAG_RELEASE_REPLY, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REPLY,
-  Mpi2DiagReleaseReply_t, MPI2_POINTER pMpi2DiagReleaseReply_t;
-
-
-#endif
-
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_type.h b/drivers/scsi/mpt2sas/mpi/mpi2_type.h
deleted file mode 100644
index 6b0dcdd02..000000000
--- a/drivers/scsi/mpt2sas/mpi/mpi2_type.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- *  Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- *           Name:  mpi2_type.h
- *          Title:  MPI basic type definitions
- *  Creation Date:  August 16, 2006
- *
- *    mpi2_type.h Version:  02.00.00
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_TYPE_H
-#define MPI2_TYPE_H
-
-
-/*******************************************************************************
- * Define MPI2_POINTER if it hasn't already been defined. By default
- * MPI2_POINTER is defined to be a near pointer. MPI2_POINTER can be defined as
- * a far pointer by defining MPI2_POINTER as "far *" before this header file is
- * included.
- */
-#ifndef MPI2_POINTER
-#define MPI2_POINTER     *
-#endif
-
-/* the basic types may have already been included by mpi_type.h */
-#ifndef MPI_TYPE_H
-/*****************************************************************************
-*
-*               Basic Types
-*
-*****************************************************************************/
-
-typedef u8 U8;
-typedef __le16 U16;
-typedef __le32 U32;
-typedef __le64 U64 __attribute__((aligned(4)));
-
-/*****************************************************************************
-*
-*               Pointer Types
-*
-*****************************************************************************/
-
-typedef U8      *PU8;
-typedef U16     *PU16;
-typedef U32     *PU32;
-typedef U64     *PU64;
-
-#endif
-
-#endif
-
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
deleted file mode 100644
index c16791122..000000000
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ /dev/null
@@ -1,4899 +0,0 @@
-/*
- * This is the Fusion MPT base driver providing common API layer interface
- * for access to MPT (Message Passing Technology) firmware.
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
- * Copyright (C) 2007-2014  LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
- * USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/sort.h>
-#include <linux/io.h>
-#include <linux/time.h>
-#include <linux/kthread.h>
-#include <linux/aer.h>
-
-#include "mpt2sas_base.h"
-
-static MPT_CALLBACK	mpt_callbacks[MPT_MAX_CALLBACKS];
-
-#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
-
-#define MAX_HBA_QUEUE_DEPTH	30000
-#define MAX_CHAIN_DEPTH		100000
-static int max_queue_depth = -1;
-module_param(max_queue_depth, int, 0);
-MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");
-
-static int max_sgl_entries = -1;
-module_param(max_sgl_entries, int, 0);
-MODULE_PARM_DESC(max_sgl_entries, " max sg entries ");
-
-static int msix_disable = -1;
-module_param(msix_disable, int, 0);
-MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
-
-static int max_msix_vectors = -1;
-module_param(max_msix_vectors, int, 0);
-MODULE_PARM_DESC(max_msix_vectors, " max msix vectors ");
-
-static int mpt2sas_fwfault_debug;
-MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
-	"and halt firmware - (default=0)");
-
-static int disable_discovery = -1;
-module_param(disable_discovery, int, 0);
-MODULE_PARM_DESC(disable_discovery, " disable discovery ");
-
-static int
-_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag);
-
-static int
-_base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag);
-
-/**
- * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
- *
- */
-static int
-_scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
-{
-	int ret = param_set_int(val, kp);
-	struct MPT2SAS_ADAPTER *ioc;
-
-	if (ret)
-		return ret;
-
-	/* global ioc spinlock to protect controller list on list operations */
-	printk(KERN_INFO "setting fwfault_debug(%d)\n", mpt2sas_fwfault_debug);
-	spin_lock(&gioc_lock);
-	list_for_each_entry(ioc, &mpt2sas_ioc_list, list)
-		ioc->fwfault_debug = mpt2sas_fwfault_debug;
-	spin_unlock(&gioc_lock);
-	return 0;
-}
-
-module_param_call(mpt2sas_fwfault_debug, _scsih_set_fwfault_debug,
-    param_get_int, &mpt2sas_fwfault_debug, 0644);
-
-/**
- *  mpt2sas_remove_dead_ioc_func - kthread context to remove dead ioc
- * @arg: input argument, used to derive ioc
- *
- * Return 0 if controller is removed from pci subsystem.
- * Return -1 for other case.
- */
-static int mpt2sas_remove_dead_ioc_func(void *arg)
-{
-		struct MPT2SAS_ADAPTER *ioc = (struct MPT2SAS_ADAPTER *)arg;
-		struct pci_dev *pdev;
-
-		if ((ioc == NULL))
-			return -1;
-
-		pdev = ioc->pdev;
-		if ((pdev == NULL))
-			return -1;
-		pci_stop_and_remove_bus_device_locked(pdev);
-		return 0;
-}
-
-
-/**
- * _base_fault_reset_work - workq handling ioc fault conditions
- * @work: input argument, used to derive ioc
- * Context: sleep.
- *
- * Return nothing.
- */
-static void
-_base_fault_reset_work(struct work_struct *work)
-{
-	struct MPT2SAS_ADAPTER *ioc =
-	    container_of(work, struct MPT2SAS_ADAPTER, fault_reset_work.work);
-	unsigned long	 flags;
-	u32 doorbell;
-	int rc;
-	struct task_struct *p;
-
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	if (ioc->shost_recovery || ioc->pci_error_recovery)
-		goto rearm_timer;
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-
-	doorbell = mpt2sas_base_get_iocstate(ioc, 0);
-	if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) {
-		printk(MPT2SAS_INFO_FMT "%s : SAS host is non-operational !!!!\n",
-			ioc->name, __func__);
-
-		/* It may be possible that EEH recovery can resolve some of
-		 * pci bus failure issues rather removing the dead ioc function
-		 * by considering controller is in a non-operational state. So
-		 * here priority is given to the EEH recovery. If it doesn't
-		 * not resolve this issue, mpt2sas driver will consider this
-		 * controller to non-operational state and remove the dead ioc
-		 * function.
-		 */
-		if (ioc->non_operational_loop++ < 5) {
-			spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock,
-							 flags);
-			goto rearm_timer;
-		}
-
-		/*
-		 * Call _scsih_flush_pending_cmds callback so that we flush all
-		 * pending commands back to OS. This call is required to aovid
-		 * deadlock at block layer. Dead IOC will fail to do diag reset,
-		 * and this call is safe since dead ioc will never return any
-		 * command back from HW.
-		 */
-		ioc->schedule_dead_ioc_flush_running_cmds(ioc);
-		/*
-		 * Set remove_host flag early since kernel thread will
-		 * take some time to execute.
-		 */
-		ioc->remove_host = 1;
-		/*Remove the Dead Host */
-		p = kthread_run(mpt2sas_remove_dead_ioc_func, ioc,
-		    "mpt2sas_dead_ioc_%d", ioc->id);
-		if (IS_ERR(p)) {
-			printk(MPT2SAS_ERR_FMT
-			"%s: Running mpt2sas_dead_ioc thread failed !!!!\n",
-			ioc->name, __func__);
-		} else {
-		    printk(MPT2SAS_ERR_FMT
-			"%s: Running mpt2sas_dead_ioc thread success !!!!\n",
-			ioc->name, __func__);
-		}
-
-		return; /* don't rearm timer */
-	}
-
-	ioc->non_operational_loop = 0;
-
-	if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
-		rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-		printk(MPT2SAS_WARN_FMT "%s: hard reset: %s\n", ioc->name,
-		    __func__, (rc == 0) ? "success" : "failed");
-		doorbell = mpt2sas_base_get_iocstate(ioc, 0);
-		if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
-			mpt2sas_base_fault_info(ioc, doorbell &
-			    MPI2_DOORBELL_DATA_MASK);
-	}
-
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- rearm_timer:
-	if (ioc->fault_reset_work_q)
-		queue_delayed_work(ioc->fault_reset_work_q,
-		    &ioc->fault_reset_work,
-		    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-}
-
-/**
- * mpt2sas_base_start_watchdog - start the fault_reset_work_q
- * @ioc: per adapter object
- * Context: sleep.
- *
- * Return nothing.
- */
-void
-mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc)
-{
-	unsigned long	 flags;
-
-	if (ioc->fault_reset_work_q)
-		return;
-
-	/* initialize fault polling */
-	INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
-	snprintf(ioc->fault_reset_work_q_name,
-	    sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
-	ioc->fault_reset_work_q =
-		create_singlethread_workqueue(ioc->fault_reset_work_q_name);
-	if (!ioc->fault_reset_work_q) {
-		printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
-		    ioc->name, __func__, __LINE__);
-			return;
-	}
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	if (ioc->fault_reset_work_q)
-		queue_delayed_work(ioc->fault_reset_work_q,
-		    &ioc->fault_reset_work,
-		    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-}
-
-/**
- * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
- * @ioc: per adapter object
- * Context: sleep.
- *
- * Return nothing.
- */
-void
-mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc)
-{
-	unsigned long	 flags;
-	struct workqueue_struct *wq;
-
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	wq = ioc->fault_reset_work_q;
-	ioc->fault_reset_work_q = NULL;
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-	if (wq) {
-		if (!cancel_delayed_work_sync(&ioc->fault_reset_work))
-			flush_workqueue(wq);
-		destroy_workqueue(wq);
-	}
-}
-
-/**
- * mpt2sas_base_fault_info - verbose translation of firmware FAULT code
- * @ioc: per adapter object
- * @fault_code: fault code
- *
- * Return nothing.
- */
-void
-mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code)
-{
-	printk(MPT2SAS_ERR_FMT "fault_state(0x%04x)!\n",
-	    ioc->name, fault_code);
-}
-
-/**
- * mpt2sas_halt_firmware - halt's mpt controller firmware
- * @ioc: per adapter object
- *
- * For debugging timeout related issues.  Writing 0xCOFFEE00
- * to the doorbell register will halt controller firmware. With
- * the purpose to stop both driver and firmware, the enduser can
- * obtain a ring buffer from controller UART.
- */
-void
-mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc)
-{
-	u32 doorbell;
-
-	if (!ioc->fwfault_debug)
-		return;
-
-	dump_stack();
-
-	doorbell = readl(&ioc->chip->Doorbell);
-	if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
-		mpt2sas_base_fault_info(ioc , doorbell);
-	else {
-		writel(0xC0FFEE00, &ioc->chip->Doorbell);
-		printk(MPT2SAS_ERR_FMT "Firmware is halted due to command "
-		    "timeout\n", ioc->name);
-	}
-
-	panic("panic in %s\n", __func__);
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _base_sas_ioc_info - verbose translation of the ioc status
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @request_hdr: request mf
- *
- * Return nothing.
- */
-static void
-_base_sas_ioc_info(struct MPT2SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
-     MPI2RequestHeader_t *request_hdr)
-{
-	u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	char *desc = NULL;
-	u16 frame_sz;
-	char *func_str = NULL;
-
-	/* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
-	if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
-	    request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
-	    request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION)
-		return;
-
-	if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-		return;
-
-	switch (ioc_status) {
-
-/****************************************************************************
-*  Common IOCStatus values for all replies
-****************************************************************************/
-
-	case MPI2_IOCSTATUS_INVALID_FUNCTION:
-		desc = "invalid function";
-		break;
-	case MPI2_IOCSTATUS_BUSY:
-		desc = "busy";
-		break;
-	case MPI2_IOCSTATUS_INVALID_SGL:
-		desc = "invalid sgl";
-		break;
-	case MPI2_IOCSTATUS_INTERNAL_ERROR:
-		desc = "internal error";
-		break;
-	case MPI2_IOCSTATUS_INVALID_VPID:
-		desc = "invalid vpid";
-		break;
-	case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
-		desc = "insufficient resources";
-		break;
-	case MPI2_IOCSTATUS_INVALID_FIELD:
-		desc = "invalid field";
-		break;
-	case MPI2_IOCSTATUS_INVALID_STATE:
-		desc = "invalid state";
-		break;
-	case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
-		desc = "op state not supported";
-		break;
-
-/****************************************************************************
-*  Config IOCStatus values
-****************************************************************************/
-
-	case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION:
-		desc = "config invalid action";
-		break;
-	case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE:
-		desc = "config invalid type";
-		break;
-	case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE:
-		desc = "config invalid page";
-		break;
-	case MPI2_IOCSTATUS_CONFIG_INVALID_DATA:
-		desc = "config invalid data";
-		break;
-	case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS:
-		desc = "config no defaults";
-		break;
-	case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT:
-		desc = "config cant commit";
-		break;
-
-/****************************************************************************
-*  SCSI IO Reply
-****************************************************************************/
-
-	case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
-	case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
-	case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
-	case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
-	case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
-	case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
-	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
-	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
-	case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
-	case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
-	case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
-	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
-		break;
-
-/****************************************************************************
-*  For use by SCSI Initiator and SCSI Target end-to-end data protection
-****************************************************************************/
-
-	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
-		desc = "eedp guard error";
-		break;
-	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
-		desc = "eedp ref tag error";
-		break;
-	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
-		desc = "eedp app tag error";
-		break;
-
-/****************************************************************************
-*  SCSI Target values
-****************************************************************************/
-
-	case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX:
-		desc = "target invalid io index";
-		break;
-	case MPI2_IOCSTATUS_TARGET_ABORTED:
-		desc = "target aborted";
-		break;
-	case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE:
-		desc = "target no conn retryable";
-		break;
-	case MPI2_IOCSTATUS_TARGET_NO_CONNECTION:
-		desc = "target no connection";
-		break;
-	case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH:
-		desc = "target xfer count mismatch";
-		break;
-	case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR:
-		desc = "target data offset error";
-		break;
-	case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA:
-		desc = "target too much write data";
-		break;
-	case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT:
-		desc = "target iu too short";
-		break;
-	case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT:
-		desc = "target ack nak timeout";
-		break;
-	case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED:
-		desc = "target nak received";
-		break;
-
-/****************************************************************************
-*  Serial Attached SCSI values
-****************************************************************************/
-
-	case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED:
-		desc = "smp request failed";
-		break;
-	case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN:
-		desc = "smp data overrun";
-		break;
-
-/****************************************************************************
-*  Diagnostic Buffer Post / Diagnostic Release values
-****************************************************************************/
-
-	case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED:
-		desc = "diagnostic released";
-		break;
-	default:
-		break;
-	}
-
-	if (!desc)
-		return;
-
-	switch (request_hdr->Function) {
-	case MPI2_FUNCTION_CONFIG:
-		frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size;
-		func_str = "config_page";
-		break;
-	case MPI2_FUNCTION_SCSI_TASK_MGMT:
-		frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t);
-		func_str = "task_mgmt";
-		break;
-	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
-		frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t);
-		func_str = "sas_iounit_ctl";
-		break;
-	case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
-		frame_sz = sizeof(Mpi2SepRequest_t);
-		func_str = "enclosure";
-		break;
-	case MPI2_FUNCTION_IOC_INIT:
-		frame_sz = sizeof(Mpi2IOCInitRequest_t);
-		func_str = "ioc_init";
-		break;
-	case MPI2_FUNCTION_PORT_ENABLE:
-		frame_sz = sizeof(Mpi2PortEnableRequest_t);
-		func_str = "port_enable";
-		break;
-	case MPI2_FUNCTION_SMP_PASSTHROUGH:
-		frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
-		func_str = "smp_passthru";
-		break;
-	default:
-		frame_sz = 32;
-		func_str = "unknown";
-		break;
-	}
-
-	printk(MPT2SAS_WARN_FMT "ioc_status: %s(0x%04x), request(0x%p),"
-	    " (%s)\n", ioc->name, desc, ioc_status, request_hdr, func_str);
-
-	_debug_dump_mf(request_hdr, frame_sz/4);
-}
-
-/**
- * _base_display_event_data - verbose translation of firmware asyn events
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- *
- * Return nothing.
- */
-static void
-_base_display_event_data(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventNotificationReply_t *mpi_reply)
-{
-	char *desc = NULL;
-	u16 event;
-
-	if (!(ioc->logging_level & MPT_DEBUG_EVENTS))
-		return;
-
-	event = le16_to_cpu(mpi_reply->Event);
-
-	switch (event) {
-	case MPI2_EVENT_LOG_DATA:
-		desc = "Log Data";
-		break;
-	case MPI2_EVENT_STATE_CHANGE:
-		desc = "Status Change";
-		break;
-	case MPI2_EVENT_HARD_RESET_RECEIVED:
-		desc = "Hard Reset Received";
-		break;
-	case MPI2_EVENT_EVENT_CHANGE:
-		desc = "Event Change";
-		break;
-	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
-		desc = "Device Status Change";
-		break;
-	case MPI2_EVENT_IR_OPERATION_STATUS:
-		if (!ioc->hide_ir_msg)
-			desc = "IR Operation Status";
-		break;
-	case MPI2_EVENT_SAS_DISCOVERY:
-	{
-		Mpi2EventDataSasDiscovery_t *event_data =
-		    (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData;
-		printk(MPT2SAS_INFO_FMT "Discovery: (%s)", ioc->name,
-		    (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
-		    "start" : "stop");
-		if (event_data->DiscoveryStatus)
-			printk("discovery_status(0x%08x)",
-			    le32_to_cpu(event_data->DiscoveryStatus));
-		printk("\n");
-		return;
-	}
-	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
-		desc = "SAS Broadcast Primitive";
-		break;
-	case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
-		desc = "SAS Init Device Status Change";
-		break;
-	case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW:
-		desc = "SAS Init Table Overflow";
-		break;
-	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
-		desc = "SAS Topology Change List";
-		break;
-	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
-		desc = "SAS Enclosure Device Status Change";
-		break;
-	case MPI2_EVENT_IR_VOLUME:
-		if (!ioc->hide_ir_msg)
-			desc = "IR Volume";
-		break;
-	case MPI2_EVENT_IR_PHYSICAL_DISK:
-		if (!ioc->hide_ir_msg)
-			desc = "IR Physical Disk";
-		break;
-	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
-		if (!ioc->hide_ir_msg)
-			desc = "IR Configuration Change List";
-		break;
-	case MPI2_EVENT_LOG_ENTRY_ADDED:
-		if (!ioc->hide_ir_msg)
-			desc = "Log Entry Added";
-		break;
-	case MPI2_EVENT_TEMP_THRESHOLD:
-		desc = "Temperature Threshold";
-		break;
-	}
-
-	if (!desc)
-		return;
-
-	printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, desc);
-}
-#endif
-
-/**
- * _base_sas_log_info - verbose translation of firmware log info
- * @ioc: per adapter object
- * @log_info: log info
- *
- * Return nothing.
- */
-static void
-_base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info)
-{
-	union loginfo_type {
-		u32	loginfo;
-		struct {
-			u32	subcode:16;
-			u32	code:8;
-			u32	originator:4;
-			u32	bus_type:4;
-		} dw;
-	};
-	union loginfo_type sas_loginfo;
-	char *originator_str = NULL;
-
-	sas_loginfo.loginfo = log_info;
-	if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
-		return;
-
-	/* each nexus loss loginfo */
-	if (log_info == 0x31170000)
-		return;
-
-	/* eat the loginfos associated with task aborts */
-	if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info ==
-	    0x31140000 || log_info == 0x31130000))
-		return;
-
-	switch (sas_loginfo.dw.originator) {
-	case 0:
-		originator_str = "IOP";
-		break;
-	case 1:
-		originator_str = "PL";
-		break;
-	case 2:
-		if (!ioc->hide_ir_msg)
-			originator_str = "IR";
-		else
-			originator_str = "WarpDrive";
-		break;
-	}
-
-	printk(MPT2SAS_WARN_FMT "log_info(0x%08x): originator(%s), "
-	    "code(0x%02x), sub_code(0x%04x)\n", ioc->name, log_info,
-	     originator_str, sas_loginfo.dw.code,
-	     sas_loginfo.dw.subcode);
-}
-
-/**
- * _base_display_reply_info -
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Return nothing.
- */
-static void
-_base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-    u32 reply)
-{
-	MPI2DefaultReply_t *mpi_reply;
-	u16 ioc_status;
-
-	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (unlikely(!mpi_reply)) {
-		printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
-			ioc->name, __FILE__, __LINE__, __func__);
-		return;
-	}
-	ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
-	    (ioc->logging_level & MPT_DEBUG_REPLY)) {
-		_base_sas_ioc_info(ioc , mpi_reply,
-		   mpt2sas_base_get_msg_frame(ioc, smid));
-	}
-#endif
-	if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
-		_base_sas_log_info(ioc, le32_to_cpu(mpi_reply->IOCLogInfo));
-}
-
-/**
- * mpt2sas_base_done - base internal command completion routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-u8
-mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-    u32 reply)
-{
-	MPI2DefaultReply_t *mpi_reply;
-
-	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
-		return 1;
-
-	if (ioc->base_cmds.status == MPT2_CMD_NOT_USED)
-		return 1;
-
-	ioc->base_cmds.status |= MPT2_CMD_COMPLETE;
-	if (mpi_reply) {
-		ioc->base_cmds.status |= MPT2_CMD_REPLY_VALID;
-		memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
-	}
-	ioc->base_cmds.status &= ~MPT2_CMD_PENDING;
-
-	complete(&ioc->base_cmds.done);
-	return 1;
-}
-
-/**
- * _base_async_event - main callback handler for firmware asyn events
- * @ioc: per adapter object
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Returns void.
- */
-static void
-_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
-{
-	Mpi2EventNotificationReply_t *mpi_reply;
-	Mpi2EventAckRequest_t *ack_request;
-	u16 smid;
-
-	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (!mpi_reply)
-		return;
-	if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
-		return;
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	_base_display_event_data(ioc, mpi_reply);
-#endif
-	if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
-		goto out;
-	smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		goto out;
-	}
-
-	ack_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
-	ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
-	ack_request->Event = mpi_reply->Event;
-	ack_request->EventContext = mpi_reply->EventContext;
-	ack_request->VF_ID = 0;  /* TODO */
-	ack_request->VP_ID = 0;
-	mpt2sas_base_put_smid_default(ioc, smid);
-
- out:
-
-	/* scsih callback handler */
-	mpt2sas_scsih_event_callback(ioc, msix_index, reply);
-
-	/* ctl callback handler */
-	mpt2sas_ctl_event_callback(ioc, msix_index, reply);
-
-	return;
-}
-
-/**
- * _base_get_cb_idx - obtain the callback index
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Return callback index.
- */
-static u8
-_base_get_cb_idx(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	int i;
-	u8 cb_idx;
-
-	if (smid < ioc->hi_priority_smid) {
-		i = smid - 1;
-		cb_idx = ioc->scsi_lookup[i].cb_idx;
-	} else if (smid < ioc->internal_smid) {
-		i = smid - ioc->hi_priority_smid;
-		cb_idx = ioc->hpr_lookup[i].cb_idx;
-	} else if (smid <= ioc->hba_queue_depth) {
-		i = smid - ioc->internal_smid;
-		cb_idx = ioc->internal_lookup[i].cb_idx;
-	} else
-		cb_idx = 0xFF;
-	return cb_idx;
-}
-
-/**
- * _base_mask_interrupts - disable interrupts
- * @ioc: per adapter object
- *
- * Disabling ResetIRQ, Reply and Doorbell Interrupts
- *
- * Return nothing.
- */
-static void
-_base_mask_interrupts(struct MPT2SAS_ADAPTER *ioc)
-{
-	u32 him_register;
-
-	ioc->mask_interrupts = 1;
-	him_register = readl(&ioc->chip->HostInterruptMask);
-	him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
-	writel(him_register, &ioc->chip->HostInterruptMask);
-	readl(&ioc->chip->HostInterruptMask);
-}
-
-/**
- * _base_unmask_interrupts - enable interrupts
- * @ioc: per adapter object
- *
- * Enabling only Reply Interrupts
- *
- * Return nothing.
- */
-static void
-_base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc)
-{
-	u32 him_register;
-
-	him_register = readl(&ioc->chip->HostInterruptMask);
-	him_register &= ~MPI2_HIM_RIM;
-	writel(him_register, &ioc->chip->HostInterruptMask);
-	ioc->mask_interrupts = 0;
-}
-
-union reply_descriptor {
-	u64 word;
-	struct {
-		u32 low;
-		u32 high;
-	} u;
-};
-
-/**
- * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
- * @irq: irq number (not used)
- * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
- * @r: pt_regs pointer (not used)
- *
- * Return IRQ_HANDLE if processed, else IRQ_NONE.
- */
-static irqreturn_t
-_base_interrupt(int irq, void *bus_id)
-{
-	struct adapter_reply_queue *reply_q = bus_id;
-	union reply_descriptor rd;
-	u32 completed_cmds;
-	u8 request_desript_type;
-	u16 smid;
-	u8 cb_idx;
-	u32 reply;
-	u8 msix_index = reply_q->msix_index;
-	struct MPT2SAS_ADAPTER *ioc = reply_q->ioc;
-	Mpi2ReplyDescriptorsUnion_t *rpf;
-	u8 rc;
-
-	if (ioc->mask_interrupts)
-		return IRQ_NONE;
-
-	if (!atomic_add_unless(&reply_q->busy, 1, 1))
-		return IRQ_NONE;
-
-	rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index];
-	request_desript_type = rpf->Default.ReplyFlags
-	     & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
-	if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) {
-		atomic_dec(&reply_q->busy);
-		return IRQ_NONE;
-	}
-
-	completed_cmds = 0;
-	cb_idx = 0xFF;
-	do {
-		rd.word = le64_to_cpu(rpf->Words);
-		if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
-			goto out;
-		reply = 0;
-		smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
-		if (request_desript_type ==
-		    MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
-			reply = le32_to_cpu
-				(rpf->AddressReply.ReplyFrameAddress);
-			if (reply > ioc->reply_dma_max_address ||
-			    reply < ioc->reply_dma_min_address)
-				reply = 0;
-		} else if (request_desript_type ==
-		    MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER)
-			goto next;
-		else if (request_desript_type ==
-		    MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS)
-			goto next;
-		if (smid) {
-			cb_idx = _base_get_cb_idx(ioc, smid);
-		if ((likely(cb_idx < MPT_MAX_CALLBACKS))
-			    && (likely(mpt_callbacks[cb_idx] != NULL))) {
-				rc = mpt_callbacks[cb_idx](ioc, smid,
-				    msix_index, reply);
-			if (reply)
-				_base_display_reply_info(ioc, smid,
-				    msix_index, reply);
-			if (rc)
-				mpt2sas_base_free_smid(ioc, smid);
-			}
-		}
-		if (!smid)
-			_base_async_event(ioc, msix_index, reply);
-
-		/* reply free queue handling */
-		if (reply) {
-			ioc->reply_free_host_index =
-			    (ioc->reply_free_host_index ==
-			    (ioc->reply_free_queue_depth - 1)) ?
-			    0 : ioc->reply_free_host_index + 1;
-			ioc->reply_free[ioc->reply_free_host_index] =
-			    cpu_to_le32(reply);
-			wmb();
-			writel(ioc->reply_free_host_index,
-			    &ioc->chip->ReplyFreeHostIndex);
-		}
-
- next:
-
-		rpf->Words = cpu_to_le64(ULLONG_MAX);
-		reply_q->reply_post_host_index =
-		    (reply_q->reply_post_host_index ==
-		    (ioc->reply_post_queue_depth - 1)) ? 0 :
-		    reply_q->reply_post_host_index + 1;
-		request_desript_type =
-		    reply_q->reply_post_free[reply_q->reply_post_host_index].
-		    Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
-		completed_cmds++;
-		if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
-			goto out;
-		if (!reply_q->reply_post_host_index)
-			rpf = reply_q->reply_post_free;
-		else
-			rpf++;
-	} while (1);
-
- out:
-
-	if (!completed_cmds) {
-		atomic_dec(&reply_q->busy);
-		return IRQ_NONE;
-	}
-	wmb();
-	if (ioc->is_warpdrive) {
-		writel(reply_q->reply_post_host_index,
-		ioc->reply_post_host_index[msix_index]);
-		atomic_dec(&reply_q->busy);
-		return IRQ_HANDLED;
-	}
-	writel(reply_q->reply_post_host_index | (msix_index <<
-	    MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex);
-	atomic_dec(&reply_q->busy);
-	return IRQ_HANDLED;
-}
-
-/**
- * _base_is_controller_msix_enabled - is controller support muli-reply queues
- * @ioc: per adapter object
- *
- */
-static inline int
-_base_is_controller_msix_enabled(struct MPT2SAS_ADAPTER *ioc)
-{
-	return (ioc->facts.IOCCapabilities &
-	    MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable;
-}
-
-/**
- * mpt2sas_base_flush_reply_queues - flushing the MSIX reply queues
- * @ioc: per adapter object
- * Context: ISR conext
- *
- * Called when a Task Management request has completed. We want
- * to flush the other reply queues so all the outstanding IO has been
- * completed back to OS before we process the TM completetion.
- *
- * Return nothing.
- */
-void
-mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct adapter_reply_queue *reply_q;
-
-	/* If MSIX capability is turned off
-	 * then multi-queues are not enabled
-	 */
-	if (!_base_is_controller_msix_enabled(ioc))
-		return;
-
-	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
-		if (ioc->shost_recovery)
-			return;
-		/* TMs are on msix_index == 0 */
-		if (reply_q->msix_index == 0)
-			continue;
-		_base_interrupt(reply_q->vector, (void *)reply_q);
-	}
-}
-
-/**
- * mpt2sas_base_release_callback_handler - clear interrupt callback handler
- * @cb_idx: callback index
- *
- * Return nothing.
- */
-void
-mpt2sas_base_release_callback_handler(u8 cb_idx)
-{
-	mpt_callbacks[cb_idx] = NULL;
-}
-
-/**
- * mpt2sas_base_register_callback_handler - obtain index for the interrupt callback handler
- * @cb_func: callback function
- *
- * Returns cb_func.
- */
-u8
-mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func)
-{
-	u8 cb_idx;
-
-	for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--)
-		if (mpt_callbacks[cb_idx] == NULL)
-			break;
-
-	mpt_callbacks[cb_idx] = cb_func;
-	return cb_idx;
-}
-
-/**
- * mpt2sas_base_initialize_callback_handler - initialize the interrupt callback handler
- *
- * Return nothing.
- */
-void
-mpt2sas_base_initialize_callback_handler(void)
-{
-	u8 cb_idx;
-
-	for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++)
-		mpt2sas_base_release_callback_handler(cb_idx);
-}
-
-/**
- * mpt2sas_base_build_zero_len_sge - build zero length sg entry
- * @ioc: per adapter object
- * @paddr: virtual address for SGE
- *
- * Create a zero length scatter gather entry to insure the IOCs hardware has
- * something to use if the target device goes brain dead and tries
- * to send data even when none is asked for.
- *
- * Return nothing.
- */
-void
-mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr)
-{
-	u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT |
-	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST |
-	    MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
-	    MPI2_SGE_FLAGS_SHIFT);
-	ioc->base_add_sg_single(paddr, flags_length, -1);
-}
-
-/**
- * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
- * @paddr: virtual address for SGE
- * @flags_length: SGE flags and data transfer length
- * @dma_addr: Physical address
- *
- * Return nothing.
- */
-static void
-_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr)
-{
-	Mpi2SGESimple32_t *sgel = paddr;
-
-	flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING |
-	    MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
-	sgel->FlagsLength = cpu_to_le32(flags_length);
-	sgel->Address = cpu_to_le32(dma_addr);
-}
-
-
-/**
- * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
- * @paddr: virtual address for SGE
- * @flags_length: SGE flags and data transfer length
- * @dma_addr: Physical address
- *
- * Return nothing.
- */
-static void
-_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr)
-{
-	Mpi2SGESimple64_t *sgel = paddr;
-
-	flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING |
-	    MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
-	sgel->FlagsLength = cpu_to_le32(flags_length);
-	sgel->Address = cpu_to_le64(dma_addr);
-}
-
-#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
-
-/**
- * _base_config_dma_addressing - set dma addressing
- * @ioc: per adapter object
- * @pdev: PCI device struct
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev)
-{
-	struct sysinfo s;
-	u64 consistent_dma_mask;
-
-	if (ioc->dma_mask)
-		consistent_dma_mask = DMA_BIT_MASK(64);
-	else
-		consistent_dma_mask = DMA_BIT_MASK(32);
-
-	if (sizeof(dma_addr_t) > 4) {
-		const uint64_t required_mask =
-		    dma_get_required_mask(&pdev->dev);
-		if ((required_mask > DMA_BIT_MASK(32)) &&
-		    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
-		    !pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) {
-			ioc->base_add_sg_single = &_base_add_sg_single_64;
-			ioc->sge_size = sizeof(Mpi2SGESimple64_t);
-			ioc->dma_mask = 64;
-			goto out;
-		}
-	}
-
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
-	    && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		ioc->base_add_sg_single = &_base_add_sg_single_32;
-		ioc->sge_size = sizeof(Mpi2SGESimple32_t);
-		ioc->dma_mask = 32;
-	} else
-		return -ENODEV;
-
- out:
-	si_meminfo(&s);
-	printk(MPT2SAS_INFO_FMT
-	    "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
-	    ioc->name, ioc->dma_mask, convert_to_kb(s.totalram));
-
-	return 0;
-}
-
-static int
-_base_change_consistent_dma_mask(struct MPT2SAS_ADAPTER *ioc,
-				  struct pci_dev *pdev)
-{
-	if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
-			return -ENODEV;
-	}
-	return 0;
-}
-/**
- * _base_check_enable_msix - checks MSIX capabable.
- * @ioc: per adapter object
- *
- * Check to see if card is capable of MSIX, and set number
- * of available msix vectors
- */
-static int
-_base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
-{
-	int base;
-	u16 message_control;
-
-
-	/* Check whether controller SAS2008 B0 controller,
-	   if it is SAS2008 B0 controller use IO-APIC instead of MSIX */
-	if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
-	    ioc->pdev->revision == 0x01) {
-		return -EINVAL;
-	}
-
-	base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
-	if (!base) {
-		dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not "
-		    "supported\n", ioc->name));
-		return -EINVAL;
-	}
-
-	/* get msix vector count */
-	/* NUMA_IO not supported for older controllers */
-	if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2004 ||
-	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 ||
-	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_1 ||
-	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_2 ||
-	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_3 ||
-	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_1 ||
-	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_2)
-		ioc->msix_vector_count = 1;
-	else {
-		pci_read_config_word(ioc->pdev, base + 2, &message_control);
-		ioc->msix_vector_count = (message_control & 0x3FF) + 1;
-	}
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "msix is supported, "
-	    "vector_count(%d)\n", ioc->name, ioc->msix_vector_count));
-
-	return 0;
-}
-
-/**
- * _base_free_irq - free irq
- * @ioc: per adapter object
- *
- * Freeing respective reply_queue from the list.
- */
-static void
-_base_free_irq(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct adapter_reply_queue *reply_q, *next;
-
-	if (list_empty(&ioc->reply_queue_list))
-		return;
-
-	list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
-		list_del(&reply_q->list);
-		irq_set_affinity_hint(reply_q->vector, NULL);
-		free_cpumask_var(reply_q->affinity_hint);
-		synchronize_irq(reply_q->vector);
-		free_irq(reply_q->vector, reply_q);
-		kfree(reply_q);
-	}
-}
-
-/**
- * _base_request_irq - request irq
- * @ioc: per adapter object
- * @index: msix index into vector table
- * @vector: irq vector
- *
- * Inserting respective reply_queue into the list.
- */
-static int
-_base_request_irq(struct MPT2SAS_ADAPTER *ioc, u8 index, u32 vector)
-{
-	struct adapter_reply_queue *reply_q;
-	int r;
-
-	reply_q =  kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL);
-	if (!reply_q) {
-		printk(MPT2SAS_ERR_FMT "unable to allocate memory %d!\n",
-		    ioc->name, (int)sizeof(struct adapter_reply_queue));
-		return -ENOMEM;
-	}
-	reply_q->ioc = ioc;
-	reply_q->msix_index = index;
-	reply_q->vector = vector;
-
-	if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
-		return -ENOMEM;
-	cpumask_clear(reply_q->affinity_hint);
-
-	atomic_set(&reply_q->busy, 0);
-	if (ioc->msix_enable)
-		snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
-		    MPT2SAS_DRIVER_NAME, ioc->id, index);
-	else
-		snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
-		    MPT2SAS_DRIVER_NAME, ioc->id);
-	r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name,
-	    reply_q);
-	if (r) {
-		printk(MPT2SAS_ERR_FMT "unable to allocate interrupt %d!\n",
-		    reply_q->name, vector);
-		kfree(reply_q);
-		return -EBUSY;
-	}
-
-	INIT_LIST_HEAD(&reply_q->list);
-	list_add_tail(&reply_q->list, &ioc->reply_queue_list);
-	return 0;
-}
-
-/**
- * _base_assign_reply_queues - assigning msix index for each cpu
- * @ioc: per adapter object
- *
- * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
- *
- * It would nice if we could call irq_set_affinity, however it is not
- * an exported symbol
- */
-static void
-_base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc)
-{
-	unsigned int cpu, nr_cpus, nr_msix, index = 0;
-	struct adapter_reply_queue *reply_q;
-
-	if (!_base_is_controller_msix_enabled(ioc))
-		return;
-
-	memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz);
-
-	nr_cpus = num_online_cpus();
-	nr_msix = ioc->reply_queue_count = min(ioc->reply_queue_count,
-					       ioc->facts.MaxMSIxVectors);
-	if (!nr_msix)
-		return;
-
-	cpu = cpumask_first(cpu_online_mask);
-
-	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
-
-		unsigned int i, group = nr_cpus / nr_msix;
-
-		if (cpu >= nr_cpus)
-			break;
-
-		if (index < nr_cpus % nr_msix)
-			group++;
-
-		for (i = 0 ; i < group ; i++) {
-			ioc->cpu_msix_table[cpu] = index;
-			cpumask_or(reply_q->affinity_hint,
-				   reply_q->affinity_hint, get_cpu_mask(cpu));
-			cpu = cpumask_next(cpu, cpu_online_mask);
-		}
-
-		if (irq_set_affinity_hint(reply_q->vector,
-					   reply_q->affinity_hint))
-			dinitprintk(ioc, pr_info(MPT2SAS_FMT
-			    "error setting affinity hint for irq vector %d\n",
-			    ioc->name, reply_q->vector));
-		index++;
-	}
-}
-
-/**
- * _base_disable_msix - disables msix
- * @ioc: per adapter object
- *
- */
-static void
-_base_disable_msix(struct MPT2SAS_ADAPTER *ioc)
-{
-	if (ioc->msix_enable) {
-		pci_disable_msix(ioc->pdev);
-		ioc->msix_enable = 0;
-	}
-}
-
-/**
- * _base_enable_msix - enables msix, failback to io_apic
- * @ioc: per adapter object
- *
- */
-static int
-_base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct msix_entry *entries, *a;
-	int r;
-	int i;
-	u8 try_msix = 0;
-
-	if (msix_disable == -1 || msix_disable == 0)
-		try_msix = 1;
-
-	if (!try_msix)
-		goto try_ioapic;
-
-	if (_base_check_enable_msix(ioc) != 0)
-		goto try_ioapic;
-
-	ioc->reply_queue_count = min_t(int, ioc->cpu_count,
-	    ioc->msix_vector_count);
-
-	if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
-		max_msix_vectors = 8;
-
-	if (max_msix_vectors > 0) {
-		ioc->reply_queue_count = min_t(int, max_msix_vectors,
-		    ioc->reply_queue_count);
-		ioc->msix_vector_count = ioc->reply_queue_count;
-	} else if (max_msix_vectors == 0)
-		goto try_ioapic;
-
-	printk(MPT2SAS_INFO_FMT
-	"MSI-X vectors supported: %d, no of cores: %d, max_msix_vectors: %d\n",
-	 ioc->name, ioc->msix_vector_count, ioc->cpu_count, max_msix_vectors);
-
-	entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry),
-	    GFP_KERNEL);
-	if (!entries) {
-		dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "kcalloc "
-		    "failed @ at %s:%d/%s() !!!\n", ioc->name, __FILE__,
-		    __LINE__, __func__));
-		goto try_ioapic;
-	}
-
-	for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++)
-		a->entry = i;
-
-	r = pci_enable_msix_exact(ioc->pdev, entries, ioc->reply_queue_count);
-	if (r) {
-		dfailprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "pci_enable_msix_exact failed (r=%d) !!!\n", ioc->name, r));
-		kfree(entries);
-		goto try_ioapic;
-	}
-
-	ioc->msix_enable = 1;
-	for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) {
-		r = _base_request_irq(ioc, i, a->vector);
-		if (r) {
-			_base_free_irq(ioc);
-			_base_disable_msix(ioc);
-			kfree(entries);
-			goto try_ioapic;
-		}
-	}
-
-	kfree(entries);
-	return 0;
-
-/* failback to io_apic interrupt routing */
- try_ioapic:
-
-	ioc->reply_queue_count = 1;
-	r = _base_request_irq(ioc, 0, ioc->pdev->irq);
-
-	return r;
-}
-
-/**
- * mpt2sas_base_map_resources - map in controller resources (io/irq/memap)
- * @ioc: per adapter object
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct pci_dev *pdev = ioc->pdev;
-	u32 memap_sz;
-	u32 pio_sz;
-	int i, r = 0;
-	u64 pio_chip = 0;
-	u64 chip_phys = 0;
-	struct adapter_reply_queue *reply_q;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n",
-	    ioc->name, __func__));
-
-	ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
-	if (pci_enable_device_mem(pdev)) {
-		printk(MPT2SAS_WARN_FMT "pci_enable_device_mem: "
-		    "failed\n", ioc->name);
-		ioc->bars = 0;
-		return -ENODEV;
-	}
-
-
-	if (pci_request_selected_regions(pdev, ioc->bars,
-	    MPT2SAS_DRIVER_NAME)) {
-		printk(MPT2SAS_WARN_FMT "pci_request_selected_regions: "
-		    "failed\n", ioc->name);
-		ioc->bars = 0;
-		r = -ENODEV;
-		goto out_fail;
-	}
-
-	/* AER (Advanced Error Reporting) hooks */
-	pci_enable_pcie_error_reporting(pdev);
-
-	pci_set_master(pdev);
-
-	if (_base_config_dma_addressing(ioc, pdev) != 0) {
-		printk(MPT2SAS_WARN_FMT "no suitable DMA mask for %s\n",
-		    ioc->name, pci_name(pdev));
-		r = -ENODEV;
-		goto out_fail;
-	}
-
-	for (i = 0, memap_sz = 0, pio_sz = 0; (i < DEVICE_COUNT_RESOURCE) &&
-	     (!memap_sz || !pio_sz); i++) {
-		if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
-			if (pio_sz)
-				continue;
-			pio_chip = (u64)pci_resource_start(pdev, i);
-			pio_sz = pci_resource_len(pdev, i);
-		} else {
-			if (memap_sz)
-				continue;
-			/* verify memory resource is valid before using */
-			if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
-				ioc->chip_phys = pci_resource_start(pdev, i);
-				chip_phys = (u64)ioc->chip_phys;
-				memap_sz = pci_resource_len(pdev, i);
-				ioc->chip = ioremap(ioc->chip_phys, memap_sz);
-			}
-		}
-	}
-
-	if (ioc->chip == NULL) {
-		printk(MPT2SAS_ERR_FMT "unable to map adapter memory! "
-		       "or resource not found\n", ioc->name);
-		r = -EINVAL;
-		goto out_fail;
-	}
-
-	_base_mask_interrupts(ioc);
-
-	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
-	if (r)
-		goto out_fail;
-
-	if (!ioc->rdpq_array_enable_assigned) {
-		ioc->rdpq_array_enable = ioc->rdpq_array_capable;
-		ioc->rdpq_array_enable_assigned = 1;
-	}
-
-	r = _base_enable_msix(ioc);
-	if (r)
-		goto out_fail;
-
-	list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
-		printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n",
-		    reply_q->name,  ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
-		    "IO-APIC enabled"), reply_q->vector);
-
-	printk(MPT2SAS_INFO_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
-	    ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz);
-	printk(MPT2SAS_INFO_FMT "ioport(0x%016llx), size(%d)\n",
-	    ioc->name, (unsigned long long)pio_chip, pio_sz);
-
-	/* Save PCI configuration state for recovery from PCI AER/EEH errors */
-	pci_save_state(pdev);
-
-	return 0;
-
- out_fail:
-	if (ioc->chip_phys)
-		iounmap(ioc->chip);
-	ioc->chip_phys = 0;
-	pci_release_selected_regions(ioc->pdev, ioc->bars);
-	pci_disable_pcie_error_reporting(pdev);
-	pci_disable_device(pdev);
-	return r;
-}
-
-/**
- * mpt2sas_base_get_msg_frame - obtain request mf pointer
- * @ioc: per adapter object
- * @smid: system request message index(smid zero is invalid)
- *
- * Returns virt pointer to message frame.
- */
-void *
-mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	return (void *)(ioc->request + (smid * ioc->request_sz));
-}
-
-/**
- * mpt2sas_base_get_sense_buffer - obtain a sense buffer assigned to a mf request
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns virt pointer to sense buffer.
- */
-void *
-mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
-}
-
-/**
- * mpt2sas_base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns phys pointer to the low 32bit address of the sense buffer.
- */
-__le32
-mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	return cpu_to_le32(ioc->sense_dma +
-			((smid - 1) * SCSI_SENSE_BUFFERSIZE));
-}
-
-/**
- * mpt2sas_base_get_reply_virt_addr - obtain reply frames virt address
- * @ioc: per adapter object
- * @phys_addr: lower 32 physical addr of the reply
- *
- * Converts 32bit lower physical addr into a virt address.
- */
-void *
-mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr)
-{
-	if (!phys_addr)
-		return NULL;
-	return ioc->reply + (phys_addr - (u32)ioc->reply_dma);
-}
-
-/**
- * mpt2sas_base_get_smid - obtain a free smid from internal queue
- * @ioc: per adapter object
- * @cb_idx: callback index
- *
- * Returns smid (zero is invalid)
- */
-u16
-mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
-{
-	unsigned long flags;
-	struct request_tracker *request;
-	u16 smid;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	if (list_empty(&ioc->internal_free_list)) {
-		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-		printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
-		    ioc->name, __func__);
-		return 0;
-	}
-
-	request = list_entry(ioc->internal_free_list.next,
-	    struct request_tracker, tracker_list);
-	request->cb_idx = cb_idx;
-	smid = request->smid;
-	list_del(&request->tracker_list);
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-	return smid;
-}
-
-/**
- * mpt2sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
- * @ioc: per adapter object
- * @cb_idx: callback index
- * @scmd: pointer to scsi command object
- *
- * Returns smid (zero is invalid)
- */
-u16
-mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
-    struct scsi_cmnd *scmd)
-{
-	unsigned long flags;
-	struct scsiio_tracker *request;
-	u16 smid;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	if (list_empty(&ioc->free_list)) {
-		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-		printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
-		    ioc->name, __func__);
-		return 0;
-	}
-
-	request = list_entry(ioc->free_list.next,
-	    struct scsiio_tracker, tracker_list);
-	request->scmd = scmd;
-	request->cb_idx = cb_idx;
-	smid = request->smid;
-	list_del(&request->tracker_list);
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-	return smid;
-}
-
-/**
- * mpt2sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
- * @ioc: per adapter object
- * @cb_idx: callback index
- *
- * Returns smid (zero is invalid)
- */
-u16
-mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
-{
-	unsigned long flags;
-	struct request_tracker *request;
-	u16 smid;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	if (list_empty(&ioc->hpr_free_list)) {
-		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-		return 0;
-	}
-
-	request = list_entry(ioc->hpr_free_list.next,
-	    struct request_tracker, tracker_list);
-	request->cb_idx = cb_idx;
-	smid = request->smid;
-	list_del(&request->tracker_list);
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-	return smid;
-}
-
-
-/**
- * mpt2sas_base_free_smid - put smid back on free_list
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Return nothing.
- */
-void
-mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	unsigned long flags;
-	int i;
-	struct chain_tracker *chain_req, *next;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	if (smid < ioc->hi_priority_smid) {
-		/* scsiio queue */
-		i = smid - 1;
-		if (!list_empty(&ioc->scsi_lookup[i].chain_list)) {
-			list_for_each_entry_safe(chain_req, next,
-			    &ioc->scsi_lookup[i].chain_list, tracker_list) {
-				list_del_init(&chain_req->tracker_list);
-				list_add(&chain_req->tracker_list,
-				    &ioc->free_chain_list);
-			}
-		}
-		ioc->scsi_lookup[i].cb_idx = 0xFF;
-		ioc->scsi_lookup[i].scmd = NULL;
-		ioc->scsi_lookup[i].direct_io = 0;
-		list_add(&ioc->scsi_lookup[i].tracker_list,
-		    &ioc->free_list);
-		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-
-		/*
-		 * See _wait_for_commands_to_complete() call with regards
-		 * to this code.
-		 */
-		if (ioc->shost_recovery && ioc->pending_io_count) {
-			if (ioc->pending_io_count == 1)
-				wake_up(&ioc->reset_wq);
-			ioc->pending_io_count--;
-		}
-		return;
-	} else if (smid < ioc->internal_smid) {
-		/* hi-priority */
-		i = smid - ioc->hi_priority_smid;
-		ioc->hpr_lookup[i].cb_idx = 0xFF;
-		list_add(&ioc->hpr_lookup[i].tracker_list,
-		    &ioc->hpr_free_list);
-	} else if (smid <= ioc->hba_queue_depth) {
-		/* internal queue */
-		i = smid - ioc->internal_smid;
-		ioc->internal_lookup[i].cb_idx = 0xFF;
-		list_add(&ioc->internal_lookup[i].tracker_list,
-		    &ioc->internal_free_list);
-	}
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-}
-
-/**
- * _base_writeq - 64 bit write to MMIO
- * @ioc: per adapter object
- * @b: data payload
- * @addr: address in MMIO space
- * @writeq_lock: spin lock
- *
- * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
- * care of 32 bit environment where its not quarenteed to send the entire word
- * in one transfer.
- */
-#ifndef writeq
-static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
-    spinlock_t *writeq_lock)
-{
-	unsigned long flags;
-	__u64 data_out = cpu_to_le64(b);
-
-	spin_lock_irqsave(writeq_lock, flags);
-	writel((u32)(data_out), addr);
-	writel((u32)(data_out >> 32), (addr + 4));
-	spin_unlock_irqrestore(writeq_lock, flags);
-}
-#else
-static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
-    spinlock_t *writeq_lock)
-{
-	writeq(cpu_to_le64(b), addr);
-}
-#endif
-
-static inline u8
-_base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
-{
-	return ioc->cpu_msix_table[raw_smp_processor_id()];
-}
-
-/**
- * mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
- * @ioc: per adapter object
- * @smid: system request message index
- * @handle: device handle
- *
- * Return nothing.
- */
-void
-mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle)
-{
-	Mpi2RequestDescriptorUnion_t descriptor;
-	u64 *request = (u64 *)&descriptor;
-
-
-	descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
-	descriptor.SCSIIO.MSIxIndex =  _base_get_msix_index(ioc);
-	descriptor.SCSIIO.SMID = cpu_to_le16(smid);
-	descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
-	descriptor.SCSIIO.LMID = 0;
-	_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
-	    &ioc->scsi_lookup_lock);
-}
-
-
-/**
- * mpt2sas_base_put_smid_hi_priority - send Task Management request to firmware
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Return nothing.
- */
-void
-mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	Mpi2RequestDescriptorUnion_t descriptor;
-	u64 *request = (u64 *)&descriptor;
-
-	descriptor.HighPriority.RequestFlags =
-	    MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
-	descriptor.HighPriority.MSIxIndex =  0;
-	descriptor.HighPriority.SMID = cpu_to_le16(smid);
-	descriptor.HighPriority.LMID = 0;
-	descriptor.HighPriority.Reserved1 = 0;
-	_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
-	    &ioc->scsi_lookup_lock);
-}
-
-/**
- * mpt2sas_base_put_smid_default - Default, primarily used for config pages
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Return nothing.
- */
-void
-mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	Mpi2RequestDescriptorUnion_t descriptor;
-	u64 *request = (u64 *)&descriptor;
-
-	descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
-	descriptor.Default.MSIxIndex =  _base_get_msix_index(ioc);
-	descriptor.Default.SMID = cpu_to_le16(smid);
-	descriptor.Default.LMID = 0;
-	descriptor.Default.DescriptorTypeDependent = 0;
-	_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
-	    &ioc->scsi_lookup_lock);
-}
-
-/**
- * mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware
- * @ioc: per adapter object
- * @smid: system request message index
- * @io_index: value used to track the IO
- *
- * Return nothing.
- */
-void
-mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-    u16 io_index)
-{
-	Mpi2RequestDescriptorUnion_t descriptor;
-	u64 *request = (u64 *)&descriptor;
-
-	descriptor.SCSITarget.RequestFlags =
-	    MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET;
-	descriptor.SCSITarget.MSIxIndex =  _base_get_msix_index(ioc);
-	descriptor.SCSITarget.SMID = cpu_to_le16(smid);
-	descriptor.SCSITarget.LMID = 0;
-	descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index);
-	_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
-	    &ioc->scsi_lookup_lock);
-}
-
-/**
- * _base_display_dell_branding - Disply branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
-{
-	char dell_branding[MPT2SAS_DELL_BRANDING_SIZE];
-
-	if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
-		return;
-
-	memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE);
-	switch (ioc->pdev->subsystem_device) {
-	case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
-		strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING,
-		    MPT2SAS_DELL_BRANDING_SIZE - 1);
-		break;
-	case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
-		strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING,
-		    MPT2SAS_DELL_BRANDING_SIZE - 1);
-		break;
-	case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
-		strncpy(dell_branding,
-		    MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING,
-		    MPT2SAS_DELL_BRANDING_SIZE - 1);
-		break;
-	case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
-		strncpy(dell_branding,
-		    MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING,
-		    MPT2SAS_DELL_BRANDING_SIZE - 1);
-		break;
-	case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
-		strncpy(dell_branding,
-		    MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING,
-		    MPT2SAS_DELL_BRANDING_SIZE - 1);
-		break;
-	case MPT2SAS_DELL_PERC_H200_SSDID:
-		strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING,
-		    MPT2SAS_DELL_BRANDING_SIZE - 1);
-		break;
-	case MPT2SAS_DELL_6GBPS_SAS_SSDID:
-		strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING,
-		    MPT2SAS_DELL_BRANDING_SIZE - 1);
-		break;
-	default:
-		sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device);
-		break;
-	}
-
-	printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X),"
-	    " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding,
-	    ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor,
-	    ioc->pdev->subsystem_device);
-}
-
-/**
- * _base_display_intel_branding - Display branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc)
-{
-	if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
-		return;
-
-	switch (ioc->pdev->device) {
-	case MPI2_MFGPAGE_DEVID_SAS2008:
-		switch (ioc->pdev->subsystem_device) {
-		case MPT2SAS_INTEL_RMS2LL080_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_INTEL_RMS2LL080_BRANDING);
-			break;
-		case MPT2SAS_INTEL_RMS2LL040_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_INTEL_RMS2LL040_BRANDING);
-			break;
-		case MPT2SAS_INTEL_SSD910_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_INTEL_SSD910_BRANDING);
-			break;
-		default:
-			break;
-		}
-	case MPI2_MFGPAGE_DEVID_SAS2308_2:
-		switch (ioc->pdev->subsystem_device) {
-		case MPT2SAS_INTEL_RS25GB008_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_INTEL_RS25GB008_BRANDING);
-			break;
-		case MPT2SAS_INTEL_RMS25JB080_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_INTEL_RMS25JB080_BRANDING);
-			break;
-		case MPT2SAS_INTEL_RMS25JB040_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_INTEL_RMS25JB040_BRANDING);
-			break;
-		case MPT2SAS_INTEL_RMS25KB080_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_INTEL_RMS25KB080_BRANDING);
-			break;
-		case MPT2SAS_INTEL_RMS25KB040_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_INTEL_RMS25KB040_BRANDING);
-			break;
-		case MPT2SAS_INTEL_RMS25LB040_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_INTEL_RMS25LB040_BRANDING);
-			break;
-		case MPT2SAS_INTEL_RMS25LB080_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_INTEL_RMS25LB080_BRANDING);
-			break;
-		default:
-			break;
-		}
-	default:
-		break;
-	}
-}
-
-/**
- * _base_display_hp_branding - Display branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_hp_branding(struct MPT2SAS_ADAPTER *ioc)
-{
-	if (ioc->pdev->subsystem_vendor != MPT2SAS_HP_3PAR_SSVID)
-		return;
-
-	switch (ioc->pdev->device) {
-	case MPI2_MFGPAGE_DEVID_SAS2004:
-		switch (ioc->pdev->subsystem_device) {
-		case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING);
-			break;
-		default:
-			break;
-		}
-	case MPI2_MFGPAGE_DEVID_SAS2308_2:
-		switch (ioc->pdev->subsystem_device) {
-		case MPT2SAS_HP_2_4_INTERNAL_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_HP_2_4_INTERNAL_BRANDING);
-			break;
-		case MPT2SAS_HP_2_4_EXTERNAL_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_HP_2_4_EXTERNAL_BRANDING);
-			break;
-		case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING);
-			break;
-		case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID:
-			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING);
-			break;
-		default:
-			break;
-		}
-	default:
-		break;
-	}
-}
-
-/**
- * _base_display_ioc_capabilities - Disply IOC's capabilities.
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
-{
-	int i = 0;
-	char desc[16];
-	u32 iounit_pg1_flags;
-	u32 bios_version;
-
-	bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
-	strncpy(desc, ioc->manu_pg0.ChipName, 16);
-	printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "
-	   "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
-	    ioc->name, desc,
-	   (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
-	   (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
-	   (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
-	   ioc->facts.FWVersion.Word & 0x000000FF,
-	   ioc->pdev->revision,
-	   (bios_version & 0xFF000000) >> 24,
-	   (bios_version & 0x00FF0000) >> 16,
-	   (bios_version & 0x0000FF00) >> 8,
-	    bios_version & 0x000000FF);
-
-	_base_display_dell_branding(ioc);
-	_base_display_intel_branding(ioc);
-	_base_display_hp_branding(ioc);
-
-	printk(MPT2SAS_INFO_FMT "Protocol=(", ioc->name);
-
-	if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
-		printk("Initiator");
-		i++;
-	}
-
-	if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) {
-		printk("%sTarget", i ? "," : "");
-		i++;
-	}
-
-	i = 0;
-	printk("), ");
-	printk("Capabilities=(");
-
-	if (!ioc->hide_ir_msg) {
-		if (ioc->facts.IOCCapabilities &
-		    MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
-			printk("Raid");
-			i++;
-		}
-	}
-
-	if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
-		printk("%sTLR", i ? "," : "");
-		i++;
-	}
-
-	if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) {
-		printk("%sMulticast", i ? "," : "");
-		i++;
-	}
-
-	if (ioc->facts.IOCCapabilities &
-	    MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) {
-		printk("%sBIDI Target", i ? "," : "");
-		i++;
-	}
-
-	if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) {
-		printk("%sEEDP", i ? "," : "");
-		i++;
-	}
-
-	if (ioc->facts.IOCCapabilities &
-	    MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) {
-		printk("%sSnapshot Buffer", i ? "," : "");
-		i++;
-	}
-
-	if (ioc->facts.IOCCapabilities &
-	    MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) {
-		printk("%sDiag Trace Buffer", i ? "," : "");
-		i++;
-	}
-
-	if (ioc->facts.IOCCapabilities &
-	    MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) {
-		printk(KERN_INFO "%sDiag Extended Buffer", i ? "," : "");
-		i++;
-	}
-
-	if (ioc->facts.IOCCapabilities &
-	    MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
-		printk("%sTask Set Full", i ? "," : "");
-		i++;
-	}
-
-	iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
-	if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) {
-		printk("%sNCQ", i ? "," : "");
-		i++;
-	}
-
-	printk(")\n");
-}
-
-/**
- * mpt2sas_base_update_missing_delay - change the missing delay timers
- * @ioc: per adapter object
- * @device_missing_delay: amount of time till device is reported missing
- * @io_missing_delay: interval IO is returned when there is a missing device
- *
- * Return nothing.
- *
- * Passed on the command line, this function will modify the device missing
- * delay, as well as the io missing delay. This should be called at driver
- * load time.
- */
-void
-mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
-	u16 device_missing_delay, u8 io_missing_delay)
-{
-	u16 dmd, dmd_new, dmd_orignal;
-	u8 io_missing_delay_original;
-	u16 sz;
-	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
-	Mpi2ConfigReply_t mpi_reply;
-	u8 num_phys = 0;
-	u16 ioc_status;
-
-	mpt2sas_config_get_number_hba_phys(ioc, &num_phys);
-	if (!num_phys)
-		return;
-
-	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
-	    sizeof(Mpi2SasIOUnit1PhyData_t));
-	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
-	if (!sas_iounit_pg1) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-	if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
-	    sas_iounit_pg1, sz))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-
-	/* device missing delay */
-	dmd = sas_iounit_pg1->ReportDeviceMissingDelay;
-	if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
-		dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
-	else
-		dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
-	dmd_orignal = dmd;
-	if (device_missing_delay > 0x7F) {
-		dmd = (device_missing_delay > 0x7F0) ? 0x7F0 :
-		    device_missing_delay;
-		dmd = dmd / 16;
-		dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16;
-	} else
-		dmd = device_missing_delay;
-	sas_iounit_pg1->ReportDeviceMissingDelay = dmd;
-
-	/* io missing delay */
-	io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay;
-	sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay;
-
-	if (!mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
-	    sz)) {
-		if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
-			dmd_new = (dmd &
-			    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
-		else
-			dmd_new =
-		    dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
-		printk(MPT2SAS_INFO_FMT "device_missing_delay: old(%d), "
-		    "new(%d)\n", ioc->name, dmd_orignal, dmd_new);
-		printk(MPT2SAS_INFO_FMT "ioc_missing_delay: old(%d), "
-		    "new(%d)\n", ioc->name, io_missing_delay_original,
-		    io_missing_delay);
-		ioc->device_missing_delay = dmd_new;
-		ioc->io_missing_delay = io_missing_delay;
-	}
-
-out:
-	kfree(sas_iounit_pg1);
-}
-
-/**
- * _base_static_config_pages - static start of day config pages
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
-{
-	Mpi2ConfigReply_t mpi_reply;
-	u32 iounit_pg1_flags;
-
-	mpt2sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
-	if (ioc->ir_firmware)
-		mpt2sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
-		    &ioc->manu_pg10);
-	mpt2sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
-	mpt2sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
-	mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
-	mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
-	mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
-	mpt2sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
-	_base_display_ioc_capabilities(ioc);
-
-	/*
-	 * Enable task_set_full handling in iounit_pg1 when the
-	 * facts capabilities indicate that its supported.
-	 */
-	iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
-	if ((ioc->facts.IOCCapabilities &
-	    MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING))
-		iounit_pg1_flags &=
-		    ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
-	else
-		iounit_pg1_flags |=
-		    MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
-	ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
-	mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
-
-	if (ioc->iounit_pg8.NumSensors)
-		ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
-}
-
-/**
- * _base_release_memory_pools - release memory
- * @ioc: per adapter object
- *
- * Free memory allocated from _base_allocate_memory_pools.
- *
- * Return nothing.
- */
-static void
-_base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
-{
-	int i = 0;
-	struct reply_post_struct *rps;
-
-	dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	if (ioc->request) {
-		pci_free_consistent(ioc->pdev, ioc->request_dma_sz,
-		    ioc->request,  ioc->request_dma);
-		dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "request_pool(0x%p)"
-		    ": free\n", ioc->name, ioc->request));
-		ioc->request = NULL;
-	}
-
-	if (ioc->sense) {
-		pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
-		if (ioc->sense_dma_pool)
-			pci_pool_destroy(ioc->sense_dma_pool);
-		dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_pool(0x%p)"
-		    ": free\n", ioc->name, ioc->sense));
-		ioc->sense = NULL;
-	}
-
-	if (ioc->reply) {
-		pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
-		if (ioc->reply_dma_pool)
-			pci_pool_destroy(ioc->reply_dma_pool);
-		dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_pool(0x%p)"
-		     ": free\n", ioc->name, ioc->reply));
-		ioc->reply = NULL;
-	}
-
-	if (ioc->reply_free) {
-		pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
-		    ioc->reply_free_dma);
-		if (ioc->reply_free_dma_pool)
-			pci_pool_destroy(ioc->reply_free_dma_pool);
-		dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_pool"
-		    "(0x%p): free\n", ioc->name, ioc->reply_free));
-		ioc->reply_free = NULL;
-	}
-
-	if (ioc->reply_post) {
-		do {
-			rps = &ioc->reply_post[i];
-			if (rps->reply_post_free) {
-				pci_pool_free(
-				    ioc->reply_post_free_dma_pool,
-				    rps->reply_post_free,
-				    rps->reply_post_free_dma);
-				dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
-				    "reply_post_free_pool(0x%p): free\n",
-				    ioc->name, rps->reply_post_free));
-				rps->reply_post_free = NULL;
-			}
-		} while (ioc->rdpq_array_enable &&
-			   (++i < ioc->reply_queue_count));
-
-		if (ioc->reply_post_free_dma_pool)
-			pci_pool_destroy(ioc->reply_post_free_dma_pool);
-		kfree(ioc->reply_post);
-	}
-
-	if (ioc->config_page) {
-		dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "config_page(0x%p): free\n", ioc->name,
-		    ioc->config_page));
-		pci_free_consistent(ioc->pdev, ioc->config_page_sz,
-		    ioc->config_page, ioc->config_page_dma);
-	}
-
-	if (ioc->scsi_lookup) {
-		free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages);
-		ioc->scsi_lookup = NULL;
-	}
-	kfree(ioc->hpr_lookup);
-	kfree(ioc->internal_lookup);
-	if (ioc->chain_lookup) {
-		for (i = 0; i < ioc->chain_depth; i++) {
-			if (ioc->chain_lookup[i].chain_buffer)
-				pci_pool_free(ioc->chain_dma_pool,
-				    ioc->chain_lookup[i].chain_buffer,
-				    ioc->chain_lookup[i].chain_buffer_dma);
-		}
-		if (ioc->chain_dma_pool)
-			pci_pool_destroy(ioc->chain_dma_pool);
-		free_pages((ulong)ioc->chain_lookup, ioc->chain_pages);
-		ioc->chain_lookup = NULL;
-	}
-}
-
-
-/**
- * _base_allocate_memory_pools - allocate start of day memory pools
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 success, anything else error
- */
-static int
-_base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
-{
-	struct mpt2sas_facts *facts;
-	u16 max_sge_elements;
-	u16 chains_needed_per_io;
-	u32 sz, total_sz, reply_post_free_sz;
-	u32 retry_sz;
-	u16 max_request_credit;
-	int i;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	retry_sz = 0;
-	facts = &ioc->facts;
-
-	/* command line tunables  for max sgl entries */
-	if (max_sgl_entries != -1) {
-		ioc->shost->sg_tablesize =  min_t(unsigned short,
-			     max_sgl_entries, SCSI_MAX_SG_CHAIN_SEGMENTS);
-		if (ioc->shost->sg_tablesize > MPT2SAS_SG_DEPTH)
-			printk(MPT2SAS_WARN_FMT
-			 "sg_tablesize(%u) is bigger than kernel defined"
-			 " SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
-			  ioc->shost->sg_tablesize, MPT2SAS_SG_DEPTH);
-	} else {
-		ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH;
-	}
-
-	/* command line tunables  for max controller queue depth */
-	if (max_queue_depth != -1 && max_queue_depth != 0) {
-		max_request_credit = min_t(u16, max_queue_depth +
-			ioc->hi_priority_depth + ioc->internal_depth,
-			facts->RequestCredit);
-		if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
-			max_request_credit =  MAX_HBA_QUEUE_DEPTH;
-	} else
-		max_request_credit = min_t(u16, facts->RequestCredit,
-		    MAX_HBA_QUEUE_DEPTH);
-
-	ioc->hba_queue_depth = max_request_credit;
-	ioc->hi_priority_depth = facts->HighPriorityCredit;
-	ioc->internal_depth = ioc->hi_priority_depth + 5;
-
-	/* request frame size */
-	ioc->request_sz = facts->IOCRequestFrameSize * 4;
-
-	/* reply frame size */
-	ioc->reply_sz = facts->ReplyFrameSize * 4;
-
- retry_allocation:
-	total_sz = 0;
-	/* calculate number of sg elements left over in the 1st frame */
-	max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) -
-	    sizeof(Mpi2SGEIOUnion_t)) + ioc->sge_size);
-	ioc->max_sges_in_main_message = max_sge_elements/ioc->sge_size;
-
-	/* now do the same for a chain buffer */
-	max_sge_elements = ioc->request_sz - ioc->sge_size;
-	ioc->max_sges_in_chain_message = max_sge_elements/ioc->sge_size;
-
-	ioc->chain_offset_value_for_main_message =
-	    ((sizeof(Mpi2SCSIIORequest_t) - sizeof(Mpi2SGEIOUnion_t)) +
-	     (ioc->max_sges_in_chain_message * ioc->sge_size)) / 4;
-
-	/*
-	 *  MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
-	 */
-	chains_needed_per_io = ((ioc->shost->sg_tablesize -
-	   ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message)
-	    + 1;
-	if (chains_needed_per_io > facts->MaxChainDepth) {
-		chains_needed_per_io = facts->MaxChainDepth;
-		ioc->shost->sg_tablesize = min_t(u16,
-		ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message
-		* chains_needed_per_io), ioc->shost->sg_tablesize);
-	}
-	ioc->chains_needed_per_io = chains_needed_per_io;
-
-	/* reply free queue sizing - taking into account for 64 FW events */
-	ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
-
-	/* calculate reply descriptor post queue depth */
-	ioc->reply_post_queue_depth = ioc->hba_queue_depth +
-					ioc->reply_free_queue_depth +  1;
-	/* align the reply post queue on the next 16 count boundary */
-	if (ioc->reply_post_queue_depth % 16)
-		ioc->reply_post_queue_depth += 16 -
-			(ioc->reply_post_queue_depth % 16);
-
-
-	if (ioc->reply_post_queue_depth >
-	    facts->MaxReplyDescriptorPostQueueDepth) {
-		ioc->reply_post_queue_depth =
-			facts->MaxReplyDescriptorPostQueueDepth -
-		    (facts->MaxReplyDescriptorPostQueueDepth % 16);
-		ioc->hba_queue_depth =
-			((ioc->reply_post_queue_depth - 64) / 2) - 1;
-		ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
-	}
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: "
-	    "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
-	    "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
-	    ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
-	    ioc->chains_needed_per_io));
-
-	/* reply post queue, 16 byte align */
-	reply_post_free_sz = ioc->reply_post_queue_depth *
-	    sizeof(Mpi2DefaultReplyDescriptor_t);
-
-	sz = reply_post_free_sz;
-	if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable)
-		sz *= ioc->reply_queue_count;
-
-	ioc->reply_post = kcalloc((ioc->rdpq_array_enable) ?
-	    (ioc->reply_queue_count):1,
-	    sizeof(struct reply_post_struct), GFP_KERNEL);
-
-	if (!ioc->reply_post) {
-		printk(MPT2SAS_ERR_FMT "reply_post_free pool: kcalloc failed\n",
-			ioc->name);
-		goto out;
-	}
-	ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
-	    ioc->pdev, sz, 16, 0);
-	if (!ioc->reply_post_free_dma_pool) {
-		printk(MPT2SAS_ERR_FMT
-		 "reply_post_free pool: pci_pool_create failed\n",
-		 ioc->name);
-		goto out;
-	}
-	i = 0;
-	do {
-		ioc->reply_post[i].reply_post_free =
-		    pci_pool_alloc(ioc->reply_post_free_dma_pool,
-		    GFP_KERNEL,
-		    &ioc->reply_post[i].reply_post_free_dma);
-		if (!ioc->reply_post[i].reply_post_free) {
-			printk(MPT2SAS_ERR_FMT
-			"reply_post_free pool: pci_pool_alloc failed\n",
-			ioc->name);
-			goto out;
-		}
-		memset(ioc->reply_post[i].reply_post_free, 0, sz);
-		dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "reply post free pool (0x%p): depth(%d),"
-		    "element_size(%d), pool_size(%d kB)\n", ioc->name,
-		    ioc->reply_post[i].reply_post_free,
-		    ioc->reply_post_queue_depth, 8, sz/1024));
-		dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "reply_post_free_dma = (0x%llx)\n", ioc->name,
-		    (unsigned long long)
-		    ioc->reply_post[i].reply_post_free_dma));
-		total_sz += sz;
-	} while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
-
-	if (ioc->dma_mask == 64) {
-		if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
-			printk(MPT2SAS_WARN_FMT
-			    "no suitable consistent DMA mask for %s\n",
-			    ioc->name, pci_name(ioc->pdev));
-			goto out;
-		}
-	}
-
-	ioc->scsiio_depth = ioc->hba_queue_depth -
-	    ioc->hi_priority_depth - ioc->internal_depth;
-
-	/* set the scsi host can_queue depth
-	 * with some internal commands that could be outstanding
-	 */
-	ioc->shost->can_queue = ioc->scsiio_depth;
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
-	    "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
-
-	/* contiguous pool for request and chains, 16 byte align, one extra "
-	 * "frame for smid=0
-	 */
-	ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
-	sz = ((ioc->scsiio_depth + 1) * ioc->request_sz);
-
-	/* hi-priority queue */
-	sz += (ioc->hi_priority_depth * ioc->request_sz);
-
-	/* internal queue */
-	sz += (ioc->internal_depth * ioc->request_sz);
-
-	ioc->request_dma_sz = sz;
-	ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
-	if (!ioc->request) {
-		printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
-		    "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
-		    "total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
-		    ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
-		if (ioc->scsiio_depth < MPT2SAS_SAS_QUEUE_DEPTH)
-			goto out;
-		retry_sz += 64;
-		ioc->hba_queue_depth = max_request_credit - retry_sz;
-		goto retry_allocation;
-	}
-
-	if (retry_sz)
-		printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
-		    "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
-		    "total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
-		    ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
-
-
-	/* hi-priority queue */
-	ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
-	    ioc->request_sz);
-	ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
-	    ioc->request_sz);
-
-	/* internal queue */
-	ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
-	    ioc->request_sz);
-	ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
-	    ioc->request_sz);
-
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): "
-	    "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
-	    ioc->request, ioc->hba_queue_depth, ioc->request_sz,
-	    (ioc->hba_queue_depth * ioc->request_sz)/1024));
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool: dma(0x%llx)\n",
-	    ioc->name, (unsigned long long) ioc->request_dma));
-	total_sz += sz;
-
-	sz = ioc->scsiio_depth * sizeof(struct scsiio_tracker);
-	ioc->scsi_lookup_pages = get_order(sz);
-	ioc->scsi_lookup = (struct scsiio_tracker *)__get_free_pages(
-	    GFP_KERNEL, ioc->scsi_lookup_pages);
-	if (!ioc->scsi_lookup) {
-		printk(MPT2SAS_ERR_FMT "scsi_lookup: get_free_pages failed, "
-		    "sz(%d)\n", ioc->name, (int)sz);
-		goto out;
-	}
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsiio(0x%p): "
-	    "depth(%d)\n", ioc->name, ioc->request,
-	    ioc->scsiio_depth));
-
-	ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH);
-	sz = ioc->chain_depth * sizeof(struct chain_tracker);
-	ioc->chain_pages = get_order(sz);
-
-	ioc->chain_lookup = (struct chain_tracker *)__get_free_pages(
-	    GFP_KERNEL, ioc->chain_pages);
-	if (!ioc->chain_lookup) {
-		printk(MPT2SAS_ERR_FMT "chain_lookup: get_free_pages failed, "
-		    "sz(%d)\n", ioc->name, (int)sz);
-		goto out;
-	}
-	ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev,
-	    ioc->request_sz, 16, 0);
-	if (!ioc->chain_dma_pool) {
-		printk(MPT2SAS_ERR_FMT "chain_dma_pool: pci_pool_create "
-		    "failed\n", ioc->name);
-		goto out;
-	}
-	for (i = 0; i < ioc->chain_depth; i++) {
-		ioc->chain_lookup[i].chain_buffer = pci_pool_alloc(
-		    ioc->chain_dma_pool , GFP_KERNEL,
-		    &ioc->chain_lookup[i].chain_buffer_dma);
-		if (!ioc->chain_lookup[i].chain_buffer) {
-			ioc->chain_depth = i;
-			goto chain_done;
-		}
-		total_sz += ioc->request_sz;
-	}
-chain_done:
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool depth"
-	    "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
-	    ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth *
-	    ioc->request_sz))/1024));
-
-	/* initialize hi-priority queue smid's */
-	ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
-	    sizeof(struct request_tracker), GFP_KERNEL);
-	if (!ioc->hpr_lookup) {
-		printk(MPT2SAS_ERR_FMT "hpr_lookup: kcalloc failed\n",
-		    ioc->name);
-		goto out;
-	}
-	ioc->hi_priority_smid = ioc->scsiio_depth + 1;
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hi_priority(0x%p): "
-	    "depth(%d), start smid(%d)\n", ioc->name, ioc->hi_priority,
-	    ioc->hi_priority_depth, ioc->hi_priority_smid));
-
-	/* initialize internal queue smid's */
-	ioc->internal_lookup = kcalloc(ioc->internal_depth,
-	    sizeof(struct request_tracker), GFP_KERNEL);
-	if (!ioc->internal_lookup) {
-		printk(MPT2SAS_ERR_FMT "internal_lookup: kcalloc failed\n",
-		    ioc->name);
-		goto out;
-	}
-	ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "internal(0x%p): "
-	    "depth(%d), start smid(%d)\n", ioc->name, ioc->internal,
-	     ioc->internal_depth, ioc->internal_smid));
-
-	/* sense buffers, 4 byte align */
-	sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
-	ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
-	    0);
-	if (!ioc->sense_dma_pool) {
-		printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_create failed\n",
-		    ioc->name);
-		goto out;
-	}
-	ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL,
-	    &ioc->sense_dma);
-	if (!ioc->sense) {
-		printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_alloc failed\n",
-		    ioc->name);
-		goto out;
-	}
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
-	    "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
-	    "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
-	    SCSI_SENSE_BUFFERSIZE, sz/1024));
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_dma(0x%llx)\n",
-	    ioc->name, (unsigned long long)ioc->sense_dma));
-	total_sz += sz;
-
-	/* reply pool, 4 byte align */
-	sz = ioc->reply_free_queue_depth * ioc->reply_sz;
-	ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4,
-	    0);
-	if (!ioc->reply_dma_pool) {
-		printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_create failed\n",
-		    ioc->name);
-		goto out;
-	}
-	ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL,
-	    &ioc->reply_dma);
-	if (!ioc->reply) {
-		printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_alloc failed\n",
-		    ioc->name);
-		goto out;
-	}
-	ioc->reply_dma_min_address = (u32)(ioc->reply_dma);
-	ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz;
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply pool(0x%p): depth"
-	    "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->reply,
-	    ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024));
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_dma(0x%llx)\n",
-	    ioc->name, (unsigned long long)ioc->reply_dma));
-	total_sz += sz;
-
-	/* reply free queue, 16 byte align */
-	sz = ioc->reply_free_queue_depth * 4;
-	ioc->reply_free_dma_pool = pci_pool_create("reply_free pool",
-	    ioc->pdev, sz, 16, 0);
-	if (!ioc->reply_free_dma_pool) {
-		printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_create "
-		    "failed\n", ioc->name);
-		goto out;
-	}
-	ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL,
-	    &ioc->reply_free_dma);
-	if (!ioc->reply_free) {
-		printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_alloc "
-		    "failed\n", ioc->name);
-		goto out;
-	}
-	memset(ioc->reply_free, 0, sz);
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free pool(0x%p): "
-	    "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name,
-	    ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024));
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_dma"
-	    "(0x%llx)\n", ioc->name, (unsigned long long)ioc->reply_free_dma));
-	total_sz += sz;
-
-	ioc->config_page_sz = 512;
-	ioc->config_page = pci_alloc_consistent(ioc->pdev,
-	    ioc->config_page_sz, &ioc->config_page_dma);
-	if (!ioc->config_page) {
-		printk(MPT2SAS_ERR_FMT "config page: pci_pool_alloc "
-		    "failed\n", ioc->name);
-		goto out;
-	}
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config page(0x%p): size"
-	    "(%d)\n", ioc->name, ioc->config_page, ioc->config_page_sz));
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config_page_dma"
-	    "(0x%llx)\n", ioc->name, (unsigned long long)ioc->config_page_dma));
-	total_sz += ioc->config_page_sz;
-
-	printk(MPT2SAS_INFO_FMT "Allocated physical memory: size(%d kB)\n",
-	    ioc->name, total_sz/1024);
-	printk(MPT2SAS_INFO_FMT "Current Controller Queue Depth(%d), "
-	    "Max Controller Queue Depth(%d)\n",
-	    ioc->name, ioc->shost->can_queue, facts->RequestCredit);
-	printk(MPT2SAS_INFO_FMT "Scatter Gather Elements per IO(%d)\n",
-	    ioc->name, ioc->shost->sg_tablesize);
-	return 0;
-
- out:
-	return -ENOMEM;
-}
-
-
-/**
- * mpt2sas_base_get_iocstate - Get the current state of a MPT adapter.
- * @ioc: Pointer to MPT_ADAPTER structure
- * @cooked: Request raw or cooked IOC state
- *
- * Returns all IOC Doorbell register bits if cooked==0, else just the
- * Doorbell bits in MPI_IOC_STATE_MASK.
- */
-u32
-mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked)
-{
-	u32 s, sc;
-
-	s = readl(&ioc->chip->Doorbell);
-	sc = s & MPI2_IOC_STATE_MASK;
-	return cooked ? sc : s;
-}
-
-/**
- * _base_wait_on_iocstate - waiting on a particular ioc state
- * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_wait_on_iocstate(struct MPT2SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
-    int sleep_flag)
-{
-	u32 count, cntdn;
-	u32 current_state;
-
-	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
-	do {
-		current_state = mpt2sas_base_get_iocstate(ioc, 1);
-		if (current_state == ioc_state)
-			return 0;
-		if (count && current_state == MPI2_IOC_STATE_FAULT)
-			break;
-		if (sleep_flag == CAN_SLEEP)
-			msleep(1);
-		else
-			udelay(500);
-		count++;
-	} while (--cntdn);
-
-	return current_state;
-}
-
-/**
- * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
- * a write to the doorbell)
- * @ioc: per adapter object
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- *
- * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
- */
-static int
-_base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout,
-    int sleep_flag)
-{
-	u32 cntdn, count;
-	u32 int_status;
-
-	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
-	do {
-		int_status = readl(&ioc->chip->HostInterruptStatus);
-		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
-			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successful count(%d), timeout(%d)\n", ioc->name,
-			    __func__, count, timeout));
-			return 0;
-		}
-		if (sleep_flag == CAN_SLEEP)
-			msleep(1);
-		else
-			udelay(500);
-		count++;
-	} while (--cntdn);
-
-	printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
-	    "int_status(%x)!\n", ioc->name, __func__, count, int_status);
-	return -EFAULT;
-}
-
-/**
- * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
- * @ioc: per adapter object
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- *
- * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
- * doorbell.
- */
-static int
-_base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout,
-    int sleep_flag)
-{
-	u32 cntdn, count;
-	u32 int_status;
-	u32 doorbell;
-
-	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
-	do {
-		int_status = readl(&ioc->chip->HostInterruptStatus);
-		if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
-			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successful count(%d), timeout(%d)\n", ioc->name,
-			    __func__, count, timeout));
-			return 0;
-		} else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
-			doorbell = readl(&ioc->chip->Doorbell);
-			if ((doorbell & MPI2_IOC_STATE_MASK) ==
-			    MPI2_IOC_STATE_FAULT) {
-				mpt2sas_base_fault_info(ioc , doorbell);
-				return -EFAULT;
-			}
-		} else if (int_status == 0xFFFFFFFF)
-			goto out;
-
-		if (sleep_flag == CAN_SLEEP)
-			msleep(1);
-		else
-			udelay(500);
-		count++;
-	} while (--cntdn);
-
- out:
-	printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
-	    "int_status(%x)!\n", ioc->name, __func__, count, int_status);
-	return -EFAULT;
-}
-
-/**
- * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
- * @ioc: per adapter object
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- *
- */
-static int
-_base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout,
-    int sleep_flag)
-{
-	u32 cntdn, count;
-	u32 doorbell_reg;
-
-	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
-	do {
-		doorbell_reg = readl(&ioc->chip->Doorbell);
-		if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
-			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successful count(%d), timeout(%d)\n", ioc->name,
-			    __func__, count, timeout));
-			return 0;
-		}
-		if (sleep_flag == CAN_SLEEP)
-			msleep(1);
-		else
-			udelay(500);
-		count++;
-	} while (--cntdn);
-
-	printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
-	    "doorbell_reg(%x)!\n", ioc->name, __func__, count, doorbell_reg);
-	return -EFAULT;
-}
-
-/**
- * _base_send_ioc_reset - send doorbell reset
- * @ioc: per adapter object
- * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_send_ioc_reset(struct MPT2SAS_ADAPTER *ioc, u8 reset_type, int timeout,
-    int sleep_flag)
-{
-	u32 ioc_state;
-	int r = 0;
-
-	if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) {
-		printk(MPT2SAS_ERR_FMT "%s: unknown reset_type\n",
-		    ioc->name, __func__);
-		return -EFAULT;
-	}
-
-	if (!(ioc->facts.IOCCapabilities &
-	   MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY))
-		return -EFAULT;
-
-	printk(MPT2SAS_INFO_FMT "sending message unit reset !!\n", ioc->name);
-
-	writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
-	    &ioc->chip->Doorbell);
-	if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) {
-		r = -EFAULT;
-		goto out;
-	}
-	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
-	    timeout, sleep_flag);
-	if (ioc_state) {
-		printk(MPT2SAS_ERR_FMT "%s: failed going to ready state "
-		    " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
-		r = -EFAULT;
-		goto out;
-	}
- out:
-	printk(MPT2SAS_INFO_FMT "message unit reset: %s\n",
-	    ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
-	return r;
-}
-
-/**
- * _base_handshake_req_reply_wait - send request thru doorbell interface
- * @ioc: per adapter object
- * @request_bytes: request length
- * @request: pointer having request payload
- * @reply_bytes: reply length
- * @reply: pointer to reply payload
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes,
-    u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
-{
-	MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
-	int i;
-	u8 failed;
-	u16 dummy;
-	__le32 *mfp;
-
-	/* make sure doorbell is not in use */
-	if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
-		printk(MPT2SAS_ERR_FMT "doorbell is in use "
-		    " (line=%d)\n", ioc->name, __LINE__);
-		return -EFAULT;
-	}
-
-	/* clear pending doorbell interrupts from previous state changes */
-	if (readl(&ioc->chip->HostInterruptStatus) &
-	    MPI2_HIS_IOC2SYS_DB_STATUS)
-		writel(0, &ioc->chip->HostInterruptStatus);
-
-	/* send message to ioc */
-	writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
-	    ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
-	    &ioc->chip->Doorbell);
-
-	if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
-		printk(MPT2SAS_ERR_FMT "doorbell handshake "
-		   "int failed (line=%d)\n", ioc->name, __LINE__);
-		return -EFAULT;
-	}
-	writel(0, &ioc->chip->HostInterruptStatus);
-
-	if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
-		printk(MPT2SAS_ERR_FMT "doorbell handshake "
-		    "ack failed (line=%d)\n", ioc->name, __LINE__);
-		return -EFAULT;
-	}
-
-	/* send message 32-bits at a time */
-	for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
-		writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
-		if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
-			failed = 1;
-	}
-
-	if (failed) {
-		printk(MPT2SAS_ERR_FMT "doorbell handshake "
-		    "sending request failed (line=%d)\n", ioc->name, __LINE__);
-		return -EFAULT;
-	}
-
-	/* now wait for the reply */
-	if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
-		printk(MPT2SAS_ERR_FMT "doorbell handshake "
-		   "int failed (line=%d)\n", ioc->name, __LINE__);
-		return -EFAULT;
-	}
-
-	/* read the first two 16-bits, it gives the total length of the reply */
-	reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
-	    & MPI2_DOORBELL_DATA_MASK);
-	writel(0, &ioc->chip->HostInterruptStatus);
-	if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
-		printk(MPT2SAS_ERR_FMT "doorbell handshake "
-		   "int failed (line=%d)\n", ioc->name, __LINE__);
-		return -EFAULT;
-	}
-	reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
-	    & MPI2_DOORBELL_DATA_MASK);
-	writel(0, &ioc->chip->HostInterruptStatus);
-
-	for (i = 2; i < default_reply->MsgLength * 2; i++)  {
-		if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
-			printk(MPT2SAS_ERR_FMT "doorbell "
-			    "handshake int failed (line=%d)\n", ioc->name,
-			    __LINE__);
-			return -EFAULT;
-		}
-		if (i >=  reply_bytes/2) /* overflow case */
-			dummy = readl(&ioc->chip->Doorbell);
-		else
-			reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
-			    & MPI2_DOORBELL_DATA_MASK);
-		writel(0, &ioc->chip->HostInterruptStatus);
-	}
-
-	_base_wait_for_doorbell_int(ioc, 5, sleep_flag);
-	if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
-		dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "doorbell is in use "
-		    " (line=%d)\n", ioc->name, __LINE__));
-	}
-	writel(0, &ioc->chip->HostInterruptStatus);
-
-	if (ioc->logging_level & MPT_DEBUG_INIT) {
-		mfp = (__le32 *)reply;
-		printk(KERN_INFO "\toffset:data\n");
-		for (i = 0; i < reply_bytes/4; i++)
-			printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
-			    le32_to_cpu(mfp[i]));
-	}
-	return 0;
-}
-
-/**
- * mpt2sas_base_sas_iounit_control - send sas iounit control to FW
- * @ioc: per adapter object
- * @mpi_reply: the reply payload from FW
- * @mpi_request: the request payload sent to FW
- *
- * The SAS IO Unit Control Request message allows the host to perform low-level
- * operations, such as resets on the PHYs of the IO Unit, also allows the host
- * to obtain the IOC assigned device handles for a device if it has other
- * identifying information about the device, in addition allows the host to
- * remove IOC resources associated with the device.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2SasIoUnitControlReply_t *mpi_reply,
-    Mpi2SasIoUnitControlRequest_t *mpi_request)
-{
-	u16 smid;
-	u32 ioc_state;
-	unsigned long timeleft;
-	bool issue_reset = false;
-	int rc;
-	void *request;
-	u16 wait_state_count;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	mutex_lock(&ioc->base_cmds.mutex);
-
-	if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	wait_state_count = 0;
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			printk(MPT2SAS_ERR_FMT
-			    "%s: failed due to ioc not operational\n",
-			    ioc->name, __func__);
-			rc = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-		printk(MPT2SAS_INFO_FMT "%s: waiting for "
-		    "operational state(count=%d)\n", ioc->name,
-		    __func__, wait_state_count);
-	}
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	rc = 0;
-	ioc->base_cmds.status = MPT2_CMD_PENDING;
-	request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->base_cmds.smid = smid;
-	memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t));
-	if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
-	    mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
-		ioc->ioc_link_reset_in_progress = 1;
-	init_completion(&ioc->base_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
-	    msecs_to_jiffies(10000));
-	if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
-	    mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
-	    ioc->ioc_link_reset_in_progress)
-		ioc->ioc_link_reset_in_progress = 0;
-	if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
-		    ioc->name, __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2SasIoUnitControlRequest_t)/4);
-		if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
-			issue_reset = true;
-		goto issue_host_reset;
-	}
-	if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
-		memcpy(mpi_reply, ioc->base_cmds.reply,
-		    sizeof(Mpi2SasIoUnitControlReply_t));
-	else
-		memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t));
-	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-	goto out;
-
- issue_host_reset:
-	if (issue_reset)
-		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-	rc = -EFAULT;
- out:
-	mutex_unlock(&ioc->base_cmds.mutex);
-	return rc;
-}
-
-
-/**
- * mpt2sas_base_scsi_enclosure_processor - sending request to sep device
- * @ioc: per adapter object
- * @mpi_reply: the reply payload from FW
- * @mpi_request: the request payload sent to FW
- *
- * The SCSI Enclosure Processor request message causes the IOC to
- * communicate with SES devices to control LED status signals.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
-{
-	u16 smid;
-	u32 ioc_state;
-	unsigned long timeleft;
-	bool issue_reset = false;
-	int rc;
-	void *request;
-	u16 wait_state_count;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	mutex_lock(&ioc->base_cmds.mutex);
-
-	if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	wait_state_count = 0;
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			printk(MPT2SAS_ERR_FMT
-			    "%s: failed due to ioc not operational\n",
-			    ioc->name, __func__);
-			rc = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-		printk(MPT2SAS_INFO_FMT "%s: waiting for "
-		    "operational state(count=%d)\n", ioc->name,
-		    __func__, wait_state_count);
-	}
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	rc = 0;
-	ioc->base_cmds.status = MPT2_CMD_PENDING;
-	request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->base_cmds.smid = smid;
-	memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
-	init_completion(&ioc->base_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
-	    msecs_to_jiffies(10000));
-	if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
-		    ioc->name, __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2SepRequest_t)/4);
-		if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
-			issue_reset = true;
-		goto issue_host_reset;
-	}
-	if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
-		memcpy(mpi_reply, ioc->base_cmds.reply,
-		    sizeof(Mpi2SepReply_t));
-	else
-		memset(mpi_reply, 0, sizeof(Mpi2SepReply_t));
-	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-	goto out;
-
- issue_host_reset:
-	if (issue_reset)
-		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-	rc = -EFAULT;
- out:
-	mutex_unlock(&ioc->base_cmds.mutex);
-	return rc;
-}
-
-/**
- * _base_get_port_facts - obtain port facts reply and save in ioc
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag)
-{
-	Mpi2PortFactsRequest_t mpi_request;
-	Mpi2PortFactsReply_t mpi_reply;
-	struct mpt2sas_port_facts *pfacts;
-	int mpi_reply_sz, mpi_request_sz, r;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
-	mpi_request_sz = sizeof(Mpi2PortFactsRequest_t);
-	memset(&mpi_request, 0, mpi_request_sz);
-	mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
-	mpi_request.PortNumber = port;
-	r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
-	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
-
-	if (r != 0) {
-		printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
-		    ioc->name, __func__, r);
-		return r;
-	}
-
-	pfacts = &ioc->pfacts[port];
-	memset(pfacts, 0, sizeof(struct mpt2sas_port_facts));
-	pfacts->PortNumber = mpi_reply.PortNumber;
-	pfacts->VP_ID = mpi_reply.VP_ID;
-	pfacts->VF_ID = mpi_reply.VF_ID;
-	pfacts->MaxPostedCmdBuffers =
-	    le16_to_cpu(mpi_reply.MaxPostedCmdBuffers);
-
-	return 0;
-}
-
-/**
- * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
- * @ioc: per adapter object
- * @timeout:
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_wait_for_iocstate(struct MPT2SAS_ADAPTER *ioc, int timeout,
-	int sleep_flag)
-{
-	u32 ioc_state, doorbell;
-	int rc;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	if (ioc->pci_error_recovery)
-		return 0;
-
-	doorbell = mpt2sas_base_get_iocstate(ioc, 0);
-	ioc_state = doorbell & MPI2_IOC_STATE_MASK;
-	dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: ioc_state(0x%08x)\n",
-	    ioc->name, __func__, ioc_state));
-
-	switch (ioc_state) {
-	case MPI2_IOC_STATE_READY:
-	case MPI2_IOC_STATE_OPERATIONAL:
-		return 0;
-	}
-
-	if (doorbell & MPI2_DOORBELL_USED) {
-		dhsprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "unexpected doorbell activ!e\n", ioc->name));
-		goto issue_diag_reset;
-	}
-
-	if (ioc_state == MPI2_IOC_STATE_FAULT) {
-		mpt2sas_base_fault_info(ioc, doorbell &
-		    MPI2_DOORBELL_DATA_MASK);
-		goto issue_diag_reset;
-	}
-
-	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
-	    timeout, sleep_flag);
-	if (ioc_state) {
-		printk(MPT2SAS_ERR_FMT
-		    "%s: failed going to ready state (ioc_state=0x%x)\n",
-		    ioc->name, __func__, ioc_state);
-		return -EFAULT;
-	}
-
- issue_diag_reset:
-	rc = _base_diag_reset(ioc, sleep_flag);
-	return rc;
-}
-
-/**
- * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
-	Mpi2IOCFactsRequest_t mpi_request;
-	Mpi2IOCFactsReply_t mpi_reply;
-	struct mpt2sas_facts *facts;
-	int mpi_reply_sz, mpi_request_sz, r;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	r = _base_wait_for_iocstate(ioc, 10, sleep_flag);
-	if (r) {
-		printk(MPT2SAS_ERR_FMT "%s: failed getting to correct state\n",
-			ioc->name, __func__);
-		return r;
-	}
-
-	mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
-	mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
-	memset(&mpi_request, 0, mpi_request_sz);
-	mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
-	r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
-	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
-
-	if (r != 0) {
-		printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
-		    ioc->name, __func__, r);
-		return r;
-	}
-
-	facts = &ioc->facts;
-	memset(facts, 0, sizeof(struct mpt2sas_facts));
-	facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
-	facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
-	facts->VP_ID = mpi_reply.VP_ID;
-	facts->VF_ID = mpi_reply.VF_ID;
-	facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
-	facts->MaxChainDepth = mpi_reply.MaxChainDepth;
-	facts->WhoInit = mpi_reply.WhoInit;
-	facts->NumberOfPorts = mpi_reply.NumberOfPorts;
-	facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
-	facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
-	facts->MaxReplyDescriptorPostQueueDepth =
-	    le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
-	facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
-	facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
-	if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
-		ioc->ir_firmware = 1;
-	if ((facts->IOCCapabilities &
-	      MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE))
-		ioc->rdpq_array_capable = 1;
-	facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
-	facts->IOCRequestFrameSize =
-	    le16_to_cpu(mpi_reply.IOCRequestFrameSize);
-	facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
-	facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
-	ioc->shost->max_id = -1;
-	facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
-	facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
-	facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
-	facts->HighPriorityCredit =
-	    le16_to_cpu(mpi_reply.HighPriorityCredit);
-	facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
-	facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hba queue depth(%d), "
-	    "max chains per io(%d)\n", ioc->name, facts->RequestCredit,
-	    facts->MaxChainDepth));
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request frame size(%d), "
-	    "reply frame size(%d)\n", ioc->name,
-	    facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
-	return 0;
-}
-
-/**
- * _base_send_ioc_init - send ioc_init to firmware
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
-	Mpi2IOCInitRequest_t mpi_request;
-	Mpi2IOCInitReply_t mpi_reply;
-	int i, r = 0;
-	struct timeval current_time;
-	u16 ioc_status;
-	u32 reply_post_free_array_sz = 0;
-	Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL;
-	dma_addr_t reply_post_free_array_dma;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
-	mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
-	mpi_request.VF_ID = 0; /* TODO */
-	mpi_request.VP_ID = 0;
-	mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
-	mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
-
-	if (_base_is_controller_msix_enabled(ioc))
-		mpi_request.HostMSIxVectors = ioc->reply_queue_count;
-	mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
-	mpi_request.ReplyDescriptorPostQueueDepth =
-	    cpu_to_le16(ioc->reply_post_queue_depth);
-	mpi_request.ReplyFreeQueueDepth =
-	    cpu_to_le16(ioc->reply_free_queue_depth);
-
-	mpi_request.SenseBufferAddressHigh =
-	    cpu_to_le32((u64)ioc->sense_dma >> 32);
-	mpi_request.SystemReplyAddressHigh =
-	    cpu_to_le32((u64)ioc->reply_dma >> 32);
-	mpi_request.SystemRequestFrameBaseAddress =
-	    cpu_to_le64((u64)ioc->request_dma);
-	mpi_request.ReplyFreeQueueAddress =
-	    cpu_to_le64((u64)ioc->reply_free_dma);
-
-	if (ioc->rdpq_array_enable) {
-		reply_post_free_array_sz = ioc->reply_queue_count *
-		    sizeof(Mpi2IOCInitRDPQArrayEntry);
-		reply_post_free_array = pci_alloc_consistent(ioc->pdev,
-			reply_post_free_array_sz, &reply_post_free_array_dma);
-		if (!reply_post_free_array) {
-			printk(MPT2SAS_ERR_FMT
-			"reply_post_free_array: pci_alloc_consistent failed\n",
-			ioc->name);
-			r = -ENOMEM;
-			goto out;
-		}
-		memset(reply_post_free_array, 0, reply_post_free_array_sz);
-		for (i = 0; i < ioc->reply_queue_count; i++)
-			reply_post_free_array[i].RDPQBaseAddress =
-			    cpu_to_le64(
-				(u64)ioc->reply_post[i].reply_post_free_dma);
-		mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE;
-		mpi_request.ReplyDescriptorPostQueueAddress =
-		    cpu_to_le64((u64)reply_post_free_array_dma);
-	} else {
-		mpi_request.ReplyDescriptorPostQueueAddress =
-		    cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma);
-	}
-
-	/* This time stamp specifies number of milliseconds
-	 * since epoch ~ midnight January 1, 1970.
-	 */
-	do_gettimeofday(&current_time);
-	mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 +
-	    (current_time.tv_usec / 1000));
-
-	if (ioc->logging_level & MPT_DEBUG_INIT) {
-		__le32 *mfp;
-		int i;
-
-		mfp = (__le32 *)&mpi_request;
-		printk(KERN_INFO "\toffset:data\n");
-		for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
-			printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
-			    le32_to_cpu(mfp[i]));
-	}
-
-	r = _base_handshake_req_reply_wait(ioc,
-	    sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
-	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10,
-	    sleep_flag);
-
-	if (r != 0) {
-		printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
-		    ioc->name, __func__, r);
-		goto out;
-	}
-
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS ||
-	    mpi_reply.IOCLogInfo) {
-		printk(MPT2SAS_ERR_FMT "%s: failed\n", ioc->name, __func__);
-		r = -EIO;
-	}
-
-out:
-	if (reply_post_free_array)
-		pci_free_consistent(ioc->pdev, reply_post_free_array_sz,
-				    reply_post_free_array,
-				    reply_post_free_array_dma);
-	return r;
-}
-
-/**
- * mpt2sas_port_enable_done - command completion routine for port enable
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-u8
-mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-	u32 reply)
-{
-	MPI2DefaultReply_t *mpi_reply;
-	u16 ioc_status;
-
-	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
-		return 1;
-
-	if (ioc->port_enable_cmds.status == MPT2_CMD_NOT_USED)
-		return 1;
-
-	ioc->port_enable_cmds.status |= MPT2_CMD_COMPLETE;
-	if (mpi_reply) {
-		ioc->port_enable_cmds.status |= MPT2_CMD_REPLY_VALID;
-		memcpy(ioc->port_enable_cmds.reply, mpi_reply,
-		    mpi_reply->MsgLength*4);
-	}
-	ioc->port_enable_cmds.status &= ~MPT2_CMD_PENDING;
-
-	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
-		ioc->port_enable_failed = 1;
-
-	if (ioc->is_driver_loading) {
-		if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
-			mpt2sas_port_enable_complete(ioc);
-			return 1;
-		} else {
-			ioc->start_scan_failed = ioc_status;
-			ioc->start_scan = 0;
-			return 1;
-		}
-	}
-	complete(&ioc->port_enable_cmds.done);
-	return 1;
-}
-
-
-/**
- * _base_send_port_enable - send port_enable(discovery stuff) to firmware
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
-	Mpi2PortEnableRequest_t *mpi_request;
-	Mpi2PortEnableReply_t *mpi_reply;
-	unsigned long timeleft;
-	int r = 0;
-	u16 smid;
-	u16 ioc_status;
-
-	printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
-
-	if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
-		printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
-		    ioc->name, __func__);
-		return -EAGAIN;
-	}
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		return -EAGAIN;
-	}
-
-	ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->port_enable_cmds.smid = smid;
-	memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
-	mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
-
-	init_completion(&ioc->port_enable_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
-	    300*HZ);
-	if (!(ioc->port_enable_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
-		    ioc->name, __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2PortEnableRequest_t)/4);
-		if (ioc->port_enable_cmds.status & MPT2_CMD_RESET)
-			r = -EFAULT;
-		else
-			r = -ETIME;
-		goto out;
-	}
-	mpi_reply = ioc->port_enable_cmds.reply;
-
-	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "%s: failed with (ioc_status=0x%08x)\n",
-		    ioc->name, __func__, ioc_status);
-		r = -EFAULT;
-		goto out;
-	}
- out:
-	ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
-	printk(MPT2SAS_INFO_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
-	    "SUCCESS" : "FAILED"));
-	return r;
-}
-
-/**
- * mpt2sas_port_enable - initiate firmware discovery (don't wait for reply)
- * @ioc: per adapter object
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc)
-{
-	Mpi2PortEnableRequest_t *mpi_request;
-	u16 smid;
-
-	printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
-
-	if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
-		printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
-		    ioc->name, __func__);
-		return -EAGAIN;
-	}
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		return -EAGAIN;
-	}
-
-	ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->port_enable_cmds.smid = smid;
-	memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
-	mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
-
-	mpt2sas_base_put_smid_default(ioc, smid);
-	return 0;
-}
-
-/**
- * _base_determine_wait_on_discovery - desposition
- * @ioc: per adapter object
- *
- * Decide whether to wait on discovery to complete. Used to either
- * locate boot device, or report volumes ahead of physical devices.
- *
- * Returns 1 for wait, 0 for don't wait
- */
-static int
-_base_determine_wait_on_discovery(struct MPT2SAS_ADAPTER *ioc)
-{
-	/* We wait for discovery to complete if IR firmware is loaded.
-	 * The sas topology events arrive before PD events, so we need time to
-	 * turn on the bit in ioc->pd_handles to indicate PD
-	 * Also, it maybe required to report Volumes ahead of physical
-	 * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
-	 */
-	if (ioc->ir_firmware)
-		return 1;
-
-	/* if no Bios, then we don't need to wait */
-	if (!ioc->bios_pg3.BiosVersion)
-		return 0;
-
-	/* Bios is present, then we drop down here.
-	 *
-	 * If there any entries in the Bios Page 2, then we wait
-	 * for discovery to complete.
-	 */
-
-	/* Current Boot Device */
-	if ((ioc->bios_pg2.CurrentBootDeviceForm &
-	    MPI2_BIOSPAGE2_FORM_MASK) ==
-	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
-	/* Request Boot Device */
-	   (ioc->bios_pg2.ReqBootDeviceForm &
-	    MPI2_BIOSPAGE2_FORM_MASK) ==
-	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
-	/* Alternate Request Boot Device */
-	   (ioc->bios_pg2.ReqAltBootDeviceForm &
-	    MPI2_BIOSPAGE2_FORM_MASK) ==
-	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
-		return 0;
-
-	return 1;
-}
-
-
-/**
- * _base_unmask_events - turn on notification for this event
- * @ioc: per adapter object
- * @event: firmware event
- *
- * The mask is stored in ioc->event_masks.
- */
-static void
-_base_unmask_events(struct MPT2SAS_ADAPTER *ioc, u16 event)
-{
-	u32 desired_event;
-
-	if (event >= 128)
-		return;
-
-	desired_event = (1 << (event % 32));
-
-	if (event < 32)
-		ioc->event_masks[0] &= ~desired_event;
-	else if (event < 64)
-		ioc->event_masks[1] &= ~desired_event;
-	else if (event < 96)
-		ioc->event_masks[2] &= ~desired_event;
-	else if (event < 128)
-		ioc->event_masks[3] &= ~desired_event;
-}
-
-/**
- * _base_event_notification - send event notification
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
-	Mpi2EventNotificationRequest_t *mpi_request;
-	unsigned long timeleft;
-	u16 smid;
-	int r = 0;
-	int i;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
-		printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
-		    ioc->name, __func__);
-		return -EAGAIN;
-	}
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		return -EAGAIN;
-	}
-	ioc->base_cmds.status = MPT2_CMD_PENDING;
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->base_cmds.smid = smid;
-	memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
-	mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
-	mpi_request->VF_ID = 0; /* TODO */
-	mpi_request->VP_ID = 0;
-	for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
-		mpi_request->EventMasks[i] =
-		    cpu_to_le32(ioc->event_masks[i]);
-	init_completion(&ioc->base_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
-	if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
-		    ioc->name, __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2EventNotificationRequest_t)/4);
-		if (ioc->base_cmds.status & MPT2_CMD_RESET)
-			r = -EFAULT;
-		else
-			r = -ETIME;
-	} else
-		dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
-		    ioc->name, __func__));
-	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-	return r;
-}
-
-/**
- * mpt2sas_base_validate_event_type - validating event types
- * @ioc: per adapter object
- * @event: firmware event
- *
- * This will turn on firmware event notification when application
- * ask for that event. We don't mask events that are already enabled.
- */
-void
-mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type)
-{
-	int i, j;
-	u32 event_mask, desired_event;
-	u8 send_update_to_fw;
-
-	for (i = 0, send_update_to_fw = 0; i <
-	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) {
-		event_mask = ~event_type[i];
-		desired_event = 1;
-		for (j = 0; j < 32; j++) {
-			if (!(event_mask & desired_event) &&
-			    (ioc->event_masks[i] & desired_event)) {
-				ioc->event_masks[i] &= ~desired_event;
-				send_update_to_fw = 1;
-			}
-			desired_event = (desired_event << 1);
-		}
-	}
-
-	if (!send_update_to_fw)
-		return;
-
-	mutex_lock(&ioc->base_cmds.mutex);
-	_base_event_notification(ioc, CAN_SLEEP);
-	mutex_unlock(&ioc->base_cmds.mutex);
-}
-
-/**
- * _base_diag_reset - the "big hammer" start of day reset
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
-	u32 host_diagnostic;
-	u32 ioc_state;
-	u32 count;
-	u32 hcb_size;
-
-	printk(MPT2SAS_INFO_FMT "sending diag reset !!\n", ioc->name);
-	drsprintk(ioc, printk(MPT2SAS_INFO_FMT "clear interrupts\n",
-	    ioc->name));
-
-	count = 0;
-	do {
-		/* Write magic sequence to WriteSequence register
-		 * Loop until in diagnostic mode
-		 */
-		drsprintk(ioc, printk(MPT2SAS_INFO_FMT "write magic "
-		    "sequence\n", ioc->name));
-		writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
-		writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
-		writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence);
-		writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence);
-		writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence);
-		writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence);
-		writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
-
-		/* wait 100 msec */
-		if (sleep_flag == CAN_SLEEP)
-			msleep(100);
-		else
-			mdelay(100);
-
-		if (count++ > 20)
-			goto out;
-
-		host_diagnostic = readl(&ioc->chip->HostDiagnostic);
-		drsprintk(ioc, printk(MPT2SAS_INFO_FMT "wrote magic "
-		    "sequence: count(%d), host_diagnostic(0x%08x)\n",
-		    ioc->name, count, host_diagnostic));
-
-	} while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
-
-	hcb_size = readl(&ioc->chip->HCBSize);
-
-	drsprintk(ioc, printk(MPT2SAS_INFO_FMT "diag reset: issued\n",
-	    ioc->name));
-	writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
-	     &ioc->chip->HostDiagnostic);
-
-	/* This delay allows the chip PCIe hardware time to finish reset tasks*/
-	if (sleep_flag == CAN_SLEEP)
-		msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
-	else
-		mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
-
-	/* Approximately 300 second max wait */
-	for (count = 0; count < (300000000 /
-	    MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
-
-		host_diagnostic = readl(&ioc->chip->HostDiagnostic);
-
-		if (host_diagnostic == 0xFFFFFFFF)
-			goto out;
-		if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
-			break;
-
-		/* Wait to pass the second read delay window */
-		if (sleep_flag == CAN_SLEEP)
-			msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
-			       /1000);
-		else
-			mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
-			       /1000);
-	}
-
-	if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
-
-		drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter "
-		    "assuming the HCB Address points to good F/W\n",
-		    ioc->name));
-		host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
-		host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
-		writel(host_diagnostic, &ioc->chip->HostDiagnostic);
-
-		drsprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "re-enable the HCDW\n", ioc->name));
-		writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
-		    &ioc->chip->HCBSize);
-	}
-
-	drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter\n",
-	    ioc->name));
-	writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
-	    &ioc->chip->HostDiagnostic);
-
-	drsprintk(ioc, printk(MPT2SAS_INFO_FMT "disable writes to the "
-	    "diagnostic register\n", ioc->name));
-	writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
-
-	drsprintk(ioc, printk(MPT2SAS_INFO_FMT "Wait for FW to go to the "
-	    "READY state\n", ioc->name));
-	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
-	    sleep_flag);
-	if (ioc_state) {
-		printk(MPT2SAS_ERR_FMT "%s: failed going to ready state "
-		    " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
-		goto out;
-	}
-
-	printk(MPT2SAS_INFO_FMT "diag reset: SUCCESS\n", ioc->name);
-	return 0;
-
- out:
-	printk(MPT2SAS_ERR_FMT "diag reset: FAILED\n", ioc->name);
-	return -EFAULT;
-}
-
-/**
- * _base_make_ioc_ready - put controller in READY state
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- * @type: FORCE_BIG_HAMMER or SOFT_RESET
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
-    enum reset_type type)
-{
-	u32 ioc_state;
-	int rc;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	if (ioc->pci_error_recovery)
-		return 0;
-
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
-	dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: ioc_state(0x%08x)\n",
-	    ioc->name, __func__, ioc_state));
-
-	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
-		return 0;
-
-	if (ioc_state & MPI2_DOORBELL_USED) {
-		dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell "
-		    "active!\n", ioc->name));
-		goto issue_diag_reset;
-	}
-
-	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
-		mpt2sas_base_fault_info(ioc, ioc_state &
-		    MPI2_DOORBELL_DATA_MASK);
-		goto issue_diag_reset;
-	}
-
-	if (type == FORCE_BIG_HAMMER)
-		goto issue_diag_reset;
-
-	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
-		if (!(_base_send_ioc_reset(ioc,
-		    MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) {
-			ioc->ioc_reset_count++;
-			return 0;
-	}
-
- issue_diag_reset:
-	rc = _base_diag_reset(ioc, CAN_SLEEP);
-	ioc->ioc_reset_count++;
-	return rc;
-}
-
-/**
- * _base_make_ioc_operational - put controller in OPERATIONAL state
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
-	int r, i;
-	unsigned long	flags;
-	u32 reply_address;
-	u16 smid;
-	struct _tr_list *delayed_tr, *delayed_tr_next;
-	u8 hide_flag;
-	struct adapter_reply_queue *reply_q;
-	long reply_post_free;
-	u32 reply_post_free_sz, index = 0;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	/* clean the delayed target reset list */
-	list_for_each_entry_safe(delayed_tr, delayed_tr_next,
-	    &ioc->delayed_tr_list, list) {
-		list_del(&delayed_tr->list);
-		kfree(delayed_tr);
-	}
-
-	list_for_each_entry_safe(delayed_tr, delayed_tr_next,
-	    &ioc->delayed_tr_volume_list, list) {
-		list_del(&delayed_tr->list);
-		kfree(delayed_tr);
-	}
-
-	/* initialize the scsi lookup free list */
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	INIT_LIST_HEAD(&ioc->free_list);
-	smid = 1;
-	for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
-		INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list);
-		ioc->scsi_lookup[i].cb_idx = 0xFF;
-		ioc->scsi_lookup[i].smid = smid;
-		ioc->scsi_lookup[i].scmd = NULL;
-		ioc->scsi_lookup[i].direct_io = 0;
-		list_add_tail(&ioc->scsi_lookup[i].tracker_list,
-		    &ioc->free_list);
-	}
-
-	/* hi-priority queue */
-	INIT_LIST_HEAD(&ioc->hpr_free_list);
-	smid = ioc->hi_priority_smid;
-	for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
-		ioc->hpr_lookup[i].cb_idx = 0xFF;
-		ioc->hpr_lookup[i].smid = smid;
-		list_add_tail(&ioc->hpr_lookup[i].tracker_list,
-		    &ioc->hpr_free_list);
-	}
-
-	/* internal queue */
-	INIT_LIST_HEAD(&ioc->internal_free_list);
-	smid = ioc->internal_smid;
-	for (i = 0; i < ioc->internal_depth; i++, smid++) {
-		ioc->internal_lookup[i].cb_idx = 0xFF;
-		ioc->internal_lookup[i].smid = smid;
-		list_add_tail(&ioc->internal_lookup[i].tracker_list,
-		    &ioc->internal_free_list);
-	}
-
-	/* chain pool */
-	INIT_LIST_HEAD(&ioc->free_chain_list);
-	for (i = 0; i < ioc->chain_depth; i++)
-		list_add_tail(&ioc->chain_lookup[i].tracker_list,
-		    &ioc->free_chain_list);
-
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-
-	/* initialize Reply Free Queue */
-	for (i = 0, reply_address = (u32)ioc->reply_dma ;
-	    i < ioc->reply_free_queue_depth ; i++, reply_address +=
-	    ioc->reply_sz)
-		ioc->reply_free[i] = cpu_to_le32(reply_address);
-
-	/* initialize reply queues */
-	if (ioc->is_driver_loading)
-		_base_assign_reply_queues(ioc);
-
-	/* initialize Reply Post Free Queue */
-	reply_post_free_sz = ioc->reply_post_queue_depth *
-	    sizeof(Mpi2DefaultReplyDescriptor_t);
-	reply_post_free = (long)ioc->reply_post[index].reply_post_free;
-	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
-		reply_q->reply_post_host_index = 0;
-		reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
-		    reply_post_free;
-		for (i = 0; i < ioc->reply_post_queue_depth; i++)
-			reply_q->reply_post_free[i].Words =
-						     cpu_to_le64(ULLONG_MAX);
-		if (!_base_is_controller_msix_enabled(ioc))
-			goto skip_init_reply_post_free_queue;
-		/*
-		 * If RDPQ is enabled, switch to the next allocation.
-		 * Otherwise advance within the contiguous region.
-		 */
-		if (ioc->rdpq_array_enable)
-			reply_post_free = (long)
-			    ioc->reply_post[++index].reply_post_free;
-		else
-			reply_post_free += reply_post_free_sz;
-	}
- skip_init_reply_post_free_queue:
-
-	r = _base_send_ioc_init(ioc, sleep_flag);
-	if (r)
-		return r;
-
-	/* initialize reply free host index */
-	ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
-	writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);
-
-	/* initialize reply post host index */
-	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
-		writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT,
-		    &ioc->chip->ReplyPostHostIndex);
-		if (!_base_is_controller_msix_enabled(ioc))
-			goto skip_init_reply_post_host_index;
-	}
-
- skip_init_reply_post_host_index:
-
-	_base_unmask_interrupts(ioc);
-
-	r = _base_event_notification(ioc, sleep_flag);
-	if (r)
-		return r;
-
-	if (sleep_flag == CAN_SLEEP)
-		_base_static_config_pages(ioc);
-
-
-	if (ioc->is_driver_loading) {
-		if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier
-		    == 0x80) {
-			hide_flag = (u8) (
-			    le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) &
-			    MFG_PAGE10_HIDE_SSDS_MASK);
-			if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
-				ioc->mfg_pg10_hide_flag = hide_flag;
-		}
-		ioc->wait_for_discovery_to_complete =
-		    _base_determine_wait_on_discovery(ioc);
-		return r; /* scan_start and scan_finished support */
-	}
-	r = _base_send_port_enable(ioc, sleep_flag);
-	if (r)
-		return r;
-
-	return r;
-}
-
-/**
- * mpt2sas_base_free_resources - free resources controller resources (io/irq/memap)
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-void
-mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct pci_dev *pdev = ioc->pdev;
-
-	dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	/* synchronizing freeing resource with pci_access_mutex lock */
-	mutex_lock(&ioc->pci_access_mutex);
-	if (ioc->chip_phys && ioc->chip) {
-		_base_mask_interrupts(ioc);
-		ioc->shost_recovery = 1;
-		_base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
-		ioc->shost_recovery = 0;
-	}
-
-	_base_free_irq(ioc);
-	_base_disable_msix(ioc);
-
-	if (ioc->chip_phys && ioc->chip)
-		iounmap(ioc->chip);
-	ioc->chip_phys = 0;
-
-	if (pci_is_enabled(pdev)) {
-		pci_release_selected_regions(ioc->pdev, ioc->bars);
-		pci_disable_pcie_error_reporting(pdev);
-		pci_disable_device(pdev);
-	}
-	mutex_unlock(&ioc->pci_access_mutex);
-	return;
-}
-
-/**
- * mpt2sas_base_attach - attach controller instance
- * @ioc: per adapter object
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
-{
-	int r, i;
-	int cpu_id, last_cpu_id = 0;
-
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	/* setup cpu_msix_table */
-	ioc->cpu_count = num_online_cpus();
-	for_each_online_cpu(cpu_id)
-		last_cpu_id = cpu_id;
-	ioc->cpu_msix_table_sz = last_cpu_id + 1;
-	ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL);
-	ioc->reply_queue_count = 1;
-	if (!ioc->cpu_msix_table) {
-		dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for "
-		    "cpu_msix_table failed!!!\n", ioc->name));
-		r = -ENOMEM;
-		goto out_free_resources;
-	}
-
-	if (ioc->is_warpdrive) {
-		ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz,
-		    sizeof(resource_size_t *), GFP_KERNEL);
-		if (!ioc->reply_post_host_index) {
-			dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation "
-				"for cpu_msix_table failed!!!\n", ioc->name));
-			r = -ENOMEM;
-			goto out_free_resources;
-		}
-	}
-
-	ioc->rdpq_array_enable_assigned = 0;
-	ioc->dma_mask = 0;
-	r = mpt2sas_base_map_resources(ioc);
-	if (r)
-		goto out_free_resources;
-
-	if (ioc->is_warpdrive) {
-		ioc->reply_post_host_index[0] = (resource_size_t __iomem *)
-		    &ioc->chip->ReplyPostHostIndex;
-
-		for (i = 1; i < ioc->cpu_msix_table_sz; i++)
-			ioc->reply_post_host_index[i] =
-			(resource_size_t __iomem *)
-			((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1)
-			* 4)));
-	}
-
-	pci_set_drvdata(ioc->pdev, ioc->shost);
-	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
-	if (r)
-		goto out_free_resources;
-
-	r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
-	if (r)
-		goto out_free_resources;
-
-	ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
-	    sizeof(struct mpt2sas_port_facts), GFP_KERNEL);
-	if (!ioc->pfacts) {
-		r = -ENOMEM;
-		goto out_free_resources;
-	}
-
-	for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
-		r = _base_get_port_facts(ioc, i, CAN_SLEEP);
-		if (r)
-			goto out_free_resources;
-	}
-
-	r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
-	if (r)
-		goto out_free_resources;
-
-	init_waitqueue_head(&ioc->reset_wq);
-	/* allocate memory pd handle bitmask list */
-	ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
-	if (ioc->facts.MaxDevHandle % 8)
-		ioc->pd_handles_sz++;
-	ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
-	    GFP_KERNEL);
-	if (!ioc->pd_handles) {
-		r = -ENOMEM;
-		goto out_free_resources;
-	}
-	ioc->blocking_handles = kzalloc(ioc->pd_handles_sz,
-	    GFP_KERNEL);
-	if (!ioc->blocking_handles) {
-		r = -ENOMEM;
-		goto out_free_resources;
-	}
-	ioc->fwfault_debug = mpt2sas_fwfault_debug;
-
-	/* base internal command bits */
-	mutex_init(&ioc->base_cmds.mutex);
-	ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
-	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-
-	/* port_enable command bits */
-	ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
-	ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
-
-	/* transport internal command bits */
-	ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
-	ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
-	mutex_init(&ioc->transport_cmds.mutex);
-
-	/* scsih internal command bits */
-	ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
-	ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
-	mutex_init(&ioc->scsih_cmds.mutex);
-
-	/* task management internal command bits */
-	ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
-	ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
-	mutex_init(&ioc->tm_cmds.mutex);
-
-	/* config page internal command bits */
-	ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
-	ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-	mutex_init(&ioc->config_cmds.mutex);
-
-	/* ctl module internal command bits */
-	ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
-	ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
-	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
-	mutex_init(&ioc->ctl_cmds.mutex);
-
-	if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
-	    !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
-	    !ioc->config_cmds.reply || !ioc->ctl_cmds.reply ||
-	    !ioc->ctl_cmds.sense) {
-		r = -ENOMEM;
-		goto out_free_resources;
-	}
-
-	if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
-	    !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
-	    !ioc->config_cmds.reply || !ioc->ctl_cmds.reply) {
-		r = -ENOMEM;
-		goto out_free_resources;
-	}
-
-	for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
-		ioc->event_masks[i] = -1;
-
-	/* here we enable the events we care about */
-	_base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY);
-	_base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
-	_base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
-	_base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
-	_base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
-	_base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
-	_base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
-	_base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
-	_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
-	_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
-	_base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
-	r = _base_make_ioc_operational(ioc, CAN_SLEEP);
-	if (r)
-		goto out_free_resources;
-
-	ioc->non_operational_loop = 0;
-
-	return 0;
-
- out_free_resources:
-
-	ioc->remove_host = 1;
-	mpt2sas_base_free_resources(ioc);
-	_base_release_memory_pools(ioc);
-	pci_set_drvdata(ioc->pdev, NULL);
-	kfree(ioc->cpu_msix_table);
-	if (ioc->is_warpdrive)
-		kfree(ioc->reply_post_host_index);
-	kfree(ioc->pd_handles);
-	kfree(ioc->blocking_handles);
-	kfree(ioc->tm_cmds.reply);
-	kfree(ioc->transport_cmds.reply);
-	kfree(ioc->scsih_cmds.reply);
-	kfree(ioc->config_cmds.reply);
-	kfree(ioc->base_cmds.reply);
-	kfree(ioc->port_enable_cmds.reply);
-	kfree(ioc->ctl_cmds.reply);
-	kfree(ioc->ctl_cmds.sense);
-	kfree(ioc->pfacts);
-	ioc->ctl_cmds.reply = NULL;
-	ioc->base_cmds.reply = NULL;
-	ioc->tm_cmds.reply = NULL;
-	ioc->scsih_cmds.reply = NULL;
-	ioc->transport_cmds.reply = NULL;
-	ioc->config_cmds.reply = NULL;
-	ioc->pfacts = NULL;
-	return r;
-}
-
-
-/**
- * mpt2sas_base_detach - remove controller instance
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-void
-mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
-{
-
-	dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	mpt2sas_base_stop_watchdog(ioc);
-	mpt2sas_base_free_resources(ioc);
-	_base_release_memory_pools(ioc);
-	pci_set_drvdata(ioc->pdev, NULL);
-	kfree(ioc->cpu_msix_table);
-	if (ioc->is_warpdrive)
-		kfree(ioc->reply_post_host_index);
-	kfree(ioc->pd_handles);
-	kfree(ioc->blocking_handles);
-	kfree(ioc->pfacts);
-	kfree(ioc->ctl_cmds.reply);
-	kfree(ioc->ctl_cmds.sense);
-	kfree(ioc->base_cmds.reply);
-	kfree(ioc->port_enable_cmds.reply);
-	kfree(ioc->tm_cmds.reply);
-	kfree(ioc->transport_cmds.reply);
-	kfree(ioc->scsih_cmds.reply);
-	kfree(ioc->config_cmds.reply);
-}
-
-/**
- * _base_reset_handler - reset callback handler (for base)
- * @ioc: per adapter object
- * @reset_phase: phase
- *
- * The handler for doing any required cleanup or initialization.
- *
- * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
- * MPT2_IOC_DONE_RESET
- *
- * Return nothing.
- */
-static void
-_base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
-{
-	mpt2sas_scsih_reset_handler(ioc, reset_phase);
-	mpt2sas_ctl_reset_handler(ioc, reset_phase);
-	switch (reset_phase) {
-	case MPT2_IOC_PRE_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
-		break;
-	case MPT2_IOC_AFTER_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
-		if (ioc->transport_cmds.status & MPT2_CMD_PENDING) {
-			ioc->transport_cmds.status |= MPT2_CMD_RESET;
-			mpt2sas_base_free_smid(ioc, ioc->transport_cmds.smid);
-			complete(&ioc->transport_cmds.done);
-		}
-		if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
-			ioc->base_cmds.status |= MPT2_CMD_RESET;
-			mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid);
-			complete(&ioc->base_cmds.done);
-		}
-		if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
-			ioc->port_enable_failed = 1;
-			ioc->port_enable_cmds.status |= MPT2_CMD_RESET;
-			mpt2sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
-			if (ioc->is_driver_loading) {
-				ioc->start_scan_failed =
-				    MPI2_IOCSTATUS_INTERNAL_ERROR;
-				ioc->start_scan = 0;
-				ioc->port_enable_cmds.status =
-						MPT2_CMD_NOT_USED;
-			} else
-				complete(&ioc->port_enable_cmds.done);
-
-		}
-		if (ioc->config_cmds.status & MPT2_CMD_PENDING) {
-			ioc->config_cmds.status |= MPT2_CMD_RESET;
-			mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid);
-			ioc->config_cmds.smid = USHRT_MAX;
-			complete(&ioc->config_cmds.done);
-		}
-		break;
-	case MPT2_IOC_DONE_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
-		break;
-	}
-}
-
-/**
- * _wait_for_commands_to_complete - reset controller
- * @ioc: Pointer to MPT_ADAPTER structure
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * This function waiting(3s) for all pending commands to complete
- * prior to putting controller in reset.
- */
-static void
-_wait_for_commands_to_complete(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
-	u32 ioc_state;
-	unsigned long flags;
-	u16 i;
-
-	ioc->pending_io_count = 0;
-	if (sleep_flag != CAN_SLEEP)
-		return;
-
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
-	if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
-		return;
-
-	/* pending command count */
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	for (i = 0; i < ioc->scsiio_depth; i++)
-		if (ioc->scsi_lookup[i].cb_idx != 0xFF)
-			ioc->pending_io_count++;
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-
-	if (!ioc->pending_io_count)
-		return;
-
-	/* wait for pending commands to complete */
-	wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ);
-}
-
-/**
- * mpt2sas_base_hard_reset_handler - reset controller
- * @ioc: Pointer to MPT_ADAPTER structure
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- * @type: FORCE_BIG_HAMMER or SOFT_RESET
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
-    enum reset_type type)
-{
-	int r;
-	unsigned long flags;
-
-	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
-	    __func__));
-
-	if (ioc->pci_error_recovery) {
-		printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n",
-		    ioc->name, __func__);
-		r = 0;
-		goto out_unlocked;
-	}
-
-	if (mpt2sas_fwfault_debug)
-		mpt2sas_halt_firmware(ioc);
-
-	/* TODO - What we really should be doing is pulling
-	 * out all the code associated with NO_SLEEP; its never used.
-	 * That is legacy code from mpt fusion driver, ported over.
-	 * I will leave this BUG_ON here for now till its been resolved.
-	 */
-	BUG_ON(sleep_flag == NO_SLEEP);
-
-	/* wait for an active reset in progress to complete */
-	if (!mutex_trylock(&ioc->reset_in_progress_mutex)) {
-		do {
-			ssleep(1);
-		} while (ioc->shost_recovery == 1);
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
-		    __func__));
-		return ioc->ioc_reset_in_progress_status;
-	}
-
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	ioc->shost_recovery = 1;
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-
-	_base_reset_handler(ioc, MPT2_IOC_PRE_RESET);
-	_wait_for_commands_to_complete(ioc, sleep_flag);
-	_base_mask_interrupts(ioc);
-	r = _base_make_ioc_ready(ioc, sleep_flag, type);
-	if (r)
-		goto out;
-	_base_reset_handler(ioc, MPT2_IOC_AFTER_RESET);
-
-	/* If this hard reset is called while port enable is active, then
-	 * there is no reason to call make_ioc_operational
-	 */
-	if (ioc->is_driver_loading && ioc->port_enable_failed) {
-		ioc->remove_host = 1;
-		r = -EFAULT;
-		goto out;
-	}
-
-	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
-	if (r)
-		goto out;
-
-	if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable)
-		panic("%s: Issue occurred with flashing controller firmware."
-		      "Please reboot the system and ensure that the correct"
-		      " firmware version is running\n", ioc->name);
-
-	r = _base_make_ioc_operational(ioc, sleep_flag);
-	if (!r)
-		_base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
- out:
-	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %s\n",
-	    ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));
-
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	ioc->ioc_reset_in_progress_status = r;
-	ioc->shost_recovery = 0;
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-	mutex_unlock(&ioc->reset_in_progress_mutex);
-
- out_unlocked:
-	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
-	    __func__));
-	return r;
-}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
deleted file mode 100644
index 97ea360c6..000000000
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ /dev/null
@@ -1,1235 +0,0 @@
-/*
- * This is the Fusion MPT base driver providing common API layer interface
- * for access to MPT (Message Passing Technology) firmware.
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_base.h
- * Copyright (C) 2007-2014  LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
- * USA.
- */
-
-#ifndef MPT2SAS_BASE_H_INCLUDED
-#define MPT2SAS_BASE_H_INCLUDED
-
-#include "mpi/mpi2_type.h"
-#include "mpi/mpi2.h"
-#include "mpi/mpi2_ioc.h"
-#include "mpi/mpi2_cnfg.h"
-#include "mpi/mpi2_init.h"
-#include "mpi/mpi2_raid.h"
-#include "mpi/mpi2_tool.h"
-#include "mpi/mpi2_sas.h"
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/scsi_transport_sas.h>
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_eh.h>
-
-#include "mpt2sas_debug.h"
-
-/* driver versioning info */
-#define MPT2SAS_DRIVER_NAME		"mpt2sas"
-#define MPT2SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
-#define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"20.100.00.00"
-#define MPT2SAS_MAJOR_VERSION		20
-#define MPT2SAS_MINOR_VERSION		100
-#define MPT2SAS_BUILD_VERSION		00
-#define MPT2SAS_RELEASE_VERSION		00
-
-/*
- * Set MPT2SAS_SG_DEPTH value based on user input.
- */
-#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE
-#if     CONFIG_SCSI_MPT2SAS_MAX_SGE  < 16
-#define MPT2SAS_SG_DEPTH       16
-#elif CONFIG_SCSI_MPT2SAS_MAX_SGE  > 128
-#define MPT2SAS_SG_DEPTH       128
-#else
-#define MPT2SAS_SG_DEPTH       CONFIG_SCSI_MPT2SAS_MAX_SGE
-#endif
-#else
-#define MPT2SAS_SG_DEPTH       128 /* MAX_HW_SEGMENTS */
-#endif
-
-
-/*
- * Generic Defines
- */
-#define MPT2SAS_SATA_QUEUE_DEPTH	32
-#define MPT2SAS_SAS_QUEUE_DEPTH		254
-#define MPT2SAS_RAID_QUEUE_DEPTH	128
-
-#define MPT_NAME_LENGTH			32	/* generic length of strings */
-#define MPT_STRING_LENGTH		64
-
-#define MPT_MAX_CALLBACKS		16
-
-
-#define	 CAN_SLEEP			1
-#define  NO_SLEEP			0
-
-#define INTERNAL_CMDS_COUNT		10	/* reserved cmds */
-
-#define MPI2_HIM_MASK			0xFFFFFFFF /* mask every bit*/
-
-#define MPT2SAS_INVALID_DEVICE_HANDLE	0xFFFF
-
-
-/*
- * reset phases
- */
-#define MPT2_IOC_PRE_RESET		1 /* prior to host reset */
-#define MPT2_IOC_AFTER_RESET		2 /* just after host reset */
-#define MPT2_IOC_DONE_RESET		3 /* links re-initialized */
-
-/*
- * logging format
- */
-#define MPT2SAS_FMT			"%s: "
-#define MPT2SAS_INFO_FMT		KERN_INFO MPT2SAS_FMT
-#define MPT2SAS_NOTE_FMT		KERN_NOTICE MPT2SAS_FMT
-#define MPT2SAS_WARN_FMT		KERN_WARNING MPT2SAS_FMT
-#define MPT2SAS_ERR_FMT			KERN_ERR MPT2SAS_FMT
-
-/*
- * Dell HBA branding
- */
-#define MPT2SAS_DELL_BRANDING_SIZE                 32
-
-#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING        "Dell 6Gbps SAS HBA"
-#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING    "Dell PERC H200 Adapter"
-#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
-#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING    "Dell PERC H200 Modular"
-#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING   "Dell PERC H200 Embedded"
-#define MPT2SAS_DELL_PERC_H200_BRANDING            "Dell PERC H200"
-#define MPT2SAS_DELL_6GBPS_SAS_BRANDING            "Dell 6Gbps SAS"
-
-/*
- * Dell HBA SSDIDs
- */
-#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID           0x1F1C
-#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID       0x1F1D
-#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID    0x1F1E
-#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID       0x1F1F
-#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID      0x1F20
-#define MPT2SAS_DELL_PERC_H200_SSDID               0x1F21
-#define MPT2SAS_DELL_6GBPS_SAS_SSDID               0x1F22
-
-/*
- * Intel HBA branding
- */
-#define MPT2SAS_INTEL_RMS25JB080_BRANDING    \
-				"Intel(R) Integrated RAID Module RMS25JB080"
-#define MPT2SAS_INTEL_RMS25JB040_BRANDING    \
-				"Intel(R) Integrated RAID Module RMS25JB040"
-#define MPT2SAS_INTEL_RMS25KB080_BRANDING    \
-				"Intel(R) Integrated RAID Module RMS25KB080"
-#define MPT2SAS_INTEL_RMS25KB040_BRANDING    \
-				"Intel(R) Integrated RAID Module RMS25KB040"
-#define MPT2SAS_INTEL_RMS25LB040_BRANDING	\
-				"Intel(R) Integrated RAID Module RMS25LB040"
-#define MPT2SAS_INTEL_RMS25LB080_BRANDING	\
-				"Intel(R) Integrated RAID Module RMS25LB080"
-#define MPT2SAS_INTEL_RMS2LL080_BRANDING	\
-				"Intel Integrated RAID Module RMS2LL080"
-#define MPT2SAS_INTEL_RMS2LL040_BRANDING	\
-				"Intel Integrated RAID Module RMS2LL040"
-#define MPT2SAS_INTEL_RS25GB008_BRANDING       \
-				"Intel(R) RAID Controller RS25GB008"
-#define MPT2SAS_INTEL_SSD910_BRANDING          \
-				"Intel(R) SSD 910 Series"
-/*
- * Intel HBA SSDIDs
- */
-#define MPT2SAS_INTEL_RMS25JB080_SSDID         0x3516
-#define MPT2SAS_INTEL_RMS25JB040_SSDID         0x3517
-#define MPT2SAS_INTEL_RMS25KB080_SSDID         0x3518
-#define MPT2SAS_INTEL_RMS25KB040_SSDID         0x3519
-#define MPT2SAS_INTEL_RMS25LB040_SSDID         0x351A
-#define MPT2SAS_INTEL_RMS25LB080_SSDID         0x351B
-#define MPT2SAS_INTEL_RMS2LL080_SSDID          0x350E
-#define MPT2SAS_INTEL_RMS2LL040_SSDID          0x350F
-#define MPT2SAS_INTEL_RS25GB008_SSDID          0x3000
-#define MPT2SAS_INTEL_SSD910_SSDID             0x3700
-
-/*
- * HP HBA branding
- */
-#define MPT2SAS_HP_3PAR_SSVID                0x1590
-#define MPT2SAS_HP_2_4_INTERNAL_BRANDING        "HP H220 Host Bus Adapter"
-#define MPT2SAS_HP_2_4_EXTERNAL_BRANDING        "HP H221 Host Bus Adapter"
-#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING "HP H222 Host Bus Adapter"
-#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING    "HP H220i Host Bus Adapter"
-#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING    "HP H210i Host Bus Adapter"
-
-/*
- * HO HBA SSDIDs
- */
-#define MPT2SAS_HP_2_4_INTERNAL_SSDID            0x0041
-#define MPT2SAS_HP_2_4_EXTERNAL_SSDID            0x0042
-#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID    0x0043
-#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID        0x0044
-#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID        0x0046
-
-/*
- *  WarpDrive Specific Log codes
- */
-
-#define MPT2_WARPDRIVE_LOGENTRY		(0x8002)
-#define MPT2_WARPDRIVE_LC_SSDT		(0x41)
-#define MPT2_WARPDRIVE_LC_SSDLW		(0x43)
-#define MPT2_WARPDRIVE_LC_SSDLF		(0x44)
-#define MPT2_WARPDRIVE_LC_BRMF		(0x4D)
-
-/*
- * per target private data
- */
-#define MPT_TARGET_FLAGS_RAID_COMPONENT	0x01
-#define MPT_TARGET_FLAGS_VOLUME		0x02
-#define MPT_TARGET_FLAGS_DELETED	0x04
-
-/**
- * struct MPT2SAS_TARGET - starget private hostdata
- * @starget: starget object
- * @sas_address: target sas address
- * @raid_device: raid_device pointer to access volume data
- * @handle: device handle
- * @num_luns: number luns
- * @flags: MPT_TARGET_FLAGS_XXX flags
- * @deleted: target flaged for deletion
- * @tm_busy: target is busy with TM request.
- * @sdev: The sas_device associated with this target
- */
-struct MPT2SAS_TARGET {
-	struct scsi_target *starget;
-	u64	sas_address;
-	struct _raid_device *raid_device;
-	u16	handle;
-	int	num_luns;
-	u32	flags;
-	u8	deleted;
-	u8	tm_busy;
-	struct _sas_device *sdev;
-};
-
-
-/*
- * per device private data
- */
-#define MPT_DEVICE_FLAGS_INIT		0x01
-#define MPT_DEVICE_TLR_ON		0x02
-
-/**
- * struct MPT2SAS_DEVICE - sdev private hostdata
- * @sas_target: starget private hostdata
- * @lun: lun number
- * @flags: MPT_DEVICE_XXX flags
- * @configured_lun: lun is configured
- * @block: device is in SDEV_BLOCK state
- * @tlr_snoop_check: flag used in determining whether to disable TLR
- */
-
-/* OEM Identifiers */
-#define MFG10_OEM_ID_INVALID                   (0x00000000)
-#define MFG10_OEM_ID_DELL                      (0x00000001)
-#define MFG10_OEM_ID_FSC                       (0x00000002)
-#define MFG10_OEM_ID_SUN                       (0x00000003)
-#define MFG10_OEM_ID_IBM                       (0x00000004)
-
-/* GENERIC Flags 0*/
-#define MFG10_GF0_OCE_DISABLED                 (0x00000001)
-#define MFG10_GF0_R1E_DRIVE_COUNT              (0x00000002)
-#define MFG10_GF0_R10_DISPLAY                  (0x00000004)
-#define MFG10_GF0_SSD_DATA_SCRUB_DISABLE       (0x00000008)
-#define MFG10_GF0_SINGLE_DRIVE_R0              (0x00000010)
-
-/* OEM Specific Flags will come from OEM specific header files */
-typedef struct _MPI2_CONFIG_PAGE_MAN_10 {
-    MPI2_CONFIG_PAGE_HEADER Header;                                 /* 00h */
-    U8                      OEMIdentifier;                          /* 04h */
-    U8                      Reserved1;                              /* 05h */
-    U16                     Reserved2;                              /* 08h */
-    U32                     Reserved3;                              /* 0Ch */
-    U32                     GenericFlags0;                          /* 10h */
-    U32                     GenericFlags1;                          /* 14h */
-    U32                     Reserved4;                              /* 18h */
-    U32                     OEMSpecificFlags0;                      /* 1Ch */
-    U32                     OEMSpecificFlags1;                      /* 20h */
-    U32                     Reserved5[18];                          /* 24h-60h*/
-} MPI2_CONFIG_PAGE_MAN_10,
-  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_10,
-  Mpi2ManufacturingPage10_t, MPI2_POINTER pMpi2ManufacturingPage10_t;
-
-#define MFG_PAGE10_HIDE_SSDS_MASK	(0x00000003)
-#define MFG_PAGE10_HIDE_ALL_DISKS	(0x00)
-#define MFG_PAGE10_EXPOSE_ALL_DISKS	(0x01)
-#define MFG_PAGE10_HIDE_IF_VOL_PRESENT	(0x02)
-
-
-struct MPT2SAS_DEVICE {
-	struct MPT2SAS_TARGET *sas_target;
-	unsigned int	lun;
-	u32	flags;
-	u8	configured_lun;
-	u8	block;
-	u8	tlr_snoop_check;
-};
-
-#define MPT2_CMD_NOT_USED	0x8000	/* free */
-#define MPT2_CMD_COMPLETE	0x0001	/* completed */
-#define MPT2_CMD_PENDING	0x0002	/* pending */
-#define MPT2_CMD_REPLY_VALID	0x0004	/* reply is valid */
-#define MPT2_CMD_RESET		0x0008	/* host reset dropped the command */
-
-/**
- * struct _internal_cmd - internal commands struct
- * @mutex: mutex
- * @done: completion
- * @reply: reply message pointer
- * @sense: sense data
- * @status: MPT2_CMD_XXX status
- * @smid: system message id
- */
-struct _internal_cmd {
-	struct mutex mutex;
-	struct completion done;
-	void 	*reply;
-	void	*sense;
-	u16	status;
-	u16	smid;
-};
-
-
-/**
- * struct _sas_device - attached device information
- * @list: sas device list
- * @starget: starget object
- * @sas_address: device sas address
- * @device_name: retrieved from the SAS IDENTIFY frame.
- * @handle: device handle
- * @sas_address_parent: sas address of parent expander or sas host
- * @enclosure_handle: enclosure handle
- * @enclosure_logical_id: enclosure logical identifier
- * @volume_handle: volume handle (valid when hidden raid member)
- * @volume_wwid: volume unique identifier
- * @device_info: bitfield provides detailed info about the device
- * @id: target id
- * @channel: target channel
- * @slot: number number
- * @phy: phy identifier provided in sas device page 0
- * @responding: used in _scsih_sas_device_mark_responding
- * @pfa_led_on: flag for PFA LED status
- */
-struct _sas_device {
-	struct list_head list;
-	struct scsi_target *starget;
-	u64	sas_address;
-	u64	device_name;
-	u16	handle;
-	u64	sas_address_parent;
-	u16	enclosure_handle;
-	u64	enclosure_logical_id;
-	u16	volume_handle;
-	u64	volume_wwid;
-	u32	device_info;
-	int	id;
-	int	channel;
-	u16	slot;
-	u8	phy;
-	u8	responding;
-	u8	pfa_led_on;
-	struct kref refcount;
-};
-
-static inline void sas_device_get(struct _sas_device *s)
-{
-	kref_get(&s->refcount);
-}
-
-static inline void sas_device_free(struct kref *r)
-{
-	kfree(container_of(r, struct _sas_device, refcount));
-}
-
-static inline void sas_device_put(struct _sas_device *s)
-{
-	kref_put(&s->refcount, sas_device_free);
-}
-
-/**
- * struct _raid_device - raid volume link list
- * @list: sas device list
- * @starget: starget object
- * @sdev: scsi device struct (volumes are single lun)
- * @wwid: unique identifier for the volume
- * @handle: device handle
- * @block_size: Block size of the volume
- * @id: target id
- * @channel: target channel
- * @volume_type: the raid level
- * @device_info: bitfield provides detailed info about the hidden components
- * @num_pds: number of hidden raid components
- * @responding: used in _scsih_raid_device_mark_responding
- * @percent_complete: resync percent complete
- * @direct_io_enabled: Whether direct io to PDs are allowed or not
- * @stripe_exponent: X where 2powX is the stripe sz in blocks
- * @block_exponent: X where 2powX is the block sz in bytes
- * @max_lba: Maximum number of LBA in the volume
- * @stripe_sz: Stripe Size of the volume
- * @device_info: Device info of the volume member disk
- * @pd_handle: Array of handles of the physical drives for direct I/O in le16
- */
-#define MPT_MAX_WARPDRIVE_PDS		8
-struct _raid_device {
-	struct list_head list;
-	struct scsi_target *starget;
-	struct scsi_device *sdev;
-	u64	wwid;
-	u16	handle;
-	u16	block_sz;
-	int	id;
-	int	channel;
-	u8	volume_type;
-	u8	num_pds;
-	u8	responding;
-	u8	percent_complete;
-	u8	direct_io_enabled;
-	u8	stripe_exponent;
-	u8	block_exponent;
-	u64	max_lba;
-	u32	stripe_sz;
-	u32	device_info;
-	u16	pd_handle[MPT_MAX_WARPDRIVE_PDS];
-};
-
-/**
- * struct _boot_device - boot device info
- * @is_raid: flag to indicate whether this is volume
- * @device: holds pointer for either struct _sas_device or
- *     struct _raid_device
- */
-struct _boot_device {
-	u8 is_raid;
-	void *device;
-};
-
-/**
