Initial import

1 files changed, 1473 insertions, 0 deletions

diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c
new file mode 100644
index 000000000..a3d65b4f4
--- /dev/null
+++ b/drivers/spi/spi-bfin5xx.c
@@ -0,0 +1,1473 @@
+/*
+ * Blackfin On-Chip SPI Driver
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+
+#include <asm/dma.h>
+#include <asm/portmux.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/cacheflush.h>
+
+#define DRV_NAME	"bfin-spi"
+#define DRV_AUTHOR	"Bryan Wu, Luke Yang"
+#define DRV_DESC	"Blackfin on-chip SPI Controller Driver"
+#define DRV_VERSION	"1.0"
+
+MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_LICENSE("GPL");
+
+#define START_STATE	((void *)0)
+#define RUNNING_STATE	((void *)1)
+#define DONE_STATE	((void *)2)
+#define ERROR_STATE	((void *)-1)
+
+struct bfin_spi_master_data;
+
+struct bfin_spi_transfer_ops {
+	void (*write) (struct bfin_spi_master_data *);
+	void (*read) (struct bfin_spi_master_data *);
+	void (*duplex) (struct bfin_spi_master_data *);
+};
+
+struct bfin_spi_master_data {
+	/* Driver model hookup */
+	struct platform_device *pdev;
+
+	/* SPI framework hookup */
+	struct spi_master *master;
+
+	/* Regs base of SPI controller */
+	struct bfin_spi_regs __iomem *regs;
+
+	/* Pin request list */
+	u16 *pin_req;
+
+	/* BFIN hookup */
+	struct bfin5xx_spi_master *master_info;
+
+	/* Driver message queue */
+	struct workqueue_struct *workqueue;
+	struct work_struct pump_messages;
+	spinlock_t lock;
+	struct list_head queue;
+	int busy;
+	bool running;
+
+	/* Message Transfer pump */
+	struct tasklet_struct pump_transfers;
+
+	/* Current message transfer state info */
+	struct spi_message *cur_msg;
+	struct spi_transfer *cur_transfer;
+	struct bfin_spi_slave_data *cur_chip;
+	size_t len_in_bytes;
+	size_t len;
+	void *tx;
+	void *tx_end;
+	void *rx;
+	void *rx_end;
+
+	/* DMA stuffs */
+	int dma_channel;
+	int dma_mapped;
+	int dma_requested;
+	dma_addr_t rx_dma;
+	dma_addr_t tx_dma;
+
+	int irq_requested;
+	int spi_irq;
+
+	size_t rx_map_len;
+	size_t tx_map_len;
+	u8 n_bytes;
+	u16 ctrl_reg;
+	u16 flag_reg;
+
+	int cs_change;
+	const struct bfin_spi_transfer_ops *ops;
+};
+
+struct bfin_spi_slave_data {
+	u16 ctl_reg;
+	u16 baud;
+	u16 flag;
+
+	u8 chip_select_num;
+	u8 enable_dma;
+	u16 cs_chg_udelay;	/* Some devices require > 255usec delay */
+	u32 cs_gpio;
+	u16 idle_tx_val;
+	u8 pio_interrupt;	/* use spi data irq */
+	const struct bfin_spi_transfer_ops *ops;
+};
+
+static void bfin_spi_enable(struct bfin_spi_master_data *drv_data)
+{
+	bfin_write_or(&drv_data->regs->ctl, BIT_CTL_ENABLE);
+}
+
+static void bfin_spi_disable(struct bfin_spi_master_data *drv_data)
+{
+	bfin_write_and(&drv_data->regs->ctl, ~BIT_CTL_ENABLE);
+}
+
+/* Caculate the SPI_BAUD register value based on input HZ */
+static u16 hz_to_spi_baud(u32 speed_hz)
+{
+	u_long sclk = get_sclk();
+	u16 spi_baud = (sclk / (2 * speed_hz));
+
+	if ((sclk % (2 * speed_hz)) > 0)
+		spi_baud++;
+
+	if (spi_baud < MIN_SPI_BAUD_VAL)
+		spi_baud = MIN_SPI_BAUD_VAL;
+
+	return spi_baud;
+}
+
+static int bfin_spi_flush(struct bfin_spi_master_data *drv_data)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	/* wait for stop and clear stat */
+	while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF) && --limit)
+		cpu_relax();
+
+	bfin_write(&drv_data->regs->stat, BIT_STAT_CLR);
+
+	return limit;
+}
+
+/* Chip select operation functions for cs_change flag */
+static void bfin_spi_cs_active(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip)
+{
+	if (likely(chip->chip_select_num < MAX_CTRL_CS))
+		bfin_write_and(&drv_data->regs->flg, ~chip->flag);
+	else
+		gpio_set_value(chip->cs_gpio, 0);
+}
+
+static void bfin_spi_cs_deactive(struct bfin_spi_master_data *drv_data,
+                                 struct bfin_spi_slave_data *chip)
+{
+	if (likely(chip->chip_select_num < MAX_CTRL_CS))
+		bfin_write_or(&drv_data->regs->flg, chip->flag);
+	else
+		gpio_set_value(chip->cs_gpio, 1);
+
+	/* Move delay here for consistency */
+	if (chip->cs_chg_udelay)
+		udelay(chip->cs_chg_udelay);
+}
+
+/* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */
+static inline void bfin_spi_cs_enable(struct bfin_spi_master_data *drv_data,
+                                      struct bfin_spi_slave_data *chip)
+{
+	if (chip->chip_select_num < MAX_CTRL_CS)
+		bfin_write_or(&drv_data->regs->flg, chip->flag >> 8);
+}
+
+static inline void bfin_spi_cs_disable(struct bfin_spi_master_data *drv_data,
+                                       struct bfin_spi_slave_data *chip)
+{
+	if (chip->chip_select_num < MAX_CTRL_CS)
+		bfin_write_and(&drv_data->regs->flg, ~(chip->flag >> 8));
+}
+
+/* stop controller and re-config current chip*/
+static void bfin_spi_restore_state(struct bfin_spi_master_data *drv_data)
+{
+	struct bfin_spi_slave_data *chip = drv_data->cur_chip;
+
+	/* Clear status and disable clock */
+	bfin_write(&drv_data->regs->stat, BIT_STAT_CLR);
+	bfin_spi_disable(drv_data);
+	dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n");
+
+	SSYNC();
+
+	/* Load the registers */
+	bfin_write(&drv_data->regs->ctl, chip->ctl_reg);
+	bfin_write(&drv_data->regs->baud, chip->baud);
+
+	bfin_spi_enable(drv_data);
+	bfin_spi_cs_active(drv_data, chip);
+}
+
+/* used to kick off transfer in rx mode and read unwanted RX data */
+static inline void bfin_spi_dummy_read(struct bfin_spi_master_data *drv_data)
+{
+	(void) bfin_read(&drv_data->regs->rdbr);
+}
+
+static void bfin_spi_u8_writer(struct bfin_spi_master_data *drv_data)
+{
+	/* clear RXS (we check for RXS inside the loop) */
+	bfin_spi_dummy_read(drv_data);
+
+	while (drv_data->tx < drv_data->tx_end) {
+		bfin_write(&drv_data->regs->tdbr, (*(u8 *) (drv_data->tx++)));
+		/* wait until transfer finished.
