Initial import

1 files changed, 547 insertions, 0 deletions

diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
new file mode 100644
index 000000000..1c34c9314
--- /dev/null
+++ b/drivers/spi/spi-gpio.c
@@ -0,0 +1,547 @@
+/*
+ * SPI master driver using generic bitbanged GPIO
+ *
+ * Copyright (C) 2006,2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/spi/spi_gpio.h>
+
+
+/*
+ * This bitbanging SPI master driver should help make systems usable
+ * when a native hardware SPI engine is not available, perhaps because
+ * its driver isn't yet working or because the I/O pins it requires
+ * are used for other purposes.
+ *
+ * platform_device->driver_data ... points to spi_gpio
+ *
+ * spi->controller_state ... reserved for bitbang framework code
+ * spi->controller_data ... holds chipselect GPIO
+ *
+ * spi->master->dev.driver_data ... points to spi_gpio->bitbang
+ */
+
+struct spi_gpio {
+	struct spi_bitbang		bitbang;
+	struct spi_gpio_platform_data	pdata;
+	struct platform_device		*pdev;
+	unsigned long			cs_gpios[0];
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Because the overhead of going through four GPIO procedure calls
+ * per transferred bit can make performance a problem, this code
+ * is set up so that you can use it in either of two ways:
+ *
+ *   - The slow generic way:  set up platform_data to hold the GPIO
+ *     numbers used for MISO/MOSI/SCK, and issue procedure calls for
+ *     each of them.  This driver can handle several such busses.
+ *
+ *   - The quicker inlined way:  only helps with platform GPIO code
+ *     that inlines operations for constant GPIOs.  This can give
+ *     you tight (fast!) inner loops, but each such bus needs a
+ *     new driver.  You'll define a new C file, with Makefile and
+ *     Kconfig support; the C code can be a total of six lines:
+ *
+ *		#define DRIVER_NAME	"myboard_spi2"
+ *		#define	SPI_MISO_GPIO	119
+ *		#define	SPI_MOSI_GPIO	120
+ *		#define	SPI_SCK_GPIO	121
+ *		#define	SPI_N_CHIPSEL	4
+ *		#include "spi-gpio.c"
+ */
+
+#ifndef DRIVER_NAME
+#define DRIVER_NAME	"spi_gpio"
+
+#define GENERIC_BITBANG	/* vs tight inlines */
+
+/* all functions referencing these symbols must define pdata */
+#define SPI_MISO_GPIO	((pdata)->miso)
+#define SPI_MOSI_GPIO	((pdata)->mosi)
+#define SPI_SCK_GPIO	((pdata)->sck)
+
+#define SPI_N_CHIPSEL	((pdata)->num_chipselect)
+
+#endif
+
+/*----------------------------------------------------------------------*/
+
+static inline struct spi_gpio *__pure
+spi_to_spi_gpio(const struct spi_device *spi)
+{
+	const struct spi_bitbang	*bang;
+	struct spi_gpio			*spi_gpio;
+
+	bang = spi_master_get_devdata(spi->master);
+	spi_gpio = container_of(bang, struct spi_gpio, bitbang);
+	return spi_gpio;
+}
+
+static inline struct spi_gpio_platform_data *__pure
+spi_to_pdata(const struct spi_device *spi)
+{
+	return &spi_to_spi_gpio(spi)->pdata;
+}
+
+/* this is #defined to avoid unused-variable warnings when inlining */
+#define pdata		spi_to_pdata(spi)
+
+static inline void setsck(const struct spi_device *spi, int is_on)
+{
+	gpio_set_value_cansleep(SPI_SCK_GPIO, is_on);
+}
+
+static inline void setmosi(const struct spi_device *spi, int is_on)
+{
+	gpio_set_value_cansleep(SPI_MOSI_GPIO, is_on);
+}
+
+static inline int getmiso(const struct spi_device *spi)
+{
+	return !!gpio_get_value_cansleep(SPI_MISO_GPIO);
+}
+
+#undef pdata
+
+/*
+ * NOTE:  this clocks "as fast as we can".  It "should" be a function of the
+ * requested device clock.  Software overhead means we usually have trouble
+ * reaching even one Mbit/sec (except when we can inline bitops), so for now
+ * we'll just assume we never need additional per-bit slowdowns.
+ */
+#define spidelay(nsecs)	do {} while (0)
+
+#include "spi-bitbang-txrx.h"
+
+/*
+ * These functions can leverage inline expansion of GPIO calls to shrink
+ * costs for a txrx bit, often by factors of around ten (by instruction
+ * count).  That is particularly visible for larger word sizes, but helps
+ * even with default 8-bit words.
+ *
+ * REVISIT overheads calling these functions for each word also have
+ * significant performance costs.  Having txrx_bufs() calls that inline
+ * the txrx_word() logic would help performance, e.g. on larger blocks
+ * used with flash storage or MMC/SD.  There should also be ways to make
+ * GCC be less stupid about reloading registers inside the I/O loops,
+ * even without inlined GPIO calls; __attribute__((hot)) on GCC 4.3?