- * struct _sas_port - wide/narrow sas port information
- * @port_list: list of ports belonging to expander
- * @num_phys: number of phys belonging to this port
- * @remote_identify: attached device identification
- * @rphy: sas transport rphy object
- * @port: sas transport wide/narrow port object
- * @phy_list: _sas_phy list objects belonging to this port
- */
-struct _sas_port {
-	struct list_head port_list;
-	u8	num_phys;
-	struct sas_identify remote_identify;
-	struct sas_rphy *rphy;
-	struct sas_port *port;
-	struct list_head phy_list;
-};
-
-/**
- * struct _sas_phy - phy information
- * @port_siblings: list of phys belonging to a port
- * @identify: phy identification
- * @remote_identify: attached device identification
- * @phy: sas transport phy object
- * @phy_id: unique phy id
- * @handle: device handle for this phy
- * @attached_handle: device handle for attached device
- * @phy_belongs_to_port: port has been created for this phy
- */
-struct _sas_phy {
-	struct list_head port_siblings;
-	struct sas_identify identify;
-	struct sas_identify remote_identify;
-	struct sas_phy *phy;
-	u8	phy_id;
-	u16	handle;
-	u16	attached_handle;
-	u8	phy_belongs_to_port;
-};
-
-/**
- * struct _sas_node - sas_host/expander information
- * @list: list of expanders
- * @parent_dev: parent device class
- * @num_phys: number phys belonging to this sas_host/expander
- * @sas_address: sas address of this sas_host/expander
- * @handle: handle for this sas_host/expander
- * @sas_address_parent: sas address of parent expander or sas host
- * @enclosure_handle: handle for this a member of an enclosure
- * @device_info: bitwise defining capabilities of this sas_host/expander
- * @responding: used in _scsih_expander_device_mark_responding
- * @phy: a list of phys that make up this sas_host/expander
- * @sas_port_list: list of ports attached to this sas_host/expander
- */
-struct _sas_node {
-	struct list_head list;
-	struct device *parent_dev;
-	u8	num_phys;
-	u64	sas_address;
-	u16	handle;
-	u64	sas_address_parent;
-	u16	enclosure_handle;
-	u64	enclosure_logical_id;
-	u8	responding;
-	struct	_sas_phy *phy;
-	struct list_head sas_port_list;
-};
-
-/**
- * enum reset_type - reset state
- * @FORCE_BIG_HAMMER: issue diagnostic reset
- * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer
- */
-enum reset_type {
-	FORCE_BIG_HAMMER,
-	SOFT_RESET,
-};
-
-/**
- * struct chain_tracker - firmware chain tracker
- * @chain_buffer: chain buffer
- * @chain_buffer_dma: physical address
- * @tracker_list: list of free request (ioc->free_chain_list)
- */
-struct chain_tracker {
-	void *chain_buffer;
-	dma_addr_t chain_buffer_dma;
-	struct list_head tracker_list;
-};
-
-/**
- * struct scsiio_tracker - scsi mf request tracker
- * @smid: system message id
- * @scmd: scsi request pointer
- * @cb_idx: callback index
- * @direct_io: To indicate whether I/O is direct (WARPDRIVE)
- * @chain_list: list of chains associated to this IO
- * @tracker_list: list of free request (ioc->free_list)
- */
-struct scsiio_tracker {
-	u16	smid;
-	struct scsi_cmnd *scmd;
-	u8	cb_idx;
-	u8	direct_io;
-	struct list_head chain_list;
-	struct list_head tracker_list;
-};
-
-/**
- * struct request_tracker - firmware request tracker
- * @smid: system message id
- * @cb_idx: callback index
- * @tracker_list: list of free request (ioc->free_list)
- */
-struct request_tracker {
-	u16	smid;
-	u8	cb_idx;
-	struct list_head tracker_list;
-};
-
-/**
- * struct _tr_list - target reset list
- * @handle: device handle
- * @state: state machine
- */
-struct _tr_list {
-	struct list_head list;
-	u16	handle;
-	u16	state;
-};
-
-typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
-
-/**
- * struct adapter_reply_queue - the reply queue struct
- * @ioc: per adapter object
- * @msix_index: msix index into vector table
- * @vector: irq vector
- * @reply_post_host_index: head index in the pool where FW completes IO
- * @reply_post_free: reply post base virt address
- * @name: the name registered to request_irq()
- * @busy: isr is actively processing replies on another cpu
- * @list: this list
-*/
-struct adapter_reply_queue {
-	struct MPT2SAS_ADAPTER	*ioc;
-	u8			msix_index;
-	unsigned int		vector;
-	u32			reply_post_host_index;
-	Mpi2ReplyDescriptorsUnion_t *reply_post_free;
-	char			name[MPT_NAME_LENGTH];
-	atomic_t		busy;
-	cpumask_var_t		affinity_hint;
-	struct list_head	list;
-};
-
-/* IOC Facts and Port Facts converted from little endian to cpu */
-union mpi2_version_union {
-	MPI2_VERSION_STRUCT		Struct;
-	u32				Word;
-};
-
-struct mpt2sas_facts {
-	u16			MsgVersion;
-	u16			HeaderVersion;
-	u8			IOCNumber;
-	u8			VP_ID;
-	u8			VF_ID;
-	u16			IOCExceptions;
-	u16			IOCStatus;
-	u32			IOCLogInfo;
-	u8			MaxChainDepth;
-	u8			WhoInit;
-	u8			NumberOfPorts;
-	u8			MaxMSIxVectors;
-	u16			RequestCredit;
-	u16			ProductID;
-	u32			IOCCapabilities;
-	union mpi2_version_union	FWVersion;
-	u16			IOCRequestFrameSize;
-	u16			Reserved3;
-	u16			MaxInitiators;
-	u16			MaxTargets;
-	u16			MaxSasExpanders;
-	u16			MaxEnclosures;
-	u16			ProtocolFlags;
-	u16			HighPriorityCredit;
-	u16			MaxReplyDescriptorPostQueueDepth;
-	u8			ReplyFrameSize;
-	u8			MaxVolumes;
-	u16			MaxDevHandle;
-	u16			MaxPersistentEntries;
-	u16			MinDevHandle;
-};
-
-struct mpt2sas_port_facts {
-	u8			PortNumber;
-	u8			VP_ID;
-	u8			VF_ID;
-	u8			PortType;
-	u16			MaxPostedCmdBuffers;
-};
-
-struct reply_post_struct {
-	Mpi2ReplyDescriptorsUnion_t	*reply_post_free;
-	dma_addr_t			reply_post_free_dma;
-};
-
-/**
- * enum mutex_type - task management mutex type
- * @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it
- * @TM_MUTEX_ON: mutex is required
- */
-enum mutex_type {
-	TM_MUTEX_OFF = 0,
-	TM_MUTEX_ON = 1,
-};
-
-typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
-/**
- * struct MPT2SAS_ADAPTER - per adapter struct
- * @list: ioc_list
- * @shost: shost object
- * @id: unique adapter id
- * @cpu_count: number online cpus
- * @name: generic ioc string
- * @tmp_string: tmp string used for logging
- * @pdev: pci pdev object
- * @chip: memory mapped register space
- * @chip_phys: physical addrss prior to mapping
- * @logging_level: see mpt2sas_debug.h
- * @fwfault_debug: debuging FW timeouts
- * @ir_firmware: IR firmware present
- * @bars: bitmask of BAR's that must be configured
- * @mask_interrupts: ignore interrupt
- * @dma_mask: used to set the consistent dma mask
- * @fault_reset_work_q_name: fw fault work queue
- * @fault_reset_work_q: ""
- * @fault_reset_work: ""
- * @firmware_event_name: fw event work queue
- * @firmware_event_thread: ""
- * @fw_events_off: flag to turn off fw event handling
- * @fw_event_lock:
- * @fw_event_list: list of fw events
- * @aen_event_read_flag: event log was read
- * @broadcast_aen_busy: broadcast aen waiting to be serviced
- * @shost_recovery: host reset in progress
- * @ioc_reset_in_progress_lock:
- * @ioc_link_reset_in_progress: phy/hard reset in progress
- * @ignore_loginfos: ignore loginfos during task management
- * @remove_host: flag for when driver unloads, to avoid sending dev resets
- * @pci_error_recovery: flag to prevent ioc access until slot reset completes
- * @wait_for_discovery_to_complete: flag set at driver load time when
- *                                               waiting on reporting devices
- * @is_driver_loading: flag set at driver load time
- * @port_enable_failed: flag set when port enable has failed
- * @start_scan: flag set from scan_start callback, cleared from _mpt2sas_fw_work
- * @start_scan_failed: means port enable failed, return's the ioc_status
- * @msix_enable: flag indicating msix is enabled
- * @msix_vector_count: number msix vectors
- * @cpu_msix_table: table for mapping cpus to msix index
- * @cpu_msix_table_sz: table size
- * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands
- * @scsi_io_cb_idx: shost generated commands
- * @tm_cb_idx: task management commands
- * @scsih_cb_idx: scsih internal commands
- * @transport_cb_idx: transport internal commands
- * @ctl_cb_idx: clt internal commands
- * @base_cb_idx: base internal commands
- * @config_cb_idx: base internal commands
- * @tm_tr_cb_idx : device removal target reset handshake
- * @tm_tr_volume_cb_idx : volume removal target reset
- * @base_cmds:
- * @transport_cmds:
- * @scsih_cmds:
- * @tm_cmds:
- * @ctl_cmds:
- * @config_cmds:
- * @base_add_sg_single: handler for either 32/64 bit sgl's
- * @event_type: bits indicating which events to log
- * @event_context: unique id for each logged event
- * @event_log: event log pointer
- * @event_masks: events that are masked
- * @facts: static facts data
- * @pfacts: static port facts data
- * @manu_pg0: static manufacturing page 0
- * @manu_pg10: static manufacturing page 10
- * @bios_pg2: static bios page 2
- * @bios_pg3: static bios page 3
- * @ioc_pg8: static ioc page 8
- * @iounit_pg0: static iounit page 0
- * @iounit_pg1: static iounit page 1
- * @iounit_pg8: static iounit page 8
- * @sas_hba: sas host object
- * @sas_expander_list: expander object list
- * @sas_node_lock:
- * @sas_device_list: sas device object list
- * @sas_device_init_list: sas device object list (used only at init time)
- * @sas_device_lock:
- * @io_missing_delay: time for IO completed by fw when PDR enabled
- * @device_missing_delay: time for device missing by fw when PDR enabled
- * @sas_id : used for setting volume target IDs
- * @blocking_handles: bitmask used to identify which devices need blocking
- * @pd_handles : bitmask for PD handles
- * @pd_handles_sz : size of pd_handle bitmask
- * @config_page_sz: config page size
- * @config_page: reserve memory for config page payload
- * @config_page_dma:
- * @hba_queue_depth: hba request queue depth
- * @sge_size: sg element size for either 32/64 bit
- * @scsiio_depth: SCSI_IO queue depth
- * @request_sz: per request frame size
- * @request: pool of request frames
- * @request_dma:
- * @request_dma_sz:
- * @scsi_lookup: firmware request tracker list
- * @scsi_lookup_lock:
- * @free_list: free list of request
- * @chain: pool of chains
- * @pending_io_count:
- * @reset_wq:
- * @chain_dma:
- * @max_sges_in_main_message: number sg elements in main message
- * @max_sges_in_chain_message: number sg elements per chain
- * @chains_needed_per_io: max chains per io
- * @chain_offset_value_for_main_message: location 1st sg in main
- * @chain_depth: total chains allocated
- * @hi_priority_smid:
- * @hi_priority:
- * @hi_priority_dma:
- * @hi_priority_depth:
- * @hpr_lookup:
- * @hpr_free_list:
- * @internal_smid:
- * @internal:
- * @internal_dma:
- * @internal_depth:
- * @internal_lookup:
- * @internal_free_list:
- * @sense: pool of sense
- * @sense_dma:
- * @sense_dma_pool:
- * @reply_depth: hba reply queue depth:
- * @reply_sz: per reply frame size:
- * @reply: pool of replys:
- * @reply_dma:
- * @reply_dma_pool:
- * @reply_free_queue_depth: reply free depth
- * @reply_free: pool for reply free queue (32 bit addr)
- * @reply_free_dma:
- * @reply_free_dma_pool:
- * @reply_free_host_index: tail index in pool to insert free replys
- * @reply_post_queue_depth: reply post queue depth
- * @reply_post_struct: struct for reply_post_free physical & virt address
- * @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init
- * @rdpq_array_enable: rdpq_array support is enabled in the driver
- * @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag
- *				is assigned only ones
- * @reply_queue_count: number of reply queue's
- * @reply_queue_list: link list contaning the reply queue info
- * @reply_post_host_index: head index in the pool where FW completes IO
- * @delayed_tr_list: target reset link list
- * @delayed_tr_volume_list: volume target reset link list
- * @@temp_sensors_count: flag to carry the number of temperature sensors
- * @pci_access_mutex: Mutex to synchronize ioctl,sysfs show path and
- * pci resource handling. PCI resource freeing will lead to free
- * vital hardware/memory resource, which might be in use by cli/sysfs
- * path functions resulting in Null pointer reference followed by kernel
- * crash. To avoid the above race condition we use mutex syncrhonization
- * which ensures the syncrhonization between cli/sysfs_show path
- */
-struct MPT2SAS_ADAPTER {
-	struct list_head list;
-	struct Scsi_Host *shost;
-	u8		id;
-	int		cpu_count;
-	char		name[MPT_NAME_LENGTH];
-	char		tmp_string[MPT_STRING_LENGTH];
-	struct pci_dev	*pdev;
-	Mpi2SystemInterfaceRegs_t __iomem *chip;
-	resource_size_t	chip_phys;
-	int		logging_level;
-	int		fwfault_debug;
-	u8		ir_firmware;
-	int		bars;
-	u8		mask_interrupts;
-	int		dma_mask;
-
-	/* fw fault handler */
-	char		fault_reset_work_q_name[20];
-	struct workqueue_struct *fault_reset_work_q;
-	struct delayed_work fault_reset_work;
-
-	/* fw event handler */
-	char		firmware_event_name[20];
-	struct workqueue_struct	*firmware_event_thread;
-	spinlock_t	fw_event_lock;
-	struct list_head fw_event_list;
-
-	 /* misc flags */
-	int		aen_event_read_flag;
-	u8		broadcast_aen_busy;
-	u16		broadcast_aen_pending;
-	u8		shost_recovery;
-
-	struct mutex	reset_in_progress_mutex;
-	spinlock_t 	ioc_reset_in_progress_lock;
-	u8		ioc_link_reset_in_progress;
-	u8		ioc_reset_in_progress_status;
-
-	u8		ignore_loginfos;
-	u8		remove_host;
-	u8		pci_error_recovery;
-	u8		wait_for_discovery_to_complete;
-	struct completion	port_enable_done;
-	u8		is_driver_loading;
-	u8		port_enable_failed;
-
-	u8		start_scan;
-	u16		start_scan_failed;
-
-	u8		msix_enable;
-	u16		msix_vector_count;
-	u8		*cpu_msix_table;
-	resource_size_t	__iomem **reply_post_host_index;
-	u16		cpu_msix_table_sz;
-	u32		ioc_reset_count;
-	MPT2SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
-	u32             non_operational_loop;
-
-	/* internal commands, callback index */
-	u8		scsi_io_cb_idx;
-	u8		tm_cb_idx;
-	u8		transport_cb_idx;
-	u8		scsih_cb_idx;
-	u8		ctl_cb_idx;
-	u8		base_cb_idx;
-	u8		port_enable_cb_idx;
-	u8		config_cb_idx;
-	u8		tm_tr_cb_idx;
-	u8		tm_tr_volume_cb_idx;
-	u8		tm_sas_control_cb_idx;
-	struct _internal_cmd base_cmds;
-	struct _internal_cmd port_enable_cmds;
-	struct _internal_cmd transport_cmds;
-	struct _internal_cmd scsih_cmds;
-	struct _internal_cmd tm_cmds;
-	struct _internal_cmd ctl_cmds;
-	struct _internal_cmd config_cmds;
-
-	MPT_ADD_SGE	base_add_sg_single;
-
-	/* event log */
-	u32		event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
-	u32		event_context;
-	void		*event_log;
-	u32		event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
-
-	/* static config pages */
-	struct mpt2sas_facts facts;
-	struct mpt2sas_port_facts *pfacts;
-	Mpi2ManufacturingPage0_t manu_pg0;
-	Mpi2BiosPage2_t	bios_pg2;
-	Mpi2BiosPage3_t	bios_pg3;
-	Mpi2IOCPage8_t ioc_pg8;
-	Mpi2IOUnitPage0_t iounit_pg0;
-	Mpi2IOUnitPage1_t iounit_pg1;
-	Mpi2IOUnitPage8_t iounit_pg8;
-
-	struct _boot_device req_boot_device;
-	struct _boot_device req_alt_boot_device;
-	struct _boot_device current_boot_device;
-
-	/* sas hba, expander, and device list */
-	struct _sas_node sas_hba;
-	struct list_head sas_expander_list;
-	spinlock_t	sas_node_lock;
-	struct list_head sas_device_list;
-	struct list_head sas_device_init_list;
-	spinlock_t	sas_device_lock;
-	struct list_head raid_device_list;
-	spinlock_t	raid_device_lock;
-	u8		io_missing_delay;
-	u16		device_missing_delay;
-	int		sas_id;
-	void		*blocking_handles;
-	void		*pd_handles;
-	u16		pd_handles_sz;
-
-	/* config page */
-	u16		config_page_sz;
-	void 		*config_page;
-	dma_addr_t	config_page_dma;
-
-	/* scsiio request */
-	u16		hba_queue_depth;
-	u16		sge_size;
-	u16 		scsiio_depth;
-	u16		request_sz;
-	u8		*request;
-	dma_addr_t	request_dma;
-	u32		request_dma_sz;
-	struct scsiio_tracker *scsi_lookup;
-	ulong		scsi_lookup_pages;
-	spinlock_t 	scsi_lookup_lock;
-	struct list_head free_list;
-	int		pending_io_count;
-	wait_queue_head_t reset_wq;
-
-	/* chain */
-	struct chain_tracker *chain_lookup;
-	struct list_head free_chain_list;
-	struct dma_pool *chain_dma_pool;
-	ulong		chain_pages;
-	u16 		max_sges_in_main_message;
-	u16		max_sges_in_chain_message;
-	u16		chains_needed_per_io;
-	u16		chain_offset_value_for_main_message;
-	u32		chain_depth;
-
-	/* hi-priority queue */
-	u16		hi_priority_smid;
-	u8		*hi_priority;
-	dma_addr_t	hi_priority_dma;
-	u16		hi_priority_depth;
-	struct request_tracker *hpr_lookup;
-	struct list_head hpr_free_list;
-
-	/* internal queue */
-	u16		internal_smid;
-	u8		*internal;
-	dma_addr_t	internal_dma;
-	u16		internal_depth;
-	struct request_tracker *internal_lookup;
-	struct list_head internal_free_list;
-
-	/* sense */
-	u8		*sense;
-	dma_addr_t	sense_dma;
-	struct dma_pool *sense_dma_pool;
-
-	/* reply */
-	u16		reply_sz;
-	u8		*reply;
-	dma_addr_t	reply_dma;
-	u32		reply_dma_max_address;
-	u32		reply_dma_min_address;
-	struct dma_pool *reply_dma_pool;
-
-	/* reply free queue */
-	u16 		reply_free_queue_depth;
-	__le32		*reply_free;
-	dma_addr_t	reply_free_dma;
-	struct dma_pool *reply_free_dma_pool;
-	u32		reply_free_host_index;
-
-	/* reply post queue */
-	u16 		reply_post_queue_depth;
-	struct reply_post_struct *reply_post;
-	u8		rdpq_array_capable;
-	u8		rdpq_array_enable;
-	u8		rdpq_array_enable_assigned;
-	struct dma_pool *reply_post_free_dma_pool;
-	u8		reply_queue_count;
-	struct list_head reply_queue_list;
-
-	struct list_head delayed_tr_list;
-	struct list_head delayed_tr_volume_list;
-	u8		temp_sensors_count;
-
-	/* diag buffer support */
-	u8		*diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
-	u32		diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT];
-	dma_addr_t	diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT];
-	u8		diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT];
-	u32		unique_id[MPI2_DIAG_BUF_TYPE_COUNT];
-	Mpi2ManufacturingPage10_t manu_pg10;
-	u32		product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23];
-	u32		diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
-	u32		ring_buffer_offset;
-	u32		ring_buffer_sz;
-	u8		is_warpdrive;
-	u8		hide_ir_msg;
-	u8		mfg_pg10_hide_flag;
-	u8		hide_drives;
-
-	struct mutex pci_access_mutex;
-};
-
-typedef u8 (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-    u32 reply);
-
-
-/* base shared API */
-extern struct list_head mpt2sas_ioc_list;
-/* spinlock on list operations over IOCs
- * Case: when multiple warpdrive cards(IOCs) are in use
- * Each IOC will added to the ioc list stucture on initialization.
- * Watchdog threads run at regular intervals to check IOC for any
- * fault conditions which will trigger the dead_ioc thread to
- * deallocate pci resource, resulting deleting the IOC netry from list,
- * this deletion need to protected by spinlock to enusre that
- * ioc removal is syncrhonized, if not synchronized it might lead to
- * list_del corruption as the ioc list is traversed in cli path
- */
-extern spinlock_t gioc_lock;
-void mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc);
-void mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc);
-
-int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc);
-void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc);
-int mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc);
-void mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc);
-int mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
-    enum reset_type type);
-
-void *mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr);
-__le32 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc,
-    u16 smid);
-void mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER *ioc);
-
-/* hi-priority queue */
-u16 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
-u16 mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
-    struct scsi_cmnd *scmd);
-
-u16 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
-void mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-    u16 handle);
-void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-    u16 io_index);
-void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_initialize_callback_handler(void);
-u8 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func);
-void mpt2sas_base_release_callback_handler(u8 cb_idx);
-
-u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-    u32 reply);
-u8 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-	u8 msix_index,	u32 reply);
-void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr);
-
-u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked);
-
-void mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code);
-int mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2SasIoUnitControlReply_t *mpi_reply, Mpi2SasIoUnitControlRequest_t
-    *mpi_request);
-int mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request);
-void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type);
-
-void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
-
-void mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
-	u16 device_missing_delay, u8 io_missing_delay);
-
-int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc);
-
-/* scsih shared API */
-void mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
-    u32 reply);
-int mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle,
-	uint channel, uint id, uint lun, u8 type, u16 smid_task,
-	ulong timeout, enum mutex_type m_type);
-void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
-void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
-void mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
-void mpt2sas_device_remove_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
-		u64 sas_address);
-struct _sas_node *mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc,
-    u16 handle);
-struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER
-    *ioc, u64 sas_address);
-struct _sas_device *mpt2sas_get_sdev_by_addr(
-    struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
-struct _sas_device *__mpt2sas_get_sdev_by_addr(
-    struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
-
-void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc);
-void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
-
-/* config shared API */
-u8 mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-    u32 reply);
-int mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys);
-int mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page);
-int mpt2sas_config_get_manufacturing_pg10(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage10_t *config_page);
-int mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2BiosPage2_t *config_page);
-int mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2BiosPage3_t *config_page);
-int mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2IOUnitPage0_t *config_page);
-int mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz);
-int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2IOUnitPage1_t *config_page);
-int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2IOUnitPage1_t *config_page);
-int mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
-	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page);
-int mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
-	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
-int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
-int mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
-int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2IOCPage8_t *config_page);
-int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, u16 handle);
-int mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number);
-int mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number);
-int mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 *num_pds);
-int mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, u32 handle, u16 sz);
-int mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
-    u32 form_specific);
-int mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
-    u16 *volume_handle);
-int mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle,
-    u64 *wwid);
-/* ctl shared API */
-extern struct device_attribute *mpt2sas_host_attrs[];
-extern struct device_attribute *mpt2sas_dev_attrs[];
-void mpt2sas_ctl_init(void);
-void mpt2sas_ctl_exit(void);
-u8 mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-    u32 reply);
-void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
-void mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
-    u32 reply);
-void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventNotificationReply_t *mpi_reply);
-
-void mpt2sas_enable_diag_buffer(struct MPT2SAS_ADAPTER *ioc,
-	u8 bits_to_regsiter);
-
-/* transport shared API */
-u8 mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-    u32 reply);
-struct _sas_port *mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc,
-     u16 handle, u64 sas_address);
-void mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
-     u64 sas_address_parent);
-int mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
-    *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev);
-int mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
-    *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev);
-void mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc,
-     u64 sas_address, u16 handle, u8 phy_number, u8 link_rate);
-extern struct sas_function_template mpt2sas_transport_functions;
-extern struct scsi_transport_template *mpt2sas_transport_template;
-extern int scsi_internal_device_block(struct scsi_device *sdev);
-extern u8 mpt2sas_stm_zero_smid_handler(struct MPT2SAS_ADAPTER *ioc,
-    u8 msix_index, u32 reply);
-extern int scsi_internal_device_unblock(struct scsi_device *sdev,
-					enum scsi_device_state new_state);
-
-#endif /* MPT2SAS_BASE_H_INCLUDED */
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
deleted file mode 100644
index c43815b1a..000000000
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ /dev/null
@@ -1,1527 +0,0 @@
-/*
- * This module provides common API for accessing firmware configuration pages
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
- * Copyright (C) 2007-2014  LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
- * USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/blkdev.h>
-#include <linux/sched.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "mpt2sas_base.h"
-
-/* local definitions */
-
-/* Timeout for config page request (in seconds) */
-#define MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT 15
-
-/* Common sgl flags for READING a config page. */
-#define MPT2_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
-    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
-    | MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT)
-
-/* Common sgl flags for WRITING a config page. */
-#define MPT2_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
-    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
-    | MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \
-    << MPI2_SGE_FLAGS_SHIFT)
-
-/**
- * struct config_request - obtain dma memory via routine
- * @sz: size
- * @page: virt pointer
- * @page_dma: phys pointer
- *
- */
-struct config_request{
-	u16			sz;
-	void			*page;
-	dma_addr_t		page_dma;
-};
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _config_display_some_debug - debug routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @calling_function_name: string pass from calling function
- * @mpi_reply: reply message frame
- * Context: none.
- *
- * Function for displaying debug info helpful when debugging issues
- * in this module.
- */
-static void
-_config_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-    char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
-{
-	Mpi2ConfigRequest_t *mpi_request;
-	char *desc = NULL;
-
-	if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
-		return;
-
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) {
-	case MPI2_CONFIG_PAGETYPE_IO_UNIT:
-		desc = "io_unit";
-		break;
-	case MPI2_CONFIG_PAGETYPE_IOC:
-		desc = "ioc";
-		break;
-	case MPI2_CONFIG_PAGETYPE_BIOS:
-		desc = "bios";
-		break;
-	case MPI2_CONFIG_PAGETYPE_RAID_VOLUME:
-		desc = "raid_volume";
-		break;
-	case MPI2_CONFIG_PAGETYPE_MANUFACTURING:
-		desc = "manufaucturing";
-		break;
-	case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK:
-		desc = "physdisk";
-		break;
-	case MPI2_CONFIG_PAGETYPE_EXTENDED:
-		switch (mpi_request->ExtPageType) {
-		case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT:
-			desc = "sas_io_unit";
-			break;
-		case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER:
-			desc = "sas_expander";
-			break;
-		case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE:
-			desc = "sas_device";
-			break;
-		case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY:
-			desc = "sas_phy";
-			break;
-		case MPI2_CONFIG_EXTPAGETYPE_LOG:
-			desc = "log";
-			break;
-		case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE:
-			desc = "enclosure";
-			break;
-		case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG:
-			desc = "raid_config";
-			break;
-		case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
-			desc = "driver_mapping";
-			break;
-		}
-		break;
-	}
-
-	if (!desc)
-		return;
-
-	printk(MPT2SAS_INFO_FMT "%s: %s(%d), action(%d), form(0x%08x), "
-	    "smid(%d)\n", ioc->name, calling_function_name, desc,
-	    mpi_request->Header.PageNumber, mpi_request->Action,
-	    le32_to_cpu(mpi_request->PageAddress), smid);
-
-	if (!mpi_reply)
-		return;
-
-	if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
-		printk(MPT2SAS_INFO_FMT
-		    "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
-		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
-		    le32_to_cpu(mpi_reply->IOCLogInfo));
-}
-#endif
-
-/**
- * _config_alloc_config_dma_memory - obtain physical memory
- * @ioc: per adapter object
- * @mem: struct config_request
- *
- * A wrapper for obtaining dma-able memory for config page request.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_config_alloc_config_dma_memory(struct MPT2SAS_ADAPTER *ioc,
-    struct config_request *mem)
-{
-	int r = 0;
-
-	if (mem->sz > ioc->config_page_sz) {
-		mem->page = dma_alloc_coherent(&ioc->pdev->dev, mem->sz,
-		    &mem->page_dma, GFP_KERNEL);
-		if (!mem->page) {
-			printk(MPT2SAS_ERR_FMT "%s: dma_alloc_coherent"
-			    " failed asking for (%d) bytes!!\n",
-			    ioc->name, __func__, mem->sz);
-			r = -ENOMEM;
-		}
-	} else { /* use tmp buffer if less than 512 bytes */
-		mem->page = ioc->config_page;
-		mem->page_dma = ioc->config_page_dma;
-	}
-	return r;
-}
-
-/**
- * _config_free_config_dma_memory - wrapper to free the memory
- * @ioc: per adapter object
- * @mem: struct config_request
- *
- * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static void
-_config_free_config_dma_memory(struct MPT2SAS_ADAPTER *ioc,
-    struct config_request *mem)
-{
-	if (mem->sz > ioc->config_page_sz)
-		dma_free_coherent(&ioc->pdev->dev, mem->sz, mem->page,
-		    mem->page_dma);
-}
-
-/**
- * mpt2sas_config_done - config page completion routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: none.
- *
- * The callback handler when using _config_request.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-u8
-mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-    u32 reply)
-{
-	MPI2DefaultReply_t *mpi_reply;
-
-	if (ioc->config_cmds.status == MPT2_CMD_NOT_USED)
-		return 1;
-	if (ioc->config_cmds.smid != smid)
-		return 1;
-	ioc->config_cmds.status |= MPT2_CMD_COMPLETE;
-	mpi_reply =  mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (mpi_reply) {
-		ioc->config_cmds.status |= MPT2_CMD_REPLY_VALID;
-		memcpy(ioc->config_cmds.reply, mpi_reply,
-		    mpi_reply->MsgLength*4);
-	}
-	ioc->config_cmds.status &= ~MPT2_CMD_PENDING;
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	_config_display_some_debug(ioc, smid, "config_done", mpi_reply);
-#endif
-	ioc->config_cmds.smid = USHRT_MAX;
-	complete(&ioc->config_cmds.done);
-	return 1;
-}
-
-/**
- * _config_request - main routine for sending config page requests
- * @ioc: per adapter object
- * @mpi_request: request message frame
- * @mpi_reply: reply mf payload returned from firmware
- * @timeout: timeout in seconds
- * @config_page: contents of the config page
- * @config_page_sz: size of config page
- * Context: sleep
- *
- * A generic API for config page requests to firmware.
- *
- * The ioc->config_cmds.status flag should be MPT2_CMD_NOT_USED before calling
- * this API.
- *
- * The callback index is set inside `ioc->config_cb_idx.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
-    *mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout,
-    void *config_page, u16 config_page_sz)
-{
-	u16 smid;
-	u32 ioc_state;
-	unsigned long timeleft;
-	Mpi2ConfigRequest_t *config_request;
-	int r;
-	u8 retry_count, issue_host_reset = 0;
-	u16 wait_state_count;
-	struct config_request mem;
-
-	mutex_lock(&ioc->config_cmds.mutex);
-	if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n",
-		    ioc->name, __func__);
-		mutex_unlock(&ioc->config_cmds.mutex);
-		return -EAGAIN;
-	}
-
-	retry_count = 0;
-	memset(&mem, 0, sizeof(struct config_request));
-
-	mpi_request->VF_ID = 0; /* TODO */
-	mpi_request->VP_ID = 0;
-
-	if (config_page) {
-		mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion;
-		mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber;
-		mpi_request->Header.PageType = mpi_reply->Header.PageType;
-		mpi_request->Header.PageLength = mpi_reply->Header.PageLength;
-		mpi_request->ExtPageLength = mpi_reply->ExtPageLength;
-		mpi_request->ExtPageType = mpi_reply->ExtPageType;
-		if (mpi_request->Header.PageLength)
-			mem.sz = mpi_request->Header.PageLength * 4;
-		else
-			mem.sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4;
-		r = _config_alloc_config_dma_memory(ioc, &mem);
-		if (r != 0)
-			goto out;
-		if (mpi_request->Action ==
-		    MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT ||
-		    mpi_request->Action ==
-		    MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) {
-			ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
-			    MPT2_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz,
-			    mem.page_dma);
-			memcpy(mem.page, config_page, min_t(u16, mem.sz,
-			    config_page_sz));
-		} else {
-			memset(config_page, 0, config_page_sz);
-			ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
-			    MPT2_CONFIG_COMMON_SGLFLAGS | mem.sz, mem.page_dma);
-		}
-	}
-
- retry_config:
-	if (retry_count) {
-		if (retry_count > 2) { /* attempt only 2 retries */
-			r = -EFAULT;
-			goto free_mem;
-		}
-		printk(MPT2SAS_INFO_FMT "%s: attempting retry (%d)\n",
-		    ioc->name, __func__, retry_count);
-	}
-	wait_state_count = 0;
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT) {
-			printk(MPT2SAS_ERR_FMT
-			    "%s: failed due to ioc not operational\n",
-			    ioc->name, __func__);
-			ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-			r = -EFAULT;
-			goto free_mem;
-		}
-		ssleep(1);
-		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-		printk(MPT2SAS_INFO_FMT "%s: waiting for "
-		    "operational state(count=%d)\n", ioc->name,
-		    __func__, wait_state_count);
-	}
-	if (wait_state_count)
-		printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
-		    ioc->name, __func__);
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->config_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-		r = -EAGAIN;
-		goto free_mem;
-	}
-
-	r = 0;
-	memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t));
-	ioc->config_cmds.status = MPT2_CMD_PENDING;
-	config_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->config_cmds.smid = smid;
-	memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	_config_display_some_debug(ioc, smid, "config_request", NULL);
-#endif
-	init_completion(&ioc->config_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
-	    timeout*HZ);
-	if (!(ioc->config_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
-		    ioc->name, __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2ConfigRequest_t)/4);
-		retry_count++;
-		if (ioc->config_cmds.smid == smid)
-			mpt2sas_base_free_smid(ioc, smid);
-		if ((ioc->shost_recovery) || (ioc->config_cmds.status &
-		    MPT2_CMD_RESET) || ioc->pci_error_recovery)
-			goto retry_config;
-		issue_host_reset = 1;
-		r = -EFAULT;
-		goto free_mem;
-	}
-
-	if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID)
-		memcpy(mpi_reply, ioc->config_cmds.reply,
-		    sizeof(Mpi2ConfigReply_t));
-	if (retry_count)
-		printk(MPT2SAS_INFO_FMT "%s: retry (%d) completed!!\n",
-		    ioc->name, __func__, retry_count);
-	if (config_page && mpi_request->Action ==
-	    MPI2_CONFIG_ACTION_PAGE_READ_CURRENT)
-		memcpy(config_page, mem.page, min_t(u16, mem.sz,
-		    config_page_sz));
- free_mem:
-	if (config_page)
-		_config_free_config_dma_memory(ioc, &mem);
- out:
-	ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-	mutex_unlock(&ioc->config_cmds.mutex);
-
-	if (issue_host_reset)
-		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-	return r;
-}
-
-/**
- * mpt2sas_config_get_manufacturing_pg0 - obtain manufacturing page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
-	mpi_request.Header.PageNumber = 0;
-	mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_manufacturing_pg10 - obtain manufacturing page 10
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_manufacturing_pg10(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage10_t *config_page)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
-	mpi_request.Header.PageNumber = 10;
-	mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_bios_pg2 - obtain bios page 2
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
-	mpi_request.Header.PageNumber = 2;
-	mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_bios_pg3 - obtain bios page 3
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2BiosPage3_t *config_page)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
-	mpi_request.Header.PageNumber = 3;
-	mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_iounit_pg0 - obtain iounit page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
-	mpi_request.Header.PageNumber = 0;
-	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_iounit_pg1 - obtain iounit page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
-	mpi_request.Header.PageNumber = 1;
-	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_set_iounit_pg1 - set iounit page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
-	mpi_request.Header.PageNumber = 1;
-	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_iounit_pg3 - obtain iounit page 3
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @sz: size of buffer passed in config_page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
-	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
-	mpi_request.Header.PageNumber = 3;
-	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE3_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_iounit_pg8 - obtain iounit page 8
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
-	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
-	mpi_request.Header.PageNumber = 8;
-	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_ioc_pg8 - obtain ioc page 8
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
-	mpi_request.Header.PageNumber = 8;
-	mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_sas_device_pg0 - obtain sas device page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: device handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
-	mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
-	mpi_request.Header.PageNumber = 0;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.PageAddress = cpu_to_le32(form | handle);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_sas_device_pg1 - obtain sas device page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: device handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
-	mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION;
-	mpi_request.Header.PageNumber = 1;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.PageAddress = cpu_to_le32(form | handle);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_number_hba_phys - obtain number of phys on the host
- * @ioc: per adapter object
- * @num_phys: pointer returned with the number of phys
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-	u16 ioc_status;
-	Mpi2ConfigReply_t mpi_reply;
-	Mpi2SasIOUnitPage0_t config_page;
-
-	*num_phys = 0;
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
-	mpi_request.Header.PageNumber = 0;
-	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, &mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, &mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
-	    sizeof(Mpi2SasIOUnitPage0_t));
-	if (!r) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
-			*num_phys = config_page.NumPhys;
-	}
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @sz: size of buffer passed in config_page
- * Context: sleep.
- *
- * Calling function should call config_get_number_hba_phys prior to
- * this function, so enough memory is allocated for config_page.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
-	mpi_request.Header.PageNumber = 0;
-	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @sz: size of buffer passed in config_page
- * Context: sleep.
- *
- * Calling function should call config_get_number_hba_phys prior to
- * this function, so enough memory is allocated for config_page.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
-	mpi_request.Header.PageNumber = 1;
-	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_set_sas_iounit_pg1 - send sas iounit page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @sz: size of buffer passed in config_page
- * Context: sleep.
- *
- * Calling function should call config_get_number_hba_phys prior to
- * this function, so enough memory is allocated for config_page.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
-	mpi_request.Header.PageNumber = 1;
-	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
-	_config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_expander_pg0 - obtain expander page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: expander handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
-	mpi_request.Header.PageNumber = 0;
-	mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.PageAddress = cpu_to_le32(form | handle);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_expander_pg1 - obtain expander page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @phy_number: phy number
- * @handle: expander handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number,
-    u16 handle)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
-	mpi_request.Header.PageNumber = 1;
-	mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.PageAddress =
-	    cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM |
-	    (phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_enclosure_pg0 - obtain enclosure page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: expander handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE;
-	mpi_request.Header.PageNumber = 0;
-	mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.PageAddress = cpu_to_le32(form | handle);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_phy_pg0 - obtain phy page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @phy_number: phy number
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
-	mpi_request.Header.PageNumber = 0;
-	mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.PageAddress =
-	    cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_phy_pg1 - obtain phy page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @phy_number: phy number
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
-	mpi_request.Header.PageNumber = 1;
-	mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.PageAddress =
-	    cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_raid_volume_pg1 - obtain raid volume page 1
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: volume handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
-    u32 handle)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
-	mpi_request.Header.PageNumber = 1;
-	mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.PageAddress = cpu_to_le32(form | handle);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_number_pds - obtain number of phys disk assigned to volume
- * @ioc: per adapter object
- * @handle: volume handle
- * @num_pds: returns pds count
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle,
-    u8 *num_pds)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	Mpi2RaidVolPage0_t config_page;
-	Mpi2ConfigReply_t mpi_reply;
-	int r;
-	u16 ioc_status;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	*num_pds = 0;
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
-	mpi_request.Header.PageNumber = 0;
-	mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, &mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.PageAddress =
-	    cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, &mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
-	    sizeof(Mpi2RaidVolPage0_t));
-	if (!r) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
-			*num_pds = config_page.NumPhysDisks;
-	}
-
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_raid_volume_pg0 - obtain raid volume page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_HANDLE or HANDLE
- * @handle: volume handle
- * @sz: size of buffer passed in config_page
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
-    u32 handle, u16 sz)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
-	mpi_request.Header.PageNumber = 0;
-	mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.PageAddress = cpu_to_le32(form | handle);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_phys_disk_pg0 - obtain phys disk page 0
- * @ioc: per adapter object
- * @mpi_reply: reply mf payload returned from firmware
- * @config_page: contents of the config page
- * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE
- * @form_specific: specific to the form
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
-    *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
-    u32 form_specific)
-{
-	Mpi2ConfigRequest_t mpi_request;
-	int r;
-
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
-	mpi_request.Header.PageNumber = 0;
-	mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.PageAddress = cpu_to_le32(form | form_specific);
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
- out:
-	return r;
-}
-
-/**
- * mpt2sas_config_get_volume_handle - returns volume handle for give hidden raid components
- * @ioc: per adapter object
- * @pd_handle: phys disk handle
- * @volume_handle: volume handle
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
-    u16 *volume_handle)
-{
-	Mpi2RaidConfigurationPage0_t *config_page = NULL;
-	Mpi2ConfigRequest_t mpi_request;
-	Mpi2ConfigReply_t mpi_reply;
-	int r, i, config_page_sz;
-	u16 ioc_status;
-	int config_num;
-	u16 element_type;
-	u16 phys_disk_dev_handle;
-
-	*volume_handle = 0;
-	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_CONFIG;
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
-	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
-	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG;
-	mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION;
-	mpi_request.Header.PageNumber = 0;
-	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
-	r = _config_request(ioc, &mpi_request, &mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
-	if (r)
-		goto out;
-
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
-	config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
-	config_page = kmalloc(config_page_sz, GFP_KERNEL);
-	if (!config_page) {
-		r = -1;
-		goto out;
-	}
-	config_num = 0xff;
-	while (1) {
-		mpi_request.PageAddress = cpu_to_le32(config_num +
-		    MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
-		r = _config_request(ioc, &mpi_request, &mpi_reply,
-		    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-		    config_page_sz);
-		if (r)
-			goto out;
-		r = -1;
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
-			goto out;
-		for (i = 0; i < config_page->NumElements; i++) {
-			element_type = le16_to_cpu(config_page->
-			    ConfigElement[i].ElementFlags) &
-			    MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
-			if (element_type ==
-			    MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
-			    element_type ==
-			    MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
-				phys_disk_dev_handle =
-				    le16_to_cpu(config_page->ConfigElement[i].
-				    PhysDiskDevHandle);
-				if (phys_disk_dev_handle == pd_handle) {
-					*volume_handle =
-					    le16_to_cpu(config_page->
-					    ConfigElement[i].VolDevHandle);
-					r = 0;
-					goto out;
-				}
-			} else if (element_type ==
-			    MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
-				*volume_handle = 0;
-				r = 0;
-				goto out;
-			}
-		}
-		config_num = config_page->ConfigNum;
-	}
- out:
-	kfree(config_page);
-	return r;
-}
-
-/**
- * mpt2sas_config_get_volume_wwid - returns wwid given the volume handle
- * @ioc: per adapter object
- * @volume_handle: volume handle
- * @wwid: volume wwid
- * Context: sleep.
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle,
-    u64 *wwid)
-{
-	Mpi2ConfigReply_t mpi_reply;
-	Mpi2RaidVolPage1_t raid_vol_pg1;
-
-	*wwid = 0;
-	if (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
-	    &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE,
-	    volume_handle))) {
-		*wwid = le64_to_cpu(raid_vol_pg1.WWID);
-		return 0;
-	} else
-		return -1;
-}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
deleted file mode 100644
index 3694b63bd..000000000
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ /dev/null
@@ -1,3101 +0,0 @@
-/*
- * Management Module Support for MPT (Message Passing Technology) based
- * controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c
- * Copyright (C) 2007-2014  LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
- * USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/compat.h>
-#include <linux/poll.h>
-
-#include <linux/io.h>
-#include <linux/uaccess.h>
-
-#include "mpt2sas_base.h"
-#include "mpt2sas_ctl.h"
-
-static DEFINE_MUTEX(_ctl_mutex);
-static struct fasync_struct *async_queue;
-static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
-
-static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type,
-    u8 *issue_reset);
-
-/**
- * enum block_state - blocking state
- * @NON_BLOCKING: non blocking
- * @BLOCKING: blocking
- *
- * These states are for ioctls that need to wait for a response
- * from firmware, so they probably require sleep.
- */
-enum block_state {
-	NON_BLOCKING,
-	BLOCKING,
-};
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _ctl_sas_device_find_by_handle - sas device search
- * @ioc: per adapter object
- * @handle: sas device handle (assigned by firmware)
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for sas_device based on sas_address, then return sas_device
- * object.
- */
-static struct _sas_device *
-_ctl_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct _sas_device *sas_device, *r;
-
-	r = NULL;
-	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
-		if (sas_device->handle != handle)
-			continue;
-		r = sas_device;
-		goto out;
-	}
-
- out:
-	return r;
-}
-
-/**
- * _ctl_display_some_debug - debug routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @calling_function_name: string pass from calling function
- * @mpi_reply: reply message frame
- * Context: none.
- *
- * Function for displaying debug info helpful when debugging issues
- * in this module.
- */
-static void
-_ctl_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-    char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
-{
-	Mpi2ConfigRequest_t *mpi_request;
-	char *desc = NULL;
-
-	if (!(ioc->logging_level & MPT_DEBUG_IOCTL))
-		return;
-
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	switch (mpi_request->Function) {
-	case MPI2_FUNCTION_SCSI_IO_REQUEST:
-	{
-		Mpi2SCSIIORequest_t *scsi_request =
-		    (Mpi2SCSIIORequest_t *)mpi_request;
-
-		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
-		    "scsi_io, cmd(0x%02x), cdb_len(%d)",
-		    scsi_request->CDB.CDB32[0],
-		    le16_to_cpu(scsi_request->IoFlags) & 0xF);
-		desc = ioc->tmp_string;
-		break;
-	}
-	case MPI2_FUNCTION_SCSI_TASK_MGMT:
-		desc = "task_mgmt";
-		break;
-	case MPI2_FUNCTION_IOC_INIT:
-		desc = "ioc_init";
-		break;
-	case MPI2_FUNCTION_IOC_FACTS:
-		desc = "ioc_facts";
-		break;
-	case MPI2_FUNCTION_CONFIG:
-	{
-		Mpi2ConfigRequest_t *config_request =
-		    (Mpi2ConfigRequest_t *)mpi_request;
-
-		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
-		    "config, type(0x%02x), ext_type(0x%02x), number(%d)",
-		    (config_request->Header.PageType &
-		     MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType,
-		    config_request->Header.PageNumber);
-		desc = ioc->tmp_string;
-		break;
-	}
-	case MPI2_FUNCTION_PORT_FACTS:
-		desc = "port_facts";
-		break;
-	case MPI2_FUNCTION_PORT_ENABLE:
-		desc = "port_enable";
-		break;
-	case MPI2_FUNCTION_EVENT_NOTIFICATION:
-		desc = "event_notification";
-		break;
-	case MPI2_FUNCTION_FW_DOWNLOAD:
-		desc = "fw_download";
-		break;
-	case MPI2_FUNCTION_FW_UPLOAD:
-		desc = "fw_upload";
-		break;
-	case MPI2_FUNCTION_RAID_ACTION:
-		desc = "raid_action";
-		break;
-	case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
-	{
-		Mpi2SCSIIORequest_t *scsi_request =
-		    (Mpi2SCSIIORequest_t *)mpi_request;
-
-		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
-		    "raid_pass, cmd(0x%02x), cdb_len(%d)",
-		    scsi_request->CDB.CDB32[0],
-		    le16_to_cpu(scsi_request->IoFlags) & 0xF);
-		desc = ioc->tmp_string;
-		break;
-	}
-	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
-		desc = "sas_iounit_cntl";
-		break;
-	case MPI2_FUNCTION_SATA_PASSTHROUGH:
-		desc = "sata_pass";
-		break;
-	case MPI2_FUNCTION_DIAG_BUFFER_POST:
-		desc = "diag_buffer_post";
-		break;
-	case MPI2_FUNCTION_DIAG_RELEASE:
-		desc = "diag_release";
-		break;
-	case MPI2_FUNCTION_SMP_PASSTHROUGH:
-		desc = "smp_passthrough";
-		break;
-	}
-
-	if (!desc)
-		return;
-
-	printk(MPT2SAS_INFO_FMT "%s: %s, smid(%d)\n",
-	    ioc->name, calling_function_name, desc, smid);
-
-	if (!mpi_reply)
-		return;
-
-	if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
-		printk(MPT2SAS_INFO_FMT
-		    "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
-		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
-		    le32_to_cpu(mpi_reply->IOCLogInfo));
-
-	if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
-	    mpi_request->Function ==
-	    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
-		Mpi2SCSIIOReply_t *scsi_reply =
-		    (Mpi2SCSIIOReply_t *)mpi_reply;
-		struct _sas_device *sas_device = NULL;
-		unsigned long flags;
-
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = _ctl_sas_device_find_by_handle(ioc,
-		    le16_to_cpu(scsi_reply->DevHandle));
-		if (sas_device) {
-			printk(MPT2SAS_WARN_FMT "\tsas_address(0x%016llx), "
-			    "phy(%d)\n", ioc->name, (unsigned long long)
-			    sas_device->sas_address, sas_device->phy);
-			printk(MPT2SAS_WARN_FMT
-			    "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
-			    ioc->name, sas_device->enclosure_logical_id,
-			    sas_device->slot);
-		}
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
-			printk(MPT2SAS_INFO_FMT
-			    "\tscsi_state(0x%02x), scsi_status"
-			    "(0x%02x)\n", ioc->name,
-			    scsi_reply->SCSIState,
-			    scsi_reply->SCSIStatus);
-	}
-}
-#endif
-
-/**
- * mpt2sas_ctl_done - ctl module completion routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: none.
- *
- * The callback handler when using ioc->ctl_cb_idx.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-u8
-mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-	u32 reply)
-{
-	MPI2DefaultReply_t *mpi_reply;
-	Mpi2SCSIIOReply_t *scsiio_reply;
-	const void *sense_data;
-	u32 sz;
-
-	if (ioc->ctl_cmds.status == MPT2_CMD_NOT_USED)
-		return 1;
-	if (ioc->ctl_cmds.smid != smid)
-		return 1;
-	ioc->ctl_cmds.status |= MPT2_CMD_COMPLETE;
-	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (mpi_reply) {
-		memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
-		ioc->ctl_cmds.status |= MPT2_CMD_REPLY_VALID;
-		/* get sense data */
-		if (mpi_reply->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
-		    mpi_reply->Function ==
-		    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
-			scsiio_reply = (Mpi2SCSIIOReply_t *)mpi_reply;
-			if (scsiio_reply->SCSIState &
-			    MPI2_SCSI_STATE_AUTOSENSE_VALID) {
-				sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
-				    le32_to_cpu(scsiio_reply->SenseCount));
-				sense_data = mpt2sas_base_get_sense_buffer(ioc,
-				    smid);
-				memcpy(ioc->ctl_cmds.sense, sense_data, sz);
-			}
-		}
-	}
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
-#endif
-	ioc->ctl_cmds.status &= ~MPT2_CMD_PENDING;
-	complete(&ioc->ctl_cmds.done);
-	return 1;
-}
-
-/**
- * _ctl_check_event_type - determines when an event needs logging
- * @ioc: per adapter object
- * @event: firmware event
- *
- * The bitmask in ioc->event_type[] indicates which events should be
- * be saved in the driver event_log.  This bitmask is set by application.
- *
- * Returns 1 when event should be captured, or zero means no match.
- */
-static int
-_ctl_check_event_type(struct MPT2SAS_ADAPTER *ioc, u16 event)
-{
-	u16 i;
-	u32 desired_event;
-
-	if (event >= 128 || !event || !ioc->event_log)
-		return 0;
-
-	desired_event = (1 << (event % 32));
-	if (!desired_event)
-		desired_event = 1;
-	i = event / 32;
-	return desired_event & ioc->event_type[i];
-}
-
-/**
- * mpt2sas_ctl_add_to_event_log - add event
- * @ioc: per adapter object
- * @mpi_reply: reply message frame
- *
- * Return nothing.
- */
-void
-mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventNotificationReply_t *mpi_reply)
-{
-	struct MPT2_IOCTL_EVENTS *event_log;
-	u16 event;
-	int i;
-	u32 sz, event_data_sz;
-	u8 send_aen = 0;
-
-	if (!ioc->event_log)
-		return;
-
-	event = le16_to_cpu(mpi_reply->Event);
-
-	if (_ctl_check_event_type(ioc, event)) {
-
-		/* insert entry into circular event_log */
-		i = ioc->event_context % MPT2SAS_CTL_EVENT_LOG_SIZE;
-		event_log = ioc->event_log;
-		event_log[i].event = event;
-		event_log[i].context = ioc->event_context++;
-
-		event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4;
-		sz = min_t(u32, event_data_sz, MPT2_EVENT_DATA_SIZE);
-		memset(event_log[i].data, 0, MPT2_EVENT_DATA_SIZE);
-		memcpy(event_log[i].data, mpi_reply->EventData, sz);
-		send_aen = 1;
-	}
-
-	/* This aen_event_read_flag flag is set until the
-	 * application has read the event log.
-	 * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify.
-	 */
-	if (event == MPI2_EVENT_LOG_ENTRY_ADDED ||
-	    (send_aen && !ioc->aen_event_read_flag)) {
-		ioc->aen_event_read_flag = 1;
-		wake_up_interruptible(&ctl_poll_wait);
-		if (async_queue)
-			kill_fasync(&async_queue, SIGIO, POLL_IN);
-	}
-}
-
-/**
- * mpt2sas_ctl_event_callback - firmware event handler (called at ISR time)
- * @ioc: per adapter object
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: interrupt.
- *
- * This function merely adds a new work task into ioc->firmware_event_thread.
- * The tasks are worked from _firmware_event_work in user context.
- *
- * Returns void.
- */
-void
-mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
-	u32 reply)
-{
-	Mpi2EventNotificationReply_t *mpi_reply;
-
-	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (unlikely(!mpi_reply)) {
-		printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
-	}
-	mpt2sas_ctl_add_to_event_log(ioc, mpi_reply);
-	return;
-}
-
-/**
- * _ctl_verify_adapter - validates ioc_number passed from application
- * @ioc: per adapter object
- * @iocpp: The ioc pointer is returned in this.
- *
- * Return (-1) means error, else ioc_number.
- */
-static int
-_ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp)
-{
-	struct MPT2SAS_ADAPTER *ioc;
-	/* global ioc lock to protect controller on list operations */
-	spin_lock(&gioc_lock);
-	list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
-		if (ioc->id != ioc_number)
-			continue;
-		spin_unlock(&gioc_lock);
-		*iocpp = ioc;
-		return ioc_number;
-	}
-	spin_unlock(&gioc_lock);
-	*iocpp = NULL;
-	return -1;
-}
-
-/**
- * mpt2sas_ctl_reset_handler - reset callback handler (for ctl)
- * @ioc: per adapter object
- * @reset_phase: phase
- *
- * The handler for doing any required cleanup or initialization.
- *
- * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
- * MPT2_IOC_DONE_RESET
- */
-void
-mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
-{
-	int i;
-	u8 issue_reset;
-
-	switch (reset_phase) {
-	case MPT2_IOC_PRE_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
-		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
-			if (!(ioc->diag_buffer_status[i] &
-			    MPT2_DIAG_BUFFER_IS_REGISTERED))
-				continue;
-			if ((ioc->diag_buffer_status[i] &
-			    MPT2_DIAG_BUFFER_IS_RELEASED))
-				continue;
-			_ctl_send_release(ioc, i, &issue_reset);
-		}
-		break;
-	case MPT2_IOC_AFTER_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
-		if (ioc->ctl_cmds.status & MPT2_CMD_PENDING) {
-			ioc->ctl_cmds.status |= MPT2_CMD_RESET;
-			mpt2sas_base_free_smid(ioc, ioc->ctl_cmds.smid);
-			complete(&ioc->ctl_cmds.done);
-		}
-		break;
-	case MPT2_IOC_DONE_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
-
-		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
-			if (!(ioc->diag_buffer_status[i] &
-			    MPT2_DIAG_BUFFER_IS_REGISTERED))
-				continue;
-			if ((ioc->diag_buffer_status[i] &
-			    MPT2_DIAG_BUFFER_IS_RELEASED))
-				continue;
-			ioc->diag_buffer_status[i] |=
-			    MPT2_DIAG_BUFFER_IS_DIAG_RESET;
-		}
-		break;
-	}
-}
-
-/**
- * _ctl_fasync -
- * @fd -
- * @filep -
- * @mode -
- *
- * Called when application request fasyn callback handler.
- */
-static int
-_ctl_fasync(int fd, struct file *filep, int mode)
-{
-	return fasync_helper(fd, filep, mode, &async_queue);
-}
-
-/**
- * _ctl_poll -
- * @file -
- * @wait -
- *
- */
-static unsigned int
-_ctl_poll(struct file *filep, poll_table *wait)
-{
-	struct MPT2SAS_ADAPTER *ioc;
-
-	poll_wait(filep, &ctl_poll_wait, wait);
-
-	/* global ioc lock to protect controller on list operations */
-	spin_lock(&gioc_lock);
-	list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
-		if (ioc->aen_event_read_flag) {
-			spin_unlock(&gioc_lock);
-			return POLLIN | POLLRDNORM;
-		}
-	}
-	spin_unlock(&gioc_lock);
-	return 0;
-}
-
-/**
- * _ctl_set_task_mid - assign an active smid to tm request
- * @ioc: per adapter object
- * @karg - (struct mpt2_ioctl_command)
- * @tm_request - pointer to mf from user space
- *
- * Returns 0 when an smid if found, else fail.
- * during failure, the reply frame is filled.
- */
-static int
-_ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
-    Mpi2SCSITaskManagementRequest_t *tm_request)
-{
-	u8 found = 0;
-	u16 i;
-	u16 handle;
-	struct scsi_cmnd *scmd;
-	struct MPT2SAS_DEVICE *priv_data;
-	unsigned long flags;
-	Mpi2SCSITaskManagementReply_t *tm_reply;
-	u32 sz;
-	u32 lun;
-	char *desc = NULL;
-
-	if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
-		desc = "abort_task";
-	else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
-		desc = "query_task";
-	else
-		return 0;
-
-	lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
-
-	handle = le16_to_cpu(tm_request->DevHandle);
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	for (i = ioc->scsiio_depth; i && !found; i--) {
-		scmd = ioc->scsi_lookup[i - 1].scmd;
-		if (scmd == NULL || scmd->device == NULL ||
-		    scmd->device->hostdata == NULL)
-			continue;
-		if (lun != scmd->device->lun)
-			continue;
-		priv_data = scmd->device->hostdata;
-		if (priv_data->sas_target == NULL)
-			continue;
-		if (priv_data->sas_target->handle != handle)
-			continue;
-		tm_request->TaskMID = cpu_to_le16(ioc->scsi_lookup[i - 1].smid);
-		found = 1;
-	}
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-
-	if (!found) {
-		dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "handle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
-		    desc, le16_to_cpu(tm_request->DevHandle), lun));
-		tm_reply = ioc->ctl_cmds.reply;
-		tm_reply->DevHandle = tm_request->DevHandle;
-		tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
-		tm_reply->TaskType = tm_request->TaskType;
-		tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
-		tm_reply->VP_ID = tm_request->VP_ID;
-		tm_reply->VF_ID = tm_request->VF_ID;
-		sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz);
-		if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply,
-		    sz))
-			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
-			    __LINE__, __func__);
-		return 1;
-	}
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-	    "handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name,
-	    desc, le16_to_cpu(tm_request->DevHandle), lun,
-	     le16_to_cpu(tm_request->TaskMID)));
-	return 0;
-}
-
-/**
- * _ctl_do_mpt_command - main handler for MPT2COMMAND opcode
- * @ioc: per adapter object
- * @karg - (struct mpt2_ioctl_command)
- * @mf - pointer to mf in user space
- */
-static long
-_ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command karg,
-	void __user *mf)
-{
-	MPI2RequestHeader_t *mpi_request = NULL, *request;
-	MPI2DefaultReply_t *mpi_reply;
-	u32 ioc_state;
-	u16 ioc_status;
-	u16 smid;
-	unsigned long timeout, timeleft;
-	u8 issue_reset;
-	u32 sz;
-	void *psge;
-	void *data_out = NULL;
-	dma_addr_t data_out_dma;
-	size_t data_out_sz = 0;
-	void *data_in = NULL;
-	dma_addr_t data_in_dma;
-	size_t data_in_sz = 0;
-	u32 sgl_flags;
-	long ret;
-	u16 wait_state_count;
-
-	issue_reset = 0;
-
-	if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
-		    ioc->name, __func__);
-		ret = -EAGAIN;
-		goto out;
-	}
-
-	wait_state_count = 0;
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			printk(MPT2SAS_ERR_FMT
-			    "%s: failed due to ioc not operational\n",
-			    ioc->name, __func__);
-			ret = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-		printk(MPT2SAS_INFO_FMT "%s: waiting for "
-		    "operational state(count=%d)\n", ioc->name,
-		    __func__, wait_state_count);
-	}
-	if (wait_state_count)
-		printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
-		    ioc->name, __func__);
-
-	mpi_request = kzalloc(ioc->request_sz, GFP_KERNEL);
-	if (!mpi_request) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a memory for "
-		    "mpi_request\n", ioc->name, __func__);
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/* Check for overflow and wraparound */
-	if (karg.data_sge_offset * 4 > ioc->request_sz ||
-	    karg.data_sge_offset > (UINT_MAX / 4)) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* copy in request message frame from user */
-	if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__,
-		    __func__);
-		ret = -EFAULT;
-		goto out;
-	}
-
-	if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
-		smid = mpt2sas_base_get_smid_hpr(ioc, ioc->ctl_cb_idx);
-		if (!smid) {
-			printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-			    ioc->name, __func__);
-			ret = -EAGAIN;
-			goto out;
-		}
-	} else {
-
-		smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->ctl_cb_idx, NULL);
-		if (!smid) {
-			printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-			    ioc->name, __func__);
-			ret = -EAGAIN;
-			goto out;
-		}
-	}
-
-	ret = 0;
-	ioc->ctl_cmds.status = MPT2_CMD_PENDING;
-	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
-	request = mpt2sas_base_get_msg_frame(ioc, smid);
-	memcpy(request, mpi_request, karg.data_sge_offset*4);
-	ioc->ctl_cmds.smid = smid;
-	data_out_sz = karg.data_out_size;
-	data_in_sz = karg.data_in_size;
-
-	if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
-	    mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
-		if (!le16_to_cpu(mpi_request->FunctionDependent1) ||
-		    le16_to_cpu(mpi_request->FunctionDependent1) >
-		    ioc->facts.MaxDevHandle) {
-			ret = -EINVAL;
-			mpt2sas_base_free_smid(ioc, smid);
-			goto out;
-		}
-	}
-
-	/* obtain dma-able memory for data transfer */
-	if (data_out_sz) /* WRITE */ {
-		data_out = pci_alloc_consistent(ioc->pdev, data_out_sz,
-		    &data_out_dma);
-		if (!data_out) {
-			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
-			    __LINE__, __func__);
-			ret = -ENOMEM;
-			mpt2sas_base_free_smid(ioc, smid);
-			goto out;
-		}
-		if (copy_from_user(data_out, karg.data_out_buf_ptr,
-			data_out_sz)) {
-			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
-			    __LINE__, __func__);
-			ret =  -EFAULT;
-			mpt2sas_base_free_smid(ioc, smid);
-			goto out;
-		}
-	}
-
-	if (data_in_sz) /* READ */ {
-		data_in = pci_alloc_consistent(ioc->pdev, data_in_sz,
-		    &data_in_dma);
-		if (!data_in) {
-			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
-			    __LINE__, __func__);
-			ret = -ENOMEM;
-			mpt2sas_base_free_smid(ioc, smid);
-			goto out;
-		}
-	}
-
-	/* add scatter gather elements */
-	psge = (void *)request + (karg.data_sge_offset*4);
-
-	if (!data_out_sz && !data_in_sz) {
-		mpt2sas_base_build_zero_len_sge(ioc, psge);
-	} else if (data_out_sz && data_in_sz) {
-		/* WRITE sgel first */
-		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-		    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
-		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-		ioc->base_add_sg_single(psge, sgl_flags |
-		    data_out_sz, data_out_dma);
-
-		/* incr sgel */
-		psge += ioc->sge_size;
-
-		/* READ sgel last */
-		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
-		    MPI2_SGE_FLAGS_END_OF_LIST);
-		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-		ioc->base_add_sg_single(psge, sgl_flags |
-		    data_in_sz, data_in_dma);
-	} else if (data_out_sz) /* WRITE */ {
-		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
-		    MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC);
-		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-		ioc->base_add_sg_single(psge, sgl_flags |
-		    data_out_sz, data_out_dma);
-	} else if (data_in_sz) /* READ */ {
-		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
-		    MPI2_SGE_FLAGS_END_OF_LIST);
-		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-		ioc->base_add_sg_single(psge, sgl_flags |
-		    data_in_sz, data_in_dma);
-	}
-
-	/* send command to firmware */
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	_ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
-#endif
-
-	init_completion(&ioc->ctl_cmds.done);
-	switch (mpi_request->Function) {
-	case MPI2_FUNCTION_SCSI_IO_REQUEST:
-	case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
-	{
-		Mpi2SCSIIORequest_t *scsiio_request =
-		    (Mpi2SCSIIORequest_t *)request;
-		scsiio_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
-		scsiio_request->SenseBufferLowAddress =
-		    mpt2sas_base_get_sense_buffer_dma(ioc, smid);
-		memset(ioc->ctl_cmds.sense, 0, SCSI_SENSE_BUFFERSIZE);
-		if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)
-			mpt2sas_base_put_smid_scsi_io(ioc, smid,
-			    le16_to_cpu(mpi_request->FunctionDependent1));
-		else
-			mpt2sas_base_put_smid_default(ioc, smid);
-		break;
-	}
-	case MPI2_FUNCTION_SCSI_TASK_MGMT:
-	{
-		Mpi2SCSITaskManagementRequest_t *tm_request =
-		    (Mpi2SCSITaskManagementRequest_t *)request;
-
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "TASK_MGMT: "
-		    "handle(0x%04x), task_type(0x%02x)\n", ioc->name,
-		    le16_to_cpu(tm_request->DevHandle), tm_request->TaskType));
-
-		if (tm_request->TaskType ==
-		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
-		    tm_request->TaskType ==
-		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
-			if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
-				mpt2sas_base_free_smid(ioc, smid);
-				goto out;
-			}
-		}
-
-		mpt2sas_scsih_set_tm_flag(ioc, le16_to_cpu(
-		    tm_request->DevHandle));
-		mpt2sas_base_put_smid_hi_priority(ioc, smid);
-		break;
-	}
-	case MPI2_FUNCTION_SMP_PASSTHROUGH:
-	{
-		Mpi2SmpPassthroughRequest_t *smp_request =
-		    (Mpi2SmpPassthroughRequest_t *)mpi_request;
-		u8 *data;
-
-		/* ioc determines which port to use */
-		smp_request->PhysicalPort = 0xFF;
-		if (smp_request->PassthroughFlags &
-		    MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE)
-			data = (u8 *)&smp_request->SGL;
-		else {
-			if (unlikely(data_out == NULL)) {
-				printk(KERN_ERR "failure at %s:%d/%s()!\n",
-				    __FILE__, __LINE__, __func__);
-				mpt2sas_base_free_smid(ioc, smid);
-				ret = -EINVAL;
-				goto out;
-			}
-			data = data_out;
-		}
-
-		if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) {
-			ioc->ioc_link_reset_in_progress = 1;
-			ioc->ignore_loginfos = 1;
-		}
-		mpt2sas_base_put_smid_default(ioc, smid);
-		break;
-	}
-	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
-	{
-		Mpi2SasIoUnitControlRequest_t *sasiounit_request =
-		    (Mpi2SasIoUnitControlRequest_t *)mpi_request;
-
-		if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET
-		    || sasiounit_request->Operation ==
-		    MPI2_SAS_OP_PHY_LINK_RESET) {
-			ioc->ioc_link_reset_in_progress = 1;
-			ioc->ignore_loginfos = 1;
-		}
-		mpt2sas_base_put_smid_default(ioc, smid);
-		break;
-	}
-	default:
-		mpt2sas_base_put_smid_default(ioc, smid);
-		break;
-	}
-
-	if (karg.timeout < MPT2_IOCTL_DEFAULT_TIMEOUT)
-		timeout = MPT2_IOCTL_DEFAULT_TIMEOUT;
-	else
-		timeout = karg.timeout;
-	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
-	    timeout*HZ);
-	if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
-		Mpi2SCSITaskManagementRequest_t *tm_request =
-		    (Mpi2SCSITaskManagementRequest_t *)mpi_request;
-		mpt2sas_scsih_clear_tm_flag(ioc, le16_to_cpu(
-		    tm_request->DevHandle));
-	} else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH ||
-	    mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) &&
-		ioc->ioc_link_reset_in_progress) {
-		ioc->ioc_link_reset_in_progress = 0;
-		ioc->ignore_loginfos = 0;
-	}
-	if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
-		    __func__);
-		_debug_dump_mf(mpi_request, karg.data_sge_offset);
-		if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
-		goto issue_host_reset;
-	}
-
-	mpi_reply = ioc->ctl_cmds.reply;
-	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
-	    (ioc->logging_level & MPT_DEBUG_TM)) {
-		Mpi2SCSITaskManagementReply_t *tm_reply =
-		    (Mpi2SCSITaskManagementReply_t *)mpi_reply;
-
-		printk(MPT2SAS_INFO_FMT "TASK_MGMT: "
-		    "IOCStatus(0x%04x), IOCLogInfo(0x%08x), "
-		    "TerminationCount(0x%08x)\n", ioc->name,
-		    le16_to_cpu(tm_reply->IOCStatus),
-		    le32_to_cpu(tm_reply->IOCLogInfo),
-		    le32_to_cpu(tm_reply->TerminationCount));
-	}
-#endif
-	/* copy out xdata to user */
-	if (data_in_sz) {
-		if (copy_to_user(karg.data_in_buf_ptr, data_in,
-		    data_in_sz)) {
-			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
-			    __LINE__, __func__);
-			ret = -ENODATA;
-			goto out;
-		}
-	}
-
-	/* copy out reply message frame to user */
-	if (karg.max_reply_bytes) {
-		sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz);
-		if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply,
-		    sz)) {
-			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
-			    __LINE__, __func__);
-			ret = -ENODATA;
-			goto out;
-		}
-	}
-
-	/* copy out sense to user */
-	if (karg.max_sense_bytes && (mpi_request->Function ==
-	    MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
-	    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
-		sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE);
-		if (copy_to_user(karg.sense_data_ptr,
-			ioc->ctl_cmds.sense, sz)) {
-			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
-			    __LINE__, __func__);
-			ret = -ENODATA;
-			goto out;
-		}
-	}
-
- issue_host_reset:
-	if (issue_reset) {
-		ret = -ENODATA;
-		if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
-		    mpi_request->Function ==
-		    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
-		    mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH)) {
-			printk(MPT2SAS_INFO_FMT "issue target reset: handle "
-			    "= (0x%04x)\n", ioc->name,
-			    le16_to_cpu(mpi_request->FunctionDependent1));
-			mpt2sas_halt_firmware(ioc);
-			mpt2sas_scsih_issue_tm(ioc,
-			    le16_to_cpu(mpi_request->FunctionDependent1), 0, 0,
-			    0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10,
-			    TM_MUTEX_ON);
-			ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
-		} else
-			mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-			    FORCE_BIG_HAMMER);
-	}
-
- out:
-
-	/* free memory associated with sg buffers */
-	if (data_in)
-		pci_free_consistent(ioc->pdev, data_in_sz, data_in,
-		    data_in_dma);
-
-	if (data_out)
-		pci_free_consistent(ioc->pdev, data_out_sz, data_out,
-		    data_out_dma);
-
-	kfree(mpi_request);
-	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
-	return ret;
-}
-
-/**
- * _ctl_getiocinfo - main handler for MPT2IOCINFO opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_getiocinfo(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
-	struct mpt2_ioctl_iocinfo karg;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
-	    __func__));
-
-	memset(&karg, 0 , sizeof(karg));
-	if (ioc->is_warpdrive)
-		karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
-	else
-		karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
-	if (ioc->pfacts)
-		karg.port_number = ioc->pfacts[0].PortNumber;
-	karg.hw_rev = ioc->pdev->revision;
-	karg.pci_id = ioc->pdev->device;
-	karg.subsystem_device = ioc->pdev->subsystem_device;
-	karg.subsystem_vendor = ioc->pdev->subsystem_vendor;
-	karg.pci_information.u.bits.bus = ioc->pdev->bus->number;
-	karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn);
-	karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
-	karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
-	karg.firmware_version = ioc->facts.FWVersion.Word;
-	strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME);
-	strcat(karg.driver_version, "-");
-	strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
-	karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
-
-	if (copy_to_user(arg, &karg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-	return 0;
-}
-
-/**
- * _ctl_eventquery - main handler for MPT2EVENTQUERY opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_eventquery(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
-	struct mpt2_ioctl_eventquery karg;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
-	    __func__));
-
-	karg.event_entries = MPT2SAS_CTL_EVENT_LOG_SIZE;
-	memcpy(karg.event_types, ioc->event_type,
-	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
-
-	if (copy_to_user(arg, &karg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-	return 0;
-}
-
-/**
- * _ctl_eventenable - main handler for MPT2EVENTENABLE opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_eventenable(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
-	struct mpt2_ioctl_eventenable karg;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
-	    __func__));
-
-	if (ioc->event_log)
-		return 0;
-	memcpy(ioc->event_type, karg.event_types,
-	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
-	mpt2sas_base_validate_event_type(ioc, ioc->event_type);
-
-	/* initialize event_log */
-	ioc->event_context = 0;
-	ioc->aen_event_read_flag = 0;
-	ioc->event_log = kcalloc(MPT2SAS_CTL_EVENT_LOG_SIZE,
-	    sizeof(struct MPT2_IOCTL_EVENTS), GFP_KERNEL);
-	if (!ioc->event_log) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-/**
- * _ctl_eventreport - main handler for MPT2EVENTREPORT opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_eventreport(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
-	struct mpt2_ioctl_eventreport karg;
-	u32 number_bytes, max_events, max;
-	struct mpt2_ioctl_eventreport __user *uarg = arg;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
-	    __func__));
-
-	number_bytes = karg.hdr.max_data_size -
-	    sizeof(struct mpt2_ioctl_header);
-	max_events = number_bytes/sizeof(struct MPT2_IOCTL_EVENTS);
-	max = min_t(u32, MPT2SAS_CTL_EVENT_LOG_SIZE, max_events);
-
-	/* If fewer than 1 event is requested, there must have
-	 * been some type of error.
-	 */
-	if (!max || !ioc->event_log)
-		return -ENODATA;
-
-	number_bytes = max * sizeof(struct MPT2_IOCTL_EVENTS);
-	if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	/* reset flag so SIGIO can restart */
-	ioc->aen_event_read_flag = 0;
-	return 0;
-}
-
-/**
- * _ctl_do_reset - main handler for MPT2HARDRESET opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_do_reset(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
-	struct mpt2_ioctl_diag_reset karg;
-	int retval;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	if (ioc->shost_recovery || ioc->pci_error_recovery ||
-		ioc->is_driver_loading)
-		return -EAGAIN;
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
-	    __func__));
-
-	retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-	    FORCE_BIG_HAMMER);
-	printk(MPT2SAS_INFO_FMT "host reset: %s\n",
-	    ioc->name, ((!retval) ? "SUCCESS" : "FAILED"));
-	return 0;
-}
-
-/**
- * _ctl_btdh_search_sas_device - searching for sas device
- * @ioc: per adapter object
- * @btdh: btdh ioctl payload
- */
-static int
-_ctl_btdh_search_sas_device(struct MPT2SAS_ADAPTER *ioc,
-    struct mpt2_ioctl_btdh_mapping *btdh)
-{
-	struct _sas_device *sas_device;
-	unsigned long flags;
-	int rc = 0;
-
-	if (list_empty(&ioc->sas_device_list))
-		return rc;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
-		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
-		    btdh->handle == sas_device->handle) {
-			btdh->bus = sas_device->channel;
-			btdh->id = sas_device->id;
-			rc = 1;
-			goto out;
-		} else if (btdh->bus == sas_device->channel && btdh->id ==
-		    sas_device->id && btdh->handle == 0xFFFF) {
-			btdh->handle = sas_device->handle;
-			rc = 1;
-			goto out;
-		}
-	}
- out:
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	return rc;
-}
-
-/**
- * _ctl_btdh_search_raid_device - searching for raid device
- * @ioc: per adapter object
- * @btdh: btdh ioctl payload
- */
-static int
-_ctl_btdh_search_raid_device(struct MPT2SAS_ADAPTER *ioc,
-    struct mpt2_ioctl_btdh_mapping *btdh)
-{
-	struct _raid_device *raid_device;
-	unsigned long flags;
-	int rc = 0;
-
-	if (list_empty(&ioc->raid_device_list))
-		return rc;
-
-	spin_lock_irqsave(&ioc->raid_device_lock, flags);
-	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
-		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
-		    btdh->handle == raid_device->handle) {
-			btdh->bus = raid_device->channel;
-			btdh->id = raid_device->id;
-			rc = 1;
-			goto out;
-		} else if (btdh->bus == raid_device->channel && btdh->id ==
-		    raid_device->id && btdh->handle == 0xFFFF) {
-			btdh->handle = raid_device->handle;
-			rc = 1;
-			goto out;
-		}
-	}
- out:
-	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-	return rc;
-}
-
-/**
- * _ctl_btdh_mapping - main handler for MPT2BTDHMAPPING opcode
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_btdh_mapping(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
-	struct mpt2_ioctl_btdh_mapping karg;
-	int rc;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	rc = _ctl_btdh_search_sas_device(ioc, &karg);
-	if (!rc)
-		_ctl_btdh_search_raid_device(ioc, &karg);
-
-	if (copy_to_user(arg, &karg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-	return 0;
-}
-
-/**
- * _ctl_diag_capability - return diag buffer capability
- * @ioc: per adapter object
- * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
- *
- * returns 1 when diag buffer support is enabled in firmware
- */
-static u8
-_ctl_diag_capability(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type)
-{
-	u8 rc = 0;
-
-	switch (buffer_type) {
-	case MPI2_DIAG_BUF_TYPE_TRACE:
-		if (ioc->facts.IOCCapabilities &
-		    MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER)
-			rc = 1;
-		break;
-	case MPI2_DIAG_BUF_TYPE_SNAPSHOT:
-		if (ioc->facts.IOCCapabilities &
-		    MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
-			rc = 1;
-		break;
-	case MPI2_DIAG_BUF_TYPE_EXTENDED:
-		if (ioc->facts.IOCCapabilities &
-		    MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER)
-			rc = 1;
-	}
-
-	return rc;
-}
-
-/**
- * _ctl_diag_register_2 - wrapper for registering diag buffer support
- * @ioc: per adapter object
- * @diag_register: the diag_register struct passed in from user space
- *
- */
-static long
-_ctl_diag_register_2(struct MPT2SAS_ADAPTER *ioc,
-    struct mpt2_diag_register *diag_register)
-{
-	int rc, i;
-	void *request_data = NULL;
-	dma_addr_t request_data_dma;
-	u32 request_data_sz = 0;
-	Mpi2DiagBufferPostRequest_t *mpi_request;
-	Mpi2DiagBufferPostReply_t *mpi_reply;
-	u8 buffer_type;
-	unsigned long timeleft;
-	u16 smid;
-	u16 ioc_status;
-	u8 issue_reset = 0;
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	buffer_type = diag_register->buffer_type;
-	if (!_ctl_diag_capability(ioc, buffer_type)) {
-		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
-		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
-		return -EPERM;
-	}
-
-	if (ioc->diag_buffer_status[buffer_type] &
-	    MPT2_DIAG_BUFFER_IS_REGISTERED) {
-		printk(MPT2SAS_ERR_FMT "%s: already has a registered "
-		    "buffer for buffer_type(0x%02x)\n", ioc->name, __func__,
-		    buffer_type);
-		return -EINVAL;
-	}
-
-	if (diag_register->requested_buffer_size % 4)  {
-		printk(MPT2SAS_ERR_FMT "%s: the requested_buffer_size "
-		    "is not 4 byte aligned\n", ioc->name, __func__);
-		return -EINVAL;
-	}
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	rc = 0;
-	ioc->ctl_cmds.status = MPT2_CMD_PENDING;
-	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->ctl_cmds.smid = smid;
-
-	request_data = ioc->diag_buffer[buffer_type];
-	request_data_sz = diag_register->requested_buffer_size;
-	ioc->unique_id[buffer_type] = diag_register->unique_id;
-	ioc->diag_buffer_status[buffer_type] = 0;
-	memcpy(ioc->product_specific[buffer_type],
-	    diag_register->product_specific, MPT2_PRODUCT_SPECIFIC_DWORDS);
-	ioc->diagnostic_flags[buffer_type] = diag_register->diagnostic_flags;
-
-	if (request_data) {
-		request_data_dma = ioc->diag_buffer_dma[buffer_type];
-		if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) {
-			pci_free_consistent(ioc->pdev,
-			    ioc->diag_buffer_sz[buffer_type],
-			    request_data, request_data_dma);
-			request_data = NULL;
-		}
-	}
-
-	if (request_data == NULL) {
-		ioc->diag_buffer_sz[buffer_type] = 0;
-		ioc->diag_buffer_dma[buffer_type] = 0;
-		request_data = pci_alloc_consistent(
-			ioc->pdev, request_data_sz, &request_data_dma);
-		if (request_data == NULL) {
-			printk(MPT2SAS_ERR_FMT "%s: failed allocating memory"
-			    " for diag buffers, requested size(%d)\n",
-			    ioc->name, __func__, request_data_sz);
-			mpt2sas_base_free_smid(ioc, smid);
-			return -ENOMEM;
-		}
-		ioc->diag_buffer[buffer_type] = request_data;
-		ioc->diag_buffer_sz[buffer_type] = request_data_sz;
-		ioc->diag_buffer_dma[buffer_type] = request_data_dma;
-	}
-
-	mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
-	mpi_request->BufferType = diag_register->buffer_type;
-	mpi_request->Flags = cpu_to_le32(diag_register->diagnostic_flags);
-	mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
-	mpi_request->BufferLength = cpu_to_le32(request_data_sz);
-	mpi_request->VF_ID = 0; /* TODO */
-	mpi_request->VP_ID = 0;
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(0x%p), "
-	    "dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data,
-	    (unsigned long long)request_data_dma,
-	    le32_to_cpu(mpi_request->BufferLength)));
-
-	for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
-		mpi_request->ProductSpecific[i] =
-			cpu_to_le32(ioc->product_specific[buffer_type][i]);
-
-	init_completion(&ioc->ctl_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
-	    MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
-
-	if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
-		    __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2DiagBufferPostRequest_t)/4);
-		if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
-		goto issue_host_reset;
-	}
-
-	/* process the completed Reply Message Frame */
-	if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
-		printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
-		    ioc->name, __func__);
-		rc = -EFAULT;
-		goto out;
-	}
-
-	mpi_reply = ioc->ctl_cmds.reply;
-	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-
-	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
-		ioc->diag_buffer_status[buffer_type] |=
-			MPT2_DIAG_BUFFER_IS_REGISTERED;
-		dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
-		    ioc->name, __func__));
-	} else {
-		printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
-		    "log_info(0x%08x)\n", ioc->name, __func__,
-		    ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
-		rc = -EFAULT;
-	}
-
- issue_host_reset:
-	if (issue_reset)
-		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-
- out:
-
-	if (rc && request_data)
-		pci_free_consistent(ioc->pdev, request_data_sz,
-		    request_data, request_data_dma);
-
-	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
-	return rc;
-}
-
-/**
- * mpt2sas_enable_diag_buffer - enabling diag_buffers support driver load time
- * @ioc: per adapter object
- * @bits_to_register: bitwise field where trace is bit 0, and snapshot is bit 1
- *
- * This is called when command line option diag_buffer_enable is enabled
- * at driver load time.
- */
-void
-mpt2sas_enable_diag_buffer(struct MPT2SAS_ADAPTER *ioc, u8 bits_to_register)
-{
-	struct mpt2_diag_register diag_register;
-
-	memset(&diag_register, 0, sizeof(struct mpt2_diag_register));
-
-	if (bits_to_register & 1) {
-		printk(MPT2SAS_INFO_FMT "registering trace buffer support\n",
-		    ioc->name);
-		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
-		/* register for 1MB buffers  */
-		diag_register.requested_buffer_size = (1024 * 1024);
-		diag_register.unique_id = 0x7075900;
-		_ctl_diag_register_2(ioc,  &diag_register);
-	}
-
-	if (bits_to_register & 2) {
-		printk(MPT2SAS_INFO_FMT "registering snapshot buffer support\n",
-		    ioc->name);
-		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_SNAPSHOT;
-		/* register for 2MB buffers  */
-		diag_register.requested_buffer_size = 2 * (1024 * 1024);
-		diag_register.unique_id = 0x7075901;
-		_ctl_diag_register_2(ioc,  &diag_register);
-	}
-
-	if (bits_to_register & 4) {
-		printk(MPT2SAS_INFO_FMT "registering extended buffer support\n",
-		    ioc->name);
-		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_EXTENDED;
-		/* register for 2MB buffers  */
-		diag_register.requested_buffer_size = 2 * (1024 * 1024);
-		diag_register.unique_id = 0x7075901;
-		_ctl_diag_register_2(ioc,  &diag_register);
-	}
-}
-
-/**
- * _ctl_diag_register - application register with driver
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- *
- * This will allow the driver to setup any required buffers that will be
- * needed by firmware to communicate with the driver.
- */
-static long
-_ctl_diag_register(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
-	struct mpt2_diag_register karg;
-	long rc;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	rc = _ctl_diag_register_2(ioc, &karg);
-	return rc;
-}
-
-/**
- * _ctl_diag_unregister - application unregister with driver
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- *
- * This will allow the driver to cleanup any memory allocated for diag
- * messages and to free up any resources.
- */
-static long
-_ctl_diag_unregister(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
-	struct mpt2_diag_unregister karg;
-	void *request_data;
-	dma_addr_t request_data_dma;
-	u32 request_data_sz;
-	u8 buffer_type;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	buffer_type = karg.unique_id & 0x000000ff;
-	if (!_ctl_diag_capability(ioc, buffer_type)) {
-		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
-		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
-		return -EPERM;
-	}
-
-	if ((ioc->diag_buffer_status[buffer_type] &
-	    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
-		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
-		    "registered\n", ioc->name, __func__, buffer_type);
-		return -EINVAL;
-	}
-	if ((ioc->diag_buffer_status[buffer_type] &
-	    MPT2_DIAG_BUFFER_IS_RELEASED) == 0) {
-		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) has not been "
-		    "released\n", ioc->name, __func__, buffer_type);
-		return -EINVAL;
-	}
-
-	if (karg.unique_id != ioc->unique_id[buffer_type]) {
-		printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
-		    "registered\n", ioc->name, __func__, karg.unique_id);
-		return -EINVAL;
-	}
-
-	request_data = ioc->diag_buffer[buffer_type];
-	if (!request_data) {
-		printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
-		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
-		return -ENOMEM;
-	}
-
-	request_data_sz = ioc->diag_buffer_sz[buffer_type];
-	request_data_dma = ioc->diag_buffer_dma[buffer_type];
-	pci_free_consistent(ioc->pdev, request_data_sz,
-	    request_data, request_data_dma);
-	ioc->diag_buffer[buffer_type] = NULL;
-	ioc->diag_buffer_status[buffer_type] = 0;
-	return 0;
-}
-
-/**
- * _ctl_diag_query - query relevant info associated with diag buffers
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- *
- * The application will send only buffer_type and unique_id.  Driver will
- * inspect unique_id first, if valid, fill in all the info.  If unique_id is
- * 0x00, the driver will return info specified by Buffer Type.
- */
-static long
-_ctl_diag_query(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
-	struct mpt2_diag_query karg;
-	void *request_data;
-	int i;
-	u8 buffer_type;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	karg.application_flags = 0;
-	buffer_type = karg.buffer_type;
-
-	if (!_ctl_diag_capability(ioc, buffer_type)) {
-		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
-		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
-		return -EPERM;
-	}
-
-	if ((ioc->diag_buffer_status[buffer_type] &
-	    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
-		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
-		    "registered\n", ioc->name, __func__, buffer_type);
-		return -EINVAL;
-	}
-
-	if (karg.unique_id & 0xffffff00) {
-		if (karg.unique_id != ioc->unique_id[buffer_type]) {
-			printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
-			    "registered\n", ioc->name, __func__,
-			    karg.unique_id);
-			return -EINVAL;
-		}
-	}
-
-	request_data = ioc->diag_buffer[buffer_type];
-	if (!request_data) {
-		printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for "
-		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
-		return -ENOMEM;
-	}
-
-	if (ioc->diag_buffer_status[buffer_type] & MPT2_DIAG_BUFFER_IS_RELEASED)
-		karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED |
-		    MPT2_APP_FLAGS_BUFFER_VALID);
-	else
-		karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED |
-		    MPT2_APP_FLAGS_BUFFER_VALID |
-		    MPT2_APP_FLAGS_FW_BUFFER_ACCESS);
-
-	for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
-		karg.product_specific[i] =
-		    ioc->product_specific[buffer_type][i];
-
-	karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type];
-	karg.driver_added_buffer_size = 0;
-	karg.unique_id = ioc->unique_id[buffer_type];
-	karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type];
-
-	if (copy_to_user(arg, &karg, sizeof(struct mpt2_diag_query))) {
-		printk(MPT2SAS_ERR_FMT "%s: unable to write mpt2_diag_query "
-		    "data @ %p\n", ioc->name, __func__, arg);
-		return -EFAULT;
-	}
-	return 0;
-}
-
-/**
- * _ctl_send_release - Diag Release Message
- * @ioc: per adapter object
- * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
- * @issue_reset - specifies whether host reset is required.
- *
- */
-static int
-_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset)
-{
-	Mpi2DiagReleaseRequest_t *mpi_request;
-	Mpi2DiagReleaseReply_t *mpi_reply;
-	u16 smid;
-	u16 ioc_status;
-	u32 ioc_state;
-	int rc;
-	unsigned long timeleft;
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	rc = 0;
-	*issue_reset = 0;
-
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "skipping due to FAULT state\n", ioc->name,
-		    __func__));
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	ioc->ctl_cmds.status = MPT2_CMD_PENDING;
-	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->ctl_cmds.smid = smid;
-
-	mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
-	mpi_request->BufferType = buffer_type;
-	mpi_request->VF_ID = 0; /* TODO */
-	mpi_request->VP_ID = 0;
-
-	init_completion(&ioc->ctl_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
-	    MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
-
-	if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
-		    __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2DiagReleaseRequest_t)/4);
-		if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
-			*issue_reset = 1;
-		rc = -EFAULT;
-		goto out;
-	}
-
-	/* process the completed Reply Message Frame */
-	if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
-		printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
-		    ioc->name, __func__);
-		rc = -EFAULT;
-		goto out;
-	}
-
-	mpi_reply = ioc->ctl_cmds.reply;
-	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-
-	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
-		ioc->diag_buffer_status[buffer_type] |=
-		    MPT2_DIAG_BUFFER_IS_RELEASED;
-		dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
-		    ioc->name, __func__));
-	} else {
-		printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
-		    "log_info(0x%08x)\n", ioc->name, __func__,
-		    ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
-		rc = -EFAULT;
-	}
-
- out:
-	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
-	return rc;
-}
-
-/**
- * _ctl_diag_release - request to send Diag Release Message to firmware
- * @arg - user space buffer containing ioctl content
- *
- * This allows ownership of the specified buffer to returned to the driver,
- * allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
- */
-static long
-_ctl_diag_release(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
-	struct mpt2_diag_release karg;
-	void *request_data;
-	int rc;
-	u8 buffer_type;
-	u8 issue_reset = 0;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	buffer_type = karg.unique_id & 0x000000ff;
-	if (!_ctl_diag_capability(ioc, buffer_type)) {
-		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
-		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
-		return -EPERM;
-	}
-
-	if ((ioc->diag_buffer_status[buffer_type] &
-	    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
-		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
-		    "registered\n", ioc->name, __func__, buffer_type);
-		return -EINVAL;
-	}
-
-	if (karg.unique_id != ioc->unique_id[buffer_type]) {
-		printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
-		    "registered\n", ioc->name, __func__, karg.unique_id);
-		return -EINVAL;
-	}
-
-	if (ioc->diag_buffer_status[buffer_type] &
-	    MPT2_DIAG_BUFFER_IS_RELEASED) {
-		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
-		    "is already released\n", ioc->name, __func__,
-		    buffer_type);
-		return 0;
-	}
-
-	request_data = ioc->diag_buffer[buffer_type];
-
-	if (!request_data) {
-		printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
-		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
-		return -ENOMEM;
-	}
-
-	/* buffers were released by due to host reset */
-	if ((ioc->diag_buffer_status[buffer_type] &
-	    MPT2_DIAG_BUFFER_IS_DIAG_RESET)) {
-		ioc->diag_buffer_status[buffer_type] |=
-		    MPT2_DIAG_BUFFER_IS_RELEASED;
-		ioc->diag_buffer_status[buffer_type] &=
-		    ~MPT2_DIAG_BUFFER_IS_DIAG_RESET;
-		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
-		    "was released due to host reset\n", ioc->name, __func__,
-		    buffer_type);
-		return 0;
-	}
-
-	rc = _ctl_send_release(ioc, buffer_type, &issue_reset);
-
-	if (issue_reset)
-		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-
-	return rc;
-}
-
-/**
- * _ctl_diag_read_buffer - request for copy of the diag buffer
- * @ioc: per adapter object
- * @arg - user space buffer containing ioctl content
- */
-static long
-_ctl_diag_read_buffer(struct MPT2SAS_ADAPTER *ioc, void __user *arg)
-{
-	struct mpt2_diag_read_buffer karg;
-	struct mpt2_diag_read_buffer __user *uarg = arg;
-	void *request_data, *diag_data;
-	Mpi2DiagBufferPostRequest_t *mpi_request;
-	Mpi2DiagBufferPostReply_t *mpi_reply;
-	int rc, i;
-	u8 buffer_type;
-	unsigned long timeleft, request_size, copy_size;
-	u16 smid;
-	u16 ioc_status;
-	u8 issue_reset = 0;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-	    __func__));
-
-	buffer_type = karg.unique_id & 0x000000ff;
-	if (!_ctl_diag_capability(ioc, buffer_type)) {
-		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
-		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
-		return -EPERM;
-	}
-
-	if (karg.unique_id != ioc->unique_id[buffer_type]) {
-		printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
-		    "registered\n", ioc->name, __func__, karg.unique_id);
-		return -EINVAL;
-	}
-
-	request_data = ioc->diag_buffer[buffer_type];
-	if (!request_data) {
-		printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for "
-		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
-		return -ENOMEM;
-	}
-
-	request_size = ioc->diag_buffer_sz[buffer_type];
-
-	if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
-		printk(MPT2SAS_ERR_FMT "%s: either the starting_offset "
-		    "or bytes_to_read are not 4 byte aligned\n", ioc->name,
-		    __func__);
-		return -EINVAL;
-	}
-
-	if (karg.starting_offset > request_size)
-		return -EINVAL;
-
-	diag_data = (void *)(request_data + karg.starting_offset);
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(%p), "
-	    "offset(%d), sz(%d)\n", ioc->name, __func__,
-	    diag_data, karg.starting_offset, karg.bytes_to_read));
-
-	/* Truncate data on requests that are too large */
-	if ((diag_data + karg.bytes_to_read < diag_data) ||
-	    (diag_data + karg.bytes_to_read > request_data + request_size))
-		copy_size = request_size - karg.starting_offset;
-	else
-		copy_size = karg.bytes_to_read;
-
-	if (copy_to_user((void __user *)uarg->diagnostic_data,
-	    diag_data, copy_size)) {
-		printk(MPT2SAS_ERR_FMT "%s: Unable to write "
-		    "mpt_diag_read_buffer_t data @ %p\n", ioc->name,
-		    __func__, diag_data);
-		return -EFAULT;
-	}
-
-	if ((karg.flags & MPT2_FLAGS_REREGISTER) == 0)
-		return 0;
-
-	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: Reregister "
-		"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type));
-	if ((ioc->diag_buffer_status[buffer_type] &
-	    MPT2_DIAG_BUFFER_IS_RELEASED) == 0) {
-		dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "buffer_type(0x%02x) is still registered\n", ioc->name,
-		     __func__, buffer_type));
-		return 0;
-	}
-	/* Get a free request frame and save the message context.
-	*/
-
-	if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	rc = 0;
-	ioc->ctl_cmds.status = MPT2_CMD_PENDING;
-	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->ctl_cmds.smid = smid;
-
-	mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
-	mpi_request->BufferType = buffer_type;
-	mpi_request->BufferLength =
-	    cpu_to_le32(ioc->diag_buffer_sz[buffer_type]);
-	mpi_request->BufferAddress =
-	    cpu_to_le64(ioc->diag_buffer_dma[buffer_type]);
-	for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
-		mpi_request->ProductSpecific[i] =
-			cpu_to_le32(ioc->product_specific[buffer_type][i]);
-	mpi_request->VF_ID = 0; /* TODO */
-	mpi_request->VP_ID = 0;
-
-	init_completion(&ioc->ctl_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
-	    MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
-
-	if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
-		    __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2DiagBufferPostRequest_t)/4);
-		if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
-		goto issue_host_reset;
-	}
-
-	/* process the completed Reply Message Frame */
-	if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
-		printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
-		    ioc->name, __func__);
-		rc = -EFAULT;
-		goto out;
-	}
-
-	mpi_reply = ioc->ctl_cmds.reply;
-	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-
-	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
-		ioc->diag_buffer_status[buffer_type] |=
-		    MPT2_DIAG_BUFFER_IS_REGISTERED;
-		dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
-		    ioc->name, __func__));
-	} else {
-		printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
-		    "log_info(0x%08x)\n", ioc->name, __func__,
-		    ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
-		rc = -EFAULT;
-	}
-
- issue_host_reset:
-	if (issue_reset)
-		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-
- out:
-
-	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
-	return rc;
-}
-
-
-#ifdef CONFIG_COMPAT
-/**
- * _ctl_compat_mpt_command - convert 32bit pointers to 64bit.
- * @ioc: per adapter object
- * @cmd - ioctl opcode
- * @arg - (struct mpt2_ioctl_command32)
- *
- * MPT2COMMAND32 - Handle 32bit applications running on 64bit os.
- */
-static long
-_ctl_compat_mpt_command(struct MPT2SAS_ADAPTER *ioc, unsigned cmd,
-	void __user *arg)
-{
-	struct mpt2_ioctl_command32 karg32;
-	struct mpt2_ioctl_command32 __user *uarg;
-	struct mpt2_ioctl_command karg;
-
-	if (_IOC_SIZE(cmd) != sizeof(struct mpt2_ioctl_command32))
-		return -EINVAL;
-
-	uarg = (struct mpt2_ioctl_command32 __user *) arg;
-
-	if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	memset(&karg, 0, sizeof(struct mpt2_ioctl_command));
-	karg.hdr.ioc_number = karg32.hdr.ioc_number;
-	karg.hdr.port_number = karg32.hdr.port_number;
-	karg.hdr.max_data_size = karg32.hdr.max_data_size;
-	karg.timeout = karg32.timeout;
-	karg.max_reply_bytes = karg32.max_reply_bytes;
-	karg.data_in_size = karg32.data_in_size;
-	karg.data_out_size = karg32.data_out_size;
-	karg.max_sense_bytes = karg32.max_sense_bytes;
-	karg.data_sge_offset = karg32.data_sge_offset;
-	karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr);
-	karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr);
-	karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr);
-	karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr);
-	return _ctl_do_mpt_command(ioc, karg, &uarg->mf);
-}
-#endif
-
-/**
- * _ctl_ioctl_main - main ioctl entry point
- * @file - (struct file)
- * @cmd - ioctl opcode
- * @arg -
- * compat - handles 32 bit applications in 64bit os
- */
-static long
-_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
-	u8 compat)
-{
-	struct MPT2SAS_ADAPTER *ioc;
-	struct mpt2_ioctl_header ioctl_header;
-	enum block_state state;
-	long ret = -EINVAL;
-
-	/* get IOCTL header */
-	if (copy_from_user(&ioctl_header, (char __user *)arg,
-	    sizeof(struct mpt2_ioctl_header))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-
-	if (_ctl_verify_adapter(ioctl_header.ioc_number, &ioc) == -1 || !ioc)
-		return -ENODEV;
-	/* pci_access_mutex lock acquired by ioctl path */
-	mutex_lock(&ioc->pci_access_mutex);
-	if (ioc->shost_recovery || ioc->pci_error_recovery ||
-		ioc->is_driver_loading || ioc->remove_host) {
-		ret = -EAGAIN;
-		goto out_unlock_pciaccess;
-	}
-
-	state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
-	if (state == NON_BLOCKING) {
-		if (!mutex_trylock(&ioc->ctl_cmds.mutex)) {
-			ret = -EAGAIN;
-			goto out_unlock_pciaccess;
-		}
-	} else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) {
-		ret = -ERESTARTSYS;
-		goto out_unlock_pciaccess;
-	}
-
-	switch (cmd) {
-	case MPT2IOCINFO:
-		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_iocinfo))
-			ret = _ctl_getiocinfo(ioc, arg);
-		break;
-#ifdef CONFIG_COMPAT
-	case MPT2COMMAND32:
-#endif
-	case MPT2COMMAND:
-	{
-		struct mpt2_ioctl_command __user *uarg;
-		struct mpt2_ioctl_command karg;
-#ifdef CONFIG_COMPAT
-		if (compat) {
-			ret = _ctl_compat_mpt_command(ioc, cmd, arg);
-			break;
-		}
-#endif
-		if (copy_from_user(&karg, arg, sizeof(karg))) {
-			printk(KERN_ERR "failure at %s:%d/%s()!\n",
-			    __FILE__, __LINE__, __func__);
-			ret = -EFAULT;
-			break;
-		}
-
-		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) {
-			uarg = arg;
-			ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf);
-		}
-		break;
-	}
-	case MPT2EVENTQUERY:
-		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventquery))
-			ret = _ctl_eventquery(ioc, arg);
-		break;
-	case MPT2EVENTENABLE:
-		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventenable))
-			ret = _ctl_eventenable(ioc, arg);
-		break;
-	case MPT2EVENTREPORT:
-		ret = _ctl_eventreport(ioc, arg);
-		break;
-	case MPT2HARDRESET:
-		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_diag_reset))
-			ret = _ctl_do_reset(ioc, arg);
-		break;
-	case MPT2BTDHMAPPING:
-		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_btdh_mapping))
-			ret = _ctl_btdh_mapping(ioc, arg);
-		break;
-	case MPT2DIAGREGISTER:
-		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_register))
-			ret = _ctl_diag_register(ioc, arg);
-		break;
-	case MPT2DIAGUNREGISTER:
-		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_unregister))
-			ret = _ctl_diag_unregister(ioc, arg);
-		break;
-	case MPT2DIAGQUERY:
-		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_query))
-			ret = _ctl_diag_query(ioc, arg);
-		break;
-	case MPT2DIAGRELEASE:
-		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_release))
-			ret = _ctl_diag_release(ioc, arg);
-		break;
-	case MPT2DIAGREADBUFFER:
-		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_read_buffer))
-			ret = _ctl_diag_read_buffer(ioc, arg);
-		break;
-	default:
-
-		dctlprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "unsupported ioctl opcode(0x%08x)\n", ioc->name, cmd));
-		break;
-	}
-
-	mutex_unlock(&ioc->ctl_cmds.mutex);
-out_unlock_pciaccess:
-	mutex_unlock(&ioc->pci_access_mutex);
-	return ret;
-}
-
-/**
- * _ctl_ioctl - main ioctl entry point (unlocked)
- * @file - (struct file)
- * @cmd - ioctl opcode
- * @arg -
- */
-static long
-_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	long ret;
-
-	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0);
-	return ret;
-}
-#ifdef CONFIG_COMPAT
-/**
- * _ctl_ioctl_compat - main ioctl entry point (compat)
- * @file -
- * @cmd -
- * @arg -
- *
- * This routine handles 32 bit applications in 64bit os.
- */
-static long
-_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
-{
-	long ret;
-
-	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1);
-	return ret;
-}
-#endif
-
-/* scsi host attributes */
-
-/**
- * _ctl_version_fw_show - firmware version
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_fw_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
-	    (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
-	    (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
-	    (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
-	    ioc->facts.FWVersion.Word & 0x000000FF);
-}
-static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL);
-
-/**
- * _ctl_version_bios_show - bios version
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_bios_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
-
-	return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
-	    (version & 0xFF000000) >> 24,
-	    (version & 0x00FF0000) >> 16,
-	    (version & 0x0000FF00) >> 8,
-	    version & 0x000000FF);
-}
-static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL);
-
-/**
- * _ctl_version_mpi_show - MPI (message passing interface) version
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, PAGE_SIZE, "%03x.%02x\n",
-	    ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8);
-}
-static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL);
-
-/**
- * _ctl_version_product_show - product name
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_product_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName);
-}
-static DEVICE_ATTR(version_product, S_IRUGO,
-   _ctl_version_product_show, NULL);
-
-/**
- * _ctl_version_nvdata_persistent_show - ndvata persistent version
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_nvdata_persistent_show(struct device *cdev,
-    struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, PAGE_SIZE, "%08xh\n",
-	    le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word));
-}
-static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
-    _ctl_version_nvdata_persistent_show, NULL);
-
-/**
- * _ctl_version_nvdata_default_show - nvdata default version
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_version_nvdata_default_show(struct device *cdev,
-    struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, PAGE_SIZE, "%08xh\n",
-	    le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word));
-}
-static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
-    _ctl_version_nvdata_default_show, NULL);
-
-/**
- * _ctl_board_name_show - board name
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_board_name_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName);
-}
-static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL);
-
-/**
- * _ctl_board_assembly_show - board assembly name
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly);
-}
-static DEVICE_ATTR(board_assembly, S_IRUGO,
-    _ctl_board_assembly_show, NULL);
-
-/**
- * _ctl_board_tracer_show - board tracer number
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber);
-}
-static DEVICE_ATTR(board_tracer, S_IRUGO,
-    _ctl_board_tracer_show, NULL);
-
-/**
- * _ctl_io_delay_show - io missing delay
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is for firmware implemention for deboucing device
- * removal events.
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_io_delay_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
-}
-static DEVICE_ATTR(io_delay, S_IRUGO,
-    _ctl_io_delay_show, NULL);
-
-/**
- * _ctl_device_delay_show - device missing delay
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is for firmware implemention for deboucing device
- * removal events.
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_device_delay_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
-}
-static DEVICE_ATTR(device_delay, S_IRUGO,
-    _ctl_device_delay_show, NULL);
-
-/**
- * _ctl_fw_queue_depth_show - global credits
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is firmware queue depth limit
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit);
-}
-static DEVICE_ATTR(fw_queue_depth, S_IRUGO,
-    _ctl_fw_queue_depth_show, NULL);
-
-/**
- * _ctl_sas_address_show - sas address
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is the controller sas address
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
-	    (unsigned long long)ioc->sas_hba.sas_address);
-}
-static DEVICE_ATTR(host_sas_address, S_IRUGO,
-    _ctl_host_sas_address_show, NULL);
-
-/**
- * _ctl_logging_level_show - logging level
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read/write' shost attribute.
- */
-static ssize_t
-_ctl_logging_level_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level);
-}
-static ssize_t
-_ctl_logging_level_store(struct device *cdev, struct device_attribute *attr,
-    const char *buf, size_t count)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	int val = 0;
-
-	if (sscanf(buf, "%x", &val) != 1)
-		return -EINVAL;
-
-	ioc->logging_level = val;
-	printk(MPT2SAS_INFO_FMT "logging_level=%08xh\n", ioc->name,
-	    ioc->logging_level);
-	return strlen(buf);
-}
-static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR,
-    _ctl_logging_level_show, _ctl_logging_level_store);
-
-/* device attributes */
-/*
- * _ctl_fwfault_debug_show - show/store fwfault_debug
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * mpt2sas_fwfault_debug is command line option
- * A sysfs 'read/write' shost attribute.
- */
-static ssize_t
-_ctl_fwfault_debug_show(struct device *cdev,
-    struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug);
-}
-static ssize_t
-_ctl_fwfault_debug_store(struct device *cdev,
-    struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	int val = 0;
-
-	if (sscanf(buf, "%d", &val) != 1)
-		return -EINVAL;
-
-	ioc->fwfault_debug = val;
-	printk(MPT2SAS_INFO_FMT "fwfault_debug=%d\n", ioc->name,
-	    ioc->fwfault_debug);
-	return strlen(buf);
-}
-static DEVICE_ATTR(fwfault_debug, S_IRUGO | S_IWUSR,
-    _ctl_fwfault_debug_show, _ctl_fwfault_debug_store);
-
-
-/**
- * _ctl_ioc_reset_count_show - ioc reset count
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is firmware queue depth limit
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_ioc_reset_count_show(struct device *cdev, struct device_attribute *attr,
-    char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	return snprintf(buf, PAGE_SIZE, "%08d\n", ioc->ioc_reset_count);
-}
-static DEVICE_ATTR(ioc_reset_count, S_IRUGO,
-    _ctl_ioc_reset_count_show, NULL);
-
-/**
- * _ctl_ioc_reply_queue_count_show - number of reply queues
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is number of reply queues
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_ioc_reply_queue_count_show(struct device *cdev,
-	 struct device_attribute *attr, char *buf)
-{
-	u8 reply_queue_count;
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	if ((ioc->facts.IOCCapabilities &
-	    MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable)
-		reply_queue_count = ioc->reply_queue_count;
-	else
-		reply_queue_count = 1;
-	return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count);
-}
-static DEVICE_ATTR(reply_queue_count, S_IRUGO,
-	 _ctl_ioc_reply_queue_count_show, NULL);
-
-/**
- * _ctl_BRM_status_show - Backup Rail Monitor Status
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is number of reply queues
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_BRM_status_show(struct device *cdev, struct device_attribute *attr,
-	char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	Mpi2IOUnitPage3_t *io_unit_pg3 = NULL;
-	Mpi2ConfigReply_t mpi_reply;
-	u16 backup_rail_monitor_status = 0;
-	u16 ioc_status;
-	int sz;
-	ssize_t rc = 0;
-
-	if (!ioc->is_warpdrive) {
-		printk(MPT2SAS_ERR_FMT "%s: BRM attribute is only for"\
-		    "warpdrive\n", ioc->name, __func__);
-		goto out;
-	}
-	/* pci_access_mutex lock acquired by sysfs show path */
-	mutex_lock(&ioc->pci_access_mutex);
-	if (ioc->pci_error_recovery || ioc->remove_host) {
-		mutex_unlock(&ioc->pci_access_mutex);
-		return 0;
-	}
-
-	/* allocate upto GPIOVal 36 entries */
-	sz = offsetof(Mpi2IOUnitPage3_t, GPIOVal) + (sizeof(u16) * 36);
-	io_unit_pg3 = kzalloc(sz, GFP_KERNEL);
-	if (!io_unit_pg3) {
-		printk(MPT2SAS_ERR_FMT "%s: failed allocating memory"\
-		    "for iounit_pg3: (%d) bytes\n", ioc->name, __func__, sz);
-		goto out;
-	}
-
-	if (mpt2sas_config_get_iounit_pg3(ioc, &mpi_reply, io_unit_pg3, sz) !=
-	    0) {
-		printk(MPT2SAS_ERR_FMT
-		    "%s: failed reading iounit_pg3\n", ioc->name,
-		    __func__);
-		goto out;
-	}
-
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "%s: iounit_pg3 failed with"\
-		    "ioc_status(0x%04x)\n", ioc->name, __func__, ioc_status);
-		goto out;
-	}
-
-	if (io_unit_pg3->GPIOCount < 25) {
-		printk(MPT2SAS_ERR_FMT "%s: iounit_pg3->GPIOCount less than"\
-		     "25 entries, detected (%d) entries\n", ioc->name, __func__,
-		    io_unit_pg3->GPIOCount);
-		goto out;
-	}
-
-	/* BRM status is in bit zero of GPIOVal[24] */
-	backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
-	rc = snprintf(buf, PAGE_SIZE, "%d\n", (backup_rail_monitor_status & 1));
-
- out:
-	kfree(io_unit_pg3);
-	mutex_unlock(&ioc->pci_access_mutex);
-	return rc;
-}
-static DEVICE_ATTR(BRM_status, S_IRUGO, _ctl_BRM_status_show, NULL);
-
-struct DIAG_BUFFER_START {
-	__le32 Size;
-	__le32 DiagVersion;
-	u8 BufferType;
-	u8 Reserved[3];
-	__le32 Reserved1;
-	__le32 Reserved2;
-	__le32 Reserved3;
-};
-/**
- * _ctl_host_trace_buffer_size_show - host buffer size (trace only)
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_host_trace_buffer_size_show(struct device *cdev,
-    struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	u32 size = 0;
-	struct DIAG_BUFFER_START *request_data;
-
-	if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
-		printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
-		    "registered\n", ioc->name, __func__);
-		return 0;
-	}
-
-	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
-	    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
-		printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
-		    "registered\n", ioc->name, __func__);
-		return 0;
-	}
-
-	request_data = (struct DIAG_BUFFER_START *)
-	    ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE];
-	if ((le32_to_cpu(request_data->DiagVersion) == 0x00000000 ||
-	    le32_to_cpu(request_data->DiagVersion) == 0x01000000) &&
-	    le32_to_cpu(request_data->Reserved3) == 0x4742444c)
-		size = le32_to_cpu(request_data->Size);
-
-	ioc->ring_buffer_sz = size;
-	return snprintf(buf, PAGE_SIZE, "%d\n", size);
-}
-static DEVICE_ATTR(host_trace_buffer_size, S_IRUGO,
-	 _ctl_host_trace_buffer_size_show, NULL);
-
-/**
- * _ctl_host_trace_buffer_show - firmware ring buffer (trace only)
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read/write' shost attribute.
- *
- * You will only be able to read 4k bytes of ring buffer at a time.
- * In order to read beyond 4k bytes, you will have to write out the
- * offset to the same attribute, it will move the pointer.
- */
-static ssize_t
-_ctl_host_trace_buffer_show(struct device *cdev, struct device_attribute *attr,
-     char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	void *request_data;
-	u32 size;
-
-	if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
-		printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
-		    "registered\n", ioc->name, __func__);
-		return 0;
-	}
-
-	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
-	    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
-		printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
-		    "registered\n", ioc->name, __func__);
-		return 0;
-	}
-
-	if (ioc->ring_buffer_offset > ioc->ring_buffer_sz)
-		return 0;
-
-	size = ioc->ring_buffer_sz - ioc->ring_buffer_offset;
-	size = (size > PAGE_SIZE) ? PAGE_SIZE : size;
-	request_data = ioc->diag_buffer[0] + ioc->ring_buffer_offset;
-	memcpy(buf, request_data, size);
-	return size;
-}
-
-static ssize_t
-_ctl_host_trace_buffer_store(struct device *cdev, struct device_attribute *attr,
-    const char *buf, size_t count)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	int val = 0;
-
-	if (sscanf(buf, "%d", &val) != 1)
-		return -EINVAL;
-
-	ioc->ring_buffer_offset = val;
-	return strlen(buf);
-}
-static DEVICE_ATTR(host_trace_buffer, S_IRUGO | S_IWUSR,
-    _ctl_host_trace_buffer_show, _ctl_host_trace_buffer_store);
-
-/*****************************************/
-
-/**
- * _ctl_host_trace_buffer_enable_show - firmware ring buffer (trace only)
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * A sysfs 'read/write' shost attribute.
- *
- * This is a mechnism to post/release host_trace_buffers
- */
-static ssize_t
-_ctl_host_trace_buffer_enable_show(struct device *cdev,
-    struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	if ((!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) ||
-	   ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
-	    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0))
-		return snprintf(buf, PAGE_SIZE, "off\n");
-	else if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
-	    MPT2_DIAG_BUFFER_IS_RELEASED))
-		return snprintf(buf, PAGE_SIZE, "release\n");
-	else
-		return snprintf(buf, PAGE_SIZE, "post\n");
-}
-
-static ssize_t
-_ctl_host_trace_buffer_enable_store(struct device *cdev,
-    struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct Scsi_Host *shost = class_to_shost(cdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	char str[10] = "";
-	struct mpt2_diag_register diag_register;
-	u8 issue_reset = 0;
-
-	if (sscanf(buf, "%9s", str) != 1)
-		return -EINVAL;
-
-	if (!strcmp(str, "post")) {
-		/* exit out if host buffers are already posted */
-		if ((ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) &&
-		    (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
-		    MPT2_DIAG_BUFFER_IS_REGISTERED) &&
-		    ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
-		    MPT2_DIAG_BUFFER_IS_RELEASED) == 0))
-			goto out;
-		memset(&diag_register, 0, sizeof(struct mpt2_diag_register));
-		printk(MPT2SAS_INFO_FMT "posting host trace buffers\n",
-		    ioc->name);
-		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
-		diag_register.requested_buffer_size = (1024 * 1024);
-		diag_register.unique_id = 0x7075900;
-		ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] = 0;
-		_ctl_diag_register_2(ioc,  &diag_register);
-	} else if (!strcmp(str, "release")) {
-		/* exit out if host buffers are already released */
-		if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE])
-			goto out;
-		if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
-		    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0)
-			goto out;
-		if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
-		    MPT2_DIAG_BUFFER_IS_RELEASED))
-			goto out;
-		printk(MPT2SAS_INFO_FMT "releasing host trace buffer\n",
-		    ioc->name);
-		_ctl_send_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE, &issue_reset);
-	}
-
- out:
-	return strlen(buf);
-}
-static DEVICE_ATTR(host_trace_buffer_enable, S_IRUGO | S_IWUSR,
-    _ctl_host_trace_buffer_enable_show, _ctl_host_trace_buffer_enable_store);
-
-struct device_attribute *mpt2sas_host_attrs[] = {
-	&dev_attr_version_fw,
-	&dev_attr_version_bios,
-	&dev_attr_version_mpi,
-	&dev_attr_version_product,
-	&dev_attr_version_nvdata_persistent,
-	&dev_attr_version_nvdata_default,
-	&dev_attr_board_name,
-	&dev_attr_board_assembly,
-	&dev_attr_board_tracer,
-	&dev_attr_io_delay,
-	&dev_attr_device_delay,
-	&dev_attr_logging_level,
-	&dev_attr_fwfault_debug,
-	&dev_attr_fw_queue_depth,
-	&dev_attr_host_sas_address,
-	&dev_attr_ioc_reset_count,
-	&dev_attr_host_trace_buffer_size,
-	&dev_attr_host_trace_buffer,
-	&dev_attr_host_trace_buffer_enable,
-	&dev_attr_reply_queue_count,
-	&dev_attr_BRM_status,
-	NULL,
-};
-
-/**
- * _ctl_device_sas_address_show - sas address
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is the sas address for the target
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr,
-    char *buf)
-{
-	struct scsi_device *sdev = to_scsi_device(dev);
-	struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
-
-	return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
-	    (unsigned long long)sas_device_priv_data->sas_target->sas_address);
-}
-static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL);
-
-/**
- * _ctl_device_handle_show - device handle
- * @cdev - pointer to embedded class device
- * @buf - the buffer returned
- *
- * This is the firmware assigned device handle
- *
- * A sysfs 'read-only' shost attribute.
- */
-static ssize_t
-_ctl_device_handle_show(struct device *dev, struct device_attribute *attr,
-    char *buf)
-{
-	struct scsi_device *sdev = to_scsi_device(dev);
-	struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
-
-	return snprintf(buf, PAGE_SIZE, "0x%04x\n",
-	    sas_device_priv_data->sas_target->handle);
-}
-static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL);
-
-struct device_attribute *mpt2sas_dev_attrs[] = {
-	&dev_attr_sas_address,
-	&dev_attr_sas_device_handle,
-	NULL,
-};
-
-static const struct file_operations ctl_fops = {
-	.owner = THIS_MODULE,
-	.unlocked_ioctl = _ctl_ioctl,
-	.poll = _ctl_poll,
-	.fasync = _ctl_fasync,
-#ifdef CONFIG_COMPAT
-	.compat_ioctl = _ctl_ioctl_compat,
-#endif
-	.llseek = noop_llseek,
-};
-
-static struct miscdevice ctl_dev = {
-	.minor  = MPT2SAS_MINOR,
-	.name   = MPT2SAS_DEV_NAME,
-	.fops   = &ctl_fops,
-};
-
-/**
- * mpt2sas_ctl_init - main entry point for ctl.
- *
- */
-void
-mpt2sas_ctl_init(void)
-{
-	async_queue = NULL;
-	if (misc_register(&ctl_dev) < 0)
-		printk(KERN_ERR "%s can't register misc device [minor=%d]\n",
-		    MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
-
-	init_waitqueue_head(&ctl_poll_wait);
-}
-
-/**
- * mpt2sas_ctl_exit - exit point for ctl
- *
- */
-void
-mpt2sas_ctl_exit(void)
-{
-	struct MPT2SAS_ADAPTER *ioc;
-	int i;
-
-	list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
-
-		/* free memory associated to diag buffers */
-		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
-			if (!ioc->diag_buffer[i])
-				continue;
-			pci_free_consistent(ioc->pdev, ioc->diag_buffer_sz[i],
-			    ioc->diag_buffer[i], ioc->diag_buffer_dma[i]);
-			ioc->diag_buffer[i] = NULL;
-			ioc->diag_buffer_status[i] = 0;
-		}
-
-		kfree(ioc->event_log);
-	}
-	misc_deregister(&ctl_dev);
-}
-
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
deleted file mode 100644
index 46b2fc5b7..000000000
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- * Management Module Support for MPT (Message Passing Technology) based
- * controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h
- * Copyright (C) 2007-2014  LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
- * USA.
- */
-
-#ifndef MPT2SAS_CTL_H_INCLUDED
-#define MPT2SAS_CTL_H_INCLUDED
-
-#ifdef __KERNEL__
-#include <linux/miscdevice.h>
-#endif
-
-#define MPT2SAS_DEV_NAME	"mpt2ctl"
-#define MPT2_MAGIC_NUMBER	'L'
-#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
-
-/**
- * IOCTL opcodes
- */
-#define MPT2IOCINFO	_IOWR(MPT2_MAGIC_NUMBER, 17, \
-    struct mpt2_ioctl_iocinfo)
-#define MPT2COMMAND	_IOWR(MPT2_MAGIC_NUMBER, 20, \
-    struct mpt2_ioctl_command)
-#ifdef CONFIG_COMPAT
-#define MPT2COMMAND32	_IOWR(MPT2_MAGIC_NUMBER, 20, \
-    struct mpt2_ioctl_command32)
-#endif
-#define MPT2EVENTQUERY	_IOWR(MPT2_MAGIC_NUMBER, 21, \
-    struct mpt2_ioctl_eventquery)
-#define MPT2EVENTENABLE	_IOWR(MPT2_MAGIC_NUMBER, 22, \
-    struct mpt2_ioctl_eventenable)
-#define MPT2EVENTREPORT	_IOWR(MPT2_MAGIC_NUMBER, 23, \
-    struct mpt2_ioctl_eventreport)
-#define MPT2HARDRESET	_IOWR(MPT2_MAGIC_NUMBER, 24, \
-    struct mpt2_ioctl_diag_reset)
-#define MPT2BTDHMAPPING	_IOWR(MPT2_MAGIC_NUMBER, 31, \
-    struct mpt2_ioctl_btdh_mapping)
-
-/* diag buffer support */
-#define MPT2DIAGREGISTER _IOWR(MPT2_MAGIC_NUMBER, 26, \
-    struct mpt2_diag_register)
-#define MPT2DIAGRELEASE	_IOWR(MPT2_MAGIC_NUMBER, 27, \
-    struct mpt2_diag_release)
-#define MPT2DIAGUNREGISTER _IOWR(MPT2_MAGIC_NUMBER, 28, \
-    struct mpt2_diag_unregister)
-#define MPT2DIAGQUERY	_IOWR(MPT2_MAGIC_NUMBER, 29, \
-    struct mpt2_diag_query)
-#define MPT2DIAGREADBUFFER _IOWR(MPT2_MAGIC_NUMBER, 30, \
-    struct mpt2_diag_read_buffer)
-
-/**
- * struct mpt2_ioctl_header - main header structure
- * @ioc_number -  IOC unit number
- * @port_number - IOC port number
- * @max_data_size - maximum number bytes to transfer on read
- */
-struct mpt2_ioctl_header {
-	uint32_t ioc_number;
-	uint32_t port_number;
-	uint32_t max_data_size;
-};
-
-/**
- * struct mpt2_ioctl_diag_reset - diagnostic reset
- * @hdr - generic header
- */
-struct mpt2_ioctl_diag_reset {
-	struct mpt2_ioctl_header hdr;
-};
-
-
-/**
- * struct mpt2_ioctl_pci_info - pci device info
- * @device - pci device id
- * @function - pci function id
- * @bus - pci bus id
- * @segment_id - pci segment id
- */
-struct mpt2_ioctl_pci_info {
-	union {
-		struct {
-			uint32_t device:5;
-			uint32_t function:3;
-			uint32_t bus:24;
-		} bits;
-		uint32_t  word;
-	} u;
-	uint32_t segment_id;
-};
-
-
-#define MPT2_IOCTL_INTERFACE_SCSI	(0x00)
-#define MPT2_IOCTL_INTERFACE_FC		(0x01)
-#define MPT2_IOCTL_INTERFACE_FC_IP	(0x02)
-#define MPT2_IOCTL_INTERFACE_SAS	(0x03)
-#define MPT2_IOCTL_INTERFACE_SAS2	(0x04)
-#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200	(0x05)
-#define MPT2_IOCTL_VERSION_LENGTH	(32)
-
-/**
- * struct mpt2_ioctl_iocinfo - generic controller info
- * @hdr - generic header
- * @adapter_type - type of adapter (spi, fc, sas)
- * @port_number - port number
- * @pci_id - PCI Id
- * @hw_rev - hardware revision
- * @sub_system_device - PCI subsystem Device ID
- * @sub_system_vendor - PCI subsystem Vendor ID
- * @rsvd0 - reserved
- * @firmware_version - firmware version
- * @bios_version - BIOS version
- * @driver_version - driver version - 32 ASCII characters
- * @rsvd1 - reserved
- * @scsi_id - scsi id of adapter 0
- * @rsvd2 - reserved
- * @pci_information - pci info (2nd revision)
- */
-struct mpt2_ioctl_iocinfo {
-	struct mpt2_ioctl_header hdr;
-	uint32_t adapter_type;
-	uint32_t port_number;
-	uint32_t pci_id;
-	uint32_t hw_rev;
-	uint32_t subsystem_device;
-	uint32_t subsystem_vendor;
-	uint32_t rsvd0;
-	uint32_t firmware_version;
-	uint32_t bios_version;
-	uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH];
-	uint8_t rsvd1;
-	uint8_t scsi_id;
-	uint16_t rsvd2;
-	struct mpt2_ioctl_pci_info pci_information;
-};
-
-
-/* number of event log entries */
-#define MPT2SAS_CTL_EVENT_LOG_SIZE (50)
-
-/**
- * struct mpt2_ioctl_eventquery - query event count and type
- * @hdr - generic header
- * @event_entries - number of events returned by get_event_report
- * @rsvd - reserved
- * @event_types - type of events currently being captured
- */
-struct mpt2_ioctl_eventquery {
-	struct mpt2_ioctl_header hdr;
-	uint16_t event_entries;
-	uint16_t rsvd;
-	uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
-};
-
-/**
- * struct mpt2_ioctl_eventenable - enable/disable event capturing
- * @hdr - generic header
- * @event_types - toggle off/on type of events to be captured
- */
-struct mpt2_ioctl_eventenable {
-	struct mpt2_ioctl_header hdr;
-	uint32_t event_types[4];
-};
-
-#define MPT2_EVENT_DATA_SIZE (192)
-/**
- * struct MPT2_IOCTL_EVENTS -
- * @event - the event that was reported
- * @context - unique value for each event assigned by driver
- * @data - event data returned in fw reply message
- */
-struct MPT2_IOCTL_EVENTS {
-	uint32_t event;
-	uint32_t context;
-	uint8_t data[MPT2_EVENT_DATA_SIZE];
-};
-
-/**
- * struct mpt2_ioctl_eventreport - returing event log
- * @hdr - generic header
- * @event_data - (see struct MPT2_IOCTL_EVENTS)
- */
-struct mpt2_ioctl_eventreport {
-	struct mpt2_ioctl_header hdr;
-	struct MPT2_IOCTL_EVENTS event_data[1];
-};
-
-/**
- * struct mpt2_ioctl_command - generic mpt firmware passthru ioctl
- * @hdr - generic header
- * @timeout - command timeout in seconds. (if zero then use driver default
- *  value).
- * @reply_frame_buf_ptr - reply location
- * @data_in_buf_ptr - destination for read
- * @data_out_buf_ptr - data source for write
- * @sense_data_ptr - sense data location
- * @max_reply_bytes - maximum number of reply bytes to be sent to app.
- * @data_in_size - number bytes for data transfer in (read)
- * @data_out_size - number bytes for data transfer out (write)
- * @max_sense_bytes - maximum number of bytes for auto sense buffers
- * @data_sge_offset - offset in words from the start of the request message to
- * the first SGL
- * @mf[1];
- */
-struct mpt2_ioctl_command {
-	struct mpt2_ioctl_header hdr;
-	uint32_t timeout;
-	void __user *reply_frame_buf_ptr;
-	void __user *data_in_buf_ptr;
-	void __user *data_out_buf_ptr;
-	void __user *sense_data_ptr;
-	uint32_t max_reply_bytes;
-	uint32_t data_in_size;
-	uint32_t data_out_size;
-	uint32_t max_sense_bytes;
-	uint32_t data_sge_offset;
-	uint8_t mf[1];
-};
-
-#ifdef CONFIG_COMPAT
-struct mpt2_ioctl_command32 {
-	struct mpt2_ioctl_header hdr;
-	uint32_t timeout;
-	uint32_t reply_frame_buf_ptr;
-	uint32_t data_in_buf_ptr;
-	uint32_t data_out_buf_ptr;
-	uint32_t sense_data_ptr;
-	uint32_t max_reply_bytes;
-	uint32_t data_in_size;
-	uint32_t data_out_size;
-	uint32_t max_sense_bytes;
-	uint32_t data_sge_offset;
-	uint8_t mf[1];
-};
-#endif
-
-/**
- * struct mpt2_ioctl_btdh_mapping - mapping info
- * @hdr - generic header
- * @id - target device identification number
- * @bus - SCSI bus number that the target device exists on
- * @handle - device handle for the target device
- * @rsvd - reserved
- *
- * To obtain a bus/id the application sets
- * handle to valid handle, and bus/id to 0xFFFF.
- *
- * To obtain the device handle the application sets
- * bus/id valid value, and the handle to 0xFFFF.
- */
-struct mpt2_ioctl_btdh_mapping {
-	struct mpt2_ioctl_header hdr;
-	uint32_t id;
-	uint32_t bus;
-	uint16_t handle;
-	uint16_t rsvd;
-};
-
-
-/* status bits for ioc->diag_buffer_status */
-#define MPT2_DIAG_BUFFER_IS_REGISTERED	(0x01)
-#define MPT2_DIAG_BUFFER_IS_RELEASED	(0x02)
-#define MPT2_DIAG_BUFFER_IS_DIAG_RESET	(0x04)
-
-/* application flags for mpt2_diag_register, mpt2_diag_query */
-#define MPT2_APP_FLAGS_APP_OWNED	(0x0001)
-#define MPT2_APP_FLAGS_BUFFER_VALID	(0x0002)
-#define MPT2_APP_FLAGS_FW_BUFFER_ACCESS	(0x0004)
-
-/* flags for mpt2_diag_read_buffer */
-#define MPT2_FLAGS_REREGISTER		(0x0001)
-
-#define MPT2_PRODUCT_SPECIFIC_DWORDS 		23
-
-/**
- * struct mpt2_diag_register - application register with driver
- * @hdr - generic header
- * @reserved -
- * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
- * @application_flags - misc flags
- * @diagnostic_flags - specifies flags affecting command processing
- * @product_specific - product specific information
- * @requested_buffer_size - buffers size in bytes
- * @unique_id - tag specified by application that is used to signal ownership
- *  of the buffer.
- *
- * This will allow the driver to setup any required buffers that will be
- * needed by firmware to communicate with the driver.
- */
-struct mpt2_diag_register {
-	struct mpt2_ioctl_header hdr;
-	uint8_t reserved;
-	uint8_t buffer_type;
-	uint16_t application_flags;
-	uint32_t diagnostic_flags;
-	uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
-	uint32_t requested_buffer_size;
-	uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_unregister - application unregister with driver
- * @hdr - generic header
- * @unique_id - tag uniquely identifies the buffer to be unregistered
- *
- * This will allow the driver to cleanup any memory allocated for diag
- * messages and to free up any resources.
- */
-struct mpt2_diag_unregister {
-	struct mpt2_ioctl_header hdr;
-	uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_query - query relevant info associated with diag buffers
- * @hdr - generic header
- * @reserved -
- * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
- * @application_flags - misc flags
- * @diagnostic_flags - specifies flags affecting command processing
- * @product_specific - product specific information
- * @total_buffer_size - diag buffer size in bytes
- * @driver_added_buffer_size - size of extra space appended to end of buffer
- * @unique_id - unique id associated with this buffer.
- *
- * The application will send only buffer_type and unique_id.  Driver will
- * inspect unique_id first, if valid, fill in all the info.  If unique_id is
- * 0x00, the driver will return info specified by Buffer Type.
- */
-struct mpt2_diag_query {
-	struct mpt2_ioctl_header hdr;
-	uint8_t reserved;
-	uint8_t buffer_type;
-	uint16_t application_flags;
-	uint32_t diagnostic_flags;
-	uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
-	uint32_t total_buffer_size;
-	uint32_t driver_added_buffer_size;
-	uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_release -  request to send Diag Release Message to firmware
- * @hdr - generic header
- * @unique_id - tag uniquely identifies the buffer to be released
- *
- * This allows ownership of the specified buffer to returned to the driver,
- * allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
- */
-struct mpt2_diag_release {
-	struct mpt2_ioctl_header hdr;
-	uint32_t unique_id;
-};
-
-/**
- * struct mpt2_diag_read_buffer - request for copy of the diag buffer
- * @hdr - generic header
- * @status -
- * @reserved -
- * @flags - misc flags
- * @starting_offset - starting offset within drivers buffer where to start
- *  reading data at into the specified application buffer
- * @bytes_to_read - number of bytes to copy from the drivers buffer into the
- *  application buffer starting at starting_offset.
- * @unique_id - unique id associated with this buffer.
- * @diagnostic_data - data payload
- */
-struct mpt2_diag_read_buffer {
-	struct mpt2_ioctl_header hdr;
-	uint8_t status;
-	uint8_t reserved;
-	uint16_t flags;
-	uint32_t starting_offset;
-	uint32_t bytes_to_read;
-	uint32_t unique_id;
-	uint32_t diagnostic_data[1];
-};
-
-#endif /* MPT2SAS_CTL_H_INCLUDED */
diff --git a/drivers/scsi/mpt2sas/mpt2sas_debug.h b/drivers/scsi/mpt2sas/mpt2sas_debug.h
deleted file mode 100644
index 277120d45..000000000
--- a/drivers/scsi/mpt2sas/mpt2sas_debug.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Logging Support for MPT (Message Passing Technology) based controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_debug.c
- * Copyright (C) 2007-2014  LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
- * USA.
- */
-
-#ifndef MPT2SAS_DEBUG_H_INCLUDED
-#define MPT2SAS_DEBUG_H_INCLUDED
-
-#define MPT_DEBUG			0x00000001
-#define MPT_DEBUG_MSG_FRAME		0x00000002
-#define MPT_DEBUG_SG			0x00000004
-#define MPT_DEBUG_EVENTS		0x00000008
-#define MPT_DEBUG_EVENT_WORK_TASK	0x00000010
-#define MPT_DEBUG_INIT			0x00000020
-#define MPT_DEBUG_EXIT			0x00000040
-#define MPT_DEBUG_FAIL			0x00000080
-#define MPT_DEBUG_TM			0x00000100
-#define MPT_DEBUG_REPLY			0x00000200
-#define MPT_DEBUG_HANDSHAKE		0x00000400
-#define MPT_DEBUG_CONFIG		0x00000800
-#define MPT_DEBUG_DL			0x00001000
-#define MPT_DEBUG_RESET			0x00002000
-#define MPT_DEBUG_SCSI			0x00004000
-#define MPT_DEBUG_IOCTL			0x00008000
-#define MPT_DEBUG_CSMISAS		0x00010000
-#define MPT_DEBUG_SAS			0x00020000
-#define MPT_DEBUG_TRANSPORT		0x00040000
-#define MPT_DEBUG_TASK_SET_FULL		0x00080000
-
-#define MPT_DEBUG_TARGET_MODE		0x00100000
-
-
-/*
- * CONFIG_SCSI_MPT2SAS_LOGGING - enabled in Kconfig
- */
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-#define MPT_CHECK_LOGGING(IOC, CMD, BITS)			\
-{								\
-	if (IOC->logging_level & BITS)				\
-		CMD;						\
-}
-#else
-#define MPT_CHECK_LOGGING(IOC, CMD, BITS)
-#endif /* CONFIG_SCSI_MPT2SAS_LOGGING */
-
-
-/*
- * debug macros
- */
-
-#define dprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG)
-
-#define dsgprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SG)
-
-#define devtprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENTS)
-
-#define dewtprintk(IOC, CMD)		\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENT_WORK_TASK)
-
-#define dinitprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_INIT)
-
-#define dexitprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EXIT)
-
-#define dfailprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FAIL)
-
-#define dtmprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TM)
-
-#define dreplyprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_REPLY)
-
-#define dhsprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_HANDSHAKE)
-
-#define dcprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CONFIG)
-
-#define ddlprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DL)
-
-#define drsprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_RESET)
-
-#define dsprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SCSI)
-
-#define dctlprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_IOCTL)
-
-#define dcsmisasprintk(IOC, CMD)		\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CSMISAS)
-
-#define dsasprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS)
-
-#define dsastransport(IOC, CMD)		\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE)
-
-#define dmfprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_MSG_FRAME)
-
-#define dtsfprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TASK_SET_FULL)
-
-#define dtransportprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TRANSPORT)
-
-#define dTMprintk(IOC, CMD)			\
-	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TARGET_MODE)
-
-/* inline functions for dumping debug data*/
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _debug_dump_mf - print message frame contents
- * @mpi_request: pointer to message frame
- * @sz: number of dwords
- */
-static inline void
-_debug_dump_mf(void *mpi_request, int sz)
-{
-	int i;
-	__le32 *mfp = (__le32 *)mpi_request;
-
-	printk(KERN_INFO "mf:\n\t");
-	for (i = 0; i < sz; i++) {
-		if (i && ((i % 8) == 0))
-			printk("\n\t");
-		printk("%08x ", le32_to_cpu(mfp[i]));
-	}
-	printk("\n");
-}
-#else
-#define _debug_dump_mf(mpi_request, sz)
-#endif /* CONFIG_SCSI_MPT2SAS_LOGGING */
-
-#endif /* MPT2SAS_DEBUG_H_INCLUDED */
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
deleted file mode 100644
index 0ad09b2bf..000000000
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ /dev/null
@@ -1,8855 +0,0 @@
-/*
- * Scsi Host Layer for MPT (Message Passing Technology) based controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c
- * Copyright (C) 2007-2014  LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
- * USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/blkdev.h>
-#include <linux/sched.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/aer.h>
-#include <linux/raid_class.h>
-#include <linux/slab.h>
-
-#include <asm/unaligned.h>
-
-#include "mpt2sas_base.h"
-
-MODULE_AUTHOR(MPT2SAS_AUTHOR);
-MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION);
-MODULE_LICENSE("GPL");
-MODULE_VERSION(MPT2SAS_DRIVER_VERSION);
-
-#define RAID_CHANNEL 1
-
-/* forward proto's */
-static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
-    struct _sas_node *sas_expander);
-static void _firmware_event_work(struct work_struct *work);
-
-static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-
-static void _scsih_scan_start(struct Scsi_Host *shost);
-static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time);
-
-/* global parameters */
-LIST_HEAD(mpt2sas_ioc_list);
-/* global ioc lock for list operations */
-DEFINE_SPINLOCK(gioc_lock);
-/* local parameters */
-static u8 scsi_io_cb_idx = -1;
-static u8 tm_cb_idx = -1;
-static u8 ctl_cb_idx = -1;
-static u8 base_cb_idx = -1;
-static u8 port_enable_cb_idx = -1;
-static u8 transport_cb_idx = -1;
-static u8 scsih_cb_idx = -1;
-static u8 config_cb_idx = -1;
-static int mpt_ids;
-
-static u8 tm_tr_cb_idx = -1 ;
-static u8 tm_tr_volume_cb_idx = -1 ;
-static u8 tm_sas_control_cb_idx = -1;
-
-/* command line options */
-static u32 logging_level;
-MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info "
-    "(default=0)");
-
-static ushort max_sectors = 0xFFFF;
-module_param(max_sectors, ushort, 0);
-MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 32767  default=32767");
-
-static int missing_delay[2] = {-1, -1};
-module_param_array(missing_delay, int, NULL, 0);
-MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
-
-/* scsi-mid layer global parmeter is max_report_luns, which is 511 */
-#define MPT2SAS_MAX_LUN (16895)
-static int max_lun = MPT2SAS_MAX_LUN;
-module_param(max_lun, int, 0);
-MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
-
-/* diag_buffer_enable is bitwise
- * bit 0 set = TRACE
- * bit 1 set = SNAPSHOT
- * bit 2 set = EXTENDED
- *
- * Either bit can be set, or both
- */
-static int diag_buffer_enable = -1;
-module_param(diag_buffer_enable, int, 0);
-MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
-	"(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
-
-static int disable_discovery = -1;
-module_param(disable_discovery, int, 0);
-MODULE_PARM_DESC(disable_discovery, " disable discovery ");
-
-/* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
-static int prot_mask = 0;
-module_param(prot_mask, int, 0);
-MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=7 ");
-
-/**
- * struct sense_info - common structure for obtaining sense keys
- * @skey: sense key
- * @asc: additional sense code
- * @ascq: additional sense code qualifier
- */
-struct sense_info {
-	u8 skey;
-	u8 asc;
-	u8 ascq;
-};
-
-
-#define MPT2SAS_TURN_ON_PFA_LED (0xFFFC)
-#define MPT2SAS_PORT_ENABLE_COMPLETE (0xFFFD)
-#define MPT2SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
-/**
- * struct fw_event_work - firmware event struct
- * @list: link list framework
- * @work: work object (ioc->fault_reset_work_q)
- * @cancel_pending_work: flag set during reset handling
- * @ioc: per adapter object
- * @device_handle: device handle
- * @VF_ID: virtual function id
- * @VP_ID: virtual port id
- * @ignore: flag meaning this event has been marked to ignore
- * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h
- * @event_data: reply event data payload follows
- *
- * This object stored on ioc->fw_event_list.
- */
-struct fw_event_work {
-	struct list_head 	list;
-	u8			cancel_pending_work;
-	struct delayed_work	delayed_work;
-	struct MPT2SAS_ADAPTER *ioc;
-	u16			device_handle;
-	u8			VF_ID;
-	u8			VP_ID;
-	u8			ignore;
-	u16			event;
-	struct kref		refcount;
-	char			event_data[0] __aligned(4);
-};
-
-static void fw_event_work_free(struct kref *r)
-{
-	kfree(container_of(r, struct fw_event_work, refcount));
-}
-
-static void fw_event_work_get(struct fw_event_work *fw_work)
-{
-	kref_get(&fw_work->refcount);
-}
-
-static void fw_event_work_put(struct fw_event_work *fw_work)
-{
-	kref_put(&fw_work->refcount, fw_event_work_free);
-}
-
-static struct fw_event_work *alloc_fw_event_work(int len)
-{
-	struct fw_event_work *fw_event;
-
-	fw_event = kzalloc(sizeof(*fw_event) + len, GFP_ATOMIC);
-	if (!fw_event)
-		return NULL;
-
-	kref_init(&fw_event->refcount);
-	return fw_event;
-}
-
-/* raid transport support */
-static struct raid_template *mpt2sas_raid_template;
-
-/**
- * struct _scsi_io_transfer - scsi io transfer
- * @handle: sas device handle (assigned by firmware)
- * @is_raid: flag set for hidden raid components
- * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE,
- * @data_length: data transfer length
- * @data_dma: dma pointer to data
- * @sense: sense data
- * @lun: lun number
- * @cdb_length: cdb length
- * @cdb: cdb contents
- * @timeout: timeout for this command
- * @VF_ID: virtual function id
- * @VP_ID: virtual port id
- * @valid_reply: flag set for reply message
- * @sense_length: sense length
- * @ioc_status: ioc status
- * @scsi_state: scsi state
- * @scsi_status: scsi staus
- * @log_info: log information
- * @transfer_length: data length transfer when there is a reply message
- *
- * Used for sending internal scsi commands to devices within this module.
- * Refer to _scsi_send_scsi_io().
- */
-struct _scsi_io_transfer {
-	u16	handle;
-	u8	is_raid;
-	enum dma_data_direction dir;
-	u32	data_length;
-	dma_addr_t data_dma;
-	u8 	sense[SCSI_SENSE_BUFFERSIZE];
-	u32	lun;
-	u8	cdb_length;
-	u8	cdb[32];
-	u8	timeout;
-	u8	VF_ID;
-	u8	VP_ID;
-	u8	valid_reply;
-  /* the following bits are only valid when 'valid_reply = 1' */
-	u32	sense_length;
-	u16	ioc_status;
-	u8	scsi_state;
-	u8	scsi_status;
-	u32	log_info;
-	u32	transfer_length;
-};
-
-/*
- * The pci device ids are defined in mpi/mpi2_cnfg.h.
- */
-static struct pci_device_id scsih_pci_table[] = {
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Falcon ~ 2008*/