+		   checking SPIF or TXS may not guarantee transfer completion */
+		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
+			cpu_relax();
+		/* discard RX data and clear RXS */
+		bfin_spi_dummy_read(drv_data);
+	}
+}
+
+static void bfin_spi_u8_reader(struct bfin_spi_master_data *drv_data)
+{
+	u16 tx_val = drv_data->cur_chip->idle_tx_val;
+
+	/* discard old RX data and clear RXS */
+	bfin_spi_dummy_read(drv_data);
+
+	while (drv_data->rx < drv_data->rx_end) {
+		bfin_write(&drv_data->regs->tdbr, tx_val);
+		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
+			cpu_relax();
+		*(u8 *) (drv_data->rx++) = bfin_read(&drv_data->regs->rdbr);
+	}
+}
+
+static void bfin_spi_u8_duplex(struct bfin_spi_master_data *drv_data)
+{
+	/* discard old RX data and clear RXS */
+	bfin_spi_dummy_read(drv_data);
+
+	while (drv_data->rx < drv_data->rx_end) {
+		bfin_write(&drv_data->regs->tdbr, (*(u8 *) (drv_data->tx++)));
+		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
+			cpu_relax();
+		*(u8 *) (drv_data->rx++) = bfin_read(&drv_data->regs->rdbr);
+	}
+}
+
+static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = {
+	.write  = bfin_spi_u8_writer,
+	.read   = bfin_spi_u8_reader,
+	.duplex = bfin_spi_u8_duplex,
+};
+
+static void bfin_spi_u16_writer(struct bfin_spi_master_data *drv_data)
+{
+	/* clear RXS (we check for RXS inside the loop) */
+	bfin_spi_dummy_read(drv_data);
+
+	while (drv_data->tx < drv_data->tx_end) {
+		bfin_write(&drv_data->regs->tdbr, (*(u16 *) (drv_data->tx)));
+		drv_data->tx += 2;
+		/* wait until transfer finished.
+		   checking SPIF or TXS may not guarantee transfer completion */
+		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
+			cpu_relax();
+		/* discard RX data and clear RXS */
+		bfin_spi_dummy_read(drv_data);
+	}
+}
+
+static void bfin_spi_u16_reader(struct bfin_spi_master_data *drv_data)
+{
+	u16 tx_val = drv_data->cur_chip->idle_tx_val;
+
+	/* discard old RX data and clear RXS */
+	bfin_spi_dummy_read(drv_data);
+
+	while (drv_data->rx < drv_data->rx_end) {
+		bfin_write(&drv_data->regs->tdbr, tx_val);
+		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
+			cpu_relax();
+		*(u16 *) (drv_data->rx) = bfin_read(&drv_data->regs->rdbr);
+		drv_data->rx += 2;
+	}
+}
+
+static void bfin_spi_u16_duplex(struct bfin_spi_master_data *drv_data)
+{
+	/* discard old RX data and clear RXS */
+	bfin_spi_dummy_read(drv_data);
+
+	while (drv_data->rx < drv_data->rx_end) {
+		bfin_write(&drv_data->regs->tdbr, (*(u16 *) (drv_data->tx)));
+		drv_data->tx += 2;
+		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
+			cpu_relax();
+		*(u16 *) (drv_data->rx) = bfin_read(&drv_data->regs->rdbr);
+		drv_data->rx += 2;
+	}
+}
+
+static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = {
+	.write  = bfin_spi_u16_writer,
+	.read   = bfin_spi_u16_reader,
+	.duplex = bfin_spi_u16_duplex,
+};
+
+/* test if there is more transfer to be done */
+static void *bfin_spi_next_transfer(struct bfin_spi_master_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	struct spi_transfer *trans = drv_data->cur_transfer;
+
+	/* Move to next transfer */
+	if (trans->transfer_list.next != &msg->transfers) {
+		drv_data->cur_transfer =
+		    list_entry(trans->transfer_list.next,
+			       struct spi_transfer, transfer_list);
+		return RUNNING_STATE;
+	} else
+		return DONE_STATE;
+}
+
+/*
+ * caller already set message->status;
+ * dma and pio irqs are blocked give finished message back
+ */
+static void bfin_spi_giveback(struct bfin_spi_master_data *drv_data)
+{
+	struct bfin_spi_slave_data *chip = drv_data->cur_chip;
+	unsigned long flags;
+	struct spi_message *msg;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+	msg = drv_data->cur_msg;
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	msg->state = NULL;
+
+	if (!drv_data->cs_change)
+		bfin_spi_cs_deactive(drv_data, chip);
+
+	/* Not stop spi in autobuffer mode */
+	if (drv_data->tx_dma != 0xFFFF)
+		bfin_spi_disable(drv_data);
+
+	if (msg->complete)
+		msg->complete(msg->context);
+}
+
+/* spi data irq handler */
+static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
+{
+	struct bfin_spi_master_data *drv_data = dev_id;
+	struct bfin_spi_slave_data *chip = drv_data->cur_chip;
+	struct spi_message *msg = drv_data->cur_msg;
+	int n_bytes = drv_data->n_bytes;
+	int loop = 0;
+
+	/* wait until transfer finished. */
+	while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS))
+		cpu_relax();
+
+	if ((drv_data->tx && drv_data->tx >= drv_data->tx_end) ||