+ */
+
+static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
+}
+
+static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
+}
+
+static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
+}
+
+static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
+}
+
+/*
+ * These functions do not call setmosi or getmiso if respective flag
+ * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to
+ * call when such pin is not present or defined in the controller.
+ * A separate set of callbacks is defined to get highest possible
+ * speed in the generic case (when both MISO and MOSI lines are
+ * available), as optimiser will remove the checks when argument is
+ * constant.
+ */
+
+static u32 spi_gpio_spec_txrx_word_mode0(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	unsigned flags = spi->master->flags;
+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode1(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	unsigned flags = spi->master->flags;
+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode2(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	unsigned flags = spi->master->flags;
+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
+}
+
+static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi,
+		unsigned nsecs, u32 word, u8 bits)
+{
+	unsigned flags = spi->master->flags;
+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
+}
+
+/*----------------------------------------------------------------------*/
+
+static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
+{
+	struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi);
+	unsigned long cs = spi_gpio->cs_gpios[spi->chip_select];
+
+	/* set initial clock polarity */
+	if (is_active)
+		setsck(spi, spi->mode & SPI_CPOL);
+
+	if (cs != SPI_GPIO_NO_CHIPSELECT) {
+		/* SPI is normally active-low */
+		gpio_set_value_cansleep(cs, (spi->mode & SPI_CS_HIGH) ? is_active : !is_active);
+	}
+}
+
+static int spi_gpio_setup(struct spi_device *spi)
+{
+	unsigned long		cs;
+	int			status = 0;
+	struct spi_gpio		*spi_gpio = spi_to_spi_gpio(spi);
+	struct device_node	*np = spi->master->dev.of_node;
+
+	if (np) {
+		/*
+		 * In DT environments, the CS GPIOs have already been
+		 * initialized from the "cs-gpios" property of the node.
+		 */
+		cs = spi_gpio->cs_gpios[spi->chip_select];
+	} else {
+		/*
+		 * ... otherwise, take it from spi->controller_data
+		 */
+		cs = (uintptr_t) spi->controller_data;
+	}
+
+	if (!spi->controller_state) {
+		if (cs != SPI_GPIO_NO_CHIPSELECT) {
+			status = gpio_request(cs, dev_name(&spi->dev));
+			if (status)
+				return status;
+			status = gpio_direction_output(cs,
+					!(spi->mode & SPI_CS_HIGH));
+		}
+	}
+	if (!status) {
+		/* in case it was initialized from static board data */
+		spi_gpio->cs_gpios[spi->chip_select] = cs;
+		status = spi_bitbang_setup(spi);
+	}
+
+	if (status) {
+		if (!spi->controller_state && cs != SPI_GPIO_NO_CHIPSELECT)
+			gpio_free(cs);
+	}
+	return status;
+}
+
+static void spi_gpio_cleanup(struct spi_device *spi)
+{
+	struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi);
+	unsigned long cs = spi_gpio->cs_gpios[spi->chip_select];
+
+	if (cs != SPI_GPIO_NO_CHIPSELECT)
+		gpio_free(cs);
+	spi_bitbang_cleanup(spi);
+}
+
+static int spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
+{
+	int value;
+
+	value = gpio_request(pin, label);
+	if (value == 0) {
+		if (is_in)
+			value = gpio_direction_input(pin);
+		else
+			value = gpio_direction_output(pin, 0);
+	}
+	return value;
+}
+
+static int spi_gpio_request(struct spi_gpio_platform_data *pdata,
+			    const char *label, u16 *res_flags)
+{
+	int value;
+
+	/* NOTE:  SPI_*_GPIO symbols may reference "pdata" */
+
+	if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) {
+		value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
+		if (value)
+			goto done;
+	} else {
+		/* HW configuration without MOSI pin */
+		*res_flags |= SPI_MASTER_NO_TX;
+	}
+
+	if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) {
+		value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
+		if (value)
+			goto free_mosi;
+	} else {
+		/* HW configuration without MISO pin */
+		*res_flags |= SPI_MASTER_NO_RX;
+	}
+
+	value = spi_gpio_alloc(SPI_SCK_GPIO, label, false);
+	if (value)
+		goto free_miso;
+
+	goto done;
+
+free_miso:
+	if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+		gpio_free(SPI_MISO_GPIO);
+free_mosi:
+	if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+		gpio_free(SPI_MOSI_GPIO);
+done:
+	return value;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id spi_gpio_dt_ids[] = {
+	{ .compatible = "spi-gpio" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spi_gpio_dt_ids);
+
+static int spi_gpio_probe_dt(struct platform_device *pdev)
+{
+	int ret;
+	u32 tmp;
+	struct spi_gpio_platform_data	*pdata;
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id =
+			of_match_device(spi_gpio_dt_ids, &pdev->dev);
+
+	if (!of_id)