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Liberator ~ 2108 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Meteor ~ 2116 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Thunderbolt ~ 2208 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Mustang ~ 2308 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* SSS6200 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{0}	/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(pci, scsih_pci_table);
-
-/**
- * _scsih_set_debug_level - global setting of ioc->logging_level.
- *
- * Note: The logging levels are defined in mpt2sas_debug.h.
- */
-static int
-_scsih_set_debug_level(const char *val, struct kernel_param *kp)
-{
-	int ret = param_set_int(val, kp);
-	struct MPT2SAS_ADAPTER *ioc;
-
-	if (ret)
-		return ret;
-
-	printk(KERN_INFO "setting logging_level(0x%08x)\n", logging_level);
-	spin_lock(&gioc_lock);
-	list_for_each_entry(ioc, &mpt2sas_ioc_list, list)
-		ioc->logging_level = logging_level;
-	spin_unlock(&gioc_lock);
-	return 0;
-}
-module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
-    &logging_level, 0644);
-
-/**
- * _scsih_srch_boot_sas_address - search based on sas_address
- * @sas_address: sas address
- * @boot_device: boot device object from bios page 2
- *
- * Returns 1 when there's a match, 0 means no match.
- */
-static inline int
-_scsih_srch_boot_sas_address(u64 sas_address,
-    Mpi2BootDeviceSasWwid_t *boot_device)
-{
-	return (sas_address == le64_to_cpu(boot_device->SASAddress)) ?  1 : 0;
-}
-
-/**
- * _scsih_srch_boot_device_name - search based on device name
- * @device_name: device name specified in INDENTIFY fram
- * @boot_device: boot device object from bios page 2
- *
- * Returns 1 when there's a match, 0 means no match.
- */
-static inline int
-_scsih_srch_boot_device_name(u64 device_name,
-    Mpi2BootDeviceDeviceName_t *boot_device)
-{
-	return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0;
-}
-
-/**
- * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot
- * @enclosure_logical_id: enclosure logical id
- * @slot_number: slot number
- * @boot_device: boot device object from bios page 2
- *
- * Returns 1 when there's a match, 0 means no match.
- */
-static inline int
-_scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number,
-    Mpi2BootDeviceEnclosureSlot_t *boot_device)
-{
-	return (enclosure_logical_id == le64_to_cpu(boot_device->
-	    EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device->
-	    SlotNumber)) ? 1 : 0;
-}
-
-/**
- * _scsih_is_boot_device - search for matching boot device.
- * @sas_address: sas address
- * @device_name: device name specified in INDENTIFY fram
- * @enclosure_logical_id: enclosure logical id
- * @slot_number: slot number
- * @form: specifies boot device form
- * @boot_device: boot device object from bios page 2
- *
- * Returns 1 when there's a match, 0 means no match.
- */
-static int
-_scsih_is_boot_device(u64 sas_address, u64 device_name,
-    u64 enclosure_logical_id, u16 slot, u8 form,
-    Mpi2BiosPage2BootDevice_t *boot_device)
-{
-	int rc = 0;
-
-	switch (form) {
-	case MPI2_BIOSPAGE2_FORM_SAS_WWID:
-		if (!sas_address)
-			break;
-		rc = _scsih_srch_boot_sas_address(
-		    sas_address, &boot_device->SasWwid);
-		break;
-	case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT:
-		if (!enclosure_logical_id)
-			break;
-		rc = _scsih_srch_boot_encl_slot(
-		    enclosure_logical_id,
-		    slot, &boot_device->EnclosureSlot);
-		break;
-	case MPI2_BIOSPAGE2_FORM_DEVICE_NAME:
-		if (!device_name)
-			break;
-		rc = _scsih_srch_boot_device_name(
-		    device_name, &boot_device->DeviceName);
-		break;
-	case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED:
-		break;
-	}
-
-	return rc;
-}
-
-/**
- * _scsih_get_sas_address - set the sas_address for given device handle
- * @handle: device handle
- * @sas_address: sas address
- *
- * Returns 0 success, non-zero when failure
- */
-static int
-_scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle,
-    u64 *sas_address)
-{
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	Mpi2ConfigReply_t mpi_reply;
-	u32 ioc_status;
-	*sas_address = 0;
-
-	if (handle <= ioc->sas_hba.num_phys) {
-		*sas_address = ioc->sas_hba.sas_address;
-		return 0;
-	}
-
-	if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
-	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
-		__FILE__, __LINE__, __func__);
-		return -ENXIO;
-	}
-
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
-	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
-		*sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
-		return 0;
-	}
-
-	/* we hit this becuase the given parent handle doesn't exist */
-	if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-		return -ENXIO;
-	/* else error case */
-	printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x), "
-	    "failure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
-	     __FILE__, __LINE__, __func__);
-	return -EIO;
-}
-
-/**
- * _scsih_determine_boot_device - determine boot device.
- * @ioc: per adapter object
- * @device: either sas_device or raid_device object
- * @is_raid: [flag] 1 = raid object, 0 = sas object
- *
- * Determines whether this device should be first reported device to
- * to scsi-ml or sas transport, this purpose is for persistent boot device.
- * There are primary, alternate, and current entries in bios page 2. The order
- * priority is primary, alternate, then current.  This routine saves
- * the corresponding device object and is_raid flag in the ioc object.
- * The saved data to be used later in _scsih_probe_boot_devices().
- */
-static void
-_scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc,
-    void *device, u8 is_raid)
-{
-	struct _sas_device *sas_device;
-	struct _raid_device *raid_device;
-	u64 sas_address;
-	u64 device_name;
-	u64 enclosure_logical_id;
-	u16 slot;
-
-	 /* only process this function when driver loads */
-	if (!ioc->is_driver_loading)
-		return;
-
-	 /* no Bios, return immediately */
-	if (!ioc->bios_pg3.BiosVersion)
-		return;
-
-	if (!is_raid) {
-		sas_device = device;
-		sas_address = sas_device->sas_address;
-		device_name = sas_device->device_name;
-		enclosure_logical_id = sas_device->enclosure_logical_id;
-		slot = sas_device->slot;
-	} else {
-		raid_device = device;
-		sas_address = raid_device->wwid;
-		device_name = 0;
-		enclosure_logical_id = 0;
-		slot = 0;
-	}
-
-	if (!ioc->req_boot_device.device) {
-		if (_scsih_is_boot_device(sas_address, device_name,
-		    enclosure_logical_id, slot,
-		    (ioc->bios_pg2.ReqBootDeviceForm &
-		    MPI2_BIOSPAGE2_FORM_MASK),
-		    &ioc->bios_pg2.RequestedBootDevice)) {
-			dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
-			   "%s: req_boot_device(0x%016llx)\n",
-			    ioc->name, __func__,
-			    (unsigned long long)sas_address));
-			ioc->req_boot_device.device = device;
-			ioc->req_boot_device.is_raid = is_raid;
-		}
-	}
-
-	if (!ioc->req_alt_boot_device.device) {
-		if (_scsih_is_boot_device(sas_address, device_name,
-		    enclosure_logical_id, slot,
-		    (ioc->bios_pg2.ReqAltBootDeviceForm &
-		    MPI2_BIOSPAGE2_FORM_MASK),
-		    &ioc->bios_pg2.RequestedAltBootDevice)) {
-			dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
-			   "%s: req_alt_boot_device(0x%016llx)\n",
-			    ioc->name, __func__,
-			    (unsigned long long)sas_address));
-			ioc->req_alt_boot_device.device = device;
-			ioc->req_alt_boot_device.is_raid = is_raid;
-		}
-	}
-
-	if (!ioc->current_boot_device.device) {
-		if (_scsih_is_boot_device(sas_address, device_name,
-		    enclosure_logical_id, slot,
-		    (ioc->bios_pg2.CurrentBootDeviceForm &
-		    MPI2_BIOSPAGE2_FORM_MASK),
-		    &ioc->bios_pg2.CurrentBootDevice)) {
-			dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
-			   "%s: current_boot_device(0x%016llx)\n",
-			    ioc->name, __func__,
-			    (unsigned long long)sas_address));
-			ioc->current_boot_device.device = device;
-			ioc->current_boot_device.is_raid = is_raid;
-		}
-	}
-}
-
-static struct _sas_device *
-__mpt2sas_get_sdev_from_target(struct MPT2SAS_ADAPTER *ioc,
-		struct MPT2SAS_TARGET *tgt_priv)
-{
-	struct _sas_device *ret;
-
-	assert_spin_locked(&ioc->sas_device_lock);
-
-	ret = tgt_priv->sdev;
-	if (ret)
-		sas_device_get(ret);
-
-	return ret;
-}
-
-static struct _sas_device *
-mpt2sas_get_sdev_from_target(struct MPT2SAS_ADAPTER *ioc,
-		struct MPT2SAS_TARGET *tgt_priv)
-{
-	struct _sas_device *ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	ret = __mpt2sas_get_sdev_from_target(ioc, tgt_priv);
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	return ret;
-}
-
-
-struct _sas_device *
-__mpt2sas_get_sdev_by_addr(struct MPT2SAS_ADAPTER *ioc,
-    u64 sas_address)
-{
-	struct _sas_device *sas_device;
-
-	assert_spin_locked(&ioc->sas_device_lock);
-
-	list_for_each_entry(sas_device, &ioc->sas_device_list, list)
-		if (sas_device->sas_address == sas_address)
-			goto found_device;
-
-	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
-		if (sas_device->sas_address == sas_address)
-			goto found_device;
-
-	return NULL;
-
-found_device:
-	sas_device_get(sas_device);
-	return sas_device;
-}
-
-/**
- * mpt2sas_get_sdev_by_addr - sas device search
- * @ioc: per adapter object
- * @sas_address: sas address
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for sas_device based on sas_address, then return sas_device
- * object.
- */
-struct _sas_device *
-mpt2sas_get_sdev_by_addr(struct MPT2SAS_ADAPTER *ioc,
-    u64 sas_address)
-{
-	struct _sas_device *sas_device;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_by_addr(ioc,
-			sas_address);
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	return sas_device;
-}
-
-static struct _sas_device *
-__mpt2sas_get_sdev_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct _sas_device *sas_device;
-
-	assert_spin_locked(&ioc->sas_device_lock);
-
-	list_for_each_entry(sas_device, &ioc->sas_device_list, list)
-		if (sas_device->handle == handle)
-			goto found_device;
-
-	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
-		if (sas_device->handle == handle)
-			goto found_device;
-
-	return NULL;
-
-found_device:
-	sas_device_get(sas_device);
-	return sas_device;
-}
-
-/**
- * mpt2sas_get_sdev_by_handle - sas device search
- * @ioc: per adapter object
- * @handle: sas device handle (assigned by firmware)
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for sas_device based on sas_address, then return sas_device
- * object.
- */
-static struct _sas_device *
-mpt2sas_get_sdev_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct _sas_device *sas_device;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	return sas_device;
-}
-
-/**
- * _scsih_sas_device_remove - remove sas_device from list.
- * @ioc: per adapter object
- * @sas_device: the sas_device object
- * Context: This function will acquire ioc->sas_device_lock.
- *
- * If sas_device is on the list, remove it and decrement its reference count.
- */
-static void
-_scsih_sas_device_remove(struct MPT2SAS_ADAPTER *ioc,
-    struct _sas_device *sas_device)
-{
-	unsigned long flags;
-
-	if (!sas_device)
-		return;
-
-	/*
-	 * The lock serializes access to the list, but we still need to verify
-	 * that nobody removed the entry while we were waiting on the lock.
-	 */
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	if (!list_empty(&sas_device->list)) {
-		list_del_init(&sas_device->list);
-		sas_device_put(sas_device);
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-}
-
-
-/**
- * _scsih_sas_device_add - insert sas_device to the list.
- * @ioc: per adapter object
- * @sas_device: the sas_device object
- * Context: This function will acquire ioc->sas_device_lock.
- *
- * Adding new object to the ioc->sas_device_list.
- */
-static void
-_scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc,
-    struct _sas_device *sas_device)
-{
-	unsigned long flags;
-
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
-	    "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
-	    sas_device->handle, (unsigned long long)sas_device->sas_address));
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device_get(sas_device);
-	list_add_tail(&sas_device->list, &ioc->sas_device_list);
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
-	     sas_device->sas_address_parent)) {
-		_scsih_sas_device_remove(ioc, sas_device);
-	} else if (!sas_device->starget) {
-		/* When asyn scanning is enabled, its not possible to remove
-		 * devices while scanning is turned on due to an oops in
-		 * scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start()
-		 */
-		if (!ioc->is_driver_loading) {
-			mpt2sas_transport_port_remove(ioc,
-			sas_device->sas_address,
-			sas_device->sas_address_parent);
-			_scsih_sas_device_remove(ioc, sas_device);
-		}
-	}
-}
-
-/**
- * _scsih_sas_device_init_add - insert sas_device to the list.
- * @ioc: per adapter object
- * @sas_device: the sas_device object
- * Context: This function will acquire ioc->sas_device_lock.
- *
- * Adding new object at driver load time to the ioc->sas_device_init_list.
- */
-static void
-_scsih_sas_device_init_add(struct MPT2SAS_ADAPTER *ioc,
-    struct _sas_device *sas_device)
-{
-	unsigned long flags;
-
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
-	    "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
-	    sas_device->handle, (unsigned long long)sas_device->sas_address));
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device_get(sas_device);
-	list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
-	_scsih_determine_boot_device(ioc, sas_device, 0);
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-}
-
-/**
- * _scsih_raid_device_find_by_id - raid device search
- * @ioc: per adapter object
- * @id: sas device target id
- * @channel: sas device channel
- * Context: Calling function should acquire ioc->raid_device_lock
- *
- * This searches for raid_device based on target id, then return raid_device
- * object.
- */
-static struct _raid_device *
-_scsih_raid_device_find_by_id(struct MPT2SAS_ADAPTER *ioc, int id, int channel)
-{
-	struct _raid_device *raid_device, *r;
-
-	r = NULL;
-	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
-		if (raid_device->id == id && raid_device->channel == channel) {
-			r = raid_device;
-			goto out;
-		}
-	}
-
- out:
-	return r;
-}
-
-/**
- * _scsih_raid_device_find_by_handle - raid device search
- * @ioc: per adapter object
- * @handle: sas device handle (assigned by firmware)
- * Context: Calling function should acquire ioc->raid_device_lock
- *
- * This searches for raid_device based on handle, then return raid_device
- * object.
- */
-static struct _raid_device *
-_scsih_raid_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct _raid_device *raid_device, *r;
-
-	r = NULL;
-	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
-		if (raid_device->handle != handle)
-			continue;
-		r = raid_device;
-		goto out;
-	}
-
- out:
-	return r;
-}
-
-/**
- * _scsih_raid_device_find_by_wwid - raid device search
- * @ioc: per adapter object
- * @handle: sas device handle (assigned by firmware)
- * Context: Calling function should acquire ioc->raid_device_lock
- *
- * This searches for raid_device based on wwid, then return raid_device
- * object.
- */
-static struct _raid_device *
-_scsih_raid_device_find_by_wwid(struct MPT2SAS_ADAPTER *ioc, u64 wwid)
-{
-	struct _raid_device *raid_device, *r;
-
-	r = NULL;
-	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
-		if (raid_device->wwid != wwid)
-			continue;
-		r = raid_device;
-		goto out;
-	}
-
- out:
-	return r;
-}
-
-/**
- * _scsih_raid_device_add - add raid_device object
- * @ioc: per adapter object
- * @raid_device: raid_device object
- *
- * This is added to the raid_device_list link list.
- */
-static void
-_scsih_raid_device_add(struct MPT2SAS_ADAPTER *ioc,
-    struct _raid_device *raid_device)
-{
-	unsigned long flags;
-
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
-	    "(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
-	    raid_device->handle, (unsigned long long)raid_device->wwid));
-
-	spin_lock_irqsave(&ioc->raid_device_lock, flags);
-	list_add_tail(&raid_device->list, &ioc->raid_device_list);
-	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-}
-
-/**
- * _scsih_raid_device_remove - delete raid_device object
- * @ioc: per adapter object
- * @raid_device: raid_device object
- *
- */
-static void
-_scsih_raid_device_remove(struct MPT2SAS_ADAPTER *ioc,
-    struct _raid_device *raid_device)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->raid_device_lock, flags);
-	list_del(&raid_device->list);
-	kfree(raid_device);
-	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-}
-
-/**
- * mpt2sas_scsih_expander_find_by_handle - expander device search
- * @ioc: per adapter object
- * @handle: expander handle (assigned by firmware)
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for expander device based on handle, then returns the
- * sas_node object.
- */
-struct _sas_node *
-mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct _sas_node *sas_expander, *r;
-
-	r = NULL;
-	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
-		if (sas_expander->handle != handle)
-			continue;
-		r = sas_expander;
-		goto out;
-	}
- out:
-	return r;
-}
-
-/**
- * mpt2sas_scsih_expander_find_by_sas_address - expander device search
- * @ioc: per adapter object
- * @sas_address: sas address
- * Context: Calling function should acquire ioc->sas_node_lock.
- *
- * This searches for expander device based on sas_address, then returns the
- * sas_node object.
- */
-struct _sas_node *
-mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
-    u64 sas_address)
-{
-	struct _sas_node *sas_expander, *r;
-
-	r = NULL;
-	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
-		if (sas_expander->sas_address != sas_address)
-			continue;
-		r = sas_expander;
-		goto out;
-	}
- out:
-	return r;
-}
-
-/**
- * _scsih_expander_node_add - insert expander device to the list.
- * @ioc: per adapter object
- * @sas_expander: the sas_device object
- * Context: This function will acquire ioc->sas_node_lock.
- *
- * Adding new object to the ioc->sas_expander_list.
- *
- * Return nothing.
- */
-static void
-_scsih_expander_node_add(struct MPT2SAS_ADAPTER *ioc,
-    struct _sas_node *sas_expander)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	list_add_tail(&sas_expander->list, &ioc->sas_expander_list);
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-}
-
-/**
- * _scsih_is_end_device - determines if device is an end device
- * @device_info: bitfield providing information about the device.
- * Context: none
- *
- * Returns 1 if end device.
- */
-static int
-_scsih_is_end_device(u32 device_info)
-{
-	if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE &&
-		((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) |
-		(device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) |
-		(device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))
-		return 1;
-	else
-		return 0;
-}
-
-/**
- * _scsih_scsi_lookup_get - returns scmd entry
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns the smid stored scmd pointer.
- */
-static struct scsi_cmnd *
-_scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	return ioc->scsi_lookup[smid - 1].scmd;
-}
-
-/**
- * _scsih_scsi_lookup_get_clear - returns scmd entry
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns the smid stored scmd pointer.
- * Then will derefrence the stored scmd pointer.
- */
-static inline struct scsi_cmnd *
-_scsih_scsi_lookup_get_clear(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	unsigned long flags;
-	struct scsi_cmnd *scmd;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	scmd = ioc->scsi_lookup[smid - 1].scmd;
-	ioc->scsi_lookup[smid - 1].scmd = NULL;
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-
-	return scmd;
-}
-
-/**
- * _scsih_scsi_lookup_find_by_scmd - scmd lookup
- * @ioc: per adapter object
- * @smid: system request message index
- * @scmd: pointer to scsi command object
- * Context: This function will acquire ioc->scsi_lookup_lock.
- *
- * This will search for a scmd pointer in the scsi_lookup array,
- * returning the revelent smid.  A returned value of zero means invalid.
- */
-static u16
-_scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd
-    *scmd)
-{
-	u16 smid;
-	unsigned long	flags;
-	int i;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	smid = 0;
-	for (i = 0; i < ioc->scsiio_depth; i++) {
-		if (ioc->scsi_lookup[i].scmd == scmd) {
-			smid = ioc->scsi_lookup[i].smid;
-			goto out;
-		}
-	}
- out:
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-	return smid;
-}
-
-/**
- * _scsih_scsi_lookup_find_by_target - search for matching channel:id
- * @ioc: per adapter object
- * @id: target id
- * @channel: channel
- * Context: This function will acquire ioc->scsi_lookup_lock.
- *
- * This will search for a matching channel:id in the scsi_lookup array,
- * returning 1 if found.
- */
-static u8
-_scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id,
-    int channel)
-{
-	u8 found;
-	unsigned long	flags;
-	int i;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	found = 0;
-	for (i = 0 ; i < ioc->scsiio_depth; i++) {
-		if (ioc->scsi_lookup[i].scmd &&
-		    (ioc->scsi_lookup[i].scmd->device->id == id &&
-		    ioc->scsi_lookup[i].scmd->device->channel == channel)) {
-			found = 1;
-			goto out;
-		}
-	}
- out:
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-	return found;
-}
-
-/**
- * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
- * @ioc: per adapter object
- * @id: target id
- * @lun: lun number
- * @channel: channel
- * Context: This function will acquire ioc->scsi_lookup_lock.
- *
- * This will search for a matching channel:id:lun in the scsi_lookup array,
- * returning 1 if found.
- */
-static u8
-_scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id,
-    unsigned int lun, int channel)
-{
-	u8 found;
-	unsigned long	flags;
-	int i;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	found = 0;
-	for (i = 0 ; i < ioc->scsiio_depth; i++) {
-		if (ioc->scsi_lookup[i].scmd &&
-		    (ioc->scsi_lookup[i].scmd->device->id == id &&
-		    ioc->scsi_lookup[i].scmd->device->channel == channel &&
-		    ioc->scsi_lookup[i].scmd->device->lun == lun)) {
-			found = 1;
-			goto out;
-		}
-	}
- out:
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-	return found;
-}
-
-/**
- * _scsih_get_chain_buffer_tracker - obtain chain tracker
- * @ioc: per adapter object
- * @smid: smid associated to an IO request
- *
- * Returns chain tracker(from ioc->free_chain_list)
- */
-static struct chain_tracker *
-_scsih_get_chain_buffer_tracker(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	struct chain_tracker *chain_req;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	if (list_empty(&ioc->free_chain_list)) {
-		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT "chain buffers not "
-			"available\n", ioc->name));
-		return NULL;
-	}
-	chain_req = list_entry(ioc->free_chain_list.next,
-	    struct chain_tracker, tracker_list);
-	list_del_init(&chain_req->tracker_list);
-	list_add_tail(&chain_req->tracker_list,
-	    &ioc->scsi_lookup[smid - 1].chain_list);
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-	return chain_req;
-}
-
-/**
- * _scsih_build_scatter_gather - main sg creation routine
- * @ioc: per adapter object
- * @scmd: scsi command
- * @smid: system request message index
- * Context: none.
- *
- * The main routine that builds scatter gather table from a given
- * scsi request sent via the .queuecommand main handler.
- *
- * Returns 0 success, anything else error
- */
-static int
-_scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
-    struct scsi_cmnd *scmd, u16 smid)
-{
-	Mpi2SCSIIORequest_t *mpi_request;
-	dma_addr_t chain_dma;
-	struct scatterlist *sg_scmd;
-	void *sg_local, *chain;
-	u32 chain_offset;
-	u32 chain_length;
-	u32 chain_flags;
-	int sges_left;
-	u32 sges_in_segment;
-	u32 sgl_flags;
-	u32 sgl_flags_last_element;
-	u32 sgl_flags_end_buffer;
-	struct chain_tracker *chain_req;
-
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-
-	/* init scatter gather flags */
-	sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT;
-	if (scmd->sc_data_direction == DMA_TO_DEVICE)
-		sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC;
-	sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT)
-	    << MPI2_SGE_FLAGS_SHIFT;
-	sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT |
-	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST)
-	    << MPI2_SGE_FLAGS_SHIFT;
-	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-
-	sg_scmd = scsi_sglist(scmd);
-	sges_left = scsi_dma_map(scmd);
-	if (sges_left < 0) {
-		sdev_printk(KERN_ERR, scmd->device, "pci_map_sg"
-		" failed: request for %d bytes!\n", scsi_bufflen(scmd));
-		return -ENOMEM;
-	}
-
-	sg_local = &mpi_request->SGL;
-	sges_in_segment = ioc->max_sges_in_main_message;
-	if (sges_left <= sges_in_segment)
-		goto fill_in_last_segment;
-
-	mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) +
-	    (sges_in_segment * ioc->sge_size))/4;
-
-	/* fill in main message segment when there is a chain following */
-	while (sges_in_segment) {
-		if (sges_in_segment == 1)
-			ioc->base_add_sg_single(sg_local,
-			    sgl_flags_last_element | sg_dma_len(sg_scmd),
-			    sg_dma_address(sg_scmd));
-		else
-			ioc->base_add_sg_single(sg_local, sgl_flags |
-			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
-		sg_scmd = sg_next(sg_scmd);
-		sg_local += ioc->sge_size;
-		sges_left--;
-		sges_in_segment--;
-	}
-
-	/* initializing the chain flags and pointers */
-	chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
-	chain_req = _scsih_get_chain_buffer_tracker(ioc, smid);
-	if (!chain_req)
-		return -1;
-	chain = chain_req->chain_buffer;
-	chain_dma = chain_req->chain_buffer_dma;
-	do {
-		sges_in_segment = (sges_left <=
-		    ioc->max_sges_in_chain_message) ? sges_left :
-		    ioc->max_sges_in_chain_message;
-		chain_offset = (sges_left == sges_in_segment) ?
-		    0 : (sges_in_segment * ioc->sge_size)/4;
-		chain_length = sges_in_segment * ioc->sge_size;
-		if (chain_offset) {
-			chain_offset = chain_offset <<
-			    MPI2_SGE_CHAIN_OFFSET_SHIFT;
-			chain_length += ioc->sge_size;
-		}
-		ioc->base_add_sg_single(sg_local, chain_flags | chain_offset |
-		    chain_length, chain_dma);
-		sg_local = chain;
-		if (!chain_offset)
-			goto fill_in_last_segment;
-
-		/* fill in chain segments */
-		while (sges_in_segment) {
-			if (sges_in_segment == 1)
-				ioc->base_add_sg_single(sg_local,
-				    sgl_flags_last_element |
-				    sg_dma_len(sg_scmd),
-				    sg_dma_address(sg_scmd));
-			else
-				ioc->base_add_sg_single(sg_local, sgl_flags |
-				    sg_dma_len(sg_scmd),
-				    sg_dma_address(sg_scmd));
-			sg_scmd = sg_next(sg_scmd);
-			sg_local += ioc->sge_size;
-			sges_left--;
-			sges_in_segment--;
-		}
-
-		chain_req = _scsih_get_chain_buffer_tracker(ioc, smid);
-		if (!chain_req)
-			return -1;
-		chain = chain_req->chain_buffer;
-		chain_dma = chain_req->chain_buffer_dma;
-	} while (1);
-
-
- fill_in_last_segment:
-
-	/* fill the last segment */
-	while (sges_left) {
-		if (sges_left == 1)
-			ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer |
-			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
-		else
-			ioc->base_add_sg_single(sg_local, sgl_flags |
-			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
-		sg_scmd = sg_next(sg_scmd);
-		sg_local += ioc->sge_size;
-		sges_left--;
-	}
-
-	return 0;
-}
-
-/**
- * _scsih_change_queue_depth - setting device queue depth
- * @sdev: scsi device struct
- * @qdepth: requested queue depth
- *
- * Returns queue depth.
- */
-static int
-_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
-{
-	struct Scsi_Host *shost = sdev->host;
-	int max_depth;
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	struct _sas_device *sas_device;
-	unsigned long flags;
-
-	max_depth = shost->can_queue;
-
-	/* limit max device queue for SATA to 32 */
-	sas_device_priv_data = sdev->hostdata;
-	if (!sas_device_priv_data)
-		goto not_sata;
-	sas_target_priv_data = sas_device_priv_data->sas_target;
-	if (!sas_target_priv_data)
-		goto not_sata;
-	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
-		goto not_sata;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_from_target(ioc, sas_target_priv_data);
-	if (sas_device) {
-		if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
-			max_depth = MPT2SAS_SATA_QUEUE_DEPTH;
-
-		sas_device_put(sas_device);
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- not_sata:
-	if (!sdev->tagged_supported)
-		max_depth = 1;
-	if (qdepth > max_depth)
-		qdepth = max_depth;
-	return scsi_change_queue_depth(sdev, qdepth);
-}
-
-/**
- * _scsih_target_alloc - target add routine
- * @starget: scsi target struct
- *
- * Returns 0 if ok. Any other return is assumed to be an error and
- * the device is ignored.
- */
-static int
-_scsih_target_alloc(struct scsi_target *starget)
-{
-	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	struct _sas_device *sas_device;
-	struct _raid_device *raid_device;
-	unsigned long flags;
-	struct sas_rphy *rphy;
-
-	sas_target_priv_data = kzalloc(sizeof(*sas_target_priv_data),
-				       GFP_KERNEL);
-	if (!sas_target_priv_data)
-		return -ENOMEM;
-
-	starget->hostdata = sas_target_priv_data;
-	sas_target_priv_data->starget = starget;
-	sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
-
-	/* RAID volumes */
-	if (starget->channel == RAID_CHANNEL) {
-		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
-		    starget->channel);
-		if (raid_device) {
-			sas_target_priv_data->handle = raid_device->handle;
-			sas_target_priv_data->sas_address = raid_device->wwid;
-			sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
-			if (ioc->is_warpdrive)
-				sas_target_priv_data->raid_device = raid_device;
-			raid_device->starget = starget;
-		}
-		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-		return 0;
-	}
-
-	/* sas/sata devices */
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	rphy = dev_to_rphy(starget->dev.parent);
-	sas_device = __mpt2sas_get_sdev_by_addr(ioc,
-	   rphy->identify.sas_address);
-
-	if (sas_device) {
-		sas_target_priv_data->handle = sas_device->handle;
-		sas_target_priv_data->sas_address = sas_device->sas_address;
-		sas_target_priv_data->sdev = sas_device;
-		sas_device->starget = starget;
-		sas_device->id = starget->id;
-		sas_device->channel = starget->channel;
-		if (test_bit(sas_device->handle, ioc->pd_handles))
-			sas_target_priv_data->flags |=
-			    MPT_TARGET_FLAGS_RAID_COMPONENT;
-
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	return 0;
-}
-
-/**
- * _scsih_target_destroy - target destroy routine
- * @starget: scsi target struct
- *
- * Returns nothing.
- */
-static void
-_scsih_target_destroy(struct scsi_target *starget)
-{
-	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	struct _sas_device *sas_device;
-	struct _raid_device *raid_device;
-	unsigned long flags;
-	struct sas_rphy *rphy;
-
-	sas_target_priv_data = starget->hostdata;
-	if (!sas_target_priv_data)
-		return;
-
-	if (starget->channel == RAID_CHANNEL) {
-		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
-		    starget->channel);
-		if (raid_device) {
-			raid_device->starget = NULL;
-			raid_device->sdev = NULL;
-		}
-		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-		goto out;
-	}
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	rphy = dev_to_rphy(starget->dev.parent);
-	sas_device = __mpt2sas_get_sdev_from_target(ioc, sas_target_priv_data);
-	if (sas_device && (sas_device->starget == starget) &&
-	    (sas_device->id == starget->id) &&
-	    (sas_device->channel == starget->channel))
-		sas_device->starget = NULL;
-
-	if (sas_device) {
-		/*
-		 * Corresponding get() is in _scsih_target_alloc()
-		 */
-		sas_target_priv_data->sdev = NULL;
-		sas_device_put(sas_device);
-
-		sas_device_put(sas_device);
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
- out:
-	kfree(sas_target_priv_data);
-	starget->hostdata = NULL;
-}
-
-/**
- * _scsih_slave_alloc - device add routine
- * @sdev: scsi device struct
- *
- * Returns 0 if ok. Any other return is assumed to be an error and
- * the device is ignored.
- */
-static int
-_scsih_slave_alloc(struct scsi_device *sdev)
-{
-	struct Scsi_Host *shost;
-	struct MPT2SAS_ADAPTER *ioc;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct scsi_target *starget;
-	struct _raid_device *raid_device;
-	struct _sas_device *sas_device;
-	unsigned long flags;
-
-	sas_device_priv_data = kzalloc(sizeof(*sas_device_priv_data),
-				       GFP_KERNEL);
-	if (!sas_device_priv_data)
-		return -ENOMEM;
-
-	sas_device_priv_data->lun = sdev->lun;
-	sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT;
-
-	starget = scsi_target(sdev);
-	sas_target_priv_data = starget->hostdata;
-	sas_target_priv_data->num_luns++;
-	sas_device_priv_data->sas_target = sas_target_priv_data;
-	sdev->hostdata = sas_device_priv_data;
-	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT))
-		sdev->no_uld_attach = 1;
-
-	shost = dev_to_shost(&starget->dev);
-	ioc = shost_priv(shost);
-	if (starget->channel == RAID_CHANNEL) {
-		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		raid_device = _scsih_raid_device_find_by_id(ioc,
-		    starget->id, starget->channel);
-		if (raid_device)
-			raid_device->sdev = sdev; /* raid is single lun */
-		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-	}
-
-	if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = __mpt2sas_get_sdev_by_addr(ioc,
-				sas_target_priv_data->sas_address);
-		if (sas_device && (sas_device->starget == NULL)) {
-			sdev_printk(KERN_INFO, sdev,
-			     "%s : sas_device->starget set to starget @ %d\n",
-			     __func__, __LINE__);
-			sas_device->starget = starget;
-		}
-
-		if (sas_device)
-			sas_device_put(sas_device);
-
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	}
-
-	return 0;
-}
-
-/**
- * _scsih_slave_destroy - device destroy routine
- * @sdev: scsi device struct
- *
- * Returns nothing.
- */
-static void
-_scsih_slave_destroy(struct scsi_device *sdev)
-{
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	struct scsi_target *starget;
-	struct Scsi_Host *shost;
-	struct MPT2SAS_ADAPTER *ioc;
-	struct _sas_device *sas_device;
-	unsigned long flags;
-
-	if (!sdev->hostdata)
-		return;
-
-	starget = scsi_target(sdev);
-	sas_target_priv_data = starget->hostdata;
-	sas_target_priv_data->num_luns--;
-
-	shost = dev_to_shost(&starget->dev);
-	ioc = shost_priv(shost);
-
-	if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = __mpt2sas_get_sdev_from_target(ioc,
-				sas_target_priv_data);
-		if (sas_device && !sas_target_priv_data->num_luns)
-			sas_device->starget = NULL;
-
-		if (sas_device)
-			sas_device_put(sas_device);
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	}
-
-	kfree(sdev->hostdata);
-	sdev->hostdata = NULL;
-}
-
-/**
- * _scsih_display_sata_capabilities - sata capabilities
- * @ioc: per adapter object
- * @handle: device handle
- * @sdev: scsi device struct
- */
-static void
-_scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
-	u16 handle, struct scsi_device *sdev)
-{
-	Mpi2ConfigReply_t mpi_reply;
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	u32 ioc_status;
-	u16 flags;
-	u32 device_info;
-
-	if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
-	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
-	}
-
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
-	}
-
-	flags = le16_to_cpu(sas_device_pg0.Flags);
-	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
-
-	sdev_printk(KERN_INFO, sdev,
-	    "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), "
-	    "sw_preserve(%s)\n",
-	    (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n",
-	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n",
-	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" :
-	    "n",
-	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n",
-	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n",
-	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n");
-}
-
-/**
- * _scsih_is_raid - return boolean indicating device is raid volume
- * @dev the device struct object
- */
-static int
-_scsih_is_raid(struct device *dev)
-{
-	struct scsi_device *sdev = to_scsi_device(dev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
-
-	if (ioc->is_warpdrive)
-		return 0;
-	return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
-}
-
-/**
- * _scsih_get_resync - get raid volume resync percent complete
- * @dev the device struct object
- */
-static void
-_scsih_get_resync(struct device *dev)
-{
-	struct scsi_device *sdev = to_scsi_device(dev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
-	static struct _raid_device *raid_device;
-	unsigned long flags;
-	Mpi2RaidVolPage0_t vol_pg0;
-	Mpi2ConfigReply_t mpi_reply;
-	u32 volume_status_flags;
-	u8 percent_complete;
-	u16 handle;
-
-	percent_complete = 0;
-	handle = 0;
-	if (ioc->is_warpdrive)
-		goto out;
-
-	spin_lock_irqsave(&ioc->raid_device_lock, flags);
-	raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
-	    sdev->channel);
-	if (raid_device) {
-		handle = raid_device->handle;
-		percent_complete = raid_device->percent_complete;
-	}
-	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-
-	if (!handle)
-		goto out;
-
-	if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
-	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
-	     sizeof(Mpi2RaidVolPage0_t))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		percent_complete = 0;
-		goto out;
-	}
-
-	volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags);
-	if (!(volume_status_flags &
-	    MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS))
-		percent_complete = 0;
-
- out:
-	raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
-}
-
-/**
- * _scsih_get_state - get raid volume level
- * @dev the device struct object
- */
-static void
-_scsih_get_state(struct device *dev)
-{
-	struct scsi_device *sdev = to_scsi_device(dev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
-	static struct _raid_device *raid_device;
-	unsigned long flags;
-	Mpi2RaidVolPage0_t vol_pg0;
-	Mpi2ConfigReply_t mpi_reply;
-	u32 volstate;
-	enum raid_state state = RAID_STATE_UNKNOWN;
-	u16 handle = 0;
-
-	spin_lock_irqsave(&ioc->raid_device_lock, flags);
-	raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
-	    sdev->channel);
-	if (raid_device)
-		handle = raid_device->handle;
-	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-
-	if (!raid_device)
-		goto out;
-
-	if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
-	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
-	     sizeof(Mpi2RaidVolPage0_t))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-
-	volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags);
-	if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
-		state = RAID_STATE_RESYNCING;
-		goto out;
-	}
-
-	switch (vol_pg0.VolumeState) {
-	case MPI2_RAID_VOL_STATE_OPTIMAL:
-	case MPI2_RAID_VOL_STATE_ONLINE:
-		state = RAID_STATE_ACTIVE;
-		break;
-	case  MPI2_RAID_VOL_STATE_DEGRADED:
-		state = RAID_STATE_DEGRADED;
-		break;
-	case MPI2_RAID_VOL_STATE_FAILED:
-	case MPI2_RAID_VOL_STATE_MISSING:
-		state = RAID_STATE_OFFLINE;
-		break;
-	}
- out:
-	raid_set_state(mpt2sas_raid_template, dev, state);
-}
-
-/**
- * _scsih_set_level - set raid level
- * @sdev: scsi device struct
- * @volume_type: volume type
- */
-static void
-_scsih_set_level(struct scsi_device *sdev, u8 volume_type)
-{
-	enum raid_level level = RAID_LEVEL_UNKNOWN;
-
-	switch (volume_type) {
-	case MPI2_RAID_VOL_TYPE_RAID0:
-		level = RAID_LEVEL_0;
-		break;
-	case MPI2_RAID_VOL_TYPE_RAID10:
-		level = RAID_LEVEL_10;
-		break;
-	case MPI2_RAID_VOL_TYPE_RAID1E:
-		level = RAID_LEVEL_1E;
-		break;
-	case MPI2_RAID_VOL_TYPE_RAID1:
-		level = RAID_LEVEL_1;
-		break;
-	}
-
-	raid_set_level(mpt2sas_raid_template, &sdev->sdev_gendev, level);
-}
-
-/**
- * _scsih_get_volume_capabilities - volume capabilities
- * @ioc: per adapter object
- * @sas_device: the raid_device object
- *
- * Returns 0 for success, else 1
- */
-static int
-_scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
-    struct _raid_device *raid_device)
-{
-	Mpi2RaidVolPage0_t *vol_pg0;
-	Mpi2RaidPhysDiskPage0_t pd_pg0;
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	Mpi2ConfigReply_t mpi_reply;
-	u16 sz;
-	u8 num_pds;
-
-	if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
-	    &num_pds)) || !num_pds) {
-		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
-		    __func__));
-		return 1;
-	}
-
-	raid_device->num_pds = num_pds;
-	sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
-	    sizeof(Mpi2RaidVol0PhysDisk_t));
-	vol_pg0 = kzalloc(sz, GFP_KERNEL);
-	if (!vol_pg0) {
-		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
-		    __func__));
-		return 1;
-	}
-
-	if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
-	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
-		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
-		    __func__));
-		kfree(vol_pg0);
-		return 1;
-	}
-
-	raid_device->volume_type = vol_pg0->VolumeType;
-
-	/* figure out what the underlying devices are by
-	 * obtaining the device_info bits for the 1st device
-	 */
-	if (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
-	    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
-	    vol_pg0->PhysDisk[0].PhysDiskNum))) {
-		if (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
-		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
-		    le16_to_cpu(pd_pg0.DevHandle)))) {
-			raid_device->device_info =
-			    le32_to_cpu(sas_device_pg0.DeviceInfo);
-		}
-	}
-
-	kfree(vol_pg0);
-	return 0;
-}
-/**
- * _scsih_disable_ddio - Disable direct I/O for all the volumes
- * @ioc: per adapter object
- */
-static void
-_scsih_disable_ddio(struct MPT2SAS_ADAPTER *ioc)
-{
-	Mpi2RaidVolPage1_t vol_pg1;
-	Mpi2ConfigReply_t mpi_reply;
-	struct _raid_device *raid_device;
-	u16 handle;
-	u16 ioc_status;
-	unsigned long flags;
-
-	handle = 0xFFFF;
-	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
-	    &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-			break;
-		handle = le16_to_cpu(vol_pg1.DevHandle);
-		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
-		if (raid_device)
-			raid_device->direct_io_enabled = 0;
-		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-	}
-	return;
-}
-
-
-/**
- * _scsih_get_num_volumes - Get number of volumes in the ioc
- * @ioc: per adapter object
- */
-static u8
-_scsih_get_num_volumes(struct MPT2SAS_ADAPTER *ioc)
-{
-	Mpi2RaidVolPage1_t vol_pg1;
-	Mpi2ConfigReply_t mpi_reply;
-	u16 handle;
-	u8 vol_cnt = 0;
-	u16 ioc_status;
-
-	handle = 0xFFFF;
-	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
-	    &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-			break;
-		vol_cnt++;
-		handle = le16_to_cpu(vol_pg1.DevHandle);
-	}
-	return vol_cnt;
-}
-
-
-/**
- * _scsih_init_warpdrive_properties - Set properties for warpdrive direct I/O.
- * @ioc: per adapter object
- * @raid_device: the raid_device object
- */
-static void
-_scsih_init_warpdrive_properties(struct MPT2SAS_ADAPTER *ioc,
-	struct _raid_device *raid_device)
-{
-	Mpi2RaidVolPage0_t *vol_pg0;
-	Mpi2RaidPhysDiskPage0_t pd_pg0;
-	Mpi2ConfigReply_t mpi_reply;
-	u16 sz;
-	u8 num_pds, count;
-	unsigned long stripe_sz, block_sz;
-	u8 stripe_exp, block_exp;
-	u64 dev_max_lba;
-
-	if (!ioc->is_warpdrive)
-		return;
-
-	if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS) {
-		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
-		    "globally as drives are exposed\n", ioc->name);
-		return;
-	}
-	if (_scsih_get_num_volumes(ioc) > 1) {
-		_scsih_disable_ddio(ioc);
-		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
-		    "globally as number of drives > 1\n", ioc->name);
-		return;
-	}
-	if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
-	    &num_pds)) || !num_pds) {
-		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
-		    "Failure in computing number of drives\n", ioc->name);
-		return;
-	}
-
-	sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
-	    sizeof(Mpi2RaidVol0PhysDisk_t));
-	vol_pg0 = kzalloc(sz, GFP_KERNEL);
-	if (!vol_pg0) {
-		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
-		    "Memory allocation failure for RVPG0\n", ioc->name);
-		return;
-	}
-
-	if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
-	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
-		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
-		    "Failure in retrieving RVPG0\n", ioc->name);
-		kfree(vol_pg0);
-		return;
-	}
-
-	/*
-	 * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
-	 * assumed for WARPDRIVE, disable direct I/O
-	 */
-	if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
-		printk(MPT2SAS_WARN_FMT "WarpDrive : Direct IO is disabled "
-		    "for the drive with handle(0x%04x): num_mem=%d, "
-		    "max_mem_allowed=%d\n", ioc->name, raid_device->handle,
-		    num_pds, MPT_MAX_WARPDRIVE_PDS);
-		kfree(vol_pg0);
-		return;
-	}
-	for (count = 0; count < num_pds; count++) {
-		if (mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
-		    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
-		    vol_pg0->PhysDisk[count].PhysDiskNum) ||
-		     le16_to_cpu(pd_pg0.DevHandle) ==
-		    MPT2SAS_INVALID_DEVICE_HANDLE) {
-			printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is "
-			    "disabled for the drive with handle(0x%04x) member"
-			    "handle retrieval failed for member number=%d\n",
-			    ioc->name, raid_device->handle,
-			    vol_pg0->PhysDisk[count].PhysDiskNum);
-			goto out_error;
-		}
-		/* Disable direct I/O if member drive lba exceeds 4 bytes */
-		dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA);
-		if (dev_max_lba >> 32) {
-			printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is "
-			    "disabled for the drive with handle(0x%04x) member"
-			    "handle (0x%04x) unsupported max lba 0x%016llx\n",
-			    ioc->name, raid_device->handle,
-			    le16_to_cpu(pd_pg0.DevHandle),
-			    (unsigned long long)dev_max_lba);
-			goto out_error;
-		}
-
-		raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
-	}
-
-	/*
-	 * Assumption for WD: Direct I/O is not supported if the volume is
-	 * not RAID0
-	 */
-	if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) {
-		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
-		    "for the drive with handle(0x%04x): type=%d, "
-		    "s_sz=%uK, blk_size=%u\n", ioc->name,
-		    raid_device->handle, raid_device->volume_type,
-		    (le32_to_cpu(vol_pg0->StripeSize) *
-		    le16_to_cpu(vol_pg0->BlockSize)) / 1024,
-		    le16_to_cpu(vol_pg0->BlockSize));
-		goto out_error;
-	}
-
-	stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
-	stripe_exp = find_first_bit(&stripe_sz, 32);
-	if (stripe_exp == 32) {
-		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
-		"for the drive with handle(0x%04x) invalid stripe sz %uK\n",
-		    ioc->name, raid_device->handle,
-		    (le32_to_cpu(vol_pg0->StripeSize) *
-		    le16_to_cpu(vol_pg0->BlockSize)) / 1024);
-		goto out_error;
-	}
-	raid_device->stripe_exponent = stripe_exp;
-	block_sz = le16_to_cpu(vol_pg0->BlockSize);
-	block_exp = find_first_bit(&block_sz, 16);
-	if (block_exp == 16) {
-		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
-		    "for the drive with handle(0x%04x) invalid block sz %u\n",
-		    ioc->name, raid_device->handle,
-		    le16_to_cpu(vol_pg0->BlockSize));
-		goto out_error;
-	}
-	raid_device->block_exponent = block_exp;
-	raid_device->direct_io_enabled = 1;
-
-	printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is Enabled for the drive"
-	    " with handle(0x%04x)\n", ioc->name, raid_device->handle);
-	/*
-	 * WARPDRIVE: Though the following fields are not used for direct IO,
-	 * stored for future purpose:
-	 */
-	raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
-	raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
-	raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
-
-
-	kfree(vol_pg0);
-	return;
-
-out_error:
-	raid_device->direct_io_enabled = 0;
-	for (count = 0; count < num_pds; count++)
-		raid_device->pd_handle[count] = 0;
-	kfree(vol_pg0);
-	return;
-}
-
-/**
- * _scsih_enable_tlr - setting TLR flags
- * @ioc: per adapter object
- * @sdev: scsi device struct
- *
- * Enabling Transaction Layer Retries for tape devices when
- * vpd page 0x90 is present
- *
- */
-static void
-_scsih_enable_tlr(struct MPT2SAS_ADAPTER *ioc, struct scsi_device *sdev)
-{
-	/* only for TAPE */
-	if (sdev->type != TYPE_TAPE)
-		return;
-
-	if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR))
-		return;
-
-	sas_enable_tlr(sdev);
-	sdev_printk(KERN_INFO, sdev, "TLR %s\n",
-	    sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled");
-	return;
-
-}
-
-/**
- * _scsih_slave_configure - device configure routine.
- * @sdev: scsi device struct
- *
- * Returns 0 if ok. Any other return is assumed to be an error and
- * the device is ignored.
- */
-static int
-_scsih_slave_configure(struct scsi_device *sdev)
-{
-	struct Scsi_Host *shost = sdev->host;
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	struct _sas_device *sas_device;
-	struct _raid_device *raid_device;
-	unsigned long flags;
-	int qdepth;
-	u8 ssp_target = 0;
-	char *ds = "";
-	char *r_level = "";
-	u16 handle, volume_handle = 0;
-	u64 volume_wwid = 0;
-
-	qdepth = 1;
-	sas_device_priv_data = sdev->hostdata;
-	sas_device_priv_data->configured_lun = 1;
-	sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT;
-	sas_target_priv_data = sas_device_priv_data->sas_target;
-	handle = sas_target_priv_data->handle;
-
-	/* raid volume handling */
-	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
-
-		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
-		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-		if (!raid_device) {
-			dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-			    "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
-			    __LINE__, __func__));
-			return 1;
-		}
-
-		if (_scsih_get_volume_capabilities(ioc, raid_device)) {
-			dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-			    "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
-			    __LINE__, __func__));
-			return 1;
-		}
-		/*
-		 * WARPDRIVE: Initialize the required data for Direct IO
-		 */
-		_scsih_init_warpdrive_properties(ioc, raid_device);
-
-		/* RAID Queue Depth Support
-		 * IS volume = underlying qdepth of drive type, either
-		 *    MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH
-		 * IM/IME/R10 = 128 (MPT2SAS_RAID_QUEUE_DEPTH)
-		 */
-		if (raid_device->device_info &
-		    MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
-			qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
-			ds = "SSP";
-		} else {
-			qdepth = MPT2SAS_SATA_QUEUE_DEPTH;
-			 if (raid_device->device_info &
-			    MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
-				ds = "SATA";
-			else
-				ds = "STP";
-		}
-
-		switch (raid_device->volume_type) {
-		case MPI2_RAID_VOL_TYPE_RAID0:
-			r_level = "RAID0";
-			break;
-		case MPI2_RAID_VOL_TYPE_RAID1E:
-			qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
-			if (ioc->manu_pg10.OEMIdentifier &&
-			    (le32_to_cpu(ioc->manu_pg10.GenericFlags0) &
-			    MFG10_GF0_R10_DISPLAY) &&
-			    !(raid_device->num_pds % 2))
-				r_level = "RAID10";
-			else
-				r_level = "RAID1E";
-			break;
-		case MPI2_RAID_VOL_TYPE_RAID1:
-			qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
-			r_level = "RAID1";
-			break;
-		case MPI2_RAID_VOL_TYPE_RAID10:
-			qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
-			r_level = "RAID10";
-			break;
-		case MPI2_RAID_VOL_TYPE_UNKNOWN:
-		default:
-			qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
-			r_level = "RAIDX";
-			break;
-		}
-
-		if (!ioc->hide_ir_msg)
-			sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), "
-			    "wwid(0x%016llx), pd_count(%d), type(%s)\n",
-			    r_level, raid_device->handle,
-			    (unsigned long long)raid_device->wwid,
-			    raid_device->num_pds, ds);
-		_scsih_change_queue_depth(sdev, qdepth);
-		/* raid transport support */
-		if (!ioc->is_warpdrive)
-			_scsih_set_level(sdev, raid_device->volume_type);
-		return 0;
-	}
-
-	/* non-raid handling */
-	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
-		if (mpt2sas_config_get_volume_handle(ioc, handle,
-		    &volume_handle)) {
-			dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-			    "failure at %s:%d/%s()!\n", ioc->name,
-			    __FILE__, __LINE__, __func__));
-			return 1;
-		}
-		if (volume_handle && mpt2sas_config_get_volume_wwid(ioc,
-		    volume_handle, &volume_wwid)) {
-			dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-			    "failure at %s:%d/%s()!\n", ioc->name,
-			    __FILE__, __LINE__, __func__));
-			return 1;
-		}
-	}
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_by_addr(ioc,
-	   sas_device_priv_data->sas_target->sas_address);
-	if (!sas_device) {
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-			"failure at %s:%d/%s()!\n", ioc->name, __FILE__,
-			__LINE__, __func__));
-		return 1;
-	}
-	sas_device->volume_handle = volume_handle;
-	sas_device->volume_wwid = volume_wwid;
-	if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
-		qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
-		ssp_target = 1;
-		ds = "SSP";
-	} else {
-		qdepth = MPT2SAS_SATA_QUEUE_DEPTH;
-		if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
-			ds = "STP";
-		else if (sas_device->device_info &
-		    MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
-			ds = "SATA";
-	}
-	sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), "
-	    "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n",
-	    ds, sas_device->handle,
-	    (unsigned long long)sas_device->sas_address,
-	    sas_device->phy,
-	    (unsigned long long)sas_device->device_name);
-	sdev_printk(KERN_INFO, sdev, "%s: "
-	    "enclosure_logical_id(0x%016llx), slot(%d)\n", ds,
-	    (unsigned long long) sas_device->enclosure_logical_id,
-	    sas_device->slot);
-
-	sas_device_put(sas_device);
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	if (!ssp_target)
-		_scsih_display_sata_capabilities(ioc, handle, sdev);
-
-	_scsih_change_queue_depth(sdev, qdepth);
-
-	if (ssp_target) {
-		sas_read_port_mode_page(sdev);
-		_scsih_enable_tlr(ioc, sdev);
-	}
-
-	return 0;
-}
-
-/**
- * _scsih_bios_param - fetch head, sector, cylinder info for a disk
- * @sdev: scsi device struct
- * @bdev: pointer to block device context
- * @capacity: device size (in 512 byte sectors)
- * @params: three element array to place output:
- *              params[0] number of heads (max 255)
- *              params[1] number of sectors (max 63)
- *              params[2] number of cylinders
- *
- * Return nothing.
- */
-static int
-_scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
-    sector_t capacity, int params[])
-{
-	int		heads;
-	int		sectors;
-	sector_t	cylinders;
-	ulong 		dummy;
-
-	heads = 64;
-	sectors = 32;
-
-	dummy = heads * sectors;
-	cylinders = capacity;
-	sector_div(cylinders, dummy);
-
-	/*
-	 * Handle extended translation size for logical drives
-	 * > 1Gb
-	 */
-	if ((ulong)capacity >= 0x200000) {
-		heads = 255;
-		sectors = 63;
-		dummy = heads * sectors;
-		cylinders = capacity;
-		sector_div(cylinders, dummy);
-	}
-
-	/* return result */
-	params[0] = heads;
-	params[1] = sectors;
-	params[2] = cylinders;
-
-	return 0;
-}
-
-/**
- * _scsih_response_code - translation of device response code
- * @ioc: per adapter object
- * @response_code: response code returned by the device
- *
- * Return nothing.
- */
-static void
-_scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code)
-{
-	char *desc;
-
-	switch (response_code) {
-	case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE:
-		desc = "task management request completed";
-		break;
-	case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME:
-		desc = "invalid frame";
-		break;
-	case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
-		desc = "task management request not supported";
-		break;
-	case MPI2_SCSITASKMGMT_RSP_TM_FAILED:
-		desc = "task management request failed";
-		break;
-	case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED:
-		desc = "task management request succeeded";
-		break;
-	case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN:
-		desc = "invalid lun";
-		break;
-	case 0xA:
-		desc = "overlapped tag attempted";
-		break;
-	case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
-		desc = "task queued, however not sent to target";
-		break;
-	default:
-		desc = "unknown";
-		break;
-	}
-	printk(MPT2SAS_WARN_FMT "response_code(0x%01x): %s\n",
-		ioc->name, response_code, desc);
-}
-
-/**
- * _scsih_tm_done - tm completion routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: none.
- *
- * The callback handler when using scsih_issue_tm.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-static u8
-_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
-{
-	MPI2DefaultReply_t *mpi_reply;
-
-	if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED)
-		return 1;
-	if (ioc->tm_cmds.smid != smid)
-		return 1;
-	mpt2sas_base_flush_reply_queues(ioc);
-	ioc->tm_cmds.status |= MPT2_CMD_COMPLETE;
-	mpi_reply =  mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (mpi_reply) {
-		memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
-		ioc->tm_cmds.status |= MPT2_CMD_REPLY_VALID;
-	}
-	ioc->tm_cmds.status &= ~MPT2_CMD_PENDING;
-	complete(&ioc->tm_cmds.done);
-	return 1;
-}
-
-/**
- * mpt2sas_scsih_set_tm_flag - set per target tm_busy
- * @ioc: per adapter object
- * @handle: device handle
- *
- * During taskmangement request, we need to freeze the device queue.
- */
-void
-mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct scsi_device *sdev;
-	u8 skip = 0;
-
-	shost_for_each_device(sdev, ioc->shost) {
-		if (skip)
-			continue;
-		sas_device_priv_data = sdev->hostdata;
-		if (!sas_device_priv_data)
-			continue;
-		if (sas_device_priv_data->sas_target->handle == handle) {
-			sas_device_priv_data->sas_target->tm_busy = 1;
-			skip = 1;
-			ioc->ignore_loginfos = 1;
-		}
-	}
-}
-
-/**
- * mpt2sas_scsih_clear_tm_flag - clear per target tm_busy
- * @ioc: per adapter object
- * @handle: device handle
- *
- * During taskmangement request, we need to freeze the device queue.
- */
-void
-mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct scsi_device *sdev;
-	u8 skip = 0;
-
-	shost_for_each_device(sdev, ioc->shost) {
-		if (skip)
-			continue;
-		sas_device_priv_data = sdev->hostdata;
-		if (!sas_device_priv_data)
-			continue;
-		if (sas_device_priv_data->sas_target->handle == handle) {
-			sas_device_priv_data->sas_target->tm_busy = 0;
-			skip = 1;
-			ioc->ignore_loginfos = 0;
-		}
-	}
-}
-
-
-/**
- * mpt2sas_scsih_issue_tm - main routine for sending tm requests
- * @ioc: per adapter struct
- * @device_handle: device handle
- * @channel: the channel assigned by the OS
- * @id: the id assigned by the OS
- * @lun: lun number
- * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
- * @smid_task: smid assigned to the task
- * @timeout: timeout in seconds
- * @m_type: TM_MUTEX_ON or TM_MUTEX_OFF
- * Context: user
- *
- * A generic API for sending task management requests to firmware.
- *
- * The callback index is set inside `ioc->tm_cb_idx`.
- *
- * Return SUCCESS or FAILED.
- */
-int
-mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint channel,
-    uint id, uint lun, u8 type, u16 smid_task, ulong timeout,
-	enum mutex_type m_type)
-{
-	Mpi2SCSITaskManagementRequest_t *mpi_request;
-	Mpi2SCSITaskManagementReply_t *mpi_reply;
-	u16 smid = 0;
-	u32 ioc_state;
-	unsigned long timeleft;
-	struct scsiio_tracker *scsi_lookup = NULL;
-	int rc;
-
-	if (m_type == TM_MUTEX_ON)
-		mutex_lock(&ioc->tm_cmds.mutex);
-	if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n",
-		    __func__, ioc->name);
-		rc = FAILED;
-		goto err_out;
-	}
-
-	if (ioc->shost_recovery || ioc->remove_host ||
-	    ioc->pci_error_recovery) {
-		printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
-		    __func__, ioc->name);
-		rc = FAILED;
-		goto err_out;
-	}
-
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
-	if (ioc_state & MPI2_DOORBELL_USED) {
-		dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell "
-		    "active!\n", ioc->name));
-		rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-		rc = (!rc) ? SUCCESS : FAILED;
-		goto err_out;
-	}
-
-	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
-		mpt2sas_base_fault_info(ioc, ioc_state &
-		    MPI2_DOORBELL_DATA_MASK);
-		rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-		rc = (!rc) ? SUCCESS : FAILED;
-		goto err_out;
-	}
-
-	smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		rc = FAILED;
-		goto err_out;
-	}
-
-	if (type == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
-		scsi_lookup = &ioc->scsi_lookup[smid_task - 1];
-
-	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x),"
-	    " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type,
-	    smid_task));
-	ioc->tm_cmds.status = MPT2_CMD_PENDING;
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->tm_cmds.smid = smid;
-	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
-	memset(ioc->tm_cmds.reply, 0, sizeof(Mpi2SCSITaskManagementReply_t));
-	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
-	mpi_request->DevHandle = cpu_to_le16(handle);
-	mpi_request->TaskType = type;
-	mpi_request->TaskMID = cpu_to_le16(smid_task);
-	int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
-	mpt2sas_scsih_set_tm_flag(ioc, handle);
-	init_completion(&ioc->tm_cmds.done);
-	mpt2sas_base_put_smid_hi_priority(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
-	if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
-		    ioc->name, __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2SCSITaskManagementRequest_t)/4);
-		if (!(ioc->tm_cmds.status & MPT2_CMD_RESET)) {
-			rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-			    FORCE_BIG_HAMMER);
-			rc = (!rc) ? SUCCESS : FAILED;
-			ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
-			mpt2sas_scsih_clear_tm_flag(ioc, handle);
-			goto err_out;
-		}
-	}
-
-	if (ioc->tm_cmds.status & MPT2_CMD_REPLY_VALID) {
-		mpi_reply = ioc->tm_cmds.reply;
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "complete tm: "
-		    "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
-		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
-		    le32_to_cpu(mpi_reply->IOCLogInfo),
-		    le32_to_cpu(mpi_reply->TerminationCount)));
-		if (ioc->logging_level & MPT_DEBUG_TM) {
-			_scsih_response_code(ioc, mpi_reply->ResponseCode);
-			if (mpi_reply->IOCStatus)
-				_debug_dump_mf(mpi_request,
-				    sizeof(Mpi2SCSITaskManagementRequest_t)/4);
-		}
-	}
-
-	switch (type) {
-	case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
-		rc = SUCCESS;
-		if (scsi_lookup->scmd == NULL)
-			break;
-		rc = FAILED;
-		break;
-
-	case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
-		if (_scsih_scsi_lookup_find_by_target(ioc, id, channel))
-			rc = FAILED;
-		else
-			rc = SUCCESS;
-		break;
-
-	case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET:
-	case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET:
-		if (_scsih_scsi_lookup_find_by_lun(ioc, id, lun, channel))
-			rc = FAILED;
-		else
-			rc = SUCCESS;
-		break;
-	case MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK:
-		rc = SUCCESS;
-		break;
-	default:
-		rc = FAILED;
-		break;
-	}
-
-	mpt2sas_scsih_clear_tm_flag(ioc, handle);
-	ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
-	if (m_type == TM_MUTEX_ON)
-		mutex_unlock(&ioc->tm_cmds.mutex);
-
-	return rc;
-
- err_out:
-	if (m_type == TM_MUTEX_ON)
-		mutex_unlock(&ioc->tm_cmds.mutex);
-	return rc;
-}
-
-/**
- * _scsih_tm_display_info - displays info about the device
- * @ioc: per adapter struct
- * @scmd: pointer to scsi command object
- *
- * Called by task management callback handlers.
- */
-static void
-_scsih_tm_display_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
-{
-	struct scsi_target *starget = scmd->device->sdev_target;
-	struct MPT2SAS_TARGET *priv_target = starget->hostdata;
-	struct _sas_device *sas_device = NULL;
-	unsigned long flags;
-	char *device_str = NULL;
-
-	if (!priv_target)
-		return;
-	if (ioc->hide_ir_msg)
-		device_str = "WarpDrive";
-	else
-		device_str = "volume";
-
-	scsi_print_command(scmd);
-	if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
-		starget_printk(KERN_INFO, starget, "%s handle(0x%04x), "
-		    "%s wwid(0x%016llx)\n", device_str, priv_target->handle,
-		    device_str, (unsigned long long)priv_target->sas_address);
-	} else {
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = __mpt2sas_get_sdev_from_target(ioc, priv_target);
-		if (sas_device) {
-			if (priv_target->flags &
-			    MPT_TARGET_FLAGS_RAID_COMPONENT) {
-				starget_printk(KERN_INFO, starget,
-				    "volume handle(0x%04x), "
-				    "volume wwid(0x%016llx)\n",
-				    sas_device->volume_handle,
-				   (unsigned long long)sas_device->volume_wwid);
-			}
-			starget_printk(KERN_INFO, starget,
-			    "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n",
-			    sas_device->handle,
-			    (unsigned long long)sas_device->sas_address,
-			    sas_device->phy);
-			starget_printk(KERN_INFO, starget,
-			    "enclosure_logical_id(0x%016llx), slot(%d)\n",
-			   (unsigned long long)sas_device->enclosure_logical_id,
-			    sas_device->slot);
-
-			sas_device_put(sas_device);
-		}
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	}
-}
-
-/**
- * _scsih_abort - eh threads main abort routine
- * @scmd: pointer to scsi command object
- *
- * Returns SUCCESS if command aborted else FAILED
- */
-static int
-_scsih_abort(struct scsi_cmnd *scmd)
-{
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	u16 smid;
-	u16 handle;
-	int r;
-
-	sdev_printk(KERN_INFO, scmd->device, "attempting task abort! "
-	    "scmd(%p)\n", scmd);
-	_scsih_tm_display_info(ioc, scmd);
-
-	sas_device_priv_data = scmd->device->hostdata;
-	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
-		sdev_printk(KERN_INFO, scmd->device, "device been deleted! "
-		    "scmd(%p)\n", scmd);
-		scmd->result = DID_NO_CONNECT << 16;
-		scmd->scsi_done(scmd);
-		r = SUCCESS;
-		goto out;
-	}
-
-	/* search for the command */
-	smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd);
-	if (!smid) {
-		scmd->result = DID_RESET << 16;
-		r = SUCCESS;
-		goto out;
-	}
-
-	/* for hidden raid components and volumes this is not supported */
-	if (sas_device_priv_data->sas_target->flags &
-	    MPT_TARGET_FLAGS_RAID_COMPONENT ||
-	    sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) {
-		scmd->result = DID_RESET << 16;
-		r = FAILED;
-		goto out;
-	}
-
-	mpt2sas_halt_firmware(ioc);
-
-	handle = sas_device_priv_data->sas_target->handle;
-	r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
-	    scmd->device->id, scmd->device->lun,
-	    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, TM_MUTEX_ON);
-
- out:
-	sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
-	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
-	return r;
-}
-
-/**
- * _scsih_dev_reset - eh threads main device reset routine
- * @scmd: pointer to scsi command object
- *
- * Returns SUCCESS if command aborted else FAILED
- */
-static int
-_scsih_dev_reset(struct scsi_cmnd *scmd)
-{
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct _sas_device *sas_device = NULL;
-	u16	handle;
-	int r;
-
-	struct scsi_target *starget = scmd->device->sdev_target;
-	struct MPT2SAS_TARGET *target_priv_data = starget->hostdata;
-
-	starget_printk(KERN_INFO, starget, "attempting device reset! "
-	    "scmd(%p)\n", scmd);
-	_scsih_tm_display_info(ioc, scmd);
-
-	sas_device_priv_data = scmd->device->hostdata;
-	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
-		starget_printk(KERN_INFO, starget, "device been deleted! "
-		    "scmd(%p)\n", scmd);
-		scmd->result = DID_NO_CONNECT << 16;
-		scmd->scsi_done(scmd);
-		r = SUCCESS;
-		goto out;
-	}
-
-	/* for hidden raid components obtain the volume_handle */
-	handle = 0;
-	if (sas_device_priv_data->sas_target->flags &
-	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
-		sas_device = mpt2sas_get_sdev_from_target(ioc,
-				target_priv_data);
-		if (sas_device)
-			handle = sas_device->volume_handle;
-	} else
-		handle = sas_device_priv_data->sas_target->handle;
-
-	if (!handle) {
-		scmd->result = DID_RESET << 16;
-		r = FAILED;
-		goto out;
-	}
-
-	r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
-	    scmd->device->id, scmd->device->lun,
-	    MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30, TM_MUTEX_ON);
-
- out:
-	sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
-	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
-
-	if (sas_device)
-		sas_device_put(sas_device);
-
-	return r;
-}
-
-/**
- * _scsih_target_reset - eh threads main target reset routine
- * @scmd: pointer to scsi command object
- *
- * Returns SUCCESS if command aborted else FAILED
- */
-static int
-_scsih_target_reset(struct scsi_cmnd *scmd)
-{
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct _sas_device *sas_device = NULL;
-	u16	handle;
-	int r;
-	struct scsi_target *starget = scmd->device->sdev_target;
-	struct MPT2SAS_TARGET *target_priv_data = starget->hostdata;
-
-	starget_printk(KERN_INFO, starget, "attempting target reset! "
-	    "scmd(%p)\n", scmd);
-	_scsih_tm_display_info(ioc, scmd);
-
-	sas_device_priv_data = scmd->device->hostdata;
-	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
-		starget_printk(KERN_INFO, starget, "target been deleted! "
-		    "scmd(%p)\n", scmd);
-		scmd->result = DID_NO_CONNECT << 16;
-		scmd->scsi_done(scmd);
-		r = SUCCESS;
-		goto out;
-	}
-
-	/* for hidden raid components obtain the volume_handle */
-	handle = 0;
-	if (sas_device_priv_data->sas_target->flags &
-	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
-		sas_device = mpt2sas_get_sdev_from_target(ioc,
-				target_priv_data);
-		if (sas_device)
-			handle = sas_device->volume_handle;
-	} else
-		handle = sas_device_priv_data->sas_target->handle;
-
-	if (!handle) {
-		scmd->result = DID_RESET << 16;
-		r = FAILED;
-		goto out;
-	}
-
-	r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
-	    scmd->device->id, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
-	    30, TM_MUTEX_ON);
-
- out:
-	starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
-	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
-
-	if (sas_device)
-		sas_device_put(sas_device);
-
-	return r;
-}
-
-/**
- * _scsih_host_reset - eh threads main host reset routine
- * @scmd: pointer to scsi command object
- *
- * Returns SUCCESS if command aborted else FAILED
- */
-static int
-_scsih_host_reset(struct scsi_cmnd *scmd)
-{
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
-	int r, retval;
-
-	printk(MPT2SAS_INFO_FMT "attempting host reset! scmd(%p)\n",
-	    ioc->name, scmd);
-	scsi_print_command(scmd);
-
-	if (ioc->is_driver_loading) {
-		printk(MPT2SAS_INFO_FMT "Blocking the host reset\n",
-							  ioc->name);
-		r = FAILED;
-		goto out;
-	}
-
-	retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-	    FORCE_BIG_HAMMER);
-	r = (retval < 0) ? FAILED : SUCCESS;
-
- out:
-	printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n",
-	    ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
-
-	return r;
-}
-
-/**
- * _scsih_fw_event_add - insert and queue up fw_event
- * @ioc: per adapter object
- * @fw_event: object describing the event
- * Context: This function will acquire ioc->fw_event_lock.
- *
- * This adds the firmware event object into link list, then queues it up to
- * be processed from user context.
- *
- * Return nothing.
- */
-static void
-_scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
-{
-	unsigned long flags;
-
-	if (ioc->firmware_event_thread == NULL)
-		return;
-
-	spin_lock_irqsave(&ioc->fw_event_lock, flags);
-	fw_event_work_get(fw_event);
-	list_add_tail(&fw_event->list, &ioc->fw_event_list);
-	INIT_DELAYED_WORK(&fw_event->delayed_work, _firmware_event_work);
-	fw_event_work_get(fw_event);
-	queue_delayed_work(ioc->firmware_event_thread,
-	    &fw_event->delayed_work, 0);
-	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
-}
-
-/**
- * _scsih_fw_event_del_from_list - delete fw_event from the list
- * @ioc: per adapter object
- * @fw_event: object describing the event
- * Context: This function will acquire ioc->fw_event_lock.
- *
- * If the fw_event is on the fw_event_list, remove it and do a put.
- *
- * Return nothing.
- */
-static void
-_scsih_fw_event_del_from_list(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
-    *fw_event)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->fw_event_lock, flags);
-	if (!list_empty(&fw_event->list)) {
-		list_del_init(&fw_event->list);
-		fw_event_work_put(fw_event);
-	}
-	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
-}
-
-/**
- * _scsih_error_recovery_delete_devices - remove devices not responding
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_scsih_error_recovery_delete_devices(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct fw_event_work *fw_event;
-
-	if (ioc->is_driver_loading)
-		return;
-
-	fw_event = alloc_fw_event_work(0);
-	if (!fw_event)
-		return;
-
-	fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES;
-	fw_event->ioc = ioc;
-	_scsih_fw_event_add(ioc, fw_event);
-	fw_event_work_put(fw_event);
-}
-
-/**
- * mpt2sas_port_enable_complete - port enable completed (fake event)
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-void
-mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct fw_event_work *fw_event;
-
-	fw_event = alloc_fw_event_work(0);
-	if (!fw_event)
-		return;
-	fw_event->event = MPT2SAS_PORT_ENABLE_COMPLETE;
-	fw_event->ioc = ioc;
-	_scsih_fw_event_add(ioc, fw_event);
-	fw_event_work_put(fw_event);
-}
-
-static struct fw_event_work *dequeue_next_fw_event(struct MPT2SAS_ADAPTER *ioc)
-{
-	unsigned long flags;
-	struct fw_event_work *fw_event = NULL;
-
-	spin_lock_irqsave(&ioc->fw_event_lock, flags);
-	if (!list_empty(&ioc->fw_event_list)) {
-		fw_event = list_first_entry(&ioc->fw_event_list,
-				struct fw_event_work, list);
-		list_del_init(&fw_event->list);
-	}
-	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
-
-	return fw_event;
-}
-
-/**
- * _scsih_fw_event_cleanup_queue - cleanup event queue
- * @ioc: per adapter object
- *
- * Walk the firmware event queue, either killing timers, or waiting
- * for outstanding events to complete
- *
- * Return nothing.
- */
-static void
-_scsih_fw_event_cleanup_queue(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct fw_event_work *fw_event;
-
-	if (list_empty(&ioc->fw_event_list) ||
-	     !ioc->firmware_event_thread || in_interrupt())
-		return;
-
-	while ((fw_event = dequeue_next_fw_event(ioc))) {
-		/*
-		 * Wait on the fw_event to complete. If this returns 1, then
-		 * the event was never executed, and we need a put for the
-		 * reference the delayed_work had on the fw_event.
-		 *
-		 * If it did execute, we wait for it to finish, and the put will
-		 * happen from _firmware_event_work()
-		 */
-		if (cancel_delayed_work_sync(&fw_event->delayed_work))
-			fw_event_work_put(fw_event);
-
-		fw_event_work_put(fw_event);
-	}
-}
-
-/**
- * _scsih_ublock_io_all_device - unblock every device
- * @ioc: per adapter object
- *
- * change the device state from block to running
- */
-static void
-_scsih_ublock_io_all_device(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct scsi_device *sdev;
-
-	shost_for_each_device(sdev, ioc->shost) {
-		sas_device_priv_data = sdev->hostdata;
-		if (!sas_device_priv_data)
-			continue;
-		if (!sas_device_priv_data->block)
-			continue;
-		sas_device_priv_data->block = 0;
-		dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, "device_running, "
-		    "handle(0x%04x)\n",
-		    sas_device_priv_data->sas_target->handle));
-		scsi_internal_device_unblock(sdev, SDEV_RUNNING);
-	}
-}
-/**
- * _scsih_ublock_io_device - set the device state to SDEV_RUNNING
- * @ioc: per adapter object
- * @handle: device handle
- *
- * During device pull we need to appropiately set the sdev state.
- */
-static void
-_scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
-{
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct scsi_device *sdev;
-
-	shost_for_each_device(sdev, ioc->shost) {
-		sas_device_priv_data = sdev->hostdata;
-		if (!sas_device_priv_data)
-			continue;
-		if (!sas_device_priv_data->block)
-			continue;
-		if (sas_device_priv_data->sas_target->sas_address ==
-								sas_address) {
-			dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
-			    MPT2SAS_INFO_FMT "SDEV_RUNNING: "
-			    "sas address(0x%016llx)\n", ioc->name,
-				(unsigned long long)sas_address));
-			sas_device_priv_data->block = 0;
-			scsi_internal_device_unblock(sdev, SDEV_RUNNING);
-		}
-	}
-}
-
-/**
- * _scsih_block_io_all_device - set the device state to SDEV_BLOCK
- * @ioc: per adapter object
- * @handle: device handle
- *
- * During device pull we need to appropiately set the sdev state.
- */
-static void
-_scsih_block_io_all_device(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct scsi_device *sdev;
-
-	shost_for_each_device(sdev, ioc->shost) {
-		sas_device_priv_data = sdev->hostdata;
-		if (!sas_device_priv_data)
-			continue;
-		if (sas_device_priv_data->block)
-			continue;
-		sas_device_priv_data->block = 1;
-		dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, "device_blocked, "
-		    "handle(0x%04x)\n",
-		    sas_device_priv_data->sas_target->handle));
-		scsi_internal_device_block(sdev);
-	}
-}
-
-
-/**
- * _scsih_block_io_device - set the device state to SDEV_BLOCK
- * @ioc: per adapter object
- * @handle: device handle
- *
- * During device pull we need to appropiately set the sdev state.
- */
-static void
-_scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct scsi_device *sdev;
-
-	shost_for_each_device(sdev, ioc->shost) {
-		sas_device_priv_data = sdev->hostdata;
-		if (!sas_device_priv_data)
-			continue;
-		if (sas_device_priv_data->block)
-			continue;
-		if (sas_device_priv_data->sas_target->handle == handle) {
-			dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
-			    MPT2SAS_INFO_FMT "SDEV_BLOCK: "
-			    "handle(0x%04x)\n", ioc->name, handle));
-			sas_device_priv_data->block = 1;
-			scsi_internal_device_block(sdev);
-		}
-	}
-}
-
-/**
- * _scsih_block_io_to_children_attached_to_ex
- * @ioc: per adapter object
- * @sas_expander: the sas_device object
- *
- * This routine set sdev state to SDEV_BLOCK for all devices
- * attached to this expander. This function called when expander is
- * pulled.
- */
-static void
-_scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc,
-    struct _sas_node *sas_expander)
-{
-	struct _sas_port *mpt2sas_port;
-	struct _sas_device *sas_device;
-	struct _sas_node *expander_sibling;
-	unsigned long flags;
-
-	if (!sas_expander)
-		return;
-
-	list_for_each_entry(mpt2sas_port,
-	   &sas_expander->sas_port_list, port_list) {
-		if (mpt2sas_port->remote_identify.device_type == SAS_END_DEVICE) {
-			spin_lock_irqsave(&ioc->sas_device_lock, flags);
-			sas_device = __mpt2sas_get_sdev_by_addr(ioc,
-					mpt2sas_port->remote_identify.sas_address);
-			if (sas_device) {
-				set_bit(sas_device->handle,
-						ioc->blocking_handles);
-				sas_device_put(sas_device);
-			}
-			spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		}
-	}
-
-	list_for_each_entry(mpt2sas_port,
-	   &sas_expander->sas_port_list, port_list) {
-
-		if (mpt2sas_port->remote_identify.device_type ==
-		    SAS_EDGE_EXPANDER_DEVICE ||
-		    mpt2sas_port->remote_identify.device_type ==
-		    SAS_FANOUT_EXPANDER_DEVICE) {
-			expander_sibling =
-			    mpt2sas_scsih_expander_find_by_sas_address(
-			    ioc, mpt2sas_port->remote_identify.sas_address);
-			_scsih_block_io_to_children_attached_to_ex(ioc,
-			    expander_sibling);
-		}
-	}
-}
-
-/**
- * _scsih_block_io_to_children_attached_directly
- * @ioc: per adapter object
- * @event_data: topology change event data
- *
- * This routine set sdev state to SDEV_BLOCK for all devices
- * direct attached during device pull.
- */
-static void
-_scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventDataSasTopologyChangeList_t *event_data)
-{
-	int i;
-	u16 handle;
-	u16 reason_code;
-	u8 phy_number;
-
-	for (i = 0; i < event_data->NumEntries; i++) {
-		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
-		if (!handle)
-			continue;
-		phy_number = event_data->StartPhyNum + i;
-		reason_code = event_data->PHY[i].PhyStatus &
-		    MPI2_EVENT_SAS_TOPO_RC_MASK;
-		if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
-			_scsih_block_io_device(ioc, handle);
-	}
-}
-
-/**
- * _scsih_tm_tr_send - send task management request
- * @ioc: per adapter object
- * @handle: device handle
- * Context: interrupt time.
- *
- * This code is to initiate the device removal handshake protocol
- * with controller firmware.  This function will issue target reset
- * using high priority request queue.  It will send a sas iounit
- * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
- *
- * This is designed to send muliple task management request at the same
- * time to the fifo. If the fifo is full, we will append the request,
- * and process it in a future completion.
- */
-static void
-_scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	Mpi2SCSITaskManagementRequest_t *mpi_request;
-	u16 smid;
-	struct _sas_device *sas_device = NULL;
-	struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
-	u64 sas_address = 0;
-	unsigned long flags;
-	struct _tr_list *delayed_tr;
-	u32 ioc_state;
-
-	if (ioc->remove_host) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
-		    "removed: handle(0x%04x)\n", __func__, ioc->name, handle));
-		return;
-	} else if (ioc->pci_error_recovery) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
-		    "error recovery: handle(0x%04x)\n", __func__, ioc->name,
-		    handle));
-		return;
-	}
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
-		   "operational: handle(0x%04x)\n", __func__, ioc->name,
-		   handle));
-		return;
-	}
-
-	/* if PD, then return */
-	if (test_bit(handle, ioc->pd_handles))
-		return;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
-	if (sas_device && sas_device->starget &&
-	     sas_device->starget->hostdata) {
-		sas_target_priv_data = sas_device->starget->hostdata;
-		sas_target_priv_data->deleted = 1;
-		sas_address = sas_device->sas_address;
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	if (sas_target_priv_data) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: "
-		"handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, handle,
-			(unsigned long long)sas_address));
-		_scsih_ublock_io_device(ioc, sas_address);
-		sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
-	}
-
-	smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
-	if (!smid) {
-		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
-		if (!delayed_tr)
-			goto out;
-		INIT_LIST_HEAD(&delayed_tr->list);
-		delayed_tr->handle = handle;
-		list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "DELAYED:tr:handle(0x%04x), (open)\n",
-		    ioc->name, handle));
-		goto out;
-	}
-
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), "
-	    "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid,
-	    ioc->tm_tr_cb_idx));
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
-	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
-	mpi_request->DevHandle = cpu_to_le16(handle);
-	mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
-	mpt2sas_base_put_smid_hi_priority(ioc, smid);
-out:
-	if (sas_device)
-		sas_device_put(sas_device);
-}
-
-
-
-/**
- * _scsih_sas_control_complete - completion routine
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: interrupt time.
- *
- * This is the sas iounit control completion routine.
- * This code is part of the code to initiate the device removal
- * handshake protocol with controller firmware.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-static u8
-_scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-    u8 msix_index, u32 reply)
-{
-	Mpi2SasIoUnitControlReply_t *mpi_reply =
-	    mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (likely(mpi_reply)) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-		"sc_complete:handle(0x%04x), (open) "
-		"smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
-		ioc->name, le16_to_cpu(mpi_reply->DevHandle), smid,
-		le16_to_cpu(mpi_reply->IOCStatus),
-		le32_to_cpu(mpi_reply->IOCLogInfo)));
-	} else {
-		printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-	}
-	return 1;
-}
-
-/**
- * _scsih_tm_tr_volume_send - send target reset request for volumes
- * @ioc: per adapter object
- * @handle: device handle
- * Context: interrupt time.
- *
- * This is designed to send muliple task management request at the same
- * time to the fifo. If the fifo is full, we will append the request,
- * and process it in a future completion.
- */
-static void
-_scsih_tm_tr_volume_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	Mpi2SCSITaskManagementRequest_t *mpi_request;
-	u16 smid;
-	struct _tr_list *delayed_tr;
-
-	if (ioc->shost_recovery || ioc->remove_host ||
-	    ioc->pci_error_recovery) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
-		   "progress!\n", __func__, ioc->name));
-		return;
-	}
-
-	smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_volume_cb_idx);
-	if (!smid) {
-		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
-		if (!delayed_tr)
-			return;
-		INIT_LIST_HEAD(&delayed_tr->list);
-		delayed_tr->handle = handle;
-		list_add_tail(&delayed_tr->list, &ioc->delayed_tr_volume_list);
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "DELAYED:tr:handle(0x%04x), (open)\n",
-		    ioc->name, handle));
-		return;
-	}
-
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), "
-	    "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid,
-	    ioc->tm_tr_volume_cb_idx));
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
-	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
-	mpi_request->DevHandle = cpu_to_le16(handle);
-	mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
-	mpt2sas_base_put_smid_hi_priority(ioc, smid);
-}
-
-/**
- * _scsih_tm_volume_tr_complete - target reset completion
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: interrupt time.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-static u8
-_scsih_tm_volume_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-    u8 msix_index, u32 reply)
-{
-	u16 handle;
-	Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
-	Mpi2SCSITaskManagementReply_t *mpi_reply =
-	    mpt2sas_base_get_reply_virt_addr(ioc, reply);
-
-	if (ioc->shost_recovery || ioc->remove_host ||
-	    ioc->pci_error_recovery) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
-		   "progress!\n", __func__, ioc->name));
-		return 1;
-	}
-	if (unlikely(!mpi_reply)) {
-		printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return 1;
-	}
-	mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid);
-	handle = le16_to_cpu(mpi_request_tm->DevHandle);
-	if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
-		dewtprintk(ioc, printk("spurious interrupt: "
-		    "handle(0x%04x:0x%04x), smid(%d)!!!\n", handle,
-		    le16_to_cpu(mpi_reply->DevHandle), smid));
-		return 0;
-	}
-
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-	    "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
-	    "loginfo(0x%08x), completed(%d)\n", ioc->name,
-	    handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
-	    le32_to_cpu(mpi_reply->IOCLogInfo),
-	    le32_to_cpu(mpi_reply->TerminationCount)));
-
-	return _scsih_check_for_pending_tm(ioc, smid);
-}
-
-/**
- * _scsih_tm_tr_complete -
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: interrupt time.
- *
- * This is the target reset completion routine.
- * This code is part of the code to initiate the device removal
- * handshake protocol with controller firmware.
- * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-static u8
-_scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-    u32 reply)
-{
-	u16 handle;
-	Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
-	Mpi2SCSITaskManagementReply_t *mpi_reply =
-	    mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	Mpi2SasIoUnitControlRequest_t *mpi_request;
-	u16 smid_sas_ctrl;
-	u32 ioc_state;
-
-	if (ioc->remove_host) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
-		   "removed\n", __func__, ioc->name));
-		return 1;
-	} else if (ioc->pci_error_recovery) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
-		    "error recovery\n", __func__, ioc->name));
-		return 1;
-	}
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
-		    "operational\n", __func__, ioc->name));
-		return 1;
-	}
-	if (unlikely(!mpi_reply)) {
-		printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return 1;
-	}
-	mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid);
-	handle = le16_to_cpu(mpi_request_tm->DevHandle);
-	if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "spurious interrupt: "
-		    "handle(0x%04x:0x%04x), smid(%d)!!!\n", ioc->name, handle,
-		    le16_to_cpu(mpi_reply->DevHandle), smid));
-		return 0;
-	}
-
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-	    "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
-	    "loginfo(0x%08x), completed(%d)\n", ioc->name,
-	    handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
-	    le32_to_cpu(mpi_reply->IOCLogInfo),
-	    le32_to_cpu(mpi_reply->TerminationCount)));
-
-	smid_sas_ctrl = mpt2sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx);
-	if (!smid_sas_ctrl) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		return 1;
-	}
-
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sc_send:handle(0x%04x), "
-	    "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid_sas_ctrl,
-	    ioc->tm_sas_control_cb_idx));
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl);
-	memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
-	mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
-	mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
-	mpi_request->DevHandle = mpi_request_tm->DevHandle;
-	mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl);
-
-	return _scsih_check_for_pending_tm(ioc, smid);
-}
-
-/**
- * _scsih_check_for_pending_tm - check for pending task management
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * This will check delayed target reset list, and feed the
- * next reqeust.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-static u8
-_scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	struct _tr_list *delayed_tr;
-
-	if (!list_empty(&ioc->delayed_tr_volume_list)) {
-		delayed_tr = list_entry(ioc->delayed_tr_volume_list.next,
-		    struct _tr_list, list);
-		mpt2sas_base_free_smid(ioc, smid);
-		_scsih_tm_tr_volume_send(ioc, delayed_tr->handle);
-		list_del(&delayed_tr->list);
-		kfree(delayed_tr);
-		return 0;
-	}
-
-	if (!list_empty(&ioc->delayed_tr_list)) {
-		delayed_tr = list_entry(ioc->delayed_tr_list.next,
-		    struct _tr_list, list);
-		mpt2sas_base_free_smid(ioc, smid);
-		_scsih_tm_tr_send(ioc, delayed_tr->handle);
-		list_del(&delayed_tr->list);
-		kfree(delayed_tr);
-		return 0;
-	}
-
-	return 1;
-}
-
-/**
- * _scsih_check_topo_delete_events - sanity check on topo events
- * @ioc: per adapter object
- * @event_data: the event data payload
- *
- * This routine added to better handle cable breaker.
- *
- * This handles the case where driver receives multiple expander
- * add and delete events in a single shot.  When there is a delete event
- * the routine will void any pending add events waiting in the event queue.
- *
- * Return nothing.
- */
-static void
-_scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventDataSasTopologyChangeList_t *event_data)
-{
-	struct fw_event_work *fw_event;
-	Mpi2EventDataSasTopologyChangeList_t *local_event_data;
-	u16 expander_handle;
-	struct _sas_node *sas_expander;
-	unsigned long flags;
-	int i, reason_code;
-	u16 handle;
-
-	for (i = 0 ; i < event_data->NumEntries; i++) {
-		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
-		if (!handle)
-			continue;
-		reason_code = event_data->PHY[i].PhyStatus &
-		    MPI2_EVENT_SAS_TOPO_RC_MASK;
-		if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)
-			_scsih_tm_tr_send(ioc, handle);
-	}
-
-	expander_handle = le16_to_cpu(event_data->ExpanderDevHandle);
-	if (expander_handle < ioc->sas_hba.num_phys) {
-		_scsih_block_io_to_children_attached_directly(ioc, event_data);
-		return;
-	}
-	if (event_data->ExpStatus ==
-	    MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING) {
-		/* put expander attached devices into blocking state */
-		spin_lock_irqsave(&ioc->sas_node_lock, flags);
-		sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
-		    expander_handle);
-		_scsih_block_io_to_children_attached_to_ex(ioc, sas_expander);
-		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-		do {
-			handle = find_first_bit(ioc->blocking_handles,
-			    ioc->facts.MaxDevHandle);
-			if (handle < ioc->facts.MaxDevHandle)
-				_scsih_block_io_device(ioc, handle);
-		} while (test_and_clear_bit(handle, ioc->blocking_handles));
-	} else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING)
-		_scsih_block_io_to_children_attached_directly(ioc, event_data);
-
-	if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
-		return;
-
-	/* mark ignore flag for pending events */
-	spin_lock_irqsave(&ioc->fw_event_lock, flags);
-	list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
-		if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
-		    fw_event->ignore)
-			continue;
-		local_event_data = (Mpi2EventDataSasTopologyChangeList_t *)
-			fw_event->event_data;
-		if (local_event_data->ExpStatus ==
-		    MPI2_EVENT_SAS_TOPO_ES_ADDED ||
-		    local_event_data->ExpStatus ==
-		    MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
-			if (le16_to_cpu(local_event_data->ExpanderDevHandle) ==
-			    expander_handle) {
-				dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-				    "setting ignoring flag\n", ioc->name));
-				fw_event->ignore = 1;
-			}
-		}
-	}
-	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
-}
-
-/**
- * _scsih_set_volume_delete_flag - setting volume delete flag
- * @ioc: per adapter object
- * @handle: device handle
- *
- * This
- * Return nothing.
- */
-static void
-_scsih_set_volume_delete_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct _raid_device *raid_device;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->raid_device_lock, flags);
-	raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
-	if (raid_device && raid_device->starget &&
-	    raid_device->starget->hostdata) {
-		sas_target_priv_data =
-		    raid_device->starget->hostdata;
-		sas_target_priv_data->deleted = 1;
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "setting delete flag: handle(0x%04x), "
-		    "wwid(0x%016llx)\n", ioc->name, handle,
-		    (unsigned long long) raid_device->wwid));
-	}
-	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-}
-
-/**
- * _scsih_set_volume_handle_for_tr - set handle for target reset to volume
- * @handle: input handle
- * @a: handle for volume a
- * @b: handle for volume b
- *
- * IR firmware only supports two raid volumes.  The purpose of this
- * routine is to set the volume handle in either a or b. When the given
- * input handle is non-zero, or when a and b have not been set before.
- */
-static void
-_scsih_set_volume_handle_for_tr(u16 handle, u16 *a, u16 *b)
-{
-	if (!handle || handle == *a || handle == *b)
-		return;
-	if (!*a)
-		*a = handle;
-	else if (!*b)
-		*b = handle;
-}
-
-/**
- * _scsih_check_ir_config_unhide_events - check for UNHIDE events
- * @ioc: per adapter object
- * @event_data: the event data payload
- * Context: interrupt time.
- *
- * This routine will send target reset to volume, followed by target
- * resets to the PDs. This is called when a PD has been removed, or
- * volume has been deleted or removed. When the target reset is sent
- * to volume, the PD target resets need to be queued to start upon
- * completion of the volume target reset.
- *
- * Return nothing.
- */
-static void
-_scsih_check_ir_config_unhide_events(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventDataIrConfigChangeList_t *event_data)
-{
-	Mpi2EventIrConfigElement_t *element;
-	int i;
-	u16 handle, volume_handle, a, b;
-	struct _tr_list *delayed_tr;
-
-	a = 0;
-	b = 0;
-
-	if (ioc->is_warpdrive)
-		return;
-
-	/* Volume Resets for Deleted or Removed */
-	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
-	for (i = 0; i < event_data->NumElements; i++, element++) {
-		if (element->ReasonCode ==
-		    MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED ||
-		    element->ReasonCode ==
-		    MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
-			volume_handle = le16_to_cpu(element->VolDevHandle);
-			_scsih_set_volume_delete_flag(ioc, volume_handle);
-			_scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
-		}
-	}
-
-	/* Volume Resets for UNHIDE events */
-	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
-	for (i = 0; i < event_data->NumElements; i++, element++) {
-		if (le32_to_cpu(event_data->Flags) &
-		    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
-			continue;
-		if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_UNHIDE) {
-			volume_handle = le16_to_cpu(element->VolDevHandle);
-			_scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
-		}
-	}
-
-	if (a)
-		_scsih_tm_tr_volume_send(ioc, a);
-	if (b)
-		_scsih_tm_tr_volume_send(ioc, b);
-
-	/* PD target resets */
-	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
-	for (i = 0; i < event_data->NumElements; i++, element++) {
-		if (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_UNHIDE)
-			continue;
-		handle = le16_to_cpu(element->PhysDiskDevHandle);
-		volume_handle = le16_to_cpu(element->VolDevHandle);
-		clear_bit(handle, ioc->pd_handles);
-		if (!volume_handle)
-			_scsih_tm_tr_send(ioc, handle);
-		else if (volume_handle == a || volume_handle == b) {
-			delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
-			BUG_ON(!delayed_tr);
-			INIT_LIST_HEAD(&delayed_tr->list);
-			delayed_tr->handle = handle;
-			list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
-			dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-			    "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name,
-			    handle));
-		} else
-			_scsih_tm_tr_send(ioc, handle);
-	}
-}
-
-
-/**
- * _scsih_check_volume_delete_events - set delete flag for volumes
- * @ioc: per adapter object
- * @event_data: the event data payload
- * Context: interrupt time.
- *
- * This will handle the case when the cable connected to entire volume is
- * pulled. We will take care of setting the deleted flag so normal IO will
- * not be sent.
- *
- * Return nothing.
- */
-static void
-_scsih_check_volume_delete_events(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventDataIrVolume_t *event_data)
-{
-	u32 state;
-
-	if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
-		return;
-	state = le32_to_cpu(event_data->NewValue);
-	if (state == MPI2_RAID_VOL_STATE_MISSING || state ==
-	    MPI2_RAID_VOL_STATE_FAILED)
-		_scsih_set_volume_delete_flag(ioc,
-		    le16_to_cpu(event_data->VolDevHandle));
-}
-
-/**
- * _scsih_temp_threshold_events - display temperature threshold exceeded events
- * @ioc: per adapter object
- * @event_data: the temp threshold event data
- * Context: interrupt time.
- *
- * Return nothing.
- */
-static void
-_scsih_temp_threshold_events(struct MPT2SAS_ADAPTER *ioc,
-	Mpi2EventDataTemperature_t *event_data)
-{
-	if (ioc->temp_sensors_count >= event_data->SensorNum) {
-		printk(MPT2SAS_ERR_FMT "Temperature Threshold flags %s%s%s%s"
-		  " exceeded for Sensor: %d !!!\n", ioc->name,
-		  ((le16_to_cpu(event_data->Status) & 0x1) == 1) ? "0 " : " ",
-		  ((le16_to_cpu(event_data->Status) & 0x2) == 2) ? "1 " : " ",
-		  ((le16_to_cpu(event_data->Status) & 0x4) == 4) ? "2 " : " ",
-		  ((le16_to_cpu(event_data->Status) & 0x8) == 8) ? "3 " : " ",
-		  event_data->SensorNum);
-		printk(MPT2SAS_ERR_FMT "Current Temp In Celsius: %d\n",
-			ioc->name, event_data->CurrentTemperature);
-	}
-}
-
-/**
- * _scsih_flush_running_cmds - completing outstanding commands.
- * @ioc: per adapter object
- *
- * The flushing out of all pending scmd commands following host reset,
- * where all IO is dropped to the floor.
- *
- * Return nothing.
- */
-static void
-_scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct scsi_cmnd *scmd;
-	u16 smid;
-	u16 count = 0;
-
-	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
-		scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
-		if (!scmd)
-			continue;
-		count++;
-		mpt2sas_base_free_smid(ioc, smid);
-		scsi_dma_unmap(scmd);
-		if (ioc->pci_error_recovery)
-			scmd->result = DID_NO_CONNECT << 16;
-		else
-			scmd->result = DID_RESET << 16;
-		scmd->scsi_done(scmd);
-	}
-	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "completing %d cmds\n",
-	    ioc->name, count));
-}
-
-/**
- * _scsih_setup_eedp - setup MPI request for EEDP transfer
- * @scmd: pointer to scsi command object
- * @mpi_request: pointer to the SCSI_IO reqest message frame
- *
- * Supporting protection 1 and 3.
- *
- * Returns nothing
- */
-static void
-_scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request)
-{
-	u16 eedp_flags;
-	unsigned char prot_op = scsi_get_prot_op(scmd);
-	unsigned char prot_type = scsi_get_prot_type(scmd);
-
-	if (prot_type == SCSI_PROT_DIF_TYPE0 || prot_op == SCSI_PROT_NORMAL)
-		return;
-
-	if (prot_op ==  SCSI_PROT_READ_STRIP)
-		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
-	else if (prot_op ==  SCSI_PROT_WRITE_INSERT)
-		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
-	else
-		return;
-
-	switch (prot_type) {
-	case SCSI_PROT_DIF_TYPE1:
-	case SCSI_PROT_DIF_TYPE2:
-
-		/*
-		* enable ref/guard checking
-		* auto increment ref tag
-		*/
-		eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
-		    MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
-		    MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
-		mpi_request->CDB.EEDP32.PrimaryReferenceTag =
-		    cpu_to_be32(scsi_get_lba(scmd));
-		break;
-
-	case SCSI_PROT_DIF_TYPE3:
-
-		/*
-		* enable guard checking
-		*/
-		eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
-		break;
-	}
-	mpi_request->EEDPBlockSize = cpu_to_le32(scmd->device->sector_size);
-	mpi_request->EEDPFlags = cpu_to_le16(eedp_flags);
-}
-
-/**
- * _scsih_eedp_error_handling - return sense code for EEDP errors
- * @scmd: pointer to scsi command object
- * @ioc_status: ioc status
- *
- * Returns nothing
- */
-static void
-_scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
-{
-	u8 ascq;
-
-	switch (ioc_status) {
-	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
-		ascq = 0x01;
-		break;
-	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
-		ascq = 0x02;
-		break;
-	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
-		ascq = 0x03;
-		break;
-	default:
-		ascq = 0x00;
-		break;
-	}
-
-	scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST, 0x10, ascq);
-	scmd->result = DRIVER_SENSE << 24 | (DID_ABORT << 16) |
-	    SAM_STAT_CHECK_CONDITION;
-}
-
-/**
- * _scsih_scsi_direct_io_get - returns direct io flag
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns the smid stored scmd pointer.
- */
-static inline u8
-_scsih_scsi_direct_io_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	return ioc->scsi_lookup[smid - 1].direct_io;
-}
-
-/**
- * _scsih_scsi_direct_io_set - sets direct io flag
- * @ioc: per adapter object
- * @smid: system request message index
- * @direct_io: Zero or non-zero value to set in the direct_io flag
- *
- * Returns Nothing.
- */
-static inline void
-_scsih_scsi_direct_io_set(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
-{
-	ioc->scsi_lookup[smid - 1].direct_io = direct_io;
-}
-
-
-/**
- * _scsih_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
- * @ioc: per adapter object
- * @scmd: pointer to scsi command object
- * @raid_device: pointer to raid device data structure
- * @mpi_request: pointer to the SCSI_IO reqest message frame
- * @smid: system request message index
- *
- * Returns nothing
- */
-static void
-_scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
-	struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
-	u16 smid)
-{
-	sector_t v_lba, p_lba, stripe_off, column, io_size;
-	u32 stripe_sz, stripe_exp;
-	u8 num_pds, cmd = scmd->cmnd[0];
-
-	if (cmd != READ_10 && cmd != WRITE_10 &&
-	    cmd != READ_16 && cmd != WRITE_16)
-		return;
-
-	if (cmd == READ_10 || cmd == WRITE_10)
-		v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]);
-	else
-		v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]);
-
-	io_size = scsi_bufflen(scmd) >> raid_device->block_exponent;
-
-	if (v_lba + io_size - 1 > raid_device->max_lba)
-		return;
-
-	stripe_sz = raid_device->stripe_sz;
-	stripe_exp = raid_device->stripe_exponent;
-	stripe_off = v_lba & (stripe_sz - 1);
-
-	/* Return unless IO falls within a stripe */
-	if (stripe_off + io_size > stripe_sz)
-		return;
-
-	num_pds = raid_device->num_pds;
-	p_lba = v_lba >> stripe_exp;
-	column = sector_div(p_lba, num_pds);
-	p_lba = (p_lba << stripe_exp) + stripe_off;
-
-	mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]);
-
-	if (cmd == READ_10 || cmd == WRITE_10)
-		put_unaligned_be32(lower_32_bits(p_lba),
-				   &mpi_request->CDB.CDB32[2]);
-	else
-		put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]);
-
-	_scsih_scsi_direct_io_set(ioc, smid, 1);
-}
-
-/**
- * _scsih_qcmd - main scsi request entry point
- * @scmd: pointer to scsi command object
- * @done: function pointer to be invoked on completion
- *
- * The callback index is set inside `ioc->scsi_io_cb_idx`.
- *
- * Returns 0 on success.  If there's a failure, return either:
- * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
- * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
- */
-static int
-_scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
-{
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	struct _raid_device *raid_device;
-	Mpi2SCSIIORequest_t *mpi_request;
-	u32 mpi_control;
-	u16 smid;
-
-	sas_device_priv_data = scmd->device->hostdata;
-	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
-		scmd->result = DID_NO_CONNECT << 16;
-		scmd->scsi_done(scmd);
-		return 0;
-	}
-
-	if (ioc->pci_error_recovery || ioc->remove_host) {
-		scmd->result = DID_NO_CONNECT << 16;
-		scmd->scsi_done(scmd);
-		return 0;
-	}
-
-	sas_target_priv_data = sas_device_priv_data->sas_target;
-	/* invalid device handle */
-	if (sas_target_priv_data->handle == MPT2SAS_INVALID_DEVICE_HANDLE) {
-		scmd->result = DID_NO_CONNECT << 16;
-		scmd->scsi_done(scmd);
-		return 0;
-	}
-
-	/* host recovery or link resets sent via IOCTLs */
-	if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
-		return SCSI_MLQUEUE_HOST_BUSY;
-	/* device busy with task management */
-	else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy)
-		return SCSI_MLQUEUE_DEVICE_BUSY;
-	/* device has been deleted */
-	else if (sas_target_priv_data->deleted) {
-		scmd->result = DID_NO_CONNECT << 16;
-		scmd->scsi_done(scmd);
-		return 0;
-	}
-
-	if (scmd->sc_data_direction == DMA_FROM_DEVICE)
-		mpi_control = MPI2_SCSIIO_CONTROL_READ;
-	else if (scmd->sc_data_direction == DMA_TO_DEVICE)
-		mpi_control = MPI2_SCSIIO_CONTROL_WRITE;
-	else
-		mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
-
-	/* set tags */
-	mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
-
-	/* Make sure Device is not raid volume.
-	 * We do not expose raid functionality to upper layer for warpdrive.
-	 */
-	if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) &&
-	    sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
-		mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
-
-	smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		goto out;
-	}
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
-	_scsih_setup_eedp(scmd, mpi_request);
-	if (scmd->cmd_len == 32)
-		mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
-	mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
-	if (sas_device_priv_data->sas_target->flags &
-	    MPT_TARGET_FLAGS_RAID_COMPONENT)
-		mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
-	else
-	mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
-	mpi_request->DevHandle =
-	    cpu_to_le16(sas_device_priv_data->sas_target->handle);
-	mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
-	mpi_request->Control = cpu_to_le32(mpi_control);
-	mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len);
-	mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR;
-	mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
-	mpi_request->SenseBufferLowAddress =
-	    mpt2sas_base_get_sense_buffer_dma(ioc, smid);
-	mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
-	mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI +
-	    MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR);
-	mpi_request->VF_ID = 0; /* TODO */
-	mpi_request->VP_ID = 0;
-	int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
-	    mpi_request->LUN);
-	memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
-
-	if (!mpi_request->DataLength) {
-		mpt2sas_base_build_zero_len_sge(ioc, &mpi_request->SGL);
-	} else {
-		if (_scsih_build_scatter_gather(ioc, scmd, smid)) {
-			mpt2sas_base_free_smid(ioc, smid);
-			goto out;
-		}
-	}
-
-	raid_device = sas_target_priv_data->raid_device;
-	if (raid_device && raid_device->direct_io_enabled)
-		_scsih_setup_direct_io(ioc, scmd, raid_device, mpi_request,
-		    smid);
-
-	if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST))
-		mpt2sas_base_put_smid_scsi_io(ioc, smid,
-		    le16_to_cpu(mpi_request->DevHandle));
-	else
-		mpt2sas_base_put_smid_default(ioc, smid);
-	return 0;
-
- out:
-	return SCSI_MLQUEUE_HOST_BUSY;
-}
-
-/**
- * _scsih_normalize_sense - normalize descriptor and fixed format sense data
- * @sense_buffer: sense data returned by target
- * @data: normalized skey/asc/ascq
- *
- * Return nothing.
- */
-static void
-_scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
-{
-	if ((sense_buffer[0] & 0x7F) >= 0x72) {
-		/* descriptor format */
-		data->skey = sense_buffer[1] & 0x0F;
-		data->asc = sense_buffer[2];
-		data->ascq = sense_buffer[3];
-	} else {
-		/* fixed format */
-		data->skey = sense_buffer[2] & 0x0F;
-		data->asc = sense_buffer[12];
-		data->ascq = sense_buffer[13];
-	}
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_scsi_ioc_info - translated non-successful SCSI_IO request
- * @ioc: per adapter object
- * @scmd: pointer to scsi command object
- * @mpi_reply: reply mf payload returned from firmware
- *
- * scsi_status - SCSI Status code returned from target device
- * scsi_state - state info associated with SCSI_IO determined by ioc
- * ioc_status - ioc supplied status info
- *
- * Return nothing.
- */
-static void
-_scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
-    Mpi2SCSIIOReply_t *mpi_reply, u16 smid)
-{
-	u32 response_info;
-	u8 *response_bytes;
-	u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	u8 scsi_state = mpi_reply->SCSIState;
-	u8 scsi_status = mpi_reply->SCSIStatus;
-	char *desc_ioc_state = NULL;
-	char *desc_scsi_status = NULL;
-	char *desc_scsi_state = ioc->tmp_string;
-	u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
-	struct _sas_device *sas_device = NULL;
-	struct scsi_target *starget = scmd->device->sdev_target;
-	struct MPT2SAS_TARGET *priv_target = starget->hostdata;
-	char *device_str = NULL;
-
-	if (!priv_target)
-		return;
-
-	if (ioc->hide_ir_msg)
-		device_str = "WarpDrive";
-	else
-		device_str = "volume";
-
-	if (log_info == 0x31170000)
-		return;
-
-	switch (ioc_status) {
-	case MPI2_IOCSTATUS_SUCCESS:
-		desc_ioc_state = "success";
-		break;
-	case MPI2_IOCSTATUS_INVALID_FUNCTION:
-		desc_ioc_state = "invalid function";
-		break;
-	case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
-		desc_ioc_state = "scsi recovered error";
-		break;
-	case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
-		desc_ioc_state = "scsi invalid dev handle";
-		break;
-	case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
-		desc_ioc_state = "scsi device not there";
-		break;
-	case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
-		desc_ioc_state = "scsi data overrun";
-		break;
-	case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
-		desc_ioc_state = "scsi data underrun";
-		break;
-	case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
-		desc_ioc_state = "scsi io data error";
-		break;
-	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
-		desc_ioc_state = "scsi protocol error";
-		break;
-	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
-		desc_ioc_state = "scsi task terminated";
-		break;
-	case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
-		desc_ioc_state = "scsi residual mismatch";
-		break;
-	case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
-		desc_ioc_state = "scsi task mgmt failed";
-		break;
-	case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
-		desc_ioc_state = "scsi ioc terminated";
-		break;
-	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
-		desc_ioc_state = "scsi ext terminated";
-		break;
-	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
-		desc_ioc_state = "eedp guard error";
-		break;
-	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
-		desc_ioc_state = "eedp ref tag error";
-		break;
-	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
-		desc_ioc_state = "eedp app tag error";
-		break;
-	default:
-		desc_ioc_state = "unknown";
-		break;
-	}
-
-	switch (scsi_status) {
-	case MPI2_SCSI_STATUS_GOOD:
-		desc_scsi_status = "good";
-		break;
-	case MPI2_SCSI_STATUS_CHECK_CONDITION:
-		desc_scsi_status = "check condition";
-		break;
-	case MPI2_SCSI_STATUS_CONDITION_MET:
-		desc_scsi_status = "condition met";
-		break;
-	case MPI2_SCSI_STATUS_BUSY:
-		desc_scsi_status = "busy";
-		break;
-	case MPI2_SCSI_STATUS_INTERMEDIATE:
-		desc_scsi_status = "intermediate";
-		break;
-	case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET:
-		desc_scsi_status = "intermediate condmet";
-		break;
-	case MPI2_SCSI_STATUS_RESERVATION_CONFLICT:
-		desc_scsi_status = "reservation conflict";
-		break;
-	case MPI2_SCSI_STATUS_COMMAND_TERMINATED:
-		desc_scsi_status = "command terminated";
-		break;
-	case MPI2_SCSI_STATUS_TASK_SET_FULL:
-		desc_scsi_status = "task set full";
-		break;
-	case MPI2_SCSI_STATUS_ACA_ACTIVE:
-		desc_scsi_status = "aca active";
-		break;
-	case MPI2_SCSI_STATUS_TASK_ABORTED:
-		desc_scsi_status = "task aborted";
-		break;
-	default:
-		desc_scsi_status = "unknown";
-		break;
-	}
-
-	desc_scsi_state[0] = '\0';
-	if (!scsi_state)
-		desc_scsi_state = " ";
-	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
-		strcat(desc_scsi_state, "response info ");
-	if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
-		strcat(desc_scsi_state, "state terminated ");
-	if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS)
-		strcat(desc_scsi_state, "no status ");
-	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED)
-		strcat(desc_scsi_state, "autosense failed ");
-	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)
-		strcat(desc_scsi_state, "autosense valid ");
-
-	scsi_print_command(scmd);
-
-	if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
-		printk(MPT2SAS_WARN_FMT "\t%s wwid(0x%016llx)\n", ioc->name,
-		    device_str, (unsigned long long)priv_target->sas_address);
-	} else {
-		sas_device = mpt2sas_get_sdev_from_target(ioc, priv_target);
-		if (sas_device) {
-			printk(MPT2SAS_WARN_FMT "\tsas_address(0x%016llx), "
-			    "phy(%d)\n", ioc->name, sas_device->sas_address,
-			    sas_device->phy);
-			printk(MPT2SAS_WARN_FMT
-			    "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
-			    ioc->name, sas_device->enclosure_logical_id,
-			    sas_device->slot);
-
-			sas_device_put(sas_device);
-		}
-	}
-
-	printk(MPT2SAS_WARN_FMT "\thandle(0x%04x), ioc_status(%s)(0x%04x), "
-	    "smid(%d)\n", ioc->name, le16_to_cpu(mpi_reply->DevHandle),
-	    desc_ioc_state, ioc_status, smid);
-	printk(MPT2SAS_WARN_FMT "\trequest_len(%d), underflow(%d), "
-	    "resid(%d)\n", ioc->name, scsi_bufflen(scmd), scmd->underflow,
-	    scsi_get_resid(scmd));
-	printk(MPT2SAS_WARN_FMT "\ttag(%d), transfer_count(%d), "
-	    "sc->result(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->TaskTag),
-	    le32_to_cpu(mpi_reply->TransferCount), scmd->result);
-	printk(MPT2SAS_WARN_FMT "\tscsi_status(%s)(0x%02x), "
-	    "scsi_state(%s)(0x%02x)\n", ioc->name, desc_scsi_status,
-	    scsi_status, desc_scsi_state, scsi_state);
-
-	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
-		struct sense_info data;
-		_scsih_normalize_sense(scmd->sense_buffer, &data);
-		printk(MPT2SAS_WARN_FMT "\t[sense_key,asc,ascq]: "
-		    "[0x%02x,0x%02x,0x%02x], count(%d)\n", ioc->name, data.skey,
-		    data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount));
-	}
-
-	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
-		response_info = le32_to_cpu(mpi_reply->ResponseInfo);
-		response_bytes = (u8 *)&response_info;
-		_scsih_response_code(ioc, response_bytes[0]);
-	}
-}
-#endif
-
-/**
- * _scsih_turn_on_pfa_led - illuminate PFA LED
- * @ioc: per adapter object
- * @handle: device handle
- * Context: process
- *
- * Return nothing.
- */
-static void
-_scsih_turn_on_pfa_led(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	Mpi2SepReply_t mpi_reply;
-	Mpi2SepRequest_t mpi_request;
-	struct _sas_device *sas_device;
-
-	sas_device = mpt2sas_get_sdev_by_handle(ioc, handle);
-	if (!sas_device)
-		return;
-
-	memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
-	mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
-	mpi_request.SlotStatus =
-	    cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
-	mpi_request.DevHandle = cpu_to_le16(handle);
-	mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS;
-	if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
-	    &mpi_request)) != 0) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
-		__FILE__, __LINE__, __func__);
-		goto out;
-	}
-	sas_device->pfa_led_on = 1;
-
-
-	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-		 "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
-		 ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
-		 le32_to_cpu(mpi_reply.IOCLogInfo)));
-		goto out;
-	}
-out:
-	sas_device_put(sas_device);
-}
-
-/**
- * _scsih_turn_off_pfa_led - turn off PFA LED
- * @ioc: per adapter object
- * @sas_device: sas device whose PFA LED has to turned off
- * Context: process
- *
- * Return nothing.
- */
-static void
-_scsih_turn_off_pfa_led(struct MPT2SAS_ADAPTER *ioc,
-	struct _sas_device *sas_device)
-{
-	Mpi2SepReply_t mpi_reply;
-	Mpi2SepRequest_t mpi_request;
-
-	memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
-	mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
-	mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
-	mpi_request.SlotStatus = 0;
-	mpi_request.Slot = cpu_to_le16(sas_device->slot);
-	mpi_request.DevHandle = 0;
-	mpi_request.EnclosureHandle = cpu_to_le16(sas_device->enclosure_handle);
-	mpi_request.Flags = MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS;
-	if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
-	    &mpi_request)) != 0) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
-		__FILE__, __LINE__, __func__);
-		return;
-	}
-
-	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "enclosure_processor: "
-		    "ioc_status (0x%04x), loginfo(0x%08x)\n", ioc->name,
-		    le16_to_cpu(mpi_reply.IOCStatus),
-		    le32_to_cpu(mpi_reply.IOCLogInfo)));
-		return;
-	}
-}
-
-/**
- * _scsih_send_event_to_turn_on_pfa_led - fire delayed event
- * @ioc: per adapter object
- * @handle: device handle
- * Context: interrupt.
- *
- * Return nothing.
- */
-static void
-_scsih_send_event_to_turn_on_pfa_led(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct fw_event_work *fw_event;
-
-	fw_event = alloc_fw_event_work(0);
-	if (!fw_event)
-		return;
-	fw_event->event = MPT2SAS_TURN_ON_PFA_LED;
-	fw_event->device_handle = handle;
-	fw_event->ioc = ioc;
-	_scsih_fw_event_add(ioc, fw_event);
-	fw_event_work_put(fw_event);
-}
-
-/**
- * _scsih_smart_predicted_fault - process smart errors
- * @ioc: per adapter object
- * @handle: device handle
- * Context: interrupt.
- *
- * Return nothing.
- */
-static void
-_scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct scsi_target *starget;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	Mpi2EventNotificationReply_t *event_reply;
-	Mpi2EventDataSasDeviceStatusChange_t *event_data;
-	struct _sas_device *sas_device;
-	ssize_t sz;
-	unsigned long flags;
-
-	/* only handle non-raid devices */
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
-	if (!sas_device) {
-		goto out_unlock;
-	}
-	starget = sas_device->starget;
-	sas_target_priv_data = starget->hostdata;
-
-	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) ||
-	   ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)))
-		goto out_unlock;
-
-	starget_printk(KERN_WARNING, starget, "predicted fault\n");
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM)
-		_scsih_send_event_to_turn_on_pfa_led(ioc, handle);
-
-	/* insert into event log */
-	sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
-	     sizeof(Mpi2EventDataSasDeviceStatusChange_t);
-	event_reply = kzalloc(sz, GFP_ATOMIC);
-	if (!event_reply) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-
-	event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
-	event_reply->Event =
-	    cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
-	event_reply->MsgLength = sz/4;
-	event_reply->EventDataLength =
-	    cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4);
-	event_data = (Mpi2EventDataSasDeviceStatusChange_t *)
-	    event_reply->EventData;
-	event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA;
-	event_data->ASC = 0x5D;
-	event_data->DevHandle = cpu_to_le16(handle);
-	event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address);
-	mpt2sas_ctl_add_to_event_log(ioc, event_reply);
-	kfree(event_reply);
-out:
-	if (sas_device)
-		sas_device_put(sas_device);
-	return;
-
-out_unlock:
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	goto out;
-}
-
-/**
- * _scsih_io_done - scsi request callback
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Callback handler when using _scsih_qcmd.
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-static u8
-_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
-{
-	Mpi2SCSIIORequest_t *mpi_request;
-	Mpi2SCSIIOReply_t *mpi_reply;
-	struct scsi_cmnd *scmd;
-	u16 ioc_status;
-	u32 xfer_cnt;
-	u8 scsi_state;
-	u8 scsi_status;
-	u32 log_info;
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	u32 response_code = 0;
-	unsigned long flags;
-
-	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
-	if (scmd == NULL)
-		return 1;
-
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-
-	if (mpi_reply == NULL) {
-		scmd->result = DID_OK << 16;
-		goto out;
-	}
-
-	sas_device_priv_data = scmd->device->hostdata;
-	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
-	     sas_device_priv_data->sas_target->deleted) {
-		scmd->result = DID_NO_CONNECT << 16;
-		goto out;
-	}
-	ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
-	/*
-	 * WARPDRIVE: If direct_io is set then it is directIO,
-	 * the failed direct I/O should be redirected to volume
-	 */
-	if (_scsih_scsi_direct_io_get(ioc, smid) &&
-	    ((ioc_status & MPI2_IOCSTATUS_MASK)
-	    != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) {
-		spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-		ioc->scsi_lookup[smid - 1].scmd = scmd;
-		_scsih_scsi_direct_io_set(ioc, smid, 0);
-		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-		memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
-		mpi_request->DevHandle =
-		    cpu_to_le16(sas_device_priv_data->sas_target->handle);
-		mpt2sas_base_put_smid_scsi_io(ioc, smid,
-		    sas_device_priv_data->sas_target->handle);
-		return 0;
-	}
-
-
-	/* turning off TLR */
-	scsi_state = mpi_reply->SCSIState;
-	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
-		response_code =
-		    le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
-	if (!sas_device_priv_data->tlr_snoop_check) {
-		sas_device_priv_data->tlr_snoop_check++;
-	/* Make sure Device is not raid volume.
-	 * We do not expose raid functionality to upper layer for warpdrive.
-	 */
-	if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) &&
-		sas_is_tlr_enabled(scmd->device) &&
-		    response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
-			sas_disable_tlr(scmd->device);
-			sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
-		}
-	}
-
-	xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
-	scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
-	if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
-		log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);
-	else
-		log_info = 0;
-	ioc_status &= MPI2_IOCSTATUS_MASK;
-	scsi_status = mpi_reply->SCSIStatus;
-
-	if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
-	    (scsi_status == MPI2_SCSI_STATUS_BUSY ||
-	     scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT ||
-	     scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) {
-		ioc_status = MPI2_IOCSTATUS_SUCCESS;
-	}
-
-	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
-		struct sense_info data;
-		const void *sense_data = mpt2sas_base_get_sense_buffer(ioc,
-		    smid);
-		u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
-		    le32_to_cpu(mpi_reply->SenseCount));
-		memcpy(scmd->sense_buffer, sense_data, sz);
-		_scsih_normalize_sense(scmd->sense_buffer, &data);
-		/* failure prediction threshold exceeded */
-		if (data.asc == 0x5D)
-			_scsih_smart_predicted_fault(ioc,
-			    le16_to_cpu(mpi_reply->DevHandle));
-	}
-
-	switch (ioc_status) {
-	case MPI2_IOCSTATUS_BUSY:
-	case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
-		scmd->result = SAM_STAT_BUSY;
-		break;
-
-	case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
-		scmd->result = DID_NO_CONNECT << 16;
-		break;
-
-	case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
-		if (sas_device_priv_data->block) {
-			scmd->result = DID_TRANSPORT_DISRUPTED << 16;
-			goto out;
-		}
-		if (log_info == 0x32010081) {
-			scmd->result = DID_RESET << 16;
-			break;
-		}
-		scmd->result = DID_SOFT_ERROR << 16;
-		break;
-	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
-	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
-		scmd->result = DID_RESET << 16;
-		break;
-
-	case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
-		if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt))
-			scmd->result = DID_SOFT_ERROR << 16;
-		else
-			scmd->result = (DID_OK << 16) | scsi_status;
-		break;
-
-	case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
-		scmd->result = (DID_OK << 16) | scsi_status;
-
-		if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID))
-			break;
-
-		if (xfer_cnt < scmd->underflow) {
-			if (scsi_status == SAM_STAT_BUSY)
-				scmd->result = SAM_STAT_BUSY;
-			else
-				scmd->result = DID_SOFT_ERROR << 16;
-		} else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
-		     MPI2_SCSI_STATE_NO_SCSI_STATUS))
-			scmd->result = DID_SOFT_ERROR << 16;
-		else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
-			scmd->result = DID_RESET << 16;
-		else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) {
-			mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID;
-			mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION;
-			scmd->result = (DRIVER_SENSE << 24) |
-			    SAM_STAT_CHECK_CONDITION;
-			scmd->sense_buffer[0] = 0x70;
-			scmd->sense_buffer[2] = ILLEGAL_REQUEST;
-			scmd->sense_buffer[12] = 0x20;
-			scmd->sense_buffer[13] = 0;
-		}
-		break;
-
-	case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
-		scsi_set_resid(scmd, 0);
-	case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
-	case MPI2_IOCSTATUS_SUCCESS:
-		scmd->result = (DID_OK << 16) | scsi_status;
-		if (response_code ==
-		    MPI2_SCSITASKMGMT_RSP_INVALID_FRAME ||
-		    (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
-		     MPI2_SCSI_STATE_NO_SCSI_STATUS)))
-			scmd->result = DID_SOFT_ERROR << 16;
-		else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
-			scmd->result = DID_RESET << 16;
-		break;
-
-	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
-	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
-	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
-		_scsih_eedp_error_handling(scmd, ioc_status);
-		break;
-	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
-	case MPI2_IOCSTATUS_INVALID_FUNCTION:
-	case MPI2_IOCSTATUS_INVALID_SGL:
-	case MPI2_IOCSTATUS_INTERNAL_ERROR:
-	case MPI2_IOCSTATUS_INVALID_FIELD:
-	case MPI2_IOCSTATUS_INVALID_STATE:
-	case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
-	case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
-	default:
-		scmd->result = DID_SOFT_ERROR << 16;
-		break;
-
-	}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
-		_scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
-#endif
-
- out:
-	scsi_dma_unmap(scmd);
-	scmd->scsi_done(scmd);
-	return 1;
-}
-
-/**
- * _scsih_sas_host_refresh - refreshing sas host object contents
- * @ioc: per adapter object
- * Context: user
- *
- * During port enable, fw will send topology events for every device. Its
- * possible that the handles may change from the previous setting, so this
- * code keeping handles updating if changed.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc)
-{
-	u16 sz;
-	u16 ioc_status;
-	int i;
-	Mpi2ConfigReply_t mpi_reply;
-	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
-	u16 attached_handle;
-	u8 link_rate;
-
-	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
-	    "updating handles for sas_host(0x%016llx)\n",
-	    ioc->name, (unsigned long long)ioc->sas_hba.sas_address));
-
-	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
-	    * sizeof(Mpi2SasIOUnit0PhyData_t));
-	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
-	if (!sas_iounit_pg0) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
-	}
-
-	if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
-	    sas_iounit_pg0, sz)) != 0)
-		goto out;
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
-		goto out;
-	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
-		link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4;
-		if (i == 0)
-			ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
-			    PhyData[0].ControllerDevHandle);
-		ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
-		attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
-		    AttachedDevHandle);
-		if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
-			link_rate = MPI2_SAS_NEG_LINK_RATE_1_5;
-		mpt2sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
-		    attached_handle, i, link_rate);
-	}
- out:
-	kfree(sas_iounit_pg0);
-}
-
-/**
- * _scsih_sas_host_add - create sas host object
- * @ioc: per adapter object
- *
- * Creating host side data object, stored in ioc->sas_hba
- *
- * Return nothing.
- */
-static void
-_scsih_sas_host_add(struct MPT2SAS_ADAPTER *ioc)
-{
-	int i;
-	Mpi2ConfigReply_t mpi_reply;
-	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
-	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
-	Mpi2SasPhyPage0_t phy_pg0;
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	Mpi2SasEnclosurePage0_t enclosure_pg0;
-	u16 ioc_status;
-	u16 sz;
-	u16 device_missing_delay;
-
-	mpt2sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys);
-	if (!ioc->sas_hba.num_phys) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
-	}
-
-	/* sas_iounit page 0 */
-	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
-	    sizeof(Mpi2SasIOUnit0PhyData_t));
-	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
-	if (!sas_iounit_pg0) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
-	}
-	if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
-	    sas_iounit_pg0, sz))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-
-	/* sas_iounit page 1 */
-	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
-	    sizeof(Mpi2SasIOUnit1PhyData_t));
-	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
-	if (!sas_iounit_pg1) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-	if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
-	    sas_iounit_pg1, sz))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-
-	ioc->io_missing_delay =
-	    le16_to_cpu(sas_iounit_pg1->IODeviceMissingDelay);
-	device_missing_delay =
-	    le16_to_cpu(sas_iounit_pg1->ReportDeviceMissingDelay);
-	if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
-		ioc->device_missing_delay = (device_missing_delay &
-		    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
-	else
-		ioc->device_missing_delay = device_missing_delay &
-		    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
-
-	ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev;
-	ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys,
-	    sizeof(struct _sas_phy), GFP_KERNEL);
-	if (!ioc->sas_hba.phy) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
-		if ((mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
-		    i))) {
-			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-			    ioc->name, __FILE__, __LINE__, __func__);
-			goto out;
-		}
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-			    ioc->name, __FILE__, __LINE__, __func__);
-			goto out;
-		}
-
-		if (i == 0)
-			ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
-			    PhyData[0].ControllerDevHandle);
-		ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
-		ioc->sas_hba.phy[i].phy_id = i;
-		mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i],
-		    phy_pg0, ioc->sas_hba.parent_dev);
-	}
-	if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
-	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out;
-	}
-	ioc->sas_hba.enclosure_handle =
-	    le16_to_cpu(sas_device_pg0.EnclosureHandle);
-	ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
-	printk(MPT2SAS_INFO_FMT "host_add: handle(0x%04x), "
-	    "sas_addr(0x%016llx), phys(%d)\n", ioc->name, ioc->sas_hba.handle,
-	    (unsigned long long) ioc->sas_hba.sas_address,
-	    ioc->sas_hba.num_phys) ;
-
-	if (ioc->sas_hba.enclosure_handle) {
-		if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply,
-		    &enclosure_pg0,
-		   MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
-		   ioc->sas_hba.enclosure_handle))) {
-			ioc->sas_hba.enclosure_logical_id =
-			    le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
-		}
-	}
-
- out:
-	kfree(sas_iounit_pg1);
-	kfree(sas_iounit_pg0);
-}
-
-/**
- * _scsih_expander_add -  creating expander object
- * @ioc: per adapter object
- * @handle: expander handle
- *
- * Creating expander object, stored in ioc->sas_expander_list.
- *
- * Return 0 for success, else error.
- */
-static int
-_scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct _sas_node *sas_expander;
-	Mpi2ConfigReply_t mpi_reply;
-	Mpi2ExpanderPage0_t expander_pg0;
-	Mpi2ExpanderPage1_t expander_pg1;
-	Mpi2SasEnclosurePage0_t enclosure_pg0;
-	u32 ioc_status;
-	u16 parent_handle;
-	u64 sas_address, sas_address_parent = 0;
-	int i;
-	unsigned long flags;
-	struct _sas_port *mpt2sas_port = NULL;
-	int rc = 0;
-
-	if (!handle)
-		return -1;
-
-	if (ioc->shost_recovery || ioc->pci_error_recovery)
-		return -1;
-
-	if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
-	    MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-
-	/* handle out of order topology events */
-	parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle);
-	if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent)
-	    != 0) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-	if (sas_address_parent != ioc->sas_hba.sas_address) {
-		spin_lock_irqsave(&ioc->sas_node_lock, flags);
-		sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
-		    sas_address_parent);
-		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-		if (!sas_expander) {
-			rc = _scsih_expander_add(ioc, parent_handle);
-			if (rc != 0)
-				return rc;
-		}
-	}
-
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	sas_address = le64_to_cpu(expander_pg0.SASAddress);
-	sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
-	    sas_address);
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
-	if (sas_expander)
-		return 0;
-
-	sas_expander = kzalloc(sizeof(struct _sas_node),
-	    GFP_KERNEL);
-	if (!sas_expander) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-
-	sas_expander->handle = handle;
-	sas_expander->num_phys = expander_pg0.NumPhys;
-	sas_expander->sas_address_parent = sas_address_parent;
-	sas_expander->sas_address = sas_address;
-
-	printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x),"
-	    " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name,
-	    handle, parent_handle, (unsigned long long)
-	    sas_expander->sas_address, sas_expander->num_phys);
-
-	if (!sas_expander->num_phys)
-		goto out_fail;
-	sas_expander->phy = kcalloc(sas_expander->num_phys,
-	    sizeof(struct _sas_phy), GFP_KERNEL);
-	if (!sas_expander->phy) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -1;
-		goto out_fail;
-	}
-
-	INIT_LIST_HEAD(&sas_expander->sas_port_list);
-	mpt2sas_port = mpt2sas_transport_port_add(ioc, handle,
-	    sas_address_parent);
-	if (!mpt2sas_port) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -1;
-		goto out_fail;
-	}
-	sas_expander->parent_dev = &mpt2sas_port->rphy->dev;
-
-	for (i = 0 ; i < sas_expander->num_phys ; i++) {
-		if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
-		    &expander_pg1, i, handle))) {
-			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-			    ioc->name, __FILE__, __LINE__, __func__);
-			rc = -1;
-			goto out_fail;
-		}
-		sas_expander->phy[i].handle = handle;
-		sas_expander->phy[i].phy_id = i;
-
-		if ((mpt2sas_transport_add_expander_phy(ioc,
-		    &sas_expander->phy[i], expander_pg1,
-		    sas_expander->parent_dev))) {
-			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-			    ioc->name, __FILE__, __LINE__, __func__);
-			rc = -1;
-			goto out_fail;
-		}
-	}
-
-	if (sas_expander->enclosure_handle) {
-		if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply,
-		    &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
-		   sas_expander->enclosure_handle))) {
-			sas_expander->enclosure_logical_id =
-			    le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
-		}
-	}
-
-	_scsih_expander_node_add(ioc, sas_expander);
-	 return 0;
-
- out_fail:
-
-	if (mpt2sas_port)
-		mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
-		    sas_address_parent);
-	kfree(sas_expander);
-	return rc;
-}
-
-/**
- * _scsih_done -  scsih callback handler.
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Callback handler when sending internal generated message frames.
- * The callback index passed is `ioc->scsih_cb_idx`
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-static u8
-_scsih_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
-{
-	MPI2DefaultReply_t *mpi_reply;
-
-	mpi_reply =  mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (ioc->scsih_cmds.status == MPT2_CMD_NOT_USED)
-		return 1;
-	if (ioc->scsih_cmds.smid != smid)
-		return 1;
-	ioc->scsih_cmds.status |= MPT2_CMD_COMPLETE;
-	if (mpi_reply) {
-		memcpy(ioc->scsih_cmds.reply, mpi_reply,
-		    mpi_reply->MsgLength*4);
-		ioc->scsih_cmds.status |= MPT2_CMD_REPLY_VALID;
-	}
-	ioc->scsih_cmds.status &= ~MPT2_CMD_PENDING;
-	complete(&ioc->scsih_cmds.done);
-	return 1;
-}
-
-/**
- * mpt2sas_expander_remove - removing expander object
- * @ioc: per adapter object
- * @sas_address: expander sas_address
- *
- * Return nothing.
- */
-void
-mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
-{
-	struct _sas_node *sas_expander;
-	unsigned long flags;
-
-	if (ioc->shost_recovery)
-		return;
-
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
-	    sas_address);
-	if (sas_expander)
-		list_del(&sas_expander->list);
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-	if (sas_expander)
-		_scsih_expander_node_remove(ioc, sas_expander);
-}
-
-/**
- * _scsih_check_access_status - check access flags
- * @ioc: per adapter object
- * @sas_address: sas address
- * @handle: sas device handle
- * @access_flags: errors returned during discovery of the device
- *
- * Return 0 for success, else failure
- */
-static u8
-_scsih_check_access_status(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
-   u16 handle, u8 access_status)
-{
-	u8 rc = 1;
-	char *desc = NULL;
-
-	switch (access_status) {
-	case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS:
-	case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION:
-		rc = 0;
-		break;
-	case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED:
-		desc = "sata capability failed";
-		break;
-	case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT:
-		desc = "sata affiliation conflict";
-		break;
-	case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE:
-		desc = "route not addressable";
-		break;
-	case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE:
-		desc = "smp error not addressable";
-		break;
-	case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED:
-		desc = "device blocked";
-		break;
-	case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED:
-	case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN:
-	case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT:
-	case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG:
-	case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION:
-	case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER:
-	case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN:
-	case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN:
-	case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN:
-	case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION:
-	case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE:
-	case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX:
-		desc = "sata initialization failed";
-		break;
-	default:
-		desc = "unknown";
-		break;
-	}
-
-	if (!rc)
-		return 0;
-
-	printk(MPT2SAS_ERR_FMT "discovery errors(%s): sas_address(0x%016llx), "
-	    "handle(0x%04x)\n", ioc->name, desc,
-	    (unsigned long long)sas_address, handle);
-	return rc;
-}
-
-static void
-_scsih_check_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	Mpi2ConfigReply_t mpi_reply;
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	struct _sas_device *sas_device;
-	u32 ioc_status;
-	unsigned long flags;
-	u64 sas_address;
-	struct scsi_target *starget;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	u32 device_info;
-
-
-	if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
-	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)))
-		return;
-
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
-		return;
-
-	/* check if this is end device */
-	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
-	if (!(_scsih_is_end_device(device_info)))
-		return;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
-	sas_device = __mpt2sas_get_sdev_by_addr(ioc,
-	    sas_address);
-
-	if (!sas_device) {
-		printk(MPT2SAS_ERR_FMT "device is not present "
-		    "handle(0x%04x), no sas_device!!!\n", ioc->name, handle);
-		goto out_unlock;
-	}
-
-	if (unlikely(sas_device->handle != handle)) {
-		starget = sas_device->starget;
-		sas_target_priv_data = starget->hostdata;
-		starget_printk(KERN_INFO, starget, "handle changed from(0x%04x)"
-		   " to (0x%04x)!!!\n", sas_device->handle, handle);
-		sas_target_priv_data->handle = handle;
-		sas_device->handle = handle;
-	}
-
-	/* check if device is present */
-	if (!(le16_to_cpu(sas_device_pg0.Flags) &
-	    MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
-		printk(MPT2SAS_ERR_FMT "device is not present "
-		    "handle(0x%04x), flags!!!\n", ioc->name, handle);
-		goto out_unlock;
-	}
-
-	/* check if there were any issues with discovery */
-	if (_scsih_check_access_status(ioc, sas_address, handle,
-	    sas_device_pg0.AccessStatus))
-		goto out_unlock;
-
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	_scsih_ublock_io_device(ioc, sas_address);
-	if (sas_device)
-		sas_device_put(sas_device);
-	return;
-
-out_unlock:
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	if (sas_device)
-		sas_device_put(sas_device);
-}
-
-/**
- * _scsih_add_device -  creating sas device object
- * @ioc: per adapter object
- * @handle: sas device handle
- * @phy_num: phy number end device attached to
- * @is_pd: is this hidden raid component
- *
- * Creating end device object, stored in ioc->sas_device_list.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd)
-{
-	Mpi2ConfigReply_t mpi_reply;
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	Mpi2SasEnclosurePage0_t enclosure_pg0;
-	struct _sas_device *sas_device;
-	u32 ioc_status;
-	__le64 sas_address;
-	u32 device_info;
-
-	if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
-	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-
-	sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
-
-	/* check if device is present */
-	if (!(le16_to_cpu(sas_device_pg0.Flags) &
-	    MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		printk(MPT2SAS_ERR_FMT "Flags = 0x%04x\n",
-		    ioc->name, le16_to_cpu(sas_device_pg0.Flags));
-		return -1;
-	}
-
-	/* check if there were any issues with discovery */
-	if (_scsih_check_access_status(ioc, sas_address, handle,
-	    sas_device_pg0.AccessStatus))
-		return -1;
-
-	/* check if this is end device */
-	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
-	if (!(_scsih_is_end_device(device_info))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-
-	sas_device = mpt2sas_get_sdev_by_addr(ioc,
-	    sas_address);
-
-	if (sas_device) {
-		sas_device_put(sas_device);
-		return 0;
-	}
-
-	sas_device = kzalloc(sizeof(struct _sas_device),
-	    GFP_KERNEL);
-	if (!sas_device) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-
-	kref_init(&sas_device->refcount);
-	sas_device->handle = handle;
-	if (_scsih_get_sas_address(ioc, le16_to_cpu
-		(sas_device_pg0.ParentDevHandle),
-		&sas_device->sas_address_parent) != 0)
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-	sas_device->enclosure_handle =
-	    le16_to_cpu(sas_device_pg0.EnclosureHandle);
-	sas_device->slot =
-	    le16_to_cpu(sas_device_pg0.Slot);
-	sas_device->device_info = device_info;
-	sas_device->sas_address = sas_address;
-	sas_device->phy = sas_device_pg0.PhyNum;
-
-	/* get enclosure_logical_id */
-	if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0(
-	   ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
-	   sas_device->enclosure_handle)))
-		sas_device->enclosure_logical_id =
-		    le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
-
-	/* get device name */
-	sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
-
-	if (ioc->wait_for_discovery_to_complete)
-		_scsih_sas_device_init_add(ioc, sas_device);
-	else
-		_scsih_sas_device_add(ioc, sas_device);
-
-	sas_device_put(sas_device);
-	return 0;
-}
-
-/**
- * _scsih_remove_device -  removing sas device object
- * @ioc: per adapter object
- * @sas_device_delete: the sas_device object
- *
- * Return nothing.
- */
-static void
-_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc,
-    struct _sas_device *sas_device)
-{
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-
-	if ((ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) &&
-		(sas_device->pfa_led_on)) {
-		_scsih_turn_off_pfa_led(ioc, sas_device);
-		sas_device->pfa_led_on = 0;
-	}
-
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: "
-	    "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
-		sas_device->handle, (unsigned long long)
-	    sas_device->sas_address));
-
-	if (sas_device->starget && sas_device->starget->hostdata) {
-		sas_target_priv_data = sas_device->starget->hostdata;
-		sas_target_priv_data->deleted = 1;
-		_scsih_ublock_io_device(ioc, sas_device->sas_address);
-		sas_target_priv_data->handle =
-		     MPT2SAS_INVALID_DEVICE_HANDLE;
-	}
-
-	if (!ioc->hide_drives)
-		mpt2sas_transport_port_remove(ioc,
-		    sas_device->sas_address,
-		    sas_device->sas_address_parent);
-
-	printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr"
-	    "(0x%016llx)\n", ioc->name, sas_device->handle,
-	    (unsigned long long) sas_device->sas_address);
-
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: "
-	    "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
-	    sas_device->handle, (unsigned long long)
-	    sas_device->sas_address));
-}
-/**
- * _scsih_device_remove_by_handle - removing device object by handle
- * @ioc: per adapter object
- * @handle: device handle
- *
- * Return nothing.
- */
-static void
-_scsih_device_remove_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct _sas_device *sas_device;
-	unsigned long flags;
-
-	if (ioc->shost_recovery)
-		return;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
-	if (sas_device) {
-		list_del_init(&sas_device->list);
-		sas_device_put(sas_device);
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	if (sas_device) {
-		_scsih_remove_device(ioc, sas_device);
-		sas_device_put(sas_device);
-	}
-}
-
-/**
- * mpt2sas_device_remove_by_sas_address - removing device object by sas address
- * @ioc: per adapter object
- * @sas_address: device sas_address
- *
- * Return nothing.
- */
-void
-mpt2sas_device_remove_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
-	u64 sas_address)
-{
-	struct _sas_device *sas_device;
-	unsigned long flags;
-
-	if (ioc->shost_recovery)
-		return;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_by_addr(ioc, sas_address);
-	if (sas_device) {
-		list_del_init(&sas_device->list);
-		sas_device_put(sas_device);
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	if (sas_device) {
-		_scsih_remove_device(ioc, sas_device);
-		sas_device_put(sas_device);
-	}
-}
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_sas_topology_change_event_debug - debug for topology event
- * @ioc: per adapter object
- * @event_data: event data payload
- * Context: user.
- */
-static void
-_scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventDataSasTopologyChangeList_t *event_data)
-{
-	int i;
-	u16 handle;
-	u16 reason_code;
-	u8 phy_number;
-	char *status_str = NULL;
-	u8 link_rate, prev_link_rate;
-
-	switch (event_data->ExpStatus) {
-	case MPI2_EVENT_SAS_TOPO_ES_ADDED:
-		status_str = "add";
-		break;
-	case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING:
-		status_str = "remove";
-		break;
-	case MPI2_EVENT_SAS_TOPO_ES_RESPONDING:
-	case 0:
-		status_str =  "responding";
-		break;
-	case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
-		status_str = "remove delay";
-		break;
-	default:
-		status_str = "unknown status";
-		break;
-	}
-	printk(MPT2SAS_INFO_FMT "sas topology change: (%s)\n",
-	    ioc->name, status_str);
-	printk(KERN_INFO "\thandle(0x%04x), enclosure_handle(0x%04x) "
-	    "start_phy(%02d), count(%d)\n",
-	    le16_to_cpu(event_data->ExpanderDevHandle),
-	    le16_to_cpu(event_data->EnclosureHandle),
-	    event_data->StartPhyNum, event_data->NumEntries);