+		(drv_data->rx && drv_data->rx >= (drv_data->rx_end - n_bytes))) {
+		/* last read */
+		if (drv_data->rx) {
+			dev_dbg(&drv_data->pdev->dev, "last read\n");
+			if (!(n_bytes % 2)) {
+				u16 *buf = (u16 *)drv_data->rx;
+				for (loop = 0; loop < n_bytes / 2; loop++)
+					*buf++ = bfin_read(&drv_data->regs->rdbr);
+			} else {
+				u8 *buf = (u8 *)drv_data->rx;
+				for (loop = 0; loop < n_bytes; loop++)
+					*buf++ = bfin_read(&drv_data->regs->rdbr);
+			}
+			drv_data->rx += n_bytes;
+		}
+
+		msg->actual_length += drv_data->len_in_bytes;
+		if (drv_data->cs_change)
+			bfin_spi_cs_deactive(drv_data, chip);
+		/* Move to next transfer */
+		msg->state = bfin_spi_next_transfer(drv_data);
+
+		disable_irq_nosync(drv_data->spi_irq);
+
+		/* Schedule transfer tasklet */
+		tasklet_schedule(&drv_data->pump_transfers);
+		return IRQ_HANDLED;
+	}
+
+	if (drv_data->rx && drv_data->tx) {
+		/* duplex */
+		dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n");
+		if (!(n_bytes % 2)) {
+			u16 *buf = (u16 *)drv_data->rx;
+			u16 *buf2 = (u16 *)drv_data->tx;
+			for (loop = 0; loop < n_bytes / 2; loop++) {
+				*buf++ = bfin_read(&drv_data->regs->rdbr);
+				bfin_write(&drv_data->regs->tdbr, *buf2++);
+			}
+		} else {
+			u8 *buf = (u8 *)drv_data->rx;
+			u8 *buf2 = (u8 *)drv_data->tx;
+			for (loop = 0; loop < n_bytes; loop++) {
+				*buf++ = bfin_read(&drv_data->regs->rdbr);
+				bfin_write(&drv_data->regs->tdbr, *buf2++);
+			}
+		}
+	} else if (drv_data->rx) {
+		/* read */
+		dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n");
+		if (!(n_bytes % 2)) {
+			u16 *buf = (u16 *)drv_data->rx;
+			for (loop = 0; loop < n_bytes / 2; loop++) {
+				*buf++ = bfin_read(&drv_data->regs->rdbr);
+				bfin_write(&drv_data->regs->tdbr, chip->idle_tx_val);
+			}
+		} else {
+			u8 *buf = (u8 *)drv_data->rx;
+			for (loop = 0; loop < n_bytes; loop++) {
+				*buf++ = bfin_read(&drv_data->regs->rdbr);
+				bfin_write(&drv_data->regs->tdbr, chip->idle_tx_val);
+			}
+		}
+	} else if (drv_data->tx) {
+		/* write */
+		dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n");
+		if (!(n_bytes % 2)) {
+			u16 *buf = (u16 *)drv_data->tx;
+			for (loop = 0; loop < n_bytes / 2; loop++) {
+				bfin_read(&drv_data->regs->rdbr);
+				bfin_write(&drv_data->regs->tdbr, *buf++);
+			}
+		} else {
+			u8 *buf = (u8 *)drv_data->tx;
+			for (loop = 0; loop < n_bytes; loop++) {
+				bfin_read(&drv_data->regs->rdbr);
+				bfin_write(&drv_data->regs->tdbr, *buf++);
+			}
+		}
+	}
+
+	if (drv_data->tx)
+		drv_data->tx += n_bytes;
+	if (drv_data->rx)
+		drv_data->rx += n_bytes;
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id)
+{
+	struct bfin_spi_master_data *drv_data = dev_id;
+	struct bfin_spi_slave_data *chip = drv_data->cur_chip;
+	struct spi_message *msg = drv_data->cur_msg;
+	unsigned long timeout;
+	unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel);
+	u16 spistat = bfin_read(&drv_data->regs->stat);
+
+	dev_dbg(&drv_data->pdev->dev,
+		"in dma_irq_handler dmastat:0x%x spistat:0x%x\n",
+		dmastat, spistat);
+
+	if (drv_data->rx != NULL) {
+		u16 cr = bfin_read(&drv_data->regs->ctl);
+		/* discard old RX data and clear RXS */
+		bfin_spi_dummy_read(drv_data);
+		bfin_write(&drv_data->regs->ctl, cr & ~BIT_CTL_ENABLE); /* Disable SPI */
+		bfin_write(&drv_data->regs->ctl, cr & ~BIT_CTL_TIMOD); /* Restore State */
+		bfin_write(&drv_data->regs->stat, BIT_STAT_CLR); /* Clear Status */
+	}
+
+	clear_dma_irqstat(drv_data->dma_channel);
+
+	/*
+	 * wait for the last transaction shifted out.  HRM states:
+	 * at this point there may still be data in the SPI DMA FIFO waiting
+	 * to be transmitted ... software needs to poll TXS in the SPI_STAT
+	 * register until it goes low for 2 successive reads
+	 */
+	if (drv_data->tx != NULL) {
+		while ((bfin_read(&drv_data->regs->stat) & BIT_STAT_TXS) ||
+		       (bfin_read(&drv_data->regs->stat) & BIT_STAT_TXS))
+			cpu_relax();
+	}
+
+	dev_dbg(&drv_data->pdev->dev,
+		"in dma_irq_handler dmastat:0x%x spistat:0x%x\n",
+		dmastat, bfin_read(&drv_data->regs->stat));
+
+	timeout = jiffies + HZ;
+	while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF))
+		if (!time_before(jiffies, timeout)) {
+			dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF\n");
+			break;
+		} else
+			cpu_relax();
+
+	if ((dmastat & DMA_ERR) && (spistat & BIT_STAT_RBSY)) {
+		msg->state = ERROR_STATE;
+		dev_err(&drv_data->pdev->dev, "dma receive: fifo/buffer overflow\n");
+	} else {
+		msg->actual_length += drv_data->len_in_bytes;
+