+		return 0;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	ret = of_get_named_gpio(np, "gpio-sck", 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "gpio-sck property not found\n");
+		goto error_free;
+	}
+	pdata->sck = ret;
+
+	ret = of_get_named_gpio(np, "gpio-miso", 0);
+	if (ret < 0) {
+		dev_info(&pdev->dev, "gpio-miso property not found, switching to no-rx mode\n");
+		pdata->miso = SPI_GPIO_NO_MISO;
+	} else
+		pdata->miso = ret;
+
+	ret = of_get_named_gpio(np, "gpio-mosi", 0);
+	if (ret < 0) {
+		dev_info(&pdev->dev, "gpio-mosi property not found, switching to no-tx mode\n");
+		pdata->mosi = SPI_GPIO_NO_MOSI;
+	} else
+		pdata->mosi = ret;
+
+	ret = of_property_read_u32(np, "num-chipselects", &tmp);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "num-chipselects property not found\n");
+		goto error_free;
+	}
+
+	pdata->num_chipselect = tmp;
+	pdev->dev.platform_data = pdata;
+
+	return 1;
+
+error_free:
+	devm_kfree(&pdev->dev, pdata);
+	return ret;
+}
+#else
+static inline int spi_gpio_probe_dt(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
+static int spi_gpio_probe(struct platform_device *pdev)
+{
+	int				status;
+	struct spi_master		*master;
+	struct spi_gpio			*spi_gpio;
+	struct spi_gpio_platform_data	*pdata;
+	u16 master_flags = 0;
+	bool use_of = 0;
+	int num_devices;
+
+	status = spi_gpio_probe_dt(pdev);
+	if (status < 0)
+		return status;
+	if (status > 0)
+		use_of = 1;
+
+	pdata = dev_get_platdata(&pdev->dev);
+#ifdef GENERIC_BITBANG
+	if (!pdata || (!use_of && !pdata->num_chipselect))
+		return -ENODEV;
+#endif
+
+	if (use_of && !SPI_N_CHIPSEL)
+		num_devices = 1;
+	else
+		num_devices = SPI_N_CHIPSEL;
+
+	status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags);
+	if (status < 0)
+		return status;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*spi_gpio) +
+					(sizeof(unsigned long) * num_devices));
+	if (!master) {
+		status = -ENOMEM;
+		goto gpio_free;
+	}
+	spi_gpio = spi_master_get_devdata(master);
+	platform_set_drvdata(pdev, spi_gpio);
+
+	spi_gpio->pdev = pdev;
+	if (pdata)
+		spi_gpio->pdata = *pdata;
+
+	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
+	master->flags = master_flags;
+	master->bus_num = pdev->id;
+	master->num_chipselect = num_devices;
+	master->setup = spi_gpio_setup;
+	master->cleanup = spi_gpio_cleanup;
+#ifdef CONFIG_OF
+	master->dev.of_node = pdev->dev.of_node;
+
+	if (use_of) {
+		int i;
+		struct device_node *np = pdev->dev.of_node;
+
+		/*
+		 * In DT environments, take the CS GPIO from the "cs-gpios"
+		 * property of the node.
+		 */
+
+		if (!SPI_N_CHIPSEL)
+			spi_gpio->cs_gpios[0] = SPI_GPIO_NO_CHIPSELECT;
+		else
+			for (i = 0; i < SPI_N_CHIPSEL; i++) {
+				status = of_get_named_gpio(np, "cs-gpios", i);
+				if (status < 0) {
+					dev_err(&pdev->dev,
+						"invalid cs-gpios property\n");
+					goto gpio_free;
+				}
+				spi_gpio->cs_gpios[i] = status;
+			}
+	}
+#endif
+
+	spi_gpio->bitbang.master = master;
+	spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
+
+	if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) {
+		spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
+		spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
+		spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
+		spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
+	} else {
+		spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0;
+		spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1;
+		spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2;
+		spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
+	}
+	spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
+	spi_gpio->bitbang.flags = SPI_CS_HIGH;
+
+	status = spi_bitbang_start(&spi_gpio->bitbang);
+	if (status < 0) {
+gpio_free:
+		if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+			gpio_free(SPI_MISO_GPIO);
+		if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+			gpio_free(SPI_MOSI_GPIO);
+		gpio_free(SPI_SCK_GPIO);
+		spi_master_put(master);
+	}
+
+	return status;
+}
+
+static int spi_gpio_remove(struct platform_device *pdev)
+{
+	struct spi_gpio			*spi_gpio;
+	struct spi_gpio_platform_data	*pdata;
+
+	spi_gpio = platform_get_drvdata(pdev);
+	pdata = dev_get_platdata(&pdev->dev);
+
+	/* stop() unregisters child devices too */
+	spi_bitbang_stop(&spi_gpio->bitbang);
+
+	if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
+		gpio_free(SPI_MISO_GPIO);
+	if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
+		gpio_free(SPI_MOSI_GPIO);
+	gpio_free(SPI_SCK_GPIO);
+	spi_master_put(spi_gpio->bitbang.master);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+
+static struct platform_driver spi_gpio_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.of_match_table = of_match_ptr(spi_gpio_dt_ids),
+	},
+	.probe		= spi_gpio_probe,
+	.remove		= spi_gpio_remove,
+};
+module_platform_driver(spi_gpio_driver);
+
+MODULE_DESCRIPTION("SPI master driver using generic bitbanged GPIO ");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");