-	for (i = 0; i < event_data->NumEntries; i++) {
-		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
-		if (!handle)
-			continue;
-		phy_number = event_data->StartPhyNum + i;
-		reason_code = event_data->PHY[i].PhyStatus &
-		    MPI2_EVENT_SAS_TOPO_RC_MASK;
-		switch (reason_code) {
-		case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
-			status_str = "target add";
-			break;
-		case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
-			status_str = "target remove";
-			break;
-		case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
-			status_str = "delay target remove";
-			break;
-		case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
-			status_str = "link rate change";
-			break;
-		case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
-			status_str = "target responding";
-			break;
-		default:
-			status_str = "unknown";
-			break;
-		}
-		link_rate = event_data->PHY[i].LinkRate >> 4;
-		prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
-		printk(KERN_INFO "\tphy(%02d), attached_handle(0x%04x): %s:"
-		    " link rate: new(0x%02x), old(0x%02x)\n", phy_number,
-		    handle, status_str, link_rate, prev_link_rate);
-
-	}
-}
-#endif
-
-/**
- * _scsih_sas_topology_change_event - handle topology changes
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- */
-static void
-_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
-    struct fw_event_work *fw_event)
-{
-	int i;
-	u16 parent_handle, handle;
-	u16 reason_code;
-	u8 phy_number, max_phys;
-	struct _sas_node *sas_expander;
-	u64 sas_address;
-	unsigned long flags;
-	u8 link_rate, prev_link_rate;
-	Mpi2EventDataSasTopologyChangeList_t *event_data =
-		(Mpi2EventDataSasTopologyChangeList_t *)
-		fw_event->event_data;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
-		_scsih_sas_topology_change_event_debug(ioc, event_data);
-#endif
-
-	if (ioc->remove_host || ioc->pci_error_recovery)
-		return;
-
-	if (!ioc->sas_hba.num_phys)
-		_scsih_sas_host_add(ioc);
-	else
-		_scsih_sas_host_refresh(ioc);
-
-	if (fw_event->ignore) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring expander "
-		    "event\n", ioc->name));
-		return;
-	}
-
-	parent_handle = le16_to_cpu(event_data->ExpanderDevHandle);
-
-	/* handle expander add */
-	if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED)
-		if (_scsih_expander_add(ioc, parent_handle) != 0)
-			return;
-
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
-	    parent_handle);
-	if (sas_expander) {
-		sas_address = sas_expander->sas_address;
-		max_phys = sas_expander->num_phys;
-	} else if (parent_handle < ioc->sas_hba.num_phys) {
-		sas_address = ioc->sas_hba.sas_address;
-		max_phys = ioc->sas_hba.num_phys;
-	} else {
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-		return;
-	}
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
-	/* handle siblings events */
-	for (i = 0; i < event_data->NumEntries; i++) {
-		if (fw_event->ignore) {
-			dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring "
-			    "expander event\n", ioc->name));
-			return;
-		}
-		if (ioc->shost_recovery || ioc->remove_host ||
-		    ioc->pci_error_recovery)
-			return;
-		phy_number = event_data->StartPhyNum + i;
-		if (phy_number >= max_phys)
-			continue;
-		reason_code = event_data->PHY[i].PhyStatus &
-		    MPI2_EVENT_SAS_TOPO_RC_MASK;
-		if ((event_data->PHY[i].PhyStatus &
-		    MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code !=
-		    MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
-			continue;
-		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
-		if (!handle)
-			continue;
-		link_rate = event_data->PHY[i].LinkRate >> 4;
-		prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
-		switch (reason_code) {
-		case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
-
-			if (ioc->shost_recovery)
-				break;
-
-			if (link_rate == prev_link_rate)
-				break;
-
-			mpt2sas_transport_update_links(ioc, sas_address,
-			    handle, phy_number, link_rate);
-
-			if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
-				break;
-
-			_scsih_check_device(ioc, handle);
-			break;
-		case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
-
-			if (ioc->shost_recovery)
-				break;
-
-			mpt2sas_transport_update_links(ioc, sas_address,
-			    handle, phy_number, link_rate);
-
-			_scsih_add_device(ioc, handle, phy_number, 0);
-			break;
-		case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
-
-			_scsih_device_remove_by_handle(ioc, handle);
-			break;
-		}
-	}
-
-	/* handle expander removal */
-	if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
-	    sas_expander)
-		mpt2sas_expander_remove(ioc, sas_address);
-
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_sas_device_status_change_event_debug - debug for device event
- * @event_data: event data payload
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventDataSasDeviceStatusChange_t *event_data)
-{
-	char *reason_str = NULL;
-
-	switch (event_data->ReasonCode) {
-	case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
-		reason_str = "smart data";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
-		reason_str = "unsupported device discovered";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
-		reason_str = "internal device reset";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
-		reason_str = "internal task abort";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
-		reason_str = "internal task abort set";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
-		reason_str = "internal clear task set";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
-		reason_str = "internal query task";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE:
-		reason_str = "sata init failure";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
-		reason_str = "internal device reset complete";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
-		reason_str = "internal task abort complete";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION:
-		reason_str = "internal async notification";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY:
-		reason_str = "expander reduced functionality";
-		break;
-	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY:
-		reason_str = "expander reduced functionality complete";
-		break;
-	default:
-		reason_str = "unknown reason";
-		break;
-	}
-	printk(MPT2SAS_INFO_FMT "device status change: (%s)\n"
-	    "\thandle(0x%04x), sas address(0x%016llx), tag(%d)",
-	    ioc->name, reason_str, le16_to_cpu(event_data->DevHandle),
-	    (unsigned long long)le64_to_cpu(event_data->SASAddress),
-	    le16_to_cpu(event_data->TaskTag));
-	if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA)
-		printk(MPT2SAS_INFO_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
-		    event_data->ASC, event_data->ASCQ);
-	printk(KERN_INFO "\n");
-}
-#endif
-
-/**
- * _scsih_sas_device_status_change_event - handle device status change
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
-    struct fw_event_work *fw_event)
-{
-	struct MPT2SAS_TARGET *target_priv_data;
-	struct _sas_device *sas_device;
-	u64 sas_address;
-	unsigned long flags;
-	Mpi2EventDataSasDeviceStatusChange_t *event_data =
-		(Mpi2EventDataSasDeviceStatusChange_t *)
-		fw_event->event_data;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
-		_scsih_sas_device_status_change_event_debug(ioc,
-		     event_data);
-#endif
-
-	/* In MPI Revision K (0xC), the internal device reset complete was
-	 * implemented, so avoid setting tm_busy flag for older firmware.
-	 */
-	if ((ioc->facts.HeaderVersion >> 8) < 0xC)
-		return;
-
-	if (event_data->ReasonCode !=
-	    MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
-	   event_data->ReasonCode !=
-	    MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
-		return;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_address = le64_to_cpu(event_data->SASAddress);
-	sas_device = __mpt2sas_get_sdev_by_addr(ioc,
-	    sas_address);
-
-	if (!sas_device || !sas_device->starget)
-		goto out;
-
-	target_priv_data = sas_device->starget->hostdata;
-	if (!target_priv_data)
-		goto out;
-
-	if (event_data->ReasonCode ==
-	    MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
-		target_priv_data->tm_busy = 1;
-	else
-		target_priv_data->tm_busy = 0;
-
-out:
-	if (sas_device)
-		sas_device_put(sas_device);
-
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure event
- * @ioc: per adapter object
- * @event_data: event data payload
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventDataSasEnclDevStatusChange_t *event_data)
-{
-	char *reason_str = NULL;
-
-	switch (event_data->ReasonCode) {
-	case MPI2_EVENT_SAS_ENCL_RC_ADDED:
-		reason_str = "enclosure add";
-		break;
-	case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING:
-		reason_str = "enclosure remove";
-		break;
-	default:
-		reason_str = "unknown reason";
-		break;
-	}
-
-	printk(MPT2SAS_INFO_FMT "enclosure status change: (%s)\n"
-	    "\thandle(0x%04x), enclosure logical id(0x%016llx)"
-	    " number slots(%d)\n", ioc->name, reason_str,
-	    le16_to_cpu(event_data->EnclosureHandle),
-	    (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
-	    le16_to_cpu(event_data->StartSlot));
-}
-#endif
-
-/**
- * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc,
-    struct fw_event_work *fw_event)
-{
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
-		_scsih_sas_enclosure_dev_status_change_event_debug(ioc,
-		     (Mpi2EventDataSasEnclDevStatusChange_t *)
-		     fw_event->event_data);
-#endif
-}
-
-/**
- * _scsih_sas_broadcast_primitive_event - handle broadcast events
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_broadcast_primitive_event(struct MPT2SAS_ADAPTER *ioc,
-    struct fw_event_work *fw_event)
-{
-	struct scsi_cmnd *scmd;
-	struct scsi_device *sdev;
-	u16 smid, handle;
-	u32 lun;
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	u32 termination_count;
-	u32 query_count;
-	Mpi2SCSITaskManagementReply_t *mpi_reply;
-	Mpi2EventDataSasBroadcastPrimitive_t *event_data =
-		(Mpi2EventDataSasBroadcastPrimitive_t *)
-		fw_event->event_data;
-	u16 ioc_status;
-	unsigned long flags;
-	int r;
-	u8 max_retries = 0;
-	u8 task_abort_retries;
-
-	mutex_lock(&ioc->tm_cmds.mutex);
-	pr_info(MPT2SAS_FMT
-		"%s: enter: phy number(%d), width(%d)\n",
-		ioc->name, __func__, event_data->PhyNum,
-		event_data->PortWidth);
-
-	_scsih_block_io_all_device(ioc);
-
-	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	mpi_reply = ioc->tm_cmds.reply;
-broadcast_aen_retry:
-
-	/* sanity checks for retrying this loop */
-	if (max_retries++ == 5) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: giving up\n",
-		    ioc->name, __func__));
-		goto out;
-	} else if (max_retries > 1)
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %d retry\n",
-		    ioc->name, __func__, max_retries - 1));
-
-	termination_count = 0;
-	query_count = 0;
-	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
-		if (ioc->shost_recovery)
-			goto out;
-		scmd = _scsih_scsi_lookup_get(ioc, smid);
-		if (!scmd)
-			continue;
-		sdev = scmd->device;
-		sas_device_priv_data = sdev->hostdata;
-		if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
-			continue;
-		 /* skip hidden raid components */
-		if (sas_device_priv_data->sas_target->flags &
-		    MPT_TARGET_FLAGS_RAID_COMPONENT)
-			continue;
-		 /* skip volumes */
-		if (sas_device_priv_data->sas_target->flags &
-		    MPT_TARGET_FLAGS_VOLUME)
-			continue;
-
-		handle = sas_device_priv_data->sas_target->handle;
-		lun = sas_device_priv_data->lun;
-		query_count++;
-
-		if (ioc->shost_recovery)
-			goto out;
-
-		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-		r = mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
-		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30,
-		    TM_MUTEX_OFF);
-		if (r == FAILED) {
-			sdev_printk(KERN_WARNING, sdev,
-			    "mpt2sas_scsih_issue_tm: FAILED when sending "
-			    "QUERY_TASK: scmd(%p)\n", scmd);
-			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-			goto broadcast_aen_retry;
-		}
-		ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
-		    & MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-			sdev_printk(KERN_WARNING, sdev, "query task: FAILED "
-			    "with IOCSTATUS(0x%04x), scmd(%p)\n", ioc_status,
-			    scmd);
-			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-			goto broadcast_aen_retry;
-		}
-
-		/* see if IO is still owned by IOC and target */
-		if (mpi_reply->ResponseCode ==
-		     MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
-		     mpi_reply->ResponseCode ==
-		     MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC) {
-			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-			continue;
-		}
-		task_abort_retries = 0;
- tm_retry:
-		if (task_abort_retries++ == 60) {
-			dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-			    "%s: ABORT_TASK: giving up\n", ioc->name,
-			    __func__));
-			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-			goto broadcast_aen_retry;
-		}
-
-		if (ioc->shost_recovery)
-			goto out_no_lock;
-
-		r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
-		    sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30,
-		    TM_MUTEX_OFF);
-		if (r == FAILED) {
-			sdev_printk(KERN_WARNING, sdev,
-			    "mpt2sas_scsih_issue_tm: ABORT_TASK: FAILED : "
-			    "scmd(%p)\n", scmd);
-			goto tm_retry;
-		}
-
-		if (task_abort_retries > 1)
-			sdev_printk(KERN_WARNING, sdev,
-			    "mpt2sas_scsih_issue_tm: ABORT_TASK: RETRIES (%d):"
-			    " scmd(%p)\n",
-			    task_abort_retries - 1, scmd);
-
-		termination_count += le32_to_cpu(mpi_reply->TerminationCount);
-		spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	}
-
-	if (ioc->broadcast_aen_pending) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: loop back due to"
-		     " pending AEN\n", ioc->name, __func__));
-		 ioc->broadcast_aen_pending = 0;
-		 goto broadcast_aen_retry;
-	}
-
- out:
-	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- out_no_lock:
-
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-	    "%s - exit, query_count = %d termination_count = %d\n",
-	    ioc->name, __func__, query_count, termination_count));
-
-	ioc->broadcast_aen_busy = 0;
-	if (!ioc->shost_recovery)
-		_scsih_ublock_io_all_device(ioc);
-	mutex_unlock(&ioc->tm_cmds.mutex);
-}
-
-/**
- * _scsih_sas_discovery_event - handle discovery events
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc,
-    struct fw_event_work *fw_event)
-{
-	Mpi2EventDataSasDiscovery_t *event_data =
-		(Mpi2EventDataSasDiscovery_t *)
-		fw_event->event_data;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
-		printk(MPT2SAS_INFO_FMT "discovery event: (%s)", ioc->name,
-		    (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
-		    "start" : "stop");
-	if (event_data->DiscoveryStatus)
-		printk("discovery_status(0x%08x)",
-		    le32_to_cpu(event_data->DiscoveryStatus));
-	printk("\n");
-	}
-#endif
-
-	if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
-	    !ioc->sas_hba.num_phys) {
-		if (disable_discovery > 0 && ioc->shost_recovery) {
-			/* Wait for the reset to complete */
-			while (ioc->shost_recovery)
-				ssleep(1);
-		}
-		_scsih_sas_host_add(ioc);
-	}
-}
-
-/**
- * _scsih_reprobe_lun - reprobing lun
- * @sdev: scsi device struct
- * @no_uld_attach: sdev->no_uld_attach flag setting
- *
- **/
-static void
-_scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
-{
-	int rc;
-
-	sdev->no_uld_attach = no_uld_attach ? 1 : 0;
-	sdev_printk(KERN_INFO, sdev, "%s raid component\n",
-	    sdev->no_uld_attach ? "hidding" : "exposing");
-	rc = scsi_device_reprobe(sdev);
-}
-
-/**
- * _scsih_sas_volume_add - add new volume
- * @ioc: per adapter object
- * @element: IR config element data
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventIrConfigElement_t *element)
-{
-	struct _raid_device *raid_device;
-	unsigned long flags;
-	u64 wwid;
-	u16 handle = le16_to_cpu(element->VolDevHandle);
-	int rc;
-
-	mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
-	if (!wwid) {
-		printk(MPT2SAS_ERR_FMT
-		    "failure at %s:%d/%s()!\n", ioc->name,
-		    __FILE__, __LINE__, __func__);
-		return;
-	}
-
-	spin_lock_irqsave(&ioc->raid_device_lock, flags);
-	raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid);
-	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-
-	if (raid_device)
-		return;
-
-	raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
-	if (!raid_device) {
-		printk(MPT2SAS_ERR_FMT
-		    "failure at %s:%d/%s()!\n", ioc->name,
-		    __FILE__, __LINE__, __func__);
-		return;
-	}
-
-	raid_device->id = ioc->sas_id++;
-	raid_device->channel = RAID_CHANNEL;
-	raid_device->handle = handle;
-	raid_device->wwid = wwid;
-	_scsih_raid_device_add(ioc, raid_device);
-	if (!ioc->wait_for_discovery_to_complete) {
-		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
-		    raid_device->id, 0);
-		if (rc)
-			_scsih_raid_device_remove(ioc, raid_device);
-	} else {
-		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		_scsih_determine_boot_device(ioc, raid_device, 1);
-		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-	}
-}
-
-/**
- * _scsih_sas_volume_delete - delete volume
- * @ioc: per adapter object
- * @handle: volume device handle
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
-	struct _raid_device *raid_device;
-	unsigned long flags;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	struct scsi_target *starget = NULL;
-
-	spin_lock_irqsave(&ioc->raid_device_lock, flags);
-	raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
-	if (raid_device) {
-		if (raid_device->starget) {
-			starget = raid_device->starget;
-			sas_target_priv_data = starget->hostdata;
-			sas_target_priv_data->deleted = 1;
-		}
-		printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
-		    "(0x%016llx)\n", ioc->name,  raid_device->handle,
-		    (unsigned long long) raid_device->wwid);
-		list_del(&raid_device->list);
-		kfree(raid_device);
-	}
-	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-	if (starget)
-		scsi_remove_target(&starget->dev);
-}
-
-/**
- * _scsih_sas_pd_expose - expose pd component to /dev/sdX
- * @ioc: per adapter object
- * @element: IR config element data
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_pd_expose(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventIrConfigElement_t *element)
-{
-	struct _sas_device *sas_device;
-	struct scsi_target *starget = NULL;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	unsigned long flags;
-	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
-	if (sas_device) {
-		sas_device->volume_handle = 0;
-		sas_device->volume_wwid = 0;
-		clear_bit(handle, ioc->pd_handles);
-		if (sas_device->starget && sas_device->starget->hostdata) {
-			starget = sas_device->starget;
-			sas_target_priv_data = starget->hostdata;
-			sas_target_priv_data->flags &=
-			    ~MPT_TARGET_FLAGS_RAID_COMPONENT;
-		}
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	if (!sas_device)
-		return;
-
-	/* exposing raid component */
-	if (starget)
-		starget_for_each_device(starget, NULL, _scsih_reprobe_lun);
-
-	sas_device_put(sas_device);
-}
-
-/**
- * _scsih_sas_pd_hide - hide pd component from /dev/sdX
- * @ioc: per adapter object
- * @element: IR config element data
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_pd_hide(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventIrConfigElement_t *element)
-{
-	struct _sas_device *sas_device;
-	struct scsi_target *starget = NULL;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	unsigned long flags;
-	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
-	u16 volume_handle = 0;
-	u64 volume_wwid = 0;
-
-	mpt2sas_config_get_volume_handle(ioc, handle, &volume_handle);
-	if (volume_handle)
-		mpt2sas_config_get_volume_wwid(ioc, volume_handle,
-		    &volume_wwid);
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_by_handle(ioc, handle);
-	if (sas_device) {
-		set_bit(handle, ioc->pd_handles);
-		if (sas_device->starget && sas_device->starget->hostdata) {
-			starget = sas_device->starget;
-			sas_target_priv_data = starget->hostdata;
-			sas_target_priv_data->flags |=
-			    MPT_TARGET_FLAGS_RAID_COMPONENT;
-			sas_device->volume_handle = volume_handle;
-			sas_device->volume_wwid = volume_wwid;
-		}
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	if (!sas_device)
-		return;
-
-	/* hiding raid component */
-	if (starget)
-		starget_for_each_device(starget, (void *)1, _scsih_reprobe_lun);
-
-	sas_device_put(sas_device);
-}
-
-/**
- * _scsih_sas_pd_delete - delete pd component
- * @ioc: per adapter object
- * @element: IR config element data
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_pd_delete(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventIrConfigElement_t *element)
-{
-	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
-
-	_scsih_device_remove_by_handle(ioc, handle);
-}
-
-/**
- * _scsih_sas_pd_add - remove pd component
- * @ioc: per adapter object
- * @element: IR config element data
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventIrConfigElement_t *element)
-{
-	struct _sas_device *sas_device;
-	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
-	Mpi2ConfigReply_t mpi_reply;
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	u32 ioc_status;
-	u64 sas_address;
-	u16 parent_handle;
-
-	set_bit(handle, ioc->pd_handles);
-
-	sas_device = mpt2sas_get_sdev_by_handle(ioc, handle);
-	if (sas_device) {
-		sas_device_put(sas_device);
-		return;
-	}
-
-	if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
-	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
-	}
-
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
-	}
-
-	parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
-	if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
-		mpt2sas_transport_update_links(ioc, sas_address, handle,
-		    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
-
-	_scsih_add_device(ioc, handle, 0, 1);
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
- * @ioc: per adapter object
- * @event_data: event data payload
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventDataIrConfigChangeList_t *event_data)
-{
-	Mpi2EventIrConfigElement_t *element;
-	u8 element_type;
-	int i;
-	char *reason_str = NULL, *element_str = NULL;
-
-	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
-
-	printk(MPT2SAS_INFO_FMT "raid config change: (%s), elements(%d)\n",
-	    ioc->name, (le32_to_cpu(event_data->Flags) &
-	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ?
-	    "foreign" : "native", event_data->NumElements);
-	for (i = 0; i < event_data->NumElements; i++, element++) {
-		switch (element->ReasonCode) {
-		case MPI2_EVENT_IR_CHANGE_RC_ADDED:
-			reason_str = "add";
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
-			reason_str = "remove";
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE:
-			reason_str = "no change";
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_HIDE:
-			reason_str = "hide";
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
-			reason_str = "unhide";
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
-			reason_str = "volume_created";
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
-			reason_str = "volume_deleted";
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
-			reason_str = "pd_created";
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
-			reason_str = "pd_deleted";
-			break;
-		default:
-			reason_str = "unknown reason";
-			break;
-		}
-		element_type = le16_to_cpu(element->ElementFlags) &
-		    MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK;
-		switch (element_type) {
-		case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT:
-			element_str = "volume";
-			break;
-		case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT:
-			element_str = "phys disk";
-			break;
-		case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT:
-			element_str = "hot spare";
-			break;
-		default:
-			element_str = "unknown element";
-			break;
-		}
-		printk(KERN_INFO "\t(%s:%s), vol handle(0x%04x), "
-		    "pd handle(0x%04x), pd num(0x%02x)\n", element_str,
-		    reason_str, le16_to_cpu(element->VolDevHandle),
-		    le16_to_cpu(element->PhysDiskDevHandle),
-		    element->PhysDiskNum);
-	}
-}
-#endif
-
-/**
- * _scsih_sas_ir_config_change_event - handle ir configuration change events
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc,
-    struct fw_event_work *fw_event)
-{
-	Mpi2EventIrConfigElement_t *element;
-	int i;
-	u8 foreign_config;
-	Mpi2EventDataIrConfigChangeList_t *event_data =
-		(Mpi2EventDataIrConfigChangeList_t *)
-		fw_event->event_data;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
-	    && !ioc->hide_ir_msg)
-		_scsih_sas_ir_config_change_event_debug(ioc, event_data);
-
-#endif
-
-	if (ioc->shost_recovery)
-		return;
-
-	foreign_config = (le32_to_cpu(event_data->Flags) &
-	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
-
-	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
-	for (i = 0; i < event_data->NumElements; i++, element++) {
-
-		switch (element->ReasonCode) {
-		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
-		case MPI2_EVENT_IR_CHANGE_RC_ADDED:
-			if (!foreign_config)
-				_scsih_sas_volume_add(ioc, element);
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
-		case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
-			if (!foreign_config)
-				_scsih_sas_volume_delete(ioc,
-				    le16_to_cpu(element->VolDevHandle));
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
-			if (!ioc->is_warpdrive)
-				_scsih_sas_pd_hide(ioc, element);
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
-			if (!ioc->is_warpdrive)
-				_scsih_sas_pd_expose(ioc, element);
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_HIDE:
-			if (!ioc->is_warpdrive)
-				_scsih_sas_pd_add(ioc, element);
-			break;
-		case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
-			if (!ioc->is_warpdrive)
-				_scsih_sas_pd_delete(ioc, element);
-			break;
-		}
-	}
-}
-
-/**
- * _scsih_sas_ir_volume_event - IR volume event
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc,
-    struct fw_event_work *fw_event)
-{
-	u64 wwid;
-	unsigned long flags;
-	struct _raid_device *raid_device;
-	u16 handle;
-	u32 state;
-	int rc;
-	Mpi2EventDataIrVolume_t *event_data =
-		(Mpi2EventDataIrVolume_t *)
-		fw_event->event_data;
-
-	if (ioc->shost_recovery)
-		return;
-
-	if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
-		return;
-
-	handle = le16_to_cpu(event_data->VolDevHandle);
-	state = le32_to_cpu(event_data->NewValue);
-	if (!ioc->hide_ir_msg)
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
-		    "old(0x%08x), new(0x%08x)\n", ioc->name, __func__,  handle,
-		    le32_to_cpu(event_data->PreviousValue), state));
-
-	switch (state) {
-	case MPI2_RAID_VOL_STATE_MISSING:
-	case MPI2_RAID_VOL_STATE_FAILED:
-		_scsih_sas_volume_delete(ioc, handle);
-		break;
-
-	case MPI2_RAID_VOL_STATE_ONLINE:
-	case MPI2_RAID_VOL_STATE_DEGRADED:
-	case MPI2_RAID_VOL_STATE_OPTIMAL:
-
-		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
-		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-
-		if (raid_device)
-			break;
-
-		mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
-		if (!wwid) {
-			printk(MPT2SAS_ERR_FMT
-			    "failure at %s:%d/%s()!\n", ioc->name,
-			    __FILE__, __LINE__, __func__);
-			break;
-		}
-
-		raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
-		if (!raid_device) {
-			printk(MPT2SAS_ERR_FMT
-			    "failure at %s:%d/%s()!\n", ioc->name,
-			    __FILE__, __LINE__, __func__);
-			break;
-		}
-
-		raid_device->id = ioc->sas_id++;
-		raid_device->channel = RAID_CHANNEL;
-		raid_device->handle = handle;
-		raid_device->wwid = wwid;
-		_scsih_raid_device_add(ioc, raid_device);
-		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
-		    raid_device->id, 0);
-		if (rc)
-			_scsih_raid_device_remove(ioc, raid_device);
-		break;
-
-	case MPI2_RAID_VOL_STATE_INITIALIZING:
-	default:
-		break;
-	}
-}
-
-/**
- * _scsih_sas_ir_physical_disk_event - PD event
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
-    struct fw_event_work *fw_event)
-{
-	u16 handle, parent_handle;
-	u32 state;
-	struct _sas_device *sas_device;
-	Mpi2ConfigReply_t mpi_reply;
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	u32 ioc_status;
-	Mpi2EventDataIrPhysicalDisk_t *event_data =
-		(Mpi2EventDataIrPhysicalDisk_t *)
-		fw_event->event_data;
-	u64 sas_address;
-
-	if (ioc->shost_recovery)
-		return;
-
-	if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
-		return;
-
-	handle = le16_to_cpu(event_data->PhysDiskDevHandle);
-	state = le32_to_cpu(event_data->NewValue);
-
-	if (!ioc->hide_ir_msg)
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
-		    "old(0x%08x), new(0x%08x)\n", ioc->name, __func__,  handle,
-		    le32_to_cpu(event_data->PreviousValue), state));
-
-	switch (state) {
-	case MPI2_RAID_PD_STATE_ONLINE:
-	case MPI2_RAID_PD_STATE_DEGRADED:
-	case MPI2_RAID_PD_STATE_REBUILDING:
-	case MPI2_RAID_PD_STATE_OPTIMAL:
-	case MPI2_RAID_PD_STATE_HOT_SPARE:
-
-		if (!ioc->is_warpdrive)
-			set_bit(handle, ioc->pd_handles);
-
-		sas_device = mpt2sas_get_sdev_by_handle(ioc, handle);
-		if (sas_device) {
-			sas_device_put(sas_device);
-			return;
-		}
-
-		if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
-		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
-		    handle))) {
-			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-			    ioc->name, __FILE__, __LINE__, __func__);
-			return;
-		}
-
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-			    ioc->name, __FILE__, __LINE__, __func__);
-			return;
-		}
-
-		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
-		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
-			mpt2sas_transport_update_links(ioc, sas_address, handle,
-			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
-
-		_scsih_add_device(ioc, handle, 0, 1);
-
-		break;
-
-	case MPI2_RAID_PD_STATE_OFFLINE:
-	case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
-	case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
-	default:
-		break;
-	}
-}
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-/**
- * _scsih_sas_ir_operation_status_event_debug - debug for IR op event
- * @ioc: per adapter object
- * @event_data: event data payload
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc,
-    Mpi2EventDataIrOperationStatus_t *event_data)
-{
-	char *reason_str = NULL;
-
-	switch (event_data->RAIDOperation) {
-	case MPI2_EVENT_IR_RAIDOP_RESYNC:
-		reason_str = "resync";
-		break;
-	case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION:
-		reason_str = "online capacity expansion";
-		break;
-	case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK:
-		reason_str = "consistency check";
-		break;
-	case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT:
-		reason_str = "background init";
-		break;
-	case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT:
-		reason_str = "make data consistent";
-		break;
-	}
-
-	if (!reason_str)
-		return;
-
-	printk(MPT2SAS_INFO_FMT "raid operational status: (%s)"
-	    "\thandle(0x%04x), percent complete(%d)\n",
-	    ioc->name, reason_str,
-	    le16_to_cpu(event_data->VolDevHandle),
-	    event_data->PercentComplete);
-}
-#endif
-
-/**
- * _scsih_sas_ir_operation_status_event - handle RAID operation events
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc,
-    struct fw_event_work *fw_event)
-{
-	Mpi2EventDataIrOperationStatus_t *event_data =
-		(Mpi2EventDataIrOperationStatus_t *)
-		fw_event->event_data;
-	static struct _raid_device *raid_device;
-	unsigned long flags;
-	u16 handle;
-
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
-	    && !ioc->hide_ir_msg)
-		_scsih_sas_ir_operation_status_event_debug(ioc,
-		     event_data);
-#endif
-
-	/* code added for raid transport support */
-	if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
-
-		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		handle = le16_to_cpu(event_data->VolDevHandle);
-		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
-		if (raid_device)
-			raid_device->percent_complete =
-			    event_data->PercentComplete;
-		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-	}
-}
-
-/**
- * _scsih_prep_device_scan - initialize parameters prior to device scan
- * @ioc: per adapter object
- *
- * Set the deleted flag prior to device scan.  If the device is found during
- * the scan, then we clear the deleted flag.
- */
-static void
-_scsih_prep_device_scan(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct MPT2SAS_DEVICE *sas_device_priv_data;
-	struct scsi_device *sdev;
-
-	shost_for_each_device(sdev, ioc->shost) {
-		sas_device_priv_data = sdev->hostdata;
-		if (sas_device_priv_data && sas_device_priv_data->sas_target)
-			sas_device_priv_data->sas_target->deleted = 1;
-	}
-}
-
-/**
- * _scsih_mark_responding_sas_device - mark a sas_devices as responding
- * @ioc: per adapter object
- * @sas_address: sas address
- * @slot: enclosure slot id
- * @handle: device handle
- *
- * After host reset, find out whether devices are still responding.
- * Used in _scsi_remove_unresponsive_sas_devices.
- *
- * Return nothing.
- */
-static void
-_scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
-    u16 slot, u16 handle)
-{
-	struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
-	struct scsi_target *starget;
-	struct _sas_device *sas_device;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
-		if (sas_device->sas_address == sas_address &&
-		    sas_device->slot == slot) {
-			sas_device->responding = 1;
-			starget = sas_device->starget;
-			if (starget && starget->hostdata) {
-				sas_target_priv_data = starget->hostdata;
-				sas_target_priv_data->tm_busy = 0;
-				sas_target_priv_data->deleted = 0;
-			} else
-				sas_target_priv_data = NULL;
-			if (starget)
-				starget_printk(KERN_INFO, starget,
-				    "handle(0x%04x), sas_addr(0x%016llx), "
-				    "enclosure logical id(0x%016llx), "
-				    "slot(%d)\n", handle,
-				    (unsigned long long)sas_device->sas_address,
-				    (unsigned long long)
-				    sas_device->enclosure_logical_id,
-				    sas_device->slot);
-			if (sas_device->handle == handle)
-				goto out;
-			printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
-			    sas_device->handle);
-			sas_device->handle = handle;
-			if (sas_target_priv_data)
-				sas_target_priv_data->handle = handle;
-			goto out;
-		}
-	}
- out:
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-}
-
-/**
- * _scsih_search_responding_sas_devices -
- * @ioc: per adapter object
- *
- * After host reset, find out whether devices are still responding.
- * If not remove.
- *
- * Return nothing.
- */
-static void
-_scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
-{
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	Mpi2ConfigReply_t mpi_reply;
-	u16 ioc_status;
-	__le64 sas_address;
-	u16 handle;
-	u32 device_info;
-	u16 slot;
-
-	printk(MPT2SAS_INFO_FMT "search for end-devices: start\n", ioc->name);
-
-	if (list_empty(&ioc->sas_device_list))
-		goto out;
-
-	handle = 0xFFFF;
-	while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
-	    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
-	    handle))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
-			break;
-		handle = le16_to_cpu(sas_device_pg0.DevHandle);
-		device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
-		if (!(_scsih_is_end_device(device_info)))
-			continue;
-		sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
-		slot = le16_to_cpu(sas_device_pg0.Slot);
-		_scsih_mark_responding_sas_device(ioc, sas_address, slot,
-		    handle);
-	}
-out:
-	printk(MPT2SAS_INFO_FMT "search for end-devices: complete\n",
-	    ioc->name);
-}
-
-/**
- * _scsih_mark_responding_raid_device - mark a raid_device as responding
- * @ioc: per adapter object
- * @wwid: world wide identifier for raid volume
- * @handle: device handle
- *
- * After host reset, find out whether devices are still responding.
- * Used in _scsi_remove_unresponsive_raid_devices.
- *
- * Return nothing.
- */
-static void
-_scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid,
-    u16 handle)
-{
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	struct scsi_target *starget;
-	struct _raid_device *raid_device;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->raid_device_lock, flags);
-	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
-		if (raid_device->wwid == wwid && raid_device->starget) {
-			starget = raid_device->starget;
-			if (starget && starget->hostdata) {
-				sas_target_priv_data = starget->hostdata;
-				sas_target_priv_data->deleted = 0;
-			} else
-				sas_target_priv_data = NULL;
-			raid_device->responding = 1;
-			spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-			starget_printk(KERN_INFO, raid_device->starget,
-			    "handle(0x%04x), wwid(0x%016llx)\n", handle,
-			    (unsigned long long)raid_device->wwid);
-			/*
-			 * WARPDRIVE: The handles of the PDs might have changed
-			 * across the host reset so re-initialize the
-			 * required data for Direct IO
-			 */
-			_scsih_init_warpdrive_properties(ioc, raid_device);
-			spin_lock_irqsave(&ioc->raid_device_lock, flags);
-			if (raid_device->handle == handle) {
-				spin_unlock_irqrestore(&ioc->raid_device_lock,
-				    flags);
-				return;
-			}
-			printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
-			    raid_device->handle);
-			raid_device->handle = handle;
-			if (sas_target_priv_data)
-				sas_target_priv_data->handle = handle;
-			spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-			return;
-		}
-	}
-
-	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-}
-
-/**
- * _scsih_search_responding_raid_devices -
- * @ioc: per adapter object
- *
- * After host reset, find out whether devices are still responding.
- * If not remove.
- *
- * Return nothing.
- */
-static void
-_scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc)
-{
-	Mpi2RaidVolPage1_t volume_pg1;
-	Mpi2RaidVolPage0_t volume_pg0;
-	Mpi2RaidPhysDiskPage0_t pd_pg0;
-	Mpi2ConfigReply_t mpi_reply;
-	u16 ioc_status;
-	u16 handle;
-	u8 phys_disk_num;
-
-	if (!ioc->ir_firmware)
-		return;
-
-	printk(MPT2SAS_INFO_FMT "search for raid volumes: start\n",
-	    ioc->name);
-
-	if (list_empty(&ioc->raid_device_list))
-		goto out;
-
-	handle = 0xFFFF;
-	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
-	    &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
-			break;
-		handle = le16_to_cpu(volume_pg1.DevHandle);
-
-		if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
-		    &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
-		     sizeof(Mpi2RaidVolPage0_t)))
-			continue;
-
-		if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
-		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
-		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED)
-			_scsih_mark_responding_raid_device(ioc,
-			    le64_to_cpu(volume_pg1.WWID), handle);
-	}
-
-	/* refresh the pd_handles */
-	if (!ioc->is_warpdrive) {
-		phys_disk_num = 0xFF;
-		memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
-		while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
-		    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
-		    phys_disk_num))) {
-			ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-			    MPI2_IOCSTATUS_MASK;
-			if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
-				break;
-			phys_disk_num = pd_pg0.PhysDiskNum;
-			handle = le16_to_cpu(pd_pg0.DevHandle);
-			set_bit(handle, ioc->pd_handles);
-		}
-	}
-out:
-	printk(MPT2SAS_INFO_FMT "search for responding raid volumes: "
-	    "complete\n", ioc->name);
-}
-
-/**
- * _scsih_mark_responding_expander - mark a expander as responding
- * @ioc: per adapter object
- * @sas_address: sas address
- * @handle:
- *
- * After host reset, find out whether devices are still responding.
- * Used in _scsi_remove_unresponsive_expanders.
- *
- * Return nothing.
- */
-static void
-_scsih_mark_responding_expander(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
-     u16 handle)
-{
-	struct _sas_node *sas_expander;
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
-		if (sas_expander->sas_address != sas_address)
-			continue;
-		sas_expander->responding = 1;
-		if (sas_expander->handle == handle)
-			goto out;
-		printk(KERN_INFO "\texpander(0x%016llx): handle changed"
-		    " from(0x%04x) to (0x%04x)!!!\n",
-		    (unsigned long long)sas_expander->sas_address,
-		    sas_expander->handle, handle);
-		sas_expander->handle = handle;
-		for (i = 0 ; i < sas_expander->num_phys ; i++)
-			sas_expander->phy[i].handle = handle;
-		goto out;
-	}
- out:
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-}
-
-/**
- * _scsih_search_responding_expanders -
- * @ioc: per adapter object
- *
- * After host reset, find out whether devices are still responding.
- * If not remove.
- *
- * Return nothing.
- */
-static void
-_scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc)
-{
-	Mpi2ExpanderPage0_t expander_pg0;
-	Mpi2ConfigReply_t mpi_reply;
-	u16 ioc_status;
-	u64 sas_address;
-	u16 handle;
-
-	printk(MPT2SAS_INFO_FMT "search for expanders: start\n", ioc->name);
-
-	if (list_empty(&ioc->sas_expander_list))
-		goto out;
-
-	handle = 0xFFFF;
-	while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
-	    MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
-
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
-			break;
-
-		handle = le16_to_cpu(expander_pg0.DevHandle);
-		sas_address = le64_to_cpu(expander_pg0.SASAddress);
-		printk(KERN_INFO "\texpander present: handle(0x%04x), "
-		    "sas_addr(0x%016llx)\n", handle,
-		    (unsigned long long)sas_address);
-		_scsih_mark_responding_expander(ioc, sas_address, handle);
-	}
-
- out:
-	printk(MPT2SAS_INFO_FMT "search for expanders: complete\n", ioc->name);
-}
-
-/**
- * _scsih_remove_unresponding_sas_devices - removing unresponding devices
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct _sas_device *sas_device, *sas_device_next;
-	struct _sas_node *sas_expander, *sas_expander_next;
-	struct _raid_device *raid_device, *raid_device_next;
-	struct list_head tmp_list;
-	unsigned long flags;
-	LIST_HEAD(head);
-
-	printk(MPT2SAS_INFO_FMT "removing unresponding devices: start\n",
-	    ioc->name);
-
-	/* removing unresponding end devices */
-	printk(MPT2SAS_INFO_FMT "removing unresponding devices: end-devices\n",
-	    ioc->name);
-
-	/*
-	 * Iterate, pulling off devices marked as non-responding. We become the
-	 * owner for the reference the list had on any object we prune.
-	 */
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	list_for_each_entry_safe(sas_device, sas_device_next,
-			&ioc->sas_device_list, list) {
-		if (!sas_device->responding)
-			list_move_tail(&sas_device->list, &head);
-		else
-			sas_device->responding = 0;
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	/*
-	 * Now, uninitialize and remove the unresponding devices we pruned.
-	 */
-	list_for_each_entry_safe(sas_device, sas_device_next, &head, list) {
-		_scsih_remove_device(ioc, sas_device);
-		list_del_init(&sas_device->list);
-		sas_device_put(sas_device);
-	}
-
-	/* removing unresponding volumes */
-	if (ioc->ir_firmware) {
-		printk(MPT2SAS_INFO_FMT "removing unresponding devices: "
-		    "volumes\n", ioc->name);
-		list_for_each_entry_safe(raid_device, raid_device_next,
-		    &ioc->raid_device_list, list) {
-			if (!raid_device->responding)
-				_scsih_sas_volume_delete(ioc,
-				    raid_device->handle);
-			else
-				raid_device->responding = 0;
-		}
-	}
-	/* removing unresponding expanders */
-	printk(MPT2SAS_INFO_FMT "removing unresponding devices: expanders\n",
-	    ioc->name);
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	INIT_LIST_HEAD(&tmp_list);
-	list_for_each_entry_safe(sas_expander, sas_expander_next,
-	    &ioc->sas_expander_list, list) {
-		if (!sas_expander->responding)
-			list_move_tail(&sas_expander->list, &tmp_list);
-		else
-			sas_expander->responding = 0;
-	}
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-	list_for_each_entry_safe(sas_expander, sas_expander_next, &tmp_list,
-	    list) {
-		list_del(&sas_expander->list);
-		_scsih_expander_node_remove(ioc, sas_expander);
-	}
-	printk(MPT2SAS_INFO_FMT "removing unresponding devices: complete\n",
-	    ioc->name);
-	/* unblock devices */
-	_scsih_ublock_io_all_device(ioc);
-}
-
-static void
-_scsih_refresh_expander_links(struct MPT2SAS_ADAPTER *ioc,
-	struct _sas_node *sas_expander, u16 handle)
-{
-	Mpi2ExpanderPage1_t expander_pg1;
-	Mpi2ConfigReply_t mpi_reply;
-	int i;
-
-	for (i = 0 ; i < sas_expander->num_phys ; i++) {
-		if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
-		    &expander_pg1, i, handle))) {
-			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-			    ioc->name, __FILE__, __LINE__, __func__);
-			return;
-		}
-
-		mpt2sas_transport_update_links(ioc, sas_expander->sas_address,
-		    le16_to_cpu(expander_pg1.AttachedDevHandle), i,
-		    expander_pg1.NegotiatedLinkRate >> 4);
-	}
-}
-
-/**
- * _scsih_scan_for_devices_after_reset - scan for devices after host reset
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
-{
-	Mpi2ExpanderPage0_t expander_pg0;
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	Mpi2RaidVolPage1_t volume_pg1;
-	Mpi2RaidVolPage0_t volume_pg0;
-	Mpi2RaidPhysDiskPage0_t pd_pg0;
-	Mpi2EventIrConfigElement_t element;
-	Mpi2ConfigReply_t mpi_reply;
-	u8 phys_disk_num;
-	u16 ioc_status;
-	u16 handle, parent_handle;
-	u64 sas_address;
-	struct _sas_device *sas_device;
-	struct _sas_node *expander_device;
-	static struct _raid_device *raid_device;
-	u8 retry_count;
-	unsigned long flags;
-
-	printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name);
-
-	_scsih_sas_host_refresh(ioc);
-
-	printk(MPT2SAS_INFO_FMT "\tscan devices: expanders start\n",
-		ioc->name);
-	/* expanders */
-	handle = 0xFFFF;
-	while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
-	    MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-			printk(MPT2SAS_INFO_FMT "\tbreak from expander scan: "
-				"ioc_status(0x%04x), loginfo(0x%08x)\n",
-				ioc->name, ioc_status,
-				le32_to_cpu(mpi_reply.IOCLogInfo));
-			break;
-		}
-		handle = le16_to_cpu(expander_pg0.DevHandle);
-		spin_lock_irqsave(&ioc->sas_node_lock, flags);
-		expander_device = mpt2sas_scsih_expander_find_by_sas_address(
-		    ioc, le64_to_cpu(expander_pg0.SASAddress));
-		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-		if (expander_device)
-			_scsih_refresh_expander_links(ioc, expander_device,
-			    handle);
-		else {
-			printk(MPT2SAS_INFO_FMT "\tBEFORE adding expander: "
-				"handle (0x%04x), sas_addr(0x%016llx)\n",
-				ioc->name, handle, (unsigned long long)
-				le64_to_cpu(expander_pg0.SASAddress));
-			_scsih_expander_add(ioc, handle);
-			printk(MPT2SAS_INFO_FMT "\tAFTER adding expander: "
-				"handle (0x%04x), sas_addr(0x%016llx)\n",
-				ioc->name, handle, (unsigned long long)
-				le64_to_cpu(expander_pg0.SASAddress));
-		}
-	}
-
-	printk(MPT2SAS_INFO_FMT "\tscan devices: expanders complete\n",
-		ioc->name);
-
-	if (!ioc->ir_firmware)
-		goto skip_to_sas;
-
-	printk(MPT2SAS_INFO_FMT "\tscan devices phys disk start\n", ioc->name);
-	/* phys disk */
-	phys_disk_num = 0xFF;
-	while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
-	    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
-	    phys_disk_num))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-			printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan:"
-				"ioc_status(0x%04x), loginfo(0x%08x)\n",
-				ioc->name, ioc_status,
-				le32_to_cpu(mpi_reply.IOCLogInfo));
-			break;
-		}
-		phys_disk_num = pd_pg0.PhysDiskNum;
-		handle = le16_to_cpu(pd_pg0.DevHandle);
-		sas_device = mpt2sas_get_sdev_by_handle(ioc, handle);
-		if (sas_device) {
-			sas_device_put(sas_device);
-			continue;
-		}
-		if (mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
-		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
-		    handle) != 0)
-			continue;
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-			MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-			printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan "
-				"ioc_status(0x%04x), loginfo(0x%08x)\n",
-				ioc->name, ioc_status,
-				le32_to_cpu(mpi_reply.IOCLogInfo));
-			break;
-		}
-		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
-		if (!_scsih_get_sas_address(ioc, parent_handle,
-		    &sas_address)) {
-			printk(MPT2SAS_INFO_FMT "\tBEFORE adding phys disk: "
-				" handle (0x%04x), sas_addr(0x%016llx)\n",
-				ioc->name, handle, (unsigned long long)
-				le64_to_cpu(sas_device_pg0.SASAddress));
-			mpt2sas_transport_update_links(ioc, sas_address,
-			    handle, sas_device_pg0.PhyNum,
-			    MPI2_SAS_NEG_LINK_RATE_1_5);
-			set_bit(handle, ioc->pd_handles);
-			retry_count = 0;
-			/* This will retry adding the end device.
-			* _scsih_add_device() will decide on retries and
-			* return "1" when it should be retried
-			*/
-			while (_scsih_add_device(ioc, handle, retry_count++,
-				1)) {
-					ssleep(1);
-			}
-			printk(MPT2SAS_INFO_FMT "\tAFTER adding phys disk: "
-				" handle (0x%04x), sas_addr(0x%016llx)\n",
-				ioc->name, handle, (unsigned long long)
-				le64_to_cpu(sas_device_pg0.SASAddress));
-		}
-	}
-
-	printk(MPT2SAS_INFO_FMT "\tscan devices: phys disk complete\n",
-		ioc->name);
-
-	printk(MPT2SAS_INFO_FMT "\tscan devices: volumes start\n", ioc->name);
-	/* volumes */
-	handle = 0xFFFF;
-	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
-	    &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-			printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
-				"ioc_status(0x%04x), loginfo(0x%08x)\n",
-				ioc->name, ioc_status,
-				le32_to_cpu(mpi_reply.IOCLogInfo));
-			break;
-		}
-		handle = le16_to_cpu(volume_pg1.DevHandle);
-		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		raid_device = _scsih_raid_device_find_by_wwid(ioc,
-		    le64_to_cpu(volume_pg1.WWID));
-		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-		if (raid_device)
-			continue;
-		if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
-		    &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
-		     sizeof(Mpi2RaidVolPage0_t)))
-			continue;
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-			MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-			printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
-				"ioc_status(0x%04x), loginfo(0x%08x)\n",
-				ioc->name, ioc_status,
-				le32_to_cpu(mpi_reply.IOCLogInfo));
-			break;
-		}
-		if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
-		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
-		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
-			memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
-			element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
-			element.VolDevHandle = volume_pg1.DevHandle;
-			printk(MPT2SAS_INFO_FMT "\tBEFORE adding volume: "
-				" handle (0x%04x)\n", ioc->name,
-				volume_pg1.DevHandle);
-			_scsih_sas_volume_add(ioc, &element);
-			printk(MPT2SAS_INFO_FMT "\tAFTER adding volume: "
-				" handle (0x%04x)\n", ioc->name,
-				volume_pg1.DevHandle);
-		}
-	}
-
-	printk(MPT2SAS_INFO_FMT "\tscan devices: volumes complete\n",
-		ioc->name);
-
- skip_to_sas:
-
-	printk(MPT2SAS_INFO_FMT "\tscan devices: end devices start\n",
-		ioc->name);
-	/* sas devices */
-	handle = 0xFFFF;
-	while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
-	    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
-	    handle))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-			printk(MPT2SAS_INFO_FMT "\tbreak from end device scan:"
-				" ioc_status(0x%04x), loginfo(0x%08x)\n",
-				ioc->name, ioc_status,
-				le32_to_cpu(mpi_reply.IOCLogInfo));
-				break;
-		}
-		handle = le16_to_cpu(sas_device_pg0.DevHandle);
-		if (!(_scsih_is_end_device(
-		    le32_to_cpu(sas_device_pg0.DeviceInfo))))
-			continue;
-		sas_device = mpt2sas_get_sdev_by_addr(ioc,
-		    le64_to_cpu(sas_device_pg0.SASAddress));
-		if (sas_device) {
-			sas_device_put(sas_device);
-			continue;
-		}
-		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
-		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
-			printk(MPT2SAS_INFO_FMT "\tBEFORE adding end device: "
-				"handle (0x%04x), sas_addr(0x%016llx)\n",
-				ioc->name, handle, (unsigned long long)
-				le64_to_cpu(sas_device_pg0.SASAddress));
-			mpt2sas_transport_update_links(ioc, sas_address, handle,
-			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
-			retry_count = 0;
-			/* This will retry adding the end device.
-			 * _scsih_add_device() will decide on retries and
-			 * return "1" when it should be retried
-			 */
-			while (_scsih_add_device(ioc, handle, retry_count++,
-				0)) {
-					ssleep(1);
-			}
-			printk(MPT2SAS_INFO_FMT "\tAFTER adding end device: "
-				"handle (0x%04x), sas_addr(0x%016llx)\n",
-				ioc->name, handle, (unsigned long long)
-				le64_to_cpu(sas_device_pg0.SASAddress));
-		}
-	}
-
-	printk(MPT2SAS_INFO_FMT "\tscan devices: end devices complete\n",
-		ioc->name);
-
-	printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name);
-}
-
-
-/**
- * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
- * @ioc: per adapter object
- * @reset_phase: phase
- *
- * The handler for doing any required cleanup or initialization.
- *
- * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
- * MPT2_IOC_DONE_RESET
- *
- * Return nothing.
- */
-void
-mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
-{
-	switch (reset_phase) {
-	case MPT2_IOC_PRE_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
-		break;
-	case MPT2_IOC_AFTER_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
-		if (ioc->scsih_cmds.status & MPT2_CMD_PENDING) {
-			ioc->scsih_cmds.status |= MPT2_CMD_RESET;
-			mpt2sas_base_free_smid(ioc, ioc->scsih_cmds.smid);
-			complete(&ioc->scsih_cmds.done);
-		}
-		if (ioc->tm_cmds.status & MPT2_CMD_PENDING) {
-			ioc->tm_cmds.status |= MPT2_CMD_RESET;
-			mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid);
-			complete(&ioc->tm_cmds.done);
-		}
-		_scsih_fw_event_cleanup_queue(ioc);
-		_scsih_flush_running_cmds(ioc);
-		break;
-	case MPT2_IOC_DONE_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-		    "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
-		_scsih_sas_host_refresh(ioc);
-		_scsih_prep_device_scan(ioc);
-		_scsih_search_responding_sas_devices(ioc);
-		_scsih_search_responding_raid_devices(ioc);
-		_scsih_search_responding_expanders(ioc);
-		if ((!ioc->is_driver_loading) && !(disable_discovery > 0 &&
-		    !ioc->sas_hba.num_phys)) {
-			_scsih_prep_device_scan(ioc);
-			_scsih_search_responding_sas_devices(ioc);
-			_scsih_search_responding_raid_devices(ioc);
-			_scsih_search_responding_expanders(ioc);
-			_scsih_error_recovery_delete_devices(ioc);
-		}
-		break;
-	}
-}
-
-/**
- * _firmware_event_work - delayed task for processing firmware events
- * @ioc: per adapter object
- * @work: equal to the fw_event_work object
- * Context: user.
- *
- * Return nothing.
- */
-static void
-_firmware_event_work(struct work_struct *work)
-{
-	struct fw_event_work *fw_event = container_of(work,
-	    struct fw_event_work, delayed_work.work);
-	struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
-
-	_scsih_fw_event_del_from_list(ioc, fw_event);
-
-	/* the queue is being flushed so ignore this event */
-	if (ioc->remove_host || ioc->pci_error_recovery) {
-		fw_event_work_put(fw_event);
-		return;
-	}
-
-	switch (fw_event->event) {
-	case MPT2SAS_REMOVE_UNRESPONDING_DEVICES:
-		while (scsi_host_in_recovery(ioc->shost) ||
-				ioc->shost_recovery) {
-			/*
-			 * If we're unloading, bail. Otherwise, this can become
-			 * an infinite loop.
-			 */
-			if (ioc->remove_host)
-				goto out;
-
-			ssleep(1);
-		}
-		_scsih_remove_unresponding_sas_devices(ioc);
-		_scsih_scan_for_devices_after_reset(ioc);
-		break;
-	case MPT2SAS_PORT_ENABLE_COMPLETE:
-		ioc->start_scan = 0;
-
-		if (missing_delay[0] != -1 && missing_delay[1] != -1)
-			mpt2sas_base_update_missing_delay(ioc, missing_delay[0],
-				missing_delay[1]);
-
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete "
-		    "from worker thread\n", ioc->name));
-		break;
-	case MPT2SAS_TURN_ON_PFA_LED:
-		_scsih_turn_on_pfa_led(ioc, fw_event->device_handle);
-		break;
-	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
-		_scsih_sas_topology_change_event(ioc, fw_event);
-		break;
-	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
-		_scsih_sas_device_status_change_event(ioc,
-		    fw_event);
-		break;
-	case MPI2_EVENT_SAS_DISCOVERY:
-		_scsih_sas_discovery_event(ioc,
-		    fw_event);
-		break;
-	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
-		_scsih_sas_broadcast_primitive_event(ioc,
-		    fw_event);
-		break;
-	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
-		_scsih_sas_enclosure_dev_status_change_event(ioc,
-		    fw_event);
-		break;
-	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
-		_scsih_sas_ir_config_change_event(ioc, fw_event);
-		break;
-	case MPI2_EVENT_IR_VOLUME:
-		_scsih_sas_ir_volume_event(ioc, fw_event);
-		break;
-	case MPI2_EVENT_IR_PHYSICAL_DISK:
-		_scsih_sas_ir_physical_disk_event(ioc, fw_event);
-		break;
-	case MPI2_EVENT_IR_OPERATION_STATUS:
-		_scsih_sas_ir_operation_status_event(ioc, fw_event);
-		break;
-	}
-out:
-	fw_event_work_put(fw_event);
-}
-
-/**
- * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time)
- * @ioc: per adapter object
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- * Context: interrupt.
- *
- * This function merely adds a new work task into ioc->firmware_event_thread.
- * The tasks are worked from _firmware_event_work in user context.
- *
- * Returns void.
- */
-void
-mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
-	u32 reply)
-{
-	struct fw_event_work *fw_event;
-	Mpi2EventNotificationReply_t *mpi_reply;
-	u16 event;
-	u16 sz;
-
-	/* events turned off due to host reset or driver unloading */
-	if (ioc->remove_host || ioc->pci_error_recovery)
-		return;
-
-	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-
-	if (unlikely(!mpi_reply)) {
-		printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
-	}
-
-	event = le16_to_cpu(mpi_reply->Event);
-
-	switch (event) {
-	/* handle these */
-	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
-	{
-		Mpi2EventDataSasBroadcastPrimitive_t *baen_data =
-		    (Mpi2EventDataSasBroadcastPrimitive_t *)
-		    mpi_reply->EventData;
-
-		if (baen_data->Primitive !=
-		    MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT)
-			return;
-
-		if (ioc->broadcast_aen_busy) {
-			ioc->broadcast_aen_pending++;
-			return;
-		} else
-			ioc->broadcast_aen_busy = 1;
-		break;
-	}
-
-	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
-		_scsih_check_topo_delete_events(ioc,
-		    (Mpi2EventDataSasTopologyChangeList_t *)
-		    mpi_reply->EventData);
-		break;
-	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
-		_scsih_check_ir_config_unhide_events(ioc,
-		    (Mpi2EventDataIrConfigChangeList_t *)
-		    mpi_reply->EventData);
-		break;
-	case MPI2_EVENT_IR_VOLUME:
-		_scsih_check_volume_delete_events(ioc,
-		    (Mpi2EventDataIrVolume_t *)
-		    mpi_reply->EventData);
-		break;
-	case MPI2_EVENT_LOG_ENTRY_ADDED:
-	{
-		Mpi2EventDataLogEntryAdded_t *log_entry;
-		__le32 *log_code;
-
-		if (!ioc->is_warpdrive)
-			break;
-
-		log_entry = (Mpi2EventDataLogEntryAdded_t *)
-		    mpi_reply->EventData;
-		log_code = (__le32 *)log_entry->LogData;
-
-		if (le16_to_cpu(log_entry->LogEntryQualifier)
-		    != MPT2_WARPDRIVE_LOGENTRY)
-			break;
-
-		switch (le32_to_cpu(*log_code)) {
-		case MPT2_WARPDRIVE_LC_SSDT:
-			printk(MPT2SAS_WARN_FMT "WarpDrive Warning: "
-			    "IO Throttling has occurred in the WarpDrive "
-			    "subsystem. Check WarpDrive documentation for "
-			    "additional details.\n", ioc->name);
-			break;
-		case MPT2_WARPDRIVE_LC_SSDLW:
-			printk(MPT2SAS_WARN_FMT "WarpDrive Warning: "
-			    "Program/Erase Cycles for the WarpDrive subsystem "
-			    "in degraded range. Check WarpDrive documentation "
-			    "for additional details.\n", ioc->name);
-			break;
-		case MPT2_WARPDRIVE_LC_SSDLF:
-			printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: "
-			    "There are no Program/Erase Cycles for the "
-			    "WarpDrive subsystem. The storage device will be "
-			    "in read-only mode. Check WarpDrive documentation "
-			    "for additional details.\n", ioc->name);
-			break;
-		case MPT2_WARPDRIVE_LC_BRMF:
-			printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: "
-			    "The Backup Rail Monitor has failed on the "
-			    "WarpDrive subsystem. Check WarpDrive "
-			    "documentation for additional details.\n",
-			    ioc->name);
-			break;
-		}
-
-		break;
-	}
-	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
-	case MPI2_EVENT_IR_OPERATION_STATUS:
-	case MPI2_EVENT_SAS_DISCOVERY:
-	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
-	case MPI2_EVENT_IR_PHYSICAL_DISK:
-		break;
-
-	case MPI2_EVENT_TEMP_THRESHOLD:
-		_scsih_temp_threshold_events(ioc,
-			(Mpi2EventDataTemperature_t *)
-			mpi_reply->EventData);
-		break;
-
-	default: /* ignore the rest */
-		return;
-	}
-
-	sz = le16_to_cpu(mpi_reply->EventDataLength) * 4;
-	fw_event = alloc_fw_event_work(sz);
-	if (!fw_event) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
-	}
-
-	memcpy(fw_event->event_data, mpi_reply->EventData, sz);
-	fw_event->ioc = ioc;
-	fw_event->VF_ID = mpi_reply->VF_ID;
-	fw_event->VP_ID = mpi_reply->VP_ID;
-	fw_event->event = event;
-	_scsih_fw_event_add(ioc, fw_event);
-	fw_event_work_put(fw_event);
-	return;
-}
-
-/* shost template */
-static struct scsi_host_template scsih_driver_template = {
-	.module				= THIS_MODULE,
-	.name				= "Fusion MPT SAS Host",
-	.proc_name			= MPT2SAS_DRIVER_NAME,
-	.queuecommand			= _scsih_qcmd,
-	.target_alloc			= _scsih_target_alloc,
-	.slave_alloc			= _scsih_slave_alloc,
-	.slave_configure		= _scsih_slave_configure,
-	.target_destroy			= _scsih_target_destroy,
-	.slave_destroy			= _scsih_slave_destroy,
-	.scan_finished			= _scsih_scan_finished,
-	.scan_start			= _scsih_scan_start,
-	.change_queue_depth 		= _scsih_change_queue_depth,
-	.eh_abort_handler		= _scsih_abort,
-	.eh_device_reset_handler	= _scsih_dev_reset,
-	.eh_target_reset_handler	= _scsih_target_reset,
-	.eh_host_reset_handler		= _scsih_host_reset,
-	.bios_param			= _scsih_bios_param,
-	.can_queue			= 1,
-	.this_id			= -1,
-	.sg_tablesize			= MPT2SAS_SG_DEPTH,
-	.max_sectors			= 32767,
-	.cmd_per_lun			= 7,
-	.use_clustering			= ENABLE_CLUSTERING,
-	.shost_attrs			= mpt2sas_host_attrs,
-	.sdev_attrs			= mpt2sas_dev_attrs,
-	.track_queue_depth		= 1,
-};
-
-/**
- * _scsih_expander_node_remove - removing expander device from list.
- * @ioc: per adapter object
- * @sas_expander: the sas_device object
- * Context: Calling function should acquire ioc->sas_node_lock.
- *
- * Removing object and freeing associated memory from the
- * ioc->sas_expander_list.
- *
- * Return nothing.
- */
-static void
-_scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
-    struct _sas_node *sas_expander)
-{
-	struct _sas_port *mpt2sas_port, *next;
-
-	/* remove sibling ports attached to this expander */
-	list_for_each_entry_safe(mpt2sas_port, next,
-	   &sas_expander->sas_port_list, port_list) {
-		if (ioc->shost_recovery)
-			return;
-		if (mpt2sas_port->remote_identify.device_type ==
-		    SAS_END_DEVICE)
-			mpt2sas_device_remove_by_sas_address(ioc,
-			    mpt2sas_port->remote_identify.sas_address);
-		else if (mpt2sas_port->remote_identify.device_type ==
-		    SAS_EDGE_EXPANDER_DEVICE ||
-		    mpt2sas_port->remote_identify.device_type ==
-		    SAS_FANOUT_EXPANDER_DEVICE)
-			mpt2sas_expander_remove(ioc,
-			    mpt2sas_port->remote_identify.sas_address);
-	}
-
-	mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
-	    sas_expander->sas_address_parent);
-
-	printk(MPT2SAS_INFO_FMT "expander_remove: handle"
-	   "(0x%04x), sas_addr(0x%016llx)\n", ioc->name,
-	    sas_expander->handle, (unsigned long long)
-	    sas_expander->sas_address);
-
-	kfree(sas_expander->phy);
-	kfree(sas_expander);
-}
-
-/**
- * _scsih_ir_shutdown - IR shutdown notification
- * @ioc: per adapter object
- *
- * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
- * the host system is shutting down.
- *
- * Return nothing.
- */
-static void
-_scsih_ir_shutdown(struct MPT2SAS_ADAPTER *ioc)
-{
-	Mpi2RaidActionRequest_t *mpi_request;
-	Mpi2RaidActionReply_t *mpi_reply;
-	u16 smid;
-
-	/* is IR firmware build loaded ? */
-	if (!ioc->ir_firmware)
-		return;
-
-	mutex_lock(&ioc->scsih_cmds.mutex);
-
-	if (ioc->scsih_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: scsih_cmd in use\n",
-		    ioc->name, __func__);
-		goto out;
-	}
-	ioc->scsih_cmds.status = MPT2_CMD_PENDING;
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->scsih_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
-		goto out;
-	}
-
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->scsih_cmds.smid = smid;
-	memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
-
-	mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
-	mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
-
-	if (!ioc->hide_ir_msg)
-		printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name);
-	init_completion(&ioc->scsih_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
-
-	if (!(ioc->scsih_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
-		    ioc->name, __func__);
-		goto out;
-	}
-
-	if (ioc->scsih_cmds.status & MPT2_CMD_REPLY_VALID) {
-		mpi_reply = ioc->scsih_cmds.reply;
-
-		if (!ioc->hide_ir_msg)
-			printk(MPT2SAS_INFO_FMT "IR shutdown (complete): "
-			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
-			    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
-			    le32_to_cpu(mpi_reply->IOCLogInfo));
-	}
-
- out:
-	ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
-	mutex_unlock(&ioc->scsih_cmds.mutex);
-}
-
-/**
- * _scsih_shutdown - routine call during system shutdown
- * @pdev: PCI device struct
- *
- * Return nothing.
- */
-static void
-_scsih_shutdown(struct pci_dev *pdev)
-{
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	struct workqueue_struct	*wq;
-	unsigned long flags;
-
-	ioc->remove_host = 1;
-	_scsih_fw_event_cleanup_queue(ioc);
-
-	spin_lock_irqsave(&ioc->fw_event_lock, flags);
-	wq = ioc->firmware_event_thread;
-	ioc->firmware_event_thread = NULL;
-	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
-	if (wq)
-		destroy_workqueue(wq);
-
-	_scsih_ir_shutdown(ioc);
-	mpt2sas_base_detach(ioc);
-}
-
-/**
- * _scsih_remove - detach and remove add host
- * @pdev: PCI device struct
- *
- * Routine called when unloading the driver.
- * Return nothing.
- */
-static void
-_scsih_remove(struct pci_dev *pdev)
-{
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	struct _sas_port *mpt2sas_port, *next_port;
-	struct _raid_device *raid_device, *next;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
-	struct workqueue_struct	*wq;
-	unsigned long flags;
-
-	ioc->remove_host = 1;
-	_scsih_fw_event_cleanup_queue(ioc);
-
-	spin_lock_irqsave(&ioc->fw_event_lock, flags);
-	wq = ioc->firmware_event_thread;
-	ioc->firmware_event_thread = NULL;
-	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
-	if (wq)
-		destroy_workqueue(wq);
-
-	/* release all the volumes */
-	_scsih_ir_shutdown(ioc);
-	list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
-	    list) {
-		if (raid_device->starget) {
-			sas_target_priv_data =
-			    raid_device->starget->hostdata;
-			sas_target_priv_data->deleted = 1;
-			scsi_remove_target(&raid_device->starget->dev);
-		}
-		printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
-		    "(0x%016llx)\n", ioc->name,  raid_device->handle,
-		    (unsigned long long) raid_device->wwid);
-		_scsih_raid_device_remove(ioc, raid_device);
-	}
-
-	/* free ports attached to the sas_host */
-	list_for_each_entry_safe(mpt2sas_port, next_port,
-	   &ioc->sas_hba.sas_port_list, port_list) {
-		if (mpt2sas_port->remote_identify.device_type ==
-		    SAS_END_DEVICE)
-			mpt2sas_device_remove_by_sas_address(ioc,
-			    mpt2sas_port->remote_identify.sas_address);
-		else if (mpt2sas_port->remote_identify.device_type ==
-		    SAS_EDGE_EXPANDER_DEVICE ||
-		    mpt2sas_port->remote_identify.device_type ==
-		    SAS_FANOUT_EXPANDER_DEVICE)
-			mpt2sas_expander_remove(ioc,
-			    mpt2sas_port->remote_identify.sas_address);
-	}
-
-	/* free phys attached to the sas_host */
-	if (ioc->sas_hba.num_phys) {
-		kfree(ioc->sas_hba.phy);
-		ioc->sas_hba.phy = NULL;
-		ioc->sas_hba.num_phys = 0;
-	}
-
-	sas_remove_host(shost);
-	scsi_remove_host(shost);
-	mpt2sas_base_detach(ioc);
-	spin_lock(&gioc_lock);
-	list_del(&ioc->list);
-	spin_unlock(&gioc_lock);
-	scsi_host_put(shost);
-}
-
-/**
- * _scsih_probe_boot_devices - reports 1st device
- * @ioc: per adapter object
- *
- * If specified in bios page 2, this routine reports the 1st
- * device scsi-ml or sas transport for persistent boot device
- * purposes.  Please refer to function _scsih_determine_boot_device()
- */
-static void
-_scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
-{
-	u8 is_raid;
-	void *device;
-	struct _sas_device *sas_device;
-	struct _raid_device *raid_device;
-	u16 handle;
-	u64 sas_address_parent;
-	u64 sas_address;
-	unsigned long flags;
-	int rc;
-
-	 /* no Bios, return immediately */
-	if (!ioc->bios_pg3.BiosVersion)
-		return;
-
-	device = NULL;
-	is_raid = 0;
-	if (ioc->req_boot_device.device) {
-		device =  ioc->req_boot_device.device;
-		is_raid = ioc->req_boot_device.is_raid;
-	} else if (ioc->req_alt_boot_device.device) {
-		device =  ioc->req_alt_boot_device.device;
-		is_raid = ioc->req_alt_boot_device.is_raid;
-	} else if (ioc->current_boot_device.device) {
-		device =  ioc->current_boot_device.device;
-		is_raid = ioc->current_boot_device.is_raid;
-	}
-
-	if (!device)
-		return;
-
-	if (is_raid) {
-		raid_device = device;
-		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
-		    raid_device->id, 0);
-		if (rc)
-			_scsih_raid_device_remove(ioc, raid_device);
-	} else {
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = device;
-		handle = sas_device->handle;
-		sas_address_parent = sas_device->sas_address_parent;
-		sas_address = sas_device->sas_address;
-		list_move_tail(&sas_device->list, &ioc->sas_device_list);
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-		if (ioc->hide_drives)
-			return;
-		if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
-		    sas_device->sas_address_parent)) {
-			_scsih_sas_device_remove(ioc, sas_device);
-		} else if (!sas_device->starget) {
-			if (!ioc->is_driver_loading) {
-				mpt2sas_transport_port_remove(ioc,
-					sas_address,
-					sas_address_parent);
-				_scsih_sas_device_remove(ioc, sas_device);
-			}
-		}
-	}
-}
-
-/**
- * _scsih_probe_raid - reporting raid volumes to scsi-ml
- * @ioc: per adapter object
- *
- * Called during initial loading of the driver.
- */
-static void
-_scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct _raid_device *raid_device, *raid_next;
-	int rc;
-
-	list_for_each_entry_safe(raid_device, raid_next,
-	    &ioc->raid_device_list, list) {
-		if (raid_device->starget)
-			continue;
-		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
-		    raid_device->id, 0);
-		if (rc)
-			_scsih_raid_device_remove(ioc, raid_device);
-	}
-}
-
-static struct _sas_device *get_next_sas_device(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct _sas_device *sas_device = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	if (!list_empty(&ioc->sas_device_init_list)) {
-		sas_device = list_first_entry(&ioc->sas_device_init_list,
-				struct _sas_device, list);
-		sas_device_get(sas_device);
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	return sas_device;
-}
-
-static void sas_device_make_active(struct MPT2SAS_ADAPTER *ioc,
-		struct _sas_device *sas_device)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-
-	/*
-	 * Since we dropped the lock during the call to port_add(), we need to
-	 * be careful here that somebody else didn't move or delete this item
-	 * while we were busy with other things.
-	 *
-	 * If it was on the list, we need a put() for the reference the list
-	 * had. Either way, we need a get() for the destination list.
-	 */
-	if (!list_empty(&sas_device->list)) {
-		list_del_init(&sas_device->list);
-		sas_device_put(sas_device);
-	}
-
-	sas_device_get(sas_device);
-	list_add_tail(&sas_device->list, &ioc->sas_device_list);
-
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-}
-
-/**
- * _scsih_probe_sas - reporting sas devices to sas transport
- * @ioc: per adapter object
- *
- * Called during initial loading of the driver.
- */
-static void
-_scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct _sas_device *sas_device;
-
-	if (ioc->hide_drives)
-		return;
-
-	while ((sas_device = get_next_sas_device(ioc))) {
-		if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
-				sas_device->sas_address_parent)) {
-			_scsih_sas_device_remove(ioc, sas_device);
-			sas_device_put(sas_device);
-			continue;
-		} else if (!sas_device->starget) {
-			if (!ioc->is_driver_loading) {
-				mpt2sas_transport_port_remove(ioc,
-						sas_device->sas_address,
-						sas_device->sas_address_parent);
-				_scsih_sas_device_remove(ioc, sas_device);
-				sas_device_put(sas_device);
-				continue;
-			}
-		}
-
-		sas_device_make_active(ioc, sas_device);
-		sas_device_put(sas_device);
-	}
-}
-
-/**
- * _scsih_probe_devices - probing for devices
- * @ioc: per adapter object
- *
- * Called during initial loading of the driver.
- */
-static void
-_scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
-{
-	u16 volume_mapping_flags;
-
-	if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
-		return;  /* return when IOC doesn't support initiator mode */
-
-	_scsih_probe_boot_devices(ioc);
-
-	if (ioc->ir_firmware) {
-		volume_mapping_flags =
-		    le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
-		    MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
-		if (volume_mapping_flags ==
-		    MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
-			_scsih_probe_raid(ioc);
-			_scsih_probe_sas(ioc);
-		} else {
-			_scsih_probe_sas(ioc);
-			_scsih_probe_raid(ioc);
-		}
-	} else
-		_scsih_probe_sas(ioc);
-}
-
-
-/**
- * _scsih_scan_start - scsi lld callback for .scan_start
- * @shost: SCSI host pointer
- *
- * The shost has the ability to discover targets on its own instead
- * of scanning the entire bus.  In our implemention, we will kick off
- * firmware discovery.
- */
-static void
-_scsih_scan_start(struct Scsi_Host *shost)
-{
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	int rc;
-
-	if (diag_buffer_enable != -1 && diag_buffer_enable != 0)
-		mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
-
-	if (disable_discovery > 0)
-		return;
-
-	ioc->start_scan = 1;
-	rc = mpt2sas_port_enable(ioc);
-
-	if (rc != 0)
-		printk(MPT2SAS_INFO_FMT "port enable: FAILED\n", ioc->name);
-}
-
-/**
- * _scsih_scan_finished - scsi lld callback for .scan_finished
- * @shost: SCSI host pointer
- * @time: elapsed time of the scan in jiffies
- *
- * This function will be called periodically until it returns 1 with the
- * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
- * we wait for firmware discovery to complete, then return 1.
- */
-static int
-_scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
-{
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	if (disable_discovery > 0) {
-		ioc->is_driver_loading = 0;
-		ioc->wait_for_discovery_to_complete = 0;
-		return 1;
-	}
-
-	if (time >= (300 * HZ)) {
-		ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-		printk(MPT2SAS_INFO_FMT "port enable: FAILED with timeout "
-		    "(timeout=300s)\n", ioc->name);
-		ioc->is_driver_loading = 0;
-		return 1;
-	}
-
-	if (ioc->start_scan)
-		return 0;
-
-	if (ioc->start_scan_failed) {
-		printk(MPT2SAS_INFO_FMT "port enable: FAILED with "
-		    "(ioc_status=0x%08x)\n", ioc->name, ioc->start_scan_failed);
-		ioc->is_driver_loading = 0;
-		ioc->wait_for_discovery_to_complete = 0;
-		ioc->remove_host = 1;
-		return 1;
-	}
-
-	printk(MPT2SAS_INFO_FMT "port enable: SUCCESS\n", ioc->name);
-	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-
-	if (ioc->wait_for_discovery_to_complete) {
-		ioc->wait_for_discovery_to_complete = 0;
-		_scsih_probe_devices(ioc);
-	}
-	mpt2sas_base_start_watchdog(ioc);
-	ioc->is_driver_loading = 0;
-	return 1;
-}
-
-
-/**
- * _scsih_probe - attach and add scsi host
- * @pdev: PCI device struct
- * @id: pci device id
- *
- * Returns 0 success, anything else error.
- */
-static int
-_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
-	struct MPT2SAS_ADAPTER *ioc;
-	struct Scsi_Host *shost;
-	int rv;
-
-	shost = scsi_host_alloc(&scsih_driver_template,
-	    sizeof(struct MPT2SAS_ADAPTER));
-	if (!shost)
-		return -ENODEV;
-
-	/* init local params */
-	ioc = shost_priv(shost);
-	memset(ioc, 0, sizeof(struct MPT2SAS_ADAPTER));
-	INIT_LIST_HEAD(&ioc->list);
-	spin_lock(&gioc_lock);
-	list_add_tail(&ioc->list, &mpt2sas_ioc_list);
-	spin_unlock(&gioc_lock);
-	ioc->shost = shost;
-	ioc->id = mpt_ids++;
-	sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id);
-	ioc->pdev = pdev;
-	if (id->device == MPI2_MFGPAGE_DEVID_SSS6200) {
-		ioc->is_warpdrive = 1;
-		ioc->hide_ir_msg = 1;
-	} else
-		ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
-	ioc->scsi_io_cb_idx = scsi_io_cb_idx;
-	ioc->tm_cb_idx = tm_cb_idx;
-	ioc->ctl_cb_idx = ctl_cb_idx;
-	ioc->base_cb_idx = base_cb_idx;
-	ioc->port_enable_cb_idx = port_enable_cb_idx;
-	ioc->transport_cb_idx = transport_cb_idx;
-	ioc->scsih_cb_idx = scsih_cb_idx;
-	ioc->config_cb_idx = config_cb_idx;
-	ioc->tm_tr_cb_idx = tm_tr_cb_idx;
-	ioc->tm_tr_volume_cb_idx = tm_tr_volume_cb_idx;
-	ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
-	ioc->logging_level = logging_level;
-	ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds;
-	/* misc semaphores and spin locks */
-	mutex_init(&ioc->reset_in_progress_mutex);
-	/* initializing pci_access_mutex lock */
-	mutex_init(&ioc->pci_access_mutex);
-	spin_lock_init(&ioc->ioc_reset_in_progress_lock);
-	spin_lock_init(&ioc->scsi_lookup_lock);
-	spin_lock_init(&ioc->sas_device_lock);
-	spin_lock_init(&ioc->sas_node_lock);
-	spin_lock_init(&ioc->fw_event_lock);
-	spin_lock_init(&ioc->raid_device_lock);
-
-	INIT_LIST_HEAD(&ioc->sas_device_list);
-	INIT_LIST_HEAD(&ioc->sas_device_init_list);
-	INIT_LIST_HEAD(&ioc->sas_expander_list);
-	INIT_LIST_HEAD(&ioc->fw_event_list);
-	INIT_LIST_HEAD(&ioc->raid_device_list);
-	INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
-	INIT_LIST_HEAD(&ioc->delayed_tr_list);
-	INIT_LIST_HEAD(&ioc->delayed_tr_volume_list);
-	INIT_LIST_HEAD(&ioc->reply_queue_list);
-
-	/* init shost parameters */
-	shost->max_cmd_len = 32;
-	shost->max_lun = max_lun;
-	shost->transportt = mpt2sas_transport_template;
-	shost->unique_id = ioc->id;
-
-	if (max_sectors != 0xFFFF) {
-		if (max_sectors < 64) {
-			shost->max_sectors = 64;
-			printk(MPT2SAS_WARN_FMT "Invalid value %d passed "
-			    "for max_sectors, range is 64 to 32767. Assigning "
-			    "value of 64.\n", ioc->name, max_sectors);
-		} else if (max_sectors > 32767) {
-			shost->max_sectors = 32767;
-			printk(MPT2SAS_WARN_FMT "Invalid value %d passed "
-			    "for max_sectors, range is 64 to 8192. Assigning "
-			    "default value of 32767.\n", ioc->name,
-			    max_sectors);
-		} else {
-			shost->max_sectors = max_sectors & 0xFFFE;
-			printk(MPT2SAS_INFO_FMT "The max_sectors value is "
-			    "set to %d\n", ioc->name, shost->max_sectors);
-		}
-	}
-
-	/* register EEDP capabilities with SCSI layer */
-	if (prot_mask)
-		scsi_host_set_prot(shost, prot_mask);
-	else
-		scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
-				   | SHOST_DIF_TYPE2_PROTECTION
-				   | SHOST_DIF_TYPE3_PROTECTION);
-
-	scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
-
-	/* event thread */
-	snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
-	    "fw_event%d", ioc->id);
-	ioc->firmware_event_thread = create_singlethread_workqueue(
-	    ioc->firmware_event_name);
-	if (!ioc->firmware_event_thread) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rv = -ENODEV;
-		goto out_thread_fail;
-	}
-
-	ioc->is_driver_loading = 1;
-	if ((mpt2sas_base_attach(ioc))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rv = -ENODEV;
-		goto out_attach_fail;
-	}
-
-	if (ioc->is_warpdrive) {
-		if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS)
-			ioc->hide_drives = 0;
-		else if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_HIDE_ALL_DISKS)
-			ioc->hide_drives = 1;
-		else {
-			if (_scsih_get_num_volumes(ioc))
-				ioc->hide_drives = 1;
-			else
-				ioc->hide_drives = 0;
-		}
-	} else
-		ioc->hide_drives = 0;
-
-	rv = scsi_add_host(shost, &pdev->dev);
-	if (rv) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out_add_shost_fail;
-	}
-
-	scsi_scan_host(shost);
-
-	return 0;
-
- out_add_shost_fail:
-	mpt2sas_base_detach(ioc);
- out_attach_fail:
-	destroy_workqueue(ioc->firmware_event_thread);
- out_thread_fail:
-	spin_lock(&gioc_lock);
-	list_del(&ioc->list);
-	spin_unlock(&gioc_lock);
-	scsi_host_put(shost);
-	return rv;
-}
-
-#ifdef CONFIG_PM
-/**
- * _scsih_suspend - power management suspend main entry point
- * @pdev: PCI device struct
- * @state: PM state change to (usually PCI_D3)
- *
- * Returns 0 success, anything else error.
- */
-static int
-_scsih_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	pci_power_t device_state;
-
-	mpt2sas_base_stop_watchdog(ioc);
-	scsi_block_requests(shost);
-	_scsih_ir_shutdown(ioc);
-	device_state = pci_choose_state(pdev, state);
-	printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering "
-	    "operating state [D%d]\n", ioc->name, pdev,
-	    pci_name(pdev), device_state);
-
-	mpt2sas_base_free_resources(ioc);
-	pci_save_state(pdev);
-	pci_set_power_state(pdev, device_state);
-	return 0;
-}
-
-/**
- * _scsih_resume - power management resume main entry point
- * @pdev: PCI device struct
- *
- * Returns 0 success, anything else error.
- */
-static int
-_scsih_resume(struct pci_dev *pdev)
-{
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	pci_power_t device_state = pdev->current_state;
-	int r;
-
-	printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous "
-	    "operating state [D%d]\n", ioc->name, pdev,
-	    pci_name(pdev), device_state);
-
-	pci_set_power_state(pdev, PCI_D0);
-	pci_enable_wake(pdev, PCI_D0, 0);
-	pci_restore_state(pdev);
-	ioc->pdev = pdev;
-	r = mpt2sas_base_map_resources(ioc);
-	if (r)
-		return r;
-
-	mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
-	scsi_unblock_requests(shost);
-	mpt2sas_base_start_watchdog(ioc);
-	return 0;
-}
-#endif /* CONFIG_PM */
-
-/**
- * _scsih_pci_error_detected - Called when a PCI error is detected.
- * @pdev: PCI device struct
- * @state: PCI channel state
- *
- * Description: Called when a PCI error is detected.
- *
- * Return value:
- *      PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
- */
-static pci_ers_result_t
-_scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
-{
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	printk(MPT2SAS_INFO_FMT "PCI error: detected callback, state(%d)!!\n",
-	    ioc->name, state);
-
-	switch (state) {
-	case pci_channel_io_normal:
-		return PCI_ERS_RESULT_CAN_RECOVER;
-	case pci_channel_io_frozen:
-		/* Fatal error, prepare for slot reset */
-		ioc->pci_error_recovery = 1;
-		scsi_block_requests(ioc->shost);
-		mpt2sas_base_stop_watchdog(ioc);
-		mpt2sas_base_free_resources(ioc);
-		return PCI_ERS_RESULT_NEED_RESET;
-	case pci_channel_io_perm_failure:
-		/* Permanent error, prepare for device removal */
-		ioc->pci_error_recovery = 1;
-		mpt2sas_base_stop_watchdog(ioc);
-		_scsih_flush_running_cmds(ioc);
-		return PCI_ERS_RESULT_DISCONNECT;
-	}
-	return PCI_ERS_RESULT_NEED_RESET;
-}
-
-/**
- * _scsih_pci_slot_reset - Called when PCI slot has been reset.
- * @pdev: PCI device struct
- *
- * Description: This routine is called by the pci error recovery
- * code after the PCI slot has been reset, just before we
- * should resume normal operations.
- */
-static pci_ers_result_t
-_scsih_pci_slot_reset(struct pci_dev *pdev)
-{
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	int rc;
-
-	printk(MPT2SAS_INFO_FMT "PCI error: slot reset callback!!\n",
-		ioc->name);
-
-	ioc->pci_error_recovery = 0;
-	ioc->pdev = pdev;
-	pci_restore_state(pdev);
-	rc = mpt2sas_base_map_resources(ioc);
-	if (rc)
-		return PCI_ERS_RESULT_DISCONNECT;
-
-
-	rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-	    FORCE_BIG_HAMMER);
-
-	printk(MPT2SAS_WARN_FMT "hard reset: %s\n", ioc->name,
-	    (rc == 0) ? "success" : "failed");
-
-	if (!rc)
-		return PCI_ERS_RESULT_RECOVERED;
-	else
-		return PCI_ERS_RESULT_DISCONNECT;
-}
-
-/**
- * _scsih_pci_resume() - resume normal ops after PCI reset
- * @pdev: pointer to PCI device
- *
- * Called when the error recovery driver tells us that its
- * OK to resume normal operation. Use completion to allow
- * halted scsi ops to resume.
- */
-static void
-_scsih_pci_resume(struct pci_dev *pdev)
-{
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	printk(MPT2SAS_INFO_FMT "PCI error: resume callback!!\n", ioc->name);
-
-	pci_cleanup_aer_uncorrect_error_status(pdev);
-	mpt2sas_base_start_watchdog(ioc);
-	scsi_unblock_requests(ioc->shost);
-}
-
-/**
- * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
- * @pdev: pointer to PCI device
- */
-static pci_ers_result_t
-_scsih_pci_mmio_enabled(struct pci_dev *pdev)
-{
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	printk(MPT2SAS_INFO_FMT "PCI error: mmio enabled callback!!\n",
-	    ioc->name);
-
-	/* TODO - dump whatever for debugging purposes */
-
-	/* Request a slot reset. */
-	return PCI_ERS_RESULT_NEED_RESET;
-}
-
-static const struct pci_error_handlers _scsih_err_handler = {
-	.error_detected = _scsih_pci_error_detected,
-	.mmio_enabled = _scsih_pci_mmio_enabled,
-	.slot_reset =	_scsih_pci_slot_reset,
-	.resume =	_scsih_pci_resume,
-};
-
-static struct pci_driver scsih_driver = {
-	.name		= MPT2SAS_DRIVER_NAME,
-	.id_table	= scsih_pci_table,
-	.probe		= _scsih_probe,
-	.remove		= _scsih_remove,
-	.shutdown	= _scsih_shutdown,
-	.err_handler	= &_scsih_err_handler,
-#ifdef CONFIG_PM
-	.suspend	= _scsih_suspend,
-	.resume		= _scsih_resume,
-#endif
-};
-
-/* raid transport support */
-static struct raid_function_template mpt2sas_raid_functions = {
-	.cookie		= &scsih_driver_template,
-	.is_raid	= _scsih_is_raid,
-	.get_resync	= _scsih_get_resync,
-	.get_state	= _scsih_get_state,
-};
-
-/**
- * _scsih_init - main entry point for this driver.
- *
- * Returns 0 success, anything else error.
- */
-static int __init
-_scsih_init(void)
-{
-	int error;
-
-	mpt_ids = 0;
-	printk(KERN_INFO "%s version %s loaded\n", MPT2SAS_DRIVER_NAME,
-	    MPT2SAS_DRIVER_VERSION);
-
-	mpt2sas_transport_template =
-	    sas_attach_transport(&mpt2sas_transport_functions);
-	if (!mpt2sas_transport_template)
-		return -ENODEV;
-	/* raid transport support */
-	mpt2sas_raid_template = raid_class_attach(&mpt2sas_raid_functions);
-	if (!mpt2sas_raid_template) {
-		sas_release_transport(mpt2sas_transport_template);
-		return -ENODEV;
-	}
-
-	mpt2sas_base_initialize_callback_handler();
-
-	 /* queuecommand callback hander */
-	scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done);
-
-	/* task management callback handler */
-	tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done);
-
-	/* base internal commands callback handler */
-	base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
-	port_enable_cb_idx = mpt2sas_base_register_callback_handler(
-		mpt2sas_port_enable_done);
-
-	/* transport internal commands callback handler */
-	transport_cb_idx = mpt2sas_base_register_callback_handler(
-	    mpt2sas_transport_done);
-
-	/* scsih internal commands callback handler */
-	scsih_cb_idx = mpt2sas_base_register_callback_handler(_scsih_done);
-
-	/* configuration page API internal commands callback handler */
-	config_cb_idx = mpt2sas_base_register_callback_handler(
-	    mpt2sas_config_done);
-
-	/* ctl module callback handler */
-	ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done);
-
-	tm_tr_cb_idx = mpt2sas_base_register_callback_handler(
-	    _scsih_tm_tr_complete);
-
-	tm_tr_volume_cb_idx = mpt2sas_base_register_callback_handler(
-	    _scsih_tm_volume_tr_complete);
-
-	tm_sas_control_cb_idx = mpt2sas_base_register_callback_handler(
-	    _scsih_sas_control_complete);
-
-	mpt2sas_ctl_init();
-
-	error = pci_register_driver(&scsih_driver);
-	if (error) {
-		/* raid transport support */
-		raid_class_release(mpt2sas_raid_template);
-		sas_release_transport(mpt2sas_transport_template);
-	}
-
-	return error;
-}
-
-/**
- * _scsih_exit - exit point for this driver (when it is a module).
- *
- * Returns 0 success, anything else error.
- */
-static void __exit
-_scsih_exit(void)
-{
-	printk(KERN_INFO "mpt2sas version %s unloading\n",
-	    MPT2SAS_DRIVER_VERSION);
-
-	pci_unregister_driver(&scsih_driver);
-
-	mpt2sas_ctl_exit();
-
-	mpt2sas_base_release_callback_handler(scsi_io_cb_idx);
-	mpt2sas_base_release_callback_handler(tm_cb_idx);
-	mpt2sas_base_release_callback_handler(base_cb_idx);
-	mpt2sas_base_release_callback_handler(port_enable_cb_idx);
-	mpt2sas_base_release_callback_handler(transport_cb_idx);
-	mpt2sas_base_release_callback_handler(scsih_cb_idx);
-	mpt2sas_base_release_callback_handler(config_cb_idx);
-	mpt2sas_base_release_callback_handler(ctl_cb_idx);
-
-	mpt2sas_base_release_callback_handler(tm_tr_cb_idx);
-	mpt2sas_base_release_callback_handler(tm_tr_volume_cb_idx);
-	mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx);
-
-	/* raid transport support */
-	raid_class_release(mpt2sas_raid_template);
-	sas_release_transport(mpt2sas_transport_template);
-
-}
-
-module_init(_scsih_init);
-module_exit(_scsih_exit);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
deleted file mode 100644
index af8680093..000000000
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ /dev/null
@@ -1,2173 +0,0 @@
-/*
- * SAS Transport Layer for MPT (Message Passing Technology) based controllers
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_transport.c
- * Copyright (C) 2007-2014  LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
- * USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_transport_sas.h>
-#include <scsi/scsi_dbg.h>
-
-#include "mpt2sas_base.h"
-/**
- * _transport_sas_node_find_by_sas_address - sas node search
- * @ioc: per adapter object
- * @sas_address: sas address of expander or sas host
- * Context: Calling function should acquire ioc->sas_node_lock.
- *
- * Search for either hba phys or expander device based on handle, then returns
- * the sas_node object.
- */
-static struct _sas_node *
-_transport_sas_node_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
-    u64 sas_address)
-{
-	if (ioc->sas_hba.sas_address == sas_address)
-		return &ioc->sas_hba;
-	else
-		return mpt2sas_scsih_expander_find_by_sas_address(ioc,
-		    sas_address);
-}
-
-/**
- * _transport_convert_phy_link_rate -
- * @link_rate: link rate returned from mpt firmware
- *
- * Convert link_rate from mpi fusion into sas_transport form.
- */
-static enum sas_linkrate
-_transport_convert_phy_link_rate(u8 link_rate)
-{
-	enum sas_linkrate rc;
-
-	switch (link_rate) {
-	case MPI2_SAS_NEG_LINK_RATE_1_5:
-		rc = SAS_LINK_RATE_1_5_GBPS;
-		break;
-	case MPI2_SAS_NEG_LINK_RATE_3_0:
-		rc = SAS_LINK_RATE_3_0_GBPS;
-		break;
-	case MPI2_SAS_NEG_LINK_RATE_6_0:
-		rc = SAS_LINK_RATE_6_0_GBPS;
-		break;
-	case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED:
-		rc = SAS_PHY_DISABLED;
-		break;
-	case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED:
-		rc = SAS_LINK_RATE_FAILED;
-		break;
-	case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR:
-		rc = SAS_SATA_PORT_SELECTOR;
-		break;
-	case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS:
-		rc = SAS_PHY_RESET_IN_PROGRESS;
-		break;
-	default:
-	case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE:
-	case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE:
-		rc = SAS_LINK_RATE_UNKNOWN;
-		break;
-	}
-	return rc;
-}
-
-/**
- * _transport_set_identify - set identify for phys and end devices
- * @ioc: per adapter object
- * @handle: device handle
- * @identify: sas identify info
- *
- * Populates sas identify info.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_set_identify(struct MPT2SAS_ADAPTER *ioc, u16 handle,
-    struct sas_identify *identify)
-{
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	Mpi2ConfigReply_t mpi_reply;
-	u32 device_info;
-	u32 ioc_status;
-
-	if (ioc->shost_recovery || ioc->pci_error_recovery) {
-		printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
-		    __func__, ioc->name);
-		return -EFAULT;
-	}
-
-	if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
-	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -ENXIO;
-	}
-
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)"
-		    "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
-		     __FILE__, __LINE__, __func__);
-		return -EIO;
-	}
-
-	memset(identify, 0, sizeof(struct sas_identify));
-	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
-
-	/* sas_address */
-	identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
-
-	/* phy number of the parent device this device is linked to */
-	identify->phy_identifier = sas_device_pg0.PhyNum;
-
-	/* device_type */
-	switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) {
-	case MPI2_SAS_DEVICE_INFO_NO_DEVICE:
-		identify->device_type = SAS_PHY_UNUSED;
-		break;
-	case MPI2_SAS_DEVICE_INFO_END_DEVICE:
-		identify->device_type = SAS_END_DEVICE;
-		break;
-	case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER:
-		identify->device_type = SAS_EDGE_EXPANDER_DEVICE;
-		break;
-	case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER:
-		identify->device_type = SAS_FANOUT_EXPANDER_DEVICE;
-		break;
-	}
-
-	/* initiator_port_protocols */
-	if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR)
-		identify->initiator_port_protocols |= SAS_PROTOCOL_SSP;
-	if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR)
-		identify->initiator_port_protocols |= SAS_PROTOCOL_STP;
-	if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR)
-		identify->initiator_port_protocols |= SAS_PROTOCOL_SMP;
-	if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST)
-		identify->initiator_port_protocols |= SAS_PROTOCOL_SATA;
-
-	/* target_port_protocols */
-	if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET)
-		identify->target_port_protocols |= SAS_PROTOCOL_SSP;
-	if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
-		identify->target_port_protocols |= SAS_PROTOCOL_STP;
-	if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET)
-		identify->target_port_protocols |= SAS_PROTOCOL_SMP;
-	if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
-		identify->target_port_protocols |= SAS_PROTOCOL_SATA;
-
-	return 0;
-}
-
-/**
- * mpt2sas_transport_done -  internal transport layer callback handler.
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Callback handler when sending internal generated transport cmds.
- * The callback index passed is `ioc->transport_cb_idx`
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-u8
-mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-    u32 reply)
-{
-	MPI2DefaultReply_t *mpi_reply;
-
-	mpi_reply =  mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (ioc->transport_cmds.status == MPT2_CMD_NOT_USED)
-		return 1;
-	if (ioc->transport_cmds.smid != smid)
-		return 1;
-	ioc->transport_cmds.status |= MPT2_CMD_COMPLETE;
-	if (mpi_reply) {
-		memcpy(ioc->transport_cmds.reply, mpi_reply,
-		    mpi_reply->MsgLength*4);
-		ioc->transport_cmds.status |= MPT2_CMD_REPLY_VALID;
-	}
-	ioc->transport_cmds.status &= ~MPT2_CMD_PENDING;
-	complete(&ioc->transport_cmds.done);
-	return 1;
-}
-
-/* report manufacture request structure */
-struct rep_manu_request{
-	u8 smp_frame_type;
-	u8 function;
-	u8 reserved;
-	u8 request_length;
-};
-
-/* report manufacture reply structure */
-struct rep_manu_reply{
-	u8 smp_frame_type; /* 0x41 */
-	u8 function; /* 0x01 */
-	u8 function_result;
-	u8 response_length;
-	u16 expander_change_count;
-	u8 reserved0[2];
-	u8 sas_format;
-	u8 reserved2[3];
-	u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN];
-	u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN];
-	u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN];
-	u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN];
-	u16 component_id;
-	u8 component_revision_id;
-	u8 reserved3;
-	u8 vendor_specific[8];
-};
-
-/**
- * _transport_expander_report_manufacture - obtain SMP report_manufacture
- * @ioc: per adapter object
- * @sas_address: expander sas address
- * @edev: the sas_expander_device object
- *
- * Fills in the sas_expander_device object when SMP port is created.
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
-    u64 sas_address, struct sas_expander_device *edev)
-{
-	Mpi2SmpPassthroughRequest_t *mpi_request;
-	Mpi2SmpPassthroughReply_t *mpi_reply;
-	struct rep_manu_reply *manufacture_reply;
-	struct rep_manu_request *manufacture_request;
-	int rc;
-	u16 smid;
-	u32 ioc_state;
-	unsigned long timeleft;
-	void *psge;
-	u32 sgl_flags;
-	u8 issue_reset = 0;
-	void *data_out = NULL;
-	dma_addr_t data_out_dma;
-	u32 sz;
-	u16 wait_state_count;
-
-	if (ioc->shost_recovery || ioc->pci_error_recovery) {
-		printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
-		    __func__, ioc->name);
-		return -EFAULT;
-	}
-
-	mutex_lock(&ioc->transport_cmds.mutex);
-
-	if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-	ioc->transport_cmds.status = MPT2_CMD_PENDING;
-
-	wait_state_count = 0;
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			printk(MPT2SAS_ERR_FMT
-			    "%s: failed due to ioc not operational\n",
-			    ioc->name, __func__);
-			rc = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-		printk(MPT2SAS_INFO_FMT "%s: waiting for "
-		    "operational state(count=%d)\n", ioc->name,
-		    __func__, wait_state_count);
-	}
-	if (wait_state_count)
-		printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
-		    ioc->name, __func__);
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	rc = 0;
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->transport_cmds.smid = smid;
-
-	sz = sizeof(struct rep_manu_request) + sizeof(struct rep_manu_reply);
-	data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma);
-
-	if (!data_out) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
-		    __LINE__, __func__);
-		rc = -ENOMEM;
-		mpt2sas_base_free_smid(ioc, smid);
-		goto out;
-	}
-
-	manufacture_request = data_out;
-	manufacture_request->smp_frame_type = 0x40;
-	manufacture_request->function = 1;
-	manufacture_request->reserved = 0;
-	manufacture_request->request_length = 0;
-
-	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
-	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
-	mpi_request->PhysicalPort = 0xFF;
-	mpi_request->VF_ID = 0; /* TODO */
-	mpi_request->VP_ID = 0;
-	mpi_request->SASAddress = cpu_to_le64(sas_address);
-	mpi_request->RequestDataLength =
-	    cpu_to_le16(sizeof(struct rep_manu_request));
-	psge = &mpi_request->SGL;
-
-	/* WRITE sgel first */
-	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
-	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-	ioc->base_add_sg_single(psge, sgl_flags |
-	    sizeof(struct rep_manu_request), data_out_dma);
-
-	/* incr sgel */
-	psge += ioc->sge_size;
-
-	/* READ sgel last */
-	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-	    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
-	    MPI2_SGE_FLAGS_END_OF_LIST);
-	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-	ioc->base_add_sg_single(psge, sgl_flags |
-	    sizeof(struct rep_manu_reply), data_out_dma +
-	    sizeof(struct rep_manu_request));
-
-	dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "report_manufacture - "
-	    "send to sas_addr(0x%016llx)\n", ioc->name,
-	    (unsigned long long)sas_address));
-	init_completion(&ioc->transport_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
-	    10*HZ);
-
-	if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
-		    ioc->name, __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
-		if (!(ioc->transport_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
-		goto issue_host_reset;
-	}
-
-	dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "report_manufacture - "
-	    "complete\n", ioc->name));
-
-	if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) {
-		u8 *tmp;
-
-		mpi_reply = ioc->transport_cmds.reply;
-
-		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "report_manufacture - reply data transfer size(%d)\n",
-		    ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength)));
-
-		if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
-		    sizeof(struct rep_manu_reply))
-			goto out;
-
-		manufacture_reply = data_out + sizeof(struct rep_manu_request);
-		strncpy(edev->vendor_id, manufacture_reply->vendor_id,
-		     SAS_EXPANDER_VENDOR_ID_LEN);
-		strncpy(edev->product_id, manufacture_reply->product_id,
-		     SAS_EXPANDER_PRODUCT_ID_LEN);
-		strncpy(edev->product_rev, manufacture_reply->product_rev,
-		     SAS_EXPANDER_PRODUCT_REV_LEN);
-		edev->level = manufacture_reply->sas_format & 1;
-		if (edev->level) {
-			strncpy(edev->component_vendor_id,
-			    manufacture_reply->component_vendor_id,
-			     SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
-			tmp = (u8 *)&manufacture_reply->component_id;
-			edev->component_id = tmp[0] << 8 | tmp[1];
-			edev->component_revision_id =
-			    manufacture_reply->component_revision_id;
-		}
-	} else
-		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "report_manufacture - no reply\n", ioc->name));
-
- issue_host_reset:
-	if (issue_reset)
-		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
- out:
-	ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
-	if (data_out)
-		pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma);
-
-	mutex_unlock(&ioc->transport_cmds.mutex);
-	return rc;
-}
-
-/**
- * _transport_delete_port - helper function to removing a port
- * @ioc: per adapter object
- * @mpt2sas_port: mpt2sas per port object
- *
- * Returns nothing.
- */
-static void
-_transport_delete_port(struct MPT2SAS_ADAPTER *ioc,
-	struct _sas_port *mpt2sas_port)
-{
-	u64 sas_address = mpt2sas_port->remote_identify.sas_address;
-	enum sas_device_type device_type =
-	    mpt2sas_port->remote_identify.device_type;
-
-	dev_printk(KERN_INFO, &mpt2sas_port->port->dev,
-	    "remove: sas_addr(0x%016llx)\n",
-	    (unsigned long long) sas_address);
-
-	ioc->logging_level |= MPT_DEBUG_TRANSPORT;
-	if (device_type == SAS_END_DEVICE)
-		mpt2sas_device_remove_by_sas_address(ioc, sas_address);
-	else if (device_type == SAS_EDGE_EXPANDER_DEVICE ||
-	    device_type == SAS_FANOUT_EXPANDER_DEVICE)
-		mpt2sas_expander_remove(ioc, sas_address);
-	ioc->logging_level &= ~MPT_DEBUG_TRANSPORT;
-}
-
-/**
- * _transport_delete_phy - helper function to removing single phy from port
- * @ioc: per adapter object
- * @mpt2sas_port: mpt2sas per port object
- * @mpt2sas_phy: mpt2sas per phy object
- *
- * Returns nothing.
- */
-static void
-_transport_delete_phy(struct MPT2SAS_ADAPTER *ioc,
-	struct _sas_port *mpt2sas_port, struct _sas_phy *mpt2sas_phy)
-{
-	u64 sas_address = mpt2sas_port->remote_identify.sas_address;
-
-	dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev,
-	    "remove: sas_addr(0x%016llx), phy(%d)\n",
-	    (unsigned long long) sas_address, mpt2sas_phy->phy_id);
-
-	list_del(&mpt2sas_phy->port_siblings);
-	mpt2sas_port->num_phys--;
-	sas_port_delete_phy(mpt2sas_port->port, mpt2sas_phy->phy);
-	mpt2sas_phy->phy_belongs_to_port = 0;
-}
-
-/**
- * _transport_add_phy - helper function to adding single phy to port
- * @ioc: per adapter object
- * @mpt2sas_port: mpt2sas per port object
- * @mpt2sas_phy: mpt2sas per phy object
- *
- * Returns nothing.
- */
-static void
-_transport_add_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_port *mpt2sas_port,
-	struct _sas_phy *mpt2sas_phy)
-{
-	u64 sas_address = mpt2sas_port->remote_identify.sas_address;
-
-	dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev,
-	    "add: sas_addr(0x%016llx), phy(%d)\n", (unsigned long long)
-	    sas_address, mpt2sas_phy->phy_id);
-
-	list_add_tail(&mpt2sas_phy->port_siblings, &mpt2sas_port->phy_list);
-	mpt2sas_port->num_phys++;
-	sas_port_add_phy(mpt2sas_port->port, mpt2sas_phy->phy);
-	mpt2sas_phy->phy_belongs_to_port = 1;
-}
-
-/**
- * _transport_add_phy_to_an_existing_port - adding new phy to existing port
- * @ioc: per adapter object
- * @sas_node: sas node object (either expander or sas host)
- * @mpt2sas_phy: mpt2sas per phy object
- * @sas_address: sas address of device/expander were phy needs to be added to
- *
- * Returns nothing.
- */
-static void
-_transport_add_phy_to_an_existing_port(struct MPT2SAS_ADAPTER *ioc,
-struct _sas_node *sas_node, struct _sas_phy *mpt2sas_phy, u64 sas_address)
-{
-	struct _sas_port *mpt2sas_port;
-	struct _sas_phy *phy_srch;
-
-	if (mpt2sas_phy->phy_belongs_to_port == 1)
-		return;
-
-	list_for_each_entry(mpt2sas_port, &sas_node->sas_port_list,
-	    port_list) {
-		if (mpt2sas_port->remote_identify.sas_address !=
-		    sas_address)
-			continue;
-		list_for_each_entry(phy_srch, &mpt2sas_port->phy_list,
-		    port_siblings) {
-			if (phy_srch == mpt2sas_phy)
-				return;
-		}
-		_transport_add_phy(ioc, mpt2sas_port, mpt2sas_phy);
-			return;
-	}
-
-}
-
-/**
- * _transport_del_phy_from_an_existing_port - delete phy from existing port
- * @ioc: per adapter object
- * @sas_node: sas node object (either expander or sas host)
- * @mpt2sas_phy: mpt2sas per phy object
- *
- * Returns nothing.
- */
-static void
-_transport_del_phy_from_an_existing_port(struct MPT2SAS_ADAPTER *ioc,
-	struct _sas_node *sas_node, struct _sas_phy *mpt2sas_phy)
-{
-	struct _sas_port *mpt2sas_port, *next;
-	struct _sas_phy *phy_srch;
-
-	if (mpt2sas_phy->phy_belongs_to_port == 0)
-		return;
-
-	list_for_each_entry_safe(mpt2sas_port, next, &sas_node->sas_port_list,
-	    port_list) {
-		list_for_each_entry(phy_srch, &mpt2sas_port->phy_list,
-		    port_siblings) {
-			if (phy_srch != mpt2sas_phy)
-				continue;
-			if (mpt2sas_port->num_phys == 1)
-				_transport_delete_port(ioc, mpt2sas_port);
-			else
-				_transport_delete_phy(ioc, mpt2sas_port,
-				    mpt2sas_phy);
-			return;
-		}
-	}
-}
-
-/**
- * _transport_sanity_check - sanity check when adding a new port
- * @ioc: per adapter object
- * @sas_node: sas node object (either expander or sas host)
- * @sas_address: sas address of device being added
- *
- * See the explanation above from _transport_delete_duplicate_port
- */
-static void
-_transport_sanity_check(struct MPT2SAS_ADAPTER *ioc, struct _sas_node *sas_node,
-     u64 sas_address)
-{
-	int i;
-
-	for (i = 0; i < sas_node->num_phys; i++) {
-		if (sas_node->phy[i].remote_identify.sas_address != sas_address)
-			continue;
-		if (sas_node->phy[i].phy_belongs_to_port == 1)
-			_transport_del_phy_from_an_existing_port(ioc, sas_node,
-			    &sas_node->phy[i]);
-	}
-}
-
-/**
- * mpt2sas_transport_port_add - insert port to the list
- * @ioc: per adapter object
- * @handle: handle of attached device
- * @sas_address: sas address of parent expander or sas host
- * Context: This function will acquire ioc->sas_node_lock.
- *
- * Adding new port object to the sas_node->sas_port_list.
- *
- * Returns mpt2sas_port.
- */
-struct _sas_port *
-mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle,
-    u64 sas_address)
-{
-	struct _sas_phy *mpt2sas_phy, *next;
-	struct _sas_port *mpt2sas_port;
-	unsigned long flags;
-	struct _sas_node *sas_node;
-	struct sas_rphy *rphy;
-	int i;
-	struct sas_port *port;
-
-	mpt2sas_port = kzalloc(sizeof(struct _sas_port),
-	    GFP_KERNEL);
-	if (!mpt2sas_port) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return NULL;
-	}
-
-	INIT_LIST_HEAD(&mpt2sas_port->port_list);
-	INIT_LIST_HEAD(&mpt2sas_port->phy_list);
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address);
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
-	if (!sas_node) {
-		printk(MPT2SAS_ERR_FMT "%s: Could not find "
-		    "parent sas_address(0x%016llx)!\n", ioc->name,
-		    __func__, (unsigned long long)sas_address);
-		goto out_fail;
-	}
-
-	if ((_transport_set_identify(ioc, handle,
-	    &mpt2sas_port->remote_identify))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out_fail;
-	}
-
-	if (mpt2sas_port->remote_identify.device_type == SAS_PHY_UNUSED) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out_fail;
-	}
-
-	_transport_sanity_check(ioc, sas_node,
-	    mpt2sas_port->remote_identify.sas_address);
-
-	for (i = 0; i < sas_node->num_phys; i++) {
-		if (sas_node->phy[i].remote_identify.sas_address !=
-		    mpt2sas_port->remote_identify.sas_address)
-			continue;
-		list_add_tail(&sas_node->phy[i].port_siblings,
-		    &mpt2sas_port->phy_list);
-		mpt2sas_port->num_phys++;
-	}
-
-	if (!mpt2sas_port->num_phys) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out_fail;
-	}
-
-	port = sas_port_alloc_num(sas_node->parent_dev);
-	if ((sas_port_add(port))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		goto out_fail;
-	}
-
-	list_for_each_entry(mpt2sas_phy, &mpt2sas_port->phy_list,
-	    port_siblings) {
-		if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
-			dev_printk(KERN_INFO, &port->dev, "add: handle(0x%04x)"
-			    ", sas_addr(0x%016llx), phy(%d)\n", handle,
-			    (unsigned long long)
-			    mpt2sas_port->remote_identify.sas_address,
-			    mpt2sas_phy->phy_id);
-		sas_port_add_phy(port, mpt2sas_phy->phy);
-		mpt2sas_phy->phy_belongs_to_port = 1;
-	}
-
-	mpt2sas_port->port = port;
-	if (mpt2sas_port->remote_identify.device_type == SAS_END_DEVICE)
-		rphy = sas_end_device_alloc(port);
-	else
-		rphy = sas_expander_alloc(port,
-		    mpt2sas_port->remote_identify.device_type);
-
-	rphy->identify = mpt2sas_port->remote_identify;
-	if ((sas_rphy_add(rphy))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-	}
-	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
-		dev_printk(KERN_INFO, &rphy->dev, "add: handle(0x%04x), "
-		    "sas_addr(0x%016llx)\n", handle,
-		    (unsigned long long)
-		    mpt2sas_port->remote_identify.sas_address);
-	mpt2sas_port->rphy = rphy;
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	list_add_tail(&mpt2sas_port->port_list, &sas_node->sas_port_list);
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
-	/* fill in report manufacture */
-	if (mpt2sas_port->remote_identify.device_type ==
-	    MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
-	    mpt2sas_port->remote_identify.device_type ==
-	    MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
-		_transport_expander_report_manufacture(ioc,
-		    mpt2sas_port->remote_identify.sas_address,
-		    rphy_to_expander_device(rphy));
-
-	return mpt2sas_port;
-
- out_fail:
-	list_for_each_entry_safe(mpt2sas_phy, next, &mpt2sas_port->phy_list,
-	    port_siblings)
-		list_del(&mpt2sas_phy->port_siblings);
-	kfree(mpt2sas_port);
-	return NULL;
-}
-
-/**
- * mpt2sas_transport_port_remove - remove port from the list
- * @ioc: per adapter object
- * @sas_address: sas address of attached device
- * @sas_address_parent: sas address of parent expander or sas host
- * Context: This function will acquire ioc->sas_node_lock.
- *
- * Removing object and freeing associated memory from the
- * ioc->sas_port_list.
- *
- * Return nothing.
- */
-void
-mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
-    u64 sas_address_parent)
-{
-	int i;
-	unsigned long flags;
-	struct _sas_port *mpt2sas_port, *next;
-	struct _sas_node *sas_node;
-	u8 found = 0;
-	struct _sas_phy *mpt2sas_phy, *next_phy;
-
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	sas_node = _transport_sas_node_find_by_sas_address(ioc,
-	    sas_address_parent);
-	if (!sas_node) {
-		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-		return;
-	}
-	list_for_each_entry_safe(mpt2sas_port, next, &sas_node->sas_port_list,
-	    port_list) {
-		if (mpt2sas_port->remote_identify.sas_address != sas_address)
-			continue;
-		found = 1;
-		list_del(&mpt2sas_port->port_list);
-		goto out;
-	}
- out:
-	if (!found) {
-		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-		return;
-	}
-
-	for (i = 0; i < sas_node->num_phys; i++) {
-		if (sas_node->phy[i].remote_identify.sas_address == sas_address)
-			memset(&sas_node->phy[i].remote_identify, 0 ,
-			    sizeof(struct sas_identify));
-	}
-
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-	list_for_each_entry_safe(mpt2sas_phy, next_phy,
-	    &mpt2sas_port->phy_list, port_siblings) {
-		if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
-			dev_printk(KERN_INFO, &mpt2sas_port->port->dev,
-			    "remove: sas_addr(0x%016llx), phy(%d)\n",
-			    (unsigned long long)
-			    mpt2sas_port->remote_identify.sas_address,
-			    mpt2sas_phy->phy_id);
-		mpt2sas_phy->phy_belongs_to_port = 0;
-		sas_port_delete_phy(mpt2sas_port->port, mpt2sas_phy->phy);
-		list_del(&mpt2sas_phy->port_siblings);
-	}
-	sas_port_delete(mpt2sas_port->port);
-	kfree(mpt2sas_port);
-}
-
-/**
- * mpt2sas_transport_add_host_phy - report sas_host phy to transport
- * @ioc: per adapter object
- * @mpt2sas_phy: mpt2sas per phy object
- * @phy_pg0: sas phy page 0
- * @parent_dev: parent device class object
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
-    *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev)
-{
-	struct sas_phy *phy;
-	int phy_index = mpt2sas_phy->phy_id;
-
-
-	INIT_LIST_HEAD(&mpt2sas_phy->port_siblings);
-	phy = sas_phy_alloc(parent_dev, phy_index);
-	if (!phy) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-	if ((_transport_set_identify(ioc, mpt2sas_phy->handle,
-	    &mpt2sas_phy->identify))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-	phy->identify = mpt2sas_phy->identify;
-	mpt2sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle);
-	if (mpt2sas_phy->attached_handle)
-		_transport_set_identify(ioc, mpt2sas_phy->attached_handle,
-		    &mpt2sas_phy->remote_identify);
-	phy->identify.phy_identifier = mpt2sas_phy->phy_id;
-	phy->negotiated_linkrate = _transport_convert_phy_link_rate(
-	    phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
-	phy->minimum_linkrate_hw = _transport_convert_phy_link_rate(
-	    phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK);
-	phy->maximum_linkrate_hw = _transport_convert_phy_link_rate(
-	    phy_pg0.HwLinkRate >> 4);
-	phy->minimum_linkrate = _transport_convert_phy_link_rate(
-	    phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
-	phy->maximum_linkrate = _transport_convert_phy_link_rate(
-	    phy_pg0.ProgrammedLinkRate >> 4);
-
-	if ((sas_phy_add(phy))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		sas_phy_free(phy);
-		return -1;
-	}
-	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
-		dev_printk(KERN_INFO, &phy->dev,
-		    "add: handle(0x%04x), sas_addr(0x%016llx)\n"
-		    "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
-		    mpt2sas_phy->handle, (unsigned long long)
-		    mpt2sas_phy->identify.sas_address,
-		    mpt2sas_phy->attached_handle,
-		    (unsigned long long)
-		    mpt2sas_phy->remote_identify.sas_address);
-	mpt2sas_phy->phy = phy;
-	return 0;
-}
-
-
-/**
- * mpt2sas_transport_add_expander_phy - report expander phy to transport
- * @ioc: per adapter object
- * @mpt2sas_phy: mpt2sas per phy object
- * @expander_pg1: expander page 1
- * @parent_dev: parent device class object
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
-    *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev)
-{
-	struct sas_phy *phy;
-	int phy_index = mpt2sas_phy->phy_id;
-
-	INIT_LIST_HEAD(&mpt2sas_phy->port_siblings);
-	phy = sas_phy_alloc(parent_dev, phy_index);
-	if (!phy) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-	if ((_transport_set_identify(ioc, mpt2sas_phy->handle,
-	    &mpt2sas_phy->identify))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -1;
-	}
-	phy->identify = mpt2sas_phy->identify;
-	mpt2sas_phy->attached_handle =
-	    le16_to_cpu(expander_pg1.AttachedDevHandle);
-	if (mpt2sas_phy->attached_handle)
-		_transport_set_identify(ioc, mpt2sas_phy->attached_handle,
-		    &mpt2sas_phy->remote_identify);
-	phy->identify.phy_identifier = mpt2sas_phy->phy_id;
-	phy->negotiated_linkrate = _transport_convert_phy_link_rate(
-	    expander_pg1.NegotiatedLinkRate &
-	    MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
-	phy->minimum_linkrate_hw = _transport_convert_phy_link_rate(
-	    expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK);
-	phy->maximum_linkrate_hw = _transport_convert_phy_link_rate(
-	    expander_pg1.HwLinkRate >> 4);
-	phy->minimum_linkrate = _transport_convert_phy_link_rate(
-	    expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
-	phy->maximum_linkrate = _transport_convert_phy_link_rate(
-	    expander_pg1.ProgrammedLinkRate >> 4);
-
-	if ((sas_phy_add(phy))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		sas_phy_free(phy);
-		return -1;
-	}
-	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
-		dev_printk(KERN_INFO, &phy->dev,
-		    "add: handle(0x%04x), sas_addr(0x%016llx)\n"
-		    "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
-		    mpt2sas_phy->handle, (unsigned long long)
-		    mpt2sas_phy->identify.sas_address,
-		    mpt2sas_phy->attached_handle,
-		    (unsigned long long)
-		    mpt2sas_phy->remote_identify.sas_address);
-	mpt2sas_phy->phy = phy;
-	return 0;
-}
-
-/**
- * mpt2sas_transport_update_links - refreshing phy link changes
- * @ioc: per adapter object
- * @sas_address: sas address of parent expander or sas host
- * @handle: attached device handle
- * @phy_numberv: phy number
- * @link_rate: new link rate
- *
- * Returns nothing.
- */
-void
-mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc,
-     u64 sas_address, u16 handle, u8 phy_number, u8 link_rate)
-{
-	unsigned long flags;
-	struct _sas_node *sas_node;
-	struct _sas_phy *mpt2sas_phy;
-
-	if (ioc->shost_recovery || ioc->pci_error_recovery)
-		return;
-
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address);
-	if (!sas_node) {
-		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-		return;
-	}
-
-	mpt2sas_phy = &sas_node->phy[phy_number];
-	mpt2sas_phy->attached_handle = handle;
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-	if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) {
-		_transport_set_identify(ioc, handle,
-		    &mpt2sas_phy->remote_identify);
-		_transport_add_phy_to_an_existing_port(ioc, sas_node,
-		    mpt2sas_phy, mpt2sas_phy->remote_identify.sas_address);
-	} else
-		memset(&mpt2sas_phy->remote_identify, 0 , sizeof(struct
-		    sas_identify));
-
-	if (mpt2sas_phy->phy)
-		mpt2sas_phy->phy->negotiated_linkrate =
-		    _transport_convert_phy_link_rate(link_rate);
-
-	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
-		dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev,
-		    "refresh: parent sas_addr(0x%016llx),\n"
-		    "\tlink_rate(0x%02x), phy(%d)\n"
-		    "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
-		    (unsigned long long)sas_address,
-		    link_rate, phy_number, handle, (unsigned long long)
-		    mpt2sas_phy->remote_identify.sas_address);
-}
-
-static inline void *
-phy_to_ioc(struct sas_phy *phy)
-{
-	struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
-	return shost_priv(shost);
-}
-
-static inline void *
-rphy_to_ioc(struct sas_rphy *rphy)
-{
-	struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
-	return shost_priv(shost);
-}
-
-
-/* report phy error log structure */
-struct phy_error_log_request{
-	u8 smp_frame_type; /* 0x40 */
-	u8 function; /* 0x11 */
-	u8 allocated_response_length;
-	u8 request_length; /* 02 */
-	u8 reserved_1[5];
-	u8 phy_identifier;
-	u8 reserved_2[2];
-};
-
-/* report phy error log reply structure */
-struct phy_error_log_reply{
-	u8 smp_frame_type; /* 0x41 */
-	u8 function; /* 0x11 */
-	u8 function_result;
-	u8 response_length;
-	__be16 expander_change_count;
-	u8 reserved_1[3];
-	u8 phy_identifier;
-	u8 reserved_2[2];
-	__be32 invalid_dword;
-	__be32 running_disparity_error;
-	__be32 loss_of_dword_sync;
-	__be32 phy_reset_problem;
-};
-
-/**
- * _transport_get_expander_phy_error_log - return expander counters
- * @ioc: per adapter object
- * @phy: The sas phy object
- *
- * Returns 0 for success, non-zero for failure.
- *
- */
-static int
-_transport_get_expander_phy_error_log(struct MPT2SAS_ADAPTER *ioc,
-    struct sas_phy *phy)
-{
-	Mpi2SmpPassthroughRequest_t *mpi_request;
-	Mpi2SmpPassthroughReply_t *mpi_reply;
-	struct phy_error_log_request *phy_error_log_request;
-	struct phy_error_log_reply *phy_error_log_reply;
-	int rc;
-	u16 smid;
-	u32 ioc_state;
-	unsigned long timeleft;
-	void *psge;
-	u32 sgl_flags;
-	u8 issue_reset = 0;
-	void *data_out = NULL;
-	dma_addr_t data_out_dma;
-	u32 sz;
-	u16 wait_state_count;
-
-	if (ioc->shost_recovery || ioc->pci_error_recovery) {
-		printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
-		    __func__, ioc->name);
-		return -EFAULT;
-	}
-
-	mutex_lock(&ioc->transport_cmds.mutex);
-
-	if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-	ioc->transport_cmds.status = MPT2_CMD_PENDING;
-
-	wait_state_count = 0;
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			printk(MPT2SAS_ERR_FMT
-			    "%s: failed due to ioc not operational\n",
-			    ioc->name, __func__);
-			rc = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-		printk(MPT2SAS_INFO_FMT "%s: waiting for "
-		    "operational state(count=%d)\n", ioc->name,
-		    __func__, wait_state_count);
-	}
-	if (wait_state_count)
-		printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
-		    ioc->name, __func__);
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->transport_cmds.smid = smid;
-
-	sz = sizeof(struct phy_error_log_request) +
-	    sizeof(struct phy_error_log_reply);
-	data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma);
-	if (!data_out) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
-		    __LINE__, __func__);
-		rc = -ENOMEM;
-		mpt2sas_base_free_smid(ioc, smid);
-		goto out;
-	}
-
-	rc = -EINVAL;
-	memset(data_out, 0, sz);
-	phy_error_log_request = data_out;
-	phy_error_log_request->smp_frame_type = 0x40;
-	phy_error_log_request->function = 0x11;
-	phy_error_log_request->request_length = 2;
-	phy_error_log_request->allocated_response_length = 0;
-	phy_error_log_request->phy_identifier = phy->number;
-
-	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
-	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
-	mpi_request->PhysicalPort = 0xFF;
-	mpi_request->VF_ID = 0; /* TODO */
-	mpi_request->VP_ID = 0;
-	mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
-	mpi_request->RequestDataLength =
-	    cpu_to_le16(sizeof(struct phy_error_log_request));
-	psge = &mpi_request->SGL;
-
-	/* WRITE sgel first */
-	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
-	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-	ioc->base_add_sg_single(psge, sgl_flags |
-	    sizeof(struct phy_error_log_request), data_out_dma);
-
-	/* incr sgel */
-	psge += ioc->sge_size;
-
-	/* READ sgel last */
-	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-	    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
-	    MPI2_SGE_FLAGS_END_OF_LIST);
-	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-	ioc->base_add_sg_single(psge, sgl_flags |
-	    sizeof(struct phy_error_log_reply), data_out_dma +
-	    sizeof(struct phy_error_log_request));
-
-	dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "phy_error_log - "
-	    "send to sas_addr(0x%016llx), phy(%d)\n", ioc->name,
-	    (unsigned long long)phy->identify.sas_address, phy->number));
-	init_completion(&ioc->transport_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
-	    10*HZ);
-
-	if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
-		    ioc->name, __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
-		if (!(ioc->transport_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
-		goto issue_host_reset;
-	}
-
-	dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "phy_error_log - "
-	    "complete\n", ioc->name));
-
-	if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) {
-
-		mpi_reply = ioc->transport_cmds.reply;
-
-		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "phy_error_log - reply data transfer size(%d)\n",
-		    ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength)));
-
-		if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
-		    sizeof(struct phy_error_log_reply))
-			goto out;
-
-		phy_error_log_reply = data_out +
-		    sizeof(struct phy_error_log_request);
-
-		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "phy_error_log - function_result(%d)\n",
-		    ioc->name, phy_error_log_reply->function_result));
-
-		phy->invalid_dword_count =
-		    be32_to_cpu(phy_error_log_reply->invalid_dword);
-		phy->running_disparity_error_count =
-		    be32_to_cpu(phy_error_log_reply->running_disparity_error);
-		phy->loss_of_dword_sync_count =
-		    be32_to_cpu(phy_error_log_reply->loss_of_dword_sync);
-		phy->phy_reset_problem_count =
-		    be32_to_cpu(phy_error_log_reply->phy_reset_problem);
-		rc = 0;
-	} else
-		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "phy_error_log - no reply\n", ioc->name));
-
- issue_host_reset:
-	if (issue_reset)
-		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
- out:
-	ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
-	if (data_out)
-		pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma);
-
-	mutex_unlock(&ioc->transport_cmds.mutex);
-	return rc;
-}
-
-/**
- * _transport_get_linkerrors - return phy counters for both hba and expanders
- * @phy: The sas phy object
- *
- * Returns 0 for success, non-zero for failure.
- *
- */
-static int
-_transport_get_linkerrors(struct sas_phy *phy)
-{
-	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
-	unsigned long flags;
-	Mpi2ConfigReply_t mpi_reply;
-	Mpi2SasPhyPage1_t phy_pg1;
-
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	if (_transport_sas_node_find_by_sas_address(ioc,
-	    phy->identify.sas_address) == NULL) {
-		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-		return -EINVAL;
-	}
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
-	if (phy->identify.sas_address != ioc->sas_hba.sas_address)
-		return _transport_get_expander_phy_error_log(ioc, phy);
-
-	/* get hba phy error logs */
-	if ((mpt2sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1,
-		    phy->number))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -ENXIO;
-	}
-
-	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo)
-		printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status"
-		    "(0x%04x), loginfo(0x%08x)\n", ioc->name,
-		    phy->number, le16_to_cpu(mpi_reply.IOCStatus),
-		    le32_to_cpu(mpi_reply.IOCLogInfo));
-
-	phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount);
-	phy->running_disparity_error_count =
-	    le32_to_cpu(phy_pg1.RunningDisparityErrorCount);
-	phy->loss_of_dword_sync_count =
-	    le32_to_cpu(phy_pg1.LossDwordSynchCount);
-	phy->phy_reset_problem_count =
-	    le32_to_cpu(phy_pg1.PhyResetProblemCount);
-	return 0;
-}
-
-/**
- * _transport_get_enclosure_identifier -
- * @phy: The sas phy object
- *
- * Obtain the enclosure logical id for an expander.
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
-{
-	struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
-	struct _sas_device *sas_device;
-	unsigned long flags;
-	int rc;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_by_addr(ioc,
-	    rphy->identify.sas_address);
-	if (sas_device) {
-		*identifier = sas_device->enclosure_logical_id;
-		rc = 0;
-		sas_device_put(sas_device);
-	} else {
-		*identifier = 0;
-		rc = -ENXIO;
-	}
-
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	return rc;
-}
-
-/**
- * _transport_get_bay_identifier -
- * @phy: The sas phy object
- *
- * Returns the slot id for a device that resides inside an enclosure.
- */
-static int
-_transport_get_bay_identifier(struct sas_rphy *rphy)
-{
-	struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
-	struct _sas_device *sas_device;
-	unsigned long flags;
-	int rc;
-
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = __mpt2sas_get_sdev_by_addr(ioc,
-	    rphy->identify.sas_address);
-	if (sas_device) {
-		rc = sas_device->slot;
-		sas_device_put(sas_device);
-	} else {
-		rc = -ENXIO;
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	return rc;
-}
-
-/* phy control request structure */
-struct phy_control_request{
-	u8 smp_frame_type; /* 0x40 */
-	u8 function; /* 0x91 */
-	u8 allocated_response_length;
-	u8 request_length; /* 0x09 */
-	u16 expander_change_count;
-	u8 reserved_1[3];
-	u8 phy_identifier;
-	u8 phy_operation;
-	u8 reserved_2[13];
-	u64 attached_device_name;
-	u8 programmed_min_physical_link_rate;
-	u8 programmed_max_physical_link_rate;
-	u8 reserved_3[6];
-};
-
-/* phy control reply structure */
-struct phy_control_reply{
-	u8 smp_frame_type; /* 0x41 */
-	u8 function; /* 0x11 */
-	u8 function_result;
-	u8 response_length;
-};
-
-#define SMP_PHY_CONTROL_LINK_RESET	(0x01)
-#define SMP_PHY_CONTROL_HARD_RESET	(0x02)
-#define SMP_PHY_CONTROL_DISABLE		(0x03)
-
-/**
- * _transport_expander_phy_control - expander phy control
- * @ioc: per adapter object
- * @phy: The sas phy object
- *
- * Returns 0 for success, non-zero for failure.
- *
- */
-static int
-_transport_expander_phy_control(struct MPT2SAS_ADAPTER *ioc,
-    struct sas_phy *phy, u8 phy_operation)
-{
-	Mpi2SmpPassthroughRequest_t *mpi_request;
-	Mpi2SmpPassthroughReply_t *mpi_reply;
-	struct phy_control_request *phy_control_request;
-	struct phy_control_reply *phy_control_reply;
-	int rc;
-	u16 smid;
-	u32 ioc_state;
-	unsigned long timeleft;
-	void *psge;
-	u32 sgl_flags;
-	u8 issue_reset = 0;
-	void *data_out = NULL;
-	dma_addr_t data_out_dma;
-	u32 sz;
-	u16 wait_state_count;
-
-	if (ioc->shost_recovery) {
-		printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
-		    __func__, ioc->name);
-		return -EFAULT;
-	}
-
-	mutex_lock(&ioc->transport_cmds.mutex);
-
-	if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-	ioc->transport_cmds.status = MPT2_CMD_PENDING;
-
-	wait_state_count = 0;
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			printk(MPT2SAS_ERR_FMT
-			    "%s: failed due to ioc not operational\n",
-			    ioc->name, __func__);
-			rc = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-		printk(MPT2SAS_INFO_FMT "%s: waiting for "
-		    "operational state(count=%d)\n", ioc->name,
-		    __func__, wait_state_count);
-	}
-	if (wait_state_count)
-		printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
-		    ioc->name, __func__);
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->transport_cmds.smid = smid;
-
-	sz = sizeof(struct phy_control_request) +
-	    sizeof(struct phy_control_reply);
-	data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma);
-	if (!data_out) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
-		    __LINE__, __func__);
-		rc = -ENOMEM;
-		mpt2sas_base_free_smid(ioc, smid);
-		goto out;
-	}
-
-	rc = -EINVAL;
-	memset(data_out, 0, sz);
-	phy_control_request = data_out;
-	phy_control_request->smp_frame_type = 0x40;
-	phy_control_request->function = 0x91;
-	phy_control_request->request_length = 9;
-	phy_control_request->allocated_response_length = 0;
-	phy_control_request->phy_identifier = phy->number;
-	phy_control_request->phy_operation = phy_operation;
-	phy_control_request->programmed_min_physical_link_rate =
-	    phy->minimum_linkrate << 4;
-	phy_control_request->programmed_max_physical_link_rate =
-	    phy->maximum_linkrate << 4;
-
-	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
-	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
-	mpi_request->PhysicalPort = 0xFF;
-	mpi_request->VF_ID = 0; /* TODO */
-	mpi_request->VP_ID = 0;
-	mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
-	mpi_request->RequestDataLength =
-	    cpu_to_le16(sizeof(struct phy_error_log_request));
-	psge = &mpi_request->SGL;
-
-	/* WRITE sgel first */
-	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
-	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-	ioc->base_add_sg_single(psge, sgl_flags |
-	    sizeof(struct phy_control_request), data_out_dma);
-
-	/* incr sgel */
-	psge += ioc->sge_size;
-
-	/* READ sgel last */
-	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-	    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
-	    MPI2_SGE_FLAGS_END_OF_LIST);
-	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-	ioc->base_add_sg_single(psge, sgl_flags |
-	    sizeof(struct phy_control_reply), data_out_dma +
-	    sizeof(struct phy_control_request));
-
-	dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "phy_control - "
-	    "send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n", ioc->name,
-	    (unsigned long long)phy->identify.sas_address, phy->number,
-	    phy_operation));
-
-	init_completion(&ioc->transport_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
-	    10*HZ);
-
-	if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
-		    ioc->name, __func__);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
-		if (!(ioc->transport_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
-		goto issue_host_reset;
-	}
-
-	dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "phy_control - "
-	    "complete\n", ioc->name));
-
-	if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) {
-
-		mpi_reply = ioc->transport_cmds.reply;
-
-		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "phy_control - reply data transfer size(%d)\n",
-		    ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength)));
-
-		if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
-		    sizeof(struct phy_control_reply))
-			goto out;
-
-		phy_control_reply = data_out +
-		    sizeof(struct phy_control_request);
-
-		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "phy_control - function_result(%d)\n",
-		    ioc->name, phy_control_reply->function_result));
-
-		rc = 0;
-	} else
-		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "phy_control - no reply\n", ioc->name));
-
- issue_host_reset:
-	if (issue_reset)
-		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
- out:
-	ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
-	if (data_out)
-		pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma);
-
-	mutex_unlock(&ioc->transport_cmds.mutex);
-	return rc;
-}
-
-/**
- * _transport_phy_reset -
- * @phy: The sas phy object
- * @hard_reset:
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_phy_reset(struct sas_phy *phy, int hard_reset)
-{
-	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
-	Mpi2SasIoUnitControlReply_t mpi_reply;
-	Mpi2SasIoUnitControlRequest_t mpi_request;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	if (_transport_sas_node_find_by_sas_address(ioc,
-	    phy->identify.sas_address) == NULL) {
-		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-		return -EINVAL;
-	}
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
-	/* handle expander phys */
-	if (phy->identify.sas_address != ioc->sas_hba.sas_address)
-		return _transport_expander_phy_control(ioc, phy,
-		    (hard_reset == 1) ? SMP_PHY_CONTROL_HARD_RESET :
-		    SMP_PHY_CONTROL_LINK_RESET);
-
-	/* handle hba phys */
-	memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlReply_t));
-	mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
-	mpi_request.Operation = hard_reset ?
-	    MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET;
-	mpi_request.PhyNum = phy->number;
-
-	if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return -ENXIO;
-	}
-
-	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo)
-		printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status"
-		    "(0x%04x), loginfo(0x%08x)\n", ioc->name,
-		    phy->number, le16_to_cpu(mpi_reply.IOCStatus),
-		    le32_to_cpu(mpi_reply.IOCLogInfo));
-
-	return 0;
-}
-
-/**
- * _transport_phy_enable - enable/disable phys
- * @phy: The sas phy object
- * @enable: enable phy when true
- *
- * Only support sas_host direct attached phys.
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_phy_enable(struct sas_phy *phy, int enable)
-{
-	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
-	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
-	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
-	Mpi2ConfigReply_t mpi_reply;
-	u16 ioc_status;
-	u16 sz;
-	int rc = 0;
-	unsigned long flags;
-	int i, discovery_active;
-
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	if (_transport_sas_node_find_by_sas_address(ioc,
-	    phy->identify.sas_address) == NULL) {
-		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-		return -EINVAL;
-	}
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
-	/* handle expander phys */
-	if (phy->identify.sas_address != ioc->sas_hba.sas_address)
-		return _transport_expander_phy_control(ioc, phy,
-		    (enable == 1) ? SMP_PHY_CONTROL_LINK_RESET :
-		    SMP_PHY_CONTROL_DISABLE);
-
-	/* handle hba phys */
-
-	/* read sas_iounit page 0 */
-	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
-	    sizeof(Mpi2SasIOUnit0PhyData_t));
-	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
-	if (!sas_iounit_pg0) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -ENOMEM;
-		goto out;
-	}
-	if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
-	    sas_iounit_pg0, sz))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -ENXIO;
-		goto out;
-	}
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -EIO;
-		goto out;
-	}
-
-	/* unable to enable/disable phys when when discovery is active */
-	for (i = 0, discovery_active = 0; i < ioc->sas_hba.num_phys ; i++) {
-		if (sas_iounit_pg0->PhyData[i].PortFlags &
-		    MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS) {
-			printk(MPT2SAS_ERR_FMT "discovery is active on "
-			    "port = %d, phy = %d: unable to enable/disable "
-			    "phys, try again later!\n", ioc->name,
-			    sas_iounit_pg0->PhyData[i].Port, i);
-			discovery_active = 1;
-		}
-	}
-
-	if (discovery_active) {
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	/* read sas_iounit page 1 */
-	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
-	    sizeof(Mpi2SasIOUnit1PhyData_t));
-	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
-	if (!sas_iounit_pg1) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -ENOMEM;
-		goto out;
-	}
-	if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
-	    sas_iounit_pg1, sz))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -ENXIO;
-		goto out;
-	}
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -EIO;
-		goto out;
-	}
-	/* copy Port/PortFlags/PhyFlags from page 0 */
-	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
-		sas_iounit_pg1->PhyData[i].Port =
-		    sas_iounit_pg0->PhyData[i].Port;
-		sas_iounit_pg1->PhyData[i].PortFlags =
-		    (sas_iounit_pg0->PhyData[i].PortFlags &
-		    MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG);
-		sas_iounit_pg1->PhyData[i].PhyFlags =
-		    (sas_iounit_pg0->PhyData[i].PhyFlags &
-		    (MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED +
-		    MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED));
-	}
-	if (enable)
-		sas_iounit_pg1->PhyData[phy->number].PhyFlags
-		    &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
-	else
-		sas_iounit_pg1->PhyData[phy->number].PhyFlags
-		    |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
-
-	mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz);
-
-	/* link reset */
-	if (enable)
-		_transport_phy_reset(phy, 0);
-
- out:
-	kfree(sas_iounit_pg1);
-	kfree(sas_iounit_pg0);
-	return rc;
-}
-
-/**
- * _transport_phy_speed - set phy min/max link rates
- * @phy: The sas phy object
- * @rates: rates defined in sas_phy_linkrates
- *
- * Only support sas_host direct attached phys.
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
-{
-	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
-	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
-	Mpi2SasPhyPage0_t phy_pg0;
-	Mpi2ConfigReply_t mpi_reply;
-	u16 ioc_status;
-	u16 sz;
-	int i;
-	int rc = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioc->sas_node_lock, flags);
-	if (_transport_sas_node_find_by_sas_address(ioc,
-	    phy->identify.sas_address) == NULL) {
-		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-		return -EINVAL;
-	}
-	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-
-	if (!rates->minimum_linkrate)
-		rates->minimum_linkrate = phy->minimum_linkrate;
-	else if (rates->minimum_linkrate < phy->minimum_linkrate_hw)
-		rates->minimum_linkrate = phy->minimum_linkrate_hw;
-
-	if (!rates->maximum_linkrate)
-		rates->maximum_linkrate = phy->maximum_linkrate;
-	else if (rates->maximum_linkrate > phy->maximum_linkrate_hw)
-		rates->maximum_linkrate = phy->maximum_linkrate_hw;
-
-	/* handle expander phys */
-	if (phy->identify.sas_address != ioc->sas_hba.sas_address) {
-		phy->minimum_linkrate = rates->minimum_linkrate;
-		phy->maximum_linkrate = rates->maximum_linkrate;
-		return _transport_expander_phy_control(ioc, phy,
-		    SMP_PHY_CONTROL_LINK_RESET);
-	}
-
-	/* handle hba phys */
-
-	/* sas_iounit page 1 */
-	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
-	    sizeof(Mpi2SasIOUnit1PhyData_t));
-	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
-	if (!sas_iounit_pg1) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -ENOMEM;
-		goto out;
-	}
-	if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
-	    sas_iounit_pg1, sz))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -ENXIO;
-		goto out;
-	}
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -EIO;
-		goto out;
-	}
-
-	for (i = 0; i < ioc->sas_hba.num_phys; i++) {
-		if (phy->number != i) {
-			sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
-			    (ioc->sas_hba.phy[i].phy->minimum_linkrate +
-			    (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4));
-		} else {
-			sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
-			    (rates->minimum_linkrate +
-			    (rates->maximum_linkrate << 4));
-		}
-	}
-
-	if (mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
-	    sz)) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		rc = -ENXIO;
-		goto out;
-	}
-
-	/* link reset */
-	_transport_phy_reset(phy, 0);
-
-	/* read phy page 0, then update the rates in the sas transport phy */
-	if (!mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
-	    phy->number)) {
-		phy->minimum_linkrate = _transport_convert_phy_link_rate(
-		    phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
-		phy->maximum_linkrate = _transport_convert_phy_link_rate(
-		    phy_pg0.ProgrammedLinkRate >> 4);
-		phy->negotiated_linkrate = _transport_convert_phy_link_rate(
-		    phy_pg0.NegotiatedLinkRate &
-		    MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
-	}
-
- out:
-	kfree(sas_iounit_pg1);
-	return rc;
-}
-
-
-/**
- * _transport_smp_handler - transport portal for smp passthru
- * @shost: shost object
- * @rphy: sas transport rphy object
- * @req:
- *
- * This used primarily for smp_utils.
- * Example:
- *           smp_rep_general /sys/class/bsg/expander-5:0
- */
-static int
-_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
-    struct request *req)
-{
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	Mpi2SmpPassthroughRequest_t *mpi_request;
-	Mpi2SmpPassthroughReply_t *mpi_reply;
-	int rc;
-	u16 smid;
-	u32 ioc_state;
-	unsigned long timeleft;
-	void *psge;
-	u32 sgl_flags;
-	u8 issue_reset = 0;
-	dma_addr_t dma_addr_in = 0;
-	dma_addr_t dma_addr_out = 0;
-	dma_addr_t pci_dma_in = 0;
-	dma_addr_t pci_dma_out = 0;
-	void *pci_addr_in = NULL;
-	void *pci_addr_out = NULL;
-	u16 wait_state_count;
-	struct request *rsp = req->next_rq;
-	struct bio_vec bvec;
-	struct bvec_iter iter;
-
-	if (!rsp) {
-		printk(MPT2SAS_ERR_FMT "%s: the smp response space is "
-		    "missing\n", ioc->name, __func__);
-		return -EINVAL;
-	}
-	if (ioc->shost_recovery || ioc->pci_error_recovery) {
-		printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
-		    __func__, ioc->name);
-		return -EFAULT;
-	}
-
-	rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex);
-	if (rc)
-		return rc;
-
-	if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) {
-		printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n", ioc->name,
-		    __func__);
-		rc = -EAGAIN;
-		goto out;
-	}
-	ioc->transport_cmds.status = MPT2_CMD_PENDING;
-
-	/* Check if the request is split across multiple segments */
-	if (bio_multiple_segments(req->bio)) {
-		u32 offset = 0;
-
-		/* Allocate memory and copy the request */
-		pci_addr_out = pci_alloc_consistent(ioc->pdev,
-		    blk_rq_bytes(req), &pci_dma_out);
-		if (!pci_addr_out) {
-			printk(MPT2SAS_INFO_FMT "%s(): PCI Addr out = NULL\n",
-			    ioc->name, __func__);
-			rc = -ENOMEM;
-			goto out;
-		}
-
-		bio_for_each_segment(bvec, req->bio, iter) {
-			memcpy(pci_addr_out + offset,
-			    page_address(bvec.bv_page) + bvec.bv_offset,
-			    bvec.bv_len);
-			offset += bvec.bv_len;
-		}
-	} else {
-		dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio),
-		    blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
-		if (!dma_addr_out) {
-			printk(MPT2SAS_INFO_FMT "%s(): DMA Addr out = NULL\n",
-			    ioc->name, __func__);
-			rc = -ENOMEM;
-			goto free_pci;
-		}
-	}
-
-	/* Check if the response needs to be populated across
-	 * multiple segments */
-	if (bio_multiple_segments(rsp->bio)) {
-		pci_addr_in = pci_alloc_consistent(ioc->pdev, blk_rq_bytes(rsp),
-		    &pci_dma_in);
-		if (!pci_addr_in) {
-			printk(MPT2SAS_INFO_FMT "%s(): PCI Addr in = NULL\n",
-			    ioc->name, __func__);
-			rc = -ENOMEM;
-			goto unmap;
-		}
-	} else {
-		dma_addr_in =  pci_map_single(ioc->pdev, bio_data(rsp->bio),
-		    blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
-		if (!dma_addr_in) {
-			printk(MPT2SAS_INFO_FMT "%s(): DMA Addr in = NULL\n",
-			    ioc->name, __func__);
-			rc = -ENOMEM;
-			goto unmap;
-		}
-	}
-
-	wait_state_count = 0;
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			printk(MPT2SAS_ERR_FMT
-			    "%s: failed due to ioc not operational\n",
-			    ioc->name, __func__);
-			rc = -EFAULT;
-			goto unmap;
-		}
-		ssleep(1);
-		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-		printk(MPT2SAS_INFO_FMT "%s: waiting for "
-		    "operational state(count=%d)\n", ioc->name,
-		    __func__, wait_state_count);
-	}
-	if (wait_state_count)
-		printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
-		    ioc->name, __func__);
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		rc = -EAGAIN;
-		goto unmap;
-	}
-
-	rc = 0;
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->transport_cmds.smid = smid;
-
-	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
-	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
-	mpi_request->PhysicalPort = 0xFF;
-	mpi_request->VF_ID = 0; /* TODO */
-	mpi_request->VP_ID = 0;
-	mpi_request->SASAddress = (rphy) ?
-	    cpu_to_le64(rphy->identify.sas_address) :
-	    cpu_to_le64(ioc->sas_hba.sas_address);
-	mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
-	psge = &mpi_request->SGL;
-
-	/* WRITE sgel first */
-	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
-	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-	if (bio_multiple_segments(req->bio)) {
-		ioc->base_add_sg_single(psge, sgl_flags |
-		    (blk_rq_bytes(req) - 4), pci_dma_out);
-	} else {
-		ioc->base_add_sg_single(psge, sgl_flags |
-		    (blk_rq_bytes(req) - 4), dma_addr_out);
-	}
-
-	/* incr sgel */
-	psge += ioc->sge_size;
-
-	/* READ sgel last */
-	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
-	    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
-	    MPI2_SGE_FLAGS_END_OF_LIST);
-	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
-	if (bio_multiple_segments(rsp->bio)) {
-		ioc->base_add_sg_single(psge, sgl_flags |
-		    (blk_rq_bytes(rsp) + 4), pci_dma_in);
-	} else {
-		ioc->base_add_sg_single(psge, sgl_flags |
-		    (blk_rq_bytes(rsp) + 4), dma_addr_in);
-	}
-
-	dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "%s - "
-	    "sending smp request\n", ioc->name, __func__));
-
-	init_completion(&ioc->transport_cmds.done);
-	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
-	    10*HZ);
-
-	if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) {
-		printk(MPT2SAS_ERR_FMT "%s : timeout\n",
-		    __func__, ioc->name);
-		_debug_dump_mf(mpi_request,
-		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
-		if (!(ioc->transport_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
-		goto issue_host_reset;
-	}
-
-	dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT "%s - "
-	    "complete\n", ioc->name, __func__));
-
-	if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) {
-
-		mpi_reply = ioc->transport_cmds.reply;
-
-		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "%s - reply data transfer size(%d)\n",
-		    ioc->name, __func__,
-		    le16_to_cpu(mpi_reply->ResponseDataLength)));
-
-		memcpy(req->sense, mpi_reply, sizeof(*mpi_reply));
-		req->sense_len = sizeof(*mpi_reply);
-		req->resid_len = 0;
-		rsp->resid_len -=
-		    le16_to_cpu(mpi_reply->ResponseDataLength);
-		/* check if the resp needs to be copied from the allocated
-		 * pci mem */
-		if (bio_multiple_segments(rsp->bio)) {
-			u32 offset = 0;
-			u32 bytes_to_copy =
-			    le16_to_cpu(mpi_reply->ResponseDataLength);
-			bio_for_each_segment(bvec, rsp->bio, iter) {
-				if (bytes_to_copy <= bvec.bv_len) {
-					memcpy(page_address(bvec.bv_page) +
-					    bvec.bv_offset, pci_addr_in +
-					    offset, bytes_to_copy);
-					break;
-				} else {
-					memcpy(page_address(bvec.bv_page) +
-					    bvec.bv_offset, pci_addr_in +
-					    offset, bvec.bv_len);
-					bytes_to_copy -= bvec.bv_len;
-				}
-				offset += bvec.bv_len;
-			}
-		}
-	} else {
-		dtransportprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "%s - no reply\n", ioc->name, __func__));
-		rc = -ENXIO;
-	}
-
- issue_host_reset:
-	if (issue_reset) {
-		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-		rc = -ETIMEDOUT;
-	}
-
- unmap:
-	if (dma_addr_out)
-		pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req),
-		    PCI_DMA_BIDIRECTIONAL);
-	if (dma_addr_in)
-		pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp),
-		    PCI_DMA_BIDIRECTIONAL);
-
- free_pci:
-	if (pci_addr_out)
-		pci_free_consistent(ioc->pdev, blk_rq_bytes(req), pci_addr_out,
-		    pci_dma_out);
-
-	if (pci_addr_in)
-		pci_free_consistent(ioc->pdev, blk_rq_bytes(rsp), pci_addr_in,
-		    pci_dma_in);
-
- out:
-	ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
-	mutex_unlock(&ioc->transport_cmds.mutex);
-	return rc;
-}
-
-struct sas_function_template mpt2sas_transport_functions = {
-	.get_linkerrors		= _transport_get_linkerrors,
-	.get_enclosure_identifier = _transport_get_enclosure_identifier,
-	.get_bay_identifier	= _transport_get_bay_identifier,
-	.phy_reset		= _transport_phy_reset,
-	.phy_enable		= _transport_phy_enable,
-	.set_phy_speed		= _transport_phy_speed,
-	.smp_handler		= _transport_smp_handler,
-};
-
-struct scsi_transport_template *mpt2sas_transport_template;
diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig
index 4d235dd74..b736dbc80 100644
--- a/drivers/scsi/mpt3sas/Kconfig
+++ b/drivers/scsi/mpt3sas/Kconfig
@@ -41,15 +41,15 @@
 # USA.
 