+		if (drv_data->cs_change)
+			bfin_spi_cs_deactive(drv_data, chip);
+
+		/* Move to next transfer */
+		msg->state = bfin_spi_next_transfer(drv_data);
+	}
+
+	/* Schedule transfer tasklet */
+	tasklet_schedule(&drv_data->pump_transfers);
+
+	/* free the irq handler before next transfer */
+	dev_dbg(&drv_data->pdev->dev,
+		"disable dma channel irq%d\n",
+		drv_data->dma_channel);
+	dma_disable_irq_nosync(drv_data->dma_channel);
+
+	return IRQ_HANDLED;
+}
+
+static void bfin_spi_pump_transfers(unsigned long data)
+{
+	struct bfin_spi_master_data *drv_data = (struct bfin_spi_master_data *)data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+	struct bfin_spi_slave_data *chip = NULL;
+	unsigned int bits_per_word;
+	u16 cr, cr_width = 0, dma_width, dma_config;
+	u32 tranf_success = 1;
+	u8 full_duplex = 0;
+
+	/* Get current state information */
+	message = drv_data->cur_msg;
+	transfer = drv_data->cur_transfer;
+	chip = drv_data->cur_chip;
+
+	/*
+	 * if msg is error or done, report it back using complete() callback
+	 */
+
+	 /* Handle for abort */
+	if (message->state == ERROR_STATE) {
+		dev_dbg(&drv_data->pdev->dev, "transfer: we've hit an error\n");
+		message->status = -EIO;
+		bfin_spi_giveback(drv_data);
+		return;
+	}
+
+	/* Handle end of message */
+	if (message->state == DONE_STATE) {
+		dev_dbg(&drv_data->pdev->dev, "transfer: all done!\n");
+		message->status = 0;
+		bfin_spi_flush(drv_data);
+		bfin_spi_giveback(drv_data);
+		return;
+	}
+
+	/* Delay if requested at end of transfer */
+	if (message->state == RUNNING_STATE) {
+		dev_dbg(&drv_data->pdev->dev, "transfer: still running ...\n");
+		previous = list_entry(transfer->transfer_list.prev,
+				      struct spi_transfer, transfer_list);
+		if (previous->delay_usecs)
+			udelay(previous->delay_usecs);
+	}
+
+	/* Flush any existing transfers that may be sitting in the hardware */
+	if (bfin_spi_flush(drv_data) == 0) {
+		dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
+		message->status = -EIO;
+		bfin_spi_giveback(drv_data);
+		return;
+	}
+
+	if (transfer->len == 0) {
+		/* Move to next transfer of this msg */
+		message->state = bfin_spi_next_transfer(drv_data);
+		/* Schedule next transfer tasklet */
+		tasklet_schedule(&drv_data->pump_transfers);
+		return;
+	}
+
+	if (transfer->tx_buf != NULL) {
+		drv_data->tx = (void *)transfer->tx_buf;
+		drv_data->tx_end = drv_data->tx + transfer->len;
+		dev_dbg(&drv_data->pdev->dev, "tx_buf is %p, tx_end is %p\n",
+			transfer->tx_buf, drv_data->tx_end);
+	} else {
+		drv_data->tx = NULL;
+	}
+
+	if (transfer->rx_buf != NULL) {
+		full_duplex = transfer->tx_buf != NULL;
+		drv_data->rx = transfer->rx_buf;
+		drv_data->rx_end = drv_data->rx + transfer->len;
+		dev_dbg(&drv_data->pdev->dev, "rx_buf is %p, rx_end is %p\n",
+			transfer->rx_buf, drv_data->rx_end);
+	} else {
+		drv_data->rx = NULL;
+	}
+
+	drv_data->rx_dma = transfer->rx_dma;
+	drv_data->tx_dma = transfer->tx_dma;
+	drv_data->len_in_bytes = transfer->len;
+	drv_data->cs_change = transfer->cs_change;
+
+	/* Bits per word setup */
+	bits_per_word = transfer->bits_per_word;
+	if (bits_per_word == 16) {
+		drv_data->n_bytes = bits_per_word/8;
+		drv_data->len = (transfer->len) >> 1;
+		cr_width = BIT_CTL_WORDSIZE;
+		drv_data->ops = &bfin_bfin_spi_transfer_ops_u16;
+	} else if (bits_per_word == 8) {
+		drv_data->n_bytes = bits_per_word/8;
+		drv_data->len = transfer->len;
+		drv_data->ops = &bfin_bfin_spi_transfer_ops_u8;
+	}
+	cr = bfin_read(&drv_data->regs->ctl) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE);
+	cr |= cr_width;
+	bfin_write(&drv_data->regs->ctl, cr);
+
+	dev_dbg(&drv_data->pdev->dev,
+		"transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n",
+		drv_data->ops, chip->ops, &bfin_bfin_spi_transfer_ops_u8);
+
+	message->state = RUNNING_STATE;
+	dma_config = 0;
+
+	/* Speed setup (surely valid because already checked) */
+	if (transfer->speed_hz)
+		bfin_write(&drv_data->regs->baud, hz_to_spi_baud(transfer->speed_hz));
+	else
+		bfin_write(&drv_data->regs->baud, chip->baud);
+
+	bfin_write(&drv_data->regs->stat, BIT_STAT_CLR);
+	bfin_spi_cs_active(drv_data, chip);
+
+	dev_dbg(&drv_data->pdev->dev,
+		"now pumping a transfer: width is %d, len is %d\n",
+		cr_width, transfer->len);
+
+	/*
+	 * Try to map dma buffer and do a dma transfer.  If successful use,
+	 * different way to r/w according to the enable_dma settings and if
+	 * we are not doing a full duplex transfer (since the hardware does
+	 * not support full duplex DMA transfers).
+	 */
+	if (!full_duplex && drv_data->cur_chip->enable_dma
+				&& drv_data->len > 6) {
+
+		unsigned long dma_start_addr, flags;
+
+		disable_dma(drv_data->dma_channel);
+		clear_dma_irqstat(drv_data->dma_channel);
+
+		/* config dma channel */
+		dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n");
+		set_dma_x_count(drv_data->dma_channel, drv_data->len);
+		if (cr_width == BIT_CTL_WORDSIZE) {
+			set_dma_x_modify(drv_data->dma_channel, 2);
+			dma_width = WDSIZE_16;
+		} else {
+			set_dma_x_modify(drv_data->dma_channel, 1);
+			dma_width = WDSIZE_8;
+		}
+
+		/* poll for SPI completion before start */
+		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF))
+			cpu_relax();
+
+		/* dirty hack for autobuffer DMA mode */
+		if (drv_data->tx_dma == 0xFFFF) {
+			dev_dbg(&drv_data->pdev->dev,
+				"doing autobuffer DMA out.\n");
+
+			/* no irq in autobuffer mode */
+			dma_config =
+			    (DMAFLOW_AUTO | RESTART | dma_width | DI_EN);
+			set_dma_config(drv_data->dma_channel, dma_config);
+			set_dma_start_addr(drv_data->dma_channel,
+					(unsigned long)drv_data->tx);
+			enable_dma(drv_data->dma_channel);
+
+			/* start SPI transfer */
+			bfin_write(&drv_data->regs->ctl, cr | BIT_CTL_TIMOD_DMA_TX);
+
+			/* just return here, there can only be one transfer
+			 * in this mode
+			 */
+			message->status = 0;
+			bfin_spi_giveback(drv_data);
+			return;
+		}
+
+		/* In dma mode, rx or tx must be NULL in one transfer */
+		dma_config = (RESTART | dma_width | DI_EN);
+		if (drv_data->rx != NULL) {
+			/* set transfer mode, and enable SPI */
+			dev_dbg(&drv_data->pdev->dev, "doing DMA in to %p (size %zx)\n",
+				drv_data->rx, drv_data->len_in_bytes);
+
+			/* invalidate caches, if needed */
+			if (bfin_addr_dcacheable((unsigned long) drv_data->rx))
+				invalidate_dcache_range((unsigned long) drv_data->rx,
+							(unsigned long) (drv_data->rx +
+							drv_data->len_in_bytes));
+
+			dma_config |= WNR;
+			dma_start_addr = (unsigned long)drv_data->rx;
+			cr |= BIT_CTL_TIMOD_DMA_RX | BIT_CTL_SENDOPT;
+
+		} else if (drv_data->tx != NULL) {
+			dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n");
+
+			/* flush caches, if needed */
+			if (bfin_addr_dcacheable((unsigned long) drv_data->tx))
+				flush_dcache_range((unsigned long) drv_data->tx,
+						(unsigned long) (drv_data->tx +
+						drv_data->len_in_bytes));
+
+			dma_start_addr = (unsigned long)drv_data->tx;
+			cr |= BIT_CTL_TIMOD_DMA_TX;
+
+		} else
+			BUG();
+
+		/* oh man, here there be monsters ... and i dont mean the
+		 * fluffy cute ones from pixar, i mean the kind that'll eat
+		 * your data, kick your dog, and love it all.  do *not* try
+		 * and change these lines unless you (1) heavily test DMA
+		 * with SPI flashes on a loaded system (e.g. ping floods),
+		 * (2) know just how broken the DMA engine interaction with
+		 * the SPI peripheral is, and (3) have someone else to blame
+		 * when you screw it all up anyways.
+		 */
+		set_dma_start_addr(drv_data->dma_channel, dma_start_addr);
+		set_dma_config(drv_data->dma_channel, dma_config);
+		local_irq_save(flags);
+		SSYNC();
+		bfin_write(&drv_data->regs->ctl, cr);
+		enable_dma(drv_data->dma_channel);
+		dma_enable_irq(drv_data->dma_channel);
+		local_irq_restore(flags);
+
+		return;
+	}
+
+	/*
+	 * We always use SPI_WRITE mode (transfer starts with TDBR write).
+	 * SPI_READ mode (transfer starts with RDBR read) seems to have
+	 * problems with setting up the output value in TDBR prior to the
+	 * start of the transfer.
+	 */
+	bfin_write(&drv_data->regs->ctl, cr | BIT_CTL_TXMOD);
+
+	if (chip->pio_interrupt) {
+		/* SPI irq should have been disabled by now */
+
+		/* discard old RX data and clear RXS */
+		bfin_spi_dummy_read(drv_data);
+
+		/* start transfer */
+		if (drv_data->tx == NULL)
+			bfin_write(&drv_data->regs->tdbr, chip->idle_tx_val);
+		else {
+			int loop;
+			if (bits_per_word == 16) {
+				u16 *buf = (u16 *)drv_data->tx;
+				for (loop = 0; loop < bits_per_word / 16;
+						loop++) {
+					bfin_write(&drv_data->regs->tdbr, *buf++);
+				}
+			} else if (bits_per_word == 8) {
+				u8 *buf = (u8 *)drv_data->tx;
+				for (loop = 0; loop < bits_per_word / 8; loop++)
+					bfin_write(&drv_data->regs->tdbr, *buf++);
+			}
+
+			drv_data->tx += drv_data->n_bytes;
+		}
+
+		/* once TDBR is empty, interrupt is triggered */
+		enable_irq(drv_data->spi_irq);
+		return;
+	}
+
+	/* IO mode */
+	dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n");
+
+	if (full_duplex) {
+		/* full duplex mode */
+		BUG_ON((drv_data->tx_end - drv_data->tx) !=
+		       (drv_data->rx_end - drv_data->rx));
+		dev_dbg(&drv_data->pdev->dev,
+			"IO duplex: cr is 0x%x\n", cr);
+
+		drv_data->ops->duplex(drv_data);
+
+		if (drv_data->tx != drv_data->tx_end)
+			tranf_success = 0;
+	} else if (drv_data->tx != NULL) {