 config SCSI_MPT3SAS
-	tristate "LSI MPT Fusion SAS 3.0 Device Driver"
+	tristate "LSI MPT Fusion SAS 3.0 & SAS 2.0 Device Driver"
 	depends on PCI && SCSI
 	select SCSI_SAS_ATTRS
 	select RAID_ATTRS
 	---help---
 	This driver supports PCI-Express SAS 12Gb/s Host Adapters.
 
-config SCSI_MPT3SAS_MAX_SGE
-	int "LSI MPT Fusion Max number of SG Entries (16 - 256)"
+config SCSI_MPT2SAS_MAX_SGE
+	int "LSI MPT Fusion SAS 2.0 Max number of SG Entries (16 - 256)"
 	depends on PCI && SCSI && SCSI_MPT3SAS
 	default "128"
 	range 16 256
@@ -60,8 +60,23 @@ config SCSI_MPT3SAS_MAX_SGE
 	can be 256. However, it may decreased down to 16.  Decreasing this
 	parameter will reduce memory requirements on a per controller instance.
 
-config SCSI_MPT3SAS_LOGGING
-	bool "LSI MPT Fusion logging facility"
+config SCSI_MPT3SAS_MAX_SGE
+	int "LSI MPT Fusion SAS 3.0 Max number of SG Entries (16 - 256)"
 	depends on PCI && SCSI && SCSI_MPT3SAS
+	default "128"
+	range 16 256
+	---help---
+	This option allows you to specify the maximum number of scatter-
+	gather entries per I/O. The driver default is 128, which matches
+	MAX_PHYS_SEGMENTS in most kernels.  However in SuSE kernels this
+	can be 256. However, it may decreased down to 16.  Decreasing this
+	parameter will reduce memory requirements on a per controller instance.
+
+config SCSI_MPT2SAS
+	tristate "Legacy MPT2SAS config option"
+	default n
+	select SCSI_MPT3SAS
+	depends on PCI && SCSI
 	---help---
-	This turns on a logging facility.
+	Dummy config option for backwards compatiblity: configure the MPT3SAS
+	driver instead.
diff --git a/drivers/scsi/mpt3sas/Makefile b/drivers/scsi/mpt3sas/Makefile
index efb0c4c2e..b7643f596 100644
--- a/drivers/scsi/mpt3sas/Makefile
+++ b/drivers/scsi/mpt3sas/Makefile
@@ -5,4 +5,5 @@ mpt3sas-y +=  mpt3sas_base.o     \
 		mpt3sas_scsih.o      \
 		mpt3sas_transport.o     \
 		mpt3sas_ctl.o	\
-		mpt3sas_trigger_diag.o
+		mpt3sas_trigger_diag.o \
+		mpt3sas_warpdrive.o
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index d4f1dcdb8..11393ebf1 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -108,9 +108,12 @@ _scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
 	if (ret)
 		return ret;
 