+		/* write only half duplex */
+		dev_dbg(&drv_data->pdev->dev,
+			"IO write: cr is 0x%x\n", cr);
+
+		drv_data->ops->write(drv_data);
+
+		if (drv_data->tx != drv_data->tx_end)
+			tranf_success = 0;
+	} else if (drv_data->rx != NULL) {
+		/* read only half duplex */
+		dev_dbg(&drv_data->pdev->dev,
+			"IO read: cr is 0x%x\n", cr);
+
+		drv_data->ops->read(drv_data);
+		if (drv_data->rx != drv_data->rx_end)
+			tranf_success = 0;
+	}
+
+	if (!tranf_success) {
+		dev_dbg(&drv_data->pdev->dev,
+			"IO write error!\n");
+		message->state = ERROR_STATE;
+	} else {
+		/* Update total byte transferred */
+		message->actual_length += drv_data->len_in_bytes;
+		/* Move to next transfer of this msg */
+		message->state = bfin_spi_next_transfer(drv_data);
+		if (drv_data->cs_change && message->state != DONE_STATE) {
+			bfin_spi_flush(drv_data);
+			bfin_spi_cs_deactive(drv_data, chip);
+		}
+	}
+
+	/* Schedule next transfer tasklet */
+	tasklet_schedule(&drv_data->pump_transfers);
+}
+
+/* pop a msg from queue and kick off real transfer */
+static void bfin_spi_pump_messages(struct work_struct *work)
+{
+	struct bfin_spi_master_data *drv_data;
+	unsigned long flags;
+
+	drv_data = container_of(work, struct bfin_spi_master_data, pump_messages);
+
+	/* Lock queue and check for queue work */
+	spin_lock_irqsave(&drv_data->lock, flags);
+	if (list_empty(&drv_data->queue) || !drv_data->running) {
+		/* pumper kicked off but no work to do */
+		drv_data->busy = 0;
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Make sure we are not already running a message */
+	if (drv_data->cur_msg) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Extract head of queue */
+	drv_data->cur_msg = list_entry(drv_data->queue.next,
+				       struct spi_message, queue);
+
+	/* Setup the SSP using the per chip configuration */
+	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+	bfin_spi_restore_state(drv_data);
+
+	list_del_init(&drv_data->cur_msg->queue);
+
+	/* Initial message state */
+	drv_data->cur_msg->state = START_STATE;
+	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
+					    struct spi_transfer, transfer_list);
+
+	dev_dbg(&drv_data->pdev->dev,
+		"got a message to pump, state is set to: baud "
+		"%d, flag 0x%x, ctl 0x%x\n",
+		drv_data->cur_chip->baud, drv_data->cur_chip->flag,
+		drv_data->cur_chip->ctl_reg);
+
+	dev_dbg(&drv_data->pdev->dev,
+		"the first transfer len is %d\n",
+		drv_data->cur_transfer->len);
+
+	/* Mark as busy and launch transfers */
+	tasklet_schedule(&drv_data->pump_transfers);
+
+	drv_data->busy = 1;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+}
+
+/*
+ * got a msg to transfer, queue it in drv_data->queue.
+ * And kick off message pumper
+ */
+static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master);
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (!drv_data->running) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	msg->actual_length = 0;
+	msg->status = -EINPROGRESS;
+	msg->state = START_STATE;
+
+	dev_dbg(&spi->dev, "adding an msg in transfer() \n");
+	list_add_tail(&msg->queue, &drv_data->queue);
+
+	if (drv_data->running && !drv_data->busy)
+		queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return 0;
+}
+
+#define MAX_SPI_SSEL	7
+
+static const u16 ssel[][MAX_SPI_SSEL] = {
+	{P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
+	P_SPI0_SSEL4, P_SPI0_SSEL5,
+	P_SPI0_SSEL6, P_SPI0_SSEL7},
+
+	{P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3,
+	P_SPI1_SSEL4, P_SPI1_SSEL5,
+	P_SPI1_SSEL6, P_SPI1_SSEL7},
+
+	{P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3,
+	P_SPI2_SSEL4, P_SPI2_SSEL5,
+	P_SPI2_SSEL6, P_SPI2_SSEL7},
+};
+
+/* setup for devices (may be called multiple times -- not just first setup) */
+static int bfin_spi_setup(struct spi_device *spi)
+{
+	struct bfin5xx_spi_chip *chip_info;
+	struct bfin_spi_slave_data *chip = NULL;
+	struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master);
+	u16 bfin_ctl_reg;
+	int ret = -EINVAL;
+
+	/* Only alloc (or use chip_info) on first setup */
+	chip_info = NULL;
+	chip = spi_get_ctldata(spi);
+	if (chip == NULL) {
+		chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+		if (!chip) {
+			dev_err(&spi->dev, "cannot allocate chip data\n");
+			ret = -ENOMEM;
+			goto error;
+		}
+
+		chip->enable_dma = 0;
+		chip_info = spi->controller_data;
+	}
+
+	/* Let people set non-standard bits directly */
+	bfin_ctl_reg = BIT_CTL_OPENDRAIN | BIT_CTL_EMISO |
+		BIT_CTL_PSSE | BIT_CTL_GM | BIT_CTL_SZ;
+
+	/* chip_info isn't always needed */
+	if (chip_info) {
+		/* Make sure people stop trying to set fields via ctl_reg
+		 * when they should actually be using common SPI framework.
+		 * Currently we let through: WOM EMISO PSSE GM SZ.
+		 * Not sure if a user actually needs/uses any of these,
+		 * but let's assume (for now) they do.