+	/* global ioc spinlock to protect controller list on list operations */
 	pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug);
+	spin_lock(&gioc_lock);
 	list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
 		ioc->fwfault_debug = mpt3sas_fwfault_debug;
+	spin_unlock(&gioc_lock);
 	return 0;
 }
 module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
@@ -157,7 +160,7 @@ _base_fault_reset_work(struct work_struct *work)
 
 
 	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	if (ioc->shost_recovery)
+	if (ioc->shost_recovery || ioc->pci_error_recovery)
 		goto rearm_timer;
 	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 
@@ -166,6 +169,20 @@ _base_fault_reset_work(struct work_struct *work)
 		pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n",
 		    ioc->name);
 
+		/* It may be possible that EEH recovery can resolve some of
+		 * pci bus failure issues rather removing the dead ioc function
+		 * by considering controller is in a non-operational state. So
+		 * here priority is given to the EEH recovery. If it doesn't
+		 * not resolve this issue, mpt3sas driver will consider this
+		 * controller to non-operational state and remove the dead ioc
+		 * function.
+		 */
+		if (ioc->non_operational_loop++ < 5) {
+			spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock,
+							 flags);
+			goto rearm_timer;
+		}
+
 		/*
 		 * Call _scsih_flush_pending_cmds callback so that we flush all
 		 * pending commands back to OS. This call is required to aovid
@@ -181,7 +198,7 @@ _base_fault_reset_work(struct work_struct *work)
 		ioc->remove_host = 1;
 		/*Remove the Dead Host */
 		p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc,
-		    "mpt3sas_dead_ioc_%d", ioc->id);
+		    "%s_dead_ioc_%d", ioc->driver_name, ioc->id);
 		if (IS_ERR(p))
 			pr_err(MPT3SAS_FMT
 			"%s: Running mpt3sas_dead_ioc thread failed !!!!\n",
@@ -193,6 +210,8 @@ _base_fault_reset_work(struct work_struct *work)
 		return; /* don't rearm timer */
 	}
 
+	ioc->non_operational_loop = 0;
+
 	if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) {
 		rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 		    FORCE_BIG_HAMMER);
@@ -235,7 +254,8 @@ mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc)
 
 	INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
 	snprintf(ioc->fault_reset_work_q_name,
-	    sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
+	    sizeof(ioc->fault_reset_work_q_name), "poll_%s%d_status",
+	    ioc->driver_name, ioc->id);
 	ioc->fault_reset_work_q =
 		create_singlethread_workqueue(ioc->fault_reset_work_q_name);
 	if (!ioc->fault_reset_work_q) {
@@ -324,7 +344,6 @@ mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc)
 		panic("panic in %s\n", __func__);
 }
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 /**
  * _base_sas_ioc_info - verbose translation of the ioc status
  * @ioc: per adapter object
@@ -578,7 +597,8 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
 		desc = "Device Status Change";
 		break;
 	case MPI2_EVENT_IR_OPERATION_STATUS:
-		desc = "IR Operation Status";
+		if (!ioc->hide_ir_msg)
+			desc = "IR Operation Status";
 		break;
 	case MPI2_EVENT_SAS_DISCOVERY:
 	{
@@ -609,16 +629,20 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
 		desc = "SAS Enclosure Device Status Change";
 		break;
 	case MPI2_EVENT_IR_VOLUME:
-		desc = "IR Volume";
+		if (!ioc->hide_ir_msg)
+			desc = "IR Volume";
 		break;
 	case MPI2_EVENT_IR_PHYSICAL_DISK:
-		desc = "IR Physical Disk";
+		if (!ioc->hide_ir_msg)
+			desc = "IR Physical Disk";
 		break;
 	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
-		desc = "IR Configuration Change List";
+		if (!ioc->hide_ir_msg)
+			desc = "IR Configuration Change List";
 		break;
 	case MPI2_EVENT_LOG_ENTRY_ADDED:
-		desc = "Log Entry Added";
+		if (!ioc->hide_ir_msg)
+			desc = "Log Entry Added";
 		break;
 	case MPI2_EVENT_TEMP_THRESHOLD:
 		desc = "Temperature Threshold";
@@ -630,7 +654,6 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
 
 	pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc);
 }
-#endif
 
 /**
  * _base_sas_log_info - verbose translation of firmware log info
@@ -675,7 +698,10 @@ _base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info)
 		originator_str = "PL";
 		break;
 	case 2:
-		originator_str = "IR";
+		if (!ioc->hide_ir_msg)
+			originator_str = "IR";
+		else
+			originator_str = "WarpDrive";
 		break;
 	}
 
@@ -710,13 +736,13 @@ _base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 		return;
 	}
 	ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
 	if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
 	    (ioc->logging_level & MPT_DEBUG_REPLY)) {
 		_base_sas_ioc_info(ioc , mpi_reply,
 		   mpt3sas_base_get_msg_frame(ioc, smid));
 	}
-#endif
+
 	if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
 		loginfo = le32_to_cpu(mpi_reply->IOCLogInfo);
 		_base_sas_log_info(ioc, loginfo);
@@ -783,9 +809,9 @@ _base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
 		return 1;
 	if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
 		return 1;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
 	_base_display_event_data(ioc, mpi_reply);
-#endif
+
 	if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
 		goto out;
 	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
@@ -1009,6 +1035,12 @@ _base_interrupt(int irq, void *bus_id)
 	}
 
 	wmb();
+	if (ioc->is_warpdrive) {
+		writel(reply_q->reply_post_host_index,
+		ioc->reply_post_host_index[msix_index]);
+		atomic_dec(&reply_q->busy);
+		return IRQ_HANDLED;
+	}
 
 	/* Update Reply Post Host Index.
 	 * For those HBA's which support combined reply queue feature
@@ -1320,6 +1352,149 @@ _base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr)
 }
 
 /**
+ * _base_build_sg_scmd - main sg creation routine
+ * @ioc: per adapter object
+ * @scmd: scsi command
+ * @smid: system request message index
+ * Context: none.
+ *
+ * The main routine that builds scatter gather table from a given
+ * scsi request sent via the .queuecommand main handler.
+ *
+ * Returns 0 success, anything else error
+ */
+static int
+_base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc,
+		struct scsi_cmnd *scmd, u16 smid)
+{
+	Mpi2SCSIIORequest_t *mpi_request;
+	dma_addr_t chain_dma;
+	struct scatterlist *sg_scmd;
+	void *sg_local, *chain;
+	u32 chain_offset;
+	u32 chain_length;
+	u32 chain_flags;
+	int sges_left;
+	u32 sges_in_segment;
+	u32 sgl_flags;
+	u32 sgl_flags_last_element;
+	u32 sgl_flags_end_buffer;
+	struct chain_tracker *chain_req;
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+	/* init scatter gather flags */
+	sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT;
+	if (scmd->sc_data_direction == DMA_TO_DEVICE)
+		sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC;
+	sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT)
+	    << MPI2_SGE_FLAGS_SHIFT;
+	sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT |
+	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST)
+	    << MPI2_SGE_FLAGS_SHIFT;
+	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+
+	sg_scmd = scsi_sglist(scmd);
+	sges_left = scsi_dma_map(scmd);
+	if (sges_left < 0) {
+		sdev_printk(KERN_ERR, scmd->device,
+		 "pci_map_sg failed: request for %d bytes!\n",
+		 scsi_bufflen(scmd));
+		return -ENOMEM;
+	}
+
+	sg_local = &mpi_request->SGL;
+	sges_in_segment = ioc->max_sges_in_main_message;
+	if (sges_left <= sges_in_segment)
+		goto fill_in_last_segment;
+
+	mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) +
+	    (sges_in_segment * ioc->sge_size))/4;
+
+	/* fill in main message segment when there is a chain following */
+	while (sges_in_segment) {
+		if (sges_in_segment == 1)
+			ioc->base_add_sg_single(sg_local,
+			    sgl_flags_last_element | sg_dma_len(sg_scmd),
+			    sg_dma_address(sg_scmd));
+		else
+			ioc->base_add_sg_single(sg_local, sgl_flags |
+			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		sg_scmd = sg_next(sg_scmd);
+		sg_local += ioc->sge_size;
+		sges_left--;
+		sges_in_segment--;
+	}
+
+	/* initializing the chain flags and pointers */
+	chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
+	chain_req = _base_get_chain_buffer_tracker(ioc, smid);
+	if (!chain_req)
+		return -1;
+	chain = chain_req->chain_buffer;
+	chain_dma = chain_req->chain_buffer_dma;
+	do {
+		sges_in_segment = (sges_left <=
+		    ioc->max_sges_in_chain_message) ? sges_left :
+		    ioc->max_sges_in_chain_message;
+		chain_offset = (sges_left == sges_in_segment) ?
+		    0 : (sges_in_segment * ioc->sge_size)/4;
+		chain_length = sges_in_segment * ioc->sge_size;
+		if (chain_offset) {
+			chain_offset = chain_offset <<
+			    MPI2_SGE_CHAIN_OFFSET_SHIFT;
+			chain_length += ioc->sge_size;
+		}
+		ioc->base_add_sg_single(sg_local, chain_flags | chain_offset |
+		    chain_length, chain_dma);
+		sg_local = chain;
+		if (!chain_offset)
+			goto fill_in_last_segment;
+
+		/* fill in chain segments */
+		while (sges_in_segment) {
+			if (sges_in_segment == 1)
+				ioc->base_add_sg_single(sg_local,
+				    sgl_flags_last_element |
+				    sg_dma_len(sg_scmd),
+				    sg_dma_address(sg_scmd));
+			else
+				ioc->base_add_sg_single(sg_local, sgl_flags |
+				    sg_dma_len(sg_scmd),
+				    sg_dma_address(sg_scmd));
+			sg_scmd = sg_next(sg_scmd);
+			sg_local += ioc->sge_size;
+			sges_left--;
+			sges_in_segment--;
+		}
+
+		chain_req = _base_get_chain_buffer_tracker(ioc, smid);
+		if (!chain_req)
+			return -1;
+		chain = chain_req->chain_buffer;
+		chain_dma = chain_req->chain_buffer_dma;
+	} while (1);
+
+
+ fill_in_last_segment:
+
+	/* fill the last segment */
+	while (sges_left) {
+		if (sges_left == 1)
+			ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer |
+			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		else
+			ioc->base_add_sg_single(sg_local, sgl_flags |
+			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		sg_scmd = sg_next(sg_scmd);
+		sg_local += ioc->sge_size;
+		sges_left--;
+	}
+
+	return 0;
+}
+
+/**
  * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format
  * @ioc: per adapter object
  * @scmd: scsi command
@@ -1571,6 +1746,14 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
 	int base;
 	u16 message_control;
 
+	/* Check whether controller SAS2008 B0 controller,
+	 * if it is SAS2008 B0 controller use IO-APIC instead of MSIX
+	 */
+	if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
+	    ioc->pdev->revision == SAS2_PCI_DEVICE_B0_REVISION) {
+		return -EINVAL;
+	}
+
 	base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
 	if (!base) {
 		dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n",
@@ -1579,9 +1762,19 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
 	}
 
 	/* get msix vector count */
-
-	pci_read_config_word(ioc->pdev, base + 2, &message_control);
-	ioc->msix_vector_count = (message_control & 0x3FF) + 1;
+	/* NUMA_IO not supported for older controllers */
+	if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2004 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_1 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_2 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_3 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_1 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_2)
+		ioc->msix_vector_count = 1;
+	else {
+		pci_read_config_word(ioc->pdev, base + 2, &message_control);
+		ioc->msix_vector_count = (message_control & 0x3FF) + 1;
+	}
 	dinitprintk(ioc, pr_info(MPT3SAS_FMT
 		"msix is supported, vector_count(%d)\n",
 		ioc->name, ioc->msix_vector_count));
@@ -1643,10 +1836,10 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector)
 	atomic_set(&reply_q->busy, 0);
 	if (ioc->msix_enable)
 		snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
-		    MPT3SAS_DRIVER_NAME, ioc->id, index);
+		    ioc->driver_name, ioc->id, index);
 	else
 		snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
-		    MPT3SAS_DRIVER_NAME, ioc->id);
+		    ioc->driver_name, ioc->id);
 	r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name,
 	    reply_q);
 	if (r) {
@@ -1872,7 +2065,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 
 
 	if (pci_request_selected_regions(pdev, ioc->bars,
-	    MPT3SAS_DRIVER_NAME)) {
+	    ioc->driver_name)) {
 		pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n",
 			ioc->name);
 		ioc->bars = 0;
@@ -2158,6 +2351,7 @@ mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
 		}
 		ioc->scsi_lookup[i].cb_idx = 0xFF;
 		ioc->scsi_lookup[i].scmd = NULL;
+		ioc->scsi_lookup[i].direct_io = 0;
 		list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list);
 		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 
@@ -2318,143 +2512,261 @@ mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
 }
 
 /**
- * _base_display_intel_branding - Display branding string
+ * _base_display_OEMs_branding - Display branding string
  * @ioc: per adapter object
  *
  * Return nothing.
  */
 static void
-_base_display_intel_branding(struct MPT3SAS_ADAPTER *ioc)
+_base_display_OEMs_branding(struct MPT3SAS_ADAPTER *ioc)
 {
 	if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
 		return;
 
-	switch (ioc->pdev->device) {
-	case MPI25_MFGPAGE_DEVID_SAS3008:
-		switch (ioc->pdev->subsystem_device) {
-		case MPT3SAS_INTEL_RMS3JC080_SSDID:
-			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
-				MPT3SAS_INTEL_RMS3JC080_BRANDING);
-			break;
-
-		case MPT3SAS_INTEL_RS3GC008_SSDID:
-			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
-				MPT3SAS_INTEL_RS3GC008_BRANDING);
-			break;
-		case MPT3SAS_INTEL_RS3FC044_SSDID:
-			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
-				MPT3SAS_INTEL_RS3FC044_BRANDING);
-			break;
-		case MPT3SAS_INTEL_RS3UC080_SSDID:
-			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
-				MPT3SAS_INTEL_RS3UC080_BRANDING);
+	switch (ioc->pdev->subsystem_vendor) {
+	case PCI_VENDOR_ID_INTEL:
+		switch (ioc->pdev->device) {
+		case MPI2_MFGPAGE_DEVID_SAS2008:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT2SAS_INTEL_RMS2LL080_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_INTEL_RMS2LL080_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS2LL040_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_INTEL_RMS2LL040_BRANDING);
+				break;
+			case MPT2SAS_INTEL_SSD910_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_INTEL_SSD910_BRANDING);
+				break;
+			default:
+				pr_info(MPT3SAS_FMT
+				 "Intel(R) Controller: Subsystem ID: 0x%X\n",
+				 ioc->name, ioc->pdev->subsystem_device);
+				break;
+			}
+		case MPI2_MFGPAGE_DEVID_SAS2308_2:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT2SAS_INTEL_RS25GB008_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_INTEL_RS25GB008_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25JB080_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_INTEL_RMS25JB080_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25JB040_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_INTEL_RMS25JB040_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25KB080_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_INTEL_RMS25KB080_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25KB040_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_INTEL_RMS25KB040_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25LB040_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_INTEL_RMS25LB040_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25LB080_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_INTEL_RMS25LB080_BRANDING);
+				break;
+			default:
+				pr_info(MPT3SAS_FMT
+				 "Intel(R) Controller: Subsystem ID: 0x%X\n",
+				 ioc->name, ioc->pdev->subsystem_device);
+				break;
+			}
+		case MPI25_MFGPAGE_DEVID_SAS3008:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT3SAS_INTEL_RMS3JC080_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+					MPT3SAS_INTEL_RMS3JC080_BRANDING);
+				break;
+
+			case MPT3SAS_INTEL_RS3GC008_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+					MPT3SAS_INTEL_RS3GC008_BRANDING);
+				break;
+			case MPT3SAS_INTEL_RS3FC044_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+					MPT3SAS_INTEL_RS3FC044_BRANDING);
+				break;
+			case MPT3SAS_INTEL_RS3UC080_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+					MPT3SAS_INTEL_RS3UC080_BRANDING);
+				break;
+			default:
+				pr_info(MPT3SAS_FMT
+				 "Intel(R) Controller: Subsystem ID: 0x%X\n",
+				 ioc->name, ioc->pdev->subsystem_device);
+				break;
+			}
 			break;
 		default:
 			pr_info(MPT3SAS_FMT
-				"Intel(R) Controller: Subsystem ID: 0x%X\n",
-				ioc->name, ioc->pdev->subsystem_device);
+			 "Intel(R) Controller: Subsystem ID: 0x%X\n",
+			 ioc->name, ioc->pdev->subsystem_device);
 			break;
 		}
 		break;
-	default:
-		pr_info(MPT3SAS_FMT
-			"Intel(R) Controller: Subsystem ID: 0x%X\n",
-			ioc->name, ioc->pdev->subsystem_device);
-		break;
-	}
-}
-
-
-
-/**
- * _base_display_dell_branding - Display branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_dell_branding(struct MPT3SAS_ADAPTER *ioc)
-{
-	if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
-		return;
-
-	switch (ioc->pdev->device) {
-	case MPI25_MFGPAGE_DEVID_SAS3008:
-		switch (ioc->pdev->subsystem_device) {
-		case MPT3SAS_DELL_12G_HBA_SSDID:
-			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
-				MPT3SAS_DELL_12G_HBA_BRANDING);
+	case PCI_VENDOR_ID_DELL:
+		switch (ioc->pdev->device) {
+		case MPI2_MFGPAGE_DEVID_SAS2008:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				 MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING);
+				break;
+			case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				 MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING);
+				break;
+			case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				 MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING);
+				break;
+			case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				 MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING);
+				break;
+			case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				 MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING);
+				break;
+			case MPT2SAS_DELL_PERC_H200_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				 MPT2SAS_DELL_PERC_H200_BRANDING);
+				break;
+			case MPT2SAS_DELL_6GBPS_SAS_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				 MPT2SAS_DELL_6GBPS_SAS_BRANDING);
+				break;
+			default:
+				pr_info(MPT3SAS_FMT
+				   "Dell 6Gbps HBA: Subsystem ID: 0x%X\n",
+				   ioc->name, ioc->pdev->subsystem_device);
+				break;
+			}
+			break;
+		case MPI25_MFGPAGE_DEVID_SAS3008:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT3SAS_DELL_12G_HBA_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+					MPT3SAS_DELL_12G_HBA_BRANDING);
+				break;
+			default:
+				pr_info(MPT3SAS_FMT
+				   "Dell 12Gbps HBA: Subsystem ID: 0x%X\n",
+				   ioc->name, ioc->pdev->subsystem_device);
+				break;
+			}
 			break;
 		default:
 			pr_info(MPT3SAS_FMT
-			   "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
+			   "Dell HBA: Subsystem ID: 0x%X\n", ioc->name,
 			   ioc->pdev->subsystem_device);
 			break;
 		}
 		break;
-	default:
-		pr_info(MPT3SAS_FMT
-			"Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
-			ioc->pdev->subsystem_device);
-		break;
-	}
-}
-
-/**
- * _base_display_cisco_branding - Display branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_cisco_branding(struct MPT3SAS_ADAPTER *ioc)
-{
-	if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_CISCO)
-		return;
-
-	switch (ioc->pdev->device) {
-	case MPI25_MFGPAGE_DEVID_SAS3008:
-		switch (ioc->pdev->subsystem_device) {
-		case MPT3SAS_CISCO_12G_8E_HBA_SSDID:
-			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
-				MPT3SAS_CISCO_12G_8E_HBA_BRANDING);
-			break;
-		case MPT3SAS_CISCO_12G_8I_HBA_SSDID:
-			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
-				MPT3SAS_CISCO_12G_8I_HBA_BRANDING);
+	case PCI_VENDOR_ID_CISCO:
+		switch (ioc->pdev->device) {
+		case MPI25_MFGPAGE_DEVID_SAS3008:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT3SAS_CISCO_12G_8E_HBA_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+					MPT3SAS_CISCO_12G_8E_HBA_BRANDING);
+				break;
+			case MPT3SAS_CISCO_12G_8I_HBA_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+					MPT3SAS_CISCO_12G_8I_HBA_BRANDING);
+				break;
+			case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+					MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+				break;
+			default:
+				pr_info(MPT3SAS_FMT
+				  "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+				  ioc->name, ioc->pdev->subsystem_device);
+				break;
+			}
 			break;
-		case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
-			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+		case MPI25_MFGPAGE_DEVID_SAS3108_1:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 				MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+				break;
+			case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING
+				);
+				break;
+			default:
+				pr_info(MPT3SAS_FMT
+				 "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+				 ioc->name, ioc->pdev->subsystem_device);
+				break;
+			}
 			break;
 		default:
 			pr_info(MPT3SAS_FMT
-			  "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
-			  ioc->name, ioc->pdev->subsystem_device);
+			   "Cisco SAS HBA: Subsystem ID: 0x%X\n",
+			   ioc->name, ioc->pdev->subsystem_device);
 			break;
 		}
 		break;
-	case MPI25_MFGPAGE_DEVID_SAS3108_1:
-		switch (ioc->pdev->subsystem_device) {
-		case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
-			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
-			MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
-			break;
-		case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID:
-			pr_info(MPT3SAS_FMT "%s\n", ioc->name,
-			MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING);
-			break;
+	case MPT2SAS_HP_3PAR_SSVID:
+		switch (ioc->pdev->device) {
+		case MPI2_MFGPAGE_DEVID_SAS2004:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING);
+				break;
+			default:
+				pr_info(MPT3SAS_FMT
+				   "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
+				   ioc->name, ioc->pdev->subsystem_device);
+				break;
+			}
+		case MPI2_MFGPAGE_DEVID_SAS2308_2:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT2SAS_HP_2_4_INTERNAL_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_HP_2_4_INTERNAL_BRANDING);
+				break;
+			case MPT2SAS_HP_2_4_EXTERNAL_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_HP_2_4_EXTERNAL_BRANDING);
+				break;
+			case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				 MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING);
+				break;
+			case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID:
+				pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+				    MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING);
+				break;
+			default:
+				pr_info(MPT3SAS_FMT
+				   "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
+				   ioc->name, ioc->pdev->subsystem_device);
+				break;
+			}
 		default:
 			pr_info(MPT3SAS_FMT
-			 "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
-			 ioc->name, ioc->pdev->subsystem_device);
+			   "HP SAS HBA: Subsystem ID: 0x%X\n",
+			   ioc->name, ioc->pdev->subsystem_device);
 			break;
 		}
-		break;
 	default:
-		 pr_info(MPT3SAS_FMT
-			"Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
-			ioc->name, ioc->pdev->subsystem_device);
 		break;
 	}
 }
@@ -2488,9 +2800,7 @@ _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
 	   (bios_version & 0x0000FF00) >> 8,
 	    bios_version & 0x000000FF);
 
-	_base_display_intel_branding(ioc);
-	_base_display_dell_branding(ioc);
-	_base_display_cisco_branding(ioc);
+	_base_display_OEMs_branding(ioc);
 
 	pr_info(MPT3SAS_FMT "Protocol=(", ioc->name);
 
@@ -2508,10 +2818,12 @@ _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
 	pr_info("), ");
 	pr_info("Capabilities=(");
 
-	if (ioc->facts.IOCCapabilities &
+	if (!ioc->hide_ir_msg) {
+		if (ioc->facts.IOCCapabilities &
 		    MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
 			pr_info("Raid");
 			i++;
+		}
 	}
 
 	if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
@@ -2852,18 +3164,22 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc,  int sleep_flag)
 	/* command line tunables for max sgl entries */
 	if (max_sgl_entries != -1)
 		sg_tablesize = max_sgl_entries;
-	else
-		sg_tablesize = MPT3SAS_SG_DEPTH;
+	else {
+		if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+			sg_tablesize = MPT2SAS_SG_DEPTH;
+		else
+			sg_tablesize = MPT3SAS_SG_DEPTH;
+	}
 
-	if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS)
-		sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS;
-	else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) {
+	if (sg_tablesize < MPT_MIN_PHYS_SEGMENTS)
+		sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
+	else if (sg_tablesize > MPT_MAX_PHYS_SEGMENTS) {
 		sg_tablesize = min_t(unsigned short, sg_tablesize,
 				      SCSI_MAX_SG_CHAIN_SEGMENTS);
 		pr_warn(MPT3SAS_FMT
 		 "sg_tablesize(%u) is bigger than kernel"
 		 " defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
-		 sg_tablesize, MPT3SAS_MAX_PHYS_SEGMENTS);
+		 sg_tablesize, MPT_MAX_PHYS_SEGMENTS);
 	}
 	ioc->shost->sg_tablesize = sg_tablesize;
 
@@ -4021,7 +4337,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
 	mpi_request.VF_ID = 0; /* TODO */
 	mpi_request.VP_ID = 0;
-	mpi_request.MsgVersion = cpu_to_le16(MPI25_VERSION);
+	mpi_request.MsgVersion = cpu_to_le16(ioc->hba_mpi_version_belonged);
 	mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
 
 	if (_base_is_controller_msix_enabled(ioc))
@@ -4655,6 +4971,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	u32 reply_address;
 	u16 smid;
 	struct _tr_list *delayed_tr, *delayed_tr_next;
+	u8 hide_flag;
 	struct adapter_reply_queue *reply_q;
 	long reply_post_free;
 	u32 reply_post_free_sz, index = 0;
@@ -4685,6 +5002,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 		ioc->scsi_lookup[i].cb_idx = 0xFF;
 		ioc->scsi_lookup[i].smid = smid;
 		ioc->scsi_lookup[i].scmd = NULL;
+		ioc->scsi_lookup[i].direct_io = 0;
 		list_add_tail(&ioc->scsi_lookup[i].tracker_list,
 		    &ioc->free_list);
 	}
@@ -4787,6 +5105,16 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 
 
 	if (ioc->is_driver_loading) {
+
+		if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier
+		    == 0x80) {
+			hide_flag = (u8) (
+			    le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) &
+			    MFG_PAGE10_HIDE_SSDS_MASK);
+			if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
+				ioc->mfg_pg10_hide_flag = hide_flag;
+		}
+
 		ioc->wait_for_discovery_to_complete =
 		    _base_determine_wait_on_discovery(ioc);
 
@@ -4812,6 +5140,8 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
 	dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
 
+	/* synchronizing freeing resource with pci_access_mutex lock */
+	mutex_lock(&ioc->pci_access_mutex);
 	if (ioc->chip_phys && ioc->chip) {
 		_base_mask_interrupts(ioc);
 		ioc->shost_recovery = 1;
@@ -4820,6 +5150,7 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
 	}
 
 	mpt3sas_base_unmap_resources(ioc);
+	mutex_unlock(&ioc->pci_access_mutex);
 	return;
 }
 
@@ -4834,7 +5165,6 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 {
 	int r, i;
 	int cpu_id, last_cpu_id = 0;
-	u8 revision;
 
 	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
@@ -4854,19 +5184,16 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 		goto out_free_resources;
 	}
 
-	/* Check whether the controller revision is C0 or above.
-	 * only C0 and above revision controllers support 96 MSI-X vectors.
-	 */
-	revision = ioc->pdev->revision;
-
-	if ((ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3004 ||
-	     ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3008 ||
-	     ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_1 ||
-	     ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_2 ||
-	     ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_5 ||
-	     ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_6) &&
-	     (revision >= 0x02))
-		ioc->msix96_vector = 1;
+	if (ioc->is_warpdrive) {
+		ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz,
+		    sizeof(resource_size_t *), GFP_KERNEL);
+		if (!ioc->reply_post_host_index) {
+			dfailprintk(ioc, pr_info(MPT3SAS_FMT "allocation "
+				"for cpu_msix_table failed!!!\n", ioc->name));
+			r = -ENOMEM;
+			goto out_free_resources;
+		}
+	}
 
 	ioc->rdpq_array_enable_assigned = 0;
 	ioc->dma_mask = 0;
@@ -4874,23 +5201,41 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	if (r)
 		goto out_free_resources;
 
+	if (ioc->is_warpdrive) {
+		ioc->reply_post_host_index[0] = (resource_size_t __iomem *)
+		    &ioc->chip->ReplyPostHostIndex;
+
+		for (i = 1; i < ioc->cpu_msix_table_sz; i++)
+			ioc->reply_post_host_index[i] =
+			(resource_size_t __iomem *)
+			((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1)
+			* 4)));
+	}
 
 	pci_set_drvdata(ioc->pdev, ioc->shost);
 	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
 	if (r)
 		goto out_free_resources;
 
-	/*
-	 * In SAS3.0,
-	 * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
-	 * Target Status - all require the IEEE formated scatter gather
-	 * elements.
-	 */
-
-	ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
-	ioc->build_sg = &_base_build_sg_ieee;
-	ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
-	ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
+	switch (ioc->hba_mpi_version_belonged) {
+	case MPI2_VERSION:
+		ioc->build_sg_scmd = &_base_build_sg_scmd;
+		ioc->build_sg = &_base_build_sg;
+		ioc->build_zero_len_sge = &_base_build_zero_len_sge;
+		break;
+	case MPI25_VERSION:
+		/*
+		 * In SAS3.0,
+		 * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
+		 * Target Status - all require the IEEE formated scatter gather
+		 * elements.
+		 */
+		ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
+		ioc->build_sg = &_base_build_sg_ieee;
+		ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
+		ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
+		break;
+	}
 
 	/*
 	 * These function pointers for other requests that don't
@@ -5006,6 +5351,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	if (r)
 		goto out_free_resources;
 
+	ioc->non_operational_loop = 0;
 	return 0;
 
  out_free_resources:
@@ -5016,6 +5362,8 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	_base_release_memory_pools(ioc);
 	pci_set_drvdata(ioc->pdev, NULL);
 	kfree(ioc->cpu_msix_table);
+	if (ioc->is_warpdrive)
+		kfree(ioc->reply_post_host_index);
 	kfree(ioc->pd_handles);
 	kfree(ioc->blocking_handles);
 	kfree(ioc->tm_cmds.reply);
@@ -5055,6 +5403,8 @@ mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc)
 	_base_release_memory_pools(ioc);
 	pci_set_drvdata(ioc->pdev, NULL);
 	kfree(ioc->cpu_msix_table);
+	if (ioc->is_warpdrive)
+		kfree(ioc->reply_post_host_index);
 	kfree(ioc->pd_handles);
 	kfree(ioc->blocking_handles);
 	kfree(ioc->pfacts);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index f0e462b08..5ad271efb 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -63,6 +63,8 @@
 #include <scsi/scsi_transport_sas.h>
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_eh.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
 
 #include "mpt3sas_debug.h"
 #include "mpt3sas_trigger_diag.h"
@@ -71,23 +73,37 @@
 #define MPT3SAS_DRIVER_NAME		"mpt3sas"
 #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
 #define MPT3SAS_DESCRIPTION	"LSI MPT Fusion SAS 3.0 Device Driver"
-#define MPT3SAS_DRIVER_VERSION		"09.100.00.00"
+#define MPT3SAS_DRIVER_VERSION		"09.102.00.00"
 #define MPT3SAS_MAJOR_VERSION		9
-#define MPT3SAS_MINOR_VERSION		100
+#define MPT3SAS_MINOR_VERSION		102
 #define MPT3SAS_BUILD_VERSION		0
 #define MPT3SAS_RELEASE_VERSION	00
 
+#define MPT2SAS_DRIVER_NAME		"mpt2sas"
+#define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
+#define MPT2SAS_DRIVER_VERSION		"20.102.00.00"
+#define MPT2SAS_MAJOR_VERSION		20
+#define MPT2SAS_MINOR_VERSION		102
+#define MPT2SAS_BUILD_VERSION		0
+#define MPT2SAS_RELEASE_VERSION	00
+
 /*
  * Set MPT3SAS_SG_DEPTH value based on user input.
  */
-#define MPT3SAS_MAX_PHYS_SEGMENTS	SCSI_MAX_SG_SEGMENTS
-#define MPT3SAS_MIN_PHYS_SEGMENTS	16
+#define MPT_MAX_PHYS_SEGMENTS	SCSI_MAX_SG_SEGMENTS
+#define MPT_MIN_PHYS_SEGMENTS	16
+
 #ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE
 #define MPT3SAS_SG_DEPTH		CONFIG_SCSI_MPT3SAS_MAX_SGE
 #else
-#define MPT3SAS_SG_DEPTH		MPT3SAS_MAX_PHYS_SEGMENTS
+#define MPT3SAS_SG_DEPTH		MPT_MAX_PHYS_SEGMENTS
 #endif
 
+#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE
+#define MPT2SAS_SG_DEPTH		CONFIG_SCSI_MPT2SAS_MAX_SGE
+#else
+#define MPT2SAS_SG_DEPTH		MPT_MAX_PHYS_SEGMENTS
+#endif
 
 /*
  * Generic Defines
@@ -124,6 +140,16 @@
 #define MPT3SAS_FMT			"%s: "
 
 /*
+ *  WarpDrive Specific Log codes
+ */
+
+#define MPT2_WARPDRIVE_LOGENTRY		(0x8002)
+#define MPT2_WARPDRIVE_LC_SSDT			(0x41)
+#define MPT2_WARPDRIVE_LC_SSDLW		(0x43)
+#define MPT2_WARPDRIVE_LC_SSDLF		(0x44)
+#define MPT2_WARPDRIVE_LC_BRMF			(0x4D)
+
+/*
  * per target private data
  */
 #define MPT_TARGET_FLAGS_RAID_COMPONENT	0x01
@@ -131,9 +157,33 @@
 #define MPT_TARGET_FLAGS_DELETED	0x04
 #define MPT_TARGET_FASTPATH_IO		0x08
 
+#define SAS2_PCI_DEVICE_B0_REVISION	(0x01)
+#define SAS3_PCI_DEVICE_C0_REVISION	(0x02)
+
 /*
  * Intel HBA branding
  */
+#define MPT2SAS_INTEL_RMS25JB080_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25JB080"
+#define MPT2SAS_INTEL_RMS25JB040_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25JB040"
+#define MPT2SAS_INTEL_RMS25KB080_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25KB080"
+#define MPT2SAS_INTEL_RMS25KB040_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25KB040"
+#define MPT2SAS_INTEL_RMS25LB040_BRANDING	\
+	"Intel(R) Integrated RAID Module RMS25LB040"
+#define MPT2SAS_INTEL_RMS25LB080_BRANDING	\
+	"Intel(R) Integrated RAID Module RMS25LB080"
+#define MPT2SAS_INTEL_RMS2LL080_BRANDING	\
+	"Intel Integrated RAID Module RMS2LL080"
+#define MPT2SAS_INTEL_RMS2LL040_BRANDING	\
+	"Intel Integrated RAID Module RMS2LL040"
+#define MPT2SAS_INTEL_RS25GB008_BRANDING       \
+	"Intel(R) RAID Controller RS25GB008"
+#define MPT2SAS_INTEL_SSD910_BRANDING          \
+	"Intel(R) SSD 910 Series"
+
 #define MPT3SAS_INTEL_RMS3JC080_BRANDING       \
 	"Intel(R) Integrated RAID Module RMS3JC080"
 #define MPT3SAS_INTEL_RS3GC008_BRANDING       \
@@ -146,33 +196,62 @@
 /*
  * Intel HBA SSDIDs
  */
-#define MPT3SAS_INTEL_RMS3JC080_SSDID	0x3521
-#define MPT3SAS_INTEL_RS3GC008_SSDID	0x3522
-#define MPT3SAS_INTEL_RS3FC044_SSDID	0x3523
-#define MPT3SAS_INTEL_RS3UC080_SSDID    0x3524
+#define MPT2SAS_INTEL_RMS25JB080_SSDID		0x3516
+#define MPT2SAS_INTEL_RMS25JB040_SSDID		0x3517
+#define MPT2SAS_INTEL_RMS25KB080_SSDID		0x3518
+#define MPT2SAS_INTEL_RMS25KB040_SSDID		0x3519
+#define MPT2SAS_INTEL_RMS25LB040_SSDID		0x351A
+#define MPT2SAS_INTEL_RMS25LB080_SSDID		0x351B
+#define MPT2SAS_INTEL_RMS2LL080_SSDID		0x350E
+#define MPT2SAS_INTEL_RMS2LL040_SSDID		0x350F
+#define MPT2SAS_INTEL_RS25GB008_SSDID		0x3000
+#define MPT2SAS_INTEL_SSD910_SSDID		0x3700
+
+#define MPT3SAS_INTEL_RMS3JC080_SSDID		0x3521
+#define MPT3SAS_INTEL_RS3GC008_SSDID		0x3522
+#define MPT3SAS_INTEL_RS3FC044_SSDID		0x3523
+#define MPT3SAS_INTEL_RS3UC080_SSDID		0x3524
 
 /*
  * Dell HBA branding
  */
+#define MPT2SAS_DELL_BRANDING_SIZE                 32
+
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING        "Dell 6Gbps SAS HBA"
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING    "Dell PERC H200 Adapter"
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
+#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING    "Dell PERC H200 Modular"
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING   "Dell PERC H200 Embedded"
+#define MPT2SAS_DELL_PERC_H200_BRANDING            "Dell PERC H200"
+#define MPT2SAS_DELL_6GBPS_SAS_BRANDING            "Dell 6Gbps SAS"
+
 #define MPT3SAS_DELL_12G_HBA_BRANDING       \
 	"Dell 12Gbps HBA"
 
 /*
  * Dell HBA SSDIDs
  */
-#define MPT3SAS_DELL_12G_HBA_SSDID	0x1F46
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID	0x1F1C
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID	0x1F1D
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID	0x1F1E
+#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID	0x1F1F
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID	0x1F20
+#define MPT2SAS_DELL_PERC_H200_SSDID		0x1F21
+#define MPT2SAS_DELL_6GBPS_SAS_SSDID		0x1F22
+
+#define MPT3SAS_DELL_12G_HBA_SSDID		0x1F46
 
 /*
  * Cisco HBA branding
  */
 #define MPT3SAS_CISCO_12G_8E_HBA_BRANDING		\
-		"Cisco 9300-8E 12G SAS HBA"
+	"Cisco 9300-8E 12G SAS HBA"
 #define MPT3SAS_CISCO_12G_8I_HBA_BRANDING		\
-		"Cisco 9300-8i 12G SAS HBA"
+	"Cisco 9300-8i 12G SAS HBA"
 #define MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING	\
-		"Cisco 12G Modular SAS Pass through Controller"
+	"Cisco 12G Modular SAS Pass through Controller"
 #define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING		\
-		"UCS C3X60 12G SAS Pass through Controller"
+	"UCS C3X60 12G SAS Pass through Controller"
 /*
  * Cisco HBA SSSDIDs
  */
@@ -189,6 +268,31 @@
 #define MPT3_DIAG_BUFFER_IS_DIAG_RESET	(0x04)
 
 /*
+ * HP HBA branding
+ */
+#define MPT2SAS_HP_3PAR_SSVID                0x1590
+
+#define MPT2SAS_HP_2_4_INTERNAL_BRANDING	\
+	"HP H220 Host Bus Adapter"
+#define MPT2SAS_HP_2_4_EXTERNAL_BRANDING	\
+	"HP H221 Host Bus Adapter"
+#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING	\
+	"HP H222 Host Bus Adapter"
+#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING	\
+	"HP H220i Host Bus Adapter"
+#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING	\
+	"HP H210i Host Bus Adapter"
+
+/*
+ * HO HBA SSDIDs
+ */
+#define MPT2SAS_HP_2_4_INTERNAL_SSDID			0x0041
+#define MPT2SAS_HP_2_4_EXTERNAL_SSDID			0x0042
+#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID	0x0043
+#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID		0x0044
+#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID		0x0046
+
+/*
  * Combined Reply Queue constants,
  * There are twelve Supplemental Reply Post Host Index Registers
  * and each register is at offset 0x10 bytes from the previous one.
@@ -243,20 +347,24 @@ struct Mpi2ManufacturingPage11_t {
  * struct MPT3SAS_TARGET - starget private hostdata
  * @starget: starget object
  * @sas_address: target sas address
+ * @raid_device: raid_device pointer to access volume data
  * @handle: device handle
  * @num_luns: number luns
  * @flags: MPT_TARGET_FLAGS_XXX flags
  * @deleted: target flaged for deletion
  * @tm_busy: target is busy with TM request.
+ * @sdev: The sas_device associated with this target
  */
 struct MPT3SAS_TARGET {
 	struct scsi_target *starget;
 	u64	sas_address;
+	struct _raid_device *raid_device;
 	u16	handle;
 	int	num_luns;
 	u32	flags;
 	u8	deleted;
 	u8	tm_busy;
+	struct _sas_device *sdev;
 };
 
 
@@ -266,6 +374,11 @@ struct MPT3SAS_TARGET {
 #define MPT_DEVICE_FLAGS_INIT		0x01
 #define MPT_DEVICE_TLR_ON		0x02
 
+#define MFG_PAGE10_HIDE_SSDS_MASK	(0x00000003)
+#define MFG_PAGE10_HIDE_ALL_DISKS	(0x00)
+#define MFG_PAGE10_EXPOSE_ALL_DISKS	(0x01)
+#define MFG_PAGE10_HIDE_IF_VOL_PRESENT	(0x02)
+
 /**
  * struct MPT3SAS_DEVICE - sdev private hostdata
  * @sas_target: starget private hostdata
@@ -358,8 +471,24 @@ struct _sas_device {
 	u8	pend_sas_rphy_add;
 	u8	enclosure_level;
 	u8	connector_name[4];
+	struct kref refcount;
 };
 
+static inline void sas_device_get(struct _sas_device *s)
+{
+	kref_get(&s->refcount);
+}
+
+static inline void sas_device_free(struct kref *r)
+{
+	kfree(container_of(r, struct _sas_device, refcount));
+}
+
+static inline void sas_device_put(struct _sas_device *s)
+{
+	kref_put(&s->refcount, sas_device_free);
+}
+
 /**
  * struct _raid_device - raid volume link list
  * @list: sas device list
@@ -367,6 +496,7 @@ struct _sas_device {
  * @sdev: scsi device struct (volumes are single lun)
  * @wwid: unique identifier for the volume
  * @handle: device handle
+ * @block_size: Block size of the volume
  * @id: target id
  * @channel: target channel
  * @volume_type: the raid level
@@ -374,6 +504,13 @@ struct _sas_device {
  * @num_pds: number of hidden raid components
  * @responding: used in _scsih_raid_device_mark_responding
  * @percent_complete: resync percent complete
+ * @direct_io_enabled: Whether direct io to PDs are allowed or not
+ * @stripe_exponent: X where 2powX is the stripe sz in blocks
+ * @block_exponent: X where 2powX is the block sz in bytes
+ * @max_lba: Maximum number of LBA in the volume
+ * @stripe_sz: Stripe Size of the volume
+ * @device_info: Device info of the volume member disk
+ * @pd_handle: Array of handles of the physical drives for direct I/O in le16
  */
 #define MPT_MAX_WARPDRIVE_PDS		8
 struct _raid_device {
@@ -382,13 +519,20 @@ struct _raid_device {
 	struct scsi_device *sdev;
 	u64	wwid;
 	u16	handle;
+	u16	block_sz;
 	int	id;
 	int	channel;
 	u8	volume_type;
 	u8	num_pds;
 	u8	responding;
 	u8	percent_complete;
+	u8	direct_io_enabled;
+	u8	stripe_exponent;
+	u8	block_exponent;
+	u64	max_lba;
+	u32	stripe_sz;
 	u32	device_info;
+	u16	pd_handle[MPT_MAX_WARPDRIVE_PDS];
 };
 
 /**
@@ -497,12 +641,14 @@ struct chain_tracker {
  * @smid: system message id
  * @scmd: scsi request pointer
  * @cb_idx: callback index
+ * @direct_io: To indicate whether I/O is direct (WARPDRIVE)
  * @tracker_list: list of free request (ioc->free_list)
  */
 struct scsiio_tracker {
 	u16	smid;
 	struct scsi_cmnd *scmd;
 	u8	cb_idx;
+	u8	direct_io;
 	struct list_head chain_list;
 	struct list_head tracker_list;
 };
@@ -775,7 +921,13 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
  * @replyPostRegisterIndex: index of next position in Reply Desc Post Queue
  * @delayed_tr_list: target reset link list
  * @delayed_tr_volume_list: volume target reset link list
- * @@temp_sensors_count: flag to carry the number of temperature sensors
+ * @temp_sensors_count: flag to carry the number of temperature sensors
+ * @pci_access_mutex: Mutex to synchronize ioctl,sysfs show path and
+ *	pci resource handling. PCI resource freeing will lead to free
+ *	vital hardware/memory resource, which might be in use by cli/sysfs
+ *	path functions resulting in Null pointer reference followed by kernel
+ *	crash. To avoid the above race condition we use mutex syncrhonization
+ *	which ensures the syncrhonization between cli/sysfs_show path.
  */
 struct MPT3SAS_ADAPTER {
 	struct list_head list;
@@ -783,6 +935,7 @@ struct MPT3SAS_ADAPTER {
 	u8		id;
 	int		cpu_count;
 	char		name[MPT_NAME_LENGTH];
+	char		driver_name[MPT_NAME_LENGTH];
 	char		tmp_string[MPT_STRING_LENGTH];
 	struct pci_dev	*pdev;
 	Mpi2SystemInterfaceRegs_t __iomem *chip;
@@ -829,8 +982,10 @@ struct MPT3SAS_ADAPTER {
 	u16		msix_vector_count;
 	u8		*cpu_msix_table;
 	u16		cpu_msix_table_sz;
+	resource_size_t __iomem **reply_post_host_index;
 	u32		ioc_reset_count;
 	MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
+	u32             non_operational_loop;
 
 	/* internal commands, callback index */
 	u8		scsi_io_cb_idx;
@@ -859,6 +1014,7 @@ struct MPT3SAS_ADAPTER {
 	MPT_BUILD_SG    build_sg;
 	MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge;
 	u16             sge_size_ieee;
+	u16		hba_mpi_version_belonged;
 
 	/* function ptr for MPI sg elements only */
 	MPT_BUILD_SG    build_sg_mpi;
@@ -987,6 +1143,7 @@ struct MPT3SAS_ADAPTER {
 	struct list_head delayed_tr_list;
 	struct list_head delayed_tr_volume_list;
 	u8		temp_sensors_count;
+	struct mutex pci_access_mutex;
 
 	/* diag buffer support */
 	u8		*diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
@@ -998,6 +1155,10 @@ struct MPT3SAS_ADAPTER {
 	u32		diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
 	u32		ring_buffer_offset;
 	u32		ring_buffer_sz;
+	u8		is_warpdrive;
+	u8		hide_ir_msg;
+	u8		mfg_pg10_hide_flag;
+	u8		hide_drives;
 	spinlock_t	diag_trigger_lock;
 	u8		diag_trigger_active;
 	struct SL_WH_MASTER_TRIGGER_T diag_trigger_master;
@@ -1012,6 +1173,19 @@ typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 
 /* base shared API */
 extern struct list_head mpt3sas_ioc_list;
+extern char    driver_name[MPT_NAME_LENGTH];
+/* spinlock on list operations over IOCs
+ * Case: when multiple warpdrive cards(IOCs) are in use
+ * Each IOC will added to the ioc list structure on initialization.
+ * Watchdog threads run at regular intervals to check IOC for any
+ * fault conditions which will trigger the dead_ioc thread to
+ * deallocate pci resource, resulting deleting the IOC netry from list,
+ * this deletion need to protected by spinlock to enusre that
+ * ioc removal is syncrhonized, if not synchronized it might lead to
+ * list_del corruption as the ioc list is traversed in cli path.
+ */
+extern spinlock_t gioc_lock;
+
 void mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc);
 void mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc);
 
@@ -1090,10 +1264,14 @@ struct _sas_node *mpt3sas_scsih_expander_find_by_handle(
 	struct MPT3SAS_ADAPTER *ioc, u16 handle);
 struct _sas_node *mpt3sas_scsih_expander_find_by_sas_address(
 	struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
-struct _sas_device *mpt3sas_scsih_sas_device_find_by_sas_address(
-	struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
+struct _sas_device *mpt3sas_get_sdev_by_addr(
+	 struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
+struct _sas_device *__mpt3sas_get_sdev_by_addr(
+	 struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
 
 void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc);
+struct _raid_device *
+mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle);
 
 /* config shared API */
 u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
@@ -1133,6 +1311,8 @@ int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
 	u16 sz);
 int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
 int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
 int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
@@ -1177,8 +1357,8 @@ int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc,
 /* ctl shared API */
 extern struct device_attribute *mpt3sas_host_attrs[];
 extern struct device_attribute *mpt3sas_dev_attrs[];
-void mpt3sas_ctl_init(void);
-void mpt3sas_ctl_exit(void);
+void mpt3sas_ctl_init(ushort hbas_to_enumerate);
+void mpt3sas_ctl_exit(ushort hbas_to_enumerate);
 u8 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 	u32 reply);
 void mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase);
@@ -1193,6 +1373,7 @@ int mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
 	u8 *issue_reset);
 
 /* transport shared API */
+extern struct scsi_transport_template *mpt3sas_transport_template;
 u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 	u32 reply);
 struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc,
@@ -1224,4 +1405,18 @@ void mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key,
 	u8 asc, u8 ascq);
 void mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status,
 	u32 loginfo);
+
+/* warpdrive APIs */
+u8 mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device);
+u8
+mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void
+mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
+void
+mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+	u16 smid);
+
 #endif /* MPT3SAS_BASE_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index e45c4613e..a6914ec99 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -83,7 +83,6 @@ struct config_request {
 	dma_addr_t		page_dma;
 };
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 /**
  * _config_display_some_debug - debug routine
  * @ioc: per adapter object
@@ -173,7 +172,6 @@ _config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
 		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
 		    le32_to_cpu(mpi_reply->IOCLogInfo));
 }
-#endif
 
 /**
  * _config_alloc_config_dma_memory - obtain physical memory
@@ -255,9 +253,7 @@ mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 		    mpi_reply->MsgLength*4);
 	}
 	ioc->config_cmds.status &= ~MPT3_CMD_PENDING;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 	_config_display_some_debug(ioc, smid, "config_done", mpi_reply);
-#endif
 	ioc->config_cmds.smid = USHRT_MAX;
 	complete(&ioc->config_cmds.done);
 	return 1;
@@ -387,9 +383,7 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	config_request = mpt3sas_base_get_msg_frame(ioc, smid);
 	ioc->config_cmds.smid = smid;
 	memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 	_config_display_some_debug(ioc, smid, "config_request", NULL);
-#endif
 	init_completion(&ioc->config_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
 	timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
@@ -872,6 +866,42 @@ mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
 }
 
 /**
+ * mpt3sas_config_get_iounit_pg3 - obtain iounit page 3
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+	mpi_request.Header.PageNumber = 3;
+	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE3_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+	return r;
+}
+
+/**
  * mpt3sas_config_get_iounit_pg8 - obtain iounit page 8
  * @ioc: per adapter object
  * @mpi_reply: reply mf payload returned from firmware
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 080c8a76d..d8366b056 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -78,7 +78,6 @@ enum block_state {
 	BLOCKING,
 };
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 /**
  * _ctl_sas_device_find_by_handle - sas device search
  * @ioc: per adapter object
@@ -254,8 +253,6 @@ _ctl_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
 	}
 }
 
-#endif
-
 /**
  * mpt3sas_ctl_done - ctl module completion routine
  * @ioc: per adapter object
@@ -302,9 +299,7 @@ mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 			}
 		}
 	}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 	_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
-#endif
 	ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING;
 	complete(&ioc->ctl_cmds.done);
 	return 1;
@@ -414,20 +409,31 @@ mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
  * _ctl_verify_adapter - validates ioc_number passed from application
  * @ioc: per adapter object
  * @iocpp: The ioc pointer is returned in this.
+ * @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
+ *		MPI25_VERSION for mpt3ctl ioctl device.
  *
  * Return (-1) means error, else ioc_number.
  */
 static int
-_ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp)
+_ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp,
+							int mpi_version)
 {
 	struct MPT3SAS_ADAPTER *ioc;
-
+	/* global ioc lock to protect controller on list operations */
+	spin_lock(&gioc_lock);
 	list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
 		if (ioc->id != ioc_number)
 			continue;
+		/* Check whether this ioctl command is from right
+		 * ioctl device or not, if not continue the search.
+		 */
+		if (ioc->hba_mpi_version_belonged != mpi_version)
+			continue;
+		spin_unlock(&gioc_lock);
 		*iocpp = ioc;
 		return ioc_number;
 	}
+	spin_unlock(&gioc_lock);
 	*iocpp = NULL;
 	return -1;
 }
@@ -497,7 +503,7 @@ mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
  *
  * Called when application request fasyn callback handler.
  */
-static int
+int
 _ctl_fasync(int fd, struct file *filep, int mode)
 {
 	return fasync_helper(fd, filep, mode, &async_queue);
@@ -509,17 +515,22 @@ _ctl_fasync(int fd, struct file *filep, int mode)
  * @wait -
  *
  */
-static unsigned int
+unsigned int
 _ctl_poll(struct file *filep, poll_table *wait)
 {
 	struct MPT3SAS_ADAPTER *ioc;
 
 	poll_wait(filep, &ctl_poll_wait, wait);
 
+	/* global ioc lock to protect controller on list operations */
+	spin_lock(&gioc_lock);
 	list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
-		if (ioc->aen_event_read_flag)
+		if (ioc->aen_event_read_flag) {
+			spin_unlock(&gioc_lock);
 			return POLLIN | POLLRDNORM;
+		}
 	}
+	spin_unlock(&gioc_lock);
 	return 0;
 }
 
@@ -759,9 +770,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 	psge = (void *)request + (karg.data_sge_offset*4);
 
 	/* send command to firmware */
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 	_ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
-#endif
 
 	init_completion(&ioc->ctl_cmds.done);
 	switch (mpi_request->Function) {
@@ -916,7 +925,6 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 	mpi_reply = ioc->ctl_cmds.reply;
 	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 	if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
 	    (ioc->logging_level & MPT_DEBUG_TM)) {
 		Mpi2SCSITaskManagementReply_t *tm_reply =
@@ -929,7 +937,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 		    le32_to_cpu(tm_reply->IOCLogInfo),
 		    le32_to_cpu(tm_reply->TerminationCount));
 	}
-#endif
+
 	/* copy out xdata to user */
 	if (data_in_sz) {
 		if (copy_to_user(karg.data_in_buf_ptr, data_in,
@@ -1023,7 +1031,6 @@ _ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 	    __func__));
 
 	memset(&karg, 0 , sizeof(karg));
-	karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS3;
 	if (ioc->pfacts)
 		karg.port_number = ioc->pfacts[0].PortNumber;
 	karg.hw_rev = ioc->pdev->revision;
@@ -1035,9 +1042,21 @@ _ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 	karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
 	karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
 	karg.firmware_version = ioc->facts.FWVersion.Word;
-	strcpy(karg.driver_version, MPT3SAS_DRIVER_NAME);
+	strcpy(karg.driver_version, ioc->driver_name);
 	strcat(karg.driver_version, "-");
-	strcat(karg.driver_version, MPT3SAS_DRIVER_VERSION);
+	switch  (ioc->hba_mpi_version_belonged) {
+	case MPI2_VERSION:
+		if (ioc->is_warpdrive)
+			karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
+		else
+			karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
+		strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
+		break;
+	case MPI25_VERSION:
+		karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS3;
+		strcat(karg.driver_version, MPT3SAS_DRIVER_VERSION);
+		break;
+	}
 	karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
 
 	if (copy_to_user(arg, &karg, sizeof(karg))) {
@@ -2181,12 +2200,14 @@ _ctl_compat_mpt_command(struct MPT3SAS_ADAPTER *ioc, unsigned cmd,
  * _ctl_ioctl_main - main ioctl entry point
  * @file - (struct file)
  * @cmd - ioctl opcode
- * @arg -
- * compat - handles 32 bit applications in 64bit os
+ * @arg - user space data buffer
+ * @compat - handles 32 bit applications in 64bit os
+ * @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
+ *		MPI25_VERSION for mpt3ctl ioctl device.
  */
 static long
 _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
-	u8 compat)
+	u8 compat, u16 mpi_version)
 {
 	struct MPT3SAS_ADAPTER *ioc;
 	struct mpt3_ioctl_header ioctl_header;
@@ -2201,19 +2222,29 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
 		return -EFAULT;
 	}
 
-	if (_ctl_verify_adapter(ioctl_header.ioc_number, &ioc) == -1 || !ioc)
+	if (_ctl_verify_adapter(ioctl_header.ioc_number,
+				&ioc, mpi_version) == -1 || !ioc)
 		return -ENODEV;
 
+	/* pci_access_mutex lock acquired by ioctl path */
+	mutex_lock(&ioc->pci_access_mutex);
+
 	if (ioc->shost_recovery || ioc->pci_error_recovery ||
-	    ioc->is_driver_loading)
-		return -EAGAIN;
+	    ioc->is_driver_loading || ioc->remove_host) {
+		ret = -EAGAIN;
+		goto out_unlock_pciaccess;
+	}
 
 	state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
 	if (state == NON_BLOCKING) {
-		if (!mutex_trylock(&ioc->ctl_cmds.mutex))
-			return -EAGAIN;
-	} else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
-		return -ERESTARTSYS;
+		if (!mutex_trylock(&ioc->ctl_cmds.mutex)) {
+			ret = -EAGAIN;
+			goto out_unlock_pciaccess;
+		}
+	} else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) {
+		ret = -ERESTARTSYS;
+		goto out_unlock_pciaccess;
+	}
 
 
 	switch (cmd) {
@@ -2294,39 +2325,78 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
 	}
 
 	mutex_unlock(&ioc->ctl_cmds.mutex);
+out_unlock_pciaccess:
+	mutex_unlock(&ioc->pci_access_mutex);
 	return ret;
 }
 
 /**
- * _ctl_ioctl - main ioctl entry point (unlocked)
+ * _ctl_ioctl - mpt3ctl main ioctl entry point (unlocked)
  * @file - (struct file)
  * @cmd - ioctl opcode
  * @arg -
  */
-static long
+long
 _ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	long ret;
 
-	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0);
+	/* pass MPI25_VERSION value, to indicate that this ioctl cmd
+	 * came from mpt3ctl ioctl device.
+	 */
+	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0, MPI25_VERSION);
 	return ret;
 }
 
+/**
+ * _ctl_mpt2_ioctl - mpt2ctl main ioctl entry point (unlocked)
+ * @file - (struct file)
+ * @cmd - ioctl opcode
+ * @arg -
+ */
+long
+_ctl_mpt2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	long ret;
+
+	/* pass MPI2_VERSION value, to indicate that this ioctl cmd
+	 * came from mpt2ctl ioctl device.
+	 */
+	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0, MPI2_VERSION);
+	return ret;
+}
 #ifdef CONFIG_COMPAT
 /**
- * _ctl_ioctl_compat - main ioctl entry point (compat)
+ *_ ctl_ioctl_compat - main ioctl entry point (compat)
  * @file -
  * @cmd -
  * @arg -
  *
  * This routine handles 32 bit applications in 64bit os.
  */
-static long
+long
 _ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
 {
 	long ret;
 
-	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1);
+	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1, MPI25_VERSION);
+	return ret;
+}
+
+/**
+ *_ ctl_mpt2_ioctl_compat - main ioctl entry point (compat)
+ * @file -
+ * @cmd -
+ * @arg -
+ *
+ * This routine handles 32 bit applications in 64bit os.
+ */
+long
+_ctl_mpt2_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
+{
+	long ret;
+
+	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1, MPI2_VERSION);
 	return ret;
 }
 #endif
@@ -2713,6 +2783,82 @@ _ctl_ioc_reply_queue_count_show(struct device *cdev,
 static DEVICE_ATTR(reply_queue_count, S_IRUGO, _ctl_ioc_reply_queue_count_show,
 	NULL);
 
+/**
+ * _ctl_BRM_status_show - Backup Rail Monitor Status
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is number of reply queues
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_BRM_status_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	Mpi2IOUnitPage3_t *io_unit_pg3 = NULL;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 backup_rail_monitor_status = 0;
+	u16 ioc_status;
+	int sz;
+	ssize_t rc = 0;
+
+	if (!ioc->is_warpdrive) {
+		pr_err(MPT3SAS_FMT "%s: BRM attribute is only for"
+		    " warpdrive\n", ioc->name, __func__);
+		goto out;
+	}
+	/* pci_access_mutex lock acquired by sysfs show path */
+	mutex_lock(&ioc->pci_access_mutex);
+	if (ioc->pci_error_recovery || ioc->remove_host) {
+		mutex_unlock(&ioc->pci_access_mutex);
+		return 0;
+	}
+
+	/* allocate upto GPIOVal 36 entries */
+	sz = offsetof(Mpi2IOUnitPage3_t, GPIOVal) + (sizeof(u16) * 36);
+	io_unit_pg3 = kzalloc(sz, GFP_KERNEL);
+	if (!io_unit_pg3) {
+		pr_err(MPT3SAS_FMT "%s: failed allocating memory "
+		    "for iounit_pg3: (%d) bytes\n", ioc->name, __func__, sz);
+		goto out;
+	}
+
+	if (mpt3sas_config_get_iounit_pg3(ioc, &mpi_reply, io_unit_pg3, sz) !=
+	    0) {
+		pr_err(MPT3SAS_FMT
+		    "%s: failed reading iounit_pg3\n", ioc->name,
+		    __func__);
+		goto out;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "%s: iounit_pg3 failed with "
+		    "ioc_status(0x%04x)\n", ioc->name, __func__, ioc_status);
+		goto out;
+	}
+
+	if (io_unit_pg3->GPIOCount < 25) {
+		pr_err(MPT3SAS_FMT "%s: iounit_pg3->GPIOCount less than "
+		     "25 entries, detected (%d) entries\n", ioc->name, __func__,
+		    io_unit_pg3->GPIOCount);
+		goto out;
+	}
+
+	/* BRM status is in bit zero of GPIOVal[24] */
+	backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
+	rc = snprintf(buf, PAGE_SIZE, "%d\n", (backup_rail_monitor_status & 1));
+
+ out:
+	kfree(io_unit_pg3);
+	mutex_unlock(&ioc->pci_access_mutex);
+	return rc;
+}
+static DEVICE_ATTR(BRM_status, S_IRUGO, _ctl_BRM_status_show, NULL);
+
 struct DIAG_BUFFER_START {
 	__le32	Size;
 	__le32	DiagVersion;
@@ -3165,6 +3311,7 @@ struct device_attribute *mpt3sas_host_attrs[] = {
 	&dev_attr_diag_trigger_event,
 	&dev_attr_diag_trigger_scsi,
 	&dev_attr_diag_trigger_mpi,
+	&dev_attr_BRM_status,
 	NULL,
 };
 
@@ -3218,6 +3365,7 @@ struct device_attribute *mpt3sas_dev_attrs[] = {
 	NULL,
 };
 
+/* file operations table for mpt3ctl device */
 static const struct file_operations ctl_fops = {
 	.owner = THIS_MODULE,
 	.unlocked_ioctl = _ctl_ioctl,
@@ -3228,23 +3376,53 @@ static const struct file_operations ctl_fops = {
 #endif
 };
 
+/* file operations table for mpt2ctl device */
+static const struct file_operations ctl_gen2_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = _ctl_mpt2_ioctl,
+	.poll = _ctl_poll,
+	.fasync = _ctl_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = _ctl_mpt2_ioctl_compat,
+#endif
+};
+
 static struct miscdevice ctl_dev = {
 	.minor  = MPT3SAS_MINOR,
 	.name   = MPT3SAS_DEV_NAME,
 	.fops   = &ctl_fops,
 };
 
+static struct miscdevice gen2_ctl_dev = {
+	.minor  = MPT2SAS_MINOR,
+	.name   = MPT2SAS_DEV_NAME,
+	.fops   = &ctl_gen2_fops,
+};
+
 /**
  * mpt3sas_ctl_init - main entry point for ctl.
  *
  */
 void
-mpt3sas_ctl_init(void)
+mpt3sas_ctl_init(ushort hbas_to_enumerate)
 {
 	async_queue = NULL;
-	if (misc_register(&ctl_dev) < 0)
-		pr_err("%s can't register misc device [minor=%d]\n",
-		    MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR);
+
+	/* Don't register mpt3ctl ioctl device if
+	 * hbas_to_enumarate is one.
+	 */
+	if (hbas_to_enumerate != 1)
+		if (misc_register(&ctl_dev) < 0)
+			pr_err("%s can't register misc device [minor=%d]\n",
+			    MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR);
+
+	/* Don't register mpt3ctl ioctl device if
+	 * hbas_to_enumarate is two.
+	 */
+	if (hbas_to_enumerate != 2)
+		if (misc_register(&gen2_ctl_dev) < 0)
+			pr_err("%s can't register misc device [minor=%d]\n",
+			    MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
 
 	init_waitqueue_head(&ctl_poll_wait);
 }
@@ -3254,7 +3432,7 @@ mpt3sas_ctl_init(void)
  *
  */
 void
-mpt3sas_ctl_exit(void)
+mpt3sas_ctl_exit(ushort hbas_to_enumerate)
 {
 	struct MPT3SAS_ADAPTER *ioc;
 	int i;
@@ -3279,5 +3457,8 @@ mpt3sas_ctl_exit(void)
 
 		kfree(ioc->event_log);
 	}
-	misc_deregister(&ctl_dev);
+	if (hbas_to_enumerate != 1)
+		misc_deregister(&ctl_dev);
+	if (hbas_to_enumerate != 2)
+		misc_deregister(&gen2_ctl_dev);
 }
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
index aee99ce67..89408356d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
@@ -50,10 +50,13 @@
 #include <linux/miscdevice.h>
 #endif
 
-
+#ifndef MPT2SAS_MINOR
+#define MPT2SAS_MINOR		(MPT_MINOR + 1)
+#endif
 #ifndef MPT3SAS_MINOR
 #define MPT3SAS_MINOR		(MPT_MINOR + 2)
 #endif
+#define MPT2SAS_DEV_NAME	"mpt2ctl"
 #define MPT3SAS_DEV_NAME	"mpt3ctl"
 #define MPT3_MAGIC_NUMBER	'L'
 #define MPT3_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
@@ -138,6 +141,7 @@ struct mpt3_ioctl_pci_info {
 #define MPT2_IOCTL_INTERFACE_FC_IP	(0x02)
 #define MPT2_IOCTL_INTERFACE_SAS	(0x03)
 #define MPT2_IOCTL_INTERFACE_SAS2	(0x04)
+#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200	(0x05)
 #define MPT3_IOCTL_INTERFACE_SAS3	(0x06)
 #define MPT2_IOCTL_VERSION_LENGTH	(32)
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_debug.h b/drivers/scsi/mpt3sas/mpt3sas_debug.h
index 4e8a63fdb..cceeb2c16 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_debug.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_debug.h
@@ -68,20 +68,11 @@
 #define MPT_DEBUG_TRIGGER_DIAG		0x00200000
 
 
-/*
- * CONFIG_SCSI_MPT3SAS_LOGGING - enabled in Kconfig
- */
-
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 #define MPT_CHECK_LOGGING(IOC, CMD, BITS)			\
 {								\
 	if (IOC->logging_level & BITS)				\
 		CMD;						\
 }
-#else
-#define MPT_CHECK_LOGGING(IOC, CMD, BITS)
-#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */
-
 
 /*
  * debug macros
@@ -153,7 +144,7 @@
 
 
 /* inline functions for dumping debug data*/
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
 /**
  * _debug_dump_mf - print message frame contents
  * @mpi_request: pointer to message frame
@@ -211,10 +202,5 @@ _debug_dump_config(void *mpi_request, int sz)
 	}
 	pr_info("\n");
 }
-#else
-#define _debug_dump_mf(mpi_request, sz)
-#define _debug_dump_reply(mpi_request, sz)
-#define _debug_dump_config(mpi_request, sz)
-#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */
 
 #endif /* MPT3SAS_DEBUG_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 8ccef3852..9ab77b064 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -54,14 +54,10 @@
 #include <linux/interrupt.h>
 #include <linux/aer.h>
 #include <linux/raid_class.h>
+#include <asm/unaligned.h>
 
 #include "mpt3sas_base.h"
 
-MODULE_AUTHOR(MPT3SAS_AUTHOR);
-MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION);
-MODULE_LICENSE("GPL");
-MODULE_VERSION(MPT3SAS_DRIVER_VERSION);
-
 #define RAID_CHANNEL 1
 /* forward proto's */
 static void _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
@@ -75,11 +71,16 @@ static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 
 static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid);
 
-static void _scsih_scan_start(struct Scsi_Host *shost);
-static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time);
-
 /* global parameters */
 LIST_HEAD(mpt3sas_ioc_list);
+/* global ioc lock for list operations */
+DEFINE_SPINLOCK(gioc_lock);
+
+MODULE_AUTHOR(MPT3SAS_AUTHOR);
+MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(MPT3SAS_DRIVER_VERSION);
+MODULE_ALIAS("mpt2sas");
 
 /* local parameters */
 static u8 scsi_io_cb_idx = -1;
@@ -90,7 +91,8 @@ static u8 port_enable_cb_idx = -1;
 static u8 transport_cb_idx = -1;
 static u8 scsih_cb_idx = -1;
 static u8 config_cb_idx = -1;
-static int mpt_ids;
+static int mpt2_ids;
+static int mpt3_ids;
 
 static u8 tm_tr_cb_idx = -1 ;
 static u8 tm_tr_volume_cb_idx = -1 ;
@@ -117,8 +119,12 @@ static u64 max_lun = MPT3SAS_MAX_LUN;
 module_param(max_lun, ullong, 0);
 MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
 
-
-
+static ushort hbas_to_enumerate;
+module_param(hbas_to_enumerate, ushort, 0);
+MODULE_PARM_DESC(hbas_to_enumerate,
+		" 0 - enumerates both SAS 2.0 & SAS 3.0 generation HBAs\n \
+		  1 - enumerates only SAS 2.0 generation HBAs\n \
+		  2 - enumerates only SAS 3.0 generation HBAs (default=0)");
 
 /* diag_buffer_enable is bitwise
  * bit 0 set = TRACE
@@ -143,8 +149,8 @@ MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=7 ");
 
 
 /* raid transport support */
-
-static struct raid_template *mpt3sas_raid_template;
+struct raid_template *mpt3sas_raid_template;
+struct raid_template *mpt2sas_raid_template;
 
 
 /**
@@ -191,11 +197,36 @@ struct fw_event_work {
 	u8			VP_ID;
 	u8			ignore;
 	u16			event;
+	struct kref		refcount;
 	char			event_data[0] __aligned(4);
 };
 
-/* raid transport support */
-static struct raid_template *mpt3sas_raid_template;
+static void fw_event_work_free(struct kref *r)
+{
+	kfree(container_of(r, struct fw_event_work, refcount));
+}
+
+static void fw_event_work_get(struct fw_event_work *fw_work)
+{
+	kref_get(&fw_work->refcount);
+}
+
+static void fw_event_work_put(struct fw_event_work *fw_work)
+{
+	kref_put(&fw_work->refcount, fw_event_work_free);
+}
+
+static struct fw_event_work *alloc_fw_event_work(int len)
+{
+	struct fw_event_work *fw_event;
+
+	fw_event = kzalloc(sizeof(*fw_event) + len, GFP_ATOMIC);
+	if (!fw_event)
+		return NULL;
+
+	kref_init(&fw_event->refcount);
+	return fw_event;
+}
 
 /**
  * struct _scsi_io_transfer - scsi io transfer
@@ -245,28 +276,6 @@ struct _scsi_io_transfer {
 	u32	transfer_length;
 };
 
-/*
- * The pci device ids are defined in mpi/mpi2_cnfg.h.
- */
-static const struct pci_device_id scsih_pci_table[] = {
-	/* Fury ~ 3004 and 3008 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Invader ~ 3108 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{0}	/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(pci, scsih_pci_table);
-
 /**
  * _scsih_set_debug_level - global setting of ioc->logging_level.
  *
@@ -282,8 +291,10 @@ _scsih_set_debug_level(const char *val, struct kernel_param *kp)
 		return ret;
 
 	pr_info("setting logging_level(0x%08x)\n", logging_level);
+	spin_lock(&gioc_lock);
 	list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
 		ioc->logging_level = logging_level;
+	spin_unlock(&gioc_lock);
 	return 0;
 }
 module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
@@ -518,8 +529,61 @@ _scsih_determine_boot_device(struct MPT3SAS_ADAPTER *ioc,
 	}
 }
 
+static struct _sas_device *
+__mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+		struct MPT3SAS_TARGET *tgt_priv)
+{
+	struct _sas_device *ret;
+
+	assert_spin_locked(&ioc->sas_device_lock);
+
+	ret = tgt_priv->sdev;
+	if (ret)
+		sas_device_get(ret);
+
+	return ret;
+}
+
+static struct _sas_device *
+mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+		struct MPT3SAS_TARGET *tgt_priv)
+{
+	struct _sas_device *ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	ret = __mpt3sas_get_sdev_from_target(ioc, tgt_priv);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return ret;
+}
+
+
+struct _sas_device *
+__mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc,
+					u64 sas_address)
+{
+	struct _sas_device *sas_device;
+
+	assert_spin_locked(&ioc->sas_device_lock);
+
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list)
+		if (sas_device->sas_address == sas_address)
+			goto found_device;
+
+	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
+		if (sas_device->sas_address == sas_address)
+			goto found_device;
+
+	return NULL;
+
+found_device:
+	sas_device_get(sas_device);
+	return sas_device;
+}
+
 /**
- * mpt3sas_scsih_sas_device_find_by_sas_address - sas device search
+ * mpt3sas_get_sdev_by_addr - sas device search
  * @ioc: per adapter object
  * @sas_address: sas address
  * Context: Calling function should acquire ioc->sas_device_lock
@@ -528,24 +592,44 @@ _scsih_determine_boot_device(struct MPT3SAS_ADAPTER *ioc,
  * object.
  */
 struct _sas_device *
-mpt3sas_scsih_sas_device_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc,
 	u64 sas_address)
 {
 	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+			sas_address);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return sas_device;
+}
+
+static struct _sas_device *
+__mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_device *sas_device;
+
+	assert_spin_locked(&ioc->sas_device_lock);
 
 	list_for_each_entry(sas_device, &ioc->sas_device_list, list)
-		if (sas_device->sas_address == sas_address)
-			return sas_device;
+		if (sas_device->handle == handle)
+			goto found_device;
 
 	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
-		if (sas_device->sas_address == sas_address)
-			return sas_device;
+		if (sas_device->handle == handle)
+			goto found_device;
 
 	return NULL;
+
+found_device:
+	sas_device_get(sas_device);
+	return sas_device;
 }
 
 /**
- * _scsih_sas_device_find_by_handle - sas device search
+ * mpt3sas_get_sdev_by_handle - sas device search
  * @ioc: per adapter object
  * @handle: sas device handle (assigned by firmware)
  * Context: Calling function should acquire ioc->sas_device_lock
@@ -554,19 +638,16 @@ mpt3sas_scsih_sas_device_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
  * object.
  */
 static struct _sas_device *
-_scsih_sas_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 {
 	struct _sas_device *sas_device;
+	unsigned long flags;
 
-	list_for_each_entry(sas_device, &ioc->sas_device_list, list)
-		if (sas_device->handle == handle)
-			return sas_device;
-
-	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
-		if (sas_device->handle == handle)
-			return sas_device;
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
-	return NULL;
+	return sas_device;
 }
 
 /**
@@ -575,7 +656,7 @@ _scsih_sas_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
  * @sas_device: the sas_device object
  * Context: This function will acquire ioc->sas_device_lock.
  *
- * Removing object and freeing associated memory from the ioc->sas_device_list.
+ * If sas_device is on the list, remove it and decrement its reference count.
  */
 static void
 _scsih_sas_device_remove(struct MPT3SAS_ADAPTER *ioc,
@@ -602,9 +683,15 @@ _scsih_sas_device_remove(struct MPT3SAS_ADAPTER *ioc,
 		   ioc->name, sas_device->enclosure_level,
 		   sas_device->connector_name);
 
+	/*
+	 * The lock serializes access to the list, but we still need to verify
+	 * that nobody removed the entry while we were waiting on the lock.
+	 */
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	list_del(&sas_device->list);
-	kfree(sas_device);
+	if (!list_empty(&sas_device->list)) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 }
 
@@ -625,12 +712,16 @@ _scsih_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 		return;
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
-	if (sas_device)
-		list_del(&sas_device->list);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (sas_device) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	if (sas_device)
+	if (sas_device) {
 		_scsih_remove_device(ioc, sas_device);
+		sas_device_put(sas_device);
+	}
 }
 
 /**
@@ -651,13 +742,16 @@ mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
 		return;
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
-	    sas_address);
-	if (sas_device)
-		list_del(&sas_device->list);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc, sas_address);
+	if (sas_device) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	if (sas_device)
+	if (sas_device) {
 		_scsih_remove_device(ioc, sas_device);
+		sas_device_put(sas_device);
+	}
 }
 
 /**
@@ -692,6 +786,7 @@ _scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc,
 		    sas_device->enclosure_level, sas_device->connector_name));
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device_get(sas_device);
 	list_add_tail(&sas_device->list, &ioc->sas_device_list);
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
@@ -745,6 +840,7 @@ _scsih_sas_device_init_add(struct MPT3SAS_ADAPTER *ioc,
 		    sas_device->connector_name));
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device_get(sas_device);
 	list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
 	_scsih_determine_boot_device(ioc, sas_device, 0);
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
@@ -778,7 +874,7 @@ _scsih_raid_device_find_by_id(struct MPT3SAS_ADAPTER *ioc, int id, int channel)
 }
 
 /**
- * _scsih_raid_device_find_by_handle - raid device search
+ * mpt3sas_raid_device_find_by_handle - raid device search
  * @ioc: per adapter object
  * @handle: sas device handle (assigned by firmware)
  * Context: Calling function should acquire ioc->raid_device_lock
@@ -786,8 +882,8 @@ _scsih_raid_device_find_by_id(struct MPT3SAS_ADAPTER *ioc, int id, int channel)
  * This searches for raid_device based on handle, then return raid_device
  * object.
  */
-static struct _raid_device *
-_scsih_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+struct _raid_device *
+mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 {
 	struct _raid_device *raid_device, *r;
 
@@ -1095,14 +1191,14 @@ _scsih_scsi_lookup_find_by_lun(struct MPT3SAS_ADAPTER *ioc, int id,
 }
 
 /**
- * _scsih_change_queue_depth - setting device queue depth
+ * scsih_change_queue_depth - setting device queue depth
  * @sdev: scsi device struct
  * @qdepth: requested queue depth
  *
  * Returns queue depth.
  */
-static int
-_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+int
+scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 {
 	struct Scsi_Host *shost = sdev->host;
 	int max_depth;
@@ -1123,12 +1219,15 @@ _scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 		goto not_sata;
 	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
 		goto not_sata;
+
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
-	   sas_device_priv_data->sas_target->sas_address);
-	if (sas_device && sas_device->device_info &
-	    MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
-		max_depth = MPT3SAS_SATA_QUEUE_DEPTH;
+	sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
+	if (sas_device) {
+		if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+			max_depth = MPT3SAS_SATA_QUEUE_DEPTH;
+
+		sas_device_put(sas_device);
+	}
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
  not_sata:
@@ -1141,14 +1240,14 @@ _scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 }
 
 /**
- * _scsih_target_alloc - target add routine
+ * scsih_target_alloc - target add routine
  * @starget: scsi target struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
-static int
-_scsih_target_alloc(struct scsi_target *starget)
+int
+scsih_target_alloc(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1176,7 +1275,9 @@ _scsih_target_alloc(struct scsi_target *starget)
 			sas_target_priv_data->handle = raid_device->handle;
 			sas_target_priv_data->sas_address = raid_device->wwid;
 			sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
-			raid_device->starget = starget;
+			sas_target_priv_data->raid_device = raid_device;
+			if (ioc->is_warpdrive)
+				raid_device->starget = starget;
 		}
 		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
 		return 0;
@@ -1185,12 +1286,13 @@ _scsih_target_alloc(struct scsi_target *starget)
 	/* sas/sata devices */
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	rphy = dev_to_rphy(starget->dev.parent);
-	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
 	   rphy->identify.sas_address);
 
 	if (sas_device) {
 		sas_target_priv_data->handle = sas_device->handle;
 		sas_target_priv_data->sas_address = sas_device->sas_address;
+		sas_target_priv_data->sdev = sas_device;
 		sas_device->starget = starget;
 		sas_device->id = starget->id;
 		sas_device->channel = starget->channel;
@@ -1206,13 +1308,13 @@ _scsih_target_alloc(struct scsi_target *starget)
 }
 
 /**
- * _scsih_target_destroy - target destroy routine
+ * scsih_target_destroy - target destroy routine
  * @starget: scsi target struct
  *
  * Returns nothing.
  */
-static void
-_scsih_target_destroy(struct scsi_target *starget)
+void
+scsih_target_destroy(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1240,13 +1342,21 @@ _scsih_target_destroy(struct scsi_target *starget)
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	rphy = dev_to_rphy(starget->dev.parent);
-	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
-	   rphy->identify.sas_address);
+	sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
 	if (sas_device && (sas_device->starget == starget) &&
 	    (sas_device->id == starget->id) &&
 	    (sas_device->channel == starget->channel))
 		sas_device->starget = NULL;
 
+	if (sas_device) {
+		/*
+		 * Corresponding get() is in _scsih_target_alloc()
+		 */
+		sas_target_priv_data->sdev = NULL;
+		sas_device_put(sas_device);
+
+		sas_device_put(sas_device);
+	}
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
  out:
@@ -1255,14 +1365,14 @@ _scsih_target_destroy(struct scsi_target *starget)
 }
 
 /**
- * _scsih_slave_alloc - device add routine
+ * scsih_slave_alloc - device add routine
  * @sdev: scsi device struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
-static int
-_scsih_slave_alloc(struct scsi_device *sdev)
+int
+scsih_slave_alloc(struct scsi_device *sdev)
 {
 	struct Scsi_Host *shost;
 	struct MPT3SAS_ADAPTER *ioc;
@@ -1302,14 +1412,18 @@ _scsih_slave_alloc(struct scsi_device *sdev)
 
 	if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
 		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+		sas_device = __mpt3sas_get_sdev_by_addr(ioc,
 					sas_target_priv_data->sas_address);
 		if (sas_device && (sas_device->starget == NULL)) {
 			sdev_printk(KERN_INFO, sdev,
 			"%s : sas_device->starget set to starget @ %d\n",
-				__func__, __LINE__);
+			     __func__, __LINE__);
 			sas_device->starget = starget;
 		}
+
+		if (sas_device)
+			sas_device_put(sas_device);
+
 		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	}
 
@@ -1317,13 +1431,13 @@ _scsih_slave_alloc(struct scsi_device *sdev)
 }
 
 /**
- * _scsih_slave_destroy - device destroy routine
+ * scsih_slave_destroy - device destroy routine
  * @sdev: scsi device struct
  *
  * Returns nothing.
  */
-static void
-_scsih_slave_destroy(struct scsi_device *sdev)
+void
+scsih_slave_destroy(struct scsi_device *sdev)
 {
 	struct MPT3SAS_TARGET *sas_target_priv_data;
 	struct scsi_target *starget;
@@ -1344,10 +1458,13 @@ _scsih_slave_destroy(struct scsi_device *sdev)
 
 	if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
 		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
-		   sas_target_priv_data->sas_address);
+		sas_device = __mpt3sas_get_sdev_from_target(ioc,
+				sas_target_priv_data);
 		if (sas_device && !sas_target_priv_data->num_luns)
 			sas_device->starget = NULL;
+
+		if (sas_device)
+			sas_device_put(sas_device);
 		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	}
 
@@ -1409,23 +1526,26 @@ _scsih_display_sata_capabilities(struct MPT3SAS_ADAPTER *ioc,
  */
 
 /**
- * _scsih_is_raid - return boolean indicating device is raid volume
+ * scsih_is_raid - return boolean indicating device is raid volume
  * @dev the device struct object
  */
-static int
-_scsih_is_raid(struct device *dev)
+int
+scsih_is_raid(struct device *dev)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
 
+	if (ioc->is_warpdrive)
+		return 0;
 	return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
 }
 
 /**
- * _scsih_get_resync - get raid volume resync percent complete
+ * scsih_get_resync - get raid volume resync percent complete
  * @dev the device struct object
  */
-static void
-_scsih_get_resync(struct device *dev)
+void
+scsih_get_resync(struct device *dev)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
@@ -1439,6 +1559,9 @@ _scsih_get_resync(struct device *dev)
 
 	percent_complete = 0;
 	handle = 0;
+	if (ioc->is_warpdrive)
+		goto out;
+
 	spin_lock_irqsave(&ioc->raid_device_lock, flags);
 	raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
 	    sdev->channel);
@@ -1466,15 +1589,18 @@ _scsih_get_resync(struct device *dev)
 		percent_complete = 0;
 
  out:
-	raid_set_resync(mpt3sas_raid_template, dev, percent_complete);
+	if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+		raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
+	if (ioc->hba_mpi_version_belonged == MPI25_VERSION)
+		raid_set_resync(mpt3sas_raid_template, dev, percent_complete);
 }
 
 /**
- * _scsih_get_state - get raid volume level
+ * scsih_get_state - get raid volume level
  * @dev the device struct object
  */
-static void
-_scsih_get_state(struct device *dev)
+void
+scsih_get_state(struct device *dev)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
@@ -1524,7 +1650,10 @@ _scsih_get_state(struct device *dev)
 		break;
 	}
  out:
-	raid_set_state(mpt3sas_raid_template, dev, state);
+	if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+		raid_set_state(mpt2sas_raid_template, dev, state);
+	if (ioc->hba_mpi_version_belonged == MPI25_VERSION)
+		raid_set_state(mpt3sas_raid_template, dev, state);
 }
 
 /**
@@ -1533,7 +1662,8 @@ _scsih_get_state(struct device *dev)
  * @volume_type: volume type
  */
 static void
-_scsih_set_level(struct scsi_device *sdev, u8 volume_type)
+_scsih_set_level(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_device *sdev, u8 volume_type)
 {
 	enum raid_level level = RAID_LEVEL_UNKNOWN;
 
@@ -1552,7 +1682,12 @@ _scsih_set_level(struct scsi_device *sdev, u8 volume_type)
 		break;
 	}
 
-	raid_set_level(mpt3sas_raid_template, &sdev->sdev_gendev, level);
+	if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+		raid_set_level(mpt2sas_raid_template,
+			       &sdev->sdev_gendev, level);
+	if (ioc->hba_mpi_version_belonged == MPI25_VERSION)
+		raid_set_level(mpt3sas_raid_template,
+			       &sdev->sdev_gendev, level);
 }
 
 
@@ -1622,8 +1757,6 @@ _scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc,
 	return 0;
 }
 
-
-
 /**
  * _scsih_enable_tlr - setting TLR flags
  * @ioc: per adapter object
@@ -1652,14 +1785,14 @@ _scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev)
 }
 
 /**
- * _scsih_slave_configure - device configure routine.
+ * scsih_slave_configure - device configure routine.
  * @sdev: scsi device struct
  *
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
-static int
-_scsih_slave_configure(struct scsi_device *sdev)
+int
+scsih_slave_configure(struct scsi_device *sdev)
 {
 	struct Scsi_Host *shost = sdev->host;
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1686,7 +1819,7 @@ _scsih_slave_configure(struct scsi_device *sdev)
 	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
 
 		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+		raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
 		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
 		if (!raid_device) {
 			dfailprintk(ioc, pr_warn(MPT3SAS_FMT
@@ -1702,6 +1835,10 @@ _scsih_slave_configure(struct scsi_device *sdev)
 			return 1;
 		}
 
+		/*
+		 * WARPDRIVE: Initialize the required data for Direct IO
+		 */
+		mpt3sas_init_warpdrive_properties(ioc, raid_device);
 
 		/* RAID Queue Depth Support
 		 * IS volume = underlying qdepth of drive type, either
@@ -1750,17 +1887,19 @@ _scsih_slave_configure(struct scsi_device *sdev)
 			break;
 		}
 
-		sdev_printk(KERN_INFO, sdev,
-			"%s: handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n",
-			 r_level, raid_device->handle,
-			 (unsigned long long)raid_device->wwid,
-			 raid_device->num_pds, ds);
-
+		if (!ioc->hide_ir_msg)
+			sdev_printk(KERN_INFO, sdev,
+			   "%s: handle(0x%04x), wwid(0x%016llx),"
+			    " pd_count(%d), type(%s)\n",
+			    r_level, raid_device->handle,
+			    (unsigned long long)raid_device->wwid,
+			    raid_device->num_pds, ds);
 
-		_scsih_change_queue_depth(sdev, qdepth);
+		scsih_change_queue_depth(sdev, qdepth);
 
-/* raid transport support */
-		_scsih_set_level(sdev, raid_device->volume_type);
+		/* raid transport support */
+		if (!ioc->is_warpdrive)
+			_scsih_set_level(ioc, sdev, raid_device->volume_type);
 		return 0;
 	}
 
@@ -1783,7 +1922,7 @@ _scsih_slave_configure(struct scsi_device *sdev)
 	}
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
 	   sas_device_priv_data->sas_target->sas_address);
 	if (!sas_device) {
 		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
@@ -1823,13 +1962,14 @@ _scsih_slave_configure(struct scsi_device *sdev)
 		     ds, sas_device->enclosure_level,
 		     sas_device->connector_name);
 
+	sas_device_put(sas_device);
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
 	if (!ssp_target)
 		_scsih_display_sata_capabilities(ioc, handle, sdev);
 
 
-	_scsih_change_queue_depth(sdev, qdepth);
+	scsih_change_queue_depth(sdev, qdepth);
 
 	if (ssp_target) {
 		sas_read_port_mode_page(sdev);
@@ -1840,7 +1980,7 @@ _scsih_slave_configure(struct scsi_device *sdev)
 }
 
 /**
- * _scsih_bios_param - fetch head, sector, cylinder info for a disk
+ * scsih_bios_param - fetch head, sector, cylinder info for a disk
  * @sdev: scsi device struct
  * @bdev: pointer to block device context
  * @capacity: device size (in 512 byte sectors)
@@ -1851,8 +1991,8 @@ _scsih_slave_configure(struct scsi_device *sdev)
  *
  * Return nothing.
  */
-static int
-_scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+int
+scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
 	sector_t capacity, int params[])
 {
 	int		heads;
@@ -2209,7 +2349,10 @@ _scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
 
 	if (!priv_target)
 		return;
-	device_str = "volume";
+	if (ioc->hide_ir_msg)
+		device_str = "WarpDrive";
+	else
+		device_str = "volume";
 
 	scsi_print_command(scmd);
 	if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
@@ -2219,8 +2362,7 @@ _scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
 		    device_str, (unsigned long long)priv_target->sas_address);
 	} else {
 		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
-		    priv_target->sas_address);
+		sas_device = __mpt3sas_get_sdev_from_target(ioc, priv_target);
 		if (sas_device) {
 			if (priv_target->flags &
 			    MPT_TARGET_FLAGS_RAID_COMPONENT) {
@@ -2246,19 +2388,21 @@ _scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
 				"enclosure level(0x%04x),connector name(%s)\n",
 				 sas_device->enclosure_level,
 				 sas_device->connector_name);
+
+			sas_device_put(sas_device);
 		}
 		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	}
 }
 
 /**
- * _scsih_abort - eh threads main abort routine
+ * scsih_abort - eh threads main abort routine
  * @scmd: pointer to scsi command object
  *
  * Returns SUCCESS if command aborted else FAILED
  */
-static int
-_scsih_abort(struct scsi_cmnd *scmd)
+int
+scsih_abort(struct scsi_cmnd *scmd)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT3SAS_DEVICE *sas_device_priv_data;
@@ -2311,21 +2455,23 @@ _scsih_abort(struct scsi_cmnd *scmd)
 }
 
 /**
- * _scsih_dev_reset - eh threads main device reset routine
+ * scsih_dev_reset - eh threads main device reset routine
  * @scmd: pointer to scsi command object
  *
  * Returns SUCCESS if command aborted else FAILED
  */
-static int
-_scsih_dev_reset(struct scsi_cmnd *scmd)
+int
+scsih_dev_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT3SAS_DEVICE *sas_device_priv_data;
-	struct _sas_device *sas_device;
-	unsigned long flags;
+	struct _sas_device *sas_device = NULL;
 	u16	handle;
 	int r;
 
+	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
+
 	sdev_printk(KERN_INFO, scmd->device,
 		"attempting device reset! scmd(%p)\n", scmd);
 	_scsih_tm_display_info(ioc, scmd);
@@ -2344,12 +2490,10 @@ _scsih_dev_reset(struct scsi_cmnd *scmd)
 	handle = 0;
 	if (sas_device_priv_data->sas_target->flags &
 	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = _scsih_sas_device_find_by_handle(ioc,
-		   sas_device_priv_data->sas_target->handle);
+		sas_device = mpt3sas_get_sdev_from_target(ioc,
+				target_priv_data);
 		if (sas_device)
 			handle = sas_device->volume_handle;
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	} else
 		handle = sas_device_priv_data->sas_target->handle;
 