+		 */
+		if (chip_info->ctl_reg & ~bfin_ctl_reg) {
+			dev_err(&spi->dev,
+				"do not set bits in ctl_reg that the SPI framework manages\n");
+			goto error;
+		}
+		chip->enable_dma = chip_info->enable_dma != 0
+		    && drv_data->master_info->enable_dma;
+		chip->ctl_reg = chip_info->ctl_reg;
+		chip->cs_chg_udelay = chip_info->cs_chg_udelay;
+		chip->idle_tx_val = chip_info->idle_tx_val;
+		chip->pio_interrupt = chip_info->pio_interrupt;
+	} else {
+		/* force a default base state */
+		chip->ctl_reg &= bfin_ctl_reg;
+	}
+
+	/* translate common spi framework into our register */
+	if (spi->mode & SPI_CPOL)
+		chip->ctl_reg |= BIT_CTL_CPOL;
+	if (spi->mode & SPI_CPHA)
+		chip->ctl_reg |= BIT_CTL_CPHA;
+	if (spi->mode & SPI_LSB_FIRST)
+		chip->ctl_reg |= BIT_CTL_LSBF;
+	/* we dont support running in slave mode (yet?) */
+	chip->ctl_reg |= BIT_CTL_MASTER;
+
+	/*
+	 * Notice: for blackfin, the speed_hz is the value of register
+	 * SPI_BAUD, not the real baudrate
+	 */
+	chip->baud = hz_to_spi_baud(spi->max_speed_hz);
+	chip->chip_select_num = spi->chip_select;
+	if (chip->chip_select_num < MAX_CTRL_CS) {
+		if (!(spi->mode & SPI_CPHA))
+			dev_warn(&spi->dev,
+				"Warning: SPI CPHA not set: Slave Select not under software control!\n"
+				"See Documentation/blackfin/bfin-spi-notes.txt\n");
+
+		chip->flag = (1 << spi->chip_select) << 8;
+	} else
+		chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS;
+
+	if (chip->enable_dma && chip->pio_interrupt) {
+		dev_err(&spi->dev,
+			"enable_dma is set, do not set pio_interrupt\n");
+		goto error;
+	}
+	/*
+	 * if any one SPI chip is registered and wants DMA, request the
+	 * DMA channel for it
+	 */
+	if (chip->enable_dma && !drv_data->dma_requested) {
+		/* register dma irq handler */
+		ret = request_dma(drv_data->dma_channel, "BFIN_SPI_DMA");
+		if (ret) {
+			dev_err(&spi->dev,
+				"Unable to request BlackFin SPI DMA channel\n");
+			goto error;
+		}
+		drv_data->dma_requested = 1;
+
+		ret = set_dma_callback(drv_data->dma_channel,
+			bfin_spi_dma_irq_handler, drv_data);
+		if (ret) {
+			dev_err(&spi->dev, "Unable to set dma callback\n");
+			goto error;
+		}
+		dma_disable_irq(drv_data->dma_channel);
+	}
+
+	if (chip->pio_interrupt && !drv_data->irq_requested) {
+		ret = request_irq(drv_data->spi_irq, bfin_spi_pio_irq_handler,
+			0, "BFIN_SPI", drv_data);
+		if (ret) {
+			dev_err(&spi->dev, "Unable to register spi IRQ\n");
+			goto error;
+		}
+		drv_data->irq_requested = 1;
+		/* we use write mode, spi irq has to be disabled here */
+		disable_irq(drv_data->spi_irq);
+	}
+
+	if (chip->chip_select_num >= MAX_CTRL_CS) {
+		/* Only request on first setup */
+		if (spi_get_ctldata(spi) == NULL) {
+			ret = gpio_request(chip->cs_gpio, spi->modalias);
+			if (ret) {
+				dev_err(&spi->dev, "gpio_request() error\n");
+				goto pin_error;
+			}
+			gpio_direction_output(chip->cs_gpio, 1);
+		}
+	}
+
+	dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n",
+			spi->modalias, spi->bits_per_word, chip->enable_dma);
+	dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n",
+			chip->ctl_reg, chip->flag);
+
+	spi_set_ctldata(spi, chip);
+
+	dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num);
+	if (chip->chip_select_num < MAX_CTRL_CS) {
+		ret = peripheral_request(ssel[spi->master->bus_num]
+		                         [chip->chip_select_num-1], spi->modalias);
+		if (ret) {
+			dev_err(&spi->dev, "peripheral_request() error\n");
+			goto pin_error;
+		}
+	}
+
+	bfin_spi_cs_enable(drv_data, chip);
+	bfin_spi_cs_deactive(drv_data, chip);
+
+	return 0;
+
+ pin_error:
+	if (chip->chip_select_num >= MAX_CTRL_CS)
+		gpio_free(chip->cs_gpio);
+	else
+		peripheral_free(ssel[spi->master->bus_num]
+			[chip->chip_select_num - 1]);
+ error:
+	if (chip) {
+		if (drv_data->dma_requested)
+			free_dma(drv_data->dma_channel);
+		drv_data->dma_requested = 0;
+
+		kfree(chip);
+		/* prevent free 'chip' twice */
+		spi_set_ctldata(spi, NULL);
+	}
+
+	return ret;
+}
+
+/*
+ * callback for spi framework.
+ * clean driver specific data
+ */
+static void bfin_spi_cleanup(struct spi_device *spi)
+{
+	struct bfin_spi_slave_data *chip = spi_get_ctldata(spi);
+	struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master);
+
+	if (!chip)
+		return;
+
+	if (chip->chip_select_num < MAX_CTRL_CS) {
+		peripheral_free(ssel[spi->master->bus_num]
+					[chip->chip_select_num-1]);
+		bfin_spi_cs_disable(drv_data, chip);
+	} else
+		gpio_free(chip->cs_gpio);
+
+	kfree(chip);
+	/* prevent free 'chip' twice */
+	spi_set_ctldata(spi, NULL);
+}
+
+static int bfin_spi_init_queue(struct bfin_spi_master_data *drv_data)
+{
+	INIT_LIST_HEAD(&drv_data->queue);
+	spin_lock_init(&drv_data->lock);
+
+	drv_data->running = false;
+	drv_data->busy = 0;
+
+	/* init transfer tasklet */
+	tasklet_init(&drv_data->pump_transfers,
+		     bfin_spi_pump_transfers, (unsigned long)drv_data);
+
+	/* init messages workqueue */
+	INIT_WORK(&drv_data->pump_messages, bfin_spi_pump_messages);
+	drv_data->workqueue = create_singlethread_workqueue(
+				dev_name(drv_data->master->dev.parent));
+	if (drv_data->workqueue == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+static int bfin_spi_start_queue(struct bfin_spi_master_data *drv_data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->running || drv_data->busy) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -EBUSY;
+	}
+
+	drv_data->running = true;
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	return 0;
+}
+
+static int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data)
+{
+	unsigned long flags;
+	unsigned limit = 500;
+	int status = 0;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	/*
+	 * This is a bit lame, but is optimized for the common execution path.
+	 * A wait_queue on the drv_data->busy could be used, but then the common
+	 * execution path (pump_messages) would be required to call wake_up or
+	 * friends on every SPI message. Do this instead
+	 */
+	drv_data->running = false;
+	while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		msleep(10);
+		spin_lock_irqsave(&drv_data->lock, flags);
+	}
+
+	if (!list_empty(&drv_data->queue) || drv_data->busy)
+		status = -EBUSY;
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return status;
+}
+
+static int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data)
+{
+	int status;
+
+	status = bfin_spi_stop_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	destroy_workqueue(drv_data->workqueue);
+
+	return 0;
+}
+
+static int bfin_spi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bfin5xx_spi_master *platform_info;
+	struct spi_master *master;
+	struct bfin_spi_master_data *drv_data;
+	struct resource *res;
+	int status = 0;
+
+	platform_info = dev_get_platdata(dev);
+
+	/* Allocate master with space for drv_data */
+	master = spi_alloc_master(dev, sizeof(*drv_data));
+	if (!master) {
+		dev_err(&pdev->dev, "can not alloc spi_master\n");
+		return -ENOMEM;
+	}
+
+	drv_data = spi_master_get_devdata(master);
+	drv_data->master = master;
+	drv_data->master_info = platform_info;
+	drv_data->pdev = pdev;
+	drv_data->pin_req = platform_info->pin_req;
+
+	/* the spi->mode bits supported by this driver: */
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
+	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+	master->bus_num = pdev->id;
+	master->num_chipselect = platform_info->num_chipselect;
+	master->cleanup = bfin_spi_cleanup;
+	master->setup = bfin_spi_setup;
+	master->transfer = bfin_spi_transfer;
+
+	/* Find and map our resources */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "Cannot get IORESOURCE_MEM\n");
+		status = -ENOENT;
+		goto out_error_get_res;
+	}
+
+	drv_data->regs = ioremap(res->start, resource_size(res));
+	if (drv_data->regs == NULL) {
+		dev_err(dev, "Cannot map IO\n");
+		status = -ENXIO;
+		goto out_error_ioremap;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (res == NULL) {
+		dev_err(dev, "No DMA channel specified\n");
+		status = -ENOENT;
+		goto out_error_free_io;
+	}
+	drv_data->dma_channel = res->start;
+
+	drv_data->spi_irq = platform_get_irq(pdev, 0);
+	if (drv_data->spi_irq < 0) {
+		dev_err(dev, "No spi pio irq specified\n");
+		status = -ENOENT;
+		goto out_error_free_io;
+	}
+
+	/* Initial and start queue */
+	status = bfin_spi_init_queue(drv_data);
+	if (status != 0) {
+		dev_err(dev, "problem initializing queue\n");
+		goto out_error_queue_alloc;
+	}
+
+	status = bfin_spi_start_queue(drv_data);
+	if (status != 0) {
+		dev_err(dev, "problem starting queue\n");
+		goto out_error_queue_alloc;
+	}
+
+	status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
+	if (status != 0) {
+		dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
+		goto out_error_queue_alloc;
+	}
+
+	/* Reset SPI registers. If these registers were used by the boot loader,
+	 * the sky may fall on your head if you enable the dma controller.
+	 */
+	bfin_write(&drv_data->regs->ctl, BIT_CTL_CPHA | BIT_CTL_MASTER);
+	bfin_write(&drv_data->regs->flg, 0xFF00);
+
+	/* Register with the SPI framework */
+	platform_set_drvdata(pdev, drv_data);
+	status = spi_register_master(master);
+	if (status != 0) {
+		dev_err(dev, "problem registering spi master\n");
+		goto out_error_queue_alloc;
+	}
+
+	dev_info(dev, "%s, Version %s, regs@%p, dma channel@%d\n",
+		DRV_DESC, DRV_VERSION, drv_data->regs,
+		drv_data->dma_channel);
+	return status;
+
+out_error_queue_alloc:
+	bfin_spi_destroy_queue(drv_data);
+out_error_free_io:
+	iounmap(drv_data->regs);
+out_error_ioremap:
+out_error_get_res:
+	spi_master_put(master);
+
+	return status;
+}
+
+/* stop hardware and remove the driver */
+static int bfin_spi_remove(struct platform_device *pdev)
+{
+	struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev);
+	int status = 0;
+
+	if (!drv_data)
+		return 0;
+
+	/* Remove the queue */
+	status = bfin_spi_destroy_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	/* Disable the SSP at the peripheral and SOC level */
+	bfin_spi_disable(drv_data);
+
+	/* Release DMA */
+	if (drv_data->master_info->enable_dma) {
+		if (dma_channel_active(drv_data->dma_channel))
+			free_dma(drv_data->dma_channel);
+	}
+
+	if (drv_data->irq_requested) {
+		free_irq(drv_data->spi_irq, drv_data);
+		drv_data->irq_requested = 0;
+	}
+
+	/* Disconnect from the SPI framework */
+	spi_unregister_master(drv_data->master);
+
+	peripheral_free_list(drv_data->pin_req);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bfin_spi_suspend(struct device *dev)
+{
+	struct bfin_spi_master_data *drv_data = dev_get_drvdata(dev);
+	int status = 0;
+
+	status = bfin_spi_stop_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	drv_data->ctrl_reg = bfin_read(&drv_data->regs->ctl);
+	drv_data->flag_reg = bfin_read(&drv_data->regs->flg);
+
+	/*
+	 * reset SPI_CTL and SPI_FLG registers
+	 */
+	bfin_write(&drv_data->regs->ctl, BIT_CTL_CPHA | BIT_CTL_MASTER);
+	bfin_write(&drv_data->regs->flg, 0xFF00);
+
+	return 0;
+}
+
+static int bfin_spi_resume(struct device *dev)
+{
+	struct bfin_spi_master_data *drv_data = dev_get_drvdata(dev);
+	int status = 0;
+
+	bfin_write(&drv_data->regs->ctl, drv_data->ctrl_reg);
+	bfin_write(&drv_data->regs->flg, drv_data->flag_reg);
+
+	/* Start the queue running */
+	status = bfin_spi_start_queue(drv_data);
+	if (status != 0) {
+		dev_err(dev, "problem starting queue (%d)\n", status);
+		return status;
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(bfin_spi_pm_ops, bfin_spi_suspend, bfin_spi_resume);
+
+#define BFIN_SPI_PM_OPS		(&bfin_spi_pm_ops)
+#else
+#define BFIN_SPI_PM_OPS		NULL
+#endif
+
+MODULE_ALIAS("platform:bfin-spi");
+static struct platform_driver bfin_spi_driver = {
+	.driver	= {
+		.name	= DRV_NAME,
+		.pm	= BFIN_SPI_PM_OPS,
+	},
+	.probe		= bfin_spi_probe,
+	.remove		= bfin_spi_remove,
+};
+
+static int __init bfin_spi_init(void)
+{
+	return platform_driver_register(&bfin_spi_driver);
+}
+subsys_initcall(bfin_spi_init);
+
+static void __exit bfin_spi_exit(void)
+{
+	platform_driver_unregister(&bfin_spi_driver);
+}
+module_exit(bfin_spi_exit);