@@ -2366,25 +2510,29 @@ _scsih_dev_reset(struct scsi_cmnd *scmd)
  out:
 	sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
 	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+	if (sas_device)
+		sas_device_put(sas_device);
+
 	return r;
 }
 
 /**
- * _scsih_target_reset - eh threads main target reset routine
+ * scsih_target_reset - eh threads main target reset routine
  * @scmd: pointer to scsi command object
  *
  * Returns SUCCESS if command aborted else FAILED
  */
-static int
-_scsih_target_reset(struct scsi_cmnd *scmd)
+int
+scsih_target_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT3SAS_DEVICE *sas_device_priv_data;
-	struct _sas_device *sas_device;
-	unsigned long flags;
+	struct _sas_device *sas_device = NULL;
 	u16	handle;
 	int r;
 	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
 
 	starget_printk(KERN_INFO, starget, "attempting target reset! scmd(%p)\n",
 		scmd);
@@ -2404,12 +2552,10 @@ _scsih_target_reset(struct scsi_cmnd *scmd)
 	handle = 0;
 	if (sas_device_priv_data->sas_target->flags &
 	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = _scsih_sas_device_find_by_handle(ioc,
-		   sas_device_priv_data->sas_target->handle);
+		sas_device = mpt3sas_get_sdev_from_target(ioc,
+				target_priv_data);
 		if (sas_device)
 			handle = sas_device->volume_handle;
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	} else
 		handle = sas_device_priv_data->sas_target->handle;
 
@@ -2426,18 +2572,22 @@ _scsih_target_reset(struct scsi_cmnd *scmd)
  out:
 	starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
 	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+	if (sas_device)
+		sas_device_put(sas_device);
+
 	return r;
 }
 
 
 /**
- * _scsih_host_reset - eh threads main host reset routine
+ * scsih_host_reset - eh threads main host reset routine
  * @scmd: pointer to scsi command object
  *
  * Returns SUCCESS if command aborted else FAILED
  */
-static int
-_scsih_host_reset(struct scsi_cmnd *scmd)
+int
+scsih_host_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	int r, retval;
@@ -2483,32 +2633,36 @@ _scsih_fw_event_add(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
 		return;
 
 	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	fw_event_work_get(fw_event);
 	INIT_LIST_HEAD(&fw_event->list);
 	list_add_tail(&fw_event->list, &ioc->fw_event_list);
 	INIT_WORK(&fw_event->work, _firmware_event_work);
+	fw_event_work_get(fw_event);
 	queue_work(ioc->firmware_event_thread, &fw_event->work);
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 }
 
 /**
- * _scsih_fw_event_free - delete fw_event
+ * _scsih_fw_event_del_from_list - delete fw_event from the list
  * @ioc: per adapter object
  * @fw_event: object describing the event
  * Context: This function will acquire ioc->fw_event_lock.
  *
- * This removes firmware event object from link list, frees associated memory.
+ * If the fw_event is on the fw_event_list, remove it and do a put.
  *
  * Return nothing.
  */
 static void
-_scsih_fw_event_free(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work
+_scsih_fw_event_del_from_list(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work
 	*fw_event)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&ioc->fw_event_lock, flags);
-	list_del(&fw_event->list);
-	kfree(fw_event);
+	if (!list_empty(&fw_event->list)) {
+		list_del_init(&fw_event->list);
+		fw_event_work_put(fw_event);
+	}
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 }
 
@@ -2525,17 +2679,19 @@ mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc,
 	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
 {
 	struct fw_event_work *fw_event;
+	u16 sz;
 
 	if (ioc->is_driver_loading)
 		return;
-	fw_event = kzalloc(sizeof(*fw_event) + sizeof(*event_data),
-			   GFP_ATOMIC);
+	sz = sizeof(*event_data);
+	fw_event = alloc_fw_event_work(sz);
 	if (!fw_event)
 		return;
 	fw_event->event = MPT3SAS_PROCESS_TRIGGER_DIAG;
 	fw_event->ioc = ioc;
 	memcpy(fw_event->event_data, event_data, sizeof(*event_data));
 	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
 }
 
 /**
@@ -2551,12 +2707,13 @@ _scsih_error_recovery_delete_devices(struct MPT3SAS_ADAPTER *ioc)
 
 	if (ioc->is_driver_loading)
 		return;
-	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+	fw_event = alloc_fw_event_work(0);
 	if (!fw_event)
 		return;
 	fw_event->event = MPT3SAS_REMOVE_UNRESPONDING_DEVICES;
 	fw_event->ioc = ioc;
 	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
 }
 
 /**
@@ -2570,12 +2727,29 @@ mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc)
 {
 	struct fw_event_work *fw_event;
 
-	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+	fw_event = alloc_fw_event_work(0);
 	if (!fw_event)
 		return;
 	fw_event->event = MPT3SAS_PORT_ENABLE_COMPLETE;
 	fw_event->ioc = ioc;
 	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
+}
+
+static struct fw_event_work *dequeue_next_fw_event(struct MPT3SAS_ADAPTER *ioc)
+{
+	unsigned long flags;
+	struct fw_event_work *fw_event = NULL;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	if (!list_empty(&ioc->fw_event_list)) {
+		fw_event = list_first_entry(&ioc->fw_event_list,
+				struct fw_event_work, list);
+		list_del_init(&fw_event->list);
+	}
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
+	return fw_event;
 }
 
 /**
@@ -2590,17 +2764,25 @@ mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc)
 static void
 _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc)
 {
-	struct fw_event_work *fw_event, *next;
+	struct fw_event_work *fw_event;
 
 	if (list_empty(&ioc->fw_event_list) ||
 	     !ioc->firmware_event_thread || in_interrupt())
 		return;
 
-	list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
-		if (cancel_delayed_work_sync(&fw_event->delayed_work)) {
-			_scsih_fw_event_free(ioc, fw_event);
-			continue;
-		}
+	while ((fw_event = dequeue_next_fw_event(ioc))) {
+		/*
+		 * Wait on the fw_event to complete. If this returns 1, then
+		 * the event was never executed, and we need a put for the
+		 * reference the delayed_work had on the fw_event.
+		 *
+		 * If it did execute, we wait for it to finish, and the put will
+		 * happen from _firmware_event_work()
+		 */
+		if (cancel_delayed_work_sync(&fw_event->delayed_work))
+			fw_event_work_put(fw_event);
+
+		fw_event_work_put(fw_event);
 	}
 }
 
@@ -2763,7 +2945,7 @@ _scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	struct scsi_device *sdev;
 	struct _sas_device *sas_device;
 
-	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
 	if (!sas_device)
 		return;
 
@@ -2779,6 +2961,8 @@ _scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 			continue;
 		_scsih_internal_device_block(sdev, sas_device_priv_data);
 	}
+
+	sas_device_put(sas_device);
 }
 
 /**
@@ -2807,12 +2991,13 @@ _scsih_block_io_to_children_attached_to_ex(struct MPT3SAS_ADAPTER *ioc,
 		if (mpt3sas_port->remote_identify.device_type ==
 		    SAS_END_DEVICE) {
 			spin_lock_irqsave(&ioc->sas_device_lock, flags);
-			sas_device =
-			    mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
-			   mpt3sas_port->remote_identify.sas_address);
-			if (sas_device)
+			sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+			    mpt3sas_port->remote_identify.sas_address);
+			if (sas_device) {
 				set_bit(sas_device->handle,
-				    ioc->blocking_handles);
+						ioc->blocking_handles);
+				sas_device_put(sas_device);
+			}
 			spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 		}
 	}
@@ -2880,7 +3065,7 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 {
 	Mpi2SCSITaskManagementRequest_t *mpi_request;
 	u16 smid;
-	struct _sas_device *sas_device;
+	struct _sas_device *sas_device = NULL;
 	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
 	u64 sas_address = 0;
 	unsigned long flags;
@@ -2913,7 +3098,7 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 		return;
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
 	if (sas_device && sas_device->starget &&
 	    sas_device->starget->hostdata) {
 		sas_target_priv_data = sas_device->starget->hostdata;
@@ -2947,14 +3132,14 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	if (!smid) {
 		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
 		if (!delayed_tr)
-			return;
+			goto out;
 		INIT_LIST_HEAD(&delayed_tr->list);
 		delayed_tr->handle = handle;
 		list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
 		dewtprintk(ioc, pr_info(MPT3SAS_FMT
 		    "DELAYED:tr:handle(0x%04x), (open)\n",
 		    ioc->name, handle));
-		return;
+		goto out;
 	}
 
 	dewtprintk(ioc, pr_info(MPT3SAS_FMT
@@ -2968,6 +3153,10 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
 	mpt3sas_base_put_smid_hi_priority(ioc, smid);
 	mpt3sas_trigger_master(ioc, MASTER_TRIGGER_DEVICE_REMOVAL);
+
+out:
+	if (sas_device)
+		sas_device_put(sas_device);
 }
 
 /**
@@ -3337,7 +3526,7 @@ _scsih_set_volume_delete_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	unsigned long flags;
 
 	spin_lock_irqsave(&ioc->raid_device_lock, flags);
-	raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+	raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
 	if (raid_device && raid_device->starget &&
 	    raid_device->starget->hostdata) {
 		sas_target_priv_data =
@@ -3398,6 +3587,9 @@ _scsih_check_ir_config_unhide_events(struct MPT3SAS_ADAPTER *ioc,
 	a = 0;
 	b = 0;
 
+	if (ioc->is_warpdrive)
+		return;
+
 	/* Volume Resets for Deleted or Removed */
 	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
 	for (i = 0; i < event_data->NumElements; i++, element++) {
@@ -3634,8 +3826,9 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
 }
 
 
+
 /**
- * _scsih_qcmd - main scsi request entry point
+ * scsih_qcmd - main scsi request entry point
  * @scmd: pointer to scsi command object
  * @done: function pointer to be invoked on completion
  *
@@ -3645,21 +3838,20 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
  * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
  * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
  */
-static int
-_scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
+int
+scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
 	struct MPT3SAS_DEVICE *sas_device_priv_data;
 	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _raid_device *raid_device;
 	Mpi2SCSIIORequest_t *mpi_request;
 	u32 mpi_control;
 	u16 smid;
 	u16 handle;
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_SCSI)
 		scsi_print_command(scmd);
-#endif
 
 	sas_device_priv_data = scmd->device->hostdata;
 	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
@@ -3709,8 +3901,11 @@ _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 	/* set tags */
 	mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 
-	if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
-	    scmd->cmd_len != 32)
+	/* Make sure Device is not raid volume.
+	 * We do not expose raid functionality to upper layer for warpdrive.
+	 */
+	if (!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev)
+	    && sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
 		mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
 
 	smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
@@ -3752,13 +3947,19 @@ _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 	} else
 		ioc->build_zero_len_sge(ioc, &mpi_request->SGL);
 
+	raid_device = sas_target_priv_data->raid_device;
+	if (raid_device && raid_device->direct_io_enabled)
+		mpt3sas_setup_direct_io(ioc, scmd, raid_device, mpi_request,
+		    smid);
+
 	if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) {
 		if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) {
 			mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len |
 			    MPI25_SCSIIO_IOFLAGS_FAST_PATH);
 			mpt3sas_base_put_smid_fast_path(ioc, smid, handle);
 		} else
-			mpt3sas_base_put_smid_scsi_io(ioc, smid, handle);
+			mpt3sas_base_put_smid_scsi_io(ioc, smid,
+			    le16_to_cpu(mpi_request->DevHandle));
 	} else
 		mpt3sas_base_put_smid_default(ioc, smid);
 	return 0;
@@ -3790,7 +3991,6 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
 	}
 }
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 /**
  * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
  * @ioc: per adapter object
@@ -3818,14 +4018,16 @@ _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 	char *desc_scsi_state = ioc->tmp_string;
 	u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
 	struct _sas_device *sas_device = NULL;
-	unsigned long flags;
 	struct scsi_target *starget = scmd->device->sdev_target;
 	struct MPT3SAS_TARGET *priv_target = starget->hostdata;
 	char *device_str = NULL;
 
 	if (!priv_target)
 		return;
-	device_str = "volume";
+	if (ioc->hide_ir_msg)
+		device_str = "WarpDrive";
+	else
+		device_str = "volume";
 
 	if (log_info == 0x31170000)
 		return;
@@ -3946,9 +4148,7 @@ _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 		pr_warn(MPT3SAS_FMT "\t%s wwid(0x%016llx)\n", ioc->name,
 		    device_str, (unsigned long long)priv_target->sas_address);
 	} else {
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
-		    priv_target->sas_address);
+		sas_device = mpt3sas_get_sdev_from_target(ioc, priv_target);
 		if (sas_device) {
 			pr_warn(MPT3SAS_FMT
 				"\tsas_address(0x%016llx), phy(%d)\n",
@@ -3967,8 +4167,9 @@ _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 				  " connector name( %s)\n", ioc->name,
 				  sas_device->enclosure_level,
 				  sas_device->connector_name);
+
+			sas_device_put(sas_device);
 		}
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	}
 
 	pr_warn(MPT3SAS_FMT
@@ -4003,7 +4204,6 @@ _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 		_scsih_response_code(ioc, response_bytes[0]);
 	}
 }
-#endif
 
 /**
  * _scsih_turn_on_pfa_led - illuminate PFA LED
@@ -4020,7 +4220,7 @@ _scsih_turn_on_pfa_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	Mpi2SepRequest_t mpi_request;
 	struct _sas_device *sas_device;
 
-	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
 	if (!sas_device)
 		return;
 
@@ -4035,7 +4235,7 @@ _scsih_turn_on_pfa_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	    &mpi_request)) != 0) {
 		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
 		__FILE__, __LINE__, __func__);
-		return;
+		goto out;
 	}
 	sas_device->pfa_led_on = 1;
 
@@ -4044,9 +4244,12 @@ _scsih_turn_on_pfa_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 			"enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
 			ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
 		    le32_to_cpu(mpi_reply.IOCLogInfo)));
-		return;
+		goto out;
 	}
+out:
+	sas_device_put(sas_device);
 }
+
 /**
  * _scsih_turn_off_pfa_led - turn off Fault LED
  * @ioc: per adapter object
@@ -4085,6 +4288,7 @@ _scsih_turn_off_pfa_led(struct MPT3SAS_ADAPTER *ioc,
 		return;
 	}
 }
+
 /**
  * _scsih_send_event_to_turn_on_pfa_led - fire delayed event
  * @ioc: per adapter object
@@ -4098,13 +4302,14 @@ _scsih_send_event_to_turn_on_pfa_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 {
 	struct fw_event_work *fw_event;
 
-	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+	fw_event = alloc_fw_event_work(0);
 	if (!fw_event)
 		return;
 	fw_event->event = MPT3SAS_TURN_ON_PFA_LED;
 	fw_event->device_handle = handle;
 	fw_event->ioc = ioc;
 	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
 }
 
 /**
@@ -4128,19 +4333,17 @@ _scsih_smart_predicted_fault(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 
 	/* only handle non-raid devices */
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
-	if (!sas_device) {
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		return;
-	}
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (!sas_device)
+		goto out_unlock;
+
 	starget = sas_device->starget;
 	sas_target_priv_data = starget->hostdata;
 
 	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) ||
-	   ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) {
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		return;
-	}
+	   ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)))
+		goto out_unlock;
+
 	if (sas_device->enclosure_handle != 0)
 		starget_printk(KERN_INFO, starget, "predicted fault, "
 			"enclosure logical id(0x%016llx), slot(%d)\n",
@@ -4163,7 +4366,7 @@ _scsih_smart_predicted_fault(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	if (!event_reply) {
 		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
 		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
+		goto out;
 	}
 
 	event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
@@ -4180,6 +4383,14 @@ _scsih_smart_predicted_fault(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address);
 	mpt3sas_ctl_add_to_event_log(ioc, event_reply);
 	kfree(event_reply);
+out:
+	if (sas_device)
+		sas_device_put(sas_device);
+	return;
+
+out_unlock:
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	goto out;
 }
 
 /**
@@ -4207,6 +4418,7 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 	u32 log_info;
 	struct MPT3SAS_DEVICE *sas_device_priv_data;
 	u32 response_code = 0;
+	unsigned long flags;
 
 	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
 	scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
@@ -4228,6 +4440,24 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 	}
 	ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
 
+	/*
+	 * WARPDRIVE: If direct_io is set then it is directIO,
+	 * the failed direct I/O should be redirected to volume
+	 */
+	if (mpt3sas_scsi_direct_io_get(ioc, smid) &&
+	     ((ioc_status & MPI2_IOCSTATUS_MASK)
+	      != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) {
+		spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+		ioc->scsi_lookup[smid - 1].scmd = scmd;
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		mpt3sas_scsi_direct_io_set(ioc, smid, 0);
+		memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
+		mpi_request->DevHandle =
+		    cpu_to_le16(sas_device_priv_data->sas_target->handle);
+		mpt3sas_base_put_smid_scsi_io(ioc, smid,
+		    sas_device_priv_data->sas_target->handle);
+		return 0;
+	}
 	/* turning off TLR */
 	scsi_state = mpi_reply->SCSIState;
 	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
@@ -4235,10 +4465,13 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 		    le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
 	if (!sas_device_priv_data->tlr_snoop_check) {
 		sas_device_priv_data->tlr_snoop_check++;
-		if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
-		    response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME)
-			sas_device_priv_data->flags &=
-			    ~MPT_DEVICE_TLR_ON;
+		if (!ioc->is_warpdrive &&
+		    !scsih_is_raid(&scmd->device->sdev_gendev) &&
+		    sas_is_tlr_enabled(scmd->device) &&
+		    response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
+			sas_disable_tlr(scmd->device);
+			sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
+		}
 	}
 
 	xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
@@ -4271,13 +4504,11 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 			    le16_to_cpu(mpi_reply->DevHandle));
 		mpt3sas_trigger_scsi(ioc, data.skey, data.asc, data.ascq);
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 		if (!(ioc->logging_level & MPT_DEBUG_REPLY) &&
 		     ((scmd->sense_buffer[2] == UNIT_ATTENTION) ||
 		     (scmd->sense_buffer[2] == MEDIUM_ERROR) ||
 		     (scmd->sense_buffer[2] == HARDWARE_ERROR)))
 			_scsih_scsi_ioc_info(ioc, scmd, mpi_reply, smid);
-#endif
 	}
 	switch (ioc_status) {
 	case MPI2_IOCSTATUS_BUSY:
@@ -4384,10 +4615,8 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 
 	}
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 	if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
 		_scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
-#endif
 
  out:
 
@@ -4933,13 +5162,11 @@ _scsih_check_device(struct MPT3SAS_ADAPTER *ioc,
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
-	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
 	    sas_address);
 
-	if (!sas_device) {
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		return;
-	}
+	if (!sas_device)
+		goto out_unlock;
 
 	if (unlikely(sas_device->handle != handle)) {
 		starget = sas_device->starget;
@@ -4967,20 +5194,25 @@ _scsih_check_device(struct MPT3SAS_ADAPTER *ioc,
 		pr_err(MPT3SAS_FMT
 			"device is not present handle(0x%04x), flags!!!\n",
 			ioc->name, handle);
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		return;
+		goto out_unlock;
 	}
 
 	/* check if there were any issues with discovery */
 	if (_scsih_check_access_status(ioc, sas_address, handle,
-	    sas_device_pg0.AccessStatus)) {
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		return;
-	}
+	    sas_device_pg0.AccessStatus))
+		goto out_unlock;
 
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	_scsih_ublock_io_device(ioc, sas_address);
 
+	if (sas_device)
+		sas_device_put(sas_device);
+	return;
+
+out_unlock:
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (sas_device)
+		sas_device_put(sas_device);
 }
 
 /**
@@ -5005,7 +5237,6 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
 	u32 ioc_status;
 	u64 sas_address;
 	u32 device_info;
-	unsigned long flags;
 
 	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
 	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
@@ -5041,13 +5272,12 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
 	    sas_device_pg0.AccessStatus))
 		return -1;
 
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
-	    sas_address);
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-
-	if (sas_device)
+	sas_device = mpt3sas_get_sdev_by_addr(ioc,
+					sas_address);
+	if (sas_device) {
+		sas_device_put(sas_device);
 		return -1;
+	}
 
 	sas_device = kzalloc(sizeof(struct _sas_device),
 	    GFP_KERNEL);
@@ -5057,6 +5287,7 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
 		return 0;
 	}
 
+	kref_init(&sas_device->refcount);
 	sas_device->handle = handle;
 	if (_scsih_get_sas_address(ioc,
 	    le16_to_cpu(sas_device_pg0.ParentDevHandle),
@@ -5098,6 +5329,7 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
 	else
 		_scsih_sas_device_add(ioc, sas_device);
 
+	sas_device_put(sas_device);
 	return 0;
 }
 
@@ -5144,7 +5376,9 @@ _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
 		sas_target_priv_data->handle =
 		     MPT3SAS_INVALID_DEVICE_HANDLE;
 	}
-	mpt3sas_transport_port_remove(ioc,
+
+	if (!ioc->hide_drives)
+		mpt3sas_transport_port_remove(ioc,
 		    sas_device->sas_address,
 		    sas_device->sas_address_parent);
 
@@ -5180,11 +5414,8 @@ _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
 		    "%s: exit: enclosure level(0x%04x), connector name(%s)\n",
 		    ioc->name, __func__, sas_device->enclosure_level,
 		    sas_device->connector_name));
-
-	kfree(sas_device);
 }
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 /**
  * _scsih_sas_topology_change_event_debug - debug for topology event
  * @ioc: per adapter object
@@ -5262,7 +5493,6 @@ _scsih_sas_topology_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
 
 	}
 }
-#endif
 
 /**
  * _scsih_sas_topology_change_event - handle topology changes
@@ -5287,10 +5517,8 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
 		(Mpi2EventDataSasTopologyChangeList_t *)
 		fw_event->event_data;
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
 		_scsih_sas_topology_change_event_debug(ioc, event_data);
-#endif
 
 	if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
 		return 0;
@@ -5396,7 +5624,6 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
 	return 0;
 }
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 /**
  * _scsih_sas_device_status_change_event_debug - debug for device event
  * @event_data: event data payload
@@ -5464,7 +5691,6 @@ _scsih_sas_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
 		    event_data->ASC, event_data->ASCQ);
 	pr_info("\n");
 }
-#endif
 
 /**
  * _scsih_sas_device_status_change_event - handle device status change
@@ -5486,11 +5712,9 @@ _scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
 		(Mpi2EventDataSasDeviceStatusChange_t *)
 		fw_event->event_data;
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
 		_scsih_sas_device_status_change_event_debug(ioc,
 		     event_data);
-#endif
 
 	/* In MPI Revision K (0xC), the internal device reset complete was
 	 * implemented, so avoid setting tm_busy flag for older firmware.
@@ -5506,29 +5730,30 @@ _scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	sas_address = le64_to_cpu(event_data->SASAddress);
-	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
 	    sas_address);
 
-	if (!sas_device || !sas_device->starget) {
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		return;
-	}
+	if (!sas_device || !sas_device->starget)
+		goto out;
 
 	target_priv_data = sas_device->starget->hostdata;
-	if (!target_priv_data) {
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		return;
-	}
+	if (!target_priv_data)
+		goto out;
 
 	if (event_data->ReasonCode ==
 	    MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
 		target_priv_data->tm_busy = 1;
 	else
 		target_priv_data->tm_busy = 0;
+
+out:
+	if (sas_device)
+		sas_device_put(sas_device);
+
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
 }
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 /**
  * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure
  * event
@@ -5563,7 +5788,6 @@ _scsih_sas_enclosure_dev_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
 	    (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
 	    le16_to_cpu(event_data->StartSlot));
 }
-#endif
 
 /**
  * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
@@ -5577,12 +5801,10 @@ static void
 _scsih_sas_enclosure_dev_status_change_event(struct MPT3SAS_ADAPTER *ioc,
 	struct fw_event_work *fw_event)
 {
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
 		_scsih_sas_enclosure_dev_status_change_event_debug(ioc,
 		     (Mpi2EventDataSasEnclDevStatusChange_t *)
 		     fw_event->event_data);
-#endif
 }
 
 /**
@@ -5762,17 +5984,15 @@ _scsih_sas_discovery_event(struct MPT3SAS_ADAPTER *ioc,
 	Mpi2EventDataSasDiscovery_t *event_data =
 		(Mpi2EventDataSasDiscovery_t *) fw_event->event_data;
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
 		pr_info(MPT3SAS_FMT "discovery event: (%s)", ioc->name,
 		    (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
 		    "start" : "stop");
-	if (event_data->DiscoveryStatus)
-		pr_info("discovery_status(0x%08x)",
-		    le32_to_cpu(event_data->DiscoveryStatus));
-	pr_info("\n");
+		if (event_data->DiscoveryStatus)
+			pr_info("discovery_status(0x%08x)",
+			    le32_to_cpu(event_data->DiscoveryStatus));
+		pr_info("\n");
 	}
-#endif
 
 	if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
 	    !ioc->sas_hba.num_phys) {
@@ -5804,6 +6024,8 @@ _scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num)
 	u16 ioc_status;
 	u32 log_info;
 
+	if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+		return rc;
 
 	mutex_lock(&ioc->scsih_cmds.mutex);
 
@@ -5971,7 +6193,7 @@ _scsih_sas_volume_delete(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	struct scsi_target *starget = NULL;
 
 	spin_lock_irqsave(&ioc->raid_device_lock, flags);
-	raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+	raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
 	if (raid_device) {
 		if (raid_device->starget) {
 			starget = raid_device->starget;
@@ -6008,7 +6230,7 @@ _scsih_sas_pd_expose(struct MPT3SAS_ADAPTER *ioc,
 	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
 	if (sas_device) {
 		sas_device->volume_handle = 0;
 		sas_device->volume_wwid = 0;
@@ -6027,6 +6249,8 @@ _scsih_sas_pd_expose(struct MPT3SAS_ADAPTER *ioc,
 	/* exposing raid component */
 	if (starget)
 		starget_for_each_device(starget, NULL, _scsih_reprobe_lun);
+
+	sas_device_put(sas_device);
 }
 
 /**
@@ -6055,7 +6279,7 @@ _scsih_sas_pd_hide(struct MPT3SAS_ADAPTER *ioc,
 		    &volume_wwid);
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
 	if (sas_device) {
 		set_bit(handle, ioc->pd_handles);
 		if (sas_device->starget && sas_device->starget->hostdata) {
@@ -6073,8 +6297,11 @@ _scsih_sas_pd_hide(struct MPT3SAS_ADAPTER *ioc,
 
 	/* hiding raid component */
 	_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+
 	if (starget)
 		starget_for_each_device(starget, (void *)1, _scsih_reprobe_lun);
+
+	sas_device_put(sas_device);
 }
 
 /**
@@ -6107,7 +6334,6 @@ _scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc,
 	Mpi2EventIrConfigElement_t *element)
 {
 	struct _sas_device *sas_device;
-	unsigned long flags;
 	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
 	Mpi2ConfigReply_t mpi_reply;
 	Mpi2SasDevicePage0_t sas_device_pg0;
@@ -6117,11 +6343,10 @@ _scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc,
 
 	set_bit(handle, ioc->pd_handles);
 
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
 	if (sas_device) {
 		_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+		sas_device_put(sas_device);
 		return;
 	}
 
@@ -6149,7 +6374,6 @@ _scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc,
 	_scsih_add_device(ioc, handle, 0, 1);
 }
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 /**
  * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
  * @ioc: per adapter object
@@ -6229,7 +6453,6 @@ _scsih_sas_ir_config_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
 		    element->PhysDiskNum);
 	}
 }
-#endif
 
 /**
  * _scsih_sas_ir_config_change_event - handle ir configuration change events
@@ -6250,18 +6473,16 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc,
 		(Mpi2EventDataIrConfigChangeList_t *)
 		fw_event->event_data;
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
-	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+	if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
+	     (!ioc->hide_ir_msg))
 		_scsih_sas_ir_config_change_event_debug(ioc, event_data);
 
-#endif
-
 	foreign_config = (le32_to_cpu(event_data->Flags) &
 	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
 
 	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
-	if (ioc->shost_recovery) {
-
+	if (ioc->shost_recovery &&
+	    ioc->hba_mpi_version_belonged != MPI2_VERSION) {
 		for (i = 0; i < event_data->NumElements; i++, element++) {
 			if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_HIDE)
 				_scsih_ir_fastpath(ioc,
@@ -6270,6 +6491,7 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc,
 		}
 		return;
 	}
+
 	for (i = 0; i < event_data->NumElements; i++, element++) {
 
 		switch (element->ReasonCode) {
@@ -6285,16 +6507,20 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc,
 				    le16_to_cpu(element->VolDevHandle));
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
-			_scsih_sas_pd_hide(ioc, element);
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_hide(ioc, element);
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
-			_scsih_sas_pd_expose(ioc, element);
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_expose(ioc, element);
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_HIDE:
-			_scsih_sas_pd_add(ioc, element);
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_add(ioc, element);
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
-			_scsih_sas_pd_delete(ioc, element);
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_delete(ioc, element);
 			break;
 		}
 	}
@@ -6329,10 +6555,11 @@ _scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER *ioc,
 
 	handle = le16_to_cpu(event_data->VolDevHandle);
 	state = le32_to_cpu(event_data->NewValue);
-	dewtprintk(ioc, pr_info(MPT3SAS_FMT
-		"%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
-		ioc->name, __func__,  handle,
-	    le32_to_cpu(event_data->PreviousValue), state));
+	if (!ioc->hide_ir_msg)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
+		    ioc->name, __func__,  handle,
+		    le32_to_cpu(event_data->PreviousValue), state));
 	switch (state) {
 	case MPI2_RAID_VOL_STATE_MISSING:
 	case MPI2_RAID_VOL_STATE_FAILED:
@@ -6344,7 +6571,7 @@ _scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER *ioc,
 	case MPI2_RAID_VOL_STATE_OPTIMAL:
 
 		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+		raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
 		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
 
 		if (raid_device)
@@ -6398,7 +6625,6 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
 	u16 handle, parent_handle;
 	u32 state;
 	struct _sas_device *sas_device;
-	unsigned long flags;
 	Mpi2ConfigReply_t mpi_reply;
 	Mpi2SasDevicePage0_t sas_device_pg0;
 	u32 ioc_status;
@@ -6415,10 +6641,12 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
 	handle = le16_to_cpu(event_data->PhysDiskDevHandle);
 	state = le32_to_cpu(event_data->NewValue);
 
-	dewtprintk(ioc, pr_info(MPT3SAS_FMT
-		"%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
-		ioc->name, __func__,  handle,
+	if (!ioc->hide_ir_msg)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
+		    ioc->name, __func__,  handle,
 		    le32_to_cpu(event_data->PreviousValue), state));
+
 	switch (state) {
 	case MPI2_RAID_PD_STATE_ONLINE:
 	case MPI2_RAID_PD_STATE_DEGRADED:
@@ -6426,13 +6654,14 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
 	case MPI2_RAID_PD_STATE_OPTIMAL:
 	case MPI2_RAID_PD_STATE_HOT_SPARE:
 
-		set_bit(handle, ioc->pd_handles);
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		if (!ioc->is_warpdrive)
+			set_bit(handle, ioc->pd_handles);
 
-		if (sas_device)
+		sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+		if (sas_device) {
+			sas_device_put(sas_device);
 			return;
+		}
 
 		if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
 		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
@@ -6467,7 +6696,6 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
 	}
 }
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
 /**
  * _scsih_sas_ir_operation_status_event_debug - debug for IR op event
  * @ioc: per adapter object
@@ -6509,7 +6737,6 @@ _scsih_sas_ir_operation_status_event_debug(struct MPT3SAS_ADAPTER *ioc,
 	    le16_to_cpu(event_data->VolDevHandle),
 	    event_data->PercentComplete);
 }
-#endif
 
 /**
  * _scsih_sas_ir_operation_status_event - handle RAID operation events
@@ -6530,18 +6757,17 @@ _scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER *ioc,
 	unsigned long flags;
 	u16 handle;
 
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
-	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+	if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
+	    (!ioc->hide_ir_msg))
 		_scsih_sas_ir_operation_status_event_debug(ioc,
 		     event_data);
-#endif
 
 	/* code added for raid transport support */
 	if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
 
 		spin_lock_irqsave(&ioc->raid_device_lock, flags);
 		handle = le16_to_cpu(event_data->VolDevHandle);
-		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+		raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
 		if (raid_device)
 			raid_device->percent_complete =
 			    event_data->PercentComplete;
@@ -6703,7 +6929,7 @@ static void
 _scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
 	u16 handle)
 {
-	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
 	struct scsi_target *starget;
 	struct _raid_device *raid_device;
 	unsigned long flags;
@@ -6722,6 +6948,13 @@ _scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
 			starget_printk(KERN_INFO, raid_device->starget,
 			    "handle(0x%04x), wwid(0x%016llx)\n", handle,
 			    (unsigned long long)raid_device->wwid);
+
+			/*
+			 * WARPDRIVE: The handles of the PDs might have changed
+			 * across the host reset so re-initialize the
+			 * required data for Direct IO
+			 */
+			mpt3sas_init_warpdrive_properties(ioc, raid_device);
 			spin_lock_irqsave(&ioc->raid_device_lock, flags);
 			if (raid_device->handle == handle) {
 				spin_unlock_irqrestore(&ioc->raid_device_lock,
@@ -6791,6 +7024,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
 	}
 
 	/* refresh the pd_handles */
+	if (!ioc->is_warpdrive) {
 		phys_disk_num = 0xFF;
 		memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
 		while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
@@ -6804,6 +7038,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
 			handle = le16_to_cpu(pd_pg0.DevHandle);
 			set_bit(handle, ioc->pd_handles);
 		}
+	}
  out:
 	pr_info(MPT3SAS_FMT "search for responding raid volumes: complete\n",
 		ioc->name);
@@ -6906,6 +7141,7 @@ _scsih_remove_unresponding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
 	struct _raid_device *raid_device, *raid_device_next;
 	struct list_head tmp_list;
 	unsigned long flags;
+	LIST_HEAD(head);
 
 	pr_info(MPT3SAS_FMT "removing unresponding devices: start\n",
 	    ioc->name);
@@ -6913,14 +7149,28 @@ _scsih_remove_unresponding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
 	/* removing unresponding end devices */
 	pr_info(MPT3SAS_FMT "removing unresponding devices: end-devices\n",
 	    ioc->name);
+	/*
+	 * Iterate, pulling off devices marked as non-responding. We become the
+	 * owner for the reference the list had on any object we prune.
+	 */
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	list_for_each_entry_safe(sas_device, sas_device_next,
 	    &ioc->sas_device_list, list) {
 		if (!sas_device->responding)
-			mpt3sas_device_remove_by_sas_address(ioc,
-			    sas_device->sas_address);
+			list_move_tail(&sas_device->list, &head);
 		else
 			sas_device->responding = 0;
 	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	/*
+	 * Now, uninitialize and remove the unresponding devices we pruned.
+	 */
+	list_for_each_entry_safe(sas_device, sas_device_next, &head, list) {
+		_scsih_remove_device(ioc, sas_device);
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
 
 	/* removing unresponding volumes */
 	if (ioc->ir_firmware) {
@@ -7074,11 +7324,11 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
 		}
 		phys_disk_num = pd_pg0.PhysDiskNum;
 		handle = le16_to_cpu(pd_pg0.DevHandle);
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		if (sas_device)
+		sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+		if (sas_device) {
+			sas_device_put(sas_device);
 			continue;
+		}
 		if (mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
 		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
 		    handle) != 0)
@@ -7199,12 +7449,12 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
 		if (!(_scsih_is_end_device(
 		    le32_to_cpu(sas_device_pg0.DeviceInfo))))
 			continue;
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+		sas_device = mpt3sas_get_sdev_by_addr(ioc,
 		    le64_to_cpu(sas_device_pg0.SASAddress));
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		if (sas_device)
+		if (sas_device) {
+			sas_device_put(sas_device);
 			continue;
+		}
 		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
 		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
 			pr_info(MPT3SAS_FMT "\tBEFORE adding end device: " \
@@ -7296,10 +7546,11 @@ mpt3sas_scsih_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
 static void
 _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
 {
+	_scsih_fw_event_del_from_list(ioc, fw_event);
+
 	/* the queue is being flushed so ignore this event */
-	if (ioc->remove_host ||
-	    ioc->pci_error_recovery) {
-		_scsih_fw_event_free(ioc, fw_event);
+	if (ioc->remove_host || ioc->pci_error_recovery) {
+		fw_event_work_put(fw_event);
 		return;
 	}
 
@@ -7310,8 +7561,16 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
 			fw_event->event_data);
 		break;
 	case MPT3SAS_REMOVE_UNRESPONDING_DEVICES:
-		while (scsi_host_in_recovery(ioc->shost) || ioc->shost_recovery)
+		while (scsi_host_in_recovery(ioc->shost) ||
+					 ioc->shost_recovery) {
+			/*
+			 * If we're unloading, bail. Otherwise, this can become
+			 * an infinite loop.
+			 */
+			if (ioc->remove_host)
+				goto out;
 			ssleep(1);
+		}
 		_scsih_remove_unresponding_sas_devices(ioc);
 		_scsih_scan_for_devices_after_reset(ioc);
 		break;
@@ -7356,7 +7615,8 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
 		_scsih_sas_ir_operation_status_event(ioc, fw_event);
 		break;
 	}
-	_scsih_fw_event_free(ioc, fw_event);
+out:
+	fw_event_work_put(fw_event);
 }
 
 /**
@@ -7453,7 +7713,53 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
 		    (Mpi2EventDataIrVolume_t *)
 		    mpi_reply->EventData);
 		break;
+	case MPI2_EVENT_LOG_ENTRY_ADDED:
+	{
+		Mpi2EventDataLogEntryAdded_t *log_entry;
+		u32 *log_code;
+
+		if (!ioc->is_warpdrive)
+			break;
+
+		log_entry = (Mpi2EventDataLogEntryAdded_t *)
+		    mpi_reply->EventData;
+		log_code = (u32 *)log_entry->LogData;
 
+		if (le16_to_cpu(log_entry->LogEntryQualifier)
+		    != MPT2_WARPDRIVE_LOGENTRY)
+			break;
+
+		switch (le32_to_cpu(*log_code)) {
+		case MPT2_WARPDRIVE_LC_SSDT:
+			pr_warn(MPT3SAS_FMT "WarpDrive Warning: "
+			    "IO Throttling has occurred in the WarpDrive "
+			    "subsystem. Check WarpDrive documentation for "
+			    "additional details.\n", ioc->name);
+			break;
+		case MPT2_WARPDRIVE_LC_SSDLW:
+			pr_warn(MPT3SAS_FMT "WarpDrive Warning: "
+			    "Program/Erase Cycles for the WarpDrive subsystem "
+			    "in degraded range. Check WarpDrive documentation "
+			    "for additional details.\n", ioc->name);
+			break;
+		case MPT2_WARPDRIVE_LC_SSDLF:
+			pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: "
+			    "There are no Program/Erase Cycles for the "
+			    "WarpDrive subsystem. The storage device will be "
+			    "in read-only mode. Check WarpDrive documentation "
+			    "for additional details.\n", ioc->name);
+			break;
+		case MPT2_WARPDRIVE_LC_BRMF:
+			pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: "
+			    "The Backup Rail Monitor has failed on the "
+			    "WarpDrive subsystem. Check WarpDrive "
+			    "documentation for additional details.\n",
+			    ioc->name);
+			break;
+		}
+
+		break;
+	}
 	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
 	case MPI2_EVENT_IR_OPERATION_STATUS:
 	case MPI2_EVENT_SAS_DISCOVERY:
@@ -7472,7 +7778,7 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
 	}
 
 	sz = le16_to_cpu(mpi_reply->EventDataLength) * 4;
-	fw_event = kzalloc(sizeof(*fw_event) + sz, GFP_ATOMIC);
+	fw_event = alloc_fw_event_work(sz);
 	if (!fw_event) {
 		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
 		    ioc->name, __FILE__, __LINE__, __func__);
@@ -7485,39 +7791,10 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
 	fw_event->VP_ID = mpi_reply->VP_ID;
 	fw_event->event = event;
 	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
 	return 1;
 }
 
-/* shost template */
-static struct scsi_host_template scsih_driver_template = {
-	.module				= THIS_MODULE,
-	.name				= "Fusion MPT SAS Host",
-	.proc_name			= MPT3SAS_DRIVER_NAME,
-	.queuecommand			= _scsih_qcmd,
-	.target_alloc			= _scsih_target_alloc,
-	.slave_alloc			= _scsih_slave_alloc,
-	.slave_configure		= _scsih_slave_configure,
-	.target_destroy			= _scsih_target_destroy,
-	.slave_destroy			= _scsih_slave_destroy,
-	.scan_finished			= _scsih_scan_finished,
-	.scan_start			= _scsih_scan_start,
-	.change_queue_depth		= _scsih_change_queue_depth,
-	.eh_abort_handler		= _scsih_abort,
-	.eh_device_reset_handler	= _scsih_dev_reset,
-	.eh_target_reset_handler	= _scsih_target_reset,
-	.eh_host_reset_handler		= _scsih_host_reset,
-	.bios_param			= _scsih_bios_param,
-	.can_queue			= 1,
-	.this_id			= -1,
-	.sg_tablesize			= MPT3SAS_SG_DEPTH,
-	.max_sectors			= 32767,
-	.cmd_per_lun			= 7,
-	.use_clustering			= ENABLE_CLUSTERING,
-	.shost_attrs			= mpt3sas_host_attrs,
-	.sdev_attrs			= mpt3sas_dev_attrs,
-	.track_queue_depth		= 1,
-};
-
 /**
  * _scsih_expander_node_remove - removing expander device from list.
  * @ioc: per adapter object
@@ -7613,7 +7890,8 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
 	mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
 	mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
 
-	pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name);
+	if (!ioc->hide_ir_msg)
+		pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name);
 	init_completion(&ioc->scsih_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
 	wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
@@ -7626,10 +7904,11 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
 
 	if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
 		mpi_reply = ioc->scsih_cmds.reply;
-		pr_info(MPT3SAS_FMT
-			"IR shutdown (complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
-		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
-		    le32_to_cpu(mpi_reply->IOCLogInfo));
+		if (!ioc->hide_ir_msg)
+			pr_info(MPT3SAS_FMT "IR shutdown "
+			   "(complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+			    le32_to_cpu(mpi_reply->IOCLogInfo));
 	}
 
  out:
@@ -7638,13 +7917,13 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
 }
 
 /**
- * _scsih_remove - detach and remove add host
+ * scsih_remove - detach and remove add host
  * @pdev: PCI device struct
  *
  * Routine called when unloading the driver.
  * Return nothing.
  */
-static void _scsih_remove(struct pci_dev *pdev)
+void scsih_remove(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -7705,18 +7984,20 @@ static void _scsih_remove(struct pci_dev *pdev)
 	sas_remove_host(shost);
 	scsi_remove_host(shost);
 	mpt3sas_base_detach(ioc);
+	spin_lock(&gioc_lock);
 	list_del(&ioc->list);
+	spin_unlock(&gioc_lock);
 	scsi_host_put(shost);
 }
 
 /**
- * _scsih_shutdown - routine call during system shutdown
+ * scsih_shutdown - routine call during system shutdown
  * @pdev: PCI device struct
  *
  * Return nothing.
  */
-static void
-_scsih_shutdown(struct pci_dev *pdev)
+void
+scsih_shutdown(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -7794,6 +8075,8 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc)
 		list_move_tail(&sas_device->list, &ioc->sas_device_list);
 		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
+		if (ioc->hide_drives)
+			return;
 		if (!mpt3sas_transport_port_add(ioc, handle,
 		    sas_address_parent)) {
 			_scsih_sas_device_remove(ioc, sas_device);
@@ -7831,6 +8114,48 @@ _scsih_probe_raid(struct MPT3SAS_ADAPTER *ioc)
 	}
 }
 
+static struct _sas_device *get_next_sas_device(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _sas_device *sas_device = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	if (!list_empty(&ioc->sas_device_init_list)) {
+		sas_device = list_first_entry(&ioc->sas_device_init_list,
+				struct _sas_device, list);
+		sas_device_get(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return sas_device;
+}
+
+static void sas_device_make_active(struct MPT3SAS_ADAPTER *ioc,
+		struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+
+	/*
+	 * Since we dropped the lock during the call to port_add(), we need to
+	 * be careful here that somebody else didn't move or delete this item
+	 * while we were busy with other things.
+	 *
+	 * If it was on the list, we need a put() for the reference the list
+	 * had. Either way, we need a get() for the destination list.
+	 */
+	if (!list_empty(&sas_device->list)) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+
+	sas_device_get(sas_device);
+	list_add_tail(&sas_device->list, &ioc->sas_device_list);
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
 /**
  * _scsih_probe_sas - reporting sas devices to sas transport
  * @ioc: per adapter object
@@ -7840,17 +8165,16 @@ _scsih_probe_raid(struct MPT3SAS_ADAPTER *ioc)
 static void
 _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc)
 {
-	struct _sas_device *sas_device, *next;
-	unsigned long flags;
+	struct _sas_device *sas_device;
 
-	/* SAS Device List */
-	list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
-	    list) {
+	if (ioc->hide_drives)
+		return;
 
+	while ((sas_device = get_next_sas_device(ioc))) {
 		if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
 		    sas_device->sas_address_parent)) {
-			list_del(&sas_device->list);
-			kfree(sas_device);
+			_scsih_sas_device_remove(ioc, sas_device);
+			sas_device_put(sas_device);
 			continue;
 		} else if (!sas_device->starget) {
 			/*
@@ -7863,15 +8187,13 @@ _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc)
 				mpt3sas_transport_port_remove(ioc,
 				    sas_device->sas_address,
 				    sas_device->sas_address_parent);
-				list_del(&sas_device->list);
-				kfree(sas_device);
+				_scsih_sas_device_remove(ioc, sas_device);
+				sas_device_put(sas_device);
 				continue;
 			}
 		}
-
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		list_move_tail(&sas_device->list, &ioc->sas_device_list);
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		sas_device_make_active(ioc, sas_device);
+		sas_device_put(sas_device);
 	}
 }
 
@@ -7908,15 +8230,15 @@ _scsih_probe_devices(struct MPT3SAS_ADAPTER *ioc)
 }
 
 /**
- * _scsih_scan_start - scsi lld callback for .scan_start
+ * scsih_scan_start - scsi lld callback for .scan_start
  * @shost: SCSI host pointer
  *
  * The shost has the ability to discover targets on its own instead
  * of scanning the entire bus.  In our implemention, we will kick off
  * firmware discovery.
  */
-static void
-_scsih_scan_start(struct Scsi_Host *shost)
+void
+scsih_scan_start(struct Scsi_Host *shost)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
 	int rc;
@@ -7934,7 +8256,7 @@ _scsih_scan_start(struct Scsi_Host *shost)
 }
 
 /**
- * _scsih_scan_finished - scsi lld callback for .scan_finished
+ * scsih_scan_finished - scsi lld callback for .scan_finished
  * @shost: SCSI host pointer
  * @time: elapsed time of the scan in jiffies
  *
@@ -7942,8 +8264,8 @@ _scsih_scan_start(struct Scsi_Host *shost)
  * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
  * we wait for firmware discovery to complete, then return 1.
  */
-static int
-_scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
+int
+scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
 
@@ -7987,6 +8309,124 @@ _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
 	return 1;
 }
 
+/* shost template for SAS 2.0 HBA devices */
+static struct scsi_host_template mpt2sas_driver_template = {
+	.module				= THIS_MODULE,
+	.name				= "Fusion MPT SAS Host",
+	.proc_name			= MPT2SAS_DRIVER_NAME,
+	.queuecommand			= scsih_qcmd,
+	.target_alloc			= scsih_target_alloc,
+	.slave_alloc			= scsih_slave_alloc,
+	.slave_configure		= scsih_slave_configure,
+	.target_destroy			= scsih_target_destroy,
+	.slave_destroy			= scsih_slave_destroy,
+	.scan_finished			= scsih_scan_finished,
+	.scan_start			= scsih_scan_start,
+	.change_queue_depth		= scsih_change_queue_depth,
+	.eh_abort_handler		= scsih_abort,
+	.eh_device_reset_handler	= scsih_dev_reset,
+	.eh_target_reset_handler	= scsih_target_reset,
+	.eh_host_reset_handler		= scsih_host_reset,
+	.bios_param			= scsih_bios_param,
+	.can_queue			= 1,
+	.this_id			= -1,
+	.sg_tablesize			= MPT2SAS_SG_DEPTH,
+	.max_sectors			= 32767,
+	.cmd_per_lun			= 7,
+	.use_clustering			= ENABLE_CLUSTERING,
+	.shost_attrs			= mpt3sas_host_attrs,
+	.sdev_attrs			= mpt3sas_dev_attrs,
+	.track_queue_depth		= 1,
+};
+
+/* raid transport support for SAS 2.0 HBA devices */
+static struct raid_function_template mpt2sas_raid_functions = {
+	.cookie		= &mpt2sas_driver_template,
+	.is_raid	= scsih_is_raid,
+	.get_resync	= scsih_get_resync,
+	.get_state	= scsih_get_state,
+};
+
+/* shost template for SAS 3.0 HBA devices */
+static struct scsi_host_template mpt3sas_driver_template = {
+	.module				= THIS_MODULE,
+	.name				= "Fusion MPT SAS Host",
+	.proc_name			= MPT3SAS_DRIVER_NAME,
+	.queuecommand			= scsih_qcmd,
+	.target_alloc			= scsih_target_alloc,
+	.slave_alloc			= scsih_slave_alloc,
+	.slave_configure		= scsih_slave_configure,
+	.target_destroy			= scsih_target_destroy,
+	.slave_destroy			= scsih_slave_destroy,
+	.scan_finished			= scsih_scan_finished,
+	.scan_start			= scsih_scan_start,
+	.change_queue_depth		= scsih_change_queue_depth,
+	.eh_abort_handler		= scsih_abort,
+	.eh_device_reset_handler	= scsih_dev_reset,
+	.eh_target_reset_handler	= scsih_target_reset,
+	.eh_host_reset_handler		= scsih_host_reset,
+	.bios_param			= scsih_bios_param,
+	.can_queue			= 1,
+	.this_id			= -1,
+	.sg_tablesize			= MPT3SAS_SG_DEPTH,
+	.max_sectors			= 32767,
+	.cmd_per_lun			= 7,
+	.use_clustering			= ENABLE_CLUSTERING,
+	.shost_attrs			= mpt3sas_host_attrs,
+	.sdev_attrs			= mpt3sas_dev_attrs,
+	.track_queue_depth		= 1,
+};
+
+/* raid transport support for SAS 3.0 HBA devices */
+static struct raid_function_template mpt3sas_raid_functions = {
+	.cookie		= &mpt3sas_driver_template,
+	.is_raid	= scsih_is_raid,
+	.get_resync	= scsih_get_resync,
+	.get_state	= scsih_get_state,
+};
+
+/**
+ * _scsih_determine_hba_mpi_version - determine in which MPI version class
+ *					this device belongs to.
+ * @pdev: PCI device struct
+ *
+ * return MPI2_VERSION for SAS 2.0 HBA devices,
+ *	MPI25_VERSION for SAS 3.0 HBA devices.
+ */
+u16
+_scsih_determine_hba_mpi_version(struct pci_dev *pdev)
+{
+
+	switch (pdev->device) {
+	case MPI2_MFGPAGE_DEVID_SSS6200:
+	case MPI2_MFGPAGE_DEVID_SAS2004:
+	case MPI2_MFGPAGE_DEVID_SAS2008:
+	case MPI2_MFGPAGE_DEVID_SAS2108_1:
+	case MPI2_MFGPAGE_DEVID_SAS2108_2:
+	case MPI2_MFGPAGE_DEVID_SAS2108_3:
+	case MPI2_MFGPAGE_DEVID_SAS2116_1:
+	case MPI2_MFGPAGE_DEVID_SAS2116_2:
+	case MPI2_MFGPAGE_DEVID_SAS2208_1:
+	case MPI2_MFGPAGE_DEVID_SAS2208_2:
+	case MPI2_MFGPAGE_DEVID_SAS2208_3:
+	case MPI2_MFGPAGE_DEVID_SAS2208_4:
+	case MPI2_MFGPAGE_DEVID_SAS2208_5:
+	case MPI2_MFGPAGE_DEVID_SAS2208_6:
+	case MPI2_MFGPAGE_DEVID_SAS2308_1:
+	case MPI2_MFGPAGE_DEVID_SAS2308_2:
+	case MPI2_MFGPAGE_DEVID_SAS2308_3:
+		return MPI2_VERSION;
+	case MPI25_MFGPAGE_DEVID_SAS3004:
+	case MPI25_MFGPAGE_DEVID_SAS3008:
+	case MPI25_MFGPAGE_DEVID_SAS3108_1:
+	case MPI25_MFGPAGE_DEVID_SAS3108_2:
+	case MPI25_MFGPAGE_DEVID_SAS3108_5:
+	case MPI25_MFGPAGE_DEVID_SAS3108_6:
+		return MPI25_VERSION;
+	}
+	return 0;
+}
+
 /**
  * _scsih_probe - attach and add scsi host
  * @pdev: PCI device struct
@@ -7994,26 +8434,72 @@ _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
  *
  * Returns 0 success, anything else error.
  */
-static int
+int
 _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct MPT3SAS_ADAPTER *ioc;
-	struct Scsi_Host *shost;
+	struct Scsi_Host *shost = NULL;
 	int rv;
+	u16 hba_mpi_version;
 
-	shost = scsi_host_alloc(&scsih_driver_template,
-	    sizeof(struct MPT3SAS_ADAPTER));
-	if (!shost)
+	/* Determine in which MPI version class this pci device belongs */
+	hba_mpi_version = _scsih_determine_hba_mpi_version(pdev);
+	if (hba_mpi_version == 0)
 		return -ENODEV;
 
-	/* init local params */
-	ioc = shost_priv(shost);
-	memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
+	/* Enumerate only SAS 2.0 HBA's if hbas_to_enumerate is one,
+	 * for other generation HBA's return with -ENODEV
+	 */
+	if ((hbas_to_enumerate == 1) && (hba_mpi_version !=  MPI2_VERSION))
+		return -ENODEV;
+
+	/* Enumerate only SAS 3.0 HBA's if hbas_to_enumerate is two,
+	 * for other generation HBA's return with -ENODEV
+	 */
+	if ((hbas_to_enumerate == 2) && (hba_mpi_version !=  MPI25_VERSION))
+		return -ENODEV;
+
+	switch (hba_mpi_version) {
+	case MPI2_VERSION:
+		/* Use mpt2sas driver host template for SAS 2.0 HBA's */
+		shost = scsi_host_alloc(&mpt2sas_driver_template,
+		  sizeof(struct MPT3SAS_ADAPTER));
+		if (!shost)
+			return -ENODEV;
+		ioc = shost_priv(shost);
+		memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
+		ioc->hba_mpi_version_belonged = hba_mpi_version;
+		ioc->id = mpt2_ids++;
+		sprintf(ioc->driver_name, "%s", MPT2SAS_DRIVER_NAME);
+		if (pdev->device == MPI2_MFGPAGE_DEVID_SSS6200) {
+			ioc->is_warpdrive = 1;
+			ioc->hide_ir_msg = 1;
+		} else
+			ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
+		break;
+	case MPI25_VERSION:
+		/* Use mpt3sas driver host template for SAS 3.0 HBA's */
+		shost = scsi_host_alloc(&mpt3sas_driver_template,
+		  sizeof(struct MPT3SAS_ADAPTER));
+		if (!shost)
+			return -ENODEV;
+		ioc = shost_priv(shost);
+		memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
+		ioc->hba_mpi_version_belonged = hba_mpi_version;
+		ioc->id = mpt3_ids++;
+		sprintf(ioc->driver_name, "%s", MPT3SAS_DRIVER_NAME);
+		if (pdev->revision >= SAS3_PCI_DEVICE_C0_REVISION)
+			ioc->msix96_vector = 1;
+		break;
+	default:
+		return -ENODEV;
+	}
+
 	INIT_LIST_HEAD(&ioc->list);
+	spin_lock(&gioc_lock);
 	list_add_tail(&ioc->list, &mpt3sas_ioc_list);
+	spin_unlock(&gioc_lock);
 	ioc->shost = shost;
-	ioc->id = mpt_ids++;
-	sprintf(ioc->name, "%s%d", MPT3SAS_DRIVER_NAME, ioc->id);
 	ioc->pdev = pdev;
 	ioc->scsi_io_cb_idx = scsi_io_cb_idx;
 	ioc->tm_cb_idx = tm_cb_idx;
@@ -8030,6 +8516,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds;
 	/* misc semaphores and spin locks */
 	mutex_init(&ioc->reset_in_progress_mutex);
+	/* initializing pci_access_mutex lock */
+	mutex_init(&ioc->pci_access_mutex);
 	spin_lock_init(&ioc->ioc_reset_in_progress_lock);
 	spin_lock_init(&ioc->scsi_lookup_lock);
 	spin_lock_init(&ioc->sas_device_lock);
@@ -8048,6 +8536,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	INIT_LIST_HEAD(&ioc->delayed_tr_volume_list);
 	INIT_LIST_HEAD(&ioc->reply_queue_list);
 
+	sprintf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id);
+
 	/* init shost parameters */
 	shost->max_cmd_len = 32;
 	shost->max_lun = max_lun;
@@ -8086,7 +8576,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* event thread */
 	snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
-	    "fw_event%d", ioc->id);
+	    "fw_event_%s%d", ioc->driver_name, ioc->id);
 	ioc->firmware_event_thread = alloc_ordered_workqueue(
 	    ioc->firmware_event_name, WQ_MEM_RECLAIM);
 	if (!ioc->firmware_event_thread) {
@@ -8103,6 +8593,21 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		rv = -ENODEV;
 		goto out_attach_fail;
 	}
+
+	if (ioc->is_warpdrive) {
+		if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS)
+			ioc->hide_drives = 0;
+		else if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_HIDE_ALL_DISKS)
+			ioc->hide_drives = 1;
+		else {
+			if (mpt3sas_get_num_volumes(ioc))
+				ioc->hide_drives = 1;
+			else
+				ioc->hide_drives = 0;
+		}
+	} else
+		ioc->hide_drives = 0;
+
 	rv = scsi_add_host(shost, &pdev->dev);
 	if (rv) {
 		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
@@ -8117,21 +8622,23 @@ out_add_shost_fail:
  out_attach_fail:
 	destroy_workqueue(ioc->firmware_event_thread);
  out_thread_fail:
+	spin_lock(&gioc_lock);
 	list_del(&ioc->list);
+	spin_unlock(&gioc_lock);
 	scsi_host_put(shost);
 	return rv;
 }
 
 #ifdef CONFIG_PM
 /**
- * _scsih_suspend - power management suspend main entry point
+ * scsih_suspend - power management suspend main entry point
  * @pdev: PCI device struct
  * @state: PM state change to (usually PCI_D3)
  *
  * Returns 0 success, anything else error.
  */
-static int
-_scsih_suspend(struct pci_dev *pdev, pm_message_t state)
+int
+scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -8152,13 +8659,13 @@ _scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 }
 
 /**
- * _scsih_resume - power management resume main entry point
+ * scsih_resume - power management resume main entry point
  * @pdev: PCI device struct
  *
  * Returns 0 success, anything else error.
  */
-static int
-_scsih_resume(struct pci_dev *pdev)
+int
+scsih_resume(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -8185,7 +8692,7 @@ _scsih_resume(struct pci_dev *pdev)
 #endif /* CONFIG_PM */
 
 /**
- * _scsih_pci_error_detected - Called when a PCI error is detected.
+ * scsih_pci_error_detected - Called when a PCI error is detected.
  * @pdev: PCI device struct
  * @state: PCI channel state
  *
@@ -8194,8 +8701,8 @@ _scsih_resume(struct pci_dev *pdev)
  * Return value:
  *      PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
  */
-static pci_ers_result_t
-_scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+pci_ers_result_t
+scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -8224,15 +8731,15 @@ _scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
 }
 
 /**
- * _scsih_pci_slot_reset - Called when PCI slot has been reset.
+ * scsih_pci_slot_reset - Called when PCI slot has been reset.
  * @pdev: PCI device struct
  *
  * Description: This routine is called by the pci error recovery
  * code after the PCI slot has been reset, just before we
  * should resume normal operations.
  */
-static pci_ers_result_t
-_scsih_pci_slot_reset(struct pci_dev *pdev)
+pci_ers_result_t
+scsih_pci_slot_reset(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -8261,15 +8768,15 @@ _scsih_pci_slot_reset(struct pci_dev *pdev)
 }
 
 /**
- * _scsih_pci_resume() - resume normal ops after PCI reset
+ * scsih_pci_resume() - resume normal ops after PCI reset
  * @pdev: pointer to PCI device
  *
  * Called when the error recovery driver tells us that its
  * OK to resume normal operation. Use completion to allow
  * halted scsi ops to resume.
  */
-static void
-_scsih_pci_resume(struct pci_dev *pdev)
+void
+scsih_pci_resume(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -8282,11 +8789,11 @@ _scsih_pci_resume(struct pci_dev *pdev)
 }
 
 /**
- * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
+ * scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
  * @pdev: pointer to PCI device
  */
-static pci_ers_result_t
-_scsih_pci_mmio_enabled(struct pci_dev *pdev)
+pci_ers_result_t
+scsih_pci_mmio_enabled(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -8300,61 +8807,99 @@ _scsih_pci_mmio_enabled(struct pci_dev *pdev)
 	return PCI_ERS_RESULT_NEED_RESET;
 }
 
-/* raid transport support */
-static struct raid_function_template mpt3sas_raid_functions = {
-	.cookie		= &scsih_driver_template,
-	.is_raid	= _scsih_is_raid,
-	.get_resync	= _scsih_get_resync,
-	.get_state	= _scsih_get_state,
+/*
+ * The pci device ids are defined in mpi/mpi2_cnfg.h.
+ */
+static const struct pci_device_id mpt3sas_pci_table[] = {
+	/* Spitfire ~ 2004 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Falcon ~ 2008 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Liberator ~ 2108 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Meteor ~ 2116 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Thunderbolt ~ 2208 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Mustang ~ 2308 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* SSS6200 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Fury ~ 3004 and 3008 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Invader ~ 3108 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{0}     /* Terminating entry */
 };
+MODULE_DEVICE_TABLE(pci, mpt3sas_pci_table);
 
-static struct pci_error_handlers _scsih_err_handler = {
-	.error_detected = _scsih_pci_error_detected,
-	.mmio_enabled = _scsih_pci_mmio_enabled,
-	.slot_reset =	_scsih_pci_slot_reset,
-	.resume =	_scsih_pci_resume,
+static struct pci_error_handlers _mpt3sas_err_handler = {
+	.error_detected	= scsih_pci_error_detected,
+	.mmio_enabled	= scsih_pci_mmio_enabled,
+	.slot_reset	= scsih_pci_slot_reset,
+	.resume		= scsih_pci_resume,
 };
 
-static struct pci_driver scsih_driver = {
+static struct pci_driver mpt3sas_driver = {
 	.name		= MPT3SAS_DRIVER_NAME,
-	.id_table	= scsih_pci_table,
+	.id_table	= mpt3sas_pci_table,
 	.probe		= _scsih_probe,
-	.remove		= _scsih_remove,
-	.shutdown	= _scsih_shutdown,
-	.err_handler	= &_scsih_err_handler,
+	.remove		= scsih_remove,
+	.shutdown	= scsih_shutdown,
+	.err_handler	= &_mpt3sas_err_handler,
 #ifdef CONFIG_PM
-	.suspend	= _scsih_suspend,
-	.resume		= _scsih_resume,
+	.suspend	= scsih_suspend,
+	.resume		= scsih_resume,
 #endif
 };
 
-
 /**
- * _scsih_init - main entry point for this driver.
+ * scsih_init - main entry point for this driver.
  *
  * Returns 0 success, anything else error.
  */
-static int __init
-_scsih_init(void)
+int
+scsih_init(void)
 {
-	int error;
-
-	mpt_ids = 0;
-
-	pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME,
-	    MPT3SAS_DRIVER_VERSION);
-
-	mpt3sas_transport_template =
-	    sas_attach_transport(&mpt3sas_transport_functions);
-	if (!mpt3sas_transport_template)
-		return -ENODEV;
-
-/* raid transport support */
-	mpt3sas_raid_template = raid_class_attach(&mpt3sas_raid_functions);
-	if (!mpt3sas_raid_template) {
-		sas_release_transport(mpt3sas_transport_template);
-		return -ENODEV;
-	}
+	mpt2_ids = 0;
+	mpt3_ids = 0;
 
 	mpt3sas_base_initialize_callback_handler();
 
@@ -8392,33 +8937,17 @@ _scsih_init(void)
 	tm_sas_control_cb_idx = mpt3sas_base_register_callback_handler(
 	    _scsih_sas_control_complete);
 
-	mpt3sas_ctl_init();
-
-	error = pci_register_driver(&scsih_driver);
-	if (error) {
-		/* raid transport support */
-		raid_class_release(mpt3sas_raid_template);
-		sas_release_transport(mpt3sas_transport_template);
-	}
-
-	return error;
+	return 0;
 }
 
 /**
- * _scsih_exit - exit point for this driver (when it is a module).
+ * scsih_exit - exit point for this driver (when it is a module).
  *
  * Returns 0 success, anything else error.
  */
-static void __exit
-_scsih_exit(void)
+void
+scsih_exit(void)
 {
-	pr_info("mpt3sas version %s unloading\n",
-	    MPT3SAS_DRIVER_VERSION);
-
-	mpt3sas_ctl_exit();
-
-	pci_unregister_driver(&scsih_driver);
-
 
 	mpt3sas_base_release_callback_handler(scsi_io_cb_idx);
 	mpt3sas_base_release_callback_handler(tm_cb_idx);
@@ -8434,9 +8963,86 @@ _scsih_exit(void)
 	mpt3sas_base_release_callback_handler(tm_sas_control_cb_idx);
 
 /* raid transport support */
-	raid_class_release(mpt3sas_raid_template);
+	if (hbas_to_enumerate != 1)
+		raid_class_release(mpt3sas_raid_template);
+	if (hbas_to_enumerate != 2)
+		raid_class_release(mpt2sas_raid_template);
 	sas_release_transport(mpt3sas_transport_template);
 }
 
-module_init(_scsih_init);
-module_exit(_scsih_exit);
+/**
+ * _mpt3sas_init - main entry point for this driver.
+ *
+ * Returns 0 success, anything else error.
+ */
+static int __init
+_mpt3sas_init(void)
+{
+	int error;
+
+	pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME,
+					MPT3SAS_DRIVER_VERSION);
+
+	mpt3sas_transport_template =
+	    sas_attach_transport(&mpt3sas_transport_functions);
+	if (!mpt3sas_transport_template)
+		return -ENODEV;
+
+	/* No need attach mpt3sas raid functions template
+	 * if hbas_to_enumarate value is one.
+	 */
+	if (hbas_to_enumerate != 1) {
+		mpt3sas_raid_template =
+				raid_class_attach(&mpt3sas_raid_functions);
+		if (!mpt3sas_raid_template) {
+			sas_release_transport(mpt3sas_transport_template);
+			return -ENODEV;
+		}
+	}
+
+	/* No need to attach mpt2sas raid functions template
+	 * if hbas_to_enumarate value is two
+	 */
+	if (hbas_to_enumerate != 2) {
+		mpt2sas_raid_template =
+				raid_class_attach(&mpt2sas_raid_functions);
+		if (!mpt2sas_raid_template) {
+			sas_release_transport(mpt3sas_transport_template);
+			return -ENODEV;
+		}
+	}
+
+	error = scsih_init();
+	if (error) {
+		scsih_exit();
+		return error;
+	}
+
+	mpt3sas_ctl_init(hbas_to_enumerate);
+
+	error = pci_register_driver(&mpt3sas_driver);
+	if (error)
+		scsih_exit();
+
+	return error;
+}
+
+/**
+ * _mpt3sas_exit - exit point for this driver (when it is a module).
+ *
+ */
+static void __exit
+_mpt3sas_exit(void)
+{
+	pr_info("mpt3sas version %s unloading\n",
+				MPT3SAS_DRIVER_VERSION);
+
+	pci_unregister_driver(&mpt3sas_driver);
+
+	mpt3sas_ctl_exit(hbas_to_enumerate);
+
+	scsih_exit();
+}
+
+module_init(_mpt3sas_init);
+module_exit(_mpt3sas_exit);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index 70fd019e7..ca36d7ea0 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -734,7 +734,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 	rphy->identify = mpt3sas_port->remote_identify;
 
 	if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) {
-		sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+		sas_device = mpt3sas_get_sdev_by_addr(ioc,
 				    mpt3sas_port->remote_identify.sas_address);
 		if (!sas_device) {
 			dfailprintk(ioc, printk(MPT3SAS_FMT
@@ -750,8 +750,10 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 		    ioc->name, __FILE__, __LINE__, __func__);
 	}
 
-	if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE)
+	if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) {
 		sas_device->pend_sas_rphy_add = 0;
+		sas_device_put(sas_device);
+	}
 
 	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
 		dev_printk(KERN_INFO, &rphy->dev,
@@ -1324,15 +1326,17 @@ _transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
 	int rc;
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
 	    rphy->identify.sas_address);
 	if (sas_device) {
 		*identifier = sas_device->enclosure_logical_id;
 		rc = 0;
+		sas_device_put(sas_device);
 	} else {
 		*identifier = 0;
 		rc = -ENXIO;
 	}
+
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	return rc;
 }
@@ -1352,12 +1356,14 @@ _transport_get_bay_identifier(struct sas_rphy *rphy)
 	int rc;
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
 	    rphy->identify.sas_address);
-	if (sas_device)
+	if (sas_device) {
 		rc = sas_device->slot;
-	else
+		sas_device_put(sas_device);
+	} else {
 		rc = -ENXIO;
+	}
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	return rc;
 }
diff --git a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
new file mode 100644
index 000000000..540bd5005
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
@@ -0,0 +1,344 @@
+/*
+ * Scsi Host Layer for MPT (Message Passing Technology) based controllers
+ *
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2015 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <asm/unaligned.h>
+
+#include "mpt3sas_base.h"
+
+/**
+ * _warpdrive_disable_ddio - Disable direct I/O for all the volumes
+ * @ioc: per adapter object
+ */
+static void
+_warpdrive_disable_ddio(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidVolPage1_t vol_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	struct _raid_device *raid_device;
+	u16 handle;
+	u16 ioc_status;
+	unsigned long flags;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		handle = le16_to_cpu(vol_pg1.DevHandle);
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+		if (raid_device)
+			raid_device->direct_io_enabled = 0;
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+	return;
+}
+
+
+/**
+ * mpt3sas_get_num_volumes - Get number of volumes in the ioc
+ * @ioc: per adapter object
+ */
+u8
+mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidVolPage1_t vol_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 handle;
+	u8 vol_cnt = 0;
+	u16 ioc_status;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		vol_cnt++;
+		handle = le16_to_cpu(vol_pg1.DevHandle);
+	}
+	return vol_cnt;
+}
+
+
+/**
+ * mpt3sas_init_warpdrive_properties - Set properties for warpdrive direct I/O.
+ * @ioc: per adapter object
+ * @raid_device: the raid_device object
+ */
+void
+mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	Mpi2RaidVolPage0_t *vol_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 sz;
+	u8 num_pds, count;
+	unsigned long stripe_sz, block_sz;
+	u8 stripe_exp, block_exp;
+	u64 dev_max_lba;
+
+	if (!ioc->is_warpdrive)
+		return;
+
+	if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "globally as drives are exposed\n", ioc->name);
+		return;
+	}
+	if (mpt3sas_get_num_volumes(ioc) > 1) {
+		_warpdrive_disable_ddio(ioc);
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "globally as number of drives > 1\n", ioc->name);
+		return;
+	}
+	if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
+	    &num_pds)) || !num_pds) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "Failure in computing number of drives\n", ioc->name);
+		return;
+	}
+
+	sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
+	    sizeof(Mpi2RaidVol0PhysDisk_t));
+	vol_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!vol_pg0) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "Memory allocation failure for RVPG0\n", ioc->name);
+		return;
+	}
+
+	if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "Failure in retrieving RVPG0\n", ioc->name);
+		kfree(vol_pg0);
+		return;
+	}
+
+	/*
+	 * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
+	 * assumed for WARPDRIVE, disable direct I/O
+	 */
+	if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
+		pr_warn(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "for the drive with handle(0x%04x): num_mem=%d, "
+		    "max_mem_allowed=%d\n", ioc->name, raid_device->handle,
+		    num_pds, MPT_MAX_WARPDRIVE_PDS);
+		kfree(vol_pg0);
+		return;
+	}
+	for (count = 0; count < num_pds; count++) {
+		if (mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+		    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
+		    vol_pg0->PhysDisk[count].PhysDiskNum) ||
+		    pd_pg0.DevHandle == MPT3SAS_INVALID_DEVICE_HANDLE) {
+			pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
+			    "disabled for the drive with handle(0x%04x) member"
+			    "handle retrieval failed for member number=%d\n",
+			    ioc->name, raid_device->handle,
+			    vol_pg0->PhysDisk[count].PhysDiskNum);
+			goto out_error;
+		}
+		/* Disable direct I/O if member drive lba exceeds 4 bytes */
+		dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA);
+		if (dev_max_lba >> 32) {
+			pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
+			    "disabled for the drive with handle(0x%04x) member"
+			    " handle (0x%04x) unsupported max lba 0x%016llx\n",
+			    ioc->name, raid_device->handle,
+			    le16_to_cpu(pd_pg0.DevHandle),
+			    (unsigned long long)dev_max_lba);
+			goto out_error;
+		}
+
+		raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
+	}
+
+	/*
+	 * Assumption for WD: Direct I/O is not supported if the volume is
+	 * not RAID0
+	 */
+	if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "for the drive with handle(0x%04x): type=%d, "
+		    "s_sz=%uK, blk_size=%u\n", ioc->name,
+		    raid_device->handle, raid_device->volume_type,
+		    (le32_to_cpu(vol_pg0->StripeSize) *
+		    le16_to_cpu(vol_pg0->BlockSize)) / 1024,
+		    le16_to_cpu(vol_pg0->BlockSize));
+		goto out_error;
+	}
+
+	stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+	stripe_exp = find_first_bit(&stripe_sz, 32);
+	if (stripe_exp == 32) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		"for the drive with handle(0x%04x) invalid stripe sz %uK\n",
+		    ioc->name, raid_device->handle,
+		    (le32_to_cpu(vol_pg0->StripeSize) *
+		    le16_to_cpu(vol_pg0->BlockSize)) / 1024);
+		goto out_error;
+	}
+	raid_device->stripe_exponent = stripe_exp;
+	block_sz = le16_to_cpu(vol_pg0->BlockSize);
+	block_exp = find_first_bit(&block_sz, 16);
+	if (block_exp == 16) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "for the drive with handle(0x%04x) invalid block sz %u\n",
+		    ioc->name, raid_device->handle,
+		    le16_to_cpu(vol_pg0->BlockSize));
+		goto out_error;
+	}
+	raid_device->block_exponent = block_exp;
+	raid_device->direct_io_enabled = 1;
+
+	pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is Enabled for the drive"
+	    " with handle(0x%04x)\n", ioc->name, raid_device->handle);
+	/*
+	 * WARPDRIVE: Though the following fields are not used for direct IO,
+	 * stored for future purpose:
+	 */
+	raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
+	raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+	raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
+
+
+	kfree(vol_pg0);
+	return;
+
+out_error:
+	raid_device->direct_io_enabled = 0;
+	for (count = 0; count < num_pds; count++)
+		raid_device->pd_handle[count] = 0;
+	kfree(vol_pg0);
+	return;
+}
+
+/**
+ * mpt3sas_scsi_direct_io_get - returns direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns the smid stored scmd pointer.
+ */
+inline u8
+mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	return ioc->scsi_lookup[smid - 1].direct_io;
+}
+
+/**
+ * mpt3sas_scsi_direct_io_set - sets direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @direct_io: Zero or non-zero value to set in the direct_io flag
+ *
+ * Returns Nothing.
+ */
+inline void
+mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
+{
+	ioc->scsi_lookup[smid - 1].direct_io = direct_io;
+}
+
+/**
+ * mpt3sas_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @raid_device: pointer to raid device data structure
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ * @smid: system request message index
+ *
+ * Returns nothing
+ */
+void
+mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+	u16 smid)
+{
+	sector_t v_lba, p_lba, stripe_off, column, io_size;
+	u32 stripe_sz, stripe_exp;
+	u8 num_pds, cmd = scmd->cmnd[0];
+
+	if (cmd != READ_10 && cmd != WRITE_10 &&
+	    cmd != READ_16 && cmd != WRITE_16)
+		return;
+
+	if (cmd == READ_10 || cmd == WRITE_10)
+		v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]);
+	else
+		v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]);
+
+	io_size = scsi_bufflen(scmd) >> raid_device->block_exponent;
+
+	if (v_lba + io_size - 1 > raid_device->max_lba)
+		return;
+
+	stripe_sz = raid_device->stripe_sz;
+	stripe_exp = raid_device->stripe_exponent;
+	stripe_off = v_lba & (stripe_sz - 1);
+
+	/* Return unless IO falls within a stripe */
+	if (stripe_off + io_size > stripe_sz)
+		return;
+
+	num_pds = raid_device->num_pds;
+	p_lba = v_lba >> stripe_exp;
+	column = sector_div(p_lba, num_pds);
+	p_lba = (p_lba << stripe_exp) + stripe_off;
+	mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]);
+
+	if (cmd == READ_10 || cmd == WRITE_10)
+		put_unaligned_be32(lower_32_bits(p_lba),
+				   &mpi_request->CDB.CDB32[2]);
+	else
+		put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]);
+
+	mpt3sas_scsi_direct_io_set(ioc, smid, 1);
+}
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index e2d555c1b..675e7fab0 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -65,7 +65,6 @@ static struct scsi_host_template mvs_sht = {
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 	.shost_attrs		= mvst_host_attrs,
-	.use_blk_tags		= 1,
 	.track_queue_depth	= 1,
 };
 
@@ -641,9 +640,9 @@ static void mvs_pci_remove(struct pci_dev *pdev)
 	tasklet_kill(&((struct mvs_prv_info *)sha->lldd_ha)->mv_tasklet);
 #endif
 
+	scsi_remove_host(mvi->shost);
 	sas_unregister_ha(sha);
 	sas_remove_host(mvi->shost);
-	scsi_remove_host(mvi->shost);
 
 	MVS_CHIP_DISP->interrupt_disable(mvi);
 	free_irq(mvi->pdev->irq, sha);
@@ -759,7 +758,7 @@ mvs_store_interrupt_coalescing(struct device *cdev,
 			struct device_attribute *attr,
 			const char *buffer, size_t size)
 {
-	int val = 0;
+	unsigned int val = 0;
 	struct mvs_info *mvi = NULL;
 	struct Scsi_Host *shost = class_to_shost(cdev);
 	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
@@ -767,7 +766,7 @@ mvs_store_interrupt_coalescing(struct device *cdev,
 	if (buffer == NULL)
 		return size;
 
-	if (sscanf(buffer, "%d", &val) != 1)
+	if (sscanf(buffer, "%u", &val) != 1)
 		return -EINVAL;
 
 	if (val >= 0x10000) {
diff --git a/drivers/scsi/mvumi.c b/drivers/scsi/mvumi.c
index 3e6b86675..02360de6b 100644
--- a/drivers/scsi/mvumi.c
+++ b/drivers/scsi/mvumi.c
@@ -31,6 +31,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/ktime.h>
 #include <linux/blkdev.h>
 #include <linux/io.h>
 #include <scsi/scsi.h>
@@ -858,8 +859,8 @@ static void mvumi_hs_build_page(struct mvumi_hba *mhba,
 	struct mvumi_hs_page2 *hs_page2;
 	struct mvumi_hs_page4 *hs_page4;
 	struct mvumi_hs_page3 *hs_page3;
-	struct timeval time;
-	unsigned int local_time;
+	u64 time;
+	u64 local_time;
 
 	switch (hs_header->page_code) {
 	case HS_PAGE_HOST_INFO:
@@ -877,9 +878,8 @@ static void mvumi_hs_build_page(struct mvumi_hba *mhba,
 		hs_page2->slot_number = 0;
 		hs_page2->intr_level = 0;
 		hs_page2->intr_vector = 0;
-		do_gettimeofday(&time);
-		local_time = (unsigned int) (time.tv_sec -
-						(sys_tz.tz_minuteswest * 60));
+		time = ktime_get_real_seconds();
+		local_time = (time - (sys_tz.tz_minuteswest * 60));
 		hs_page2->seconds_since1970 = local_time;
 		hs_header->checksum = mvumi_calculate_checksum(hs_header,
 						hs_header->frame_length);
diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
index f14ec6e04..199527dba 100644
--- a/drivers/scsi/pm8001/pm8001_defs.h
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -51,6 +51,8 @@ enum chip_flavors {
 	chip_8076,
 	chip_8077,
 	chip_8006,
+	chip_8070,
+	chip_8072
 };
 
 enum phy_speed {
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 5c0356fb6..062ab34b8 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -58,6 +58,8 @@ static const struct pm8001_chip_info pm8001_chips[] = {
 	[chip_8076] = {0,  16, &pm8001_80xx_dispatch,},
 	[chip_8077] = {0,  16, &pm8001_80xx_dispatch,},
 	[chip_8006] = {0,  16, &pm8001_80xx_dispatch,},
+	[chip_8070] = {0,  8, &pm8001_80xx_dispatch,},
+	[chip_8072] = {0,  16, &pm8001_80xx_dispatch,},
 };
 static int pm8001_id;
 
@@ -88,7 +90,6 @@ static struct scsi_host_template pm8001_sht = {
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 	.shost_attrs		= pm8001_host_attrs,
-	.use_blk_tags		= 1,
 	.track_queue_depth	= 1,
 };
 
@@ -480,7 +481,8 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
 
 #ifdef PM8001_USE_TASKLET
 	/* Tasklet for non msi-x interrupt handler */
-	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+	if ((!pdev->msix_cap || !pci_msi_enabled())
+	    || (pm8001_ha->chip_id == chip_8001))
 		tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
 			(unsigned long)&(pm8001_ha->irq_vector[0]));
 	else
@@ -634,6 +636,11 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 			payload.minor_function = 0;
 			payload.length = 128;
 		}
+	} else if ((pm8001_ha->chip_id == chip_8070 ||
+			pm8001_ha->chip_id == chip_8072) &&
+			pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
+		payload.minor_function = 4;
+		payload.length = 4096;
 	} else {
 		payload.minor_function = 1;
 		payload.length = 4096;
@@ -660,6 +667,11 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 			else if (deviceid == 0x0042)
 				pm8001_ha->sas_addr[j] =
 					payload.func_specific[0x010 + i];
+		} else if ((pm8001_ha->chip_id == chip_8070 ||
+				pm8001_ha->chip_id == chip_8072) &&
+				pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
+			pm8001_ha->sas_addr[j] =
+					payload.func_specific[0x010 + i];
 		} else
 			pm8001_ha->sas_addr[j] =
 					payload.func_specific[0x804 + i];
@@ -720,6 +732,153 @@ static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
 	return 0;
 }
 
+struct pm8001_mpi3_phy_pg_trx_config {
+	u32 LaneLosCfg;
+	u32 LanePgaCfg1;
+	u32 LanePisoCfg1;
+	u32 LanePisoCfg2;
+	u32 LanePisoCfg3;
+	u32 LanePisoCfg4;
+	u32 LanePisoCfg5;
+	u32 LanePisoCfg6;
+	u32 LaneBctCtrl;
+};
+
+/**
+ * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings
+ * @pm8001_ha : our adapter
+ * @phycfg : PHY config page to populate
+ */
+static
+void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_mpi3_phy_pg_trx_config *phycfg)
+{
+	phycfg->LaneLosCfg   = 0x00000132;
+	phycfg->LanePgaCfg1  = 0x00203949;
+	phycfg->LanePisoCfg1 = 0x000000FF;
+	phycfg->LanePisoCfg2 = 0xFF000001;
+	phycfg->LanePisoCfg3 = 0xE7011300;
+	phycfg->LanePisoCfg4 = 0x631C40C0;
+	phycfg->LanePisoCfg5 = 0xF8102036;
+	phycfg->LanePisoCfg6 = 0xF74A1000;
+	phycfg->LaneBctCtrl  = 0x00FB33F8;
+}
+
+/**
+ * pm8001_get_external_phy_settings : Retrieves the external PHY settings
+ * @pm8001_ha : our adapter
+ * @phycfg : PHY config page to populate
+ */
+static
+void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha,
+		struct pm8001_mpi3_phy_pg_trx_config *phycfg)
+{
+	phycfg->LaneLosCfg   = 0x00000132;
+	phycfg->LanePgaCfg1  = 0x00203949;
+	phycfg->LanePisoCfg1 = 0x000000FF;
+	phycfg->LanePisoCfg2 = 0xFF000001;
+	phycfg->LanePisoCfg3 = 0xE7011300;
+	phycfg->LanePisoCfg4 = 0x63349140;
+	phycfg->LanePisoCfg5 = 0xF8102036;
+	phycfg->LanePisoCfg6 = 0xF80D9300;
+	phycfg->LaneBctCtrl  = 0x00FB33F8;
+}
+
+/**
+ * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext
+ * @pm8001_ha : our adapter
+ * @phymask : The PHY mask
+ */
+static
+void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
+{
+	switch (pm8001_ha->pdev->subsystem_device) {
+	case 0x0070: /* H1280 - 8 external 0 internal */
+	case 0x0072: /* H12F0 - 16 external 0 internal */
+		*phymask = 0x0000;
+		break;
+
+	case 0x0071: /* H1208 - 0 external 8 internal */
+	case 0x0073: /* H120F - 0 external 16 internal */
+		*phymask = 0xFFFF;
+		break;
+
+	case 0x0080: /* H1244 - 4 external 4 internal */
+		*phymask = 0x00F0;
+		break;
+
+	case 0x0081: /* H1248 - 4 external 8 internal */
+		*phymask = 0x0FF0;
+		break;
+
+	case 0x0082: /* H1288 - 8 external 8 internal */
+		*phymask = 0xFF00;
+		break;
+
+	default:
+		PM8001_INIT_DBG(pm8001_ha,
+			pm8001_printk("Unknown subsystem device=0x%.04x",
+				pm8001_ha->pdev->subsystem_device));
+	}
+}
+
+/**
+ * pm8001_set_phy_settings_ven_117c_12Gb : Configure ATTO 12Gb PHY settings
+ * @pm8001_ha : our adapter
+ */
+static
+int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha)
+{
+	struct pm8001_mpi3_phy_pg_trx_config phycfg_int;
+	struct pm8001_mpi3_phy_pg_trx_config phycfg_ext;
+	int phymask = 0;
+	int i = 0;
+
+	memset(&phycfg_int, 0, sizeof(phycfg_int));
+	memset(&phycfg_ext, 0, sizeof(phycfg_ext));
+
+	pm8001_get_internal_phy_settings(pm8001_ha, &phycfg_int);
+	pm8001_get_external_phy_settings(pm8001_ha, &phycfg_ext);
+	pm8001_get_phy_mask(pm8001_ha, &phymask);
+
+	for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+		if (phymask & (1 << i)) {/* Internal PHY */
+			pm8001_set_phy_profile_single(pm8001_ha, i,
+					sizeof(phycfg_int) / sizeof(u32),
+					(u32 *)&phycfg_int);
+
+		} else { /* External PHY */
+			pm8001_set_phy_profile_single(pm8001_ha, i,
+					sizeof(phycfg_ext) / sizeof(u32),
+					(u32 *)&phycfg_ext);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID.
+ * @pm8001_ha : our hba.
+ */
+static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
+{
+	switch (pm8001_ha->pdev->subsystem_vendor) {
+	case PCI_VENDOR_ID_ATTO:
+		if (pm8001_ha->pdev->device == 0x0042) /* 6Gb */
+			return 0;
+		else
+			return pm8001_set_phy_settings_ven_117c_12G(pm8001_ha);
+
+	case PCI_VENDOR_ID_ADAPTEC2:
+	case 0:
+		return 0;
+
+	default:
+		return pm8001_get_phy_settings_info(pm8001_ha);
+	}
+}
+
 #ifdef PM8001_USE_MSIX
 /**
  * pm8001_setup_msix - enable MSI-X interrupt
@@ -792,7 +951,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 	pdev = pm8001_ha->pdev;
 
 #ifdef PM8001_USE_MSIX
-	if (pdev->msix_cap)
+	if (pdev->msix_cap && pci_msi_enabled())
 		return pm8001_setup_msix(pm8001_ha);
 	else {
 		PM8001_INIT_DBG(pm8001_ha,
@@ -803,6 +962,8 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 
 intx:
 	/* initialize the INT-X interrupt */
+	pm8001_ha->irq_vector[0].irq_id = 0;
+	pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
 	rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
 		DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost));
 	return rc;
@@ -902,12 +1063,9 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
 
 	pm8001_init_sas_add(pm8001_ha);
 	/* phy setting support for motherboard controller */
-	if (pdev->subsystem_vendor != PCI_VENDOR_ID_ADAPTEC2 &&
-		pdev->subsystem_vendor != 0) {
-		rc = pm8001_get_phy_settings_info(pm8001_ha);
-		if (rc)
-			goto err_out_shost;
-	}
+	if (pm8001_configure_phy_settings(pm8001_ha))
+		goto err_out_shost;
+
 	pm8001_post_sas_ha_init(shost, chip);
 	rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
 	if (rc)
@@ -937,10 +1095,10 @@ static void pm8001_pci_remove(struct pci_dev *pdev)
 	struct pm8001_hba_info *pm8001_ha;
 	int i, j;
 	pm8001_ha = sha->lldd_ha;
+	scsi_remove_host(pm8001_ha->shost);
 	sas_unregister_ha(sha);
 	sas_remove_host(pm8001_ha->shost);
 	list_del(&pm8001_ha->list);
-	scsi_remove_host(pm8001_ha->shost);
 	PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
 	PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 
@@ -956,7 +1114,8 @@ static void pm8001_pci_remove(struct pci_dev *pdev)
 #endif
 #ifdef PM8001_USE_TASKLET
 	/* For non-msix and msix interrupts */
-	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+	if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+	    (pm8001_ha->chip_id == chip_8001))
 		tasklet_kill(&pm8001_ha->tasklet[0]);
 	else
 		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
@@ -1005,7 +1164,8 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 #endif
 #ifdef PM8001_USE_TASKLET
 	/* For non-msix and msix interrupts */
-	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+	if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+	    (pm8001_ha->chip_id == chip_8001))
 		tasklet_kill(&pm8001_ha->tasklet[0]);
 	else
 		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
@@ -1074,7 +1234,8 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
 		goto err_out_disable;
 #ifdef PM8001_USE_TASKLET
 	/*  Tasklet for non msi-x interrupt handler */
-	if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+	if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+	    (pm8001_ha->chip_id == chip_8001))
 		tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
 			(unsigned long)&(pm8001_ha->irq_vector[0]));
 	else
@@ -1087,6 +1248,19 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
 		for (i = 1; i < pm8001_ha->number_of_intr; i++)
 			PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
 	}
+
+	/* Chip documentation for the 8070 and 8072 SPCv    */
+	/* states that a 500ms minimum delay is required    */
+	/* before issuing commands.  Otherwise, the firmare */
+	/* will enter an unrecoverable state.               */
+
+	if (pm8001_ha->chip_id == chip_8070 ||
+		pm8001_ha->chip_id == chip_8072) {
+		mdelay(500);
+	}
+
+	/* Spin up the PHYs */
+
 	pm8001_ha->flags = PM8001F_RUN_TIME;
 	for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
 		pm8001_ha->phy[i].enable_completion = &completion;
@@ -1165,6 +1339,20 @@ static struct pci_device_id pm8001_pci_table[] = {
 		PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
 	{ PCI_VENDOR_ID_ADAPTEC2, 0x8074,
 		PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
+	{ PCI_VENDOR_ID_ATTO, 0x8070,
+		PCI_VENDOR_ID_ATTO, 0x0070, 0, 0, chip_8070 },
+	{ PCI_VENDOR_ID_ATTO, 0x8070,
+		PCI_VENDOR_ID_ATTO, 0x0071, 0, 0, chip_8070 },
+	{ PCI_VENDOR_ID_ATTO, 0x8072,
+		PCI_VENDOR_ID_ATTO, 0x0072, 0, 0, chip_8072 },
+	{ PCI_VENDOR_ID_ATTO, 0x8072,
+		PCI_VENDOR_ID_ATTO, 0x0073, 0, 0, chip_8072 },
+	{ PCI_VENDOR_ID_ATTO, 0x8070,
+		PCI_VENDOR_ID_ATTO, 0x0080, 0, 0, chip_8070 },
+	{ PCI_VENDOR_ID_ATTO, 0x8072,
+		PCI_VENDOR_ID_ATTO, 0x0081, 0, 0, chip_8072 },
+	{ PCI_VENDOR_ID_ATTO, 0x8072,
+		PCI_VENDOR_ID_ATTO, 0x0082, 0, 0, chip_8072 },
 	{} /* terminate list */
 };
 
@@ -1220,7 +1408,7 @@ MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
 MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
 MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
 MODULE_DESCRIPTION(
-		"PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077 "
+		"PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077/8070/8072 "
 		"SAS/SATA controller driver");
 MODULE_VERSION(DRV_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index e2e97db38..6628cc383 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -106,7 +106,9 @@ do {						\
 #define DEV_IS_EXPANDER(type)	((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
 #define IS_SPCV_12G(dev)	((dev->device == 0X8074)		\
 				|| (dev->device == 0X8076)		\
-				|| (dev->device == 0X8077))
+				|| (dev->device == 0X8077)		\
+				|| (dev->device == 0X8070)		\
+				|| (dev->device == 0X8072))
 
 #define PM8001_NAME_LENGTH		32/* generic length of strings */
 extern struct list_head hba_list;
@@ -708,6 +710,8 @@ int pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha);
 int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
 void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
 	u32 length, u8 *buf);
+void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha,
+		u32 phy, u32 length, u32 *buf);
 int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
 ssize_t pm80xx_get_fatal_dump(struct device *cdev,
 		struct device_attribute *attr, char *buf);
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 9a389f150..eb4fee61d 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1267,6 +1267,8 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
 		/* check iButton feature support for motherboard controller */
 		if (pm8001_ha->pdev->subsystem_vendor !=
 			PCI_VENDOR_ID_ADAPTEC2 &&
+			pm8001_ha->pdev->subsystem_vendor !=
+			PCI_VENDOR_ID_ATTO &&
 			pm8001_ha->pdev->subsystem_vendor != 0) {
 			ibutton0 = pm8001_cr32(pm8001_ha, 0,
 					MSGU_HOST_SCRATCH_PAD_6);
@@ -4576,6 +4578,38 @@ void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
 	}
 	PM8001_INIT_DBG(pm8001_ha, pm8001_printk("phy settings completed\n"));
 }
+
+void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha,
+		u32 phy, u32 length, u32 *buf)
+{
+	u32 tag, opc;
+	int rc, i;
+	struct set_phy_profile_req payload;
+	struct inbound_queue_table *circularQ;
+
+	memset(&payload, 0, sizeof(payload));
+
+	rc = pm8001_tag_alloc(pm8001_ha, &tag);
+	if (rc)
+		PM8001_INIT_DBG(pm8001_ha, pm8001_printk("Invalid tag"));
+
+	circularQ = &pm8001_ha->inbnd_q_tbl[0];
+	opc = OPC_INB_SET_PHY_PROFILE;
+
+	payload.tag = cpu_to_le32(tag);
+	payload.ppc_phyid = (((SAS_PHY_ANALOG_SETTINGS_PAGE & 0xF) << 8)
+				| (phy & 0xFF));
+
+	for (i = 0; i < length; i++)
+		payload.reserved[i] = cpu_to_le32(*(buf + i));
+
+	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+	if (rc)
+		pm8001_tag_free(pm8001_ha, tag);
+
+	PM8001_INIT_DBG(pm8001_ha,
+		pm8001_printk("PHY %d settings applied", phy));
+}
 const struct pm8001_dispatch pm8001_80xx_dispatch = {
 	.name			= "pmc80xx",
 	.chip_init		= pm80xx_chip_init,
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index ed31d8cc6..b2a88200f 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -45,6 +45,7 @@
 #include <asm/processor.h>
 #include <linux/libata.h>
 #include <linux/mutex.h>
+#include <linux/ktime.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
@@ -4254,7 +4255,6 @@ static struct scsi_host_template pmcraid_host_template = {
 	.use_clustering = ENABLE_CLUSTERING,
 	.shost_attrs = pmcraid_host_attrs,
 	.proc_name = PMCRAID_DRIVER_NAME,
-	.use_blk_tags = 1,
 };
 
 /*
@@ -5563,11 +5563,9 @@ static void pmcraid_set_timestamp(struct pmcraid_cmd *cmd)
 	__be32 time_stamp_len = cpu_to_be32(PMCRAID_TIMESTAMP_LEN);
 	struct pmcraid_ioadl_desc *ioadl = ioarcb->add_data.u.ioadl;
 
-	struct timeval tv;
 	__le64 timestamp;
 
-	do_gettimeofday(&tv);
-	timestamp = tv.tv_sec * 1000;
+	timestamp = ktime_get_real_seconds() * 1000;
 
 	pinstance->timestamp_data->timestamp[0] = (__u8)(timestamp);
 	pinstance->timestamp_data->timestamp[1] = (__u8)((timestamp) >> 8);
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index eb0cc5475..b6b4cfdd7 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -433,7 +433,7 @@ qla82xx_pci_get_crb_addr_2M(struct qla_hw_data *ha, ulong off_in,
 	if (off_in < QLA82XX_PCI_CRBSPACE)
 		return -1;
 
-	*off_out = (void __iomem *)(off_in - QLA82XX_PCI_CRBSPACE);
+	off_in -= QLA82XX_PCI_CRBSPACE;
 
 	/* Try direct map */
 	m = &crb_128M_2M_map[CRB_BLK(off_in)].sub_block[CRB_SUBBLK(off_in)];
@@ -443,6 +443,7 @@ qla82xx_pci_get_crb_addr_2M(struct qla_hw_data *ha, ulong off_in,
 		return 0;
 	}
 	/* Not in direct map, use crb window */
+	*off_out = (void __iomem *)off_in;
 	return 1;
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index df307f4d3..25a8f470d 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -267,7 +267,6 @@ struct scsi_host_template qla2xxx_driver_template = {
 	.shost_attrs		= qla2x00_host_attrs,
 
 	.supported_mode		= MODE_INITIATOR,
-	.use_blk_tags		= 1,
 	.track_queue_depth	= 1,
 };
 
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index ac65cb7b4..81af294f1 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -43,8 +43,6 @@
 #include <scsi/scsi_cmnd.h>
 #include <target/target_core_base.h>
 #include <target/target_core_fabric.h>
-#include <target/target_core_fabric_configfs.h>
-#include <target/configfs_macros.h>
 
 #include "qla_def.h"
 #include "qla_target.h"
@@ -729,23 +727,23 @@ static int tcm_qla2xxx_init_nodeacl(struct se_node_acl *se_nacl,
 
 #define DEF_QLA_TPG_ATTRIB(name)					\
 									\
-static ssize_t tcm_qla2xxx_tpg_attrib_show_##name(			\
-	struct se_portal_group *se_tpg,					\
-	char *page)							\
+static ssize_t tcm_qla2xxx_tpg_attrib_##name##_show(			\
+		struct config_item *item, char *page)			\
 {									\
+	struct se_portal_group *se_tpg = attrib_to_tpg(item);		\
 	struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg,		\
 			struct tcm_qla2xxx_tpg, se_tpg);		\
 									\
 	return sprintf(page, "%u\n", tpg->tpg_attrib.name);	\
 }									\
 									\
-static ssize_t tcm_qla2xxx_tpg_attrib_store_##name(			\
-	struct se_portal_group *se_tpg,					\
-	const char *page,						\
-	size_t count)							\
+static ssize_t tcm_qla2xxx_tpg_attrib_##name##_store(			\
+		struct config_item *item, const char *page, size_t count) \
 {									\
+	struct se_portal_group *se_tpg = attrib_to_tpg(item);		\
 	struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg,		\
 			struct tcm_qla2xxx_tpg, se_tpg);		\
+	struct tcm_qla2xxx_tpg_attrib *a = &tpg->tpg_attrib;		\
 	unsigned long val;						\
 	int ret;							\
 									\
@@ -755,81 +753,39 @@ static ssize_t tcm_qla2xxx_tpg_attrib_store_##name(			\
 				" ret: %d\n", ret);			\
 		return -EINVAL;						\
 	}								\
-	ret = tcm_qla2xxx_set_attrib_##name(tpg, val);			\
-									\
-	return (!ret) ? count : -EINVAL;				\
-}
-
-#define DEF_QLA_TPG_ATTR_BOOL(_name)					\
-									\
-static int tcm_qla2xxx_set_attrib_##_name(				\
-	struct tcm_qla2xxx_tpg *tpg,					\
-	unsigned long val)						\
-{									\
-	struct tcm_qla2xxx_tpg_attrib *a = &tpg->tpg_attrib;		\
 									\
 	if ((val != 0) && (val != 1)) {					\
 		pr_err("Illegal boolean value %lu\n", val);		\
 		return -EINVAL;						\
 	}								\
 									\
-	a->_name = val;							\
-	return 0;							\
-}
-
-#define QLA_TPG_ATTR(_name, _mode) \
-	TF_TPG_ATTRIB_ATTR(tcm_qla2xxx, _name, _mode);
+	a->name = val;							\
+									\
+	return count;							\
+}									\
+CONFIGFS_ATTR(tcm_qla2xxx_tpg_attrib_, name)
 
-/*
- * Define tcm_qla2xxx_tpg_attrib_s_generate_node_acls
- */
-DEF_QLA_TPG_ATTR_BOOL(generate_node_acls);
 DEF_QLA_TPG_ATTRIB(generate_node_acls);
-QLA_TPG_ATTR(generate_node_acls, S_IRUGO | S_IWUSR);
-
-/*
- Define tcm_qla2xxx_attrib_s_cache_dynamic_acls
- */
-DEF_QLA_TPG_ATTR_BOOL(cache_dynamic_acls);
 DEF_QLA_TPG_ATTRIB(cache_dynamic_acls);
-QLA_TPG_ATTR(cache_dynamic_acls, S_IRUGO | S_IWUSR);
-
-/*
- * Define tcm_qla2xxx_tpg_attrib_s_demo_mode_write_protect
- */
-DEF_QLA_TPG_ATTR_BOOL(demo_mode_write_protect);
 DEF_QLA_TPG_ATTRIB(demo_mode_write_protect);
-QLA_TPG_ATTR(demo_mode_write_protect, S_IRUGO | S_IWUSR);
-
-/*
- * Define tcm_qla2xxx_tpg_attrib_s_prod_mode_write_protect
- */
-DEF_QLA_TPG_ATTR_BOOL(prod_mode_write_protect);
 DEF_QLA_TPG_ATTRIB(prod_mode_write_protect);
-QLA_TPG_ATTR(prod_mode_write_protect, S_IRUGO | S_IWUSR);
-
-/*
- * Define tcm_qla2xxx_tpg_attrib_s_demo_mode_login_only
- */
-DEF_QLA_TPG_ATTR_BOOL(demo_mode_login_only);
 DEF_QLA_TPG_ATTRIB(demo_mode_login_only);
-QLA_TPG_ATTR(demo_mode_login_only, S_IRUGO | S_IWUSR);
 
 static struct configfs_attribute *tcm_qla2xxx_tpg_attrib_attrs[] = {
-	&tcm_qla2xxx_tpg_attrib_generate_node_acls.attr,
-	&tcm_qla2xxx_tpg_attrib_cache_dynamic_acls.attr,
-	&tcm_qla2xxx_tpg_attrib_demo_mode_write_protect.attr,
-	&tcm_qla2xxx_tpg_attrib_prod_mode_write_protect.attr,
-	&tcm_qla2xxx_tpg_attrib_demo_mode_login_only.attr,
+	&tcm_qla2xxx_tpg_attrib_attr_generate_node_acls,
+	&tcm_qla2xxx_tpg_attrib_attr_cache_dynamic_acls,
+	&tcm_qla2xxx_tpg_attrib_attr_demo_mode_write_protect,
+	&tcm_qla2xxx_tpg_attrib_attr_prod_mode_write_protect,
+	&tcm_qla2xxx_tpg_attrib_attr_demo_mode_login_only,
 	NULL,
 };
 
 /* End items for tcm_qla2xxx_tpg_attrib_cit */
 
-static ssize_t tcm_qla2xxx_tpg_show_enable(
-	struct se_portal_group *se_tpg,
-	char *page)
+static ssize_t tcm_qla2xxx_tpg_enable_show(struct config_item *item,
+		char *page)
 {
+	struct se_portal_group *se_tpg = to_tpg(item);
 	struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg,
 			struct tcm_qla2xxx_tpg, se_tpg);
 
@@ -865,11 +821,10 @@ static void tcm_qla2xxx_undepend_tpg(struct work_struct *work)
 	complete(&base_tpg->tpg_base_comp);
 }
 
-static ssize_t tcm_qla2xxx_tpg_store_enable(
-	struct se_portal_group *se_tpg,
-	const char *page,
-	size_t count)
+static ssize_t tcm_qla2xxx_tpg_enable_store(struct config_item *item,
+		const char *page, size_t count)
 {
+	struct se_portal_group *se_tpg = to_tpg(item);
 	struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg,
 			struct tcm_qla2xxx_tpg, se_tpg);
 	unsigned long op;
@@ -909,22 +864,16 @@ static ssize_t tcm_qla2xxx_tpg_store_enable(
 	return count;
 }
 
-TF_TPG_BASE_ATTR(tcm_qla2xxx, enable, S_IRUGO | S_IWUSR);
-
-static ssize_t tcm_qla2xxx_tpg_show_dynamic_sessions(
-	struct se_portal_group *se_tpg,
-	char *page)
+static ssize_t tcm_qla2xxx_tpg_dynamic_sessions_show(struct config_item *item,
+		char *page)
 {
-	return target_show_dynamic_sessions(se_tpg, page);
+	return target_show_dynamic_sessions(to_tpg(item), page);
 }
 
-TF_TPG_BASE_ATTR_RO(tcm_qla2xxx, dynamic_sessions);
-
-static ssize_t tcm_qla2xxx_tpg_store_fabric_prot_type(
-	struct se_portal_group *se_tpg,
-	const char *page,
-	size_t count)
+static ssize_t tcm_qla2xxx_tpg_fabric_prot_type_store(struct config_item *item,
+		const char *page, size_t count)
 {
+	struct se_portal_group *se_tpg = to_tpg(item);
 	struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg,
 				struct tcm_qla2xxx_tpg, se_tpg);
 	unsigned long val;
@@ -943,21 +892,24 @@ static ssize_t tcm_qla2xxx_tpg_store_fabric_prot_type(
 	return count;
 }
 
-static ssize_t tcm_qla2xxx_tpg_show_fabric_prot_type(
-	struct se_portal_group *se_tpg,
-	char *page)
+static ssize_t tcm_qla2xxx_tpg_fabric_prot_type_show(struct config_item *item,
+		char *page)
 {
+	struct se_portal_group *se_tpg = to_tpg(item);
 	struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg,
 				struct tcm_qla2xxx_tpg, se_tpg);
 
 	return sprintf(page, "%d\n", tpg->tpg_attrib.fabric_prot_type);
 }
-TF_TPG_BASE_ATTR(tcm_qla2xxx, fabric_prot_type, S_IRUGO | S_IWUSR);
+
+CONFIGFS_ATTR(tcm_qla2xxx_tpg_, enable);
+CONFIGFS_ATTR_RO(tcm_qla2xxx_tpg_, dynamic_sessions);
+CONFIGFS_ATTR(tcm_qla2xxx_tpg_, fabric_prot_type);
 
 static struct configfs_attribute *tcm_qla2xxx_tpg_attrs[] = {
-	&tcm_qla2xxx_tpg_enable.attr,
-	&tcm_qla2xxx_tpg_dynamic_sessions.attr,
-	&tcm_qla2xxx_tpg_fabric_prot_type.attr,
+	&tcm_qla2xxx_tpg_attr_enable,
+	&tcm_qla2xxx_tpg_attr_dynamic_sessions,
+	&tcm_qla2xxx_tpg_attr_fabric_prot_type,
 	NULL,
 };
 
@@ -1030,18 +982,16 @@ static void tcm_qla2xxx_drop_tpg(struct se_portal_group *se_tpg)
 	kfree(tpg);
 }
 
-static ssize_t tcm_qla2xxx_npiv_tpg_show_enable(
-	struct se_portal_group *se_tpg,
-	char *page)
+static ssize_t tcm_qla2xxx_npiv_tpg_enable_show(struct config_item *item,
+		char *page)
 {
-	return tcm_qla2xxx_tpg_show_enable(se_tpg, page);
+	return tcm_qla2xxx_tpg_enable_show(item, page);
 }
 
-static ssize_t tcm_qla2xxx_npiv_tpg_store_enable(
-	struct se_portal_group *se_tpg,
-	const char *page,
-	size_t count)
+static ssize_t tcm_qla2xxx_npiv_tpg_enable_store(struct config_item *item,
+		const char *page, size_t count)
 {
+	struct se_portal_group *se_tpg = to_tpg(item);
 	struct se_wwn *se_wwn = se_tpg->se_tpg_wwn;
 	struct tcm_qla2xxx_lport *lport = container_of(se_wwn,
 			struct tcm_qla2xxx_lport, lport_wwn);
@@ -1077,10 +1027,10 @@ static ssize_t tcm_qla2xxx_npiv_tpg_store_enable(
 	return count;
 }
 
-TF_TPG_BASE_ATTR(tcm_qla2xxx_npiv, enable, S_IRUGO | S_IWUSR);
+CONFIGFS_ATTR(tcm_qla2xxx_npiv_tpg_, enable);
 
 static struct configfs_attribute *tcm_qla2xxx_npiv_tpg_attrs[] = {
-        &tcm_qla2xxx_npiv_tpg_enable.attr,
+        &tcm_qla2xxx_npiv_tpg_attr_enable,
         NULL,
 };
 
@@ -1783,9 +1733,8 @@ static void tcm_qla2xxx_npiv_drop_lport(struct se_wwn *wwn)
 }
 
 
-static ssize_t tcm_qla2xxx_wwn_show_attr_version(
-	struct target_fabric_configfs *tf,
-	char *page)
+static ssize_t tcm_qla2xxx_wwn_version_show(struct config_item *item,
+		char *page)
 {
 	return sprintf(page,
 	    "TCM QLOGIC QLA2XXX NPIV capable fabric module %s on %s/%s on "
@@ -1793,10 +1742,10 @@ static ssize_t tcm_qla2xxx_wwn_show_attr_version(
 	    utsname()->machine);
 }
 
-TF_WWN_ATTR_RO(tcm_qla2xxx, version);
+CONFIGFS_ATTR_RO(tcm_qla2xxx_wwn_, version);
 
 static struct configfs_attribute *tcm_qla2xxx_wwn_attrs[] = {
-	&tcm_qla2xxx_wwn_version.attr,
+	&tcm_qla2xxx_wwn_attr_version,
 	NULL,
 };
 
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 7c3365864..ae87d6c19 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -12,7 +12,7 @@
 #include "ql4_glbl.h"
 #include "ql4_inline.h"
 
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 
 #define TIMEOUT_100_MS	100
 #define MASK(n)		DMA_BIT_MASK(n)
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 6d25879d8..01c3610a6 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -212,7 +212,6 @@ static struct scsi_host_template qla4xxx_driver_template = {
 	.shost_attrs		= qla4xxx_host_attrs,
 	.host_reset		= qla4xxx_host_reset,
 	.vendor_id		= SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC,
-	.use_blk_tags		= 1,
 };
 
 static struct iscsi_transport qla4xxx_iscsi_transport = {
@@ -8697,13 +8696,6 @@ static int qla4xxx_probe_adapter(struct pci_dev *pdev,
 	host->can_queue = MAX_SRBS ;
 	host->transportt = qla4xxx_scsi_transport;
 
-	ret = scsi_init_shared_tag_map(host, MAX_SRBS);
-	if (ret) {
-		ql4_printk(KERN_WARNING, ha,
-			   "%s: scsi_init_shared_tag_map failed\n", __func__);
-		goto probe_failed;
-	}
-
 	pci_set_drvdata(pdev, ha);
 
 	ret = scsi_add_host(host, &pdev->dev);
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 207d6a7a1..d07fb653f 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -616,32 +616,11 @@ void scsi_finish_command(struct scsi_cmnd *cmd)
  */
 int scsi_change_queue_depth(struct scsi_device *sdev, int depth)
 {
-	unsigned long flags;
-
-	if (depth <= 0)
-		goto out;
-
-	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-
-	/*
-	 * Check to see if the queue is managed by the block layer.
-	 * If it is, and we fail to adjust the depth, exit.
-	 *
-	 * Do not resize the tag map if it is a host wide share bqt,
-	 * because the size should be the hosts's can_queue. If there
-	 * is more IO than the LLD's can_queue (so there are not enuogh
-	 * tags) request_fn's host queue ready check will handle it.
-	 */
-	if (!shost_use_blk_mq(sdev->host) && !sdev->host->bqt) {
-		if (blk_queue_tagged(sdev->request_queue) &&
-		    blk_queue_resize_tags(sdev->request_queue, depth) != 0)
-			goto out_unlock;
+	if (depth > 0) {
+		sdev->queue_depth = depth;
+		wmb();
 	}
 
-	sdev->queue_depth = depth;
-out_unlock:
-	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-out:
 	return sdev->queue_depth;
 }
 EXPORT_SYMBOL(scsi_change_queue_depth);
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index dfcc45bb0..d09d60293 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -465,8 +465,9 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = {
 	     0} },
 	{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* MAINT OUT */
 	    {0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
-	{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* VERIFY */
-	    {0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+	{0, 0x2f, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, NULL, NULL, /* VERIFY(10) */
+	    {10,  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7,
+	     0, 0, 0, 0, 0, 0} },
 	{1, 0x7f, 0x9, F_SA_HIGH | F_D_IN | FF_DIRECT_IO, resp_read_dt0,
 	    vl_iarr, {32,  0xc7, 0, 0, 0, 0, 0x1f, 0x18, 0x0, 0x9, 0xfe, 0,
 		      0xff, 0xff, 0xff, 0xff} },/* VARIABLE LENGTH, READ(32) */
@@ -477,8 +478,8 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = {
 	    {10,  0x13, 0xff, 0xff, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0,
 	     0} },
 /* 20 */
-	{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ALLOW REMOVAL */
-	    {0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+	{0, 0x1e, 0, 0, NULL, NULL, /* ALLOW REMOVAL */
+	    {6,  0, 0, 0, 0x3, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
 	{0, 0x1, 0, 0, resp_start_stop, NULL, /* REWIND ?? */
 	    {6,  0x1, 0, 0, 0, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
 	{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ATA_PT */
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 9f77d2323..2c1160c7e 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -390,25 +390,57 @@ int scsi_dev_info_list_add_keyed(int compatible, char *vendor, char *model,
 EXPORT_SYMBOL(scsi_dev_info_list_add_keyed);
 
 /**
- * scsi_dev_info_list_del_keyed - remove one dev_info list entry.
+ * scsi_dev_info_list_find - find a matching dev_info list entry.
  * @vendor:	vendor string
  * @model:	model (product) string
  * @key:	specify list to use
  *
  * Description:
- * 	Remove and destroy one dev_info entry for @vendor, @model
+ *	Finds the first dev_info entry matching @vendor, @model
  * 	in list specified by @key.
  *
- * Returns: 0 OK, -error on failure.
+ * Returns: pointer to matching entry, or ERR_PTR on failure.
  **/
-int scsi_dev_info_list_del_keyed(char *vendor, char *model, int key)
+static struct scsi_dev_info_list *scsi_dev_info_list_find(const char *vendor,
+		const char *model, int key)
 {
-	struct scsi_dev_info_list *devinfo, *found = NULL;
+	struct scsi_dev_info_list *devinfo;
 	struct scsi_dev_info_list_table *devinfo_table =
 		scsi_devinfo_lookup_by_key(key);
+	size_t vmax, mmax;
+	const char *vskip, *mskip;
 
 	if (IS_ERR(devinfo_table))
-		return PTR_ERR(devinfo_table);
+		return (struct scsi_dev_info_list *) devinfo_table;
+
+	/* Prepare for "compatible" matches */
+
+	/*
+	 * XXX why skip leading spaces? If an odd INQUIRY
+	 * value, that should have been part of the
+	 * scsi_static_device_list[] entry, such as "  FOO"
+	 * rather than "FOO". Since this code is already
+	 * here, and we don't know what device it is
+	 * trying to work with, leave it as-is.
+	 */
+	vmax = 8;	/* max length of vendor */
+	vskip = vendor;
+	while (vmax > 0 && *vskip == ' ') {
+		vmax--;
+		vskip++;
+	}
+	/* Also skip trailing spaces */
+	while (vmax > 0 && vskip[vmax - 1] == ' ')
+		--vmax;
+
+	mmax = 16;	/* max length of model */
+	mskip = model;
+	while (mmax > 0 && *mskip == ' ') {
+		mmax--;
+		mskip++;
+	}
+	while (mmax > 0 && mskip[mmax - 1] == ' ')
+		--mmax;
 
 	list_for_each_entry(devinfo, &devinfo_table->scsi_dev_info_list,
 			    dev_info_list) {
@@ -416,61 +448,48 @@ int scsi_dev_info_list_del_keyed(char *vendor, char *model, int key)
 			/*
 			 * Behave like the older version of get_device_flags.
 			 */
-			size_t max;
-			/*
-			 * XXX why skip leading spaces? If an odd INQUIRY
-			 * value, that should have been part of the
-			 * scsi_static_device_list[] entry, such as "  FOO"
-			 * rather than "FOO". Since this code is already
-			 * here, and we don't know what device it is
-			 * trying to work with, leave it as-is.
-			 */
-			max = 8;	/* max length of vendor */
-			while ((max > 0) && *vendor == ' ') {
-				max--;
-				vendor++;
-			}
-			/*
-			 * XXX removing the following strlen() would be
-			 * good, using it means that for a an entry not in
-			 * the list, we scan every byte of every vendor
-			 * listed in scsi_static_device_list[], and never match
-			 * a single one (and still have to compare at
-			 * least the first byte of each vendor).
-			 */
-			if (memcmp(devinfo->vendor, vendor,
-				    min(max, strlen(devinfo->vendor))))
+			if (memcmp(devinfo->vendor, vskip, vmax) ||
+					devinfo->vendor[vmax])
 				continue;
-			/*
-			 * Skip spaces again.
-			 */
-			max = 16;	/* max length of model */
-			while ((max > 0) && *model == ' ') {
-				max--;
-				model++;
-			}
-			if (memcmp(devinfo->model, model,
-				   min(max, strlen(devinfo->model))))
+			if (memcmp(devinfo->model, mskip, mmax) ||
+					devinfo->model[mmax])
 				continue;
-			found = devinfo;
+			return devinfo;
 		} else {
 			if (!memcmp(devinfo->vendor, vendor,
 				     sizeof(devinfo->vendor)) &&
 			     !memcmp(devinfo->model, model,
 				      sizeof(devinfo->model)))
-				found = devinfo;
+				return devinfo;
 		}
-		if (found)
-			break;
 	}
 
-	if (found) {
-		list_del(&found->dev_info_list);
-		kfree(found);
-		return 0;
-	}
+	return ERR_PTR(-ENOENT);
+}
+
+/**
+ * scsi_dev_info_list_del_keyed - remove one dev_info list entry.
+ * @vendor:	vendor string
+ * @model:	model (product) string
+ * @key:	specify list to use
+ *
+ * Description:
+ *	Remove and destroy one dev_info entry for @vendor, @model
+ *	in list specified by @key.
+ *
+ * Returns: 0 OK, -error on failure.
+ **/
+int scsi_dev_info_list_del_keyed(char *vendor, char *model, int key)
+{
+	struct scsi_dev_info_list *found;
 
-	return -ENOENT;
+	found = scsi_dev_info_list_find(vendor, model, key);
+	if (IS_ERR(found))
+		return PTR_ERR(found);
+
+	list_del(&found->dev_info_list);
+	kfree(found);
+	return 0;
 }
 EXPORT_SYMBOL(scsi_dev_info_list_del_keyed);
 
@@ -565,64 +584,16 @@ int scsi_get_device_flags_keyed(struct scsi_device *sdev,
 				int key)
 {
 	struct scsi_dev_info_list *devinfo;
-	struct scsi_dev_info_list_table *devinfo_table;
+	int err;
 
-	devinfo_table = scsi_devinfo_lookup_by_key(key);
+	devinfo = scsi_dev_info_list_find(vendor, model, key);
+	if (!IS_ERR(devinfo))
+		return devinfo->flags;
 
-	if (IS_ERR(devinfo_table))
-		return PTR_ERR(devinfo_table);
+	err = PTR_ERR(devinfo);
+	if (err != -ENOENT)
+		return err;
 
-	list_for_each_entry(devinfo, &devinfo_table->scsi_dev_info_list,
-			    dev_info_list) {
-		if (devinfo->compatible) {
-			/*
-			 * Behave like the older version of get_device_flags.
-			 */
-			size_t max;
-			/*
-			 * XXX why skip leading spaces? If an odd INQUIRY
-			 * value, that should have been part of the
-			 * scsi_static_device_list[] entry, such as "  FOO"
-			 * rather than "FOO". Since this code is already
-			 * here, and we don't know what device it is
-			 * trying to work with, leave it as-is.
-			 */
-			max = 8;	/* max length of vendor */
-			while ((max > 0) && *vendor == ' ') {
-				max--;
-				vendor++;
-			}
-			/*
-			 * XXX removing the following strlen() would be
-			 * good, using it means that for a an entry not in
-			 * the list, we scan every byte of every vendor
-			 * listed in scsi_static_device_list[], and never match
-			 * a single one (and still have to compare at
-			 * least the first byte of each vendor).
-			 */
-			if (memcmp(devinfo->vendor, vendor,
-				    min(max, strlen(devinfo->vendor))))
-				continue;
-			/*
-			 * Skip spaces again.
-			 */
-			max = 16;	/* max length of model */
-			while ((max > 0) && *model == ' ') {
-				max--;
-				model++;
-			}
-			if (memcmp(devinfo->model, model,
-				   min(max, strlen(devinfo->model))))
-				continue;
-			return devinfo->flags;
-		} else {
-			if (!memcmp(devinfo->vendor, vendor,
-				     sizeof(devinfo->vendor)) &&
-			     !memcmp(devinfo->model, model,
-				      sizeof(devinfo->model)))
-				return devinfo->flags;
-		}
-	}
 	/* nothing found, return nothing */
 	if (key != SCSI_DEVINFO_GLOBAL)
 		return 0;
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 66a96cd98..984ddcb47 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1970,7 +1970,7 @@ static void scsi_eh_lock_door(struct scsi_device *sdev)
 	struct request *req;
 
 	/*
-	 * blk_get_request with GFP_KERNEL (__GFP_WAIT) sleeps until a
+	 * blk_get_request with GFP_KERNEL (__GFP_RECLAIM) sleeps until a
 	 * request becomes available
 	 */
 	req = blk_get_request(sdev->request_queue, READ, GFP_KERNEL);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 126a48c64..dd8ad2a44 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -222,13 +222,13 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 	int write = (data_direction == DMA_TO_DEVICE);
 	int ret = DRIVER_ERROR << 24;
 
-	req = blk_get_request(sdev->request_queue, write, __GFP_WAIT);
+	req = blk_get_request(sdev->request_queue, write, __GFP_RECLAIM);
 	if (IS_ERR(req))
 		return ret;
 	blk_rq_set_block_pc(req);
 
 	if (bufflen &&	blk_rq_map_kern(sdev->request_queue, req,
-					buffer, bufflen, __GFP_WAIT))
+					buffer, bufflen, __GFP_RECLAIM))
 		goto out;
 
 	req->cmd_len = COMMAND_SIZE(cmd[0]);
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index e4b799837..459abe1dc 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -219,13 +219,13 @@ static int sdev_runtime_suspend(struct device *dev)
 	struct scsi_device *sdev = to_scsi_device(dev);
 	int err = 0;
 
-	if (pm && pm->runtime_suspend) {
-		err = blk_pre_runtime_suspend(sdev->request_queue);
-		if (err)
-			return err;
+	err = blk_pre_runtime_suspend(sdev->request_queue);
+	if (err)
+		return err;
+	if (pm && pm->runtime_suspend)
 		err = pm->runtime_suspend(dev);
-		blk_post_runtime_suspend(sdev->request_queue, err);
-	}
+	blk_post_runtime_suspend(sdev->request_queue, err);
+
 	return err;
 }
 
@@ -248,11 +248,11 @@ static int sdev_runtime_resume(struct device *dev)
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 	int err = 0;
 
-	if (pm && pm->runtime_resume) {
-		blk_pre_runtime_resume(sdev->request_queue);
+	blk_pre_runtime_resume(sdev->request_queue);
+	if (pm && pm->runtime_resume)
 		err = pm->runtime_resume(dev);
-		blk_post_runtime_resume(sdev->request_queue, err);
-	}
+	blk_post_runtime_resume(sdev->request_queue, err);
+
 	return err;
 }
 
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index f9f3f8203..054923e33 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -55,6 +55,7 @@
  * Default timeout
  */
 #define SCSI_TIMEOUT (2*HZ)
+#define SCSI_REPORT_LUNS_TIMEOUT (30*HZ)
 
 /*
  * Prefix values for the SCSI id's (stored in sysfs name field)
@@ -274,8 +275,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	WARN_ON_ONCE(!blk_get_queue(sdev->request_queue));
 	sdev->request_queue->queuedata = sdev;
 
-	if (!shost_use_blk_mq(sdev->host) &&
-	    (shost->bqt || shost->hostt->use_blk_tags)) {
+	if (!shost_use_blk_mq(sdev->host)) {
 		blk_queue_init_tags(sdev->request_queue,
 				    sdev->host->cmd_per_lun, shost->bqt,
 				    shost->hostt->tag_alloc_policy);
@@ -701,9 +701,12 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 	 * strings.
 	 */
 	if (sdev->inquiry_len < 36) {
-		sdev_printk(KERN_INFO, sdev,
-			    "scsi scan: INQUIRY result too short (%d),"
-			    " using 36\n", sdev->inquiry_len);
+		if (!sdev->host->short_inquiry) {
+			shost_printk(KERN_INFO, sdev->host,
+				    "scsi scan: INQUIRY result too short (%d),"
+				    " using 36\n", sdev->inquiry_len);
+			sdev->host->short_inquiry = 1;
+		}
 		sdev->inquiry_len = 36;
 	}
 
@@ -1383,7 +1386,7 @@ retry:
 
 		result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
 					  lun_data, length, &sshdr,
-					  SCSI_TIMEOUT + 4 * HZ, 3, NULL);
+					  SCSI_REPORT_LUNS_TIMEOUT, 3, NULL);
 
 		SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
 				"scsi scan: REPORT LUNS"
@@ -1712,8 +1715,7 @@ static struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost)
 		return NULL;
 
 	if (shost->async_scan) {
-		shost_printk(KERN_INFO, shost, "%s called twice\n", __func__);
-		dump_stack();
+		shost_printk(KERN_DEBUG, shost, "%s called twice\n", __func__);
 		return NULL;
 	}
 
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index dff8fafb7..21930c9ac 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -775,6 +775,29 @@ static struct bin_attribute dev_attr_vpd_##_page = {		\
 sdev_vpd_pg_attr(pg83);
 sdev_vpd_pg_attr(pg80);
 
+static ssize_t show_inquiry(struct file *filep, struct kobject *kobj,
+			    struct bin_attribute *bin_attr,
+			    char *buf, loff_t off, size_t count)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	if (!sdev->inquiry)
+		return -EINVAL;
+
+	return memory_read_from_buffer(buf, count, &off, sdev->inquiry,
+				       sdev->inquiry_len);
+}
+
+static struct bin_attribute dev_attr_inquiry = {
+	.attr = {
+		.name = "inquiry",
+		.mode = S_IRUGO,
+	},
+	.size = 0,
+	.read = show_inquiry,
+};
+
 static ssize_t
 show_iostat_counterbits(struct device *dev, struct device_attribute *attr,
 			char *buf)
@@ -900,7 +923,7 @@ sdev_store_queue_ramp_up_period(struct device *dev,
 		return -EINVAL;
 
 	sdev->queue_ramp_up_period = msecs_to_jiffies(period);
-	return period;
+	return count;
 }
 
 static DEVICE_ATTR(queue_ramp_up_period, S_IRUGO | S_IWUSR,
@@ -959,6 +982,7 @@ static struct attribute *scsi_sdev_attrs[] = {
 static struct bin_attribute *scsi_sdev_bin_attrs[] = {
 	&dev_attr_vpd_pg83,
 	&dev_attr_vpd_pg80,
+	&dev_attr_inquiry,
 	NULL
 };
 static struct attribute_group scsi_sdev_attr_group = {
@@ -1078,6 +1102,14 @@ void __scsi_remove_device(struct scsi_device *sdev)
 {
 	struct device *dev = &sdev->sdev_gendev;
 
+	/*
+	 * This cleanup path is not reentrant and while it is impossible
+	 * to get a new reference with scsi_device_get() someone can still
+	 * hold a previously acquired one.
+	 */
+	if (sdev->sdev_state == SDEV_DEL)
+		return;
+
 	if (sdev->is_visible) {
 		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
 			return;
@@ -1160,31 +1192,23 @@ static void __scsi_remove_target(struct scsi_target *starget)
 void scsi_remove_target(struct device *dev)
 {
 	struct Scsi_Host *shost = dev_to_shost(dev->parent);
-	struct scsi_target *starget, *last = NULL;
+	struct scsi_target *starget;
 	unsigned long flags;
 
-	/* remove targets being careful to lookup next entry before
-	 * deleting the last
-	 */
+restart:
 	spin_lock_irqsave(shost->host_lock, flags);
 	list_for_each_entry(starget, &shost->__targets, siblings) {
 		if (starget->state == STARGET_DEL)
 			continue;
 		if (starget->dev.parent == dev || &starget->dev == dev) {
-			/* assuming new targets arrive at the end */
 			kref_get(&starget->reap_ref);
 			spin_unlock_irqrestore(shost->host_lock, flags);
-			if (last)
-				scsi_target_reap(last);
-			last = starget;
 			__scsi_remove_target(starget);
-			spin_lock_irqsave(shost->host_lock, flags);
+			scsi_target_reap(starget);
+			goto restart;
 		}
 	}
 	spin_unlock_irqrestore(shost->host_lock, flags);
-
-	if (last)
-		scsi_target_reap(last);
 }
 EXPORT_SYMBOL(scsi_remove_target);
 
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3f370228b..4e08d1cd7 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -51,6 +51,7 @@
 #include <linux/async.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
+#include <linux/pr.h>
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 
@@ -204,6 +205,7 @@ cache_type_store(struct device *dev, struct device_attribute *attr,
 	buffer_data[2] &= ~0x05;
 	buffer_data[2] |= wce << 2 | rcd;
 	sp = buffer_data[0] & 0x80 ? 1 : 0;
+	buffer_data[0] &= ~0x80;
 
 	if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
 			     SD_MAX_RETRIES, &data, &sshdr)) {
@@ -636,11 +638,24 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
 	unsigned int max_blocks = 0;
 
 	q->limits.discard_zeroes_data = 0;
-	q->limits.discard_alignment = sdkp->unmap_alignment *
-		logical_block_size;
-	q->limits.discard_granularity =
-		max(sdkp->physical_block_size,
-		    sdkp->unmap_granularity * logical_block_size);
+
+	/*
+	 * When LBPRZ is reported, discard alignment and granularity
+	 * must be fixed to the logical block size. Otherwise the block
+	 * layer will drop misaligned portions of the request which can
+	 * lead to data corruption. If LBPRZ is not set, we honor the
+	 * device preference.
+	 */
+	if (sdkp->lbprz) {
+		q->limits.discard_alignment = 0;
+		q->limits.discard_granularity = 1;
+	} else {
+		q->limits.discard_alignment = sdkp->unmap_alignment *
+			logical_block_size;
+		q->limits.discard_granularity =
+			max(sdkp->physical_block_size,
+			    sdkp->unmap_granularity * logical_block_size);
+	}
 
 	sdkp->provisioning_mode = mode;
 
@@ -1535,6 +1550,100 @@ static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
 }
 #endif
 
+static char sd_pr_type(enum pr_type type)
+{
+	switch (type) {
+	case PR_WRITE_EXCLUSIVE:
+		return 0x01;
+	case PR_EXCLUSIVE_ACCESS:
+		return 0x03;
+	case PR_WRITE_EXCLUSIVE_REG_ONLY:
+		return 0x05;
+	case PR_EXCLUSIVE_ACCESS_REG_ONLY:
+		return 0x06;
+	case PR_WRITE_EXCLUSIVE_ALL_REGS:
+		return 0x07;
+	case PR_EXCLUSIVE_ACCESS_ALL_REGS:
+		return 0x08;
+	default:
+		return 0;
+	}
+};
+
+static int sd_pr_command(struct block_device *bdev, u8 sa,
+		u64 key, u64 sa_key, u8 type, u8 flags)
+{
+	struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
+	struct scsi_sense_hdr sshdr;
+	int result;
+	u8 cmd[16] = { 0, };
+	u8 data[24] = { 0, };
+
+	cmd[0] = PERSISTENT_RESERVE_OUT;
+	cmd[1] = sa;
+	cmd[2] = type;
+	put_unaligned_be32(sizeof(data), &cmd[5]);
+
+	put_unaligned_be64(key, &data[0]);
+	put_unaligned_be64(sa_key, &data[8]);
+	data[20] = flags;
+
+	result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, &data, sizeof(data),
+			&sshdr, SD_TIMEOUT, SD_MAX_RETRIES, NULL);
+
+	if ((driver_byte(result) & DRIVER_SENSE) &&
+	    (scsi_sense_valid(&sshdr))) {
+		sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result);
+		scsi_print_sense_hdr(sdev, NULL, &sshdr);
+	}
+
+	return result;
+}
+
+static int sd_pr_register(struct block_device *bdev, u64 old_key, u64 new_key,
+		u32 flags)
+{
+	if (flags & ~PR_FL_IGNORE_KEY)
+		return -EOPNOTSUPP;
+	return sd_pr_command(bdev, (flags & PR_FL_IGNORE_KEY) ? 0x06 : 0x00,
+			old_key, new_key, 0,
+			(1 << 0) /* APTPL */ |
+			(1 << 2) /* ALL_TG_PT */);
+}
+
+static int sd_pr_reserve(struct block_device *bdev, u64 key, enum pr_type type,
+		u32 flags)
+{
+	if (flags)
+		return -EOPNOTSUPP;
+	return sd_pr_command(bdev, 0x01, key, 0, sd_pr_type(type), 0);
+}
+
+static int sd_pr_release(struct block_device *bdev, u64 key, enum pr_type type)
+{
+	return sd_pr_command(bdev, 0x02, key, 0, sd_pr_type(type), 0);
+}
+
+static int sd_pr_preempt(struct block_device *bdev, u64 old_key, u64 new_key,
+		enum pr_type type, bool abort)
+{
+	return sd_pr_command(bdev, abort ? 0x05 : 0x04, old_key, new_key,
+			     sd_pr_type(type), 0);
+}
+
+static int sd_pr_clear(struct block_device *bdev, u64 key)
+{
+	return sd_pr_command(bdev, 0x03, key, 0, 0, 0);
+}
+
+static const struct pr_ops sd_pr_ops = {
+	.pr_register	= sd_pr_register,
+	.pr_reserve	= sd_pr_reserve,
+	.pr_release	= sd_pr_release,
+	.pr_preempt	= sd_pr_preempt,
+	.pr_clear	= sd_pr_clear,
+};
+
 static const struct block_device_operations sd_fops = {
 	.owner			= THIS_MODULE,
 	.open			= sd_open,
@@ -1547,6 +1656,7 @@ static const struct block_device_operations sd_fops = {
 	.check_events		= sd_check_events,
 	.revalidate_disk	= sd_revalidate_disk,
 	.unlock_native_capacity	= sd_unlock_native_capacity,
+	.pr_ops			= &sd_pr_ops,
 };
 
 /**
@@ -2224,11 +2334,8 @@ got_data:
 		}
 	}
 
-	if (sdkp->capacity > 0xffffffff) {
+	if (sdkp->capacity > 0xffffffff)
 		sdp->use_16_for_rw = 1;
-		sdkp->max_xfer_blocks = SD_MAX_XFER_BLOCKS;
-	} else
-		sdkp->max_xfer_blocks = SD_DEF_XFER_BLOCKS;
 
 	/* Rescale capacity to 512-byte units */
 	if (sector_size == 4096)
@@ -2545,7 +2652,6 @@ static void sd_read_block_limits(struct scsi_disk *sdkp)
 {
 	unsigned int sector_sz = sdkp->device->sector_size;
 	const int vpd_len = 64;
-	u32 max_xfer_length;
 	unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
 
 	if (!buffer ||
@@ -2553,14 +2659,11 @@ static void sd_read_block_limits(struct scsi_disk *sdkp)
 	    scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
 		goto out;
 
-	max_xfer_length = get_unaligned_be32(&buffer[8]);
-	if (max_xfer_length)
-		sdkp->max_xfer_blocks = max_xfer_length;
-
 	blk_queue_io_min(sdkp->disk->queue,
 			 get_unaligned_be16(&buffer[6]) * sector_sz);
-	blk_queue_io_opt(sdkp->disk->queue,
-			 get_unaligned_be32(&buffer[12]) * sector_sz);
+
+	sdkp->max_xfer_blocks = get_unaligned_be32(&buffer[8]);
+	sdkp->opt_xfer_blocks = get_unaligned_be32(&buffer[12]);
 
 	if (buffer[3] == 0x3c) {
 		unsigned int lba_count, desc_count;
@@ -2709,6 +2812,11 @@ static int sd_try_extended_inquiry(struct scsi_device *sdp)
 	return 0;
 }
 
+static inline u32 logical_to_sectors(struct scsi_device *sdev, u32 blocks)
+{
+	return blocks << (ilog2(sdev->sector_size) - 9);
+}
+
 /**
  *	sd_revalidate_disk - called the first time a new disk is seen,
  *	performs disk spin up, read_capacity, etc.
@@ -2718,8 +2826,9 @@ static int sd_revalidate_disk(struct gendisk *disk)
 {
 	struct scsi_disk *sdkp = scsi_disk(disk);
 	struct scsi_device *sdp = sdkp->device;
+	struct request_queue *q = sdkp->disk->queue;
 	unsigned char *buffer;
-	unsigned int max_xfer;
+	unsigned int dev_max, rw_max;
 
 	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
 				      "sd_revalidate_disk\n"));
@@ -2767,11 +2876,29 @@ static int sd_revalidate_disk(struct gendisk *disk)
 	 */
 	sd_set_flush_flag(sdkp);
 
-	max_xfer = sdkp->max_xfer_blocks;
-	max_xfer <<= ilog2(sdp->sector_size) - 9;
+	/* Initial block count limit based on CDB TRANSFER LENGTH field size. */
+	dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS;
+
+	/* Some devices report a maximum block count for READ/WRITE requests. */
+	dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks);
+	q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max);
+
+	/*
+	 * Use the device's preferred I/O size for reads and writes
+	 * unless the reported value is unreasonably small, large, or
+	 * garbage.
+	 */
+	if (sdkp->opt_xfer_blocks &&
+	    sdkp->opt_xfer_blocks <= dev_max &&
+	    sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS &&
+	    sdkp->opt_xfer_blocks * sdp->sector_size >= PAGE_CACHE_SIZE)
+		rw_max = q->limits.io_opt =
+			logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
+	else
+		rw_max = BLK_DEF_MAX_SECTORS;
 
-	sdkp->disk->queue->limits.max_sectors =
-		min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), max_xfer);
+	/* Combine with controller limits */
+	q->limits.max_sectors = min(rw_max, queue_max_hw_sectors(q));
 
 	set_capacity(disk, sdkp->capacity);
 	sd_config_write_same(sdkp);
@@ -3068,7 +3195,6 @@ static void scsi_disk_release(struct device *dev)
 	ida_remove(&sd_index_ida, sdkp->index);
 	spin_unlock(&sd_index_lock);
 
-	blk_integrity_unregister(disk);
 	disk->private_data = NULL;
 	put_disk(disk);
 	put_device(&sdkp->device->sdev_gendev);
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 63ba5ca7f..5f2a84aff 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -67,6 +67,7 @@ struct scsi_disk {
 	atomic_t	openers;
 	sector_t	capacity;	/* size in 512-byte sectors */
 	u32		max_xfer_blocks;
+	u32		opt_xfer_blocks;
 	u32		max_ws_blocks;
 	u32		max_unmap_blocks;
 	u32		unmap_granularity;
diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c
index 5c06d292b..987bf392c 100644
--- a/drivers/scsi/sd_dif.c
+++ b/drivers/scsi/sd_dif.c
@@ -43,6 +43,7 @@ void sd_dif_config_host(struct scsi_disk *sdkp)
 	struct scsi_device *sdp = sdkp->device;
 	struct gendisk *disk = sdkp->disk;
 	u8 type = sdkp->protection_type;
+	struct blk_integrity bi;
 	int dif, dix;
 
 	dif = scsi_host_dif_capable(sdp->host, type);
@@ -55,39 +56,43 @@ void sd_dif_config_host(struct scsi_disk *sdkp)
 	if (!dix)
 		return;
 
+	memset(&bi, 0, sizeof(bi));
+
 	/* Enable DMA of protection information */
 	if (scsi_host_get_guard(sdkp->device->host) & SHOST_DIX_GUARD_IP) {
 		if (type == SD_DIF_TYPE3_PROTECTION)
-			blk_integrity_register(disk, &t10_pi_type3_ip);
+			bi.profile = &t10_pi_type3_ip;
 		else
-			blk_integrity_register(disk, &t10_pi_type1_ip);
+			bi.profile = &t10_pi_type1_ip;
 
-		disk->integrity->flags |= BLK_INTEGRITY_IP_CHECKSUM;
+		bi.flags |= BLK_INTEGRITY_IP_CHECKSUM;
 	} else
 		if (type == SD_DIF_TYPE3_PROTECTION)
-			blk_integrity_register(disk, &t10_pi_type3_crc);
+			bi.profile = &t10_pi_type3_crc;
 		else
-			blk_integrity_register(disk, &t10_pi_type1_crc);
+			bi.profile = &t10_pi_type1_crc;
 
+	bi.tuple_size = sizeof(struct t10_pi_tuple);
 	sd_printk(KERN_NOTICE, sdkp,
-		  "Enabling DIX %s protection\n", disk->integrity->name);
+		  "Enabling DIX %s protection\n", bi.profile->name);
 
-	/* Signal to block layer that we support sector tagging */
 	if (dif && type) {
-
-		disk->integrity->flags |= BLK_INTEGRITY_DEVICE_CAPABLE;
+		bi.flags |= BLK_INTEGRITY_DEVICE_CAPABLE;
 
 		if (!sdkp->ATO)
-			return;
+			goto out;
 
 		if (type == SD_DIF_TYPE3_PROTECTION)
-			disk->integrity->tag_size = sizeof(u16) + sizeof(u32);
+			bi.tag_size = sizeof(u16) + sizeof(u32);
 		else
-			disk->integrity->tag_size = sizeof(u16);
+			bi.tag_size = sizeof(u16);
 
 		sd_printk(KERN_NOTICE, sdkp, "DIF application tag size %u\n",
-			  disk->integrity->tag_size);
+			  bi.tag_size);
 	}
+
+out:
+	blk_integrity_register(disk, &bi);
 }
 
 /*
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index dcb0d76d7..044d06410 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -84,6 +84,7 @@ static void init_device_slot_control(unsigned char *dest_desc,
 static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 			 void *buf, int bufflen)
 {
+	int ret;
 	unsigned char cmd[] = {
 		RECEIVE_DIAGNOSTIC,
 		1,		/* Set PCV bit */
@@ -92,9 +93,26 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 		bufflen & 0xff,
 		0
 	};
+	unsigned char recv_page_code;
 
-	return scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
+	ret =  scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
 				NULL, SES_TIMEOUT, SES_RETRIES, NULL);
+	if (unlikely(!ret))
+		return ret;
+
+	recv_page_code = ((unsigned char *)buf)[0];
+
+	if (likely(recv_page_code == page_code))
+		return ret;
+
+	/* successful diagnostic but wrong page code.  This happens to some
+	 * USB devices, just print a message and pretend there was an error */
+
+	sdev_printk(KERN_ERR, sdev,
+		    "Wrong diagnostic page; asked for %d got %u\n",
+		    page_code, recv_page_code);
+
+	return -EINVAL;
 }
 
 static int ses_send_diag(struct scsi_device *sdev, int page_code,
@@ -541,7 +559,15 @@ static void ses_enclosure_data_process(struct enclosure_device *edev,
 			if (desc_ptr)
 				desc_ptr += len;
 
-			if (addl_desc_ptr)
+			if (addl_desc_ptr &&
+			    /* only find additional descriptions for specific devices */
+			    (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SAS_EXPANDER ||
+			     /* these elements are optional */
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS))
 				addl_desc_ptr += addl_desc_ptr[1] + 2;
 
 		}
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 9d7b7db75..503ab8b46 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -787,8 +787,14 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 		return k;	/* probably out of space --> ENOMEM */
 	}
 	if (atomic_read(&sdp->detaching)) {
-		if (srp->bio)
+		if (srp->bio) {
+			if (srp->rq->cmd != srp->rq->__cmd)
+				kfree(srp->rq->cmd);
+
 			blk_end_request_all(srp->rq, -EIO);
+			srp->rq = NULL;
+		}
+
 		sg_finish_rem_req(srp);
 		return -ENODEV;
 	}
diff --git a/drivers/scsi/snic/snic_main.c b/drivers/scsi/snic/snic_main.c
index b2b87cef0..2b3c25371 100644
--- a/drivers/scsi/snic/snic_main.c
+++ b/drivers/scsi/snic/snic_main.c
@@ -124,7 +124,6 @@ static struct scsi_host_template snic_host_template = {
 	.sg_tablesize = SNIC_MAX_SG_DESC_CNT,
 	.max_sectors = 0x800,
 	.shost_attrs = snic_attrs,
-	.use_blk_tags = 1,
 	.track_queue_depth = 1,
 	.cmd_size = sizeof(struct snic_internal_io_state),
 	.proc_name = "snic_scsi",
@@ -533,15 +532,6 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	snic->max_tag_id = shost->can_queue;
 
-	ret = scsi_init_shared_tag_map(shost, snic->max_tag_id);
-	if (ret) {
-		SNIC_HOST_ERR(shost,
-			      "Unable to alloc shared tag map. %d\n",
-			      ret);
-
-		goto err_dev_close;
-	}
-
 	shost->max_lun = snic->config.luns_per_tgt;
 	shost->max_id = SNIC_MAX_TARGET;
 
diff --git a/drivers/scsi/snic/snic_trc.c b/drivers/scsi/snic/snic_trc.c
index 28a40a7ad..f00ebf471 100644
--- a/drivers/scsi/snic/snic_trc.c
+++ b/drivers/scsi/snic/snic_trc.c
@@ -148,7 +148,7 @@ snic_trc_init(void)
 
 	trc->max_idx = (tbuf_sz / SNIC_TRC_ENTRY_SZ);
 	trc->rd_idx = trc->wr_idx = 0;
-	trc->enable = 1;
+	trc->enable = true;
 	SNIC_INFO("Trace Facility Enabled.\n Trace Buffer SZ %lu Pages.\n",
 		  tbuf_sz / PAGE_SIZE);
 	ret = 0;
@@ -169,7 +169,7 @@ snic_trc_free(void)
 {
 	struct snic_trc *trc = &snic_glob->trc;
 
-	trc->enable = 0;
+	trc->enable = false;
 	snic_trc_debugfs_term();
 
 	if (trc->buf) {
diff --git a/drivers/scsi/snic/snic_trc.h b/drivers/scsi/snic/snic_trc.h
index 427faee5f..b37f8867b 100644
--- a/drivers/scsi/snic/snic_trc.h
+++ b/drivers/scsi/snic/snic_trc.h
@@ -45,7 +45,7 @@ struct snic_trc {
 	u32	max_idx;		/* Max Index into trace buffer */
 	u32	rd_idx;
 	u32	wr_idx;
-	u32	enable;			/* Control Variable for Tracing */
+	bool	enable;			/* Control Variable for Tracing */
 
 	struct dentry *trc_enable;	/* debugfs file object */
 	struct dentry *trc_file;
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index b37b9b00c..2e522951b 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4083,6 +4083,7 @@ static int create_one_cdev(struct scsi_tape *tape, int mode, int rew)
 	}
 	cdev->owner = THIS_MODULE;
 	cdev->ops = &st_fops;
+	STm->cdevs[rew] = cdev;
 
 	error = cdev_add(cdev, cdev_devno, 1);
 	if (error) {
@@ -4091,7 +4092,6 @@ static int create_one_cdev(struct scsi_tape *tape, int mode, int rew)
 		pr_err("st%d: Device not attached.\n", dev_num);
 		goto out_free;
 	}
-	STm->cdevs[rew] = cdev;
 
 	i = mode << (4 - ST_NBR_MODE_BITS);
 	snprintf(name, 10, "%s%s%s", rew ? "n" : "",
@@ -4110,8 +4110,9 @@ static int create_one_cdev(struct scsi_tape *tape, int mode, int rew)
 	return 0;
 out_free:
 	cdev_del(STm->cdevs[rew]);
-	STm->cdevs[rew] = NULL;
 out:
+	STm->cdevs[rew] = NULL;
+	STm->devs[rew] = NULL;
 	return error;
 }
 
@@ -4452,11 +4453,41 @@ static ssize_t version_show(struct device_driver *ddd, char *buf)
 }
 static DRIVER_ATTR_RO(version);
 
+#if DEBUG
+static ssize_t debug_flag_store(struct device_driver *ddp,
+	const char *buf, size_t count)
+{
+/* We only care what the first byte of the data is the rest is unused.
+ * if it's a '1' we turn on debug and if it's a '0' we disable it. All
+ * other values have -EINVAL returned if they are passed in.
+ */
+	if (count > 0) {
+		if (buf[0] == '0') {
+			debugging = NO_DEBUG;
+			return count;
+		} else if (buf[0] == '1') {
+			debugging = 1;
+			return count;
+		}
+	}
+	return -EINVAL;
+}
+
+static ssize_t debug_flag_show(struct device_driver *ddp, char *buf)
+{
+	return scnprintf(buf, PAGE_SIZE, "%d\n", debugging);
+}
+static DRIVER_ATTR_RW(debug_flag);
+#endif
+
 static struct attribute *st_drv_attrs[] = {
 	&driver_attr_try_direct_io.attr,
 	&driver_attr_fixed_buffer_size.attr,
 	&driver_attr_max_sg_segs.attr,
 	&driver_attr_version.attr,
+#if DEBUG
+	&driver_attr_debug_flag.attr,
+#endif
 	NULL,
 };
 ATTRIBUTE_GROUPS(st_drv);
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 98a62bc15..2de28d7a0 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -25,6 +25,7 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
+#include <linux/ktime.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/byteorder.h>
@@ -362,14 +363,6 @@ MODULE_DESCRIPTION("Promise Technology SuperTrak EX Controllers");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(ST_DRIVER_VERSION);
 
-static void stex_gettime(__le64 *time)
-{
-	struct timeval tv;
-
-	do_gettimeofday(&tv);
-	*time = cpu_to_le64(tv.tv_sec);
-}
-
 static struct status_msg *stex_get_status(struct st_hba *hba)
 {
 	struct status_msg *status = hba->status_buffer + hba->status_tail;
@@ -1002,7 +995,7 @@ static int stex_common_handshake(struct st_hba *hba)
 	h->req_cnt = cpu_to_le16(hba->rq_count+1);
 	h->status_sz = cpu_to_le16(sizeof(struct status_msg));
 	h->status_cnt = cpu_to_le16(hba->sts_count+1);
-	stex_gettime(&h->hosttime);
+	h->hosttime = cpu_to_le64(ktime_get_real_seconds());
 	h->partner_type = HMU_PARTNER_TYPE;
 	if (hba->extra_offset) {
 		h->extra_offset = cpu_to_le32(hba->extra_offset);
@@ -1076,7 +1069,7 @@ static int stex_ss_handshake(struct st_hba *hba)
 	h->req_cnt = cpu_to_le16(hba->rq_count+1);
 	h->status_sz = cpu_to_le16(sizeof(struct status_msg));
 	h->status_cnt = cpu_to_le16(hba->sts_count+1);
-	stex_gettime(&h->hosttime);
+	h->hosttime = cpu_to_le64(ktime_get_real_seconds());
 	h->partner_type = HMU_PARTNER_TYPE;
 	h->extra_offset = h->extra_size = 0;
 	scratch_size = (hba->sts_count+1)*sizeof(u32);
@@ -1374,7 +1367,6 @@ static struct scsi_host_template driver_template = {
 	.eh_abort_handler		= stex_abort,
 	.eh_host_reset_handler		= stex_reset,
 	.this_id			= -1,
-	.use_blk_tags			= 1,
 };
 
 static struct pci_device_id stex_pci_tbl[] = {
@@ -1659,13 +1651,6 @@ static int stex_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (err)
 		goto out_free_irq;
 
-	err = scsi_init_shared_tag_map(host, host->can_queue);
-	if (err) {
-		printk(KERN_ERR DRV_NAME "(%s): init shared queue failed\n",
-			pci_name(pdev));
-		goto out_free_irq;
-	}
-
 	pci_set_drvdata(pdev, hba);
 
 	err = scsi_add_host(host, &pdev->dev);
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 40c43aeb4..3fba42ad9 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -349,11 +349,14 @@ enum storvsc_request_type {
  */
 
 #define SRB_STATUS_AUTOSENSE_VALID	0x80
+#define SRB_STATUS_QUEUE_FROZEN		0x40
 #define SRB_STATUS_INVALID_LUN	0x20
 #define SRB_STATUS_SUCCESS	0x01
 #define SRB_STATUS_ABORTED	0x02
 #define SRB_STATUS_ERROR	0x04
 
+#define SRB_STATUS(status) \
+	(status & ~(SRB_STATUS_AUTOSENSE_VALID | SRB_STATUS_QUEUE_FROZEN))
 /*
  * This is the end of Protocol specific defines.
  */
@@ -393,9 +396,6 @@ static void storvsc_on_channel_callback(void *context);
 struct storvsc_cmd_request {
 	struct scsi_cmnd *cmd;
 
-	unsigned int bounce_sgl_count;
-	struct scatterlist *bounce_sgl;
-
 	struct hv_device *device;
 
 	/* Synchronize the request/response if needed */
@@ -586,241 +586,6 @@ get_in_err:
 
 }
 
-static void destroy_bounce_buffer(struct scatterlist *sgl,
-				  unsigned int sg_count)
-{
-	int i;
-	struct page *page_buf;
-
-	for (i = 0; i < sg_count; i++) {
-		page_buf = sg_page((&sgl[i]));
-		if (page_buf != NULL)
-			__free_page(page_buf);
-	}
-
-	kfree(sgl);
-}
-
-static int do_bounce_buffer(struct scatterlist *sgl, unsigned int sg_count)
-{
-	int i;
-
-	/* No need to check */
-	if (sg_count < 2)
-		return -1;
-
-	/* We have at least 2 sg entries */
-	for (i = 0; i < sg_count; i++) {
-		if (i == 0) {
-			/* make sure 1st one does not have hole */
-			if (sgl[i].offset + sgl[i].length != PAGE_SIZE)
-				return i;
-		} else if (i == sg_count - 1) {
-			/* make sure last one does not have hole */
-			if (sgl[i].offset != 0)
-				return i;
-		} else {
-			/* make sure no hole in the middle */
-			if (sgl[i].length != PAGE_SIZE || sgl[i].offset != 0)
-				return i;
-		}
-	}
-	return -1;
-}
-
-static struct scatterlist *create_bounce_buffer(struct scatterlist *sgl,
-						unsigned int sg_count,
-						unsigned int len,
-						int write)
-{
-	int i;
-	int num_pages;
-	struct scatterlist *bounce_sgl;
-	struct page *page_buf;
-	unsigned int buf_len = ((write == WRITE_TYPE) ? 0 : PAGE_SIZE);
-
-	num_pages = ALIGN(len, PAGE_SIZE) >> PAGE_SHIFT;
-
-	bounce_sgl = kcalloc(num_pages, sizeof(struct scatterlist), GFP_ATOMIC);
-	if (!bounce_sgl)
-		return NULL;
-
-	sg_init_table(bounce_sgl, num_pages);
-	for (i = 0; i < num_pages; i++) {
-		page_buf = alloc_page(GFP_ATOMIC);
-		if (!page_buf)
-			goto cleanup;
-		sg_set_page(&bounce_sgl[i], page_buf, buf_len, 0);
-	}
-
-	return bounce_sgl;
-
-cleanup:
-	destroy_bounce_buffer(bounce_sgl, num_pages);
-	return NULL;
-}
-
-/* Assume the original sgl has enough room */
-static unsigned int copy_from_bounce_buffer(struct scatterlist *orig_sgl,
-					    struct scatterlist *bounce_sgl,
-					    unsigned int orig_sgl_count,
-					    unsigned int bounce_sgl_count)
-{
-	int i;
-	int j = 0;
-	unsigned long src, dest;
-	unsigned int srclen, destlen, copylen;
-	unsigned int total_copied = 0;
-	unsigned long bounce_addr = 0;
-	unsigned long dest_addr = 0;
-	unsigned long flags;
-	struct scatterlist *cur_dest_sgl;
-	struct scatterlist *cur_src_sgl;
-
-	local_irq_save(flags);
-	cur_dest_sgl = orig_sgl;
-	cur_src_sgl = bounce_sgl;
-	for (i = 0; i < orig_sgl_count; i++) {
-		dest_addr = (unsigned long)
-				kmap_atomic(sg_page(cur_dest_sgl)) +
-				cur_dest_sgl->offset;
-		dest = dest_addr;
-		destlen = cur_dest_sgl->length;
-
-		if (bounce_addr == 0)
-			bounce_addr = (unsigned long)kmap_atomic(
-							sg_page(cur_src_sgl));
-
-		while (destlen) {
-			src = bounce_addr + cur_src_sgl->offset;
-			srclen = cur_src_sgl->length - cur_src_sgl->offset;
-
-			copylen = min(srclen, destlen);
-			memcpy((void *)dest, (void *)src, copylen);
-
-			total_copied += copylen;
-			cur_src_sgl->offset += copylen;
-			destlen -= copylen;
-			dest += copylen;
-
-			if (cur_src_sgl->offset == cur_src_sgl->length) {
-				/* full */
-				kunmap_atomic((void *)bounce_addr);
-				j++;
-
-				/*
-				 * It is possible that the number of elements
-				 * in the bounce buffer may not be equal to
-				 * the number of elements in the original
-				 * scatter list. Handle this correctly.
-				 */
-
-				if (j == bounce_sgl_count) {
-					/*
-					 * We are done; cleanup and return.
-					 */
-					kunmap_atomic((void *)(dest_addr -
-						cur_dest_sgl->offset));
-					local_irq_restore(flags);
-					return total_copied;
-				}
-
-				/* if we need to use another bounce buffer */
-				if (destlen || i != orig_sgl_count - 1) {
-					cur_src_sgl = sg_next(cur_src_sgl);
-					bounce_addr = (unsigned long)
-							kmap_atomic(
-							sg_page(cur_src_sgl));
-				}
-			} else if (destlen == 0 && i == orig_sgl_count - 1) {
-				/* unmap the last bounce that is < PAGE_SIZE */
-				kunmap_atomic((void *)bounce_addr);
-			}
-		}
-
-		kunmap_atomic((void *)(dest_addr - cur_dest_sgl->offset));
-		cur_dest_sgl = sg_next(cur_dest_sgl);
-	}
-
-	local_irq_restore(flags);
-
-	return total_copied;
-}
-
-/* Assume the bounce_sgl has enough room ie using the create_bounce_buffer() */
-static unsigned int copy_to_bounce_buffer(struct scatterlist *orig_sgl,
-					  struct scatterlist *bounce_sgl,
-					  unsigned int orig_sgl_count)
-{
-	int i;
-	int j = 0;
-	unsigned long src, dest;
-	unsigned int srclen, destlen, copylen;
-	unsigned int total_copied = 0;
-	unsigned long bounce_addr = 0;
-	unsigned long src_addr = 0;
-	unsigned long flags;
-	struct scatterlist *cur_src_sgl;
-	struct scatterlist *cur_dest_sgl;
-
-	local_irq_save(flags);
-
-	cur_src_sgl = orig_sgl;
-	cur_dest_sgl = bounce_sgl;
-
-	for (i = 0; i < orig_sgl_count; i++) {
-		src_addr = (unsigned long)
-				kmap_atomic(sg_page(cur_src_sgl)) +
-				cur_src_sgl->offset;
-		src = src_addr;
-		srclen = cur_src_sgl->length;
-
-		if (bounce_addr == 0)
-			bounce_addr = (unsigned long)
-					kmap_atomic(sg_page(cur_dest_sgl));
-
-		while (srclen) {
-			/* assume bounce offset always == 0 */
-			dest = bounce_addr + cur_dest_sgl->length;
-			destlen = PAGE_SIZE - cur_dest_sgl->length;
-
-			copylen = min(srclen, destlen);
-			memcpy((void *)dest, (void *)src, copylen);
-
-			total_copied += copylen;
-			cur_dest_sgl->length += copylen;
-			srclen -= copylen;
-			src += copylen;
-
-			if (cur_dest_sgl->length == PAGE_SIZE) {
-				/* full..move to next entry */
-				kunmap_atomic((void *)bounce_addr);
-				bounce_addr = 0;
-				j++;
-			}
-
-			/* if we need to use another bounce buffer */
-			if (srclen && bounce_addr == 0) {
-				cur_dest_sgl = sg_next(cur_dest_sgl);
-				bounce_addr = (unsigned long)
-						kmap_atomic(
-						sg_page(cur_dest_sgl));
-			}
-
-		}
-
-		kunmap_atomic((void *)(src_addr - cur_src_sgl->offset));
-		cur_src_sgl = sg_next(cur_src_sgl);
-	}
-
-	if (bounce_addr)
-		kunmap_atomic((void *)bounce_addr);
-
-	local_irq_restore(flags);
-
-	return total_copied;
-}
-
 static void handle_sc_creation(struct vmbus_channel *new_sc)
 {
 	struct hv_device *device = new_sc->primary_channel->device_obj;
@@ -1096,7 +861,7 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb,
 	void (*process_err_fn)(struct work_struct *work);
 	bool do_work = false;
 
-	switch (vm_srb->srb_status) {
+	switch (SRB_STATUS(vm_srb->srb_status)) {
 	case SRB_STATUS_ERROR:
 		/*
 		 * If there is an error; offline the device since all
@@ -1171,15 +936,6 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
 	host = stor_dev->host;
 
 	vm_srb = &cmd_request->vstor_packet.vm_srb;
-	if (cmd_request->bounce_sgl_count) {
-		if (vm_srb->data_in == READ_TYPE)
-			copy_from_bounce_buffer(scsi_sglist(scmnd),
-					cmd_request->bounce_sgl,
-					scsi_sg_count(scmnd),
-					cmd_request->bounce_sgl_count);
-		destroy_bounce_buffer(cmd_request->bounce_sgl,
-					cmd_request->bounce_sgl_count);
-	}
 
 	scmnd->result = vm_srb->scsi_status;
 
@@ -1474,6 +1230,9 @@ static int storvsc_device_configure(struct scsi_device *sdevice)
 
 	blk_queue_rq_timeout(sdevice->request_queue, (storvsc_timeout * HZ));
 
+	/* Ensure there are no gaps in presented sgls */
+	blk_queue_virt_boundary(sdevice->request_queue, PAGE_SIZE - 1);
+
 	sdevice->no_write_same = 1;
 
 	/*
@@ -1647,8 +1406,7 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 	vm_srb->win8_extension.time_out_value = 60;
 
 	vm_srb->win8_extension.srb_flags |=
-		(SRB_FLAGS_QUEUE_ACTION_ENABLE |
-		SRB_FLAGS_DISABLE_SYNCH_TRANSFER);
+		SRB_FLAGS_DISABLE_SYNCH_TRANSFER;
 
 	/* Build the SRB */
 	switch (scmnd->sc_data_direction) {
@@ -1692,40 +1450,13 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 	payload_sz = sizeof(cmd_request->mpb);
 
 	if (sg_count) {
-		/* check if we need to bounce the sgl */
-		if (do_bounce_buffer(sgl, scsi_sg_count(scmnd)) != -1) {
-			cmd_request->bounce_sgl =
-				create_bounce_buffer(sgl, sg_count,
-						     length,
-						     vm_srb->data_in);
-			if (!cmd_request->bounce_sgl)
-				return SCSI_MLQUEUE_HOST_BUSY;
-
-			cmd_request->bounce_sgl_count =
-				ALIGN(length, PAGE_SIZE) >> PAGE_SHIFT;
-
-			if (vm_srb->data_in == WRITE_TYPE)
-				copy_to_bounce_buffer(sgl,
-					cmd_request->bounce_sgl, sg_count);
-
-			sgl = cmd_request->bounce_sgl;
-			sg_count = cmd_request->bounce_sgl_count;
-		}
-
-
 		if (sg_count > MAX_PAGE_BUFFER_COUNT) {
 
 			payload_sz = (sg_count * sizeof(void *) +
 				      sizeof(struct vmbus_packet_mpb_array));
 			payload = kmalloc(payload_sz, GFP_ATOMIC);
-			if (!payload) {
-				if (cmd_request->bounce_sgl_count)
-					destroy_bounce_buffer(
-					cmd_request->bounce_sgl,
-					cmd_request->bounce_sgl_count);
-
-					return SCSI_MLQUEUE_DEVICE_BUSY;
-			}
+			if (!payload)
+				return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
 
 		payload->range.len = length;
@@ -1754,11 +1485,6 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 
 	if (ret == -EAGAIN) {
 		/* no more space */
-
-		if (cmd_request->bounce_sgl_count)
-			destroy_bounce_buffer(cmd_request->bounce_sgl,
-					cmd_request->bounce_sgl_count);
-
 		return SCSI_MLQUEUE_DEVICE_BUSY;
 	}
 
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index e94538362..5f4530744 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -72,7 +72,7 @@ config SCSI_UFSHCD_PLATFORM
 	  If unsure, say N.
 
 config SCSI_UFS_QCOM
-	bool "QCOM specific hooks to UFS controller platform driver"
+	tristate "QCOM specific hooks to UFS controller platform driver"
 	depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
 	select PHY_QCOM_UFS
 	help
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 4cdffa46d..4f38d008b 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -19,16 +19,44 @@
 
 #include <linux/phy/phy-qcom-ufs.h>
 #include "ufshcd.h"
+#include "ufshcd-pltfrm.h"
 #include "unipro.h"
 #include "ufs-qcom.h"
 #include "ufshci.h"
+#define UFS_QCOM_DEFAULT_DBG_PRINT_EN	\
+	(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
+
+enum {
+	TSTBUS_UAWM,
+	TSTBUS_UARM,
+	TSTBUS_TXUC,
+	TSTBUS_RXUC,
+	TSTBUS_DFC,
+	TSTBUS_TRLUT,
+	TSTBUS_TMRLUT,
+	TSTBUS_OCSC,
+	TSTBUS_UTP_HCI,
+	TSTBUS_COMBINED,
+	TSTBUS_WRAPPER,
+	TSTBUS_UNIPRO,
+	TSTBUS_MAX,
+};
 
 static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
 
-static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result);
-static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
-		const char *speed_mode);
 static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote);
+static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
+static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
+						       u32 clk_cycles);
+
+static void ufs_qcom_dump_regs(struct ufs_hba *hba, int offset, int len,
+		char *prefix)
+{
+	print_hex_dump(KERN_ERR, prefix,
+			len > 4 ? DUMP_PREFIX_OFFSET : DUMP_PREFIX_NONE,
+			16, 4, (void __force *)hba->mmio_base + offset,
+			len * 4, false);
+}
 
 static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes)
 {
@@ -149,13 +177,14 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
 
 	err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
 		&host->tx_l1_sync_clk);
+
 out:
 	return err;
 }
 
 static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
 {
-	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct phy *phy = host->generic_phy;
 	u32 tx_lanes;
 	int err = 0;
@@ -181,7 +210,9 @@ static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
 
 	do {
 		err = ufshcd_dme_get(hba,
-			UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val);
+				UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
+					UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
+				&tx_fsm_val);
 		if (err || tx_fsm_val == TX_FSM_HIBERN8)
 			break;
 
@@ -195,7 +226,9 @@ static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
 	 */
 	if (time_after(jiffies, timeout))
 		err = ufshcd_dme_get(hba,
-				UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val);
+				UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
+					UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
+				&tx_fsm_val);
 
 	if (err) {
 		dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
@@ -209,9 +242,18 @@ static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
 	return err;
 }
 
+static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
+{
+	ufshcd_rmwl(host->hba, QUNIPRO_SEL,
+		   ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0,
+		   REG_UFS_CFG1);
+	/* make sure above configuration is applied before we return */
+	mb();
+}
+
 static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 {
-	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct phy *phy = host->generic_phy;
 	int ret = 0;
 	bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B)
@@ -223,9 +265,11 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 	usleep_range(1000, 1100);
 
 	ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
+
 	if (ret) {
-		dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n",
-			__func__, ret);
+		dev_err(hba->dev,
+		"%s: ufs_qcom_phy_calibrate_phy()failed, ret = %d\n",
+		__func__, ret);
 		goto out;
 	}
 
@@ -246,9 +290,12 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 
 	ret = ufs_qcom_phy_is_pcs_ready(phy);
 	if (ret)
-		dev_err(hba->dev, "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
+		dev_err(hba->dev,
+			"%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
 			__func__, ret);
 
+	ufs_qcom_select_unipro_mode(host);
+
 out:
 	return ret;
 }
@@ -271,9 +318,10 @@ static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba)
 	mb();
 }
 
-static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, bool status)
+static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
+				      enum ufs_notify_change_status status)
 {
-	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	int err = 0;
 
 	switch (status) {
@@ -301,13 +349,13 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, bool status)
 }
 
 /**
- * Returns non-zero for success (which rate of core_clk) and 0
- * in case of a failure
+ * Returns zero for success and non-zero in case of a failure
  */
-static unsigned long
-ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
+static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
+			       u32 hs, u32 rate, bool update_link_startup_timer)
 {
-	struct ufs_qcom_host *host = hba->priv;
+	int ret = 0;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct ufs_clk_info *clki;
 	u32 core_clk_period_in_ns;
 	u32 tx_clk_cycles_per_us = 0;
@@ -324,11 +372,13 @@ ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
 	static u32 hs_fr_table_rA[][2] = {
 		{UFS_HS_G1, 0x1F},
 		{UFS_HS_G2, 0x3e},
+		{UFS_HS_G3, 0x7D},
 	};
 
 	static u32 hs_fr_table_rB[][2] = {
 		{UFS_HS_G1, 0x24},
 		{UFS_HS_G2, 0x49},
+		{UFS_HS_G3, 0x92},
 	};
 
 	/*
@@ -356,7 +406,17 @@ ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
 		core_clk_rate = DEFAULT_CLK_RATE_HZ;
 
 	core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC;
-	ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
+	if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) {
+		ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
+		/*
+		 * make sure above write gets applied before we return from
+		 * this function.
+		 */
+		mb();
+	}
+
+	if (ufs_qcom_cap_qunipro(host))
+		goto out;
 
 	core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate;
 	core_clk_period_in_ns <<= OFFSET_CLK_NS_REG;
@@ -406,35 +466,59 @@ ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
 		goto out_error;
 	}
 
-	/* this register 2 fields shall be written at once */
-	ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
-						REG_UFS_TX_SYMBOL_CLK_NS_US);
+	if (ufshcd_readl(hba, REG_UFS_TX_SYMBOL_CLK_NS_US) !=
+	    (core_clk_period_in_ns | tx_clk_cycles_per_us)) {
+		/* this register 2 fields shall be written at once */
+		ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
+			      REG_UFS_TX_SYMBOL_CLK_NS_US);
+		/*
+		 * make sure above write gets applied before we return from
+		 * this function.
+		 */
+		mb();
+	}
+
+	if (update_link_startup_timer) {
+		ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
+			      REG_UFS_PA_LINK_STARTUP_TIMER);
+		/*
+		 * make sure that this configuration is applied before
+		 * we return
+		 */
+		mb();
+	}
 	goto out;
 
 out_error:
-	core_clk_rate = 0;
+	ret = -EINVAL;
 out:
-	return core_clk_rate;
+	return ret;
 }
 
-static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, bool status)
+static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
+					enum ufs_notify_change_status status)
 {
-	unsigned long core_clk_rate = 0;
-	u32 core_clk_cycles_per_100ms;
+	int err = 0;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 
 	switch (status) {
 	case PRE_CHANGE:
-		core_clk_rate = ufs_qcom_cfg_timers(hba, UFS_PWM_G1,
-						    SLOWAUTO_MODE, 0);
-		if (!core_clk_rate) {
+		if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE,
+					0, true)) {
 			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
 				__func__);
-			return -EINVAL;
+			err = -EINVAL;
+			goto out;
 		}
-		core_clk_cycles_per_100ms =
-			(core_clk_rate / MSEC_PER_SEC) * 100;
-		ufshcd_writel(hba, core_clk_cycles_per_100ms,
-					REG_UFS_PA_LINK_STARTUP_TIMER);
+
+		if (ufs_qcom_cap_qunipro(host))
+			/*
+			 * set unipro core clock cycles to 150 & clear clock
+			 * divider
+			 */
+			err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
+									  150);
+
 		break;
 	case POST_CHANGE:
 		ufs_qcom_link_startup_post_change(hba);
@@ -443,12 +527,13 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, bool status)
 		break;
 	}
 
-	return 0;
+out:
+	return err;
 }
 
 static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
-	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct phy *phy = host->generic_phy;
 	int ret = 0;
 
@@ -470,8 +555,10 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	 * If UniPro link is not active, PHY ref_clk, main PHY analog power
 	 * rail and low noise analog power rail for PLL can be switched off.
 	 */
-	if (!ufs_qcom_is_link_active(hba))
+	if (!ufs_qcom_is_link_active(hba)) {
+		ufs_qcom_disable_lane_clks(host);
 		phy_power_off(phy);
+	}
 
 out:
 	return ret;
@@ -479,7 +566,7 @@ out:
 
 static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
-	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct phy *phy = host->generic_phy;
 	int err;
 
@@ -490,6 +577,10 @@ static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		goto out;
 	}
 
+	err = ufs_qcom_enable_lane_clks(host);
+	if (err)
+		goto out;
+
 	hba->is_sys_suspended = false;
 
 out:
@@ -594,6 +685,81 @@ static int ufs_qcom_get_pwr_dev_param(struct ufs_qcom_dev_params *qcom_param,
 	return 0;
 }
 
+#ifdef CONFIG_MSM_BUS_SCALING
+static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
+		const char *speed_mode)
+{
+	struct device *dev = host->hba->dev;
+	struct device_node *np = dev->of_node;
+	int err;
+	const char *key = "qcom,bus-vector-names";
+
+	if (!speed_mode) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN"))
+		err = of_property_match_string(np, key, "MAX");
+	else
+		err = of_property_match_string(np, key, speed_mode);
+
+out:
+	if (err < 0)
+		dev_err(dev, "%s: Invalid %s mode %d\n",
+				__func__, speed_mode, err);
+	return err;
+}
+
+static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
+{
+	int gear = max_t(u32, p->gear_rx, p->gear_tx);
+	int lanes = max_t(u32, p->lane_rx, p->lane_tx);
+	int pwr;
+
+	/* default to PWM Gear 1, Lane 1 if power mode is not initialized */
+	if (!gear)
+		gear = 1;
+
+	if (!lanes)
+		lanes = 1;
+
+	if (!p->pwr_rx && !p->pwr_tx) {
+		pwr = SLOWAUTO_MODE;
+		snprintf(result, BUS_VECTOR_NAME_LEN, "MIN");
+	} else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE ||
+		 p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) {
+		pwr = FAST_MODE;
+		snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS",
+			 p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes);
+	} else {
+		pwr = SLOW_MODE;
+		snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d",
+			 "PWM", gear, lanes);
+	}
+}
+
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+{
+	int err = 0;
+
+	if (vote != host->bus_vote.curr_vote) {
+		err = msm_bus_scale_client_update_request(
+				host->bus_vote.client_handle, vote);
+		if (err) {
+			dev_err(host->hba->dev,
+				"%s: msm_bus_scale_client_update_request() failed: bus_client_handle=0x%x, vote=%d, err=%d\n",
+				__func__, host->bus_vote.client_handle,
+				vote, err);
+			goto out;
+		}
+
+		host->bus_vote.curr_vote = vote;
+	}
+out:
+	return err;
+}
+
 static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
 {
 	int vote;
@@ -615,13 +781,137 @@ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
 	return err;
 }
 
+static ssize_t
+show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n",
+			host->bus_vote.is_max_bw_needed);
+}
+
+static ssize_t
+store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	uint32_t value;
+
+	if (!kstrtou32(buf, 0, &value)) {
+		host->bus_vote.is_max_bw_needed = !!value;
+		ufs_qcom_update_bus_bw_vote(host);
+	}
+
+	return count;
+}
+
+static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
+{
+	int err;
+	struct msm_bus_scale_pdata *bus_pdata;
+	struct device *dev = host->hba->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct device_node *np = dev->of_node;
+
+	bus_pdata = msm_bus_cl_get_pdata(pdev);
+	if (!bus_pdata) {
+		dev_err(dev, "%s: failed to get bus vectors\n", __func__);
+		err = -ENODATA;
+		goto out;
+	}
+
+	err = of_property_count_strings(np, "qcom,bus-vector-names");
+	if (err < 0 || err != bus_pdata->num_usecases) {
+		dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n",
+				__func__, err);
+		goto out;
+	}
+
+	host->bus_vote.client_handle = msm_bus_scale_register_client(bus_pdata);
+	if (!host->bus_vote.client_handle) {
+		dev_err(dev, "%s: msm_bus_scale_register_client failed\n",
+				__func__);
+		err = -EFAULT;
+		goto out;
+	}
+
+	/* cache the vote index for minimum and maximum bandwidth */
+	host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN");
+	host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX");
+
+	host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw;
+	host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw;
+	sysfs_attr_init(&host->bus_vote.max_bus_bw.attr);
+	host->bus_vote.max_bus_bw.attr.name = "max_bus_bw";
+	host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR;
+	err = device_create_file(dev, &host->bus_vote.max_bus_bw);
+out:
+	return err;
+}
+#else /* CONFIG_MSM_BUS_SCALING */
+static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
+{
+	return 0;
+}
+
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+{
+	return 0;
+}
+
+static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
+{
+	return 0;
+}
+#endif /* CONFIG_MSM_BUS_SCALING */
+
+static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable)
+{
+	if (host->dev_ref_clk_ctrl_mmio &&
+	    (enable ^ host->is_dev_ref_clk_enabled)) {
+		u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio);
+
+		if (enable)
+			temp |= host->dev_ref_clk_en_mask;
+		else
+			temp &= ~host->dev_ref_clk_en_mask;
+
+		/*
+		 * If we are here to disable this clock it might be immediately
+		 * after entering into hibern8 in which case we need to make
+		 * sure that device ref_clk is active at least 1us after the
+		 * hibern8 enter.
+		 */
+		if (!enable)
+			udelay(1);
+
+		writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio);
+
+		/* ensure that ref_clk is enabled/disabled before we return */
+		wmb();
+
+		/*
+		 * If we call hibern8 exit after this, we need to make sure that
+		 * device ref_clk is stable for at least 1us before the hibern8
+		 * exit command.
+		 */
+		if (enable)
+			udelay(1);
+
+		host->is_dev_ref_clk_enabled = enable;
+	}
+}
+
 static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
-				bool status,
+				enum ufs_notify_change_status status,
 				struct ufs_pa_layer_attr *dev_max_params,
 				struct ufs_pa_layer_attr *dev_req_params)
 {
 	u32 val;
-	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct phy *phy = host->generic_phy;
 	struct ufs_qcom_dev_params ufs_qcom_cap;
 	int ret = 0;
@@ -649,6 +939,20 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 		ufs_qcom_cap.desired_working_mode =
 					UFS_QCOM_LIMIT_DESIRED_MODE;
 
+		if (host->hw_ver.major == 0x1) {
+			/*
+			 * HS-G3 operations may not reliably work on legacy QCOM
+			 * UFS host controller hardware even though capability
+			 * exchange during link startup phase may end up
+			 * negotiating maximum supported gear as G3.
+			 * Hence downgrade the maximum supported gear to HS-G2.
+			 */
+			if (ufs_qcom_cap.hs_tx_gear > UFS_HS_G2)
+				ufs_qcom_cap.hs_tx_gear = UFS_HS_G2;
+			if (ufs_qcom_cap.hs_rx_gear > UFS_HS_G2)
+				ufs_qcom_cap.hs_rx_gear = UFS_HS_G2;
+		}
+
 		ret = ufs_qcom_get_pwr_dev_param(&ufs_qcom_cap,
 						 dev_max_params,
 						 dev_req_params);
@@ -660,9 +964,9 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 
 		break;
 	case POST_CHANGE:
-		if (!ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
+		if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
 					dev_req_params->pwr_rx,
-					dev_req_params->hs_rate)) {
+					dev_req_params->hs_rate, false)) {
 			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
 				__func__);
 			/*
@@ -696,7 +1000,7 @@ out:
 
 static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
 {
-	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 
 	if (host->hw_ver.major == 0x1)
 		return UFSHCI_VERSION_11;
@@ -715,7 +1019,7 @@ static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
  */
 static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
 {
-	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 
 	if (host->hw_ver.major == 0x01) {
 		hba->quirks |= UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
@@ -724,10 +1028,11 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
 
 		if (host->hw_ver.minor == 0x0001 && host->hw_ver.step == 0x0001)
 			hba->quirks |= UFSHCD_QUIRK_BROKEN_INTR_AGGR;
+
+		hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC;
 	}
 
 	if (host->hw_ver.major >= 0x2) {
-		hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC;
 		hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION;
 
 		if (!ufs_qcom_cap_qunipro(host))
@@ -740,79 +1045,29 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
 
 static void ufs_qcom_set_caps(struct ufs_hba *hba)
 {
-	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 
-	if (host->hw_ver.major >= 0x2)
-		host->caps = UFS_QCOM_CAP_QUNIPRO;
-}
-
-static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
-		const char *speed_mode)
-{
-	struct device *dev = host->hba->dev;
-	struct device_node *np = dev->of_node;
-	int err;
-	const char *key = "qcom,bus-vector-names";
-
-	if (!speed_mode) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN"))
-		err = of_property_match_string(np, key, "MAX");
-	else
-		err = of_property_match_string(np, key, speed_mode);
-
-out:
-	if (err < 0)
-		dev_err(dev, "%s: Invalid %s mode %d\n",
-				__func__, speed_mode, err);
-	return err;
-}
-
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
-{
-	int err = 0;
-
-	if (vote != host->bus_vote.curr_vote)
-		host->bus_vote.curr_vote = vote;
-
-	return err;
-}
-
-static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
-{
-	int gear = max_t(u32, p->gear_rx, p->gear_tx);
-	int lanes = max_t(u32, p->lane_rx, p->lane_tx);
-	int pwr;
-
-	/* default to PWM Gear 1, Lane 1 if power mode is not initialized */
-	if (!gear)
-		gear = 1;
-
-	if (!lanes)
-		lanes = 1;
+	hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
+	hba->caps |= UFSHCD_CAP_CLK_SCALING;
+	hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
 
-	if (!p->pwr_rx && !p->pwr_tx) {
-		pwr = SLOWAUTO_MODE;
-		snprintf(result, BUS_VECTOR_NAME_LEN, "MIN");
-	} else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE ||
-		 p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) {
-		pwr = FAST_MODE;
-		snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS",
-			 p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes);
-	} else {
-		pwr = SLOW_MODE;
-		snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d",
-			 "PWM", gear, lanes);
+	if (host->hw_ver.major >= 0x2) {
+		host->caps = UFS_QCOM_CAP_QUNIPRO |
+			     UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE;
 	}
 }
 
+/**
+ * ufs_qcom_setup_clocks - enables/disable clocks
+ * @hba: host controller instance
+ * @on: If true, enable clocks else disable them.
+ *
+ * Returns 0 on success, non-zero on failure.
+ */
 static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
 {
-	struct ufs_qcom_host *host = hba->priv;
-	int err = 0;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	int err;
 	int vote = 0;
 
 	/*
@@ -835,20 +1090,18 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
 			ufs_qcom_phy_disable_iface_clk(host->generic_phy);
 			goto out;
 		}
-		/* enable the device ref clock */
-		ufs_qcom_phy_enable_dev_ref_clk(host->generic_phy);
 		vote = host->bus_vote.saved_vote;
 		if (vote == host->bus_vote.min_bw_vote)
 			ufs_qcom_update_bus_bw_vote(host);
+
 	} else {
+
 		/* M-PHY RMMI interface clocks can be turned off */
 		ufs_qcom_phy_disable_iface_clk(host->generic_phy);
-		if (!ufs_qcom_is_link_active(hba)) {
-			/* turn off UFS local PHY ref_clk */
-			ufs_qcom_phy_disable_ref_clk(host->generic_phy);
+		if (!ufs_qcom_is_link_active(hba))
 			/* disable device ref_clk */
-			ufs_qcom_phy_disable_dev_ref_clk(host->generic_phy);
-		}
+			ufs_qcom_dev_ref_clk_ctrl(host, false);
+
 		vote = host->bus_vote.min_bw_vote;
 	}
 
@@ -861,68 +1114,17 @@ out:
 	return err;
 }
 
-static ssize_t
-show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
-			char *buf)
-{
-	struct ufs_hba *hba = dev_get_drvdata(dev);
-	struct ufs_qcom_host *host = hba->priv;
-
-	return snprintf(buf, PAGE_SIZE, "%u\n",
-			host->bus_vote.is_max_bw_needed);
-}
-
-static ssize_t
-store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct ufs_hba *hba = dev_get_drvdata(dev);
-	struct ufs_qcom_host *host = hba->priv;
-	uint32_t value;
-
-	if (!kstrtou32(buf, 0, &value)) {
-		host->bus_vote.is_max_bw_needed = !!value;
-		ufs_qcom_update_bus_bw_vote(host);
-	}
-
-	return count;
-}
-
-static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
-{
-	int err;
-	struct device *dev = host->hba->dev;
-	struct device_node *np = dev->of_node;
-
-	err = of_property_count_strings(np, "qcom,bus-vector-names");
-	if (err < 0 ) {
-		dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n",
-				__func__, err);
-		goto out;
-	}
-
-	/* cache the vote index for minimum and maximum bandwidth */
-	host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN");
-	host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX");
-
-	host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw;
-	host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw;
-	sysfs_attr_init(&host->bus_vote.max_bus_bw.attr);
-	host->bus_vote.max_bus_bw.attr.name = "max_bus_bw";
-	host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR;
-	err = device_create_file(dev, &host->bus_vote.max_bus_bw);
-out:
-	return err;
-}
-
 #define	ANDROID_BOOT_DEV_MAX	30
 static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
-static int get_android_boot_dev(char *str)
+
+#ifndef MODULE
+static int __init get_android_boot_dev(char *str)
 {
 	strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
 	return 1;
 }
 __setup("androidboot.bootdevice=", get_android_boot_dev);
+#endif
 
 /**
  * ufs_qcom_init - bind phy with controller
@@ -938,7 +1140,9 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 {
 	int err;
 	struct device *dev = hba->dev;
+	struct platform_device *pdev = to_platform_device(dev);
 	struct ufs_qcom_host *host;
+	struct resource *res;
 
 	if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
 		return -ENODEV;
@@ -950,9 +1154,15 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 		goto out;
 	}
 
+	/* Make a two way bind between the qcom host and the hba */
 	host->hba = hba;
-	hba->priv = (void *)host;
+	ufshcd_set_variant(hba, host);
 
+	/*
+	 * voting/devoting device ref_clk source is time consuming hence
+	 * skip devoting it during aggressive clock gating. This clock
+	 * will still be gated off during runtime suspend.
+	 */
 	host->generic_phy = devm_phy_get(dev, "ufsphy");
 
 	if (IS_ERR(host->generic_phy)) {
@@ -968,6 +1178,30 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 	ufs_qcom_get_controller_revision(hba, &host->hw_ver.major,
 		&host->hw_ver.minor, &host->hw_ver.step);
 
+	/*
+	 * for newer controllers, device reference clock control bit has
+	 * moved inside UFS controller register address space itself.
+	 */
+	if (host->hw_ver.major >= 0x02) {
+		host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1;
+		host->dev_ref_clk_en_mask = BIT(26);
+	} else {
+		/* "dev_ref_clk_ctrl_mem" is optional resource */
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		if (res) {
+			host->dev_ref_clk_ctrl_mmio =
+					devm_ioremap_resource(dev, res);
+			if (IS_ERR(host->dev_ref_clk_ctrl_mmio)) {
+				dev_warn(dev,
+					"%s: could not map dev_ref_clk_ctrl_mmio, err %ld\n",
+					__func__,
+					PTR_ERR(host->dev_ref_clk_ctrl_mmio));
+				host->dev_ref_clk_ctrl_mmio = NULL;
+			}
+			host->dev_ref_clk_en_mask = BIT(5);
+		}
+	}
+
 	/* update phy revision information before calling phy_init() */
 	ufs_qcom_phy_save_controller_version(host->generic_phy,
 		host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
@@ -984,14 +1218,20 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 	ufs_qcom_set_caps(hba);
 	ufs_qcom_advertise_quirks(hba);
 
-	hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_CLK_SCALING;
-	hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
-
 	ufs_qcom_setup_clocks(hba, true);
 
 	if (hba->dev->id < MAX_UFS_QCOM_HOSTS)
 		ufs_qcom_hosts[hba->dev->id] = host;
 
+	host->dbg_print_en |= UFS_QCOM_DEFAULT_DBG_PRINT_EN;
+	ufs_qcom_get_default_testbus_cfg(host);
+	err = ufs_qcom_testbus_config(host);
+	if (err) {
+		dev_warn(dev, "%s: failed to configure the testbus %d\n",
+				__func__, err);
+		err = 0;
+	}
+
 	goto out;
 
 out_disable_phy:
@@ -1000,40 +1240,266 @@ out_unregister_bus:
 	phy_exit(host->generic_phy);
 out_host_free:
 	devm_kfree(dev, host);
-	hba->priv = NULL;
+	ufshcd_set_variant(hba, NULL);
 out:
 	return err;
 }
 
 static void ufs_qcom_exit(struct ufs_hba *hba)
 {
-	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 
 	ufs_qcom_disable_lane_clks(host);
 	phy_power_off(host->generic_phy);
 }
 
-static
-void ufs_qcom_clk_scale_notify(struct ufs_hba *hba)
+static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
+						       u32 clk_cycles)
+{
+	int err;
+	u32 core_clk_ctrl_reg;
+
+	if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK)
+		return -EINVAL;
+
+	err = ufshcd_dme_get(hba,
+			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+			    &core_clk_ctrl_reg);
+	if (err)
+		goto out;
+
+	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
+	core_clk_ctrl_reg |= clk_cycles;
+
+	/* Clear CORE_CLK_DIV_EN */
+	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+
+	err = ufshcd_dme_set(hba,
+			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+			    core_clk_ctrl_reg);
+out:
+	return err;
+}
+
+static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
+{
+	/* nothing to do as of now */
+	return 0;
+}
+
+static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+	if (!ufs_qcom_cap_qunipro(host))
+		return 0;
+
+	/* set unipro core clock cycles to 150 and clear clock divider */
+	return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150);
+}
+
+static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	int err;
+	u32 core_clk_ctrl_reg;
+
+	if (!ufs_qcom_cap_qunipro(host))
+		return 0;
+
+	err = ufshcd_dme_get(hba,
+			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+			    &core_clk_ctrl_reg);
+
+	/* make sure CORE_CLK_DIV_EN is cleared */
+	if (!err &&
+	    (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) {
+		core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+		err = ufshcd_dme_set(hba,
+				    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+				    core_clk_ctrl_reg);
+	}
+
+	return err;
+}
+
+static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+	if (!ufs_qcom_cap_qunipro(host))
+		return 0;
+
+	/* set unipro core clock cycles to 75 and clear clock divider */
+	return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75);
+}
+
+static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
+		bool scale_up, enum ufs_notify_change_status status)
 {
-	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
+	int err = 0;
 
-	if (!dev_req_params)
-		return;
+	if (status == PRE_CHANGE) {
+		if (scale_up)
+			err = ufs_qcom_clk_scale_up_pre_change(hba);
+		else
+			err = ufs_qcom_clk_scale_down_pre_change(hba);
+	} else {
+		if (scale_up)
+			err = ufs_qcom_clk_scale_up_post_change(hba);
+		else
+			err = ufs_qcom_clk_scale_down_post_change(hba);
 
-	ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
-				dev_req_params->pwr_rx,
-				dev_req_params->hs_rate);
+		if (err || !dev_req_params)
+			goto out;
+
+		ufs_qcom_cfg_timers(hba,
+				    dev_req_params->gear_rx,
+				    dev_req_params->pwr_rx,
+				    dev_req_params->hs_rate,
+				    false);
+		ufs_qcom_update_bus_bw_vote(host);
+	}
+
+out:
+	return err;
 }
 
+static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host)
+{
+	/* provide a legal default configuration */
+	host->testbus.select_major = TSTBUS_UAWM;
+	host->testbus.select_minor = 1;
+}
+
+static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host)
+{
+	if (host->testbus.select_major >= TSTBUS_MAX) {
+		dev_err(host->hba->dev,
+			"%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n",
+			__func__, host->testbus.select_major);
+		return false;
+	}
+
+	/*
+	 * Not performing check for each individual select_major
+	 * mappings of select_minor, since there is no harm in
+	 * configuring a non-existent select_minor
+	 */
+	if (host->testbus.select_minor > 0x1F) {
+		dev_err(host->hba->dev,
+			"%s: 0x%05X is not a legal testbus option\n",
+			__func__, host->testbus.select_minor);
+		return false;
+	}
+
+	return true;
+}
+
+int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
+{
+	int reg;
+	int offset;
+	u32 mask = TEST_BUS_SUB_SEL_MASK;
+
+	if (!host)
+		return -EINVAL;
+
+	if (!ufs_qcom_testbus_cfg_is_ok(host))
+		return -EPERM;
+
+	switch (host->testbus.select_major) {
+	case TSTBUS_UAWM:
+		reg = UFS_TEST_BUS_CTRL_0;
+		offset = 24;
+		break;
+	case TSTBUS_UARM:
+		reg = UFS_TEST_BUS_CTRL_0;
+		offset = 16;
+		break;
+	case TSTBUS_TXUC:
+		reg = UFS_TEST_BUS_CTRL_0;
+		offset = 8;
+		break;
+	case TSTBUS_RXUC:
+		reg = UFS_TEST_BUS_CTRL_0;
+		offset = 0;
+		break;
+	case TSTBUS_DFC:
+		reg = UFS_TEST_BUS_CTRL_1;
+		offset = 24;
+		break;
+	case TSTBUS_TRLUT:
+		reg = UFS_TEST_BUS_CTRL_1;
+		offset = 16;
+		break;
+	case TSTBUS_TMRLUT:
+		reg = UFS_TEST_BUS_CTRL_1;
+		offset = 8;
+		break;
+	case TSTBUS_OCSC:
+		reg = UFS_TEST_BUS_CTRL_1;
+		offset = 0;
+		break;
+	case TSTBUS_WRAPPER:
+		reg = UFS_TEST_BUS_CTRL_2;
+		offset = 16;
+		break;
+	case TSTBUS_COMBINED:
+		reg = UFS_TEST_BUS_CTRL_2;
+		offset = 8;
+		break;
+	case TSTBUS_UTP_HCI:
+		reg = UFS_TEST_BUS_CTRL_2;
+		offset = 0;
+		break;
+	case TSTBUS_UNIPRO:
+		reg = UFS_UNIPRO_CFG;
+		offset = 1;
+		break;
+	/*
+	 * No need for a default case, since
+	 * ufs_qcom_testbus_cfg_is_ok() checks that the configuration
+	 * is legal
+	 */
+	}
+	mask <<= offset;
+
+	pm_runtime_get_sync(host->hba->dev);
+	ufshcd_hold(host->hba, false);
+	ufshcd_rmwl(host->hba, TEST_BUS_SEL,
+		    (u32)host->testbus.select_major << 19,
+		    REG_UFS_CFG1);
+	ufshcd_rmwl(host->hba, mask,
+		    (u32)host->testbus.select_minor << offset,
+		    reg);
+	ufshcd_release(host->hba);
+	pm_runtime_put_sync(host->hba->dev);
+
+	return 0;
+}
+
+static void ufs_qcom_testbus_read(struct ufs_hba *hba)
+{
+	ufs_qcom_dump_regs(hba, UFS_TEST_BUS, 1, "UFS_TEST_BUS ");
+}
+
+static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
+{
+	ufs_qcom_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16,
+			"HCI Vendor Specific Registers ");
+
+	ufs_qcom_testbus_read(hba);
+}
 /**
  * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
  *
  * The variant operations configure the necessary controller and PHY
  * handshake during initialization.
  */
-static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
+static struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
 	.name                   = "qcom",
 	.init                   = ufs_qcom_init,
 	.exit                   = ufs_qcom_exit,
@@ -1045,5 +1511,66 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
 	.pwr_change_notify	= ufs_qcom_pwr_change_notify,
 	.suspend		= ufs_qcom_suspend,
 	.resume			= ufs_qcom_resume,
+	.dbg_register_dump	= ufs_qcom_dump_dbg_regs,
+};
+
+/**
+ * ufs_qcom_probe - probe routine of the driver
+ * @pdev: pointer to Platform device handle
+ *
+ * Return zero for success and non-zero for failure
+ */
+static int ufs_qcom_probe(struct platform_device *pdev)
+{
+	int err;
+	struct device *dev = &pdev->dev;
+
+	/* Perform generic probe */
+	err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops);
+	if (err)
+		dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
+
+	return err;
+}
+
+/**
+ * ufs_qcom_remove - set driver_data of the device to NULL
+ * @pdev: pointer to platform device handle
+ *
+ * Always return 0
+ */
+static int ufs_qcom_remove(struct platform_device *pdev)
+{
+	struct ufs_hba *hba =  platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&(pdev)->dev);
+	ufshcd_remove(hba);
+	return 0;
+}
+
+static const struct of_device_id ufs_qcom_of_match[] = {
+	{ .compatible = "qcom,ufshc"},
+	{},
+};
+
+static const struct dev_pm_ops ufs_qcom_pm_ops = {
+	.suspend	= ufshcd_pltfrm_suspend,
+	.resume		= ufshcd_pltfrm_resume,
+	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
+	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
 };
-EXPORT_SYMBOL(ufs_hba_qcom_vops);
+
+static struct platform_driver ufs_qcom_pltform = {
+	.probe	= ufs_qcom_probe,
+	.remove	= ufs_qcom_remove,
+	.shutdown = ufshcd_pltfrm_shutdown,
+	.driver	= {
+		.name	= "ufshcd-qcom",
+		.pm	= &ufs_qcom_pm_ops,
+		.of_match_table = of_match_ptr(ufs_qcom_of_match),
+	},
+};
+module_platform_driver(ufs_qcom_pltform);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
index db2c0a00e..36249b35f 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -35,8 +35,8 @@
 
 #define UFS_QCOM_LIMIT_NUM_LANES_RX	2
 #define UFS_QCOM_LIMIT_NUM_LANES_TX	2
-#define UFS_QCOM_LIMIT_HSGEAR_RX	UFS_HS_G2
-#define UFS_QCOM_LIMIT_HSGEAR_TX	UFS_HS_G2
+#define UFS_QCOM_LIMIT_HSGEAR_RX	UFS_HS_G3
+#define UFS_QCOM_LIMIT_HSGEAR_TX	UFS_HS_G3
 #define UFS_QCOM_LIMIT_PWMGEAR_RX	UFS_PWM_G4
 #define UFS_QCOM_LIMIT_PWMGEAR_TX	UFS_PWM_G4
 #define UFS_QCOM_LIMIT_RX_PWR_PWM	SLOW_MODE
@@ -58,6 +58,21 @@ enum {
 	REG_UFS_CFG2                        = 0xE0,
 	REG_UFS_HW_VERSION                  = 0xE4,
 
+	UFS_TEST_BUS				= 0xE8,
+	UFS_TEST_BUS_CTRL_0			= 0xEC,
+	UFS_TEST_BUS_CTRL_1			= 0xF0,
+	UFS_TEST_BUS_CTRL_2			= 0xF4,
+	UFS_UNIPRO_CFG				= 0xF8,
+
+	/*
+	 * QCOM UFS host controller vendor specific registers
+	 * added in HW Version 3.0.0
+	 */
+	UFS_AH8_CFG				= 0xFC,
+};
+
+/* QCOM UFS host controller vendor specific debug registers */
+enum {
 	UFS_DBG_RD_REG_UAWM			= 0x100,
 	UFS_DBG_RD_REG_UARM			= 0x200,
 	UFS_DBG_RD_REG_TXUC			= 0x300,
@@ -73,6 +88,14 @@ enum {
 	UFS_UFS_DBG_RD_EDTL_RAM			= 0x1900,
 };
 
+#define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x)	(0x000 + x)
+#define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x)	(0x400 + x)
+
+/* bit definitions for REG_UFS_CFG1 register */
+#define QUNIPRO_SEL	UFS_BIT(0)
+#define TEST_BUS_EN		BIT(18)
+#define TEST_BUS_SEL		GENMASK(22, 19)
+
 /* bit definitions for REG_UFS_CFG2 register */
 #define UAWM_HW_CGC_EN		(1 << 0)
 #define UARM_HW_CGC_EN		(1 << 1)
@@ -83,6 +106,9 @@ enum {
 #define TMRLUT_HW_CGC_EN	(1 << 6)
 #define OCSC_HW_CGC_EN		(1 << 7)
 
+/* bit definition for UFS_UFS_TEST_BUS_CTRL_n */
+#define TEST_BUS_SUB_SEL_MASK	0x1F  /* All XXX_SEL fields are 5 bits wide */
+
 #define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\
 				 TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\
 				 DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\
@@ -106,6 +132,21 @@ enum ufs_qcom_phy_init_type {
 	UFS_PHY_INIT_CFG_RESTORE,
 };
 
+/* QCOM UFS debug print bit mask */
+#define UFS_QCOM_DBG_PRINT_REGS_EN	BIT(0)
+#define UFS_QCOM_DBG_PRINT_ICE_REGS_EN	BIT(1)
+#define UFS_QCOM_DBG_PRINT_TEST_BUS_EN	BIT(2)
+
+#define UFS_QCOM_DBG_PRINT_ALL	\
+	(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_ICE_REGS_EN | \
+	 UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
+
+/* QUniPro Vendor specific attributes */
+#define DME_VS_CORE_CLK_CTRL	0xD002
+/* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
+#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT		BIT(8)
+#define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK	0xFF
+
 static inline void
 ufs_qcom_get_controller_revision(struct ufs_hba *hba,
 				 u8 *major, u16 *minor, u16 *step)
@@ -157,8 +198,13 @@ struct ufs_hw_version {
 	u16 minor;
 	u8 major;
 };
-struct ufs_qcom_host {
 
+struct ufs_qcom_testbus {
+	u8 select_major;
+	u8 select_minor;
+};
+
+struct ufs_qcom_host {
 	/*
 	 * Set this capability if host controller supports the QUniPro mode
 	 * and if driver wants the Host controller to operate in QUniPro mode.
@@ -166,6 +212,12 @@ struct ufs_qcom_host {
 	 * controller supports the QUniPro mode.
 	 */
 	#define UFS_QCOM_CAP_QUNIPRO	UFS_BIT(0)
+
+	/*
+	 * Set this capability if host controller can retain the secure
+	 * configuration even after UFS controller core power collapse.
+	 */
+	#define UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE	UFS_BIT(1)
 	u32 caps;
 
 	struct phy *generic_phy;
@@ -178,13 +230,23 @@ struct ufs_qcom_host {
 	struct clk *tx_l1_sync_clk;
 	bool is_lane_clks_enabled;
 
+	void __iomem *dev_ref_clk_ctrl_mmio;
+	bool is_dev_ref_clk_enabled;
 	struct ufs_hw_version hw_ver;
+
+	u32 dev_ref_clk_en_mask;
+
+	/* Bitmask for enabling debug prints */
+	u32 dbg_print_en;
+	struct ufs_qcom_testbus testbus;
 };
 
 #define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
 #define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
 #define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
 
+int ufs_qcom_testbus_config(struct ufs_qcom_host *host);
+
 static inline bool ufs_qcom_cap_qunipro(struct ufs_qcom_host *host)
 {
 	if (host->caps & UFS_QCOM_CAP_QUNIPRO)
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 7db9564f5..9714f2a8b 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -38,20 +38,7 @@
 #include <linux/of.h>
 
 #include "ufshcd.h"
-
-static const struct of_device_id ufs_of_match[];
-static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
-{
-	if (dev->of_node) {
-		const struct of_device_id *match;
-
-		match = of_match_node(ufs_of_match, dev->of_node);
-		if (match)
-			return (struct ufs_hba_variant_ops *)match->data;
-	}
-
-	return NULL;
-}
+#include "ufshcd-pltfrm.h"
 
 static int ufshcd_parse_clock_info(struct ufs_hba *hba)
 {
@@ -245,10 +232,11 @@ out:
  * Returns 0 if successful
  * Returns non-zero otherwise
  */
-static int ufshcd_pltfrm_suspend(struct device *dev)
+int ufshcd_pltfrm_suspend(struct device *dev)
 {
 	return ufshcd_system_suspend(dev_get_drvdata(dev));
 }
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_suspend);
 
 /**
  * ufshcd_pltfrm_resume - resume power management function
@@ -257,43 +245,47 @@ static int ufshcd_pltfrm_suspend(struct device *dev)
  * Returns 0 if successful
  * Returns non-zero otherwise
  */
-static int ufshcd_pltfrm_resume(struct device *dev)
+int ufshcd_pltfrm_resume(struct device *dev)
 {
 	return ufshcd_system_resume(dev_get_drvdata(dev));
 }
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_resume);
 
-static int ufshcd_pltfrm_runtime_suspend(struct device *dev)
+int ufshcd_pltfrm_runtime_suspend(struct device *dev)
 {
 	return ufshcd_runtime_suspend(dev_get_drvdata(dev));
 }
-static int ufshcd_pltfrm_runtime_resume(struct device *dev)
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_suspend);
+
+int ufshcd_pltfrm_runtime_resume(struct device *dev)
 {
 	return ufshcd_runtime_resume(dev_get_drvdata(dev));
 }
-static int ufshcd_pltfrm_runtime_idle(struct device *dev)
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_resume);
+
+int ufshcd_pltfrm_runtime_idle(struct device *dev)
 {
 	return ufshcd_runtime_idle(dev_get_drvdata(dev));
 }
-#else /* !CONFIG_PM */
-#define ufshcd_pltfrm_suspend	NULL
-#define ufshcd_pltfrm_resume	NULL
-#define ufshcd_pltfrm_runtime_suspend	NULL
-#define ufshcd_pltfrm_runtime_resume	NULL
-#define ufshcd_pltfrm_runtime_idle	NULL
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_idle);
+
 #endif /* CONFIG_PM */
 
-static void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
+void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
 {
 	ufshcd_shutdown((struct ufs_hba *)platform_get_drvdata(pdev));
 }
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_shutdown);
 
 /**
- * ufshcd_pltfrm_probe - probe routine of the driver
+ * ufshcd_pltfrm_init - probe routine of the driver
  * @pdev: pointer to Platform device handle
+ * @vops: pointer to variant ops
  *
  * Returns 0 on success, non-zero value on failure
  */
-static int ufshcd_pltfrm_probe(struct platform_device *pdev)
+int ufshcd_pltfrm_init(struct platform_device *pdev,
+		       struct ufs_hba_variant_ops *vops)
 {
 	struct ufs_hba *hba;
 	void __iomem *mmio_base;
@@ -321,19 +313,19 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	hba->vops = get_variant_ops(&pdev->dev);
+	hba->vops = vops;
 
 	err = ufshcd_parse_clock_info(hba);
 	if (err) {
 		dev_err(&pdev->dev, "%s: clock parse failed %d\n",
 				__func__, err);
-		goto out;
+		goto dealloc_host;
 	}
 	err = ufshcd_parse_regulator_info(hba);
 	if (err) {
 		dev_err(&pdev->dev, "%s: regulator init failed %d\n",
 				__func__, err);
-		goto out;
+		goto dealloc_host;
 	}
 
 	pm_runtime_set_active(&pdev->dev);
@@ -352,50 +344,12 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev)
 out_disable_rpm:
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
+dealloc_host:
+	ufshcd_dealloc_host(hba);
 out:
 	return err;
 }
-
-/**
- * ufshcd_pltfrm_remove - remove platform driver routine
- * @pdev: pointer to platform device handle
- *
- * Returns 0 on success, non-zero value on failure
- */
-static int ufshcd_pltfrm_remove(struct platform_device *pdev)
-{
-	struct ufs_hba *hba =  platform_get_drvdata(pdev);
-
-	pm_runtime_get_sync(&(pdev)->dev);
-	ufshcd_remove(hba);
-	return 0;
-}
-
-static const struct of_device_id ufs_of_match[] = {
-	{ .compatible = "jedec,ufs-1.1"},
-	{},
-};
-
-static const struct dev_pm_ops ufshcd_dev_pm_ops = {
-	.suspend	= ufshcd_pltfrm_suspend,
-	.resume		= ufshcd_pltfrm_resume,
-	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
-	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
-	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
-};
-
-static struct platform_driver ufshcd_pltfrm_driver = {
-	.probe	= ufshcd_pltfrm_probe,
-	.remove	= ufshcd_pltfrm_remove,
-	.shutdown = ufshcd_pltfrm_shutdown,
-	.driver	= {
-		.name	= "ufshcd",
-		.pm	= &ufshcd_dev_pm_ops,
-		.of_match_table = ufs_of_match,
-	},
-};
-
-module_platform_driver(ufshcd_pltfrm_driver);
+EXPORT_SYMBOL_GPL(ufshcd_pltfrm_init);
 
 MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
 MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/scsi/ufs/ufshcd-pltfrm.h
new file mode 100644
index 000000000..df64c4180
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.h
@@ -0,0 +1,41 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFSHCD_PLTFRM_H_
+#define UFSHCD_PLTFRM_H_
+
+#include "ufshcd.h"
+
+int ufshcd_pltfrm_init(struct platform_device *pdev,
+		       struct ufs_hba_variant_ops *vops);
+void ufshcd_pltfrm_shutdown(struct platform_device *pdev);
+
+#ifdef CONFIG_PM
+
+int ufshcd_pltfrm_suspend(struct device *dev);
+int ufshcd_pltfrm_resume(struct device *dev);
+int ufshcd_pltfrm_runtime_suspend(struct device *dev);
+int ufshcd_pltfrm_runtime_resume(struct device *dev);
+int ufshcd_pltfrm_runtime_idle(struct device *dev);
+
+#else /* !CONFIG_PM */
+
+#define ufshcd_pltfrm_suspend	NULL
+#define ufshcd_pltfrm_resume	NULL
+#define ufshcd_pltfrm_runtime_suspend	NULL
+#define ufshcd_pltfrm_runtime_resume	NULL
+#define ufshcd_pltfrm_runtime_idle	NULL
+
+#endif /* CONFIG_PM */
+
+#endif /* UFSHCD_PLTFRM_H_ */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b0ade73f8..85cd2564c 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -271,10 +271,8 @@ static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba)
  */
 static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba)
 {
-	if (hba->quirks & UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION) {
-		if (hba->vops && hba->vops->get_ufs_hci_version)
-			return hba->vops->get_ufs_hci_version(hba);
-	}
+	if (hba->quirks & UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION)
+		return ufshcd_vops_get_ufs_hci_version(hba);
 
 	return ufshcd_readl(hba, REG_UFS_VERSION);
 }
@@ -627,6 +625,7 @@ start:
 out:
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ufshcd_hold);
 
 static void ufshcd_gate_work(struct work_struct *work)
 {
@@ -714,6 +713,7 @@ void ufshcd_release(struct ufs_hba *hba)
 	__ufshcd_release(hba);
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 }
+EXPORT_SYMBOL_GPL(ufshcd_release);
 
 static ssize_t ufshcd_clkgate_delay_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
@@ -2473,9 +2473,8 @@ static int ufshcd_change_power_mode(struct ufs_hba *hba,
 		dev_err(hba->dev,
 			"%s: power mode change failed %d\n", __func__, ret);
 	} else {
-		if (hba->vops && hba->vops->pwr_change_notify)
-			hba->vops->pwr_change_notify(hba,
-				POST_CHANGE, NULL, pwr_mode);
+		ufshcd_vops_pwr_change_notify(hba, POST_CHANGE, NULL,
+								pwr_mode);
 
 		memcpy(&hba->pwr_info, pwr_mode,
 			sizeof(struct ufs_pa_layer_attr));
@@ -2495,10 +2494,10 @@ static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
 	struct ufs_pa_layer_attr final_params = { 0 };
 	int ret;
 
-	if (hba->vops && hba->vops->pwr_change_notify)
-		hba->vops->pwr_change_notify(hba,
-		     PRE_CHANGE, desired_pwr_mode, &final_params);
-	else
+	ret = ufshcd_vops_pwr_change_notify(hba, PRE_CHANGE,
+					desired_pwr_mode, &final_params);
+
+	if (ret)
 		memcpy(&final_params, desired_pwr_mode, sizeof(final_params));
 
 	ret = ufshcd_change_power_mode(hba, &final_params);
@@ -2647,8 +2646,7 @@ static int ufshcd_hba_enable(struct ufs_hba *hba)
 	/* UniPro link is disabled at this point */
 	ufshcd_set_link_off(hba);
 
-	if (hba->vops && hba->vops->hce_enable_notify)
-		hba->vops->hce_enable_notify(hba, PRE_CHANGE);
+	ufshcd_vops_hce_enable_notify(hba, PRE_CHANGE);
 
 	/* start controller initialization sequence */
 	ufshcd_hba_start(hba);
@@ -2681,8 +2679,7 @@ static int ufshcd_hba_enable(struct ufs_hba *hba)
 	/* enable UIC related interrupts */
 	ufshcd_enable_intr(hba, UFSHCD_UIC_MASK);
 
-	if (hba->vops && hba->vops->hce_enable_notify)
-		hba->vops->hce_enable_notify(hba, POST_CHANGE);
+	ufshcd_vops_hce_enable_notify(hba, POST_CHANGE);
 
 	return 0;
 }
@@ -2735,8 +2732,7 @@ static int ufshcd_link_startup(struct ufs_hba *hba)
 	int retries = DME_LINKSTARTUP_RETRIES;
 
 	do {
-		if (hba->vops && hba->vops->link_startup_notify)
-			hba->vops->link_startup_notify(hba, PRE_CHANGE);
+		ufshcd_vops_link_startup_notify(hba, PRE_CHANGE);
 
 		ret = ufshcd_dme_link_startup(hba);
 
@@ -2767,11 +2763,9 @@ static int ufshcd_link_startup(struct ufs_hba *hba)
 	}
 
 	/* Include any host controller configuration via UIC commands */
-	if (hba->vops && hba->vops->link_startup_notify) {
-		ret = hba->vops->link_startup_notify(hba, POST_CHANGE);
-		if (ret)
-			goto out;
-	}
+	ret = ufshcd_vops_link_startup_notify(hba, POST_CHANGE);
+	if (ret)
+		goto out;
 
 	ret = ufshcd_make_hba_operational(hba);
 out:
@@ -4355,7 +4349,6 @@ static struct scsi_host_template ufshcd_driver_template = {
 	.cmd_per_lun		= UFSHCD_CMD_PER_LUN,
 	.can_queue		= UFSHCD_CAN_QUEUE,
 	.max_host_blocked	= 1,
-	.use_blk_tags		= 1,
 	.track_queue_depth	= 1,
 };
 
@@ -4578,8 +4571,7 @@ static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
 		}
 	}
 
-	if (hba->vops && hba->vops->setup_clocks)
-		ret = hba->vops->setup_clocks(hba, on);
+	ret = ufshcd_vops_setup_clocks(hba, on);
 out:
 	if (ret) {
 		list_for_each_entry(clki, head, list) {
@@ -4645,27 +4637,22 @@ static int ufshcd_variant_hba_init(struct ufs_hba *hba)
 	if (!hba->vops)
 		goto out;
 
-	if (hba->vops->init) {
-		err = hba->vops->init(hba);
-		if (err)
-			goto out;
-	}
+	err = ufshcd_vops_init(hba);
+	if (err)
+		goto out;
 
-	if (hba->vops->setup_regulators) {
-		err = hba->vops->setup_regulators(hba, true);
-		if (err)
-			goto out_exit;
-	}
+	err = ufshcd_vops_setup_regulators(hba, true);
+	if (err)
+		goto out_exit;
 
 	goto out;
 
 out_exit:
-	if (hba->vops->exit)
-		hba->vops->exit(hba);
+	ufshcd_vops_exit(hba);
 out:
 	if (err)
 		dev_err(hba->dev, "%s: variant %s init failed err %d\n",
-			__func__, hba->vops ? hba->vops->name : "", err);
+			__func__, ufshcd_get_var_name(hba), err);
 	return err;
 }
 
@@ -4674,14 +4661,11 @@ static void ufshcd_variant_hba_exit(struct ufs_hba *hba)
 	if (!hba->vops)
 		return;
 
-	if (hba->vops->setup_clocks)
-		hba->vops->setup_clocks(hba, false);
+	ufshcd_vops_setup_clocks(hba, false);
 
-	if (hba->vops->setup_regulators)
-		hba->vops->setup_regulators(hba, false);
+	ufshcd_vops_setup_regulators(hba, false);
 
-	if (hba->vops->exit)
-		hba->vops->exit(hba);
+	ufshcd_vops_exit(hba);
 }
 
 static int ufshcd_hba_init(struct ufs_hba *hba)
@@ -5058,17 +5042,13 @@ disable_clks:
 	 * vendor specific host controller register space call them before the
 	 * host clocks are ON.
 	 */
-	if (hba->vops && hba->vops->suspend) {
-		ret = hba->vops->suspend(hba, pm_op);
-		if (ret)
-			goto set_link_active;
-	}
+	ret = ufshcd_vops_suspend(hba, pm_op);
+	if (ret)
+		goto set_link_active;
 
-	if (hba->vops && hba->vops->setup_clocks) {
-		ret = hba->vops->setup_clocks(hba, false);
-		if (ret)
-			goto vops_resume;
-	}
+	ret = ufshcd_vops_setup_clocks(hba, false);
+	if (ret)
+		goto vops_resume;
 
 	if (!ufshcd_is_link_active(hba))
 		ufshcd_setup_clocks(hba, false);
@@ -5079,7 +5059,7 @@ disable_clks:
 	hba->clk_gating.state = CLKS_OFF;
 	/*
 	 * Disable the host irq as host controller as there won't be any
-	 * host controller trasanction expected till resume.
+	 * host controller transaction expected till resume.
 	 */
 	ufshcd_disable_irq(hba);
 	/* Put the host controller in low power mode if possible */
@@ -5087,8 +5067,7 @@ disable_clks:
 	goto out;
 
 vops_resume:
-	if (hba->vops && hba->vops->resume)
-		hba->vops->resume(hba, pm_op);
+	ufshcd_vops_resume(hba, pm_op);
 set_link_active:
 	ufshcd_vreg_set_hpm(hba);
 	if (ufshcd_is_link_hibern8(hba) && !ufshcd_uic_hibern8_exit(hba))
@@ -5144,11 +5123,9 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	 * vendor specific host controller register space call them when the
 	 * host clocks are ON.
 	 */
-	if (hba->vops && hba->vops->resume) {
-		ret = hba->vops->resume(hba, pm_op);
-		if (ret)
-			goto disable_vreg;
-	}
+	ret = ufshcd_vops_resume(hba, pm_op);
+	if (ret)
+		goto disable_vreg;
 
 	if (ufshcd_is_link_hibern8(hba)) {
 		ret = ufshcd_uic_hibern8_exit(hba);
@@ -5189,8 +5166,7 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 set_old_link_state:
 	ufshcd_link_state_transition(hba, old_link_state, 0);
 vendor_suspend:
-	if (hba->vops && hba->vops->suspend)
-		hba->vops->suspend(hba, pm_op);
+	ufshcd_vops_suspend(hba, pm_op);
 disable_vreg:
 	ufshcd_vreg_set_lpm(hba);
 disable_irq_and_vops_clks:
@@ -5373,6 +5349,16 @@ void ufshcd_remove(struct ufs_hba *hba)
 EXPORT_SYMBOL_GPL(ufshcd_remove);
 
 /**
+ * ufshcd_dealloc_host - deallocate Host Bus Adapter (HBA)
+ * @hba: pointer to Host Bus Adapter (HBA)
+ */
+void ufshcd_dealloc_host(struct ufs_hba *hba)
+{
+	scsi_host_put(hba->host);
+}
+EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);
+
+/**
  * ufshcd_set_dma_mask - Set dma mask based on the controller
  *			 addressing capability
  * @hba: per adapter instance
@@ -5433,6 +5419,10 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
 	if (!head || list_empty(head))
 		goto out;
 
+	ret = ufshcd_vops_clk_scale_notify(hba, scale_up, PRE_CHANGE);
+	if (ret)
+		return ret;
+
 	list_for_each_entry(clki, head, list) {
 		if (!IS_ERR_OR_NULL(clki->clk)) {
 			if (scale_up && clki->max_freq) {
@@ -5463,8 +5453,9 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
 		dev_dbg(hba->dev, "%s: clk: %s, rate: %lu\n", __func__,
 				clki->name, clk_get_rate(clki->clk));
 	}
-	if (hba->vops->clk_scale_notify)
-		hba->vops->clk_scale_notify(hba);
+
+	ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE);
+
 out:
 	return ret;
 }
@@ -5619,13 +5610,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 		hba->is_irq_enabled = true;
 	}
 
-	/* Enable SCSI tag mapping */
-	err = scsi_init_shared_tag_map(host, host->can_queue);
-	if (err) {
-		dev_err(hba->dev, "init shared queue failed\n");
-		goto exit_gating;
-	}
-
 	err = scsi_add_host(host, hba->dev);
 	if (err) {
 		dev_err(hba->dev, "scsi_add_host failed\n");
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index c40a0e78a..2570d9477 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -223,8 +223,10 @@ struct ufs_clk_info {
 	bool enabled;
 };
 
-#define PRE_CHANGE      0
-#define POST_CHANGE     1
+enum ufs_notify_change_status {
+	PRE_CHANGE,
+	POST_CHANGE,
+};
 
 struct ufs_pa_layer_attr {
 	u32 gear_rx;
@@ -259,22 +261,28 @@ struct ufs_pwr_mode_info {
  *			to be set.
  * @suspend: called during host controller PM callback
  * @resume: called during host controller PM callback
+ * @dbg_register_dump: used to dump controller debug information
  */
 struct ufs_hba_variant_ops {
 	const char *name;
 	int	(*init)(struct ufs_hba *);
 	void    (*exit)(struct ufs_hba *);
 	u32	(*get_ufs_hci_version)(struct ufs_hba *);
-	void    (*clk_scale_notify)(struct ufs_hba *);
-	int     (*setup_clocks)(struct ufs_hba *, bool);
+	int	(*clk_scale_notify)(struct ufs_hba *, bool,
+				    enum ufs_notify_change_status);
+	int	(*setup_clocks)(struct ufs_hba *, bool);
 	int     (*setup_regulators)(struct ufs_hba *, bool);
-	int     (*hce_enable_notify)(struct ufs_hba *, bool);
-	int     (*link_startup_notify)(struct ufs_hba *, bool);
+	int	(*hce_enable_notify)(struct ufs_hba *,
+				     enum ufs_notify_change_status);
+	int	(*link_startup_notify)(struct ufs_hba *,
+				       enum ufs_notify_change_status);
 	int	(*pwr_change_notify)(struct ufs_hba *,
-					bool, struct ufs_pa_layer_attr *,
+					enum ufs_notify_change_status status,
+					struct ufs_pa_layer_attr *,
 					struct ufs_pa_layer_attr *);
 	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
 	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
+	void	(*dbg_register_dump)(struct ufs_hba *hba);
 };
 
 /* clock gating state  */
@@ -576,6 +584,7 @@ static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
 }
 
 int ufshcd_alloc_host(struct device *, struct ufs_hba **);
+void ufshcd_dealloc_host(struct ufs_hba *);
 int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
 void ufshcd_remove(struct ufs_hba *);
 
@@ -594,6 +603,27 @@ static inline void check_upiu_size(void)
 		GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE);
 }
 
+/**
+ * ufshcd_set_variant - set variant specific data to the hba
+ * @hba - per adapter instance
+ * @variant - pointer to variant specific data
+ */
+static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant)
+{
+	BUG_ON(!hba);
+	hba->priv = variant;
+}
+
+/**
+ * ufshcd_get_variant - get variant specific data from the hba
+ * @hba - per adapter instance
+ */
+static inline void *ufshcd_get_variant(struct ufs_hba *hba)
+{
+	BUG_ON(!hba);
+	return hba->priv;
+}
+
 extern int ufshcd_runtime_suspend(struct ufs_hba *hba);
 extern int ufshcd_runtime_resume(struct ufs_hba *hba);
 extern int ufshcd_runtime_idle(struct ufs_hba *hba);
@@ -653,4 +683,109 @@ static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
 
 int ufshcd_hold(struct ufs_hba *hba, bool async);
 void ufshcd_release(struct ufs_hba *hba);
+
+/* Wrapper functions for safely calling variant operations */
+static inline const char *ufshcd_get_var_name(struct ufs_hba *hba)
+{
+	if (hba->vops)
+		return hba->vops->name;
+	return "";
+}
+
+static inline int ufshcd_vops_init(struct ufs_hba *hba)
+{
+	if (hba->vops && hba->vops->init)
+		return hba->vops->init(hba);
+
+	return 0;
+}
+
+static inline void ufshcd_vops_exit(struct ufs_hba *hba)
+{
+	if (hba->vops && hba->vops->exit)
+		return hba->vops->exit(hba);
+}
+
+static inline u32 ufshcd_vops_get_ufs_hci_version(struct ufs_hba *hba)
+{
+	if (hba->vops && hba->vops->get_ufs_hci_version)
+		return hba->vops->get_ufs_hci_version(hba);
+
+	return ufshcd_readl(hba, REG_UFS_VERSION);
+}
+
+static inline int ufshcd_vops_clk_scale_notify(struct ufs_hba *hba,
+			bool up, enum ufs_notify_change_status status)
+{
+	if (hba->vops && hba->vops->clk_scale_notify)
+		return hba->vops->clk_scale_notify(hba, up, status);
+	return 0;
+}
+
+static inline int ufshcd_vops_setup_clocks(struct ufs_hba *hba, bool on)
+{
+	if (hba->vops && hba->vops->setup_clocks)
+		return hba->vops->setup_clocks(hba, on);
+	return 0;
+}
+
+static inline int ufshcd_vops_setup_regulators(struct ufs_hba *hba, bool status)
+{
+	if (hba->vops && hba->vops->setup_regulators)
+		return hba->vops->setup_regulators(hba, status);
+
+	return 0;
+}
+
+static inline int ufshcd_vops_hce_enable_notify(struct ufs_hba *hba,
+						bool status)
+{
+	if (hba->vops && hba->vops->hce_enable_notify)
+		return hba->vops->hce_enable_notify(hba, status);
+
+	return 0;
+}
+static inline int ufshcd_vops_link_startup_notify(struct ufs_hba *hba,
+						bool status)
+{
+	if (hba->vops && hba->vops->link_startup_notify)
+		return hba->vops->link_startup_notify(hba, status);
+
+	return 0;
+}
+
+static inline int ufshcd_vops_pwr_change_notify(struct ufs_hba *hba,
+				  bool status,
+				  struct ufs_pa_layer_attr *dev_max_params,
+				  struct ufs_pa_layer_attr *dev_req_params)
+{
+	if (hba->vops && hba->vops->pwr_change_notify)
+		return hba->vops->pwr_change_notify(hba, status,
+					dev_max_params, dev_req_params);
+
+	return -ENOTSUPP;
+}
+
+static inline int ufshcd_vops_suspend(struct ufs_hba *hba, enum ufs_pm_op op)
+{
+	if (hba->vops && hba->vops->suspend)
+		return hba->vops->suspend(hba, op);
+
+	return 0;
+}
+
+static inline int ufshcd_vops_resume(struct ufs_hba *hba, enum ufs_pm_op op)
+{
+	if (hba->vops && hba->vops->resume)
+		return hba->vops->resume(hba, op);
+
+	return 0;
+}
+
+static inline void ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
+{
+	if (hba->vops && hba->vops->dbg_register_dump)
+		hba->vops->dbg_register_dump(hba);
+}
+
 #endif /* End of Header */